enc28j60: Move the Microchip driver
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>
Sun, 24 Jul 2011 23:12:37 +0000 (16:12 -0700)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Sat, 13 Aug 2011 06:47:09 +0000 (23:47 -0700)
Move the Microchip driver into drivers/net/ethernet/microchip/ and
make the necessary Kconfig and Makefile changes.

CC: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/Kconfig
drivers/net/Makefile
drivers/net/enc28j60.c [deleted file]
drivers/net/enc28j60_hw.h [deleted file]
drivers/net/ethernet/Kconfig
drivers/net/ethernet/Makefile
drivers/net/ethernet/microchip/Kconfig [new file with mode: 0644]
drivers/net/ethernet/microchip/Makefile [new file with mode: 0644]
drivers/net/ethernet/microchip/enc28j60.c [new file with mode: 0644]
drivers/net/ethernet/microchip/enc28j60_hw.h [new file with mode: 0644]

index 75ca0da52ea2e2ececcacbe17fe6526b6e719901..e83f559a2c46ab89386854eefc52132b12014f1b 100644 (file)
@@ -274,23 +274,6 @@ config DM9000_FORCE_SIMPLE_PHY_POLL
          costly MII PHY reads. Note, this will not work if the chip is
          operating with an external PHY.
 
-config ENC28J60
-       tristate "ENC28J60 support"
-       depends on EXPERIMENTAL && SPI && NET_ETHERNET
-       select CRC32
-       ---help---
-         Support for the Microchip EN28J60 ethernet chip.
-
-         To compile this driver as a module, choose M here. The module will be
-         called enc28j60.
-
-config ENC28J60_WRITEVERIFY
-       bool "Enable write verify"
-       depends on ENC28J60
-       ---help---
-         Enable the verify after the buffer write useful for debugging purpose.
-         If unsure, say N.
-
 config NET_PCI
        bool "EISA, VLB, PCI and on board controllers"
        depends on ISA || EISA || PCI
index e2f1f554dd73e4c6abaa3780f8f1235853ed134c..08ee56fc607e87f685ec1c9f58dc7320f609d62d 100644 (file)
@@ -53,7 +53,6 @@ obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DM9000) += dm9000.o
-obj-$(CONFIG_ENC28J60) += enc28j60.o
 
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_ETHERNET) += ethernet/
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
deleted file mode 100644 (file)
index 2837ce2..0000000
+++ /dev/null
@@ -1,1667 +0,0 @@
-/*
- * Microchip ENC28J60 ethernet driver (MAC + PHY)
- *
- * Copyright (C) 2007 Eurek srl
- * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
- * based on enc28j60.c written by David Anders for 2.4 kernel version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-
-#include "enc28j60_hw.h"
-
-#define DRV_NAME       "enc28j60"
-#define DRV_VERSION    "1.01"
-
-#define SPI_OPLEN      1
-
-#define ENC28J60_MSG_DEFAULT   \
-       (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
-
-/* Buffer size required for the largest SPI transfer (i.e., reading a
- * frame). */
-#define SPI_TRANSFER_BUF_LEN   (4 + MAX_FRAMELEN)
-
-#define TX_TIMEOUT     (4 * HZ)
-
-/* Max TX retries in case of collision as suggested by errata datasheet */
-#define MAX_TX_RETRYCOUNT      16
-
-enum {
-       RXFILTER_NORMAL,
-       RXFILTER_MULTI,
-       RXFILTER_PROMISC
-};
-
-/* Driver local data */
-struct enc28j60_net {
-       struct net_device *netdev;
-       struct spi_device *spi;
-       struct mutex lock;
-       struct sk_buff *tx_skb;
-       struct work_struct tx_work;
-       struct work_struct irq_work;
-       struct work_struct setrx_work;
-       struct work_struct restart_work;
-       u8 bank;                /* current register bank selected */
-       u16 next_pk_ptr;        /* next packet pointer within FIFO */
-       u16 max_pk_counter;     /* statistics: max packet counter */
-       u16 tx_retry_count;
-       bool hw_enable;
-       bool full_duplex;
-       int rxfilter;
-       u32 msg_enable;
-       u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
-};
-
-/* use ethtool to change the level for any given device */
-static struct {
-       u32 msg_enable;
-} debug = { -1 };
-
-/*
- * SPI read buffer
- * wait for the SPI transfer and copy received data to destination
- */
-static int
-spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
-{
-       u8 *rx_buf = priv->spi_transfer_buf + 4;
-       u8 *tx_buf = priv->spi_transfer_buf;
-       struct spi_transfer t = {
-               .tx_buf = tx_buf,
-               .rx_buf = rx_buf,
-               .len = SPI_OPLEN + len,
-       };
-       struct spi_message msg;
-       int ret;
-
-       tx_buf[0] = ENC28J60_READ_BUF_MEM;
-       tx_buf[1] = tx_buf[2] = tx_buf[3] = 0;  /* don't care */
-
-       spi_message_init(&msg);
-       spi_message_add_tail(&t, &msg);
-       ret = spi_sync(priv->spi, &msg);
-       if (ret == 0) {
-               memcpy(data, &rx_buf[SPI_OPLEN], len);
-               ret = msg.status;
-       }
-       if (ret && netif_msg_drv(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-                       __func__, ret);
-
-       return ret;
-}
-
-/*
- * SPI write buffer
- */
-static int spi_write_buf(struct enc28j60_net *priv, int len,
-                        const u8 *data)
-{
-       int ret;
-
-       if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
-               ret = -EINVAL;
-       else {
-               priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
-               memcpy(&priv->spi_transfer_buf[1], data, len);
-               ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
-               if (ret && netif_msg_drv(priv))
-                       printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-                               __func__, ret);
-       }
-       return ret;
-}
-
-/*
- * basic SPI read operation
- */
-static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
-                          u8 addr)
-{
-       u8 tx_buf[2];
-       u8 rx_buf[4];
-       u8 val = 0;
-       int ret;
-       int slen = SPI_OPLEN;
-
-       /* do dummy read if needed */
-       if (addr & SPRD_MASK)
-               slen++;
-
-       tx_buf[0] = op | (addr & ADDR_MASK);
-       ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
-       if (ret)
-               printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-                       __func__, ret);
-       else
-               val = rx_buf[slen - 1];
-
-       return val;
-}
-
-/*
- * basic SPI write operation
- */
-static int spi_write_op(struct enc28j60_net *priv, u8 op,
-                       u8 addr, u8 val)
-{
-       int ret;
-
-       priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
-       priv->spi_transfer_buf[1] = val;
-       ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
-       if (ret && netif_msg_drv(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
-                       __func__, ret);
-       return ret;
-}
-
-static void enc28j60_soft_reset(struct enc28j60_net *priv)
-{
-       if (netif_msg_hw(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
-       spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
-       /* Errata workaround #1, CLKRDY check is unreliable,
-        * delay at least 1 mS instead */
-       udelay(2000);
-}
-
-/*
- * select the current register bank if necessary
- */
-static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
-{
-       u8 b = (addr & BANK_MASK) >> 5;
-
-       /* These registers (EIE, EIR, ESTAT, ECON2, ECON1)
-        * are present in all banks, no need to switch bank
-        */
-       if (addr >= EIE && addr <= ECON1)
-               return;
-
-       /* Clear or set each bank selection bit as needed */
-       if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) {
-               if (b & ECON1_BSEL0)
-                       spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
-                                       ECON1_BSEL0);
-               else
-                       spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
-                                       ECON1_BSEL0);
-       }
-       if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) {
-               if (b & ECON1_BSEL1)
-                       spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
-                                       ECON1_BSEL1);
-               else
-                       spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
-                                       ECON1_BSEL1);
-       }
-       priv->bank = b;
-}
-
-/*
- * Register access routines through the SPI bus.
- * Every register access comes in two flavours:
- * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
- *   atomically more than one register
- * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
- *
- * Some registers can be accessed through the bit field clear and
- * bit field set to avoid a read modify write cycle.
- */
-
-/*
- * Register bit field Set
- */
-static void nolock_reg_bfset(struct enc28j60_net *priv,
-                                     u8 addr, u8 mask)
-{
-       enc28j60_set_bank(priv, addr);
-       spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
-}
-
-static void locked_reg_bfset(struct enc28j60_net *priv,
-                                     u8 addr, u8 mask)
-{
-       mutex_lock(&priv->lock);
-       nolock_reg_bfset(priv, addr, mask);
-       mutex_unlock(&priv->lock);
-}
-
-/*
- * Register bit field Clear
- */
-static void nolock_reg_bfclr(struct enc28j60_net *priv,
-                                     u8 addr, u8 mask)
-{
-       enc28j60_set_bank(priv, addr);
-       spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
-}
-
-static void locked_reg_bfclr(struct enc28j60_net *priv,
-                                     u8 addr, u8 mask)
-{
-       mutex_lock(&priv->lock);
-       nolock_reg_bfclr(priv, addr, mask);
-       mutex_unlock(&priv->lock);
-}
-
-/*
- * Register byte read
- */
-static int nolock_regb_read(struct enc28j60_net *priv,
-                                    u8 address)
-{
-       enc28j60_set_bank(priv, address);
-       return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
-}
-
-static int locked_regb_read(struct enc28j60_net *priv,
-                                    u8 address)
-{
-       int ret;
-
-       mutex_lock(&priv->lock);
-       ret = nolock_regb_read(priv, address);
-       mutex_unlock(&priv->lock);
-
-       return ret;
-}
-
-/*
- * Register word read
- */
-static int nolock_regw_read(struct enc28j60_net *priv,
-                                    u8 address)
-{
-       int rl, rh;
-
-       enc28j60_set_bank(priv, address);
-       rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
-       rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
-
-       return (rh << 8) | rl;
-}
-
-static int locked_regw_read(struct enc28j60_net *priv,
-                                    u8 address)
-{
-       int ret;
-
-       mutex_lock(&priv->lock);
-       ret = nolock_regw_read(priv, address);
-       mutex_unlock(&priv->lock);
-
-       return ret;
-}
-
-/*
- * Register byte write
- */
-static void nolock_regb_write(struct enc28j60_net *priv,
-                                      u8 address, u8 data)
-{
-       enc28j60_set_bank(priv, address);
-       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
-}
-
-static void locked_regb_write(struct enc28j60_net *priv,
-                                      u8 address, u8 data)
-{
-       mutex_lock(&priv->lock);
-       nolock_regb_write(priv, address, data);
-       mutex_unlock(&priv->lock);
-}
-
-/*
- * Register word write
- */
-static void nolock_regw_write(struct enc28j60_net *priv,
-                                      u8 address, u16 data)
-{
-       enc28j60_set_bank(priv, address);
-       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
-       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
-                    (u8) (data >> 8));
-}
-
-static void locked_regw_write(struct enc28j60_net *priv,
-                                      u8 address, u16 data)
-{
-       mutex_lock(&priv->lock);
-       nolock_regw_write(priv, address, data);
-       mutex_unlock(&priv->lock);
-}
-
-/*
- * Buffer memory read
- * Select the starting address and execute a SPI buffer read
- */
-static void enc28j60_mem_read(struct enc28j60_net *priv,
-                                    u16 addr, int len, u8 *data)
-{
-       mutex_lock(&priv->lock);
-       nolock_regw_write(priv, ERDPTL, addr);
-#ifdef CONFIG_ENC28J60_WRITEVERIFY
-       if (netif_msg_drv(priv)) {
-               u16 reg;
-               reg = nolock_regw_read(priv, ERDPTL);
-               if (reg != addr)
-                       printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
-                               "(0x%04x - 0x%04x)\n", __func__, reg, addr);
-       }
-#endif
-       spi_read_buf(priv, len, data);
-       mutex_unlock(&priv->lock);
-}
-
-/*
- * Write packet to enc28j60 TX buffer memory
- */
-static void
-enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
-{
-       mutex_lock(&priv->lock);
-       /* Set the write pointer to start of transmit buffer area */
-       nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
-#ifdef CONFIG_ENC28J60_WRITEVERIFY
-       if (netif_msg_drv(priv)) {
-               u16 reg;
-               reg = nolock_regw_read(priv, EWRPTL);
-               if (reg != TXSTART_INIT)
-                       printk(KERN_DEBUG DRV_NAME
-                               ": %s() ERWPT:0x%04x != 0x%04x\n",
-                               __func__, reg, TXSTART_INIT);
-       }
-#endif
-       /* Set the TXND pointer to correspond to the packet size given */
-       nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
-       /* write per-packet control byte */
-       spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
-       if (netif_msg_hw(priv))
-               printk(KERN_DEBUG DRV_NAME
-                       ": %s() after control byte ERWPT:0x%04x\n",
-                       __func__, nolock_regw_read(priv, EWRPTL));
-       /* copy the packet into the transmit buffer */
-       spi_write_buf(priv, len, data);
-       if (netif_msg_hw(priv))
-               printk(KERN_DEBUG DRV_NAME
-                        ": %s() after write packet ERWPT:0x%04x, len=%d\n",
-                        __func__, nolock_regw_read(priv, EWRPTL), len);
-       mutex_unlock(&priv->lock);
-}
-
-static unsigned long msec20_to_jiffies;
-
-static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
-{
-       unsigned long timeout = jiffies + msec20_to_jiffies;
-
-       /* 20 msec timeout read */
-       while ((nolock_regb_read(priv, reg) & mask) != val) {
-               if (time_after(jiffies, timeout)) {
-                       if (netif_msg_drv(priv))
-                               dev_dbg(&priv->spi->dev,
-                                       "reg %02x ready timeout!\n", reg);
-                       return -ETIMEDOUT;
-               }
-               cpu_relax();
-       }
-       return 0;
-}
-
-/*
- * Wait until the PHY operation is complete.
- */
-static int wait_phy_ready(struct enc28j60_net *priv)
-{
-       return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
-}
-
-/*
- * PHY register read
- * PHY registers are not accessed directly, but through the MII
- */
-static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
-{
-       u16 ret;
-
-       mutex_lock(&priv->lock);
-       /* set the PHY register address */
-       nolock_regb_write(priv, MIREGADR, address);
-       /* start the register read operation */
-       nolock_regb_write(priv, MICMD, MICMD_MIIRD);
-       /* wait until the PHY read completes */
-       wait_phy_ready(priv);
-       /* quit reading */
-       nolock_regb_write(priv, MICMD, 0x00);
-       /* return the data */
-       ret  = nolock_regw_read(priv, MIRDL);
-       mutex_unlock(&priv->lock);
-
-       return ret;
-}
-
-static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
-{
-       int ret;
-
-       mutex_lock(&priv->lock);
-       /* set the PHY register address */
-       nolock_regb_write(priv, MIREGADR, address);
-       /* write the PHY data */
-       nolock_regw_write(priv, MIWRL, data);
-       /* wait until the PHY write completes and return */
-       ret = wait_phy_ready(priv);
-       mutex_unlock(&priv->lock);
-
-       return ret;
-}
-
-/*
- * Program the hardware MAC address from dev->dev_addr.
- */
-static int enc28j60_set_hw_macaddr(struct net_device *ndev)
-{
-       int ret;
-       struct enc28j60_net *priv = netdev_priv(ndev);
-
-       mutex_lock(&priv->lock);
-       if (!priv->hw_enable) {
-               if (netif_msg_drv(priv))
-                       printk(KERN_INFO DRV_NAME
-                               ": %s: Setting MAC address to %pM\n",
-                               ndev->name, ndev->dev_addr);
-               /* NOTE: MAC address in ENC28J60 is byte-backward */
-               nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
-               nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
-               nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
-               nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
-               nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
-               nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
-               ret = 0;
-       } else {
-               if (netif_msg_drv(priv))
-                       printk(KERN_DEBUG DRV_NAME
-                               ": %s() Hardware must be disabled to set "
-                               "Mac address\n", __func__);
-               ret = -EBUSY;
-       }
-       mutex_unlock(&priv->lock);
-       return ret;
-}
-
-/*
- * Store the new hardware address in dev->dev_addr, and update the MAC.
