Cycle counter is described by a "type" value 0xff and does
not require any other settings.
+The driver also provides a "cpumask" sysfs attribute, which contains
+a single CPU ID, of the processor which will be used to handle all
+the CCN PMU events. It is recommended that the user space tools
+request the events on this processor (if not, the perf_event->cpu value
+will be overwritten anyway). In case of this processor being offlined,
+the events are migrated to another one and the attribute is updated.
+
Example of perf tool use:
/ # perf list | grep ccn
ccn/cycles/ [Kernel PMU event]
<...>
- ccn/xp_valid_flit/ [Kernel PMU event]
+ ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/ [Kernel PMU event]
<...>
-/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
sleep 1
The driver does not support sampling, therefore "perf record" will
-not work. Also notice that only single cpu is being selected
-("-C 0") - this is because perf framework does not support
-"non-CPU related" counters (yet?) so system-wide session ("-a")
-would try (and in most cases fail) to set up the same event
-per each CPU.
+not work. Per-task (without "-a") perf sessions are not supported.
--- /dev/null
+ STM32 ARM Linux Overview
+ ========================
+
+Introduction
+------------
+
+ The STMicroelectronics family of Cortex-M based MCUs are supported by the
+ 'STM32' platform of ARM Linux. Currently only the STM32F429 is supported.
+
+
+Configuration
+-------------
+
+ A generic configuration is provided for STM32 family, and can be used as the
+ default by
+ make stm32_defconfig
+
+Layout
+------
+
+ All the files for multiple machine families are located in the platform code
+ contained in arch/arm/mach-stm32
+
+ There is a generic board board-dt.c in the mach folder which support
+ Flattened Device Tree, which means, it works with any compatible board with
+ Device Trees.
+
+
+Document Author
+---------------
+
+ Maxime Coquelin <mcoquelin.stm32@gmail.com>
--- /dev/null
+ STM32F429 Overview
+ ==================
+
+ Introduction
+ ------------
+ The STM32F429 is a Cortex-M4 MCU aimed at various applications.
+ It features:
+ - ARM Cortex-M4 up to 180MHz with FPU
+ - 2MB internal Flash Memory
+ - External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND)
+ - I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers
+ - LCD controller & Camera interface
+ - Cryptographic processor
+
+ Resources
+ ---------
+ Datasheet and reference manual are publicly available on ST website:
+ - http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013
+
+ Document Author
+ ---------------
+ Maxime Coquelin <mcoquelin.stm32@gmail.com>
--- /dev/null
+Altera SOCFPGA SDRAM Controller
+
+Required properties:
+- compatible : Should contain "altr,sdr-ctl" and "syscon".
+ syscon is required by the Altera SOCFPGA SDRAM EDAC.
+- reg : Should contain 1 register range (address and length)
+
+Example:
+ sdr: sdr@ffc25000 {
+ compatible = "altr,sdr-ctl", "syscon";
+ reg = <0xffc25000 0x1000>;
+ };
};
};
+
+ARM Versatile Express Boards
+-----------------------------
+For details on the device tree bindings for ARM Versatile Express boards
+please consult the vexpress.txt file in the same directory as this file.
+
+ARM Juno Boards
+----------------
+The Juno boards are targeting development for AArch64 systems. The first
+iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64,
+with the second iteration, Juno r1, mainly aimed at development of PCIe
+based systems. Juno r1 also has support for AXI masters placed on the TLX
+connectors to join the coherency domain.
+
+Juno boards are described in a similar way to ARM Versatile Express boards,
+with the motherboard part of the hardware being described in a separate file
+to highlight the fact that is part of the support infrastructure for the SoC.
+Juno device tree bindings also share the Versatile Express bindings as
+described under the RS1 memory mapping.
+
+Required properties (in root node):
+ compatible = "arm,juno"; /* For Juno r0 board */
+ compatible = "arm,juno-r1"; /* For Juno r1 board */
+
+Required nodes:
+The description for the board must include:
+ - a "psci" node describing the boot method used for the secondary CPUs.
+ A detailed description of the bindings used for "psci" nodes is present
+ in the psci.txt file.
+ - a "cpus" node describing the available cores and their associated
+ "enable-method"s. For more details see cpus.txt file.
+
+Example:
+
+/dts-v1/;
+/ {
+ model = "ARM Juno development board (r0)";
+ compatible = "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ .....
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ .....
+ };
+
+};
};
RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
"atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
"atmel,sama5d3-ddramc",
Broadcom BCM2835 device tree bindings
-------------------------------------------
-Boards with the BCM2835 SoC shall have the following properties:
+Raspberry Pi Model A
+Required root node properties:
+compatible = "raspberrypi,model-a", "brcm,bcm2835";
-Required root node property:
+Raspberry Pi Model A+
+Required root node properties:
+compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+Raspberry Pi Model B
+Required root node properties:
+compatible = "raspberrypi,model-b", "brcm,bcm2835";
+
+Raspberry Pi Model B (no P5)
+early model B with I2C0 rather than I2C1 routed to the expansion header
+Required root node properties:
+compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835";
+
+Raspberry Pi Model B rev2
+Required root node properties:
+compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+
+Raspberry Pi Model B+
+Required root node properties:
+compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+
+Raspberry Pi Compute Module
+Required root node properties:
+compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+
+Generic BCM2835 board
+Required root node properties:
compatible = "brcm,bcm2835";
Required root node property:
compatible: should be "brcm,bcm63138"
+
+An optional Boot lookup table Device Tree node is required for secondary CPU
+initialization as well as a 'resets' phandle to the correct PMB controller as
+defined in reset/brcm,bcm63138-pmb.txt for this secondary CPU, and an
+'enable-method' property.
+
+Required properties for the Boot lookup table node:
+- compatible: should be "brcm,bcm63138-bootlut"
+- reg: register base address and length for the Boot Lookup table
+
+Optional properties for the primary CPU node:
+- enable-method: should be "brcm,bcm63138"
+
+Optional properties for the secondary CPU node:
+- enable-method: should be "brcm,bcm63138"
+- resets: phandle to the relevant PMB controller, one integer indicating the internal
+ bus number, and a second integer indicating the address of the CPU in the PMB
+ internal bus number.
+
+Example:
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cotex-a9";
+ reg = <0>;
+ ...
+ enable-method = "brcm,bcm63138";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ ...
+ enable-method = "brcm,bcm63138";
+ resets = <&pmb0 4 1>;
+ };
+ };
+
+ bootlut: bootlut@8000 {
+ compatible = "brcm,bcm63138-bootlut";
+ reg = <0x8000 0x50>;
+ };
+
+=======
+reboot
+------
+Two nodes are required for software reboot: a timer node and a syscon-reboot node.
+
+Timer node:
+
+- compatible: Must be "brcm,bcm6328-timer", "syscon"
+- reg: Register base address and length
+
+Syscon reboot node:
+
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
+detailed list of properties, the two values defined below are specific to the
+BCM6328-style timer:
+
+- offset: Should be 0x34 to denote the offset of the TIMER_WD_TIMER_RESET register
+ from the beginning of the TIMER block
+- mask: Should be 1 for the SoftRst bit.
+
+Example:
+
+ timer: timer@80 {
+ compatible = "brcm,bcm6328-timer", "syscon";
+ reg = <0x80 0x3c>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&timer>;
+ offset = <0x34>;
+ mask = <0x1>;
+ };
- compatible
Usage: required
Value type: <string>
- Definition: must be set to
+ Definition: must contain one of the following:
"arm,cci-400"
+ "arm,cci-500"
- reg
Usage: required
"arm,cci-400-pmu,r1"
"arm,cci-400-pmu" - DEPRECATED, permitted only where OS has
secure acces to CCI registers
+ "arm,cci-500-pmu,r0"
- reg:
Usage: required
Value type: Integer cells. A register entry, expressed
# On ARM 32-bit systems this property is optional and
can be one of:
"allwinner,sun6i-a31"
+ "allwinner,sun8i-a23"
"arm,psci"
"brcm,brahma-b15"
"marvell,armada-375-smp"
domains.
- clock-names: The following clocks can be specified:
- oscclk: Oscillator clock.
- - pclkN, clkN: Pairs of parent of input clock and input clock to the
- devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
- are supported currently.
+ - clkN: Input clocks to the devices in this power domain. These clocks
+ will be reparented to oscclk before swithing power domain off.
+ Their original parent will be brought back after turning on
+ the domain. Maximum of 4 clocks (N = 0 to 3) are supported.
- asbN: Clocks required by asynchronous bridges (ASB) present in
the power domain. These clock should be enabled during power
domain on/off operations.
For the Vybrid SoC familiy all variants with DDR controller are supported,
which is the VF5xx and VF6xx series. Out of historical reasons, in most
places the kernel uses vf610 to refer to the whole familiy.
+The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
+core support.
Required root node compatible property (one of them):
- compatible = "fsl,vf500";
- compatible = "fsl,vf510";
- compatible = "fsl,vf600";
- compatible = "fsl,vf610";
+ - compatible = "fsl,vf610m4";
Freescale LS1021A Platform Device Tree Bindings
------------------------------------------------
Hisilicon Platforms Device Tree Bindings
----------------------------------------------------
+Hi6220 SoC
+Required root node properties:
+ - compatible = "hisilicon,hi6220";
Hi4511 Board
Required root node properties:
Required root node properties:
- compatible = "hisilicon,hip01-ca9x2";
+HiKey Board
+Required root node properties:
+ - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
Hisilicon system controller
reboot-offset = <0x4>;
};
+-----------------------------------------------------------------------
+Hisilicon Hi6220 system controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sysctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+ under this controller and this property must be present.
+
+Hisilicon designs this controller as one of the system controllers,
+its main functions are the same as Hisilicon system controller, but
+the register offset of some core modules are different.
+
+Example:
+ /*for Hi6220*/
+ sys_ctrl: sys_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+
+Hisilicon Hi6220 Power Always ON domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-aoctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+ under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the power always
+on domain for mobile platform.
+
+Example:
+ /*for Hi6220*/
+ ao_ctrl: ao_ctrl@f7800000 {
+ compatible = "hisilicon,hi6220-aoctrl", "syscon";
+ reg = <0x0 0xf7800000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+
+Hisilicon Hi6220 Media domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-mediactrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+ under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the multimedia
+domain(e.g. codec, G3D ...) for mobile platform.
+
+Example:
+ /*for Hi6220*/
+ media_ctrl: media_ctrl@f4410000 {
+ compatible = "hisilicon,hi6220-mediactrl", "syscon";
+ reg = <0x0 0xf4410000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+
+Hisilicon Hi6220 Power Management domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-pmctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, some clock registers are define
+ under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the power management
+domain for mobile platform.
+
+Example:
+ /*for Hi6220*/
+ pm_ctrl: pm_ctrl@f7032000 {
+ compatible = "hisilicon,hi6220-pmctrl", "syscon";
+ reg = <0x0 0xf7032000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
-----------------------------------------------------------------------
Hisilicon HiP01 system controller
Marvell Berlin SoC Family Device Tree Bindings
---------------------------------------------------------------
+Work in progress statement:
+
+Device tree files and bindings applying to Marvell Berlin SoCs and boards are
+considered "unstable". Any Marvell Berlin device tree binding may change at any
+time. Be sure to use a device tree binary and a kernel image generated from the
+same source tree.
+
+Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+stable binding/ABI.
+
+---------------------------------------------------------------
+
Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
shall have the following properties:
different functions which are described below.
Required properties:
-- compatible: shall be one of
- "marvell,berlin2-chip-ctrl" for BG2
- "marvell,berlin2cd-chip-ctrl" for BG2CD
- "marvell,berlin2q-chip-ctrl" for BG2Q
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
- reg: address and length of following register sets for
BG2/BG2CD: chip control register set
BG2Q: chip control register set and cpu pll registers
individual registers dealing with pinmux, padmux, and reset.
Required properties:
-- compatible: should be one of
- "marvell,berlin2-system-ctrl" for BG2
- "marvell,berlin2cd-system-ctrl" for BG2CD
- "marvell,berlin2q-system-ctrl" for BG2Q
+- compatible:
+ * the first and second values must be:
+ "simple-mfd", "syscon"
- reg: address and length of the system control register set
-* Clock provider binding
-
-As clock related registers are spread among the chip control registers, the
-chip control node also provides the clocks. Marvell Berlin2 (BG2, BG2CD, BG2Q)
-SoCs share the same IP for PLLs and clocks, with some minor differences in
-features and register layout.
-
-Required properties:
-- #clock-cells: shall be set to 1
-- clocks: clock specifiers referencing the core clock input clocks
-- clock-names: array of strings describing the input clock specifiers above.
- Allowed clock-names for the reference clocks are
- "refclk" for the SoCs osciallator input on all SoCs,
- and SoC-specific input clocks for
- BG2/BG2CD: "video_ext0" for the external video clock input
-
-Clocks provided by core clocks shall be referenced by a clock specifier
-indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h
-for the corresponding index mapping.
-
-* Pin controller binding
-
-Pin control registers are part of both register sets, chip control and system
-control. The pins controlled are organized in groups, so no actual pin
-information is needed.
-
-A pin-controller node should contain subnodes representing the pin group
-configurations, one per function. Each subnode has the group name and the muxing
-function used.
-
-Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called
-a 'function' in the pin-controller subsystem.
-
-Required subnode-properties:
-- groups: a list of strings describing the group names.
-- function: a string describing the function used to mux the groups.
-
-* Reset controller binding
-
-A reset controller is part of the chip control registers set. The chip control
-node also provides the reset. The register set is not at the same offset between
-Berlin SoCs.
-
-Required property:
-- #reset-cells: must be set to 2
-
Example:
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- clocks = <&refclk>, <&externaldev 0>;
- clock-names = "refclk", "video_ext0";
- spi1_pmux: spi1-pmux {
- groups = "G0";
- function = "spi1";
- };
+ /* sub-device nodes */
};
sysctrl: system-controller@d000 {
- compatible = "marvell,berlin2-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
- uart0_pmux: uart0-pmux {
- groups = "GSM4";
- function = "uart0";
- };
-
- uart1_pmux: uart1-pmux {
- groups = "GSM5";
- function = "uart1";
- };
-
- uart2_pmux: uart2-pmux {
- groups = "GSM3";
- function = "uart2";
- };
+ /* sub-device nodes */
};
--- /dev/null
+* ARM Snoop Control Unit (SCU)
+
+As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided
+with a Snoop Control Unit. The register range is usually 256 (0x100)
+bytes.
+
+References:
+
+- Cortex-A9: see DDI0407E Cortex-A9 MPCore Technical Reference Manual
+ Revision r2p0
+- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
+ Revision r0p1
+
+- compatible : Should be:
+ "arm,cortex-a9-scu"
+ "arm,cortex-a5-scu"
+
+- reg : Specify the base address and the size of the SCU register window.
+
+Example:
+
+scu@a04100000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xa0410000 0x100>;
+};
--- /dev/null
+ST-Ericsson Ux500 boards
+------------------------
+
+Required properties (in root node) one of these:
+ compatible = "st-ericsson,mop500" (legacy)
+ compatible = "st-ericsson,u8500"
+
+Required node (under root node):
+
+soc: represents the system-on-chip and contains the chip
+peripherals
+
+Required property of soc node, one of these:
+ compatible = "stericsson,db8500"
+
+Required subnodes under soc node:
+
+backupram: (used for CPU spin tables and for storing data
+during retention, system won't boot without this):
+ compatible = "ste,dbx500-backupram"
+
+scu:
+ see binding for arm/scu.txt
+
+interrupt-controller:
+ see binding for arm/gic.txt
+
+timer:
+ see binding for arm/twd.txt
+
+clocks:
+ see binding for clocks/ux500.txt
+
+Example:
+
+/dts-v1/;
+
+/ {
+ model = "ST-Ericsson HREF (pre-v60) and ST UIB";
+ compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "stericsson,db8500";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ backupram@80150000 {
+ compatible = "ste,dbx500-backupram";
+ reg = <0x80150000 0x2000>;
+ };
+
+ intc: interrupt-controller@a0411000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xa0411000 0x1000>,
+ <0xa0410100 0x100>;
+ };
+
+ scu@a04100000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xa0410000 0x100>;
+ };
+
+ timer@a0410600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xa0410600 0x20>;
+ interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+ clocks = <&smp_twd_clk>;
+ };
+
+ clocks {
+ compatible = "stericsson,u8500-clks";
+
+ smp_twd_clk: smp-twd-clock {
+ #clock-cells = <0>;
+ };
+ };
+ };
+};
--- /dev/null
+ZTE platforms device tree bindings
+---------------------------------------
+
+- ZX296702 board:
+ Required root node properties:
+ - compatible = "zte,zx296702-ad1", "zte,zx296702"
+
+System management required properties:
+ - compatible = "zte,sysctrl"
+
+Low power management required properties:
+ - compatible = "zte,zx296702-pcu"
+
+Bus matrix required properties:
+ - compatible = "zte,zx-bus-matrix"
- #address-cells : shall be 1 (reg is used to encode clk id).
- clocks : shall be the master clock phandle.
e.g. clocks = <&mck>;
-- name: device tree node describing a specific system clock.
+- name: device tree node describing a specific peripheral clock.
* #clock-cells : from common clock binding; shall be set to 0.
* reg: peripheral id. See Atmel's datasheets to get a full
list of peripheral ids.
--- /dev/null
+* Hisilicon Hi6220 Clock Controller
+
+Clock control registers reside in different Hi6220 system controllers,
+please refer the following document to know more about the binding rules
+for these system controllers:
+
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+ indicate the clock controller functionality.
+
+ - "hisilicon,hi6220-aoctrl"
+ - "hisilicon,hi6220-sysctrl"
+ - "hisilicon,hi6220-mediactrl"
+ - "hisilicon,hi6220-pmctrl"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+For example:
+ sys_ctrl: sys_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>.
--- /dev/null
+* Clock bindings for Freescale i.MX7 Dual
+
+Required properties:
+- compatible: Should be "fsl,imx7d-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+for the full list of i.MX7 Dual clock IDs.
--- /dev/null
+Device Tree Clock bindings for Marvell Berlin
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Clock related registers are spread among the chip control registers. Berlin
+clock node should be a sub-node of the chip controller node. Marvell Berlin2
+(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some
+minor differences in features and register layout.
+
+Required properties:
+- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk"
+- #clock-cells: must be 1
+- clocks: must be the input parent clock phandle
+- clock-names: name of the input parent clock
+ Allowed clock-names for the reference clocks are
+ "refclk" for the SoCs oscillator input on all SoCs,
+ and SoC-specific input clocks for
+ BG2/BG2CD: "video_ext0" for the external video clock input
+
+
+Example:
+
+chip_clk: clock {
+ compatible = "marvell,berlin2q-clk";
+
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+};
--- /dev/null
+Device Tree Clock bindings for ZTE zx296702
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "zte,zx296702-topcrm-clk":
+ zx296702 top clock selection, divider and gating
+
+ "zte,zx296702-lsp0crpm-clk" and
+ "zte,zx296702-lsp1crpm-clk":
+ zx296702 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
+for the full list of zx296702 clock IDs.
+
+
+topclk: topcrm@0x09800000 {
+ compatible = "zte,zx296702-topcrm-clk";
+ reg = <0x09800000 0x1000>;
+ #clock-cells = <1>;
+};
+
+uart0: serial@0x09405000 {
+ compatible = "zte,zx296702-uart";
+ reg = <0x09405000 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lsp1clk ZX296702_UART0_PCLK>;
+ status = "disabled";
+};
fuse@7000f800 {
compatible = "nvidia,tegra20-efuse";
- reg = <0x7000F800 0x400>,
+ reg = <0x7000f800 0x400>,
<0x70000000 0x400>;
clocks = <&tegra_car TEGRA20_CLK_FUSE>;
clock-names = "fuse";
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
- touchscreen-max-x = <4096>;
- touchscreen-max-y = <4096>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
NVIDIA Tegra Memory Controller device tree bindings
===================================================
+memory-controller node
+----------------------
+
Required properties:
- compatible: Should be "nvidia,tegra<chip>-mc"
- reg: Physical base address and length of the controller's registers.
This device implements an IOMMU that complies with the generic IOMMU binding.
See ../iommu/iommu.txt for details.
-Example:
---------
+emc-timings subnode
+-------------------
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
+register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
+
+timing subnode
+--------------
+
+Each "emc-timings" node should contain a subnode for every supported EMC clock rate.
+
+Required properties for timing nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC
+(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be
+specified, according to the board documentation:
+
+ MC_EMEM_ARB_CFG
+ MC_EMEM_ARB_OUTSTANDING_REQ
+ MC_EMEM_ARB_TIMING_RCD
+ MC_EMEM_ARB_TIMING_RP
+ MC_EMEM_ARB_TIMING_RC
+ MC_EMEM_ARB_TIMING_RAS
+ MC_EMEM_ARB_TIMING_FAW
+ MC_EMEM_ARB_TIMING_RRD
+ MC_EMEM_ARB_TIMING_RAP2PRE
+ MC_EMEM_ARB_TIMING_WAP2PRE
+ MC_EMEM_ARB_TIMING_R2R
+ MC_EMEM_ARB_TIMING_W2W
+ MC_EMEM_ARB_TIMING_R2W
+ MC_EMEM_ARB_TIMING_W2R
+ MC_EMEM_ARB_DA_TURNS
+ MC_EMEM_ARB_DA_COVERS
+ MC_EMEM_ARB_MISC0
+ MC_EMEM_ARB_MISC1
+ MC_EMEM_ARB_RING1_THROTTLE
+Example SoC include file:
+
+/ {
mc: memory-controller@0,70019000 {
compatible = "nvidia,tegra124-mc";
reg = <0x0 0x70019000 0x0 0x1000>;
...
iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
};
+};
+
+Example board file:
+
+/ {
+ memory-controller@0,70019000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+
+ nvidia,emem-configuration = <
+ 0x40040001 /* MC_EMEM_ARB_CFG */
+ 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+ 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+ 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+ 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+ 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+ 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+ 0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+ 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+ 0x77e30303 /* MC_EMEM_ARB_MISC0 */
+ 0x70000f03 /* MC_EMEM_ARB_MISC1 */
+ 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+ >;
+ };
+ };
+ };
+};
--- /dev/null
+NVIDIA Tegra124 SoC EMC (external memory controller)
+====================================================
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-emc".
+- reg : physical base address and length of the controller's registers.
+- nvidia,memory-controller : phandle of the MC driver.
+
+The node should contain a "emc-timings" subnode for each supported RAM type
+(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
+being its RAM_CODE.
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
+used for.
+
+Each "emc-timings" node should contain a "timing" subnode for every supported
+EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
+their unit address.
+
+Required properties for "timing" nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- The following properties contain EMC timing characterization values
+(specified in the board documentation) :
+ - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
+ - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
+ - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
+ - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
+ - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
+ - nvidia,emc-cfg : EMC_CFG
+ - nvidia,emc-cfg-2 : EMC_CFG_2
+ - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
+ - nvidia,emc-mode-1 : Mode Register 1
+ - nvidia,emc-mode-2 : Mode Register 2
+ - nvidia,emc-mode-4 : Mode Register 4
+ - nvidia,emc-mode-reset : Mode Register 0
+ - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
+ - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
+ - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
+ - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
+ - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
+- nvidia,emc-configuration : EMC timing characterization data. These are the
+registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
+be specified, according to the board documentation:
+
+ EMC_RC
+ EMC_RFC
+ EMC_RFC_SLR
+ EMC_RAS
+ EMC_RP
+ EMC_R2W
+ EMC_W2R
+ EMC_R2P
+ EMC_W2P
+ EMC_RD_RCD
+ EMC_WR_RCD
+ EMC_RRD
+ EMC_REXT
+ EMC_WEXT
+ EMC_WDV
+ EMC_WDV_MASK
+ EMC_QUSE
+ EMC_QUSE_WIDTH
+ EMC_IBDLY
+ EMC_EINPUT
+ EMC_EINPUT_DURATION
+ EMC_PUTERM_EXTRA
+ EMC_PUTERM_WIDTH
+ EMC_PUTERM_ADJ
+ EMC_CDB_CNTL_1
+ EMC_CDB_CNTL_2
+ EMC_CDB_CNTL_3
+ EMC_QRST
+ EMC_QSAFE
+ EMC_RDV
+ EMC_RDV_MASK
+ EMC_REFRESH
+ EMC_BURST_REFRESH_NUM
+ EMC_PRE_REFRESH_REQ_CNT
+ EMC_PDEX2WR
+ EMC_PDEX2RD
+ EMC_PCHG2PDEN
+ EMC_ACT2PDEN
+ EMC_AR2PDEN
+ EMC_RW2PDEN
+ EMC_TXSR
+ EMC_TXSRDLL
+ EMC_TCKE
+ EMC_TCKESR
+ EMC_TPD
+ EMC_TFAW
+ EMC_TRPAB
+ EMC_TCLKSTABLE
+ EMC_TCLKSTOP
+ EMC_TREFBW
+ EMC_FBIO_CFG6
+ EMC_ODT_WRITE
+ EMC_ODT_READ
+ EMC_FBIO_CFG5
+ EMC_CFG_DIG_DLL
+ EMC_CFG_DIG_DLL_PERIOD
+ EMC_DLL_XFORM_DQS0
+ EMC_DLL_XFORM_DQS1
+ EMC_DLL_XFORM_DQS2
+ EMC_DLL_XFORM_DQS3
+ EMC_DLL_XFORM_DQS4
+ EMC_DLL_XFORM_DQS5
+ EMC_DLL_XFORM_DQS6
+ EMC_DLL_XFORM_DQS7
+ EMC_DLL_XFORM_DQS8
+ EMC_DLL_XFORM_DQS9
+ EMC_DLL_XFORM_DQS10
+ EMC_DLL_XFORM_DQS11
+ EMC_DLL_XFORM_DQS12
+ EMC_DLL_XFORM_DQS13
+ EMC_DLL_XFORM_DQS14
+ EMC_DLL_XFORM_DQS15
+ EMC_DLL_XFORM_QUSE0
+ EMC_DLL_XFORM_QUSE1
+ EMC_DLL_XFORM_QUSE2
+ EMC_DLL_XFORM_QUSE3
+ EMC_DLL_XFORM_QUSE4
+ EMC_DLL_XFORM_QUSE5
+ EMC_DLL_XFORM_QUSE6
+ EMC_DLL_XFORM_QUSE7
+ EMC_DLL_XFORM_ADDR0
+ EMC_DLL_XFORM_ADDR1
+ EMC_DLL_XFORM_ADDR2
+ EMC_DLL_XFORM_ADDR3
+ EMC_DLL_XFORM_ADDR4
+ EMC_DLL_XFORM_ADDR5
+ EMC_DLL_XFORM_QUSE8
+ EMC_DLL_XFORM_QUSE9
+ EMC_DLL_XFORM_QUSE10
+ EMC_DLL_XFORM_QUSE11
+ EMC_DLL_XFORM_QUSE12
+ EMC_DLL_XFORM_QUSE13
+ EMC_DLL_XFORM_QUSE14
+ EMC_DLL_XFORM_QUSE15
+ EMC_DLI_TRIM_TXDQS0
+ EMC_DLI_TRIM_TXDQS1
+ EMC_DLI_TRIM_TXDQS2
+ EMC_DLI_TRIM_TXDQS3
+ EMC_DLI_TRIM_TXDQS4
+ EMC_DLI_TRIM_TXDQS5
+ EMC_DLI_TRIM_TXDQS6
+ EMC_DLI_TRIM_TXDQS7
+ EMC_DLI_TRIM_TXDQS8
+ EMC_DLI_TRIM_TXDQS9
+ EMC_DLI_TRIM_TXDQS10
+ EMC_DLI_TRIM_TXDQS11
+ EMC_DLI_TRIM_TXDQS12
+ EMC_DLI_TRIM_TXDQS13
+ EMC_DLI_TRIM_TXDQS14
+ EMC_DLI_TRIM_TXDQS15
+ EMC_DLL_XFORM_DQ0
+ EMC_DLL_XFORM_DQ1
+ EMC_DLL_XFORM_DQ2
+ EMC_DLL_XFORM_DQ3
+ EMC_DLL_XFORM_DQ4
+ EMC_DLL_XFORM_DQ5
+ EMC_DLL_XFORM_DQ6
+ EMC_DLL_XFORM_DQ7
+ EMC_XM2CMDPADCTRL
+ EMC_XM2CMDPADCTRL4
+ EMC_XM2CMDPADCTRL5
+ EMC_XM2DQPADCTRL2
+ EMC_XM2DQPADCTRL3
+ EMC_XM2CLKPADCTRL
+ EMC_XM2CLKPADCTRL2
+ EMC_XM2COMPPADCTRL
+ EMC_XM2VTTGENPADCTRL
+ EMC_XM2VTTGENPADCTRL2
+ EMC_XM2VTTGENPADCTRL3
+ EMC_XM2DQSPADCTRL3
+ EMC_XM2DQSPADCTRL4
+ EMC_XM2DQSPADCTRL5
+ EMC_XM2DQSPADCTRL6
+ EMC_DSR_VTTGEN_DRV
+ EMC_TXDSRVTTGEN
+ EMC_FBIO_SPARE
+ EMC_ZCAL_WAIT_CNT
+ EMC_MRS_WAIT_CNT2
+ EMC_CTT
+ EMC_CTT_DURATION
+ EMC_CFG_PIPE
+ EMC_DYN_SELF_REF_CONTROL
+ EMC_QPOP
+
+Example SoC include file:
+
+/ {
+ emc@0,7001b000 {
+ compatible = "nvidia,tegra124-emc";
+ reg = <0x0 0x7001b000 0x0 0x1000>;
+
+ nvidia,memory-controller = <&mc>;
+ };
+};
+
+Example board file:
+
+/ {
+ emc@0,7001b000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+
+ nvidia,emc-zcal-cnt-long = <0x00000042>;
+ nvidia,emc-auto-cal-interval = <0x001fffff>;
+ nvidia,emc-ctt-term-ctrl = <0x00000802>;
+ nvidia,emc-cfg = <0x73240000>;
+ nvidia,emc-cfg-2 = <0x000008c5>;
+ nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+ nvidia,emc-bgbias-ctl0 = <0x00000008>;
+ nvidia,emc-auto-cal-config = <0xa1430000>;
+ nvidia,emc-auto-cal-config2 = <0x00000000>;
+ nvidia,emc-auto-cal-config3 = <0x00000000>;
+ nvidia,emc-mode-reset = <0x80001221>;
+ nvidia,emc-mode-1 = <0x80100003>;
+ nvidia,emc-mode-2 = <0x80200008>;
+ nvidia,emc-mode-4 = <0x00000000>;
+
+ nvidia,emc-configuration = <
+ 0x00000000 /* EMC_RC */
+ 0x00000003 /* EMC_RFC */
+ 0x00000000 /* EMC_RFC_SLR */
+ 0x00000000 /* EMC_RAS */
+ 0x00000000 /* EMC_RP */
+ 0x00000004 /* EMC_R2W */
+ 0x0000000a /* EMC_W2R */
+ 0x00000003 /* EMC_R2P */
+ 0x0000000b /* EMC_W2P */
+ 0x00000000 /* EMC_RD_RCD */
+ 0x00000000 /* EMC_WR_RCD */
+ 0x00000003 /* EMC_RRD */
+ 0x00000003 /* EMC_REXT */
+ 0x00000000 /* EMC_WEXT */
+ 0x00000006 /* EMC_WDV */
+ 0x00000006 /* EMC_WDV_MASK */
+ 0x00000006 /* EMC_QUSE */
+ 0x00000002 /* EMC_QUSE_WIDTH */
+ 0x00000000 /* EMC_IBDLY */
+ 0x00000005 /* EMC_EINPUT */
+ 0x00000005 /* EMC_EINPUT_DURATION */
+ 0x00010000 /* EMC_PUTERM_EXTRA */
+ 0x00000003 /* EMC_PUTERM_WIDTH */
+ 0x00000000 /* EMC_PUTERM_ADJ */
+ 0x00000000 /* EMC_CDB_CNTL_1 */
+ 0x00000000 /* EMC_CDB_CNTL_2 */
+ 0x00000000 /* EMC_CDB_CNTL_3 */
+ 0x00000004 /* EMC_QRST */
+ 0x0000000c /* EMC_QSAFE */
+ 0x0000000d /* EMC_RDV */
+ 0x0000000f /* EMC_RDV_MASK */
+ 0x00000060 /* EMC_REFRESH */
+ 0x00000000 /* EMC_BURST_REFRESH_NUM */
+ 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+ 0x00000002 /* EMC_PDEX2WR */
+ 0x00000002 /* EMC_PDEX2RD */
+ 0x00000001 /* EMC_PCHG2PDEN */
+ 0x00000000 /* EMC_ACT2PDEN */
+ 0x00000007 /* EMC_AR2PDEN */
+ 0x0000000f /* EMC_RW2PDEN */
+ 0x00000005 /* EMC_TXSR */
+ 0x00000005 /* EMC_TXSRDLL */
+ 0x00000004 /* EMC_TCKE */
+ 0x00000005 /* EMC_TCKESR */
+ 0x00000004 /* EMC_TPD */
+ 0x00000000 /* EMC_TFAW */
+ 0x00000000 /* EMC_TRPAB */
+ 0x00000005 /* EMC_TCLKSTABLE */
+ 0x00000005 /* EMC_TCLKSTOP */
+ 0x00000064 /* EMC_TREFBW */
+ 0x00000000 /* EMC_FBIO_CFG6 */
+ 0x00000000 /* EMC_ODT_WRITE */
+ 0x00000000 /* EMC_ODT_READ */
+ 0x106aa298 /* EMC_FBIO_CFG5 */
+ 0x002c00a0 /* EMC_CFG_DIG_DLL */
+ 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+ 0x00064000 /* EMC_DLL_XFORM_DQS0 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS1 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS2 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS3 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS4 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS5 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS6 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS7 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS8 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS9 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS10 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS11 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS12 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS13 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS14 */
+ 0x00064000 /* EMC_DLL_XFORM_DQS15 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+ 0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+ 0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+ 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+ 0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+ 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+ 0x10000280 /* EMC_XM2CMDPADCTRL */
+ 0x00000000 /* EMC_XM2CMDPADCTRL4 */
+ 0x00111111 /* EMC_XM2CMDPADCTRL5 */
+ 0x00000000 /* EMC_XM2DQPADCTRL2 */
+ 0x00000000 /* EMC_XM2DQPADCTRL3 */
+ 0x77ffc081 /* EMC_XM2CLKPADCTRL */
+ 0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+ 0x81f1f108 /* EMC_XM2COMPPADCTRL */
+ 0x07070004 /* EMC_XM2VTTGENPADCTRL */
+ 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+ 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL3 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL4 */
+ 0x00514514 /* EMC_XM2DQSPADCTRL5 */
+ 0x51451400 /* EMC_XM2DQSPADCTRL6 */
+ 0x0000003f /* EMC_DSR_VTTGEN_DRV */
+ 0x00000007 /* EMC_TXDSRVTTGEN */
+ 0x00000000 /* EMC_FBIO_SPARE */
+ 0x00000042 /* EMC_ZCAL_WAIT_CNT */
+ 0x000e000e /* EMC_MRS_WAIT_CNT2 */
+ 0x00000000 /* EMC_CTT */
+ 0x00000003 /* EMC_CTT_DURATION */
+ 0x0000f2f3 /* EMC_CFG_PIPE */
+ 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+ 0x0000000a /* EMC_QPOP */
+ >;
+ };
+ };
+ };
+};
--- /dev/null
+Multi-Function Devices (MFD)
+
+These devices comprise a nexus for heterogeneous hardware blocks containing
+more than one non-unique yet varying hardware functionality.
+
+A typical MFD can be:
+
+- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
+ Integrated Circuit) that is manufactured in a lower technology node (rough
+ silicon) that handles analog drivers for things like audio amplifiers, LED
+ drivers, level shifters, PHY (physical interfaces to things like USB or
+ ethernet), regulators etc.
+
+- A range of memory registers containing "miscellaneous system registers" also
+ known as a system controller "syscon" or any other memory range containing a
+ mix of unrelated hardware devices.
+
+Optional properties:
+
+- compatible : "simple-mfd" - this signifies that the operating system should
+ consider all subnodes of the MFD device as separate devices akin to how
+ "simple-bus" inidicates when to see subnodes as children for a simple
+ memory-mapped bus. For more complex devices, when the nexus driver has to
+ probe registers to figure out what child devices exist etc, this should not
+ be used. In the latter case the child devices will be determined by the
+ operating system.
+
+Example:
+
+foo@1000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x01000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "myled";
+ default-state = "on";
+ };
+};
The second entry gives the physical address and length of the
registers indicating the strapping options.
+Optional properties:
+- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
- }
+ };
};
--- /dev/null
+* Pin-controller driver for the Marvell Berlin SoCs
+
+Pin control registers are part of both chip controller and system
+controller register sets. Pin controller nodes should be a sub-node of
+either the chip controller or system controller node. The pins
+controlled are organized in groups, so no actual pin information is
+needed.
+
+A pin-controller node should contain subnodes representing the pin group
+configurations, one per function. Each subnode has the group name and
+the muxing function used.
+
+Be aware the Marvell Berlin datasheets use the keyword 'mode' for what
+is called a 'function' in the pin-controller subsystem.
+
+Required properties:
+- compatible: should be one of:
+ "marvell,berlin2-soc-pinctrl",
+ "marvell,berlin2-system-pinctrl",
+ "marvell,berlin2cd-soc-pinctrl",
+ "marvell,berlin2cd-system-pinctrl",
+ "marvell,berlin2q-soc-pinctrl",
+ "marvell,berlin2q-system-pinctrl"
+
+Required subnode-properties:
+- groups: a list of strings describing the group names.
+- function: a string describing the function used to mux the groups.
+
+Example:
+
+sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-system-pinctrl";
+
+ uart0_pmux: uart0-pmux {
+ groups = "GSM12";
+ function = "uart0";
+ };
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pmux>;
+ pinctrl-names = "default";
+};
--- /dev/null
+* Freescale i.MX7 Dual IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx7d-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_PUS_100K_DOWN (0 << 5)
+PAD_CTL_PUS_5K_UP (1 << 5)
+PAD_CTL_PUS_47K_UP (2 << 5)
+PAD_CTL_PUS_100K_UP (3 << 5)
+PAD_CTL_PUE (1 << 4)
+PAD_CTL_HYS (1 << 3)
+PAD_CTL_SRE_SLOW (1 << 2)
+PAD_CTL_SRE_FAST (0 << 2)
+PAD_CTL_DSE_X1 (0 << 0)
+PAD_CTL_DSE_X2 (1 << 0)
+PAD_CTL_DSE_X3 (2 << 0)
+PAD_CTL_DSE_X4 (3 << 0)
--- /dev/null
+Marvell Berlin reset controller
+===============================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller node must be a sub-node of the chip controller
+node on Berlin SoCs.
+
+Required properties:
+- compatible: should be "marvell,berlin2-reset"
+- #reset-cells: must be set to 2
+
+Example:
+
+chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
+};
+
+&usb_phy0 {
+ resets = <&chip_rst 0x104 12>;
+};
--- /dev/null
+Broadcom BCM63138 Processor Monitor Bus binding
+===============================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Require properties:
+
+- compatible: must be "brcm,bcm63138-pmb"
+- reg: base register address and size for this bus controller
+- #reset-cells: must be 2 first cell is the address within the bus instance designated
+ by the phandle, and the second is the number of zones for this peripheral
+
+Example:
+ pmb0: reset-controller@4800c0 {
+ compatible = "brcm,bcm63138-pmb";
+ reg = <0x4800c0 0x10>;
+ #reset-cells = <2>;
+ };
* "samsung,s3c2416-rtc" - for controllers compatible with s3c2416 rtc.
* "samsung,s3c2443-rtc" - for controllers compatible with s3c2443 rtc.
* "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
- * "samsung,exynos3250-rtc" - for controllers compatible with exynos3250 rtc.
+ * "samsung,exynos3250-rtc" - (deprecated) for controllers compatible with
+ exynos3250 rtc (use "samsung,s3c6410-rtc").
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: Two interrupt numbers to the cpu should be specified. First
* ARM AMBA Primecell PL011 serial UART
Required properties:
-- compatible: must be "arm,primecell", "arm,pl011"
+- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
- reg: exactly one register range with length 0x1000
- interrupts: exactly one interrupt specifier
--- /dev/null
+Allwinnner SoC SRAM controllers
+-----------------------------------------------------
+
+The SRAM controller found on most Allwinner devices is represented by
+a regular node for the SRAM controller itself, with sub-nodes
+reprensenting the SRAM handled by the SRAM controller.
+
+Controller Node
+---------------
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-sram-controller"
+- reg : sram controller register offset + length
+
+SRAM nodes
+----------
+
+Each SRAM is described using the mmio-sram bindings documented in
+Documentation/devicetree/bindings/misc/sram.txt
+
+Each SRAM will have SRAM sections that are going to be handled by the
+SRAM controller as subnodes. These sections are represented following
+once again the representation described in the mmio-sram binding.
+
+The valid sections compatible are:
+ - allwinner,sun4i-a10-sram-a3-a4
+ - allwinner,sun4i-a10-sram-d
+
+Devices using SRAM sections
+---------------------------
+
+Some devices need to request to the SRAM controller to map an SRAM for
+their exclusive use.
+
+The relationship between such a device and an SRAM section is
+expressed through the allwinner,sram property, that will take a
+phandle and an argument.
+
+This valid values for this argument are:
+ - 0: CPU
+ - 1: Device
+
+Example
+-------
+sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a: sram@00000000 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0xc000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00000000 0xc000>;
+
+ emac_sram: sram-section@8000 {
+ compatible = "allwinner,sun4i-a10-sram-a3-a4";
+ reg = <0x8000 0x4000>;
+ status = "disabled";
+ };
+ };
+};
+
+emac: ethernet@01c0b000 {
+ compatible = "allwinner,sun4i-a10-emac";
+ ...
+
+ allwinner,sram = <&emac_sram 1>;
+};
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- interrupts : A list of 3 interrupts; one per timer channel.
- clocks: phandle to the source clock
+Optional properties:
+- timer-width: Bit width of the timer, necessary if not 16.
+
Example:
ttc0: ttc0@f8001000 {
compatible = "cdns,ttc";
reg = <0xF8001000 0x1000>;
clocks = <&cpu_clk 3>;
+ timer-width = <32>;
};
Required properties:
- compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ehci interrupt
+ - clocks: Should reference the peripheral, host and system clocks
+ - clock-names: Should contains two strings
+ "ohci_clk" for the peripheral clock
+ "hclk" for the host clock
+ "uhpck" for the system clock
- num-ports: Number of ports.
- atmel,vbus-gpio: If present, specifies a gpio that needs to be
activated for the bus to be powered.
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
interrupts = <20 4>;
num-ports = <2>;
};
Required properties:
- compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ehci interrupt
+ - clocks: Should reference the peripheral and the UTMI clocks
+ - clock-names: Should contains two strings
+ "ehci_clk" for the peripheral clock
+ "usb_clk" for the UTMI clock
usb1: ehci@00800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 4>;
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
};
AT91 USB device controller
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 4>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
atmel,vbus-gpio = <&pioC 5 0>;
};
"sama5d3-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
+ - clocks: Should reference the peripheral and host clocks
+ - clock-names: Should contains two strings
+ "pclk" for the peripheral clock
+ "hclk" for the host clock
- ep childnode: To specify the number of endpoints and their properties.
Optional properties:
reg = <0x00600000 0x80000
0xfff78000 0x400>;
interrupts = <27 4 0>;
+ clocks = <&utmi>, <&udphs_clk>;
+ clock-names = "hclk", "pclk";
atmel,vbus-gpio = <&pioB 19 0>;
ep0 {
capella Capella Microsystems, Inc
cavium Cavium, Inc.
cdns Cadence Design Systems Inc.
+ceva Ceva, Inc.
chipidea Chipidea, Inc
chipone ChipOne
chipspark ChipSPARK
cortina Cortina Systems, Inc.
cosmic Cosmic Circuits
crystalfontz Crystalfontz America, Inc.
+cubietech Cubietech, Ltd.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
dlg Dialog Semiconductor
dlink D-Link Corporation
dmo Data Modul AG
+ea Embedded Artists AB
ebv EBV Elektronik
edt Emerging Display Technologies
elan Elan Microelectronic Corp.
gw Gateworks Corporation
hannstar HannStar Display Corporation
haoyu Haoyu Microelectronic Co. Ltd.
+hardkernel Hardkernel Co., Ltd
himax Himax Technologies, Inc.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
+hitex Hitex Development Tools
honeywell Honeywell
hp Hewlett Packard
i2se I2SE GmbH
raidsonic RaidSonic Technology GmbH
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
+raspberrypi Raspberry Pi Foundation
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
ricoh Ricoh Co. Ltd.
stericsson ST-Ericsson
synology Synology, Inc.
tbs TBS Technologies
+tcl Toby Churchill Ltd.
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
voipac Voipac Technologies s.r.o.
+wexler Wexler
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
xlnx Xilinx
zyxel ZyXEL Communications Corp.
zarlink Zarlink Semiconductor
+zte ZTE Corp.
===========
I2C slave backends behave like standard I2C clients. So, you can instantiate
-them like described in the document 'instantiating-devices'. A quick example
-for instantiating the slave-eeprom driver from userspace:
+them as described in the document 'instantiating-devices'. A quick example for
+instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1:
- # echo 0-0064 > /sys/bus/i2c/drivers/i2c-slave-eeprom/bind
+ # echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device
Each backend should come with separate documentation to describe its specific
behaviour and setup.
By default, super page will be supported if Intel IOMMU
has the capability. With this option, super page will
not be supported.
+ ecs_off [Default Off]
+ By default, extended context tables will be supported if
+ the hardware advertises that it has support both for the
+ extended tables themselves, and also PASID support. With
+ this option set, extended tables will not be used even
+ on hardware which claims to support them.
intel_idle.max_cstate= [KNL,HW,ACPI,X86]
0 disables intel_idle and fall back on acpi_idle.
files/UDP-Lite-HOWTO.txt
o The Wireshark UDP-Lite WiKi (with capture files):
- http://wiki.wireshark.org/Lightweight_User_Datagram_Protocol
+ https://wiki.wireshark.org/Lightweight_User_Datagram_Protocol
o The Protocol Spec, RFC 3828, http://www.ietf.org/rfc/rfc3828.txt
F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-M: Shawn Guo <shawn.guo@linaro.org>
+M: Shawn Guo <shawnguo@kernel.org>
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-mxs/
F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
+F: drivers/clk/imx/
+F: include/soc/imx/
ARM/FREESCALE VYBRID ARM ARCHITECTURE
-M: Shawn Guo <shawn.guo@linaro.org>
+M: Shawn Guo <shawnguo@kernel.org>
M: Sascha Hauer <kernel@pengutronix.de>
R: Stefan Agner <stefan@agner.ch>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/LPC18XX ARCHITECTURE
+M: Joachim Eastwood <manabian@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+N: lpc18xx
+
ARM/MAGICIAN MACHINE SUPPORT
M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
S: Maintained
F: arch/arm/boot/dts/s3c*
F: arch/arm/boot/dts/exynos*
+F: arch/arm64/boot/dts/exynos/
F: arch/arm/plat-samsung/
F: arch/arm/mach-s3c24*/
F: arch/arm/mach-s3c64xx/
F: drivers/usb/host/ohci-st.c
F: drivers/ata/ahci_st.c
+ARM/STM32 ARCHITECTURE
+M: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
+N: stm32
+F: drivers/clocksource/armv7m_systick.c
+
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: drivers/rtc/rtc-coh901331.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
+ARM/UNIPHIER ARCHITECTURE
+M: Masahiro Yamada <yamada.masahiro@socionext.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-uniphier/
+N: uniphier
+
ARM/Ux500 ARM ARCHITECTURE
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-pxa/z2.c
F: arch/arm/mach-pxa/include/mach/z2.h
+ARM/ZTE ARCHITECTURE
+M: Jun Nie <jun.nie@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-zx/
+F: drivers/clk/zte/
+F: Documentation/devicetree/bindings/arm/zte.txt
+F: Documentation/devicetree/bindings/clock/zx296702-clk.txt
+
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
R: Sören Brinkmann <soren.brinkmann@xilinx.com>
F: arch/arm/mach-bcm/*brcmstb*
F: arch/arm/boot/dts/bcm7*.dts*
F: drivers/bus/brcmstb_gisb.c
+N: brcmstb
BROADCOM BMIPS MIPS ARCHITECTURE
M: Kevin Cernekee <cernekee@gmail.com>
VERSION = 4
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
select SPARSE_IRQ
select USE_OF
+config ARM_SINGLE_ARMV7M
+ bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
+ depends on !MMU
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_NVIC
+ select AUTO_ZRELADDR
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select NO_IOPORT_MAP
+ select SPARSE_IRQ
+ select USE_OF
+
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARCH_WANT_OPTIONAL_GPIOLIB
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
-config ARCH_EFM32
- bool "Energy Micro efm32"
- depends on !MMU
- select ARCH_REQUIRE_GPIOLIB
- select ARM_NVIC
- select AUTO_ZRELADDR
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7M
- select GENERIC_CLOCKEVENTS
- select NO_DMA
- select NO_IOPORT_MAP
- select SPARSE_IRQ
- select USE_OF
- help
- Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
- processors.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
+ select COMMON_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
select GENERIC_IRQ_CHIP
select HAVE_IDE
select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
select NEED_MACH_IO_H if PCCARD
select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
help
Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
source "arch/arm/mach-u300/Kconfig"
+source "arch/arm/mach-uniphier/Kconfig"
+
source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-zx/Kconfig"
+
source "arch/arm/mach-zynq/Kconfig"
+# ARMv7-M architecture
+config ARCH_EFM32
+ bool "Energy Micro efm32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+ processors.
+
+config ARCH_LPC18XX
+ bool "NXP LPC18xx/LPC43xx"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_AMBA
+ select CLKSRC_LPC32XX
+ select PINCTRL
+ help
+ Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
+ high performance microcontrollers.
+
+config ARCH_STM32
+ bool "STMicrolectronics STM32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARMV7M_SYSTICK
+ select CLKSRC_STM32
+ select RESET_CONTROLLER
+ help
+ Support for STMicroelectronics STM32 processors.
+
# Definitions to make life easier
config ARCH_ACORN
bool
# selected platforms.
config ARCH_NR_GPIO
int
- default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ
+ default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
+ ARCH_ZYNQ
default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
default 416 if ARCH_SUNXI
Say Y here if you want kernel low-level debugging support
on i.MX6SX.
+ config DEBUG_IMX7D_UART
+ bool "i.MX7D Debug UART"
+ depends on SOC_IMX7D
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX7D.
+
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
Say Y here if you want kernel low-level debugging support
on KS8695.
+ config DEBUG_LPC18XX_UART0
+ bool "Kernel low-level debugging via LPC18xx/43xx UART0"
+ depends on ARCH_LPC18XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on NXP LPC18xx/43xx UART0.
+
config DEBUG_MESON_UARTAO
bool "Kernel low-level debugging via Meson6 UARTAO"
depends on ARCH_MESON
on SA-11x0 UART ports. The kernel will check for the first
enabled UART in a sequence 3-1-2.
- config DEBUG_SOCFPGA_UART
+ config DEBUG_SOCFPGA_UART0
+ depends on ARCH_SOCFPGA
+ bool "Use SOCFPGA UART0 for low-level debug"
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
+
+ config DEBUG_SOCFPGA_UART1
depends on ARCH_SOCFPGA
- bool "Use SOCFPGA UART for low-level debug"
+ bool "Use SOCFPGA UART1 for low-level debug"
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on SOCFPGA based platforms.
+ on SOCFPGA(Arria 10) based platforms.
+
config DEBUG_SUN9I_UART0
bool "Kernel low-level debugging messages via sun9i UART0"
For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
+ config DEBUG_ZTE_ZX
+ bool "Use ZTE ZX UART"
+ select DEBUG_UART_PL01X
+ depends on ARCH_ZX
+ help
+ Say Y here if you are enabling ZTE ZX296702 SOC and need
+ debug uart support.
+
+ This option is preferred over the platform specific
+ options; the platform specific options are deprecated
+ and will be soon removed.
+
config DEBUG_LL_UART_8250
bool "Kernel low-level debugging via 8250 UART"
help
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
- DEBUG_IMX6SX_UART
+ DEBUG_IMX6SX_UART || \
+ DEBUG_IMX7D_UART
default 1
depends on ARCH_MXC
help
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
- DEBUG_IMX6SX_UART
+ DEBUG_IMX6SX_UART || \
+ DEBUG_IMX7D_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default 0x02531000 if DEBUG_KEYSTONE_UART1
default 0x03010fe0 if ARCH_RPC
default 0x07000000 if DEBUG_SUN9I_UART0
+ default 0x09405000 if DEBUG_ZTE_ZX
default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
DEBUG_VEXPRESS_UART0_CA9
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
default 0x20201000 if DEBUG_BCM2835
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
+ default 0x40081000 if DEBUG_LPC18XX_UART0
default 0x40090000 if ARCH_LPC32XX
default 0x40100000 if DEBUG_PXA_UART1
default 0x42000000 if ARCH_GEMINI
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe800000 if ARCH_IOP32X
default 0xff690000 if DEBUG_RK32_UART2
- default 0xffc02000 if DEBUG_SOCFPGA_UART
+ default 0xffc02000 if DEBUG_SOCFPGA_UART0
+ default 0xffc02100 if DEBUG_SOCFPGA_UART1
default 0xffd82340 if ARCH_IOP13XX
default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfc40ab00 if DEBUG_BRCMSTB_UART
+ default 0xfc705000 if DEBUG_ZTE_ZX
default 0xfcfe8600 if DEBUG_UART_BCM63XX
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xfd000000 if ARCH_SPEAR13XX
default 0xfeb26000 if DEBUG_RK3X_UART1
default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
default 0xfeb31000 if DEBUG_KEYSTONE_UART1
- default 0xfec02000 if DEBUG_SOCFPGA_UART
+ default 0xfec02000 if DEBUG_SOCFPGA_UART0
+ default 0xfec02100 if DEBUG_SOCFPGA_UART1
default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
bool "Use 32-bit accesses for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
depends on DEBUG_UART_8250_SHIFT >= 2
- default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
- ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \
+ default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
+ DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
+ DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
config DEBUG_UNCOMPRESS
bool
- depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
+ depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
- PLAT_SAMSUNG || ARCH_EFM32 || \
+ PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
ARCH_SHMOBILE_LEGACY
default "mach/uncompress.h"
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
machine-$(CONFIG_ARCH_KS8695) += ks8695
+machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
+machine-$(CONFIG_ARCH_STM32) += stm32
machine-$(CONFIG_ARCH_SUNXI) += sunxi
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
+machine-$(CONFIG_ARCH_UNIPHIER) += uniphier
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
+machine-$(CONFIG_ARCH_ZX) += zx
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_PLAT_SPEAR) += spear
tny_a9263.dtb \
usb_a9263.dtb \
at91-foxg20.dtb \
+ at91-kizbox.dtb \
at91sam9g20ek.dtb \
at91sam9g20ek_2mmc.dtb \
- kizbox.dtb \
tny_a9g20.dtb \
usb_a9g20.dtb \
usb_a9g20_lpw.dtb \
at91sam9n12ek.dtb \
at91sam9rlek.dtb \
at91-ariag25.dtb \
+ at91-ariettag25.dtb \
at91-cosino_mega2560.dtb \
+ at91-kizboxmini.dtb \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-kizbox2.dtb \
at91-sama5d3_xplained.dtb \
sama5d31ek.dtb \
sama5d33ek.dtb \
bcm2835-rpi-b.dtb \
bcm2835-rpi-b-plus.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4708-asus-rt-ac56u.dtb \
+ bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
+ bcm4708-smartrg-sr400ac.dtb \
bcm47081-asus-rt-n18u.dtb \
bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
+ bcm4709-asus-rt-ac87u.dtb \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r8000.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
exynos5422-odroidxu3.dtb \
+ exynos5422-odroidxu3-lite.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
+dtb-$(CONFIG_ARCH_LPC18XX) += \
+ lpc4350-hitex-eval.dtb \
+ lpc4357-ea4357-devkit.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += \
ea3250.dtb phy3250.dtb
dtb-$(CONFIG_MACH_MESON6) += \
imx53-tx53-x13x.dtb \
imx53-voipac-bsb.dtb
dtb-$(CONFIG_SOC_IMX6Q) += \
+ imx6dl-apf6dev.dtb \
imx6dl-aristainetos_4.dtb \
imx6dl-aristainetos_7.dtb \
+ imx6dl-aristainetos2_4.dtb \
+ imx6dl-aristainetos2_7.dtb \
imx6dl-cubox-i.dtb \
imx6dl-dfi-fs700-m60.dtb \
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
imx6dl-gw53xx.dtb \
imx6dl-gw54xx.dtb \
+ imx6dl-gw551x.dtb \
imx6dl-gw552x.dtb \
imx6dl-hummingboard.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
+ imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-gw53xx.dtb \
imx6q-gw5400-a.dtb \
imx6q-gw54xx.dtb \
+ imx6q-gw551x.dtb \
imx6q-gw552x.dtb \
imx6q-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+ imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
ls1021a-twr.dtb
dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \
vf610-colibri-eval-v3.dtb \
+ vf610m4-colibri.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += \
am3517-craneboard.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
+ logicpd-torpedo-37xx-devkit.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \
dtb-$(CONFIG_SOC_TI81XX) += \
dm8168-evm.dtb
dtb-$(CONFIG_SOC_AM33XX) += \
+ am335x-baltos-ir5221.dtb \
am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
+ am335x-sl50.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-nano.dtb \
sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
- socfpga_arria10_socdk.dtb \
+ socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
stih416-b2020.dtb \
stih416-b2020e.dtb \
stih418-b2199.dtb
+dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
+ sun4i-a10-gemei-g9.dtb \
+ sun4i-a10-hackberry.dtb \
+ sun4i-a10-hyundai-a7hd.dtb \
+ sun4i-a10-inet97fv2.dtb \
+ sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-mk802.dtb \
sun4i-a10-mk802ii.dtb \
- sun4i-a10-hackberry.dtb \
- sun4i-a10-hyundai-a7hd.dtb \
- sun4i-a10-inet97fv2.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-olinuxino.dtb \
- sun5i-a13-olinuxino-micro.dtb
+ sun5i-a13-olinuxino-micro.dtb \
+ sun5i-a13-utoo-p66.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
+ sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
+ sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31s-cs908.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapi.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-m3.dtb \
+ sun7i-a20-mk808c.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-micro.dtb \
- sun7i-a20-pcduino3.dtb
+ sun7i-a20-orangepi.dtb \
+ sun7i-a20-orangepi-mini.dtb \
+ sun7i-a20-pcduino3.dtb \
+ sun7i-a20-pcduino3-nano.dtb \
+ sun7i-a20-wexler-tab7200.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
+ sun8i-a23-evb.dtb \
sun8i-a23-ippo-q8h-v5.dtb \
- sun8i-a23-ippo-q8h-v1.2.dtb
+ sun8i-a23-ippo-q8h-v1.2.dtb \
+ sun8i-a33-et-q8-v1.6.dtb \
+ sun8i-a33-ga10h-v1.1.dtb \
+ sun8i-a33-sinlinx-sina33.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
- sun9i-a80-optimus.dtb
+ sun9i-a80-optimus.dtb \
+ sun9i-a80-cubieboard4.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
tegra20-iris-512.dtb \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ph1-sld3-ref.dtb \
+ uniphier-ph1-ld4-ref.dtb \
+ uniphier-ph1-pro4-ref.dtb \
+ uniphier-ph1-sld8-ref.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
versatile-pb.dtb
zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
+ armada-370-dlink-dns327l.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-385-db-ap.dtb \
+ armada-385-linksys-caiman.dtb \
+ armada-385-linksys-cobra.dtb \
armada-388-db.dtb \
armada-388-gp.dtb \
armada-388-rd.dtb
armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb
dtb-$(CONFIG_MACH_DOVE) += \
- dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
- dove-dove-db.dtb
+ dove-dove-db.dtb \
+ dove-sbc-a510.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
+dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
endif
always := $(dtb-y)
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "OnRISC Baltos iR 5221";
+ compatible = "vscom,onrisc", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ wl12xx_vmmc: fixedregulator@2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl12xx_gpio>;
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 8 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&am33xx_pinmux {
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
+ 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
+ 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
+ 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
+ 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
+ 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
+ 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
+ >;
+ };
+
+ wl12xx_gpio: pinmux_wl12xx_gpio {
+ pinctrl-single,pins = <
+ 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ >;
+ };
+
+ tps65910_pins: pinmux_tps65910_pins {
+ pinctrl-single,pins = <
+ 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
+ >;
+ };
+
+ tca6416_pins: pinmux_tca6416_pins {
+ pinctrl-single,pins = <
+ 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
+ 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+ >;
+ };
+
+ dcan1_pins: pinmux_dcan1_pins {
+ pinctrl-single,pins = <
+ 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
+ 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */
+ 0x184 0x28 /* uart1_txd, INPUT | MODE0 */
+ /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */
+ /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */
+ 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
+ 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
+ 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
+ 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
+ /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
+ /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
+ 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
+ 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
+ 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+
+
+ /* Slave 2 */
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+ /* Slave 2 reset value*/
+ 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins_s0: nandflash_pins_s0 {
+ pinctrl-single,pins = <
+ 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ >;
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins_s0>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ status = "okay";
+
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ nand-bus-width = <8>;
+ ti,nand-ecc-opt = "bch8";
+ ti,nand-xfer-type = "polled";
+
+ gpmc,device-nand = "true";
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ elm_id = <&elm>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65910_pins>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c02";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <20 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ ti,en-ck32k-xtal = <1>;
+
+ regulators {
+ vrtc_reg: regulator@0 {
+ regulator-always-on;
+ };
+
+ vio_reg: regulator@1 {
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1312500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd3_reg: regulator@4 {
+ regulator-always-on;
+ };
+
+ vdig1_reg: regulator@5 {
+ regulator-always-on;
+ };
+
+ vdig2_reg: regulator@6 {
+ regulator-always-on;
+ };
+
+ vpll_reg: regulator@7 {
+ regulator-always-on;
+ };
+
+ vdac_reg: regulator@8 {
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac = <1>;
+
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <7>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <2>;
+};
+
+&phy_sel {
+ rmii-clock-ext = <1>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc_reg>;
+ status = "okay";
+};
+
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&wl12xx_vmmc>;
+ ti,non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+
+ status = "okay";
+};
>;
};
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
reg = <0x24>;
};
+ baseboard_eeprom: baseboard_eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ baseboard_data: baseboard_data@0 {
+ reg = <0 0x100>;
+ };
+ };
};
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ cape_eeprom0: cape_eeprom0@54 {
+ compatible = "at,24c256";
+ reg = <0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape0_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom1: cape_eeprom1@55 {
+ compatible = "at,24c256";
+ reg = <0x55>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape1_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom2: cape_eeprom2@56 {
+ compatible = "at,24c256";
+ reg = <0x56>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape2_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+
+ cape_eeprom3: cape_eeprom3@57 {
+ compatible = "at,24c256";
+ reg = <0x57>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cape3_data: cape_data@0 {
+ reg = <0 0x100>;
+ };
+ };
+};
+
+
/include/ "tps65217.dtsi"
&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+ ti,pmic-shutdown-controller;
+
regulators {
dcdc1_reg: regulator@0 {
regulator-name = "vdds_dpr";
/dts-v1/;
#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "TI AM335x EVM";
regulator-boot-on;
};
+ wlan_en_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /* WLAN_EN GPIO for this board - Bank1, pin16 */
+ gpio = <&gpio1 16 0>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
matrix_keypad: matrix_keypad@0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
>;
};
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ >;
+ };
+
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+ 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+ 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+ 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+ 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+ 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+ >;
+ };
+
+ wlan_pins: pinmux_wlan_pins {
+ pinctrl-single,pins = <
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
+ 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
+ >;
+ };
+
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+&mmc3 {
+ /* these are on the crossbar and are outlined in the
+ xbar-event-map element */
+ dmas = <&edma 12
+ &edma 13>;
+ dma-names = "tx", "rx";
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins &wlan_pins>;
+ ti,non-removable;
+ ti,needs-special-hs-handling;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&edma {
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
+};
+
&sham {
status = "okay";
};
--- /dev/null
+/*
+ * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "Toby Churchill SL50 Series";
+ compatible = "tcl,am335x-sl50", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led@0 {
+ label = "sl50:green:usr0";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "sl50:red:usr1";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "sl50:green:usr2";
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "sl50:red:usr3";
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ backlight0: disp0 {
+ compatible = "pwm-backlight";
+ pwms = <&ehrpwm1 0 500000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+ default-brightness-level = <6>;
+ };
+
+ backlight1: disp1 {
+ compatible = "pwm-backlight";
+ pwms = <&ehrpwm1 1 500000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+ default-brightness-level = <6>;
+ };
+
+ sound {
+ compatible = "ti,da830-evm-audio";
+ ti,model = "AM335x-SL50";
+ ti,audio-codec = <&audio_codec>;
+ ti,mcasp-controller = <&mcasp0>;
+ ti,codec-clock-rate = <12000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1R", "Line In",
+ "LINE1L", "Line In";
+ };
+
+ emmc_pwrseq: pwrseq@0 {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pwrseq_pins>;
+ reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ };
+
+ vmmcsd_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lwb_pins>;
+
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */
+ AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rxd.i2c1_sda */
+ AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_txdi2c1_scl */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ >;
+ };
+
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
+ audio_pins: pinmux_audio_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+ AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+ AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
+ AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+ >;
+ };
+
+ ehrpwm1_pins: pinmux_ehrpwm1a_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */
+ >;
+ };
+
+ lwb_pins: pinmux_lwb_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
+ /* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */
+ /* PDI Bus - Battery system */
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+
+ audio_codec: tlv320aic3106@1b {
+ status = "okay";
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+
+ AVDD-supply = <&ldo4_reg>;
+ IOVDD-supply = <&ldo4_reg>;
+ DRVDD-supply = <&ldo4_reg>;
+ DVDD-supply = <&ldo3_reg>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "peripheral";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ mmc-pwrseq = <&emmc_pwrseq>;
+};
+
+&mcasp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_pins>;
+
+ op-mode = <0>; /* MCASP_ISS_MODE */
+ tdm-slots = <2>;
+ serial-dir = <
+ 2 0 1 0
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+ ti,pmic-shutdown-controller;
+
+ interrupt-parent = <&intc>;
+ interrupts = <7>; /* NNMI */
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ /* VDDS_DDR */
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ /* VRTC / VIO / VDDS*/
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2_reg: regulator@4 {
+ /* VDD_3V3AUX */
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo3_reg: regulator@5 {
+ /* VDD_1V8 */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ /* VDD_3V3A */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "mii";
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&epwmss1 {
+ status = "okay";
+};
+
+&ehrpwm1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+};
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
+
+ omap3_pmx_core2: pinmux@480025d8 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025d8 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
};
};
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <1>;
};
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&rmii_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <9>;
};
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <2>;
};
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&pclk_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <10>;
};
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <0>;
};
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <8>;
};
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&sys_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <3>;
};
};
aliases {
display0 = &lcd0;
+ serial3 = &uart3;
};
vmmcsd_fixed: fixedregulator-sd {
gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
};
+ vmmcwl_fixed: fixedregulator-mmcwl {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcwl_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
};
};
};
+
+ /* fixed 12MHz oscillator */
+ refclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
};
&am43xx_pinmux {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wlan_pins_default>;
+ pinctrl-1 = <&wlan_pins_sleep>;
+
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
>;
};
+
+ mmc3_pins_default: pinmux_mmc3_pins_default {
+ pinctrl-single,pins = <
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
+ >;
+ };
+
+ mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+ pinctrl-single,pins = <
+ 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
+ 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
+ 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
+ 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
+ 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
+ >;
+ };
+
+ wlan_pins_default: pinmux_wlan_pins_default {
+ pinctrl-single,pins = <
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ >;
+ };
+
+ wlan_pins_sleep: pinmux_wlan_pins_sleep {
+ pinctrl-single,pins = <
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ >;
+ };
+
+ uart3_pins: uart3_pins {
+ pinctrl-single,pins = <
+ 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
+ 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+ 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
+ 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+ >;
+ };
};
&i2c0 {
regulator-always-on;
};
};
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_0: endpoint {
+ remote-endpoint = <&vpfe1_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
};
&i2c1 {
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
};
+
+ ov2659@30 {
+ compatible = "ovti,ov2659";
+ reg = <0x30>;
+
+ clocks = <&refclk 0>;
+ clock-names = "xvclk";
+
+ port {
+ ov2659_1: endpoint {
+ remote-endpoint = <&vpfe0_ep>;
+ link-frequencies = /bits/ 64 <70000000>;
+ };
+ };
+ };
};
&epwmss0 {
status = "okay";
};
+&gpio1 {
+ status = "okay";
+};
+
&gpio3 {
status = "okay";
};
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+&mmc3 {
+ status = "okay";
+ /* these are on the crossbar and are outlined in the
+ xbar-event-map element */
+ dmas = <&edma 30
+ &edma 31>;
+ dma-names = "tx", "rx";
+ vmmc-supply = <&vmmcwl_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_sleep>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ ti,non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@0 {
+ compatible = "ti,wl1835";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&edma {
+ ti,edma-xbar-event-map = /bits/ 16 <1 30
+ 2 31>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
&usb2_phy1 {
status = "okay";
};
port {
vpfe0_ep: endpoint {
- /* remote-endpoint = <&sensor>; add once we have it */
+ remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
port {
vpfe1_ep: endpoint {
- /* remote-endpoint = <&sensor>; add once we have it */
+ remote-endpoint = <&ov2659_0>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
ranges;
syscon: syscon@10000000 {
- compatible = "arm,realview-pb1176-syscon", "syscon";
+ compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
led@08.0 {
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l25635e";
+ compatible = "mx25l25635e", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
};
--- /dev/null
+/*
+ * Device Tree file for D-Link DNS-327L
+ *
+ * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Remaining unsolved:
+ * There's still some unknown device on i2c address 0x13
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+ model = "D-Link DNS-327L";
+ compatible = "dlink,dns327l",
+ "marvell,armada370",
+ "marvell,armada-370-xp";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MiB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "u-boot";
+ /* 1.0 MiB */
+ reg = <0x0000000 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ /* 128 KiB */
+ reg = <0x100000 0x20000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "uImage";
+ /* 7 MiB */
+ reg = <0x120000 0x700000>;
+ };
+
+ partition@820000 {
+ label = "ubifs";
+ /* ~ 84 MiB */
+ reg = <0x820000 0x54e0000>;
+ };
+
+ /* Hardcoded into stock bootloader */
+ partition@5d00000 {
+ label = "failsafe-uImage";
+ /* 5 MiB */
+ reg = <0x5d00000 0x500000>;
+ };
+
+ partition@6200000 {
+ label = "failsafe-fs";
+ /* 29 MiB */
+ reg = <0x6200000 0x1d00000>;
+ };
+
+ partition@7f00000 {
+ label = "bbt";
+ /* 1 MiB for BBT */
+ reg = <0x7f00000 0x100000>;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <
+ &backup_button_pin
+ &power_button_pin
+ &reset_button_pin>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+
+ backup-button {
+ label = "Backup Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+ };
+
+ reset-button {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <
+ &sata_l_amber_pin
+ &sata_r_amber_pin
+ &backup_led_pin
+ /* Ensure these are managed by hardware */
+ &sata_l_white_pin
+ &sata_r_white_pin>;
+
+ pinctrl-names = "default";
+
+ sata-r-amber-pin {
+ label = "dns327l:amber:sata-r";
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ sata-l-amber-pin {
+ label = "dns327l:amber:sata-l";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ backup-led-pin {
+ label = "dns327l:white:usb";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ pinctrl-0 = <&xhci_pwr_pin>;
+ pinctrl-names = "default";
+ regulator-name = "USB3.0 Port Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata_r_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ pinctrl-0 = <&sata_r_pwr_pin>;
+ pinctrl-names = "default";
+ regulator-name = "SATA-R Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata_l_power: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ pinctrl-0 = <&sata_l_pwr_pin>;
+ pinctrl-names = "default";
+ regulator-name = "SATA-L Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ sata_l_white_pin: sata-l-white-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "sata0";
+ };
+
+ sata_r_white_pin: sata-r-white-pin {
+ marvell,pins = "mpp55";
+ marvell,function = "sata1";
+ };
+
+ sata_r_amber_pin: sata-r-amber-pin {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+
+ sata_l_amber_pin: sata-l-amber-pin {
+ marvell,pins = "mpp53";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp61";
+ marvell,function = "gpo";
+ };
+
+ xhci_pwr_pin: xhci-pwr-pin {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ sata_r_pwr_pin: sata-r-pwr-pin {
+ marvell,pins = "mpp54";
+ marvell,function = "gpio";
+ };
+
+ sata_l_pwr_pin: sata-l-pwr-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ uart1_pins: uart1-pins {
+ marvell,pins = "mpp60", "mpp61";
+ marvell,function = "uart1";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+};
+
+/* Serial console */
+&uart0 {
+ status = "okay";
+};
+
+/* Connected to Weltrend MCU */
+&uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ marvell,reg-init = <0x0 0x16 0x0 0x0002>,
+ <0x0 0x19 0x0 0x0077>,
+ <0x0 0x18 0x0 0x5747>;
+ };
+};
+
+ð1 {
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
+&i2c0 {
+ compatible = "marvell,mv64xxx-i2c";
+ clock-frequency = <100000>;
+ status = "okay";
+};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q064";
+ compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
spi0: spi@10600 {
- compatible = "marvell,armada-370-spi", "marvell,orion-spi";
reg = <0x10600 0x28>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,armada-370-spi", "marvell,orion-spi";
reg = <0x10680 0x28>;
#address-cells = <1>;
#size-cells = <0>;
* board level if a different configuration is used.
*/
spi0: spi@10600 {
+ compatible = "marvell,armada-370-spi",
+ "marvell,orion-spi";
pinctrl-0 = <&spi0_pins1>;
pinctrl-names = "default";
};
spi1: spi@10680 {
+ compatible = "marvell,armada-370-spi",
+ "marvell,orion-spi";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
spi0: spi@10600 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-375-spi",
+ "marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-375-spi",
+ "marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <54000000>;
};
--- /dev/null
+/*
+ * Device Tree include for the Linksys WRT1200AC (Caiman)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1200AC";
+ compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c@11000 {
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber@0 {
+ label = "caiman:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "caiman:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "caiman:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "caiman:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2@5 {
+ label = "caiman:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "caiman:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "caiman:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "caiman:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "caiman:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "caiman:white:power";
+ };
+
+ sata {
+ label = "caiman:white:sata";
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1900ACv2";
+ compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c@11000 {
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber@0 {
+ label = "cobra:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "cobra:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "cobra:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "cobra:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2@5 {
+ label = "cobra:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "cobra:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "cobra:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "cobra:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "cobra:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "cobra:white:power";
+ };
+
+ sata {
+ label = "cobra:white:sata";
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree include file for Armada 385 based Linksys boards
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+ model = "Linksys boards based on Armada 385";
+ compatible = "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+
+ spi@10600 {
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ tmp421@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,pca9635";
+ reg = <0x68>;
+ };
+ };
+
+ /* J10: VCC, NC, RX, NC, TX, GND */
+ serial@12000 {
+ status = "okay";
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet@34000 {
+ status = "okay";
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ mdio {
+ status = "okay";
+ };
+
+ sata@a8000 {
+ status = "okay";
+ };
+
+ /* USB part of the eSATA/USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ status = "okay";
+ usb-phy = <&usb3_phy>;
+ };
+
+ flash@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x200000>; /* 2MB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u_env";
+ reg = <0x200000 0x40000>; /* 256KB */
+ };
+
+ partition@140000 {
+ label = "s_env";
+ reg = <0x240000 0x40000>; /* 256KB */
+ };
+
+ partition@900000 {
+ label = "devinfo";
+ reg = <0x900000 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ /* kernel1 overlaps with rootfs1 by design */
+ partition@a00000 {
+ label = "kernel1";
+ reg = <0xa00000 0x2800000>; /* 40MB */
+ };
+
+ partition@1000000 {
+ label = "rootfs1";
+ reg = <0x1000000 0x2200000>; /* 34MB */
+ };
+
+ /* kernel2 overlaps with rootfs2 by design */
+ partition@3200000 {
+ label = "kernel2";
+ reg = <0x3200000 0x2800000>; /* 40MB */
+ };
+
+ partition@3800000 {
+ label = "rootfs2";
+ reg = <0x3800000 0x2200000>; /* 34MB */
+ };
+
+ /*
+ * 38MB, last MB is for the BBT, not writable
+ */
+ partition@5a00000 {
+ label = "syscfg";
+ reg = <0x5a00000 0x2600000>;
+ };
+
+ /*
+ * Unused area between "s_env" and "devinfo".
+ * Moved here because otherwise the renumbered
+ * partitions would break the bootloader
+ * supplied bootargs
+ */
+ partition@180000 {
+ label = "unused_area";
+ reg = <0x280000 0x680000>; /* 6.5MB */
+ };
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ /* Marvell 88W8864, 5GHz-only */
+ status = "okay";
+ };
+
+ pcie@2,0 {
+ /* Marvell 88W8864, 2GHz-only */
+ status = "okay";
+ };
+ };
+ };
+
+ usb3_phy: usb3_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <®_xhci0_vbus>;
+ };
+
+ reg_xhci0_vbus: xhci0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&xhci0_vbus_pins>;
+ regulator-name = "xhci0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&keys_pin>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "Factory Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&power_led_pin &sata_led_pin>;
+ pinctrl-names = "default";
+
+ power {
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ sata {
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð2>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
+};
+
+&pinctrl {
+ keys_pin: keys-pin {
+ marvell,pins = "mpp24", "mpp47";
+ marvell,function = "gpio";
+ };
+
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp55";
+ marvell,function = "gpio";
+ };
+
+ sata_led_pin: sata-led-pin {
+ marvell,pins = "mpp54";
+ marvell,function = "gpio";
+ };
+
+ xhci0_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp50";
+ marvell,function = "gpio";
+ };
+};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "w25q32";
+ compatible = "w25q32", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
m25p,fast-read;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
spi0: spi@10600 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-380-spi",
+ "marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-380-spi",
+ "marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- mdio@72004 {
+ mdio: mdio@72004 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
};
spi0: spi@10600 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-390-spi",
+ "marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@10680 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-390-spi",
+ "marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p64";
+ compatible = "m25p64", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "n25q128a13";
+ compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
internal-regs {
+ rtc@10300 {
+ /* No crystal connected to the internal RTC */
+ status = "disabled";
+ };
+
/* J10: VCC, NC, RX, NC, TX, GND */
serial@12000 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q064";
+ compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
spi0: spi@10600 {
+ compatible = "marvell,armada-xp-spi",
+ "marvell,orion-spi";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
};
+ spi1: spi@10680 {
+ compatible = "marvell,armada-xp-spi",
+ "marvell,orion-spi";
+ };
+
+
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
reg = <0xe000e100 0xc00>;
};
+ systick: timer@e000e010 {
+ compatible = "arm,armv7m-systick";
+ reg = <0xe000e010 0x10>;
+ status = "disabled";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
--- /dev/null
+/*
+ * Device Tree file for Arietta G25
+ * This device tree is minimal, to activate more peripherals, see:
+ * http://dts.acmesystems.it/arietta/
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+/ {
+ model = "Acme Systems Arietta G25";
+ compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ aliases {
+ serial0 = &dbgu;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0008000 {
+ pinctrl-0 = <
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
+ usb2: gadget@f803c000 {
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ rtc@fffffeb0 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <3>;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ arietta_led {
+ label = "arietta_led";
+ gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
--- /dev/null
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ * 2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox";
+ compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x2000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ macb0: ethernet@fffc4000 {
+ phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_macb_rmii
+ &pinctrl_macb_rmii_mii_alt>;
+ status = "okay";
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ watchdog@fffffd40 {
+ timeout-sec = <15>;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <1>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ network_green {
+ label = "pwm:green:network";
+ pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ network_red {
+ label = "pwm:red:network";
+ pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ user_green {
+ label = "pwm:green:user";
+ pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ user_red {
+ label = "pwm:red:user";
+ pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ tcb_pwm: pwm {
+ compatible = "atmel,tcb-pwm";
+ #pwm-cells = <3>;
+ tc-block = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tcb1_tioa0
+ &pinctrl_tcb1_tioa1
+ &pinctrl_tcb1_tioa2
+ &pinctrl_tcb1_tiob0>;
+ };
+};
--- /dev/null
+/*
+ * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox 2";
+ compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ i2c1: i2c@f0018000 {
+ status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "okay";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG1 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vddana_reg: LDO_REG2 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vled_reg: LDO_REG3 {
+ regulator-name = "VLED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v3v8_rf_reg: LDO_REG4 {
+ regulator-name = "V3V8_RF";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ usart0: serial@f001c000 {
+ status = "okay";
+ };
+
+ usart1: serial@f0020000 {
+ status = "okay";
+ };
+
+ pwm0: pwm@f002c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+ &pinctrl_pwm0_pwmh1_1
+ &pinctrl_pwm0_pwmh2_0>;
+ status = "okay";
+ };
+
+ adc0: adc@f8018000 {
+ atmel,adc-vref = <3333>;
+ status = "okay";
+ };
+
+ usart2: serial@f8020000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb1: ohci@00600000 {
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ gpio-key,wakeup;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ gpio-key,wakeup;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ blue {
+ label = "pwm:blue:user";
+ pwms = <&pwm0 2 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
--- /dev/null
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Overkiz Kizbox mini";
+ compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usart0: serial@f801c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ pwm0: pwm@f8034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+ &pinctrl_pwm0_pwm1_1>;
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00600000 {
+ num-ports = <1>;
+ status = "okay";
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ gpio-key,wakeup;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
chosen {
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
memory {
apb {
mmc0: mmc@f0000000 {
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+ vmmc-supply = <&vcc_mmc0_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
};
};
+ mmc1: mmc@f8000000 {
+ vmmc-supply = <&vcc_3v3_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "disabled";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
spi0: spi@f0004000 {
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ };
};
pwm0: pwm@f002c000 {
};
};
};
-
- pmc: pmc@fffffc00 {
- main: mainck {
- clock-frequency = <12000000>;
- };
- };
};
nand0: nand@60000000 {
};
};
+ vcc_mmc0_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+ regulator-name = "mmc0-card-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
gpio_keys {
compatible = "gpio-keys";
compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
chosen {
- bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+ bootargs = "ignore_loglevel earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
mmc1: mmc@fc000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ vmmc-supply = <&vcc_mmc1_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
status = "okay";
slot@0 {
reg = <0>;
status = "okay";
};
+ spi1: spi@fc018000 {
+ cs-gpios = <&pioB 21 0>;
+ status = "okay";
+ };
+
adc0: adc@fc034000 {
atmel,adc-vref = <3300>;
status = "okay";
linux,default-trigger = "heartbeat";
};
};
+
+ vcc_3v3_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC 3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_mmc1_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+ regulator-name = "VDD MCI1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_reg>;
+ };
};
compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
chosen {
- bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+ bootargs = "ignore_loglevel earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
mmc0: mmc@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
- slot@1 {
- reg = <1>;
+ slot@0 {
+ reg = <0>;
bus-width = <4>;
cd-gpios = <&pioE 5 0>;
};
};
ramc0: ramc@ffffff00 {
- compatible = "atmel,at91rm9200-sdramc";
+ compatible = "atmel,at91rm9200-sdramc", "syscon";
reg = <0xffffff00 0x100>;
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
model = "Atmel AT91RM9200 evaluation kit";
compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory {
reg = <0x20000000 0x4000000>;
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
chosen {
- bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+ bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+ stdout-path = "serial0:115200n8";
};
memory {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
chosen {
- bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+ stdout-path = "serial0:115200n8";
};
memory {
/ {
chosen {
- bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+ stdout-path = "serial0:115200n8";
};
memory {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
};
compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
chosen {
- bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+ bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
+ stdout-path = "serial0:115200n8";
};
memory {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
- <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
chosen {
- bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+ bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2";
+ stdout-path = "serial0:115200n8";
};
memory {
};
};
- rtc@fffffeb0 {
- compatible = "atmel,at91rm9200-rtc";
- reg = <0xfffffeb0 0x40>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- status = "disabled";
- };
-
rtc@fffffd20 {
compatible = "atmel,at91sam9260-rtt";
reg = <0xfffffd20 0x10>;
reg = <0xfffffd60 0x10>;
status = "disabled";
};
+
+ rtc@fffffe00 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffe00 0x40>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+
};
};
compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
chosen {
- bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+ bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+ stdout-path = "serial0:115200n8";
};
memory {
};
};
- pmc: pmc@fffffc00 {
- main: mainck {
- clock-frequency = <12000000>;
- };
+ watchdog@fffffd40 {
+ status = "okay";
};
- watchdog@fffffd40 {
+ rtc@fffffe00 {
status = "okay";
};
};
pinctrl_usart1_sck: usart1_sck-0 {
atmel,pins =
- <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
+ <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
};
};
};
};
+ pwm0 {
+ pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+ atmel,pins =
+ <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+ atmel,pins =
+ <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+ atmel,pins =
+ <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+ atmel,pins =
+ <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+ atmel,pins =
+ <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+ atmel,pins =
+ <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+ atmel,pins =
+ <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+ atmel,pins =
+ <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+ atmel,pins =
+ <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
};
compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
- bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ stdout-path = "serial0:115200n8";
};
ahb {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
status = "disabled";
};
+ nand: nand@18046000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+ reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
gic: interrupt-controller@19021000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
/dts-v1/;
-/include/ "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
/* I2S interface */
i2s_alt0: i2s_alt0 {
brcm,pins = <18 19 20 21>;
- brcm,function = <4>; /* alt0 */
+ brcm,function = <BCM2835_FSEL_ALT0>;
};
};
/dts-v1/;
-/include/ "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-b", "brcm,bcm2835";
/* I2S interface */
i2s_alt2: i2s_alt2 {
brcm,pins = <28 29 30 31>;
- brcm,function = <6>; /* alt2 */
+ brcm,function = <BCM2835_FSEL_ALT2>;
};
};
-/include/ "bcm2835.dtsi"
+#include "bcm2835.dtsi"
/ {
memory {
gpioout: gpioout {
brcm,pins = <6>;
- brcm,function = <1>; /* GPIO out */
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
};
alt0: alt0 {
brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
- brcm,function = <4>; /* alt0 */
+ brcm,function = <BCM2835_FSEL_ALT0>;
};
alt3: alt3 {
brcm,pins = <48 49 50 51 52 53>;
- brcm,function = <7>; /* alt3 */
+ brcm,function = <BCM2835_FSEL_ALT3>;
};
};
-/include/ "skeleton.dtsi"
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include "skeleton.dtsi"
/ {
compatible = "brcm,bcm2835";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x7e000000 0x20000000 0x02000000>;
+ dma-ranges = <0x40000000 0x00000000 0x20000000>;
timer@7e003000 {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e104000 0x10>;
};
+ mailbox: mailbox@7e00b800 {
+ compatible = "brcm,bcm2835-mbox";
+ reg = <0x7e00b880 0x40>;
+ interrupts = <0 1>;
+ #mbox-cells = <0>;
+ };
+
gpio: gpio@7e200000 {
compatible = "brcm,bcm2835-gpio";
reg = <0x7e200000 0xb4>;
status = "disabled";
};
- i2c0: i2c@20205000 {
+ i2c0: i2c@7e205000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e205000 0x1000>;
interrupts = <2 21>;
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC56U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "asus,rt-ac56u", "brcm,bcm4708";
+ model = "Asus RT-AC56U (BCM4708)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb3 {
+ label = "bcm53xx:blue:usb3";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:blue:wan";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan {
+ label = "bcm53xx:blue:lan";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ power {
+ label = "bcm53xx:blue:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ all {
+ label = "bcm53xx:blue:all";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+
+ usb2 {
+ label = "bcm53xx:blue:usb2";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC68U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "asus,rt-ac68u", "brcm,bcm4708";
+ model = "Asus RT-AC68U (BCM4708)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb2 {
+ label = "bcm53xx:blue:usb2";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ power {
+ label = "bcm53xx:blue:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ logo {
+ label = "bcm53xx:white:logo";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb3 {
+ label = "bcm53xx:blue:usb3";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brightness {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
/dts-v1/;
#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
leds {
compatible = "gpio-leds";
+ usb {
+ label = "bcm53xx:blue:usb";
+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
power0 {
label = "bcm53xx:red:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
/dts-v1/;
#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "luxul,xwc-1000", "brcm,bcm4708";
reg = <0x00000000 0x08000000>;
};
- axi@18000000 {
- nand@28000 {
- reg = <0x00028000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
+ nand: nand@18028000 {
+ nandcs@0 {
partition@0 {
label = "ubi";
reg = <0x00000000 0x08000000>;
/dts-v1/;
#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "netgear,r6250v1", "brcm,bcm4708";
/dts-v1/;
#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "netgear,r6300v2", "brcm,bcm4708";
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for SmartRG SR400ac
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "smartrg,sr400ac", "brcm,bcm4708";
+ model = "SmartRG SR400ac";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power-white {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ power-amber {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3-white {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3-green {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:white:wps";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ status-red {
+ label = "bcm53xx:red:status";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ status-green {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ status-blue {
+ label = "bcm53xx:blue:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-white {
+ label = "bcm53xx:white:wan";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-red {
+ label = "bcm53xx:red:wan";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
/dts-v1/;
#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
/dts-v1/;
#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
/dts-v1/;
#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC87U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Asus RT-AC87U";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ power {
+ label = "bcm53xx:blue:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan {
+ label = "bcm53xx:red:wan";
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WXR-1900DHP
+ *
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Buffalo WXR-1900DHP";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "bcm53xx:green:usb";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ power-amber {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ power-white {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ router-amber {
+ label = "bcm53xx:amber:router";
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ router-white {
+ label = "bcm53xx:white:router";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-white {
+ label = "bcm53xx:white:wan";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless-amber {
+ label = "bcm53xx:amber:wireless";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless-white {
+ label = "bcm53xx:white:wireless";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+
+ aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Commit mode set by switch? */
+ mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: AP mode */
+ sw_ap {
+ label = "AP";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ };
+
+ eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
/dts-v1/;
#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X Nand chip defaults.
+ *
+ * This should be included if the NAND controller is on chip select 0
+ * and uses 8 bit ECC.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/ {
+ nand@18028000 {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ };
+ };
+};
/* ChipCommon */
<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ /* PCIe Controller 0 */
+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 1 */
+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 2 */
+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
/* USB 2.0 Controller */
<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
#gpio-cells = <2>;
};
};
+
+ nand: nand@18028000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
};
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0>;
+ enable-method = "brcm,bcm63138";
};
cpu@1 {
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <1>;
+ enable-method = "brcm,bcm63138";
+ resets = <&pmb0 4 1>;
};
};
reg = <0x1e620 0x20>;
interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ pmb0: reset-controller@4800c0 {
+ compatible = "brcm,bcm63138-pmb";
+ reg = <0x4800c0 0x10>;
+ #reset-cells = <2>;
+ };
+
+ pmb1: reset-controller@4800e0 {
+ compatible = "brcm,bcm63138-pmb";
+ reg = <0x4800e0 0x10>;
+ #reset-cells = <2>;
+ };
};
/* Legacy UBUS base */
#size-cells = <1>;
ranges = <0 0xfffe8000 0x8100>;
+ timer: timer@80 {
+ compatible = "brcm,bcm6328-timer", "syscon";
+ reg = <0x80 0x3c>;
+ };
+
serial0: serial@600 {
compatible = "brcm,bcm6345-uart";
reg = <0x600 0x1b>;
clock-names = "periph";
status = "disabled";
};
+
+ nand: nand@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+ reg = <0x2000 0x600>, <0xf0 0x10>;
+ reg-names = "nand", "nand-int-base";
+ status = "disabled";
+ interrupts = <GIC_SPI 38 0>;
+ interrupt-names = "nand";
+ };
+
+ bootlut: bootlut@8000 {
+ compatible = "brcm,bcm63138-bootlut";
+ reg = <0x8000 0x50>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&timer>;
+ offset = <0x34>;
+ mask = <1>;
+ };
};
};
<0x00 0x80000000 0x00 0x40000000>;
};
};
+
+&nand {
+ status = "okay";
+
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <1>;
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <8>;
+ nand-on-flash-bbt;
+
+ #size-cells = <2>;
+ #address-cells = <2>;
+
+ flash1.rootfs0@0 {
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ flash1.rootfs1@80000000 {
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+ };
+};
brcm,int-map-mask = <0x25c>, <0x7000000>;
brcm,int-fwd-mask = <0x70000>;
};
+
+ hif_intr2_intc: interrupt-controller@3e1000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x3e1000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 0x20 0x0>;
+ interrupt-parent = <&gic>;
+ interrupt-names = "hif";
+ };
+
+ nand: nand@3e2800 {
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+ reg-names = "nand", "flash-dma";
+ reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
+ interrupt-parent = <&hif_intr2_intc>;
+ interrupts = <24>, <4>;
+ interrupt-names = "nand_ctlrdy", "flash_dma_done";
+ };
+
+ sata@45a000 {
+ compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x45a000 0xa9c>, <0x458040 0x24>;
+ interrupts = <GIC_SPI 30 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@458100 {
+ compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+ reg = <0x458100 0x1f00>;
+ reg-names = "phy";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
};
smpboot {
uart3: serial@18023000 {
status = "okay";
};
+
+ nand: nand@18046000 {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+ };
+ };
};
&serial1 {
status = "okay";
};
+
+&nand {
+ status = "okay";
+
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ brcm,nand-oob-sectors-size = <16>;
+ };
+};
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* based on GPL'ed 2.6 kernel sources
* (c) Marvell International Ltd.
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
clock-names = "io", "core";
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
pinctrl-0 = <&emmc_pmux>;
pinctrl-names = "default";
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
};
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH1>;
+ clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "marvell,berlin2-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
sata_phy: phy@e900a0 {
compatible = "marvell,berlin2-sata-phy";
reg = <0xe900a0 0x200>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
};
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- clocks = <&refclk>;
- clock-names = "refclk";
- emmc_pmux: emmc-pmux {
- groups = "G26";
- function = "emmc";
+ chip_clk: clock {
+ compatible = "marvell,berlin2-clk";
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
+
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2-soc-pinctrl";
+
+ emmc_pmux: emmc-pmux {
+ groups = "G26";
+ function = "emmc";
+ };
+ };
+
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};
};
sysctrl: system-controller@d000 {
- compatible = "marvell,berlin2-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
- uart0_pmux: uart0-pmux {
- groups = "GSM4";
- function = "uart0";
- };
-
- uart1_pmux: uart1-pmux {
- groups = "GSM5";
- function = "uart1";
- };
-
- uart2_pmux: uart2-pmux {
- groups = "GSM3";
- function = "uart2";
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2-system-pinctrl";
+ uart0_pmux: uart0-pmux {
+ groups = "GSM4";
+ function = "uart0";
+ };
+
+ uart1_pmux: uart1-pmux {
+ groups = "GSM5";
+ function = "uart1";
+ };
+ uart2_pmux: uart2-pmux {
+ groups = "GSM3";
+ function = "uart2";
+ };
};
};
*
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* based on GPL'ed 2.6 kernel sources
* (c) Marvell International Ltd.
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
clock-names = "io", "core";
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
};
usb_phy0: usb-phy@b74000 {
compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x178 23>;
+ resets = <&chip_rst 0x178 23>;
status = "disabled";
};
compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x178 24>;
+ resets = <&chip_rst 0x178 24>;
status = "disabled";
};
eth1: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH1>;
+ clocks = <&chip_clk CLKID_GETH1>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
eth0: ethernet@e50000 {
compatible = "marvell,pxa168-eth";
reg = <0xe50000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
interrupts = <8>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
interrupts = <9>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "okay";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
interrupts = <10>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
interrupts = <11>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
interrupts = <12>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
interrupts = <13>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
interrupts = <14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
interrupts = <15>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
};
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2cd-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>;
- clocks = <&refclk>;
- clock-names = "refclk";
- uart0_pmux: uart0-pmux {
- groups = "G6";
- function = "uart0";
+ chip_clk: clock {
+ compatible = "marvell,berlin2-clk";
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
+
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2cd-soc-pinctrl";
+
+ uart0_pmux: uart0-pmux {
+ groups = "G6";
+ function = "uart0";
+ };
+ };
+
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};
compatible = "chipidea,usb2";
reg = <0xed0000 0x200>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB0>;
+ clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
compatible = "chipidea,usb2";
reg = <0xee0000 0x200>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB1>;
+ clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
};
sysctrl: system-controller@d000 {
- compatible = "marvell,berlin2cd-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
+
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2cd-system-pinctrl";
+ };
};
sic: interrupt-controller@e000 {
/*
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/berlin2q.h>
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sdhci1: sdhci@ab0800 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0800 0x200>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip_clk CLKID_SDIO1XIN>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
clock-names = "io", "core";
status = "disabled";
};
local-timer@ad0600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
- clocks = <&chip CLKID_TWD>;
+ clocks = <&chip_clk CLKID_TWD>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
compatible = "marvell,berlin2-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 14>;
+ resets = <&chip_rst 0x104 14>;
status = "disabled";
};
compatible = "chipidea,usb2";
reg = <0xa30000 0x10000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB2>;
+ clocks = <&chip_clk CLKID_USB2>;
phys = <&usb_phy2>;
phy-names = "usb-phy";
status = "disabled";
compatible = "marvell,berlin2-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 12>;
+ resets = <&chip_rst 0x104 12>;
status = "disabled";
};
compatible = "marvell,berlin2-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
- resets = <&chip 0x104 13>;
+ resets = <&chip_rst 0x104 13>;
status = "disabled";
};
eth0: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
- clocks = <&chip CLKID_GETH0>;
+ clocks = <&chip_clk CLKID_GETH0>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
/* set by bootloader */
local-mac-address = [00 00 00 00 00 00];
reg = <0x1400 0x100>;
interrupt-parent = <&aic>;
interrupts = <4>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi0_pmux>;
pinctrl-names = "default";
status = "disabled";
reg = <0x1800 0x100>;
interrupt-parent = <&aic>;
interrupts = <5>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi1_pmux>;
pinctrl-names = "default";
status = "disabled";
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
interrupts = <8>;
};
timer1: timer@2c14 {
compatible = "snps,dw-apb-timer";
reg = <0x2c14 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
};
timer2: timer@2c28 {
compatible = "snps,dw-apb-timer";
reg = <0x2c28 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
timer3: timer@2c3c {
compatible = "snps,dw-apb-timer";
reg = <0x2c3c 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
timer4: timer@2c50 {
compatible = "snps,dw-apb-timer";
reg = <0x2c50 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
timer5: timer@2c64 {
compatible = "snps,dw-apb-timer";
reg = <0x2c64 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
timer6: timer@2c78 {
compatible = "snps,dw-apb-timer";
reg = <0x2c78 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
timer7: timer@2c8c {
compatible = "snps,dw-apb-timer";
reg = <0x2c8c 0x14>;
- clocks = <&chip CLKID_CFG>;
+ clocks = <&chip_clk CLKID_CFG>;
clock-names = "timer";
status = "disabled";
};
};
chip: chip-control@ea0000 {
- compatible = "marvell,berlin2q-chip-ctrl";
- #clock-cells = <1>;
- #reset-cells = <2>;
+ compatible = "simple-mfd", "syscon";
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
- clocks = <&refclk>;
- clock-names = "refclk";
- twsi0_pmux: twsi0-pmux {
- groups = "G6";
- function = "twsi0";
+ chip_clk: clock {
+ compatible = "marvell,berlin2q-clk";
+ #clock-cells = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ };
+
+ soc_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-soc-pinctrl";
+
+ twsi0_pmux: twsi0-pmux {
+ groups = "G6";
+ function = "twsi0";
+ };
+
+ twsi1_pmux: twsi1-pmux {
+ groups = "G7";
+ function = "twsi1";
+ };
};
- twsi1_pmux: twsi1-pmux {
- groups = "G7";
- function = "twsi1";
+ chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
};
};
compatible = "marvell,berlin2q-ahci", "generic-ahci";
reg = <0xe90000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
sata_phy: phy@e900a0 {
compatible = "marvell,berlin2q-sata-phy";
reg = <0xe900a0 0x200>;
- clocks = <&chip CLKID_SATA>;
+ clocks = <&chip_clk CLKID_SATA>;
#address-cells = <1>;
#size-cells = <0>;
#phy-cells = <1>;
compatible = "chipidea,usb2";
reg = <0xed0000 0x10000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB0>;
+ clocks = <&chip_clk CLKID_USB0>;
phys = <&usb_phy0>;
phy-names = "usb-phy";
status = "disabled";
compatible = "chipidea,usb2";
reg = <0xee0000 0x10000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_USB1>;
+ clocks = <&chip_clk CLKID_USB1>;
phys = <&usb_phy1>;
phy-names = "usb-phy";
status = "disabled";
};
sysctrl: pin-controller@d000 {
- compatible = "marvell,berlin2q-system-ctrl";
+ compatible = "simple-mfd", "syscon";
reg = <0xd000 0x100>;
- uart0_pmux: uart0-pmux {
- groups = "GSM12";
- function = "uart0";
- };
+ sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-system-pinctrl";
- uart1_pmux: uart1-pmux {
- groups = "GSM14";
- function = "uart1";
- };
+ uart0_pmux: uart0-pmux {
+ groups = "GSM12";
+ function = "uart0";
+ };
+
+ uart1_pmux: uart1-pmux {
+ groups = "GSM14";
+ function = "uart1";
+ };
+
+ twsi2_pmux: twsi2-pmux {
+ groups = "GSM13";
+ function = "twsi2";
+ };
- twsi2_pmux: twsi2-pmux {
- groups = "GSM13";
- function = "twsi2";
+ twsi3_pmux: twsi3-pmux {
+ groups = "GSM14";
+ function = "twsi3";
+ };
};
- twsi3_pmux: twsi3-pmux {
- groups = "GSM14";
- function = "twsi3";
+ adc: adc {
+ compatible = "marvell,berlin2-adc";
+ interrupts = <12>, <14>;
+ interrupt-names = "adc", "tsen";
};
};
clocks = <&main_clk>;
};
+ rtc@f0000c30 {
+ compatible = "cnxt,cx92755-rtc";
+ reg = <0xf0000c30 0x18>;
+ interrupts = <25>;
+ };
+
uc_regs: syscon@f00003a0 {
compatible = "cnxt,cx92755-uc", "syscon";
reg = <0xf00003a0 0x10>;
interrupts = <46>;
status = "disabled";
};
+
+ i2c: i2c@f0000120 {
+ compatible = "cnxt,cx92755-i2c";
+ reg = <0xf0000120 0x10>;
+ interrupts = <28>;
+ clocks = <&main_clk>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
&uart0 {
status = "okay";
};
+
+&i2c {
+ status = "okay";
+};
ti,hwmods = "usb_otg_hs";
usb0: usb@47401000 {
- compatible = "ti,musb-am33xx";
+ compatible = "ti,musb-dm816";
reg = <0x47401400 0x400
0x47401000 0x200>;
reg-names = "mc", "control";
};
usb1: usb@47401800 {
- compatible = "ti,musb-am33xx";
+ compatible = "ti,musb-dm816";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
+++ /dev/null
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
- model = "Compulab CM-A510";
- compatible = "compulab,cm-a510", "marvell,dove";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- };
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
- status = "okay";
-
- /* spi0.0: 4M Flash Winbond W25Q32BV */
- spi-flash@0 {
- compatible = "st,w25q32";
- spi-max-frequency = <20000000>;
- reg = <0>;
- };
-};
-
-&i2c0 {
- status = "okay";
-};
--- /dev/null
+/*
+ * Device Tree include for Compulab CM-A510 System-on-Module
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The CM-A510 comes with several optional components:
+ *
+ * Memory options:
+ * D512: 512M
+ * D1024: 1G
+ *
+ * NAND options:
+ * N512: 512M NAND
+ *
+ * Ethernet options:
+ * E1: PHY RTL8211D on internal GbE (SMI address 0x03)
+ * E2: Additional ethernet NIC RTL8111D on PCIe1
+ *
+ * Audio options:
+ * A: TI TLV320AIC23b audio codec (I2C address 0x1a)
+ *
+ * Touchscreen options:
+ * I: TI TSC2046 touchscreen controller (on SPI1)
+ *
+ * USB options:
+ * U2: 2 dual-role USB2.0 ports
+ * U4: 2 additional USB2.0 host ports (via USB1)
+ *
+ * WiFi options:
+ * W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1)
+ *
+ * GPIOs used on CM-A510:
+ * 1 GbE PHY reset (active low)
+ * 3 WakeUp
+ * 8 PowerOff (active low)
+ * 13 Touchscreen pen irq (active low)
+ * 65 System LED (active high)
+ * 69 USB Hub reset (active low)
+ * 70 WLAN reset (active low)
+ * 71 WLAN regulator (active high)
+ */
+
+#include "dove.dtsi"
+
+/ {
+ model = "Compulab CM-A510";
+ compatible = "compulab,cm-a510", "marvell,dove";
+
+ /*
+ * Set the minimum memory size here and let the
+ * bootloader set the real size.
+ */
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ /* Set upper NAND data bit to GPO */
+ pinctrl-0 = <&pmx_nand_gpo>;
+ pinctrl-names = "default";
+
+ system {
+ label = "cm-a510:system:green";
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "WiFi Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+/* Optional RTL8211D GbE PHY on SMI address 0x03 */
+ðphy {
+ reg = <3>;
+ status = "disabled";
+};
+
+&i2c0 {
+ /* Optional TI TLV320AIC23b audio codec */
+ opt_audio: audio@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ status = "disabled";
+ };
+};
+
+/* Optional RTL8111D GbE NIC on PCIe1 */
+&pcie { status = "disabled"; };
+
+&pcie1 {
+ pinctrl-0 = <&pmx_pcie1_clkreq>;
+ pinctrl-names = "default";
+ status = "disabled";
+};
+
+&pinctrl {
+ pmx_uart2: pmx-uart2 {
+ marvell,pins = "mpp14", "mpp15";
+ marvell,function = "uart2";
+ };
+};
+
+/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
+&sdio1 {
+ non-removable;
+ vmmc-supply = <&wifi_power>;
+ reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+};
+
+&spi0 {
+ status = "okay";
+
+ /* 1M Flash Winbond W25Q80BL */
+ flash@0 {
+ compatible = "winbond,w25q80";
+ spi-max-frequency = <80000000>;
+ reg = <0>;
+ };
+};
+
+&spi1 {
+ pinctrl-0 = <&pmx_spi1_20_23>;
+ pinctrl-names = "default";
+ status = "disabled";
+
+ /* Optional TI TSC2046 touchscreen controller */
+ opt_touch: touchscreen@0 {
+ compatible = "ti,tsc2046";
+ spi-max-frequency = <2500000>;
+ reg = <0>;
+ pinctrl-0 = <&pmx_gpio_13>;
+ pinctrl-names = "default";
+ interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&uart2 {
+ pinctrl-0 = <&pmx_uart2>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/*
+ * Device Tree file for Compulab SBC-A510 Single Board Computer
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to
+ *
+ * 0.0 USB0 VBUS_EN (active high)
+ * 0.1 USB0 VBUS_GOOD
+ * 0.2 DVI transmitter TI TFP410 MSEN
+ * 0.3 DVI transmitter TI TFP410 PD# (active low power down)
+ * 0.4 LVDS transmitter DS90C365 PD# (active low power down)
+ * 0.5 LCD nRST (active low reset)
+ * 0.6 PCIe0 nRST (active low reset)
+ * 0.7 mini-PCIe slot W_DISABLE#
+ *
+ * 1.0 MMC WP
+ * 1.1 Camera Input FPC FLASH_STB and P21.5
+ * 1.2 Camera Input FPC WE and P21.22
+ * 1.3 MMC VCC_EN (active high) and P21.7
+ * 1.4 Camera Input FPC AFTR_RST and P21.17
+ * 1.5 Camera Input FPC OE and P21.19
+ * 1.6 Camera Input FPC SNPSHT and P21.6
+ * 1.7 Camera Input FPC SHTR and P21.10
+ */
+
+/dts-v1/;
+
+#include "dove-cm-a510.dtsi"
+
+/ {
+ model = "Compulab SBC-A510";
+ compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove";
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ regulators {
+ usb0_power: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ mmc_power: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "MMC Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+/* Ethernet0 depends on CM-A510 option E1 */
+&mdio { status = "disabled"; };
+ð { status = "disabled"; };
+ðphy { status = "disabled"; };
+
+/*
+ * USB port 0 can be powered and monitored by I2C GPIO expander:
+ * VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1
+ */
+&ehci0 {
+ status = "okay";
+ vbus-supply = <&usb0_power>;
+};
+
+/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */
+&ehci1 { status = "okay"; };
+
+/*
+ * I2C bus layout:
+ * i2c0:
+ * - Audio Codec, 0x1a (option from CM-A510)
+ * - DVI transmitter TI TFP410, 0x39
+ * - HDMI/DVI DDC channel
+ * i2c1:
+ * - GPIO expander, NXP PCA9555, 0x20
+ * - VGA DDC channel
+ */
+&i2c {
+ pinctrl-0 = <&pmx_i2c1>;
+ pinctrl-names = "default";
+};
+
+&i2c0 {
+ /* TI TFP410 DVI transmitter */
+ dvi: video@39 {
+ compatible = "ti,tfp410";
+ reg = <0x39>;
+ powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* NXP PCA9555 GPIO expander */
+ gpio_ext: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ };
+};
+
+&pcie { status = "okay"; };
+
+/*
+ * PCIe0 can be configured by Jumper E1 to be either connected to
+ * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge.
+ */
+&pcie0 {
+ status = "okay";
+ pinctrl-0 = <&pmx_pcie0_clkreq>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
+};
+
+/* Ethernet1 depends on CM-A510 option E2 */
+&pcie1 { status = "disabled"; };
+
+/* SATA connector */
+&sata0 { status = "okay"; };
+
+/*
+ * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has
+ * VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
+ */
+&sdio0 {
+ vmmc-supply = <&mmc_power>;
+ wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* UART0 on RS232 mini-connector */
+&uart0 { status = "okay"; };
+/* UART2 on pin headers */
+&uart2 { status = "okay"; };
marvell,tauros2-cache-features = <0>;
};
+ i2c-mux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c>;
+
+ pinctrl-names = "i2c0", "i2c1", "i2c2";
+ pinctrl-0 = <&pmx_i2cmux_0>;
+ pinctrl-1 = <&pmx_i2cmux_1>;
+ pinctrl-2 = <&pmx_i2cmux_2>;
+
+ i2c0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ };
+
+ i2c1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Requires pmx_i2c1 on i2c controller node */
+ status = "disabled";
+ };
+
+ i2c2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Requires pmx_i2c2 on i2c controller node */
+ status = "disabled";
+ };
+ };
+
mbus {
compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
#address-cells = <2>;
status = "disabled";
};
- i2c0: i2c-ctrl@11000 {
+ i2c: i2c-ctrl@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
clock-frequency = <400000>;
timeout-ms = <1000>;
clocks = <&core_clk 0>;
- status = "disabled";
+ status = "okay";
};
uart0: serial@12000 {
regulator-boot-on;
};
- lan9220@20000000 {
+ ethernet@20000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x20000000 0x10000>;
phy-mode = "mii";
};
&pfc {
- uart1_pins: uart@e1030000 {
+ uart1_pins: serial@e1030000 {
renesas,groups = "uart1_ctrl", "uart1_data";
renesas,function = "uart1";
};
#include "exynos3250.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
/ {
model = "Samsung Monk board";
};
&rtc {
- clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+ clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
status = "okay";
};
#include "exynos3250.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
/ {
model = "Samsung Rinato board";
status = "okay";
};
+&jpeg {
+ status = "okay";
+};
+
&mshc_0 {
#address-cells = <1>;
#size-cells = <0>;
};
&rtc {
- clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+ clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
status = "okay";
};
};
rtc: rtc@10070000 {
- compatible = "samsung,exynos3250-rtc";
+ compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 73 0>, <0 74 0>;
interrupt-parent = <&pmu_system_controller>;
interrupts = <0 240 0>;
};
+ jpeg: codec@11830000 {
+ compatible = "samsung,exynos3250-jpeg";
+ reg = <0x11830000 0x1000>;
+ interrupts = <0 171 0>;
+ clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
+ clock-names = "jpeg", "sclk";
+ power-domains = <&pd_cam>;
+ assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>;
+ assigned-clock-rates = <0>, <150000000>;
+ assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>;
+ iommus = <&sysmmu_jpeg>;
+ status = "disabled";
+ };
+
+ sysmmu_jpeg: sysmmu@11A60000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11a60000 0x1000>;
+ interrupts = <0 156 0>, <0 161 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
+ power-domains = <&pd_cam>;
+ #iommu-cells = <0>;
+ };
+
fimd: fimd@11c00000 {
compatible = "samsung,exynos3250-fimd";
reg = <0x11c00000 0x30000>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
power-domains = <&pd_lcd0>;
+ iommus = <&sysmmu_fimd0>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
status = "disabled";
};
+ sysmmu_fimd0: sysmmu@11E20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11e20000 0x1000>;
+ interrupts = <0 80 0>, <0 81 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
+ power-domains = <&pd_lcd0>;
+ #iommu-cells = <0>;
+ };
+
hsotg: hsotg@12480000 {
compatible = "snps,dwc2";
reg = <0x12480000 0x20000>;
clock-names = "mfc", "sclk_mfc";
clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
power-domains = <&pd_mfc>;
+ iommus = <&sysmmu_mfc>;
status = "disabled";
};
+ sysmmu_mfc: sysmmu@13620000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13620000 0x1000>;
+ interrupts = <0 96 0>, <0 98 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
+ power-domains = <&pd_mfc>;
+ #iommu-cells = <0>;
+ };
+
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
- reg = <0x10020710 8>;
#phy-cells = <1>;
syscon = <&pmu_system_controller>;
};
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
+ iommus = <&sysmmu_fimc0>;
status = "disabled";
};
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
+ iommus = <&sysmmu_fimc1>;
status = "disabled";
};
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
+ iommus = <&sysmmu_fimc2>;
status = "disabled";
};
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
+ iommus = <&sysmmu_fimc3>;
status = "disabled";
};
};
};
- watchdog@10060000 {
+ watchdog: watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
status = "disabled";
};
- rtc@10070000 {
+ rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupt-parent = <&pmu_system_controller>;
status = "disabled";
};
- keypad@100A0000 {
+ keypad: keypad@100A0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
status = "disabled";
};
- sdhci@12510000 {
+ sdhci_0: sdhci@12510000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
status = "disabled";
};
- sdhci@12520000 {
+ sdhci_1: sdhci@12520000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
status = "disabled";
};
- sdhci@12530000 {
+ sdhci_2: sdhci@12530000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
status = "disabled";
};
- sdhci@12540000 {
+ sdhci_3: sdhci@12540000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
status = "disabled";
};
- hsotg@12480000 {
+ hsotg: hsotg@12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
interrupts = <0 71 0>;
status = "disabled";
};
- ehci@12580000 {
+ ehci: ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
interrupts = <0 70 0>;
};
};
- ohci@12590000 {
+ ohci: ohci@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
interrupts = <0 70 0>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
clock-names = "mfc", "sclk_mfc";
+ iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+ iommu-names = "left", "right";
status = "disabled";
};
status = "disabled";
};
- pwm@139D0000 {
+ pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
power-domains = <&pd_lcd0>;
+ iommus = <&sysmmu_fimd0>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
#include "exynos4412-tmu-sensor-conf.dtsi"
};
+ jpeg_codec: jpeg-codec@11840000 {
+ compatible = "samsung,exynos4210-jpeg";
+ reg = <0x11840000 0x1000>;
+ interrupts = <0 88 0>;
+ clocks = <&clock CLK_JPEG>;
+ clock-names = "jpeg";
+ power-domains = <&pd_cam>;
+ };
+
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
interrupts = <0 91 0>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
+ iommus = <&sysmmu_tv>;
status = "disabled";
};
clock-names = "ppmu";
status = "disabled";
};
+
+ sysmmu_mfc_l: sysmmu@13620000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13620000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+ power-domains = <&pd_mfc>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_r: sysmmu@13630000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13630000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 6>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+ power-domains = <&pd_mfc>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_tv: sysmmu@12E20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12E20000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 4>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+ power-domains = <&pd_tv>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc0: sysmmu@11A20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11A20000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
+ power-domains = <&pd_cam>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc1: sysmmu@11A30000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11A30000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 3>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
+ power-domains = <&pd_cam>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc2: sysmmu@11A40000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11A40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 4>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
+ power-domains = <&pd_cam>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc3: sysmmu@11A50000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11A50000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
+ power-domains = <&pd_cam>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_jpeg: sysmmu@11A60000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11A60000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 6>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+ power-domains = <&pd_cam>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_rotator: sysmmu@12A30000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12A30000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+ power-domains = <&pd_lcd0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimd0: sysmmu@11E20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11E20000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
+ power-domains = <&pd_lcd0>;
+ #iommu-cells = <0>;
+ };
};
};
};
- watchdog@10060000 {
- status = "okay";
- };
-
- rtc@10070000 {
- status = "okay";
- };
-
- tmu@100C0000 {
- status = "okay";
- };
-
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
- pinctrl-names = "default";
- vmmc-supply = <&mmc_reg>;
- status = "okay";
- };
-
- sdhci@12510000 {
- bus-width = <4>;
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
- pinctrl-names = "default";
- vmmc-supply = <&mmc_reg>;
- status = "okay";
- };
-
- g2d@12800000 {
- status = "okay";
- };
-
- codec@13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
- };
-
- serial@13800000 {
- status = "okay";
- };
-
- serial@13810000 {
- status = "okay";
- };
-
- serial@13820000 {
- status = "okay";
- };
-
- serial@13830000 {
- status = "okay";
- };
-
- i2c@13860000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- pinctrl-0 = <&i2c0_bus>;
- pinctrl-names = "default";
-
- max8997_pmic@66 {
- compatible = "maxim,max8997-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx0>;
- interrupts = <4 0>, <3 0>;
-
- max8997,pmic-buck1-dvs-voltage = <1350000>;
- max8997,pmic-buck2-dvs-voltage = <1100000>;
- max8997,pmic-buck5-dvs-voltage = <1200000>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ABB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_ALIVE_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VMIPI_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_RTC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VMIPI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_AUD_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VADC_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "DVDD_SWB_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_PLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_AUD_3V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "AVDD18_SWB_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDD_SWB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "VDD_MIF_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- /*
- * HACK: The real name is VDD_ARM_1.2V,
- * but exynos-cpufreq does not support
- * DT-based regulator lookup yet.
- */
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "VDD_INT_1.1V";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "VDD_G3D_1.1V";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDDQ_M1M2_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VDD_LCD_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
};
};
- fimd@11c00000 {
- pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
- pinctrl-names = "default";
- status = "okay";
- };
-
display-timings {
native-mode = <&timing0>;
timing0: timing {
};
};
};
+
+&fimd {
+ pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&g2d {
+ status = "okay";
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+
+ max8997_pmic@66 {
+ compatible = "maxim,max8997-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 0>, <3 0>;
+
+ max8997,pmic-buck1-dvs-voltage = <1350000>;
+ max8997,pmic-buck2-dvs-voltage = <1100000>;
+ max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VMIPI_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_RTC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_AUD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "DVDD_SWB_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_PLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_AUD_3V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "AVDD18_SWB_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDD_SWB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ /*
+ * HACK: The real name is VDD_ARM_1.2V,
+ * but exynos-cpufreq does not support
+ * DT-based regulator lookup yet.
+ */
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VDD_INT_1.1V";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VDD_G3D_1.1V";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDDQ_M1M2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VDD_LCD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+};
+
+&sdhci_0 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+};
+
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&tmu {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
stdout-path = &serial_1;
};
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- status = "okay";
- };
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <12000000>;
+ };
- g2d@12800000 {
- status = "okay";
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
};
+};
- codec@13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
- };
+&g2d {
+ status = "okay";
+};
- serial@13800000 {
- status = "okay";
- };
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
- serial@13810000 {
- status = "okay";
+ eeprom@50 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x50>;
};
- serial@13820000 {
- status = "okay";
+ eeprom@52 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x52>;
};
+};
- serial@13830000 {
- status = "okay";
+&keypad {
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ status = "okay";
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
};
- pinctrl@11000000 {
- keypad_rows: keypad-rows {
- samsung,pins = "gpx2-0", "gpx2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- keypad_cols: keypad-cols {
- samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
- "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
};
- keypad@100A0000 {
- samsung,keypad-num-rows = <2>;
- samsung,keypad-num-columns = <8>;
- linux,keypad-no-autorepeat;
- linux,keypad-wakeup;
- pinctrl-names = "default";
- pinctrl-0 = <&keypad_rows &keypad_cols>;
- status = "okay";
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
- key_1 {
- keypad,row = <0>;
- keypad,column = <3>;
- linux,code = <2>;
- };
+ key_4 {
+ keypad,row = <0>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
- key_2 {
- keypad,row = <0>;
- keypad,column = <4>;
- linux,code = <3>;
- };
+ key_5 {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
- key_3 {
- keypad,row = <0>;
- keypad,column = <5>;
- linux,code = <4>;
- };
+ key_a {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <30>;
+ };
- key_4 {
- keypad,row = <0>;
- keypad,column = <6>;
- linux,code = <5>;
- };
+ key_b {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <48>;
+ };
- key_5 {
- keypad,row = <0>;
- keypad,column = <7>;
- linux,code = <6>;
- };
+ key_c {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <46>;
+ };
- key_a {
- keypad,row = <1>;
- keypad,column = <3>;
- linux,code = <30>;
- };
+ key_d {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <32>;
+ };
- key_b {
- keypad,row = <1>;
- keypad,column = <4>;
- linux,code = <48>;
- };
+ key_e {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <18>;
+ };
+};
- key_c {
- keypad,row = <1>;
- keypad,column = <5>;
- linux,code = <46>;
- };
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+};
- key_d {
- keypad,row = <1>;
- keypad,column = <6>;
- linux,code = <32>;
- };
+&pinctrl_1 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
- key_e {
- keypad,row = <1>;
- keypad,column = <7>;
- linux,code = <18>;
- };
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+ "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
+};
- i2c@13860000 {
- #address-cells = <1>;
- #size-cells = <0>;
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <100000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,24ad0xd1";
- reg = <0x50>;
- };
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ status = "okay";
+};
- eeprom@52 {
- compatible = "samsung,24ad0xd1";
- reg = <0x52>;
- };
- };
+&serial_0 {
+ status = "okay";
+};
- spi_2: spi@13940000 {
- cs-gpios = <&gpc1 2 0>;
- status = "okay";
+&serial_1 {
+ status = "okay";
+};
- w25x80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+&serial_2 {
+ status = "okay";
+};
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
+&serial_3 {
+ status = "okay";
+};
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
+&spi_2 {
+ cs-gpios = <&gpc1 2 0>;
+ status = "okay";
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
- };
+ w25x80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
};
- };
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <12000000>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
};
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
};
};
- hsotg@12480000 {
- vusb_d-supply = <&vusb_reg>;
- vusb_a-supply = <&vusbdac_reg>;
- dr_mode = "peripheral";
- status = "okay";
- };
-
- sdhci_emmc: sdhci@12510000 {
- bus-width = <8>;
- non-removable;
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
- pinctrl-names = "default";
- vmmc-supply = <&vemmc_reg>;
- status = "okay";
- };
-
- exynos-usbphy@125B0000 {
- status = "okay";
- };
-
- serial@13800000 {
- status = "okay";
- };
-
- serial@13810000 {
- status = "okay";
- };
-
- serial@13820000 {
- status = "okay";
- };
-
- serial@13830000 {
- status = "okay";
- };
-
gpio-keys {
compatible = "gpio-keys";
};
};
- i2c@13890000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <400000>;
- pinctrl-0 = <&i2c3_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- mms114-touchscreen@48 {
- compatible = "melfas,mms114";
- reg = <0x48>;
- interrupt-parent = <&gpx0>;
- interrupts = <4 2>;
- x-size = <720>;
- y-size = <1280>;
- avdd-supply = <&tsp_reg>;
- vdd-supply = <&tsp_reg>;
- };
- };
-
- i2c@138B0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <100000>;
- pinctrl-0 = <&i2c5_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- max8997_pmic@66 {
- compatible = "maxim,max8997-pmic";
-
- reg = <0x66>;
-
- max8997,pmic-buck1-uses-gpio-dvs;
- max8997,pmic-buck2-uses-gpio-dvs;
- max8997,pmic-buck5-uses-gpio-dvs;
-
- max8997,pmic-ignore-gpiodvs-side-effect;
- max8997,pmic-buck125-default-dvs-idx = <0>;
-
- max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>,
- <&gpl0 0 0>;
-
- max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
- <1250000>, <1200000>,
- <1150000>, <1100000>,
- <1000000>, <950000>;
-
- max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
- <950000>, <900000>,
- <1100000>, <1000000>,
- <950000>, <900000>;
-
- max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>;
-
- regulators {
- valive_reg: LDO2 {
- regulator-name = "VALIVE_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- vusb_reg: LDO3 {
- regulator-name = "VUSB_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
-
- vmipi_reg: LDO4 {
- regulator-name = "VMIPI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vpda_reg: LDO6 {
- regulator-name = "VCC_1.8V_PDA";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcam_reg: LDO7 {
- regulator-name = "CAM_ISP_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vusbdac_reg: LDO8 {
- regulator-name = "VUSB/VDAC_3.3V_C210";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vccpda_reg: LDO9 {
- regulator-name = "VCC_2.8V_PDA";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- vpll_reg: LDO10 {
- regulator-name = "VPLL_1.1V_C210";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- vtcam_reg: LDO12 {
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vcclcd_reg: LDO13 {
- regulator-name = "VCC_3.3V_LCD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vlcd_reg: LDO15 {
- regulator-name = "VLCD_2.2V";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- };
-
- camsensor_reg: LDO16 {
- regulator-name = "CAM_SENSOR_IO_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vddq_reg: LDO21 {
- regulator-name = "VDDQ_M1M2_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- varm_breg: BUCK1 {
- /*
- * HACK: The real name is VARM_1.2V_C210,
- * but exynos-cpufreq does not support
- * DT-based regulator lookup yet.
- */
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- vint_breg: BUCK2 {
- regulator-name = "VINT_1.1V_C210";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- camisp_breg: BUCK4 {
- regulator-name = "CAM_ISP_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- vmem_breg: BUCK5 {
- regulator-name = "VMEM_1.2V_C210";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vccsub_breg: BUCK7 {
- regulator-name = "VCC_SUB_2.0V";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- safe1_sreg: ESAFEOUT1 {
- regulator-name = "SAFEOUT1";
- regulator-always-on;
- };
-
- safe2_sreg: ESAFEOUT2 {
- regulator-name = "SAFEOUT2";
- regulator-boot-on;
- };
- };
- };
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
};
};
- dsi_0: dsi@11C80000 {
- vddcore-supply = <&vusb_reg>;
- vddio-supply = <&vmipi_reg>;
- samsung,pll-clock-frequency = <24000000>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- remote-endpoint = <&dsi_in>;
- samsung,burst-clock-frequency = <500000000>;
- samsung,esc-clock-frequency = <20000000>;
- };
- };
- };
-
- panel@0 {
- reg = <0>;
- compatible = "samsung,s6e8aa0";
- vdd3-supply = <&vcclcd_reg>;
- vci-supply = <&vlcd_reg>;
- reset-gpios = <&gpy4 5 0>;
- power-on-delay= <50>;
- reset-delay = <100>;
- init-delay = <100>;
- flip-horizontal;
- flip-vertical;
- panel-width-mm = <58>;
- panel-height-mm = <103>;
-
- display-timings {
- timing-0 {
- clock-frequency = <57153600>;
- hactive = <720>;
- vactive = <1280>;
- hfront-porch = <5>;
- hback-porch = <5>;
- hsync-len = <5>;
- vfront-porch = <13>;
- vback-porch = <1>;
- vsync-len = <2>;
- };
- };
-
- port {
- dsi_in: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
- };
- };
-
- fimd@11c00000 {
- status = "okay";
- };
-
- tmu@100C0000 {
- status = "okay";
- };
-
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
};
};
};
+
+&dsi_0 {
+ vddcore-supply = <&vusb_reg>;
+ vddio-supply = <&vmipi_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ samsung,burst-clock-frequency = <500000000>;
+ samsung,esc-clock-frequency = <20000000>;
+ };
+ };
+ };
+
+ panel@0 {
+ reg = <0>;
+ compatible = "samsung,s6e8aa0";
+ vdd3-supply = <&vcclcd_reg>;
+ vci-supply = <&vlcd_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ power-on-delay= <50>;
+ reset-delay = <100>;
+ init-delay = <100>;
+ flip-horizontal;
+ flip-vertical;
+ panel-width-mm = <58>;
+ panel-height-mm = <103>;
+
+ display-timings {
+ timing-0 {
+ clock-frequency = <57153600>;
+ hactive = <720>;
+ vactive = <1280>;
+ hfront-porch = <5>;
+ hback-porch = <5>;
+ hsync-len = <5>;
+ vfront-porch = <13>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+
+ port {
+ dsi_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&exynos_usbphy {
+ status = "okay";
+};
+
+&fimd {
+ status = "okay";
+};
+
+&hsotg {
+ vusb_d-supply = <&vusb_reg>;
+ vusb_a-supply = <&vusbdac_reg>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&i2c_3 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mms114-touchscreen@48 {
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 2>;
+ x-size = <720>;
+ y-size = <1280>;
+ avdd-supply = <&tsp_reg>;
+ vdd-supply = <&tsp_reg>;
+ };
+};
+
+&i2c_5 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c5_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ max8997_pmic@66 {
+ compatible = "maxim,max8997-pmic";
+
+ reg = <0x66>;
+
+ max8997,pmic-buck1-uses-gpio-dvs;
+ max8997,pmic-buck2-uses-gpio-dvs;
+ max8997,pmic-buck5-uses-gpio-dvs;
+
+ max8997,pmic-ignore-gpiodvs-side-effect;
+ max8997,pmic-buck125-default-dvs-idx = <0>;
+
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
+ <&gpx0 6 0>,
+ <&gpl0 0 0>;
+
+ max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+ <950000>, <900000>,
+ <1100000>, <1000000>,
+ <950000>, <900000>;
+
+ max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ valive_reg: LDO2 {
+ regulator-name = "VALIVE_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ vusb_reg: LDO3 {
+ regulator-name = "VUSB_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vmipi_reg: LDO4 {
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vpda_reg: LDO6 {
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcam_reg: LDO7 {
+ regulator-name = "CAM_ISP_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vusbdac_reg: LDO8 {
+ regulator-name = "VUSB/VDAC_3.3V_C210";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vccpda_reg: LDO9 {
+ regulator-name = "VCC_2.8V_PDA";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ vpll_reg: LDO10 {
+ regulator-name = "VPLL_1.1V_C210";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ vtcam_reg: LDO12 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcclcd_reg: LDO13 {
+ regulator-name = "VCC_3.3V_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vlcd_reg: LDO15 {
+ regulator-name = "VLCD_2.2V";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ camsensor_reg: LDO16 {
+ regulator-name = "CAM_SENSOR_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddq_reg: LDO21 {
+ regulator-name = "VDDQ_M1M2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ varm_breg: BUCK1 {
+ /*
+ * HACK: The real name is VARM_1.2V_C210,
+ * but exynos-cpufreq does not support
+ * DT-based regulator lookup yet.
+ */
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vint_breg: BUCK2 {
+ regulator-name = "VINT_1.1V_C210";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ camisp_breg: BUCK4 {
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vmem_breg: BUCK5 {
+ regulator-name = "VMEM_1.2V_C210";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vccsub_breg: BUCK7 {
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ safe1_sreg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ regulator-always-on;
+ };
+
+ safe2_sreg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&sdhci_0 {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vemmc_reg>;
+ status = "okay";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&tmu {
+ status = "okay";
+};
};
};
- pmu_system_controller: system-controller@10020000 {
- clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
- "clkout4", "clkout8", "clkout9";
- clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
- <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
- <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
- <&clock CLK_XUSBXTI>;
- #clock-cells = <1>;
- };
-
- sysram@02020000 {
+ sysram: sysram@02020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x20000>;
#address-cells = <1>;
arm,data-latency = <2 2 1>;
};
- gic: interrupt-controller@10490000 {
- cpu-offset = <0x8000>;
- };
-
- combiner: interrupt-controller@10440000 {
- samsung,combiner-nr = <16>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
- };
-
- mct@10050000 {
+ mct: mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
interrupt-parent = <&mct_map>;
};
};
- g2d@12800000 {
+ g2d: g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
interrupts = <0 89 0>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
+ iommus = <&sysmmu_g2d>;
status = "disabled";
};
clock-names = "ppmu";
status = "disabled";
};
+
+ sysmmu_g2d: sysmmu@12A20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12A20000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 7>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+ power-domains = <&pd_lcd0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimd1: sysmmu@12220000 {
+ compatible = "samsung,exynos-sysmmu";
+ interrupt-parent = <&combiner>;
+ reg = <0x12220000 0x1000>;
+ interrupts = <5 3>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+ power-domains = <&pd_lcd1>;
+ #iommu-cells = <0>;
+ };
+};
+
+&gic {
+ cpu-offset = <0x8000>;
+};
+
+&combiner {
+ samsung,combiner-nr = <16>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+};
+
+&pmu_system_controller {
+ clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+ "clkout4", "clkout8", "clkout9";
+ clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+ <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+ <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+ #clock-cells = <1>;
};
reg = <0xA01>;
};
};
+};
- combiner: interrupt-controller@10440000 {
- samsung,combiner-nr = <18>;
- };
+&combiner {
+ samsung,combiner-nr = <18>;
+};
- gic: interrupt-controller@10490000 {
- cpu-offset = <0x8000>;
- };
+&gic {
+ cpu-offset = <0x8000>;
};
};
};
- i2s0: i2s@03830000 {
- pinctrl-0 = <&i2s0_bus>;
- pinctrl-names = "default";
- status = "okay";
- clocks = <&clock_audss EXYNOS_I2S_BUS>,
- <&clock_audss EXYNOS_DOUT_AUD_BUS>,
- <&clock_audss EXYNOS_SCLK_I2S>;
- clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
- };
-
sound: sound {
compatible = "simple-audio-card";
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
reset-gpios = <&gpk1 2 1>;
};
- mmc@12550000 {
- pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
- pinctrl-names = "default";
- vmmc-supply = <&ldo20_reg &buck8_reg>;
- mmc-pwrseq = <&emmc_pwrseq>;
- status = "okay";
-
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- watchdog@10060000 {
- status = "okay";
- };
-
- rtc@10070000 {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
- clock-names = "rtc", "rtc_src";
- };
-
- g2d@10800000 {
- status = "okay";
- };
-
camera {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <>;
+ };
- fimc_0: fimc@11800000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC0>,
- <&clock CLK_SCLK_FIMC0>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
- };
-
- fimc_1: fimc@11810000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC1>,
- <&clock CLK_SCLK_FIMC1>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
};
- fimc_2: fimc@11820000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC2>,
- <&clock CLK_SCLK_FIMC2>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
};
+ };
- fimc_3: fimc@11830000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC3>,
- <&clock CLK_SCLK_FIMC3>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 7 7>;
+ };
+ map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 13 13>;
+ };
+ };
};
};
+};
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- pinctrl-names = "default";
- vmmc-supply = <&ldo4_reg &ldo21_reg>;
- cd-gpios = <&gpk2 2 0>;
- cd-inverted;
- status = "okay";
- };
+/* RSTN signal for eMMC */
+&sd1_cd {
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+};
- serial@13800000 {
- status = "okay";
+&pinctrl_1 {
+ gpio_power_key: power_key {
+ samsung,pins = "gpx1-3";
+ samsung,pin-pud = <0>;
};
- serial@13810000 {
- status = "okay";
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <0>;
- };
-
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
- };
+ hdmi_hpd: hdmi-hpd {
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <1>;
};
+};
- i2c@13860000 {
- pinctrl-0 = <&i2c0_bus>;
- pinctrl-names = "default";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <400000>;
- status = "okay";
+&ehci {
+ status = "okay";
+};
- usb3503: usb3503@08 {
- compatible = "smsc,usb3503";
- reg = <0x08>;
+&exynos_usbphy {
+ status = "okay";
+};
- intn-gpios = <&gpx3 0 0>;
- connect-gpios = <&gpx3 4 0>;
- reset-gpios = <&gpx3 5 0>;
- initial-mode = <1>;
- };
+&fimc_0 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
- max77686: pmic@09 {
- compatible = "maxim,max77686";
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&max77686_irq>;
- reg = <0x09>;
- #clock-cells = <1>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
+&fimc_1 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+ <&clock CLK_SCLK_FIMC1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_M1_2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+&fimc_2 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+ <&clock CLK_SCLK_FIMC2>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
- ldo3_reg: LDO3 {
- regulator-name = "VDDQ_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+&fimc_3 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+ <&clock CLK_SCLK_FIMC3>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
- ldo4_reg: LDO4 {
- regulator-name = "VDDQ_MMC2_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
+&g2d {
+ status = "okay";
+};
- ldo5_reg: LDO5 {
- regulator-name = "VDDQ_MMC1_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
+&hdmi {
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ ddc = <&i2c_2>;
+ status = "okay";
+};
- ldo6_reg: LDO6 {
- regulator-name = "VDD10_MPLL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
+&hsotg {
+ dr_mode = "peripheral";
+ status = "okay";
+ vusb_d-supply = <&ldo15_reg>;
+ vusb_a-supply = <&ldo12_reg>;
+};
- ldo7_reg: LDO7 {
- regulator-name = "VDD10_XPLL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
+&i2c_0 {
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
+ status = "okay";
+
+ usb3503: usb3503@08 {
+ compatible = "smsc,usb3503";
+ reg = <0x08>;
+
+ intn-gpios = <&gpx3 0 0>;
+ connect-gpios = <&gpx3 4 0>;
+ reset-gpios = <&gpx3 5 0>;
+ initial-mode = <1>;
+ };
- ldo8_reg: ldo@8 {
- regulator-compatible = "LDO8";
- regulator-name = "VDD10_HDMI_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
+ max77686: pmic@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- ldo10_reg: ldo@10 {
- regulator-compatible = "LDO10";
- regulator-name = "VDDQ_MIPIHSI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M1_2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- ldo11_reg: LDO11 {
- regulator-name = "VDD18_ABB1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDQ_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- ldo12_reg: LDO12 {
- regulator-name = "VDD33_USB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_MMC2_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo5_reg: LDO5 {
+ regulator-name = "VDDQ_MMC1_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_HSIC_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo8_reg: ldo@8 {
+ regulator-compatible = "LDO8";
+ regulator-name = "VDD10_HDMI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
- ldo20_reg: LDO20 {
- regulator-name = "LDO20_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
+ ldo10_reg: ldo@10 {
+ regulator-compatible = "LDO10";
+ regulator-name = "VDDQ_MIPIHSI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- ldo21_reg: LDO21 {
- regulator-name = "LDO21_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- ldo25_reg: LDO25 {
- regulator-name = "VDDQ_LCD_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_USB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_HSIC_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-microvolt-offset = <50000>;
- };
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- buck5_reg: BUCK5 {
- regulator-name = "VDDQ_CKEM1_2_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo20_reg: LDO20 {
+ regulator-name = "LDO20_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
- buck6_reg: BUCK6 {
- regulator-name = "BUCK6_1.35V";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo21_reg: LDO21 {
+ regulator-name = "LDO21_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- buck7_reg: BUCK7 {
- regulator-name = "BUCK7_2.0V";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
+ ldo25_reg: LDO25 {
+ regulator-name = "VDDQ_LCD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- buck8_reg: BUCK8 {
- regulator-name = "BUCK8_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
};
- };
- };
- i2c@13870000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_bus>;
- status = "okay";
- max98090: max98090@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpx0>;
- interrupts = <0 0>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- };
- };
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- exynos-usbphy@125B0000 {
- status = "okay";
- };
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- hsotg@12480000 {
- dr_mode = "peripheral";
- status = "okay";
- vusb_d-supply = <&ldo15_reg>;
- vusb_a-supply = <&ldo12_reg>;
- };
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-microvolt-offset = <50000>;
+ };
- ehci: ehci@12580000 {
- status = "okay";
- };
+ buck5_reg: BUCK5 {
+ regulator-name = "VDDQ_CKEM1_2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- tmu@100C0000 {
- vtmu-supply = <&ldo10_reg>;
- status = "okay";
- };
+ buck6_reg: BUCK6 {
+ regulator-name = "BUCK6_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- thermal-zones {
- cpu_thermal: cpu-thermal {
- cooling-maps {
- map0 {
- /* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 7 7>;
- };
- map1 {
- /* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 13 13>;
- };
- };
+ buck7_reg: BUCK7 {
+ regulator-name = "BUCK7_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "BUCK8_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
};
};
+};
- mixer: mixer@12C10000 {
- status = "okay";
+&i2c_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+ status = "okay";
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <0 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
};
+};
- hdmi@12D00000 {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- ddc = <&hdmi_ddc>;
- status = "okay";
- };
+&i2c_2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+};
- hdmi_ddc: i2c@13880000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_bus>;
- };
+&i2c_8 {
+ status = "okay";
+};
- i2c@138E0000 {
- status = "okay";
- };
+&i2s0 {
+ pinctrl-0 = <&i2s0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};
-/* RSTN signal for eMMC */
-&sd1_cd {
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+&mixer {
+ status = "okay";
};
-&pinctrl_1 {
- gpio_power_key: power_key {
- samsung,pins = "gpx1-3";
- samsung,pin-pud = <0>;
- };
+&mshc_0 {
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo20_reg &buck8_reg>;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ status = "okay";
+
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
- max77686_irq: max77686-irq {
- samsung,pins = "gpx3-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
- hdmi_hpd: hdmi-hpd {
- samsung,pins = "gpx3-7";
- samsung,pin-pud = <1>;
- };
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo4_reg &ldo21_reg>;
+ cd-gpios = <&gpk2 2 0>;
+ cd-inverted;
+ status = "okay";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&tmu {
+ vtmu-supply = <&ldo10_reg>;
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
};
};
};
- serial@13820000 {
- status = "okay";
- };
-
- serial@13830000 {
- status = "okay";
- };
-
gpio_keys {
pinctrl-0 = <&gpio_power_key &gpio_home_key>;
samsung,pin-pud = <0>;
};
};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
};
};
- watchdog@10060000 {
- status = "okay";
- };
-
- rtc@10070000 {
- status = "okay";
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <47500000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <64>;
+ hback-porch = <16>;
+ hsync-len = <48>;
+ vback-porch = <64>;
+ vfront-porch = <16>;
+ vsync-len = <3>;
+ };
};
- pinctrl@11000000 {
- keypad_rows: keypad-rows {
- samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
};
- keypad_cols: keypad-cols {
- samsung,pins = "gpx1-0", "gpx1-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
};
};
+};
- keypad@100A0000 {
- samsung,keypad-num-rows = <3>;
- samsung,keypad-num-columns = <2>;
- linux,keypad-no-autorepeat;
- linux,keypad-wakeup;
- pinctrl-0 = <&keypad_rows &keypad_cols>;
- pinctrl-names = "default";
- status = "okay";
-
- key_home {
- keypad,row = <0>;
- keypad,column = <0>;
- linux,code = <KEY_HOME>;
- };
+&fimd {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
- key_down {
- keypad,row = <0>;
- keypad,column = <1>;
- linux,code = <KEY_DOWN>;
- };
+&g2d {
+ status = "okay";
+};
- key_up {
- keypad,row = <1>;
- keypad,column = <0>;
- linux,code = <KEY_UP>;
- };
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+ <&gpx2 4 0>,
+ <&gpx2 5 0>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+ <&gpm3 6 0>,
+ <&gpm3 7 0>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
- key_menu {
- keypad,row = <1>;
- keypad,column = <1>;
- linux,code = <KEY_MENU>;
- };
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
- key_back {
- keypad,row = <2>;
- keypad,column = <0>;
- linux,code = <KEY_BACK>;
- };
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDIOAP_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_PRE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD18_2M";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD10_MIPI";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD33_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD18_MIPI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_UOTG";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDIOPERI_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB02";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_USH";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDIOAP_MMC012_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDDIOPERI_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "DVDD25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD28_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD28_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDDA28_2M";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
- key_enter {
- keypad,row = <2>;
- keypad,column = <1>;
- linux,code = <KEY_ENTER>;
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD28_TF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD33_A31";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDD18_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD18_A31";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "GPS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "DVDD12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_m12";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd12_5m";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vddf28_emmc";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
};
};
+};
- g2d@10800000 {
- status = "okay";
+&keypad {
+ samsung,keypad-num-rows = <3>;
+ samsung,keypad-num-columns = <2>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ key_home {
+ keypad,row = <0>;
+ keypad,column = <0>;
+ linux,code = <KEY_HOME>;
};
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
- pinctrl-names = "default";
- vmmc-supply = <&mmc_reg>;
- status = "okay";
+ key_down {
+ keypad,row = <0>;
+ keypad,column = <1>;
+ linux,code = <KEY_DOWN>;
};
- mmc@12550000 {
- pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
- pinctrl-names = "default";
- status = "okay";
-
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- bus-width = <8>;
- cap-mmc-highspeed;
+ key_up {
+ keypad,row = <1>;
+ keypad,column = <0>;
+ linux,code = <KEY_UP>;
};
- codec@13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
+ key_menu {
+ keypad,row = <1>;
+ keypad,column = <1>;
+ linux,code = <KEY_MENU>;
};
- fimd@11c00000 {
- pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
- pinctrl-names = "default";
- status = "okay";
+ key_back {
+ keypad,row = <2>;
+ keypad,column = <0>;
+ linux,code = <KEY_BACK>;
};
- display-timings {
- native-mode = <&timing0>;
- timing0: timing {
- clock-frequency = <47500000>;
- hactive = <1024>;
- vactive = <600>;
- hfront-porch = <64>;
- hback-porch = <16>;
- hsync-len = <48>;
- vback-porch = <64>;
- vfront-porch = <16>;
- vsync-len = <3>;
- };
+ key_enter {
+ keypad,row = <2>;
+ keypad,column = <1>;
+ linux,code = <KEY_ENTER>;
};
+};
- serial@13800000 {
- status = "okay";
- };
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+};
- serial@13810000 {
- status = "okay";
- };
+&mshc_0 {
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
- serial@13820000 {
- status = "okay";
+&pinctrl_1 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
- serial@13830000 {
- status = "okay";
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
+};
- i2c@13860000 {
- #address-cells = <1>;
- #size-cells = <0>;
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- pinctrl-0 = <&i2c0_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
-
- s5m8767,pmic-buck-default-dvs-idx = <3>;
-
- s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
-
- s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
- <&gpm3 6 0>,
- <&gpm3 7 0>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>;
-
- s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
- <1100000>, <1100000>,
- <1100000>, <1100000>,
- <1100000>, <1100000>;
-
- s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_M12";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDDIOAP_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDDQ_PRE";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD18_2M";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD10_MPLL";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD10_XPLL";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD10_MIPI";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD33_LCD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD18_MIPI";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD18_ABB1";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD33_UOTG";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDIOPERI_18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB02";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_USH";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDIOAP_MMC012_28";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDDIOPERI_28";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "DVDD25";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "VDD28_CAM";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "VDD28_AF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "VDDA28_2M";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "VDD28_TF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "VDD33_A31";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "VDD18_CAM";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "VDD18_A31";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "GPS_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "DVDD12";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_m12";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd12_5m";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vddf28_emmc";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
- };
- };
- };
+&rtc {
+ status = "okay";
+};
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <0>;
- };
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+};
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
- };
- };
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
};
stdout-path = &serial_1;
};
- g2d@10800000 {
- status = "okay";
- };
-
- pinctrl@11000000 {
- keypad_rows: keypad-rows {
- samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
};
- keypad_cols: keypad-cols {
- samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
- "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
};
};
+};
- keypad@100A0000 {
- samsung,keypad-num-rows = <3>;
- samsung,keypad-num-columns = <8>;
- linux,keypad-no-autorepeat;
- linux,keypad-wakeup;
- pinctrl-0 = <&keypad_rows &keypad_cols>;
- pinctrl-names = "default";
- status = "okay";
-
- key_1 {
- keypad,row = <1>;
- keypad,column = <3>;
- linux,code = <2>;
- };
-
- key_2 {
- keypad,row = <1>;
- keypad,column = <4>;
- linux,code = <3>;
- };
-
- key_3 {
- keypad,row = <1>;
- keypad,column = <5>;
- linux,code = <4>;
- };
-
- key_4 {
- keypad,row = <1>;
- keypad,column = <6>;
- linux,code = <5>;
- };
+&g2d {
+ status = "okay";
+};
- key_5 {
- keypad,row = <1>;
- keypad,column = <7>;
- linux,code = <6>;
- };
+&keypad {
+ samsung,keypad-num-rows = <3>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ key_1 {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <2>;
+ };
- key_A {
- keypad,row = <2>;
- keypad,column = <6>;
- linux,code = <30>;
- };
+ key_2 {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <3>;
+ };
- key_B {
- keypad,row = <2>;
- keypad,column = <7>;
- linux,code = <48>;
- };
+ key_3 {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
- key_C {
- keypad,row = <0>;
- keypad,column = <5>;
- linux,code = <46>;
- };
+ key_4 {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
- key_D {
- keypad,row = <2>;
- keypad,column = <5>;
- linux,code = <32>;
- };
+ key_5 {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
- key_E {
- keypad,row = <0>;
- keypad,column = <7>;
- linux,code = <18>;
- };
+ key_A {
+ keypad,row = <2>;
+ keypad,column = <6>;
+ linux,code = <30>;
};
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
- pinctrl-names = "default";
- status = "okay";
+ key_B {
+ keypad,row = <2>;
+ keypad,column = <7>;
+ linux,code = <48>;
};
- codec@13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
+ key_C {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <46>;
};
- serial@13800000 {
- status = "okay";
+ key_D {
+ keypad,row = <2>;
+ keypad,column = <5>;
+ linux,code = <32>;
};
- serial@13810000 {
- status = "okay";
+ key_E {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <18>;
};
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+};
- serial@13820000 {
- status = "okay";
+&pinctrl_1 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
- serial@13830000 {
- status = "okay";
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+ "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
};
+};
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <0>;
- };
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+};
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
- };
- };
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
};
};
};
- rtc@10070000 {
- status = "okay";
- };
-
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@13800000 {
- status = "okay";
- };
-
- serial@13810000 {
- status = "okay";
- };
-
- serial@13820000 {
- status = "okay";
- };
-
- serial@13830000 {
- status = "okay";
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
};
};
};
+
+&rtc {
+ status = "okay";
+};
+
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77686.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
};
};
- adc: adc@126C0000 {
- vdd-supply = <&ldo3_reg>;
- status = "okay";
- };
-
- i2c@13890000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <400000>;
- pinctrl-0 = <&i2c3_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- mms114-touchscreen@48 {
- compatible = "melfas,mms114";
- reg = <0x48>;
- interrupt-parent = <&gpm2>;
- interrupts = <3 2>;
- x-size = <720>;
- y-size = <1280>;
- avdd-supply = <&ldo23_reg>;
- vdd-supply = <&ldo24_reg>;
- };
- };
-
- i2c_0: i2c@13860000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <400000>;
- pinctrl-0 = <&i2c0_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- s5c73m3@3c {
- compatible = "samsung,s5c73m3";
- reg = <0x3c>;
- standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
- xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
- vdd-int-supply = <&buck9_reg>;
- vddio-cis-supply = <&ldo9_reg>;
- vdda-supply = <&ldo17_reg>;
- vddio-host-supply = <&ldo18_reg>;
- vdd-af-supply = <&cam_af_reg>;
- vdd-reg-supply = <&cam_io_reg>;
- clock-frequency = <24000000>;
- /* CAM_A_CLKOUT */
- clocks = <&camera 0>;
- clock-names = "cis_extclk";
- port {
- s5c73m3_ep: endpoint {
- remote-endpoint = <&csis0_ep>;
- data-lanes = <1 2 3 4>;
- };
- };
- };
- };
-
- i2c@138A0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <100000>;
- pinctrl-0 = <&i2c4_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- wm1811: wm1811@1a {
- compatible = "wlf,wm1811";
- reg = <0x1a>;
- clocks = <&pmu_system_controller 0>;
- clock-names = "MCLK1";
- DCVDD-supply = <&ldo3_reg>;
- DBVDD1-supply = <&ldo3_reg>;
- wlf,ldo1ena = <&gpj0 4 0>;
- };
- };
-
- i2c@138D0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-slave-addr = <0x10>;
- samsung,i2c-max-bus-freq = <100000>;
- pinctrl-0 = <&i2c7_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- max77686_pmic@09 {
- compatible = "maxim,max77686";
- interrupt-parent = <&gpx0>;
- interrupts = <7 0>;
- reg = <0x09>;
- #clock-cells = <1>;
-
- voltage-regulators {
- ldo1_reg: ldo1 {
- regulator-compatible = "LDO1";
- regulator-name = "VALIVE_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: ldo2 {
- regulator-compatible = "LDO2";
- regulator-name = "VM1M2_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- ldo3_reg: ldo3 {
- regulator-compatible = "LDO3";
- regulator-name = "VCC_1.8V_AP";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: ldo4 {
- regulator-compatible = "LDO4";
- regulator-name = "VCC_2.8V_AP";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo5_reg: ldo5 {
- regulator-compatible = "LDO5";
- regulator-name = "VCC_1.8V_IO";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: ldo6 {
- regulator-compatible = "LDO6";
- regulator-name = "VMPLL_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- ldo7_reg: ldo7 {
- regulator-compatible = "LDO7";
- regulator-name = "VPLL_1.0V_AP";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- ldo8_reg: ldo8 {
- regulator-compatible = "LDO8";
- regulator-name = "VMIPI_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo9_reg: ldo9 {
- regulator-compatible = "LDO9";
- regulator-name = "CAM_ISP_MIPI_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo10_reg: ldo10 {
- regulator-compatible = "LDO10";
- regulator-name = "VMIPI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo11_reg: ldo11 {
- regulator-compatible = "LDO11";
- regulator-name = "VABB1_1.95V";
- regulator-min-microvolt = <1950000>;
- regulator-max-microvolt = <1950000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo12_reg: ldo12 {
- regulator-compatible = "LDO12";
- regulator-name = "VUOTG_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo13_reg: ldo13 {
- regulator-compatible = "LDO13";
- regulator-name = "NFC_AVDD_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo14_reg: ldo14 {
- regulator-compatible = "LDO14";
- regulator-name = "VABB2_1.95V";
- regulator-min-microvolt = <1950000>;
- regulator-max-microvolt = <1950000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- ldo15_reg: ldo15 {
- regulator-compatible = "LDO15";
- regulator-name = "VHSIC_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- ldo16_reg: ldo16 {
- regulator-compatible = "LDO16";
- regulator-name = "VHSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- ldo17_reg: ldo17 {
- regulator-compatible = "LDO17";
- regulator-name = "CAM_SENSOR_CORE_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo18_reg: ldo18 {
- regulator-compatible = "LDO18";
- regulator-name = "CAM_ISP_SEN_IO_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: ldo19 {
- regulator-compatible = "LDO19";
- regulator-name = "VT_CAM_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo20_reg: ldo20 {
- regulator-compatible = "LDO20";
- regulator-name = "VDDQ_PRE_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo21_reg: ldo21 {
- regulator-compatible = "LDO21";
- regulator-name = "VTF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
- };
-
- ldo22_reg: ldo22 {
- regulator-compatible = "LDO22";
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
- };
-
- ldo23_reg: ldo23 {
- regulator-compatible = "LDO23";
- regulator-name = "TSP_AVDD_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo24_reg: ldo24 {
- regulator-compatible = "LDO24";
- regulator-name = "TSP_VDD_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo25_reg: ldo25 {
- regulator-compatible = "LDO25";
- regulator-name = "LCD_VCC_3.3V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo26_reg: ldo26 {
- regulator-compatible = "LDO26";
- regulator-name = "MOTOR_VCC_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- buck1_reg: buck1 {
- regulator-compatible = "BUCK1";
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck2_reg: buck2 {
- regulator-compatible = "BUCK2";
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- buck3_reg: buck3 {
- regulator-compatible = "BUCK3";
- regulator-name = "vdd_int";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1150000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck4_reg: buck4 {
- regulator-compatible = "BUCK4";
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1150000>;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- buck5_reg: buck5 {
- regulator-compatible = "BUCK5";
- regulator-name = "VMEM_1.2V_AP";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck6_reg: buck6 {
- regulator-compatible = "BUCK6";
- regulator-name = "VCC_SUB_1.35V";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck7_reg: buck7 {
- regulator-compatible = "BUCK7";
- regulator-name = "VCC_SUB_2.0V";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck8_reg: buck8 {
- regulator-compatible = "BUCK8";
- regulator-name = "VMEM_VDDF_3.0V";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
- };
-
- buck9_reg: buck9 {
- regulator-compatible = "BUCK9";
- regulator-name = "CAM_ISP_CORE_1.2V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1200000>;
- maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
- };
- };
- };
- };
-
i2c_max77693: i2c-gpio-1 {
compatible = "i2c-gpio";
gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
};
};
- mmc@12550000 {
- num-slots = <1>;
- broken-cd;
- non-removable;
- card-detect-delay = <200>;
- vmmc-supply = <&ldo22_reg>;
- clock-frequency = <400000000>;
- samsung,dw-mshc-ciu-div = <0>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
- pinctrl-names = "default";
- status = "okay";
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- sdhci@12530000 {
- bus-width = <4>;
- cd-gpios = <&gpx3 4 0>;
- cd-inverted;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
- pinctrl-names = "default";
- vmmc-supply = <&ldo21_reg>;
- status = "okay";
- };
-
- serial@13800000 {
- status = "okay";
- };
-
- serial@13810000 {
- status = "okay";
- };
-
- serial@13820000 {
- status = "okay";
- };
-
- serial@13830000 {
- status = "okay";
- };
-
- tmu@100C0000 {
- vtmu-supply = <&ldo10_reg>;
- status = "okay";
- };
-
i2c_ak8975: i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&gpy2 4 0>, <&gpy2 5 0>;
};
};
- spi_1: spi@13930000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_bus>;
- cs-gpios = <&gpb 5 0>;
- status = "okay";
-
- s5c73m3_spi: s5c73m3 {
- compatible = "samsung,s5c73m3";
- spi-max-frequency = <50000000>;
- reg = <0>;
- controller-data {
- samsung,spi-feedback-delay = <2>;
- };
- };
- };
-
- pwm: pwm@139D0000 {
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- samsung,pwm-outputs = <0>;
- status = "okay";
- };
-
- dsi_0: dsi@11C80000 {
- vddcore-supply = <&ldo8_reg>;
- vddio-supply = <&ldo10_reg>;
- samsung,pll-clock-frequency = <24000000>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
-
- dsi_out: endpoint {
- remote-endpoint = <&dsi_in>;
- samsung,burst-clock-frequency = <500000000>;
- samsung,esc-clock-frequency = <20000000>;
- };
- };
- };
-
- panel@0 {
- compatible = "samsung,s6e8aa0";
- reg = <0>;
- vdd3-supply = <&lcd_vdd3_reg>;
- vci-supply = <&ldo25_reg>;
- reset-gpios = <&gpy4 5 0>;
- power-on-delay= <50>;
- reset-delay = <100>;
- init-delay = <100>;
- flip-horizontal;
- flip-vertical;
- panel-width-mm = <58>;
- panel-height-mm = <103>;
-
- display-timings {
- timing-0 {
- clock-frequency = <57153600>;
- hactive = <720>;
- vactive = <1280>;
- hfront-porch = <5>;
- hback-porch = <5>;
- hsync-len = <5>;
- vfront-porch = <13>;
- vback-porch = <1>;
- vsync-len = <2>;
- };
- };
-
- port {
- dsi_in: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
- };
- };
-
- fimd@11c00000 {
- status = "okay";
- };
-
camera: camera {
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
assigned-clock-parents = <&clock CLK_XUSBXTI>,
<&clock CLK_XUSBXTI>;
- fimc_0: fimc@11800000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC0>,
- <&clock CLK_SCLK_FIMC0>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
- };
-
- fimc_1: fimc@11810000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC1>,
- <&clock CLK_SCLK_FIMC1>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
- };
-
- fimc_2: fimc@11820000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC2>,
- <&clock CLK_SCLK_FIMC2>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
- };
-
- fimc_3: fimc@11830000 {
- status = "okay";
- assigned-clocks = <&clock CLK_MOUT_FIMC3>,
- <&clock CLK_SCLK_FIMC3>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
- };
-
- csis_0: csis@11880000 {
- status = "okay";
- vddcore-supply = <&ldo8_reg>;
- vddio-supply = <&ldo10_reg>;
- assigned-clocks = <&clock CLK_MOUT_CSIS0>,
- <&clock CLK_SCLK_CSIS0>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
-
- /* Camera C (3) MIPI CSI-2 (CSIS0) */
- port@3 {
- reg = <3>;
- csis0_ep: endpoint {
- remote-endpoint = <&s5c73m3_ep>;
- data-lanes = <1 2 3 4>;
- samsung,csis-hs-settle = <12>;
- };
- };
- };
-
- csis_1: csis@11890000 {
- status = "okay";
- vddcore-supply = <&ldo8_reg>;
- vddio-supply = <&ldo10_reg>;
- assigned-clocks = <&clock CLK_MOUT_CSIS1>,
- <&clock CLK_SCLK_CSIS1>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
- assigned-clock-rates = <0>, <176000000>;
-
- /* Camera D (4) MIPI CSI-2 (CSIS1) */
- port@4 {
- reg = <4>;
- csis1_ep: endpoint {
- remote-endpoint = <&is_s5k6a3_ep>;
- data-lanes = <1>;
- samsung,csis-hs-settle = <18>;
- samsung,csis-wclk;
- };
- };
- };
-
- fimc_lite_0: fimc-lite@12390000 {
- status = "okay";
- };
-
- fimc_lite_1: fimc-lite@123A0000 {
- status = "okay";
- };
- fimc-is@12000000 {
- pinctrl-0 = <&fimc_is_uart>;
- pinctrl-names = "default";
- status = "okay";
-
- i2c1_isp: i2c-isp@12140000 {
- pinctrl-0 = <&fimc_is_i2c1>;
- pinctrl-names = "default";
-
- s5k6a3@10 {
- compatible = "samsung,s5k6a3";
- reg = <0x10>;
- svdda-supply = <&cam_io_reg>;
- svddio-supply = <&ldo19_reg>;
- afvdd-supply = <&ldo19_reg>;
- clock-frequency = <24000000>;
- /* CAM_B_CLKOUT */
- clocks = <&camera 1>;
- clock-names = "extclk";
- samsung,camclk-out = <1>;
- gpios = <&gpm1 6 0>;
-
- port {
- is_s5k6a3_ep: endpoint {
- remote-endpoint = <&csis1_ep>;
- data-lanes = <1>;
- };
- };
- };
- };
- };
- };
-
- i2s0: i2s@03830000 {
- pinctrl-0 = <&i2s0_bus>;
- pinctrl-names = "default";
- status = "okay";
};
sound {
"SPK", "SPKOUTRP";
};
- exynos-usbphy@125B0000 {
- status = "okay";
- };
-
- hsotg@12480000 {
- vusb_d-supply = <&ldo15_reg>;
- vusb_a-supply = <&ldo12_reg>;
- dr_mode = "peripheral";
- status = "okay";
- };
-
thermistor-ap@0 {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
};
};
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+};
+
+&csis_0 {
+ status = "okay";
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+ <&clock CLK_SCLK_CSIS0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+
+ /* Camera C (3) MIPI CSI-2 (CSIS0) */
+ port@3 {
+ reg = <3>;
+ csis0_ep: endpoint {
+ remote-endpoint = <&s5c73m3_ep>;
+ data-lanes = <1 2 3 4>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+};
+
+&csis_1 {
+ status = "okay";
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+ <&clock CLK_SCLK_CSIS1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+
+ /* Camera D (4) MIPI CSI-2 (CSIS1) */
+ port@4 {
+ reg = <4>;
+ csis1_ep: endpoint {
+ remote-endpoint = <&is_s5k6a3_ep>;
+ data-lanes = <1>;
+ samsung,csis-hs-settle = <18>;
+ samsung,csis-wclk;
+ };
+ };
+};
+
+&dsi_0 {
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ samsung,burst-clock-frequency = <500000000>;
+ samsung,esc-clock-frequency = <20000000>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "samsung,s6e8aa0";
+ reg = <0>;
+ vdd3-supply = <&lcd_vdd3_reg>;
+ vci-supply = <&ldo25_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ power-on-delay= <50>;
+ reset-delay = <100>;
+ init-delay = <100>;
+ flip-horizontal;
+ flip-vertical;
+ panel-width-mm = <58>;
+ panel-height-mm = <103>;
+
+ display-timings {
+ timing-0 {
+ clock-frequency = <57153600>;
+ hactive = <720>;
+ vactive = <1280>;
+ hfront-porch = <5>;
+ hback-porch = <5>;
+ hsync-len = <5>;
+ vfront-porch = <13>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+
+ port {
+ dsi_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
+&exynos_usbphy {
+ status = "okay";
+};
+
+&fimc_0 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_1 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+ <&clock CLK_SCLK_FIMC1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_2 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+ <&clock CLK_SCLK_FIMC2>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_3 {
+ status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+ <&clock CLK_SCLK_FIMC3>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_is {
+ pinctrl-0 = <&fimc_is_uart>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ i2c1_isp: i2c-isp@12140000 {
+ pinctrl-0 = <&fimc_is_i2c1>;
+ pinctrl-names = "default";
+
+ s5k6a3@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+ afvdd-supply = <&ldo19_reg>;
+ clock-frequency = <24000000>;
+ /* CAM_B_CLKOUT */
+ clocks = <&camera 1>;
+ clock-names = "extclk";
+ samsung,camclk-out = <1>;
+ gpios = <&gpm1 6 0>;
+
+ port {
+ is_s5k6a3_ep: endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
+};
+
+&fimc_lite_0 {
+ status = "okay";
+};
+
+&fimc_lite_1 {
+ status = "okay";
+};
+
+&fimd {
+ status = "okay";
+};
+
+&hsotg {
+ vusb_d-supply = <&ldo15_reg>;
+ vusb_a-supply = <&ldo12_reg>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&i2c_0 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5c73m3@3c {
+ compatible = "samsung,s5c73m3";
+ reg = <0x3c>;
+ standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
+ xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+ vdd-int-supply = <&buck9_reg>;
+ vddio-cis-supply = <&ldo9_reg>;
+ vdda-supply = <&ldo17_reg>;
+ vddio-host-supply = <&ldo18_reg>;
+ vdd-af-supply = <&cam_af_reg>;
+ vdd-reg-supply = <&cam_io_reg>;
+ clock-frequency = <24000000>;
+ /* CAM_A_CLKOUT */
+ clocks = <&camera 0>;
+ clock-names = "cis_extclk";
+ port {
+ s5c73m3_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+};
+
+&i2c_3 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mms114-touchscreen@48 {
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupt-parent = <&gpm2>;
+ interrupts = <3 2>;
+ x-size = <720>;
+ y-size = <1280>;
+ avdd-supply = <&ldo23_reg>;
+ vdd-supply = <&ldo24_reg>;
+ };
+};
+
+&i2c_4 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c4_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ wm1811: wm1811@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "MCLK1";
+ DCVDD-supply = <&ldo3_reg>;
+ DBVDD1-supply = <&ldo3_reg>;
+ wlf,ldo1ena = <&gpj0 4 0>;
+ };
+};
+
+&i2c_7 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c7_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ max77686: max77686_pmic@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "VALIVE_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "VM1M2_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "VCC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-compatible = "LDO4";
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "VCC_1.8V_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "VMPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "VPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-compatible = "LDO8";
+ regulator-name = "VMIPI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-compatible = "LDO9";
+ regulator-name = "CAM_ISP_MIPI_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-compatible = "LDO10";
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: ldo11 {
+ regulator-compatible = "LDO11";
+ regulator-name = "VABB1_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo12_reg: ldo12 {
+ regulator-compatible = "LDO12";
+ regulator-name = "VUOTG_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo13_reg: ldo13 {
+ regulator-compatible = "LDO13";
+ regulator-name = "NFC_AVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo14_reg: ldo14 {
+ regulator-compatible = "LDO14";
+ regulator-name = "VABB2_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: ldo15 {
+ regulator-compatible = "LDO15";
+ regulator-name = "VHSIC_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo16_reg: ldo16 {
+ regulator-compatible = "LDO16";
+ regulator-name = "VHSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo17_reg: ldo17 {
+ regulator-compatible = "LDO17";
+ regulator-name = "CAM_SENSOR_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo18_reg: ldo18 {
+ regulator-compatible = "LDO18";
+ regulator-name = "CAM_ISP_SEN_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: ldo19 {
+ regulator-compatible = "LDO19";
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo20_reg: ldo20 {
+ regulator-compatible = "LDO20";
+ regulator-name = "VDDQ_PRE_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: ldo21 {
+ regulator-compatible = "LDO21";
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ ldo22_reg: ldo22 {
+ regulator-compatible = "LDO22";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ ldo23_reg: ldo23 {
+ regulator-compatible = "LDO23";
+ regulator-name = "TSP_AVDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo24_reg: ldo24 {
+ regulator-compatible = "LDO24";
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo25_reg: ldo25 {
+ regulator-compatible = "LDO25";
+ regulator-name = "LCD_VCC_3.3V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: ldo26 {
+ regulator-compatible = "LDO26";
+ regulator-name = "MOTOR_VCC_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ buck1_reg: buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ buck3_reg: buck3 {
+ regulator-compatible = "BUCK3";
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: buck4 {
+ regulator-compatible = "BUCK4";
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck5_reg: buck5 {
+ regulator-compatible = "BUCK5";
+ regulator-name = "VMEM_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: buck6 {
+ regulator-compatible = "BUCK6";
+ regulator-name = "VCC_SUB_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: buck7 {
+ regulator-compatible = "BUCK7";
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: buck8 {
+ regulator-compatible = "BUCK8";
+ regulator-name = "VMEM_VDDF_3.0V";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ buck9_reg: buck9 {
+ regulator-compatible = "BUCK9";
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ };
+};
+
+&i2s0 {
+ pinctrl-0 = <&i2s0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&mshc_0 {
+ num-slots = <1>;
+ broken-cd;
+ non-removable;
+ card-detect-delay = <200>;
+ vmmc-supply = <&ldo22_reg>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <0>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
&pmu_system_controller {
assigned-clocks = <&pmu_system_controller 0>;
assigned-clock-parents = <&clock CLK_XUSBXTI>;
PIN_SLP(gpv4-0, INPUT, DOWN);
};
};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>;
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+ bus-width = <4>;
+ cd-gpios = <&gpx3 4 0>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo21_reg>;
+ status = "okay";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&spi_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ cs-gpios = <&gpb 5 0>;
+ status = "okay";
+
+ s5c73m3_spi: s5c73m3 {
+ compatible = "samsung,s5c73m3";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ controller-data {
+ samsung,spi-feedback-delay = <2>;
+ };
+ };
+};
+
+&tmu {
+ vtmu-supply = <&ldo10_reg>;
+ status = "okay";
+};
};
};
- combiner: interrupt-controller@10440000 {
- samsung,combiner-nr = <20>;
- };
-
pmu {
interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
};
+};
- gic: interrupt-controller@10490000 {
- cpu-offset = <0x4000>;
- };
+&pmu_system_controller {
+ compatible = "samsung,exynos4412-pmu", "syscon";
+};
- pmu_system_controller: system-controller@10020000 {
- compatible = "samsung,exynos4412-pmu", "syscon";
- };
+&combiner {
+ samsung,combiner-nr = <20>;
+};
+
+&gic {
+ cpu-offset = <0x4000>;
};
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
- reg = <0x10020710 8>;
#phy-cells = <1>;
+ syscon = <&pmu_system_controller>;
};
pd_cam: cam-power-domain@10024000 {
};
rtc: rtc@10070000 {
- compatible = "samsung,exynos3250-rtc";
+ compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 73 0>, <0 74 0>;
status = "disabled";
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
+ iommus = <&sysmmu_fimd0>;
samsung,sysreg = <&sysreg_system_controller>;
status = "disabled";
};
status = "disabled";
};
+ sysmmu_fimd0: sysmmu@11E20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11e20000 0x1000>;
+ interrupts = <0 80 0>, <0 81 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
+ power-domains = <&pd_lcd0>;
+ #iommu-cells = <0>;
+ };
+
hsotg: hsotg@12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
}
/ {
- pinctrl@11400000 {
+ pinctrl_0: pinctrl@11400000 {
gpa0: gpa0 {
gpio-controller;
#gpio-cells = <2>;
};
};
- pinctrl@11000000 {
+ pinctrl_1: pinctrl@11000000 {
gpk0: gpk0 {
gpio-controller;
#gpio-cells = <2>;
};
};
- pinctrl@03860000 {
+ pinctrl_2: pinctrl@03860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
};
};
- pinctrl@106E0000 {
+ pinctrl_3: pinctrl@106E0000 {
gpv0: gpv0 {
gpio-controller;
#gpio-cells = <2>;
};
};
- combiner: interrupt-controller@10440000 {
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
- };
-
- pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
- };
-
- pinctrl_1: pinctrl@11000000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>;
-
- wakup_eint: wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
- interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
- };
- };
-
adc: adc@126C0000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x126C0000 0x100>;
status = "disabled";
};
- pinctrl_2: pinctrl@03860000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x03860000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <10 0>;
- };
-
- pinctrl_3: pinctrl@106E0000 {
- compatible = "samsung,exynos4x12-pinctrl";
- reg = <0x106E0000 0x1000>;
- interrupts = <0 72 0>;
- };
-
- pmu_system_controller: system-controller@10020000 {
- compatible = "samsung,exynos4212-pmu", "syscon";
- clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
- "clkout4", "clkout8", "clkout9";
- clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
- <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
- <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
- <&clock CLK_XUSBXTI>;
- #clock-cells = <1>;
- };
-
- g2d@10800000 {
+ g2d: g2d@10800000 {
compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>;
interrupts = <0 89 0>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
+ iommus = <&sysmmu_g2d>;
status = "disabled";
};
<&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
- fimc_0: fimc@11800000 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <4224 8192 1920 4224>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,cam-if;
- };
-
- fimc_1: fimc@11810000 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <4224 8192 1920 4224>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,cam-if;
- };
-
- fimc_2: fimc@11820000 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <4224 8192 1920 4224>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,lcd-wb;
- samsung,cam-if;
- };
-
- fimc_3: fimc@11830000 {
- compatible = "samsung,exynos4212-fimc";
- samsung,pix-limits = <1920 8192 1366 1920>;
- samsung,rotators = <0>;
- samsung,mainscaler-ext;
- samsung,isp-wb;
- samsung,lcd-wb;
- };
-
+ /* fimc_[0-3] are configured outside, under phandles */
fimc_lite_0: fimc-lite@12390000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x12390000 0x1000>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite";
+ iommus = <&sysmmu_fimc_lite0>;
status = "disabled";
};
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite";
+ iommus = <&sysmmu_fimc_lite1>;
status = "disabled";
};
"mcuispdiv1", "uart", "aclk200",
"div_aclk200", "aclk400mcuisp",
"div_aclk400mcuisp";
+ iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+ <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+ iommu-names = "isp", "drc", "fd", "mcuctl";
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
};
- exynos-usbphy@125B0000 {
- compatible = "samsung,exynos4x12-usb2-phy";
- samsung,sysreg-phandle = <&sys_reg>;
+ sysmmu_g2d: sysmmu@10A40000{
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10A40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 7>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
};
- tmu@100C0000 {
- compatible = "samsung,exynos4412-tmu";
+ sysmmu_fimc_isp: sysmmu@12260000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12260000 0x1000>;
interrupt-parent = <&combiner>;
- interrupts = <2 4>;
- reg = <0x100C0000 0x100>;
- clocks = <&clock 383>;
- clock-names = "tmu_apbif";
- status = "disabled";
+ interrupts = <16 2>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_ISP>;
+ #iommu-cells = <0>;
};
- hdmi: hdmi@12D00000 {
- compatible = "samsung,exynos4212-hdmi";
+ sysmmu_fimc_drc: sysmmu@12270000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12270000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 3>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_DRC>;
+ #iommu-cells = <0>;
};
- mixer: mixer@12C10000 {
- compatible = "samsung,exynos4212-mixer";
- clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
- clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
- <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+ sysmmu_fimc_fd: sysmmu@122A0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x122A0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 4>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FD>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_mcuctl: sysmmu@122B0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x122B0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 5>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_ISPCX>;
+ #iommu-cells = <0>;
};
+
+ sysmmu_fimc_lite0: sysmmu@123B0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x123B0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 0>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_lite1: sysmmu@123C0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x123C0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 1>;
+ power-domains = <&pd_isp>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
+ #iommu-cells = <0>;
+ };
+};
+
+&combiner {
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+ <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+};
+
+&exynos_usbphy {
+ compatible = "samsung,exynos4x12-usb2-phy";
+ samsung,sysreg-phandle = <&sys_reg>;
+};
+
+&fimc_0 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+};
+
+&fimc_1 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+};
+
+&fimc_2 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,lcd-wb;
+ samsung,cam-if;
+};
+
+&fimc_3 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <1920 8192 1366 1920>;
+ samsung,rotators = <0>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,lcd-wb;
+};
+
+&hdmi {
+ compatible = "samsung,exynos4212-hdmi";
+};
+
+&jpeg_codec {
+ compatible = "samsung,exynos4212-jpeg";
+};
+
+&mixer {
+ compatible = "samsung,exynos4212-mixer";
+ clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+ clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+ <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+};
+
+&pinctrl_0 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 47 0>;
+};
+
+&pinctrl_1 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 46 0>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>;
+ };
+};
+
+&pinctrl_2 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x03860000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 0>;
+};
+
+&pinctrl_3 {
+ compatible = "samsung,exynos4x12-pinctrl";
+ reg = <0x106E0000 0x1000>;
+ interrupts = <0 72 0>;
+};
+
+&pmu_system_controller {
+ compatible = "samsung,exynos4212-pmu", "syscon";
+ clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+ "clkout4", "clkout8", "clkout9";
+ clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+ <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+ <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+ #clock-cells = <1>;
+};
+
+&tmu {
+ compatible = "samsung,exynos4412-tmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 4>;
+ reg = <0x100C0000 0x100>;
+ clocks = <&clock 383>;
+ clock-names = "tmu_apbif";
+ status = "disabled";
};
interrupts = <0 54 0>;
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
interrupts = <0 43 0>, <0 44 0>;
status = "disabled";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
reg = <0x14400000 0x40000>;
status = "disabled";
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
compatible = "samsung,exynos5-dp";
reg = <0x145B0000 0x1000>;
interrupts = <10 3>;
reg = <0x09>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
voltage-regulators {
ldo1_reg: LDO1 {
};
};
};
+
+&pinctrl_0 {
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
};
};
- i2c@12CD0000 {
- ptn3460: lvds-bridge@20 {
- compatible = "nxp,ptn3460";
- reg = <0x20>;
- powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
- edid-emulation = <5>;
-
- ports {
- port@0 {
- bridge_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-
- port@1 {
- bridge_in: endpoint {
- remote-endpoint = <&dp_out>;
- };
- };
- };
- };
- };
-
sound {
compatible = "google,snow-audio-max98095";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+ ptn3460: lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+ edid-emulation = <5>;
+
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+
max98095: codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
interrupts = <0 91 0>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
+ iommus = <&sysmmu_g2d>;
};
mfc: codec@11000000 {
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
- };
-
- rtc: rtc@101E0000 {
- clocks = <&clock CLK_RTC>;
- clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
- status = "disabled";
+ iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+ iommu-names = "left", "right";
};
tmu: tmu@10060000 {
};
};
- serial@12C00000 {
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C10000 {
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C20000 {
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- serial@12C30000 {
- clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
+ iommu = <&sysmmu_gsc0>;
};
gsc_1: gsc@13e10000 {
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
+ iommu = <&sysmmu_gsc1>;
};
gsc_2: gsc@13e20000 {
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
+ iommu = <&sysmmu_gsc2>;
};
gsc_3: gsc@13e30000 {
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
+ iommu = <&sysmmu_gsc3>;
};
hdmi: hdmi {
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
+ iommus = <&sysmmu_tv>;
};
dp_phy: video-phy@10040720 {
#phy-cells = <0>;
};
- dp: dp-controller@145B0000 {
- power-domains = <&pd_disp1>;
- clocks = <&clock CLK_DP>;
- clock-names = "dp";
- phys = <&dp_phy>;
- phy-names = "dp";
- };
-
- fimd: fimd@14400000 {
- power-domains = <&pd_disp1>;
- clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
- clock-names = "sclk_fimd", "fimd";
- };
-
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
+
+ sysmmu_g2d: sysmmu@10A60000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10A60000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <24 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_r: sysmmu@11200000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11200000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <6 2>;
+ power-domains = <&pd_mfc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_l: sysmmu@11210000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11210000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <8 5>;
+ power-domains = <&pd_mfc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_rotator: sysmmu@11D40000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11D40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_jpeg: sysmmu@11F20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11F20000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 2>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_isp: sysmmu@13260000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13260000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_ISP>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_drc: sysmmu@13270000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13270000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <11 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_DRC>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_fd: sysmmu@132A0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132A0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 0>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_FD>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_scc: sysmmu@13280000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13280000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 2>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_SCC>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_scp: sysmmu@13290000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13290000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_SCP>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132B0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 4>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_MCU>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_odc: sysmmu@132C0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132C0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <11 0>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_ODC>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_dis0: sysmmu@132D0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132D0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 4>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_dis1: sysmmu@132E0000{
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132E0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <9 4>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_3dnr: sysmmu@132F0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132F0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_lite0: sysmmu@13C40000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13C40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 4>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimc_lite1: sysmmu@13C50000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13C50000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <24 1>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gsc0: sysmmu@13E80000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E80000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 0>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gsc1: sysmmu@13E90000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E90000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gsc2: sysmmu@13EA0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13EA0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 4>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gsc3: sysmmu@13EB0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13EB0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 6>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimd1: sysmmu@14640000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14640000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 2>;
+ power-domains = <&pd_disp1>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_tv: sysmmu@14650000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14650000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <7 4>;
+ power-domains = <&pd_disp1>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+ #iommu-cells = <0>;
+ };
+};
+
+&dp {
+ power-domains = <&pd_disp1>;
+ clocks = <&clock CLK_DP>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+};
+
+&fimd {
+ power-domains = <&pd_disp1>;
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+ clock-names = "sclk_fimd", "fimd";
+ iommus = <&sysmmu_fimd1>;
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
};
broken-cd;
bypass-smu;
cap-mmc-highspeed;
- supports-hs200-mode; /* 200 Mhz */
+ supports-hs200-mode; /* 200 MHz */
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
#include "exynos5420.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
};
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- mmc@12200000 {
- status = "okay";
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
- vmmc-supply = <&ldo10_reg>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc@12220000 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- vmmc-supply = <&ldo19_reg>;
- vqmmc-supply = <&ldo13_reg>;
- bus-width = <4>;
- cap-sd-highspeed;
- };
-
- hsi2c_4: i2c@12CA0000 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- s2mps11,buck2-ramp-delay = <12>;
- s2mps11,buck34-ramp-delay = <12>;
- s2mps11,buck16-ramp-delay = <12>;
- s2mps11,buck6-ramp-enable = <1>;
- s2mps11,buck2-ramp-enable = <1>;
- s2mps11,buck3-ramp-enable = <1>;
- s2mps11,buck4-ramp-enable = <1>;
-
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "PVDD_ALIVE_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "PVDD_APIO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "PVDD_APIO_MMCON_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "PVDD_ADC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "PVDD_PLL_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "PVDD_ANAIP_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "PVDD_ANAIP_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "PVDD_ABB_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "PVDD_USB_3V3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "PVDD_PRE_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "PVDD_USB_1V0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "PVDD_HSIC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "PVDD_APIO_MMCOFF_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "PVDD_PERI_2V8";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "PVDD_PERI_3V3";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "PVDD_EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "PVDD_TFLASH_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "PVDD_BTWIFI_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "PVDD_CAM1IO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "PVDD_MIFS_1V1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "PVDD_CAM1_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "PVDD_CAM0_AF_2V8";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo27_reg: LDO27 {
- regulator-name = "PVDD_G3DS_1V0";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo28_reg: LDO28 {
- regulator-name = "PVDD_TSP_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo29_reg: LDO29 {
- regulator-name = "PVDD_AUDIO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo31_reg: LDO31 {
- regulator-name = "PVDD_PERI_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo32_reg: LDO32 {
- regulator-name = "PVDD_LCD_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo33_reg: LDO33 {
- regulator-name = "PVDD_CAM0IO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo35_reg: LDO35 {
- regulator-name = "PVDD_CAM0_DVDD_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- ldo38_reg: LDO38 {
- regulator-name = "PVDD_CAM0_AVDD_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "PVDD_MIF_1V1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "PVDD_INT_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "PVDD_G3D_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "PVDD_LPDDR3_1V2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "PVDD_KFC_1V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "VIN_LLDO_1V4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "VIN_MLDO_2V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VIN_HLDO_3V5";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "PVDD_EMMCF_2V8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- };
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
&cci {
status = "disabled";
};
+
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "PVDD_ALIVE_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "PVDD_APIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "PVDD_APIO_MMCON_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "PVDD_ADC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "PVDD_PLL_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "PVDD_ANAIP_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "PVDD_ANAIP_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "PVDD_ABB_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "PVDD_USB_3V3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "PVDD_PRE_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "PVDD_USB_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "PVDD_HSIC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "PVDD_APIO_MMCOFF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "PVDD_PERI_2V8";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "PVDD_PERI_3V3";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "PVDD_EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "PVDD_TFLASH_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "PVDD_BTWIFI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "PVDD_CAM1IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "PVDD_MIFS_1V1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "PVDD_CAM1_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "PVDD_CAM0_AF_2V8";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "PVDD_G3DS_1V0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "PVDD_TSP_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "PVDD_AUDIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "PVDD_PERI_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo32_reg: LDO32 {
+ regulator-name = "PVDD_LCD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "PVDD_CAM0IO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "PVDD_CAM0_DVDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo38_reg: LDO38 {
+ regulator-name = "PVDD_CAM0_AVDD_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "PVDD_MIF_1V1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "PVDD_INT_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "PVDD_G3D_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "PVDD_LPDDR3_1V2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "PVDD_KFC_1V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "VIN_LLDO_1V4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "VIN_MLDO_2V0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VIN_HLDO_3V5";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "PVDD_EMMCF_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+ };
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ vmmc-supply = <&ldo10_reg>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ vmmc-supply = <&ldo19_reg>;
+ vqmmc-supply = <&ldo13_reg>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+ s2mps11_irq: s2mps11-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
};
};
-&uart_3 {
+&serial_3 {
status = "okay";
};
};
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- mmc@12200000 {
- status = "okay";
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- samsung,dw-mshc-hs400-timing = <0 2>;
- samsung,read-strobe-delay = <90>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
- &sd0_rclk>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc@12220000 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
- cap-sd-highspeed;
- };
-
- dp-controller@145B0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
- };
-
- fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
- };
- };
-
- pinctrl@13400000 {
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@14000000 {
- usb300_vbus_en: usb300-vbus-en {
- samsung,pins = "gpg0-5";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb301_vbus_en: usb301-vbus-en {
- samsung,pins = "gpg1-4";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
- };
-
- hdmi@14530000 {
- status = "okay";
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- };
-
usb300_vbus_reg: regulator-usb300 {
compatible = "regulator-fixed";
regulator-name = "VBUS0";
enable-active-high;
};
- phy@12100000 {
- vbus-supply = <&usb300_vbus_reg>;
- };
+};
- phy@12500000 {
- vbus-supply = <&usb301_vbus_reg>;
+&dp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ status = "okay";
+};
+
+&fimd {
+ status = "okay";
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing@0 {
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
};
+};
- i2c_2: i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+};
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
};
- };
- hsi2c_4: i2c@12CA0000 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- s2mps11,buck2-ramp-delay = <12>;
- s2mps11,buck34-ramp-delay = <12>;
- s2mps11,buck16-ramp-delay = <12>;
- s2mps11,buck6-ramp-enable = <1>;
- s2mps11,buck2-ramp-enable = <1>;
- s2mps11,buck3-ramp-enable = <1>;
- s2mps11,buck4-ramp-enable = <1>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_ldo1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "vdd_ldo3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "vdd_ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "vdd_ldo6";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "vdd_ldo7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "vdd_ldo8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "vdd_ldo9";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "vdd_ldo10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "vdd_ldo13";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "vdd_ldo15";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "tsp_avdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_mem";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd_kfc";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vdd_2.8v_ldo";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3750000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_vmem";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
- };
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
};
};
+
+&i2c_2 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ status = "okay";
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
+ &sd0_rclk>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_2 {
+ usb300_vbus_en: usb300-vbus-en {
+ samsung,pins = "gpg0-5";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb301_vbus_en: usb301-vbus-en {
+ samsung,pins = "gpg1-4";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&usbdrd_phy0 {
+ vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+ vbus-supply = <&usb301_vbus_reg>;
+};
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
power-domains = <&mfc_pd>;
+ iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+ iommu-names = "left", "right";
};
mmc_0: mmc@12200000 {
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
- <&clock CLK_MOUT_USER_ACLK333>;
- clock-names = "oscclk", "pclk0", "clk0";
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
+ clock-names = "oscclk", "clk0";
#power-domain-cells = <0>;
};
compatible = "samsung,exynos4210-pd";
reg = <0x100440C0 0x20>;
#power-domain-cells = <0>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>,
+ clocks = <&clock CLK_FIN_PLL>,
<&clock CLK_MOUT_USER_ACLK200_DISP1>,
- <&clock CLK_MOUT_SW_ACLK300>,
<&clock CLK_MOUT_USER_ACLK300_DISP1>,
- <&clock CLK_MOUT_SW_ACLK400>,
<&clock CLK_MOUT_USER_ACLK400_DISP1>,
<&clock CLK_FIMD1>, <&clock CLK_MIXER>;
- clock-names = "oscclk", "pclk0", "clk0",
- "pclk1", "clk1", "pclk2", "clk2",
- "asb0", "asb1";
+ clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
};
pinctrl_0: pinctrl@13400000 {
interrupts = <0 47 0>;
};
- rtc: rtc@101E0000 {
- clocks = <&clock CLK_RTC>;
- clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
- status = "disabled";
- };
-
amba {
#address-cells = <1>;
#size-cells = <1>;
<&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk0";
+ #sound-dai-cells = <1>;
samsung,idma-addr = <0x03000000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
dma-names = "tx", "rx";
clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
clock-names = "iis", "i2s_opclk0";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk1";
+ #sound-dai-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
status = "disabled";
dma-names = "tx", "rx";
clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
clock-names = "iis", "i2s_opclk0";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk2";
+ #sound-dai-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
status = "disabled";
status = "disabled";
};
- uart_0: serial@12C00000 {
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_1: serial@12C10000 {
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_2: serial@12C20000 {
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_3: serial@12C30000 {
- clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
pwm: pwm@12dd0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x12dd0000 0x100>;
#phy-cells = <0>;
};
- dp: dp-controller@145B0000 {
- clocks = <&clock CLK_DP1>;
- clock-names = "dp";
- phys = <&dp_phy>;
- phy-names = "dp";
- power-domains = <&disp_pd>;
- };
-
mipi_phy: video-phy@10040714 {
compatible = "samsung,s5pv210-mipi-video-phy";
- reg = <0x10040714 12>;
+ syscon = <&pmu_system_controller>;
#phy-cells = <1>;
};
status = "disabled";
};
- fimd: fimd@14400000 {
- clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
- clock-names = "sclk_fimd", "fimd";
- power-domains = <&disp_pd>;
- };
-
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>;
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
power-domains = <&disp_pd>;
+ iommus = <&sysmmu_tv>;
};
gsc_0: video-scaler@13e00000 {
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
+ iommus = <&sysmmu_gscl0>;
};
gsc_1: video-scaler@13e10000 {
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
+ iommus = <&sysmmu_gscl1>;
+ };
+
+ jpeg_0: jpeg@11F50000 {
+ compatible = "samsung,exynos5420-jpeg";
+ reg = <0x11F50000 0x1000>;
+ interrupts = <0 89 0>;
+ clock-names = "jpeg";
+ clocks = <&clock CLK_JPEG>;
+ iommus = <&sysmmu_jpeg0>;
+ };
+
+ jpeg_1: jpeg@11F60000 {
+ compatible = "samsung,exynos5420-jpeg";
+ reg = <0x11F60000 0x1000>;
+ interrupts = <0 168 0>;
+ clock-names = "jpeg";
+ clocks = <&clock CLK_JPEG2>;
+ iommus = <&sysmmu_jpeg1>;
};
pmu_system_controller: system-controller@10040000 {
samsung,sysreg-phandle = <&sysreg_system_controller>;
samsung,pmureg-phandle = <&pmu_system_controller>;
};
+
+ sysmmu_g2dr: sysmmu@0x10A60000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10A60000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <24 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_g2dw: sysmmu@0x10A70000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10A70000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <22 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_tv: sysmmu@0x14650000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14650000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <7 4>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+ power-domains = <&disp_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gscl0: sysmmu@0x13E80000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E80000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+ power-domains = <&gsc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gscl1: sysmmu@0x13E90000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E90000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+ power-domains = <&gsc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler0r: sysmmu@0x12880000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12880000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <22 4>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler1r: sysmmu@0x12890000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12890000 0x1000>;
+ interrupts = <0 186 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler2r: sysmmu@0x128A0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128A0000 0x1000>;
+ interrupts = <0 188 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler0w: sysmmu@0x128C0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128C0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <27 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler1w: sysmmu@0x128D0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128D0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <22 6>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler2w: sysmmu@0x128E0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128E0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <19 6>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_jpeg0: sysmmu@0x11F10000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11F10000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_jpeg1: sysmmu@0x11F20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11F20000 0x1000>;
+ interrupts = <0 169 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_l: sysmmu@0x11200000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11200000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <6 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+ power-domains = <&mfc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_r: sysmmu@0x11210000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11210000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <8 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+ power-domains = <&mfc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimd1_0: sysmmu@0x14640000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14640000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+ power-domains = <&disp_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimd1_1: sysmmu@0x14680000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14680000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+ power-domains = <&disp_pd>;
+ #iommu-cells = <0>;
+ };
+};
+
+&dp {
+ clocks = <&clock CLK_DP1>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ power-domains = <&disp_pd>;
+};
+
+&fimd {
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+ clock-names = "sclk_fimd", "fimd";
+ power-domains = <&disp_pd>;
+ iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
+ iommu-names = "m0", "m1";
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
};
--- /dev/null
+/*
+ * Hardkernel Odroid XU3 board device tree source
+ *
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5800.dtsi"
+
+/ {
+ memory {
+ reg = <0x40000000 0x7EA00000>;
+ };
+
+ chosen {
+ linux,stdout-path = &serial_2;
+ };
+
+ firmware@02073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ emmc_pwrseq: pwrseq {
+ pinctrl-0 = <&emmc_nrst_pin>;
+ pinctrl-names = "default";
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpd1 0 1>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
+
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "Odroid-XU3";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speakers", "Speakers";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ };
+ };
+};
+
+&clock_audss {
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>;
+ assigned-clock-rates = <0>,
+ <0>,
+ <19200000>;
+};
+
+&fimd {
+ status = "okay";
+};
+
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+ vdd-supply = <&ldo6_reg>;
+};
+
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ s2mps11,buck2-ramp-delay = <12>;
+ s2mps11,buck34-ramp-delay = <12>;
+ s2mps11,buck16-ramp-delay = <12>;
+ s2mps11,buck6-ramp-enable = <1>;
+ s2mps11,buck2-ramp-enable = <1>;
+ s2mps11,buck3-ramp-enable = <1>;
+ s2mps11,buck4-ramp-enable = <1>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "vdd_ldo26";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&hsi2c_5 {
+ status = "okay";
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2c_2 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ status = "okay";
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ mmc-pwrseq = <&emmc_pwrseq>;
+ cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ s2mps11_irq: s2mps11-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ emmc_nrst_pin: emmc-nrst {
+ samsung,pins = "gpd1-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
+};
--- /dev/null
+/*
+ * Hardkernel Odroid XU3-Lite board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+ model = "Hardkernel Odroid XU3 Lite";
+ compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+};
*/
/dts-v1/;
-#include "exynos5800.dtsi"
+#include "exynos5422-odroidxu3-common.dtsi"
/ {
model = "Hardkernel Odroid XU3";
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
- memory {
- reg = <0x40000000 0x7EA00000>;
- };
-
- chosen {
- linux,stdout-path = &serial_2;
- };
-
- fimd@14400000 {
- status = "okay";
- };
-
- firmware@02073000 {
- compatible = "samsung,secure-firmware";
- reg = <0x02073000 0x1000>;
- };
-
- fixed-rate-clocks {
- oscclk {
- compatible = "samsung,exynos5420-oscclk";
- clock-frequency = <24000000>;
- };
- };
-
- hsi2c_4: i2c@12CA0000 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- s2mps11,buck2-ramp-delay = <12>;
- s2mps11,buck34-ramp-delay = <12>;
- s2mps11,buck16-ramp-delay = <12>;
- s2mps11,buck6-ramp-enable = <1>;
- s2mps11,buck2-ramp-enable = <1>;
- s2mps11,buck3-ramp-enable = <1>;
- s2mps11,buck4-ramp-enable = <1>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_ldo1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "vdd_ldo3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "vdd_ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "vdd_ldo6";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "vdd_ldo7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "vdd_ldo8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "vdd_ldo9";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "vdd_ldo10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "vdd_ldo13";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "vdd_ldo15";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "tsp_avdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_mem";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd_kfc";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vdd_2.8v_ldo";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3750000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_vmem";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
- emmc_pwrseq: pwrseq {
- pinctrl-0 = <&emmc_nrst_pin>;
- pinctrl-names = "default";
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpd1 0 1>;
- };
-
- i2c_2: i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- rtc@101E0000 {
- status = "okay";
- };
-};
-
-&hdmi {
- status = "okay";
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
-
- vdd_osc-supply = <&ldo7_reg>;
- vdd_pll-supply = <&ldo6_reg>;
- vdd-supply = <&ldo6_reg>;
-};
-
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
-&mmc_0 {
- status = "okay";
- mmc-pwrseq = <&emmc_pwrseq>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
-};
-
-&mmc_2 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
- cap-sd-highspeed;
-};
-
-&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
-};
-
-&pinctrl_1 {
- emmc_nrst_pin: emmc-nrst {
- samsung,pins = "gpd1-0";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
- dr_mode = "otg";
};
&i2c_0 {
};
};
- gmac: ethernet@00230000 {
- fixed_phy;
- phy_addr = <1>;
- };
-
spi {
status = "disabled";
};
};
+
+&gmac {
+ fixed_phy;
+ phy_addr = <1>;
+};
bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
};
- spi_0: spi@D0000 {
-
- flash: w25q128@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128";
- spi-max-frequency = <15625000>;
- reg = <0>;
- controller-data {
- samsung,spi-feedback-delay = <0>;
- };
+ fixed-rate-clocks {
+ xtal {
+ compatible = "samsung,clock-xtal";
+ clock-frequency = <50000000>;
+ };
+ };
+};
- partition@00000 {
- label = "BootLoader";
- reg = <0x60000 0x80000>;
- read-only;
- };
+&pcie_0 {
+ reset-gpio = <&pin_ctrl 5 0>;
+ status = "okay";
+};
- partition@e0000 {
- label = "Recovery-Kernel";
- reg = <0xe0000 0x300000>;
- read-only;
- };
+&pcie_1 {
+ reset-gpio = <&pin_ctrl 22 0>;
+ status = "okay";
+};
- partition@3e0000 {
- label = "CRAM-FS";
- reg = <0x3e0000 0x700000>;
- read-only;
- };
+&spi_0 {
+ flash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128";
+ spi-max-frequency = <15625000>;
+ reg = <0>;
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
+ };
- partition@ae0000 {
- label = "User-Data";
- reg = <0xae0000 0x520000>;
- };
+ partition@00000 {
+ label = "BootLoader";
+ reg = <0x60000 0x80000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "Recovery-Kernel";
+ reg = <0xe0000 0x300000>;
+ read-only;
};
- };
+ partition@3e0000 {
+ label = "CRAM-FS";
+ reg = <0x3e0000 0x700000>;
+ read-only;
+ };
- fixed-rate-clocks {
- xtal {
- compatible = "samsung,clock-xtal";
- clock-frequency = <50000000>;
+ partition@ae0000 {
+ label = "User-Data";
+ reg = <0xae0000 0x520000>;
};
- };
- pcie@290000 {
- reset-gpio = <&pin_ctrl 5 0>;
- status = "okay";
};
- pcie@2a0000 {
- reset-gpio = <&pin_ctrl 22 0>;
- status = "okay";
- };
};
clock-names = "usbhost";
};
- pcie@290000 {
+ pcie_0: pcie@290000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
reg = <0x290000 0x1000
0x270000 0x1000
status = "disabled";
};
- pcie@2a0000 {
+ pcie_1: pcie@2a0000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
reg = <0x2a0000 0x1000
0x272000 0x1000
};
};
-&uart_3 {
+&serial_3 {
status = "okay";
};
status = "okay";
};
+ i2c: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_b>;
+ status = "okay";
+ };
+
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_ENABLE>;
};
+
+ i2c_pins_a: i2c@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_I2C_SCL__I2C_SCL
+ MX23_PAD_I2C_SDA__I2C_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c_pins_b: i2c@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX23_PAD_LCD_ENABLE__I2C_SCL
+ MX23_PAD_LCD_HSYNC__I2C_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c_pins_c: i2c@2 {
+ reg = <2>;
+ fsl,pinmux-ids = <
+ MX23_PAD_SSP1_DATA1__I2C_SCL
+ MX23_PAD_SSP1_DATA2__I2C_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
};
digctl@8001c000 {
status = "disabled";
};
- i2c@80058000 {
+ i2c: i2c@80058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx23-i2c";
reg = <0x80058000 0x2000>;
+ interrupts = <27>;
+ clock-frequency = <100000>;
dmas = <&dma_apbx 3>;
dma-names = "rx-tx";
status = "disabled";
solomon,height = <32>;
solomon,width = <128>;
solomon,page-offset = <0>;
+ solomon,com-lrremap;
+ solomon,com-invdir;
+ solomon,com-offset = <32>;
};
};
--- /dev/null
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+ model = "Armadeus APF6 Solo Module on APF6Dev Board";
+ compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+};
--- /dev/null
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+ model = "aristainetos2 i.MX6 Dual Lite Board 4";
+ compatible = "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ display0: display@di0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp>;
+
+ port@0 {
+ reg = <0>;
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&ecspi1 {
+ lcd_panel: display@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lg,lg4573";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ power-on-delay = <10>;
+
+ display-timings {
+ 480x800p57 {
+ native-mode;
+ clock-frequency = <27000027>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <10>;
+ hback-porch = <59>;
+ hsync-len = <10>;
+ vback-porch = <15>;
+ vfront-porch = <15>;
+ vsync-len = <15>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ touch: touch@4b {
+ compatible = "atmel,maxtouch";
+ reg = <0x4b>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 8>;
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+ pinctrl_ipu_disp: ipudisp1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1
+ >;
+ };
+};
--- /dev/null
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+ model = "aristainetos2 i.MX6 Dual Lite Board 7";
+ compatible = "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ panel: panel {
+ compatible = "lg,lb070wv8";
+ backlight = <&backlight>;
+ enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ touch: touch@4d {
+ compatible = "atmel,maxtouch";
+ reg = <0x4d>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 8>;
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_lvds0>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
--- /dev/null
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
+ compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
+};
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
};
};
+&gpt {
+ compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt";
+};
+
&hdmi {
compatible = "fsl,imx6dl-hdmi";
};
--- /dev/null
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+ model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
+ compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
--- /dev/null
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
+ compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
+};
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
--- /dev/null
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-duration = <10>;
+ phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* Wi-Fi */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ non-removable;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1271";
+ reg = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = <38400000>;
+ tcxo-clock-frequency = <38400000>;
+ };
+};
+
+/* eMMC */
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ apf6 {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_disp1>;
+
+ display-timings {
+ lw700 {
+ clock-frequency = <33000033>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <96>;
+ hfront-porch = <96>;
+ vback-porch = <20>;
+ vfront-porch = <21>;
+ hsync-len = <64>;
+ vsync-len = <4>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ port {
+ display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ user-button {
+ label = "User button";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ user-led {
+ label = "User LED";
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usbh1_vbus: usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6-armadeus-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6-armadeus-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-out;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+ <&gpio4 10 GPIO_ACTIVE_LOW>,
+ <&gpio4 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ touchscreen@48 {
+ compatible = "semtech,sx8654";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touchscreen>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+/* GPS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* GSM */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+/* console */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh1_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ vbus-supply = <®_usb_otg_vbus>;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpios>;
+
+ apf6dev {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
+ >;
+ };
+
+ pinctrl_gpios: gpiosgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1
+ MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1
+ >;
+ };
+
+ pinctrl_gsm: gsmgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu1_disp1: ipu1disp1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_touchscreen: touchscreengrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
+ >;
+ };
+ };
+};
--- /dev/null
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_2p5v: 2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usbh1_vbus: usb-h1-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbotg_vbus: usb-otg-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
+ &gpio4 10 GPIO_ACTIVE_HIGH
+ &gpio4 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+};
+
+&ecspi2 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
+&ecspi4 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ status = "okay";
+
+ flash: m25p80@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <04 0x8>;
+
+ regulators {
+ bcore1 {
+ regulator-name = "bcore1";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bcore2 {
+ regulator-name = "bcore2";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bpro {
+ regulator-name = "bpro";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bperi {
+ regulator-name = "bperi";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bmem {
+ regulator-name = "bmem";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2 {
+ regulator-name = "ldo2";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo3 {
+ regulator-name = "ldo3";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4 {
+ regulator-name = "ldo4";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5 {
+ regulator-name = "ldo5";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6 {
+ regulator-name = "ldo6";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-name = "ldo7";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8 {
+ regulator-name = "ldo8";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo9 {
+ regulator-name = "ldo9";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo10 {
+ regulator-name = "ldo10";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo11 {
+ regulator-name = "ldo11";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ bio {
+ regulator-name = "bio";
+ regulator-always-on = <1>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+
+ tmp103: tmp103@71 {
+ compatible = "ti,tmp103";
+ reg = <0x71>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ expander: tca6416@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ rtc@68 {
+ compatible = "dallas,m41t00";
+ reg = <0x68>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ eeprom@50{
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ eeprom@57{
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&pcie {
+ reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh1_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usbotg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio>;
+
+ pinctrl_audmux: audmux {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */
+ >;
+ };
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+ MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* led enable */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* led yellow */
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 /* led red */
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /* led green */
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 /* led blue */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* Profibus IRQ */
+ MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* FPGA IRQ */
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 /* spi bus #2 SS driver enable */
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* Touchscreen IRQ */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0 /* PCIe reset */
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpmi-nand {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
+ fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
+ };
+
+ pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
+ fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 /* SD1 card detect input */
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* SD1 write protect input */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 /* SD2 level shifter output enable */
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* SD2 card detect input */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SD2 write protect input */
+ >;
+ };
+};
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
--- /dev/null
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ /* these are used by bootloader for disabling nodes */
+ aliases {
+ led0 = &led0;
+ nand = &gpmi;
+ ssi0 = &ssi1;
+ usb0 = &usbh1;
+ usb1 = &usbotg;
+ };
+
+ chosen {
+ bootargs = "console=ttymxc1,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led0: user1 {
+ label = "user1";
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_5p0v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_h1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom1: eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom2: eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom3: eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom4: eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ gpio: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ gpio_exp: pca9555@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6qdl-gw51xx {
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+ };
+};
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
>;
};
+ pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+ >;
+ };
+
pinctrl_hummingboard_pwm1: pwm1grp {
fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
};
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
+ reset-gpio = <&gpio3 4 0>;
+ status = "okay";
+};
+
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* whole.
