* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Remove redundant non-NUMA topology functions
x86: early_printk: Protect against using the same device twice
x86: Reduce verbosity of "PAT enabled" kernel message
x86: Reduce verbosity of "TSC is reliable" message
x86: mce: Use safer ways to access MCE registers
x86: mce, inject: Use real inject-msg in raise_local
x86: mce: Fix thermal throttling message storm
x86: mce: Clean up thermal throttling state tracking code
x86: split NX setup into separate file to limit unstack-protected code
xen: check EFER for NX before setting up GDT mapping
x86: Cleanup linker script using new linker script macros.
x86: Use section .data.page_aligned for the idt_table.
x86: convert to use __HEAD and HEAD_TEXT macros.
x86: convert compressed loader to use __HEAD and HEAD_TEXT macros.
x86: fix fragile computation of vsyscall address
--- /dev/null
+ARM TCM (Tightly-Coupled Memory) handling in Linux
+----
+Written by Linus Walleij <linus.walleij@stericsson.com>
+
+Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory).
+This is usually just a few (4-64) KiB of RAM inside the ARM
+processor.
+
+Due to being embedded inside the CPU The TCM has a
+Harvard-architecture, so there is an ITCM (instruction TCM)
+and a DTCM (data TCM). The DTCM can not contain any
+instructions, but the ITCM can actually contain data.
+The size of DTCM or ITCM is minimum 4KiB so the typical
+minimum configuration is 4KiB ITCM and 4KiB DTCM.
+
+ARM CPU:s have special registers to read out status, physical
+location and size of TCM memories. arch/arm/include/asm/cputype.h
+defines a CPUID_TCM register that you can read out from the
+system control coprocessor. Documentation from ARM can be found
+at http://infocenter.arm.com, search for "TCM Status Register"
+to see documents for all CPUs. Reading this register you can
+determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
+machine.
+
+There is further a TCM region register (search for "TCM Region
+Registers" at the ARM site) that can report and modify the location
+size of TCM memories at runtime. This is used to read out and modify
+TCM location and size. Notice that this is not a MMU table: you
+actually move the physical location of the TCM around. At the
+place you put it, it will mask any underlying RAM from the
+CPU so it is usually wise not to overlap any physical RAM with
+the TCM. The TCM memory exists totally outside the MMU and will
+override any MMU mappings.
+
+Code executing inside the ITCM does not "see" any MMU mappings
+and e.g. register accesses must be made to physical addresses.
+
+TCM is used for a few things:
+
+- FIQ and other interrupt handlers that need deterministic
+ timing and cannot wait for cache misses.
+
+- Idle loops where all external RAM is set to self-refresh
+ retention mode, so only on-chip RAM is accessible by
+ the CPU and then we hang inside ITCM waiting for an
+ interrupt.
+
+- Other operations which implies shutting off or reconfiguring
+ the external RAM controller.
+
+There is an interface for using TCM on the ARM architecture
+in <asm/tcm.h>. Using this interface it is possible to:
+
+- Define the physical address and size of ITCM and DTCM.
+
+- Tag functions to be compiled into ITCM.
+
+- Tag data and constants to be allocated to DTCM and ITCM.
+
+- Have the remaining TCM RAM added to a special
+ allocation pool with gen_pool_create() and gen_pool_add()
+ and provice tcm_alloc() and tcm_free() for this
+ memory. Such a heap is great for things like saving
+ device state when shutting off device power domains.
+
+A machine that has TCM memory shall select HAVE_TCM in
+arch/arm/Kconfig for itself, and then the
+rest of the functionality will depend on the physical
+location and size of ITCM and DTCM to be defined in
+mach/memory.h for the machine. Code that needs to use
+TCM shall #include <asm/tcm.h> If the TCM is not located
+at the place given in memory.h it will be moved using
+the TCM Region registers.
+
+Functions to go into itcm can be tagged like this:
+int __tcmfunc foo(int bar);
+
+Variables to go into dtcm can be tagged like this:
+int __tcmdata foo;
+
+Constants can be tagged like this:
+int __tcmconst foo;
+
+To put assembler into TCM just use
+.section ".tcm.text" or .section ".tcm.data"
+respectively.
+
+Example code:
+
+#include <asm/tcm.h>
+
+/* Uninitialized data */
+static u32 __tcmdata tcmvar;
+/* Initialized data */
+static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+/* Constant */
+static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+
+static void __tcmlocalfunc tcm_to_tcm(void)
+{
+ int i;
+ for (i = 0; i < 100; i++)
+ tcmvar ++;
+}
+
+static void __tcmfunc hello_tcm(void)
+{
+ /* Some abstract code that runs in ITCM */
+ int i;
+ for (i = 0; i < 100; i++) {
+ tcmvar ++;
+ }
+ tcm_to_tcm();
+}
+
+static void __init test_tcm(void)
+{
+ u32 *tcmem;
+ int i;
+
+ hello_tcm();
+ printk("Hello TCM executed from ITCM RAM\n");
+
+ printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
+ tcmvar = 0xDEADBEEFU;
+ printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
+
+ printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
+
+ printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
+
+ /* Allocate some TCM memory from the pool */
+ tcmem = tcm_alloc(20);
+ if (tcmem) {
+ printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
+ tcmem[0] = 0xDEADBEEFU;
+ tcmem[1] = 0x2BADBABEU;
+ tcmem[2] = 0xCAFEBABEU;
+ tcmem[3] = 0xDEADBEEFU;
+ tcmem[4] = 0x2BADBABEU;
+ for (i = 0; i < 5; i++)
+ printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
+ tcm_free(tcmem, 20);
+ }
+}
*/
#include <stdio.h>
-#include <string.h>
#define EXAMPLES 6
# echo 0 > tasks
+2.3 Mounting hierarchies by name
+--------------------------------
+
+Passing the name=<x> option when mounting a cgroups hierarchy
+associates the given name with the hierarchy. This can be used when
+mounting a pre-existing hierarchy, in order to refer to it by name
+rather than by its set of active subsystems. Each hierarchy is either
+nameless, or has a unique name.
+
+The name should match [\w.-]+
+
+When passing a name=<x> option for a new hierarchy, you need to
+specify subsystems manually; the legacy behaviour of mounting all
+subsystems when none are explicitly specified is not supported when
+you give a subsystem a name.
+
+The name of the subsystem appears as part of the hierarchy description
+in /proc/mounts and /proc/<pid>/cgroups.
+
+
3. Kernel API
=============
called multiple times against a cgroup.
int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct task_struct *task)
+ struct task_struct *task, bool threadgroup)
(cgroup_mutex held by caller)
Called prior to moving a task into a cgroup; if the subsystem
task is passed, then a successful result indicates that *any*
unspecified task can be moved into the cgroup. Note that this isn't
called on a fork. If this method returns 0 (success) then this should
-remain valid while the caller holds cgroup_mutex.
+remain valid while the caller holds cgroup_mutex. If threadgroup is
+true, then a successful result indicates that all threads in the given
+thread's threadgroup can be moved together.
void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cgrp, struct task_struct *task)
+ struct cgroup *old_cgrp, struct task_struct *task,
+ bool threadgroup)
(cgroup_mutex held by caller)
Called after the task has been attached to the cgroup, to allow any
post-attachment activity that requires memory allocations or blocking.
+If threadgroup is true, the subsystem should take care of all threads
+in the specified thread's threadgroup. Currently does not support any
+subsystem that might need the old_cgrp for every thread in the group.
void fork(struct cgroup_subsy *ss, struct task_struct *task)
pages that are selected for reclaiming come from the per cgroup LRU
list.
+NOTE: Reclaim does not work for the root cgroup, since we cannot set any
+limits on the root cgroup.
+
2. Locking
The memory controller uses the following hierarchy
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes.
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
+NOTE: We cannot set limits on the root cgroup any more.
# cat /cgroups/0/memory.limit_in_bytes
4194304
NOTE2: This feature can be enabled/disabled per subtree.
-7. TODO
+7. Soft limits
+
+Soft limits allow for greater sharing of memory. The idea behind soft limits
+is to allow control groups to use as much of the memory as needed, provided
+
+a. There is no memory contention
+b. They do not exceed their hard limit
+
+When the system detects memory contention or low memory control groups
+are pushed back to their soft limits. If the soft limit of each control
+group is very high, they are pushed back as much as possible to make
+sure that one control group does not starve the others of memory.
+
+Please note that soft limits is a best effort feature, it comes with
+no guarantees, but it does its best to make sure that when memory is
+heavily contended for, memory is allocated based on the soft limit
+hints/setup. Currently soft limit based reclaim is setup such that
+it gets invoked from balance_pgdat (kswapd).
+
+7.1 Interface
+
+Soft limits can be setup by using the following commands (in this example we
+assume a soft limit of 256 megabytes)
+
+# echo 256M > memory.soft_limit_in_bytes
+
+If we want to change this to 1G, we can at any time use
+
+# echo 1G > memory.soft_limit_in_bytes
+
+NOTE1: Soft limits take effect over a long period of time, since they involve
+ reclaiming memory for balancing between memory cgroups
+NOTE2: It is recommended to set the soft limit always below the hard limit,
+ otherwise the hard limit will take precedence.
+
+8. TODO
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first
3.1 General format of the API:
struct dma_async_tx_descriptor *
-async_<operation>(<op specific parameters>,
- enum async_tx_flags flags,
- struct dma_async_tx_descriptor *dependency,
- dma_async_tx_callback callback_routine,
- void *callback_parameter);
+async_<operation>(<op specific parameters>, struct async_submit ctl *submit)
3.2 Supported operations:
-memcpy - memory copy between a source and a destination buffer
-memset - fill a destination buffer with a byte value
-xor - xor a series of source buffers and write the result to a
- destination buffer
-xor_zero_sum - xor a series of source buffers and set a flag if the
- result is zero. The implementation attempts to prevent
- writes to memory
+memcpy - memory copy between a source and a destination buffer
+memset - fill a destination buffer with a byte value
+xor - xor a series of source buffers and write the result to a
+ destination buffer
+xor_val - xor a series of source buffers and set a flag if the
+ result is zero. The implementation attempts to prevent
+ writes to memory
+pq - generate the p+q (raid6 syndrome) from a series of source buffers
+pq_val - validate that a p and or q buffer are in sync with a given series of
+ sources
+datap - (raid6_datap_recov) recover a raid6 data block and the p block
+ from the given sources
+2data - (raid6_2data_recov) recover 2 raid6 data blocks from the given
+ sources
3.3 Descriptor management:
The return value is non-NULL and points to a 'descriptor' when the operation
recycle (or free) the descriptor. A descriptor can be acked by one of the
following methods:
1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted
-2/ setting the ASYNC_TX_DEP_ACK flag to acknowledge the parent
- descriptor of a new operation.
+2/ submitting an unacknowledged descriptor as a dependency to another
+ async_tx call will implicitly set the acknowledged state.
3/ calling async_tx_ack() on the descriptor.
3.4 When does the operation execute?
Perform a xor->copy->xor operation where each operation depends on the
result from the previous operation:
-void complete_xor_copy_xor(void *param)
+void callback(void *param)
{
- printk("complete\n");
+ struct completion *cmp = param;
+
+ complete(cmp);
}
-int run_xor_copy_xor(struct page **xor_srcs,
- int xor_src_cnt,
- struct page *xor_dest,
- size_t xor_len,
- struct page *copy_src,
- struct page *copy_dest,
- size_t copy_len)
+void run_xor_copy_xor(struct page **xor_srcs,
+ int xor_src_cnt,
+ struct page *xor_dest,
+ size_t xor_len,
+ struct page *copy_src,
+ struct page *copy_dest,
+ size_t copy_len)
{
struct dma_async_tx_descriptor *tx;
+ addr_conv_t addr_conv[xor_src_cnt];
+ struct async_submit_ctl submit;
+ addr_conv_t addr_conv[NDISKS];
+ struct completion cmp;
+
+ init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL,
+ addr_conv);
+ tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit)
- tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
- ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL);
- tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len,
- ASYNC_TX_DEP_ACK, tx, NULL, NULL);
- tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
- ASYNC_TX_XOR_DROP_DST | ASYNC_TX_DEP_ACK | ASYNC_TX_ACK,
- tx, complete_xor_copy_xor, NULL);
+ submit->depend_tx = tx;
+ tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, &submit);
+
+ init_completion(&cmp);
+ init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST | ASYNC_TX_ACK, tx,
+ callback, &cmp, addr_conv);
+ tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit);
async_tx_issue_pending_all();
+
+ wait_for_completion(&cmp);
}
See include/linux/async_tx.h for more information on the flags. See the
---------------------------
-What: fscher and fscpos drivers
-When: June 2009
-Why: Deprecated by the new fschmd driver.
-Who: Hans de Goede <hdegoede@redhat.com>
- Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: sysfs ui for changing p4-clockmod parameters
When: September 2009
Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
Other applications are described in the following papers:
* XCPU & Clustering
- http://www.xcpu.org/xcpu-talk.pdf
+ http://xcpu.org/papers/xcpu-talk.pdf
* KVMFS: control file system for KVM
- http://www.xcpu.org/kvmfs.pdf
- * CellFS: A New ProgrammingModel for the Cell BE
- http://www.xcpu.org/cellfs-talk.pdf
+ http://xcpu.org/papers/kvmfs.pdf
+ * CellFS: A New Programming Model for the Cell BE
+ http://xcpu.org/papers/cellfs-talk.pdf
* PROSE I/O: Using 9p to enable Application Partitions
http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf
(see rfdno and wfdno)
virtio - connect to the next virtio channel available
(from lguest or KVM with trans_virtio module)
+ rdma - connect to a specified RDMA channel
uname=name user name to attempt mount as on the remote server. The
server may override or ignore this value. Certain user
cache=mode specifies a caching policy. By default, no caches are used.
loose = no attempts are made at consistency,
intended for exclusive, read-only mounts
+ fscache = use FS-Cache for a persistent, read-only
+ cache backend.
debug=n specifies debug level. The debug level is a bitmask.
- 0x01 = display verbose error messages
- 0x02 = developer debug (DEBUG_CURRENT)
- 0x04 = display 9p trace
- 0x08 = display VFS trace
- 0x10 = display Marshalling debug
- 0x20 = display RPC debug
- 0x40 = display transport debug
- 0x80 = display allocation debug
+ 0x01 = display verbose error messages
+ 0x02 = developer debug (DEBUG_CURRENT)
+ 0x04 = display 9p trace
+ 0x08 = display VFS trace
+ 0x10 = display Marshalling debug
+ 0x20 = display RPC debug
+ 0x40 = display transport debug
+ 0x80 = display allocation debug
+ 0x100 = display protocol message debug
+ 0x200 = display Fid debug
+ 0x400 = display packet debug
+ 0x800 = display fscache tracing debug
rfdno=n the file descriptor for reading with trans=fd
any = v9fs does single attach and performs all
operations as one user
+ cachetag cache tag to use the specified persistent cache.
+ cache tags for existing cache sessions can be listed at
+ /sys/fs/9p/caches. (applies only to cache=fscache)
+
RESOURCES
=========
A Linux version of the 9p server is now maintained under the npfs project
on sourceforge (http://sourceforge.net/projects/npfs). The currently
maintained version is the single-threaded version of the server (named spfs)
-available from the same CVS repository.
+available from the same SVN repository.
There are user and developer mailing lists available through the v9fs project
on sourceforge (http://sourceforge.net/projects/v9fs).
A stand-alone version of the module (which should build for any 2.6 kernel)
is available via (http://github.com/ericvh/9p-sac/tree/master)
-News and other information is maintained on SWiK (http://swik.net/v9fs).
+News and other information is maintained on SWiK (http://swik.net/v9fs)
+and the Wiki (http://sf.net/apps/mediawiki/v9fs/index.php).
Bug reports may be issued through the kernel.org bugzilla
(http://bugzilla.kernel.org)
Contents:
1) Overview
2) Features
- 3) smount command
+ 3) Setting mount states
4) Use-case
5) Detailed semantics
6) Quiz
Here is an example:
- Lets say /mnt has a mount that is shared.
+ Let's say /mnt has a mount that is shared.
mount --make-shared /mnt
- note: mount command does not yet support the --make-shared flag.
- I have included a small C program which does the same by executing
- 'smount /mnt shared'
+ Note: mount(8) command now supports the --make-shared flag,
+ so the sample 'smount' program is no longer needed and has been
+ removed.
- #mount --bind /mnt /tmp
+ # mount --bind /mnt /tmp
The above command replicates the mount at /mnt to the mountpoint /tmp
and the contents of both the mounts remain identical.
#ls /tmp
a b c
- Now lets say we mount a device at /tmp/a
- #mount /dev/sd0 /tmp/a
+ Now let's say we mount a device at /tmp/a
+ # mount /dev/sd0 /tmp/a
#ls /tmp/a
t1 t2 t2
Here is an example:
- Lets say /mnt has a mount which is shared.
- #mount --make-shared /mnt
+ Let's say /mnt has a mount which is shared.
+ # mount --make-shared /mnt
- Lets bind mount /mnt to /tmp
- #mount --bind /mnt /tmp
+ Let's bind mount /mnt to /tmp
+ # mount --bind /mnt /tmp
the new mount at /tmp becomes a shared mount and it is a replica of
the mount at /mnt.
- Now lets make the mount at /tmp; a slave of /mnt
- #mount --make-slave /tmp
- [or smount /tmp slave]
+ Now let's make the mount at /tmp; a slave of /mnt
+ # mount --make-slave /tmp
- lets mount /dev/sd0 on /mnt/a
- #mount /dev/sd0 /mnt/a
+ let's mount /dev/sd0 on /mnt/a
+ # mount /dev/sd0 /mnt/a
#ls /mnt/a
t1 t2 t3
Note the mount event has propagated to the mount at /tmp
- However lets see what happens if we mount something on the mount at /tmp
+ However let's see what happens if we mount something on the mount at /tmp
- #mount /dev/sd1 /tmp/b
+ # mount /dev/sd1 /tmp/b
#ls /tmp/b
s1 s2 s3
2d) A unbindable mount is a unbindable private mount
- lets say we have a mount at /mnt and we make is unbindable
+ let's say we have a mount at /mnt and we make is unbindable
- #mount --make-unbindable /mnt
- [ smount /mnt unbindable ]
+ # mount --make-unbindable /mnt
- Lets try to bind mount this mount somewhere else.
+ Let's try to bind mount this mount somewhere else.
# mount --bind /mnt /tmp
mount: wrong fs type, bad option, bad superblock on /mnt,
or too many mounted file systems
Binding a unbindable mount is a invalid operation.
-3) smount command
+3) Setting mount states
- Currently the mount command is not aware of shared subtree features.
- Work is in progress to add the support in mount ( util-linux package ).
- Till then use the following program.
+ The mount command (util-linux package) can be used to set mount
+ states:
- ------------------------------------------------------------------------
- //
- //this code was developed my Miklos Szeredi <miklos@szeredi.hu>
- //and modified by Ram Pai <linuxram@us.ibm.com>
- // sample usage:
- // smount /tmp shared
- //
- #include <stdio.h>
- #include <stdlib.h>
- #include <unistd.h>
- #include <string.h>
- #include <sys/mount.h>
- #include <sys/fsuid.h>
-
- #ifndef MS_REC
- #define MS_REC 0x4000 /* 16384: Recursive loopback */
- #endif
-
- #ifndef MS_SHARED
- #define MS_SHARED 1<<20 /* Shared */
- #endif
-
- #ifndef MS_PRIVATE
- #define MS_PRIVATE 1<<18 /* Private */
- #endif
-
- #ifndef MS_SLAVE
- #define MS_SLAVE 1<<19 /* Slave */
- #endif
-
- #ifndef MS_UNBINDABLE
- #define MS_UNBINDABLE 1<<17 /* Unbindable */
- #endif
-
- int main(int argc, char *argv[])
- {
- int type;
- if(argc != 3) {
- fprintf(stderr, "usage: %s dir "
- "<rshared|rslave|rprivate|runbindable|shared|slave"
- "|private|unbindable>\n" , argv[0]);
- return 1;
- }
-
- fprintf(stdout, "%s %s %s\n", argv[0], argv[1], argv[2]);
-
- if (strcmp(argv[2],"rshared")==0)
- type=(MS_SHARED|MS_REC);
- else if (strcmp(argv[2],"rslave")==0)
- type=(MS_SLAVE|MS_REC);
- else if (strcmp(argv[2],"rprivate")==0)
- type=(MS_PRIVATE|MS_REC);
- else if (strcmp(argv[2],"runbindable")==0)
- type=(MS_UNBINDABLE|MS_REC);
- else if (strcmp(argv[2],"shared")==0)
- type=MS_SHARED;
- else if (strcmp(argv[2],"slave")==0)
- type=MS_SLAVE;
- else if (strcmp(argv[2],"private")==0)
- type=MS_PRIVATE;
- else if (strcmp(argv[2],"unbindable")==0)
- type=MS_UNBINDABLE;
- else {
- fprintf(stderr, "invalid operation: %s\n", argv[2]);
- return 1;
- }
- setfsuid(getuid());
-
- if(mount("", argv[1], "dontcare", type, "") == -1) {
- perror("mount");
- return 1;
- }
- return 0;
- }
- -----------------------------------------------------------------------
-
- Copy the above code snippet into smount.c
- gcc -o smount smount.c
-
-
- (i) To mark all the mounts under /mnt as shared execute the following
- command:
-
- smount /mnt rshared
- the corresponding syntax planned for mount command is
- mount --make-rshared /mnt
-
- just to mark a mount /mnt as shared, execute the following
- command:
- smount /mnt shared
- the corresponding syntax planned for mount command is
- mount --make-shared /mnt
-
- (ii) To mark all the shared mounts under /mnt as slave execute the
- following
-
- command:
- smount /mnt rslave
- the corresponding syntax planned for mount command is
- mount --make-rslave /mnt
-
- just to mark a mount /mnt as slave, execute the following
- command:
- smount /mnt slave
- the corresponding syntax planned for mount command is
- mount --make-slave /mnt
-
- (iii) To mark all the mounts under /mnt as private execute the
- following command:
-
- smount /mnt rprivate
- the corresponding syntax planned for mount command is
- mount --make-rprivate /mnt
-
- just to mark a mount /mnt as private, execute the following
- command:
- smount /mnt private
- the corresponding syntax planned for mount command is
- mount --make-private /mnt
-
- NOTE: by default all the mounts are created as private. But if
- you want to change some shared/slave/unbindable mount as
- private at a later point in time, this command can help.
-
- (iv) To mark all the mounts under /mnt as unbindable execute the
- following
-
- command:
- smount /mnt runbindable
- the corresponding syntax planned for mount command is
- mount --make-runbindable /mnt
-
- just to mark a mount /mnt as unbindable, execute the following
- command:
- smount /mnt unbindable
- the corresponding syntax planned for mount command is
- mount --make-unbindable /mnt
+ mount --make-shared mountpoint
+ mount --make-slave mountpoint
+ mount --make-private mountpoint
+ mount --make-unbindable mountpoint
4) Use cases
mount --rbind / /view/v3
mount --rbind / /view/v4
- and if /usr has a versioning filesystem mounted, than that
+ and if /usr has a versioning filesystem mounted, then that
mount appears at /view/v1/usr, /view/v2/usr, /view/v3/usr and
/view/v4/usr too
For example:
mount --make-shared /mnt
- mount --bin /mnt /tmp
+ mount --bind /mnt /tmp
The mount at /mnt and that at /tmp are both shared and belong
to the same peer group. Anything mounted or unmounted under
then the subtree under the unbindable mount is pruned in the new
location.
- eg: lets say we have the following mount tree.
+ eg: let's say we have the following mount tree.
A
/ \
/ \ / \
D E F G
- Lets say all the mount except the mount C in the tree are
+ Let's say all the mount except the mount C in the tree are
of a type other than unbindable.
If this tree is rbound to say Z
'b' on mounts that receive propagation from mount 'B' and does not have
sub-mounts within them are unmounted.
- Example: Lets say 'B1', 'B2', 'B3' are shared mounts that propagate to
+ Example: Let's say 'B1', 'B2', 'B3' are shared mounts that propagate to
each other.
- lets say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
+ let's say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
'B1', 'B2' and 'B3' respectively.
- lets say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
+ let's say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
mount 'B1', 'B2' and 'B3' respectively.
if 'C1' is unmounted, all the mounts that are most-recently-mounted on
A cloned namespace contains all the mounts as that of the parent
namespace.
- Lets say 'A' and 'B' are the corresponding mounts in the parent and the
+ Let's say 'A' and 'B' are the corresponding mounts in the parent and the
child namespace.
If 'A' is shared, then 'B' is also shared and 'A' and 'B' propagate to
mount --make-slave /mnt
At this point we have the first mount at /tmp and
- its root dentry is 1. Lets call this mount 'A'
+ its root dentry is 1. Let's call this mount 'A'
And then we have a second mount at /tmp1 with root
- dentry 2. Lets call this mount 'B'
+ dentry 2. Let's call this mount 'B'
Next we have a third mount at /mnt with root dentry
- mnt. Lets call this mount 'C'
+ mnt. Let's call this mount 'C'
'B' is the slave of 'A' and 'C' is a slave of 'B'
A -> B -> C
Q3 Why is unbindable mount needed?
- Lets say we want to replicate the mount tree at multiple
+ Let's say we want to replicate the mount tree at multiple
locations within the same subtree.
if one rbind mounts a tree within the same subtree 'n' times
mounts. Here is a example.
step 1:
- lets say the root tree has just two directories with
+ let's say the root tree has just two directories with
one vfsmount.
root
/ \
Unclonable mounts come in handy here.
step 1:
- lets say the root tree has just two directories with
+ let's say the root tree has just two directories with
one vfsmount.
root
/ \
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct page *, struct page *);
int (*launder_page) (struct page *);
+ int (*error_remove_page) (struct mapping *mapping, struct page *page);
};
writepage: called by the VM to write a dirty page to backing store.
prevent redirtying the page, it is kept locked during the whole
operation.
+ error_remove_page: normally set to generic_error_remove_page if truncation
+ is ok for this address space. Used for memory failure handling.
+ Setting this implies you deal with pages going away under you,
+ unless you have them locked or reference counts increased.
+
+
The File Object
===============
Supported chips:
* All Intel Core family
Prefix: 'coretemp'
- CPUID: family 0x6, models 0xe, 0xf, 0x16, 0x17
+ CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
+ 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
+ 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
+++ /dev/null
-Kernel driver fscher
-====================
-
-Supported chips:
- * Fujitsu-Siemens Hermes chip
- Prefix: 'fscher'
- Addresses scanned: I2C 0x73
-
-Authors:
- Reinhard Nissl <rnissl@gmx.de> based on work
- from Hermann Jung <hej@odn.de>,
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>
-
-Description
------------
-
-This driver implements support for the Fujitsu-Siemens Hermes chip. It is
-described in the 'Register Set Specification BMC Hermes based Systemboard'
-from Fujitsu-Siemens.
-
-The Hermes chip implements a hardware-based system management, e.g. for
-controlling fan speed and core voltage. There is also a watchdog counter on
-the chip which can trigger an alarm and even shut the system down.
-
-The chip provides three temperature values (CPU, motherboard and
-auxiliary), three voltage values (+12V, +5V and battery) and three fans
-(power supply, CPU and auxiliary).
-
-Temperatures are measured in degrees Celsius. The resolution is 1 degree.
-
-Fan rotation speeds are reported in RPM (rotations per minute). The value
-can be divided by a programmable divider (1, 2 or 4) which is stored on
-the chip.
-
-Voltage sensors (also known as "in" sensors) report their values in volts.
-
-All values are reported as final values from the driver. There is no need
-for further calculations.
-
-
-Detailed description
---------------------
-
-Below you'll find a single line description of all the bit values. With
-this information, you're able to decode e. g. alarms, wdog, etc. To make
-use of the watchdog, you'll need to set the watchdog time and enable the
-watchdog. After that it is necessary to restart the watchdog time within
-the specified period of time, or a system reset will occur.
-
-* revision
- READING & 0xff = 0x??: HERMES revision identification
-
-* alarms
- READING & 0x80 = 0x80: CPU throttling active
- READING & 0x80 = 0x00: CPU running at full speed
-
- READING & 0x10 = 0x10: software event (see control:1)
- READING & 0x10 = 0x00: no software event
-
- READING & 0x08 = 0x08: watchdog event (see wdog:2)
- READING & 0x08 = 0x00: no watchdog event
-
- READING & 0x02 = 0x02: thermal event (see temp*:1)
- READING & 0x02 = 0x00: no thermal event
-
- READING & 0x01 = 0x01: fan event (see fan*:1)
- READING & 0x01 = 0x00: no fan event
-
- READING & 0x13 ! 0x00: ALERT LED is flashing
-
-* control
- READING & 0x01 = 0x01: software event
- READING & 0x01 = 0x00: no software event
-
- WRITING & 0x01 = 0x01: set software event
- WRITING & 0x01 = 0x00: clear software event
-
-* watchdog_control
- READING & 0x80 = 0x80: power off on watchdog event while thermal event
- READING & 0x80 = 0x00: watchdog power off disabled (just system reset enabled)
-
- READING & 0x40 = 0x40: watchdog timebase 60 seconds (see also wdog:1)
- READING & 0x40 = 0x00: watchdog timebase 2 seconds
-
- READING & 0x10 = 0x10: watchdog enabled
- READING & 0x10 = 0x00: watchdog disabled
-
- WRITING & 0x80 = 0x80: enable "power off on watchdog event while thermal event"
- WRITING & 0x80 = 0x00: disable "power off on watchdog event while thermal event"
-
- WRITING & 0x40 = 0x40: set watchdog timebase to 60 seconds
- WRITING & 0x40 = 0x00: set watchdog timebase to 2 seconds
-
- WRITING & 0x20 = 0x20: disable watchdog
-
- WRITING & 0x10 = 0x10: enable watchdog / restart watchdog time
-
-* watchdog_state
- READING & 0x02 = 0x02: watchdog system reset occurred
- READING & 0x02 = 0x00: no watchdog system reset occurred
-
- WRITING & 0x02 = 0x02: clear watchdog event
-
-* watchdog_preset
- READING & 0xff = 0x??: configured watch dog time in units (see wdog:3 0x40)
-
- WRITING & 0xff = 0x??: configure watch dog time in units
-
-* in* (0: +5V, 1: +12V, 2: onboard 3V battery)
- READING: actual voltage value
-
-* temp*_status (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
- READING & 0x02 = 0x02: thermal event (overtemperature)
- READING & 0x02 = 0x00: no thermal event
-
- READING & 0x01 = 0x01: sensor is working
- READING & 0x01 = 0x00: sensor is faulty
-
- WRITING & 0x02 = 0x02: clear thermal event
-
-* temp*_input (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
- READING: actual temperature value
-
-* fan*_status (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- READING & 0x04 = 0x04: fan event (fan fault)
- READING & 0x04 = 0x00: no fan event
-
- WRITING & 0x04 = 0x04: clear fan event
-
-* fan*_div (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- Divisors 2,4 and 8 are supported, both for reading and writing
-
-* fan*_pwm (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- READING & 0xff = 0x00: fan may be switched off
- READING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
- READING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
- READING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
-
- WRITING & 0xff = 0x00: fan may be switched off
- WRITING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
- WRITING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
- WRITING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
-
-* fan*_input (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- READING: actual RPM value
-
-
-Limitations
------------
-
-* Measuring fan speed
-It seems that the chip counts "ripples" (typical fans produce 2 ripples per
-rotation while VERAX fans produce 18) in a 9-bit register. This register is
-read out every second, then the ripple prescaler (2, 4 or 8) is applied and
-the result is stored in the 8 bit output register. Due to the limitation of
-the counting register to 9 bits, it is impossible to measure a VERAX fan
-properly (even with a prescaler of 8). At its maximum speed of 3500 RPM the
-fan produces 1080 ripples per second which causes the counting register to
-overflow twice, leading to only 186 RPM.
-
-* Measuring input voltages
-in2 ("battery") reports the voltage of the onboard lithium battery and not
-+3.3V from the power supply.
-
-* Undocumented features
-Fujitsu-Siemens Computers has not documented all features of the chip so
-far. Their software, System Guard, shows that there are a still some
-features which cannot be controlled by this implementation.
<http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://sourceforge.net/projects/linux-udf/>
+'m' 00-09 linux/mmtimer.h
'm' all linux/mtio.h conflict!
'm' all linux/soundcard.h conflict!
'm' all linux/synclink.h conflict!
INSTALL_PATH specifies where to place the updated kernel and system map
images. Default is /boot, but you can set it to other values.
+INSTALLKERNEL
+--------------------------------------------------
+Install script called when using "make install".
+The default name is "installkernel".
+
+The script will be called with the following arguments:
+ $1 - kernel version
+ $2 - kernel image file
+ $3 - kernel map file
+ $4 - default install path (use root directory if blank)
+
+The implmentation of "make install" is architecture specific
+and it may differ from the above.
+
+INSTALLKERNEL is provided to enable the possibility to
+specify a custom installer when cross compiling a kernel.
MODLIB
--------------------------------------------------
--- 3.9 Dependency tracking
--- 3.10 Special Rules
--- 3.11 $(CC) support functions
+ --- 3.12 $(LD) support functions
=== 4 Host Program support
--- 4.1 Simple Host Program
The second argument is optional, and if supplied will be used
if first argument is not supported.
- ld-option
- ld-option is used to check if $(CC) when used to link object files
+ cc-ldoption
+ cc-ldoption is used to check if $(CC) when used to link object files
supports the given option. An optional second option may be
specified if first option are not supported.
Example:
#arch/i386/kernel/Makefile
- vsyscall-flags += $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ vsyscall-flags += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
In the above example, vsyscall-flags will be assigned the option
-Wl$(comma)--hash-style=sysv if it is supported by $(CC).
endif
endif
+--- 3.12 $(LD) support functions
+
+ ld-option
+ ld-option is used to check if $(LD) supports the supplied option.
+ ld-option takes two options as arguments.
+ The second argument is an optional option that can be used if the
+ first option is not supported by $(LD).
+
+ Example:
+ #Makefile
+ LDFLAGS_vmlinux += $(call really-ld-option, -X)
+
+
=== 4 Host Program support
Kbuild supports building executables on the host for use during the
Not all bits in the mask can be modified. Not all bits that can be
modified do anything. Not all hot keys can be individually controlled
-by the mask. Some models do not support the mask at all, and in those
-models, hot keys cannot be controlled individually. The behaviour of
-the mask is, therefore, highly dependent on the ThinkPad model.
+by the mask. Some models do not support the mask at all. The behaviour
+of the mask is, therefore, highly dependent on the ThinkPad model.
+
+The driver will filter out any unmasked hotkeys, so even if the firmware
+doesn't allow disabling an specific hotkey, the driver will not report
+events for unmasked hotkeys.
Note that unmasking some keys prevents their default behavior. For
example, if Fn+F5 is unmasked, that key will no longer enable/disable
-Bluetooth by itself.
+Bluetooth by itself in firmware.
-Note also that not all Fn key combinations are supported through ACPI.
-For example, on the X40, the brightness, volume and "Access IBM" buttons
-do not generate ACPI events even with this driver. They *can* be used
-through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
+Note also that not all Fn key combinations are supported through ACPI
+depending on the ThinkPad model and firmware version. On those
+ThinkPads, it is still possible to support some extra hotkeys by
+polling the "CMOS NVRAM" at least 10 times per second. The driver
+attempts to enables this functionality automatically when required.
procfs notes:
1: does nothing
hotkey_mask:
- bit mask to enable driver-handling (and depending on
+ bit mask to enable reporting (and depending on
the firmware, ACPI event generation) for each hot key
(see above). Returns the current status of the hot keys
mask, and allows one to modify it.
- Note: when NVRAM polling is active, the firmware mask
- will be different from the value returned by
- hotkey_mask. The driver will retain enabled bits for
- hotkeys that are under NVRAM polling even if the
- firmware refuses them, and will not set these bits on
- the firmware hot key mask.
-
hotkey_all_mask:
bit mask that should enable event reporting for all
supported hot keys, when echoed to hotkey_mask above.
bit mask that should enable event reporting for all
supported hot keys, except those which are always
handled by the firmware anyway. Echo it to
- hotkey_mask above, to use.
+ hotkey_mask above, to use. This is the default mask
+ used by the driver.
hotkey_source_mask:
bit mask that selects which hot keys will the driver
based on the capabilities reported by the ACPI firmware,
but it can be overridden at runtime.
- Hot keys whose bits are set in both hotkey_source_mask
- and also on hotkey_mask are polled for in NVRAM. Only a
- few hot keys are available through CMOS NVRAM polling.
+ Hot keys whose bits are set in hotkey_source_mask are
+ polled for in NVRAM, and reported as hotkey events if
+ enabled in hotkey_mask. Only a few hot keys are
+ available through CMOS NVRAM polling.
Warning: when in NVRAM mode, the volume up/down/mute
keys are synthesized according to changes in the mixer,
0x2305 System is waking up from suspend to eject bay
0x2404 System is waking up from hibernation to undock
0x2405 System is waking up from hibernation to eject bay
+0x5010 Brightness level changed/control event
The above events are never propagated by the driver.
0x4003 Undocked (see 0x2x04), can sleep again
0x500B Tablet pen inserted into its storage bay
0x500C Tablet pen removed from its storage bay
-0x5010 Brightness level changed (newer Lenovo BIOSes)
The above events are propagated by the driver.
2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process
these keys on userspace somehow (e.g. by calling xbacklight).
+ The driver will do this automatically if it detects that ACPI video
+ has been disabled.
Bluetooth
0x020400: Marker for 16 LEDs support. Also, LEDs that are known
to not exist in a given model are not registered with
the LED sysfs class anymore.
+
+0x020500: Updated hotkey driver, hotkey_mask is always available
+ and it is always able to disable hot keys. Very old
+ thinkpads are properly supported. hotkey_bios_mask
+ is deprecated and marked for removal.
of error messages about running out of file handles, you might
want to increase this limit.
-The three values in file-nr denote the number of allocated
-file handles, the number of unused file handles and the maximum
-number of file handles. When the allocated file handles come
-close to the maximum, but the number of unused file handles is
-significantly greater than 0, you've encountered a peak in your
-usage of file handles and you don't need to increase the maximum.
-
+Historically, the three values in file-nr denoted the number of
+allocated file handles, the number of allocated but unused file
+handles, and the maximum number of file handles. Linux 2.6 always
+reports 0 as the number of free file handles -- this is not an
+error, it just means that the number of allocated file handles
+exactly matches the number of used file handles.
+
+Attempts to allocate more file descriptors than file-max are
+reported with printk, look for "VFS: file-max limit <number>
+reached".
==============================================================
nr_open:
- callhome [ S390 only ]
- auto_msgmni
- core_pattern
+- core_pipe_limit
- core_uses_pid
- ctrl-alt-del
- dentry-state
==============================================================
+core_pipe_limit:
+
+This sysctl is only applicable when core_pattern is configured to pipe core
+files to user space helper a (when the first character of core_pattern is a '|',
+see above). When collecting cores via a pipe to an application, it is
+occasionally usefull for the collecting application to gather data about the
+crashing process from its /proc/pid directory. In order to do this safely, the
+kernel must wait for the collecting process to exit, so as not to remove the
+crashing processes proc files prematurely. This in turn creates the possibility
+that a misbehaving userspace collecting process can block the reaping of a
+crashed process simply by never exiting. This sysctl defends against that. It
+defines how many concurrent crashing processes may be piped to user space
+applications in parallel. If this value is exceeded, then those crashing
+processes above that value are noted via the kernel log and their cores are
+skipped. 0 is a special value, indicating that unlimited processes may be
+captured in parallel, but that no waiting will take place (i.e. the collecting
+process is not guaranteed access to /proc/<crahing pid>/). This value defaults
+to 0.
+
+==============================================================
+
core_uses_pid:
The default coredump filename is "core". By setting
- legacy_va_layout
- lowmem_reserve_ratio
- max_map_count
+- memory_failure_early_kill
+- memory_failure_recovery
- min_free_kbytes
- min_slab_ratio
- min_unmapped_ratio
- vfs_cache_pressure
- zone_reclaim_mode
-
==============================================================
block_dump
The default value is 65536.
+=============================================================
+
+memory_failure_early_kill:
+
+Control how to kill processes when uncorrected memory error (typically
+a 2bit error in a memory module) is detected in the background by hardware
+that cannot be handled by the kernel. In some cases (like the page
+still having a valid copy on disk) the kernel will handle the failure
+transparently without affecting any applications. But if there is
+no other uptodate copy of the data it will kill to prevent any data
+corruptions from propagating.
+
+1: Kill all processes that have the corrupted and not reloadable page mapped
+as soon as the corruption is detected. Note this is not supported
+for a few types of pages, like kernel internally allocated data or
+the swap cache, but works for the majority of user pages.
+
+0: Only unmap the corrupted page from all processes and only kill a process
+who tries to access it.
+
+The kill is done using a catchable SIGBUS with BUS_MCEERR_AO, so processes can
+handle this if they want to.
+
+This is only active on architectures/platforms with advanced machine
+check handling and depends on the hardware capabilities.
+
+Applications can override this setting individually with the PR_MCE_KILL prctl
+
+==============================================================
+
+memory_failure_recovery
+
+Enable memory failure recovery (when supported by the platform)
+
+1: Attempt recovery.
+
+0: Always panic on a memory failure.
+
==============================================================
min_free_kbytes:
mm start up ... this is a loose form of stability on mm_users. For
example, it is used in copy_mm to protect against a racing tlb_gather_mmu
single address space optimization, so that the zap_page_range (from
-vmtruncate) does not lose sending ipi's to cloned threads that might
+truncate) does not lose sending ipi's to cloned threads that might
be spawned underneath it and go to user mode to drag in pte's into tlbs.
swap_lock
* Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
*/
+#define _LARGEFILE64_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <getopt.h>
#include <limits.h>
+#include <assert.h>
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/fcntl.h>
+/*
+ * pagemap kernel ABI bits
+ */
+
+#define PM_ENTRY_BYTES sizeof(uint64_t)
+#define PM_STATUS_BITS 3
+#define PM_STATUS_OFFSET (64 - PM_STATUS_BITS)
+#define PM_STATUS_MASK (((1LL << PM_STATUS_BITS) - 1) << PM_STATUS_OFFSET)
+#define PM_STATUS(nr) (((nr) << PM_STATUS_OFFSET) & PM_STATUS_MASK)
+#define PM_PSHIFT_BITS 6
+#define PM_PSHIFT_OFFSET (PM_STATUS_OFFSET - PM_PSHIFT_BITS)
+#define PM_PSHIFT_MASK (((1LL << PM_PSHIFT_BITS) - 1) << PM_PSHIFT_OFFSET)
+#define PM_PSHIFT(x) (((u64) (x) << PM_PSHIFT_OFFSET) & PM_PSHIFT_MASK)
+#define PM_PFRAME_MASK ((1LL << PM_PSHIFT_OFFSET) - 1)
+#define PM_PFRAME(x) ((x) & PM_PFRAME_MASK)
+
+#define PM_PRESENT PM_STATUS(4LL)
+#define PM_SWAP PM_STATUS(2LL)
+
+
/*
* kernel page flags
*/
static unsigned long opt_offset[MAX_ADDR_RANGES];
static unsigned long opt_size[MAX_ADDR_RANGES];
+#define MAX_VMAS 10240
+static int nr_vmas;
+static unsigned long pg_start[MAX_VMAS];
+static unsigned long pg_end[MAX_VMAS];
+static unsigned long voffset;
+
+static int pagemap_fd;
+
#define MAX_BIT_FILTERS 64
static int nr_bit_filters;
static uint64_t opt_mask[MAX_BIT_FILTERS];
#define PAGES_BATCH (64 << 10) /* 64k pages */
static int kpageflags_fd;
-static uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
#define HASH_SHIFT 13
#define HASH_SIZE (1 << HASH_SHIFT)
type __min2 = (y); \
__min1 < __min2 ? __min1 : __min2; })
+#define max_t(type, x, y) ({ \
+ type __max1 = (x); \
+ type __max2 = (y); \
+ __max1 > __max2 ? __max1 : __max2; })
+
static unsigned long pages2mb(unsigned long pages)
{
return (pages * page_size) >> 20;
static void show_page_range(unsigned long offset, uint64_t flags)
{
static uint64_t flags0;
+ static unsigned long voff;
static unsigned long index;
static unsigned long count;
- if (flags == flags0 && offset == index + count) {
+ if (flags == flags0 && offset == index + count &&
+ (!opt_pid || voffset == voff + count)) {
count++;
return;
}
- if (count)
- printf("%lu\t%lu\t%s\n",
+ if (count) {
+ if (opt_pid)
+ printf("%lx\t", voff);
+ printf("%lx\t%lx\t%s\n",
index, count, page_flag_name(flags0));
+ }
flags0 = flags;
index = offset;
+ voff = voffset;
count = 1;
}
static void show_page(unsigned long offset, uint64_t flags)
{
- printf("%lu\t%s\n", offset, page_flag_name(flags));
+ if (opt_pid)
+ printf("%lx\t", voffset);
+ printf("%lx\t%s\n", offset, page_flag_name(flags));
}
static void show_summary(void)
lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
while (count) {
+ uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
+
batch = min_t(unsigned long, count, PAGES_BATCH);
n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
if (n == 0)
}
}
+
+#define PAGEMAP_BATCH 4096
+static unsigned long task_pfn(unsigned long pgoff)
+{
+ static uint64_t buf[PAGEMAP_BATCH];
+ static unsigned long start;
+ static long count;
+ uint64_t pfn;
+
+ if (pgoff < start || pgoff >= start + count) {
+ if (lseek64(pagemap_fd,
+ (uint64_t)pgoff * PM_ENTRY_BYTES,
+ SEEK_SET) < 0) {
+ perror("pagemap seek");
+ exit(EXIT_FAILURE);
+ }
+ count = read(pagemap_fd, buf, sizeof(buf));
+ if (count == 0)
+ return 0;
+ if (count < 0) {
+ perror("pagemap read");
+ exit(EXIT_FAILURE);
+ }
+ if (count % PM_ENTRY_BYTES) {
+ fatal("pagemap read not aligned.\n");
+ exit(EXIT_FAILURE);
+ }
+ count /= PM_ENTRY_BYTES;
+ start = pgoff;
+ }
+
+ pfn = buf[pgoff - start];
+ if (pfn & PM_PRESENT)
+ pfn = PM_PFRAME(pfn);
+ else
+ pfn = 0;
+
+ return pfn;
+}
+
+static void walk_task(unsigned long index, unsigned long count)
+{
+ int i = 0;
+ const unsigned long end = index + count;
+
+ while (index < end) {
+
+ while (pg_end[i] <= index)
+ if (++i >= nr_vmas)
+ return;
+ if (pg_start[i] >= end)
+ return;
+
+ voffset = max_t(unsigned long, pg_start[i], index);
+ index = min_t(unsigned long, pg_end[i], end);
+
+ assert(voffset < index);
+ for (; voffset < index; voffset++) {
+ unsigned long pfn = task_pfn(voffset);
+ if (pfn)
+ walk_pfn(pfn, 1);
+ }
+ }
+}
+
+static void add_addr_range(unsigned long offset, unsigned long size)
+{
+ if (nr_addr_ranges >= MAX_ADDR_RANGES)
+ fatal("too many addr ranges\n");
+
+ opt_offset[nr_addr_ranges] = offset;
+ opt_size[nr_addr_ranges] = min_t(unsigned long, size, ULONG_MAX-offset);
+ nr_addr_ranges++;
+}
+
static void walk_addr_ranges(void)
{
int i;
}
if (!nr_addr_ranges)
- walk_pfn(0, ULONG_MAX);
+ add_addr_range(0, ULONG_MAX);
for (i = 0; i < nr_addr_ranges; i++)
- walk_pfn(opt_offset[i], opt_size[i]);
+ if (!opt_pid)
+ walk_pfn(opt_offset[i], opt_size[i]);
+ else
+ walk_task(opt_offset[i], opt_size[i]);
close(kpageflags_fd);
}
" -r|--raw Raw mode, for kernel developers\n"
" -a|--addr addr-spec Walk a range of pages\n"
" -b|--bits bits-spec Walk pages with specified bits\n"
-#if 0 /* planned features */
" -p|--pid pid Walk process address space\n"
+#if 0 /* planned features */
" -f|--file filename Walk file address space\n"
#endif
" -l|--list Show page details in ranges\n"
" N+M pages range from N to N+M-1\n"
" N,M pages range from N to M-1\n"
" N, pages range from N to end\n"
-" ,M pages range from 0 to M\n"
+" ,M pages range from 0 to M-1\n"
"bits-spec:\n"
" bit1,bit2 (flags & (bit1|bit2)) != 0\n"
" bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1\n"
static void parse_pid(const char *str)
{
+ FILE *file;
+ char buf[5000];
+
opt_pid = parse_number(str);
-}
-static void parse_file(const char *name)
-{
+ sprintf(buf, "/proc/%d/pagemap", opt_pid);
+ pagemap_fd = open(buf, O_RDONLY);
+ if (pagemap_fd < 0) {
+ perror(buf);
+ exit(EXIT_FAILURE);
+ }
+
+ sprintf(buf, "/proc/%d/maps", opt_pid);
+ file = fopen(buf, "r");
+ if (!file) {
+ perror(buf);
+ exit(EXIT_FAILURE);
+ }
+
+ while (fgets(buf, sizeof(buf), file) != NULL) {
+ unsigned long vm_start;
+ unsigned long vm_end;
+ unsigned long long pgoff;
+ int major, minor;
+ char r, w, x, s;
+ unsigned long ino;
+ int n;
+
+ n = sscanf(buf, "%lx-%lx %c%c%c%c %llx %x:%x %lu",
+ &vm_start,
+ &vm_end,
+ &r, &w, &x, &s,
+ &pgoff,
+ &major, &minor,
+ &ino);
+ if (n < 10) {
+ fprintf(stderr, "unexpected line: %s\n", buf);
+ continue;
+ }
+ pg_start[nr_vmas] = vm_start / page_size;
+ pg_end[nr_vmas] = vm_end / page_size;
+ if (++nr_vmas >= MAX_VMAS) {
+ fprintf(stderr, "too many VMAs\n");
+ break;
+ }
+ }
+ fclose(file);
}
-static void add_addr_range(unsigned long offset, unsigned long size)
+static void parse_file(const char *name)
{
- if (nr_addr_ranges >= MAX_ADDR_RANGES)
- fatal("too much addr ranges\n");
-
- opt_offset[nr_addr_ranges] = offset;
- opt_size[nr_addr_ranges] = size;
- nr_addr_ranges++;
}
static void parse_addr_range(const char *optarg)
}
}
+ if (opt_list && opt_pid)
+ printf("voffset\t");
if (opt_list == 1)
- printf("offset\tcount\tflags\n");
+ printf("offset\tlen\tflags\n");
if (opt_list == 2)
printf("offset\tflags\n");
S: Supported
F: drivers/acpi/fan.c
-ACPI PCI HOTPLUG DRIVER
-M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
-L: linux-pci@vger.kernel.org
-S: Supported
-F: drivers/pci/hotplug/acpi*
-
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Imre Kaloz <kaloz@openwrt.org>
M: Krzysztof Halasa <khc@pm.waw.pl>
-L: linux-arm-kernel@lists.infradead.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ixp4xx/
M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
-ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-M: Marek Vasut <marek.vasut@gmail.com>
+ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
+P: Marek Vasut
+M: marek.vasut@gmail.com
+L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
ARM/PALM TREO 680 SUPPORT
M: Tomas Cech <sleep_walker@suse.cz>
+L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
ARM/PALMZ72 SUPPORT
M: Sergey Lapin <slapin@ossfans.org>
+L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
F: drivers/hwmon/
HARDWARE RANDOM NUMBER GENERATOR CORE
-S: Orphan
+M: Matt Mackall <mpm@selenic.com>
+M: Herbert Xu <herbert@gondor.apana.org.au>
+S: Odd fixes
F: Documentation/hw_random.txt
F: drivers/char/hw_random/
F: include/linux/hw_random.h
F: drivers/pci/
F: include/linux/pci*
-PCIE HOTPLUG DRIVER
-M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
+PCI HOTPLUG
+M: Jesse Barnes <jbarnes@virtuousgeek.org>
L: linux-pci@vger.kernel.org
S: Supported
-F: drivers/pci/pcie/
+F: drivers/pci/hotplug
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
F: drivers/usb/gadget/lh7a40*
F: drivers/usb/host/ohci-lh7a40*
-SHPC HOTPLUG DRIVER
-M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
-L: linux-pci@vger.kernel.org
-S: Supported
-F: drivers/pci/hotplug/shpchp*
-
SIMPLE FIRMWARE INTERFACE (SFI)
P: Len Brown
M: lenb@kernel.org
F: drivers/sfi/
F: include/linux/sfi*.h
-
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
M: Vincent Sanders <support@simtec.co.uk>
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+#
+# To force ARCH and CROSS_COMPILE settings include kernel.* files
+# in the kernel tree - do not patch this file.
export KBUILD_BUILDHOST := $(SUBARCH)
-ARCH ?= $(SUBARCH)
-CROSS_COMPILE ?=
+
+# Kbuild save the ARCH and CROSS_COMPILE setting in kernel.* files.
+# Restore these settings and check that user did not specify
+# conflicting values.
+
+saved_arch := $(shell cat include/generated/kernel.arch 2> /dev/null)
+saved_cross := $(shell cat include/generated/kernel.cross 2> /dev/null)
+
+ifneq ($(CROSS_COMPILE),)
+ ifneq ($(saved_cross),)
+ ifneq ($(CROSS_COMPILE),$(saved_cross))
+ $(error CROSS_COMPILE changed from \
+ "$(saved_cross)" to \
+ to "$(CROSS_COMPILE)". \
+ Use "make mrproper" to fix it up)
+ endif
+ endif
+else
+ CROSS_COMPILE := $(saved_cross)
+endif
+
+ifneq ($(ARCH),)
+ ifneq ($(saved_arch),)
+ ifneq ($(saved_arch),$(ARCH))
+ $(error ARCH changed from \
+ "$(saved_arch)" to "$(ARCH)". \
+ Use "make mrproper" to fix it up)
+ endif
+ endif
+else
+ ifneq ($(saved_arch),)
+ ARCH := $(saved_arch)
+ else
+ ARCH := $(SUBARCH)
+ endif
+endif
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
GENKSYMS = scripts/genksyms/genksyms
+INSTALLKERNEL := installkernel
DEPMOD = /sbin/depmod
KALLSYMS = scripts/kallsyms
PERL = perl
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
include $(srctree)/arch/$(SRCARCH)/Makefile
export KBUILD_DEFCONFIG KBUILD_KCONFIG
+# save ARCH & CROSS_COMPILE settings
+$(shell mkdir -p include/generated && \
+ echo $(ARCH) > include/generated/kernel.arch && \
+ echo $(CROSS_COMPILE) > include/generated/kernel.cross)
+
config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
# revert to pre-gcc-4.4 behaviour of .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+# conserve stack if available
+KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
+
# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
# But warn user when we do so
warn-assign = \
# Use --build-id when available.
LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
- $(call ld-option, -Wl$(comma)--build-id,))
+ $(call cc-ldoption, -Wl$(comma)--build-id,))
LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
-LDFLAGS_vmlinux += -X
+LDFLAGS_vmlinux += $(call ld-option, -X,)
endif
# Default kernel image to build when no specific target is given.
# All the preparing..
prepare: prepare0
-# Leave this as default for preprocessing vmlinux.lds.S, which is now
-# done in arch/$(ARCH)/kernel/Makefile
-
-export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-
# The asm symlink changes when $(ARCH) changes.
# Detect this and ask user to run make mrproper
# If asm is a stale symlink (point to dir that does not exist) remove it
#define F_GETOWN 6 /* for sockets. */
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
+#define F_SETOWN_EX 12
+#define F_GETOWN_EX 13
/* for posix fcntl() and lockf() */
#define F_RDLCK 1
extern int smp_num_cpus;
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#else /* CONFIG_SMP */
return node;
}
-static inline cpumask_t node_to_cpumask(int node)
-{
- cpumask_t node_cpu_mask = CPU_MASK_NONE;
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (cpu_to_node(cpu) == node)
- cpu_set(cpu, node_cpu_mask);
- }
-
-#ifdef DEBUG_NUMA
- printk("node %d: cpu_mask: %016lx\n", node, node_cpu_mask);
-#endif
-
- return node_cpu_mask;
-}
-
extern struct cpumask node_to_cpumask_map[];
/* FIXME: This is dumb, recalculating every time. But simple. */
static const struct cpumask *cpumask_of_node(int node)
return &node_to_cpumask_map[node];
}
-#define pcibus_to_cpumask(bus) (cpu_online_map)
#define cpumask_of_pcibus(bus) (cpu_online_mask)
#endif /* !CONFIG_NUMA */
{
struct marvel_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
- mem->page_count, mem->memory);
+ mem->page_count, mem->pages);
}
static int
{
struct titan_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
- mem->page_count, mem->memory);
+ mem->page_count, mem->pages);
}
static int
struct task_struct init_task = INIT_TASK(init_task);
EXPORT_SYMBOL(init_task);
-union thread_union init_thread_union
- __attribute__((section(".data.init_thread")))
- = { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
extern int iommu_reserve(struct pci_iommu_arena *, long, long);
extern int iommu_release(struct pci_iommu_arena *, long, long);
-extern int iommu_bind(struct pci_iommu_arena *, long, long, unsigned long *);
+extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
extern int iommu_unbind(struct pci_iommu_arena *, long, long);
int
iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
- unsigned long *physaddrs)
+ struct page **pages)
{
unsigned long flags;
unsigned long *ptes;
}
for(i = 0, j = pg_start; i < pg_count; i++, j++)
- ptes[j] = mk_iommu_pte(physaddrs[i]);
+ ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));
spin_unlock_irqrestore(&arena->lock, flags);
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/utsname.h>
#include <linux/time.h>
#include <linux/major.h>
#include <linux/stat.h>
\f
static void
-send_ipi_message(cpumask_t to_whom, enum ipi_message_type operation)
+send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
{
int i;
mb();
- for_each_cpu_mask(i, to_whom)
+ for_each_cpu(i, to_whom)
set_bit(operation, &ipi_data[i].bits);
mb();
- for_each_cpu_mask(i, to_whom)
+ for_each_cpu(i, to_whom)
wripir(i);
}
printk(KERN_WARNING
"smp_send_reschedule: Sending IPI to self.\n");
#endif
- send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+ send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
void
if (hard_smp_processor_id() != boot_cpu_id)
printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
#endif
- send_ipi_message(to_whom, IPI_CPU_STOP);
+ send_ipi_message(&to_whom, IPI_CPU_STOP);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_CALL_FUNC);
}
void arch_send_call_function_single_ipi(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+ send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
}
static void
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
OUTPUT_FORMAT("elf64-alpha")
OUTPUT_ARCH(alpha)
} :kernel
RODATA
-
- /* Exception table */
- . = ALIGN(16);
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
/* Will be freed after init */
- . = ALIGN(PAGE_SIZE);
- /* Init code and data */
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : {
- INIT_DATA
- }
-
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- . = ALIGN(8);
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
- . = ALIGN(8);
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- . = ALIGN(8);
- SECURITY_INIT
-
+ __init_begin = ALIGN(PAGE_SIZE);
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
PERCPU(PAGE_SIZE)
-
- . = ALIGN(2 * PAGE_SIZE);
+ /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+ needed for the THREAD_SIZE aligned init_task gets freed after init */
+ . = ALIGN(THREAD_SIZE);
__init_end = .;
/* Freed after init ends here */
- /* Note 2 page alignment above. */
- .data.init_thread : {
- *(.data.init_thread)
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.page_aligned)
- }
-
- . = ALIGN(64);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
-
_data = .;
- /* Data */
- .data : {
- DATA_DATA
- CONSTRUCTORS
- }
+ RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
.got : {
*(.got)
}
_edata = .; /* End of data section */
- __bss_start = .;
- .sbss : {
- *(.sbss)
- *(.scommon)
- }
- .bss : {
- *(.bss)
- *(COMMON)
- }
- __bss_stop = .;
+ BSS_SECTION(0, 0, 0)
_end = .;
.mdebug 0 : {
depends on GENERIC_CLOCKEVENTS
default y if SMP && !LOCAL_TIMERS
+config HAVE_TCM
+ bool
+ select GENERIC_ALLOCATOR
+
config NO_IOPORT
bool
bool "ST-Ericsson U300 Series"
depends on MMU
select CPU_ARM926T
+ select HAVE_TCM
select ARM_AMBA
select ARM_VIC
select GENERIC_TIME
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
-CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
+
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
echo ' (supply initrd image via make variable INITRD=<path>)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
- echo ' Install using (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
+ echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
endef
#
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "zImage" ]; then
# Compressed install
spin_unlock_irqrestore(&lchip->lock, flags);
}
+EXPORT_SYMBOL(locomo_gpio_set_dir);
int locomo_gpio_read_level(struct device *dev, unsigned int bits)
{
ret &= bits;
return ret;
}
+EXPORT_SYMBOL(locomo_gpio_read_level);
int locomo_gpio_read_output(struct device *dev, unsigned int bits)
{
ret &= bits;
return ret;
}
+EXPORT_SYMBOL(locomo_gpio_read_output);
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
{
spin_unlock_irqrestore(&lchip->lock, flags);
}
+EXPORT_SYMBOL(locomo_gpio_write);
static void locomo_m62332_sendbit(void *mapbase, int bit)
{
spin_unlock_irqrestore(&lchip->lock, flags);
}
+EXPORT_SYMBOL(locomo_m62332_senddata);
/*
* Frontlight control
*/
-static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
-
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
{
unsigned long flags;
driver->drv.bus = &locomo_bus_type;
return driver_register(&driver->drv);
}
+EXPORT_SYMBOL(locomo_driver_register);
void locomo_driver_unregister(struct locomo_driver *driver)
{
driver_unregister(&driver->drv);
}
+EXPORT_SYMBOL(locomo_driver_unregister);
static int __init locomo_init(void)
{
MODULE_DESCRIPTION("Sharp LoCoMo core driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
-
-EXPORT_SYMBOL(locomo_driver_register);
-EXPORT_SYMBOL(locomo_driver_unregister);
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-EXPORT_SYMBOL(locomo_gpio_read_level);
-EXPORT_SYMBOL(locomo_gpio_read_output);
-EXPORT_SYMBOL(locomo_gpio_write);
-EXPORT_SYMBOL(locomo_m62332_senddata);
#include <linux/list.h>
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Fri Dec 21 11:06:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-CONFIG_MACH_LITTLETON=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Mon Jul 13 22:48:49 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+CONFIG_CPU_PXA930=y
+CONFIG_CPU_PXA935=y
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+CONFIG_MACH_ZYLONITE=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_PXA930_ROTARY=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PXA930_TRKBALL=y
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MAX7301=y
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_DA903X=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 09:02:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=".xcep-itech"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_MACH_XCEP=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Tue Oct 23 13:33:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
#ifdef __KERNEL__
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
#if __LINUX_ARM_ARCH__ >= 6
/*
* ARMv6 UP and SMP safe atomic ops. We use load exclusive and
* store exclusive to ensure that these are atomic. We may loop
- * to ensure that the update happens. Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
*/
-static inline void atomic_set(atomic_t *v, int i)
-{
- unsigned long tmp;
-
- __asm__ __volatile__("@ atomic_set\n"
-"1: ldrex %0, [%1]\n"
-" strex %0, %2, [%1]\n"
-" teq %0, #0\n"
-" bne 1b"
- : "=&r" (tmp)
- : "r" (&v->counter), "r" (i)
- : "cc");
-}
-
static inline void atomic_add(int i, atomic_t *v)
{
unsigned long tmp;
#error SMP not supported on pre-ARMv6 CPUs
#endif
-#define atomic_set(v,i) (((v)->counter) = (i))
-
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long flags;
#ifndef __ASMARM_CACHE_H
#define __ASMARM_CACHE_H
-#define L1_CACHE_SHIFT 5
+#define L1_CACHE_SHIFT CONFIG_ARM_L1_CACHE_SHIFT
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
/*
#ifndef CONFIG_CPU_CACHE_VIPT
static inline void flush_cache_mm(struct mm_struct *mm)
{
- if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
__cpuc_flush_user_all();
}
static inline void
flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
vma->vm_flags);
}
static inline void
flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = user_addr & PAGE_MASK;
__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
}
unsigned long uaddr, void *kaddr,
unsigned long len, int write)
{
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = (unsigned long)kaddr;
__cpuc_coherent_kern_range(addr, addr + len);
}
return read_cpuid(CPUID_CACHETYPE);
}
+static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
+{
+ return read_cpuid(CPUID_TCM);
+}
+
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
#else
static inline int cpu_is_xsc3(void)
{
- if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+ unsigned int id;
+ id = read_cpuid_id() & 0xffffe000;
+ /* It covers both Intel ID and Marvell ID */
+ if ((id == 0x69056000) || (id == 0x56056000))
return 1;
return 0;
void *ptr;
};
+/* No support for p+q operations */
+static inline int
+iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+ BUG();
+ return 0;
+}
+
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ BUG();
+}
+
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+ BUG();
+}
+
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+ dma_addr_t addr, unsigned char coef)
+{
+ BUG();
+}
+
+static inline int
+iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+ BUG();
+ return 0;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ BUG();
+}
+
+static inline void
+iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+ BUG();
+}
+
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+ dma_addr_t *src)
+{
+ BUG();
+}
+
static inline int iop_adma_get_max_xor(void)
{
return 32;
}
+static inline int iop_adma_get_max_pq(void)
+{
+ BUG();
+ return 0;
+}
+
static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
{
int id = chan->device->id;
return slot_cnt;
}
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+ return 0;
+}
+
static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
return 0;
}
+
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ BUG();
+ return 0;
+}
+
static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
hw_desc->src[0] = val;
}
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
{
struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
- return desc_ctrl.zero_result_err;
+ return desc_ctrl.zero_result_err << SUM_CHECK_P;
}
static inline void iop_chan_append(struct iop_adma_chan *chan)
* @idx: pool index
* @unmap_src_cnt: number of xor sources
* @unmap_len: transaction bytecount
+ * @tx_list: list of descriptors that are associated with one operation
* @async_tx: support for the async_tx api
* @group_list: list of slots that make up a multi-descriptor transaction
* for example transfer lengths larger than the supported hw max
u16 idx;
u16 unmap_src_cnt;
size_t unmap_len;
+ struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
union {
u32 *xor_check_result;
u32 *crc32_result;
+ u32 *pq_check_result;
};
};
+++ /dev/null
-/*
- * arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct mmc_platform_data {
- unsigned int ocr_mask; /* available voltages */
- u32 (*translate_vdd)(struct device *, unsigned int);
- unsigned int (*status)(struct device *);
- int gpio_wp;
- int gpio_cd;
-};
-
-#endif
#ifdef CONFIG_SMP
/* check for possible thread migration */
- if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+ if (!cpumask_empty(mm_cpumask(next)) &&
+ !cpumask_test_cpu(cpu, mm_cpumask(next)))
__flush_icache_all();
#endif
- if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+ if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
check_context(next);
cpu_switch_mm(next->pgd, next);
if (cache_is_vivt())
- cpu_clear(cpu, prev->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
}
#endif
}
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* show local interrupt info
--- /dev/null
+/*
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#ifndef __ASMARM_TCM_H
+#define __ASMARM_TCM_H
+
+#ifndef CONFIG_HAVE_TCM
+#error "You should not be including tcm.h unless you have a TCM!"
+#endif
+
+#include <linux/compiler.h>
+
+/* Tag variables with this */
+#define __tcmdata __section(.tcm.data)
+/* Tag constants with this */
+#define __tcmconst __section(.tcm.rodata)
+/* Tag functions inside TCM called from outside TCM with this */
+#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
+/* Tag function inside TCM called from inside TCM with this */
+#define __tcmlocalfunc __section(.tcm.text)
+
+void *tcm_alloc(size_t len);
+void tcm_free(void *addr, size_t len);
+
+#endif
if (tlb_flag(TLB_WB))
dsb();
- if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_U_FULL))
if (tlb_flag(TLB_WB))
dsb();
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
if (tlb_flag(TLB_V3_PAGE))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V4_U_PAGE))
#define ARM(x...)
#define THUMB(x...) x
+#ifdef __ASSEMBLY__
#define W(instr) instr.w
+#endif
#define BSYM(sym) sym + 1
#else /* !CONFIG_THUMB2_KERNEL */
#define ARM(x...) x
#define THUMB(x...)
+#ifdef __ASSEMBLY__
#define W(instr) instr
+#endif
#define BSYM(sym) sym
#endif /* CONFIG_THUMB2_KERNEL */
# Makefile for the linux kernel.
#
-AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
+AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
ifdef CONFIG_DYNAMIC_FTRACE
CFLAGS_REMOVE_ftrace.o = -pg
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARM_UNWIND) += unwind.o
+obj-$(CONFIG_HAVE_TCM) += tcm.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
@
@ r0 - instruction
@
+#ifndef CONFIG_THUMB2_KERNEL
ldr r0, [r2, #-4]
+#else
+ ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2
+ and r9, r0, #0xf800
+ cmp r9, #0xe800 @ 32-bit instruction if xx >= 0
+ ldrhhs r9, [r2] @ bottom 16 bits
+ orrhs r0, r9, r0, lsl #16
+#endif
adr r9, BSYM(1f)
bl call_fpe
.word no_fp
.previous
-no_fp: mov pc, lr
+ENTRY(no_fp)
+ mov pc, lr
+ENDPROC(no_fp)
__und_usr_unknown:
enable_irq
#ifdef CONFIG_MMU
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
- clrex
-#else
- strex r5, r4, [ip] @ Clear exclusive monitor
-#endif
-#endif
#if defined(CONFIG_HAS_TLS_REG)
mcr p15, 0, r3, c13, c0, 3 @ set TLS register
#elif !defined(CONFIG_TLS_REG_EMUL)
#ifndef CONFIG_THUMB2_KERNEL
.macro svc_exit, rpsr
msr spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+ ldr r0, [sp]
+ strex r1, r2, [sp] @ clear the exclusive monitor
+ ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
+#else
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+#endif
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+ strex r1, r2, [sp] @ clear the exclusive monitor
+#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
.else
.endm
#else /* CONFIG_THUMB2_KERNEL */
.macro svc_exit, rpsr
+ clrex @ clear the exclusive monitor
ldr r0, [sp, #S_SP] @ top of the stack
ldr r1, [sp, #S_PC] @ return address
tst r0, #4 @ orig stack 8-byte aligned?
.endm
.macro restore_user_regs, fast = 0, offset = 0
+ clrex @ clear the exclusive monitor
mov r2, sp
load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
*
* The things we do for performance..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
+#include <linux/stop_machine.h>
#include <linux/stringify.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
flush_insns(p->addr, 1);
}
+/*
+ * The actual disarming is done here on each CPU and synchronized using
+ * stop_machine. This synchronization is necessary on SMP to avoid removing
+ * a probe between the moment the 'Undefined Instruction' exception is raised
+ * and the moment the exception handler reads the faulting instruction from
+ * memory.
+ */
+int __kprobes __arch_disarm_kprobe(void *p)
+{
+ struct kprobe *kp = p;
+ *kp->addr = kp->opcode;
+ flush_insns(kp->addr, 1);
+ return 0;
+}
+
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
- *p->addr = p->opcode;
- flush_insns(p->addr, 1);
+ stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
#include "compat.h"
#include "atags.h"
+#include "tcm.h"
#ifndef MEM_SIZE
#define MEM_SIZE (16*1024*1024)
#endif
cpu_init();
+ tcm_init();
/*
* Set up various architecture-specific pointers
read_lock(&tasklist_lock);
for_each_process(p) {
if (p->mm)
- cpu_clear(cpu, p->mm->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
}
read_unlock(&tasklist_lock);
atomic_inc(&mm->mm_users);
atomic_inc(&mm->mm_count);
current->active_mm = mm;
- cpu_set(cpu, mm->cpu_vm_mask);
+ cpumask_set_cpu(cpu, mm_cpumask(mm));
cpu_switch_mm(mm->pgd, mm);
enter_lazy_tlb(mm, current);
local_flush_tlb_all();
void flush_tlb_mm(struct mm_struct *mm)
{
if (tlb_ops_need_broadcast())
- on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+ on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
else
local_flush_tlb_mm(mm);
}
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = uaddr;
- on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
} else
local_flush_tlb_page(vma, uaddr);
}
ta.ta_vma = vma;
ta.ta_start = start;
ta.ta_end = end;
- on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
} else
local_flush_tlb_range(vma, start, end);
}
#include <linux/mman.h>
#include <linux/fs.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/genalloc.h>
+#include <linux/string.h> /* memcpy */
+#include <asm/page.h> /* PAGE_SHIFT */
+#include <asm/cputype.h>
+#include <asm/mach/map.h>
+#include <mach/memory.h>
+#include "tcm.h"
+
+/* Scream and warn about misuse */
+#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
+ !defined(DTCM_OFFSET) || !defined(DTCM_END)
+#error "TCM support selected but offsets not defined!"