- */
-static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
-{
-       struct sockaddr *address = addr;
-
-       if (netif_running(dev))
-               return -EBUSY;
-       if (!is_valid_ether_addr(address->sa_data))
-               return -EADDRNOTAVAIL;
-
-       memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
-       return enc28j60_set_hw_macaddr(dev);
-}
-
-/*
- * Debug routine to dump useful register contents
- */
-static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
-{
-       mutex_lock(&priv->lock);
-       printk(KERN_DEBUG DRV_NAME " %s\n"
-               "HwRevID: 0x%02x\n"
-               "Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n"
-               "       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n"
-               "MAC  : MACON1 MACON3 MACON4\n"
-               "       0x%02x   0x%02x   0x%02x\n"
-               "Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
-               "       0x%04x 0x%04x 0x%04x  0x%04x  "
-               "0x%02x    0x%02x    0x%04x\n"
-               "Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n"
-               "       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
-               msg, nolock_regb_read(priv, EREVID),
-               nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
-               nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
-               nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
-               nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
-               nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
-               nolock_regw_read(priv, ERXWRPTL),
-               nolock_regw_read(priv, ERXRDPTL),
-               nolock_regb_read(priv, ERXFCON),
-               nolock_regb_read(priv, EPKTCNT),
-               nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
-               nolock_regw_read(priv, ETXNDL),
-               nolock_regb_read(priv, MACLCON1),
-               nolock_regb_read(priv, MACLCON2),
-               nolock_regb_read(priv, MAPHSUP));
-       mutex_unlock(&priv->lock);
-}
-
-/*
- * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
- */
-static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
-{
-       u16 erxrdpt;
-
-       if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
-               erxrdpt = end;
-       else
-               erxrdpt = next_packet_ptr - 1;
-
-       return erxrdpt;
-}
-
-/*
- * Calculate wrap around when reading beyond the end of the RX buffer
- */
-static u16 rx_packet_start(u16 ptr)
-{
-       if (ptr + RSV_SIZE > RXEND_INIT)
-               return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
-       else
-               return ptr + RSV_SIZE;
-}
-
-static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
-{
-       u16 erxrdpt;
-
-       if (start > 0x1FFF || end > 0x1FFF || start > end) {
-               if (netif_msg_drv(priv))
-                       printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
-                               "bad parameters!\n", __func__, start, end);
-               return;
-       }
-       /* set receive buffer start + end */
-       priv->next_pk_ptr = start;
-       nolock_regw_write(priv, ERXSTL, start);
-       erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
-       nolock_regw_write(priv, ERXRDPTL, erxrdpt);
-       nolock_regw_write(priv, ERXNDL, end);
-}
-
-static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
-{
-       if (start > 0x1FFF || end > 0x1FFF || start > end) {
-               if (netif_msg_drv(priv))
-                       printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
-                               "bad parameters!\n", __func__, start, end);
-               return;
-       }
-       /* set transmit buffer start + end */
-       nolock_regw_write(priv, ETXSTL, start);
-       nolock_regw_write(priv, ETXNDL, end);
-}
-
-/*
- * Low power mode shrinks power consumption about 100x, so we'd like
- * the chip to be in that mode whenever it's inactive.  (However, we
- * can't stay in lowpower mode during suspend with WOL active.)
- */
-static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
-{
-       if (netif_msg_drv(priv))
-               dev_dbg(&priv->spi->dev, "%s power...\n",
-                               is_low ? "low" : "high");
-
-       mutex_lock(&priv->lock);
-       if (is_low) {
-               nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
-               poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
-               poll_ready(priv, ECON1, ECON1_TXRTS, 0);
-               /* ECON2_VRPS was set during initialization */
-               nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
-       } else {
-               nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
-               poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
-               /* caller sets ECON1_RXEN */
-       }
-       mutex_unlock(&priv->lock);
-}
-
-static int enc28j60_hw_init(struct enc28j60_net *priv)
-{
-       u8 reg;
-
-       if (netif_msg_drv(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
-                       priv->full_duplex ? "FullDuplex" : "HalfDuplex");
-
-       mutex_lock(&priv->lock);
-       /* first reset the chip */
-       enc28j60_soft_reset(priv);
-       /* Clear ECON1 */
-       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
-       priv->bank = 0;
-       priv->hw_enable = false;
-       priv->tx_retry_count = 0;
-       priv->max_pk_counter = 0;
-       priv->rxfilter = RXFILTER_NORMAL;
-       /* enable address auto increment and voltage regulator powersave */
-       nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
-
-       nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
-       nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
-       mutex_unlock(&priv->lock);
-
-       /*
-        * Check the RevID.
-        * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
-        * damaged
-        */
-       reg = locked_regb_read(priv, EREVID);
-       if (netif_msg_drv(priv))
-               printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
-       if (reg == 0x00 || reg == 0xff) {
-               if (netif_msg_drv(priv))
-                       printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
-                               __func__, reg);
-               return 0;
-       }
-
-       /* default filter mode: (unicast OR broadcast) AND crc valid */
-       locked_regb_write(priv, ERXFCON,
-                           ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
-
-       /* enable MAC receive */
-       locked_regb_write(priv, MACON1,
-                           MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
-       /* enable automatic padding and CRC operations */
-       if (priv->full_duplex) {
-               locked_regb_write(priv, MACON3,
-                                   MACON3_PADCFG0 | MACON3_TXCRCEN |
-                                   MACON3_FRMLNEN | MACON3_FULDPX);
-               /* set inter-frame gap (non-back-to-back) */
-               locked_regb_write(priv, MAIPGL, 0x12);
-               /* set inter-frame gap (back-to-back) */
-               locked_regb_write(priv, MABBIPG, 0x15);
-       } else {
-               locked_regb_write(priv, MACON3,
-                                   MACON3_PADCFG0 | MACON3_TXCRCEN |
-                                   MACON3_FRMLNEN);
-               locked_regb_write(priv, MACON4, 1 << 6);        /* DEFER bit */
-               /* set inter-frame gap (non-back-to-back) */
-               locked_regw_write(priv, MAIPGL, 0x0C12);
-               /* set inter-frame gap (back-to-back) */
-               locked_regb_write(priv, MABBIPG, 0x12);
-       }
-       /*
-        * MACLCON1 (default)
-        * MACLCON2 (default)
-        * Set the maximum packet size which the controller will accept
-        */
-       locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
-
-       /* Configure LEDs */
-       if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
-               return 0;
-
-       if (priv->full_duplex) {
-               if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
-                       return 0;
-               if (!enc28j60_phy_write(priv, PHCON2, 0x00))
-                       return 0;
-       } else {
-               if (!enc28j60_phy_write(priv, PHCON1, 0x00))
-                       return 0;
-               if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
-                       return 0;
-       }
-       if (netif_msg_hw(priv))
-               enc28j60_dump_regs(priv, "Hw initialized.");
-
-       return 1;
-}
-
-static void enc28j60_hw_enable(struct enc28j60_net *priv)
-{
-       /* enable interrupts */
-       if (netif_msg_hw(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
-                       __func__);
-
-       enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
-
-       mutex_lock(&priv->lock);
-       nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
-                        EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
-       nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
-                         EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
-
-       /* enable receive logic */
-       nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
-       priv->hw_enable = true;
-       mutex_unlock(&priv->lock);
-}
-
-static void enc28j60_hw_disable(struct enc28j60_net *priv)
-{
-       mutex_lock(&priv->lock);
-       /* disable interrutps and packet reception */
-       nolock_regb_write(priv, EIE, 0x00);
-       nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
-       priv->hw_enable = false;
-       mutex_unlock(&priv->lock);
-}
-
-static int
-enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
-{
-       struct enc28j60_net *priv = netdev_priv(ndev);
-       int ret = 0;
-
-       if (!priv->hw_enable) {
-               /* link is in low power mode now; duplex setting
-                * will take effect on next enc28j60_hw_init().
-                */
-               if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
-                       priv->full_duplex = (duplex == DUPLEX_FULL);
-               else {
-                       if (netif_msg_link(priv))
-                               dev_warn(&ndev->dev,
-                                       "unsupported link setting\n");
-                       ret = -EOPNOTSUPP;
-               }
-       } else {
-               if (netif_msg_link(priv))
-                       dev_warn(&ndev->dev, "Warning: hw must be disabled "
-                               "to set link mode\n");
-               ret = -EBUSY;
-       }
-       return ret;
-}
-
-/*
- * Read the Transmit Status Vector
- */
-static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
-{
-       int endptr;
-
-       endptr = locked_regw_read(priv, ETXNDL);
-       if (netif_msg_hw(priv))
-               printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
-                        endptr + 1);
-       enc28j60_mem_read(priv, endptr + 1, TSV_SIZE, tsv);
-}
-
-static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
-                               u8 tsv[TSV_SIZE])
-{
-       u16 tmp1, tmp2;
-
-       printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
-       tmp1 = tsv[1];
-       tmp1 <<= 8;
-       tmp1 |= tsv[0];
-
-       tmp2 = tsv[5];
-       tmp2 <<= 8;
-       tmp2 |= tsv[4];
-
-       printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
-               " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
-       printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
-               " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
-               TSV_GETBIT(tsv, TSV_TXCRCERROR),
-               TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
-               TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
-       printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
-               "PacketDefer: %d, ExDefer: %d\n",
-               TSV_GETBIT(tsv, TSV_TXMULTICAST),
-               TSV_GETBIT(tsv, TSV_TXBROADCAST),
-               TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
-               TSV_GETBIT(tsv, TSV_TXEXDEFER));
-       printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
-                "Giant: %d, Underrun: %d\n",
-                TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
-                TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
-                TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
-       printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
-                "BackPressApp: %d, VLanTagFrame: %d\n",
-                TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
-                TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
-                TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
-                TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
-}
-
-/*
- * Receive Status vector
- */
-static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
-                             u16 pk_ptr, int len, u16 sts)
-{
-       printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
-               msg, pk_ptr);
-       printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
-                RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
-       printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
-                " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
-                RSV_GETBIT(sts, RSV_CRCERROR),
-                RSV_GETBIT(sts, RSV_LENCHECKERR),
-                RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
-       printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
-                "LongDropEvent: %d, CarrierEvent: %d\n",
-                RSV_GETBIT(sts, RSV_RXMULTICAST),
-                RSV_GETBIT(sts, RSV_RXBROADCAST),
-                RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
-                RSV_GETBIT(sts, RSV_CARRIEREV));
-       printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
-                " UnknownOp: %d, VLanTagFrame: %d\n",
-                RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
-                RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
-                RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
-                RSV_GETBIT(sts, RSV_RXTYPEVLAN));
-}
-
-static void dump_packet(const char *msg, int len, const char *data)
-{
-       printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
-       print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
-                       data, len, true);
-}
-
-/*
- * Hardware receive function.
- * Read the buffer memory, update the FIFO pointer to free the buffer,
- * check the status vector and decrement the packet counter.
- */
-static void enc28j60_hw_rx(struct net_device *ndev)
-{
-       struct enc28j60_net *priv = netdev_priv(ndev);
-       struct sk_buff *skb = NULL;
-       u16 erxrdpt, next_packet, rxstat;
-       u8 rsv[RSV_SIZE];
-       int len;
-
-       if (netif_msg_rx_status(priv))
-               printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
-                       priv->next_pk_ptr);
-
-       if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
-               if (netif_msg_rx_err(priv))
-                       dev_err(&ndev->dev,
-                               "%s() Invalid packet address!! 0x%04x\n",
-                               __func__, priv->next_pk_ptr);
-               /* packet address corrupted: reset RX logic */
-               mutex_lock(&priv->lock);
-               nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
-               nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
-               nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
-               nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
-               nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
-               nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
-               mutex_unlock(&priv->lock);
-               ndev->stats.rx_errors++;
-               return;
-       }
-       /* Read next packet pointer and rx status vector */
-       enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
-
-       next_packet = rsv[1];
-       next_packet <<= 8;
-       next_packet |= rsv[0];
-
-       len = rsv[3];
-       len <<= 8;
-       len |= rsv[2];
-
-       rxstat = rsv[5];
-       rxstat <<= 8;
-       rxstat |= rsv[4];
-
-       if (netif_msg_rx_status(priv))
-               enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
-
-       if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
-               if (netif_msg_rx_err(priv))
-                       dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
-               ndev->stats.rx_errors++;
-               if (RSV_GETBIT(rxstat, RSV_CRCERROR))
-                       ndev->stats.rx_crc_errors++;
-               if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
-                       ndev->stats.rx_frame_errors++;
-               if (len > MAX_FRAMELEN)
-                       ndev->stats.rx_over_errors++;
-       } else {
-               skb = dev_alloc_skb(len + NET_IP_ALIGN);
-               if (!skb) {
-                       if (netif_msg_rx_err(priv))
-                               dev_err(&ndev->dev,
-                                       "out of memory for Rx'd frame\n");
-                       ndev->stats.rx_dropped++;
-               } else {
-                       skb->dev = ndev;
-                       skb_reserve(skb, NET_IP_ALIGN);
-                       /* copy the packet from the receive buffer */
-                       enc28j60_mem_read(priv,
-                               rx_packet_start(priv->next_pk_ptr),
-                               len, skb_put(skb, len));
-                       if (netif_msg_pktdata(priv))
-                               dump_packet(__func__, skb->len, skb->data);
-                       skb->protocol = eth_type_trans(skb, ndev);
-                       /* update statistics */
-                       ndev->stats.rx_packets++;
-                       ndev->stats.rx_bytes += len;
-                       netif_rx_ni(skb);
-               }
-       }
-       /*
-        * Move the RX read pointer to the start of the next
-        * received packet.
-        * This frees the memory we just read out
-        */
-       erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
-       if (netif_msg_hw(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
-                       __func__, erxrdpt);
-
-       mutex_lock(&priv->lock);
-       nolock_regw_write(priv, ERXRDPTL, erxrdpt);
-#ifdef CONFIG_ENC28J60_WRITEVERIFY
-       if (netif_msg_drv(priv)) {
-               u16 reg;
-               reg = nolock_regw_read(priv, ERXRDPTL);
-               if (reg != erxrdpt)
-                       printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
-                               "error (0x%04x - 0x%04x)\n", __func__,
-                               reg, erxrdpt);
-       }
-#endif
-       priv->next_pk_ptr = next_packet;
-       /* we are done with this packet, decrement the packet counter */
-       nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
-       mutex_unlock(&priv->lock);
-}
-
-/*
- * Calculate free space in RxFIFO
- */
-static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
-{
-       int epkcnt, erxst, erxnd, erxwr, erxrd;
-       int free_space;
-
-       mutex_lock(&priv->lock);
-       epkcnt = nolock_regb_read(priv, EPKTCNT);
-       if (epkcnt >= 255)
-               free_space = -1;
-       else {
-               erxst = nolock_regw_read(priv, ERXSTL);
-               erxnd = nolock_regw_read(priv, ERXNDL);
-               erxwr = nolock_regw_read(priv, ERXWRPTL);
-               erxrd = nolock_regw_read(priv, ERXRDPTL);
-
-               if (erxwr > erxrd)
-                       free_space = (erxnd - erxst) - (erxwr - erxrd);
-               else if (erxwr == erxrd)
-                       free_space = (erxnd - erxst);
-               else
-                       free_space = erxrd - erxwr - 1;
-       }
-       mutex_unlock(&priv->lock);
-       if (netif_msg_rx_status(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
-                       __func__, free_space);
-       return free_space;
-}
-
-/*
- * Access the PHY to determine link status
- */
-static void enc28j60_check_link_status(struct net_device *ndev)
-{
-       struct enc28j60_net *priv = netdev_priv(ndev);
-       u16 reg;
-       int duplex;
-
-       reg = enc28j60_phy_read(priv, PHSTAT2);
-       if (netif_msg_hw(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
-                       "PHSTAT2: %04x\n", __func__,
-                       enc28j60_phy_read(priv, PHSTAT1), reg);
-       duplex = reg & PHSTAT2_DPXSTAT;
-
-       if (reg & PHSTAT2_LSTAT) {
-               netif_carrier_on(ndev);
-               if (netif_msg_ifup(priv))
-                       dev_info(&ndev->dev, "link up - %s\n",
-                               duplex ? "Full duplex" : "Half duplex");
-       } else {
-               if (netif_msg_ifdown(priv))
-                       dev_info(&ndev->dev, "link down\n");
-               netif_carrier_off(ndev);
-       }
-}
-
-static void enc28j60_tx_clear(struct net_device *ndev, bool err)
-{
-       struct enc28j60_net *priv = netdev_priv(ndev);
-
-       if (err)
-               ndev->stats.tx_errors++;
-       else
-               ndev->stats.tx_packets++;
-
-       if (priv->tx_skb) {
-               if (!err)
-                       ndev->stats.tx_bytes += priv->tx_skb->len;
-               dev_kfree_skb(priv->tx_skb);
-               priv->tx_skb = NULL;
-       }
-       locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
-       netif_wake_queue(ndev);
-}
-
-/*
- * RX handler
- * ignore PKTIF because is unreliable! (look at the errata datasheet)
- * check EPKTCNT is the suggested workaround.
- * We don't need to clear interrupt flag, automatically done when
- * enc28j60_hw_rx() decrements the packet counter.
- * Returns how many packet processed.