*
* a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License.
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/gpio/gpio.h>
+/ {
+ clk_sdio: sdio-clock {
+ compatible = "gpio-gate-clock";
+ #clock-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+ enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_brcm: brcm-reg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 19 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+ regulator-name = "brcm_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ };
+ };
+
+ usdhc1_pwrseq: usdhc1_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+ <&gpio6 0 GPIO_ACTIVE_LOW>;
+ clocks = <&clk_sdio>;
+ clock-names = "ext_clock";
+ };
+};
&iomuxc {
microsom {
+ pinctrl_microsom_brcm_bt: microsom-brcm-bt {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070
+ MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070
+ MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070
+ >;
+ };
+
+ pinctrl_microsom_brcm_osc: microsom-brcm-osc {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+ >;
+ };
+
+ pinctrl_microsom_brcm_reg: microsom-brcm-reg {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070
+ >;
+ };
+
+ pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070
+ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070
+ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070
+ >;
+ };
+
pinctrl_microsom_uart1: microsom-uart1 {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
+
+ pinctrl_microsom_uart4: microsom-uart4 {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_microsom_usdhc1: microsom-usdhc1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ >;
+ };
};
};
pinctrl-0 = <&pinctrl_microsom_uart1>;
status = "okay";
};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+ bus-width = <4>;
+ mmc-pwrseq = <&usdhc1_pwrseq>;
+ keep-power-in-suspend;
+ non-removable;
+ vmmc-supply = <®_brcm>;
+ status = "okay";
+};
status = "okay";
};
- backlight_lvds {
+ backlight_lvds: backlight_lvds {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
power-supply = <®_3p3v>;
status = "okay";
};
+
+ panel {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&audmux {
fsl,data-width = <18>;
status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
status = "okay";
};
- backlight_lvds {
+ backlight_lvds: backlight_lvds {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
power-supply = <®_3p3v>;
status = "okay";
};
+
+ panel {
+ compatible = "hannstar,hsd100pxn1";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};
&audmux {
fsl,data-width = <18>;
status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
status = "disabled";
};
+ hdmi: hdmi@0120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00120000 0x9000>;
+ interrupts = <0 115 0x04>;
+ gpr = <&gpr>;
+ clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+ <&clks IMX6QDL_CLK_HDMI_ISFR>;
+ clock-names = "iahb", "isfr";
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
+ };
+
timer@00a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
<&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
clock-names = "per", "ahb";
+ power-domains = <&gpc 1>;
resets = <&src 1>;
iram = <&ocram>;
};
};
};
- hdmi: hdmi@0120000 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x00120000 0x9000>;
- interrupts = <0 115 0x04>;
- gpr = <&gpr>;
- clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
- <&clks IMX6QDL_CLK_HDMI_ISFR>;
- clock-names = "iahb", "isfr";
- status = "disabled";
-
- port@0 {
- reg = <0>;
-
- hdmi_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_hdmi>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- hdmi_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_hdmi>;
- };
- };
- };
-
dcic1: dcic@020e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x80000000 0x20000000>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_otg1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 0 0>;
- enable-active-high;
- };
-
- reg_usb_otg2_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 2 0>;
- enable-active-high;
- };
-
- reg_1p8v: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "1P8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- };
-
usdhc3_pwrseq: usdhc3_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
};
&usbotg1 {
- vbus-supply = <®_usb_otg1_vbus>;
- dr_mode = "host";
+ dr_mode = "peripheral";
disable-over-current;
status = "okay";
};
&usbotg2 {
- vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
disable-over-current;
status = "okay";
};
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX7D_PINFUNC_H
+#define __DTS_IMX7D_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA00__KPP_ROW3 0x0034 0x02A4 0x0620 0x3 0x0
+#define MX7D_PAD_EPDC_DATA00__EIM_AD0 0x0034 0x02A4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x0034 0x02A4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_DATA0 0x0034 0x02A4 0x0638 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_CLK 0x0034 0x02A4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1 0x0038 0x02A8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK 0x0038 0x02A8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x0038 0x02A8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA01__KPP_COL3 0x0038 0x02A8 0x0600 0x3 0x0
+#define MX7D_PAD_EPDC_DATA01__EIM_AD1 0x0038 0x02A8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x0038 0x02A8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_DATA1 0x0038 0x02A8 0x063C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE 0x0038 0x02A8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2 0x003C 0x02AC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B 0x003C 0x02AC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x003C 0x02AC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA02__KPP_ROW2 0x003C 0x02AC 0x061C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA02__EIM_AD2 0x003C 0x02AC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x003C 0x02AC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_DATA2 0x003C 0x02AC 0x0640 0x6 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC 0x003C 0x02AC 0x0698 0x7 0x0
+#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3 0x0040 0x02B0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN 0x0040 0x02B0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x0040 0x02B0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA03__KPP_COL2 0x0040 0x02B0 0x05FC 0x3 0x0
+#define MX7D_PAD_EPDC_DATA03__EIM_AD3 0x0040 0x02B0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x0040 0x02B0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_DATA3 0x0040 0x02B0 0x0644 0x6 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC 0x0040 0x02B0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4 0x0044 0x02B4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD 0x0044 0x02B4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS 0x0044 0x02B4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA04__KPP_ROW1 0x0044 0x02B4 0x0618 0x3 0x0
+#define MX7D_PAD_EPDC_DATA04__EIM_AD4 0x0044 0x02B4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x0044 0x02B4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA04__LCD_DATA4 0x0044 0x02B4 0x0648 0x6 0x0
+#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL 0x0044 0x02B4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5 0x0048 0x02B8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD 0x0048 0x02B8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x0048 0x02B8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA05__KPP_COL1 0x0048 0x02B8 0x05F8 0x3 0x0
+#define MX7D_PAD_EPDC_DATA05__EIM_AD5 0x0048 0x02B8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x0048 0x02B8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA05__LCD_DATA5 0x0048 0x02B8 0x064C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE 0x0048 0x02B8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6 0x004C 0x02BC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK 0x004C 0x02BC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x004C 0x02BC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA06__KPP_ROW0 0x004C 0x02BC 0x0614 0x3 0x0
+#define MX7D_PAD_EPDC_DATA06__EIM_AD6 0x004C 0x02BC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x004C 0x02BC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA06__LCD_DATA6 0x004C 0x02BC 0x0650 0x6 0x0
+#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B 0x004C 0x02BC 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7 0x0050 0x02C0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B 0x0050 0x02C0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x0050 0x02C0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA07__KPP_COL0 0x0050 0x02C0 0x05F4 0x3 0x0
+#define MX7D_PAD_EPDC_DATA07__EIM_AD7 0x0050 0x02C0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x0050 0x02C0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA07__LCD_DATA7 0x0050 0x02C0 0x0654 0x6 0x0
+#define MX7D_PAD_EPDC_DATA07__JTAG_DONE 0x0050 0x02C0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8 0x0054 0x02C4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD 0x0054 0x02C4 0x06E4 0x1 0x0
+#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0 0x0054 0x02C4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x0054 0x02C4 0x071C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX 0x0054 0x02C4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__EIM_OE 0x0054 0x02C4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x0054 0x02C4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_DATA8 0x0054 0x02C4 0x0658 0x6 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_BUSY 0x0054 0x02C4 0x0634 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK 0x0054 0x02C4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9 0x0058 0x02C8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK 0x0058 0x02C8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1 0x0058 0x02C8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x0058 0x02C8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX 0x0058 0x02C8 0x071C 0x3 0x1
+#define MX7D_PAD_EPDC_DATA09__EIM_RW 0x0058 0x02C8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x0058 0x02C8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA9 0x0058 0x02C8 0x065C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA0 0x0058 0x02C8 0x0638 0x7 0x1
+#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE 0x0058 0x02C8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10 0x005C 0x02CC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B 0x005C 0x02CC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2 0x005C 0x02CC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x005C 0x02CC 0x0718 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS 0x005C 0x02CC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B 0x005C 0x02CC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x005C 0x02CC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA10 0x005C 0x02CC 0x0660 0x6 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA9 0x005C 0x02CC 0x065C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE 0x005C 0x02CC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11 0x0060 0x02D0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN 0x0060 0x02D0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3 0x0060 0x02D0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x0060 0x02D0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS 0x0060 0x02D0 0x0718 0x3 0x1
+#define MX7D_PAD_EPDC_DATA11__EIM_BCLK 0x0060 0x02D0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x0060 0x02D0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA11 0x0060 0x02D0 0x0664 0x6 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA1 0x0060 0x02D0 0x063C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0 0x0060 0x02D0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12 0x0064 0x02D4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD 0x0064 0x02D4 0x06E0 0x1 0x0
+#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS 0x0064 0x02D4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x0064 0x02D4 0x0724 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX 0x0064 0x02D4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B 0x0064 0x02D4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x0064 0x02D4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA12 0x0064 0x02D4 0x0668 0x6 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA21 0x0064 0x02D4 0x068C 0x7 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK 0x0064 0x02D4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13 0x0068 0x02D8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD 0x0068 0x02D8 0x06EC 0x1 0x0
+#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK 0x0068 0x02D8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x0068 0x02D8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX 0x0068 0x02D8 0x0724 0x3 0x1
+#define MX7D_PAD_EPDC_DATA13__EIM_WAIT 0x0068 0x02D8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x0068 0x02D8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_DATA13 0x0068 0x02D8 0x066C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_CS 0x0068 0x02D8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE 0x0068 0x02D8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14 0x006C 0x02DC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK 0x006C 0x02DC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B 0x006C 0x02DC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x006C 0x02DC 0x0720 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS 0x006C 0x02DC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0 0x006C 0x02DC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x006C 0x02DC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA14 0x006C 0x02DC 0x0670 0x6 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA22 0x006C 0x02DC 0x0690 0x7 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP 0x006C 0x02DC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15 0x0070 0x02E0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B 0x0070 0x02E0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B 0x0070 0x02E0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x0070 0x02E0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS 0x0070 0x02E0 0x0720 0x3 0x1
+#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B 0x0070 0x02E0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x0070 0x02E0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_DATA15 0x0070 0x02E0 0x0674 0x6 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN 0x0070 0x02E0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM 0x0070 0x02E0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK 0x0074 0x02E4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN 0x0074 0x02E4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x0074 0x02E4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4 0x0074 0x02E4 0x0624 0x3 0x0
+#define MX7D_PAD_EPDC_SDCLK__EIM_AD10 0x0074 0x02E4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x0074 0x02E4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_CLK 0x0074 0x02E4 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20 0x0074 0x02E4 0x0688 0x7 0x0
+#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE 0x0078 0x02E8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD 0x0078 0x02E8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x0078 0x02E8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDLE__KPP_COL4 0x0078 0x02E8 0x0604 0x3 0x0
+#define MX7D_PAD_EPDC_SDLE__EIM_AD11 0x0078 0x02E8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x0078 0x02E8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA16 0x0078 0x02E8 0x0678 0x6 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA8 0x0078 0x02E8 0x0658 0x7 0x1
+#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE 0x007C 0x02EC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0 0x007C 0x02EC 0x0584 0x1 0x0
+#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x007C 0x02EC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDOE__KPP_COL5 0x007C 0x02EC 0x0608 0x3 0x1
+#define MX7D_PAD_EPDC_SDOE__EIM_AD12 0x007C 0x02EC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x007C 0x02EC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA17 0x007C 0x02EC 0x067C 0x6 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA23 0x007C 0x02EC 0x0694 0x7 0x0
+#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR 0x0080 0x02F0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1 0x0080 0x02F0 0x0588 0x1 0x0
+#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x0080 0x02F0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5 0x0080 0x02F0 0x0628 0x3 0x1
+#define MX7D_PAD_EPDC_SDSHR__EIM_AD13 0x0080 0x02F0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x0080 0x02F0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18 0x0080 0x02F0 0x0680 0x6 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10 0x0080 0x02F0 0x0660 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0 0x0084 0x02F4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2 0x0084 0x02F4 0x058C 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x0084 0x02F4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE0__EIM_AD14 0x0084 0x02F4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x0084 0x02F4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19 0x0084 0x02F4 0x0684 0x6 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5 0x0084 0x02F4 0x064C 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1 0x0088 0x02F8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3 0x0088 0x02F8 0x0590 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x0088 0x02F8 0x0578 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER 0x0088 0x02F8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_SDCE1__EIM_AD15 0x0088 0x02F8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x0088 0x02F8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20 0x0088 0x02F8 0x0688 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4 0x0088 0x02F8 0x0648 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2 0x008C 0x02FC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN 0x008C 0x02FC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x008C 0x02FC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE2__KPP_COL6 0x008C 0x02FC 0x060C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16 0x008C 0x02FC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x008C 0x02FC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21 0x008C 0x02FC 0x068C 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3 0x008C 0x02FC 0x0644 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3 0x0090 0x0300 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD 0x0090 0x0300 0x06E8 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x0090 0x0300 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6 0x0090 0x0300 0x062C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17 0x0090 0x0300 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x0090 0x0300 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22 0x0090 0x0300 0x0690 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2 0x0090 0x0300 0x0640 0x7 0x1
+#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0094 0x0304 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0 0x0094 0x0304 0x05AC 0x1 0x0
+#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x0094 0x0304 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDCLK__KPP_COL7 0x0094 0x0304 0x0610 0x3 0x0
+#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18 0x0094 0x0304 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x0094 0x0304 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23 0x0094 0x0304 0x0694 0x6 0x1
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16 0x0094 0x0304 0x0678 0x7 0x1
+#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE 0x0098 0x0308 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1 0x0098 0x0308 0x05B0 0x1 0x0
+#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x0098 0x0308 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDOE__KPP_ROW7 0x0098 0x0308 0x0630 0x3 0x0
+#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19 0x0098 0x0308 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x0098 0x0308 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN 0x0098 0x0308 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_DATA18 0x0098 0x0308 0x0680 0x7 0x1
+#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL 0x009C 0x030C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2 0x009C 0x030C 0x05B4 0x1 0x0
+#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x009C 0x030C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20 0x009C 0x030C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x009C 0x030C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_RD_E 0x009C 0x030C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_DATA19 0x009C 0x030C 0x0684 0x7 0x1
+#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP 0x00A0 0x0310 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3 0x00A0 0x0310 0x05B8 0x1 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x00A0 0x0310 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER 0x00A0 0x0310 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21 0x00A0 0x0310 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x00A0 0x0310 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDSP__LCD_BUSY 0x00A0 0x0310 0x0634 0x6 0x1
+#define MX7D_PAD_EPDC_GDSP__LCD_DATA17 0x00A0 0x0310 0x067C 0x7 0x1
+#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0 0x00A4 0x0314 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK 0x00A4 0x0314 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2 0x00A4 0x0314 0x0570 0x3 0x1
+#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22 0x00A4 0x0314 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x00A4 0x0314 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_CS 0x00A4 0x0314 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_DATA7 0x00A4 0x0314 0x0654 0x7 0x1
+#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1 0x00A8 0x0318 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN 0x00A8 0x0318 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK 0x00A8 0x0318 0x0578 0x2 0x1
+#define MX7D_PAD_EPDC_BDR1__EIM_AD8 0x00A8 0x0318 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x00A8 0x0318 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE 0x00A8 0x0318 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_DATA6 0x00A8 0x0318 0x0650 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00AC 0x031C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA 0x00AC 0x031C 0x05CC 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS 0x00AC 0x031C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9 0x00AC 0x031C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x00AC 0x031C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC 0x00AC 0x031C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11 0x00AC 0x031C 0x0664 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00B0 0x0320 0x0580 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB 0x00B0 0x0320 0x05D0 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL 0x00B0 0x0320 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1 0x00B0 0x0320 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x00B0 0x0320 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC 0x00B0 0x0320 0x0698 0x6 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12 0x00B0 0x0320 0x0668 0x7 0x1
+#define MX7D_PAD_LCD_CLK__LCD_CLK 0x00B4 0x0324 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x00B4 0x0324 0x0558 0x1 0x0
+#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN 0x00B4 0x0324 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_CLK__CSI_DATA16 0x00B4 0x0324 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DCE_RX 0x00B4 0x0324 0x06FC 0x4 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DTE_TX 0x00B4 0x0324 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_CLK__GPIO3_IO0 0x00B4 0x0324 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x00B8 0x0328 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x00B8 0x0328 0x055C 0x1 0x0
+#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN 0x00B8 0x0328 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_ENABLE__CSI_DATA17 0x00B8 0x0328 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x00B8 0x0328 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX 0x00B8 0x0328 0x06FC 0x4 0x1
+#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1 0x00B8 0x0328 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x00BC 0x032C 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x00BC 0x032C 0x0554 0x1 0x0
+#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN 0x00BC 0x032C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_HSYNC__CSI_DATA18 0x00BC 0x032C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS 0x00BC 0x032C 0x06F8 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS 0x00BC 0x032C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00BC 0x032C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x00C0 0x0330 0x0698 0x0 0x2
+#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0 0x00C0 0x0330 0x0560 0x1 0x0
+#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN 0x00C0 0x0330 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_VSYNC__CSI_DATA19 0x00C0 0x0330 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS 0x00C0 0x0330 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS 0x00C0 0x0330 0x06F8 0x4 0x1
+#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00C0 0x0330 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_RESET__LCD_RESET 0x00C4 0x0334 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1 0x00C4 0x0334 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI 0x00C4 0x0334 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_RESET__CSI_FIELD 0x00C4 0x0334 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_RESET__EIM_DTACK_B 0x00C4 0x0334 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_RESET__GPIO3_IO4 0x00C4 0x0334 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__LCD_DATA0 0x00C8 0x0338 0x0638 0x0 0x2
+#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2 0x00C8 0x0338 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA00__CSI_DATA20 0x00C8 0x0338 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA00__EIM_DATA0 0x00C8 0x0338 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x00C8 0x0338 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0 0x00C8 0x0338 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA01__LCD_DATA1 0x00CC 0x033C 0x063C 0x0 0x2
+#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3 0x00CC 0x033C 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA01__CSI_DATA21 0x00CC 0x033C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA01__EIM_DATA1 0x00CC 0x033C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x00CC 0x033C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1 0x00CC 0x033C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA02__LCD_DATA2 0x00D0 0x0340 0x0640 0x0 0x2
+#define MX7D_PAD_LCD_DATA02__GPT1_CLK 0x00D0 0x0340 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA02__CSI_DATA22 0x00D0 0x0340 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA02__EIM_DATA2 0x00D0 0x0340 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA02__GPIO3_IO7 0x00D0 0x0340 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2 0x00D0 0x0340 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA03__LCD_DATA3 0x00D4 0x0344 0x0644 0x0 0x2
+#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1 0x00D4 0x0344 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA03__CSI_DATA23 0x00D4 0x0344 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA03__EIM_DATA3 0x00D4 0x0344 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA03__GPIO3_IO8 0x00D4 0x0344 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3 0x00D4 0x0344 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA04__LCD_DATA4 0x00D8 0x0348 0x0648 0x0 0x2
+#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2 0x00D8 0x0348 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA04__CSI_VSYNC 0x00D8 0x0348 0x0520 0x3 0x0
+#define MX7D_PAD_LCD_DATA04__EIM_DATA4 0x00D8 0x0348 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA04__GPIO3_IO9 0x00D8 0x0348 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4 0x00D8 0x0348 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA05__LCD_DATA5 0x00DC 0x034C 0x064C 0x0 0x2
+#define MX7D_PAD_LCD_DATA05__CSI_HSYNC 0x00DC 0x034C 0x0518 0x3 0x0
+#define MX7D_PAD_LCD_DATA05__EIM_DATA5 0x00DC 0x034C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x00DC 0x034C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5 0x00DC 0x034C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA06__LCD_DATA6 0x00E0 0x0350 0x0650 0x0 0x2
+#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK 0x00E0 0x0350 0x051C 0x3 0x0
+#define MX7D_PAD_LCD_DATA06__EIM_DATA6 0x00E0 0x0350 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA06__GPIO3_IO11 0x00E0 0x0350 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6 0x00E0 0x0350 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA07__LCD_DATA7 0x00E4 0x0354 0x0654 0x0 0x2
+#define MX7D_PAD_LCD_DATA07__CSI_MCLK 0x00E4 0x0354 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA07__EIM_DATA7 0x00E4 0x0354 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x00E4 0x0354 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7 0x00E4 0x0354 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA08__LCD_DATA8 0x00E8 0x0358 0x0658 0x0 0x2
+#define MX7D_PAD_LCD_DATA08__CSI_DATA9 0x00E8 0x0358 0x0514 0x3 0x0
+#define MX7D_PAD_LCD_DATA08__EIM_DATA8 0x00E8 0x0358 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA08__GPIO3_IO13 0x00E8 0x0358 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8 0x00E8 0x0358 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA09__LCD_DATA9 0x00EC 0x035C 0x065C 0x0 0x2
+#define MX7D_PAD_LCD_DATA09__CSI_DATA8 0x00EC 0x035C 0x0510 0x3 0x0
+#define MX7D_PAD_LCD_DATA09__EIM_DATA9 0x00EC 0x035C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x00EC 0x035C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9 0x00EC 0x035C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA10__LCD_DATA10 0x00F0 0x0360 0x0660 0x0 0x2
+#define MX7D_PAD_LCD_DATA10__CSI_DATA7 0x00F0 0x0360 0x050C 0x3 0x0
+#define MX7D_PAD_LCD_DATA10__EIM_DATA10 0x00F0 0x0360 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA10__GPIO3_IO15 0x00F0 0x0360 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x00F0 0x0360 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA11__LCD_DATA11 0x00F4 0x0364 0x0664 0x0 0x2
+#define MX7D_PAD_LCD_DATA11__CSI_DATA6 0x00F4 0x0364 0x0508 0x3 0x0
+#define MX7D_PAD_LCD_DATA11__EIM_DATA11 0x00F4 0x0364 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA11__GPIO3_IO16 0x00F4 0x0364 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x00F4 0x0364 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA12__LCD_DATA12 0x00F8 0x0368 0x0668 0x0 0x2
+#define MX7D_PAD_LCD_DATA12__CSI_DATA5 0x00F8 0x0368 0x0504 0x3 0x0
+#define MX7D_PAD_LCD_DATA12__EIM_DATA12 0x00F8 0x0368 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA12__GPIO3_IO17 0x00F8 0x0368 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x00F8 0x0368 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA13__LCD_DATA13 0x00FC 0x036C 0x066C 0x0 0x1
+#define MX7D_PAD_LCD_DATA13__CSI_DATA4 0x00FC 0x036C 0x0500 0x3 0x0
+#define MX7D_PAD_LCD_DATA13__EIM_DATA13 0x00FC 0x036C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA13__GPIO3_IO18 0x00FC 0x036C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x00FC 0x036C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA14__LCD_DATA14 0x0100 0x0370 0x0670 0x0 0x1
+#define MX7D_PAD_LCD_DATA14__CSI_DATA3 0x0100 0x0370 0x04FC 0x3 0x0
+#define MX7D_PAD_LCD_DATA14__EIM_DATA14 0x0100 0x0370 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA14__GPIO3_IO19 0x0100 0x0370 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0100 0x0370 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA15__LCD_DATA15 0x0104 0x0374 0x0674 0x0 0x1
+#define MX7D_PAD_LCD_DATA15__CSI_DATA2 0x0104 0x0374 0x04F8 0x3 0x0
+#define MX7D_PAD_LCD_DATA15__EIM_DATA15 0x0104 0x0374 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0104 0x0374 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0104 0x0374 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA16__LCD_DATA16 0x0108 0x0378 0x0678 0x0 0x2
+#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4 0x0108 0x0378 0x0594 0x1 0x0
+#define MX7D_PAD_LCD_DATA16__CSI_DATA1 0x0108 0x0378 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA16__EIM_CRE 0x0108 0x0378 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA16__GPIO3_IO21 0x0108 0x0378 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16 0x0108 0x0378 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA17__LCD_DATA17 0x010C 0x037C 0x067C 0x0 0x2
+#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5 0x010C 0x037C 0x0598 0x1 0x0
+#define MX7D_PAD_LCD_DATA17__CSI_DATA0 0x010C 0x037C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN 0x010C 0x037C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x010C 0x037C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17 0x010C 0x037C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA18__LCD_DATA18 0x0110 0x0380 0x0680 0x0 0x2
+#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6 0x0110 0x0380 0x059C 0x1 0x0
+#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO 0x0110 0x0380 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA18__CSI_DATA15 0x0110 0x0380 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA18__EIM_CS2_B 0x0110 0x0380 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x0110 0x0380 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18 0x0110 0x0380 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__EIM_CS3_B 0x0114 0x0384 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0114 0x0384 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19 0x0114 0x0384 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__LCD_DATA19 0x0114 0x0384 0x0684 0x0 0x2
+#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7 0x0114 0x0384 0x05A0 0x1 0x0
+#define MX7D_PAD_LCD_DATA19__CSI_DATA14 0x0114 0x0384 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA20__EIM_ADDR23 0x0118 0x0388 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x0118 0x0388 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA20__I2C3_SCL 0x0118 0x0388 0x05E4 0x6 0x1
+#define MX7D_PAD_LCD_DATA20__LCD_DATA20 0x0118 0x0388 0x0688 0x0 0x2
+#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4 0x0118 0x0388 0x05BC 0x1 0x0
+#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT 0x0118 0x0388 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA20__CSI_DATA13 0x0118 0x0388 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__LCD_DATA21 0x011C 0x038C 0x068C 0x0 0x2
+#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5 0x011C 0x038C 0x05C0 0x1 0x0
+#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT 0x011C 0x038C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA21__CSI_DATA12 0x011C 0x038C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__EIM_ADDR24 0x011C 0x038C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x011C 0x038C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA21__I2C3_SDA 0x011C 0x038C 0x05E8 0x6 0x1
+#define MX7D_PAD_LCD_DATA22__LCD_DATA22 0x0120 0x0390 0x0690 0x0 0x2
+#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6 0x0120 0x0390 0x05C4 0x1 0x0
+#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT 0x0120 0x0390 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA22__CSI_DATA11 0x0120 0x0390 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA22__EIM_ADDR25 0x0120 0x0390 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0120 0x0390 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA22__I2C4_SCL 0x0120 0x0390 0x05EC 0x6 0x1
+#define MX7D_PAD_LCD_DATA23__LCD_DATA23 0x0124 0x0394 0x0694 0x0 0x2
+#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7 0x0124 0x0394 0x05C8 0x1 0x0
+#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT 0x0124 0x0394 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA23__CSI_DATA10 0x0124 0x0394 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0
+#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1 0x0128 0x0398 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN 0x0128 0x0398 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x0128 0x0398 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO 0x0128 0x0398 0x0000 0x6 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x012C 0x039C 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x012C 0x039C 0x06F4 0x0 0x1
+#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x012C 0x039C 0x05D8 0x1 0x0
+#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK 0x012C 0x039C 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2 0x012C 0x039C 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0
+#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0
+#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0
+#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0 0x0134 0x03A4 0x06C8 0x2 0x0
+#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY 0x0134 0x03A4 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT 0x0134 0x03A4 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x0134 0x03A4 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC 0x0134 0x03A4 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0138 0x03A8 0x0704 0x0 0x2
+#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x0138 0x03A8 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC 0x0138 0x03A8 0x072C 0x1 0x0
+#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC 0x0138 0x03A8 0x06CC 0x2 0x0
+#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO 0x0138 0x03A8 0x0528 0x3 0x0
+#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN 0x0138 0x03A8 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4 0x0138 0x03A8 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL 0x0138 0x03A8 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x013C 0x03AC 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x013C 0x03AC 0x0704 0x0 0x3
+#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR 0x013C 0x03AC 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x013C 0x03AC 0x06D0 0x2 0x0
+#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI 0x013C 0x03AC 0x052C 0x3 0x0
+#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0
+#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0
+#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK 0x0140 0x03B0 0x0000 0x3 0x0
+#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN 0x0140 0x03B0 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x0140 0x03B0 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RTS_B__SD3_LCTL 0x0140 0x03B0 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x0144 0x03B4 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS 0x0144 0x03B4 0x0700 0x0 0x3
+#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR 0x0144 0x03B4 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x0144 0x03B4 0x06D4 0x2 0x0
+#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0 0x0144 0x03B4 0x0530 0x3 0x0
+#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT 0x0144 0x03B4 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x0144 0x03B4 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT 0x0144 0x03B4 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SCL__I2C1_SCL 0x0148 0x03B8 0x05D4 0x0 0x1
+#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS 0x0148 0x03B8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS 0x0148 0x03B8 0x0708 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX 0x0148 0x03B8 0x04DC 0x2 0x1
+#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x0148 0x03B8 0x0548 0x3 0x0
+#define MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x0148 0x03B8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SCL__SD2_VSELECT 0x0148 0x03B8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SDA__I2C1_SDA 0x014C 0x03BC 0x05D8 0x0 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS 0x014C 0x03BC 0x0708 0x1 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS 0x014C 0x03BC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX 0x014C 0x03BC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x014C 0x03BC 0x054C 0x3 0x0
+#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1 0x014C 0x03BC 0x0564 0x4 0x1
+#define MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x014C 0x03BC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SDA__SD3_VSELECT 0x014C 0x03BC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C2_SCL__I2C2_SCL 0x0150 0x03C0 0x05DC 0x0 0x1
+#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX 0x0150 0x03C0 0x070C 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX 0x0150 0x03C0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B 0x0150 0x03C0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x0150 0x03C0 0x0544 0x3 0x0
+#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2 0x0150 0x03C0 0x0570 0x4 0x2
+#define MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x0150 0x03C0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SCL__SD3_CD_B 0x0150 0x03C0 0x0738 0x6 0x1
+#define MX7D_PAD_I2C2_SDA__I2C2_SDA 0x0154 0x03C4 0x05E0 0x0 0x1
+#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX 0x0154 0x03C4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX 0x0154 0x03C4 0x070C 0x1 0x1
+#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB 0x0154 0x03C4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0 0x0154 0x03C4 0x0550 0x3 0x0
+#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3 0x0154 0x03C4 0x0000 0x4 0x0
+#define MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x0154 0x03C4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SDA__SD3_WP 0x0154 0x03C4 0x073C 0x6 0x1
+#define MX7D_PAD_I2C3_SCL__I2C3_SCL 0x0158 0x03C8 0x05E4 0x0 0x2
+#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS 0x0158 0x03C8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS 0x0158 0x03C8 0x0710 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX 0x0158 0x03C8 0x04E0 0x2 0x1
+#define MX7D_PAD_I2C3_SCL__CSI_VSYNC 0x0158 0x03C8 0x0520 0x3 0x1
+#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0 0x0158 0x03C8 0x06D8 0x4 0x1
+#define MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x0158 0x03C8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SCL__EPDC_BDR0 0x0158 0x03C8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C3_SDA__I2C3_SDA 0x015C 0x03CC 0x05E8 0x0 0x2
+#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS 0x015C 0x03CC 0x0710 0x1 0x1
+#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS 0x015C 0x03CC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX 0x015C 0x03CC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C3_SDA__CSI_HSYNC 0x015C 0x03CC 0x0518 0x3 0x1
+#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1 0x015C 0x03CC 0x06DC 0x4 0x1
+#define MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x015C 0x03CC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SDA__EPDC_BDR1 0x015C 0x03CC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SCL__I2C4_SCL 0x0160 0x03D0 0x05EC 0x0 0x2
+#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x0160 0x03D0 0x0714 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX 0x0160 0x03D0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B 0x0160 0x03D0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK 0x0160 0x03D0 0x051C 0x3 0x1
+#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID 0x0160 0x03D0 0x0734 0x4 0x1
+#define MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x0160 0x03D0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0 0x0160 0x03D0 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SDA__I2C4_SDA 0x0164 0x03D4 0x05F0 0x0 0x2
+#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x0164 0x03D4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX 0x0164 0x03D4 0x0714 0x1 0x1
+#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB 0x0164 0x03D4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SDA__CSI_MCLK 0x0164 0x03D4 0x0000 0x3 0x0
+#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID 0x0164 0x03D4 0x0730 0x4 0x1
+#define MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x0164 0x03D4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1 0x0164 0x03D4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x0168 0x03D8 0x0524 0x0 0x1
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x0168 0x03D8 0x071C 0x1 0x2
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x0168 0x03D8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4 0x0168 0x03D8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2 0x0168 0x03D8 0x04F8 0x3 0x1
+#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x0168 0x03D8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM 0x0168 0x03D8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x016C 0x03DC 0x052C 0x0 0x1
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x016C 0x03DC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x016C 0x03DC 0x071C 0x1 0x3
+#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5 0x016C 0x03DC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3 0x016C 0x03DC 0x04FC 0x3 0x1
+#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x016C 0x03DC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT 0x016C 0x03DC 0x0580 0x6 0x1
+#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x0170 0x03E0 0x0528 0x0 0x1
+#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x0170 0x03E0 0x0718 0x1 0x2
+#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS 0x0170 0x03E0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6 0x0170 0x03E0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4 0x0170 0x03E0 0x0500 0x3 0x1
+#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x0170 0x03E0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ 0x0170 0x03E0 0x057C 0x6 0x0
+#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0 0x0174 0x03E4 0x0530 0x0 0x1
+#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x0174 0x03E4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS 0x0174 0x03E4 0x0718 0x1 0x3
+#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7 0x0174 0x03E4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5 0x0174 0x03E4 0x0504 0x3 0x1
+#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x0174 0x03E4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3 0x0174 0x03E4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x0178 0x03E8 0x0534 0x0 0x0
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x0178 0x03E8 0x0724 0x1 0x2
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x0178 0x03E8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4 0x0178 0x03E8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6 0x0178 0x03E8 0x0508 0x3 0x1
+#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13 0x0178 0x03E8 0x066C 0x4 0x2
+#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x0178 0x03E8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0 0x0178 0x03E8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x017C 0x03EC 0x053C 0x0 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x017C 0x03EC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x017C 0x03EC 0x0724 0x1 0x3
+#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5 0x017C 0x03EC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7 0x017C 0x03EC 0x050C 0x3 0x1
+#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14 0x017C 0x03EC 0x0670 0x4 0x2
+#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x017C 0x03EC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1 0x017C 0x03EC 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x0180 0x03F0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2 0x0180 0x03F0 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x0180 0x03F0 0x0538 0x0 0x0
+#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x0180 0x03F0 0x0720 0x1 0x2
+#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x0180 0x03F0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6 0x0180 0x03F0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8 0x0180 0x03F0 0x0510 0x3 0x1
+#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15 0x0180 0x03F0 0x0674 0x4 0x2
+#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x0184 0x03F4 0x0540 0x0 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x0184 0x03F4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x0184 0x03F4 0x0720 0x1 0x3
+#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7 0x0184 0x03F4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9 0x0184 0x03F4 0x0514 0x3 0x1
+#define MX7D_PAD_ECSPI2_SS0__LCD_RESET 0x0184 0x03F4 0x0000 0x4 0x0
+#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x0184 0x03F4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE 0x0184 0x03F4 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_CD_B__SD1_CD_B 0x0188 0x03F8 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x0188 0x03F8 0x071C 0x2 0x4
+#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX 0x0188 0x03F8 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO 0x0188 0x03F8 0x0558 0x3 0x1
+#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0 0x0188 0x03F8 0x0584 0x4 0x1
+#define MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x0188 0x03F8 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CD_B__CCM_CLKO1 0x0188 0x03F8 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_WP__SD1_WP 0x018C 0x03FC 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_WP__UART6_DCE_TX 0x018C 0x03FC 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_WP__UART6_DTE_RX 0x018C 0x03FC 0x071C 0x2 0x5
+#define MX7D_PAD_SD1_WP__ECSPI4_MOSI 0x018C 0x03FC 0x055C 0x3 0x1
+#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1 0x018C 0x03FC 0x0588 0x4 0x1
+#define MX7D_PAD_SD1_WP__GPIO5_IO1 0x018C 0x03FC 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_WP__CCM_CLKO2 0x018C 0x03FC 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B 0x0190 0x0400 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK 0x0190 0x0400 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS 0x0190 0x0400 0x0718 0x2 0x4
+#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS 0x0190 0x0400 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK 0x0190 0x0400 0x0554 0x3 0x1
+#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2 0x0190 0x0400 0x058C 0x4 0x1
+#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x0190 0x0400 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CLK__SD1_CLK 0x0194 0x0404 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC 0x0194 0x0404 0x06CC 0x1 0x1
+#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS 0x0194 0x0404 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS 0x0194 0x0404 0x0718 0x2 0x5
+#define MX7D_PAD_SD1_CLK__ECSPI4_SS0 0x0194 0x0404 0x0560 0x3 0x1
+#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3 0x0194 0x0404 0x0590 0x4 0x1
+#define MX7D_PAD_SD1_CLK__GPIO5_IO3 0x0194 0x0404 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CMD__SD1_CMD 0x0198 0x0408 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK 0x0198 0x0408 0x06C4 0x1 0x1
+#define MX7D_PAD_SD1_CMD__ECSPI4_SS1 0x0198 0x0408 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0 0x0198 0x0408 0x05AC 0x4 0x1
+#define MX7D_PAD_SD1_CMD__GPIO5_IO4 0x0198 0x0408 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__SD1_DATA0 0x019C 0x040C 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0 0x019C 0x040C 0x06C8 0x1 0x1
+#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX 0x019C 0x040C 0x0724 0x2 0x4
+#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX 0x019C 0x040C 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2 0x019C 0x040C 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1 0x019C 0x040C 0x05B0 0x4 0x1
+#define MX7D_PAD_SD1_DATA0__GPIO5_IO5 0x019C 0x040C 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1 0x019C 0x040C 0x04E4 0x6 0x1
+#define MX7D_PAD_SD1_DATA1__SD1_DATA1 0x01A0 0x0410 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x01A0 0x0410 0x06D0 0x1 0x1
+#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX 0x01A0 0x0410 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX 0x01A0 0x0410 0x0724 0x2 0x5
+#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3 0x01A0 0x0410 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2 0x01A0 0x0410 0x05B4 0x4 0x1
+#define MX7D_PAD_SD1_DATA1__GPIO5_IO6 0x01A0 0x0410 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2 0x01A0 0x0410 0x04E8 0x6 0x1
+#define MX7D_PAD_SD1_DATA2__SD1_DATA2 0x01A4 0x0414 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x01A4 0x0414 0x06D4 0x1 0x1
+#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS 0x01A4 0x0414 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS 0x01A4 0x0414 0x0720 0x2 0x4
+#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY 0x01A4 0x0414 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3 0x01A4 0x0414 0x05B8 0x4 0x1
+#define MX7D_PAD_SD1_DATA2__GPIO5_IO7 0x01A4 0x0414 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3 0x01A4 0x0414 0x04EC 0x6 0x1
+#define MX7D_PAD_SD1_DATA3__SD1_DATA3 0x01A8 0x0418 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x01A8 0x0418 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS 0x01A8 0x0418 0x0720 0x2 0x5
+#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS 0x01A8 0x0418 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1 0x01A8 0x0418 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA 0x01A8 0x0418 0x05A4 0x4 0x1
+#define MX7D_PAD_SD1_DATA3__GPIO5_IO8 0x01A8 0x0418 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4 0x01A8 0x0418 0x04F0 0x6 0x1
+#define MX7D_PAD_SD2_CD_B__SD2_CD_B 0x01AC 0x041C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x01AC 0x041C 0x0568 0x1 0x2
+#define MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x01AC 0x041C 0x0574 0x2 0x2
+#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2 0x01AC 0x041C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB 0x01AC 0x041C 0x05A8 0x4 0x1
+#define MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x01AC 0x041C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0 0x01AC 0x041C 0x06D8 0x6 0x2
+#define MX7D_PAD_SD2_WP__SD2_WP 0x01B0 0x0420 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_WP__ENET1_MDC 0x01B0 0x0420 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_WP__ENET2_MDC 0x01B0 0x0420 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_WP__ECSPI3_SS3 0x01B0 0x0420 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_WP__USB_OTG1_ID 0x01B0 0x0420 0x0734 0x4 0x2
+#define MX7D_PAD_SD2_WP__GPIO5_IO10 0x01B0 0x0420 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1 0x01B0 0x0420 0x06DC 0x6 0x2
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B 0x01B4 0x0424 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK 0x01B4 0x0424 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET 0x01B4 0x0424 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY 0x01B4 0x0424 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID 0x01B4 0x0424 0x0730 0x4 0x2
+#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x01B4 0x0424 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CLK__SD2_CLK 0x01B8 0x0428 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC 0x01B8 0x0428 0x06B8 0x1 0x0
+#define MX7D_PAD_SD2_CLK__MQS_RIGHT 0x01B8 0x0428 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CLK__GPT4_CLK 0x01B8 0x0428 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CLK__GPIO5_IO12 0x01B8 0x0428 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CMD__SD2_CMD 0x01BC 0x042C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK 0x01BC 0x042C 0x06B0 0x1 0x0
+#define MX7D_PAD_SD2_CMD__MQS_LEFT 0x01BC 0x042C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1 0x01BC 0x042C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD 0x01BC 0x042C 0x06EC 0x4 0x1
+#define MX7D_PAD_SD2_CMD__GPIO5_IO13 0x01BC 0x042C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA0__SD2_DATA0 0x01C0 0x0430 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0 0x01C0 0x0430 0x06B4 0x1 0x0
+#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x01C0 0x0430 0x070C 0x2 0x2
+#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX 0x01C0 0x0430 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2 0x01C0 0x0430 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK 0x01C0 0x0430 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x01C0 0x0430 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA1__SD2_DATA1 0x01C4 0x0434 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK 0x01C4 0x0434 0x06BC 0x1 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x01C4 0x0434 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX 0x01C4 0x0434 0x070C 0x2 0x3
+#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1 0x01C4 0x0434 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B 0x01C4 0x0434 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x01C4 0x0434 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA2__SD2_DATA2 0x01C8 0x0438 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC 0x01C8 0x0438 0x06C0 0x1 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS 0x01C8 0x0438 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS 0x01C8 0x0438 0x0708 0x2 0x2
+#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2 0x01C8 0x0438 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN 0x01C8 0x0438 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x01C8 0x0438 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA3__SD2_DATA3 0x01CC 0x043C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0 0x01CC 0x043C 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS 0x01CC 0x043C 0x0708 0x2 0x3
+#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS 0x01CC 0x043C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3 0x01CC 0x043C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD 0x01CC 0x043C 0x06E8 0x4 0x1
+#define MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x01CC 0x043C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CLK__SD3_CLK 0x01D0 0x0440 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CLK__NAND_CLE 0x01D0 0x0440 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CLK__ECSPI4_MISO 0x01D0 0x0440 0x0558 0x2 0x2
+#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC 0x01D0 0x0440 0x06CC 0x3 0x2
+#define MX7D_PAD_SD3_CLK__GPT3_CLK 0x01D0 0x0440 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CLK__GPIO6_IO0 0x01D0 0x0440 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CMD__SD3_CMD 0x01D4 0x0444 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CMD__NAND_ALE 0x01D4 0x0444 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI 0x01D4 0x0444 0x055C 0x2 0x2
+#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK 0x01D4 0x0444 0x06C4 0x3 0x2
+#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1 0x01D4 0x0444 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CMD__GPIO6_IO1 0x01D4 0x0444 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA0__SD3_DATA0 0x01D8 0x0448 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA0__NAND_DATA00 0x01D8 0x0448 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0 0x01D8 0x0448 0x0560 0x2 0x2
+#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0 0x01D8 0x0448 0x06C8 0x3 0x2
+#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2 0x01D8 0x0448 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA0__GPIO6_IO2 0x01D8 0x0448 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA1__SD3_DATA1 0x01DC 0x044C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA1__NAND_DATA01 0x01DC 0x044C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK 0x01DC 0x044C 0x0554 0x2 0x2
+#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK 0x01DC 0x044C 0x06D0 0x3 0x2
+#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1 0x01DC 0x044C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA1__GPIO6_IO3 0x01DC 0x044C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA2__SD3_DATA2 0x01E0 0x0450 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA2__NAND_DATA02 0x01E0 0x0450 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA2__I2C3_SDA 0x01E0 0x0450 0x05E8 0x2 0x3
+#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC 0x01E0 0x0450 0x06D4 0x3 0x2
+#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2 0x01E0 0x0450 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA2__GPIO6_IO4 0x01E0 0x0450 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA3__SD3_DATA3 0x01E4 0x0454 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA3__NAND_DATA03 0x01E4 0x0454 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA3__I2C3_SCL 0x01E4 0x0454 0x05E4 0x2 0x3
+#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0 0x01E4 0x0454 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3 0x01E4 0x0454 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA3__GPIO6_IO5 0x01E4 0x0454 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA4__SD3_DATA4 0x01E8 0x0458 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA4__NAND_DATA04 0x01E8 0x0458 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x01E8 0x0458 0x0704 0x3 0x4
+#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX 0x01E8 0x0458 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX 0x01E8 0x0458 0x04E0 0x4 0x2
+#define MX7D_PAD_SD3_DATA4__GPIO6_IO6 0x01E8 0x0458 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA5__SD3_DATA5 0x01EC 0x045C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA5__NAND_DATA05 0x01EC 0x045C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x01EC 0x045C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX 0x01EC 0x045C 0x0704 0x3 0x5
+#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX 0x01EC 0x045C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA5__GPIO6_IO7 0x01EC 0x045C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_DATA6 0x01F0 0x0460 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA6__NAND_DATA06 0x01F0 0x0460 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_WP 0x01F0 0x0460 0x073C 0x2 0x2
+#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x01F0 0x0460 0x0700 0x3 0x4
+#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS 0x01F0 0x0460 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX 0x01F0 0x0460 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA6__GPIO6_IO8 0x01F0 0x0460 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_DATA7 0x01F4 0x0464 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA7__NAND_DATA07 0x01F4 0x0464 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_CD_B 0x01F4 0x0464 0x0738 0x2 0x2
+#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x01F4 0x0464 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS 0x01F4 0x0464 0x0700 0x3 0x5
+#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX 0x01F4 0x0464 0x04DC 0x4 0x2
+#define MX7D_PAD_SD3_DATA7__GPIO6_IO9 0x01F4 0x0464 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_STROBE__SD3_STROBE 0x01F8 0x0468 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_STROBE__NAND_RE_B 0x01F8 0x0468 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x01F8 0x0468 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x01FC 0x046C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x01FC 0x046C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET 0x01FC 0x046C 0x0000 0x2 0x0
+#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK 0x01FC 0x046C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x01FC 0x046C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x0200 0x0470 0x06A0 0x0 0x0
+#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x0200 0x0470 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x0200 0x0470 0x0714 0x2 0x2
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX 0x0200 0x0470 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x0200 0x0470 0x04DC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD 0x0200 0x0470 0x06E4 0x4 0x1
+#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x0200 0x0470 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET 0x0200 0x0470 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x0204 0x0474 0x06A8 0x0 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x0204 0x0474 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x0204 0x0474 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX 0x0204 0x0474 0x0714 0x2 0x3
+#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x0204 0x0474 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK 0x0204 0x0474 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x0204 0x0474 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET 0x0204 0x0474 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x0208 0x0478 0x06AC 0x0 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS 0x0208 0x0478 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x0208 0x0478 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS 0x0208 0x0478 0x0710 0x2 0x2
+#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x0208 0x0478 0x04E0 0x3 0x3
+#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B 0x0208 0x0478 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x0208 0x0478 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT 0x0208 0x0478 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x020C 0x047C 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x020C 0x047C 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x020C 0x047C 0x0710 0x2 0x3
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS 0x020C 0x047C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x020C 0x047C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN 0x020C 0x047C 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x020C 0x047C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET 0x020C 0x047C 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC 0x0210 0x0480 0x06A4 0x0 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B 0x0210 0x0480 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x0210 0x0480 0x06B8 0x2 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x0210 0x0480 0x05EC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD 0x0210 0x0480 0x06E0 0x4 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x0210 0x0480 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT 0x0210 0x0480 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0 0x0210 0x0480 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x0214 0x0484 0x069C 0x0 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B 0x0214 0x0484 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK 0x0214 0x0484 0x06B0 0x2 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x0214 0x0484 0x05F0 0x3 0x3
+#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA 0x0214 0x0484 0x05CC 0x4 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x0214 0x0484 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT 0x0214 0x0484 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1 0x0214 0x0484 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x0218 0x0488 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_MCLK__NAND_WP_B 0x0218 0x0488 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK 0x0218 0x0488 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY 0x0218 0x0488 0x04F4 0x3 0x3
+#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB 0x0218 0x0488 0x05D0 0x4 0x1
+#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18 0x0218 0x0488 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK 0x0218 0x0488 0x0000 0x7 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x021C 0x048C 0x06C0 0x0 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x021C 0x048C 0x0548 0x1 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x021C 0x048C 0x070C 0x2 0x4
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX 0x021C 0x048C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS 0x021C 0x048C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x021C 0x048C 0x06F0 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4 0x021C 0x048C 0x05BC 0x4 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x021C 0x048C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x0220 0x0490 0x06BC 0x0 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x0220 0x0490 0x054C 0x1 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x0220 0x0490 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX 0x0220 0x0490 0x070C 0x2 0x5
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS 0x0220 0x0490 0x06F0 0x3 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x0220 0x0490 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5 0x0220 0x0490 0x05C0 0x4 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x0220 0x0490 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x0224 0x0494 0x06B4 0x0 0x1
+#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x0224 0x0494 0x0544 0x1 0x1
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x0224 0x0494 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS 0x0224 0x0494 0x0708 0x2 0x4
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS 0x0224 0x0494 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x0224 0x0494 0x06F8 0x3 0x2
+#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6 0x0224 0x0494 0x05C4 0x4 0x1
+#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x0224 0x0494 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7 0x0224 0x0494 0x0610 0x6 0x1
+#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x0228 0x0498 0x0000 0x0 0x0
+#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0 0x0228 0x0498 0x0550 0x1 0x1
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x0228 0x0498 0x0708 0x2 0x5
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS 0x0228 0x0498 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS 0x0228 0x0498 0x06F8 0x3 0x3
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x0228 0x0498 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7 0x0228 0x0498 0x05C8 0x4 0x1
+#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x0228 0x0498 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7 0x0228 0x0498 0x0630 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x022C 0x049C 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT 0x022C 0x049C 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x022C 0x049C 0x05E4 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS 0x022C 0x049C 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS 0x022C 0x049C 0x06F0 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0 0x022C 0x049C 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x022C 0x049C 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3 0x022C 0x049C 0x0620 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x0230 0x04A0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT 0x0230 0x04A0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x0230 0x04A0 0x05E8 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS 0x0230 0x04A0 0x06F0 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS 0x0230 0x04A0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1 0x0230 0x04A0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0230 0x04A0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3 0x0230 0x04A0 0x0600 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x0234 0x04A4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x0234 0x04A4 0x04DC 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK 0x0234 0x04A4 0x0534 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX 0x0234 0x04A4 0x06F4 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX 0x0234 0x04A4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4 0x0234 0x04A4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x0234 0x04A4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2 0x0234 0x04A4 0x061C 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x0238 0x04A8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x0238 0x04A8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI 0x0238 0x04A8 0x053C 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX 0x0238 0x04A8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX 0x0238 0x04A8 0x06F4 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5 0x0238 0x04A8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x0238 0x04A8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2 0x0238 0x04A8 0x05FC 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x023C 0x04AC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1 0x023C 0x04AC 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6 0x023C 0x04AC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x023C 0x04AC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1 0x023C 0x04AC 0x0618 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x0240 0x04B0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x0240 0x04B0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2 0x0240 0x04B0 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7 0x0240 0x04B0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0240 0x04B0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1 0x0240 0x04B0 0x0000 0x6 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x0244 0x04B4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT 0x0244 0x04B4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3 0x0244 0x04B4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8 0x0244 0x04B4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0244 0x04B4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0 0x0244 0x04B4 0x0614 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x0248 0x04B8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT 0x0248 0x04B8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY 0x0248 0x04B8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9 0x0248 0x04B8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0248 0x04B8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0 0x0248 0x04B8 0x05F4 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x024C 0x04BC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX 0x024C 0x04BC 0x04E0 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO 0x024C 0x04BC 0x0538 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x024C 0x04BC 0x05EC 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED 0x024C 0x04BC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x024C 0x04BC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x0250 0x04C0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX 0x0250 0x04C0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0 0x0250 0x04C0 0x0540 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x0250 0x04C0 0x05F0 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ 0x0250 0x04C0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x025C 0x04CC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1 0x025C 0x04CC 0x0564 0x1 0x2
+#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x025C 0x04CC 0x06A0 0x2 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3 0x025C 0x04CC 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ 0x025C 0x04CC 0x057C 0x4 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x025C 0x04CC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1 0x025C 0x04CC 0x04E4 0x6 0x2
+#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0 0x025C 0x04CC 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x0260 0x04D0 0x056C 0x0 0x0
+#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B 0x0260 0x04D0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x0260 0x04D0 0x06A8 0x2 0x1
+#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK 0x0260 0x04D0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE 0x0260 0x04D0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x0260 0x04D0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2 0x0260 0x04D0 0x04E8 0x6 0x2
+#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1 0x0260 0x04D0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_CRS__ENET1_CRS 0x0264 0x04D4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB 0x0264 0x04D4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x0264 0x04D4 0x06AC 0x2 0x1
+#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1 0x0264 0x04D4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0 0x0264 0x04D4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0264 0x04D4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3 0x0264 0x04D4 0x04EC 0x6 0x2
+#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2 0x0264 0x04D4 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_COL__ENET1_COL 0x0268 0x04D8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x0268 0x04D8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x0268 0x04D8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2 0x0268 0x04D8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1 0x0268 0x04D8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_COL__GPIO7_IO15 0x0268 0x04D8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4 0x0268 0x04D8 0x04F0 0x6 0x2
+#define MX7D_PAD_ENET1_COL__CSU_INT_DEB 0x0268 0x04D8 0x0000 0x7 0x0
+
+#endif /* __DTS_IMX7D_PINFUNC_H */
--- /dev/null
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "Freescale i.MX7 SabreSD Board";
+ compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "can2-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_vref_1v8: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze3000@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 0>;
+ wp-gpios = <&gpio5 1 0>;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx7d-sdb {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
+ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
+ >;
+ };
+
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79
+ MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79
+ MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79
+ MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
+ MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
+ MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
+ MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
+ >;
+ };
+
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
+ >;
+ };
+
+ };
+};
--- /dev/null
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ operating-points = <
+ /* KHz uV */
+ 996000 1075000
+ 792000 975000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
+ <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+ clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ intc: interrupt-controller@31001000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x31001000 0x1000>,
+ <0x31002000 0x1000>,
+ <0x31004000 0x2000>,
+ <0x31006000 0x2000>;
+ };
+
+ ckil: clock-cki {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ aips1: aips-bus@30000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x400000>;
+ ranges;
+
+ gpio1: gpio@30200000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@30210000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30210000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@30220000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30220000 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@30230000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30230000 0x10000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@30240000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30240000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@30250000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30250000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@30260000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30260000 0x10000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpt1: gpt@302d0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302d0000 0x10000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt2: gpt@302e0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302e0000 0x10000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt3: gpt@302f0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302f0000 0x10000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt4: gpt@30300000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x30300000 0x10000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+ };
+
+ gpr: iomuxc-gpr@30340000 {
+ compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+ reg = <0x30340000 0x10000>;
+ };
+
+ ocotp: ocotp-ctrl@30350000 {
+ compatible = "syscon";
+ reg = <0x30350000 0x10000>;
+ clocks = <&clks IMX7D_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ anatop: anatop@30360000 {
+ compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x30360000 0x10000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+ reg_1p0d: regulator-vdd1p0d@210 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p0d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ anatop-reg-offset = <0x210>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <8>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1200000>;
+ anatop-enable-bit = <31>;
+ };
+ };
+
+ snvs: snvs@30370000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x30370000 0x10000>;
+
+ snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ clks: ccm@30380000 {
+ compatible = "fsl,imx7d-ccm";
+ reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>;
+ clock-names = "ckil", "osc";
+ };
+
+ src: src@30390000 {
+ compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+ reg = <0x30390000 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+ };
+
+ aips3: aips-bus@30800000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30800000 0x400000>;
+ ranges;
+
+ uart1: serial@30860000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+ <&clks IMX7D_UART1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@30870000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30870000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+ <&clks IMX7D_UART2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@30880000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+ <&clks IMX7D_UART3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c1: i2c@30a20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a20000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@30a30000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a30000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@30a40000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a40000 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@30a50000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a50000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ uart4: serial@30a60000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a60000 0x10000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+ <&clks IMX7D_UART4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@30a70000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a70000 0x10000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+ <&clks IMX7D_UART5_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart6: serial@30a80000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a80000 0x10000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+ <&clks IMX7D_UART6_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart7: serial@30a90000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a90000 0x10000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+ <&clks IMX7D_UART7_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ usdhc1: usdhc@30b40000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b40000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC1_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@30b50000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b50000 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC2_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@30b60000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b60000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC3_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+ };
+ };
+};
/ {
core-module@10000000 {
- compatible = "arm,core-module-integrator", "syscon";
+ compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
/* Use core module LED to indicate CPU load */
syscon {
/* Debug registers mapped as syscon */
- compatible = "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
led@04.0 {
};
&mdio {
+ status = "ok";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
reg = <0>;
--- /dev/null
+/*
+ * Device Tree Source for Keystone 2 Edison Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+ compatible = "ti,keystone-navigator-qmss";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&chipclk13>;
+ ranges;
+ queue-range = <0 0x2000>;
+ linkram0 = <0x100000 0x4000>;
+ linkram1 = <0 0x10000>;
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x2000>;
+ reg = <0x2a40000 0x20000>,
+ <0x2a06000 0x400>,
+ <0x2a02000 0x1000>,
+ <0x2a03000 0x1000>,
+ <0x23a80000 0x20000>,
+ <0x2a80000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+ };
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <658 8>;
+ interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
+ };
+ qpend-1 {
+ qrange = <528 16>;
+ interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+ 0 51 0xf04 0 52 0xf04 0 53 0xf04
+ 0 54 0xf04 0 55 0xf04 0 56 0xf04
+ 0 57 0xf04 0 58 0xf04 0 59 0xf04
+ 0 60 0xf04 0 61 0xf04 0 62 0xf04
+ 0 63 0xf04>;
+ qalloc-by-id;
+ };
+ qpend-2 {
+ qrange = <544 16>;
+ interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+ 0 59 0xf04 0 68 0xf04 0 69 0xf04
+ 0 70 0xf04 0 71 0xf04 0 72 0xf04
+ 0 73 0xf04 0 74 0xf04 0 75 0xf04
+ 0 76 0xf04 0 77 0xf04 0 78 0xf04
+ 0 79 0xf04>;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <4000 64>;
+ };
+ netcp-tx {
+ qrange = <896 128>;
+ qalloc-by-id;
+ };
+ };
+ };
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <8192 128>; /* num_desc desc_size */
+ link-index = <0x4000>;
+ };
+ };
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ clocks = <&papllclk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,navigator-cloud-address = <0x23a80000 0x23a90000
+ 0x23a80000 0x23a90000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x24186000 0x100>,
+ <0x24187000 0x2a0>,
+ <0x24188000 0xb60>,
+ <0x24186100 0x80>,
+ <0x24189000 0x1000>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+};
+
+netcp: netcp@24000000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* NetCP address range */
+ ranges = <0 0x24000000 0x1000000>;
+
+ clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ dma-coherent;
+
+ ti,navigator-dmas = <&dma_gbe 0>,
+ <&dma_gbe 8>,
+ <&dma_gbe 0>;
+ ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+ netcp-devices {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ gbe@200000 { /* ETHSS */
+ label = "netcp-gbe";
+ compatible = "ti,netcp-gbe-9";
+ reg = <0x200000 0x900>, <0x220000 0x20000>;
+ /* enable-ale; */
+ tx-queue = <896>;
+ tx-channel = "nettx";
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
+ };
+ gbe1: interface-1 {
+ slave-port = <1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
+ };
+ };
+
+ secondary-slave-ports {
+ port-2 {
+ slave-port = <2>;
+ link-interface = <2>;
+ };
+ port-3 {
+ slave-port = <3>;
+ link-interface = <2>;
+ };
+ port-4 {
+ slave-port = <4>;
+ link-interface = <2>;
+ };
+ port-5 {
+ slave-port = <5>;
+ link-interface = <2>;
+ };
+ port-6 {
+ slave-port = <6>;
+ link-interface = <2>;
+ };
+ port-7 {
+ slave-port = <7>;
+ link-interface = <2>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = "netrx0";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <528>;
+ tx-completion-queue = <530>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+
+ };
+ interface-1 {
+ rx-channel = "netrx1";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <529>;
+ tx-completion-queue = <531>;
+ efuse-mac = <0>;
+ local-mac-address = [02 18 31 7e 3e 00];
+ netcp-gbe = <&gbe1>;
+ };
+ };
+};
<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
};
};
+ /include/ "k2e-netcp.dtsi"
};
};
};
&mdio {
+ status = "ok";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
reg = <0>;
--- /dev/null
+/*
+ * Device Tree Source for Keystone 2 Hawking Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+ compatible = "ti,keystone-navigator-qmss";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&chipclk13>;
+ ranges;
+ queue-range = <0 0x4000>;
+ linkram0 = <0x100000 0x8000>;
+ linkram1 = <0x0 0x10000>;
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x2000>;
+ reg = <0x2a40000 0x20000>,
+ <0x2a06000 0x400>,
+ <0x2a02000 0x1000>,
+ <0x2a03000 0x1000>,
+ <0x23a80000 0x20000>,
+ <0x2a80000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+
+ qmgr1 {
+ managed-queues = <0x2000 0x2000>;
+ reg = <0x2a60000 0x20000>,
+ <0x2a06400 0x400>,
+ <0x2a04000 0x1000>,
+ <0x2a05000 0x1000>,
+ <0x23aa0000 0x20000>,
+ <0x2aa0000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+ };
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <658 8>;
+ interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
+ };
+ qpend-1 {
+ qrange = <8704 16>;
+ interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+ 0 51 0xf04 0 52 0xf04 0 53 0xf04
+ 0 54 0xf04 0 55 0xf04 0 56 0xf04
+ 0 57 0xf04 0 58 0xf04 0 59 0xf04
+ 0 60 0xf04 0 61 0xf04 0 62 0xf04
+ 0 63 0xf04>;
+ qalloc-by-id;
+ };
+ qpend-2 {
+ qrange = <8720 16>;
+ interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+ 0 59 0xf04 0 68 0xf04 0 69 0xf04
+ 0 70 0xf04 0 71 0xf04 0 72 0xf04
+ 0 73 0xf04 0 74 0xf04 0 75 0xf04
+ 0 76 0xf04 0 77 0xf04 0 78 0xf04
+ 0 79 0xf04>;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <4000 64>;
+ };
+ netcp-tx {
+ qrange = <640 9>;
+ qalloc-by-id;
+ };
+ netcpx-tx {
+ qrange = <8752 8>;
+ qalloc-by-id;
+ };
+ };
+ };
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <8192 128>; /* num_desc desc_size */
+ link-index = <0x4000>;
+ };
+ };
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ clocks = <&papllclk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,navigator-cloud-address = <0x23a80000 0x23a90000
+ 0x23aa0000 0x23ab0000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x2004000 0x100>,
+ <0x2004400 0x120>,
+ <0x2004800 0x300>,
+ <0x2004c00 0x120>,
+ <0x2005000 0x400>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+};
+
+netcp: netcp@2000000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* NetCP address range */
+ ranges = <0 0x2000000 0x100000>;
+
+ clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ dma-coherent;
+
+ ti,navigator-dmas = <&dma_gbe 22>,
+ <&dma_gbe 23>,
+ <&dma_gbe 8>;
+ ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+ netcp-devices {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gbe@90000 { /* ETHSS */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "netcp-gbe";
+ compatible = "ti,netcp-gbe";
+ reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+ /* enable-ale; */
+ tx-queue = <648>;
+ tx-channel = "nettx";
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
+ };
+ gbe1: interface-1 {
+ slave-port = <1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
+ };
+ };
+
+ secondary-slave-ports {
+ port-2 {
+ slave-port = <2>;
+ link-interface = <2>;
+ };
+ port-3 {
+ slave-port = <3>;
+ link-interface = <2>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = "netrx0";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <8704>;
+ tx-completion-queue = <8706>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+
+ };
+ interface-1 {
+ rx-channel = "netrx1";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <8705>;
+ tx-completion-queue = <8707>;
+ efuse-mac = <0>;
+ local-mac-address = [02 18 31 7e 3e 6f];
+ netcp-gbe = <&gbe1>;
+ };
+ };
+};
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x25c>;
};
+ /include/ "k2hk-netcp.dtsi"
};
};
};
&mdio {
+ status = "ok";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
reg = <0>;
--- /dev/null
+/*
+ * Device Tree Source for Keystone 2 Lamarr Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+ compatible = "ti,keystone-navigator-qmss";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&chipclk13>;
+ ranges;
+ queue-range = <0 0x2000>;
+ linkram0 = <0x100000 0x4000>;
+ linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x2000>;
+ reg = <0x2a40000 0x20000>,
+ <0x2a06000 0x400>,
+ <0x2a02000 0x1000>,
+ <0x2a03000 0x1000>,
+ <0x23a80000 0x20000>,
+ <0x2a80000 0x20000>;
+ reg-names = "peek", "status", "config",
+ "region", "push", "pop";
+ };
+ };
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <658 8>;
+ interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
+ };
+ qpend-1 {
+ qrange = <528 16>;
+ interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+ 0 51 0xf04 0 52 0xf04 0 53 0xf04
+ 0 54 0xf04 0 55 0xf04 0 56 0xf04
+ 0 57 0xf04 0 58 0xf04 0 59 0xf04
+ 0 60 0xf04 0 61 0xf04 0 62 0xf04
+ 0 63 0xf04>;
+ qalloc-by-id;
+ };
+ qpend-2 {
+ qrange = <544 16>;
+ interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+ 0 59 0xf04 0 68 0xf04 0 69 0xf04
+ 0 70 0xf04 0 71 0xf04 0 72 0xf04
+ 0 73 0xf04 0 74 0xf04 0 75 0xf04
+ 0 76 0xf04 0 77 0xf04 0 78 0xf04
+ 0 79 0xf04>;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <4000 64>;
+ };
+ netcp-tx {
+ qrange = <896 128>;
+ qalloc-by-id;
+ };
+ };
+ };
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <8192 128>; /* num_desc desc_size */
+ link-index = <0x4000>;
+ };
+ };
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ clocks = <&papllclk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x26186000 0x100>,
+ <0x26187000 0x2a0>,
+ <0x26188000 0xb60>,
+ <0x26186100 0x80>,
+ <0x26189000 0x1000>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+};
+
+netcp: netcp@26000000 {
+ reg = <0x2620110 0x8>;
+ reg-names = "efuse";
+ compatible = "ti,netcp-1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* NetCP address range */
+ ranges = <0 0x26000000 0x1000000>;
+
+ clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ dma-coherent;
+
+ ti,navigator-dmas = <&dma_gbe 0>,
+ <&dma_gbe 8>,
+ <&dma_gbe 0>;
+ ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+ netcp-devices {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ gbe@200000 { /* ETHSS */
+ label = "netcp-gbe";
+ compatible = "ti,netcp-gbe-5";
+ reg = <0x200000 0x900>, <0x220000 0x20000>;
+ /* enable-ale; */
+ tx-queue = <896>;
+ tx-channel = "nettx";
+
+ interfaces {
+ gbe0: interface-0 {
+ slave-port = <0>;
+ link-interface = <1>;
+ phy-handle = <ðphy0>;
+ };
+ gbe1: interface-1 {
+ slave-port = <1>;
+ link-interface = <1>;
+ phy-handle = <ðphy1>;
+ };
+ };
+
+ secondary-slave-ports {
+ port-2 {
+ slave-port = <2>;
+ link-interface = <2>;
+ };
+ port-3 {
+ slave-port = <3>;
+ link-interface = <2>;
+ };
+ };
+ };
+ };
+
+ netcp-interfaces {
+ interface-0 {
+ rx-channel = "netrx0";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <528>;
+ tx-completion-queue = <530>;
+ efuse-mac = <1>;
+ netcp-gbe = <&gbe0>;
+
+ };
+ interface-1 {
+ rx-channel = "netrx1";
+ rx-pool = <1024 12>;
+ tx-pool = <1024 12>;
+ rx-queue-depth = <128 128 0 0>;
+ rx-buffer-size = <1518 4096 0 0>;
+ rx-queue = <529>;
+ tx-completion-queue = <531>;
+ efuse-mac = <0>;
+ local-mac-address = [02 18 31 7e 3e 7f];
+ netcp-gbe = <&gbe1>;
+ };
+ };
+};
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x24c>;
};
+ /include/ "k2l-netcp.dtsi"
};
};
m25p16@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p16";
+ compatible = "st,m25p16", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l4005a";
+ compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l12805d";
+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l1606e";
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p40";
+ compatible = "m25p40", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l12805d";
+ compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l4005a";
+ compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mxicy,mx25l4005a";
+ compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p128@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p128";
+ compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p80";
+ compatible = "st,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "st,m25p80";
+ compatible = "st,m25p80", "jedec,spi-nor";
spi-max-frequency = <86000000>;
reg = <0>;
mode = <0>;
m25p128@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p128";
+ compatible = "m25p128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
+++ /dev/null
-/*
- * kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-
- model = "Overkiz kizbox";
- compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
- chosen {
- bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
- };
-
- memory {
- reg = <0x20000000 0x2000000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
- main_xtal {
- clock-frequency = <18432000>;
- };
- };
-
- ahb {
- apb {
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@fffb0000 {
- status = "okay";
- };
-
- usart1: serial@fffb4000 {
- status = "okay";
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "mii";
- pinctrl-0 = <&pinctrl_macb_rmii
- &pinctrl_macb_rmii_mii_alt>;
- status = "okay";
- };
-
- watchdog@fffffd40 {
- timeout-sec = <15>;
- atmel,max-heartbeat-sec = <16>;
- atmel,min-heartbeat-sec = <0>;
- status = "okay";
- };
- };
-
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- status = "okay";
-
- bootloaderkernel@0 {
- label = "bootloader-kernel";
- reg = <0x0 0xc0000>;
- };
-
- ubi@c0000 {
- label = "ubi";
- reg = <0xc0000 0x7f40000>;
- };
-
- };
-
- usb0: ohci@00500000 {
- num-ports = <1>;
- status = "okay";
- };
- };
-
- i2c@0 {
- status = "okay";
-
- pcf8563@51 {
- /* nxp pcf8563 rtc */
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-
- };
-
- leds {
- compatible = "gpio-leds";
-
- led1g {
- label = "led1:green";
- gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
- led1r {
- label = "led1:red";
- gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
-
- led2g {
- label = "led2:green";
- gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- default-state = "on";
- };
-
- led2r {
- label = "led2:red";
- gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset {
- label = "reset";
- gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
- linux,code = <0x100>;
- gpio-key,wakeup;
- };
-
- mode {
- label = "mode";
- gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
- linux,code = <0x101>;
- gpio-key,wakeup;
- };
- };
-};
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+ model = "LogicPD Zoom DM3730 Torpedo Development Kit";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
+
+ sysboot2 {
+ label = "sysboot2";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
+ linux,code = <BTN_0>;
+ gpio-key,wakeup;
+ };
+
+ sysboot5 {
+ label = "sysboot5";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
+ linux,code = <BTN_1>;
+ gpio-key,wakeup;
+ };
+
+ gpio1 {
+ label = "gpio1";
+ gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
+ linux,code = <BTN_2>;
+ gpio-key,wakeup;
+ };
+
+ gpio2 {
+ label = "gpio2";
+ gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
+ linux,code = <BTN_3>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
+ linux,default-trigger = "cpu0";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
+ linux,default-trigger = "none";
+ };
+ };
+};
+
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+&gpmc {
+ ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9221_pins>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
+ reg = <1 0 0xff>;
+ };
+};
+
+&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+ cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: pinmux_gpio_key_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
+ >;
+ };
+
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
+ >;
+ };
+
+ lan9221_pins: pinmux_lan9221_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
+ >;
+ };
+
+ mmc1_cd: pinmux_mmc1_cd {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
+ >;
+ };
+};
+
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ user0 {
+ label = "user0";
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
+ linux,default-trigger = "none";
+ };
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 29 0>; /* gpio157 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&vmmc2>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
+
+ nand@0,0 {
+ linux,mtd-name = "micron,mt29f4g16abbda3w";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
+
+ x-loader@0 {
+ label = "x-loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "u-boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "u-boot-env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "fs";
+ reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/*
+ * Only found on the wireless SOM. For the SOM without wireless, the pins for
+ * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
+ * gpio157 is not connected. So this should be OK to keep common for now,
+ * probably device tree overlays is the way to go with the various SOM and
+ * jumpering combinations for the long run.
+ */
+&mmc3 {
+ interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+ pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
+ pinctrl-names = "default";
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1283";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&omap3_pmx_core {
+ mmc3_pins: pinmux_mm3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ mmc3_core2_pins: pinmux_mmc3_core2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
+ >;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+ twl_power: power {
+ compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+ ti,use_poweroff;
+ };
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
--- /dev/null
+/*
+ * Common base for NXP LPC18xx and LPC43xx devices.
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-m3";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ /* Temporary hardcode PLL1 until clk drivers are merged */
+ pll1: pll1 {
+ compatible = "fixed-factor-clock";
+ clocks = <&xtal>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <12>;
+ };
+ };
+
+ soc {
+ uart0: serial@40081000 {
+ compatible = "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ uart1: serial@40082000 {
+ compatible = "ns16550a";
+ reg = <0x40082000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <25>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ timer0: timer@40084000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40084000 0x1000>;
+ interrupts = <12>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+
+ timer1: timer@40085000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40085000 0x1000>;
+ interrupts = <13>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+
+ uart2: serial@400c1000 {
+ compatible = "ns16550a";
+ reg = <0x400c1000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <26>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ uart3: serial@400c2000 {
+ compatible = "ns16550a";
+ reg = <0x400c2000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <27>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ timer2: timer@400c3000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x400c3000 0x1000>;
+ interrupts = <14>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+
+ timer3: timer@400c4000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x400c4000 0x1000>;
+ interrupts = <15>;
+ clocks = <&pll1>;
+ clock-names = "timerclk";
+ };
+ };
+};
--- /dev/null
+/*
+ * Hitex LPC4350 Evaluation Board
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4350.dtsi"
+
+/ {
+ model = "Hitex LPC4350 Evaluation Board";
+ compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x28000000 0x800000>; /* 8 MB */
+ };
+};
+
+&pll1 {
+ clock-mult = <15>;
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * NXP LPC4350 and LPC4330 SoC
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+ compatible = "nxp,lpc4350", "nxp,lpc4330";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-m4";
+ };
+ };
+
+ soc {
+ sram0: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+ };
+
+ sram1: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+ };
+
+ sram2: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ };
+ };
+};
--- /dev/null
+/*
+ * Embedded Artist LPC4357 Developer's Kit
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+/ {
+ model = "Embedded Artists' LPC4357 Developer's Kit";
+ compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x28000000 0x2000000>; /* 32 MB */
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+ compatible = "nxp,lpc4357";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-m4";
+ };
+ };
+
+ soc {
+ sram0: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+ };
+
+ sram1: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+ };
+
+ sram2: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ };
+ };
+};
<0 0x10216000 0 0x2000>;
};
- uart0: serial@11006000 {
+ uart0: serial@11002000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
- uart1: serial@11007000 {
+ uart1: serial@11003000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
- uart2: serial@11008000 {
+ uart2: serial@11004000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
};
- uart3: serial@11009000 {
+ uart3: serial@11005000 {
compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DTS_MT8135_PINFUNC_H
+#define __DTS_MT8135_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7)
+
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7)
+
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7)
+
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7)
+
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7)
+
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7)
+
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7)
+
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7)
+
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7)
+
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6)
+
+#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1)
+#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2)
+#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7)
+
+#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1)
+#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2)
+#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6)
+#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7)
+
+#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1)
+#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2)
+#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3)
+#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7)
+
+#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1)
+#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2)
+#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3)
+#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4)
+#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6)
+#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7)
+
+#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1)
+#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2)
+#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3)
+#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4)
+#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5)
+#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7)
+
+#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1)
+#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2)
+#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3)
+#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4)
+#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5)
+#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7)
+
+#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1)
+#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2)
+#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3)
+#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4)
+#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5)
+#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7)
+
+#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1)
+#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2)
+#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3)
+#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4)
+#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5)
+#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6)
+#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7)
+
+#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1)
+#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2)
+#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3)
+#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4)
+#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5)
+#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6)
+#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7)
+
+#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1)
+#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2)
+#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3)
+#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4)
+#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5)
+#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6)
+#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7)
+
+#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1)
+#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2)
+#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3)
+#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4)
+#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7)
+
+#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1)
+#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2)
+#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3)
+#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4)
+#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7)
+
+#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1)
+#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2)
+#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3)
+#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4)
+#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7)
+
+#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1)
+#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2)
+#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3)
+#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4)
+#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7)
+
+#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1)
+#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2)
+#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3)
+#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4)
+#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7)
+
+#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1)
+#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2)
+#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4)
+
+#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1)
+#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2)
+#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4)
+#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5)
+
+#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1)
+#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2)
+#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4)
+#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5)
+
+#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1)
+#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2)
+#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4)
+#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5)
+
+#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1)
+#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2)
+#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3)
+#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4)
+#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5)
+
+#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1)
+#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2)
+#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3)
+#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4)
+#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5)
+
+#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1)
+#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2)
+#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3)
+#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4)
+#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5)
+
+#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1)
+#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2)
+#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3)
+#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4)
+#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5)
+
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7)
+
+#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1)
+#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2)
+
+#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1)
+#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2)
+#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3)
+#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4)
+
+#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1)
+#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2)
+
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7)
+
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7)
+
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7)
+
+#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1)
+#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2)
+#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3)
+#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5)
+#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7)
+
+#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1)
+#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2)
+#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3)
+#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5)
+#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7)
+
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7)
+
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2)
+
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2)
+
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2)
+
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2)
+
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7)
+
+#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1)
+
+#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1)
+#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2)
+
+#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1)
+#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2)
+
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2)
+
+#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1)
+#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2)
+#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3)
+#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4)
+#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5)
+#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7)
+
+#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1)
+#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2)
+#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4)
+#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5)
+#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7)
+
+#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1)
+#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2)
+#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4)
+#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5)
+#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7)
+
+#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1)
+#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2)
+#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5)
+#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7)
+
+#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1)
+#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2)
+#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5)
+#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7)
+
+#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1)
+#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2)
+#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3)
+
+#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1)
+#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2)
+#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3)
+
+#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1)
+#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2)
+#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3)
+
+#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1)
+#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2)
+#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3)
+
+#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1)
+#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2)
+#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3)
+
+#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1)
+#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2)
+#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3)
+
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7)
+
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7)
+
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7)
+
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5)
+
+#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1)
+#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2)
+#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3)
+#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6)
+#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7)
+
+#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1)
+#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3)
+#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6)
+#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7)
+
+#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1)
+#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2)
+#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3)
+#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6)
+#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7)
+
+#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1)
+#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3)
+#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6)
+#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7)
+
+#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1)
+#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2)
+#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5)
+#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6)
+#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7)
+
+#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1)
+#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2)
+#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5)
+#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6)
+#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7)
+
+#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1)
+#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2)
+#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5)
+#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6)
+#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7)
+
+#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1)
+#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2)
+#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3)
+#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4)
+#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5)
+#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6)
+#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7)
+
+#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1)
+#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2)
+#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3)
+#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4)
+#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5)
+#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6)
+#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7)
+
+#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1)
+#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2)
+#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3)
+#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4)
+#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6)
+#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7)
+
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7)
+
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7)
+
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7)
+
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7)
+
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6)
+
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6)
+
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7)
+
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7)
+
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7)
+
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7)
+
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7)
+
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7)
+
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7)
+
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7)
+
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7)
+
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7)
+
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7)
+
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7)
+
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7)
+
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7)
+
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7)
+
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7)
+
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7)
+
+#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2)
+#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3)
+#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4)
+#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7)
+
+#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1)
+#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2)
+#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3)
+#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4)
+#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7)
+
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7)
+
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7)
+
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7)
+
+#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1)
+#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2)
+#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3)
+#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4)
+#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5)
+#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6)
+#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7)
+
+#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1)
+#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2)
+#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3)
+#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4)
+#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5)
+#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6)
+#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7)
+
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7)
+
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7)
+
+#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1)
+#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2)
+#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3)
+#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4)
+#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5)
+#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6)
+#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7)
+
+#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1)
+#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2)
+#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3)
+#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4)
+#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5)
+#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6)
+#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7)
+
+#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1)
+#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2)
+#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3)
+#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4)
+#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5)
+#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6)
+#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7)
+
+#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1)
+#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2)
+#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3)
+#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4)
+#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5)
+#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6)
+#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7)
+
+#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1)
+#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4)
+#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5)
+#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6)
+#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7)
+
+#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1)
+#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2)
+#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5)
+#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6)
+#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7)
+
+#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1)
+#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2)
+#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5)
+#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6)
+#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7)
+
+#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1)
+#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2)
+#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7)
+
+#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1)
+#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2)
+#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3)
+#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5)
+#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7)
+
+#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1)
+#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2)
+#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3)
+#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5)
+#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6)
+#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7)
+
+#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1)
+#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5)
+#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6)
+#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7)
+
+#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1)
+#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2)
+#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5)
+#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7)
+
+#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1)
+#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2)
+#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3)
+#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4)
+#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5)
+#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6)
+
+#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1)
+#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2)
+#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3)
+#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5)
+#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6)
+
+#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1)
+#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2)
+#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4)
+#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5)
+
+#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1)
+#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2)
+#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4)
+#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5)
+
+#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1)
+#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2)
+#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4)
+
+#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1)
+#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2)
+#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5)
+
+#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5)
+
+#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6)
+
+#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1)
+#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2)
+#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4)
+#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5)
+
+#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1)
+#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2)
+#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3)
+#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4)
+#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5)
+
+#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1)
+#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2)
+#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3)
+#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4)
+#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5)
+
+#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1)
+#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2)
+#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3)
+#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4)
+#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5)
+
+#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1)
+#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2)
+#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3)
+#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4)
+#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5)
+
+#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1)
+#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2)
+#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3)
+#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4)
+#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5)
+
+#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1)
+#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2)
+#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3)
+#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4)
+#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5)
+
+#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1)
+#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2)
+#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3)
+#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4)
+#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5)
+
+#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1)
+#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2)
+#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5)
+
+#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1)
+#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2)
+#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5)
+
+#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1)
+#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2)
+#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5)
+
+#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1)
+#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2)
+#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4)
+
+#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1)
+#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2)
+#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4)
+
+#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1)
+#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2)
+#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4)
+
+#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1)
+#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2)
+#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4)
+
+#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1)
+#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2)
+#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4)
+
+#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1)
+#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2)
+#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4)
+
+#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1)
+#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2)
+#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4)
+
+#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1)
+#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2)
+#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4)
+
+#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1)
+#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2)
+#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4)
+
+#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2)
+
+#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2)
+
+#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2)
+
+#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2)
+
+#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2)
+
+#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2)
+
+#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2)
+
+#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2)
+
+#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2)
+
+#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2)
+
+#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2)
+
+#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2)
+
+#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2)
+
+#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2)
+
+#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2)
+
+#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2)
+
+#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+
+#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+
+#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+
+#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+
+#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1)
+#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2)
+
+#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1)
+#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2)
+
+#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1)
+#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2)
+
+#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1)
+#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2)
+
+#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1)
+#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2)
+
+#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1)
+#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2)
+
+#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1)
+#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3)
+
+#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1)
+#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3)
+
+#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1)
+#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2)
+
+#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1)
+#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2)
+
+#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1)
+#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3)
+
+#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1)
+#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3)
+
+#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1)
+#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3)
+#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4)
+#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5)
+#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6)
+#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7)
+
+#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1)
+#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2)
+#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5)
+#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7)
+
+#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1)
+#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2)
+#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5)
+#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7)
+
+#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1)
+#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2)
+#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5)
+#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7)
+
+#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1)
+#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2)
+#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3)
+#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6)
+#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7)
+
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7)
+
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6)
+
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7)
+
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6)
+
+#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1)
+
+#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1)
+#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2)
+#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3)
+#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5)
+#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6)
+
+#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1)
+#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2)
+#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3)
+#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5)
+#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6)
+
+#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1)
+#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2)
+#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3)
+#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4)
+#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5)
+
+#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1)
+#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2)
+#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3)
+#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4)
+#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5)
+
+#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1)
+#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2)
+#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3)
+#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4)
+#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5)
+
+#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1)
+#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2)
+#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3)
+#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4)
+#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5)
+
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6)
+
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6)
+
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6)
+
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5)
+
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5)
+
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5)
+
+#endif /* __DTS_MT8135_PINFUNC_H */
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton64.dtsi"
+#include "mt8135-pinfunc.h"
/ {
compatible = "mediatek,mt8135";
compatible = "simple-bus";
ranges;
+ /*
+ * Pinctrl access register at 0x10005000 and 0x1020c000 through
+ * regmap. Register 0x1000b000 is used by EINT.
+ */
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8135-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ syscfg_pctl_a: syscfg_pctl_a@10005000 {
+ compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
timer: timer@10008000 {
compatible = "mediatek,mt8135-timer",
"mediatek,mt6577-timer";
reg = <0 0x10200030 0 0x1c>;
};
+ syscfg_pctl_b: syscfg_pctl_b@1020c000 {
+ compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+ reg = <0 0x1020c000 0 0x1000>;
+ };
+
gic: interrupt-controller@10211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
otg_drv_vbus: pinmux_otg_drv_vbus {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
>;
};
};
};
};
+
+&gpmc {
+ ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */
+
+ ethernet@0,0 {
+ compatible = "davicom,dm9000";
+ reg = <6 0x000 2
+ 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+ bank-width = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ davicom,no-eeprom;
+
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <1>;
+ gpmc,wait-pin = <0>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+
+ gpmc,cs-on-ns = <6>;
+ gpmc,cs-rd-off-ns = <180>;
+ gpmc,cs-wr-off-ns = <180>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <18>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <144>;
+ gpmc,page-burst-access-ns = <24>;
+ gpmc,bus-turnaround-ns = <90>;
+ gpmc,cycle2cycle-delay-ns = <90>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ };
+};
};
&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
ti,mcbsp = <&mcbsp2>;
};
+ /* GSM audio */
+ sound_telephony {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "GTA04 voice";
+ simple-audio-card,bitclock-master = <&telephony_link_master>;
+ simple-audio-card,frame-master = <&telephony_link_master>;
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp4>;
+ };
+
+ telephony_link_master: simple-audio-card,codec {
+ sound-dai = <>m601_codec>;
+ };
+ };
+
+ gtm601_codec: gsm_codec {
+ compatible = "option,gtm601";
+ #sound-dai-cells = <0>;
+ };
+
spi_lcd {
compatible = "spi-gpio";
#address-cells = <0x1>;
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
+
+ hdq_pins: hdq_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
+ >;
+ };
};
&omap3_pmx_core2 {
&mcbsp2 {
status = "okay";
};
+
+&hdqw1w {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdq_pins>;
+};
+
+&mcbsp4 {
+ status = "okay";
+};
key_enter {
label = "enter";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
- linux,code = <0x0107001c>; /* KEY_ENTER */
+ linux,code = <KEY_ENTER>;
gpio-key,wakeup;
};
key_f1 {
label = "f1";
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
- linux,code = <0x0303003b>; /* KEY_F1 */
+ linux,code = <KEY_F1>;
gpio-key,wakeup;
};
key_f2 {
label = "f2";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
- linux,code = <0x0403003c>; /* KEY_F2 */
+ linux,code = <KEY_F2>;
gpio-key,wakeup;
};
key_f3 {
label = "f3";
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
- linux,code = <0x0503003d>; /* KEY_F3 */
+ linux,code = <KEY_F3>;
gpio-key,wakeup;
};
key_f4 {
label = "f4";
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
- linux,code = <0x0704003e>; /* KEY_F4 */
+ linux,code = <KEY_F4>;
gpio-key,wakeup;
};
key_left {
label = "left";
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
- linux,code = <0x04070069>; /* KEY_LEFT */
+ linux,code = <KEY_LEFT>;
gpio-key,wakeup;
};
key_right {
label = "right";
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
- linux,code = <0x0507006a>; /* KEY_RIGHT */
+ linux,code = <KEY_RIGHT>;
gpio-key,wakeup;
};
key_up {
label = "up";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
- linux,code = <0x06070067>; /* KEY_UP */
+ linux,code = <KEY_UP>;
gpio-key,wakeup;
};
key_down {
label = "down";
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
- linux,code = <0x0707006c>; /* KEY_DOWN */
+ linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
};
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
- touchscreen-max-x = <4096>;
- touchscreen-max-y = <4096>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
};
&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
};
&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&omap5_pmx_core 0x19c>;
};
&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart5_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins>;
};
&cpu0 {
/* The pxa3xx skeleton simply augments the 2xx version */
#include "pxa2xx.dtsi"
-#include "dt-bindings/clock/pxa2xx-clock.h"
+#include "dt-bindings/clock/pxa-clock.h"
/ {
model = "Marvell PXA27x familiy SoC";
marvell,intc-nr-irqs = <34>;
};
+ gpio: gpio@40e00000 {
+ compatible = "intel,pxa27x-gpio";
+ clocks = <&clks CLK_NONE>;
+ };
+
pwm0: pwm@40b00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00000 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
};
pwm1: pwm@40b00010 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00010 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
};
pwm2: pwm@40c00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40c00000 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM0>;
};
pwm3: pwm@40c00010 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40c00010 0x10>;
#pwm-cells = <1>;
+ clocks = <&clks CLK_PWM1>;
+ };
+
+ pwri2c: i2c@40f000180 {
+ compatible = "mrvl,pxa-i2c";
+ reg = <0x40f00180 0x24>;
+ interrupts = <6>;
+ clocks = <&clks CLK_PWRI2C>;
+ status = "disabled";
+ };
+
+ pxa27x_udc: udc@40600000 {
+ compatible = "marvell,pxa270-udc";
+ reg = <0x40600000 0x10000>;
+ interrupts = <11>;
+ clocks = <&clks CLK_USB>;
+ status = "disabled";
+ };
+
+ keypad: keypad@41500000 {
+ compatible = "marvell,pxa27x-keypad";
+ reg = <0x41500000 0x4c>;
+ interrupts = <4>;
+ clocks = <&clks CLK_KEYPAD>;
+ status = "disabled";
};
};
#size-cells = <1>;
ranges;
- pxa2xx_clks: pxa2xx_clks@41300004 {
- compatible = "marvell,pxa-clocks";
+ clks: pxa2xx_clks@41300004 {
+ compatible = "marvell,pxa270-clocks";
#clock-cells = <1>;
status = "okay";
};
};
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clks CLK_OSTIMER>;
+ status = "okay";
+ };
};
* Licensed under GPLv2 or later.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
/ {
model = "Marvell PXA2xx family SoC";
compatible = "mrvl,pxa-uart";
reg = <0x40100000 0x30>;
interrupts = <22>;
+ clocks = <&clks CLK_FFUART>;
status = "disabled";
};
compatible = "mrvl,pxa-uart";
reg = <0x40200000 0x30>;
interrupts = <21>;
+ clocks = <&clks CLK_BTUART>;
status = "disabled";
};
compatible = "mrvl,pxa-uart";
reg = <0x40700000 0x30>;
interrupts = <20>;
+ clocks = <&clks CLK_STUART>;
status = "disabled";
};
compatible = "mrvl,pxa-i2c";
reg = <0x40301680 0x30>;
interrupts = <18>;
+ clocks = <&clks CLK_I2C>;
#address-cells = <0x1>;
#size-cells = <0>;
status = "disabled";
/* The pxa3xx skeleton simply augments the 2xx version */
-/include/ "pxa2xx.dtsi"
+#include "pxa2xx.dtsi"
/ {
model = "Marvell PXA3xx familiy SoC";
compatible = "mrvl,pwri2c";
reg = <0x40f500c0 0x30>;
interrupts = <6>;
+ clocks = <&clks CLK_PWRI2C>;
#address-cells = <0x1>;
#size-cells = <0>;
status = "disabled";
compatible = "marvell,pxa3xx-nand";
reg = <0x43100000 90>;
interrupts = <45>;
+ clocks = <&clks CLK_NAND>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
gpio: gpio@40e00000 {
compatible = "intel,pxa3xx-gpio";
reg = <0x40e00000 0x10000>;
+ clocks = <&clks CLK_GPIO>;
interrupt-names = "gpio0", "gpio1", "gpio_mux";
interrupts = <8 9 10>;
gpio-controller;
#interrupt-cells = <0x2>;
};
};
+
+ clocks {
+ /*
+ * The muxing of external clocks/internal dividers for osc* clock
+ * sources has been hidden under the carpet by now.
+ */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clks: pxa3xx_clks@41300004 {
+ compatible = "marvell,pxa300-clocks";
+ #clock-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ timer@40a00000 {
+ compatible = "marvell,pxa-timer";
+ reg = <0x40a00000 0x20>;
+ interrupts = <26>;
+ clocks = <&clks CLK_OSTIMER>;
+ status = "okay";
+ };
};
};
};
+ rpm@108000 {
+ regulators {
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+ };
+ };
+
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
};
};
+ /* OTG */
+ usb1_phy: phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ usb3_phy: phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget1: gadget@12500000 {
+ status = "ok";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "ok";
+ };
+
+ usb3: usb@12520000 {
+ status = "okay";
+ };
+
+ usb4: usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+ aliases {
+ serial0 = &gsbi7_serial;
+ };
+
soc {
pinctrl@800000 {
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
- };
- };
-
card_detect: card_detect {
mux {
pins = "gpio26";
};
};
+ rpm@108000 {
+ regulators {
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+ };
+ };
+
+ gsbi3: gsbi@16200000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+ i2c3: i2c@16280000 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
};
};
+ sata_phy0: phy@1b400000 {
+ status = "okay";
+ };
+
+ sata0: sata@29000000 {
+ status = "okay";
+ target-supply = <&pm8921_s4>;
+ };
+
+ /* OTG */
+ usb1_phy: phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ usb3_phy: phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ usb4_phy: phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget1: gadget@12500000 {
+ status = "okay";
+ };
+
+ /* OTG */
+ usb1: usb@12500000 {
+ status = "okay";
+ };
+
+ usb3: usb@12520000 {
+ status = "okay";
+ };
+
+ usb4: usb@12530000 {
+ status = "okay";
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
function = "ps_hold";
};
};
+
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+
+ i2c3_pins: i2c3 {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "gsbi3";
+ };
+ };
};
intc: interrupt-controller@2000000 {
};
};
+ gsbi3: gsbi@16200000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x16200000 0x100>;
+ clocks = <&gcc GSBI3_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c3: i2c@16280000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16280000 0x1000>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI3_QUP_CLK>,
+ <&gcc GSBI3_H_CLK>;
+ clock-names = "core", "iface";
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
#address-cells = <1>;
#size-cells = <1>;
ranges;
-
syscon-tcsr = <&tcsr>;
- serial@16640000 {
+ gsbi7_serial: serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
#reset-cells = <1>;
};
+ l2cc: clock-controller@2011000 {
+ compatible = "syscon";
+ reg = <0x2011000 0x1000>;
+ };
+
+ rpm@108000 {
+ compatible = "qcom,rpm-apq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+
+ pm8921_hdmi_switch: hdmi-switch {
+ bias-pull-down;
+ };
+ };
+ };
+
+ usb1_phy: phy@12500000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12500000 0x400>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS1_XCVR_CLK>,
+ <&gcc USB_HS1_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS1_RESET>;
+ reset-names = "link";
+ };
+
+ usb3_phy: phy@12520000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS3_XCVR_CLK>,
+ <&gcc USB_HS3_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS3_RESET>;
+ reset-names = "link";
+ };
+
+ usb4_phy: phy@12530000 {
+ compatible = "qcom,usb-otg-ci";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ dr_mode = "host";
+
+ clocks = <&gcc USB_HS4_XCVR_CLK>,
+ <&gcc USB_HS4_H_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc USB_HS4_RESET>;
+ reset-names = "link";
+ };
+
+ gadget1: gadget@12500000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0x12500000 0x400>;
+ status = "disabled";
+ dr_mode = "peripheral";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ usb-phy = <&usb1_phy>;
+ };
+
+ usb1: usb@12500000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12500000 0x400>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb1_phy>;
+ };
+
+ usb3: usb@12520000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12520000 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb3_phy>;
+ };
+
+ usb4: usb@12530000 {
+ compatible = "qcom,ehci-host";
+ reg = <0x12530000 0x400>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
+ status = "disabled";
+ usb-phy = <&usb4_phy>;
+ };
+
+ sata_phy0: phy@1b400000 {
+ compatible = "qcom,apq8064-sata-phy";
+ status = "disabled";
+ reg = <0x1b400000 0x200>;
+ reg-names = "phy_mem";
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+ #phy-cells = <0>;
+ };
+
+ sata0: sata@29000000 {
+ compatible = "generic-ahci";
+ status = "disabled";
+ reg = <0x29000000 0x180>;
+ interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_iface",
+ "iface",
+ "bus",
+ "rxoob",
+ "core_pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy0>;
+ phy-names = "sata-phy";
+ };
+
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
};
};
+ cpu-pmu {
+ compatible = "qcom,scorpion-mp-pmu";
+ interrupts = <1 9 0x304>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8841_mpps: mpps@a000 {
+ compatible = "qcom,pm8841-mpp";
+ reg = <0xa000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
+ <4 0xa1 0 IRQ_TYPE_NONE>,
+ <4 0xa2 0 IRQ_TYPE_NONE>,
+ <4 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ };
};
usid5: pm8841@5 {
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x100>,
+ <0x6100 0x100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800 0x100>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8941_gpios: gpios@c000 {
+ compatible = "qcom,pm8941-gpio";
+ reg = <0xc000 0x2400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xcf 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>,
+ <0 0xd6 0 IRQ_TYPE_NONE>,
+ <0 0xd7 0 IRQ_TYPE_NONE>,
+ <0 0xd8 0 IRQ_TYPE_NONE>,
+ <0 0xd9 0 IRQ_TYPE_NONE>,
+ <0 0xda 0 IRQ_TYPE_NONE>,
+ <0 0xdb 0 IRQ_TYPE_NONE>,
+ <0 0xdc 0 IRQ_TYPE_NONE>,
+ <0 0xdd 0 IRQ_TYPE_NONE>,
+ <0 0xde 0 IRQ_TYPE_NONE>,
+ <0 0xdf 0 IRQ_TYPE_NONE>,
+ <0 0xe0 0 IRQ_TYPE_NONE>,
+ <0 0xe1 0 IRQ_TYPE_NONE>,
+ <0 0xe2 0 IRQ_TYPE_NONE>,
+ <0 0xe3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8941_mpps: mpps@a000 {
+ compatible = "qcom,pm8941-mpp";
+ reg = <0xa000 0x800>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8941_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8941_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+
+ pm8941_iadc: iadc@3600 {
+ compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+ reg = <0x3600 0x100>,
+ <0x12f1 0x1>;
+ interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+ qcom,external-resistor-micro-ohms = <10000>;
+ };
};
usid1: pm8941@1 {
- compatible ="qcom,spmi-pmic";
+ compatible = "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ wled@d800 {
+ compatible = "qcom,pm8941-wled";
+ reg = <0xd800 0x100>;
+ label = "backlight";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ };
};
};
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x100>,
+ <0x6100 0x100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pma8084_gpios: gpios@c000 {
+ compatible = "qcom,pma8084-gpio";
+ reg = <0xc000 0x1600>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xcf 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>;
+ };
+
+ pma8084_mpps: mpps@a000 {
+ compatible = "qcom,pma8084-mpp";
+ reg = <0xa000 0x800>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
+
+ pma8084_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ };
+
+ pma8084_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_buf_625mv {
+ reg = <VADC_SPARE1>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
};
usid1: pma8084@1 {
&i2c5 {
status = "okay";
- vdd_dvfs: max8973@1b {
+ vdd_dvfs: regulator@1b {
compatible = "maxim,max8973";
reg = <0x1b>;
<0 29 IRQ_TYPE_LEVEL_HIGH>,
<0 30 IRQ_TYPE_LEVEL_HIGH>,
<0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
power-domains = <&pd_c4>;
};
<0 55 IRQ_TYPE_LEVEL_HIGH>,
<0 56 IRQ_TYPE_LEVEL_HIGH>,
<0 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
power-domains = <&pd_c4>;
};
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+ clocks = <&main_div2_clk>, <&main_div2_clk>,
+ <&cpg_clocks R8A73A4_CLK_HP>,
<&cpg_clocks R8A73A4_CLK_HP>;
#clock-cells = <1>;
clock-indices = <
- R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
- R8A73A4_CLK_IIC3
+ R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5
+ R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3
>;
clock-output-names =
- "iic5", "iic4", "iic3";
+ "irqc", "iic5", "iic4", "iic3";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
};
- wm8978: wm8978@1a {
+ wm8978: codec@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8978";
reg = <0x1a>;
};
/* irqpin0: IRQ0 - IRQ7 */
- irqpin0: irqpin@e6900000 {
+ irqpin0: interrupt-controller@e6900000 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
};
/* irqpin1: IRQ8 - IRQ15 */
- irqpin1: irqpin@e6900004 {
+ irqpin1: interrupt-controller@e6900004 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
};
/* irqpin2: IRQ16 - IRQ23 */
- irqpin2: irqpin@e6900008 {
+ irqpin2: interrupt-controller@e6900008 {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
};
/* irqpin3: IRQ24 - IRQ31 */
- irqpin3: irqpin@e690000c {
+ irqpin3: interrupt-controller@e690000c {
compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
status = "disabled";
};
- scifb8: serial@e6c30000 {
+ scifb: serial@e6c30000 {
compatible = "renesas,scifb-r8a7740", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl008k";
+ compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
&i2c0 {
status = "okay";
- ak4643: sound-codec@12 {
+ ak4643: codec@12 {
compatible = "asahi-kasei,ak4643";
#sound-dai-cells = <0>;
reg = <0x12>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl008k";
+ compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
};
/* irqpin: IRQ0 - IRQ3 */
- irqpin: irqpin@fe78001c {
+ irqpin: interrupt-controller@fe78001c {
compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
regulator-always-on;
};
- lan0@18000000 {
+ ethernet@18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18000000 0x100>;
- pinctrl-0 = <&lan0_pins>;
+ pinctrl-0 = <ðernet_pins>;
pinctrl-names = "default";
phy-mode = "mii";
};
};
- lan0_pins: lan0 {
+ ethernet_pins: ethernet {
intc {
renesas,groups = "intc_irq1_b";
renesas,function = "intc";
interrupt-controller;
};
- irqpin0: irqpin@fe780010 {
+ irqpin0: interrupt-controller@fe780010 {
compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
#interrupt-cells = <2>;
status = "disabled";
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl512s";
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
clock-frequency = <100000>;
- ak4643: sound-codec@12 {
+ ak4643: codec@12 {
compatible = "asahi-kasei,ak4643";
#sound-dai-cells = <0>;
reg = <0x12>;
<0 1 IRQ_TYPE_LEVEL_HIGH>,
<0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
};
dmac0: dma-controller@e6700000 {
dma-channels = <13>;
};
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
+ 0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
+ 0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
+ max-frequency = <97500000>;
};
mmcif1: mmc@ee220000 {
dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
+ max-frequency = <97500000>;
};
pfc: pfc@e6060000 {
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
status = "disabled";
};
"iic0", "pciec", "iic1", "ssusb", "cmt1",
"usbdmac0", "usbdmac1";
};
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7790_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
msiof3: spi@e6c90000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
+ reg = <0 0xe6c90000 0 0x0064>;
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
status = "disabled";
};
- rcar_sound: rcar_sound@ec500000 {
+ rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
*
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl512s";
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl512s";
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
status = "okay";
clock-frequency = <100000>;
- ak4643: sound-codec@12 {
+ ak4643: codec@12 {
compatible = "asahi-kasei,ak4643";
#sound-dai-cells = <0>;
reg = <0x12>;
<0 15 IRQ_TYPE_LEVEL_HIGH>,
<0 16 IRQ_TYPE_LEVEL_HIGH>,
<0 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
};
dmac0: dma-controller@e6700000 {
dma-channels = <13>;
};
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
+ 0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
+ 0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
+ max-frequency = <97500000>;
};
sdhi0: sd@ee100000 {
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
status = "disabled";
};
"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
"usbdmac0", "usbdmac1";
};
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7791_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
status = "disabled";
};
- rcar_sound: rcar_sound@ec500000 {
+ rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
*
<0 15 IRQ_TYPE_LEVEL_HIGH>,
<0 16 IRQ_TYPE_LEVEL_HIGH>,
<0 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
};
dmac0: dma-controller@e6700000 {
"sdhi2", "sdhi1", "sdhi0",
"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
};
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7794_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
/*
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
compatible = "active-semi,act8846";
reg = <0x5a>;
status = "okay";
+ system-power-controller;
pinctrl-names = "default";
pinctrl-0 = <&act8846_dvs0_ctl>;
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/pwm/pwm.h>
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
+ * vcc_io directly. Those boards won't be able to power cycle SD cards
+ * but it shouldn't hurt to toggle this pin there anyway.
+ */
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
};
&emmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
status = "okay";
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
};
&i2c0 {
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
};
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
usb {
pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
system-power-controller;
+ vp1-supply = <&vcc_sys>;
+ vp2-supply = <&vcc_sys>;
+ vp3-supply = <&vcc_sys>;
+ vp4-supply = <&vcc_sys>;
+ inl1-supply = <&vcc_sys>;
+ inl2-supply = <&vcc_sys>;
+ inl3-supply = <&vcc_20>;
+
regulators {
vcc_ddr: REG1 {
regulator-name = "vcc_ddr";
status = "okay";
};
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
};
};
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
&vopb {
status = "okay";
};
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/thermal/thermal.h>
/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
spi2 = &spi2;
};
+ arm-pmu {
+ compatible = "arm,cortex-a12-pmu";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_USBHOST1>;
clock-names = "otg";
+ dr_mode = "host";
phys = <&usbphy2>;
phy-names = "usb2-phy";
status = "disabled";
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG0>;
clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
* Copyright (c) 2013 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#clock-cells = <0>;
};
};
+};
- serial@50000000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
- };
+&rtc {
+ status = "okay";
+};
- serial@50004000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
- };
+&sdhci_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+ <&sd1_bus1>, <&sd1_bus4>;
+ bus-width = <4>;
+ broken-cd;
+ status = "okay";
+};
- serial@50008000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_data>;
- };
+&sdhci_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+ <&sd0_bus1>, <&sd0_bus4>;
+ bus-width = <4>;
+ cd-gpios = <&gpf 1 0>;
+ cd-inverted;
+ status = "okay";
+};
- serial@5000C000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_data>;
- };
+&uart_0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+};
- watchdog@53000000 {
- status = "okay";
- };
+&uart_1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+};
- rtc@57000000 {
- status = "okay";
- };
+&uart_2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_data>;
+};
- sdhci@4AC00000 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
- <&sd0_bus1>, <&sd0_bus4>;
- bus-width = <4>;
- cd-gpios = <&gpf 1 0>;
- cd-inverted;
- status = "okay";
- };
+&uart_3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_data>;
+};
- sdhci@4A800000 {
- pinctrl-names = "default";
- pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
- <&sd1_bus1>, <&sd1_bus4>;
- bus-width = <4>;
- broken-cd;
- status = "okay";
- };
+&watchdog {
+ status = "okay";
};
compatible = "samsung,s3c2416";
aliases {
- serial3 = &uart3;
+ serial3 = &uart_3;
};
cpus {
clock-names = "timers";
};
- serial@50000000 {
+ uart_0: serial@50000000 {
compatible = "samsung,s3c2440-uart";
clock-names = "uart", "clk_uart_baud2",
"clk_uart_baud3";
<&clocks SCLK_UART>;
};
- serial@50004000 {
+ uart_1: serial@50004000 {
compatible = "samsung,s3c2440-uart";
clock-names = "uart", "clk_uart_baud2",
"clk_uart_baud3";
<&clocks SCLK_UART>;
};
- serial@50008000 {
+ uart_2: serial@50008000 {
compatible = "samsung,s3c2440-uart";
clock-names = "uart", "clk_uart_baud2",
"clk_uart_baud3";
<&clocks SCLK_UART>;
};
- uart3: serial@5000C000 {
+ uart_3: serial@5000C000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
status = "disabled";
};
- sdhci@4AC00000 {
+ sdhci_1: sdhci@4AC00000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
status = "disabled";
};
- sdhci@4A800000 {
+ sdhci_0: sdhci@4A800000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
status = "disabled";
};
- watchdog@53000000 {
+ watchdog: watchdog@53000000 {
interrupts = <1 9 27 3>;
clocks = <&clocks PCLK_WDT>;
clock-names = "watchdog";
};
- rtc@57000000 {
+ rtc: rtc@57000000 {
compatible = "samsung,s3c2416-rtc";
clocks = <&clocks PCLK_RTC>;
clock-names = "rtc";
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
- <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
#address-cells = <1>;
#size-cells = <1>;
reg = <
- 0x70000000 0x10000000 /* NFC Command Registers */
+ 0x70000000 0x08000000 /* NFC Command Registers */
0xffffc000 0x00000070 /* NFC HSMC regs */
0x00200000 0x00100000 /* NFC SRAM banks */
>;
compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
chosen {
- bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+ bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+ stdout-path = "serial0:115200n8";
};
memory {
rxd3-skew-ps = <400>;
};
};
-
- pmc: pmc@fffffc00 {
- main: mainck {
- clock-frequency = <12000000>;
- };
- };
};
nand0: nand@60000000 {
serial0 = &usart3;
serial1 = &usart4;
serial2 = &usart2;
+ serial3 = &usart0;
+ serial4 = &usart1;
+ serial5 = &uart0;
+ serial6 = &uart1;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
- <&uhpck>;
- clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
- clock-names = "usb_clk", "ehci_clk", "uhpck";
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
#address-cells = <1>;
#size-cells = <1>;
reg = <
- 0x90000000 0x10000000 /* NFC Command Registers */
+ 0x90000000 0x08000000 /* NFC Command Registers */
0xfc05c000 0x00000070 /* NFC HSMC regs */
0x00100000 0x00100000 /* NFC SRAM banks */
>;
clock-names = "mci_clk";
};
+ uart0: serial@f8004000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8004000 0x100>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(22))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(23))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
ssc0: ssc@f8008000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf8008000 0x4000>;
reg = <0xf8028000 0x60>;
};
+ usart0: serial@f802c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf802c000 0x100>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(36))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart1: serial@f8030000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8030000 0x100>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(38))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(39))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
mmc1: mmc@fc000000 {
compatible = "atmel,hsmci";
reg = <0xfc000000 0x600>;
clock-names = "mci_clk";
};
+ uart1: serial@fc004000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfc004000 0x100>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(24))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(25))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
usart2: serial@fc008000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfc008000 0x100>;
status = "disabled";
};
+ spi1: spi@fc018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfc018000 0x100>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(12))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(13))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ spi2: spi@fc01c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfc01c000 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(14))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(15))>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ clocks = <&spi2_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
tcb1: timer@fc020000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xfc020000 0x100>;
compatible = "atmel,at91sam9g46-aes";
reg = <0xfc044000 0x100>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(41)>,
- <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(40)>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(41))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
compatible = "atmel,at91sam9g46-tdes";
reg = <0xfc04c000 0x100>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(42)>,
- <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(43)>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(42))>,
+ <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(43))>;
dma-names = "tx", "rx";
clocks = <&tdes_clk>;
clock-names = "tdes_clk";
compatible = "atmel,at91sam9g46-sha";
reg = <0xfc050000 0x100>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(44)>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
- ranges = <0xfc06a000 0xfc06a000 0x4000>;
+ ranges = <0xfc068000 0xfc068000 0x100
+ 0xfc06a000 0xfc06a000 0x4000>;
/* WARNING: revisit as pin spec has changed */
atmel,mux-mask = <
/* A B C */
};
};
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */
+ AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */
+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */
+ >;
+ };
+ };
+
+ spi2 {
+ pinctrl_spi2: spi2-0 {
+ atmel,pins =
+ <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */
+ AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */
+ AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */
+ >;
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
+ AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
+ >;
+ };
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
label = "SW1";
+ gpio-key,wakeup;
};
};
status = "disabled";
};
- irqpin0: irqpin@e6900000 {
+ irqpin0: interrupt-controller@e6900000 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
control-parent;
};
- irqpin1: irqpin@e6900004 {
+ irqpin1: interrupt-controller@e6900004 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
control-parent;
};
- irqpin2: irqpin@e6900008 {
+ irqpin2: interrupt-controller@e6900008 {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
control-parent;
};
- irqpin3: irqpin@e690000c {
+ irqpin3: interrupt-controller@e690000c {
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
status = "disabled";
};
- scifb8: serial@e6c30000 {
+ scifb: serial@e6c30000 {
compatible = "renesas,scifb-sh73a0", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "altr,socfpga-smp";
cpu@0 {
compatible = "arm,cortex-a9";
clk-phase = <0 135>;
};
+ sdmmc_clk_divided: sdmmc_clk_divided {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&sdmmc_clk>;
+ clk-gate = <0xa0 8>;
+ fixed-divider = <4>;
+ };
+
nand_x_clk: nand_x_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
reset-names = "stmmaceth";
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
status = "disabled";
};
reset-names = "stmmaceth";
snps,multicast-filter-bins = <256>;
snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <4096>;
status = "disabled";
};
fifo-depth = <0x400>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
};
status = "disabled";
};
+ scu: snoop-control-unit@fffec000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xfffec000 0x100>;
+ };
+
spi1: spi@fff01000 {
compatible = "snps,dw-apb-ssi";
#address-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
- aliases {
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
- ethernet2 = &gmac2;
- serial0 = &uart0;
- serial1 = &uart1;
- timer0 = &timer0;
- timer1 = &timer1;
- timer2 = &timer2;
- timer3 = &timer3;
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "altr,socfpga-a10-smp";
cpu@0 {
compatible = "arm,cortex-a9";
#address-cells = <1>;
#size-cells = <0>;
+ cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ cb_intosc_ls_clk: cb_intosc_ls_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ f2s_free_clk: f2s_free_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
osc1: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
- compatible = "altr,socfpga-pll-clock";
- clocks = <&osc1>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>;
+ reg = <0x40>;
+
+ main_mpu_base_clk: main_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x140 0 11>;
+ };
+
+ main_noc_base_clk: main_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ div-reg = <0x144 0 11>;
+ };
+
+ main_emaca_clk: main_emaca_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x68>;
+ };
+
+ main_emacb_clk: main_emacb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x6C>;
+ };
+
+ main_emac_ptp_clk: main_emac_ptp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x70>;
+ };
+
+ main_gpio_db_clk: main_gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x74>;
+ };
+
+ main_sdmmc_clk: main_sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk"
+;
+ clocks = <&main_pll>;
+ reg = <0x78>;
+ };
+
+ main_s2f_usr0_clk: main_s2f_usr0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x7C>;
+ };
+
+ main_s2f_usr1_clk: main_s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x80>;
+ };
+
+ main_hmc_pll_ref_clk: main_hmc_pll_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x84>;
+ };
+
+ main_periph_ref_clk: main_periph_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_pll>;
+ reg = <0x9C>;
+ };
};
periph_pll: periph_pll {
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
- compatible = "altr,socfpga-pll-clock";
- clocks = <&osc1>;
+ compatible = "altr,socfpga-a10-pll-clock";
+ clocks = <&osc1>, <&cb_intosc_ls_clk>,
+ <&f2s_free_clk>, <&main_periph_ref_clk>;
+ reg = <0xC0>;
+
+ peri_mpu_base_clk: peri_mpu_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x140 16 11>;
+ };
+
+ peri_noc_base_clk: peri_noc_base_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ div-reg = <0x144 16 11>;
+ };
+
+ peri_emaca_clk: peri_emaca_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xE8>;
+ };
+
+ peri_emacb_clk: peri_emacb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xEC>;
+ };
+
+ peri_emac_ptp_clk: peri_emac_ptp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF0>;
+ };
+
+ peri_gpio_db_clk: peri_gpio_db_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF4>;
+ };
+
+ peri_sdmmc_clk: peri_sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xF8>;
+ };
+
+ peri_s2f_usr0_clk: peri_s2f_usr0_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0xFC>;
+ };
+
+ peri_s2f_usr1_clk: peri_s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x100>;
+ };
+
+ peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&periph_pll>;
+ reg = <0x104>;
+ };
+ };
+
+ mpu_free_clk: mpu_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x60>;
+ };
+
+ noc_free_clk: noc_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x64>;
+ };
+
+ s2f_user1_free_clk: s2f_user1_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ reg = <0x104>;
+ };
+
+ sdmmc_free_clk: sdmmc_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+ <&osc1>, <&cb_intosc_hs_div2_clk>,
+ <&f2s_free_clk>;
+ fixed-divider = <4>;
+ reg = <0xF8>;
+ };
+
+ l4_sys_free_clk: l4_sys_free_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-perip-clk";
+ clocks = <&noc_free_clk>;
+ fixed-divider = <4>;
+ };
+
+ l4_main_clk: l4_main_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 0 2>;
+ clk-gate = <0x48 1>;
+ };
+
+ l4_mp_clk: l4_mp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 8 2>;
+ clk-gate = <0x48 2>;
+ };
+
+ l4_sp_clk: l4_sp_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&noc_free_clk>;
+ div-reg = <0xA8 16 2>;
+ clk-gate = <0x48 3>;
+ };
+
+ mpu_periph_clk: mpu_periph_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&mpu_free_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0x48 0>;
+ };
+
+ sdmmc_clk: sdmmc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&sdmmc_free_clk>;
+ clk-gate = <0xC8 5>;
+ };
+
+ qspi_clk: qspi_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 11>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ spi_m_clk: spi_m_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_main_clk>;
+ clk-gate = <0xC8 9>;
+ };
+
+ usb_clk: usb_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&l4_mp_clk>;
+ clk-gate = <0xC8 8>;
+ };
+
+ s2f_usr1_clk: s2f_usr1_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&peri_s2f_usr1_clk>;
+ clk-gate = <0xC8 6>;
};
};
};
gmac0: ethernet@ff800000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x44 0>;
reg = <0xff800000 0x2000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
status = "disabled";
};
gmac1: ethernet@ff802000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x48 0>;
reg = <0xff802000 0x2000>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
status = "disabled";
};
gmac2: ethernet@ff804000 {
compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
reg = <0xff804000 0x2000>;
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
/* Filled in by bootloader */
mac-address = [00 00 00 00 00 00];
+ snps,multicast-filter-bins = <256>;
+ snps,perfect-filter-entries = <128>;
+ tx-fifo-depth = <4096>;
+ rx-fifo-depth = <16384>;
+ clocks = <&l4_mp_clk>;
+ clock-names = "stmmaceth";
status = "disabled";
};
reg = <0xff808000 0x1000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
fifo-depth = <0x400>;
+ clocks = <&l4_mp_clk>, <&sdmmc_free_clk>;
+ clock-names = "biu", "ciu";
+ status = "disabled";
};
ocram: sram@ffe00000 {
reg = <0xffd05000 0x100>;
};
+ scu: snoop-control-unit@ffffc000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xffffc000 0x100>;
+ };
+
sysmgr: sysmgr@ffd06000 {
compatible = "altr,sys-mgr", "syscon";
reg = <0xffd06000 0x300>;
+ cpu1-start-addr = <0xffd06230>;
};
/* Local timer */
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffffc600 0x100>;
interrupts = <1 13 0xf04>;
+ clocks = <&mpu_periph_clk>;
};
timer0: timer0@ffc02700 {
compatible = "snps,dw-apb-timer";
interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc02700 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
};
timer1: timer1@ffc02800 {
compatible = "snps,dw-apb-timer";
interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffc02800 0x100>;
+ clocks = <&l4_sp_clk>;
+ clock-names = "timer";
};
timer2: timer2@ffd00000 {
compatible = "snps,dw-apb-timer";
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd00000 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
};
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd01000 0x100>;
+ clocks = <&l4_sys_free_clk>;
+ clock-names = "timer";
};
uart0: serial0@ffc02000 {
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
uart1: serial1@ffc02100 {
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
+ status = "disabled";
};
usbphy0: usbphy@0 {
compatible = "snps,dwc2";
reg = <0xffb00000 0xffff>;
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
compatible = "snps,dw-wdt";
reg = <0xffd00200 0x100>;
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
status = "disabled";
};
compatible = "snps,dw-wdt";
reg = <0xffd00300 0x100>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sys_free_clk>;
status = "disabled";
};
};
+++ /dev/null
-/*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga_arria10.dtsi"
-
-/ {
- model = "Altera SOCFPGA Arria 10";
- compatible = "altr,socfpga-arria10", "altr,socfpga";
-
- chosen {
- bootargs = "console=ttyS0,115200 rootwait";
- };
-
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
- };
-
- soc {
- clkmgr@ffd04000 {
- clocks {
- osc1 {
- clock-frequency = <25000000>;
- };
- };
- };
-
- serial0@ffc02000 {
- status = "okay";
- };
- };
-};
--- /dev/null
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "socfpga_arria10.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Arria 10";
+ compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rootwait";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+ };
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ phy-addr = <0xffffffff>; /* probe for phy addr */
+
+ /*
+ * These skews assume the user's FPGA design is adding 600ps of delay
+ * for TX_CLK on Arria 10.
+ *
+ * All skews are offset since hardware skew values for the ksz9031
+ * range from a negative skew to a positive skew.
+ * See the micrel-ksz90x1.txt Documentation file for details.
+ */
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <1860>; /* 960ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ max-frame-size = <3800>;
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ bus-width = <4>;
+};
&usb1 {
status = "okay";
};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c1{
+ status = "okay";
+
+ accel1: accel1@53{
+ compatible = "adxl34x";
+ reg = <0x53>;
+
+ interrupt-parent = < &portc >;
+ interrupts = <3 2>;
+ };
+};
device_type = "memory";
reg = <0x0 0x40000000>; /* 1GB */
};
+
+ leds: gpio-leds {
+ };
};
&gmac1 {
status = "okay";
};
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
};
+&leds {
+ compatible = "gpio-leds";
+
+ led@0 {
+ label = "led:green:heartbeat";
+ gpios = <&porta 28 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@1 {
+ label = "led:green:D7";
+ gpios = <&portb 19 1>;
+ };
+
+ led@2 {
+ label = "led:green:D8";
+ gpios = <&portb 25 1>;
+ };
+};
+
&mmc {
status = "okay";
};
interrupt-parent = <&intc>;
ranges;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ };
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ ptm@801ae000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x801ae000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ cpu = <&CPU0>;
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+
+ ptm@801af000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x801af000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ cpu = <&CPU1>;
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };
+
+ funnel@801a6000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x801a6000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel output ports */
+ port@0 {
+ reg = <0>;
+ funnel_out_port: endpoint {
+ remote-endpoint =
+ <&replicator_in_port0>;
+ };
+ };
+
+ /* funnel input ports */
+ port@1 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-replicator";
+ clocks = <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "atclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&funnel_out_port>;
+ };
+ };
+ };
+ };
+
+ tpiu@80190000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x80190000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ port {
+ tpiu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+
+ etb@801a4000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0x801a4000 0x1000>;
+
+ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+ clock-names = "apb_pclk", "atclk";
+ port {
+ etb_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
intc: interrupt-controller@a0411000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
<0xa0410100 0x100>;
};
+ scu@a04100000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xa0410000 0x100>;
+ };
+
+ /*
+ * The backup RAM is used for retention during sleep
+ * and various things like spin tables
+ */
+ backupram@80150000 {
+ compatible = "ste,dbx500-backupram";
+ reg = <0x80150000 0x2000>;
+ };
+
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
clocks = <&smp_twd_clk>;
};
+ watchdog@a0410620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0xa0410620 0x20>;
+ interrupts = <1 14 0x304>;
+ clocks = <&smp_twd_clk>;
+ };
+
rtc@80154000 {
compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
};
};
+ /* Sensors mounted on this board variant */
+ i2c@80128000 {
+ lis331dl@1c {
+ /* Accelerometer */
+ compatible = "st,lis331dl-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x1c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_stuib_mode>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+ <19 IRQ_TYPE_EDGE_RISING>;
+ };
+ ak8974@0f {
+ /* Magnetometer */
+ compatible = "asahi-kasei,ak8974";
+ reg = <0x0f>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&magneto_stuib_mode>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
i2c@80110000 {
bu21013_tp@5c {
compatible = "rohm,bu21013_tp";
};
};
};
+ accelerometer {
+ accel_stuib_mode: accel_stuib {
+ /* Accelerometer interrupt lines 1 & 2 */
+ stuib_cfg {
+ pins = "GPIO82_C1", "GPIO83_D3";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ magnetometer {
+ magneto_stuib_mode: magneto_stuib {
+ /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+ stuib_cfg1 {
+ pins = "GPIO31_V3";
+ ste,config = <&gpio_in_pu>;
+ };
+ stuib_cfg2 {
+ pins = "GPIO32_V2";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
};
};
};
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_tvk_mode>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+ <19 IRQ_TYPE_EDGE_RISING>;
};
- lsm303dlm@1e {
+ lsm303dlh@1e {
/* Magnetometer */
- compatible = "st,lsm303dlm-magn";
+ compatible = "st,lsm303dlh-magn";
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
reg = <0x1a>;
};
lis3lv02dl@1d {
- compatible = "st,lis3lv02dl";
- reg = <0x1d>;
+ /* Accelerometer */
+ compatible = "st,lis3lv02dl-accel";
+ reg = <0x1d>;
};
};
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_snowball_mode>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
+ <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
};
- lsm303dlm@1e {
+ lsm303dlh@1e {
/* Magnetometer */
- compatible = "st,lsm303dlm-magn";
+ compatible = "st,lsm303dlh-magn";
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&magneto_snowball_mode>;
+ gpios = <&gpio5 5 0x4>; /* DRDY line */
};
l3g4200d@68 {
/* Gyroscope */
reg = <0x68>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_snowball_mode>;
+ gpios = <&gpio5 6 0x4>; /* DRDY line */
+ interrupt-parent = <&gpio5>;
+ interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
};
lsp001wm@5c {
/* Barometer/pressure sensor */
};
};
};
+ gyro {
+ gyro_snowball_mode: gyro_snowball {
+ snowball_cfg1 {
+ pins =
+ "GPIO166_A22", /* DRDY */
+ "GPIO169_D22"; /* INT */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
magnetometer {
magneto_snowball_mode: magneto_snowball {
snowball_cfg1 {
* published by the Free Software Foundation.
*/
/dts-v1/;
-#include "stihxxx-b2120.dtsi"
#include "stih407.dtsi"
+#include "stihxxx-b2120.dtsi"
/ {
model = "STiH407 B2120";
compatible = "st,stih407-b2120", "st,stih407";
* publishhed by the Free Software Foundation.
*/
#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/reset-controller/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
cache-level = <2>;
};
+ arm-pmu {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
+ restart {
+ compatible = "st,stih407-restart";
+ st,syscfg = <&syscfg_sbc_reg>;
+ status = "okay";
+ };
+
powerdown: powerdown-controller {
compatible = "st,stih407-powerdown";
#reset-cells = <1>;
reg = <0x94b5100 0x1000>;
};
+ irq-syscfg {
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_core>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
+ <&picophyreset STIH407_PICOPHY2_RESET>;
reset-names = "global", "port";
};
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
};
};
+
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi@9841000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9842000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9843000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9844000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ /* SBC SSC */
+ spi@9540000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9541000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ spi@9542000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9542000 0x110>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+
+ status = "disabled";
+ };
+
+ mmc0: sdhci@09060000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+ reg-names = "mmc", "top-mmc-delay";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ bus-width = <8>;
+ non-removable;
+ };
+
+ mmc1: sdhci@09080000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09080000 0x7ff>;
+ reg-names = "mmc";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+ resets = <&softreset STIH407_MMC1_SOFTRESET>;
+ bus-width = <4>;
+ };
+
+ /* Watchdog and Real-Time Clock */
+ lpc@8787000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8787000 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ timeout-sec = <120>;
+ st,syscfg = <&syscfg_core>;
+ st,lpc-mode = <ST_LPC_MODE_WDT>;
+ };
+
+ lpc@8788000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8788000 0x1000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+ st,lpc-mode = <ST_LPC_MODE_RTC>;
+ };
+
+ sata0: sata@9b20000 {
+ compatible = "st,ahci";
+ reg = <0x9b20000 0x1000>;
+
+ interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port0 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+ <&softreset STIH407_SATA0_SOFTRESET>,
+ <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ status = "disabled";
+ };
+
+ sata1: sata@9b28000 {
+ compatible = "st,ahci";
+ reg = <0x9b28000 0x1000>;
+
+ interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port1 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+ <&softreset STIH407_SATA1_SOFTRESET>,
+ <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn",
+ "sw-rst",
+ "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ status = "disabled";
+ };
+
+ st_dwc3: dwc3@8f94000 {
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>,
+ <&softreset STIH407_MIPHY2_SOFTRESET>;
+ reset-names = "powerdown", "softreset";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ ranges;
+
+ status = "disabled";
+
+ dwc3: dwc3@9900000 {
+ compatible = "snps,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ dr_mode = "host";
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2_picophy0>,
+ <&phy_port2 PHY_TYPE_USB3>;
+ };
+ };
};
};
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO5";
+ st,retime-pin-mask = <0x3f>;
};
rc {
#interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO35";
+ st,retime-pin-mask = <0x7f>;
};
i2c4 {
};
};
};
+
+ /* COMMS PWM Module */
+ pwm0: pwm@9810000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@9510000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+ };
};
};
aliases {
ttyAS0 = &sbc_serial0;
};
+
+ soc {
+
+ mmc0: sdhci@09060000 {
+ max-frequency = <200000000>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ };
+ };
};
sata0: sata@fe380000{
status = "okay";
};
+
+ /* SAS PWM Module */
+ pwm0: pwm@fed10000 {
+ status = "okay";
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@fe510000 {
+ status = "okay";
+ };
};
};
};
};
};
+
+ pwm1 {
+ pinctrl_pwm1_chan0_default: pwm1-0-default {
+ st,pins {
+ pwm-out = <&pio3 0 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan1_default: pwm1-1-default {
+ st,pins {
+ pwm-out = <&pio4 4 ALT1 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan2_default: pwm1-2-default {
+ st,pins {
+ pwm-out = <&pio4 6 ALT3 OUT>;
+ };
+ };
+ pinctrl_pwm1_chan3_default: pwm1-3-default {
+ st,pins {
+ pwm-out = <&pio4 7 ALT3 OUT>;
+ };
+ };
+ };
};
pin-controller-front {
st,bank-name = "PIO31";
};
+ pwm0 {
+ pinctrl_pwm0_chan0_default: pwm0-0-default {
+ st,pins {
+ pwm-out = <&pio9 7 ALT2 OUT>;
+ };
+ };
+ };
+
serial2-oe {
pinctrl_serial2_oe: serial2-1 {
st,pins {
};
};
};
+
+ pwm0 {
+ pinctrl_pwm0_chan1_default: pwm0-1-default {
+ st,pins {
+ pwm-out = <&pio13 2 ALT2 OUT>;
+ };
+ };
+ pinctrl_pwm0_chan2_default: pwm0-2-default {
+ st,pins {
+ pwm-out = <&pio15 2 ALT4 OUT>;
+ };
+ };
+ pinctrl_pwm0_chan3_default: pwm0-3-default {
+ st,pins {
+ pwm-out = <&pio17 4 ALT1 OUT>;
+ };
+ };
+ };
+
};
pin-controller-fvdp-fe {
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
/ {
L2: cache-controller {
compatible = "arm,pl310-cache";
cache-level = <2>;
};
+ arm-pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
+ restart {
+ compatible = "st,stih416-restart";
+ st,syscfg = <&syscfg_sbc>;
+ status = "okay";
+ };
+
powerdown: powerdown-controller {
#reset-cells = <1>;
compatible = "st,stih416-powerdown";
reg = <0xfe4b5100 0x8>;
};
+ irq-syscfg {
+ compatible = "st,stih416-irq-syscfg";
+ st,syscfg = <&syscfg_cpu>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+
serial2: serial@fed32000{
compatible = "st,asc";
status = "disabled";
interrupts = <0 210 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
- clocks = <&clk_sysin>;
+ clocks = <&clk_sysin>;
};
i2c@fed40000 {
<&softreset STIH416_USB3_SOFTRESET>;
reset-names = "power", "softreset";
};
+
+ /* SAS PWM Module */
+ pwm0: pwm@fed10000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfed10000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default
+ &pinctrl_pwm0_chan1_default
+ &pinctrl_pwm0_chan2_default
+ &pinctrl_pwm0_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@fe510000 {
+ compatible = "st,sti-pwm";
+ status = "disabled";
+ #pwm-cells = <2>;
+ reg = <0xfe510000 0x68>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ /*
+ * Shared with SBC_OBS_NOTRST. Don't
+ * enable unless you really know what
+ * you're doing.
+ *
+ * &pinctrl_pwm1_chan1_default
+ */
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <3>;
+ };
};
};
st,i2c-min-scl-pulse-width-us = <0>;
st,i2c-min-sda-pulse-width-us = <5>;
};
+
+ mmc1: sdhci@09080000 {
+ status = "okay";
+ };
+
+ mmc0: sdhci@09060000 {
+ status = "okay";
+ max-frequency = <200000000>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ };
+
+ miphy28lp_phy: miphy28lp@9b22000 {
+
+ phy_port0: port@9b22000 {
+ st,osc-rdy;
+ };
+
+ phy_port1: port@9b2a000 {
+ st,osc-force-ext;
+ };
+ };
+
+ st_dwc3: dwc3@8f94000 {
+ status = "okay";
+ };
};
};
status = "okay";
};
+ mmc0: sdhci@09060000 {
+ status = "okay";
+ };
+
+ mmc1: sdhci@09080000 {
+ status = "okay";
+ };
+
/* SSC11 to HDMI */
hdmiddc: i2c@9541000 {
status = "okay";
st,osc-force-ext;
};
};
+
+ st_dwc3: dwc3@8f94000 {
+ status = "okay";
+ };
+
};
};
--- /dev/null
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32F429i-DISCO board";
+ compatible = "st,stm32f429i-disco", "st,stm32f429";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
+ linux,stdout-path = &usart1;
+ };
+
+ memory {
+ reg = <0x90000000 0x800000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+};
+
+&usart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+ clocks {
+ clk_sysclk: clk-sysclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <180000000>;
+ };
+
+ clk_hclk: clk-hclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <180000000>;
+ };
+
+ clk_pclk1: clk-pclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <45000000>;
+ };
+
+ clk_pclk2: clk-pclk2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <90000000>;
+ };
+
+ clk_pmtr1: clk-pmtr1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <90000000>;
+ };
+
+ clk_pmtr2: clk-pmtr2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <180000000>;
+ };
+
+ clk_systick: clk-systick {
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_hclk>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ };
+ };
+
+ soc {
+ timer2: timer@40000000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000000 0x400>;
+ interrupts = <28>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer3: timer@40000400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000400 0x400>;
+ interrupts = <29>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer4: timer@40000800 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000800 0x400>;
+ interrupts = <30>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&clk_pmtr1>;
+ };
+
+ timer6: timer@40001000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001000 0x400>;
+ interrupts = <54>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ timer7: timer@40001400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001400 0x400>;
+ interrupts = <55>;
+ clocks = <&clk_pmtr1>;
+ status = "disabled";
+ };
+
+ usart2: serial@40004400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart3: serial@40004800 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40004800 0x400>;
+ interrupts = <39>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart4: serial@40004c00 {
+ compatible = "st,stm32-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart5: serial@40005000 {
+ compatible = "st,stm32-uart";
+ reg = <0x40005000 0x400>;
+ interrupts = <53>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart7: serial@40007800 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40007800 0x400>;
+ interrupts = <82>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart8: serial@40007c00 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40007c00 0x400>;
+ interrupts = <83>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+
+ usart1: serial@40011000 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&clk_pclk2>;
+ status = "disabled";
+ };
+
+ usart6: serial@40011400 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011400 0x400>;
+ interrupts = <71>;
+ clocks = <&clk_pclk2>;
+ status = "disabled";
+ };
+ };
+};
+
+&systick {
+ clocks = <&clk_systick>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Mele A1000";
compatible = "mele,a1000", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- emac_power_pin_a1000: emac_power_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_a1000: led_pins@0 {
- allwinner,pins = "PH10", "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+ aliases {
+ serial0 = &uart0;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
enable-active-high;
gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
};
+};
+
+&ahci {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ emac_power_pin_a1000: emac_power_pin@0 {
+ allwinner,pins = "PH15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ led_pins_a1000: led_pins@0 {
+ allwinner,pins = "PH10", "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "BA10 tvbox";
compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- usb2_vbus_pin_a: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
- reg_usb2_vbus: usb2-vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ usb2_vbus_pin_a: usb2_vbus_pin@0 {
+ allwinner,pins = "PH12";
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Chuwi V7 CW0825";
compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci1 {
};
};
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@800 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+
+ button@1000 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
+
+ button@1200 {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ channel = <0>;
+ voltage = <1200000>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Cubietech Cubieboard";
compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- led_pins_cubieboard: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- spi0: spi@01c05000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
linux,default-trigger = "heartbeat";
};
};
+};
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
};
-#include "axp209.dtsi"
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
-&cpu0 {
- cpu-supply = <®_dcdc2>;
+&ohci0 {
+ status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_cubieboard: led_pins@0 {
+ allwinner,pins = "PH20", "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Gemei G9 Tablet";
+ compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+/*
+ * TODO:
+ * 2x cameras via CSI
+ * bma250 IRQs
+ * AXP battery management
+ * NAND
+ * OTG
+ * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+
+ /*
+ * TODO: interrupt pins:
+ * int1 - PH00
+ * int2 - PI10
+ */
+ };
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+
+ status = "okay";
+
+ button@158 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <158730>;
+ };
+
+ button@349 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <349206>;
+ };
+
+ button@1142 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1142856>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
+ cd-inverted;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Miniand Hackberry";
compatible = "miniand,hackberry", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy0>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- phy-supply = <®_emac_3v3>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pio: pinctrl@01c20800 {
- pinctrl-names = "default";
- pinctrl-0 = <&hackberry_hogs>;
-
- hackberry_hogs: hogs@0 {
- allwinner,pins = "PH19";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
reg_emac_3v3: emac-3v3 {
enable-active-high;
gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy0>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- pinctrl-0 = <&usb2_vbus_pin_hackberry>;
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hackberry_hogs>;
+
+ hackberry_hogs: hogs@0 {
+ allwinner,pins = "PH19";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "Hyundai A7HD";
compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci1 {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart0;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Jesurun Q5";
+ compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_q5>;
+
+ green {
+ label = "q5:green:usr";
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+ };
+
+ };
+
+ reg_emac_3v3: emac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_power_pin_q5>;
+ regulator-name = "emac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ emac_power_pin_q5: emac_power_pin@0 {
+ allwinner,pins = "PH19";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_q5: led_pins@0 {
+ allwinner,pins = "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "HAOYU Electronics Marsboard A10";
compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
status = "okay";
};
+&emac_sram {
+ status = "okay";
+};
+
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>;
status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "PineRiver Mini X-Plus";
compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- ir0_pins_a: ir0@0 {
- /* The ir receiver is not always populated */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+ chosen {
+ stdout-path = "serial0:115200n8";
};
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&ir0_rx_pins_a {
+ /* The ir receiver is not always populated */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "MK802";
compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci0 {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "MK802ii";
compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci0 {
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Olimex A10-OLinuXino-LIME";
compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
- cpus {
- cpu0: cpu@0 {
- /*
- * The A10-Lime is known to be unstable
- * when running at 1008 MHz
- */
- operating-points = <
- /* kHz uV */
- 912000 1350000
- 864000 1300000
- 624000 1250000
- >;
- cooling-max-level = <2>;
- };
+ aliases {
+ serial0 = &uart0;
};
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- mdio@01c0b080 {
- status = "okay";
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
+ green {
+ label = "a10-olinuxino-lime:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&cpu0 {
+ /*
+ * The A10-Lime is known to be unstable when running at 1008 MHz
+ */
+ operating-points = <
+ /* kHz uV */
+ 912000 1350000
+ 864000 1300000
+ 624000 1250000
+ >;
+ cooling-max-level = <2>;
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&emac_sram {
+ status = "okay";
+};
- pinctrl@01c20800 {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+&mdio {
+ status = "okay";
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- green {
- label = "a10-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
+&ohci0 {
+ status = "okay";
+};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
+&ohci1 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "LinkSprite pcDuino";
compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
-
- pinctrl@01c20800 {
- led_pins_pcduino: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- key_pins_pcduino: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- mdio@01c0b080 {
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+ aliases {
+ serial0 = &uart0;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
};
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_pcduino: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ key_pins_pcduino: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* Copyright 2012 Stefan Roese
* Stefan Roese <sr@denx.de>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
};
framebuffer@1 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>, <&ahb_gates 46>;
clocks = <&cpu>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
- /* kHz uV */
+ /* kHz uV */
1008000 1400000
- 912000 1350000
- 864000 1300000
- 624000 1250000
+ 912000 1350000
+ 864000 1300000
+ 624000 1250000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
usb_clk: clk@01c200cc {
#clock-cells = <1>;
- #reset-cells = <1>;
+ #reset-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ clock-output-names = "usb_ohci0", "usb_ohci1",
+ "usb_phy";
};
spi3_clk: clk@01c200d4 {
#size-cells = <1>;
ranges;
+ sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a: sram@00000000 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0xc000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00000000 0xc000>;
+
+ emac_sram: sram-section@8000 {
+ compatible = "allwinner,sun4i-a10-sram-a3-a4";
+ reg = <0x8000 0x4000>;
+ status = "disabled";
+ };
+ };
+
+ sram_d: sram@00010000 {
+ compatible = "mmio-sram";
+ reg = <0x00010000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00010000 0x1000>;
+
+ otg_sram: sram-section@0000 {
+ compatible = "allwinner,sun4i-a10-sram-d";
+ reg = <0x0000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
dma: dma-controller@01c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
+ allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
"sample";
interrupts = <32>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
"sample";
interrupts = <33>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
"sample";
interrupts = <34>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
"sample";
interrupts = <35>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c13400 {
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- ir0_pins_a: ir0@0 {
- allwinner,pins = "PB3","PB4";
+ ir0_rx_pins_a: ir0@0 {
+ allwinner,pins = "PB4";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- ir1_pins_a: ir1@0 {
- allwinner,pins = "PB22","PB23";
+ ir0_tx_pins_a: ir0@1 {
+ allwinner,pins = "PB3";
+ allwinner,function = "ir0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir1_rx_pins_a: ir1@0 {
+ allwinner,pins = "PB23";
+ allwinner,function = "ir1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir1_tx_pins_a: ir1@1 {
+ allwinner,pins = "PB22";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi0_pins_a: spi0@0 {
- allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+ allwinner,pins = "PI11", "PI12", "PI13";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_cs0_pins_a: spi0_cs0@0 {
+ allwinner,pins = "PI10";
allwinner,function = "spi0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_pins_a: spi1@0 {
- allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,pins = "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_cs0_pins_a: spi1_cs0@0 {
+ allwinner,pins = "PI16";
allwinner,function = "spi1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+ allwinner,pins = "PC20", "PC21", "PC22";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,pins = "PB15", "PB16", "PB17";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_a: spi2_cs0@0 {
+ allwinner,pins = "PC19";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_b: spi2_cs0@1 {
+ allwinner,pins = "PB14";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Auxtek t004 A10s hdmi tv-stick";
+ compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_t004>;
+
+ red {
+ label = "t004-tv-dongle:red:usr";
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+ default-state = "on";
+ };
+ };
+
+ reg_vmmc1: vmmc1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
+ regulator-name = "vmmc1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <®_vmmc1>;
+ bus-width = <4>;
+ non-removable;
+ cap-sdio-irq;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_t004: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
+ allwinner,pins = "PB18";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_t004: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PG13";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "MK802-A10s";
compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial2 = &uart3;
};
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mdio@01c0b080 {
- status = "okay";
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
+ green {
+ label = "a10s-olinuxino-micro:green:usr";
+ gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- cd-inverted;
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- mmc1: mmc@01c10000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
- cd-inverted;
- status = "okay";
- };
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
+&emac_sram {
+ status = "okay";
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
- pinctrl@01c20800 {
- mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PE3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ at24@50 {
+ compatible = "at,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ read-only;
+ };
+};
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button@392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button@601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button@795 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button@987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- uart2: serial@01c28800 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
- status = "okay";
- };
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
- uart3: serial@01c28c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>;
- status = "okay";
- };
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-
- at24@50 {
- compatible = "at,24c16";
- pagesize = <16>;
- reg = <0x50>;
- read-only;
- };
- };
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
+&mdio {
+ status = "okay";
- green {
- label = "a10s-olinuxino-micro:green:usr";
- gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
- status = "okay";
+&pio {
+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PE3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+ allwinner,pins = "PB10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "R7 A10s hdmi tv-stick";
compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc1: mmc@01c10000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_r7: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_r7: led_pins@0 {
- allwinner,pins = "PB2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_r7: usb1_vbus_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ aliases {
+ serial0 = &uart0;
+ };
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
default-state = "on";
};
};
+};
+
+&ehci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_r7>;
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
- status = "okay";
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ led_pins_r7: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_r7>;
+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
};
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
+#include "sun5i.dtsi"
+
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
};
};
- cpus {
- cpu@0 {
- compatible = "arm,cortex-a8";
- };
- };
-
- memory {
- reg = <0x40000000 0x20000000>;
- };
-
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
- clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
- "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
- "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
+ clock-output-names = "ahb_usbotg", "ahb_ehci",
+ "ahb_ohci", "ahb_ss", "ahb_dma",
+ "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+ "ahb_mmc2", "ahb_nand",
+ "ahb_sdram", "ahb_emac", "ahb_ts",
+ "ahb_spi0", "ahb_spi1", "ahb_spi2",
+ "ahb_gps", "ahb_stimer", "ahb_ve",
+ "ahb_tve", "ahb_lcd", "ahb_csi",
+ "ahb_hdmi", "ahb_de_be",
+ "ahb_de_fe", "ahb_iep",
+ "ahb_mali400";
};
apb0_gates: clk@01c20068 {
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
- clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
- "apb0_ir", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
+ clock-output-names = "apb0_codec", "apb0_iis",
+ "apb0_pio", "apb0_ir",
+ "apb0_keypad";
};
apb1_gates: clk@01c2006c {
"apb1_i2c2", "apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3";
};
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_phy";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
- };
};
soc@01c00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ahb_gates 6>;
- #dma-cells = <2>;
- };
-
- spi0: spi@01c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
+ allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
#size-cells = <0>;
};
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <32>;
- status = "disabled";
- };
-
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <33>;
- status = "disabled";
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <34>;
- status = "disabled";
- };
-
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4>;
- reg-names = "phy_ctrl", "pmu1";
- clocks = <&usb_clk 8>;
- clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>;
- reset-names = "usb0_reset", "usb1_reset";
- status = "disabled";
- };
-
- ehci0: usb@01c14000 {
- compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ahb_gates 1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@01c14400 {
- compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <40>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun5i-a10s-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&apb0_gates 5>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PB19", "PB20";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- uart2_pins_a: uart2@0 {
- allwinner,pins = "PC18", "PC19";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- uart3_pins_a: uart3@0 {
- allwinner,pins = "PG9", "PG10";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- emac_pins_a: emac0@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- allwinner,function = "emac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB15", "PB16";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB17", "PB18";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>;
- clocks = <&osc24M>;
- };
-
- wdt: watchdog@01c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
-
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
- };
-
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-a10-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
-
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
status = "disabled";
};
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
- status = "disabled";
- };
-
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
clocks = <&apb1_gates 18>;
status = "disabled";
};
+ };
+};
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
- status = "disabled";
- };
+&pio {
+ compatible = "allwinner,sun5i-a10s-pinctrl";
- i2c0: i2c@01c2ac00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&apb1_gates 0>;
- status = "disabled";
- };
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PB19", "PB20";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- i2c1: i2c@01c2b000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&apb1_gates 1>;
- status = "disabled";
- };
+ uart2_pins_a: uart2@0 {
+ allwinner,pins = "PC18", "PC19";
+ allwinner,function = "uart2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- i2c2: i2c@01c2b400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&apb1_gates 2>;
- status = "disabled";
- };
+ uart3_pins_a: uart3@0 {
+ allwinner,pins = "PG9", "PG10";
+ allwinner,function = "uart3";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- timer@01c60000 {
- compatible = "allwinner,sun5i-a13-hstimer";
- reg = <0x01c60000 0x1000>;
- interrupts = <82>, <83>;
- clocks = <&ahb_gates 28>;
- };
+ emac_pins_a: emac0@0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "emac";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG3", "PG4", "PG5",
+ "PG6", "PG7", "PG8";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&sram_a {
+ emac_sram: sram-section@8000 {
+ compatible = "allwinner,sun4i-a10-sram-a3-a4";
+ reg = <0x8000 0x4000>;
+ status = "disabled";
};
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart1;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_ldo3>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_h702: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
- };
-
- uart1: serial@01c28400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupts = <0>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-
- pcf8563: rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
};
-#include "axp209.dtsi"
-
&cpu0 {
cpu-supply = <®_dcdc2>;
};
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_h702: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_ldo3>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart1;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxinom: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
- allwinner,pins = "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- uart1: serial@01c28400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
default-state = "on";
};
};
+};
+
+&ehci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ led_pins_olinuxinom: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+ allwinner,pins = "PG11";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial0 = &uart1;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
- cd-inverted;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
- ehci0: usb@01c14000 {
- status = "okay";
+ power {
+ gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- pinctrl@01c20800 {
- mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
- allwinner,pins = "PG0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
- allwinner,pins = "PG11";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button@392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button@601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button@795 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button@987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
- uart1: serial@01c28400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
- status = "okay";
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
- power {
- gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+ allwinner,pins = "PG11";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Utoo P66";
+ compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+ i2c_lcd: i2c@0 {
+ /* The lcd panel i2c interface is hooked up via gpios */
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_lcd_pins>;
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
+ <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+ i2c-gpio,delay-us = <5>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ icn8318: touchscreen@40 {
+ compatible = "chipone,icn8318";
+ reg = <0x40>;
+ interrupt-parent = <&pio>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_wake_pin_p66>;
+ wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
+
+&pio {
+ mmc0_cd_pin_p66: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ i2c_lcd_pins: i2c_lcd_pin@0 {
+ allwinner,pins = "PG10", "PG12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ ts_wake_pin_p66: ts_wake_pin@0 {
+ allwinner,pins = "PB3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_ldo3>;
+ status = "okay";
+};
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
-#include <dt-bindings/thermal/thermal.h>
+#include "sun5i.dtsi"
-#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
};
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a8";
- reg = <0x0>;
- clocks = <&cpu>;
- clock-latency = <244144>; /* 8 32k periods */
- operating-points = <
- /* kHz uV */
- 1008000 1400000
- 912000 1350000
- 864000 1300000
- 624000 1200000
- 576000 1200000
- 432000 1200000
- >;
- #cooling-cells = <2>;
- cooling-min-level = <0>;
- cooling-max-level = <5>;
- };
- };
-
thermal-zones {
cpu_thermal {
/* milliseconds */
};
};
- memory {
- reg = <0x40000000 0x20000000>;
- };
-
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
ahb_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-ahb-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb>;
- clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
- "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
- "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
- "ahb_de_fe", "ahb_iep", "ahb_mali400";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
+ clock-output-names = "ahb_usbotg", "ahb_ehci",
+ "ahb_ohci", "ahb_ss", "ahb_dma",
+ "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+ "ahb_mmc2", "ahb_nand",
+ "ahb_sdram", "ahb_spi0",
+ "ahb_spi1", "ahb_spi2",
+ "ahb_stimer", "ahb_ve", "ahb_lcd",
+ "ahb_csi", "ahb_de_be",
+ "ahb_de_fe", "ahb_iep",
+ "ahb_mali400";
};
apb0_gates: clk@01c20068 {
compatible = "allwinner,sun5i-a13-apb0-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb0>;
- clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
+ clock-output-names = "apb0_codec", "apb0_pio",
+ "apb0_ir";
};
apb1_gates: clk@01c2006c {
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_uart1", "apb1_uart3";
};
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_phy";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
- };
};
+};
- soc@01c00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun4i-a10-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <27>;
- clocks = <&ahb_gates 6>;
- #dma-cells = <2>;
- };
-
- spi0: spi@01c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 27>,
- <&dma SUN4I_DMA_DEDICATED 26>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@01c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 9>,
- <&dma SUN4I_DMA_DEDICATED 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <32>;
- status = "disabled";
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- interrupts = <34>;
- status = "disabled";
- };
-
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
- reg = <0x01c13400 0x10 0x01c14800 0x4>;
- reg-names = "phy_ctrl", "pmu1";
- clocks = <&usb_clk 8>;
- clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>;
- reset-names = "usb0_reset", "usb1_reset";
- status = "disabled";
- };
-
- ehci0: usb@01c14000 {
- compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ahb_gates 1>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci0: usb@01c14400 {
- compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <40>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
- phys = <&usbphy 1>;
- phy-names = "usb";
- status = "disabled";
- };
-
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
- clock-names = "ahb", "mod";
- dmas = <&dma SUN4I_DMA_DEDICATED 29>,
- <&dma SUN4I_DMA_DEDICATED 28>;
- dma-names = "rx", "tx";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-a10-ic";
- reg = <0x01c20400 0x400>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun5i-a13-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <28>;
- clocks = <&apb0_gates 5>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
- uart1_pins_a: uart1@0 {
- allwinner,pins = "PE10", "PE11";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- uart1_pins_b: uart1@1 {
- allwinner,pins = "PG3", "PG4";
- allwinner,function = "uart1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB15", "PB16";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB17", "PB18";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0x90>;
- interrupts = <22>;
- clocks = <&osc24M>;
- };
-
- wdt: watchdog@01c20c90 {
- compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <31>;
- status = "disabled";
- };
-
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
- reg = <0x01c23800 0x10>;
- };
-
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-a10-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
- #thermal-sensor-cells = <0>;
- };
-
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <2>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
- status = "disabled";
- };
-
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
- status = "disabled";
- };
-
- i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <7>;
- clocks = <&apb1_gates 0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
+&cpu0 {
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1400000
+ 912000 1350000
+ 864000 1300000
+ 624000 1200000
+ 576000 1200000
+ 432000 1200000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <5>;
+};
- i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <8>;
- clocks = <&apb1_gates 1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
+&pio {
+ compatible = "allwinner,sun5i-a13-pinctrl";
- i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <9>;
- clocks = <&apb1_gates 2>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ uart1_pins_a: uart1@0 {
+ allwinner,pins = "PE10", "PE11";
+ allwinner,function = "uart1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- timer@01c60000 {
- compatible = "allwinner,sun5i-a13-hstimer";
- reg = <0x01c60000 0x1000>;
- interrupts = <82>, <83>;
- clocks = <&ahb_gates 28>;
- };
+ uart1_pins_b: uart1@1 {
+ allwinner,pins = "PG3", "PG4";
+ allwinner,function = "uart1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
--- /dev/null
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ clocks = <&cpu>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * This is a dummy clock, to be used as placeholder on
+ * other mux clocks when a specific parent clock is not
+ * yet implemented. It should be dropped when the driver
+ * is complete.
