select_timeout:
if (dev->rx_fan_input_inuse) {
- dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+ dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
/* Fan input doesn't support timeouts, it just ends the
input with a maximum sample */
dev->rdev->min_timeout = dev->rdev->max_timeout =
- MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
+ US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
ENE_FW_SAMPLE_PERIOD_FAN);
} else {
- dev->rdev->rx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->rx_resolution = US_TO_NS(sample_period);
/* Theoreticly timeout is unlimited, but we cap it
* because it was seen that on one device, it
* would stop sending spaces after around 250 msec.
* Besides, this is close to 2^32 anyway and timeout is u32.
*/
- dev->rdev->min_timeout = MS_TO_NS(127 * sample_period);
- dev->rdev->max_timeout = MS_TO_NS(200000);
+ dev->rdev->min_timeout = US_TO_NS(127 * sample_period);
+ dev->rdev->max_timeout = US_TO_NS(200000);
}
if (dev->hw_learning_and_tx_capable)
- dev->rdev->tx_resolution = MS_TO_NS(sample_period);
+ dev->rdev->tx_resolution = US_TO_NS(sample_period);
if (dev->rdev->timeout > dev->rdev->max_timeout)
dev->rdev->timeout = dev->rdev->max_timeout;
dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
- ev.duration = MS_TO_NS(hw_sample);
+ ev.duration = US_TO_NS(hw_sample);
ev.pulse = pulse;
ir_raw_event_store_with_filter(dev->rdev, &ev);
}
dev->learning_mode_enabled = learning_mode_force;
/* Set reasonable default timeout */
- dev->rdev->timeout = MS_TO_NS(150000);
+ dev->rdev->timeout = US_TO_NS(150000);
}
/* Upload all hardware settings at once. Used at load and resume time */
#define USB_BUFLEN 32 /* USB reception buffer length */
#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
-#define MS_TO_NS(msec) ((msec) * 1000)
/* MCE constants */
#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
switch (ir->buf_in[index]) {
/* 2-byte return value commands */
case MCE_CMD_S_TIMEOUT:
- ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+ ir->rc->timeout = MS_TO_US((hi << 8 | lo) / 2);
break;
/* 1-byte return value commands */
ir->rem--;
rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
- * MS_TO_NS(MCE_TIME_UNIT);
+ * MS_TO_US(MCE_TIME_UNIT);
dev_dbg(ir->dev, "Storing %s with duration %d\n",
rawir.pulse ? "pulse" : "space",
rc->priv = ir;
rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protos = RC_TYPE_ALL;
- rc->timeout = MS_TO_NS(1000);
+ rc->timeout = MS_TO_US(1000);
if (!ir->flags.no_tx) {
rc->s_tx_mask = mceusb_set_tx_mask;
rc->s_tx_carrier = mceusb_set_tx_carrier;
}
#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
+#define US_TO_NS(usec) ((usec) * 1000)
+#define MS_TO_US(msec) ((msec) * 1000)
+#define MS_TO_NS(msec) ((msec) * 1000 * 1000)
void ir_raw_event_handle(struct rc_dev *dev);
int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);