- */
-static int enc28j60_rx_interrupt(struct net_device *ndev)
-{
-       struct enc28j60_net *priv = netdev_priv(ndev);
-       int pk_counter, ret;
-
-       pk_counter = locked_regb_read(priv, EPKTCNT);
-       if (pk_counter && netif_msg_intr(priv))
-               printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
-       if (pk_counter > priv->max_pk_counter) {
-               /* update statistics */
-               priv->max_pk_counter = pk_counter;
-               if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
-                       printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
-                               priv->max_pk_counter);
-       }
-       ret = pk_counter;
-       while (pk_counter-- > 0)
-               enc28j60_hw_rx(ndev);
-
-       return ret;
-}
-
-static void enc28j60_irq_work_handler(struct work_struct *work)
-{
-       struct enc28j60_net *priv =
-               container_of(work, struct enc28j60_net, irq_work);
-       struct net_device *ndev = priv->netdev;
-       int intflags, loop;
-
-       if (netif_msg_intr(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-       /* disable further interrupts */
-       locked_reg_bfclr(priv, EIE, EIE_INTIE);
-
-       do {
-               loop = 0;
-               intflags = locked_regb_read(priv, EIR);
-               /* DMA interrupt handler (not currently used) */
-               if ((intflags & EIR_DMAIF) != 0) {
-                       loop++;
-                       if (netif_msg_intr(priv))
-                               printk(KERN_DEBUG DRV_NAME
-                                       ": intDMA(%d)\n", loop);
-                       locked_reg_bfclr(priv, EIR, EIR_DMAIF);
-               }
-               /* LINK changed handler */
-               if ((intflags & EIR_LINKIF) != 0) {
-                       loop++;
-                       if (netif_msg_intr(priv))
-                               printk(KERN_DEBUG DRV_NAME
-                                       ": intLINK(%d)\n", loop);
-                       enc28j60_check_link_status(ndev);
-                       /* read PHIR to clear the flag */
-                       enc28j60_phy_read(priv, PHIR);
-               }
-               /* TX complete handler */
-               if ((intflags & EIR_TXIF) != 0) {
-                       bool err = false;
-                       loop++;
-                       if (netif_msg_intr(priv))
-                               printk(KERN_DEBUG DRV_NAME
-                                       ": intTX(%d)\n", loop);
-                       priv->tx_retry_count = 0;
-                       if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
-                               if (netif_msg_tx_err(priv))
-                                       dev_err(&ndev->dev,
-                                               "Tx Error (aborted)\n");
-                               err = true;
-                       }
-                       if (netif_msg_tx_done(priv)) {
-                               u8 tsv[TSV_SIZE];
-                               enc28j60_read_tsv(priv, tsv);
-                               enc28j60_dump_tsv(priv, "Tx Done", tsv);
-                       }
-                       enc28j60_tx_clear(ndev, err);
-                       locked_reg_bfclr(priv, EIR, EIR_TXIF);
-               }
-               /* TX Error handler */
-               if ((intflags & EIR_TXERIF) != 0) {
-                       u8 tsv[TSV_SIZE];
-
-                       loop++;
-                       if (netif_msg_intr(priv))
-                               printk(KERN_DEBUG DRV_NAME
-                                       ": intTXErr(%d)\n", loop);
-                       locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
-                       enc28j60_read_tsv(priv, tsv);
-                       if (netif_msg_tx_err(priv))
-                               enc28j60_dump_tsv(priv, "Tx Error", tsv);
-                       /* Reset TX logic */
-                       mutex_lock(&priv->lock);
-                       nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
-                       nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
-                       nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
-                       mutex_unlock(&priv->lock);
-                       /* Transmit Late collision check for retransmit */
-                       if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
-                               if (netif_msg_tx_err(priv))
-                                       printk(KERN_DEBUG DRV_NAME
-                                               ": LateCollision TXErr (%d)\n",
-                                               priv->tx_retry_count);
-                               if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
-                                       locked_reg_bfset(priv, ECON1,
-                                                          ECON1_TXRTS);
-                               else
-                                       enc28j60_tx_clear(ndev, true);
-                       } else
-                               enc28j60_tx_clear(ndev, true);
-                       locked_reg_bfclr(priv, EIR, EIR_TXERIF);
-               }
-               /* RX Error handler */
-               if ((intflags & EIR_RXERIF) != 0) {
-                       loop++;
-                       if (netif_msg_intr(priv))
-                               printk(KERN_DEBUG DRV_NAME
-                                       ": intRXErr(%d)\n", loop);
-                       /* Check free FIFO space to flag RX overrun */
-                       if (enc28j60_get_free_rxfifo(priv) <= 0) {
-                               if (netif_msg_rx_err(priv))
-                                       printk(KERN_DEBUG DRV_NAME
-                                               ": RX Overrun\n");
-                               ndev->stats.rx_dropped++;
-                       }
-                       locked_reg_bfclr(priv, EIR, EIR_RXERIF);
-               }
-               /* RX handler */
-               if (enc28j60_rx_interrupt(ndev))
-                       loop++;
-       } while (loop);
-
-       /* re-enable interrupts */
-       locked_reg_bfset(priv, EIE, EIE_INTIE);
-       if (netif_msg_intr(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
-}
-
-/*
- * Hardware transmit function.
- * Fill the buffer memory and send the contents of the transmit buffer
- * onto the network
- */
-static void enc28j60_hw_tx(struct enc28j60_net *priv)
-{
-       if (netif_msg_tx_queued(priv))
-               printk(KERN_DEBUG DRV_NAME
-                       ": Tx Packet Len:%d\n", priv->tx_skb->len);
-
-       if (netif_msg_pktdata(priv))
-               dump_packet(__func__,
-                           priv->tx_skb->len, priv->tx_skb->data);
-       enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
-
-#ifdef CONFIG_ENC28J60_WRITEVERIFY
-       /* readback and verify written data */
-       if (netif_msg_drv(priv)) {
-               int test_len, k;
-               u8 test_buf[64]; /* limit the test to the first 64 bytes */
-               int okflag;
-
-               test_len = priv->tx_skb->len;
-               if (test_len > sizeof(test_buf))
-                       test_len = sizeof(test_buf);
-
-               /* + 1 to skip control byte */
-               enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
-               okflag = 1;
-               for (k = 0; k < test_len; k++) {
-                       if (priv->tx_skb->data[k] != test_buf[k]) {
-                               printk(KERN_DEBUG DRV_NAME
-                                        ": Error, %d location differ: "
-                                        "0x%02x-0x%02x\n", k,
-                                        priv->tx_skb->data[k], test_buf[k]);
-                               okflag = 0;
-                       }
-               }
-               if (!okflag)
-                       printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
-                               "verify ERROR!\n");
-       }
-#endif
-       /* set TX request flag */
-       locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
-}
-
-static netdev_tx_t enc28j60_send_packet(struct sk_buff *skb,
-                                       struct net_device *dev)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-
-       if (netif_msg_tx_queued(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
-       /* If some error occurs while trying to transmit this
-        * packet, you should return '1' from this function.
-        * In such a case you _may not_ do anything to the
-        * SKB, it is still owned by the network queueing
-        * layer when an error is returned.  This means you
-        * may not modify any SKB fields, you may not free
-        * the SKB, etc.
-        */
-       netif_stop_queue(dev);
-
-       /* Remember the skb for deferred processing */
-       priv->tx_skb = skb;
-       schedule_work(&priv->tx_work);
-
-       return NETDEV_TX_OK;
-}
-
-static void enc28j60_tx_work_handler(struct work_struct *work)
-{
-       struct enc28j60_net *priv =
-               container_of(work, struct enc28j60_net, tx_work);
-
-       /* actual delivery of data */
-       enc28j60_hw_tx(priv);
-}
-
-static irqreturn_t enc28j60_irq(int irq, void *dev_id)
-{
-       struct enc28j60_net *priv = dev_id;
-
-       /*
-        * Can't do anything in interrupt context because we need to
-        * block (spi_sync() is blocking) so fire of the interrupt
-        * handling workqueue.
-        * Remember that we access enc28j60 registers through SPI bus
-        * via spi_sync() call.
-        */
-       schedule_work(&priv->irq_work);
-
-       return IRQ_HANDLED;
-}
-
-static void enc28j60_tx_timeout(struct net_device *ndev)
-{
-       struct enc28j60_net *priv = netdev_priv(ndev);
-
-       if (netif_msg_timer(priv))
-               dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
-
-       ndev->stats.tx_errors++;
-       /* can't restart safely under softirq */
-       schedule_work(&priv->restart_work);
-}
-
-/*
- * Open/initialize the board. This is called (in the current kernel)
- * sometime after booting when the 'ifconfig' program is run.
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is non-reboot way to recover if something goes wrong.
- */
-static int enc28j60_net_open(struct net_device *dev)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-
-       if (netif_msg_drv(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
-       if (!is_valid_ether_addr(dev->dev_addr)) {
-               if (netif_msg_ifup(priv))
-                       dev_err(&dev->dev, "invalid MAC address %pM\n",
-                               dev->dev_addr);
-               return -EADDRNOTAVAIL;
-       }
-       /* Reset the hardware here (and take it out of low power mode) */
-       enc28j60_lowpower(priv, false);
-       enc28j60_hw_disable(priv);
-       if (!enc28j60_hw_init(priv)) {
-               if (netif_msg_ifup(priv))
-                       dev_err(&dev->dev, "hw_reset() failed\n");
-               return -EINVAL;
-       }
-       /* Update the MAC address (in case user has changed it) */
-       enc28j60_set_hw_macaddr(dev);
-       /* Enable interrupts */
-       enc28j60_hw_enable(priv);
-       /* check link status */
-       enc28j60_check_link_status(dev);
-       /* We are now ready to accept transmit requests from
-        * the queueing layer of the networking.
-        */
-       netif_start_queue(dev);
-
-       return 0;
-}
-
-/* The inverse routine to net_open(). */
-static int enc28j60_net_close(struct net_device *dev)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-
-       if (netif_msg_drv(priv))
-               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
-
-       enc28j60_hw_disable(priv);
-       enc28j60_lowpower(priv, true);
-       netif_stop_queue(dev);
-
-       return 0;
-}
-
-/*
- * Set or clear the multicast filter for this adapter
- * num_addrs == -1     Promiscuous mode, receive all packets
- * num_addrs == 0      Normal mode, filter out multicast packets
- * num_addrs > 0       Multicast mode, receive normal and MC packets
- */
-static void enc28j60_set_multicast_list(struct net_device *dev)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-       int oldfilter = priv->rxfilter;
-
-       if (dev->flags & IFF_PROMISC) {
-               if (netif_msg_link(priv))
-                       dev_info(&dev->dev, "promiscuous mode\n");
-               priv->rxfilter = RXFILTER_PROMISC;
-       } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
-               if (netif_msg_link(priv))
-                       dev_info(&dev->dev, "%smulticast mode\n",
-                               (dev->flags & IFF_ALLMULTI) ? "all-" : "");
-               priv->rxfilter = RXFILTER_MULTI;
-       } else {
-               if (netif_msg_link(priv))
-                       dev_info(&dev->dev, "normal mode\n");
-               priv->rxfilter = RXFILTER_NORMAL;
-       }
-
-       if (oldfilter != priv->rxfilter)
-               schedule_work(&priv->setrx_work);
-}
-
-static void enc28j60_setrx_work_handler(struct work_struct *work)
-{
-       struct enc28j60_net *priv =
-               container_of(work, struct enc28j60_net, setrx_work);
-
-       if (priv->rxfilter == RXFILTER_PROMISC) {
-               if (netif_msg_drv(priv))
-                       printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
-               locked_regb_write(priv, ERXFCON, 0x00);
-       } else if (priv->rxfilter == RXFILTER_MULTI) {
-               if (netif_msg_drv(priv))
-                       printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
-               locked_regb_write(priv, ERXFCON,
-                                       ERXFCON_UCEN | ERXFCON_CRCEN |
-                                       ERXFCON_BCEN | ERXFCON_MCEN);
-       } else {
-               if (netif_msg_drv(priv))
-                       printk(KERN_DEBUG DRV_NAME ": normal mode\n");
-               locked_regb_write(priv, ERXFCON,
-                                       ERXFCON_UCEN | ERXFCON_CRCEN |
-                                       ERXFCON_BCEN);
-       }
-}
-
-static void enc28j60_restart_work_handler(struct work_struct *work)
-{
-       struct enc28j60_net *priv =
-                       container_of(work, struct enc28j60_net, restart_work);
-       struct net_device *ndev = priv->netdev;
-       int ret;
-
-       rtnl_lock();
-       if (netif_running(ndev)) {
-               enc28j60_net_close(ndev);
-               ret = enc28j60_net_open(ndev);
-               if (unlikely(ret)) {
-                       dev_info(&ndev->dev, " could not restart %d\n", ret);
-                       dev_close(ndev);
-               }
-       }
-       rtnl_unlock();
-}
-
-/* ......................... ETHTOOL SUPPORT ........................... */
-
-static void
-enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-       strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
-       strlcpy(info->version, DRV_VERSION, sizeof(info->version));
-       strlcpy(info->bus_info,
-               dev_name(dev->dev.parent), sizeof(info->bus_info));
-}
-
-static int
-enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-
-       cmd->transceiver = XCVR_INTERNAL;
-       cmd->supported  = SUPPORTED_10baseT_Half
-                       | SUPPORTED_10baseT_Full
-                       | SUPPORTED_TP;
-       ethtool_cmd_speed_set(cmd,  SPEED_10);
-       cmd->duplex     = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-       cmd->port       = PORT_TP;
-       cmd->autoneg    = AUTONEG_DISABLE;
-
-       return 0;
-}
-
-static int
-enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-       return enc28j60_setlink(dev, cmd->autoneg,
-                               ethtool_cmd_speed(cmd), cmd->duplex);
-}
-
-static u32 enc28j60_get_msglevel(struct net_device *dev)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-       return priv->msg_enable;
-}
-
-static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-       priv->msg_enable = val;
-}
-
-static const struct ethtool_ops enc28j60_ethtool_ops = {
-       .get_settings   = enc28j60_get_settings,
-       .set_settings   = enc28j60_set_settings,
-       .get_drvinfo    = enc28j60_get_drvinfo,
-       .get_msglevel   = enc28j60_get_msglevel,
-       .set_msglevel   = enc28j60_set_msglevel,
-};
-
-static int enc28j60_chipset_init(struct net_device *dev)
-{
-       struct enc28j60_net *priv = netdev_priv(dev);
-
-       return enc28j60_hw_init(priv);
-}
-
-static const struct net_device_ops enc28j60_netdev_ops = {
-       .ndo_open               = enc28j60_net_open,
-       .ndo_stop               = enc28j60_net_close,
-       .ndo_start_xmit         = enc28j60_send_packet,
-       .ndo_set_multicast_list = enc28j60_set_multicast_list,
-       .ndo_set_mac_address    = enc28j60_set_mac_address,
-       .ndo_tx_timeout         = enc28j60_tx_timeout,
-       .ndo_change_mtu         = eth_change_mtu,
-       .ndo_validate_addr      = eth_validate_addr,
-};
-
-static int __devinit enc28j60_probe(struct spi_device *spi)
-{
-       struct net_device *dev;
-       struct enc28j60_net *priv;
-       int ret = 0;
-
-       if (netif_msg_drv(&debug))
-               dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
-                       DRV_VERSION);
-
-       dev = alloc_etherdev(sizeof(struct enc28j60_net));
-       if (!dev) {
-               if (netif_msg_drv(&debug))
-                       dev_err(&spi->dev, DRV_NAME
-                               ": unable to alloc new ethernet\n");
-               ret = -ENOMEM;
-               goto error_alloc;
-       }
-       priv = netdev_priv(dev);
-
-       priv->netdev = dev;     /* priv to netdev reference */
-       priv->spi = spi;        /* priv to spi reference */
-       priv->msg_enable = netif_msg_init(debug.msg_enable,
-                                               ENC28J60_MSG_DEFAULT);
-       mutex_init(&priv->lock);
-       INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
-       INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
-       INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
-       INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
-       dev_set_drvdata(&spi->dev, priv);       /* spi to priv reference */
-       SET_NETDEV_DEV(dev, &spi->dev);
-
-       if (!enc28j60_chipset_init(dev)) {
-               if (netif_msg_probe(priv))
-                       dev_info(&spi->dev, DRV_NAME " chip not found\n");
-               ret = -EIO;
-               goto error_irq;
-       }
-       random_ether_addr(dev->dev_addr);
-       enc28j60_set_hw_macaddr(dev);
-
-       /* Board setup must set the relevant edge trigger type;
-        * level triggers won't currently work.