+ */
+ dummy: dummy {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc24M: clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: clk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll1: clk@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ pll4: clk@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll4";
+ };
+
+ pll5: clk@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: clk@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
+ /* dummy is 200M */
+ cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+ clock-output-names = "cpu";
+ };
+
+ axi: axi@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-axi-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ ahb: ahb@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-ahb-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&axi>, <&cpu>, <&pll6 1>;
+ clock-output-names = "ahb";
+ /*
+ * Use PLL6 as parent, instead of CPU/AXI
+ * which has rate changes due to cpufreq
+ */
+ assigned-clocks = <&ahb>;
+ assigned-clock-parents = <&pll6 1>;
+ };
+
+ apb0: apb0@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb>;
+ clock-output-names = "apb0";
+ };
+
+ apb1: clk@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+ clock-output-names = "apb1";
+ };
+
+ axi_gates: clk@01c2005c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
+ reg = <0x01c2005c 0x4>;
+ clocks = <&axi>;
+ clock-output-names = "axi_dram";
+ };
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0",
+ "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1",
+ "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2",
+ "mmc2_output",
+ "mmc2_sample";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&pll6 1>;
+ clock-output-names = "usb_ohci0", "usb_phy";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun5i-a13-mbus-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a: sram@00000000 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0xc000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00000000 0xc000>;
+ };
+
+ sram_d: sram@00010000 {
+ compatible = "mmio-sram";
+ reg = <0x00010000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00010000 0x1000>;
+
+ otg_sram: sram-section@0000 {
+ compatible = "allwinner,sun4i-a10-sram-d";
+ reg = <0x0000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun4i-a10-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <27>;
+ clocks = <&ahb_gates 6>;
+ #dma-cells = <2>;
+ };
+
+ spi0: spi@01c05000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <10>;
+ clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@01c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb_gates 8>,
+ <&mmc0_clk 0>,
+ <&mmc0_clk 1>,
+ <&mmc0_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ interrupts = <32>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb_gates 9>,
+ <&mmc1_clk 0>,
+ <&mmc1_clk 1>,
+ <&mmc1_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ interrupts = <33>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb_gates 10>,
+ <&mmc2_clk 0>,
+ <&mmc2_clk 1>,
+ <&mmc2_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ interrupts = <34>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usbphy: phy@01c13400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-phy";
+ reg = <0x01c13400 0x10 0x01c14800 0x4>;
+ reg-names = "phy_ctrl", "pmu1";
+ clocks = <&usb_clk 8>;
+ clock-names = "usb_phy";
+ resets = <&usb_clk 0>, <&usb_clk 1>;
+ reset-names = "usb0_reset", "usb1_reset";
+ status = "disabled";
+ };
+
+ ehci0: usb@01c14000 {
+ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+ reg = <0x01c14000 0x100>;
+ interrupts = <39>;
+ clocks = <&ahb_gates 1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@01c14400 {
+ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+ reg = <0x01c14400 0x100>;
+ interrupts = <40>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <12>;
+ clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ intc: interrupt-controller@01c20400 {
+ compatible = "allwinner,sun4i-a10-ic";
+ reg = <0x01c20400 0x400>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ pio: pinctrl@01c20800 {
+ reg = <0x01c20800 0x400>;
+ interrupts = <28>;
+ clocks = <&apb0_gates 5>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PB0", "PB1";
+ allwinner,function = "i2c0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PB15", "PB16";
+ allwinner,function = "i2c1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PB17", "PB18";
+ allwinner,function = "i2c2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_pins_a: mmc2@0 {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13",
+ "PC14", "PC15";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <22>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@01c20c90 {
+ compatible = "allwinner,sun4i-a10-wdt";
+ reg = <0x01c20c90 0x10>;
+ };
+
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ sid: eeprom@01c23800 {
+ compatible = "allwinner,sun4i-a10-sid";
+ reg = <0x01c23800 0x10>;
+ };
+
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun5i-a13-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <29>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <2>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 17>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 19>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <7>;
+ clocks = <&apb1_gates 0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <8>;
+ clocks = <&apb1_gates 1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun4i-a10-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <9>;
+ clocks = <&apb1_gates 2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ timer@01c60000 {
+ compatible = "allwinner,sun5i-a13-hstimer";
+ reg = <0x01c60000 0x1000>;
+ interrupts = <82>, <83>;
+ clocks = <&ahb_gates 28>;
+ };
+ };
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Allwinner A31 APP4 EVB1 Evaluation Board";
compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- soc@01c00000 {
- pio: pinctrl@01c20800 {
- usb1_vbus_pin_a: usb1_vbus_pin@0 {
- allwinner,pins = "PH27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&ehci0 {
+ status = "okay";
+};
- usbphy: phy@01c19400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
+&pio {
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
- ehci0: usb@01c1a000 {
- status = "okay";
- };
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_a>;
+ gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
- };
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_a>;
- gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "WITS A31 Colombus Evaluation Board";
compatible = "wits,colombus", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "fail";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ cd-inverted;
+ status = "okay";
+};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c19400 {
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci1: usb@01c1b000 {
- status = "okay";
- };
-
- pio: pinctrl@01c20800 {
- mmc0_pins_a: mmc0@0 {
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
- allwinner,pins = "PA8";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "fail";
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+&mmc0_pins_a {
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+ mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb2_vbus: usb2-vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_pin_colombus>;
- gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb2_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_vbus_pin_colombus>;
+ gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Merrii A31 Hummingbird";
compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
};
};
};
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
- vmmc-supply = <®_vcc3v0>;
+ vmmc-supply = <&vcc_3v0>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
cd-inverted;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
+ vmmc-supply = <&vcc_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
&ohci0 {
status = "okay";
};
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
+ allwinner,pins = "PG10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&p2wi {
+ status = "okay";
+
+ axp221: pmic@68 {
+ compatible = "x-powers,axp221";
+ reg = <0x68>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ dcdc1-supply = <&vcc_3v0>;
+ dcdc5-supply = <&vcc_dram>;
+
+ regulators {
+ x-powers,dcdc-freq = <3000>;
+
+ vcc_3v0: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-3v0";
+ };
+
+ vdd_cpu: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ vdd_gpu: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ vdd_sys_dll: dcdc4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys-dll";
+ };
+
+ vcc_dram: dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-dram";
+ };
+
+ vcc_wifi: aldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_wifi";
+ };
+
+ avcc: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+ };
+ };
+ };
};
®_usb1_vbus {
--- /dev/null
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Mele I7 Quad top set box";
+ compatible = "mele,i7", "allwinner,sun6i-a31";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_i7>;
+
+ blue {
+ label = "i7:blue:usr";
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ led_pins_i7: led_pins@0 {
+ allwinner,pins = "PH13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_i7: mmc0_cd_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb1_vbus_pin_i7: usb1_vbus_pin@0 {
+ allwinner,pins = "PC27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_i7>;
+ gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
- model = "Mele M9 / A1000G Quad top set box";
+ model = "Mele M9 top set box";
compatible = "mele,m9", "allwinner,sun6i-a31";
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
- cd-inverted;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_m9>;
- usbphy: phy@01c19400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
+ blue {
+ label = "m9:blue:usr";
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
+ };
+};
- ehci0: usb@01c1a000 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ehci1: usb@01c1b000 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- pio: pinctrl@01c20800 {
- led_pins_m9: led_pins@0 {
- allwinner,pins = "PH13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_cd_pin_m9: mmc0_cd_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- usb1_vbus_pin_m9: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- gmac: ethernet@01c30000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ cd-inverted;
+ status = "okay";
+};
- ir@01f02000 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
- };
+&pio {
+ led_pins_m9: led_pins@0 {
+ allwinner,pins = "PH13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_m9>;
-
- blue {
- label = "m9:blue:usr";
- gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
- };
+ mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_m9>;
- gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+ allwinner,pins = "PC27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_usb1_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_m9>;
+ gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Mele A1000G Quad top set box";
+ compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_m9>;
+
+ blue {
+ label = "m9:blue:usr";
+ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ led_pins_m9: led_pins@0 {
+ allwinner,pins = "PH13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+ allwinner,pins = "PC27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_m9>;
+ gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll6 0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <3>;
};
cpu@1 {
};
};
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
clock-output-names = "ahb1";
+
+ /*
+ * Clock AHB1 from PLL6, instead of CPU/AXI which
+ * has rate changes due to cpufreq. Also the DMA
+ * controller requires AHB1 clocked from PLL6.
+ */
+ assigned-clocks = <&ahb1>;
+ assigned-clock-parents = <&pll6 0>;
};
ahb1_gates: clk@01c20060 {
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
- "apb2_i2c2", "apb2_i2c3", "apb2_uart0",
- "apb2_uart1", "apb2_uart2", "apb2_uart3",
- "apb2_uart4", "apb2_uart5";
+ "apb2_i2c2", "apb2_i2c3",
+ "apb2_uart0", "apb2_uart1",
+ "apb2_uart2", "apb2_uart3",
+ "apb2_uart4", "apb2_uart5";
};
mmc0_clk: clk@01c20088 {
usb_clk: clk@01c200cc {
#clock-cells = <1>;
- #reset-cells = <1>;
+ #reset-cells = <1>;
compatible = "allwinner,sun6i-a31-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&osc24M>;
};
/*
- * The following two are dummy clocks, placeholders used in the gmac_tx
- * clock. The gmac driver will choose one parent depending on the PHY
- * interface mode, using clk_set_rate auto-reparenting.
- * The actual TX clock rate is not controlled by the gmac_tx clock.
+ * The following two are dummy clocks, placeholders
+ * used in the gmac_tx clock. The gmac driver will
+ * choose one parent depending on the PHY interface
+ * mode, using clk_set_rate auto-reparenting.
+ *
+ * The actual TX clock rate is not controlled by the
+ * gmac_tx clock.
*/
mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
-
- /* DMA controller requires AHB1 clocked from PLL6 */
- assigned-clocks = <&ahb1>;
- assigned-clock-parents = <&pll6 0>;
};
mmc0: mmc@01c0f000 {
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c19400 {
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
};
timer@01c60000 {
- compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+ compatible = "allwinner,sun6i-a31-hstimer",
+ "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
+ <&pll6 0>;
clock-output-names = "ar100";
};
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ p2wi_pins: p2wi {
+ allwinner,pins = "PL0", "PL1";
+ allwinner,function = "s_p2wi";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ p2wi: i2c@01f03400 {
+ compatible = "allwinner,sun6i-a31-p2wi";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <100000>;
+ resets = <&apb0_rst 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&p2wi_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
/ {
model = "CSQ CS908 top set box";
compatible = "csq,cs908", "allwinner,sun6i-a31s";
-};
-&usbphy {
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&ehci0 {
status = "okay";
};
-&ohci1 {
- status = "okay";
-};
-
-&pio {
- usb1_vbus_pin_csq908: usb1_vbus_pin@0 {
- allwinner,pins = "PC27";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial2 = &uart7;
};
- soc@01c00000 {
- spi0: spi@01c05000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_bananapi>;
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
+ green {
+ label = "bananapi:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
+ };
- ehci0: usb@01c14000 {
- status = "okay";
- };
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_bananapi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+ };
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ahci {
+ status = "okay";
+};
- ahci: sata@01c18000 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
- pinctrl@01c20800 {
- mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- gmac_power_pin_bananapi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_bananapi: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- uart3: serial@01c28c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_b>;
- status = "okay";
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- uart7: serial@01c29c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
- status = "okay";
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+&ohci0 {
+ status = "okay";
+};
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+&ohci1 {
+ status = "okay";
+};
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- phy-supply = <®_gmac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+&pio {
+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_bananapi>;
-
- green {
- label = "bananapi:green:usr";
- gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
- };
+ gmac_power_pin_bananapi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+ led_pins_bananapi: led_pins@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+®_usb1_vbus {
+ status = "okay";
+};
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_power_pin_bananapi>;
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
- };
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>,
+ <&spi0_cs1_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "LeMaker Banana Pro";
compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart4;
+ serial2 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
&ir0 {
pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
+ pinctrl-0 = <&ir0_rx_pins_a>;
status = "okay";
};
&spi0 {
pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins_a>;
+ pinctrl-0 = <&spi0_pins_a>,
+ <&spi0_cs0_pins_a>,
+ <&spi0_cs1_pins_a>;
status = "okay";
};
status = "okay";
};
-&uart2 {
+&uart4 {
pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
+ pinctrl-0 = <&uart4_pins_b>;
status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Cubietech Cubieboard2";
compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
};
+};
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
-#include "axp209.dtsi"
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
-&cpu0 {
- cpu-supply = <®_dcdc2>;
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
};
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ led_pins_cubieboard2: led_pins@0 {
+ allwinner,pins = "PH20", "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Cubietech Cubietruck";
compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <®_vmmc3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc3_pins_a: mmc3@0 {
- /* AP6210 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- vmmc3_pin_cubietruck: vmmc3_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_cubietruck: led_pins@0 {
- allwinner,pins = "PH7", "PH11", "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb0_vbus_pin_a: usb0_vbus_pin@0 {
- allwinner,pins = "PH17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- pwm: pwm@01c20e00 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
- status = "okay";
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
};
};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- reg_usb0_vbus: usb0-vbus {
- pinctrl-0 = <&usb0_vbus_pin_a>;
- gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
-
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
-
reg_vmmc3: vmmc3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
};
};
-#include "axp209.dtsi"
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
&cpu0 {
cpu-supply = <®_dcdc2>;
};
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc3_pins_a {
+ /* AP6210 requires pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vmmc3_pin_cubietruck: vmmc3_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_cubietruck: led_pins@0 {
+ allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PH17";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+ status = "okay";
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+ gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
+
+®_usb0_vbus {
+ pinctrl-0 = <&usb0_vbus_pin_a>;
+ gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*
* Wills Wang <wills.wang.open@gmail.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
serial4 = &uart5;
};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <®_mmc3_vdd>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pio: pinctrl@01c20800 {
- ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
- allwinner,pins = "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- pwm: pwm@01c20e00 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pins_a>;
- status = "okay";
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- uart2: serial@01c28800 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
- status = "okay";
- };
-
- uart3: serial@01c28c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>;
- status = "okay";
- };
-
- uart4: serial@01c29000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
- };
-
- uart5: serial@01c29400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart5_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
-
- i2c3: i2c@01c2b800 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins_a>;
- status = "okay";
- };
-
- spi2: spi@01c17000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_b>;
- status = "okay";
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- phy-supply = <®_gmac_vdd>;
- /* phy reset config */
- snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
- snps,reset-active-low;
- /* wait 1s after reset, otherwise fail to read phy id */
- snps,reset-delays-us = <0 10000 1000000>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
- };
-
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
- gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
- status = "okay";
- };
-
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
- status = "okay";
- };
-
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ chosen {
+ stdout-path = "serial0:115200n8";
};
reg_mmc3_vdd: mmc3_vdd {
gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
};
};
+
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_vdd>;
+ /* phy reset config */
+ snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+ snps,reset-active-low;
+ /* wait 1s after reset, otherwise fail to read phy id */
+ snps,reset-delays-us = <0 10000 1000000>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ status = "okay";
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_mmc3_vdd>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
+ allwinner,pins = "PH15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
+ allwinner,pins = "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins_a>;
+ status = "okay";
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
+ gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+ status = "okay";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_b>,
+ <&spi2_cs0_pins_b>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "I12 / Q5 / QT840A A20 tvbox";
compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <®_vmmc3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc3_pins_a: mmc3@0 {
- /* AP6210 / AP6330 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
- allwinner,pins = "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_i12_tvbox: led_pins@0 {
- allwinner,pins = "PH9", "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ aliases {
+ serial0 = &uart0;
+ };
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- phy-supply = <®_gmac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
};
};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
-
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
-
reg_vmmc3: vmmc3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vmmc3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc3_pins_a {
+ /* AP6210 / AP6330 requires pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+ allwinner,pins = "PH12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+ allwinner,pins = "PH21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_i12_tvbox: led_pins@0 {
+ allwinner,pins = "PH9", "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Mele M3";
compatible = "mele,m3", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- mmc2: mmc@01c11000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins_a>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- non-removable;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_m3>;
- ehci0: usb@01c14000 {
- status = "okay";
+ blue {
+ label = "m3:blue:usr";
+ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
+ };
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- pinctrl@01c20800 {
- led_pins_m3: led_pins@0 {
- allwinner,pins = "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
- };
+&ohci0 {
+ status = "okay";
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_m3>;
+&ohci1 {
+ status = "okay";
+};
- blue {
- label = "m3:blue:usr";
- gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
- };
+&pio {
+ led_pins_m3: led_pins@0 {
+ allwinner,pins = "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+®_usb1_vbus {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
--- /dev/null
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "mk808c";
+ compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Olimex A20-OLinuXino-LIME";
compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- ehci0: usb@01c14000 {
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
- ohci0: usb@01c14400 {
- status = "okay";
+ green {
+ label = "a20-olinuxino-lime:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- pinctrl@01c20800 {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
- };
+&ohci0 {
+ status = "okay";
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
+&ohci1 {
+ status = "okay";
+};
- green {
- label = "a20-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+&pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "Olimex A20-OLinuXino-LIME2";
compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ aliases {
+ serial0 = &uart0;
+ };
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- ehci0: usb@01c14000 {
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
- ohci0: usb@01c14400 {
- status = "okay";
+ green {
+ label = "a20-olinuxino-lime2:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+ reg_axp_ipsout: axp_ipsout {
+ compatible = "regulator-fixed";
+ regulator-name = "axp-ipsout";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- pinctrl@01c20800 {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
- led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ acin-supply = <®_axp_ipsout>;
+ vin2-supply = <®_axp_ipsout>;
+ vin3-supply = <®_axp_ipsout>;
+ ldo24in-supply = <®_axp_ipsout>;
+ ldo3in-supply = <®_axp_ipsout>;
+
+ regulators {
+ vdd_rtc: ldo1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
};
- };
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ avcc: ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- acin-supply = <®_axp_ipsout>;
- vin2-supply = <®_axp_ipsout>;
- vin3-supply = <®_axp_ipsout>;
- ldo24in-supply = <®_axp_ipsout>;
- ldo3in-supply = <®_axp_ipsout>;
-
- regulators {
- vdd_rtc: ldo1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- };
-
- avcc: ldo2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vcc_csi0: ldo3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
-
- vcc_csi1: ldo4 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_cpu: dcdc2 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <2275000>;
- regulator-always-on;
- };
-
- vdd_int: dcdc3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
- };
+ vcc_csi0: ldo3 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
};
- };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ vcc_csi1: ldo4 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
- phy-mode = "rgmii";
- status = "okay";
+ vdd_cpu: dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
+ vdd_int: dcdc3 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
};
};
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- green {
- label = "a20-olinuxino-lime2:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
+&ohci0 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+&ohci1 {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_axp_ipsout: axp_ipsout {
- compatible = "regulator-fixed";
- regulator-name = "axp-ipsout";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
spi1 = &spi2;
};
- soc@01c00000 {
- spi1: spi@01c06000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins_a>;
- status = "okay";
- };
-
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mmc3: mmc@01c12000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
- cd-inverted;
- status = "okay";
- };
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
+ green {
+ label = "a20-olinuxino-micro:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
- ohci0: usb@01c14400 {
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- spi2: spi@01c17000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>;
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- pinctrl@01c20800 {
- mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
- allwinner,pins = "PH11";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button@392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button@601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button@795 {
- label = "Search";
- linux,code = <KEY_SEARCH>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button@987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
-
- button@1184 {
- label = "Esc";
- linux,code = <KEY_ESC>;
- channel = <0>;
- voltage = <1184678>;
- };
-
- button@1398 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <1398804>;
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- uart6: serial@01c29800 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart6_pins_a>;
- status = "okay";
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- uart7: serial@01c29c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart7_pins_a>;
- status = "okay";
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ button@795 {
+ label = "Search";
+ linux,code = <KEY_SEARCH>;
+ channel = <0>;
+ voltage = <795090>;
+ };
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+ button@1184 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1184678>;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ button@1398 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <1398804>;
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- green {
- label = "a20-olinuxino-micro:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ cd-inverted;
+ status = "okay";
+};
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&pio {
+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_ahci_5v {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>,
+ <&spi1_cs0_pins_a>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>,
+ <&spi2_cs0_pins_a>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pins_a>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Orange Pi Mini";
+ compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_orangepi>;
+
+ green {
+ label = "orangepi:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+ };
+
+ blue {
+ label = "orangepi:blue:usr";
+ gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_orangepi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_power_pin_orangepi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_orangepi: led_pins@0 {
+ allwinner,pins = "PH24", "PH25";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+ allwinner,pins = "PH26";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+ gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+ gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Orange Pi";
+ compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_orangepi>;
+
+ green {
+ label = "orangepi:green:usr";
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_orangepi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ };
+};
+
+&ahci {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+ allwinner,pins = "PH22";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_power_pin_orangepi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_orangepi: led_pins@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+ allwinner,pins = "PH26";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+ gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+ gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "LinkSprite pcDuino3 Nano";
+ compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_pcduino3_nano>;
+
+ /* Marked "LED3" on the PCB. */
+ usr1 {
+ label = "pcduino3-nano:green:usr1";
+ gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+ };
+
+ /* Marked "LED4" on the PCB. */
+ usr2 {
+ label = "pcduino3-nano:green:usr2";
+ gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+ };
+ };
+};
+
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_pcduino3_nano: led_pins@0 {
+ allwinner,pins = "PH16", "PH15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
+ allwinner,pins = "PH11";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ status = "okay";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+ gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
model = "LinkSprite pcDuino3";
compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
-
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
-
- ehci0: usb@01c14000 {
- status = "okay";
- };
-
- ohci0: usb@01c14400 {
- status = "okay";
- };
-
- ahci: sata@01c18000 {
- target-supply = <®_ahci_5v>;
- status = "okay";
- };
-
- ehci1: usb@01c1c000 {
- status = "okay";
- };
-
- ohci1: usb@01c1c400 {
- status = "okay";
- };
-
- pinctrl@01c20800 {
- ahci_pwr_pin_a: ahci_pwr_pin@0 {
- allwinner,pins = "PH2";
- };
-
- led_pins_pcduino3: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- key_pins_pcduino3: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ir0: ir@01c21800 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_pins_a>;
- status = "okay";
- };
-
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
- phy = <&phy1>;
- phy-mode = "mii";
- status = "okay";
+ aliases {
+ serial0 = &uart0;
+ };
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
};
};
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ahci_pwr_pin_a {
+ allwinner,pins = "PH2";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
};
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&ir0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_rx_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
+&pio {
+ led_pins_pcduino3: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- reg_ahci_5v: ahci-5v {
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ key_pins_pcduino3: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+®_ahci_5v {
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Wexler TAB7200";
+ compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@571 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <571428>;
+ };
+
+ button@761 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <761904>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
ranges;
framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
<&ahb_gates 44>;
clocks = <&cpu>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
- /* kHz uV */
- 960000 1400000
- 912000 1400000
- 864000 1300000
- 720000 1200000
- 528000 1100000
- 312000 1000000
- 144000 900000
+ /* kHz uV */
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 900000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
compatible = "allwinner,sun4i-a10-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ clock-output-names = "pll6_sata", "pll6_other", "pll6",
+ "pll6_div_4";
};
pll8: clk@01c20040 {
ahb: ahb@01c20054 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
+ compatible = "allwinner,sun5i-a13-ahb-clk";
reg = <0x01c20054 0x4>;
- clocks = <&axi>;
+ clocks = <&axi>, <&pll6 3>, <&pll6 1>;
clock-output-names = "ahb";
+ /*
+ * Use PLL6 as parent, instead of CPU/AXI
+ * which has rate changes due to cpufreq
+ */
+ assigned-clocks = <&ahb>;
+ assigned-clock-parents = <&pll6 3>;
};
ahb_gates: clk@01c20060 {
usb_clk: clk@01c200cc {
#clock-cells = <1>;
- #reset-cells = <1>;
+ #reset-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+ clock-output-names = "usb_ohci0", "usb_ohci1",
+ "usb_phy";
};
spi3_clk: clk@01c200d4 {
};
/*
- * The following two are dummy clocks, placeholders used in the gmac_tx
- * clock. The gmac driver will choose one parent depending on the PHY
- * interface mode, using clk_set_rate auto-reparenting.
- * The actual TX clock rate is not controlled by the gmac_tx clock.
+ * The following two are dummy clocks, placeholders
+ * used in the gmac_tx clock. The gmac driver will
+ * choose one parent depending on the PHY interface
+ * mode, using clk_set_rate auto-reparenting.
+ *
+ * The actual TX clock rate is not controlled by the
+ * gmac_tx clock.
*/
mii_phy_tx_clk: clk@2 {
#clock-cells = <0>;
#size-cells = <1>;
ranges;
+ sram-controller@01c00000 {
+ compatible = "allwinner,sun4i-a10-sram-controller";
+ reg = <0x01c00000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_a: sram@00000000 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0xc000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00000000 0xc000>;
+
+ emac_sram: sram-section@8000 {
+ compatible = "allwinner,sun4i-a10-sram-a3-a4";
+ reg = <0x8000 0x4000>;
+ status = "disabled";
+ };
+ };
+
+ sram_d: sram@00010000 {
+ compatible = "mmio-sram";
+ reg = <0x00010000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00010000 0x1000>;
+
+ otg_sram: sram-section@0000 {
+ compatible = "allwinner,sun4i-a10-sram-d";
+ reg = <0x0000 0x1000>;
+ status = "disabled";
+ };
+ };
+ };
+
nmi_intc: interrupt-controller@01c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 17>;
+ allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
"sample";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
"sample";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
"sample";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
"sample";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
usbphy: phy@01c13400 {
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ uart4_pins_b: uart4@1 {
+ allwinner,pins = "PH4", "PH5";
+ allwinner,function = "uart4";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
uart5_pins_a: uart5@0 {
allwinner,pins = "PI10", "PI11";
allwinner,function = "uart5";
};
spi0_pins_a: spi0@0 {
- allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+ allwinner,pins = "PI11", "PI12", "PI13";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_cs0_pins_a: spi0_cs0@0 {
+ allwinner,pins = "PI10";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_cs1_pins_a: spi0_cs1@0 {
+ allwinner,pins = "PI14";
allwinner,function = "spi0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_pins_a: spi1@0 {
- allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,pins = "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_cs0_pins_a: spi1_cs0@0 {
+ allwinner,pins = "PI16";
allwinner,function = "spi1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,pins = "PC20", "PC21", "PC22";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+ allwinner,pins = "PB15", "PB16", "PB17";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_a: spi2_cs0@0 {
+ allwinner,pins = "PC19";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_cs0_pins_b: spi2_cs0@1 {
+ allwinner,pins = "PB14";
allwinner,function = "spi2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc2_pins_a: mmc2@0 {
- allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+ allwinner,pins = "PC6", "PC7", "PC8",
+ "PC9", "PC10", "PC11";
allwinner,function = "mmc2";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc3_pins_a: mmc3@0 {
- allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+ allwinner,pins = "PI4", "PI5", "PI6",
+ "PI7", "PI8", "PI9";
allwinner,function = "mmc3";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- ir0_pins_a: ir0@0 {
- allwinner,pins = "PB3","PB4";
+ ir0_rx_pins_a: ir0@0 {
+ allwinner,pins = "PB4";
allwinner,function = "ir0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- ir1_pins_a: ir1@0 {
- allwinner,pins = "PB22","PB23";
+ ir0_tx_pins_a: ir0@1 {
+ allwinner,pins = "PB3";
+ allwinner,function = "ir0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir1_rx_pins_a: ir1@0 {
+ allwinner,pins = "PB23";
+ allwinner,function = "ir1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ir1_tx_pins_a: ir1@1 {
+ allwinner,pins = "PB22";
allwinner,function = "ir1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-a10-ts";
+ compatible = "allwinner,sun5i-a13-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
};
i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
};
i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
};
i2c3: i2c@01c2b800 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
};
i2c4: i2c@01c2c000 {
- compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+ compatible = "allwinner,sun7i-a20-i2c",
+ "allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 15>;
--- /dev/null
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ interrupt-parent = <&gic>;
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll6 0>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ cpus {
+ enable-method = "allwinner,sun8i-a23";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll1: clk@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ /* dummy clock until actually implemented */
+ pll5: pll5_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "pll5";
+ };
+
+ pll6: clk@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun6i-a31-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6", "pll6x2";
+ };
+
+ cpu: cpu_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20050 0x4>;
+
+ /*
+ * PLL1 is listed twice here.
+ * While it looks suspicious, it's actually documented
+ * that way both in the datasheet and in the code from
+ * Allwinner.
+ */
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+ clock-output-names = "cpu";
+ };
+
+ axi: axi_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-axi-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ ahb1: ahb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-ahb1-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+ clock-output-names = "ahb1";
+ };
+
+ apb1: apb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb1>;
+ clock-output-names = "apb1";
+ };
+
+ ahb1_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb1>;
+ clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+ "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+ "ahb1_nand", "ahb1_sdram",
+ "ahb1_hstimer", "ahb1_spi0",
+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+ "ahb1_csi", "ahb1_be", "ahb1_fe",
+ "ahb1_gpu", "ahb1_spinlock",
+ "ahb1_drc";
+ };
+
+ apb1_gates: clk@01c20068 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb1>;
+ clock-output-names = "apb1_codec", "apb1_pio",
+ "apb1_daudio0", "apb1_daudio1";
+ };
+
+ apb2: clk@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clock-output-names = "apb2";
+ };
+
+ apb2_gates: clk@01c2006c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb2>;
+ clock-output-names = "apb2_i2c0", "apb2_i2c1",
+ "apb2_i2c2", "apb2_uart0",
+ "apb2_uart1", "apb2_uart2",
+ "apb2_uart3", "apb2_uart4";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 0>;
+ clock-output-names = "mmc0",
+ "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 0>;
+ clock-output-names = "mmc1",
+ "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 0>;
+ clock-output-names = "mmc2",
+ "mmc2_output",
+ "mmc2_sample";
+ };
+
+ usb_clk: clk@01c200cc {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun8i-a23-usb-clk";
+ reg = <0x01c200cc 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
+ "usb_hsic_12M", "usb_ohci0";
+ };
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dma: dma-controller@01c02000 {
+ compatible = "allwinner,sun8i-a23-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 6>;
+ resets = <&ahb1_rst 6>;
+ #dma-cells = <1>;
+ };
+
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ahb1_gates 8>,
+ <&mmc0_clk 0>,
+ <&mmc0_clk 1>,
+ <&mmc0_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb1_rst 8>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ahb1_gates 9>,
+ <&mmc1_clk 0>,
+ <&mmc1_clk 1>,
+ <&mmc1_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb1_rst 9>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ahb1_gates 10>,
+ <&mmc2_clk 0>,
+ <&mmc2_clk 1>,
+ <&mmc2_clk 2>;
+ clock-names = "ahb",
+ "mmc",
+ "output",
+ "sample";
+ resets = <&ahb1_rst 10>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pio: pinctrl@01c20800 {
+ /* compatible gets set in SoC specific dtsi file */
+ reg = <0x01c20800 0x400>;
+ /* interrupts get set in SoC specific dtsi file */
+ clocks = <&apb1_gates 5>;
+ gpio-controller;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PF2", "PF4";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins_a: mmc0@0 {
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG0", "PG1", "PG2",
+ "PG3", "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_8bit_pins: mmc2_8bit {
+ allwinner,pins = "PC5", "PC6", "PC8",
+ "PC9", "PC10", "PC11",
+ "PC12", "PC13", "PC14",
+ "PC15";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PH2", "PH3";
+ allwinner,function = "i2c0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PH4", "PH5";
+ allwinner,function = "i2c1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PE12", "PE13";
+ allwinner,function = "i2c2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ ahb1_rst: reset@01c202c0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202c0 0xc>;
+ };
+
+ apb1_rst: reset@01c202d0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d0 0x4>;
+ };
+
+ apb2_rst: reset@01c202d8 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d8 0x4>;
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
+ };
+
+ wdt0: watchdog@01c20ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 16>;
+ resets = <&apb2_rst 16>;
+ dmas = <&dma 6>, <&dma 6>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 17>;
+ resets = <&apb2_rst 17>;
+ dmas = <&dma 7>, <&dma 7>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 18>;
+ resets = <&apb2_rst 18>;
+ dmas = <&dma 8>, <&dma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 19>;
+ resets = <&apb2_rst 19>;
+ dmas = <&dma 9>, <&dma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 20>;
+ resets = <&apb2_rst 20>;
+ dmas = <&dma 10>, <&dma 10>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb2_gates 0>;
+ resets = <&apb2_rst 0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@01c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb2_gates 1>;
+ resets = <&apb2_rst 1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@01c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb2_gates 2>;
+ resets = <&apb2_rst 2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ rtc: rtc@01f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ prcm@01f01400 {
+ compatible = "allwinner,sun8i-a23-prcm";
+ reg = <0x01f01400 0x200>;
+
+ ar100: ar100_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "ar100";
+ };
+
+ ahb0: ahb0_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&ar100>;
+ clock-output-names = "ahb0";
+ };
+
+ apb0: apb0_clk {
+ compatible = "allwinner,sun8i-a23-apb0-clk";
+ #clock-cells = <0>;
+ clocks = <&ahb0>;
+ clock-output-names = "apb0";
+ };
+
+ apb0_gates: apb0_gates_clk {
+ compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+ #clock-cells = <1>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_pio", "apb0_timer",
+ "apb0_rsb", "apb0_uart",
+ "apb0_i2c";
+ };
+
+ apb0_rst: apb0_rst {
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ cpucfg@01f01c00 {
+ compatible = "allwinner,sun8i-a23-cpuconfig";
+ reg = <0x01f01c00 0x300>;
+ };
+
+ r_uart: serial@01f02800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01f02800 0x400>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb0_gates 4>;
+ resets = <&apb0_rst 4>;
+ status = "disabled";
+ };
+
+ r_pio: pinctrl@01f02c00 {
+ compatible = "allwinner,sun8i-a23-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 0>;
+ resets = <&apb0_rst 0>;
+ gpio-controller;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ r_uart_pins_a: r_uart@0 {
+ allwinner,pins = "PL2", "PL3";
+ allwinner,function = "s_uart";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Allwinner A23 Evaluation Board";
+ compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ serial0 = &r_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@190 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <190000>;
+ };
+
+ button@390 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <390000>;
+ };
+
+ button@600 {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_evb: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+/*
+ * The RX line has a non-populated resistance. In order to use it, you
+ * need to solder R207 on the back of the board in order to close the
+ * line and get a working UART.
+ */
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
};
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
- status = "okay";
- };
-
- pinctrl@01c20800 {
- mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
- button@200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ /* pull-ups and devices require PMIC regulator */
+ status = "failed";
+};
- button@400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- /* pull-ups and devices require PMIC regulator */
- status = "failed";
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
- r_uart: serial@01f02800 {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
- };
+&pio {
+ mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-a23-a33.dtsi"
/ {
- interrupt-parent = <&gic>;
-
- chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer@0 {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "de_be0-lcd0";
- clocks = <&pll6 0>;
- status = "disabled";
- };
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <1>;
- };
- };
-
memory {
reg = <0x40000000 0x40000000>;
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc24M: osc24M_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: osc32k_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "osc32k";
- };
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun8i-a23-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- /* dummy clock until actually implemented */
- pll5: pll5_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- clock-output-names = "pll5";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6", "pll6x2";
- };
-
- cpu: cpu_clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20050 0x4>;
-
- /*
- * PLL1 is listed twice here.
- * While it looks suspicious, it's actually documented
- * that way both in the datasheet and in the code from
- * Allwinner.
- */
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
- clock-output-names = "cpu";
- };
-
- axi: axi_clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun8i-a23-axi-clk";
- reg = <0x01c20050 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb1: ahb1_clk@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun6i-a31-ahb1-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
- clock-output-names = "ahb1";
- };
-
- apb1: apb1_clk@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb1>;
- clock-output-names = "apb1";
- };
-
- ahb1_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb1>;
- clock-output-names = "ahb1_mipidsi", "ahb1_dma",
- "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
- "ahb1_nand", "ahb1_sdram",
- "ahb1_hstimer", "ahb1_spi0",
- "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
- "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
- "ahb1_csi", "ahb1_be", "ahb1_fe",
- "ahb1_gpu", "ahb1_spinlock",
- "ahb1_drc";
- };
-
- apb1_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun8i-a23-apb1-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb1>;
- clock-output-names = "apb1_codec", "apb1_pio",
- "apb1_daudio0", "apb1_daudio1";
- };
-
- apb2: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
- clock-output-names = "apb2";
- };
-
- apb2_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun8i-a23-apb2-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb2>;
- clock-output-names = "apb2_i2c0", "apb2_i2c1",
- "apb2_i2c2", "apb2_uart0",
- "apb2_uart1", "apb2_uart2",
- "apb2_uart3", "apb2_uart4";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 0>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
clock-output-names = "mbus";
};
};
+};
- soc@01c00000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- dma: dma-controller@01c02000 {
- compatible = "allwinner,sun8i-a23-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb1_gates 6>;
- resets = <&ahb1_rst 6>;
- #dma-cells = <1>;
- };
-
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ahb1_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ahb1_rst 8>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ahb1_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ahb1_rst 9>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun5i-a13-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ahb1_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ahb1_rst 10>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun8i-a23-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 5>;
- gpio-controller;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PF2", "PF4";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc1_pins_a: mmc1@0 {
- allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
- allwinner,function = "mmc1";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PH2", "PH3";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PH4", "PH5";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PE12", "PE13";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
-
- ahb1_rst: reset@01c202c0 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x01c202c0 0xc>;
- };
-
- apb1_rst: reset@01c202d0 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x01c202d0 0x4>;
- };
-
- apb2_rst: reset@01c202d8 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x01c202d8 0x4>;
- };
-
- timer@01c20c00 {
- compatible = "allwinner,sun4i-a10-timer";
- reg = <0x01c20c00 0xa0>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc24M>;
- };
-
- wdt0: watchdog@01c20ca0 {
- compatible = "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x100>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- uart0: serial@01c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb2_gates 16>;
- resets = <&apb2_rst 16>;
- dmas = <&dma 6>, <&dma 6>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart1: serial@01c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb2_gates 17>;
- resets = <&apb2_rst 17>;
- dmas = <&dma 7>, <&dma 7>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart2: serial@01c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb2_gates 18>;
- resets = <&apb2_rst 18>;
- dmas = <&dma 8>, <&dma 8>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart3: serial@01c28c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28c00 0x400>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb2_gates 19>;
- resets = <&apb2_rst 19>;
- dmas = <&dma 9>, <&dma 9>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- uart4: serial@01c29000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c29000 0x400>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb2_gates 20>;
- resets = <&apb2_rst 20>;
- dmas = <&dma 10>, <&dma 10>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
- i2c0: i2c@01c2ac00 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb2_gates 0>;
- resets = <&apb2_rst 0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb2_gates 1>;
- resets = <&apb2_rst 1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b400 0x400>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb2_gates 2>;
- resets = <&apb2_rst 2>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- gic: interrupt-controller@01c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
- reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
- <0x01c84000 0x2000>,
- <0x01c86000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- rtc: rtc@01f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- prcm@01f01400 {
- compatible = "allwinner,sun8i-a23-prcm";
- reg = <0x01f01400 0x200>;
-
- ar100: ar100_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "ar100";
- };
-
- ahb0: ahb0_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&ar100>;
- clock-output-names = "ahb0";
- };
-
- apb0: apb0_clk {
- compatible = "allwinner,sun8i-a23-apb0-clk";
- #clock-cells = <0>;
- clocks = <&ahb0>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: apb0_gates_clk {
- compatible = "allwinner,sun8i-a23-apb0-gates-clk";
- #clock-cells = <1>;
- clocks = <&apb0>;
- clock-output-names = "apb0_pio", "apb0_timer",
- "apb0_rsb", "apb0_uart",
- "apb0_i2c";
- };
-
- apb0_rst: apb0_rst {
- compatible = "allwinner,sun6i-a31-clock-reset";
- #reset-cells = <1>;
- };
- };
-
- r_uart: serial@01f02800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01f02800 0x400>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&apb0_gates 4>;
- resets = <&apb0_rst 4>;
- status = "disabled";
- };
-
- r_pio: pinctrl@01f02c00 {
- compatible = "allwinner,sun8i-a23-r-pinctrl";
- reg = <0x01f02c00 0x400>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>;
- resets = <&apb0_rst 0>;
- gpio-controller;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
- r_uart_pins_a: r_uart@0 {
- allwinner,pins = "PL2", "PL3";
- allwinner,function = "s_uart";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
- };
+&pio {
+ compatible = "allwinner,sun8i-a23-pinctrl";
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
};
--- /dev/null
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "ET Q8 Quad Core Tablet (v1.6)";
+ compatible = "et,q8-v1.6", "allwinner,sun8i-a33";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Allwinner GA10H Quad Core Tablet (v1.1)";
+ compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+ aliases {
+ serial0 = &r_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+
+ button@600 {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Sinlinx SinA33";
+ compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191011>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <391304>;
+ };
+
+ button@600 {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&mmc2_8bit_pins {
+ /* eMMC is missing pull-ups */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+ mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_b>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+
+/ {
+ cpus {
+ cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ clocks {
+ /* Dummy clock for pll11 (DDR1) until actually implemented */
+ pll11: pll11_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "pll11";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-mbus-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
+ clock-output-names = "mbus";
+ };
+ };
+};
+
+&pio {
+ compatible = "allwinner,sun8i-a33-pinctrl";
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart0_pins_b: uart0@1 {
+ allwinner,pins = "PB0", "PB1";
+ allwinner,function = "uart0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+};
--- /dev/null
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Cubietech Cubieboard4";
+ compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+};
+
+&pio {
+ mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+ allwinner,pins = "PH18";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
};
chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
leds {
gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
};
};
+
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_pin_optimus>;
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
};
&i2c3 {
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+&ohci0 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
&pio {
led_pins_optimus: led-pins@0 {
allwinner,pins = "PH0", "PH1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+ usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
&mmc0 {
status = "okay";
};
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_optimus>;
+ gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
/* Enable internal pull-up */
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
+
+&usbphy1 {
+ phy-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usbphy2 {
+ status = "okay";
+};
+
+&usbphy3 {
+ phy-supply = <®_usb3_vbus>;
+ status = "okay";
+};
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
reg = <0 0x20000000 0x02 0>;
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
clock-output-names = "osc32k";
};
+ usb_mod_clk: clk@00a08000 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-mod-clk";
+ reg = <0x00a08000 0x4>;
+ clocks = <&ahb1_gates 1>;
+ clock-output-names = "usb0_ahb", "usb_ohci0",
+ "usb1_ahb", "usb_ohci1",
+ "usb2_ahb", "usb_ohci2";
+ };
+
+ usb_phy_clk: clk@00a08004 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-phy-clk";
+ reg = <0x00a08004 0x4>;
+ clocks = <&ahb1_gates 1>;
+ clock-output-names = "usb_phy0", "usb_hsic1_480M",
+ "usb_phy1", "usb_hsic2_480M",
+ "usb_phy2", "usb_hsic_12M";
+ };
+
pll4: clk@0600000c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-pll4-clk";
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
- "ahb0_spi0","ahb0_spi1", "ahb0_spi2",
+ "ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
"ahb0_spi3";
};
*/
ranges = <0 0 0 0x20000000>;
+ ehci0: usb@00a00000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a00000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 1>;
+ resets = <&usb_mod_clk 17>;
+ phys = <&usbphy1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@00a00400 {
+ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+ reg = <0x00a00400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
+ resets = <&usb_mod_clk 17>;
+ phys = <&usbphy1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy1: phy@00a00800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a00800 0x4>;
+ clocks = <&usb_phy_clk 1>;
+ clock-names = "phy";
+ resets = <&usb_phy_clk 17>;
+ reset-names = "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ ehci1: usb@00a01000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a01000 0x100>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 3>;
+ resets = <&usb_mod_clk 18>;
+ phys = <&usbphy2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy2: phy@00a01800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a01800 0x4>;
+ clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+ <&usb_phy_clk 3>;
+ clock-names = "hsic_480M", "hsic_12M", "phy";
+ resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+ reset-names = "hsic", "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ /* usb1 is always used with HSIC */
+ phy_type = "hsic";
+ };
+
+ ehci2: usb@00a02000 {
+ compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+ reg = <0x00a02000 0x100>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 5>;
+ resets = <&usb_mod_clk 19>;
+ phys = <&usbphy3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@00a02400 {
+ compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+ reg = <0x00a02400 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
+ resets = <&usb_mod_clk 19>;
+ phys = <&usbphy3>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy3: phy@00a02800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a02800 0x4>;
+ clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+ <&usb_phy_clk 5>;
+ clock-names = "hsic_480M", "hsic_12M", "phy";
+ resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+ reset-names = "hsic", "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc_config_clk: clk@01c13000 {
clocks = <&osc24M>;
};
+ wdt: watchdog@06000ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x06000ca0 0x20>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pio: pinctrl@06000800 {
compatible = "allwinner,sun9i-a80-pinctrl";
reg = <0x06000800 0x400>;
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
target-12v-supply = <&vdd_12v0_sata>;
};
+ hda@0,70030000 {
+ status = "okay";
+ };
+
padctl@0,7009f000 {
pinctrl-0 = <&padctl_default>;
pinctrl-names = "default";
sdhci@0,700b0600 {
status = "okay";
bus-width = <8>;
+ non-removable;
};
ahub@0,70300000 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "+VDD_LED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_mux>;
apbmisc@0,70000800 {
compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */
- <0x0 0x7000E864 0x0 0x04>; /* Strapping options */
+ <0x0 0x7000e864 0x0 0x04>; /* Strapping options */
};
pinmux: pinmux@0,70000868 {
clocks = <&tegra_car TEGRA124_CLK_HDA>,
<&tegra_car TEGRA124_CLK_HDA2HDMI>,
<&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
- clock-names = "hda", "hda2hdmi", "hdacodec_2x";
+ clock-names = "hda", "hda2hdmi", "hda2codec_2x";
resets = <&tegra_car 125>, /* hda */
<&tegra_car 128>, /* hda2hdmi */
<&tegra_car 111>; /* hda2codec_2x */
- reset-names = "hda", "hda2hdmi", "hdacodec_2x";
+ reset-names = "hda", "hda2hdmi", "hda2codec_2x";
status = "disabled";
};
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
+ hdmi-supply = <&vdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ vdd_hdmi: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "VDDIO_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_reg>;
+ };
};
sound {
fuse@7000f800 {
compatible = "nvidia,tegra20-efuse";
- reg = <0x7000F800 0x400>;
+ reg = <0x7000f800 0x400>;
clocks = <&tegra_car TEGRA20_CLK_FUSE>;
clock-names = "fuse";
resets = <&tegra_car 39>;
+#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/**
* tegra30-cardhu-a04.dts.
* The identification of board is done in two ways, by looking the sticker
* on PCB and by reading board id eeprom.
- * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
* number is the fab version like here it is 002 and hence fab version A02.
* The (downstream internal) U-Boot of Cardhu display the board-id as
* follows:
<&tegra_car TEGRA30_CLK_EXTERN1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ interrupt-parent = <&pmic>;
+ interrupts = <2 0>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <100>;
+ gpio-key,wakeup;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <10>;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <10>;
+ };
+ };
};
reset-names = "fuse";
};
+ hda@70030000 {
+ compatible = "nvidia,tegra30-hda";
+ reg = <0x70030000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA30_CLK_HDA>,
+ <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+ <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
+ clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+ resets = <&tegra_car 125>, /* hda */
+ <&tegra_car 128>, /* hda2hdmi */
+ <&tegra_car 111>; /* hda2codec_2x */
+ reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+ status = "disabled";
+ };
+
ahub@70080000 {
compatible = "nvidia,tegra30-ahub";
reg = <0x70080000 0x200
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-LD4 Reference Board";
+ compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 49 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-LD4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-ld4";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-Pro4 Reference Board";
+ compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 50 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-pro4";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-sLD3 Reference Board";
+ compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000
+ 0xc0000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 49 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-sld3";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,uniphier-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ timer@20000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20000200 0x20>;
+ interrupts = <1 11 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@20000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20000600 0x20>;
+ interrupts = <1 13 0x304>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@20001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x20001000 0x1000>,
+ <0x20000100 0x100>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+ model = "UniPhier PH1-sLD8 Reference Board";
+ compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &serialsc;
+ };
+
+ aliases {
+ serial0 = &serialsc;
+ };
+};
+
+&extbus {
+ ranges = <0 0x00000000 0x0f000000 0x01000000
+ 1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+ ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+ interrupts = <0 48 4>;
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "socionext,ph1-sld8";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ arm_timer_clk: arm_timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ system-bus-controller-misc@59800000 {
+ compatible = "socionext,uniphier-system-bus-controller-misc",
+ "syscon";
+ reg = <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for UniPhier Support Card (Expansion Board)
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&extbus {
+ support_card: support_card {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ethsc: ethernet@00000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x00000000 0x1000>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ };
+
+ serialsc: uart@000b0000 {
+ compatible = "ns16550a";
+ reg = <0x000b0000 0x20>;
+ clock-frequency = <12288000>;
+ reg-shift = <1>;
+ };
+ };
+};
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
#define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1
#define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0
#define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0
-#define VF610_PAD_PTC12__ENET_RMII_RXD1 0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ENET_RMII1_RXD1 0x0E4 0x000 ALT1 0x0
#define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1
#define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1
#define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
--- /dev/null
+/*
+ * Device tree for Colibri VF61 Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+ model = "VF610 Cortex-M4";
+ compatible = "fsl,vf610m4";
+
+ chosen {
+ bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
+ linux,stdout-path = "&uart2";
+ };
+
+ memory {
+ reg = <0x8c000000 0x3000000>;
+ };
+};
+
+&gpio0 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&gpio2 {
+ status = "disabled";
+};
+
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device tree for VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include "vfxxx.dtsi"
+
+&mscm_ir {
+ interrupt-parent = <&nvic>;
+};
--- /dev/null
+
+/dts-v1/;
+
+#include "zx296702.dtsi"
+
+/ {
+ model = "ZTE ZX296702 AD1 Board";
+ compatible = "zte,zx296702-ad1", "zte,zx296702";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ memory {
+ reg = <0x50000000 0x20000000>;
+ };
+};
+
+&mmc0 {
+ num-slots = <1>;
+ supports-highspeed;
+ non-removable;
+ disable-wp;
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&mmc1 {
+ num-slots = <1>;
+ supports-highspeed;
+ non-removable;
+ disable-wp;
+ status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/zx296702-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "zte,zx296702-smp";
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ next-level-cache = <&l2cc>;
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ next-level-cache = <&l2cc>;
+ reg = <1>;
+ };
+ };
+
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ matrix: bus-matrix@400000 {
+ compatible = "zte,zx-bus-matrix";
+ reg = <0x00400000 0x1000>;
+ };
+
+ intc: interrupt-controller@00801000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00801000 0x1000>,
+ <0x00800100 0x100>;
+ };
+
+ global_timer: timer@008000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x00800200 0x20>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ clocks = <&topclk ZX296702_A9_PERIPHCLK>;
+ };
+
+ l2cc: l2-cache-controller@0x00c00000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00c00000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <1 1 1>;
+ arm,double-linefill = <1>;
+ arm,double-linefill-incr = <0>;
+ };
+
+ pcu: pcu@0xa0008000 {
+ compatible = "zte,zx296702-pcu";
+ reg = <0xa0008000 0x1000>;
+ };
+
+ topclk: topclk@0x09800000 {
+ compatible = "zte,zx296702-topcrm-clk";
+ reg = <0x09800000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ lsp1clk: lsp1clk@0x09400000 {
+ compatible = "zte,zx296702-lsp1crpm-clk";
+ reg = <0x09400000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ lsp0clk: lsp0clk@0x0b000000 {
+ compatible = "zte,zx296702-lsp0crpm-clk";
+ reg = <0x0b000000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@0x09405000 {
+ compatible = "zte,zx296702-uart";
+ reg = <0x09405000 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lsp1clk ZX296702_UART0_WCLK>;
+ status = "disabled";
+ };
+
+ uart1: serial@0x09406000 {
+ compatible = "zte,zx296702-uart";
+ reg = <0x09406000 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lsp1clk ZX296702_UART1_WCLK>;
+ status = "disabled";
+ };
+
+ mmc0: mmc@0x09408000 {
+ compatible = "snps,dw-mshc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x09408000 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <32>;
+ clocks = <&lsp1clk ZX296702_SDMMC0_PCLK>,
+ <&lsp1clk ZX296702_SDMMC0_WCLK>;
+ clock-names = "biu", "ciu";
+ status = "disabled";
+ };
+
+ mmc1: mmc@0x0b003000 {
+ compatible = "snps,dw-mshc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0b003000 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <32>;
+ clocks = <&lsp0clk ZX296702_SDMMC1_PCLK>,
+ <&lsp0clk ZX296702_SDMMC1_WCLK>;
+ clock-names = "biu", "ciu";
+ status = "disabled";
+ };
+
+ sysctrl: sysctrl@0xa0007000 {
+ compatible = "zte,sysctrl", "syscon";
+ reg = <0xa0007000 0x1000>;
+ };
+ };
+};
};
gem0: ethernet@e000b000 {
- compatible = "cdns,zynq-gem";
+ compatible = "cdns,zynq-gem", "cdns,gem";
reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
};
gem1: ethernet@e000c000 {
- compatible = "cdns,zynq-gem";
+ compatible = "cdns,zynq-gem", "cdns,gem";
reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;
model = "Adapteva Parallella Board";
compatible = "adapteva,parallella", "xlnx,zynq-7000";
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
memory {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
- linux,stdout-path = "/amba/serial@e0001000";
+ bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+ stdout-path = "serial0:115200n8";
};
};
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
leds {
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
model = "Zynq ZYBO Development Board";
compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+ aliases {
+ ethernet0 = &gem0;
+ serial0 = &uart1;
+ };
+
memory {
device_type = "memory";
reg = <0x0 0x20000000>;
};
chosen {
- bootargs = "console=ttyPS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
};
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SSB=m
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_MMU is not set
+CONFIG_ARM_SINGLE_ARMV7M=y
CONFIG_ARCH_EFM32=y
CONFIG_SET_MEM_PARAM=y
CONFIG_DRAM_BASE=0x88000000
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SPI=y
-# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
+CONFIG_CPU_FREQ=y
CONFIG_CPU_IDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
-CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-CONFIG_WIRELESS=y
CONFIG_CFG80211=y
-CONFIG_MWIFIEX=y
-CONFIG_MWIFIEX_SDIO=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_PROC_DEVICETREE=y
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_BLK_DEV_LOOP=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_GADGET=y
+CONFIG_MWIFIEX=y
+CONFIG_MWIFIEX_SDIO=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_HW_RANDOM=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
-CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
-CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
CONFIG_SPI_S3C64XX=y
-CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_MAX77693=y
CONFIG_CHARGER_TPS65090=y
-CONFIG_HWMON=y
CONFIG_SENSORS_LM90=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_THERMAL=y
+CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_INA2XX=y
CONFIG_THERMAL=y
-CONFIG_EXYNOS_THERMAL=y
+CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
+CONFIG_EXYNOS_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MFD_CROS_EC=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77686=y
-CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MAX77693=y
+CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_DRM=y
-CONFIG_DRM_EXYNOS_HDMI=y
-CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PTN3460=y
CONFIG_DRM_PS8622=y
CONFIG_DRM_EXYNOS=y
CONFIG_DRM_EXYNOS_FIMD=y
-CONFIG_DRM_EXYNOS_DP=y
-CONFIG_DRM_PANEL=y
+CONFIG_DRM_EXYNOS_DSI=y
+CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_DRM_PANEL_S6E8AA0=y
CONFIG_FB_SIMPLE=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_7x14=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_SDHCI=y
CONFIG_PWM=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PHY_EXYNOS5250_SATA=y
-CONFIG_PHY_SAMSUNG_USB2=y
-CONFIG_PHY_EXYNOS4210_USB2=y
-CONFIG_PHY_EXYNOS4X12_USB2=y
-CONFIG_PHY_EXYNOS5250_USB2=y
-CONFIG_PHY_EXYNOS5_USBDRD=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
+CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRC_CCITT=y
+CONFIG_FONTS=y
+CONFIG_FONT_7x14=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_HIX5HD2_GMAC=y
+CONFIG_HIP04_ETH=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_GPIO_DWAPB=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_DRM=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
CONFIG_SOC_IMX6SX=y
+CONFIG_SOC_IMX7D=y
CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
CONFIG_PCI=y
CONFIG_PCI_IMX6=y
CONFIG_SMP=y
CONFIG_CAN_FLEXCAN=y
CONFIG_BT=y
CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_USB_USBNET=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_BRCMFMAC=m
+CONFIG_WL_TI=y
+CONFIG_WL12XX=m
+CONFIG_WLCORE_SDIO=m
+# CONFIG_WILINK_PLATFORM_DATA is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_STMPE=y
+CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
CONFIG_SERIO_SERPORT=m
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MXC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
+CONFIG_TI_KEYSTONE_NETCP=y
+CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
+CONFIG_PHYLIB=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
+CONFIG_SOC_TI=y
+CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
+CONFIG_KEYSTONE_NAVIGATOR_DMA=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
CONFIG_EXT4_FS=y
--- /dev/null
+CONFIG_CROSS_COMPILE="arm-linux-gnueabihf-"
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARM_SINGLE_ARMV7M=y
+CONFIG_ARCH_LPC18XX=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x28000000
+CONFIG_DRAM_SIZE=0x02000000
+CONFIG_FLASH_MEM_BASE=0x1b000000
+CONFIG_FLASH_SIZE=0x00080000
+CONFIG_PREEMPT=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_74XX_MMIO=y
+CONFIG_SENSORS_LM75=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_PCA9532=y
+CONFIG_LEDS_PCA9532_GPIO=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_RCU_CPU_STALL_INFO is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
CONFIG_MACH_ARMADA_39X=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5D4=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_CYGNUS=y
CONFIG_ARCH_BCM_21664=y
CONFIG_MACH_BERLIN_BG2=y
CONFIG_MACH_BERLIN_BG2CD=y
CONFIG_MACH_BERLIN_BG2Q=y
+CONFIG_ARCH_DIGICOLOR=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_R7S72100=y
CONFIG_ARCH_R8A73A4=y
CONFIG_ARCH_R8A7740=y
+CONFIG_ARCH_R8A7778=y
CONFIG_ARCH_R8A7779=y
CONFIG_ARCH_R8A7790=y
CONFIG_ARCH_R8A7791=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
+CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
CONFIG_ARM_ZYNQ_CPUIDLE=y
+CONFIG_ARM_EXYNOS_CPUIDLE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_DEV=y
+CONFIG_CAN_AT91=m
CONFIG_CAN_XILINXCAN=y
CONFIG_CAN_MCP251X=y
CONFIG_BT=m
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
+CONFIG_ATMEL_TCLIB=y
CONFIG_ICS932S401=y
+CONFIG_ATMEL_SSC=m
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_EEPROM_AT24=y
CONFIG_MWIFIEX_SDIO=m
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_TTYAT=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
+CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_MUX=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_AT91=m
CONFIG_I2C_CADENCE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_DIGICOLOR=m
CONFIG_I2C_GPIO=m
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_RCAR=y
+CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_SPI=y
+CONFIG_SPI_ATMEL=m
CONFIG_SPI_CADENCE=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_RSPI=y
+CONFIG_SPI_S3C64XX=m
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIRF=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_BATTERY_SBS=y
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_MAX14577=m
+CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_TPS65090=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_CPU_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
-CONFIG_DAVINCI_WATCHDOG
+CONFIG_DAVINCI_WATCHDOG=m
+CONFIG_EXYNOS_THERMAL=m
CONFIG_ST_THERMAL_SYSCFG=y
CONFIG_ST_THERMAL_MEMMAP=y
CONFIG_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
+CONFIG_ST_LPC_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
+CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
+CONFIG_REGULATOR_MAX14577=m
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=y
-CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_RENESAS_VSP1=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ML86V7667=m
CONFIG_DRM=y
+CONFIG_DRM_PTN3460=m
+CONFIG_DRM_PS8622=m
+CONFIG_DRM_EXYNOS=m
+CONFIG_DRM_EXYNOS_DSI=y
+CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_TEGRA=y
+CONFIG_DRM_PANEL_S6E8AA0=m
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
CONFIG_FB_SH_MOBILE_MERAM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_SOUND=y
-CONFIG_SND=y
+CONFIG_SOUND=m
+CONFIG_SND=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_SOC=y
+CONFIG_SND_SOC=m
+CONFIG_SND_ATMEL_SOC=m
+CONFIG_SND_ATMEL_SOC_WM8904=m
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
-CONFIG_SND_SOC_TEGRA=y
-CONFIG_SND_SOC_TEGRA_RT5640=y
-CONFIG_SND_SOC_TEGRA_WM8753=y
-CONFIG_SND_SOC_TEGRA_WM8903=y
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
-CONFIG_SND_SOC_TEGRA_ALC5632=y
-CONFIG_SND_SOC_TEGRA_MAX98090=y
+CONFIG_SND_SOC_TEGRA=m
+CONFIG_SND_SOC_TEGRA_RT5640=m
+CONFIG_SND_SOC_TEGRA_WM8753=m
+CONFIG_SND_SOC_TEGRA_WM8903=m
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
+CONFIG_SND_SOC_TEGRA_ALC5632=m
+CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_WM8978=m
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_EXYNOS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_RCAR_PHY=m
-CONFIG_USB_RCAR_GEN2_PHY=m
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
+CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_MAX77802=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_PALMAS=y
+CONFIG_RTC_DRV_ST_LPC=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_EM3027=y
+CONFIG_RTC_DRV_DIGICOLOR=m
+CONFIG_RTC_DRV_S5M=m
+CONFIG_RTC_DRV_S3C=m
CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_AT91RM9200=m
+CONFIG_RTC_DRV_AT91SAM9=m
CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
+CONFIG_AT_HDMAC=y
+CONFIG_AT_XDMAC=y
CONFIG_MV_XOR=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_SH_DMAE=y
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
+CONFIG_QCOM_PM=y
CONFIG_COMMON_CLK_QCOM=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC_CHARDEV=m
CONFIG_COMMON_CLK_MAX77686=y
+CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
CONFIG_IIO=y
+CONFIG_AT91_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
CONFIG_PWM=y
+CONFIG_PWM_ATMEL=m
+CONFIG_PWM_ATMEL_TCB=m
CONFIG_PWM_RENESAS_TPU=y
+CONFIG_PWM_SAMSUNG=m
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_MIPHY365X=y
+CONFIG_PHY_RCAR_GEN2=m
CONFIG_PHY_STIH41X_USB=y
CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN9I_USB=y
+CONFIG_PHY_SAMSUNG_USB2=m
CONFIG_EXT4_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_CRYPTO_DEV_TEGRA_AES=y
CONFIG_CPUFREQ_DT=y
CONFIG_KEYSTONE_IRQ=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM=m
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA1_ARM_CE=m
+CONFIG_CRYPTO_SHA2_ARM_CE=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_AES_ARM_CE=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=m
+CONFIG_CRYPTO_DEV_ATMEL_TDES=m
+CONFIG_CRYPTO_DEV_ATMEL_SHA=m
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
+CONFIG_DM9000=y
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_INPUT_MISC=y
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
+CONFIG_PHY_DM816X_USB=m
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_MSM_MMCC_8974=y
CONFIG_MSM_IOMMU=y
CONFIG_QCOM_GSBI=y
+CONFIG_QCOM_PM=y
CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_EXT2_FS=y
# CONFIG_HWMON is not set
CONFIG_SSB=m
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_DA9063_WATCHDOG=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_DA9063=y
-CONFIG_REGULATOR=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_RENESAS_USBHS=y
CONFIG_USB_RCAR_PHY=y
-CONFIG_USB_RCAR_GEN2_PHY=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=y
CONFIG_USB_ETH=y
CONFIG_AK8975=y
CONFIG_PWM=y
CONFIG_PWM_RENESAS_TPU=y
+CONFIG_GENERIC_PHY=y
+CONFIG_PHY_RCAR_GEN2=y
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
--- /dev/null
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARM_SINGLE_ARMV7M=y
+CONFIG_ARCH_STM32=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x90000000
+CONFIG_FLASH_MEM_BASE=0x08000000
+CONFIG_FLASH_SIZE=0x00200000
+CONFIG_PREEMPT=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_XIP_KERNEL=y
+CONFIG_XIP_PHYS_ADDR=0x08008000
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM95245=y
+CONFIG_WATCHDOG=y
+CONFIG_TEGRA_WATCHDOG=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_HDA=y
+CONFIG_SND_HDA_TEGRA=y
+CONFIG_SND_HDA_INPUT_BEEP=y
+CONFIG_SND_HDA_INPUT_JACK=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_EVENTS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
+CONFIG_CORESIGHT=y
+CONFIG_CORESIGHT_SINK_TPIU=y
+CONFIG_CORESIGHT_SINK_ETBV10=y
+CONFIG_CORESIGHT_SOURCE_ETM3X=y
CONFIG_CRYPTO_DEV_UX500=y
CONFIG_CRYPTO_DEV_UX500_CRYP=y
CONFIG_CRYPTO_DEV_UX500_HASH=y
--- /dev/null
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_MMU is not set
+CONFIG_ARM_SINGLE_ARMV7M=y
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_VF610=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x8c000000
+CONFIG_FLASH_MEM_BASE=0x8f000000
+CONFIG_FLASH_SIZE=0x01000000
+CONFIG_CMDLINE="console=/dev/ttyLP2"
+CONFIG_XIP_KERNEL=y
+CONFIG_XIP_PHYS_ADDR=0x0f000080
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_UEVENT_HELPER is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_MFD_SYSCON=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_FTRACE is not set
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_ZX=y
+CONFIG_SOC_ZX296702=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_KSM=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HIBERNATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait"
+#CONFIG_NET is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_UID_STAT=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_UEVENT=y
+CONFIG_DM_VERITY=y
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SPI=y
+CONFIG_LOGO=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_DEBUG=y
+CONFIG_FUSE_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+#CONFIG_NFS_FS is not set
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_WARN=4096
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_PANIC_TIMEOUT=5
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_ZTE_ZX=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_GPIOLIB=y
* Sets boot address of specified physical CPU
*/
int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr);
+ /*
+ * Gets boot address of specified physical CPU
+ */
+ int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr);
/*
* Boots specified physical CPU
*/
};
extern void cpu_resume(void);
+extern void cpu_resume_arm(void);
extern int cpu_suspend(unsigned long, int (*)(unsigned long));
#endif
* First, the standard VFP set.
*/
+#ifndef __ASM_VFP_H
+#define __ASM_VFP_H
+
#define FPSID cr0
#define FPSCR cr1
#define MVFR1 cr6
#define VFPOPDESC_UNUSED_BIT (24)
#define VFPOPDESC_UNUSED_MASK (0xFF << VFPOPDESC_UNUSED_BIT)
#define VFPOPDESC_OPDESC_MASK (~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK))
+
+#ifndef __ASSEMBLY__
+void vfp_disable(void);
+#endif
+
+#endif /* __ASM_VFP_H */
#ifdef CONFIG_DEBUG_UART_8250_WORD
.macro store, rd, rx:vararg
+ ARM_BE8(rev \rd, \rd)
str \rd, \rx
+ ARM_BE8(rev \rd, \rd)
.endm
.macro load, rd, rx:vararg
ldr \rd, \rx
+ ARM_BE8(rev \rd, \rd)
.endm
#else
.macro store, rd, rx:vararg
#define UARTn_TXDATA 0x0034
- .macro addruart, rx, tmp
+ .macro addruart, rx, tmp, tmp2
ldr \rx, =(CONFIG_DEBUG_UART_PHYS)
/*
/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n)
+#define IMX7D_UART1_BASE_ADDR 0x30860000
+#define IMX7D_UART2_BASE_ADDR 0x30890000
+#define IMX7D_UART3_BASE_ADDR 0x30880000
+#define IMX7D_UART4_BASE_ADDR 0x30a60000
+#define IMX7D_UART5_BASE_ADDR 0x30a70000
+#define IMX7D_UART6_BASE_ADDR 0x30a80000
+#define IMX7D_UART7_BASE_ADDR 0x30a90000
+#define IMX7D_UART_BASE_ADDR(n) IMX7D_UART##n##_BASE_ADDR
+#define IMX7D_UART_BASE(n) IMX7D_UART_BASE_ADDR(n)
+
#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL)
#elif defined(CONFIG_DEBUG_IMX6SX_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX)
+#elif defined(CONFIG_DEBUG_IMX7D_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX7D)
+
#endif
#endif /* __DEBUG_IMX_UART_H */
*/
#include <linux/amba/serial.h>
+#ifdef CONFIG_DEBUG_ZTE_ZX
+#undef UART01x_DR
+#undef UART01x_FR
+#define UART01x_DR 0x04
+#define UART01x_FR 0x14
+#endif
+
#ifdef CONFIG_DEBUG_UART_PHYS
.macro addruart, rp, rv, tmp
ldr \rp, =CONFIG_DEBUG_UART_PHYS
#else /* !CONFIG_MMU */
.macro addruart_current, rx, tmp1, tmp2
- addruart \rx, \tmp1
+ addruart \rx, \tmp1, \tmp2
.endm
#endif /* CONFIG_MMU */
.text
.align
+
+#ifdef CONFIG_MMU
+ .arm
+ENTRY(cpu_resume_arm)
+ THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM.
+ THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
+ THUMB( .thumb ) @ switch to Thumb now.
+ THUMB(1: )
+#endif
+
ENTRY(cpu_resume)
ARM_BE8(setend be) @ ensure we are in BE mode
#ifdef CONFIG_ARM_VIRT_EXT
THUMB( bx r3 )
ENDPROC(cpu_resume)
+#ifdef CONFIG_MMU
+ENDPROC(cpu_resume_arm)
+#endif
+
.align 2
_sleep_save_sp:
.long sleep_save_sp - .
#
# Makefile for the linux kernel.
#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
obj-y := soc.o
-obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
-
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
+++ /dev/null
-# Note: the following conditions must always be true:
-# ZRELADDR == virt_to_phys(TEXTADDR)
-# PARAMS_PHYS must be within 4MB of ZRELADDR
-# INITRD_PHYS must be in RAM
-
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
-initrd_phys-y := 0x20410000
+++ /dev/null
-/*
- * Header file for the Atmel RAM Controller
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
- */
-
-#ifndef __AT91_RAMC_H__
-#define __AT91_RAMC_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_ramc_base[];
-
-#define at91_ramc_read(id, field) \
- __raw_readl(at91_ramc_base[id] + field)
-
-#define at91_ramc_write(id, field, value) \
- __raw_writel(value, at91_ramc_base[id] + field)
-#else
-.extern at91_ramc_base
-#endif
-
-#include <soc/at91/at91rm9200_sdramc.h>
-#include <soc/at91/at91sam9_ddrsdr.h>
-#include <soc/at91/at91sam9_sdramc.h>
-
-#endif /* __AT91_RAMC_H__ */
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR 0x00 /* MC Remap Control Register */
-#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
-
-#define AT91_MC_ASR 0x04 /* MC Abort Status Register */
-#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
-#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
-#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
-#define AT91_MC_ABTSZ_BYTE (0 << 8)
-#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
-#define AT91_MC_ABTSZ_WORD (2 << 8)
-#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
-#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
-#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
-#define AT91_MC_ABTTYP_FETCH (2 << 10)
-#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
-#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
-#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
-#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
-#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
-#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
-#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
-#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR 0x08 /* MC Abort Address Status Register */
-
-#define AT91_MC_MPR 0x0c /* MC Master Priority Register */
-#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
-#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
-#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
-#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA 0x60 /* Chip Select Assignment Register */
-#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
-#define AT91_EBI_CS0A_SMC (0 << 0)
-#define AT91_EBI_CS0A_BFC (1 << 0)
-#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_EBI_CS1A_SMC (0 << 1)
-#define AT91_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
-#define AT91_EBI_CS3A_SMC (0 << 3)
-#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
-#define AT91_EBI_CS4A_SMC (0 << 4)
-#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
-#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
-#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_CSR(n) (0x70 + ((n) * 4)) /* SMC Chip Select Register */
-#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
-#define AT91_SMC_NWS_(x) ((x) << 0)
-#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
-#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
-#define AT91_SMC_TDF_(x) ((x) << 8)
-#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
-#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
-#define AT91_SMC_DBW_16 (1 << 13)
-#define AT91_SMC_DBW_8 (2 << 13)
-#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
-#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
-#define AT91_SMC_ACSS_STD (0 << 16)
-#define AT91_SMC_ACSS_1 (1 << 16)
-#define AT91_SMC_ACSS_2 (2 << 16)
-#define AT91_SMC_ACSS_3 (3 << 16)
-#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
-#define AT91_SMC_RWSETUP_(x) ((x) << 24)
-#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
-#define AT91_SMC_RWHOLD_(x) ((x) << 28)
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR 0xc0 /* Mode Register */
-#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
-#define AT91_BFC_BFCOM_DISABLED (0 << 0)
-#define AT91_BFC_BFCOM_ASYNC (1 << 0)
-#define AT91_BFC_BFCOM_BURST (2 << 0)
-#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
-#define AT91_BFC_BFCC_MCK (1 << 2)
-#define AT91_BFC_BFCC_DIV2 (2 << 2)
-#define AT91_BFC_BFCC_DIV4 (3 << 2)
-#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
-#define AT91_BFC_PAGES (7 << 8) /* Page Size */
-#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
-#define AT91_BFC_PAGES_16 (1 << 8)
-#define AT91_BFC_PAGES_32 (2 << 8)
-#define AT91_BFC_PAGES_64 (3 << 8)
-#define AT91_BFC_PAGES_128 (4 << 8)
-#define AT91_BFC_PAGES_256 (5 << 8)
-#define AT91_BFC_PAGES_512 (6 << 8)
-#define AT91_BFC_PAGES_1024 (7 << 8)
-#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
-#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
-#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
-#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
-#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_smc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#ifndef __ASSEMBLY__
-struct sam9_smc_config {
- /* Setup register */
- u8 ncs_read_setup;
- u8 nrd_setup;
- u8 ncs_write_setup;
- u8 nwe_setup;
-
- /* Pulse register */
- u8 ncs_read_pulse;
- u8 nrd_pulse;
- u8 ncs_write_pulse;
- u8 nwe_pulse;
-
- /* Cycle register */
- u16 read_cycle;
- u16 write_cycle;
-
- /* Mode register */
- u32 mode;
- u8 tdf_cycles:4;
-};
-
-extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
-#endif
-
-#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
-#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-
-#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */
-#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */
-#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-
-#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */
-#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-#define AT91_SMC_EXNWMODE_READY (3 << 4)
-#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-#define AT91_SMC_BAT_SELECT (0 << 8)
-#define AT91_SMC_BAT_WRITE (1 << 8)
-#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-#define AT91_SMC_DBW_8 (0 << 12)
-#define AT91_SMC_DBW_16 (1 << 12)
-#define AT91_SMC_DBW_32 (2 << 12)
-#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-#define AT91_SMC_TDF_(x) ((x) << 16)
-#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-#define AT91_SMC_PS (3 << 28) /* Page Size */
-#define AT91_SMC_PS_4 (0 << 28)
-#define AT91_SMC_PS_8 (1 << 28)
-#define AT91_SMC_PS_16 (2 << 28)
-#define AT91_SMC_PS_32 (3 << 28)
-
-#endif
*/
static void at91rm9200_standby(void)
{
- u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+ u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR);
asm volatile(
"b 1f\n\t"
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
- : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
- "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+ : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR),
+ "r" (1), "r" (AT91_MC_SDRAMC_SRR),
"r" (lpr));
}
/*
* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
*/
- at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+ at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_MC;
#include <asm/proc-fns.h>
-#include <mach/at91_ramc.h>
+#include <linux/mfd/syscon/atmel-mc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_ramc_base[];
+
+#define at91_ramc_read(id, field) \
+ __raw_readl(at91_ramc_base[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+ __raw_writel(value, at91_ramc_base[id] + field)
+#endif
#define AT91_MEMCTRL_MC 0
#define AT91_MEMCTRL_SDRAMC 1
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
-#include <mach/at91_ramc.h>
#include "pm.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
/* Active SDRAM self-refresh mode */
mov r3, #1
- str r3, [r2, #AT91RM9200_SDRAMC_SRR]
+ str r3, [r2, #AT91_MC_SDRAMC_SRR]
b exit_sramc_sf
ddrc_sf:
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/sam9_smc.c
- *
- * Copyright (C) 2008 Andrew Victor
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-
-
-#define AT91_SMC_CS(id, n) (smc_base_addr[id] + ((n) * 0x10))
-
-static void __iomem *smc_base_addr[2];
-
-static void sam9_smc_cs_write_mode(void __iomem *base,
- struct sam9_smc_config *config)
-{
- __raw_writel(config->mode
- | AT91_SMC_TDF_(config->tdf_cycles),
- base + AT91_SMC_MODE);
-}
-
-void sam9_smc_write_mode(int id, int cs,
- struct sam9_smc_config *config)
-{
- sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
-
-static void sam9_smc_cs_configure(void __iomem *base,
- struct sam9_smc_config *config)
-{
-
- /* Setup register */
- __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
- | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
- | AT91_SMC_NRDSETUP_(config->nrd_setup)
- | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
- base + AT91_SMC_SETUP);
-
- /* Pulse register */
- __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
- | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
- | AT91_SMC_NRDPULSE_(config->nrd_pulse)
- | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
- base + AT91_SMC_PULSE);
-
- /* Cycle register */
- __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
- | AT91_SMC_NRDCYCLE_(config->read_cycle),
- base + AT91_SMC_CYCLE);
-
- /* Mode register */
- sam9_smc_cs_write_mode(base, config);
-}
-
-void sam9_smc_configure(int id, int cs,
- struct sam9_smc_config *config)
-{
- sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_configure);
-
-static void sam9_smc_cs_read_mode(void __iomem *base,
- struct sam9_smc_config *config)
-{
- u32 val = __raw_readl(base + AT91_SMC_MODE);
-
- config->mode = (val & ~AT91_SMC_NWECYCLE);
- config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
-}
-
-void sam9_smc_read_mode(int id, int cs,
- struct sam9_smc_config *config)
-{
- sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
-
-static void sam9_smc_cs_read(void __iomem *base,
- struct sam9_smc_config *config)
-{
- u32 val;
-
- /* Setup register */
- val = __raw_readl(base + AT91_SMC_SETUP);
-
- config->nwe_setup = val & AT91_SMC_NWESETUP;
- config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
- config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
- config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
-
- /* Pulse register */
- val = __raw_readl(base + AT91_SMC_PULSE);
-
- config->nwe_pulse = val & AT91_SMC_NWEPULSE;
- config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
- config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
- config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
-
- /* Cycle register */
- val = __raw_readl(base + AT91_SMC_CYCLE);
-
- config->write_cycle = val & AT91_SMC_NWECYCLE;
- config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
-
- /* Mode register */
- sam9_smc_cs_read_mode(base, config);
-}
-
-void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
-{
- sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
-}
-
-void __init at91sam9_ioremap_smc(int id, u32 addr)
-{
- if (id > 1) {
- pr_warn("%s: id > 2\n", __func__);
- return;
- }
- smc_base_addr[id] = ioremap(addr, 512);
- if (!smc_base_addr[id])
- pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/sam9_smc.
- *
- * Copyright (C) 2008 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init at91sam9_ioremap_smc(int id, u32 addr);
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select PINCTRL
+ select MTD_NAND_BRCMNAND
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
select BRCMSTB_GISB_ARB
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
# BCM63XXx
-obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o
+ifeq ($(CONFIG_ARCH_BCM_63XX),y)
+CFLAGS_bcm63xx_headsmp.o += -march=armv7-a
+obj-y += bcm63xx.o
+obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_headsmp.o \
+ bcm63xx_pmb.o
+endif
ifeq ($(CONFIG_ARCH_BRCMSTB),y)
CFLAGS_platsmp-brcmstb.o += -march=armv7-a
obj-y += brcmstb.o
-obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o
+obj-$(CONFIG_SMP) += platsmp-brcmstb.o
endif
--- /dev/null
+/*
+ * Copyright (C) 2015, Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+ENTRY(bcm63138_secondary_startup)
+ ARM_BE8(setend be)
+ /*
+ * L1 cache does have unpredictable contents at power-up clean its
+ * contents without flushing
+ */
+ bl v7_invalidate_l1
+ nop
+
+ b secondary_startup
+ENDPROC(bcm63138_secondary_startup)
--- /dev/null
+/*
+ * Broadcom BCM63138 PMB initialization for secondary CPU(s)
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/reset/bcm63xx_pmb.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "bcm63xx_smp.h"
+
+/* ARM Control register definitions */
+#define CORE_PWR_CTRL_SHIFT 0
+#define CORE_PWR_CTRL_MASK 0x3
+#define PLL_PWR_ON BIT(8)
+#define PLL_LDO_PWR_ON BIT(9)
+#define PLL_CLAMP_ON BIT(10)
+#define CPU_RESET_N(x) BIT(13 + (x))
+#define NEON_RESET_N BIT(15)
+#define PWR_CTRL_STATUS_SHIFT 28
+#define PWR_CTRL_STATUS_MASK 0x3
+#define PWR_DOWN_SHIFT 30
+#define PWR_DOWN_MASK 0x3
+
+/* CPU Power control register definitions */
+#define MEM_PWR_OK BIT(0)
+#define MEM_PWR_ON BIT(1)
+#define MEM_CLAMP_ON BIT(2)
+#define MEM_PWR_OK_STATUS BIT(4)
+#define MEM_PWR_ON_STATUS BIT(5)
+#define MEM_PDA_SHIFT 8
+#define MEM_PDA_MASK 0xf
+#define MEM_PDA_CPU_MASK 0x1
+#define MEM_PDA_NEON_MASK 0xf
+#define CLAMP_ON BIT(15)
+#define PWR_OK_SHIFT 16
+#define PWR_OK_MASK 0xf
+#define PWR_ON_SHIFT 20
+#define PWR_CPU_MASK 0x03
+#define PWR_NEON_MASK 0x01
+#define PWR_ON_MASK 0xf
+#define PWR_OK_STATUS_SHIFT 24
+#define PWR_OK_STATUS_MASK 0xf
+#define PWR_ON_STATUS_SHIFT 28
+#define PWR_ON_STATUS_MASK 0xf
+
+#define ARM_CONTROL 0x30
+#define ARM_PWR_CONTROL_BASE 0x34
+#define ARM_PWR_CONTROL(x) (ARM_PWR_CONTROL_BASE + (x) * 0x4)
+#define ARM_NEON_L2 0x3c
+
+/* Perform a value write, then spin until the value shifted by
+ * shift is seen, masked with mask and is different from cond.
+ */
+static int bpcm_wr_rd_mask(void __iomem *master,
+ unsigned int addr, u32 off, u32 *val,
+ u32 shift, u32 mask, u32 cond)
+{
+ int ret;
+
+ ret = bpcm_wr(master, addr, off, *val);
+ if (ret)
+ return ret;
+
+ do {
+ ret = bpcm_rd(master, addr, off, val);
+ if (ret)
+ return ret;
+
+ cpu_relax();
+ } while (((*val >> shift) & mask) != cond);
+
+ return ret;
+}
+
+/* Global lock to serialize accesses to the PMB registers while we
+ * are bringing up the secondary CPU
+ */
+static DEFINE_SPINLOCK(pmb_lock);
+
+static int bcm63xx_pmb_get_resources(struct device_node *dn,
+ void __iomem **base,
+ unsigned int *cpu,
+ unsigned int *addr)
+{
+ struct device_node *pmb_dn;
+ struct of_phandle_args args;
+ int ret;
+
+ ret = of_property_read_u32(dn, "reg", cpu);
+ if (ret) {
+ pr_err("CPU is missing a reg node\n");
+ return ret;
+ }
+
+ ret = of_parse_phandle_with_args(dn, "resets", "#reset-cells",
+ 0, &args);
+ if (ret) {
+ pr_err("CPU is missing a resets phandle\n");
+ return ret;
+ }
+
+ pmb_dn = args.np;
+ if (args.args_count != 2) {
+ pr_err("reset-controller does not conform to reset-cells\n");
+ return -EINVAL;
+ }
+
+ *base = of_iomap(args.np, 0);
+ if (!*base) {
+ pr_err("failed remapping PMB register\n");
+ return -ENOMEM;
+ }
+
+ /* We do not need the number of zones */
+ *addr = args.args[0];
+
+ return 0;
+}
+
+int bcm63xx_pmb_power_on_cpu(struct device_node *dn)
+{
+ void __iomem *base;
+ unsigned int cpu, addr;
+ unsigned long flags;
+ u32 val, ctrl;
+ int ret;
+
+ ret = bcm63xx_pmb_get_resources(dn, &base, &cpu, &addr);
+ if (ret)
+ return ret;
+
+ /* We would not know how to enable a third and greater CPU */
+ WARN_ON(cpu > 1);
+
+ spin_lock_irqsave(&pmb_lock, flags);
+
+ /* Check if the CPU is already on and save the ARM_CONTROL register
+ * value since we will use it later for CPU de-assert once done with
+ * the CPU-specific power sequence
+ */
+ ret = bpcm_rd(base, addr, ARM_CONTROL, &ctrl);
+ if (ret)
+ goto out;
+
+ if (ctrl & CPU_RESET_N(cpu)) {
+ pr_info("PMB: CPU%d is already powered on\n", cpu);
+ ret = 0;
+ goto out;
+ }
+
+ /* Power on PLL */
+ ret = bpcm_rd(base, addr, ARM_PWR_CONTROL(cpu), &val);
+ if (ret)
+ goto out;
+
+ val |= (PWR_CPU_MASK << PWR_ON_SHIFT);
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ PWR_ON_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK);
+ if (ret)
+ goto out;
+
+ val |= (PWR_CPU_MASK << PWR_OK_SHIFT);
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ PWR_OK_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK);
+ if (ret)
+ goto out;
+
+ val &= ~CLAMP_ON;
+
+ ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+ if (ret)
+ goto out;
+
+ /* Power on CPU<N> RAM */
+ val &= ~(MEM_PDA_MASK << MEM_PDA_SHIFT);
+
+ ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+ if (ret)
+ goto out;
+
+ val |= MEM_PWR_ON;
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ 0, MEM_PWR_ON_STATUS, MEM_PWR_ON_STATUS);
+ if (ret)
+ goto out;
+
+ val |= MEM_PWR_OK;
+
+ ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val,
+ 0, MEM_PWR_OK_STATUS, MEM_PWR_OK_STATUS);
+ if (ret)
+ goto out;
+
+ val &= ~MEM_CLAMP_ON;
+
+ ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val);
+ if (ret)
+ goto out;
+
+ /* De-assert CPU reset */
+ ctrl |= CPU_RESET_N(cpu);
+
+ ret = bpcm_wr(base, addr, ARM_CONTROL, ctrl);
+out:
+ spin_unlock_irqrestore(&pmb_lock, flags);
+ iounmap(base);
+ return ret;
+}
--- /dev/null
+/*
+ * Broadcom BCM63138 DSL SoCs SMP support code
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ *
+ * Licensed under the terms of the GPLv2
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/vfp.h>
+
+#include "bcm63xx_smp.h"
+
+/* Size of mapped Cortex A9 SCU address space */
+#define CORTEX_A9_SCU_SIZE 0x58
+
+/*
+ * Enable the Cortex A9 Snoop Control Unit
+ *
+ * By the time this is called we already know there are multiple
+ * cores present. We assume we're running on a Cortex A9 processor,
+ * so any trouble getting the base address register or getting the
+ * SCU base is a problem.
+ *
+ * Return 0 if successful or an error code otherwise.
+ */
+static int __init scu_a9_enable(void)
+{
+ unsigned long config_base;
+ void __iomem *scu_base;
+ unsigned int i, ncores;
+
+ if (!scu_a9_has_base()) {
+ pr_err("no configuration base address register!\n");
+ return -ENXIO;
+ }
+
+ /* Config base address register value is zero for uniprocessor */
+ config_base = scu_a9_get_base();
+ if (!config_base) {
+ pr_err("hardware reports only one core\n");
+ return -ENOENT;
+ }
+
+ scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+ if (!scu_base) {
+ pr_err("failed to remap config base (%lu/%u) for SCU\n",
+ config_base, CORTEX_A9_SCU_SIZE);
+ return -ENOMEM;
+ }
+
+ scu_enable(scu_base);
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ /* The BCM63138 SoC has two Cortex-A9 CPUs, CPU0 features a complete
+ * and fully functional VFP unit that can be used, but CPU1 does not.
+ * Since we will not be able to trap kernel-mode NEON to force
+ * migration to CPU0, just do not advertise VFP support at all.
+ *
+ * This will make vfp_init bail out and do not attempt to use VFP at
+ * all, for kernel-mode NEON, we do not want to introduce any
+ * conditionals in hot-paths, so we just restrict the system to UP.
+ */
+#ifdef CONFIG_VFP
+ if (ncores > 1) {
+ pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n");
+ vfp_disable();
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+ WARN(1, "SMP: kernel-mode NEON enabled, restricting to UP\n");
+ ncores = 1;
+#endif
+ }
+#endif
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ iounmap(scu_base); /* That's the last we'll need of this */
+
+ return 0;
+}
+
+static const struct of_device_id bcm63138_bootlut_ids[] = {
+ { .compatible = "brcm,bcm63138-bootlut", },
+ { /* sentinel */ },
+};
+
+#define BOOTLUT_RESET_VECT 0x20
+
+static int bcm63138_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ void __iomem *bootlut_base;
+ struct device_node *dn;
+ int ret = 0;
+ u32 val;
+
+ dn = of_find_matching_node(NULL, bcm63138_bootlut_ids);
+ if (!dn) {
+ pr_err("SMP: unable to find bcm63138 boot LUT node\n");
+ return -ENODEV;
+ }
+
+ bootlut_base = of_iomap(dn, 0);
+ of_node_put(dn);
+
+ if (!bootlut_base) {
+ pr_err("SMP: unable to remap boot LUT base register\n");
+ return -ENOMEM;
+ }
+
+ /* Locate the secondary CPU node */
+ dn = of_get_cpu_node(cpu_logical_map(cpu), NULL);
+ if (!dn) {
+ pr_err("SMP: failed to locate secondary CPU%d node\n", cpu);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Write the secondary init routine to the BootLUT reset vector */
+ val = virt_to_phys(bcm63138_secondary_startup);
+ writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT);
+
+ /* Power up the core, will jump straight to its reset vector when we
+ * return
+ */
+ ret = bcm63xx_pmb_power_on_cpu(dn);
+ if (ret)
+ goto out;
+out:
+ iounmap(bootlut_base);
+
+ return ret;
+}
+
+static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int ret;
+
+ ret = scu_a9_enable();
+ if (ret) {
+ pr_warn("SMP: Cortex-A9 SCU setup failed\n");
+ return;
+ }
+}
+
+struct smp_operations bcm63138_smp_ops __initdata = {
+ .smp_prepare_cpus = bcm63138_smp_prepare_cpus,
+ .smp_boot_secondary = bcm63138_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(bcm63138_smp, "brcm,bcm63138", &bcm63138_smp_ops);
--- /dev/null
+#ifndef __BCM63XX_SMP_H
+#define __BCM63XX_SMP_H
+
+struct device_node;
+
+extern void bcm63138_secondary_startup(void);
+extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn);
+
+#endif /* __BCM63XX_SMP_H */
static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
- if (fsr == 0x1c06 && first_fault) {
+ if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
first_fault = false;
/*
- * These faults with code 0x1c06 happens for no good reason,
- * possibly left over from the CFE boot loader.
+ * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
+ * for no good reason, possibly left over from the CFE boot
+ * loader.
*/
pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
- addr, fsr);
+ addr, fsr);
/* Returning non-zero causes fault display and panic */
return 0;
* GNU General Public License for more details.
*/
-#include <linux/delay.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#define PM_RSTC 0x1c
-#define PM_RSTS 0x20
-#define PM_WDOG 0x24
-
-#define PM_PASSWORD 0x5a000000
-#define PM_RSTC_WRCFG_MASK 0x00000030
-#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
-#define PM_RSTS_HADWRH_SET 0x00000040
-
-#define BCM2835_PERIPH_PHYS 0x20000000
-#define BCM2835_PERIPH_VIRT 0xf0000000
-#define BCM2835_PERIPH_SIZE SZ_16M
-
-static void __iomem *wdt_regs;
-
-/*
- * The machine restart method can be called from an atomic context so we won't
- * be able to ioremap the regs then.
- */
-static void bcm2835_setup_restart(void)
-{
- struct device_node *np = of_find_compatible_node(NULL, NULL,
- "brcm,bcm2835-pm-wdt");
- if (WARN(!np, "unable to setup watchdog restart"))
- return;
-
- wdt_regs = of_iomap(np, 0);
- WARN(!wdt_regs, "failed to remap watchdog regs");
-}
-
-static void bcm2835_restart(enum reboot_mode mode, const char *cmd)
-{
- u32 val;
-
- if (!wdt_regs)
- return;
-
- /* use a timeout of 10 ticks (~150us) */
- writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG);
- val = readl_relaxed(wdt_regs + PM_RSTC);
- val &= ~PM_RSTC_WRCFG_MASK;
- val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
- writel_relaxed(val, wdt_regs + PM_RSTC);
-
- /* No sleeping, possibly atomic. */
- mdelay(1);
-}
-
-/*
- * We can't really power off, but if we do the normal reset scheme, and
- * indicate to bootcode.bin not to reboot, then most of the chip will be
- * powered off.
- */
-static void bcm2835_power_off(void)
-{
- u32 val;
-
- /*
- * We set the watchdog hard reset bit here to distinguish this reset
- * from the normal (full) reset. bootcode.bin will not reboot after a
- * hard reset.
- */
- val = readl_relaxed(wdt_regs + PM_RSTS);
- val &= ~PM_RSTC_WRCFG_MASK;
- val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
- writel_relaxed(val, wdt_regs + PM_RSTS);
-
- /* Continue with normal reset mechanism */
- bcm2835_restart(REBOOT_HARD, "");
-}
-
-static struct map_desc io_map __initdata = {
- .virtual = BCM2835_PERIPH_VIRT,
- .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
- .length = BCM2835_PERIPH_SIZE,
- .type = MT_DEVICE
-};
-
-static void __init bcm2835_map_io(void)
-{
- iotable_init(&io_map, 1);
-}
-
static void __init bcm2835_init(void)
{
int ret;
- bcm2835_setup_restart();
- if (wdt_regs)
- pm_power_off = bcm2835_power_off;
-
bcm2835_init_clocks();
ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
};
DT_MACHINE_START(BCM2835, "BCM2835")
- .map_io = bcm2835_map_io,
- .init_irq = irqchip_init,
.init_machine = bcm2835_init,
- .restart = bcm2835_restart,
.dt_compat = bcm2835_compat
MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BRCMSTB_H__
-#define __BRCMSTB_H__
-
-void brcmstb_secondary_startup(void);
-
-#endif /* __BRCMSTB_H__ */
+++ /dev/null
-/*
- * SMP boot code for secondary CPUs
- * Based on arch/arm/mach-tegra/headsmp.S
- *
- * Copyright (C) 2010 NVIDIA, Inc.
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/assembler.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- .section ".text.head", "ax"
-
-ENTRY(brcmstb_secondary_startup)
- /*
- * Ensure CPU is in a sane state by disabling all IRQs and switching
- * into SVC mode.
- */
- setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
-
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(brcmstb_secondary_startup)
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
-#include "brcmstb.h"
-
enum {
ZONE_MAN_CLKEN_MASK = BIT(0),
ZONE_MAN_RESET_CNTL_MASK = BIT(1),
* Set the reset vector to point to the secondary_startup
* routine
*/
- cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
+ cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup));
/* Unhalt the cpu */
cpu_rst_cfg_set(cpu, 0);
select DW_APB_ICTL
select DW_APB_TIMER_OF
select GENERIC_IRQ_CHIP
+ select MFD_SYSCON
select PINCTRL
if ARCH_BERLIN
#include <linux/init.h>
#include <asm/assembler.h>
-ENTRY(berlin_secondary_startup)
- ARM_BE8(setend be)
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(berlin_secondary_startup)
-
/*
* If the following instruction is set in the reset exception vector, CPUs
* will fetch the value of the software reset address vector when being
#define RESET_VECT 0x00
#define SW_RESET_ADDR 0x94
-extern void berlin_secondary_startup(void);
extern u32 boot_inst;
static void __iomem *cpu_ctrl;
* Write the secondary startup address into the SW reset address
* vector. This is used by boot_inst.
*/
- writel(virt_to_phys(berlin_secondary_startup), vectors_base + SW_RESET_ADDR);
+ writel(virt_to_phys(secondary_startup), vectors_base + SW_RESET_ADDR);
iounmap(vectors_base);
unmap_scu:
/*
* If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
- * (than the regular 300Mhz variant), the board code should set this up
+ * (than the regular 300MHz variant), the board code should set this up
* with the supported speed before calling da850_register_cpufreq().
*/
extern unsigned int da850_max_speed;
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/platform_data/video-ep93xx.h>
+#include <linux/platform_data/spi-ep93xx.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
};
+/*
+ * GPIO lines used for MMC card detection.
+ */
+#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
+
+/*
+ * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
+ * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
+ * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
+ */
+#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO1
+
+/*
+ * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
+ * you can leave these empty and pass NULL as .controller_data.
+ */
+
+static int simone_mmc_spi_setup(struct spi_device *spi)
+{
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+ int err;
+
+ err = gpio_request(gpio, spi->modalias);
+ if (err)
+ return err;
+
+ err = gpio_direction_output(gpio, 1);
+ if (err) {
+ gpio_free(gpio);
+ return err;
+ }
+
+ return 0;
+}
+
+static void simone_mmc_spi_cleanup(struct spi_device *spi)
+{
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+
+ gpio_set_value(gpio, 1);
+ gpio_direction_input(gpio);
+ gpio_free(gpio);
+}
+
+static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
+}
+
+static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
+ .setup = simone_mmc_spi_setup,
+ .cleanup = simone_mmc_spi_cleanup,
+ .cs_control = simone_mmc_spi_cs_control,
+};
+
+/*
+ * MMC card detection GPIO setup.
+ */
+
+static int simone_mmc_spi_init(struct device *dev,
+ irqreturn_t (*irq_handler)(int, void *), void *mmc)
+{
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
+ int irq, err;
+
+ err = gpio_request(gpio, dev_name(dev));
+ if (err)
+ return err;
+
+ err = gpio_direction_input(gpio);
+ if (err)
+ goto fail;
+
+ irq = gpio_to_irq(gpio);
+ if (irq < 0)
+ goto fail;
+
+ err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
+ "MMC card detect", mmc);
+ if (err)
+ goto fail;
+
+ printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
+ dev_name(dev), irq);
+
+ return 0;
+fail:
+ gpio_free(gpio);
+ return err;
+}
+
+static void simone_mmc_spi_exit(struct device *dev, void *mmc)
+{
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
+
+ free_irq(gpio_to_irq(gpio), mmc);
+ gpio_free(gpio);
+}
+
+static struct mmc_spi_platform_data simone_mmc_spi_data = {
+ .init = simone_mmc_spi_init,
+ .exit = simone_mmc_spi_exit,
+ .detect_delay = 500,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info simone_spi_devices[] __initdata = {
+ {
+ .modalias = "mmc_spi",
+ .controller_data = &simone_mmc_spi_ops,
+ .platform_data = &simone_mmc_spi_data,
+ /*
+ * We use 10 MHz even though the maximum is 3.7 MHz. The driver
+ * will limit it automatically to max. frequency.
+ */
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info simone_spi_info __initdata = {
+ .num_chipselect = ARRAY_SIZE(simone_spi_devices),
+};
+
static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
ep93xx_register_fb(&simone_fb_info);
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
ARRAY_SIZE(simone_i2c_board_info));
+ ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
+ ARRAY_SIZE(simone_spi_devices));
simone_register_audio();
}
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
-extern void __iomem *cpu_boot_reg_base(void);
+extern void exynos_core_restart(u32 core_id);
+extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
+extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
static inline void pmu_raw_writel(u32 val, u32 offset)
{
exynos_sysram_init();
#if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE)
- if (of_machine_is_compatible("samsung,exynos4210"))
+ if (of_machine_is_compatible("samsung,exynos4210") ||
+ of_machine_is_compatible("samsung,exynos3250"))
exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
#endif
if (of_machine_is_compatible("samsung,exynos4210") ||
sysram_ns_base_addr + 0x24);
__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
if (soc_is_exynos3250()) {
+ flush_cache_all();
exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
SMC_POWERSTATE_IDLE, 0);
exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
return 0;
}
+static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
+{
+ void __iomem *boot_reg;
+
+ if (!sysram_ns_base_addr)
+ return -ENODEV;
+
+ boot_reg = sysram_ns_base_addr + 0x1c;
+
+ if (soc_is_exynos4412())
+ boot_reg += 4 * cpu;
+
+ *boot_addr = __raw_readl(boot_reg);
+ return 0;
+}
+
static int exynos_cpu_suspend(unsigned long arg)
{
flush_cache_all();
static const struct firmware_ops exynos_firmware_ops = {
.do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
.set_cpu_boot_addr = exynos_set_cpu_boot_addr,
+ .get_cpu_boot_addr = exynos_get_cpu_boot_addr,
.cpu_boot = exynos_cpu_boot,
.suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
.resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
S5P_CORE_LOCAL_PWR_EN);
}
-void __iomem *cpu_boot_reg_base(void)
+static void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
return pmu_base_addr + S5P_INFORM5;
*
* Currently this is needed only when booting secondary CPU on Exynos3250.
*/
-static void exynos_core_restart(u32 core_id)
+void exynos_core_restart(u32 core_id)
{
u32 val;
val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
- pr_info("CPU%u: Software reset\n", core_id);
pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET);
}
spin_unlock(&boot_lock);
}
+int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
+{
+ int ret;
+
+ /*
+ * Try to set boot address using firmware first
+ * and fall back to boot register if it fails.
+ */
+ ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
+ if (ret && ret != -ENOSYS)
+ goto fail;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+ if (IS_ERR(boot_reg)) {
+ ret = PTR_ERR(boot_reg);
+ goto fail;
+ }
+ __raw_writel(boot_addr, boot_reg);
+ ret = 0;
+ }
+fail:
+ return ret;
+}
+
+int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
+{
+ int ret;
+
+ /*
+ * Try to get boot address using firmware first
+ * and fall back to boot register if it fails.
+ */
+ ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr);
+ if (ret && ret != -ENOSYS)
+ goto fail;
+ if (ret == -ENOSYS) {
+ void __iomem *boot_reg = cpu_boot_reg(core_id);
+
+ if (IS_ERR(boot_reg)) {
+ ret = PTR_ERR(boot_reg);
+ goto fail;
+ }
+ *boot_addr = __raw_readl(boot_reg);
+ ret = 0;
+ }
+fail:
+ return ret;
+}
+
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
boot_addr = virt_to_phys(exynos4_secondary_startup);
- /*
- * Try to set boot address using firmware first
- * and fall back to boot register if it fails.
- */
- ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
- if (ret && ret != -ENOSYS)
+ ret = exynos_set_boot_addr(core_id, boot_addr);
+ if (ret)
goto fail;
- if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(core_id);
-
- if (IS_ERR(boot_reg)) {
- ret = PTR_ERR(boot_reg);
- goto fail;
- }
- __raw_writel(boot_addr, boot_reg);
- }
call_firmware_op(cpu_boot, core_id);
udelay(10);
}
+ if (pen_release != -1)
+ ret = -ETIMEDOUT;
+
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup);
- ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
- if (ret && ret != -ENOSYS)
+ ret = exynos_set_boot_addr(core_id, boot_addr);
+ if (ret)
break;
- if (ret == -ENOSYS) {
- void __iomem *boot_reg = cpu_boot_reg(core_id);
-
- if (IS_ERR(boot_reg))
- break;
- __raw_writel(boot_addr, boot_reg);
- }
}
}
#include <asm/firmware.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
+#include <asm/cacheflush.h>
#include <mach/map.h>
* sequence, let's wait for one of these to happen
*/
while (exynos_cpu_power_state(1)) {
+ unsigned long boot_addr;
+
/*
* The other cpu may skip idle and boot back
* up again
* boot back up again, getting stuck in the
* boot rom code
*/
- if (__raw_readl(cpu_boot_reg_base()) == 0)
+ ret = exynos_get_boot_addr(1, &boot_addr);
+ if (ret)
+ goto fail;
+ ret = -1;
+ if (boot_addr == 0)
goto abort;
cpu_relax();
abort:
if (cpu_online(1)) {
+ unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
+
/*
* Set the boot vector to something non-zero
*/
- __raw_writel(virt_to_phys(exynos_cpu_resume),
- cpu_boot_reg_base());
+ ret = exynos_set_boot_addr(1, boot_addr);
+ if (ret)
+ goto fail;
dsb();
/*
while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN)
cpu_relax();
+ if (soc_is_exynos3250()) {
+ while (!pmu_raw_readl(S5P_PMU_SPARE2) &&
+ !atomic_read(&cpu1_wakeup))
+ cpu_relax();
+
+ if (!atomic_read(&cpu1_wakeup))
+ exynos_core_restart(1);
+ }
+
while (!atomic_read(&cpu1_wakeup)) {
+ smp_rmb();
+
/*
* Poke cpu1 out of the boot rom
*/
- __raw_writel(virt_to_phys(exynos_cpu_resume),
- cpu_boot_reg_base());
- arch_send_wakeup_ipi_mask(cpumask_of(1));
+ ret = exynos_set_boot_addr(1, boot_addr);
+ if (ret)
+ goto fail;
+
+ call_firmware_op(cpu_boot, 1);
+
+ if (soc_is_exynos3250())
+ dsb_sev();
+ else
+ arch_send_wakeup_ipi_mask(cpumask_of(1));
}
}
-
+fail:
return ret;
}
static int exynos_wfi_finisher(unsigned long flags)
{
+ if (soc_is_exynos3250())
+ flush_cache_all();
cpu_do_idle();
return -1;
*/
exynos_cpu_power_down(1);
+ if (soc_is_exynos3250())
+ pmu_raw_writel(0, S5P_PMU_SPARE2);
+
ret = cpu_suspend(0, exynos_wfi_finisher);
cpu_pm_exit();
static void exynos_pre_enter_aftr(void)
{
- __raw_writel(virt_to_phys(exynos_cpu_resume), cpu_boot_reg_base());
+ unsigned long boot_addr = virt_to_phys(exynos_cpu_resume);
+
+ (void)exynos_set_boot_addr(1, boot_addr);
}
static void exynos_post_enter_aftr(void)
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
+ pd->pclk[i] = clk_get_parent(pd->clk[i]);
if (clk_set_parent(pd->clk[i], pd->oscclk))
pr_err("%s: error setting oscclk as parent to clock %d\n",
pd->name, i);
for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) {
if (IS_ERR(pd->clk[i]))
break;
+
+ if (IS_ERR(pd->clk[i]))
+ continue; /* Skip on first power up */
if (clk_set_parent(pd->clk[i], pd->pclk[i]))
pr_err("%s: error setting parent to clock%d\n",
pd->name, i);
static __init int exynos4_pm_init_power_domain(void)
{
- struct platform_device *pdev;
struct device_node *np;
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct exynos_pm_domain *pd;
int on, i;
- struct device *dev;
-
- pdev = of_find_device_by_node(np);
- dev = &pdev->dev;
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
pr_err("%s: failed to allocate memory for domain\n",
__func__);
+ of_node_put(np);
+ return -ENOMEM;
+ }
+ pd->pd.name = kstrdup_const(strrchr(np->full_name, '/') + 1,
+ GFP_KERNEL);
+ if (!pd->pd.name) {
+ kfree(pd);
+ of_node_put(np);
return -ENOMEM;
}
- pd->pd.name = kstrdup(dev_name(dev), GFP_KERNEL);
pd->name = pd->pd.name;
pd->base = of_iomap(np, 0);
+ if (!pd->base) {
+ pr_warn("%s: failed to map memory\n", __func__);
+ kfree(pd->pd.name);
+ kfree(pd);
+ of_node_put(np);
+ continue;
+ }
+
pd->pd.power_off = exynos_pd_power_off;
pd->pd.power_on = exynos_pd_power_on;
char clk_name[8];
snprintf(clk_name, sizeof(clk_name), "asb%d", i);
- pd->asb_clk[i] = clk_get(dev, clk_name);
+ pd->asb_clk[i] = of_clk_get_by_name(np, clk_name);
if (IS_ERR(pd->asb_clk[i]))
break;
}
- pd->oscclk = clk_get(dev, "oscclk");
+ pd->oscclk = of_clk_get_by_name(np, "oscclk");
if (IS_ERR(pd->oscclk))
goto no_clk;
char clk_name[8];
snprintf(clk_name, sizeof(clk_name), "clk%d", i);
- pd->clk[i] = clk_get(dev, clk_name);
+ pd->clk[i] = of_clk_get_by_name(np, clk_name);
if (IS_ERR(pd->clk[i]))
break;
- snprintf(clk_name, sizeof(clk_name), "pclk%d", i);
- pd->pclk[i] = clk_get(dev, clk_name);
- if (IS_ERR(pd->pclk[i])) {
- clk_put(pd->clk[i]);
- pd->clk[i] = ERR_PTR(-EINVAL);
- break;
- }
+ /*
+ * Skip setting parent on first power up.
+ * The parent at this time may not be useful at all.
+ */
+ pd->pclk[i] = ERR_PTR(-EINVAL);
}
if (IS_ERR(pd->clk[0]))
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(child_domain))
- continue;
+ goto next_pd;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
- continue;
+ goto next_pd;
parent_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(parent_domain))
- continue;
+ goto next_pd;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
+next_pd:
of_node_put(np);
}
return 0;
}
-arch_initcall(exynos4_pm_init_power_domain);
+core_initcall(exynos4_pm_init_power_domain);
EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
};
-static void exynos5_power_off(void)
+static void exynos_power_off(void)
{
unsigned int tmp;
EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
-
- pm_power_off = exynos5_power_off;
pr_info("EXYNOS5420 PMU initialized\n");
}
if (ret)
dev_warn(dev, "can't register restart handler err=%d\n", ret);
+ pm_power_off = exynos_power_off;
+
dev_dbg(dev, "Exynos PMU Driver probe done\n");
return 0;
}
static u32 exynos_irqwake_intmask = 0xffffffff;
static const struct exynos_wkup_irq exynos3250_wkup_irq[] = {
- { 105, BIT(1) }, /* RTC alarm */
- { 106, BIT(2) }, /* RTC tick */
+ { 73, BIT(1) }, /* RTC alarm */
+ { 74, BIT(2) }, /* RTC tick */
{ /* sentinel */ },
};
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
}
-static struct irq_domain_ops exynos_pmu_domain_ops = {
+static const struct irq_domain_ops exynos_pmu_domain_ops = {
.xlate = exynos_pmu_domain_xlate,
.alloc = exynos_pmu_domain_alloc,
.free = irq_domain_free_irqs_common,
obj-y += hisilicon.o
obj-$(CONFIG_MCPM) += platmcpm.o
-obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o hotplug.o
extern int hi3xxx_cpu_kill(unsigned int cpu);
extern void hi3xxx_set_cpu(int cpu, bool enable);
-extern void hisi_secondary_startup(void);
extern struct smp_operations hix5hd2_smp_ops;
extern void hix5hd2_set_cpu(int cpu, bool enable);
extern void hix5hd2_cpu_die(unsigned int cpu);
+++ /dev/null
-/*
- * Copyright (c) 2014 Hisilicon Limited.
- * Copyright (c) 2014 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
- __CPUINIT
-
-ENTRY(hisi_secondary_startup)
- bl v7_invalidate_l1
- b secondary_startup
{
phys_addr_t jumpaddr;
- jumpaddr = virt_to_phys(hisi_secondary_startup);
+ jumpaddr = virt_to_phys(secondary_startup);
hix5hd2_set_scu_boot_addr(HIX5HD2_BOOT_ADDRESS, jumpaddr);
hix5hd2_set_cpu(cpu, true);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
struct device_node *node;
- jumpaddr = virt_to_phys(hisi_secondary_startup);
+ jumpaddr = virt_to_phys(secondary_startup);
hip01_set_boot_addr(HIP01_BOOT_ADDRESS, jumpaddr);
node = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl");
menuconfig ARCH_MXC
- bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+ bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
- select CLKSRC_MMIO
+ select CLKSRC_IMX_GPT
select GENERIC_IRQ_CHIP
select PINCTRL
select PM_OPP if PM
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
-config MACH_EUKREA_CPUIMX35SD
- bool "Support Eukrea CPUIMX35 Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX35
- help
- Include support for Eukrea CPUIMX35 platform. This includes
- specific configurations for the board and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX35SD
- default MACH_EUKREA_MBIMXSD35_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD35_BASEBOARD
- bool "Eukrea MBIMXSD development board"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IPU_CORE
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
config MACH_VPR200
bool "Support VPR200 platform"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
endif
-if ARCH_MULTI_V5
-
comment "Device tree only"
+if ARCH_MULTI_V5
+
config SOC_IMX25
bool "i.MX25 support"
select ARCH_MXC_IOMUX_V3
if ARCH_MULTI_V7
-comment "Device tree only"
+comment "Cortex-A platforms"
config SOC_IMX5
bool
help
This enables support for Freescale i.MX6 SoloX processor.
+config SOC_IMX7D
+ bool "i.MX7 Dual support"
+ select PINCTRL_IMX7D
+ select ARM_GIC
+ select HAVE_IMX_ANATOP
+ select HAVE_IMX_MMDC
+ help
+ This enables support for Freescale i.MX7 Dual processor.
+
+config SOC_LS1021A
+ bool "Freescale LS1021A support"
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select PCI_DOMAINS if PCI
+ select ZONE_DMA if ARM_LPAE
+ help
+ This enables support for Freescale LS1021A processor.
+
+endif
+
+comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
+
+if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+
config SOC_VF610
bool "Vybrid Family VF610 support"
- select IRQ_DOMAIN_HIERARCHY
- select ARM_GIC
+ select ARM_GIC if ARCH_MULTI_V7
select PINCTRL_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
select SMP_ON_UP if SMP
default VF_USE_ARM_GLOBAL_TIMER
config VF_USE_ARM_GLOBAL_TIMER
- bool "Use ARM Global Timer"
+ bool "Use ARM Global Timer" if ARCH_MULTI_V7
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
help
endchoice
-config SOC_LS1021A
- bool "Freescale LS1021A support"
- select ARM_GIC
- select HAVE_ARM_ARCH_TIMER
- select PCI_DOMAINS if PCI
- select ZONE_DMA if ARM_LPAE
-
- help
- This enables support for Freescale LS1021A processor.
-
endif
source "arch/arm/mach-imx/devices/Kconfig"
-obj-y := time.o cpu.o system.o irq-common.o
+obj-y := cpu.o system.o irq-common.o
-obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
-obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
-obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
+obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y)
-
-obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
- clk-pfd.o clk-busy.o clk.o \
- clk-fixup-div.o clk-fixup-mux.o \
- clk-gate-exclusive.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
endif
-obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
-obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
-obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
+obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
+obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
+obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
-obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
+obj-$(CONFIG_SOC_VF610) += mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
#define ANADIG_USB2_CHRG_DETECT 0x210
#define ANADIG_DIGPROG 0x260
#define ANADIG_DIGPROG_IMX6SL 0x280
+#define ANADIG_DIGPROG_IMX7D 0x800
#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8
WARN_ON(!anatop_base);
if (of_device_is_compatible(np, "fsl,imx6sl-anatop"))
offset = ANADIG_DIGPROG_IMX6SL;
+ if (of_device_is_compatible(np, "fsl,imx7d-anatop"))
+ offset = ANADIG_DIGPROG_IMX7D;
digprog = readl_relaxed(anatop_base + offset);
iounmap(anatop_base);
+++ /dev/null
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2012 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/err.h>
-#include "clk.h"
-
-static int clk_busy_wait(void __iomem *reg, u8 shift)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
- while (readl_relaxed(reg) & (1 << shift))
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
-
- return 0;
-}
-
-struct clk_busy_divider {
- struct clk_divider div;
- const struct clk_ops *div_ops;
- void __iomem *reg;
- u8 shift;
-};
-
-static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
-{
- struct clk_divider *div = container_of(hw, struct clk_divider, hw);
-
- return container_of(div, struct clk_busy_divider, div);
-}
-
-static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_busy_divider *busy = to_clk_busy_divider(hw);
-
- return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
-}
-
-static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- struct clk_busy_divider *busy = to_clk_busy_divider(hw);
-
- return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
-}
-
-static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_busy_divider *busy = to_clk_busy_divider(hw);
- int ret;
-
- ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
- if (!ret)
- ret = clk_busy_wait(busy->reg, busy->shift);
-
- return ret;
-}
-
-static struct clk_ops clk_busy_divider_ops = {
- .recalc_rate = clk_busy_divider_recalc_rate,
- .round_rate = clk_busy_divider_round_rate,
- .set_rate = clk_busy_divider_set_rate,
-};
-
-struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
- void __iomem *reg, u8 shift, u8 width,
- void __iomem *busy_reg, u8 busy_shift)
-{
- struct clk_busy_divider *busy;
- struct clk *clk;
- struct clk_init_data init;
-
- busy = kzalloc(sizeof(*busy), GFP_KERNEL);
- if (!busy)
- return ERR_PTR(-ENOMEM);
-
- busy->reg = busy_reg;
- busy->shift = busy_shift;
-
- busy->div.reg = reg;
- busy->div.shift = shift;
- busy->div.width = width;
- busy->div.lock = &imx_ccm_lock;
- busy->div_ops = &clk_divider_ops;
-
- init.name = name;
- init.ops = &clk_busy_divider_ops;
- init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = &parent_name;
- init.num_parents = 1;
-
- busy->div.hw.init = &init;
-
- clk = clk_register(NULL, &busy->div.hw);
- if (IS_ERR(clk))
- kfree(busy);
-
- return clk;
-}
-
-struct clk_busy_mux {
- struct clk_mux mux;
- const struct clk_ops *mux_ops;
- void __iomem *reg;
- u8 shift;
-};
-
-static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
-{
- struct clk_mux *mux = container_of(hw, struct clk_mux, hw);
-
- return container_of(mux, struct clk_busy_mux, mux);
-}
-
-static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
-{
- struct clk_busy_mux *busy = to_clk_busy_mux(hw);
-
- return busy->mux_ops->get_parent(&busy->mux.hw);
-}
-
-static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
-{
- struct clk_busy_mux *busy = to_clk_busy_mux(hw);
- int ret;
-
- ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
- if (!ret)
- ret = clk_busy_wait(busy->reg, busy->shift);
-
- return ret;
-}
-
-static struct clk_ops clk_busy_mux_ops = {
- .get_parent = clk_busy_mux_get_parent,
- .set_parent = clk_busy_mux_set_parent,
-};
-
-struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
- u8 width, void __iomem *busy_reg, u8 busy_shift,
- const char **parent_names, int num_parents)
-{
- struct clk_busy_mux *busy;
- struct clk *clk;
- struct clk_init_data init;
-
- busy = kzalloc(sizeof(*busy), GFP_KERNEL);
- if (!busy)
- return ERR_PTR(-ENOMEM);
-
- busy->reg = busy_reg;
- busy->shift = busy_shift;
-
- busy->mux.reg = reg;
- busy->mux.shift = shift;
- busy->mux.mask = BIT(width) - 1;
- busy->mux.lock = &imx_ccm_lock;
- busy->mux_ops = &clk_mux_ops;
-
- init.name = name;
- init.ops = &clk_busy_mux_ops;
- init.flags = 0;
- init.parent_names = parent_names;
- init.num_parents = num_parents;
-
- busy->mux.hw.init = &init;
-
- clk = clk_register(NULL, &busy->mux.hw);
- if (IS_ERR(clk))
- kfree(busy);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright (c) 2014 Lucas Stach <l.stach@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/slab.h>
-
-struct clk_cpu {
- struct clk_hw hw;
- struct clk *div;
- struct clk *mux;
- struct clk *pll;
- struct clk *step;
-};
-
-static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw)
-{
- return container_of(hw, struct clk_cpu, hw);
-}
-
-static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_cpu *cpu = to_clk_cpu(hw);
-
- return clk_get_rate(cpu->div);
-}
-
-static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- struct clk_cpu *cpu = to_clk_cpu(hw);
-
- return clk_round_rate(cpu->pll, rate);
-}
-
-static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_cpu *cpu = to_clk_cpu(hw);
- int ret;
-
- /* switch to PLL bypass clock */
- ret = clk_set_parent(cpu->mux, cpu->step);
- if (ret)
- return ret;
-
- /* reprogram PLL */
- ret = clk_set_rate(cpu->pll, rate);
- if (ret) {
- clk_set_parent(cpu->mux, cpu->pll);
- return ret;
- }
- /* switch back to PLL clock */
- clk_set_parent(cpu->mux, cpu->pll);
-
- /* Ensure the divider is what we expect */
- clk_set_rate(cpu->div, rate);
-
- return 0;
-}
-
-static const struct clk_ops clk_cpu_ops = {
- .recalc_rate = clk_cpu_recalc_rate,
- .round_rate = clk_cpu_round_rate,
- .set_rate = clk_cpu_set_rate,
-};
-
-struct clk *imx_clk_cpu(const char *name, const char *parent_name,
- struct clk *div, struct clk *mux, struct clk *pll,
- struct clk *step)
-{
- struct clk_cpu *cpu;
- struct clk *clk;
- struct clk_init_data init;
-
- cpu = kzalloc(sizeof(*cpu), GFP_KERNEL);
- if (!cpu)
- return ERR_PTR(-ENOMEM);
-
- cpu->div = div;
- cpu->mux = mux;
- cpu->pll = pll;
- cpu->step = step;
-
- init.name = name;
- init.ops = &clk_cpu_ops;
- init.flags = 0;
- init.parent_names = &parent_name;
- init.num_parents = 1;
-
- cpu->hw.init = &init;
-
- clk = clk_register(NULL, &cpu->hw);
- if (IS_ERR(clk))
- kfree(cpu);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk-provider.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include "clk.h"
-
-#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw)
-#define div_mask(d) ((1 << (d->width)) - 1)
-
-/**
- * struct clk_fixup_div - imx integer fixup divider clock
- * @divider: the parent class
- * @ops: pointer to clk_ops of parent class
- * @fixup: a hook to fixup the write value
- *
- * The imx fixup divider clock is a subclass of basic clk_divider
- * with an addtional fixup hook.
- */
-struct clk_fixup_div {
- struct clk_divider divider;
- const struct clk_ops *ops;
- void (*fixup)(u32 *val);
-};
-
-static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw)
-{
- struct clk_divider *divider = to_clk_div(hw);
-
- return container_of(divider, struct clk_fixup_div, divider);
-}
-
-static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
-
- return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate);
-}
-
-static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
-
- return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate);
-}
-
-static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
- struct clk_divider *div = to_clk_div(hw);
- unsigned int divider, value;
- unsigned long flags = 0;
- u32 val;
-
- divider = parent_rate / rate;
-
- /* Zero based divider */
- value = divider - 1;
-
- if (value > div_mask(div))
- value = div_mask(div);
-
- spin_lock_irqsave(div->lock, flags);
-
- val = readl(div->reg);
- val &= ~(div_mask(div) << div->shift);
- val |= value << div->shift;
- fixup_div->fixup(&val);
- writel(val, div->reg);
-
- spin_unlock_irqrestore(div->lock, flags);
-
- return 0;
-}
-
-static const struct clk_ops clk_fixup_div_ops = {
- .recalc_rate = clk_fixup_div_recalc_rate,
- .round_rate = clk_fixup_div_round_rate,
- .set_rate = clk_fixup_div_set_rate,
-};
-
-struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
- void __iomem *reg, u8 shift, u8 width,
- void (*fixup)(u32 *val))
-{
- struct clk_fixup_div *fixup_div;
- struct clk *clk;
- struct clk_init_data init;
-
- if (!fixup)
- return ERR_PTR(-EINVAL);
-
- fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL);
- if (!fixup_div)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &clk_fixup_div_ops;
- init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = parent ? &parent : NULL;
- init.num_parents = parent ? 1 : 0;
-
- fixup_div->divider.reg = reg;
- fixup_div->divider.shift = shift;
- fixup_div->divider.width = width;
- fixup_div->divider.lock = &imx_ccm_lock;
- fixup_div->divider.hw.init = &init;
- fixup_div->ops = &clk_divider_ops;
- fixup_div->fixup = fixup;
-
- clk = clk_register(NULL, &fixup_div->divider.hw);
- if (IS_ERR(clk))
- kfree(fixup_div);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk-provider.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include "clk.h"
-
-#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
-
-/**
- * struct clk_fixup_mux - imx integer fixup multiplexer clock
- * @mux: the parent class
- * @ops: pointer to clk_ops of parent class
- * @fixup: a hook to fixup the write value
- *
- * The imx fixup multiplexer clock is a subclass of basic clk_mux
- * with an addtional fixup hook.
- */
-struct clk_fixup_mux {
- struct clk_mux mux;
- const struct clk_ops *ops;
- void (*fixup)(u32 *val);
-};
-
-static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw)
-{
- struct clk_mux *mux = to_clk_mux(hw);
-
- return container_of(mux, struct clk_fixup_mux, mux);
-}
-
-static u8 clk_fixup_mux_get_parent(struct clk_hw *hw)
-{
- struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
-
- return fixup_mux->ops->get_parent(&fixup_mux->mux.hw);
-}
-
-static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
-{
- struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
- struct clk_mux *mux = to_clk_mux(hw);
- unsigned long flags = 0;
- u32 val;
-
- spin_lock_irqsave(mux->lock, flags);
-
- val = readl(mux->reg);
- val &= ~(mux->mask << mux->shift);
- val |= index << mux->shift;
- fixup_mux->fixup(&val);
- writel(val, mux->reg);
-
- spin_unlock_irqrestore(mux->lock, flags);
-
- return 0;
-}
-
-static const struct clk_ops clk_fixup_mux_ops = {
- .get_parent = clk_fixup_mux_get_parent,
- .set_parent = clk_fixup_mux_set_parent,
-};
-
-struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
- u8 shift, u8 width, const char **parents,
- int num_parents, void (*fixup)(u32 *val))
-{
- struct clk_fixup_mux *fixup_mux;
- struct clk *clk;
- struct clk_init_data init;
-
- if (!fixup)
- return ERR_PTR(-EINVAL);
-
- fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL);
- if (!fixup_mux)
- return ERR_PTR(-ENOMEM);
-
- init.name = name;
- init.ops = &clk_fixup_mux_ops;
- init.parent_names = parents;
- init.num_parents = num_parents;
- init.flags = 0;
-
- fixup_mux->mux.reg = reg;
- fixup_mux->mux.shift = shift;
- fixup_mux->mux.mask = BIT(width) - 1;
- fixup_mux->mux.lock = &imx_ccm_lock;
- fixup_mux->mux.hw.init = &init;
- fixup_mux->ops = &clk_mux_ops;
- fixup_mux->fixup = fixup;
-
- clk = clk_register(NULL, &fixup_mux->mux.hw);
- if (IS_ERR(clk))
- kfree(fixup_mux);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include "clk.h"
-
-/**
- * struct clk_gate_exclusive - i.MX specific gate clock which is mutually
- * exclusive with other gate clocks
- *
- * @gate: the parent class
- * @exclusive_mask: mask of gate bits which are mutually exclusive to this
- * gate clock
- *
- * The imx exclusive gate clock is a subclass of basic clk_gate
- * with an addtional mask to indicate which other gate bits in the same
- * register is mutually exclusive to this gate clock.
- */
-struct clk_gate_exclusive {
- struct clk_gate gate;
- u32 exclusive_mask;
-};
-
-static int clk_gate_exclusive_enable(struct clk_hw *hw)
-{
- struct clk_gate *gate = container_of(hw, struct clk_gate, hw);
- struct clk_gate_exclusive *exgate = container_of(gate,
- struct clk_gate_exclusive, gate);
- u32 val = readl(gate->reg);
-
- if (val & exgate->exclusive_mask)
- return -EBUSY;
-
- return clk_gate_ops.enable(hw);
-}
-
-static void clk_gate_exclusive_disable(struct clk_hw *hw)
-{
- clk_gate_ops.disable(hw);
-}
-
-static int clk_gate_exclusive_is_enabled(struct clk_hw *hw)
-{
- return clk_gate_ops.is_enabled(hw);
-}
-
-static const struct clk_ops clk_gate_exclusive_ops = {
- .enable = clk_gate_exclusive_enable,
- .disable = clk_gate_exclusive_disable,
- .is_enabled = clk_gate_exclusive_is_enabled,
-};
-
-struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
- void __iomem *reg, u8 shift, u32 exclusive_mask)
-{
- struct clk_gate_exclusive *exgate;
- struct clk_gate *gate;
- struct clk *clk;
- struct clk_init_data init;
-
- if (exclusive_mask == 0)
- return ERR_PTR(-EINVAL);
-
- exgate = kzalloc(sizeof(*exgate), GFP_KERNEL);
- if (!exgate)
- return ERR_PTR(-ENOMEM);
- gate = &exgate->gate;
-
- init.name = name;
- init.ops = &clk_gate_exclusive_ops;
- init.flags = CLK_SET_RATE_PARENT;
- init.parent_names = parent ? &parent : NULL;
- init.num_parents = parent ? 1 : 0;
-
- gate->reg = reg;
- gate->bit_idx = shift;
- gate->lock = &imx_ccm_lock;
- gate->hw.init = &init;
- exgate->exclusive_mask = exclusive_mask;
-
- clk = clk_register(NULL, &gate->hw);
- if (IS_ERR(clk))
- kfree(exgate);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
- * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Gated clock implementation
- */
-
-#include <linux/clk-provider.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include "clk.h"
-
-/**
- * DOC: basic gatable clock which can gate and ungate it's ouput
- *
- * Traits of this clock:
- * prepare - clk_(un)prepare only ensures parent is (un)prepared
- * enable - clk_enable and clk_disable are functional & control gating
- * rate - inherits rate from parent. No clk_set_rate support
- * parent - fixed parent. No clk_set_parent support
- */
-
-struct clk_gate2 {
- struct clk_hw hw;
- void __iomem *reg;
- u8 bit_idx;
- u8 flags;
- spinlock_t *lock;
- unsigned int *share_count;
-};
-
-#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw)
-
-static int clk_gate2_enable(struct clk_hw *hw)
-{
- struct clk_gate2 *gate = to_clk_gate2(hw);
- u32 reg;
- unsigned long flags = 0;
-
- spin_lock_irqsave(gate->lock, flags);
-
- if (gate->share_count && (*gate->share_count)++ > 0)
- goto out;
-
- reg = readl(gate->reg);
- reg |= 3 << gate->bit_idx;
- writel(reg, gate->reg);
-
-out:
- spin_unlock_irqrestore(gate->lock, flags);
-
- return 0;
-}
-
-static void clk_gate2_disable(struct clk_hw *hw)
-{
- struct clk_gate2 *gate = to_clk_gate2(hw);
- u32 reg;
- unsigned long flags = 0;
-
- spin_lock_irqsave(gate->lock, flags);
-
- if (gate->share_count) {
- if (WARN_ON(*gate->share_count == 0))
- goto out;
- else if (--(*gate->share_count) > 0)
- goto out;
- }
-
- reg = readl(gate->reg);
- reg &= ~(3 << gate->bit_idx);
- writel(reg, gate->reg);
-
-out:
- spin_unlock_irqrestore(gate->lock, flags);
-}
-
-static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
-{
- u32 val = readl(reg);
-
- if (((val >> bit_idx) & 1) == 1)
- return 1;
-
- return 0;
-}
-
-static int clk_gate2_is_enabled(struct clk_hw *hw)
-{
- struct clk_gate2 *gate = to_clk_gate2(hw);
-
- return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
-}
-
-static void clk_gate2_disable_unused(struct clk_hw *hw)
-{
- struct clk_gate2 *gate = to_clk_gate2(hw);
- unsigned long flags = 0;
- u32 reg;
-
- spin_lock_irqsave(gate->lock, flags);
-
- if (!gate->share_count || *gate->share_count == 0) {
- reg = readl(gate->reg);
- reg &= ~(3 << gate->bit_idx);
- writel(reg, gate->reg);
- }
-
- spin_unlock_irqrestore(gate->lock, flags);
-}
-
-static struct clk_ops clk_gate2_ops = {
- .enable = clk_gate2_enable,
- .disable = clk_gate2_disable,
- .disable_unused = clk_gate2_disable_unused,
- .is_enabled = clk_gate2_is_enabled,
-};
-
-struct clk *clk_register_gate2(struct device *dev, const char *name,
- const char *parent_name, unsigned long flags,
- void __iomem *reg, u8 bit_idx,
- u8 clk_gate2_flags, spinlock_t *lock,
- unsigned int *share_count)
-{
- struct clk_gate2 *gate;
- struct clk *clk;
- struct clk_init_data init;
-
- gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL);
- if (!gate)
- return ERR_PTR(-ENOMEM);
-
- /* struct clk_gate2 assignments */
- gate->reg = reg;
- gate->bit_idx = bit_idx;
- gate->flags = clk_gate2_flags;
- gate->lock = lock;
- gate->share_count = share_count;
-
- init.name = name;
- init.ops = &clk_gate2_ops;
- init.flags = flags;
- init.parent_names = parent_name ? &parent_name : NULL;
- init.num_parents = parent_name ? 1 : 0;
-
- gate->hw.init = &init;
-
- clk = clk_register(dev, &gate->hw);
- if (IS_ERR(clk))
- kfree(gate);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <dt-bindings/clock/imx1-clock.h>
-
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
-static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
- "prem", "fclk", };
-
-static struct clk *clk[IMX1_CLK_MAX];
-static struct clk_onecell_data clk_data;
-
-static void __iomem *ccm __initdata;
-#define CCM_CSCR (ccm + 0x0000)
-#define CCM_MPCTL0 (ccm + 0x0004)
-#define CCM_SPCTL0 (ccm + 0x000c)
-#define CCM_PCDR (ccm + 0x0020)
-#define SCM_GCCR (ccm + 0x0810)
-
-static void __init _mx1_clocks_init(unsigned long fref)
-{
- clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
- clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
- clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
- clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
- clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks));
- clk[IMX1_CLK_MPLL] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
- clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
- clk[IMX1_CLK_SPLL] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
- clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
- clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
- clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
- clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
- clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
- clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
- clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
- clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
- clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
- clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
- clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
- clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
- clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
- clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
- clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-}
-
-int __init mx1_clocks_init(unsigned long fref)
-{
- ccm = MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR);
-
- _mx1_clocks_init(fref);
-
- clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
- clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
- clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
- clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
- clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
- clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
- clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
- clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
- clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
- clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
- clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
- clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
- clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
- clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
- clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
- clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
-
- mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
-
- return 0;
-}
-
-static void __init mx1_clocks_init_dt(struct device_node *np)
-{
- ccm = of_iomap(np, 0);
- BUG_ON(!ccm);
-
- _mx1_clocks_init(32768);
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt);
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <dt-bindings/clock/imx21-clock.h>
-
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-static void __iomem *ccm __initdata;
-
-/* Register offsets */
-#define CCM_CSCR (ccm + 0x00)
-#define CCM_MPCTL0 (ccm + 0x04)
-#define CCM_SPCTL0 (ccm + 0x0c)
-#define CCM_PCDR0 (ccm + 0x18)
-#define CCM_PCDR1 (ccm + 0x1c)
-#define CCM_PCCR0 (ccm + 0x20)
-#define CCM_PCCR1 (ccm + 0x24)
-
-static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
-static const char *mpll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
-static const char *spll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
-static const char *ssi_sel_clks[] = { "spll_gate", "mpll_gate", };
-
-static struct clk *clk[IMX21_CLK_MAX];
-static struct clk_onecell_data clk_data;
-
-static void __init _mx21_clocks_init(unsigned long lref, unsigned long href)
-{
- BUG_ON(!ccm);
-
- clk[IMX21_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX21_CLK_CKIL] = imx_obtain_fixed_clock("ckil", lref);
- clk[IMX21_CLK_CKIH] = imx_obtain_fixed_clock("ckih", href);
- clk[IMX21_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
- clk[IMX21_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
-
- clk[IMX21_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
- clk[IMX21_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[IMX21_CLK_FPM_GATE] = imx_clk_gate("fpm_gate", "fpm", CCM_CSCR, 2);
- clk[IMX21_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
- clk[IMX21_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
- clk[IMX21_CLK_IPG] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
- clk[IMX21_CLK_HCLK] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
- clk[IMX21_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
- clk[IMX21_CLK_SPLL_SEL] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks, ARRAY_SIZE(spll_sel_clks));
- clk[IMX21_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 19, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[IMX21_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 20, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[IMX21_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 26, 3);
- clk[IMX21_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 29, 3);
-
- clk[IMX21_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
-
- clk[IMX21_CLK_SPLL] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
-
- clk[IMX21_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "fclk", CCM_PCDR0, 12, 4);
- clk[IMX21_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[IMX21_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
-
- clk[IMX21_CLK_PER1] = imx_clk_divider("per1", "mpll_gate", CCM_PCDR1, 0, 6);
- clk[IMX21_CLK_PER2] = imx_clk_divider("per2", "mpll_gate", CCM_PCDR1, 8, 6);
- clk[IMX21_CLK_PER3] = imx_clk_divider("per3", "mpll_gate", CCM_PCDR1, 16, 6);
- clk[IMX21_CLK_PER4] = imx_clk_divider("per4", "mpll_gate", CCM_PCDR1, 24, 6);
-
- clk[IMX21_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[IMX21_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[IMX21_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[IMX21_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[IMX21_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[IMX21_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[IMX21_CLK_SSI1_GATE] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
- clk[IMX21_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
- clk[IMX21_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[IMX21_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
- clk[IMX21_CLK_GPIO_GATE] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
- clk[IMX21_CLK_I2C_GATE] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
- clk[IMX21_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
- clk[IMX21_CLK_USB_GATE] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
- clk[IMX21_CLK_EMMA_GATE] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
- clk[IMX21_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ipg", CCM_PCCR0, 16);
- clk[IMX21_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ipg", CCM_PCCR0, 17);
- clk[IMX21_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[IMX21_CLK_NFC_GATE] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
- clk[IMX21_CLK_SLCDC_HCLK_GATE] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
- clk[IMX21_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
- clk[IMX21_CLK_BMI_GATE] = imx_clk_gate("bmi_gate", "hclk", CCM_PCCR0, 23);
- clk[IMX21_CLK_USB_HCLK_GATE] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
- clk[IMX21_CLK_SLCDC_GATE] = imx_clk_gate("slcdc_gate", "hclk", CCM_PCCR0, 25);
- clk[IMX21_CLK_LCDC_HCLK_GATE] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
- clk[IMX21_CLK_EMMA_HCLK_GATE] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
- clk[IMX21_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
- clk[IMX21_CLK_DMA_HCLK_GATE] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
- clk[IMX21_CLK_CSI_HCLK_GATE] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
-
- clk[IMX21_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
- clk[IMX21_CLK_WDOG_GATE] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
- clk[IMX21_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[IMX21_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[IMX21_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[IMX21_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[IMX21_CLK_RTC_GATE] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
- clk[IMX21_CLK_KPP_GATE] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
- clk[IMX21_CLK_OWIRE_GATE] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-}
-
-int __init mx21_clocks_init(unsigned long lref, unsigned long href)
-{
- ccm = ioremap(MX21_CCM_BASE_ADDR, SZ_2K);
-
- _mx21_clocks_init(lref, href);
-
- clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.0");
- clk_register_clkdev(clk[IMX21_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.1");
- clk_register_clkdev(clk[IMX21_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.2");
- clk_register_clkdev(clk[IMX21_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.3");
- clk_register_clkdev(clk[IMX21_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[IMX21_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.0");
- clk_register_clkdev(clk[IMX21_CLK_CSPI1_IPG_GATE], "ipg", "imx21-cspi.0");
- clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.1");
- clk_register_clkdev(clk[IMX21_CLK_CSPI2_IPG_GATE], "ipg", "imx21-cspi.1");
- clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.2");
- clk_register_clkdev(clk[IMX21_CLK_CSPI3_IPG_GATE], "ipg", "imx21-cspi.2");
- clk_register_clkdev(clk[IMX21_CLK_PER3], "per", "imx21-fb.0");
- clk_register_clkdev(clk[IMX21_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[IMX21_CLK_LCDC_HCLK_GATE], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[IMX21_CLK_USB_GATE], "per", "imx21-hcd.0");
- clk_register_clkdev(clk[IMX21_CLK_USB_HCLK_GATE], "ahb", "imx21-hcd.0");
- clk_register_clkdev(clk[IMX21_CLK_NFC_GATE], NULL, "imx21-nand.0");
- clk_register_clkdev(clk[IMX21_CLK_DMA_HCLK_GATE], "ahb", "imx21-dma");
- clk_register_clkdev(clk[IMX21_CLK_DMA_GATE], "ipg", "imx21-dma");
- clk_register_clkdev(clk[IMX21_CLK_WDOG_GATE], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0");
-
- mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
-
- return 0;
-}
-
-static void __init mx21_clocks_init_dt(struct device_node *np)
-{
- ccm = of_iomap(np, 0);
-
- _mx21_clocks_init(32768, 26000000);
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-CLK_OF_DECLARE(imx27_ccm, "fsl,imx21-ccm", mx21_clocks_init_dt);
+++ /dev/null
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-#define CCM_MPCTL 0x00
-#define CCM_UPCTL 0x04
-#define CCM_CCTL 0x08
-#define CCM_CGCR0 0x0C
-#define CCM_CGCR1 0x10
-#define CCM_CGCR2 0x14
-#define CCM_PCDR0 0x18
-#define CCM_PCDR1 0x1C
-#define CCM_PCDR2 0x20
-#define CCM_PCDR3 0x24
-#define CCM_RCSR 0x28
-#define CCM_CRDR 0x2C
-#define CCM_DCVR0 0x30
-#define CCM_DCVR1 0x34
-#define CCM_DCVR2 0x38
-#define CCM_DCVR3 0x3c
-#define CCM_LTR0 0x40
-#define CCM_LTR1 0x44
-#define CCM_LTR2 0x48
-#define CCM_LTR3 0x4c
-#define CCM_MCR 0x64
-
-#define ccm(x) (ccm_base + (x))
-
-static struct clk_onecell_data clk_data;
-
-static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
-static const char *per_sel_clks[] = { "ahb", "upll", };
-static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb",
- "ipg", "dummy", "dummy", "dummy",
- "dummy", "dummy", "per0", "per2",
- "per13", "per14", "usbotg_ahb", "dummy",};
-
-enum mx25_clks {
- dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
- per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel,
- per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
- per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
- per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
- csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per,
- gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per,
- pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per,
- uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb,
- esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb,
- reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg,
- cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg,
- reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9,
- gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12,
- iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg,
- pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
- sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
- uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
- wdt_ipg, cko_div, cko_sel, cko, clk_max
-};
-
-static struct clk *clk[clk_max];
-
-static int __init __mx25_clocks_init(unsigned long osc_rate,
- void __iomem *ccm_base)
-{
- BUG_ON(!ccm_base);
-
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[osc] = imx_clk_fixed("osc", osc_rate);
- clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
- clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
- clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
- clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
- clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2);
- clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2);
- clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6);
- clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
- clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
- clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6);
- clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks));
- clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30);
- clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
- clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
- clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
- clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6);
- clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6);
- clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6);
- clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6);
- clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6);
- clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6);
- clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6);
- clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6);
- clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6);
- clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6);
- clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6);
- clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
- clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
- clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
- clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1);
- clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2);
- clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3);
- clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
- clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
- clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
- clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
- clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
- clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9);
- clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10);
- clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11);
- clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12);
- clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
- clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
- clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
- clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16);
- /* CCM_CGCR0(17): reserved */
- clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
- clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19);
- clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20);
- clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
- clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
- clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
- clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
- clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25);
- clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
- clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27);
- clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
- /* CCM_CGCR0(29-31): reserved */
- /* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */
- clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2);
- clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3);
- clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4);
- clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1), 5);
- clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6);
- clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7);
- clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8);
- clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9);
- clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10);
- clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11);
- /* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */
- clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
- clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
- clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
- /* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */
- /* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */
- /* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */
- clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19);
- clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20);
- clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21);
- clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22);
- /* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */
- /* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */
- /* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */
- clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
- /* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */
- /* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */
- clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
- clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
- /* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */
- clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
- clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0);
- clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1);
- clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2);
- clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3);
- /* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */
- clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5);
- clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6);
- clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7);
- clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8);
- clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9);
- clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10);
- clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
- clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
- clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
- clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14);
- clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15);
- clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
- clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
- clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
- /* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
- clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_prepare_enable(clk[emi_ahb]);
-
- /* Clock source for gpt must be derived from AHB */
- clk_set_parent(clk[per5_sel], clk[ahb]);
-
- /*
- * Let's initially set up CLKO parent as ipg, since this configuration
- * is used on some imx25 board designs to clock the audio codec.
- */
- clk_set_parent(clk[cko_sel], clk[ipg]);
-
- return 0;
-}
-
-static void __init mx25_clocks_init_dt(struct device_node *np)
-{
- struct device_node *refnp;
- unsigned long osc_rate = 24000000;
- void __iomem *ccm;
-
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(refnp, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(refnp, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(refnp, "fsl,imx-osc"))
- osc_rate = rate;
- }
-
- ccm = of_iomap(np, 0);
- __mx25_clocks_init(osc_rate, ccm);
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);
+++ /dev/null
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <dt-bindings/clock/imx27-clock.h>
-
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-static void __iomem *ccm __initdata;
-
-/* Register offsets */
-#define CCM_CSCR (ccm + 0x00)
-#define CCM_MPCTL0 (ccm + 0x04)
-#define CCM_MPCTL1 (ccm + 0x08)
-#define CCM_SPCTL0 (ccm + 0x0c)
-#define CCM_SPCTL1 (ccm + 0x10)
-#define CCM_PCDR0 (ccm + 0x18)
-#define CCM_PCDR1 (ccm + 0x1c)
-#define CCM_PCCR0 (ccm + 0x20)
-#define CCM_PCCR1 (ccm + 0x24)
-#define CCM_CCSR (ccm + 0x28)
-
-static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
-static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
-static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", };
-static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
-static const char *clko_sel_clks[] = {
- "ckil", "fpm", "ckih_gate", "ckih_gate",
- "ckih_gate", "mpll", "spll", "cpu_div",
- "ahb", "ipg", "per1_div", "per2_div",
- "per3_div", "per4_div", "ssi1_div", "ssi2_div",
- "nfc_div", "mshc_div", "vpu_div", "60m",
- "32k", "usb_div", "dptc",
-};
-
-static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
-
-static struct clk *clk[IMX27_CLK_MAX];
-static struct clk_onecell_data clk_data;
-
-static void __init _mx27_clocks_init(unsigned long fref)
-{
- BUG_ON(!ccm);
-
- clk[IMX27_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX27_CLK_CKIH] = imx_clk_fixed("ckih", fref);
- clk[IMX27_CLK_CKIL] = imx_clk_fixed("ckil", 32768);
- clk[IMX27_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
- clk[IMX27_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
- clk[IMX27_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
- clk[IMX27_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
- clk[IMX27_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
- clk[IMX27_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
- clk[IMX27_CLK_SPLL] = imx_clk_pllv1("spll", "ckih_gate", CCM_SPCTL0);
- clk[IMX27_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[IMX27_CLK_MPLL_MAIN2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
- clk[IMX27_CLK_IPG] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
- } else {
- clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
- clk[IMX27_CLK_IPG] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
- }
-
- clk[IMX27_CLK_MSHC_DIV] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
- clk[IMX27_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
- clk[IMX27_CLK_PER1_DIV] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
- clk[IMX27_CLK_PER2_DIV] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
- clk[IMX27_CLK_PER3_DIV] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
- clk[IMX27_CLK_PER4_DIV] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
- clk[IMX27_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
- clk[IMX27_CLK_VPU_DIV] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
- clk[IMX27_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
- clk[IMX27_CLK_CPU_SEL] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
- clk[IMX27_CLK_CLKO_SEL] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
- else
- clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
-
- clk[IMX27_CLK_CLKO_DIV] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
- clk[IMX27_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[IMX27_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[IMX27_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[IMX27_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
- clk[IMX27_CLK_CLKO_EN] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
- clk[IMX27_CLK_SSI2_IPG_GATE] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[IMX27_CLK_SSI1_IPG_GATE] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[IMX27_CLK_SLCDC_IPG_GATE] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[IMX27_CLK_SDHC3_IPG_GATE] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[IMX27_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[IMX27_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[IMX27_CLK_SCC_IPG_GATE] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
- clk[IMX27_CLK_SAHARA_IPG_GATE] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
- clk[IMX27_CLK_RTIC_IPG_GATE] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
- clk[IMX27_CLK_RTC_IPG_GATE] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[IMX27_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
- clk[IMX27_CLK_OWIRE_IPG_GATE] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
- clk[IMX27_CLK_MSHC_IPG_GATE] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
- clk[IMX27_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
- clk[IMX27_CLK_KPP_IPG_GATE] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
- clk[IMX27_CLK_IIM_IPG_GATE] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
- clk[IMX27_CLK_I2C2_IPG_GATE] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
- clk[IMX27_CLK_I2C1_IPG_GATE] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[IMX27_CLK_GPT6_IPG_GATE] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
- clk[IMX27_CLK_GPT5_IPG_GATE] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
- clk[IMX27_CLK_GPT4_IPG_GATE] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
- clk[IMX27_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
- clk[IMX27_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
- clk[IMX27_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
- clk[IMX27_CLK_GPIO_IPG_GATE] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
- clk[IMX27_CLK_FEC_IPG_GATE] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
- clk[IMX27_CLK_EMMA_IPG_GATE] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
- clk[IMX27_CLK_DMA_IPG_GATE] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
- clk[IMX27_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
- clk[IMX27_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
- clk[IMX27_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
- clk[IMX27_CLK_MSHC_BAUD_GATE] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
- clk[IMX27_CLK_NFC_BAUD_GATE] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
- clk[IMX27_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
- clk[IMX27_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
- clk[IMX27_CLK_VPU_BAUD_GATE] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
- clk[IMX27_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
- clk[IMX27_CLK_PER3_GATE] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
- clk[IMX27_CLK_PER2_GATE] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
- clk[IMX27_CLK_PER1_GATE] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
- clk[IMX27_CLK_USB_AHB_GATE] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
- clk[IMX27_CLK_SLCDC_AHB_GATE] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
- clk[IMX27_CLK_SAHARA_AHB_GATE] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
- clk[IMX27_CLK_RTIC_AHB_GATE] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
- clk[IMX27_CLK_LCDC_AHB_GATE] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
- clk[IMX27_CLK_VPU_AHB_GATE] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
- clk[IMX27_CLK_FEC_AHB_GATE] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
- clk[IMX27_CLK_EMMA_AHB_GATE] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
- clk[IMX27_CLK_EMI_AHB_GATE] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
- clk[IMX27_CLK_DMA_AHB_GATE] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
- clk[IMX27_CLK_CSI_AHB_GATE] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
- clk[IMX27_CLK_BROM_AHB_GATE] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
- clk[IMX27_CLK_ATA_AHB_GATE] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
- clk[IMX27_CLK_WDOG_IPG_GATE] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
- clk[IMX27_CLK_USB_IPG_GATE] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[IMX27_CLK_UART6_IPG_GATE] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[IMX27_CLK_UART5_IPG_GATE] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[IMX27_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[IMX27_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
- clk[IMX27_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
- clk[IMX27_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_register_clkdev(clk[IMX27_CLK_CPU_DIV], NULL, "cpu0");
-
- clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
-
- imx_print_silicon_rev("i.MX27", mx27_revision());
-}
-
-int __init mx27_clocks_init(unsigned long fref)
-{
- ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);
-
- _mx27_clocks_init(fref);
-
- clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
- clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
- clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
- clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
- clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
- clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
- clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
- clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
- clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
- clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
- clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
- clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
- clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
- clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
- clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
- clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
- clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
- clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
- clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
- clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
- clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
- clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
- clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
- clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
-
- mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
-
- return 0;
-}
-
-static void __init mx27_clocks_init_dt(struct device_node *np)
-{
- struct device_node *refnp;
- u32 fref = 26000000; /* default */
-
- for_each_compatible_node(refnp, NULL, "fixed-clock") {
- if (!of_device_is_compatible(refnp, "fsl,imx-osc26m"))
- continue;
-
- if (!of_property_read_u32(refnp, "clock-frequency", &fref))
- break;
- }
-
- ccm = of_iomap(np, 0);
-
- _mx27_clocks_init(fref);
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-CLK_OF_DECLARE(imx27_ccm, "fsl,imx27-ccm", mx27_clocks_init_dt);
+++ /dev/null
-/*
- * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/of.h>
-
-#include "clk.h"
-#include "common.h"
-#include "crmregs-imx3.h"
-#include "hardware.h"
-#include "mx31.h"
-
-static const char *mcu_main_sel[] = { "spll", "mpll", };
-static const char *per_sel[] = { "per_div", "ipg", };
-static const char *csi_sel[] = { "upll", "spll", };
-static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
-
-enum mx31_clks {
- dummy, ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg,
- per_div, per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
- fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
- iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
- uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
- mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate,
- sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate,
- uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate,
- gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max
-};
-
-static struct clk *clk[clk_max];
-static struct clk_onecell_data clk_data;
-
-int __init mx31_clocks_init(unsigned long fref)
-{
- void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
- struct device_node *np;
-
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[ckih] = imx_clk_fixed("ckih", fref);
- clk[ckil] = imx_clk_fixed("ckil", 32768);
- clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
- clk[spll] = imx_clk_pllv1("spll", "ckih", base + MXC_CCM_SRPCTL);
- clk[upll] = imx_clk_pllv1("upll", "ckih", base + MXC_CCM_UPCTL);
- clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel));
- clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3);
- clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3);
- clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3);
- clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2);
- clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5);
- clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel));
- clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel));
- clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel));
- clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9);
- clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2);
- clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3);
- clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3);
- clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6);
- clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0);
- clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4);
- clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6);
- clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8);
- clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10);
- clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12);
- clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14);
- clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16);
- clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18);
- clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20);
- clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22);
- clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24);
- clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26);
- clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28);
- clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30);
- clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0);
- clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2);
- clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4);
- clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6);
- clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8);
- clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10);
- clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12);
- clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14);
- clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16);
- clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18);
- clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20);
- clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22);
- clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24);
- clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26);
- clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28);
- clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30);
- clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0);
- clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2);
- clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4);
- clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6);
- clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8);
- clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
- clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
-
- if (np) {
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
-
- clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
- clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
- clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
- clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
- clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
- clk_register_clkdev(clk[epit1_gate], "epit", NULL);
- clk_register_clkdev(clk[epit2_gate], "epit", NULL);
- clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
- clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
- clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
- clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
- /* i.mx31 has the i.mx21 type uart */
- clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
- clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
- clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[firi_gate], "firi", NULL);
- clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
- clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
- clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga");
- clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
- clk_register_clkdev(clk[iim_gate], "iim", NULL);
-
- clk_set_parent(clk[csi], clk[upll]);
- clk_prepare_enable(clk[emi_gate]);
- clk_prepare_enable(clk[iim_gate]);
- mx31_revision();
- clk_disable_unprepare(clk[iim_gate]);
-
- mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
-
- return 0;
-}
-
-int __init mx31_clocks_init_dt(void)
-{
- struct device_node *np;
- u32 fref = 26000000; /* default */
-
- for_each_compatible_node(np, NULL, "fixed-clock") {
- if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
- continue;
-
- if (!of_property_read_u32(np, "clock-frequency", &fref))
- break;
- }
-
- return mx31_clocks_init(fref);
-}
+++ /dev/null
-/*
- * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-#include <linux/err.h>
-
-#include "crmregs-imx3.h"
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-struct arm_ahb_div {
- unsigned char arm, ahb, sel;
-};
-
-static struct arm_ahb_div clk_consumer[] = {
- { .arm = 1, .ahb = 4, .sel = 0},
- { .arm = 1, .ahb = 3, .sel = 1},
- { .arm = 2, .ahb = 2, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 4, .ahb = 1, .sel = 0},
- { .arm = 1, .ahb = 5, .sel = 0},
- { .arm = 1, .ahb = 8, .sel = 0},
- { .arm = 1, .ahb = 6, .sel = 1},
- { .arm = 2, .ahb = 4, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 4, .ahb = 2, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
-};
-
-static char hsp_div_532[] = { 4, 8, 3, 0 };
-static char hsp_div_400[] = { 3, 6, 3, 0 };
-
-static struct clk_onecell_data clk_data;
-
-static const char *std_sel[] = {"ppll", "arm"};
-static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
-
-enum mx35_clks {
- ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
- arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
- esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
- spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
- ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate,
- audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate,
- edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate,
- esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate,
- gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate,
- kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
- rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
- ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
- wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate,
- gpu2d_gate, clk_max
-};
-
-static struct clk *clk[clk_max];
-
-int __init mx35_clocks_init(void)
-{
- void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
- u32 pdr0, consumer_sel, hsp_sel;
- struct arm_ahb_div *aad;
- unsigned char *hsp_div;
-
- pdr0 = __raw_readl(base + MXC_CCM_PDR0);
- consumer_sel = (pdr0 >> 16) & 0xf;
- aad = &clk_consumer[consumer_sel];
- if (!aad->arm) {
- pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);
- /*
- * We are basically stuck. Continue with a default entry and hope we
- * get far enough to actually show the above message
- */
- aad = &clk_consumer[0];
- }
-
- clk[ckih] = imx_clk_fixed("ckih", 24000000);
- clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MX35_CCM_MPCTL);
- clk[ppll] = imx_clk_pllv1("ppll", "ckih", base + MX35_CCM_PPCTL);
-
- clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4);
-
- if (aad->sel)
- clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm);
- else
- clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm);
-
- if (clk_get_rate(clk[arm]) > 400000000)
- hsp_div = hsp_div_532;
- else
- hsp_div = hsp_div_400;
-
- hsp_sel = (pdr0 >> 20) & 0x3;
- if (!hsp_div[hsp_sel]) {
- pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);
- hsp_sel = 0;
- }
-
- clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]);
-
- clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb);
- clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
-
- clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6);
- clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3);
- clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel));
-
- clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel));
- clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6);
-
- clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
- clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6);
- clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6);
- clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6);
-
- clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel));
- clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */
- clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6);
-
- clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel));
- clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3);
- clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6);
- clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3);
- clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6);
-
- clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
- clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6);
-
- clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
-
- clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel));
- clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6);
-
- clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0);
- clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2);
- clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4);
- clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0, 6);
- clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0, 8);
- clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10);
- clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12);
- clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14);
- clk[edio_gate] = imx_clk_gate2("edio_gate", "ipg", base + MX35_CCM_CGR0, 16);
- clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18);
- clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20);
- clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22);
- clk[esai_gate] = imx_clk_gate2("esai_gate", "ipg", base + MX35_CCM_CGR0, 24);
- clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26);
- clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28);
- clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30);
-
- clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1, 0);
- clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1, 2);
- clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1, 4);
- clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1, 6);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1, 8);
- clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10);
- clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12);
- clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14);
- clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16);
- clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18);
- clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20);
- clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22);
- clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24);
- clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26);
- clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28);
- clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30);
-
- clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2, 0);
- clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2, 2);
- clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2, 4);
- clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2, 6);
- clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2, 8);
- clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10);
- clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12);
- clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14);
- clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16);
- clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18);
- clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20);
- clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22);
- clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24);
- clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
- clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
-
- clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0);
- clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
- clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
- clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
- clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
- clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
- clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
- clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
- clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
- clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
- clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
- clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
- clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
- clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
- clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
- clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
- clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
- clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
- clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
- clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
- /* i.mx35 has the i.mx27 type fec */
- clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
- clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
- clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
- clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
- clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
- /* i.mx35 has the i.mx21 type uart */
- clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
- clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
- clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
- clk_register_clkdev(clk[admux_gate], "audmux", NULL);
-
- clk_prepare_enable(clk[spba_gate]);
- clk_prepare_enable(clk[gpio1_gate]);
- clk_prepare_enable(clk[gpio2_gate]);
- clk_prepare_enable(clk[gpio3_gate]);
- clk_prepare_enable(clk[iim_gate]);
- clk_prepare_enable(clk[emi_gate]);
- clk_prepare_enable(clk[max_gate]);
- clk_prepare_enable(clk[iomuxc_gate]);
-
- /*
- * SCC is needed to boot via mmc after a watchdog reset. The clock code
- * before conversion to common clk also enabled UART1 (which isn't
- * handled here and not needed for mmc) and IIM (which is enabled
- * unconditionally above).
- */
- clk_prepare_enable(clk[scc_gate]);
-
- imx_print_silicon_rev("i.MX35", mx35_revision());
-
-#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
-#else
- mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
-#endif
-
- return 0;
-}
-
-static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
-{
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data);
-
- mx35_clocks_init();
-}
-CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt);
+++ /dev/null
-/*
- * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <dt-bindings/clock/imx5-clock.h>
-
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-#define MX51_DPLL1_BASE 0x83f80000
-#define MX51_DPLL2_BASE 0x83f84000
-#define MX51_DPLL3_BASE 0x83f88000
-
-#define MX53_DPLL1_BASE 0x63f80000
-#define MX53_DPLL2_BASE 0x63f84000
-#define MX53_DPLL3_BASE 0x63f88000
-#define MX53_DPLL4_BASE 0x63f8c000
-
-#define MXC_CCM_CCR (ccm_base + 0x00)
-#define MXC_CCM_CCDR (ccm_base + 0x04)
-#define MXC_CCM_CSR (ccm_base + 0x08)
-#define MXC_CCM_CCSR (ccm_base + 0x0c)
-#define MXC_CCM_CACRR (ccm_base + 0x10)
-#define MXC_CCM_CBCDR (ccm_base + 0x14)
-#define MXC_CCM_CBCMR (ccm_base + 0x18)
-#define MXC_CCM_CSCMR1 (ccm_base + 0x1c)
-#define MXC_CCM_CSCMR2 (ccm_base + 0x20)
-#define MXC_CCM_CSCDR1 (ccm_base + 0x24)
-#define MXC_CCM_CS1CDR (ccm_base + 0x28)
-#define MXC_CCM_CS2CDR (ccm_base + 0x2c)
-#define MXC_CCM_CDCDR (ccm_base + 0x30)
-#define MXC_CCM_CHSCDR (ccm_base + 0x34)
-#define MXC_CCM_CSCDR2 (ccm_base + 0x38)
-#define MXC_CCM_CSCDR3 (ccm_base + 0x3c)
-#define MXC_CCM_CSCDR4 (ccm_base + 0x40)
-#define MXC_CCM_CWDR (ccm_base + 0x44)
-#define MXC_CCM_CDHIPR (ccm_base + 0x48)
-#define MXC_CCM_CDCR (ccm_base + 0x4c)
-#define MXC_CCM_CTOR (ccm_base + 0x50)
-#define MXC_CCM_CLPCR (ccm_base + 0x54)
-#define MXC_CCM_CISR (ccm_base + 0x58)
-#define MXC_CCM_CIMR (ccm_base + 0x5c)
-#define MXC_CCM_CCOSR (ccm_base + 0x60)
-#define MXC_CCM_CGPR (ccm_base + 0x64)
-#define MXC_CCM_CCGR0 (ccm_base + 0x68)
-#define MXC_CCM_CCGR1 (ccm_base + 0x6c)
-#define MXC_CCM_CCGR2 (ccm_base + 0x70)
-#define MXC_CCM_CCGR3 (ccm_base + 0x74)
-#define MXC_CCM_CCGR4 (ccm_base + 0x78)
-#define MXC_CCM_CCGR5 (ccm_base + 0x7c)
-#define MXC_CCM_CCGR6 (ccm_base + 0x80)
-#define MXC_CCM_CCGR7 (ccm_base + 0x84)
-
-/* Low-power Audio Playback Mode clock */
-static const char *lp_apm_sel[] = { "osc", };
-
-/* This is used multiple times */
-static const char *standard_pll_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "lp_apm", };
-static const char *periph_apm_sel[] = { "pll1_sw", "pll3_sw", "lp_apm", };
-static const char *main_bus_sel[] = { "pll2_sw", "periph_apm", };
-static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", };
-static const char *per_root_sel[] = { "per_podf", "ipg", };
-static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
-static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
-static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", };
-static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", };
-static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", };
-static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", };
-static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
-static const char *emi_slow_sel[] = { "main_bus", "ahb", };
-static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
-static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
-static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
-static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
-static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
-static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
-static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
-static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
-static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
-static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", };
-static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
-static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
-static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
-static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
-static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
-static const char *mx53_cko1_sel[] = {
- "cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw",
- "emi_slow_podf", "pll4_sw", "nfc_podf", "dummy",
- "di_pred", "dummy", "dummy", "ahb",
- "ipg", "per_root", "ckil", "dummy",};
-static const char *mx53_cko2_sel[] = {
- "dummy"/* dptc_core */, "dummy"/* dptc_perich */,
- "dummy", "esdhc_a_podf",
- "usboh3_podf", "dummy"/* wrck_clk_root */,
- "ecspi_podf", "dummy"/* pll1_ref_clk */,
- "esdhc_b_podf", "dummy"/* ddr_clk_root */,
- "dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */,
- "vpu_sel", "ipu_sel",
- "osc", "ckih1",
- "dummy", "esdhc_c_sel",
- "ssi1_root_podf", "ssi2_root_podf",
- "dummy", "dummy",
- "dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */,
- "dummy"/* tve_out */, "usb_phy_sel",
- "tve_sel", "lp_apm",
- "uart_root", "dummy"/* spdif0_clk_root */,
- "dummy", "dummy", };
-static const char *mx51_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", };
-static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", };
-static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", };
-static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", };
-static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
-static const char *step_sels[] = { "lp_apm", };
-static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" };
-
-static struct clk *clk[IMX5_CLK_END];
-static struct clk_onecell_data clk_data;
-
-static void __init mx5_clocks_common_init(void __iomem *ccm_base)
-{
- imx5_pm_set_ccm_base(ccm_base);
-
- clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
- clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
- clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", 0);
- clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", 0);
-
- clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
- periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
- clk[IMX5_CLK_MAIN_BUS] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
- main_bus_sel, ARRAY_SIZE(main_bus_sel));
- clk[IMX5_CLK_PER_LP_APM] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
- per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
- clk[IMX5_CLK_PER_PRED1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
- clk[IMX5_CLK_PER_PRED2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
- clk[IMX5_CLK_PER_PODF] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
- clk[IMX5_CLK_PER_ROOT] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
- per_root_sel, ARRAY_SIZE(per_root_sel));
- clk[IMX5_CLK_AHB] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
- clk[IMX5_CLK_AHB_MAX] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
- clk[IMX5_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", MXC_CCM_CCGR0, 24);
- clk[IMX5_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", MXC_CCM_CCGR0, 26);
- clk[IMX5_CLK_TMAX1] = imx_clk_gate2("tmax1", "ahb", MXC_CCM_CCGR1, 0);
- clk[IMX5_CLK_TMAX2] = imx_clk_gate2("tmax2", "ahb", MXC_CCM_CCGR1, 2);
- clk[IMX5_CLK_TMAX3] = imx_clk_gate2("tmax3", "ahb", MXC_CCM_CCGR1, 4);
- clk[IMX5_CLK_SPBA] = imx_clk_gate2("spba", "ipg", MXC_CCM_CCGR5, 0);
- clk[IMX5_CLK_IPG] = imx_clk_divider("ipg", "ahb", MXC_CCM_CBCDR, 8, 2);
- clk[IMX5_CLK_AXI_A] = imx_clk_divider("axi_a", "main_bus", MXC_CCM_CBCDR, 16, 3);
- clk[IMX5_CLK_AXI_B] = imx_clk_divider("axi_b", "main_bus", MXC_CCM_CBCDR, 19, 3);
- clk[IMX5_CLK_UART_SEL] = imx_clk_mux("uart_sel", MXC_CCM_CSCMR1, 24, 2,
- standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
- clk[IMX5_CLK_UART_PRED] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3);
- clk[IMX5_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3);
-
- clk[IMX5_CLK_ESDHC_A_SEL] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
- standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
- clk[IMX5_CLK_ESDHC_B_SEL] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
- standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
- clk[IMX5_CLK_ESDHC_A_PRED] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3);
- clk[IMX5_CLK_ESDHC_A_PODF] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3);
- clk[IMX5_CLK_ESDHC_B_PRED] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3);
- clk[IMX5_CLK_ESDHC_B_PODF] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3);
- clk[IMX5_CLK_ESDHC_C_SEL] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
- clk[IMX5_CLK_ESDHC_D_SEL] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
-
- clk[IMX5_CLK_EMI_SEL] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1,
- emi_slow_sel, ARRAY_SIZE(emi_slow_sel));
- clk[IMX5_CLK_EMI_SLOW_PODF] = imx_clk_divider("emi_slow_podf", "emi_sel", MXC_CCM_CBCDR, 22, 3);
- clk[IMX5_CLK_NFC_PODF] = imx_clk_divider("nfc_podf", "emi_slow_podf", MXC_CCM_CBCDR, 13, 3);
- clk[IMX5_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", MXC_CCM_CSCMR1, 4, 2,
- standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
- clk[IMX5_CLK_ECSPI_PRED] = imx_clk_divider("ecspi_pred", "ecspi_sel", MXC_CCM_CSCDR2, 25, 3);
- clk[IMX5_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_pred", MXC_CCM_CSCDR2, 19, 6);
- clk[IMX5_CLK_USBOH3_SEL] = imx_clk_mux("usboh3_sel", MXC_CCM_CSCMR1, 22, 2,
- standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
- clk[IMX5_CLK_USBOH3_PRED] = imx_clk_divider("usboh3_pred", "usboh3_sel", MXC_CCM_CSCDR1, 8, 3);
- clk[IMX5_CLK_USBOH3_PODF] = imx_clk_divider("usboh3_podf", "usboh3_pred", MXC_CCM_CSCDR1, 6, 2);
- clk[IMX5_CLK_USB_PHY_PRED] = imx_clk_divider("usb_phy_pred", "pll3_sw", MXC_CCM_CDCDR, 3, 3);
- clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
- clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
- usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
- clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels));
- clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels));
- clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3);
- clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
- clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
- clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
- clk[IMX5_CLK_UART1_PER_GATE] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
- clk[IMX5_CLK_UART2_IPG_GATE] = imx_clk_gate2("uart2_ipg_gate", "ipg", MXC_CCM_CCGR1, 10);
- clk[IMX5_CLK_UART2_PER_GATE] = imx_clk_gate2("uart2_per_gate", "uart_root", MXC_CCM_CCGR1, 12);
- clk[IMX5_CLK_UART3_IPG_GATE] = imx_clk_gate2("uart3_ipg_gate", "ipg", MXC_CCM_CCGR1, 14);
- clk[IMX5_CLK_UART3_PER_GATE] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
- clk[IMX5_CLK_I2C1_GATE] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
- clk[IMX5_CLK_I2C2_GATE] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
- clk[IMX5_CLK_PWM1_IPG_GATE] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
- clk[IMX5_CLK_PWM1_HF_GATE] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12);
- clk[IMX5_CLK_PWM2_IPG_GATE] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
- clk[IMX5_CLK_PWM2_HF_GATE] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16);
- clk[IMX5_CLK_GPT_IPG_GATE] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18);
- clk[IMX5_CLK_GPT_HF_GATE] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20);
- clk[IMX5_CLK_FEC_GATE] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
- clk[IMX5_CLK_USBOH3_GATE] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
- clk[IMX5_CLK_USBOH3_PER_GATE] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
- clk[IMX5_CLK_ESDHC1_IPG_GATE] = imx_clk_gate2("esdhc1_ipg_gate", "ipg", MXC_CCM_CCGR3, 0);
- clk[IMX5_CLK_ESDHC2_IPG_GATE] = imx_clk_gate2("esdhc2_ipg_gate", "ipg", MXC_CCM_CCGR3, 4);
- clk[IMX5_CLK_ESDHC3_IPG_GATE] = imx_clk_gate2("esdhc3_ipg_gate", "ipg", MXC_CCM_CCGR3, 8);
- clk[IMX5_CLK_ESDHC4_IPG_GATE] = imx_clk_gate2("esdhc4_ipg_gate", "ipg", MXC_CCM_CCGR3, 12);
- clk[IMX5_CLK_SSI1_IPG_GATE] = imx_clk_gate2("ssi1_ipg_gate", "ipg", MXC_CCM_CCGR3, 16);
- clk[IMX5_CLK_SSI2_IPG_GATE] = imx_clk_gate2("ssi2_ipg_gate", "ipg", MXC_CCM_CCGR3, 20);
- clk[IMX5_CLK_SSI3_IPG_GATE] = imx_clk_gate2("ssi3_ipg_gate", "ipg", MXC_CCM_CCGR3, 24);
- clk[IMX5_CLK_ECSPI1_IPG_GATE] = imx_clk_gate2("ecspi1_ipg_gate", "ipg", MXC_CCM_CCGR4, 18);
- clk[IMX5_CLK_ECSPI1_PER_GATE] = imx_clk_gate2("ecspi1_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 20);
- clk[IMX5_CLK_ECSPI2_IPG_GATE] = imx_clk_gate2("ecspi2_ipg_gate", "ipg", MXC_CCM_CCGR4, 22);
- clk[IMX5_CLK_ECSPI2_PER_GATE] = imx_clk_gate2("ecspi2_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 24);
- clk[IMX5_CLK_CSPI_IPG_GATE] = imx_clk_gate2("cspi_ipg_gate", "ipg", MXC_CCM_CCGR4, 26);
- clk[IMX5_CLK_SDMA_GATE] = imx_clk_gate2("sdma_gate", "ipg", MXC_CCM_CCGR4, 30);
- clk[IMX5_CLK_EMI_FAST_GATE] = imx_clk_gate2("emi_fast_gate", "dummy", MXC_CCM_CCGR5, 14);
- clk[IMX5_CLK_EMI_SLOW_GATE] = imx_clk_gate2("emi_slow_gate", "emi_slow_podf", MXC_CCM_CCGR5, 16);
- clk[IMX5_CLK_IPU_SEL] = imx_clk_mux("ipu_sel", MXC_CCM_CBCMR, 6, 2, ipu_sel, ARRAY_SIZE(ipu_sel));
- clk[IMX5_CLK_IPU_GATE] = imx_clk_gate2("ipu_gate", "ipu_sel", MXC_CCM_CCGR5, 10);
- clk[IMX5_CLK_NFC_GATE] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
- clk[IMX5_CLK_IPU_DI0_GATE] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
- clk[IMX5_CLK_IPU_DI1_GATE] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
- clk[IMX5_CLK_GPU3D_SEL] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel));
- clk[IMX5_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel));
- clk[IMX5_CLK_GPU3D_GATE] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2);
- clk[IMX5_CLK_GARB_GATE] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4);
- clk[IMX5_CLK_GPU2D_GATE] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14);
- clk[IMX5_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
- clk[IMX5_CLK_VPU_GATE] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
- clk[IMX5_CLK_VPU_REFERENCE_GATE] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
- clk[IMX5_CLK_UART4_IPG_GATE] = imx_clk_gate2("uart4_ipg_gate", "ipg", MXC_CCM_CCGR7, 8);
- clk[IMX5_CLK_UART4_PER_GATE] = imx_clk_gate2("uart4_per_gate", "uart_root", MXC_CCM_CCGR7, 10);
- clk[IMX5_CLK_UART5_IPG_GATE] = imx_clk_gate2("uart5_ipg_gate", "ipg", MXC_CCM_CCGR7, 12);
- clk[IMX5_CLK_UART5_PER_GATE] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14);
- clk[IMX5_CLK_GPC_DVFS] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24);
-
- clk[IMX5_CLK_SSI_APM] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels));
- clk[IMX5_CLK_SSI1_ROOT_SEL] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
- clk[IMX5_CLK_SSI2_ROOT_SEL] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
- clk[IMX5_CLK_SSI3_ROOT_SEL] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels));
- clk[IMX5_CLK_SSI_EXT1_SEL] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
- clk[IMX5_CLK_SSI_EXT2_SEL] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
- clk[IMX5_CLK_SSI_EXT1_COM_SEL] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels));
- clk[IMX5_CLK_SSI_EXT2_COM_SEL] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels));
- clk[IMX5_CLK_SSI1_ROOT_PRED] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3);
- clk[IMX5_CLK_SSI1_ROOT_PODF] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6);
- clk[IMX5_CLK_SSI2_ROOT_PRED] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3);
- clk[IMX5_CLK_SSI2_ROOT_PODF] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6);
- clk[IMX5_CLK_SSI_EXT1_PRED] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3);
- clk[IMX5_CLK_SSI_EXT1_PODF] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6);
- clk[IMX5_CLK_SSI_EXT2_PRED] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3);
- clk[IMX5_CLK_SSI_EXT2_PODF] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6);
- clk[IMX5_CLK_SSI1_ROOT_GATE] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18);
- clk[IMX5_CLK_SSI2_ROOT_GATE] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22);
- clk[IMX5_CLK_SSI3_ROOT_GATE] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
- clk[IMX5_CLK_SSI_EXT1_GATE] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
- clk[IMX5_CLK_SSI_EXT2_GATE] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
- clk[IMX5_CLK_EPIT1_IPG_GATE] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2);
- clk[IMX5_CLK_EPIT1_HF_GATE] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
- clk[IMX5_CLK_EPIT2_IPG_GATE] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
- clk[IMX5_CLK_EPIT2_HF_GATE] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
- clk[IMX5_CLK_OWIRE_GATE] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
- clk[IMX5_CLK_SRTC_GATE] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
- clk[IMX5_CLK_PATA_GATE] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
- clk[IMX5_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", MXC_CCM_CSCMR2, 0, 2, spdif_sel, ARRAY_SIZE(spdif_sel));
- clk[IMX5_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", MXC_CCM_CDCDR, 25, 3);
- clk[IMX5_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", MXC_CCM_CDCDR, 19, 6);
- clk[IMX5_CLK_SPDIF0_COM_SEL] = imx_clk_mux_flags("spdif0_com_sel", MXC_CCM_CSCMR2, 4, 1,
- spdif0_com_sel, ARRAY_SIZE(spdif0_com_sel), CLK_SET_RATE_PARENT);
- clk[IMX5_CLK_SPDIF0_GATE] = imx_clk_gate2("spdif0_gate", "spdif0_com_sel", MXC_CCM_CCGR5, 26);
- clk[IMX5_CLK_SPDIF_IPG_GATE] = imx_clk_gate2("spdif_ipg_gate", "ipg", MXC_CCM_CCGR5, 30);
- clk[IMX5_CLK_SAHARA_IPG_GATE] = imx_clk_gate2("sahara_ipg_gate", "ipg", MXC_CCM_CCGR4, 14);
- clk[IMX5_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "usb_phy1_gate", 1, 1);
-
- clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0");
- clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL);
-
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
- clk_set_parent(clk[IMX5_CLK_ESDHC_B_SEL], clk[IMX5_CLK_PLL2_SW]);
-
- /* move usb phy clk to 24MHz */
- clk_set_parent(clk[IMX5_CLK_USB_PHY_SEL], clk[IMX5_CLK_OSC]);
-
- clk_prepare_enable(clk[IMX5_CLK_GPC_DVFS]);
- clk_prepare_enable(clk[IMX5_CLK_AHB_MAX]); /* esdhc3 */
- clk_prepare_enable(clk[IMX5_CLK_AIPS_TZ1]);
- clk_prepare_enable(clk[IMX5_CLK_AIPS_TZ2]); /* fec */
- clk_prepare_enable(clk[IMX5_CLK_SPBA]);
- clk_prepare_enable(clk[IMX5_CLK_EMI_FAST_GATE]); /* fec */
- clk_prepare_enable(clk[IMX5_CLK_EMI_SLOW_GATE]); /* eim */
- clk_prepare_enable(clk[IMX5_CLK_MIPI_HSC1_GATE]);
- clk_prepare_enable(clk[IMX5_CLK_MIPI_HSC2_GATE]);
- clk_prepare_enable(clk[IMX5_CLK_MIPI_ESC_GATE]);
- clk_prepare_enable(clk[IMX5_CLK_MIPI_HSP_GATE]);
- clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
- clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
- clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
-}
-
-static void __init mx50_clocks_init(struct device_node *np)
-{
- void __iomem *ccm_base;
- void __iomem *pll_base;
- unsigned long r;
-
- pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
-
- pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
-
- pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
-
- ccm_base = of_iomap(np, 0);
- WARN_ON(!ccm_base);
-
- mx5_clocks_common_init(ccm_base);
-
- clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
- lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
- clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
- clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
- clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
- clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
- clk[IMX5_CLK_USB_PHY1_GATE] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
- clk[IMX5_CLK_USB_PHY2_GATE] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
- clk[IMX5_CLK_I2C3_GATE] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
-
- clk[IMX5_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
- mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
- clk[IMX5_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
- clk[IMX5_CLK_CKO1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
-
- clk[IMX5_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
- mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
- clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
- clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- /* set SDHC root clock to 200MHZ*/
- clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
- clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
-
- clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
- imx_print_silicon_rev("i.MX50", IMX_CHIP_REVISION_1_1);
- clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
-
- r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
- clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-}
-CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
-
-static void __init mx51_clocks_init(struct device_node *np)
-{
- void __iomem *ccm_base;
- void __iomem *pll_base;
- u32 val;
-
- pll_base = ioremap(MX51_DPLL1_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
-
- pll_base = ioremap(MX51_DPLL2_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
-
- pll_base = ioremap(MX51_DPLL3_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
-
- ccm_base = of_iomap(np, 0);
- WARN_ON(!ccm_base);
-
- mx5_clocks_common_init(ccm_base);
-
- clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
- lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
- clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
- mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
- clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
- mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
- clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
- mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
- clk[IMX5_CLK_TVE_SEL] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
- mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
- clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
- clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
- clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
- clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6);
- clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10);
- clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
- clk[IMX5_CLK_USB_PHY_GATE] = imx_clk_gate2("usb_phy_gate", "usb_phy_sel", MXC_CCM_CCGR2, 0);
- clk[IMX5_CLK_HSI2C_GATE] = imx_clk_gate2("hsi2c_gate", "ipg", MXC_CCM_CCGR1, 22);
- clk[IMX5_CLK_MIPI_HSC1_GATE] = imx_clk_gate2("mipi_hsc1_gate", "ipg", MXC_CCM_CCGR4, 6);
- clk[IMX5_CLK_MIPI_HSC2_GATE] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8);
- clk[IMX5_CLK_MIPI_ESC_GATE] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
- clk[IMX5_CLK_MIPI_HSP_GATE] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
- clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
- mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
- clk[IMX5_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
- spdif_sel, ARRAY_SIZE(spdif_sel));
- clk[IMX5_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
- clk[IMX5_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
- clk[IMX5_CLK_SPDIF1_COM_SEL] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
- mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
- clk[IMX5_CLK_SPDIF1_GATE] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- /* set the usboh3 parent to pll2_sw */
- clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]);
-
- /* set SDHC root clock to 166.25MHZ*/
- clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000);
- clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000);
-
- clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
- imx_print_silicon_rev("i.MX51", mx51_revision());
- clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
-
- /*
- * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
- * longer supported. Set to one for better power saving.