+#endif
+
+static struct gen_pool *tcm_pool;
+
+/* TCM section definitions from the linker */
+extern char __itcm_start, __sitcm_text, __eitcm_text;
+extern char __dtcm_start, __sdtcm_data, __edtcm_data;
+
+/*
+ * TCM memory resources
+ */
+static struct resource dtcm_res = {
+ .name = "DTCM RAM",
+ .start = DTCM_OFFSET,
+ .end = DTCM_END,
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource itcm_res = {
+ .name = "ITCM RAM",
+ .start = ITCM_OFFSET,
+ .end = ITCM_END,
+ .flags = IORESOURCE_MEM
+};
+
+static struct map_desc dtcm_iomap[] __initdata = {
+ {
+ .virtual = DTCM_OFFSET,
+ .pfn = __phys_to_pfn(DTCM_OFFSET),
+ .length = (DTCM_END - DTCM_OFFSET + 1),
+ .type = MT_UNCACHED
+ }
+};
+
+static struct map_desc itcm_iomap[] __initdata = {
+ {
+ .virtual = ITCM_OFFSET,
+ .pfn = __phys_to_pfn(ITCM_OFFSET),
+ .length = (ITCM_END - ITCM_OFFSET + 1),
+ .type = MT_UNCACHED
+ }
+};
+
+/*
+ * Allocate a chunk of TCM memory
+ */
+void *tcm_alloc(size_t len)
+{
+ unsigned long vaddr;
+
+ if (!tcm_pool)
+ return NULL;
+
+ vaddr = gen_pool_alloc(tcm_pool, len);
+ if (!vaddr)
+ return NULL;
+
+ return (void *) vaddr;
+}
+EXPORT_SYMBOL(tcm_alloc);
+
+/*
+ * Free a chunk of TCM memory
+ */
+void tcm_free(void *addr, size_t len)
+{
+ gen_pool_free(tcm_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(tcm_free);
+
+
+static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+{
+ const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
+ 256, 512, 1024, -1, -1, -1, -1 };
+ u32 tcm_region;
+ int tcm_size;
+
+ /* Read the special TCM region register c9, 0 */
+ if (!type)
+ asm("mrc p15, 0, %0, c9, c1, 0"
+ : "=r" (tcm_region));
+ else
+ asm("mrc p15, 0, %0, c9, c1, 1"
+ : "=r" (tcm_region));
+
+ tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
+ if (tcm_size < 0) {
+ pr_err("CPU: %sTCM of unknown size!\n",
+ type ? "I" : "D");
+ } else {
+ pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+ type ? "I" : "D",
+ tcm_size,
+ (tcm_region & 0xfffff000U),
+ (tcm_region & 1) ? "" : "not ");
+ }
+
+ if (tcm_size != expected_size) {
+ pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
+ type ? "I" : "D",
+ tcm_size,
+ expected_size);
+ /* Adjust to the expected size? what can we do... */
+ }
+
+ /* Force move the TCM bank to where we want it, enable */
+ tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+
+ if (!type)
+ asm("mcr p15, 0, %0, c9, c1, 0"
+ : /* No output operands */
+ : "r" (tcm_region));
+ else
+ asm("mcr p15, 0, %0, c9, c1, 1"
+ : /* No output operands */
+ : "r" (tcm_region));
+
+ pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
+ type ? "I" : "D",
+ tcm_size,
+ (tcm_region & 0xfffff000U));
+}
+
+/*
+ * This initializes the TCM memory
+ */
+void __init tcm_init(void)
+{
+ u32 tcm_status = read_cpuid_tcmstatus();
+ char *start;
+ char *end;
+ char *ram;
+
+ /* Setup DTCM if present */
+ if (tcm_status & (1 << 16)) {
+ setup_tcm_bank(0, DTCM_OFFSET,
+ (DTCM_END - DTCM_OFFSET + 1) >> 10);
+ request_resource(&iomem_resource, &dtcm_res);
+ iotable_init(dtcm_iomap, 1);
+ /* Copy data from RAM to DTCM */
+ start = &__sdtcm_data;
+ end = &__edtcm_data;
+ ram = &__dtcm_start;
+ memcpy(start, ram, (end-start));
+ pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+ }
+
+ /* Setup ITCM if present */
+ if (tcm_status & 1) {
+ setup_tcm_bank(1, ITCM_OFFSET,
+ (ITCM_END - ITCM_OFFSET + 1) >> 10);
+ request_resource(&iomem_resource, &itcm_res);
+ iotable_init(itcm_iomap, 1);
+ /* Copy code from RAM to ITCM */
+ start = &__sitcm_text;
+ end = &__eitcm_text;
+ ram = &__itcm_start;
+ memcpy(start, ram, (end-start));
+ pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+ }
+}
+
+/*
+ * This creates the TCM memory pool and has to be done later,
+ * during the core_initicalls, since the allocator is not yet
+ * up and running when the first initialization runs.
+ */
+static int __init setup_tcm_pool(void)
+{
+ u32 tcm_status = read_cpuid_tcmstatus();
+ u32 dtcm_pool_start = (u32) &__edtcm_data;
+ u32 itcm_pool_start = (u32) &__eitcm_text;
+ int ret;
+
+ /*
+ * Set up malloc pool, 2^2 = 4 bytes granularity since
+ * the TCM is sometimes just 4 KiB. NB: pages and cache
+ * line alignments does not matter in TCM!
+ */
+ tcm_pool = gen_pool_create(2, -1);
+
+ pr_debug("Setting up TCM memory pool\n");
+
+ /* Add the rest of DTCM to the TCM pool */
+ if (tcm_status & (1 << 16)) {
+ if (dtcm_pool_start < DTCM_END) {
+ ret = gen_pool_add(tcm_pool, dtcm_pool_start,
+ DTCM_END - dtcm_pool_start + 1, -1);
+ if (ret) {
+ pr_err("CPU DTCM: could not add DTCM " \
+ "remainder to pool!\n");
+ return ret;
+ }
+ pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
+ "the TCM memory pool\n",
+ DTCM_END - dtcm_pool_start + 1,
+ dtcm_pool_start);
+ }
+ }
+
+ /* Add the rest of ITCM to the TCM pool */
+ if (tcm_status & 1) {
+ if (itcm_pool_start < ITCM_END) {
+ ret = gen_pool_add(tcm_pool, itcm_pool_start,
+ ITCM_END - itcm_pool_start + 1, -1);
+ if (ret) {
+ pr_err("CPU ITCM: could not add ITCM " \
+ "remainder to pool!\n");
+ return ret;
+ }
+ pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
+ "the TCM memory pool\n",
+ ITCM_END - itcm_pool_start + 1,
+ itcm_pool_start);
+ }
+ }
+ return 0;
+}
+
+core_initcall(setup_tcm_pool);
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifdef CONFIG_HAVE_TCM
+void __init tcm_init(void);
+#else
+/* No TCM support, just blank inlines to be optimized out */
+inline void tcm_init(void)
+{
+}
+#endif
}
_edata_loc = __data_loc + SIZEOF(.data);
+#ifdef CONFIG_HAVE_TCM
+ /*
+ * We align everything to a page boundary so we can
+ * free it after init has commenced and TCM contents have
+ * been copied to its destination.
+ */
+ .tcm_start : {
+ . = ALIGN(PAGE_SIZE);
+ __tcm_start = .;
+ __itcm_start = .;
+ }
+
+ /*
+ * Link these to the ITCM RAM
+ * Put VMA to the TCM address and LMA to the common RAM
+ * and we'll upload the contents from RAM to TCM and free
+ * the used RAM after that.
+ */
+ .text_itcm ITCM_OFFSET : AT(__itcm_start)
+ {
+ __sitcm_text = .;
+ *(.tcm.text)
+ *(.tcm.rodata)
+ . = ALIGN(4);
+ __eitcm_text = .;
+ }
+
+ /*
+ * Reset the dot pointer, this is needed to create the
+ * relative __dtcm_start below (to be used as extern in code).
+ */
+ . = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+ .dtcm_start : {
+ __dtcm_start = .;
+ }
+
+ /* TODO: add remainder of ITCM as well, that can be used for data! */
+ .data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+ {
+ . = ALIGN(4);
+ __sdtcm_data = .;
+ *(.tcm.data)
+ . = ALIGN(4);
+ __edtcm_data = .;
+ }
+
+ /* Reset the dot pointer or the linker gets confused */
+ . = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+ /* End marker for freeing TCM copy in linked object */
+ .tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+ . = ALIGN(PAGE_SIZE);
+ __tcm_end = .;
+ }
+#endif
+
.bss : {
__bss_start = .; /* BSS */
*(.bss)
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/cache.h>
-#define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
+#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
.text
.align 5
ENTRY(copy_page)
stmfd sp!, {r4, lr} @ 2
PLD( pld [r1, #0] )
- PLD( pld [r1, #32] )
+ PLD( pld [r1, #L1_CACHE_BYTES] )
mov r2, #COPY_COUNT @ 1
ldmia r1!, {r3, r4, ip, lr} @ 4+1
-1: PLD( pld [r1, #64] )
- PLD( pld [r1, #96] )
-2: stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
+1: PLD( pld [r1, #2 * L1_CACHE_BYTES])
+ PLD( pld [r1, #3 * L1_CACHE_BYTES])
+2:
+ .rept (2 * L1_CACHE_BYTES / 16 - 1)
stmia r0!, {r3, r4, ip, lr} @ 4
ldmia r1!, {r3, r4, ip, lr} @ 4
+ .endr
subs r2, r2, #1 @ 1
stmia r0!, {r3, r4, ip, lr} @ 4
ldmgtia r1!, {r3, r4, ip, lr} @ 4
* AC97
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
};
static struct platform_device at91cap9_ac97_device = {
- .name = "ac97c",
+ .name = "atmel_ac97c",
.id = 1,
.dev = {
.dma_mask = &ac97_dmamask,
.num_resources = ARRAY_SIZE(ac97_resources),
};
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
platform_device_register(&at91cap9_ac97_device);
}
#else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * CAN Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
+static struct resource can_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_CAN,
+ .end = AT91SAM9263_BASE_CAN + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_CAN,
+ .end = AT91SAM9263_ID_CAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_can_device = {
+ .name = "at91_can",
+ .id = -1,
+ .resource = can_resources,
+ .num_resources = ARRAY_SIZE(can_resources),
+};
+
+void __init at91_add_device_can(struct at91_can_data *data)
+{
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */
+ at91sam9263_can_device.dev.platform_data = data;
+
+ platform_device_register(&at91sam9263_can_device);
+}
+#else
+void __init at91_add_device_can(struct at91_can_data *data) {}
+#endif
/* --------------------------------------------------------------------
* LCD Controller
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
#include "generic.h"
+/* --------------------------------------------------------------------
+ * HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+ .nr_channels = 8,
+};
+
+static struct resource hdmac_resources[] = {
+ [0] = {
+ .start = AT91_BASE_SYS + AT91_DMA,
+ .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9G45_ID_DMA,
+ .end = AT91SAM9G45_ID_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at_hdmac_device = {
+ .name = "at_hdmac",
+ .id = -1,
+ .dev = {
+ .dma_mask = &hdmac_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &atdma_pdata,
+ },
+ .resource = hdmac_resources,
+ .num_resources = ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+ dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+ dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+ platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+
/* --------------------------------------------------------------------
* USB Host (OHCI)
* -------------------------------------------------------------------- */
#endif
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_AC97C,
+ .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AC97C,
+ .end = AT91SAM9G45_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ac97_device = {
+ .name = "atmel_ac97c",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91sam9g45_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
#include "generic.h"
+/* --------------------------------------------------------------------
+ * HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+ .nr_channels = 2,
+};
+
+static struct resource hdmac_resources[] = {
+ [0] = {
+ .start = AT91_BASE_SYS + AT91_DMA,
+ .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9RL_ID_DMA,
+ .end = AT91SAM9RL_ID_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at_hdmac_device = {
+ .name = "at_hdmac",
+ .id = -1,
+ .dev = {
+ .dma_mask = &hdmac_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &atdma_pdata,
+ },
+ .resource = hdmac_resources,
+ .num_resources = ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+ dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+ platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#endif
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_AC97C,
+ .end = AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_AC97C,
+ .end = AT91SAM9RL_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ac97_device = {
+ .name = "atmel_ac97c",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PD2, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91sam9rl_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();
/*
* AC97
*/
-static struct atmel_ac97_data cap9adk_ac97_data = {
+static struct ac97c_platform_data cap9adk_ac97_data = {
// .reset_pin = ... not connected
};
/*
* AC97
*/
-static struct atmel_ac97_data neocore926_ac97_data = {
+static struct ac97c_platform_data neocore926_ac97_data = {
.reset_pin = AT91_PIN_PA13,
};
}
};
+/*
+ * CAN
+ */
+static void sam9263ek_transceiver_switch(int on)
+{
+ if (on) {
+ at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
+ at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
+ } else {
+ at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
+ at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
+ }
+}
+
+static struct at91_can_data ek_can_data = {
+ .transceiver_switch = sam9263ek_transceiver_switch,
+};
static void __init ek_board_init(void)
{
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+ /* CAN */
+ at91_add_device_can(&ek_can_data);
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
#endif
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
/*
* LEDs ... these could all be PWM-driven, for variable brightness
*/
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
ek_add_device_buttons();
+ /* AC97 */
+ at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
#endif
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
/*
* LEDs
*/
at91_add_device_mmc(0, &ek_mmc_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
+ /* AC97 */
+ at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller */
at91_add_device_tsadcc();
/* LEDs */
/* Touchscreen Controller */
extern void __init at91_add_device_tsadcc(void);
+/* CAN */
+struct at91_can_data {
+ void (*transceiver_switch)(int on);
+};
+extern void __init at91_add_device_can(struct at91_can_data *data);
+
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/clkdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
return status & 8;
}
-static struct mmc_platform_data mmc_data = {
+static struct mmci_platform_data mmc_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
return 16;
}
+#define iop_adma_get_max_pq iop_adma_get_max_xor
+
static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
{
return __raw_readl(ADMA_ADAR(chan));
#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+#define iop_chan_pq_slot_count iop_chan_xor_slot_count
+#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count
static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
return hw_desc->dest_addr;
}
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ return hw_desc->q_dest_addr;
+}
+
static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
return 1;
}
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.src_select = src_cnt - 1;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.pq_xfer_en = 1;
+ u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = hw_desc->desc_ctrl;
+ return u_desc_ctrl.field.pq_xfer_en;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.src_select = src_cnt - 1;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.zero_result = 1;
+ u_desc_ctrl.field.status_write_back_en = 1;
+ u_desc_ctrl.field.pq_xfer_en = 1;
+ u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan,
u32 byte_count)
}
}
+#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count
static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan,
hw_desc->upper_dest_addr = 0;
}
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+
+ hw_desc->dest_addr = addr[0];
+ hw_desc->q_dest_addr = addr[1];
+ hw_desc->upper_dest_addr = 0;
+}
+
static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
dma_addr_t addr)
{
} while (slot_cnt);
}
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+ dma_addr_t addr, unsigned char coef)
+{
+ int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+ struct iop13xx_adma_src *src;
+ int i = 0;
+
+ do {
+ iter = iop_hw_desc_slot_idx(hw_desc, i);
+ src = &iter->src[src_idx];
+ src->src_addr = addr;
+ src->pq_upper_src_addr = 0;
+ src->pq_dmlt = coef;
+ slot_cnt -= slots_per_op;
+ if (slot_cnt) {
+ i += slots_per_op;
+ addr += IOP_ADMA_PQ_MAX_BYTE_COUNT;
+ }
+ } while (slot_cnt);
+}
+
static inline void
iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
}
#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+ dma_addr_t *src)
+{
+ iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]);
+ iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]);
+}
static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
u32 next_desc_addr)
hw_desc->block_fill_data = val;
}
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+ enum sum_check_flags flags;
BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
- if (desc_ctrl.pq_xfer_en)
- return byte_count.zero_result_err_q;
- else
- return byte_count.zero_result_err;
+ flags = byte_count.zero_result_err_q << SUM_CHECK_Q;
+ flags |= byte_count.zero_result_err << SUM_CHECK_P;
+
+ return flags;
}
static inline void iop_chan_append(struct iop_adma_chan *chan)
plat_data = &iop13xx_adma_0_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
break;
case IOP13XX_INIT_ADMA_1:
plat_data = &iop13xx_adma_1_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
break;
case IOP13XX_INIT_ADMA_2:
plat_data = &iop13xx_adma_2_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
- dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
- dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_PQ, plat_data->cap_mask);
+ dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
break;
}
}
config CPU_PXA935
bool "PXA935 (codename Tavor-P65)"
+ select CPU_PXA930
+
+config CPU_PXA950
+ bool "PXA950 (codename Tavor-PV2)"
+ select CPU_PXA930
endmenu
bool "Nec Mobilepro 900/c"
select PXA25x
+config MACH_BALLOON3
+ bool "Balloon 3 board"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
+config MACH_PALMTC
+ bool "Palm Tungsten|C"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|C
+ handheld computer.
+
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
select PXA27x
select IWMMXT
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
+config MACH_XCEP
+ bool "Iskratel Electronics XCEP"
+ select PXA25x
+ select MTD
+ select MTD_PARTITIONS
+ select MTD_PHYSMAP
+ select MTD_CFI_INTELEXT
+ select MTD_CFI
+ select MTD_CHAR
+ select SMC91X
+ select PXA_SSP
+ help
+ PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+ Tuned for usage in Libera instruments for particle accelerators.
+
endmenu
config PXA25x
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
+obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
+obj-$(CONFIG_MACH_XCEP) += xcep.o
+
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/balloon3.c
+ *
+ * Support for Balloonboard.org Balloon3 board.
+ *
+ * Author: Nick Bane, Wookey, Jonathan McDowell
+ * Created: June, 2006
+ * Copyright: Toby Churchill Ltd
+ * Derived from mainstone.c, by Nico Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+ (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+ (1 << BALLOON3_FEATURE_AUDIO) |
+ (1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+ return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+ if (!arg)
+ return 0;
+
+ return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+static void balloon3_mask_irq(unsigned int irq)
+{
+ int balloon3_irq = (irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled &= ~(1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+ int balloon3_irq = (irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled |= (1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+ .name = "FPGA",
+ .ack = balloon3_mask_irq,
+ .mask = balloon3_mask_irq,
+ .unmask = balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+
+ do {
+ /* clear useless edge notification */
+ if (desc->chip->ack)
+ desc->chip->ack(BALLOON3_AUX_NIRQ);
+ while (pending) {
+ irq = BALLOON3_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+ pending &= pending - 1;
+ }
+ pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+ } while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+ int irq;
+
+ pxa27x_init_irq();
+ /* setup extra Balloon3 irqs */
+ for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+ set_irq_chip(irq, &balloon3_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+ set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+ pr_debug("%s: chained handler installed - irq %d automatically "
+ "enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+static void balloon3_backlight_power(int on)
+{
+ pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
+ gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static unsigned long balloon3_lcd_pin_config[] = {
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ GPIO99_GPIO, /* Backlight */
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+ {
+ .pixclock = 38000,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 2,
+ .upper_margin = 4,
+ .lower_margin = 5,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info balloon3_pxafb_info = {
+ .modes = balloon3_lcd_modes,
+ .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_backlight_power = balloon3_backlight_power,
+};
+
+static unsigned long balloon3_mmc_pin_config[] = {
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+};
+
+static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask) {
+ pr_debug("%s: on\n", __func__);
+ /* FIXME something to prod here? */
+ } else {
+ pr_debug("%s: off\n", __func__);
+ /* FIXME something to prod here? */
+ }
+}
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .setpower = balloon3_mci_setpower,
+};
+
+static int balloon3_udc_is_connected(void)
+{
+ pr_debug("%s: udc connected\n", __func__);
+ return 1;
+}
+
+static void balloon3_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
+ pr_debug("%s: connect\n", __func__);
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ UP2OCR &= ~UP2OCR_DPPUE;
+ pr_debug("%s: disconnect\n", __func__);
+ break;
+ }
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info = {
+ .udc_is_connected = balloon3_udc_is_connected,
+ .udc_command = balloon3_udc_command,
+};
+
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+};
+
+static unsigned long balloon3_ohci_pin_config[] = {
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static unsigned long balloon3_pin_config[] __initdata = {
+ /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Wakeup GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* NAND & IDLE LED GPIOs */
+ GPIO9_GPIO,
+ GPIO10_GPIO,
+};
+
+static struct gpio_led balloon3_gpio_leds[] = {
+ {
+ .name = "balloon3:green:idle",
+ .default_trigger = "heartbeat",
+ .gpio = BALLOON3_GPIO_LED_IDLE,
+ .active_low = 1,
+ },
+ {
+ .name = "balloon3:green:nand",
+ .default_trigger = "nand-disk",
+ .gpio = BALLOON3_GPIO_LED_NAND,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+ .leds = balloon3_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &balloon3_gpio_leds_platform_data,
+ },
+};
+
+static void __init balloon3_init(void)
+{
+ pr_info("Initialising Balloon3\n");
+
+ /* system bus arbiter setting
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ pxa_set_i2c_info(NULL);
+ if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+ pxa_set_ac97_info(NULL);
+
+ if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+ gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
+ "LCD Backlight Power");
+ gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+ set_pxa_fb_info(&balloon3_pxafb_info);
+ }
+
+ if (balloon3_has(BALLOON3_FEATURE_MMC)) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+ pxa_set_mci_info(&balloon3_mci_platform_data);
+ }
+ pxa_set_ficp_info(&balloon3_ficp_platform_data);
+ if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
+ pxa_set_ohci_info(&balloon3_ohci_platform_data);
+ }
+ pxa_set_udc_info(&balloon3_udc_info);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+ platform_device_register(&balloon3led_device);
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+ { /* CPLD/FPGA */
+ .virtual = BALLOON3_FPGA_VIRT,
+ .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS),
+ .length = BALLOON3_FPGA_LENGTH,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init balloon3_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+ /* Maintainer: Nick Bane. */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = balloon3_map_io,
+ .init_irq = balloon3_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = balloon3_init,
+ .boot_params = PHYS_OFFSET + 0x100,
+MACHINE_END
unsigned int cken;
unsigned int delay;
unsigned int enabled;
- struct clk *other;
};
#define INIT_CLKREG(_clk,_devname,_conname) \
#include <linux/sysdev.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+
#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
#include "generic.h"
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP (19)
+#define GPIO102_WLAN_RST (102)
+
static unsigned long cmx270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO26_SSP1_RXD,
/* SSP2 */
- GPIO19_SSP2_SCLK,
- GPIO14_SSP2_SFRM,
+ GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
+ GPIO14_GPIO,
GPIO87_SSP2_TXD,
GPIO88_SSP2_RXD,
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
GPIO53_GPIO, /* PC card reset */
+ GPIO102_GPIO, /* WLAN reset */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
/* interrupts */
GPIO10_GPIO, /* DM9000 interrupt */
GPIO83_GPIO, /* MMC card detect */
+ GPIO95_GPIO, /* WLAN interrupt */
};
/* V3020 RTC */
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static int cmx270_mci_init(struct device *dev,
- irq_handler_t cmx270_detect_int,
- void *data)
+static struct pxamci_platform_data cmx270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO83_MMC_IRQ,
+ .gpio_card_ro = -1,
+ .gpio_power = GPIO105_MMC_POWER,
+ .gpio_power_invert = 1,
+};
+
+static void __init cmx270_init_mmc(void)
{
- int err;
+ pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .timeout = 1000,
+ .gpio_cs = 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_GPIO,
+ GPIO87_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+};
- err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
- if (err) {
- dev_warn(dev, "power gpio unavailable\n");
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+ int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+ if (err)
return err;
- }
- gpio_direction_output(GPIO105_MMC_POWER, 0);
+ err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+ if (err)
+ goto err_free_strap;
- err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- gpio_free(GPIO105_MMC_POWER);
- dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
- " request MMC card detect IRQ\n");
- }
+ err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+ if (err)
+ goto err_free_strap;
+ msleep(100);
+
+ err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+ if (err)
+ goto err_free_strap;
+ msleep(100);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+ gpio_set_value(GPIO102_WLAN_RST, 1);
+ msleep(100);
+
+ spi->bits_per_word = 16;
+ spi_setup(spi);
+
+ return 0;
+
+err_free_strap:
+ gpio_free(GPIO19_WLAN_STRAP);
return err;
}
-static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
+static int cm_x270_libertas_teardown(struct spi_device *spi)
{
- struct pxamci_platform_data *p_d = dev->platform_data;
-
- if ((1 << vdd) & p_d->ocr_mask) {
- dev_dbg(dev, "power on\n");
- gpio_set_value(GPIO105_MMC_POWER, 0);
- } else {
- gpio_set_value(GPIO105_MMC_POWER, 1);
- dev_dbg(dev, "power off\n");
- }
-}
+ gpio_set_value(GPIO102_WLAN_RST, 0);
+ gpio_free(GPIO102_WLAN_RST);
+ gpio_free(GPIO19_WLAN_STRAP);
-static void cmx270_mci_exit(struct device *dev, void *data)
-{
- free_irq(CMX270_MMC_IRQ, data);
- gpio_free(GPIO105_MMC_POWER);
+ return 0;
}
-static struct pxamci_platform_data cmx270_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cmx270_mci_init,
- .setpower = cmx270_mci_setpower,
- .exit = cmx270_mci_exit,
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+ .use_dummy_writes = 1,
+ .setup = cm_x270_libertas_setup,
+ .teardown = cm_x270_libertas_teardown,
};
-static void __init cmx270_init_mmc(void)
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+ {
+ .modalias = "libertas_spi",
+ .max_speed_hz = 13000000,
+ .bus_num = 2,
+ .irq = gpio_to_irq(95),
+ .chip_select = 0,
+ .controller_data = &cm_x270_libertas_chip,
+ .platform_data = &cm_x270_libertas_pdata,
+ },
+};
+
+static void __init cmx270_init_spi(void)
{
- pxa_set_mci_info(&cmx270_mci_platform_data);
+ pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
}
#else
-static inline void cmx270_init_mmc(void) {}
+static inline void cmx270_init_spi(void) {}
#endif
void __init cmx270_init(void)
cmx270_init_mmc();
cmx270_init_ohci();
cmx270_init_2700G();
+ cmx270_init_spi();
}
}
static struct pxamci_platform_data cm_x300_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci_init,
- .exit = cm_x300_mci_exit,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = cm_x300_mci_init,
+ .exit = cm_x300_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
-static int cm_x300_mci2_ro(struct device *dev)
-{
- return gpio_get_value(GPIO85_MMC2_WP);
-}
-
-static int cm_x300_mci2_init(struct device *dev,
- irq_handler_t cm_x300_detect_int,
- void *data)
-{
- int err;
-
- /*
- * setup GPIO for CM-X300 MMC controller
- */
- err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
- if (err)
- goto err_request_cd;
- gpio_direction_input(GPIO82_MMC2_IRQ);
-
- err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
- if (err)
- goto err_request_wp;
- gpio_direction_input(GPIO85_MMC2_WP);
-
- err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: MMC/SD/SDIO: "
- "can't request card detect IRQ\n", __func__);
- goto err_request_irq;
- }
-
- return 0;
-
-err_request_irq:
- gpio_free(GPIO85_MMC2_WP);
-err_request_wp:
- gpio_free(GPIO82_MMC2_IRQ);
-err_request_cd:
- return err;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
- free_irq(CM_X300_MMC2_IRQ, data);
- gpio_free(GPIO82_MMC2_IRQ);
- gpio_free(GPIO85_MMC2_WP);
-}
-
static struct pxamci_platform_data cm_x300_mci2_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci2_init,
- .exit = cm_x300_mci2_exit,
- .get_ro = cm_x300_mci2_ro,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO82_MMC2_IRQ,
+ .gpio_card_ro = GPIO85_MMC2_WP,
+ .gpio_power = -1,
};
static void __init cm_x300_init_mmc(void)
{
colibri_pxa300_init_eth();
colibri_pxa300_init_ohci();
+ colibri_pxa3xx_init_nand();
colibri_pxa300_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
colibri_pxa310_init_ac97();
static inline void colibri_pxa320_init_ac97(void) {}
#endif
+/*
+ * The following configuration is verified to work with the Toradex Orchid
+ * carrier board
+ */
+static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
+ /* UART 1 configuration (may be set by bootloader) */
+ GPIO99_UART1_CTS,
+ GPIO104_UART1_RTS,
+ GPIO97_UART1_RXD,
+ GPIO98_UART1_TXD,
+ GPIO101_UART1_DTR,
+ GPIO103_UART1_DSR,
+ GPIO100_UART1_DCD,
+ GPIO102_UART1_RI,
+
+ /* UART 2 configuration */
+ GPIO109_UART2_CTS,
+ GPIO112_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+
+ /* UART 3 configuration */
+ GPIO30_UART3_RXD,
+ GPIO31_UART3_TXD,
+};
+
+static void __init colibri_pxa320_init_uart(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
+}
+
void __init colibri_pxa320_init(void)
{
colibri_pxa320_init_eth();
colibri_pxa320_init_ohci();
+ colibri_pxa3xx_init_nand();
colibri_pxa320_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
colibri_pxa320_init_ac97();
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
+ colibri_pxa320_init_uart();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
#include <mach/colibri.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
+#include <mach/pxa3xx_nand.h>
#include "generic.h"
#include "devices.h"
}
static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = colibri_pxa3xx_mci_init,
- .exit = colibri_pxa3xx_mci_exit,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = colibri_pxa3xx_mci_init,
+ .exit = colibri_pxa3xx_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
}
#endif
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition colibri_nand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "fs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .parts = colibri_nand_partitions,
+ .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+ pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
#include <video/w100fb.h>
#include <asm/setup.h>
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
+ /* GPIO Matrix Keypad */
+ GPIO66_GPIO, /* column 0 */
+ GPIO67_GPIO, /* column 1 */
+ GPIO68_GPIO, /* column 2 */
+ GPIO69_GPIO, /* column 3 */
+ GPIO70_GPIO, /* column 4 */
+ GPIO71_GPIO, /* column 5 */
+ GPIO72_GPIO, /* column 6 */
+ GPIO73_GPIO, /* column 7 */
+ GPIO74_GPIO, /* column 8 */
+ GPIO75_GPIO, /* column 9 */
+ GPIO76_GPIO, /* column 10 */
+ GPIO77_GPIO, /* column 11 */
+ GPIO58_GPIO, /* row 0 */
+ GPIO59_GPIO, /* row 1 */
+ GPIO60_GPIO, /* row 2 */
+ GPIO61_GPIO, /* row 3 */
+ GPIO62_GPIO, /* row 4 */
+ GPIO63_GPIO, /* row 5 */
+ GPIO64_GPIO, /* row 6 */
+ GPIO65_GPIO, /* row 7 */
+
/* GPIO */
GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
/*
* Corgi Keyboard Device
*/
+#define CORGI_KEY_CALENDER KEY_F1
+#define CORGI_KEY_ADDRESS KEY_F2
+#define CORGI_KEY_FN KEY_F3
+#define CORGI_KEY_CANCEL KEY_F4
+#define CORGI_KEY_OFF KEY_SUSPEND
+#define CORGI_KEY_EXOK KEY_F5
+#define CORGI_KEY_EXCANCEL KEY_F6
+#define CORGI_KEY_EXJOGDOWN KEY_F7
+#define CORGI_KEY_EXJOGUP KEY_F8
+#define CORGI_KEY_JAP1 KEY_LEFTCTRL
+#define CORGI_KEY_JAP2 KEY_LEFTALT
+#define CORGI_KEY_MAIL KEY_F10
+#define CORGI_KEY_OK KEY_F11
+#define CORGI_KEY_MENU KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+ KEY(0, 1, KEY_1),
+ KEY(0, 2, KEY_3),
+ KEY(0, 3, KEY_5),
+ KEY(0, 4, KEY_6),
+ KEY(0, 5, KEY_7),
+ KEY(0, 6, KEY_9),
+ KEY(0, 7, KEY_0),
+ KEY(0, 8, KEY_BACKSPACE),
+ KEY(1, 1, KEY_2),
+ KEY(1, 2, KEY_4),
+ KEY(1, 3, KEY_R),
+ KEY(1, 4, KEY_Y),
+ KEY(1, 5, KEY_8),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_O),
+ KEY(1, 8, KEY_P),
+ KEY(2, 0, KEY_TAB),
+ KEY(2, 1, KEY_Q),
+ KEY(2, 2, KEY_E),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_G),
+ KEY(2, 5, KEY_U),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_K),
+ KEY(3, 0, CORGI_KEY_CALENDER),
+ KEY(3, 1, KEY_W),
+ KEY(3, 2, KEY_S),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_V),
+ KEY(3, 5, KEY_H),
+ KEY(3, 6, KEY_M),
+ KEY(3, 7, KEY_L),
+ KEY(3, 9, KEY_RIGHTSHIFT),
+ KEY(4, 0, CORGI_KEY_ADDRESS),
+ KEY(4, 1, KEY_A),
+ KEY(4, 2, KEY_D),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_B),
+ KEY(4, 5, KEY_N),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 8, KEY_ENTER),
+ KEY(4, 10, KEY_LEFTSHIFT),
+ KEY(5, 0, CORGI_KEY_MAIL),
+ KEY(5, 1, KEY_Z),
+ KEY(5, 2, KEY_X),
+ KEY(5, 3, KEY_MINUS),
+ KEY(5, 4, KEY_SPACE),
+ KEY(5, 5, KEY_COMMA),
+ KEY(5, 7, KEY_UP),
+ KEY(5, 11, CORGI_KEY_FN),
+ KEY(6, 0, KEY_SYSRQ),
+ KEY(6, 1, CORGI_KEY_JAP1),
+ KEY(6, 2, CORGI_KEY_JAP2),
+ KEY(6, 3, CORGI_KEY_CANCEL),
+ KEY(6, 4, CORGI_KEY_OK),
+ KEY(6, 5, CORGI_KEY_MENU),
+ KEY(6, 6, KEY_LEFT),
+ KEY(6, 7, KEY_DOWN),
+ KEY(6, 8, KEY_RIGHT),
+ KEY(7, 0, CORGI_KEY_OFF),
+ KEY(7, 1, CORGI_KEY_EXOK),
+ KEY(7, 2, CORGI_KEY_EXCANCEL),
+ KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+ KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+ .keymap = corgikbd_keymap,
+ .keymap_size = ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+ { 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+ { 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+ .keymap_data = &corgikbd_keymap_data,
+ .row_gpios = corgikbd_row_gpios,
+ .col_gpios = corgikbd_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
static struct platform_device corgikbd_device = {
- .name = "corgi-keyboard",
+ .name = "matrix-keypad",
.id = -1,
+ .dev = {
+ .platform_data = &corgikbd_pdata,
+ },
};
/*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-static struct pxamci_platform_data corgi_mci_platform_data;
-
-static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
-{
- int err;
-
- err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
- if (err)
- goto err_out;
-
- err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
- if (err)
- goto err_free_1;
-
- err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
- if (err)
- goto err_free_2;
-
- gpio_direction_input(CORGI_GPIO_nSD_DETECT);
- gpio_direction_input(CORGI_GPIO_nSD_WP);
- gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
-
- corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
- __func__);
- goto err_free_3;
- }
- return 0;
-
-err_free_3:
- gpio_free(CORGI_GPIO_SD_PWR);
-err_free_2:
- gpio_free(CORGI_GPIO_nSD_WP);
-err_free_1:
- gpio_free(CORGI_GPIO_nSD_DETECT);
-err_out:
- return err;
-}
-
-static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data* p_d = dev->platform_data;
-
- gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
-}
-
-static int corgi_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(CORGI_GPIO_nSD_WP);
-}
-
-static void corgi_mci_exit(struct device *dev, void *data)
-{
- free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
- gpio_free(CORGI_GPIO_SD_PWR);
- gpio_free(CORGI_GPIO_nSD_WP);
- gpio_free(CORGI_GPIO_nSD_DETECT);
-}
-
static struct pxamci_platform_data corgi_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = corgi_mci_init,
- .get_ro = corgi_mci_get_ro,
- .setpower = corgi_mci_setpower,
- .exit = corgi_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = CORGI_GPIO_nSD_WP,
+ .gpio_power = CORGI_GPIO_SD_PWR,
};
/*
* Irda
*/
-static void corgi_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int corgi_irda_startup(struct device *dev)
-{
- int err;
-
- err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
- if (err)
- return err;
-
- gpio_direction_output(CORGI_GPIO_IR_ON, 1);
- return 0;
-}
-
-static void corgi_irda_shutdown(struct device *dev)
-{
- gpio_free(CORGI_GPIO_IR_ON);
-}
-
static struct pxaficp_platform_data corgi_ficp_platform_data = {
+ .gpio_pwdown = CORGI_GPIO_IR_ON,
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = corgi_irda_transceiver_mode,
- .startup = corgi_irda_startup,
- .shutdown = corgi_irda_shutdown,
};
corgi_init_spi();
pxa_set_udc_info(&udc_info);
+ corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
static int csb726_mci_init(struct device *dev,
irq_handler_t detect, void *data)
{
- int err;
-
csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-
- err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
- if (err)
- goto err_det_req;
-
- err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
- if (err)
- goto err_det_dir;
-
- err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
- if (err)
- goto err_ro_req;
-
- err = gpio_direction_input(CSB726_GPIO_MMC_RO);
- if (err)
- goto err_ro_dir;
-
- err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
- IRQF_DISABLED, "MMC card detect", data);
- if (err)
- goto err_irq;
-
return 0;
-
-err_irq:
-err_ro_dir:
- gpio_free(CSB726_GPIO_MMC_RO);
-err_ro_req:
-err_det_dir:
- gpio_free(CSB726_GPIO_MMC_DETECT);
-err_det_req:
- return err;
-}
-
-static int csb726_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(CSB726_GPIO_MMC_RO);
-}
-
-static void csb726_mci_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
- gpio_free(CSB726_GPIO_MMC_RO);
- gpio_free(CSB726_GPIO_MMC_DETECT);
}
static struct pxamci_platform_data csb726_mci = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = csb726_mci_init,
- .get_ro = csb726_mci_get_ro,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = csb726_mci_init,
/* FIXME setpower */
- .exit = csb726_mci_exit,
+ .gpio_card_detect = CSB726_GPIO_MMC_DETECT,
+ .gpio_card_ro = CSB726_GPIO_MMC_RO,
+ .gpio_power = -1,
};
static struct pxaohci_platform_data csb726_ohci_platform_data = {
{
pxa_register_device(&pxa3xx_device_nand, info);
}
+
+static struct resource pxa3xx_resources_gcu[] = {
+ {
+ .start = 0x54000000,
+ .end = 0x54000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_GCU,
+ .end = IRQ_GCU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+ .name = "pxa3xx-gcu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
+ .resource = pxa3xx_resources_gcu,
+ .dev = {
+ .dma_mask = &pxa3xx_gcu_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
#endif /* CONFIG_PXA3xx */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
extern struct platform_device pxa3xx_device_nand;
extern struct platform_device pxa3xx_device_i2c_power;
+extern struct platform_device pxa3xx_device_gcu;
+
void __init pxa_register_device(struct platform_device *dev, void *data);
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
- e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
- e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
- .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
- MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
- MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
- MMC_VDD_30_31|MMC_VDD_31_32,
- .init = em_x270_mci_init,
- .setpower = em_x270_mci_setpower,
- .exit = em_x270_mci_exit,
+ .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32,
+ .init = em_x270_mci_init,
+ .setpower = em_x270_mci_setpower,
+ .exit = em_x270_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init em_x270_init_mmc(void)
return 0;
}
-static struct soc_camera_link iclink = {
- .bus_id = 0,
- .power = em_x270_sensor_power,
-};
-
static struct i2c_board_info em_x270_i2c_cam_info[] = {
{
I2C_BOARD_INFO("mt9m111", 0x48),
+ },
+};
+
+static struct soc_camera_link iclink = {
+ .bus_id = 0,
+ .power = em_x270_sensor_power,
+ .board_info = &em_x270_i2c_cam_info[0],
+ .i2c_adapter_id = 0,
+ .module_name = "mt9m111",
+};
+
+static struct platform_device em_x270_camera = {
+ .name = "soc-camera-pdrv",
+ .id = -1,
+ .dev = {
.platform_data = &iclink,
},
};
static void __init em_x270_init_camera(void)
{
- i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
pxa_set_camera_info(&em_x270_camera_platform_data);
+ platform_device_register(&em_x270_camera);
}
#else
static inline void em_x270_init_camera(void) {}
REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
static struct regulator_init_data _ldo##_data = { \
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
struct led_info em_x270_led_info = {
.name = "em-x270:orange",
DA9030_LDO(12),
DA9030_LDO(19),
+ DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
static void __init em_x270_module_init(void)
{
- pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
mmc_cd = GPIO13_MMC_CD;
static void __init em_x270_exeda_init(void)
{
- pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
mmc_cd = GPIO114_MMC_CD;
.gpio_pullup_inverted = 1
};
-static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
-{
- if (mode & IR_OFF) {
- gpio_set_value(GPIO_E7XX_IR_OFF, 1);
- pxa2xx_transceiver_mode(dev, mode);
- } else {
- pxa2xx_transceiver_mode(dev, mode);
- gpio_set_value(GPIO_E7XX_IR_OFF, 0);
- }
-}
-
-int e7xx_irda_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
- if (ret)
- goto out;
-
- ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
- if (ret)
- goto out;
-
- e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
-out:
- return ret;
-}
-
-static void e7xx_irda_shutdown(struct device *dev)
-{
- e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
- gpio_free(GPIO_E7XX_IR_OFF);
-}
-
struct pxaficp_platform_data e7xx_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = e7xx_irda_transceiver_mode,
- .shutdown = e7xx_irda_shutdown,
+ .gpio_pwdown = GPIO_E7XX_IR_OFF,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
int eseries_tmio_enable(struct platform_device *dev)
#ifdef CONFIG_MMC_PXA
static struct pxamci_platform_data gumstix_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init gumstix_mmc_init(void)
#include <mach/irda.h>
#include <mach/pxa2xx_spi.h>
+#include <video/platform_lcd.h>
#include <video/w100fb.h>
#include "devices.h"
* IRDA
*/
-static void irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
-}
-
static struct pxaficp_platform_data ficp_info = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = irda_transceiver_mode,
+ .gpio_pwdown = GPIO105_HX4700_nIR_ON,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
* LCD - Sony display connected to ATI Imageon w3220
*/
-static int lcd_power;
-
static void sony_lcd_init(void)
{
gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
}
-static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
-{
- switch (level) {
- case FB_BLANK_UNBLANK:
- sony_lcd_init();
- break;
- case FB_BLANK_NORMAL:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_POWERDOWN:
- sony_lcd_off();
- break;
- }
- lcd_power = level;
- return 0;
-}
-
-static int hx4700_lcd_get_power(struct lcd_device *lm)
-{
- return lcd_power;
-}
-
-static struct lcd_ops hx4700_lcd_ops = {
- .get_power = hx4700_lcd_get_power,
- .set_power = hx4700_lcd_set_power,
-};
-
-static struct lcd_device *hx4700_lcd_device;
-
#ifdef CONFIG_PM
static void w3220_lcd_suspend(struct w100fb_par *wfb)
{
.resource = w3220_resources,
};
+static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+ if (power)
+ sony_lcd_init();
+ else
+ sony_lcd_off();
+}
+
+static struct plat_lcd_data hx4700_lcd_data = {
+ .set_power = hx4700_lcd_set_power,
+};
+
+static struct platform_device hx4700_lcd = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev = {
+ .platform_data = &hx4700_lcd_data,
+ .parent = &w3220.dev,
+ },
+};
+
/*
* Backlight
*/
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
- hx4700_lcd_device = lcd_device_register("w100fb", NULL,
- (void *)&w3220_info, &hx4700_lcd_ops);
-
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
mdelay(10);
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
};
static struct pxamci_platform_data idp_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init idp_init(void)
static struct pxamci_platform_data imote2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
.get_ro = imote2_mci_get_ro,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static struct mtd_partition imote2flash_partitions[] = {
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/balloon3.h
+ *
+ * Authors: Nick Bane and Wookey
+ * Created: Oct, 2005
+ * Copyright: Toby Churchill Ltd
+ * Cribbed from mainstone.c, by Nicholas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_BALLOON3_H
+#define ASM_ARCH_BALLOON3_H
+
+enum balloon3_features {
+ BALLOON3_FEATURE_OHCI,
+ BALLOON3_FEATURE_MMC,
+ BALLOON3_FEATURE_CF,
+ BALLOON3_FEATURE_AUDIO,
+ BALLOON3_FEATURE_TOPPOLY,
+};
+
+#define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
+#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
+#define BALLOON3_FPGA_LENGTH 0x01000000
+
+/* FPGA/CPLD registers */
+#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+/* fixme - same for now */
+#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+/* fpga/cpld interrupt control register */
+#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
+#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
+#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
+
+#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
+#define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
+#define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
+
+/* GPIOs for irqs */
+#define BALLOON3_GPIO_AUX_NIRQ (94)
+#define BALLOON3_GPIO_CODEC_IRQ (95)
+
+/* Timer and Idle LED locations */
+#define BALLOON3_GPIO_LED_NAND (9)
+#define BALLOON3_GPIO_LED_IDLE (10)
+
+/* backlight control */
+#define BALLOON3_GPIO_RUN_BACKLIGHT (99)
+
+#define BALLOON3_GPIO_S0_CD (105)
+
+/* FPGA Interrupt Mask/Acknowledge Register */
+#define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
+#define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
+
+/* CF Status Register */
+#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */
+#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1)
+ /* VDD sense / card status changed */
+
+/* CF control register (write) */
+#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */
+#define BALLOON3_PCMCIA_ENABLE (1 << 1)
+#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2)
+
+/* CPLD (and FPGA) interface definitions */
+#define CPLD_LCD0_DATA_SET 0x00
+#define CPLD_LCD0_DATA_CLR 0x10
+#define CPLD_LCD0_COMMAND_SET 0x01
+#define CPLD_LCD0_COMMAND_CLR 0x11
+#define CPLD_LCD1_DATA_SET 0x02
+#define CPLD_LCD1_DATA_CLR 0x12
+#define CPLD_LCD1_COMMAND_SET 0x03
+#define CPLD_LCD1_COMMAND_CLR 0x13
+
+#define CPLD_MISC_SET 0x07
+#define CPLD_MISC_CLR 0x17
+#define CPLD_MISC_LOON_NRESET_BIT 0
+#define CPLD_MISC_LOON_UNSUSP_BIT 1
+#define CPLD_MISC_RUN_5V_BIT 2
+#define CPLD_MISC_CHG_D0_BIT 3
+#define CPLD_MISC_CHG_D1_BIT 4
+#define CPLD_MISC_DAC_NCS_BIT 5
+
+#define CPLD_LCD_SET 0x08
+#define CPLD_LCD_CLR 0x18
+#define CPLD_LCD_BACKLIGHT_EN_0_BIT 0
+#define CPLD_LCD_BACKLIGHT_EN_1_BIT 1
+#define CPLD_LCD_LED_RED_BIT 4
+#define CPLD_LCD_LED_GREEN_BIT 5
+#define CPLD_LCD_NRESET_BIT 7
+
+#define CPLD_LCD_RO_SET 0x09
+#define CPLD_LCD_RO_CLR 0x19
+#define CPLD_LCD_RO_LCD0_nWAIT_BIT 0
+#define CPLD_LCD_RO_LCD1_nWAIT_BIT 1
+
+#define CPLD_SERIAL_SET 0x0a
+#define CPLD_SERIAL_CLR 0x1a
+#define CPLD_SERIAL_GSM_RI_BIT 0
+#define CPLD_SERIAL_GSM_CTS_BIT 1
+#define CPLD_SERIAL_GSM_DTR_BIT 2
+#define CPLD_SERIAL_LPR_CTS_BIT 3
+#define CPLD_SERIAL_TC232_CTS_BIT 4
+#define CPLD_SERIAL_TC232_DSR_BIT 5
+
+#define CPLD_SROUTING_SET 0x0b
+#define CPLD_SROUTING_CLR 0x1b
+#define CPLD_SROUTING_MSP430_LPR 0
+#define CPLD_SROUTING_MSP430_TC232 1
+#define CPLD_SROUTING_MSP430_GSM 2
+#define CPLD_SROUTING_LOON_LPR (0 << 4)
+#define CPLD_SROUTING_LOON_TC232 (1 << 4)
+#define CPLD_SROUTING_LOON_GSM (2 << 4)
+
+#define CPLD_AROUTING_SET 0x0c
+#define CPLD_AROUTING_CLR 0x1c
+#define CPLD_AROUTING_MIC2PHONE_BIT 0
+#define CPLD_AROUTING_PHONE2INT_BIT 1
+#define CPLD_AROUTING_PHONE2EXT_BIT 2
+#define CPLD_AROUTING_LOONL2INT_BIT 3
+#define CPLD_AROUTING_LOONL2EXT_BIT 4
+#define CPLD_AROUTING_LOONR2PHONE_BIT 5
+#define CPLD_AROUTING_LOONR2INT_BIT 6
+#define CPLD_AROUTING_LOONR2EXT_BIT 7
+
+extern int balloon3_has(enum balloon3_features feature);
+
+#endif
extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
#endif
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
mov \tmp, \tmp, lsr #13
and \tmp, \tmp, #0x7 @ Core G
cmp \tmp, #1
- bhi 1004f
+ bhi 1002f
+ @ Core Generation 1 (PXA25x)
mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
add \base, \base, #0x00d00000
ldr \irqstat, [\base, #0] @ ICIP
ldr \irqnr, [\base, #4] @ ICMR
- b 1002f
-1004:
- mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2
- mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2
ands \irqnr, \irqstat, \irqnr
- beq 1003f
+ beq 1001f
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
- add \irqnr, \irqnr, #(32 + PXA_IRQ(0))
+ rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
b 1001f
-1003:
- mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
- mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR
1002:
- ands \irqnr, \irqstat, \irqnr
+ @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
+ mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP
+ tst \irqstat, #0x80000000
beq 1001f
- rsb \irqstat, \irqnr, #0
- and \irqstat, \irqstat, \irqnr
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
+ bic \irqstat, \irqstat, #0x80000000
+ mov \irqnr, \irqstat, lsr #16
1001:
.endm
#define __cpu_is_pxa935(id) (0)
#endif
+#ifdef CONFIG_CPU_PXA950
+#define __cpu_is_pxa950(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ id == 0x697; \
+ })
+#else
+#define __cpu_is_pxa950(id) (0)
+#endif
+
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
__cpu_is_pxa935(id); \
})
+#define cpu_is_pxa950() \
+ ({ \
+ unsigned int id = read_cpuid(CPUID_ID); \
+ __cpu_is_pxa950(id); \
+ })
+
+
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
void (*transceiver_mode)(struct device *dev, int mode);
int (*startup)(struct device *dev);
void (*shutdown)(struct device *dev);
+ int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
+ bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
};
extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
#ifdef CONFIG_PXA3xx
#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
+#define IRQ_COMM_WDT PXA_IRQ(35) /* Comm WDT interrupt */
#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
-#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */
+#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller */
#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
#endif
-#define PXA_GPIO_IRQ_BASE PXA_IRQ(64)
-#define PXA_GPIO_IRQ_NUM (128)
+#ifdef CONFIG_CPU_PXA935
+#define IRQ_U2O PXA_IRQ(64) /* USB OTG 2.0 Controller (PXA935) */
+#define IRQ_U2H PXA_IRQ(65) /* USB Host 2.0 Controller (PXA935) */
+
+#define IRQ_MMC3_PXA935 PXA_IRQ(72) /* MMC3 Controller (PXA935) */
+#define IRQ_MMC4_PXA935 PXA_IRQ(73) /* MMC4 Controller (PXA935) */
+#define IRQ_MMC5_PXA935 PXA_IRQ(74) /* MMC5 Controller (PXA935) */
+
+#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
+#define IRQ_ACIPC0 PXA_IRQ(5)
+#define IRQ_ACIPC1 PXA_IRQ(40)
+#define IRQ_ACIPC2 PXA_IRQ(19)
+#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball */
+#endif
+
+#ifdef CONFIG_CPU_PXA950
+#define IRQ_GC500 PXA_IRQ(70) /* Graphics Controller (PXA950) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
+#define PXA_GPIO_IRQ_NUM (192)
#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
#elif defined(CONFIG_MACH_ZYLONITE)
#define IRQ_BOARD_END (IRQ_BOARD_START + 32)
+#elif defined(CONFIG_PXA_EZX)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 23)
#else
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
#endif
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
#ifndef __ASM_ARCH_MFP_H
#define __ASM_ARCH_MFP_H
-#define mfp_to_gpio(m) ((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
- MFP_PIN_INVALID = -1,
-
- MFP_PIN_GPIO0 = 0,
- MFP_PIN_GPIO1,
- MFP_PIN_GPIO2,
- MFP_PIN_GPIO3,
- MFP_PIN_GPIO4,
- MFP_PIN_GPIO5,
- MFP_PIN_GPIO6,
- MFP_PIN_GPIO7,
- MFP_PIN_GPIO8,
- MFP_PIN_GPIO9,
- MFP_PIN_GPIO10,
- MFP_PIN_GPIO11,
- MFP_PIN_GPIO12,
- MFP_PIN_GPIO13,
- MFP_PIN_GPIO14,
- MFP_PIN_GPIO15,
- MFP_PIN_GPIO16,
- MFP_PIN_GPIO17,
- MFP_PIN_GPIO18,
- MFP_PIN_GPIO19,
- MFP_PIN_GPIO20,
- MFP_PIN_GPIO21,
- MFP_PIN_GPIO22,
- MFP_PIN_GPIO23,
- MFP_PIN_GPIO24,
- MFP_PIN_GPIO25,
- MFP_PIN_GPIO26,
- MFP_PIN_GPIO27,
- MFP_PIN_GPIO28,
- MFP_PIN_GPIO29,
- MFP_PIN_GPIO30,
- MFP_PIN_GPIO31,
- MFP_PIN_GPIO32,
- MFP_PIN_GPIO33,
- MFP_PIN_GPIO34,
- MFP_PIN_GPIO35,
- MFP_PIN_GPIO36,
- MFP_PIN_GPIO37,
- MFP_PIN_GPIO38,
- MFP_PIN_GPIO39,
- MFP_PIN_GPIO40,
- MFP_PIN_GPIO41,
- MFP_PIN_GPIO42,
- MFP_PIN_GPIO43,
- MFP_PIN_GPIO44,
- MFP_PIN_GPIO45,
- MFP_PIN_GPIO46,
- MFP_PIN_GPIO47,
- MFP_PIN_GPIO48,
- MFP_PIN_GPIO49,
- MFP_PIN_GPIO50,
- MFP_PIN_GPIO51,
- MFP_PIN_GPIO52,
- MFP_PIN_GPIO53,
- MFP_PIN_GPIO54,
- MFP_PIN_GPIO55,
- MFP_PIN_GPIO56,
- MFP_PIN_GPIO57,
- MFP_PIN_GPIO58,
- MFP_PIN_GPIO59,
- MFP_PIN_GPIO60,
- MFP_PIN_GPIO61,
- MFP_PIN_GPIO62,
- MFP_PIN_GPIO63,
- MFP_PIN_GPIO64,
- MFP_PIN_GPIO65,
- MFP_PIN_GPIO66,
- MFP_PIN_GPIO67,
- MFP_PIN_GPIO68,
- MFP_PIN_GPIO69,
- MFP_PIN_GPIO70,
- MFP_PIN_GPIO71,
- MFP_PIN_GPIO72,
- MFP_PIN_GPIO73,
- MFP_PIN_GPIO74,
- MFP_PIN_GPIO75,
- MFP_PIN_GPIO76,
- MFP_PIN_GPIO77,
- MFP_PIN_GPIO78,
- MFP_PIN_GPIO79,
- MFP_PIN_GPIO80,
- MFP_PIN_GPIO81,
- MFP_PIN_GPIO82,
- MFP_PIN_GPIO83,
- MFP_PIN_GPIO84,
- MFP_PIN_GPIO85,
- MFP_PIN_GPIO86,
- MFP_PIN_GPIO87,
- MFP_PIN_GPIO88,
- MFP_PIN_GPIO89,
- MFP_PIN_GPIO90,
- MFP_PIN_GPIO91,
- MFP_PIN_GPIO92,
- MFP_PIN_GPIO93,
- MFP_PIN_GPIO94,
- MFP_PIN_GPIO95,
- MFP_PIN_GPIO96,
- MFP_PIN_GPIO97,
- MFP_PIN_GPIO98,
- MFP_PIN_GPIO99,
- MFP_PIN_GPIO100,
- MFP_PIN_GPIO101,
- MFP_PIN_GPIO102,
- MFP_PIN_GPIO103,
- MFP_PIN_GPIO104,
- MFP_PIN_GPIO105,
- MFP_PIN_GPIO106,
- MFP_PIN_GPIO107,
- MFP_PIN_GPIO108,
- MFP_PIN_GPIO109,
- MFP_PIN_GPIO110,
- MFP_PIN_GPIO111,
- MFP_PIN_GPIO112,
- MFP_PIN_GPIO113,
- MFP_PIN_GPIO114,
- MFP_PIN_GPIO115,
- MFP_PIN_GPIO116,
- MFP_PIN_GPIO117,
- MFP_PIN_GPIO118,
- MFP_PIN_GPIO119,
- MFP_PIN_GPIO120,
- MFP_PIN_GPIO121,
- MFP_PIN_GPIO122,
- MFP_PIN_GPIO123,
- MFP_PIN_GPIO124,
- MFP_PIN_GPIO125,
- MFP_PIN_GPIO126,
- MFP_PIN_GPIO127,
- MFP_PIN_GPIO0_2,
- MFP_PIN_GPIO1_2,
- MFP_PIN_GPIO2_2,
- MFP_PIN_GPIO3_2,
- MFP_PIN_GPIO4_2,
- MFP_PIN_GPIO5_2,
- MFP_PIN_GPIO6_2,
- MFP_PIN_GPIO7_2,
- MFP_PIN_GPIO8_2,
- MFP_PIN_GPIO9_2,
- MFP_PIN_GPIO10_2,
- MFP_PIN_GPIO11_2,
- MFP_PIN_GPIO12_2,
- MFP_PIN_GPIO13_2,
- MFP_PIN_GPIO14_2,
- MFP_PIN_GPIO15_2,
- MFP_PIN_GPIO16_2,
- MFP_PIN_GPIO17_2,
-
- MFP_PIN_ULPI_STP,
- MFP_PIN_ULPI_NXT,
- MFP_PIN_ULPI_DIR,
-
- MFP_PIN_nXCVREN,
- MFP_PIN_DF_CLE_nOE,
- MFP_PIN_DF_nADV1_ALE,
- MFP_PIN_DF_SCLK_E,
- MFP_PIN_DF_SCLK_S,
- MFP_PIN_nBE0,
- MFP_PIN_nBE1,
- MFP_PIN_DF_nADV2_ALE,
- MFP_PIN_DF_INT_RnB,
- MFP_PIN_DF_nCS0,
- MFP_PIN_DF_nCS1,
- MFP_PIN_nLUA,
- MFP_PIN_nLLA,
- MFP_PIN_DF_nWE,
- MFP_PIN_DF_ALE_nWE,
- MFP_PIN_DF_nRE_nOE,
- MFP_PIN_DF_ADDR0,
- MFP_PIN_DF_ADDR1,
- MFP_PIN_DF_ADDR2,
- MFP_PIN_DF_ADDR3,
- MFP_PIN_DF_IO0,
- MFP_PIN_DF_IO1,
- MFP_PIN_DF_IO2,
- MFP_PIN_DF_IO3,
- MFP_PIN_DF_IO4,
- MFP_PIN_DF_IO5,
- MFP_PIN_DF_IO6,
- MFP_PIN_DF_IO7,
- MFP_PIN_DF_IO8,
- MFP_PIN_DF_IO9,
- MFP_PIN_DF_IO10,
- MFP_PIN_DF_IO11,
- MFP_PIN_DF_IO12,
- MFP_PIN_DF_IO13,
- MFP_PIN_DF_IO14,
- MFP_PIN_DF_IO15,
-
- /* additional pins on PXA930 */
- MFP_PIN_GSIM_UIO,
- MFP_PIN_GSIM_UCLK,
- MFP_PIN_GSIM_UDET,
- MFP_PIN_GSIM_nURST,
- MFP_PIN_PMIC_INT,
- MFP_PIN_RDY,
-
- MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * alternate function = 0,
- * drive strength = fast 3mA (MFP_DS03X)
- * low power mode = default
- * edge detection = none
- *
- * MFP_CFG - default MFPR value with alternate function
- * MFP_CFG_DRV - default MFPR value with alternate function and
- * pin drive strength
- * MFP_CFG_LPM - default MFPR value with alternate function and
- * low power mode
- * MFP_CFG_X - default MFPR value with alternate function,
- * pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x) ((x) & 0x3ff)
-
-#define MFP_AF0 (0x0 << 10)
-#define MFP_AF1 (0x1 << 10)
-#define MFP_AF2 (0x2 << 10)
-#define MFP_AF3 (0x3 << 10)
-#define MFP_AF4 (0x4 << 10)
-#define MFP_AF5 (0x5 << 10)
-#define MFP_AF6 (0x6 << 10)
-#define MFP_AF7 (0x7 << 10)
-#define MFP_AF_MASK (0x7 << 10)
-#define MFP_AF(x) (((x) >> 10) & 0x7)
-
-#define MFP_DS01X (0x0 << 13)
-#define MFP_DS02X (0x1 << 13)
-#define MFP_DS03X (0x2 << 13)
-#define MFP_DS04X (0x3 << 13)
-#define MFP_DS06X (0x4 << 13)
-#define MFP_DS08X (0x5 << 13)
-#define MFP_DS10X (0x6 << 13)
-#define MFP_DS13X (0x7 << 13)
-#define MFP_DS_MASK (0x7 << 13)
-#define MFP_DS(x) (((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT (0x0 << 16)
-#define MFP_LPM_DRIVE_LOW (0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
-#define MFP_LPM_PULL_LOW (0x3 << 16)
-#define MFP_LPM_PULL_HIGH (0x4 << 16)
-#define MFP_LPM_FLOAT (0x5 << 16)
-#define MFP_LPM_INPUT (0x6 << 16)
-#define MFP_LPM_STATE_MASK (0x7 << 16)
-#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE (0x0 << 19)
-#define MFP_LPM_EDGE_RISE (0x1 << 19)
-#define MFP_LPM_EDGE_FALL (0x2 << 19)
-#define MFP_LPM_EDGE_BOTH (0x3 << 19)
-#define MFP_LPM_EDGE_MASK (0x3 << 19)
-#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE (0x0 << 21)
-#define MFP_PULL_LOW (0x1 << 21)
-#define MFP_PULL_HIGH (0x2 << 21)
-#define MFP_PULL_BOTH (0x3 << 21)
-#define MFP_PULL_MASK (0x3 << 21)
-#define MFP_PULL(x) (((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
- MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af) \
- ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+#include <plat/mfp.h>
#endif /* __ASM_ARCH_MFP_H */
int (*get_ro)(struct device *);
void (*setpower)(struct device *, unsigned int);
void (*exit)(struct device *, void *);
+ int gpio_card_detect; /* gpio detecting card insertion */
+ int gpio_card_ro; /* gpio detecting read only toggle */
+ bool gpio_card_ro_invert; /* gpio ro is inverted */
+ int gpio_power; /* gpio powering up MMC bus */
+ bool gpio_power_invert; /* gpio power is inverted */
};
extern void pxa_set_mci_info(struct pxamci_platform_data *info);
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
+ *
+ * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
+ *
+ * Authors: Alex Osborne <bobofdoom@gmail.com>
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Holger Bocklet <bitz.email@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTC_H_
+#define _INCLUDE_PALMTC_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTC_EARPHONE_DETECT 2
+#define GPIO_NR_PALMTC_CRADLE_DETECT 5
+#define GPIO_NR_PALMTC_HOTSYNC_BUTTON 7
+
+/* SD/MMC */
+#define GPIO_NR_PALMTC_SD_DETECT_N 12
+#define GPIO_NR_PALMTC_SD_POWER 32
+#define GPIO_NR_PALMTC_SD_READONLY 54
+
+/* WLAN */
+#define GPIO_NR_PALMTC_PCMCIA_READY 13
+#define GPIO_NR_PALMTC_PCMCIA_PWRREADY 14
+#define GPIO_NR_PALMTC_PCMCIA_POWER1 15
+#define GPIO_NR_PALMTC_PCMCIA_POWER2 33
+#define GPIO_NR_PALMTC_PCMCIA_POWER3 55
+#define GPIO_NR_PALMTC_PCMCIA_RESET 78
+
+/* UDC */
+#define GPIO_NR_PALMTC_USB_DETECT_N 4
+#define GPIO_NR_PALMTC_USB_POWER 36
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTC_BL_POWER 16
+#define GPIO_NR_PALMTC_LCD_POWER 44
+#define GPIO_NR_PALMTC_LCD_BLANK 38
+
+/* UART */
+#define GPIO_NR_PALMTC_RS232_POWER 37
+
+/* IRDA */
+#define GPIO_NR_PALMTC_IR_DISABLE 45
+
+/* IRQs */
+#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+
+/* UCB1400 GPIOs */
+#define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00)
+#define GPIO_NR_PALMTC_HEADPHONE_DETECT (0x80 | 0x01)
+#define GPIO_NR_PALMTC_SPEAKER_ENABLE (0x80 | 0x03)
+#define GPIO_NR_PALMTC_VIBRA_POWER (0x80 | 0x05)
+#define GPIO_NR_PALMTC_LED_POWER (0x80 | 0x07)
+
+/** HERE ARE INIT VALUES **/
+#define PALMTC_UCB1400_GPIO_OFFSET 0x80
+
+/* BATTERY */
+#define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
+#define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
+#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTC_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTC_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTC_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTC_MAX_LIFE_MINS 240 /* on-life in minutes */
+
+#define PALMTC_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTC_MAX_INTENSITY 0xFE
+#define PALMTC_DEFAULT_INTENSITY 0x7E
+#define PALMTC_LIMIT_MASK 0x7F
+#define PALMTC_PRESCALER 0x3F
+#define PALMTC_PERIOD_NS 3500
+
+#endif
#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
+#define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24))
+#define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25))
+#define PALMTX_NAND_ALE_VIRT 0xff100000
+#define PALMTX_NAND_CLE_VIRT 0xff200000
+
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21
#define CKEN_MVED 43 /* < MVED clock enable */
/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */
+#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */
+#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */
#endif /* __ASM_ARCH_PXA3XX_REGS_H */
u_int fixed_modes:1,
cmap_inverse:1,
cmap_static:1,
- unused:29;
+ acceleration_enabled:1,
+ unused:28;
/* The following should be defined in LCCR0
* LCCR0_Act or LCCR0_Pas Active or Passive
#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */
+#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */
+#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */
+#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
+#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
+
+#define IPR(x) __REG(0x40D0001C + (x < 32 ? (x << 2) \
+ : (x < 64 ? (0x94 + ((x - 32) << 2)) \
+ : (0x128 + ((x - 64) << 2)))))
+
#endif /* __ASM_MACH_REGS_INTC_H */
{
if (machine_is_littleton() || machine_is_intelmote2()
|| machine_is_csb726() || machine_is_stargate2()
- || machine_is_cm_x300())
+ || machine_is_cm_x300() || machine_is_balloon3())
UART = STUART;
}
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
- int irq;
+ int irq, i;
pxa_internal_irq_nr = irq_nr;
_ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
}
+ /* initialize interrupt priority */
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < irq_nr; i++)
+ IPR(i) = i | (1 << 31);
+ }
+
/* only unmasked interrupts kick us out of idle */
ICCR = 1;
#endif
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int littleton_mci_init(struct device *dev,
- irq_handler_t littleton_detect_int, void *data)
-{
- int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
-
- err = gpio_request(gpio_cd, "mmc card detect");
- if (err)
- goto err_request_cd;
-
- gpio_direction_input(gpio_cd);
-
- err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "mmc card detect", data);
- if (err) {
- dev_err(dev, "failed to request card detect IRQ\n");
- goto err_request_irq;
- }
- return 0;
-
-err_request_irq:
- gpio_free(gpio_cd);
-err_request_cd:
- return err;
-}
-
-static void littleton_mci_exit(struct device *dev, void *data)
-{
- int gpio_cd = GPIO_MMC1_CARD_DETECT;
-
- free_irq(gpio_to_irq(gpio_cd), data);
- gpio_free(gpio_cd);
-}
-
static struct pxamci_platform_data littleton_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = littleton_mci_init,
- .exit = littleton_mci_exit,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_MMC1_CARD_DETECT,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init littleton_init_mmc(void)
}
static struct pxamci_platform_data lubbock_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .detect_delay = 1,
- .init = lubbock_mci_init,
- .get_ro = lubbock_mci_get_ro,
- .exit = lubbock_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay = 1,
+ .init = lubbock_mci_init,
+ .get_ro = lubbock_mci_get_ro,
+ .exit = lubbock_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
}
static struct pxaficp_platform_data lubbock_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
- .transceiver_mode = lubbock_irda_transceiver_mode,
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
+ .transceiver_mode = lubbock_irda_transceiver_mode,
};
static void __init lubbock_init(void)
* IRDA
*/
-static void magician_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data magician_ficp_info = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = magician_irda_transceiver_mode,
+ .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
static int magician_mci_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
- int err;
-
- err = request_irq(IRQ_MAGICIAN_SD, detect_irq,
+ return request_irq(IRQ_MAGICIAN_SD, detect_irq,
IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
- "MMC card detect", data);
- if (err)
- goto err_request_irq;
- err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER");
- if (err)
- goto err_request_power;
- err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY");
- if (err)
- goto err_request_readonly;
-
- return 0;
-
-err_request_readonly:
- gpio_free(EGPIO_MAGICIAN_SD_POWER);
-err_request_power:
- free_irq(IRQ_MAGICIAN_SD, data);
-err_request_irq:
- return err;
-}
-
-static void magician_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *pdata = dev->platform_data;
-
- gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
-}
-
-static int magician_mci_get_ro(struct device *dev)
-{
- return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
+ "mmc card detect", data);
}
static void magician_mci_exit(struct device *dev, void *data)
{
- gpio_free(EGPIO_MAGICIAN_nSD_READONLY);
- gpio_free(EGPIO_MAGICIAN_SD_POWER);
free_irq(IRQ_MAGICIAN_SD, data);
}
static struct pxamci_platform_data magician_mci_info = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = magician_mci_init,
- .get_ro = magician_mci_get_ro,
- .setpower = magician_mci_setpower,
- .exit = magician_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = magician_mci_init,
+ .exit = magician_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
+ .gpio_card_ro_invert = 1,
+ .gpio_power = EGPIO_MAGICIAN_SD_POWER,
};
}
static struct pxamci_platform_data mainstone_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = mainstone_mci_init,
- .setpower = mainstone_mci_setpower,
- .exit = mainstone_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = mainstone_mci_init,
+ .setpower = mainstone_mci_setpower,
+ .exit = mainstone_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
}
static struct pxaficp_platform_data mainstone_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = mainstone_irda_transceiver_mode,
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = mainstone_irda_transceiver_mode,
};
static struct gpio_keys_button gpio_keys_button[] = {
/*
* SDIO/MMC Card controller
*/
-static void mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
-
- if ((1 << vdd) & p_d->ocr_mask)
- gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */
- else
- gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */
-}
-
-static int mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO78_SDIO_RO);
-}
-
-struct gpio_ress mci_gpios[] = {
- MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"),
- MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"),
- MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable")
-};
-
-static void mci_exit(struct device *dev, void *data)
-{
- mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
- free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
-}
-
-static struct pxamci_platform_data mioa701_mci_info;
-
/**
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
-{
- int rc;
- int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
-
- rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
- if (rc)
- goto err_gpio;
- /* enable RE/FE interrupt on card insertion and removal */
- rc = request_irq(irq, detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (rc)
- goto err_irq;
-
- mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
- return 0;
-
-err_irq:
- dev_err(dev, "mioa701_mci_init: MMC/SD:"
- " can't request MMC card detect IRQ\n");
- mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-err_gpio:
- return rc;
-}
-
static struct pxamci_platform_data mioa701_mci_info = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = mci_init,
- .get_ro = mci_get_ro,
- .setpower = mci_setpower,
- .exit = mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO15_SDIO_INSERT,
+ .gpio_card_ro = GPIO78_SDIO_RO,
+ .gpio_power = GPIO91_SDIO_EN,
};
/* FlashRAM */
},
};
-static struct soc_camera_link iclink = {
- .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
-};
-
/* Board I2C devices. */
static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
{
- /* Must initialize before the camera(s) */
I2C_BOARD_INFO("mt9m111", 0x5d),
- .platform_data = &iclink,
},
};
+static struct soc_camera_link iclink = {
+ .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
+ .board_info = &mioa701_i2c_devices[0],
+ .i2c_adapter_id = 0,
+ .module_name = "mt9m111",
+};
+
struct i2c_pxa_platform_data i2c_pdata = {
.fast_mode = 1,
};
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
+MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
&power_dev,
&strataflash,
&gpio_vbus,
+ &mioa701_camera,
&mioa701_board,
};
static struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
- MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+ MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
};
static void __init mioa701_machine_init(void)
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
set_pxa_fb_info(&mioa701_pxafb_info);
+ mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
- i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
}
static void mioa701_machine_exit(void)
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
/******************************************************************************
- * SD/MMC card controller
+ * NOR Flash
******************************************************************************/
-static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
- void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
- palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
+static struct mtd_partition palmld_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
}
+};
- err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMLD_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmld_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMLD_SD_READONLY);
- gpio_free(GPIO_NR_PALMLD_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-}
+static struct physmap_flash_data palmld_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = palmld_partitions,
+ .nr_parts = ARRAY_SIZE(palmld_partitions)
+ }
+};
-static void palmld_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
+static struct resource palmld_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_4M - 1,
+ .flags = IORESOURCE_MEM,
+};
-static int palmld_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
-}
+static struct platform_device palmld_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &palmld_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = palmld_flash_data,
+ },
+};
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
static struct pxamci_platform_data palmld_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmld_mci_power,
- .get_ro = palmld_mci_get_ro,
- .init = palmld_mci_init,
- .exit = palmld_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMLD_SD_POWER,
+ .detect_delay = 20,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmld_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmld_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-}
-
-static void palmld_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmld_ficp_platform_data = {
- .startup = palmld_irda_startup,
- .shutdown = palmld_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmld_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMLD_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
&power_supply,
&palmld_asoc,
&palmld_hdd,
+ &palmld_flash,
};
static struct map_desc palmld_io_desc[] __initdata = {
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
- void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
- palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMT5_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmt5_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMT5_SD_READONLY);
- gpio_free(GPIO_NR_PALMT5_SD_POWER);
- free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
- gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-}
-
-static void palmt5_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmt5_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
-}
-
static struct pxamci_platform_data palmt5_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmt5_mci_power,
- .get_ro = palmt5_mci_get_ro,
- .init = palmt5_mci_init,
- .exit = palmt5_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMT5_SD_POWER,
+ .detect_delay = 20,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmt5_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmt5_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-}
-
-static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmt5_ficp_platform_data = {
- .startup = palmt5_irda_startup,
- .shutdown = palmt5_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmt5_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/palmtc.c
+ *
+ * Support for the Palm Tungsten|C
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Petr Blaha <p3t3@centrum.cz>
+ * Chetan S. Kumar <shivakumar.chetan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/ucb1400.h>
+#include <linux/power_supply.h>
+#include <linux/gpio_keys.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtc.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtc_pin_config[] __initdata = {
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO12_GPIO, /* detect */
+ GPIO32_GPIO, /* power */
+ GPIO54_GPIO, /* r/o switch */
+
+ /* PCMCIA */
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO49_nPWE,
+ GPIO48_nPOE,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO45_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO17_PWM1_OUT,
+
+ /* USB */
+ GPIO4_GPIO, /* detect */
+ GPIO36_GPIO, /* pullup */
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* MATRIX KEYPAD */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */
+ GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 1 */
+ GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 2 */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 3 */
+ GPIO18_GPIO | MFP_LPM_DRIVE_LOW, /* out 0 */
+ GPIO19_GPIO | MFP_LPM_DRIVE_LOW, /* out 1 */
+ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* out 2 */
+ GPIO21_GPIO | MFP_LPM_DRIVE_LOW, /* out 3 */
+ GPIO22_GPIO | MFP_LPM_DRIVE_LOW, /* out 4 */
+ GPIO23_GPIO | MFP_LPM_DRIVE_LOW, /* out 5 */
+ GPIO24_GPIO | MFP_LPM_DRIVE_LOW, /* out 6 */
+ GPIO25_GPIO | MFP_LPM_DRIVE_LOW, /* out 7 */
+ GPIO26_GPIO | MFP_LPM_DRIVE_LOW, /* out 8 */
+ GPIO27_GPIO | MFP_LPM_DRIVE_LOW, /* out 9 */
+ GPIO79_GPIO | MFP_LPM_DRIVE_LOW, /* out 10 */
+ GPIO80_GPIO | MFP_LPM_DRIVE_LOW, /* out 11 */
+
+ /* PXA GPIO KEYS */
+ GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH, /* hotsync button on cradle */
+
+ /* MISC */
+ GPIO1_RST, /* reset */
+ GPIO2_GPIO, /* earphone detect */
+ GPIO16_GPIO, /* backlight switch */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static struct pxamci_platform_data palmtc_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = GPIO_NR_PALMTC_SD_POWER,
+ .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY,
+ .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N,
+ .detect_delay = 20,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtc_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
+};
+
+static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
+ .buttons = palmtc_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmtc_pxa_buttons),
+};
+
+static struct platform_device palmtc_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtc_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_PALMTC_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmtc_backlight_notify(int brightness)
+{
+ /* backlight is on when GPIO16 AF0 is high */
+ gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
+ return brightness;
+}
+
+static void palmtc_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTC_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtc_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = PALMTC_MAX_INTENSITY,
+ .dft_brightness = PALMTC_MAX_INTENSITY,
+ .pwm_period_ns = PALMTC_PERIOD_NS,
+ .init = palmtc_backlight_init,
+ .notify = palmtc_backlight_notify,
+ .exit = palmtc_backlight_exit,
+};
+
+static struct platform_device palmtc_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm1.dev,
+ .platform_data = &palmtc_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data palmtc_ficp_platform_data = {
+ .gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * Keyboard
+ ******************************************************************************/
+static const uint32_t palmtc_matrix_keys[] = {
+ KEY(0, 0, KEY_F1),
+ KEY(0, 1, KEY_X),
+ KEY(0, 2, KEY_POWER),
+ KEY(0, 3, KEY_TAB),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_LEFTSHIFT),
+ KEY(0, 7, KEY_Z),
+ KEY(0, 8, KEY_S),
+ KEY(0, 9, KEY_W),
+ KEY(0, 10, KEY_E),
+ KEY(0, 11, KEY_UP),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 3, KEY_D),
+ KEY(1, 4, KEY_C),
+ KEY(1, 5, KEY_F),
+ KEY(1, 6, KEY_R),
+ KEY(1, 7, KEY_SPACE),
+ KEY(1, 8, KEY_V),
+ KEY(1, 9, KEY_G),
+ KEY(1, 10, KEY_T),
+ KEY(1, 11, KEY_LEFT),
+
+ KEY(2, 0, KEY_F3),
+ KEY(2, 1, KEY_LEFTCTRL),
+ KEY(2, 3, KEY_H),
+ KEY(2, 4, KEY_Y),
+ KEY(2, 5, KEY_N),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_U),
+ KEY(2, 8, KEY_M),
+ KEY(2, 9, KEY_K),
+ KEY(2, 10, KEY_I),
+ KEY(2, 11, KEY_RIGHT),
+
+ KEY(3, 0, KEY_F4),
+ KEY(3, 1, KEY_ENTER),
+ KEY(3, 3, KEY_DOT),
+ KEY(3, 4, KEY_L),
+ KEY(3, 5, KEY_O),
+ KEY(3, 6, KEY_LEFTALT),
+ KEY(3, 7, KEY_ENTER),
+ KEY(3, 8, KEY_BACKSPACE),
+ KEY(3, 9, KEY_P),
+ KEY(3, 10, KEY_B),
+ KEY(3, 11, KEY_FN),
+};
+
+const struct matrix_keymap_data palmtc_keymap_data = {
+ .keymap = palmtc_matrix_keys,
+ .keymap_size = ARRAY_SIZE(palmtc_matrix_keys),
+};
+
+const static unsigned int palmtc_keypad_row_gpios[] = {
+ 0, 9, 10, 11
+};
+
+const static unsigned int palmtc_keypad_col_gpios[] = {
+ 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
+};
+
+static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
+ .keymap_data = &palmtc_keymap_data,
+ .col_gpios = palmtc_keypad_row_gpios,
+ .num_col_gpios = 12,
+ .row_gpios = palmtc_keypad_col_gpios,
+ .num_row_gpios = 4,
+ .active_low = 1,
+
+ .debounce_ms = 20,
+ .col_scan_delay_us = 5,
+};
+
+static struct platform_device palmtc_keyboard = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_keypad_platform_data,
+ },
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMTC_USB_POWER,
+};
+
+/******************************************************************************
+ * Touchscreen / Battery / GPIO-extender
+ ******************************************************************************/
+static struct platform_device palmtc_ucb1400_core = {
+ .name = "ucb1400_core",
+ .id = -1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct resource palmtc_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition palmtc_flash_parts[] = {
+ {
+ .name = "U-Boot Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ },
+ {
+ .name = "Linux Kernel",
+ .offset = 0x40000,
+ .size = 0x2c0000,
+ },
+ {
+ .name = "Filesystem",
+ .offset = 0x300000,
+ .size = 0xcc0000,
+ },
+ {
+ .name = "U-Boot Environment",
+ .offset = 0xfc0000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data palmtc_flash_data = {
+ .width = 4,
+ .parts = palmtc_flash_parts,
+ .nr_parts = ARRAY_SIZE(palmtc_flash_parts),
+};
+
+static struct platform_device palmtc_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &palmtc_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &palmtc_flash_data,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtc_lcd_modes[] = {
+{
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmtc_lcd_screen = {
+ .modes = palmtc_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmtc_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+ &palmtc_backlight,
+ &palmtc_ucb1400_core,
+ &palmtc_keyboard,
+ &palmtc_pxa_keys,
+ &palmtc_flash,
+};
+
+static void __init palmtc_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+
+ set_pxa_fb_info(&palmtc_lcd_screen);
+ pxa_set_mci_info(&palmtc_mci_platform_data);
+ pxa_set_udc_info(&palmtc_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmtc_ficp_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+};
+
+MACHINE_START(PALMTC, "Palm Tungsten|C")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmtc_init
+MACHINE_END
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int palmte2_mci_init(struct device *dev,
- irq_handler_t palmte2_detect_int, void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
- palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmte2_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
- gpio_free(GPIO_NR_PALMTE2_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-}
-
-static void palmte2_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmte2_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
-}
-
static struct pxamci_platform_data palmte2_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmte2_mci_power,
- .get_ro = palmte2_mci_get_ro,
- .init = palmte2_mci_init,
- .exit = palmte2_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMTE2_SD_POWER,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmte2_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmte2_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-}
-
-static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmte2_ficp_platform_data = {
- .startup = palmte2_irda_startup,
- .shutdown = palmte2_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmte2_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
+ /* NAND */
+ GPIO15_nCS_1,
+ GPIO18_RDY,
+
/* MISC. */
GPIO10_GPIO, /* hotsync button */
GPIO12_GPIO, /* power detect */
};
/******************************************************************************
- * SD/MMC card controller
+ * NOR Flash
******************************************************************************/
-static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
- void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
- palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
+static struct mtd_partition palmtx_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
}
+};
- err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMTX_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmtx_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMTX_SD_READONLY);
- gpio_free(GPIO_NR_PALMTX_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-}
+static struct physmap_flash_data palmtx_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = palmtx_partitions,
+ .nr_parts = ARRAY_SIZE(palmtx_partitions)
+ }
+};
-static void palmtx_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
+static struct resource palmtx_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
-static int palmtx_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
-}
+static struct platform_device palmtx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &palmtx_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = palmtx_flash_data,
+ },
+};
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
static struct pxamci_platform_data palmtx_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmtx_mci_power,
- .get_ro = palmtx_mci_get_ro,
- .init = palmtx_mci_init,
- .exit = palmtx_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMTX_SD_POWER,
+ .detect_delay = 20,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmtx_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmtx_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-}
-
-static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
- .startup = palmtx_irda_startup,
- .shutdown = palmtx_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmtx_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMTX_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+/******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, PALMTX_NAND_CLE_VIRT);
+ else if (ctrl & NAND_ALE)
+ writeb(cmd, PALMTX_NAND_ALE_VIRT);
+ else
+ writeb(cmd, nandaddr);
+}
+
+static struct mtd_partition palmtx_partition_info[] = {
+ [0] = {
+ .name = "palmtx-0",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data palmtx_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(palmtx_partition_info),
+ .partitions = palmtx_partition_info,
+ .chip_delay = 20,
+ .part_probe_types = palmtx_part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = palmtx_nand_cmd_ctl,
+ },
+};
+
+static struct resource palmtx_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device palmtx_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(palmtx_nand_resource),
+ .resource = palmtx_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_nand_platdata,
+ }
+};
+
/******************************************************************************
* Power management - standby
******************************************************************************/
&power_supply,
&palmtx_asoc,
&palmtx_gpio_vbus,
+ &palmtx_flash,
+ &palmtx_nand,
};
static struct map_desc palmtx_io_desc[] __initdata = {
.virtual = PALMTX_PCMCIA_VIRT,
.pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
.length = PALMTX_PCMCIA_SIZE,
- .type = MT_DEVICE
-},
+ .type = MT_DEVICE,
+}, {
+ .virtual = PALMTX_NAND_ALE_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+}, {
+ .virtual = PALMTX_NAND_CLE_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+}
};
static void __init palmtx_map_io(void)
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int palmz72_mci_init(struct device *dev,
- irq_handler_t palmz72_detect_int, void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
- palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- /* SD_POWER is not actually power, but it is more like chip
- * select, i.e. it is inverted */
-
- err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
- if (err)
- goto err4;
- err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMZ72_SD_RO);
-err4:
- gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmz72_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
- free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
- gpio_free(GPIO_NR_PALMZ72_SD_RO);
-}
-
-static void palmz72_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- if (p_d->ocr_mask & (1 << vdd))
- gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
- else
- gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
-}
-
-static int palmz72_mci_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
-}
-
+/* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
static struct pxamci_platform_data palmz72_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmz72_mci_power,
- .get_ro = palmz72_mci_ro,
- .init = palmz72_mci_init,
- .exit = palmz72_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMZ72_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMZ72_SD_RO,
+ .gpio_power = GPIO_NR_PALMZ72_SD_POWER_N,
+ .gpio_power_invert = 1,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmz72_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmz72_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-}
-
-static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmz72_ficp_platform_data = {
- .startup = palmz72_irda_startup,
- .shutdown = palmz72_irda_shutdown,
+ .gpio_pwdown = GPIO_NR_PALMZ72_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = palmz72_irda_transceiver_mode,
};
/******************************************************************************
#define MSECS_PER_JIFFY (1000/HZ)
static struct pxamci_platform_data pcm990_mci_platform_data = {
- .detect_delay = 250 / MSECS_PER_JIFFY,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = pcm990_mci_init,
- .setpower = pcm990_mci_setpower,
- .exit = pcm990_mci_exit,
+ .detect_delay = 250 / MSECS_PER_JIFFY,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = pcm990_mci_init,
+ .setpower = pcm990_mci_setpower,
+ .exit = pcm990_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
gpio_bus_switch = -EINVAL;
}
-static struct soc_camera_link iclink = {
- .bus_id = 0, /* Must match with the camera ID above */
- .query_bus_param = pcm990_camera_query_bus_param,
- .set_bus_param = pcm990_camera_set_bus_param,
- .free_bus = pcm990_camera_free_bus,
-};
-
/* Board I2C devices. */
static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
{
/* Must initialize before the camera(s) */
I2C_BOARD_INFO("pca9536", 0x41),
.platform_data = &pca9536_data,
- }, {
+ },
+};
+
+static struct i2c_board_info pcm990_camera_i2c[] = {
+ {
I2C_BOARD_INFO("mt9v022", 0x48),
- .platform_data = &iclink, /* With extender */
}, {
I2C_BOARD_INFO("mt9m001", 0x5d),
- .platform_data = &iclink, /* With extender */
+ },
+};
+
+static struct soc_camera_link iclink[] = {
+ {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm990_camera_i2c[0],
+ .i2c_adapter_id = 0,
+ .query_bus_param = pcm990_camera_query_bus_param,
+ .set_bus_param = pcm990_camera_set_bus_param,
+ .free_bus = pcm990_camera_free_bus,
+ .module_name = "mt9v022",
+ }, {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm990_camera_i2c[1],
+ .i2c_adapter_id = 0,
+ .query_bus_param = pcm990_camera_query_bus_param,
+ .set_bus_param = pcm990_camera_set_bus_param,
+ .free_bus = pcm990_camera_free_bus,
+ .module_name = "mt9m001",
+ },
+};
+
+static struct platform_device pcm990_camera[] = {
+ {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink[0],
+ },
+ }, {
+ .name = "soc-camera-pdrv",
+ .id = 1,
+ .dev = {
+ .platform_data = &iclink[1],
+ },
},
};
#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
+
+ platform_device_register(&pcm990_camera[0]);
+ platform_device_register(&pcm990_camera[1]);
#endif
printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-static struct pxamci_platform_data poodle_mci_platform_data;
-
static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
{
int err;
- err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
- if (err)
- goto err_out;
-
- err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
- if (err)
- goto err_free_1;
-
err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
if (err)
goto err_free_2;
if (err)
goto err_free_3;
- gpio_direction_input(POODLE_GPIO_nSD_DETECT);
- gpio_direction_input(POODLE_GPIO_nSD_WP);
-
gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
- poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
- __func__);
- goto err_free_4;
- }
-
return 0;
-err_free_4:
- gpio_free(POODLE_GPIO_SD_PWR1);
err_free_3:
gpio_free(POODLE_GPIO_SD_PWR);
err_free_2:
- gpio_free(POODLE_GPIO_nSD_WP);
-err_free_1:
- gpio_free(POODLE_GPIO_nSD_DETECT);
-err_out:
return err;
}
}
}
-static int poodle_mci_get_ro(struct device *dev)
-{
- return !!gpio_get_value(POODLE_GPIO_nSD_WP);
- return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
-}
-
-
static void poodle_mci_exit(struct device *dev, void *data)
{
- free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
gpio_free(POODLE_GPIO_SD_PWR1);
gpio_free(POODLE_GPIO_SD_PWR);
- gpio_free(POODLE_GPIO_nSD_WP);
- gpio_free(POODLE_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data poodle_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = poodle_mci_init,
- .get_ro = poodle_mci_get_ro,
- .setpower = poodle_mci_setpower,
- .exit = poodle_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = poodle_mci_init,
+ .setpower = poodle_mci_setpower,
+ .exit = poodle_mci_exit,
+ .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT,
+ .gpio_card_ro = POODLE_GPIO_nSD_WP,
+ .gpio_power = -1,
};
/*
* Irda
*/
-static void poodle_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int poodle_irda_startup(struct device *dev)
-{
- int err;
-
- err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
- if (err)
- return err;
-
- gpio_direction_output(POODLE_GPIO_IR_ON, 1);
- return 0;
-}
-
-static void poodle_irda_shutdown(struct device *dev)
-{
- gpio_free(POODLE_GPIO_IR_ON);
-}
-
static struct pxaficp_platform_data poodle_ficp_platform_data = {
+ .gpio_pwdown = POODLE_GPIO_IR_ON,
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = poodle_irda_transceiver_mode,
- .startup = poodle_irda_startup,
- .shutdown = poodle_irda_shutdown,
};
set_pxa_fb_parent(&poodle_locomo_device.dev);
set_pxa_fb_info(&poodle_fb_info);
pxa_set_udc_info(&udc_info);
+ poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
} else
BUG();
}
+EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
};
static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
static struct clk_lookup common_clkregs[] = {
INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
};
static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
};
static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
static struct clk_lookup pxa320_clkregs[] = {
INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
};
static int __init pxa320_init(void)
MFP_ADDR_END,
};
+static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
+ MFP_ADDR(GPIO159, 0x0524),
+ MFP_ADDR(GPIO163, 0x0534),
+ MFP_ADDR(GPIO167, 0x0544),
+ MFP_ADDR(GPIO168, 0x0548),
+ MFP_ADDR(GPIO169, 0x054c),
+ MFP_ADDR(GPIO170, 0x0550),
+ MFP_ADDR(GPIO171, 0x0554),
+ MFP_ADDR(GPIO172, 0x0558),
+ MFP_ADDR(GPIO173, 0x055c),
+
+ MFP_ADDR_END,
+};
+
static int __init pxa930_init(void)
{
- if (cpu_is_pxa930()) {
+ if (cpu_is_pxa930() || cpu_is_pxa935()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa930_mfp_addr_map);
}
+ if (cpu_is_pxa935())
+ mfp_init_addr(pxa935_mfp_addr_map);
+
return 0;
}
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
+ /* GPIO matrix keypad */
+ GPIO88_GPIO, /* column 0 */
+ GPIO23_GPIO, /* column 1 */
+ GPIO24_GPIO, /* column 2 */
+ GPIO25_GPIO, /* column 3 */
+ GPIO26_GPIO, /* column 4 */
+ GPIO27_GPIO, /* column 5 */
+ GPIO52_GPIO, /* column 6 */
+ GPIO103_GPIO, /* column 7 */
+ GPIO107_GPIO, /* column 8 */
+ GPIO108_GPIO, /* column 9 */
+ GPIO114_GPIO, /* column 10 */
+ GPIO12_GPIO, /* row 0 */
+ GPIO17_GPIO, /* row 1 */
+ GPIO91_GPIO, /* row 2 */
+ GPIO34_GPIO, /* row 3 */
+ GPIO36_GPIO, /* row 4 */
+ GPIO38_GPIO, /* row 5 */
+ GPIO39_GPIO, /* row 6 */
+
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/*
* Spitz Keyboard Device
*/
+#define SPITZ_KEY_CALENDAR KEY_F1
+#define SPITZ_KEY_ADDRESS KEY_F2
+#define SPITZ_KEY_FN KEY_F3
+#define SPITZ_KEY_CANCEL KEY_F4
+#define SPITZ_KEY_EXOK KEY_F5
+#define SPITZ_KEY_EXCANCEL KEY_F6
+#define SPITZ_KEY_EXJOGDOWN KEY_F7
+#define SPITZ_KEY_EXJOGUP KEY_F8
+#define SPITZ_KEY_JAP1 KEY_LEFTALT
+#define SPITZ_KEY_JAP2 KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC KEY_F9
+#define SPITZ_KEY_MAIL KEY_F10
+#define SPITZ_KEY_OK KEY_F11
+#define SPITZ_KEY_MENU KEY_F12
+
+static const uint32_t spitzkbd_keymap[] = {
+ KEY(0, 0, KEY_LEFTCTRL),
+ KEY(0, 1, KEY_1),
+ KEY(0, 2, KEY_3),
+ KEY(0, 3, KEY_5),
+ KEY(0, 4, KEY_6),
+ KEY(0, 5, KEY_7),
+ KEY(0, 6, KEY_9),
+ KEY(0, 7, KEY_0),
+ KEY(0, 8, KEY_BACKSPACE),
+ KEY(0, 9, SPITZ_KEY_EXOK), /* EXOK */
+ KEY(0, 10, SPITZ_KEY_EXCANCEL), /* EXCANCEL */
+ KEY(1, 1, KEY_2),
+ KEY(1, 2, KEY_4),
+ KEY(1, 3, KEY_R),
+ KEY(1, 4, KEY_Y),
+ KEY(1, 5, KEY_8),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_O),
+ KEY(1, 8, KEY_P),
+ KEY(1, 9, SPITZ_KEY_EXJOGDOWN), /* EXJOGDOWN */
+ KEY(1, 10, SPITZ_KEY_EXJOGUP), /* EXJOGUP */
+ KEY(2, 0, KEY_TAB),
+ KEY(2, 1, KEY_Q),
+ KEY(2, 2, KEY_E),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_G),
+ KEY(2, 5, KEY_U),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_K),
+ KEY(3, 0, SPITZ_KEY_ADDRESS), /* ADDRESS */
+ KEY(3, 1, KEY_W),
+ KEY(3, 2, KEY_S),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_V),
+ KEY(3, 5, KEY_H),
+ KEY(3, 6, KEY_M),
+ KEY(3, 7, KEY_L),
+ KEY(3, 9, KEY_RIGHTSHIFT),
+ KEY(4, 0, SPITZ_KEY_CALENDAR), /* CALENDAR */
+ KEY(4, 1, KEY_A),
+ KEY(4, 2, KEY_D),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_B),
+ KEY(4, 5, KEY_N),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 8, KEY_ENTER),
+ KEY(4, 9, KEY_LEFTSHIFT),
+ KEY(5, 0, SPITZ_KEY_MAIL), /* MAIL */
+ KEY(5, 1, KEY_Z),
+ KEY(5, 2, KEY_X),
+ KEY(5, 3, KEY_MINUS),
+ KEY(5, 4, KEY_SPACE),
+ KEY(5, 5, KEY_COMMA),
+ KEY(5, 7, KEY_UP),
+ KEY(5, 10, SPITZ_KEY_FN), /* FN */
+ KEY(6, 0, KEY_SYSRQ),
+ KEY(6, 1, SPITZ_KEY_JAP1), /* JAP1 */
+ KEY(6, 2, SPITZ_KEY_JAP2), /* JAP2 */
+ KEY(6, 3, SPITZ_KEY_CANCEL), /* CANCEL */
+ KEY(6, 4, SPITZ_KEY_OK), /* OK */
+ KEY(6, 5, SPITZ_KEY_MENU), /* MENU */
+ KEY(6, 6, KEY_LEFT),
+ KEY(6, 7, KEY_DOWN),
+ KEY(6, 8, KEY_RIGHT),
+};
+
+static const struct matrix_keymap_data spitzkbd_keymap_data = {
+ .keymap = spitzkbd_keymap,
+ .keymap_size = ARRAY_SIZE(spitzkbd_keymap),
+};
+
+static const uint32_t spitzkbd_row_gpios[] =
+ { 12, 17, 91, 34, 36, 38, 39 };
+static const uint32_t spitzkbd_col_gpios[] =
+ { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
+
+static struct matrix_keypad_platform_data spitzkbd_pdata = {
+ .keymap_data = &spitzkbd_keymap_data,
+ .row_gpios = spitzkbd_row_gpios,
+ .col_gpios = spitzkbd_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
static struct platform_device spitzkbd_device = {
- .name = "spitz-keyboard",
+ .name = "matrix-keypad",
.id = -1,
+ .dev = {
+ .platform_data = &spitzkbd_pdata,
+ },
};
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
+ .pressure_max = 1024,
.gpio_pendown = SPITZ_GPIO_TP_INT,
.wait_for_sync = spitz_wait_for_hsync,
};
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-
-static struct pxamci_platform_data spitz_mci_platform_data;
-
-static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data)
-{
- int err;
-
- err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
- if (err)
- goto err_out;
-
- err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
- if (err)
- goto err_free_1;
-
- gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
- gpio_direction_input(SPITZ_GPIO_nSD_WP);
-
- spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
- __func__);
- goto err_free_2;
- }
- return 0;
-
-err_free_2:
- gpio_free(SPITZ_GPIO_nSD_WP);
-err_free_1:
- gpio_free(SPITZ_GPIO_nSD_DETECT);
-err_out:
- return err;
-}
-
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
}
-static int spitz_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(SPITZ_GPIO_nSD_WP);
-}
-
-static void spitz_mci_exit(struct device *dev, void *data)
-{
- free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
- gpio_free(SPITZ_GPIO_nSD_WP);
- gpio_free(SPITZ_GPIO_nSD_DETECT);
-}
-
static struct pxamci_platform_data spitz_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = spitz_mci_init,
- .get_ro = spitz_mci_get_ro,
- .setpower = spitz_mci_setpower,
- .exit = spitz_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .setpower = spitz_mci_setpower,
+ .gpio_card_detect = SPITZ_GPIO_nSD_DETECT,
+ .gpio_card_ro = SPITZ_GPIO_nSD_WP,
+ .gpio_power = -1,
};
/*
* Irda
*/
-static int spitz_irda_startup(struct device *dev)
-{
- int rc;
-
- rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
- if (rc)
- goto err;
-
- rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
- if (rc)
- goto err_dir;
-
- return 0;
-
-err_dir:
- gpio_free(SPITZ_GPIO_IR_ON);
-err:
- return rc;
-}
-
-static void spitz_irda_shutdown(struct device *dev)
-{
- gpio_free(SPITZ_GPIO_IR_ON);
-}
-
-static void spitz_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-#ifdef CONFIG_MACH_AKITA
-static void akita_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-#endif
static struct pxaficp_platform_data spitz_ficp_platform_data = {
+/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = spitz_irda_transceiver_mode,
- .startup = spitz_irda_startup,
- .shutdown = spitz_irda_shutdown,
};
spitz_init_spi();
platform_add_devices(devices, ARRAY_SIZE(devices));
+ spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&spitz_mci_platform_data);
pxa_set_ohci_info(&spitz_ohci_platform_data);
pxa_set_ficp_info(&spitz_ficp_platform_data);
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
static void __init spitz_init(void)
{
+ spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+
platform_scoop_config = &spitz_pcmcia_config;
common_init();
static void __init akita_init(void)
{
- spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+ spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
/*
* MMC/SD Device
*/
-static struct pxamci_platform_data tosa_mci_platform_data;
-
static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
{
int err;
- tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
- if (err) {
- printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
- goto err_gpio_detect;
- }
- err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
- if (err)
- goto err_gpio_detect_dir;
-
- err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC/SD card detect", data);
- if (err) {
- printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- goto err_irq;
- }
-
- err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
- if (err) {
- printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
- goto err_gpio_wp;
- }
- err = gpio_direction_input(TOSA_GPIO_SD_WP);
- if (err)
- goto err_gpio_wp_dir;
-
- err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
- if (err) {
- printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
- goto err_gpio_pwr;
- }
- err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
- if (err)
- goto err_gpio_pwr_dir;
-
err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
if (err) {
printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
err_gpio_int_dir:
gpio_free(TOSA_GPIO_nSD_INT);
err_gpio_int:
-err_gpio_pwr_dir:
- gpio_free(TOSA_GPIO_PWR_ON);
-err_gpio_pwr:
-err_gpio_wp_dir:
- gpio_free(TOSA_GPIO_SD_WP);
-err_gpio_wp:
- free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-err_irq:
-err_gpio_detect_dir:
- gpio_free(TOSA_GPIO_nSD_DETECT);
-err_gpio_detect:
return err;
}
-static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data* p_d = dev->platform_data;
-
- if (( 1 << vdd) & p_d->ocr_mask) {
- gpio_set_value(TOSA_GPIO_PWR_ON, 1);
- } else {
- gpio_set_value(TOSA_GPIO_PWR_ON, 0);
- }
-}
-
-static int tosa_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(TOSA_GPIO_SD_WP);
-}
-
static void tosa_mci_exit(struct device *dev, void *data)
{
gpio_free(TOSA_GPIO_nSD_INT);
- gpio_free(TOSA_GPIO_PWR_ON);
- gpio_free(TOSA_GPIO_SD_WP);
- free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
- gpio_free(TOSA_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data tosa_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = tosa_mci_init,
- .get_ro = tosa_mci_get_ro,
- .setpower = tosa_mci_setpower,
- .exit = tosa_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = tosa_mci_init,
+ .exit = tosa_mci_exit,
+ .gpio_card_detect = TOSA_GPIO_nSD_DETECT,
+ .gpio_card_ro = TOSA_GPIO_SD_WP,
+ .gpio_power = TOSA_GPIO_PWR_ON,
};
/*
}
static struct pxaficp_platform_data tosa_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = tosa_irda_transceiver_mode,
- .startup = tosa_irda_startup,
- .shutdown = tosa_irda_shutdown,
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = tosa_irda_transceiver_mode,
+ .startup = tosa_irda_startup,
+ .shutdown = tosa_irda_shutdown,
};
/*
dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+ tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int treo680_mci_init(struct device *dev,
- irq_handler_t treo680_detect_int, void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
-
- if (err)
- goto err;
-
- err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
- if (err)
- goto err2;
-
- err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
- treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
-
- if (err) {
- dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
-
- err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
-
- err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
- if (err)
- goto err5;
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_TREO680_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_TREO680_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-err:
- return err;
-}
-
-static void treo680_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_TREO680_SD_READONLY);
- gpio_free(GPIO_NR_TREO680_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
- gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-}
-
-static void treo680_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int treo680_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
-}
-
static struct pxamci_platform_data treo680_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = treo680_mci_power,
- .get_ro = treo680_mci_get_ro,
- .init = treo680_mci_init,
- .exit = treo680_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_TREO680_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
+ .gpio_power = GPIO_NR_TREO680_SD_POWER,
};
/******************************************************************************
ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
if (ret)
goto err2;
- ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
- if (ret)
- goto err3;
return 0;
-err3:
- gpio_free(GPIO_NR_TREO680_LCD_POWER);
+
err2:
gpio_free(GPIO_NR_TREO680_BL_POWER);
err:
static void treo680_backlight_exit(struct device *dev)
{
gpio_free(GPIO_NR_TREO680_BL_POWER);
- gpio_free(GPIO_NR_TREO680_LCD_POWER);
}
static struct platform_pwm_backlight_data treo680_backlight_data = {
/******************************************************************************
* IrDA
******************************************************************************/
-static void treo680_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int treo680_irda_startup(struct device *dev)
-{
- int err;
-
- err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
- if (err)
- goto err1;
-
- err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
- if (err)
- goto err2;
-
- return 0;
-
-err2:
- dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
- gpio_free(GPIO_NR_TREO680_IR_EN);
-err1:
- dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
- return err;
-}
-
-static void treo680_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO680_IR_EN);
-}
-
static struct pxaficp_platform_data treo680_ficp_info = {
- .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
- .startup = treo680_irda_startup,
- .shutdown = treo680_irda_shutdown,
- .transceiver_mode = treo680_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_TREO680_IR_EN,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
},
};
+static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+}
+
static struct pxafb_mach_info treo680_lcd_screen = {
.modes = treo680_lcd_modes,
.num_modes = ARRAY_SIZE(treo680_lcd_modes),
}
}
+static void __init treo680_lcd_power_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+ if (ret) {
+ pr_err("Treo680: LCD power GPIO request failed!\n");
+ return;
+ }
+
+ ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+ if (ret) {
+ pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+ gpio_free(GPIO_NR_TREO680_LCD_POWER);
+ return;
+ }
+
+ treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+}
+
static void __init treo680_init(void)
{
treo680_pm_init();
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
pxa_set_keypad_info(&treo680_keypad_platform_data);
+ treo680_lcd_power_init();
set_pxa_fb_info(&treo680_lcd_screen);
pxa_set_mci_info(&treo680_mci_platform_data);
treo680_udc_init();
.exit = trizeps4_mci_exit,
.get_ro = NULL, /* write-protection not supported */
.setpower = NULL, /* power-switching not supported */
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
/****************************************************************************
}
static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+ .gpio_pwdown = -1,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = trizeps4_irda_transceiver_mode,
.startup = trizeps4_irda_startup,
--- /dev/null
+/* linux/arch/arm/mach-pxa/xcep.c
+ *
+ * Support for the Iskratel Electronics XCEP platform as used in
+ * the Libera instruments from Instrumentation Technologies.
+ *
+ * Author: Ales Bardorfer <ales@i-tech.si>
+ * Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
+ * Contributions by: Matej Kenda <matej.kenda@i-tech.si>
+ * Created: June 2006
+ * Copyright: (C) 2006-2009 Instrumentation Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#include "generic.h"
+
+#define XCEP_ETH_PHYS (PXA_CS3_PHYS + 0x00000300)
+#define XCEP_ETH_PHYS_END (PXA_CS3_PHYS + 0x000fffff)
+#define XCEP_ETH_ATTR (PXA_CS3_PHYS + 0x02000000)
+#define XCEP_ETH_ATTR_END (PXA_CS3_PHYS + 0x020fffff)
+#define XCEP_ETH_IRQ IRQ_GPIO0
+
+/* XCEP CPLD base */
+#define XCEP_CPLD_BASE 0xf0000000
+
+
+/* Flash partitions. */
+
+static struct mtd_partition xcep_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "Bootloader ENV",
+ .size = 0x00040000,
+ .offset = 0x00040000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "Kernel",
+ .size = 0x00100000,
+ .offset = 0x00080000,
+ }, {
+ .name = "Rescue fs",
+ .size = 0x00280000,
+ .offset = 0x00180000,
+ }, {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00400000
+ }
+};
+
+static struct physmap_flash_data xcep_flash_data[] = {
+ {
+ .width = 4, /* bankwidth in bytes */
+ .parts = xcep_partitions,
+ .nr_parts = ARRAY_SIZE(xcep_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = xcep_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+
+
+/* SMC LAN91C111 network controller. */
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = XCEP_ETH_PHYS,
+ .end = XCEP_ETH_PHYS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = XCEP_ETH_IRQ,
+ .end = XCEP_ETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "smc91x-attrib",
+ .start = XCEP_ETH_ATTR,
+ .end = XCEP_ETH_ATTR_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct smc91x_platdata xcep_smc91x_info = {
+ .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &xcep_smc91x_info,
+ },
+};
+
+
+static struct platform_device *devices[] __initdata = {
+ &flash_device,
+ &smc91x_device,
+};
+
+
+/* We have to state that there are HWMON devices on the I2C bus on XCEP.
+ * Drivers for HWMON verify capabilities of the adapter when loading and
+ * refuse to attach if the adapter doesn't support HWMON class of devices.
+ * See also Documentation/i2c/porting-clients. */
+static struct i2c_pxa_platform_data xcep_i2c_platform_data = {
+ .class = I2C_CLASS_HWMON
+};
+
+
+static mfp_cfg_t xcep_pin_config[] __initdata = {
+ GPIO79_nCS_3, /* SMC 91C111 chip select. */
+ GPIO80_nCS_4, /* CPLD chip select. */
+ /* SSP communication to MSP430 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO27_SSP1_EXTCLK
+};
+
+static void __init xcep_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+
+ /* See Intel XScale Developer's Guide for details */
+ /* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
+ MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+ /* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
+ MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+ pxa_set_i2c_info(&xcep_i2c_platform_data);
+}
+
+MACHINE_START(XCEP, "Iskratel XCEP")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .init_machine = xcep_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
.init = zylonite_mci_init,
.exit = zylonite_mci_exit,
.get_ro = zylonite_mci_ro,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static struct pxamci_platform_data zylonite_mci2_platform_data = {
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/ata_platform.h>
+#include <linux/amba/mmci.h>
#include <asm/clkdev.h>
#include <asm/system.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/hardware/gic.h>
return readl(REALVIEW_SYSMCI) & mask;
}
-struct mmc_platform_data realview_mmc0_plat_data = {
+struct mmci_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
.gpio_wp = 17,
.gpio_cd = 16,
};
-struct mmc_platform_data realview_mmc1_plat_data = {
+struct mmci_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
.gpio_wp = 19,
static struct clk_lookup lookups[] = {
{ /* UART0 */
- .dev_id = "dev:f1",
+ .dev_id = "dev:uart0",
.clk = &ref24_clk,
}, { /* UART1 */
- .dev_id = "dev:f2",
+ .dev_id = "dev:uart1",
.clk = &ref24_clk,
}, { /* UART2 */
- .dev_id = "dev:f3",
+ .dev_id = "dev:uart2",
.clk = &ref24_clk,
}, { /* UART3 */
- .dev_id = "fpga:09",
+ .dev_id = "fpga:uart3",
.clk = &ref24_clk,
}, { /* KMI0 */
- .dev_id = "fpga:06",
+ .dev_id = "fpga:kmi0",
.clk = &ref24_clk,
}, { /* KMI1 */
- .dev_id = "fpga:07",
+ .dev_id = "fpga:kmi1",
.clk = &ref24_clk,
}, { /* MMC0 */
- .dev_id = "fpga:05",
+ .dev_id = "fpga:mmc0",
.clk = &ref24_clk,
}, { /* EB:CLCD */
- .dev_id = "dev:20",
+ .dev_id = "dev:clcd",
.clk = &oscvco_clk,
}, { /* PB:CLCD */
- .dev_id = "issp:20",
+ .dev_id = "issp:clcd",
.clk = &oscvco_clk,
}
};
extern struct platform_device realview_flash_device;
extern struct platform_device realview_cf_device;
extern struct platform_device realview_i2c_device;
-extern struct mmc_platform_data realview_mmc0_plat_data;
-extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct mmci_platform_data realview_mmc0_plat_data;
+extern struct mmci_platform_data realview_mmc1_plat_data;
extern struct clcd_board clcd_plat_data;
extern void __iomem *gic_cpu_base_addr;
extern void __iomem *timer0_va_base;
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/board-eb.h>
#define EB_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", EB_SMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", EB_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL);
+AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/board-pb1176.h>
#define PB1176_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PB1176_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PB1176_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PB1176_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PB1176_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PB1176_CLCD, &clcd_plat_data);
-//AMBA_DEVICE(dmac, "issp:30", PB1176_DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PB1176_CLCD, &clcd_plat_data);
+//AMBA_DEVICE(dmac, "issp:dmac", PB1176_DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
// &dmac_device,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/board-pb11mp.h>
#define PB11MP_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PB11MP_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PB11MP_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PB11MP_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PB11MP_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#define PBA8_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PBA8_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PBA8_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PBA8_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PBA8_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#define PBX_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PBX_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PBX_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PBX_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PBX_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
select CPU_S3C2410
select PM_H1940 if PM
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the HP IPAQ H1940
bool "Acer N30 family"
select CPU_S3C2410
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
select S3C24XX_DCLK
select ISA
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
bool "NexVision OTOM Board"
select CPU_S3C2410
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision OTOM board
bool "QT2410"
select CPU_S3C2410
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Armzone QT2410
bool "Logitech Jive"
select CPU_S3C2412
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Logitech Jive.
select MACH_S3C2413
select MACH_SMDK
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using an SMDK2413
bool "VMSTMS"
select CPU_S3C2412
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using an VSTMS board
select S3C2440_XTAL_12000000
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
select CPU_S3C2440
select S3C2440_XTAL_16934400
select PM_H1940 if PM
+ select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the SMDK2440.
select CPU_S3C2440
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the AT2440EVB development board
select EEPROM_AT24
select LEDS_TRIGGER_BACKLIGHT
select SND_S3C24XX_SOC_S3C24XX_UDA134X
+ select S3C_DEV_NAND
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
bool "SMDK6400"
select CPU_S3C6400
select S3C_DEV_HSMMC
+ select S3C_DEV_NAND
select S3C6400_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400
bool "Airgoo HMT"
select CPU_S3C6410
select S3C_DEV_FB
+ select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C64XX_SETUP_FB_24BPP
select HAVE_PWM
static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
-static spinlock_t dma_list_lock;
+static DEFINE_SPINLOCK(dma_list_lock);
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
Memory Interface) from both from access and application
side.
+config MACH_U300_SPIDUMMY
+ bool "SSP/SPI dummy chip"
+ select SPI
+ select SPI_MASTER
+ select SPI_PL022
+ help
+ This creates a small kernel module that creates a dummy
+ SPI device to be used for loopback tests. Regularly used
+ to test reference designs. If you're not testing SPI,
+ you don't need it. Selecting this will activate the
+ SPI framework and ARM PL022 support.
+
comment "All the settings below must match the bootloader's settings"
config MACH_U300_ACCESS_MEM_SIZE
obj-$(CONFIG_ARCH_U300) += u300.o
obj-$(CONFIG_MMC) += mmc.o
+obj-$(CONFIG_SPI_PL022) += spi.o
+obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
+obj-$(CONFIG_I2C_STU300) += i2c.o
#include "clock.h"
#include "mmc.h"
+#include "spi.h"
+#include "i2c.h"
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
};
static struct platform_device i2c0_device = {
- .name = "stddci2c",
+ .name = "stu300",
.id = 0,
.num_resources = ARRAY_SIZE(i2c0_resources),
.resource = i2c0_resources,
};
static struct platform_device i2c1_device = {
- .name = "stddci2c",
+ .name = "stu300",
.id = 1,
.num_resources = ARRAY_SIZE(i2c1_resources),
.resource = i2c1_resources,
/* Wait for the PLL208 to lock if not locked in yet */
while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
U300_SYSCON_CSR_PLL208_LOCK_IND));
+ /* Initialize SPI device with some board specifics */
+ u300_spi_init(&pl022_device);
/* Register the AMBA devices in the AMBA bus abstraction layer */
u300_clock_primecells();
u300_assign_physmem();
+ /* Register subdevices on the I2C buses */
+ u300_i2c_register_board_devices();
+
+ /* Register subdevices on the SPI bus */
+ u300_spi_register_board_devices();
+
/* Register the platform devices */
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
--- /dev/null
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+ struct device *dev;
+ struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+ /*
+ * WARNING! Do not dereference the chip-specific data in any normal
+ * driver for a chip. It is usually STATIC and shall not be read
+ * or written to. Your chip driver should NOT depend on fields in this
+ * struct, this is just used here to alter the behaviour of the chip
+ * in order to perform tests.
+ */
+ struct pl022_config_chip *chip_info = spi->controller_data;
+ int status;
+ u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+ 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+ 0xF0, 0x0D};
+ u8 rxbuf[14];
+ u8 *bigtxbuf_virtual;
+ u8 *bigrxbuf_virtual;
+
+ if (mutex_lock_interruptible(&p_dummy->lock))
+ return -ERESTARTSYS;
+
+ bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+ if (bigtxbuf_virtual == NULL) {
+ status = -ENOMEM;
+ goto out;
+ }
+ bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+ /* Fill TXBUF with some happy pattern */
+ memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+ /*
+ * Force chip to 8 bit mode
+ * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+ */
+ chip_info->data_size = SSP_DATA_BITS_8;
+ /* You should NOT DO THIS EITHER */
+ spi->master->setup(spi);
+
+ /* Now run the tests for 8bit mode */
+ pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+ "in 8bit mode\n");
+ status = spi_w8r8(spi, 0xAA);
+ if (status < 0)
+ pr_warning("Siple test 1: FAILURE: spi_write_then_read "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 1: SUCCESS!\n");
+
+ pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+ "in 8bit mode (full FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 2: SUCCESS!\n");
+
+ pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+ "in 8bit mode (see if we overflow FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 3: FAILURE: failed with status %d "
+ "(probably FIFO overrun)\n", status);
+ else
+ pr_info("Simple test 3: SUCCESS!\n");
+
+ pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+ "bytes garbage with spi_read() in 8bit mode\n");
+ status = spi_write(spi, &txbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 4 step 1: SUCCESS!\n");
+ status = spi_read(spi, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+ pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+ "14 bytes garbage with spi_read() in 8bit mode\n");
+ status = spi_write(spi, &txbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 5 step 1: SUCCESS!\n");
+ status = spi_read(spi, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 5: SUCCESS!\n");
+
+ pr_info("Simple test 6: write %d bytes with spi_write(), "
+ "read %d bytes garbage with spi_read() in 8bit mode\n",
+ DMA_TEST_SIZE, DMA_TEST_SIZE);
+ status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 6 step 1: SUCCESS!\n");
+ status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 6: SUCCESS!\n");
+
+
+ /*
+ * Force chip to 16 bit mode
+ * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+ */
+ chip_info->data_size = SSP_DATA_BITS_16;
+ /* You should NOT DO THIS EITHER */
+ spi->master->setup(spi);
+
+ pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+ "in 16bit bus mode\n");
+ status = spi_w8r8(spi, 0xAA);
+ if (status == -EIO)
+ pr_info("Simple test 7: SUCCESS! (expected failure with "
+ "status EIO)\n");
+ else if (status < 0)
+ pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+ "failed with status %d\n", status);
+ else
+ pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+ "succeeded but it was expected to fail!\n");
+
+ pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+ "in 16bit mode (full FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 8: SUCCESS!\n");
+
+ pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+ "in 16bit mode (see if we overflow FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 9: FAILURE: failed with status %d "
+ "(probably FIFO overrun)\n", status);
+ else
+ pr_info("Simple test 9: SUCCESS!\n");
+
+ pr_info("Simple test 10: write %d bytes with spi_write(), "
+ "read %d bytes garbage with spi_read() in 16bit mode\n",
+ DMA_TEST_SIZE, DMA_TEST_SIZE);
+ status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+ status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 10: SUCCESS!\n");
+
+ status = sprintf(buf, "loop test complete\n");
+ kfree(bigrxbuf_virtual);
+ kfree(bigtxbuf_virtual);
+ out:
+ mutex_unlock(&p_dummy->lock);
+ return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int __devinit pl022_dummy_probe(struct spi_device *spi)
+{
+ struct dummy *p_dummy;
+ int status;
+
+ dev_info(&spi->dev, "probing dummy SPI device\n");
+
+ p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+ if (!p_dummy)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, p_dummy);
+ mutex_init(&p_dummy->lock);
+
+ /* sysfs hook */
+ status = device_create_file(&spi->dev, &dev_attr_looptest);
+ if (status) {
+ dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+ goto out_dev_create_looptest_failed;
+ }
+
+ return 0;
+
+out_dev_create_looptest_failed:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(p_dummy);
+ return status;
+}
+
+static int __devexit pl022_dummy_remove(struct spi_device *spi)
+{
+ struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+ dev_info(&spi->dev, "removing dummy SPI device\n");
+ device_remove_file(&spi->dev, &dev_attr_looptest);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(p_dummy);
+
+ return 0;
+}
+
+static struct spi_driver pl022_dummy_driver = {
+ .driver = {
+ .name = "spi-dummy",
+ .owner = THIS_MODULE,
+ },
+ .probe = pl022_dummy_probe,
+ .remove = __devexit_p(pl022_dummy_remove),
+};
+
+static int __init pl022_init_dummy(void)
+{
+ return spi_register_driver(&pl022_dummy_driver);
+}
+
+static void __exit pl022_exit_dummy(void)
+{
+ spi_unregister_driver(&pl022_dummy_driver);
+}
+
+module_init(pl022_init_dummy);
+module_exit(pl022_exit_dummy);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
#include <linux/platform_device.h>
#include <linux/gpio.h>
-/* Need access to SYSCON registers for PADmuxing */
-#include <mach/syscon.h>
-
-#include "padmux.h"
-
/* Reference to GPIO block clock */
static struct clk *clk;
writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
#endif
- /* Set up some padmuxing here */
-#ifdef CONFIG_MMC
- pmx_set_mission_mode_mmc();
-#endif
-#ifdef CONFIG_SPI_PL022
- pmx_set_mission_mode_spi();
-#endif
-
gpio_set_initial_values();
for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
--- /dev/null
+/*
+ * arch/arm/mach-u300/i2c.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <mach/irqs.h>
+
+static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+ {
+ .type = "ab3100",
+ .addr = 0x48,
+ .irq = IRQ_U300_IRQ0_EXT,
+ },
+};
+
+static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .type = "fwcam",
+ .addr = 0x10,
+ },
+ {
+ .type = "fwcam",
+ .addr = 0x5d,
+ },
+#else
+ { },
+#endif
+};
+
+void __init u300_i2c_register_board_devices(void)
+{
+ i2c_register_board_info(0, bus0_i2c_board_info,
+ ARRAY_SIZE(bus0_i2c_board_info));
+ i2c_register_board_info(1, bus1_i2c_board_info,
+ ARRAY_SIZE(bus1_i2c_board_info));
+}
--- /dev/null
+/*
+ * arch/arm/mach-u300/i2c.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef MACH_U300_I2C_H
+#define MACH_U300_I2C_H
+
+#ifdef CONFIG_I2C_STU300
+void __init u300_i2c_register_board_devices(void);
+#else
+/* Compile out this stuff if no I2C adapter is available */
+static inline void __init u300_i2c_register_board_devices(void)
+{
+}
+#endif
+
+#endif
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
#endif
+/*
+ * TCM memory whereabouts
+ */
+#define ITCM_OFFSET 0xffff2000
+#define ITCM_END 0xffff3fff
+#define DTCM_OFFSET 0xffff4000
+#define DTCM_END 0xffff5fff
+
/*
* We enable a real big DMA buffer if need be.
*/
#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000)
#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000)
#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000)
+#elif CONFIG_MACH_U300_BS365
#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000)
#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000)
+#endif
#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000)
#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000)
#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000)
#define U300_SYSCON_MMCR_MASK (0x0003)
#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002)
#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001)
-
+/* Pull up/down control (R/W) */
+#define U300_SYSCON_PUCR (0x104)
+#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200)
+#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100)
+#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080)
+#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040)
+#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F)
+/* Padmux 2 control */
+#define U300_SYSCON_PMC2R (0x100)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080)
+#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200)
+#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800)
+#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000)
/* TODO: More SYSCON registers missing */
#define U300_SYSCON_PMC3R (0x10c)
#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000)
#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000)
#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000)
#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000)
-/* TODO: Missing other configs, I just added the SPI stuff */
-
+/* TODO: Missing other configs */
+#define U300_SYSCON_PMC4R (0x168)
+#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003)
+#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008)
+#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020)
+#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100)
+#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200)
/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
#define U300_SYSCON_S0CCR (0x120)
#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000)
#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200)
#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_S1CCR (0x124)
#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000)
#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200)
#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000)
#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000)
#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200)
#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C)
#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002)
#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR (0x0130)
+#define U300_SYSCON_PICR_MASK (0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR (0x0134)
+#define U300_SYSCON_PISR_MASK (0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR (0x0138)
+#define U300_SYSCON_PICLR_MASK (0x000F)
+#define U300_SYSCON_PICLR_RWMASK (0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001)
+/* CAMIF_CONTROL 16 bit (-/W) */
+#define U300_SYSCON_CICR (0x013C)
+#define U300_SYSCON_CICR_MASK (0x0FFF)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003)
/* Clock activity observability register 0 */
#define U300_SYSCON_C0OAR (0x140)
#define U300_SYSCON_C0OAR_MASK (0xFFFF)
/**
* CPU medium frequency in MHz
*/
-#define SYSCON_CPU_CLOCK_MEDIUM 104
+#define SYSCON_CPU_CLOCK_MEDIUM 52
/**
* CPU low frequency in MHz
*/
/**
* EMIF medium frequency in MHz
*/
-#define SYSCON_EMIF_CLOCK_MEDIUM 104
+#define SYSCON_EMIF_CLOCK_MEDIUM 52
/**
* EMIF low frequency in MHz
*/
/**
* AHB medium frequency in MHz
*/
-#define SYSCON_AHB_CLOCK_MEDIUM 52
+#define SYSCON_AHB_CLOCK_MEDIUM 26
/**
* AHB low frequency in MHz
*/
SYSCON_BM_VIDEO_ENC
};
+/* Selectr a resistor or a set of resistors */
+enum syscon_pull_up_down {
+ SYSCON_PU_KEY_IN_EN,
+ SYSCON_PU_EMIF_1_8_BIT_EN,
+ SYSCON_PU_EMIF_1_16_BIT_EN,
+ SYSCON_PU_EMIF_1_NFIF_READY_EN,
+ SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
+};
+
/*
* Note that this array must match the order of the array "clk_reg"
* in syscon.c
SYSCON_CLKCONTROL_SPI,
SYSCON_CLKCONTROL_I2S0_CORE,
SYSCON_CLKCONTROL_I2S1_CORE,
+ SYSCON_CLKCONTROL_UART1,
SYSCON_CLKCONTROL_AAIF,
SYSCON_CLKCONTROL_AHB,
SYSCON_CLKCONTROL_APEX,
enum syscon_sysclk_req {
SYSCON_SYSCLKREQ_DISABLED,
- SYSCON_SYSCLKREQ_ACTIVE_LOW
+ SYSCON_SYSCLKREQ_ACTIVE_LOW,
+ SYSCON_SYSCLKREQ_MONITOR
};
enum syscon_clk_mode {
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
+#include <linux/amba/mmci.h>
-#include <asm/mach/mmc.h>
#include "mmc.h"
+#include "padmux.h"
struct mmci_card_event {
struct input_dev *mmc_input;
int mmc_inserted;
struct work_struct workq;
- struct mmc_platform_data mmc0_plat_data;
+ struct mmci_platform_data mmc0_plat_data;
};
static unsigned int mmc_status(struct device *dev)
{
struct mmci_card_event *mmci_card;
struct device *mmcsd_device = &adev->dev;
+ struct pmx *pmx;
int ret = 0;
mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
mmci_card->mmc0_plat_data.status = mmc_status;
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
+ mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
input_set_drvdata(mmci_card->mmc_input, mmci_card);
+ /*
+ * Setup padmuxing for MMC. Since this must always be
+ * compiled into the kernel, pmx is never released.
+ */
+ pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
+
+ if (IS_ERR(pmx))
+ pr_warning("Could not get padmux handle\n");
+ else {
+ ret = pmx_activate(mmcsd_device, pmx);
+ if (IS_ERR_VALUE(ret))
+ pr_warning("Could not activate padmuxing\n");
+ }
+
ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
mmci_card);
* Copyright (C) 2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* U300 PADMUX functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
*/
-#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <mach/u300-regs.h>
#include <mach/syscon.h>
-
#include "padmux.h"
-/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
-void pmx_set_mission_mode_mmc(void)
-{
- u16 val;
-
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
- val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
- val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
- val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-}
-
-void pmx_set_mission_mode_spi(void)
-{
- u16 val;
-
- /* Set up padmuxing so the SPI port and its chipselects are active */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
- /*
- * Activate the SPI port (disable the use of these pins for generic
- * GPIO, DSP, AAIF
- */
- val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
- val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
- /*
- * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
- * things also)
- */
- val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
- val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
- /*
- * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
- * things also)
- */
- val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
- val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+static DEFINE_MUTEX(pmx_mutex);
+
+const u32 pmx_registers[] = {
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
+};
+
+/* High level functionality */
+
+/* Lazy dog:
+ * onmask = {
+ * {"PMC1LR" mask, "PMC1LR" value},
+ * {"PMC1HR" mask, "PMC1HR" value},
+ * {"PMC2R" mask, "PMC2R" value},
+ * {"PMC3R" mask, "PMC3R" value},
+ * {"PMC4R" mask, "PMC4R" value}
+ * }
+ */
+static struct pmx mmc_setting = {
+ .setting = U300_APP_PMX_MMC_SETTING,
+ .default_on = false,
+ .activated = false,
+ .name = "MMC",
+ .onmask = {
+ {U300_SYSCON_PMC1LR_MMCSD_MASK,
+ U300_SYSCON_PMC1LR_MMCSD_MMCSD},
+ {0, 0},
+ {0, 0},
+ {0, 0},
+ {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
+ U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
+ },
+};
+
+static struct pmx spi_setting = {
+ .setting = U300_APP_PMX_SPI_SETTING,
+ .default_on = false,
+ .activated = false,
+ .name = "SPI",
+ .onmask = {{0, 0},
+ {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
+ U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
+ {0, 0},
+ {0, 0},
+ {0, 0}
+ },
+};
+
+/* Available padmux settings */
+static struct pmx *pmx_settings[] = {
+ &mmc_setting,
+ &spi_setting,
+};
+
+static void update_registers(struct pmx *pmx, bool activate)
+{
+ u16 regval, val, mask;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
+ if (activate)
+ val = pmx->onmask[i].val;
+ else
+ val = 0;
+
+ mask = pmx->onmask[i].mask;
+ if (mask != 0) {
+ regval = readw(pmx_registers[i]);
+ regval &= ~mask;
+ regval |= val;
+ writew(regval, pmx_registers[i]);
+ }
+ }
+}
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
+{
+ int i;
+ struct pmx *pmx = ERR_PTR(-ENOENT);
+
+ if (dev == NULL)
+ return ERR_PTR(-EINVAL);
+
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (setting == pmx_settings[i]->setting) {
+
+ if (pmx_settings[i]->dev != NULL) {
+ WARN(1, "padmux: required setting "
+ "in use by another consumer\n");
+ } else {
+ pmx = pmx_settings[i];
+ pmx->dev = dev;
+ dev_dbg(dev, "padmux: setting nr %d is now "
+ "bound to %s and ready to use\n",
+ setting, dev_name(dev));
+ break;
+ }
+ }
+ }
+ mutex_unlock(&pmx_mutex);
+
+ return pmx;
+}
+EXPORT_SYMBOL(pmx_get);
+
+int pmx_put(struct device *dev, struct pmx *pmx)
+{
+ int i;
+ int ret = -ENOENT;
+
+ if (pmx == NULL || dev == NULL)
+ return -EINVAL;
+
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (pmx->setting == pmx_settings[i]->setting) {
+
+ if (dev != pmx->dev) {
+ WARN(1, "padmux: cannot release handle as "
+ "it is bound to another consumer\n");
+ ret = -EINVAL;
+ break;
+ } else {
+ pmx_settings[i]->dev = NULL;
+ ret = 0;
+ break;
+ }
+ }
+ }
+ mutex_unlock(&pmx_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(pmx_put);
+
+int pmx_activate(struct device *dev, struct pmx *pmx)
+{
+ int i, j, ret;
+ ret = 0;
+
+ if (pmx == NULL || dev == NULL)
+ return -EINVAL;
+
+ mutex_lock(&pmx_mutex);
+
+ /* Make sure the required bits are not used */
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+ if (pmx_settings[i]->onmask[j].mask & pmx->
+ onmask[j].mask) {
+ /* More than one entry on the same bits */
+ WARN(1, "padmux: cannot activate "
+ "setting. Bit conflict with "
+ "an active setting\n");
+
+ ret = -EUSERS;
+ goto exit;
+ }
+ }
+ }
+ update_registers(pmx, true);
+ pmx->activated = true;
+ dev_dbg(dev, "padmux: setting nr %d is activated\n",
+ pmx->setting);
+
+exit:
+ mutex_unlock(&pmx_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(pmx_activate);
+
+int pmx_deactivate(struct device *dev, struct pmx *pmx)
+{
+ int i;
+ int ret = -ENOENT;
+
+ if (pmx == NULL || dev == NULL)
+ return -EINVAL;
+
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (pmx_settings[i]->dev == NULL)
+ continue;
+
+ if (pmx->setting == pmx_settings[i]->setting) {
+
+ if (dev != pmx->dev) {
+ WARN(1, "padmux: cannot deactivate "
+ "pmx setting as it was activated "
+ "by another consumer\n");
+
+ ret = -EBUSY;
+ continue;
+ } else {
+ update_registers(pmx, false);
+ pmx_settings[i]->dev = NULL;
+ pmx->activated = false;
+ ret = 0;
+ dev_dbg(dev, "padmux: setting nr %d is deactivated",
+ pmx->setting);
+ break;
+ }
+ }
+ }
+ mutex_unlock(&pmx_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(pmx_deactivate);
+
+/*
+ * For internal use only. If it is to be exported,
+ * it should be reentrant. Notice that pmx_activate
+ * (i.e. runtime settings) always override default settings.
+ */
+static int pmx_set_default(void)
+{
+ /* Used to identify several entries on the same bits */
+ u16 modbits[ARRAY_SIZE(pmx_registers)];
+
+ int i, j;
+
+ memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
+
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (!pmx_settings[i]->default_on)
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+ /* Make sure there is only one entry on the same bits */
+ if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
+ BUG();
+ return -EUSERS;
+ }
+ modbits[j] |= pmx_settings[i]->onmask[j].mask;
+ }
+ update_registers(pmx_settings[i], true);
+ }
+ return 0;
}
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+static int pmx_show(struct seq_file *s, void *data)
+{
+ int i;
+ seq_printf(s, "-------------------------------------------------\n");
+ seq_printf(s, "SETTING BOUND TO DEVICE STATE\n");
+ seq_printf(s, "-------------------------------------------------\n");
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+ /* Format pmx and device name nicely */
+ char cdp[33];
+ int chars;
+
+ chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
+ while (chars < 16) {
+ cdp[chars] = ' ';
+ chars++;
+ }
+ chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
+ dev_name(pmx_settings[i]->dev) : "N/A");
+ while (chars < 16) {
+ cdp[chars+16] = ' ';
+ chars++;
+ }
+ cdp[32] = '\0';
+
+ seq_printf(s,
+ "%s\t%s\n",
+ &cdp[0],
+ pmx_settings[i]->activated ?
+ "ACTIVATED" : "DEACTIVATED"
+ );
+
+ }
+ mutex_unlock(&pmx_mutex);
+ return 0;
+}
+
+static int pmx_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmx_show, NULL);
+}
+
+static const struct file_operations pmx_operations = {
+ .owner = THIS_MODULE,
+ .open = pmx_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init init_pmx_read_debugfs(void)
+{
+ /* Expose a simple debugfs interface to view pmx settings */
+ (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
+ NULL, NULL,
+ &pmx_operations);
+ return 0;
+}
+
+/*
+ * This needs to come in after the core_initcall(),
+ * because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_pmx_read_debugfs);
+#endif
+
+static int __init pmx_init(void)
+{
+ int ret;
+
+ ret = pmx_set_default();
+
+ if (IS_ERR_VALUE(ret))
+ pr_crit("padmux: default settings could not be set\n");
+
+ return 0;
+}
+
+/* Should be initialized before consumers */
+core_initcall(pmx_init);
* Copyright (C) 2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* U300 PADMUX API
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
*/
#ifndef __MACH_U300_PADMUX_H
#define __MACH_U300_PADMUX_H
-void pmx_set_mission_mode_mmc(void);
-void pmx_set_mission_mode_spi(void);
+enum pmx_settings {
+ U300_APP_PMX_MMC_SETTING,
+ U300_APP_PMX_SPI_SETTING
+};
+
+struct pmx_onmask {
+ u16 mask; /* Mask bits */
+ u16 val; /* Value when active */
+};
+
+struct pmx {
+ struct device *dev;
+ enum pmx_settings setting;
+ char *name;
+ bool activated;
+ bool default_on;
+ struct pmx_onmask onmask[];
+};
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
+int pmx_put(struct device *dev, struct pmx *pmx);
+int pmx_activate(struct device *dev, struct pmx *pmx);
+int pmx_deactivate(struct device *dev, struct pmx *pmx);
#endif
--- /dev/null
+/*
+ * arch/arm/mach-u300/spi.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/spi/spi.h>
+#include <linux/amba/pl022.h>
+#include <linux/err.h>
+#include "padmux.h"
+
+/*
+ * The following is for the actual devices on the SSP/SPI bus
+ */
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+static void select_dummy_chip(u32 chipselect)
+{
+ pr_debug("CORE: %s called with CS=0x%x (%s)\n",
+ __func__,
+ chipselect,
+ chipselect ? "unselect chip" : "select chip");
+ /*
+ * Here you would write the chip select value to the GPIO pins if
+ * this was a real chip (but this is a loopback dummy).
+ */
+}
+
+struct pl022_config_chip dummy_chip_info = {
+ /* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
+ .lbm = LOOPBACK_ENABLED,
+ /*
+ * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
+ * DMA_TRANSFER does not work
+ */
+ .com_mode = INTERRUPT_TRANSFER,
+ .iface = SSP_INTERFACE_MOTOROLA_SPI,
+ /* We can only act as master but SSP_SLAVE is possible in theory */
+ .hierarchy = SSP_MASTER,
+ /* 0 = drive TX even as slave, 1 = do not drive TX as slave */
+ .slave_tx_disable = 0,
+ /* LSB first */
+ .endian_tx = SSP_TX_LSB,
+ .endian_rx = SSP_RX_LSB,
+ .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
+ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+ .clk_phase = SSP_CLK_SECOND_EDGE,
+ .clk_pol = SSP_CLK_POL_IDLE_LOW,
+ .ctrl_len = SSP_BITS_12,
+ .wait_state = SSP_MWIRE_WAIT_ZERO,
+ .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+ /*
+ * This is where you insert a call to a function to enable CS
+ * (usually GPIO) for a certain chip.
+ */
+ .cs_control = select_dummy_chip,
+};
+#endif
+
+static struct spi_board_info u300_spi_devices[] = {
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+ {
+ /* A dummy chip used for loopback tests */
+ .modalias = "spi-dummy",
+ /* Really dummy, pass in additional chip config here */
+ .platform_data = NULL,
+ /* This defines how the controller shall handle the device */
+ .controller_data = &dummy_chip_info,
+ /* .irq - no external IRQ routed from this device */
+ .max_speed_hz = 1000000,
+ .bus_num = 0, /* Only one bus on this chip */
+ .chip_select = 0,
+ /* Means SPI_CS_HIGH, change if e.g low CS */
+ .mode = 0,
+ },
+#endif
+};
+
+static struct pl022_ssp_controller ssp_platform_data = {
+ /* If you have several SPI buses this varies, we have only bus 0 */
+ .bus_id = 0,
+ /* Set this to 1 when we think we got DMA working */
+ .enable_dma = 0,
+ /*
+ * On the APP CPU GPIO 4, 5 and 6 are connected as generic
+ * chip selects for SPI. (Same on U330, U335 and U365.)
+ * TODO: make sure the GPIO driver can select these properly
+ * and do padmuxing accordingly too.
+ */
+ .num_chipselect = 3,
+};
+
+
+void __init u300_spi_init(struct amba_device *adev)
+{
+ struct pmx *pmx;
+
+ adev->dev.platform_data = &ssp_platform_data;
+ /*
+ * Setup padmuxing for SPI. Since this must always be
+ * compiled into the kernel, pmx is never released.
+ */
+ pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
+
+ if (IS_ERR(pmx))
+ dev_warn(&adev->dev, "Could not get padmux handle\n");
+ else {
+ int ret;
+
+ ret = pmx_activate(&adev->dev, pmx);
+ if (IS_ERR_VALUE(ret))
+ dev_warn(&adev->dev, "Could not activate padmuxing\n");
+ }
+
+}
+void __init u300_spi_register_board_devices(void)
+{
+ /* Register any SPI devices */
+ spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
+}
--- /dev/null
+/*
+ * arch/arm/mach-u300/spi.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef SPI_H
+#define SPI_H
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_SPI_PL022
+void __init u300_spi_init(struct amba_device *adev);
+void __init u300_spi_register_board_devices(void);
+#else
+/* Compile out SPI support if PL022 is not selected */
+static inline void __init u300_spi_init(struct amba_device *adev)
+{
+}
+static inline void __init u300_spi_register_board_devices(void)
+{
+}
+#endif
+
+#endif
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+unsigned long long notrace sched_clock(void)
+{
+ return clocksource_cyc2ns(clocksource_u300_1mhz.read(
+ &clocksource_u300_1mhz),
+ clocksource_u300_1mhz.mult,
+ clocksource_u300_1mhz.shift);
+}
+
/*
* This sets up the system timers, clock source and clock event.
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/cnt32_to_63.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include "core.h"
#include "clock.h"
return readl(VERSATILE_SYSMCI) & mask;
}
-static struct mmc_platform_data mmc0_plat_data = {
+static struct mmci_platform_data mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/mmc.h>
#include "core.h"
#define IRQ_MMCI1A IRQ_SIC_MMCI1A
#endif
-static struct mmc_platform_data mmc1_plat_data = {
+static struct mmci_platform_data mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
select OUTER_CACHE
help
This option enables the L2 cache on XScale3.
+
+config ARM_L1_CACHE_SHIFT
+ int
+ default 6 if ARCH_OMAP3
+ default 5
}
spin_unlock(&cpu_asid_lock);
- mm->cpu_vm_mask = cpumask_of_cpu(smp_processor_id());
+ cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
mm->context.id = asid;
}
#include "fault.h"
+/*
+ * Fault status register encodings. We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF (1 << 31)
+#define FSR_WRITE (1 << 11)
+#define FSR_FS4 (1 << 10)
+#define FSR_FS3_0 (15)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+ return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+
#ifdef CONFIG_MMU
#ifdef CONFIG_KPROBES
#define VM_FAULT_BADMAP 0x010000
#define VM_FAULT_BADACCESS 0x020000
-static int
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+ unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+ if (fsr & FSR_WRITE)
+ mask = VM_WRITE;
+ if (fsr & FSR_LNX_PF)
+ mask = VM_EXEC;
+
+ return vma->vm_flags & mask ? false : true;
+}
+
+static int __kprobes
__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
struct task_struct *tsk)
{
struct vm_area_struct *vma;
- int fault, mask;
+ int fault;
vma = find_vma(mm, addr);
fault = VM_FAULT_BADMAP;
- if (!vma)
+ if (unlikely(!vma))
goto out;
- if (vma->vm_start > addr)
+ if (unlikely(vma->vm_start > addr))
goto check_stack;
/*
* memory access, so we can handle it.
*/
good_area:
- if (fsr & (1 << 11)) /* write? */
- mask = VM_WRITE;
- else
- mask = VM_READ|VM_EXEC|VM_WRITE;
-
- fault = VM_FAULT_BADACCESS;
- if (!(vma->vm_flags & mask))
+ if (access_error(fsr, vma)) {
+ fault = VM_FAULT_BADACCESS;
goto out;
+ }
/*
- * If for any reason at all we couldn't handle
- * the fault, make sure we exit gracefully rather
- * than endlessly redo the fault.
+ * If for any reason at all we couldn't handle the fault, make
+ * sure we exit gracefully rather than endlessly redo the fault.
*/
-survive:
- fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR)) {
- if (fault & VM_FAULT_OOM)
- goto out_of_memory;
- else if (fault & VM_FAULT_SIGBUS)
- return fault;
- BUG();
- }
+ fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
+ if (unlikely(fault & VM_FAULT_ERROR))
+ return fault;
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
return fault;
-out_of_memory:
- if (!is_global_init(tsk))
- goto out;
-
- /*
- * If we are out of memory for pid1, sleep for a while and retry
- */
- up_read(&mm->mmap_sem);
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
-
check_stack:
if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
goto good_area;
if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
goto no_context;
down_read(&mm->mmap_sem);
+ } else {
+ /*
+ * The above down_read_trylock() might have succeeded in
+ * which case, we'll have missed the might_sleep() from
+ * down_read()
+ */
+ might_sleep();
}
fault = __do_page_fault(mm, addr, fsr, tsk);
if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
return 0;
+ if (fault & VM_FAULT_OOM) {
+ /*
+ * We ran out of memory, call the OOM killer, and return to
+ * userspace (which will retry the fault, or kill us if we
+ * got oom-killed)
+ */
+ pagefault_out_of_memory();
+ return 0;
+ }
+
/*
* If we are in kernel mode at this point, we
* have no context to handle this fault with.
if (!user_mode(regs))
goto no_context;
- if (fault & VM_FAULT_OOM) {
- /*
- * We ran out of memory, or some other thing
- * happened to us that made us unable to handle
- * the page fault gracefully.