-        */
-       ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
-       if (ret < 0) {
-               if (netif_msg_probe(priv))
-                       dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
-                               "(ret = %d)\n", spi->irq, ret);
-               goto error_irq;
-       }
-
-       dev->if_port = IF_PORT_10BASET;
-       dev->irq = spi->irq;
-       dev->netdev_ops = &enc28j60_netdev_ops;
-       dev->watchdog_timeo = TX_TIMEOUT;
-       SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
-
-       enc28j60_lowpower(priv, true);
-
-       ret = register_netdev(dev);
-       if (ret) {
-               if (netif_msg_probe(priv))
-                       dev_err(&spi->dev, "register netdev " DRV_NAME
-                               " failed (ret = %d)\n", ret);
-               goto error_register;
-       }
-       dev_info(&dev->dev, DRV_NAME " driver registered\n");
-
-       return 0;
-
-error_register:
-       free_irq(spi->irq, priv);
-error_irq:
-       free_netdev(dev);
-error_alloc:
-       return ret;
-}
-
-static int __devexit enc28j60_remove(struct spi_device *spi)
-{
-       struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
-
-       if (netif_msg_drv(priv))
-               printk(KERN_DEBUG DRV_NAME ": remove\n");
-
-       unregister_netdev(priv->netdev);
-       free_irq(spi->irq, priv);
-       free_netdev(priv->netdev);
-
-       return 0;
-}
-
-static struct spi_driver enc28j60_driver = {
-       .driver = {
-                  .name = DRV_NAME,
-                  .owner = THIS_MODULE,
-        },
-       .probe = enc28j60_probe,
-       .remove = __devexit_p(enc28j60_remove),
-};
-
-static int __init enc28j60_init(void)
-{
-       msec20_to_jiffies = msecs_to_jiffies(20);
-
-       return spi_register_driver(&enc28j60_driver);
-}
-
-module_init(enc28j60_init);
-
-static void __exit enc28j60_exit(void)
-{
-       spi_unregister_driver(&enc28j60_driver);
-}
-
-module_exit(enc28j60_exit);
-
-MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
-MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
-MODULE_LICENSE("GPL");
-module_param_named(debug, debug.msg_enable, int, 0);
-MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
-MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/net/enc28j60_hw.h b/drivers/net/enc28j60_hw.h
deleted file mode 100644 (file)
index 25b41de..0000000
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * enc28j60_hw.h: EDTP FrameThrower style enc28j60 registers
- *
- * $Id: enc28j60_hw.h,v 1.9 2007/12/14 11:59:16 claudio Exp $
- */
-
-#ifndef _ENC28J60_HW_H
-#define _ENC28J60_HW_H
-
-/*
- * ENC28J60 Control Registers
- * Control register definitions are a combination of address,
- * bank number, and Ethernet/MAC/PHY indicator bits.
- * - Register address  (bits 0-4)
- * - Bank number       (bits 5-6)
- * - MAC/MII indicator (bit 7)
- */
-#define ADDR_MASK      0x1F
-#define BANK_MASK      0x60
-#define SPRD_MASK      0x80
-/* All-bank registers */
-#define EIE            0x1B
-#define EIR            0x1C
-#define ESTAT          0x1D
-#define ECON2          0x1E
-#define ECON1          0x1F
-/* Bank 0 registers */
-#define ERDPTL         (0x00|0x00)
-#define ERDPTH         (0x01|0x00)
-#define EWRPTL         (0x02|0x00)
-#define EWRPTH         (0x03|0x00)
-#define ETXSTL         (0x04|0x00)
-#define ETXSTH         (0x05|0x00)
-#define ETXNDL         (0x06|0x00)
-#define ETXNDH         (0x07|0x00)
-#define ERXSTL         (0x08|0x00)
-#define ERXSTH         (0x09|0x00)
-#define ERXNDL         (0x0A|0x00)
-#define ERXNDH         (0x0B|0x00)
-#define ERXRDPTL       (0x0C|0x00)
-#define ERXRDPTH       (0x0D|0x00)
-#define ERXWRPTL       (0x0E|0x00)
-#define ERXWRPTH       (0x0F|0x00)
-#define EDMASTL                (0x10|0x00)
-#define EDMASTH                (0x11|0x00)
-#define EDMANDL                (0x12|0x00)
-#define EDMANDH                (0x13|0x00)
-#define EDMADSTL       (0x14|0x00)
-#define EDMADSTH       (0x15|0x00)
-#define EDMACSL                (0x16|0x00)
-#define EDMACSH                (0x17|0x00)
-/* Bank 1 registers */
-#define EHT0           (0x00|0x20)
-#define EHT1           (0x01|0x20)
-#define EHT2           (0x02|0x20)
-#define EHT3           (0x03|0x20)
-#define EHT4           (0x04|0x20)
-#define EHT5           (0x05|0x20)
-#define EHT6           (0x06|0x20)
-#define EHT7           (0x07|0x20)
-#define EPMM0          (0x08|0x20)
-#define EPMM1          (0x09|0x20)
-#define EPMM2          (0x0A|0x20)
-#define EPMM3          (0x0B|0x20)
-#define EPMM4          (0x0C|0x20)
-#define EPMM5          (0x0D|0x20)
-#define EPMM6          (0x0E|0x20)
-#define EPMM7          (0x0F|0x20)
-#define EPMCSL         (0x10|0x20)
-#define EPMCSH         (0x11|0x20)
-#define EPMOL          (0x14|0x20)
-#define EPMOH          (0x15|0x20)
-#define EWOLIE         (0x16|0x20)
-#define EWOLIR         (0x17|0x20)
-#define ERXFCON                (0x18|0x20)
-#define EPKTCNT                (0x19|0x20)
-/* Bank 2 registers */
-#define MACON1         (0x00|0x40|SPRD_MASK)
-/* #define MACON2      (0x01|0x40|SPRD_MASK) */
-#define MACON3         (0x02|0x40|SPRD_MASK)
-#define MACON4         (0x03|0x40|SPRD_MASK)
-#define MABBIPG                (0x04|0x40|SPRD_MASK)
-#define MAIPGL         (0x06|0x40|SPRD_MASK)
-#define MAIPGH         (0x07|0x40|SPRD_MASK)
-#define MACLCON1       (0x08|0x40|SPRD_MASK)
-#define MACLCON2       (0x09|0x40|SPRD_MASK)
-#define MAMXFLL                (0x0A|0x40|SPRD_MASK)
-#define MAMXFLH                (0x0B|0x40|SPRD_MASK)
-#define MAPHSUP                (0x0D|0x40|SPRD_MASK)
-#define MICON          (0x11|0x40|SPRD_MASK)
-#define MICMD          (0x12|0x40|SPRD_MASK)
-#define MIREGADR       (0x14|0x40|SPRD_MASK)
-#define MIWRL          (0x16|0x40|SPRD_MASK)
-#define MIWRH          (0x17|0x40|SPRD_MASK)
-#define MIRDL          (0x18|0x40|SPRD_MASK)
-#define MIRDH          (0x19|0x40|SPRD_MASK)
-/* Bank 3 registers */
-#define MAADR1         (0x00|0x60|SPRD_MASK)
-#define MAADR0         (0x01|0x60|SPRD_MASK)
-#define MAADR3         (0x02|0x60|SPRD_MASK)
-#define MAADR2         (0x03|0x60|SPRD_MASK)
-#define MAADR5         (0x04|0x60|SPRD_MASK)
-#define MAADR4         (0x05|0x60|SPRD_MASK)
-#define EBSTSD         (0x06|0x60)
-#define EBSTCON                (0x07|0x60)
-#define EBSTCSL                (0x08|0x60)
-#define EBSTCSH                (0x09|0x60)
-#define MISTAT         (0x0A|0x60|SPRD_MASK)
-#define EREVID         (0x12|0x60)
-#define ECOCON         (0x15|0x60)
-#define EFLOCON                (0x17|0x60)
-#define EPAUSL         (0x18|0x60)
-#define EPAUSH         (0x19|0x60)
-/* PHY registers */
-#define PHCON1         0x00
-#define PHSTAT1                0x01
-#define PHHID1         0x02
-#define PHHID2         0x03
-#define PHCON2         0x10
-#define PHSTAT2                0x11
-#define PHIE           0x12
-#define PHIR           0x13
-#define PHLCON         0x14
-
-/* ENC28J60 EIE Register Bit Definitions */
-#define EIE_INTIE      0x80
-#define EIE_PKTIE      0x40
-#define EIE_DMAIE      0x20
-#define EIE_LINKIE     0x10
-#define EIE_TXIE       0x08
-/* #define EIE_WOLIE   0x04 (reserved) */
-#define EIE_TXERIE     0x02
-#define EIE_RXERIE     0x01
-/* ENC28J60 EIR Register Bit Definitions */
-#define EIR_PKTIF      0x40
-#define EIR_DMAIF      0x20
-#define EIR_LINKIF     0x10
-#define EIR_TXIF       0x08
-/* #define EIR_WOLIF   0x04 (reserved) */
-#define EIR_TXERIF     0x02
-#define EIR_RXERIF     0x01
-/* ENC28J60 ESTAT Register Bit Definitions */
-#define ESTAT_INT      0x80
-#define ESTAT_LATECOL  0x10
-#define ESTAT_RXBUSY   0x04
-#define ESTAT_TXABRT   0x02
-#define ESTAT_CLKRDY   0x01
-/* ENC28J60 ECON2 Register Bit Definitions */
-#define ECON2_AUTOINC  0x80
-#define ECON2_PKTDEC   0x40
-#define ECON2_PWRSV    0x20
-#define ECON2_VRPS     0x08
-/* ENC28J60 ECON1 Register Bit Definitions */
-#define ECON1_TXRST    0x80
-#define ECON1_RXRST    0x40
-#define ECON1_DMAST    0x20
-#define ECON1_CSUMEN   0x10
-#define ECON1_TXRTS    0x08
-#define ECON1_RXEN     0x04
-#define ECON1_BSEL1    0x02
-#define ECON1_BSEL0    0x01
-/* ENC28J60 MACON1 Register Bit Definitions */
-#define MACON1_LOOPBK  0x10
-#define MACON1_TXPAUS  0x08
-#define MACON1_RXPAUS  0x04
-#define MACON1_PASSALL 0x02
-#define MACON1_MARXEN  0x01
-/* ENC28J60 MACON2 Register Bit Definitions */
-#define MACON2_MARST   0x80
-#define MACON2_RNDRST  0x40
-#define MACON2_MARXRST 0x08
-#define MACON2_RFUNRST 0x04
-#define MACON2_MATXRST 0x02
-#define MACON2_TFUNRST 0x01
-/* ENC28J60 MACON3 Register Bit Definitions */
-#define MACON3_PADCFG2 0x80
-#define MACON3_PADCFG1 0x40
-#define MACON3_PADCFG0 0x20
-#define MACON3_TXCRCEN 0x10
-#define MACON3_PHDRLEN 0x08
-#define MACON3_HFRMLEN 0x04
-#define MACON3_FRMLNEN 0x02
-#define MACON3_FULDPX  0x01
-/* ENC28J60 MICMD Register Bit Definitions */
-#define MICMD_MIISCAN  0x02
-#define MICMD_MIIRD    0x01
-/* ENC28J60 MISTAT Register Bit Definitions */
-#define MISTAT_NVALID  0x04
-#define MISTAT_SCAN    0x02
-#define MISTAT_BUSY    0x01
-/* ENC28J60 ERXFCON Register Bit Definitions */
-#define ERXFCON_UCEN   0x80
-#define ERXFCON_ANDOR  0x40
-#define ERXFCON_CRCEN  0x20
-#define ERXFCON_PMEN   0x10
-#define ERXFCON_MPEN   0x08
-#define ERXFCON_HTEN   0x04
-#define ERXFCON_MCEN   0x02
-#define ERXFCON_BCEN   0x01
-
-/* ENC28J60 PHY PHCON1 Register Bit Definitions */
-#define PHCON1_PRST    0x8000
-#define PHCON1_PLOOPBK 0x4000
-#define PHCON1_PPWRSV  0x0800
-#define PHCON1_PDPXMD  0x0100
-/* ENC28J60 PHY PHSTAT1 Register Bit Definitions */
-#define PHSTAT1_PFDPX  0x1000
-#define PHSTAT1_PHDPX  0x0800
-#define PHSTAT1_LLSTAT 0x0004
-#define PHSTAT1_JBSTAT 0x0002
-/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */
-#define PHSTAT2_TXSTAT (1 << 13)
-#define PHSTAT2_RXSTAT (1 << 12)
-#define PHSTAT2_COLSTAT        (1 << 11)
-#define PHSTAT2_LSTAT  (1 << 10)
-#define PHSTAT2_DPXSTAT        (1 << 9)
-#define PHSTAT2_PLRITY (1 << 5)
-/* ENC28J60 PHY PHCON2 Register Bit Definitions */
-#define PHCON2_FRCLINK 0x4000
-#define PHCON2_TXDIS   0x2000
-#define PHCON2_JABBER  0x0400
-#define PHCON2_HDLDIS  0x0100
-/* ENC28J60 PHY PHIE Register Bit Definitions */
-#define PHIE_PLNKIE    (1 << 4)
-#define PHIE_PGEIE     (1 << 1)
-/* ENC28J60 PHY PHIR Register Bit Definitions */
-#define PHIR_PLNKIF    (1 << 4)
-#define PHIR_PGEIF     (1 << 1)
-
-/* ENC28J60 Packet Control Byte Bit Definitions */
-#define PKTCTRL_PHUGEEN                0x08
-#define PKTCTRL_PPADEN         0x04
-#define PKTCTRL_PCRCEN         0x02
-#define PKTCTRL_POVERRIDE      0x01
-
-/* ENC28J60 Transmit Status Vector */
-#define TSV_TXBYTECNT          0
-#define TSV_TXCOLLISIONCNT     16
-#define TSV_TXCRCERROR         20
-#define TSV_TXLENCHKERROR      21
-#define TSV_TXLENOUTOFRANGE    22
-#define TSV_TXDONE             23
-#define TSV_TXMULTICAST                24
-#define TSV_TXBROADCAST                25
-#define TSV_TXPACKETDEFER      26
-#define TSV_TXEXDEFER          27
-#define TSV_TXEXCOLLISION      28
-#define TSV_TXLATECOLLISION    29
-#define TSV_TXGIANT            30
-#define TSV_TXUNDERRUN         31
-#define TSV_TOTBYTETXONWIRE    32
-#define TSV_TXCONTROLFRAME     48
-#define TSV_TXPAUSEFRAME       49
-#define TSV_BACKPRESSUREAPP    50
-#define TSV_TXVLANTAGFRAME     51
-
-#define TSV_SIZE               7
-#define TSV_BYTEOF(x)          ((x) / 8)
-#define TSV_BITMASK(x)         (1 << ((x) % 8))
-#define TSV_GETBIT(x, y)       (((x)[TSV_BYTEOF(y)] & TSV_BITMASK(y)) ? 1 : 0)
-
-/* ENC28J60 Receive Status Vector */
-#define RSV_RXLONGEVDROPEV     16
-#define RSV_CARRIEREV          18
-#define RSV_CRCERROR           20
-#define RSV_LENCHECKERR                21
-#define RSV_LENOUTOFRANGE      22
-#define RSV_RXOK               23
-#define RSV_RXMULTICAST                24
-#define RSV_RXBROADCAST                25
-#define RSV_DRIBBLENIBBLE      26
-#define RSV_RXCONTROLFRAME     27
-#define RSV_RXPAUSEFRAME       28
-#define RSV_RXUNKNOWNOPCODE    29
-#define RSV_RXTYPEVLAN         30
-
-#define RSV_SIZE               6
-#define RSV_BITMASK(x)         (1 << ((x) - 16))
-#define RSV_GETBIT(x, y)       (((x) & RSV_BITMASK(y)) ? 1 : 0)
-
-
-/* SPI operation codes */
-#define ENC28J60_READ_CTRL_REG 0x00
-#define ENC28J60_READ_BUF_MEM  0x3A
-#define ENC28J60_WRITE_CTRL_REG 0x40
-#define ENC28J60_WRITE_BUF_MEM 0x7A
-#define ENC28J60_BIT_FIELD_SET 0x80
-#define ENC28J60_BIT_FIELD_CLR 0xA0
-#define ENC28J60_SOFT_RESET    0xFF
-
-
-/* buffer boundaries applied to internal 8K ram
- * entire available packet buffer space is allocated.