- *
- * The effect of not setting these bits is that MIPI clocks can't be
- * enabled without the IPU clock being enabled aswell.
- */
- val = readl(MXC_CCM_CCDR);
- val |= 1 << 18;
- writel(val, MXC_CCM_CCDR);
-
- val = readl(MXC_CCM_CLPCR);
- val |= 1 << 23;
- writel(val, MXC_CCM_CLPCR);
-}
-CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
-
-static void __init mx53_clocks_init(struct device_node *np)
-{
- void __iomem *ccm_base;
- void __iomem *pll_base;
- unsigned long r;
-
- pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
-
- pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
-
- pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
-
- pll_base = ioremap(MX53_DPLL4_BASE, SZ_16K);
- WARN_ON(!pll_base);
- clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", pll_base);
-
- ccm_base = of_iomap(np, 0);
- WARN_ON(!ccm_base);
-
- mx5_clocks_common_init(ccm_base);
-
- clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
- lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
- clk[IMX5_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clk[IMX5_CLK_LDB_DI1_DIV] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0);
- clk[IMX5_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
- mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT);
- clk[IMX5_CLK_DI_PLL4_PODF] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
- clk[IMX5_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clk[IMX5_CLK_LDB_DI0_DIV] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0);
- clk[IMX5_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
- mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
- clk[IMX5_CLK_LDB_DI0_GATE] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
- clk[IMX5_CLK_LDB_DI1_GATE] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
- clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
- mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
- clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
- mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
- clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
- mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
- clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
- clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
- clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
- clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
- clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
- clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
- clk[IMX5_CLK_USB_PHY1_GATE] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
- clk[IMX5_CLK_USB_PHY2_GATE] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
- clk[IMX5_CLK_CAN_SEL] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2,
- mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
- clk[IMX5_CLK_CAN1_SERIAL_GATE] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
- clk[IMX5_CLK_CAN1_IPG_GATE] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
- clk[IMX5_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2);
- clk[IMX5_CLK_CAN2_SERIAL_GATE] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
- clk[IMX5_CLK_CAN2_IPG_GATE] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
- clk[IMX5_CLK_I2C3_GATE] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
- clk[IMX5_CLK_SATA_GATE] = imx_clk_gate2("sata_gate", "ipg", MXC_CCM_CCGR4, 2);
-
- clk[IMX5_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
- mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
- clk[IMX5_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
- clk[IMX5_CLK_CKO1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
-
- clk[IMX5_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
- mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
- clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
- clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
- clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
- mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
- clk[IMX5_CLK_ARM] = imx_clk_cpu("arm", "cpu_podf",
- clk[IMX5_CLK_CPU_PODF],
- clk[IMX5_CLK_CPU_PODF_SEL],
- clk[IMX5_CLK_PLL1_SW],
- clk[IMX5_CLK_STEP_SEL]);
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- /* set SDHC root clock to 200MHZ*/
- clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
- clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
-
- /* move can bus clk to 24MHz */
- clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]);
-
- /* make sure step clock is running from 24MHz */
- clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]);
-
- clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
- imx_print_silicon_rev("i.MX53", mx53_revision());
- clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
-
- r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
- clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-}
-CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
+++ /dev/null
-/*
- * Copyright 2011-2013 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
-static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
-static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
-static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
-static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
-static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
-static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
-static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
-static const char *gpu_axi_sels[] = { "axi", "ahb", };
-static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
-static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
-static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
-static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
-static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
-static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
-static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
-static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
-static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
-static const char *pcie_axi_sels[] = { "axi", "ahb", };
-static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
-static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
-static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *vdo_axi_sels[] = { "axi", "ahb", };
-static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
- "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
- "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
-static const char *cko2_sels[] = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
- "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
- "usdhc3", "dummy", "arm", "ipu1",
- "ipu2", "vdo_axi", "osc", "gpu2d_core",
- "gpu3d_core", "usdhc2", "ssi1", "ssi2",
- "ssi3", "gpu3d_shader", "vpu_axi", "can_root",
- "ldb_di0", "ldb_di1", "esai_extal", "eim_slow",
- "uart_serial", "spdif", "asrc", "hsi_tx",
-};
-static const char *cko_sels[] = { "cko1", "cko2", };
-static const char *lvds_sels[] = {
- "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
- "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
- "pcie_ref_125m", "sata_ref_100m",
-};
-static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
-static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
-static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
-static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
-static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
-static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
-static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
-static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
-
-static struct clk *clk[IMX6QDL_CLK_END];
-static struct clk_onecell_data clk_data;
-
-static unsigned int const clks_init_on[] __initconst = {
- IMX6QDL_CLK_MMDC_CH0_AXI,
- IMX6QDL_CLK_ROM,
- IMX6QDL_CLK_ARM,
-};
-
-static struct clk_div_table clk_enet_ref_table[] = {
- { .val = 0, .div = 20, },
- { .val = 1, .div = 10, },
- { .val = 2, .div = 5, },
- { .val = 3, .div = 4, },
- { /* sentinel */ }
-};
-
-static struct clk_div_table post_div_table[] = {
- { .val = 2, .div = 1, },
- { .val = 1, .div = 2, },
- { .val = 0, .div = 4, },
- { /* sentinel */ }
-};
-
-static struct clk_div_table video_div_table[] = {
- { .val = 0, .div = 1, },
- { .val = 1, .div = 2, },
- { .val = 2, .div = 1, },
- { .val = 3, .div = 4, },
- { /* sentinel */ }
-};
-
-static unsigned int share_count_esai;
-static unsigned int share_count_asrc;
-static unsigned int share_count_ssi1;
-static unsigned int share_count_ssi2;
-static unsigned int share_count_ssi3;
-static unsigned int share_count_mipi_core_cfg;
-
-static void __init imx6q_clocks_init(struct device_node *ccm_node)
-{
- struct device_node *np;
- void __iomem *base;
- int i;
- int ret;
-
- clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
- clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
- clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
- /* Clock source from external clock via CLK1/2 PADs */
- clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
- clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
- base = of_iomap(np, 0);
- WARN_ON(!base);
-
- /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
- if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
- post_div_table[1].div = 1;
- post_div_table[2].div = 1;
- video_div_table[1].div = 1;
- video_div_table[3].div = 1;
- }
-
- clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-
- /* type name parent_name base div_mask */
- clk[IMX6QDL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
- clk[IMX6QDL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
- clk[IMX6QDL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
- clk[IMX6QDL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
- clk[IMX6QDL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
- clk[IMX6QDL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
- clk[IMX6QDL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
-
- clk[IMX6QDL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
-
- /* Do not bypass PLLs initially */
- clk_set_parent(clk[IMX6QDL_PLL1_BYPASS], clk[IMX6QDL_CLK_PLL1]);
- clk_set_parent(clk[IMX6QDL_PLL2_BYPASS], clk[IMX6QDL_CLK_PLL2]);
- clk_set_parent(clk[IMX6QDL_PLL3_BYPASS], clk[IMX6QDL_CLK_PLL3]);
- clk_set_parent(clk[IMX6QDL_PLL4_BYPASS], clk[IMX6QDL_CLK_PLL4]);
- clk_set_parent(clk[IMX6QDL_PLL5_BYPASS], clk[IMX6QDL_CLK_PLL5]);
- clk_set_parent(clk[IMX6QDL_PLL6_BYPASS], clk[IMX6QDL_CLK_PLL6]);
- clk_set_parent(clk[IMX6QDL_PLL7_BYPASS], clk[IMX6QDL_CLK_PLL7]);
-
- clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
- clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
- clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
- clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
- clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
- clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
- clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
-
- /*
- * Bit 20 is the reserved and read-only bit, we do this only for:
- * - Do nothing for usbphy clk_enable/disable
- * - Keep refcount when do usbphy clk_enable/disable, in that case,
- * the clk framework may need to enable/disable usbphy's parent
- */
- clk[IMX6QDL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
- clk[IMX6QDL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
-
- /*
- * usbphy*_gate needs to be on after system boots up, and software
- * never needs to control it anymore.
- */
- clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
- clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
-
- clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
- clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
-
- clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
- clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
-
- clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
- base + 0xe0, 0, 2, 0, clk_enet_ref_table,
- &imx_ccm_lock);
-
- clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
- clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
-
- /*
- * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
- * independently configured as clock inputs or outputs. We treat
- * the "output_enable" bit as a gate, even though it's really just
- * enabling clock output.
- */
- clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12));
- clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13));
-
- clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
- clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11));
-
- /* name parent_name reg idx */
- clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
- clk[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
- clk[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
- clk[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
- clk[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
- clk[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
- clk[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
-
- /* name parent_name mult div */
- clk[IMX6QDL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
- clk[IMX6QDL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
- clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
- clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
- clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
- clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
- if (cpu_is_imx6dl()) {
- clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
- clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
- }
-
- clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
- clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
-
- np = ccm_node;
- base = of_iomap(np, 0);
- WARN_ON(!base);
-
- imx6q_pm_set_ccm_base(base);
-
- /* name reg shift width parent_names num_parents */
- clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
- clk[IMX6QDL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[IMX6QDL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[IMX6QDL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clk[IMX6QDL_CLK_AXI_SEL] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
- clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- if (cpu_is_imx6q()) {
- clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- }
- clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
- clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
- clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
- clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
- clk[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
- clk[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
- clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
- clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
- clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
- clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
- clk[IMX6QDL_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
- clk[IMX6QDL_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
-
- /* name reg shift width busy: reg, shift parent_names num_parents */
- clk[IMX6QDL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
- clk[IMX6QDL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
-
- /* name parent_name reg shift width */
- clk[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
- clk[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
- clk[IMX6QDL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
- clk[IMX6QDL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
- clk[IMX6QDL_CLK_ASRC_PRED] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
- clk[IMX6QDL_CLK_ASRC_PODF] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
- clk[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
- clk[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
- clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
- clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
- clk[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
- clk[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
- clk[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
- clk[IMX6QDL_CLK_IPU1_PODF] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
- clk[IMX6QDL_CLK_IPU2_PODF] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
- clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clk[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
- clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clk[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
- clk[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
- clk[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
- clk[IMX6QDL_CLK_IPU2_DI0_PRE] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
- clk[IMX6QDL_CLK_IPU2_DI1_PRE] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
- clk[IMX6QDL_CLK_HSI_TX_PODF] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
- clk[IMX6QDL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
- clk[IMX6QDL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
- clk[IMX6QDL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
- clk[IMX6QDL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
- clk[IMX6QDL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
- clk[IMX6QDL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
- clk[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
- clk[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
- clk[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
- clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
- clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
- clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
- clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
- clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
- clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
-
- /* name parent_name reg shift width busy: reg, shift */
- clk[IMX6QDL_CLK_AXI] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
- clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
- clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
- clk[IMX6QDL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
- clk[IMX6QDL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
-
- /* name parent_name reg shift */
- clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
- clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2_shared("asrc", "asrc_podf", base + 0x68, 6, &share_count_asrc);
- clk[IMX6QDL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
- clk[IMX6QDL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
- clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
- clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
- clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
- clk[IMX6QDL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
- clk[IMX6QDL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
- clk[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
- clk[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
- clk[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
- if (cpu_is_imx6dl())
- clk[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
- else
- clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
- clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
- clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
- clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
- clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
- clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
- if (cpu_is_imx6dl())
- /*
- * The multiplexer and divider of imx6q clock gpu3d_shader get
- * redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl.
- */
- clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
- else
- clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
- clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
- clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
- clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4);
- clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
- clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
- clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
- clk[IMX6QDL_CLK_IIM] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
- clk[IMX6QDL_CLK_ENFC] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
- clk[IMX6QDL_CLK_VDOA] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
- clk[IMX6QDL_CLK_IPU1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
- clk[IMX6QDL_CLK_IPU1_DI0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
- clk[IMX6QDL_CLK_IPU1_DI1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
- clk[IMX6QDL_CLK_IPU2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
- clk[IMX6QDL_CLK_IPU2_DI0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
- clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
- clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
- clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
- clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg);
- clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
- clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg);
- if (cpu_is_imx6dl())
- /*
- * The multiplexer and divider of the imx6q clock gpu2d get
- * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl.
- */
- clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
- else
- clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
- clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
- clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
- clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
- clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
- clk[IMX6QDL_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
- clk[IMX6QDL_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
- clk[IMX6QDL_CLK_PWM1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
- clk[IMX6QDL_CLK_PWM2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
- clk[IMX6QDL_CLK_PWM3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
- clk[IMX6QDL_CLK_PWM4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
- clk[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
- clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
- clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
- clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
- clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
- clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
- clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
- clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
- clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
- clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
- clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
- clk[IMX6QDL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
- clk[IMX6QDL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
- clk[IMX6QDL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
- clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
- clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
- clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
- clk[IMX6QDL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
- clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
- clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
- clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
- clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
- clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
- clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
- clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
-
- /*
- * The gpt_3m clock is not available on i.MX6Q TO1.0. Let's point it
- * to clock gpt_ipg_per to ease the gpt driver code.
- */
- if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0)
- clk[IMX6QDL_CLK_GPT_3M] = clk[IMX6QDL_CLK_GPT_IPG_PER];
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
-
- if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
- cpu_is_imx6dl()) {
- clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
- clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
- }
-
- clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
- clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
- clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
- clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
- clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_SEL], clk[IMX6QDL_CLK_IPU1_DI0_PRE]);
- clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_SEL], clk[IMX6QDL_CLK_IPU1_DI1_PRE]);
- clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_SEL], clk[IMX6QDL_CLK_IPU2_DI0_PRE]);
- clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_SEL], clk[IMX6QDL_CLK_IPU2_DI1_PRE]);
-
- /*
- * The gpmi needs 100MHz frequency in the EDO/Sync mode,
- * We can not get the 100MHz from the pll2_pfd0_352m.
- * So choose pll2_pfd2_396m as enfc_sel's parent.
- */
- clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);
-
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
- clk_prepare_enable(clk[clks_init_on[i]]);
-
- if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
- clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
- clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);
- }
-
- /*
- * Let's initially set up CLKO with OSC24M, since this configuration
- * is widely used by imx6q board designs to clock audio codec.
- */
- ret = clk_set_parent(clk[IMX6QDL_CLK_CKO2_SEL], clk[IMX6QDL_CLK_OSC]);
- if (!ret)
- ret = clk_set_parent(clk[IMX6QDL_CLK_CKO], clk[IMX6QDL_CLK_CKO2]);
- if (ret)
- pr_warn("failed to set up CLKO: %d\n", ret);
-
- /* Audio-related clocks configuration */
- clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
-
- /* All existing boards with PCIe use LVDS1 */
- if (IS_ENABLED(CONFIG_PCI_IMX6))
- clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
-
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
-}
-CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
+++ /dev/null
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <dt-bindings/clock/imx6sl-clock.h>
-
-#include "clk.h"
-#include "common.h"
-
-#define CCSR 0xc
-#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2)
-#define CACRR 0x10
-#define CDHIPR 0x48
-#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16)
-#define ARM_WAIT_DIV_396M 2
-#define ARM_WAIT_DIV_792M 4
-#define ARM_WAIT_DIV_996M 6
-
-#define PLL_ARM 0x0
-#define BM_PLL_ARM_DIV_SELECT (0x7f << 0)
-#define BM_PLL_ARM_POWERDOWN (1 << 12)
-#define BM_PLL_ARM_ENABLE (1 << 13)
-#define BM_PLL_ARM_LOCK (1 << 31)
-#define PLL_ARM_DIV_792M 66
-
-static const char *step_sels[] = { "osc", "pll2_pfd2", };
-static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
-static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", };
-static const char *ocram_sels[] = { "periph", "ocram_alt_sels", };
-static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
-static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
-static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
-static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", };
-static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", };
-static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
-static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", };
-static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", };
-static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
-static const char *perclk_sels[] = { "ipg", "osc", };
-static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", };
-static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", };
-static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
-static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
-static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
-static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
-static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
-static const char *ecspi_sels[] = { "pll3_60m", "osc", };
-static const char *uart_sels[] = { "pll3_80m", "osc", };
-static const char *lvds_sels[] = {
- "pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video",
- "dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1",
- "pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy",
- "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
-};
-static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
-static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
-static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
-static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
-static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
-static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
-static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
-static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
-
-static struct clk_div_table clk_enet_ref_table[] = {
- { .val = 0, .div = 20, },
- { .val = 1, .div = 10, },
- { .val = 2, .div = 5, },
- { .val = 3, .div = 4, },
- { }
-};
-
-static struct clk_div_table post_div_table[] = {
- { .val = 2, .div = 1, },
- { .val = 1, .div = 2, },
- { .val = 0, .div = 4, },
- { }
-};
-
-static struct clk_div_table video_div_table[] = {
- { .val = 0, .div = 1, },
- { .val = 1, .div = 2, },
- { .val = 2, .div = 1, },
- { .val = 3, .div = 4, },
- { }
-};
-
-static unsigned int share_count_ssi1;
-static unsigned int share_count_ssi2;
-static unsigned int share_count_ssi3;
-
-static struct clk *clks[IMX6SL_CLK_END];
-static struct clk_onecell_data clk_data;
-static void __iomem *ccm_base;
-static void __iomem *anatop_base;
-
-static const u32 clks_init_on[] __initconst = {
- IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
-};
-
-/*
- * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
- * during WAIT mode entry process could cause cache memory
- * corruption.
- *
- * Software workaround:
- * To prevent this issue from occurring, software should ensure that the
- * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
- * entering WAIT mode.
- *
- * This function will set the ARM clk to max value within the 12:5 limit.
- * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz),
- * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since
- * the clk APIs can NOT be called in idle thread(may cause kernel schedule
- * as there is sleep function in PLL wait function), so here we just slow
- * down ARM to below freq according to previous freq:
- *
- * run mode wait mode
- * 396MHz -> 132MHz;
- * 792MHz -> 158.4MHz;
- * 996MHz -> 142.3MHz;
- */
-static int imx6sl_get_arm_divider_for_wait(void)
-{
- if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) {
- return ARM_WAIT_DIV_396M;
- } else {
- if ((readl_relaxed(anatop_base + PLL_ARM) &
- BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M)
- return ARM_WAIT_DIV_792M;
- else
- return ARM_WAIT_DIV_996M;
- }
-}
-
-static void imx6sl_enable_pll_arm(bool enable)
-{
- static u32 saved_pll_arm;
- u32 val;
-
- if (enable) {
- saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM);
- val |= BM_PLL_ARM_ENABLE;
- val &= ~BM_PLL_ARM_POWERDOWN;
- writel_relaxed(val, anatop_base + PLL_ARM);
- while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
- ;
- } else {
- writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);
- }
-}
-
-void imx6sl_set_wait_clk(bool enter)
-{
- static unsigned long saved_arm_div;
- int arm_div_for_wait = imx6sl_get_arm_divider_for_wait();
-
- /*
- * According to hardware design, arm podf change need
- * PLL1 clock enabled.
- */
- if (arm_div_for_wait == ARM_WAIT_DIV_396M)
- imx6sl_enable_pll_arm(true);
-
- if (enter) {
- saved_arm_div = readl_relaxed(ccm_base + CACRR);
- writel_relaxed(arm_div_for_wait, ccm_base + CACRR);
- } else {
- writel_relaxed(saved_arm_div, ccm_base + CACRR);
- }
- while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY)
- ;
-
- if (arm_div_for_wait == ARM_WAIT_DIV_396M)
- imx6sl_enable_pll_arm(false);
-}
-
-static void __init imx6sl_clocks_init(struct device_node *ccm_node)
-{
- struct device_node *np;
- void __iomem *base;
- int i;
- int ret;
-
- clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
- clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
- /* Clock source from external clock via CLK1 PAD */
- clks[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- anatop_base = base;
-
- clks[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-
- /* type name parent_name base div_mask */
- clks[IMX6SL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
- clks[IMX6SL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
- clks[IMX6SL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
- clks[IMX6SL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
- clks[IMX6SL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
- clks[IMX6SL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
- clks[IMX6SL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
-
- clks[IMX6SL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
-
- /* Do not bypass PLLs initially */
- clk_set_parent(clks[IMX6SL_PLL1_BYPASS], clks[IMX6SL_CLK_PLL1]);
- clk_set_parent(clks[IMX6SL_PLL2_BYPASS], clks[IMX6SL_CLK_PLL2]);
- clk_set_parent(clks[IMX6SL_PLL3_BYPASS], clks[IMX6SL_CLK_PLL3]);
- clk_set_parent(clks[IMX6SL_PLL4_BYPASS], clks[IMX6SL_CLK_PLL4]);
- clk_set_parent(clks[IMX6SL_PLL5_BYPASS], clks[IMX6SL_CLK_PLL5]);
- clk_set_parent(clks[IMX6SL_PLL6_BYPASS], clks[IMX6SL_CLK_PLL6]);
- clk_set_parent(clks[IMX6SL_PLL7_BYPASS], clks[IMX6SL_CLK_PLL7]);
-
- clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
- clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
- clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
- clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
- clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
- clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
- clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
-
- clks[IMX6SL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
- clks[IMX6SL_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
- clks[IMX6SL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
-
- /*
- * usbphy1 and usbphy2 are implemented as dummy gates using reserve
- * bit 20. They are used by phy driver to keep the refcount of
- * parent PLL correct. usbphy1_gate and usbphy2_gate only needs to be
- * turned on during boot, and software will not need to control it
- * anymore after that.
- */
- clks[IMX6SL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
- clks[IMX6SL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
- clks[IMX6SL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
- clks[IMX6SL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
-
- /* dev name parent_name flags reg shift width div: flags, div_table lock */
- clks[IMX6SL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clks[IMX6SL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
- clks[IMX6SL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clks[IMX6SL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
- clks[IMX6SL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
-
- /* name parent_name reg idx */
- clks[IMX6SL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0", "pll2_bus", base + 0x100, 0);
- clks[IMX6SL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", base + 0x100, 1);
- clks[IMX6SL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", base + 0x100, 2);
- clks[IMX6SL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0", "pll3_usb_otg", base + 0xf0, 0);
- clks[IMX6SL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", base + 0xf0, 1);
- clks[IMX6SL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", base + 0xf0, 2);
- clks[IMX6SL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", base + 0xf0, 3);
-
- /* name parent_name mult div */
- clks[IMX6SL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2", 1, 2);
- clks[IMX6SL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
- clks[IMX6SL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clks[IMX6SL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
-
- np = ccm_node;
- base = of_iomap(np, 0);
- WARN_ON(!base);
- ccm_base = base;
-
- /* Reuse imx6q pm code */
- imx6q_pm_set_ccm_base(base);
-
- /* name reg shift width parent_names num_parents */
- clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
- clks[IMX6SL_CLK_OCRAM_ALT_SEL] = imx_clk_mux("ocram_alt_sel", base + 0x14, 7, 1, ocram_alt_sels, ARRAY_SIZE(ocram_alt_sels));
- clks[IMX6SL_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 1, ocram_sels, ARRAY_SIZE(ocram_sels));
- clks[IMX6SL_CLK_PRE_PERIPH2_SEL] = imx_clk_mux("pre_periph2_sel", base + 0x18, 21, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
- clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
- clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
- clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels));
- clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
- clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels));
- clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels));
- clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels));
- clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels));
- clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels));
- clks[IMX6SL_CLK_EPDC_PIX_SEL] = imx_clk_mux("epdc_pix_sel", base + 0x38, 15, 3, epdc_pix_sels, ARRAY_SIZE(epdc_pix_sels));
- clks[IMX6SL_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clks[IMX6SL_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clks[IMX6SL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clks[IMX6SL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
- clks[IMX6SL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
-
- /* name reg shift width busy: reg, shift parent_names num_parents */
- clks[IMX6SL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
- clks[IMX6SL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
-
- /* name parent_name reg shift width */
- clks[IMX6SL_CLK_OCRAM_PODF] = imx_clk_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3);
- clks[IMX6SL_CLK_PERIPH_CLK2_PODF] = imx_clk_divider("periph_clk2_podf", "periph_clk2_sel", base + 0x14, 27, 3);
- clks[IMX6SL_CLK_PERIPH2_CLK2_PODF] = imx_clk_divider("periph2_clk2_podf", "periph2_clk2_sel", base + 0x14, 0, 3);
- clks[IMX6SL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clks[IMX6SL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
- clks[IMX6SL_CLK_LCDIF_AXI_PODF] = imx_clk_divider("lcdif_axi_podf", "lcdif_axi_sel", base + 0x3c, 16, 3);
- clks[IMX6SL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
- clks[IMX6SL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
- clks[IMX6SL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
- clks[IMX6SL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
- clks[IMX6SL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
- clks[IMX6SL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
- clks[IMX6SL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
- clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
- clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
- clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clks[IMX6SL_CLK_PERCLK] = imx_clk_fixup_divider("perclk", "perclk_sel", base + 0x1c, 0, 6, imx_cscmr1_fixup);
- clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3);
- clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3);
- clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3);
- clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3);
- clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3);
- clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3);
- clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
- clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3);
- clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3);
- clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3);
- clks[IMX6SL_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", base + 0x30, 12, 3);
- clks[IMX6SL_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", base + 0x30, 9, 3);
- clks[IMX6SL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x28, 9, 3);
- clks[IMX6SL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x28, 25, 3);
- clks[IMX6SL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6);
- clks[IMX6SL_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_sel", base + 0x24, 0, 6);
-
- /* name parent_name reg shift width busy: reg, shift */
- clks[IMX6SL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
- clks[IMX6SL_CLK_MMDC_ROOT] = imx_clk_busy_divider("mmdc", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
- clks[IMX6SL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
-
- /* name parent_name reg shift */
- clks[IMX6SL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
- clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
- clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
- clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
- clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
- clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
- clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16);
- clks[IMX6SL_CLK_GPT] = imx_clk_gate2("gpt", "perclk", base + 0x6c, 20);
- clks[IMX6SL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
- clks[IMX6SL_CLK_GPU2D_OVG] = imx_clk_gate2("gpu2d_ovg", "gpu2d_ovg_podf", base + 0x6c, 26);
- clks[IMX6SL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
- clks[IMX6SL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
- clks[IMX6SL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
- clks[IMX6SL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
- clks[IMX6SL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x74, 0);
- clks[IMX6SL_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "pxp_axi_podf", base + 0x74, 2);
- clks[IMX6SL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_axi", "epdc_axi_podf", base + 0x74, 4);
- clks[IMX6SL_CLK_LCDIF_AXI] = imx_clk_gate2("lcdif_axi", "lcdif_axi_podf", base + 0x74, 6);
- clks[IMX6SL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_pix_podf", base + 0x74, 8);
- clks[IMX6SL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_pix_podf", base + 0x74, 10);
- clks[IMX6SL_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
- clks[IMX6SL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
- clks[IMX6SL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
- clks[IMX6SL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
- clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
- clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6);
- clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14);
- clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
- clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
- clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
- clks[IMX6SL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
- clks[IMX6SL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
- clks[IMX6SL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
- clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24);
- clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26);
- clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
- clks[IMX6SL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
- clks[IMX6SL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
- clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
- clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
-
- imx_check_clocks(clks, ARRAY_SIZE(clks));
-
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- /* Ensure the AHB clk is at 132MHz. */
- ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
- if (ret)
- pr_warn("%s: failed to set AHB clock rate %d!\n",
- __func__, ret);
-
- /*
- * Make sure those always on clocks are enabled to maintain the correct
- * usecount and enabling/disabling of parent PLLs.
- */
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
- clk_prepare_enable(clks[clks_init_on[i]]);
-
- if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
- clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
- clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
- }
-
- /* Audio-related clocks configuration */
- clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
-
- /* set PLL5 video as lcdif pix parent clock */
- clk_set_parent(clks[IMX6SL_CLK_LCDIF_PIX_SEL],
- clks[IMX6SL_CLK_PLL5_VIDEO_DIV]);
-
- clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
- clks[IMX6SL_CLK_PLL2_PFD2]);
-
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
-}
-CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
+++ /dev/null
-/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/clock/imx6sx-clock.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/types.h>
-
-#include "clk.h"
-#include "common.h"
-
-#define CCDR 0x4
-#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16)
-
-static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
-static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
-static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
-static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", };
-static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
-static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
-static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
-static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
-static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
-static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", };
-static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", };
-static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
-static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
-static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
-static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
-static const char *pcie_axi_sels[] = { "axi", "ahb", };
-static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", };
-static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
-static const char *perclk_sels[] = { "ipg", "osc", };
-static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", };
-static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", };
-static const char *uart_sels[] = { "pll3_80m", "osc", };
-static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", };
-static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
-static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
-static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", };
-static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
-static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *ecspi_sels[] = { "pll3_60m", "osc", };
-static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
-static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
-static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", };
-static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
-static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", };
-static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *cko1_sels[] = {
- "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
- "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix",
- "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div",
-};
-static const char *cko2_sels[] = {
- "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck",
- "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core",
- "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core",
- "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy",
- "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial",
- "spdif", "asrc", "dummy",
-};
-static const char *cko_sels[] = { "cko1", "cko2", };
-static const char *lvds_sels[] = {
- "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div",
- "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2",
-};
-static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
-static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
-static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
-static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
-static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
-static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
-static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
-static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
-
-static struct clk *clks[IMX6SX_CLK_CLK_END];
-static struct clk_onecell_data clk_data;
-
-static int const clks_init_on[] __initconst = {
- IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
- IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
- IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
- IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
- IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4,
- IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG,
- IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5,
- IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG,
- IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1,
- IMX6SX_CLK_EPIT2,
-};
-
-static struct clk_div_table clk_enet_ref_table[] = {
- { .val = 0, .div = 20, },
- { .val = 1, .div = 10, },
- { .val = 2, .div = 5, },
- { .val = 3, .div = 4, },
- { }
-};
-
-static struct clk_div_table post_div_table[] = {
- { .val = 2, .div = 1, },
- { .val = 1, .div = 2, },
- { .val = 0, .div = 4, },
- { }
-};
-
-static struct clk_div_table video_div_table[] = {
- { .val = 0, .div = 1, },
- { .val = 1, .div = 2, },
- { .val = 2, .div = 1, },
- { .val = 3, .div = 4, },
- { }
-};
-
-static u32 share_count_asrc;
-static u32 share_count_audio;
-static u32 share_count_esai;
-static u32 share_count_ssi1;
-static u32 share_count_ssi2;
-static u32 share_count_ssi3;
-
-static void __init imx6sx_clocks_init(struct device_node *ccm_node)
-{
- struct device_node *np;
- void __iomem *base;
- int i;
-
- clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
-
- clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
- clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
-
- /* ipp_di clock is external input */
- clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
- clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
-
- /* Clock source from external clock via CLK1 PAD */
- clks[IMX6SX_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
- base = of_iomap(np, 0);
- WARN_ON(!base);
-
- clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SX_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SX_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SX_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SX_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clks[IMX6SX_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-
- /* type name parent_name base div_mask */
- clks[IMX6SX_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
- clks[IMX6SX_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
- clks[IMX6SX_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
- clks[IMX6SX_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
- clks[IMX6SX_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
- clks[IMX6SX_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
- clks[IMX6SX_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
-
- clks[IMX6SX_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
-
- /* Do not bypass PLLs initially */
- clk_set_parent(clks[IMX6SX_PLL1_BYPASS], clks[IMX6SX_CLK_PLL1]);
- clk_set_parent(clks[IMX6SX_PLL2_BYPASS], clks[IMX6SX_CLK_PLL2]);
- clk_set_parent(clks[IMX6SX_PLL3_BYPASS], clks[IMX6SX_CLK_PLL3]);
- clk_set_parent(clks[IMX6SX_PLL4_BYPASS], clks[IMX6SX_CLK_PLL4]);
- clk_set_parent(clks[IMX6SX_PLL5_BYPASS], clks[IMX6SX_CLK_PLL5]);
- clk_set_parent(clks[IMX6SX_PLL6_BYPASS], clks[IMX6SX_CLK_PLL6]);
- clk_set_parent(clks[IMX6SX_PLL7_BYPASS], clks[IMX6SX_CLK_PLL7]);
-
- clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
- clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
- clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
- clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
- clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
- clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
- clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
-
- /*
- * Bit 20 is the reserved and read-only bit, we do this only for:
- * - Do nothing for usbphy clk_enable/disable
- * - Keep refcount when do usbphy clk_enable/disable, in that case,
- * the clk framework may need to enable/disable usbphy's parent
- */
- clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
- clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
-
- /*
- * usbphy*_gate needs to be on after system boots up, and software
- * never needs to control it anymore.
- */
- clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
- clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
-
- /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */
- clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
- clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
-
- clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
- clks[IMX6SX_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
-
- clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
- base + 0xe0, 0, 2, 0, clk_enet_ref_table,
- &imx_ccm_lock);
- clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
- base + 0xe0, 2, 2, 0, clk_enet_ref_table,
- &imx_ccm_lock);
- clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
-
- clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
- clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21);
-
- /* name parent_name reg idx */
- clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
- clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
- clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
- clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3);
- clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
- clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
- clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
- clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
-
- /* name parent_name mult div */
- clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
- clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
- clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
- clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
- clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
-
- clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
- CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
- CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
- clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video",
- CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
- CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
-
- /* name reg shift width parent_names num_parents */
- clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
-
- np = ccm_node;
- base = of_iomap(np, 0);
- WARN_ON(!base);
-
- imx6q_pm_set_ccm_base(base);
-
- /* name reg shift width parent_names num_parents */
- clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
- clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels));
- clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
- clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
- clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels));
- clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
- clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
- clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
- clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
- clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels));
- clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
- clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
- clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels));
- clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels));
- clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels));
- clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels));
- clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
- clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels));
- clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels));
- clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels));
- clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
- clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
- clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
- clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
-
- clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT);
- clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT);
-
- /* name parent_name reg shift width */
- clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
- clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
- clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3);
- clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3);
- clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3);
- clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
- clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
- clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3);
- clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
- clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2);
- clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
- clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
- clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
- clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
- clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
- clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6);
- clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
- clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
- clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
- clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
- clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
- clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3);
- clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6);
- clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
- clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
- clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
- clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
- clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3);
- clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3);
- clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3);
- clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3);
- clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6);
- clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3);
- clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3);
- clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3);
- clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
- clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
- clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
-
- clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7);
- clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7);
-
- /* name reg shift width busy: reg, shift parent_names num_parents */
- clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
- clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
- /* name parent_name reg shift width busy: reg, shift */
- clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0);
- clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
- clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
- clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
-
- /* name parent_name reg shift */
- /* CCGR0 */
- clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
- clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
- clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
- clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
- clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
- clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8);
- clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
- clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
- clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
- clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
- clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
- clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
- clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24);
- clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26);
- clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
-
- /* CCGR1 */
- clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
- clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2);
- clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4);
- clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6);
- clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8);
- clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
- clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
- clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
- clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
- clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
- clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18);
- clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20);
- clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
- clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26);
- clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30);
-
- /* CCGR2 */
- clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
- clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
- clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
- clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
- clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
- clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14);
- clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16);
- clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18);
- clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20);
- clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22);
- clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28);
- clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30);
-
- /* CCGR3 */
- clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2);
- clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4);
- clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4);
- clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6);
- clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8);
- clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10);
- clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12);
- clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
- clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18);
- clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
- clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24);
- clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
-
- /* CCGR4 */
- clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0);
- clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10);
- clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
- clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14);
- clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
- clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
- clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
- clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
- clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
- clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
- clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28);
- clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
-
- /* CCGR5 */
- clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
- clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
- clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
- clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
- clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
- clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
- clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
- clks[IMX6SX_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
- clks[IMX6SX_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
- clks[IMX6SX_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
- clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
- clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
- clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
- clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30);
- clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28);
- clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30);
-
- /* CCGR6 */
- clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
- clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
- clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
- clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
- clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
- clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16);
- clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20);
- clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22);
- clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
- clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26);
- clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28);
- clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30);
-
- clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
- clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
-
- /* mask handshake of mmdc */
- writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
-
- imx_check_clocks(clks, ARRAY_SIZE(clks));
-
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
- clk_prepare_enable(clks[clks_init_on[i]]);
-
- if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
- clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
- clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);
- }
-
- /* Set the default 132MHz for EIM module */
- clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
- clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000);
-
- /* set parent clock for LCDIF1 pixel clock */
- clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]);
- clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]);
-
- /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
- if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M]))
- pr_err("Failed to set pcie bus parent clk.\n");
- if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI]))
- pr_err("Failed to set pcie parent clk.\n");
-
- /*
- * Init enet system AHB clock, set to 200Mhz
- * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
- */
- clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
- clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]);
- clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000);
- clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000);
- clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000);
-
- /* Audio clocks */
- clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000);
-
- clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
- clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000);
-
- clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
- clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000);
-
- clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
- clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
- clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
- clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000);
- clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000);
- clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000);
-
- clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
- clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000);
-
- /* Set parent clock for vadc */
- clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
-
- /* default parent of can_sel clock is invalid, manually set it here */
- clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]);
-
- /* Update gpu clock from default 528M to 720M */
- clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
- clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
-
- clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
- clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
-
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
-}
-CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
+++ /dev/null
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2012 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include "clk.h"
-
-/**
- * struct clk_pfd - IMX PFD clock
- * @clk_hw: clock source
- * @reg: PFD register address
- * @idx: the index of PFD encoded in the register
- *
- * PFD clock found on i.MX6 series. Each register for PFD has 4 clk_pfd
- * data encoded, and member idx is used to specify the one. And each
- * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
- */
-struct clk_pfd {
- struct clk_hw hw;
- void __iomem *reg;
- u8 idx;
-};
-
-#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
-
-#define SET 0x4
-#define CLR 0x8
-#define OTG 0xc
-
-static int clk_pfd_enable(struct clk_hw *hw)
-{
- struct clk_pfd *pfd = to_clk_pfd(hw);
-
- writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
-
- return 0;
-}
-
-static void clk_pfd_disable(struct clk_hw *hw)
-{
- struct clk_pfd *pfd = to_clk_pfd(hw);
-
- writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
-}
-
-static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_pfd *pfd = to_clk_pfd(hw);
- u64 tmp = parent_rate;
- u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
-
- tmp *= 18;
- do_div(tmp, frac);
-
- return tmp;
-}
-
-static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- u64 tmp = *prate;
- u8 frac;
-
- tmp = tmp * 18 + rate / 2;
- do_div(tmp, rate);
- frac = tmp;
- if (frac < 12)
- frac = 12;
- else if (frac > 35)
- frac = 35;
- tmp = *prate;
- tmp *= 18;
- do_div(tmp, frac);
-
- return tmp;
-}
-
-static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_pfd *pfd = to_clk_pfd(hw);
- u64 tmp = parent_rate;
- u8 frac;
-
- tmp = tmp * 18 + rate / 2;
- do_div(tmp, rate);
- frac = tmp;
- if (frac < 12)
- frac = 12;
- else if (frac > 35)
- frac = 35;
-
- writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
- writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
-
- return 0;
-}
-
-static int clk_pfd_is_enabled(struct clk_hw *hw)
-{
- struct clk_pfd *pfd = to_clk_pfd(hw);
-
- if (readl_relaxed(pfd->reg) & (1 << ((pfd->idx + 1) * 8 - 1)))
- return 0;
-
- return 1;
-}
-
-static const struct clk_ops clk_pfd_ops = {
- .enable = clk_pfd_enable,
- .disable = clk_pfd_disable,
- .recalc_rate = clk_pfd_recalc_rate,
- .round_rate = clk_pfd_round_rate,
- .set_rate = clk_pfd_set_rate,
- .is_enabled = clk_pfd_is_enabled,
-};
-
-struct clk *imx_clk_pfd(const char *name, const char *parent_name,
- void __iomem *reg, u8 idx)
-{
- struct clk_pfd *pfd;
- struct clk *clk;
- struct clk_init_data init;
-
- pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
- if (!pfd)
- return ERR_PTR(-ENOMEM);
-
- pfd->reg = reg;
- pfd->idx = idx;
-
- init.name = name;
- init.ops = &clk_pfd_ops;
- init.flags = 0;
- init.parent_names = &parent_name;
- init.num_parents = 1;
-
- pfd->hw.init = &init;
-
- clk = clk_register(NULL, &pfd->hw);
- if (IS_ERR(clk))
- kfree(pfd);
-
- return clk;
-}
+++ /dev/null
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-
-#include "clk.h"
-#include "common.h"
-#include "hardware.h"
-
-/**
- * pll v1
- *
- * @clk_hw clock source
- * @parent the parent clock name
- * @base base address of pll registers
- *
- * PLL clock version 1, found on i.MX1/21/25/27/31/35
- */
-
-#define MFN_BITS (10)
-#define MFN_SIGN (BIT(MFN_BITS - 1))
-#define MFN_MASK (MFN_SIGN - 1)
-
-struct clk_pllv1 {
- struct clk_hw hw;
- void __iomem *base;
-};
-
-#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk))
-
-static inline bool mfn_is_negative(unsigned int mfn)
-{
- return !cpu_is_mx1() && !cpu_is_mx21() && (mfn & MFN_SIGN);
-}
-
-static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_pllv1 *pll = to_clk_pllv1(hw);
- long long ll;
- int mfn_abs;
- unsigned int mfi, mfn, mfd, pd;
- u32 reg;
- unsigned long rate;
-
- reg = readl(pll->base);
-
- /*
- * Get the resulting clock rate from a PLL register value and the input
- * frequency. PLLs with this register layout can be found on i.MX1,
- * i.MX21, i.MX27 and i,MX31
- *
- * mfi + mfn / (mfd + 1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-
- mfi = (reg >> 10) & 0xf;
- mfn = reg & 0x3ff;
- mfd = (reg >> 16) & 0x3ff;
- pd = (reg >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- mfn_abs = mfn;
-
- /*
- * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
- * 2's complements number.
- * On i.MX27 the bit 9 is the sign bit.
- */
- if (mfn_is_negative(mfn)) {
- if (cpu_is_mx27())
- mfn_abs = mfn & MFN_MASK;
- else
- mfn_abs = BIT(MFN_BITS) - mfn;
- }
-
- rate = parent_rate * 2;
- rate /= pd + 1;
-
- ll = (unsigned long long)rate * mfn_abs;
-
- do_div(ll, mfd + 1);
-
- if (mfn_is_negative(mfn))
- ll = -ll;
-
- ll = (rate * mfi) + ll;
-
- return ll;
-}
-
-static struct clk_ops clk_pllv1_ops = {
- .recalc_rate = clk_pllv1_recalc_rate,
-};
-
-struct clk *imx_clk_pllv1(const char *name, const char *parent,
- void __iomem *base)
-{
- struct clk_pllv1 *pll;
- struct clk *clk;
- struct clk_init_data init;
-
- pll = kmalloc(sizeof(*pll), GFP_KERNEL);
- if (!pll)
- return ERR_PTR(-ENOMEM);
-
- pll->base = base;
-
- init.name = name;
- init.ops = &clk_pllv1_ops;
- init.flags = 0;
- init.parent_names = &parent;
- init.num_parents = 1;
-
- pll->hw.init = &init;
-
- clk = clk_register(NULL, &pll->hw);
- if (IS_ERR(clk))
- kfree(pll);
-
- return clk;
-}
+++ /dev/null
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-
-#include <asm/div64.h>
-
-#include "clk.h"
-
-#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk))
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL 0x00
-#define MXC_PLL_DP_CONFIG 0x04
-#define MXC_PLL_DP_OP 0x08
-#define MXC_PLL_DP_MFD 0x0C
-#define MXC_PLL_DP_MFN 0x10
-#define MXC_PLL_DP_MFNMINUS 0x14
-#define MXC_PLL_DP_MFNPLUS 0x18
-#define MXC_PLL_DP_HFS_OP 0x1C
-#define MXC_PLL_DP_HFS_MFD 0x20
-#define MXC_PLL_DP_HFS_MFN 0x24
-#define MXC_PLL_DP_MFN_TOGC 0x28
-#define MXC_PLL_DP_DESTAT 0x2c
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
-#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
-#define MXC_PLL_DP_CTL_ADE 0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
-#define MXC_PLL_DP_CTL_HFSM 0x80
-#define MXC_PLL_DP_CTL_PRE 0x40
-#define MXC_PLL_DP_CTL_UPEN 0x20
-#define MXC_PLL_DP_CTL_RST 0x10
-#define MXC_PLL_DP_CTL_RCP 0x8
-#define MXC_PLL_DP_CTL_PLM 0x4
-#define MXC_PLL_DP_CTL_BRM0 0x2
-#define MXC_PLL_DP_CTL_LRF 0x1
-
-#define MXC_PLL_DP_CONFIG_BIST 0x8
-#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
-#define MXC_PLL_DP_CONFIG_AREN 0x2
-#define MXC_PLL_DP_CONFIG_LDREQ 0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET 4
-#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
-#define MXC_PLL_DP_OP_PDF_OFFSET 0
-#define MXC_PLL_DP_OP_PDF_MASK 0xF
-
-#define MXC_PLL_DP_MFD_OFFSET 0
-#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET 0x0
-#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
-#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
-#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
-#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
-
-#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
-#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
-
-#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
-
-struct clk_pllv2 {
- struct clk_hw hw;
- void __iomem *base;
-};
-
-static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
- u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
-{
- long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dbl;
- s64 temp;
-
- dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
-
- pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
- mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
- /* Sign extend to 32-bits */
- if (mfn >= 0x04000000) {
- mfn |= 0xFC000000;
- mfn_abs = -mfn;
- }
-
- ref_clk = 2 * parent_rate;
- if (dbl != 0)
- ref_clk *= 2;
-
- ref_clk /= (pdf + 1);
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd + 1);
- if (mfn < 0)
- temp = -temp;
- temp = (ref_clk * mfi) + temp;
-
- return temp;
-}
-
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
- void __iomem *pllbase;
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
-
- pllbase = pll->base;
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-
- return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
-}
-
-static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
- u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
-{
- u32 reg;
- long mfi, pdf, mfn, mfd = 999999;
- s64 temp64;
- unsigned long quad_parent_rate;
-
- quad_parent_rate = 4 * parent_rate;
- pdf = mfi = -1;
- while (++pdf < 16 && mfi < 5)
- mfi = rate * (pdf+1) / quad_parent_rate;
- if (mfi > 15)
- return -EINVAL;
- pdf--;
-
- temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate / 1000000);
- mfn = (long)temp64;
-
- reg = mfi << 4 | pdf;
-
- *dp_op = reg;
- *dp_mfd = mfd;
- *dp_mfn = mfn;
-
- return 0;
-}
-
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
- void __iomem *pllbase;
- u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
- int ret;
-
- pllbase = pll->base;
-
-
- ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
- if (ret)
- return ret;
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- /* use dpdck0_2 */
- __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
-
- __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
- __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
-
- return 0;
-}
-
-static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- u32 dp_op, dp_mfd, dp_mfn;
-
- __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
- return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
- dp_op, dp_mfd, dp_mfn);
-}
-
-static int clk_pllv2_prepare(struct clk_hw *hw)
-{
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
- u32 reg;
- void __iomem *pllbase;
- int i = 0;
-
- pllbase = pll->base;
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- if (reg & MXC_PLL_DP_CTL_LRF)
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: pll locking failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void clk_pllv2_unprepare(struct clk_hw *hw)
-{
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
- u32 reg;
- void __iomem *pllbase;
-
- pllbase = pll->base;
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-}
-
-static struct clk_ops clk_pllv2_ops = {
- .prepare = clk_pllv2_prepare,
- .unprepare = clk_pllv2_unprepare,
- .recalc_rate = clk_pllv2_recalc_rate,
- .round_rate = clk_pllv2_round_rate,
- .set_rate = clk_pllv2_set_rate,
-};
-
-struct clk *imx_clk_pllv2(const char *name, const char *parent,
- void __iomem *base)
-{
- struct clk_pllv2 *pll;
- struct clk *clk;
- struct clk_init_data init;
-
- pll = kzalloc(sizeof(*pll), GFP_KERNEL);
- if (!pll)
- return ERR_PTR(-ENOMEM);
-
- pll->base = base;
-
- init.name = name;
- init.ops = &clk_pllv2_ops;
- init.flags = 0;
- init.parent_names = &parent;
- init.num_parents = 1;
-
- pll->hw.init = &init;
-
- clk = clk_register(NULL, &pll->hw);
- if (IS_ERR(clk))
- kfree(pll);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2012 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/err.h>
-#include "clk.h"
-
-#define PLL_NUM_OFFSET 0x10
-#define PLL_DENOM_OFFSET 0x20
-
-#define BM_PLL_POWER (0x1 << 12)
-#define BM_PLL_LOCK (0x1 << 31)
-
-/**
- * struct clk_pllv3 - IMX PLL clock version 3
- * @clk_hw: clock source
- * @base: base address of PLL registers
- * @powerup_set: set POWER bit to power up the PLL
- * @div_mask: mask of divider bits
- * @div_shift: shift of divider bits
- *
- * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3
- * is actually a multiplier, and always sits at bit 0.
- */
-struct clk_pllv3 {
- struct clk_hw hw;
- void __iomem *base;
- bool powerup_set;
- u32 div_mask;
- u32 div_shift;
-};
-
-#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
-
-static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(10);
- u32 val = readl_relaxed(pll->base) & BM_PLL_POWER;
-
- /* No need to wait for lock when pll is not powered up */
- if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
- return 0;
-
- /* Wait for PLL to lock */
- do {
- if (readl_relaxed(pll->base) & BM_PLL_LOCK)
- break;
- if (time_after(jiffies, timeout))
- break;
- usleep_range(50, 500);
- } while (1);
-
- return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
-}
-
-static int clk_pllv3_prepare(struct clk_hw *hw)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 val;
-
- val = readl_relaxed(pll->base);
- if (pll->powerup_set)
- val |= BM_PLL_POWER;
- else
- val &= ~BM_PLL_POWER;
- writel_relaxed(val, pll->base);
-
- return clk_pllv3_wait_lock(pll);
-}
-
-static void clk_pllv3_unprepare(struct clk_hw *hw)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 val;
-
- val = readl_relaxed(pll->base);
- if (pll->powerup_set)
- val &= ~BM_PLL_POWER;
- else
- val |= BM_PLL_POWER;
- writel_relaxed(val, pll->base);
-}
-
-static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
-
- return (div == 1) ? parent_rate * 22 : parent_rate * 20;
-}
-
-static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- unsigned long parent_rate = *prate;
-
- return (rate >= parent_rate * 22) ? parent_rate * 22 :
- parent_rate * 20;
-}
-
-static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 val, div;
-
- if (rate == parent_rate * 22)
- div = 1;
- else if (rate == parent_rate * 20)
- div = 0;
- else
- return -EINVAL;
-
- val = readl_relaxed(pll->base);
- val &= ~(pll->div_mask << pll->div_shift);
- val |= (div << pll->div_shift);
- writel_relaxed(val, pll->base);
-
- return clk_pllv3_wait_lock(pll);
-}
-
-static const struct clk_ops clk_pllv3_ops = {
- .prepare = clk_pllv3_prepare,
- .unprepare = clk_pllv3_unprepare,
- .recalc_rate = clk_pllv3_recalc_rate,
- .round_rate = clk_pllv3_round_rate,
- .set_rate = clk_pllv3_set_rate,
-};
-
-static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 div = readl_relaxed(pll->base) & pll->div_mask;
-
- return parent_rate * div / 2;
-}
-
-static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- unsigned long parent_rate = *prate;
- unsigned long min_rate = parent_rate * 54 / 2;
- unsigned long max_rate = parent_rate * 108 / 2;
- u32 div;
-
- if (rate > max_rate)
- rate = max_rate;
- else if (rate < min_rate)
- rate = min_rate;
- div = rate * 2 / parent_rate;
-
- return parent_rate * div / 2;
-}
-
-static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- unsigned long min_rate = parent_rate * 54 / 2;
- unsigned long max_rate = parent_rate * 108 / 2;
- u32 val, div;
-
- if (rate < min_rate || rate > max_rate)
- return -EINVAL;
-
- div = rate * 2 / parent_rate;
- val = readl_relaxed(pll->base);
- val &= ~pll->div_mask;
- val |= div;
- writel_relaxed(val, pll->base);
-
- return clk_pllv3_wait_lock(pll);
-}
-
-static const struct clk_ops clk_pllv3_sys_ops = {
- .prepare = clk_pllv3_prepare,
- .unprepare = clk_pllv3_unprepare,
- .recalc_rate = clk_pllv3_sys_recalc_rate,
- .round_rate = clk_pllv3_sys_round_rate,
- .set_rate = clk_pllv3_sys_set_rate,
-};
-
-static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
- u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
- u32 div = readl_relaxed(pll->base) & pll->div_mask;
-
- return (parent_rate * div) + ((parent_rate / mfd) * mfn);
-}
-
-static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- unsigned long parent_rate = *prate;
- unsigned long min_rate = parent_rate * 27;
- unsigned long max_rate = parent_rate * 54;
- u32 div;
- u32 mfn, mfd = 1000000;
- s64 temp64;
-
- if (rate > max_rate)
- rate = max_rate;
- else if (rate < min_rate)
- rate = min_rate;
-
- div = rate / parent_rate;
- temp64 = (u64) (rate - div * parent_rate);
- temp64 *= mfd;
- do_div(temp64, parent_rate);
- mfn = temp64;
-
- return parent_rate * div + parent_rate / mfd * mfn;
-}
-
-static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_pllv3 *pll = to_clk_pllv3(hw);
- unsigned long min_rate = parent_rate * 27;
- unsigned long max_rate = parent_rate * 54;
- u32 val, div;
- u32 mfn, mfd = 1000000;
- s64 temp64;
-
- if (rate < min_rate || rate > max_rate)
- return -EINVAL;
-
- div = rate / parent_rate;
- temp64 = (u64) (rate - div * parent_rate);
- temp64 *= mfd;
- do_div(temp64, parent_rate);
- mfn = temp64;
-
- val = readl_relaxed(pll->base);
- val &= ~pll->div_mask;
- val |= div;
- writel_relaxed(val, pll->base);
- writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
- writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
-
- return clk_pllv3_wait_lock(pll);
-}
-
-static const struct clk_ops clk_pllv3_av_ops = {
- .prepare = clk_pllv3_prepare,
- .unprepare = clk_pllv3_unprepare,
- .recalc_rate = clk_pllv3_av_recalc_rate,
- .round_rate = clk_pllv3_av_round_rate,
- .set_rate = clk_pllv3_av_set_rate,
-};
-
-static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- return 500000000;
-}
-
-static const struct clk_ops clk_pllv3_enet_ops = {
- .prepare = clk_pllv3_prepare,
- .unprepare = clk_pllv3_unprepare,
- .recalc_rate = clk_pllv3_enet_recalc_rate,
-};
-
-struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
- const char *parent_name, void __iomem *base,
- u32 div_mask)
-{
- struct clk_pllv3 *pll;
- const struct clk_ops *ops;
- struct clk *clk;
- struct clk_init_data init;
-
- pll = kzalloc(sizeof(*pll), GFP_KERNEL);
- if (!pll)
- return ERR_PTR(-ENOMEM);
-
- switch (type) {
- case IMX_PLLV3_SYS:
- ops = &clk_pllv3_sys_ops;
- break;
- case IMX_PLLV3_USB_VF610:
- pll->div_shift = 1;
- case IMX_PLLV3_USB:
- ops = &clk_pllv3_ops;
- pll->powerup_set = true;
- break;
- case IMX_PLLV3_AV:
- ops = &clk_pllv3_av_ops;
- break;
- case IMX_PLLV3_ENET:
- ops = &clk_pllv3_enet_ops;
- break;
- default:
- ops = &clk_pllv3_ops;
- }
- pll->base = base;
- pll->div_mask = div_mask;
-
- init.name = name;
- init.ops = ops;
- init.flags = 0;
- init.parent_names = &parent_name;
- init.num_parents = 1;
-
- pll->hw.init = &init;
-
- clk = clk_register(NULL, &pll->hw);
- if (IS_ERR(clk))
- kfree(pll);
-
- return clk;
-}
+++ /dev/null
-/*
- * Copyright 2012-2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/of_address.h>
-#include <linux/clk.h>
-#include <dt-bindings/clock/vf610-clock.h>
-
-#include "clk.h"
-
-#define CCM_CCR (ccm_base + 0x00)
-#define CCM_CSR (ccm_base + 0x04)
-#define CCM_CCSR (ccm_base + 0x08)
-#define CCM_CACRR (ccm_base + 0x0c)
-#define CCM_CSCMR1 (ccm_base + 0x10)
-#define CCM_CSCDR1 (ccm_base + 0x14)
-#define CCM_CSCDR2 (ccm_base + 0x18)
-#define CCM_CSCDR3 (ccm_base + 0x1c)
-#define CCM_CSCMR2 (ccm_base + 0x20)
-#define CCM_CSCDR4 (ccm_base + 0x24)
-#define CCM_CLPCR (ccm_base + 0x2c)
-#define CCM_CISR (ccm_base + 0x30)
-#define CCM_CIMR (ccm_base + 0x34)
-#define CCM_CGPR (ccm_base + 0x3c)
-#define CCM_CCGR0 (ccm_base + 0x40)
-#define CCM_CCGR1 (ccm_base + 0x44)
-#define CCM_CCGR2 (ccm_base + 0x48)
-#define CCM_CCGR3 (ccm_base + 0x4c)
-#define CCM_CCGR4 (ccm_base + 0x50)
-#define CCM_CCGR5 (ccm_base + 0x54)
-#define CCM_CCGR6 (ccm_base + 0x58)
-#define CCM_CCGR7 (ccm_base + 0x5c)
-#define CCM_CCGR8 (ccm_base + 0x60)
-#define CCM_CCGR9 (ccm_base + 0x64)
-#define CCM_CCGR10 (ccm_base + 0x68)
-#define CCM_CCGR11 (ccm_base + 0x6c)
-#define CCM_CMEOR0 (ccm_base + 0x70)
-#define CCM_CMEOR1 (ccm_base + 0x74)
-#define CCM_CMEOR2 (ccm_base + 0x78)
-#define CCM_CMEOR3 (ccm_base + 0x7c)
-#define CCM_CMEOR4 (ccm_base + 0x80)
-#define CCM_CMEOR5 (ccm_base + 0x84)
-#define CCM_CPPDSR (ccm_base + 0x88)
-#define CCM_CCOWR (ccm_base + 0x8c)
-#define CCM_CCPGR0 (ccm_base + 0x90)
-#define CCM_CCPGR1 (ccm_base + 0x94)
-#define CCM_CCPGR2 (ccm_base + 0x98)
-#define CCM_CCPGR3 (ccm_base + 0x9c)
-
-#define CCM_CCGRx_CGn(n) ((n) * 2)
-
-#define PFD_PLL1_BASE (anatop_base + 0x2b0)
-#define PFD_PLL2_BASE (anatop_base + 0x100)
-#define PFD_PLL3_BASE (anatop_base + 0xf0)
-#define PLL1_CTRL (anatop_base + 0x270)
-#define PLL2_CTRL (anatop_base + 0x30)
-#define PLL3_CTRL (anatop_base + 0x10)
-#define PLL4_CTRL (anatop_base + 0x70)
-#define PLL5_CTRL (anatop_base + 0xe0)
-#define PLL6_CTRL (anatop_base + 0xa0)
-#define PLL7_CTRL (anatop_base + 0x20)
-#define ANA_MISC1 (anatop_base + 0x160)
-
-static void __iomem *anatop_base;
-static void __iomem *ccm_base;
-
-/* sources for multiplexer clocks, this is used multiple times */
-static const char *fast_sels[] = { "firc", "fxosc", };
-static const char *slow_sels[] = { "sirc_32k", "sxosc", };
-static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
-static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
-static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
-static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
-static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
-static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
-static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
-static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
-static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
-static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
-static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
-static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
-static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
-static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
-static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
-static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
-/* FTM counter clock source, not module clock */
-static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
-static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
-
-
-static struct clk_div_table pll4_audio_div_table[] = {
- { .val = 0, .div = 1 },
- { .val = 1, .div = 2 },
- { .val = 2, .div = 6 },
- { .val = 3, .div = 8 },
- { .val = 4, .div = 10 },
- { .val = 5, .div = 12 },
- { .val = 6, .div = 14 },
- { .val = 7, .div = 16 },
- { }
-};
-
-static struct clk *clk[VF610_CLK_END];
-static struct clk_onecell_data clk_data;
-
-static unsigned int const clks_init_on[] __initconst = {
- VF610_CLK_SYS_BUS,
- VF610_CLK_DDR_SEL,
-};
-
-static struct clk * __init vf610_get_fixed_clock(
- struct device_node *ccm_node, const char *name)
-{
- struct clk *clk = of_clk_get_by_name(ccm_node, name);
-
- /* Backward compatibility if device tree is missing clks assignments */
- if (IS_ERR(clk))
- clk = imx_obtain_fixed_clock(name, 0);
- return clk;
-};
-
-static void __init vf610_clocks_init(struct device_node *ccm_node)
-{
- struct device_node *np;
- int i;
-
- clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000);
- clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000);
- clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000);
-
- clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc");
- clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc");
- clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext");
- clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext");
-
- /* Clock source from external clock via LVDs PAD */
- clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1");
-
- clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
- anatop_base = of_iomap(np, 0);
- BUG_ON(!anatop_base);
-
- np = ccm_node;
- ccm_base = of_iomap(np, 0);
- BUG_ON(!ccm_base);
-
- clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
- clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
-
- clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
- clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-
- clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
- clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
- clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x2);
- clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
- clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
- clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
- clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x2);
-
- clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
- clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
- clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
- clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
- clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
- clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
- clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
-
- /* Do not bypass PLLs initially */
- clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
- clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
- clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
- clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
- clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
- clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
- clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
-
- clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
- clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
- clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
- clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
- clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
- clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
- clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
-
- clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
-
- clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
- clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
- clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
- clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
-
- clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
- clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
- clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
- clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
-
- clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
- clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
- clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
- clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
-
- clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
- clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
- clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels));
- clk[VF610_CLK_DDR_SEL] = imx_clk_mux("ddr_sel", CCM_CCSR, 6, 1, ddr_sels, ARRAY_SIZE(ddr_sels));
- clk[VF610_CLK_SYS_BUS] = imx_clk_divider("sys_bus", "sys_sel", CCM_CACRR, 0, 3);
- clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
- clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
-
- clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
- clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
- clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
-
- clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
- clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
-
- clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
-
- clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4);
- clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4);
- clk[VF610_CLK_QSPI0_X4_DIV] = imx_clk_divider("qspi0_x4", "qspi0_en", CCM_CSCDR3, 0, 2);
- clk[VF610_CLK_QSPI0_X2_DIV] = imx_clk_divider("qspi0_x2", "qspi0_x4", CCM_CSCDR3, 2, 1);
- clk[VF610_CLK_QSPI0_X1_DIV] = imx_clk_divider("qspi0_x1", "qspi0_x2", CCM_CSCDR3, 3, 1);
- clk[VF610_CLK_QSPI0] = imx_clk_gate2("qspi0", "qspi0_x1", CCM_CCGR2, CCM_CCGRx_CGn(4));
-
- clk[VF610_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", CCM_CSCMR1, 24, 2, qspi_sels, 4);
- clk[VF610_CLK_QSPI1_EN] = imx_clk_gate("qspi1_en", "qspi1_sel", CCM_CSCDR3, 12);
- clk[VF610_CLK_QSPI1_X4_DIV] = imx_clk_divider("qspi1_x4", "qspi1_en", CCM_CSCDR3, 8, 2);
- clk[VF610_CLK_QSPI1_X2_DIV] = imx_clk_divider("qspi1_x2", "qspi1_x4", CCM_CSCDR3, 10, 1);
- clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
- clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
-
- clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
- clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
- clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
- clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
- clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
- clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
- clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
- clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
-
- clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
-
- clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7));
- clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8));
- clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9));
- clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10));
- clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9));
- clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10));
-
- clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6));
- clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7));
-
- clk[VF610_CLK_DSPI0] = imx_clk_gate2("dspi0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(12));
- clk[VF610_CLK_DSPI1] = imx_clk_gate2("dspi1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(13));
- clk[VF610_CLK_DSPI2] = imx_clk_gate2("dspi2", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(12));
- clk[VF610_CLK_DSPI3] = imx_clk_gate2("dspi3", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(13));
-
- clk[VF610_CLK_WDT] = imx_clk_gate2("wdt", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(14));
-
- clk[VF610_CLK_ESDHC0_SEL] = imx_clk_mux("esdhc0_sel", CCM_CSCMR1, 16, 2, esdhc_sels, 4);
- clk[VF610_CLK_ESDHC0_EN] = imx_clk_gate("esdhc0_en", "esdhc0_sel", CCM_CSCDR2, 28);
- clk[VF610_CLK_ESDHC0_DIV] = imx_clk_divider("esdhc0_div", "esdhc0_en", CCM_CSCDR2, 16, 4);
- clk[VF610_CLK_ESDHC0] = imx_clk_gate2("eshc0", "esdhc0_div", CCM_CCGR7, CCM_CCGRx_CGn(1));
-
- clk[VF610_CLK_ESDHC1_SEL] = imx_clk_mux("esdhc1_sel", CCM_CSCMR1, 18, 2, esdhc_sels, 4);
- clk[VF610_CLK_ESDHC1_EN] = imx_clk_gate("esdhc1_en", "esdhc1_sel", CCM_CSCDR2, 29);
- clk[VF610_CLK_ESDHC1_DIV] = imx_clk_divider("esdhc1_div", "esdhc1_en", CCM_CSCDR2, 20, 4);
- clk[VF610_CLK_ESDHC1] = imx_clk_gate2("eshc1", "esdhc1_div", CCM_CCGR7, CCM_CCGRx_CGn(2));
-
- /*
- * ftm_ext_clk and ftm_fix_clk are FTM timer counter's
- * selectable clock sources, both use a common enable bit
- * in CCM_CSCDR1, selecting "dummy" clock as parent of
- * "ftm0_ext_fix" make it serve only for enable/disable.
- */
- clk[VF610_CLK_FTM0_EXT_SEL] = imx_clk_mux("ftm0_ext_sel", CCM_CSCMR2, 6, 2, ftm_ext_sels, 4);
- clk[VF610_CLK_FTM0_FIX_SEL] = imx_clk_mux("ftm0_fix_sel", CCM_CSCMR2, 14, 1, ftm_fix_sels, 2);
- clk[VF610_CLK_FTM0_EXT_FIX_EN] = imx_clk_gate("ftm0_ext_fix_en", "dummy", CCM_CSCDR1, 25);
- clk[VF610_CLK_FTM1_EXT_SEL] = imx_clk_mux("ftm1_ext_sel", CCM_CSCMR2, 8, 2, ftm_ext_sels, 4);
- clk[VF610_CLK_FTM1_FIX_SEL] = imx_clk_mux("ftm1_fix_sel", CCM_CSCMR2, 15, 1, ftm_fix_sels, 2);
- clk[VF610_CLK_FTM1_EXT_FIX_EN] = imx_clk_gate("ftm1_ext_fix_en", "dummy", CCM_CSCDR1, 26);
- clk[VF610_CLK_FTM2_EXT_SEL] = imx_clk_mux("ftm2_ext_sel", CCM_CSCMR2, 10, 2, ftm_ext_sels, 4);
- clk[VF610_CLK_FTM2_FIX_SEL] = imx_clk_mux("ftm2_fix_sel", CCM_CSCMR2, 16, 1, ftm_fix_sels, 2);
- clk[VF610_CLK_FTM2_EXT_FIX_EN] = imx_clk_gate("ftm2_ext_fix_en", "dummy", CCM_CSCDR1, 27);
- clk[VF610_CLK_FTM3_EXT_SEL] = imx_clk_mux("ftm3_ext_sel", CCM_CSCMR2, 12, 2, ftm_ext_sels, 4);
- clk[VF610_CLK_FTM3_FIX_SEL] = imx_clk_mux("ftm3_fix_sel", CCM_CSCMR2, 17, 1, ftm_fix_sels, 2);
- clk[VF610_CLK_FTM3_EXT_FIX_EN] = imx_clk_gate("ftm3_ext_fix_en", "dummy", CCM_CSCDR1, 28);
-
- /* ftm(n)_clk are FTM module operation clock */
- clk[VF610_CLK_FTM0] = imx_clk_gate2("ftm0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(8));
- clk[VF610_CLK_FTM1] = imx_clk_gate2("ftm1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(9));
- clk[VF610_CLK_FTM2] = imx_clk_gate2("ftm2", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(8));
- clk[VF610_CLK_FTM3] = imx_clk_gate2("ftm3", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(9));
-
- clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2);
- clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19);
- clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3);
- clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8));
- clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2);
- clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23);
- clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3);
- clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8));
-
- clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4);
- clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30);
- clk[VF610_CLK_ESAI_DIV] = imx_clk_divider("esai_div", "esai_en", CCM_CSCDR2, 24, 4);
- clk[VF610_CLK_ESAI] = imx_clk_gate2("esai", "esai_div", CCM_CCGR4, CCM_CCGRx_CGn(2));
-
- clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4);
- clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16);
- clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4);
- clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15));
-
- clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4);
- clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17);
- clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4);
- clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0));
-
- clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4);
- clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18);
- clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4);
- clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1));
-
- clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4);
- clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19);
- clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4);
- clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2));
-
- clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4);
- clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9);
- clk[VF610_CLK_NFC_PRE_DIV] = imx_clk_divider("nfc_pre_div", "nfc_en", CCM_CSCDR3, 13, 3);
- clk[VF610_CLK_NFC_FRAC_DIV] = imx_clk_divider("nfc_frac_div", "nfc_pre_div", CCM_CSCDR2, 4, 4);
- clk[VF610_CLK_NFC] = imx_clk_gate2("nfc", "nfc_frac_div", CCM_CCGR10, CCM_CCGRx_CGn(0));
-
- clk[VF610_CLK_GPU_SEL] = imx_clk_mux("gpu_sel", CCM_CSCMR1, 14, 1, gpu_sels, 2);
- clk[VF610_CLK_GPU_EN] = imx_clk_gate("gpu_en", "gpu_sel", CCM_CSCDR2, 10);
- clk[VF610_CLK_GPU2D] = imx_clk_gate2("gpu", "gpu_en", CCM_CCGR8, CCM_CCGRx_CGn(15));
-
- clk[VF610_CLK_VADC_SEL] = imx_clk_mux("vadc_sel", CCM_CSCMR1, 8, 2, vadc_sels, 3);
- clk[VF610_CLK_VADC_EN] = imx_clk_gate("vadc_en", "vadc_sel", CCM_CSCDR1, 22);
- clk[VF610_CLK_VADC_DIV] = imx_clk_divider("vadc_div", "vadc_en", CCM_CSCDR1, 20, 2);
- clk[VF610_CLK_VADC_DIV_HALF] = imx_clk_fixed_factor("vadc_div_half", "vadc_div", 1, 2);
- clk[VF610_CLK_VADC] = imx_clk_gate2("vadc", "vadc_div", CCM_CCGR8, CCM_CCGRx_CGn(7));
-
- clk[VF610_CLK_ADC0] = imx_clk_gate2("adc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(11));
- clk[VF610_CLK_ADC1] = imx_clk_gate2("adc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(11));
- clk[VF610_CLK_DAC0] = imx_clk_gate2("dac0", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(12));
- clk[VF610_CLK_DAC1] = imx_clk_gate2("dac1", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(13));
-
- clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1));
-
- clk[VF610_CLK_FLEXCAN0_EN] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11);
- clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0));
- clk[VF610_CLK_FLEXCAN1_EN] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12);
- clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4));
-
- clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5));
- clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1));
- clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
-
- clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7));
-
- imx_check_clocks(clk, ARRAY_SIZE(clk));
-
- clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]);
- clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2);
- clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2);
- clk_set_rate(clk[VF610_CLK_QSPI0_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X2_DIV]) / 2);
-
- clk_set_parent(clk[VF610_CLK_QSPI1_SEL], clk[VF610_CLK_PLL1_PFD4]);
- clk_set_rate(clk[VF610_CLK_QSPI1_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_SEL]) / 2);
- clk_set_rate(clk[VF610_CLK_QSPI1_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X4_DIV]) / 2);
- clk_set_rate(clk[VF610_CLK_QSPI1_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X2_DIV]) / 2);
-
- clk_set_parent(clk[VF610_CLK_SAI0_SEL], clk[VF610_CLK_AUDIO_EXT]);
- clk_set_parent(clk[VF610_CLK_SAI1_SEL], clk[VF610_CLK_AUDIO_EXT]);
- clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]);
- clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]);
-
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
- clk_prepare_enable(clk[clks_init_on[i]]);
-
- /* Add the clocks to provider list */
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-CLK_OF_DECLARE(vf610, "fsl,vf610-ccm", vf610_clocks_init);
+++ /dev/null
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include "clk.h"
-
-DEFINE_SPINLOCK(imx_ccm_lock);
-
-void __init imx_check_clocks(struct clk *clks[], unsigned int count)
-{
- unsigned i;
-
- for (i = 0; i < count; i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX clk %u: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
-}
-
-static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
-{
- struct of_phandle_args phandle;
- struct clk *clk = ERR_PTR(-ENODEV);
- char *path;
-
- path = kasprintf(GFP_KERNEL, "/clocks/%s", name);
- if (!path)
- return ERR_PTR(-ENOMEM);
-
- phandle.np = of_find_node_by_path(path);
- kfree(path);
-
- if (phandle.np) {
- clk = of_clk_get_from_provider(&phandle);
- of_node_put(phandle.np);
- }
- return clk;
-}
-
-struct clk * __init imx_obtain_fixed_clock(
- const char *name, unsigned long rate)
-{
- struct clk *clk;
-
- clk = imx_obtain_fixed_clock_from_dt(name);
- if (IS_ERR(clk))
- clk = imx_clk_fixed(name, rate);
- return clk;
-}
-
-/*
- * This fixups the register CCM_CSCMR1 write value.
- * The write/read/divider values of the aclk_podf field
- * of that register have the relationship described by
- * the following table:
- *
- * write value read value divider
- * 3b'000 3b'110 7
- * 3b'001 3b'111 8
- * 3b'010 3b'100 5
- * 3b'011 3b'101 6
- * 3b'100 3b'010 3
- * 3b'101 3b'011 4
- * 3b'110 3b'000 1
- * 3b'111 3b'001 2(default)
- *
- * That's why we do the xor operation below.
- */
-#define CSCMR1_FIXUP 0x00600000
-
-void imx_cscmr1_fixup(u32 *val)
-{
- *val ^= CSCMR1_FIXUP;
- return;
-}
+++ /dev/null
-#ifndef __MACH_IMX_CLK_H
-#define __MACH_IMX_CLK_H
-
-#include <linux/spinlock.h>
-#include <linux/clk-provider.h>
-
-extern spinlock_t imx_ccm_lock;
-
-void imx_check_clocks(struct clk *clks[], unsigned int count);
-
-extern void imx_cscmr1_fixup(u32 *val);
-
-struct clk *imx_clk_pllv1(const char *name, const char *parent,
- void __iomem *base);
-
-struct clk *imx_clk_pllv2(const char *name, const char *parent,
- void __iomem *base);
-
-enum imx_pllv3_type {
- IMX_PLLV3_GENERIC,
- IMX_PLLV3_SYS,
- IMX_PLLV3_USB,
- IMX_PLLV3_USB_VF610,
- IMX_PLLV3_AV,
- IMX_PLLV3_ENET,
-};
-
-struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
- const char *parent_name, void __iomem *base, u32 div_mask);
-
-struct clk *clk_register_gate2(struct device *dev, const char *name,
- const char *parent_name, unsigned long flags,
- void __iomem *reg, u8 bit_idx,
- u8 clk_gate_flags, spinlock_t *lock,
- unsigned int *share_count);
-
-struct clk * imx_obtain_fixed_clock(
- const char *name, unsigned long rate);
-
-struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
- void __iomem *reg, u8 shift, u32 exclusive_mask);
-
-static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
- void __iomem *reg, u8 shift)
-{
- return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, 0, &imx_ccm_lock, NULL);
-}
-
-static inline struct clk *imx_clk_gate2_shared(const char *name,
- const char *parent, void __iomem *reg, u8 shift,
- unsigned int *share_count)
-{
- return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, 0, &imx_ccm_lock, share_count);
-}
-
-struct clk *imx_clk_pfd(const char *name, const char *parent_name,
- void __iomem *reg, u8 idx);
-
-struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
- void __iomem *reg, u8 shift, u8 width,
- void __iomem *busy_reg, u8 busy_shift);
-
-struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
- u8 width, void __iomem *busy_reg, u8 busy_shift,
- const char **parent_names, int num_parents);
-
-struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
- void __iomem *reg, u8 shift, u8 width,
- void (*fixup)(u32 *val));
-
-struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
- u8 shift, u8 width, const char **parents,
- int num_parents, void (*fixup)(u32 *val));
-
-static inline struct clk *imx_clk_fixed(const char *name, int rate)
-{
- return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
-}
-
-static inline struct clk *imx_clk_divider(const char *name, const char *parent,
- void __iomem *reg, u8 shift, u8 width)
-{
- return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
- reg, shift, width, 0, &imx_ccm_lock);
-}
-
-static inline struct clk *imx_clk_divider_flags(const char *name,
- const char *parent, void __iomem *reg, u8 shift, u8 width,
- unsigned long flags)
-{
- return clk_register_divider(NULL, name, parent, flags,
- reg, shift, width, 0, &imx_ccm_lock);
-}
-
-static inline struct clk *imx_clk_gate(const char *name, const char *parent,
- void __iomem *reg, u8 shift)
-{
- return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, 0, &imx_ccm_lock);
-}
-
-static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
- void __iomem *reg, u8 shift)
-{
- return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
-}
-
-static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
- u8 shift, u8 width, const char **parents, int num_parents)
-{
- return clk_register_mux(NULL, name, parents, num_parents,
- CLK_SET_RATE_NO_REPARENT, reg, shift,
- width, 0, &imx_ccm_lock);
-}
-
-static inline struct clk *imx_clk_mux_flags(const char *name,
- void __iomem *reg, u8 shift, u8 width, const char **parents,
- int num_parents, unsigned long flags)
-{
- return clk_register_mux(NULL, name, parents, num_parents,
- flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0,
- &imx_ccm_lock);
-}
-
-static inline struct clk *imx_clk_fixed_factor(const char *name,
- const char *parent, unsigned int mult, unsigned int div)
-{
- return clk_register_fixed_factor(NULL, name, parent,
- CLK_SET_RATE_PARENT, mult, div);
-}
-
-struct clk *imx_clk_cpu(const char *name, const char *parent_name,
- struct clk *div, struct clk *mux, struct clk *pll,
- struct clk *step);
-
-#endif
void imx31_soc_init(void);
void imx35_soc_init(void);
void epit_timer_init(void __iomem *base, int irq);
-void mxc_timer_init(void __iomem *, int);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx27_clocks_init(unsigned long fref);
void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
-int mx51_revision(void);
-int mx53_revision(void);
void imx_set_aips(void __iomem *);
void imx_aips_allow_unprivileged_access(const char *compat);
int mxc_device_init(void);
void imx_set_soc_revision(unsigned int rev);
-unsigned int imx_get_soc_revision(void);
void imx_init_revision_from_anatop(void);
struct device *imx_soc_device_init(void);
void imx6_enable_rbc(bool enable);
};
void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-void imx_print_silicon_rev(const char *cpu, int srev);
void imx_enable_cpu(int cpu, bool enable);
void imx_set_cpu_jump(int cpu, void *jump_addr);
void imx_anatop_init(void);
void imx_anatop_pre_suspend(void);
void imx_anatop_post_resume(void);
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
int imx_mmdc_get_ddr_type(void);
#ifdef CONFIG_SUSPEND
void v7_cpu_resume(void);
+void imx53_suspend(void __iomem *ocram_vbase);
+extern const u32 imx53_suspend_sz;
void imx6_suspend(void __iomem *ocram_vbase);
#else
static inline void v7_cpu_resume(void) {}
+static inline void imx53_suspend(void __iomem *ocram_vbase) {}
+static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif
+void imx6_pm_ccm_init(const char *ccm_compat);
void imx6q_pm_init(void);
void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
void imx6sx_pm_init(void);
-void imx6q_pm_set_ccm_base(void __iomem *base);
#ifdef CONFIG_PM
void imx51_pm_init(void);
void imx53_pm_init(void);
-void imx5_pm_set_ccm_base(void __iomem *base);
#else
static inline void imx51_pm_init(void) {}
static inline void imx53_pm_init(void) {}
-static inline void imx5_pm_set_ccm_base(void __iomem *base) {}
#endif
#ifdef CONFIG_NEON
case MXC_CPU_IMX6Q:
soc_id = "i.MX6Q";
break;
+ case MXC_CPU_IMX7D:
+ soc_id = "i.MX7D";
+ break;
default:
soc_id = "Unknown";
}
*/
if (!spin_trylock(&master_lock))
goto idle;
- imx6q_set_lpm(WAIT_UNCLOCKED);
+ imx6_set_lpm(WAIT_UNCLOCKED);
cpu_do_idle();
- imx6q_set_lpm(WAIT_CLOCKED);
+ imx6_set_lpm(WAIT_CLOCKED);
spin_unlock(&master_lock);
goto done;
}
static int imx6sl_enter_wait(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
- imx6q_set_lpm(WAIT_UNCLOCKED);
+ imx6_set_lpm(WAIT_UNCLOCKED);
/*
* Software workaround for ERR005311, see function
* description for details.
imx6sl_set_wait_clk(true);
cpu_do_idle();
imx6sl_set_wait_clk(false);
- imx6q_set_lpm(WAIT_CLOCKED);
+ imx6_set_lpm(WAIT_CLOCKED);
return index;
}
static int imx6sx_enter_wait(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
- imx6q_set_lpm(WAIT_UNCLOCKED);
+ imx6_set_lpm(WAIT_UNCLOCKED);
switch (index) {
case 1:
break;
}
- imx6q_set_lpm(WAIT_CLOCKED);
+ imx6_set_lpm(WAIT_CLOCKED);
return index;
}
+++ /dev/null
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <video/platform_lcd.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-static const struct fb_videomode fb_modedb[] = {
- {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = KHZ2PICOS(6500),
- .left_margin = 68,
- .right_margin = 20,
- .upper_margin = 15,
- .lower_margin = 4,
- .hsync_len = 30,
- .vsync_len = 3,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
- {
- .name = "DVI-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 32000,
- .left_margin = 100,
- .right_margin = 100,
- .upper_margin = 7,
- .lower_margin = 100,
- .hsync_len = 7,
- .vsync_len = 7,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
- {
- .name = "DVI-SVGA",
- .refresh = 60,
- .xres = 800,
- .yres = 600,
- .pixclock = 25000,
- .left_margin = 75,
- .right_margin = 75,
- .upper_margin = 7,
- .lower_margin = 75,
- .hsync_len = 7,
- .vsync_len = 7,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "CMO-QVGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
- /* LCD */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- /* Backlight */
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- /* LCD_PWR */
- MX35_PAD_D3_CLS__GPIO1_4,
- /* LED */
- MX35_PAD_LD23__GPIO3_29,
- /* SWITCH */
- MX35_PAD_LD19__GPIO3_25,
- /* UART2 */
- MX35_PAD_CTS2__UART2_CTS,
- MX35_PAD_RTS2__UART2_RTS,
- MX35_PAD_TXD2__UART2_TXD_MUX,
- MX35_PAD_RXD2__UART2_RXD_MUX,
- /* I2S */
- MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
- MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
- MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
- MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
- /* CAN2 */
- MX35_PAD_TX5_RX0__CAN2_TXCAN,
- MX35_PAD_TX4_RX1__CAN2_RXCAN,
- /* SDCARD */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* SD1 CD */
- MX35_PAD_LD18__GPIO3_24,
- /* SPI */
- MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
- MX35_PAD_CSPI1_MISO__CSPI1_MISO,
- MX35_PAD_CSPI1_SS0__GPIO1_18,
- MX35_PAD_CSPI1_SS1__GPIO1_19,
- MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
- MX35_PAD_CSPI1_SPI_RDY__GPIO3_5,
-};
-
-#define GPIO_LED1 IMX_GPIO_NR(3, 29)
-#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR IMX_GPIO_NR(1, 4)
-#define GPIO_SD1CD IMX_GPIO_NR(3, 24)
-#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 18)
-#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 19)
-#define GPIO_SPI1_IRQ IMX_GPIO_NR(3, 5)
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(GPIO_LCDPWR, 1);
- else
- gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
- .set_power = eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
-};
-
-static struct gpio_led eukrea_mbimxsd_leds[] = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_LED1,
- },
-};
-
-static const struct gpio_led_platform_data
- eukrea_mbimxsd_led_info __initconst = {
- .leds = eukrea_mbimxsd_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
- {
- .gpio = GPIO_SWITCH1,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data
- eukrea_mbimxsd_button_data __initconst = {
- .buttons = eukrea_mbimxsd_gpio_buttons,
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
- .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
- .cd_gpio = GPIO_SD1CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_NONE,
-};
-
-static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = {
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- },
-};
-
-static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
-
-static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = {
- .chipselect = eukrea_mbimxsd35_spi_cs,
- .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs),
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx35 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd35_baseboard_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
- ARRAY_SIZE(eukrea_mbimxsd_pads)))
- printk(KERN_ERR "error setting mbimxsd pads !\n");
-
- imx35_add_imx_uart1(&uart_pdata);
- imx35_add_ipu_core();
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
- imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
- imx35_add_flexcan1();
- imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
- gpio_request(GPIO_LED1, "LED1");
- gpio_direction_output(GPIO_LED1, 1);
- gpio_free(GPIO_LED1);
-
- gpio_request(GPIO_SWITCH1, "SWITCH1");
- gpio_direction_input(GPIO_SWITCH1);
- gpio_free(GPIO_SWITCH1);
-
- gpio_request(GPIO_LCDPWR, "LCDPWR");
- gpio_direction_output(GPIO_LCDPWR, 1);
-
- i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
- ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
- gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
- gpio_direction_input(GPIO_SPI1_IRQ);
- gpio_free(GPIO_SPI1_IRQ);
- imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data);
- spi_register_board_info(eukrea_mbimxsd35_spi_board_info,
- ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info));
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
- imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
- imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
}
-static struct irq_domain_ops imx_gpc_domain_ops = {
+static const struct irq_domain_ops imx_gpc_domain_ops = {
.xlate = imx_gpc_domain_xlate,
.alloc = imx_gpc_domain_alloc,
.free = irq_domain_free_irqs_common,
static struct platform_driver imx_gpc_driver = {
.driver = {
.name = "imx-gpc",
- .owner = THIS_MODULE,
.of_match_table = imx_gpc_dt_ids,
},
.probe = imx_gpc_probe,
#ifndef __ASSEMBLY__
#include <asm/io.h>
+#include <soc/imx/revision.h>
#endif
#include <asm/sizes.h>
.endm
ENTRY(v7_secondary_startup)
- bl v7_invalidate_l1
set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)
#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32);
/*
* set the mode for a IOMUX pin.
*/
+++ /dev/null
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- * Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data
- eukrea_cpuimx35_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
-static int tsc2007_get_pendown_state(struct device *dev)
-{
- return !gpio_get_value(TSC2007_IRQGPIO);
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("tsc2007", 0x48),
- .platform_data = &tsc2007_info,
- /* irq number is run-time assigned */
- },
-};
-
-static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* I2C1 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- /* TSC2007 IRQ */
- MX35_PAD_ATA_DA2__GPIO3_2,
-};
-
-static const struct mxc_nand_platform_data
- eukrea_cpuimx35_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
- .init = eukrea_cpuimx35_otg_init,
- .portsc = MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
- .init = eukrea_cpuimx35_usbh1_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx35_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx35_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
- ARRAY_SIZE(eukrea_cpuimx35_pads));
-
- imx35_add_fec(NULL);
- imx35_add_imx2_wdt();
-
- imx35_add_imx_uart0(&uart_pdata);
- imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
-
- eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO);
- i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
- imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
-
- if (otg_mode_host)
- imx35_add_mxc_ehci_otg(&otg_pdata);
- else
- imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
- imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
- eukrea_mbimxsd35_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx35_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
- /* Maintainer: Eukrea Electromatique */
- .atag_offset = 0x100,
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = eukrea_cpuimx35_timer_init,
- .init_machine = eukrea_cpuimx35_init,
- .restart = mxc_restart,
-MACHINE_END
imx_init_l2cache();
imx_src_init();
irqchip_init();
+ imx6_pm_ccm_init("fsl,imx6q-ccm");
}
static const char * const imx6q_dt_compat[] __initconst = {
imx_init_l2cache();
imx_src_init();
irqchip_init();
+ imx6_pm_ccm_init("fsl,imx6sl-ccm");
}
static const char * const imx6sl_dt_compat[] __initconst = {
imx_init_l2cache();
imx_src_init();
irqchip_init();
+ imx6_pm_ccm_init("fsl,imx6sx-ccm");
}
static void __init imx6sx_init_late(void)
--- /dev/null
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx7d_init_machine(void)
+{
+ struct device *parent;
+
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ imx_anatop_init();
+}
+
+static void __init imx7d_init_irq(void)
+{
+ imx_init_revision_from_anatop();
+ imx_src_init();
+ irqchip_init();
+}
+
+static const char *imx7d_dt_compat[] __initconst = {
+ "fsl,imx7d",
+ NULL,
+};
+
+DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
+ .init_irq = imx7d_init_irq,
+ .init_machine = imx7d_init_machine,
+ .dt_compat = imx7d_dt_compat,
+MACHINE_END
"fsl,vf510",
"fsl,vf600",
"fsl,vf610",
+ "fsl,vf610m4",
NULL,
};
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include "common.h"
+
#define MMDC_MAPSR 0x404
#define BP_MMDC_MAPSR_PSD 0
#define BP_MMDC_MAPSR_PSS 4
#define MX27_DMA_REQ_SDHC3 36
#define MX27_DMA_REQ_NFC 37
-#ifndef __ASSEMBLY__
-extern int mx27_revision(void);
-#endif
-
#endif /* ifndef __MACH_MX27_H__ */
#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */
-/* Mandatory defines used globally */
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx35_revision(void);
-extern int mx31_revision(void);
-#endif
-
#endif /* ifndef __MACH_MX3x_H__ */
/*
- * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2010-2015 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
#define MXC_CPU_IMX6DL 0x61
#define MXC_CPU_IMX6SX 0x62
#define MXC_CPU_IMX6Q 0x63
-
-#define IMX_CHIP_REVISION_1_0 0x10
-#define IMX_CHIP_REVISION_1_1 0x11
-#define IMX_CHIP_REVISION_1_2 0x12
-#define IMX_CHIP_REVISION_1_3 0x13
-#define IMX_CHIP_REVISION_1_4 0x14
-#define IMX_CHIP_REVISION_1_5 0x15
-#define IMX_CHIP_REVISION_2_0 0x20
-#define IMX_CHIP_REVISION_2_1 0x21
-#define IMX_CHIP_REVISION_2_2 0x22
-#define IMX_CHIP_REVISION_2_3 0x23
-#define IMX_CHIP_REVISION_3_0 0x30
-#define IMX_CHIP_REVISION_3_1 0x31
-#define IMX_CHIP_REVISION_3_2 0x32
-#define IMX_CHIP_REVISION_3_3 0x33
-#define IMX_CHIP_REVISION_UNKNOWN 0xff
+#define MXC_CPU_IMX7D 0x72
#define IMX_DDR_TYPE_LPDDR2 1
return __mxc_cpu_type == MXC_CPU_IMX6Q;
}
+static inline bool cpu_is_imx7d(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX7D;
+}
+
struct cpu_op {
u32 cpu_rate;
};
#include <linux/io.h>
#include <linux/err.h>
#include <linux/export.h>
+
+#include <linux/genalloc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/tlbflush.h>
*/
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
+struct imx5_suspend_io_state {
+ u32 offset;
+ u32 clear;
+ u32 set;
+ u32 saved_value;
+};
+
struct imx5_pm_data {
+ phys_addr_t ccm_addr;
phys_addr_t cortex_addr;
phys_addr_t gpc_addr;
+ phys_addr_t m4if_addr;
+ phys_addr_t iomuxc_addr;
+ void (*suspend_asm)(void __iomem *ocram_vbase);
+ const u32 *suspend_asm_sz;
+ const struct imx5_suspend_io_state *suspend_io_config;
+ int suspend_io_count;
+};
+
+static const struct imx5_suspend_io_state imx53_suspend_io_config[] = {
+#define MX53_DSE_HIGHZ_MASK (0x7 << 19)
+ {.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */
+ {.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */
+ {.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */
+ {.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */
+ {.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */
+ {.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */
+ {.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */
+ {.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */
+
+ {.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */
+ {.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */
+ {.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */
+ {.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */
+ {.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */
+ {.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */
+ {.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */
+ {.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */
+ {.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */
+ {.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */
+ {.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */
+
+ /* Controls the CKE signal which is required to leave self refresh */
+ {.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */
};
static const struct imx5_pm_data imx51_pm_data __initconst = {
+ .ccm_addr = 0x73fd4000,
.cortex_addr = 0x83fa0000,
.gpc_addr = 0x73fd8000,
};
static const struct imx5_pm_data imx53_pm_data __initconst = {
+ .ccm_addr = 0x53fd4000,
.cortex_addr = 0x63fa0000,
.gpc_addr = 0x53fd8000,
+ .m4if_addr = 0x63fd8000,
+ .iomuxc_addr = 0x53fa8000,
+ .suspend_asm = &imx53_suspend,
+ .suspend_asm_sz = &imx53_suspend_sz,
+ .suspend_io_config = imx53_suspend_io_config,
+ .suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config),
};
+#define MX5_MAX_SUSPEND_IOSTATE ARRAY_SIZE(imx53_suspend_io_config)
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct
+ * definition is changed, the offset definition in that file
+ * must be also changed accordingly otherwise, the suspend to ocram
+ * function will be broken!
+ */
+struct imx5_cpu_suspend_info {
+ void __iomem *m4if_base;
+ void __iomem *iomuxc_base;
+ u32 io_count;
+ struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOSTATE];
+} __aligned(8);
+
static void __iomem *ccm_base;
static void __iomem *cortex_base;
static void __iomem *gpc_base;
-
-void __init imx5_pm_set_ccm_base(void __iomem *base)
-{
- ccm_base = base;
-}
+static void __iomem *suspend_ocram_base;
+static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
/*
* set cpu low power mode before WFI instruction. This function is called
/*clear the EMPGC0/1 bits */
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
+
+ if (imx5_suspend_in_ocram_fn)
+ imx5_suspend_in_ocram_fn(suspend_ocram_base);
+ else
+ cpu_do_idle();
+
+ } else {
+ cpu_do_idle();
}
- cpu_do_idle();
/* return registers to default idle state */
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
imx5_cpu_do_idle();
}
+static int __init imx_suspend_alloc_ocram(
+ size_t size,
+ void __iomem **virt_out,
+ phys_addr_t *phys_out)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+ struct gen_pool *ocram_pool;
+ unsigned long ocram_base;
+ void __iomem *virt;
+ phys_addr_t phys;
+ int ret = 0;
+
+ /* Copied from imx6: TODO factorize */
+ node = of_find_compatible_node(NULL, NULL, "mmio-sram");
+ if (!node) {
+ pr_warn("%s: failed to find ocram node!\n", __func__);
+ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(node);
+ if (!pdev) {
+ pr_warn("%s: failed to find ocram device!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_pool = dev_get_gen_pool(&pdev->dev);
+ if (!ocram_pool) {
+ pr_warn("%s: ocram pool unavailable!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_base = gen_pool_alloc(ocram_pool, size);
+ if (!ocram_base) {
+ pr_warn("%s: unable to alloc ocram!\n", __func__);
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+ virt = __arm_ioremap_exec(phys, size, false);
+ if (phys_out)
+ *phys_out = phys;
+ if (virt_out)
+ *virt_out = virt;
+
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data)
+{
+ struct imx5_cpu_suspend_info *suspend_info;
+ int ret;
+ /* Need this to avoid compile error due to const typeof in fncpy.h */
+ void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm;
+
+ if (!suspend_asm)
+ return 0;
+
+ if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz)
+ return -EINVAL;
+
+ ret = imx_suspend_alloc_ocram(
+ *soc_data->suspend_asm_sz + sizeof(*suspend_info),
+ &suspend_ocram_base, NULL);
+ if (ret)
+ return ret;
+
+ suspend_info = suspend_ocram_base;
+
+ suspend_info->io_count = soc_data->suspend_io_count;
+ memcpy(suspend_info->io_state, soc_data->suspend_io_config,
+ sizeof(*suspend_info->io_state) * soc_data->suspend_io_count);
+
+ suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K);
+ if (!suspend_info->m4if_base) {
+ ret = -ENOMEM;
+ goto failed_map_m4if;
+ }
+
+ suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K);
+ if (!suspend_info->iomuxc_base) {
+ ret = -ENOMEM;
+ goto failed_map_iomuxc;
+ }
+
+ imx5_suspend_in_ocram_fn = fncpy(
+ suspend_ocram_base + sizeof(*suspend_info),
+ suspend_asm,
+ *soc_data->suspend_asm_sz);
+
+ return 0;
+
+failed_map_iomuxc:
+ iounmap(suspend_info->m4if_base);
+
+failed_map_m4if:
+ return ret;
+}
+
static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
{
int ret;
arm_pm_idle = imx5_pm_idle;
+ ccm_base = ioremap(data->ccm_addr, SZ_16K);
cortex_base = ioremap(data->cortex_addr, SZ_16K);
gpc_base = ioremap(data->gpc_addr, SZ_16K);
WARN_ON(!ccm_base || !cortex_base || !gpc_base);
if (ret)
pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
+ ret = imx5_suspend_init(data);
+ if (ret)
+ pr_warn("%s: No DDR LPM support with suspend %d!\n",
+ __func__, ret);
+
suspend_set_ops(&mx5_suspend_ops);
return 0;
void __init imx51_pm_init(void)
{
- imx5_pm_common_init(&imx51_pm_data);
+ if (IS_ENABLED(CONFIG_SOC_IMX51))
+ imx5_pm_common_init(&imx51_pm_data);
}
void __init imx53_pm_init(void)
{
- imx5_pm_common_init(&imx53_pm_data);
+ if (IS_ENABLED(CONFIG_SOC_IMX53))
+ imx5_pm_common_init(&imx53_pm_data);
}
writel_relaxed(val, ccm_base + CCR);
}
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
{
u32 val = readl_relaxed(ccm_base + CLPCR);
{
switch (state) {
case PM_SUSPEND_STANDBY:
- imx6q_set_lpm(STOP_POWER_ON);
+ imx6_set_lpm(STOP_POWER_ON);
imx6q_set_int_mem_clk_lpm(true);
imx_gpc_pre_suspend(false);
if (cpu_is_imx6sl())
if (cpu_is_imx6sl())
imx6sl_set_wait_clk(false);
imx_gpc_post_resume();
- imx6q_set_lpm(WAIT_CLOCKED);
+ imx6_set_lpm(WAIT_CLOCKED);
break;
case PM_SUSPEND_MEM:
- imx6q_set_lpm(STOP_POWER_OFF);
+ imx6_set_lpm(STOP_POWER_OFF);
imx6q_set_int_mem_clk_lpm(false);
imx6q_enable_wb(true);
/*
imx6_enable_rbc(false);
imx6q_enable_wb(false);
imx6q_set_int_mem_clk_lpm(true);
- imx6q_set_lpm(WAIT_CLOCKED);
+ imx6_set_lpm(WAIT_CLOCKED);
break;
default:
return -EINVAL;
.valid = imx6q_pm_valid,
};
-void __init imx6q_pm_set_ccm_base(void __iomem *base)
-{
- ccm_base = base;
-}
-
static int __init imx6_pm_get_base(struct imx6_pm_base *base,
const char *compat)
{
/*
* ccm physical address is not used by asm code currently,
- * so get ccm virtual address directly, as we already have
- * it from ccm driver.
+ * so get ccm virtual address directly.
*/
pm_info->ccm_base.vbase = ccm_base;
/*
* This is for SW workaround step #1 of ERR007265, see comments
- * in imx6q_set_lpm for details of this errata.
+ * in imx6_set_lpm for details of this errata.
* Force IOMUXC irq pending, so that the interrupt to GPC can be
* used to deassert dsm_request signal when the signal gets
* asserted unexpectedly.
IMX6Q_GPR1_GINT);
}
+void __init imx6_pm_ccm_init(const char *ccm_compat)
+{
+ struct device_node *np;
+ u32 val;
+
+ np = of_find_compatible_node(NULL, NULL, ccm_compat);
+ ccm_base = of_iomap(np, 0);
+ BUG_ON(!ccm_base);
+
+ /*
+ * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core
+ * clock being shut down unexpectedly by WAIT mode.
+ */
+ val = readl_relaxed(ccm_base + CLPCR);
+ val &= ~BM_CLPCR_LPM;
+ writel_relaxed(val, ccm_base + CLPCR);
+}
+
void __init imx6q_pm_init(void)
{
imx6_pm_common_init(&imx6q_pm_data);
--- /dev/null
+/*
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ */
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+
+#define M4IF_MCR0_OFFSET (0x008C)
+#define M4IF_MCR0_FDVFS (0x1 << 11)
+#define M4IF_MCR0_FDVACK (0x1 << 27)
+
+ .align 3
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * On entry
+ * r0: pm_info structure address;
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ * .
+ * .
+ * .
+ * ^
+ * ^
+ * ^
+ * imx53_suspend code
+ * PM_INFO structure(imx53_suspend_info)
+ * ======================== low address =======================
+ */
+
+/* Offsets of members of struct imx53_suspend_info */
+#define SUSPEND_INFO_MX53_M4IF_V_OFFSET 0x0
+#define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET 0x4
+#define SUSPEND_INFO_MX53_IO_COUNT_OFFSET 0x8
+#define SUSPEND_INFO_MX53_IO_STATE_OFFSET 0xc
+
+ENTRY(imx53_suspend)
+ stmfd sp!, {r4,r5,r6,r7}
+
+ /* Save pad config */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+ cmp r1, #0
+ beq skip_pad_conf_1
+
+ add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+ ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+1:
+ ldr r5, [r2], #12 /* IOMUXC register offset */
+ ldr r6, [r3, r5] /* current value */
+ str r6, [r2], #4 /* save area */
+ subs r1, r1, #1
+ bne 1b
+
+skip_pad_conf_1:
+ /* Set FDVFS bit of M4IF_MCR0 to request DDR to enter self-refresh */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ orr r2, r2, #M4IF_MCR0_FDVFS
+ str r2,[r1, #M4IF_MCR0_OFFSET]
+
+ /* Poll FDVACK bit of M4IF_MCR to wait for DDR to enter self-refresh */
+wait_sr_ack:
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ ands r2, r2, #M4IF_MCR0_FDVACK
+ beq wait_sr_ack
+
+ /* Set pad config */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+ cmp r1, #0
+ beq skip_pad_conf_2
+
+ add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+ ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+2:
+ ldr r5, [r2], #4 /* IOMUXC register offset */
+ ldr r6, [r2], #4 /* clear */
+ ldr r7, [r3, r5]
+ bic r7, r7, r6
+ ldr r6, [r2], #8 /* set */
+ orr r7, r7, r6
+ str r7, [r3, r5]
+ subs r1, r1, #1
+ bne 2b
+
+skip_pad_conf_2:
+ /* Zzz, enter stop mode */
+ wfi
+ nop
+ nop
+ nop
+ nop
+
+ /* Restore pad config */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+ cmp r1, #0
+ beq skip_pad_conf_3
+
+ add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+ ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+3:
+ ldr r5, [r2], #12 /* IOMUXC register offset */
+ ldr r6, [r2], #4 /* saved value */
+ str r6, [r3, r5]
+ subs r1, r1, #1
+ bne 3b
+
+skip_pad_conf_3:
+ /* Clear FDVFS bit of M4IF_MCR0 to request DDR to exit self-refresh */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ bic r2, r2, #M4IF_MCR0_FDVFS
+ str r2,[r1, #M4IF_MCR0_OFFSET]
+
+ /* Poll FDVACK bit of M4IF_MCR to wait for DDR to exit self-refresh */
+wait_ar_ack:
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ ands r2, r2, #M4IF_MCR0_FDVACK
+ bne wait_ar_ack
+
+ /* Restore registers */
+ ldmfd sp!, {r4,r5,r6,r7}
+ mov pc, lr
+
+ENDPROC(imx53_suspend)
+
+ENTRY(imx53_suspend_sz)
+ .word . - imx53_suspend
+++ /dev/null
-/*
- * linux/arch/arm/plat-mxc/time.c
- *
- * Copyright (C) 2000-2001 Deep Blue Solutions
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/sched_clock.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "hardware.h"
-
-/*
- * There are 2 versions of the timer hardware on Freescale MXC hardware.
- * Version 1: MX1/MXL, MX21, MX27.
- * Version 2: MX25, MX31, MX35, MX37, MX51
- */
-
-/* defines common for all i.MX */
-#define MXC_TCTL 0x00
-#define MXC_TCTL_TEN (1 << 0) /* Enable module */
-#define MXC_TPRER 0x04
-
-/* MX1, MX21, MX27 */
-#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
-#define MX1_2_TCTL_IRQEN (1 << 4)
-#define MX1_2_TCTL_FRR (1 << 8)
-#define MX1_2_TCMP 0x08
-#define MX1_2_TCN 0x10
-#define MX1_2_TSTAT 0x14
-
-/* MX21, MX27 */
-#define MX2_TSTAT_CAPT (1 << 1)
-#define MX2_TSTAT_COMP (1 << 0)
-
-/* MX31, MX35, MX25, MX5, MX6 */
-#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
-#define V2_TCTL_CLK_IPG (1 << 6)
-#define V2_TCTL_CLK_PER (2 << 6)
-#define V2_TCTL_CLK_OSC_DIV8 (5 << 6)
-#define V2_TCTL_FRR (1 << 9)
-#define V2_TCTL_24MEN (1 << 10)
-#define V2_TPRER_PRE24M 12
-#define V2_IR 0x0c
-#define V2_TSTAT 0x08
-#define V2_TSTAT_OF1 (1 << 0)
-#define V2_TCN 0x24
-#define V2_TCMP 0x10
-
-#define V2_TIMER_RATE_OSC_DIV8 3000000
-
-#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
-#define timer_is_v2() (!timer_is_v1())
-
-static struct clock_event_device clockevent_mxc;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-static void __iomem *timer_base;
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- if (timer_is_v2())
- __raw_writel(0, timer_base + V2_IR);
- else {
- tmp = __raw_readl(timer_base + MXC_TCTL);
- __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
- }
-}
-
-static inline void gpt_irq_enable(void)
-{
- if (timer_is_v2())
- __raw_writel(1<<0, timer_base + V2_IR);
- else {
- __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
- timer_base + MXC_TCTL);
- }
-}
-
-static void gpt_irq_acknowledge(void)
-{
- if (timer_is_v1()) {
- if (cpu_is_mx1())
- __raw_writel(0, timer_base + MX1_2_TSTAT);
- else
- __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
- timer_base + MX1_2_TSTAT);
- } else if (timer_is_v2())
- __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
-}
-
-static void __iomem *sched_clock_reg;
-
-static u64 notrace mxc_read_sched_clock(void)
-{
- return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-}
-
-static struct delay_timer imx_delay_timer;
-
-static unsigned long imx_read_current_timer(void)
-{
- return __raw_readl(sched_clock_reg);
-}
-
-static int __init mxc_clocksource_init(struct clk *timer_clk)
-{
- unsigned int c = clk_get_rate(timer_clk);
- void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
-
- imx_delay_timer.read_current_timer = &imx_read_current_timer;
- imx_delay_timer.freq = c;
- register_current_timer_delay(&imx_delay_timer);
-
- sched_clock_reg = reg;
-
- sched_clock_register(mxc_read_sched_clock, 32, c);
- return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
- clocksource_mmio_readl_up);
-}
-
-/* clock event */
-
-static int mx1_2_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
-
- __raw_writel(tcmp, timer_base + MX1_2_TCMP);
-
- return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
- -ETIME : 0;
-}
-
-static int v2_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = __raw_readl(timer_base + V2_TCN) + evt;
-
- __raw_writel(tcmp, timer_base + V2_TCMP);
-
- return evt < 0x7fffffff &&
- (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
- -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[] = {
- [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
- [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
- [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
- [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED",
- [CLOCK_EVT_MODE_RESUME] = "CLOCK_EVT_MODE_RESUME",
-};
-#endif /* DEBUG */
-
-static void mxc_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call mxc_set_next_event()
- */
- local_irq_save(flags);
-
- /* Disable interrupt in GPT module */
- gpt_irq_disable();
-
- if (mode != clockevent_mode) {
- /* Set event time into far-far future */
- if (timer_is_v2())
- __raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
- timer_base + V2_TCMP);
- else
- __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
- timer_base + MX1_2_TCMP);
-
- /* Clear pending interrupt */
- gpt_irq_acknowledge();
- }
-
-#ifdef DEBUG
- printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
- clock_event_mode_label[clockevent_mode],
- clock_event_mode_label[mode]);
-#endif /* DEBUG */
-
- /* Remember timer mode */
- clockevent_mode = mode;
- local_irq_restore(flags);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
- "supported for i.MX\n");
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /*
- * Do not put overhead of interrupt enable/disable into
- * mxc_set_next_event(), the core has about 4 minutes
- * to call mxc_set_next_event() or shutdown clock after
- * mode switching
- */
- local_irq_save(flags);
- gpt_irq_enable();
- local_irq_restore(flags);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- /* Left event sources disabled, no more interrupts appear */
- break;
- }
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_mxc;
- uint32_t tstat;
-
- if (timer_is_v2())
- tstat = __raw_readl(timer_base + V2_TSTAT);
- else
- tstat = __raw_readl(timer_base + MX1_2_TSTAT);
-
- gpt_irq_acknowledge();
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction mxc_timer_irq = {
- .name = "i.MX Timer Tick",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = mxc_timer_interrupt,
-};
-
-static struct clock_event_device clockevent_mxc = {
- .name = "mxc_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = mxc_set_mode,
- .set_next_event = mx1_2_set_next_event,
- .rating = 200,
-};
-
-static int __init mxc_clockevent_init(struct clk *timer_clk)
-{
- if (timer_is_v2())
- clockevent_mxc.set_next_event = v2_set_next_event;
-
- clockevent_mxc.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clockevent_mxc,
- clk_get_rate(timer_clk),
- 0xff, 0xfffffffe);
-
- return 0;
-}
-
-static void __init _mxc_timer_init(int irq,
- struct clk *clk_per, struct clk *clk_ipg)
-{
- uint32_t tctl_val;
-
- if (IS_ERR(clk_per)) {
- pr_err("i.MX timer: unable to get clk\n");
- return;
- }
-
- if (!IS_ERR(clk_ipg))
- clk_prepare_enable(clk_ipg);
-
- clk_prepare_enable(clk_per);
-
- /*
- * Initialise to a known state (all timers off, and timing reset)
- */
-
- __raw_writel(0, timer_base + MXC_TCTL);
- __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
-
- if (timer_is_v2()) {
- tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
- if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) {
- tctl_val |= V2_TCTL_CLK_OSC_DIV8;
- if (cpu_is_imx6dl() || cpu_is_imx6sx()) {
- /* 24 / 8 = 3 MHz */
- __raw_writel(7 << V2_TPRER_PRE24M,
- timer_base + MXC_TPRER);
- tctl_val |= V2_TCTL_24MEN;
- }
- } else {
- tctl_val |= V2_TCTL_CLK_PER;
- }
- } else {
- tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
- }
-
- __raw_writel(tctl_val, timer_base + MXC_TCTL);
-
- /* init and register the timer to the framework */
- mxc_clocksource_init(clk_per);
- mxc_clockevent_init(clk_per);
-
- /* Make irqs happen */
- setup_irq(irq, &mxc_timer_irq);
-}
-
-void __init mxc_timer_init(void __iomem *base, int irq)
-{
- struct clk *clk_per = clk_get_sys("imx-gpt.0", "per");
- struct clk *clk_ipg = clk_get_sys("imx-gpt.0", "ipg");
-
- timer_base = base;
-
- _mxc_timer_init(irq, clk_per, clk_ipg);
-}
-
-static void __init mxc_timer_init_dt(struct device_node *np)
-{
- struct clk *clk_per, *clk_ipg;
- int irq;
-
- if (timer_base)
- return;
-
- timer_base = of_iomap(np, 0);
- WARN_ON(!timer_base);
- irq = irq_of_parse_and_map(np, 0);
-
- clk_ipg = of_clk_get_by_name(np, "ipg");
-
- /* Try osc_per first, and fall back to per otherwise */
- clk_per = of_clk_get_by_name(np, "osc_per");
- if (IS_ERR(clk_per))
- clk_per = of_clk_get_by_name(np, "per");
-
- _mxc_timer_init(irq, clk_per, clk_ipg);
-}
-CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx25_timer, "fsl,imx25-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx50_timer, "fsl,imx50-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx51_timer, "fsl,imx51-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx53_timer, "fsl,imx53-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx6q_timer, "fsl,imx6q-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx6sl_timer, "fsl,imx6sl-gpt", mxc_timer_init_dt);
-CLOCKSOURCE_OF_DECLARE(mx6sx_timer, "fsl,imx6sx-gpt", mxc_timer_init_dt);
case IOP13XX_CORE_FREQ_1200:
return 1200000000;
default:
- printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
+ printk("%s: warning unknown frequency, defaulting to 800MHz\n",
__func__);
}
/*
* Clock Speed Definitions.
*/
-#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */
#define IXP4XX_UART_XTAL 14745600
/*
#include <asm/sizes.h>
/*
- * Clocks are derived from MCLK, which is 25Mhz
+ * Clocks are derived from MCLK, which is 25MHz
*/
#define KS8695_CLOCK_RATE 25000000
--- /dev/null
+obj-y += board-dt.o
--- /dev/null
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
--- /dev/null
+/*
+ * Device Tree board file for NXP LPC18xx/43xx
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const lpc18xx_43xx_compat[] __initconst = {
+ "nxp,lpc1850",
+ "nxp,lpc4350",
+ "nxp,lpc4370",
+ NULL
+};
+
+DT_MACHINE_START(LPC18XXDT, "NXP LPC18xx/43xx (Device Tree)")
+ .dt_compat = lpc18xx_43xx_compat,
+MACHINE_END
ENTRY(mvebu_cortex_a9_secondary_startup)
ARM_BE8(setend be)
- bl v7_invalidate_l1
bl armada_38x_scu_power_up
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)
#include <asm/assembler.h>
#include <mach/board-ams-delta.h>
-
-#include <mach/irqs.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"
+#include "soc.h"
/*
* GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
.init_time = omap1_timer_init,
.map_io = omap_fsample_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_fsample_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_generic_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = h2_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
#include <linux/i2c/tps65010.h>
+#include "common.h"
#include "board-h3.h"
#include "mmc.h"
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = htcherald_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = htcherald_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = innovator_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = innovator_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_nokia770_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_palmte_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_palmz71_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap_perseus2_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_perseus2_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
+ .handle_irq = omap1_handle_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
#include <linux/i2c-omap.h>
#include <linux/reboot.h>
+#include <asm/exception.h>
+
#include <plat/i2c.h>
#include <mach/irqs.h>
+#include "soc.h"
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
#else
void omap1_init_early(void);
void omap1_init_irq(void);
+void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs);
void omap1_init_late(void);
void omap1_restart(enum reboot_mode, const char *);
}
#endif
-extern u32 omap_irq_flags;
-
#ifdef CONFIG_ARCH_OMAP16XX
extern int ocpi_enable(void);
#else
#include <linux/omap-dma.h>
#include <mach/tc.h>
-#include <mach/irqs.h>
+#include "soc.h"
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
#include <mach/irqs.h>
+#include "soc.h"
+
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
#define OMAP1610_GPIO3_BASE 0xfffbb400
#include <mach/irqs.h>
+#include "soc.h"
+
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
#define OMAP7XX_GPIO3_BASE 0xfffbd000
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
-#define OMAP1_INT_I2C (32 + 4)
static const char name[] = "omap_i2c";
res[0].start = OMAP1_I2C_BASE;
res[0].end = res[0].start + OMAP_I2C_SIZE;
res[0].flags = IORESOURCE_MEM;
- res[1].start = OMAP1_INT_I2C;
+ res[1].start = INT_I2C;
res[1].flags = IORESOURCE_IRQ;
pdev->resource = res;
+++ /dev/null
-/*
- * arch/arm/mach-omap1/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
- ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
- ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET]
- mov \irqstat, #0xffffffff
- bic \tmp, \irqstat, \tmp
- tst \irqnr, \tmp
- beq 1510f
-
- ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
- ldr \tmp, =omap_irq_flags @ irq flags address
- ldr \tmp, [\tmp, #0] @ irq flags value
- cmp \irqnr, #0
- ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
- cmpeq \irqnr, \tmp
- ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
- ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
- addeqs \irqnr, \irqnr, #32
-1510:
- .endm
-
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*
*/
-#define INT_CAMERA 1
-#define INT_FIQ 3
-#define INT_RTDX 6
-#define INT_DSP_MMU_ABORT 7
-#define INT_HOST 8
-#define INT_ABORT 9
-#define INT_BRIDGE_PRIV 13
-#define INT_GPIO_BANK1 14
-#define INT_UART3 15
-#define INT_TIMER3 16
-#define INT_DMA_CH0_6 19
-#define INT_DMA_CH1_7 20
-#define INT_DMA_CH2_8 21
-#define INT_DMA_CH3 22
-#define INT_DMA_CH4 23
-#define INT_DMA_CH5 24
-#define INT_TIMER1 26
-#define INT_WD_TIMER 27
-#define INT_BRIDGE_PUB 28
-#define INT_TIMER2 30
-#define INT_LCD_CTRL 31
+#define INT_CAMERA (NR_IRQS_LEGACY + 1)
+#define INT_FIQ (NR_IRQS_LEGACY + 3)
+#define INT_RTDX (NR_IRQS_LEGACY + 6)
+#define INT_DSP_MMU_ABORT (NR_IRQS_LEGACY + 7)
+#define INT_HOST (NR_IRQS_LEGACY + 8)
+#define INT_ABORT (NR_IRQS_LEGACY + 9)
+#define INT_BRIDGE_PRIV (NR_IRQS_LEGACY + 13)
+#define INT_GPIO_BANK1 (NR_IRQS_LEGACY + 14)
+#define INT_UART3 (NR_IRQS_LEGACY + 15)
+#define INT_TIMER3 (NR_IRQS_LEGACY + 16)
+#define INT_DMA_CH0_6 (NR_IRQS_LEGACY + 19)
+#define INT_DMA_CH1_7 (NR_IRQS_LEGACY + 20)
+#define INT_DMA_CH2_8 (NR_IRQS_LEGACY + 21)
+#define INT_DMA_CH3 (NR_IRQS_LEGACY + 22)
+#define INT_DMA_CH4 (NR_IRQS_LEGACY + 23)
+#define INT_DMA_CH5 (NR_IRQS_LEGACY + 24)
+#define INT_TIMER1 (NR_IRQS_LEGACY + 26)
+#define INT_WD_TIMER (NR_IRQS_LEGACY + 27)
+#define INT_BRIDGE_PUB (NR_IRQS_LEGACY + 28)
+#define INT_TIMER2 (NR_IRQS_LEGACY + 30)
+#define INT_LCD_CTRL (NR_IRQS_LEGACY + 31)
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 1
*/
-#define INT_1510_IH2_IRQ 0
-#define INT_1510_RES2 2
-#define INT_1510_SPI_TX 4
-#define INT_1510_SPI_RX 5
-#define INT_1510_DSP_MAILBOX1 10
-#define INT_1510_DSP_MAILBOX2 11
-#define INT_1510_RES12 12
-#define INT_1510_LB_MMU 17
-#define INT_1510_RES18 18
-#define INT_1510_LOCAL_BUS 29
+#define INT_1510_IH2_IRQ (NR_IRQS_LEGACY + 0)
+#define INT_1510_RES2 (NR_IRQS_LEGACY + 2)
+#define INT_1510_SPI_TX (NR_IRQS_LEGACY + 4)
+#define INT_1510_SPI_RX (NR_IRQS_LEGACY + 5)
+#define INT_1510_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
+#define INT_1510_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
+#define INT_1510_RES12 (NR_IRQS_LEGACY + 12)
+#define INT_1510_LB_MMU (NR_IRQS_LEGACY + 17)
+#define INT_1510_RES18 (NR_IRQS_LEGACY + 18)
+#define INT_1510_LOCAL_BUS (NR_IRQS_LEGACY + 29)
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ 2
-#define INT_1610_McBSP2_TX 4
-#define INT_1610_McBSP2_RX 5
-#define INT_1610_DSP_MAILBOX1 10
-#define INT_1610_DSP_MAILBOX2 11
-#define INT_1610_LCD_LINE 12
-#define INT_1610_GPTIMER1 17
-#define INT_1610_GPTIMER2 18
-#define INT_1610_SSR_FIFO_0 29
+#define INT_1610_IH2_FIQ (NR_IRQS_LEGACY + 2)
+#define INT_1610_McBSP2_TX (NR_IRQS_LEGACY + 4)
+#define INT_1610_McBSP2_RX (NR_IRQS_LEGACY + 5)
+#define INT_1610_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10)
+#define INT_1610_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11)
+#define INT_1610_LCD_LINE (NR_IRQS_LEGACY + 12)
+#define INT_1610_GPTIMER1 (NR_IRQS_LEGACY + 17)
+#define INT_1610_GPTIMER2 (NR_IRQS_LEGACY + 18)
+#define INT_1610_SSR_FIFO_0 (NR_IRQS_LEGACY + 29)
/*
* OMAP-7xx specific IRQ numbers for interrupt handler 1
*/
-#define INT_7XX_IH2_FIQ 0
-#define INT_7XX_IH2_IRQ 1
-#define INT_7XX_USB_NON_ISO 2
-#define INT_7XX_USB_ISO 3
-#define INT_7XX_ICR 4
-#define INT_7XX_EAC 5
-#define INT_7XX_GPIO_BANK1 6
-#define INT_7XX_GPIO_BANK2 7
-#define INT_7XX_GPIO_BANK3 8
-#define INT_7XX_McBSP2TX 10
-#define INT_7XX_McBSP2RX 11
-#define INT_7XX_McBSP2RX_OVF 12
-#define INT_7XX_LCD_LINE 14
-#define INT_7XX_GSM_PROTECT 15
-#define INT_7XX_TIMER3 16
-#define INT_7XX_GPIO_BANK5 17
-#define INT_7XX_GPIO_BANK6 18
-#define INT_7XX_SPGIO_WR 29
+#define INT_7XX_IH2_FIQ (NR_IRQS_LEGACY + 0)
+#define INT_7XX_IH2_IRQ (NR_IRQS_LEGACY + 1)
+#define INT_7XX_USB_NON_ISO (NR_IRQS_LEGACY + 2)
+#define INT_7XX_USB_ISO (NR_IRQS_LEGACY + 3)
+#define INT_7XX_ICR (NR_IRQS_LEGACY + 4)
+#define INT_7XX_EAC (NR_IRQS_LEGACY + 5)
+#define INT_7XX_GPIO_BANK1 (NR_IRQS_LEGACY + 6)
+#define INT_7XX_GPIO_BANK2 (NR_IRQS_LEGACY + 7)
+#define INT_7XX_GPIO_BANK3 (NR_IRQS_LEGACY + 8)
+#define INT_7XX_McBSP2TX (NR_IRQS_LEGACY + 10)
+#define INT_7XX_McBSP2RX (NR_IRQS_LEGACY + 11)
+#define INT_7XX_McBSP2RX_OVF (NR_IRQS_LEGACY + 12)
+#define INT_7XX_LCD_LINE (NR_IRQS_LEGACY + 14)
+#define INT_7XX_GSM_PROTECT (NR_IRQS_LEGACY + 15)
+#define INT_7XX_TIMER3 (NR_IRQS_LEGACY + 16)
+#define INT_7XX_GPIO_BANK5 (NR_IRQS_LEGACY + 17)
+#define INT_7XX_GPIO_BANK6 (NR_IRQS_LEGACY + 18)
+#define INT_7XX_SPGIO_WR (NR_IRQS_LEGACY + 29)
/*
* IRQ numbers for interrupt handler 2
*
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*/
-#define IH2_BASE 32
+#define IH2_BASE (NR_IRQS_LEGACY + 32)
#define INT_KEYBOARD (1 + IH2_BASE)
#define INT_uWireTX (2 + IH2_BASE)
#endif
#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-#define NR_IRQS OMAP_FPGA_IRQ_END
-
-#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
-
-#include <mach/hardware.h>
+#define OMAP_IRQ_BIT(irq) (1 << ((irq - NR_IRQS_LEGACY) % 32))
#ifdef CONFIG_FIQ
#define FIQ_START 1024
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
+/* REVISIT: omap1 legacy drivers still rely on this */
+#include <mach/soc.h>
+
/*
* Bus address is physical address, except for OMAP-1510 Local Bus.
* OMAP-1510 bus address is translated into a Local Bus address if the
* because of the strncmp().
*/
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <mach/soc.h>
/*
* OMAP-1510 Local Bus address offset
*/
#define OMAP_UART_INFO_OFS 0x3ffc
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE 0xfffb0000
-#define OMAP1_UART2_BASE 0xfffb0800
-#define OMAP1_UART3_BASE 0xfffb9800
-
#define OMAP_PORT_SHIFT 2
#define OMAP7XX_PORT_SHIFT 0
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
#include <linux/io.h>
#include <asm/irq.h>
+#include <asm/exception.h>
#include <asm/mach/irq.h>
#include "soc.h"
struct omap_irq_bank {
unsigned long base_reg;
+ void __iomem *va;
unsigned long trigger_map;
unsigned long wake_enable;
};
-u32 omap_irq_flags;
+static u32 omap_l2_irq;
static unsigned int irq_bank_count;
static struct omap_irq_bank *irq_banks;
+static struct irq_domain *domain;
-static inline void irq_bank_writel(unsigned long value, int bank, int offset)
-{
- omap_writel(value, irq_banks[bank].base_reg + offset);
-}
-
-static void omap_ack_irq(struct irq_data *d)
+static inline unsigned int irq_bank_readl(int bank, int offset)
{
- if (d->irq > 31)
- omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
-
- omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
+ return readl_relaxed(irq_banks[bank].va + offset);
}
-
-static void omap_mask_irq(struct irq_data *d)
+static inline void irq_bank_writel(unsigned long value, int bank, int offset)
{
- int bank = IRQ_BANK(d->irq);
- u32 l;
-
- l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
- l |= 1 << IRQ_BIT(d->irq);
- omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+ writel_relaxed(value, irq_banks[bank].va + offset);
}
-static void omap_unmask_irq(struct irq_data *d)
+static void omap_ack_irq(int irq)
{
- int bank = IRQ_BANK(d->irq);
- u32 l;
+ if (irq > 31)
+ writel_relaxed(0x1, irq_banks[1].va + IRQ_CONTROL_REG_OFFSET);
- l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
- l &= ~(1 << IRQ_BIT(d->irq));
- omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+ writel_relaxed(0x1, irq_banks[0].va + IRQ_CONTROL_REG_OFFSET);
}
static void omap_mask_ack_irq(struct irq_data *d)
{
- omap_mask_irq(d);
- omap_ack_irq(d);
-}
-
-static int omap_wake_irq(struct irq_data *d, unsigned int enable)
-{
- int bank = IRQ_BANK(d->irq);
-
- if (enable)
- irq_banks[bank].wake_enable |= IRQ_BIT(d->irq);
- else
- irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq);
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
- return 0;
+ ct->chip.irq_mask(d);
+ omap_ack_irq(d->irq);
}
-
/*
* Allows tuning the IRQ type and priority
*
};
#endif
-static struct irq_chip omap_irq_chip = {
- .name = "MPU",
- .irq_ack = omap_mask_ack_irq,
- .irq_mask = omap_mask_irq,
- .irq_unmask = omap_unmask_irq,
- .irq_set_wake = omap_wake_irq,
-};
+asmlinkage void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs)
+{
+ void __iomem *l1 = irq_banks[0].va;
+ void __iomem *l2 = irq_banks[1].va;
+ u32 irqnr;
+
+ do {
+ irqnr = readl_relaxed(l1 + IRQ_ITR_REG_OFFSET);
+ irqnr &= ~(readl_relaxed(l1 + IRQ_MIR_REG_OFFSET) & 0xffffffff);
+ if (!irqnr)
+ break;
+
+ irqnr = readl_relaxed(l1 + IRQ_SIR_FIQ_REG_OFFSET);
+ if (irqnr)
+ goto irq;
+
+ irqnr = readl_relaxed(l1 + IRQ_SIR_IRQ_REG_OFFSET);
+ if (irqnr == omap_l2_irq) {
+ irqnr = readl_relaxed(l2 + IRQ_SIR_IRQ_REG_OFFSET);
+ if (irqnr)
+ irqnr += 32;
+ }
+irq:
+ if (irqnr)
+ handle_domain_irq(domain, irqnr, regs);
+ else
+ break;
+ } while (irqnr);
+}
+
+static __init void
+omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("MPU", 1, irq_start, base,
+ handle_level_irq);
+ ct = gc->chip_types;
+ ct->chip.irq_ack = omap_mask_ack_irq;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->regs.mask = IRQ_MIR_REG_OFFSET;
+ irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+}
void __init omap1_init_irq(void)
{
- int i, j;
+ struct irq_chip_type *ct;
+ struct irq_data *d = NULL;
+ int i, j, irq_base;
+ unsigned long nr_irqs;
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
if (cpu_is_omap7xx()) {
- omap_irq_flags = INT_7XX_IH2_IRQ;
irq_banks = omap7xx_irq_banks;
irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
}
#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
- omap_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap1510_irq_banks;
irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
}
if (cpu_is_omap310()) {
- omap_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap310_irq_banks;
irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (cpu_is_omap16xx()) {
- omap_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap1610_irq_banks;
irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
}
#endif
- printk("Total of %i interrupts in %i interrupt banks\n",
- irq_bank_count * 32, irq_bank_count);
+
+ for (i = 0; i < irq_bank_count; i++) {
+ irq_banks[i].va = ioremap(irq_banks[i].base_reg, 0xff);
+ if (WARN_ON(!irq_banks[i].va))
+ return;
+ }
+
+ nr_irqs = irq_bank_count * 32;
+
+ irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+ if (irq_base < 0) {
+ pr_warn("Couldn't allocate IRQ numbers\n");
+ irq_base = 0;
+ }
+ omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base;
+ omap_l2_irq -= NR_IRQS_LEGACY;
+
+ domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
+ pr_info("Total of %lu interrupts in %i interrupt banks\n",
+ nr_irqs, irq_bank_count);
/* Mask and clear all interrupts */
for (i = 0; i < irq_bank_count; i++) {
irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
omap_irq_set_cfg(j, 0, 0, irq_trigger);
-
- irq_set_chip_and_handler(j, &omap_irq_chip,
- handle_level_irq);
set_irq_flags(j, IRQF_VALID);
}
+ omap_alloc_gc(irq_banks[i].va, irq_base + i * 32, 32);
}
/* Unmask level 2 handler */
-
- if (cpu_is_omap7xx())
- omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ));
- else if (cpu_is_omap15xx())
- omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ));
- else if (cpu_is_omap16xx())
- omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ));
+ d = irq_get_irq_data(irq_find_mapping(domain, omap_l2_irq));
+ if (d) {
+ ct = irq_data_get_chip_type(d);
+ ct->chip.irq_unmask(d);
+ }
}
static struct omap_mux_cfg arch_mux_cfg;
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct pin_config __initdata_or_module omap7xx_pins[] = {
+static struct pin_config omap7xx_pins[] = {
MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0)
MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0)
MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0)
#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-static struct pin_config __initdata_or_module omap1xxx_pins[] = {
+static struct pin_config omap1xxx_pins[] = {
/*
* description mux mode mux pull pull pull pu_pd pu dbg
* reg offset mode reg bit ena reg
#define OMAP1XXX_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
-static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+static int omap1_cfg_reg(const struct pin_config *cfg)
{
static DEFINE_SPINLOCK(mux_spin_lock);
unsigned long flags;
/*
* Sets the Omap MUX and PULL_DWN registers based on the table
*/
-int __init_or_module omap_cfg_reg(const unsigned long index)
+int omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
#include "iomap.h"
#include "clock.h"
#include "pm.h"
+#include "soc.h"
#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
#include <mach/mux.h>
#include "pm.h"
+#include "soc.h"
static struct clk * uart1_ck;
static struct clk * uart2_ck;
#include <linux/platform_device.h>
#include <linux/platform_data/dmtimer-omap.h>
-#include <mach/irqs.h>
-
#include <plat/dmtimer.h>
+#include "soc.h"
+
#define OMAP1610_GPTIMER1_BASE 0xfffb1400
#define OMAP1610_GPTIMER2_BASE 0xfffb1c00
#define OMAP1610_GPTIMER3_BASE 0xfffb2400
depends on ARCH_OMAP2 && SOC_OMAP2420
default y if MACH_NOKIA_N8X0
-config MACH_OMAP3_BEAGLE
- bool "OMAP3 BEAGLE board"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CBB
-
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3
for full description please see the products webpage at
http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
-config MACH_OVERO
- bool "Gumstix Overo board"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CBB
-
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
-config MACH_CM_T35
- bool "CompuLab CM-T35/CM-T3730 modules"
- depends on ARCH_OMAP3
- default y
- select MACH_CM_T3730
- select OMAP_PACKAGE_CUS
-
-config MACH_CM_T3730
- bool
-
config OMAP3_SDRC_AC_TIMING
bool "Enable SDRC AC timing register changes"
depends on ARCH_OMAP3
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
-obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
-obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
# Platform specific device init code
+++ /dev/null
-/*
- * CompuLab CM-T35/CM-T3730 modules support
- *
- * Copyright (C) 2009-2011 CompuLab, Ltd.
- * Authors: Mike Rapoport <mike@compulab.co.il>
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/omap-gpmc.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <linux/platform_data/at24.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/tdo24m.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define CM_T35_GPIO_PENDOWN 57
-#define SB_T35_USB_HUB_RESET_GPIO 167
-
-#define CM_T35_SMSC911X_CS 5
-#define CM_T35_SMSC911X_GPIO 163
-#define SB_T35_SMSC911X_CS 4
-#define SB_T35_SMSC911X_GPIO 65
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
- .id = 0,
- .cs = CM_T35_SMSC911X_CS,
- .gpio_irq = CM_T35_SMSC911X_GPIO,
- .gpio_reset = -EINVAL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
- .id = 1,
- .cs = SB_T35_SMSC911X_CS,
- .gpio_irq = SB_T35_SMSC911X_GPIO,
- .gpio_reset = -EINVAL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init cm_t35_init_ethernet(void)
-{
- regulator_register_fixed(0, cm_t35_smsc911x_supplies,
- ARRAY_SIZE(cm_t35_smsc911x_supplies));
- regulator_register_fixed(1, sb_t35_smsc911x_supplies,
- ARRAY_SIZE(sb_t35_smsc911x_supplies));
-
- gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
- gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
-}
-#else
-static inline void __init cm_t35_init_ethernet(void) { return; }
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led cm_t35_leds[] = {
- [0] = {
- .gpio = 186,
- .name = "cm-t35:green",
- .default_trigger = "heartbeat",
- .active_low = 0,
- },
-};
-
-static struct gpio_led_platform_data cm_t35_led_pdata = {
- .num_leds = ARRAY_SIZE(cm_t35_leds),
- .leds = cm_t35_leds,
-};
-
-static struct platform_device cm_t35_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &cm_t35_led_pdata,
- },
-};
-
-static void __init cm_t35_init_led(void)
-{
- platform_device_register(&cm_t35_led_device);
-}
-#else
-static inline void cm_t35_init_led(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-static struct mtd_partition cm_t35_nand_partitions[] = {
- {
- .name = "xloader",
- .offset = 0, /* Offset = 0x00000 */
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE
- },
- {
- .name = "uboot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 15 * NAND_BLOCK_SIZE,
- },
- {
- .name = "uboot environment",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
- .size = 2 * NAND_BLOCK_SIZE,
- },
- {
- .name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct omap_nand_platform_data cm_t35_nand_data = {
- .parts = cm_t35_nand_partitions,
- .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
- .cs = 0,
-};
-
-static void __init cm_t35_init_nand(void)
-{
- if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
- pr_err("CM-T35: Unable to register NAND device\n");
-}
-#else
-static inline void cm_t35_init_nand(void) {}
-#endif
-
-#define CM_T35_LCD_EN_GPIO 157
-#define CM_T35_LCD_BL_GPIO 58
-#define CM_T35_DVI_EN_GPIO 54
-
-static const struct display_timing cm_t35_lcd_videomode = {
- .pixelclock = { 0, 26000000, 0 },
-
- .hactive = { 0, 480, 0 },
- .hfront_porch = { 0, 104, 0 },
- .hback_porch = { 0, 8, 0 },
- .hsync_len = { 0, 8, 0 },
-
- .vactive = { 0, 640, 0 },
- .vfront_porch = { 0, 4, 0 },
- .vback_porch = { 0, 2, 0 },
- .vsync_len = { 0, 2, 0 },
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
- DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
-};
-
-static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
- .name = "lcd",
- .source = "dpi.0",
-
- .data_lines = 18,
-
- .display_timing = &cm_t35_lcd_videomode,
-
- .enable_gpio = -1,
- .backlight_gpio = CM_T35_LCD_BL_GPIO,
-};
-
-static struct platform_device cm_t35_lcd_device = {
- .name = "panel-dpi",
- .id = 0,
- .dev.platform_data = &cm_t35_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = -1,
-};
-
-static struct platform_device cm_t35_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &cm_t35_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = CM_T35_DVI_EN_GPIO,
-};
-
-static struct platform_device cm_t35_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &cm_t35_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data cm_t35_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device cm_t35_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &cm_t35_tv_pdata,
-};
-
-static struct omap_dss_board_info cm_t35_dss_data = {
- .default_display_name = "dvi",
-};
-
-static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
- .turbo_mode = 0,
-};
-
-static struct tdo24m_platform_data tdo24m_config = {
- .model = TDO35S,
-};
-
-static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
- {
- .modalias = "tdo24m",
- .bus_num = 4,
- .chip_select = 0,
- .max_speed_hz = 1000000,
- .controller_data = &tdo24m_mcspi_config,
- .platform_data = &tdo24m_config,
- },
-};
-
-static void __init cm_t35_init_display(void)
-{
- int err;
-
- spi_register_board_info(cm_t35_lcd_spi_board_info,
- ARRAY_SIZE(cm_t35_lcd_spi_board_info));
-
-
- err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
- "lcd bl enable");
- if (err) {
- pr_err("CM-T35: failed to request LCD EN GPIO\n");
- return;
- }
-
- msleep(50);
- gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
-
- err = omap_display_init(&cm_t35_dss_data);
- if (err) {
- pr_err("CM-T35: failed to register DSS device\n");
- gpio_free(CM_T35_LCD_EN_GPIO);
- }
-
- platform_device_register(&cm_t35_tfp410_device);
- platform_device_register(&cm_t35_dvi_connector_device);
- platform_device_register(&cm_t35_lcd_device);
- platform_device_register(&cm_t35_tv_connector_device);
-}
-
-static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
- REGULATOR_SUPPLY("vcc", "spi1.0"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data cm_t35_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply),
- .consumer_supplies = cm_t35_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data cm_t35_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply),
- .consumer_supplies = cm_t35_vsim_supply,
-};
-
-static struct regulator_init_data cm_t35_vio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE,
- },
- .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies),
- .consumer_supplies = cm_t35_vio_supplies,
-};
-
-static uint32_t cm_t35_keymap[] = {
- KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT),
- KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN),
- KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D),
-};
-
-static struct matrix_keymap_data cm_t35_keymap_data = {
- .keymap = cm_t35_keymap,
- .keymap_size = ARRAY_SIZE(cm_t35_keymap),
-};
-
-static struct twl4030_keypad_data cm_t35_kp_data = {
- .keymap_data = &cm_t35_keymap_data,
- .rows = 3,
- .cols = 3,
- .rep = 1,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .deferred = true,
- },
- {
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA,
- .transceiver = 1,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .ocr_mask = 0x00100000, /* 3.3V */
- },
- {} /* Terminator */
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 1,
- .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
- .vcc_gpio = -EINVAL,
- },
- {
- .port = 2,
- .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void __init cm_t35_init_usbh(void)
-{
- int err;
-
- err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
- GPIOF_OUT_INIT_LOW, "usb hub rst");
- if (err) {
- pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
- } else {
- udelay(10);
- gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
- msleep(1);
- }
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
-}
-
-static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
- unsigned ngpio)
-{
- int wlan_rst = gpio + 2;
-
- if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
- gpio_export(wlan_rst, 0);
- udelay(10);
- gpio_set_value_cansleep(wlan_rst, 0);
- udelay(10);
- gpio_set_value_cansleep(wlan_rst, 1);
- } else {
- pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
- }
-
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
- .setup = cm_t35_twl_gpio_setup,
-};
-
-static struct twl4030_power_data cm_t35_power_data = {
- .use_poweroff = true,
-};
-
-static struct twl4030_platform_data cm_t35_twldata = {
- /* platform_data for children goes here */
- .keypad = &cm_t35_kp_data,
- .gpio = &cm_t35_gpio_data,
- .vmmc1 = &cm_t35_vmmc1,
- .vsim = &cm_t35_vsim,
- .vio = &cm_t35_vio,
- .power = &cm_t35_power_data,
-};
-
-#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
-#include <media/omap3isp.h>
-#include "devices.h"
-
-static struct isp_platform_subdev cm_t35_isp_subdevs[] = {
- {
- .board_info = &(struct i2c_board_info){
- I2C_BOARD_INFO("mt9t001", 0x5d)
- },
- .i2c_adapter_id = 3,
- .bus = &(struct isp_bus_cfg){
- .interface = ISP_INTERFACE_PARALLEL,
- .bus = {
- .parallel = {
- .clk_pol = 1,
- },
- },
- },
- },
- {
- .board_info = &(struct i2c_board_info){
- I2C_BOARD_INFO("tvp5150", 0x5c),
- },
- .i2c_adapter_id = 3,
- .bus = &(struct isp_bus_cfg){
- .interface = ISP_INTERFACE_PARALLEL,
- .bus = {
- .parallel = {
- .clk_pol = 0,
- },
- },
- },
- },
- { 0 },
-};
-
-static struct isp_platform_data cm_t35_isp_pdata = {
- .subdevs = cm_t35_isp_subdevs,
-};
-
-static struct regulator_consumer_supply cm_t35_camera_supplies[] = {
- REGULATOR_SUPPLY("vaa", "3-005d"),
- REGULATOR_SUPPLY("vdd", "3-005d"),
-};
-
-static void __init cm_t35_init_camera(void)
-{
- struct clk *clk;
-
- clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT,
- 48000000);
- clk_register_clkdev(clk, NULL, "3-005d");
-
- regulator_register_fixed(2, cm_t35_camera_supplies,
- ARRAY_SIZE(cm_t35_camera_supplies));
-
- if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
- pr_warn("CM-T3x: Failed registering camera device!\n");
-}
-
-#else
-static inline void cm_t35_init_camera(void) {}
-#endif /* CONFIG_VIDEO_OMAP3 */
-
-static void __init cm_t35_init_i2c(void)
-{
- omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
- TWL_COMMON_REGULATOR_VDAC |
- TWL_COMMON_PDATA_AUDIO);
-
- omap3_pmic_init("tps65930", &cm_t35_twldata);
-
- omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* nCS and IRQ for CM-T35 ethernet */
- OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
- OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
- /* nCS and IRQ for SB-T35 ethernet */
- OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
- OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
- /* PENDOWN GPIO */
- OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
- /* mUSB */
- OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* MMC 2 */
- OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-
- /* McSPI 1 */
- OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-
- /* McSPI 4 */
- OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
-
- /* McBSP 2 */
- OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
- /* serial ports */
- OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
- OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- /* common DSS */
- OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
- /* Camera */
- OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
- OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
- OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
-
- /* display controls */
- OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
- /* TPS IRQ */
- OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
- OMAP_PIN_INPUT_PULLUP),
-
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static void __init cm_t3x_common_dss_mux_init(int mux_mode)
-{
- omap_mux_init_signal("dss_data18", mux_mode);
- omap_mux_init_signal("dss_data19", mux_mode);
- omap_mux_init_signal("dss_data20", mux_mode);
- omap_mux_init_signal("dss_data21", mux_mode);
- omap_mux_init_signal("dss_data22", mux_mode);
- omap_mux_init_signal("dss_data23", mux_mode);
-}
-
-static void __init cm_t35_init_mux(void)
-{
- int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT;
-
- omap_mux_init_signal("dss_data0.dss_data0", mux_mode);
- omap_mux_init_signal("dss_data1.dss_data1", mux_mode);
- omap_mux_init_signal("dss_data2.dss_data2", mux_mode);
- omap_mux_init_signal("dss_data3.dss_data3", mux_mode);
- omap_mux_init_signal("dss_data4.dss_data4", mux_mode);
- omap_mux_init_signal("dss_data5.dss_data5", mux_mode);
- cm_t3x_common_dss_mux_init(mux_mode);
-}
-
-static void __init cm_t3730_init_mux(void)
-{
- int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT;
-
- omap_mux_init_signal("sys_boot0", mux_mode);
- omap_mux_init_signal("sys_boot1", mux_mode);
- omap_mux_init_signal("sys_boot3", mux_mode);
- omap_mux_init_signal("sys_boot4", mux_mode);
- omap_mux_init_signal("sys_boot5", mux_mode);
- omap_mux_init_signal("sys_boot6", mux_mode);
- cm_t3x_common_dss_mux_init(mux_mode);
-}
-#else
-static inline void cm_t35_init_mux(void) {}
-static inline void cm_t3730_init_mux(void) {}
-#endif
-
-static void __init cm_t3x_common_init(void)
-{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- omap_hsmmc_init(mmc);
- cm_t35_init_i2c();
- omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
- cm_t35_init_ethernet();
- cm_t35_init_led();
- cm_t35_init_display();
- omap_twl4030_audio_init("cm-t3x", NULL);
-
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
- cm_t35_init_usbh();
- cm_t35_init_camera();
-}
-
-static void __init cm_t35_init(void)
-{
- cm_t3x_common_init();
- cm_t35_init_mux();
- cm_t35_init_nand();
-}
-
-static void __init cm_t3730_init(void)
-{
- cm_t3x_common_init();
- cm_t3730_init_mux();
-}
-
-MACHINE_START(CM_T35, "Compulab CM-T35")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = cm_t35_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = cm_t3730_init,
- .init_late = omap3630_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/board-omap3beagle.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pm_opp.h>
-#include <linux/cpu.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include "common.h"
-#include "omap_device.h"
-#include "gpmc.h"
-#include "soc.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define NAND_CS 0
-
-static struct pwm_lookup pwm_lookup[] = {
- /* LEDB -> PMU_STAT */
- PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat",
- 7812500, PWM_POLARITY_NORMAL),
-};
-
-static struct led_pwm pwm_leds[] = {
- {
- .name = "beagleboard::pmu_stat",
- .max_brightness = 127,
- .pwm_period_ns = 7812500,
- },
-};
-
-static struct led_pwm_platform_data pwm_data = {
- .num_leds = ARRAY_SIZE(pwm_leds),
- .leds = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
- .name = "leds_pwm",
- .id = -1,
- .dev = {
- .platform_data = &pwm_data,
- },
-};
-
-/*
- * OMAP3 Beagle revision
- * Run time detection of Beagle revision is done by reading GPIO.
- * GPIO ID -
- * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
- * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
- * C4 = GPIO173, GPIO172, GPIO171: 1 0 1
- * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
- * XMC = GPIO173, GPIO172, GPIO171: 0 1 0
- */
-enum {
- OMAP3BEAGLE_BOARD_UNKN = 0,
- OMAP3BEAGLE_BOARD_AXBX,
- OMAP3BEAGLE_BOARD_C1_3,
- OMAP3BEAGLE_BOARD_C4,
- OMAP3BEAGLE_BOARD_XM,
- OMAP3BEAGLE_BOARD_XMC,
-};
-
-static u8 omap3_beagle_version;
-
-/*
- * Board-specific configuration
- * Defaults to BeagleBoard-xMC
- */
-static struct {
- int mmc1_gpio_wp;
- bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */
- int dvi_pd_gpio;
- int usr_button_gpio;
- int mmc_caps;
-} beagle_config = {
- .mmc1_gpio_wp = -EINVAL,
- .usb_pwr_level = 0,
- .dvi_pd_gpio = -EINVAL,
- .usr_button_gpio = 4,
- .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-};
-
-static struct gpio omap3_beagle_rev_gpios[] __initdata = {
- { 171, GPIOF_IN, "rev_id_0" },
- { 172, GPIOF_IN, "rev_id_1" },
- { 173, GPIOF_IN, "rev_id_2" },
-};
-
-static void __init omap3_beagle_init_rev(void)
-{
- int ret;
- u16 beagle_rev = 0;
-
- omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
-
- ret = gpio_request_array(omap3_beagle_rev_gpios,
- ARRAY_SIZE(omap3_beagle_rev_gpios));
- if (ret < 0) {
- printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
- return;
- }
-
- beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
- | (gpio_get_value(173) << 2);
-
- gpio_free_array(omap3_beagle_rev_gpios,
- ARRAY_SIZE(omap3_beagle_rev_gpios));
-
- switch (beagle_rev) {
- case 7:
- printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
- beagle_config.mmc1_gpio_wp = 29;
- beagle_config.dvi_pd_gpio = 170;
- beagle_config.usr_button_gpio = 7;
- break;
- case 6:
- printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
- beagle_config.mmc1_gpio_wp = 23;
- beagle_config.dvi_pd_gpio = 170;
- beagle_config.usr_button_gpio = 7;
- break;
- case 5:
- printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
- beagle_config.mmc1_gpio_wp = 23;
- beagle_config.dvi_pd_gpio = 170;
- beagle_config.usr_button_gpio = 7;
- break;
- case 0:
- printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
- beagle_config.usb_pwr_level = 1;
- beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
- break;
- case 2:
- printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
- omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
- beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA;
- break;
- default:
- printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
- omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
- }
-}
-
-static struct mtd_partition omap3beagle_nand_partitions[] = {
- /* All the partition sizes are listed in terms of NAND block size */
- {
- .name = "X-Loader",
- .offset = 0,
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 15 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot Env",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
- .size = 1 * NAND_BLOCK_SIZE,
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "File System",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* DSS */
-
-static struct connector_dvi_platform_data beagle_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 3,
-};
-
-static struct platform_device beagle_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &beagle_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data beagle_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = -1,
-};
-
-static struct platform_device beagle_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &beagle_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data beagle_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device beagle_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &beagle_tv_pdata,
-};
-
-static struct omap_dss_board_info beagle_dss_data = {
- .default_display_name = "dvi",
-};
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_wp = -EINVAL,
- .deferred = true,
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply beagle_vsim_supply[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct gpio_led gpio_leds[];
-
-static struct usbhs_phy_data phy_data[] = {
- {
- .port = 2,
- .reset_gpio = 147,
- .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
- .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
- },
-};
-
-static int beagle_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- int r;
-
- mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
- /*
- * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
- * high / others active low)
- * DVI reset GPIO is different between beagle revisions
- */
- /* Valid for all -xM revisions */
- if (cpu_is_omap3630()) {
- /*
- * gpio + 1 on Xm controls the TFP410's enable line (active low)
- * gpio + 2 control varies depending on the board rev as below:
- * P7/P8 revisions(prototype): Camera EN
- * A2+ revisions (production): LDO (DVI, serial, led blocks)
- */
- r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW,
- "nDVI_PWR_EN");
- if (r)
- pr_err("%s: unable to configure nDVI_PWR_EN\n",
- __func__);
-
- beagle_config.dvi_pd_gpio = gpio + 2;
-
- } else {
- /*
- * REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
- if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
- pr_err("%s: unable to configure EHCI_nOC\n", __func__);
- }
- beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
-
- platform_device_register(&beagle_tfp410_device);
- platform_device_register(&beagle_dvi_connector_device);
- platform_device_register(&beagle_tv_connector_device);
-
- /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
- phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
- phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- return 0;
-}
-
-static struct twl4030_gpio_platform_data beagle_gpio_data = {
- .use_leds = true,
- .pullups = BIT(1),
- .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
- | BIT(15) | BIT(16) | BIT(17),
- .setup = beagle_twl_gpio_setup,
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data beagle_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply),
- .consumer_supplies = beagle_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data beagle_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply),
- .consumer_supplies = beagle_vsim_supply,
-};
-
-static struct twl4030_platform_data beagle_twldata = {
- /* platform_data for children goes here */
- .gpio = &beagle_gpio_data,
- .vmmc1 = &beagle_vmmc1,
- .vsim = &beagle_vsim,
-};
-
-static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
- {
- I2C_BOARD_INFO("eeprom", 0x50),
- },
-};
-
-static int __init omap3_beagle_i2c_init(void)
-{
- omap3_pmic_get_config(&beagle_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
- TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
- beagle_twldata.vpll2->constraints.name = "VDVI";
-
- omap3_pmic_init("twl4030", &beagle_twldata);
- /* Bus 3 is attached to the DVI port where devices like the pico DLP
- * projector don't work reliably with 400kHz */
- omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
- return 0;
-}
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "beagleboard::usr0",
- .default_trigger = "heartbeat",
- .gpio = 150,
- },
- {
- .name = "beagleboard::usr1",
- .default_trigger = "mmc0",
- .gpio = 149,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- },
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
- {
- .code = BTN_EXTRA,
- /* Dynamically assigned depending on board */
- .gpio = -EINVAL,
- .desc = "user",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_key_info,
- },
-};
-
-static struct platform_device madc_hwmon = {
- .name = "twl4030_madc_hwmon",
- .id = -1,
-};
-
-static struct platform_device *omap3_beagle_devices[] __initdata = {
- &leds_gpio,
- &keys_gpio,
- &madc_hwmon,
- &leds_pwm,
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static int __init beagle_opp_init(void)
-{
- int r = 0;
-
- if (!machine_is_omap3_beagle())
- return 0;
-
- /* Initialize the omap3 opp table if not already created. */
- r = omap3_opp_init();
- if (r < 0 && (r != -EEXIST)) {
- pr_err("%s: opp default init failed\n", __func__);
- return r;
- }
-
- /* Custom OPP enabled for all xM versions */
- if (cpu_is_omap3630()) {
- struct device *mpu_dev, *iva_dev;
-
- mpu_dev = get_cpu_device(0);
- iva_dev = omap_device_get_by_hwmod_name("iva");
-
- if (!mpu_dev || IS_ERR(iva_dev)) {
- pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
- __func__, mpu_dev, iva_dev);
- return -ENODEV;
- }
- /* Enable MPU 1GHz and lower opps */
- r = dev_pm_opp_enable(mpu_dev, 800000000);
- /* TODO: MPU 1GHz needs SR and ABB */
-
- /* Enable IVA 800MHz and lower opps */
- r |= dev_pm_opp_enable(iva_dev, 660000000);
- /* TODO: DSP 800MHz needs SR and ABB */
- if (r) {
- pr_err("%s: failed to enable higher opp %d\n",
- __func__, r);
- /*
- * Cleanup - disable the higher freqs - we dont care
- * about the results
- */
- dev_pm_opp_disable(mpu_dev, 800000000);
- dev_pm_opp_disable(iva_dev, 660000000);
- }
- }
- return 0;
-}
-omap_device_initcall(beagle_opp_init);
-
-static void __init omap3_beagle_init(void)
-{
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap3_beagle_init_rev();
-
- if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
- omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
- mmc[0].caps = beagle_config.mmc_caps;
- omap_hsmmc_init(mmc);
-
- omap3_beagle_i2c_init();
-
- gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
-
- platform_add_devices(omap3_beagle_devices,
- ARRAY_SIZE(omap3_beagle_devices));
- if (gpio_is_valid(beagle_config.dvi_pd_gpio))
- omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
- omap_display_init(&beagle_dss_data);
-
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
-
- usbhs_init(&usbhs_bdata);
-
- board_nand_init(omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
- NAND_BUSWIDTH_16, NULL);
- omap_twl4030_audio_init("omap3beagle", NULL);
-
- /* Ensure msecure is mux'd to be able to set the RTC. */
- omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
-
- /* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-}
-
-MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
- /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = omap3_beagle_init,
- .init_late = omap3_init_late,
- .init_time = omap3_secure_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
+++ /dev/null
-/*
- * board-overo.c (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "gpmc.h"
-#include "hsmmc.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define NAND_CS 0
-
-#define OVERO_GPIO_BT_XGATE 15
-#define OVERO_GPIO_W2W_NRESET 16
-#define OVERO_GPIO_PENDOWN 114
-#define OVERO_GPIO_BT_NRESET 164
-#define OVERO_GPIO_USBH_CPEN 168
-#define OVERO_GPIO_USBH_NRESET 183
-
-#define OVERO_SMSC911X_CS 5
-#define OVERO_SMSC911X_GPIO 176
-#define OVERO_SMSC911X_NRESET 64
-#define OVERO_SMSC911X2_CS 4
-#define OVERO_SMSC911X2_GPIO 65
-
-/* whether to register LCD35 instead of LCD43 */
-static bool overo_use_lcd35;
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
- defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-/* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply[] = {
- REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_init_data vads7846_regulator = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
- .consumer_supplies = ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
- .supply_name = "vads7846",
- .microvolts = 3300000, /* 3.3V */
- .gpio = -EINVAL,
- .startup_delay = 0,
- .init_data = &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &vads7846,
- },
-};
-
-static void __init overo_ads7846_init(void)
-{
- omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
- platform_device_register(&vads7846_device);
-}
-
-#else
-static inline void __init overo_ads7846_init(void) { return; }
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
- .id = 0,
- .cs = OVERO_SMSC911X_CS,
- .gpio_irq = OVERO_SMSC911X_GPIO,
- .gpio_reset = OVERO_SMSC911X_NRESET,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static struct omap_smsc911x_platform_data smsc911x2_cfg = {
- .id = 1,
- .cs = OVERO_SMSC911X2_CS,
- .gpio_irq = OVERO_SMSC911X2_GPIO,
- .gpio_reset = -EINVAL,
- .flags = SMSC911X_USE_32BIT,
-};
-
-static void __init overo_init_smsc911x(void)
-{
- gpmc_smsc911x_init(&smsc911x_cfg);
- gpmc_smsc911x_init(&smsc911x2_cfg);
-}
-
-#else
-static inline void __init overo_init_smsc911x(void) { return; }
-#endif
-
-/* DSS */
-#define OVERO_GPIO_LCD_EN 144
-#define OVERO_GPIO_LCD_BL 145
-
-static struct connector_atv_platform_data overo_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device overo_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &overo_tv_pdata,
-};
-
-static const struct display_timing overo_lcd43_videomode = {
- .pixelclock = { 0, 9200000, 0 },
-
- .hactive = { 0, 480, 0 },
- .hfront_porch = { 0, 8, 0 },
- .hback_porch = { 0, 4, 0 },
- .hsync_len = { 0, 41, 0 },
-
- .vactive = { 0, 272, 0 },
- .vfront_porch = { 0, 4, 0 },
- .vback_porch = { 0, 2, 0 },
- .vsync_len = { 0, 10, 0 },
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
- DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data overo_lcd43_pdata = {
- .name = "lcd43",
- .source = "dpi.0",
-
- .data_lines = 24,
-
- .display_timing = &overo_lcd43_videomode,
-
- .enable_gpio = OVERO_GPIO_LCD_EN,
- .backlight_gpio = OVERO_GPIO_LCD_BL,
-};
-
-static struct platform_device overo_lcd43_device = {
- .name = "panel-dpi",
- .id = 0,
- .dev.platform_data = &overo_lcd43_pdata,
-};
-
-static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = 3,
-};
-
-static struct platform_device overo_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &overo_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = -1,
-};
-
-static struct platform_device overo_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &overo_tfp410_pdata,
-};
-
-static struct omap_dss_board_info overo_dss_data = {
- .default_display_name = "lcd43",
-};
-
-static void __init overo_display_init(void)
-{
- omap_display_init(&overo_dss_data);
-
- if (!overo_use_lcd35)
- platform_device_register(&overo_lcd43_device);
- platform_device_register(&overo_tfp410_device);
- platform_device_register(&overo_dvi_connector_device);
- platform_device_register(&overo_tv_connector_device);
-}
-
-static struct mtd_partition overo_nand_partitions[] = {
- {
- .name = "xloader",
- .offset = 0, /* Offset = 0x00000 */
- .size = 4 * NAND_BLOCK_SIZE,
- .mask_flags = MTD_WRITEABLE
- },
- {
- .name = "uboot",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 14 * NAND_BLOCK_SIZE,
- },
- {
- .name = "uboot environment",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
- .size = 2 * NAND_BLOCK_SIZE,
- },
- {
- .name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 32 * NAND_BLOCK_SIZE,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- {
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .transceiver = true,
- .ocr_mask = 0x00100000, /* 3.3V */
- },
- {} /* Terminator */
-};
-
-static struct regulator_consumer_supply overo_vmmc1_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led gpio_leds[] = {
- {
- .name = "overo:red:gpio21",
- .default_trigger = "heartbeat",
- .gpio = 21,
- .active_low = true,
- },
- {
- .name = "overo:blue:gpio22",
- .default_trigger = "none",
- .gpio = 22,
- .active_low = true,
- },
- {
- .name = "overo:blue:COM",
- .default_trigger = "mmc0",
- .gpio = -EINVAL, /* gets replaced */
- .active_low = true,
- },
-};
-
-static struct gpio_led_platform_data gpio_leds_pdata = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_leds_pdata,
- },
-};
-
-static void __init overo_init_led(void)
-{
- platform_device_register(&gpio_leds_device);
-}
-
-#else
-static inline void __init overo_init_led(void) { return; }
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button gpio_buttons[] = {
- {
- .code = BTN_0,
- .gpio = 23,
- .desc = "button0",
- .wakeup = 1,
- },
- {
- .code = BTN_1,
- .gpio = 14,
- .desc = "button1",
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data gpio_keys_pdata = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_keys_pdata,
- },
-};
-
-static void __init overo_init_keys(void)
-{
- platform_device_register(&gpio_keys_device);
-}
-
-#else
-static inline void __init overo_init_keys(void) { return; }
-#endif
-
-static int overo_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data overo_gpio_data = {
- .use_leds = true,
- .setup = overo_twl_gpio_setup,
-};
-
-static struct regulator_init_data overo_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
- .consumer_supplies = overo_vmmc1_supply,
-};
-
-static struct twl4030_platform_data overo_twldata = {
- .gpio = &overo_gpio_data,
- .vmmc1 = &overo_vmmc1,
-};
-
-static int __init overo_i2c_init(void)
-{
- omap3_pmic_get_config(&overo_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
- overo_twldata.vpll2->constraints.name = "VDVI";
-
- omap3_pmic_init("tps65950", &overo_twldata);
- /* i2c2 pins are used for gpio */
- omap_register_i2c_bus(3, 400, NULL, 0);
- return 0;
-}
-
-static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
- .name = "lcd35",
- .source = "dpi.0",
-
- .data_lines = 24,
-
- .enable_gpio = OVERO_GPIO_LCD_EN,
- .backlight_gpio = OVERO_GPIO_LCD_BL,
-};
-
-/*
- * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
- * selection is done based on the overo_use_lcd35 field. If new SPI
- * devices are added here, extra work is needed to make only the lgphilips panel
- * affected by the overo_use_lcd35 field.