- */
- printk("VM: killing process %s\n", tsk->comm);
- do_group_exit(SIGKILL);
- return 0;
- }
if (fault & VM_FAULT_SIGBUS) {
/*
* We had some memory, but were unable to
asmlinkage void __exception
do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
- const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+ const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
struct siginfo info;
- if (!inf->fn(addr, fsr, regs))
+ if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
return;
printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
asmlinkage void __exception
do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
{
- do_translation_fault(addr, 0, regs);
+ do_translation_fault(addr, FSR_LNX_PF, regs);
}
void flush_cache_mm(struct mm_struct *mm)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
__cpuc_flush_user_all();
return;
}
void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
vma->vm_flags);
return;
void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = user_addr & PAGE_MASK;
__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
}
unsigned long len, int write)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = (unsigned long)kaddr;
__cpuc_coherent_kern_range(addr, addr + len);
}
}
/* VIPT non-aliasing cache */
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
vma->vm_flags & VM_EXEC) {
unsigned long addr = (unsigned long)kaddr;
/* only flushing the kernel mapping on non-aliasing VIPT */
void free_initmem(void)
{
+#ifdef CONFIG_HAVE_TCM
+ extern char *__tcm_start, *__tcm_end;
+
+ totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
+ __phys_to_pfn(__pa(__tcm_end)),
+ "TCM link");
+#endif
+
if (!machine_is_integrator() && !machine_is_cintegrator())
totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
__phys_to_pfn(__pa(__init_end)),
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
#else
dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_0_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
#endif
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
#else
dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_1_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
#endif
dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
#else
dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
- dma_cap_set(DMA_ZERO_SUM, iop3xx_aau_data.cap_mask);
+ dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask);
dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
#endif
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/irq.h>
+#include <asm/memory.h>
#include <mach/hardware.h>
#include <mach/dma.h>
+#define DMA_DEBUG_NAME "pxa_dma"
+#define DMA_MAX_REQUESTERS 64
+
struct dma_channel {
char *name;
pxa_dma_prio prio;
void (*irq_handler)(int, void *);
void *data;
+ spinlock_t lock;
};
static struct dma_channel *dma_channels;
static int num_dma_channels;
+/*
+ * Debug fs
+ */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
+
+static int dbg_show_requester_chan(struct seq_file *s, void *p)
+{
+ int pos = 0;
+ int chan = (int)s->private;
+ int i;
+ u32 drcmr;
+
+ pos += seq_printf(s, "DMA channel %d requesters list :\n", chan);
+ for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
+ drcmr = DRCMR(i);
+ if ((drcmr & DRCMR_CHLNUM) == chan)
+ pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
+ !!(drcmr & DRCMR_MAPVLD));
+ }
+ return pos;
+}
+
+static inline int dbg_burst_from_dcmd(u32 dcmd)
+{
+ int burst = (dcmd >> 16) & 0x3;
+
+ return burst ? 4 << burst : 0;
+}
+
+static int is_phys_valid(unsigned long addr)
+{
+ return pfn_valid(__phys_to_pfn(addr));
+}
+
+#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
+#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
+
+static int dbg_show_descriptors(struct seq_file *s, void *p)
+{
+ int pos = 0;
+ int chan = (int)s->private;
+ int i, max_show = 20, burst, width;
+ u32 dcmd;
+ unsigned long phys_desc;
+ struct pxa_dma_desc *desc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma_channels[chan].lock, flags);
+ phys_desc = DDADR(chan);
+
+ pos += seq_printf(s, "DMA channel %d descriptors :\n", chan);
+ pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0);
+ for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
+ desc = phys_to_virt(phys_desc);
+ dcmd = desc->dcmd;
+ burst = dbg_burst_from_dcmd(dcmd);
+ width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+ pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
+ i, phys_desc, desc);
+ pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
+ pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
+ pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
+ pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d"
+ " width=%d len=%d)\n",
+ dcmd,
+ DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+ DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+ DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+ DCMD_STR(ENDIAN), burst, width,
+ dcmd & DCMD_LENGTH);
+ phys_desc = desc->ddadr;
+ }
+ if (i == max_show)
+ pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
+ i, phys_desc);
+ else
+ pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n",
+ i, phys_desc, phys_desc == DDADR_STOP ?
+ "DDADR_STOP" : "invalid");
+
+ spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
+ return pos;
+}
+
+static int dbg_show_chan_state(struct seq_file *s, void *p)
+{
+ int pos = 0;
+ int chan = (int)s->private;
+ u32 dcsr, dcmd;
+ int burst, width;
+ static char *str_prio[] = { "high", "normal", "low" };
+
+ dcsr = DCSR(chan);
+ dcmd = DCMD(chan);
+ burst = dbg_burst_from_dcmd(dcmd);
+ width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+ pos += seq_printf(s, "DMA channel %d\n", chan);
+ pos += seq_printf(s, "\tPriority : %s\n",
+ str_prio[dma_channels[chan].prio]);
+ pos += seq_printf(s, "\tUnaligned transfer bit: %s\n",
+ DALGN & (1 << chan) ? "yes" : "no");
+ pos += seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+ dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
+ DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
+ DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
+ DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
+ DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
+ DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
+ DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
+
+ pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d"
+ " len=%d)\n",
+ dcmd,
+ DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+ DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+ DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+ DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
+ pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
+ pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
+ pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
+ return pos;
+}
+
+static int dbg_show_state(struct seq_file *s, void *p)
+{
+ int pos = 0;
+
+ /* basic device status */
+ pos += seq_printf(s, "DMA engine status\n");
+ pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
+
+ return pos;
+}
+
+#define DBGFS_FUNC_DECL(name) \
+static int dbg_open_##name(struct inode *inode, struct file *file) \
+{ \
+ return single_open(file, dbg_show_##name, inode->i_private); \
+} \
+static const struct file_operations dbg_fops_##name = { \
+ .owner = THIS_MODULE, \
+ .open = dbg_open_##name, \
+ .llseek = seq_lseek, \
+ .read = seq_read, \
+ .release = single_release, \
+}
+
+DBGFS_FUNC_DECL(state);
+DBGFS_FUNC_DECL(chan_state);
+DBGFS_FUNC_DECL(descriptors);
+DBGFS_FUNC_DECL(requester_chan);
+
+static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
+{
+ char chan_name[11];
+ struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
+ struct dentry *chan_reqs = NULL;
+ void *dt;
+
+ scnprintf(chan_name, sizeof(chan_name), "%d", ch);
+ chan = debugfs_create_dir(chan_name, chandir);
+ dt = (void *)ch;
+
+ if (chan)
+ chan_state = debugfs_create_file("state", 0400, chan, dt,
+ &dbg_fops_chan_state);
+ if (chan_state)
+ chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
+ &dbg_fops_descriptors);
+ if (chan_descr)
+ chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
+ &dbg_fops_requester_chan);
+ if (!chan_reqs)
+ goto err_state;
+
+ return chan;
+
+err_state:
+ debugfs_remove_recursive(chan);
+ return NULL;
+}
+
+static void pxa_dma_init_debugfs(void)
+{
+ int i;
+ struct dentry *chandir;
+
+ dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
+ if (IS_ERR(dbgfs_root) || !dbgfs_root)
+ goto err_root;
+
+ dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
+ &dbg_fops_state);
+ if (!dbgfs_state)
+ goto err_state;
+
+ dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
+ GFP_KERNEL);
+ if (!dbgfs_state)
+ goto err_alloc;
+
+ chandir = debugfs_create_dir("channels", dbgfs_root);
+ if (!chandir)
+ goto err_chandir;
+
+ for (i = 0; i < num_dma_channels; i++) {
+ dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
+ if (!dbgfs_chan[i])
+ goto err_chans;
+ }
+
+ return;
+err_chans:
+err_chandir:
+ kfree(dbgfs_chan);
+err_alloc:
+err_state:
+ debugfs_remove_recursive(dbgfs_root);
+err_root:
+ pr_err("pxa_dma: debugfs is not available\n");
+}
+
+static void __exit pxa_dma_cleanup_debugfs(void)
+{
+ debugfs_remove_recursive(dbgfs_root);
+}
+#else
+static inline void pxa_dma_init_debugfs(void) {}
+static inline void pxa_dma_cleanup_debugfs(void) {}
+#endif
+
int pxa_request_dma (char *name, pxa_dma_prio prio,
void (*irq_handler)(int, void *),
void *data)
local_irq_restore(flags);
return i;
}
+EXPORT_SYMBOL(pxa_request_dma);
void pxa_free_dma (int dma_ch)
{
dma_channels[dma_ch].name = NULL;
local_irq_restore(flags);
}
+EXPORT_SYMBOL(pxa_free_dma);
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
int i, dint = DINT;
+ struct dma_channel *channel;
- for (i = 0; i < num_dma_channels; i++) {
- if (dint & (1 << i)) {
- struct dma_channel *channel = &dma_channels[i];
- if (channel->name && channel->irq_handler) {
- channel->irq_handler(i, channel->data);
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
- DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
- }
+ while (dint) {
+ i = __ffs(dint);
+ dint &= (dint - 1);
+ channel = &dma_channels[i];
+ if (channel->name && channel->irq_handler) {
+ channel->irq_handler(i, channel->data);
+ } else {
+ /*
+ * IRQ for an unregistered DMA channel:
+ * let's clear the interrupts and disable it.
+ */
+ printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+ DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
}
}
return IRQ_HANDLED;
for (i = 0; i < num_ch; i++) {
DCSR(i) = 0;
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+ spin_lock_init(&dma_channels[i].lock);
}
ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
kfree(dma_channels);
return ret;
}
-
num_dma_channels = num_ch;
+
+ pxa_dma_init_debugfs();
+
return 0;
}
-
-EXPORT_SYMBOL(pxa_request_dma);
-EXPORT_SYMBOL(pxa_free_dma);
MFP_PIN_GPIO125,
MFP_PIN_GPIO126,
MFP_PIN_GPIO127,
+
+ MFP_PIN_GPIO128,
+ MFP_PIN_GPIO129,
+ MFP_PIN_GPIO130,
+ MFP_PIN_GPIO131,
+ MFP_PIN_GPIO132,
+ MFP_PIN_GPIO133,
+ MFP_PIN_GPIO134,
+ MFP_PIN_GPIO135,
+ MFP_PIN_GPIO136,
+ MFP_PIN_GPIO137,
+ MFP_PIN_GPIO138,
+ MFP_PIN_GPIO139,
+ MFP_PIN_GPIO140,
+ MFP_PIN_GPIO141,
+ MFP_PIN_GPIO142,
+ MFP_PIN_GPIO143,
+ MFP_PIN_GPIO144,
+ MFP_PIN_GPIO145,
+ MFP_PIN_GPIO146,
+ MFP_PIN_GPIO147,
+ MFP_PIN_GPIO148,
+ MFP_PIN_GPIO149,
+ MFP_PIN_GPIO150,
+ MFP_PIN_GPIO151,
+ MFP_PIN_GPIO152,
+ MFP_PIN_GPIO153,
+ MFP_PIN_GPIO154,
+ MFP_PIN_GPIO155,
+ MFP_PIN_GPIO156,
+ MFP_PIN_GPIO157,
+ MFP_PIN_GPIO158,
+ MFP_PIN_GPIO159,
+ MFP_PIN_GPIO160,
+ MFP_PIN_GPIO161,
+ MFP_PIN_GPIO162,
+ MFP_PIN_GPIO163,
+ MFP_PIN_GPIO164,
+ MFP_PIN_GPIO165,
+ MFP_PIN_GPIO166,
+ MFP_PIN_GPIO167,
+ MFP_PIN_GPIO168,
+ MFP_PIN_GPIO169,
+ MFP_PIN_GPIO170,
+ MFP_PIN_GPIO171,
+ MFP_PIN_GPIO172,
+ MFP_PIN_GPIO173,
+ MFP_PIN_GPIO174,
+ MFP_PIN_GPIO175,
+ MFP_PIN_GPIO176,
+ MFP_PIN_GPIO177,
+ MFP_PIN_GPIO178,
+ MFP_PIN_GPIO179,
+ MFP_PIN_GPIO180,
+ MFP_PIN_GPIO181,
+ MFP_PIN_GPIO182,
+ MFP_PIN_GPIO183,
+ MFP_PIN_GPIO184,
+ MFP_PIN_GPIO185,
+ MFP_PIN_GPIO186,
+ MFP_PIN_GPIO187,
+ MFP_PIN_GPIO188,
+ MFP_PIN_GPIO189,
+ MFP_PIN_GPIO190,
+ MFP_PIN_GPIO191,
+
+ MFP_PIN_GPIO255 = 255,
+
MFP_PIN_GPIO0_2,
MFP_PIN_GPIO1_2,
MFP_PIN_GPIO2_2,
#define MFP_PULL_LOW (0x1 << 21)
#define MFP_PULL_HIGH (0x2 << 21)
#define MFP_PULL_BOTH (0x3 << 21)
-#define MFP_PULL_MASK (0x3 << 21)
-#define MFP_PULL(x) (((x) >> 21) & 0x3)
+#define MFP_PULL_FLOAT (0x4 << 21)
+#define MFP_PULL_MASK (0x7 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x7)
#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
* MFPR_PULL_LOW 1 0 1
* MFPR_PULL_HIGH 1 1 0
* MFPR_PULL_BOTH 1 1 1
+ * MFPR_PULL_FLOAT 1 0 0
*/
#define MFPR_PULL_NONE (0)
#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT (MFPR_PULL_SEL)
/* mfp_spin_lock is used to ensure that MFP register configuration
* (most likely a read-modify-write operation) is atomic, and that
MFPR_PULL_LOW,
MFPR_PULL_HIGH,
MFPR_PULL_BOTH,
+ MFPR_PULL_FLOAT,
};
/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
gpn = chip->chip.base;
for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
- BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+ BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
s3c_gpios[gpn] = chip;
}
}
if (!chan)
return -EINVAL;
- buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+ buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
if (!buff) {
printk(KERN_ERR "%s: no memory for buffer\n", __func__);
return -ENOMEM;
}
- lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+ lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
if (!lli) {
printk(KERN_ERR "%s: no memory for lli\n", __func__);
ret = -ENOMEM;
printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
- dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+ dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
if (!dma_pool) {
printk(KERN_ERR "%s: failed to create pool\n", __func__);
return -ENOMEM;
struct s3c64xx_dma_buff *next;
void *pw;
- struct pl080_lli *lli;
+ struct pl080s_lli *lli;
dma_addr_t lli_dma;
};
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#define IRQ_BOARD_NR 16
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#define NR_IRQS (IRQ_BOARD_END + 1)
#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
return -EINVAL;
val = __raw_readl(reg);
- val &= ~(0xf << sclk->shift);
- val |= (div - 1) << sclk->shift;
+ val &= ~(0xf << sclk->divider_shift);
+ val |= (div - 1) << sclk->divider_shift;
__raw_writel(val, reg);
return 0;
clksrc |= src_nr << sclk->shift;
__raw_writel(clksrc, S3C_CLK_SRC);
+
+ clk->parent = parent;
return 0;
}
if (rate > parent_rate)
rate = parent_rate;
else {
- div = rate / parent_rate;
+ div = parent_rate / rate;
if (div == 0)
div = 1;
stmp3xxx_dma_free_command(ch,
&descriptors
[i]);
- } while (i-- >= 0);
+ } while (i-- > 0);
}
return err;
}
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Sep 12 12:00:16 2009
+# Last update: Fri Sep 18 21:42:00 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
aml_m8050 MACH_AML_M8050 AML_M8050 1644
mx35_3ds MACH_MX35_3DS MX35_3DS 1645
mars MACH_MARS MARS 1646
-ntosd_644xa MACH_NTOSD_644XA NTOSD_644XA 1647
+neuros_osd2 MACH_NEUROS_OSD2 NEUROS_OSD2 1647
badger MACH_BADGER BADGER 1648
trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649
trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650
zoran43xx MACH_ZORAN43XX ZORAN43XX 1660
sonix926 MACH_SONIX926 SONIX926 1661
celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662
-cc9m2443 MACH_CC9M2443 CC9M2443 1663
+cc9m2443js MACH_CC9M2443JS CC9M2443JS 1663
tw5334 MACH_TW5334 TW5334 1664
omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665
nal_hlite MACH_NAL_HLITE NAL_HLITE 1666
rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812
sifmain MACH_SIFMAIN SIFMAIN 1813
sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814
-cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815
+cc9m2443 MACH_CC9M2443 CC9M2443 1815
xaria300 MACH_XARIA300 XARIA300 1816
it9200 MACH_IT9200 IT9200 1817
rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818
pss2 MACH_PSS2 PSS2 2423
davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424
str9100 MACH_STR9100 STR9100 2425
+net5big MACH_NET5BIG NET5BIG 2426
+seabed9263 MACH_SEABED9263 SEABED9263 2427
+mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428
+octvocplus_eb MACH_OCTVOCPLUS_EB OCTVOCPLUS_EB 2429
+klk_firefox MACH_KLK_FIREFOX KLK_FIREFOX 2430
+klk_wirma_module MACH_KLK_WIRMA_MODULE KLK_WIRMA_MODULE 2431
+klk_wirma_mmi MACH_KLK_WIRMA_MMI KLK_WIRMA_MMI 2432
+supersonic MACH_SUPERSONIC SUPERSONIC 2433
+liberty MACH_LIBERTY LIBERTY 2434
+mh355 MACH_MH355 MH355 2435
+pc7802 MACH_PC7802 PC7802 2436
+gnet_sgc MACH_GNET_SGC GNET_SGC 2437
/*
* Initial thread structure. Must be aligned on an 8192-byte boundary.
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#include <asm/setup.h>
#include <asm/sections.h>
-#define __page_aligned __attribute__((section(".data.page_aligned")))
-
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_data;
struct page *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);
echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
echo ' install - Install kernel using'
- echo ' (your) ~/bin/$(CROSS_COMPILE)installkernel or'
- echo ' (distribution) PATH: $(CROSS_COMPILE)installkernel or'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) PATH: $(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH)'
endef
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if which ${CROSS_COMPILE}installkernel >/dev/null 2>&1; then
- exec ${CROSS_COMPILE}installkernel "$@"
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if which ${INSTALLKERNEL} >/dev/null 2>&1; then
+ exec ${INSTALLKERNEL} "$@"
fi
# Default install - same as make zlilo
{
__sdata = .;
/* This gets done first, so the glob doesn't suck it in */
- . = ALIGN(32);
- *(.data.cacheline_aligned)
+ CACHELINE_ALIGNED_DATA(32)
#if !L1_DATA_A_LENGTH
. = ALIGN(32);
DATA_DATA
CONSTRUCTORS
- /* make sure the init_task is aligned to the
- * kernel thread size so we can locate the kernel
- * stack properly and quickly.
- */
- . = ALIGN(THREAD_SIZE);
- *(.init_task.data)
+ INIT_TASK_DATA(THREAD_SIZE)
__edata = .;
}
. = ALIGN(PAGE_SIZE);
___init_begin = .;
- .init.text :
- {
- . = ALIGN(PAGE_SIZE);
- __sinittext = .;
- INIT_TEXT
- __einittext = .;
- }
- .init.data :
- {
- . = ALIGN(16);
- INIT_DATA
- }
- .init.setup :
- {
- . = ALIGN(16);
- ___setup_start = .;
- *(.init.setup)
- ___setup_end = .;
- }
- .initcall.init :
- {
- ___initcall_start = .;
- INITCALLS
- ___initcall_end = .;
- }
- .con_initcall.init :
- {
- ___con_initcall_start = .;
- *(.con_initcall.init)
- ___con_initcall_end = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ . = ALIGN(16);
+ INIT_DATA_SECTION(16)
PERCPU(4)
- SECURITY_INIT
/* we have to discard exit text and such at runtime, not link time, to
* handle embedded cross-section references (alt instructions, bug
EXIT_DATA
}
- .init.ramfs :
- {
- . = ALIGN(4);
- ___initramfs_start = .;
- *(.init.ramfs)
- . = ALIGN(4);
- ___initramfs_end = .;
- }
-
__l1_lma_start = .;
- .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
+ .text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
{
. = ALIGN(4);
__stext_l1 = .;
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
-
KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc)
KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc)
KBUILD_CPPFLAGS += $(inc)
extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
extern int have_rtc;
unsigned long get_ns_in_jiffie(void)
static struct vm_area_struct* flush_vma;
static unsigned long flush_addr;
-extern int setup_irq(int, struct irqaction *);
-
/* Mode registers */
static unsigned long irq_regs[NR_CPUS] = {
regi_irq,
extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
extern int have_rtc;
#ifdef CONFIG_CPU_FREQ
},
};
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
struct crisv32_iopin crisv32_led_net0_green;
struct crisv32_iopin crisv32_led_net0_red;
}
};
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
struct crisv32_iopin crisv32_led_net0_green;
struct crisv32_iopin crisv32_led_net0_red;
/* CRIS PTE bits (see R_TLB_LO in the register description)
*
- * Bit: 31-13 12-------4 3 2 1 0
- * ________________________________________________
- * | pfn | reserved | global | valid | kernel | we |
- * |_____|__________|________|_______|________|_____|
+ * Bit: 31 30-13 12-------4 3 2 1 0
+ * _______________________________________________________
+ * | cache |pfn | reserved | global | valid | kernel | we |
+ * |_______|____|__________|________|_______|________|_____|
*
* (pfn = physical frame number)
*/
#define _PAGE_VALID (1<<2) /* page is valid */
#define _PAGE_SILENT_READ (1<<2) /* synonym */
#define _PAGE_GLOBAL (1<<3) /* global page - context is ignored */
+#define _PAGE_NO_CACHE (1<<31) /* part of the uncached memory map */
/* Bits the HW doesn't care about but the kernel uses them in SW */
/*
* CRISv32 PTE bits:
*
- * Bit: 31-13 12-5 4 3 2 1 0
- * +-----+------+--------+-------+--------+-------+---------+
- * | pfn | zero | global | valid | kernel | write | execute |
- * +-----+------+--------+-------+--------+-------+---------+
+ * Bit: 31 30-13 12-5 4 3 2 1 0
+ * +-------+-----+------+--------+-------+--------+-------+---------+
+ * | cache | pfn | zero | global | valid | kernel | write | execute |
+ * +-------+-----+------+--------+-------+--------+-------+---------+
*/
/*
#define _PAGE_VALID (1 << 3) /* Page is valid. */
#define _PAGE_SILENT_READ (1 << 3) /* Same as above. */
#define _PAGE_GLOBAL (1 << 4) /* Global page. */
+#define _PAGE_NO_CACHE (1 << 31) /* part of the uncached memory map */
+
/*
* The hardware doesn't care about these bits, but the kernel uses them in
#define __ASM_HARDIRQ_H
#include <asm/irq.h>
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
#define HARDIRQ_BITS 8
# error HARDIRQ_BITS is too low!
#endif
+#include <asm-generic/hardirq.h>
+
#endif /* __ASM_HARDIRQ_H */
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
+#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) | _PAGE_NO_CACHE))
+
/* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval
* __pte_page(pte_val) refers to the "virtual" DRAM interval
# Makefile for the linux kernel.
#
+CPPFLAGS_vmlinux.lds := -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
extra-y := vmlinux.lds
obj-y := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o
#include <asm/io.h>
-void ack_bad_irq(unsigned int irq)
-{
- printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
_etext = . ; /* End of text section. */
__etext = .;
- . = ALIGN(4); /* Exception table. */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ EXCEPTION_TABLE(4)
RODATA
__edata = . ; /* End of data section. */
_edata = . ;
- . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */
- .data.init_task : { *(.data.init_task) }
+ INIT_TASK_DATA_SECTION(PAGE_SIZE)
. = ALIGN(PAGE_SIZE); /* Init code and data. */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
.init.data : { INIT_DATA }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
+ .init.setup : { INIT_SETUP(16) }
#ifdef CONFIG_ETRAX_ARCH_V32
__start___param = .;
__param : { *(__param) }
__stop___param = .;
#endif
.initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
+ INIT_CALLS
}
.con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ CON_INITCALL
}
SECURITY_INIT
PERCPU(PAGE_SIZE)
.init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
+ INIT_RAM_FS
}
#endif
__init_end = .;
__data_end = . ; /* Move to _edata ? */
- __bss_start = .; /* BSS. */
- .bss : {
- *(COMMON)
- *(.bss)
- }
+ BSS_SECTION(0, 0, 0)
. = ALIGN (0x20);
_end = .;
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
/*
* Send us to sleep.
*/
-static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
+static int sysctl_pm_do_suspend(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int retval, mode;
}
-static int cmode_procctl(ctl_table *ctl, int write, struct file *filp,
+static int cmode_procctl(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int new_cmode;
if (!write)
- return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+ return proc_dointvec(ctl, write, buffer, lenp, fpos);
new_cmode = user_atoi(buffer, *lenp);
return 0;
}
-static int p0_procctl(ctl_table *ctl, int write, struct file *filp,
+static int p0_procctl(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int new_p0;
if (!write)
- return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+ return proc_dointvec(ctl, write, buffer, lenp, fpos);
new_p0 = user_atoi(buffer, *lenp);
return 1;
}
-static int cm_procctl(ctl_table *ctl, int write, struct file *filp,
+static int cm_procctl(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int new_cm;
if (!write)
- return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+ return proc_dointvec(ctl, write, buffer, lenp, fpos);
new_cm = user_atoi(buffer, *lenp);
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/syscalls.h>
#include <linux/ipc.h>
obj-y += pci-dma-nommu.o
endif
endif
+
+obj-$(CONFIG_MTD) += flash.o
--- /dev/null
+/* Flash mappings for the MB93090-MB00 motherboard
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define MB93090_BOOTROM_ADDR 0xFF000000 /* Boot ROM */
+#define MB93090_BOOTROM_SIZE (2 * 1024 * 1024)
+#define MB93090_USERROM_ADDR 0xFF200000 /* User ROM */
+#define MB93090_USERROM_SIZE (2 * 1024 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition mb93090_partitions[] = {
+ {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ }
+};
+
+/*
+ * Definition of the MB93090 Boot ROM (on the CPU card)
+ */
+static struct physmap_flash_data mb93090_bootrom_data = {
+ .width = 2,
+ .nr_parts = 2,
+ .parts = mb93090_partitions,
+};
+
+static struct resource mb93090_bootrom_resource = {
+ .start = MB93090_BOOTROM_ADDR,
+ .end = MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_bootrom = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev.platform_data = &mb93090_bootrom_data,
+ .num_resources = 1,
+ .resource = &mb93090_bootrom_resource,
+};
+
+/*
+ * Definition of the MB93090 User ROM definition (on the motherboard)
+ */
+static struct physmap_flash_data mb93090_userrom_data = {
+ .width = 2,
+ .nr_parts = 2,
+ .parts = mb93090_partitions,
+};
+
+static struct resource mb93090_userrom_resource = {
+ .start = MB93090_USERROM_ADDR,
+ .end = MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_userrom = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev.platform_data = &mb93090_userrom_data,
+ .num_resources = 1,
+ .resource = &mb93090_userrom_resource,
+};
+
+/*
+ * register the MB93090 flashes
+ */
+static int __init mb93090_mtd_init(void)
+{
+ platform_device_register(&mb93090_bootrom);
+ platform_device_register(&mb93090_userrom);
+ return 0;
+}
+
+module_init(mb93090_mtd_init);
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/fs.h>
#include <linux/ipc.h>
#define VMLINUX_SYMBOL(_sym_) _##_sym_
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
/* target memory map */
#ifdef CONFIG_H8300H_GENERIC
SCHED_TEXT
LOCK_TEXT
__etext = . ;
- . = ALIGN(16); /* Exception table */
- ___start___ex_table = .;
- *(__ex_table)
- ___stop___ex_table = .;
}
+ EXCEPTION_TABLE(16)
RODATA
#if defined(CONFIG_ROMKERNEL)
__sdata = . ;
___data_start = . ;
- . = ALIGN(0x2000) ;
- *(.data.init_task)
+ INIT_TASK_DATA(0x2000)
. = ALIGN(0x4) ;
DATA_DATA
. = ALIGN(0x4) ;
__einittext = .;
INIT_DATA
. = ALIGN(0x4) ;
+ INIT_SETUP(0x4)
___setup_start = .;
*(.init.setup)
. = ALIGN(0x4) ;
___setup_end = .;
- ___initcall_start = .;
- INITCALLS
- ___initcall_end = .;
- ___con_initcall_start = .;
- *(.con_initcall.init)
- ___con_initcall_end = .;
+ INIT_CALLS
+ CON_INITCALL
EXIT_TEXT
EXIT_DATA
-#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(4);
- ___initramfs_start = .;
- *(.init.ramfs)
- ___initramfs_end = .;
-#endif
+ INIT_RAM_FS
. = ALIGN(0x4) ;
___init_end = .;
__edata = . ;
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
#else /* CONFIG_SMP */
/*
* Returns a bitmask of CPUs on Node 'node'.
*/
-#define node_to_cpumask(node) (node_to_cpu_mask[node])
#define cpumask_of_node(node) (&node_to_cpu_mask[node])
/*
#ifdef CONFIG_SMP
#define topology_physical_package_id(cpu) (cpu_data(cpu)->socket_id)
#define topology_core_id(cpu) (cpu_data(cpu)->core_id)
-#define topology_core_siblings(cpu) (cpu_core_map[cpu])
-#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
#define topology_thread_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu))
#define smt_capable() (smp_num_siblings > 1)
# User may have a custom install script
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
cmd_gate = $(CC) -nostdlib $(GATECFLAGS_$(@F)) -Wl,-T,$(filter-out FORCE,$^) -o $@
GATECFLAGS_gate.so = -shared -s -Wl,-soname=linux-gate.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
$(obj)/gate.so: $(obj)/gate.lds $(obj)/gate.o FORCE
$(call if_changed,gate)
struct thread_info thread_info;
} s;
unsigned long stack[KERNEL_STACK_SIZE/sizeof (unsigned long)];
-} init_task_mem asm ("init_task") __attribute__((section(".data.init_task"))) = {{
+} init_task_mem asm ("init_task") __init_task_data =
+ {{
.task = INIT_TASK(init_task_mem.s.task),
.thread_info = INIT_THREAD_INFO(init_task_mem.s.task)
}};
return;
}
- smp_call_function_mask(mm->cpu_vm_mask,
+ smp_call_function_many(mm_cpumask(mm),
(void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
local_irq_disable();
local_finish_flush_tlb_mm(mm);
# User may have a custom install script
-if [ -x /sbin/installkernel ]; then
- exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+ exec /sbin/${INSTALLKERNEL} "$@"
fi
if [ "$2" = "zImage" ]; then
if (prev != next) {
#ifdef CONFIG_SMP
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_set_cpu(cpu, mm_cpumask(next));
#endif /* CONFIG_SMP */
/* Set MPTB = next->pgd */
*(volatile unsigned long *)MPTB = (unsigned long)next->pgd;
}
#ifdef CONFIG_SMP
else
- if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+ if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
activate_context(next);
#endif /* CONFIG_SMP */
}
#ifndef _ASM_M32R_PAGE_H
#define _ASM_M32R_PAGE_H
+#include <linux/const.h>
+
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifndef __ASSEMBLY__
#define KSTK_EIP(tsk) ((tsk)->thread.lr)
#define KSTK_ESP(tsk) ((tsk)->thread.sp)
-#define THREAD_SIZE (2*PAGE_SIZE)
-
#define cpu_relax() barrier()
#endif /* _ASM_M32R_PROCESSOR_H */
extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#endif /* not __ASSEMBLY__ */
#define PREEMPT_ACTIVE 0x10000000
+#define THREAD_SIZE (PAGE_SIZE << 1)
+
/*
* macros/functions for gaining access to the thread information structure
*/
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
-#define THREAD_SIZE (2*PAGE_SIZE)
-
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
}
-#else /* !__ASSEMBLY__ */
-
-#define THREAD_SIZE 8192
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg
- .macro GET_THREAD_INFO reg
- ldi \reg, #-THREAD_SIZE
- and \reg, sp
- .endm
-
#endif
/*
#define resume_kernel restore_all
#endif
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg
+ .macro GET_THREAD_INFO reg
+ ldi \reg, #-THREAD_SIZE
+ and \reg, sp
+ .endm
+
ENTRY(ret_from_fork)
pop r0
bl schedule_tail
/*------------------------------------------------------------------------
* Stack area
*/
- .section .spi
+ .section .init.data, "aw"
ALIGN
.global spi_stack_top
.zero 1024
spi_stack_top:
- .section .spu
+ .section .init.data, "aw"
ALIGN
.global spu_stack_top
.zero 1024
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
void smp_local_timer_interrupt(void);
static void send_IPI_allbutself(int, int);
-static void send_IPI_mask(cpumask_t, int, int);
+static void send_IPI_mask(const struct cpumask *, int, int);
unsigned long send_IPI_mask_phys(cpumask_t, int, int);
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
void smp_send_reschedule(int cpu_id)
{
WARN_ON(cpu_is_offline(cpu_id));
- send_IPI_mask(cpumask_of_cpu(cpu_id), RESCHEDULE_IPI, 1);
+ send_IPI_mask(cpumask_of(cpu_id), RESCHEDULE_IPI, 1);
}
/*==========================================================================*
spin_lock(&flushcache_lock);
mask=cpus_addr(cpumask);
atomic_set_mask(*mask, (atomic_t *)&flushcache_cpumask);
- send_IPI_mask(cpumask, INVALIDATE_CACHE_IPI, 0);
+ send_IPI_mask(&cpumask, INVALIDATE_CACHE_IPI, 0);
_flush_cache_copyback_all();
while (flushcache_cpumask)
mb();
preempt_disable();
cpu_id = smp_processor_id();
mmc = &mm->context[cpu_id];
- cpu_mask = mm->cpu_vm_mask;
+ cpu_mask = *mm_cpumask(mm);
cpu_clear(cpu_id, cpu_mask);
if (*mmc != NO_CONTEXT) {
if (mm == current->mm)
activate_context(mm);
else
- cpu_clear(cpu_id, mm->cpu_vm_mask);
+ cpumask_clear_cpu(cpu_id, mm_cpumask(mm));
local_irq_restore(flags);
}
if (!cpus_empty(cpu_mask))
preempt_disable();
cpu_id = smp_processor_id();
mmc = &mm->context[cpu_id];
- cpu_mask = mm->cpu_vm_mask;
+ cpu_mask = *mm_cpumask(mm);
cpu_clear(cpu_id, cpu_mask);
#ifdef DEBUG_SMP
* We have to send the IPI only to
* CPUs affected.
*/
- send_IPI_mask(cpumask, INVALIDATE_TLB_IPI, 0);
+ send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
while (!cpus_empty(flush_cpumask)) {
/* nothing. lockup detection does not belong here */
if (flush_mm == current->active_mm)
activate_context(flush_mm);
else
- cpu_clear(cpu_id, flush_mm->cpu_vm_mask);
+ cpumask_clear_cpu(cpu_id, mm_cpumask(flush_mm));
} else {
unsigned long va = flush_va;
for ( ; ; );
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_IPI_mask(mask, CALL_FUNCTION_IPI, 0);
}
void arch_send_call_function_single_ipi(int cpu)
{
- send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNC_SINGLE_IPI, 0);
+ send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI, 0);
}
/*==========================================================================*
cpumask = cpu_online_map;
cpu_clear(smp_processor_id(), cpumask);
- send_IPI_mask(cpumask, ipi_num, try);
+ send_IPI_mask(&cpumask, ipi_num, try);
}
/*==========================================================================*
* ---------- --- --------------------------------------------------------
*
*==========================================================================*/
-static void send_IPI_mask(cpumask_t cpumask, int ipi_num, int try)
+static void send_IPI_mask(const struct cpumask *cpumask, int ipi_num, int try)
{
cpumask_t physid_mask, tmp;
int cpu_id, phys_id;
if (num_cpus <= 1) /* NO MP */
return;
- cpus_and(tmp, cpumask, cpu_online_map);
- BUG_ON(!cpus_equal(cpumask, tmp));
+ cpumask_and(&tmp, cpumask, cpu_online_mask);
+ BUG_ON(!cpumask_equal(cpumask, &tmp));
physid_mask = CPU_MASK_NONE;
- for_each_cpu_mask(cpu_id, cpumask){
+ for_each_cpu(cpu_id, cpumask) {
if ((phys_id = cpu_to_physid(cpu_id)) != -1)
cpu_set(phys_id, physid_mask);
}
for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++)
physid_set(phys_id, phys_cpu_present_map);
#ifndef CONFIG_HOTPLUG_CPU
- cpu_present_map = cpu_possible_map;
+ init_cpu_present(&cpu_possible_map);
#endif
show_mp_info(nr_cpu);
#include <asm-generic/vmlinux.lds.h>
#include <asm/addrspace.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
OUTPUT_ARCH(m32r)
#if defined(__LITTLE_ENDIAN__)
#endif
_etext = .; /* End of text section */
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
+ EXCEPTION_TABLE(16)
RODATA
-
- /* writeable */
- .data : { /* Data */
- *(.spu)
- *(.spi)
- DATA_DATA
- CONSTRUCTORS
- }
-
- . = ALIGN(4096);
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(4096);
- __nosave_end = .;
-
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .; /* End of data section */
- . = ALIGN(8192); /* init_task */
- .data.init_task : { *(.data.init_task) }
-
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : { INIT_DATA }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
- SECURITY_INIT
- . = ALIGN(4);
- __alt_instructions = .;
- .altinstructions : { *(.altinstructions) }
- __alt_instructions_end = .;
- .altinstr_replacement : { *(.altinstr_replacement) }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : { EXIT_TEXT }
- .exit.data : { EXIT_DATA }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4096);
- __initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
-#endif
-
- PERCPU(4096)
- . = ALIGN(4096);
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
+ PERCPU(PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
- __bss_start = .; /* BSS */
- .bss : { *(.bss) }
- . = ALIGN(4);
- __bss_stop = .;
+ BSS_SECTION(0, 0, 4)
_end = . ;
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
*/
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
-__attribute__((section(".data.init_task"), aligned(THREAD_SIZE)))
- = { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data
+ __attribute__((aligned(THREAD_SIZE))) =
+ { INIT_THREAD_INFO(init_task) };
/* initial task structure */
struct task_struct init_task = INIT_TASK(init_task);
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/ipc.h>
#include <asm/setup.h>
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/ipc.h>
#include <linux/fs.h>
config MICROBLAZE
def_bool y
select HAVE_LMB
+ select USB_ARCH_HAS_EHCI
select ARCH_WANT_OPTIONAL_GPIOLIB
config SWAP
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
-KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS :=
LDFLAGS_vmlinux :=
-LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/microblaze/kernel/head.o
libs-y += arch/microblaze/lib/
boot := arch/microblaze/boot
+# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
+DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
+
+ifneq ($(DTB),)
+ core-y += $(boot)/
+endif
+
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
MMU := -nommu
endif
-export MMU
+export MMU DTB
all: linux.bin
+BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.%
+
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
-linux.bin linux.bin.gz: vmlinux
+$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
- echo '* linux.bin - Create raw binary'
- echo ' linux.bin.gz - Create compressed raw binary'
+ echo '* linux.bin - Create raw binary'
+ echo ' linux.bin.gz - Create compressed raw binary'
+ echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
+ echo ' - stripped elf with fdt blob
+ echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
+ echo ' *_defconfig - Select default config from arch/microblaze/configs'
+ echo ''
+ echo ' Targets with <dt> embed a device tree blob inside the image'
+ echo ' These targets support board with firmware that does not'
+ echo ' support passing a device tree directly. Replace <dt> with the'
+ echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
+ echo ' (minus the .dts extension).'
endef
# arch/microblaze/boot/Makefile
#
-targets := linux.bin linux.bin.gz
+obj-y += linked_dtb.o
+
+targets := linux.bin linux.bin.gz simpleImage.%
OBJCOPYFLAGS_linux.bin := -O binary
+# Where the DTS files live
+dtstree := $(srctree)/$(src)/dts
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+ $(call if_changed,cp)
+endif
+
$(obj)/linux.bin: vmlinux FORCE
[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
$(call if_changed,gzip)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-clean-kernel += linux.bin linux.bin.gz
+quiet_cmd_cp = CP $< $@$2
+ cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+quiet_cmd_strip = STRIP $@
+ cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@
+
+$(obj)/simpleImage.%: vmlinux FORCE
+ $(call if_changed,cp,.unstrip)
+ $(call if_changed,strip)
+ @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+# Rule to build device tree blobs
+DTC = $(objtree)/scripts/dtc/dtc
+
+# Rule to build device tree blobs
+quiet_cmd_dtc = DTC $@
+ cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts
+
+$(obj)/%.dtb: $(dtstree)/%.dts FORCE
+ $(call if_changed,dtc)
+
+clean-kernel += linux.bin linux.bin.gz simpleImage.*
+
+clean-files += *.dtb
--- /dev/null
+../../platform/generic/system.dts
\ No newline at end of file
--- /dev/null
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/system.dtb"
+
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 11:00:02 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:28:50 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_KS8842 is not set
+CONFIG_XILINX_EMACLITE=y
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
# CONFIG_KMEMCHECK is not set
CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
CONFIG_DEBUG_BOOTMEM=y
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 10:35:30 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:29:43 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_PLATRAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_KS8842 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
# CONFIG_DEBUG_BOOTMEM is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
--- /dev/null
+#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H
+#define _ASM_MICROBLAZE_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+# define stringify_in_c(...) __VA_ARGS__
+# define ASM_CONST(x) x
+#else
+/* This version of stringify will deal with commas... */
+# define __stringify_in_c(...) #__VA_ARGS__
+# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " "
+# define __ASM_CONST(x) x##UL
+# define ASM_CONST(x) __ASM_CONST(x)
+#endif
+
+#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */
#define in_be32(a) __raw_readl((const void __iomem __force *)(a))
#define in_be16(a) __raw_readw(a)
+#define writel_be(v, a) out_be32((__force unsigned *)a, v)
+#define readl_be(a) in_be32((__force unsigned *)a)
+
/*
* Little endian
*/
+++ /dev/null
-#include <asm-generic/ipc.h>
#include <linux/pfn.h>
#include <asm/setup.h>
+#include <asm/asm-compat.h>
#include <linux/const.h>
#ifdef __KERNEL__
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
+#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
+
#ifndef __ASSEMBLY__
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
void time_init(void);
void init_IRQ(void);
void machine_early_init(const char *cmdline, unsigned int ram,
- unsigned int fdt);
+ unsigned int fdt, unsigned int msr);
void machine_restart(char *cmd);
void machine_shutdown(void);
--- /dev/null
+#ifndef __ASM_MICROBLAZE_SYSCALL_H
+#define __ASM_MICROBLAZE_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R12 */
+static inline long syscall_get_nr(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r12;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ /* TODO. */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r3;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ if (error)
+ regs->r3 = -error;
+ else
+ regs->r3 = val;
+}
+
+static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs,
+ unsigned int n)
+{
+ switch (n) {
+ case 5: return regs->r10;
+ case 4: return regs->r9;
+ case 3: return regs->r8;
+ case 2: return regs->r7;
+ case 1: return regs->r6;
+ case 0: return regs->r5;
+ default:
+ BUG();
+ }
+ return ~0;
+}
+
+static inline void microblaze_set_syscall_arg(struct pt_regs *regs,
+ unsigned int n,
+ unsigned long val)
+{
+ switch (n) {
+ case 5:
+ regs->r10 = val;
+ case 4:
+ regs->r9 = val;
+ case 3:
+ regs->r8 = val;
+ case 2:
+ regs->r7 = val;
+ case 1:
+ regs->r6 = val;
+ case 0:
+ regs->r5 = val;
+ default:
+ BUG();
+ }
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ while (n--)
+ *args++ = microblaze_get_syscall_arg(regs, i++);
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ while (n--)
+ microblaze_set_syscall_arg(regs, i++, *args++);
+}
+
+#endif /* __ASM_MICROBLAZE_SYSCALL_H */
{"7.10.d", 0x0b},
{"7.20.a", 0x0c},
{"7.20.b", 0x0d},
+ {"7.20.c", 0x0e},
/* FIXME There is no keycode defined in MBV for these versions */
{"2.10.a", 0x10},
{"3.00.a", 0x20},
{"spartan3a", 0xa},
{"spartan3an", 0xb},
{"spartan3adsp", 0xc},
+ {"spartan6", 0xd},
+ {"virtex6", 0xe},
/* FIXME There is no key code defined for spartan2 */
{"spartan2", 0xf0},
{NULL, 0},
swi r12, r1, PTO+PT_R0;
tovirt(r1,r1)
- la r15, r0, ret_from_trap-8
/* where the trap should return need -8 to adjust for rtsd r15, 8*/
/* Jump to the appropriate function for the system call number in r12
* (r12 is not preserved), or return an error if r12 is not valid. The LP
* register should point to the location where
* the called function should return. [note that MAKE_SYS_CALL uses label 1] */
- /* See if the system call number is valid. */
+
+ # Step into virtual mode.
+ set_vms;
+ addik r11, r0, 3f
+ rtid r11, 0
+ nop
+3:
+ add r11, r0, CURRENT_TASK /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO /* get thread info */
+ lwi r11, r11, TI_FLAGS /* get flags in thread info */
+ andi r11, r11, _TIF_WORK_SYSCALL_MASK
+ beqi r11, 4f
+
+ addik r3, r0, -ENOSYS
+ swi r3, r1, PTO + PT_R3
+ brlid r15, do_syscall_trace_enter
+ addik r5, r1, PTO + PT_R0
+
+ # do_syscall_trace_enter returns the new syscall nr.
+ addk r12, r0, r3
+ lwi r5, r1, PTO+PT_R5;
+ lwi r6, r1, PTO+PT_R6;
+ lwi r7, r1, PTO+PT_R7;
+ lwi r8, r1, PTO+PT_R8;
+ lwi r9, r1, PTO+PT_R9;
+ lwi r10, r1, PTO+PT_R10;
+4:
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid.
+ * The LP register should point to the location where the called function
+ * should return. [note that MAKE_SYS_CALL uses label 1] */
+ /* See if the system call number is valid */
addi r11, r12, -__NR_syscalls;
- bgei r11,1f;
+ bgei r11,5f;
/* Figure out which function to use for this system call. */
/* Note Microblaze barrel shift is optional, so don't rely on it */
add r12, r12, r12; /* convert num -> ptr */
add r12, r12, r12;
/* Trac syscalls and stored them to r0_ram */
- lwi r3, r12, 0x400 + TOPHYS(r0_ram)
+ lwi r3, r12, 0x400 + r0_ram
addi r3, r3, 1
- swi r3, r12, 0x400 + TOPHYS(r0_ram)
+ swi r3, r12, 0x400 + r0_ram
+
+ # Find and jump into the syscall handler.
+ lwi r12, r12, sys_call_table
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ la r15, r0, ret_from_trap-8
+ bra r12
- lwi r12, r12, TOPHYS(sys_call_table); /* Function ptr */
- /* Make the system call. to r12*/
- set_vms;
- rtid r12, 0;
- nop;
/* The syscall number is invalid, return an error. */
-1: VM_ON; /* RETURN() expects virtual mode*/
+5:
addi r3, r0, -ENOSYS;
rtsd r15,8; /* looks like a normal subroutine return */
or r0, r0, r0
-/* Entry point used to return from a syscall/trap. */
+/* Entry point used to return from a syscall/trap */
/* We re-enable BIP bit before state restore */
C_ENTRY(ret_from_trap):
set_bip; /* Ints masked for state restore*/
/* See if returning to kernel mode, if so, skip resched &c. */
bnei r11, 2f;
+ /* We're returning to user mode, so check for various conditions that
+ * trigger rescheduling. */
+ # FIXME: Restructure all these flag checks.
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_WORK_SYSCALL_MASK
+ beqi r11, 1f
+
+ swi r3, r1, PTO + PT_R3
+ swi r4, r1, PTO + PT_R4
+ brlid r15, do_syscall_trace_leave
+ addik r5, r1, PTO + PT_R0
+ lwi r3, r1, PTO + PT_R3
+ lwi r4, r1, PTO + PT_R4
+1:
+
/* We're returning to user mode, so check for various conditions that
* trigger rescheduling. */
/* Get current task ptr into r11 */
#endif
#if 0
- printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+ printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \
+ "ESR=%08x\n",
type, user_mode(regs) ? "user" : "kernel", fsr,
(unsigned int) regs->pc, (unsigned int) regs->esr);
#endif
switch (type & 0x1F) {
case MICROBLAZE_ILL_OPCODE_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
+ pr_debug(KERN_WARNING "Illegal opcode exception " \
+ "in user mode.\n");
_exception(SIGILL, regs, ILL_ILLOPC, addr);
return;
}
- printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+ printk(KERN_WARNING "Illegal opcode exception " \
+ "in kernel mode.\n");
die("opcode exception", regs, SIGBUS);
break;
case MICROBLAZE_IBUS_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Instruction bus error exception in user mode.\n");
+ pr_debug(KERN_WARNING "Instruction bus error " \
+ "exception in user mode.\n");
_exception(SIGBUS, regs, BUS_ADRERR, addr);
return;
}
- printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n");
+ printk(KERN_WARNING "Instruction bus error exception " \
+ "in kernel mode.\n");
die("bus exception", regs, SIGBUS);
break;
case MICROBLAZE_DBUS_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Data bus error exception in user mode.\n");
+ pr_debug(KERN_WARNING "Data bus error exception " \
+ "in user mode.\n");
_exception(SIGBUS, regs, BUS_ADRERR, addr);
return;
}
- printk(KERN_WARNING "Data bus error exception in kernel mode.\n");
+ printk(KERN_WARNING "Data bus error exception " \
+ "in kernel mode.\n");
die("bus exception", regs, SIGBUS);
break;
case MICROBLAZE_DIV_ZERO_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Divide by zero exception in user mode\n");
- _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ pr_debug(KERN_WARNING "Divide by zero exception " \
+ "in user mode\n");
+ _exception(SIGILL, regs, FPE_INTDIV, addr);
return;
}
- printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+ printk(KERN_WARNING "Divide by zero exception " \
+ "in kernel mode.\n");
die("Divide by exception", regs, SIGBUS);
break;
case MICROBLAZE_FPU_EXCEPTION:
- printk(KERN_WARNING "FPU exception\n");
+ pr_debug(KERN_WARNING "FPU exception\n");
/* IEEE FP exception */
/* I removed fsr variable and use code var for storing fsr */
if (fsr & FSR_IO)
#ifdef CONFIG_MMU
case MICROBLAZE_PRIVILEGED_EXCEPTION:
- printk(KERN_WARNING "Privileged exception\n");
+ pr_debug(KERN_WARNING "Privileged exception\n");
/* "brk r0,r0" - used as debug breakpoint */
if (get_user(code, (unsigned long *)regs->pc) == 0
&& code == 0x980c0000) {
mfs r1, rmsr
andi r1, r1, ~2
mts rmsr, r1
+/*
+ * Here is checking mechanism which check if Microblaze has msr instructions
+ * We load msr and compare it with previous r1 value - if is the same,
+ * msr instructions works if not - cpu don't have them.
+ */
+ /* r8=0 - I have msr instr, 1 - I don't have them */
+ rsubi r0, r0, 1 /* set the carry bit */
+ msrclr r0, 0x4 /* try to clear it */
+ /* read the carry bit, r8 will be '0' if msrclr exists */
+ addik r8, r0, 0
/* r7 may point to an FDT, or there may be one linked in.
if it's in r7, we've got to save it away ASAP.
* Please see $(ARCH)/mach-$(SUBARCH)/setup.c for
* the function.
*/
- la r8, r0, machine_early_init
- brald r15, r8
+ la r9, r0, machine_early_init
+ brald r15, r9
nop
#ifndef CONFIG_MMU
#define NUM_TO_REG(num) r ## num
#ifdef CONFIG_MMU
-/* FIXME you can't change first load of MSR because there is
- * hardcoded jump bri 4 */
#define RESTORE_STATE \
+ lwi r5, r1, 0; \
+ mts rmsr, r5; \
+ nop; \
lwi r3, r1, PT_R3; \
lwi r4, r1, PT_R4; \
lwi r5, r1, PT_R5; \
lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
#endif
+ mfs r5, rmsr;
+ nop
+ swi r5, r1, 0;
mfs r3, resr
nop
mfs r4, rear;
addk r8, r17, r0; /* Load exception address */
bralid r15, full_exception; /* Branch to the handler */
nop;
+ mts r0, rfsr; /* Clear sticky fsr */
+ nop
/*
* Trigger execution of the signal handler by enabling
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
-{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
struct task_struct init_task = INIT_TASK(init_task);
EXPORT_SYMBOL(init_task);
regs->pc = pc;
regs->r1 = usp;
regs->pt_mode = 0;
+ regs->msr |= MSR_UMS;
}
#ifdef CONFIG_MMU
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
+#include <linux/elf.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
#include <linux/errno.h>
#include <asm/processor.h>
return rval;
}
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ long ret = 0;
+
+ secure_computing(regs->r12);
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ tracehook_report_syscall_entry(regs))
+ /*
+ * Tracing decided this syscall should not happen.
+ * We'll return a bogus call number to get an ENOSYS
+ * error, but leave the original number in regs->regs[0].
+ */
+ ret = -1L;
+
+ if (unlikely(current->audit_context))
+ audit_syscall_entry(EM_XILINX_MICROBLAZE, regs->r12,
+ regs->r5, regs->r6,
+ regs->r7, regs->r8);
+
+ return ret ?: regs->r12;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+ int step;
+
+ if (unlikely(current->audit_context))
+ audit_syscall_exit(AUDITSC_RESULT(regs->r3), regs->r3);
+
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, step);
+}
+
+#if 0
+static asmlinkage void syscall_trace(void)
+{
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+ /* The 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
+#endif
+
void ptrace_disable(struct task_struct *child)
{
/* nothing to do */
#endif /* CONFIG_MTD_UCLINUX_EBSS */
void __init machine_early_init(const char *cmdline, unsigned int ram,
- unsigned int fdt)
+ unsigned int fdt, unsigned int msr)
{
unsigned long *src, *dst = (unsigned long *)0x0;
early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
#endif
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ if (msr)
+ early_printk("!!!Your kernel has setup MSR instruction but "
+ "CPU don't have it %d\n", msr);
+#else
+ if (!msr)
+ early_printk("!!!Your kernel not setup MSR instruction but "
+ "CPU have it %d\n", msr);
+#endif
+
for (src = __ivt_start; src < __ivt_end; src++, dst++)
*dst = *src;
#include <linux/mman.h>
#include <linux/sys.h>
#include <linux/ipc.h>
-#include <linux/utsname.h>
#include <linux/file.h>
#include <linux/module.h>
#include <linux/err.h>
OUTPUT_ARCH(microblaze)
ENTRY(_start)
+#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
jiffies = jiffies_64 + 4;
SECTIONS {
. = CONFIG_KERNEL_START;
- .text : {
+ _start = CONFIG_KERNEL_BASE_ADDR;
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
_text = . ;
_stext = . ;
*(.text .text.*)
}
. = ALIGN (4) ;
- _fdt_start = . ; /* place for fdt blob */
- . = . + 0x4000;
- _fdt_end = . ;
+ __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) {
+ _fdt_start = . ; /* place for fdt blob */
+ *(__fdt_blob) ; /* Any link-placed DTB */
+ . = _fdt_start + 0x4000; /* Pad up to 16kbyte */
+ _fdt_end = . ;
+ }
. = ALIGN(16);
RODATA
- . = ALIGN(16);
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
/*
* sdata2 section can go anywhere, but must be word aligned
* and SDA2_BASE must point to the middle of it
*/
- .sdata2 : {
+ .sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) {
_ssrw = .;
. = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */
*(.sdata2)
}
_sdata = . ;
- .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
- DATA_DATA
- CONSTRUCTORS
- }
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = . ;
/* Reserve some low RAM for r0 based memory references */
r0_ram = . ;
. = . + 4096; /* a page should be enough */
- /* The initial task */
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
-
/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
. = ALIGN(8);
- .sdata : {
+ .sdata : AT(ADDR(.sdata) - LOAD_OFFSET) {
_ssro = .;
*(.sdata)
}
- .sbss : {
+ .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {
_ssbss = .;
*(.sbss)
_esbss = .;
__init_begin = .;
- . = ALIGN(4096);
- .init.text : {
- _sinittext = . ;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
- .init.data : {
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
}
. = ALIGN(4);
- .init.ivt : {
+ .init.ivt : AT(ADDR(.init.ivt) - LOAD_OFFSET) {
__ivt_start = .;
*(.init.ivt)
__ivt_end = .;
}
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ INIT_SETUP(0)
}
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET ) {
+ INIT_CALLS
}
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ CON_INITCALL
}
SECURITY_INIT
__init_end_before_initramfs = .;
- .init.ramfs ALIGN(4096) : {
+ .init.ramfs ALIGN(4096) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
__init_end = .;
- .bss ALIGN (4096) : { /* page aligned when MMU used */
+ .bss ALIGN (4096) : AT(ADDR(.bss) - LOAD_OFFSET) {
+ /* page aligned when MMU used */
__bss_start = . ;
*(.bss*)
*(COMMON)
totalram_pages++;
pages++;
}
- printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+ printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n",
+ (int)(pages * (PAGE_SIZE / 1024)));
}
#endif
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
-ifdef CONFIG_32BIT
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-JIFFIES = jiffies_64
-else
-JIFFIES = jiffies_64 + 4
-endif
-else
-JIFFIES = jiffies_64
-endif
-
#
# Automatically detect the build format. By default we choose
# the elf format according to the load address.
endif
KBUILD_AFLAGS += $(cflags-y)
-KBUILD_CFLAGS += $(cflags-y) \
- -D"VMLINUX_LOAD_ADDRESS=$(load-y)"
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CPPFLAGS += -D"VMLINUX_LOAD_ADDRESS=$(load-y)"
+KBUILD_CPPFLAGS += -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
LDFLAGS += -m $(ld-emul)
OBJCOPYFLAGS += --remove-section=.reginfo
-#
-# Choosing incompatible machines durings configuration will result in
-# error messages during linking. Select a default linkscript if
-# none has been choosen above.
-#
-
-CPPFLAGS_vmlinux.lds := \
- $(KBUILD_CFLAGS) \
- -D"LOADADDR=$(load-y)" \
- -D"JIFFIES=$(JIFFIES)" \
- -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
-
head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
libs-y += arch/mips/lib/
.irq = AU1000_RTC_MATCH2_INT,
.set_next_event = au1x_rtcmatch2_set_next_event,
.set_mode = au1x_rtcmatch2_set_mode,
- .cpumask = CPU_MASK_ALL_PTR,
+ .cpumask = cpu_all_mask,
};
static struct irqaction au1x_rtcmatch2_irqaction = {
#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid)
#define parent_node(node) (node)
-#define node_to_cpumask(node) (hub_data(node)->h_cpus)
#define cpumask_of_node(node) (&hub_data(node)->h_cpus)
struct pci_bus;
extern int pcibus_to_node(struct pci_bus *);
-#define pcibus_to_cpumask(bus) (cpu_online_map)
#define cpumask_of_pcibus(bus) (cpu_online_mask)
extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
* Mark current->active_mm as not "active" anymore.
* We don't want to mislead possible IPI tlb flush routines.
*/
- cpu_clear(cpu, prev->cpu_vm_mask);
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+ cpumask_set_cpu(cpu, mm_cpumask(next));
local_irq_restore(flags);
}
TLBMISS_HANDLER_SETUP_PGD(next->pgd);
/* mark mmu ownership change */
- cpu_clear(cpu, prev->cpu_vm_mask);
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+ cpumask_set_cpu(cpu, mm_cpumask(next));
local_irq_restore(flags);
}
local_irq_save(flags);
- if (cpu_isset(cpu, mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(cpu, mm_cpumask(mm))) {
get_new_mmu_context(mm, cpu);
#ifdef CONFIG_MIPS_MT_SMTC
/* See comments for similar code above */
struct plat_smp_ops {
void (*send_ipi_single)(int cpu, unsigned int action);
- void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+ void (*send_ipi_mask)(const struct cpumask *mask, unsigned int action);
void (*init_secondary)(void);
void (*smp_finish)(void);
void (*cpus_done)(void);
extern asmlinkage void smp_call_function_interrupt(void);
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#endif /* __ASM_SMP_H */
*
* The things we do for performance..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"),
- __aligned__(THREAD_SIZE))) =
+union thread_union init_thread_union __init_task_data
+ __attribute__((__aligned__(THREAD_SIZE))) =
{ INIT_THREAD_INFO(init_task) };
/*
local_irq_restore(flags);
}
-static void cmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void cmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
cmp_send_ipi_single(i, action);
}
for (i = 1; i < NR_CPUS; i++) {
if (amon_cpu_avail(i)) {
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
__cpu_number_map[i] = ++ncpu;
__cpu_logical_map[ncpu] = i;
}
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
- cpu_set(tc, cpu_possible_map);
+ set_cpu_possible(tc, true);
__cpu_number_map[tc] = ++ncpu;
__cpu_logical_map[ncpu] = tc;
}
local_irq_restore(flags);
}
-static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
vsmp_send_ipi_single(i, action);
}
panic(KERN_ERR "%s called", __func__);
}
-static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void up_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
panic(KERN_ERR "%s called", __func__);
}
cpu_idle();
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
}
mp_ops->prepare_cpus(max_cpus);
set_cpu_sibling_map(0);
#ifndef CONFIG_HOTPLUG_CPU
- cpu_present_map = cpu_possible_map;
+ init_cpu_present(&cpu_possible_map);
#endif
}
/* preload SMP state for boot cpu */
void __devinit smp_prepare_boot_cpu(void)
{
- cpu_set(0, cpu_possible_map);
- cpu_set(0, cpu_online_map);
+ set_cpu_possible(0, true);
+ set_cpu_online(0, true);
cpu_set(0, cpu_callin_map);
}
*/
ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
__cpu_number_map[i] = i;
__cpu_logical_map[i] = i;
}
* Pull any physically present but unused TCs out of circulation.
*/
while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
- cpu_clear(tc, cpu_possible_map);
- cpu_clear(tc, cpu_present_map);
+ set_cpu_possible(tc, false);
+ set_cpu_present(tc, false);
tc++;
}
text PT_LOAD FLAGS(7); /* RWX */
note PT_NOTE FLAGS(4); /* R__ */
}
-jiffies = JIFFIES;
+
+ifdef CONFIG_32BIT
+ ifdef CONFIG_CPU_LITTLE_ENDIAN
+ jiffies = jiffies_64;
+ else
+ jiffies = jiffies_64 + 4;
+ endif
+else
+ jiffies = jiffies_64;
+endif
SECTIONS
{
/* . = 0xa800000000300000; */
. = 0xffffffff80300000;
#endif
- . = LOADADDR;
+ . = VMLINUX_LOAD_ADDRESS;
/* read-only */
_text = .; /* Text and read-only data */
.text : {
/* And the same for proc */
-int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
+int proc_dolasatstring(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- r = proc_dostring(table, write, filp, buffer, lenp, ppos);
+ r = proc_dostring(table, write, buffer, lenp, ppos);
if ((!write) || r)
return r;
}
/* proc function to write EEPROM after changing int entry */
-int proc_dolasatint(ctl_table *table, int write, struct file *filp,
+int proc_dolasatint(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ r = proc_dointvec(table, write, buffer, lenp, ppos);
if ((!write) || r)
return r;
static int rtctmp;
/* proc function to read/write RealTime Clock */
-int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
+int proc_dolasatrtc(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct timespec ts;
if (rtctmp < 0)
rtctmp = 0;
}
- r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ r = proc_dointvec(table, write, buffer, lenp, ppos);
if (r)
return r;
#endif
#ifdef CONFIG_INET
-int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
+int proc_lasat_ip(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int ip;
return 0;
}
-int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ r = proc_dointvec(table, write, buffer, lenp, ppos);
if (r < 0)
return r;
if (write) {
/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
}
-static inline void ssmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void ssmtc_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
ssmtc_send_ipi_single(i, action);
}
* cores it has been used on
*/
if (vma)
- mask = vma->vm_mm->cpu_vm_mask;
+ mask = *mm_cpumask(vma->vm_mm);
else
mask = cpu_online_map;
cpu_clear(cpu, mask);
smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
}
-static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void msmtc_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
msmtc_send_ipi_single(i, action);
}
}
}
-static void yos_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
yos_send_ipi_single(i, action);
}
/*
* A node with nothing. We use it to avoid any special casing in
- * node_to_cpumask
+ * cpumask_of_node
*/
static struct node_data null_node = {
.hub = {
REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
}
-static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void ip27_send_ipi(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
ip27_send_ipi_single(i, action);
}
__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
}
-static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void bcm1480_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
bcm1480_send_ipi_single(i, action);
}
__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
}
-static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void sb1250_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
sb1250_send_ipi_single(i, action);
}
#define enter_lazy_tlb(mm, tsk) do {} while (0)
#ifdef CONFIG_SMP
-#define cpu_ran_vm(cpu, task) \
- cpu_set((cpu), (task)->cpu_vm_mask)
-#define cpu_maybe_ran_vm(cpu, task) \
- cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#define cpu_ran_vm(cpu, mm) \
+ cpumask_set_cpu((cpu), mm_cpumask(mm))
+#define cpu_maybe_ran_vm(cpu, mm) \
+ cpumask_test_and_set_cpu((cpu), mm_cpumask(mm))
#else
-#define cpu_ran_vm(cpu, task) do {} while (0)
-#define cpu_maybe_ran_vm(cpu, task) true
+#define cpu_ran_vm(cpu, mm) do {} while (0)
+#define cpu_maybe_ran_vm(cpu, mm) true
#endif /* CONFIG_SMP */
/*
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/tty.h>
#include <asm/uaccess.h>
RO_DATA(PAGE_SIZE)
/* writeable */
- .data : { /* Data */
- DATA_DATA
- CONSTRUCTORS
- }
-
- .data_nosave : { NOSAVE_DATA; }
-
- .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
- .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
-
- /* rarely changed data like cpu maps */
- . = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly)) {
- READ_MOSTLY_DATA(32);
- _edata = .; /* End of data section */
- }
-
- .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
/* might get freed after init */
. = ALIGN(PAGE_SIZE);
/* will be freed after init */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT;
- _einittext = .;
- }
- .init.data : { INIT_DATA; }
- .setup.init : { INIT_SETUP(16); }
-
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- .con_initcall.init : { CON_INITCALL; }
-
- SECURITY_INIT
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
. = ALIGN(4);
__alt_instructions = .;
.altinstructions : { *(.altinstructions) }
.exit.text : { EXIT_TEXT; }
.exit.data : { EXIT_DATA; }
- .init.ramfs : { INIT_RAM_FS; }
-
PERCPU(32)
. = ALIGN(PAGE_SIZE);
__init_end = .;
@echo '* vmlinux - Uncompressed kernel image (./vmlinux)'
@echo ' palo - Bootable image (./lifimage)'
@echo ' install - Install kernel using'
- @echo ' (your) ~/bin/installkernel or'
- @echo ' (distribution) /sbin/installkernel or'
+ @echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ @echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
@echo ' copy to $$(INSTALL_PATH)'
endef
#define F_SETOWN 12 /* for sockets. */
#define F_SETSIG 13 /* for sockets. */
#define F_GETSIG 14 /* for sockets. */
+#define F_GETOWN_EX 15
+#define F_SETOWN_EX 16
/* for posix fcntl() and lockf() */
#define F_RDLCK 01
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
#endif /* !ASSEMBLY */
# User may have a custom install script
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
+union thread_union init_thread_union __init_task_data
+ __attribute__((aligned(128))) =
{ INIT_THREAD_INFO(init_task) };
#if PT_NLEVELS == 3
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/time.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
*/
. = ALIGN(PAGE_SIZE);
data_start = .;
- . = ALIGN(16);
- /* Exception table */
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
NOTES
__stop___unwind = .;
}
- /* rarely changed data like cpu maps */
- . = ALIGN(16);
- .data.read_mostly : {
- *(.data.read_mostly)
- }
-
- . = ALIGN(L1_CACHE_BYTES);
/* Data */
- .data : {
- DATA_DATA
- CONSTRUCTORS
- }
-
- . = ALIGN(L1_CACHE_BYTES);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
/* PA-RISC locks requires 16-byte alignment */
. = ALIGN(16);
*(.data.lock_aligned)
}
- /* nosave data is really only used for software suspend...it's here
- * just in case we ever implement it
- */
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- .data_nosave : {
- *(.data.nosave)
- }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
/* End of data section */
_edata = .;
}
__bss_stop = .;
-
- /* assembler code expects init_task to be 16k aligned */
- . = ALIGN(16384);
- /* init_task */
- .data.init_task : {
- *(.data.init_task)
- }
-
#ifdef CONFIG_64BIT
. = ALIGN(16);
/* Linkage tables */
/* reserve space for interrupt stack by aligning __init* to 16k */
. = ALIGN(16384);
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : {
- INIT_DATA
- }
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- SECURITY_INIT
-
- /* alternate instruction replacement. This is a mechanism x86 uses
- * to detect the CPU type and replace generic instruction sequences
- * with CPU specific ones. We don't currently do this in PA, but
- * it seems like a good idea...
- */
- . = ALIGN(4);
- .altinstructions : {
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : {
- *(.altinstr_replacement)
- }
-
- /* .exit.text is discard at runtime, not link time, to deal with references
- * from .altinstructions and .eh_frame
- */
- .exit.text : {
- EXIT_TEXT
- }
- .exit.data : {
- EXIT_DATA
- }
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
+ INIT_TEXT_SECTION(16384)
+ INIT_DATA_SECTION(16)
PERCPU(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
config NODES_SHIFT
int
+ default "8" if PPC64
default "4"
depends on NEED_MULTIPLE_NODES
+config MAX_ACTIVE_REGIONS
+ int
+ default "256" if PPC64
+ default "32"
+
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on PPC64
# Default to zImage, override when needed
all: zImage
-CPPFLAGS_vmlinux.lds := -Upowerpc
-
BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
PHONY += $(BOOT_TARGETS)
boot := arch/$(ARCH)/boot
+ifeq ($(CONFIG_RELOCATABLE),y)
+quiet_cmd_relocs_check = CALL $<
+ cmd_relocs_check = perl $< "$(OBJDUMP)" "$(obj)/vmlinux"
+
+PHONY += relocs_check
+relocs_check: arch/powerpc/relocs_check.pl vmlinux
+ $(call cmd,relocs_check)
+
+zImage: relocs_check
+endif
+
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
@echo ' simpleImage.<dt> - Firmware independent image.'
@echo ' treeImage.<dt> - Support for older IBM 4xx firmware (not U-Boot)'
@echo ' install - Install kernel using'
- @echo ' (your) ~/bin/installkernel or'
- @echo ' (distribution) /sbin/installkernel or'
+ @echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ @echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
@echo ' install to $$(INSTALL_PATH) and run lilo'
@echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
@echo ''
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install
/* DMA operations on that device */
struct dma_map_ops *dma_ops;
- void *dma_data;
+
+ /*
+ * When an iommu is in use, dma_data is used as a ptr to the base of the
+ * iommu_table. Otherwise, it is a simple numerical offset.
+ */
+ union {
+ dma_addr_t dma_offset;
+ void *iommu_table_base;
+ } dma_data;
+
#ifdef CONFIG_SWIOTLB
dma_addr_t max_direct_dma_addr;
#endif
extern void dma_direct_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
-extern unsigned long get_dma_direct_offset(struct device *dev);
#ifdef CONFIG_NOT_COHERENT_CACHE
/*
dev->archdata.dma_ops = ops;
}
+/*
+ * get_dma_offset()
+ *
+ * Get the dma offset on configurations where the dma address can be determined
+ * from the physical address by looking at a simple offset. Direct dma and
+ * swiotlb use this function, but it is typically not used by implementations
+ * with an iommu.
+ */
+static inline dma_addr_t get_dma_offset(struct device *dev)
+{
+ if (dev)
+ return dev->archdata.dma_data.dma_offset;
+
+ return PCI_DRAM_OFFSET;
+}
+
+static inline void set_dma_offset(struct device *dev, dma_addr_t off)
+{
+ if (dev)
+ dev->archdata.dma_data.dma_offset = off;
+}
+
/* this will be removed soon */
#define flush_write_buffers()
static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
- return paddr + get_dma_direct_offset(dev);
+ return paddr + get_dma_offset(dev);
}
static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
- return daddr - get_dma_direct_offset(dev);
+ return daddr - get_dma_offset(dev);
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
--- /dev/null
+/*
+ * Freescale MPC83XX / MPC85XX DMA Controller
+ *
+ * Copyright (c) 2009 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ARCH_POWERPC_ASM_FSLDMA_H__
+#define __ARCH_POWERPC_ASM_FSLDMA_H__
+
+#include <linux/dmaengine.h>
+
+/*
+ * Definitions for the Freescale DMA controller's DMA_SLAVE implemention
+ *
+ * The Freescale DMA_SLAVE implementation was designed to handle many-to-many
+ * transfers. An example usage would be an accelerated copy between two
+ * scatterlists. Another example use would be an accelerated copy from
+ * multiple non-contiguous device buffers into a single scatterlist.
+ *
+ * A DMA_SLAVE transaction is defined by a struct fsl_dma_slave. This
+ * structure contains a list of hardware addresses that should be copied
+ * to/from the scatterlist passed into device_prep_slave_sg(). The structure
+ * also has some fields to enable hardware-specific features.
+ */
+
+/**
+ * struct fsl_dma_hw_addr
+ * @entry: linked list entry
+ * @address: the hardware address
+ * @length: length to transfer
+ *
+ * Holds a single physical hardware address / length pair for use
+ * with the DMAEngine DMA_SLAVE API.