- * Give TX buffer space for one full ethernet frame (~1500 bytes)
- * receive buffer gets the rest */
-#define TXSTART_INIT           0x1A00
-#define TXEND_INIT             0x1FFF
-
-/* Put RX buffer at 0 as suggested by the Errata datasheet */
-#define RXSTART_INIT           0x0000
-#define RXEND_INIT             0x19FF
-
-/* maximum ethernet frame length */
-#define MAX_FRAMELEN           1518
-
-/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */
-#define ENC28J60_LAMPS_MODE    0x3476
-
-#endif
index 32561c71040d7a1868a9ecab246b094718e3f225..0cec25cbf36b0962da4c39cb491e701b7f844155 100644 (file)
@@ -78,6 +78,7 @@ config LANTIQ_ETOP
 source "drivers/net/ethernet/marvell/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/micrel/Kconfig"
+source "drivers/net/ethernet/microchip/Kconfig"
 
 config MIPS_SIM_NET
        tristate "MIPS simulator Network device"
index 94f1be8e822bdfb9b6253263b7aab17e89a79660..ebe8aee3f839ee78bccb074d1a6c266b083270d1 100644 (file)
@@ -36,6 +36,7 @@ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
 obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+obj-$(CONFIG_NET_VENDOR_MICROCHIP) += microchip/
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
 obj-$(CONFIG_FEALNX) += fealnx.o
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
new file mode 100644 (file)
index 0000000..53b0b04
--- /dev/null
@@ -0,0 +1,37 @@
+#
+# Microchip network device configuration
+#
+
+config NET_VENDOR_MICROCHIP
+       bool "Microchip devices"
+       depends on SPI && EXPERIMENTAL
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y
+         and read the Ethernet-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>.
+
+         Note that the answer to this question doesn't directly affect the
+         kernel: saying N will just cause the configurator to skip all
+         the questions about Microchip cards. If you say Y, you will be asked
+         for your specific card in the following questions.
+
+if NET_VENDOR_MICROCHIP
+
+config ENC28J60
+       tristate "ENC28J60 support"
+       depends on SPI && EXPERIMENTAL
+       select CRC32
+       ---help---
+         Support for the Microchip EN28J60 ethernet chip.
+
+         To compile this driver as a module, choose M here. The module will be
+         called enc28j60.
+
+config ENC28J60_WRITEVERIFY
+       bool "Enable write verify"
+       depends on ENC28J60
+       ---help---
+         Enable the verify after the buffer write useful for debugging purpose.
+         If unsure, say N.
+
+endif # NET_VENDOR_MICROCHIP
diff --git a/drivers/net/ethernet/microchip/Makefile b/drivers/net/ethernet/microchip/Makefile
new file mode 100644 (file)
index 0000000..573d429
--- /dev/null
@@ -0,0 +1,5 @@
+#
+# Makefile for the Microchip network device drivers.
+#
+
+obj-$(CONFIG_ENC28J60) += enc28j60.o
diff --git a/drivers/net/ethernet/microchip/enc28j60.c b/drivers/net/ethernet/microchip/enc28j60.c
new file mode 100644 (file)
index 0000000..2837ce2
--- /dev/null
@@ -0,0 +1,1667 @@
+/*
+ * Microchip ENC28J60 ethernet driver (MAC + PHY)
+ *
+ * Copyright (C) 2007 Eurek srl
+ * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
+ * based on enc28j60.c written by David Anders for 2.4 kernel version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+
+#include "enc28j60_hw.h"
+
+#define DRV_NAME       "enc28j60"
+#define DRV_VERSION    "1.01"
+
+#define SPI_OPLEN      1
+
+#define ENC28J60_MSG_DEFAULT   \
+       (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
+
+/* Buffer size required for the largest SPI transfer (i.e., reading a
+ * frame). */
+#define SPI_TRANSFER_BUF_LEN   (4 + MAX_FRAMELEN)
+
+#define TX_TIMEOUT     (4 * HZ)
+
+/* Max TX retries in case of collision as suggested by errata datasheet */
+#define MAX_TX_RETRYCOUNT      16
+
+enum {
+       RXFILTER_NORMAL,
+       RXFILTER_MULTI,
+       RXFILTER_PROMISC
+};
+
+/* Driver local data */
+struct enc28j60_net {
+       struct net_device *netdev;
+       struct spi_device *spi;
+       struct mutex lock;
+       struct sk_buff *tx_skb;
+       struct work_struct tx_work;
+       struct work_struct irq_work;
+       struct work_struct setrx_work;
+       struct work_struct restart_work;
+       u8 bank;                /* current register bank selected */
+       u16 next_pk_ptr;        /* next packet pointer within FIFO */
+       u16 max_pk_counter;     /* statistics: max packet counter */
+       u16 tx_retry_count;
+       bool hw_enable;
+       bool full_duplex;
+       int rxfilter;
+       u32 msg_enable;
+       u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
+};
+
+/* use ethtool to change the level for any given device */
+static struct {
+       u32 msg_enable;
+} debug = { -1 };
+
+/*
+ * SPI read buffer
+ * wait for the SPI transfer and copy received data to destination
+ */
+static int
+spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
+{
+       u8 *rx_buf = priv->spi_transfer_buf + 4;
+       u8 *tx_buf = priv->spi_transfer_buf;
+       struct spi_transfer t = {
+               .tx_buf = tx_buf,
+               .rx_buf = rx_buf,
+               .len = SPI_OPLEN + len,
+       };
+       struct spi_message msg;
+       int ret;
+
+       tx_buf[0] = ENC28J60_READ_BUF_MEM;
+       tx_buf[1] = tx_buf[2] = tx_buf[3] = 0;  /* don't care */
+
+       spi_message_init(&msg);
+       spi_message_add_tail(&t, &msg);
+       ret = spi_sync(priv->spi, &msg);
+       if (ret == 0) {
+               memcpy(data, &rx_buf[SPI_OPLEN], len);
+               ret = msg.status;
+       }
+       if (ret && netif_msg_drv(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+                       __func__, ret);
+
+       return ret;
+}
+
+/*
+ * SPI write buffer
+ */
+static int spi_write_buf(struct enc28j60_net *priv, int len,
+                        const u8 *data)
+{
+       int ret;
+
+       if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
+               ret = -EINVAL;
+       else {
+               priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
+               memcpy(&priv->spi_transfer_buf[1], data, len);
+               ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
+               if (ret && netif_msg_drv(priv))
+                       printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+                               __func__, ret);
+       }
+       return ret;
+}
+
+/*
+ * basic SPI read operation
+ */
+static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
+                          u8 addr)
+{
+       u8 tx_buf[2];
+       u8 rx_buf[4];
+       u8 val = 0;
+       int ret;
+       int slen = SPI_OPLEN;
+
+       /* do dummy read if needed */
+       if (addr & SPRD_MASK)
+               slen++;
+
+       tx_buf[0] = op | (addr & ADDR_MASK);
+       ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
+       if (ret)
+               printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+                       __func__, ret);
+       else
+               val = rx_buf[slen - 1];
+
+       return val;
+}
+
+/*
+ * basic SPI write operation
+ */
+static int spi_write_op(struct enc28j60_net *priv, u8 op,
+                       u8 addr, u8 val)
+{
+       int ret;
+
+       priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
+       priv->spi_transfer_buf[1] = val;
+       ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
+       if (ret && netif_msg_drv(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
+                       __func__, ret);
+       return ret;
+}
+
+static void enc28j60_soft_reset(struct enc28j60_net *priv)
+{
+       if (netif_msg_hw(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+       spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
+       /* Errata workaround #1, CLKRDY check is unreliable,
+        * delay at least 1 mS instead */
+       udelay(2000);
+}
+
+/*
+ * select the current register bank if necessary
+ */
+static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
+{
+       u8 b = (addr & BANK_MASK) >> 5;
+
+       /* These registers (EIE, EIR, ESTAT, ECON2, ECON1)
+        * are present in all banks, no need to switch bank
+        */
+       if (addr >= EIE && addr <= ECON1)
+               return;
+
+       /* Clear or set each bank selection bit as needed */
+       if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) {
+               if (b & ECON1_BSEL0)
+                       spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
+                                       ECON1_BSEL0);
+               else
+                       spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
+                                       ECON1_BSEL0);
+       }
+       if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) {
+               if (b & ECON1_BSEL1)
+                       spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
+                                       ECON1_BSEL1);
+               else
+                       spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
+                                       ECON1_BSEL1);
+       }
+       priv->bank = b;
+}
+
+/*
+ * Register access routines through the SPI bus.
+ * Every register access comes in two flavours:
+ * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
+ *   atomically more than one register
+ * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
+ *
+ * Some registers can be accessed through the bit field clear and
+ * bit field set to avoid a read modify write cycle.
+ */
+
+/*
+ * Register bit field Set
+ */
+static void nolock_reg_bfset(struct enc28j60_net *priv,
+                                     u8 addr, u8 mask)
+{
+       enc28j60_set_bank(priv, addr);
+       spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
+}
+
+static void locked_reg_bfset(struct enc28j60_net *priv,
+                                     u8 addr, u8 mask)
+{
+       mutex_lock(&priv->lock);
+       nolock_reg_bfset(priv, addr, mask);
+       mutex_unlock(&priv->lock);
+}
+
+/*
+ * Register bit field Clear
+ */
+static void nolock_reg_bfclr(struct enc28j60_net *priv,
+                                     u8 addr, u8 mask)
+{
+       enc28j60_set_bank(priv, addr);
+       spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
+}
+
+static void locked_reg_bfclr(struct enc28j60_net *priv,
+                                     u8 addr, u8 mask)
+{
+       mutex_lock(&priv->lock);
+       nolock_reg_bfclr(priv, addr, mask);
+       mutex_unlock(&priv->lock);
+}
+
+/*
+ * Register byte read
+ */
+static int nolock_regb_read(struct enc28j60_net *priv,
+                                    u8 address)
+{
+       enc28j60_set_bank(priv, address);
+       return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
+}
+
+static int locked_regb_read(struct enc28j60_net *priv,
+                                    u8 address)
+{
+       int ret;
+
+       mutex_lock(&priv->lock);
+       ret = nolock_regb_read(priv, address);
+       mutex_unlock(&priv->lock);
+
+       return ret;
+}
+
+/*
+ * Register word read
+ */
+static int nolock_regw_read(struct enc28j60_net *priv,
+                                    u8 address)
+{
+       int rl, rh;
+
+       enc28j60_set_bank(priv, address);
+       rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
+       rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
+
+       return (rh << 8) | rl;
+}
+
+static int locked_regw_read(struct enc28j60_net *priv,
+                                    u8 address)
+{
+       int ret;
+
+       mutex_lock(&priv->lock);
+       ret = nolock_regw_read(priv, address);
+       mutex_unlock(&priv->lock);
+
+       return ret;
+}
+
+/*
+ * Register byte write
+ */
+static void nolock_regb_write(struct enc28j60_net *priv,
+                                      u8 address, u8 data)
+{
+       enc28j60_set_bank(priv, address);
+       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
+}
+
+static void locked_regb_write(struct enc28j60_net *priv,
+                                      u8 address, u8 data)
+{
+       mutex_lock(&priv->lock);
+       nolock_regb_write(priv, address, data);
+       mutex_unlock(&priv->lock);
+}
+
+/*
+ * Register word write
+ */
+static void nolock_regw_write(struct enc28j60_net *priv,
+                                      u8 address, u16 data)
+{
+       enc28j60_set_bank(priv, address);
+       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
+       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
+                    (u8) (data >> 8));
+}
+
+static void locked_regw_write(struct enc28j60_net *priv,
+                                      u8 address, u16 data)
+{
+       mutex_lock(&priv->lock);
+       nolock_regw_write(priv, address, data);
+       mutex_unlock(&priv->lock);
+}
+
+/*
+ * Buffer memory read
+ * Select the starting address and execute a SPI buffer read
+ */
+static void enc28j60_mem_read(struct enc28j60_net *priv,
+                                    u16 addr, int len, u8 *data)
+{
+       mutex_lock(&priv->lock);
+       nolock_regw_write(priv, ERDPTL, addr);
+#ifdef CONFIG_ENC28J60_WRITEVERIFY
+       if (netif_msg_drv(priv)) {
+               u16 reg;
+               reg = nolock_regw_read(priv, ERDPTL);
+               if (reg != addr)
+                       printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
+                               "(0x%04x - 0x%04x)\n", __func__, reg, addr);
+       }
+#endif
+       spi_read_buf(priv, len, data);
+       mutex_unlock(&priv->lock);
+}
+
+/*
+ * Write packet to enc28j60 TX buffer memory
+ */
+static void
+enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
+{
+       mutex_lock(&priv->lock);
+       /* Set the write pointer to start of transmit buffer area */
+       nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
+#ifdef CONFIG_ENC28J60_WRITEVERIFY
+       if (netif_msg_drv(priv)) {
+               u16 reg;
+               reg = nolock_regw_read(priv, EWRPTL);
+               if (reg != TXSTART_INIT)
+                       printk(KERN_DEBUG DRV_NAME
+                               ": %s() ERWPT:0x%04x != 0x%04x\n",
+                               __func__, reg, TXSTART_INIT);
+       }
+#endif
+       /* Set the TXND pointer to correspond to the packet size given */
+       nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
+       /* write per-packet control byte */
+       spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
+       if (netif_msg_hw(priv))
+               printk(KERN_DEBUG DRV_NAME
+                       ": %s() after control byte ERWPT:0x%04x\n",
+                       __func__, nolock_regw_read(priv, EWRPTL));
+       /* copy the packet into the transmit buffer */
+       spi_write_buf(priv, len, data);
+       if (netif_msg_hw(priv))
+               printk(KERN_DEBUG DRV_NAME
+                        ": %s() after write packet ERWPT:0x%04x, len=%d\n",
+                        __func__, nolock_regw_read(priv, EWRPTL), len);
+       mutex_unlock(&priv->lock);
+}
+
+static unsigned long msec20_to_jiffies;
+
+static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
+{
+       unsigned long timeout = jiffies + msec20_to_jiffies;
+
+       /* 20 msec timeout read */
+       while ((nolock_regb_read(priv, reg) & mask) != val) {
+               if (time_after(jiffies, timeout)) {
+                       if (netif_msg_drv(priv))
+                               dev_dbg(&priv->spi->dev,
+                                       "reg %02x ready timeout!\n", reg);
+                       return -ETIMEDOUT;
+               }
+               cpu_relax();
+       }
+       return 0;
+}
+
+/*
+ * Wait until the PHY operation is complete.
+ */
+static int wait_phy_ready(struct enc28j60_net *priv)
+{
+       return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
+}
+
+/*
+ * PHY register read
+ * PHY registers are not accessed directly, but through the MII
+ */
+static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
+{
+       u16 ret;
+
+       mutex_lock(&priv->lock);
+       /* set the PHY register address */
+       nolock_regb_write(priv, MIREGADR, address);
+       /* start the register read operation */
+       nolock_regb_write(priv, MICMD, MICMD_MIIRD);
+       /* wait until the PHY read completes */
+       wait_phy_ready(priv);
+       /* quit reading */
+       nolock_regb_write(priv, MICMD, 0x00);
+       /* return the data */
+       ret  = nolock_regw_read(priv, MIRDL);
+       mutex_unlock(&priv->lock);
+
+       return ret;
+}
+
+static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
+{
+       int ret;
+
+       mutex_lock(&priv->lock);
+       /* set the PHY register address */
+       nolock_regb_write(priv, MIREGADR, address);
+       /* write the PHY data */
+       nolock_regw_write(priv, MIWRL, data);
+       /* wait until the PHY write completes and return */
+       ret = wait_phy_ready(priv);
+       mutex_unlock(&priv->lock);
+
+       return ret;
+}
+
+/*
+ * Program the hardware MAC address from dev->dev_addr.
+ */
+static int enc28j60_set_hw_macaddr(struct net_device *ndev)
+{
+       int ret;
+       struct enc28j60_net *priv = netdev_priv(ndev);
+
+       mutex_lock(&priv->lock);
+       if (!priv->hw_enable) {
+               if (netif_msg_drv(priv))
+                       printk(KERN_INFO DRV_NAME
+                               ": %s: Setting MAC address to %pM\n",
+                               ndev->name, ndev->dev_addr);
+               /* NOTE: MAC address in ENC28J60 is byte-backward */
+               nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
+               nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
+               nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
+               nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
+               nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
+               nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
+               ret = 0;
+       } else {
+               if (netif_msg_drv(priv))
+                       printk(KERN_DEBUG DRV_NAME
+                               ": %s() Hardware must be disabled to set "
+                               "Mac address\n", __func__);
+               ret = -EBUSY;
+       }
+       mutex_unlock(&priv->lock);
+       return ret;
+}
+
+/*
+ * Store the new hardware address in dev->dev_addr, and update the MAC.