- */
-static struct spi_board_info overo_spi_board_info[] __initdata = {
- {
- .modalias = "panel_lgphilips_lb035q02",
- .bus_num = 1,
- .chip_select = 1,
- .max_speed_hz = 500000,
- .mode = SPI_MODE_3,
- .platform_data = &overo_lcd35_pdata,
- },
-};
-
-static int __init overo_spi_init(void)
-{
- overo_ads7846_init();
-
- if (overo_use_lcd35) {
- spi_register_board_info(overo_spi_board_info,
- ARRAY_SIZE(overo_spi_board_info));
- }
- return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 2,
- .reset_gpio = OVERO_GPIO_USBH_NRESET,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct gpio overo_bt_gpios[] __initdata = {
- { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" },
- { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
- REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init overo_init(void)
-{
- int ret;
-
- if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
- overo_use_lcd35 = true;
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- overo_i2c_init();
- omap_hsmmc_init(mmc);
- omap_serial_init();
- omap_sdrc_init(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- board_nand_init(overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
- overo_spi_init();
- overo_init_smsc911x();
- overo_init_led();
- overo_init_keys();
- omap_twl4030_audio_init("overo", NULL);
-
- overo_display_init();
-
- /* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
- "OVERO_GPIO_W2W_NRESET");
- if (ret == 0) {
- gpio_export(OVERO_GPIO_W2W_NRESET, 0);
- gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
- udelay(10);
- gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
- } else {
- pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
- }
-
- ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
- if (ret) {
- pr_err("%s: could not obtain BT gpios\n", __func__);
- } else {
- gpio_export(OVERO_GPIO_BT_XGATE, 0);
- gpio_export(OVERO_GPIO_BT_NRESET, 0);
- gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
- mdelay(6);
- gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
- }
-
- ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
- "OVERO_GPIO_USBH_CPEN");
- if (ret == 0)
- gpio_export(OVERO_GPIO_USBH_CPEN, 0);
- else
- pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
-}
-
-MACHINE_START(OVERO, "Gumstix Overo")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap35xx_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = overo_init,
- .init_late = omap35xx_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
u32 csirxfe;
u32 iva2_bootaddr;
u32 iva2_bootmod;
+ u32 wkup_ctrl;
u32 debobs_0;
u32 debobs_1;
u32 debobs_2;
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
control_context.iva2_bootmod =
omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+ control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
OMAP343X_CONTROL_IVA2_BOOTADDR);
omap_ctrl_writel(control_context.iva2_bootmod,
OMAP343X_CONTROL_IVA2_BOOTMOD);
+ omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
/* 34xx GENERAL_WKUP register offsets */
+#define OMAP34XX_CONTROL_WKUP_CTRL (OMAP343X_CONTROL_GENERAL_WKUP - 0x4)
+#define OMAP36XX_GPIO_IO_PWRDNZ BIT(6)
+
#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
0x008 + (i))
#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return PTR_RET(pdev);
+ return PTR_ERR_OR_ZERO(pdev);
}
omap_postcore_initcall(omap3_l3_init);
pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return PTR_RET(pdev);
+ return PTR_ERR_OR_ZERO(pdev);
}
omap_postcore_initcall(omap_gpmc_init);
pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
res, num_res, NULL, 0);
- return PTR_RET(pdev);
+ return PTR_ERR_OR_ZERO(pdev);
}
#else
int __init omap_init_vrfb(void) { return 0; }
div = gpmc_calc_divider(min_gpmc_clk_period);
gpmc_clk_ns = gpmc_ticks_to_ns(div);
- if (gpmc_clk_ns < 15) /* >66Mhz */
+ if (gpmc_clk_ns < 15) /* >66MHz */
onenand_flags |= ONENAND_FLAG_HF;
else
onenand_flags &= ~ONENAND_FLAG_HF;
- if (gpmc_clk_ns < 12) /* >83Mhz */
+ if (gpmc_clk_ns < 12) /* >83MHz */
onenand_flags |= ONENAND_FLAG_VHF;
else
onenand_flags &= ~ONENAND_FLAG_VHF;
reg = omap_ctrl_readl(control_pbias_offset);
if (cpu_is_omap3630()) {
- /* Set MMC I/O to 52Mhz */
+ /* Set MMC I/O to 52MHz */
prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args);
}
-static struct irq_domain_ops wakeupgen_domain_ops = {
+static const struct irq_domain_ops wakeupgen_domain_ops = {
.xlate = wakeupgen_domain_xlate,
.alloc = wakeupgen_domain_alloc,
.free = irq_domain_free_irqs_common,
*/
static int _omap_device_enable_hwmods(struct omap_device *od)
{
+ int ret = 0;
int i;
for (i = 0; i < od->hwmods_cnt; i++)
- omap_hwmod_enable(od->hwmods[i]);
+ ret |= omap_hwmod_enable(od->hwmods[i]);
- /* XXX pass along return value here? */
- return 0;
+ return ret;
}
/**
*/
static int _omap_device_idle_hwmods(struct omap_device *od)
{
+ int ret = 0;
int i;
for (i = 0; i < od->hwmods_cnt; i++)
- omap_hwmod_idle(od->hwmods[i]);
+ ret |= omap_hwmod_idle(od->hwmods[i]);
- /* XXX pass along return value here? */
- return 0;
+ return ret;
}
/* Public functions for use by core code */
int ret;
ret = pm_generic_runtime_suspend(dev);
+ if (ret)
+ return ret;
- if (!ret)
- omap_device_idle(pdev);
-
- return ret;
+ return omap_device_idle(pdev);
}
static int _od_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
+ int ret;
- omap_device_enable(pdev);
+ ret = omap_device_enable(pdev);
+ if (ret)
+ return ret;
return pm_generic_runtime_resume(dev);
}
ret = _omap_device_enable_hwmods(od);
- od->_state = OMAP_DEVICE_STATE_ENABLED;
+ if (ret == 0)
+ od->_state = OMAP_DEVICE_STATE_ENABLED;
return ret;
}
ret = _omap_device_idle_hwmods(od);
- od->_state = OMAP_DEVICE_STATE_IDLE;
+ if (ret == 0)
+ od->_state = OMAP_DEVICE_STATE_IDLE;
return ret;
}
*/
int omap_hwmod_idle(struct omap_hwmod *oh)
{
+ int r;
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
- _idle(oh);
+ r = _idle(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
- return 0;
+ return r;
}
/**
*/
int omap_hwmod_shutdown(struct omap_hwmod *oh)
{
+ int r;
unsigned long flags;
if (!oh)
return -EINVAL;
spin_lock_irqsave(&oh->_lock, flags);
- _shutdown(oh);
+ r = _shutdown(oh);
spin_unlock_irqrestore(&oh->_lock, flags);
- return 0;
+ return r;
}
/*
#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
+#ifdef CONFIG_OMAP_GPMC_DEBUG
+#define DEBUG_OMAP_GPMC_HWMOD_FLAGS HWMOD_INIT_NO_RESET
+#else
+#define DEBUG_OMAP_GPMC_HWMOD_FLAGS 0
+#endif
+
#if defined(CONFIG_DEBUG_OMAP2UART1)
#undef DEBUG_OMAP2UART1_FLAGS
#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
.name = "gpmc",
.class = &omap2xxx_gpmc_hwmod_class,
.main_clk = "gpmc_fck",
- /*
- * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
- * block. It is not being added due to any known bugs with
- * resetting the GPMC IP block, but rather because any timings
- * set by the bootloader are not being correctly programmed by
- * the kernel from the board file or DT data.
- * HWMOD_INIT_NO_RESET should be removed ASAP.
- */
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
- HWMOD_NO_IDLEST),
+ /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+ .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
.prcm = {
.omap2 = {
.prcm_reg_id = 3,
extern struct omap_hwmod am33xx_uart6_hwmod;
extern struct omap_hwmod am33xx_wd_timer1_hwmod;
+extern struct omap_hwmod_class am33xx_emif_hwmod_class;
extern struct omap_hwmod_class am33xx_l4_hwmod_class;
extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class;
extern struct omap_hwmod_class am33xx_control_hwmod_class;
.clkdm_name = "l4_wkup_clkdm",
};
+/*
+ * 'emif' class
+ * instance(s): emif
+ */
+static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = {
+ .rev_offs = 0x0000,
+};
+
+struct omap_hwmod_class am33xx_emif_hwmod_class = {
+ .name = "emif",
+ .sysc = &am33xx_emif_sysc,
+};
+
/*
* 'aes0' class
*/
.name = "gpmc",
.class = &am33xx_gpmc_hwmod_class,
.clkdm_name = "l3s_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+ .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS,
.main_clk = "l3s_gclk",
.prcm = {
.omap4 = {
* IP blocks
*/
-/*
- * 'emif' class
- * instance(s): emif
- */
-static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = {
- .rev_offs = 0x0000,
-};
-
-static struct omap_hwmod_class am33xx_emif_hwmod_class = {
- .name = "emif",
- .sysc = &am33xx_emif_sysc,
-};
-
/* emif */
static struct omap_hwmod am33xx_emif_hwmod = {
.name = "emif",
.clkdm_name = "core_l3_clkdm",
.mpu_irqs = omap3xxx_gpmc_irqs,
.main_clk = "gpmc_fck",
- /*
- * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
- * block. It is not being added due to any known bugs with
- * resetting the GPMC IP block, but rather because any timings
- * set by the bootloader are not being correctly programmed by
- * the kernel from the board file or DT data.
- * HWMOD_INIT_NO_RESET should be removed ASAP.
- */
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
- HWMOD_NO_IDLEST),
+ /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+ .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
};
/*
/* GP-only hwmod links */
static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_sec__timer12,
- &omap3xxx_l4_core__sham,
- &omap3xxx_l4_core__aes,
NULL
};
static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_sec__timer12,
- &omap3xxx_l4_core__sham,
- &omap3xxx_l4_core__aes,
NULL
};
static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = {
&omap3xxx_l4_sec__timer12,
- /*
- * Apparently the SHA/MD5 and AES accelerator IP blocks are
- * only present on some AM35xx chips, and no one knows which
- * ones. See
- * http://www.spinics.net/lists/arm-kernel/msg215466.html So
- * if you need these IP blocks on an AM35xx, try uncommenting
- * the following lines.
- */
+ NULL
+};
+
+/* crypto hwmod links */
+static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_core__sham,
+ NULL
+};
+
+static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_core__aes,
+ NULL
+};
+
+static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_core__sham,
+ NULL
+};
+
+static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_core__aes,
+ NULL
+};
+
+/*
+ * Apparently the SHA/MD5 and AES accelerator IP blocks are
+ * only present on some AM35xx chips, and no one knows which
+ * ones. See
+ * http://www.spinics.net/lists/arm-kernel/msg215466.html So
+ * if you need these IP blocks on an AM35xx, try uncommenting
+ * the following lines.
+ */
+static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
/* &omap3xxx_l4_core__sham, */
+ NULL
+};
+
+static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = {
/* &omap3xxx_l4_core__aes, */
NULL
};
NULL
};
+/**
+ * omap3xxx_hwmod_is_hs_ip_block_usable - is a security IP block accessible?
+ * @bus: struct device_node * for the top-level OMAP DT data
+ * @dev_name: device name used in the DT file
+ *
+ * Determine whether a "secure" IP block @dev_name is usable by Linux.
+ * There doesn't appear to be a 100% reliable way to determine this,
+ * so we rely on heuristics. If @bus is null, meaning there's no DT
+ * data, then we only assume the IP block is accessible if the OMAP is
+ * fused as a 'general-purpose' SoC. If however DT data is present,
+ * test to see if the IP block is described in the DT data and set to
+ * 'status = "okay"'. If so then we assume the ODM has configured the
+ * OMAP firewalls to allow access to the IP block.
+ *
+ * Return: 0 if device named @dev_name is not likely to be accessible,
+ * or 1 if it is likely to be accessible.
+ */
+static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
+ const char *dev_name)
+{
+ if (!bus)
+ return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0;
+
+ if (of_device_is_available(of_find_node_by_name(bus, dev_name)))
+ return 1;
+
+ return 0;
+}
+
int __init omap3xxx_hwmod_init(void)
{
int r;
- struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL;
+ struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL;
+ struct omap_hwmod_ocp_if **h_aes = NULL;
+ struct device_node *bus = NULL;
unsigned int rev;
omap_hwmod_init();
rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
h = omap34xx_hwmod_ocp_ifs;
h_gp = omap34xx_gp_hwmod_ocp_ifs;
+ h_sham = omap34xx_sham_hwmod_ocp_ifs;
+ h_aes = omap34xx_aes_hwmod_ocp_ifs;
} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
h = am35xx_hwmod_ocp_ifs;
h_gp = am35xx_gp_hwmod_ocp_ifs;
+ h_sham = am35xx_sham_hwmod_ocp_ifs;
+ h_aes = am35xx_aes_hwmod_ocp_ifs;
} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
rev == OMAP3630_REV_ES1_2) {
h = omap36xx_hwmod_ocp_ifs;
h_gp = omap36xx_gp_hwmod_ocp_ifs;
+ h_sham = omap36xx_sham_hwmod_ocp_ifs;
+ h_aes = omap36xx_aes_hwmod_ocp_ifs;
} else {
WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
return -EINVAL;
return r;
}
+ /*
+ * Register crypto hwmod links only if they are not disabled in DT.
+ * If DT information is missing, enable them only for GP devices.
+ */
+
+ if (of_have_populated_dt())
+ bus = of_find_node_by_name(NULL, "ocp");
+
+ if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) {
+ r = omap_hwmod_register_links(h_sham);
+ if (r < 0)
+ return r;
+ }
+
+ if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
+ r = omap_hwmod_register_links(h_aes);
+ if (r < 0)
+ return r;
+ }
/*
* Register hwmod links specific to certain ES levels of a
/* IP blocks */
+static struct omap_hwmod am43xx_emif_hwmod = {
+ .name = "emif",
+ .class = &am33xx_emif_hwmod_class,
+ .clkdm_name = "emif_clkdm",
+ .flags = HWMOD_INIT_NO_IDLE,
+ .main_clk = "dpll_ddr_m2_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
static struct omap_hwmod am43xx_l4_hs_hwmod = {
.name = "l4_hs",
.class = &am33xx_l4_hwmod_class,
};
/* Interfaces */
+static struct omap_hwmod_ocp_if am43xx_l3_main__emif = {
+ .master = &am33xx_l3_main_hwmod,
+ .slave = &am43xx_emif_hwmod,
+ .clk = "dpll_core_m4_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
.slave = &am43xx_l4_hs_hwmod,
&am33xx_l3_main__l3_instr,
&am33xx_l3_main__gfx,
&am33xx_l3_s__l3_main,
+ &am43xx_l3_main__emif,
&am33xx_pruss__l3_main,
&am43xx_wkup_m3__l4_wkup,
&am33xx_gfx__l3_main,
.name = "gpmc",
.class = &omap44xx_gpmc_hwmod_class,
.clkdm_name = "l3_2_clkdm",
- /*
- * XXX HWMOD_INIT_NO_RESET should not be needed for this IP
- * block. It is not being added due to any known bugs with
- * resetting the GPMC IP block, but rather because any timings
- * set by the bootloader are not being correctly programmed by
- * the kernel from the board file or DT data.
- * HWMOD_INIT_NO_RESET should be removed ASAP.
- */
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+ .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS,
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET,
.name = "gpmc",
.class = &dra7xx_gpmc_hwmod_class,
.clkdm_name = "l3main1_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
- HWMOD_SWSUP_SIDLE),
+ /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+ .flags = HWMOD_SWSUP_SIDLE | DEBUG_OMAP_GPMC_HWMOD_FLAGS,
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {
.clkdm_name = "alwon_l3s_clkdm",
.class = &dm81xx_gpmc_hwmod_class,
.main_clk = "sysclk6_ck",
+ /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */
+ .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS,
.prcm = {
.omap4 = {
.clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL,
RATE_IN_243X},
/* PRCM-boot/bypass */
- {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
+ {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13MHz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
RATE_IN_243X},
/* PRCM-boot/bypass */
- {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
+ {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12MHz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
#endif
#ifdef CONFIG_ARCH_OMAP3
+/*
+ * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
+ * mode for MMC1 in case bootloader did not configure things.
+ * Note that if the pins are used for MMC1, pbias-regulator
+ * manages the IO voltage.
+ */
+static void __init omap3_gpio126_127_129(void)
+{
+ u32 reg;
+
+ reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+ reg &= ~OMAP343X_PBIASLITEVMODE1;
+ reg |= OMAP343X_PBIASLITEPWRDNZ1;
+ omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
+ if (cpu_is_omap3630()) {
+ reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
+ reg |= OMAP36XX_GPIO_IO_PWRDNZ;
+ omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
+ }
+}
+
static void __init hsmmc2_internal_input_clk(void)
{
u32 reg;
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
+ { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n",
dev_name);
- return PTR_RET(omap_pmu_dev);
+ return PTR_ERR_OR_ZERO(omap_pmu_dev);
}
static int __init omap_init_pmu(void)
#define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0
#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
+#define AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0720
+
#endif
mem_timings.slow_dll_ctrl |=
((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
- /* 90 degree phase for anything below 133Mhz + disable DLL filter */
+ /* 90 degree phase for anything below 133MHz + disable DLL filter */
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}
if (cmdline_find_option(uart_name)) {
console_uart_id = uart->num;
- if (console_loglevel >= 10) {
+ if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) {
uart_debug = true;
pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
uart_name, uart->num);
*/
ldr r1, kernel_flush
blx r1
- /*
- * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
- * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
- * This sequence switches back to ARM. Note that .align may insert a
- * nop: bx pc needs to be word-aligned in order to work.
- */
- THUMB( .thumb )
- THUMB( .align )
- THUMB( bx pc )
- THUMB( nop )
- .arm
-
b omap3_do_wfi
-
-/*
- * Local variables
- */
+ENDPROC(omap34xx_cpu_suspend)
omap3_do_wfi_sram_addr:
.word omap3_do_wfi_sram
kernel_flush:
* ===================================
*/
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
-
-/*
- * Local variables
- */
+ENDPROC(omap3_do_wfi)
sdrc_power:
.word SDRC_POWER_V
cm_idlest1_core:
mvn r9, #0x4 @ mask to get clear bit2
and r10, r10, r9 @ clear bit2 for lock mode.
orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
- orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz
+ orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz
str r10, [r11] @ commit to DLLA_CTRL
bl i_dll_wait @ wait for dll to lock
mvn r9, #0x4 @ mask to get clear bit2
and r10, r10, r9 @ clear bit2 for lock mode.
orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos)
- orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz
+ orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz
str r10, [r11] @ commit to DLLA_CTRL
bl i_dll_wait @ wait for dll to lock
* ready for them to initialise.
*/
ENTRY(sirfsoc_secondary_startup)
- bl v7_invalidate_l1
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
#
# Common support (must be linked before board specific support)
-obj-y += clock.o devices.o generic.o irq.o \
- reset.o
+obj-y += devices.o generic.o irq.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
# Generic drivers that other drivers may depend upon
# SoC-specific code
-obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
+++ /dev/null
-/*
- * linux/arch/arm/mach-pxa/clock-pxa2xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa2xx-regs.h>
-
-#include "clock.h"
-
-void clk_pxa2xx_cken_enable(struct clk *clk)
-{
- CKEN |= 1 << clk->cken;
-}
-
-void clk_pxa2xx_cken_disable(struct clk *clk)
-{
- CKEN &= ~(1 << clk->cken);
-}
-
-const struct clkops clk_pxa2xx_cken_ops = {
- .enable = clk_pxa2xx_cken_enable,
- .disable = clk_pxa2xx_cken_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t saved_cken;
-
-static int pxa2xx_clock_suspend(void)
-{
- saved_cken = CKEN;
- return 0;
-}
-
-static void pxa2xx_clock_resume(void)
-{
- CKEN = saved_cken;
-}
-#else
-#define pxa2xx_clock_suspend NULL
-#define pxa2xx_clock_resume NULL
-#endif
-
-struct syscore_ops pxa2xx_clock_syscore_ops = {
- .suspend = pxa2xx_clock_suspend,
- .resume = pxa2xx_clock_resume,
-};
+++ /dev/null
-/*
- * linux/arch/arm/mach-pxa/clock-pxa3xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
-
-#include "clock.h"
-
-/* Crystal clock: 13MHz */
-#define BASE_CLK 13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK 60000000
-
-#define ACCR_D0CS (1 << 26)
-#define ACCR_PCCE (1 << 11)
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
- unsigned long acsr, xclkcfg;
- unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
- /* Read XCLKCFG register turbo bit */
- __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
- t = xclkcfg & 0x1;
-
- acsr = ACSR;
-
- xl = acsr & 0x1f;
- xn = (acsr >> 8) & 0x7;
- hss = (acsr >> 14) & 0x3;
-
- XL = xl * BASE_CLK;
- XN = xn * XL;
-
- ro = acsr & ACCR_D0CS;
-
- CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
- HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
- if (info) {
- pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
- RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
- (ro) ? "" : "in");
- pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
- XL / 1000000, (XL % 1000000) / 10000, xl);
- pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
- XN / 1000000, (XN % 1000000) / 10000, xn,
- (t) ? "" : "in");
- pr_info("HSIO bus clock: %d.%02dMHz\n",
- HSS / 1000000, (HSS % 1000000) / 10000);
- }
-
- return CLK / 1000;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
- unsigned long rate = 312000000;
- unsigned long ac97_div;
-
- ac97_div = AC97_DIV;
-
- /* This may loose precision for some rates but won't for the
- * standard 24.576MHz.
- */
- rate /= (ac97_div >> 12) & 0x7fff;
- rate *= (ac97_div & 0xfff);
-
- return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
- unsigned long acsr;
- unsigned int hss, hsio_clk;
-
- acsr = ACSR;
-
- hss = (acsr >> 14) & 0x3;
- hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
- return hsio_clk;
-}
-
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
-
-static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
-{
- unsigned long acsr = ACSR;
- unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
-
- return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
- df_clkdiv[(memclkcfg >> 16) & 0x3];
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
- unsigned long mask = 1ul << (clk->cken & 0x1f);
-
- if (clk->cken < 32)
- CKENA |= mask;
- else if (clk->cken < 64)
- CKENB |= mask;
- else
- CKENC |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
- unsigned long mask = 1ul << (clk->cken & 0x1f);
-
- if (clk->cken < 32)
- CKENA &= ~mask;
- else if (clk->cken < 64)
- CKENB &= ~mask;
- else
- CKENC &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
-};
-
-const struct clkops clk_pxa3xx_hsio_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
- .getrate = clk_pxa3xx_hsio_getrate,
-};
-
-const struct clkops clk_pxa3xx_ac97_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
- .getrate = clk_pxa3xx_ac97_getrate,
-};
-
-const struct clkops clk_pxa3xx_smemc_ops = {
- .enable = clk_pxa3xx_cken_enable,
- .disable = clk_pxa3xx_cken_disable,
- .getrate = clk_pxa3xx_smemc_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
- OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
- OSCC &= ~OSCC_PEN;
-}
-
-const struct clkops clk_pxa3xx_pout_ops = {
- .enable = clk_pout_enable,
- .disable = clk_pout_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t cken[2];
-static uint32_t accr;
-
-static int pxa3xx_clock_suspend(void)
-{
- cken[0] = CKENA;
- cken[1] = CKENB;
- accr = ACCR;
- return 0;
-}
-
-static void pxa3xx_clock_resume(void)
-{
- ACCR = accr;
- CKENA = cken[0];
- CKENB = cken[1];
-}
-#else
-#define pxa3xx_clock_suspend NULL
-#define pxa3xx_clock_resume NULL
-#endif
-
-struct syscore_ops pxa3xx_clock_syscore_ops = {
- .suspend = pxa3xx_clock_suspend,
- .resume = pxa3xx_clock_resume,
-};
+++ /dev/null
-/*
- * linux/arch/arm/mach-sa1100/clock.c
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (clk->enabled++ == 0)
- clk->ops->enable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- if (clk->delay)
- udelay(clk->delay);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- WARN_ON(clk->enabled == 0);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->enabled == 0)
- clk->ops->disable(clk);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long rate;
-
- rate = clk->rate;
- if (clk->ops->getrate)
- rate = clk->ops->getrate(clk);
-
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (clk->ops->setrate) {
- spin_lock_irqsave(&clocks_lock, flags);
- ret = clk->ops->setrate(clk, rate);
- spin_unlock_irqrestore(&clocks_lock, flags);
- }
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-void clk_dummy_enable(struct clk *clk)
-{
-}
-
-void clk_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clk_dummy_ops = {
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable,
-};
-
-struct clk clk_dummy = {
- .ops = &clk_dummy_ops,
-};
+++ /dev/null
-#include <linux/clkdev.h>
-#include <linux/syscore_ops.h>
-
-struct clkops {
- void (*enable)(struct clk *);
- void (*disable)(struct clk *);
- unsigned long (*getrate)(struct clk *);
- int (*setrate)(struct clk *, unsigned long);
-};
-
-struct clk {
- const struct clkops *ops;
- unsigned long rate;
- unsigned int cken;
- unsigned int delay;
- unsigned int enabled;
-};
-
-void clk_dummy_enable(struct clk *);
-void clk_dummy_disable(struct clk *);
-
-extern const struct clkops clk_dummy_ops;
-extern struct clk clk_dummy;
-
-#define INIT_CLKREG(_clk,_devname,_conname) \
- { \
- .clk = _clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
-#define DEFINE_CK(_name, _cken, _ops) \
-struct clk clk_##_name = { \
- .ops = _ops, \
- .cken = CKEN_##_cken, \
- }
-
-#define DEFINE_CLK(_name, _ops, _rate, _delay) \
-struct clk clk_##_name = { \
- .ops = _ops, \
- .rate = _rate, \
- .delay = _delay, \
- }
-
-#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay) \
-struct clk clk_##_name = { \
- .ops = &clk_pxa2xx_cken_ops, \
- .rate = _rate, \
- .cken = CKEN_##_cken, \
- .delay = _delay, \
- }
-
-extern const struct clkops clk_pxa2xx_cken_ops;
-
-void clk_pxa2xx_cken_enable(struct clk *clk);
-void clk_pxa2xx_cken_disable(struct clk *clk);
-
-extern struct syscore_ops pxa2xx_clock_syscore_ops;
-
-#if defined(CONFIG_PXA3xx)
-#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
-struct clk clk_##_name = { \
- .ops = &clk_pxa3xx_cken_ops, \
- .rate = _rate, \
- .cken = CKEN_##_cken, \
- .delay = _delay, \
- }
-
-extern const struct clkops clk_pxa3xx_cken_ops;
-extern const struct clkops clk_pxa3xx_hsio_ops;
-extern const struct clkops clk_pxa3xx_ac97_ops;
-extern const struct clkops clk_pxa3xx_pout_ops;
-extern const struct clkops clk_pxa3xx_smemc_ops;
-
-extern void clk_pxa3xx_cken_enable(struct clk *);
-extern void clk_pxa3xx_cken_disable(struct clk *);
-
-extern struct syscore_ops pxa3xx_clock_syscore_ops;
-
-#endif
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/clk-provider.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include "devices.h"
#include "generic.h"
-#include "clock.h"
/* Only e800 has 128MB RAM */
void __init eseries_fixup(struct tag *tags, char **cmdline)
};
/* Some e-series hardware cannot control the 32K clock */
-static void clk_32k_dummy(struct clk *clk)
-{
-}
-
-static const struct clkops clk_32k_dummy_ops = {
- .enable = clk_32k_dummy,
- .disable = clk_32k_dummy,
-};
-
-static struct clk tmio_dummy_clk = {
- .ops = &clk_32k_dummy_ops,
- .rate = 32768,
-};
-
-static struct clk_lookup eseries_clkregs[] = {
- INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
-};
-
static void __init eseries_register_clks(void)
{
- clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+ clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768);
}
#ifdef CONFIG_MACH_E330
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
+ /* GPIO11_GPIO, IRQ0 */
GPIO6_GPIO, /* IRQ1 */
GPIO27_GPIO, /* RST0 */
GPIO24_GPIO, /* RST1 */
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+
+ /* tc6393xb */
+ GPIO11_3_6MHz,
};
static struct w100_gen_regs e800_lcd_regs = {
*/
void __init pxa_timer_init(void)
{
+ if (cpu_is_pxa25x())
+ pxa25x_clocks_init();
+ if (cpu_is_pxa27x())
+ pxa27x_clocks_init();
+ if (cpu_is_pxa3xx())
+ pxa3xx_clocks_init();
pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000),
get_clock_tick_rate());
}
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#define pxa25x_handle_irq icip_handle_irq
+extern int __init pxa25x_clocks_init(void);
extern void __init pxa25x_init_irq(void);
extern void __init pxa25x_map_io(void);
extern void __init pxa26x_init_irq(void);
#define pxa27x_handle_irq ichp_handle_irq
+extern int __init pxa27x_clocks_init(void);
extern void __init pxa27x_dt_init_irq(void);
extern unsigned pxa27x_get_clk_frequency_khz(int);
extern void __init pxa27x_init_irq(void);
extern void __init pxa27x_map_io(void);
#define pxa3xx_handle_irq ichp_handle_irq
+extern int __init pxa3xx_clocks_init(void);
extern void __init pxa3xx_dt_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa3xx_map_io(void);
return 0;
}
-static struct irq_domain_ops pxa_irq_ops = {
+static const struct irq_domain_ops pxa_irq_ops = {
.map = pxa_irq_map,
.xlate = irq_domain_xlate_onecell,
};
#include <mach/smemc.h>
#include "generic.h"
-#include "clock.h"
#include "devices.h"
static unsigned long lubbock_pin_config[] __initdata = {
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
+ /* SA1111 chip */
+ GPIO11_3_6MHz,
+
/* wakeup */
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
};
static void isp116x_pfm_delay(struct device *dev, int delay)
{
- /* 400Mhz PXA2 = 2.5ns / instruction */
+ /* 400MHz PXA2 = 2.5ns / instruction */
int cyc = delay / 10;
#include "generic.h"
#include "devices.h"
-#include "clock.h"
/*
* Various clock factors driven by the CCCR register.
*/
-/* Crystal Frequency to Memory Frequency Multiplier (L) */
-static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
-
-/* Memory Frequency to Run Mode Frequency Multiplier (M) */
-static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
-
-/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
-/* Note: we store the value N * 2 here. */
-static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
-
-/* Crystal clock */
-#define BASE_CLK 3686400
-
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa25x_get_clk_frequency_khz(int info)
-{
- unsigned long cccr, turbo;
- unsigned int l, L, m, M, n2, N;
-
- cccr = CCCR;
- asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) );
-
- l = L_clk_mult[(cccr >> 0) & 0x1f];
- m = M_clk_mult[(cccr >> 5) & 0x03];
- n2 = N2_clk_mult[(cccr >> 7) & 0x07];
-
- L = l * BASE_CLK;
- M = m * L;
- N = n2 * M / 2;
-
- if(info)
- {
- L += 5000;
- printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n",
- L / 1000000, (L % 1000000) / 10000, l );
- M += 5000;
- printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
- M / 1000000, (M % 1000000) / 10000, m );
- N += 5000;
- printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
- N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5,
- (turbo & 1) ? "" : "in" );
- }
-
- return (turbo & 1) ? (N/1000) : (M/1000);
-}
-
-static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
-{
- return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
-}
-
-static const struct clkops clk_pxa25x_mem_ops = {
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable,
- .getrate = clk_pxa25x_mem_getrate,
-};
-
-static const struct clkops clk_pxa25x_lcd_ops = {
- .enable = clk_pxa2xx_cken_enable,
- .disable = clk_pxa2xx_cken_disable,
- .getrate = clk_pxa25x_mem_getrate,
-};
-
-static unsigned long gpio12_config_32k[] = {
- GPIO12_32KHz,
-};
-
-static unsigned long gpio12_config_gpio[] = {
- GPIO12_GPIO,
-};
-
-static void clk_gpio12_enable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio12_config_32k, 1);
-}
-
-static void clk_gpio12_disable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio12_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio12_ops = {
- .enable = clk_gpio12_enable,
- .disable = clk_gpio12_disable,
-};
-
-static unsigned long gpio11_config_3m6[] = {
- GPIO11_3_6MHz,
-};
-
-static unsigned long gpio11_config_gpio[] = {
- GPIO11_GPIO,
-};
-
-static void clk_gpio11_enable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio11_config_3m6, 1);
-}
-
-static void clk_gpio11_disable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio11_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio11_ops = {
- .enable = clk_gpio11_enable,
- .disable = clk_gpio11_disable,
-};
-
-/*
- * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
- * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
- * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
- */
-
-/*
- * PXA 2xx clock declarations.
- */
-static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
-static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
-
-static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
-static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa25x_clkregs[] = {
- INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
- INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
- INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
- INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
- INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
- INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
- INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
- INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
- INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
- INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
- INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
- INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
- INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
- INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
- INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-#ifdef CONFIG_CPU_PXA26x
- INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL),
-#else
- INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL),
-#endif
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
- INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
-
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
reset_status = RCSR;
- clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
-
if ((ret = pxa_init_dma(IRQ_DMA, 16)))
return ret;
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
- register_syscore_ops(&pxa2xx_clock_syscore_ops);
pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
ret = platform_add_devices(pxa25x_devices,
return ret;
}
- /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
- if (cpu_is_pxa255())
- clkdev_add(&pxa25x_hwuart_clkreg);
-
return ret;
}
#include "generic.h"
#include "devices.h"
-#include "clock.h"
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
void pxa27x_clear_otgph(void)
{
}
EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
-/* Crystal clock: 13MHz */
-#define BASE_CLK 13000000
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa27x_get_clk_frequency_khz(int info)
-{
- unsigned long ccsr, clkcfg;
- unsigned int l, L, m, M, n2, N, S;
- int cccr_a, t, ht, b;
-
- ccsr = CCSR;
- cccr_a = CCCR & (1 << 25);
-
- /* Read clkcfg register: it has turbo, b, half-turbo (and f) */
- asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
- t = clkcfg & (1 << 0);
- ht = clkcfg & (1 << 2);
- b = clkcfg & (1 << 3);
-
- l = ccsr & 0x1f;
- n2 = (ccsr>>7) & 0xf;
- m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
- L = l * BASE_CLK;
- N = (L * n2) / 2;
- M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
- S = (b) ? L : (L/2);
-
- if (info) {
- printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
- L / 1000000, (L % 1000000) / 10000, l );
- printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
- N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
- (t) ? "" : "in" );
- printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
- M / 1000000, (M % 1000000) / 10000, m );
- printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
- S / 1000000, (S % 1000000) / 10000 );
- }
-
- return (t) ? (N/1000) : (L/1000);
-}
-
-/*
- * Return the current mem clock frequency as reflected by CCCR[A], B, and L
- */
-static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
-{
- unsigned long ccsr, clkcfg;
- unsigned int l, L, m, M;
- int cccr_a, b;
-
- ccsr = CCSR;
- cccr_a = CCCR & (1 << 25);
-
- /* Read clkcfg register: it has turbo, b, half-turbo (and f) */
- asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
- b = clkcfg & (1 << 3);
-
- l = ccsr & 0x1f;
- m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
- L = l * BASE_CLK;
- M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-
- return M;
-}
-
-static const struct clkops clk_pxa27x_mem_ops = {
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable,
- .getrate = clk_pxa27x_mem_getrate,
-};
-
-/*
- * Return the current LCD clock frequency in units of 10kHz as
- */
-static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
-{
- unsigned long ccsr;
- unsigned int l, L, k, K;
-
- ccsr = CCSR;
-
- l = ccsr & 0x1f;
- k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;
-
- L = l * BASE_CLK;
- K = L / k;
-
- return (K / 10000);
-}
-
-static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
-{
- return pxa27x_get_lcdclk_frequency_10khz() * 10000;
-}
-
-static const struct clkops clk_pxa27x_lcd_ops = {
- .enable = clk_pxa2xx_cken_enable,
- .disable = clk_pxa2xx_cken_disable,
- .getrate = clk_pxa27x_lcd_getrate,
-};
-
-static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
-
-static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
-static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa27x_clkregs[] = {
- INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
- INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
- INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
- INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
- INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
- INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
- INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
- INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
- INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
- INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
- INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
- INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
- INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
- INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
- INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
- INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
- INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
- INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
- INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
- INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
- INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
- INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
- INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL),
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
reset_status = RCSR;
- clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
-
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
- register_syscore_ops(&pxa2xx_clock_syscore_ops);
- pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info);
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (!of_have_populated_dt()) {
+ pxa_register_device(&pxa27x_device_gpio,
+ &pxa27x_gpio_info);
+ ret = platform_add_devices(devices,
+ ARRAY_SIZE(devices));
+ }
}
return ret;
#include "generic.h"
#include "devices.h"
-#include "clock.h"
static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
MFP_ADDR_END,
};
-static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
-
-static struct clk_lookup common_clkregs[] = {
- INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
-static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
-
-static struct clk_lookup pxa310_clkregs[] = {
- INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
-};
-
static int __init pxa300_init(void)
{
if (cpu_is_pxa300() || cpu_is_pxa310()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa300_mfp_addr_map);
- clkdev_add_table(ARRAY_AND_SIZE(common_clkregs));
}
- if (cpu_is_pxa310()) {
+ if (cpu_is_pxa310())
mfp_init_addr(pxa310_mfp_addr_map);
- clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs));
- }
return 0;
}
#include "generic.h"
#include "devices.h"
-#include "clock.h"
static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
MFP_ADDR_END,
};
-static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
-
-static struct clk_lookup pxa320_clkregs[] = {
- INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
- INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
static int __init pxa320_init(void)
{
if (cpu_is_pxa320()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa320_mfp_addr_map);
- clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs));
}
return 0;
#include "generic.h"
#include "devices.h"
-#include "clock.h"
#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
-
-static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
-static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
-
-static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
-static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
-static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-
-static struct clk_lookup pxa3xx_clkregs[] = {
- INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
- /* Power I2C clock is always on */
- INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
- INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
- INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
- INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
- INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
- INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
- INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
- INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
- INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
- INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa3xx-ssp.0", NULL),
- INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa3xx-ssp.1", NULL),
- INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa3xx-ssp.2", NULL),
- INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa3xx-ssp.3", NULL),
- INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
- INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
- INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
- INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
- INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
- INIT_CLKREG(&clk_pxa3xx_gpio, "pxa3xx-gpio", NULL),
- INIT_CLKREG(&clk_pxa3xx_gpio, "pxa93x-gpio", NULL),
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
#ifdef CONFIG_PM
#define ISRAM_START 0x5c000000
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
- clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
-
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
- register_syscore_ops(&pxa3xx_clock_syscore_ops);
if (of_have_populated_dt())
return 0;
#include "generic.h"
#include "devices.h"
-#include "clock.h"
/* common GPIO definitions */
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
-#include "clock.h"
#include "devices.h"
static unsigned long tosa_pin_config[] = {
extern char rockchip_secondary_trampoline_end;
extern unsigned long rockchip_boot_fn;
-extern void rockchip_secondary_startup(void);
#include <linux/linkage.h>
#include <linux/init.h>
-ENTRY(rockchip_secondary_startup)
- mrc p15, 0, r0, c0, c0, 0 @ read main ID register
- ldr r1, =0x00000c09 @ Cortex-A9 primary part number
- teq r0, r1
- beq v7_invalidate_l1
- b secondary_startup
-ENDPROC(rockchip_secondary_startup)
-
ENTRY(rockchip_secondary_trampoline)
ldr pc, 1f
ENDPROC(rockchip_secondary_trampoline)
* sram_base_addr + 8: start address for pc
* */
udelay(10);
- writel(virt_to_phys(rockchip_secondary_startup),
- sram_base_addr + 8);
+ writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
writel(0xDEADBEAF, sram_base_addr + 4);
dsb_sev();
}
}
/* set the boot function for the sram code */
- rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup);
+ rockchip_boot_fn = virt_to_phys(secondary_startup);
/* copy the trampoline to sram, that runs during startup of the core */
memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SMSC_PHY if SH_ETH
- select SND_SOC_WM8978 if SND_SIMPLE_CARD
+ select SND_SOC_WM8978 if SND_SIMPLE_CARD && I2C
select USE_OF
config MACH_BOCKW
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4554 if SND_SIMPLE_CARD
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
select USE_OF
config MACH_BOCKW_REFERENCE
extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
unsigned long arg);
extern int shmobile_smp_cpu_disable(unsigned int cpu);
-extern void shmobile_invalidate_start(void);
extern void shmobile_boot_scu(void);
extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
* Boot code for secondary CPUs.
*
* First we turn on L1 cache coherency for our CPU. Then we jump to
- * shmobile_invalidate_start that invalidates the cache and hands over control
+ * secondary_startup that invalidates the cache and hands over control
* to the common ARM startup code.
*/
ENTRY(shmobile_boot_scu)
bic r2, r2, r3 @ Clear bits of our CPU (Run Mode)
str r2, [r0, #8] @ write back
- b shmobile_invalidate_start
+ b secondary_startup
ENDPROC(shmobile_boot_scu)
.text
#include <asm/assembler.h>
#include <asm/memory.h>
-#ifdef CONFIG_SMP
-ENTRY(shmobile_invalidate_start)
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(shmobile_invalidate_start)
-#endif
-
/*
* Reset vector for secondary CPUs.
* This will be mapped at address 0 by SBAR register.
int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
/* For this particular CPU register boot vector */
- shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0);
+ shmobile_smp_hook(cpu, virt_to_phys(secondary_startup), 0);
return apmu_wrap(cpu, apmu_power_on);
}
-config ARCH_SOCFPGA
+menuconfig ARCH_SOCFPGA
bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+ select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select MFD_SYSCON
+
+if ARCH_SOCFPGA
+config SOCFPGA_SUSPEND
+ bool "Suspend to RAM on SOCFPGA"
+ help
+ Select this if you want to enable Suspend-to-RAM on SOCFPGA
+ platforms.
+endif
obj-y := socfpga.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
+obj-$(CONFIG_SOCFPGA_SUSPEND) += pm.o self-refresh.o
/*
* Copyright 2012 Pavel Machek <pavel@denx.de>
- * Copyright (C) 2012 Altera Corporation
+ * Copyright (C) 2012-2015 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define SOCFPGA_RSTMGR_MODPERRST 0x14
#define SOCFPGA_RSTMGR_BRGMODRST 0x1c
+#define SOCFPGA_A10_RSTMGR_MODMPURST 0x20
+
/* System Manager bits */
#define RSTMGR_CTRL_SWCOLDRSTREQ 0x1 /* Cold Reset */
#define RSTMGR_CTRL_SWWARMRSTREQ 0x2 /* Warm Reset */
#define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */
-extern void socfpga_secondary_startup(void);
-extern void __iomem *socfpga_scu_base_addr;
-
extern void socfpga_init_clocks(void);
extern void socfpga_sysmgr_init(void);
extern void __iomem *sys_manager_base_addr;
extern void __iomem *rst_manager_base_addr;
+extern void __iomem *sdr_ctl_base_addr;
+
+u32 socfpga_sdram_self_refresh(u32 sdr_base);
+extern unsigned int socfpga_sdram_self_refresh_sz;
-extern struct smp_operations socfpga_smp_ops;
extern char secondary_trampoline, secondary_trampoline_end;
extern unsigned long socfpga_cpu1start_addr;
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/memory.h>
+#include <asm/assembler.h>
.arch armv7-a
* Thus, we can just subtract the PAGE_OFFSET to get the physical
* address of &cpu1start_addr. This would not work for platforms
* where the physical memory does not start at 0x0.
- */
+ */
+ARM_BE8(setend be)
adr r0, 1f
ldmia r0, {r1, r2}
sub r2, r2, #PAGE_OFFSET
ldr r3, [r2]
ldr r4, [r3]
+ARM_BE8(rev r4, r4)
bx r4
.align
1: .long .
.long socfpga_cpu1start_addr
ENTRY(secondary_trampoline_end)
-
-ENTRY(socfpga_secondary_startup)
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(socfpga_secondary_startup)
memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
- writel(virt_to_phys(socfpga_secondary_startup),
+ writel(virt_to_phys(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
flush_cache_all();
return 0;
}
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init socfpga_smp_init_cpus(void)
+static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- unsigned int i, ncores;
+ int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
- ncores = scu_get_core_count(socfpga_scu_base_addr);
+ if (socfpga_cpu1start_addr) {
+ writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
+ SOCFPGA_A10_RSTMGR_MODMPURST);
+ memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
+ writel(virt_to_phys(secondary_startup),
+ sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
- /* sanity check */
- if (ncores > num_possible_cpus()) {
- pr_warn("socfpga: no. of cores (%d) greater than configured"
- "maximum of %d - clipping\n", ncores, num_possible_cpus());
- ncores = num_possible_cpus();
+ flush_cache_all();
+ smp_wmb();
+ outer_clean_range(0, trampoline_size);
+
+ /* This will release CPU #1 out of reset. */
+ writel(0, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_MODMPURST);
}
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
+ return 0;
}
static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
{
+ struct device_node *np;
+ void __iomem *socfpga_scu_base_addr;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!np) {
+ pr_err("%s: missing scu\n", __func__);
+ return;
+ }
+
+ socfpga_scu_base_addr = of_iomap(np, 0);
+ if (!socfpga_scu_base_addr)
+ return;
scu_enable(socfpga_scu_base_addr);
}
cpu_do_idle();
}
-struct smp_operations socfpga_smp_ops __initdata = {
- .smp_init_cpus = socfpga_smp_init_cpus,
+static struct smp_operations socfpga_smp_ops __initdata = {
.smp_prepare_cpus = socfpga_smp_prepare_cpus,
.smp_boot_secondary = socfpga_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = socfpga_cpu_die,
#endif
};
+
+static struct smp_operations socfpga_a10_smp_ops __initdata = {
+ .smp_prepare_cpus = socfpga_smp_prepare_cpus,
+ .smp_boot_secondary = socfpga_a10_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = socfpga_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(socfpga_smp, "altr,socfpga-smp", &socfpga_smp_ops);
+CPU_METHOD_OF_DECLARE(socfpga_a10_smp, "altr,socfpga-a10-smp", &socfpga_a10_smp_ops);
--- /dev/null
+/*
+ * arch/arm/mach-socfpga/pm.c
+ *
+ * Copyright (C) 2014-2015 Altera Corporation. All rights reserved.
+ *
+ * with code from pm-imx6.c
+ * Copyright 2011-2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/bitops.h>
+#include <linux/genalloc.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/fncpy.h>
+#include "core.h"
+
+/* Pointer to function copied to ocram */
+static u32 (*socfpga_sdram_self_refresh_in_ocram)(u32 sdr_base);
+
+static int socfpga_setup_ocram_self_refresh(void)
+{
+ struct platform_device *pdev;
+ phys_addr_t ocram_pbase;
+ struct device_node *np;
+ struct gen_pool *ocram_pool;
+ unsigned long ocram_base;
+ void __iomem *suspend_ocram_base;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "mmio-sram");
+ if (!np) {
+ pr_err("%s: Unable to find mmio-sram in dtb\n", __func__);
+ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ pr_warn("%s: failed to find ocram device!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_pool = dev_get_gen_pool(&pdev->dev);
+ if (!ocram_pool) {
+ pr_warn("%s: ocram pool unavailable!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
+ if (!ocram_base) {
+ pr_warn("%s: unable to alloc ocram!\n", __func__);
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+
+ suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
+ socfpga_sdram_self_refresh_sz,
+ false);
+ if (!suspend_ocram_base) {
+ pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ /* Copy the code that puts DDR in self refresh to ocram */
+ socfpga_sdram_self_refresh_in_ocram =
+ (void *)fncpy(suspend_ocram_base,
+ &socfpga_sdram_self_refresh,
+ socfpga_sdram_self_refresh_sz);
+
+ WARN(!socfpga_sdram_self_refresh_in_ocram,
+ "could not copy function to ocram");
+ if (!socfpga_sdram_self_refresh_in_ocram)
+ ret = -EFAULT;
+
+put_node:
+ of_node_put(np);
+
+ return ret;
+}
+
+static int socfpga_pm_suspend(unsigned long arg)
+{
+ u32 ret;
+
+ if (!sdr_ctl_base_addr)
+ return -EFAULT;
+
+ ret = socfpga_sdram_self_refresh_in_ocram((u32)sdr_ctl_base_addr);
+
+ pr_debug("%s self-refresh loops request=%d exit=%d\n", __func__,
+ ret & 0xffff, (ret >> 16) & 0xffff);
+
+ return 0;
+}
+
+static int socfpga_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ outer_disable();
+ cpu_suspend(0, socfpga_pm_suspend);
+ outer_resume();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct platform_suspend_ops socfpga_pm_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = socfpga_pm_enter,
+};
+
+static int __init socfpga_pm_init(void)
+{
+ int ret;
+
+ ret = socfpga_setup_ocram_self_refresh();
+ if (ret)
+ return ret;
+
+ suspend_set_ops(&socfpga_pm_ops);
+ pr_info("SoCFPGA initialized for DDR self-refresh during suspend.\n");
+
+ return 0;
+}
+arch_initcall(socfpga_pm_init);
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#define MAX_LOOP_COUNT 1000
+
+/* Register offset */
+#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x54
+#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x58
+
+/* Bitfield positions */
+#define SELFRSHREQ_POS 3
+#define SELFRSHREQ_MASK 0x8
+
+#define SELFRFSHACK_POS 1
+#define SELFRFSHACK_MASK 0x2
+
+ /*
+ * This code assumes that when the bootloader configured
+ * the sdram controller for the DDR on the board it
+ * configured the following fields depending on the DDR
+ * vendor/configuration:
+ *
+ * sdr.ctrlcfg.lowpwreq.selfrfshmask
+ * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles
+ * sdr.ctrlcfg.dramtiming4.selfrfshexit
+ */
+
+ .arch armv7-a
+ .text
+ .align 3
+
+ /*
+ * socfpga_sdram_self_refresh
+ *
+ * r0 : sdr_ctl_base_addr
+ * r1 : temp storage of return value
+ * r2 : temp storage of register values
+ * r3 : loop counter
+ *
+ * return value: lower 16 bits: loop count going into self refresh
+ * upper 16 bits: loop count exiting self refresh
+ */
+ENTRY(socfpga_sdram_self_refresh)
+ /* Enable dynamic clock gating in the Power Control Register. */
+ mrc p15, 0, r2, c15, c0, 0
+ orr r2, r2, #1
+ mcr p15, 0, r2, c15, c0, 0
+
+ /* Enable self refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 1 */
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+ orr r2, r2, #SELFRSHREQ_MASK
+ str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+
+ /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 1 or hit max loops */
+ mov r3, #0
+while_ack_0:
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
+ and r2, r2, #SELFRFSHACK_MASK
+ cmp r2, #SELFRFSHACK_MASK
+ beq ack_1
+
+ add r3, #1
+ cmp r3, #MAX_LOOP_COUNT
+ bne while_ack_0
+
+ack_1:
+ mov r1, r3
+
+ /*
+ * Execute an ISB instruction to ensure that all of the
+ * CP15 register changes have been committed.
+ */
+ isb
+
+ /*
+ * Execute a barrier instruction to ensure that all cache,
+ * TLB and branch predictor maintenance operations issued
+ * by any CPU in the cluster have completed.
+ */
+ dsb
+ dmb
+
+ wfi
+
+ /* Disable self-refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 0 */
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+ bic r2, r2, #SELFRSHREQ_MASK
+ str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR]
+
+ /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 0 or hit max loops */
+ mov r3, #0
+while_ack_1:
+ ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR]
+ and r2, r2, #SELFRFSHACK_MASK
+ cmp r2, #SELFRFSHACK_MASK
+ bne ack_0
+
+ add r3, #1
+ cmp r3, #MAX_LOOP_COUNT
+ bne while_ack_1
+
+ack_0:
+ /*
+ * Prepare return value:
+ * Shift loop count for exiting self refresh into upper 16 bits.
+ * Leave loop count for requesting self refresh in lower 16 bits.
+ */
+ mov r3, r3, lsl #16
+ add r1, r1, r3
+
+ /* Disable dynamic clock gating in the Power Control Register. */
+ mrc p15, 0, r2, c15, c0, 0
+ bic r2, r2, #1
+ mcr p15, 0, r2, c15, c0, 0
+
+ mov r0, r1 @ return value
+ bx lr @ return
+
+ENDPROC(socfpga_sdram_self_refresh)
+ENTRY(socfpga_sdram_self_refresh_sz)
+ .word . - socfpga_sdram_self_refresh
/*
- * Copyright (C) 2012 Altera Corporation
+ * Copyright (C) 2012-2015 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "core.h"
-void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
void __iomem *sys_manager_base_addr;
void __iomem *rst_manager_base_addr;
+void __iomem *sdr_ctl_base_addr;
unsigned long socfpga_cpu1start_addr;
-static struct map_desc scu_io_desc __initdata = {
- .virtual = SOCFPGA_SCU_VIRT_BASE,
- .pfn = 0, /* run-time */
- .length = SZ_8K,
- .type = MT_DEVICE,
-};
-
-static struct map_desc uart_io_desc __initdata = {
- .virtual = 0xfec02000,
- .pfn = __phys_to_pfn(0xffc02000),
- .length = SZ_8K,
- .type = MT_DEVICE,
-};
-
-static void __init socfpga_scu_map_io(void)
-{
- unsigned long base;
-
- /* Get SCU base */
- asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
-
- scu_io_desc.pfn = __phys_to_pfn(base);
- iotable_init(&scu_io_desc, 1);
-}
-
-static void __init socfpga_map_io(void)
-{
- socfpga_scu_map_io();
- iotable_init(&uart_io_desc, 1);
- early_printk("Early printk initialized\n");
-}
-
void __init socfpga_sysmgr_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");
rst_manager_base_addr = of_iomap(np, 0);
+
+ np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl");
+ sdr_ctl_base_addr = of_iomap(np, 0);
}
static void __init socfpga_init_irq(void)
DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
- .smp = smp_ops(socfpga_smp_ops),
- .map_io = socfpga_map_io,
.init_irq = socfpga_init_irq,
.restart = socfpga_cyclone5_restart,
.dt_compat = altera_dt_match,
menuconfig ARCH_STI
bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
select ARM_GIC
+ select ST_IRQCHIP
select ARM_GLOBAL_TIMER
select PINCTRL
select PINCTRL_ST
--- /dev/null
+obj-y += board-dt.o
--- /dev/null
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
--- /dev/null
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <asm/v7m.h>
+#include <asm/mach/arch.h>
+
+static const char *const stm32_compat[] __initconst = {
+ "st,stm32f429",
+ NULL
+};
+
+DT_MACHINE_START(STM32DT, "STM32 (Device Tree Support)")
+ .dt_compat = stm32_compat,
+ .restart = armv7m_restart,
+MACHINE_END
.smp_boot_secondary = sun6i_smp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(sun6i_a31_smp, "allwinner,sun6i-a31", &sun6i_smp_ops);
+
+static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *node;
+
+ node = of_find_compatible_node(NULL, NULL, "allwinner,sun8i-a23-prcm");
+ if (!node) {
+ pr_err("Missing A23 PRCM node in the device tree\n");
+ return;
+ }
+
+ prcm_membase = of_iomap(node, 0);
+ if (!prcm_membase) {
+ pr_err("Couldn't map A23 PRCM registers\n");
+ return;
+ }
+
+ node = of_find_compatible_node(NULL, NULL,
+ "allwinner,sun8i-a23-cpuconfig");
+ if (!node) {
+ pr_err("Missing A23 CPU config node in the device tree\n");
+ return;
+ }
+
+ cpucfg_membase = of_iomap(node, 0);
+ if (!cpucfg_membase)
+ pr_err("Couldn't map A23 CPU config registers\n");
+
+}
+
+static int sun8i_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ u32 reg;
+
+ if (!(prcm_membase && cpucfg_membase))
+ return -EFAULT;
+
+ spin_lock(&cpu_lock);
+
+ /* Set CPU boot address */
+ writel(virt_to_phys(secondary_startup),
+ cpucfg_membase + CPUCFG_PRIVATE0_REG);
+
+ /* Assert the CPU core in reset */
+ writel(0, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu));
+
+ /* Assert the L1 cache in reset */
+ reg = readl(cpucfg_membase + CPUCFG_GEN_CTRL_REG);
+ writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_GEN_CTRL_REG);
+
+ /* Clear CPU power-off gating */
+ reg = readl(prcm_membase + PRCM_CPU_PWROFF_REG);
+ writel(reg & ~BIT(cpu), prcm_membase + PRCM_CPU_PWROFF_REG);
+ mdelay(1);
+
+ /* Deassert the CPU core reset */
+ writel(3, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu));
+
+ spin_unlock(&cpu_lock);
+
+ return 0;
+}
+
+struct smp_operations sun8i_smp_ops __initdata = {
+ .smp_prepare_cpus = sun8i_smp_prepare_cpus,
+ .smp_boot_secondary = sun8i_smp_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(sun8i_a23_smp, "allwinner,sun8i-a23", &sun8i_smp_ops);
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o
endif
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
#include "iomap.h"
#include "irq.h"
#include "pm.h"
+#include "reset.h"
#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_SMP
-static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
-
static int tegra20_reset_sleeping_cpu_1(void)
{
int ret = 0;
tegra_pen_lock();
- if (readl(pmc + PMC_SCRATCH41) == CPU_RESETTABLE)
+ if (readb(tegra20_cpu1_resettable_status) == CPU_RESETTABLE)
tegra20_cpu_shutdown(1);
else
ret = -EINVAL;
+++ /dev/null
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include "sleep.h"
-
- .section ".text.head", "ax"
-
-ENTRY(tegra_secondary_startup)
- check_cpu_part_num 0xc09, r8, r9
- bleq v7_invalidate_l1
- b secondary_startup
-ENDPROC(tegra_secondary_startup)
cmp r6, #TEGRA20
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
- mov32 r5, TEGRA_PMC_BASE
- mov r0, #0
+ mov32 r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
+ mov r0, #CPU_NOT_RESETTABLE
cmp r10, #0
- strne r0, [r5, #PMC_SCRATCH41]
+ strneb r0, [r5, #__tegra20_cpu1_resettable_status_offset]
1:
#endif
.rept TEGRA_RESET_DATA_SIZE
.long 0
.endr
+ .globl __tegra20_cpu1_resettable_status_offset
+ .equ __tegra20_cpu1_resettable_status_offset, \
+ . - __tegra_cpu_reset_handler_start
+ .byte 0
.align L1_CACHE_SHIFT
ENTRY(__tegra_cpu_reset_handler_end)
__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
*((u32 *)cpu_possible_mask);
__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
- virt_to_phys((void *)tegra_secondary_startup);
+ virt_to_phys((void *)secondary_startup);
#endif
#ifdef CONFIG_PM_SLEEP
void __tegra_cpu_reset_handler_start(void);
void __tegra_cpu_reset_handler(void);
+void __tegra20_cpu1_resettable_status_offset(void);
void __tegra_cpu_reset_handler_end(void);
-void tegra_secondary_startup(void);
#ifdef CONFIG_PM_SLEEP
#define tegra_cpu_lp1_mask \
(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
(u32)__tegra_cpu_reset_handler_start)))
+#define tegra20_cpu1_resettable_status \
+ (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+ (u32)__tegra20_cpu1_resettable_status_offset))
#endif
#define tegra_cpu_reset_handler_offset \
ENTRY(tegra20_cpu_shutdown)
cmp r0, #0
reteq lr @ must not be called for CPU 0
- mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+ mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
+ ldr r2, =__tegra20_cpu1_resettable_status_offset
mov r12, #CPU_RESETTABLE
- str r12, [r1]
+ strb r12, [r1, r2]
cpu_to_halt_reg r1, r0
ldr r3, =TEGRA_FLOW_CTRL_VIRT
/*
* tegra20_cpu_clear_resettable(void)
*
- * Called to clear the "resettable soon" flag in PMC_SCRATCH41 when
+ * Called to clear the "resettable soon" flag in IRAM variable when
* it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_clear_resettable)
- mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+ mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
+ ldr r2, =__tegra20_cpu1_resettable_status_offset
mov r12, #CPU_NOT_RESETTABLE
- str r12, [r1]
+ strb r12, [r1, r2]
ret lr
ENDPROC(tegra20_cpu_clear_resettable)
/*
* tegra20_cpu_set_resettable_soon(void)
*
- * Called to set the "resettable soon" flag in PMC_SCRATCH41 when
+ * Called to set the "resettable soon" flag in IRAM variable when
* it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_set_resettable_soon)
- mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
+ mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
+ ldr r2, =__tegra20_cpu1_resettable_status_offset
mov r12, #CPU_RESETTABLE_SOON
- str r12, [r1]
+ strb r12, [r1, r2]
ret lr
ENDPROC(tegra20_cpu_set_resettable_soon)
/*
* tegra20_cpu_is_resettable_soon(void)
*
- * Returns true if the "resettable soon" flag in PMC_SCRATCH41 has been
+ * Returns true if the "resettable soon" flag in IRAM variable has been
* set because it is expected that the secondary CPU will be idle soon.
*/
ENTRY(tegra20_cpu_is_resettable_soon)
- mov32 r1, TEGRA_PMC_VIRT + PMC_SCRATCH41
- ldr r12, [r1]
+ mov32 r1, TEGRA_IRAM_RESET_BASE_VIRT
+ ldr r2, =__tegra20_cpu1_resettable_status_offset
+ ldrb r12, [r1, r2]
cmp r12, #CPU_RESETTABLE_SOON
moveq r0, #1
movne r0, #0
mov r0, #TEGRA_FLUSH_CACHE_LOUIS
bl tegra_disable_clean_inv_dcache
- mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
+ mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT
+ ldr r4, =__tegra20_cpu1_resettable_status_offset
mov r3, #CPU_RESETTABLE
- str r3, [r0]
+ strb r3, [r0, r4]
bl tegra_cpu_do_idle
bl tegra_pen_lock
- mov32 r3, TEGRA_PMC_VIRT
- add r0, r3, #PMC_SCRATCH41
+ mov32 r0, TEGRA_IRAM_RESET_BASE_VIRT
+ ldr r4, =__tegra20_cpu1_resettable_status_offset
mov r3, #CPU_NOT_RESETTABLE
- str r3, [r0]
+ strb r3, [r0, r4]
bl tegra_pen_unlock
b __cpu_reset_again
/*
- * 38 nop's, which fills reset of wfe cache line and
+ * 38 nop's, which fills rest of wfe cache line and
* 4 more cachelines with nop
*/
.rept 38
#define __MACH_TEGRA_SLEEP_H
#include "iomap.h"
+#include "irammap.h"
#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
+ IO_CPU_VIRT)
+ IO_APB_VIRT)
#define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
+#define TEGRA_IRAM_RESET_BASE_VIRT (IO_IRAM_VIRT + \
+ TEGRA_IRAM_RESET_HANDLER_OFFSET)
+
/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
#define PMC_SCRATCH37 0x130
#define PMC_SCRATCH38 0x134
.init_irq = tegra_dt_init_irq,
.init_machine = tegra_dt_init,
.init_late = tegra_dt_init_late,
- .restart = tegra_pmc_restart,
.dt_compat = tegra_dt_board_compat,
MACHINE_END
--- /dev/null
+config ARCH_UNIPHIER
+ bool "Socionext UniPhier SoCs"
+ depends on ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GLOBAL_TIMER
+ select ARM_GIC
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ help
+ Support for UniPhier SoC family developed by Socionext Inc.
+ (formerly, System LSI Business Division of Panasonic Corporation)
--- /dev/null
+obj-y := uniphier.o
+obj-$(CONFIG_SMP) += platsmp.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sizes.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <asm/smp.h>
+#include <asm/smp_scu.h>
+
+static struct regmap *sbcm_regmap;
+
+static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+{
+ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+ unsigned long scu_base_phys = 0;
+ void __iomem *scu_base;
+
+ sbcm_regmap = syscon_regmap_lookup_by_compatible(
+ "socionext,uniphier-system-bus-controller-misc");
+ if (IS_ERR(sbcm_regmap)) {
+ pr_err("failed to regmap system-bus-controller-misc\n");
+ goto err;
+ }
+
+ if (scu_a9_has_base())
+ scu_base_phys = scu_a9_get_base();
+
+ if (!scu_base_phys) {
+ pr_err("failed to get scu base\n");
+ goto err;
+ }
+
+ scu_base = ioremap(scu_base_phys, SZ_128);
+ if (!scu_base) {
+ pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys);
+ goto err;
+ }
+
+ scu_enable(scu_base);
+ iounmap(scu_base);
+
+ return;
+err:
+ pr_warn("disabling SMP\n");
+ init_cpu_present(&only_cpu_0);
+ sbcm_regmap = NULL;
+}
+
+static void __naked uniphier_secondary_startup(void)
+{
+ asm("bl v7_invalidate_l1\n"
+ "b secondary_startup\n");
+};
+
+static int uniphier_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ int ret;
+
+ if (!sbcm_regmap)
+ return -ENODEV;
+
+ ret = regmap_write(sbcm_regmap, 0x1208,
+ virt_to_phys(uniphier_secondary_startup));
+ if (!ret)
+ asm("sev"); /* wake up secondary CPU */
+
+ return ret;
+}
+
+struct smp_operations uniphier_smp_ops __initdata = {
+ .smp_prepare_cpus = uniphier_smp_prepare_cpus,
+ .smp_boot_secondary = uniphier_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
+ &uniphier_smp_ops);
--- /dev/null
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char * const uniphier_dt_compat[] __initconst = {
+ "socionext,ph1-sld3",
+ "socionext,ph1-ld4",
+ "socionext,ph1-pro4",
+ "socionext,ph1-sld8",
+ "socionext,ph1-pro5",
+ "socionext,proxstream2",
+ "socionext,ph1-ld6b",
+ NULL,
+};
+
+DT_MACHINE_START(UNIPHIER, "Socionext UniPhier")
+ .dt_compat = uniphier_dt_compat,
+MACHINE_END
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h>
static int __init ux500_l2x0_unlock(void)
{
int i;
- void __iomem *l2x0_base = __io_address(U8500_L2CC_BASE);
+ struct device_node *np;
+ void __iomem *l2x0_base;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+ l2x0_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!l2x0_base)
+ return -ENODEV;
/*
* Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
i * L2X0_LOCKDOWN_STRIDE);
}
+ iounmap(l2x0_base);
return 0;
}
.legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
};
-/* minimum static i/o mapping required to boot U8500 platforms */
-static struct map_desc u8500_uart_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
-};
-/* U8500 and U9540 common io_desc */
-static struct map_desc u8500_common_io_desc[] __initdata = {
- /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
- __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
-
- __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
-
- __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
-};
-
-/* U8500 IO map specific description */
-static struct map_desc u8500_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
-
-};
-
-/* U9540 IO map specific description */
-static struct map_desc u9540_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K),
- __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K),
-};
-
static void __init u8500_map_io(void)
{
- /*
- * Map the UARTs early so that the DEBUG_LL stuff continues to work.
- */
- iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));
-
- ux500_map_io();
-
- iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
-
- if (cpu_is_ux540_family())
- iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
- else
- iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+ debug_ll_io_init();
+ ux500_setup_id();
}
/*
static const char *db8500_read_soc_id(void)
{
- void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+ void __iomem *uid;
+ uid = ioremap(U8500_BB_UID_BASE, 0x20);
+ if (!uid)
+ return NULL;
/* Throw these device-specific numbers into the entropy pool */
add_device_randomness(uid, 0x14);
return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
readl((u32 *)uid+0),
readl((u32 *)uid+1), readl((u32 *)uid+2),
readl((u32 *)uid+3), readl((u32 *)uid+4));
+ iounmap(uid);
}
static struct device * __init db8500_soc_device_init(void)
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
*/
void __init ux500_init_irq(void)
{
+ struct device_node *np;
+ struct resource r;
+
gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND);
irqchip_init();
+ np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
+ of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ if (!r.start) {
+ pr_err("could not find PRCMU base resource\n");
+ return;
+ }
+ prcmu_early_init(r.start, r.end-r.start);
+ ux500_pm_init(r.start, r.end-r.start);
/*
* Init clocks here so that they are available for system timer
* initialization.
*/
if (cpu_is_u8500_family()) {
- prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
- ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
-
u8500_of_clk_init(U8500_CLKRST1_BASE,
U8500_CLKRST2_BASE,
U8500_CLKRST3_BASE,
U8500_CLKRST5_BASE,
U8500_CLKRST6_BASE);
} else if (cpu_is_u9540()) {
- prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
- ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
U8500_CLKRST6_BASE);
} else if (cpu_is_u8540()) {
- prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
- ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
U8500_CLKRST6_BASE);
* DB9540 0x413fc090 0xFFFFDBF4 0x009540xx
*/
-void __init ux500_map_io(void)
+void __init ux500_setup_id(void)
{
unsigned int cpuid = read_cpuid_id();
unsigned int asicid = 0;
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
#include "db8500-regs.h"
#include "id.h"
+static void __iomem *scu_base;
+static void __iomem *backupram;
+
/* This is called from headsmp.S to wakeup the secondary core */
extern void u8500_secondary_startup(void);
sync_cache_w(&pen_release);
}
-static void __iomem *scu_base_addr(void)
-{
- if (cpu_is_u8500_family() || cpu_is_ux540_family())
- return __io_address(U8500_SCU_BASE);
- else
- ux500_unknown_soc();
-
- return NULL;
-}
-
static DEFINE_SPINLOCK(boot_lock);
static void ux500_secondary_init(unsigned int cpu)
static void __init wakeup_secondary(void)
{
- void __iomem *backupram;
-
- if (cpu_is_u8500_family() || cpu_is_ux540_family())
- backupram = __io_address(U8500_BACKUPRAM0_BASE);
- else
- ux500_unknown_soc();
-
/*
* write the address of secondary startup into the backup ram register
* at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
*/
static void __init ux500_smp_init_cpus(void)
{
- void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
+ struct device_node *np;
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ scu_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!scu_base)
+ return;
+ backupram = ioremap(U8500_BACKUPRAM0_BASE, SZ_8K);
+ ncores = scu_get_core_count(scu_base);
/* sanity check */
if (ncores > nr_cpu_ids) {
static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
{
-
- scu_enable(scu_base_addr());
+ scu_enable(scu_base);
wakeup_secondary();
}
#include <linux/io.h>
#include <linux/suspend.h>
#include <linux/platform_data/arm-ux500-pm.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "db8500-regs.h"
#include "pm_domains.h"
#define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C)
static void __iomem *prcmu_base;
+static void __iomem *dist_base;
/* This function decouple the gic from the prcmu */
int prcmu_gic_decouple(void)
{
u32 pr; /* Pending register */
u32 er; /* Enable register */
- void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
int i;
/* 5 registers. STI & PPI not skipped */
int prcmu_copy_gic_settings(void)
{
u32 er; /* Enable register */
- void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
int i;
/* We skip the STI and PPI */
void __init ux500_pm_init(u32 phy_base, u32 size)
{
+ struct device_node *np;
+
prcmu_base = ioremap(phy_base, size);
if (!prcmu_base) {
pr_err("could not remap PRCMU for PM functions\n");
return;
}
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
+ dist_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!dist_base) {
+ pr_err("could not remap GIC dist base for PM functions\n");
+ return;
+ }
+
/*
* On watchdog reboot the GIC is in some cases decoupled.
* This will make sure that the GIC is correctly configured.
void ux500_restart(enum reboot_mode mode, const char *cmd);
-void __init ux500_map_io(void);
+void __init ux500_setup_id(void);
extern void __init ux500_init_irq(void);
extern void ux500_timer_init(void);
-#define __IO_DEV_DESC(x, sz) { \
- .virtual = IO_ADDRESS(x), \
- .pfn = __phys_to_pfn(x), \
- .length = sz, \
- .type = MT_DEVICE, \
-}
-
-#define __MEM_DEV_DESC(x, sz) { \
- .virtual = IO_ADDRESS(x), \
- .pfn = __phys_to_pfn(x), \
- .length = sz, \
- .type = MT_MEMORY_RWX, \
-}
-
extern struct smp_operations ux500_smp_ops;
extern void ux500_cpu_die(unsigned int cpu);
--- /dev/null
+menuconfig ARCH_ZX
+ bool "ZTE ZX family" if ARCH_MULTI_V7
+ help
+ Support for ZTE ZX-based family of processors. TV
+ set-top-box processor is supported. More will be
+ added soon.
+
+if ARCH_ZX
+
+config SOC_ZX296702
+ def_bool y
+ select ARM_GIC
+ select ARM_GLOBAL_TIMER
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ help
+ Support for ZTE ZX296702 SoC which is a dual core CortexA9MP
+endif
--- /dev/null
+obj-$(CONFIG_SOC_ZX296702) += zx296702.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_ZX_CORE_H
+#define __MACH_ZX_CORE_H
+
+extern void zx_resume_jump(void);
+extern size_t zx_suspend_iram_sz;
+extern unsigned long zx_secondary_startup_pa;
+
+void zx_secondary_startup(void);
+
+#endif /* __MACH_ZX_CORE_H */
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+ .align 3
+ .arm
+
+/* It runs from physical address */
+ENTRY(zx_resume_jump)
+ adr r1, zx_secondary_startup_pa
+ ldr r0, [r1]
+ bx r0
+ENDPROC(zx_resume_jump)
+
+ENTRY(zx_secondary_startup_pa)
+ .word zx_secondary_startup_pa
+
+ENTRY(zx_suspend_iram_sz)
+ .word . - zx_resume_jump
+ENDPROC(zx_secondary_startup_pa)
+
+
+ENTRY(zx_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(zx_secondary_startup)
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/fncpy.h>
+#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+
+#include "core.h"
+
+#define AON_SYS_CTRL_RESERVED1 0xa8
+
+#define BUS_MATRIX_REMAP_CONFIG 0x00
+
+#define PCU_CPU0_CTRL 0x00
+#define PCU_CPU1_CTRL 0x04
+#define PCU_CPU1_ST 0x0c
+#define PCU_GLOBAL_CTRL 0x14
+#define PCU_EXPEND_CONTROL 0x34
+
+#define ZX_IRAM_BASE 0x00200000
+
+static void __iomem *pcu_base;
+static void __iomem *matrix_base;
+static void __iomem *scu_base;
+
+void __init zx_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *np;
+ unsigned long base = 0;
+ void __iomem *aonsysctrl_base;
+ void __iomem *sys_iram;
+
+ base = scu_a9_get_base();
+ scu_base = ioremap(base, SZ_256);
+ if (!scu_base) {
+ pr_err("%s: failed to map scu\n", __func__);
+ return;
+ }
+
+ scu_enable(scu_base);
+
+ np = of_find_compatible_node(NULL, NULL, "zte,sysctrl");
+ if (!np) {
+ pr_err("%s: failed to find sysctrl node\n", __func__);
+ return;
+ }
+
+ aonsysctrl_base = of_iomap(np, 0);
+ if (!aonsysctrl_base) {
+ pr_err("%s: failed to map aonsysctrl\n", __func__);
+ of_node_put(np);
+ return;
+ }
+
+ /*
+ * Write the address of secondary startup into the
+ * system-wide flags register. The BootMonitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
+ */
+ __raw_writel(virt_to_phys(zx_secondary_startup),
+ aonsysctrl_base + AON_SYS_CTRL_RESERVED1);
+
+ iounmap(aonsysctrl_base);
+ of_node_put(np);
+
+ np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
+ pcu_base = of_iomap(np, 0);
+ of_node_put(np);
+ WARN_ON(!pcu_base);
+
+ np = of_find_compatible_node(NULL, NULL, "zte,zx-bus-matrix");
+ matrix_base = of_iomap(np, 0);
+ of_node_put(np);
+ WARN_ON(!matrix_base);
+
+ /* Map the first 4 KB IRAM for suspend usage */
+ sys_iram = __arm_ioremap_exec(ZX_IRAM_BASE, PAGE_SIZE, false);
+ zx_secondary_startup_pa = virt_to_phys(zx_secondary_startup);
+ fncpy(sys_iram, &zx_resume_jump, zx_suspend_iram_sz);
+}
+
+static int zx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ static bool first_boot = true;
+
+ if (first_boot) {
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ first_boot = false;
+ return 0;
+ }
+
+ /* Swap the base address mapping between IRAM and IROM */
+ writel_relaxed(0x1, matrix_base + BUS_MATRIX_REMAP_CONFIG);
+
+ /* Power on CPU1 */
+ writel_relaxed(0x0, pcu_base + PCU_CPU1_CTRL);
+
+ /* Wait for power on ack */
+ while (readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x4)
+ cpu_relax();
+
+ /* Swap back the mapping of IRAM and IROM */
+ writel_relaxed(0x0, matrix_base + BUS_MATRIX_REMAP_CONFIG);
+
+ return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static int zx_cpu_kill(unsigned int cpu)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(2000);
+
+ writel_relaxed(0x2, pcu_base + PCU_CPU1_CTRL);
+
+ while ((readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x3) != 0x0) {
+ if (time_after(jiffies, timeout)) {
+ pr_err("*** cpu1 poweroff timeout\n");
+ break;
+ }
+ }
+ return 1;
+}
+
+static void zx_cpu_die(unsigned int cpu)
+{
+ scu_power_mode(scu_base, SCU_PM_POWEROFF);
+ cpu_enter_lowpower();
+
+ while (1)
+ cpu_do_idle();
+}
+#endif
+
+static void zx_secondary_init(unsigned int cpu)
+{
+ scu_power_mode(scu_base, SCU_PM_NORMAL);
+}
+
+struct smp_operations zx_smp_ops __initdata = {
+ .smp_prepare_cpus = zx_smp_prepare_cpus,
+ .smp_secondary_init = zx_secondary_init,
+ .smp_boot_secondary = zx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = zx_cpu_kill,
+ .cpu_die = zx_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(zx_smp, "zte,zx296702-smp", &zx_smp_ops);
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+static const char *zx296702_dt_compat[] __initconst = {
+ "zte,zx296702",
+ NULL,
+};
+
+DT_MACHINE_START(ZX, "ZTE ZX296702 (Device Tree)")
+ .dt_compat = zx296702_dt_compat,
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+MACHINE_END
irqchip_init();
}
-static void zynq_system_reset(enum reboot_mode mode, const char *cmd)
-{
- zynq_slcr_system_reset();
-}
-
static const char * const zynq_dt_match[] = {
"xlnx,zynq-7000",
NULL
.init_time = zynq_timer_init,
.dt_compat = zynq_dt_match,
.reserve = zynq_memory_init,
- .restart = zynq_system_reset,
MACHINE_END
#ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__
-void zynq_secondary_startup(void);
-
extern int zynq_slcr_init(void);
extern int zynq_early_slcr_init(void);
-extern void zynq_slcr_system_reset(void);
extern void zynq_slcr_cpu_stop(int cpu);
extern void zynq_slcr_cpu_start(int cpu);
extern bool zynq_slcr_cpu_state_read(int cpu);
.globl zynq_secondary_trampoline_end
zynq_secondary_trampoline_end:
ENDPROC(zynq_secondary_trampoline)
-
-ENTRY(zynq_secondary_startup)
- bl v7_invalidate_l1
- b secondary_startup
-ENDPROC(zynq_secondary_startup)
}
EXPORT_SYMBOL(zynq_cpun_start);
-static int zynq_boot_secondary(unsigned int cpu,
- struct task_struct *idle)
+static int zynq_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- return zynq_cpun_start(virt_to_phys(zynq_secondary_startup), cpu);
+ return zynq_cpun_start(virt_to_phys(secondary_startup), cpu);
}
/*
*/
#include <linux/io.h>
+#include <linux/reboot.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
}
/**
- * zynq_slcr_system_reset - Reset the entire system.
+ * zynq_slcr_system_restart - Restart the entire system.
+ *
+ * @nb: Pointer to restart notifier block (unused)
+ * @action: Reboot mode (unused)
+ * @data: Restart handler private data (unused)
+ *
+ * Return: 0 always
*/
-void zynq_slcr_system_reset(void)
+static
+int zynq_slcr_system_restart(struct notifier_block *nb,
+ unsigned long action, void *data)
{
u32 reboot;
- /*
- * Unlock the SLCR then reset the system.
- * Note that this seems to require raw i/o
- * functions or there's a lockup?
- */
- zynq_slcr_unlock();
-
/*
* Clear 0x0F000000 bits of reboot status register to workaround
* the FSBL not loading the bitstream after soft-reboot
zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET);
zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET);
zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET);
+ return 0;
}
+static struct notifier_block zynq_slcr_restart_nb = {
+ .notifier_call = zynq_slcr_system_restart,
+ .priority = 192,
+};
+
/**
* zynq_slcr_cpu_start - Start cpu
* @cpu: cpu number
/* unlock the SLCR so that registers can be changed */
zynq_slcr_unlock();
+ register_restart_handler(&zynq_slcr_restart_nb);
+
pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
of_node_put(np);
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
- bl v7_flush_dcache_louis
+ bl v7_invalidate_l1
ldmia r12, {r0-r5, r7, r9, r11, lr}
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
#include <linux/omap-dma.h>
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
+#endif
+
/*
* MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
* channels that an instance of the SDMA IP block can support. Used
if (ret)
return ret;
- clk_enable(adc->clk);
+ clk_prepare_enable(adc->clk);
tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
{
struct adc_device *adc = platform_get_drvdata(pdev);
- clk_disable(adc->clk);
+ clk_disable_unprepare(adc->clk);
regulator_disable(adc->vdd);
return 0;
#define s3c_adc_resume NULL
#endif
-static struct platform_device_id s3c_adc_driver_ids[] = {
+static const struct platform_device_id s3c_adc_driver_ids[] = {
{
.name = "s3c24xx-adc",
.driver_data = TYPE_ADCV1,
set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
}
+/* Called by platforms on which we want to disable VFP because it may not be
+ * present on all CPUs within a SMP complex. Needs to be called prior to
+ * vfp_init().
+ */
+void vfp_disable(void)
+{
+ if (VFP_arch) {
+ pr_debug("%s: should be called prior to vfp_init\n", __func__);
+ return;
+ }
+ VFP_arch = 1;
+}
+
#ifdef CONFIG_CPU_PM
static int vfp_pm_suspend(void)
{
help
This enables support for Freescale LS2085A SOC.
+config ARCH_HISI
+ bool "Hisilicon SoC Family"
+ help
+ This enables support for Hisilicon ARMv8 SoC family
+
config ARCH_MEDIATEK
bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
select ARM_GIC
dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
+dts-dirs += hisilicon
dts-dirs += mediatek
dts-dirs += qcom
dts-dirs += sprd
phy-names = "sata-phy";
};
+ sbgpio: sbgpio@17001000{
+ compatible = "apm,xgene-gpio-sb";
+ reg = <0x0 0x17001000 0x0 0x400>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0x0 0x28 0x1>,
+ <0x0 0x29 0x1>,
+ <0x0 0x2a 0x1>,
+ <0x0 0x2b 0x1>,
+ <0x0 0x2c 0x1>,
+ <0x0 0x2d 0x1>;
+ };
+
rtc: rtc@10510000 {
compatible = "apm,xgene-rtc";
reg = <0x0 0x10510000 0x0 0x400>;
dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
always := $(dtb-y)
--- /dev/null
+ /*
+ * Devices shared by all Juno boards
+ */
+
+ memtimer: timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ clock-frequency = <50000000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+ frame@2a830000 {
+ frame-number = <1>;
+ interrupts = <0 60 4>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ gic: interrupt-controller@2c010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <2>;
+ #interrupt-cells = <3>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ ranges = <0 0 0 0x2c1c0000 0 0x40000>;
+ v2m_0: v2m@0 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0 0 0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c@7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter@71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci@7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci@7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* last 16MB of the first memory area is reserved for secure world use by firmware */
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000008 0x80000000 0x1 0x80000000>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
clock-output-names = "apb_pclk";
};
- soc_faxiclk: refclk533mhz {
+ soc_faxiclk: refclk400mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <533000000>;
+ clock-frequency = <400000000>;
clock-output-names = "faxi_clk";
};
regulator-always-on;
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <116>;
+ label = "POWER";
+ gpios = <&iofpga_gpio0 0 0x4>;
+ };
+ button@2 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <102>;
+ label = "HOME";
+ gpios = <&iofpga_gpio0 1 0x4>;
+ };
+ button@3 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <152>;
+ label = "RLOCK";
+ gpios = <&iofpga_gpio0 2 0x4>;
+ };
+ button@4 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <115>;
+ label = "VOL+";
+ gpios = <&iofpga_gpio0 3 0x4>;
+ };
+ button@5 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <114>;
+ label = "VOL-";
+ gpios = <&iofpga_gpio0 4 0x4>;
+ };
+ button@6 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ linux,code = <99>;
+ label = "NMI";
+ gpios = <&iofpga_gpio0 5 0x4>;
+ };
+ };
+
ethernet@2,00000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x00000000 0x10000>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
+ apbregs@010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x010000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "vexpress:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "vexpress:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "vexpress:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "vexpress:3";
+ linux,default-trigger = "cpu1";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "vexpress:4";
+ linux,default-trigger = "cpu2";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "vexpress:5";
+ linux,default-trigger = "cpu3";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "vexpress:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "vexpress:7";
+ default-state = "off";
+ };
+ };
+
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
};
+
+ iofpga_gpio0: gpio@1d0000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x1d0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
};
--- /dev/null
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r1)";
+ compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A57_L2>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ };
+
+ A57_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A57_0>,
+ <&A57_1>,
+ <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
+ };
+
+ #include "juno-base.dtsi"
+
+};
+
+&memtimer {
+ status = "okay";
+};
};
};
- memory@80000000 {
- device_type = "memory";
- /* last 16MB of the first memory area is reserved for secure world use by firmware */
- reg = <0x00000000 0x80000000 0x0 0x7f000000>,
- <0x00000008 0x80000000 0x1 0x80000000>;
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,gic-400", "arm,cortex-a15-gic";
- reg = <0x0 0x2c010000 0 0x1000>,
- <0x0 0x2c02f000 0 0x2000>,
- <0x0 0x2c04f000 0 0x2000>,
- <0x0 0x2c06f000 0 0x2000>;
- #address-cells = <0>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
<&A53_3>;
};
- /include/ "juno-clocks.dtsi"
-
- dma@7ff00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0x7ff00000 0 0x1000>;
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_faxiclk>;
- clock-names = "apb_pclk";
- };
-
- soc_uart0: uart@7ff80000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0 0x7ff80000 0x0 0x1000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- i2c@7ffa0000 {
- compatible = "snps,designware-i2c";
- reg = <0x0 0x7ffa0000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <400000>;
- i2c-sda-hold-time-ns = <500>;
- clocks = <&soc_smc50mhz>;
-
- dvi0: dvi-transmitter@70 {
- compatible = "nxp,tda998x";
- reg = <0x70>;
- };
-
- dvi1: dvi-transmitter@71 {
- compatible = "nxp,tda998x";
- reg = <0x71>;
- };
- };
-
- ohci@7ffb0000 {
- compatible = "generic-ohci";
- reg = <0x0 0x7ffb0000 0x0 0x10000>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- ehci@7ffc0000 {
- compatible = "generic-ehci";
- reg = <0x0 0x7ffc0000 0x0 0x10000>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_usb48mhz>;
- };
-
- memory-controller@7ffd0000 {
- compatible = "arm,pl354", "arm,primecell";
- reg = <0 0x7ffd0000 0 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- };
-
- smb {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 15>;
- interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
-
- /include/ "juno-motherboard.dtsi"
- };
+ #include "juno-base.dtsi"
};
--- /dev/null
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+/*Reserved 1MB memory for MCU*/
+/memreserve/ 0x05e00000 0x00100000;
+
+#include "hi6220.dtsi"
+
+/ {
+ model = "HiKey Development Board";
+ compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
--- /dev/null
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, Hisilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hi6220";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@f6801000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+ <0x0 0xf6802000 0 0x2000>, /* GICC */
+ <0x0 0xf6804000 0 0x2000>, /* GICH */
+ <0x0 0xf6806000 0 0x2000>; /* GICV */
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ao_ctrl: ao_ctrl@f7800000 {
+ compatible = "hisilicon,hi6220-aoctrl", "syscon";
+ reg = <0x0 0xf7800000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sys_ctrl: sys_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ media_ctrl: media_ctrl@f4410000 {
+ compatible = "hisilicon,hi6220-mediactrl", "syscon";
+ reg = <0x0 0xf4410000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pm_ctrl: pm_ctrl@f7032000 {
+ compatible = "hisilicon,hi6220-pmctrl", "syscon";
+ reg = <0x0 0xf7032000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: uart@f8015000 { /* console */
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf8015000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+ };
+};
#include "mt8173.dtsi"
/ {
- model = "mediatek,mt8173-evb";
+ model = "MediaTek MT8173 evaluation board";
+ compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
aliases {
serial0 = &uart0;
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc {
compatible = "simple-bus";
ranges;
- syscfg_pctl_a: syscfg_pctl_a@10005000 {
- compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
- reg = <0 0x10005000 0 0x1000>;
- };
-
- pio: pinctrl@0x10005000 {
+ /*
+ * Pinctrl access register at 0x10005000 through regmap.
+ * Register 0x1000b000 is used by EINT.
+ */
+ pio: pinctrl@10005000 {
compatible = "mediatek,mt8173-pinctrl";
- reg = <0 0x1000B000 0 0x1000>;
+ reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>;
pins-are-numbered;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ syscfg_pctl_a: syscfg_pctl_a@10005000 {
+ compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
};
sysirq: intpol-controller@10200620 {
compatible = "mediatek,mt8173-sysirq",
- "mediatek,mt6577-sysirq";
+ "mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
uart0: serial@11002000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
uart1: serial@11003000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
uart2: serial@11004000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
uart3: serial@11005000 {
compatible = "mediatek,mt8173-uart",
- "mediatek,mt6577-uart";
+ "mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
clocks = <&uart_clk>;
status = "disabled";
};
};
-
};
--- /dev/null
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+&pm8916_gpios {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8916_gpios_default>;
+
+ pm8916_gpios_default: default {
+ usb_hub_reset_pm {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usb_sw_sel_pm {
+ pins = "gpio2";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-disable;
+ };
+ usr_led_3_ctrl {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ usr_led_4_ctrl {
+ pins = "gpio4";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ };
+ };
+};
--- /dev/null
+
+#include <dt-bindings/gpio/gpio.h>
+
+&msmgpio {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&soc_gpios_default>;
+
+ soc_gpios_default: default {
+ usr_led_1_ctrl_default: usr_led_1_ctrl_default {
+ pins = "gpio21";
+ function = "gpio";
+ output-low;
+ };
+ usr_led_2_ctrl_default: usr_led_2_ctrl_default {
+ pins = "gpio120";
+ function = "gpio";
+ output-low;
+ };
+ };
+};
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+#include "apq8016-sbc-soc-pins.dtsi"
+#include "apq8016-sbc-pmic-pins.dtsi"
/ {
aliases {
*/
#include "msm8916.dtsi"
+#include "pm8916.dtsi"
/ {
aliases {
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- pinctrl@1000000 {
+ restart@4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0x4ab000 0x4>;
+ };
+
+ msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
+
+ spmi_bus: spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x200f000 0x001000>,
+ <0x2400000 0x400000>,
+ <0x2c00000 0x400000>,
+ <0x3800000 0x200000>,
+ <0x200a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
};
};
--- /dev/null
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+ usid0: pm8916@0 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000 0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8916_gpios: gpios@c000 {
+ compatible = "qcom,pm8916-gpio";
+ reg = <0xc000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_mpps: mpps@a000 {
+ compatible = "qcom,pm8916-mpp";
+ reg = <0xa000 0x400>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8916_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+ io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+ io-channel-names = "thermal";
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8916_vadc: vadc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100 0x100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ usb_in {
+ reg = <VADC_USBIN>;
+ qcom,pre-scaling = <1 10>;
+ };
+ vph_pwr {
+ reg = <VADC_VSYS>;
+ qcom,pre-scaling = <1 3>;
+ };
+ die_temp {
+ reg = <VADC_DIE_TEMP>;
+ };
+ ref_625mv {
+ reg = <VADC_REF_625MV>;
+ };
+ ref_1250v {
+ reg = <VADC_REF_1250MV>;
+ };
+ ref_gnd {
+ reg = <VADC_GND_REF>;
+ };
+ ref_vdd {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+ };
+
+ usid1: pm8916@1 {
+ compatible = "qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+++ /dev/null
-/*
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value. The bootloader will typically populate the memory
- * node.
- */
-
-/ {
- #address-cells = <2>;
- #size-cells = <1>;
- chosen { };
- aliases { };
- memory { device_type = "memory"; reg = <0 0 0>; };
-};
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_EXYNOS7=y
CONFIG_ARCH_FSL_LS2085A=y
+CONFIG_ARCH_HISI=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_SEATTLE=y
CONFIG_ARCH_TEGRA=y
CONFIG_SMSC911X=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_XGENE=y
#include <linux/compiler.h>
#include <linux/types.h>
#include <asm/byteorder.h>
+#include <asm/def_LPBlackfin.h>
#define __raw_readb bfin_read8
#define __raw_readw bfin_read16
# Makefile for the Cobalt micro systems family specific parts of the kernel
#
-obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
+obj-y := buttons.o irq.o lcd.o led.o mtd.o reset.o rtc.o serial.o setup.o time.o
obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_MTD_PHYSMAP) += mtd.o
#define _PAGE_PRESENT_SHIFT 0
#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
/* R2 or later cores check for RI/XI support to determine _PAGE_READ */
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
#define _PAGE_WRITE_SHIFT (_PAGE_PRESENT_SHIFT + 1)
#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT)
#else
#define _PAGE_SPLITTING (1 << _PAGE_SPLITTING_SHIFT)
/* Only R2 or newer cores have the XI bit */
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
#define _PAGE_NO_EXEC_SHIFT (_PAGE_SPLITTING_SHIFT + 1)
#else
#define _PAGE_GLOBAL_SHIFT (_PAGE_SPLITTING_SHIFT + 1)
#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
-#endif /* CONFIG_CPU_MIPSR2 */
+#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
#endif /* CONFIG_64BIT && CONFIG_MIPS_HUGE_TLB_SUPPORT */
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
/* XI - page cannot be executed */
#ifndef _PAGE_NO_EXEC_SHIFT
#define _PAGE_NO_EXEC_SHIFT (_PAGE_MODIFIED_SHIFT + 1)
#define _PAGE_GLOBAL_SHIFT (_PAGE_NO_READ_SHIFT + 1)
#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
-#else /* !CONFIG_CPU_MIPSR2 */
+#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR6 */
#define _PAGE_GLOBAL_SHIFT (_PAGE_MODIFIED_SHIFT + 1)
#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
-#endif /* CONFIG_CPU_MIPSR2 */
+#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1)
#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT)
*/
static inline uint64_t pte_to_entrylo(unsigned long pte_val)
{
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
if (cpu_has_rixi) {
int sa;
#ifdef CONFIG_32BIT
if (test_and_clear_tsk_thread_flag(prev, TIF_USEDMSA)) \
__fpsave = FP_SAVE_VECTOR; \
(last) = resume(prev, next, task_thread_info(next), __fpsave); \
- disable_msa(); \
} while (0)
#define finish_arch_switch(prev) \
if (cpu_has_userlocal) \
write_c0_userlocal(current_thread_info()->tp_value); \
__restore_watch(); \
+ disable_msa(); \
} while (0)
#endif /* _ASM_SWITCH_TO_H */
#
obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
- bonito-irq.o mem.o machtype.o platform.o
+ bonito-irq.o mem.o machtype.o platform.o serial.o
obj-$(CONFIG_PCI) += pci.o
#
# Serial port support
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
-obj-y += $(loongson-serial-m) $(loongson-serial-y)
obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
* We get 160 bytes stack space from calling function, but only use
* 11 * 8 byte (old backchain + r15 - r6) for storing registers.
*/
-#define STK_OFF (MAX_BPF_STACK + 8 + 4 + 4 + (160 - 11 * 8))
+#define STK_SPACE (MAX_BPF_STACK + 8 + 4 + 4 + 160)
+#define STK_160_UNUSED (160 - 11 * 8)
+#define STK_OFF (STK_SPACE - STK_160_UNUSED)
#define STK_OFF_TMP 160 /* Offset of tmp buffer on stack */
#define STK_OFF_HLEN 168 /* Offset of SKB header length on stack */
}
/* Setup stack and backchain */
if (jit->seen & SEEN_STACK) {
- /* lgr %bfp,%r15 (BPF frame pointer) */
- EMIT4(0xb9040000, BPF_REG_FP, REG_15);
+ if (jit->seen & SEEN_FUNC)
+ /* lgr %w1,%r15 (backchain) */
+ EMIT4(0xb9040000, REG_W1, REG_15);
+ /* la %bfp,STK_160_UNUSED(%r15) (BPF frame pointer) */
+ EMIT4_DISP(0x41000000, BPF_REG_FP, REG_15, STK_160_UNUSED);
/* aghi %r15,-STK_OFF */
EMIT4_IMM(0xa70b0000, REG_15, -STK_OFF);
if (jit->seen & SEEN_FUNC)
- /* stg %bfp,152(%r15) (backchain) */
- EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_FP, REG_0,
+ /* stg %w1,152(%r15) (backchain) */
+ EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0,
REG_15, 152);
}
/*
br r3
.section .fixup, "ax"
+99:
br r3
.previous
.section __ex_table, "a"
.align 2
-99:
.word 0b, 99b
.previous
box->phys_id = phys_id;
box->pci_dev = pdev;
box->pmu = pmu;
+ uncore_box_init(box);
pci_set_drvdata(pdev, box);
raw_spin_lock(&uncore_box_lock);
pmu = &type->pmus[j];
box = *per_cpu_ptr(pmu->box, cpu);
/* called by uncore_cpu_init? */
- if (box && box->phys_id >= 0)
+ if (box && box->phys_id >= 0) {
+ uncore_box_init(box);
continue;
+ }
for_each_online_cpu(k) {
exist = *per_cpu_ptr(pmu->box, k);
}
}
- if (box)
+ if (box) {
box->phys_id = phys_id;
+ uncore_box_init(box);
+ }
}
}
return 0;
return box->pmu->type->num_counters;
}
-static inline void uncore_box_init(struct intel_uncore_box *box)
-{
- if (!test_and_set_bit(UNCORE_BOX_FLAG_INITIATED, &box->flags)) {
- if (box->pmu->type->ops->init_box)
- box->pmu->type->ops->init_box(box);
- }
-}
-
static inline void uncore_disable_box(struct intel_uncore_box *box)
{
if (box->pmu->type->ops->disable_box)
static inline void uncore_enable_box(struct intel_uncore_box *box)
{
- uncore_box_init(box);
-
if (box->pmu->type->ops->enable_box)
box->pmu->type->ops->enable_box(box);
}
return box->pmu->type->ops->read_counter(box, event);
}
+static inline void uncore_box_init(struct intel_uncore_box *box)
+{
+ if (!test_and_set_bit(UNCORE_BOX_FLAG_INITIATED, &box->flags)) {
+ if (box->pmu->type->ops->init_box)
+ box->pmu->type->ops->init_box(box);
+ }
+}
+
static inline bool uncore_box_is_fake(struct intel_uncore_box *box)
{
return (box->phys_id < 0);
((1ULL << (n)) - 1)))
/* Haswell-EP Ubox */
-#define HSWEP_U_MSR_PMON_CTR0 0x705
-#define HSWEP_U_MSR_PMON_CTL0 0x709
+#define HSWEP_U_MSR_PMON_CTR0 0x709
+#define HSWEP_U_MSR_PMON_CTL0 0x705
#define HSWEP_U_MSR_PMON_FILTER 0x707
#define HSWEP_U_MSR_PMON_UCLK_FIXED_CTL 0x703
.name = "cbox",
.num_counters = 4,
.num_boxes = 18,
- .perf_ctr_bits = 44,
+ .perf_ctr_bits = 48,
.event_ctl = HSWEP_C0_MSR_PMON_CTL0,
.perf_ctr = HSWEP_C0_MSR_PMON_CTR0,
.event_mask = SNBEP_CBO_MSR_PMON_RAW_EVENT_MASK,
apic->divide_count);
}
+static void apic_update_lvtt(struct kvm_lapic *apic)
+{
+ u32 timer_mode = kvm_apic_get_reg(apic, APIC_LVTT) &
+ apic->lapic_timer.timer_mode_mask;
+
+ if (apic->lapic_timer.timer_mode != timer_mode) {
+ apic->lapic_timer.timer_mode = timer_mode;
+ hrtimer_cancel(&apic->lapic_timer.timer);
+ }
+}
+
static void apic_timer_expired(struct kvm_lapic *apic)
{
struct kvm_vcpu *vcpu = apic->vcpu;
apic_set_reg(apic, APIC_LVTT + 0x10 * i,
lvt_val | APIC_LVT_MASKED);
}
+ apic_update_lvtt(apic);
atomic_set(&apic->lapic_timer.pending, 0);
}
break;
- case APIC_LVTT: {
- u32 timer_mode = val & apic->lapic_timer.timer_mode_mask;
-
- if (apic->lapic_timer.timer_mode != timer_mode) {
- apic->lapic_timer.timer_mode = timer_mode;
- hrtimer_cancel(&apic->lapic_timer.timer);
- }
-
+ case APIC_LVTT:
if (!kvm_apic_sw_enabled(apic))
val |= APIC_LVT_MASKED;
val &= (apic_lvt_mask[0] | apic->lapic_timer.timer_mode_mask);
apic_set_reg(apic, APIC_LVTT, val);
+ apic_update_lvtt(apic);
break;
- }
case APIC_TMICT:
if (apic_lvtt_tscdeadline(apic))
for (i = 0; i < APIC_LVT_NUM; i++)
apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
- apic->lapic_timer.timer_mode = 0;
+ apic_update_lvtt(apic);
apic_set_reg(apic, APIC_LVT0,
SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT));
apic_update_ppr(apic);
hrtimer_cancel(&apic->lapic_timer.timer);
+ apic_update_lvtt(apic);
update_divide_count(apic);
start_apic_timer(apic);
apic->irr_pending = true;
u64 entry, gentry, *spte;
int npte;
bool remote_flush, local_flush, zap_page;
- union kvm_mmu_page_role mask = (union kvm_mmu_page_role) {
- .cr0_wp = 1,
- .cr4_pae = 1,
- .nxe = 1,
- .smep_andnot_wp = 1,
- .smap_andnot_wp = 1,
- };
+ union kvm_mmu_page_role mask = { };
+
+ mask.cr0_wp = 1;
+ mask.cr4_pae = 1;
+ mask.nxe = 1;
+ mask.smep_andnot_wp = 1;
+ mask.smap_andnot_wp = 1;
/*
* If we don't have indirect shadow pages, it means no page is
return NOTIFY_OK;
}
+/* hctx->ctxs will be freed in queue's release handler */
static void blk_mq_exit_hctx(struct request_queue *q,
struct blk_mq_tag_set *set,
struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
blk_mq_unregister_cpu_notifier(&hctx->cpu_notifier);
blk_free_flush_queue(hctx->fq);
- kfree(hctx->ctxs);
blk_mq_free_bitmap(&hctx->ctx_map);
}
unsigned int i;
/* hctx kobj stays in hctx */
- queue_for_each_hw_ctx(q, hctx, i)
+ queue_for_each_hw_ctx(q, hctx, i) {
+ if (!hctx)
+ continue;
+ kfree(hctx->ctxs);
kfree(hctx);
+ }
kfree(q->queue_hw_ctx);
/* allocate ext devt */
idr_preload(GFP_KERNEL);
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
idx = idr_alloc(&ext_devt_idr, part, 0, NR_EXT_DEVT, GFP_NOWAIT);
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
idr_preload_end();
if (idx < 0)
return;
if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
idr_remove(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
}
}
} else {
struct hd_struct *part;
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
part = idr_find(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
if (part && get_disk(part_to_disk(part))) {
*partno = part->partno;
disk = part_to_disk(part);
}
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
}
return disk;
config PATA_AT91
tristate "PATA support for AT91SAM9260"
depends on ARM && SOC_AT91SAM9
- depends on !ARCH_MULTIPLATFORM
help
This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
writel((cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
hpriv->mmio + AHCI_WINDOW_CTRL(i));
- writel(cs->base, hpriv->mmio + AHCI_WINDOW_BASE(i));
+ writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i));
writel(((cs->size - 1) & 0xffff0000),
hpriv->mmio + AHCI_WINDOW_SIZE(i));
}
#include <linux/ata.h>
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-smc.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/platform_data/atmel.h>
+#include <linux/regmap.h>
-#include <mach/at91sam9_smc.h>
#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
int max;
};
+struct regmap *smc;
+
+struct at91sam9_smc_generic_fields {
+ struct regmap_field *setup;
+ struct regmap_field *pulse;
+ struct regmap_field *cycle;
+ struct regmap_field *mode;
+} fields;
+
/**
* adjust_smc_value - adjust value for one of SMC registers.
* @value: adjusted value
{
int ret = 0;
int use_iordy;
- struct sam9_smc_config smc;
unsigned int t6z; /* data tristate time in ns */
unsigned int cycle; /* SMC Cycle width in MCK ticks */
unsigned int setup; /* SMC Setup width in MCK ticks */
dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
- /* SMC Setup Register */
- smc.nwe_setup = smc.nrd_setup = setup;
- smc.ncs_write_setup = smc.ncs_read_setup = 0;
- /* SMC Pulse Register */
- smc.nwe_pulse = smc.nrd_pulse = pulse;
- smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
- /* SMC Cycle Register */
- smc.write_cycle = smc.read_cycle = cycle;
- /* SMC Mode Register*/
- smc.tdf_cycles = tdf_cycles;
- smc.mode = info->mode;
-
- sam9_smc_configure(0, info->cs, &smc);
+ regmap_fields_write(fields.setup, info->cs,
+ AT91SAM9_SMC_NRDSETUP(setup) |
+ AT91SAM9_SMC_NWESETUP(setup) |
+ AT91SAM9_SMC_NCS_NRDSETUP(0) |
+ AT91SAM9_SMC_NCS_WRSETUP(0));
+ regmap_fields_write(fields.pulse, info->cs,
+ AT91SAM9_SMC_NRDPULSE(pulse) |
+ AT91SAM9_SMC_NWEPULSE(pulse) |
+ AT91SAM9_SMC_NCS_NRDPULSE(cs_pulse) |
+ AT91SAM9_SMC_NCS_WRPULSE(cs_pulse));
+ regmap_fields_write(fields.cycle, info->cs,
+ AT91SAM9_SMC_NRDCYCLE(cycle) |
+ AT91SAM9_SMC_NWECYCLE(cycle));
+ regmap_fields_write(fields.mode, info->cs, info->mode |
+ AT91_SMC_TDF_(tdf_cycles));
}
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct at91_ide_info *info = dev->link->ap->host->private_data;
unsigned int consumed;
+ unsigned int mode;
unsigned long flags;
- struct sam9_smc_config smc;
local_irq_save(flags);
- sam9_smc_read_mode(0, info->cs, &smc);
+ regmap_fields_read(fields.mode, info->cs, &mode);
/* set 16bit mode before writing data */
- smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
- sam9_smc_write_mode(0, info->cs, &smc);
+ regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
+ AT91_SMC_DBW_16);
consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
/* restore 8bit mode after data is written */
- smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
- sam9_smc_write_mode(0, info->cs, &smc);
+ regmap_fields_write(fields.mode, info->cs, (mode & ~AT91_SMC_DBW) |
+ AT91_SMC_DBW_8);
local_irq_restore(flags);
return consumed;
.cable_detect = ata_cable_40wire,
};
+static int at91sam9_smc_fields_init(struct device *dev)
+{
+ struct reg_field field = REG_FIELD(0, 0, 31);
+
+ field.id_size = 8;
+ field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ;
+
+ field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC);
+ fields.setup = devm_regmap_field_alloc(dev, smc, field);
+ if (IS_ERR(fields.setup))
+ return PTR_ERR(fields.setup);
+
+ field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC);
+ fields.pulse = devm_regmap_field_alloc(dev, smc, field);
+ if (IS_ERR(fields.pulse))
+ return PTR_ERR(fields.pulse);
+
+ field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC);
+ fields.cycle = devm_regmap_field_alloc(dev, smc, field);
+ if (IS_ERR(fields.cycle))
+ return PTR_ERR(fields.cycle);
+
+ field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC);
+ fields.mode = devm_regmap_field_alloc(dev, smc, field);
+ if (IS_ERR(fields.mode))
+ return PTR_ERR(fields.mode);
+
+ return 0;
+}
+
static int pata_at91_probe(struct platform_device *pdev)
{
struct at91_cf_data *board = dev_get_platdata(&pdev->dev);
irq = board->irq_pin;
+ smc = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "atmel,smc");
+ if (IS_ERR(smc))
+ return PTR_ERR(smc);
+
+ ret = at91sam9_smc_fields_init(dev);
+ if (ret < 0)
+ return ret;
+
/* init ata host */
host = ata_host_alloc(dev, 1);
},
{},
};
-MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+MODULE_DEVICE_TABLE(of, octeon_cf_match);
static struct platform_driver octeon_cf_driver = {
.probe = octeon_cf_probe,
config BLK_DEV_PMEM
tristate "Persistent memory block device support"
+ depends on HAS_IOMEM
help
Saying Y here will allow you to use a contiguous range of reserved
memory as one or more persistent block devices.
memset(&zram->stats, 0, sizeof(zram->stats));
zram->disksize = 0;
zram->max_comp_streams = 1;
+
set_capacity(zram->disk, 0);
+ part_stat_set_all(&zram->disk->part0, 0);
up_write(&zram->init_lock);
/* I/O operation under all of CPU are done so let's free */
config ARM_CCI
bool
+config ARM_CCI_PMU
+ bool
+ select ARM_CCI
+
config ARM_CCI400_COMMON
bool
select ARM_CCI
config ARM_CCI400_PMU
bool "ARM CCI400 PMU support"
- default y
- depends on ARM || ARM64
- depends on HW_PERF_EVENTS
+ depends on (ARM && CPU_V7) || ARM64
+ depends on PERF_EVENTS
select ARM_CCI400_COMMON
+ select ARM_CCI_PMU
help
- Support for PMU events monitoring on the ARM CCI cache coherent
- interconnect.
-
- If unsure, say Y
+ Support for PMU events monitoring on the ARM CCI-400 (cache coherent
+ interconnect). CCI-400 supports counting events related to the
+ connected slave/master interfaces.
config ARM_CCI400_PORT_CTRL
bool
Low level power management driver for CCI400 cache coherent
interconnect for ARM platforms.
+config ARM_CCI500_PMU
+ bool "ARM CCI500 PMU support"
+ default y
+ depends on (ARM && CPU_V7) || ARM64
+ depends on PERF_EVENTS
+ select ARM_CCI_PMU
+ help
+ Support for PMU events monitoring on the ARM CCI-500 cache coherent
+ interconnect. CCI-500 provides 8 independent event counters, which
+ can count events pertaining to the slave/master interfaces as well
+ as the internal events to the CCI.
+
+ If unsure, say Y
+
config ARM_CCN
bool "ARM CCN driver support"
depends on ARM || ARM64
static const struct of_device_id arm_cci_matches[] = {
#ifdef CONFIG_ARM_CCI400_COMMON
{.compatible = "arm,cci-400", .data = CCI400_PORTS_DATA },
+#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ { .compatible = "arm,cci-500", },
#endif
{},
};
-#ifdef CONFIG_ARM_CCI400_PMU
+#ifdef CONFIG_ARM_CCI_PMU
-#define DRIVER_NAME "CCI-400"
+#define DRIVER_NAME "ARM-CCI"
#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
#define CCI_PMCR 0x0100
#define CCI_PMU_OVRFLW_FLAG 1
-#define CCI_PMU_CNTR_BASE(idx) ((idx) * SZ_4K)
-
-#define CCI_PMU_CNTR_MASK ((1ULL << 32) -1)
+#define CCI_PMU_CNTR_SIZE(model) ((model)->cntr_size)
+#define CCI_PMU_CNTR_BASE(model, idx) ((idx) * CCI_PMU_CNTR_SIZE(model))
+#define CCI_PMU_CNTR_MASK ((1ULL << 32) -1)
+#define CCI_PMU_CNTR_LAST(cci_pmu) (cci_pmu->num_cntrs - 1)
-#define CCI_PMU_EVENT_MASK 0xffUL
-#define CCI_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7)
-#define CCI_PMU_EVENT_CODE(event) (event & 0x1f)
-
-#define CCI_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */
+#define CCI_PMU_MAX_HW_CNTRS(model) \
+ ((model)->num_hw_cntrs + (model)->fixed_hw_cntrs)
/* Types of interfaces that can generate events */
enum {
CCI_IF_SLAVE,
CCI_IF_MASTER,
+#ifdef CONFIG_ARM_CCI500_PMU
+ CCI_IF_GLOBAL,
+#endif
CCI_IF_MAX,
};
};
struct cci_pmu_hw_events {
- struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
- unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
+ struct perf_event **events;
+ unsigned long *used_mask;
raw_spinlock_t pmu_lock;
};
+struct cci_pmu;
+/*
+ * struct cci_pmu_model:
+ * @fixed_hw_cntrs - Number of fixed event counters
+ * @num_hw_cntrs - Maximum number of programmable event counters
+ * @cntr_size - Size of an event counter mapping
+ */
struct cci_pmu_model {
char *name;
+ u32 fixed_hw_cntrs;
+ u32 num_hw_cntrs;
+ u32 cntr_size;
+ u64 nformat_attrs;
+ u64 nevent_attrs;
+ struct dev_ext_attribute *format_attrs;
+ struct dev_ext_attribute *event_attrs;
struct event_range event_ranges[CCI_IF_MAX];
+ int (*validate_hw_event)(struct cci_pmu *, unsigned long);
+ int (*get_event_idx)(struct cci_pmu *, struct cci_pmu_hw_events *, unsigned long);
};
static struct cci_pmu_model cci_pmu_models[];
void __iomem *base;
struct pmu pmu;
int nr_irqs;
- int irqs[CCI_PMU_MAX_HW_EVENTS];
+ int *irqs;
unsigned long active_irqs;
const struct cci_pmu_model *model;
struct cci_pmu_hw_events hw_events;
struct platform_device *plat_device;
- int num_events;
+ int num_cntrs;
atomic_t active_events;
struct mutex reserve_mutex;
+ struct notifier_block cpu_nb;
cpumask_t cpus;
};
-static struct cci_pmu *pmu;
#define to_cci_pmu(c) (container_of(c, struct cci_pmu, pmu))
+enum cci_models {
+#ifdef CONFIG_ARM_CCI400_PMU
+ CCI400_R0,
+ CCI400_R1,
+#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ CCI500_R0,
+#endif
+ CCI_MODEL_MAX
+};
+
+static ssize_t cci_pmu_format_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t cci_pmu_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+#define CCI_EXT_ATTR_ENTRY(_name, _func, _config) \
+ { __ATTR(_name, S_IRUGO, _func, NULL), (void *)_config }
+
+#define CCI_FORMAT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci_pmu_format_show, (char *)_config)
+#define CCI_EVENT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci_pmu_event_show, (unsigned long)_config)
+
+/* CCI400 PMU Specific definitions */
+
+#ifdef CONFIG_ARM_CCI400_PMU
+
/* Port ids */
-#define CCI_PORT_S0 0
-#define CCI_PORT_S1 1
-#define CCI_PORT_S2 2
-#define CCI_PORT_S3 3
-#define CCI_PORT_S4 4
-#define CCI_PORT_M0 5
-#define CCI_PORT_M1 6
-#define CCI_PORT_M2 7
-
-#define CCI_REV_R0 0
-#define CCI_REV_R1 1
-#define CCI_REV_R1_PX 5
+#define CCI400_PORT_S0 0
+#define CCI400_PORT_S1 1
+#define CCI400_PORT_S2 2
+#define CCI400_PORT_S3 3
+#define CCI400_PORT_S4 4
+#define CCI400_PORT_M0 5
+#define CCI400_PORT_M1 6
+#define CCI400_PORT_M2 7
+
+#define CCI400_R1_PX 5
/*
* Instead of an event id to monitor CCI cycles, a dedicated counter is
* make use of this event in hardware.
*/
enum cci400_perf_events {
- CCI_PMU_CYCLES = 0xff
+ CCI400_PMU_CYCLES = 0xff
};
-#define CCI_PMU_CYCLE_CNTR_IDX 0
-#define CCI_PMU_CNTR0_IDX 1
-#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
+#define CCI400_PMU_CYCLE_CNTR_IDX 0
+#define CCI400_PMU_CNTR0_IDX 1
/*
* CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
* the different revisions and are used to validate the event to be monitored.
*/
-#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00
-#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13
-#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14
-#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a
+#define CCI400_PMU_EVENT_MASK 0xffUL
+#define CCI400_PMU_EVENT_SOURCE_SHIFT 5
+#define CCI400_PMU_EVENT_SOURCE_MASK 0x7
+#define CCI400_PMU_EVENT_CODE_SHIFT 0
+#define CCI400_PMU_EVENT_CODE_MASK 0x1f
+#define CCI400_PMU_EVENT_SOURCE(event) \
+ ((event >> CCI400_PMU_EVENT_SOURCE_SHIFT) & \
+ CCI400_PMU_EVENT_SOURCE_MASK)
+#define CCI400_PMU_EVENT_CODE(event) \
+ ((event >> CCI400_PMU_EVENT_CODE_SHIFT) & CCI400_PMU_EVENT_CODE_MASK)
+
+#define CCI400_R0_SLAVE_PORT_MIN_EV 0x00
+#define CCI400_R0_SLAVE_PORT_MAX_EV 0x13
+#define CCI400_R0_MASTER_PORT_MIN_EV 0x14
+#define CCI400_R0_MASTER_PORT_MAX_EV 0x1a
+
+#define CCI400_R1_SLAVE_PORT_MIN_EV 0x00
+#define CCI400_R1_SLAVE_PORT_MAX_EV 0x14
+#define CCI400_R1_MASTER_PORT_MIN_EV 0x00
+#define CCI400_R1_MASTER_PORT_MAX_EV 0x11
+
+#define CCI400_CYCLE_EVENT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci400_pmu_cycle_event_show, \
+ (unsigned long)_config)
+
+static ssize_t cci400_pmu_cycle_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static struct dev_ext_attribute cci400_pmu_format_attrs[] = {
+ CCI_FORMAT_EXT_ATTR_ENTRY(event, "config:0-4"),
+ CCI_FORMAT_EXT_ATTR_ENTRY(source, "config:5-7"),
+};
+
+static struct dev_ext_attribute cci400_r0_pmu_event_attrs[] = {
+ /* Slave events */
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_any, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_device, 0x01),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_normal_or_nonshareable, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_inner_or_outershareable, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_cache_maintenance, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_mem_barrier, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_sync_barrier, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg_sync, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_tt_full, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_last_hs_snoop, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_stall_rvalids_h_rready_l, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_any, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_device, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_normal_or_nonshareable, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_inner_or_outershare_wback_wclean, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_unique, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_line_unique, 0x11),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_evict, 0x12),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_stall_tt_full, 0x13),
+ /* Master events */
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_retry_speculative_fetch, 0x14),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_addr_hazard, 0x15),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_id_hazard, 0x16),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_tt_full, 0x17),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_barrier_hazard, 0x18),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_barrier_hazard, 0x19),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_tt_full, 0x1A),
+ /* Special event for cycles counter */
+ CCI400_CYCLE_EVENT_EXT_ATTR_ENTRY(cycles, 0xff),
+};
+
+static struct dev_ext_attribute cci400_r1_pmu_event_attrs[] = {
+ /* Slave events */
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_any, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_device, 0x01),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_normal_or_nonshareable, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_inner_or_outershareable, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_cache_maintenance, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_mem_barrier, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_sync_barrier, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg_sync, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_tt_full, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_last_hs_snoop, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_stall_rvalids_h_rready_l, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_any, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_device, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_normal_or_nonshareable, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_inner_or_outershare_wback_wclean, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_unique, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_write_line_unique, 0x11),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_evict, 0x12),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_stall_tt_full, 0x13),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_slave_id_hazard, 0x14),
+ /* Master events */
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_retry_speculative_fetch, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_stall_cycle_addr_hazard, 0x1),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_master_id_hazard, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_hi_prio_rtq_full, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_barrier_hazard, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_barrier_hazard, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_wtq_full, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_low_prio_rtq_full, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_mid_prio_rtq_full, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn0, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn1, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn2, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall_qvn_vn3, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn0, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn1, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn2, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall_qvn_vn3, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_unique_or_line_unique_addr_hazard, 0x11),
+ /* Special event for cycles counter */
+ CCI400_CYCLE_EVENT_EXT_ATTR_ENTRY(cycles, 0xff),
+};
-#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00
-#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14
-#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00
-#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11
+static ssize_t cci400_pmu_cycle_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ return snprintf(buf, PAGE_SIZE, "config=0x%lx\n", (unsigned long)eattr->var);
+}
-static int pmu_validate_hw_event(unsigned long hw_event)
+static int cci400_get_event_idx(struct cci_pmu *cci_pmu,
+ struct cci_pmu_hw_events *hw,
+ unsigned long cci_event)
{
- u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
- u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
+ int idx;
+
+ /* cycles event idx is fixed */
+ if (cci_event == CCI400_PMU_CYCLES) {
+ if (test_and_set_bit(CCI400_PMU_CYCLE_CNTR_IDX, hw->used_mask))
+ return -EAGAIN;
+
+ return CCI400_PMU_CYCLE_CNTR_IDX;
+ }
+
+ for (idx = CCI400_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
+ if (!test_and_set_bit(idx, hw->used_mask))
+ return idx;
+
+ /* No counters available */
+ return -EAGAIN;
+}
+
+static int cci400_validate_hw_event(struct cci_pmu *cci_pmu, unsigned long hw_event)
+{
+ u8 ev_source = CCI400_PMU_EVENT_SOURCE(hw_event);
+ u8 ev_code = CCI400_PMU_EVENT_CODE(hw_event);
int if_type;
- if (hw_event & ~CCI_PMU_EVENT_MASK)
+ if (hw_event & ~CCI400_PMU_EVENT_MASK)
return -ENOENT;
+ if (hw_event == CCI400_PMU_CYCLES)
+ return hw_event;
+
switch (ev_source) {
- case CCI_PORT_S0:
- case CCI_PORT_S1:
- case CCI_PORT_S2:
- case CCI_PORT_S3:
- case CCI_PORT_S4:
+ case CCI400_PORT_S0:
+ case CCI400_PORT_S1:
+ case CCI400_PORT_S2:
+ case CCI400_PORT_S3:
+ case CCI400_PORT_S4:
/* Slave Interface */
if_type = CCI_IF_SLAVE;
break;
- case CCI_PORT_M0:
- case CCI_PORT_M1:
- case CCI_PORT_M2:
+ case CCI400_PORT_M0:
+ case CCI400_PORT_M1:
+ case CCI400_PORT_M2:
/* Master Interface */
if_type = CCI_IF_MASTER;
break;
return -ENOENT;
}
- if (ev_code >= pmu->model->event_ranges[if_type].min &&
- ev_code <= pmu->model->event_ranges[if_type].max)
+ if (ev_code >= cci_pmu->model->event_ranges[if_type].min &&
+ ev_code <= cci_pmu->model->event_ranges[if_type].max)
return hw_event;
return -ENOENT;
}
-static int probe_cci_revision(void)
+static int probe_cci400_revision(void)
{
int rev;
rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
rev >>= CCI_PID2_REV_SHIFT;
- if (rev < CCI_REV_R1_PX)
- return CCI_REV_R0;
+ if (rev < CCI400_R1_PX)
+ return CCI400_R0;
else
- return CCI_REV_R1;
+ return CCI400_R1;
}
static const struct cci_pmu_model *probe_cci_model(struct platform_device *pdev)
{
if (platform_has_secure_cci_access())
- return &cci_pmu_models[probe_cci_revision()];
+ return &cci_pmu_models[probe_cci400_revision()];
return NULL;
}
+#else /* !CONFIG_ARM_CCI400_PMU */
+static inline struct cci_pmu_model *probe_cci_model(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif /* CONFIG_ARM_CCI400_PMU */
+
+#ifdef CONFIG_ARM_CCI500_PMU
+
+/*
+ * CCI500 provides 8 independent event counters that can count
+ * any of the events available.
+ *
+ * CCI500 PMU event id is an 9-bit value made of two parts.
+ * bits [8:5] - Source for the event
+ * 0x0-0x6 - Slave interfaces
+ * 0x8-0xD - Master interfaces
+ * 0xf - Global Events
+ * 0x7,0xe - Reserved
+ *
+ * bits [4:0] - Event code (specific to type of interface)
+ */
+
+/* Port ids */
+#define CCI500_PORT_S0 0x0
+#define CCI500_PORT_S1 0x1
+#define CCI500_PORT_S2 0x2
+#define CCI500_PORT_S3 0x3
+#define CCI500_PORT_S4 0x4
+#define CCI500_PORT_S5 0x5
+#define CCI500_PORT_S6 0x6
+
+#define CCI500_PORT_M0 0x8
+#define CCI500_PORT_M1 0x9
+#define CCI500_PORT_M2 0xa
+#define CCI500_PORT_M3 0xb
+#define CCI500_PORT_M4 0xc
+#define CCI500_PORT_M5 0xd
+
+#define CCI500_PORT_GLOBAL 0xf
+
+#define CCI500_PMU_EVENT_MASK 0x1ffUL
+#define CCI500_PMU_EVENT_SOURCE_SHIFT 0x5
+#define CCI500_PMU_EVENT_SOURCE_MASK 0xf
+#define CCI500_PMU_EVENT_CODE_SHIFT 0x0
+#define CCI500_PMU_EVENT_CODE_MASK 0x1f
+
+#define CCI500_PMU_EVENT_SOURCE(event) \
+ ((event >> CCI500_PMU_EVENT_SOURCE_SHIFT) & CCI500_PMU_EVENT_SOURCE_MASK)
+#define CCI500_PMU_EVENT_CODE(event) \
+ ((event >> CCI500_PMU_EVENT_CODE_SHIFT) & CCI500_PMU_EVENT_CODE_MASK)
+
+#define CCI500_SLAVE_PORT_MIN_EV 0x00
+#define CCI500_SLAVE_PORT_MAX_EV 0x1f
+#define CCI500_MASTER_PORT_MIN_EV 0x00
+#define CCI500_MASTER_PORT_MAX_EV 0x06
+#define CCI500_GLOBAL_PORT_MIN_EV 0x00
+#define CCI500_GLOBAL_PORT_MAX_EV 0x0f
+
+
+#define CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(_name, _config) \
+ CCI_EXT_ATTR_ENTRY(_name, cci500_pmu_global_event_show, \
+ (unsigned long) _config)
+
+static ssize_t cci500_pmu_global_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static struct dev_ext_attribute cci500_pmu_format_attrs[] = {
+ CCI_FORMAT_EXT_ATTR_ENTRY(event, "config:0-4"),
+ CCI_FORMAT_EXT_ATTR_ENTRY(source, "config:5-8"),
+};
+
+static struct dev_ext_attribute cci500_pmu_event_attrs[] = {
+ /* Slave events */
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_arvalid, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_dev, 0x1),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_nonshareable, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_shareable_non_alloc, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_shareable_alloc, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_invalidate, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_cache_maint, 0x6),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_dvm_msg, 0x7),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_rval, 0x8),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_hs_rlast_snoop, 0x9),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_hs_awalid, 0xA),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_dev, 0xB),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_non_shareable, 0xC),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_share_wb, 0xD),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_share_wlu, 0xE),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_share_wunique, 0xF),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_evict, 0x10),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_wrevict, 0x11),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_w_data_beat, 0x12),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_acvalid, 0x13),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_read, 0x14),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_clean, 0x15),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_data_transfer_low, 0x16),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rrq_stall_arvalid, 0x17),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_data_stall, 0x18),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_wrq_stall, 0x19),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_w_data_stall, 0x1A),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_w_resp_stall, 0x1B),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_srq_stall, 0x1C),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_s_data_stall, 0x1D),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_rq_stall_ot_limit, 0x1E),
+ CCI_EVENT_EXT_ATTR_ENTRY(si_r_stall_arbit, 0x1F),
+
+ /* Master events */
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_r_data_beat_any, 0x0),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_w_data_beat_any, 0x1),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_rrq_stall, 0x2),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_r_data_stall, 0x3),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_wrq_stall, 0x4),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_w_data_stall, 0x5),
+ CCI_EVENT_EXT_ATTR_ENTRY(mi_w_resp_stall, 0x6),
+
+ /* Global events */
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_0_1, 0x0),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_2_3, 0x1),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_4_5, 0x2),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_filter_bank_6_7, 0x3),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_0_1, 0x4),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_2_3, 0x5),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_4_5, 0x6),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_access_miss_filter_bank_6_7, 0x7),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_back_invalidation, 0x8),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_stall_alloc_busy, 0x9),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_stall_tt_full, 0xA),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_wrq, 0xB),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_cd_hs, 0xC),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_rq_stall_addr_hazard, 0xD),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snopp_rq_stall_tt_full, 0xE),
+ CCI500_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_tzmp1_prot, 0xF),
+};
+
+static ssize_t cci500_pmu_global_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ /* Global events have single fixed source code */
+ return snprintf(buf, PAGE_SIZE, "event=0x%lx,source=0x%x\n",
+ (unsigned long)eattr->var, CCI500_PORT_GLOBAL);
+}
+
+static int cci500_validate_hw_event(struct cci_pmu *cci_pmu,
+ unsigned long hw_event)
+{
+ u32 ev_source = CCI500_PMU_EVENT_SOURCE(hw_event);
+ u32 ev_code = CCI500_PMU_EVENT_CODE(hw_event);
+ int if_type;
+
+ if (hw_event & ~CCI500_PMU_EVENT_MASK)
+ return -ENOENT;
+
+ switch (ev_source) {
+ case CCI500_PORT_S0:
+ case CCI500_PORT_S1:
+ case CCI500_PORT_S2:
+ case CCI500_PORT_S3:
+ case CCI500_PORT_S4:
+ case CCI500_PORT_S5:
+ case CCI500_PORT_S6:
+ if_type = CCI_IF_SLAVE;
+ break;
+ case CCI500_PORT_M0:
+ case CCI500_PORT_M1:
+ case CCI500_PORT_M2:
+ case CCI500_PORT_M3:
+ case CCI500_PORT_M4:
+ case CCI500_PORT_M5:
+ if_type = CCI_IF_MASTER;
+ break;
+ case CCI500_PORT_GLOBAL:
+ if_type = CCI_IF_GLOBAL;
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ if (ev_code >= cci_pmu->model->event_ranges[if_type].min &&
+ ev_code <= cci_pmu->model->event_ranges[if_type].max)
+ return hw_event;
+
+ return -ENOENT;
+}
+#endif /* CONFIG_ARM_CCI500_PMU */
+
+static ssize_t cci_pmu_format_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n", (char *)eattr->var);
+}
+
+static ssize_t cci_pmu_event_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ /* source parameter is mandatory for normal PMU events */
+ return snprintf(buf, PAGE_SIZE, "source=?,event=0x%lx\n",
+ (unsigned long)eattr->var);
+}
static int pmu_is_valid_counter(struct cci_pmu *cci_pmu, int idx)
{
- return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
- idx <= CCI_PMU_CNTR_LAST(cci_pmu);
+ return 0 <= idx && idx <= CCI_PMU_CNTR_LAST(cci_pmu);
}
-static u32 pmu_read_register(int idx, unsigned int offset)
+static u32 pmu_read_register(struct cci_pmu *cci_pmu, int idx, unsigned int offset)
{
- return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+ return readl_relaxed(cci_pmu->base +
+ CCI_PMU_CNTR_BASE(cci_pmu->model, idx) + offset);
}
-static void pmu_write_register(u32 value, int idx, unsigned int offset)
+static void pmu_write_register(struct cci_pmu *cci_pmu, u32 value,
+ int idx, unsigned int offset)
{
- return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+ return writel_relaxed(value, cci_pmu->base +
+ CCI_PMU_CNTR_BASE(cci_pmu->model, idx) + offset);
}
-static void pmu_disable_counter(int idx)
+static void pmu_disable_counter(struct cci_pmu *cci_pmu, int idx)
{
- pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL);
+ pmu_write_register(cci_pmu, 0, idx, CCI_PMU_CNTR_CTRL);
}
-static void pmu_enable_counter(int idx)
+static void pmu_enable_counter(struct cci_pmu *cci_pmu, int idx)
{
- pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL);
+ pmu_write_register(cci_pmu, 1, idx, CCI_PMU_CNTR_CTRL);
}
-static void pmu_set_event(int idx, unsigned long event)
+static void pmu_set_event(struct cci_pmu *cci_pmu, int idx, unsigned long event)
{
- pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
+ pmu_write_register(cci_pmu, event, idx, CCI_PMU_EVT_SEL);
}
+/*
+ * Returns the number of programmable counters actually implemented
+ * by the cci
+ */
static u32 pmu_get_max_counters(void)
{
- u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
- CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
-
- /* add 1 for cycle counter */
- return n_cnts + 1;
+ return (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
+ CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
}
static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *event)
{
struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
- struct hw_perf_event *hw_event = &event->hw;
- unsigned long cci_event = hw_event->config_base;
+ unsigned long cci_event = event->hw.config_base;
int idx;
- if (cci_event == CCI_PMU_CYCLES) {
- if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask))
- return -EAGAIN;
+ if (cci_pmu->model->get_event_idx)
+ return cci_pmu->model->get_event_idx(cci_pmu, hw, cci_event);
- return CCI_PMU_CYCLE_CNTR_IDX;
- }
-
- for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
+ /* Generic code to find an unused idx from the mask */
+ for(idx = 0; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++)
if (!test_and_set_bit(idx, hw->used_mask))
return idx;
static int pmu_map_event(struct perf_event *event)
{
- int mapping;
- unsigned long config = event->attr.config;
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
- if (event->attr.type < PERF_TYPE_MAX)
+ if (event->attr.type < PERF_TYPE_MAX ||
+ !cci_pmu->model->validate_hw_event)
return -ENOENT;
- if (config == CCI_PMU_CYCLES)
- mapping = config;
- else
- mapping = pmu_validate_hw_event(config);
-
- return mapping;
+ return cci_pmu->model->validate_hw_event(cci_pmu, event->attr.config);
}
static int pmu_request_irq(struct cci_pmu *cci_pmu, irq_handler_t handler)
if (unlikely(!pmu_device))
return -ENODEV;
- if (pmu->nr_irqs < 1) {
+ if (cci_pmu->nr_irqs < 1) {
dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n");
return -ENODEV;
}
*
* This should allow handling of non-unique interrupt for the counters.
*/
- for (i = 0; i < pmu->nr_irqs; i++) {
- int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED,
+ for (i = 0; i < cci_pmu->nr_irqs; i++) {
+ int err = request_irq(cci_pmu->irqs[i], handler, IRQF_SHARED,
"arm-cci-pmu", cci_pmu);
if (err) {
dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n",
- pmu->irqs[i]);
+ cci_pmu->irqs[i]);
return err;
}
- set_bit(i, &pmu->active_irqs);
+ set_bit(i, &cci_pmu->active_irqs);
}
return 0;
{
int i;
- for (i = 0; i < pmu->nr_irqs; i++) {
- if (!test_and_clear_bit(i, &pmu->active_irqs))
+ for (i = 0; i < cci_pmu->nr_irqs; i++) {
+ if (!test_and_clear_bit(i, &cci_pmu->active_irqs))
continue;
- free_irq(pmu->irqs[i], cci_pmu);
+ free_irq(cci_pmu->irqs[i], cci_pmu);
}
}
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return 0;
}
- value = pmu_read_register(idx, CCI_PMU_CNTR);
+ value = pmu_read_register(cci_pmu, idx, CCI_PMU_CNTR);
return value;
}
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
else
- pmu_write_register(value, idx, CCI_PMU_CNTR);
+ pmu_write_register(cci_pmu, value, idx, CCI_PMU_CNTR);
}
static u64 pmu_event_update(struct perf_event *event)
{
unsigned long flags;
struct cci_pmu *cci_pmu = dev;
- struct cci_pmu_hw_events *events = &pmu->hw_events;
+ struct cci_pmu_hw_events *events = &cci_pmu->hw_events;
int idx, handled = IRQ_NONE;
raw_spin_lock_irqsave(&events->pmu_lock, flags);
* This should work regardless of whether we have per-counter overflow
* interrupt or a combined overflow interrupt.
*/
- for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
+ for (idx = 0; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
struct perf_event *event = events->events[idx];
struct hw_perf_event *hw_counter;
hw_counter = &event->hw;
/* Did this counter overflow? */
- if (!(pmu_read_register(idx, CCI_PMU_OVRFLW) &
+ if (!(pmu_read_register(cci_pmu, idx, CCI_PMU_OVRFLW) &
CCI_PMU_OVRFLW_FLAG))
continue;
- pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
+ pmu_write_register(cci_pmu, CCI_PMU_OVRFLW_FLAG, idx,
+ CCI_PMU_OVRFLW);
pmu_event_update(event);
pmu_event_set_period(event);
{
struct cci_pmu *cci_pmu = to_cci_pmu(pmu);
struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
- int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_events);
+ int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_cntrs);
unsigned long flags;
u32 val;
raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
}
+/*
+ * Check if the idx represents a non-programmable counter.
+ * All the fixed event counters are mapped before the programmable
+ * counters.
+ */
+static bool pmu_fixed_hw_idx(struct cci_pmu *cci_pmu, int idx)
+{
+ return (idx >= 0) && (idx < cci_pmu->model->fixed_hw_cntrs);
+}
+
static void cci_pmu_start(struct perf_event *event, int pmu_flags)
{
struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
- /* Configure the event to count, unless you are counting cycles */
- if (idx != CCI_PMU_CYCLE_CNTR_IDX)
- pmu_set_event(idx, hwc->config_base);
+ /* Configure the counter unless you are counting a fixed event */
+ if (!pmu_fixed_hw_idx(cci_pmu, idx))
+ pmu_set_event(cci_pmu, idx, hwc->config_base);
pmu_event_set_period(event);
- pmu_enable_counter(idx);
+ pmu_enable_counter(cci_pmu, idx);
raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
}
* We always reprogram the counter, so ignore PERF_EF_UPDATE. See
* cci_pmu_start()
*/
- pmu_disable_counter(idx);
+ pmu_disable_counter(cci_pmu, idx);
pmu_event_update(event);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ unsigned long mask[BITS_TO_LONGS(cci_pmu->num_cntrs)];
struct cci_pmu_hw_events fake_pmu = {
/*
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
- .used_mask = { 0 },
+ .used_mask = mask,
};
+ memset(mask, 0, BITS_TO_LONGS(cci_pmu->num_cntrs) * sizeof(unsigned long));
if (!validate_event(event->pmu, &fake_pmu, leader))
return -EINVAL;
return err;
}
-static ssize_t pmu_attr_cpumask_show(struct device *dev,
+static ssize_t pmu_cpumask_attr_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
+ struct dev_ext_attribute *eattr = container_of(attr,
+ struct dev_ext_attribute, attr);
+ struct cci_pmu *cci_pmu = eattr->var;
+
int n = scnprintf(buf, PAGE_SIZE - 1, "%*pbl",
- cpumask_pr_args(&pmu->cpus));
+ cpumask_pr_args(&cci_pmu->cpus));
buf[n++] = '\n';
buf[n] = '\0';
return n;
}
-static DEVICE_ATTR(cpumask, S_IRUGO, pmu_attr_cpumask_show, NULL);
+static struct dev_ext_attribute pmu_cpumask_attr = {
+ __ATTR(cpumask, S_IRUGO, pmu_cpumask_attr_show, NULL),
+ NULL, /* Populated in cci_pmu_init */
+};
static struct attribute *pmu_attrs[] = {
- &dev_attr_cpumask.attr,
+ &pmu_cpumask_attr.attr.attr,
NULL,
};
.attrs = pmu_attrs,
};
+static struct attribute_group pmu_format_attr_group = {
+ .name = "format",
+ .attrs = NULL, /* Filled in cci_pmu_init_attrs */
+};
+
+static struct attribute_group pmu_event_attr_group = {
+ .name = "events",
+ .attrs = NULL, /* Filled in cci_pmu_init_attrs */
+};
+
static const struct attribute_group *pmu_attr_groups[] = {
&pmu_attr_group,
+ &pmu_format_attr_group,
+ &pmu_event_attr_group,
NULL
};
+static struct attribute **alloc_attrs(struct platform_device *pdev,
+ int n, struct dev_ext_attribute *source)
+{
+ int i;
+ struct attribute **attrs;
+
+ /* Alloc n + 1 (for terminating NULL) */
+ attrs = devm_kcalloc(&pdev->dev, n + 1, sizeof(struct attribute *),
+ GFP_KERNEL);
+ if (!attrs)
+ return attrs;
+ for(i = 0; i < n; i++)
+ attrs[i] = &source[i].attr.attr;
+ return attrs;
+}
+
+static int cci_pmu_init_attrs(struct cci_pmu *cci_pmu, struct platform_device *pdev)
+{
+ const struct cci_pmu_model *model = cci_pmu->model;
+ struct attribute **attrs;
+
+ /*
+ * All allocations below are managed, hence doesn't need to be
+ * free'd explicitly in case of an error.
+ */
+
+ if (model->nevent_attrs) {
+ attrs = alloc_attrs(pdev, model->nevent_attrs,
+ model->event_attrs);
+ if (!attrs)
+ return -ENOMEM;
+ pmu_event_attr_group.attrs = attrs;
+ }
+ if (model->nformat_attrs) {
+ attrs = alloc_attrs(pdev, model->nformat_attrs,
+ model->format_attrs);
+ if (!attrs)
+ return -ENOMEM;
+ pmu_format_attr_group.attrs = attrs;
+ }
+ pmu_cpumask_attr.var = cci_pmu;
+
+ return 0;
+}
+
static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev)
{
char *name = cci_pmu->model->name;
+ u32 num_cntrs;
+ int rc;
+
+ rc = cci_pmu_init_attrs(cci_pmu, pdev);
+ if (rc)
+ return rc;
+
cci_pmu->pmu = (struct pmu) {
.name = cci_pmu->model->name,
.task_ctx_nr = perf_invalid_context,
};
cci_pmu->plat_device = pdev;
- cci_pmu->num_events = pmu_get_max_counters();
+ num_cntrs = pmu_get_max_counters();
+ if (num_cntrs > cci_pmu->model->num_hw_cntrs) {
+ dev_warn(&pdev->dev,
+ "PMU implements more counters(%d) than supported by"
+ " the model(%d), truncated.",
+ num_cntrs, cci_pmu->model->num_hw_cntrs);
+ num_cntrs = cci_pmu->model->num_hw_cntrs;
+ }
+ cci_pmu->num_cntrs = num_cntrs + cci_pmu->model->fixed_hw_cntrs;
return perf_pmu_register(&cci_pmu->pmu, name, -1);
}
static int cci_pmu_cpu_notifier(struct notifier_block *self,
unsigned long action, void *hcpu)
{
+ struct cci_pmu *cci_pmu = container_of(self,
+ struct cci_pmu, cpu_nb);
unsigned int cpu = (long)hcpu;
unsigned int target;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DOWN_PREPARE:
- if (!cpumask_test_and_clear_cpu(cpu, &pmu->cpus))
+ if (!cpumask_test_and_clear_cpu(cpu, &cci_pmu->cpus))
break;
target = cpumask_any_but(cpu_online_mask, cpu);
if (target < 0) // UP, last CPU
* TODO: migrate context once core races on event->ctx have
* been fixed.
*/
- cpumask_set_cpu(target, &pmu->cpus);
+ cpumask_set_cpu(target, &cci_pmu->cpus);
default:
break;
}
return NOTIFY_OK;
}
-static struct notifier_block cci_pmu_cpu_nb = {
- .notifier_call = cci_pmu_cpu_notifier,
- /*
- * to migrate uncore events, our notifier should be executed
- * before perf core's notifier.
- */
- .priority = CPU_PRI_PERF + 1,
-};
-
static struct cci_pmu_model cci_pmu_models[] = {
- [CCI_REV_R0] = {
+#ifdef CONFIG_ARM_CCI400_PMU
+ [CCI400_R0] = {
.name = "CCI_400",
+ .fixed_hw_cntrs = 1, /* Cycle counter */
+ .num_hw_cntrs = 4,
+ .cntr_size = SZ_4K,
+ .format_attrs = cci400_pmu_format_attrs,
+ .nformat_attrs = ARRAY_SIZE(cci400_pmu_format_attrs),
+ .event_attrs = cci400_r0_pmu_event_attrs,
+ .nevent_attrs = ARRAY_SIZE(cci400_r0_pmu_event_attrs),
.event_ranges = {
[CCI_IF_SLAVE] = {
- CCI_REV_R0_SLAVE_PORT_MIN_EV,
- CCI_REV_R0_SLAVE_PORT_MAX_EV,
+ CCI400_R0_SLAVE_PORT_MIN_EV,
+ CCI400_R0_SLAVE_PORT_MAX_EV,
},
[CCI_IF_MASTER] = {
- CCI_REV_R0_MASTER_PORT_MIN_EV,
- CCI_REV_R0_MASTER_PORT_MAX_EV,
+ CCI400_R0_MASTER_PORT_MIN_EV,
+ CCI400_R0_MASTER_PORT_MAX_EV,
},
},
+ .validate_hw_event = cci400_validate_hw_event,
+ .get_event_idx = cci400_get_event_idx,
},
- [CCI_REV_R1] = {
+ [CCI400_R1] = {
.name = "CCI_400_r1",
+ .fixed_hw_cntrs = 1, /* Cycle counter */
+ .num_hw_cntrs = 4,
+ .cntr_size = SZ_4K,
+ .format_attrs = cci400_pmu_format_attrs,
+ .nformat_attrs = ARRAY_SIZE(cci400_pmu_format_attrs),
+ .event_attrs = cci400_r1_pmu_event_attrs,
+ .nevent_attrs = ARRAY_SIZE(cci400_r1_pmu_event_attrs),
.event_ranges = {
[CCI_IF_SLAVE] = {
- CCI_REV_R1_SLAVE_PORT_MIN_EV,
- CCI_REV_R1_SLAVE_PORT_MAX_EV,
+ CCI400_R1_SLAVE_PORT_MIN_EV,
+ CCI400_R1_SLAVE_PORT_MAX_EV,
},
[CCI_IF_MASTER] = {
- CCI_REV_R1_MASTER_PORT_MIN_EV,
- CCI_REV_R1_MASTER_PORT_MAX_EV,
+ CCI400_R1_MASTER_PORT_MIN_EV,
+ CCI400_R1_MASTER_PORT_MAX_EV,
},
},
+ .validate_hw_event = cci400_validate_hw_event,
+ .get_event_idx = cci400_get_event_idx,
},
+#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ [CCI500_R0] = {
+ .name = "CCI_500",
+ .fixed_hw_cntrs = 0,
+ .num_hw_cntrs = 8,
+ .cntr_size = SZ_64K,
+ .format_attrs = cci500_pmu_format_attrs,
+ .nformat_attrs = ARRAY_SIZE(cci500_pmu_format_attrs),
+ .event_attrs = cci500_pmu_event_attrs,
+ .nevent_attrs = ARRAY_SIZE(cci500_pmu_event_attrs),
+ .event_ranges = {
+ [CCI_IF_SLAVE] = {
+ CCI500_SLAVE_PORT_MIN_EV,
+ CCI500_SLAVE_PORT_MAX_EV,
+ },
+ [CCI_IF_MASTER] = {
+ CCI500_MASTER_PORT_MIN_EV,
+ CCI500_MASTER_PORT_MAX_EV,
+ },
+ [CCI_IF_GLOBAL] = {
+ CCI500_GLOBAL_PORT_MIN_EV,
+ CCI500_GLOBAL_PORT_MAX_EV,
+ },
+ },
+ .validate_hw_event = cci500_validate_hw_event,
+ },
+#endif
};
static const struct of_device_id arm_cci_pmu_matches[] = {
+#ifdef CONFIG_ARM_CCI400_PMU
{
.compatible = "arm,cci-400-pmu",
.data = NULL,
},
{
.compatible = "arm,cci-400-pmu,r0",
- .data = &cci_pmu_models[CCI_REV_R0],
+ .data = &cci_pmu_models[CCI400_R0],
},
{
.compatible = "arm,cci-400-pmu,r1",
- .data = &cci_pmu_models[CCI_REV_R1],
+ .data = &cci_pmu_models[CCI400_R1],
+ },
+#endif
+#ifdef CONFIG_ARM_CCI500_PMU
+ {
+ .compatible = "arm,cci-500-pmu,r0",
+ .data = &cci_pmu_models[CCI500_R0],
},
+#endif
{},
};
return false;
}
-static int cci_pmu_probe(struct platform_device *pdev)
+static struct cci_pmu *cci_pmu_alloc(struct platform_device *pdev)
{
- struct resource *res;
- int i, ret, irq;
+ struct cci_pmu *cci_pmu;
const struct cci_pmu_model *model;
+ /*
+ * All allocations are devm_* hence we don't have to free
+ * them explicitly on an error, as it would end up in driver
+ * detach.
+ */
model = get_cci_model(pdev);
if (!model) {
dev_warn(&pdev->dev, "CCI PMU version not supported\n");
- return -ENODEV;
+ return ERR_PTR(-ENODEV);
}
- pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
- if (!pmu)
- return -ENOMEM;
+ cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*cci_pmu), GFP_KERNEL);
+ if (!cci_pmu)
+ return ERR_PTR(-ENOMEM);
+
+ cci_pmu->model = model;
+ cci_pmu->irqs = devm_kcalloc(&pdev->dev, CCI_PMU_MAX_HW_CNTRS(model),
+ sizeof(*cci_pmu->irqs), GFP_KERNEL);
+ if (!cci_pmu->irqs)
+ return ERR_PTR(-ENOMEM);
+ cci_pmu->hw_events.events = devm_kcalloc(&pdev->dev,
+ CCI_PMU_MAX_HW_CNTRS(model),
+ sizeof(*cci_pmu->hw_events.events),
+ GFP_KERNEL);
+ if (!cci_pmu->hw_events.events)
+ return ERR_PTR(-ENOMEM);
+ cci_pmu->hw_events.used_mask = devm_kcalloc(&pdev->dev,
+ BITS_TO_LONGS(CCI_PMU_MAX_HW_CNTRS(model)),
+ sizeof(*cci_pmu->hw_events.used_mask),
+ GFP_KERNEL);
+ if (!cci_pmu->hw_events.used_mask)
+ return ERR_PTR(-ENOMEM);
+
+ return cci_pmu;
+}
+
+
+static int cci_pmu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct cci_pmu *cci_pmu;
+ int i, ret, irq;
+
+ cci_pmu = cci_pmu_alloc(pdev);
+ if (IS_ERR(cci_pmu))
+ return PTR_ERR(cci_pmu);
- pmu->model = model;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pmu->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pmu->base))
+ cci_pmu->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(cci_pmu->base))
return -ENOMEM;
/*
- * CCI PMU has 5 overflow signals - one per counter; but some may be tied
+ * CCI PMU has one overflow interrupt per counter; but some may be tied
* together to a common interrupt.
*/
- pmu->nr_irqs = 0;
- for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) {
+ cci_pmu->nr_irqs = 0;
+ for (i = 0; i < CCI_PMU_MAX_HW_CNTRS(cci_pmu->model); i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0)
break;
- if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs))
+ if (is_duplicate_irq(irq, cci_pmu->irqs, cci_pmu->nr_irqs))
continue;
- pmu->irqs[pmu->nr_irqs++] = irq;
+ cci_pmu->irqs[cci_pmu->nr_irqs++] = irq;
}
/*
* Ensure that the device tree has as many interrupts as the number
* of counters.
*/
- if (i < CCI_PMU_MAX_HW_EVENTS) {
+ if (i < CCI_PMU_MAX_HW_CNTRS(cci_pmu->model)) {
dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n",
- i, CCI_PMU_MAX_HW_EVENTS);
+ i, CCI_PMU_MAX_HW_CNTRS(cci_pmu->model));
return -EINVAL;
}
- raw_spin_lock_init(&pmu->hw_events.pmu_lock);
- mutex_init(&pmu->reserve_mutex);
- atomic_set(&pmu->active_events, 0);
- cpumask_set_cpu(smp_processor_id(), &pmu->cpus);
+ raw_spin_lock_init(&cci_pmu->hw_events.pmu_lock);
+ mutex_init(&cci_pmu->reserve_mutex);
+ atomic_set(&cci_pmu->active_events, 0);
+ cpumask_set_cpu(smp_processor_id(), &cci_pmu->cpus);
+
+ cci_pmu->cpu_nb = (struct notifier_block) {
+ .notifier_call = cci_pmu_cpu_notifier,
+ /*
+ * to migrate uncore events, our notifier should be executed
+ * before perf core's notifier.
+ */
+ .priority = CPU_PRI_PERF + 1,
+ };
- ret = register_cpu_notifier(&cci_pmu_cpu_nb);
+ ret = register_cpu_notifier(&cci_pmu->cpu_nb);
if (ret)
return ret;
- ret = cci_pmu_init(pmu, pdev);
- if (ret)
+ ret = cci_pmu_init(cci_pmu, pdev);
+ if (ret) {
+ unregister_cpu_notifier(&cci_pmu->cpu_nb);
return ret;
+ }
- pr_info("ARM %s PMU driver probed", pmu->model->name);
+ pr_info("ARM %s PMU driver probed", cci_pmu->model->name);
return 0;
}
return platform_driver_register(&cci_platform_driver);
}
-#else /* !CONFIG_ARM_CCI400_PMU */
+#else /* !CONFIG_ARM_CCI_PMU */
static int __init cci_platform_init(void)
{
return 0;
}
-#endif /* CONFIG_ARM_CCI400_PMU */
+#endif /* CONFIG_ARM_CCI_PMU */
#ifdef CONFIG_ARM_CCI400_PORT_CTRL
struct hrtimer hrtimer;
+ cpumask_t cpu;
+ struct notifier_block cpu_nb;
+
struct pmu pmu;
};
struct arm_ccn {
struct device *dev;
void __iomem *base;
- unsigned irq_used:1;
+ unsigned int irq;
+
unsigned sbas_present:1;
unsigned sbsx_present:1;
static void arm_ccn_pmu_config_set(u64 *config, u32 node_xp, u32 type, u32 port)
{
- *config &= ~((0xff << 0) | (0xff << 8) | (0xff << 24));
+ *config &= ~((0xff << 0) | (0xff << 8) | (0x3 << 24));
*config |= (node_xp << 0) | (type << 8) | (port << 24);
}
if (event->mask)
res += snprintf(buf + res, PAGE_SIZE - res, ",mask=0x%x",
event->mask);
+
+ /* Arguments required by an event */
+ switch (event->type) {
+ case CCN_TYPE_CYCLES:
+ break;
+ case CCN_TYPE_XP:
+ res += snprintf(buf + res, PAGE_SIZE - res,
+ ",xp=?,port=?,vc=?,dir=?");
+ if (event->event == CCN_EVENT_WATCHPOINT)
+ res += snprintf(buf + res, PAGE_SIZE - res,
+ ",cmp_l=?,cmp_h=?,mask=?");
+ break;
+ default:
+ res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
+ break;
+ }
+
res += snprintf(buf + res, PAGE_SIZE - res, "\n");
return res;
.attrs = arm_ccn_pmu_cmp_mask_attrs,
};
+static ssize_t arm_ccn_pmu_cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
+
+ return cpumap_print_to_pagebuf(true, buf, &ccn->dt.cpu);
+}
+
+static struct device_attribute arm_ccn_pmu_cpumask_attr =
+ __ATTR(cpumask, S_IRUGO, arm_ccn_pmu_cpumask_show, NULL);
+
+static struct attribute *arm_ccn_pmu_cpumask_attrs[] = {
+ &arm_ccn_pmu_cpumask_attr.attr,
+ NULL,
+};
+
+static struct attribute_group arm_ccn_pmu_cpumask_attr_group = {
+ .attrs = arm_ccn_pmu_cpumask_attrs,
+};
/*
* Default poll period is 10ms, which is way over the top anyway,
&arm_ccn_pmu_events_attr_group,
&arm_ccn_pmu_format_attr_group,
&arm_ccn_pmu_cmp_mask_attr_group,
+ &arm_ccn_pmu_cpumask_attr_group,
NULL
};
return 0;
}
-static void arm_ccn_pmu_event_destroy(struct perf_event *event)
+static int arm_ccn_pmu_event_alloc(struct perf_event *event)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
+ struct hw_perf_event *hw = &event->hw;
+ u32 node_xp, type, event_id;
+ struct arm_ccn_component *source;
+ int bit;
+
+ node_xp = CCN_CONFIG_NODE(event->attr.config);
+ type = CCN_CONFIG_TYPE(event->attr.config);
+ event_id = CCN_CONFIG_EVENT(event->attr.config);
+
+ /* Allocate the cycle counter */
+ if (type == CCN_TYPE_CYCLES) {
+ if (test_and_set_bit(CCN_IDX_PMU_CYCLE_COUNTER,
+ ccn->dt.pmu_counters_mask))
+ return -EAGAIN;
+
+ hw->idx = CCN_IDX_PMU_CYCLE_COUNTER;
+ ccn->dt.pmu_counters[CCN_IDX_PMU_CYCLE_COUNTER].event = event;
+
+ return 0;
+ }
+
+ /* Allocate an event counter */
+ hw->idx = arm_ccn_pmu_alloc_bit(ccn->dt.pmu_counters_mask,
+ CCN_NUM_PMU_EVENT_COUNTERS);
+ if (hw->idx < 0) {
+ dev_dbg(ccn->dev, "No more counters available!\n");
+ return -EAGAIN;
+ }
+
+ if (type == CCN_TYPE_XP)
+ source = &ccn->xp[node_xp];
+ else
+ source = &ccn->node[node_xp];
+ ccn->dt.pmu_counters[hw->idx].source = source;
+
+ /* Allocate an event source or a watchpoint */
+ if (type == CCN_TYPE_XP && event_id == CCN_EVENT_WATCHPOINT)
+ bit = arm_ccn_pmu_alloc_bit(source->xp.dt_cmp_mask,
+ CCN_NUM_XP_WATCHPOINTS);
+ else
+ bit = arm_ccn_pmu_alloc_bit(source->pmu_events_mask,
+ CCN_NUM_PMU_EVENTS);
+ if (bit < 0) {
+ dev_dbg(ccn->dev, "No more event sources/watchpoints on node/XP %d!\n",
+ node_xp);
+ clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
+ return -EAGAIN;
+ }
+ hw->config_base = bit;
+
+ ccn->dt.pmu_counters[hw->idx].event = event;
+
+ return 0;
+}
+
+static void arm_ccn_pmu_event_release(struct perf_event *event)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
struct hw_perf_event *hw = &event->hw;
struct arm_ccn *ccn;
struct hw_perf_event *hw = &event->hw;
u32 node_xp, type, event_id;
- int valid, bit;
- struct arm_ccn_component *source;
+ int valid;
int i;
+ struct perf_event *sibling;
if (event->attr.type != event->pmu->type)
return -ENOENT;
ccn = pmu_to_arm_ccn(event->pmu);
- event->destroy = arm_ccn_pmu_event_destroy;
if (hw->sample_period) {
dev_warn(ccn->dev, "Sampling not supported!\n");
dev_warn(ccn->dev, "Can't provide per-task data!\n");
return -EOPNOTSUPP;
}
+ /*
+ * Many perf core operations (eg. events rotation) operate on a
+ * single CPU context. This is obvious for CPU PMUs, where one
+ * expects the same sets of events being observed on all CPUs,
+ * but can lead to issues for off-core PMUs, like CCN, where each
+ * event could be theoretically assigned to a different CPU. To
+ * mitigate this, we enforce CPU assignment to one, selected
+ * processor (the one described in the "cpumask" attribute).
+ */
+ event->cpu = cpumask_first(&ccn->dt.cpu);
node_xp = CCN_CONFIG_NODE(event->attr.config);
type = CCN_CONFIG_TYPE(event->attr.config);
node_xp, type, port);
}
- /* Allocate the cycle counter */
- if (type == CCN_TYPE_CYCLES) {
- if (test_and_set_bit(CCN_IDX_PMU_CYCLE_COUNTER,
- ccn->dt.pmu_counters_mask))
- return -EAGAIN;
-
- hw->idx = CCN_IDX_PMU_CYCLE_COUNTER;
- ccn->dt.pmu_counters[CCN_IDX_PMU_CYCLE_COUNTER].event = event;
-
- return 0;
- }
-
- /* Allocate an event counter */
- hw->idx = arm_ccn_pmu_alloc_bit(ccn->dt.pmu_counters_mask,
- CCN_NUM_PMU_EVENT_COUNTERS);
- if (hw->idx < 0) {
- dev_warn(ccn->dev, "No more counters available!\n");
- return -EAGAIN;
- }
-
- if (type == CCN_TYPE_XP)
- source = &ccn->xp[node_xp];
- else
- source = &ccn->node[node_xp];
- ccn->dt.pmu_counters[hw->idx].source = source;
-
- /* Allocate an event source or a watchpoint */
- if (type == CCN_TYPE_XP && event_id == CCN_EVENT_WATCHPOINT)
- bit = arm_ccn_pmu_alloc_bit(source->xp.dt_cmp_mask,
- CCN_NUM_XP_WATCHPOINTS);
- else
- bit = arm_ccn_pmu_alloc_bit(source->pmu_events_mask,
- CCN_NUM_PMU_EVENTS);
- if (bit < 0) {
- dev_warn(ccn->dev, "No more event sources/watchpoints on node/XP %d!\n",
- node_xp);
- clear_bit(hw->idx, ccn->dt.pmu_counters_mask);
- return -EAGAIN;
- }
- hw->config_base = bit;
+ /*
+ * We must NOT create groups containing mixed PMUs, although software
+ * events are acceptable (for example to create a CCN group
+ * periodically read when a hrtimer aka cpu-clock leader triggers).
+ */
+ if (event->group_leader->pmu != event->pmu &&
+ !is_software_event(event->group_leader))
+ return -EINVAL;
- ccn->dt.pmu_counters[hw->idx].event = event;
+ list_for_each_entry(sibling, &event->group_leader->sibling_list,
+ group_entry)
+ if (sibling->pmu != event->pmu &&
+ !is_software_event(sibling))
+ return -EINVAL;
return 0;
}
arm_ccn_pmu_read_counter(ccn, hw->idx));
hw->state = 0;
- if (!ccn->irq_used)
+ /*
+ * Pin the timer, so that the overflows are handled by the chosen
+ * event->cpu (this is the same one as presented in "cpumask"
+ * attribute).
+ */
+ if (!ccn->irq)
hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
- HRTIMER_MODE_REL);
+ HRTIMER_MODE_REL_PINNED);
/* Set the DT bus input, engaging the counter */
arm_ccn_pmu_xp_dt_config(event, 1);
/* Disable counting, setting the DT bus to pass-through mode */
arm_ccn_pmu_xp_dt_config(event, 0);
- if (!ccn->irq_used)
+ if (!ccn->irq)
hrtimer_cancel(&ccn->dt.hrtimer);
/* Let the DT bus drain */
static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
{
+ int err;
struct hw_perf_event *hw = &event->hw;
+ err = arm_ccn_pmu_event_alloc(event);
+ if (err)
+ return err;
+
arm_ccn_pmu_event_config(event);
hw->state = PERF_HES_STOPPED;
static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
{
arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
+
+ arm_ccn_pmu_event_release(event);
}
static void arm_ccn_pmu_event_read(struct perf_event *event)
}
+static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
+ unsigned long action, void *hcpu)
+{
+ struct arm_ccn_dt *dt = container_of(nb, struct arm_ccn_dt, cpu_nb);
+ struct arm_ccn *ccn = container_of(dt, struct arm_ccn, dt);
+ unsigned int cpu = (long)hcpu; /* for (long) see kernel/cpu.c */
+ unsigned int target;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_DOWN_PREPARE:
+ if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
+ break;
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target < 0)
+ break;
+ perf_pmu_migrate_context(&dt->pmu, cpu, target);
+ cpumask_set_cpu(target, &dt->cpu);
+ WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+
static DEFINE_IDA(arm_ccn_pmu_ida);
static int arm_ccn_pmu_init(struct arm_ccn *ccn)
{
int i;
char *name;
+ int err;
/* Initialize DT subsystem */
ccn->dt.base = ccn->base + CCN_REGION_SIZE;
};
/* No overflow interrupt? Have to use a timer instead. */
- if (!ccn->irq_used) {
+ if (!ccn->irq) {
dev_info(ccn->dev, "No access to interrupts, using timer.\n");
hrtimer_init(&ccn->dt.hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
ccn->dt.hrtimer.function = arm_ccn_pmu_timer_handler;
}
- return perf_pmu_register(&ccn->dt.pmu, name, -1);
+ /* Pick one CPU which we will use to collect data from CCN... */
+ cpumask_set_cpu(smp_processor_id(), &ccn->dt.cpu);
+
+ /*
+ * ... and change the selection when it goes offline. Priority is
+ * picked to have a chance to migrate events before perf is notified.
+ */
+ ccn->dt.cpu_nb.notifier_call = arm_ccn_pmu_cpu_notifier;
+ ccn->dt.cpu_nb.priority = CPU_PRI_PERF + 1,
+ err = register_cpu_notifier(&ccn->dt.cpu_nb);
+ if (err)
+ goto error_cpu_notifier;
+
+ /* Also make sure that the overflow interrupt is handled by this CPU */
+ if (ccn->irq) {
+ err = irq_set_affinity(ccn->irq, &ccn->dt.cpu);
+ if (err) {
+ dev_err(ccn->dev, "Failed to set interrupt affinity!\n");
+ goto error_set_affinity;
+ }
+ }
+
+ err = perf_pmu_register(&ccn->dt.pmu, name, -1);
+ if (err)
+ goto error_pmu_register;
+
+ return 0;
+
+error_pmu_register:
+error_set_affinity:
+ unregister_cpu_notifier(&ccn->dt.cpu_nb);
+error_cpu_notifier:
+ ida_simple_remove(&arm_ccn_pmu_ida, ccn->dt.id);
+ for (i = 0; i < ccn->num_xps; i++)
+ writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
+ writel(0, ccn->dt.base + CCN_DT_PMCR);
+ return err;
}
static void arm_ccn_pmu_cleanup(struct arm_ccn *ccn)
{
int i;
+ irq_set_affinity(ccn->irq, cpu_possible_mask);
+ unregister_cpu_notifier(&ccn->dt.cpu_nb);
for (i = 0; i < ccn->num_xps; i++)
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
writel(0, ccn->dt.base + CCN_DT_PMCR);
{
struct arm_ccn *ccn;
struct resource *res;
+ unsigned int irq;
int err;
ccn = devm_kzalloc(&pdev->dev, sizeof(*ccn), GFP_KERNEL);
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res)
return -EINVAL;
+ irq = res->start;
/* Check if we can use the interrupt */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__DISABLE,
/* Can set 'disable' bits, so can acknowledge interrupts */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
ccn->base + CCN_MN_ERRINT_STATUS);
- err = devm_request_irq(ccn->dev, res->start,
- arm_ccn_irq_handler, 0, dev_name(ccn->dev),
- ccn);
+ err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
+ dev_name(ccn->dev), ccn);
if (err)
return err;
- ccn->irq_used = 1;
+ ccn->irq = irq;
}
struct brcmstb_gisb_arb_device {
void __iomem *base;
const int *gisb_offsets;
+ bool big_endian;
struct mutex lock;
struct list_head next;
u32 valid_mask;
if (offset == -1)
return 1;
- return ioread32(gdev->base + offset);
+ if (gdev->big_endian)
+ return ioread32be(gdev->base + offset);
+ else
+ return ioread32(gdev->base + offset);
}
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
if (offset == -1)
return;
- iowrite32(val, gdev->base + reg);
+
+ if (gdev->big_endian)
+ iowrite32be(val, gdev->base + reg);
+ else
+ iowrite32(val, gdev->base + reg);
}
static ssize_t gisb_arb_get_timeout(struct device *dev,
return -EINVAL;
}
gdev->gisb_offsets = of_id->data;
+ gdev->big_endian = of_device_is_big_endian(dn);
err = devm_request_irq(&pdev->dev, timeout_irq,
brcmstb_gisb_timeout_handler, 0, pdev->name,
#include <linux/of_address.h>
#include <linux/debugfs.h>
#include <linux/log2.h>
-#include <linux/syscore_ops.h>
#include <linux/memblock.h>
+#include <linux/syscore_ops.h>
/*
* DDR target is the same on all platforms.
*/
#define WIN_CTRL_OFF 0x0000
#define WIN_CTRL_ENABLE BIT(0)
+/* Only on HW I/O coherency capable platforms */
#define WIN_CTRL_SYNCBARRIER BIT(1)
#define WIN_CTRL_TGT_MASK 0xf0
#define WIN_CTRL_TGT_SHIFT 4
/* Relative to mbusbridge_base */
#define MBUS_BRIDGE_CTRL_OFF 0x0
-#define MBUS_BRIDGE_SIZE_MASK 0xffff0000
#define MBUS_BRIDGE_BASE_OFF 0x4
-#define MBUS_BRIDGE_BASE_MASK 0xffff0000
/* Maximum number of windows, for all known platforms */
#define MBUS_WINS_MAX 20
static struct mvebu_mbus_state mbus_state;
+/*
+ * We provide two variants of the mv_mbus_dram_info() function:
+ *
+ * - The normal one, where the described DRAM ranges may overlap with
+ * the I/O windows, but for which the DRAM ranges are guaranteed to
+ * have a power of two size. Such ranges are suitable for the DMA
+ * masters that only DMA between the RAM and the device, which is
+ * actually all devices except the crypto engines.
+ *
+ * - The 'nooverlap' one, where the described DRAM ranges are
+ * guaranteed to not overlap with the I/O windows, but for which the
+ * DRAM ranges will not have power of two sizes. They will only be
+ * aligned on a 64 KB boundary, and have a size multiple of 64
+ * KB. Such ranges are suitable for the DMA masters that DMA between
+ * the crypto SRAM (which is mapped through an I/O window) and a
+ * device. This is the case for the crypto engines.
+ */
+
static struct mbus_dram_target_info mvebu_mbus_dram_info;
+static struct mbus_dram_target_info mvebu_mbus_dram_info_nooverlap;
+
const struct mbus_dram_target_info *mv_mbus_dram_info(void)
{
return &mvebu_mbus_dram_info;
}
EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
+const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void)
+{
+ return &mvebu_mbus_dram_info_nooverlap;
+}
+EXPORT_SYMBOL_GPL(mv_mbus_dram_info_nooverlap);
+
/* Checks whether the given window has remap capability */
static bool mvebu_mbus_window_is_remappable(struct mvebu_mbus_state *mbus,
const int win)
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
(attr << WIN_CTRL_ATTR_SHIFT) |
(target << WIN_CTRL_TGT_SHIFT) |
- WIN_CTRL_SYNCBARRIER |
WIN_CTRL_ENABLE;
+ if (mbus->hw_io_coherency)
+ ctrl |= WIN_CTRL_SYNCBARRIER;
writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
* This part of the memory is above 4 GB, so we don't
* care for the MBus bridge hole.
*/
- if (r->base >= 0x100000000)
+ if (r->base >= 0x100000000ULL)
continue;
/*
}
*start = s;
- *end = 0x100000000;
+ *end = 0x100000000ULL;
}
+/*
+ * This function fills in the mvebu_mbus_dram_info_nooverlap data
+ * structure, by looking at the mvebu_mbus_dram_info data, and
+ * removing the parts of it that overlap with I/O windows.
+ */
static void __init
-mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+mvebu_mbus_setup_cpu_target_nooverlap(struct mvebu_mbus_state *mbus)
{
- int i;
- int cs;
uint64_t mbus_bridge_base, mbus_bridge_end;
-
- mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+ int cs_nooverlap = 0;
+ int i;
mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
- for (i = 0, cs = 0; i < 4; i++) {
- u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
- u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
- u64 end;
+ for (i = 0; i < mvebu_mbus_dram_info.num_cs; i++) {
struct mbus_dram_window *w;
+ u64 base, size, end;
- /* Ignore entries that are not enabled */
- if (!(size & DDR_SIZE_ENABLED))
- continue;
-
- /*
- * Ignore entries whose base address is above 2^32,
- * since devices cannot DMA to such high addresses
- */
- if (base & DDR_BASE_CS_HIGH_MASK)
- continue;
-
- base = base & DDR_BASE_CS_LOW_MASK;
- size = (size | ~DDR_SIZE_MASK) + 1;
+ w = &mvebu_mbus_dram_info.cs[i];
+ base = w->base;
+ size = w->size;
end = base + size;
- /*
- * Adjust base/size of the current CS to make sure it
- * doesn't overlap with the MBus bridge hole. This is
- * particularly important for devices that do DMA from
- * DRAM to a SRAM mapped in a MBus window, such as the
- * CESA cryptographic engine.
- */
-
/*
* The CS is fully enclosed inside the MBus bridge
* area, so ignore it.
if (base < mbus_bridge_base && end > mbus_bridge_base)
size -= end - mbus_bridge_base;
- w = &mvebu_mbus_dram_info.cs[cs++];
+ w = &mvebu_mbus_dram_info_nooverlap.cs[cs_nooverlap++];
w->cs_index = i;
w->mbus_attr = 0xf & ~(1 << i);
if (mbus->hw_io_coherency)
w->base = base;
w->size = size;
}
+
+ mvebu_mbus_dram_info_nooverlap.mbus_dram_target_id = TARGET_DDR;
+ mvebu_mbus_dram_info_nooverlap.num_cs = cs_nooverlap;
+}
+
+static void __init
+mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+ int i;
+ int cs;
+
+ mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+
+ /*
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
+ */
+ if ((size & DDR_SIZE_ENABLED) &&
+ !(base & DDR_BASE_CS_HIGH_MASK)) {
+ struct mbus_dram_window *w;
+
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ if (mbus->hw_io_coherency)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+ w->base = base & DDR_BASE_CS_LOW_MASK;
+ w->size = (size | ~DDR_SIZE_MASK) + 1;
+ }
+ }
mvebu_mbus_dram_info.num_cs = cs;
}
mvebu_mbus_disable_window(mbus, win);
mbus->soc->setup_cpu_target(mbus);
+ mvebu_mbus_setup_cpu_target_nooverlap(mbus);
if (is_coherent)
writel(UNIT_SYNC_BARRIER_ALL,
obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIP04) += hisilicon/
obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
+obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
obj-$(CONFIG_X86) += x86/
+obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
#define PERIPHERAL_RSHIFT_MASK 0x3
#define PERIPHERAL_RSHIFT(val) (((val) >> 16) & PERIPHERAL_RSHIFT_MASK)
-#define PERIPHERAL_MAX_SHIFT 4
+#define PERIPHERAL_MAX_SHIFT 3
struct clk_peripheral {
struct clk_hw hw;
return *parent_rate;
if (periph->range.max) {
- for (; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+ for (; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
cur_rate = *parent_rate >> shift;
if (cur_rate <= periph->range.max)
break;
best_diff = cur_rate - rate;
best_rate = cur_rate;
- for (; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+ for (; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
cur_rate = *parent_rate >> shift;
if (cur_rate < rate)
cur_diff = rate - cur_rate;
if (periph->range.max && rate > periph->range.max)
return -EINVAL;
- for (shift = 0; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+ for (shift = 0; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
if (parent_rate >> shift == rate) {
periph->auto_div = false;
periph->div = shift;
int i = 0;
/* Check if parent_rate is a valid input rate */
- if (parent_rate < characteristics->input.min ||
- parent_rate > characteristics->input.max)
+ if (parent_rate < characteristics->input.min)
return -ERANGE;
/*
if (!mindiv)
mindiv = 1;
+ if (parent_rate > characteristics->input.max) {
+ tmpdiv = DIV_ROUND_UP(parent_rate, characteristics->input.max);
+ if (tmpdiv > PLL_DIV_MAX)
+ return -ERANGE;
+
+ if (tmpdiv > mindiv)
+ mindiv = tmpdiv;
+ }
+
/*
* Calculate the maximum divider which is limited by PLL register
* layout (limited by the MUL or DIV field size).
struct at91_pmc *pmc);
#endif
-#if defined(CONFIG_HAVE_AT91_SMD)
+#if defined(CONFIG_HAVE_AT91_H32MX)
extern void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
struct at91_pmc *pmc);
#endif
static void __init berlin2_clock_setup(struct device_node *np)
{
+ struct device_node *parent_np = of_get_parent(np);
const char *parent_names[9];
struct clk *clk;
u8 avpll_flags = 0;
int n;
- gbase = of_iomap(np, 0);
+ gbase = of_iomap(parent_np, 0);
if (!gbase)
return;
bg2_fail:
iounmap(gbase);
}
-CLK_OF_DECLARE(berlin2_clock, "marvell,berlin2-chip-ctrl",
- berlin2_clock_setup);
-CLK_OF_DECLARE(berlin2cd_clock, "marvell,berlin2cd-chip-ctrl",
+CLK_OF_DECLARE(berlin2_clk, "marvell,berlin2-clk",
berlin2_clock_setup);
static void __init berlin2q_clock_setup(struct device_node *np)
{
+ struct device_node *parent_np = of_get_parent(np);
const char *parent_names[9];
struct clk *clk;
int n;
- gbase = of_iomap(np, 0);
+ gbase = of_iomap(parent_np, 0);
if (!gbase) {
pr_err("%s: Unable to map global base\n", np->full_name);
return;
}
/* BG2Q CPU PLL is not part of global registers */
- cpupll_base = of_iomap(np, 1);
+ cpupll_base = of_iomap(parent_np, 1);
if (!cpupll_base) {
pr_err("%s: Unable to map cpupll base\n", np->full_name);
iounmap(gbase);
iounmap(cpupll_base);
iounmap(gbase);
}
-CLK_OF_DECLARE(berlin2q_clock, "marvell,berlin2q-chip-ctrl",
+CLK_OF_DECLARE(berlin2q_clk, "marvell,berlin2q-clk",
berlin2q_clock_setup);
--- /dev/null
+
+obj-y += \
+ clk.o \
+ clk-busy.o \
+ clk-cpu.o \
+ clk-fixup-div.o \
+ clk-fixup-mux.o \
+ clk-gate-exclusive.o \
+ clk-gate2.o \
+ clk-pllv1.o \
+ clk-pllv2.o \
+ clk-pllv3.o \
+ clk-pfd.o
+
+obj-$(CONFIG_SOC_IMX1) += clk-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clk-imx21.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o
+obj-$(CONFIG_SOC_IMX27) += clk-imx27.o
+obj-$(CONFIG_SOC_IMX31) += clk-imx31.o
+obj-$(CONFIG_SOC_IMX35) += clk-imx35.o
+obj-$(CONFIG_SOC_IMX5) += clk-imx51-imx53.o
+obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o
+obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o
+obj-$(CONFIG_SOC_IMX7D) += clk-imx7d.o
+obj-$(CONFIG_SOC_VF610) += clk-vf610.o
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+static int clk_busy_wait(void __iomem *reg, u8 shift)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+ while (readl_relaxed(reg) & (1 << shift))
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+struct clk_busy_divider {
+ struct clk_divider div;
+ const struct clk_ops *div_ops;
+ void __iomem *reg;
+ u8 shift;
+};
+
+static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
+{
+ struct clk_divider *div = container_of(hw, struct clk_divider, hw);
+
+ return container_of(div, struct clk_busy_divider, div);
+}
+
+static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
+}
+
+static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
+}
+
+static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+ int ret;
+
+ ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+static struct clk_ops clk_busy_divider_ops = {
+ .recalc_rate = clk_busy_divider_recalc_rate,
+ .round_rate = clk_busy_divider_round_rate,
+ .set_rate = clk_busy_divider_set_rate,
+};
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift)
+{
+ struct clk_busy_divider *busy;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return ERR_PTR(-ENOMEM);
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->div.reg = reg;
+ busy->div.shift = shift;
+ busy->div.width = width;
+ busy->div.lock = &imx_ccm_lock;
+ busy->div_ops = &clk_divider_ops;
+
+ init.name = name;
+ init.ops = &clk_busy_divider_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ busy->div.hw.init = &init;
+
+ clk = clk_register(NULL, &busy->div.hw);
+ if (IS_ERR(clk))
+ kfree(busy);
+
+ return clk;
+}
+
+struct clk_busy_mux {
+ struct clk_mux mux;
+ const struct clk_ops *mux_ops;
+ void __iomem *reg;
+ u8 shift;
+};
+
+static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
+{
+ struct clk_mux *mux = container_of(hw, struct clk_mux, hw);
+
+ return container_of(mux, struct clk_busy_mux, mux);
+}
+
+static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+
+ return busy->mux_ops->get_parent(&busy->mux.hw);
+}
+
+static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+ int ret;
+
+ ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+static struct clk_ops clk_busy_mux_ops = {
+ .get_parent = clk_busy_mux_get_parent,
+ .set_parent = clk_busy_mux_set_parent,
+};
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ const char **parent_names, int num_parents)
+{
+ struct clk_busy_mux *busy;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return ERR_PTR(-ENOMEM);
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->mux.reg = reg;
+ busy->mux.shift = shift;
+ busy->mux.mask = BIT(width) - 1;
+ busy->mux.lock = &imx_ccm_lock;
+ busy->mux_ops = &clk_mux_ops;
+
+ init.name = name;
+ init.ops = &clk_busy_mux_ops;
+ init.flags = 0;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ busy->mux.hw.init = &init;
+
+ clk = clk_register(NULL, &busy->mux.hw);
+ if (IS_ERR(clk))
+ kfree(busy);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright (c) 2014 Lucas Stach <l.stach@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+struct clk_cpu {
+ struct clk_hw hw;
+ struct clk *div;
+ struct clk *mux;
+ struct clk *pll;
+ struct clk *step;
+};
+
+static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw)
+{
+ return container_of(hw, struct clk_cpu, hw);
+}
+
+static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_cpu *cpu = to_clk_cpu(hw);
+
+ return clk_get_rate(cpu->div);
+}
+
+static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_cpu *cpu = to_clk_cpu(hw);
+
+ return clk_round_rate(cpu->pll, rate);
+}
+
+static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_cpu *cpu = to_clk_cpu(hw);
+ int ret;
+
+ /* switch to PLL bypass clock */
+ ret = clk_set_parent(cpu->mux, cpu->step);
+ if (ret)
+ return ret;
+
+ /* reprogram PLL */
+ ret = clk_set_rate(cpu->pll, rate);
+ if (ret) {
+ clk_set_parent(cpu->mux, cpu->pll);
+ return ret;
+ }
+ /* switch back to PLL clock */
+ clk_set_parent(cpu->mux, cpu->pll);
+
+ /* Ensure the divider is what we expect */
+ clk_set_rate(cpu->div, rate);
+
+ return 0;
+}
+
+static const struct clk_ops clk_cpu_ops = {
+ .recalc_rate = clk_cpu_recalc_rate,
+ .round_rate = clk_cpu_round_rate,
+ .set_rate = clk_cpu_set_rate,
+};
+
+struct clk *imx_clk_cpu(const char *name, const char *parent_name,
+ struct clk *div, struct clk *mux, struct clk *pll,
+ struct clk *step)
+{
+ struct clk_cpu *cpu;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ cpu = kzalloc(sizeof(*cpu), GFP_KERNEL);
+ if (!cpu)
+ return ERR_PTR(-ENOMEM);
+
+ cpu->div = div;
+ cpu->mux = mux;
+ cpu->pll = pll;
+ cpu->step = step;
+
+ init.name = name;
+ init.ops = &clk_cpu_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ cpu->hw.init = &init;
+
+ clk = clk_register(NULL, &cpu->hw);
+ if (IS_ERR(clk))
+ kfree(cpu);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw)
+#define div_mask(d) ((1 << (d->width)) - 1)
+
+/**
+ * struct clk_fixup_div - imx integer fixup divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup divider clock is a subclass of basic clk_divider
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_div {
+ struct clk_divider divider;
+ const struct clk_ops *ops;
+ void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw)
+{
+ struct clk_divider *divider = to_clk_div(hw);
+
+ return container_of(divider, struct clk_fixup_div, divider);
+}
+
+static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+ return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate);
+}
+
+static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+ return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate);
+}
+
+static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+ struct clk_divider *div = to_clk_div(hw);
+ unsigned int divider, value;
+ unsigned long flags = 0;
+ u32 val;
+
+ divider = parent_rate / rate;
+
+ /* Zero based divider */
+ value = divider - 1;
+
+ if (value > div_mask(div))
+ value = div_mask(div);
+
+ spin_lock_irqsave(div->lock, flags);
+
+ val = readl(div->reg);
+ val &= ~(div_mask(div) << div->shift);
+ val |= value << div->shift;
+ fixup_div->fixup(&val);
+ writel(val, div->reg);
+
+ spin_unlock_irqrestore(div->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_fixup_div_ops = {
+ .recalc_rate = clk_fixup_div_recalc_rate,
+ .round_rate = clk_fixup_div_round_rate,
+ .set_rate = clk_fixup_div_set_rate,
+};
+
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width,
+ void (*fixup)(u32 *val))
+{
+ struct clk_fixup_div *fixup_div;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ if (!fixup)
+ return ERR_PTR(-EINVAL);
+
+ fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL);
+ if (!fixup_div)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_fixup_div_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent ? &parent : NULL;
+ init.num_parents = parent ? 1 : 0;
+
+ fixup_div->divider.reg = reg;
+ fixup_div->divider.shift = shift;
+ fixup_div->divider.width = width;
+ fixup_div->divider.lock = &imx_ccm_lock;
+ fixup_div->divider.hw.init = &init;
+ fixup_div->ops = &clk_divider_ops;
+ fixup_div->fixup = fixup;
+
+ clk = clk_register(NULL, &fixup_div->divider.hw);
+ if (IS_ERR(clk))
+ kfree(fixup_div);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
+
+/**
+ * struct clk_fixup_mux - imx integer fixup multiplexer clock
+ * @mux: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup multiplexer clock is a subclass of basic clk_mux
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_mux {
+ struct clk_mux mux;
+ const struct clk_ops *ops;
+ void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+
+ return container_of(mux, struct clk_fixup_mux, mux);
+}
+
+static u8 clk_fixup_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+
+ return fixup_mux->ops->get_parent(&fixup_mux->mux.hw);
+}
+
+static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+ struct clk_mux *mux = to_clk_mux(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ spin_lock_irqsave(mux->lock, flags);
+
+ val = readl(mux->reg);
+ val &= ~(mux->mask << mux->shift);
+ val |= index << mux->shift;
+ fixup_mux->fixup(&val);
+ writel(val, mux->reg);
+
+ spin_unlock_irqrestore(mux->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_fixup_mux_ops = {
+ .get_parent = clk_fixup_mux_get_parent,
+ .set_parent = clk_fixup_mux_set_parent,
+};
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parents,
+ int num_parents, void (*fixup)(u32 *val))
+{
+ struct clk_fixup_mux *fixup_mux;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ if (!fixup)
+ return ERR_PTR(-EINVAL);
+
+ fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL);
+ if (!fixup_mux)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_fixup_mux_ops;
+ init.parent_names = parents;
+ init.num_parents = num_parents;
+ init.flags = 0;
+
+ fixup_mux->mux.reg = reg;
+ fixup_mux->mux.shift = shift;
+ fixup_mux->mux.mask = BIT(width) - 1;
+ fixup_mux->mux.lock = &imx_ccm_lock;
+ fixup_mux->mux.hw.init = &init;
+ fixup_mux->ops = &clk_mux_ops;
+ fixup_mux->fixup = fixup;
+
+ clk = clk_register(NULL, &fixup_mux->mux.hw);
+ if (IS_ERR(clk))
+ kfree(fixup_mux);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+/**
+ * struct clk_gate_exclusive - i.MX specific gate clock which is mutually
+ * exclusive with other gate clocks
+ *
+ * @gate: the parent class
+ * @exclusive_mask: mask of gate bits which are mutually exclusive to this
+ * gate clock
+ *
+ * The imx exclusive gate clock is a subclass of basic clk_gate
+ * with an addtional mask to indicate which other gate bits in the same
+ * register is mutually exclusive to this gate clock.