+ */
+struct fsl_dma_hw_addr {
+ struct list_head entry;
+
+ dma_addr_t address;
+ size_t length;
+};
+
+/**
+ * struct fsl_dma_slave
+ * @addresses: a linked list of struct fsl_dma_hw_addr structures
+ * @request_count: value for DMA request count
+ * @src_loop_size: setup and enable constant source-address DMA transfers
+ * @dst_loop_size: setup and enable constant destination address DMA transfers
+ * @external_start: enable externally started DMA transfers
+ * @external_pause: enable externally paused DMA transfers
+ *
+ * Holds a list of address / length pairs for use with the DMAEngine
+ * DMA_SLAVE API implementation for the Freescale DMA controller.
+ */
+struct fsl_dma_slave {
+
+ /* List of hardware address/length pairs */
+ struct list_head addresses;
+
+ /* Support for extra controller features */
+ unsigned int request_count;
+ unsigned int src_loop_size;
+ unsigned int dst_loop_size;
+ bool external_start;
+ bool external_pause;
+};
+
+/**
+ * fsl_dma_slave_append - add an address/length pair to a struct fsl_dma_slave
+ * @slave: the &struct fsl_dma_slave to add to
+ * @address: the hardware address to add
+ * @length: the length of bytes to transfer from @address
+ *
+ * Add a hardware address/length pair to a struct fsl_dma_slave. Returns 0 on
+ * success, -ERRNO otherwise.
+ */
+static inline int fsl_dma_slave_append(struct fsl_dma_slave *slave,
+ dma_addr_t address, size_t length)
+{
+ struct fsl_dma_hw_addr *addr;
+
+ addr = kzalloc(sizeof(*addr), GFP_ATOMIC);
+ if (!addr)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&addr->entry);
+ addr->address = address;
+ addr->length = length;
+
+ list_add_tail(&addr->entry, &slave->addresses);
+ return 0;
+}
+
+/**
+ * fsl_dma_slave_free - free a struct fsl_dma_slave
+ * @slave: the struct fsl_dma_slave to free
+ *
+ * Free a struct fsl_dma_slave and all associated address/length pairs
+ */
+static inline void fsl_dma_slave_free(struct fsl_dma_slave *slave)
+{
+ struct fsl_dma_hw_addr *addr, *tmp;
+
+ if (slave) {
+ list_for_each_entry_safe(addr, tmp, &slave->addresses, entry) {
+ list_del(&addr->entry);
+ kfree(addr);
+ }
+
+ kfree(slave);
+ }
+}
+
+/**
+ * fsl_dma_slave_alloc - allocate a struct fsl_dma_slave
+ * @gfp: the flags to pass to kmalloc when allocating this structure
+ *
+ * Allocate a struct fsl_dma_slave for use by the DMA_SLAVE API. Returns a new
+ * struct fsl_dma_slave on success, or NULL on failure.
+ */
+static inline struct fsl_dma_slave *fsl_dma_slave_alloc(gfp_t gfp)
+{
+ struct fsl_dma_slave *slave;
+
+ slave = kzalloc(sizeof(*slave), gfp);
+ if (!slave)
+ return NULL;
+
+ INIT_LIST_HEAD(&slave->addresses);
+ return slave;
+}
+
+#endif /* __ARCH_POWERPC_ASM_FSLDMA_H__ */
struct scatterlist;
+static inline void set_iommu_table_base(struct device *dev, void *base)
+{
+ dev->archdata.dma_data.iommu_table_base = base;
+}
+
+static inline void *get_iommu_table_base(struct device *dev)
+{
+ return dev->archdata.dma_data.iommu_table_base;
+}
+
/* Frees table for an individual device node */
extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
void release_pmc_hardware(void);
void ppc_enable_pmcs(void);
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/lppaca.h>
static inline void ppc_set_pmu_inuse(int inuse)
#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_SPECIAL 0x020 /* software: Special page */
#define _PAGE_RW 0x040 /* software: Writes permitted */
#define _PAGE_DIRTY 0x080 /* software: dirty page */
#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
+#define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */
/* These five software bits must be masked out when the entry is loaded
* into the TLB.
#ifndef _PAGE_WRITETHRU
#define _PAGE_WRITETHRU 0
#endif
-#ifndef _PAGE_SPECIAL
-#define _PAGE_SPECIAL 0
-#endif
#ifndef _PAGE_4K_PFN
#define _PAGE_4K_PFN 0
#endif
#define HAVE_PAGE_AGP
/* Advertise support for _PAGE_SPECIAL */
-#ifdef _PAGE_SPECIAL
#define __HAVE_ARCH_PTE_SPECIAL
-#endif
extern struct smp_ops_t *smp_ops;
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
/* Definitions relative to the secondary CPU spin loop
* and entry point. Not all of them exist on both 32 and
#define parent_node(node) (node)
-static inline cpumask_t node_to_cpumask(int node)
-{
- return numa_cpumask_lookup_table[node];
-}
-
#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
int of_node_to_nid(struct device_node *device);
}
#endif
-#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \
- CPU_MASK_ALL : \
- node_to_cpumask(pcibus_to_node(bus)) \
- )
-
#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
cpu_all_mask : \
cpumask_of_node(pcibus_to_node(bus)))
#ifdef CONFIG_PPC64
#include <asm/smp.h>
-#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
-#define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_thread_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (&per_cpu(cpu_core_map, cpu))
#define topology_core_id(cpu) (cpu_to_core_id(cpu))
static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
- return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
+ return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
dma_handle, device_to_mask(dev), flag,
dev_to_node(dev));
}
static void dma_iommu_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
- iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
+ iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
}
/* Creates TCEs for a user provided buffer. The user buffer must be
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- return iommu_map_page(dev, dev->archdata.dma_data, page, offset, size,
- device_to_mask(dev), direction, attrs);
+ return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
+ size, device_to_mask(dev), direction, attrs);
}
size_t size, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- iommu_unmap_page(dev->archdata.dma_data, dma_handle, size, direction,
+ iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
attrs);
}
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+ return iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
device_to_mask(dev), direction, attrs);
}
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+ iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems, direction,
attrs);
}
/* We support DMA to/from any memory page via the iommu */
static int dma_iommu_dma_supported(struct device *dev, u64 mask)
{
- struct iommu_table *tbl = dev->archdata.dma_data;
+ struct iommu_table *tbl = get_iommu_table_base(dev);
if (!tbl || tbl->it_offset > mask) {
printk(KERN_INFO
* default the offset is PCI_DRAM_OFFSET.
*/
-unsigned long get_dma_direct_offset(struct device *dev)
-{
- if (dev)
- return (unsigned long)dev->archdata.dma_data;
-
- return PCI_DRAM_OFFSET;
-}
void *dma_direct_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
if (ret == NULL)
return NULL;
- *dma_handle += get_dma_direct_offset(dev);
+ *dma_handle += get_dma_offset(dev);
return ret;
#else
struct page *page;
return NULL;
ret = page_address(page);
memset(ret, 0, size);
- *dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
+ *dma_handle = virt_to_abs(ret) + get_dma_offset(dev);
return ret;
#endif
int i;
for_each_sg(sgl, sg, nents, i) {
- sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+ sg->dma_address = sg_phys(sg) + get_dma_offset(dev);
sg->dma_length = sg->length;
__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
}
{
BUG_ON(dir == DMA_NONE);
__dma_sync_page(page, offset, size, dir);
- return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+ return page_to_phys(page) + offset + get_dma_offset(dev);
}
static inline void dma_direct_unmap_page(struct device *dev,
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/thread_info.h>
-#include <asm/reg.h>
#include <asm/exception-64e.h>
#include <asm/bug.h>
#include <asm/irqflags.h>
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#include <linux/kexec.h>
#include <linux/smp.h>
#include <linux/thread_info.h>
+#include <linux/init_task.h>
#include <linux/errno.h>
#include <asm/page.h>
* We could use a smaller stack if we don't care about anything using
* current, but that audit has not been performed.
*/
-static union thread_union kexec_stack
- __attribute__((__section__(".data.init_task"))) = { };
+static union thread_union kexec_stack __init_task_data =
+ { };
/* Our assembly helper, in kexec_stub.S */
extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
/* Hook up default DMA ops */
sd->dma_ops = pci_dma_ops;
- sd->dma_data = (void *)PCI_DRAM_OFFSET;
+ set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
/* Additional platform DMA/iommu setup */
if (ppc_md.pci_dma_dev_setup)
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
- unsigned long ret = PAGE_ALIGN(mm->brk + brk_rnd());
+ unsigned long base = mm->brk;
+ unsigned long ret;
+
+#ifdef CONFIG_PPC64
+ /*
+ * If we are using 1TB segments and we are allowed to randomise
+ * the heap, we can put it above 1TB so it is backed by a 1TB
+ * segment. Otherwise the heap will be in the bottom 1TB
+ * which always uses 256MB segments and this may result in a
+ * performance penalty.
+ */
+ if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T))
+ base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T);
+#endif
+
+ ret = PAGE_ALIGN(base + brk_rnd());
if (ret < mm->brk)
return mm->brk;
root = call_prom("open", 1, 1, ADDR("/"));
if (root != 0) {
/* try calling the ibm,client-architecture-support method */
- prom_printf("Calling ibm,client-architecture...");
+ prom_printf("Calling ibm,client-architecture-support...");
if (call_prom_ret("call-method", 3, 2, &ret,
ADDR("ibm,client-architecture-support"),
root,
return;
}
call_prom("close", 1, 0, root);
+ prom_printf(" not implemented\n");
}
/* no ibm,client-architecture-support call, try the old way */
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
-#include <linux/utsname.h>
#include <linux/screen_info.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
DBG(" thread %d -> cpu %d (hard id %d)\n",
j, cpu, intserv[j]);
- cpu_set(cpu, cpu_present_map);
+ set_cpu_present(cpu, true);
set_hard_smp_processor_id(cpu, intserv[j]);
- cpu_set(cpu, cpu_possible_map);
+ set_cpu_possible(cpu, true);
cpu++;
}
}
maxcpus);
for (cpu = 0; cpu < maxcpus; cpu++)
- cpu_set(cpu, cpu_possible_map);
+ set_cpu_possible(cpu, true);
out:
of_node_put(dn);
}
smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
unsigned int cpu;
- for_each_cpu_mask(cpu, mask)
+ for_each_cpu(cpu, mask)
smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
}
{
BUG_ON(smp_processor_id() != boot_cpuid);
- cpu_set(boot_cpuid, cpu_online_map);
+ set_cpu_online(boot_cpuid, true);
cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
#ifdef CONFIG_PPC64
if (cpu == boot_cpuid)
return -EBUSY;
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
#ifdef CONFIG_PPC64
vdso_data->processorCount--;
fixup_irqs(cpu_online_map);
smp_wmb();
while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
cpu_relax();
- cpu_set(cpu, cpu_online_map);
+ set_cpu_online(cpu, true);
local_irq_enable();
}
#endif
ipi_call_lock();
notify_cpu_starting(cpu);
- cpu_set(cpu, cpu_online_map);
+ set_cpu_online(cpu, true);
/* Update sibling maps */
base = cpu_first_thread_in_core(cpu);
for (i = 0; i < threads_per_core; i++) {
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/sem.h>
+
/*
* Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
static union {
struct vdso_data data;
u8 page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __page_aligned_data;
struct vdso_data *vdso_data = &vdso_data_store.data;
/* Format of the patch table */
goto fail_mmapsem;
}
+ /*
+ * Put vDSO base into mm struct. We need to do this before calling
+ * install_special_mapping or the perf counter mmap tracking code
+ * will fail to recognise it as a vDSO (since arch_vma_name fails).
+ */
+ current->mm->context.vdso_base = vdso_base;
+
/*
* our vma flags don't have VM_WRITE so by default, the process isn't
* allowed to write those pages.
VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
VM_ALWAYSDUMP,
vdso_pagelist);
- if (rc)
+ if (rc) {
+ current->mm->context.vdso_base = 0;
goto fail_mmapsem;
-
- /* Put vDSO base into mm struct */
- current->mm->context.vdso_base = vdso_base;
+ }
up_write(&mm->mmap_sem);
return 0;
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
EXTRA_AFLAGS := -D__VDSO32__ -s
obj-y += vdso32_wrapper.o
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso32_start, vdso32_end
.balign PAGE_SIZE
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
EXTRA_AFLAGS := -D__VDSO64__ -s
obj-y += vdso64_wrapper.o
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso64_start, vdso64_end
.balign PAGE_SIZE
return NULL;
tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
+ if (tbl == NULL)
+ return NULL;
of_parse_dma_window(dev->dev.archdata.of_node, dma_window,
&tbl->it_index, &offset, &size);
vio_cmo_set_dma_ops(viodev);
else
viodev->dev.archdata.dma_ops = &dma_iommu_ops;
- viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
+ set_iommu_table_base(&viodev->dev, vio_build_iommu_table(viodev));
set_dev_node(&viodev->dev, of_node_to_nid(of_node));
/* init generic 'struct device' fields: */
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
+#include <asm/thread_info.h>
ENTRY(_stext)
/* Read-only data */
RODATA
- /* Exception & bug tables */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(0)
NOTES :kernel :notes
*/
. = ALIGN(PAGE_SIZE);
__init_begin = .;
-
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- } :kernel
+ INIT_TEXT_SECTION(PAGE_SIZE) :kernel
/* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
#endif
}
- . = ALIGN(16);
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+ INIT_SETUP(16)
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
+ INIT_CALLS
+ }
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ CON_INITCALL
}
SECURITY_INIT
__stop___fw_ftr_fixup = .;
}
#endif
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
+ INIT_RAM_FS
}
-#endif
+
PERCPU(PAGE_SIZE)
. = ALIGN(8);
#endif
/* The initial task and kernel stack */
-#ifdef CONFIG_PPC32
- . = ALIGN(8192);
-#else
- . = ALIGN(16384);
-#endif
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
+ INIT_TASK_DATA(THREAD_SIZE)
}
- . = ALIGN(PAGE_SIZE);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
+ PAGE_ALIGNED_DATA(PAGE_SIZE)
}
- . = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
+ CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
}
- . = ALIGN(L1_CACHE_BYTES);
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
+ READ_MOSTLY_DATA(L1_CACHE_BYTES)
}
- . = ALIGN(PAGE_SIZE);
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
+ NOSAVE_DATA
}
. = ALIGN(PAGE_SIZE);
* And finally the bss
*/
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- __bss_stop = .;
- }
+ BSS_SECTION(0, 0, 0)
. = ALIGN(PAGE_SIZE);
_end = . ;
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include "mmu_decl.h"
+
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
#ifdef CONFIG_SMP
* support falls into the same category.
*/
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
{
pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
if (!pg)
return pte;
if (!test_bit(PG_arch_1, &pg->flags)) {
+#ifdef CONFIG_8xx
+ /* On 8xx, cache control instructions (particularly
+ * "dcbst" from flush_dcache_icache) fault as write
+ * operation if there is an unpopulated TLB entry
+ * for the address in question. To workaround that,
+ * we invalidate the TLB here, thus avoiding dcbst
+ * misbehaviour.
+ */
+ /* 8xx doesn't care about PID, size or ind args */
+ _tlbil_va(addr, 0, 0, 0);
+#endif /* CONFIG_8xx */
flush_dcache_icache_page(pg);
set_bit(PG_arch_1, &pg->flags);
}
* as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
* instead we "filter out" the exec permission for non clean pages.
*/
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
{
struct page *pg;
* this context might not have been activated yet when this
* is called.
*/
- pte = set_pte_filter(pte);
+ pte = set_pte_filter(pte, addr);
/* Perform the setting of the PTE */
__set_pte_at(mm, addr, ptep, pte, 0);
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/pgtable.h>
-#include <asm/reg.h>
#include <asm/exception-64e.h>
#include <asm/ppc-opcode.h>
static void celleb_dma_dev_setup(struct device *dev)
{
dev->archdata.dma_ops = get_pci_dma_ops();
- dev->archdata.dma_data = (void *)celleb_dma_direct_offset;
+ set_dma_offset(dev, celleb_dma_direct_offset);
}
static void celleb_pci_dma_dev_setup(struct pci_dev *pdev)
static void cell_dma_dev_setup(struct device *dev)
{
- struct dev_archdata *archdata = &dev->archdata;
-
/* Order is important here, these are not mutually exclusive */
if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
cell_dma_dev_setup_fixed(dev);
else if (get_pci_dma_ops() == &dma_iommu_ops)
- archdata->dma_data = cell_get_iommu_table(dev);
+ set_iommu_table_base(dev, cell_get_iommu_table(dev));
else if (get_pci_dma_ops() == &dma_direct_ops)
- archdata->dma_data = (void *)cell_dma_direct_offset;
+ set_dma_offset(dev, cell_dma_direct_offset);
else
BUG();
}
static void cell_dma_dev_setup_fixed(struct device *dev)
{
- struct dev_archdata *archdata = &dev->archdata;
u64 addr;
addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
- archdata->dma_data = (void *)addr;
+ set_dma_offset(dev, addr);
dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
}
pdn->iommu_table = iommu_init_table(tbl, -1);
else
kfree(tbl);
- pdev->dev.archdata.dma_data = pdn->iommu_table;
+ set_iommu_table_base(&pdev->dev, pdn->iommu_table);
}
#else
#define pci_dma_dev_setup_iseries NULL
}
#endif
- dev->dev.archdata.dma_data = &iommu_table_iobmap;
+ set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
}
static void pci_dma_bus_setup_null(struct pci_bus *b) { }
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
for (i = 1; i < ncpus ; ++i)
- cpu_set(i, cpu_present_map);
+ set_cpu_present(i, true);
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
int smp_core99_cpu_disable(void)
{
- cpu_clear(smp_processor_id(), cpu_online_map);
+ set_cpu_online(smp_processor_id(), false);
/* XXX reset cpu affinity here */
mpic_cpu_set_priority(0xf);
int cpu;
for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
- cpu_set(cpu, cpu_possible_map);
+ set_cpu_possible(cpu, true);
smp_ops = &psurge_smp_ops;
}
#endif /* CONFIG_PPC32 */
{
int cpu = smp_processor_id();
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
vdso_data->processorCount--;
/*fix boot_cpuid here*/
for_each_cpu_mask(cpu, tmp) {
BUG_ON(cpu_isset(cpu, cpu_present_map));
- cpu_set(cpu, cpu_present_map);
+ set_cpu_present(cpu, true);
set_hard_smp_processor_id(cpu, *intserv++);
}
err = 0;
if (get_hard_smp_processor_id(cpu) != intserv[i])
continue;
BUG_ON(cpu_online(cpu));
- cpu_clear(cpu, cpu_present_map);
+ set_cpu_present(cpu, false);
set_hard_smp_processor_id(cpu, -1);
break;
}
phb->node);
iommu_table_setparms(phb, dn, tbl);
PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
- dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+ set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
return;
}
dn = dn->parent;
if (dn && PCI_DN(dn))
- dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+ set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
else
printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
pci_name(dev));
*/
if (dma_window == NULL || pdn->parent == NULL) {
pr_debug(" no dma window for device, linking to parent\n");
- dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table;
+ set_iommu_table_base(&dev->dev, PCI_DN(pdn)->iommu_table);
return;
}
pr_debug(" found DMA window, table: %p\n", pci->iommu_table);
}
- dev->dev.archdata.dma_data = pci->iommu_table;
+ set_iommu_table_base(&dev->dev, pci->iommu_table);
}
#else /* CONFIG_PCI */
#define pci_dma_bus_setup_pSeries NULL
--- /dev/null
+#!/usr/bin/perl
+
+# Copyright © 2009 IBM Corporation
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+
+# This script checks the relcoations of a vmlinux for "suspicious"
+# relocations.
+
+use strict;
+use warnings;
+
+if ($#ARGV != 1) {
+ die "$0 [path to objdump] [path to vmlinux]\n";
+}
+
+# Have Kbuild supply the path to objdump so we handle cross compilation.
+my $objdump = shift;
+my $vmlinux = shift;
+my $bad_relocs_count = 0;
+my $bad_relocs = "";
+my $old_binutils = 0;
+
+open(FD, "$objdump -R $vmlinux|") or die;
+while (<FD>) {
+ study $_;
+
+ # Only look at relcoation lines.
+ next if (!/\s+R_/);
+
+ # These relocations are okay
+ next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
+ /R_PPC64_ADDR64\s+mach_/);
+
+ # If we see this type of relcoation it's an idication that
+ # we /may/ be using an old version of binutils.
+ if (/R_PPC64_UADDR64/) {
+ $old_binutils++;
+ }
+
+ $bad_relocs_count++;
+ $bad_relocs .= $_;
+}
+
+if ($bad_relocs_count) {
+ print "WARNING: $bad_relocs_count bad relocations\n";
+ print $bad_relocs;
+}
+
+if ($old_binutils) {
+ print "WARNING: You need at binutils >= 2.19 to build a ".
+ "CONFIG_RELCOATABLE kernel\n";
+}
/* We only have one iommu table on the mac for now, which makes
* things simple. Setup all PCI devices to point to this table
*/
- dev->dev.archdata.dma_data = &iommu_table_dart;
+ set_iommu_table_base(&dev->dev, &iommu_table_dart);
}
static void pci_dma_bus_setup_dart(struct pci_bus *bus)
}
#endif
+static inline int unrecoverable_excp(struct pt_regs *regs)
+{
+#ifdef CONFIG_4xx
+ /* We have no MSR_RI bit on 4xx, so we simply return false */
+ return 0;
+#else
+ return ((regs->msr & MSR_RI) == 0);
+#endif
+}
+
static int xmon_core(struct pt_regs *regs, int fromipi)
{
int cmd = 0;
bp = NULL;
if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF))
bp = at_breakpoint(regs->nip);
- if (bp || (regs->msr & MSR_RI) == 0)
+ if (bp || unrecoverable_excp(regs))
fromipi = 0;
if (!fromipi) {
cpu, BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
- if ((regs->msr & MSR_RI) == 0)
+ if (unrecoverable_excp(regs))
printf("WARNING: exception is not recoverable, "
"can't continue\n");
release_output_lock();
printf("Stopped at breakpoint %x (", BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
- if ((regs->msr & MSR_RI) == 0)
+ if (unrecoverable_excp(regs))
printf("WARNING: exception is not recoverable, "
"can't continue\n");
remove_bpts();
* /proc entries (sysctl)
*/
static const char appldata_proc_name[APPLDATA_PROC_NAME_LENGTH] = "appldata";
-static int appldata_timer_handler(ctl_table *ctl, int write, struct file *filp,
+static int appldata_timer_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
static int appldata_interval_handler(ctl_table *ctl, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos);
* Start/Stop timer, show status of timer (0 = not active, 1 = active)
*/
static int
-appldata_timer_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_timer_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int len;
* current timer interval.
*/
static int
-appldata_interval_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_interval_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int len, interval;
* monitoring (0 = not in process, 1 = in process)
*/
static int
-appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_generic_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct appldata_ops *ops = NULL, *tmp_ops;
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
extern int smp_cpu_polarization[];
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#endif
extern cpumask_t cpu_core_map[NR_CPUS];
-#define topology_core_siblings(cpu) (cpu_core_map[cpu])
#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
int topology_set_cpu_management(int fc);
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/sem.h>
* if debug_active is already off
*/
static int
-s390dbf_procactive(ctl_table *table, int write, struct file *filp,
+s390dbf_procactive(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
if (!write || debug_stoppable || !debug_active)
- return proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(table, write, buffer, lenp, ppos);
else
return 0;
}
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#include <linux/init.h>
#include <linux/module.h>
#include <linux/notifier.h>
-#include <linux/utsname.h>
#include <linux/tick.h>
#include <linux/elfcore.h>
#include <linux/kernel_stat.h>
udelay(10);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
int cpu;
- for_each_cpu_mask(cpu, mask)
+ for_each_cpu(cpu, mask)
smp_ext_bitcall(cpu, ec_call_function);
}
static union {
struct vdso_data data;
u8 page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __page_aligned_data;
struct vdso_data *vdso_data = &vdso_data_store.data;
/*
KBUILD_CFLAGS_31 := $(filter-out -m64,$(KBUILD_CFLAGS))
KBUILD_CFLAGS_31 += -m31 -fPIC -shared -fno-common -fno-builtin
KBUILD_CFLAGS_31 += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
$(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_31)
$(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_31)
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso32_start, vdso32_end
.balign PAGE_SIZE
KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS))
KBUILD_CFLAGS_64 += -m64 -fPIC -shared -fno-common -fno-builtin
KBUILD_CFLAGS_64 += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
$(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_64)
$(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_64)
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso64_start, vdso64_end
.balign PAGE_SIZE
static struct ctl_table cmm_table[];
static int
-cmm_pages_handler(ctl_table *ctl, int write, struct file *filp,
+cmm_pages_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char buf[16], *p;
}
static int
-cmm_timeout_handler(ctl_table *ctl, int write, struct file *filp,
+cmm_timeout_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char buf[64], *p;
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"), __aligned__(THREAD_SIZE))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
struct sh_eth_plat_data sh_eth_plat = {
.phy = 0x1f, /* SMSC LAN8700 */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
+ .ether_link_active_low = 1
};
static struct platform_device sh_eth_device = {
#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
+#include <sound/sh_fsi.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
},
};
+/* FSI */
+/*
+ * FSI-A use external clock which came from ak464x.
+ * So, we should change parent of fsi
+ */
+#define FCLKACR 0xa4150008
+static void fsimck_init(struct clk *clk)
+{
+ u32 status = ctrl_inl(clk->enable_reg);
+
+ /* use external clock */
+ status &= ~0x000000ff;
+ status |= 0x00000080;
+ ctrl_outl(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+ .init = fsimck_init,
+};
+
+static struct clk fsimcka_clk = {
+ .name = "fsimcka_clk",
+ .id = -1,
+ .ops = &fsimck_clk_ops,
+ .enable_reg = (void __iomem *)FCLKACR,
+ .rate = 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+ .porta_flags = SH_FSI_BRS_INV |
+ SH_FSI_OUT_SLAVE_MODE |
+ SH_FSI_IN_SLAVE_MODE |
+ SH_FSI_OFMT(PCM) |
+ SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+ [0] = {
+ .name = "FSI",
+ .start = 0xFE3C0000,
+ .end = 0xFE3C021d,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 108,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device fsi_device = {
+ .name = "sh_fsi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(fsi_resources),
+ .resource = fsi_resources,
+ .dev = {
+ .platform_data = &fsi_info,
+ },
+};
+
/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
&sh_eth_device,
&sh7724_usb0_host_device,
&sh7724_usb1_gadget_device,
+ &fsi_device,
};
#define EEPROM_OP 0xBA206000
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+ struct clk *fsia_clk;
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
+ (1 << 7) | /* AK4643 */
(1 << 12) | /* USB0 */
(1 << 14)), /* RMII */
FPGA_OUT);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
+ /* enable FSI */
+ gpio_request(GPIO_FN_FSIMCKB, NULL);
+ gpio_request(GPIO_FN_FSIMCKA, NULL);
+ gpio_request(GPIO_FN_FSIOASD, NULL);
+ gpio_request(GPIO_FN_FSIIABCK, NULL);
+ gpio_request(GPIO_FN_FSIIALRCK, NULL);
+ gpio_request(GPIO_FN_FSIOABCK, NULL);
+ gpio_request(GPIO_FN_FSIOALRCK, NULL);
+ gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+ gpio_request(GPIO_FN_FSIIBSD, NULL);
+ gpio_request(GPIO_FN_FSIOBSD, NULL);
+ gpio_request(GPIO_FN_FSIIBBCK, NULL);
+ gpio_request(GPIO_FN_FSIIBLRCK, NULL);
+ gpio_request(GPIO_FN_FSIOBBCK, NULL);
+ gpio_request(GPIO_FN_FSIOBLRCK, NULL);
+ gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+ gpio_request(GPIO_FN_FSIIASD, NULL);
+
+ /* change parent of FSI A */
+ fsia_clk = clk_get(NULL, "fsia_clk");
+ clk_register(&fsimcka_clk);
+ clk_set_parent(fsia_clk, &fsimcka_clk);
+ clk_set_rate(fsia_clk, 11000);
+ clk_set_rate(&fsimcka_clk, 11000);
+ clk_put(fsia_clk);
+
/*
* enable SH-Eth
*
# User may have a custom install script
-if [ -x /sbin/installkernel ]; then
- exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+ exec /sbin/${INSTALLKERNEL} "$@"
fi
if [ "$2" = "zImage" ]; then
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:04:11 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:22:50 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
CONFIG_CPU_SUBTYPE_SH7723=y
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:24:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:07 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_MAPLE=y
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Tue Sep 8 13:56:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Wed Aug 26 09:09:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:45:39 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DAB is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:35 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:13 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=1
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_R3964 is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:55 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:30 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="_edosk7760"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x02000000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH7760=y
# CONFIG_I2C_SH_MOBILE is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:27:21 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:58:18 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:12 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:59:45 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_NET is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_HP6XX=y
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:09:16 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:01:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 quiet"
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 21:58:52 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:54:22 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
#
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
#
# LPDDR flash memory drivers
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:45 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:05:49 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FONT_8x16=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:29:50 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:09:59 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
#
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:30:31 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:10:49 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:31:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:14:35 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:17:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
-CONFIG_SUPERH_BUILT_IN_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:33:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:20:53 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4000150
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:34:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:24:31 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_HIGHLANDER=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:37:20 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:29:23 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_HIGHLANDER=y
# CONFIG_I2C_OCORES is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_4KSTACKS=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:39:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:34:29 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
#
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_NET is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:40:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:35:04 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
#
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_BOOTMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:42:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:36:25 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:19 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:39:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:40:25 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="_SDK7780"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x01800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:46:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:45:28 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:46:55 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MII=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:05 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:48:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:52 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:49:00 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:53:32 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:50:49 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:11 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:54:24 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Mon Jun 29 16:28:43 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:50:59 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
#
CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7724_SOLUTION_ENGINE=y
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
#
# Timer and clock configuration
#
# DMA support
#
-# CONFIG_SH_DMA is not set
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=12
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
# Companion Chips
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
CONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
# CONFIG_DAB is not set
#
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_FSI_AK4642=y
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_SND_SOC_WM_HUBS=m
+CONFIG_SND_SOC_AD1836=m
+CONFIG_SND_SOC_AD1938=m
+CONFIG_SND_SOC_AD73311=m
+CONFIG_SND_SOC_AK4104=m
+CONFIG_SND_SOC_AK4535=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_PCM3008=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_SSM2602=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC26=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_UDA1380=m
+CONFIG_SND_SOC_WM8510=m
+CONFIG_SND_SOC_WM8523=m
+CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8728=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8750=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_WM8776=m
+CONFIG_SND_SOC_WM8900=m
+CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8940=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8961=m
+CONFIG_SND_SOC_WM8971=m
+CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8988=m
+CONFIG_SND_SOC_WM8990=m
+CONFIG_SND_SOC_WM8993=m
+CONFIG_SND_SOC_WM9081=m
+CONFIG_SND_SOC_MAX9877=m
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
#
# OTG and related infrastructure
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:00:01 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:58:58 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:02:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:01:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400"
#
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:03:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:03:59 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00810000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# Bus options
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_NULL is not set
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:04:41 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:07:14 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:13 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:11:49 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:14:00 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
#
# Memory hotplug is currently incompatible with Software Suspend
#
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# Board support
#
# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
#
# Timer and clock configuration
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_RUNTIME=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:07:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:15:37 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:05 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:17:16 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
CONFIG_CPU_SUBTYPE_SH7770=y
# CONFIG_CPU_SUBTYPE_SH7780 is not set
#
# Memory hotplug is currently incompatible with Software Suspend
#
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:29 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:39:20 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_GCOV_KERNEL=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
#
# CONFIG_SH_HIGHLANDER is not set
CONFIG_SH_SH7785LCR=y
+# CONFIG_SH_SH7785LCR_PT is not set
#
# Timer and clock configuration
CONFIG_SH_PCLK_FREQ=50000000
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
#
# DMA support
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
#
# Boot options
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_NET=y
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOPCA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_SH_WDT=y
+# CONFIG_SH_WDT_MMAP is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
-CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=y
+CONFIG_SND_OPL3_LIB_SEQ=y
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=y
+CONFIG_SND_OPL3_LIB=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+CONFIG_SND_CMIPCI=y
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
-# CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=m
# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_ZEROPLUS=m
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# Miscellaneous USB options
#
-CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-CONFIG_USB_TEST=m
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_SH is not set
# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
#
# TI VLYNQ
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
+CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_SCHED_TRACER=y
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_STACK_TRACER=y
+CONFIG_KMEMTRACE=y
+CONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_SH_NO_BSS_INIT is not set
+CONFIG_DWARF_UNWINDER=y
+CONFIG_MCOUNT=y
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:09:34 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:23:18 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOPCA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:10:33 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:27:17 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00210000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:11:03 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:29:26 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00010000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00010000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:03:04 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:33:00 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:35:03 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:36:36 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x009e0000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_MTD=m
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
#
# User Modules And Translation Layers
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:14:36 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:42:33 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=m
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
# CONFIG_IWM is not set
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
# CONFIG_USB_HWA_HCD is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:15:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:46:13 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
+# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_SH_PCIDMA_NONCOHERENT is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOPCA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
menu "DMA support"
-config SH_DMA_API
- bool
config SH_DMA
bool "SuperH on-chip DMA controller (DMAC) support"
depends on CPU_SH3 || CPU_SH4
- select SH_DMA_API
default n
config SH_DMA_IRQ_MULTI
CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
CPU_SUBTYPE_SH7760
+config SH_DMA_API
+ depends on SH_DMA
+ bool "SuperH DMA API support"
+ default n
+ help
+ SH_DMA_API always enabled DMA API of used SuperH.
+ If you want to use DMA ENGINE, you must not enable this.
+ Please enable DMA_ENGINE and SH_DMAE.
+
config NR_ONCHIP_DMA_CHANNELS
int
depends on SH_DMA
# Makefile for the SuperH DMA specific kernel interface routines under Linux.
#
-obj-$(CONFIG_SH_DMA_API) += dma-api.o dma-sysfs.o
-obj-$(CONFIG_SH_DMA) += dma-sh.o
+obj-$(CONFIG_SH_DMA_API) += dma-sh.o dma-api.o dma-sysfs.o
obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o
obj-$(CONFIG_G2_DMA) += dma-g2.o
obj-$(CONFIG_SH_DMABRG) += dmabrg.o
#define CHCR 0x0C
#define DMAOR 0x40
+/*
+ * for dma engine
+ *
+ * SuperH DMA mode
+ */
+#define SHDMA_MIX_IRQ (1 << 1)
+#define SHDMA_DMAOR1 (1 << 2)
+#define SHDMA_DMAE1 (1 << 3)
+
+struct sh_dmae_pdata {
+ unsigned int mode;
+};
+
#endif /* __DMA_SH_H */
void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
#else
#define cpu_to_node(cpu) ((void)(cpu),0)
#define parent_node(node) ((void)(node),0)
-#define node_to_cpumask(node) ((void)node, cpu_online_map)
#define cpumask_of_node(node) ((void)node, cpu_online_mask)
#define pcibus_to_node(bus) ((void)(bus), -1)
#include <linux/sh_timer.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
+#include <asm/dma-sh.h>
#include <cpu/sh7722.h>
static struct resource rtc_resources[] = {
},
};
+static struct sh_dmae_pdata dma_platform_data = {
+ .mode = 0,
+};
+
+static struct platform_device dma_device = {
+ .name = "sh-dma-engine",
+ .id = -1,
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
static struct platform_device *sh7722_devices[] __initdata = {
&cmt_device,
&tmu0_device,
&vpu_device,
&veu_device,
&jpu_device,
+ &dma_device,
};
static int __init sh7722_devices_setup(void)
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
+#include <asm/dma-sh.h>
static struct sh_timer_config tmu0_platform_data = {
.name = "TMU0",
},
};
+static struct sh_dmae_pdata dma_platform_data = {
+ .mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1),
+};
+
+static struct platform_device dma_device = {
+ .name = "sh-dma-engine",
+ .id = -1,
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
static struct platform_device *sh7780_devices[] __initdata = {
&tmu0_device,
&tmu1_device,
&tmu5_device,
&rtc_device,
&sci_device,
+ &dma_device,
};
static int __init sh7780_devices_setup(void)
#include <asm/unwinder.h>
#include <asm/sections.h>
#include <asm/unaligned.h>
-#include <asm/dwarf.h>
#include <asm/stacktrace.h>
/* Reserve enough memory for two stack frames */
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
}
#ifdef CONFIG_IRQSTACKS
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__section__(".bss.page_aligned")));
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__section__(".bss.page_aligned")));
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
/*
* allocate per-cpu stacks for hardirq and for softirq processing
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/ipc.h>
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/syscalls.h>
#include <linux/ipc.h>
#include <asm/uaccess.h>
u_int rm;
int ret, index;
+ /*
+ * XXX: We can't handle mixed 16/32-bit instructions yet
+ */
+ if (instruction_size(instruction) != 2)
+ return -EINVAL;
+
index = (instruction>>8)&15; /* 0x0F00 */
rm = regs->regs[index];
se_user += 1;
-#ifndef CONFIG_CPU_SH2A
set_fs(USER_DS);
- if (copy_from_user(&instruction, (u16 *)(regs->pc & ~1), 2)) {
+ if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
+ sizeof(instruction))) {
set_fs(oldfs);
goto uspace_segv;
}
"in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
current->comm, current->pid, (void *)regs->pc,
instruction);
-#endif
if (se_usermode & 2)
goto fixup;
} else {
se_sys += 1;
- if (se_kernmode_warn)
- printk(KERN_NOTICE "Unaligned kernel access "
- "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- current->comm, current->pid, (void *)regs->pc,
- instruction);
-
if (regs->pc & 1)
die("unaligned program counter", regs, error_code);
die("insn faulting in do_address_error", regs, 0);
}
+ if (se_kernmode_warn)
+ printk(KERN_NOTICE "Unaligned kernel access "
+ "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+ current->comm, current->pid, (void *)regs->pc,
+ instruction);
+
handle_unaligned_access(instruction, regs,
&user_mem_access, 0);
set_fs(oldfs);
export CPPFLAGS_vsyscall.lds += -P -C -Ush
vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags)
#KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
KBUILD_AFLAGS += -m32
-CPPFLAGS_vmlinux.lds += -m32
#LDFLAGS_vmlinux = -N -Ttext 0xf0004000
# Since 2.5.40, the first stage is left not btfix-ed.
CHECKFLAGS += -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64
-# Undefine sparc when processing vmlinux.lds - it is used
-# And teach CPP we are doing 64 bit builds (for this case)
-CPPFLAGS_vmlinux.lds += -m64 -Usparc
LDFLAGS := -m elf64_sparc
export BITS := 64
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* General functions that each host system must provide.
#define parent_node(node) (node)
-static inline cpumask_t node_to_cpumask(int node)
-{
- return numa_cpumask_lookup_table[node];
-}
#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
-/*
- * Returns a pointer to the cpumask of CPUs on Node 'node'.
- * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
- */
-#define node_to_cpumask_ptr(v, node) \
- cpumask_t *v = &(numa_cpumask_lookup_table[node])
-
-#define node_to_cpumask_ptr_next(v, node) \
- v = &(numa_cpumask_lookup_table[node])
-
struct pci_bus;
#ifdef CONFIG_PCI
extern int pcibus_to_node(struct pci_bus *pbus);
#ifdef CONFIG_SMP
#define topology_physical_package_id(cpu) (cpu_data(cpu).proc_id)
#define topology_core_id(cpu) (cpu_data(cpu).core_id)
-#define topology_core_siblings(cpu) (cpu_core_map[cpu])
-#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
#define topology_thread_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu))
#define mc_capable() (sparc64_multi_core)
static inline u32 vio_dring_avail(struct vio_dring_state *dr,
unsigned int ring_size)
{
- MAYBE_BUILD_BUG_ON(!is_power_of_2(ring_size));
-
return (dr->pending -
((dr->prod - dr->cons) & (ring_size - 1)));
}
extra-y := head_$(BITS).o
extra-y += init_task.o
-extra-y += vmlinux.lds
+
+# Undefine sparc when processing vmlinux.lds - it is used
+# And teach CPP we are doing $(BITS) builds (for this case)
+CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS)
+extra-y += vmlinux.lds
obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o
obj-$(CONFIG_SPARC32) += etrap_32.o
* If this is not aligned on a 8k boundry, then you should change code
* in etrap.S which assumes it.
*/
-union thread_union init_thread_union
- __attribute__((section (".data.init_task")))
- = { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/utsname.h>
#include <asm/utrap.h>
#include <asm/signal.h>
+struct new_utsname;
+
extern asmlinkage unsigned long sys_getpagesize(void);
extern asmlinkage unsigned long sparc_brk(unsigned long brk);
extern asmlinkage long sparc_pipe(struct pt_regs *regs);
$(call cc-option, -fno-stack-protector,) \
$(call cc-option, -fno-stack-protector-all,)
-CONFIG_KERNEL_STACK_ORDER ?= 2
-STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
-
-CPPFLAGS_vmlinux.lds = -U$(SUBARCH) -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \
- -DELF_FORMAT="$(ELF_FORMAT)" -DKERNEL_STACK_SIZE=$(STACK_SIZE)
+# Options used by linker script
+export LDS_START := $(START)
+export LDS_ELF_ARCH := $(ELF_ARCH)
+export LDS_ELF_FORMAT := $(ELF_FORMAT)
# The wrappers will select whether using "malloc" or the kernel allocator.
LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
. = ALIGN(4096);
.note : { *(.note.*) }
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(0)
BUG_TABLE
}
.init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+ INIT_SETUP(0)
}
- . = ALIGN(32);
- .data.percpu : {
- __per_cpu_start = . ;
- *(.data.percpu)
- __per_cpu_end = . ;
- }
+ PERCPU(32)
.initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
+ INIT_CALLS
}
.con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ CON_INITCALL
}
.uml.initcall.init : {
. = ALIGN(4096);
.init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
+ INIT_RAM_FS
}
unsigned cpu = smp_processor_id();
if(prev != next){
- cpu_clear(cpu, prev->cpu_vm_mask);
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+ cpumask_set_cpu(cpu, mm_cpumask(next));
if(next != &init_mm)
__switch_mm(&next->context.id);
}
# Licensed under the GPL
#
+CPPFLAGS_vmlinux.lds := -U$(SUBARCH) -DSTART=$(LDS_START) \
+ -DELF_ARCH=$(LDS_ELF_ARCH) \
+ -DELF_FORMAT=$(LDS_ELF_FORMAT)
extra-y := vmlinux.lds
clean-files :=
_text = .;
_stext = .;
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
.init_array : { *(.init_array) }
.fini_array : { *(.fini_array) }
.data : {
- . = ALIGN(KERNEL_STACK_SIZE); /* init_task */
- *(.data.init_task)
+ INIT_TASK_DATA(KERNEL_STACK_SIZE)
. = ALIGN(KERNEL_STACK_SIZE);
*(.data.init_irqstack)
DATA_DATA
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
union thread_union cpu0_irqstack
__attribute__((__section__(".data.init_irqstack"))) =
int i;
for (i = 0; i < ncpus; ++i)
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
cpu_clear(me, cpu_online_map);
cpu_set(me, cpu_online_map);
_text = .;
_stext = .;
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
.text :
init.data : { INIT_DATA }
.data :
{
- . = ALIGN(KERNEL_STACK_SIZE); /* init_task */
- *(.data.init_task)
+ INIT_TASK_DATA(KERNEL_STACK_SIZE)
. = ALIGN(KERNEL_STACK_SIZE);
*(.data.init_irqstack)
DATA_DATA
_edata = .;
PROVIDE (edata = .);
. = ALIGN(PAGE_SIZE);
- .sbss :
- {
- __bss_start = .;
- PROVIDE(_bss_start = .);
- *(.sbss)
- *(.scommon)
- }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
+ __bss_start = .;
+ PROVIDE(_bss_start = .);
+ SBSS(0)
+ BSS(0)
_end = .;
PROVIDE (end = .);
+
+KERNEL_STACK_SIZE = 4096 * (1 << CONFIG_KERNEL_STACK_ORDER);
+
#ifdef CONFIG_LD_SCRIPT_STATIC
#include "uml.lds.S"
#else
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
- echo ' (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
#ifndef _ASM_X86_CACHE_H
#define _ASM_X86_CACHE_H
+#include <linux/linkage.h>
+
/* L1 cache line size */
#define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT)
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#ifdef CONFIG_SMP
#define __cacheline_aligned_in_smp \
__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT)))) \
- __attribute__((__section__(".data.page_aligned")))
+ __page_aligned_data
#endif
#endif
if (likely(prev != next)) {
/* stop flush ipis for the previous mm */
- cpu_clear(cpu, prev->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
#ifdef CONFIG_SMP
percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
percpu_write(cpu_tlbstate.active_mm, next);
#endif
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_set_cpu(cpu, mm_cpumask(next));
/* Re-load page tables */
load_cr3(next->pgd);
percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
- if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+ if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next))) {
/* We were in lazy tlb mode and leave_mm disabled
* tlb flush IPI delivery. We must reload CR3
* to make sure to use no freed page tables.
#define NMI_INVALID 3
struct ctl_table;
-struct file;
-extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
+extern int proc_nmi_enabled(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
extern int unknown_nmi_panic;
static inline const struct cpumask *
cpumask_of_pcibus(const struct pci_bus *bus)
{
- return cpumask_of_node(__pcibus_to_node(bus));
+ int node;
+
+ node = __pcibus_to_node(bus);
+ return (node == -1) ? cpu_online_mask :
+ cpumask_of_node(node);
}
#endif
smp_ops.send_call_func_single_ipi(cpu);
}
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
smp_ops.send_call_func_ipi(mask);
cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
if (cfg) {
- if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
+ if (!zalloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
kfree(cfg);
cfg = NULL;
- } else if (!alloc_cpumask_var_node(&cfg->old_domain,
+ } else if (!zalloc_cpumask_var_node(&cfg->old_domain,
GFP_ATOMIC, node)) {
free_cpumask_var(cfg->domain);
kfree(cfg);
cfg = NULL;
- } else {
- cpumask_clear(cfg->domain);
- cpumask_clear(cfg->old_domain);
}
}
/*
* proc handler for /proc/sys/kernel/nmi
*/
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
+int proc_nmi_enabled(struct ctl_table *table, int write,
void __user *buffer, size_t *length, loff_t *ppos)
{
int old_state;
nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
old_state = nmi_watchdog_enabled;
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
if (!!old_state == !!nmi_watchdog_enabled)
return 0;
#include <linux/kallsyms.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
-#include <linux/utsname.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
-#include <linux/utsname.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/module.h>
/*
* BSS section
*/
-.section ".bss.page_aligned","wa"
+__PAGE_ALIGNED_BSS
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
swapper_pg_pmd:
* This starts the data section.
*/
#ifdef CONFIG_X86_PAE
-.section ".data.page_aligned","wa"
+__PAGE_ALIGNED_DATA
/* Page-aligned for the benefit of paravirt? */
.align PAGE_SIZE_asm
ENTRY(swapper_pg_dir)
ENTRY(idt_table)
.skip IDT_ENTRIES * 16
- .section .bss.page_aligned, "aw", @nobits
+ __PAGE_ALIGNED_BSS
.align PAGE_SIZE
ENTRY(empty_zero_page)
.skip PAGE_SIZE
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#ifdef CONFIG_SMP
preempt_disable();
load_LDT(pc);
- if (!cpus_equal(current->mm->cpu_vm_mask,
- cpumask_of_cpu(smp_processor_id())))
+ if (!cpumask_equal(mm_cpumask(current->mm),
+ cpumask_of(smp_processor_id())))
smp_call_function(flush_ldt, current->mm, 1);
preempt_enable();
#else
void __init init_c1e_mask(void)
{
/* If we're using c1e_idle, we need to allocate c1e_mask. */
- if (pm_idle == c1e_idle) {
- alloc_cpumask_var(&c1e_mask, GFP_KERNEL);
- cpumask_clear(c1e_mask);
- }
+ if (pm_idle == c1e_idle)
+ zalloc_cpumask_var(&c1e_mask, GFP_KERNEL);
}
static int __init idle_setup(char *str)
#endif
current_thread_info()->cpu = 0; /* needed? */
for_each_possible_cpu(i) {
- alloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
- alloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
- alloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL);
- cpumask_clear(per_cpu(cpu_core_map, i));
- cpumask_clear(per_cpu(cpu_sibling_map, i));
- cpumask_clear(cpu_data(i).llc_shared_map);
+ zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL);
}
set_cpu_sibling_map(0);
void __init setup_default_timer_irq(void)
{
- irq0.mask = cpumask_of_cpu(0);
setup_irq(0, &irq0);
}
#include <linux/spinlock.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
-#include <linux/utsname.h>
#include <linux/kdebug.h>
#include <linux/kernel.h>
#include <linux/module.h>
}
#ifdef CONFIG_SYSCTL
-
-static int
-vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
-}
-
static ctl_table kernel_table2[] = {
{ .procname = "vsyscall64",
.data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = vsyscall_sysctl_change },
+ .proc_handler = proc_dointvec },
{}
};
info.si_errno = 0;
info.si_code = si_code;
info.si_addr = (void __user *)address;
+ info.si_addr_lsb = si_code == BUS_MCEERR_AR ? PAGE_SHIFT : 0;
force_sig_info(si_signo, &info, tsk);
}
}
static void
-do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
+do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
+ unsigned int fault)
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
+ int code = BUS_ADRERR;
up_read(&mm->mmap_sem);
tsk->thread.error_code = error_code;
tsk->thread.trap_no = 14;
- force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
+#ifdef CONFIG_MEMORY_FAILURE
+ if (fault & VM_FAULT_HWPOISON) {
+ printk(KERN_ERR
+ "MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n",
+ tsk->comm, tsk->pid, address);
+ code = BUS_MCEERR_AR;
+ }
+#endif
+ force_sig_info_fault(SIGBUS, code, address, tsk);
}
static noinline void
if (fault & VM_FAULT_OOM) {
out_of_memory(regs, error_code, address);
} else {
- if (fault & VM_FAULT_SIGBUS)
- do_sigbus(regs, error_code, address);
+ if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON))
+ do_sigbus(regs, error_code, address, fault);
else
BUG();
}
mb();
}
+EXPORT_SYMBOL_GPL(clflush_cache_range);
static void __cpa_flush_all(void *arg)
{
{
if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
BUG();
- cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
+ cpumask_clear_cpu(cpu,
+ mm_cpumask(percpu_read(cpu_tlbstate.active_mm)));
load_cr3(swapper_pg_dir);
}
EXPORT_SYMBOL_GPL(leave_mm);
preempt_disable();
local_flush_tlb();
- if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+ if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+ flush_tlb_others(mm_cpumask(mm), mm, TLB_FLUSH_ALL);
preempt_enable();
}
else
leave_mm(smp_processor_id());
}
- if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+ if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+ flush_tlb_others(mm_cpumask(mm), mm, TLB_FLUSH_ALL);
preempt_enable();
}
leave_mm(smp_processor_id());
}
- if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(&mm->cpu_vm_mask, mm, va);
+ if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+ flush_tlb_others(mm_cpumask(mm), mm, va);
preempt_enable();
}
#else /* CONFIG_X86_32 */
-static unsigned char mp_bus_to_node[BUS_NR] = {
+static int mp_bus_to_node[BUS_NR] = {
[0 ... BUS_NR - 1] = -1
};
$(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \
-Wl,-T,$(filter %.lds,$^) $(filter %.o,$^)
-VDSO_LDFLAGS = -fPIC -shared $(call ld-option, -Wl$(comma)--hash-style=sysv)
+VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
GCOV_PROFILE := n
#
/* Get the "official" set of cpus referring to our pagetable. */
if (!alloc_cpumask_var(&mask, GFP_ATOMIC)) {
for_each_online_cpu(cpu) {
- if (!cpumask_test_cpu(cpu, &mm->cpu_vm_mask)
+ if (!cpumask_test_cpu(cpu, mm_cpumask(mm))
&& per_cpu(xen_current_cr3, cpu) != __pa(mm->pgd))
continue;
smp_call_function_single(cpu, drop_other_mm_ref, mm, 1);
}
return;
}
- cpumask_copy(mask, &mm->cpu_vm_mask);
+ cpumask_copy(mask, mm_cpumask(mm));
/* It's possible that a vcpu may have a stale reference to our
cr3, because its in lazy mode, and it hasn't yet flushed
-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
quiet_cmd__cpp_lds_S = LDS $@
- cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
+ cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
+ | sed $(sed-y) >$@
$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
$(call if_changed_dep,_cpp_lds_S)
* BSS section
*/
-.section ".bss.page_aligned", "w"
+__PAGE_ALIGNED_BSS
#ifdef CONFIG_MMU
ENTRY(swapper_pg_dir)
.fill PAGE_SIZE, 1, 0
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
-{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
struct task_struct init_task = INIT_TASK(init_task);
*/
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
#include <variant/core.h>
#include <platform/hardware.h>
.fixup : { *(.fixup) }
- . = ALIGN(16);
-
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
-
+ EXCEPTION_TABLE(16)
/* Data section */
- . = ALIGN(XCHAL_ICACHE_LINESIZE);
_fdata = .;
- .data :
- {
- DATA_DATA
- CONSTRUCTORS
- . = ALIGN(XCHAL_ICACHE_LINESIZE);
- *(.data.cacheline_aligned)
- }
-
+ RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
_edata = .;
- /* The initial task */
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
-
/* Initialization code and data: */
- . = ALIGN(1 << 12);
+ . = ALIGN(PAGE_SIZE);
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
.init.data :
{
.DebugInterruptVector.text);
__boot_reloc_table_end = ABSOLUTE(.) ;
- }
- . = ALIGN(XCHAL_ICACHE_LINESIZE);
-
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
-
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
+ INIT_SETUP(XCHAL_ICACHE_LINESIZE)
+ INIT_CALLS
+ CON_INITCALL
+ SECURITY_INITCALL
+ INIT_RAM_FS
}
- __initcall_end = .;
-
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
-
- SECURITY_INIT
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4096);
- __initramfs_start =.;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
-#endif
-
- PERCPU(4096)
+ PERCPU(PAGE_SIZE)
/* We need this dummy segment here */
.DoubleExceptionVector.literal)
. = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
- . = ALIGN(1 << 12);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
- . = ALIGN(8192);
-
- /* BSS section */
- _bss_start = .;
- .bss : { *(.bss.page_aligned) *(.bss) }
- _bss_end = .;
+ BSS_SECTION(0, 8192, 0)
_end = .;
tristate
select ASYNC_CORE
+config ASYNC_PQ
+ tristate
+ select ASYNC_CORE
+
+config ASYNC_RAID6_RECOV
+ tristate
+ select ASYNC_CORE
+ select ASYNC_PQ
+
obj-$(CONFIG_ASYNC_MEMCPY) += async_memcpy.o
obj-$(CONFIG_ASYNC_MEMSET) += async_memset.o
obj-$(CONFIG_ASYNC_XOR) += async_xor.o
+obj-$(CONFIG_ASYNC_PQ) += async_pq.o
+obj-$(CONFIG_ASYNC_RAID6_RECOV) += async_raid6_recov.o
+obj-$(CONFIG_ASYNC_RAID6_TEST) += raid6test.o
* async_memcpy - attempt to copy memory with a dma engine.
* @dest: destination page
* @src: src page
- * @offset: offset in pages to start transaction
+ * @dest_offset: offset into 'dest' to start transaction
+ * @src_offset: offset into 'src' to start transaction
* @len: length in bytes
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK,
- * @depend_tx: memcpy depends on the result of this transaction
- * @cb_fn: function to call when the memcpy completes
- * @cb_param: parameter to pass to the callback routine
+ * @submit: submission / completion modifiers
+ *
+ * honored flags: ASYNC_TX_ACK
*/
struct dma_async_tx_descriptor *
async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
- unsigned int src_offset, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ unsigned int src_offset, size_t len,
+ struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_MEMCPY,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_MEMCPY,
&dest, 1, &src, 1, len);
struct dma_device *device = chan ? chan->device : NULL;
struct dma_async_tx_descriptor *tx = NULL;
- if (device) {
+ if (device && is_dma_copy_aligned(device, src_offset, dest_offset, len)) {
dma_addr_t dma_dest, dma_src;
- unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
+ unsigned long dma_prep_flags = 0;
+ if (submit->cb_fn)
+ dma_prep_flags |= DMA_PREP_INTERRUPT;
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_prep_flags |= DMA_PREP_FENCE;
dma_dest = dma_map_page(device->dev, dest, dest_offset, len,
DMA_FROM_DEVICE);
if (tx) {
pr_debug("%s: (async) len: %zu\n", __func__, len);
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else {
void *dest_buf, *src_buf;
pr_debug("%s: (sync) len: %zu\n", __func__, len);
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
dest_buf = kmap_atomic(dest, KM_USER0) + dest_offset;
src_buf = kmap_atomic(src, KM_USER1) + src_offset;
kunmap_atomic(dest_buf, KM_USER0);
kunmap_atomic(src_buf, KM_USER1);
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
return tx;
}
EXPORT_SYMBOL_GPL(async_memcpy);
-static int __init async_memcpy_init(void)
-{
- return 0;
-}
-
-static void __exit async_memcpy_exit(void)
-{
- do { } while (0);
-}
-
-module_init(async_memcpy_init);
-module_exit(async_memcpy_exit);
-
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("asynchronous memcpy api");
MODULE_LICENSE("GPL");
* @val: fill value
* @offset: offset in pages to start transaction
* @len: length in bytes
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: memset depends on the result of this transaction
- * @cb_fn: function to call when the memcpy completes
- * @cb_param: parameter to pass to the callback routine
+ *
+ * honored flags: ASYNC_TX_ACK
*/
struct dma_async_tx_descriptor *
-async_memset(struct page *dest, int val, unsigned int offset,
- size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+async_memset(struct page *dest, int val, unsigned int offset, size_t len,
+ struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_MEMSET,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_MEMSET,
&dest, 1, NULL, 0, len);
struct dma_device *device = chan ? chan->device : NULL;
struct dma_async_tx_descriptor *tx = NULL;
- if (device) {
+ if (device && is_dma_fill_aligned(device, offset, 0, len)) {
dma_addr_t dma_dest;
- unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
+ unsigned long dma_prep_flags = 0;
+ if (submit->cb_fn)
+ dma_prep_flags |= DMA_PREP_INTERRUPT;
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_prep_flags |= DMA_PREP_FENCE;
dma_dest = dma_map_page(device->dev, dest, offset, len,
DMA_FROM_DEVICE);
if (tx) {
pr_debug("%s: (async) len: %zu\n", __func__, len);
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else { /* run the memset synchronously */
void *dest_buf;
pr_debug("%s: (sync) len: %zu\n", __func__, len);
- dest_buf = (void *) (((char *) page_address(dest)) + offset);
+ dest_buf = page_address(dest) + offset;
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
memset(dest_buf, val, len);
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
return tx;
}
EXPORT_SYMBOL_GPL(async_memset);
-static int __init async_memset_init(void)
-{
- return 0;
-}
-
-static void __exit async_memset_exit(void)
-{
- do { } while (0);
-}
-
-module_init(async_memset_init);
-module_exit(async_memset_exit);
-
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("asynchronous memset api");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright(c) 2007 Yuri Tikhonov <yur@emcraft.com>
+ * Copyright(c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/raid/pq.h>
+#include <linux/async_tx.h>
+
+/**
+ * scribble - space to hold throwaway P buffer for synchronous gen_syndrome
+ */
+static struct page *scribble;
+
+static bool is_raid6_zero_block(struct page *p)
+{
+ return p == (void *) raid6_empty_zero_page;
+}
+
+/* the struct page *blocks[] parameter passed to async_gen_syndrome()
+ * and async_syndrome_val() contains the 'P' destination address at
+ * blocks[disks-2] and the 'Q' destination address at blocks[disks-1]
+ *
+ * note: these are macros as they are used as lvalues
+ */
+#define P(b, d) (b[d-2])
+#define Q(b, d) (b[d-1])
+
+/**
+ * do_async_gen_syndrome - asynchronously calculate P and/or Q
+ */
+static __async_inline struct dma_async_tx_descriptor *
+do_async_gen_syndrome(struct dma_chan *chan, struct page **blocks,
+ const unsigned char *scfs, unsigned int offset, int disks,
+ size_t len, dma_addr_t *dma_src,
+ struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct dma_device *dma = chan->device;
+ enum dma_ctrl_flags dma_flags = 0;
+ enum async_tx_flags flags_orig = submit->flags;
+ dma_async_tx_callback cb_fn_orig = submit->cb_fn;
+ dma_async_tx_callback cb_param_orig = submit->cb_param;
+ int src_cnt = disks - 2;
+ unsigned char coefs[src_cnt];
+ unsigned short pq_src_cnt;
+ dma_addr_t dma_dest[2];
+ int src_off = 0;
+ int idx;
+ int i;
+
+ /* DMAs use destinations as sources, so use BIDIRECTIONAL mapping */
+ if (P(blocks, disks))
+ dma_dest[0] = dma_map_page(dma->dev, P(blocks, disks), offset,
+ len, DMA_BIDIRECTIONAL);
+ else
+ dma_flags |= DMA_PREP_PQ_DISABLE_P;
+ if (Q(blocks, disks))
+ dma_dest[1] = dma_map_page(dma->dev, Q(blocks, disks), offset,
+ len, DMA_BIDIRECTIONAL);
+ else
+ dma_flags |= DMA_PREP_PQ_DISABLE_Q;
+
+ /* convert source addresses being careful to collapse 'empty'
+ * sources and update the coefficients accordingly
+ */
+ for (i = 0, idx = 0; i < src_cnt; i++) {
+ if (is_raid6_zero_block(blocks[i]))
+ continue;
+ dma_src[idx] = dma_map_page(dma->dev, blocks[i], offset, len,
+ DMA_TO_DEVICE);
+ coefs[idx] = scfs[i];
+ idx++;
+ }
+ src_cnt = idx;
+
+ while (src_cnt > 0) {
+ submit->flags = flags_orig;
+ pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
+ /* if we are submitting additional pqs, leave the chain open,
+ * clear the callback parameters, and leave the destination
+ * buffers mapped
+ */
+ if (src_cnt > pq_src_cnt) {
+ submit->flags &= ~ASYNC_TX_ACK;
+ submit->flags |= ASYNC_TX_FENCE;
+ dma_flags |= DMA_COMPL_SKIP_DEST_UNMAP;
+ submit->cb_fn = NULL;
+ submit->cb_param = NULL;
+ } else {
+ dma_flags &= ~DMA_COMPL_SKIP_DEST_UNMAP;
+ submit->cb_fn = cb_fn_orig;
+ submit->cb_param = cb_param_orig;
+ if (cb_fn_orig)
+ dma_flags |= DMA_PREP_INTERRUPT;
+ }
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+
+ /* Since we have clobbered the src_list we are committed
+ * to doing this asynchronously. Drivers force forward
+ * progress in case they can not provide a descriptor
+ */
+ for (;;) {
+ tx = dma->device_prep_dma_pq(chan, dma_dest,
+ &dma_src[src_off],
+ pq_src_cnt,
+ &coefs[src_off], len,
+ dma_flags);
+ if (likely(tx))
+ break;
+ async_tx_quiesce(&submit->depend_tx);
+ dma_async_issue_pending(chan);
+ }
+
+ async_tx_submit(chan, tx, submit);
+ submit->depend_tx = tx;
+
+ /* drop completed sources */
+ src_cnt -= pq_src_cnt;
+ src_off += pq_src_cnt;
+
+ dma_flags |= DMA_PREP_CONTINUE;
+ }
+
+ return tx;
+}
+
+/**
+ * do_sync_gen_syndrome - synchronously calculate a raid6 syndrome
+ */
+static void
+do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
+ size_t len, struct async_submit_ctl *submit)
+{
+ void **srcs;
+ int i;
+
+ if (submit->scribble)
+ srcs = submit->scribble;
+ else
+ srcs = (void **) blocks;
+
+ for (i = 0; i < disks; i++) {
+ if (is_raid6_zero_block(blocks[i])) {
+ BUG_ON(i > disks - 3); /* P or Q can't be zero */
+ srcs[i] = blocks[i];
+ } else
+ srcs[i] = page_address(blocks[i]) + offset;
+ }
+ raid6_call.gen_syndrome(disks, len, srcs);
+ async_tx_sync_epilog(submit);
+}
+
+/**
+ * async_gen_syndrome - asynchronously calculate a raid6 syndrome
+ * @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1
+ * @offset: common offset into each block (src and dest) to start transaction
+ * @disks: number of blocks (including missing P or Q, see below)
+ * @len: length of operation in bytes
+ * @submit: submission/completion modifiers
+ *
+ * General note: This routine assumes a field of GF(2^8) with a
+ * primitive polynomial of 0x11d and a generator of {02}.
+ *
+ * 'disks' note: callers can optionally omit either P or Q (but not
+ * both) from the calculation by setting blocks[disks-2] or
+ * blocks[disks-1] to NULL. When P or Q is omitted 'len' must be <=
+ * PAGE_SIZE as a temporary buffer of this size is used in the
+ * synchronous path. 'disks' always accounts for both destination
+ * buffers.
+ *
+ * 'blocks' note: if submit->scribble is NULL then the contents of
+ * 'blocks' may be overridden
+ */
+struct dma_async_tx_descriptor *
+async_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
+ size_t len, struct async_submit_ctl *submit)
+{
+ int src_cnt = disks - 2;
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ,
+ &P(blocks, disks), 2,
+ blocks, src_cnt, len);
+ struct dma_device *device = chan ? chan->device : NULL;
+ dma_addr_t *dma_src = NULL;
+
+ BUG_ON(disks > 255 || !(P(blocks, disks) || Q(blocks, disks)));
+
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) blocks;
+
+ if (dma_src && device &&
+ (src_cnt <= dma_maxpq(device, 0) ||
+ dma_maxpq(device, DMA_PREP_CONTINUE) > 0) &&
+ is_dma_pq_aligned(device, offset, 0, len)) {
+ /* run the p+q asynchronously */
+ pr_debug("%s: (async) disks: %d len: %zu\n",
+ __func__, disks, len);
+ return do_async_gen_syndrome(chan, blocks, raid6_gfexp, offset,
+ disks, len, dma_src, submit);
+ }
+
+ /* run the pq synchronously */
+ pr_debug("%s: (sync) disks: %d len: %zu\n", __func__, disks, len);
+
+ /* wait for any prerequisite operations */
+ async_tx_quiesce(&submit->depend_tx);
+
+ if (!P(blocks, disks)) {
+ P(blocks, disks) = scribble;
+ BUG_ON(len + offset > PAGE_SIZE);
+ }
+ if (!Q(blocks, disks)) {
+ Q(blocks, disks) = scribble;
+ BUG_ON(len + offset > PAGE_SIZE);
+ }
+ do_sync_gen_syndrome(blocks, offset, disks, len, submit);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(async_gen_syndrome);
+
+/**
+ * async_syndrome_val - asynchronously validate a raid6 syndrome
+ * @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1
+ * @offset: common offset into each block (src and dest) to start transaction
+ * @disks: number of blocks (including missing P or Q, see below)
+ * @len: length of operation in bytes
+ * @pqres: on val failure SUM_CHECK_P_RESULT and/or SUM_CHECK_Q_RESULT are set
+ * @spare: temporary result buffer for the synchronous case
+ * @submit: submission / completion modifiers
+ *
+ * The same notes from async_gen_syndrome apply to the 'blocks',
+ * and 'disks' parameters of this routine. The synchronous path
+ * requires a temporary result buffer and submit->scribble to be
+ * specified.
+ */
+struct dma_async_tx_descriptor *
+async_syndrome_val(struct page **blocks, unsigned int offset, int disks,
+ size_t len, enum sum_check_flags *pqres, struct page *spare,
+ struct async_submit_ctl *submit)
+{
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ_VAL,
+ NULL, 0, blocks, disks,
+ len);
+ struct dma_device *device = chan ? chan->device : NULL;
+ struct dma_async_tx_descriptor *tx;
+ enum dma_ctrl_flags dma_flags = submit->cb_fn ? DMA_PREP_INTERRUPT : 0;
+ dma_addr_t *dma_src = NULL;
+
+ BUG_ON(disks < 4);
+
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) blocks;
+
+ if (dma_src && device && disks <= dma_maxpq(device, 0) &&
+ is_dma_pq_aligned(device, offset, 0, len)) {
+ struct device *dev = device->dev;
+ dma_addr_t *pq = &dma_src[disks-2];
+ int i;
+
+ pr_debug("%s: (async) disks: %d len: %zu\n",
+ __func__, disks, len);
+ if (!P(blocks, disks))
+ dma_flags |= DMA_PREP_PQ_DISABLE_P;
+ if (!Q(blocks, disks))
+ dma_flags |= DMA_PREP_PQ_DISABLE_Q;
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+ for (i = 0; i < disks; i++)
+ if (likely(blocks[i])) {
+ BUG_ON(is_raid6_zero_block(blocks[i]));
+ dma_src[i] = dma_map_page(dev, blocks[i],
+ offset, len,
+ DMA_TO_DEVICE);
+ }
+
+ for (;;) {
+ tx = device->device_prep_dma_pq_val(chan, pq, dma_src,
+ disks - 2,
+ raid6_gfexp,
+ len, pqres,
+ dma_flags);
+ if (likely(tx))
+ break;
+ async_tx_quiesce(&submit->depend_tx);
+ dma_async_issue_pending(chan);
+ }
+ async_tx_submit(chan, tx, submit);
+
+ return tx;
+ } else {
+ struct page *p_src = P(blocks, disks);
+ struct page *q_src = Q(blocks, disks);
+ enum async_tx_flags flags_orig = submit->flags;
+ dma_async_tx_callback cb_fn_orig = submit->cb_fn;
+ void *scribble = submit->scribble;
+ void *cb_param_orig = submit->cb_param;
+ void *p, *q, *s;
+
+ pr_debug("%s: (sync) disks: %d len: %zu\n",
+ __func__, disks, len);
+
+ /* caller must provide a temporary result buffer and
+ * allow the input parameters to be preserved
+ */
+ BUG_ON(!spare || !scribble);
+
+ /* wait for any prerequisite operations */
+ async_tx_quiesce(&submit->depend_tx);
+
+ /* recompute p and/or q into the temporary buffer and then
+ * check to see the result matches the current value
+ */
+ tx = NULL;
+ *pqres = 0;
+ if (p_src) {
+ init_async_submit(submit, ASYNC_TX_XOR_ZERO_DST, NULL,
+ NULL, NULL, scribble);
+ tx = async_xor(spare, blocks, offset, disks-2, len, submit);
+ async_tx_quiesce(&tx);
+ p = page_address(p_src) + offset;
+ s = page_address(spare) + offset;
+ *pqres |= !!memcmp(p, s, len) << SUM_CHECK_P;
+ }
+
+ if (q_src) {
+ P(blocks, disks) = NULL;
+ Q(blocks, disks) = spare;
+ init_async_submit(submit, 0, NULL, NULL, NULL, scribble);
+ tx = async_gen_syndrome(blocks, offset, disks, len, submit);
+ async_tx_quiesce(&tx);
+ q = page_address(q_src) + offset;
+ s = page_address(spare) + offset;
+ *pqres |= !!memcmp(q, s, len) << SUM_CHECK_Q;
+ }
+
+ /* restore P, Q and submit */
+ P(blocks, disks) = p_src;
+ Q(blocks, disks) = q_src;
+
+ submit->cb_fn = cb_fn_orig;
+ submit->cb_param = cb_param_orig;
+ submit->flags = flags_orig;
+ async_tx_sync_epilog(submit);
+
+ return NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(async_syndrome_val);
+
+static int __init async_pq_init(void)
+{
+ scribble = alloc_page(GFP_KERNEL);
+
+ if (scribble)
+ return 0;
+
+ pr_err("%s: failed to allocate required spare page\n", __func__);
+
+ return -ENOMEM;
+}
+
+static void __exit async_pq_exit(void)
+{
+ put_page(scribble);
+}
+
+module_init(async_pq_init);
+module_exit(async_pq_exit);
+
+MODULE_DESCRIPTION("asynchronous raid6 syndrome generation/validation");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Asynchronous RAID-6 recovery calculations ASYNC_TX API.