+ */
+static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
+{
+       struct sockaddr *address = addr;
+
+       if (netif_running(dev))
+               return -EBUSY;
+       if (!is_valid_ether_addr(address->sa_data))
+               return -EADDRNOTAVAIL;
+
+       memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+       return enc28j60_set_hw_macaddr(dev);
+}
+
+/*
+ * Debug routine to dump useful register contents
+ */
+static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
+{
+       mutex_lock(&priv->lock);
+       printk(KERN_DEBUG DRV_NAME " %s\n"
+               "HwRevID: 0x%02x\n"
+               "Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n"
+               "       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n"
+               "MAC  : MACON1 MACON3 MACON4\n"
+               "       0x%02x   0x%02x   0x%02x\n"
+               "Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
+               "       0x%04x 0x%04x 0x%04x  0x%04x  "
+               "0x%02x    0x%02x    0x%04x\n"
+               "Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n"
+               "       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
+               msg, nolock_regb_read(priv, EREVID),
+               nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
+               nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
+               nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
+               nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
+               nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
+               nolock_regw_read(priv, ERXWRPTL),
+               nolock_regw_read(priv, ERXRDPTL),
+               nolock_regb_read(priv, ERXFCON),
+               nolock_regb_read(priv, EPKTCNT),
+               nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
+               nolock_regw_read(priv, ETXNDL),
+               nolock_regb_read(priv, MACLCON1),
+               nolock_regb_read(priv, MACLCON2),
+               nolock_regb_read(priv, MAPHSUP));
+       mutex_unlock(&priv->lock);
+}
+
+/*
+ * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
+ */
+static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
+{
+       u16 erxrdpt;
+
+       if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
+               erxrdpt = end;
+       else
+               erxrdpt = next_packet_ptr - 1;
+
+       return erxrdpt;
+}
+
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+       if (ptr + RSV_SIZE > RXEND_INIT)
+               return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
+       else
+               return ptr + RSV_SIZE;
+}
+
+static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
+{
+       u16 erxrdpt;
+
+       if (start > 0x1FFF || end > 0x1FFF || start > end) {
+               if (netif_msg_drv(priv))
+                       printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
+                               "bad parameters!\n", __func__, start, end);
+               return;
+       }
+       /* set receive buffer start + end */
+       priv->next_pk_ptr = start;
+       nolock_regw_write(priv, ERXSTL, start);
+       erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
+       nolock_regw_write(priv, ERXRDPTL, erxrdpt);
+       nolock_regw_write(priv, ERXNDL, end);
+}
+
+static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
+{
+       if (start > 0x1FFF || end > 0x1FFF || start > end) {
+               if (netif_msg_drv(priv))
+                       printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
+                               "bad parameters!\n", __func__, start, end);
+               return;
+       }
+       /* set transmit buffer start + end */
+       nolock_regw_write(priv, ETXSTL, start);
+       nolock_regw_write(priv, ETXNDL, end);
+}
+
+/*
+ * Low power mode shrinks power consumption about 100x, so we'd like
+ * the chip to be in that mode whenever it's inactive.  (However, we
+ * can't stay in lowpower mode during suspend with WOL active.)
+ */
+static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
+{
+       if (netif_msg_drv(priv))
+               dev_dbg(&priv->spi->dev, "%s power...\n",
+                               is_low ? "low" : "high");
+
+       mutex_lock(&priv->lock);
+       if (is_low) {
+               nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+               poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
+               poll_ready(priv, ECON1, ECON1_TXRTS, 0);
+               /* ECON2_VRPS was set during initialization */
+               nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
+       } else {
+               nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
+               poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
+               /* caller sets ECON1_RXEN */
+       }
+       mutex_unlock(&priv->lock);
+}
+
+static int enc28j60_hw_init(struct enc28j60_net *priv)
+{
+       u8 reg;
+
+       if (netif_msg_drv(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
+                       priv->full_duplex ? "FullDuplex" : "HalfDuplex");
+
+       mutex_lock(&priv->lock);
+       /* first reset the chip */
+       enc28j60_soft_reset(priv);
+       /* Clear ECON1 */
+       spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
+       priv->bank = 0;
+       priv->hw_enable = false;
+       priv->tx_retry_count = 0;
+       priv->max_pk_counter = 0;
+       priv->rxfilter = RXFILTER_NORMAL;
+       /* enable address auto increment and voltage regulator powersave */
+       nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
+
+       nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
+       nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
+       mutex_unlock(&priv->lock);
+
+       /*
+        * Check the RevID.
+        * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
+        * damaged
+        */
+       reg = locked_regb_read(priv, EREVID);
+       if (netif_msg_drv(priv))
+               printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
+       if (reg == 0x00 || reg == 0xff) {
+               if (netif_msg_drv(priv))
+                       printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
+                               __func__, reg);
+               return 0;
+       }
+
+       /* default filter mode: (unicast OR broadcast) AND crc valid */
+       locked_regb_write(priv, ERXFCON,
+                           ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
+
+       /* enable MAC receive */
+       locked_regb_write(priv, MACON1,
+                           MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
+       /* enable automatic padding and CRC operations */
+       if (priv->full_duplex) {
+               locked_regb_write(priv, MACON3,
+                                   MACON3_PADCFG0 | MACON3_TXCRCEN |
+                                   MACON3_FRMLNEN | MACON3_FULDPX);
+               /* set inter-frame gap (non-back-to-back) */
+               locked_regb_write(priv, MAIPGL, 0x12);
+               /* set inter-frame gap (back-to-back) */
+               locked_regb_write(priv, MABBIPG, 0x15);
+       } else {
+               locked_regb_write(priv, MACON3,
+                                   MACON3_PADCFG0 | MACON3_TXCRCEN |
+                                   MACON3_FRMLNEN);
+               locked_regb_write(priv, MACON4, 1 << 6);        /* DEFER bit */
+               /* set inter-frame gap (non-back-to-back) */
+               locked_regw_write(priv, MAIPGL, 0x0C12);
+               /* set inter-frame gap (back-to-back) */
+               locked_regb_write(priv, MABBIPG, 0x12);
+       }
+       /*
+        * MACLCON1 (default)
+        * MACLCON2 (default)
+        * Set the maximum packet size which the controller will accept
+        */
+       locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
+
+       /* Configure LEDs */
+       if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
+               return 0;
+
+       if (priv->full_duplex) {
+               if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
+                       return 0;
+               if (!enc28j60_phy_write(priv, PHCON2, 0x00))
+                       return 0;
+       } else {
+               if (!enc28j60_phy_write(priv, PHCON1, 0x00))
+                       return 0;
+               if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
+                       return 0;
+       }
+       if (netif_msg_hw(priv))
+               enc28j60_dump_regs(priv, "Hw initialized.");
+
+       return 1;
+}
+
+static void enc28j60_hw_enable(struct enc28j60_net *priv)
+{
+       /* enable interrupts */
+       if (netif_msg_hw(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
+                       __func__);
+
+       enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
+
+       mutex_lock(&priv->lock);
+       nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
+                        EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
+       nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
+                         EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
+
+       /* enable receive logic */
+       nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
+       priv->hw_enable = true;
+       mutex_unlock(&priv->lock);
+}
+
+static void enc28j60_hw_disable(struct enc28j60_net *priv)
+{
+       mutex_lock(&priv->lock);
+       /* disable interrutps and packet reception */
+       nolock_regb_write(priv, EIE, 0x00);
+       nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+       priv->hw_enable = false;
+       mutex_unlock(&priv->lock);
+}
+
+static int
+enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
+{
+       struct enc28j60_net *priv = netdev_priv(ndev);
+       int ret = 0;
+
+       if (!priv->hw_enable) {
+               /* link is in low power mode now; duplex setting
+                * will take effect on next enc28j60_hw_init().
+                */
+               if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
+                       priv->full_duplex = (duplex == DUPLEX_FULL);
+               else {
+                       if (netif_msg_link(priv))
+                               dev_warn(&ndev->dev,
+                                       "unsupported link setting\n");
+                       ret = -EOPNOTSUPP;
+               }
+       } else {
+               if (netif_msg_link(priv))
+                       dev_warn(&ndev->dev, "Warning: hw must be disabled "
+                               "to set link mode\n");
+               ret = -EBUSY;
+       }
+       return ret;
+}
+
+/*
+ * Read the Transmit Status Vector
+ */
+static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
+{
+       int endptr;
+
+       endptr = locked_regw_read(priv, ETXNDL);
+       if (netif_msg_hw(priv))
+               printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
+                        endptr + 1);
+       enc28j60_mem_read(priv, endptr + 1, TSV_SIZE, tsv);
+}
+
+static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
+                               u8 tsv[TSV_SIZE])
+{
+       u16 tmp1, tmp2;
+
+       printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
+       tmp1 = tsv[1];
+       tmp1 <<= 8;
+       tmp1 |= tsv[0];
+
+       tmp2 = tsv[5];
+       tmp2 <<= 8;
+       tmp2 |= tsv[4];
+
+       printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
+               " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
+       printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
+               " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
+               TSV_GETBIT(tsv, TSV_TXCRCERROR),
+               TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
+               TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
+       printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+               "PacketDefer: %d, ExDefer: %d\n",
+               TSV_GETBIT(tsv, TSV_TXMULTICAST),
+               TSV_GETBIT(tsv, TSV_TXBROADCAST),
+               TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
+               TSV_GETBIT(tsv, TSV_TXEXDEFER));
+       printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
+                "Giant: %d, Underrun: %d\n",
+                TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
+                TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
+                TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
+       printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
+                "BackPressApp: %d, VLanTagFrame: %d\n",
+                TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
+                TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
+                TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
+                TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
+}
+
+/*
+ * Receive Status vector
+ */
+static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
+                             u16 pk_ptr, int len, u16 sts)
+{
+       printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
+               msg, pk_ptr);
+       printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
+                RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
+       printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
+                " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
+                RSV_GETBIT(sts, RSV_CRCERROR),
+                RSV_GETBIT(sts, RSV_LENCHECKERR),
+                RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
+       printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
+                "LongDropEvent: %d, CarrierEvent: %d\n",
+                RSV_GETBIT(sts, RSV_RXMULTICAST),
+                RSV_GETBIT(sts, RSV_RXBROADCAST),
+                RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
+                RSV_GETBIT(sts, RSV_CARRIEREV));
+       printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
+                " UnknownOp: %d, VLanTagFrame: %d\n",
+                RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
+                RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
+                RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
+                RSV_GETBIT(sts, RSV_RXTYPEVLAN));
+}
+
+static void dump_packet(const char *msg, int len, const char *data)
+{
+       printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
+       print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
+                       data, len, true);
+}
+
+/*
+ * Hardware receive function.
+ * Read the buffer memory, update the FIFO pointer to free the buffer,
+ * check the status vector and decrement the packet counter.
+ */
+static void enc28j60_hw_rx(struct net_device *ndev)
+{
+       struct enc28j60_net *priv = netdev_priv(ndev);
+       struct sk_buff *skb = NULL;
+       u16 erxrdpt, next_packet, rxstat;
+       u8 rsv[RSV_SIZE];
+       int len;
+
+       if (netif_msg_rx_status(priv))
+               printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
+                       priv->next_pk_ptr);
+
+       if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
+               if (netif_msg_rx_err(priv))
+                       dev_err(&ndev->dev,
+                               "%s() Invalid packet address!! 0x%04x\n",
+                               __func__, priv->next_pk_ptr);
+               /* packet address corrupted: reset RX logic */
+               mutex_lock(&priv->lock);
+               nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
+               nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
+               nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
+               nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
+               nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
+               nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
+               mutex_unlock(&priv->lock);
+               ndev->stats.rx_errors++;
+               return;
+       }
+       /* Read next packet pointer and rx status vector */
+       enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
+
+       next_packet = rsv[1];
+       next_packet <<= 8;
+       next_packet |= rsv[0];
+
+       len = rsv[3];
+       len <<= 8;
+       len |= rsv[2];
+
+       rxstat = rsv[5];
+       rxstat <<= 8;
+       rxstat |= rsv[4];
+
+       if (netif_msg_rx_status(priv))
+               enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
+
+       if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
+               if (netif_msg_rx_err(priv))
+                       dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
+               ndev->stats.rx_errors++;
+               if (RSV_GETBIT(rxstat, RSV_CRCERROR))
+                       ndev->stats.rx_crc_errors++;
+               if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
+                       ndev->stats.rx_frame_errors++;
+               if (len > MAX_FRAMELEN)
+                       ndev->stats.rx_over_errors++;
+       } else {
+               skb = dev_alloc_skb(len + NET_IP_ALIGN);
+               if (!skb) {
+                       if (netif_msg_rx_err(priv))
+                               dev_err(&ndev->dev,
+                                       "out of memory for Rx'd frame\n");
+                       ndev->stats.rx_dropped++;
+               } else {
+                       skb->dev = ndev;
+                       skb_reserve(skb, NET_IP_ALIGN);
+                       /* copy the packet from the receive buffer */
+                       enc28j60_mem_read(priv,
+                               rx_packet_start(priv->next_pk_ptr),
+                               len, skb_put(skb, len));
+                       if (netif_msg_pktdata(priv))
+                               dump_packet(__func__, skb->len, skb->data);
+                       skb->protocol = eth_type_trans(skb, ndev);
+                       /* update statistics */
+                       ndev->stats.rx_packets++;
+                       ndev->stats.rx_bytes += len;
+                       netif_rx_ni(skb);
+               }
+       }
+       /*
+        * Move the RX read pointer to the start of the next
+        * received packet.
+        * This frees the memory we just read out
+        */
+       erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
+       if (netif_msg_hw(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
+                       __func__, erxrdpt);
+
+       mutex_lock(&priv->lock);
+       nolock_regw_write(priv, ERXRDPTL, erxrdpt);
+#ifdef CONFIG_ENC28J60_WRITEVERIFY
+       if (netif_msg_drv(priv)) {
+               u16 reg;
+               reg = nolock_regw_read(priv, ERXRDPTL);
+               if (reg != erxrdpt)
+                       printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
+                               "error (0x%04x - 0x%04x)\n", __func__,
+                               reg, erxrdpt);
+       }
+#endif
+       priv->next_pk_ptr = next_packet;
+       /* we are done with this packet, decrement the packet counter */
+       nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
+       mutex_unlock(&priv->lock);
+}
+
+/*
+ * Calculate free space in RxFIFO
+ */
+static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
+{
+       int epkcnt, erxst, erxnd, erxwr, erxrd;
+       int free_space;
+
+       mutex_lock(&priv->lock);
+       epkcnt = nolock_regb_read(priv, EPKTCNT);
+       if (epkcnt >= 255)
+               free_space = -1;
+       else {
+               erxst = nolock_regw_read(priv, ERXSTL);
+               erxnd = nolock_regw_read(priv, ERXNDL);
+               erxwr = nolock_regw_read(priv, ERXWRPTL);
+               erxrd = nolock_regw_read(priv, ERXRDPTL);
+
+               if (erxwr > erxrd)
+                       free_space = (erxnd - erxst) - (erxwr - erxrd);
+               else if (erxwr == erxrd)
+                       free_space = (erxnd - erxst);
+               else
+                       free_space = erxrd - erxwr - 1;
+       }
+       mutex_unlock(&priv->lock);
+       if (netif_msg_rx_status(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
+                       __func__, free_space);
+       return free_space;
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc28j60_check_link_status(struct net_device *ndev)
+{
+       struct enc28j60_net *priv = netdev_priv(ndev);
+       u16 reg;
+       int duplex;
+
+       reg = enc28j60_phy_read(priv, PHSTAT2);
+       if (netif_msg_hw(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
+                       "PHSTAT2: %04x\n", __func__,
+                       enc28j60_phy_read(priv, PHSTAT1), reg);
+       duplex = reg & PHSTAT2_DPXSTAT;
+
+       if (reg & PHSTAT2_LSTAT) {
+               netif_carrier_on(ndev);
+               if (netif_msg_ifup(priv))
+                       dev_info(&ndev->dev, "link up - %s\n",
+                               duplex ? "Full duplex" : "Half duplex");
+       } else {
+               if (netif_msg_ifdown(priv))
+                       dev_info(&ndev->dev, "link down\n");
+               netif_carrier_off(ndev);
+       }
+}
+
+static void enc28j60_tx_clear(struct net_device *ndev, bool err)
+{
+       struct enc28j60_net *priv = netdev_priv(ndev);
+
+       if (err)
+               ndev->stats.tx_errors++;
+       else
+               ndev->stats.tx_packets++;
+
+       if (priv->tx_skb) {
+               if (!err)
+                       ndev->stats.tx_bytes += priv->tx_skb->len;
+               dev_kfree_skb(priv->tx_skb);
+               priv->tx_skb = NULL;
+       }
+       locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
+       netif_wake_queue(ndev);
+}
+
+/*
+ * RX handler
+ * ignore PKTIF because is unreliable! (look at the errata datasheet)
+ * check EPKTCNT is the suggested workaround.
+ * We don't need to clear interrupt flag, automatically done when
+ * enc28j60_hw_rx() decrements the packet counter.
+ * Returns how many packet processed.