+ */
+struct clk_gate_exclusive {
+ struct clk_gate gate;
+ u32 exclusive_mask;
+};
+
+static int clk_gate_exclusive_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = container_of(hw, struct clk_gate, hw);
+ struct clk_gate_exclusive *exgate = container_of(gate,
+ struct clk_gate_exclusive, gate);
+ u32 val = readl(gate->reg);
+
+ if (val & exgate->exclusive_mask)
+ return -EBUSY;
+
+ return clk_gate_ops.enable(hw);
+}
+
+static void clk_gate_exclusive_disable(struct clk_hw *hw)
+{
+ clk_gate_ops.disable(hw);
+}
+
+static int clk_gate_exclusive_is_enabled(struct clk_hw *hw)
+{
+ return clk_gate_ops.is_enabled(hw);
+}
+
+static const struct clk_ops clk_gate_exclusive_ops = {
+ .enable = clk_gate_exclusive_enable,
+ .disable = clk_gate_exclusive_disable,
+ .is_enabled = clk_gate_exclusive_is_enabled,
+};
+
+struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u32 exclusive_mask)
+{
+ struct clk_gate_exclusive *exgate;
+ struct clk_gate *gate;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ if (exclusive_mask == 0)
+ return ERR_PTR(-EINVAL);
+
+ exgate = kzalloc(sizeof(*exgate), GFP_KERNEL);
+ if (!exgate)
+ return ERR_PTR(-ENOMEM);
+ gate = &exgate->gate;
+
+ init.name = name;
+ init.ops = &clk_gate_exclusive_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = parent ? &parent : NULL;
+ init.num_parents = parent ? 1 : 0;
+
+ gate->reg = reg;
+ gate->bit_idx = shift;
+ gate->lock = &imx_ccm_lock;
+ gate->hw.init = &init;
+ exgate->exclusive_mask = exclusive_mask;
+
+ clk = clk_register(NULL, &gate->hw);
+ if (IS_ERR(clk))
+ kfree(exgate);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include "clk.h"
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent. No clk_set_rate support
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+struct clk_gate2 {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 bit_idx;
+ u8 flags;
+ spinlock_t *lock;
+ unsigned int *share_count;
+};
+
+#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->share_count && (*gate->share_count)++ > 0)
+ goto out;
+
+ reg = readl(gate->reg);
+ reg |= 3 << gate->bit_idx;
+ writel(reg, gate->reg);
+
+out:
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->share_count) {
+ if (WARN_ON(*gate->share_count == 0))
+ goto out;
+ else if (--(*gate->share_count) > 0)
+ goto out;
+ }
+
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+
+out:
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
+{
+ u32 val = readl(reg);
+
+ if (((val >> bit_idx) & 1) == 1)
+ return 1;
+
+ return 0;
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+
+ return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+}
+
+static void clk_gate2_disable_unused(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+ unsigned long flags = 0;
+ u32 reg;
+
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (!gate->share_count || *gate->share_count == 0) {
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+ }
+
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static struct clk_ops clk_gate2_ops = {
+ .enable = clk_gate2_enable,
+ .disable = clk_gate2_disable,
+ .disable_unused = clk_gate2_disable_unused,
+ .is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate2_flags, spinlock_t *lock,
+ unsigned int *share_count)
+{
+ struct clk_gate2 *gate;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ /* struct clk_gate2 assignments */
+ gate->reg = reg;
+ gate->bit_idx = bit_idx;
+ gate->flags = clk_gate2_flags;
+ gate->lock = lock;
+ gate->share_count = share_count;
+
+ init.name = name;
+ init.ops = &clk_gate2_ops;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ gate->hw.init = &init;
+
+ clk = clk_register(dev, &gate->hw);
+ if (IS_ERR(clk))
+ kfree(gate);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx1-clock.h>
+#include <soc/imx/timer.h>
+#include <asm/irq.h>
+
+#include "clk.h"
+
+#define MX1_CCM_BASE_ADDR 0x0021b000
+#define MX1_TIM1_BASE_ADDR 0x00220000
+#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59)
+
+static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
+ "prem", "fclk", };
+
+static struct clk *clk[IMX1_CLK_MAX];
+static struct clk_onecell_data clk_data;
+
+static void __iomem *ccm __initdata;
+#define CCM_CSCR (ccm + 0x0000)
+#define CCM_MPCTL0 (ccm + 0x0004)
+#define CCM_SPCTL0 (ccm + 0x000c)
+#define CCM_PCDR (ccm + 0x0020)
+#define SCM_GCCR (ccm + 0x0810)
+
+static void __init _mx1_clocks_init(unsigned long fref)
+{
+ clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+ clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
+ clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+ clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+ clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks));
+ clk[IMX1_CLK_MPLL] = imx_clk_pllv1(IMX_PLLV1_IMX1, "mpll", "clk32_premult", CCM_MPCTL0);
+ clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX1_CLK_SPLL] = imx_clk_pllv1(IMX_PLLV1_IMX1, "spll", "prem", CCM_SPCTL0);
+ clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+ clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+ clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+ clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
+ clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+ clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+ clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+ clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+ clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
+ clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+ clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+ clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+ ccm = ioremap(MX1_CCM_BASE_ADDR, SZ_4K);
+ BUG_ON(!ccm);
+
+ _mx1_clocks_init(fref);
+
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
+
+ mxc_timer_init(MX1_TIM1_BASE_ADDR, MX1_TIM1_INT, GPT_TYPE_IMX1);
+
+ return 0;
+}
+
+static void __init mx1_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+ BUG_ON(!ccm);
+
+ _mx1_clocks_init(32768);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt);
--- /dev/null
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx21-clock.h>
+#include <soc/imx/timer.h>
+#include <asm/irq.h>
+
+#include "clk.h"
+
+#define MX21_CCM_BASE_ADDR 0x10027000
+#define MX21_GPT1_BASE_ADDR 0x10003000
+#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26)
+
+static void __iomem *ccm __initdata;
+
+/* Register offsets */
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
+
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
+static const char *mpll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *spll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll_gate", };
+
+static struct clk *clk[IMX21_CLK_MAX];
+static struct clk_onecell_data clk_data;
+
+static void __init _mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ BUG_ON(!ccm);
+
+ clk[IMX21_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX21_CLK_CKIL] = imx_obtain_fixed_clock("ckil", lref);
+ clk[IMX21_CLK_CKIH] = imx_obtain_fixed_clock("ckih", href);
+ clk[IMX21_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+ clk[IMX21_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+
+ clk[IMX21_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX21_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX21_CLK_FPM_GATE] = imx_clk_gate("fpm_gate", "fpm", CCM_CSCR, 2);
+ clk[IMX21_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX21_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX21_CLK_IPG] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+ clk[IMX21_CLK_HCLK] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+ clk[IMX21_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX21_CLK_SPLL_SEL] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks, ARRAY_SIZE(spll_sel_clks));
+ clk[IMX21_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 19, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 20, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX21_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 29, 3);
+
+ clk[IMX21_CLK_MPLL] = imx_clk_pllv1(IMX_PLLV1_IMX21, "mpll", "mpll_sel", CCM_MPCTL0);
+
+ clk[IMX21_CLK_SPLL] = imx_clk_pllv1(IMX_PLLV1_IMX21, "spll", "spll_sel", CCM_SPCTL0);
+
+ clk[IMX21_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "fclk", CCM_PCDR0, 12, 4);
+ clk[IMX21_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX21_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+
+ clk[IMX21_CLK_PER1] = imx_clk_divider("per1", "mpll_gate", CCM_PCDR1, 0, 6);
+ clk[IMX21_CLK_PER2] = imx_clk_divider("per2", "mpll_gate", CCM_PCDR1, 8, 6);
+ clk[IMX21_CLK_PER3] = imx_clk_divider("per3", "mpll_gate", CCM_PCDR1, 16, 6);
+ clk[IMX21_CLK_PER4] = imx_clk_divider("per4", "mpll_gate", CCM_PCDR1, 24, 6);
+
+ clk[IMX21_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX21_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX21_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX21_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX21_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX21_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX21_CLK_SSI1_GATE] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX21_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX21_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX21_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+ clk[IMX21_CLK_GPIO_GATE] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX21_CLK_I2C_GATE] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX21_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX21_CLK_USB_GATE] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+ clk[IMX21_CLK_EMMA_GATE] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX21_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX21_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX21_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX21_CLK_NFC_GATE] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+ clk[IMX21_CLK_SLCDC_HCLK_GATE] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+ clk[IMX21_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+ clk[IMX21_CLK_BMI_GATE] = imx_clk_gate("bmi_gate", "hclk", CCM_PCCR0, 23);
+ clk[IMX21_CLK_USB_HCLK_GATE] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+ clk[IMX21_CLK_SLCDC_GATE] = imx_clk_gate("slcdc_gate", "hclk", CCM_PCCR0, 25);
+ clk[IMX21_CLK_LCDC_HCLK_GATE] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+ clk[IMX21_CLK_EMMA_HCLK_GATE] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+ clk[IMX21_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+ clk[IMX21_CLK_DMA_HCLK_GATE] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+ clk[IMX21_CLK_CSI_HCLK_GATE] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+
+ clk[IMX21_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+ clk[IMX21_CLK_WDOG_GATE] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX21_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX21_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX21_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX21_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX21_CLK_RTC_GATE] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX21_CLK_KPP_GATE] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX21_CLK_OWIRE_GATE] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
+
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ ccm = ioremap(MX21_CCM_BASE_ADDR, SZ_2K);
+
+ _mx21_clocks_init(lref, href);
+
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI1_IPG_GATE], "ipg", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI2_IPG_GATE], "ipg", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI3_IPG_GATE], "ipg", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER3], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_HCLK_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_GATE], "per", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_HCLK_GATE], "ahb", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_NFC_GATE], NULL, "imx21-nand.0");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_HCLK_GATE], "ahb", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_GATE], "ipg", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_WDOG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0");
+
+ mxc_timer_init(MX21_GPT1_BASE_ADDR, MX21_INT_GPT1, GPT_TYPE_IMX21);
+
+ return 0;
+}
+
+static void __init mx21_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+
+ _mx21_clocks_init(32768, 26000000);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx21-ccm", mx21_clocks_init_dt);
--- /dev/null
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include "clk.h"
+
+#define CCM_MPCTL 0x00
+#define CCM_UPCTL 0x04
+#define CCM_CCTL 0x08
+#define CCM_CGCR0 0x0C
+#define CCM_CGCR1 0x10
+#define CCM_CGCR2 0x14
+#define CCM_PCDR0 0x18
+#define CCM_PCDR1 0x1C
+#define CCM_PCDR2 0x20
+#define CCM_PCDR3 0x24
+#define CCM_RCSR 0x28
+#define CCM_CRDR 0x2C
+#define CCM_DCVR0 0x30
+#define CCM_DCVR1 0x34
+#define CCM_DCVR2 0x38
+#define CCM_DCVR3 0x3c
+#define CCM_LTR0 0x40
+#define CCM_LTR1 0x44
+#define CCM_LTR2 0x48
+#define CCM_LTR3 0x4c
+#define CCM_MCR 0x64
+
+#define ccm(x) (ccm_base + (x))
+
+static struct clk_onecell_data clk_data;
+
+static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
+static const char *per_sel_clks[] = { "ahb", "upll", };
+static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb",
+ "ipg", "dummy", "dummy", "dummy",
+ "dummy", "dummy", "per0", "per2",
+ "per13", "per14", "usbotg_ahb", "dummy",};
+
+enum mx25_clks {
+ dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
+ per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel,
+ per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
+ per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
+ per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
+ csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per,
+ gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per,
+ pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per,
+ uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb,
+ esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb,
+ reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg,
+ cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg,
+ reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9,
+ gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12,
+ iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg,
+ pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
+ sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
+ uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
+ wdt_ipg, cko_div, cko_sel, cko, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+static int __init __mx25_clocks_init(unsigned long osc_rate,
+ void __iomem *ccm_base)
+{
+ BUG_ON(!ccm_base);
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[osc] = imx_clk_fixed("osc", osc_rate);
+ clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "mpll", "osc", ccm(CCM_MPCTL));
+ clk[upll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "upll", "osc", ccm(CCM_UPCTL));
+ clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
+ clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2);
+ clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2);
+ clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6);
+ clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks));
+ clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30);
+ clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
+ clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
+ clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
+ clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6);
+ clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6);
+ clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6);
+ clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6);
+ clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6);
+ clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6);
+ clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6);
+ clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6);
+ clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6);
+ clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6);
+ clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6);
+ clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
+ clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
+ clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+ clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1);
+ clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2);
+ clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3);
+ clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
+ clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
+ clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
+ clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
+ clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
+ clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9);
+ clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10);
+ clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11);
+ clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12);
+ clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
+ clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
+ clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+ clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16);
+ /* CCM_CGCR0(17): reserved */
+ clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+ clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19);
+ clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20);
+ clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
+ clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
+ clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
+ clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+ clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25);
+ clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+ clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27);
+ clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+ /* CCM_CGCR0(29-31): reserved */
+ /* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */
+ clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2);
+ clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3);
+ clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4);
+ clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1), 5);
+ clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6);
+ clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7);
+ clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8);
+ clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9);
+ clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10);
+ clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11);
+ /* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */
+ clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
+ clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
+ clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+ /* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */
+ /* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */
+ /* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */
+ clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19);
+ clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20);
+ clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21);
+ clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22);
+ /* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */
+ /* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */
+ /* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */
+ clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+ /* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */
+ /* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */
+ clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
+ clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+ /* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */
+ clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
+ clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0);
+ clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1);
+ clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2);
+ clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3);
+ /* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */
+ clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5);
+ clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6);
+ clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7);
+ clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8);
+ clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9);
+ clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10);
+ clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
+ clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
+ clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
+ clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14);
+ clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15);
+ clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
+ clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
+ clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+ /* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
+ clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_prepare_enable(clk[emi_ahb]);
+
+ /* Clock source for gpt must be derived from AHB */
+ clk_set_parent(clk[per5_sel], clk[ahb]);
+
+ /*
+ * Let's initially set up CLKO parent as ipg, since this configuration
+ * is used on some imx25 board designs to clock the audio codec.
+ */
+ clk_set_parent(clk[cko_sel], clk[ipg]);
+
+ return 0;
+}
+
+static void __init mx25_clocks_init_dt(struct device_node *np)
+{
+ struct device_node *refnp;
+ unsigned long osc_rate = 24000000;
+ void __iomem *ccm;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(refnp, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(refnp, "fsl,imx-osc"))
+ osc_rate = rate;
+ }
+
+ ccm = of_iomap(np, 0);
+ __mx25_clocks_init(osc_rate, ccm);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);
--- /dev/null
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx27-clock.h>
+#include <soc/imx/revision.h>
+#include <soc/imx/timer.h>
+#include <asm/irq.h>
+
+#include "clk.h"
+
+#define MX27_CCM_BASE_ADDR 0x10027000
+#define MX27_GPT1_BASE_ADDR 0x10003000
+#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26)
+
+static void __iomem *ccm __initdata;
+
+/* Register offsets */
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_MPCTL1 (ccm + 0x08)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_SPCTL1 (ccm + 0x10)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
+#define CCM_CCSR (ccm + 0x28)
+
+static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
+static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
+static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
+static const char *clko_sel_clks[] = {
+ "ckil", "fpm", "ckih_gate", "ckih_gate",
+ "ckih_gate", "mpll", "spll", "cpu_div",
+ "ahb", "ipg", "per1_div", "per2_div",
+ "per3_div", "per4_div", "ssi1_div", "ssi2_div",
+ "nfc_div", "mshc_div", "vpu_div", "60m",
+ "32k", "usb_div", "dptc",
+};
+
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
+
+static struct clk *clk[IMX27_CLK_MAX];
+static struct clk_onecell_data clk_data;
+
+static void __init _mx27_clocks_init(unsigned long fref)
+{
+ BUG_ON(!ccm);
+
+ clk[IMX27_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX27_CLK_CKIH] = imx_clk_fixed("ckih", fref);
+ clk[IMX27_CLK_CKIL] = imx_clk_fixed("ckil", 32768);
+ clk[IMX27_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
+ clk[IMX27_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+ clk[IMX27_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX27_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX27_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX27_CLK_MPLL] = imx_clk_pllv1(IMX_PLLV1_IMX27, "mpll", "mpll_sel", CCM_MPCTL0);
+ clk[IMX27_CLK_SPLL] = imx_clk_pllv1(IMX_PLLV1_IMX27, "spll", "ckih_gate", CCM_SPCTL0);
+ clk[IMX27_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX27_CLK_MPLL_MAIN2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+ clk[IMX27_CLK_IPG] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ } else {
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+ clk[IMX27_CLK_IPG] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+ }
+
+ clk[IMX27_CLK_MSHC_DIV] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
+ clk[IMX27_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+ clk[IMX27_CLK_PER1_DIV] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+ clk[IMX27_CLK_PER2_DIV] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+ clk[IMX27_CLK_PER3_DIV] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+ clk[IMX27_CLK_PER4_DIV] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+ clk[IMX27_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+ clk[IMX27_CLK_VPU_DIV] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
+ clk[IMX27_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
+ clk[IMX27_CLK_CPU_SEL] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[IMX27_CLK_CLKO_SEL] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+ else
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+
+ clk[IMX27_CLK_CLKO_DIV] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+ clk[IMX27_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX27_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+ clk[IMX27_CLK_CLKO_EN] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI2_IPG_GATE] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI1_IPG_GATE] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX27_CLK_SLCDC_IPG_GATE] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX27_CLK_SDHC3_IPG_GATE] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX27_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX27_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX27_CLK_SCC_IPG_GATE] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX27_CLK_SAHARA_IPG_GATE] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX27_CLK_RTIC_IPG_GATE] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
+ clk[IMX27_CLK_RTC_IPG_GATE] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX27_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX27_CLK_OWIRE_IPG_GATE] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX27_CLK_MSHC_IPG_GATE] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX27_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+ clk[IMX27_CLK_KPP_IPG_GATE] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX27_CLK_IIM_IPG_GATE] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX27_CLK_I2C2_IPG_GATE] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX27_CLK_I2C1_IPG_GATE] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX27_CLK_GPT6_IPG_GATE] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+ clk[IMX27_CLK_GPT5_IPG_GATE] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+ clk[IMX27_CLK_GPT4_IPG_GATE] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+ clk[IMX27_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+ clk[IMX27_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+ clk[IMX27_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+ clk[IMX27_CLK_GPIO_IPG_GATE] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+ clk[IMX27_CLK_FEC_IPG_GATE] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+ clk[IMX27_CLK_EMMA_IPG_GATE] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+ clk[IMX27_CLK_DMA_IPG_GATE] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+ clk[IMX27_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+ clk[IMX27_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+ clk[IMX27_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[IMX27_CLK_MSHC_BAUD_GATE] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
+ clk[IMX27_CLK_NFC_BAUD_GATE] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
+ clk[IMX27_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
+ clk[IMX27_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
+ clk[IMX27_CLK_VPU_BAUD_GATE] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
+ clk[IMX27_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
+ clk[IMX27_CLK_PER3_GATE] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
+ clk[IMX27_CLK_PER2_GATE] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
+ clk[IMX27_CLK_PER1_GATE] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+ clk[IMX27_CLK_USB_AHB_GATE] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+ clk[IMX27_CLK_SLCDC_AHB_GATE] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+ clk[IMX27_CLK_SAHARA_AHB_GATE] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[IMX27_CLK_RTIC_AHB_GATE] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
+ clk[IMX27_CLK_LCDC_AHB_GATE] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+ clk[IMX27_CLK_VPU_AHB_GATE] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+ clk[IMX27_CLK_FEC_AHB_GATE] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+ clk[IMX27_CLK_EMMA_AHB_GATE] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+ clk[IMX27_CLK_EMI_AHB_GATE] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+ clk[IMX27_CLK_DMA_AHB_GATE] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+ clk[IMX27_CLK_CSI_AHB_GATE] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+ clk[IMX27_CLK_BROM_AHB_GATE] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+ clk[IMX27_CLK_ATA_AHB_GATE] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+ clk[IMX27_CLK_WDOG_IPG_GATE] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX27_CLK_USB_IPG_GATE] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX27_CLK_UART6_IPG_GATE] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX27_CLK_UART5_IPG_GATE] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX27_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX27_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX27_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX27_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_register_clkdev(clk[IMX27_CLK_CPU_DIV], NULL, "cpu0");
+
+ clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
+
+ imx_print_silicon_rev("i.MX27", mx27_revision());
+}
+
+int __init mx27_clocks_init(unsigned long fref)
+{
+ ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);
+
+ _mx27_clocks_init(fref);
+
+ clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
+
+ mxc_timer_init(MX27_GPT1_BASE_ADDR, MX27_INT_GPT1, GPT_TYPE_IMX21);
+
+ return 0;
+}
+
+static void __init mx27_clocks_init_dt(struct device_node *np)
+{
+ struct device_node *refnp;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(refnp, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(refnp, "clock-frequency", &fref))
+ break;
+ }
+
+ ccm = of_iomap(np, 0);
+
+ _mx27_clocks_init(fref);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx27-ccm", mx27_clocks_init_dt);
--- /dev/null
+/*
+ * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <soc/imx/revision.h>
+#include <soc/imx/timer.h>
+#include <asm/irq.h>
+
+#include "clk.h"
+
+#define MX31_CCM_BASE_ADDR 0x53f80000
+#define MX31_GPT1_BASE_ADDR 0x53f90000
+#define MX31_INT_GPT (NR_IRQS_LEGACY + 29)
+
+#define MXC_CCM_CCMR 0x00
+#define MXC_CCM_PDR0 0x04
+#define MXC_CCM_PDR1 0x08
+#define MXC_CCM_MPCTL 0x10
+#define MXC_CCM_UPCTL 0x14
+#define MXC_CCM_SRPCTL 0x18
+#define MXC_CCM_CGR0 0x20
+#define MXC_CCM_CGR1 0x24
+#define MXC_CCM_CGR2 0x28
+#define MXC_CCM_PMCR0 0x5c
+
+static const char *mcu_main_sel[] = { "spll", "mpll", };
+static const char *per_sel[] = { "per_div", "ipg", };
+static const char *csi_sel[] = { "upll", "spll", };
+static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
+
+enum mx31_clks {
+ dummy, ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg,
+ per_div, per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
+ fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
+ iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
+ uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
+ mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate,
+ sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate,
+ uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate,
+ gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+static struct clk_onecell_data clk_data;
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+ void __iomem *base;
+ struct device_node *np;
+
+ base = ioremap(MX31_CCM_BASE_ADDR, SZ_4K);
+ BUG_ON(!base);
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[ckih] = imx_clk_fixed("ckih", fref);
+ clk[ckil] = imx_clk_fixed("ckil", 32768);
+ clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX31, "mpll", "ckih", base + MXC_CCM_MPCTL);
+ clk[spll] = imx_clk_pllv1(IMX_PLLV1_IMX31, "spll", "ckih", base + MXC_CCM_SRPCTL);
+ clk[upll] = imx_clk_pllv1(IMX_PLLV1_IMX31, "upll", "ckih", base + MXC_CCM_UPCTL);
+ clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel));
+ clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3);
+ clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3);
+ clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2);
+ clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5);
+ clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel));
+ clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel));
+ clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel));
+ clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9);
+ clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2);
+ clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3);
+ clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3);
+ clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6);
+ clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0);
+ clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4);
+ clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6);
+ clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8);
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10);
+ clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14);
+ clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16);
+ clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18);
+ clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20);
+ clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22);
+ clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30);
+ clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0);
+ clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2);
+ clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4);
+ clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6);
+ clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8);
+ clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10);
+ clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12);
+ clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14);
+ clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16);
+ clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18);
+ clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20);
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22);
+ clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24);
+ clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26);
+ clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28);
+ clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30);
+ clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0);
+ clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2);
+ clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4);
+ clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6);
+ clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8);
+ clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
+ clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
+
+ if (np) {
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ }
+
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
+ clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
+ clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
+ clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
+ clk_register_clkdev(clk[epit1_gate], "epit", NULL);
+ clk_register_clkdev(clk[epit2_gate], "epit", NULL);
+ clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
+ clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+ clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+ clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+ /* i.mx31 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
+ clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
+ clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[firi_gate], "firi", NULL);
+ clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
+ clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
+ clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga");
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
+ clk_register_clkdev(clk[iim_gate], "iim", NULL);
+
+ clk_set_parent(clk[csi], clk[upll]);
+ clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ mx31_revision();
+ clk_disable_unprepare(clk[iim_gate]);
+
+ mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, GPT_TYPE_IMX31);
+
+ return 0;
+}
+
+int __init mx31_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx31_clocks_init(fref);
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+#include <soc/imx/revision.h>
+#include <soc/imx/timer.h>
+#include <asm/irq.h>
+
+#include "clk.h"
+
+#define MX35_CCM_BASE_ADDR 0x53f80000
+#define MX35_GPT1_BASE_ADDR 0x53f90000
+#define MX35_INT_GPT (NR_IRQS_LEGACY + 29)
+
+#define MXC_CCM_PDR0 0x04
+#define MX35_CCM_PDR2 0x0c
+#define MX35_CCM_PDR3 0x10
+#define MX35_CCM_PDR4 0x14
+#define MX35_CCM_MPCTL 0x1c
+#define MX35_CCM_PPCTL 0x20
+#define MX35_CCM_CGR0 0x2c
+#define MX35_CCM_CGR1 0x30
+#define MX35_CCM_CGR2 0x34
+#define MX35_CCM_CGR3 0x38
+
+struct arm_ahb_div {
+ unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+ { .arm = 1, .ahb = 4, .sel = 0},
+ { .arm = 1, .ahb = 3, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 1, .sel = 0},
+ { .arm = 1, .ahb = 5, .sel = 0},
+ { .arm = 1, .ahb = 8, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 1},
+ { .arm = 2, .ahb = 4, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static char hsp_div_532[] = { 4, 8, 3, 0 };
+static char hsp_div_400[] = { 3, 6, 3, 0 };
+
+static struct clk_onecell_data clk_data;
+
+static const char *std_sel[] = {"ppll", "arm"};
+static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
+
+enum mx35_clks {
+ ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+ arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
+ esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
+ spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
+ ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate,
+ audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate,
+ edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate,
+ esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate,
+ gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate,
+ kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
+ rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
+ ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
+ wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate,
+ gpu2d_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx35_clocks_init(void)
+{
+ void __iomem *base;
+ u32 pdr0, consumer_sel, hsp_sel;
+ struct arm_ahb_div *aad;
+ unsigned char *hsp_div;
+
+ base = ioremap(MX35_CCM_BASE_ADDR, SZ_4K);
+ BUG_ON(!base);
+
+ pdr0 = __raw_readl(base + MXC_CCM_PDR0);
+ consumer_sel = (pdr0 >> 16) & 0xf;
+ aad = &clk_consumer[consumer_sel];
+ if (!aad->arm) {
+ pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);
+ /*
+ * We are basically stuck. Continue with a default entry and hope we
+ * get far enough to actually show the above message
+ */
+ aad = &clk_consumer[0];
+ }
+
+ clk[ckih] = imx_clk_fixed("ckih", 24000000);
+ clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "mpll", "ckih", base + MX35_CCM_MPCTL);
+ clk[ppll] = imx_clk_pllv1(IMX_PLLV1_IMX35, "ppll", "ckih", base + MX35_CCM_PPCTL);
+
+ clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4);
+
+ if (aad->sel)
+ clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm);
+ else
+ clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm);
+
+ if (clk_get_rate(clk[arm]) > 400000000)
+ hsp_div = hsp_div_532;
+ else
+ hsp_div = hsp_div_400;
+
+ hsp_sel = (pdr0 >> 20) & 0x3;
+ if (!hsp_div[hsp_sel]) {
+ pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);
+ hsp_sel = 0;
+ }
+
+ clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]);
+
+ clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+
+ clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6);
+ clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3);
+ clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel));
+
+ clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6);
+
+ clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6);
+ clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6);
+ clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6);
+
+ clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */
+ clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6);
+
+ clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3);
+ clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6);
+ clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3);
+ clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6);
+
+ clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6);
+
+ clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
+
+ clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6);
+
+ clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0);
+ clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2);
+ clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4);
+ clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0, 6);
+ clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0, 8);
+ clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10);
+ clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12);
+ clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14);
+ clk[edio_gate] = imx_clk_gate2("edio_gate", "ipg", base + MX35_CCM_CGR0, 16);
+ clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18);
+ clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20);
+ clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22);
+ clk[esai_gate] = imx_clk_gate2("esai_gate", "ipg", base + MX35_CCM_CGR0, 24);
+ clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26);
+ clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28);
+ clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30);
+
+ clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1, 0);
+ clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1, 2);
+ clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1, 4);
+ clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1, 6);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1, 8);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14);
+ clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16);
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18);
+ clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20);
+ clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22);
+ clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24);
+ clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26);
+ clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28);
+ clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30);
+
+ clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2, 0);
+ clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2, 2);
+ clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2, 4);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2, 6);
+ clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2, 8);
+ clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10);
+ clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12);
+ clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14);
+ clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16);
+ clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18);
+ clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20);
+ clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22);
+ clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24);
+ clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
+ clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
+
+ clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0);
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
+ clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
+ clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
+ clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
+ clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
+ clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
+ clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
+ clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
+ clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
+ /* i.mx35 has the i.mx27 type fec */
+ clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
+ clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+ clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+ clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+ clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+ /* i.mx35 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
+ clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+ clk_register_clkdev(clk[admux_gate], "audmux", NULL);
+
+ clk_prepare_enable(clk[spba_gate]);
+ clk_prepare_enable(clk[gpio1_gate]);
+ clk_prepare_enable(clk[gpio2_gate]);
+ clk_prepare_enable(clk[gpio3_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
+ clk_prepare_enable(clk[iomuxc_gate]);
+
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+
+ mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, GPT_TYPE_IMX31);
+
+ return 0;
+}
+
+static void __init mx35_clocks_init_dt(struct device_node *ccm_node)
+{
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data);
+
+ mx35_clocks_init();
+}
+CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt);
--- /dev/null
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <soc/imx/revision.h>
+#include <dt-bindings/clock/imx5-clock.h>
+
+#include "clk.h"
+
+#define MX51_DPLL1_BASE 0x83f80000
+#define MX51_DPLL2_BASE 0x83f84000
+#define MX51_DPLL3_BASE 0x83f88000
+
+#define MX53_DPLL1_BASE 0x63f80000
+#define MX53_DPLL2_BASE 0x63f84000
+#define MX53_DPLL3_BASE 0x63f88000
+#define MX53_DPLL4_BASE 0x63f8c000
+
+#define MXC_CCM_CCR (ccm_base + 0x00)
+#define MXC_CCM_CCDR (ccm_base + 0x04)
+#define MXC_CCM_CSR (ccm_base + 0x08)
+#define MXC_CCM_CCSR (ccm_base + 0x0c)
+#define MXC_CCM_CACRR (ccm_base + 0x10)
+#define MXC_CCM_CBCDR (ccm_base + 0x14)
+#define MXC_CCM_CBCMR (ccm_base + 0x18)
+#define MXC_CCM_CSCMR1 (ccm_base + 0x1c)
+#define MXC_CCM_CSCMR2 (ccm_base + 0x20)
+#define MXC_CCM_CSCDR1 (ccm_base + 0x24)
+#define MXC_CCM_CS1CDR (ccm_base + 0x28)
+#define MXC_CCM_CS2CDR (ccm_base + 0x2c)
+#define MXC_CCM_CDCDR (ccm_base + 0x30)
+#define MXC_CCM_CHSCDR (ccm_base + 0x34)
+#define MXC_CCM_CSCDR2 (ccm_base + 0x38)
+#define MXC_CCM_CSCDR3 (ccm_base + 0x3c)
+#define MXC_CCM_CSCDR4 (ccm_base + 0x40)
+#define MXC_CCM_CWDR (ccm_base + 0x44)
+#define MXC_CCM_CDHIPR (ccm_base + 0x48)
+#define MXC_CCM_CDCR (ccm_base + 0x4c)
+#define MXC_CCM_CTOR (ccm_base + 0x50)
+#define MXC_CCM_CLPCR (ccm_base + 0x54)
+#define MXC_CCM_CISR (ccm_base + 0x58)
+#define MXC_CCM_CIMR (ccm_base + 0x5c)
+#define MXC_CCM_CCOSR (ccm_base + 0x60)
+#define MXC_CCM_CGPR (ccm_base + 0x64)
+#define MXC_CCM_CCGR0 (ccm_base + 0x68)
+#define MXC_CCM_CCGR1 (ccm_base + 0x6c)
+#define MXC_CCM_CCGR2 (ccm_base + 0x70)
+#define MXC_CCM_CCGR3 (ccm_base + 0x74)
+#define MXC_CCM_CCGR4 (ccm_base + 0x78)
+#define MXC_CCM_CCGR5 (ccm_base + 0x7c)
+#define MXC_CCM_CCGR6 (ccm_base + 0x80)
+#define MXC_CCM_CCGR7 (ccm_base + 0x84)
+
+/* Low-power Audio Playback Mode clock */
+static const char *lp_apm_sel[] = { "osc", };
+
+/* This is used multiple times */
+static const char *standard_pll_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "lp_apm", };
+static const char *periph_apm_sel[] = { "pll1_sw", "pll3_sw", "lp_apm", };
+static const char *main_bus_sel[] = { "pll2_sw", "periph_apm", };
+static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", };
+static const char *per_root_sel[] = { "per_podf", "ipg", };
+static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", };
+static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", };
+static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", };
+static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", };
+static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
+static const char *emi_slow_sel[] = { "main_bus", "ahb", };
+static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
+static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", };
+static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", };
+static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
+static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
+static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
+static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
+static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
+static const char *mx53_cko1_sel[] = {
+ "cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw",
+ "emi_slow_podf", "pll4_sw", "nfc_podf", "dummy",
+ "di_pred", "dummy", "dummy", "ahb",
+ "ipg", "per_root", "ckil", "dummy",};
+static const char *mx53_cko2_sel[] = {
+ "dummy"/* dptc_core */, "dummy"/* dptc_perich */,
+ "dummy", "esdhc_a_podf",
+ "usboh3_podf", "dummy"/* wrck_clk_root */,
+ "ecspi_podf", "dummy"/* pll1_ref_clk */,
+ "esdhc_b_podf", "dummy"/* ddr_clk_root */,
+ "dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */,
+ "vpu_sel", "ipu_sel",
+ "osc", "ckih1",
+ "dummy", "esdhc_c_sel",
+ "ssi1_root_podf", "ssi2_root_podf",
+ "dummy", "dummy",
+ "dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */,
+ "dummy"/* tve_out */, "usb_phy_sel",
+ "tve_sel", "lp_apm",
+ "uart_root", "dummy"/* spdif0_clk_root */,
+ "dummy", "dummy", };
+static const char *mx51_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", };
+static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", };
+static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", };
+static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", };
+static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
+static const char *step_sels[] = { "lp_apm", };
+static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" };
+
+static struct clk *clk[IMX5_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static void __init mx5_clocks_common_init(void __iomem *ccm_base)
+{
+ clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", 0);
+
+ clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
+ periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
+ clk[IMX5_CLK_MAIN_BUS] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
+ main_bus_sel, ARRAY_SIZE(main_bus_sel));
+ clk[IMX5_CLK_PER_LP_APM] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
+ per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
+ clk[IMX5_CLK_PER_PRED1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
+ clk[IMX5_CLK_PER_PRED2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
+ clk[IMX5_CLK_PER_PODF] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
+ clk[IMX5_CLK_PER_ROOT] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
+ per_root_sel, ARRAY_SIZE(per_root_sel));
+ clk[IMX5_CLK_AHB] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
+ clk[IMX5_CLK_AHB_MAX] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
+ clk[IMX5_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", MXC_CCM_CCGR0, 24);
+ clk[IMX5_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", MXC_CCM_CCGR0, 26);
+ clk[IMX5_CLK_TMAX1] = imx_clk_gate2("tmax1", "ahb", MXC_CCM_CCGR1, 0);
+ clk[IMX5_CLK_TMAX2] = imx_clk_gate2("tmax2", "ahb", MXC_CCM_CCGR1, 2);
+ clk[IMX5_CLK_TMAX3] = imx_clk_gate2("tmax3", "ahb", MXC_CCM_CCGR1, 4);
+ clk[IMX5_CLK_SPBA] = imx_clk_gate2("spba", "ipg", MXC_CCM_CCGR5, 0);
+ clk[IMX5_CLK_IPG] = imx_clk_divider("ipg", "ahb", MXC_CCM_CBCDR, 8, 2);
+ clk[IMX5_CLK_AXI_A] = imx_clk_divider("axi_a", "main_bus", MXC_CCM_CBCDR, 16, 3);
+ clk[IMX5_CLK_AXI_B] = imx_clk_divider("axi_b", "main_bus", MXC_CCM_CBCDR, 19, 3);
+ clk[IMX5_CLK_UART_SEL] = imx_clk_mux("uart_sel", MXC_CCM_CSCMR1, 24, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_UART_PRED] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3);
+ clk[IMX5_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3);
+
+ clk[IMX5_CLK_ESDHC_A_SEL] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_B_SEL] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ESDHC_A_PRED] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3);
+ clk[IMX5_CLK_ESDHC_A_PODF] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3);
+ clk[IMX5_CLK_ESDHC_B_PRED] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3);
+ clk[IMX5_CLK_ESDHC_B_PODF] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3);
+ clk[IMX5_CLK_ESDHC_C_SEL] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+ clk[IMX5_CLK_ESDHC_D_SEL] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
+
+ clk[IMX5_CLK_EMI_SEL] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1,
+ emi_slow_sel, ARRAY_SIZE(emi_slow_sel));
+ clk[IMX5_CLK_EMI_SLOW_PODF] = imx_clk_divider("emi_slow_podf", "emi_sel", MXC_CCM_CBCDR, 22, 3);
+ clk[IMX5_CLK_NFC_PODF] = imx_clk_divider("nfc_podf", "emi_slow_podf", MXC_CCM_CBCDR, 13, 3);
+ clk[IMX5_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", MXC_CCM_CSCMR1, 4, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_ECSPI_PRED] = imx_clk_divider("ecspi_pred", "ecspi_sel", MXC_CCM_CSCDR2, 25, 3);
+ clk[IMX5_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_pred", MXC_CCM_CSCDR2, 19, 6);
+ clk[IMX5_CLK_USBOH3_SEL] = imx_clk_mux("usboh3_sel", MXC_CCM_CSCMR1, 22, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[IMX5_CLK_USBOH3_PRED] = imx_clk_divider("usboh3_pred", "usboh3_sel", MXC_CCM_CSCDR1, 8, 3);
+ clk[IMX5_CLK_USBOH3_PODF] = imx_clk_divider("usboh3_podf", "usboh3_pred", MXC_CCM_CSCDR1, 6, 2);
+ clk[IMX5_CLK_USB_PHY_PRED] = imx_clk_divider("usb_phy_pred", "pll3_sw", MXC_CCM_CDCDR, 3, 3);
+ clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
+ clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
+ usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
+ clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels));
+ clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels));
+ clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3);
+ clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
+ clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
+ clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
+ clk[IMX5_CLK_UART1_PER_GATE] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
+ clk[IMX5_CLK_UART2_IPG_GATE] = imx_clk_gate2("uart2_ipg_gate", "ipg", MXC_CCM_CCGR1, 10);
+ clk[IMX5_CLK_UART2_PER_GATE] = imx_clk_gate2("uart2_per_gate", "uart_root", MXC_CCM_CCGR1, 12);
+ clk[IMX5_CLK_UART3_IPG_GATE] = imx_clk_gate2("uart3_ipg_gate", "ipg", MXC_CCM_CCGR1, 14);
+ clk[IMX5_CLK_UART3_PER_GATE] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
+ clk[IMX5_CLK_I2C1_GATE] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
+ clk[IMX5_CLK_I2C2_GATE] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
+ clk[IMX5_CLK_PWM1_IPG_GATE] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
+ clk[IMX5_CLK_PWM1_HF_GATE] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12);
+ clk[IMX5_CLK_PWM2_IPG_GATE] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
+ clk[IMX5_CLK_PWM2_HF_GATE] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16);
+ clk[IMX5_CLK_GPT_IPG_GATE] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[IMX5_CLK_GPT_HF_GATE] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20);
+ clk[IMX5_CLK_FEC_GATE] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
+ clk[IMX5_CLK_USBOH3_GATE] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
+ clk[IMX5_CLK_USBOH3_PER_GATE] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
+ clk[IMX5_CLK_ESDHC1_IPG_GATE] = imx_clk_gate2("esdhc1_ipg_gate", "ipg", MXC_CCM_CCGR3, 0);
+ clk[IMX5_CLK_ESDHC2_IPG_GATE] = imx_clk_gate2("esdhc2_ipg_gate", "ipg", MXC_CCM_CCGR3, 4);
+ clk[IMX5_CLK_ESDHC3_IPG_GATE] = imx_clk_gate2("esdhc3_ipg_gate", "ipg", MXC_CCM_CCGR3, 8);
+ clk[IMX5_CLK_ESDHC4_IPG_GATE] = imx_clk_gate2("esdhc4_ipg_gate", "ipg", MXC_CCM_CCGR3, 12);
+ clk[IMX5_CLK_SSI1_IPG_GATE] = imx_clk_gate2("ssi1_ipg_gate", "ipg", MXC_CCM_CCGR3, 16);
+ clk[IMX5_CLK_SSI2_IPG_GATE] = imx_clk_gate2("ssi2_ipg_gate", "ipg", MXC_CCM_CCGR3, 20);
+ clk[IMX5_CLK_SSI3_IPG_GATE] = imx_clk_gate2("ssi3_ipg_gate", "ipg", MXC_CCM_CCGR3, 24);
+ clk[IMX5_CLK_ECSPI1_IPG_GATE] = imx_clk_gate2("ecspi1_ipg_gate", "ipg", MXC_CCM_CCGR4, 18);
+ clk[IMX5_CLK_ECSPI1_PER_GATE] = imx_clk_gate2("ecspi1_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 20);
+ clk[IMX5_CLK_ECSPI2_IPG_GATE] = imx_clk_gate2("ecspi2_ipg_gate", "ipg", MXC_CCM_CCGR4, 22);
+ clk[IMX5_CLK_ECSPI2_PER_GATE] = imx_clk_gate2("ecspi2_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 24);
+ clk[IMX5_CLK_CSPI_IPG_GATE] = imx_clk_gate2("cspi_ipg_gate", "ipg", MXC_CCM_CCGR4, 26);
+ clk[IMX5_CLK_SDMA_GATE] = imx_clk_gate2("sdma_gate", "ipg", MXC_CCM_CCGR4, 30);
+ clk[IMX5_CLK_EMI_FAST_GATE] = imx_clk_gate2("emi_fast_gate", "dummy", MXC_CCM_CCGR5, 14);
+ clk[IMX5_CLK_EMI_SLOW_GATE] = imx_clk_gate2("emi_slow_gate", "emi_slow_podf", MXC_CCM_CCGR5, 16);
+ clk[IMX5_CLK_IPU_SEL] = imx_clk_mux("ipu_sel", MXC_CCM_CBCMR, 6, 2, ipu_sel, ARRAY_SIZE(ipu_sel));
+ clk[IMX5_CLK_IPU_GATE] = imx_clk_gate2("ipu_gate", "ipu_sel", MXC_CCM_CCGR5, 10);
+ clk[IMX5_CLK_NFC_GATE] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
+ clk[IMX5_CLK_IPU_DI0_GATE] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
+ clk[IMX5_CLK_IPU_DI1_GATE] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+ clk[IMX5_CLK_GPU3D_SEL] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel));
+ clk[IMX5_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel));
+ clk[IMX5_CLK_GPU3D_GATE] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2);
+ clk[IMX5_CLK_GARB_GATE] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4);
+ clk[IMX5_CLK_GPU2D_GATE] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14);
+ clk[IMX5_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
+ clk[IMX5_CLK_VPU_GATE] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
+ clk[IMX5_CLK_VPU_REFERENCE_GATE] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
+ clk[IMX5_CLK_UART4_IPG_GATE] = imx_clk_gate2("uart4_ipg_gate", "ipg", MXC_CCM_CCGR7, 8);
+ clk[IMX5_CLK_UART4_PER_GATE] = imx_clk_gate2("uart4_per_gate", "uart_root", MXC_CCM_CCGR7, 10);
+ clk[IMX5_CLK_UART5_IPG_GATE] = imx_clk_gate2("uart5_ipg_gate", "ipg", MXC_CCM_CCGR7, 12);
+ clk[IMX5_CLK_UART5_PER_GATE] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14);
+ clk[IMX5_CLK_GPC_DVFS] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24);
+
+ clk[IMX5_CLK_SSI_APM] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels));
+ clk[IMX5_CLK_SSI1_ROOT_SEL] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[IMX5_CLK_SSI2_ROOT_SEL] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[IMX5_CLK_SSI3_ROOT_SEL] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels));
+ clk[IMX5_CLK_SSI_EXT1_SEL] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[IMX5_CLK_SSI_EXT2_SEL] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[IMX5_CLK_SSI_EXT1_COM_SEL] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels));
+ clk[IMX5_CLK_SSI_EXT2_COM_SEL] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels));
+ clk[IMX5_CLK_SSI1_ROOT_PRED] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3);
+ clk[IMX5_CLK_SSI1_ROOT_PODF] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6);
+ clk[IMX5_CLK_SSI2_ROOT_PRED] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3);
+ clk[IMX5_CLK_SSI2_ROOT_PODF] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6);
+ clk[IMX5_CLK_SSI_EXT1_PRED] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3);
+ clk[IMX5_CLK_SSI_EXT1_PODF] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6);
+ clk[IMX5_CLK_SSI_EXT2_PRED] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3);
+ clk[IMX5_CLK_SSI_EXT2_PODF] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6);
+ clk[IMX5_CLK_SSI1_ROOT_GATE] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18);
+ clk[IMX5_CLK_SSI2_ROOT_GATE] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22);
+ clk[IMX5_CLK_SSI3_ROOT_GATE] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
+ clk[IMX5_CLK_SSI_EXT1_GATE] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
+ clk[IMX5_CLK_SSI_EXT2_GATE] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
+ clk[IMX5_CLK_EPIT1_IPG_GATE] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2);
+ clk[IMX5_CLK_EPIT1_HF_GATE] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4);
+ clk[IMX5_CLK_EPIT2_IPG_GATE] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
+ clk[IMX5_CLK_EPIT2_HF_GATE] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
+ clk[IMX5_CLK_OWIRE_GATE] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
+ clk[IMX5_CLK_SRTC_GATE] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
+ clk[IMX5_CLK_PATA_GATE] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
+ clk[IMX5_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", MXC_CCM_CSCMR2, 0, 2, spdif_sel, ARRAY_SIZE(spdif_sel));
+ clk[IMX5_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", MXC_CCM_CDCDR, 25, 3);
+ clk[IMX5_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", MXC_CCM_CDCDR, 19, 6);
+ clk[IMX5_CLK_SPDIF0_COM_SEL] = imx_clk_mux_flags("spdif0_com_sel", MXC_CCM_CSCMR2, 4, 1,
+ spdif0_com_sel, ARRAY_SIZE(spdif0_com_sel), CLK_SET_RATE_PARENT);
+ clk[IMX5_CLK_SPDIF0_GATE] = imx_clk_gate2("spdif0_gate", "spdif0_com_sel", MXC_CCM_CCGR5, 26);
+ clk[IMX5_CLK_SPDIF_IPG_GATE] = imx_clk_gate2("spdif_ipg_gate", "ipg", MXC_CCM_CCGR5, 30);
+ clk[IMX5_CLK_SAHARA_IPG_GATE] = imx_clk_gate2("sahara_ipg_gate", "ipg", MXC_CCM_CCGR4, 14);
+ clk[IMX5_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "usb_phy1_gate", 1, 1);
+
+ clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0");
+ clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL);
+
+ /* Set SDHC parents to be PLL2 */
+ clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
+ clk_set_parent(clk[IMX5_CLK_ESDHC_B_SEL], clk[IMX5_CLK_PLL2_SW]);
+
+ /* move usb phy clk to 24MHz */
+ clk_set_parent(clk[IMX5_CLK_USB_PHY_SEL], clk[IMX5_CLK_OSC]);
+
+ clk_prepare_enable(clk[IMX5_CLK_GPC_DVFS]);
+ clk_prepare_enable(clk[IMX5_CLK_AHB_MAX]); /* esdhc3 */
+ clk_prepare_enable(clk[IMX5_CLK_AIPS_TZ1]);
+ clk_prepare_enable(clk[IMX5_CLK_AIPS_TZ2]); /* fec */
+ clk_prepare_enable(clk[IMX5_CLK_SPBA]);
+ clk_prepare_enable(clk[IMX5_CLK_EMI_FAST_GATE]); /* fec */
+ clk_prepare_enable(clk[IMX5_CLK_EMI_SLOW_GATE]); /* eim */
+ clk_prepare_enable(clk[IMX5_CLK_MIPI_HSC1_GATE]);
+ clk_prepare_enable(clk[IMX5_CLK_MIPI_HSC2_GATE]);
+ clk_prepare_enable(clk[IMX5_CLK_MIPI_ESC_GATE]);
+ clk_prepare_enable(clk[IMX5_CLK_MIPI_HSP_GATE]);
+ clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
+ clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
+ clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
+}
+
+static void __init mx50_clocks_init(struct device_node *np)
+{
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
+ unsigned long r;
+
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
+
+ clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
+ lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+ clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+ clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
+ clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
+ clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+ clk[IMX5_CLK_USB_PHY1_GATE] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
+ clk[IMX5_CLK_USB_PHY2_GATE] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
+ clk[IMX5_CLK_I2C3_GATE] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+
+ clk[IMX5_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
+ mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
+ clk[IMX5_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
+ clk[IMX5_CLK_CKO1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
+
+ clk[IMX5_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
+ mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
+ clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
+ clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ /* set SDHC root clock to 200MHZ*/
+ clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
+ clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
+
+ clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
+ imx_print_silicon_rev("i.MX50", IMX_CHIP_REVISION_1_1);
+ clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
+
+ r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
+ clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
+}
+CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
+
+static void __init mx51_clocks_init(struct device_node *np)
+{
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
+ u32 val;
+
+ pll_base = ioremap(MX51_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
+
+ clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
+ lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+ clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
+ clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
+ clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
+ clk[IMX5_CLK_TVE_SEL] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
+ mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
+ clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
+ clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
+ clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+ clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6);
+ clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10);
+ clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+ clk[IMX5_CLK_USB_PHY_GATE] = imx_clk_gate2("usb_phy_gate", "usb_phy_sel", MXC_CCM_CCGR2, 0);
+ clk[IMX5_CLK_HSI2C_GATE] = imx_clk_gate2("hsi2c_gate", "ipg", MXC_CCM_CCGR1, 22);
+ clk[IMX5_CLK_MIPI_HSC1_GATE] = imx_clk_gate2("mipi_hsc1_gate", "ipg", MXC_CCM_CCGR4, 6);
+ clk[IMX5_CLK_MIPI_HSC2_GATE] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8);
+ clk[IMX5_CLK_MIPI_ESC_GATE] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
+ clk[IMX5_CLK_MIPI_HSP_GATE] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
+ clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
+ mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
+ clk[IMX5_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
+ spdif_sel, ARRAY_SIZE(spdif_sel));
+ clk[IMX5_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
+ clk[IMX5_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
+ clk[IMX5_CLK_SPDIF1_COM_SEL] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
+ mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
+ clk[IMX5_CLK_SPDIF1_GATE] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ /* set the usboh3 parent to pll2_sw */
+ clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]);
+
+ /* set SDHC root clock to 166.25MHZ*/
+ clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000);
+ clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000);
+
+ clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
+ imx_print_silicon_rev("i.MX51", mx51_revision());
+ clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
+
+ /*
+ * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
+ * longer supported. Set to one for better power saving.
+ *
+ * The effect of not setting these bits is that MIPI clocks can't be
+ * enabled without the IPU clock being enabled aswell.
+ */
+ val = readl(MXC_CCM_CCDR);
+ val |= 1 << 18;
+ writel(val, MXC_CCM_CCDR);
+
+ val = readl(MXC_CCM_CLPCR);
+ val |= 1 << 23;
+ writel(val, MXC_CCM_CLPCR);
+}
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
+
+static void __init mx53_clocks_init(struct device_node *np)
+{
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
+ unsigned long r;
+
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL4_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
+
+ clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
+ lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+ clk[IMX5_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[IMX5_CLK_LDB_DI1_DIV] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0);
+ clk[IMX5_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+ mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT);
+ clk[IMX5_CLK_DI_PLL4_PODF] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
+ clk[IMX5_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[IMX5_CLK_LDB_DI0_DIV] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0);
+ clk[IMX5_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+ mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
+ clk[IMX5_CLK_LDB_DI0_GATE] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
+ clk[IMX5_CLK_LDB_DI1_GATE] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
+ clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
+ clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+ clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
+ clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
+ clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
+ clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+ clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
+ clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
+ clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+ clk[IMX5_CLK_USB_PHY1_GATE] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
+ clk[IMX5_CLK_USB_PHY2_GATE] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
+ clk[IMX5_CLK_CAN_SEL] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2,
+ mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
+ clk[IMX5_CLK_CAN1_SERIAL_GATE] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
+ clk[IMX5_CLK_CAN1_IPG_GATE] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+ clk[IMX5_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2);
+ clk[IMX5_CLK_CAN2_SERIAL_GATE] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
+ clk[IMX5_CLK_CAN2_IPG_GATE] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
+ clk[IMX5_CLK_I2C3_GATE] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+ clk[IMX5_CLK_SATA_GATE] = imx_clk_gate2("sata_gate", "ipg", MXC_CCM_CCGR4, 2);
+
+ clk[IMX5_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
+ mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
+ clk[IMX5_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
+ clk[IMX5_CLK_CKO1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
+
+ clk[IMX5_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
+ mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
+ clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
+ clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
+ clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
+ mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
+ clk[IMX5_CLK_ARM] = imx_clk_cpu("arm", "cpu_podf",
+ clk[IMX5_CLK_CPU_PODF],
+ clk[IMX5_CLK_CPU_PODF_SEL],
+ clk[IMX5_CLK_PLL1_SW],
+ clk[IMX5_CLK_STEP_SEL]);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ /* set SDHC root clock to 200MHZ*/
+ clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
+ clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
+
+ /* move can bus clk to 24MHz */
+ clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]);
+
+ /* make sure step clock is running from 24MHz */
+ clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]);
+
+ clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
+ imx_print_silicon_rev("i.MX53", mx53_revision());
+ clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
+
+ r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
+ clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
+}
+CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
--- /dev/null
+/*
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <soc/imx/revision.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+#include "clk.h"
+
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *gpu_axi_sels[] = { "axi", "ahb", };
+static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
+static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
+static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
+static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
+static const char *pcie_axi_sels[] = { "axi", "ahb", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
+static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vdo_axi_sels[] = { "axi", "ahb", };
+static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
+ "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
+static const char *cko2_sels[] = {
+ "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
+ "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
+ "usdhc3", "dummy", "arm", "ipu1",
+ "ipu2", "vdo_axi", "osc", "gpu2d_core",
+ "gpu3d_core", "usdhc2", "ssi1", "ssi2",
+ "ssi3", "gpu3d_shader", "vpu_axi", "can_root",
+ "ldb_di0", "ldb_di1", "esai_extal", "eim_slow",
+ "uart_serial", "spdif", "asrc", "hsi_tx",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
+ "pcie_ref_125m", "sata_ref_100m",
+};
+static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+
+static struct clk *clk[IMX6QDL_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static unsigned int const clks_init_on[] __initconst = {
+ IMX6QDL_CLK_MMDC_CH0_AXI,
+ IMX6QDL_CLK_ROM,
+ IMX6QDL_CLK_ARM,
+};
+
+static struct clk_div_table clk_enet_ref_table[] = {
+ { .val = 0, .div = 20, },
+ { .val = 1, .div = 10, },
+ { .val = 2, .div = 5, },
+ { .val = 3, .div = 4, },
+ { /* sentinel */ }
+};
+
+static struct clk_div_table post_div_table[] = {
+ { .val = 2, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 0, .div = 4, },
+ { /* sentinel */ }
+};
+
+static struct clk_div_table video_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 1, },
+ { .val = 3, .div = 4, },
+ { /* sentinel */ }
+};
+
+static unsigned int share_count_esai;
+static unsigned int share_count_asrc;
+static unsigned int share_count_ssi1;
+static unsigned int share_count_ssi2;
+static unsigned int share_count_ssi3;
+static unsigned int share_count_mipi_core_cfg;
+
+static inline int clk_on_imx6q(void)
+{
+ return of_machine_is_compatible("fsl,imx6q");
+}
+
+static inline int clk_on_imx6dl(void)
+{
+ return of_machine_is_compatible("fsl,imx6dl");
+}
+
+static void __init imx6q_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i;
+ int ret;
+
+ clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ /* Clock source from external clock via CLK1/2 PADs */
+ clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+ clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
+ if (clk_on_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) {
+ post_div_table[1].div = 1;
+ post_div_table[2].div = 1;
+ video_div_table[1].div = 1;
+ video_div_table[3].div = 1;
+ }
+
+ clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ /* type name parent_name base div_mask */
+ clk[IMX6QDL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+ clk[IMX6QDL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+ clk[IMX6QDL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+ clk[IMX6QDL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+ clk[IMX6QDL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+ clk[IMX6QDL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+ clk[IMX6QDL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+ clk[IMX6QDL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clk[IMX6QDL_PLL1_BYPASS], clk[IMX6QDL_CLK_PLL1]);
+ clk_set_parent(clk[IMX6QDL_PLL2_BYPASS], clk[IMX6QDL_CLK_PLL2]);
+ clk_set_parent(clk[IMX6QDL_PLL3_BYPASS], clk[IMX6QDL_CLK_PLL3]);
+ clk_set_parent(clk[IMX6QDL_PLL4_BYPASS], clk[IMX6QDL_CLK_PLL4]);
+ clk_set_parent(clk[IMX6QDL_PLL5_BYPASS], clk[IMX6QDL_CLK_PLL5]);
+ clk_set_parent(clk[IMX6QDL_PLL6_BYPASS], clk[IMX6QDL_CLK_PLL6]);
+ clk_set_parent(clk[IMX6QDL_PLL7_BYPASS], clk[IMX6QDL_CLK_PLL7]);
+
+ clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
+ clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
+ clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
+ clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
+
+ /*
+ * Bit 20 is the reserved and read-only bit, we do this only for:
+ * - Do nothing for usbphy clk_enable/disable
+ * - Keep refcount when do usbphy clk_enable/disable, in that case,
+ * the clk framework may need to enable/disable usbphy's parent
+ */
+ clk[IMX6QDL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clk[IMX6QDL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+ /*
+ * usbphy*_gate needs to be on after system boots up, and software
+ * never needs to control it anymore.
+ */
+ clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+ clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+ clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+
+ clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
+ clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+ clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+
+ clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ /*
+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
+ * independently configured as clock inputs or outputs. We treat
+ * the "output_enable" bit as a gate, even though it's really just
+ * enabling clock output.
+ */
+ clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12));
+ clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13));
+
+ clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
+ clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11));
+
+ /* name parent_name reg idx */
+ clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clk[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clk[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clk[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clk[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clk[IMX6QDL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clk[IMX6QDL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+ clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
+ if (clk_on_imx6dl()) {
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
+ }
+
+ clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+ np = ccm_node;
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* name reg shift width parent_names num_parents */
+ clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clk[IMX6QDL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clk[IMX6QDL_CLK_AXI_SEL] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
+ clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ if (clk_on_imx6q()) {
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ }
+ clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+ clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
+ clk[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
+ clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
+ clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
+ clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clk[IMX6QDL_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clk[IMX6QDL_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clk[IMX6QDL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clk[IMX6QDL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+
+ /* name parent_name reg shift width */
+ clk[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clk[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clk[IMX6QDL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clk[IMX6QDL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clk[IMX6QDL_CLK_ASRC_PRED] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
+ clk[IMX6QDL_CLK_ASRC_PODF] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
+ clk[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clk[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ clk[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
+ clk[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
+ clk[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
+ clk[IMX6QDL_CLK_IPU1_PODF] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
+ clk[IMX6QDL_CLK_IPU2_PODF] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
+ clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
+ clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
+ clk[IMX6QDL_CLK_HSI_TX_PODF] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
+ clk[IMX6QDL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clk[IMX6QDL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clk[IMX6QDL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clk[IMX6QDL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clk[IMX6QDL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clk[IMX6QDL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
+ clk[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clk[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clk[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
+ clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
+ clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
+ clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+
+ /* name parent_name reg shift width busy: reg, shift */
+ clk[IMX6QDL_CLK_AXI] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clk[IMX6QDL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clk[IMX6QDL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+
+ /* name parent_name reg shift */
+ clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2_shared("asrc", "asrc_podf", base + 0x68, 6, &share_count_asrc);
+ clk[IMX6QDL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
+ clk[IMX6QDL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
+ clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
+ clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clk[IMX6QDL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
+ clk[IMX6QDL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
+ clk[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
+ clk[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
+ clk[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
+ if (clk_on_imx6dl())
+ clk[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
+ else
+ clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
+ clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
+ clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
+ if (clk_on_imx6dl())
+ /*
+ * The multiplexer and divider of imx6q clock gpu3d_shader get
+ * redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl.
+ */
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
+ else
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
+ clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
+ clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
+ clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4);
+ clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
+ clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
+ clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
+ clk[IMX6QDL_CLK_IIM] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
+ clk[IMX6QDL_CLK_ENFC] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
+ clk[IMX6QDL_CLK_VDOA] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
+ clk[IMX6QDL_CLK_IPU1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
+ clk[IMX6QDL_CLK_IPU1_DI1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
+ clk[IMX6QDL_CLK_IPU2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
+ clk[IMX6QDL_CLK_IPU2_DI0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
+ clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
+ clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
+ clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg);
+ if (clk_on_imx6dl())
+ /*
+ * The multiplexer and divider of the imx6q clock gpu2d get
+ * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl.
+ */
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
+ else
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
+ clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
+ clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
+ clk[IMX6QDL_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[IMX6QDL_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clk[IMX6QDL_CLK_PWM1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
+ clk[IMX6QDL_CLK_PWM2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
+ clk[IMX6QDL_CLK_PWM3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
+ clk[IMX6QDL_CLK_PWM4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
+ clk[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
+ clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ahb", base + 0x7c, 4);
+ clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
+ clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clk[IMX6QDL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clk[IMX6QDL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clk[IMX6QDL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
+ clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
+ clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clk[IMX6QDL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
+ clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
+ clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
+ clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+
+ /*
+ * The gpt_3m clock is not available on i.MX6Q TO1.0. Let's point it
+ * to clock gpt_ipg_per to ease the gpt driver code.
+ */
+ if (clk_on_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0)
+ clk[IMX6QDL_CLK_GPT_3M] = clk[IMX6QDL_CLK_GPT_IPG_PER];
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
+
+ if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
+ clk_on_imx6dl()) {
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ }
+
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_SEL], clk[IMX6QDL_CLK_IPU1_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_SEL], clk[IMX6QDL_CLK_IPU1_DI1_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_SEL], clk[IMX6QDL_CLK_IPU2_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_SEL], clk[IMX6QDL_CLK_IPU2_DI1_PRE]);
+
+ /*
+ * The gpmi needs 100MHz frequency in the EDO/Sync mode,
+ * We can not get the 100MHz from the pll2_pfd0_352m.
+ * So choose pll2_pfd2_396m as enfc_sel's parent.
+ */
+ clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
+
+ if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);
+ }
+
+ /*
+ * Let's initially set up CLKO with OSC24M, since this configuration
+ * is widely used by imx6q board designs to clock audio codec.
+ */
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO2_SEL], clk[IMX6QDL_CLK_OSC]);
+ if (!ret)
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO], clk[IMX6QDL_CLK_CKO2]);
+ if (ret)
+ pr_warn("failed to set up CLKO: %d\n", ret);
+
+ /* Audio-related clocks configuration */
+ clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
+
+ /* All existing boards with PCIe use LVDS1 */
+ if (IS_ENABLED(CONFIG_PCI_IMX6))
+ clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
+}
+CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
--- /dev/null
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <dt-bindings/clock/imx6sl-clock.h>
+
+#include "clk.h"
+
+#define CCSR 0xc
+#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2)
+#define CACRR 0x10
+#define CDHIPR 0x48
+#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16)
+#define ARM_WAIT_DIV_396M 2
+#define ARM_WAIT_DIV_792M 4
+#define ARM_WAIT_DIV_996M 6
+
+#define PLL_ARM 0x0
+#define BM_PLL_ARM_DIV_SELECT (0x7f << 0)
+#define BM_PLL_ARM_POWERDOWN (1 << 12)
+#define BM_PLL_ARM_ENABLE (1 << 13)
+#define BM_PLL_ARM_LOCK (1 << 31)
+#define PLL_ARM_DIV_792M 66
+
+static const char *step_sels[] = { "osc", "pll2_pfd2", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", };
+static const char *ocram_sels[] = { "periph", "ocram_alt_sels", };
+static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
+static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", };
+static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", };
+static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
+static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", };
+static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", };
+static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
+static const char *perclk_sels[] = { "ipg", "osc", };
+static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", };
+static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", };
+static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
+static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
+static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
+static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
+static const char *ecspi_sels[] = { "pll3_60m", "osc", };
+static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *lvds_sels[] = {
+ "pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video",
+ "dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1",
+ "pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy",
+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
+};
+static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+
+static struct clk_div_table clk_enet_ref_table[] = {
+ { .val = 0, .div = 20, },
+ { .val = 1, .div = 10, },
+ { .val = 2, .div = 5, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static struct clk_div_table post_div_table[] = {
+ { .val = 2, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 0, .div = 4, },
+ { }
+};
+
+static struct clk_div_table video_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 1, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static unsigned int share_count_ssi1;
+static unsigned int share_count_ssi2;
+static unsigned int share_count_ssi3;
+
+static struct clk *clks[IMX6SL_CLK_END];
+static struct clk_onecell_data clk_data;
+static void __iomem *ccm_base;
+static void __iomem *anatop_base;
+
+static const u32 clks_init_on[] __initconst = {
+ IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
+};
+
+/*
+ * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
+ * during WAIT mode entry process could cause cache memory
+ * corruption.
+ *
+ * Software workaround:
+ * To prevent this issue from occurring, software should ensure that the
+ * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
+ * entering WAIT mode.
+ *
+ * This function will set the ARM clk to max value within the 12:5 limit.
+ * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz),
+ * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since
+ * the clk APIs can NOT be called in idle thread(may cause kernel schedule
+ * as there is sleep function in PLL wait function), so here we just slow
+ * down ARM to below freq according to previous freq:
+ *
+ * run mode wait mode
+ * 396MHz -> 132MHz;
+ * 792MHz -> 158.4MHz;
+ * 996MHz -> 142.3MHz;
+ */
+static int imx6sl_get_arm_divider_for_wait(void)
+{
+ if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) {
+ return ARM_WAIT_DIV_396M;
+ } else {
+ if ((readl_relaxed(anatop_base + PLL_ARM) &
+ BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M)
+ return ARM_WAIT_DIV_792M;
+ else
+ return ARM_WAIT_DIV_996M;
+ }
+}
+
+static void imx6sl_enable_pll_arm(bool enable)
+{
+ static u32 saved_pll_arm;
+ u32 val;
+
+ if (enable) {
+ saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM);
+ val |= BM_PLL_ARM_ENABLE;
+ val &= ~BM_PLL_ARM_POWERDOWN;
+ writel_relaxed(val, anatop_base + PLL_ARM);
+ while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
+ ;
+ } else {
+ writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);
+ }
+}
+
+void imx6sl_set_wait_clk(bool enter)
+{
+ static unsigned long saved_arm_div;
+ int arm_div_for_wait = imx6sl_get_arm_divider_for_wait();
+
+ /*
+ * According to hardware design, arm podf change need
+ * PLL1 clock enabled.
+ */
+ if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+ imx6sl_enable_pll_arm(true);
+
+ if (enter) {
+ saved_arm_div = readl_relaxed(ccm_base + CACRR);
+ writel_relaxed(arm_div_for_wait, ccm_base + CACRR);
+ } else {
+ writel_relaxed(saved_arm_div, ccm_base + CACRR);
+ }
+ while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY)
+ ;
+
+ if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+ imx6sl_enable_pll_arm(false);
+}
+
+static void __init imx6sl_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i;
+ int ret;
+
+ clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ /* Clock source from external clock via CLK1 PAD */
+ clks[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ anatop_base = base;
+
+ clks[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ /* type name parent_name base div_mask */
+ clks[IMX6SL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+ clks[IMX6SL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+ clks[IMX6SL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+ clks[IMX6SL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+ clks[IMX6SL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+ clks[IMX6SL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+ clks[IMX6SL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+ clks[IMX6SL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clks[IMX6SL_PLL1_BYPASS], clks[IMX6SL_CLK_PLL1]);
+ clk_set_parent(clks[IMX6SL_PLL2_BYPASS], clks[IMX6SL_CLK_PLL2]);
+ clk_set_parent(clks[IMX6SL_PLL3_BYPASS], clks[IMX6SL_CLK_PLL3]);
+ clk_set_parent(clks[IMX6SL_PLL4_BYPASS], clks[IMX6SL_CLK_PLL4]);
+ clk_set_parent(clks[IMX6SL_PLL5_BYPASS], clks[IMX6SL_CLK_PLL5]);
+ clk_set_parent(clks[IMX6SL_PLL6_BYPASS], clks[IMX6SL_CLK_PLL6]);
+ clk_set_parent(clks[IMX6SL_PLL7_BYPASS], clks[IMX6SL_CLK_PLL7]);
+
+ clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
+ clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
+ clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
+ clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
+
+ clks[IMX6SL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clks[IMX6SL_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
+ clks[IMX6SL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
+
+ /*
+ * usbphy1 and usbphy2 are implemented as dummy gates using reserve
+ * bit 20. They are used by phy driver to keep the refcount of
+ * parent PLL correct. usbphy1_gate and usbphy2_gate only needs to be
+ * turned on during boot, and software will not need to control it
+ * anymore after that.
+ */
+ clks[IMX6SL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clks[IMX6SL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+ clks[IMX6SL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clks[IMX6SL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+ /* dev name parent_name flags reg shift width div: flags, div_table lock */
+ clks[IMX6SL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clks[IMX6SL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+ clks[IMX6SL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
+
+ /* name parent_name reg idx */
+ clks[IMX6SL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0", "pll2_bus", base + 0x100, 0);
+ clks[IMX6SL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", base + 0x100, 1);
+ clks[IMX6SL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", base + 0x100, 2);
+ clks[IMX6SL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0", "pll3_usb_otg", base + 0xf0, 0);
+ clks[IMX6SL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", base + 0xf0, 1);
+ clks[IMX6SL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", base + 0xf0, 2);
+ clks[IMX6SL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clks[IMX6SL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2", 1, 2);
+ clks[IMX6SL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clks[IMX6SL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clks[IMX6SL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+
+ np = ccm_node;
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ ccm_base = base;
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clks[IMX6SL_CLK_OCRAM_ALT_SEL] = imx_clk_mux("ocram_alt_sel", base + 0x14, 7, 1, ocram_alt_sels, ARRAY_SIZE(ocram_alt_sels));
+ clks[IMX6SL_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 1, ocram_sels, ARRAY_SIZE(ocram_sels));
+ clks[IMX6SL_CLK_PRE_PERIPH2_SEL] = imx_clk_mux("pre_periph2_sel", base + 0x18, 21, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
+ clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels));
+ clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
+ clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels));
+ clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels));
+ clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels));
+ clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels));
+ clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels));
+ clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels));
+ clks[IMX6SL_CLK_EPDC_PIX_SEL] = imx_clk_mux("epdc_pix_sel", base + 0x38, 15, 3, epdc_pix_sels, ARRAY_SIZE(epdc_pix_sels));
+ clks[IMX6SL_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SL_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
+ clks[IMX6SL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clks[IMX6SL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clks[IMX6SL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+
+ /* name parent_name reg shift width */
+ clks[IMX6SL_CLK_OCRAM_PODF] = imx_clk_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3);
+ clks[IMX6SL_CLK_PERIPH_CLK2_PODF] = imx_clk_divider("periph_clk2_podf", "periph_clk2_sel", base + 0x14, 27, 3);
+ clks[IMX6SL_CLK_PERIPH2_CLK2_PODF] = imx_clk_divider("periph2_clk2_podf", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clks[IMX6SL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clks[IMX6SL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
+ clks[IMX6SL_CLK_LCDIF_AXI_PODF] = imx_clk_divider("lcdif_axi_podf", "lcdif_axi_sel", base + 0x3c, 16, 3);
+ clks[IMX6SL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clks[IMX6SL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clks[IMX6SL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clks[IMX6SL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clks[IMX6SL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clks[IMX6SL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clks[IMX6SL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clks[IMX6SL_CLK_PERCLK] = imx_clk_fixup_divider("perclk", "perclk_sel", base + 0x1c, 0, 6, imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3);
+ clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3);
+ clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3);
+ clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3);
+ clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3);
+ clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3);
+ clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3);
+ clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3);
+ clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3);
+ clks[IMX6SL_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", base + 0x30, 12, 3);
+ clks[IMX6SL_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", base + 0x30, 9, 3);
+ clks[IMX6SL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x28, 9, 3);
+ clks[IMX6SL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x28, 25, 3);
+ clks[IMX6SL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6);
+ clks[IMX6SL_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_sel", base + 0x24, 0, 6);
+
+ /* name parent_name reg shift width busy: reg, shift */
+ clks[IMX6SL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+ clks[IMX6SL_CLK_MMDC_ROOT] = imx_clk_busy_divider("mmdc", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clks[IMX6SL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+
+ /* name parent_name reg shift */
+ clks[IMX6SL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
+ clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
+ clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
+ clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
+ clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
+ clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
+ clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
+ clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16);
+ clks[IMX6SL_CLK_GPT] = imx_clk_gate2("gpt", "perclk", base + 0x6c, 20);
+ clks[IMX6SL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
+ clks[IMX6SL_CLK_GPU2D_OVG] = imx_clk_gate2("gpu2d_ovg", "gpu2d_ovg_podf", base + 0x6c, 26);
+ clks[IMX6SL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
+ clks[IMX6SL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
+ clks[IMX6SL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
+ clks[IMX6SL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
+ clks[IMX6SL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x74, 0);
+ clks[IMX6SL_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "pxp_axi_podf", base + 0x74, 2);
+ clks[IMX6SL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_axi", "epdc_axi_podf", base + 0x74, 4);
+ clks[IMX6SL_CLK_LCDIF_AXI] = imx_clk_gate2("lcdif_axi", "lcdif_axi_podf", base + 0x74, 6);
+ clks[IMX6SL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_pix_podf", base + 0x74, 8);
+ clks[IMX6SL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_pix_podf", base + 0x74, 10);
+ clks[IMX6SL_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
+ clks[IMX6SL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
+ clks[IMX6SL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
+ clks[IMX6SL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
+ clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
+ clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6);
+ clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14);
+ clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24);
+ clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26);
+ clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clks[IMX6SL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clks[IMX6SL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ /* Ensure the AHB clk is at 132MHz. */
+ ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
+ if (ret)
+ pr_warn("%s: failed to set AHB clock rate %d!\n",
+ __func__, ret);
+
+ /*
+ * Make sure those always on clocks are enabled to maintain the correct
+ * usecount and enabling/disabling of parent PLLs.
+ */
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+ clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
+ }
+
+ /* Audio-related clocks configuration */
+ clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
+
+ /* set PLL5 video as lcdif pix parent clock */
+ clk_set_parent(clks[IMX6SL_CLK_LCDIF_PIX_SEL],
+ clks[IMX6SL_CLK_PLL5_VIDEO_DIV]);
+
+ clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL],
+ clks[IMX6SL_CLK_PLL2_PFD2]);
+}
+CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
--- /dev/null
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/types.h>
+
+#include "clk.h"
+
+#define CCDR 0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16)
+
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
+static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", };
+static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", };
+static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
+static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
+static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
+static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *pcie_axi_sels[] = { "axi", "ahb", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", };
+static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *perclk_sels[] = { "ipg", "osc", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", };
+static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", };
+static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", };
+static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
+static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", };
+static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *ecspi_sels[] = { "pll3_60m", "osc", };
+static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
+static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", };
+static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", };
+static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *cko1_sels[] = {
+ "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
+ "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix",
+ "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div",
+};
+static const char *cko2_sels[] = {
+ "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck",
+ "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core",
+ "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core",
+ "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy",
+ "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial",
+ "spdif", "asrc", "dummy",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+ "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div",
+ "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2",
+};
+static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+
+static struct clk *clks[IMX6SX_CLK_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static int const clks_init_on[] __initconst = {
+ IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
+ IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
+ IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
+ IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
+ IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4,
+ IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG,
+ IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5,
+ IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG,
+ IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1,
+ IMX6SX_CLK_EPIT2,
+};
+
+static struct clk_div_table clk_enet_ref_table[] = {
+ { .val = 0, .div = 20, },
+ { .val = 1, .div = 10, },
+ { .val = 2, .div = 5, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static struct clk_div_table post_div_table[] = {
+ { .val = 2, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 0, .div = 4, },
+ { }
+};
+
+static struct clk_div_table video_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 1, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static u32 share_count_asrc;
+static u32 share_count_audio;
+static u32 share_count_esai;
+static u32 share_count_ssi1;
+static u32 share_count_ssi2;
+static u32 share_count_ssi3;
+
+static void __init imx6sx_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i;
+
+ clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+
+ clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
+ clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
+
+ /* ipp_di clock is external input */
+ clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
+ clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
+
+ /* Clock source from external clock via CLK1 PAD */
+ clks[IMX6SX_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clks[IMX6SX_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ /* type name parent_name base div_mask */
+ clks[IMX6SX_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f);
+ clks[IMX6SX_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1);
+ clks[IMX6SX_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3);
+ clks[IMX6SX_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f);
+ clks[IMX6SX_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f);
+ clks[IMX6SX_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3);
+ clks[IMX6SX_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3);
+
+ clks[IMX6SX_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clks[IMX6SX_PLL1_BYPASS], clks[IMX6SX_CLK_PLL1]);
+ clk_set_parent(clks[IMX6SX_PLL2_BYPASS], clks[IMX6SX_CLK_PLL2]);
+ clk_set_parent(clks[IMX6SX_PLL3_BYPASS], clks[IMX6SX_CLK_PLL3]);
+ clk_set_parent(clks[IMX6SX_PLL4_BYPASS], clks[IMX6SX_CLK_PLL4]);
+ clk_set_parent(clks[IMX6SX_PLL5_BYPASS], clks[IMX6SX_CLK_PLL5]);
+ clk_set_parent(clks[IMX6SX_PLL6_BYPASS], clks[IMX6SX_CLK_PLL6]);
+ clk_set_parent(clks[IMX6SX_PLL7_BYPASS], clks[IMX6SX_CLK_PLL7]);
+
+ clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13);
+ clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
+ clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
+ clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
+ clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
+ clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
+ clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
+
+ /*
+ * Bit 20 is the reserved and read-only bit, we do this only for:
+ * - Do nothing for usbphy clk_enable/disable
+ * - Keep refcount when do usbphy clk_enable/disable, in that case,
+ * the clk framework may need to enable/disable usbphy's parent
+ */
+ clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+ /*
+ * usbphy*_gate needs to be on after system boots up, and software
+ * never needs to control it anymore.
+ */
+ clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+ /* FIXME 100MHz is used for pcie ref for all imx6 pcie, excepted imx6q */
+ clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
+ clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+ clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12));
+ clks[IMX6SX_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10));
+
+ clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
+ base + 0xe0, 2, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
+
+ clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+ clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21);
+
+ /* name parent_name reg idx */
+ clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3);
+ clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+
+ clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
+ CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video",
+ CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ np = ccm_node;
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels));
+ clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+ clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels));
+ clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+ clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
+ clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels));
+ clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
+ clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels));
+ clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels));
+ clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels));
+ clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels));
+ clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
+ clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels));
+ clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels));
+ clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels));
+ clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
+ clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+
+ clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT);
+
+ /* name parent_name reg shift width */
+ clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3);
+ clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3);
+ clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3);
+ clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
+ clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
+ clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3);
+ clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
+ clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2);
+ clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
+ clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6);
+ clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3);
+ clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6);
+ clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3);
+ clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3);
+ clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3);
+ clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3);
+ clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6);
+ clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3);
+ clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3);
+ clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3);
+ clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
+ clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+
+ clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7);
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+ /* name parent_name reg shift width busy: reg, shift */
+ clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+ clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+
+ /* name parent_name reg shift */
+ /* CCGR0 */
+ clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
+ clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
+ clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8);
+ clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
+ clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
+ clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
+ clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
+ clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24);
+ clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26);
+ clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
+
+ /* CCGR1 */
+ clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
+ clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2);
+ clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4);
+ clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6);
+ clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8);
+ clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
+ clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
+ clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18);
+ clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20);
+ clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
+ clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26);
+ clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30);
+
+ /* CCGR2 */
+ clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
+ clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
+ clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
+ clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
+ clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
+ clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14);
+ clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16);
+ clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18);
+ clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20);
+ clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22);
+ clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28);
+ clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30);
+
+ /* CCGR3 */
+ clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2);
+ clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4);
+ clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4);
+ clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6);
+ clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8);
+ clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10);
+ clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12);
+ clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
+ clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18);
+ clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
+ clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24);
+ clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
+
+ /* CCGR4 */
+ clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0);
+ clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10);
+ clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14);
+ clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
+ clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
+ clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
+ clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
+ clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28);
+ clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+
+ /* CCGR5 */
+ clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SX_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
+ clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30);
+ clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30);
+
+ /* CCGR6 */
+ clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
+ clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16);
+ clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20);
+ clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22);
+ clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
+ clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26);
+ clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28);
+ clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30);
+
+ clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+
+ /* mask handshake of mmdc */
+ writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);
+ }
+
+ /* Set the default 132MHz for EIM module */
+ clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000);
+
+ /* set parent clock for LCDIF1 pixel clock */
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]);
+
+ /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
+ if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M]))
+ pr_err("Failed to set pcie bus parent clk.\n");
+ if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI]))
+ pr_err("Failed to set pcie parent clk.\n");
+
+ /*
+ * Init enet system AHB clock, set to 200MHz
+ * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+ */
+ clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000);
+
+ /* Audio clocks */
+ clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000);
+
+ clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+ clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000);
+
+ clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000);
+
+ /* Set parent clock for vadc */
+ clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+
+ /* default parent of can_sel clock is invalid, manually set it here */
+ clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]);
+
+ /* Update gpu clock from default 528M to 720M */
+ clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+ clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+
+ clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+ clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
+}
+CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/types.h>
+
+#include "clk.h"
+
+static struct clk *clks[IMX7D_CLK_END];
+static const char *arm_a7_sel[] = { "osc", "pll_arm_main_clk",
+ "pll_enet_500m_clk", "pll_dram_main_clk",
+ "pll_sys_main_clk", "pll_sys_pfd0_392m_clk", "pll_audio_main_clk",
+ "pll_usb_main_clk", };
+
+static const char *arm_m4_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_250m_clk", "pll_sys_pfd2_270m_clk",
+ "pll_dram_533m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "pll_usb_main_clk", };
+
+static const char *arm_m0_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_enet_125m_clk", "pll_sys_pfd2_135m_clk",
+ "pll_dram_533m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "pll_usb_main_clk", };
+
+static const char *axi_sel[] = { "osc", "pll_sys_pfd1_332m_clk",
+ "pll_dram_533m_clk", "pll_enet_250m_clk", "pll_sys_pfd5_clk",
+ "pll_audio_main_clk", "pll_video_main_clk", "pll_sys_pfd7_clk", };
+
+static const char *disp_axi_sel[] = { "osc", "pll_sys_pfd1_332m_clk",
+ "pll_dram_533m_clk", "pll_enet_250m_clk", "pll_sys_pfd6_clk",
+ "pll_sys_pfd7_clk", "pll_audio_main_clk", "pll_video_main_clk", };
+
+static const char *enet_axi_sel[] = { "osc", "pll_sys_pfd2_270m_clk",
+ "pll_dram_533m_clk", "pll_enet_250m_clk",
+ "pll_sys_main_240m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "pll_sys_pfd4_clk", };
+
+static const char *nand_usdhc_bus_sel[] = { "osc", "pll_sys_pfd2_270m_clk",
+ "pll_dram_533m_clk", "pll_sys_main_240m_clk",
+ "pll_sys_pfd2_135m_clk", "pll_sys_pfd6_clk", "pll_enet_250m_clk",
+ "pll_audio_main_clk", };
+
+static const char *ahb_channel_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_dram_533m_clk", "pll_sys_pfd0_392m_clk",
+ "pll_enet_125m_clk", "pll_usb_main_clk", "pll_audio_main_clk",
+ "pll_video_main_clk", };
+
+static const char *dram_phym_sel[] = { "pll_dram_main_clk",
+ "dram_phym_alt_clk", };
+
+static const char *dram_sel[] = { "pll_dram_main_clk",
+ "dram_alt_clk", };
+
+static const char *dram_phym_alt_sel[] = { "osc", "pll_dram_533m_clk",
+ "pll_sys_main_clk", "pll_enet_500m_clk",
+ "pll_usb_main_clk", "pll_sys_pfd7_clk", "pll_audio_main_clk",
+ "pll_video_main_clk", };
+
+static const char *dram_alt_sel[] = { "osc", "pll_dram_533m_clk",
+ "pll_sys_main_clk", "pll_enet_500m_clk",
+ "pll_enet_250m_clk", "pll_sys_pfd0_392m_clk",
+ "pll_audio_main_clk", "pll_sys_pfd2_270m_clk", };
+
+static const char *usb_hsic_sel[] = { "osc", "pll_sys_main_clk",
+ "pll_usb_main_clk", "pll_sys_pfd3_clk", "pll_sys_pfd4_clk",
+ "pll_sys_pfd5_clk", "pll_sys_pfd6_clk", "pll_sys_pfd7_clk", };
+
+static const char *pcie_ctrl_sel[] = { "osc", "pll_enet_250m_clk",
+ "pll_sys_main_240m_clk", "pll_sys_pfd2_270m_clk",
+ "pll_dram_533m_clk", "pll_enet_500m_clk",
+ "pll_sys_pfd1_332m_clk", "pll_sys_pfd6_clk", };
+
+static const char *pcie_phy_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_enet_500m_clk", "ext_clk_1", "ext_clk_2", "ext_clk_3",
+ "ext_clk_4", "pll_sys_pfd0_392m_clk", };
+
+static const char *epdc_pixel_sel[] = { "osc", "pll_sys_pfd1_332m_clk",
+ "pll_dram_533m_clk", "pll_sys_main_clk", "pll_sys_pfd5_clk",
+ "pll_sys_pfd6_clk", "pll_sys_pfd7_clk", "pll_video_main_clk", };
+
+static const char *lcdif_pixel_sel[] = { "osc", "pll_sys_pfd5_clk",
+ "pll_dram_533m_clk", "ext_clk_3", "pll_sys_pfd4_clk",
+ "pll_sys_pfd2_270m_clk", "pll_video_main_clk",
+ "pll_usb_main_clk", };
+
+static const char *mipi_dsi_sel[] = { "osc", "pll_sys_pfd5_clk",
+ "pll_sys_pfd3_clk", "pll_sys_main_clk", "pll_sys_pfd0_196m_clk",
+ "pll_dram_533m_clk", "pll_video_main_clk", "pll_audio_main_clk", };
+
+static const char *mipi_csi_sel[] = { "osc", "pll_sys_pfd4_clk",
+ "pll_sys_pfd3_clk", "pll_sys_main_clk", "pll_sys_pfd0_196m_clk",
+ "pll_dram_533m_clk", "pll_video_main_clk", "pll_audio_main_clk", };
+
+static const char *mipi_dphy_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_dram_533m_clk", "pll_sys_pfd5_clk", "ref_1m_clk", "ext_clk_2",
+ "pll_video_main_clk", "ext_clk_3", };
+
+static const char *sai1_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_audio_main_clk", "pll_dram_533m_clk", "pll_video_main_clk",
+ "pll_sys_pfd4_clk", "pll_enet_125m_clk", "ext_clk_2", };
+
+static const char *sai2_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_audio_main_clk", "pll_dram_533m_clk", "pll_video_main_clk",
+ "pll_sys_pfd4_clk", "pll_enet_125m_clk", "ext_clk_2", };
+
+static const char *sai3_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_audio_main_clk", "pll_dram_533m_clk", "pll_video_main_clk",
+ "pll_sys_pfd4_clk", "pll_enet_125m_clk", "ext_clk_3", };
+
+static const char *spdif_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_audio_main_clk", "pll_dram_533m_clk", "pll_video_main_clk",
+ "pll_sys_pfd4_clk", "pll_enet_125m_clk", "ext_3_clk", };
+
+static const char *enet1_ref_sel[] = { "osc", "pll_enet_125m_clk",
+ "pll_enet_50m_clk", "pll_enet_25m_clk",
+ "pll_sys_main_120m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "ext_clk_4", };
+
+static const char *enet1_time_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_audio_main_clk", "ext_clk_1", "ext_clk_2", "ext_clk_3",
+ "ext_clk_4", "pll_video_main_clk", };
+
+static const char *enet2_ref_sel[] = { "osc", "pll_enet_125m_clk",
+ "pll_enet_50m_clk", "pll_enet_25m_clk",
+ "pll_sys_main_120m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "ext_clk_4", };
+
+static const char *enet2_time_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_audio_main_clk", "ext_clk_1", "ext_clk_2", "ext_clk_3",
+ "ext_clk_4", "pll_video_main_clk", };
+
+static const char *enet_phy_ref_sel[] = { "osc", "pll_enet_25m_clk",
+ "pll_enet_50m_clk", "pll_enet_125m_clk",
+ "pll_dram_533m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "pll_sys_pfd3_clk", };
+
+static const char *eim_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_sys_main_120m_clk", "pll_dram_533m_clk",
+ "pll_sys_pfd2_270m_clk", "pll_sys_pfd3_clk", "pll_enet_125m_clk",
+ "pll_usb_main_clk", };
+
+static const char *nand_sel[] = { "osc", "pll_sys_main_clk",
+ "pll_dram_533m_clk", "pll_sys_pfd0_392m_clk", "pll_sys_pfd3_clk",
+ "pll_enet_500m_clk", "pll_enet_250m_clk",
+ "pll_video_main_clk", };
+
+static const char *qspi_sel[] = { "osc", "pll_sys_pfd4_clk",
+ "pll_dram_533m_clk", "pll_enet_500m_clk", "pll_sys_pfd3_clk",
+ "pll_sys_pfd2_270m_clk", "pll_sys_pfd6_clk", "pll_sys_pfd7_clk", };
+
+static const char *usdhc1_sel[] = { "osc", "pll_sys_pfd0_392m_clk",
+ "pll_dram_533m_clk", "pll_enet_500m_clk", "pll_sys_pfd4_clk",
+ "pll_sys_pfd2_270m_clk", "pll_sys_pfd6_clk", "pll_sys_pfd7_clk", };
+
+static const char *usdhc2_sel[] = { "osc", "pll_sys_pfd0_392m_clk",
+ "pll_dram_533m_clk", "pll_enet_500m_clk", "pll_sys_pfd4_clk",
+ "pll_sys_pfd2_270m_clk", "pll_sys_pfd6_clk", "pll_sys_pfd7_clk", };
+
+static const char *usdhc3_sel[] = { "osc", "pll_sys_pfd0_392m_clk",
+ "pll_dram_533m_clk", "pll_enet_500m_clk", "pll_sys_pfd4_clk",
+ "pll_sys_pfd2_270m_clk", "pll_sys_pfd6_clk", "pll_sys_pfd7_clk", };
+
+static const char *can1_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_dram_533m_clk", "pll_sys_main_clk",
+ "pll_enet_40m_clk", "pll_usb_main_clk", "ext_clk_1",
+ "ext_clk_4", };
+
+static const char *can2_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_dram_533m_clk", "pll_sys_main_clk",
+ "pll_enet_40m_clk", "pll_usb_main_clk", "ext_clk_1",
+ "ext_clk_3", };
+
+static const char *i2c1_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_enet_50m_clk", "pll_dram_533m_clk",
+ "pll_audio_main_clk", "pll_video_main_clk", "pll_usb_main_clk",
+ "pll_sys_pfd2_135m_clk", };
+
+static const char *i2c2_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_enet_50m_clk", "pll_dram_533m_clk",
+ "pll_audio_main_clk", "pll_video_main_clk", "pll_usb_main_clk",
+ "pll_sys_pfd2_135m_clk", };
+
+static const char *i2c3_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_enet_50m_clk", "pll_dram_533m_clk",
+ "pll_audio_main_clk", "pll_video_main_clk", "pll_usb_main_clk",
+ "pll_sys_pfd2_135m_clk", };
+
+static const char *i2c4_sel[] = { "osc", "pll_sys_main_120m_clk",
+ "pll_enet_50m_clk", "pll_dram_533m_clk",
+ "pll_audio_main_clk", "pll_video_main_clk", "pll_usb_main_clk",
+ "pll_sys_pfd2_135m_clk", };
+
+static const char *uart1_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_enet_100m_clk",
+ "pll_sys_main_clk", "ext_clk_2", "ext_clk_4",
+ "pll_usb_main_clk", };
+
+static const char *uart2_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_enet_100m_clk",
+ "pll_sys_main_clk", "ext_clk_2", "ext_clk_3",
+ "pll_usb_main_clk", };
+
+static const char *uart3_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_enet_100m_clk",
+ "pll_sys_main_clk", "ext_clk_2", "ext_clk_4",
+ "pll_usb_main_clk", };
+
+static const char *uart4_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_enet_100m_clk",
+ "pll_sys_main_clk", "ext_clk_2", "ext_clk_3",
+ "pll_usb_main_clk", };
+
+static const char *uart5_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_enet_100m_clk",
+ "pll_sys_main_clk", "ext_clk_2", "ext_clk_4",
+ "pll_usb_main_clk", };
+
+static const char *uart6_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_enet_100m_clk",
+ "pll_sys_main_clk", "ext_clk_2", "ext_clk_3",
+ "pll_usb_main_clk", };
+
+static const char *uart7_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_enet_100m_clk",
+ "pll_sys_main_clk", "ext_clk_2", "ext_clk_4",
+ "pll_usb_main_clk", };
+
+static const char *ecspi1_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_sys_main_120m_clk",
+ "pll_sys_main_clk", "pll_sys_pfd4_clk", "pll_enet_250m_clk",
+ "pll_usb_main_clk", };
+
+static const char *ecspi2_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_sys_main_120m_clk",
+ "pll_sys_main_clk", "pll_sys_pfd4_clk", "pll_enet_250m_clk",
+ "pll_usb_main_clk", };
+
+static const char *ecspi3_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_sys_main_120m_clk",
+ "pll_sys_main_clk", "pll_sys_pfd4_clk", "pll_enet_250m_clk",
+ "pll_usb_main_clk", };
+
+static const char *ecspi4_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_enet_40m_clk", "pll_sys_main_120m_clk",
+ "pll_sys_main_clk", "pll_sys_pfd4_clk", "pll_enet_250m_clk",
+ "pll_usb_main_clk", };
+
+static const char *pwm1_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_main_120m_clk", "pll_enet_40m_clk", "pll_audio_main_clk",
+ "ext_clk_1", "ref_1m_clk", "pll_video_main_clk", };
+
+static const char *pwm2_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_main_120m_clk", "pll_enet_40m_clk", "pll_audio_main_clk",
+ "ext_clk_1", "ref_1m_clk", "pll_video_main_clk", };
+
+static const char *pwm3_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_main_120m_clk", "pll_enet_40m_clk", "pll_audio_main_clk",
+ "ext_clk_2", "ref_1m_clk", "pll_video_main_clk", };
+
+static const char *pwm4_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_main_120m_clk", "pll_enet_40m_clk", "pll_audio_main_clk",
+ "ext_clk_2", "ref_1m_clk", "pll_video_main_clk", };
+
+static const char *flextimer1_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_main_120m_clk", "pll_enet_40m_clk", "pll_audio_main_clk",
+ "ext_clk_3", "ref_1m_clk", "pll_video_main_clk", };
+
+static const char *flextimer2_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_main_120m_clk", "pll_enet_40m_clk", "pll_audio_main_clk",
+ "ext_clk_3", "ref_1m_clk", "pll_video_main_clk", };
+
+static const char *sim1_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_sys_main_120m_clk", "pll_dram_533m_clk",
+ "pll_usb_main_clk", "pll_audio_main_clk", "pll_enet_125m_clk",
+ "pll_sys_pfd7_clk", };
+
+static const char *sim2_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_sys_main_120m_clk", "pll_dram_533m_clk",
+ "pll_usb_main_clk", "pll_video_main_clk", "pll_enet_125m_clk",
+ "pll_sys_pfd7_clk", };
+
+static const char *gpt1_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_pfd0_392m_clk", "pll_enet_40m_clk", "pll_video_main_clk",
+ "ref_1m_clk", "pll_audio_main_clk", "ext_clk_1", };
+
+static const char *gpt2_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_pfd0_392m_clk", "pll_enet_40m_clk", "pll_video_main_clk",
+ "ref_1m_clk", "pll_audio_main_clk", "ext_clk_2", };
+
+static const char *gpt3_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_pfd0_392m_clk", "pll_enet_40m_clk", "pll_video_main_clk",
+ "ref_1m_clk", "pll_audio_main_clk", "ext_clk_3", };
+
+static const char *gpt4_sel[] = { "osc", "pll_enet_100m_clk",
+ "pll_sys_pfd0_392m_clk", "pll_enet_40m_clk", "pll_video_main_clk",
+ "ref_1m_clk", "pll_audio_main_clk", "ext_clk_4", };
+
+static const char *trace_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_sys_main_120m_clk", "pll_dram_533m_clk",
+ "pll_enet_125m_clk", "pll_usb_main_clk", "ext_clk_2",
+ "ext_clk_3", };
+
+static const char *wdog_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_sys_main_120m_clk", "pll_dram_533m_clk",
+ "pll_enet_125m_clk", "pll_usb_main_clk", "ref_1m_clk",
+ "pll_sys_pfd1_166m_clk", };
+
+static const char *csi_mclk_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_sys_main_120m_clk", "pll_dram_533m_clk",
+ "pll_enet_125m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "pll_usb_main_clk", };
+
+static const char *audio_mclk_sel[] = { "osc", "pll_sys_pfd2_135m_clk",
+ "pll_sys_main_120m_clk", "pll_dram_533m_clk",
+ "pll_enet_125m_clk", "pll_audio_main_clk", "pll_video_main_clk",
+ "pll_usb_main_clk", };
+
+static const char *wrclk_sel[] = { "osc", "pll_enet_40m_clk",
+ "pll_dram_533m_clk", "pll_usb_main_clk",
+ "pll_sys_main_240m_clk", "pll_sys_pfd2_270m_clk",
+ "pll_enet_500m_clk", "pll_sys_pfd7_clk", };
+
+static const char *clko1_sel[] = { "osc", "pll_sys_main_clk",
+ "pll_sys_main_240m_clk", "pll_sys_pfd0_196m_clk", "pll_sys_pfd3_clk",
+ "pll_enet_500m_clk", "pll_dram_533m_clk", "ref_1m_clk", };
+
+static const char *clko2_sel[] = { "osc", "pll_sys_main_240m_clk",
+ "pll_sys_pfd0_392m_clk", "pll_sys_pfd1_166m_clk", "pll_sys_pfd4_clk",
+ "pll_audio_main_clk", "pll_video_main_clk", "osc_32k_clk", };
+
+static const char *lvds1_sel[] = { "pll_arm_main_clk",
+ "pll_sys_main_clk", "pll_sys_pfd0_392m_clk", "pll_sys_pfd1_332m_clk",
+ "pll_sys_pfd2_270m_clk", "pll_sys_pfd3_clk", "pll_sys_pfd4_clk",
+ "pll_sys_pfd5_clk", "pll_sys_pfd6_clk", "pll_sys_pfd7_clk",
+ "pll_audio_main_clk", "pll_video_main_clk", "pll_enet_500m_clk",
+ "pll_enet_250m_clk", "pll_enet_125m_clk", "pll_enet_100m_clk",
+ "pll_enet_50m_clk", "pll_enet_40m_clk", "pll_enet_25m_clk",
+ "pll_dram_main_clk", };
+
+static const char *pll_bypass_src_sel[] = { "osc", "dummy", };
+static const char *pll_arm_bypass_sel[] = { "pll_arm_main", "pll_arm_main_src", };
+static const char *pll_dram_bypass_sel[] = { "pll_dram_main", "pll_dram_main_src", };
+static const char *pll_sys_bypass_sel[] = { "pll_sys_main", "pll_sys_main_src", };
+static const char *pll_enet_bypass_sel[] = { "pll_enet_main", "pll_enet_main_src", };
+static const char *pll_audio_bypass_sel[] = { "pll_audio_main", "pll_audio_main_src", };
+static const char *pll_video_bypass_sel[] = { "pll_video_main", "pll_video_main_src", };
+
+static struct clk_onecell_data clk_data;
+
+static void __init imx7d_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i;
+
+ clks[IMX7D_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clks[IMX7D_OSC_24M_CLK] = of_clk_get_by_name(ccm_node, "osc");
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ clks[IMX7D_PLL_ARM_MAIN_SRC] = imx_clk_mux("pll_arm_main_src", base + 0x60, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
+ clks[IMX7D_PLL_DRAM_MAIN_SRC] = imx_clk_mux("pll_dram_main_src", base + 0x70, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
+ clks[IMX7D_PLL_SYS_MAIN_SRC] = imx_clk_mux("pll_sys_main_src", base + 0xb0, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
+ clks[IMX7D_PLL_ENET_MAIN_SRC] = imx_clk_mux("pll_enet_main_src", base + 0xe0, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
+ clks[IMX7D_PLL_AUDIO_MAIN_SRC] = imx_clk_mux("pll_audio_main_src", base + 0xf0, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
+ clks[IMX7D_PLL_VIDEO_MAIN_SRC] = imx_clk_mux("pll_video_main_src", base + 0x130, 14, 2, pll_bypass_src_sel, ARRAY_SIZE(pll_bypass_src_sel));
+
+ clks[IMX7D_PLL_ARM_MAIN] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll_arm_main", "pll_arm_main_src", base + 0x60, 0x7f);
+ clks[IMX7D_PLL_DRAM_MAIN] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll_dram_main", "pll_dram_main_src", base + 0x70, 0x7f);
+ clks[IMX7D_PLL_SYS_MAIN] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll_sys_main", "pll_sys_main_src", base + 0xb0, 0x1);
+ clks[IMX7D_PLL_ENET_MAIN] = imx_clk_pllv3(IMX_PLLV3_ENET_IMX7, "pll_enet_main", "pll_enet_main_src", base + 0xe0, 0x0);
+ clks[IMX7D_PLL_AUDIO_MAIN] = imx_clk_pllv3(IMX_PLLV3_AV, "pll_audio_main", "pll_audio_main_src", base + 0xf0, 0x7f);
+ clks[IMX7D_PLL_VIDEO_MAIN] = imx_clk_pllv3(IMX_PLLV3_AV, "pll_video_main", "pll_video_main_src", base + 0x130, 0x7f);
+
+ clks[IMX7D_PLL_ARM_MAIN_BYPASS] = imx_clk_mux_flags("pll_arm_main_bypass", base + 0x60, 16, 1, pll_arm_bypass_sel, ARRAY_SIZE(pll_arm_bypass_sel), CLK_SET_RATE_PARENT);
+ clks[IMX7D_PLL_DRAM_MAIN_BYPASS] = imx_clk_mux_flags("pll_dram_main_bypass", base + 0x70, 16, 1, pll_dram_bypass_sel, ARRAY_SIZE(pll_dram_bypass_sel), CLK_SET_RATE_PARENT);
+ clks[IMX7D_PLL_SYS_MAIN_BYPASS] = imx_clk_mux_flags("pll_sys_main_bypass", base + 0xb0, 16, 1, pll_sys_bypass_sel, ARRAY_SIZE(pll_sys_bypass_sel), CLK_SET_RATE_PARENT);
+ clks[IMX7D_PLL_ENET_MAIN_BYPASS] = imx_clk_mux_flags("pll_enet_main_bypass", base + 0xe0, 16, 1, pll_enet_bypass_sel, ARRAY_SIZE(pll_enet_bypass_sel), CLK_SET_RATE_PARENT);
+ clks[IMX7D_PLL_AUDIO_MAIN_BYPASS] = imx_clk_mux_flags("pll_audio_main_bypass", base + 0xf0, 16, 1, pll_audio_bypass_sel, ARRAY_SIZE(pll_audio_bypass_sel), CLK_SET_RATE_PARENT);
+ clks[IMX7D_PLL_VIDEO_MAIN_BYPASS] = imx_clk_mux_flags("pll_video_main_bypass", base + 0x130, 16, 1, pll_video_bypass_sel, ARRAY_SIZE(pll_video_bypass_sel), CLK_SET_RATE_PARENT);
+
+ clk_set_parent(clks[IMX7D_PLL_ARM_MAIN_BYPASS], clks[IMX7D_PLL_ARM_MAIN]);
+ clk_set_parent(clks[IMX7D_PLL_DRAM_MAIN_BYPASS], clks[IMX7D_PLL_DRAM_MAIN]);
+ clk_set_parent(clks[IMX7D_PLL_SYS_MAIN_BYPASS], clks[IMX7D_PLL_SYS_MAIN]);
+ clk_set_parent(clks[IMX7D_PLL_ENET_MAIN_BYPASS], clks[IMX7D_PLL_ENET_MAIN]);
+ clk_set_parent(clks[IMX7D_PLL_AUDIO_MAIN_BYPASS], clks[IMX7D_PLL_AUDIO_MAIN]);
+ clk_set_parent(clks[IMX7D_PLL_VIDEO_MAIN_BYPASS], clks[IMX7D_PLL_VIDEO_MAIN]);
+
+ clks[IMX7D_PLL_ARM_MAIN_CLK] = imx_clk_gate("pll_arm_main_clk", "pll_arm_main_bypass", base + 0x60, 13);
+ clks[IMX7D_PLL_DRAM_MAIN_CLK] = imx_clk_gate("pll_dram_main_clk", "pll_dram_main_bypass", base + 0x70, 13);
+ clks[IMX7D_PLL_SYS_MAIN_CLK] = imx_clk_gate("pll_sys_main_clk", "pll_sys_main_bypass", base + 0xb0, 13);
+ clks[IMX7D_PLL_AUDIO_MAIN_CLK] = imx_clk_gate("pll_audio_main_clk", "pll_audio_main_bypass", base + 0xf0, 13);
+ clks[IMX7D_PLL_VIDEO_MAIN_CLK] = imx_clk_gate("pll_video_main_clk", "pll_video_main_bypass", base + 0x130, 13);
+
+ clks[IMX7D_PLL_SYS_PFD0_392M_CLK] = imx_clk_pfd("pll_sys_pfd0_392m_clk", "pll_sys_main_clk", base + 0xc0, 0);
+ clks[IMX7D_PLL_SYS_PFD1_332M_CLK] = imx_clk_pfd("pll_sys_pfd1_332m_clk", "pll_sys_main_clk", base + 0xc0, 1);
+ clks[IMX7D_PLL_SYS_PFD2_270M_CLK] = imx_clk_pfd("pll_sys_pfd2_270m_clk", "pll_sys_main_clk", base + 0xc0, 2);
+
+ clks[IMX7D_PLL_SYS_PFD3_CLK] = imx_clk_pfd("pll_sys_pfd3_clk", "pll_sys_main_clk", base + 0xc0, 3);
+ clks[IMX7D_PLL_SYS_PFD4_CLK] = imx_clk_pfd("pll_sys_pfd4_clk", "pll_sys_main_clk", base + 0xd0, 0);
+ clks[IMX7D_PLL_SYS_PFD5_CLK] = imx_clk_pfd("pll_sys_pfd5_clk", "pll_sys_main_clk", base + 0xd0, 1);
+ clks[IMX7D_PLL_SYS_PFD6_CLK] = imx_clk_pfd("pll_sys_pfd6_clk", "pll_sys_main_clk", base + 0xd0, 2);
+ clks[IMX7D_PLL_SYS_PFD7_CLK] = imx_clk_pfd("pll_sys_pfd7_clk", "pll_sys_main_clk", base + 0xd0, 3);
+
+ clks[IMX7D_PLL_SYS_MAIN_480M] = imx_clk_fixed_factor("pll_sys_main_480m", "pll_sys_main_clk", 1, 1);
+ clks[IMX7D_PLL_SYS_MAIN_240M] = imx_clk_fixed_factor("pll_sys_main_240m", "pll_sys_main_clk", 1, 2);
+ clks[IMX7D_PLL_SYS_MAIN_120M] = imx_clk_fixed_factor("pll_sys_main_120m", "pll_sys_main_clk", 1, 4);
+ clks[IMX7D_PLL_DRAM_MAIN_533M] = imx_clk_fixed_factor("pll_dram_533m", "pll_dram_main_clk", 1, 2);
+
+ clks[IMX7D_PLL_SYS_MAIN_480M_CLK] = imx_clk_gate_dis("pll_sys_main_480m_clk", "pll_sys_main_480m", base + 0xb0, 4);
+ clks[IMX7D_PLL_SYS_MAIN_240M_CLK] = imx_clk_gate_dis("pll_sys_main_240m_clk", "pll_sys_main_240m", base + 0xb0, 5);
+ clks[IMX7D_PLL_SYS_MAIN_120M_CLK] = imx_clk_gate_dis("pll_sys_main_120m_clk", "pll_sys_main_120m", base + 0xb0, 6);
+ clks[IMX7D_PLL_DRAM_MAIN_533M_CLK] = imx_clk_gate("pll_dram_533m_clk", "pll_dram_533m", base + 0x70, 12);
+
+ clks[IMX7D_PLL_SYS_PFD0_196M] = imx_clk_fixed_factor("pll_sys_pfd0_196m", "pll_sys_pfd0_392m_clk", 1, 2);
+ clks[IMX7D_PLL_SYS_PFD1_166M] = imx_clk_fixed_factor("pll_sys_pfd1_166m", "pll_sys_pfd1_332m_clk", 1, 2);
+ clks[IMX7D_PLL_SYS_PFD2_135M] = imx_clk_fixed_factor("pll_sys_pfd2_135m", "pll_sys_pfd2_270m_clk", 1, 2);
+
+ clks[IMX7D_PLL_SYS_PFD0_196M_CLK] = imx_clk_gate_dis("pll_sys_pfd0_196m_clk", "pll_sys_pfd0_196m", base + 0xb0, 26);
+ clks[IMX7D_PLL_SYS_PFD1_166M_CLK] = imx_clk_gate_dis("pll_sys_pfd1_166m_clk", "pll_sys_pfd1_166m", base + 0xb0, 27);
+ clks[IMX7D_PLL_SYS_PFD2_135M_CLK] = imx_clk_gate_dis("pll_sys_pfd2_135m_clk", "pll_sys_pfd2_135m", base + 0xb0, 28);
+
+ clks[IMX7D_PLL_ENET_MAIN_CLK] = imx_clk_fixed_factor("pll_enet_main_clk", "pll_enet_main_bypass", 1, 1);
+ clks[IMX7D_PLL_ENET_MAIN_500M] = imx_clk_fixed_factor("pll_enet_500m", "pll_enet_main_clk", 1, 2);
+ clks[IMX7D_PLL_ENET_MAIN_250M] = imx_clk_fixed_factor("pll_enet_250m", "pll_enet_main_clk", 1, 4);
+ clks[IMX7D_PLL_ENET_MAIN_125M] = imx_clk_fixed_factor("pll_enet_125m", "pll_enet_main_clk", 1, 8);
+ clks[IMX7D_PLL_ENET_MAIN_100M] = imx_clk_fixed_factor("pll_enet_100m", "pll_enet_main_clk", 1, 10);
+ clks[IMX7D_PLL_ENET_MAIN_50M] = imx_clk_fixed_factor("pll_enet_50m", "pll_enet_main_clk", 1, 20);
+ clks[IMX7D_PLL_ENET_MAIN_40M] = imx_clk_fixed_factor("pll_enet_40m", "pll_enet_main_clk", 1, 25);
+ clks[IMX7D_PLL_ENET_MAIN_25M] = imx_clk_fixed_factor("pll_enet_25m", "pll_enet_main_clk", 1, 40);
+
+ clks[IMX7D_PLL_ENET_MAIN_500M_CLK] = imx_clk_gate("pll_enet_500m_clk", "pll_enet_500m", base + 0xe0, 12);
+ clks[IMX7D_PLL_ENET_MAIN_250M_CLK] = imx_clk_gate("pll_enet_250m_clk", "pll_enet_250m", base + 0xe0, 11);
+ clks[IMX7D_PLL_ENET_MAIN_125M_CLK] = imx_clk_gate("pll_enet_125m_clk", "pll_enet_125m", base + 0xe0, 10);
+ clks[IMX7D_PLL_ENET_MAIN_100M_CLK] = imx_clk_gate("pll_enet_100m_clk", "pll_enet_100m", base + 0xe0, 9);
+ clks[IMX7D_PLL_ENET_MAIN_50M_CLK] = imx_clk_gate("pll_enet_50m_clk", "pll_enet_50m", base + 0xe0, 8);
+ clks[IMX7D_PLL_ENET_MAIN_40M_CLK] = imx_clk_gate("pll_enet_40m_clk", "pll_enet_40m", base + 0xe0, 7);
+ clks[IMX7D_PLL_ENET_MAIN_25M_CLK] = imx_clk_gate("pll_enet_25m_clk", "pll_enet_25m", base + 0xe0, 6);
+
+ clks[IMX7D_LVDS1_OUT_SEL] = imx_clk_mux("lvds1_sel", base + 0x170, 0, 5, lvds1_sel, ARRAY_SIZE(lvds1_sel));
+ clks[IMX7D_LVDS1_OUT_CLK] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x170, 5, BIT(6));
+
+ np = ccm_node;
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ clks[IMX7D_ARM_A7_ROOT_SRC] = imx_clk_mux("arm_a7_src", base + 0x8000, 24, 3, arm_a7_sel, ARRAY_SIZE(arm_a7_sel));
+ clks[IMX7D_ARM_M4_ROOT_SRC] = imx_clk_mux("arm_m4_src", base + 0x8080, 24, 3, arm_m4_sel, ARRAY_SIZE(arm_m4_sel));
+ clks[IMX7D_ARM_M0_ROOT_SRC] = imx_clk_mux("arm_m0_src", base + 0x8100, 24, 3, arm_m0_sel, ARRAY_SIZE(arm_m0_sel));
+ clks[IMX7D_MAIN_AXI_ROOT_SRC] = imx_clk_mux("axi_src", base + 0x8800, 24, 3, axi_sel, ARRAY_SIZE(axi_sel));
+ clks[IMX7D_DISP_AXI_ROOT_SRC] = imx_clk_mux("disp_axi_src", base + 0x8880, 24, 3, disp_axi_sel, ARRAY_SIZE(disp_axi_sel));
+ clks[IMX7D_ENET_AXI_ROOT_SRC] = imx_clk_mux("enet_axi_src", base + 0x8900, 24, 3, enet_axi_sel, ARRAY_SIZE(enet_axi_sel));
+ clks[IMX7D_NAND_USDHC_BUS_ROOT_SRC] = imx_clk_mux("nand_usdhc_src", base + 0x8980, 24, 3, nand_usdhc_bus_sel, ARRAY_SIZE(nand_usdhc_bus_sel));
+ clks[IMX7D_AHB_CHANNEL_ROOT_SRC] = imx_clk_mux("ahb_src", base + 0x9000, 24, 3, ahb_channel_sel, ARRAY_SIZE(ahb_channel_sel));
+ clks[IMX7D_DRAM_PHYM_ROOT_SRC] = imx_clk_mux("dram_phym_src", base + 0x9800, 24, 1, dram_phym_sel, ARRAY_SIZE(dram_phym_sel));
+ clks[IMX7D_DRAM_ROOT_SRC] = imx_clk_mux("dram_src", base + 0x9880, 24, 1, dram_sel, ARRAY_SIZE(dram_sel));
+ clks[IMX7D_DRAM_PHYM_ALT_ROOT_SRC] = imx_clk_mux("dram_phym_alt_src", base + 0xa000, 24, 3, dram_phym_alt_sel, ARRAY_SIZE(dram_phym_alt_sel));
+ clks[IMX7D_DRAM_ALT_ROOT_SRC] = imx_clk_mux("dram_alt_src", base + 0xa080, 24, 3, dram_alt_sel, ARRAY_SIZE(dram_alt_sel));
+ clks[IMX7D_USB_HSIC_ROOT_SRC] = imx_clk_mux("usb_hsic_src", base + 0xa100, 24, 3, usb_hsic_sel, ARRAY_SIZE(usb_hsic_sel));
+ clks[IMX7D_PCIE_CTRL_ROOT_SRC] = imx_clk_mux("pcie_ctrl_src", base + 0xa180, 24, 3, pcie_ctrl_sel, ARRAY_SIZE(pcie_ctrl_sel));
+ clks[IMX7D_PCIE_PHY_ROOT_SRC] = imx_clk_mux("pcie_phy_src", base + 0xa200, 24, 3, pcie_phy_sel, ARRAY_SIZE(pcie_phy_sel));
+ clks[IMX7D_EPDC_PIXEL_ROOT_SRC] = imx_clk_mux("epdc_pixel_src", base + 0xa280, 24, 3, epdc_pixel_sel, ARRAY_SIZE(epdc_pixel_sel));
+ clks[IMX7D_LCDIF_PIXEL_ROOT_SRC] = imx_clk_mux("lcdif_pixel_src", base + 0xa300, 24, 3, lcdif_pixel_sel, ARRAY_SIZE(lcdif_pixel_sel));
+ clks[IMX7D_MIPI_DSI_ROOT_SRC] = imx_clk_mux("mipi_dsi_src", base + 0xa380, 24, 3, mipi_dsi_sel, ARRAY_SIZE(mipi_dsi_sel));
+ clks[IMX7D_MIPI_CSI_ROOT_SRC] = imx_clk_mux("mipi_csi_src", base + 0xa400, 24, 3, mipi_csi_sel, ARRAY_SIZE(mipi_csi_sel));
+ clks[IMX7D_MIPI_DPHY_ROOT_SRC] = imx_clk_mux("mipi_dphy_src", base + 0xa480, 24, 3, mipi_dphy_sel, ARRAY_SIZE(mipi_dphy_sel));
+ clks[IMX7D_SAI1_ROOT_SRC] = imx_clk_mux("sai1_src", base + 0xa500, 24, 3, sai1_sel, ARRAY_SIZE(sai1_sel));
+ clks[IMX7D_SAI2_ROOT_SRC] = imx_clk_mux("sai2_src", base + 0xa580, 24, 3, sai2_sel, ARRAY_SIZE(sai2_sel));
+ clks[IMX7D_SAI3_ROOT_SRC] = imx_clk_mux("sai3_src", base + 0xa600, 24, 3, sai3_sel, ARRAY_SIZE(sai3_sel));
+ clks[IMX7D_SPDIF_ROOT_SRC] = imx_clk_mux("spdif_src", base + 0xa680, 24, 3, spdif_sel, ARRAY_SIZE(spdif_sel));
+ clks[IMX7D_ENET1_REF_ROOT_SRC] = imx_clk_mux("enet1_ref_src", base + 0xa700, 24, 3, enet1_ref_sel, ARRAY_SIZE(enet1_ref_sel));
+ clks[IMX7D_ENET1_TIME_ROOT_SRC] = imx_clk_mux("enet1_time_src", base + 0xa780, 24, 3, enet1_time_sel, ARRAY_SIZE(enet1_time_sel));
+ clks[IMX7D_ENET2_REF_ROOT_SRC] = imx_clk_mux("enet2_ref_src", base + 0xa800, 24, 3, enet2_ref_sel, ARRAY_SIZE(enet2_ref_sel));
+ clks[IMX7D_ENET2_TIME_ROOT_SRC] = imx_clk_mux("enet2_time_src", base + 0xa880, 24, 3, enet2_time_sel, ARRAY_SIZE(enet2_time_sel));
+ clks[IMX7D_ENET_PHY_REF_ROOT_SRC] = imx_clk_mux("enet_phy_ref_src", base + 0xa900, 24, 3, enet_phy_ref_sel, ARRAY_SIZE(enet_phy_ref_sel));
+ clks[IMX7D_EIM_ROOT_SRC] = imx_clk_mux("eim_src", base + 0xa980, 24, 3, eim_sel, ARRAY_SIZE(eim_sel));
+ clks[IMX7D_NAND_ROOT_SRC] = imx_clk_mux("nand_src", base + 0xaa00, 24, 3, nand_sel, ARRAY_SIZE(nand_sel));
+ clks[IMX7D_QSPI_ROOT_SRC] = imx_clk_mux("qspi_src", base + 0xaa80, 24, 3, qspi_sel, ARRAY_SIZE(qspi_sel));
+ clks[IMX7D_USDHC1_ROOT_SRC] = imx_clk_mux("usdhc1_src", base + 0xab00, 24, 3, usdhc1_sel, ARRAY_SIZE(usdhc1_sel));
+ clks[IMX7D_USDHC2_ROOT_SRC] = imx_clk_mux("usdhc2_src", base + 0xab80, 24, 3, usdhc2_sel, ARRAY_SIZE(usdhc2_sel));
+ clks[IMX7D_USDHC3_ROOT_SRC] = imx_clk_mux("usdhc3_src", base + 0xac00, 24, 3, usdhc3_sel, ARRAY_SIZE(usdhc3_sel));
+ clks[IMX7D_CAN1_ROOT_SRC] = imx_clk_mux("can1_src", base + 0xac80, 24, 3, can1_sel, ARRAY_SIZE(can1_sel));
+ clks[IMX7D_CAN2_ROOT_SRC] = imx_clk_mux("can2_src", base + 0xad00, 24, 3, can2_sel, ARRAY_SIZE(can2_sel));
+ clks[IMX7D_I2C1_ROOT_SRC] = imx_clk_mux("i2c1_src", base + 0xad80, 24, 3, i2c1_sel, ARRAY_SIZE(i2c1_sel));
+ clks[IMX7D_I2C2_ROOT_SRC] = imx_clk_mux("i2c2_src", base + 0xae00, 24, 3, i2c2_sel, ARRAY_SIZE(i2c2_sel));
+ clks[IMX7D_I2C3_ROOT_SRC] = imx_clk_mux("i2c3_src", base + 0xae80, 24, 3, i2c3_sel, ARRAY_SIZE(i2c3_sel));
+ clks[IMX7D_I2C4_ROOT_SRC] = imx_clk_mux("i2c4_src", base + 0xaf00, 24, 3, i2c4_sel, ARRAY_SIZE(i2c4_sel));
+ clks[IMX7D_UART1_ROOT_SRC] = imx_clk_mux("uart1_src", base + 0xaf80, 24, 3, uart1_sel, ARRAY_SIZE(uart1_sel));
+ clks[IMX7D_UART2_ROOT_SRC] = imx_clk_mux("uart2_src", base + 0xb000, 24, 3, uart2_sel, ARRAY_SIZE(uart2_sel));
+ clks[IMX7D_UART3_ROOT_SRC] = imx_clk_mux("uart3_src", base + 0xb080, 24, 3, uart3_sel, ARRAY_SIZE(uart3_sel));
+ clks[IMX7D_UART4_ROOT_SRC] = imx_clk_mux("uart4_src", base + 0xb100, 24, 3, uart4_sel, ARRAY_SIZE(uart4_sel));
+ clks[IMX7D_UART5_ROOT_SRC] = imx_clk_mux("uart5_src", base + 0xb180, 24, 3, uart5_sel, ARRAY_SIZE(uart5_sel));
+ clks[IMX7D_UART6_ROOT_SRC] = imx_clk_mux("uart6_src", base + 0xb200, 24, 3, uart6_sel, ARRAY_SIZE(uart6_sel));
+ clks[IMX7D_UART7_ROOT_SRC] = imx_clk_mux("uart7_src", base + 0xb280, 24, 3, uart7_sel, ARRAY_SIZE(uart7_sel));
+ clks[IMX7D_ECSPI1_ROOT_SRC] = imx_clk_mux("ecspi1_src", base + 0xb300, 24, 3, ecspi1_sel, ARRAY_SIZE(ecspi1_sel));
+ clks[IMX7D_ECSPI2_ROOT_SRC] = imx_clk_mux("ecspi2_src", base + 0xb380, 24, 3, ecspi2_sel, ARRAY_SIZE(ecspi2_sel));
+ clks[IMX7D_ECSPI3_ROOT_SRC] = imx_clk_mux("ecspi3_src", base + 0xb400, 24, 3, ecspi3_sel, ARRAY_SIZE(ecspi3_sel));
+ clks[IMX7D_ECSPI4_ROOT_SRC] = imx_clk_mux("ecspi4_src", base + 0xb480, 24, 3, ecspi4_sel, ARRAY_SIZE(ecspi4_sel));
+ clks[IMX7D_PWM1_ROOT_SRC] = imx_clk_mux("pwm1_src", base + 0xb500, 24, 3, pwm1_sel, ARRAY_SIZE(pwm1_sel));
+ clks[IMX7D_PWM2_ROOT_SRC] = imx_clk_mux("pwm2_src", base + 0xb580, 24, 3, pwm2_sel, ARRAY_SIZE(pwm2_sel));
+ clks[IMX7D_PWM3_ROOT_SRC] = imx_clk_mux("pwm3_src", base + 0xb600, 24, 3, pwm3_sel, ARRAY_SIZE(pwm3_sel));
+ clks[IMX7D_PWM4_ROOT_SRC] = imx_clk_mux("pwm4_src", base + 0xb680, 24, 3, pwm4_sel, ARRAY_SIZE(pwm4_sel));
+ clks[IMX7D_FLEXTIMER1_ROOT_SRC] = imx_clk_mux("flextimer1_src", base + 0xb700, 24, 3, flextimer1_sel, ARRAY_SIZE(flextimer1_sel));
+ clks[IMX7D_FLEXTIMER2_ROOT_SRC] = imx_clk_mux("flextimer2_src", base + 0xb780, 24, 3, flextimer2_sel, ARRAY_SIZE(flextimer2_sel));
+ clks[IMX7D_SIM1_ROOT_SRC] = imx_clk_mux("sim1_src", base + 0xb800, 24, 3, sim1_sel, ARRAY_SIZE(sim1_sel));
+ clks[IMX7D_SIM2_ROOT_SRC] = imx_clk_mux("sim2_src", base + 0xb880, 24, 3, sim2_sel, ARRAY_SIZE(sim2_sel));
+ clks[IMX7D_GPT1_ROOT_SRC] = imx_clk_mux("gpt1_src", base + 0xb900, 24, 3, gpt1_sel, ARRAY_SIZE(gpt1_sel));
+ clks[IMX7D_GPT2_ROOT_SRC] = imx_clk_mux("gpt2_src", base + 0xb980, 24, 3, gpt2_sel, ARRAY_SIZE(gpt2_sel));
+ clks[IMX7D_GPT3_ROOT_SRC] = imx_clk_mux("gpt3_src", base + 0xba00, 24, 3, gpt3_sel, ARRAY_SIZE(gpt3_sel));
+ clks[IMX7D_GPT4_ROOT_SRC] = imx_clk_mux("gpt4_src", base + 0xba80, 24, 3, gpt4_sel, ARRAY_SIZE(gpt4_sel));
+ clks[IMX7D_TRACE_ROOT_SRC] = imx_clk_mux("trace_src", base + 0xbb00, 24, 3, trace_sel, ARRAY_SIZE(trace_sel));
+ clks[IMX7D_WDOG_ROOT_SRC] = imx_clk_mux("wdog_src", base + 0xbb80, 24, 3, wdog_sel, ARRAY_SIZE(wdog_sel));
+ clks[IMX7D_CSI_MCLK_ROOT_SRC] = imx_clk_mux("csi_mclk_src", base + 0xbc00, 24, 3, csi_mclk_sel, ARRAY_SIZE(csi_mclk_sel));
+ clks[IMX7D_AUDIO_MCLK_ROOT_SRC] = imx_clk_mux("audio_mclk_src", base + 0xbc80, 24, 3, audio_mclk_sel, ARRAY_SIZE(audio_mclk_sel));
+ clks[IMX7D_WRCLK_ROOT_SRC] = imx_clk_mux("wrclk_src", base + 0xbd00, 24, 3, wrclk_sel, ARRAY_SIZE(wrclk_sel));
+ clks[IMX7D_CLKO1_ROOT_SRC] = imx_clk_mux("clko1_src", base + 0xbd80, 24, 3, clko1_sel, ARRAY_SIZE(clko1_sel));
+ clks[IMX7D_CLKO2_ROOT_SRC] = imx_clk_mux("clko2_src", base + 0xbe00, 24, 3, clko2_sel, ARRAY_SIZE(clko2_sel));
+
+ clks[IMX7D_ARM_A7_ROOT_CG] = imx_clk_gate("arm_a7_cg", "arm_a7_src", base + 0x8000, 28);
+ clks[IMX7D_ARM_M4_ROOT_CG] = imx_clk_gate("arm_m4_cg", "arm_m4_src", base + 0x8080, 28);
+ clks[IMX7D_ARM_M0_ROOT_CG] = imx_clk_gate("arm_m0_cg", "arm_m0_src", base + 0x8100, 28);
+ clks[IMX7D_MAIN_AXI_ROOT_CG] = imx_clk_gate("axi_cg", "axi_src", base + 0x8800, 28);
+ clks[IMX7D_DISP_AXI_ROOT_CG] = imx_clk_gate("disp_axi_cg", "disp_axi_src", base + 0x8880, 28);
+ clks[IMX7D_ENET_AXI_ROOT_CG] = imx_clk_gate("enet_axi_cg", "enet_axi_src", base + 0x8900, 28);
+ clks[IMX7D_NAND_USDHC_BUS_ROOT_CG] = imx_clk_gate("nand_usdhc_cg", "nand_usdhc_src", base + 0x8980, 28);
+ clks[IMX7D_AHB_CHANNEL_ROOT_CG] = imx_clk_gate("ahb_cg", "ahb_src", base + 0x9000, 28);
+ clks[IMX7D_DRAM_PHYM_ROOT_CG] = imx_clk_gate("dram_phym_cg", "dram_phym_src", base + 0x9800, 28);
+ clks[IMX7D_DRAM_ROOT_CG] = imx_clk_gate("dram_cg", "dram_src", base + 0x9880, 28);
+ clks[IMX7D_DRAM_PHYM_ALT_ROOT_CG] = imx_clk_gate("dram_phym_alt_cg", "dram_phym_alt_src", base + 0xa000, 28);
+ clks[IMX7D_DRAM_ALT_ROOT_CG] = imx_clk_gate("dram_alt_cg", "dram_alt_src", base + 0xa080, 28);
+ clks[IMX7D_USB_HSIC_ROOT_CG] = imx_clk_gate("usb_hsic_cg", "usb_hsic_src", base + 0xa100, 28);
+ clks[IMX7D_PCIE_CTRL_ROOT_CG] = imx_clk_gate("pcie_ctrl_cg", "pcie_ctrl_src", base + 0xa180, 28);
+ clks[IMX7D_PCIE_PHY_ROOT_CG] = imx_clk_gate("pcie_phy_cg", "pcie_phy_src", base + 0xa200, 28);
+ clks[IMX7D_EPDC_PIXEL_ROOT_CG] = imx_clk_gate("epdc_pixel_cg", "epdc_pixel_src", base + 0xa280, 28);
+ clks[IMX7D_LCDIF_PIXEL_ROOT_CG] = imx_clk_gate("lcdif_pixel_cg", "lcdif_pixel_src", base + 0xa300, 28);
+ clks[IMX7D_MIPI_DSI_ROOT_CG] = imx_clk_gate("mipi_dsi_cg", "mipi_dsi_src", base + 0xa380, 28);
+ clks[IMX7D_MIPI_CSI_ROOT_CG] = imx_clk_gate("mipi_csi_cg", "mipi_csi_src", base + 0xa400, 28);
+ clks[IMX7D_MIPI_DPHY_ROOT_CG] = imx_clk_gate("mipi_dphy_cg", "mipi_dphy_src", base + 0xa480, 28);
+ clks[IMX7D_SAI1_ROOT_CG] = imx_clk_gate("sai1_cg", "sai1_src", base + 0xa500, 28);
+ clks[IMX7D_SAI2_ROOT_CG] = imx_clk_gate("sai2_cg", "sai2_src", base + 0xa580, 28);
+ clks[IMX7D_SAI3_ROOT_CG] = imx_clk_gate("sai3_cg", "sai3_src", base + 0xa600, 28);
+ clks[IMX7D_SPDIF_ROOT_CG] = imx_clk_gate("spdif_cg", "spdif_src", base + 0xa680, 28);
+ clks[IMX7D_ENET1_REF_ROOT_CG] = imx_clk_gate("enet1_ref_cg", "enet1_ref_src", base + 0xa700, 28);
+ clks[IMX7D_ENET1_TIME_ROOT_CG] = imx_clk_gate("enet1_time_cg", "enet1_time_src", base + 0xa780, 28);
+ clks[IMX7D_ENET2_REF_ROOT_CG] = imx_clk_gate("enet2_ref_cg", "enet2_ref_src", base + 0xa800, 28);
+ clks[IMX7D_ENET2_TIME_ROOT_CG] = imx_clk_gate("enet2_time_cg", "enet2_time_src", base + 0xa880, 28);
+ clks[IMX7D_ENET_PHY_REF_ROOT_CG] = imx_clk_gate("enet_phy_ref_cg", "enet_phy_ref_src", base + 0xa900, 28);
+ clks[IMX7D_EIM_ROOT_CG] = imx_clk_gate("eim_cg", "eim_src", base + 0xa980, 28);
+ clks[IMX7D_NAND_ROOT_CG] = imx_clk_gate("nand_cg", "nand_src", base + 0xaa00, 28);
+ clks[IMX7D_QSPI_ROOT_CG] = imx_clk_gate("qspi_cg", "qspi_src", base + 0xaa80, 28);
+ clks[IMX7D_USDHC1_ROOT_CG] = imx_clk_gate("usdhc1_cg", "usdhc1_src", base + 0xab00, 28);
+ clks[IMX7D_USDHC2_ROOT_CG] = imx_clk_gate("usdhc2_cg", "usdhc2_src", base + 0xab80, 28);
+ clks[IMX7D_USDHC3_ROOT_CG] = imx_clk_gate("usdhc3_cg", "usdhc3_src", base + 0xac00, 28);
+ clks[IMX7D_CAN1_ROOT_CG] = imx_clk_gate("can1_cg", "can1_src", base + 0xac80, 28);
+ clks[IMX7D_CAN2_ROOT_CG] = imx_clk_gate("can2_cg", "can2_src", base + 0xad00, 28);
+ clks[IMX7D_I2C1_ROOT_CG] = imx_clk_gate("i2c1_cg", "i2c1_src", base + 0xad80, 28);
+ clks[IMX7D_I2C2_ROOT_CG] = imx_clk_gate("i2c2_cg", "i2c2_src", base + 0xae00, 28);
+ clks[IMX7D_I2C3_ROOT_CG] = imx_clk_gate("i2c3_cg", "i2c3_src", base + 0xae80, 28);
+ clks[IMX7D_I2C4_ROOT_CG] = imx_clk_gate("i2c4_cg", "i2c4_src", base + 0xaf00, 28);
+ clks[IMX7D_UART1_ROOT_CG] = imx_clk_gate("uart1_cg", "uart1_src", base + 0xaf80, 28);
+ clks[IMX7D_UART2_ROOT_CG] = imx_clk_gate("uart2_cg", "uart2_src", base + 0xb000, 28);
+ clks[IMX7D_UART3_ROOT_CG] = imx_clk_gate("uart3_cg", "uart3_src", base + 0xb080, 28);
+ clks[IMX7D_UART4_ROOT_CG] = imx_clk_gate("uart4_cg", "uart4_src", base + 0xb100, 28);
+ clks[IMX7D_UART5_ROOT_CG] = imx_clk_gate("uart5_cg", "uart5_src", base + 0xb180, 28);
+ clks[IMX7D_UART6_ROOT_CG] = imx_clk_gate("uart6_cg", "uart6_src", base + 0xb200, 28);
+ clks[IMX7D_UART7_ROOT_CG] = imx_clk_gate("uart7_cg", "uart7_src", base + 0xb280, 28);
+ clks[IMX7D_ECSPI1_ROOT_CG] = imx_clk_gate("ecspi1_cg", "ecspi1_src", base + 0xb300, 28);
+ clks[IMX7D_ECSPI2_ROOT_CG] = imx_clk_gate("ecspi2_cg", "ecspi2_src", base + 0xb380, 28);
+ clks[IMX7D_ECSPI3_ROOT_CG] = imx_clk_gate("ecspi3_cg", "ecspi3_src", base + 0xb400, 28);
+ clks[IMX7D_ECSPI4_ROOT_CG] = imx_clk_gate("ecspi4_cg", "ecspi4_src", base + 0xb480, 28);
+ clks[IMX7D_PWM1_ROOT_CG] = imx_clk_gate("pwm1_cg", "pwm1_src", base + 0xb500, 28);
+ clks[IMX7D_PWM2_ROOT_CG] = imx_clk_gate("pwm2_cg", "pwm2_src", base + 0xb580, 28);
+ clks[IMX7D_PWM3_ROOT_CG] = imx_clk_gate("pwm3_cg", "pwm3_src", base + 0xb600, 28);
+ clks[IMX7D_PWM4_ROOT_CG] = imx_clk_gate("pwm4_cg", "pwm4_src", base + 0xb680, 28);
+ clks[IMX7D_FLEXTIMER1_ROOT_CG] = imx_clk_gate("flextimer1_cg", "flextimer1_src", base + 0xb700, 28);
+ clks[IMX7D_FLEXTIMER2_ROOT_CG] = imx_clk_gate("flextimer2_cg", "flextimer2_src", base + 0xb780, 28);
+ clks[IMX7D_SIM1_ROOT_CG] = imx_clk_gate("sim1_cg", "sim1_src", base + 0xb800, 28);
+ clks[IMX7D_SIM2_ROOT_CG] = imx_clk_gate("sim2_cg", "sim2_src", base + 0xb880, 28);
+ clks[IMX7D_GPT1_ROOT_CG] = imx_clk_gate("gpt1_cg", "gpt1_src", base + 0xb900, 28);
+ clks[IMX7D_GPT2_ROOT_CG] = imx_clk_gate("gpt2_cg", "gpt2_src", base + 0xb980, 28);
+ clks[IMX7D_GPT3_ROOT_CG] = imx_clk_gate("gpt3_cg", "gpt3_src", base + 0xbA00, 28);
+ clks[IMX7D_GPT4_ROOT_CG] = imx_clk_gate("gpt4_cg", "gpt4_src", base + 0xbA80, 28);
+ clks[IMX7D_TRACE_ROOT_CG] = imx_clk_gate("trace_cg", "trace_src", base + 0xbb00, 28);
+ clks[IMX7D_WDOG_ROOT_CG] = imx_clk_gate("wdog_cg", "wdog_src", base + 0xbb80, 28);
+ clks[IMX7D_CSI_MCLK_ROOT_CG] = imx_clk_gate("csi_mclk_cg", "csi_mclk_src", base + 0xbc00, 28);
+ clks[IMX7D_AUDIO_MCLK_ROOT_CG] = imx_clk_gate("audio_mclk_cg", "audio_mclk_src", base + 0xbc80, 28);
+ clks[IMX7D_WRCLK_ROOT_CG] = imx_clk_gate("wrclk_cg", "wrclk_src", base + 0xbd00, 28);
+ clks[IMX7D_CLKO1_ROOT_CG] = imx_clk_gate("clko1_cg", "clko1_src", base + 0xbd80, 28);
+ clks[IMX7D_CLKO2_ROOT_CG] = imx_clk_gate("clko2_cg", "clko2_src", base + 0xbe00, 28);
+
+ clks[IMX7D_MAIN_AXI_ROOT_PRE_DIV] = imx_clk_divider("axi_pre_div", "axi_cg", base + 0x8800, 16, 3);
+ clks[IMX7D_DISP_AXI_ROOT_PRE_DIV] = imx_clk_divider("disp_axi_pre_div", "disp_axi_cg", base + 0x8880, 16, 3);
+ clks[IMX7D_ENET_AXI_ROOT_PRE_DIV] = imx_clk_divider("enet_axi_pre_div", "enet_axi_cg", base + 0x8900, 16, 3);
+ clks[IMX7D_NAND_USDHC_BUS_ROOT_PRE_DIV] = imx_clk_divider("nand_usdhc_pre_div", "nand_usdhc_cg", base + 0x8980, 16, 3);
+ clks[IMX7D_AHB_CHANNEL_ROOT_PRE_DIV] = imx_clk_divider("ahb_pre_div", "ahb_cg", base + 0x9000, 16, 3);
+ clks[IMX7D_DRAM_PHYM_ALT_ROOT_PRE_DIV] = imx_clk_divider("dram_phym_alt_pre_div", "dram_phym_alt_cg", base + 0xa000, 16, 3);
+ clks[IMX7D_DRAM_ALT_ROOT_PRE_DIV] = imx_clk_divider("dram_alt_pre_div", "dram_alt_cg", base + 0xa080, 16, 3);
+ clks[IMX7D_USB_HSIC_ROOT_PRE_DIV] = imx_clk_divider("usb_hsic_pre_div", "usb_hsic_cg", base + 0xa100, 16, 3);
+ clks[IMX7D_PCIE_CTRL_ROOT_PRE_DIV] = imx_clk_divider("pcie_ctrl_pre_div", "pcie_ctrl_cg", base + 0xa180, 16, 3);
+ clks[IMX7D_PCIE_PHY_ROOT_PRE_DIV] = imx_clk_divider("pcie_phy_pre_div", "pcie_phy_cg", base + 0xa200, 16, 3);
+ clks[IMX7D_EPDC_PIXEL_ROOT_PRE_DIV] = imx_clk_divider("epdc_pixel_pre_div", "epdc_pixel_cg", base + 0xa280, 16, 3);
+ clks[IMX7D_LCDIF_PIXEL_ROOT_PRE_DIV] = imx_clk_divider("lcdif_pixel_pre_div", "lcdif_pixel_cg", base + 0xa300, 16, 3);
+ clks[IMX7D_MIPI_DSI_ROOT_PRE_DIV] = imx_clk_divider("mipi_dsi_pre_div", "mipi_dsi_cg", base + 0xa380, 16, 3);
+ clks[IMX7D_MIPI_CSI_ROOT_PRE_DIV] = imx_clk_divider("mipi_csi_pre_div", "mipi_csi_cg", base + 0xa400, 16, 3);
+ clks[IMX7D_MIPI_DPHY_ROOT_PRE_DIV] = imx_clk_divider("mipi_dphy_pre_div", "mipi_dphy_cg", base + 0xa480, 16, 3);
+ clks[IMX7D_SAI1_ROOT_PRE_DIV] = imx_clk_divider("sai1_pre_div", "sai1_cg", base + 0xa500, 16, 3);
+ clks[IMX7D_SAI2_ROOT_PRE_DIV] = imx_clk_divider("sai2_pre_div", "sai2_cg", base + 0xa580, 16, 3);
+ clks[IMX7D_SAI3_ROOT_PRE_DIV] = imx_clk_divider("sai3_pre_div", "sai3_cg", base + 0xa600, 16, 3);
+ clks[IMX7D_SPDIF_ROOT_PRE_DIV] = imx_clk_divider("spdif_pre_div", "spdif_cg", base + 0xa680, 16, 3);
+ clks[IMX7D_ENET1_REF_ROOT_PRE_DIV] = imx_clk_divider("enet1_ref_pre_div", "enet1_ref_cg", base + 0xa700, 16, 3);
+ clks[IMX7D_ENET1_TIME_ROOT_PRE_DIV] = imx_clk_divider("enet1_time_pre_div", "enet1_time_cg", base + 0xa780, 16, 3);
+ clks[IMX7D_ENET2_REF_ROOT_PRE_DIV] = imx_clk_divider("enet2_ref_pre_div", "enet2_ref_cg", base + 0xa800, 16, 3);
+ clks[IMX7D_ENET2_TIME_ROOT_PRE_DIV] = imx_clk_divider("enet2_time_pre_div", "enet2_time_cg", base + 0xa880, 16, 3);
+ clks[IMX7D_ENET_PHY_REF_ROOT_PRE_DIV] = imx_clk_divider("enet_phy_ref_pre_div", "enet_phy_ref_cg", base + 0xa900, 16, 3);
+ clks[IMX7D_EIM_ROOT_PRE_DIV] = imx_clk_divider("eim_pre_div", "eim_cg", base + 0xa980, 16, 3);
+ clks[IMX7D_NAND_ROOT_PRE_DIV] = imx_clk_divider("nand_pre_div", "nand_cg", base + 0xaa00, 16, 3);
+ clks[IMX7D_QSPI_ROOT_PRE_DIV] = imx_clk_divider("qspi_pre_div", "qspi_cg", base + 0xaa80, 16, 3);
+ clks[IMX7D_USDHC1_ROOT_PRE_DIV] = imx_clk_divider("usdhc1_pre_div", "usdhc1_cg", base + 0xab00, 16, 3);
+ clks[IMX7D_USDHC2_ROOT_PRE_DIV] = imx_clk_divider("usdhc2_pre_div", "usdhc2_cg", base + 0xab80, 16, 3);
+ clks[IMX7D_USDHC3_ROOT_PRE_DIV] = imx_clk_divider("usdhc3_pre_div", "usdhc3_cg", base + 0xac00, 16, 3);
+ clks[IMX7D_CAN1_ROOT_PRE_DIV] = imx_clk_divider("can1_pre_div", "can1_cg", base + 0xac80, 16, 3);
+ clks[IMX7D_CAN2_ROOT_PRE_DIV] = imx_clk_divider("can2_pre_div", "can2_cg", base + 0xad00, 16, 3);
+ clks[IMX7D_I2C1_ROOT_PRE_DIV] = imx_clk_divider("i2c1_pre_div", "i2c1_cg", base + 0xad80, 16, 3);
+ clks[IMX7D_I2C2_ROOT_PRE_DIV] = imx_clk_divider("i2c2_pre_div", "i2c2_cg", base + 0xae00, 16, 3);
+ clks[IMX7D_I2C3_ROOT_PRE_DIV] = imx_clk_divider("i2c3_pre_div", "i2c3_cg", base + 0xae80, 16, 3);
+ clks[IMX7D_I2C4_ROOT_PRE_DIV] = imx_clk_divider("i2c4_pre_div", "i2c4_cg", base + 0xaf00, 16, 3);
+ clks[IMX7D_UART1_ROOT_PRE_DIV] = imx_clk_divider("uart1_pre_div", "uart1_cg", base + 0xaf80, 16, 3);
+ clks[IMX7D_UART2_ROOT_PRE_DIV] = imx_clk_divider("uart2_pre_div", "uart2_cg", base + 0xb000, 16, 3);
+ clks[IMX7D_UART3_ROOT_PRE_DIV] = imx_clk_divider("uart3_pre_div", "uart3_cg", base + 0xb080, 16, 3);
+ clks[IMX7D_UART4_ROOT_PRE_DIV] = imx_clk_divider("uart4_pre_div", "uart4_cg", base + 0xb100, 16, 3);
+ clks[IMX7D_UART5_ROOT_PRE_DIV] = imx_clk_divider("uart5_pre_div", "uart5_cg", base + 0xb180, 16, 3);
+ clks[IMX7D_UART6_ROOT_PRE_DIV] = imx_clk_divider("uart6_pre_div", "uart6_cg", base + 0xb200, 16, 3);
+ clks[IMX7D_UART7_ROOT_PRE_DIV] = imx_clk_divider("uart7_pre_div", "uart7_cg", base + 0xb280, 16, 3);
+ clks[IMX7D_ECSPI1_ROOT_PRE_DIV] = imx_clk_divider("ecspi1_pre_div", "ecspi1_cg", base + 0xb300, 16, 3);
+ clks[IMX7D_ECSPI2_ROOT_PRE_DIV] = imx_clk_divider("ecspi2_pre_div", "ecspi2_cg", base + 0xb380, 16, 3);
+ clks[IMX7D_ECSPI3_ROOT_PRE_DIV] = imx_clk_divider("ecspi3_pre_div", "ecspi3_cg", base + 0xb400, 16, 3);
+ clks[IMX7D_ECSPI4_ROOT_PRE_DIV] = imx_clk_divider("ecspi4_pre_div", "ecspi4_cg", base + 0xb480, 16, 3);
+ clks[IMX7D_PWM1_ROOT_PRE_DIV] = imx_clk_divider("pwm1_pre_div", "pwm1_cg", base + 0xb500, 16, 3);
+ clks[IMX7D_PWM2_ROOT_PRE_DIV] = imx_clk_divider("pwm2_pre_div", "pwm2_cg", base + 0xb580, 16, 3);
+ clks[IMX7D_PWM3_ROOT_PRE_DIV] = imx_clk_divider("pwm3_pre_div", "pwm3_cg", base + 0xb600, 16, 3);
+ clks[IMX7D_PWM4_ROOT_PRE_DIV] = imx_clk_divider("pwm4_pre_div", "pwm4_cg", base + 0xb680, 16, 3);
+ clks[IMX7D_FLEXTIMER1_ROOT_PRE_DIV] = imx_clk_divider("flextimer1_pre_div", "flextimer1_cg", base + 0xb700, 16, 3);
+ clks[IMX7D_FLEXTIMER2_ROOT_PRE_DIV] = imx_clk_divider("flextimer2_pre_div", "flextimer2_cg", base + 0xb780, 16, 3);
+ clks[IMX7D_SIM1_ROOT_PRE_DIV] = imx_clk_divider("sim1_pre_div", "sim1_cg", base + 0xb800, 16, 3);
+ clks[IMX7D_SIM2_ROOT_PRE_DIV] = imx_clk_divider("sim2_pre_div", "sim2_cg", base + 0xb880, 16, 3);
+ clks[IMX7D_GPT1_ROOT_PRE_DIV] = imx_clk_divider("gpt1_pre_div", "gpt1_cg", base + 0xb900, 16, 3);
+ clks[IMX7D_GPT2_ROOT_PRE_DIV] = imx_clk_divider("gpt2_pre_div", "gpt2_cg", base + 0xb980, 16, 3);
+ clks[IMX7D_GPT3_ROOT_PRE_DIV] = imx_clk_divider("gpt3_pre_div", "gpt3_cg", base + 0xba00, 16, 3);
+ clks[IMX7D_GPT4_ROOT_PRE_DIV] = imx_clk_divider("gpt4_pre_div", "gpt4_cg", base + 0xba80, 16, 3);
+ clks[IMX7D_TRACE_ROOT_PRE_DIV] = imx_clk_divider("trace_pre_div", "trace_cg", base + 0xbb00, 16, 3);
+ clks[IMX7D_WDOG_ROOT_PRE_DIV] = imx_clk_divider("wdog_pre_div", "wdog_cg", base + 0xbb80, 16, 3);
+ clks[IMX7D_CSI_MCLK_ROOT_PRE_DIV] = imx_clk_divider("csi_mclk_pre_div", "csi_mclk_cg", base + 0xbc00, 16, 3);
+ clks[IMX7D_AUDIO_MCLK_ROOT_PRE_DIV] = imx_clk_divider("audio_mclk_pre_div", "audio_mclk_cg", base + 0xbc80, 16, 3);
+ clks[IMX7D_WRCLK_ROOT_PRE_DIV] = imx_clk_divider("wrclk_pre_div", "wrclk_cg", base + 0xbd00, 16, 3);
+ clks[IMX7D_CLKO1_ROOT_PRE_DIV] = imx_clk_divider("clko1_pre_div", "clko1_cg", base + 0xbd80, 16, 3);
+ clks[IMX7D_CLKO2_ROOT_PRE_DIV] = imx_clk_divider("clko2_pre_div", "clko2_cg", base + 0xbe00, 16, 3);
+
+ clks[IMX7D_ARM_A7_ROOT_DIV] = imx_clk_divider("arm_a7_div", "arm_a7_cg", base + 0x8000, 0, 3);
+ clks[IMX7D_ARM_M4_ROOT_DIV] = imx_clk_divider("arm_m4_div", "arm_m4_cg", base + 0x8080, 0, 3);
+ clks[IMX7D_ARM_M0_ROOT_DIV] = imx_clk_divider("arm_m0_div", "arm_m0_cg", base + 0x8100, 0, 3);
+ clks[IMX7D_MAIN_AXI_ROOT_DIV] = imx_clk_divider("axi_post_div", "axi_pre_div", base + 0x8800, 0, 6);
+ clks[IMX7D_DISP_AXI_ROOT_DIV] = imx_clk_divider("disp_axi_post_div", "disp_axi_pre_div", base + 0x8880, 0, 6);
+ clks[IMX7D_ENET_AXI_ROOT_DIV] = imx_clk_divider("enet_axi_post_div", "enet_axi_pre_div", base + 0x8900, 0, 6);
+ clks[IMX7D_NAND_USDHC_BUS_ROOT_DIV] = imx_clk_divider("nand_usdhc_post_div", "nand_usdhc_pre_div", base + 0x8980, 0, 6);
+ clks[IMX7D_AHB_CHANNEL_ROOT_DIV] = imx_clk_divider("ahb_post_div", "ahb_pre_div", base + 0x9000, 0, 6);
+ clks[IMX7D_DRAM_ROOT_DIV] = imx_clk_divider("dram_post_div", "dram_cg", base + 0x9880, 0, 3);
+ clks[IMX7D_DRAM_PHYM_ALT_ROOT_DIV] = imx_clk_divider("dram_phym_alt_post_div", "dram_phym_alt_pre_div", base + 0xa000, 0, 3);
+ clks[IMX7D_DRAM_ALT_ROOT_DIV] = imx_clk_divider("dram_alt_post_div", "dram_alt_pre_div", base + 0xa080, 0, 3);
+ clks[IMX7D_USB_HSIC_ROOT_DIV] = imx_clk_divider("usb_hsic_post_div", "usb_hsic_pre_div", base + 0xa100, 0, 6);
+ clks[IMX7D_PCIE_CTRL_ROOT_DIV] = imx_clk_divider("pcie_ctrl_post_div", "pcie_ctrl_pre_div", base + 0xa180, 0, 6);
+ clks[IMX7D_PCIE_PHY_ROOT_DIV] = imx_clk_divider("pcie_phy_post_div", "pcie_phy_pre_div", base + 0xa200, 0, 6);
+ clks[IMX7D_EPDC_PIXEL_ROOT_DIV] = imx_clk_divider("epdc_pixel_post_div", "epdc_pixel_pre_div", base + 0xa280, 0, 6);
+ clks[IMX7D_LCDIF_PIXEL_ROOT_DIV] = imx_clk_divider("lcdif_pixel_post_div", "lcdif_pixel_pre_div", base + 0xa300, 0, 6);
+ clks[IMX7D_MIPI_DSI_ROOT_DIV] = imx_clk_divider("mipi_dsi_post_div", "mipi_dsi_pre_div", base + 0xa380, 0, 6);
+ clks[IMX7D_MIPI_CSI_ROOT_DIV] = imx_clk_divider("mipi_csi_post_div", "mipi_csi_pre_div", base + 0xa400, 0, 6);
+ clks[IMX7D_MIPI_DPHY_ROOT_DIV] = imx_clk_divider("mipi_dphy_post_div", "mipi_csi_dphy_div", base + 0xa480, 0, 6);
+ clks[IMX7D_SAI1_ROOT_DIV] = imx_clk_divider("sai1_post_div", "sai1_pre_div", base + 0xa500, 0, 6);
+ clks[IMX7D_SAI2_ROOT_DIV] = imx_clk_divider("sai2_post_div", "sai2_pre_div", base + 0xa580, 0, 6);
+ clks[IMX7D_SAI3_ROOT_DIV] = imx_clk_divider("sai3_post_div", "sai3_pre_div", base + 0xa600, 0, 6);
+ clks[IMX7D_SPDIF_ROOT_DIV] = imx_clk_divider("spdif_post_div", "spdif_pre_div", base + 0xa680, 0, 6);
+ clks[IMX7D_ENET1_REF_ROOT_DIV] = imx_clk_divider("enet1_ref_post_div", "enet1_ref_pre_div", base + 0xa700, 0, 6);
+ clks[IMX7D_ENET1_TIME_ROOT_DIV] = imx_clk_divider("enet1_time_post_div", "enet1_time_pre_div", base + 0xa780, 0, 6);
+ clks[IMX7D_ENET2_REF_ROOT_DIV] = imx_clk_divider("enet2_ref_post_div", "enet2_ref_pre_div", base + 0xa800, 0, 6);
+ clks[IMX7D_ENET2_TIME_ROOT_DIV] = imx_clk_divider("enet2_time_post_div", "enet2_time_pre_div", base + 0xa880, 0, 6);
+ clks[IMX7D_ENET_PHY_REF_ROOT_DIV] = imx_clk_divider("enet_phy_ref_post_div", "enet_phy_ref_pre_div", base + 0xa900, 0, 6);
+ clks[IMX7D_EIM_ROOT_DIV] = imx_clk_divider("eim_post_div", "eim_pre_div", base + 0xa980, 0, 6);
+ clks[IMX7D_NAND_ROOT_DIV] = imx_clk_divider("nand_post_div", "nand_pre_div", base + 0xaa00, 0, 6);
+ clks[IMX7D_QSPI_ROOT_DIV] = imx_clk_divider("qspi_post_div", "qspi_pre_div", base + 0xaa80, 0, 6);
+ clks[IMX7D_USDHC1_ROOT_DIV] = imx_clk_divider("usdhc1_post_div", "usdhc1_pre_div", base + 0xab00, 0, 6);
+ clks[IMX7D_USDHC2_ROOT_DIV] = imx_clk_divider("usdhc2_post_div", "usdhc2_pre_div", base + 0xab80, 0, 6);
+ clks[IMX7D_USDHC3_ROOT_DIV] = imx_clk_divider("usdhc3_post_div", "usdhc3_pre_div", base + 0xac00, 0, 6);
+ clks[IMX7D_CAN1_ROOT_DIV] = imx_clk_divider("can1_post_div", "can1_pre_div", base + 0xac80, 0, 6);
+ clks[IMX7D_CAN2_ROOT_DIV] = imx_clk_divider("can2_post_div", "can2_pre_div", base + 0xad00, 0, 6);
+ clks[IMX7D_I2C1_ROOT_DIV] = imx_clk_divider("i2c1_post_div", "i2c1_pre_div", base + 0xad80, 0, 6);
+ clks[IMX7D_I2C2_ROOT_DIV] = imx_clk_divider("i2c2_post_div", "i2c2_pre_div", base + 0xae00, 0, 6);
+ clks[IMX7D_I2C3_ROOT_DIV] = imx_clk_divider("i2c3_post_div", "i2c3_pre_div", base + 0xae80, 0, 6);
+ clks[IMX7D_I2C4_ROOT_DIV] = imx_clk_divider("i2c4_post_div", "i2c4_pre_div", base + 0xaf00, 0, 6);
+ clks[IMX7D_UART1_ROOT_DIV] = imx_clk_divider("uart1_post_div", "uart1_pre_div", base + 0xaf80, 0, 6);
+ clks[IMX7D_UART2_ROOT_DIV] = imx_clk_divider("uart2_post_div", "uart2_pre_div", base + 0xb000, 0, 6);
+ clks[IMX7D_UART3_ROOT_DIV] = imx_clk_divider("uart3_post_div", "uart3_pre_div", base + 0xb080, 0, 6);
+ clks[IMX7D_UART4_ROOT_DIV] = imx_clk_divider("uart4_post_div", "uart4_pre_div", base + 0xb100, 0, 6);
+ clks[IMX7D_UART5_ROOT_DIV] = imx_clk_divider("uart5_post_div", "uart5_pre_div", base + 0xb180, 0, 6);
+ clks[IMX7D_UART6_ROOT_DIV] = imx_clk_divider("uart6_post_div", "uart6_pre_div", base + 0xb200, 0, 6);
+ clks[IMX7D_UART7_ROOT_DIV] = imx_clk_divider("uart7_post_div", "uart7_pre_div", base + 0xb280, 0, 6);
+ clks[IMX7D_ECSPI1_ROOT_DIV] = imx_clk_divider("ecspi1_post_div", "ecspi1_pre_div", base + 0xb300, 0, 6);
+ clks[IMX7D_ECSPI2_ROOT_DIV] = imx_clk_divider("ecspi2_post_div", "ecspi2_pre_div", base + 0xb380, 0, 6);
+ clks[IMX7D_ECSPI3_ROOT_DIV] = imx_clk_divider("ecspi3_post_div", "ecspi3_pre_div", base + 0xb400, 0, 6);
+ clks[IMX7D_ECSPI4_ROOT_DIV] = imx_clk_divider("ecspi4_post_div", "ecspi4_pre_div", base + 0xb480, 0, 6);
+ clks[IMX7D_PWM1_ROOT_DIV] = imx_clk_divider("pwm1_post_div", "pwm1_pre_div", base + 0xb500, 0, 6);
+ clks[IMX7D_PWM2_ROOT_DIV] = imx_clk_divider("pwm2_post_div", "pwm2_pre_div", base + 0xb580, 0, 6);
+ clks[IMX7D_PWM3_ROOT_DIV] = imx_clk_divider("pwm3_post_div", "pwm3_pre_div", base + 0xb600, 0, 6);
+ clks[IMX7D_PWM4_ROOT_DIV] = imx_clk_divider("pwm4_post_div", "pwm4_pre_div", base + 0xb680, 0, 6);
+ clks[IMX7D_FLEXTIMER1_ROOT_DIV] = imx_clk_divider("flextimer1_post_div", "flextimer1_pre_div", base + 0xb700, 0, 6);
+ clks[IMX7D_FLEXTIMER2_ROOT_DIV] = imx_clk_divider("flextimer2_post_div", "flextimer2_pre_div", base + 0xb780, 0, 6);
+ clks[IMX7D_SIM1_ROOT_DIV] = imx_clk_divider("sim1_post_div", "sim1_pre_div", base + 0xb800, 0, 6);
+ clks[IMX7D_SIM2_ROOT_DIV] = imx_clk_divider("sim2_post_div", "sim2_pre_div", base + 0xb880, 0, 6);
+ clks[IMX7D_GPT1_ROOT_DIV] = imx_clk_divider("gpt1_post_div", "gpt1_pre_div", base + 0xb900, 0, 6);
+ clks[IMX7D_GPT2_ROOT_DIV] = imx_clk_divider("gpt2_post_div", "gpt2_pre_div", base + 0xb980, 0, 6);
+ clks[IMX7D_GPT3_ROOT_DIV] = imx_clk_divider("gpt3_post_div", "gpt3_pre_div", base + 0xba00, 0, 6);
+ clks[IMX7D_GPT4_ROOT_DIV] = imx_clk_divider("gpt4_post_div", "gpt4_pre_div", base + 0xba80, 0, 6);
+ clks[IMX7D_TRACE_ROOT_DIV] = imx_clk_divider("trace_post_div", "trace_pre_div", base + 0xbb00, 0, 6);
+ clks[IMX7D_WDOG_ROOT_DIV] = imx_clk_divider("wdog_post_div", "wdog_pre_div", base + 0xbb80, 0, 6);
+ clks[IMX7D_CSI_MCLK_ROOT_DIV] = imx_clk_divider("csi_mclk_post_div", "csi_mclk_pre_div", base + 0xbc00, 0, 6);
+ clks[IMX7D_AUDIO_MCLK_ROOT_DIV] = imx_clk_divider("audio_mclk_post_div", "audio_mclk_pre_div", base + 0xbc80, 0, 6);
+ clks[IMX7D_WRCLK_ROOT_DIV] = imx_clk_divider("wrclk_post_div", "wrclk_pre_div", base + 0xbd00, 0, 6);
+ clks[IMX7D_CLKO1_ROOT_DIV] = imx_clk_divider("clko1_post_div", "clko1_pre_div", base + 0xbd80, 0, 6);
+ clks[IMX7D_CLKO2_ROOT_DIV] = imx_clk_divider("clko2_post_div", "clko2_pre_div", base + 0xbe00, 0, 6);
+
+ clks[IMX7D_ARM_A7_ROOT_CLK] = imx_clk_gate2("arm_a7_root_clk", "arm_a7_div", base + 0x4000, 0);
+ clks[IMX7D_ARM_M4_ROOT_CLK] = imx_clk_gate2("arm_m4_root_clk", "arm_m4_div", base + 0x4010, 0);
+ clks[IMX7D_ARM_M0_ROOT_CLK] = imx_clk_gate2("arm_m0_root_clk", "arm_m0_div", base + 0x4020, 0);
+ clks[IMX7D_MAIN_AXI_ROOT_CLK] = imx_clk_gate2("main_axi_root_clk", "axi_post_div", base + 0x4040, 0);
+ clks[IMX7D_DISP_AXI_ROOT_CLK] = imx_clk_gate2("disp_axi_root_clk", "disp_axi_post_div", base + 0x4050, 0);
+ clks[IMX7D_ENET_AXI_ROOT_CLK] = imx_clk_gate2("enet_axi_root_clk", "enet_axi_post_div", base + 0x4060, 0);
+ clks[IMX7D_OCRAM_CLK] = imx_clk_gate2("ocram_clk", "axi_post_div", base + 0x4110, 0);
+ clks[IMX7D_OCRAM_S_CLK] = imx_clk_gate2("ocram_s_clk", "ahb_post_div", base + 0x4120, 0);
+ clks[IMX7D_NAND_USDHC_BUS_ROOT_CLK] = imx_clk_gate2("nand_usdhc_root_clk", "nand_usdhc_post_div", base + 0x4130, 0);
+ clks[IMX7D_AHB_CHANNEL_ROOT_CLK] = imx_clk_gate2("ahb_root_clk", "ahb_post_div", base + 0x4200, 0);
+ clks[IMX7D_DRAM_ROOT_CLK] = imx_clk_gate2("dram_root_clk", "dram_post_div", base + 0x4130, 0);
+ clks[IMX7D_DRAM_PHYM_ROOT_CLK] = imx_clk_gate2("dram_phym_root_clk", "dram_phym_cg", base + 0x4130, 0);
+ clks[IMX7D_DRAM_PHYM_ALT_ROOT_CLK] = imx_clk_gate2("dram_phym_alt_root_clk", "dram_phym_alt_post_div", base + 0x4130, 0);
+ clks[IMX7D_DRAM_ALT_ROOT_CLK] = imx_clk_gate2("dram_alt_root_clk", "dram_alt_post_div", base + 0x4130, 0);
+ clks[IMX7D_USB_HSIC_ROOT_CLK] = imx_clk_gate2("usb_hsic_root_clk", "usb_hsic_post_div", base + 0x4420, 0);
+ clks[IMX7D_PCIE_CTRL_ROOT_CLK] = imx_clk_gate2("pcie_ctrl_root_clk", "pcie_ctrl_post_div", base + 0x4600, 0);
+ clks[IMX7D_PCIE_PHY_ROOT_CLK] = imx_clk_gate2("pcie_phy_root_clk", "pcie_phy_post_div", base + 0x4600, 0);
+ clks[IMX7D_EPDC_PIXEL_ROOT_CLK] = imx_clk_gate2("epdc_pixel_root_clk", "epdc_pixel_post_div", base + 0x44a0, 0);
+ clks[IMX7D_LCDIF_PIXEL_ROOT_CLK] = imx_clk_gate2("lcdif_pixel_root_clk", "lcdif_pixel_post_div", base + 0x44b0, 0);
+ clks[IMX7D_MIPI_DSI_ROOT_CLK] = imx_clk_gate2("mipi_dsi_root_clk", "mipi_dsi_post_div", base + 0x4650, 0);
+ clks[IMX7D_MIPI_CSI_ROOT_CLK] = imx_clk_gate2("mipi_csi_root_clk", "mipi_csi_post_div", base + 0x4640, 0);
+ clks[IMX7D_MIPI_DPHY_ROOT_CLK] = imx_clk_gate2("mipi_dphy_root_clk", "mipi_dphy_post_div", base + 0x4660, 0);
+ clks[IMX7D_SAI1_ROOT_CLK] = imx_clk_gate2("sai1_root_clk", "sai1_post_div", base + 0x48c0, 0);
+ clks[IMX7D_SAI2_ROOT_CLK] = imx_clk_gate2("sai2_root_clk", "sai2_post_div", base + 0x48d0, 0);
+ clks[IMX7D_SAI3_ROOT_CLK] = imx_clk_gate2("sai3_root_clk", "sai3_post_div", base + 0x48e0, 0);
+ clks[IMX7D_SPDIF_ROOT_CLK] = imx_clk_gate2("spdif_root_clk", "spdif_post_div", base + 0x44d0, 0);
+ clks[IMX7D_ENET1_REF_ROOT_CLK] = imx_clk_gate2("enet1_ref_root_clk", "enet1_ref_post_div", base + 0x44e0, 0);
+ clks[IMX7D_ENET1_TIME_ROOT_CLK] = imx_clk_gate2("enet1_time_root_clk", "enet1_time_post_div", base + 0x44f0, 0);
+ clks[IMX7D_ENET2_REF_ROOT_CLK] = imx_clk_gate2("enet2_ref_root_clk", "enet2_ref_post_div", base + 0x4500, 0);
+ clks[IMX7D_ENET2_TIME_ROOT_CLK] = imx_clk_gate2("enet2_time_root_clk", "enet2_time_post_div", base + 0x4510, 0);
+ clks[IMX7D_ENET_PHY_REF_ROOT_CLK] = imx_clk_gate2("enet_phy_ref_root_clk", "enet_phy_ref_post_div", base + 0x4520, 0);
+ clks[IMX7D_EIM_ROOT_CLK] = imx_clk_gate2("eim_root_clk", "eim_post_div", base + 0x4160, 0);
+ clks[IMX7D_NAND_ROOT_CLK] = imx_clk_gate2("nand_root_clk", "nand_post_div", base + 0x4140, 0);
+ clks[IMX7D_QSPI_ROOT_CLK] = imx_clk_gate2("qspi_root_clk", "qspi_post_div", base + 0x4150, 0);
+ clks[IMX7D_USDHC1_ROOT_CLK] = imx_clk_gate2("usdhc1_root_clk", "usdhc1_post_div", base + 0x46c0, 0);
+ clks[IMX7D_USDHC2_ROOT_CLK] = imx_clk_gate2("usdhc2_root_clk", "usdhc2_post_div", base + 0x46d0, 0);
+ clks[IMX7D_USDHC3_ROOT_CLK] = imx_clk_gate2("usdhc3_root_clk", "usdhc3_post_div", base + 0x46e0, 0);
+ clks[IMX7D_CAN1_ROOT_CLK] = imx_clk_gate2("can1_root_clk", "can1_post_div", base + 0x4740, 0);
+ clks[IMX7D_CAN2_ROOT_CLK] = imx_clk_gate2("can2_root_clk", "can2_post_div", base + 0x4750, 0);
+ clks[IMX7D_I2C1_ROOT_CLK] = imx_clk_gate2("i2c1_root_clk", "i2c1_post_div", base + 0x4880, 0);
+ clks[IMX7D_I2C2_ROOT_CLK] = imx_clk_gate2("i2c2_root_clk", "i2c2_post_div", base + 0x4890, 0);
+ clks[IMX7D_I2C3_ROOT_CLK] = imx_clk_gate2("i2c3_root_clk", "i2c3_post_div", base + 0x48a0, 0);
+ clks[IMX7D_I2C4_ROOT_CLK] = imx_clk_gate2("i2c4_root_clk", "i2c4_post_div", base + 0x48b0, 0);
+ clks[IMX7D_UART1_ROOT_CLK] = imx_clk_gate2("uart1_root_clk", "uart1_post_div", base + 0x4940, 0);
+ clks[IMX7D_UART2_ROOT_CLK] = imx_clk_gate2("uart2_root_clk", "uart2_post_div", base + 0x4950, 0);
+ clks[IMX7D_UART3_ROOT_CLK] = imx_clk_gate2("uart3_root_clk", "uart3_post_div", base + 0x4960, 0);
+ clks[IMX7D_UART4_ROOT_CLK] = imx_clk_gate2("uart4_root_clk", "uart4_post_div", base + 0x4970, 0);
+ clks[IMX7D_UART5_ROOT_CLK] = imx_clk_gate2("uart5_root_clk", "uart5_post_div", base + 0x4980, 0);
+ clks[IMX7D_UART6_ROOT_CLK] = imx_clk_gate2("uart6_root_clk", "uart6_post_div", base + 0x4990, 0);
+ clks[IMX7D_UART7_ROOT_CLK] = imx_clk_gate2("uart7_root_clk", "uart7_post_div", base + 0x49a0, 0);
+ clks[IMX7D_ECSPI1_ROOT_CLK] = imx_clk_gate2("ecspi1_root_clk", "ecspi1_post_div", base + 0x4780, 0);
+ clks[IMX7D_ECSPI2_ROOT_CLK] = imx_clk_gate2("ecspi2_root_clk", "ecspi2_post_div", base + 0x4790, 0);
+ clks[IMX7D_ECSPI3_ROOT_CLK] = imx_clk_gate2("ecspi3_root_clk", "ecspi3_post_div", base + 0x47a0, 0);
+ clks[IMX7D_ECSPI4_ROOT_CLK] = imx_clk_gate2("ecspi4_root_clk", "ecspi4_post_div", base + 0x47b0, 0);
+ clks[IMX7D_PWM1_ROOT_CLK] = imx_clk_gate2("pwm1_root_clk", "pwm1_post_div", base + 0x4840, 0);
+ clks[IMX7D_PWM2_ROOT_CLK] = imx_clk_gate2("pwm2_root_clk", "pwm2_post_div", base + 0x4850, 0);
+ clks[IMX7D_PWM3_ROOT_CLK] = imx_clk_gate2("pwm3_root_clk", "pwm3_post_div", base + 0x4860, 0);
+ clks[IMX7D_PWM4_ROOT_CLK] = imx_clk_gate2("pwm4_root_clk", "pwm4_post_div", base + 0x4870, 0);
+ clks[IMX7D_FLEXTIMER1_ROOT_CLK] = imx_clk_gate2("flextimer1_root_clk", "flextimer1_post_div", base + 0x4800, 0);
+ clks[IMX7D_FLEXTIMER2_ROOT_CLK] = imx_clk_gate2("flextimer2_root_clk", "flextimer2_post_div", base + 0x4810, 0);
+ clks[IMX7D_SIM1_ROOT_CLK] = imx_clk_gate2("sim1_root_clk", "sim1_post_div", base + 0x4900, 0);
+ clks[IMX7D_SIM2_ROOT_CLK] = imx_clk_gate2("sim2_root_clk", "sim2_post_div", base + 0x4910, 0);
+ clks[IMX7D_GPT1_ROOT_CLK] = imx_clk_gate2("gpt1_root_clk", "gpt1_post_div", base + 0x47c0, 0);
+ clks[IMX7D_GPT2_ROOT_CLK] = imx_clk_gate2("gpt2_root_clk", "gpt2_post_div", base + 0x47d0, 0);
+ clks[IMX7D_GPT3_ROOT_CLK] = imx_clk_gate2("gpt3_root_clk", "gpt3_post_div", base + 0x47e0, 0);
+ clks[IMX7D_GPT4_ROOT_CLK] = imx_clk_gate2("gpt4_root_clk", "gpt4_post_div", base + 0x47f0, 0);
+ clks[IMX7D_TRACE_ROOT_CLK] = imx_clk_gate2("trace_root_clk", "trace_post_div", base + 0x4300, 0);
+ clks[IMX7D_WDOG1_ROOT_CLK] = imx_clk_gate2("wdog1_root_clk", "wdog_post_div", base + 0x49c0, 0);
+ clks[IMX7D_WDOG2_ROOT_CLK] = imx_clk_gate2("wdog2_root_clk", "wdog_post_div", base + 0x49d0, 0);
+ clks[IMX7D_WDOG3_ROOT_CLK] = imx_clk_gate2("wdog3_root_clk", "wdog_post_div", base + 0x49e0, 0);
+ clks[IMX7D_WDOG4_ROOT_CLK] = imx_clk_gate2("wdog4_root_clk", "wdog_post_div", base + 0x49f0, 0);
+ clks[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_gate2("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
+ clks[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_gate2("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
+ clks[IMX7D_WRCLK_ROOT_CLK] = imx_clk_gate2("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
+
+ clks[IMX7D_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX7D clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ /* TO BE FIXED LATER
+ * Enable all clock to bring up imx7, otherwise system will be halt and block
+ * the other part upstream Because imx7d clock design changed, clock framework
+ * need do a little modify.