+ * Copyright(c) 2009 Intel Corporation
+ *
+ * based on raid6recov.c:
+ * Copyright 2002 H. Peter Anvin
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/raid/pq.h>
+#include <linux/async_tx.h>
+
+static struct dma_async_tx_descriptor *
+async_sum_product(struct page *dest, struct page **srcs, unsigned char *coef,
+ size_t len, struct async_submit_ctl *submit)
+{
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ,
+ &dest, 1, srcs, 2, len);
+ struct dma_device *dma = chan ? chan->device : NULL;
+ const u8 *amul, *bmul;
+ u8 ax, bx;
+ u8 *a, *b, *c;
+
+ if (dma) {
+ dma_addr_t dma_dest[2];
+ dma_addr_t dma_src[2];
+ struct device *dev = dma->dev;
+ struct dma_async_tx_descriptor *tx;
+ enum dma_ctrl_flags dma_flags = DMA_PREP_PQ_DISABLE_P;
+
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+ dma_dest[1] = dma_map_page(dev, dest, 0, len, DMA_BIDIRECTIONAL);
+ dma_src[0] = dma_map_page(dev, srcs[0], 0, len, DMA_TO_DEVICE);
+ dma_src[1] = dma_map_page(dev, srcs[1], 0, len, DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_pq(chan, dma_dest, dma_src, 2, coef,
+ len, dma_flags);
+ if (tx) {
+ async_tx_submit(chan, tx, submit);
+ return tx;
+ }
+
+ /* could not get a descriptor, unmap and fall through to
+ * the synchronous path
+ */
+ dma_unmap_page(dev, dma_dest[1], len, DMA_BIDIRECTIONAL);
+ dma_unmap_page(dev, dma_src[0], len, DMA_TO_DEVICE);
+ dma_unmap_page(dev, dma_src[1], len, DMA_TO_DEVICE);
+ }
+
+ /* run the operation synchronously */
+ async_tx_quiesce(&submit->depend_tx);
+ amul = raid6_gfmul[coef[0]];
+ bmul = raid6_gfmul[coef[1]];
+ a = page_address(srcs[0]);
+ b = page_address(srcs[1]);
+ c = page_address(dest);
+
+ while (len--) {
+ ax = amul[*a++];
+ bx = bmul[*b++];
+ *c++ = ax ^ bx;
+ }
+
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *
+async_mult(struct page *dest, struct page *src, u8 coef, size_t len,
+ struct async_submit_ctl *submit)
+{
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ,
+ &dest, 1, &src, 1, len);
+ struct dma_device *dma = chan ? chan->device : NULL;
+ const u8 *qmul; /* Q multiplier table */
+ u8 *d, *s;
+
+ if (dma) {
+ dma_addr_t dma_dest[2];
+ dma_addr_t dma_src[1];
+ struct device *dev = dma->dev;
+ struct dma_async_tx_descriptor *tx;
+ enum dma_ctrl_flags dma_flags = DMA_PREP_PQ_DISABLE_P;
+
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+ dma_dest[1] = dma_map_page(dev, dest, 0, len, DMA_BIDIRECTIONAL);
+ dma_src[0] = dma_map_page(dev, src, 0, len, DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_pq(chan, dma_dest, dma_src, 1, &coef,
+ len, dma_flags);
+ if (tx) {
+ async_tx_submit(chan, tx, submit);
+ return tx;
+ }
+
+ /* could not get a descriptor, unmap and fall through to
+ * the synchronous path
+ */
+ dma_unmap_page(dev, dma_dest[1], len, DMA_BIDIRECTIONAL);
+ dma_unmap_page(dev, dma_src[0], len, DMA_TO_DEVICE);
+ }
+
+ /* no channel available, or failed to allocate a descriptor, so
+ * perform the operation synchronously
+ */
+ async_tx_quiesce(&submit->depend_tx);
+ qmul = raid6_gfmul[coef];
+ d = page_address(dest);
+ s = page_address(src);
+
+ while (len--)
+ *d++ = qmul[*s++];
+
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *
+__2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks,
+ struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *a, *b;
+ struct page *srcs[2];
+ unsigned char coef[2];
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+
+ p = blocks[4-2];
+ q = blocks[4-1];
+
+ a = blocks[faila];
+ b = blocks[failb];
+
+ /* in the 4 disk case P + Pxy == P and Q + Qxy == Q */
+ /* Dx = A*(P+Pxy) + B*(Q+Qxy) */
+ srcs[0] = p;
+ srcs[1] = q;
+ coef[0] = raid6_gfexi[failb-faila];
+ coef[1] = raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]];
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_sum_product(b, srcs, coef, bytes, submit);
+
+ /* Dy = P+Pxy+Dx */
+ srcs[0] = p;
+ srcs[1] = b;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_ZERO_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(a, srcs, 0, 2, bytes, submit);
+
+ return tx;
+
+}
+
+static struct dma_async_tx_descriptor *
+__2data_recov_5(size_t bytes, int faila, int failb, struct page **blocks,
+ struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *g, *dp, *dq;
+ struct page *srcs[2];
+ unsigned char coef[2];
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+ int uninitialized_var(good);
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ if (i == faila || i == failb)
+ continue;
+ else {
+ good = i;
+ break;
+ }
+ }
+ BUG_ON(i >= 3);
+
+ p = blocks[5-2];
+ q = blocks[5-1];
+ g = blocks[good];
+
+ /* Compute syndrome with zero for the missing data pages
+ * Use the dead data pages as temporary storage for delta p and
+ * delta q
+ */
+ dp = blocks[faila];
+ dq = blocks[failb];
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_memcpy(dp, g, 0, 0, bytes, submit);
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_mult(dq, g, raid6_gfexp[good], bytes, submit);
+
+ /* compute P + Pxy */
+ srcs[0] = dp;
+ srcs[1] = p;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ /* compute Q + Qxy */
+ srcs[0] = dq;
+ srcs[1] = q;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dq, srcs, 0, 2, bytes, submit);
+
+ /* Dx = A*(P+Pxy) + B*(Q+Qxy) */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ coef[0] = raid6_gfexi[failb-faila];
+ coef[1] = raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]];
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_sum_product(dq, srcs, coef, bytes, submit);
+
+ /* Dy = P+Pxy+Dx */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_DROP_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ return tx;
+}
+
+static struct dma_async_tx_descriptor *
+__2data_recov_n(int disks, size_t bytes, int faila, int failb,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *dp, *dq;
+ struct page *srcs[2];
+ unsigned char coef[2];
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+
+ p = blocks[disks-2];
+ q = blocks[disks-1];
+
+ /* Compute syndrome with zero for the missing data pages
+ * Use the dead data pages as temporary storage for
+ * delta p and delta q
+ */
+ dp = blocks[faila];
+ blocks[faila] = (void *)raid6_empty_zero_page;
+ blocks[disks-2] = dp;
+ dq = blocks[failb];
+ blocks[failb] = (void *)raid6_empty_zero_page;
+ blocks[disks-1] = dq;
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_gen_syndrome(blocks, 0, disks, bytes, submit);
+
+ /* Restore pointer table */
+ blocks[faila] = dp;
+ blocks[failb] = dq;
+ blocks[disks-2] = p;
+ blocks[disks-1] = q;
+
+ /* compute P + Pxy */
+ srcs[0] = dp;
+ srcs[1] = p;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ /* compute Q + Qxy */
+ srcs[0] = dq;
+ srcs[1] = q;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dq, srcs, 0, 2, bytes, submit);
+
+ /* Dx = A*(P+Pxy) + B*(Q+Qxy) */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ coef[0] = raid6_gfexi[failb-faila];
+ coef[1] = raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]];
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_sum_product(dq, srcs, coef, bytes, submit);
+
+ /* Dy = P+Pxy+Dx */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_DROP_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ return tx;
+}
+
+/**
+ * async_raid6_2data_recov - asynchronously calculate two missing data blocks
+ * @disks: number of disks in the RAID-6 array
+ * @bytes: block size
+ * @faila: first failed drive index
+ * @failb: second failed drive index
+ * @blocks: array of source pointers where the last two entries are p and q
+ * @submit: submission/completion modifiers
+ */
+struct dma_async_tx_descriptor *
+async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ BUG_ON(faila == failb);
+ if (failb < faila)
+ swap(faila, failb);
+
+ pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
+
+ /* we need to preserve the contents of 'blocks' for the async
+ * case, so punt to synchronous if a scribble buffer is not available
+ */
+ if (!submit->scribble) {
+ void **ptrs = (void **) blocks;
+ int i;
+
+ async_tx_quiesce(&submit->depend_tx);
+ for (i = 0; i < disks; i++)
+ ptrs[i] = page_address(blocks[i]);
+
+ raid6_2data_recov(disks, bytes, faila, failb, ptrs);
+
+ async_tx_sync_epilog(submit);
+
+ return NULL;
+ }
+
+ switch (disks) {
+ case 4:
+ /* dma devices do not uniformly understand a zero source pq
+ * operation (in contrast to the synchronous case), so
+ * explicitly handle the 4 disk special case
+ */
+ return __2data_recov_4(bytes, faila, failb, blocks, submit);
+ case 5:
+ /* dma devices do not uniformly understand a single
+ * source pq operation (in contrast to the synchronous
+ * case), so explicitly handle the 5 disk special case
+ */
+ return __2data_recov_5(bytes, faila, failb, blocks, submit);
+ default:
+ return __2data_recov_n(disks, bytes, faila, failb, blocks, submit);
+ }
+}
+EXPORT_SYMBOL_GPL(async_raid6_2data_recov);
+
+/**
+ * async_raid6_datap_recov - asynchronously calculate a data and the 'p' block
+ * @disks: number of disks in the RAID-6 array
+ * @bytes: block size
+ * @faila: failed drive index
+ * @blocks: array of source pointers where the last two entries are p and q
+ * @submit: submission/completion modifiers
+ */
+struct dma_async_tx_descriptor *
+async_raid6_datap_recov(int disks, size_t bytes, int faila,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *dq;
+ u8 coef;
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+ struct page *srcs[2];
+
+ pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
+
+ /* we need to preserve the contents of 'blocks' for the async
+ * case, so punt to synchronous if a scribble buffer is not available
+ */
+ if (!scribble) {
+ void **ptrs = (void **) blocks;
+ int i;
+
+ async_tx_quiesce(&submit->depend_tx);
+ for (i = 0; i < disks; i++)
+ ptrs[i] = page_address(blocks[i]);
+
+ raid6_datap_recov(disks, bytes, faila, ptrs);
+
+ async_tx_sync_epilog(submit);
+
+ return NULL;
+ }
+
+ p = blocks[disks-2];
+ q = blocks[disks-1];
+
+ /* Compute syndrome with zero for the missing data page
+ * Use the dead data page as temporary storage for delta q
+ */
+ dq = blocks[faila];
+ blocks[faila] = (void *)raid6_empty_zero_page;
+ blocks[disks-1] = dq;
+
+ /* in the 4 disk case we only need to perform a single source
+ * multiplication
+ */
+ if (disks == 4) {
+ int good = faila == 0 ? 1 : 0;
+ struct page *g = blocks[good];
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL,
+ scribble);
+ tx = async_memcpy(p, g, 0, 0, bytes, submit);
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL,
+ scribble);
+ tx = async_mult(dq, g, raid6_gfexp[good], bytes, submit);
+ } else {
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL,
+ scribble);
+ tx = async_gen_syndrome(blocks, 0, disks, bytes, submit);
+ }
+
+ /* Restore pointer table */
+ blocks[faila] = dq;
+ blocks[disks-1] = q;
+
+ /* calculate g^{-faila} */
+ coef = raid6_gfinv[raid6_gfexp[faila]];
+
+ srcs[0] = dq;
+ srcs[1] = q;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dq, srcs, 0, 2, bytes, submit);
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_mult(dq, dq, coef, bytes, submit);
+
+ srcs[0] = p;
+ srcs[1] = dq;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_DROP_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(p, srcs, 0, 2, bytes, submit);
+
+ return tx;
+}
+EXPORT_SYMBOL_GPL(async_raid6_datap_recov);
+
+MODULE_AUTHOR("Dan Williams <dan.j.williams@intel.com>");
+MODULE_DESCRIPTION("asynchronous RAID-6 recovery api");
+MODULE_LICENSE("GPL");
async_dmaengine_put();
}
+module_init(async_tx_init);
+module_exit(async_tx_exit);
+
/**
* __async_tx_find_channel - find a channel to carry out the operation or let
* the transaction execute synchronously
- * @depend_tx: transaction dependency
+ * @submit: transaction dependency and submission modifiers
* @tx_type: transaction type
*/
struct dma_chan *
-__async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
- enum dma_transaction_type tx_type)
+__async_tx_find_channel(struct async_submit_ctl *submit,
+ enum dma_transaction_type tx_type)
{
+ struct dma_async_tx_descriptor *depend_tx = submit->depend_tx;
+
/* see if we can keep the chain on one channel */
if (depend_tx &&
dma_has_cap(tx_type, depend_tx->chan->device->cap_mask))
return async_dma_find_channel(tx_type);
}
EXPORT_SYMBOL_GPL(__async_tx_find_channel);
-#else
-static int __init async_tx_init(void)
-{
- printk(KERN_INFO "async_tx: api initialized (sync-only)\n");
- return 0;
-}
-
-static void __exit async_tx_exit(void)
-{
- do { } while (0);
-}
#endif
async_tx_channel_switch(struct dma_async_tx_descriptor *depend_tx,
struct dma_async_tx_descriptor *tx)
{
- struct dma_chan *chan;
- struct dma_device *device;
+ struct dma_chan *chan = depend_tx->chan;
+ struct dma_device *device = chan->device;
struct dma_async_tx_descriptor *intr_tx = (void *) ~0;
+ #ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+ BUG();
+ #endif
+
/* first check to see if we can still append to depend_tx */
spin_lock_bh(&depend_tx->lock);
if (depend_tx->parent && depend_tx->chan == tx->chan) {
}
spin_unlock_bh(&depend_tx->lock);
- if (!intr_tx)
+ /* attached dependency, flush the parent channel */
+ if (!intr_tx) {
+ device->device_issue_pending(chan);
return;
-
- chan = depend_tx->chan;
- device = chan->device;
+ }
/* see if we can schedule an interrupt
* otherwise poll for completion
intr_tx->tx_submit(intr_tx);
async_tx_ack(intr_tx);
}
+ device->device_issue_pending(chan);
} else {
if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for depend_tx\n",
/**
- * submit_disposition - while holding depend_tx->lock we must avoid submitting
- * new operations to prevent a circular locking dependency with
- * drivers that already hold a channel lock when calling
- * async_tx_run_dependencies.
+ * submit_disposition - flags for routing an incoming operation
* @ASYNC_TX_SUBMITTED: we were able to append the new operation under the lock
* @ASYNC_TX_CHANNEL_SWITCH: when the lock is dropped schedule a channel switch
* @ASYNC_TX_DIRECT_SUBMIT: when the lock is dropped submit directly
+ *
+ * while holding depend_tx->lock we must avoid submitting new operations
+ * to prevent a circular locking dependency with drivers that already
+ * hold a channel lock when calling async_tx_run_dependencies.
*/
enum submit_disposition {
ASYNC_TX_SUBMITTED,
void
async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
- enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ struct async_submit_ctl *submit)
{
- tx->callback = cb_fn;
- tx->callback_param = cb_param;
+ struct dma_async_tx_descriptor *depend_tx = submit->depend_tx;
+
+ tx->callback = submit->cb_fn;
+ tx->callback_param = submit->cb_param;
if (depend_tx) {
enum submit_disposition s;
tx->tx_submit(tx);
}
- if (flags & ASYNC_TX_ACK)
+ if (submit->flags & ASYNC_TX_ACK)
async_tx_ack(tx);
- if (depend_tx && (flags & ASYNC_TX_DEP_ACK))
+ if (depend_tx)
async_tx_ack(depend_tx);
}
EXPORT_SYMBOL_GPL(async_tx_submit);
/**
- * async_trigger_callback - schedules the callback function to be run after
- * any dependent operations have been completed.
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: 'callback' requires the completion of this transaction
- * @cb_fn: function to call after depend_tx completes
- * @cb_param: parameter to pass to the callback routine
+ * async_trigger_callback - schedules the callback function to be run
+ * @submit: submission and completion parameters
+ *
+ * honored flags: ASYNC_TX_ACK
+ *
+ * The callback is run after any dependent operations have completed.
*/
struct dma_async_tx_descriptor *
-async_trigger_callback(enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+async_trigger_callback(struct async_submit_ctl *submit)
{
struct dma_chan *chan;
struct dma_device *device;
struct dma_async_tx_descriptor *tx;
+ struct dma_async_tx_descriptor *depend_tx = submit->depend_tx;
if (depend_tx) {
chan = depend_tx->chan;
if (tx) {
pr_debug("%s: (async)\n", __func__);
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else {
pr_debug("%s: (sync)\n", __func__);
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
return tx;
}
EXPORT_SYMBOL_GPL(async_tx_quiesce);
-module_init(async_tx_init);
-module_exit(async_tx_exit);
-
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("Asynchronous Bulk Memory Transactions API");
MODULE_LICENSE("GPL");
/* do_async_xor - dma map the pages and perform the xor with an engine */
static __async_inline struct dma_async_tx_descriptor *
do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
- unsigned int offset, int src_cnt, size_t len,
- enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ unsigned int offset, int src_cnt, size_t len, dma_addr_t *dma_src,
+ struct async_submit_ctl *submit)
{
struct dma_device *dma = chan->device;
- dma_addr_t *dma_src = (dma_addr_t *) src_list;
struct dma_async_tx_descriptor *tx = NULL;
int src_off = 0;
int i;
- dma_async_tx_callback _cb_fn;
- void *_cb_param;
- enum async_tx_flags async_flags;
+ dma_async_tx_callback cb_fn_orig = submit->cb_fn;
+ void *cb_param_orig = submit->cb_param;
+ enum async_tx_flags flags_orig = submit->flags;
enum dma_ctrl_flags dma_flags;
int xor_src_cnt;
dma_addr_t dma_dest;
}
while (src_cnt) {
- async_flags = flags;
+ submit->flags = flags_orig;
dma_flags = 0;
- xor_src_cnt = min(src_cnt, dma->max_xor);
+ xor_src_cnt = min(src_cnt, (int)dma->max_xor);
/* if we are submitting additional xors, leave the chain open,
* clear the callback parameters, and leave the destination
* buffer mapped
*/
if (src_cnt > xor_src_cnt) {
- async_flags &= ~ASYNC_TX_ACK;
+ submit->flags &= ~ASYNC_TX_ACK;
+ submit->flags |= ASYNC_TX_FENCE;
dma_flags = DMA_COMPL_SKIP_DEST_UNMAP;
- _cb_fn = NULL;
- _cb_param = NULL;
+ submit->cb_fn = NULL;
+ submit->cb_param = NULL;
} else {
- _cb_fn = cb_fn;
- _cb_param = cb_param;
+ submit->cb_fn = cb_fn_orig;
+ submit->cb_param = cb_param_orig;
}
- if (_cb_fn)
+ if (submit->cb_fn)
dma_flags |= DMA_PREP_INTERRUPT;
-
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
/* Since we have clobbered the src_list we are committed
* to doing this asynchronously. Drivers force forward progress
* in case they can not provide a descriptor
xor_src_cnt, len, dma_flags);
if (unlikely(!tx))
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
/* spin wait for the preceeding transactions to complete */
while (unlikely(!tx)) {
dma_flags);
}
- async_tx_submit(chan, tx, async_flags, depend_tx, _cb_fn,
- _cb_param);
-
- depend_tx = tx;
- flags |= ASYNC_TX_DEP_ACK;
+ async_tx_submit(chan, tx, submit);
+ submit->depend_tx = tx;
if (src_cnt > xor_src_cnt) {
/* drop completed sources */
static void
do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
- int src_cnt, size_t len, enum async_tx_flags flags,
- dma_async_tx_callback cb_fn, void *cb_param)
+ int src_cnt, size_t len, struct async_submit_ctl *submit)
{
int i;
int xor_src_cnt;
int src_off = 0;
void *dest_buf;
- void **srcs = (void **) src_list;
+ void **srcs;
+
+ if (submit->scribble)
+ srcs = submit->scribble;
+ else
+ srcs = (void **) src_list;
- /* reuse the 'src_list' array to convert to buffer pointers */
+ /* convert to buffer pointers */
for (i = 0; i < src_cnt; i++)
srcs[i] = page_address(src_list[i]) + offset;
/* set destination address */
dest_buf = page_address(dest) + offset;
- if (flags & ASYNC_TX_XOR_ZERO_DST)
+ if (submit->flags & ASYNC_TX_XOR_ZERO_DST)
memset(dest_buf, 0, len);
while (src_cnt > 0) {
src_off += xor_src_cnt;
}
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
/**
* async_xor - attempt to xor a set of blocks with a dma engine.
- * xor_blocks always uses the dest as a source so the ASYNC_TX_XOR_ZERO_DST
- * flag must be set to not include dest data in the calculation. The
- * assumption with dma eninges is that they only use the destination
- * buffer as a source when it is explicity specified in the source list.
* @dest: destination page
- * @src_list: array of source pages (if the dest is also a source it must be
- * at index zero). The contents of this array may be overwritten.
- * @offset: offset in pages to start transaction
+ * @src_list: array of source pages
+ * @offset: common src/dst offset to start transaction
* @src_cnt: number of source pages
* @len: length in bytes
- * @flags: ASYNC_TX_XOR_ZERO_DST, ASYNC_TX_XOR_DROP_DEST,
- * ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: xor depends on the result of this transaction.
- * @cb_fn: function to call when the xor completes
- * @cb_param: parameter to pass to the callback routine
+ * @submit: submission / completion modifiers
+ *
+ * honored flags: ASYNC_TX_ACK, ASYNC_TX_XOR_ZERO_DST, ASYNC_TX_XOR_DROP_DST
+ *
+ * xor_blocks always uses the dest as a source so the
+ * ASYNC_TX_XOR_ZERO_DST flag must be set to not include dest data in
+ * the calculation. The assumption with dma eninges is that they only
+ * use the destination buffer as a source when it is explicity specified
+ * in the source list.
+ *
+ * src_list note: if the dest is also a source it must be at index zero.
+ * The contents of this array will be overwritten if a scribble region
+ * is not specified.
*/
struct dma_async_tx_descriptor *
async_xor(struct page *dest, struct page **src_list, unsigned int offset,
- int src_cnt, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ int src_cnt, size_t len, struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_XOR,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_XOR,
&dest, 1, src_list,
src_cnt, len);
+ dma_addr_t *dma_src = NULL;
+
BUG_ON(src_cnt <= 1);
- if (chan) {
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) src_list;
+
+ if (dma_src && chan && is_dma_xor_aligned(chan->device, offset, 0, len)) {
/* run the xor asynchronously */
pr_debug("%s (async): len: %zu\n", __func__, len);
return do_async_xor(chan, dest, src_list, offset, src_cnt, len,
- flags, depend_tx, cb_fn, cb_param);
+ dma_src, submit);
} else {
/* run the xor synchronously */
pr_debug("%s (sync): len: %zu\n", __func__, len);
+ WARN_ONCE(chan, "%s: no space for dma address conversion\n",
+ __func__);
/* in the sync case the dest is an implied source
* (assumes the dest is the first source)
*/
- if (flags & ASYNC_TX_XOR_DROP_DST) {
+ if (submit->flags & ASYNC_TX_XOR_DROP_DST) {
src_cnt--;
src_list++;
}
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
- do_sync_xor(dest, src_list, offset, src_cnt, len,
- flags, cb_fn, cb_param);
+ do_sync_xor(dest, src_list, offset, src_cnt, len, submit);
return NULL;
}
}
/**
- * async_xor_zero_sum - attempt a xor parity check with a dma engine.
+ * async_xor_val - attempt a xor parity check with a dma engine.
* @dest: destination page used if the xor is performed synchronously
- * @src_list: array of source pages. The dest page must be listed as a source
- * at index zero. The contents of this array may be overwritten.
+ * @src_list: array of source pages
* @offset: offset in pages to start transaction
* @src_cnt: number of source pages
* @len: length in bytes
* @result: 0 if sum == 0 else non-zero
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: xor depends on the result of this transaction.
- * @cb_fn: function to call when the xor completes
- * @cb_param: parameter to pass to the callback routine
+ * @submit: submission / completion modifiers
+ *
+ * honored flags: ASYNC_TX_ACK
+ *
+ * src_list note: if the dest is also a source it must be at index zero.
+ * The contents of this array will be overwritten if a scribble region
+ * is not specified.
*/
struct dma_async_tx_descriptor *
-async_xor_zero_sum(struct page *dest, struct page **src_list,
- unsigned int offset, int src_cnt, size_t len,
- u32 *result, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+async_xor_val(struct page *dest, struct page **src_list, unsigned int offset,
+ int src_cnt, size_t len, enum sum_check_flags *result,
+ struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_ZERO_SUM,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_XOR_VAL,
&dest, 1, src_list,
src_cnt, len);
struct dma_device *device = chan ? chan->device : NULL;
struct dma_async_tx_descriptor *tx = NULL;
+ dma_addr_t *dma_src = NULL;
BUG_ON(src_cnt <= 1);
- if (device && src_cnt <= device->max_xor) {
- dma_addr_t *dma_src = (dma_addr_t *) src_list;
- unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) src_list;
+
+ if (dma_src && device && src_cnt <= device->max_xor &&
+ is_dma_xor_aligned(device, offset, 0, len)) {
+ unsigned long dma_prep_flags = 0;
int i;
pr_debug("%s: (async) len: %zu\n", __func__, len);
+ if (submit->cb_fn)
+ dma_prep_flags |= DMA_PREP_INTERRUPT;
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_prep_flags |= DMA_PREP_FENCE;
for (i = 0; i < src_cnt; i++)
dma_src[i] = dma_map_page(device->dev, src_list[i],
offset, len, DMA_TO_DEVICE);
- tx = device->device_prep_dma_zero_sum(chan, dma_src, src_cnt,
- len, result,
- dma_prep_flags);
+ tx = device->device_prep_dma_xor_val(chan, dma_src, src_cnt,
+ len, result,
+ dma_prep_flags);
if (unlikely(!tx)) {
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
while (!tx) {
dma_async_issue_pending(chan);
- tx = device->device_prep_dma_zero_sum(chan,
+ tx = device->device_prep_dma_xor_val(chan,
dma_src, src_cnt, len, result,
dma_prep_flags);
}
}
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else {
- unsigned long xor_flags = flags;
+ enum async_tx_flags flags_orig = submit->flags;
pr_debug("%s: (sync) len: %zu\n", __func__, len);
+ WARN_ONCE(device && src_cnt <= device->max_xor,
+ "%s: no space for dma address conversion\n",
+ __func__);
- xor_flags |= ASYNC_TX_XOR_DROP_DST;
- xor_flags &= ~ASYNC_TX_ACK;
+ submit->flags |= ASYNC_TX_XOR_DROP_DST;
+ submit->flags &= ~ASYNC_TX_ACK;
- tx = async_xor(dest, src_list, offset, src_cnt, len, xor_flags,
- depend_tx, NULL, NULL);
+ tx = async_xor(dest, src_list, offset, src_cnt, len, submit);
async_tx_quiesce(&tx);
- *result = page_is_zero(dest, offset, len) ? 0 : 1;
+ *result = !page_is_zero(dest, offset, len) << SUM_CHECK_P;
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
+ submit->flags = flags_orig;
}
return tx;
}
-EXPORT_SYMBOL_GPL(async_xor_zero_sum);
-
-static int __init async_xor_init(void)
-{
- #ifdef CONFIG_ASYNC_TX_DMA
- /* To conserve stack space the input src_list (array of page pointers)
- * is reused to hold the array of dma addresses passed to the driver.
- * This conversion is only possible when dma_addr_t is less than the
- * the size of a pointer. HIGHMEM64G is known to violate this
- * assumption.
- */
- BUILD_BUG_ON(sizeof(dma_addr_t) > sizeof(struct page *));
- #endif
-
- return 0;
-}
-
-static void __exit async_xor_exit(void)
-{
- do { } while (0);
-}
-
-module_init(async_xor_init);
-module_exit(async_xor_exit);
+EXPORT_SYMBOL_GPL(async_xor_val);
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("asynchronous xor/xor-zero-sum api");
--- /dev/null
+/*
+ * asynchronous raid6 recovery self test
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * based on drivers/md/raid6test/test.c:
+ * Copyright 2002-2007 H. Peter Anvin
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/async_tx.h>
+#include <linux/random.h>
+
+#undef pr
+#define pr(fmt, args...) pr_info("raid6test: " fmt, ##args)
+
+#define NDISKS 16 /* Including P and Q */
+
+static struct page *dataptrs[NDISKS];
+static addr_conv_t addr_conv[NDISKS];
+static struct page *data[NDISKS+3];
+static struct page *spare;
+static struct page *recovi;
+static struct page *recovj;
+
+static void callback(void *param)
+{
+ struct completion *cmp = param;
+
+ complete(cmp);
+}
+
+static void makedata(int disks)
+{
+ int i, j;
+
+ for (i = 0; i < disks; i++) {
+ for (j = 0; j < PAGE_SIZE/sizeof(u32); j += sizeof(u32)) {
+ u32 *p = page_address(data[i]) + j;
+
+ *p = random32();
+ }
+
+ dataptrs[i] = data[i];
+ }
+}
+
+static char disk_type(int d, int disks)
+{
+ if (d == disks - 2)
+ return 'P';
+ else if (d == disks - 1)
+ return 'Q';
+ else
+ return 'D';
+}
+
+/* Recover two failed blocks. */
+static void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, struct page **ptrs)
+{
+ struct async_submit_ctl submit;
+ struct completion cmp;
+ struct dma_async_tx_descriptor *tx = NULL;
+ enum sum_check_flags result = ~0;
+
+ if (faila > failb)
+ swap(faila, failb);
+
+ if (failb == disks-1) {
+ if (faila == disks-2) {
+ /* P+Q failure. Just rebuild the syndrome. */
+ init_async_submit(&submit, 0, NULL, NULL, NULL, addr_conv);
+ tx = async_gen_syndrome(ptrs, 0, disks, bytes, &submit);
+ } else {
+ struct page *blocks[disks];
+ struct page *dest;
+ int count = 0;
+ int i;
+
+ /* data+Q failure. Reconstruct data from P,
+ * then rebuild syndrome
+ */
+ for (i = disks; i-- ; ) {
+ if (i == faila || i == failb)
+ continue;
+ blocks[count++] = ptrs[i];
+ }
+ dest = ptrs[faila];
+ init_async_submit(&submit, ASYNC_TX_XOR_ZERO_DST, NULL,
+ NULL, NULL, addr_conv);
+ tx = async_xor(dest, blocks, 0, count, bytes, &submit);
+
+ init_async_submit(&submit, 0, tx, NULL, NULL, addr_conv);
+ tx = async_gen_syndrome(ptrs, 0, disks, bytes, &submit);
+ }
+ } else {
+ if (failb == disks-2) {
+ /* data+P failure. */
+ init_async_submit(&submit, 0, NULL, NULL, NULL, addr_conv);
+ tx = async_raid6_datap_recov(disks, bytes, faila, ptrs, &submit);
+ } else {
+ /* data+data failure. */
+ init_async_submit(&submit, 0, NULL, NULL, NULL, addr_conv);
+ tx = async_raid6_2data_recov(disks, bytes, faila, failb, ptrs, &submit);
+ }
+ }
+ init_completion(&cmp);
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, callback, &cmp, addr_conv);
+ tx = async_syndrome_val(ptrs, 0, disks, bytes, &result, spare, &submit);
+ async_tx_issue_pending(tx);
+
+ if (wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000)) == 0)
+ pr("%s: timeout! (faila: %d failb: %d disks: %d)\n",
+ __func__, faila, failb, disks);
+
+ if (result != 0)
+ pr("%s: validation failure! faila: %d failb: %d sum_check_flags: %x\n",
+ __func__, faila, failb, result);
+}
+
+static int test_disks(int i, int j, int disks)
+{
+ int erra, errb;
+
+ memset(page_address(recovi), 0xf0, PAGE_SIZE);
+ memset(page_address(recovj), 0xba, PAGE_SIZE);
+
+ dataptrs[i] = recovi;
+ dataptrs[j] = recovj;
+
+ raid6_dual_recov(disks, PAGE_SIZE, i, j, dataptrs);
+
+ erra = memcmp(page_address(data[i]), page_address(recovi), PAGE_SIZE);
+ errb = memcmp(page_address(data[j]), page_address(recovj), PAGE_SIZE);
+
+ pr("%s(%d, %d): faila=%3d(%c) failb=%3d(%c) %s\n",
+ __func__, i, j, i, disk_type(i, disks), j, disk_type(j, disks),
+ (!erra && !errb) ? "OK" : !erra ? "ERRB" : !errb ? "ERRA" : "ERRAB");
+
+ dataptrs[i] = data[i];
+ dataptrs[j] = data[j];
+
+ return erra || errb;
+}
+
+static int test(int disks, int *tests)
+{
+ struct dma_async_tx_descriptor *tx;
+ struct async_submit_ctl submit;
+ struct completion cmp;
+ int err = 0;
+ int i, j;
+
+ recovi = data[disks];
+ recovj = data[disks+1];
+ spare = data[disks+2];
+
+ makedata(disks);
+
+ /* Nuke syndromes */
+ memset(page_address(data[disks-2]), 0xee, PAGE_SIZE);
+ memset(page_address(data[disks-1]), 0xee, PAGE_SIZE);
+
+ /* Generate assumed good syndrome */
+ init_completion(&cmp);
+ init_async_submit(&submit, ASYNC_TX_ACK, NULL, callback, &cmp, addr_conv);
+ tx = async_gen_syndrome(dataptrs, 0, disks, PAGE_SIZE, &submit);
+ async_tx_issue_pending(tx);
+
+ if (wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000)) == 0) {
+ pr("error: initial gen_syndrome(%d) timed out\n", disks);
+ return 1;
+ }
+
+ pr("testing the %d-disk case...\n", disks);
+ for (i = 0; i < disks-1; i++)
+ for (j = i+1; j < disks; j++) {
+ (*tests)++;
+ err += test_disks(i, j, disks);
+ }
+
+ return err;
+}
+
+
+static int raid6_test(void)
+{
+ int err = 0;
+ int tests = 0;
+ int i;
+
+ for (i = 0; i < NDISKS+3; i++) {
+ data[i] = alloc_page(GFP_KERNEL);
+ if (!data[i]) {
+ while (i--)
+ put_page(data[i]);
+ return -ENOMEM;
+ }
+ }
+
+ /* the 4-disk and 5-disk cases are special for the recovery code */
+ if (NDISKS > 4)
+ err += test(4, &tests);
+ if (NDISKS > 5)
+ err += test(5, &tests);
+ err += test(NDISKS, &tests);
+
+ pr("\n");
+ pr("complete (%d tests, %d failure%s)\n",
+ tests, err, err == 1 ? "" : "s");
+
+ for (i = 0; i < NDISKS+3; i++)
+ put_page(data[i]);
+
+ return 0;
+}
+
+static void raid6_test_exit(void)
+{
+}
+
+/* when compiled-in wait for drivers to load first (assumes dma drivers
+ * are also compliled-in)
+ */
+late_initcall(raid6_test);
+module_exit(raid6_test_exit);
+MODULE_AUTHOR("Dan Williams <dan.j.williams@intel.com>");
+MODULE_DESCRIPTION("asynchronous RAID-6 recovery self tests");
+MODULE_LICENSE("GPL");
EXPORT_SYMBOL(acpi_bus_get_device);
-int acpi_bus_get_status(struct acpi_device *device)
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+ unsigned long long *sta)
{
- acpi_status status = AE_OK;
- unsigned long long sta = 0;
-
+ acpi_status status;
- if (!device)
- return -EINVAL;
+ status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
+ if (ACPI_SUCCESS(status))
+ return AE_OK;
- /*
- * Evaluate _STA if present.
- */
- if (device->flags.dynamic_status) {
- status =
- acpi_evaluate_integer(device->handle, "_STA", NULL, &sta);
- if (ACPI_FAILURE(status))
- return -ENODEV;
- STRUCT_TO_INT(device->status) = (int)sta;
+ if (status == AE_NOT_FOUND) {
+ *sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
+ return AE_OK;
}
+ return status;
+}
- /*
- * According to ACPI spec some device can be present and functional
- * even if the parent is not present but functional.
- * In such conditions the child device should not inherit the status
- * from the parent.
- */
- else
- STRUCT_TO_INT(device->status) =
- ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
- ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
+int acpi_bus_get_status(struct acpi_device *device)
+{
+ acpi_status status;
+ unsigned long long sta;
+
+ status = acpi_bus_get_status_handle(device->handle, &sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ STRUCT_TO_INT(device->status) = (int) sta;
if (device->status.functional && !device->status.present) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
device->pnp.bus_id,
(u32) STRUCT_TO_INT(device->status)));
-
return 0;
}
-
EXPORT_SYMBOL(acpi_bus_get_status);
void acpi_bus_private_data_handler(acpi_handle handle,
.release = single_release,
};
+static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
+static struct acpi_device *lid_device;
+
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
+int acpi_lid_notifier_register(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
+}
+EXPORT_SYMBOL(acpi_lid_notifier_register);
+
+int acpi_lid_notifier_unregister(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
+}
+EXPORT_SYMBOL(acpi_lid_notifier_unregister);
+
+int acpi_lid_open(void)
+{
+ acpi_status status;
+ unsigned long long state;
+
+ status = acpi_evaluate_integer(lid_device->handle, "_LID", NULL,
+ &state);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ return !!state;
+}
+EXPORT_SYMBOL(acpi_lid_open);
+
static int acpi_lid_send_state(struct acpi_device *device)
{
struct acpi_button *button = acpi_driver_data(device);
unsigned long long state;
acpi_status status;
+ int ret;
status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
if (ACPI_FAILURE(status))
/* input layer checks if event is redundant */
input_report_switch(button->input, SW_LID, !state);
input_sync(button->input);
- return 0;
+
+ ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
+ if (ret == NOTIFY_DONE)
+ ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
+ device);
+ return ret;
}
static void acpi_button_notify(struct acpi_device *device, u32 event)
error = input_register_device(input);
if (error)
goto err_remove_fs;
- if (button->type == ACPI_BUTTON_TYPE_LID)
+ if (button->type == ACPI_BUTTON_TYPE_LID) {
acpi_lid_send_state(device);
+ /*
+ * This assumes there's only one lid device, or if there are
+ * more we only care about the last one...
+ */
+ lid_device = device;
+ }
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
static void bind_to_cpu0(struct work_struct *work)
{
- set_cpus_allowed(current, cpumask_of_cpu(0));
+ set_cpus_allowed_ptr(current, cpumask_of(0));
kfree(work);
}
struct acpi_processor *match_pr;
struct acpi_psd_package *match_pdomain;
- if (!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
return -ENOMEM;
mutex_lock(&performance_mutex);
* Now that we have _PSD data from all CPUs, lets setup P-state
* domain info.
*/
- cpumask_clear(covered_cpus);
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
struct acpi_tsd_package *pdomain, *match_pdomain;
struct acpi_processor_throttling *pthrottling, *match_pthrottling;
- if (!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
return -ENOMEM;
/*
if (retval)
goto err_ret;
- cpumask_clear(covered_cpus);
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
#define ACPI_BUS_HID "LNXSYBUS"
#define ACPI_BUS_DEVICE_NAME "System Bus"
+#define ACPI_IS_ROOT_DEVICE(device) (!(device)->parent)
+
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
DEFINE_MUTEX(acpi_device_lock);
{
int len;
int count;
-
- if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids)
- return -ENODEV;
+ struct acpi_hardware_id *id;
len = snprintf(modalias, size, "acpi:");
size -= len;
- if (acpi_dev->flags.hardware_id) {
- count = snprintf(&modalias[len], size, "%s:",
- acpi_dev->pnp.hardware_id);
+ list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
+ count = snprintf(&modalias[len], size, "%s:", id->id);
if (count < 0 || count >= size)
return -EINVAL;
len += count;
size -= count;
}
- if (acpi_dev->flags.compatible_ids) {
- struct acpica_device_id_list *cid_list;
- int i;
-
- cid_list = acpi_dev->pnp.cid_list;
- for (i = 0; i < cid_list->count; i++) {
- count = snprintf(&modalias[len], size, "%s:",
- cid_list->ids[i].string);
- if (count < 0 || count >= size) {
- printk(KERN_ERR PREFIX "%s cid[%i] exceeds event buffer size",
- acpi_dev->pnp.device_name, i);
- break;
- }
- len += count;
- size -= count;
- }
- }
-
modalias[len] = '\0';
return len;
}
acpi_device_hid_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
- return sprintf(buf, "%s\n", acpi_dev->pnp.hardware_id);
+ return sprintf(buf, "%s\n", acpi_device_hid(acpi_dev));
}
static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
goto end;
}
- if (dev->flags.hardware_id) {
- result = device_create_file(&dev->dev, &dev_attr_hid);
- if (result)
- goto end;
- }
+ result = device_create_file(&dev->dev, &dev_attr_hid);
+ if (result)
+ goto end;
- if (dev->flags.hardware_id || dev->flags.compatible_ids) {
- result = device_create_file(&dev->dev, &dev_attr_modalias);
- if (result)
- goto end;
- }
+ result = device_create_file(&dev->dev, &dev_attr_modalias);
+ if (result)
+ goto end;
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_eject);
- if (dev->flags.hardware_id || dev->flags.compatible_ids)
- device_remove_file(&dev->dev, &dev_attr_modalias);
-
- if (dev->flags.hardware_id)
- device_remove_file(&dev->dev, &dev_attr_hid);
+ device_remove_file(&dev->dev, &dev_attr_modalias);
+ device_remove_file(&dev->dev, &dev_attr_hid);
if (dev->handle)
device_remove_file(&dev->dev, &dev_attr_path);
}
const struct acpi_device_id *ids)
{
const struct acpi_device_id *id;
+ struct acpi_hardware_id *hwid;
/*
* If the device is not present, it is unnecessary to load device
if (!device->status.present)
return -ENODEV;
- if (device->flags.hardware_id) {
- for (id = ids; id->id[0]; id++) {
- if (!strcmp((char*)id->id, device->pnp.hardware_id))
+ for (id = ids; id->id[0]; id++)
+ list_for_each_entry(hwid, &device->pnp.ids, list)
+ if (!strcmp((char *) id->id, hwid->id))
return 0;
- }
- }
-
- if (device->flags.compatible_ids) {
- struct acpica_device_id_list *cid_list = device->pnp.cid_list;
- int i;
-
- for (id = ids; id->id[0]; id++) {
- /* compare multiple _CID entries against driver ids */
- for (i = 0; i < cid_list->count; i++) {
- if (!strcmp((char*)id->id,
- cid_list->ids[i].string))
- return 0;
- }
- }
- }
return -ENOENT;
}
EXPORT_SYMBOL(acpi_match_device_ids);
+static void acpi_free_ids(struct acpi_device *device)
+{
+ struct acpi_hardware_id *id, *tmp;
+
+ list_for_each_entry_safe(id, tmp, &device->pnp.ids, list) {
+ kfree(id->id);
+ kfree(id);
+ }
+}
+
static void acpi_device_release(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
- kfree(acpi_dev->pnp.cid_list);
- if (acpi_dev->flags.hardware_id)
- kfree(acpi_dev->pnp.hardware_id);
- if (acpi_dev->flags.unique_id)
- kfree(acpi_dev->pnp.unique_id);
+ acpi_free_ids(acpi_dev);
kfree(acpi_dev);
}
static int acpi_device_install_notify_handler(struct acpi_device *device)
{
acpi_status status;
- char *hid;
- hid = acpi_device_hid(device);
- if (!strcmp(hid, ACPI_BUTTON_HID_POWERF))
+ if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
acpi_device_notify_fixed,
device);
- else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF))
+ else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
acpi_device_notify_fixed,
static void acpi_device_remove_notify_handler(struct acpi_device *device)
{
- if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF))
+ if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
acpi_device_notify_fixed);
- else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF))
+ else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
acpi_device_notify_fixed);
else
.uevent = acpi_device_uevent,
};
-static int acpi_device_register(struct acpi_device *device,
- struct acpi_device *parent)
+static int acpi_device_register(struct acpi_device *device)
{
int result;
struct acpi_device_bus_id *acpi_device_bus_id, *new_bus_id;
int found = 0;
+
/*
* Linkage
* -------
* If failed, create one and link it into acpi_bus_id_list
*/
list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) {
- if(!strcmp(acpi_device_bus_id->bus_id, device->flags.hardware_id? device->pnp.hardware_id : "device")) {
- acpi_device_bus_id->instance_no ++;
+ if (!strcmp(acpi_device_bus_id->bus_id,
+ acpi_device_hid(device))) {
+ acpi_device_bus_id->instance_no++;
found = 1;
kfree(new_bus_id);
break;
}
if (!found) {
acpi_device_bus_id = new_bus_id;
- strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
+ strcpy(acpi_device_bus_id->bus_id, acpi_device_hid(device));
acpi_device_bus_id->instance_no = 0;
list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
}
mutex_unlock(&acpi_device_lock);
if (device->parent)
- device->dev.parent = &parent->dev;
+ device->dev.parent = &device->parent->dev;
device->dev.bus = &acpi_bus_type;
device->dev.release = &acpi_device_release;
result = device_register(&device->dev);
/* --------------------------------------------------------------------------
Device Enumeration
-------------------------------------------------------------------------- */
+static struct acpi_device *acpi_bus_get_parent(acpi_handle handle)
+{
+ acpi_status status;
+ int ret;
+ struct acpi_device *device;
+
+ /*
+ * Fixed hardware devices do not appear in the namespace and do not
+ * have handles, but we fabricate acpi_devices for them, so we have
+ * to deal with them specially.
+ */
+ if (handle == NULL)
+ return acpi_root;
+
+ do {
+ status = acpi_get_parent(handle, &handle);
+ if (status == AE_NULL_ENTRY)
+ return NULL;
+ if (ACPI_FAILURE(status))
+ return acpi_root;
+
+ ret = acpi_bus_get_device(handle, &device);
+ if (ret == 0)
+ return device;
+ } while (1);
+}
+
acpi_status
acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
{
if (ACPI_SUCCESS(status))
device->flags.dynamic_status = 1;
- /* Presence of _CID indicates 'compatible_ids' */
- status = acpi_get_handle(device->handle, "_CID", &temp);
- if (ACPI_SUCCESS(status))
- device->flags.compatible_ids = 1;
-
/* Presence of _RMV indicates 'removable' */
status = acpi_get_handle(device->handle, "_RMV", &temp);
if (ACPI_SUCCESS(status))
return 0;
}
-static void acpi_device_get_busid(struct acpi_device *device,
- acpi_handle handle, int type)
+static void acpi_device_get_busid(struct acpi_device *device)
{
char bus_id[5] = { '?', 0 };
struct acpi_buffer buffer = { sizeof(bus_id), bus_id };
* The device's Bus ID is simply the object name.
* TBD: Shouldn't this value be unique (within the ACPI namespace)?
*/
- switch (type) {
- case ACPI_BUS_TYPE_SYSTEM:
+ if (ACPI_IS_ROOT_DEVICE(device)) {
strcpy(device->pnp.bus_id, "ACPI");
- break;
+ return;
+ }
+
+ switch (device->device_type) {
case ACPI_BUS_TYPE_POWER_BUTTON:
strcpy(device->pnp.bus_id, "PWRF");
break;
strcpy(device->pnp.bus_id, "SLPF");
break;
default:
- acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+ acpi_get_name(device->handle, ACPI_SINGLE_NAME, &buffer);
/* Clean up trailing underscores (if any) */
for (i = 3; i > 1; i--) {
if (bus_id[i] == '_')
return acpi_get_handle(device->handle, "_DCK", &tmp);
}
-static struct acpica_device_id_list*
-acpi_add_cid(
- struct acpi_device_info *info,
- struct acpica_device_id *new_cid)
+char *acpi_device_hid(struct acpi_device *device)
{
- struct acpica_device_id_list *cid;
- char *next_id_string;
- acpi_size cid_length;
- acpi_size new_cid_length;
- u32 i;
-
-
- /* Allocate new CID list with room for the new CID */
-
- if (!new_cid)
- new_cid_length = info->compatible_id_list.list_size;
- else if (info->compatible_id_list.list_size)
- new_cid_length = info->compatible_id_list.list_size +
- new_cid->length + sizeof(struct acpica_device_id);
- else
- new_cid_length = sizeof(struct acpica_device_id_list) + new_cid->length;
-
- cid = ACPI_ALLOCATE_ZEROED(new_cid_length);
- if (!cid) {
- return NULL;
- }
-
- cid->list_size = new_cid_length;
- cid->count = info->compatible_id_list.count;
- if (new_cid)
- cid->count++;
- next_id_string = (char *) cid->ids + (cid->count * sizeof(struct acpica_device_id));
-
- /* Copy all existing CIDs */
-
- for (i = 0; i < info->compatible_id_list.count; i++) {
- cid_length = info->compatible_id_list.ids[i].length;
- cid->ids[i].string = next_id_string;
- cid->ids[i].length = cid_length;
+ struct acpi_hardware_id *hid;
- ACPI_MEMCPY(next_id_string, info->compatible_id_list.ids[i].string,
- cid_length);
-
- next_id_string += cid_length;
- }
+ hid = list_first_entry(&device->pnp.ids, struct acpi_hardware_id, list);
+ return hid->id;
+}
+EXPORT_SYMBOL(acpi_device_hid);
- /* Append the new CID */
+static void acpi_add_id(struct acpi_device *device, const char *dev_id)
+{
+ struct acpi_hardware_id *id;
- if (new_cid) {
- cid->ids[i].string = next_id_string;
- cid->ids[i].length = new_cid->length;
+ id = kmalloc(sizeof(*id), GFP_KERNEL);
+ if (!id)
+ return;
- ACPI_MEMCPY(next_id_string, new_cid->string, new_cid->length);
+ id->id = kmalloc(strlen(dev_id) + 1, GFP_KERNEL);
+ if (!id->id) {
+ kfree(id);
+ return;
}
- return cid;
+ strcpy(id->id, dev_id);
+ list_add_tail(&id->list, &device->pnp.ids);
}
-static void acpi_device_set_id(struct acpi_device *device,
- struct acpi_device *parent, acpi_handle handle,
- int type)
+static void acpi_device_set_id(struct acpi_device *device)
{
- struct acpi_device_info *info = NULL;
- char *hid = NULL;
- char *uid = NULL;
- struct acpica_device_id_list *cid_list = NULL;
- char *cid_add = NULL;
acpi_status status;
+ struct acpi_device_info *info;
+ struct acpica_device_id_list *cid_list;
+ int i;
- switch (type) {
+ switch (device->device_type) {
case ACPI_BUS_TYPE_DEVICE:
- status = acpi_get_object_info(handle, &info);
+ if (ACPI_IS_ROOT_DEVICE(device)) {
+ acpi_add_id(device, ACPI_SYSTEM_HID);
+ break;
+ } else if (ACPI_IS_ROOT_DEVICE(device->parent)) {
+ /* \_SB_, the only root-level namespace device */
+ acpi_add_id(device, ACPI_BUS_HID);
+ strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
+ strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
+ break;
+ }
+
+ status = acpi_get_object_info(device->handle, &info);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__);
return;
}
if (info->valid & ACPI_VALID_HID)
- hid = info->hardware_id.string;
- if (info->valid & ACPI_VALID_UID)
- uid = info->unique_id.string;
- if (info->valid & ACPI_VALID_CID)
+ acpi_add_id(device, info->hardware_id.string);
+ if (info->valid & ACPI_VALID_CID) {
cid_list = &info->compatible_id_list;
+ for (i = 0; i < cid_list->count; i++)
+ acpi_add_id(device, cid_list->ids[i].string);
+ }
if (info->valid & ACPI_VALID_ADR) {
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
- /* If we have a video/bay/dock device, add our selfdefined
- HID to the CID list. Like that the video/bay/dock drivers
- will get autoloaded and the device might still match
- against another driver.
- */
+ /*
+ * Some devices don't reliably have _HIDs & _CIDs, so add
+ * synthetic HIDs to make sure drivers can find them.
+ */
if (acpi_is_video_device(device))
- cid_add = ACPI_VIDEO_HID;
+ acpi_add_id(device, ACPI_VIDEO_HID);
else if (ACPI_SUCCESS(acpi_bay_match(device)))
- cid_add = ACPI_BAY_HID;
+ acpi_add_id(device, ACPI_BAY_HID);
else if (ACPI_SUCCESS(acpi_dock_match(device)))
- cid_add = ACPI_DOCK_HID;
+ acpi_add_id(device, ACPI_DOCK_HID);
break;
case ACPI_BUS_TYPE_POWER:
- hid = ACPI_POWER_HID;
+ acpi_add_id(device, ACPI_POWER_HID);
break;
case ACPI_BUS_TYPE_PROCESSOR:
- hid = ACPI_PROCESSOR_OBJECT_HID;
- break;
- case ACPI_BUS_TYPE_SYSTEM:
- hid = ACPI_SYSTEM_HID;
+ acpi_add_id(device, ACPI_PROCESSOR_OBJECT_HID);
break;
case ACPI_BUS_TYPE_THERMAL:
- hid = ACPI_THERMAL_HID;
+ acpi_add_id(device, ACPI_THERMAL_HID);
break;
case ACPI_BUS_TYPE_POWER_BUTTON:
- hid = ACPI_BUTTON_HID_POWERF;
+ acpi_add_id(device, ACPI_BUTTON_HID_POWERF);
break;
case ACPI_BUS_TYPE_SLEEP_BUTTON:
- hid = ACPI_BUTTON_HID_SLEEPF;
+ acpi_add_id(device, ACPI_BUTTON_HID_SLEEPF);
break;
}
/*
- * \_SB
- * ----
- * Fix for the system root bus device -- the only root-level device.
+ * We build acpi_devices for some objects that don't have _HID or _CID,
+ * e.g., PCI bridges and slots. Drivers can't bind to these objects,
+ * but we do use them indirectly by traversing the acpi_device tree.
+ * This generic ID isn't useful for driver binding, but it provides
+ * the useful property that "every acpi_device has an ID."
*/
- if (((acpi_handle)parent == ACPI_ROOT_OBJECT) && (type == ACPI_BUS_TYPE_DEVICE)) {
- hid = ACPI_BUS_HID;
- strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
- strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
- }
-
- if (hid) {
- device->pnp.hardware_id = ACPI_ALLOCATE_ZEROED(strlen (hid) + 1);
- if (device->pnp.hardware_id) {
- strcpy(device->pnp.hardware_id, hid);
- device->flags.hardware_id = 1;
- }
- }
- if (!device->flags.hardware_id)
- device->pnp.hardware_id = "";
-
- if (uid) {
- device->pnp.unique_id = ACPI_ALLOCATE_ZEROED(strlen (uid) + 1);
- if (device->pnp.unique_id) {
- strcpy(device->pnp.unique_id, uid);
- device->flags.unique_id = 1;
- }
- }
- if (!device->flags.unique_id)
- device->pnp.unique_id = "";
-
- if (cid_list || cid_add) {
- struct acpica_device_id_list *list;
-
- if (cid_add) {
- struct acpica_device_id cid;
- cid.length = strlen (cid_add) + 1;
- cid.string = cid_add;
-
- list = acpi_add_cid(info, &cid);
- } else {
- list = acpi_add_cid(info, NULL);
- }
-
- if (list) {
- device->pnp.cid_list = list;
- if (cid_add)
- device->flags.compatible_ids = 1;
- }
- }
-
- kfree(info);
+ if (list_empty(&device->pnp.ids))
+ acpi_add_id(device, "device");
}
-static int acpi_device_set_context(struct acpi_device *device, int type)
+static int acpi_device_set_context(struct acpi_device *device)
{
- acpi_status status = AE_OK;
- int result = 0;
+ acpi_status status;
+
/*
* Context
* -------
* Attach this 'struct acpi_device' to the ACPI object. This makes
- * resolutions from handle->device very efficient. Note that we need
- * to be careful with fixed-feature devices as they all attach to the
- * root object.
+ * resolutions from handle->device very efficient. Fixed hardware
+ * devices have no handles, so we skip them.
*/
- if (type != ACPI_BUS_TYPE_POWER_BUTTON &&
- type != ACPI_BUS_TYPE_SLEEP_BUTTON) {
- status = acpi_attach_data(device->handle,
- acpi_bus_data_handler, device);
+ if (!device->handle)
+ return 0;
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error attaching device data\n");
- result = -ENODEV;
- }
- }
- return result;
+ status = acpi_attach_data(device->handle,
+ acpi_bus_data_handler, device);
+ if (ACPI_SUCCESS(status))
+ return 0;
+
+ printk(KERN_ERR PREFIX "Error attaching device data\n");
+ return -ENODEV;
}
static int acpi_bus_remove(struct acpi_device *dev, int rmdevice)
return 0;
}
-static int
-acpi_add_single_object(struct acpi_device **child,
- struct acpi_device *parent, acpi_handle handle, int type,
- struct acpi_bus_ops *ops)
+static int acpi_add_single_object(struct acpi_device **child,
+ acpi_handle handle, int type,
+ unsigned long long sta,
+ struct acpi_bus_ops *ops)
{
- int result = 0;
- struct acpi_device *device = NULL;
-
-
- if (!child)
- return -EINVAL;
+ int result;
+ struct acpi_device *device;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
device = kzalloc(sizeof(struct acpi_device), GFP_KERNEL);
if (!device) {
return -ENOMEM;
}
+ INIT_LIST_HEAD(&device->pnp.ids);
+ device->device_type = type;
device->handle = handle;
- device->parent = parent;
+ device->parent = acpi_bus_get_parent(handle);
device->bus_ops = *ops; /* workround for not call .start */
+ STRUCT_TO_INT(device->status) = sta;
-
- acpi_device_get_busid(device, handle, type);
+ acpi_device_get_busid(device);
/*
* Flags
* -----
- * Get prior to calling acpi_bus_get_status() so we know whether
- * or not _STA is present. Note that we only look for object
- * handles -- cannot evaluate objects until we know the device is
- * present and properly initialized.
+ * Note that we only look for object handles -- cannot evaluate objects
+ * until we know the device is present and properly initialized.
*/
result = acpi_bus_get_flags(device);
if (result)
goto end;
- /*
- * Status
- * ------
- * See if the device is present. We always assume that non-Device
- * and non-Processor objects (e.g. thermal zones, power resources,
- * etc.) are present, functioning, etc. (at least when parent object
- * is present). Note that _STA has a different meaning for some
- * objects (e.g. power resources) so we need to be careful how we use
- * it.
- */
- switch (type) {
- case ACPI_BUS_TYPE_PROCESSOR:
- case ACPI_BUS_TYPE_DEVICE:
- result = acpi_bus_get_status(device);
- if (ACPI_FAILURE(result)) {
- result = -ENODEV;
- goto end;
- }
- /*
- * When the device is neither present nor functional, the
- * device should not be added to Linux ACPI device tree.
- * When the status of the device is not present but functinal,
- * it should be added to Linux ACPI tree. For example : bay
- * device , dock device.
- * In such conditions it is unncessary to check whether it is
- * bay device or dock device.
- */
- if (!device->status.present && !device->status.functional) {
- result = -ENODEV;
- goto end;
- }
- break;
- default:
- STRUCT_TO_INT(device->status) =
- ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
- ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
- break;
- }
-
/*
* Initialize Device
* -----------------
* TBD: Synch with Core's enumeration/initialization process.
*/
-
- /*
- * Hardware ID, Unique ID, & Bus Address
- * -------------------------------------
- */
- acpi_device_set_id(device, parent, handle, type);
+ acpi_device_set_id(device);
/*
* Power Management
goto end;
}
- if ((result = acpi_device_set_context(device, type)))
+ if ((result = acpi_device_set_context(device)))
goto end;
- result = acpi_device_register(device, parent);
+ result = acpi_device_register(device);
/*
* Bind _ADR-Based Devices when hot add
}
end:
- if (!result)
+ if (!result) {
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Adding %s [%s] parent %s\n", dev_name(&device->dev),
+ (char *) buffer.pointer,
+ device->parent ? dev_name(&device->parent->dev) :
+ "(null)"));
+ kfree(buffer.pointer);
*child = device;
- else
+ } else
acpi_device_release(&device->dev);
return result;
}
-static int acpi_bus_scan(struct acpi_device *start, struct acpi_bus_ops *ops)
+#define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING)
+
+static int acpi_bus_type_and_status(acpi_handle handle, int *type,
+ unsigned long long *sta)
{
- acpi_status status = AE_OK;
- struct acpi_device *parent = NULL;
- struct acpi_device *child = NULL;
- acpi_handle phandle = NULL;
- acpi_handle chandle = NULL;
- acpi_object_type type = 0;
- u32 level = 1;
+ acpi_status status;
+ acpi_object_type acpi_type;
+ status = acpi_get_type(handle, &acpi_type);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
- if (!start)
- return -EINVAL;
+ switch (acpi_type) {
+ case ACPI_TYPE_ANY: /* for ACPI_ROOT_OBJECT */
+ case ACPI_TYPE_DEVICE:
+ *type = ACPI_BUS_TYPE_DEVICE;
+ status = acpi_bus_get_status_handle(handle, sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ break;
+ case ACPI_TYPE_PROCESSOR:
+ *type = ACPI_BUS_TYPE_PROCESSOR;
+ status = acpi_bus_get_status_handle(handle, sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ break;
+ case ACPI_TYPE_THERMAL:
+ *type = ACPI_BUS_TYPE_THERMAL;
+ *sta = ACPI_STA_DEFAULT;
+ break;
+ case ACPI_TYPE_POWER:
+ *type = ACPI_BUS_TYPE_POWER;
+ *sta = ACPI_STA_DEFAULT;
+ break;
+ default:
+ return -ENODEV;
+ }
- parent = start;
- phandle = start->handle;
+ return 0;
+}
- /*
- * Parse through the ACPI namespace, identify all 'devices', and
- * create a new 'struct acpi_device' for each.
- */
- while ((level > 0) && parent) {
+static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl,
+ void *context, void **return_value)
+{
+ struct acpi_bus_ops *ops = context;
+ int type;
+ unsigned long long sta;
+ struct acpi_device *device;
+ acpi_status status;
+ int result;
- status = acpi_get_next_object(ACPI_TYPE_ANY, phandle,
- chandle, &chandle);
+ result = acpi_bus_type_and_status(handle, &type, &sta);
+ if (result)
+ return AE_OK;
- /*
- * If this scope is exhausted then move our way back up.
- */
- if (ACPI_FAILURE(status)) {
- level--;
- chandle = phandle;
- acpi_get_parent(phandle, &phandle);
- if (parent->parent)
- parent = parent->parent;
- continue;
- }
+ if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
+ !(sta & ACPI_STA_DEVICE_FUNCTIONING))
+ return AE_CTRL_DEPTH;
- status = acpi_get_type(chandle, &type);
- if (ACPI_FAILURE(status))
- continue;
+ /*
+ * We may already have an acpi_device from a previous enumeration. If
+ * so, we needn't add it again, but we may still have to start it.
+ */
+ device = NULL;
+ acpi_bus_get_device(handle, &device);
+ if (ops->acpi_op_add && !device)
+ acpi_add_single_object(&device, handle, type, sta, ops);
- /*
- * If this is a scope object then parse it (depth-first).
- */
- if (type == ACPI_TYPE_LOCAL_SCOPE) {
- level++;
- phandle = chandle;
- chandle = NULL;
- continue;
- }
+ if (!device)
+ return AE_CTRL_DEPTH;
- /*
- * We're only interested in objects that we consider 'devices'.
- */
- switch (type) {
- case ACPI_TYPE_DEVICE:
- type = ACPI_BUS_TYPE_DEVICE;
- break;
- case ACPI_TYPE_PROCESSOR:
- type = ACPI_BUS_TYPE_PROCESSOR;
- break;
- case ACPI_TYPE_THERMAL:
- type = ACPI_BUS_TYPE_THERMAL;
- break;
- case ACPI_TYPE_POWER:
- type = ACPI_BUS_TYPE_POWER;
- break;
- default:
- continue;
- }
+ if (ops->acpi_op_start && !(ops->acpi_op_add)) {
+ status = acpi_start_single_object(device);
+ if (ACPI_FAILURE(status))
+ return AE_CTRL_DEPTH;
+ }
- if (ops->acpi_op_add)
- status = acpi_add_single_object(&child, parent,
- chandle, type, ops);
- else
- status = acpi_bus_get_device(chandle, &child);
+ if (!*return_value)
+ *return_value = device;
+ return AE_OK;
+}
- if (ACPI_FAILURE(status))
- continue;
+static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops,
+ struct acpi_device **child)
+{
+ acpi_status status;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ void *device = NULL;
- if (ops->acpi_op_start && !(ops->acpi_op_add)) {
- status = acpi_start_single_object(child);
- if (ACPI_FAILURE(status))
- continue;
- }
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ printk(KERN_INFO PREFIX "Enumerating devices from [%s]\n",
+ (char *) buffer.pointer);
- /*
- * If the device is present, enabled, and functioning then
- * parse its scope (depth-first). Note that we need to
- * represent absent devices to facilitate PnP notifications
- * -- but only the subtree head (not all of its children,
- * which will be enumerated when the parent is inserted).
- *
- * TBD: Need notifications and other detection mechanisms
- * in place before we can fully implement this.
- */
- /*
- * When the device is not present but functional, it is also
- * necessary to scan the children of this device.
- */
- if (child->status.present || (!child->status.present &&
- child->status.functional)) {
- status = acpi_get_next_object(ACPI_TYPE_ANY, chandle,
- NULL, NULL);
- if (ACPI_SUCCESS(status)) {
- level++;
- phandle = chandle;
- chandle = NULL;
- parent = child;
- }
- }
- }
+ status = acpi_bus_check_add(handle, 0, ops, &device);
+ if (ACPI_SUCCESS(status))
+ acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
+ acpi_bus_check_add, ops, &device);
+ if (child)
+ *child = device;
return 0;
}
acpi_bus_add(struct acpi_device **child,
struct acpi_device *parent, acpi_handle handle, int type)
{
- int result;
struct acpi_bus_ops ops;
memset(&ops, 0, sizeof(ops));
ops.acpi_op_add = 1;
- result = acpi_add_single_object(child, parent, handle, type, &ops);
- if (!result)
- result = acpi_bus_scan(*child, &ops);
-
- return result;
+ acpi_bus_scan(handle, &ops, child);
+ return 0;
}
EXPORT_SYMBOL(acpi_bus_add);
int acpi_bus_start(struct acpi_device *device)
{
- int result;
struct acpi_bus_ops ops;
+ memset(&ops, 0, sizeof(ops));
+ ops.acpi_op_start = 1;
- if (!device)
- return -EINVAL;
-
- result = acpi_start_single_object(device);
- if (!result) {
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_start = 1;
- result = acpi_bus_scan(device, &ops);
- }
- return result;
+ acpi_bus_scan(device->handle, &ops, NULL);
+ return 0;
}
EXPORT_SYMBOL(acpi_bus_start);
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
-static int acpi_bus_scan_fixed(struct acpi_device *root)
+static int acpi_bus_scan_fixed(void)
{
int result = 0;
struct acpi_device *device = NULL;
struct acpi_bus_ops ops;
- if (!root)
- return -ENODEV;
-
memset(&ops, 0, sizeof(ops));
ops.acpi_op_add = 1;
ops.acpi_op_start = 1;
* Enumerate all fixed-feature devices.
*/
if ((acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON) == 0) {
- result = acpi_add_single_object(&device, acpi_root,
- NULL,
+ result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_POWER_BUTTON,
+ ACPI_STA_DEFAULT,
&ops);
}
if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {
- result = acpi_add_single_object(&device, acpi_root,
- NULL,
+ result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_SLEEP_BUTTON,
+ ACPI_STA_DEFAULT,
&ops);
}
printk(KERN_ERR PREFIX "Could not register bus type\n");
}
- /*
- * Create the root device in the bus's device tree
- */
- result = acpi_add_single_object(&acpi_root, NULL, ACPI_ROOT_OBJECT,
- ACPI_BUS_TYPE_SYSTEM, &ops);
- if (result)
- goto Done;
-
/*
* Enumerate devices in the ACPI namespace.
*/
- result = acpi_bus_scan_fixed(acpi_root);
+ result = acpi_bus_scan(ACPI_ROOT_OBJECT, &ops, &acpi_root);
if (!result)
- result = acpi_bus_scan(acpi_root, &ops);
+ result = acpi_bus_scan_fixed();
if (result)
acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
-Done:
return result;
}
he_dev->rbps_base = pci_alloc_consistent(he_dev->pci_dev,
CONFIG_RBPS_SIZE * sizeof(struct he_rbp), &he_dev->rbps_phys);
if (he_dev->rbps_base == NULL) {
- hprintk("failed to alloc rbps\n");
- return -ENOMEM;
+ hprintk("failed to alloc rbps_base\n");
+ goto out_destroy_rbps_pool;
}
memset(he_dev->rbps_base, 0, CONFIG_RBPS_SIZE * sizeof(struct he_rbp));
he_dev->rbps_virt = kmalloc(CONFIG_RBPS_SIZE * sizeof(struct he_virt), GFP_KERNEL);
+ if (he_dev->rbps_virt == NULL) {
+ hprintk("failed to alloc rbps_virt\n");
+ goto out_free_rbps_base;
+ }
for (i = 0; i < CONFIG_RBPS_SIZE; ++i) {
dma_addr_t dma_handle;
cpuaddr = pci_pool_alloc(he_dev->rbps_pool, GFP_KERNEL|GFP_DMA, &dma_handle);
if (cpuaddr == NULL)
- return -ENOMEM;
+ goto out_free_rbps_virt;
he_dev->rbps_virt[i].virt = cpuaddr;
he_dev->rbps_base[i].status = RBP_LOANED | RBP_SMALLBUF | (i << RBP_INDEX_OFF);
CONFIG_RBPL_BUFSIZE, 8, 0);
if (he_dev->rbpl_pool == NULL) {
hprintk("unable to create rbpl pool\n");
- return -ENOMEM;
+ goto out_free_rbps_virt;
}
he_dev->rbpl_base = pci_alloc_consistent(he_dev->pci_dev,
CONFIG_RBPL_SIZE * sizeof(struct he_rbp), &he_dev->rbpl_phys);
if (he_dev->rbpl_base == NULL) {
- hprintk("failed to alloc rbpl\n");
- return -ENOMEM;
+ hprintk("failed to alloc rbpl_base\n");
+ goto out_destroy_rbpl_pool;
}
memset(he_dev->rbpl_base, 0, CONFIG_RBPL_SIZE * sizeof(struct he_rbp));
he_dev->rbpl_virt = kmalloc(CONFIG_RBPL_SIZE * sizeof(struct he_virt), GFP_KERNEL);
+ if (he_dev->rbpl_virt == NULL) {
+ hprintk("failed to alloc rbpl_virt\n");
+ goto out_free_rbpl_base;
+ }
for (i = 0; i < CONFIG_RBPL_SIZE; ++i) {
dma_addr_t dma_handle;
cpuaddr = pci_pool_alloc(he_dev->rbpl_pool, GFP_KERNEL|GFP_DMA, &dma_handle);
if (cpuaddr == NULL)
- return -ENOMEM;
+ goto out_free_rbpl_virt;
he_dev->rbpl_virt[i].virt = cpuaddr;
he_dev->rbpl_base[i].status = RBP_LOANED | (i << RBP_INDEX_OFF);
CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), &he_dev->rbrq_phys);
if (he_dev->rbrq_base == NULL) {
hprintk("failed to allocate rbrq\n");
- return -ENOMEM;
+ goto out_free_rbpl_virt;
}
memset(he_dev->rbrq_base, 0, CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq));
CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), &he_dev->tbrq_phys);
if (he_dev->tbrq_base == NULL) {
hprintk("failed to allocate tbrq\n");
- return -ENOMEM;
+ goto out_free_rbpq_base;
}
memset(he_dev->tbrq_base, 0, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq));
he_writel(he_dev, CONFIG_TBRQ_THRESH, G0_TBRQ_THRESH + (group * 16));
return 0;
+
+out_free_rbpq_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBRQ_SIZE *
+ sizeof(struct he_rbrq), he_dev->rbrq_base,
+ he_dev->rbrq_phys);
+ i = CONFIG_RBPL_SIZE;
+out_free_rbpl_virt:
+ while (--i)
+ pci_pool_free(he_dev->rbps_pool, he_dev->rbpl_virt[i].virt,
+ he_dev->rbps_base[i].phys);
+ kfree(he_dev->rbpl_virt);
+
+out_free_rbpl_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBPL_SIZE *
+ sizeof(struct he_rbp), he_dev->rbpl_base,
+ he_dev->rbpl_phys);
+out_destroy_rbpl_pool:
+ pci_pool_destroy(he_dev->rbpl_pool);
+
+ i = CONFIG_RBPL_SIZE;
+out_free_rbps_virt:
+ while (--i)
+ pci_pool_free(he_dev->rbpl_pool, he_dev->rbps_virt[i].virt,
+ he_dev->rbpl_base[i].phys);
+ kfree(he_dev->rbps_virt);
+
+out_free_rbps_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBPS_SIZE *
+ sizeof(struct he_rbp), he_dev->rbps_base,
+ he_dev->rbps_phys);
+out_destroy_rbps_pool:
+ pci_pool_destroy(he_dev->rbps_pool);
+ return -ENOMEM;
}
static int __devinit
SOLOS_ATTR_RO(RSUnCorrectedErrorsUp)
SOLOS_ATTR_RO(InterleaveRDn)
SOLOS_ATTR_RO(InterleaveRUp)
+SOLOS_ATTR_RO(BisRDn)
+SOLOS_ATTR_RO(BisRUp)
+SOLOS_ATTR_RO(INPdown)
+SOLOS_ATTR_RO(INPup)
SOLOS_ATTR_RO(ShowtimeStart)
SOLOS_ATTR_RO(ATURVendor)
SOLOS_ATTR_RO(ATUCCountry)
SOLOS_ATTR_RW(LineMode)
SOLOS_ATTR_RW(Profile)
SOLOS_ATTR_RW(DetectNoise)
+SOLOS_ATTR_RW(BisAForceSNRMarginDn)
+SOLOS_ATTR_RW(BisMForceSNRMarginDn)
+SOLOS_ATTR_RW(BisAMaxMargin)
+SOLOS_ATTR_RW(BisMMaxMargin)
+SOLOS_ATTR_RW(AnnexAForceSNRMarginDn)
+SOLOS_ATTR_RW(AnnexAMaxMargin)
+SOLOS_ATTR_RW(AnnexMMaxMargin)
SOLOS_ATTR_RO(SupportedAnnexes)
SOLOS_ATTR_RO(Status)
SOLOS_ATTR_RO(TotalStart)
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
#define DATA_RAM_SIZE 32768
-#define BUF_SIZE 4096
+#define BUF_SIZE 2048
+#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
#define FPGA_PAGE 528 /* FPGA flash page size*/
#define SOLOS_PAGE 512 /* Solos flash page size*/
#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
-#define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2)
-#define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE)
+#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
#define RX_DMA_SIZE 2048
+#define FPGA_VERSION(a,b) (((a) << 8) + (b))
+#define LEGACY_BUFFERS 2
+#define DMA_SUPPORTED 4
+
static int reset = 0;
static int atmdebug = 0;
static int firmware_upgrade = 0;
static int fpga_upgrade = 0;
+static int db_firmware_upgrade = 0;
+static int db_fpga_upgrade = 0;
struct pkt_hdr {
__le16 size;
wait_queue_head_t param_wq;
wait_queue_head_t fw_wq;
int using_dma;
+ int fpga_version;
+ int buffer_size;
};
MODULE_PARM_DESC(atmdebug, "Print ATM data");
MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
+MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
+MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
module_param(reset, int, 0444);
module_param(atmdebug, int, 0644);
module_param(firmware_upgrade, int, 0444);
module_param(fpga_upgrade, int, 0444);
+module_param(db_firmware_upgrade, int, 0444);
+module_param(db_fpga_upgrade, int, 0444);
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
struct atm_vcc *vcc);
if (chip == 0) {
fw_name = "solos-FPGA.bin";
blocksize = FPGA_BLOCK;
- } else {
+ }
+
+ if (chip == 1) {
fw_name = "solos-Firmware.bin";
blocksize = SOLOS_BLOCK;
}
+
+ if (chip == 2){
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-db-FPGA.bin";
+ blocksize = FPGA_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+ return -EPERM;
+ }
+ }
+
+ if (chip == 3){
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-Firmware.bin";
+ blocksize = SOLOS_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+ return -EPERM;
+ }
+ }
if (request_firmware(&fw, fw_name, &card->dev->dev))
return -ENOENT;
data32 = ioread32(card->config_regs + FPGA_MODE);
/* Set mode to Chip Erase */
- dev_info(&card->dev->dev, "Set FPGA Flash mode to %s Chip Erase\n",
- chip?"Solos":"FPGA");
+ if(chip == 0 || chip == 2)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
+ if(chip == 1 || chip == 3)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
iowrite32((chip * 2), card->config_regs + FLASH_MODE);
/* Copy block to buffer, swapping each 16 bits */
for(i = 0; i < blocksize; i += 4) {
uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
- iowrite32(word, RX_BUF(card, 3) + i);
+ if(card->fpga_version > LEGACY_BUFFERS)
+ iowrite32(word, FLASH_BUF + i);
+ else
+ iowrite32(word, RX_BUF(card, 3) + i);
}
/* Specify block number and then trigger flash write */
memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
size = le16_to_cpu(header->size);
+ if (size > (card->buffer_size - sizeof(*header))){
+ dev_warn(&card->dev->dev, "Invalid buffer size\n");
+ continue;
+ }
skb = alloc_skb(size + 1, GFP_ATOMIC);
if (!skb) {
fpga_ver = (data32 & 0x0000FFFF);
major_ver = ((data32 & 0xFF000000) >> 24);
minor_ver = ((data32 & 0x00FF0000) >> 16);
+ card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
+ if (card->fpga_version > LEGACY_BUFFERS)
+ card->buffer_size = BUF_SIZE;
+ else
+ card->buffer_size = OLD_BUF_SIZE;
dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
major_ver, minor_ver, fpga_ver);
- if (0 && fpga_ver > 27)
+ if (card->fpga_version >= DMA_SUPPORTED){
card->using_dma = 1;
- else {
+ } else {
+ card->using_dma = 0;
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
if (firmware_upgrade)
flash_upgrade(card, 1);
+ if (db_fpga_upgrade)
+ flash_upgrade(card, 2);
+
+ if (db_firmware_upgrade)
+ flash_upgrade(card, 3);
+
err = atm_init(card);
if (err)
goto out_free_irq;
return 0;
}
-static int cdrom_sysctl_info(ctl_table *ctl, int write, struct file * filp,
+static int cdrom_sysctl_info(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int pos;
goto done;
doit:
mutex_unlock(&cdrom_mutex);
- return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return proc_dostring(ctl, write, buffer, lenp, ppos);
done:
printk(KERN_INFO "cdrom: info buffer too small\n");
goto doit;
mutex_unlock(&cdrom_mutex);
}
-static int cdrom_sysctl_handler(ctl_table *ctl, int write, struct file * filp,
+static int cdrom_sysctl_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write) {
The mmtimer device allows direct userspace access to the
Altix system timer.