+ */
+static int enc28j60_rx_interrupt(struct net_device *ndev)
+{
+       struct enc28j60_net *priv = netdev_priv(ndev);
+       int pk_counter, ret;
+
+       pk_counter = locked_regb_read(priv, EPKTCNT);
+       if (pk_counter && netif_msg_intr(priv))
+               printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
+       if (pk_counter > priv->max_pk_counter) {
+               /* update statistics */
+               priv->max_pk_counter = pk_counter;
+               if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
+                       printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
+                               priv->max_pk_counter);
+       }
+       ret = pk_counter;
+       while (pk_counter-- > 0)
+               enc28j60_hw_rx(ndev);
+
+       return ret;
+}
+
+static void enc28j60_irq_work_handler(struct work_struct *work)
+{
+       struct enc28j60_net *priv =
+               container_of(work, struct enc28j60_net, irq_work);
+       struct net_device *ndev = priv->netdev;
+       int intflags, loop;
+
+       if (netif_msg_intr(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+       /* disable further interrupts */
+       locked_reg_bfclr(priv, EIE, EIE_INTIE);
+
+       do {
+               loop = 0;
+               intflags = locked_regb_read(priv, EIR);
+               /* DMA interrupt handler (not currently used) */
+               if ((intflags & EIR_DMAIF) != 0) {
+                       loop++;
+                       if (netif_msg_intr(priv))
+                               printk(KERN_DEBUG DRV_NAME
+                                       ": intDMA(%d)\n", loop);
+                       locked_reg_bfclr(priv, EIR, EIR_DMAIF);
+               }
+               /* LINK changed handler */
+               if ((intflags & EIR_LINKIF) != 0) {
+                       loop++;
+                       if (netif_msg_intr(priv))
+                               printk(KERN_DEBUG DRV_NAME
+                                       ": intLINK(%d)\n", loop);
+                       enc28j60_check_link_status(ndev);
+                       /* read PHIR to clear the flag */
+                       enc28j60_phy_read(priv, PHIR);
+               }
+               /* TX complete handler */
+               if ((intflags & EIR_TXIF) != 0) {
+                       bool err = false;
+                       loop++;
+                       if (netif_msg_intr(priv))
+                               printk(KERN_DEBUG DRV_NAME
+                                       ": intTX(%d)\n", loop);
+                       priv->tx_retry_count = 0;
+                       if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
+                               if (netif_msg_tx_err(priv))
+                                       dev_err(&ndev->dev,
+                                               "Tx Error (aborted)\n");
+                               err = true;
+                       }
+                       if (netif_msg_tx_done(priv)) {
+                               u8 tsv[TSV_SIZE];
+                               enc28j60_read_tsv(priv, tsv);
+                               enc28j60_dump_tsv(priv, "Tx Done", tsv);
+                       }
+                       enc28j60_tx_clear(ndev, err);
+                       locked_reg_bfclr(priv, EIR, EIR_TXIF);
+               }
+               /* TX Error handler */
+               if ((intflags & EIR_TXERIF) != 0) {
+                       u8 tsv[TSV_SIZE];
+
+                       loop++;
+                       if (netif_msg_intr(priv))
+                               printk(KERN_DEBUG DRV_NAME
+                                       ": intTXErr(%d)\n", loop);
+                       locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
+                       enc28j60_read_tsv(priv, tsv);
+                       if (netif_msg_tx_err(priv))
+                               enc28j60_dump_tsv(priv, "Tx Error", tsv);
+                       /* Reset TX logic */
+                       mutex_lock(&priv->lock);
+                       nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
+                       nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
+                       nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
+                       mutex_unlock(&priv->lock);
+                       /* Transmit Late collision check for retransmit */
+                       if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
+                               if (netif_msg_tx_err(priv))
+                                       printk(KERN_DEBUG DRV_NAME
+                                               ": LateCollision TXErr (%d)\n",
+                                               priv->tx_retry_count);
+                               if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
+                                       locked_reg_bfset(priv, ECON1,
+                                                          ECON1_TXRTS);
+                               else
+                                       enc28j60_tx_clear(ndev, true);
+                       } else
+                               enc28j60_tx_clear(ndev, true);
+                       locked_reg_bfclr(priv, EIR, EIR_TXERIF);
+               }
+               /* RX Error handler */
+               if ((intflags & EIR_RXERIF) != 0) {
+                       loop++;
+                       if (netif_msg_intr(priv))
+                               printk(KERN_DEBUG DRV_NAME
+                                       ": intRXErr(%d)\n", loop);
+                       /* Check free FIFO space to flag RX overrun */
+                       if (enc28j60_get_free_rxfifo(priv) <= 0) {
+                               if (netif_msg_rx_err(priv))
+                                       printk(KERN_DEBUG DRV_NAME
+                                               ": RX Overrun\n");
+                               ndev->stats.rx_dropped++;
+                       }
+                       locked_reg_bfclr(priv, EIR, EIR_RXERIF);
+               }
+               /* RX handler */
+               if (enc28j60_rx_interrupt(ndev))
+                       loop++;
+       } while (loop);
+
+       /* re-enable interrupts */
+       locked_reg_bfset(priv, EIE, EIE_INTIE);
+       if (netif_msg_intr(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
+}
+
+/*
+ * Hardware transmit function.
+ * Fill the buffer memory and send the contents of the transmit buffer
+ * onto the network
+ */
+static void enc28j60_hw_tx(struct enc28j60_net *priv)
+{
+       if (netif_msg_tx_queued(priv))
+               printk(KERN_DEBUG DRV_NAME
+                       ": Tx Packet Len:%d\n", priv->tx_skb->len);
+
+       if (netif_msg_pktdata(priv))
+               dump_packet(__func__,
+                           priv->tx_skb->len, priv->tx_skb->data);
+       enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
+
+#ifdef CONFIG_ENC28J60_WRITEVERIFY
+       /* readback and verify written data */
+       if (netif_msg_drv(priv)) {
+               int test_len, k;
+               u8 test_buf[64]; /* limit the test to the first 64 bytes */
+               int okflag;
+
+               test_len = priv->tx_skb->len;
+               if (test_len > sizeof(test_buf))
+                       test_len = sizeof(test_buf);
+
+               /* + 1 to skip control byte */
+               enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
+               okflag = 1;
+               for (k = 0; k < test_len; k++) {
+                       if (priv->tx_skb->data[k] != test_buf[k]) {
+                               printk(KERN_DEBUG DRV_NAME
+                                        ": Error, %d location differ: "
+                                        "0x%02x-0x%02x\n", k,
+                                        priv->tx_skb->data[k], test_buf[k]);
+                               okflag = 0;
+                       }
+               }
+               if (!okflag)
+                       printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
+                               "verify ERROR!\n");
+       }
+#endif
+       /* set TX request flag */
+       locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
+}
+
+static netdev_tx_t enc28j60_send_packet(struct sk_buff *skb,
+                                       struct net_device *dev)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+
+       if (netif_msg_tx_queued(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+       /* If some error occurs while trying to transmit this
+        * packet, you should return '1' from this function.
+        * In such a case you _may not_ do anything to the
+        * SKB, it is still owned by the network queueing
+        * layer when an error is returned.  This means you
+        * may not modify any SKB fields, you may not free
+        * the SKB, etc.
+        */
+       netif_stop_queue(dev);
+
+       /* Remember the skb for deferred processing */
+       priv->tx_skb = skb;
+       schedule_work(&priv->tx_work);
+
+       return NETDEV_TX_OK;
+}
+
+static void enc28j60_tx_work_handler(struct work_struct *work)
+{
+       struct enc28j60_net *priv =
+               container_of(work, struct enc28j60_net, tx_work);
+
+       /* actual delivery of data */
+       enc28j60_hw_tx(priv);
+}
+
+static irqreturn_t enc28j60_irq(int irq, void *dev_id)
+{
+       struct enc28j60_net *priv = dev_id;
+
+       /*
+        * Can't do anything in interrupt context because we need to
+        * block (spi_sync() is blocking) so fire of the interrupt
+        * handling workqueue.
+        * Remember that we access enc28j60 registers through SPI bus
+        * via spi_sync() call.
+        */
+       schedule_work(&priv->irq_work);
+
+       return IRQ_HANDLED;
+}
+
+static void enc28j60_tx_timeout(struct net_device *ndev)
+{
+       struct enc28j60_net *priv = netdev_priv(ndev);
+
+       if (netif_msg_timer(priv))
+               dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
+
+       ndev->stats.tx_errors++;
+       /* can't restart safely under softirq */
+       schedule_work(&priv->restart_work);
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+static int enc28j60_net_open(struct net_device *dev)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+
+       if (netif_msg_drv(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+       if (!is_valid_ether_addr(dev->dev_addr)) {
+               if (netif_msg_ifup(priv))
+                       dev_err(&dev->dev, "invalid MAC address %pM\n",
+                               dev->dev_addr);
+               return -EADDRNOTAVAIL;
+       }
+       /* Reset the hardware here (and take it out of low power mode) */
+       enc28j60_lowpower(priv, false);
+       enc28j60_hw_disable(priv);
+       if (!enc28j60_hw_init(priv)) {
+               if (netif_msg_ifup(priv))
+                       dev_err(&dev->dev, "hw_reset() failed\n");
+               return -EINVAL;
+       }
+       /* Update the MAC address (in case user has changed it) */
+       enc28j60_set_hw_macaddr(dev);
+       /* Enable interrupts */
+       enc28j60_hw_enable(priv);
+       /* check link status */
+       enc28j60_check_link_status(dev);
+       /* We are now ready to accept transmit requests from
+        * the queueing layer of the networking.
+        */
+       netif_start_queue(dev);
+
+       return 0;
+}
+
+/* The inverse routine to net_open(). */
+static int enc28j60_net_close(struct net_device *dev)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+
+       if (netif_msg_drv(priv))
+               printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
+
+       enc28j60_hw_disable(priv);
+       enc28j60_lowpower(priv, true);
+       netif_stop_queue(dev);
+
+       return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adapter
+ * num_addrs == -1     Promiscuous mode, receive all packets
+ * num_addrs == 0      Normal mode, filter out multicast packets
+ * num_addrs > 0       Multicast mode, receive normal and MC packets
+ */
+static void enc28j60_set_multicast_list(struct net_device *dev)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+       int oldfilter = priv->rxfilter;
+
+       if (dev->flags & IFF_PROMISC) {
+               if (netif_msg_link(priv))
+                       dev_info(&dev->dev, "promiscuous mode\n");
+               priv->rxfilter = RXFILTER_PROMISC;
+       } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
+               if (netif_msg_link(priv))
+                       dev_info(&dev->dev, "%smulticast mode\n",
+                               (dev->flags & IFF_ALLMULTI) ? "all-" : "");
+               priv->rxfilter = RXFILTER_MULTI;
+       } else {
+               if (netif_msg_link(priv))
+                       dev_info(&dev->dev, "normal mode\n");
+               priv->rxfilter = RXFILTER_NORMAL;
+       }
+
+       if (oldfilter != priv->rxfilter)
+               schedule_work(&priv->setrx_work);
+}
+
+static void enc28j60_setrx_work_handler(struct work_struct *work)
+{
+       struct enc28j60_net *priv =
+               container_of(work, struct enc28j60_net, setrx_work);
+
+       if (priv->rxfilter == RXFILTER_PROMISC) {
+               if (netif_msg_drv(priv))
+                       printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
+               locked_regb_write(priv, ERXFCON, 0x00);
+       } else if (priv->rxfilter == RXFILTER_MULTI) {
+               if (netif_msg_drv(priv))
+                       printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
+               locked_regb_write(priv, ERXFCON,
+                                       ERXFCON_UCEN | ERXFCON_CRCEN |
+                                       ERXFCON_BCEN | ERXFCON_MCEN);
+       } else {
+               if (netif_msg_drv(priv))
+                       printk(KERN_DEBUG DRV_NAME ": normal mode\n");
+               locked_regb_write(priv, ERXFCON,
+                                       ERXFCON_UCEN | ERXFCON_CRCEN |
+                                       ERXFCON_BCEN);
+       }
+}
+
+static void enc28j60_restart_work_handler(struct work_struct *work)
+{
+       struct enc28j60_net *priv =
+                       container_of(work, struct enc28j60_net, restart_work);
+       struct net_device *ndev = priv->netdev;
+       int ret;
+
+       rtnl_lock();
+       if (netif_running(ndev)) {
+               enc28j60_net_close(ndev);
+               ret = enc28j60_net_open(ndev);
+               if (unlikely(ret)) {
+                       dev_info(&ndev->dev, " could not restart %d\n", ret);
+                       dev_close(ndev);
+               }
+       }
+       rtnl_unlock();
+}
+
+/* ......................... ETHTOOL SUPPORT ........................... */
+
+static void
+enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+       strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+       strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+       strlcpy(info->bus_info,
+               dev_name(dev->dev.parent), sizeof(info->bus_info));
+}
+
+static int
+enc28j60_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+
+       cmd->transceiver = XCVR_INTERNAL;
+       cmd->supported  = SUPPORTED_10baseT_Half
+                       | SUPPORTED_10baseT_Full
+                       | SUPPORTED_TP;
+       ethtool_cmd_speed_set(cmd,  SPEED_10);
+       cmd->duplex     = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
+       cmd->port       = PORT_TP;
+       cmd->autoneg    = AUTONEG_DISABLE;
+
+       return 0;
+}
+
+static int
+enc28j60_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+       return enc28j60_setlink(dev, cmd->autoneg,
+                               ethtool_cmd_speed(cmd), cmd->duplex);
+}
+
+static u32 enc28j60_get_msglevel(struct net_device *dev)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+       return priv->msg_enable;
+}
+
+static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+       priv->msg_enable = val;
+}
+
+static const struct ethtool_ops enc28j60_ethtool_ops = {
+       .get_settings   = enc28j60_get_settings,
+       .set_settings   = enc28j60_set_settings,
+       .get_drvinfo    = enc28j60_get_drvinfo,
+       .get_msglevel   = enc28j60_get_msglevel,
+       .set_msglevel   = enc28j60_set_msglevel,
+};
+
+static int enc28j60_chipset_init(struct net_device *dev)
+{
+       struct enc28j60_net *priv = netdev_priv(dev);
+
+       return enc28j60_hw_init(priv);
+}
+
+static const struct net_device_ops enc28j60_netdev_ops = {
+       .ndo_open               = enc28j60_net_open,
+       .ndo_stop               = enc28j60_net_close,
+       .ndo_start_xmit         = enc28j60_send_packet,
+       .ndo_set_multicast_list = enc28j60_set_multicast_list,
+       .ndo_set_mac_address    = enc28j60_set_mac_address,
+       .ndo_tx_timeout         = enc28j60_tx_timeout,
+       .ndo_change_mtu         = eth_change_mtu,
+       .ndo_validate_addr      = eth_validate_addr,
+};
+
+static int __devinit enc28j60_probe(struct spi_device *spi)
+{
+       struct net_device *dev;
+       struct enc28j60_net *priv;
+       int ret = 0;
+
+       if (netif_msg_drv(&debug))
+               dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
+                       DRV_VERSION);
+
+       dev = alloc_etherdev(sizeof(struct enc28j60_net));
+       if (!dev) {
+               if (netif_msg_drv(&debug))
+                       dev_err(&spi->dev, DRV_NAME
+                               ": unable to alloc new ethernet\n");
+               ret = -ENOMEM;
+               goto error_alloc;
+       }
+       priv = netdev_priv(dev);
+
+       priv->netdev = dev;     /* priv to netdev reference */
+       priv->spi = spi;        /* priv to spi reference */
+       priv->msg_enable = netif_msg_init(debug.msg_enable,
+                                               ENC28J60_MSG_DEFAULT);
+       mutex_init(&priv->lock);
+       INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
+       INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
+       INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
+       INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
+       dev_set_drvdata(&spi->dev, priv);       /* spi to priv reference */
+       SET_NETDEV_DEV(dev, &spi->dev);
+
+       if (!enc28j60_chipset_init(dev)) {
+               if (netif_msg_probe(priv))
+                       dev_info(&spi->dev, DRV_NAME " chip not found\n");
+               ret = -EIO;
+               goto error_irq;
+       }
+       random_ether_addr(dev->dev_addr);
+       enc28j60_set_hw_macaddr(dev);
+
+       /* Board setup must set the relevant edge trigger type;
+        * level triggers won't currently work.