+ * Dong Aisheng is working on this. After that, this part need be changed.
+ */
+ for (i = 0; i < IMX7D_CLK_END; i++)
+ clk_prepare_enable(clks[i]);
+
+ /* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
+ clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
+
+ /*
+ * init enet clock source:
+ * AXI clock source is 250MHz
+ * Phy refrence clock is 25MHz
+ * 1588 time clock source is 100MHz
+ */
+ clk_set_parent(clks[IMX7D_ENET_AXI_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_250M_CLK]);
+ clk_set_parent(clks[IMX7D_ENET_PHY_REF_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_25M_CLK]);
+ clk_set_parent(clks[IMX7D_ENET1_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]);
+ clk_set_parent(clks[IMX7D_ENET2_TIME_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]);
+
+ /* set uart module clock's parent clock source that must be great then 80MHz */
+ clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
+
+}
+CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/**
+ * struct clk_pfd - IMX PFD clock
+ * @clk_hw: clock source
+ * @reg: PFD register address
+ * @idx: the index of PFD encoded in the register
+ *
+ * PFD clock found on i.MX6 series. Each register for PFD has 4 clk_pfd
+ * data encoded, and member idx is used to specify the one. And each
+ * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
+ */
+struct clk_pfd {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 idx;
+};
+
+#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
+
+#define SET 0x4
+#define CLR 0x8
+#define OTG 0xc
+
+static int clk_pfd_enable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
+
+ return 0;
+}
+
+static void clk_pfd_disable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
+}
+
+static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ u64 tmp = *prate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+ tmp = *prate;
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+
+ writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
+ writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
+
+ return 0;
+}
+
+static int clk_pfd_is_enabled(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ if (readl_relaxed(pfd->reg) & (1 << ((pfd->idx + 1) * 8 - 1)))
+ return 0;
+
+ return 1;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+ .enable = clk_pfd_enable,
+ .disable = clk_pfd_disable,
+ .recalc_rate = clk_pfd_recalc_rate,
+ .round_rate = clk_pfd_round_rate,
+ .set_rate = clk_pfd_set_rate,
+ .is_enabled = clk_pfd_is_enabled,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx)
+{
+ struct clk_pfd *pfd;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+ if (!pfd)
+ return ERR_PTR(-ENOMEM);
+
+ pfd->reg = reg;
+ pfd->idx = idx;
+
+ init.name = name;
+ init.ops = &clk_pfd_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pfd->hw.init = &init;
+
+ clk = clk_register(NULL, &pfd->hw);
+ if (IS_ERR(clk))
+ kfree(pfd);
+
+ return clk;
+}
--- /dev/null
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+
+#include "clk.h"
+
+/**
+ * pll v1
+ *
+ * @clk_hw clock source
+ * @parent the parent clock name
+ * @base base address of pll registers
+ *
+ * PLL clock version 1, found on i.MX1/21/25/27/31/35
+ */
+
+#define MFN_BITS (10)
+#define MFN_SIGN (BIT(MFN_BITS - 1))
+#define MFN_MASK (MFN_SIGN - 1)
+
+struct clk_pllv1 {
+ struct clk_hw hw;
+ void __iomem *base;
+ enum imx_pllv1_type type;
+};
+
+#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk))
+
+static inline bool is_imx1_pllv1(struct clk_pllv1 *pll)
+{
+ return pll->type == IMX_PLLV1_IMX1;
+}
+
+static inline bool is_imx21_pllv1(struct clk_pllv1 *pll)
+{
+ return pll->type == IMX_PLLV1_IMX21;
+}
+
+static inline bool is_imx27_pllv1(struct clk_pllv1 *pll)
+{
+ return pll->type == IMX_PLLV1_IMX27;
+}
+
+static inline bool mfn_is_negative(struct clk_pllv1 *pll, unsigned int mfn)
+{
+ return !is_imx1_pllv1(pll) && !is_imx21_pllv1(pll) && (mfn & MFN_SIGN);
+}
+
+static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv1 *pll = to_clk_pllv1(hw);
+ long long ll;
+ int mfn_abs;
+ unsigned int mfi, mfn, mfd, pd;
+ u32 reg;
+ unsigned long rate;
+
+ reg = readl(pll->base);
+
+ /*
+ * Get the resulting clock rate from a PLL register value and the input
+ * frequency. PLLs with this register layout can be found on i.MX1,
+ * i.MX21, i.MX27 and i,MX31
+ *
+ * mfi + mfn / (mfd + 1)
+ * f = 2 * f_ref * --------------------
+ * pd + 1
+ */
+
+ mfi = (reg >> 10) & 0xf;
+ mfn = reg & 0x3ff;
+ mfd = (reg >> 16) & 0x3ff;
+ pd = (reg >> 26) & 0xf;
+
+ mfi = mfi <= 5 ? 5 : mfi;
+
+ mfn_abs = mfn;
+
+ /*
+ * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+ * 2's complements number.
+ * On i.MX27 the bit 9 is the sign bit.
+ */
+ if (mfn_is_negative(pll, mfn)) {
+ if (is_imx27_pllv1(pll))
+ mfn_abs = mfn & MFN_MASK;
+ else
+ mfn_abs = BIT(MFN_BITS) - mfn;
+ }
+
+ rate = parent_rate * 2;
+ rate /= pd + 1;
+
+ ll = (unsigned long long)rate * mfn_abs;
+
+ do_div(ll, mfd + 1);
+
+ if (mfn_is_negative(pll, mfn))
+ ll = -ll;
+
+ ll = (rate * mfi) + ll;
+
+ return ll;
+}
+
+static struct clk_ops clk_pllv1_ops = {
+ .recalc_rate = clk_pllv1_recalc_rate,
+};
+
+struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
+ const char *parent, void __iomem *base)
+{
+ struct clk_pllv1 *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kmalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base = base;
+ pll->type = type;
+
+ init.name = name;
+ init.ops = &clk_pllv1_ops;
+ init.flags = 0;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/div64.h>
+
+#include "clk.h"
+
+#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk))
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL 0x00
+#define MXC_PLL_DP_CONFIG 0x04
+#define MXC_PLL_DP_OP 0x08
+#define MXC_PLL_DP_MFD 0x0C
+#define MXC_PLL_DP_MFN 0x10
+#define MXC_PLL_DP_MFNMINUS 0x14
+#define MXC_PLL_DP_MFNPLUS 0x18
+#define MXC_PLL_DP_HFS_OP 0x1C
+#define MXC_PLL_DP_HFS_MFD 0x20
+#define MXC_PLL_DP_HFS_MFN 0x24
+#define MXC_PLL_DP_MFN_TOGC 0x28
+#define MXC_PLL_DP_DESTAT 0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
+#define MXC_PLL_DP_CTL_ADE 0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
+#define MXC_PLL_DP_CTL_HFSM 0x80
+#define MXC_PLL_DP_CTL_PRE 0x40
+#define MXC_PLL_DP_CTL_UPEN 0x20
+#define MXC_PLL_DP_CTL_RST 0x10
+#define MXC_PLL_DP_CTL_RCP 0x8
+#define MXC_PLL_DP_CTL_PLM 0x4
+#define MXC_PLL_DP_CTL_BRM0 0x2
+#define MXC_PLL_DP_CTL_LRF 0x1
+
+#define MXC_PLL_DP_CONFIG_BIST 0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
+#define MXC_PLL_DP_CONFIG_AREN 0x2
+#define MXC_PLL_DP_CONFIG_LDREQ 0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET 4
+#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET 0
+#define MXC_PLL_DP_OP_PDF_MASK 0xF
+
+#define MXC_PLL_DP_MFD_OFFSET 0
+#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET 0x0
+#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
+
+#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
+
+struct clk_pllv2 {
+ struct clk_hw hw;
+ void __iomem *base;
+};
+
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+ u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
+{
+ long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+ unsigned long dbl;
+ s64 temp;
+
+ dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ /* Sign extend to 32-bits */
+ if (mfn >= 0x04000000) {
+ mfn |= 0xFC000000;
+ mfn_abs = -mfn;
+ }
+
+ ref_clk = 2 * parent_rate;
+ if (dbl != 0)
+ ref_clk *= 2;
+
+ ref_clk /= (pdf + 1);
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd + 1);
+ if (mfn < 0)
+ temp = -temp;
+ temp = (ref_clk * mfi) + temp;
+
+ return temp;
+}
+
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+ void __iomem *pllbase;
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+ return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+ u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
+ u32 reg;
+ long mfi, pdf, mfn, mfd = 999999;
+ s64 temp64;
+ unsigned long quad_parent_rate;
+
+ quad_parent_rate = 4 * parent_rate;
+ pdf = mfi = -1;
+ while (++pdf < 16 && mfi < 5)
+ mfi = rate * (pdf+1) / quad_parent_rate;
+ if (mfi > 15)
+ return -EINVAL;
+ pdf--;
+
+ temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate / 1000000);
+ mfn = (long)temp64;
+
+ reg = mfi << 4 | pdf;
+
+ *dp_op = reg;
+ *dp_mfd = mfd;
+ *dp_mfn = mfn;
+
+ return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ void __iomem *pllbase;
+ u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+ int ret;
+
+ pllbase = pll->base;
+
+
+ ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+ if (ret)
+ return ret;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ /* use dpdck0_2 */
+ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+
+ __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
+
+ return 0;
+}
+
+static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ u32 dp_op, dp_mfd, dp_mfn;
+
+ __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+ return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+ dp_op, dp_mfd, dp_mfn);
+}
+
+static int clk_pllv2_prepare(struct clk_hw *hw)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+ int i = 0;
+
+ pllbase = pll->base;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_LRF)
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: pll locking failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void clk_pllv2_unprepare(struct clk_hw *hw)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+
+ pllbase = pll->base;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static struct clk_ops clk_pllv2_ops = {
+ .prepare = clk_pllv2_prepare,
+ .unprepare = clk_pllv2_unprepare,
+ .recalc_rate = clk_pllv2_recalc_rate,
+ .round_rate = clk_pllv2_round_rate,
+ .set_rate = clk_pllv2_set_rate,
+};
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+ void __iomem *base)
+{
+ struct clk_pllv2 *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base = base;
+
+ init.name = name;
+ init.ops = &clk_pllv2_ops;
+ init.flags = 0;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define PLL_NUM_OFFSET 0x10
+#define PLL_DENOM_OFFSET 0x20
+
+#define BM_PLL_POWER (0x1 << 12)
+#define BM_PLL_LOCK (0x1 << 31)
+#define IMX7_ENET_PLL_POWER (0x1 << 5)
+
+/**
+ * struct clk_pllv3 - IMX PLL clock version 3
+ * @clk_hw: clock source
+ * @base: base address of PLL registers
+ * @powerup_set: set POWER bit to power up the PLL
+ * @powerdown: pll powerdown offset bit
+ * @div_mask: mask of divider bits
+ * @div_shift: shift of divider bits
+ *
+ * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3
+ * is actually a multiplier, and always sits at bit 0.
+ */
+struct clk_pllv3 {
+ struct clk_hw hw;
+ void __iomem *base;
+ bool powerup_set;
+ u32 powerdown;
+ u32 div_mask;
+ u32 div_shift;
+};
+
+#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+
+static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ u32 val = readl_relaxed(pll->base) & pll->powerdown;
+
+ /* No need to wait for lock when pll is not powered up */
+ if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
+ return 0;
+
+ /* Wait for PLL to lock */
+ do {
+ if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ break;
+ if (time_after(jiffies, timeout))
+ break;
+ usleep_range(50, 500);
+ } while (1);
+
+ return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT;
+}
+
+static int clk_pllv3_prepare(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ if (pll->powerup_set)
+ val |= BM_PLL_POWER;
+ else
+ val &= ~BM_PLL_POWER;
+ writel_relaxed(val, pll->base);
+
+ return clk_pllv3_wait_lock(pll);
+}
+
+static void clk_pllv3_unprepare(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ if (pll->powerup_set)
+ val &= ~BM_PLL_POWER;
+ else
+ val |= BM_PLL_POWER;
+ writel_relaxed(val, pll->base);
+}
+
+static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask;
+
+ return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+
+ return (rate >= parent_rate * 22) ? parent_rate * 22 :
+ parent_rate * 20;
+}
+
+static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val, div;
+
+ if (rate == parent_rate * 22)
+ div = 1;
+ else if (rate == parent_rate * 20)
+ div = 0;
+ else
+ return -EINVAL;
+
+ val = readl_relaxed(pll->base);
+ val &= ~(pll->div_mask << pll->div_shift);
+ val |= (div << pll->div_shift);
+ writel_relaxed(val, pll->base);
+
+ return clk_pllv3_wait_lock(pll);
+}
+
+static const struct clk_ops clk_pllv3_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .recalc_rate = clk_pllv3_recalc_rate,
+ .round_rate = clk_pllv3_round_rate,
+ .set_rate = clk_pllv3_set_rate,
+};
+
+static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return parent_rate * div / 2;
+}
+
+static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ unsigned long min_rate = parent_rate * 54 / 2;
+ unsigned long max_rate = parent_rate * 108 / 2;
+ u32 div;
+
+ if (rate > max_rate)
+ rate = max_rate;
+ else if (rate < min_rate)
+ rate = min_rate;
+ div = rate * 2 / parent_rate;
+
+ return parent_rate * div / 2;
+}
+
+static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long min_rate = parent_rate * 54 / 2;
+ unsigned long max_rate = parent_rate * 108 / 2;
+ u32 val, div;
+
+ if (rate < min_rate || rate > max_rate)
+ return -EINVAL;
+
+ div = rate * 2 / parent_rate;
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+
+ return clk_pllv3_wait_lock(pll);
+}
+
+static const struct clk_ops clk_pllv3_sys_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .recalc_rate = clk_pllv3_sys_recalc_rate,
+ .round_rate = clk_pllv3_sys_round_rate,
+ .set_rate = clk_pllv3_sys_set_rate,
+};
+
+static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
+ u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ unsigned long min_rate = parent_rate * 27;
+ unsigned long max_rate = parent_rate * 54;
+ u32 div;
+ u32 mfn, mfd = 1000000;
+ u64 temp64;
+
+ if (rate > max_rate)
+ rate = max_rate;
+ else if (rate < min_rate)
+ rate = min_rate;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ return parent_rate * div + parent_rate / mfd * mfn;
+}
+
+static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long min_rate = parent_rate * 27;
+ unsigned long max_rate = parent_rate * 54;
+ u32 val, div;
+ u32 mfn, mfd = 1000000;
+ u64 temp64;
+
+ if (rate < min_rate || rate > max_rate)
+ return -EINVAL;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+ writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
+ writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+
+ return clk_pllv3_wait_lock(pll);
+}
+
+static const struct clk_ops clk_pllv3_av_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .recalc_rate = clk_pllv3_av_recalc_rate,
+ .round_rate = clk_pllv3_av_round_rate,
+ .set_rate = clk_pllv3_av_set_rate,
+};
+
+static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 500000000;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .recalc_rate = clk_pllv3_enet_recalc_rate,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base,
+ u32 div_mask)
+{
+ struct clk_pllv3 *pll;
+ const struct clk_ops *ops;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->powerdown = BM_PLL_POWER;
+
+ switch (type) {
+ case IMX_PLLV3_SYS:
+ ops = &clk_pllv3_sys_ops;
+ break;
+ case IMX_PLLV3_USB_VF610:
+ pll->div_shift = 1;
+ case IMX_PLLV3_USB:
+ ops = &clk_pllv3_ops;
+ pll->powerup_set = true;
+ break;
+ case IMX_PLLV3_AV:
+ ops = &clk_pllv3_av_ops;
+ break;
+ case IMX_PLLV3_ENET_IMX7:
+ pll->powerdown = IMX7_ENET_PLL_POWER;
+ case IMX_PLLV3_ENET:
+ ops = &clk_pllv3_enet_ops;
+ break;
+ default:
+ ops = &clk_pllv3_ops;
+ }
+ pll->base = base;
+ pll->div_mask = div_mask;
+
+ init.name = name;
+ init.ops = ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <dt-bindings/clock/vf610-clock.h>
+
+#include "clk.h"
+
+#define CCM_CCR (ccm_base + 0x00)
+#define CCM_CSR (ccm_base + 0x04)
+#define CCM_CCSR (ccm_base + 0x08)
+#define CCM_CACRR (ccm_base + 0x0c)
+#define CCM_CSCMR1 (ccm_base + 0x10)
+#define CCM_CSCDR1 (ccm_base + 0x14)
+#define CCM_CSCDR2 (ccm_base + 0x18)
+#define CCM_CSCDR3 (ccm_base + 0x1c)
+#define CCM_CSCMR2 (ccm_base + 0x20)
+#define CCM_CSCDR4 (ccm_base + 0x24)
+#define CCM_CLPCR (ccm_base + 0x2c)
+#define CCM_CISR (ccm_base + 0x30)
+#define CCM_CIMR (ccm_base + 0x34)
+#define CCM_CGPR (ccm_base + 0x3c)
+#define CCM_CCGR0 (ccm_base + 0x40)
+#define CCM_CCGR1 (ccm_base + 0x44)
+#define CCM_CCGR2 (ccm_base + 0x48)
+#define CCM_CCGR3 (ccm_base + 0x4c)
+#define CCM_CCGR4 (ccm_base + 0x50)
+#define CCM_CCGR5 (ccm_base + 0x54)
+#define CCM_CCGR6 (ccm_base + 0x58)
+#define CCM_CCGR7 (ccm_base + 0x5c)
+#define CCM_CCGR8 (ccm_base + 0x60)
+#define CCM_CCGR9 (ccm_base + 0x64)
+#define CCM_CCGR10 (ccm_base + 0x68)
+#define CCM_CCGR11 (ccm_base + 0x6c)
+#define CCM_CMEOR0 (ccm_base + 0x70)
+#define CCM_CMEOR1 (ccm_base + 0x74)
+#define CCM_CMEOR2 (ccm_base + 0x78)
+#define CCM_CMEOR3 (ccm_base + 0x7c)
+#define CCM_CMEOR4 (ccm_base + 0x80)
+#define CCM_CMEOR5 (ccm_base + 0x84)
+#define CCM_CPPDSR (ccm_base + 0x88)
+#define CCM_CCOWR (ccm_base + 0x8c)
+#define CCM_CCPGR0 (ccm_base + 0x90)
+#define CCM_CCPGR1 (ccm_base + 0x94)
+#define CCM_CCPGR2 (ccm_base + 0x98)
+#define CCM_CCPGR3 (ccm_base + 0x9c)
+
+#define CCM_CCGRx_CGn(n) ((n) * 2)
+
+#define PFD_PLL1_BASE (anatop_base + 0x2b0)
+#define PFD_PLL2_BASE (anatop_base + 0x100)
+#define PFD_PLL3_BASE (anatop_base + 0xf0)
+#define PLL1_CTRL (anatop_base + 0x270)
+#define PLL2_CTRL (anatop_base + 0x30)
+#define PLL3_CTRL (anatop_base + 0x10)
+#define PLL4_CTRL (anatop_base + 0x70)
+#define PLL5_CTRL (anatop_base + 0xe0)
+#define PLL6_CTRL (anatop_base + 0xa0)
+#define PLL7_CTRL (anatop_base + 0x20)
+#define ANA_MISC1 (anatop_base + 0x160)
+
+static void __iomem *anatop_base;
+static void __iomem *ccm_base;
+
+/* sources for multiplexer clocks, this is used multiple times */
+static const char *fast_sels[] = { "firc", "fxosc", };
+static const char *slow_sels[] = { "sirc_32k", "sxosc", };
+static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
+static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
+static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
+static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
+static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
+static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
+static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
+static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
+/* FTM counter clock source, not module clock */
+static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
+static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
+
+
+static struct clk_div_table pll4_audio_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 6 },
+ { .val = 3, .div = 8 },
+ { .val = 4, .div = 10 },
+ { .val = 5, .div = 12 },
+ { .val = 6, .div = 14 },
+ { .val = 7, .div = 16 },
+ { }
+};
+
+static struct clk *clk[VF610_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static unsigned int const clks_init_on[] __initconst = {
+ VF610_CLK_SYS_BUS,
+ VF610_CLK_DDR_SEL,
+ VF610_CLK_DAP,
+};
+
+static struct clk * __init vf610_get_fixed_clock(
+ struct device_node *ccm_node, const char *name)
+{
+ struct clk *clk = of_clk_get_by_name(ccm_node, name);
+
+ /* Backward compatibility if device tree is missing clks assignments */
+ if (IS_ERR(clk))
+ clk = imx_obtain_fixed_clock(name, 0);
+ return clk;
+};
+
+static void __init vf610_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ int i;
+
+ clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000);
+ clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000);
+ clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000);
+
+ clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc");
+ clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc");
+ clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext");
+ clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext");
+
+ /* Clock source from external clock via LVDs PAD */
+ clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1");
+
+ clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop");
+ anatop_base = of_iomap(np, 0);
+ BUG_ON(!anatop_base);
+
+ np = ccm_node;
+ ccm_base = of_iomap(np, 0);
+ BUG_ON(!ccm_base);
+
+ clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
+ clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
+
+ clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
+ clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
+ clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x2);
+ clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
+ clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
+ clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
+ clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x2);
+
+ clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
+ clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
+ clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
+ clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
+ clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
+ clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
+ clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
+
+ clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
+ clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
+ clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
+ clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
+ clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
+ clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
+ clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
+
+ clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
+
+ clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
+ clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
+ clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
+ clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
+
+ clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
+ clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
+ clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
+ clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
+
+ clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
+ clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
+ clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
+ clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
+
+ clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
+ clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
+ clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels));
+ clk[VF610_CLK_DDR_SEL] = imx_clk_mux("ddr_sel", CCM_CCSR, 6, 1, ddr_sels, ARRAY_SIZE(ddr_sels));
+ clk[VF610_CLK_SYS_BUS] = imx_clk_divider("sys_bus", "sys_sel", CCM_CACRR, 0, 3);
+ clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
+ clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
+
+ clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
+ clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
+ clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
+
+ clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
+ clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
+
+ clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
+
+ clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4);
+ clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4);
+ clk[VF610_CLK_QSPI0_X4_DIV] = imx_clk_divider("qspi0_x4", "qspi0_en", CCM_CSCDR3, 0, 2);
+ clk[VF610_CLK_QSPI0_X2_DIV] = imx_clk_divider("qspi0_x2", "qspi0_x4", CCM_CSCDR3, 2, 1);
+ clk[VF610_CLK_QSPI0_X1_DIV] = imx_clk_divider("qspi0_x1", "qspi0_x2", CCM_CSCDR3, 3, 1);
+ clk[VF610_CLK_QSPI0] = imx_clk_gate2("qspi0", "qspi0_x1", CCM_CCGR2, CCM_CCGRx_CGn(4));
+
+ clk[VF610_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", CCM_CSCMR1, 24, 2, qspi_sels, 4);
+ clk[VF610_CLK_QSPI1_EN] = imx_clk_gate("qspi1_en", "qspi1_sel", CCM_CSCDR3, 12);
+ clk[VF610_CLK_QSPI1_X4_DIV] = imx_clk_divider("qspi1_x4", "qspi1_en", CCM_CSCDR3, 8, 2);
+ clk[VF610_CLK_QSPI1_X2_DIV] = imx_clk_divider("qspi1_x2", "qspi1_x4", CCM_CSCDR3, 10, 1);
+ clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
+ clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
+
+ clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
+ clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
+ clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
+ clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
+ clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
+ clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
+ clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
+
+ clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
+
+ clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7));
+ clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8));
+ clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9));
+ clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10));
+ clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9));
+ clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10));
+
+ clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6));
+ clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7));
+ clk[VF610_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(6));
+ clk[VF610_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_bus", CCM_CCGR10, CCM_CCGRx_CGn(7));
+
+ clk[VF610_CLK_DSPI0] = imx_clk_gate2("dspi0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(12));
+ clk[VF610_CLK_DSPI1] = imx_clk_gate2("dspi1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(13));
+ clk[VF610_CLK_DSPI2] = imx_clk_gate2("dspi2", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(12));
+ clk[VF610_CLK_DSPI3] = imx_clk_gate2("dspi3", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(13));
+
+ clk[VF610_CLK_WDT] = imx_clk_gate2("wdt", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(14));
+
+ clk[VF610_CLK_ESDHC0_SEL] = imx_clk_mux("esdhc0_sel", CCM_CSCMR1, 16, 2, esdhc_sels, 4);
+ clk[VF610_CLK_ESDHC0_EN] = imx_clk_gate("esdhc0_en", "esdhc0_sel", CCM_CSCDR2, 28);
+ clk[VF610_CLK_ESDHC0_DIV] = imx_clk_divider("esdhc0_div", "esdhc0_en", CCM_CSCDR2, 16, 4);
+ clk[VF610_CLK_ESDHC0] = imx_clk_gate2("eshc0", "esdhc0_div", CCM_CCGR7, CCM_CCGRx_CGn(1));
+
+ clk[VF610_CLK_ESDHC1_SEL] = imx_clk_mux("esdhc1_sel", CCM_CSCMR1, 18, 2, esdhc_sels, 4);
+ clk[VF610_CLK_ESDHC1_EN] = imx_clk_gate("esdhc1_en", "esdhc1_sel", CCM_CSCDR2, 29);
+ clk[VF610_CLK_ESDHC1_DIV] = imx_clk_divider("esdhc1_div", "esdhc1_en", CCM_CSCDR2, 20, 4);
+ clk[VF610_CLK_ESDHC1] = imx_clk_gate2("eshc1", "esdhc1_div", CCM_CCGR7, CCM_CCGRx_CGn(2));
+
+ /*
+ * ftm_ext_clk and ftm_fix_clk are FTM timer counter's
+ * selectable clock sources, both use a common enable bit
+ * in CCM_CSCDR1, selecting "dummy" clock as parent of
+ * "ftm0_ext_fix" make it serve only for enable/disable.
+ */
+ clk[VF610_CLK_FTM0_EXT_SEL] = imx_clk_mux("ftm0_ext_sel", CCM_CSCMR2, 6, 2, ftm_ext_sels, 4);
+ clk[VF610_CLK_FTM0_FIX_SEL] = imx_clk_mux("ftm0_fix_sel", CCM_CSCMR2, 14, 1, ftm_fix_sels, 2);
+ clk[VF610_CLK_FTM0_EXT_FIX_EN] = imx_clk_gate("ftm0_ext_fix_en", "dummy", CCM_CSCDR1, 25);
+ clk[VF610_CLK_FTM1_EXT_SEL] = imx_clk_mux("ftm1_ext_sel", CCM_CSCMR2, 8, 2, ftm_ext_sels, 4);
+ clk[VF610_CLK_FTM1_FIX_SEL] = imx_clk_mux("ftm1_fix_sel", CCM_CSCMR2, 15, 1, ftm_fix_sels, 2);
+ clk[VF610_CLK_FTM1_EXT_FIX_EN] = imx_clk_gate("ftm1_ext_fix_en", "dummy", CCM_CSCDR1, 26);
+ clk[VF610_CLK_FTM2_EXT_SEL] = imx_clk_mux("ftm2_ext_sel", CCM_CSCMR2, 10, 2, ftm_ext_sels, 4);
+ clk[VF610_CLK_FTM2_FIX_SEL] = imx_clk_mux("ftm2_fix_sel", CCM_CSCMR2, 16, 1, ftm_fix_sels, 2);
+ clk[VF610_CLK_FTM2_EXT_FIX_EN] = imx_clk_gate("ftm2_ext_fix_en", "dummy", CCM_CSCDR1, 27);
+ clk[VF610_CLK_FTM3_EXT_SEL] = imx_clk_mux("ftm3_ext_sel", CCM_CSCMR2, 12, 2, ftm_ext_sels, 4);
+ clk[VF610_CLK_FTM3_FIX_SEL] = imx_clk_mux("ftm3_fix_sel", CCM_CSCMR2, 17, 1, ftm_fix_sels, 2);
+ clk[VF610_CLK_FTM3_EXT_FIX_EN] = imx_clk_gate("ftm3_ext_fix_en", "dummy", CCM_CSCDR1, 28);
+
+ /* ftm(n)_clk are FTM module operation clock */
+ clk[VF610_CLK_FTM0] = imx_clk_gate2("ftm0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(8));
+ clk[VF610_CLK_FTM1] = imx_clk_gate2("ftm1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(9));
+ clk[VF610_CLK_FTM2] = imx_clk_gate2("ftm2", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(8));
+ clk[VF610_CLK_FTM3] = imx_clk_gate2("ftm3", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(9));
+
+ clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2);
+ clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19);
+ clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3);
+ clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8));
+ clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2);
+ clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23);
+ clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3);
+ clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8));
+
+ clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4);
+ clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30);
+ clk[VF610_CLK_ESAI_DIV] = imx_clk_divider("esai_div", "esai_en", CCM_CSCDR2, 24, 4);
+ clk[VF610_CLK_ESAI] = imx_clk_gate2("esai", "esai_div", CCM_CCGR4, CCM_CCGRx_CGn(2));
+
+ clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4);
+ clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16);
+ clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4);
+ clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15));
+
+ clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4);
+ clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17);
+ clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4);
+ clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0));
+
+ clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4);
+ clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18);
+ clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4);
+ clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1));
+
+ clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4);
+ clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19);
+ clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4);
+ clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2));
+
+ clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4);
+ clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9);
+ clk[VF610_CLK_NFC_PRE_DIV] = imx_clk_divider("nfc_pre_div", "nfc_en", CCM_CSCDR3, 13, 3);
+ clk[VF610_CLK_NFC_FRAC_DIV] = imx_clk_divider("nfc_frac_div", "nfc_pre_div", CCM_CSCDR2, 4, 4);
+ clk[VF610_CLK_NFC] = imx_clk_gate2("nfc", "nfc_frac_div", CCM_CCGR10, CCM_CCGRx_CGn(0));
+
+ clk[VF610_CLK_GPU_SEL] = imx_clk_mux("gpu_sel", CCM_CSCMR1, 14, 1, gpu_sels, 2);
+ clk[VF610_CLK_GPU_EN] = imx_clk_gate("gpu_en", "gpu_sel", CCM_CSCDR2, 10);
+ clk[VF610_CLK_GPU2D] = imx_clk_gate2("gpu", "gpu_en", CCM_CCGR8, CCM_CCGRx_CGn(15));
+
+ clk[VF610_CLK_VADC_SEL] = imx_clk_mux("vadc_sel", CCM_CSCMR1, 8, 2, vadc_sels, 3);
+ clk[VF610_CLK_VADC_EN] = imx_clk_gate("vadc_en", "vadc_sel", CCM_CSCDR1, 22);
+ clk[VF610_CLK_VADC_DIV] = imx_clk_divider("vadc_div", "vadc_en", CCM_CSCDR1, 20, 2);
+ clk[VF610_CLK_VADC_DIV_HALF] = imx_clk_fixed_factor("vadc_div_half", "vadc_div", 1, 2);
+ clk[VF610_CLK_VADC] = imx_clk_gate2("vadc", "vadc_div", CCM_CCGR8, CCM_CCGRx_CGn(7));
+
+ clk[VF610_CLK_ADC0] = imx_clk_gate2("adc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(11));
+ clk[VF610_CLK_ADC1] = imx_clk_gate2("adc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(11));
+ clk[VF610_CLK_DAC0] = imx_clk_gate2("dac0", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(12));
+ clk[VF610_CLK_DAC1] = imx_clk_gate2("dac1", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(13));
+
+ clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1));
+
+ clk[VF610_CLK_FLEXCAN0_EN] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11);
+ clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_FLEXCAN1_EN] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12);
+ clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4));
+
+ clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5));
+ clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1));
+ clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
+
+ clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7));
+ clk[VF610_CLK_DAP] = imx_clk_gate("dap", "platform_bus", CCM_CCSR, 24);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]);
+ clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2);
+ clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2);
+ clk_set_rate(clk[VF610_CLK_QSPI0_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X2_DIV]) / 2);
+
+ clk_set_parent(clk[VF610_CLK_QSPI1_SEL], clk[VF610_CLK_PLL1_PFD4]);
+ clk_set_rate(clk[VF610_CLK_QSPI1_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_SEL]) / 2);
+ clk_set_rate(clk[VF610_CLK_QSPI1_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X4_DIV]) / 2);
+ clk_set_rate(clk[VF610_CLK_QSPI1_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X2_DIV]) / 2);
+
+ clk_set_parent(clk[VF610_CLK_SAI0_SEL], clk[VF610_CLK_AUDIO_EXT]);
+ clk_set_parent(clk[VF610_CLK_SAI1_SEL], clk[VF610_CLK_AUDIO_EXT]);
+ clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]);
+ clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]);
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
+
+ /* Add the clocks to provider list */
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(vf610, "fsl,vf610-ccm", vf610_clocks_init);
--- /dev/null
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "clk.h"
+
+DEFINE_SPINLOCK(imx_ccm_lock);
+
+void __init imx_check_clocks(struct clk *clks[], unsigned int count)
+{
+ unsigned i;
+
+ for (i = 0; i < count; i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX clk %u: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+}
+
+static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
+{
+ struct of_phandle_args phandle;
+ struct clk *clk = ERR_PTR(-ENODEV);
+ char *path;
+
+ path = kasprintf(GFP_KERNEL, "/clocks/%s", name);
+ if (!path)
+ return ERR_PTR(-ENOMEM);
+
+ phandle.np = of_find_node_by_path(path);
+ kfree(path);
+
+ if (phandle.np) {
+ clk = of_clk_get_from_provider(&phandle);
+ of_node_put(phandle.np);
+ }
+ return clk;
+}
+
+struct clk * __init imx_obtain_fixed_clock(
+ const char *name, unsigned long rate)
+{
+ struct clk *clk;
+
+ clk = imx_obtain_fixed_clock_from_dt(name);
+ if (IS_ERR(clk))
+ clk = imx_clk_fixed(name, rate);
+ return clk;
+}
+
+/*
+ * This fixups the register CCM_CSCMR1 write value.
+ * The write/read/divider values of the aclk_podf field
+ * of that register have the relationship described by
+ * the following table:
+ *
+ * write value read value divider
+ * 3b'000 3b'110 7
+ * 3b'001 3b'111 8
+ * 3b'010 3b'100 5
+ * 3b'011 3b'101 6
+ * 3b'100 3b'010 3
+ * 3b'101 3b'011 4
+ * 3b'110 3b'000 1
+ * 3b'111 3b'001 2(default)
+ *
+ * That's why we do the xor operation below.
+ */
+#define CSCMR1_FIXUP 0x00600000
+
+void imx_cscmr1_fixup(u32 *val)
+{
+ *val ^= CSCMR1_FIXUP;
+ return;
+}
--- /dev/null
+#ifndef __MACH_IMX_CLK_H
+#define __MACH_IMX_CLK_H
+
+#include <linux/spinlock.h>
+#include <linux/clk-provider.h>
+
+extern spinlock_t imx_ccm_lock;
+
+void imx_check_clocks(struct clk *clks[], unsigned int count);
+
+extern void imx_cscmr1_fixup(u32 *val);
+
+enum imx_pllv1_type {
+ IMX_PLLV1_IMX1,
+ IMX_PLLV1_IMX21,
+ IMX_PLLV1_IMX25,
+ IMX_PLLV1_IMX27,
+ IMX_PLLV1_IMX31,
+ IMX_PLLV1_IMX35,
+};
+
+struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
+ const char *parent, void __iomem *base);
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+ void __iomem *base);
+
+enum imx_pllv3_type {
+ IMX_PLLV3_GENERIC,
+ IMX_PLLV3_SYS,
+ IMX_PLLV3_USB,
+ IMX_PLLV3_USB_VF610,
+ IMX_PLLV3_AV,
+ IMX_PLLV3_ENET,
+ IMX_PLLV3_ENET_IMX7,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base, u32 div_mask);
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock,
+ unsigned int *share_count);
+
+struct clk * imx_obtain_fixed_clock(
+ const char *name, unsigned long rate);
+
+struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u32 exclusive_mask);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock, NULL);
+}
+
+static inline struct clk *imx_clk_gate2_shared(const char *name,
+ const char *parent, void __iomem *reg, u8 shift,
+ unsigned int *share_count)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock, share_count);
+}
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx);
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift);
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ const char **parent_names, int num_parents);
+
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width,
+ void (*fixup)(u32 *val));
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parents,
+ int num_parents, void (*fixup)(u32 *val));
+
+static inline struct clk *imx_clk_fixed(const char *name, int rate)
+{
+ return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *imx_clk_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width)
+{
+ return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_divider_flags(const char *name,
+ const char *parent, void __iomem *reg, u8 shift, u8 width,
+ unsigned long flags)
+{
+ return clk_register_divider(NULL, name, parent, flags,
+ reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_gate(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parents, int num_parents)
+{
+ return clk_register_mux(NULL, name, parents, num_parents,
+ CLK_SET_RATE_NO_REPARENT, reg, shift,
+ width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux_flags(const char *name,
+ void __iomem *reg, u8 shift, u8 width, const char **parents,
+ int num_parents, unsigned long flags)
+{
+ return clk_register_mux(NULL, name, parents, num_parents,
+ flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0,
+ &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_fixed_factor(const char *name,
+ const char *parent, unsigned int mult, unsigned int div)
+{
+ return clk_register_fixed_factor(NULL, name, parent,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+struct clk *imx_clk_cpu(const char *name, const char *parent_name,
+ struct clk *div, struct clk *mux, struct clk *pll,
+ struct clk *step);
+
+#endif
PARENTS(clk_pxa27x_memory) = { "osc_13mhz", "system_bus", "run" };
MUX_RO_RATE_RO_OPS(clk_pxa27x_memory, "memory");
+#define DUMMY_CLK(_con_id, _dev_id, _parent) \
+ { .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
+struct dummy_clk {
+ const char *con_id;
+ const char *dev_id;
+ const char *parent;
+};
+static struct dummy_clk dummy_clks[] __initdata = {
+ DUMMY_CLK(NULL, "pxa27x-gpio", "osc_32_768khz"),
+ DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
+ DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
+};
+
+static void __init pxa27x_dummy_clocks_init(void)
+{
+ struct clk *clk;
+ struct dummy_clk *d;
+ const char *name;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
+ d = &dummy_clks[i];
+ name = d->dev_id ? d->dev_id : d->con_id;
+ clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
+ clk_register_clkdev(clk, d->con_id, d->dev_id);
+ }
+}
+
static void __init pxa27x_base_clocks_init(void)
{
pxa27x_register_plls();
clk_register_clk_pxa27x_lcd_base();
}
-static int __init pxa27x_clocks_init(void)
+int __init pxa27x_clocks_init(void)
{
pxa27x_base_clocks_init();
+ pxa27x_dummy_clocks_init();
return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks));
}
-postcore_initcall(pxa27x_clocks_init);
static void __init pxa27x_dt_clocks_init(struct device_node *np)
{
--- /dev/null
+obj-y := clk-pll.o
+obj-$(CONFIG_SOC_ZX296702) += clk-zx296702.o
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "clk.h"
+
+#define to_clk_zx_pll(_hw) container_of(_hw, struct clk_zx_pll, hw)
+
+#define CFG0_CFG1_OFFSET 4
+#define LOCK_FLAG BIT(30)
+#define POWER_DOWN BIT(31)
+
+static int rate_to_idx(struct clk_zx_pll *zx_pll, unsigned long rate)
+{
+ const struct zx_pll_config *config = zx_pll->lookup_table;
+ int i;
+
+ for (i = 0; i < zx_pll->count; i++) {
+ if (config[i].rate > rate)
+ return i > 0 ? i - 1 : 0;
+
+ if (config[i].rate == rate)
+ return i;
+ }
+
+ return i - 1;
+}
+
+static int hw_to_idx(struct clk_zx_pll *zx_pll)
+{
+ const struct zx_pll_config *config = zx_pll->lookup_table;
+ u32 hw_cfg0, hw_cfg1;
+ int i;
+
+ hw_cfg0 = readl_relaxed(zx_pll->reg_base);
+ hw_cfg1 = readl_relaxed(zx_pll->reg_base + CFG0_CFG1_OFFSET);
+
+ /* For matching the value in lookup table */
+ hw_cfg0 &= ~LOCK_FLAG;
+ hw_cfg0 |= POWER_DOWN;
+
+ for (i = 0; i < zx_pll->count; i++) {
+ if (hw_cfg0 == config[i].cfg0 && hw_cfg1 == config[i].cfg1)
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static unsigned long zx_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+ int idx;
+
+ idx = hw_to_idx(zx_pll);
+ if (unlikely(idx == -EINVAL))
+ return 0;
+
+ return zx_pll->lookup_table[idx].rate;
+}
+
+static long zx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+ int idx;
+
+ idx = rate_to_idx(zx_pll, rate);
+
+ return zx_pll->lookup_table[idx].rate;
+}
+
+static int zx_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /* Assume current cpu is not running on current PLL */
+ struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+ const struct zx_pll_config *config;
+ int idx;
+
+ idx = rate_to_idx(zx_pll, rate);
+ config = &zx_pll->lookup_table[idx];
+
+ writel_relaxed(config->cfg0, zx_pll->reg_base);
+ writel_relaxed(config->cfg1, zx_pll->reg_base + CFG0_CFG1_OFFSET);
+
+ return 0;
+}
+
+static int zx_pll_enable(struct clk_hw *hw)
+{
+ struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+ u32 reg;
+
+ reg = readl_relaxed(zx_pll->reg_base);
+ writel_relaxed(reg & ~POWER_DOWN, zx_pll->reg_base);
+
+ return readl_relaxed_poll_timeout(zx_pll->reg_base, reg,
+ reg & LOCK_FLAG, 0, 100);
+}
+
+static void zx_pll_disable(struct clk_hw *hw)
+{
+ struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+ u32 reg;
+
+ reg = readl_relaxed(zx_pll->reg_base);
+ writel_relaxed(reg | POWER_DOWN, zx_pll->reg_base);
+}
+
+static int zx_pll_is_enabled(struct clk_hw *hw)
+{
+ struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+ u32 reg;
+
+ reg = readl_relaxed(zx_pll->reg_base);
+
+ return !(reg & POWER_DOWN);
+}
+
+static const struct clk_ops zx_pll_ops = {
+ .recalc_rate = zx_pll_recalc_rate,
+ .round_rate = zx_pll_round_rate,
+ .set_rate = zx_pll_set_rate,
+ .enable = zx_pll_enable,
+ .disable = zx_pll_disable,
+ .is_enabled = zx_pll_is_enabled,
+};
+
+struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg_base,
+ const struct zx_pll_config *lookup_table, int count, spinlock_t *lock)
+{
+ struct clk_zx_pll *zx_pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ zx_pll = kzalloc(sizeof(*zx_pll), GFP_KERNEL);
+ if (!zx_pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &zx_pll_ops;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ zx_pll->reg_base = reg_base;
+ zx_pll->lookup_table = lookup_table;
+ zx_pll->count = count;
+ zx_pll->lock = lock;
+ zx_pll->hw.init = &init;
+
+ clk = clk_register(NULL, &zx_pll->hw);
+ if (IS_ERR(clk))
+ kfree(zx_pll);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/zx296702-clock.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(reg_lock);
+
+static void __iomem *topcrm_base;
+static void __iomem *lsp0crpm_base;
+static void __iomem *lsp1crpm_base;
+
+static struct clk *topclk[ZX296702_TOPCLK_END];
+static struct clk *lsp0clk[ZX296702_LSP0CLK_END];
+static struct clk *lsp1clk[ZX296702_LSP1CLK_END];
+
+static struct clk_onecell_data topclk_data;
+static struct clk_onecell_data lsp0clk_data;
+static struct clk_onecell_data lsp1clk_data;
+
+#define CLK_MUX (topcrm_base + 0x04)
+#define CLK_DIV (topcrm_base + 0x08)
+#define CLK_EN0 (topcrm_base + 0x0c)
+#define CLK_EN1 (topcrm_base + 0x10)
+#define VOU_LOCAL_CLKEN (topcrm_base + 0x68)
+#define VOU_LOCAL_CLKSEL (topcrm_base + 0x70)
+#define VOU_LOCAL_DIV2_SET (topcrm_base + 0x74)
+#define CLK_MUX1 (topcrm_base + 0x8c)
+
+#define CLK_SDMMC1 (lsp0crpm_base + 0x0c)
+
+#define CLK_UART0 (lsp1crpm_base + 0x20)
+#define CLK_UART1 (lsp1crpm_base + 0x24)
+#define CLK_SDMMC0 (lsp1crpm_base + 0x2c)
+
+static const struct zx_pll_config pll_a9_config[] = {
+ { .rate = 700000000, .cfg0 = 0x800405d1, .cfg1 = 0x04555555 },
+ { .rate = 800000000, .cfg0 = 0x80040691, .cfg1 = 0x04aaaaaa },
+ { .rate = 900000000, .cfg0 = 0x80040791, .cfg1 = 0x04000000 },
+ { .rate = 1000000000, .cfg0 = 0x80040851, .cfg1 = 0x04555555 },
+ { .rate = 1100000000, .cfg0 = 0x80040911, .cfg1 = 0x04aaaaaa },
+ { .rate = 1200000000, .cfg0 = 0x80040a11, .cfg1 = 0x04000000 },
+};
+
+static const struct clk_div_table main_hlk_div[] = {
+ { .val = 1, .div = 2, },
+ { .val = 3, .div = 4, },
+ { /* sentinel */ }
+};
+
+static const struct clk_div_table a9_as1_aclk_divider[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 3, .div = 4, },
+ { /* sentinel */ }
+};
+
+static const struct clk_div_table sec_wclk_divider[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 3, .div = 4, },
+ { .val = 5, .div = 6, },
+ { .val = 7, .div = 8, },
+ { /* sentinel */ }
+};
+
+static const char * matrix_aclk_sel[] = {
+ "pll_mm0_198M",
+ "osc",
+ "clk_148M5",
+ "pll_lsp_104M",
+};
+
+static const char * a9_wclk_sel[] = {
+ "pll_a9",
+ "osc",
+ "clk_500",
+ "clk_250",
+};
+
+static const char * a9_as1_aclk_sel[] = {
+ "clk_250",
+ "osc",
+ "pll_mm0_396M",
+ "pll_mac_333M",
+};
+
+static const char * a9_trace_clkin_sel[] = {
+ "clk_74M25",
+ "pll_mm1_108M",
+ "clk_125",
+ "clk_148M5",
+};
+
+static const char * decppu_aclk_sel[] = {
+ "clk_250",
+ "pll_mm0_198M",
+ "pll_lsp_104M",
+ "pll_audio_294M912",
+};
+
+static const char * vou_main_wclk_sel[] = {
+ "clk_148M5",
+ "clk_74M25",
+ "clk_27",
+ "pll_mm1_54M",
+};
+
+static const char * vou_scaler_wclk_sel[] = {
+ "clk_250",
+ "pll_mac_333M",
+ "pll_audio_294M912",
+ "pll_mm0_198M",
+};
+
+static const char * r2d_wclk_sel[] = {
+ "pll_audio_294M912",
+ "pll_mac_333M",
+ "pll_a9_350M",
+ "pll_mm0_396M",
+};
+
+static const char * ddr_wclk_sel[] = {
+ "pll_mac_333M",
+ "pll_ddr_266M",
+ "pll_audio_294M912",
+ "pll_mm0_198M",
+};
+
+static const char * nand_wclk_sel[] = {
+ "pll_lsp_104M",
+ "osc",
+};
+
+static const char * lsp_26_wclk_sel[] = {
+ "pll_lsp_26M",
+ "osc",
+};
+
+static const char * vl0_sel[] = {
+ "vou_main_channel_div",
+ "vou_aux_channel_div",
+};
+
+static const char * hdmi_sel[] = {
+ "vou_main_channel_wclk",
+ "vou_aux_channel_wclk",
+};
+
+static const char * sdmmc0_wclk_sel[] = {
+ "lsp1_104M_wclk",
+ "lsp1_26M_wclk",
+};
+
+static const char * sdmmc1_wclk_sel[] = {
+ "lsp0_104M_wclk",
+ "lsp0_26M_wclk",
+};
+
+static const char * uart_wclk_sel[] = {
+ "lsp1_104M_wclk",
+ "lsp1_26M_wclk",
+};
+
+static inline struct clk *zx_divtbl(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width,
+ const struct clk_div_table *table)
+{
+ return clk_register_divider_table(NULL, name, parent, 0, reg, shift,
+ width, 0, table, ®_lock);
+}
+
+static inline struct clk *zx_div(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width)
+{
+ return clk_register_divider(NULL, name, parent, 0,
+ reg, shift, width, 0, ®_lock);
+}
+
+static inline struct clk *zx_mux(const char *name, const char **parents,
+ int num_parents, void __iomem *reg, u8 shift, u8 width)
+{
+ return clk_register_mux(NULL, name, parents, num_parents,
+ 0, reg, shift, width, 0, ®_lock);
+}
+
+static inline struct clk *zx_gate(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_IGNORE_UNUSED,
+ reg, shift, 0, ®_lock);
+}
+
+static void __init zx296702_top_clocks_init(struct device_node *np)
+{
+ struct clk **clk = topclk;
+ int i;
+
+ topcrm_base = of_iomap(np, 0);
+ WARN_ON(!topcrm_base);
+
+ clk[ZX296702_OSC] =
+ clk_register_fixed_rate(NULL, "osc", NULL, CLK_IS_ROOT,
+ 30000000);
+ clk[ZX296702_PLL_A9] =
+ clk_register_zx_pll("pll_a9", "osc", 0, topcrm_base
+ + 0x01c, pll_a9_config,
+ ARRAY_SIZE(pll_a9_config), ®_lock);
+
+ /* TODO: pll_a9_350M look like changeble follow a9 pll */
+ clk[ZX296702_PLL_A9_350M] =
+ clk_register_fixed_rate(NULL, "pll_a9_350M", "osc", 0,
+ 350000000);
+ clk[ZX296702_PLL_MAC_1000M] =
+ clk_register_fixed_rate(NULL, "pll_mac_1000M", "osc", 0,
+ 1000000000);
+ clk[ZX296702_PLL_MAC_333M] =
+ clk_register_fixed_rate(NULL, "pll_mac_333M", "osc", 0,
+ 333000000);
+ clk[ZX296702_PLL_MM0_1188M] =
+ clk_register_fixed_rate(NULL, "pll_mm0_1188M", "osc", 0,
+ 1188000000);
+ clk[ZX296702_PLL_MM0_396M] =
+ clk_register_fixed_rate(NULL, "pll_mm0_396M", "osc", 0,
+ 396000000);
+ clk[ZX296702_PLL_MM0_198M] =
+ clk_register_fixed_rate(NULL, "pll_mm0_198M", "osc", 0,
+ 198000000);
+ clk[ZX296702_PLL_MM1_108M] =
+ clk_register_fixed_rate(NULL, "pll_mm1_108M", "osc", 0,
+ 108000000);
+ clk[ZX296702_PLL_MM1_72M] =
+ clk_register_fixed_rate(NULL, "pll_mm1_72M", "osc", 0,
+ 72000000);
+ clk[ZX296702_PLL_MM1_54M] =
+ clk_register_fixed_rate(NULL, "pll_mm1_54M", "osc", 0,
+ 54000000);
+ clk[ZX296702_PLL_LSP_104M] =
+ clk_register_fixed_rate(NULL, "pll_lsp_104M", "osc", 0,
+ 104000000);
+ clk[ZX296702_PLL_LSP_26M] =
+ clk_register_fixed_rate(NULL, "pll_lsp_26M", "osc", 0,
+ 26000000);
+ clk[ZX296702_PLL_DDR_266M] =
+ clk_register_fixed_rate(NULL, "pll_ddr_266M", "osc", 0,
+ 266000000);
+ clk[ZX296702_PLL_AUDIO_294M912] =
+ clk_register_fixed_rate(NULL, "pll_audio_294M912", "osc", 0,
+ 294912000);
+
+ /* bus clock */
+ clk[ZX296702_MATRIX_ACLK] =
+ zx_mux("matrix_aclk", matrix_aclk_sel,
+ ARRAY_SIZE(matrix_aclk_sel), CLK_MUX, 2, 2);
+ clk[ZX296702_MAIN_HCLK] =
+ zx_divtbl("main_hclk", "matrix_aclk", CLK_DIV, 0, 2,
+ main_hlk_div);
+ clk[ZX296702_MAIN_PCLK] =
+ zx_divtbl("main_pclk", "matrix_aclk", CLK_DIV, 2, 2,
+ main_hlk_div);
+
+ /* cpu clock */
+ clk[ZX296702_CLK_500] =
+ clk_register_fixed_factor(NULL, "clk_500", "pll_mac_1000M", 0,
+ 1, 2);
+ clk[ZX296702_CLK_250] =
+ clk_register_fixed_factor(NULL, "clk_250", "pll_mac_1000M", 0,
+ 1, 4);
+ clk[ZX296702_CLK_125] =
+ clk_register_fixed_factor(NULL, "clk_125", "clk_250", 0, 1, 2);
+ clk[ZX296702_CLK_148M5] =
+ clk_register_fixed_factor(NULL, "clk_148M5", "pll_mm0_1188M", 0,
+ 1, 8);
+ clk[ZX296702_CLK_74M25] =
+ clk_register_fixed_factor(NULL, "clk_74M25", "pll_mm0_1188M", 0,
+ 1, 16);
+ clk[ZX296702_A9_WCLK] =
+ zx_mux("a9_wclk", a9_wclk_sel, ARRAY_SIZE(a9_wclk_sel), CLK_MUX,
+ 0, 2);
+ clk[ZX296702_A9_AS1_ACLK_MUX] =
+ zx_mux("a9_as1_aclk_mux", a9_as1_aclk_sel,
+ ARRAY_SIZE(a9_as1_aclk_sel), CLK_MUX, 4, 2);
+ clk[ZX296702_A9_TRACE_CLKIN_MUX] =
+ zx_mux("a9_trace_clkin_mux", a9_trace_clkin_sel,
+ ARRAY_SIZE(a9_trace_clkin_sel), CLK_MUX1, 0, 2);
+ clk[ZX296702_A9_AS1_ACLK_DIV] =
+ zx_divtbl("a9_as1_aclk_div", "a9_as1_aclk_mux", CLK_DIV, 4, 2,
+ a9_as1_aclk_divider);
+
+ /* multi-media clock */
+ clk[ZX296702_CLK_2] =
+ clk_register_fixed_factor(NULL, "clk_2", "pll_mm1_72M", 0,
+ 1, 36);
+ clk[ZX296702_CLK_27] =
+ clk_register_fixed_factor(NULL, "clk_27", "pll_mm1_54M", 0,
+ 1, 2);
+ clk[ZX296702_DECPPU_ACLK_MUX] =
+ zx_mux("decppu_aclk_mux", decppu_aclk_sel,
+ ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 6, 2);
+ clk[ZX296702_PPU_ACLK_MUX] =
+ zx_mux("ppu_aclk_mux", decppu_aclk_sel,
+ ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 8, 2);
+ clk[ZX296702_MALI400_ACLK_MUX] =
+ zx_mux("mali400_aclk_mux", decppu_aclk_sel,
+ ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 12, 2);
+ clk[ZX296702_VOU_ACLK_MUX] =
+ zx_mux("vou_aclk_mux", decppu_aclk_sel,
+ ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 10, 2);
+ clk[ZX296702_VOU_MAIN_WCLK_MUX] =
+ zx_mux("vou_main_wclk_mux", vou_main_wclk_sel,
+ ARRAY_SIZE(vou_main_wclk_sel), CLK_MUX, 14, 2);
+ clk[ZX296702_VOU_AUX_WCLK_MUX] =
+ zx_mux("vou_aux_wclk_mux", vou_main_wclk_sel,
+ ARRAY_SIZE(vou_main_wclk_sel), CLK_MUX, 16, 2);
+ clk[ZX296702_VOU_SCALER_WCLK_MUX] =
+ zx_mux("vou_scaler_wclk_mux", vou_scaler_wclk_sel,
+ ARRAY_SIZE(vou_scaler_wclk_sel), CLK_MUX,
+ 18, 2);
+ clk[ZX296702_R2D_ACLK_MUX] =
+ zx_mux("r2d_aclk_mux", decppu_aclk_sel,
+ ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 20, 2);
+ clk[ZX296702_R2D_WCLK_MUX] =
+ zx_mux("r2d_wclk_mux", r2d_wclk_sel,
+ ARRAY_SIZE(r2d_wclk_sel), CLK_MUX, 22, 2);
+
+ /* other clock */
+ clk[ZX296702_CLK_50] =
+ clk_register_fixed_factor(NULL, "clk_50", "pll_mac_1000M",
+ 0, 1, 20);
+ clk[ZX296702_CLK_25] =
+ clk_register_fixed_factor(NULL, "clk_25", "pll_mac_1000M",
+ 0, 1, 40);
+ clk[ZX296702_CLK_12] =
+ clk_register_fixed_factor(NULL, "clk_12", "pll_mm1_72M",
+ 0, 1, 6);
+ clk[ZX296702_CLK_16M384] =
+ clk_register_fixed_factor(NULL, "clk_16M384",
+ "pll_audio_294M912", 0, 1, 18);
+ clk[ZX296702_CLK_32K768] =
+ clk_register_fixed_factor(NULL, "clk_32K768", "clk_16M384",
+ 0, 1, 500);
+ clk[ZX296702_SEC_WCLK_DIV] =
+ zx_divtbl("sec_wclk_div", "pll_lsp_104M", CLK_DIV, 6, 3,
+ sec_wclk_divider);
+ clk[ZX296702_DDR_WCLK_MUX] =
+ zx_mux("ddr_wclk_mux", ddr_wclk_sel,
+ ARRAY_SIZE(ddr_wclk_sel), CLK_MUX, 24, 2);
+ clk[ZX296702_NAND_WCLK_MUX] =
+ zx_mux("nand_wclk_mux", nand_wclk_sel,
+ ARRAY_SIZE(nand_wclk_sel), CLK_MUX, 24, 2);
+ clk[ZX296702_LSP_26_WCLK_MUX] =
+ zx_mux("lsp_26_wclk_mux", lsp_26_wclk_sel,
+ ARRAY_SIZE(lsp_26_wclk_sel), CLK_MUX, 27, 1);
+
+ /* gates */
+ clk[ZX296702_A9_AS0_ACLK] =
+ zx_gate("a9_as0_aclk", "matrix_aclk", CLK_EN0, 0);
+ clk[ZX296702_A9_AS1_ACLK] =
+ zx_gate("a9_as1_aclk", "a9_as1_aclk_div", CLK_EN0, 1);
+ clk[ZX296702_A9_TRACE_CLKIN] =
+ zx_gate("a9_trace_clkin", "a9_trace_clkin_mux", CLK_EN0, 2);
+ clk[ZX296702_DECPPU_AXI_M_ACLK] =
+ zx_gate("decppu_axi_m_aclk", "decppu_aclk_mux", CLK_EN0, 3);
+ clk[ZX296702_DECPPU_AHB_S_HCLK] =
+ zx_gate("decppu_ahb_s_hclk", "main_hclk", CLK_EN0, 4);
+ clk[ZX296702_PPU_AXI_M_ACLK] =
+ zx_gate("ppu_axi_m_aclk", "ppu_aclk_mux", CLK_EN0, 5);
+ clk[ZX296702_PPU_AHB_S_HCLK] =
+ zx_gate("ppu_ahb_s_hclk", "main_hclk", CLK_EN0, 6);
+ clk[ZX296702_VOU_AXI_M_ACLK] =
+ zx_gate("vou_axi_m_aclk", "vou_aclk_mux", CLK_EN0, 7);
+ clk[ZX296702_VOU_APB_PCLK] =
+ zx_gate("vou_apb_pclk", "main_pclk", CLK_EN0, 8);
+ clk[ZX296702_VOU_MAIN_CHANNEL_WCLK] =
+ zx_gate("vou_main_channel_wclk", "vou_main_wclk_mux",
+ CLK_EN0, 9);
+ clk[ZX296702_VOU_AUX_CHANNEL_WCLK] =
+ zx_gate("vou_aux_channel_wclk", "vou_aux_wclk_mux",
+ CLK_EN0, 10);
+ clk[ZX296702_VOU_HDMI_OSCLK_CEC] =
+ zx_gate("vou_hdmi_osclk_cec", "clk_2", CLK_EN0, 11);
+ clk[ZX296702_VOU_SCALER_WCLK] =
+ zx_gate("vou_scaler_wclk", "vou_scaler_wclk_mux", CLK_EN0, 12);
+ clk[ZX296702_MALI400_AXI_M_ACLK] =
+ zx_gate("mali400_axi_m_aclk", "mali400_aclk_mux", CLK_EN0, 13);
+ clk[ZX296702_MALI400_APB_PCLK] =
+ zx_gate("mali400_apb_pclk", "main_pclk", CLK_EN0, 14);
+ clk[ZX296702_R2D_WCLK] =
+ zx_gate("r2d_wclk", "r2d_wclk_mux", CLK_EN0, 15);
+ clk[ZX296702_R2D_AXI_M_ACLK] =
+ zx_gate("r2d_axi_m_aclk", "r2d_aclk_mux", CLK_EN0, 16);
+ clk[ZX296702_R2D_AHB_HCLK] =
+ zx_gate("r2d_ahb_hclk", "main_hclk", CLK_EN0, 17);
+ clk[ZX296702_DDR3_AXI_S0_ACLK] =
+ zx_gate("ddr3_axi_s0_aclk", "matrix_aclk", CLK_EN0, 18);
+ clk[ZX296702_DDR3_APB_PCLK] =
+ zx_gate("ddr3_apb_pclk", "main_pclk", CLK_EN0, 19);
+ clk[ZX296702_DDR3_WCLK] =
+ zx_gate("ddr3_wclk", "ddr_wclk_mux", CLK_EN0, 20);
+ clk[ZX296702_USB20_0_AHB_HCLK] =
+ zx_gate("usb20_0_ahb_hclk", "main_hclk", CLK_EN0, 21);
+ clk[ZX296702_USB20_0_EXTREFCLK] =
+ zx_gate("usb20_0_extrefclk", "clk_12", CLK_EN0, 22);
+ clk[ZX296702_USB20_1_AHB_HCLK] =
+ zx_gate("usb20_1_ahb_hclk", "main_hclk", CLK_EN0, 23);
+ clk[ZX296702_USB20_1_EXTREFCLK] =
+ zx_gate("usb20_1_extrefclk", "clk_12", CLK_EN0, 24);
+ clk[ZX296702_USB20_2_AHB_HCLK] =
+ zx_gate("usb20_2_ahb_hclk", "main_hclk", CLK_EN0, 25);
+ clk[ZX296702_USB20_2_EXTREFCLK] =
+ zx_gate("usb20_2_extrefclk", "clk_12", CLK_EN0, 26);
+ clk[ZX296702_GMAC_AXI_M_ACLK] =
+ zx_gate("gmac_axi_m_aclk", "matrix_aclk", CLK_EN0, 27);
+ clk[ZX296702_GMAC_APB_PCLK] =
+ zx_gate("gmac_apb_pclk", "main_pclk", CLK_EN0, 28);
+ clk[ZX296702_GMAC_125_CLKIN] =
+ zx_gate("gmac_125_clkin", "clk_125", CLK_EN0, 29);
+ clk[ZX296702_GMAC_RMII_CLKIN] =
+ zx_gate("gmac_rmii_clkin", "clk_50", CLK_EN0, 30);
+ clk[ZX296702_GMAC_25M_CLK] =
+ zx_gate("gmac_25M_clk", "clk_25", CLK_EN0, 31);
+ clk[ZX296702_NANDFLASH_AHB_HCLK] =
+ zx_gate("nandflash_ahb_hclk", "main_hclk", CLK_EN1, 0);
+ clk[ZX296702_NANDFLASH_WCLK] =
+ zx_gate("nandflash_wclk", "nand_wclk_mux", CLK_EN1, 1);
+ clk[ZX296702_LSP0_APB_PCLK] =
+ zx_gate("lsp0_apb_pclk", "main_pclk", CLK_EN1, 2);
+ clk[ZX296702_LSP0_AHB_HCLK] =
+ zx_gate("lsp0_ahb_hclk", "main_hclk", CLK_EN1, 3);
+ clk[ZX296702_LSP0_26M_WCLK] =
+ zx_gate("lsp0_26M_wclk", "lsp_26_wclk_mux", CLK_EN1, 4);
+ clk[ZX296702_LSP0_104M_WCLK] =
+ zx_gate("lsp0_104M_wclk", "pll_lsp_104M", CLK_EN1, 5);
+ clk[ZX296702_LSP0_16M384_WCLK] =
+ zx_gate("lsp0_16M384_wclk", "clk_16M384", CLK_EN1, 6);
+ clk[ZX296702_LSP1_APB_PCLK] =
+ zx_gate("lsp1_apb_pclk", "main_pclk", CLK_EN1, 7);
+ /* FIXME: wclk enable bit is bit8. We hack it as reserved 31 for
+ * UART does not work after parent clk is disabled/enabled */
+ clk[ZX296702_LSP1_26M_WCLK] =
+ zx_gate("lsp1_26M_wclk", "lsp_26_wclk_mux", CLK_EN1, 31);
+ clk[ZX296702_LSP1_104M_WCLK] =
+ zx_gate("lsp1_104M_wclk", "pll_lsp_104M", CLK_EN1, 9);
+ clk[ZX296702_LSP1_32K_CLK] =
+ zx_gate("lsp1_32K_clk", "clk_32K768", CLK_EN1, 10);
+ clk[ZX296702_AON_HCLK] =
+ zx_gate("aon_hclk", "main_hclk", CLK_EN1, 11);
+ clk[ZX296702_SYS_CTRL_PCLK] =
+ zx_gate("sys_ctrl_pclk", "main_pclk", CLK_EN1, 12);
+ clk[ZX296702_DMA_PCLK] =
+ zx_gate("dma_pclk", "main_pclk", CLK_EN1, 13);
+ clk[ZX296702_DMA_ACLK] =
+ zx_gate("dma_aclk", "matrix_aclk", CLK_EN1, 14);
+ clk[ZX296702_SEC_HCLK] =
+ zx_gate("sec_hclk", "main_hclk", CLK_EN1, 15);
+ clk[ZX296702_AES_WCLK] =
+ zx_gate("aes_wclk", "sec_wclk_div", CLK_EN1, 16);
+ clk[ZX296702_DES_WCLK] =
+ zx_gate("des_wclk", "sec_wclk_div", CLK_EN1, 17);
+ clk[ZX296702_IRAM_ACLK] =
+ zx_gate("iram_aclk", "matrix_aclk", CLK_EN1, 18);
+ clk[ZX296702_IROM_ACLK] =
+ zx_gate("irom_aclk", "matrix_aclk", CLK_EN1, 19);
+ clk[ZX296702_BOOT_CTRL_HCLK] =
+ zx_gate("boot_ctrl_hclk", "main_hclk", CLK_EN1, 20);
+ clk[ZX296702_EFUSE_CLK_30] =
+ zx_gate("efuse_clk_30", "osc", CLK_EN1, 21);
+
+ /* TODO: add VOU Local clocks */
+ clk[ZX296702_VOU_MAIN_CHANNEL_DIV] =
+ zx_div("vou_main_channel_div", "vou_main_channel_wclk",
+ VOU_LOCAL_DIV2_SET, 1, 1);
+ clk[ZX296702_VOU_AUX_CHANNEL_DIV] =
+ zx_div("vou_aux_channel_div", "vou_aux_channel_wclk",
+ VOU_LOCAL_DIV2_SET, 0, 1);
+ clk[ZX296702_VOU_TV_ENC_HD_DIV] =
+ zx_div("vou_tv_enc_hd_div", "vou_tv_enc_hd_mux",
+ VOU_LOCAL_DIV2_SET, 3, 1);
+ clk[ZX296702_VOU_TV_ENC_SD_DIV] =
+ zx_div("vou_tv_enc_sd_div", "vou_tv_enc_sd_mux",
+ VOU_LOCAL_DIV2_SET, 2, 1);
+ clk[ZX296702_VL0_MUX] =
+ zx_mux("vl0_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+ VOU_LOCAL_CLKSEL, 8, 1);
+ clk[ZX296702_VL1_MUX] =
+ zx_mux("vl1_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+ VOU_LOCAL_CLKSEL, 9, 1);
+ clk[ZX296702_VL2_MUX] =
+ zx_mux("vl2_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+ VOU_LOCAL_CLKSEL, 10, 1);
+ clk[ZX296702_GL0_MUX] =
+ zx_mux("gl0_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+ VOU_LOCAL_CLKSEL, 5, 1);
+ clk[ZX296702_GL1_MUX] =
+ zx_mux("gl1_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+ VOU_LOCAL_CLKSEL, 6, 1);
+ clk[ZX296702_GL2_MUX] =
+ zx_mux("gl2_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+ VOU_LOCAL_CLKSEL, 7, 1);
+ clk[ZX296702_WB_MUX] =
+ zx_mux("wb_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+ VOU_LOCAL_CLKSEL, 11, 1);
+ clk[ZX296702_HDMI_MUX] =
+ zx_mux("hdmi_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+ VOU_LOCAL_CLKSEL, 4, 1);
+ clk[ZX296702_VOU_TV_ENC_HD_MUX] =
+ zx_mux("vou_tv_enc_hd_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+ VOU_LOCAL_CLKSEL, 3, 1);
+ clk[ZX296702_VOU_TV_ENC_SD_MUX] =
+ zx_mux("vou_tv_enc_sd_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+ VOU_LOCAL_CLKSEL, 2, 1);
+ clk[ZX296702_VL0_CLK] =
+ zx_gate("vl0_clk", "vl0_mux", VOU_LOCAL_CLKEN, 8);
+ clk[ZX296702_VL1_CLK] =
+ zx_gate("vl1_clk", "vl1_mux", VOU_LOCAL_CLKEN, 9);
+ clk[ZX296702_VL2_CLK] =
+ zx_gate("vl2_clk", "vl2_mux", VOU_LOCAL_CLKEN, 10);
+ clk[ZX296702_GL0_CLK] =
+ zx_gate("gl0_clk", "gl0_mux", VOU_LOCAL_CLKEN, 5);
+ clk[ZX296702_GL1_CLK] =
+ zx_gate("gl1_clk", "gl1_mux", VOU_LOCAL_CLKEN, 6);
+ clk[ZX296702_GL2_CLK] =
+ zx_gate("gl2_clk", "gl2_mux", VOU_LOCAL_CLKEN, 7);
+ clk[ZX296702_WB_CLK] =
+ zx_gate("wb_clk", "wb_mux", VOU_LOCAL_CLKEN, 11);
+ clk[ZX296702_CL_CLK] =
+ zx_gate("cl_clk", "vou_main_channel_div", VOU_LOCAL_CLKEN, 12);
+ clk[ZX296702_MAIN_MIX_CLK] =
+ zx_gate("main_mix_clk", "vou_main_channel_div",
+ VOU_LOCAL_CLKEN, 4);
+ clk[ZX296702_AUX_MIX_CLK] =
+ zx_gate("aux_mix_clk", "vou_aux_channel_div",
+ VOU_LOCAL_CLKEN, 3);
+ clk[ZX296702_HDMI_CLK] =
+ zx_gate("hdmi_clk", "hdmi_mux", VOU_LOCAL_CLKEN, 2);
+ clk[ZX296702_VOU_TV_ENC_HD_DAC_CLK] =
+ zx_gate("vou_tv_enc_hd_dac_clk", "vou_tv_enc_hd_div",
+ VOU_LOCAL_CLKEN, 1);
+ clk[ZX296702_VOU_TV_ENC_SD_DAC_CLK] =
+ zx_gate("vou_tv_enc_sd_dac_clk", "vou_tv_enc_sd_div",
+ VOU_LOCAL_CLKEN, 0);
+
+ /* CA9 PERIPHCLK = a9_wclk / 2 */
+ clk[ZX296702_A9_PERIPHCLK] =
+ clk_register_fixed_factor(NULL, "a9_periphclk", "a9_wclk",
+ 0, 1, 2);
+
+ for (i = 0; i < ARRAY_SIZE(topclk); i++) {
+ if (IS_ERR(clk[i])) {
+ pr_err("zx296702 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+ return;
+ }
+ }
+
+ topclk_data.clks = topclk;
+ topclk_data.clk_num = ARRAY_SIZE(topclk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &topclk_data);
+}
+CLK_OF_DECLARE(zx296702_top_clk, "zte,zx296702-topcrm-clk",
+ zx296702_top_clocks_init);
+
+static void __init zx296702_lsp0_clocks_init(struct device_node *np)
+{
+ struct clk **clk = lsp0clk;
+ int i;
+
+ lsp0crpm_base = of_iomap(np, 0);
+ WARN_ON(!lsp0crpm_base);
+
+ /* SDMMC1 */
+ clk[ZX296702_SDMMC1_WCLK_MUX] =
+ zx_mux("sdmmc1_wclk_mux", sdmmc1_wclk_sel,
+ ARRAY_SIZE(sdmmc1_wclk_sel), CLK_SDMMC1, 4, 1);
+ clk[ZX296702_SDMMC1_WCLK_DIV] =
+ zx_div("sdmmc1_wclk_div", "sdmmc1_wclk_mux", CLK_SDMMC1, 12, 4);
+ clk[ZX296702_SDMMC1_WCLK] =
+ zx_gate("sdmmc1_wclk", "sdmmc1_wclk_div", CLK_SDMMC1, 1);
+ clk[ZX296702_SDMMC1_PCLK] =
+ zx_gate("sdmmc1_pclk", "lsp1_apb_pclk", CLK_SDMMC1, 0);
+
+ for (i = 0; i < ARRAY_SIZE(lsp0clk); i++) {
+ if (IS_ERR(clk[i])) {
+ pr_err("zx296702 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+ return;
+ }
+ }
+
+ lsp0clk_data.clks = lsp0clk;
+ lsp0clk_data.clk_num = ARRAY_SIZE(lsp0clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &lsp0clk_data);
+}
+CLK_OF_DECLARE(zx296702_lsp0_clk, "zte,zx296702-lsp0crpm-clk",
+ zx296702_lsp0_clocks_init);
+
+static void __init zx296702_lsp1_clocks_init(struct device_node *np)
+{
+ struct clk **clk = lsp1clk;
+ int i;
+
+ lsp1crpm_base = of_iomap(np, 0);
+ WARN_ON(!lsp1crpm_base);
+
+ /* UART0 */
+ clk[ZX296702_UART0_WCLK_MUX] =
+ zx_mux("uart0_wclk_mux", uart_wclk_sel,
+ ARRAY_SIZE(uart_wclk_sel), CLK_UART0, 4, 1);
+ /* FIXME: uart wclk enable bit is bit1 in. We hack it as reserved 31 for
+ * UART does not work after parent clk is disabled/enabled */
+ clk[ZX296702_UART0_WCLK] =
+ zx_gate("uart0_wclk", "uart0_wclk_mux", CLK_UART0, 31);
+ clk[ZX296702_UART0_PCLK] =
+ zx_gate("uart0_pclk", "lsp1_apb_pclk", CLK_UART0, 0);
+
+ /* UART1 */
+ clk[ZX296702_UART1_WCLK_MUX] =
+ zx_mux("uart1_wclk_mux", uart_wclk_sel,
+ ARRAY_SIZE(uart_wclk_sel), CLK_UART1, 4, 1);
+ clk[ZX296702_UART1_WCLK] =
+ zx_gate("uart1_wclk", "uart1_wclk_mux", CLK_UART1, 1);
+ clk[ZX296702_UART1_PCLK] =
+ zx_gate("uart1_pclk", "lsp1_apb_pclk", CLK_UART1, 0);
+
+ /* SDMMC0 */
+ clk[ZX296702_SDMMC0_WCLK_MUX] =
+ zx_mux("sdmmc0_wclk_mux", sdmmc0_wclk_sel,
+ ARRAY_SIZE(sdmmc0_wclk_sel), CLK_SDMMC0, 4, 1);
+ clk[ZX296702_SDMMC0_WCLK_DIV] =
+ zx_div("sdmmc0_wclk_div", "sdmmc0_wclk_mux", CLK_SDMMC0, 12, 4);
+ clk[ZX296702_SDMMC0_WCLK] =
+ zx_gate("sdmmc0_wclk", "sdmmc0_wclk_div", CLK_SDMMC0, 1);
+ clk[ZX296702_SDMMC0_PCLK] =
+ zx_gate("sdmmc0_pclk", "lsp1_apb_pclk", CLK_SDMMC0, 0);
+
+ for (i = 0; i < ARRAY_SIZE(lsp1clk); i++) {
+ if (IS_ERR(clk[i])) {
+ pr_err("zx296702 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+ return;
+ }
+ }
+
+ lsp1clk_data.clks = lsp1clk;
+ lsp1clk_data.clk_num = ARRAY_SIZE(lsp1clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &lsp1clk_data);
+}
+CLK_OF_DECLARE(zx296702_lsp1_clk, "zte,zx296702-lsp1crpm-clk",
+ zx296702_lsp1_clocks_init);
--- /dev/null
+/*
+ * Copyright 2015 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ZTE_CLK_H
+#define __ZTE_CLK_H
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+struct zx_pll_config {
+ unsigned long rate;
+ u32 cfg0;
+ u32 cfg1;
+};
+
+struct clk_zx_pll {
+ struct clk_hw hw;
+ void __iomem *reg_base;
+ const struct zx_pll_config *lookup_table; /* order by rate asc */
+ int count;
+ spinlock_t *lock;
+};
+
+struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
+ unsigned long flags, void __iomem *reg_base,
+ const struct zx_pll_config *lookup_table, int count, spinlock_t *lock);
+#endif
help
This enables OST0 support available on PXA and SA-11x0
platforms.
+
+config CLKSRC_IMX_GPT
+ bool "Clocksource using i.MX GPT" if COMPILE_TEST
+ depends on ARM && CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+
endmenu
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
+obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o
obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
--- /dev/null
+/*
+ * linux/arch/arm/plat-mxc/time.c
+ *
+ * Copyright (C) 2000-2001 Deep Blue Solutions
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <soc/imx/timer.h>
+
+/*
+ * There are 4 versions of the timer hardware on Freescale MXC hardware.
+ * - MX1/MXL
+ * - MX21, MX27.
+ * - MX25, MX31, MX35, MX37, MX51, MX6Q(rev1.0)
+ * - MX6DL, MX6SX, MX6Q(rev1.1+)
+ */
+
+/* defines common for all i.MX */
+#define MXC_TCTL 0x00
+#define MXC_TCTL_TEN (1 << 0) /* Enable module */
+#define MXC_TPRER 0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
+#define MX1_2_TCTL_IRQEN (1 << 4)
+#define MX1_2_TCTL_FRR (1 << 8)
+#define MX1_2_TCMP 0x08
+#define MX1_2_TCN 0x10
+#define MX1_2_TSTAT 0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT (1 << 1)
+#define MX2_TSTAT_COMP (1 << 0)
+
+/* MX31, MX35, MX25, MX5, MX6 */
+#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
+#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
+#define V2_TCTL_CLK_OSC_DIV8 (5 << 6)
+#define V2_TCTL_FRR (1 << 9)
+#define V2_TCTL_24MEN (1 << 10)
+#define V2_TPRER_PRE24M 12
+#define V2_IR 0x0c
+#define V2_TSTAT 0x08
+#define V2_TSTAT_OF1 (1 << 0)
+#define V2_TCN 0x24
+#define V2_TCMP 0x10
+
+#define V2_TIMER_RATE_OSC_DIV8 3000000
+
+struct imx_timer {
+ enum imx_gpt_type type;
+ void __iomem *base;
+ int irq;
+ struct clk *clk_per;
+ struct clk *clk_ipg;
+ const struct imx_gpt_data *gpt;
+ struct clock_event_device ced;
+ enum clock_event_mode cem;
+ struct irqaction act;
+};
+
+struct imx_gpt_data {
+ int reg_tstat;
+ int reg_tcn;
+ int reg_tcmp;
+ void (*gpt_setup_tctl)(struct imx_timer *imxtm);
+ void (*gpt_irq_enable)(struct imx_timer *imxtm);
+ void (*gpt_irq_disable)(struct imx_timer *imxtm);
+ void (*gpt_irq_acknowledge)(struct imx_timer *imxtm);
+ int (*set_next_event)(unsigned long evt,
+ struct clock_event_device *ced);
+};
+
+static inline struct imx_timer *to_imx_timer(struct clock_event_device *ced)
+{
+ return container_of(ced, struct imx_timer, ced);
+}
+
+static void imx1_gpt_irq_disable(struct imx_timer *imxtm)
+{
+ unsigned int tmp;
+
+ tmp = readl_relaxed(imxtm->base + MXC_TCTL);
+ writel_relaxed(tmp & ~MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
+}
+#define imx21_gpt_irq_disable imx1_gpt_irq_disable
+
+static void imx31_gpt_irq_disable(struct imx_timer *imxtm)
+{
+ writel_relaxed(0, imxtm->base + V2_IR);
+}
+#define imx6dl_gpt_irq_disable imx31_gpt_irq_disable
+
+static void imx1_gpt_irq_enable(struct imx_timer *imxtm)
+{
+ unsigned int tmp;
+
+ tmp = readl_relaxed(imxtm->base + MXC_TCTL);
+ writel_relaxed(tmp | MX1_2_TCTL_IRQEN, imxtm->base + MXC_TCTL);
+}
+#define imx21_gpt_irq_enable imx1_gpt_irq_enable
+
+static void imx31_gpt_irq_enable(struct imx_timer *imxtm)
+{
+ writel_relaxed(1<<0, imxtm->base + V2_IR);
+}
+#define imx6dl_gpt_irq_enable imx31_gpt_irq_enable
+
+static void imx1_gpt_irq_acknowledge(struct imx_timer *imxtm)
+{
+ writel_relaxed(0, imxtm->base + MX1_2_TSTAT);
+}
+
+static void imx21_gpt_irq_acknowledge(struct imx_timer *imxtm)
+{
+ writel_relaxed(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+ imxtm->base + MX1_2_TSTAT);
+}
+
+static void imx31_gpt_irq_acknowledge(struct imx_timer *imxtm)
+{
+ writel_relaxed(V2_TSTAT_OF1, imxtm->base + V2_TSTAT);
+}
+#define imx6dl_gpt_irq_acknowledge imx31_gpt_irq_acknowledge
+
+static void __iomem *sched_clock_reg;
+
+static u64 notrace mxc_read_sched_clock(void)
+{
+ return sched_clock_reg ? readl_relaxed(sched_clock_reg) : 0;
+}
+
+static struct delay_timer imx_delay_timer;
+
+static unsigned long imx_read_current_timer(void)
+{
+ return readl_relaxed(sched_clock_reg);
+}
+
+static int __init mxc_clocksource_init(struct imx_timer *imxtm)
+{
+ unsigned int c = clk_get_rate(imxtm->clk_per);
+ void __iomem *reg = imxtm->base + imxtm->gpt->reg_tcn;
+
+ imx_delay_timer.read_current_timer = &imx_read_current_timer;
+ imx_delay_timer.freq = c;
+ register_current_timer_delay(&imx_delay_timer);
+
+ sched_clock_reg = reg;
+
+ sched_clock_register(mxc_read_sched_clock, 32, c);
+ return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
+ clocksource_mmio_readl_up);
+}
+
+/* clock event */
+
+static int mx1_2_set_next_event(unsigned long evt,
+ struct clock_event_device *ced)
+{
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ unsigned long tcmp;
+
+ tcmp = readl_relaxed(imxtm->base + MX1_2_TCN) + evt;
+
+ writel_relaxed(tcmp, imxtm->base + MX1_2_TCMP);
+
+ return (int)(tcmp - readl_relaxed(imxtm->base + MX1_2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int v2_set_next_event(unsigned long evt,
+ struct clock_event_device *ced)
+{
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ unsigned long tcmp;
+
+ tcmp = readl_relaxed(imxtm->base + V2_TCN) + evt;
+
+ writel_relaxed(tcmp, imxtm->base + V2_TCMP);
+
+ return evt < 0x7fffffff &&
+ (int)(tcmp - readl_relaxed(imxtm->base + V2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] = {
+ [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+ [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
+ [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+ [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED",
+ [CLOCK_EVT_MODE_RESUME] = "CLOCK_EVT_MODE_RESUME",
+};
+#endif /* DEBUG */
+
+static void mxc_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *ced)
+{
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ unsigned long flags;
+
+ /*
+ * The timer interrupt generation is disabled at least
+ * for enough time to call mxc_set_next_event()
+ */
+ local_irq_save(flags);
+
+ /* Disable interrupt in GPT module */
+ imxtm->gpt->gpt_irq_disable(imxtm);
+
+ if (mode != imxtm->cem) {
+ u32 tcn = readl_relaxed(imxtm->base + imxtm->gpt->reg_tcn);
+ /* Set event time into far-far future */
+ writel_relaxed(tcn - 3, imxtm->base + imxtm->gpt->reg_tcmp);
+
+ /* Clear pending interrupt */
+ imxtm->gpt->gpt_irq_acknowledge(imxtm);
+ }
+
+#ifdef DEBUG
+ printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
+ clock_event_mode_label[imxtm->cem],
+ clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+ /* Remember timer mode */
+ imxtm->cem = mode;
+ local_irq_restore(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
+ "supported for i.MX\n");
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Do not put overhead of interrupt enable/disable into
+ * mxc_set_next_event(), the core has about 4 minutes
+ * to call mxc_set_next_event() or shutdown clock after
+ * mode switching
+ */
+ local_irq_save(flags);
+ imxtm->gpt->gpt_irq_enable(imxtm);
+ local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ /* Left event sources disabled, no more interrupts appear */
+ break;
+ }
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ced = dev_id;
+ struct imx_timer *imxtm = to_imx_timer(ced);
+ uint32_t tstat;
+
+ tstat = readl_relaxed(imxtm->base + imxtm->gpt->reg_tstat);
+
+ imxtm->gpt->gpt_irq_acknowledge(imxtm);
+
+ ced->event_handler(ced);
+
+ return IRQ_HANDLED;
+}
+
+static int __init mxc_clockevent_init(struct imx_timer *imxtm)
+{
+ struct clock_event_device *ced = &imxtm->ced;
+ struct irqaction *act = &imxtm->act;
+
+ imxtm->cem = CLOCK_EVT_MODE_UNUSED;
+
+ ced->name = "mxc_timer1";
+ ced->features = CLOCK_EVT_FEAT_ONESHOT;
+ ced->set_mode = mxc_set_mode;
+ ced->set_next_event = imxtm->gpt->set_next_event;
+ ced->rating = 200;
+ ced->cpumask = cpumask_of(0);
+ clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
+ 0xff, 0xfffffffe);
+
+ act->name = "i.MX Timer Tick";
+ act->flags = IRQF_TIMER | IRQF_IRQPOLL;
+ act->handler = mxc_timer_interrupt;
+ act->dev_id = ced;
+
+ return setup_irq(imxtm->irq, act);
+}
+
+static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
+{
+ u32 tctl_val;
+
+ tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+ writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
+}
+#define imx21_gpt_setup_tctl imx1_gpt_setup_tctl
+
+static void imx31_gpt_setup_tctl(struct imx_timer *imxtm)
+{
+ u32 tctl_val;
+
+ tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ if (clk_get_rate(imxtm->clk_per) == V2_TIMER_RATE_OSC_DIV8)
+ tctl_val |= V2_TCTL_CLK_OSC_DIV8;
+ else
+ tctl_val |= V2_TCTL_CLK_PER;
+
+ writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
+}
+
+static void imx6dl_gpt_setup_tctl(struct imx_timer *imxtm)
+{
+ u32 tctl_val;
+
+ tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ if (clk_get_rate(imxtm->clk_per) == V2_TIMER_RATE_OSC_DIV8) {
+ tctl_val |= V2_TCTL_CLK_OSC_DIV8;
+ /* 24 / 8 = 3 MHz */
+ writel_relaxed(7 << V2_TPRER_PRE24M, imxtm->base + MXC_TPRER);
+ tctl_val |= V2_TCTL_24MEN;
+ } else {
+ tctl_val |= V2_TCTL_CLK_PER;
+ }
+
+ writel_relaxed(tctl_val, imxtm->base + MXC_TCTL);
+}
+
+static const struct imx_gpt_data imx1_gpt_data = {
+ .reg_tstat = MX1_2_TSTAT,
+ .reg_tcn = MX1_2_TCN,
+ .reg_tcmp = MX1_2_TCMP,
+ .gpt_irq_enable = imx1_gpt_irq_enable,
+ .gpt_irq_disable = imx1_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx1_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx1_gpt_setup_tctl,
+ .set_next_event = mx1_2_set_next_event,
+};
+
+static const struct imx_gpt_data imx21_gpt_data = {
+ .reg_tstat = MX1_2_TSTAT,
+ .reg_tcn = MX1_2_TCN,
+ .reg_tcmp = MX1_2_TCMP,
+ .gpt_irq_enable = imx21_gpt_irq_enable,
+ .gpt_irq_disable = imx21_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx21_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx21_gpt_setup_tctl,
+ .set_next_event = mx1_2_set_next_event,
+};
+
+static const struct imx_gpt_data imx31_gpt_data = {
+ .reg_tstat = V2_TSTAT,
+ .reg_tcn = V2_TCN,
+ .reg_tcmp = V2_TCMP,
+ .gpt_irq_enable = imx31_gpt_irq_enable,
+ .gpt_irq_disable = imx31_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx31_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx31_gpt_setup_tctl,
+ .set_next_event = v2_set_next_event,
+};
+
+static const struct imx_gpt_data imx6dl_gpt_data = {
+ .reg_tstat = V2_TSTAT,
+ .reg_tcn = V2_TCN,
+ .reg_tcmp = V2_TCMP,
+ .gpt_irq_enable = imx6dl_gpt_irq_enable,
+ .gpt_irq_disable = imx6dl_gpt_irq_disable,
+ .gpt_irq_acknowledge = imx6dl_gpt_irq_acknowledge,
+ .gpt_setup_tctl = imx6dl_gpt_setup_tctl,
+ .set_next_event = v2_set_next_event,
+};
+
+static void __init _mxc_timer_init(struct imx_timer *imxtm)
+{
+ switch (imxtm->type) {
+ case GPT_TYPE_IMX1:
+ imxtm->gpt = &imx1_gpt_data;
+ break;
+ case GPT_TYPE_IMX21:
+ imxtm->gpt = &imx21_gpt_data;
+ break;
+ case GPT_TYPE_IMX31:
+ imxtm->gpt = &imx31_gpt_data;
+ break;
+ case GPT_TYPE_IMX6DL:
+ imxtm->gpt = &imx6dl_gpt_data;
+ break;
+ default:
+ BUG();
+ }
+
+ if (IS_ERR(imxtm->clk_per)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
+ }
+
+ if (!IS_ERR(imxtm->clk_ipg))
+ clk_prepare_enable(imxtm->clk_ipg);
+
+ clk_prepare_enable(imxtm->clk_per);
+
+ /*
+ * Initialise to a known state (all timers off, and timing reset)
+ */
+
+ writel_relaxed(0, imxtm->base + MXC_TCTL);
+ writel_relaxed(0, imxtm->base + MXC_TPRER); /* see datasheet note */
+
+ imxtm->gpt->gpt_setup_tctl(imxtm);
+
+ /* init and register the timer to the framework */
+ mxc_clocksource_init(imxtm);
+ mxc_clockevent_init(imxtm);
+}
+
+void __init mxc_timer_init(unsigned long pbase, int irq, enum imx_gpt_type type)
+{
+ struct imx_timer *imxtm;
+
+ imxtm = kzalloc(sizeof(*imxtm), GFP_KERNEL);
+ BUG_ON(!imxtm);
+
+ imxtm->clk_per = clk_get_sys("imx-gpt.0", "per");
+ imxtm->clk_ipg = clk_get_sys("imx-gpt.0", "ipg");
+
+ imxtm->base = ioremap(pbase, SZ_4K);
+ BUG_ON(!imxtm->base);
+
+ imxtm->type = type;
+
+ _mxc_timer_init(imxtm);
+}
+
+static void __init mxc_timer_init_dt(struct device_node *np, enum imx_gpt_type type)
+{
+ struct imx_timer *imxtm;
+ static int initialized;
+
+ /* Support one instance only */
+ if (initialized)
+ return;
+
+ imxtm = kzalloc(sizeof(*imxtm), GFP_KERNEL);
+ BUG_ON(!imxtm);
+
+ imxtm->base = of_iomap(np, 0);
+ WARN_ON(!imxtm->base);
+ imxtm->irq = irq_of_parse_and_map(np, 0);
+
+ imxtm->clk_ipg = of_clk_get_by_name(np, "ipg");
+
+ /* Try osc_per first, and fall back to per otherwise */
+ imxtm->clk_per = of_clk_get_by_name(np, "osc_per");
+ if (IS_ERR(imxtm->clk_per))
+ imxtm->clk_per = of_clk_get_by_name(np, "per");
+
+ imxtm->type = type;
+
+ _mxc_timer_init(imxtm);
+
+ initialized = 1;
+}
+
+static void __init imx1_timer_init_dt(struct device_node *np)
+{
+ mxc_timer_init_dt(np, GPT_TYPE_IMX1);
+}
+
+static void __init imx21_timer_init_dt(struct device_node *np)
+{
+ mxc_timer_init_dt(np, GPT_TYPE_IMX21);
+}
+
+static void __init imx31_timer_init_dt(struct device_node *np)
+{
+ enum imx_gpt_type type = GPT_TYPE_IMX31;
+
+ /*
+ * We were using the same compatible string for i.MX6Q/D and i.MX6DL/S
+ * GPT device, while they actually have different programming model.
+ * This is a workaround to keep the existing i.MX6DL/S DTBs continue
+ * working with the new kernel.
+ */
+ if (of_machine_is_compatible("fsl,imx6dl"))
+ type = GPT_TYPE_IMX6DL;
+
+ mxc_timer_init_dt(np, type);
+}
+
+static void __init imx6dl_timer_init_dt(struct device_node *np)
+{
+ mxc_timer_init_dt(np, GPT_TYPE_IMX6DL);
+}
+
+CLOCKSOURCE_OF_DECLARE(imx1_timer, "fsl,imx1-gpt", imx1_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx21_timer, "fsl,imx21-gpt", imx21_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx31_timer, "fsl,imx31-gpt", imx31_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx25_timer, "fsl,imx25-gpt", imx31_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx50_timer, "fsl,imx50-gpt", imx31_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx51_timer, "fsl,imx51-gpt", imx31_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx53_timer, "fsl,imx53-gpt", imx31_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx6q_timer, "fsl,imx6q-gpt", imx31_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx6dl_timer, "fsl,imx6dl-gpt", imx6dl_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx6sl_timer, "fsl,imx6sl-gpt", imx6dl_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt);
state->current_buf = 0;
state->buf_dma = 0;
+ state->buflen_0 = 0;
+ state->buflen_1 = 0;
return 0;
}
/* Buffer, its dma address and lock */
struct buf_data {
- u8 buf[RN_BUF_SIZE];
+ u8 buf[RN_BUF_SIZE] ____cacheline_aligned;
dma_addr_t addr;
struct completion filled;
u32 hw_desc[DESC_JOB_O_LEN];
#define AT_XDMAC_MBR_UBC_NDV3 (0x3 << 27) /* Next Descriptor View 3 */
#define AT_XDMAC_MAX_CHAN 0x20
+#define AT_XDMAC_MAX_CSIZE 16 /* 16 data */
+#define AT_XDMAC_MAX_DWIDTH 8 /* 64 bits */
#define AT_XDMAC_DMA_BUSWIDTHS\
(BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) |\
struct dma_chan chan;
void __iomem *ch_regs;
u32 mask; /* Channel Mask */
- u32 cfg[2]; /* Channel Configuration Register */
- #define AT_XDMAC_DEV_TO_MEM_CFG 0 /* Predifined dev to mem channel conf */
- #define AT_XDMAC_MEM_TO_DEV_CFG 1 /* Predifined mem to dev channel conf */
+ u32 cfg; /* Channel Configuration Register */
u8 perid; /* Peripheral ID */
u8 perif; /* Peripheral Interface */
u8 memif; /* Memory Interface */
- u32 per_src_addr;
- u32 per_dst_addr;
u32 save_cc;
u32 save_cim;
u32 save_cnda;
u32 save_cndc;
unsigned long status;
struct tasklet_struct tasklet;
+ struct dma_slave_config sconfig;
spinlock_t lock;
struct at_xdmac_desc *desc = txd_to_at_desc(tx);
struct at_xdmac_chan *atchan = to_at_xdmac_chan(tx->chan);
dma_cookie_t cookie;
+ unsigned long irqflags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
cookie = dma_cookie_assign(tx);
dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
if (list_is_singular(&atchan->xfers_list))
at_xdmac_start_xfer(atchan, desc);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
return cookie;
}
return chan;
}
+static int at_xdmac_compute_chan_conf(struct dma_chan *chan,
+ enum dma_transfer_direction direction)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ int csize, dwidth;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ atchan->cfg =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_FIXED_AM
+ | AT_XDMAC_CC_DIF(atchan->memif)
+ | AT_XDMAC_CC_SIF(atchan->perif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_PER2MEM
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = ffs(atchan->sconfig.src_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(atchan->sconfig.src_addr_width) - 1;
+ if (dwidth < 0) {
+ dev_err(chan2dev(chan), "invalid src addr width value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth);
+ } else if (direction == DMA_MEM_TO_DEV) {
+ atchan->cfg =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_FIXED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+ | AT_XDMAC_CC_DIF(atchan->perif)
+ | AT_XDMAC_CC_SIF(atchan->memif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_MEM2PER
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = ffs(atchan->sconfig.dst_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(atchan->sconfig.dst_addr_width) - 1;
+ if (dwidth < 0) {
+ dev_err(chan2dev(chan), "invalid dst addr width value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth);
+ }
+
+ dev_dbg(chan2dev(chan), "%s: cfg=0x%08x\n", __func__, atchan->cfg);
+
+ return 0;
+}
+
+/*
+ * Only check that maxburst and addr width values are supported by the
+ * the controller but not that the configuration is good to perform the
+ * transfer since we don't know the direction at this stage.
+ */
+static int at_xdmac_check_slave_config(struct dma_slave_config *sconfig)
+{
+ if ((sconfig->src_maxburst > AT_XDMAC_MAX_CSIZE)
+ || (sconfig->dst_maxburst > AT_XDMAC_MAX_CSIZE))
+ return -EINVAL;
+
+ if ((sconfig->src_addr_width > AT_XDMAC_MAX_DWIDTH)
+ || (sconfig->dst_addr_width > AT_XDMAC_MAX_DWIDTH))
+ return -EINVAL;
+
+ return 0;
+}
+
static int at_xdmac_set_slave_config(struct dma_chan *chan,
struct dma_slave_config *sconfig)
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
- u8 dwidth;
- int csize;
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] =
- AT91_XDMAC_DT_PERID(atchan->perid)
- | AT_XDMAC_CC_DAM_INCREMENTED_AM
- | AT_XDMAC_CC_SAM_FIXED_AM
- | AT_XDMAC_CC_DIF(atchan->memif)
- | AT_XDMAC_CC_SIF(atchan->perif)
- | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- | AT_XDMAC_CC_DSYNC_PER2MEM
- | AT_XDMAC_CC_MBSIZE_SIXTEEN
- | AT_XDMAC_CC_TYPE_PER_TRAN;
- csize = at_xdmac_csize(sconfig->src_maxburst);
- if (csize < 0) {
- dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ if (at_xdmac_check_slave_config(sconfig)) {
+ dev_err(chan2dev(chan), "invalid slave configuration\n");
return -EINVAL;
}
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_CSIZE(csize);
- dwidth = ffs(sconfig->src_addr_width) - 1;
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
-
-
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] =
- AT91_XDMAC_DT_PERID(atchan->perid)
- | AT_XDMAC_CC_DAM_FIXED_AM
- | AT_XDMAC_CC_SAM_INCREMENTED_AM
- | AT_XDMAC_CC_DIF(atchan->perif)
- | AT_XDMAC_CC_SIF(atchan->memif)
- | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- | AT_XDMAC_CC_DSYNC_MEM2PER
- | AT_XDMAC_CC_MBSIZE_SIXTEEN
- | AT_XDMAC_CC_TYPE_PER_TRAN;
- csize = at_xdmac_csize(sconfig->dst_maxburst);
- if (csize < 0) {
- dev_err(chan2dev(chan), "invalid src maxburst value\n");
- return -EINVAL;
- }
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_CSIZE(csize);
- dwidth = ffs(sconfig->dst_addr_width) - 1;
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
-
- /* Src and dst addr are needed to configure the link list descriptor. */
- atchan->per_src_addr = sconfig->src_addr;
- atchan->per_dst_addr = sconfig->dst_addr;
- dev_dbg(chan2dev(chan),
- "%s: cfg[dev2mem]=0x%08x, cfg[mem2dev]=0x%08x, per_src_addr=0x%08x, per_dst_addr=0x%08x\n",
- __func__, atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG],
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG],
- atchan->per_src_addr, atchan->per_dst_addr);
+ memcpy(&atchan->sconfig, sconfig, sizeof(atchan->sconfig));
return 0;
}
struct scatterlist *sg;
int i;
unsigned int xfer_size = 0;
+ unsigned long irqflags;
+ struct dma_async_tx_descriptor *ret = NULL;
if (!sgl)
return NULL;
flags);
/* Protect dma_sconfig field that can be modified by set_slave_conf. */
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
+
+ if (at_xdmac_compute_chan_conf(chan, direction))
+ goto spin_unlock;
/* Prepare descriptors. */
for_each_sg(sgl, sg, sg_len, i) {
mem = sg_dma_address(sg);
if (unlikely(!len)) {
dev_err(chan2dev(chan), "sg data length is zero\n");
- spin_unlock_bh(&atchan->lock);
- return NULL;
+ goto spin_unlock;
}
dev_dbg(chan2dev(chan), "%s: * sg%d len=%u, mem=0x%08x\n",
__func__, i, len, mem);
dev_err(chan2dev(chan), "can't get descriptor\n");
if (first)
list_splice_init(&first->descs_list, &atchan->free_descs_list);
- spin_unlock_bh(&atchan->lock);
- return NULL;
+ goto spin_unlock;
}
/* Linked list descriptor setup. */
if (direction == DMA_DEV_TO_MEM) {
- desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_sa = atchan->sconfig.src_addr;
desc->lld.mbr_da = mem;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
} else {
desc->lld.mbr_sa = mem;
- desc->lld.mbr_da = atchan->per_dst_addr;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ desc->lld.mbr_da = atchan->sconfig.dst_addr;
}
+ desc->lld.mbr_cfg = atchan->cfg;
dwidth = at_xdmac_get_dwidth(desc->lld.mbr_cfg);
fixed_dwidth = IS_ALIGNED(len, 1 << dwidth)
? at_xdmac_get_dwidth(desc->lld.mbr_cfg)
xfer_size += len;
}
- spin_unlock_bh(&atchan->lock);
first->tx_dma_desc.flags = flags;
first->xfer_size = xfer_size;
first->direction = direction;
+ ret = &first->tx_dma_desc;
- return &first->tx_dma_desc;
+spin_unlock:
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
+ return ret;
}
static struct dma_async_tx_descriptor *
struct at_xdmac_desc *first = NULL, *prev = NULL;
unsigned int periods = buf_len / period_len;
int i;
+ unsigned long irqflags;
dev_dbg(chan2dev(chan), "%s: buf_addr=%pad, buf_len=%zd, period_len=%zd, dir=%s, flags=0x%lx\n",
__func__, &buf_addr, buf_len, period_len,
return NULL;
}
+ if (at_xdmac_compute_chan_conf(chan, direction))
+ return NULL;
+
for (i = 0; i < periods; i++) {
struct at_xdmac_desc *desc = NULL;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
desc = at_xdmac_get_desc(atchan);
if (!desc) {
dev_err(chan2dev(chan), "can't get descriptor\n");
if (first)
list_splice_init(&first->descs_list, &atchan->free_descs_list);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
return NULL;
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
dev_dbg(chan2dev(chan),
"%s: desc=0x%p, tx_dma_desc.phys=%pad\n",
__func__, desc, &desc->tx_dma_desc.phys);
if (direction == DMA_DEV_TO_MEM) {
- desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_sa = atchan->sconfig.src_addr;
desc->lld.mbr_da = buf_addr + i * period_len;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
} else {
desc->lld.mbr_sa = buf_addr + i * period_len;
- desc->lld.mbr_da = atchan->per_dst_addr;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ desc->lld.mbr_da = atchan->sconfig.dst_addr;
}
+ desc->lld.mbr_cfg = atchan->cfg;
desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1
| AT_XDMAC_MBR_UBC_NDEN
| AT_XDMAC_MBR_UBC_NSEN
| AT_XDMAC_CC_SIF(0)
| AT_XDMAC_CC_MBSIZE_SIXTEEN
| AT_XDMAC_CC_TYPE_MEM_TRAN;
+ unsigned long irqflags;
dev_dbg(chan2dev(chan), "%s: src=%pad, dest=%pad, len=%zd, flags=0x%lx\n",
__func__, &src, &dest, len, flags);
dev_dbg(chan2dev(chan), "%s: remaining_size=%zu\n", __func__, remaining_size);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
desc = at_xdmac_get_desc(atchan);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
if (!desc) {
dev_err(chan2dev(chan), "can't get descriptor\n");
if (first)
int residue;
u32 cur_nda, mask, value;
u8 dwidth = 0;
+ unsigned long flags;
ret = dma_cookie_status(chan, cookie, txstate);
if (ret == DMA_COMPLETE)
if (!txstate)
return ret;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, xfer_node);
*/
if (!desc->active_xfer) {
dma_set_residue(txstate, desc->xfer_size);
- spin_unlock_bh(&atchan->lock);
- return ret;
+ goto spin_unlock;
}
residue = desc->xfer_size;
}
residue += at_xdmac_chan_read(atchan, AT_XDMAC_CUBC) << dwidth;
- spin_unlock_bh(&atchan->lock);
-
dma_set_residue(txstate, residue);
dev_dbg(chan2dev(chan),
"%s: desc=0x%p, tx_dma_desc.phys=%pad, tx_status=%d, cookie=%d, residue=%d\n",
__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);
+spin_unlock:
+ spin_unlock_irqrestore(&atchan->lock, flags);
return ret;
}
static void at_xdmac_advance_work(struct at_xdmac_chan *atchan)
{
struct at_xdmac_desc *desc;
+ unsigned long flags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
/*
* If channel is enabled, do nothing, advance_work will be triggered
at_xdmac_start_xfer(atchan, desc);
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
}
static void at_xdmac_handle_cyclic(struct at_xdmac_chan *atchan)
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
int ret;
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
ret = at_xdmac_set_slave_config(chan, config);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return ret;
}
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
if (test_and_set_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status))
return 0;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
at_xdmac_write(atxdmac, AT_XDMAC_GRWS, atchan->mask);
while (at_xdmac_chan_read(atchan, AT_XDMAC_CC)
& (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP))
cpu_relax();
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
}
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
if (!at_xdmac_chan_is_paused(atchan)) {
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
}
at_xdmac_write(atxdmac, AT_XDMAC_GRWR, atchan->mask);
clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
}
struct at_xdmac_desc *desc, *_desc;
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
while (at_xdmac_read(atxdmac, AT_XDMAC_GS) & atchan->mask)
cpu_relax();
at_xdmac_remove_xfer(atchan, desc);
clear_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
}
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac_desc *desc;
int i;
+ unsigned long flags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
if (at_xdmac_chan_is_enabled(atchan)) {
dev_err(chan2dev(chan),
dev_dbg(chan2dev(chan), "%s: allocated %d descriptors\n", __func__, i);
spin_unlock:
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return i;
}
caps->directions = device->directions;
caps->residue_granularity = device->residue_granularity;
- caps->cmd_pause = !!device->device_pause;
+ /*
+ * Some devices implement only pause (e.g. to get residuum) but no
+ * resume. However cmd_pause is advertised as pause AND resume.
+ */
+ caps->cmd_pause = !!(device->device_pause && device->device_resume);
caps->cmd_terminate = !!device->device_terminate_all;
return 0;
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
-CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o
+CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/
--- /dev/null
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/outercache.h>
+#include <asm/cacheflush.h>
+
+#include "qcom_scm.h"
+
+#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
+
+struct qcom_scm_entry {
+ int flag;
+ void *entry;
+};
+
+static struct qcom_scm_entry qcom_scm_wb[] = {
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
+static DEFINE_MUTEX(qcom_scm_lock);
+
+/**
+ * struct qcom_scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from qcom_scm_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ * ------------------- <--- struct qcom_scm_command
+ * | command header |
+ * ------------------- <--- qcom_scm_get_command_buffer()
+ * | command buffer |
+ * ------------------- <--- struct qcom_scm_response and
+ * | response header | qcom_scm_command_to_response()
+ * ------------------- <--- qcom_scm_get_response_buffer()
+ * | response buffer |
+ * -------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate qcom_scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct qcom_scm_command {
+ __le32 len;
+ __le32 buf_offset;
+ __le32 resp_hdr_offset;
+ __le32 id;
+ __le32 buf[0];
+};
+
+/**
+ * struct qcom_scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of qcom_scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct qcom_scm_response {
+ __le32 len;
+ __le32 buf_offset;
+ __le32 is_complete;
+};
+
+/**
+ * alloc_qcom_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
+ */
+static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
+{
+ struct qcom_scm_command *cmd;
+ size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
+ resp_size;
+ u32 offset;
+
+ cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+ if (cmd) {
+ cmd->len = cpu_to_le32(len);
+ offset = offsetof(struct qcom_scm_command, buf);
+ cmd->buf_offset = cpu_to_le32(offset);
+ cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
+ }
+ return cmd;
+}
+
+/**
+ * free_qcom_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
+{
+ kfree(cmd);
+}
+
+/**
+ * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct qcom_scm_response *qcom_scm_command_to_response(
+ const struct qcom_scm_command *cmd)
+{
+ return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
+}
+
+/**
+ * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
+{
+ return (void *)cmd->buf;
+}
+
+/**
+ * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
+{
+ return (void *)rsp + le32_to_cpu(rsp->buf_offset);
+}
+
+static int qcom_scm_remap_error(int err)
+{
+ pr_err("qcom_scm_call failed with error code %d\n", err);
+ switch (err) {
+ case QCOM_SCM_ERROR:
+ return -EIO;
+ case QCOM_SCM_EINVAL_ADDR:
+ case QCOM_SCM_EINVAL_ARG:
+ return -EINVAL;
+ case QCOM_SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case QCOM_SCM_ENOMEM:
+ return -ENOMEM;
+ }
+ return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+ int context_id;
+ register u32 r0 asm("r0") = 1;
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = cmd_addr;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ } while (r0 == QCOM_SCM_INTERRUPTED);
+
+ return r0;
+}
+
+static int __qcom_scm_call(const struct qcom_scm_command *cmd)
+{
+ int ret;
+ u32 cmd_addr = virt_to_phys(cmd);
+
+ /*
+ * Flush the command buffer so that the secure world sees
+ * the correct data.
+ */
+ __cpuc_flush_dcache_area((void *)cmd, cmd->len);
+ outer_flush_range(cmd_addr, cmd_addr + cmd->len);
+
+ ret = smc(cmd_addr);
+ if (ret < 0)
+ ret = qcom_scm_remap_error(ret);
+
+ return ret;
+}
+
+static void qcom_scm_inv_range(unsigned long start, unsigned long end)
+{
+ u32 cacheline_size, ctr;
+
+ asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
+ cacheline_size = 4 << ((ctr >> 16) & 0xf);
+
+ start = round_down(start, cacheline_size);
+ end = round_up(end, cacheline_size);
+ outer_inv_range(start, end);
+ while (start < end) {
+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+ : "memory");
+ start += cacheline_size;
+ }
+ dsb();
+ isb();
+}
+
+/**
+ * qcom_scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ *
+ * A note on cache maintenance:
+ * Note that any buffers that are expected to be accessed by the secure world
+ * must be flushed before invoking qcom_scm_call and invalidated in the cache
+ * immediately after qcom_scm_call returns. Cache maintenance on the command
+ * and response buffers is taken care of by qcom_scm_call; however, callers are
+ * responsible for any other cached buffers passed over to the secure world.
+ */
+static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
+ size_t cmd_len, void *resp_buf, size_t resp_len)
+{
+ int ret;
+ struct qcom_scm_command *cmd;
+ struct qcom_scm_response *rsp;
+ unsigned long start, end;
+
+ cmd = alloc_qcom_scm_command(cmd_len, resp_len);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
+ if (cmd_buf)
+ memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+ mutex_lock(&qcom_scm_lock);
+ ret = __qcom_scm_call(cmd);
+ mutex_unlock(&qcom_scm_lock);
+ if (ret)
+ goto out;
+
+ rsp = qcom_scm_command_to_response(cmd);
+ start = (unsigned long)rsp;
+
+ do {
+ qcom_scm_inv_range(start, start + sizeof(*rsp));
+ } while (!rsp->is_complete);
+
+ end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
+ qcom_scm_inv_range(start, end);
+
+ if (resp_buf)
+ memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
+out:
+ free_qcom_scm_command(cmd);
+ return ret;
+}
+
+#define SCM_CLASS_REGISTER (0x2 << 8)
+#define SCM_MASK_IRQS BIT(5)
+#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
+ SCM_CLASS_REGISTER | \
+ SCM_MASK_IRQS | \
+ (n & 0xf))
+
+/**
+ * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @arg1: first argument
+ *
+ * This shall only be used with commands that are guaranteed to be
+ * uninterruptable, atomic and SMP safe.
+ */
+static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
+{
+ int context_id;
+
+ register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = arg1;
+
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ return r0;
+}
+
+u32 qcom_scm_get_version(void)
+{
+ int context_id;
+ static u32 version = -1;
+ register u32 r0 asm("r0");
+ register u32 r1 asm("r1");
+
+ if (version != -1)
+ return version;
+
+ mutex_lock(&qcom_scm_lock);
+
+ r0 = 0x1 << 8;
+ r1 = (u32)&context_id;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r1")
+ __asmeq("%2", "r0")
+ __asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0), "=r" (r1)
+ : "r" (r0), "r" (r1)
+ : "r2", "r3");
+ } while (r0 == QCOM_SCM_INTERRUPTED);
+
+ version = r1;
+ mutex_unlock(&qcom_scm_lock);
+
+ return version;
+}
+EXPORT_SYMBOL(qcom_scm_get_version);
+
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+static int qcom_scm_set_boot_addr(u32 addr, int flags)
+{
+ struct {
+ __le32 flags;
+ __le32 addr;
+ } cmd;
+
+ cmd.addr = cpu_to_le32(addr);
+ cmd.flags = cpu_to_le32(flags);
+ return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
+}
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ int flags = 0;
+ int cpu;
+ int scm_cb_flags[] = {
+ QCOM_SCM_FLAG_COLDBOOT_CPU0,
+ QCOM_SCM_FLAG_COLDBOOT_CPU1,
+ QCOM_SCM_FLAG_COLDBOOT_CPU2,
+ QCOM_SCM_FLAG_COLDBOOT_CPU3,
+ };
+
+ if (!cpus || (cpus && cpumask_empty(cpus)))
+ return -EINVAL;
+
+ for_each_cpu(cpu, cpus) {
+ if (cpu < ARRAY_SIZE(scm_cb_flags))
+ flags |= scm_cb_flags[cpu];
+ else
+ set_cpu_present(cpu, false);
+ }
+
+ return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+}
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ int ret;
+ int flags = 0;
+ int cpu;
+
+ /*
+ * Reassign only if we are switching from hotplug entry point
+ * to cpuidle entry point or vice versa.
+ */
+ for_each_cpu(cpu, cpus) {
+ if (entry == qcom_scm_wb[cpu].entry)
+ continue;
+ flags |= qcom_scm_wb[cpu].flag;
+ }
+
+ /* No change in entry function */
+ if (!flags)
+ return 0;
+
+ ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ if (!ret) {
+ for_each_cpu(cpu, cpus)
+ qcom_scm_wb[cpu].entry = entry;
+ }
+
+ return ret;
+}
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void __qcom_scm_cpu_power_down(u32 flags)
+{
+ qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
+ flags & QCOM_SCM_FLUSH_FLAG_MASK);
+}
+
+int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+{
+ int ret;
+ u32 svc_cmd = (svc_id << 10) | cmd_id;
+ u32 ret_val = 0;
+
+ ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
+ sizeof(svc_cmd), &ret_val, sizeof(ret_val));
+ if (ret)
+ return ret;
+
+ return ret_val;
+}
+
+int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ req, req_cnt * sizeof(*req), resp, sizeof(*resp));
+}
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
* 02110-1301, USA.
*/
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/types.h>
#include <linux/qcom_scm.h>
-#include <asm/outercache.h>
-#include <asm/cacheflush.h>
-
-
-#define QCOM_SCM_ENOMEM -5
-#define QCOM_SCM_EOPNOTSUPP -4
-#define QCOM_SCM_EINVAL_ADDR -3
-#define QCOM_SCM_EINVAL_ARG -2
-#define QCOM_SCM_ERROR -1
-#define QCOM_SCM_INTERRUPTED 1
-
-#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
-#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
-#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
-
-#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
-#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
-#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
-
-struct qcom_scm_entry {
- int flag;
- void *entry;
-};
-
-static struct qcom_scm_entry qcom_scm_wb[] = {
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
-};
-
-static DEFINE_MUTEX(qcom_scm_lock);
-
-/**
- * struct qcom_scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from qcom_scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- * ------------------- <--- struct qcom_scm_command
- * | command header |
- * ------------------- <--- qcom_scm_get_command_buffer()
- * | command buffer |
- * ------------------- <--- struct qcom_scm_response and
- * | response header | qcom_scm_command_to_response()
- * ------------------- <--- qcom_scm_get_response_buffer()
- * | response buffer |
- * -------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate qcom_scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct qcom_scm_command {
- __le32 len;
- __le32 buf_offset;
- __le32 resp_hdr_offset;
- __le32 id;
- __le32 buf[0];
-};
-
-/**
- * struct qcom_scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of qcom_scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct qcom_scm_response {
- __le32 len;
- __le32 buf_offset;
- __le32 is_complete;
-};
-
-/**
- * alloc_qcom_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
- */
-static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct qcom_scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
- resp_size;
- u32 offset;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = cpu_to_le32(len);
- offset = offsetof(struct qcom_scm_command, buf);
- cmd->buf_offset = cpu_to_le32(offset);
- cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
- }
- return cmd;
-}
-
-/**
- * free_qcom_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
- * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct qcom_scm_response *qcom_scm_command_to_response(
- const struct qcom_scm_command *cmd)
-{
- return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
-}
-
-/**
- * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
-{
- return (void *)cmd->buf;
-}
-
-/**
- * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
-{
- return (void *)rsp + le32_to_cpu(rsp->buf_offset);
-}
-
-static int qcom_scm_remap_error(int err)
-{
- pr_err("qcom_scm_call failed with error code %d\n", err);
- switch (err) {
- case QCOM_SCM_ERROR:
- return -EIO;
- case QCOM_SCM_EINVAL_ADDR:
- case QCOM_SCM_EINVAL_ARG:
- return -EINVAL;
- case QCOM_SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case QCOM_SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
- int context_id;
- register u32 r0 asm("r0") = 1;
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = cmd_addr;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- } while (r0 == QCOM_SCM_INTERRUPTED);
-
- return r0;
-}
-
-static int __qcom_scm_call(const struct qcom_scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the command buffer so that the secure world sees
- * the correct data.
- */
- __cpuc_flush_dcache_area((void *)cmd, cmd->len);
- outer_flush_range(cmd_addr, cmd_addr + cmd->len);
-
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = qcom_scm_remap_error(ret);
-
- return ret;
-}
-
-static void qcom_scm_inv_range(unsigned long start, unsigned long end)
-{
- u32 cacheline_size, ctr;
-
- asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
- cacheline_size = 4 << ((ctr >> 16) & 0xf);
-
- start = round_down(start, cacheline_size);
- end = round_up(end, cacheline_size);
- outer_inv_range(start, end);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += cacheline_size;
- }
- dsb();
- isb();
-}
-
-/**
- * qcom_scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- *
- * A note on cache maintenance:
- * Note that any buffers that are expected to be accessed by the secure world
- * must be flushed before invoking qcom_scm_call and invalidated in the cache
- * immediately after qcom_scm_call returns. Cache maintenance on the command
- * and response buffers is taken care of by qcom_scm_call; however, callers are
- * responsible for any other cached buffers passed over to the secure world.
- */
-static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
- size_t cmd_len, void *resp_buf, size_t resp_len)
-{
- int ret;
- struct qcom_scm_command *cmd;
- struct qcom_scm_response *rsp;
- unsigned long start, end;
-
- cmd = alloc_qcom_scm_command(cmd_len, resp_len);
- if (!cmd)
- return -ENOMEM;
-
- cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
- if (cmd_buf)
- memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
- mutex_lock(&qcom_scm_lock);
- ret = __qcom_scm_call(cmd);
- mutex_unlock(&qcom_scm_lock);
- if (ret)
- goto out;
-
- rsp = qcom_scm_command_to_response(cmd);
- start = (unsigned long)rsp;
-
- do {
- qcom_scm_inv_range(start, start + sizeof(*rsp));
- } while (!rsp->is_complete);
-
- end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
- qcom_scm_inv_range(start, end);
-
- if (resp_buf)
- memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
-out:
- free_qcom_scm_command(cmd);
- return ret;
-}
-
-#define SCM_CLASS_REGISTER (0x2 << 8)
-#define SCM_MASK_IRQS BIT(5)
-#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
- SCM_CLASS_REGISTER | \
- SCM_MASK_IRQS | \
- (n & 0xf))
-
-/**
- * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @arg1: first argument
- *
- * This shall only be used with commands that are guaranteed to be
- * uninterruptable, atomic and SMP safe.
- */
-static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
-{
- int context_id;
-
- register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = arg1;
-
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- return r0;
-}
-
-u32 qcom_scm_get_version(void)
-{
- int context_id;
- static u32 version = -1;
- register u32 r0 asm("r0");
- register u32 r1 asm("r1");
-
- if (version != -1)
- return version;
-
- mutex_lock(&qcom_scm_lock);
-
- r0 = 0x1 << 8;
- r1 = (u32)&context_id;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r1")
- __asmeq("%2", "r0")
- __asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0), "=r" (r1)
- : "r" (r0), "r" (r1)
- : "r2", "r3");
- } while (r0 == QCOM_SCM_INTERRUPTED);
-
- version = r1;
- mutex_unlock(&qcom_scm_lock);
-
- return version;
-}
-EXPORT_SYMBOL(qcom_scm_get_version);
-
-#define QCOM_SCM_SVC_BOOT 0x1
-#define QCOM_SCM_BOOT_ADDR 0x1
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-static int qcom_scm_set_boot_addr(u32 addr, int flags)
-{
- struct {
- __le32 flags;
- __le32 addr;
- } cmd;
-
- cmd.addr = cpu_to_le32(addr);
- cmd.flags = cpu_to_le32(flags);
- return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
+#include "qcom_scm.h"
/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
*/
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
- int flags = 0;
- int cpu;
- int scm_cb_flags[] = {
- QCOM_SCM_FLAG_COLDBOOT_CPU0,
- QCOM_SCM_FLAG_COLDBOOT_CPU1,
- QCOM_SCM_FLAG_COLDBOOT_CPU2,
- QCOM_SCM_FLAG_COLDBOOT_CPU3,
- };
-
- if (!cpus || (cpus && cpumask_empty(cpus)))
- return -EINVAL;
-
- for_each_cpu(cpu, cpus) {
- if (cpu < ARRAY_SIZE(scm_cb_flags))
- flags |= scm_cb_flags[cpu];
- else
- set_cpu_present(cpu, false);
- }
-
- return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
+ return __qcom_scm_set_cold_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- int ret;
- int flags = 0;
- int cpu;
-
- /*
- * Reassign only if we are switching from hotplug entry point
- * to cpuidle entry point or vice versa.
- */
- for_each_cpu(cpu, cpus) {
- if (entry == qcom_scm_wb[cpu].entry)
- continue;
- flags |= qcom_scm_wb[cpu].flag;
- }
-
- /* No change in entry function */
- if (!flags)
- return 0;
-
- ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
- if (!ret) {
- for_each_cpu(cpu, cpus)
- qcom_scm_wb[cpu].entry = entry;
- }
-
- return ret;
+ return __qcom_scm_set_warm_boot_addr(entry, cpus);
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
-#define QCOM_SCM_CMD_TERMINATE_PC 0x2
-#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
-
/**
* qcom_scm_cpu_power_down() - Power down the cpu
* @flags - Flags to flush cache
*/
void qcom_scm_cpu_power_down(u32 flags)
{
- qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
- flags & QCOM_SCM_FLUSH_FLAG_MASK);
+ __qcom_scm_cpu_power_down(flags);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
+
+/**
+ * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
+ *
+ * Return true if HDCP is supported, false if not.
+ */
+bool qcom_scm_hdcp_available(void)
+{
+ int ret;
+
+ ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
+ QCOM_SCM_CMD_HDCP);
+
+ return (ret > 0) ? true : false;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_available);
+
+/**
+ * qcom_scm_hdcp_req() - Send HDCP request.
+ * @req: HDCP request array
+ * @req_cnt: HDCP request array count
+ * @resp: response buffer passed to SCM
+ *
+ * Write HDCP register(s) through SCM.
+ */
+int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ return __qcom_scm_hdcp_req(req, req_cnt, resp);
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_req);
--- /dev/null
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_SCM_INT_H
+#define __QCOM_SCM_INT_H
+
+#define QCOM_SCM_SVC_BOOT 0x1
+#define QCOM_SCM_BOOT_ADDR 0x1
+#define QCOM_SCM_BOOT_ADDR_MC 0x11
+
+#define QCOM_SCM_FLAG_HLOS 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_MC 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_MC 0x04
+extern int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+
+#define QCOM_SCM_CMD_TERMINATE_PC 0x2
+#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
+#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
+extern void __qcom_scm_cpu_power_down(u32 flags);
+
+#define QCOM_SCM_SVC_INFO 0x6
+#define QCOM_IS_CALL_AVAIL_CMD 0x1
+extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
+
+#define QCOM_SCM_SVC_HDCP 0x11
+#define QCOM_SCM_CMD_HDCP 0x01
+extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
+
+/* common error codes */
+#define QCOM_SCM_ENOMEM -5
+#define QCOM_SCM_EOPNOTSUPP -4
+#define QCOM_SCM_EINVAL_ADDR -3
+#define QCOM_SCM_EINVAL_ARG -2
+#define QCOM_SCM_ERROR -1
+#define QCOM_SCM_INTERRUPTED 1
+
+#endif
void
i915_gem_retire_requests_ring(struct intel_engine_cs *ring)
{
+ if (list_empty(&ring->request_list))
+ return;
+
WARN_ON(i915_verify_lists(ring->dev));
/* Retire requests first as we use it above for the early return.
} else if (vma->ggtt_view.pages) {
sg_free_table(vma->ggtt_view.pages);
kfree(vma->ggtt_view.pages);
- vma->ggtt_view.pages = NULL;
}
+ vma->ggtt_view.pages = NULL;
}
drm_mm_remove_node(&vma->node);
struct intel_gmbus,
adapter);
struct drm_i915_private *dev_priv = bus->dev_priv;
- int i, reg_offset;
+ int i = 0, inc, try = 0, reg_offset;
int ret = 0;
intel_aux_display_runtime_get(dev_priv);
reg_offset = dev_priv->gpio_mmio_base;
+retry:
I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
- for (i = 0; i < num; i++) {
+ for (; i < num; i += inc) {
+ inc = 1;
if (gmbus_is_index_read(msgs, i, num)) {
ret = gmbus_xfer_index_read(dev_priv, &msgs[i]);
- i += 1; /* set i to the index of the read xfer */
+ inc = 2; /* an index read is two msgs */
} else if (msgs[i].flags & I2C_M_RD) {
ret = gmbus_xfer_read(dev_priv, &msgs[i], 0);
} else {
adapter->name, msgs[i].addr,
(msgs[i].flags & I2C_M_RD) ? 'r' : 'w', msgs[i].len);
+ /*
+ * Passive adapters sometimes NAK the first probe. Retry the first
+ * message once on -ENXIO for GMBUS transfers; the bit banging algorithm
+ * has retries internally. See also the retry loop in
+ * drm_do_probe_ddc_edid, which bails out on the first -ENXIO.
+ */
+ if (ret == -ENXIO && i == 0 && try++ == 0) {
+ DRM_DEBUG_KMS("GMBUS [%s] NAK on first message, retry\n",
+ adapter->name);
+ goto retry;
+ }
+
goto out;
timeout:
DRM_DEBUG_KMS("initialising analog device %d\n", device);
- intel_sdvo_connector = kzalloc(sizeof(*intel_sdvo_connector), GFP_KERNEL);
+ intel_sdvo_connector = intel_sdvo_connector_alloc();
if (!intel_sdvo_connector)
return false;
return MODE_BANDWIDTH;
}
+ if ((mode->hdisplay % 8) != 0 || (mode->hsync_start % 8) != 0 ||
+ (mode->hsync_end % 8) != 0 || (mode->htotal % 8) != 0) {
+ return MODE_H_ILLEGAL;
+ }
+
if (mode->crtc_hdisplay > 2048 || mode->crtc_hsync_start > 4096 ||
mode->crtc_hsync_end > 4096 || mode->crtc_htotal > 4096 ||
mode->crtc_vdisplay > 2048 || mode->crtc_vsync_start > 4096 ||
else
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
- /* if there is no audio, set MINM_OVER_MAXP */
- if (!drm_detect_monitor_audio(radeon_connector_edid(connector)))
- radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
if (rdev->family < CHIP_RV770)
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
/* use frac fb div on APUs */
if ((crtc->mode.clock == test_crtc->mode.clock) &&
(adjusted_clock == test_adjusted_clock) &&
(radeon_crtc->ss_enabled == test_radeon_crtc->ss_enabled) &&
- (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID) &&
- (drm_detect_monitor_audio(radeon_connector_edid(test_radeon_crtc->connector)) ==
- drm_detect_monitor_audio(radeon_connector_edid(radeon_crtc->connector))))
+ (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID))
return test_radeon_crtc->pll_id;
}
}
if (r)
DRM_ERROR("ib ring test failed (%d).\n", r);
+ /*
+ * Turks/Thames GPU will freeze whole laptop if DPM is not restarted
+ * after the CP ring have chew one packet at least. Hence here we stop
+ * and restart DPM after the radeon_ib_ring_tests().
+ */
+ if (rdev->pm.dpm_enabled &&
+ (rdev->pm.pm_method == PM_METHOD_DPM) &&
+ (rdev->family == CHIP_TURKS) &&
+ (rdev->flags & RADEON_IS_MOBILITY)) {
+ mutex_lock(&rdev->pm.mutex);
+ radeon_dpm_disable(rdev);
+ radeon_dpm_enable(rdev);
+ mutex_unlock(&rdev->pm.mutex);
+ }
+
if ((radeon_testing & 1)) {
if (rdev->accel_working)
radeon_test_moves(rdev);
radeon_dp_mst_probe(struct radeon_connector *radeon_connector)
{
struct radeon_connector_atom_dig *dig_connector = radeon_connector->con_priv;
+ struct drm_device *dev = radeon_connector->base.dev;
+ struct radeon_device *rdev = dev->dev_private;
int ret;
u8 msg[1];
if (!radeon_mst)
return 0;
+ if (!ASIC_IS_DCE5(rdev))
+ return 0;
+
if (dig_connector->dpcd[DP_DPCD_REV] < 0x12)
return 0;
if (radeon_get_allowed_info_register(rdev, *value, value))
return -EINVAL;
break;
+ case RADEON_INFO_VA_UNMAP_WORKING:
+ *value = true;
+ break;
default:
DRM_DEBUG_KMS("Invalid request %d\n", info->request);
return -EINVAL;
/* make sure object fit at this offset */
eoffset = soffset + size;
if (soffset >= eoffset) {
- return -EINVAL;
+ r = -EINVAL;
+ goto error_unreserve;
}
last_pfn = eoffset / RADEON_GPU_PAGE_SIZE;
if (last_pfn > rdev->vm_manager.max_pfn) {
dev_err(rdev->dev, "va above limit (0x%08X > 0x%08X)\n",
last_pfn, rdev->vm_manager.max_pfn);
- return -EINVAL;
+ r = -EINVAL;
+ goto error_unreserve;
}
} else {
"(bo %p 0x%010lx 0x%010lx)\n", bo_va->bo,
soffset, tmp->bo, tmp->it.start, tmp->it.last);
mutex_unlock(&vm->mutex);
- return -EINVAL;
+ r = -EINVAL;
+ goto error_unreserve;
}
}
tmp = kzalloc(sizeof(struct radeon_bo_va), GFP_KERNEL);
if (!tmp) {
mutex_unlock(&vm->mutex);
- return -ENOMEM;
+ r = -ENOMEM;
+ goto error_unreserve;
}
tmp->it.start = bo_va->it.start;
tmp->it.last = bo_va->it.last;
r = radeon_vm_clear_bo(rdev, pt);
if (r) {
radeon_bo_unref(&pt);
- radeon_bo_reserve(bo_va->bo, false);
return r;
}
mutex_unlock(&vm->mutex);
return 0;
+
+error_unreserve:
+ radeon_bo_unreserve(bo_va->bo);
+ return r;
}
/**
isert_rdma_accept(struct isert_conn *isert_conn);
struct rdma_cm_id *isert_setup_id(struct isert_np *isert_np);
+static void isert_release_work(struct work_struct *work);
+
static inline bool
isert_prot_cmd(struct isert_conn *conn, struct se_cmd *cmd)
{
mutex_init(&isert_conn->mutex);
spin_lock_init(&isert_conn->pool_lock);
INIT_LIST_HEAD(&isert_conn->fr_pool);
+ INIT_WORK(&isert_conn->release_work, isert_release_work);
}
static void
{
struct isert_np *isert_np = cma_id->context;
struct isert_conn *isert_conn;
+ bool terminating = false;
if (isert_np->np_cm_id == cma_id)
return isert_np_cma_handler(cma_id->context, event);
isert_conn = cma_id->qp->qp_context;
mutex_lock(&isert_conn->mutex);
+ terminating = (isert_conn->state == ISER_CONN_TERMINATING);
isert_conn_terminate(isert_conn);
mutex_unlock(&isert_conn->mutex);
isert_info("conn %p completing wait\n", isert_conn);
complete(&isert_conn->wait);
+ if (terminating)
+ goto out;
+
+ mutex_lock(&isert_np->np_accept_mutex);
+ if (!list_empty(&isert_conn->accept_node)) {
+ list_del_init(&isert_conn->accept_node);
+ isert_put_conn(isert_conn);
+ queue_work(isert_release_wq, &isert_conn->release_work);
+ }
+ mutex_unlock(&isert_np->np_accept_mutex);
+
+out:
return 0;
}
page_off = offset % PAGE_SIZE;
send_wr->sg_list = ib_sge;
- send_wr->num_sge = sg_nents;
send_wr->wr_id = (uintptr_t)&isert_cmd->tx_desc;
/*
* Perform mapping of TCM scatterlist memory ib_sge dma_addr.
ib_sge->addr, ib_sge->length, ib_sge->lkey);
page_off = 0;
data_left -= ib_sge->length;
+ if (!data_left)
+ break;
ib_sge++;
isert_dbg("Incrementing ib_sge pointer to %p\n", ib_sge);
}
+ send_wr->num_sge = ++i;
isert_dbg("Set outgoing sg_list: %p num_sg: %u from TCM SGLs\n",
send_wr->sg_list, send_wr->num_sge);
- return sg_nents;
+ return send_wr->num_sge;
}
static int
isert_wait4flush(isert_conn);
isert_wait4logout(isert_conn);
- INIT_WORK(&isert_conn->release_work, isert_release_work);
queue_work(isert_release_wq, &isert_conn->release_work);
}
{
struct isert_conn *isert_conn = conn->context;
+ isert_wait4flush(isert_conn);
isert_put_conn(isert_conn);
}
{ANY_BOARD_ID, 2961},
1024, 5112, 2024, 4832
},
+ {
+ (const char * const []){"LEN2000", NULL},
+ {ANY_BOARD_ID, ANY_BOARD_ID},
+ 1024, 5113, 2021, 4832
+ },
{
(const char * const []){"LEN2001", NULL},
{ANY_BOARD_ID, ANY_BOARD_ID},
"LEN0045",
"LEN0047",
"LEN0049",
- "LEN2000",
+ "LEN2000", /* S540 */
"LEN2001", /* Edge E431 */
"LEN2002", /* Edge E531 */
"LEN2003",
select IOMMU_API
help
This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra
- SoCs (Tegra30 up to Tegra124).
+ SoCs (Tegra30 up to Tegra132).
config EXYNOS_IOMMU
bool "Exynos IOMMU Support"
static int dmar_forcedac;
static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
+static int intel_iommu_ecs = 1;
+
+/* We only actually use ECS when PASID support (on the new bit 40)
+ * is also advertised. Some early implementations — the ones with
+ * PASID support on bit 28 — have issues even when we *only* use
+ * extended root/context tables. */
+#define ecs_enabled(iommu) (intel_iommu_ecs && ecap_ecs(iommu->ecap) && \
+ ecap_pasid(iommu->ecap))
int intel_iommu_gfx_mapped;
EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped);
printk(KERN_INFO
"Intel-IOMMU: disable supported super page\n");
intel_iommu_superpage = 0;
+ } else if (!strncmp(str, "ecs_off", 7)) {
+ printk(KERN_INFO
+ "Intel-IOMMU: disable extended context table support\n");
+ intel_iommu_ecs = 0;
}
str += strcspn(str, ",");
struct context_entry *context;
u64 *entry;
- if (ecap_ecs(iommu->ecap)) {
+ if (ecs_enabled(iommu)) {
if (devfn >= 0x80) {
devfn -= 0x80;
entry = &root->hi;
return &context[devfn];
}
+static int iommu_dummy(struct device *dev)
+{
+ return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
+}
+
static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devfn)
{
struct dmar_drhd_unit *drhd = NULL;
u16 segment = 0;
int i;
+ if (iommu_dummy(dev))
+ return NULL;
+
if (dev_is_pci(dev)) {
pdev = to_pci_dev(dev);
segment = pci_domain_nr(pdev->bus);
if (context)
free_pgtable_page(context);
- if (!ecap_ecs(iommu->ecap))
+ if (!ecs_enabled(iommu))
continue;
context = iommu_context_addr(iommu, i, 0x80, 0);
unsigned long flag;
addr = virt_to_phys(iommu->root_entry);
- if (ecap_ecs(iommu->ecap))
+ if (ecs_enabled(iommu))
addr |= DMA_RTADDR_RTT;
raw_spin_lock_irqsave(&iommu->register_lock, flag);
return __get_valid_domain_for_dev(dev);
}
-static int iommu_dummy(struct device *dev)
-{
- return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
-}
-
/* Check if the dev needs to go through non-identity map and unmap process.*/
static int iommu_no_mapping(struct device *dev)
{
*/
#include <linux/bitops.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/iommu.h>
#include <linux/kernel.h>
struct mutex lock;
struct list_head list;
+
+ struct dentry *debugfs;
};
struct tegra_smmu_as {
}
}
+static int tegra_smmu_swgroups_show(struct seq_file *s, void *data)
+{
+ struct tegra_smmu *smmu = s->private;
+ unsigned int i;
+ u32 value;
+
+ seq_printf(s, "swgroup enabled ASID\n");
+ seq_printf(s, "------------------------\n");
+
+ for (i = 0; i < smmu->soc->num_swgroups; i++) {
+ const struct tegra_smmu_swgroup *group = &smmu->soc->swgroups[i];
+ const char *status;
+ unsigned int asid;
+
+ value = smmu_readl(smmu, group->reg);
+
+ if (value & SMMU_ASID_ENABLE)
+ status = "yes";
+ else
+ status = "no";
+
+ asid = value & SMMU_ASID_MASK;
+
+ seq_printf(s, "%-9s %-7s %#04x\n", group->name, status,
+ asid);
+ }
+
+ return 0;
+}
+
+static int tegra_smmu_swgroups_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, tegra_smmu_swgroups_show, inode->i_private);
+}
+
+static const struct file_operations tegra_smmu_swgroups_fops = {
+ .open = tegra_smmu_swgroups_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int tegra_smmu_clients_show(struct seq_file *s, void *data)
+{
+ struct tegra_smmu *smmu = s->private;
+ unsigned int i;
+ u32 value;
+
+ seq_printf(s, "client enabled\n");
+ seq_printf(s, "--------------------\n");
+
+ for (i = 0; i < smmu->soc->num_clients; i++) {
+ const struct tegra_mc_client *client = &smmu->soc->clients[i];
+ const char *status;
+
+ value = smmu_readl(smmu, client->smmu.reg);
+
+ if (value & BIT(client->smmu.bit))
+ status = "yes";
+ else
+ status = "no";
+
+ seq_printf(s, "%-12s %s\n", client->name, status);
+ }
+
+ return 0;
+}
+
+static int tegra_smmu_clients_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, tegra_smmu_clients_show, inode->i_private);
+}
+
+static const struct file_operations tegra_smmu_clients_fops = {
+ .open = tegra_smmu_clients_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void tegra_smmu_debugfs_init(struct tegra_smmu *smmu)
+{
+ smmu->debugfs = debugfs_create_dir("smmu", NULL);
+ if (!smmu->debugfs)
+ return;
+
+ debugfs_create_file("swgroups", S_IRUGO, smmu->debugfs, smmu,
+ &tegra_smmu_swgroups_fops);
+ debugfs_create_file("clients", S_IRUGO, smmu->debugfs, smmu,
+ &tegra_smmu_clients_fops);
+}
+
+static void tegra_smmu_debugfs_exit(struct tegra_smmu *smmu)
+{
+ debugfs_remove_recursive(smmu->debugfs);
+}
+
struct tegra_smmu *tegra_smmu_probe(struct device *dev,
const struct tegra_smmu_soc *soc,
struct tegra_mc *mc)
if (err < 0)
return ERR_PTR(err);
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ tegra_smmu_debugfs_init(smmu);
+
return smmu;
}
+
+void tegra_smmu_remove(struct tegra_smmu *smmu)
+{
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ tegra_smmu_debugfs_exit(smmu);
+}
config ARM_NVIC
bool
select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_CHIP
config ARM_VIC
GIC_LOCAL_TO_HWIRQ(GIC_LOCAL_INT_FDC));
}
-static void gic_handle_shared_int(void)
+static void gic_handle_shared_int(bool chained)
{
unsigned int i, intr, virq;
unsigned long *pcpu_mask;
while (intr != gic_shared_intrs) {
virq = irq_linear_revmap(gic_irq_domain,
GIC_SHARED_TO_HWIRQ(intr));
- do_IRQ(virq);
+ if (chained)
+ generic_handle_irq(virq);
+ else
+ do_IRQ(virq);
/* go to next pending bit */
bitmap_clear(pending, intr, 1);
#endif
};
-static void gic_handle_local_int(void)
+static void gic_handle_local_int(bool chained)
{
unsigned long pending, masked;
unsigned int intr, virq;
while (intr != GIC_NUM_LOCAL_INTRS) {
virq = irq_linear_revmap(gic_irq_domain,
GIC_LOCAL_TO_HWIRQ(intr));
- do_IRQ(virq);
+ if (chained)
+ generic_handle_irq(virq);
+ else
+ do_IRQ(virq);
/* go to next pending bit */
bitmap_clear(&pending, intr, 1);
static void __gic_irq_dispatch(void)
{
- gic_handle_local_int();
- gic_handle_shared_int();
+ gic_handle_local_int(false);
+ gic_handle_shared_int(false);
}
static void gic_irq_dispatch(unsigned int irq, struct irq_desc *desc)
{
- __gic_irq_dispatch();
+ gic_handle_local_int(true);
+ gic_handle_shared_int(true);
}
#ifdef CONFIG_MIPS_GIC_IPI
handle_IRQ(irq, regs);
}
+static int nvic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ int i, ret;
+ irq_hw_number_t hwirq;
+ unsigned int type = IRQ_TYPE_NONE;
+ struct of_phandle_args *irq_data = arg;
+
+ ret = irq_domain_xlate_onecell(domain, irq_data->np, irq_data->args,
+ irq_data->args_count, &hwirq, &type);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < nr_irqs; i++)
+ irq_map_generic_chip(domain, virq + i, hwirq + i);
+
+ return 0;
+}
+
+static const struct irq_domain_ops nvic_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .alloc = nvic_irq_domain_alloc,
+ .free = irq_domain_free_irqs_top,
+};
+
static int __init nvic_of_init(struct device_node *node,
struct device_node *parent)
{
irqs = NVIC_MAX_IRQ;
nvic_irq_domain =
- irq_domain_add_linear(node, irqs, &irq_generic_chip_ops, NULL);
+ irq_domain_add_linear(node, irqs, &nvic_irq_domain_ops, NULL);
+
if (!nvic_irq_domain) {
pr_warn("Failed to allocate irq domain\n");
return -ENOMEM;
irqd_set_trigger_type(data, flow_type);
irq_setup_alt_chip(data, flow_type);
- for (i = 0; i <= gc->num_ct; i++, ct++)
+ for (i = 0; i < gc->num_ct; i++, ct++)
if (ct->type & flow_type)
ctrl_off = ct->regs.type;
void __iomem *mscm_ir_base;
u16 cpu_mask;
u16 saved_irsprc[MSCM_IRSPRC_NUM];
+ bool is_nvic;
};
static struct vf610_mscm_ir_chip_data *mscm_ir_data;
writew_relaxed(chip_data->cpu_mask,
chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
- irq_chip_unmask_parent(data);
+ irq_chip_enable_parent(data);
}
static void vf610_mscm_ir_disable(struct irq_data *data)
writew_relaxed(0x0, chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
- irq_chip_mask_parent(data);
+ irq_chip_disable_parent(data);
}
static struct irq_chip vf610_mscm_ir_irq_chip = {
domain->host_data);
gic_data.np = domain->parent->of_node;
- gic_data.args_count = 3;
- gic_data.args[0] = GIC_SPI;
- gic_data.args[1] = irq_data->args[0];
- gic_data.args[2] = irq_data->args[1];
+
+ if (mscm_ir_data->is_nvic) {
+ gic_data.args_count = 1;
+ gic_data.args[0] = irq_data->args[0];
+ } else {
+ gic_data.args_count = 3;
+ gic_data.args[0] = GIC_SPI;
+ gic_data.args[1] = irq_data->args[0];
+ gic_data.args[2] = irq_data->args[1];
+ }
+
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &gic_data);
}
goto out_unmap;
}
+ if (of_device_is_compatible(domain->parent->of_node, "arm,armv7m-nvic"))
+ mscm_ir_data->is_nvic = true;
+
cpu_pm_register_notifier(&mscm_ir_notifier_block);
return 0;
* MA 02111-1307 USA
*/
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
dev_err(sled->cdev.dev, "error updating LED status\n");
}
-static int __init syscon_leds_spawn(struct device_node *np,
- struct device *dev,
- struct regmap *map)
+static int syscon_led_probe(struct platform_device *pdev)
{
- struct device_node *child;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device *parent;
+ struct regmap *map;
+ struct syscon_led *sled;
+ const char *state;
int ret;
- for_each_available_child_of_node(np, child) {
- struct syscon_led *sled;
- const char *state;
-
- /* Only check for register-bit-leds */
- if (of_property_match_string(child, "compatible",
- "register-bit-led") < 0)
- continue;
-
- sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
- if (!sled)
- return -ENOMEM;
-
- sled->map = map;
-
- if (of_property_read_u32(child, "offset", &sled->offset))
- return -EINVAL;
- if (of_property_read_u32(child, "mask", &sled->mask))
- return -EINVAL;
- sled->cdev.name =
- of_get_property(child, "label", NULL) ? : child->name;
- sled->cdev.default_trigger =
- of_get_property(child, "linux,default-trigger", NULL);
-
- state = of_get_property(child, "default-state", NULL);
- if (state) {
- if (!strcmp(state, "keep")) {
- u32 val;
-
- ret = regmap_read(map, sled->offset, &val);
- if (ret < 0)
- return ret;
- sled->state = !!(val & sled->mask);
- } else if (!strcmp(state, "on")) {
- sled->state = true;
- ret = regmap_update_bits(map, sled->offset,
- sled->mask,
- sled->mask);
- if (ret < 0)
- return ret;
- } else {
- sled->state = false;
- ret = regmap_update_bits(map, sled->offset,
- sled->mask, 0);
- if (ret < 0)
- return ret;
- }
+ parent = dev->parent;
+ if (!parent) {
+ dev_err(dev, "no parent for syscon LED\n");
+ return -ENODEV;
+ }
+ map = syscon_node_to_regmap(parent->of_node);
+ if (!map) {
+ dev_err(dev, "no regmap for syscon LED parent\n");
+ return -ENODEV;
+ }
+
+ sled = devm_kzalloc(dev, sizeof(*sled), GFP_KERNEL);
+ if (!sled)
+ return -ENOMEM;
+
+ sled->map = map;
+
+ if (of_property_read_u32(np, "offset", &sled->offset))
+ return -EINVAL;
+ if (of_property_read_u32(np, "mask", &sled->mask))
+ return -EINVAL;
+ sled->cdev.name =
+ of_get_property(np, "label", NULL) ? : np->name;
+ sled->cdev.default_trigger =
+ of_get_property(np, "linux,default-trigger", NULL);
+
+ state = of_get_property(np, "default-state", NULL);
+ if (state) {
+ if (!strcmp(state, "keep")) {
+ u32 val;
+
+ ret = regmap_read(map, sled->offset, &val);
+ if (ret < 0)
+ return ret;
+ sled->state = !!(val & sled->mask);
+ } else if (!strcmp(state, "on")) {
+ sled->state = true;
+ ret = regmap_update_bits(map, sled->offset,
+ sled->mask,
+ sled->mask);
+ if (ret < 0)
+ return ret;
+ } else {
+ sled->state = false;
+ ret = regmap_update_bits(map, sled->offset,
+ sled->mask, 0);
+ if (ret < 0)
+ return ret;
}
- sled->cdev.brightness_set = syscon_led_set;
+ }
+ sled->cdev.brightness_set = syscon_led_set;
- ret = led_classdev_register(dev, &sled->cdev);
- if (ret < 0)
- return ret;
+ ret = led_classdev_register(dev, &sled->cdev);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, sled);
+ dev_info(dev, "registered LED %s\n", sled->cdev.name);
- dev_info(dev, "registered LED %s\n", sled->cdev.name);
- }
return 0;
}
-static int __init syscon_leds_init(void)
+static int syscon_led_remove(struct platform_device *pdev)
{
- struct device_node *np;
-
- for_each_of_allnodes(np) {
- struct platform_device *pdev;
- struct regmap *map;
- int ret;
+ struct syscon_led *sled = platform_get_drvdata(pdev);
- if (!of_device_is_compatible(np, "syscon"))
- continue;
+ led_classdev_unregister(&sled->cdev);
+ /* Turn it off */
+ regmap_update_bits(sled->map, sled->offset, sled->mask, 0);
+ return 0;
+}
- map = syscon_node_to_regmap(np);
- if (IS_ERR(map)) {
- pr_err("error getting regmap for syscon LEDs\n");
- continue;
- }
+static const struct of_device_id of_syscon_leds_match[] = {
+ { .compatible = "register-bit-led", },
+ {},
+};
- /*
- * If the map is there, the device should be there, we allocate
- * memory on the syscon device's behalf here.
- */
- pdev = of_find_device_by_node(np);
- if (!pdev)
- return -ENODEV;
- ret = syscon_leds_spawn(np, &pdev->dev, map);
- if (ret)
- dev_err(&pdev->dev, "could not spawn syscon LEDs\n");
- }
+MODULE_DEVICE_TABLE(of, of_syscon_leds_match);
- return 0;
-}
-device_initcall(syscon_leds_init);
+static struct platform_driver syscon_led_driver = {
+ .probe = syscon_led_probe,
+ .remove = syscon_led_remove,
+ .driver = {
+ .name = "leds-syscon",
+ .of_match_table = of_syscon_leds_match,
+ },
+};
+module_platform_driver(syscon_led_driver);
err = -EBUSY;
}
spin_unlock(&mddev->lock);
- return err;
+ return err ?: len;
}
err = mddev_lock(mddev);
if (err)
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
else
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- flush_workqueue(md_misc_wq);
- if (mddev->sync_thread) {
- set_bit(MD_RECOVERY_INTR, &mddev->recovery);
- if (mddev_lock(mddev) == 0) {
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
+ mddev_lock(mddev) == 0) {
+ flush_workqueue(md_misc_wq);
+ if (mddev->sync_thread) {
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_reap_sync_thread(mddev);
- mddev_unlock(mddev);
}
+ mddev_unlock(mddev);
}
} else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
if (mddev_is_clustered(mddev))
md_cluster_ops->metadata_update_finish(mddev);
clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
+ clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+ clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+ clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
config MEDIA_CONTROLLER_DVB
bool "Enable Media controller for DVB"
depends on MEDIA_CONTROLLER
+ depends on BROKEN
---help---
Enable the media controller API support for DVB.
interfacing to a variety of asynchronous as well as synchronous
memory drives like NOR, NAND, OneNAND, SRAM.
+config OMAP_GPMC_DEBUG
+ bool
+ depends on OMAP_GPMC
+ help
+ Enables verbose debugging mostly to decode the bootloader provided
+ timings. Enable this during development to configure devices
+ connected to the GPMC bus.
+
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
default y
p->cycle2cyclediffcsen);
}
-#ifdef DEBUG
+#ifdef CONFIG_OMAP_GPMC_DEBUG
/**
* get_gpmc_timing_reg - read a timing parameter and print DTS settings for it.
* @cs: Chip Select Region
}
l = gpmc_cs_read_reg(cs, reg);
-#ifdef DEBUG
+#ifdef CONFIG_OMAP_GPMC_DEBUG
pr_info(
"GPMC CS%d: %-17s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
cs, name, ticks, gpmc_get_clk_period(cs, cd) * ticks / 1000,
GPMC_CONFIG1_CLKACTIVATIONTIME_MAX,
clk_activation, GPMC_CD_FCLK);
-#ifdef DEBUG
+#ifdef CONFIG_OMAP_GPMC_DEBUG
pr_info("GPMC CS%d CLK period is %lu ns (div %d)\n",
cs, (div * gpmc_get_fclk_period()) / 1000, div);
#endif
help
This driver supports the Memory Controller (MC) hardware found on
NVIDIA Tegra SoCs.
+
+config TEGRA124_EMC
+ bool "NVIDIA Tegra124 External Memory Controller driver"
+ default y
+ depends on TEGRA_MC && ARCH_TEGRA_124_SOC
+ help
+ This driver is for the External Memory Controller (EMC) found on
+ Tegra124 chips. The EMC controls the external DRAM on the board.
