Staging: bcm: Fix checkpatch warnings for long lines.

Fixes multiple checkpatch warnings for long lines in Bcmchar.c.

Signed-off-by: Ingrid Cheung <hi@ingridcheung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index 2cf64df22938ff6cdf4ab3677aa916d2a44f5395..6385b57572fabec3be237c5efa5db7d9625e7cdb 100644 (file)
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -268,7 +268,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                                (uiTempVar == EEPROM_REJECT_REG_3) ||
                                (uiTempVar == EEPROM_REJECT_REG_4))) {
 
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                       "EEPROM Access Denied, not in VSG Mode\n");
                        return -EFAULT;
                }
 
@@ -276,9 +277,11 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                                (PUINT)sWrmBuffer.Data, sizeof(ULONG));
 
                if (Status == STATUS_SUCCESS) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL, "WRM Done\n");
                } else {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL, "WRM Failed\n");
                        Status = -EFAULT;
                }
                break;
@@ -293,7 +296,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                        (Adapter->bShutStatus == TRUE) ||
                        (Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Rdms\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                       "Device in Idle Mode, Blocking Rdms\n");
                        return -EACCES;
                }
 
@@ -319,7 +323,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                if ((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) ||
                        ((ULONG)sRdmBuffer.Register & 0x3)) {
 
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Done On invalid Address : %x Access Denied.\n",
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                       "RDM Done On invalid Address : %x Access Denied.\n",
                                        (int)sRdmBuffer.Register);
 
                        kfree(temp_buff);
@@ -327,7 +332,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                }
 
                uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK;
-               bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, (PUINT)temp_buff, IoBuffer.OutputLength);
+               bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register,
+                                      (PUINT)temp_buff, IoBuffer.OutputLength);
 
                if (bytes > 0) {
                        Status = STATUS_SUCCESS;
@@ -351,7 +357,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                        (Adapter->bShutStatus == TRUE) ||
                        (Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Wrms\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                       "Device in Idle Mode, Blocking Wrms\n");
                        return -EACCES;
                }
 
@@ -369,7 +376,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) ||
                        ((ULONG)sWrmBuffer.Register & 0x3)) {
 
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)sWrmBuffer.Register);
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                       "WRM Done On invalid Address : %x Access Denied.\n",
+                                       (int)sWrmBuffer.Register);
                        return -EINVAL;
                }
 
@@ -381,17 +390,21 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                                (uiTempVar == EEPROM_REJECT_REG_4)) &&
                                (cmd == IOCTL_BCM_REGISTER_WRITE)) {
 
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                               "EEPROM Access Denied, not in VSG Mode\n");
                                return -EFAULT;
                }
 
                Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register,
-                                       (PUINT)sWrmBuffer.Data, sWrmBuffer.Length);
+                                       (PUINT)sWrmBuffer.Data,
+                                       sWrmBuffer.Length);
 
                if (Status == STATUS_SUCCESS) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG,
+                                       DBG_LVL_ALL, "WRM Done\n");
                } else {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL, "WRM Failed\n");
                        Status = -EFAULT;
                }
                break;
@@ -407,7 +420,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                        (Adapter->bShutStatus == TRUE) ||
                        (Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL,
+                                       "GPIO Can't be set/clear in Low power Mode");
                        return -EACCES;
                }
 
@@ -425,7 +440,10 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                value = (1<<uiBit);
 
                if (IsReqGpioIsLedInNVM(Adapter, value) == false) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!", value);
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL,
+                                       "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!",
+                                       value);
                        Status = -EINVAL;
                        break;
                }
@@ -433,27 +451,42 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                /* Set - setting 1 */
                if (uiOperation) {
                        /* Set the gpio output register */
-                       Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, (PUINT)(&value), sizeof(UINT));
+                       Status = wrmaltWithLock(Adapter,
+                                               BCM_GPIO_OUTPUT_SET_REG,
+                                               (PUINT)(&value), sizeof(UINT));
 