+config UV_MMTIMER
+ tristate "UV_MMTIMER Memory mapped RTC for SGI UV"
+ depends on X86_UV
+ default m
+ help
+ The uv_mmtimer device allows direct userspace access to the
+ UV system timer.
+
source "drivers/char/tpm/Kconfig"
config TELCLOCK
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
obj-$(CONFIG_MSPEC) += mspec.o
obj-$(CONFIG_MMTIMER) += mmtimer.o
+obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_HVCS) += hvcs.o
obj-$(CONFIG_IBM_BSR) += bsr.o
#define PCI_DEVICE_ID_INTEL_Q35_IG 0x29B2
#define PCI_DEVICE_ID_INTEL_Q33_HB 0x29D0
#define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2
+#define PCI_DEVICE_ID_INTEL_B43_HB 0x2E40
+#define PCI_DEVICE_ID_INTEL_B43_IG 0x2E42
#define PCI_DEVICE_ID_INTEL_GM45_HB 0x2A40
#define PCI_DEVICE_ID_INTEL_GM45_IG 0x2A42
#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_B43_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB)
if (!intel_private.i8xx_page)
return;
- /* make page uncached */
- map_page_into_agp(intel_private.i8xx_page);
-
intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page);
if (!intel_private.i8xx_flush_page)
intel_i830_fini_flush();
}
+static void
+do_wbinvd(void *null)
+{
+ wbinvd();
+}
+
+/* The chipset_flush interface needs to get data that has already been
+ * flushed out of the CPU all the way out to main memory, because the GPU
+ * doesn't snoop those buffers.
+ *
+ * The 8xx series doesn't have the same lovely interface for flushing the
+ * chipset write buffers that the later chips do. According to the 865
+ * specs, it's 64 octwords, or 1KB. So, to get those previous things in
+ * that buffer out, we just fill 1KB and clflush it out, on the assumption
+ * that it'll push whatever was in there out. It appears to work.
+ */
static void intel_i830_chipset_flush(struct agp_bridge_data *bridge)
{
unsigned int *pg = intel_private.i8xx_flush_page;
- int i;
- for (i = 0; i < 256; i += 2)
- *(pg + i) = i;
+ memset(pg, 0, 1024);
- wmb();
+ if (cpu_has_clflush) {
+ clflush_cache_range(pg, 1024);
+ } else {
+ if (on_each_cpu(do_wbinvd, NULL, 1) != 0)
+ printk(KERN_ERR "Timed out waiting for cache flush.\n");
+ }
}
/* The intel i830 automatically initializes the agp aperture during POST.
case PCI_DEVICE_ID_INTEL_Q45_HB:
case PCI_DEVICE_ID_INTEL_G45_HB:
case PCI_DEVICE_ID_INTEL_G41_HB:
+ case PCI_DEVICE_ID_INTEL_B43_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB:
"Q45/Q43", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0,
"G45/G43", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_B43_HB, PCI_DEVICE_ID_INTEL_B43_IG, 0,
+ "B43", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0,
"G41", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IGDNG_D_HB, PCI_DEVICE_ID_INTEL_IGDNG_D_IG, 0,
ID(PCI_DEVICE_ID_INTEL_Q45_HB),
ID(PCI_DEVICE_ID_INTEL_G45_HB),
ID(PCI_DEVICE_ID_INTEL_G41_HB),
+ ID(PCI_DEVICE_ID_INTEL_B43_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB),
/*
* Blackfin On-Chip OTP Memory Interface
- * Supports BF52x/BF54x
*
- * Copyright 2007-2008 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/types.h>
+#include <mtd/mtd-abi.h>
#include <asm/blackfin.h>
+#include <asm/bfrom.h>
#include <asm/uaccess.h>
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
static DEFINE_MUTEX(bfin_otp_lock);
-/* OTP Boot ROM functions */
-#define _BOOTROM_OTP_COMMAND 0xEF000018
-#define _BOOTROM_OTP_READ 0xEF00001A
-#define _BOOTROM_OTP_WRITE 0xEF00001C
-
-static u32 (* const otp_command)(u32 command, u32 value) = (void *)_BOOTROM_OTP_COMMAND;
-static u32 (* const otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_READ;
-static u32 (* const otp_write)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_WRITE;
-
-/* otp_command(): defines for "command" */
-#define OTP_INIT 0x00000001
-#define OTP_CLOSE 0x00000002
-
-/* otp_{read,write}(): defines for "flags" */
-#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */
-#define OTP_UPPER_HALF 0x00000001
-#define OTP_NO_ECC 0x00000010 /* do not use ECC */
-#define OTP_LOCK 0x00000020 /* sets page protection bit for page */
-#define OTP_ACCESS_READ 0x00001000
-#define OTP_ACCESS_READWRITE 0x00002000
-
-/* Return values for all functions */
-#define OTP_SUCCESS 0x00000000
-#define OTP_MASTER_ERROR 0x001
-#define OTP_WRITE_ERROR 0x003
-#define OTP_READ_ERROR 0x005
-#define OTP_ACC_VIO_ERROR 0x009
-#define OTP_DATA_MULT_ERROR 0x011
-#define OTP_ECC_MULT_ERROR 0x021
-#define OTP_PREV_WR_ERROR 0x041
-#define OTP_DATA_SB_WARN 0x100
-#define OTP_ECC_SB_WARN 0x200
-
/**
* bfin_otp_read - Read OTP pages
*
page = *pos / (sizeof(u64) * 2);
while (bytes_done < count) {
flags = (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF);
- stamp("processing page %i (%s)", page, (flags == OTP_UPPER_HALF ? "upper" : "lower"));
- ret = otp_read(page, flags, &content);
+ stamp("processing page %i (0x%x:%s)", page, flags,
+ (flags & OTP_UPPER_HALF ? "upper" : "lower"));
+ ret = bfrom_OtpRead(page, flags, &content);
if (ret & OTP_MASTER_ERROR) {
+ stamp("error from otp: 0x%x", ret);
bytes_done = -EIO;
break;
}
bytes_done = -EFAULT;
break;
}
- if (flags == OTP_UPPER_HALF)
+ if (flags & OTP_UPPER_HALF)
++page;
bytes_done += sizeof(content);
*pos += sizeof(content);
}
#ifdef CONFIG_BFIN_OTP_WRITE_ENABLE
+static bool allow_writes;
+
+/**
+ * bfin_otp_init_timing - setup OTP timing parameters
+ *
+ * Required before doing any write operation. Algorithms from HRM.
+ */
+static u32 bfin_otp_init_timing(void)
+{
+ u32 tp1, tp2, tp3, timing;
+
+ tp1 = get_sclk() / 1000000;
+ tp2 = (2 * get_sclk() / 10000000) << 8;
+ tp3 = (0x1401) << 15;
+ timing = tp1 | tp2 | tp3;
+ if (bfrom_OtpCommand(OTP_INIT, timing))
+ return 0;
+
+ return timing;
+}
+
+/**
+ * bfin_otp_deinit_timing - set timings to only allow reads
+ *
+ * Should be called after all writes are done.
+ */
+static void bfin_otp_deinit_timing(u32 timing)
+{
+ /* mask bits [31:15] so that any attempts to write fail */
+ bfrom_OtpCommand(OTP_CLOSE, 0);
+ bfrom_OtpCommand(OTP_INIT, timing & ~(-1 << 15));
+ bfrom_OtpCommand(OTP_CLOSE, 0);
+}
+
/**
- * bfin_otp_write - Write OTP pages
+ * bfin_otp_write - write OTP pages
*
* All writes must be in half page chunks (half page == 64 bits).
*/
static ssize_t bfin_otp_write(struct file *filp, const char __user *buff, size_t count, loff_t *pos)
{
- stampit();
+ ssize_t bytes_done;
+ u32 timing, page, base_flags, flags, ret;
+ u64 content;
+
+ if (!allow_writes)
+ return -EACCES;
if (count % sizeof(u64))
return -EMSGSIZE;
if (mutex_lock_interruptible(&bfin_otp_lock))
return -ERESTARTSYS;
- /* need otp_init() documentation before this can be implemented */
+ stampit();
+
+ timing = bfin_otp_init_timing();
+ if (timing == 0) {
+ mutex_unlock(&bfin_otp_lock);
+ return -EIO;
+ }
+
+ base_flags = OTP_CHECK_FOR_PREV_WRITE;
+
+ bytes_done = 0;
+ page = *pos / (sizeof(u64) * 2);
+ while (bytes_done < count) {
+ flags = base_flags | (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF);
+ stamp("processing page %i (0x%x:%s) from %p", page, flags,
+ (flags & OTP_UPPER_HALF ? "upper" : "lower"), buff + bytes_done);
+ if (copy_from_user(&content, buff + bytes_done, sizeof(content))) {
+ bytes_done = -EFAULT;
+ break;
+ }
+ ret = bfrom_OtpWrite(page, flags, &content);
+ if (ret & OTP_MASTER_ERROR) {
+ stamp("error from otp: 0x%x", ret);
+ bytes_done = -EIO;
+ break;
+ }
+ if (flags & OTP_UPPER_HALF)
+ ++page;
+ bytes_done += sizeof(content);
+ *pos += sizeof(content);
+ }
+
+ bfin_otp_deinit_timing(timing);
mutex_unlock(&bfin_otp_lock);
+ return bytes_done;
+}
+
+static long bfin_otp_ioctl(struct file *filp, unsigned cmd, unsigned long arg)
+{
+ stampit();
+
+ switch (cmd) {
+ case OTPLOCK: {
+ u32 timing;
+ int ret = -EIO;
+
+ if (!allow_writes)
+ return -EACCES;
+
+ if (mutex_lock_interruptible(&bfin_otp_lock))
+ return -ERESTARTSYS;
+
+ timing = bfin_otp_init_timing();
+ if (timing) {
+ u32 otp_result = bfrom_OtpWrite(arg, OTP_LOCK, NULL);
+ stamp("locking page %lu resulted in 0x%x", arg, otp_result);
+ if (!(otp_result & OTP_MASTER_ERROR))
+ ret = 0;
+
+ bfin_otp_deinit_timing(timing);
+ }
+
+ mutex_unlock(&bfin_otp_lock);
+
+ return ret;
+ }
+
+ case MEMLOCK:
+ allow_writes = false;
+ return 0;
+
+ case MEMUNLOCK:
+ allow_writes = true;
+ return 0;
+ }
+
return -EINVAL;
}
#else
# define bfin_otp_write NULL
+# define bfin_otp_ioctl NULL
#endif
static struct file_operations bfin_otp_fops = {
- .owner = THIS_MODULE,
- .read = bfin_otp_read,
- .write = bfin_otp_write,
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = bfin_otp_ioctl,
+ .read = bfin_otp_read,
+ .write = bfin_otp_write,
};
static struct miscdevice bfin_otp_misc_device = {
unsigned long m, t;
t = devp->hd_ireqfreq;
- m = read_counter(&devp->hd_hpet->hpet_mc);
- write_counter(t + m + devp->hd_hpets->hp_delta,
- &devp->hd_timer->hpet_compare);
+ m = read_counter(&devp->hd_timer->hpet_compare);
+ write_counter(t + m, &devp->hd_timer->hpet_compare);
}
if (devp->hd_flags & HPET_SHARED_IRQ)
g = v | Tn_32MODE_CNF_MASK | Tn_INT_ENB_CNF_MASK;
if (devp->hd_flags & HPET_PERIODIC) {
- write_counter(t, &timer->hpet_compare);
g |= Tn_TYPE_CNF_MASK;
- v |= Tn_TYPE_CNF_MASK;
- writeq(v, &timer->hpet_config);
- v |= Tn_VAL_SET_CNF_MASK;
+ v |= Tn_TYPE_CNF_MASK | Tn_VAL_SET_CNF_MASK;
writeq(v, &timer->hpet_config);
local_irq_save(flags);
- /* NOTE: what we modify here is a hidden accumulator
+ /*
+ * NOTE: First we modify the hidden accumulator
* register supported by periodic-capable comparators.
* We never want to modify the (single) counter; that
- * would affect all the comparators.
+ * would affect all the comparators. The value written
+ * is the counter value when the first interrupt is due.
*/
m = read_counter(&hpet->hpet_mc);
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
+ /*
+ * Then we modify the comparator, indicating the period
+ * for subsequent interrupt.
+ */
+ write_counter(t, &timer->hpet_compare);
} else {
local_irq_save(flags);
m = read_counter(&hpet->hpet_mc);
EXPORT_SYMBOL_GPL(hvc_poll);
/**
- * hvc_resize() - Update terminal window size information.
+ * __hvc_resize() - Update terminal window size information.
* @hp: HVC console pointer
* @ws: Terminal window size structure
*
*
* Locking: Locking free; the function MUST be called holding hp->lock
*/
-void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+void __hvc_resize(struct hvc_struct *hp, struct winsize ws)
{
hp->ws = ws;
schedule_work(&hp->tty_resize);
}
-EXPORT_SYMBOL_GPL(hvc_resize);
+EXPORT_SYMBOL_GPL(__hvc_resize);
/*
* This kthread is either polling or interrupt driven. This is determined by
#define HVC_CONSOLE_H
#include <linux/kref.h>
#include <linux/tty.h>
+#include <linux/spinlock.h>
/*
* This is the max number of console adapters that can/will be found as
void hvc_kick(void);
/* Resize hvc tty terminal window */
-extern void hvc_resize(struct hvc_struct *hp, struct winsize ws);
+extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws);
+
+static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hp->lock, flags);
+ __hvc_resize(hp, ws);
+ spin_unlock_irqrestore(&hp->lock, flags);
+}
/* default notifier for irq based notification */
extern int notifier_add_irq(struct hvc_struct *hp, int data);
case MSG_TYPE_WINSIZE:
if (rb->mbuf->datalen != sizeof(struct winsize))
break;
- hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
+ /* The caller must ensure that the hvc is locked, which
+ * is the case when called from hvc_iucv_get_chars() */
+ __hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
break;
case MSG_TYPE_ERROR: /* ignored ... */
if (chunk > PAGE_SIZE)
chunk = PAGE_SIZE; /* Just for latency reasons */
- unwritten = clear_user(buf, chunk);
+ unwritten = __clear_user(buf, chunk);
written += chunk - unwritten;
if (unwritten)
break;
case IOCTL_MW_REGISTER_IPC: {
unsigned int ipcnum = (unsigned int) ioarg;
- PRINTK_3(TRACE_MWAVE,
- "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
- " ipcnum %x entry usIntCount %x\n",
- ipcnum,
- pDrvData->IPCs[ipcnum].usIntCount);
-
if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_ioctl:"
ipcnum);
return -EINVAL;
}
+ PRINTK_3(TRACE_MWAVE,
+ "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
+ " ipcnum %x entry usIntCount %x\n",
+ ipcnum,
+ pDrvData->IPCs[ipcnum].usIntCount);
+
lock_kernel();
pDrvData->IPCs[ipcnum].bIsHere = FALSE;
pDrvData->IPCs[ipcnum].bIsEnabled = TRUE;
case IOCTL_MW_GET_IPC: {
unsigned int ipcnum = (unsigned int) ioarg;
- PRINTK_3(TRACE_MWAVE,
- "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
- " ipcnum %x, usIntCount %x\n",
- ipcnum,
- pDrvData->IPCs[ipcnum].usIntCount);
if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_ioctl:"
" Invalid ipcnum %x\n", ipcnum);
return -EINVAL;
}
+ PRINTK_3(TRACE_MWAVE,
+ "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
+ " ipcnum %x, usIntCount %x\n",
+ ipcnum,
+ pDrvData->IPCs[ipcnum].usIntCount);
lock_kernel();
if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
* as an ASCII string in the standard UUID format. If accesses via the
* sysctl system call, it is returned as 16 bytes of binary data.
*/
-static int proc_do_uuid(ctl_table *table, int write, struct file *filp,
+static int proc_do_uuid(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
ctl_table fake_table;
fake_table.data = buf;
fake_table.maxlen = sizeof(buf);
- return proc_dostring(&fake_table, write, filp, buffer, lenp, ppos);
+ return proc_dostring(&fake_table, write, buffer, lenp, ppos);
}
static int uuid_strategy(ctl_table *table,
/*
** It is important that the product code is an unsigned object!
*/
- if (DownLoad.ProductCode > MAX_PRODUCT) {
+ if (DownLoad.ProductCode >= MAX_PRODUCT) {
rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Bad product code %d passed\n", DownLoad.ProductCode);
p->RIOError.Error = NO_SUCH_PRODUCT;
return -ENXIO;
* the module usage count.
*/
#define TPM_ORD_PCR_EXTEND cpu_to_be32(20)
-#define EXTEND_PCR_SIZE 34
+#define EXTEND_PCR_RESULT_SIZE 34
static struct tpm_input_header pcrextend_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(34),
return -ENODEV;
cmd.header.in = pcrextend_header;
- BUG_ON(be32_to_cpu(cmd.header.in.length) > EXTEND_PCR_SIZE);
cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(pcr_idx);
memcpy(cmd.params.pcrextend_in.hash, hash, TPM_DIGEST_SIZE);
- rc = transmit_cmd(chip, &cmd, cmd.header.in.length,
+ rc = transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE,
"attempting extend a PCR value");
module_put(chip->dev->driver->owner);
--- /dev/null
+/*
+ * Timer device implementation for SGI UV platform.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2009 Silicon Graphics, Inc. All rights reserved.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mmtimer.h>
+#include <linux/miscdevice.h>
+#include <linux/posix-timers.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/math64.h>
+#include <linux/smp_lock.h>
+
+#include <asm/genapic.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
+
+MODULE_AUTHOR("Dimitri Sivanich <sivanich@sgi.com>");
+MODULE_DESCRIPTION("SGI UV Memory Mapped RTC Timer");
+MODULE_LICENSE("GPL");
+
+/* name of the device, usually in /dev */
+#define UV_MMTIMER_NAME "mmtimer"
+#define UV_MMTIMER_DESC "SGI UV Memory Mapped RTC Timer"
+#define UV_MMTIMER_VERSION "1.0"
+
+static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg);
+static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma);
+
+/*
+ * Period in femtoseconds (10^-15 s)
+ */
+static unsigned long uv_mmtimer_femtoperiod;
+
+static const struct file_operations uv_mmtimer_fops = {
+ .owner = THIS_MODULE,
+ .mmap = uv_mmtimer_mmap,
+ .unlocked_ioctl = uv_mmtimer_ioctl,
+};
+
+/**
+ * uv_mmtimer_ioctl - ioctl interface for /dev/uv_mmtimer
+ * @file: file structure for the device
+ * @cmd: command to execute
+ * @arg: optional argument to command
+ *
+ * Executes the command specified by @cmd. Returns 0 for success, < 0 for
+ * failure.
+ *
+ * Valid commands:
+ *
+ * %MMTIMER_GETOFFSET - Should return the offset (relative to the start
+ * of the page where the registers are mapped) for the counter in question.
+ *
+ * %MMTIMER_GETRES - Returns the resolution of the clock in femto (10^-15)
+ * seconds
+ *
+ * %MMTIMER_GETFREQ - Copies the frequency of the clock in Hz to the address
+ * specified by @arg
+ *
+ * %MMTIMER_GETBITS - Returns the number of bits in the clock's counter
+ *
+ * %MMTIMER_MMAPAVAIL - Returns 1 if registers can be mmap'd into userspace
+ *
+ * %MMTIMER_GETCOUNTER - Gets the current value in the counter and places it
+ * in the address specified by @arg.
+ */
+static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret = 0;
+
+ switch (cmd) {
+ case MMTIMER_GETOFFSET: /* offset of the counter */
+ /*
+ * UV RTC register is on its own page
+ */
+ if (PAGE_SIZE <= (1 << 16))
+ ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1))
+ / 8;
+ else
+ ret = -ENOSYS;
+ break;
+
+ case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */
+ if (copy_to_user((unsigned long __user *)arg,
+ &uv_mmtimer_femtoperiod, sizeof(unsigned long)))
+ ret = -EFAULT;
+ break;
+
+ case MMTIMER_GETFREQ: /* frequency in Hz */
+ if (copy_to_user((unsigned long __user *)arg,
+ &sn_rtc_cycles_per_second,
+ sizeof(unsigned long)))
+ ret = -EFAULT;
+ break;
+
+ case MMTIMER_GETBITS: /* number of bits in the clock */
+ ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK);
+ break;
+
+ case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */
+ ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0;
+ break;
+
+ case MMTIMER_GETCOUNTER:
+ if (copy_to_user((unsigned long __user *)arg,
+ (unsigned long *)uv_local_mmr_address(UVH_RTC),
+ sizeof(unsigned long)))
+ ret = -EFAULT;
+ break;
+ default:
+ ret = -ENOTTY;
+ break;
+ }
+ return ret;
+}
+
+/**
+ * uv_mmtimer_mmap - maps the clock's registers into userspace
+ * @file: file structure for the device
+ * @vma: VMA to map the registers into
+ *
+ * Calls remap_pfn_range() to map the clock's registers into
+ * the calling process' address space.
+ */
+static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ unsigned long uv_mmtimer_addr;
+
+ if (vma->vm_end - vma->vm_start != PAGE_SIZE)
+ return -EINVAL;
+
+ if (vma->vm_flags & VM_WRITE)
+ return -EPERM;
+
+ if (PAGE_SIZE > (1 << 16))
+ return -ENOSYS;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ uv_mmtimer_addr = UV_LOCAL_MMR_BASE | UVH_RTC;
+ uv_mmtimer_addr &= ~(PAGE_SIZE - 1);
+ uv_mmtimer_addr &= 0xfffffffffffffffUL;
+
+ if (remap_pfn_range(vma, vma->vm_start, uv_mmtimer_addr >> PAGE_SHIFT,
+ PAGE_SIZE, vma->vm_page_prot)) {
+ printk(KERN_ERR "remap_pfn_range failed in uv_mmtimer_mmap\n");
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+static struct miscdevice uv_mmtimer_miscdev = {
+ MISC_DYNAMIC_MINOR,
+ UV_MMTIMER_NAME,
+ &uv_mmtimer_fops
+};
+
+
+/**
+ * uv_mmtimer_init - device initialization routine
+ *
+ * Does initial setup for the uv_mmtimer device.
+ */
+static int __init uv_mmtimer_init(void)
+{
+ if (!is_uv_system()) {
+ printk(KERN_ERR "%s: Hardware unsupported\n", UV_MMTIMER_NAME);
+ return -1;
+ }
+
+ /*
+ * Sanity check the cycles/sec variable
+ */
+ if (sn_rtc_cycles_per_second < 100000) {
+ printk(KERN_ERR "%s: unable to determine clock frequency\n",
+ UV_MMTIMER_NAME);
+ return -1;
+ }
+
+ uv_mmtimer_femtoperiod = ((unsigned long)1E15 +
+ sn_rtc_cycles_per_second / 2) /
+ sn_rtc_cycles_per_second;
+
+ if (misc_register(&uv_mmtimer_miscdev)) {
+ printk(KERN_ERR "%s: failed to register device\n",
+ UV_MMTIMER_NAME);
+ return -1;
+ }
+
+ printk(KERN_INFO "%s: v%s, %ld MHz\n", UV_MMTIMER_DESC,
+ UV_MMTIMER_VERSION,
+ sn_rtc_cycles_per_second/(unsigned long)1E6);
+
+ return 0;
+}
+
+module_init(uv_mmtimer_init);
#include <linux/device.h>
#include <linux/dca.h>
-#define DCA_VERSION "1.8"
+#define DCA_VERSION "1.12.1"
MODULE_VERSION(DCA_VERSION);
MODULE_LICENSE("GPL");
static DEFINE_SPINLOCK(dca_lock);
-static LIST_HEAD(dca_providers);
+static LIST_HEAD(dca_domains);
-static struct dca_provider *dca_find_provider_by_dev(struct device *dev)
+static struct pci_bus *dca_pci_rc_from_dev(struct device *dev)
{
- struct dca_provider *dca, *ret = NULL;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_bus *bus = pdev->bus;
- list_for_each_entry(dca, &dca_providers, node) {
- if ((!dev) || (dca->ops->dev_managed(dca, dev))) {
- ret = dca;
- break;
- }
+ while (bus->parent)
+ bus = bus->parent;
+
+ return bus;
+}
+
+static struct dca_domain *dca_allocate_domain(struct pci_bus *rc)
+{
+ struct dca_domain *domain;
+
+ domain = kzalloc(sizeof(*domain), GFP_NOWAIT);
+ if (!domain)
+ return NULL;
+
+ INIT_LIST_HEAD(&domain->dca_providers);
+ domain->pci_rc = rc;
+
+ return domain;
+}
+
+static void dca_free_domain(struct dca_domain *domain)
+{
+ list_del(&domain->node);
+ kfree(domain);
+}
+
+static struct dca_domain *dca_find_domain(struct pci_bus *rc)
+{
+ struct dca_domain *domain;
+
+ list_for_each_entry(domain, &dca_domains, node)
+ if (domain->pci_rc == rc)
+ return domain;
+
+ return NULL;
+}
+
+static struct dca_domain *dca_get_domain(struct device *dev)
+{
+ struct pci_bus *rc;
+ struct dca_domain *domain;
+
+ rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(rc);
+
+ if (!domain) {
+ domain = dca_allocate_domain(rc);
+ if (domain)
+ list_add(&domain->node, &dca_domains);
+ }
+
+ return domain;
+}
+
+static struct dca_provider *dca_find_provider_by_dev(struct device *dev)
+{
+ struct dca_provider *dca;
+ struct pci_bus *rc;
+ struct dca_domain *domain;
+
+ if (dev) {
+ rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(rc);
+ if (!domain)
+ return NULL;
+ } else {
+ if (!list_empty(&dca_domains))
+ domain = list_first_entry(&dca_domains,
+ struct dca_domain,
+ node);
+ else
+ return NULL;
}
- return ret;
+ list_for_each_entry(dca, &domain->dca_providers, node)
+ if ((!dev) || (dca->ops->dev_managed(dca, dev)))
+ return dca;
+
+ return NULL;
}
/**
struct dca_provider *dca;
int err, slot = -ENODEV;
unsigned long flags;
+ struct pci_bus *pci_rc;
+ struct dca_domain *domain;
if (!dev)
return -EFAULT;
return -EEXIST;
}
- list_for_each_entry(dca, &dca_providers, node) {
+ pci_rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(pci_rc);
+ if (!domain) {
+ spin_unlock_irqrestore(&dca_lock, flags);
+ return -ENODEV;
+ }
+
+ list_for_each_entry(dca, &domain->dca_providers, node) {
slot = dca->ops->add_requester(dca, dev);
if (slot >= 0)
break;
{
int err;
unsigned long flags;
+ struct dca_domain *domain;
err = dca_sysfs_add_provider(dca, dev);
if (err)
return err;
spin_lock_irqsave(&dca_lock, flags);
- list_add(&dca->node, &dca_providers);
+ domain = dca_get_domain(dev);
+ if (!domain) {
+ spin_unlock_irqrestore(&dca_lock, flags);
+ return -ENODEV;
+ }
+ list_add(&dca->node, &domain->dca_providers);
spin_unlock_irqrestore(&dca_lock, flags);
blocking_notifier_call_chain(&dca_provider_chain,
* unregister_dca_provider - remove a dca provider
* @dca - struct created by alloc_dca_provider()
*/
-void unregister_dca_provider(struct dca_provider *dca)
+void unregister_dca_provider(struct dca_provider *dca, struct device *dev)
{
unsigned long flags;
+ struct pci_bus *pci_rc;
+ struct dca_domain *domain;
blocking_notifier_call_chain(&dca_provider_chain,
DCA_PROVIDER_REMOVE, NULL);
spin_lock_irqsave(&dca_lock, flags);
+
list_del(&dca->node);
+
+ pci_rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(pci_rc);
+ if (list_empty(&domain->dca_providers))
+ dca_free_domain(domain);
+
spin_unlock_irqrestore(&dca_lock, flags);
dca_sysfs_remove_provider(dca);
static int __init dca_init(void)
{
- printk(KERN_ERR "dca service started, version %s\n", DCA_VERSION);
+ pr_info("dca service started, version %s\n", DCA_VERSION);
return dca_sysfs_init();
}
comment "DMA Devices"
+config ASYNC_TX_DISABLE_CHANNEL_SWITCH
+ bool
+
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86
select DMA_ENGINE
select DCA
+ select ASYNC_TX_DISABLE_CHANNEL_SWITCH
help
Enable support for the Intel(R) I/OAT DMA engine present
in recent Intel Xeon chipsets.
Support the TXx9 SoC internal DMA controller. This can be
integrated in chips such as the Toshiba TX4927/38/39.
+config SH_DMAE
+ tristate "Renesas SuperH DMAC support"
+ depends on SUPERH && SH_DMA
+ depends on !SH_DMA_API
+ select DMA_ENGINE
+ help
+ Enable support for the Renesas SuperH DMA controllers.
+
config DMA_ENGINE
bool
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
- depends on DMA_ENGINE && !HIGHMEM64G
+ depends on DMA_ENGINE
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
obj-$(CONFIG_NET_DMA) += iovlock.o
obj-$(CONFIG_DMATEST) += dmatest.o
-obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
-ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
+obj-$(CONFIG_INTEL_IOATDMA) += ioat/
obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
+obj-$(CONFIG_SH_DMAE) += shdma.o
desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
if (desc) {
memset(desc, 0, sizeof(struct at_desc));
+ INIT_LIST_HEAD(&desc->tx_list);
dma_async_tx_descriptor_init(&desc->txd, chan);
/* txd.flags will be overwritten in prep functions */
desc->txd.flags = DMA_CTRL_ACK;
struct at_desc *child;
spin_lock_bh(&atchan->lock);
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&atchan->chan_common),
"moving child desc %p to freelist\n",
child);
- list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+ list_splice_init(&desc->tx_list, &atchan->free_list);
dev_vdbg(chan2dev(&atchan->chan_common),
"moving desc %p to freelist\n", desc);
list_add(&desc->desc_node, &atchan->free_list);
param = txd->callback_param;
/* move children to free_list */
- list_splice_init(&txd->tx_list, &atchan->free_list);
+ list_splice_init(&desc->tx_list, &atchan->free_list);
/* move myself to free_list */
list_move(&desc->desc_node, &atchan->free_list);
/* unmap dma addresses */
- if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
- dma_unmap_single(chan2parent(&atchan->chan_common),
- desc->lli.daddr,
- desc->len, DMA_FROM_DEVICE);
- else
- dma_unmap_page(chan2parent(&atchan->chan_common),
- desc->lli.daddr,
- desc->len, DMA_FROM_DEVICE);
- }
- if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
- dma_unmap_single(chan2parent(&atchan->chan_common),
- desc->lli.saddr,
- desc->len, DMA_TO_DEVICE);
- else
- dma_unmap_page(chan2parent(&atchan->chan_common),
- desc->lli.saddr,
- desc->len, DMA_TO_DEVICE);
+ if (!atchan->chan_common.private) {
+ struct device *parent = chan2parent(&atchan->chan_common);
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(parent,
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(parent,
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ }
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(parent,
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(parent,
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ }
}
/*
/* This one is currently in progress */
return;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
if (!(child->lli.ctrla & ATC_DONE))
/* Currently in progress */
return;
dev_crit(chan2dev(&atchan->chan_common),
" cookie: %d\n", bad_desc->txd.cookie);
atc_dump_lli(atchan, &bad_desc->lli);
- list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &bad_desc->tx_list, desc_node)
atc_dump_lli(atchan, &child->lli);
/* Pretend the descriptor completed successfully */
prev->lli.dscr = desc->txd.phys;
/* insert the link descriptor to the LD ring */
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
}
reg_width = atslave->reg_width;
- sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
-
ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
prev->lli.dscr = desc->txd.phys;
/* insert the link descriptor to the LD ring */
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
prev->lli.dscr = desc->txd.phys;
/* insert the link descriptor to the LD ring */
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
struct at_lli lli;
/* THEN values for driver housekeeping */
+ struct list_head tx_list;
struct dma_async_tx_descriptor txd;
struct list_head desc_node;
size_t len;
}
EXPORT_SYMBOL(dmaengine_put);
+static bool device_has_all_tx_types(struct dma_device *device)
+{
+ /* A device that satisfies this test has channels that will never cause
+ * an async_tx channel switch event as all possible operation types can
+ * be handled.
+ */
+ #ifdef CONFIG_ASYNC_TX_DMA
+ if (!dma_has_cap(DMA_INTERRUPT, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_MEMCPY) || defined(CONFIG_ASYNC_MEMCPY_MODULE)
+ if (!dma_has_cap(DMA_MEMCPY, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_MEMSET) || defined(CONFIG_ASYNC_MEMSET_MODULE)
+ if (!dma_has_cap(DMA_MEMSET, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_XOR) || defined(CONFIG_ASYNC_XOR_MODULE)
+ if (!dma_has_cap(DMA_XOR, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_PQ) || defined(CONFIG_ASYNC_PQ_MODULE)
+ if (!dma_has_cap(DMA_PQ, device->cap_mask))
+ return false;
+ #endif
+
+ return true;
+}
+
static int get_dma_id(struct dma_device *device)
{
int rc;
!device->device_prep_dma_memcpy);
BUG_ON(dma_has_cap(DMA_XOR, device->cap_mask) &&
!device->device_prep_dma_xor);
- BUG_ON(dma_has_cap(DMA_ZERO_SUM, device->cap_mask) &&
- !device->device_prep_dma_zero_sum);
+ BUG_ON(dma_has_cap(DMA_XOR_VAL, device->cap_mask) &&
+ !device->device_prep_dma_xor_val);
+ BUG_ON(dma_has_cap(DMA_PQ, device->cap_mask) &&
+ !device->device_prep_dma_pq);
+ BUG_ON(dma_has_cap(DMA_PQ_VAL, device->cap_mask) &&
+ !device->device_prep_dma_pq_val);
BUG_ON(dma_has_cap(DMA_MEMSET, device->cap_mask) &&
!device->device_prep_dma_memset);
BUG_ON(dma_has_cap(DMA_INTERRUPT, device->cap_mask) &&
BUG_ON(!device->device_issue_pending);
BUG_ON(!device->dev);
+ /* note: this only matters in the
+ * CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y case
+ */
+ if (device_has_all_tx_types(device))
+ dma_cap_set(DMA_ASYNC_TX, device->cap_mask);
+
idr_ref = kmalloc(sizeof(*idr_ref), GFP_KERNEL);
if (!idr_ref)
return -ENOMEM;
{
tx->chan = chan;
spin_lock_init(&tx->lock);
- INIT_LIST_HEAD(&tx->tx_list);
}
EXPORT_SYMBOL(dma_async_tx_descriptor_init);
/* dma_wait_for_async_tx - spin wait for a transaction to complete
* @tx: in-flight transaction to wait on
- *
- * This routine assumes that tx was obtained from a call to async_memcpy,
- * async_xor, async_memset, etc which ensures that tx is "in-flight" (prepped
- * and submitted). Walking the parent chain is only meant to cover for DMA
- * drivers that do not implement the DMA_INTERRUPT capability and may race with
- * the driver's descriptor cleanup routine.
*/
enum dma_status
dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
{
- enum dma_status status;
- struct dma_async_tx_descriptor *iter;
- struct dma_async_tx_descriptor *parent;
+ unsigned long dma_sync_wait_timeout = jiffies + msecs_to_jiffies(5000);
if (!tx)
return DMA_SUCCESS;
- WARN_ONCE(tx->parent, "%s: speculatively walking dependency chain for"
- " %s\n", __func__, dma_chan_name(tx->chan));
-
- /* poll through the dependency chain, return when tx is complete */
- do {
- iter = tx;
-
- /* find the root of the unsubmitted dependency chain */
- do {
- parent = iter->parent;
- if (!parent)
- break;
- else
- iter = parent;
- } while (parent);
-
- /* there is a small window for ->parent == NULL and
- * ->cookie == -EBUSY
- */
- while (iter->cookie == -EBUSY)
- cpu_relax();
-
- status = dma_sync_wait(iter->chan, iter->cookie);
- } while (status == DMA_IN_PROGRESS || (iter != tx));
-
- return status;
+ while (tx->cookie == -EBUSY) {
+ if (time_after_eq(jiffies, dma_sync_wait_timeout)) {
+ pr_err("%s timeout waiting for descriptor submission\n",
+ __func__);
+ return DMA_ERROR;
+ }
+ cpu_relax();
+ }
+ return dma_sync_wait(tx->chan, tx->cookie);
}
EXPORT_SYMBOL_GPL(dma_wait_for_async_tx);
MODULE_PARM_DESC(xor_sources,
"Number of xor source buffers (default: 3)");
+static unsigned int pq_sources = 3;
+module_param(pq_sources, uint, S_IRUGO);
+MODULE_PARM_DESC(pq_sources,
+ "Number of p+q source buffers (default: 3)");
+
/*
* Initialization patterns. All bytes in the source buffer has bit 7
* set, all bytes in the destination buffer has bit 7 cleared.
dma_cookie_t cookie;
enum dma_status status;
enum dma_ctrl_flags flags;
+ u8 pq_coefs[pq_sources];
int ret;
int src_cnt;
int dst_cnt;
else if (thread->type == DMA_XOR) {
src_cnt = xor_sources | 1; /* force odd to ensure dst = src */
dst_cnt = 1;
+ } else if (thread->type == DMA_PQ) {
+ src_cnt = pq_sources | 1; /* force odd to ensure dst = src */
+ dst_cnt = 2;
+ for (i = 0; i < pq_sources; i++)
+ pq_coefs[i] = 1;
} else
goto err_srcs;
dma_addr_t dma_dsts[dst_cnt];
struct completion cmp;
unsigned long tmo = msecs_to_jiffies(3000);
+ u8 align = 0;
total_tests++;
src_off = dmatest_random() % (test_buf_size - len + 1);
dst_off = dmatest_random() % (test_buf_size - len + 1);
+ /* honor alignment restrictions */
+ if (thread->type == DMA_MEMCPY)
+ align = dev->copy_align;
+ else if (thread->type == DMA_XOR)
+ align = dev->xor_align;
+ else if (thread->type == DMA_PQ)
+ align = dev->pq_align;
+
+ len = (len >> align) << align;
+ src_off = (src_off >> align) << align;
+ dst_off = (dst_off >> align) << align;
+
dmatest_init_srcs(thread->srcs, src_off, len);
dmatest_init_dsts(thread->dsts, dst_off, len);
DMA_BIDIRECTIONAL);
}
+
if (thread->type == DMA_MEMCPY)
tx = dev->device_prep_dma_memcpy(chan,
dma_dsts[0] + dst_off,
dma_dsts[0] + dst_off,
dma_srcs, xor_sources,
len, flags);
+ else if (thread->type == DMA_PQ) {
+ dma_addr_t dma_pq[dst_cnt];
+
+ for (i = 0; i < dst_cnt; i++)
+ dma_pq[i] = dma_dsts[i] + dst_off;
+ tx = dev->device_prep_dma_pq(chan, dma_pq, dma_srcs,
+ pq_sources, pq_coefs,
+ len, flags);
+ }
if (!tx) {
for (i = 0; i < src_cnt; i++)
op = "copy";
else if (type == DMA_XOR)
op = "xor";
+ else if (type == DMA_PQ)
+ op = "pq";
else
return -EINVAL;
cnt = dmatest_add_threads(dtc, DMA_XOR);
thread_count += cnt > 0 ? cnt : 0;
}
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
+ cnt = dmatest_add_threads(dtc, DMA_PQ);
+ thread_count += cnt > 0 ?: 0;
+ }
pr_info("dmatest: Started %u threads using %s\n",
thread_count, dma_chan_name(chan));
{
struct dw_desc *child;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dma_sync_single_for_cpu(chan2parent(&dwc->chan),
child->txd.phys, sizeof(child->lli),
DMA_TO_DEVICE);
dwc_sync_desc_for_cpu(dwc, desc);
spin_lock_bh(&dwc->lock);
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&dwc->chan),
"moving child desc %p to freelist\n",
child);
- list_splice_init(&desc->txd.tx_list, &dwc->free_list);
+ list_splice_init(&desc->tx_list, &dwc->free_list);
dev_vdbg(chan2dev(&dwc->chan), "moving desc %p to freelist\n", desc);
list_add(&desc->desc_node, &dwc->free_list);
spin_unlock_bh(&dwc->lock);
param = txd->callback_param;
dwc_sync_desc_for_cpu(dwc, desc);
- list_splice_init(&txd->tx_list, &dwc->free_list);
+ list_splice_init(&desc->tx_list, &dwc->free_list);
list_move(&desc->desc_node, &dwc->free_list);
- /*
- * We use dma_unmap_page() regardless of how the buffers were
- * mapped before they were submitted...
- */
- if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP))
- dma_unmap_page(chan2parent(&dwc->chan), desc->lli.dar,
- desc->len, DMA_FROM_DEVICE);
- if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP))
- dma_unmap_page(chan2parent(&dwc->chan), desc->lli.sar,
- desc->len, DMA_TO_DEVICE);
+ if (!dwc->chan.private) {
+ struct device *parent = chan2parent(&dwc->chan);
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(parent, desc->lli.dar,
+ desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(parent, desc->lli.dar,
+ desc->len, DMA_FROM_DEVICE);
+ }
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(parent, desc->lli.sar,
+ desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(parent, desc->lli.sar,
+ desc->len, DMA_TO_DEVICE);
+ }
+ }
/*
* The API requires that no submissions are done from a
/* This one is currently in progress */
return;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
if (child->lli.llp == llp)
/* Currently in progress */
return;
dev_printk(KERN_CRIT, chan2dev(&dwc->chan),
" cookie: %d\n", bad_desc->txd.cookie);
dwc_dump_lli(dwc, &bad_desc->lli);
- list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &bad_desc->tx_list, desc_node)
dwc_dump_lli(dwc, &child->lli);
/* Pretend the descriptor completed successfully */
prev->txd.phys, sizeof(prev->lli),
DMA_TO_DEVICE);
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
}
reg_width = dws->reg_width;
prev = first = NULL;
- sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
-
switch (direction) {
case DMA_TO_DEVICE:
ctllo = (DWC_DEFAULT_CTLLO
sizeof(prev->lli),
DMA_TO_DEVICE);
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
sizeof(prev->lli),
DMA_TO_DEVICE);
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
break;
}
+ INIT_LIST_HEAD(&desc->tx_list);
dma_async_tx_descriptor_init(&desc->txd, chan);
desc->txd.tx_submit = dwc_tx_submit;
desc->txd.flags = DMA_CTRL_ACK;
/* THEN values for driver housekeeping */
struct list_head desc_node;
+ struct list_head tx_list;
struct dma_async_tx_descriptor txd;
size_t len;
};
#include <linux/dmapool.h>
#include <linux/of_platform.h>
+#include <asm/fsldma.h>
#include "fsldma.h"
static void dma_init(struct fsl_dma_chan *fsl_chan)
}
/**
- * fsl_chan_toggle_ext_pause - Toggle channel external pause status
+ * fsl_chan_set_request_count - Set DMA Request Count for external control
* @fsl_chan : Freescale DMA channel
- * @size : Pause control size, 0 for disable external pause control.
- * The maximum is 1024.
+ * @size : Number of bytes to transfer in a single request
+ *
+ * The Freescale DMA channel can be controlled by the external signal DREQ#.
+ * The DMA request count is how many bytes are allowed to transfer before
+ * pausing the channel, after which a new assertion of DREQ# resumes channel
+ * operation.
*
- * The Freescale DMA channel can be controlled by the external
- * signal DREQ#. The pause control size is how many bytes are allowed
- * to transfer before pausing the channel, after which a new assertion
- * of DREQ# resumes channel operation.
+ * A size of 0 disables external pause control. The maximum size is 1024.
*/
-static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int size)
+static void fsl_chan_set_request_count(struct fsl_dma_chan *fsl_chan, int size)
{
- if (size > 1024)
- return;
+ BUG_ON(size > 1024);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
+ | ((__ilog2(size) << 24) & 0x0f000000),
+ 32);
+}
- if (size) {
- DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
- DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
- | ((__ilog2(size) << 24) & 0x0f000000),
- 32);
+/**
+ * fsl_chan_toggle_ext_pause - Toggle channel external pause status
+ * @fsl_chan : Freescale DMA channel
+ * @enable : 0 is disabled, 1 is enabled.
+ *
+ * The Freescale DMA channel can be controlled by the external signal DREQ#.
+ * The DMA Request Count feature should be used in addition to this feature
+ * to set the number of bytes to transfer before pausing the channel.
+ */
+static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int enable)
+{
+ if (enable)
fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT;
- } else
+ else
fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT;
}
static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
- struct fsl_desc_sw *desc;
+ struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
+ struct fsl_desc_sw *child;
unsigned long flags;
dma_cookie_t cookie;
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
cookie = fsl_chan->common.cookie;
- list_for_each_entry(desc, &tx->tx_list, node) {
+ list_for_each_entry(child, &desc->tx_list, node) {
cookie++;
if (cookie < 0)
cookie = 1;
}
fsl_chan->common.cookie = cookie;
- append_ld_queue(fsl_chan, tx_to_fsl_desc(tx));
- list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev);
+ append_ld_queue(fsl_chan, desc);
+ list_splice_init(&desc->tx_list, fsl_chan->ld_queue.prev);
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
desc_sw = dma_pool_alloc(fsl_chan->desc_pool, GFP_ATOMIC, &pdesc);
if (desc_sw) {
memset(desc_sw, 0, sizeof(struct fsl_desc_sw));
+ INIT_LIST_HEAD(&desc_sw->tx_list);
dma_async_tx_descriptor_init(&desc_sw->async_tx,
&fsl_chan->common);
desc_sw->async_tx.tx_submit = fsl_dma_tx_submit;
new->async_tx.flags = flags;
/* Insert the link descriptor to the LD ring */
- list_add_tail(&new->node, &new->async_tx.tx_list);
+ list_add_tail(&new->node, &new->tx_list);
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
dma_dest += copy;
/* Insert the link descriptor to the LD ring */
- list_add_tail(&new->node, &first->async_tx.tx_list);
+ list_add_tail(&new->node, &first->tx_list);
} while (len);
new->async_tx.flags = flags; /* client is in control of this ack */
if (!first)
return NULL;
- list = &first->async_tx.tx_list;
+ list = &first->tx_list;
list_for_each_entry_safe_reverse(new, prev, list, node) {
list_del(&new->node);
dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
return NULL;
}
+/**
+ * fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: DMAEngine flags
+ *
+ * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the
+ * DMA_SLAVE API, this gets the device-specific information from the
+ * chan->private variable.
+ */
+static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_data_direction direction, unsigned long flags)
+{
+ struct fsl_dma_chan *fsl_chan;
+ struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
+ struct fsl_dma_slave *slave;
+ struct list_head *tx_list;
+ size_t copy;
+
+ int i;
+ struct scatterlist *sg;
+ size_t sg_used;
+ size_t hw_used;
+ struct fsl_dma_hw_addr *hw;
+ dma_addr_t dma_dst, dma_src;
+
+ if (!chan)
+ return NULL;
+
+ if (!chan->private)
+ return NULL;
+
+ fsl_chan = to_fsl_chan(chan);
+ slave = chan->private;
+
+ if (list_empty(&slave->addresses))
+ return NULL;
+
+ hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry);
+ hw_used = 0;
+
+ /*
+ * Build the hardware transaction to copy from the scatterlist to
+ * the hardware, or from the hardware to the scatterlist
+ *
+ * If you are copying from the hardware to the scatterlist and it
+ * takes two hardware entries to fill an entire page, then both
+ * hardware entries will be coalesced into the same page
+ *
+ * If you are copying from the scatterlist to the hardware and a
+ * single page can fill two hardware entries, then the data will
+ * be read out of the page into the first hardware entry, and so on
+ */
+ for_each_sg(sgl, sg, sg_len, i) {
+ sg_used = 0;
+
+ /* Loop until the entire scatterlist entry is used */
+ while (sg_used < sg_dma_len(sg)) {
+
+ /*
+ * If we've used up the current hardware address/length
+ * pair, we need to load a new one
+ *
+ * This is done in a while loop so that descriptors with
+ * length == 0 will be skipped
+ */
+ while (hw_used >= hw->length) {
+
+ /*
+ * If the current hardware entry is the last
+ * entry in the list, we're finished
+ */
+ if (list_is_last(&hw->entry, &slave->addresses))
+ goto finished;
+
+ /* Get the next hardware address/length pair */
+ hw = list_entry(hw->entry.next,
+ struct fsl_dma_hw_addr, entry);
+ hw_used = 0;
+ }
+
+ /* Allocate the link descriptor from DMA pool */
+ new = fsl_dma_alloc_descriptor(fsl_chan);
+ if (!new) {
+ dev_err(fsl_chan->dev, "No free memory for "
+ "link descriptor\n");
+ goto fail;
+ }
+#ifdef FSL_DMA_LD_DEBUG
+ dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
+#endif
+
+ /*
+ * Calculate the maximum number of bytes to transfer,
+ * making sure it is less than the DMA controller limit
+ */
+ copy = min_t(size_t, sg_dma_len(sg) - sg_used,
+ hw->length - hw_used);
+ copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT);
+
+ /*
+ * DMA_FROM_DEVICE
+ * from the hardware to the scatterlist
+ *
+ * DMA_TO_DEVICE
+ * from the scatterlist to the hardware
+ */
+ if (direction == DMA_FROM_DEVICE) {
+ dma_src = hw->address + hw_used;
+ dma_dst = sg_dma_address(sg) + sg_used;
+ } else {
+ dma_src = sg_dma_address(sg) + sg_used;
+ dma_dst = hw->address + hw_used;
+ }
+
+ /* Fill in the descriptor */
+ set_desc_cnt(fsl_chan, &new->hw, copy);
+ set_desc_src(fsl_chan, &new->hw, dma_src);
+ set_desc_dest(fsl_chan, &new->hw, dma_dst);
+
+ /*
+ * If this is not the first descriptor, chain the
+ * current descriptor after the previous descriptor
+ */
+ if (!first) {
+ first = new;
+ } else {
+ set_desc_next(fsl_chan, &prev->hw,
+ new->async_tx.phys);
+ }
+
+ new->async_tx.cookie = 0;
+ async_tx_ack(&new->async_tx);
+
+ prev = new;
+ sg_used += copy;
+ hw_used += copy;
+
+ /* Insert the link descriptor into the LD ring */
+ list_add_tail(&new->node, &first->tx_list);
+ }
+ }
+
+finished:
+
+ /* All of the hardware address/length pairs had length == 0 */
+ if (!first || !new)
+ return NULL;
+
+ new->async_tx.flags = flags;
+ new->async_tx.cookie = -EBUSY;
+
+ /* Set End-of-link to the last link descriptor of new list */
+ set_ld_eol(fsl_chan, new);
+
+ /* Enable extra controller features */
+ if (fsl_chan->set_src_loop_size)
+ fsl_chan->set_src_loop_size(fsl_chan, slave->src_loop_size);
+
+ if (fsl_chan->set_dest_loop_size)
+ fsl_chan->set_dest_loop_size(fsl_chan, slave->dst_loop_size);
+
+ if (fsl_chan->toggle_ext_start)
+ fsl_chan->toggle_ext_start(fsl_chan, slave->external_start);
+
+ if (fsl_chan->toggle_ext_pause)
+ fsl_chan->toggle_ext_pause(fsl_chan, slave->external_pause);
+
+ if (fsl_chan->set_request_count)
+ fsl_chan->set_request_count(fsl_chan, slave->request_count);
+
+ return &first->async_tx;
+
+fail:
+ /* If first was not set, then we failed to allocate the very first
+ * descriptor, and we're done */
+ if (!first)
+ return NULL;
+
+ /*
+ * First is set, so all of the descriptors we allocated have been added
+ * to first->tx_list, INCLUDING "first" itself. Therefore we
+ * must traverse the list backwards freeing each descriptor in turn
+ *
+ * We're re-using variables for the loop, oh well
+ */
+ tx_list = &first->tx_list;
+ list_for_each_entry_safe_reverse(new, prev, tx_list, node) {
+ list_del_init(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
+}
+
+static void fsl_dma_device_terminate_all(struct dma_chan *chan)
+{
+ struct fsl_dma_chan *fsl_chan;
+ struct fsl_desc_sw *desc, *tmp;
+ unsigned long flags;
+
+ if (!chan)
+ return;
+
+ fsl_chan = to_fsl_chan(chan);
+
+ /* Halt the DMA engine */
+ dma_halt(fsl_chan);
+
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
+ /* Remove and free all of the descriptors in the LD queue */
+ list_for_each_entry_safe(desc, tmp, &fsl_chan->ld_queue, node) {
+ list_del(&desc->node);
+ dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
+ }
+
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+}
+
/**
* fsl_dma_update_completed_cookie - Update the completed cookie.
* @fsl_chan : Freescale DMA channel
new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
+ new_fsl_chan->set_request_count = fsl_chan_set_request_count;
}
spin_lock_init(&new_fsl_chan->desc_lock);
dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt;
fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
fdev->common.device_is_tx_complete = fsl_dma_is_complete;
fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
+ fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg;
+ fdev->common.device_terminate_all = fsl_dma_device_terminate_all;
fdev->common.dev = &dev->dev;
fdev->irq = irq_of_parse_and_map(dev->node, 0);
struct fsl_desc_sw {
struct fsl_dma_ld_hw hw;
struct list_head node;
+ struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
struct list_head *ld;
void *priv;
struct tasklet_struct tasklet;
u32 feature;
- void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int size);
+ void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int enable);
void (*toggle_ext_start)(struct fsl_dma_chan *fsl_chan, int enable);
void (*set_src_loop_size)(struct fsl_dma_chan *fsl_chan, int size);
void (*set_dest_loop_size)(struct fsl_dma_chan *fsl_chan, int size);
+ void (*set_request_count)(struct fsl_dma_chan *fsl_chan, int size);
};
#define to_fsl_chan(chan) container_of(chan, struct fsl_dma_chan, common)
+++ /dev/null
-/*
- * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 - 2009 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- */
-
-/*
- * This driver supports an Intel I/OAT DMA engine, which does asynchronous
- * copy operations.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/dca.h>
-#include "ioatdma.h"
-#include "ioatdma_registers.h"
-#include "ioatdma_hw.h"
-
-MODULE_VERSION(IOAT_DMA_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Intel Corporation");
-
-static struct pci_device_id ioat_pci_tbl[] = {
- /* I/OAT v1 platforms */
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SCNB) },
- { PCI_DEVICE(PCI_VENDOR_ID_UNISYS, PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR) },
-
- /* I/OAT v2 platforms */
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB) },
-
- /* I/OAT v3 platforms */
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG1) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG2) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG3) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG4) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG5) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG6) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG7) },
- { 0, }
-};
-
-struct ioat_device {
- struct pci_dev *pdev;
- void __iomem *iobase;
- struct ioatdma_device *dma;
- struct dca_provider *dca;
-};
-
-static int __devinit ioat_probe(struct pci_dev *pdev,
- const struct pci_device_id *id);
-static void __devexit ioat_remove(struct pci_dev *pdev);
-
-static int ioat_dca_enabled = 1;
-module_param(ioat_dca_enabled, int, 0644);
-MODULE_PARM_DESC(ioat_dca_enabled, "control support of dca service (default: 1)");
-
-static struct pci_driver ioat_pci_driver = {
- .name = "ioatdma",
- .id_table = ioat_pci_tbl,
- .probe = ioat_probe,
- .remove = __devexit_p(ioat_remove),
-};
-
-static int __devinit ioat_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- void __iomem *iobase;
- struct ioat_device *device;
- unsigned long mmio_start, mmio_len;
- int err;
-
- err = pci_enable_device(pdev);
- if (err)
- goto err_enable_device;
-
- err = pci_request_regions(pdev, ioat_pci_driver.name);
- if (err)
- goto err_request_regions;
-
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- if (err)
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err)
- goto err_set_dma_mask;
-
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (err)
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err)
- goto err_set_dma_mask;
-
- mmio_start = pci_resource_start(pdev, 0);
- mmio_len = pci_resource_len(pdev, 0);
- iobase = ioremap(mmio_start, mmio_len);
- if (!iobase) {
- err = -ENOMEM;
- goto err_ioremap;
- }
-
- device = kzalloc(sizeof(*device), GFP_KERNEL);
- if (!device) {
- err = -ENOMEM;
- goto err_kzalloc;
- }
- device->pdev = pdev;
- pci_set_drvdata(pdev, device);
- device->iobase = iobase;
-
- pci_set_master(pdev);
-
- switch (readb(iobase + IOAT_VER_OFFSET)) {
- case IOAT_VER_1_2:
- device->dma = ioat_dma_probe(pdev, iobase);
- if (device->dma && ioat_dca_enabled)
- device->dca = ioat_dca_init(pdev, iobase);
- break;
- case IOAT_VER_2_0:
- device->dma = ioat_dma_probe(pdev, iobase);
- if (device->dma && ioat_dca_enabled)
- device->dca = ioat2_dca_init(pdev, iobase);
- break;
- case IOAT_VER_3_0:
- device->dma = ioat_dma_probe(pdev, iobase);
- if (device->dma && ioat_dca_enabled)
- device->dca = ioat3_dca_init(pdev, iobase);
- break;
- default:
- err = -ENODEV;
- break;
- }
- if (!device->dma)
- err = -ENODEV;
-
- if (err)
- goto err_version;
-
- return 0;
-
-err_version:
- kfree(device);
-err_kzalloc:
- iounmap(iobase);
-err_ioremap:
-err_set_dma_mask:
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-err_request_regions:
-err_enable_device:
- return err;
-}
-
-static void __devexit ioat_remove(struct pci_dev *pdev)
-{
- struct ioat_device *device = pci_get_drvdata(pdev);
-
- dev_err(&pdev->dev, "Removing dma and dca services\n");
- if (device->dca) {
- unregister_dca_provider(device->dca);
- free_dca_provider(device->dca);
- device->dca = NULL;
- }
-
- if (device->dma) {
- ioat_dma_remove(device->dma);
- device->dma = NULL;
- }
-
- kfree(device);
-}
-
-static int __init ioat_init_module(void)
-{
- return pci_register_driver(&ioat_pci_driver);
-}
-module_init(ioat_init_module);
-
-static void __exit ioat_exit_module(void)
-{
- pci_unregister_driver(&ioat_pci_driver);
-}
-module_exit(ioat_exit_module);
--- /dev/null
+obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
+ioatdma-objs := pci.o dma.o dma_v2.o dma_v3.o dca.o
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2007 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/dca.h>
+
+/* either a kernel change is needed, or we need something like this in kernel */
+#ifndef CONFIG_SMP
+#include <asm/smp.h>
+#undef cpu_physical_id
+#define cpu_physical_id(cpu) (cpuid_ebx(1) >> 24)
+#endif
+
+#include "dma.h"
+#include "registers.h"
+
+/*
+ * Bit 7 of a tag map entry is the "valid" bit, if it is set then bits 0:6
+ * contain the bit number of the APIC ID to map into the DCA tag. If the valid
+ * bit is not set, then the value must be 0 or 1 and defines the bit in the tag.
+ */
+#define DCA_TAG_MAP_VALID 0x80
+
+#define DCA3_TAG_MAP_BIT_TO_INV 0x80
+#define DCA3_TAG_MAP_BIT_TO_SEL 0x40
+#define DCA3_TAG_MAP_LITERAL_VAL 0x1
+
+#define DCA_TAG_MAP_MASK 0xDF
+
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+ return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+ (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+ (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+ (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+ (tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
+/*
+ * "Legacy" DCA systems do not implement the DCA register set in the
+ * I/OAT device. Software needs direct support for their tag mappings.