+ This driver is required to change memory timings / clock rate for
+ external memory.
tegra-mc-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30.o
tegra-mc-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114.o
tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra124.o
obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
+
+obj-$(CONFIG_TEGRA124_EMC) += tegra124-emc.o
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/sort.h>
+
+#include <soc/tegra/fuse.h>
#include "mc.h"
#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK 0x1ff
#define MC_EMEM_ARB_MISC0 0xd8
+#define MC_EMEM_ADR_CFG 0x54
+#define MC_EMEM_ADR_CFG_EMEM_NUMDEV BIT(0)
+
static const struct of_device_id tegra_mc_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
{ .compatible = "nvidia,tegra30-mc", .data = &tegra30_mc_soc },
#endif
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{ .compatible = "nvidia,tegra124-mc", .data = &tegra124_mc_soc },
+#endif
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+ { .compatible = "nvidia,tegra132-mc", .data = &tegra132_mc_soc },
#endif
{ }
};
return 0;
}
+void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate)
+{
+ unsigned int i;
+ struct tegra_mc_timing *timing = NULL;
+
+ for (i = 0; i < mc->num_timings; i++) {
+ if (mc->timings[i].rate == rate) {
+ timing = &mc->timings[i];
+ break;
+ }
+ }
+
+ if (!timing) {
+ dev_err(mc->dev, "no memory timing registered for rate %lu\n",
+ rate);
+ return;
+ }
+
+ for (i = 0; i < mc->soc->num_emem_regs; ++i)
+ mc_writel(mc, timing->emem_data[i], mc->soc->emem_regs[i]);
+}
+
+unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc)
+{
+ u8 dram_count;
+
+ dram_count = mc_readl(mc, MC_EMEM_ADR_CFG);
+ dram_count &= MC_EMEM_ADR_CFG_EMEM_NUMDEV;
+ dram_count++;
+
+ return dram_count;
+}
+
+static int load_one_timing(struct tegra_mc *mc,
+ struct tegra_mc_timing *timing,
+ struct device_node *node)
+{
+ int err;
+ u32 tmp;
+
+ err = of_property_read_u32(node, "clock-frequency", &tmp);
+ if (err) {
+ dev_err(mc->dev,
+ "timing %s: failed to read rate\n", node->name);
+ return err;
+ }
+
+ timing->rate = tmp;
+ timing->emem_data = devm_kcalloc(mc->dev, mc->soc->num_emem_regs,
+ sizeof(u32), GFP_KERNEL);
+ if (!timing->emem_data)
+ return -ENOMEM;
+
+ err = of_property_read_u32_array(node, "nvidia,emem-configuration",
+ timing->emem_data,
+ mc->soc->num_emem_regs);
+ if (err) {
+ dev_err(mc->dev,
+ "timing %s: failed to read EMEM configuration\n",
+ node->name);
+ return err;
+ }
+
+ return 0;
+}
+
+static int load_timings(struct tegra_mc *mc, struct device_node *node)
+{
+ struct device_node *child;
+ struct tegra_mc_timing *timing;
+ int child_count = of_get_child_count(node);
+ int i = 0, err;
+
+ mc->timings = devm_kcalloc(mc->dev, child_count, sizeof(*timing),
+ GFP_KERNEL);
+ if (!mc->timings)
+ return -ENOMEM;
+
+ mc->num_timings = child_count;
+
+ for_each_child_of_node(node, child) {
+ timing = &mc->timings[i++];
+
+ err = load_one_timing(mc, timing, child);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int tegra_mc_setup_timings(struct tegra_mc *mc)
+{
+ struct device_node *node;
+ u32 ram_code, node_ram_code;
+ int err;
+
+ ram_code = tegra_read_ram_code();
+
+ mc->num_timings = 0;
+
+ for_each_child_of_node(mc->dev->of_node, node) {
+ err = of_property_read_u32(node, "nvidia,ram-code",
+ &node_ram_code);
+ if (err || (node_ram_code != ram_code)) {
+ of_node_put(node);
+ continue;
+ }
+
+ err = load_timings(mc, node);
+ if (err)
+ return err;
+ of_node_put(node);
+ break;
+ }
+
+ if (mc->num_timings == 0)
+ dev_warn(mc->dev,
+ "no memory timings for RAM code %u registered\n",
+ ram_code);
+
+ return 0;
+}
+
static const char *const status_names[32] = {
[ 1] = "External interrupt",
[ 6] = "EMEM address decode error",
return err;
}
+ err = tegra_mc_setup_timings(mc);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to setup timings: %d\n", err);
+ return err;
+ }
+
if (IS_ENABLED(CONFIG_TEGRA_IOMMU_SMMU)) {
mc->smmu = tegra_smmu_probe(&pdev->dev, mc->soc->smmu, mc);
if (IS_ERR(mc->smmu)) {
value = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR |
MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE |
- MC_INT_ARBITRATION_EMEM | MC_INT_SECURITY_VIOLATION |
- MC_INT_DECERR_EMEM;
+ MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM;
+
mc_writel(mc, value, MC_INTMASK);
return 0;
extern const struct tegra_mc_soc tegra124_mc_soc;
#endif
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+extern const struct tegra_mc_soc tegra132_mc_soc;
+#endif
+
#endif /* MEMORY_TEGRA_MC_H */
};
static const struct tegra_smmu_swgroup tegra114_swgroups[] = {
- { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
- { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
- { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
- { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
- { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
- { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
- { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
- { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
- { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
- { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
- { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
- { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
- { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
- { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
- { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
- { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
+ { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
+ { .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
+ { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
+ { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
+ { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
+ { .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+ { .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
+ { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
};
static void tegra114_flush_dcache(struct page *page, unsigned long offset,
--- /dev/null
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Mikko Perttunen <mperttunen@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sort.h>
+#include <linux/string.h>
+
+#include <soc/tegra/emc.h>
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/mc.h>
+
+#define EMC_FBIO_CFG5 0x104
+#define EMC_FBIO_CFG5_DRAM_TYPE_MASK 0x3
+#define EMC_FBIO_CFG5_DRAM_TYPE_SHIFT 0
+
+#define EMC_INTSTATUS 0x0
+#define EMC_INTSTATUS_CLKCHANGE_COMPLETE BIT(4)
+
+#define EMC_CFG 0xc
+#define EMC_CFG_DRAM_CLKSTOP_PD BIT(31)
+#define EMC_CFG_DRAM_CLKSTOP_SR BIT(30)
+#define EMC_CFG_DRAM_ACPD BIT(29)
+#define EMC_CFG_DYN_SREF BIT(28)
+#define EMC_CFG_PWR_MASK ((0xF << 28) | BIT(18))
+#define EMC_CFG_DSR_VTTGEN_DRV_EN BIT(18)
+
+#define EMC_REFCTRL 0x20
+#define EMC_REFCTRL_DEV_SEL_SHIFT 0
+#define EMC_REFCTRL_ENABLE BIT(31)
+
+#define EMC_TIMING_CONTROL 0x28
+#define EMC_RC 0x2c
+#define EMC_RFC 0x30
+#define EMC_RAS 0x34
+#define EMC_RP 0x38
+#define EMC_R2W 0x3c
+#define EMC_W2R 0x40
+#define EMC_R2P 0x44
+#define EMC_W2P 0x48
+#define EMC_RD_RCD 0x4c
+#define EMC_WR_RCD 0x50
+#define EMC_RRD 0x54
+#define EMC_REXT 0x58
+#define EMC_WDV 0x5c
+#define EMC_QUSE 0x60
+#define EMC_QRST 0x64
+#define EMC_QSAFE 0x68
+#define EMC_RDV 0x6c
+#define EMC_REFRESH 0x70
+#define EMC_BURST_REFRESH_NUM 0x74
+#define EMC_PDEX2WR 0x78
+#define EMC_PDEX2RD 0x7c
+#define EMC_PCHG2PDEN 0x80
+#define EMC_ACT2PDEN 0x84
+#define EMC_AR2PDEN 0x88
+#define EMC_RW2PDEN 0x8c
+#define EMC_TXSR 0x90
+#define EMC_TCKE 0x94
+#define EMC_TFAW 0x98
+#define EMC_TRPAB 0x9c
+#define EMC_TCLKSTABLE 0xa0
+#define EMC_TCLKSTOP 0xa4
+#define EMC_TREFBW 0xa8
+#define EMC_ODT_WRITE 0xb0
+#define EMC_ODT_READ 0xb4
+#define EMC_WEXT 0xb8
+#define EMC_CTT 0xbc
+#define EMC_RFC_SLR 0xc0
+#define EMC_MRS_WAIT_CNT2 0xc4
+
+#define EMC_MRS_WAIT_CNT 0xc8
+#define EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT 0
+#define EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK \
+ (0x3FF << EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT)
+#define EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT 16
+#define EMC_MRS_WAIT_CNT_LONG_WAIT_MASK \
+ (0x3FF << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT)
+
+#define EMC_MRS 0xcc
+#define EMC_MODE_SET_DLL_RESET BIT(8)
+#define EMC_MODE_SET_LONG_CNT BIT(26)
+#define EMC_EMRS 0xd0
+#define EMC_REF 0xd4
+#define EMC_PRE 0xd8
+
+#define EMC_SELF_REF 0xe0
+#define EMC_SELF_REF_CMD_ENABLED BIT(0)
+#define EMC_SELF_REF_DEV_SEL_SHIFT 30
+
+#define EMC_MRW 0xe8
+
+#define EMC_MRR 0xec
+#define EMC_MRR_MA_SHIFT 16
+#define LPDDR2_MR4_TEMP_SHIFT 0
+
+#define EMC_XM2DQSPADCTRL3 0xf8
+#define EMC_FBIO_SPARE 0x100
+
+#define EMC_FBIO_CFG6 0x114
+#define EMC_EMRS2 0x12c
+#define EMC_MRW2 0x134
+#define EMC_MRW4 0x13c
+#define EMC_EINPUT 0x14c
+#define EMC_EINPUT_DURATION 0x150
+#define EMC_PUTERM_EXTRA 0x154
+#define EMC_TCKESR 0x158
+#define EMC_TPD 0x15c
+
+#define EMC_AUTO_CAL_CONFIG 0x2a4
+#define EMC_AUTO_CAL_CONFIG_AUTO_CAL_START BIT(31)
+#define EMC_AUTO_CAL_INTERVAL 0x2a8
+#define EMC_AUTO_CAL_STATUS 0x2ac
+#define EMC_AUTO_CAL_STATUS_ACTIVE BIT(31)
+#define EMC_STATUS 0x2b4
+#define EMC_STATUS_TIMING_UPDATE_STALLED BIT(23)
+
+#define EMC_CFG_2 0x2b8
+#define EMC_CFG_2_MODE_SHIFT 0
+#define EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR BIT(6)
+
+#define EMC_CFG_DIG_DLL 0x2bc
+#define EMC_CFG_DIG_DLL_PERIOD 0x2c0
+#define EMC_RDV_MASK 0x2cc
+#define EMC_WDV_MASK 0x2d0
+#define EMC_CTT_DURATION 0x2d8
+#define EMC_CTT_TERM_CTRL 0x2dc
+#define EMC_ZCAL_INTERVAL 0x2e0
+#define EMC_ZCAL_WAIT_CNT 0x2e4
+
+#define EMC_ZQ_CAL 0x2ec
+#define EMC_ZQ_CAL_CMD BIT(0)
+#define EMC_ZQ_CAL_LONG BIT(4)
+#define EMC_ZQ_CAL_LONG_CMD_DEV0 \
+ (DRAM_DEV_SEL_0 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD)
+#define EMC_ZQ_CAL_LONG_CMD_DEV1 \
+ (DRAM_DEV_SEL_1 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD)
+
+#define EMC_XM2CMDPADCTRL 0x2f0
+#define EMC_XM2DQSPADCTRL 0x2f8
+#define EMC_XM2DQSPADCTRL2 0x2fc
+#define EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE BIT(0)
+#define EMC_XM2DQSPADCTRL2_VREF_ENABLE BIT(5)
+#define EMC_XM2DQPADCTRL 0x300
+#define EMC_XM2DQPADCTRL2 0x304
+#define EMC_XM2CLKPADCTRL 0x308
+#define EMC_XM2COMPPADCTRL 0x30c
+#define EMC_XM2VTTGENPADCTRL 0x310
+#define EMC_XM2VTTGENPADCTRL2 0x314
+#define EMC_XM2VTTGENPADCTRL3 0x318
+#define EMC_XM2DQSPADCTRL4 0x320
+#define EMC_DLL_XFORM_DQS0 0x328
+#define EMC_DLL_XFORM_DQS1 0x32c
+#define EMC_DLL_XFORM_DQS2 0x330
+#define EMC_DLL_XFORM_DQS3 0x334
+#define EMC_DLL_XFORM_DQS4 0x338
+#define EMC_DLL_XFORM_DQS5 0x33c
+#define EMC_DLL_XFORM_DQS6 0x340
+#define EMC_DLL_XFORM_DQS7 0x344
+#define EMC_DLL_XFORM_QUSE0 0x348
+#define EMC_DLL_XFORM_QUSE1 0x34c
+#define EMC_DLL_XFORM_QUSE2 0x350
+#define EMC_DLL_XFORM_QUSE3 0x354
+#define EMC_DLL_XFORM_QUSE4 0x358
+#define EMC_DLL_XFORM_QUSE5 0x35c
+#define EMC_DLL_XFORM_QUSE6 0x360
+#define EMC_DLL_XFORM_QUSE7 0x364
+#define EMC_DLL_XFORM_DQ0 0x368
+#define EMC_DLL_XFORM_DQ1 0x36c
+#define EMC_DLL_XFORM_DQ2 0x370
+#define EMC_DLL_XFORM_DQ3 0x374
+#define EMC_DLI_TRIM_TXDQS0 0x3a8
+#define EMC_DLI_TRIM_TXDQS1 0x3ac
+#define EMC_DLI_TRIM_TXDQS2 0x3b0
+#define EMC_DLI_TRIM_TXDQS3 0x3b4
+#define EMC_DLI_TRIM_TXDQS4 0x3b8
+#define EMC_DLI_TRIM_TXDQS5 0x3bc
+#define EMC_DLI_TRIM_TXDQS6 0x3c0
+#define EMC_DLI_TRIM_TXDQS7 0x3c4
+#define EMC_STALL_THEN_EXE_AFTER_CLKCHANGE 0x3cc
+#define EMC_SEL_DPD_CTRL 0x3d8
+#define EMC_SEL_DPD_CTRL_DATA_SEL_DPD BIT(8)
+#define EMC_SEL_DPD_CTRL_ODT_SEL_DPD BIT(5)
+#define EMC_SEL_DPD_CTRL_RESET_SEL_DPD BIT(4)
+#define EMC_SEL_DPD_CTRL_CA_SEL_DPD BIT(3)
+#define EMC_SEL_DPD_CTRL_CLK_SEL_DPD BIT(2)
+#define EMC_SEL_DPD_CTRL_DDR3_MASK \
+ ((0xf << 2) | BIT(8))
+#define EMC_SEL_DPD_CTRL_MASK \
+ ((0x3 << 2) | BIT(5) | BIT(8))
+#define EMC_PRE_REFRESH_REQ_CNT 0x3dc
+#define EMC_DYN_SELF_REF_CONTROL 0x3e0
+#define EMC_TXSRDLL 0x3e4
+#define EMC_CCFIFO_ADDR 0x3e8
+#define EMC_CCFIFO_DATA 0x3ec
+#define EMC_CCFIFO_STATUS 0x3f0
+#define EMC_CDB_CNTL_1 0x3f4
+#define EMC_CDB_CNTL_2 0x3f8
+#define EMC_XM2CLKPADCTRL2 0x3fc
+#define EMC_AUTO_CAL_CONFIG2 0x458
+#define EMC_AUTO_CAL_CONFIG3 0x45c
+#define EMC_IBDLY 0x468
+#define EMC_DLL_XFORM_ADDR0 0x46c
+#define EMC_DLL_XFORM_ADDR1 0x470
+#define EMC_DLL_XFORM_ADDR2 0x474
+#define EMC_DSR_VTTGEN_DRV 0x47c
+#define EMC_TXDSRVTTGEN 0x480
+#define EMC_XM2CMDPADCTRL4 0x484
+#define EMC_XM2CMDPADCTRL5 0x488
+#define EMC_DLL_XFORM_DQS8 0x4a0
+#define EMC_DLL_XFORM_DQS9 0x4a4
+#define EMC_DLL_XFORM_DQS10 0x4a8
+#define EMC_DLL_XFORM_DQS11 0x4ac
+#define EMC_DLL_XFORM_DQS12 0x4b0
+#define EMC_DLL_XFORM_DQS13 0x4b4
+#define EMC_DLL_XFORM_DQS14 0x4b8
+#define EMC_DLL_XFORM_DQS15 0x4bc
+#define EMC_DLL_XFORM_QUSE8 0x4c0
+#define EMC_DLL_XFORM_QUSE9 0x4c4
+#define EMC_DLL_XFORM_QUSE10 0x4c8
+#define EMC_DLL_XFORM_QUSE11 0x4cc
+#define EMC_DLL_XFORM_QUSE12 0x4d0
+#define EMC_DLL_XFORM_QUSE13 0x4d4
+#define EMC_DLL_XFORM_QUSE14 0x4d8
+#define EMC_DLL_XFORM_QUSE15 0x4dc
+#define EMC_DLL_XFORM_DQ4 0x4e0
+#define EMC_DLL_XFORM_DQ5 0x4e4
+#define EMC_DLL_XFORM_DQ6 0x4e8
+#define EMC_DLL_XFORM_DQ7 0x4ec
+#define EMC_DLI_TRIM_TXDQS8 0x520
+#define EMC_DLI_TRIM_TXDQS9 0x524
+#define EMC_DLI_TRIM_TXDQS10 0x528
+#define EMC_DLI_TRIM_TXDQS11 0x52c
+#define EMC_DLI_TRIM_TXDQS12 0x530
+#define EMC_DLI_TRIM_TXDQS13 0x534
+#define EMC_DLI_TRIM_TXDQS14 0x538
+#define EMC_DLI_TRIM_TXDQS15 0x53c
+#define EMC_CDB_CNTL_3 0x540
+#define EMC_XM2DQSPADCTRL5 0x544
+#define EMC_XM2DQSPADCTRL6 0x548
+#define EMC_XM2DQPADCTRL3 0x54c
+#define EMC_DLL_XFORM_ADDR3 0x550
+#define EMC_DLL_XFORM_ADDR4 0x554
+#define EMC_DLL_XFORM_ADDR5 0x558
+#define EMC_CFG_PIPE 0x560
+#define EMC_QPOP 0x564
+#define EMC_QUSE_WIDTH 0x568
+#define EMC_PUTERM_WIDTH 0x56c
+#define EMC_BGBIAS_CTL0 0x570
+#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX BIT(3)
+#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN BIT(2)
+#define EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD BIT(1)
+#define EMC_PUTERM_ADJ 0x574
+
+#define DRAM_DEV_SEL_ALL 0
+#define DRAM_DEV_SEL_0 (2 << 30)
+#define DRAM_DEV_SEL_1 (1 << 30)
+
+#define EMC_CFG_POWER_FEATURES_MASK \
+ (EMC_CFG_DYN_SREF | EMC_CFG_DRAM_ACPD | EMC_CFG_DRAM_CLKSTOP_SR | \
+ EMC_CFG_DRAM_CLKSTOP_PD | EMC_CFG_DSR_VTTGEN_DRV_EN)
+#define EMC_REFCTRL_DEV_SEL(n) (((n > 1) ? 0 : 2) << EMC_REFCTRL_DEV_SEL_SHIFT)
+#define EMC_DRAM_DEV_SEL(n) ((n > 1) ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0)
+
+/* Maximum amount of time in us. to wait for changes to become effective */
+#define EMC_STATUS_UPDATE_TIMEOUT 1000
+
+enum emc_dram_type {
+ DRAM_TYPE_DDR3 = 0,
+ DRAM_TYPE_DDR1 = 1,
+ DRAM_TYPE_LPDDR3 = 2,
+ DRAM_TYPE_DDR2 = 3
+};
+
+enum emc_dll_change {
+ DLL_CHANGE_NONE,
+ DLL_CHANGE_ON,
+ DLL_CHANGE_OFF
+};
+
+static const unsigned long emc_burst_regs[] = {
+ EMC_RC,
+ EMC_RFC,
+ EMC_RFC_SLR,
+ EMC_RAS,
+ EMC_RP,
+ EMC_R2W,
+ EMC_W2R,
+ EMC_R2P,
+ EMC_W2P,
+ EMC_RD_RCD,
+ EMC_WR_RCD,
+ EMC_RRD,
+ EMC_REXT,
+ EMC_WEXT,
+ EMC_WDV,
+ EMC_WDV_MASK,
+ EMC_QUSE,
+ EMC_QUSE_WIDTH,
+ EMC_IBDLY,
+ EMC_EINPUT,
+ EMC_EINPUT_DURATION,
+ EMC_PUTERM_EXTRA,
+ EMC_PUTERM_WIDTH,
+ EMC_PUTERM_ADJ,
+ EMC_CDB_CNTL_1,
+ EMC_CDB_CNTL_2,
+ EMC_CDB_CNTL_3,
+ EMC_QRST,
+ EMC_QSAFE,
+ EMC_RDV,
+ EMC_RDV_MASK,
+ EMC_REFRESH,
+ EMC_BURST_REFRESH_NUM,
+ EMC_PRE_REFRESH_REQ_CNT,
+ EMC_PDEX2WR,
+ EMC_PDEX2RD,
+ EMC_PCHG2PDEN,
+ EMC_ACT2PDEN,
+ EMC_AR2PDEN,
+ EMC_RW2PDEN,
+ EMC_TXSR,
+ EMC_TXSRDLL,
+ EMC_TCKE,
+ EMC_TCKESR,
+ EMC_TPD,
+ EMC_TFAW,
+ EMC_TRPAB,
+ EMC_TCLKSTABLE,
+ EMC_TCLKSTOP,
+ EMC_TREFBW,
+ EMC_FBIO_CFG6,
+ EMC_ODT_WRITE,
+ EMC_ODT_READ,
+ EMC_FBIO_CFG5,
+ EMC_CFG_DIG_DLL,
+ EMC_CFG_DIG_DLL_PERIOD,
+ EMC_DLL_XFORM_DQS0,
+ EMC_DLL_XFORM_DQS1,
+ EMC_DLL_XFORM_DQS2,
+ EMC_DLL_XFORM_DQS3,
+ EMC_DLL_XFORM_DQS4,
+ EMC_DLL_XFORM_DQS5,
+ EMC_DLL_XFORM_DQS6,
+ EMC_DLL_XFORM_DQS7,
+ EMC_DLL_XFORM_DQS8,
+ EMC_DLL_XFORM_DQS9,
+ EMC_DLL_XFORM_DQS10,
+ EMC_DLL_XFORM_DQS11,
+ EMC_DLL_XFORM_DQS12,
+ EMC_DLL_XFORM_DQS13,
+ EMC_DLL_XFORM_DQS14,
+ EMC_DLL_XFORM_DQS15,
+ EMC_DLL_XFORM_QUSE0,
+ EMC_DLL_XFORM_QUSE1,
+ EMC_DLL_XFORM_QUSE2,
+ EMC_DLL_XFORM_QUSE3,
+ EMC_DLL_XFORM_QUSE4,
+ EMC_DLL_XFORM_QUSE5,
+ EMC_DLL_XFORM_QUSE6,
+ EMC_DLL_XFORM_QUSE7,
+ EMC_DLL_XFORM_ADDR0,
+ EMC_DLL_XFORM_ADDR1,
+ EMC_DLL_XFORM_ADDR2,
+ EMC_DLL_XFORM_ADDR3,
+ EMC_DLL_XFORM_ADDR4,
+ EMC_DLL_XFORM_ADDR5,
+ EMC_DLL_XFORM_QUSE8,
+ EMC_DLL_XFORM_QUSE9,
+ EMC_DLL_XFORM_QUSE10,
+ EMC_DLL_XFORM_QUSE11,
+ EMC_DLL_XFORM_QUSE12,
+ EMC_DLL_XFORM_QUSE13,
+ EMC_DLL_XFORM_QUSE14,
+ EMC_DLL_XFORM_QUSE15,
+ EMC_DLI_TRIM_TXDQS0,
+ EMC_DLI_TRIM_TXDQS1,
+ EMC_DLI_TRIM_TXDQS2,
+ EMC_DLI_TRIM_TXDQS3,
+ EMC_DLI_TRIM_TXDQS4,
+ EMC_DLI_TRIM_TXDQS5,
+ EMC_DLI_TRIM_TXDQS6,
+ EMC_DLI_TRIM_TXDQS7,
+ EMC_DLI_TRIM_TXDQS8,
+ EMC_DLI_TRIM_TXDQS9,
+ EMC_DLI_TRIM_TXDQS10,
+ EMC_DLI_TRIM_TXDQS11,
+ EMC_DLI_TRIM_TXDQS12,
+ EMC_DLI_TRIM_TXDQS13,
+ EMC_DLI_TRIM_TXDQS14,
+ EMC_DLI_TRIM_TXDQS15,
+ EMC_DLL_XFORM_DQ0,
+ EMC_DLL_XFORM_DQ1,
+ EMC_DLL_XFORM_DQ2,
+ EMC_DLL_XFORM_DQ3,
+ EMC_DLL_XFORM_DQ4,
+ EMC_DLL_XFORM_DQ5,
+ EMC_DLL_XFORM_DQ6,
+ EMC_DLL_XFORM_DQ7,
+ EMC_XM2CMDPADCTRL,
+ EMC_XM2CMDPADCTRL4,
+ EMC_XM2CMDPADCTRL5,
+ EMC_XM2DQPADCTRL2,
+ EMC_XM2DQPADCTRL3,
+ EMC_XM2CLKPADCTRL,
+ EMC_XM2CLKPADCTRL2,
+ EMC_XM2COMPPADCTRL,
+ EMC_XM2VTTGENPADCTRL,
+ EMC_XM2VTTGENPADCTRL2,
+ EMC_XM2VTTGENPADCTRL3,
+ EMC_XM2DQSPADCTRL3,
+ EMC_XM2DQSPADCTRL4,
+ EMC_XM2DQSPADCTRL5,
+ EMC_XM2DQSPADCTRL6,
+ EMC_DSR_VTTGEN_DRV,
+ EMC_TXDSRVTTGEN,
+ EMC_FBIO_SPARE,
+ EMC_ZCAL_WAIT_CNT,
+ EMC_MRS_WAIT_CNT2,
+ EMC_CTT,
+ EMC_CTT_DURATION,
+ EMC_CFG_PIPE,
+ EMC_DYN_SELF_REF_CONTROL,
+ EMC_QPOP
+};
+
+struct emc_timing {
+ unsigned long rate;
+
+ u32 emc_burst_data[ARRAY_SIZE(emc_burst_regs)];
+
+ u32 emc_auto_cal_config;
+ u32 emc_auto_cal_config2;
+ u32 emc_auto_cal_config3;
+ u32 emc_auto_cal_interval;
+ u32 emc_bgbias_ctl0;
+ u32 emc_cfg;
+ u32 emc_cfg_2;
+ u32 emc_ctt_term_ctrl;
+ u32 emc_mode_1;
+ u32 emc_mode_2;
+ u32 emc_mode_4;
+ u32 emc_mode_reset;
+ u32 emc_mrs_wait_cnt;
+ u32 emc_sel_dpd_ctrl;
+ u32 emc_xm2dqspadctrl2;
+ u32 emc_zcal_cnt_long;
+ u32 emc_zcal_interval;
+};
+
+struct tegra_emc {
+ struct device *dev;
+
+ struct tegra_mc *mc;
+
+ void __iomem *regs;
+
+ enum emc_dram_type dram_type;
+ unsigned int dram_num;
+
+ struct emc_timing last_timing;
+ struct emc_timing *timings;
+ unsigned int num_timings;
+};
+
+/* Timing change sequence functions */
+
+static void emc_ccfifo_writel(struct tegra_emc *emc, u32 value,
+ unsigned long offset)
+{
+ writel(value, emc->regs + EMC_CCFIFO_DATA);
+ writel(offset, emc->regs + EMC_CCFIFO_ADDR);
+}
+
+static void emc_seq_update_timing(struct tegra_emc *emc)
+{
+ unsigned int i;
+ u32 value;
+
+ writel(1, emc->regs + EMC_TIMING_CONTROL);
+
+ for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) {
+ value = readl(emc->regs + EMC_STATUS);
+ if ((value & EMC_STATUS_TIMING_UPDATE_STALLED) == 0)
+ return;
+ udelay(1);
+ }
+
+ dev_err(emc->dev, "timing update timed out\n");
+}
+
+static void emc_seq_disable_auto_cal(struct tegra_emc *emc)
+{
+ unsigned int i;
+ u32 value;
+
+ writel(0, emc->regs + EMC_AUTO_CAL_INTERVAL);
+
+ for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) {
+ value = readl(emc->regs + EMC_AUTO_CAL_STATUS);
+ if ((value & EMC_AUTO_CAL_STATUS_ACTIVE) == 0)
+ return;
+ udelay(1);
+ }
+
+ dev_err(emc->dev, "auto cal disable timed out\n");
+}
+
+static void emc_seq_wait_clkchange(struct tegra_emc *emc)
+{
+ unsigned int i;
+ u32 value;
+
+ for (i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; ++i) {
+ value = readl(emc->regs + EMC_INTSTATUS);
+ if (value & EMC_INTSTATUS_CLKCHANGE_COMPLETE)
+ return;
+ udelay(1);
+ }
+
+ dev_err(emc->dev, "clock change timed out\n");
+}
+
+static struct emc_timing *tegra_emc_find_timing(struct tegra_emc *emc,
+ unsigned long rate)
+{
+ struct emc_timing *timing = NULL;
+ unsigned int i;
+
+ for (i = 0; i < emc->num_timings; i++) {
+ if (emc->timings[i].rate == rate) {
+ timing = &emc->timings[i];
+ break;
+ }
+ }
+
+ if (!timing) {
+ dev_err(emc->dev, "no timing for rate %lu\n", rate);
+ return NULL;
+ }
+
+ return timing;
+}
+
+int tegra_emc_prepare_timing_change(struct tegra_emc *emc,
+ unsigned long rate)
+{
+ struct emc_timing *timing = tegra_emc_find_timing(emc, rate);
+ struct emc_timing *last = &emc->last_timing;
+ enum emc_dll_change dll_change;
+ unsigned int pre_wait = 0;
+ u32 val, val2, mask;
+ bool update = false;
+ unsigned int i;
+
+ if (!timing)
+ return -ENOENT;
+
+ if ((last->emc_mode_1 & 0x1) == (timing->emc_mode_1 & 0x1))
+ dll_change = DLL_CHANGE_NONE;
+ else if (timing->emc_mode_1 & 0x1)
+ dll_change = DLL_CHANGE_ON;
+ else
+ dll_change = DLL_CHANGE_OFF;
+
+ /* Clear CLKCHANGE_COMPLETE interrupts */
+ writel(EMC_INTSTATUS_CLKCHANGE_COMPLETE, emc->regs + EMC_INTSTATUS);
+
+ /* Disable dynamic self-refresh */
+ val = readl(emc->regs + EMC_CFG);
+ if (val & EMC_CFG_PWR_MASK) {
+ val &= ~EMC_CFG_POWER_FEATURES_MASK;
+ writel(val, emc->regs + EMC_CFG);
+
+ pre_wait = 5;
+ }
+
+ /* Disable SEL_DPD_CTRL for clock change */
+ if (emc->dram_type == DRAM_TYPE_DDR3)
+ mask = EMC_SEL_DPD_CTRL_DDR3_MASK;
+ else
+ mask = EMC_SEL_DPD_CTRL_MASK;
+
+ val = readl(emc->regs + EMC_SEL_DPD_CTRL);
+ if (val & mask) {
+ val &= ~mask;
+ writel(val, emc->regs + EMC_SEL_DPD_CTRL);
+ }
+
+ /* Prepare DQ/DQS for clock change */
+ val = readl(emc->regs + EMC_BGBIAS_CTL0);
+ val2 = last->emc_bgbias_ctl0;
+ if (!(timing->emc_bgbias_ctl0 &
+ EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX) &&
+ (val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX)) {
+ val2 &= ~EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX;
+ update = true;
+ }
+
+ if ((val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD) ||
+ (val & EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN)) {
+ update = true;
+ }
+
+ if (update) {
+ writel(val2, emc->regs + EMC_BGBIAS_CTL0);
+ if (pre_wait < 5)
+ pre_wait = 5;
+ }
+
+ update = false;
+ val = readl(emc->regs + EMC_XM2DQSPADCTRL2);
+ if (timing->emc_xm2dqspadctrl2 & EMC_XM2DQSPADCTRL2_VREF_ENABLE &&
+ !(val & EMC_XM2DQSPADCTRL2_VREF_ENABLE)) {
+ val |= EMC_XM2DQSPADCTRL2_VREF_ENABLE;
+ update = true;
+ }
+
+ if (timing->emc_xm2dqspadctrl2 & EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE &&
+ !(val & EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE)) {
+ val |= EMC_XM2DQSPADCTRL2_RX_FT_REC_ENABLE;
+ update = true;
+ }
+
+ if (update) {
+ writel(val, emc->regs + EMC_XM2DQSPADCTRL2);
+ if (pre_wait < 30)
+ pre_wait = 30;
+ }
+
+ /* Wait to settle */
+ if (pre_wait) {
+ emc_seq_update_timing(emc);
+ udelay(pre_wait);
+ }
+
+ /* Program CTT_TERM control */
+ if (last->emc_ctt_term_ctrl != timing->emc_ctt_term_ctrl) {
+ emc_seq_disable_auto_cal(emc);
+ writel(timing->emc_ctt_term_ctrl,
+ emc->regs + EMC_CTT_TERM_CTRL);
+ emc_seq_update_timing(emc);
+ }
+
+ /* Program burst shadow registers */
+ for (i = 0; i < ARRAY_SIZE(timing->emc_burst_data); ++i)
+ writel(timing->emc_burst_data[i],
+ emc->regs + emc_burst_regs[i]);
+
+ writel(timing->emc_xm2dqspadctrl2, emc->regs + EMC_XM2DQSPADCTRL2);
+ writel(timing->emc_zcal_interval, emc->regs + EMC_ZCAL_INTERVAL);
+
+ tegra_mc_write_emem_configuration(emc->mc, timing->rate);
+
+ val = timing->emc_cfg & ~EMC_CFG_POWER_FEATURES_MASK;
+ emc_ccfifo_writel(emc, val, EMC_CFG);
+
+ /* Program AUTO_CAL_CONFIG */
+ if (timing->emc_auto_cal_config2 != last->emc_auto_cal_config2)
+ emc_ccfifo_writel(emc, timing->emc_auto_cal_config2,
+ EMC_AUTO_CAL_CONFIG2);
+
+ if (timing->emc_auto_cal_config3 != last->emc_auto_cal_config3)
+ emc_ccfifo_writel(emc, timing->emc_auto_cal_config3,
+ EMC_AUTO_CAL_CONFIG3);
+
+ if (timing->emc_auto_cal_config != last->emc_auto_cal_config) {
+ val = timing->emc_auto_cal_config;
+ val &= EMC_AUTO_CAL_CONFIG_AUTO_CAL_START;
+ emc_ccfifo_writel(emc, val, EMC_AUTO_CAL_CONFIG);
+ }
+
+ /* DDR3: predict MRS long wait count */
+ if (emc->dram_type == DRAM_TYPE_DDR3 &&
+ dll_change == DLL_CHANGE_ON) {
+ u32 cnt = 512;
+
+ if (timing->emc_zcal_interval != 0 &&
+ last->emc_zcal_interval == 0)
+ cnt -= emc->dram_num * 256;
+
+ val = (timing->emc_mrs_wait_cnt
+ & EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK)
+ >> EMC_MRS_WAIT_CNT_SHORT_WAIT_SHIFT;
+ if (cnt < val)
+ cnt = val;
+
+ val = timing->emc_mrs_wait_cnt
+ & ~EMC_MRS_WAIT_CNT_LONG_WAIT_MASK;
+ val |= (cnt << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT)
+ & EMC_MRS_WAIT_CNT_LONG_WAIT_MASK;
+
+ writel(val, emc->regs + EMC_MRS_WAIT_CNT);
+ }
+
+ val = timing->emc_cfg_2;
+ val &= ~EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR;
+ emc_ccfifo_writel(emc, val, EMC_CFG_2);
+
+ /* DDR3: Turn off DLL and enter self-refresh */
+ if (emc->dram_type == DRAM_TYPE_DDR3 && dll_change == DLL_CHANGE_OFF)
+ emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_EMRS);
+
+ /* Disable refresh controller */
+ emc_ccfifo_writel(emc, EMC_REFCTRL_DEV_SEL(emc->dram_num),
+ EMC_REFCTRL);
+ if (emc->dram_type == DRAM_TYPE_DDR3)
+ emc_ccfifo_writel(emc, EMC_DRAM_DEV_SEL(emc->dram_num) |
+ EMC_SELF_REF_CMD_ENABLED,
+ EMC_SELF_REF);
+
+ /* Flow control marker */
+ emc_ccfifo_writel(emc, 1, EMC_STALL_THEN_EXE_AFTER_CLKCHANGE);
+
+ /* DDR3: Exit self-refresh */
+ if (emc->dram_type == DRAM_TYPE_DDR3)
+ emc_ccfifo_writel(emc, EMC_DRAM_DEV_SEL(emc->dram_num),
+ EMC_SELF_REF);
+ emc_ccfifo_writel(emc, EMC_REFCTRL_DEV_SEL(emc->dram_num) |
+ EMC_REFCTRL_ENABLE,
+ EMC_REFCTRL);
+
+ /* Set DRAM mode registers */
+ if (emc->dram_type == DRAM_TYPE_DDR3) {
+ if (timing->emc_mode_1 != last->emc_mode_1)
+ emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_EMRS);
+ if (timing->emc_mode_2 != last->emc_mode_2)
+ emc_ccfifo_writel(emc, timing->emc_mode_2, EMC_EMRS2);
+
+ if ((timing->emc_mode_reset != last->emc_mode_reset) ||
+ dll_change == DLL_CHANGE_ON) {
+ val = timing->emc_mode_reset;
+ if (dll_change == DLL_CHANGE_ON) {
+ val |= EMC_MODE_SET_DLL_RESET;
+ val |= EMC_MODE_SET_LONG_CNT;
+ } else {
+ val &= ~EMC_MODE_SET_DLL_RESET;
+ }
+ emc_ccfifo_writel(emc, val, EMC_MRS);
+ }
+ } else {
+ if (timing->emc_mode_2 != last->emc_mode_2)
+ emc_ccfifo_writel(emc, timing->emc_mode_2, EMC_MRW2);
+ if (timing->emc_mode_1 != last->emc_mode_1)
+ emc_ccfifo_writel(emc, timing->emc_mode_1, EMC_MRW);
+ if (timing->emc_mode_4 != last->emc_mode_4)
+ emc_ccfifo_writel(emc, timing->emc_mode_4, EMC_MRW4);
+ }
+
+ /* Issue ZCAL command if turning ZCAL on */
+ if (timing->emc_zcal_interval != 0 && last->emc_zcal_interval == 0) {
+ emc_ccfifo_writel(emc, EMC_ZQ_CAL_LONG_CMD_DEV0, EMC_ZQ_CAL);
+ if (emc->dram_num > 1)
+ emc_ccfifo_writel(emc, EMC_ZQ_CAL_LONG_CMD_DEV1,
+ EMC_ZQ_CAL);
+ }
+
+ /* Write to RO register to remove stall after change */
+ emc_ccfifo_writel(emc, 0, EMC_CCFIFO_STATUS);
+
+ if (timing->emc_cfg_2 & EMC_CFG_2_DIS_STP_OB_CLK_DURING_NON_WR)
+ emc_ccfifo_writel(emc, timing->emc_cfg_2, EMC_CFG_2);
+
+ /* Disable AUTO_CAL for clock change */
+ emc_seq_disable_auto_cal(emc);
+
+ /* Read register to wait until programming has settled */
+ readl(emc->regs + EMC_INTSTATUS);
+
+ return 0;
+}
+
+void tegra_emc_complete_timing_change(struct tegra_emc *emc,
+ unsigned long rate)
+{
+ struct emc_timing *timing = tegra_emc_find_timing(emc, rate);
+ struct emc_timing *last = &emc->last_timing;
+ u32 val;
+
+ if (!timing)
+ return;
+
+ /* Wait until the state machine has settled */
+ emc_seq_wait_clkchange(emc);
+
+ /* Restore AUTO_CAL */
+ if (timing->emc_ctt_term_ctrl != last->emc_ctt_term_ctrl)
+ writel(timing->emc_auto_cal_interval,
+ emc->regs + EMC_AUTO_CAL_INTERVAL);
+
+ /* Restore dynamic self-refresh */
+ if (timing->emc_cfg & EMC_CFG_PWR_MASK)
+ writel(timing->emc_cfg, emc->regs + EMC_CFG);
+
+ /* Set ZCAL wait count */
+ writel(timing->emc_zcal_cnt_long, emc->regs + EMC_ZCAL_WAIT_CNT);
+
+ /* LPDDR3: Turn off BGBIAS if low frequency */
+ if (emc->dram_type == DRAM_TYPE_LPDDR3 &&
+ timing->emc_bgbias_ctl0 &
+ EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_RX) {
+ val = timing->emc_bgbias_ctl0;
+ val |= EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD_IBIAS_VTTGEN;
+ val |= EMC_BGBIAS_CTL0_BIAS0_DSC_E_PWRD;
+ writel(val, emc->regs + EMC_BGBIAS_CTL0);
+ } else {
+ if (emc->dram_type == DRAM_TYPE_DDR3 &&
+ readl(emc->regs + EMC_BGBIAS_CTL0) !=
+ timing->emc_bgbias_ctl0) {
+ writel(timing->emc_bgbias_ctl0,
+ emc->regs + EMC_BGBIAS_CTL0);
+ }
+
+ writel(timing->emc_auto_cal_interval,
+ emc->regs + EMC_AUTO_CAL_INTERVAL);
+ }
+
+ /* Wait for timing to settle */
+ udelay(2);
+
+ /* Reprogram SEL_DPD_CTRL */
+ writel(timing->emc_sel_dpd_ctrl, emc->regs + EMC_SEL_DPD_CTRL);
+ emc_seq_update_timing(emc);
+
+ emc->last_timing = *timing;
+}
+
+/* Initialization and deinitialization */
+
+static void emc_read_current_timing(struct tegra_emc *emc,
+ struct emc_timing *timing)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(emc_burst_regs); ++i)
+ timing->emc_burst_data[i] =
+ readl(emc->regs + emc_burst_regs[i]);
+
+ timing->emc_cfg = readl(emc->regs + EMC_CFG);
+
+ timing->emc_auto_cal_interval = 0;
+ timing->emc_zcal_cnt_long = 0;
+ timing->emc_mode_1 = 0;
+ timing->emc_mode_2 = 0;
+ timing->emc_mode_4 = 0;
+ timing->emc_mode_reset = 0;
+}
+
+static int emc_init(struct tegra_emc *emc)
+{
+ emc->dram_type = readl(emc->regs + EMC_FBIO_CFG5);
+ emc->dram_type &= EMC_FBIO_CFG5_DRAM_TYPE_MASK;
+ emc->dram_type >>= EMC_FBIO_CFG5_DRAM_TYPE_SHIFT;
+
+ emc->dram_num = tegra_mc_get_emem_device_count(emc->mc);
+
+ emc_read_current_timing(emc, &emc->last_timing);
+
+ return 0;
+}
+
+static int load_one_timing_from_dt(struct tegra_emc *emc,
+ struct emc_timing *timing,
+ struct device_node *node)
+{
+ u32 value;
+ int err;
+
+ err = of_property_read_u32(node, "clock-frequency", &value);
+ if (err) {
+ dev_err(emc->dev, "timing %s: failed to read rate: %d\n",
+ node->name, err);
+ return err;
+ }
+
+ timing->rate = value;
+
+ err = of_property_read_u32_array(node, "nvidia,emc-configuration",
+ timing->emc_burst_data,
+ ARRAY_SIZE(timing->emc_burst_data));
+ if (err) {
+ dev_err(emc->dev,
+ "timing %s: failed to read emc burst data: %d\n",
+ node->name, err);
+ return err;
+ }
+
+#define EMC_READ_PROP(prop, dtprop) { \
+ err = of_property_read_u32(node, dtprop, &timing->prop); \
+ if (err) { \
+ dev_err(emc->dev, "timing %s: failed to read " #prop ": %d\n", \
+ node->name, err); \
+ return err; \
+ } \
+}
+
+ EMC_READ_PROP(emc_auto_cal_config, "nvidia,emc-auto-cal-config")
+ EMC_READ_PROP(emc_auto_cal_config2, "nvidia,emc-auto-cal-config2")
+ EMC_READ_PROP(emc_auto_cal_config3, "nvidia,emc-auto-cal-config3")
+ EMC_READ_PROP(emc_auto_cal_interval, "nvidia,emc-auto-cal-interval")
+ EMC_READ_PROP(emc_bgbias_ctl0, "nvidia,emc-bgbias-ctl0")
+ EMC_READ_PROP(emc_cfg, "nvidia,emc-cfg")
+ EMC_READ_PROP(emc_cfg_2, "nvidia,emc-cfg-2")
+ EMC_READ_PROP(emc_ctt_term_ctrl, "nvidia,emc-ctt-term-ctrl")
+ EMC_READ_PROP(emc_mode_1, "nvidia,emc-mode-1")
+ EMC_READ_PROP(emc_mode_2, "nvidia,emc-mode-2")
+ EMC_READ_PROP(emc_mode_4, "nvidia,emc-mode-4")
+ EMC_READ_PROP(emc_mode_reset, "nvidia,emc-mode-reset")
+ EMC_READ_PROP(emc_mrs_wait_cnt, "nvidia,emc-mrs-wait-cnt")
+ EMC_READ_PROP(emc_sel_dpd_ctrl, "nvidia,emc-sel-dpd-ctrl")
+ EMC_READ_PROP(emc_xm2dqspadctrl2, "nvidia,emc-xm2dqspadctrl2")
+ EMC_READ_PROP(emc_zcal_cnt_long, "nvidia,emc-zcal-cnt-long")
+ EMC_READ_PROP(emc_zcal_interval, "nvidia,emc-zcal-interval")
+
+#undef EMC_READ_PROP
+
+ return 0;
+}
+
+static int cmp_timings(const void *_a, const void *_b)
+{
+ const struct emc_timing *a = _a;
+ const struct emc_timing *b = _b;
+
+ if (a->rate < b->rate)
+ return -1;
+ else if (a->rate == b->rate)
+ return 0;
+ else
+ return 1;
+}
+
+static int tegra_emc_load_timings_from_dt(struct tegra_emc *emc,
+ struct device_node *node)
+{
+ int child_count = of_get_child_count(node);
+ struct device_node *child;
+ struct emc_timing *timing;
+ unsigned int i = 0;
+ int err;
+
+ emc->timings = devm_kcalloc(emc->dev, child_count, sizeof(*timing),
+ GFP_KERNEL);
+ if (!emc->timings)
+ return -ENOMEM;
+
+ emc->num_timings = child_count;
+
+ for_each_child_of_node(node, child) {
+ timing = &emc->timings[i++];
+
+ err = load_one_timing_from_dt(emc, timing, child);
+ if (err)
+ return err;
+ }
+
+ sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings,
+ NULL);
+
+ return 0;
+}
+
+static const struct of_device_id tegra_emc_of_match[] = {
+ { .compatible = "nvidia,tegra124-emc" },
+ {}
+};
+
+static struct device_node *
+tegra_emc_find_node_by_ram_code(struct device_node *node, u32 ram_code)
+{
+ struct device_node *np;
+ int err;
+
+ for_each_child_of_node(node, np) {
+ u32 value;
+
+ err = of_property_read_u32(np, "nvidia,ram-code", &value);
+ if (err || (value != ram_code)) {
+ of_node_put(np);
+ continue;
+ }
+
+ return np;
+ }
+
+ return NULL;
+}
+
+/* Debugfs entry */
+
+static int emc_debug_rate_get(void *data, u64 *rate)
+{
+ struct clk *c = data;
+
+ *rate = clk_get_rate(c);
+
+ return 0;
+}
+
+static int emc_debug_rate_set(void *data, u64 rate)
+{
+ struct clk *c = data;
+
+ return clk_set_rate(c, rate);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(emc_debug_rate_fops, emc_debug_rate_get,
+ emc_debug_rate_set, "%lld\n");
+
+static void emc_debugfs_init(struct device *dev)
+{
+ struct dentry *root, *file;
+ struct clk *clk;
+
+ root = debugfs_create_dir("emc", NULL);
+ if (!root) {
+ dev_err(dev, "failed to create debugfs directory\n");
+ return;
+ }
+
+ clk = clk_get_sys("tegra-clk-debug", "emc");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get debug clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+
+ file = debugfs_create_file("rate", S_IRUGO | S_IWUSR, root, clk,
+ &emc_debug_rate_fops);
+ if (!file)
+ dev_err(dev, "failed to create debugfs entry\n");
+}
+
+static int tegra_emc_probe(struct platform_device *pdev)
+{
+ struct platform_device *mc;
+ struct device_node *np;
+ struct tegra_emc *emc;
+ struct resource *res;
+ u32 ram_code;
+ int err;
+
+ emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL);
+ if (!emc)
+ return -ENOMEM;
+
+ emc->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ emc->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(emc->regs))
+ return PTR_ERR(emc->regs);
+
+ np = of_parse_phandle(pdev->dev.of_node, "nvidia,memory-controller", 0);
+ if (!np) {
+ dev_err(&pdev->dev, "could not get memory controller\n");
+ return -ENOENT;
+ }
+
+ mc = of_find_device_by_node(np);
+ if (!mc)
+ return -ENOENT;
+
+ of_node_put(np);
+
+ emc->mc = platform_get_drvdata(mc);
+ if (!emc->mc)
+ return -EPROBE_DEFER;
+
+ ram_code = tegra_read_ram_code();
+
+ np = tegra_emc_find_node_by_ram_code(pdev->dev.of_node, ram_code);
+ if (!np) {
+ dev_err(&pdev->dev,
+ "no memory timings for RAM code %u found in DT\n",
+ ram_code);
+ return -ENOENT;
+ }
+
+ err = tegra_emc_load_timings_from_dt(emc, np);
+
+ of_node_put(np);
+
+ if (err)
+ return err;
+
+ if (emc->num_timings == 0) {
+ dev_err(&pdev->dev,
+ "no memory timings for RAM code %u registered\n",
+ ram_code);
+ return -ENOENT;
+ }
+
+ err = emc_init(emc);
+ if (err) {
+ dev_err(&pdev->dev, "EMC initialization failed: %d\n", err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, emc);
+
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ emc_debugfs_init(&pdev->dev);
+
+ return 0;
+};
+
+static struct platform_driver tegra_emc_driver = {
+ .probe = tegra_emc_probe,
+ .driver = {
+ .name = "tegra-emc",
+ .of_match_table = tegra_emc_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int tegra_emc_init(void)
+{
+ return platform_driver_register(&tegra_emc_driver);
+}
+subsys_initcall(tegra_emc_init);
#include "mc.h"
+#define MC_EMEM_ARB_CFG 0x90
+#define MC_EMEM_ARB_OUTSTANDING_REQ 0x94
+#define MC_EMEM_ARB_TIMING_RCD 0x98
+#define MC_EMEM_ARB_TIMING_RP 0x9c
+#define MC_EMEM_ARB_TIMING_RC 0xa0
+#define MC_EMEM_ARB_TIMING_RAS 0xa4
+#define MC_EMEM_ARB_TIMING_FAW 0xa8
+#define MC_EMEM_ARB_TIMING_RRD 0xac
+#define MC_EMEM_ARB_TIMING_RAP2PRE 0xb0
+#define MC_EMEM_ARB_TIMING_WAP2PRE 0xb4
+#define MC_EMEM_ARB_TIMING_R2R 0xb8
+#define MC_EMEM_ARB_TIMING_W2W 0xbc
+#define MC_EMEM_ARB_TIMING_R2W 0xc0
+#define MC_EMEM_ARB_TIMING_W2R 0xc4
+#define MC_EMEM_ARB_DA_TURNS 0xd0
+#define MC_EMEM_ARB_DA_COVERS 0xd4
+#define MC_EMEM_ARB_MISC0 0xd8
+#define MC_EMEM_ARB_MISC1 0xdc
+#define MC_EMEM_ARB_RING1_THROTTLE 0xe0
+
+static const unsigned long tegra124_mc_emem_regs[] = {
+ MC_EMEM_ARB_CFG,
+ MC_EMEM_ARB_OUTSTANDING_REQ,
+ MC_EMEM_ARB_TIMING_RCD,
+ MC_EMEM_ARB_TIMING_RP,
+ MC_EMEM_ARB_TIMING_RC,
+ MC_EMEM_ARB_TIMING_RAS,
+ MC_EMEM_ARB_TIMING_FAW,
+ MC_EMEM_ARB_TIMING_RRD,
+ MC_EMEM_ARB_TIMING_RAP2PRE,
+ MC_EMEM_ARB_TIMING_WAP2PRE,
+ MC_EMEM_ARB_TIMING_R2R,
+ MC_EMEM_ARB_TIMING_W2W,
+ MC_EMEM_ARB_TIMING_R2W,
+ MC_EMEM_ARB_TIMING_W2R,
+ MC_EMEM_ARB_DA_TURNS,
+ MC_EMEM_ARB_DA_COVERS,
+ MC_EMEM_ARB_MISC0,
+ MC_EMEM_ARB_MISC1,
+ MC_EMEM_ARB_RING1_THROTTLE
+};
+
static const struct tegra_mc_client tegra124_mc_clients[] = {
{
.id = 0x00,
};
static const struct tegra_smmu_swgroup tegra124_swgroups[] = {
- { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
- { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
- { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
- { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
- { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
- { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
- { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
- { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
- { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 },
- { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
- { .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 },
- { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
- { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
- { .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 },
- { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
- { .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 },
- { .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac },
- { .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 },
- { .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 },
- { .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c },
- { .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 },
- { .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 },
- { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
+ { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .name = "msenc", .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
+ { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 },
+ { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .name = "isp2", .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 },
+ { .name = "xusb_host", .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+ { .name = "xusb_dev", .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
+ { .name = "isp2b", .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 },
+ { .name = "tsec", .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
+ { .name = "a9avp", .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 },
+ { .name = "gpu", .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac },
+ { .name = "sdmmc1a", .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 },
+ { .name = "sdmmc2a", .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 },
+ { .name = "sdmmc3a", .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c },
+ { .name = "sdmmc4a", .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 },
+ { .name = "vic", .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 },
+ { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
};
#ifdef CONFIG_ARCH_TEGRA_124_SOC
.num_address_bits = 34,
.atom_size = 32,
.smmu = &tegra124_smmu_soc,
+ .emem_regs = tegra124_mc_emem_regs,
+ .num_emem_regs = ARRAY_SIZE(tegra124_mc_emem_regs),
};
#endif /* CONFIG_ARCH_TEGRA_124_SOC */
+
+#ifdef CONFIG_ARCH_TEGRA_132_SOC
+static void tegra132_flush_dcache(struct page *page, unsigned long offset,
+ size_t size)
+{
+ void *virt = page_address(page) + offset;
+
+ __flush_dcache_area(virt, size);
+}
+
+static const struct tegra_smmu_ops tegra132_smmu_ops = {
+ .flush_dcache = tegra132_flush_dcache,
+};
+
+static const struct tegra_smmu_soc tegra132_smmu_soc = {
+ .clients = tegra124_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra124_mc_clients),
+ .swgroups = tegra124_swgroups,
+ .num_swgroups = ARRAY_SIZE(tegra124_swgroups),
+ .supports_round_robin_arbitration = true,
+ .supports_request_limit = true,
+ .num_asids = 128,
+ .ops = &tegra132_smmu_ops,
+};
+
+const struct tegra_mc_soc tegra132_mc_soc = {
+ .clients = tegra124_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra124_mc_clients),
+ .num_address_bits = 34,
+ .atom_size = 32,
+ .smmu = &tegra132_smmu_soc,
+};
+#endif /* CONFIG_ARCH_TEGRA_132_SOC */
};
static const struct tegra_smmu_swgroup tegra30_swgroups[] = {
- { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
- { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
- { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
- { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
- { .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 },
- { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
- { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
- { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
- { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
- { .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c },
- { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
- { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
- { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
- { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 },
- { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
- { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
+ { .name = "dc", .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .name = "dcb", .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .name = "epp", .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
+ { .name = "g2", .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
+ { .name = "mpe", .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 },
+ { .name = "vi", .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .name = "afi", .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
+ { .name = "avpc", .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .name = "nv", .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
+ { .name = "nv2", .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c },
+ { .name = "hda", .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .name = "hc", .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .name = "ppcs", .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .name = "sata", .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 },
+ { .name = "vde", .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .name = "isp", .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
};
static void tegra30_flush_dcache(struct page *page, unsigned long offset,
if (napi_schedule_prep(napi)) {
/* Disable Tx and Rx interrupts */
if (pdata->per_channel_irq)
- disable_irq(channel->dma_irq);
+ disable_irq_nosync(channel->dma_irq);
else
xgbe_disable_rx_tx_ints(pdata);
ssb_bus_may_powerdown(sdev->bus);
err_out_free_dev:
+ netif_napi_del(&bp->napi);
free_netdev(dev);
out:
b44_unregister_phy_one(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
+ netif_napi_del(&bp->napi);
free_netdev(dev);
ssb_pcihost_set_power_state(sdev, PCI_D3hot);
ssb_set_drvdata(sdev, NULL);
phy_name = "external RGMII (no delay)";
else
phy_name = "external RGMII (TX delay)";
- reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
- reg |= RGMII_MODE_EN | id_mode_dis;
- bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
bcmgenet_sys_writel(priv,
PORT_MODE_EXT_GPHY, SYS_PORT_CTRL);
break;
return -EINVAL;
}
+ /* This is an external PHY (xMII), so we need to enable the RGMII
+ * block for the interface to work
+ */
+ if (priv->ext_phy) {
+ reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+ reg |= RGMII_MODE_EN | id_mode_dis;
+ bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+ }
+
if (init)
dev_info(kdev, "configuring instance for %s\n", phy_name);
{
struct enic *enic = netdev_priv(netdev);
struct vnic_devcmd_fw_info *fw_info;
+ int err;
- enic_dev_fw_info(enic, &fw_info);
+ err = enic_dev_fw_info(enic, &fw_info);
+ /* return only when pci_zalloc_consistent fails in vnic_dev_fw_info
+ * For other failures, like devcmd failure, we return previously
+ * recorded info.
+ */
+ if (err == -ENOMEM)
+ return;
strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
struct enic *enic = netdev_priv(netdev);
struct vnic_stats *vstats;
unsigned int i;
-
- enic_dev_stats_dump(enic, &vstats);
+ int err;
+
+ err = enic_dev_stats_dump(enic, &vstats);
+ /* return only when pci_zalloc_consistent fails in vnic_dev_stats_dump
+ * For other failures, like devcmd failure, we return previously
+ * recorded stats.
+ */
+ if (err == -ENOMEM)
+ return;
for (i = 0; i < enic_n_tx_stats; i++)
*(data++) = ((u64 *)&vstats->tx)[enic_tx_stats[i].index];
{
struct enic *enic = netdev_priv(netdev);
struct vnic_stats *stats;
+ int err;
- enic_dev_stats_dump(enic, &stats);
+ err = enic_dev_stats_dump(enic, &stats);
+ /* return only when pci_zalloc_consistent fails in vnic_dev_stats_dump
+ * For other failures, like devcmd failure, we return previously
+ * recorded stats.
+ */
+ if (err == -ENOMEM)
+ return net_stats;
net_stats->tx_packets = stats->tx.tx_frames_ok;
net_stats->tx_bytes = stats->tx.tx_bytes_ok;
*/
enic_calc_int_moderation(enic, &enic->rq[rq]);
+ enic_poll_unlock_napi(&enic->rq[rq]);
if (work_done < work_to_do) {
/* Some work done, but not enough to stay in polling,
enic_set_int_moderation(enic, &enic->rq[rq]);
vnic_intr_unmask(&enic->intr[intr]);
}
- enic_poll_unlock_napi(&enic->rq[rq]);
return work_done;
}
struct vnic_rq_buf *buf;
u32 fetch_index;
unsigned int count = rq->ring.desc_count;
+ int i;
buf = rq->to_clean;
- while (vnic_rq_desc_used(rq) > 0) {
-
+ for (i = 0; i < rq->ring.desc_count; i++) {
(*buf_clean)(rq, buf);
-
- buf = rq->to_clean = buf->next;
- rq->ring.desc_avail++;
+ buf = buf->next;
}
+ rq->ring.desc_avail = rq->ring.desc_count - 1;
/* Use current fetch_index as the ring starting point */
fetch_index = ioread32(&rq->ctrl->fetch_index);
total_size = buf_len;
get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60*1024;
- get_fat_cmd.va = pci_alloc_consistent(adapter->pdev,
- get_fat_cmd.size,
- &get_fat_cmd.dma);
+ get_fat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ get_fat_cmd.size,
+ &get_fat_cmd.dma, GFP_ATOMIC);
if (!get_fat_cmd.va) {
dev_err(&adapter->pdev->dev,
"Memory allocation failure while reading FAT data\n");
log_offset += buf_size;
}
err:
- pci_free_consistent(adapter->pdev, get_fat_cmd.size,
- get_fat_cmd.va, get_fat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, get_fat_cmd.size,
+ get_fat_cmd.va, get_fat_cmd.dma);
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
return -EINVAL;
cmd.size = sizeof(struct be_cmd_resp_port_type);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failed\n");
return -ENOMEM;
}
- memset(cmd.va, 0, cmd.size);
spin_lock_bh(&adapter->mcc_lock);
}
err:
spin_unlock_bh(&adapter->mcc_lock);
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
return status;
}
goto err;
}
cmd.size = sizeof(struct be_cmd_req_get_phy_info);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
status = -ENOMEM;
BE_SUPPORTED_SPEED_1GBPS;
}
}
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
err:
spin_unlock_bh(&adapter->mcc_lock);
return status;
memset(&attribs_cmd, 0, sizeof(struct be_dma_mem));
attribs_cmd.size = sizeof(struct be_cmd_resp_cntl_attribs);
- attribs_cmd.va = pci_alloc_consistent(adapter->pdev, attribs_cmd.size,
- &attribs_cmd.dma);
+ attribs_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ attribs_cmd.size,
+ &attribs_cmd.dma, GFP_ATOMIC);
if (!attribs_cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
status = -ENOMEM;
err:
mutex_unlock(&adapter->mbox_lock);
if (attribs_cmd.va)
- pci_free_consistent(adapter->pdev, attribs_cmd.size,
- attribs_cmd.va, attribs_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, attribs_cmd.size,
+ attribs_cmd.va, attribs_cmd.dma);
return status;
}
memset(&get_mac_list_cmd, 0, sizeof(struct be_dma_mem));
get_mac_list_cmd.size = sizeof(struct be_cmd_resp_get_mac_list);
- get_mac_list_cmd.va = pci_alloc_consistent(adapter->pdev,
- get_mac_list_cmd.size,
- &get_mac_list_cmd.dma);
+ get_mac_list_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ get_mac_list_cmd.size,
+ &get_mac_list_cmd.dma,
+ GFP_ATOMIC);
if (!get_mac_list_cmd.va) {
dev_err(&adapter->pdev->dev,
out:
spin_unlock_bh(&adapter->mcc_lock);
- pci_free_consistent(adapter->pdev, get_mac_list_cmd.size,
- get_mac_list_cmd.va, get_mac_list_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, get_mac_list_cmd.size,
+ get_mac_list_cmd.va, get_mac_list_cmd.dma);
return status;
}
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_req_set_mac_list);
- cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size,
- &cmd.dma, GFP_KERNEL);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_KERNEL);
if (!cmd.va)
return -ENOMEM;
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_acpi_wol_magic_config_v1);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
status = -ENOMEM;
err:
mutex_unlock(&adapter->mbox_lock);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
memset(&extfat_cmd, 0, sizeof(struct be_dma_mem));
extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps);
- extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size,
- &extfat_cmd.dma);
+ extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ extfat_cmd.size, &extfat_cmd.dma,
+ GFP_ATOMIC);
if (!extfat_cmd.va)
return -ENOMEM;
status = be_cmd_set_ext_fat_capabilites(adapter, &extfat_cmd, cfgs);
err:
- pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va,
- extfat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, extfat_cmd.size, extfat_cmd.va,
+ extfat_cmd.dma);
return status;
}
memset(&extfat_cmd, 0, sizeof(struct be_dma_mem));
extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps);
- extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size,
- &extfat_cmd.dma);
+ extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ extfat_cmd.size, &extfat_cmd.dma,
+ GFP_ATOMIC);
if (!extfat_cmd.va) {
dev_err(&adapter->pdev->dev, "%s: Memory allocation failure\n",
level = cfgs->module[0].trace_lvl[j].dbg_lvl;
}
}
- pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va,
- extfat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, extfat_cmd.size, extfat_cmd.va,
+ extfat_cmd.dma);
err:
return level;
}
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_get_func_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
status = -ENOMEM;
err:
mutex_unlock(&adapter->mbox_lock);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_get_profile_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va)
return -ENOMEM;
res->vf_if_cap_flags = vf_res->cap_flags;
err:
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_req_set_profile_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va)
return -ENOMEM;
status = be_cmd_notify_wait(adapter, &wrb);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
int status = 0;
read_cmd.size = LANCER_READ_FILE_CHUNK;
- read_cmd.va = pci_alloc_consistent(adapter->pdev, read_cmd.size,
- &read_cmd.dma);
+ read_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, read_cmd.size,
+ &read_cmd.dma, GFP_ATOMIC);
if (!read_cmd.va) {
dev_err(&adapter->pdev->dev,
break;
}
}
- pci_free_consistent(adapter->pdev, read_cmd.size, read_cmd.va,
- read_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, read_cmd.size, read_cmd.va,
+ read_cmd.dma);
return status;
}
};
ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test);
- ddrdma_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, ddrdma_cmd.size,
- &ddrdma_cmd.dma, GFP_KERNEL);
+ ddrdma_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ ddrdma_cmd.size, &ddrdma_cmd.dma,
+ GFP_KERNEL);
if (!ddrdma_cmd.va)
return -ENOMEM;
memset(&eeprom_cmd, 0, sizeof(struct be_dma_mem));
eeprom_cmd.size = sizeof(struct be_cmd_req_seeprom_read);
- eeprom_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, eeprom_cmd.size,
- &eeprom_cmd.dma, GFP_KERNEL);
+ eeprom_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ eeprom_cmd.size, &eeprom_cmd.dma,
+ GFP_KERNEL);
if (!eeprom_cmd.va)
return -ENOMEM;
flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
+ LANCER_FW_DOWNLOAD_CHUNK;
- flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size,
- &flash_cmd.dma, GFP_KERNEL);
+ flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size,
+ &flash_cmd.dma, GFP_KERNEL);
if (!flash_cmd.va)
return -ENOMEM;
}
flash_cmd.size = sizeof(struct be_cmd_write_flashrom);
- flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size, &flash_cmd.dma,
- GFP_KERNEL);
+ flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size, &flash_cmd.dma,
+ GFP_KERNEL);
if (!flash_cmd.va)
return -ENOMEM;
int status = 0;
mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
- mbox_mem_alloc->va = dma_alloc_coherent(dev, mbox_mem_alloc->size,
- &mbox_mem_alloc->dma,
- GFP_KERNEL);
+ mbox_mem_alloc->va = dma_zalloc_coherent(dev, mbox_mem_alloc->size,
+ &mbox_mem_alloc->dma,
+ GFP_KERNEL);
if (!mbox_mem_alloc->va)
return -ENOMEM;
mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
- memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
rx_filter->size = sizeof(struct be_cmd_req_rx_filter);
rx_filter->va = dma_zalloc_coherent(dev, rx_filter->size,
#endif
#define I40E_FLAG_PORT_ID_VALID (u64)(1 << 28)
#define I40E_FLAG_DCB_CAPABLE (u64)(1 << 29)
+#define I40E_FLAG_VEB_MODE_ENABLED BIT_ULL(40)
/* tracks features that get auto disabled by errors */
u64 auto_disable_flags;
goto command_write_done;
}
+ /* By default we are in VEPA mode, if this is the first VF/VMDq
+ * VSI to be added switch to VEB mode.
+ */
+ if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset_safe(pf,
+ BIT_ULL(__I40E_PF_RESET_REQUESTED));
+ }
+
vsi = i40e_vsi_setup(pf, I40E_VSI_VMDQ2, vsi_seid, 0);
if (vsi)
dev_info(&pf->pdev->dev, "added VSI %d to relay %d\n",
if (ret)
goto end_reconstitute;
+ if (pf->flags & I40E_FLAG_VEB_MODE_ENABLED)
+ veb->bridge_mode = BRIDGE_MODE_VEB;
+ else
+ veb->bridge_mode = BRIDGE_MODE_VEPA;
i40e_config_bridge_mode(veb);
/* create the remaining VSIs attached to this VEB */
} else if (mode != veb->bridge_mode) {
/* Existing HW bridge but different mode needs reset */
veb->bridge_mode = mode;
- i40e_do_reset(pf, (1 << __I40E_PF_RESET_REQUESTED));
+ /* TODO: If no VFs or VMDq VSIs, disallow VEB mode */
+ if (mode == BRIDGE_MODE_VEB)
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ else
+ pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED));
break;
}
}
ctxt.uplink_seid = vsi->uplink_seid;
ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
ctxt.flags = I40E_AQ_VSI_TYPE_PF;
- if (i40e_is_vsi_uplink_mode_veb(vsi)) {
+ if ((pf->flags & I40E_FLAG_VEB_MODE_ENABLED) &&
+ (i40e_is_vsi_uplink_mode_veb(vsi))) {
ctxt.info.valid_sections |=
- cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
+ cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID);
ctxt.info.switch_id =
- cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
+ cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB);
}
i40e_vsi_setup_queue_map(vsi, &ctxt, enabled_tc, true);
break;
__func__);
return NULL;
}
+ /* We come up by default in VEPA mode if SRIOV is not
+ * already enabled, in which case we can't force VEPA
+ * mode.
+ */
+ if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+ veb->bridge_mode = BRIDGE_MODE_VEPA;
+ pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
+ }
i40e_config_bridge_mode(veb);
}
for (i = 0; i < I40E_MAX_VEB && !veb; i++) {
goto err_switch_setup;
}
+#ifdef CONFIG_PCI_IOV
+ /* prep for VF support */
+ if ((pf->flags & I40E_FLAG_SRIOV_ENABLED) &&
+ (pf->flags & I40E_FLAG_MSIX_ENABLED) &&
+ !test_bit(__I40E_BAD_EEPROM, &pf->state)) {
+ if (pci_num_vf(pdev))
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ }
+#endif
err = i40e_setup_pf_switch(pf, false);
if (err) {
dev_info(&pdev->dev, "setup_pf_switch failed: %d\n", err);
* i40e_chk_linearize - Check if there are more than 8 fragments per packet
* @skb: send buffer
* @tx_flags: collected send information
- * @hdr_len: size of the packet header
*
* Note: Our HW can't scatter-gather more than 8 fragments to build
* a packet on the wire and so we need to figure out the cases where we
* need to linearize the skb.
**/
-static bool i40e_chk_linearize(struct sk_buff *skb, u32 tx_flags,
- const u8 hdr_len)
+static bool i40e_chk_linearize(struct sk_buff *skb, u32 tx_flags)
{
struct skb_frag_struct *frag;
bool linearize = false;
gso_segs = skb_shinfo(skb)->gso_segs;
if (tx_flags & (I40E_TX_FLAGS_TSO | I40E_TX_FLAGS_FSO)) {
- u16 j = 1;
+ u16 j = 0;
if (num_frags < (I40E_MAX_BUFFER_TXD))
goto linearize_chk_done;
goto linearize_chk_done;
}
frag = &skb_shinfo(skb)->frags[0];
- size = hdr_len;
/* we might still have more fragments per segment */
do {
size += skb_frag_size(frag);
frag++; j++;
+ if ((size >= skb_shinfo(skb)->gso_size) &&
+ (j < I40E_MAX_BUFFER_TXD)) {
+ size = (size % skb_shinfo(skb)->gso_size);
+ j = (size) ? 1 : 0;
+ }
if (j == I40E_MAX_BUFFER_TXD) {
- if (size < skb_shinfo(skb)->gso_size) {
- linearize = true;
- break;
- }
- j = 1;
- size -= skb_shinfo(skb)->gso_size;
- if (size)
- j++;
- size += hdr_len;
+ linearize = true;
+ break;
}
num_frags--;
} while (num_frags);
if (tsyn)
tx_flags |= I40E_TX_FLAGS_TSYN;
- if (i40e_chk_linearize(skb, tx_flags, hdr_len))
+ if (i40e_chk_linearize(skb, tx_flags))
if (skb_linearize(skb))
goto out_drop;
{
struct i40e_pf *pf = pci_get_drvdata(pdev);
- if (num_vfs)
+ if (num_vfs) {
+ if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset_safe(pf,
+ BIT_ULL(__I40E_PF_RESET_REQUESTED));
+ }
return i40e_pci_sriov_enable(pdev, num_vfs);
+ }
if (!pci_vfs_assigned(pf->pdev)) {
i40e_free_vfs(pf);
+ pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
+ i40e_do_reset_safe(pf, BIT_ULL(__I40E_PF_RESET_REQUESTED));
} else {
dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs.\n");
return -EINVAL;
* i40e_chk_linearize - Check if there are more than 8 fragments per packet
* @skb: send buffer
* @tx_flags: collected send information
- * @hdr_len: size of the packet header
*
* Note: Our HW can't scatter-gather more than 8 fragments to build
* a packet on the wire and so we need to figure out the cases where we
* need to linearize the skb.
**/
-static bool i40e_chk_linearize(struct sk_buff *skb, u32 tx_flags,
- const u8 hdr_len)
+static bool i40e_chk_linearize(struct sk_buff *skb, u32 tx_flags)
{
struct skb_frag_struct *frag;
bool linearize = false;
gso_segs = skb_shinfo(skb)->gso_segs;
if (tx_flags & (I40E_TX_FLAGS_TSO | I40E_TX_FLAGS_FSO)) {
- u16 j = 1;
+ u16 j = 0;
if (num_frags < (I40E_MAX_BUFFER_TXD))
goto linearize_chk_done;
goto linearize_chk_done;
}
frag = &skb_shinfo(skb)->frags[0];
- size = hdr_len;
/* we might still have more fragments per segment */
do {
size += skb_frag_size(frag);
frag++; j++;
+ if ((size >= skb_shinfo(skb)->gso_size) &&
+ (j < I40E_MAX_BUFFER_TXD)) {
+ size = (size % skb_shinfo(skb)->gso_size);
+ j = (size) ? 1 : 0;
+ }
if (j == I40E_MAX_BUFFER_TXD) {
- if (size < skb_shinfo(skb)->gso_size) {
- linearize = true;
- break;
- }
- j = 1;
- size -= skb_shinfo(skb)->gso_size;
- if (size)
- j++;
- size += hdr_len;
+ linearize = true;
+ break;
}
num_frags--;
} while (num_frags);
else if (tso)
tx_flags |= I40E_TX_FLAGS_TSO;
- if (i40e_chk_linearize(skb, tx_flags, hdr_len))
+ if (i40e_chk_linearize(skb, tx_flags))
if (skb_linearize(skb))
goto out_drop;
igb->perout[i].start.tv_nsec = rq->perout.start.nsec;
igb->perout[i].period.tv_sec = ts.tv_sec;
igb->perout[i].period.tv_nsec = ts.tv_nsec;
- wr32(trgttiml, rq->perout.start.sec);
- wr32(trgttimh, rq->perout.start.nsec);
+ wr32(trgttimh, rq->perout.start.sec);
+ wr32(trgttiml, rq->perout.start.nsec);
tsauxc |= tsauxc_mask;
tsim |= tsim_mask;
} else {
u32 ppd;
ndev->hw_type = BWD_HW;
+ ndev->limits.max_mw = BWD_MAX_MW;
rc = pci_read_config_dword(ndev->pdev, NTB_PPD_OFFSET, &ppd);
if (rc)
dev_warn(&pdev->dev, "Cannot remap BAR %d\n",
MW_TO_BAR(i));
rc = -EIO;
- goto err3;
+ goto err4;
}
}
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
+ { .compatible = "simple-mfd", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */
tristate "AT91 CompactFlash Controller"
depends on PCI
depends on PCMCIA && ARCH_AT91
- depends on !ARCH_MULTIPLATFORM
help
Say Y here to support the CompactFlash controller on AT91 chips.
Or choose M to compile the driver as a module named "at91_cf".
#include <linux/platform_data/atmel.h>
#include <linux/io.h>
#include <linux/sizes.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-mc.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
+#include <linux/regmap.h>
#include <pcmcia/ss.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-
/*
* A0..A10 work in each range; A23 indicates I/O space; A25 is CFRNW;
* some other bit in {A24,A22..A11} is nREG to flag memory access
#define CF_IO_PHYS (1 << 23)
#define CF_MEM_PHYS (0x017ff800)
+struct regmap *mc;
+
/*--------------------------------------------------------------------------*/
struct at91_cf_socket {
/*
* Use 16 bit accesses unless/until we need 8-bit i/o space.
- */
- csr = at91_ramc_read(0, AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW;
-
- /*
+ *
* NOTE: this CF controller ignores IOIS16, so we can't really do
* MAP_AUTOSZ. The 16bit mode allows single byte access on either
* D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many
* CF 3.0 spec table 35 also giving the D8-D15 option.
*/
if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) {
- csr |= AT91_SMC_DBW_8;
+ csr = AT91_MC_SMC_DBW_8;
dev_dbg(&cf->pdev->dev, "8bit i/o bus\n");
} else {
- csr |= AT91_SMC_DBW_16;
+ csr = AT91_MC_SMC_DBW_16;
dev_dbg(&cf->pdev->dev, "16bit i/o bus\n");
}
- at91_ramc_write(0, AT91_SMC_CSR(cf->board->chipselect), csr);
+ regmap_update_bits(mc, AT91_MC_SMC_CSR(cf->board->chipselect),
+ AT91_MC_SMC_DBW, csr);
io->start = cf->socket.io_offset;
io->stop = io->start + SZ_2K - 1;
pdev->dev.platform_data = board;
+ mc = syscon_regmap_lookup_by_compatible("atmel,at91rm9200-sdramc");
+ if (IS_ERR(mc))
+ return PTR_ERR(mc);
+
return 0;
}
#else
static const struct of_device_id berlin2_pinctrl_match[] = {
{
- .compatible = "marvell,berlin2-chip-ctrl",
+ .compatible = "marvell,berlin2-soc-pinctrl",
.data = &berlin2_soc_pinctrl_data
},
{
- .compatible = "marvell,berlin2-system-ctrl",
+ .compatible = "marvell,berlin2-system-pinctrl",
.data = &berlin2_sysmgr_pinctrl_data
},
{}
{
const struct of_device_id *match =
of_match_device(berlin2_pinctrl_match, &pdev->dev);
- struct regmap_config *rmconfig;
- struct regmap *regmap;
- struct resource *res;
- void __iomem *base;
-
- rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
- if (!rmconfig)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- rmconfig->reg_bits = 32,
- rmconfig->val_bits = 32,
- rmconfig->reg_stride = 4,
- rmconfig->max_register = resource_size(res);
-
- regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}
static const struct of_device_id berlin2cd_pinctrl_match[] = {
{
- .compatible = "marvell,berlin2cd-chip-ctrl",
+ .compatible = "marvell,berlin2cd-soc-pinctrl",
.data = &berlin2cd_soc_pinctrl_data
},
{
- .compatible = "marvell,berlin2cd-system-ctrl",
+ .compatible = "marvell,berlin2cd-system-pinctrl",
.data = &berlin2cd_sysmgr_pinctrl_data
},
{}
{
const struct of_device_id *match =
of_match_device(berlin2cd_pinctrl_match, &pdev->dev);
- struct regmap_config *rmconfig;
- struct regmap *regmap;
- struct resource *res;
- void __iomem *base;
-
- rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
- if (!rmconfig)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- rmconfig->reg_bits = 32,
- rmconfig->val_bits = 32,
- rmconfig->reg_stride = 4,
- rmconfig->max_register = resource_size(res);
-
- regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}
static const struct of_device_id berlin2q_pinctrl_match[] = {
{
- .compatible = "marvell,berlin2q-chip-ctrl",
+ .compatible = "marvell,berlin2q-soc-pinctrl",
.data = &berlin2q_soc_pinctrl_data,
},
{
- .compatible = "marvell,berlin2q-system-ctrl",
+ .compatible = "marvell,berlin2q-system-pinctrl",
.data = &berlin2q_sysmgr_pinctrl_data,
},
{}
{
const struct of_device_id *match =
of_match_device(berlin2q_pinctrl_match, &pdev->dev);
- struct regmap_config *rmconfig;
- struct regmap *regmap;
- struct resource *res;
- void __iomem *base;
-
- rmconfig = devm_kzalloc(&pdev->dev, sizeof(*rmconfig), GFP_KERNEL);
- if (!rmconfig)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- rmconfig->reg_bits = 32,
- rmconfig->val_bits = 32,
- rmconfig->reg_stride = 4,
- rmconfig->max_register = resource_size(res);
-
- regmap = devm_regmap_init_mmio(&pdev->dev, base, rmconfig);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
return berlin_pinctrl_probe(pdev, match->data);
}
*/
#include <linux/io.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
const struct berlin_pinctrl_desc *desc)
{
struct device *dev = &pdev->dev;
+ struct device_node *parent_np = of_get_parent(dev->of_node);
struct berlin_pinctrl *pctrl;
struct regmap *regmap;
int ret;
- regmap = dev_get_regmap(&pdev->dev, NULL);
- if (!regmap)
- return -ENODEV;
+ regmap = syscon_node_to_regmap(parent_np);
+ of_node_put(parent_np);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
if (!pctrl)
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <linux/types.h>
container_of((p), struct berlin_reset_priv, rcdev)
struct berlin_reset_priv {
- void __iomem *base;
- unsigned int size;
+ struct regmap *regmap;
struct reset_controller_dev rcdev;
};
int offset = id >> 8;
int mask = BIT(id & 0x1f);
- writel(mask, priv->base + offset);
+ regmap_write(priv->regmap, offset, mask);
/* let the reset be effective */
udelay(10);
static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
- struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
unsigned offset, bit;
if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
offset = reset_spec->args[0];
bit = reset_spec->args[1];
- if (offset >= priv->size)
- return -EINVAL;
-
if (bit >= BERLIN_MAX_RESETS)
return -EINVAL;
return (offset << 8) | bit;
}
-static int __berlin_reset_init(struct device_node *np)
+static int berlin2_reset_probe(struct platform_device *pdev)
{
+ struct device_node *parent_np = of_get_parent(pdev->dev.of_node);
struct berlin_reset_priv *priv;
- struct resource res;
- resource_size_t size;
- int ret;
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- goto err;
-
- size = resource_size(&res);
- priv->base = ioremap(res.start, size);
- if (!priv->base) {
- ret = -ENOMEM;
- goto err;
- }
- priv->size = size;
+ priv->regmap = syscon_node_to_regmap(parent_np);
+ of_node_put(parent_np);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
priv->rcdev.owner = THIS_MODULE;
priv->rcdev.ops = &berlin_reset_ops;
- priv->rcdev.of_node = np;
+ priv->rcdev.of_node = pdev->dev.of_node;
priv->rcdev.of_reset_n_cells = 2;
priv->rcdev.of_xlate = berlin_reset_xlate;
reset_controller_register(&priv->rcdev);
return 0;
-
-err:
- kfree(priv);
- return ret;
}
-static const struct of_device_id berlin_reset_of_match[] __initconst = {
- { .compatible = "marvell,berlin2-chip-ctrl" },
- { .compatible = "marvell,berlin2cd-chip-ctrl" },
- { .compatible = "marvell,berlin2q-chip-ctrl" },
+static const struct of_device_id berlin_reset_dt_match[] = {
+ { .compatible = "marvell,berlin2-reset" },
{ },
};
+MODULE_DEVICE_TABLE(of, berlin_reset_dt_match);
+
+static struct platform_driver berlin_reset_driver = {
+ .probe = berlin2_reset_probe,
+ .driver = {
+ .name = "berlin2-reset",
+ .of_match_table = berlin_reset_dt_match,
+ },
+};
+module_platform_driver(berlin_reset_driver);
-static int __init berlin_reset_init(void)
-{
- struct device_node *np;
- int ret;
-
- for_each_matching_node(np, berlin_reset_of_match) {
- ret = __berlin_reset_init(np);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-arch_initcall(berlin_reset_init);
+MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>");
+MODULE_DESCRIPTION("Marvell Berlin reset driver");
+MODULE_LICENSE("GPL");
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
+source "drivers/soc/sunxi/Kconfig"
source "drivers/soc/ti/Kconfig"
source "drivers/soc/versatile/Kconfig"
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
obj-$(CONFIG_PLAT_VERSATILE) += versatile/
config MTK_PMIC_WRAP
tristate "MediaTek PMIC Wrapper Support"
depends on ARCH_MEDIATEK
+ depends on RESET_CONTROLLER
select REGMAP
help
Say yes here to add support for MediaTek PMIC Wrapper found
static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata)
{
int ret;
- u32 val;
-
- val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
- if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR)
- pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
if (ret)
static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata)
{
int ret;
- u32 val;
-
- val = pwrap_readl(wrp, PWRAP_WACS2_RDATA);
- if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR)
- pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle);
if (ret)
*rdata = PWRAP_GET_WACS_RDATA(pwrap_readl(wrp, PWRAP_WACS2_RDATA));
+ pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR);
+
return 0;
}
static int pwrap_init_reg_clock(struct pmic_wrapper *wrp)
{
- unsigned long rate_spi;
- int ck_mhz;
-
- rate_spi = clk_get_rate(wrp->clk_spi);
-
- if (rate_spi > 26000000)
- ck_mhz = 26;
- else if (rate_spi > 18000000)
- ck_mhz = 18;
- else
- ck_mhz = 0;
-
- switch (ck_mhz) {
- case 18:
- if (pwrap_is_mt8135(wrp))
- pwrap_writel(wrp, 0xc, PWRAP_CSHEXT);
- pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_WRITE);
- pwrap_writel(wrp, 0xc, PWRAP_CSHEXT_READ);
- pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
- pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
- break;
- case 26:
- if (pwrap_is_mt8135(wrp))
- pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
+ if (pwrap_is_mt8135(wrp)) {
+ pwrap_writel(wrp, 0x4, PWRAP_CSHEXT);
pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START);
pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END);
- break;
- case 0:
- if (pwrap_is_mt8135(wrp))
- pwrap_writel(wrp, 0xf, PWRAP_CSHEXT);
- pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_WRITE);
- pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_READ);
- pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_START);
- pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_END);
- break;
- default:
- return -EINVAL;
+ } else {
+ pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE);
+ pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ);
+ pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
+ pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
}
return 0;
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
+config QCOM_PM
+ bool "Qualcomm Power Management"
+ depends on ARCH_QCOM && !ARM64
+ help
+ QCOM Platform specific power driver to manage cores and L2 low power
+ modes. It interface with various system drivers to put the cores in
+ low power modes.
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_PM) += spm.o
--- /dev/null
+/*
+ * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014,2015, Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/qcom_scm.h>
+
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+
+#define MAX_PMIC_DATA 2
+#define MAX_SEQ_DATA 64
+#define SPM_CTL_INDEX 0x7f
+#define SPM_CTL_INDEX_SHIFT 4
+#define SPM_CTL_EN BIT(0)
+
+enum pm_sleep_mode {
+ PM_SLEEP_MODE_STBY,
+ PM_SLEEP_MODE_RET,
+ PM_SLEEP_MODE_SPC,
+ PM_SLEEP_MODE_PC,
+ PM_SLEEP_MODE_NR,
+};
+
+enum spm_reg {
+ SPM_REG_CFG,
+ SPM_REG_SPM_CTL,
+ SPM_REG_DLY,
+ SPM_REG_PMIC_DLY,
+ SPM_REG_PMIC_DATA_0,
+ SPM_REG_PMIC_DATA_1,
+ SPM_REG_VCTL,
+ SPM_REG_SEQ_ENTRY,
+ SPM_REG_SPM_STS,
+ SPM_REG_PMIC_STS,
+ SPM_REG_NR,
+};
+
+struct spm_reg_data {
+ const u8 *reg_offset;
+ u32 spm_cfg;
+ u32 spm_dly;
+ u32 pmic_dly;
+ u32 pmic_data[MAX_PMIC_DATA];
+ u8 seq[MAX_SEQ_DATA];
+ u8 start_index[PM_SLEEP_MODE_NR];
+};
+
+struct spm_driver_data {
+ void __iomem *reg_base;
+ const struct spm_reg_data *reg_data;
+};
+
+static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
+ [SPM_REG_CFG] = 0x08,
+ [SPM_REG_SPM_CTL] = 0x30,
+ [SPM_REG_DLY] = 0x34,
+ [SPM_REG_SEQ_ENTRY] = 0x80,
+};
+
+/* SPM register data for 8974, 8084 */
+static const struct spm_reg_data spm_reg_8974_8084_cpu = {
+ .reg_offset = spm_reg_offset_v2_1,
+ .spm_cfg = 0x1,
+ .spm_dly = 0x3C102800,
+ .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
+ 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
+ 0x0F },
+ .start_index[PM_SLEEP_MODE_STBY] = 0,
+ .start_index[PM_SLEEP_MODE_SPC] = 3,
+};
+
+static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
+ [SPM_REG_CFG] = 0x08,
+ [SPM_REG_SPM_CTL] = 0x20,
+ [SPM_REG_PMIC_DLY] = 0x24,
+ [SPM_REG_PMIC_DATA_0] = 0x28,
+ [SPM_REG_PMIC_DATA_1] = 0x2C,
+ [SPM_REG_SEQ_ENTRY] = 0x80,
+};
+
+/* SPM register data for 8064 */
+static const struct spm_reg_data spm_reg_8064_cpu = {
+ .reg_offset = spm_reg_offset_v1_1,
+ .spm_cfg = 0x1F,
+ .pmic_dly = 0x02020004,
+ .pmic_data[0] = 0x0084009C,
+ .pmic_data[1] = 0x00A4001C,
+ .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
+ 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
+ .start_index[PM_SLEEP_MODE_STBY] = 0,
+ .start_index[PM_SLEEP_MODE_SPC] = 2,
+};
+
+static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
+
+typedef int (*idle_fn)(int);
+static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
+
+static inline void spm_register_write(struct spm_driver_data *drv,
+ enum spm_reg reg, u32 val)
+{
+ if (drv->reg_data->reg_offset[reg])
+ writel_relaxed(val, drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+}
+
+/* Ensure a guaranteed write, before return */
+static inline void spm_register_write_sync(struct spm_driver_data *drv,
+ enum spm_reg reg, u32 val)
+{
+ u32 ret;
+
+ if (!drv->reg_data->reg_offset[reg])
+ return;
+
+ do {
+ writel_relaxed(val, drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+ ret = readl_relaxed(drv->reg_base +
+ drv->reg_data->reg_offset[reg]);
+ if (ret == val)
+ break;
+ cpu_relax();
+ } while (1);
+}
+
+static inline u32 spm_register_read(struct spm_driver_data *drv,
+ enum spm_reg reg)
+{
+ return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
+}
+
+static void spm_set_low_power_mode(struct spm_driver_data *drv,
+ enum pm_sleep_mode mode)
+{
+ u32 start_index;
+ u32 ctl_val;
+
+ start_index = drv->reg_data->start_index[mode];
+
+ ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
+ ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
+ ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
+ ctl_val |= SPM_CTL_EN;
+ spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
+}
+
+static int qcom_pm_collapse(unsigned long int unused)
+{
+ qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON);
+
+ /*
+ * Returns here only if there was a pending interrupt and we did not
+ * power down as a result.
+ */
+ return -1;
+}
+
+static int qcom_cpu_spc(int cpu)
+{
+ int ret;
+ struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
+
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
+ ret = cpu_suspend(0, qcom_pm_collapse);
+ /*
+ * ARM common code executes WFI without calling into our driver and
+ * if the SPM mode is not reset, then we may accidently power down the
+ * cpu when we intended only to gate the cpu clock.
+ * Ensure the state is set to standby before returning.
+ */
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+
+ return ret;
+}
+
+static int qcom_idle_enter(int cpu, unsigned long index)
+{
+ return per_cpu(qcom_idle_ops, cpu)[index](cpu);
+}
+
+static const struct of_device_id qcom_idle_state_match[] __initconst = {
+ { .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc },
+ { },
+};
+
+static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
+{
+ const struct of_device_id *match_id;
+ struct device_node *state_node;
+ int i;
+ int state_count = 1;
+ idle_fn idle_fns[CPUIDLE_STATE_MAX];
+ idle_fn *fns;
+ cpumask_t mask;
+ bool use_scm_power_down = false;
+
+ for (i = 0; ; i++) {
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ if (!state_node)
+ break;
+
+ if (!of_device_is_available(state_node))
+ continue;
+
+ if (i == CPUIDLE_STATE_MAX) {
+ pr_warn("%s: cpuidle states reached max possible\n",
+ __func__);
+ break;
+ }
+
+ match_id = of_match_node(qcom_idle_state_match, state_node);
+ if (!match_id)
+ return -ENODEV;
+
+ idle_fns[state_count] = match_id->data;
+
+ /* Check if any of the states allow power down */
+ if (match_id->data == qcom_cpu_spc)
+ use_scm_power_down = true;
+
+ state_count++;
+ }
+
+ if (state_count == 1)
+ goto check_spm;
+
+ fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns),
+ GFP_KERNEL);
+ if (!fns)
+ return -ENOMEM;
+
+ for (i = 1; i < state_count; i++)
+ fns[i] = idle_fns[i];
+
+ if (use_scm_power_down) {
+ /* We have atleast one power down mode */
+ cpumask_clear(&mask);
+ cpumask_set_cpu(cpu, &mask);
+ qcom_scm_set_warm_boot_addr(cpu_resume_arm, &mask);
+ }
+
+ per_cpu(qcom_idle_ops, cpu) = fns;
+
+ /*
+ * SPM probe for the cpu should have happened by now, if the
+ * SPM device does not exist, return -ENXIO to indicate that the
+ * cpu does not support idle states.
+ */
+check_spm:
+ return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;
+}
+
+static struct cpuidle_ops qcom_cpuidle_ops __initdata = {
+ .suspend = qcom_idle_enter,
+ .init = qcom_cpuidle_init,
+};
+
+CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops);
+CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops);
+
+static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
+ int *spm_cpu)
+{
+ struct spm_driver_data *drv = NULL;
+ struct device_node *cpu_node, *saw_node;
+ int cpu;
+ bool found;
+
+ for_each_possible_cpu(cpu) {
+ cpu_node = of_cpu_device_node_get(cpu);
+ if (!cpu_node)
+ continue;
+ saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
+ found = (saw_node == pdev->dev.of_node);
+ of_node_put(saw_node);
+ of_node_put(cpu_node);
+ if (found)
+ break;
+ }
+
+ if (found) {
+ drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
+ if (drv)
+ *spm_cpu = cpu;
+ }
+
+ return drv;
+}
+
+static const struct of_device_id spm_match_table[] = {
+ { .compatible = "qcom,msm8974-saw2-v2.1-cpu",
+ .data = &spm_reg_8974_8084_cpu },
+ { .compatible = "qcom,apq8084-saw2-v2.1-cpu",
+ .data = &spm_reg_8974_8084_cpu },
+ { .compatible = "qcom,apq8064-saw2-v1.1-cpu",
+ .data = &spm_reg_8064_cpu },
+ { },
+};
+
+static int spm_dev_probe(struct platform_device *pdev)
+{
+ struct spm_driver_data *drv;
+ struct resource *res;
+ const struct of_device_id *match_id;
+ void __iomem *addr;
+ int cpu;
+
+ drv = spm_get_drv(pdev, &cpu);
+ if (!drv)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drv->reg_base))
+ return PTR_ERR(drv->reg_base);
+
+ match_id = of_match_node(spm_match_table, pdev->dev.of_node);
+ if (!match_id)
+ return -ENODEV;
+
+ drv->reg_data = match_id->data;
+
+ /* Write the SPM sequences first.. */
+ addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
+ __iowrite32_copy(addr, drv->reg_data->seq,
+ ARRAY_SIZE(drv->reg_data->seq) / 4);
+
+ /*
+ * ..and then the control registers.
+ * On some SoC if the control registers are written first and if the
+ * CPU was held in reset, the reset signal could trigger the SPM state
+ * machine, before the sequences are completely written.
+ */
+ spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
+ spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
+ spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_0,
+ drv->reg_data->pmic_data[0]);
+ spm_register_write(drv, SPM_REG_PMIC_DATA_1,
+ drv->reg_data->pmic_data[1]);
+
+ /* Set up Standby as the default low power mode */
+ spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+
+ per_cpu(cpu_spm_drv, cpu) = drv;
+
+ return 0;
+}
+
+static struct platform_driver spm_driver = {
+ .probe = spm_dev_probe,
+ .driver = {
+ .name = "saw",
+ .of_match_table = spm_match_table,
+ },
+};
+module_platform_driver(spm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SAW power controller driver");
+MODULE_ALIAS("platform:saw");
--- /dev/null
+#
+# Allwinner sunXi SoC drivers
+#
+config SUNXI_SRAM
+ bool
+ default ARCH_SUNXI
+ help
+ Say y here to enable the SRAM controller support. This
+ device is responsible on mapping the SRAM in the sunXi SoCs
+ whether to the CPU/DMA, or to the devices.
--- /dev/null
+obj-$(CONFIG_SUNXI_SRAM) += sunxi_sram.o
--- /dev/null
+/*
+ * Allwinner SoCs SRAM Controller Driver
+ *
+ * Copyright (C) 2015 Maxime Ripard
+ *
+ * Author: Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <linux/soc/sunxi/sunxi_sram.h>
+
+struct sunxi_sram_func {
+ char *func;
+ u8 val;
+};
+
+struct sunxi_sram_data {
+ char *name;
+ u8 reg;
+ u8 offset;
+ u8 width;
+ struct sunxi_sram_func *func;
+ struct list_head list;
+};
+
+struct sunxi_sram_desc {
+ struct sunxi_sram_data data;
+ bool claimed;
+};
+
+#define SUNXI_SRAM_MAP(_val, _func) \
+ { \
+ .func = _func, \
+ .val = _val, \
+ }
+
+#define SUNXI_SRAM_DATA(_name, _reg, _off, _width, ...) \
+ { \
+ .name = _name, \
+ .reg = _reg, \
+ .offset = _off, \
+ .width = _width, \
+ .func = (struct sunxi_sram_func[]){ \
+ __VA_ARGS__, { } }, \
+ }
+
+static struct sunxi_sram_desc sun4i_a10_sram_a3_a4 = {
+ .data = SUNXI_SRAM_DATA("A3-A4", 0x4, 0x4, 2,
+ SUNXI_SRAM_MAP(0, "cpu"),
+ SUNXI_SRAM_MAP(1, "emac")),
+};
+
+static struct sunxi_sram_desc sun4i_a10_sram_d = {
+ .data = SUNXI_SRAM_DATA("D", 0x4, 0x0, 1,
+ SUNXI_SRAM_MAP(0, "cpu"),
+ SUNXI_SRAM_MAP(1, "usb-otg")),
+};
+
+static const struct of_device_id sunxi_sram_dt_ids[] = {
+ {
+ .compatible = "allwinner,sun4i-a10-sram-a3-a4",
+ .data = &sun4i_a10_sram_a3_a4.data,
+ },
+ {
+ .compatible = "allwinner,sun4i-a10-sram-d",
+ .data = &sun4i_a10_sram_d.data,
+ },
+ {}
+};
+
+static struct device *sram_dev;
+static LIST_HEAD(claimed_sram);
+static DEFINE_SPINLOCK(sram_lock);
+static void __iomem *base;
+
+static int sunxi_sram_show(struct seq_file *s, void *data)
+{
+ struct device_node *sram_node, *section_node;
+ const struct sunxi_sram_data *sram_data;
+ const struct of_device_id *match;
+ struct sunxi_sram_func *func;
+ const __be32 *sram_addr_p, *section_addr_p;
+ u32 val;
+
+ seq_puts(s, "Allwinner sunXi SRAM\n");
+ seq_puts(s, "--------------------\n\n");
+
+ for_each_child_of_node(sram_dev->of_node, sram_node) {
+ sram_addr_p = of_get_address(sram_node, 0, NULL, NULL);
+
+ seq_printf(s, "sram@%08x\n",
+ be32_to_cpu(*sram_addr_p));
+
+ for_each_child_of_node(sram_node, section_node) {
+ match = of_match_node(sunxi_sram_dt_ids, section_node);
+ if (!match)
+ continue;
+ sram_data = match->data;
+
+ section_addr_p = of_get_address(section_node, 0,
+ NULL, NULL);
+
+ seq_printf(s, "\tsection@%04x\t(%s)\n",
+ be32_to_cpu(*section_addr_p),
+ sram_data->name);
+
+ val = readl(base + sram_data->reg);
+ val >>= sram_data->offset;
+ val &= sram_data->width;
+
+ for (func = sram_data->func; func->func; func++) {
+ seq_printf(s, "\t\t%s%c\n", func->func,
+ func->val == val ? '*' : ' ');
+ }
+ }
+
+ seq_puts(s, "\n");
+ }
+
+ return 0;
+}
+
+static int sunxi_sram_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, sunxi_sram_show, inode->i_private);
+}
+
+static const struct file_operations sunxi_sram_fops = {
+ .open = sunxi_sram_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static inline struct sunxi_sram_desc *to_sram_desc(const struct sunxi_sram_data *data)
+{
+ return container_of(data, struct sunxi_sram_desc, data);
+}
+
+static const struct sunxi_sram_data *sunxi_sram_of_parse(struct device_node *node,
+ unsigned int *value)
+{
+ const struct of_device_id *match;
+ struct of_phandle_args args;
+ int ret;
+
+ ret = of_parse_phandle_with_fixed_args(node, "allwinner,sram", 1, 0,
+ &args);
+ if (ret)
+ return ERR_PTR(ret);
+
+ if (!of_device_is_available(args.np)) {
+ ret = -EBUSY;
+ goto err;
+ }
+
+ if (value)
+ *value = args.args[0];
+
+ match = of_match_node(sunxi_sram_dt_ids, args.np);
+ if (!match) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ of_node_put(args.np);
+ return match->data;
+
+err:
+ of_node_put(args.np);
+ return ERR_PTR(ret);
+}
+
+int sunxi_sram_claim(struct device *dev)
+{
+ const struct sunxi_sram_data *sram_data;
+ struct sunxi_sram_desc *sram_desc;
+ unsigned int device;
+ u32 val, mask;
+
+ if (IS_ERR(base))
+ return -EPROBE_DEFER;
+
+ if (!dev || !dev->of_node)
+ return -EINVAL;
+
+ sram_data = sunxi_sram_of_parse(dev->of_node, &device);
+ if (IS_ERR(sram_data))
+ return PTR_ERR(sram_data);
+
+ sram_desc = to_sram_desc(sram_data);
+
+ spin_lock(&sram_lock);
+
+ if (sram_desc->claimed) {
+ spin_unlock(&sram_lock);
+ return -EBUSY;
+ }
+
+ mask = GENMASK(sram_data->offset + sram_data->width, sram_data->offset);
+ val = readl(base + sram_data->reg);
+ val &= ~mask;
+ writel(val | ((device << sram_data->offset) & mask),
+ base + sram_data->reg);
+
+ spin_unlock(&sram_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(sunxi_sram_claim);
+
+int sunxi_sram_release(struct device *dev)
+{
+ const struct sunxi_sram_data *sram_data;
+ struct sunxi_sram_desc *sram_desc;
+
+ if (!dev || !dev->of_node)
+ return -EINVAL;
+
+ sram_data = sunxi_sram_of_parse(dev->of_node, NULL);
+ if (IS_ERR(sram_data))
+ return -EINVAL;
+
+ sram_desc = to_sram_desc(sram_data);
+
+ spin_lock(&sram_lock);
+ sram_desc->claimed = false;
+ spin_unlock(&sram_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(sunxi_sram_release);
+
+static int sunxi_sram_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct dentry *d;
+
+ sram_dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+
+ d = debugfs_create_file("sram", S_IRUGO, NULL, NULL,
+ &sunxi_sram_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_sram_dt_match[] = {
+ { .compatible = "allwinner,sun4i-a10-sram-controller" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sunxi_sram_dt_match);
+
+static struct platform_driver sunxi_sram_driver = {
+ .driver = {
+ .name = "sunxi-sram",
+ .of_match_table = sunxi_sram_dt_match,
+ },
+ .probe = sunxi_sram_probe,
+};
+module_platform_driver(sunxi_sram_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner sunXi SRAM Controller Driver");
+MODULE_LICENSE("GPL");
int ret;
u32 val = 0;
struct dma_async_tx_descriptor *dma_desc;
+ unsigned long time_left;
mutex_lock(&apb_dma_lock);
dmaengine_submit(dma_desc);
dma_async_issue_pending(apb_dma_chan);
- ret = wait_for_completion_timeout(&apb_dma_wait, msecs_to_jiffies(50));
+ time_left = wait_for_completion_timeout(&apb_dma_wait,
+ msecs_to_jiffies(50));
- if (WARN(ret == 0, "apb read dma timed out"))
+ if (WARN(time_left == 0, "apb read dma timed out"))
dmaengine_terminate_all(apb_dma_chan);
else
val = *apb_buffer;
#define APBMISC_SIZE 0x64
#define FUSE_SKU_INFO 0x10
+#define PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT 4
+#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG \
+ (0xf << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT)
+#define PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT \
+ (0x3 << PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT)
+
static void __iomem *apbmisc_base;
static void __iomem *strapping_base;
+static bool long_ram_code;
u32 tegra_read_chipid(void)
{
return 0;
}
+u32 tegra_read_ram_code(void)
+{
+ u32 straps = tegra_read_straps();
+
+ if (long_ram_code)
+ straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_LONG;
+ else
+ straps &= PMC_STRAPPING_OPT_A_RAM_CODE_MASK_SHORT;
+
+ return straps >> PMC_STRAPPING_OPT_A_RAM_CODE_SHIFT;
+}
+
static const struct of_device_id apbmisc_match[] __initconst = {
{ .compatible = "nvidia,tegra20-apbmisc", },
{},
strapping_base = of_iomap(np, 1);
if (!strapping_base)
pr_err("ioremap tegra strapping_base failed\n");
+
+ long_ram_code = of_property_read_bool(np, "nvidia,long-ram-code");
}
}
#endif /* CONFIG_SMP */
-/**
- * tegra_pmc_restart() - reboot the system
- * @mode: which mode to reboot in
- * @cmd: reboot command
- */
-void tegra_pmc_restart(enum reboot_mode mode, const char *cmd)
+static int tegra_pmc_restart_notify(struct notifier_block *this,
+ unsigned long action, void *data)
{
+ const char *cmd = data;
u32 value;
value = tegra_pmc_readl(PMC_SCRATCH0);
value = tegra_pmc_readl(0);
value |= 0x10;
tegra_pmc_writel(value, 0);
+
+ return NOTIFY_DONE;
}
+static struct notifier_block tegra_pmc_restart_handler = {
+ .notifier_call = tegra_pmc_restart_notify,
+ .priority = 128,
+};
+
static int powergate_show(struct seq_file *s, void *data)
{
unsigned int i;
return err;
}
+ err = register_restart_handler(&tegra_pmc_restart_handler);
+ if (err) {
+ dev_err(&pdev->dev, "unable to register restart handler, %d\n",
+ err);
+ return err;
+ }
+
return 0;
}
u32 crystalfreq;
const struct pmu0_plltab_entry *e = NULL;
- crystalfreq = chipco_read32(cc, SSB_CHIPCO_PMU_CTL) &
- SSB_CHIPCO_PMU_CTL_XTALFREQ >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT;
+ crystalfreq = (chipco_read32(cc, SSB_CHIPCO_PMU_CTL) &
+ SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT;
e = pmu0_plltab_find_entry(crystalfreq);
BUG_ON(!e);
return e->freq * 1000;
switch (bus->chip_id) {
case 0x5354:
- ssb_pmu_get_alp_clock_clk0(cc);
+ return ssb_pmu_get_alp_clock_clk0(cc);
default:
ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
bus->chip_id);
if (cpu == -1)
irq_set_affinity_hint(irq, NULL);
else {
+ cpumask_clear(mask);
cpumask_set_cpu(cpu, mask);
irq_set_affinity_hint(irq, mask);
}
* option) any later version.
*/
+#include <linux/delay.h>
+#include <linux/reboot.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/watchdog.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#define PM_RSTC 0x1c
+#define PM_RSTS 0x20
#define PM_WDOG 0x24
#define PM_PASSWORD 0x5a000000
#define PM_WDOG_TIME_SET 0x000fffff
#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTS_HADWRH_SET 0x00000040
#define PM_RSTC_WRCFG_SET 0x00000030
#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
#define PM_RSTC_RESET 0x00000102
struct bcm2835_wdt {
void __iomem *base;
spinlock_t lock;
+ struct notifier_block restart_handler;
};
static unsigned int heartbeat;
.timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
};
+static int
+bcm2835_restart(struct notifier_block *this, unsigned long mode, void *cmd)
+{
+ struct bcm2835_wdt *wdt = container_of(this, struct bcm2835_wdt,
+ restart_handler);
+ u32 val;
+
+ /* use a timeout of 10 ticks (~150us) */
+ writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG);
+ val = readl_relaxed(wdt->base + PM_RSTC);
+ val &= PM_RSTC_WRCFG_CLR;
+ val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
+ writel_relaxed(val, wdt->base + PM_RSTC);
+
+ /* No sleeping, possibly atomic. */
+ mdelay(1);
+
+ return 0;
+}
+
+/*
+ * We can't really power off, but if we do the normal reset scheme, and
+ * indicate to bootcode.bin not to reboot, then most of the chip will be
+ * powered off.
+ */
+static void bcm2835_power_off(void)
+{
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt");
+ struct platform_device *pdev = of_find_device_by_node(np);
+ struct bcm2835_wdt *wdt = platform_get_drvdata(pdev);
+ u32 val;
+
+ /*
+ * We set the watchdog hard reset bit here to distinguish this reset
+ * from the normal (full) reset. bootcode.bin will not reboot after a
+ * hard reset.
+ */
+ val = readl_relaxed(wdt->base + PM_RSTS);
+ val &= PM_RSTC_WRCFG_CLR;
+ val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
+ writel_relaxed(val, wdt->base + PM_RSTS);
+
+ /* Continue with normal reset mechanism */
+ bcm2835_restart(&wdt->restart_handler, REBOOT_HARD, NULL);
+}
+
static int bcm2835_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
return err;
}
+ wdt->restart_handler.notifier_call = bcm2835_restart;
+ wdt->restart_handler.priority = 128;
+ register_restart_handler(&wdt->restart_handler);
+ if (pm_power_off == NULL)
+ pm_power_off = bcm2835_power_off;
+
dev_info(dev, "Broadcom BCM2835 watchdog timer");
return 0;
}
{
struct bcm2835_wdt *wdt = platform_get_drvdata(pdev);
+ unregister_restart_handler(&wdt->restart_handler);
+ if (pm_power_off == bcm2835_power_off)
+ pm_power_off = NULL;
watchdog_unregister_device(&bcm2835_wdt_wdd);
iounmap(wdt->base);
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX7D_H
+#define __DT_BINDINGS_CLOCK_IMX7D_H
+
+#define IMX7D_OSC_24M_CLK 0
+#define IMX7D_PLL_ARM_MAIN 1
+#define IMX7D_PLL_ARM_MAIN_CLK 2
+#define IMX7D_PLL_ARM_MAIN_SRC 3
+#define IMX7D_PLL_ARM_MAIN_BYPASS 4
+#define IMX7D_PLL_SYS_MAIN 5
+#define IMX7D_PLL_SYS_MAIN_CLK 6
+#define IMX7D_PLL_SYS_MAIN_SRC 7
+#define IMX7D_PLL_SYS_MAIN_BYPASS 8
+#define IMX7D_PLL_SYS_MAIN_480M 9
+#define IMX7D_PLL_SYS_MAIN_240M 10
+#define IMX7D_PLL_SYS_MAIN_120M 11
+#define IMX7D_PLL_SYS_MAIN_480M_CLK 12
+#define IMX7D_PLL_SYS_MAIN_240M_CLK 13
+#define IMX7D_PLL_SYS_MAIN_120M_CLK 14
+#define IMX7D_PLL_SYS_PFD0_392M_CLK 15
+#define IMX7D_PLL_SYS_PFD0_196M 16
+#define IMX7D_PLL_SYS_PFD0_196M_CLK 17
+#define IMX7D_PLL_SYS_PFD1_332M_CLK 18
+#define IMX7D_PLL_SYS_PFD1_166M 19
+#define IMX7D_PLL_SYS_PFD1_166M_CLK 20
+#define IMX7D_PLL_SYS_PFD2_270M_CLK 21
+#define IMX7D_PLL_SYS_PFD2_135M 22
+#define IMX7D_PLL_SYS_PFD2_135M_CLK 23
+#define IMX7D_PLL_SYS_PFD3_CLK 24
+#define IMX7D_PLL_SYS_PFD4_CLK 25
+#define IMX7D_PLL_SYS_PFD5_CLK 26
+#define IMX7D_PLL_SYS_PFD6_CLK 27
+#define IMX7D_PLL_SYS_PFD7_CLK 28
+#define IMX7D_PLL_ENET_MAIN 29
+#define IMX7D_PLL_ENET_MAIN_CLK 30
+#define IMX7D_PLL_ENET_MAIN_SRC 31
+#define IMX7D_PLL_ENET_MAIN_BYPASS 32
+#define IMX7D_PLL_ENET_MAIN_500M 33
+#define IMX7D_PLL_ENET_MAIN_250M 34
+#define IMX7D_PLL_ENET_MAIN_125M 35
+#define IMX7D_PLL_ENET_MAIN_100M 36
+#define IMX7D_PLL_ENET_MAIN_50M 37
+#define IMX7D_PLL_ENET_MAIN_40M 38
+#define IMX7D_PLL_ENET_MAIN_25M 39
+#define IMX7D_PLL_ENET_MAIN_500M_CLK 40
+#define IMX7D_PLL_ENET_MAIN_250M_CLK 41
+#define IMX7D_PLL_ENET_MAIN_125M_CLK 42
+#define IMX7D_PLL_ENET_MAIN_100M_CLK 43
+#define IMX7D_PLL_ENET_MAIN_50M_CLK 44
+#define IMX7D_PLL_ENET_MAIN_40M_CLK 45
+#define IMX7D_PLL_ENET_MAIN_25M_CLK 46
+#define IMX7D_PLL_DRAM_MAIN 47
+#define IMX7D_PLL_DRAM_MAIN_CLK 48
+#define IMX7D_PLL_DRAM_MAIN_SRC 49
+#define IMX7D_PLL_DRAM_MAIN_BYPASS 50
+#define IMX7D_PLL_DRAM_MAIN_533M 51
+#define IMX7D_PLL_DRAM_MAIN_533M_CLK 52
+#define IMX7D_PLL_AUDIO_MAIN 53
+#define IMX7D_PLL_AUDIO_MAIN_CLK 54
+#define IMX7D_PLL_AUDIO_MAIN_SRC 55
+#define IMX7D_PLL_AUDIO_MAIN_BYPASS 56
+#define IMX7D_PLL_VIDEO_MAIN_CLK 57
+#define IMX7D_PLL_VIDEO_MAIN 58
+#define IMX7D_PLL_VIDEO_MAIN_SRC 59
+#define IMX7D_PLL_VIDEO_MAIN_BYPASS 60
+#define IMX7D_USB_MAIN_480M_CLK 61
+#define IMX7D_ARM_A7_ROOT_CLK 62
+#define IMX7D_ARM_A7_ROOT_SRC 63
+#define IMX7D_ARM_A7_ROOT_CG 64
+#define IMX7D_ARM_A7_ROOT_DIV 65
+#define IMX7D_ARM_M4_ROOT_CLK 66
+#define IMX7D_ARM_M4_ROOT_SRC 67
+#define IMX7D_ARM_M4_ROOT_CG 68
+#define IMX7D_ARM_M4_ROOT_DIV 69
+#define IMX7D_ARM_M0_ROOT_CLK 70
+#define IMX7D_ARM_M0_ROOT_SRC 71
+#define IMX7D_ARM_M0_ROOT_CG 72
+#define IMX7D_ARM_M0_ROOT_DIV 73
+#define IMX7D_MAIN_AXI_ROOT_CLK 74
+#define IMX7D_MAIN_AXI_ROOT_SRC 75
+#define IMX7D_MAIN_AXI_ROOT_CG 76
+#define IMX7D_MAIN_AXI_ROOT_DIV 77
+#define IMX7D_DISP_AXI_ROOT_CLK 78
+#define IMX7D_DISP_AXI_ROOT_SRC 79
+#define IMX7D_DISP_AXI_ROOT_CG 80
+#define IMX7D_DISP_AXI_ROOT_DIV 81
+#define IMX7D_ENET_AXI_ROOT_CLK 82
+#define IMX7D_ENET_AXI_ROOT_SRC 83
+#define IMX7D_ENET_AXI_ROOT_CG 84
+#define IMX7D_ENET_AXI_ROOT_DIV 85
+#define IMX7D_NAND_USDHC_BUS_ROOT_CLK 86
+#define IMX7D_NAND_USDHC_BUS_ROOT_SRC 87
+#define IMX7D_NAND_USDHC_BUS_ROOT_CG 88
+#define IMX7D_NAND_USDHC_BUS_ROOT_DIV 89
+#define IMX7D_AHB_CHANNEL_ROOT_CLK 90
+#define IMX7D_AHB_CHANNEL_ROOT_SRC 91
+#define IMX7D_AHB_CHANNEL_ROOT_CG 92
+#define IMX7D_AHB_CHANNEL_ROOT_DIV 93
+#define IMX7D_DRAM_PHYM_ROOT_CLK 94
+#define IMX7D_DRAM_PHYM_ROOT_SRC 95
+#define IMX7D_DRAM_PHYM_ROOT_CG 96
+#define IMX7D_DRAM_PHYM_ROOT_DIV 97
+#define IMX7D_DRAM_ROOT_CLK 98
+#define IMX7D_DRAM_ROOT_SRC 99
+#define IMX7D_DRAM_ROOT_CG 100
+#define IMX7D_DRAM_ROOT_DIV 101
+#define IMX7D_DRAM_PHYM_ALT_ROOT_CLK 102
+#define IMX7D_DRAM_PHYM_ALT_ROOT_SRC 103
+#define IMX7D_DRAM_PHYM_ALT_ROOT_CG 104
+#define IMX7D_DRAM_PHYM_ALT_ROOT_DIV 105
+#define IMX7D_DRAM_ALT_ROOT_CLK 106
+#define IMX7D_DRAM_ALT_ROOT_SRC 107
+#define IMX7D_DRAM_ALT_ROOT_CG 108
+#define IMX7D_DRAM_ALT_ROOT_DIV 109
+#define IMX7D_USB_HSIC_ROOT_CLK 110
+#define IMX7D_USB_HSIC_ROOT_SRC 111
+#define IMX7D_USB_HSIC_ROOT_CG 112
+#define IMX7D_USB_HSIC_ROOT_DIV 113
+#define IMX7D_PCIE_CTRL_ROOT_CLK 114
+#define IMX7D_PCIE_CTRL_ROOT_SRC 115
+#define IMX7D_PCIE_CTRL_ROOT_CG 116
+#define IMX7D_PCIE_CTRL_ROOT_DIV 117
+#define IMX7D_PCIE_PHY_ROOT_CLK 118
+#define IMX7D_PCIE_PHY_ROOT_SRC 119
+#define IMX7D_PCIE_PHY_ROOT_CG 120
+#define IMX7D_PCIE_PHY_ROOT_DIV 121
+#define IMX7D_EPDC_PIXEL_ROOT_CLK 122
+#define IMX7D_EPDC_PIXEL_ROOT_SRC 123
+#define IMX7D_EPDC_PIXEL_ROOT_CG 124
+#define IMX7D_EPDC_PIXEL_ROOT_DIV 125
+#define IMX7D_LCDIF_PIXEL_ROOT_CLK 126
+#define IMX7D_LCDIF_PIXEL_ROOT_SRC 127
+#define IMX7D_LCDIF_PIXEL_ROOT_CG 128
+#define IMX7D_LCDIF_PIXEL_ROOT_DIV 129
+#define IMX7D_MIPI_DSI_ROOT_CLK 130
+#define IMX7D_MIPI_DSI_ROOT_SRC 131
+#define IMX7D_MIPI_DSI_ROOT_CG 132
+#define IMX7D_MIPI_DSI_ROOT_DIV 133
+#define IMX7D_MIPI_CSI_ROOT_CLK 134
+#define IMX7D_MIPI_CSI_ROOT_SRC 135
+#define IMX7D_MIPI_CSI_ROOT_CG 136
+#define IMX7D_MIPI_CSI_ROOT_DIV 137
+#define IMX7D_MIPI_DPHY_ROOT_CLK 138
+#define IMX7D_MIPI_DPHY_ROOT_SRC 139
+#define IMX7D_MIPI_DPHY_ROOT_CG 140
+#define IMX7D_MIPI_DPHY_ROOT_DIV 141
+#define IMX7D_SAI1_ROOT_CLK 142
+#define IMX7D_SAI1_ROOT_SRC 143
+#define IMX7D_SAI1_ROOT_CG 144
+#define IMX7D_SAI1_ROOT_DIV 145
+#define IMX7D_SAI2_ROOT_CLK 146
+#define IMX7D_SAI2_ROOT_SRC 147
+#define IMX7D_SAI2_ROOT_CG 148
+#define IMX7D_SAI2_ROOT_DIV 149
+#define IMX7D_SAI3_ROOT_CLK 150
+#define IMX7D_SAI3_ROOT_SRC 151
+#define IMX7D_SAI3_ROOT_CG 152
+#define IMX7D_SAI3_ROOT_DIV 153
+#define IMX7D_SPDIF_ROOT_CLK 154
+#define IMX7D_SPDIF_ROOT_SRC 155
+#define IMX7D_SPDIF_ROOT_CG 156
+#define IMX7D_SPDIF_ROOT_DIV 157
+#define IMX7D_ENET1_REF_ROOT_CLK 158
+#define IMX7D_ENET1_REF_ROOT_SRC 159
+#define IMX7D_ENET1_REF_ROOT_CG 160
+#define IMX7D_ENET1_REF_ROOT_DIV 161
+#define IMX7D_ENET1_TIME_ROOT_CLK 162
+#define IMX7D_ENET1_TIME_ROOT_SRC 163
+#define IMX7D_ENET1_TIME_ROOT_CG 164
+#define IMX7D_ENET1_TIME_ROOT_DIV 165
+#define IMX7D_ENET2_REF_ROOT_CLK 166
+#define IMX7D_ENET2_REF_ROOT_SRC 167
+#define IMX7D_ENET2_REF_ROOT_CG 168
+#define IMX7D_ENET2_REF_ROOT_DIV 169
+#define IMX7D_ENET2_TIME_ROOT_CLK 170
+#define IMX7D_ENET2_TIME_ROOT_SRC 171
+#define IMX7D_ENET2_TIME_ROOT_CG 172
+#define IMX7D_ENET2_TIME_ROOT_DIV 173
+#define IMX7D_ENET_PHY_REF_ROOT_CLK 174
+#define IMX7D_ENET_PHY_REF_ROOT_SRC 175
+#define IMX7D_ENET_PHY_REF_ROOT_CG 176
+#define IMX7D_ENET_PHY_REF_ROOT_DIV 177
+#define IMX7D_EIM_ROOT_CLK 178
+#define IMX7D_EIM_ROOT_SRC 179
+#define IMX7D_EIM_ROOT_CG 180
+#define IMX7D_EIM_ROOT_DIV 181
+#define IMX7D_NAND_ROOT_CLK 182
+#define IMX7D_NAND_ROOT_SRC 183
+#define IMX7D_NAND_ROOT_CG 184
+#define IMX7D_NAND_ROOT_DIV 185
+#define IMX7D_QSPI_ROOT_CLK 186
+#define IMX7D_QSPI_ROOT_SRC 187
+#define IMX7D_QSPI_ROOT_CG 188
+#define IMX7D_QSPI_ROOT_DIV 189
+#define IMX7D_USDHC1_ROOT_CLK 190
+#define IMX7D_USDHC1_ROOT_SRC 191
+#define IMX7D_USDHC1_ROOT_CG 192
+#define IMX7D_USDHC1_ROOT_DIV 193
+#define IMX7D_USDHC2_ROOT_CLK 194
+#define IMX7D_USDHC2_ROOT_SRC 195
+#define IMX7D_USDHC2_ROOT_CG 196
+#define IMX7D_USDHC2_ROOT_DIV 197
+#define IMX7D_USDHC3_ROOT_CLK 198
+#define IMX7D_USDHC3_ROOT_SRC 199
+#define IMX7D_USDHC3_ROOT_CG 200
+#define IMX7D_USDHC3_ROOT_DIV 201
+#define IMX7D_CAN1_ROOT_CLK 202
+#define IMX7D_CAN1_ROOT_SRC 203
+#define IMX7D_CAN1_ROOT_CG 204
+#define IMX7D_CAN1_ROOT_DIV 205
+#define IMX7D_CAN2_ROOT_CLK 206
+#define IMX7D_CAN2_ROOT_SRC 207
+#define IMX7D_CAN2_ROOT_CG 208
+#define IMX7D_CAN2_ROOT_DIV 209
+#define IMX7D_I2C1_ROOT_CLK 210
+#define IMX7D_I2C1_ROOT_SRC 211
+#define IMX7D_I2C1_ROOT_CG 212
+#define IMX7D_I2C1_ROOT_DIV 213
+#define IMX7D_I2C2_ROOT_CLK 214
+#define IMX7D_I2C2_ROOT_SRC 215
+#define IMX7D_I2C2_ROOT_CG 216
+#define IMX7D_I2C2_ROOT_DIV 217
+#define IMX7D_I2C3_ROOT_CLK 218
+#define IMX7D_I2C3_ROOT_SRC 219
+#define IMX7D_I2C3_ROOT_CG 220
+#define IMX7D_I2C3_ROOT_DIV 221
+#define IMX7D_I2C4_ROOT_CLK 222
+#define IMX7D_I2C4_ROOT_SRC 223
+#define IMX7D_I2C4_ROOT_CG 224
+#define IMX7D_I2C4_ROOT_DIV 225
+#define IMX7D_UART1_ROOT_CLK 226
+#define IMX7D_UART1_ROOT_SRC 227
+#define IMX7D_UART1_ROOT_CG 228
+#define IMX7D_UART1_ROOT_DIV 229
+#define IMX7D_UART2_ROOT_CLK 230
+#define IMX7D_UART2_ROOT_SRC 231
+#define IMX7D_UART2_ROOT_CG 232
+#define IMX7D_UART2_ROOT_DIV 233
+#define IMX7D_UART3_ROOT_CLK 234
+#define IMX7D_UART3_ROOT_SRC 235
+#define IMX7D_UART3_ROOT_CG 236
+#define IMX7D_UART3_ROOT_DIV 237
+#define IMX7D_UART4_ROOT_CLK 238
+#define IMX7D_UART4_ROOT_SRC 239
+#define IMX7D_UART4_ROOT_CG 240
+#define IMX7D_UART4_ROOT_DIV 241
+#define IMX7D_UART5_ROOT_CLK 242
+#define IMX7D_UART5_ROOT_SRC 243
+#define IMX7D_UART5_ROOT_CG 244
+#define IMX7D_UART5_ROOT_DIV 245
+#define IMX7D_UART6_ROOT_CLK 246
+#define IMX7D_UART6_ROOT_SRC 247
+#define IMX7D_UART6_ROOT_CG 248
+#define IMX7D_UART6_ROOT_DIV 249
+#define IMX7D_UART7_ROOT_CLK 250
+#define IMX7D_UART7_ROOT_SRC 251
+#define IMX7D_UART7_ROOT_CG 252
+#define IMX7D_UART7_ROOT_DIV 253
+#define IMX7D_ECSPI1_ROOT_CLK 254
+#define IMX7D_ECSPI1_ROOT_SRC 255
+#define IMX7D_ECSPI1_ROOT_CG 256
+#define IMX7D_ECSPI1_ROOT_DIV 257
+#define IMX7D_ECSPI2_ROOT_CLK 258
+#define IMX7D_ECSPI2_ROOT_SRC 259
+#define IMX7D_ECSPI2_ROOT_CG 260
+#define IMX7D_ECSPI2_ROOT_DIV 261
+#define IMX7D_ECSPI3_ROOT_CLK 262
+#define IMX7D_ECSPI3_ROOT_SRC 263
+#define IMX7D_ECSPI3_ROOT_CG 264
+#define IMX7D_ECSPI3_ROOT_DIV 265
+#define IMX7D_ECSPI4_ROOT_CLK 266
+#define IMX7D_ECSPI4_ROOT_SRC 267
+#define IMX7D_ECSPI4_ROOT_CG 268
+#define IMX7D_ECSPI4_ROOT_DIV 269
+#define IMX7D_PWM1_ROOT_CLK 270
+#define IMX7D_PWM1_ROOT_SRC 271
+#define IMX7D_PWM1_ROOT_CG 272
+#define IMX7D_PWM1_ROOT_DIV 273
+#define IMX7D_PWM2_ROOT_CLK 274
+#define IMX7D_PWM2_ROOT_SRC 275
+#define IMX7D_PWM2_ROOT_CG 276
+#define IMX7D_PWM2_ROOT_DIV 277
+#define IMX7D_PWM3_ROOT_CLK 278
+#define IMX7D_PWM3_ROOT_SRC 279
+#define IMX7D_PWM3_ROOT_CG 280
+#define IMX7D_PWM3_ROOT_DIV 281
+#define IMX7D_PWM4_ROOT_CLK 282
+#define IMX7D_PWM4_ROOT_SRC 283
+#define IMX7D_PWM4_ROOT_CG 284
+#define IMX7D_PWM4_ROOT_DIV 285
+#define IMX7D_FLEXTIMER1_ROOT_CLK 286
+#define IMX7D_FLEXTIMER1_ROOT_SRC 287
+#define IMX7D_FLEXTIMER1_ROOT_CG 288
+#define IMX7D_FLEXTIMER1_ROOT_DIV 289
+#define IMX7D_FLEXTIMER2_ROOT_CLK 290
+#define IMX7D_FLEXTIMER2_ROOT_SRC 291
+#define IMX7D_FLEXTIMER2_ROOT_CG 292
+#define IMX7D_FLEXTIMER2_ROOT_DIV 293
+#define IMX7D_SIM1_ROOT_CLK 294
+#define IMX7D_SIM1_ROOT_SRC 295
+#define IMX7D_SIM1_ROOT_CG 296
+#define IMX7D_SIM1_ROOT_DIV 297
+#define IMX7D_SIM2_ROOT_CLK 298
+#define IMX7D_SIM2_ROOT_SRC 299
+#define IMX7D_SIM2_ROOT_CG 300
+#define IMX7D_SIM2_ROOT_DIV 301
+#define IMX7D_GPT1_ROOT_CLK 302
+#define IMX7D_GPT1_ROOT_SRC 303
+#define IMX7D_GPT1_ROOT_CG 304
+#define IMX7D_GPT1_ROOT_DIV 305
+#define IMX7D_GPT2_ROOT_CLK 306
+#define IMX7D_GPT2_ROOT_SRC 307
+#define IMX7D_GPT2_ROOT_CG 308
+#define IMX7D_GPT2_ROOT_DIV 309
+#define IMX7D_GPT3_ROOT_CLK 310
+#define IMX7D_GPT3_ROOT_SRC 311
+#define IMX7D_GPT3_ROOT_CG 312
+#define IMX7D_GPT3_ROOT_DIV 313
+#define IMX7D_GPT4_ROOT_CLK 314
+#define IMX7D_GPT4_ROOT_SRC 315
+#define IMX7D_GPT4_ROOT_CG 316
+#define IMX7D_GPT4_ROOT_DIV 317
+#define IMX7D_TRACE_ROOT_CLK 318
+#define IMX7D_TRACE_ROOT_SRC 319
+#define IMX7D_TRACE_ROOT_CG 320
+#define IMX7D_TRACE_ROOT_DIV 321
+#define IMX7D_WDOG1_ROOT_CLK 322
+#define IMX7D_WDOG_ROOT_SRC 323
+#define IMX7D_WDOG_ROOT_CG 324
+#define IMX7D_WDOG_ROOT_DIV 325
+#define IMX7D_CSI_MCLK_ROOT_CLK 326
+#define IMX7D_CSI_MCLK_ROOT_SRC 327
+#define IMX7D_CSI_MCLK_ROOT_CG 328
+#define IMX7D_CSI_MCLK_ROOT_DIV 329
+#define IMX7D_AUDIO_MCLK_ROOT_CLK 330
+#define IMX7D_AUDIO_MCLK_ROOT_SRC 331
+#define IMX7D_AUDIO_MCLK_ROOT_CG 332
+#define IMX7D_AUDIO_MCLK_ROOT_DIV 333
+#define IMX7D_WRCLK_ROOT_CLK 334
+#define IMX7D_WRCLK_ROOT_SRC 335
+#define IMX7D_WRCLK_ROOT_CG 336
+#define IMX7D_WRCLK_ROOT_DIV 337
+#define IMX7D_CLKO1_ROOT_SRC 338
+#define IMX7D_CLKO1_ROOT_CG 339
+#define IMX7D_CLKO1_ROOT_DIV 340
+#define IMX7D_CLKO2_ROOT_SRC 341
+#define IMX7D_CLKO2_ROOT_CG 342
+#define IMX7D_CLKO2_ROOT_DIV 343
+#define IMX7D_MAIN_AXI_ROOT_PRE_DIV 344
+#define IMX7D_DISP_AXI_ROOT_PRE_DIV 345
+#define IMX7D_ENET_AXI_ROOT_PRE_DIV 346
+#define IMX7D_NAND_USDHC_BUS_ROOT_PRE_DIV 347
+#define IMX7D_AHB_CHANNEL_ROOT_PRE_DIV 348
+#define IMX7D_USB_HSIC_ROOT_PRE_DIV 349
+#define IMX7D_PCIE_CTRL_ROOT_PRE_DIV 350
+#define IMX7D_PCIE_PHY_ROOT_PRE_DIV 351
+#define IMX7D_EPDC_PIXEL_ROOT_PRE_DIV 352
+#define IMX7D_LCDIF_PIXEL_ROOT_PRE_DIV 353
+#define IMX7D_MIPI_DSI_ROOT_PRE_DIV 354
+#define IMX7D_MIPI_CSI_ROOT_PRE_DIV 355
+#define IMX7D_MIPI_DPHY_ROOT_PRE_DIV 356
+#define IMX7D_SAI1_ROOT_PRE_DIV 357
+#define IMX7D_SAI2_ROOT_PRE_DIV 358
+#define IMX7D_SAI3_ROOT_PRE_DIV 359
+#define IMX7D_SPDIF_ROOT_PRE_DIV 360
+#define IMX7D_ENET1_REF_ROOT_PRE_DIV 361
+#define IMX7D_ENET1_TIME_ROOT_PRE_DIV 362
+#define IMX7D_ENET2_REF_ROOT_PRE_DIV 363
+#define IMX7D_ENET2_TIME_ROOT_PRE_DIV 364
+#define IMX7D_ENET_PHY_REF_ROOT_PRE_DIV 365
+#define IMX7D_EIM_ROOT_PRE_DIV 366
+#define IMX7D_NAND_ROOT_PRE_DIV 367
+#define IMX7D_QSPI_ROOT_PRE_DIV 368
+#define IMX7D_USDHC1_ROOT_PRE_DIV 369
+#define IMX7D_USDHC2_ROOT_PRE_DIV 370
+#define IMX7D_USDHC3_ROOT_PRE_DIV 371
+#define IMX7D_CAN1_ROOT_PRE_DIV 372
+#define IMX7D_CAN2_ROOT_PRE_DIV 373
+#define IMX7D_I2C1_ROOT_PRE_DIV 374
+#define IMX7D_I2C2_ROOT_PRE_DIV 375
+#define IMX7D_I2C3_ROOT_PRE_DIV 376
+#define IMX7D_I2C4_ROOT_PRE_DIV 377
+#define IMX7D_UART1_ROOT_PRE_DIV 378
+#define IMX7D_UART2_ROOT_PRE_DIV 379
+#define IMX7D_UART3_ROOT_PRE_DIV 380
+#define IMX7D_UART4_ROOT_PRE_DIV 381
+#define IMX7D_UART5_ROOT_PRE_DIV 382
+#define IMX7D_UART6_ROOT_PRE_DIV 383
+#define IMX7D_UART7_ROOT_PRE_DIV 384
+#define IMX7D_ECSPI1_ROOT_PRE_DIV 385
+#define IMX7D_ECSPI2_ROOT_PRE_DIV 386
+#define IMX7D_ECSPI3_ROOT_PRE_DIV 387
+#define IMX7D_ECSPI4_ROOT_PRE_DIV 388
+#define IMX7D_PWM1_ROOT_PRE_DIV 389
+#define IMX7D_PWM2_ROOT_PRE_DIV 390
+#define IMX7D_PWM3_ROOT_PRE_DIV 391
+#define IMX7D_PWM4_ROOT_PRE_DIV 392
+#define IMX7D_FLEXTIMER1_ROOT_PRE_DIV 393
+#define IMX7D_FLEXTIMER2_ROOT_PRE_DIV 394
+#define IMX7D_SIM1_ROOT_PRE_DIV 395
+#define IMX7D_SIM2_ROOT_PRE_DIV 396
+#define IMX7D_GPT1_ROOT_PRE_DIV 397
+#define IMX7D_GPT2_ROOT_PRE_DIV 398
+#define IMX7D_GPT3_ROOT_PRE_DIV 399
+#define IMX7D_GPT4_ROOT_PRE_DIV 400
+#define IMX7D_TRACE_ROOT_PRE_DIV 401
+#define IMX7D_WDOG_ROOT_PRE_DIV 402
+#define IMX7D_CSI_MCLK_ROOT_PRE_DIV 403
+#define IMX7D_AUDIO_MCLK_ROOT_PRE_DIV 404
+#define IMX7D_WRCLK_ROOT_PRE_DIV 405
+#define IMX7D_CLKO1_ROOT_PRE_DIV 406
+#define IMX7D_CLKO2_ROOT_PRE_DIV 407
+#define IMX7D_DRAM_PHYM_ALT_ROOT_PRE_DIV 408
+#define IMX7D_DRAM_ALT_ROOT_PRE_DIV 409
+#define IMX7D_LVDS1_IN_CLK 410
+#define IMX7D_LVDS1_OUT_SEL 411
+#define IMX7D_LVDS1_OUT_CLK 412
+#define IMX7D_CLK_DUMMY 413
+#define IMX7D_GPT_3M_CLK 414
+#define IMX7D_OCRAM_CLK 415
+#define IMX7D_OCRAM_S_CLK 416
+#define IMX7D_WDOG2_ROOT_CLK 417
+#define IMX7D_WDOG3_ROOT_CLK 418
+#define IMX7D_WDOG4_ROOT_CLK 419
+#define IMX7D_SDMA_CORE_CLK 420
+#define IMX7D_USB1_MAIN_480M_CLK 421
+#define IMX7D_USB_CTRL_CLK 422
+#define IMX7D_USB_PHY1_CLK 423
+#define IMX7D_USB_PHY2_CLK 424
+#define IMX7D_IPG_ROOT_CLK 425
+#define IMX7D_SAI1_IPG_CLK 426
+#define IMX7D_SAI2_IPG_CLK 427
+#define IMX7D_SAI3_IPG_CLK 428
+#define IMX7D_PLL_AUDIO_TEST_DIV 429
+#define IMX7D_PLL_AUDIO_POST_DIV 430
+#define IMX7D_PLL_VIDEO_TEST_DIV 431
+#define IMX7D_PLL_VIDEO_POST_DIV 432
+#define IMX7D_MU_ROOT_CLK 433
+#define IMX7D_SEMA4_HS_ROOT_CLK 434
+#define IMX7D_PLL_DRAM_TEST_DIV 435
+#define IMX7D_CLK_END 436
+#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
#define R8A73A4_CLK_IIC3 11
#define R8A73A4_CLK_IIC4 10
#define R8A73A4_CLK_IIC5 9
+#define R8A73A4_CLK_IRQC 7
/* MSTP5 */
#define R8A73A4_CLK_THERMAL 22
#define R8A7790_CLK_USBDMAC0 30
#define R8A7790_CLK_USBDMAC1 31
+/* MSTP4 */
+#define R8A7790_CLK_IRQC 7
+
/* MSTP5 */
#define R8A7790_CLK_AUDIO_DMAC1 1
#define R8A7790_CLK_AUDIO_DMAC0 2
#define R8A7791_CLK_USBDMAC0 30
#define R8A7791_CLK_USBDMAC1 31
+/* MSTP4 */
+#define R8A7791_CLK_IRQC 7
+
/* MSTP5 */
#define R8A7791_CLK_AUDIO_DMAC1 1
#define R8A7791_CLK_AUDIO_DMAC0 2
#define R8A7794_CLK_USBDMAC0 30
#define R8A7794_CLK_USBDMAC1 31
+/* MSTP4 */
+#define R8A7794_CLK_IRQC 7
+
/* MSTP5 */
#define R8A7794_CLK_THERMAL 22
#define R8A7794_CLK_PWM 23
--- /dev/null
+/*
+ * Copyright (C) 2015 Markus Reichl
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clocks for the Samsung S2MPS11 PMIC.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S2MPS11_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S2MPS11_CLOCK_H
+
+/* Fixed rate clocks. */
+
+#define S2MPS11_CLK_AP 0
+#define S2MPS11_CLK_CP 1
+#define S2MPS11_CLK_BT 2
+
+/* Total number of clocks. */
+#define S2MPS11_CLKS_NUM (S2MPS11_CLK_BT + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S2MPS11_CLOCK_H */
#define VF610_PLL6_BYPASS 180
#define VF610_PLL7_BYPASS 181
#define VF610_CLK_SNVS 182
-#define VF610_CLK_END 183
+#define VF610_CLK_DAP 183
+#define VF610_CLK_END 184
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_ZX296702_H
+#define __DT_BINDINGS_CLOCK_ZX296702_H
+
+#define ZX296702_OSC 0
+#define ZX296702_PLL_A9 1
+#define ZX296702_PLL_A9_350M 2
+#define ZX296702_PLL_MAC_1000M 3
+#define ZX296702_PLL_MAC_333M 4
+#define ZX296702_PLL_MM0_1188M 5
+#define ZX296702_PLL_MM0_396M 6
+#define ZX296702_PLL_MM0_198M 7
+#define ZX296702_PLL_MM1_108M 8
+#define ZX296702_PLL_MM1_72M 9
+#define ZX296702_PLL_MM1_54M 10
+#define ZX296702_PLL_LSP_104M 11
+#define ZX296702_PLL_LSP_26M 12
+#define ZX296702_PLL_AUDIO_294M912 13
+#define ZX296702_PLL_DDR_266M 14
+#define ZX296702_CLK_148M5 15
+#define ZX296702_MATRIX_ACLK 16
+#define ZX296702_MAIN_HCLK 17
+#define ZX296702_MAIN_PCLK 18
+#define ZX296702_CLK_500 19
+#define ZX296702_CLK_250 20
+#define ZX296702_CLK_125 21
+#define ZX296702_CLK_74M25 22
+#define ZX296702_A9_WCLK 23
+#define ZX296702_A9_AS1_ACLK_MUX 24
+#define ZX296702_A9_TRACE_CLKIN_MUX 25
+#define ZX296702_A9_AS1_ACLK_DIV 26
+#define ZX296702_CLK_2 27
+#define ZX296702_CLK_27 28
+#define ZX296702_DECPPU_ACLK_MUX 29
+#define ZX296702_PPU_ACLK_MUX 30
+#define ZX296702_MALI400_ACLK_MUX 31
+#define ZX296702_VOU_ACLK_MUX 32
+#define ZX296702_VOU_MAIN_WCLK_MUX 33
+#define ZX296702_VOU_AUX_WCLK_MUX 34
+#define ZX296702_VOU_SCALER_WCLK_MUX 35
+#define ZX296702_R2D_ACLK_MUX 36
+#define ZX296702_R2D_WCLK_MUX 37
+#define ZX296702_CLK_50 38
+#define ZX296702_CLK_25 39
+#define ZX296702_CLK_12 40
+#define ZX296702_CLK_16M384 41
+#define ZX296702_CLK_32K768 42
+#define ZX296702_SEC_WCLK_DIV 43
+#define ZX296702_DDR_WCLK_MUX 44
+#define ZX296702_NAND_WCLK_MUX 45
+#define ZX296702_LSP_26_WCLK_MUX 46
+#define ZX296702_A9_AS0_ACLK 47
+#define ZX296702_A9_AS1_ACLK 48
+#define ZX296702_A9_TRACE_CLKIN 49
+#define ZX296702_DECPPU_AXI_M_ACLK 50
+#define ZX296702_DECPPU_AHB_S_HCLK 51
+#define ZX296702_PPU_AXI_M_ACLK 52
+#define ZX296702_PPU_AHB_S_HCLK 53
+#define ZX296702_VOU_AXI_M_ACLK 54
+#define ZX296702_VOU_APB_PCLK 55
+#define ZX296702_VOU_MAIN_CHANNEL_WCLK 56
+#define ZX296702_VOU_AUX_CHANNEL_WCLK 57
+#define ZX296702_VOU_HDMI_OSCLK_CEC 58
+#define ZX296702_VOU_SCALER_WCLK 59
+#define ZX296702_MALI400_AXI_M_ACLK 60
+#define ZX296702_MALI400_APB_PCLK 61
+#define ZX296702_R2D_WCLK 62
+#define ZX296702_R2D_AXI_M_ACLK 63
+#define ZX296702_R2D_AHB_HCLK 64
+#define ZX296702_DDR3_AXI_S0_ACLK 65
+#define ZX296702_DDR3_APB_PCLK 66
+#define ZX296702_DDR3_WCLK 67
+#define ZX296702_USB20_0_AHB_HCLK 68
+#define ZX296702_USB20_0_EXTREFCLK 69
+#define ZX296702_USB20_1_AHB_HCLK 70
+#define ZX296702_USB20_1_EXTREFCLK 71
+#define ZX296702_USB20_2_AHB_HCLK 72
+#define ZX296702_USB20_2_EXTREFCLK 73
+#define ZX296702_GMAC_AXI_M_ACLK 74
+#define ZX296702_GMAC_APB_PCLK 75
+#define ZX296702_GMAC_125_CLKIN 76
+#define ZX296702_GMAC_RMII_CLKIN 77
+#define ZX296702_GMAC_25M_CLK 78
+#define ZX296702_NANDFLASH_AHB_HCLK 79
+#define ZX296702_NANDFLASH_WCLK 80
+#define ZX296702_LSP0_APB_PCLK 81
+#define ZX296702_LSP0_AHB_HCLK 82
+#define ZX296702_LSP0_26M_WCLK 83
+#define ZX296702_LSP0_104M_WCLK 84
+#define ZX296702_LSP0_16M384_WCLK 85
+#define ZX296702_LSP1_APB_PCLK 86
+#define ZX296702_LSP1_26M_WCLK 87
+#define ZX296702_LSP1_104M_WCLK 88
+#define ZX296702_LSP1_32K_CLK 89
+#define ZX296702_AON_HCLK 90
+#define ZX296702_SYS_CTRL_PCLK 91
+#define ZX296702_DMA_PCLK 92
+#define ZX296702_DMA_ACLK 93
+#define ZX296702_SEC_HCLK 94
+#define ZX296702_AES_WCLK 95
+#define ZX296702_DES_WCLK 96
+#define ZX296702_IRAM_ACLK 97
+#define ZX296702_IROM_ACLK 98
+#define ZX296702_BOOT_CTRL_HCLK 99
+#define ZX296702_EFUSE_CLK_30 100
+#define ZX296702_VOU_MAIN_CHANNEL_DIV 101
+#define ZX296702_VOU_AUX_CHANNEL_DIV 102
+#define ZX296702_VOU_TV_ENC_HD_DIV 103
+#define ZX296702_VOU_TV_ENC_SD_DIV 104
+#define ZX296702_VL0_MUX 105
+#define ZX296702_VL1_MUX 106
+#define ZX296702_VL2_MUX 107
+#define ZX296702_GL0_MUX 108
+#define ZX296702_GL1_MUX 109
+#define ZX296702_GL2_MUX 110
+#define ZX296702_WB_MUX 111
+#define ZX296702_HDMI_MUX 112
+#define ZX296702_VOU_TV_ENC_HD_MUX 113
+#define ZX296702_VOU_TV_ENC_SD_MUX 114
+#define ZX296702_VL0_CLK 115
+#define ZX296702_VL1_CLK 116
+#define ZX296702_VL2_CLK 117
+#define ZX296702_GL0_CLK 118
+#define ZX296702_GL1_CLK 119
+#define ZX296702_GL2_CLK 120
+#define ZX296702_WB_CLK 121
+#define ZX296702_CL_CLK 122
+#define ZX296702_MAIN_MIX_CLK 123
+#define ZX296702_AUX_MIX_CLK 124
+#define ZX296702_HDMI_CLK 125
+#define ZX296702_VOU_TV_ENC_HD_DAC_CLK 126
+#define ZX296702_VOU_TV_ENC_SD_DAC_CLK 127
+#define ZX296702_A9_PERIPHCLK 128
+#define ZX296702_TOPCLK_END 129
+
+#define ZX296702_SDMMC1_WCLK_MUX 0
+#define ZX296702_SDMMC1_WCLK_DIV 1
+#define ZX296702_SDMMC1_WCLK 2
+#define ZX296702_SDMMC1_PCLK 3
+#define ZX296702_SPDIF0_WCLK_MUX 4
+#define ZX296702_SPDIF0_WCLK 5
+#define ZX296702_SPDIF0_PCLK 6
+#define ZX296702_SPDIF0_DIV 7
+#define ZX296702_I2S0_WCLK_MUX 8
+#define ZX296702_I2S0_WCLK 9
+#define ZX296702_I2S0_PCLK 10
+#define ZX296702_I2S0_DIV 11
+#define ZX296702_LSP0CLK_END 12
+
+#define ZX296702_UART0_WCLK_MUX 0
+#define ZX296702_UART0_WCLK 1
+#define ZX296702_UART0_PCLK 2
+#define ZX296702_UART1_WCLK_MUX 3
+#define ZX296702_UART1_WCLK 4
+#define ZX296702_UART1_PCLK 5
+#define ZX296702_SDMMC0_WCLK_MUX 6
+#define ZX296702_SDMMC0_WCLK_DIV 7
+#define ZX296702_SDMMC0_WCLK 8
+#define ZX296702_SDMMC0_PCLK 9
+#define ZX296702_LSP1CLK_END 10
+
+#endif /* __DT_BINDINGS_CLOCK_ZX296702_H */
--- /dev/null
+/*
+ * This header provides shared DT/Driver defines for ST's LPC device
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ */
+
+#ifndef __DT_BINDINGS_ST_LPC_H__
+#define __DT_BINDINGS_ST_LPC_H__
+
+#define ST_LPC_MODE_RTC 0
+#define ST_LPC_MODE_WDT 1
+
+#endif /* __DT_BINDINGS_ST_LPC_H__ */
#define SLEWCTRL_SLOW (1 << 19)
#define SLEWCTRL_FAST 0
#define DS0_PULL_UP_DOWN_EN (1 << 27)
+#define WAKEUP_ENABLE (1 << 29)
#define PIN_OUTPUT (PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (PULL_UP)
--- /dev/null
+/*
+ * Header providing constants for bcm2835 pinctrl bindings.
+ *
+ * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_BCM2835_H__
+#define __DT_BINDINGS_PINCTRL_BCM2835_H__
+
+/* brcm,function property */
+#define BCM2835_FSEL_GPIO_IN 0
+#define BCM2835_FSEL_GPIO_OUT 1
+#define BCM2835_FSEL_ALT5 2
+#define BCM2835_FSEL_ALT4 3
+#define BCM2835_FSEL_ALT0 4
+#define BCM2835_FSEL_ALT1 5
+#define BCM2835_FSEL_ALT2 6
+#define BCM2835_FSEL_ALT3 7
+
+#endif /* __DT_BINDINGS_PINCTRL_BCM2835_H__ */
* Extended Capability Register
*/
+#define ecap_pasid(e) ((e >> 40) & 0x1)
#define ecap_pss(e) ((e >> 35) & 0x1f)
#define ecap_eafs(e) ((e >> 34) & 0x1)
#define ecap_nwfs(e) ((e >> 33) & 0x1)
#define ecap_srs(e) ((e >> 31) & 0x1)
#define ecap_ers(e) ((e >> 30) & 0x1)
#define ecap_prs(e) ((e >> 29) & 0x1)
-#define ecap_pasid(e) ((e >> 28) & 0x1)
+/* PASID support used to be on bit 28 */
#define ecap_dis(e) ((e >> 27) & 0x1)
#define ecap_nest(e) ((e >> 26) & 0x1)
#define ecap_mts(e) ((e >> 25) & 0x1)
extern int irq_chip_compose_msi_msg(struct irq_data *data, struct msi_msg *msg);
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
+extern void irq_chip_enable_parent(struct irq_data *data);
+extern void irq_chip_disable_parent(struct irq_data *data);
extern void irq_chip_ack_parent(struct irq_data *data);
extern int irq_chip_retrigger_hierarchy(struct irq_data *data);
extern void irq_chip_mask_parent(struct irq_data *data);
/* V2 interfaces to support hierarchy IRQ domains. */
extern struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain,
unsigned int virq);
+extern void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq, struct irq_chip *chip,
+ void *chip_data, irq_flow_handler_t handler,
+ void *handler_data, const char *handler_name);
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
extern struct irq_domain *irq_domain_add_hierarchy(struct irq_domain *parent,
unsigned int flags, unsigned int size,
irq_hw_number_t hwirq,
struct irq_chip *chip,
void *chip_data);
-extern void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
- irq_hw_number_t hwirq, struct irq_chip *chip,
- void *chip_data, irq_flow_handler_t handler,
- void *handler_data, const char *handler_name);
extern void irq_domain_reset_irq_data(struct irq_data *irq_data);
extern void irq_domain_free_irqs_common(struct irq_domain *domain,
unsigned int virq,
*/
#ifdef CONFIG_PLAT_ORION
extern const struct mbus_dram_target_info *mv_mbus_dram_info(void);
+extern const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void);
#else
static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
{
return NULL;
}
+static inline const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void)
+{
+ return NULL;
+}
#endif
int mvebu_mbus_save_cpu_target(u32 *store_addr);
--- /dev/null
+/*
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals
+ * registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_MC_H_
+#define _LINUX_MFD_SYSCON_ATMEL_MC_H_
+
+/* Memory Controller */
+#define AT91_MC_RCR 0x00
+#define AT91_MC_RCB BIT(0)
+
+#define AT91_MC_ASR 0x04
+#define AT91_MC_UNADD BIT(0)
+#define AT91_MC_MISADD BIT(1)
+#define AT91_MC_ABTSZ GENMASK(9, 8)
+#define AT91_MC_ABTSZ_BYTE (0 << 8)
+#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
+#define AT91_MC_ABTSZ_WORD (2 << 8)
+#define AT91_MC_ABTTYP GENMASK(11, 10)
+#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
+#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
+#define AT91_MC_ABTTYP_FETCH (2 << 10)
+#define AT91_MC_MST(n) BIT(16 + (n))
+#define AT91_MC_SVMST(n) BIT(24 + (n))
+
+#define AT91_MC_AASR 0x08
+
+#define AT91_MC_MPR 0x0c
+#define AT91_MPR_MSTP(n) GENMASK(2 + ((x) * 4), ((x) * 4))
+
+/* External Bus Interface (EBI) registers */
+#define AT91_MC_EBI_CSA 0x60
+#define AT91_MC_EBI_CS(n) BIT(x)
+#define AT91_MC_EBI_NUM_CS 8
+
+#define AT91_MC_EBI_CFGR 0x64
+#define AT91_MC_EBI_DBPUC BIT(0)
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_MC_SMC_CSR(n) (0x70 + ((n) * 4))
+#define AT91_MC_SMC_NWS GENMASK(6, 0)
+#define AT91_MC_SMC_NWS_(x) ((x) << 0)
+#define AT91_MC_SMC_WSEN BIT(7)
+#define AT91_MC_SMC_TDF GENMASK(11, 8)
+#define AT91_MC_SMC_TDF_(x) ((x) << 8)
+#define AT91_MC_SMC_TDF_MAX 0xf
+#define AT91_MC_SMC_BAT BIT(12)
+#define AT91_MC_SMC_DBW GENMASK(14, 13)
+#define AT91_MC_SMC_DBW_16 (1 << 13)
+#define AT91_MC_SMC_DBW_8 (2 << 13)
+#define AT91_MC_SMC_DPR BIT(15)
+#define AT91_MC_SMC_ACSS GENMASK(17, 16)
+#define AT91_MC_SMC_ACSS_(x) ((x) << 16)
+#define AT91_MC_SMC_ACSS_MAX 3
+#define AT91_MC_SMC_RWSETUP GENMASK(26, 24)
+#define AT91_MC_SMC_RWSETUP_(x) ((x) << 24)
+#define AT91_MC_SMC_RWHOLD GENMASK(30, 28)
+#define AT91_MC_SMC_RWHOLD_(x) ((x) << 28)
+#define AT91_MC_SMC_RWHOLDSETUP_MAX 7
+
+/* SDRAM Controller registers */
+#define AT91_MC_SDRAMC_MR 0x90
+#define AT91_MC_SDRAMC_MODE GENMASK(3, 0)
+#define AT91_MC_SDRAMC_MODE_NORMAL (0 << 0)
+#define AT91_MC_SDRAMC_MODE_NOP (1 << 0)
+#define AT91_MC_SDRAMC_MODE_PRECHARGE (2 << 0)
+#define AT91_MC_SDRAMC_MODE_LMR (3 << 0)
+#define AT91_MC_SDRAMC_MODE_REFRESH (4 << 0)
+#define AT91_MC_SDRAMC_DBW_16 BIT(4)
+
+#define AT91_MC_SDRAMC_TR 0x94
+#define AT91_MC_SDRAMC_COUNT GENMASK(11, 0)
+
+#define AT91_MC_SDRAMC_CR 0x98
+#define AT91_MC_SDRAMC_NC GENMASK(1, 0)
+#define AT91_MC_SDRAMC_NC_8 (0 << 0)
+#define AT91_MC_SDRAMC_NC_9 (1 << 0)
+#define AT91_MC_SDRAMC_NC_10 (2 << 0)
+#define AT91_MC_SDRAMC_NC_11 (3 << 0)
+#define AT91_MC_SDRAMC_NR GENMASK(3, 2)
+#define AT91_MC_SDRAMC_NR_11 (0 << 2)
+#define AT91_MC_SDRAMC_NR_12 (1 << 2)
+#define AT91_MC_SDRAMC_NR_13 (2 << 2)
+#define AT91_MC_SDRAMC_NB BIT(4)
+#define AT91_MC_SDRAMC_NB_2 (0 << 4)
+#define AT91_MC_SDRAMC_NB_4 (1 << 4)
+#define AT91_MC_SDRAMC_CAS GENMASK(6, 5)
+#define AT91_MC_SDRAMC_CAS_2 (2 << 5)
+#define AT91_MC_SDRAMC_TWR GENMASK(10, 7)
+#define AT91_MC_SDRAMC_TRC GENMASK(14, 11)
+#define AT91_MC_SDRAMC_TRP GENMASK(18, 15)
+#define AT91_MC_SDRAMC_TRCD GENMASK(22, 19)
+#define AT91_MC_SDRAMC_TRAS GENMASK(26, 23)
+#define AT91_MC_SDRAMC_TXSR GENMASK(30, 27)
+
+#define AT91_MC_SDRAMC_SRR 0x9c
+#define AT91_MC_SDRAMC_SRCB BIT(0)
+
+#define AT91_MC_SDRAMC_LPR 0xa0
+#define AT91_MC_SDRAMC_LPCB BIT(0)
+
+#define AT91_MC_SDRAMC_IER 0xa4
+#define AT91_MC_SDRAMC_IDR 0xa8
+#define AT91_MC_SDRAMC_IMR 0xac
+#define AT91_MC_SDRAMC_ISR 0xb0
+#define AT91_MC_SDRAMC_RES BIT(0)
+
+/* Burst Flash Controller register */
+#define AT91_MC_BFC_MR 0xc0
+#define AT91_MC_BFC_BFCOM GENMASK(1, 0)
+#define AT91_MC_BFC_BFCOM_DISABLED (0 << 0)
+#define AT91_MC_BFC_BFCOM_ASYNC (1 << 0)
+#define AT91_MC_BFC_BFCOM_BURST (2 << 0)
+#define AT91_MC_BFC_BFCC GENMASK(3, 2)
+#define AT91_MC_BFC_BFCC_MCK (1 << 2)
+#define AT91_MC_BFC_BFCC_DIV2 (2 << 2)
+#define AT91_MC_BFC_BFCC_DIV4 (3 << 2)
+#define AT91_MC_BFC_AVL GENMASK(7, 4)
+#define AT91_MC_BFC_PAGES GENMASK(10, 8)
+#define AT91_MC_BFC_PAGES_NO_PAGE (0 << 8)
+#define AT91_MC_BFC_PAGES_16 (1 << 8)
+#define AT91_MC_BFC_PAGES_32 (2 << 8)
+#define AT91_MC_BFC_PAGES_64 (3 << 8)
+#define AT91_MC_BFC_PAGES_128 (4 << 8)
+#define AT91_MC_BFC_PAGES_256 (5 << 8)
+#define AT91_MC_BFC_PAGES_512 (6 << 8)
+#define AT91_MC_BFC_PAGES_1024 (7 << 8)
+#define AT91_MC_BFC_OEL GENMASK(13, 12)
+#define AT91_MC_BFC_BAAEN BIT(16)
+#define AT91_MC_BFC_BFOEH BIT(17)
+#define AT91_MC_BFC_MUXEN BIT(18)
+#define AT91_MC_BFC_RDYEN BIT(19)
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_MC_H_ */
-/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+#define QCOM_SCM_HDCP_MAX_REQ_CNT 5
+
+struct qcom_scm_hdcp_req {
+ u32 addr;
+ u32 val;
+};
+
+extern bool qcom_scm_hdcp_available(void);
+extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
+
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1
--- /dev/null
+/*
+ * Broadcom BCM63xx Processor Monitor Bus shared routines (SMP and reset)
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __BCM63XX_PMB_H
+#define __BCM63XX_PMB_H
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+/* PMB Master controller register */
+#define PMB_CTRL 0x00
+#define PMC_PMBM_START (1 << 31)
+#define PMC_PMBM_TIMEOUT (1 << 30)
+#define PMC_PMBM_SLAVE_ERR (1 << 29)
+#define PMC_PMBM_BUSY (1 << 28)
+#define PMC_PMBM_READ (0 << 20)
+#define PMC_PMBM_WRITE (1 << 20)
+#define PMB_WR_DATA 0x04
+#define PMB_TIMEOUT 0x08
+#define PMB_RD_DATA 0x0C
+
+#define PMB_BUS_ID_SHIFT 8
+
+/* Perform the low-level PMB master operation, shared between reads and
+ * writes.
+ */
+static inline int __bpcm_do_op(void __iomem *master, unsigned int addr,
+ u32 off, u32 op)
+{
+ unsigned int timeout = 1000;
+ u32 cmd;
+
+ cmd = (PMC_PMBM_START | op | (addr & 0xff) << 12 | off);
+ writel(cmd, master + PMB_CTRL);
+ do {
+ cmd = readl(master + PMB_CTRL);
+ if (!(cmd & PMC_PMBM_START))
+ return 0;
+
+ if (cmd & PMC_PMBM_SLAVE_ERR)
+ return -EIO;
+
+ if (cmd & PMC_PMBM_TIMEOUT)
+ return -ETIMEDOUT;
+
+ udelay(1);
+ } while (timeout-- > 0);
+
+ return -ETIMEDOUT;
+}
+
+static inline int bpcm_rd(void __iomem *master, unsigned int addr,
+ u32 off, u32 *val)
+{
+ int ret = 0;
+
+ ret = __bpcm_do_op(master, addr, off >> 2, PMC_PMBM_READ);
+ *val = readl(master + PMB_RD_DATA);
+
+ return ret;
+}
+
+static inline int bpcm_wr(void __iomem *master, unsigned int addr,
+ u32 off, u32 val)
+{
+ int ret = 0;
+
+ writel(val, master + PMB_WR_DATA);
+ ret = __bpcm_do_op(master, addr, off >> 2, PMC_PMBM_WRITE);
+
+ return ret;
+}
+
+#endif /* __BCM63XX_PMB_H */
--- /dev/null
+/*
+ * Allwinner SoCs SRAM Controller Driver
+ *
+ * Copyright (C) 2015 Maxime Ripard
+ *
+ * Author: Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _SUNXI_SRAM_H_
+#define _SUNXI_SRAM_H_
+
+int sunxi_sram_claim(struct device *dev);
+int sunxi_sram_release(struct device *dev);
+
+#endif /* _SUNXI_SRAM_H_ */
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (SDRAMC only) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_SDRAMC_H
-#define AT91RM9200_SDRAMC_H
-
-/* SDRAM Controller registers */
-#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */
-#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0)
-#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0)
-#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0)
-#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0)
-#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0)
-#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */
-#define AT91RM9200_SDRAMC_DBW_32 (0 << 4)
-#define AT91RM9200_SDRAMC_DBW_16 (1 << 4)
-
-#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */
-#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
-
-#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */
-#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91RM9200_SDRAMC_NC_8 (0 << 0)
-#define AT91RM9200_SDRAMC_NC_9 (1 << 0)
-#define AT91RM9200_SDRAMC_NC_10 (2 << 0)
-#define AT91RM9200_SDRAMC_NC_11 (3 << 0)
-#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91RM9200_SDRAMC_NR_11 (0 << 2)
-#define AT91RM9200_SDRAMC_NR_12 (1 << 2)
-#define AT91RM9200_SDRAMC_NR_13 (2 << 2)
-#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91RM9200_SDRAMC_NB_2 (0 << 4)
-#define AT91RM9200_SDRAMC_NB_4 (1 << 4)
-#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91RM9200_SDRAMC_CAS_2 (2 << 5)
-#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
-#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
-#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
-#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
-#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
-#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
-
-#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */
-#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */
-#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */
-#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */
-#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */
-#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */
-
-#endif
--- /dev/null
+/*
+ * Copyright 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_IMX_REVISION_H__
+#define __SOC_IMX_REVISION_H__
+
+#define IMX_CHIP_REVISION_1_0 0x10
+#define IMX_CHIP_REVISION_1_1 0x11
+#define IMX_CHIP_REVISION_1_2 0x12
+#define IMX_CHIP_REVISION_1_3 0x13
+#define IMX_CHIP_REVISION_1_4 0x14
+#define IMX_CHIP_REVISION_1_5 0x15
+#define IMX_CHIP_REVISION_2_0 0x20
+#define IMX_CHIP_REVISION_2_1 0x21
+#define IMX_CHIP_REVISION_2_2 0x22
+#define IMX_CHIP_REVISION_2_3 0x23
+#define IMX_CHIP_REVISION_3_0 0x30
+#define IMX_CHIP_REVISION_3_1 0x31
+#define IMX_CHIP_REVISION_3_2 0x32
+#define IMX_CHIP_REVISION_3_3 0x33
+#define IMX_CHIP_REVISION_UNKNOWN 0xff
+
+int mx27_revision(void);
+int mx31_revision(void);
+int mx35_revision(void);
+int mx51_revision(void);
+int mx53_revision(void);
+
+unsigned int imx_get_soc_revision(void);
+void imx_print_silicon_rev(const char *cpu, int srev);
+
+#endif /* __SOC_IMX_REVISION_H__ */
--- /dev/null
+/*
+ * Copyright 2015 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_IMX_TIMER_H__
+#define __SOC_IMX_TIMER_H__
+
+enum imx_gpt_type {
+ GPT_TYPE_IMX1, /* i.MX1 */
+ GPT_TYPE_IMX21, /* i.MX21/27 */
+ GPT_TYPE_IMX31, /* i.MX31/35/25/37/51/6Q */
+ GPT_TYPE_IMX6DL, /* i.MX6DL/SX/SL */
+};
+
+/*
+ * This is a stop-gap solution for clock drivers like imx1/imx21 which call
+ * mxc_timer_init() to initialize timer for non-DT boot. It can be removed
+ * when these legacy non-DT support is converted or dropped.
+ */
+void mxc_timer_init(unsigned long pbase, int irq, enum imx_gpt_type type);
+
+#endif /* __SOC_IMX_TIMER_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2014 NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_TEGRA_EMC_H__
+#define __SOC_TEGRA_EMC_H__
+
+struct tegra_emc;
+
+int tegra_emc_prepare_timing_change(struct tegra_emc *emc,
+ unsigned long rate);
+void tegra_emc_complete_timing_change(struct tegra_emc *emc,
+ unsigned long rate);
+
+#endif /* __SOC_TEGRA_EMC_H__ */
};
u32 tegra_read_straps(void);
+u32 tegra_read_ram_code(void);
u32 tegra_read_chipid(void);
int tegra_fuse_readl(unsigned long offset, u32 *value);
unsigned int bit;
};
+struct tegra_mc_timing {
+ unsigned long rate;
+
+ u32 *emem_data;
+};
+
/* latency allowance */
struct tegra_mc_la {
unsigned int reg;
};
struct tegra_smmu_swgroup {
+ const char *name;
unsigned int swgroup;
unsigned int reg;
};
struct tegra_smmu *tegra_smmu_probe(struct device *dev,
const struct tegra_smmu_soc *soc,
struct tegra_mc *mc);
+void tegra_smmu_remove(struct tegra_smmu *smmu);
#else
static inline struct tegra_smmu *
tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc,
{
return NULL;
}
+
+static inline void tegra_smmu_remove(struct tegra_smmu *smmu)
+{
+}
#endif
struct tegra_mc_soc {
const struct tegra_mc_client *clients;
unsigned int num_clients;
- const unsigned int *emem_regs;
+ const unsigned long *emem_regs;
unsigned int num_emem_regs;
unsigned int num_address_bits;
const struct tegra_mc_soc *soc;
unsigned long tick;
+
+ struct tegra_mc_timing *timings;
+ unsigned int num_timings;
};
+void tegra_mc_write_emem_configuration(struct tegra_mc *mc, unsigned long rate);
+unsigned int tegra_mc_get_emem_device_count(struct tegra_mc *mc);
+
#endif /* __SOC_TEGRA_MC_H__ */
struct clk;
struct reset_control;
-void tegra_pmc_restart(enum reboot_mode mode, const char *cmd);
-
#ifdef CONFIG_PM_SLEEP
enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
#include <sound/core.h>
#include <sound/hdaudio.h>
+#define AC_AMP_FAKE_MUTE 0x10 /* fake mute bit set to amp verbs */
+
int snd_hdac_regmap_init(struct hdac_device *codec);
void snd_hdac_regmap_exit(struct hdac_device *codec);
int snd_hdac_regmap_add_vendor_verb(struct hdac_device *codec,
#define RADEON_INFO_CURRENT_GPU_SCLK 0x22
#define RADEON_INFO_CURRENT_GPU_MCLK 0x23
#define RADEON_INFO_READ_REG 0x24
+#define RADEON_INFO_VA_UNMAP_WORKING 0x25
struct drm_radeon_info {
uint32_t request;
* Extra serial register definitions for the internal UARTs
* in TI OMAP processors.
*/
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
#define UART_OMAP_MDR1 0x08 /* Mode definition register */
#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
#define UART_OMAP_SCR 0x10 /* Supplementary control register */
}
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
+/**
+ * irq_chip_enable_parent - Enable the parent interrupt (defaults to unmask if
+ * NULL)
+ * @data: Pointer to interrupt specific data
+ */
+void irq_chip_enable_parent(struct irq_data *data)
+{
+ data = data->parent_data;
+ if (data->chip->irq_enable)
+ data->chip->irq_enable(data);
+ else
+ data->chip->irq_unmask(data);
+}
+
+/**
+ * irq_chip_disable_parent - Disable the parent interrupt (defaults to mask if
+ * NULL)
+ * @data: Pointer to interrupt specific data
+ */
+void irq_chip_disable_parent(struct irq_data *data)
+{
+ data = data->parent_data;
+ if (data->chip->irq_disable)
+ data->chip->irq_disable(data);
+ else
+ data->chip->irq_mask(data);
+}
+
/**
* irq_chip_ack_parent - Acknowledge the parent interrupt
* @data: Pointer to interrupt specific data
int irq_map_generic_chip(struct irq_domain *d, unsigned int virq,
irq_hw_number_t hw_irq)
{
- struct irq_data *data = irq_get_irq_data(virq);
+ struct irq_data *data = irq_domain_get_irq_data(d, virq);
struct irq_domain_chip_generic *dgc = d->gc;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
else
data->mask = 1 << idx;
- irq_set_chip_and_handler(virq, chip, ct->handler);
- irq_set_chip_data(virq, gc);
+ irq_domain_set_info(d, virq, hw_irq, chip, gc, ct->handler, NULL, NULL);
irq_modify_status(virq, dgc->irq_flags_to_clear, dgc->irq_flags_to_set);
return 0;
}
return (irq_data && irq_data->domain == domain) ? irq_data : NULL;
}
+/**
+ * irq_domain_set_info - Set the complete data for a @virq in @domain
+ * @domain: Interrupt domain to match
+ * @virq: IRQ number
+ * @hwirq: The hardware interrupt number
+ * @chip: The associated interrupt chip
+ * @chip_data: The associated interrupt chip data
+ * @handler: The interrupt flow handler
+ * @handler_data: The interrupt flow handler data
+ * @handler_name: The interrupt handler name
+ */
+void irq_domain_set_info(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq, struct irq_chip *chip,
+ void *chip_data, irq_flow_handler_t handler,
+ void *handler_data, const char *handler_name)
+{
+ irq_set_chip_and_handler_name(virq, chip, handler, handler_name);
+ irq_set_chip_data(virq, chip_data);
+ irq_set_handler_data(virq, handler_data);
+}
+
static void irq_domain_check_hierarchy(struct irq_domain *domain)
{
}
list_del_rcu(&class->hash_entry);
list_del_rcu(&class->lock_entry);
- class->key = NULL;
+ RCU_INIT_POINTER(class->key, NULL);
+ RCU_INIT_POINTER(class->name, NULL);
}
static inline int within(const void *addr, void *start, unsigned long size)
static void seq_stats(struct seq_file *m, struct lock_stat_data *data)
{
- char name[39];
- struct lock_class *class;
+ struct lockdep_subclass_key *ckey;
struct lock_class_stats *stats;
+ struct lock_class *class;
+ const char *cname;
int i, namelen;
+ char name[39];
class = data->class;
stats = &data->stats;
if (class->subclass)
namelen -= 2;
- if (!class->name) {
+ rcu_read_lock_sched();
+ cname = rcu_dereference_sched(class->name);
+ ckey = rcu_dereference_sched(class->key);
+
+ if (!cname && !ckey) {
+ rcu_read_unlock_sched();
+ return;
+
+ } else if (!cname) {
char str[KSYM_NAME_LEN];
const char *key_name;
- key_name = __get_key_name(class->key, str);
+ key_name = __get_key_name(ckey, str);
snprintf(name, namelen, "%s", key_name);
} else {
- snprintf(name, namelen, "%s", class->name);
+ snprintf(name, namelen, "%s", cname);
}
+ rcu_read_unlock_sched();
+
namelen = strlen(name);
if (class->name_version > 1) {
snprintf(name+namelen, 3, "#%d", class->name_version);
}
for (; vma; vma = vma->vm_next) {
if (!vma_migratable(vma) || !vma_policy_mof(vma) ||
- is_vm_hugetlb_page(vma)) {
+ is_vm_hugetlb_page(vma) || (vma->vm_flags & VM_MIXEDMAP)) {
continue;
}
if (producer_fifo >= 0) {
struct sched_param param = {
- .sched_priority = consumer_fifo
+ .sched_priority = producer_fifo
};
sched_setscheduler(producer, SCHED_FIFO, ¶m);
} else
{
int n_normal_preds = 0, n_logical_preds = 0;
struct postfix_elt *elt;
+ int cnt = 0;
list_for_each_entry(elt, &ps->postfix, list) {
- if (elt->op == OP_NONE)
+ if (elt->op == OP_NONE) {
+ cnt++;
continue;
+ }
if (elt->op == OP_AND || elt->op == OP_OR) {
n_logical_preds++;
+ cnt--;
continue;
}
+ if (elt->op != OP_NOT)
+ cnt--;
n_normal_preds++;
+ WARN_ON_ONCE(cnt < 0);
}
- if (!n_normal_preds || n_logical_preds >= n_normal_preds) {
+ if (cnt != 1 || !n_normal_preds || n_logical_preds >= n_normal_preds) {
parse_error(ps, FILT_ERR_INVALID_FILTER, 0);
return -EINVAL;
}
int cpumask_next_and(int n, const struct cpumask *src1p,
const struct cpumask *src2p)
{
- struct cpumask tmp;
-
- if (cpumask_and(&tmp, src1p, src2p))
- return cpumask_next(n, &tmp);
- return nr_cpu_ids;
+ while ((n = cpumask_next(n, src1p)) < nr_cpu_ids)
+ if (cpumask_test_cpu(n, src2p))
+ break;
+ return n;
}
EXPORT_SYMBOL(cpumask_next_and);
************** MIPS *****************
***************************************/
#if defined(__mips__) && W_TYPE_SIZE == 32
-#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#if (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4)
#define umul_ppmm(w1, w0, u, v) \
do { \
UDItype __ll = (UDItype)(u) * (v); \
************** MIPS/64 **************
***************************************/
#if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64
-#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#if (__GNUC__ >= 5) || (__GNUC__ >= 4 && __GNUC_MINOR__ >= 4)
#define umul_ppmm(w1, w0, u, v) \
do { \
typedef unsigned int __ll_UTItype __attribute__((mode(TI))); \
#include <linux/random.h>
#include <linux/rhashtable.h>
#include <linux/err.h>
+#include <linux/export.h>
#define HASH_DEFAULT_SIZE 64UL
#define HASH_MIN_SIZE 4U
css_get_many(&memcg->css, batch);
if (batch > nr_pages)
refill_stock(memcg, batch - nr_pages);
+ if (!(gfp_mask & __GFP_WAIT))
+ goto done;
/*
* If the hierarchy is above the normal consumption range,
* make the charging task trim their excess contribution.
if (!mem_cgroup_is_root(memcg))
page_counter_uncharge(&memcg->memory, 1);
- /* XXX: caller holds IRQ-safe mapping->tree_lock */
- VM_BUG_ON(!irqs_disabled());
-
+ /* Caller disabled preemption with mapping->tree_lock */
mem_cgroup_charge_statistics(memcg, page, -1);
memcg_check_events(memcg, page);
}
* wait_table may be allocated from boot memory,
* here only free if it's allocated by vmalloc.
*/
- if (is_vmalloc_addr(zone->wait_table))
+ if (is_vmalloc_addr(zone->wait_table)) {
vfree(zone->wait_table);
+ zone->wait_table = NULL;
+ }
}
}
EXPORT_SYMBOL(try_offline_node);
struct file *file;
loff_t size = vma->vm_end - vma->vm_start;
- file = shmem_file_setup("dev/zero", size, vma->vm_flags);
+ /*
+ * Cloning a new file under mmap_sem leads to a lock ordering conflict
+ * between XFS directory reading and selinux: since this file is only
+ * accessible to the user through its mapping, use S_PRIVATE flag to
+ * bypass file security, in the same way as shmem_kernel_file_setup().
+ */
+ file = __shmem_file_setup("dev/zero", size, vma->vm_flags, S_PRIVATE);
if (IS_ERR(file))
return PTR_ERR(file);
static void destroy_handle_cache(struct zs_pool *pool)
{
- kmem_cache_destroy(pool->handle_cachep);
+ if (pool->handle_cachep)
+ kmem_cache_destroy(pool->handle_cachep);
}
static unsigned long alloc_handle(struct zs_pool *pool)
int err = 0;
if (ndm->ndm_flags & NTF_USE) {
+ local_bh_disable();
rcu_read_lock();
br_fdb_update(p->br, p, addr, vid, true);
rcu_read_unlock();
+ local_bh_enable();
} else {
spin_lock_bh(&p->br->hash_lock);
err = fdb_add_entry(p, addr, ndm->ndm_state,
struct net_bridge_port *p;
struct hlist_node *slot = NULL;
+ if (!hlist_unhashed(&port->rlist))
+ return;
+
hlist_for_each_entry(p, &br->router_list, rlist) {
if ((unsigned long) port >= (unsigned long) p)
break;
if (port->multicast_router != 1)
return;
- if (!hlist_unhashed(&port->rlist))
- goto timer;
-
br_multicast_add_router(br, port);
-timer:
mod_timer(&port->multicast_router_timer,
now + br->multicast_querier_interval);
}
int __dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
{
- if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
- if (skb_copy_ubufs(skb, GFP_ATOMIC)) {
- atomic_long_inc(&dev->rx_dropped);
- kfree_skb(skb);
- return NET_RX_DROP;
- }
- }
-
- if (unlikely(!is_skb_forwardable(dev, skb))) {
+ if (skb_orphan_frags(skb, GFP_ATOMIC) ||
+ unlikely(!is_skb_forwardable(dev, skb))) {
atomic_long_inc(&dev->rx_dropped);
kfree_skb(skb);
return NET_RX_DROP;
while (order) {
if (npages >= 1 << order) {
- page = alloc_pages(gfp_mask |
+ page = alloc_pages((gfp_mask & ~__GFP_WAIT) |
__GFP_COMP |
__GFP_NOWARN |
__GFP_NORETRY,
/*
* SOCK_MEMALLOC is allowed to ignore rmem limits to ensure forward
- * progress of swapping. However, if SOCK_MEMALLOC is cleared while
- * it has rmem allocations there is a risk that the user of the
- * socket cannot make forward progress due to exceeding the rmem
- * limits. By rights, sk_clear_memalloc() should only be called
- * on sockets being torn down but warn and reset the accounting if
- * that assumption breaks.
+ * progress of swapping. SOCK_MEMALLOC may be cleared while
+ * it has rmem allocations due to the last swapfile being deactivated
+ * but there is a risk that the socket is unusable due to exceeding
+ * the rmem limits. Reclaim the reserves and obey rmem limits again.
*/
- if (WARN_ON(sk->sk_forward_alloc))
- sk_mem_reclaim(sk);
+ sk_mem_reclaim(sk);
}
EXPORT_SYMBOL_GPL(sk_clear_memalloc);
pfrag->offset = 0;
if (SKB_FRAG_PAGE_ORDER) {
- pfrag->page = alloc_pages(gfp | __GFP_COMP |
+ pfrag->page = alloc_pages((gfp & ~__GFP_WAIT) | __GFP_COMP |
__GFP_NOWARN | __GFP_NORETRY,
SKB_FRAG_PAGE_ORDER);
if (likely(pfrag->page)) {
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/igmp.h>
+#include <linux/inetdevice.h>
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/timer.h>
struct sock *sk;
struct dst_entry *dst;
int dif = skb->dev->ifindex;
+ int ours;
/* validate the packet */
if (!pskb_may_pull(skb, skb_transport_offset(skb) + sizeof(struct udphdr)))
uh = udp_hdr(skb);
if (skb->pkt_type == PACKET_BROADCAST ||
- skb->pkt_type == PACKET_MULTICAST)
+ skb->pkt_type == PACKET_MULTICAST) {
+ struct in_device *in_dev = __in_dev_get_rcu(skb->dev);
+
+ if (!in_dev)
+ return;
+
+ ours = ip_check_mc_rcu(in_dev, iph->daddr, iph->saddr,
+ iph->protocol);
+ if (!ours)
+ return;
sk = __udp4_lib_mcast_demux_lookup(net, uh->dest, iph->daddr,
uh->source, iph->saddr, dif);
- else if (skb->pkt_type == PACKET_HOST)
+ } else if (skb->pkt_type == PACKET_HOST) {
sk = __udp4_lib_demux_lookup(net, uh->dest, iph->daddr,
uh->source, iph->saddr, dif);
- else
+ } else {
return;
+ }
if (!sk)
return;
free_percpu(idev->stats.ipv6);
}
+static void in6_dev_finish_destroy_rcu(struct rcu_head *head)
+{
+ struct inet6_dev *idev = container_of(head, struct inet6_dev, rcu);
+
+ snmp6_free_dev(idev);
+ kfree(idev);
+}
+
/* Nobody refers to this device, we may destroy it. */
void in6_dev_finish_destroy(struct inet6_dev *idev)
pr_warn("Freeing alive inet6 device %p\n", idev);
return;
}
- snmp6_free_dev(idev);
- kfree_rcu(idev, rcu);
+ call_rcu(&idev->rcu, in6_dev_finish_destroy_rcu);
}
EXPORT_SYMBOL(in6_dev_finish_destroy);
RCU_INIT_POINTER(dev->mpls_ptr, NULL);
- kfree(mdev);
+ kfree_rcu(mdev, rcu);
}
static int mpls_dev_notify(struct notifier_block *this, unsigned long event,
case NETDEV_UNREGISTER:
mpls_ifdown(dev);
break;
+ case NETDEV_CHANGENAME:
+ mdev = mpls_dev_get(dev);
+ if (mdev) {
+ int err;
+
+ mpls_dev_sysctl_unregister(mdev);
+ err = mpls_dev_sysctl_register(dev, mdev);
+ if (err)
+ return notifier_from_errno(err);
+ }
+ break;
}
return NOTIFY_OK;
}
int input_enabled;
struct ctl_table_header *sysctl;
+ struct rcu_head rcu;
};
struct sk_buff;
if (err)
goto error_master_upper_dev_unlink;
+ dev_disable_lro(netdev_vport->dev);
dev_set_promiscuity(netdev_vport->dev, 1);
netdev_vport->dev->priv_flags |= IFF_OVS_DATAPATH;
rtnl_unlock();
}
-/* Public interface to creat the association shared key.
+/* Public interface to create the association shared key.
* See code above for the algorithm.
*/
int sctp_auth_asoc_init_active_key(struct sctp_association *asoc, gfp_t gfp)
{
struct sctp_auth_bytes *secret;
struct sctp_shared_key *ep_key;
+ struct sctp_chunk *chunk;
/* If we don't support AUTH, or peer is not capable
* we don't need to do anything.
sctp_auth_key_put(asoc->asoc_shared_key);
asoc->asoc_shared_key = secret;
+ /* Update send queue in case any chunk already in there now
+ * needs authenticating
+ */
+ list_for_each_entry(chunk, &asoc->outqueue.out_chunk_list, list) {
+ if (sctp_auth_send_cid(chunk->chunk_hdr->type, asoc))
+ chunk->auth = 1;
+ }
+
return 0;
}
peer_node = tsk_peer_node(tsk);
if (tsk->probing_state == TIPC_CONN_PROBING) {
- /* Previous probe not answered -> self abort */
- skb = tipc_msg_create(TIPC_CRITICAL_IMPORTANCE,
- TIPC_CONN_MSG, SHORT_H_SIZE, 0,
- own_node, peer_node, tsk->portid,
- peer_port, TIPC_ERR_NO_PORT);
+ if (!sock_owned_by_user(sk)) {
+ sk->sk_socket->state = SS_DISCONNECTING;
+ tsk->connected = 0;
+ tipc_node_remove_conn(sock_net(sk), tsk_peer_node(tsk),
+ tsk_peer_port(tsk));
+ sk->sk_state_change(sk);
+ } else {
+ /* Try again later */
+ sk_reset_timer(sk, &sk->sk_timer, (HZ / 20));
+ }
+
} else {
skb = tipc_msg_create(CONN_MANAGER, CONN_PROBE,
INT_H_SIZE, 0, peer_node, own_node,
memcpy(bssid, wdev->current_bss->pub.bssid, ETH_ALEN);
wdev_unlock(wdev);
+ memset(&sinfo, 0, sizeof(sinfo));
+
if (rdev_get_station(rdev, dev, bssid, &sinfo))
return NULL;
}
# check for global initialisers.
- if ($line =~ /^\+(\s*$Type\s*$Ident\s*(?:\s+$Modifier))*\s*=\s*(0|NULL|false)\s*;/) {
+ if ($line =~ /^\+$Type\s*$Ident(?:\s+$Modifier)*\s*=\s*(?:0|NULL|false)\s*;/) {
if (ERROR("GLOBAL_INITIALISERS",
"do not initialise globals to 0 or NULL\n" .
$herecurr) &&
$fix) {
- $fixed[$fixlinenr] =~ s/($Type\s*$Ident\s*(?:\s+$Modifier))*\s*=\s*(0|NULL|false)\s*;/$1;/;
+ $fixed[$fixlinenr] =~ s/(^.$Type\s*$Ident(?:\s+$Modifier)*)\s*=\s*(0|NULL|false)\s*;/$1;/;
}
}
# check for static initialisers.
return hda_reg_read_stereo_amp(codec, reg, val);
if (verb == AC_VERB_GET_PROC_COEF)
return hda_reg_read_coef(codec, reg, val);
+ if ((verb & 0x700) == AC_VERB_SET_AMP_GAIN_MUTE)
+ reg &= ~AC_AMP_FAKE_MUTE;
+
err = snd_hdac_exec_verb(codec, reg, 0, val);
if (err < 0)
return err;
unsigned int verb;
int i, bytes, err;
+ if (codec->caps_overwriting)
+ return 0;
+
reg &= ~0x00080000U; /* drop GET bit */
reg |= (codec->addr << 28);
verb = get_verb(reg);
switch (verb & 0xf00) {
case AC_VERB_SET_AMP_GAIN_MUTE:
+ if ((reg & AC_AMP_FAKE_MUTE) && (val & AC_AMP_MUTE))
+ val = 0;
verb = AC_VERB_SET_AMP_GAIN_MUTE;
if (reg & AC_AMP_GET_LEFT)
verb |= AC_AMP_SET_LEFT >> 8;
config SND_SGI_O2
tristate "SGI O2 Audio"
depends on SGI_IP32
+ select SND_PCM
help
Sound support for the SGI O2 Workstation.
config SND_SGI_HAL2
tristate "SGI HAL2 Audio"
depends on SGI_HAS_HAL2
+ select SND_PCM
help
Sound support for the SGI Indy and Indigo2 Workstation.
get_wcaps_type(wcaps) != AC_WID_PIN)
return 0;
- parm = snd_hda_param_read(codec, nid, AC_PAR_DEVLIST_LEN);
+ parm = snd_hdac_read_parm_uncached(&codec->core, nid, AC_PAR_DEVLIST_LEN);
if (parm == -1 && codec->bus->rirb_error)
parm = 0;
return parm & AC_DEV_LIST_LEN_MASK;
}
EXPORT_SYMBOL_GPL(snd_hda_override_amp_caps);
+/**
+ * snd_hda_codec_amp_update - update the AMP mono value
+ * @codec: HD-audio codec
+ * @nid: NID to read the AMP value
+ * @ch: channel to update (0 or 1)
+ * @dir: #HDA_INPUT or #HDA_OUTPUT
+ * @idx: the index value (only for input direction)
+ * @mask: bit mask to set
+ * @val: the bits value to set
+ *
+ * Update the AMP values for the given channel, direction and index.
+ */
+int snd_hda_codec_amp_update(struct hda_codec *codec, hda_nid_t nid,
+ int ch, int dir, int idx, int mask, int val)
+{
+ unsigned int cmd = snd_hdac_regmap_encode_amp(nid, ch, dir, idx);
+
+ /* enable fake mute if no h/w mute but min=mute */
+ if ((query_amp_caps(codec, nid, dir) &
+ (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)) == AC_AMPCAP_MIN_MUTE)
+ cmd |= AC_AMP_FAKE_MUTE;
+ return snd_hdac_regmap_update_raw(&codec->core, cmd, mask, val);
+}
+EXPORT_SYMBOL_GPL(snd_hda_codec_amp_update);
+
/**
* snd_hda_codec_amp_stereo - update the AMP stereo values
* @codec: HD-audio codec
#define use_vga_switcheroo(chip) 0
#endif
+#define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \
+ ((pci)->device == 0x0c0c) || \
+ ((pci)->device == 0x0d0c) || \
+ ((pci)->device == 0x160c))
+
static char *driver_short_names[] = {
[AZX_DRIVER_ICH] = "HDA Intel",
[AZX_DRIVER_PCH] = "HDA Intel PCH",
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
#ifdef CONFIG_SND_HDA_I915
err = hda_i915_init(hda);
- if (err < 0)
- goto out_free;
+ if (err < 0) {
+ /* if the controller is bound only with HDMI/DP
+ * (for HSW and BDW), we need to abort the probe;
+ * for other chips, still continue probing as other
+ * codecs can be on the same link.
+ */
+ if (CONTROLLER_IN_GPU(pci))
+ goto out_free;
+ else
+ goto skip_i915;
+ }
err = hda_display_power(hda, true);
if (err < 0) {
dev_err(chip->card->dev,
#endif
}
+#ifdef CONFIG_SND_HDA_I915
+ skip_i915:
+#endif
err = azx_first_init(chip);
if (err < 0)
goto out_free;
/* lowlevel accessor with caching; use carefully */
#define snd_hda_codec_amp_read(codec, nid, ch, dir, idx) \
snd_hdac_regmap_get_amp(&(codec)->core, nid, ch, dir, idx)
-#define snd_hda_codec_amp_update(codec, nid, ch, dir, idx, mask, val) \
- snd_hdac_regmap_update_amp(&(codec)->core, nid, ch, dir, idx, mask, val)
+int snd_hda_codec_amp_update(struct hda_codec *codec, hda_nid_t nid,
+ int ch, int dir, int idx, int mask, int val);
int snd_hda_codec_amp_stereo(struct hda_codec *codec, hda_nid_t nid,
int dir, int idx, int mask, int val);
int snd_hda_codec_amp_init(struct hda_codec *codec, hda_nid_t nid, int ch,
ALC288_FIXUP_DELL_HEADSET_MODE,
ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC288_FIXUP_DELL_XPS_13_GPIO6,
+ ALC292_FIXUP_DELL_E7X,
+ ALC292_FIXUP_DISABLE_AAMIX,
};
static const struct hda_fixup alc269_fixups[] = {
.chained = true,
.chain_id = ALC288_FIXUP_DELL1_MIC_NO_PRESENCE
},
+ [ALC292_FIXUP_DISABLE_AAMIX] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc_fixup_disable_aamix,
+ },
+ [ALC292_FIXUP_DELL_E7X] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc_fixup_dell_xps13,
+ .chained = true,
+ .chain_id = ALC292_FIXUP_DISABLE_AAMIX
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572),
SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+ SND_PCI_QUIRK(0x1028, 0x05ca, "Dell Latitude E7240", ALC292_FIXUP_DELL_E7X),
+ SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER),
SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS_HSJACK),
SND_PCI_QUIRK(0x1028, 0x064a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x064b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x0665, "Dell XPS 13", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x06c7, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x06d9, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x06da, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
spec = codec->spec;
spec->gen.shared_mic_vref_pin = 0x18;
- if (codec->core.vendor_id != 0x10ec0292)
- codec->power_save_node = 1;
+ codec->power_save_node = 1;
snd_hda_pick_fixup(codec, alc269_fixup_models,
alc269_fixup_tbl, alc269_fixups);
STAC_HP_ENVY_BASS,
STAC_HP_BNB13_EQ,
STAC_HP_ENVY_TS_BASS,
+ STAC_HP_ENVY_TS_DAC_BIND,
STAC_92HD83XXX_GPIO10_EAPD,
STAC_92HD83XXX_MODELS
};
spec->eapd_switch = 0;
}
+static void hp_envy_ts_fixup_dac_bind(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ static hda_nid_t preferred_pairs[] = {
+ 0xd, 0x13,
+ 0
+ };
+
+ if (action != HDA_FIXUP_ACT_PRE_PROBE)
+ return;
+
+ spec->gen.preferred_dacs = preferred_pairs;
+}
+
static const struct hda_verb hp_bnb13_eq_verbs[] = {
/* 44.1KHz base */
{ 0x22, 0x7A6, 0x3E },
{}
},
},
+ [STAC_HP_ENVY_TS_DAC_BIND] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = hp_envy_ts_fixup_dac_bind,
+ .chained = true,
+ .chain_id = STAC_HP_ENVY_TS_BASS,
+ },
[STAC_92HD83XXX_GPIO10_EAPD] = {
.type = HDA_FIXUP_FUNC,
.v.func = stac92hd83xxx_fixup_gpio10_eapd,
"HP bNB13", STAC_HP_BNB13_EQ),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x190e,
"HP ENVY TS", STAC_HP_ENVY_TS_BASS),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1967,
+ "HP ENVY TS", STAC_HP_ENVY_TS_DAC_BIND),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1940,
"HP bNB13", STAC_HP_BNB13_EQ),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1941,
if (fp->altsetting == 2)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
- /* DIYINHK DSD DXD 384kHz USB to I2S/DSD */
- case USB_ID(0x20b1, 0x2009):
+
+ case USB_ID(0x20b1, 0x2009): /* DIYINHK DSD DXD 384kHz USB to I2S/DSD */
+ case USB_ID(0x20b1, 0x2023): /* JLsounds I2SoverUSB */
if (fp->altsetting == 3)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
projects / firefly-linux-kernel-4.4.55.git / commitdiff