return LowerCallTo(CLI);
}
-/// SoftenSetCCOperands - Soften the operands of a comparison. This code is
-/// shared among BR_CC, SELECT_CC, and SETCC handlers.
+/// Soften the operands of a comparison. This code is shared among BR_CC,
+/// SELECT_CC, and SETCC handlers.
void TargetLowering::softenSetCCOperands(SelectionDAG &DAG, EVT VT,
SDValue &NewLHS, SDValue &NewRHS,
ISD::CondCode &CCCode,
}
}
-/// getJumpTableEncoding - Return the entry encoding for a jump table in the
-/// current function. The returned value is a member of the
-/// MachineJumpTableInfo::JTEntryKind enum.
+/// Return the entry encoding for a jump table in the current function. The
+/// returned value is a member of the MachineJumpTableInfo::JTEntryKind enum.
unsigned TargetLowering::getJumpTableEncoding() const {
// In non-pic modes, just use the address of a block.
if (getTargetMachine().getRelocationModel() != Reloc::PIC_)
return Table;
}
-/// getPICJumpTableRelocBaseExpr - This returns the relocation base for the
-/// given PIC jumptable, the same as getPICJumpTableRelocBase, but as an
-/// MCExpr.
+/// This returns the relocation base for the given PIC jumptable, the same as
+/// getPICJumpTableRelocBase, but as an MCExpr.
const MCExpr *
TargetLowering::getPICJumpTableRelocBaseExpr(const MachineFunction *MF,
unsigned JTI,MCContext &Ctx) const{
// Optimization Methods
//===----------------------------------------------------------------------===//
-/// ShrinkDemandedConstant - Check to see if the specified operand of the
-/// specified instruction is a constant integer. If so, check to see if there
-/// are any bits set in the constant that are not demanded. If so, shrink the
-/// constant and return true.
+/// Check to see if the specified operand of the specified instruction is a
+/// constant integer. If so, check to see if there are any bits set in the
+/// constant that are not demanded. If so, shrink the constant and return true.
bool TargetLowering::TargetLoweringOpt::ShrinkDemandedConstant(SDValue Op,
const APInt &Demanded) {
SDLoc dl(Op);
return false;
}
-/// ShrinkDemandedOp - Convert x+y to (VT)((SmallVT)x+(SmallVT)y) if the
-/// casts are free. This uses isZExtFree and ZERO_EXTEND for the widening
-/// cast, but it could be generalized for targets with other types of
-/// implicit widening casts.
+/// Convert x+y to (VT)((SmallVT)x+(SmallVT)y) if the casts are free.
+/// This uses isZExtFree and ZERO_EXTEND for the widening cast, but it could be
+/// generalized for targets with other types of implicit widening casts.
bool
TargetLowering::TargetLoweringOpt::ShrinkDemandedOp(SDValue Op,
unsigned BitWidth,
return false;
}
-/// SimplifyDemandedBits - Look at Op. At this point, we know that only the
-/// DemandedMask bits of the result of Op are ever used downstream. If we can
-/// use this information to simplify Op, create a new simplified DAG node and
-/// return true, returning the original and new nodes in Old and New. Otherwise,
-/// analyze the expression and return a mask of KnownOne and KnownZero bits for
-/// the expression (used to simplify the caller). The KnownZero/One bits may
-/// only be accurate for those bits in the DemandedMask.
+/// Look at Op. At this point, we know that only the DemandedMask bits of the
+/// result of Op are ever used downstream. If we can use this information to
+/// simplify Op, create a new simplified DAG node and return true, returning the
+/// original and new nodes in Old and New. Otherwise, analyze the expression and
+/// return a mask of KnownOne and KnownZero bits for the expression (used to
+/// simplify the caller). The KnownZero/One bits may only be accurate for those
+/// bits in the DemandedMask.
bool TargetLowering::SimplifyDemandedBits(SDValue Op,
const APInt &DemandedMask,
APInt &KnownZero,
return false;
}
-/// computeKnownBitsForTargetNode - Determine which of the bits specified
-/// in Mask are known to be either zero or one and return them in the
-/// KnownZero/KnownOne bitsets.
+/// Determine which of the bits specified in Mask are known to be either zero or
+/// one and return them in the KnownZero/KnownOne bitsets.
void TargetLowering::computeKnownBitsForTargetNode(const SDValue Op,
APInt &KnownZero,
APInt &KnownOne,
KnownZero = KnownOne = APInt(KnownOne.getBitWidth(), 0);
}
-/// ComputeNumSignBitsForTargetNode - This method can be implemented by
-/// targets that want to expose additional information about sign bits to the
-/// DAG Combiner.
+/// This method can be implemented by targets that want to expose additional
+/// information about sign bits to the DAG Combiner.
unsigned TargetLowering::ComputeNumSignBitsForTargetNode(SDValue Op,
const SelectionDAG &,
unsigned Depth) const {
return 1;
}
-/// ValueHasExactlyOneBitSet - Test if the given value is known to have exactly
-/// one bit set. This differs from computeKnownBits in that it doesn't need to
-/// determine which bit is set.