+        */
+       ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
+       if (ret < 0) {
+               if (netif_msg_probe(priv))
+                       dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
+                               "(ret = %d)\n", spi->irq, ret);
+               goto error_irq;
+       }
+
+       dev->if_port = IF_PORT_10BASET;
+       dev->irq = spi->irq;
+       dev->netdev_ops = &enc28j60_netdev_ops;
+       dev->watchdog_timeo = TX_TIMEOUT;
+       SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops);
+
+       enc28j60_lowpower(priv, true);
+
+       ret = register_netdev(dev);
+       if (ret) {
+               if (netif_msg_probe(priv))
+                       dev_err(&spi->dev, "register netdev " DRV_NAME
+                               " failed (ret = %d)\n", ret);
+               goto error_register;
+       }
+       dev_info(&dev->dev, DRV_NAME " driver registered\n");
+
+       return 0;
+
+error_register:
+       free_irq(spi->irq, priv);
+error_irq:
+       free_netdev(dev);
+error_alloc:
+       return ret;
+}
+
+static int __devexit enc28j60_remove(struct spi_device *spi)
+{
+       struct enc28j60_net *priv = dev_get_drvdata(&spi->dev);
+
+       if (netif_msg_drv(priv))
+               printk(KERN_DEBUG DRV_NAME ": remove\n");
+
+       unregister_netdev(priv->netdev);
+       free_irq(spi->irq, priv);
+       free_netdev(priv->netdev);
+
+       return 0;
+}
+
+static struct spi_driver enc28j60_driver = {
+       .driver = {
+                  .name = DRV_NAME,
+                  .owner = THIS_MODULE,
+        },
+       .probe = enc28j60_probe,
+       .remove = __devexit_p(enc28j60_remove),
+};
+
+static int __init enc28j60_init(void)
+{
+       msec20_to_jiffies = msecs_to_jiffies(20);
+
+       return spi_register_driver(&enc28j60_driver);
+}
+
+module_init(enc28j60_init);
+
+static void __exit enc28j60_exit(void)
+{
+       spi_unregister_driver(&enc28j60_driver);
+}
+
+module_exit(enc28j60_exit);
+
+MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
+MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
+MODULE_LICENSE("GPL");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
+MODULE_ALIAS("spi:" DRV_NAME);
diff --git a/drivers/net/ethernet/microchip/enc28j60_hw.h b/drivers/net/ethernet/microchip/enc28j60_hw.h
new file mode 100644 (file)
index 0000000..25b41de
--- /dev/null
@@ -0,0 +1,309 @@
+/*
+ * enc28j60_hw.h: EDTP FrameThrower style enc28j60 registers
+ *
+ * $Id: enc28j60_hw.h,v 1.9 2007/12/14 11:59:16 claudio Exp $
+ */
+
+#ifndef _ENC28J60_HW_H
+#define _ENC28J60_HW_H
+
+/*
+ * ENC28J60 Control Registers
+ * Control register definitions are a combination of address,
+ * bank number, and Ethernet/MAC/PHY indicator bits.
+ * - Register address  (bits 0-4)
+ * - Bank number       (bits 5-6)
+ * - MAC/MII indicator (bit 7)
+ */
+#define ADDR_MASK      0x1F
+#define BANK_MASK      0x60
+#define SPRD_MASK      0x80
+/* All-bank registers */
+#define EIE            0x1B
+#define EIR            0x1C
+#define ESTAT          0x1D
+#define ECON2          0x1E
+#define ECON1          0x1F
+/* Bank 0 registers */
+#define ERDPTL         (0x00|0x00)
+#define ERDPTH         (0x01|0x00)
+#define EWRPTL         (0x02|0x00)
+#define EWRPTH         (0x03|0x00)
+#define ETXSTL         (0x04|0x00)
+#define ETXSTH         (0x05|0x00)
+#define ETXNDL         (0x06|0x00)
+#define ETXNDH         (0x07|0x00)
+#define ERXSTL         (0x08|0x00)
+#define ERXSTH         (0x09|0x00)
+#define ERXNDL         (0x0A|0x00)
+#define ERXNDH         (0x0B|0x00)
+#define ERXRDPTL       (0x0C|0x00)
+#define ERXRDPTH       (0x0D|0x00)
+#define ERXWRPTL       (0x0E|0x00)
+#define ERXWRPTH       (0x0F|0x00)
+#define EDMASTL                (0x10|0x00)
+#define EDMASTH                (0x11|0x00)
+#define EDMANDL                (0x12|0x00)
+#define EDMANDH                (0x13|0x00)
+#define EDMADSTL       (0x14|0x00)
+#define EDMADSTH       (0x15|0x00)
+#define EDMACSL                (0x16|0x00)
+#define EDMACSH                (0x17|0x00)
+/* Bank 1 registers */
+#define EHT0           (0x00|0x20)
+#define EHT1           (0x01|0x20)
+#define EHT2           (0x02|0x20)
+#define EHT3           (0x03|0x20)
+#define EHT4           (0x04|0x20)
+#define EHT5           (0x05|0x20)
+#define EHT6           (0x06|0x20)
+#define EHT7           (0x07|0x20)
+#define EPMM0          (0x08|0x20)
+#define EPMM1          (0x09|0x20)
+#define EPMM2          (0x0A|0x20)
+#define EPMM3          (0x0B|0x20)
+#define EPMM4          (0x0C|0x20)
+#define EPMM5          (0x0D|0x20)
+#define EPMM6          (0x0E|0x20)
+#define EPMM7          (0x0F|0x20)
+#define EPMCSL         (0x10|0x20)
+#define EPMCSH         (0x11|0x20)
+#define EPMOL          (0x14|0x20)
+#define EPMOH          (0x15|0x20)
+#define EWOLIE         (0x16|0x20)
+#define EWOLIR         (0x17|0x20)
+#define ERXFCON                (0x18|0x20)
+#define EPKTCNT                (0x19|0x20)
+/* Bank 2 registers */
+#define MACON1         (0x00|0x40|SPRD_MASK)
+/* #define MACON2      (0x01|0x40|SPRD_MASK) */
+#define MACON3         (0x02|0x40|SPRD_MASK)
+#define MACON4         (0x03|0x40|SPRD_MASK)
+#define MABBIPG                (0x04|0x40|SPRD_MASK)
+#define MAIPGL         (0x06|0x40|SPRD_MASK)
+#define MAIPGH         (0x07|0x40|SPRD_MASK)
+#define MACLCON1       (0x08|0x40|SPRD_MASK)
+#define MACLCON2       (0x09|0x40|SPRD_MASK)
+#define MAMXFLL                (0x0A|0x40|SPRD_MASK)
+#define MAMXFLH                (0x0B|0x40|SPRD_MASK)
+#define MAPHSUP                (0x0D|0x40|SPRD_MASK)
+#define MICON          (0x11|0x40|SPRD_MASK)
+#define MICMD          (0x12|0x40|SPRD_MASK)
+#define MIREGADR       (0x14|0x40|SPRD_MASK)
+#define MIWRL          (0x16|0x40|SPRD_MASK)
+#define MIWRH          (0x17|0x40|SPRD_MASK)
+#define MIRDL          (0x18|0x40|SPRD_MASK)
+#define MIRDH          (0x19|0x40|SPRD_MASK)
+/* Bank 3 registers */
+#define MAADR1         (0x00|0x60|SPRD_MASK)
+#define MAADR0         (0x01|0x60|SPRD_MASK)
+#define MAADR3         (0x02|0x60|SPRD_MASK)
+#define MAADR2         (0x03|0x60|SPRD_MASK)
+#define MAADR5         (0x04|0x60|SPRD_MASK)
+#define MAADR4         (0x05|0x60|SPRD_MASK)
+#define EBSTSD         (0x06|0x60)
+#define EBSTCON                (0x07|0x60)
+#define EBSTCSL                (0x08|0x60)
+#define EBSTCSH                (0x09|0x60)
+#define MISTAT         (0x0A|0x60|SPRD_MASK)
+#define EREVID         (0x12|0x60)
+#define ECOCON         (0x15|0x60)
+#define EFLOCON                (0x17|0x60)
+#define EPAUSL         (0x18|0x60)
+#define EPAUSH         (0x19|0x60)
+/* PHY registers */
+#define PHCON1         0x00
+#define PHSTAT1                0x01
+#define PHHID1         0x02
+#define PHHID2         0x03
+#define PHCON2         0x10
+#define PHSTAT2                0x11
+#define PHIE           0x12
+#define PHIR           0x13
+#define PHLCON         0x14
+
+/* ENC28J60 EIE Register Bit Definitions */
+#define EIE_INTIE      0x80
+#define EIE_PKTIE      0x40
+#define EIE_DMAIE      0x20
+#define EIE_LINKIE     0x10
+#define EIE_TXIE       0x08
+/* #define EIE_WOLIE   0x04 (reserved) */
+#define EIE_TXERIE     0x02
+#define EIE_RXERIE     0x01
+/* ENC28J60 EIR Register Bit Definitions */
+#define EIR_PKTIF      0x40
+#define EIR_DMAIF      0x20
+#define EIR_LINKIF     0x10
+#define EIR_TXIF       0x08
+/* #define EIR_WOLIF   0x04 (reserved) */
+#define EIR_TXERIF     0x02
+#define EIR_RXERIF     0x01
+/* ENC28J60 ESTAT Register Bit Definitions */
+#define ESTAT_INT      0x80
+#define ESTAT_LATECOL  0x10
+#define ESTAT_RXBUSY   0x04
+#define ESTAT_TXABRT   0x02
+#define ESTAT_CLKRDY   0x01
+/* ENC28J60 ECON2 Register Bit Definitions */
+#define ECON2_AUTOINC  0x80
+#define ECON2_PKTDEC   0x40
+#define ECON2_PWRSV    0x20
+#define ECON2_VRPS     0x08
+/* ENC28J60 ECON1 Register Bit Definitions */
+#define ECON1_TXRST    0x80
+#define ECON1_RXRST    0x40
+#define ECON1_DMAST    0x20
+#define ECON1_CSUMEN   0x10
+#define ECON1_TXRTS    0x08
+#define ECON1_RXEN     0x04
+#define ECON1_BSEL1    0x02
+#define ECON1_BSEL0    0x01
+/* ENC28J60 MACON1 Register Bit Definitions */
+#define MACON1_LOOPBK  0x10
+#define MACON1_TXPAUS  0x08
+#define MACON1_RXPAUS  0x04
+#define MACON1_PASSALL 0x02
+#define MACON1_MARXEN  0x01
+/* ENC28J60 MACON2 Register Bit Definitions */
+#define MACON2_MARST   0x80
+#define MACON2_RNDRST  0x40
+#define MACON2_MARXRST 0x08
+#define MACON2_RFUNRST 0x04
+#define MACON2_MATXRST 0x02
+#define MACON2_TFUNRST 0x01
+/* ENC28J60 MACON3 Register Bit Definitions */
+#define MACON3_PADCFG2 0x80
+#define MACON3_PADCFG1 0x40
+#define MACON3_PADCFG0 0x20
+#define MACON3_TXCRCEN 0x10
+#define MACON3_PHDRLEN 0x08
+#define MACON3_HFRMLEN 0x04
+#define MACON3_FRMLNEN 0x02
+#define MACON3_FULDPX  0x01
+/* ENC28J60 MICMD Register Bit Definitions */
+#define MICMD_MIISCAN  0x02
+#define MICMD_MIIRD    0x01
+/* ENC28J60 MISTAT Register Bit Definitions */
+#define MISTAT_NVALID  0x04
+#define MISTAT_SCAN    0x02
+#define MISTAT_BUSY    0x01
+/* ENC28J60 ERXFCON Register Bit Definitions */
+#define ERXFCON_UCEN   0x80
+#define ERXFCON_ANDOR  0x40
+#define ERXFCON_CRCEN  0x20
+#define ERXFCON_PMEN   0x10
+#define ERXFCON_MPEN   0x08
+#define ERXFCON_HTEN   0x04
+#define ERXFCON_MCEN   0x02
+#define ERXFCON_BCEN   0x01
+
+/* ENC28J60 PHY PHCON1 Register Bit Definitions */
+#define PHCON1_PRST    0x8000
+#define PHCON1_PLOOPBK 0x4000
+#define PHCON1_PPWRSV  0x0800
+#define PHCON1_PDPXMD  0x0100
+/* ENC28J60 PHY PHSTAT1 Register Bit Definitions */
+#define PHSTAT1_PFDPX  0x1000
+#define PHSTAT1_PHDPX  0x0800
+#define PHSTAT1_LLSTAT 0x0004
+#define PHSTAT1_JBSTAT 0x0002
+/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */
+#define PHSTAT2_TXSTAT (1 << 13)
+#define PHSTAT2_RXSTAT (1 << 12)
+#define PHSTAT2_COLSTAT        (1 << 11)
+#define PHSTAT2_LSTAT  (1 << 10)
+#define PHSTAT2_DPXSTAT        (1 << 9)
+#define PHSTAT2_PLRITY (1 << 5)
+/* ENC28J60 PHY PHCON2 Register Bit Definitions */
+#define PHCON2_FRCLINK 0x4000
+#define PHCON2_TXDIS   0x2000
+#define PHCON2_JABBER  0x0400
+#define PHCON2_HDLDIS  0x0100
+/* ENC28J60 PHY PHIE Register Bit Definitions */
+#define PHIE_PLNKIE    (1 << 4)
+#define PHIE_PGEIE     (1 << 1)
+/* ENC28J60 PHY PHIR Register Bit Definitions */
+#define PHIR_PLNKIF    (1 << 4)
+#define PHIR_PGEIF     (1 << 1)
+
+/* ENC28J60 Packet Control Byte Bit Definitions */
+#define PKTCTRL_PHUGEEN                0x08
+#define PKTCTRL_PPADEN         0x04
+#define PKTCTRL_PCRCEN         0x02
+#define PKTCTRL_POVERRIDE      0x01
+
+/* ENC28J60 Transmit Status Vector */
+#define TSV_TXBYTECNT          0
+#define TSV_TXCOLLISIONCNT     16
+#define TSV_TXCRCERROR         20
+#define TSV_TXLENCHKERROR      21
+#define TSV_TXLENOUTOFRANGE    22
+#define TSV_TXDONE             23
+#define TSV_TXMULTICAST                24
+#define TSV_TXBROADCAST                25
+#define TSV_TXPACKETDEFER      26
+#define TSV_TXEXDEFER          27
+#define TSV_TXEXCOLLISION      28
+#define TSV_TXLATECOLLISION    29
+#define TSV_TXGIANT            30
+#define TSV_TXUNDERRUN         31
+#define TSV_TOTBYTETXONWIRE    32
+#define TSV_TXCONTROLFRAME     48
+#define TSV_TXPAUSEFRAME       49
+#define TSV_BACKPRESSUREAPP    50
+#define TSV_TXVLANTAGFRAME     51
+
+#define TSV_SIZE               7
+#define TSV_BYTEOF(x)          ((x) / 8)
+#define TSV_BITMASK(x)         (1 << ((x) % 8))
+#define TSV_GETBIT(x, y)       (((x)[TSV_BYTEOF(y)] & TSV_BITMASK(y)) ? 1 : 0)
+
+/* ENC28J60 Receive Status Vector */
+#define RSV_RXLONGEVDROPEV     16
+#define RSV_CARRIEREV          18
+#define RSV_CRCERROR           20
+#define RSV_LENCHECKERR                21
+#define RSV_LENOUTOFRANGE      22
+#define RSV_RXOK               23
+#define RSV_RXMULTICAST                24
+#define RSV_RXBROADCAST                25
+#define RSV_DRIBBLENIBBLE      26
+#define RSV_RXCONTROLFRAME     27
+#define RSV_RXPAUSEFRAME       28
+#define RSV_RXUNKNOWNOPCODE    29
+#define RSV_RXTYPEVLAN         30
+
+#define RSV_SIZE               6
+#define RSV_BITMASK(x)         (1 << ((x) - 16))
+#define RSV_GETBIT(x, y)       (((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+
+/* SPI operation codes */
+#define ENC28J60_READ_CTRL_REG 0x00
+#define ENC28J60_READ_BUF_MEM  0x3A
+#define ENC28J60_WRITE_CTRL_REG 0x40
+#define ENC28J60_WRITE_BUF_MEM 0x7A
+#define ENC28J60_BIT_FIELD_SET 0x80
+#define ENC28J60_BIT_FIELD_CLR 0xA0
+#define ENC28J60_SOFT_RESET    0xFF
+
+
+/* buffer boundaries applied to internal 8K ram
+ * entire available packet buffer space is allocated.
+ * Give TX buffer space for one full ethernet frame (~1500 bytes)
+ * receive buffer gets the rest */
+#define TXSTART_INIT           0x1A00
+#define TXEND_INIT             0x1FFF
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+#define RXSTART_INIT           0x0000
+#define RXEND_INIT             0x19FF
+
+/* maximum ethernet frame length */
+#define MAX_FRAMELEN           1518
+
+/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */
+#define ENC28J60_LAMPS_MODE    0x3476
+
+#endif