ARM: i.MX28: shift frac value in _CLK_SET_RATE
authorMatt Burtch <matt@grid-net.com>
Mon, 17 Oct 2011 16:25:45 +0000 (09:25 -0700)
committerSascha Hauer <s.hauer@pengutronix.de>
Tue, 25 Oct 2011 09:17:44 +0000 (11:17 +0200)
Noticed when setting SSP0 in clk_set_rate, _CLK_SET_RATE attempts to
reset the clock divider for the SSP0 parent clock, in this case
IO0FRAC. Bits 24-29 of HW_CLKCTRL_FRAC0 are cleared correctly, but
when the new frac value is written the value isn't shifted up to write
the correct bit-field.  This results in IO0FRAC being set to 0 and
CPUFRAC being corrupted.

This should occur when writing IO1FRAC, EMIFRAC in HW_CLKCTRL_FRAC0
and GPMIFRAC, HSADCFRAC in HW_CLKCTRL_FRAC1.

Tested on custom i.MX28 board with SSP0 SPI driver.

Signed-off-by: Matt Burtch <matt@grid-net.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/arm/mach-mxs/clock-mx28.c

index 5dcc59d5b9ec9feab991fc34302273702388b21e..ba532279d1a197d7b5e5ead07c10f55dcfc2cb3c 100644 (file)
@@ -349,7 +349,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)             \
                                                                        \
                reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
                reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC;                   \
-               reg |= frac;                                            \
+               reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC;            \
                __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
        }                                                               \
                                                                        \