-///
+/// Test if the given value is known to have exactly one bit set. This differs
+/// from computeKnownBits in that it doesn't need to determine which bit is set.
static bool ValueHasExactlyOneBitSet(SDValue Val, const SelectionDAG &DAG) {
// A left-shift of a constant one will have exactly one bit set, because
// shifting the bit off the end is undefined.
return CN->isNullValue();
}
-/// SimplifySetCC - Try to simplify a setcc built with the specified operands
-/// and cc. If it is unable to simplify it, return a null SDValue.
+/// Try to simplify a setcc built with the specified operands and cc. If it is
+/// unable to simplify it, return a null SDValue.
SDValue
TargetLowering::SimplifySetCC(EVT VT, SDValue N0, SDValue N1,
ISD::CondCode Cond, bool foldBooleans,
return SDValue();
}
-/// isGAPlusOffset - Returns true (and the GlobalValue and the offset) if the
-/// node is a GlobalAddress + offset.
+/// Returns true (and the GlobalValue and the offset) if the node is a
+/// GlobalAddress + offset.
bool TargetLowering::isGAPlusOffset(SDNode *N, const GlobalValue *&GA,
int64_t &Offset) const {
if (auto *GASD = dyn_cast<GlobalAddressSDNode>(N)) {
return C_Unknown;
}
-/// LowerXConstraint - try to replace an X constraint, which matches anything,
-/// with another that has more specific requirements based on the type of the
-/// corresponding operand.
+/// Try to replace an X constraint, which matches anything, with another that
+/// has more specific requirements based on the type of the corresponding
+/// operand.
const char *TargetLowering::LowerXConstraint(EVT ConstraintVT) const{
if (ConstraintVT.isInteger())
return "r";
return nullptr;
}
-/// LowerAsmOperandForConstraint - Lower the specified operand into the Ops
-/// vector. If it is invalid, don't add anything to Ops.
+/// Lower the specified operand into the Ops vector.
+/// If it is invalid, don't add anything to Ops.
void TargetLowering::LowerAsmOperandForConstraint(SDValue Op,
std::string &Constraint,
std::vector<SDValue> &Ops,
//===----------------------------------------------------------------------===//
// Constraint Selection.
-/// isMatchingInputConstraint - Return true of this is an input operand that is
-/// a matching constraint like "4".
+/// Return true of this is an input operand that is a matching constraint like
+/// "4".
bool TargetLowering::AsmOperandInfo::isMatchingInputConstraint() const {
assert(!ConstraintCode.empty() && "No known constraint!");
return isdigit(static_cast<unsigned char>(ConstraintCode[0]));
}
-/// getMatchedOperand - If this is an input matching constraint, this method
-/// returns the output operand it matches.
+/// If this is an input matching constraint, this method returns the output
+/// operand it matches.
unsigned TargetLowering::AsmOperandInfo::getMatchedOperand() const {
assert(!ConstraintCode.empty() && "No known constraint!");
return atoi(ConstraintCode.c_str());
}
-/// ParseConstraints - Split up the constraint string from the inline
-/// assembly value into the specific constraints and their prefixes,
-/// and also tie in the associated operand values.
+/// Split up the constraint string from the inline assembly value into the
+/// specific constraints and their prefixes, and also tie in the associated
+/// operand values.
/// If this returns an empty vector, and if the constraint string itself
/// isn't empty, there was an error parsing.
TargetLowering::AsmOperandInfoVector
TargetLowering::ParseConstraints(const DataLayout &DL,
const TargetRegisterInfo *TRI,
ImmutableCallSite CS) const {
- /// ConstraintOperands - Information about all of the constraints.
+ /// Information about all of the constraints.
AsmOperandInfoVector ConstraintOperands;
const InlineAsm *IA = cast<InlineAsm>(CS.getCalledValue());
unsigned maCount = 0; // Largest number of multiple alternative constraints.
return ConstraintOperands;
}
-/// getConstraintGenerality - Return an integer indicating how general CT
-/// is.
+/// Return an integer indicating how general CT is.
static unsigned getConstraintGenerality(TargetLowering::ConstraintType CT) {
switch (CT) {
case TargetLowering::C_Other:
return weight;
}
-/// ChooseConstraint - If there are multiple different constraints that we
-/// could pick for this operand (e.g. "imr") try to pick the 'best' one.
+/// If there are multiple different constraints that we could pick for this
+/// operand (e.g. "imr") try to pick the 'best' one.
/// This is somewhat tricky: constraints fall into four classes:
/// Other -> immediates and magic values
/// Register -> one specific register
OpInfo.ConstraintType = BestType;
}
-/// ComputeConstraintToUse - Determines the constraint code and constraint
-/// type to use for the specific AsmOperandInfo, setting
-/// OpInfo.ConstraintCode and OpInfo.ConstraintType.
+/// Determines the constraint code and constraint type to use for the specific
+/// AsmOperandInfo, setting OpInfo.ConstraintCode and OpInfo.ConstraintType.
void TargetLowering::ComputeConstraintToUse(AsmOperandInfo &OpInfo,
SDValue Op,
SelectionDAG *DAG) const {
projects / oota-llvm.git / commitdiff