                        if (Status == STATUS_SUCCESS) {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+                                               OSAL_DBG, DBG_LVL_ALL,
+                                               "Set the GPIO bit\n");
                        } else {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to set the %dth GPIO\n", uiBit);
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+                                               OSAL_DBG, DBG_LVL_ALL,
+                                               "Failed to set the %dth GPIO\n",
+                                               uiBit);
                                break;
                        }
                } else {
                        /* Set the gpio output register */
-                       Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)(&value), sizeof(UINT));
+                       Status = wrmaltWithLock(Adapter,
+                                               BCM_GPIO_OUTPUT_CLR_REG,
+                                               (PUINT)(&value), sizeof(UINT));
 
                        if (Status == STATUS_SUCCESS) {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+                                               OSAL_DBG, DBG_LVL_ALL,
+                                               "Set the GPIO bit\n");
                        } else {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to clear the %dth GPIO\n", uiBit);
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+                                               OSAL_DBG, DBG_LVL_ALL,
+                                               "Failed to clear the %dth GPIO\n",
+                                               uiBit);
                                break;
                        }
                }
 
-               bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT));
+               bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER,
+                                      (PUINT)ucResetValue, sizeof(UINT));
                if (bytes < 0) {
                        Status = bytes;
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
@@ -469,9 +502,13 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                                        (PUINT)ucResetValue, sizeof(UINT));
 
                if (Status == STATUS_SUCCESS) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO to output Mode\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL,
+                                       "Set the GPIO to output Mode\n");
                } else {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to put GPIO in Output Mode\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL,
+                                       "Failed to put GPIO in Output Mode\n");
                        break;
                }
        }
@@ -479,13 +516,16 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
        case BCM_LED_THREAD_STATE_CHANGE_REQ: {
                struct bcm_user_thread_req threadReq = {0};
-               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "User made LED thread InActive");
+               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+                               "User made LED thread InActive");
 
                if ((Adapter->IdleMode == TRUE) ||
                        (Adapter->bShutStatus == TRUE) ||
                        (Adapter->bPreparingForLowPowerMode == TRUE)) {
 
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL,
+                                       "GPIO Can't be set/clear in Low power Mode");
                        Status = -EACCES;
                        break;
                }
@@ -502,10 +542,14 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                /* if LED thread is running(Actively or Inactively) set it state to make inactive */
                if (Adapter->LEDInfo.led_thread_running) {
                        if (threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ) {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Activating thread req");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+                                               OSAL_DBG, DBG_LVL_ALL,
+                                               "Activating thread req");
                                Adapter->DriverState = LED_THREAD_ACTIVE;
                        } else {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DeActivating Thread req.....");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
+                                               OSAL_DBG, DBG_LVL_ALL,
+                                               "DeActivating Thread req.....");
                                Adapter->DriverState = LED_THREAD_INACTIVE;
                        }
 
@@ -542,7 +586,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
                if (bytes < 0) {
                        Status = bytes;
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Failed\n");
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                       "RDM Failed\n");
                        return Status;
                } else {
                        Status = STATUS_SUCCESS;
@@ -572,9 +617,11 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                        return -EFAULT;
 
                if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == false) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
+                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG,
+                                       DBG_LVL_ALL,
                                        "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!",
-                                       pgpio_multi_info[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap);
+                                       pgpio_multi_info[WIMAX_IDX].uiGPIOMask,
+                                       Adapter->gpioBitMap);
                        Status = -EINVAL;
                        break;
                }
@@ -592,7 +639,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                                                        (PUINT)ucResetValue, sizeof(ULONG));
 
                        if (Status != STATUS_SUCCESS) {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                               "WRM to BCM_GPIO_OUTPUT_SET_REG Failed.");
                                return Status;
                        }
 
@@ -605,7 +653,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
                                Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue, sizeof(ULONG));
 
                        if (Status != STATUS_SUCCESS) {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed.");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                               "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed.");
                                return Status;
                        }
                }
@@ -615,7 +664,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 
                        if (bytes < 0) {
                                Status = bytes;
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM to GPIO_PIN_STATE_REGISTER Failed.");
+                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,
+                                               "RDM to GPIO_PIN_STATE_REGISTER Failed.");
                                return Status;
                        } else {
                                Status = STATUS_SUCCESS;