+ */
+
+#define APICID_BIT(x) (DCA_TAG_MAP_VALID | (x))
+#define IOAT_TAG_MAP_LEN 8
+
+static u8 ioat_tag_map_BNB[IOAT_TAG_MAP_LEN] = {
+ 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
+static u8 ioat_tag_map_SCNB[IOAT_TAG_MAP_LEN] = {
+ 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
+static u8 ioat_tag_map_CNB[IOAT_TAG_MAP_LEN] = {
+ 1, APICID_BIT(1), APICID_BIT(3), APICID_BIT(4), APICID_BIT(2), };
+static u8 ioat_tag_map_UNISYS[IOAT_TAG_MAP_LEN] = { 0 };
+
+/* pack PCI B/D/F into a u16 */
+static inline u16 dcaid_from_pcidev(struct pci_dev *pci)
+{
+ return (pci->bus->number << 8) | pci->devfn;
+}
+
+static int dca_enabled_in_bios(struct pci_dev *pdev)
+{
+ /* CPUID level 9 returns DCA configuration */
+ /* Bit 0 indicates DCA enabled by the BIOS */
+ unsigned long cpuid_level_9;
+ int res;
+
+ cpuid_level_9 = cpuid_eax(9);
+ res = test_bit(0, &cpuid_level_9);
+ if (!res)
+ dev_err(&pdev->dev, "DCA is disabled in BIOS\n");
+
+ return res;
+}
+
+static int system_has_dca_enabled(struct pci_dev *pdev)
+{
+ if (boot_cpu_has(X86_FEATURE_DCA))
+ return dca_enabled_in_bios(pdev);
+
+ dev_err(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n");
+ return 0;
+}
+
+struct ioat_dca_slot {
+ struct pci_dev *pdev; /* requester device */
+ u16 rid; /* requester id, as used by IOAT */
+};
+
+#define IOAT_DCA_MAX_REQ 6
+#define IOAT3_DCA_MAX_REQ 2
+
+struct ioat_dca_priv {
+ void __iomem *iobase;
+ void __iomem *dca_base;
+ int max_requesters;
+ int requester_count;
+ u8 tag_map[IOAT_TAG_MAP_LEN];
+ struct ioat_dca_slot req_slots[0];
+};
+
+/* 5000 series chipset DCA Port Requester ID Table Entry Format
+ * [15:8] PCI-Express Bus Number
+ * [7:3] PCI-Express Device Number
+ * [2:0] PCI-Express Function Number
+ *
+ * 5000 series chipset DCA control register format
+ * [7:1] Reserved (0)
+ * [0] Ignore Function Number
+ */
+
+static int ioat_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 id;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+ id = dcaid_from_pcidev(pdev);
+
+ if (ioatdca->requester_count == ioatdca->max_requesters)
+ return -ENODEV;
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == NULL) {
+ /* found an empty slot */
+ ioatdca->requester_count++;
+ ioatdca->req_slots[i].pdev = pdev;
+ ioatdca->req_slots[i].rid = id;
+ writew(id, ioatdca->dca_base + (i * 4));
+ /* make sure the ignore function bit is off */
+ writeb(0, ioatdca->dca_base + (i * 4) + 2);
+ return i;
+ }
+ }
+ /* Error, ioatdma->requester_count is out of whack */
+ return -EFAULT;
+}
+
+static int ioat_dca_remove_requester(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev) {
+ writew(0, ioatdca->dca_base + (i * 4));
+ ioatdca->req_slots[i].pdev = NULL;
+ ioatdca->req_slots[i].rid = 0;
+ ioatdca->requester_count--;
+ return i;
+ }
+ }
+ return -ENODEV;
+}
+
+static u8 ioat_dca_get_tag(struct dca_provider *dca,
+ struct device *dev,
+ int cpu)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ int i, apic_id, bit, value;
+ u8 entry, tag;
+
+ tag = 0;
+ apic_id = cpu_physical_id(cpu);
+
+ for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
+ entry = ioatdca->tag_map[i];
+ if (entry & DCA_TAG_MAP_VALID) {
+ bit = entry & ~DCA_TAG_MAP_VALID;
+ value = (apic_id & (1 << bit)) ? 1 : 0;
+ } else {
+ value = entry ? 1 : 0;
+ }
+ tag |= (value << i);
+ }
+ return tag;
+}
+
+static int ioat_dca_dev_managed(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+
+ pdev = to_pci_dev(dev);
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev)
+ return 1;
+ }
+ return 0;
+}
+
+static struct dca_ops ioat_dca_ops = {
+ .add_requester = ioat_dca_add_requester,
+ .remove_requester = ioat_dca_remove_requester,
+ .get_tag = ioat_dca_get_tag,
+ .dev_managed = ioat_dca_dev_managed,
+};
+
+
+struct dca_provider * __devinit
+ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct dca_provider *dca;
+ struct ioat_dca_priv *ioatdca;
+ u8 *tag_map = NULL;
+ int i;
+ int err;
+ u8 version;
+ u8 max_requesters;
+
+ if (!system_has_dca_enabled(pdev))
+ return NULL;
+
+ /* I/OAT v1 systems must have a known tag_map to support DCA */
+ switch (pdev->vendor) {
+ case PCI_VENDOR_ID_INTEL:
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_IOAT:
+ tag_map = ioat_tag_map_BNB;
+ break;
+ case PCI_DEVICE_ID_INTEL_IOAT_CNB:
+ tag_map = ioat_tag_map_CNB;
+ break;
+ case PCI_DEVICE_ID_INTEL_IOAT_SCNB:
+ tag_map = ioat_tag_map_SCNB;
+ break;
+ }
+ break;
+ case PCI_VENDOR_ID_UNISYS:
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR:
+ tag_map = ioat_tag_map_UNISYS;
+ break;
+ }
+ break;
+ }
+ if (tag_map == NULL)
+ return NULL;
+
+ version = readb(iobase + IOAT_VER_OFFSET);
+ if (version == IOAT_VER_3_0)
+ max_requesters = IOAT3_DCA_MAX_REQ;
+ else
+ max_requesters = IOAT_DCA_MAX_REQ;
+
+ dca = alloc_dca_provider(&ioat_dca_ops,
+ sizeof(*ioatdca) +
+ (sizeof(struct ioat_dca_slot) * max_requesters));
+ if (!dca)
+ return NULL;
+
+ ioatdca = dca_priv(dca);
+ ioatdca->max_requesters = max_requesters;
+ ioatdca->dca_base = iobase + 0x54;
+
+ /* copy over the APIC ID to DCA tag mapping */
+ for (i = 0; i < IOAT_TAG_MAP_LEN; i++)
+ ioatdca->tag_map[i] = tag_map[i];
+
+ err = register_dca_provider(dca, &pdev->dev);
+ if (err) {
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ return dca;
+}
+
+
+static int ioat2_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 id;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+ id = dcaid_from_pcidev(pdev);
+
+ if (ioatdca->requester_count == ioatdca->max_requesters)
+ return -ENODEV;
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == NULL) {
+ /* found an empty slot */
+ ioatdca->requester_count++;
+ ioatdca->req_slots[i].pdev = pdev;
+ ioatdca->req_slots[i].rid = id;
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
+ writel(id | IOAT_DCA_GREQID_VALID,
+ ioatdca->iobase + global_req_table + (i * 4));
+ return i;
+ }
+ }
+ /* Error, ioatdma->requester_count is out of whack */
+ return -EFAULT;
+}
+
+static int ioat2_dca_remove_requester(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev) {
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
+ writel(0, ioatdca->iobase + global_req_table + (i * 4));
+ ioatdca->req_slots[i].pdev = NULL;
+ ioatdca->req_slots[i].rid = 0;
+ ioatdca->requester_count--;
+ return i;
+ }
+ }
+ return -ENODEV;
+}
+
+static u8 ioat2_dca_get_tag(struct dca_provider *dca,
+ struct device *dev,
+ int cpu)
+{
+ u8 tag;
+
+ tag = ioat_dca_get_tag(dca, dev, cpu);
+ tag = (~tag) & 0x1F;
+ return tag;
+}
+
+static struct dca_ops ioat2_dca_ops = {
+ .add_requester = ioat2_dca_add_requester,
+ .remove_requester = ioat2_dca_remove_requester,
+ .get_tag = ioat2_dca_get_tag,
+ .dev_managed = ioat_dca_dev_managed,
+};
+
+static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
+{
+ int slots = 0;
+ u32 req;
+ u16 global_req_table;
+
+ global_req_table = readw(iobase + dca_offset + IOAT_DCA_GREQID_OFFSET);
+ if (global_req_table == 0)
+ return 0;
+ do {
+ req = readl(iobase + global_req_table + (slots * sizeof(u32)));
+ slots++;
+ } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
+
+ return slots;
+}
+
+struct dca_provider * __devinit
+ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct dca_provider *dca;
+ struct ioat_dca_priv *ioatdca;
+ int slots;
+ int i;
+ int err;
+ u32 tag_map;
+ u16 dca_offset;
+ u16 csi_fsb_control;
+ u16 pcie_control;
+ u8 bit;
+
+ if (!system_has_dca_enabled(pdev))
+ return NULL;
+
+ dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
+ if (dca_offset == 0)
+ return NULL;
+
+ slots = ioat2_dca_count_dca_slots(iobase, dca_offset);
+ if (slots == 0)
+ return NULL;
+
+ dca = alloc_dca_provider(&ioat2_dca_ops,
+ sizeof(*ioatdca)
+ + (sizeof(struct ioat_dca_slot) * slots));
+ if (!dca)
+ return NULL;
+
+ ioatdca = dca_priv(dca);
+ ioatdca->iobase = iobase;
+ ioatdca->dca_base = iobase + dca_offset;
+ ioatdca->max_requesters = slots;
+
+ /* some bios might not know to turn these on */
+ csi_fsb_control = readw(ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
+ if ((csi_fsb_control & IOAT_FSB_CAP_ENABLE_PREFETCH) == 0) {
+ csi_fsb_control |= IOAT_FSB_CAP_ENABLE_PREFETCH;
+ writew(csi_fsb_control,
+ ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
+ }
+ pcie_control = readw(ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
+ if ((pcie_control & IOAT_PCI_CAP_ENABLE_MEMWR) == 0) {
+ pcie_control |= IOAT_PCI_CAP_ENABLE_MEMWR;
+ writew(pcie_control,
+ ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
+ }
+
+
+ /* TODO version, compatibility and configuration checks */
+
+ /* copy out the APIC to DCA tag map */
+ tag_map = readl(ioatdca->dca_base + IOAT_APICID_TAG_MAP_OFFSET);
+ for (i = 0; i < 5; i++) {
+ bit = (tag_map >> (4 * i)) & 0x0f;
+ if (bit < 8)
+ ioatdca->tag_map[i] = bit | DCA_TAG_MAP_VALID;
+ else
+ ioatdca->tag_map[i] = 0;
+ }
+
+ if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+ dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+ "disabling DCA\n");
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ err = register_dca_provider(dca, &pdev->dev);
+ if (err) {
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ return dca;
+}
+
+static int ioat3_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 id;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+ id = dcaid_from_pcidev(pdev);
+
+ if (ioatdca->requester_count == ioatdca->max_requesters)
+ return -ENODEV;
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == NULL) {
+ /* found an empty slot */
+ ioatdca->requester_count++;
+ ioatdca->req_slots[i].pdev = pdev;
+ ioatdca->req_slots[i].rid = id;
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
+ writel(id | IOAT_DCA_GREQID_VALID,
+ ioatdca->iobase + global_req_table + (i * 4));
+ return i;
+ }
+ }
+ /* Error, ioatdma->requester_count is out of whack */
+ return -EFAULT;
+}
+
+static int ioat3_dca_remove_requester(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev) {
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
+ writel(0, ioatdca->iobase + global_req_table + (i * 4));
+ ioatdca->req_slots[i].pdev = NULL;
+ ioatdca->req_slots[i].rid = 0;
+ ioatdca->requester_count--;
+ return i;
+ }
+ }
+ return -ENODEV;
+}
+
+static u8 ioat3_dca_get_tag(struct dca_provider *dca,
+ struct device *dev,
+ int cpu)
+{
+ u8 tag;
+
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ int i, apic_id, bit, value;
+ u8 entry;
+
+ tag = 0;
+ apic_id = cpu_physical_id(cpu);
+
+ for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
+ entry = ioatdca->tag_map[i];
+ if (entry & DCA3_TAG_MAP_BIT_TO_SEL) {
+ bit = entry &
+ ~(DCA3_TAG_MAP_BIT_TO_SEL | DCA3_TAG_MAP_BIT_TO_INV);
+ value = (apic_id & (1 << bit)) ? 1 : 0;
+ } else if (entry & DCA3_TAG_MAP_BIT_TO_INV) {
+ bit = entry & ~DCA3_TAG_MAP_BIT_TO_INV;
+ value = (apic_id & (1 << bit)) ? 0 : 1;
+ } else {
+ value = (entry & DCA3_TAG_MAP_LITERAL_VAL) ? 1 : 0;
+ }
+ tag |= (value << i);
+ }
+
+ return tag;
+}
+
+static struct dca_ops ioat3_dca_ops = {
+ .add_requester = ioat3_dca_add_requester,
+ .remove_requester = ioat3_dca_remove_requester,
+ .get_tag = ioat3_dca_get_tag,
+ .dev_managed = ioat_dca_dev_managed,
+};
+
+static int ioat3_dca_count_dca_slots(void *iobase, u16 dca_offset)
+{
+ int slots = 0;
+ u32 req;
+ u16 global_req_table;
+
+ global_req_table = readw(iobase + dca_offset + IOAT3_DCA_GREQID_OFFSET);
+ if (global_req_table == 0)
+ return 0;
+
+ do {
+ req = readl(iobase + global_req_table + (slots * sizeof(u32)));
+ slots++;
+ } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
+
+ return slots;
+}
+
+struct dca_provider * __devinit
+ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct dca_provider *dca;
+ struct ioat_dca_priv *ioatdca;
+ int slots;
+ int i;
+ int err;
+ u16 dca_offset;
+ u16 csi_fsb_control;
+ u16 pcie_control;
+ u8 bit;
+
+ union {
+ u64 full;
+ struct {
+ u32 low;
+ u32 high;
+ };
+ } tag_map;
+
+ if (!system_has_dca_enabled(pdev))
+ return NULL;
+
+ dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
+ if (dca_offset == 0)
+ return NULL;
+
+ slots = ioat3_dca_count_dca_slots(iobase, dca_offset);
+ if (slots == 0)
+ return NULL;
+
+ dca = alloc_dca_provider(&ioat3_dca_ops,
+ sizeof(*ioatdca)
+ + (sizeof(struct ioat_dca_slot) * slots));
+ if (!dca)
+ return NULL;
+
+ ioatdca = dca_priv(dca);
+ ioatdca->iobase = iobase;
+ ioatdca->dca_base = iobase + dca_offset;
+ ioatdca->max_requesters = slots;
+
+ /* some bios might not know to turn these on */
+ csi_fsb_control = readw(ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
+ if ((csi_fsb_control & IOAT3_CSI_CONTROL_PREFETCH) == 0) {
+ csi_fsb_control |= IOAT3_CSI_CONTROL_PREFETCH;
+ writew(csi_fsb_control,
+ ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
+ }
+ pcie_control = readw(ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
+ if ((pcie_control & IOAT3_PCI_CONTROL_MEMWR) == 0) {
+ pcie_control |= IOAT3_PCI_CONTROL_MEMWR;
+ writew(pcie_control,
+ ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
+ }
+
+
+ /* TODO version, compatibility and configuration checks */
+
+ /* copy out the APIC to DCA tag map */
+ tag_map.low =
+ readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_LOW);
+ tag_map.high =
+ readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_HIGH);
+ for (i = 0; i < 8; i++) {
+ bit = tag_map.full >> (8 * i);
+ ioatdca->tag_map[i] = bit & DCA_TAG_MAP_MASK;
+ }
+
+ err = register_dca_provider(dca, &pdev->dev);
+ if (err) {
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ return dca;
+}
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2004 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+/*
+ * This driver supports an Intel I/OAT DMA engine, which does asynchronous
+ * copy operations.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+#include <linux/i7300_idle.h>
+#include "dma.h"
+#include "registers.h"
+#include "hw.h"
+
+int ioat_pending_level = 4;
+module_param(ioat_pending_level, int, 0644);
+MODULE_PARM_DESC(ioat_pending_level,
+ "high-water mark for pushing ioat descriptors (default: 4)");
+
+/* internal functions */
+static void ioat1_cleanup(struct ioat_dma_chan *ioat);
+static void ioat1_dma_start_null_desc(struct ioat_dma_chan *ioat);
+
+/**
+ * ioat_dma_do_interrupt - handler used for single vector interrupt mode
+ * @irq: interrupt id
+ * @data: interrupt data
+ */
+static irqreturn_t ioat_dma_do_interrupt(int irq, void *data)
+{
+ struct ioatdma_device *instance = data;
+ struct ioat_chan_common *chan;
+ unsigned long attnstatus;
+ int bit;
+ u8 intrctrl;
+
+ intrctrl = readb(instance->reg_base + IOAT_INTRCTRL_OFFSET);
+
+ if (!(intrctrl & IOAT_INTRCTRL_MASTER_INT_EN))
+ return IRQ_NONE;
+
+ if (!(intrctrl & IOAT_INTRCTRL_INT_STATUS)) {
+ writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
+ return IRQ_NONE;
+ }
+
+ attnstatus = readl(instance->reg_base + IOAT_ATTNSTATUS_OFFSET);
+ for_each_bit(bit, &attnstatus, BITS_PER_LONG) {
+ chan = ioat_chan_by_index(instance, bit);
+ tasklet_schedule(&chan->cleanup_task);
+ }
+
+ writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
+ return IRQ_HANDLED;
+}
+
+/**
+ * ioat_dma_do_interrupt_msix - handler used for vector-per-channel interrupt mode
+ * @irq: interrupt id
+ * @data: interrupt data
+ */
+static irqreturn_t ioat_dma_do_interrupt_msix(int irq, void *data)
+{
+ struct ioat_chan_common *chan = data;
+
+ tasklet_schedule(&chan->cleanup_task);
+
+ return IRQ_HANDLED;
+}
+
+static void ioat1_cleanup_tasklet(unsigned long data);
+
+/* common channel initialization */
+void ioat_init_channel(struct ioatdma_device *device,
+ struct ioat_chan_common *chan, int idx,
+ void (*timer_fn)(unsigned long),
+ void (*tasklet)(unsigned long),
+ unsigned long ioat)
+{
+ struct dma_device *dma = &device->common;
+
+ chan->device = device;
+ chan->reg_base = device->reg_base + (0x80 * (idx + 1));
+ spin_lock_init(&chan->cleanup_lock);
+ chan->common.device = dma;
+ list_add_tail(&chan->common.device_node, &dma->channels);
+ device->idx[idx] = chan;
+ init_timer(&chan->timer);
+ chan->timer.function = timer_fn;
+ chan->timer.data = ioat;
+ tasklet_init(&chan->cleanup_task, tasklet, ioat);
+ tasklet_disable(&chan->cleanup_task);
+}
+
+static void ioat1_timer_event(unsigned long data);
+
+/**
+ * ioat1_dma_enumerate_channels - find and initialize the device's channels
+ * @device: the device to be enumerated
+ */
+static int ioat1_enumerate_channels(struct ioatdma_device *device)
+{
+ u8 xfercap_scale;
+ u32 xfercap;
+ int i;
+ struct ioat_dma_chan *ioat;
+ struct device *dev = &device->pdev->dev;
+ struct dma_device *dma = &device->common;
+
+ INIT_LIST_HEAD(&dma->channels);
+ dma->chancnt = readb(device->reg_base + IOAT_CHANCNT_OFFSET);
+ dma->chancnt &= 0x1f; /* bits [4:0] valid */
+ if (dma->chancnt > ARRAY_SIZE(device->idx)) {
+ dev_warn(dev, "(%d) exceeds max supported channels (%zu)\n",
+ dma->chancnt, ARRAY_SIZE(device->idx));
+ dma->chancnt = ARRAY_SIZE(device->idx);
+ }
+ xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
+ xfercap_scale &= 0x1f; /* bits [4:0] valid */
+ xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
+ dev_dbg(dev, "%s: xfercap = %d\n", __func__, xfercap);
+
+#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0)
+ dma->chancnt--;
+#endif
+ for (i = 0; i < dma->chancnt; i++) {
+ ioat = devm_kzalloc(dev, sizeof(*ioat), GFP_KERNEL);
+ if (!ioat)
+ break;
+
+ ioat_init_channel(device, &ioat->base, i,
+ ioat1_timer_event,
+ ioat1_cleanup_tasklet,
+ (unsigned long) ioat);
+ ioat->xfercap = xfercap;
+ spin_lock_init(&ioat->desc_lock);
+ INIT_LIST_HEAD(&ioat->free_desc);
+ INIT_LIST_HEAD(&ioat->used_desc);
+ }
+ dma->chancnt = i;
+ return i;
+}
+
+/**
+ * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended
+ * descriptors to hw
+ * @chan: DMA channel handle
+ */
+static inline void
+__ioat1_dma_memcpy_issue_pending(struct ioat_dma_chan *ioat)
+{
+ void __iomem *reg_base = ioat->base.reg_base;
+
+ dev_dbg(to_dev(&ioat->base), "%s: pending: %d\n",
+ __func__, ioat->pending);
+ ioat->pending = 0;
+ writeb(IOAT_CHANCMD_APPEND, reg_base + IOAT1_CHANCMD_OFFSET);
+}
+
+static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(chan);
+
+ if (ioat->pending > 0) {
+ spin_lock_bh(&ioat->desc_lock);
+ __ioat1_dma_memcpy_issue_pending(ioat);
+ spin_unlock_bh(&ioat->desc_lock);
+ }
+}
+
+/**
+ * ioat1_reset_channel - restart a channel
+ * @ioat: IOAT DMA channel handle
+ */
+static void ioat1_reset_channel(struct ioat_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ void __iomem *reg_base = chan->reg_base;
+ u32 chansts, chanerr;
+
+ dev_warn(to_dev(chan), "reset\n");
+ chanerr = readl(reg_base + IOAT_CHANERR_OFFSET);
+ chansts = *chan->completion & IOAT_CHANSTS_STATUS;
+ if (chanerr) {
+ dev_err(to_dev(chan),
+ "chan%d, CHANSTS = 0x%08x CHANERR = 0x%04x, clearing\n",
+ chan_num(chan), chansts, chanerr);
+ writel(chanerr, reg_base + IOAT_CHANERR_OFFSET);
+ }
+
+ /*
+ * whack it upside the head with a reset
+ * and wait for things to settle out.
+ * force the pending count to a really big negative
+ * to make sure no one forces an issue_pending
+ * while we're waiting.
+ */
+
+ ioat->pending = INT_MIN;
+ writeb(IOAT_CHANCMD_RESET,
+ reg_base + IOAT_CHANCMD_OFFSET(chan->device->version));
+ set_bit(IOAT_RESET_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + RESET_DELAY);
+}
+
+static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct dma_chan *c = tx->chan;
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_desc_sw *desc = tx_to_ioat_desc(tx);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_desc_sw *first;
+ struct ioat_desc_sw *chain_tail;
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&ioat->desc_lock);
+ /* cookie incr and addition to used_list must be atomic */
+ cookie = c->cookie;
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+ c->cookie = cookie;
+ tx->cookie = cookie;
+ dev_dbg(to_dev(&ioat->base), "%s: cookie: %d\n", __func__, cookie);
+
+ /* write address into NextDescriptor field of last desc in chain */
+ first = to_ioat_desc(desc->tx_list.next);
+ chain_tail = to_ioat_desc(ioat->used_desc.prev);
+ /* make descriptor updates globally visible before chaining */
+ wmb();
+ chain_tail->hw->next = first->txd.phys;
+ list_splice_tail_init(&desc->tx_list, &ioat->used_desc);
+ dump_desc_dbg(ioat, chain_tail);
+ dump_desc_dbg(ioat, first);
+
+ if (!test_and_set_bit(IOAT_COMPLETION_PENDING, &chan->state))
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+
+ ioat->active += desc->hw->tx_cnt;
+ ioat->pending += desc->hw->tx_cnt;
+ if (ioat->pending >= ioat_pending_level)
+ __ioat1_dma_memcpy_issue_pending(ioat);
+ spin_unlock_bh(&ioat->desc_lock);
+
+ return cookie;
+}
+
+/**
+ * ioat_dma_alloc_descriptor - allocate and return a sw and hw descriptor pair
+ * @ioat: the channel supplying the memory pool for the descriptors
+ * @flags: allocation flags
+ */
+static struct ioat_desc_sw *
+ioat_dma_alloc_descriptor(struct ioat_dma_chan *ioat, gfp_t flags)
+{
+ struct ioat_dma_descriptor *desc;
+ struct ioat_desc_sw *desc_sw;
+ struct ioatdma_device *ioatdma_device;
+ dma_addr_t phys;
+
+ ioatdma_device = ioat->base.device;
+ desc = pci_pool_alloc(ioatdma_device->dma_pool, flags, &phys);
+ if (unlikely(!desc))
+ return NULL;
+
+ desc_sw = kzalloc(sizeof(*desc_sw), flags);
+ if (unlikely(!desc_sw)) {
+ pci_pool_free(ioatdma_device->dma_pool, desc, phys);
+ return NULL;
+ }
+
+ memset(desc, 0, sizeof(*desc));
+
+ INIT_LIST_HEAD(&desc_sw->tx_list);
+ dma_async_tx_descriptor_init(&desc_sw->txd, &ioat->base.common);
+ desc_sw->txd.tx_submit = ioat1_tx_submit;
+ desc_sw->hw = desc;
+ desc_sw->txd.phys = phys;
+ set_desc_id(desc_sw, -1);
+
+ return desc_sw;
+}
+
+static int ioat_initial_desc_count = 256;
+module_param(ioat_initial_desc_count, int, 0644);
+MODULE_PARM_DESC(ioat_initial_desc_count,
+ "ioat1: initial descriptors per channel (default: 256)");
+/**
+ * ioat1_dma_alloc_chan_resources - returns the number of allocated descriptors
+ * @chan: the channel to be filled out
+ */
+static int ioat1_dma_alloc_chan_resources(struct dma_chan *c)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_desc_sw *desc;
+ u32 chanerr;
+ int i;
+ LIST_HEAD(tmp_list);
+
+ /* have we already been set up? */
+ if (!list_empty(&ioat->free_desc))
+ return ioat->desccount;
+
+ /* Setup register to interrupt and write completion status on error */
+ writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET);
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ if (chanerr) {
+ dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr);
+ writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
+ }
+
+ /* Allocate descriptors */
+ for (i = 0; i < ioat_initial_desc_count; i++) {
+ desc = ioat_dma_alloc_descriptor(ioat, GFP_KERNEL);
+ if (!desc) {
+ dev_err(to_dev(chan), "Only %d initial descriptors\n", i);
+ break;
+ }
+ set_desc_id(desc, i);
+ list_add_tail(&desc->node, &tmp_list);
+ }
+ spin_lock_bh(&ioat->desc_lock);
+ ioat->desccount = i;
+ list_splice(&tmp_list, &ioat->free_desc);
+ spin_unlock_bh(&ioat->desc_lock);
+
+ /* allocate a completion writeback area */
+ /* doing 2 32bit writes to mmio since 1 64b write doesn't work */
+ chan->completion = pci_pool_alloc(chan->device->completion_pool,
+ GFP_KERNEL, &chan->completion_dma);
+ memset(chan->completion, 0, sizeof(*chan->completion));
+ writel(((u64) chan->completion_dma) & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_LOW);
+ writel(((u64) chan->completion_dma) >> 32,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
+
+ tasklet_enable(&chan->cleanup_task);
+ ioat1_dma_start_null_desc(ioat); /* give chain to dma device */
+ dev_dbg(to_dev(chan), "%s: allocated %d descriptors\n",
+ __func__, ioat->desccount);
+ return ioat->desccount;
+}
+
+/**
+ * ioat1_dma_free_chan_resources - release all the descriptors
+ * @chan: the channel to be cleaned
+ */
+static void ioat1_dma_free_chan_resources(struct dma_chan *c)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioatdma_device *ioatdma_device = chan->device;
+ struct ioat_desc_sw *desc, *_desc;
+ int in_use_descs = 0;
+
+ /* Before freeing channel resources first check
+ * if they have been previously allocated for this channel.
+ */
+ if (ioat->desccount == 0)
+ return;
+
+ tasklet_disable(&chan->cleanup_task);
+ del_timer_sync(&chan->timer);
+ ioat1_cleanup(ioat);
+
+ /* Delay 100ms after reset to allow internal DMA logic to quiesce
+ * before removing DMA descriptor resources.
+ */
+ writeb(IOAT_CHANCMD_RESET,
+ chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version));
+ mdelay(100);
+
+ spin_lock_bh(&ioat->desc_lock);
+ list_for_each_entry_safe(desc, _desc, &ioat->used_desc, node) {
+ dev_dbg(to_dev(chan), "%s: freeing %d from used list\n",
+ __func__, desc_id(desc));
+ dump_desc_dbg(ioat, desc);
+ in_use_descs++;
+ list_del(&desc->node);
+ pci_pool_free(ioatdma_device->dma_pool, desc->hw,
+ desc->txd.phys);
+ kfree(desc);
+ }
+ list_for_each_entry_safe(desc, _desc,
+ &ioat->free_desc, node) {
+ list_del(&desc->node);
+ pci_pool_free(ioatdma_device->dma_pool, desc->hw,
+ desc->txd.phys);
+ kfree(desc);
+ }
+ spin_unlock_bh(&ioat->desc_lock);
+
+ pci_pool_free(ioatdma_device->completion_pool,
+ chan->completion,
+ chan->completion_dma);
+
+ /* one is ok since we left it on there on purpose */
+ if (in_use_descs > 1)
+ dev_err(to_dev(chan), "Freeing %d in use descriptors!\n",
+ in_use_descs - 1);
+
+ chan->last_completion = 0;
+ chan->completion_dma = 0;
+ ioat->pending = 0;
+ ioat->desccount = 0;
+}
+
+/**
+ * ioat1_dma_get_next_descriptor - return the next available descriptor
+ * @ioat: IOAT DMA channel handle
+ *
+ * Gets the next descriptor from the chain, and must be called with the
+ * channel's desc_lock held. Allocates more descriptors if the channel
+ * has run out.
+ */
+static struct ioat_desc_sw *
+ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat)
+{
+ struct ioat_desc_sw *new;
+
+ if (!list_empty(&ioat->free_desc)) {
+ new = to_ioat_desc(ioat->free_desc.next);
+ list_del(&new->node);
+ } else {
+ /* try to get another desc */
+ new = ioat_dma_alloc_descriptor(ioat, GFP_ATOMIC);
+ if (!new) {
+ dev_err(to_dev(&ioat->base), "alloc failed\n");
+ return NULL;
+ }
+ }
+ dev_dbg(to_dev(&ioat->base), "%s: allocated: %d\n",
+ __func__, desc_id(new));
+ prefetch(new->hw);
+ return new;
+}
+
+static struct dma_async_tx_descriptor *
+ioat1_dma_prep_memcpy(struct dma_chan *c, dma_addr_t dma_dest,
+ dma_addr_t dma_src, size_t len, unsigned long flags)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_desc_sw *desc;
+ size_t copy;
+ LIST_HEAD(chain);
+ dma_addr_t src = dma_src;
+ dma_addr_t dest = dma_dest;
+ size_t total_len = len;
+ struct ioat_dma_descriptor *hw = NULL;
+ int tx_cnt = 0;
+
+ spin_lock_bh(&ioat->desc_lock);
+ desc = ioat1_dma_get_next_descriptor(ioat);
+ do {
+ if (!desc)
+ break;
+
+ tx_cnt++;
+ copy = min_t(size_t, len, ioat->xfercap);
+
+ hw = desc->hw;
+ hw->size = copy;
+ hw->ctl = 0;
+ hw->src_addr = src;
+ hw->dst_addr = dest;
+
+ list_add_tail(&desc->node, &chain);
+
+ len -= copy;
+ dest += copy;
+ src += copy;
+ if (len) {
+ struct ioat_desc_sw *next;
+
+ async_tx_ack(&desc->txd);
+ next = ioat1_dma_get_next_descriptor(ioat);
+ hw->next = next ? next->txd.phys : 0;
+ dump_desc_dbg(ioat, desc);
+ desc = next;
+ } else
+ hw->next = 0;
+ } while (len);
+
+ if (!desc) {
+ struct ioat_chan_common *chan = &ioat->base;
+
+ dev_err(to_dev(chan),
+ "chan%d - get_next_desc failed\n", chan_num(chan));
+ list_splice(&chain, &ioat->free_desc);
+ spin_unlock_bh(&ioat->desc_lock);
+ return NULL;
+ }
+ spin_unlock_bh(&ioat->desc_lock);
+
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ list_splice(&chain, &desc->tx_list);
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.compl_write = 1;
+ hw->tx_cnt = tx_cnt;
+ dump_desc_dbg(ioat, desc);
+
+ return &desc->txd;
+}
+
+static void ioat1_cleanup_tasklet(unsigned long data)
+{
+ struct ioat_dma_chan *chan = (void *)data;
+
+ ioat1_cleanup(chan);
+ writew(IOAT_CHANCTRL_RUN, chan->base.reg_base + IOAT_CHANCTRL_OFFSET);
+}
+
+void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags,
+ size_t len, struct ioat_dma_descriptor *hw)
+{
+ struct pci_dev *pdev = chan->device->pdev;
+ size_t offset = len - hw->size;
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP))
+ ioat_unmap(pdev, hw->dst_addr - offset, len,
+ PCI_DMA_FROMDEVICE, flags, 1);
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP))
+ ioat_unmap(pdev, hw->src_addr - offset, len,
+ PCI_DMA_TODEVICE, flags, 0);
+}
+
+unsigned long ioat_get_current_completion(struct ioat_chan_common *chan)
+{
+ unsigned long phys_complete;
+ u64 completion;
+
+ completion = *chan->completion;
+ phys_complete = ioat_chansts_to_addr(completion);
+
+ dev_dbg(to_dev(chan), "%s: phys_complete: %#llx\n", __func__,
+ (unsigned long long) phys_complete);
+
+ if (is_ioat_halted(completion)) {
+ u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ dev_err(to_dev(chan), "Channel halted, chanerr = %x\n",
+ chanerr);
+
+ /* TODO do something to salvage the situation */
+ }
+
+ return phys_complete;
+}
+
+bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
+ unsigned long *phys_complete)
+{
+ *phys_complete = ioat_get_current_completion(chan);
+ if (*phys_complete == chan->last_completion)
+ return false;
+ clear_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+
+ return true;
+}
+
+static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct list_head *_desc, *n;
+ struct dma_async_tx_descriptor *tx;
+
+ dev_dbg(to_dev(chan), "%s: phys_complete: %lx\n",
+ __func__, phys_complete);
+ list_for_each_safe(_desc, n, &ioat->used_desc) {
+ struct ioat_desc_sw *desc;
+
+ prefetch(n);
+ desc = list_entry(_desc, typeof(*desc), node);
+ tx = &desc->txd;
+ /*
+ * Incoming DMA requests may use multiple descriptors,
+ * due to exceeding xfercap, perhaps. If so, only the
+ * last one will have a cookie, and require unmapping.
+ */
+ dump_desc_dbg(ioat, desc);
+ if (tx->cookie) {
+ chan->completed_cookie = tx->cookie;
+ tx->cookie = 0;
+ ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw);
+ ioat->active -= desc->hw->tx_cnt;
+ if (tx->callback) {
+ tx->callback(tx->callback_param);
+ tx->callback = NULL;
+ }
+ }
+
+ if (tx->phys != phys_complete) {
+ /*
+ * a completed entry, but not the last, so clean
+ * up if the client is done with the descriptor
+ */
+ if (async_tx_test_ack(tx))
+ list_move_tail(&desc->node, &ioat->free_desc);
+ } else {
+ /*
+ * last used desc. Do not remove, so we can
+ * append from it.
+ */
+
+ /* if nothing else is pending, cancel the
+ * completion timeout
+ */
+ if (n == &ioat->used_desc) {
+ dev_dbg(to_dev(chan),
+ "%s cancel completion timeout\n",
+ __func__);
+ clear_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ }
+
+ /* TODO check status bits? */
+ break;
+ }
+ }
+
+ chan->last_completion = phys_complete;
+}
+
+/**
+ * ioat1_cleanup - cleanup up finished descriptors
+ * @chan: ioat channel to be cleaned up
+ *
+ * To prevent lock contention we defer cleanup when the locks are
+ * contended with a terminal timeout that forces cleanup and catches
+ * completion notification errors.
+ */
+static void ioat1_cleanup(struct ioat_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+
+ prefetch(chan->completion);
+
+ if (!spin_trylock_bh(&chan->cleanup_lock))
+ return;
+
+ if (!ioat_cleanup_preamble(chan, &phys_complete)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ if (!spin_trylock_bh(&ioat->desc_lock)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ __cleanup(ioat, phys_complete);
+
+ spin_unlock_bh(&ioat->desc_lock);
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static void ioat1_timer_event(unsigned long data)
+{
+ struct ioat_dma_chan *ioat = (void *) data;
+ struct ioat_chan_common *chan = &ioat->base;
+
+ dev_dbg(to_dev(chan), "%s: state: %lx\n", __func__, chan->state);
+
+ spin_lock_bh(&chan->cleanup_lock);
+ if (test_and_clear_bit(IOAT_RESET_PENDING, &chan->state)) {
+ struct ioat_desc_sw *desc;
+
+ spin_lock_bh(&ioat->desc_lock);
+
+ /* restart active descriptors */
+ desc = to_ioat_desc(ioat->used_desc.prev);
+ ioat_set_chainaddr(ioat, desc->txd.phys);
+ ioat_start(chan);
+
+ ioat->pending = 0;
+ set_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ spin_unlock_bh(&ioat->desc_lock);
+ } else if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
+ unsigned long phys_complete;
+
+ spin_lock_bh(&ioat->desc_lock);
+ /* if we haven't made progress and we have already
+ * acknowledged a pending completion once, then be more
+ * forceful with a restart
+ */
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+ else if (test_bit(IOAT_COMPLETION_ACK, &chan->state))
+ ioat1_reset_channel(ioat);
+ else {
+ u64 status = ioat_chansts(chan);
+
+ /* manually update the last completion address */
+ if (ioat_chansts_to_addr(status) != 0)
+ *chan->completion = status;
+
+ set_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ }
+ spin_unlock_bh(&ioat->desc_lock);
+ }
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static enum dma_status
+ioat1_dma_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+
+ if (ioat_is_complete(c, cookie, done, used) == DMA_SUCCESS)
+ return DMA_SUCCESS;
+
+ ioat1_cleanup(ioat);
+
+ return ioat_is_complete(c, cookie, done, used);
+}
+
+static void ioat1_dma_start_null_desc(struct ioat_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_desc_sw *desc;
+ struct ioat_dma_descriptor *hw;
+
+ spin_lock_bh(&ioat->desc_lock);
+
+ desc = ioat1_dma_get_next_descriptor(ioat);
+
+ if (!desc) {
+ dev_err(to_dev(chan),
+ "Unable to start null desc - get next desc failed\n");
+ spin_unlock_bh(&ioat->desc_lock);
+ return;
+ }
+
+ hw = desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = 1;
+ hw->ctl_f.compl_write = 1;
+ /* set size to non-zero value (channel returns error when size is 0) */
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ hw->src_addr = 0;
+ hw->dst_addr = 0;
+ async_tx_ack(&desc->txd);
+ hw->next = 0;
+ list_add_tail(&desc->node, &ioat->used_desc);
+ dump_desc_dbg(ioat, desc);
+
+ ioat_set_chainaddr(ioat, desc->txd.phys);
+ ioat_start(chan);
+ spin_unlock_bh(&ioat->desc_lock);
+}
+
+/*
+ * Perform a IOAT transaction to verify the HW works.
+ */
+#define IOAT_TEST_SIZE 2000
+
+static void __devinit ioat_dma_test_callback(void *dma_async_param)
+{
+ struct completion *cmp = dma_async_param;
+
+ complete(cmp);
+}
+
+/**
+ * ioat_dma_self_test - Perform a IOAT transaction to verify the HW works.
+ * @device: device to be tested
+ */
+int __devinit ioat_dma_self_test(struct ioatdma_device *device)
+{
+ int i;
+ u8 *src;
+ u8 *dest;
+ struct dma_device *dma = &device->common;
+ struct device *dev = &device->pdev->dev;
+ struct dma_chan *dma_chan;
+ struct dma_async_tx_descriptor *tx;
+ dma_addr_t dma_dest, dma_src;
+ dma_cookie_t cookie;
+ int err = 0;
+ struct completion cmp;
+ unsigned long tmo;
+ unsigned long flags;
+
+ src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
+ if (!src)
+ return -ENOMEM;
+ dest = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
+ if (!dest) {
+ kfree(src);
+ return -ENOMEM;
+ }
+
+ /* Fill in src buffer */
+ for (i = 0; i < IOAT_TEST_SIZE; i++)
+ src[i] = (u8)i;
+
+ /* Start copy, using first DMA channel */
+ dma_chan = container_of(dma->channels.next, struct dma_chan,
+ device_node);
+ if (dma->device_alloc_chan_resources(dma_chan) < 1) {
+ dev_err(dev, "selftest cannot allocate chan resource\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ dma_src = dma_map_single(dev, src, IOAT_TEST_SIZE, DMA_TO_DEVICE);
+ dma_dest = dma_map_single(dev, dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE);
+ flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE |
+ DMA_PREP_INTERRUPT;
+ tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
+ IOAT_TEST_SIZE, flags);
+ if (!tx) {
+ dev_err(dev, "Self-test prep failed, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test setup failed, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (tmo == 0 ||
+ dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+ != DMA_SUCCESS) {
+ dev_err(dev, "Self-test copy timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ if (memcmp(src, dest, IOAT_TEST_SIZE)) {
+ dev_err(dev, "Self-test copy failed compare, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+free_resources:
+ dma->device_free_chan_resources(dma_chan);
+out:
+ kfree(src);
+ kfree(dest);
+ return err;
+}
+
+static char ioat_interrupt_style[32] = "msix";
+module_param_string(ioat_interrupt_style, ioat_interrupt_style,
+ sizeof(ioat_interrupt_style), 0644);
+MODULE_PARM_DESC(ioat_interrupt_style,
+ "set ioat interrupt style: msix (default), "
+ "msix-single-vector, msi, intx)");
+
+/**
+ * ioat_dma_setup_interrupts - setup interrupt handler
+ * @device: ioat device
+ */
+static int ioat_dma_setup_interrupts(struct ioatdma_device *device)
+{
+ struct ioat_chan_common *chan;
+ struct pci_dev *pdev = device->pdev;
+ struct device *dev = &pdev->dev;
+ struct msix_entry *msix;
+ int i, j, msixcnt;
+ int err = -EINVAL;
+ u8 intrctrl = 0;
+
+ if (!strcmp(ioat_interrupt_style, "msix"))
+ goto msix;
+ if (!strcmp(ioat_interrupt_style, "msix-single-vector"))
+ goto msix_single_vector;
+ if (!strcmp(ioat_interrupt_style, "msi"))
+ goto msi;
+ if (!strcmp(ioat_interrupt_style, "intx"))
+ goto intx;
+ dev_err(dev, "invalid ioat_interrupt_style %s\n", ioat_interrupt_style);
+ goto err_no_irq;
+
+msix:
+ /* The number of MSI-X vectors should equal the number of channels */
+ msixcnt = device->common.chancnt;
+ for (i = 0; i < msixcnt; i++)
+ device->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(pdev, device->msix_entries, msixcnt);
+ if (err < 0)
+ goto msi;
+ if (err > 0)
+ goto msix_single_vector;
+
+ for (i = 0; i < msixcnt; i++) {
+ msix = &device->msix_entries[i];
+ chan = ioat_chan_by_index(device, i);
+ err = devm_request_irq(dev, msix->vector,
+ ioat_dma_do_interrupt_msix, 0,
+ "ioat-msix", chan);
+ if (err) {
+ for (j = 0; j < i; j++) {
+ msix = &device->msix_entries[j];
+ chan = ioat_chan_by_index(device, j);
+ devm_free_irq(dev, msix->vector, chan);
+ }
+ goto msix_single_vector;
+ }
+ }
+ intrctrl |= IOAT_INTRCTRL_MSIX_VECTOR_CONTROL;
+ goto done;
+
+msix_single_vector:
+ msix = &device->msix_entries[0];
+ msix->entry = 0;
+ err = pci_enable_msix(pdev, device->msix_entries, 1);
+ if (err)
+ goto msi;
+
+ err = devm_request_irq(dev, msix->vector, ioat_dma_do_interrupt, 0,
+ "ioat-msix", device);
+ if (err) {
+ pci_disable_msix(pdev);
+ goto msi;
+ }
+ goto done;
+
+msi:
+ err = pci_enable_msi(pdev);
+ if (err)
+ goto intx;
+
+ err = devm_request_irq(dev, pdev->irq, ioat_dma_do_interrupt, 0,
+ "ioat-msi", device);
+ if (err) {
+ pci_disable_msi(pdev);
+ goto intx;
+ }
+ goto done;
+
+intx:
+ err = devm_request_irq(dev, pdev->irq, ioat_dma_do_interrupt,
+ IRQF_SHARED, "ioat-intx", device);
+ if (err)
+ goto err_no_irq;
+
+done:
+ if (device->intr_quirk)
+ device->intr_quirk(device);
+ intrctrl |= IOAT_INTRCTRL_MASTER_INT_EN;
+ writeb(intrctrl, device->reg_base + IOAT_INTRCTRL_OFFSET);
+ return 0;
+
+err_no_irq:
+ /* Disable all interrupt generation */
+ writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
+ dev_err(dev, "no usable interrupts\n");
+ return err;
+}
+
+static void ioat_disable_interrupts(struct ioatdma_device *device)
+{
+ /* Disable all interrupt generation */
+ writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
+}
+
+int __devinit ioat_probe(struct ioatdma_device *device)
+{
+ int err = -ENODEV;
+ struct dma_device *dma = &device->common;
+ struct pci_dev *pdev = device->pdev;
+ struct device *dev = &pdev->dev;
+
+ /* DMA coherent memory pool for DMA descriptor allocations */
+ device->dma_pool = pci_pool_create("dma_desc_pool", pdev,
+ sizeof(struct ioat_dma_descriptor),
+ 64, 0);
+ if (!device->dma_pool) {
+ err = -ENOMEM;
+ goto err_dma_pool;
+ }
+
+ device->completion_pool = pci_pool_create("completion_pool", pdev,
+ sizeof(u64), SMP_CACHE_BYTES,
+ SMP_CACHE_BYTES);
+
+ if (!device->completion_pool) {
+ err = -ENOMEM;
+ goto err_completion_pool;
+ }
+
+ device->enumerate_channels(device);
+
+ dma_cap_set(DMA_MEMCPY, dma->cap_mask);
+ dma->dev = &pdev->dev;
+
+ if (!dma->chancnt) {
+ dev_err(dev, "zero channels detected\n");
+ goto err_setup_interrupts;
+ }
+
+ err = ioat_dma_setup_interrupts(device);
+ if (err)
+ goto err_setup_interrupts;
+
+ err = device->self_test(device);
+ if (err)
+ goto err_self_test;
+
+ return 0;
+
+err_self_test:
+ ioat_disable_interrupts(device);
+err_setup_interrupts:
+ pci_pool_destroy(device->completion_pool);
+err_completion_pool:
+ pci_pool_destroy(device->dma_pool);
+err_dma_pool:
+ return err;
+}
+
+int __devinit ioat_register(struct ioatdma_device *device)
+{
+ int err = dma_async_device_register(&device->common);
+
+ if (err) {
+ ioat_disable_interrupts(device);
+ pci_pool_destroy(device->completion_pool);
+ pci_pool_destroy(device->dma_pool);
+ }
+
+ return err;
+}
+
+/* ioat1_intr_quirk - fix up dma ctrl register to enable / disable msi */
+static void ioat1_intr_quirk(struct ioatdma_device *device)
+{
+ struct pci_dev *pdev = device->pdev;
+ u32 dmactrl;
+
+ pci_read_config_dword(pdev, IOAT_PCI_DMACTRL_OFFSET, &dmactrl);
+ if (pdev->msi_enabled)
+ dmactrl |= IOAT_PCI_DMACTRL_MSI_EN;
+ else
+ dmactrl &= ~IOAT_PCI_DMACTRL_MSI_EN;
+ pci_write_config_dword(pdev, IOAT_PCI_DMACTRL_OFFSET, dmactrl);
+}
+
+static ssize_t ring_size_show(struct dma_chan *c, char *page)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+
+ return sprintf(page, "%d\n", ioat->desccount);
+}
+static struct ioat_sysfs_entry ring_size_attr = __ATTR_RO(ring_size);
+
+static ssize_t ring_active_show(struct dma_chan *c, char *page)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+
+ return sprintf(page, "%d\n", ioat->active);
+}
+static struct ioat_sysfs_entry ring_active_attr = __ATTR_RO(ring_active);
+
+static ssize_t cap_show(struct dma_chan *c, char *page)
+{
+ struct dma_device *dma = c->device;
+
+ return sprintf(page, "copy%s%s%s%s%s%s\n",
+ dma_has_cap(DMA_PQ, dma->cap_mask) ? " pq" : "",
+ dma_has_cap(DMA_PQ_VAL, dma->cap_mask) ? " pq_val" : "",
+ dma_has_cap(DMA_XOR, dma->cap_mask) ? " xor" : "",
+ dma_has_cap(DMA_XOR_VAL, dma->cap_mask) ? " xor_val" : "",
+ dma_has_cap(DMA_MEMSET, dma->cap_mask) ? " fill" : "",
+ dma_has_cap(DMA_INTERRUPT, dma->cap_mask) ? " intr" : "");
+
+}
+struct ioat_sysfs_entry ioat_cap_attr = __ATTR_RO(cap);
+
+static ssize_t version_show(struct dma_chan *c, char *page)
+{
+ struct dma_device *dma = c->device;
+ struct ioatdma_device *device = to_ioatdma_device(dma);
+
+ return sprintf(page, "%d.%d\n",
+ device->version >> 4, device->version & 0xf);
+}
+struct ioat_sysfs_entry ioat_version_attr = __ATTR_RO(version);
+
+static struct attribute *ioat1_attrs[] = {
+ &ring_size_attr.attr,
+ &ring_active_attr.attr,
+ &ioat_cap_attr.attr,
+ &ioat_version_attr.attr,
+ NULL,
+};
+
+static ssize_t
+ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
+{
+ struct ioat_sysfs_entry *entry;
+ struct ioat_chan_common *chan;
+
+ entry = container_of(attr, struct ioat_sysfs_entry, attr);
+ chan = container_of(kobj, struct ioat_chan_common, kobj);
+
+ if (!entry->show)
+ return -EIO;
+ return entry->show(&chan->common, page);
+}
+
+struct sysfs_ops ioat_sysfs_ops = {
+ .show = ioat_attr_show,
+};
+
+static struct kobj_type ioat1_ktype = {
+ .sysfs_ops = &ioat_sysfs_ops,
+ .default_attrs = ioat1_attrs,
+};
+
+void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type)
+{
+ struct dma_device *dma = &device->common;
+ struct dma_chan *c;
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ struct ioat_chan_common *chan = to_chan_common(c);
+ struct kobject *parent = &c->dev->device.kobj;
+ int err;
+
+ err = kobject_init_and_add(&chan->kobj, type, parent, "quickdata");
+ if (err) {
+ dev_warn(to_dev(chan),
+ "sysfs init error (%d), continuing...\n", err);
+ kobject_put(&chan->kobj);
+ set_bit(IOAT_KOBJ_INIT_FAIL, &chan->state);
+ }
+ }
+}
+
+void ioat_kobject_del(struct ioatdma_device *device)
+{
+ struct dma_device *dma = &device->common;
+ struct dma_chan *c;
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ struct ioat_chan_common *chan = to_chan_common(c);
+
+ if (!test_bit(IOAT_KOBJ_INIT_FAIL, &chan->state)) {
+ kobject_del(&chan->kobj);
+ kobject_put(&chan->kobj);
+ }
+ }
+}
+
+int __devinit ioat1_dma_probe(struct ioatdma_device *device, int dca)
+{
+ struct pci_dev *pdev = device->pdev;
+ struct dma_device *dma;
+ int err;
+
+ device->intr_quirk = ioat1_intr_quirk;
+ device->enumerate_channels = ioat1_enumerate_channels;
+ device->self_test = ioat_dma_self_test;
+ dma = &device->common;
+ dma->device_prep_dma_memcpy = ioat1_dma_prep_memcpy;
+ dma->device_issue_pending = ioat1_dma_memcpy_issue_pending;
+ dma->device_alloc_chan_resources = ioat1_dma_alloc_chan_resources;
+ dma->device_free_chan_resources = ioat1_dma_free_chan_resources;
+ dma->device_is_tx_complete = ioat1_dma_is_complete;
+
+ err = ioat_probe(device);
+ if (err)
+ return err;
+ ioat_set_tcp_copy_break(4096);
+ err = ioat_register(device);
+ if (err)
+ return err;
+ ioat_kobject_add(device, &ioat1_ktype);
+
+ if (dca)
+ device->dca = ioat_dca_init(pdev, device->reg_base);
+
+ return err;
+}
+
+void __devexit ioat_dma_remove(struct ioatdma_device *device)
+{
+ struct dma_device *dma = &device->common;
+
+ ioat_disable_interrupts(device);
+
+ ioat_kobject_del(device);
+
+ dma_async_device_unregister(dma);
+
+ pci_pool_destroy(device->dma_pool);
+ pci_pool_destroy(device->completion_pool);
+
+ INIT_LIST_HEAD(&dma->channels);
+}
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef IOATDMA_H
+#define IOATDMA_H
+
+#include <linux/dmaengine.h>
+#include "hw.h"
+#include "registers.h"
+#include <linux/init.h>
+#include <linux/dmapool.h>
+#include <linux/cache.h>
+#include <linux/pci_ids.h>
+#include <net/tcp.h>
+
+#define IOAT_DMA_VERSION "4.00"
+
+#define IOAT_LOW_COMPLETION_MASK 0xffffffc0
+#define IOAT_DMA_DCA_ANY_CPU ~0
+
+#define to_ioatdma_device(dev) container_of(dev, struct ioatdma_device, common)
+#define to_ioat_desc(lh) container_of(lh, struct ioat_desc_sw, node)
+#define tx_to_ioat_desc(tx) container_of(tx, struct ioat_desc_sw, txd)
+#define to_dev(ioat_chan) (&(ioat_chan)->device->pdev->dev)
+
+#define chan_num(ch) ((int)((ch)->reg_base - (ch)->device->reg_base) / 0x80)
+
+/*
+ * workaround for IOAT ver.3.0 null descriptor issue
+ * (channel returns error when size is 0)
+ */
+#define NULL_DESC_BUFFER_SIZE 1
+
+/**
+ * struct ioatdma_device - internal representation of a IOAT device
+ * @pdev: PCI-Express device
+ * @reg_base: MMIO register space base address
+ * @dma_pool: for allocating DMA descriptors
+ * @common: embedded struct dma_device
+ * @version: version of ioatdma device
+ * @msix_entries: irq handlers
+ * @idx: per channel data
+ * @dca: direct cache access context
+ * @intr_quirk: interrupt setup quirk (for ioat_v1 devices)
+ * @enumerate_channels: hw version specific channel enumeration
+ * @cleanup_tasklet: select between the v2 and v3 cleanup routines
+ * @timer_fn: select between the v2 and v3 timer watchdog routines
+ * @self_test: hardware version specific self test for each supported op type
+ *
+ * Note: the v3 cleanup routine supports raid operations
+ */
+struct ioatdma_device {
+ struct pci_dev *pdev;
+ void __iomem *reg_base;
+ struct pci_pool *dma_pool;
+ struct pci_pool *completion_pool;
+ struct dma_device common;
+ u8 version;
+ struct msix_entry msix_entries[4];
+ struct ioat_chan_common *idx[4];
+ struct dca_provider *dca;
+ void (*intr_quirk)(struct ioatdma_device *device);
+ int (*enumerate_channels)(struct ioatdma_device *device);
+ void (*cleanup_tasklet)(unsigned long data);
+ void (*timer_fn)(unsigned long data);
+ int (*self_test)(struct ioatdma_device *device);
+};
+
+struct ioat_chan_common {
+ struct dma_chan common;
+ void __iomem *reg_base;
+ unsigned long last_completion;
+ spinlock_t cleanup_lock;
+ dma_cookie_t completed_cookie;
+ unsigned long state;
+ #define IOAT_COMPLETION_PENDING 0
+ #define IOAT_COMPLETION_ACK 1
+ #define IOAT_RESET_PENDING 2
+ #define IOAT_KOBJ_INIT_FAIL 3
+ struct timer_list timer;
+ #define COMPLETION_TIMEOUT msecs_to_jiffies(100)
+ #define IDLE_TIMEOUT msecs_to_jiffies(2000)
+ #define RESET_DELAY msecs_to_jiffies(100)
+ struct ioatdma_device *device;
+ dma_addr_t completion_dma;
+ u64 *completion;
+ struct tasklet_struct cleanup_task;
+ struct kobject kobj;
+};
+
+struct ioat_sysfs_entry {
+ struct attribute attr;
+ ssize_t (*show)(struct dma_chan *, char *);
+};
+
+/**
+ * struct ioat_dma_chan - internal representation of a DMA channel
+ */
+struct ioat_dma_chan {
+ struct ioat_chan_common base;
+
+ size_t xfercap; /* XFERCAP register value expanded out */
+
+ spinlock_t desc_lock;
+ struct list_head free_desc;
+ struct list_head used_desc;
+
+ int pending;
+ u16 desccount;
+ u16 active;
+};
+
+static inline struct ioat_chan_common *to_chan_common(struct dma_chan *c)
+{
+ return container_of(c, struct ioat_chan_common, common);
+}
+
+static inline struct ioat_dma_chan *to_ioat_chan(struct dma_chan *c)
+{
+ struct ioat_chan_common *chan = to_chan_common(c);
+
+ return container_of(chan, struct ioat_dma_chan, base);
+}
+
+/**
+ * ioat_is_complete - poll the status of an ioat transaction
+ * @c: channel handle
+ * @cookie: transaction identifier
+ * @done: if set, updated with last completed transaction
+ * @used: if set, updated with last used transaction
+ */
+static inline enum dma_status
+ioat_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat_chan_common *chan = to_chan_common(c);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+
+ last_used = c->cookie;
+ last_complete = chan->completed_cookie;
+
+ if (done)
+ *done = last_complete;
+ if (used)
+ *used = last_used;
+
+ return dma_async_is_complete(cookie, last_complete, last_used);
+}
+
+/* wrapper around hardware descriptor format + additional software fields */
+
+/**
+ * struct ioat_desc_sw - wrapper around hardware descriptor
+ * @hw: hardware DMA descriptor (for memcpy)
+ * @node: this descriptor will either be on the free list,
+ * or attached to a transaction list (tx_list)
+ * @txd: the generic software descriptor for all engines
+ * @id: identifier for debug
+ */
+struct ioat_desc_sw {
+ struct ioat_dma_descriptor *hw;
+ struct list_head node;
+ size_t len;
+ struct list_head tx_list;
+ struct dma_async_tx_descriptor txd;
+ #ifdef DEBUG
+ int id;
+ #endif
+};
+
+#ifdef DEBUG
+#define set_desc_id(desc, i) ((desc)->id = (i))
+#define desc_id(desc) ((desc)->id)
+#else
+#define set_desc_id(desc, i)
+#define desc_id(desc) (0)
+#endif
+
+static inline void
+__dump_desc_dbg(struct ioat_chan_common *chan, struct ioat_dma_descriptor *hw,
+ struct dma_async_tx_descriptor *tx, int id)
+{
+ struct device *dev = to_dev(chan);
+
+ dev_dbg(dev, "desc[%d]: (%#llx->%#llx) cookie: %d flags: %#x"
+ " ctl: %#x (op: %d int_en: %d compl: %d)\n", id,
+ (unsigned long long) tx->phys,
+ (unsigned long long) hw->next, tx->cookie, tx->flags,
+ hw->ctl, hw->ctl_f.op, hw->ctl_f.int_en, hw->ctl_f.compl_write);
+}
+
+#define dump_desc_dbg(c, d) \
+ ({ if (d) __dump_desc_dbg(&c->base, d->hw, &d->txd, desc_id(d)); 0; })
+
+static inline void ioat_set_tcp_copy_break(unsigned long copybreak)
+{
+ #ifdef CONFIG_NET_DMA
+ sysctl_tcp_dma_copybreak = copybreak;
+ #endif
+}
+
+static inline struct ioat_chan_common *
+ioat_chan_by_index(struct ioatdma_device *device, int index)
+{
+ return device->idx[index];
+}
+
+static inline u64 ioat_chansts(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+ u64 status;
+ u32 status_lo;
+
+ /* We need to read the low address first as this causes the
+ * chipset to latch the upper bits for the subsequent read
+ */
+ status_lo = readl(chan->reg_base + IOAT_CHANSTS_OFFSET_LOW(ver));
+ status = readl(chan->reg_base + IOAT_CHANSTS_OFFSET_HIGH(ver));
+ status <<= 32;
+ status |= status_lo;
+
+ return status;
+}
+
+static inline void ioat_start(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+
+ writeb(IOAT_CHANCMD_START, chan->reg_base + IOAT_CHANCMD_OFFSET(ver));
+}
+
+static inline u64 ioat_chansts_to_addr(u64 status)
+{
+ return status & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
+}
+
+static inline u32 ioat_chanerr(struct ioat_chan_common *chan)
+{
+ return readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+}
+
+static inline void ioat_suspend(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+
+ writeb(IOAT_CHANCMD_SUSPEND, chan->reg_base + IOAT_CHANCMD_OFFSET(ver));
+}
+
+static inline void ioat_set_chainaddr(struct ioat_dma_chan *ioat, u64 addr)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ writel(addr & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
+ writel(addr >> 32,
+ chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
+}
+
+static inline bool is_ioat_active(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_ACTIVE);
+}
+
+static inline bool is_ioat_idle(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_DONE);
+}
+
+static inline bool is_ioat_halted(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_HALTED);
+}
+
+static inline bool is_ioat_suspended(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_SUSPENDED);
+}
+
+/* channel was fatally programmed */
+static inline bool is_ioat_bug(unsigned long err)
+{
+ return !!(err & (IOAT_CHANERR_SRC_ADDR_ERR|IOAT_CHANERR_DEST_ADDR_ERR|
+ IOAT_CHANERR_NEXT_ADDR_ERR|IOAT_CHANERR_CONTROL_ERR|
+ IOAT_CHANERR_LENGTH_ERR));
+}
+
+static inline void ioat_unmap(struct pci_dev *pdev, dma_addr_t addr, size_t len,
+ int direction, enum dma_ctrl_flags flags, bool dst)
+{
+ if ((dst && (flags & DMA_COMPL_DEST_UNMAP_SINGLE)) ||
+ (!dst && (flags & DMA_COMPL_SRC_UNMAP_SINGLE)))
+ pci_unmap_single(pdev, addr, len, direction);
+ else
+ pci_unmap_page(pdev, addr, len, direction);
+}
+
+int __devinit ioat_probe(struct ioatdma_device *device);
+int __devinit ioat_register(struct ioatdma_device *device);
+int __devinit ioat1_dma_probe(struct ioatdma_device *dev, int dca);
+int __devinit ioat_dma_self_test(struct ioatdma_device *device);
+void __devexit ioat_dma_remove(struct ioatdma_device *device);
+struct dca_provider * __devinit ioat_dca_init(struct pci_dev *pdev,
+ void __iomem *iobase);
+unsigned long ioat_get_current_completion(struct ioat_chan_common *chan);
+void ioat_init_channel(struct ioatdma_device *device,
+ struct ioat_chan_common *chan, int idx,
+ void (*timer_fn)(unsigned long),
+ void (*tasklet)(unsigned long),
+ unsigned long ioat);
+void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags,
+ size_t len, struct ioat_dma_descriptor *hw);
+bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
+ unsigned long *phys_complete);
+void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
+void ioat_kobject_del(struct ioatdma_device *device);
+extern struct sysfs_ops ioat_sysfs_ops;
+extern struct ioat_sysfs_entry ioat_version_attr;
+extern struct ioat_sysfs_entry ioat_cap_attr;
+#endif /* IOATDMA_H */
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2004 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+/*
+ * This driver supports an Intel I/OAT DMA engine (versions >= 2), which
+ * does asynchronous data movement and checksumming operations.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+#include <linux/i7300_idle.h>
+#include "dma.h"
+#include "dma_v2.h"
+#include "registers.h"
+#include "hw.h"
+
+int ioat_ring_alloc_order = 8;
+module_param(ioat_ring_alloc_order, int, 0644);
+MODULE_PARM_DESC(ioat_ring_alloc_order,
+ "ioat2+: allocate 2^n descriptors per channel"
+ " (default: 8 max: 16)");
+static int ioat_ring_max_alloc_order = IOAT_MAX_ORDER;
+module_param(ioat_ring_max_alloc_order, int, 0644);
+MODULE_PARM_DESC(ioat_ring_max_alloc_order,
+ "ioat2+: upper limit for ring size (default: 16)");
+
+void __ioat2_issue_pending(struct ioat2_dma_chan *ioat)
+{
+ void * __iomem reg_base = ioat->base.reg_base;
+
+ ioat->pending = 0;
+ ioat->dmacount += ioat2_ring_pending(ioat);
+ ioat->issued = ioat->head;
+ /* make descriptor updates globally visible before notifying channel */
+ wmb();
+ writew(ioat->dmacount, reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
+ dev_dbg(to_dev(&ioat->base),
+ "%s: head: %#x tail: %#x issued: %#x count: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued, ioat->dmacount);
+}
+
+void ioat2_issue_pending(struct dma_chan *chan)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(chan);
+
+ spin_lock_bh(&ioat->ring_lock);
+ if (ioat->pending == 1)
+ __ioat2_issue_pending(ioat);
+ spin_unlock_bh(&ioat->ring_lock);
+}
+
+/**
+ * ioat2_update_pending - log pending descriptors
+ * @ioat: ioat2+ channel
+ *
+ * set pending to '1' unless pending is already set to '2', pending == 2
+ * indicates that submission is temporarily blocked due to an in-flight
+ * reset. If we are already above the ioat_pending_level threshold then
+ * just issue pending.
+ *
+ * called with ring_lock held
+ */
+static void ioat2_update_pending(struct ioat2_dma_chan *ioat)
+{
+ if (unlikely(ioat->pending == 2))
+ return;
+ else if (ioat2_ring_pending(ioat) > ioat_pending_level)
+ __ioat2_issue_pending(ioat);
+ else
+ ioat->pending = 1;
+}
+
+static void __ioat2_start_null_desc(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_ring_ent *desc;
+ struct ioat_dma_descriptor *hw;
+ int idx;
+
+ if (ioat2_ring_space(ioat) < 1) {
+ dev_err(to_dev(&ioat->base),
+ "Unable to start null desc - ring full\n");
+ return;
+ }
+
+ dev_dbg(to_dev(&ioat->base), "%s: head: %#x tail: %#x issued: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued);
+ idx = ioat2_desc_alloc(ioat, 1);
+ desc = ioat2_get_ring_ent(ioat, idx);
+
+ hw = desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = 1;
+ hw->ctl_f.compl_write = 1;
+ /* set size to non-zero value (channel returns error when size is 0) */
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ hw->src_addr = 0;
+ hw->dst_addr = 0;
+ async_tx_ack(&desc->txd);
+ ioat2_set_chainaddr(ioat, desc->txd.phys);
+ dump_desc_dbg(ioat, desc);
+ __ioat2_issue_pending(ioat);
+}
+
+static void ioat2_start_null_desc(struct ioat2_dma_chan *ioat)
+{
+ spin_lock_bh(&ioat->ring_lock);
+ __ioat2_start_null_desc(ioat);
+ spin_unlock_bh(&ioat->ring_lock);
+}
+
+static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct dma_async_tx_descriptor *tx;
+ struct ioat_ring_ent *desc;
+ bool seen_current = false;
+ u16 active;
+ int i;
+
+ dev_dbg(to_dev(chan), "%s: head: %#x tail: %#x issued: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued);
+
+ active = ioat2_ring_active(ioat);
+ for (i = 0; i < active && !seen_current; i++) {
+ prefetch(ioat2_get_ring_ent(ioat, ioat->tail + i + 1));
+ desc = ioat2_get_ring_ent(ioat, ioat->tail + i);
+ tx = &desc->txd;
+ dump_desc_dbg(ioat, desc);
+ if (tx->cookie) {
+ ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw);
+ chan->completed_cookie = tx->cookie;
+ tx->cookie = 0;
+ if (tx->callback) {
+ tx->callback(tx->callback_param);
+ tx->callback = NULL;
+ }
+ }
+
+ if (tx->phys == phys_complete)
+ seen_current = true;
+ }
+ ioat->tail += i;
+ BUG_ON(!seen_current); /* no active descs have written a completion? */
+
+ chan->last_completion = phys_complete;
+ if (ioat->head == ioat->tail) {
+ dev_dbg(to_dev(chan), "%s: cancel completion timeout\n",
+ __func__);
+ clear_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+}
+
+/**
+ * ioat2_cleanup - clean finished descriptors (advance tail pointer)
+ * @chan: ioat channel to be cleaned up
+ */
+static void ioat2_cleanup(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+
+ prefetch(chan->completion);
+
+ if (!spin_trylock_bh(&chan->cleanup_lock))
+ return;
+
+ if (!ioat_cleanup_preamble(chan, &phys_complete)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ if (!spin_trylock_bh(&ioat->ring_lock)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ __cleanup(ioat, phys_complete);
+
+ spin_unlock_bh(&ioat->ring_lock);
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+void ioat2_cleanup_tasklet(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+
+ ioat2_cleanup(ioat);
+ writew(IOAT_CHANCTRL_RUN, ioat->base.reg_base + IOAT_CHANCTRL_OFFSET);
+}
+
+void __ioat2_restart_chan(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ /* set the tail to be re-issued */
+ ioat->issued = ioat->tail;
+ ioat->dmacount = 0;
+ set_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+
+ dev_dbg(to_dev(chan),
+ "%s: head: %#x tail: %#x issued: %#x count: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued, ioat->dmacount);
+
+ if (ioat2_ring_pending(ioat)) {
+ struct ioat_ring_ent *desc;
+
+ desc = ioat2_get_ring_ent(ioat, ioat->tail);
+ ioat2_set_chainaddr(ioat, desc->txd.phys);
+ __ioat2_issue_pending(ioat);
+ } else
+ __ioat2_start_null_desc(ioat);
+}
+
+static void ioat2_restart_channel(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+ u32 status;
+
+ status = ioat_chansts(chan);
+ if (is_ioat_active(status) || is_ioat_idle(status))
+ ioat_suspend(chan);
+ while (is_ioat_active(status) || is_ioat_idle(status)) {
+ status = ioat_chansts(chan);
+ cpu_relax();
+ }
+
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+
+ __ioat2_restart_chan(ioat);
+}
+
+void ioat2_timer_event(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+ struct ioat_chan_common *chan = &ioat->base;
+
+ spin_lock_bh(&chan->cleanup_lock);
+ if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
+ unsigned long phys_complete;
+ u64 status;
+
+ spin_lock_bh(&ioat->ring_lock);
+ status = ioat_chansts(chan);
+
+ /* when halted due to errors check for channel
+ * programming errors before advancing the completion state
+ */
+ if (is_ioat_halted(status)) {
+ u32 chanerr;
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ BUG_ON(is_ioat_bug(chanerr));
+ }
+
+ /* if we haven't made progress and we have already
+ * acknowledged a pending completion once, then be more
+ * forceful with a restart
+ */
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+ else if (test_bit(IOAT_COMPLETION_ACK, &chan->state))
+ ioat2_restart_channel(ioat);
+ else {
+ set_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ }
+ spin_unlock_bh(&ioat->ring_lock);
+ } else {
+ u16 active;
+
+ /* if the ring is idle, empty, and oversized try to step
+ * down the size
+ */
+ spin_lock_bh(&ioat->ring_lock);
+ active = ioat2_ring_active(ioat);
+ if (active == 0 && ioat->alloc_order > ioat_get_alloc_order())
+ reshape_ring(ioat, ioat->alloc_order-1);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ /* keep shrinking until we get back to our minimum
+ * default size
+ */
+ if (ioat->alloc_order > ioat_get_alloc_order())
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+/**
+ * ioat2_enumerate_channels - find and initialize the device's channels
+ * @device: the device to be enumerated
+ */
+int ioat2_enumerate_channels(struct ioatdma_device *device)
+{
+ struct ioat2_dma_chan *ioat;
+ struct device *dev = &device->pdev->dev;
+ struct dma_device *dma = &device->common;
+ u8 xfercap_log;
+ int i;
+
+ INIT_LIST_HEAD(&dma->channels);
+ dma->chancnt = readb(device->reg_base + IOAT_CHANCNT_OFFSET);
+ dma->chancnt &= 0x1f; /* bits [4:0] valid */
+ if (dma->chancnt > ARRAY_SIZE(device->idx)) {
+ dev_warn(dev, "(%d) exceeds max supported channels (%zu)\n",
+ dma->chancnt, ARRAY_SIZE(device->idx));
+ dma->chancnt = ARRAY_SIZE(device->idx);
+ }
+ xfercap_log = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
+ xfercap_log &= 0x1f; /* bits [4:0] valid */
+ if (xfercap_log == 0)
+ return 0;
+ dev_dbg(dev, "%s: xfercap = %d\n", __func__, 1 << xfercap_log);
+
+ /* FIXME which i/oat version is i7300? */
+#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0)
+ dma->chancnt--;
+#endif
+ for (i = 0; i < dma->chancnt; i++) {
+ ioat = devm_kzalloc(dev, sizeof(*ioat), GFP_KERNEL);
+ if (!ioat)
+ break;
+
+ ioat_init_channel(device, &ioat->base, i,
+ device->timer_fn,
+ device->cleanup_tasklet,
+ (unsigned long) ioat);
+ ioat->xfercap_log = xfercap_log;
+ spin_lock_init(&ioat->ring_lock);
+ }
+ dma->chancnt = i;
+ return i;
+}
+
+static dma_cookie_t ioat2_tx_submit_unlock(struct dma_async_tx_descriptor *tx)
+{
+ struct dma_chan *c = tx->chan;
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ dma_cookie_t cookie = c->cookie;
+
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+ tx->cookie = cookie;
+ c->cookie = cookie;
+ dev_dbg(to_dev(&ioat->base), "%s: cookie: %d\n", __func__, cookie);
+
+ if (!test_and_set_bit(IOAT_COMPLETION_PENDING, &chan->state))
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ ioat2_update_pending(ioat);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ return cookie;
+}
+
+static struct ioat_ring_ent *ioat2_alloc_ring_ent(struct dma_chan *chan, gfp_t flags)
+{
+ struct ioat_dma_descriptor *hw;
+ struct ioat_ring_ent *desc;
+ struct ioatdma_device *dma;
+ dma_addr_t phys;
+
+ dma = to_ioatdma_device(chan->device);
+ hw = pci_pool_alloc(dma->dma_pool, flags, &phys);
+ if (!hw)
+ return NULL;
+ memset(hw, 0, sizeof(*hw));
+
+ desc = kmem_cache_alloc(ioat2_cache, flags);
+ if (!desc) {
+ pci_pool_free(dma->dma_pool, hw, phys);
+ return NULL;
+ }
+ memset(desc, 0, sizeof(*desc));
+
+ dma_async_tx_descriptor_init(&desc->txd, chan);
+ desc->txd.tx_submit = ioat2_tx_submit_unlock;
+ desc->hw = hw;
+ desc->txd.phys = phys;
+ return desc;
+}
+
+static void ioat2_free_ring_ent(struct ioat_ring_ent *desc, struct dma_chan *chan)
+{
+ struct ioatdma_device *dma;
+
+ dma = to_ioatdma_device(chan->device);
+ pci_pool_free(dma->dma_pool, desc->hw, desc->txd.phys);
+ kmem_cache_free(ioat2_cache, desc);
+}
+
+static struct ioat_ring_ent **ioat2_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
+{
+ struct ioat_ring_ent **ring;
+ int descs = 1 << order;
+ int i;
+
+ if (order > ioat_get_max_alloc_order())
+ return NULL;
+
+ /* allocate the array to hold the software ring */
+ ring = kcalloc(descs, sizeof(*ring), flags);
+ if (!ring)
+ return NULL;
+ for (i = 0; i < descs; i++) {
+ ring[i] = ioat2_alloc_ring_ent(c, flags);
+ if (!ring[i]) {
+ while (i--)
+ ioat2_free_ring_ent(ring[i], c);
+ kfree(ring);
+ return NULL;
+ }
+ set_desc_id(ring[i], i);
+ }
+
+ /* link descs */
+ for (i = 0; i < descs-1; i++) {
+ struct ioat_ring_ent *next = ring[i+1];
+ struct ioat_dma_descriptor *hw = ring[i]->hw;
+
+ hw->next = next->txd.phys;
+ }
+ ring[i]->hw->next = ring[0]->txd.phys;
+
+ return ring;
+}
+
+/* ioat2_alloc_chan_resources - allocate/initialize ioat2 descriptor ring
+ * @chan: channel to be initialized
+ */
+int ioat2_alloc_chan_resources(struct dma_chan *c)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_ring_ent **ring;
+ u32 chanerr;
+ int order;
+
+ /* have we already been set up? */
+ if (ioat->ring)
+ return 1 << ioat->alloc_order;
+
+ /* Setup register to interrupt and write completion status on error */
+ writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET);
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ if (chanerr) {
+ dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr);
+ writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
+ }
+
+ /* allocate a completion writeback area */
+ /* doing 2 32bit writes to mmio since 1 64b write doesn't work */
+ chan->completion = pci_pool_alloc(chan->device->completion_pool,
+ GFP_KERNEL, &chan->completion_dma);
+ if (!chan->completion)
+ return -ENOMEM;
+
+ memset(chan->completion, 0, sizeof(*chan->completion));
+ writel(((u64) chan->completion_dma) & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_LOW);
+ writel(((u64) chan->completion_dma) >> 32,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
+
+ order = ioat_get_alloc_order();
+ ring = ioat2_alloc_ring(c, order, GFP_KERNEL);
+ if (!ring)
+ return -ENOMEM;
+
+ spin_lock_bh(&ioat->ring_lock);
+ ioat->ring = ring;
+ ioat->head = 0;
+ ioat->issued = 0;
+ ioat->tail = 0;
+ ioat->pending = 0;
+ ioat->alloc_order = order;
+ spin_unlock_bh(&ioat->ring_lock);
+
+ tasklet_enable(&chan->cleanup_task);
+ ioat2_start_null_desc(ioat);
+
+ return 1 << ioat->alloc_order;
+}
+
+bool reshape_ring(struct ioat2_dma_chan *ioat, int order)
+{
+ /* reshape differs from normal ring allocation in that we want
+ * to allocate a new software ring while only
+ * extending/truncating the hardware ring
+ */
+ struct ioat_chan_common *chan = &ioat->base;
+ struct dma_chan *c = &chan->common;
+ const u16 curr_size = ioat2_ring_mask(ioat) + 1;
+ const u16 active = ioat2_ring_active(ioat);
+ const u16 new_size = 1 << order;
+ struct ioat_ring_ent **ring;
+ u16 i;
+
+ if (order > ioat_get_max_alloc_order())
+ return false;
+
+ /* double check that we have at least 1 free descriptor */
+ if (active == curr_size)
+ return false;
+
+ /* when shrinking, verify that we can hold the current active
+ * set in the new ring
+ */
+ if (active >= new_size)
+ return false;
+
+ /* allocate the array to hold the software ring */
+ ring = kcalloc(new_size, sizeof(*ring), GFP_NOWAIT);
+ if (!ring)
+ return false;
+
+ /* allocate/trim descriptors as needed */
+ if (new_size > curr_size) {
+ /* copy current descriptors to the new ring */
+ for (i = 0; i < curr_size; i++) {
+ u16 curr_idx = (ioat->tail+i) & (curr_size-1);
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ring[new_idx] = ioat->ring[curr_idx];
+ set_desc_id(ring[new_idx], new_idx);
+ }
+
+ /* add new descriptors to the ring */
+ for (i = curr_size; i < new_size; i++) {
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ring[new_idx] = ioat2_alloc_ring_ent(c, GFP_NOWAIT);
+ if (!ring[new_idx]) {
+ while (i--) {
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ioat2_free_ring_ent(ring[new_idx], c);
+ }
+ kfree(ring);
+ return false;
+ }
+ set_desc_id(ring[new_idx], new_idx);
+ }
+
+ /* hw link new descriptors */
+ for (i = curr_size-1; i < new_size; i++) {
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+ struct ioat_ring_ent *next = ring[(new_idx+1) & (new_size-1)];
+ struct ioat_dma_descriptor *hw = ring[new_idx]->hw;
+
+ hw->next = next->txd.phys;
+ }
+ } else {
+ struct ioat_dma_descriptor *hw;
+ struct ioat_ring_ent *next;
+
+ /* copy current descriptors to the new ring, dropping the
+ * removed descriptors
+ */
+ for (i = 0; i < new_size; i++) {
+ u16 curr_idx = (ioat->tail+i) & (curr_size-1);
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ring[new_idx] = ioat->ring[curr_idx];
+ set_desc_id(ring[new_idx], new_idx);
+ }
+
+ /* free deleted descriptors */
+ for (i = new_size; i < curr_size; i++) {
+ struct ioat_ring_ent *ent;
+
+ ent = ioat2_get_ring_ent(ioat, ioat->tail+i);
+ ioat2_free_ring_ent(ent, c);
+ }
+
+ /* fix up hardware ring */
+ hw = ring[(ioat->tail+new_size-1) & (new_size-1)]->hw;
+ next = ring[(ioat->tail+new_size) & (new_size-1)];
+ hw->next = next->txd.phys;
+ }
+
+ dev_dbg(to_dev(chan), "%s: allocated %d descriptors\n",
+ __func__, new_size);
+
+ kfree(ioat->ring);
+ ioat->ring = ring;
+ ioat->alloc_order = order;
+
+ return true;
+}
+
+/**
+ * ioat2_alloc_and_lock - common descriptor alloc boilerplate for ioat2,3 ops
+ * @idx: gets starting descriptor index on successful allocation
+ * @ioat: ioat2,3 channel (ring) to operate on
+ * @num_descs: allocation length
+ */
+int ioat2_alloc_and_lock(u16 *idx, struct ioat2_dma_chan *ioat, int num_descs)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ spin_lock_bh(&ioat->ring_lock);
+ /* never allow the last descriptor to be consumed, we need at
+ * least one free at all times to allow for on-the-fly ring
+ * resizing.
+ */
+ while (unlikely(ioat2_ring_space(ioat) <= num_descs)) {
+ if (reshape_ring(ioat, ioat->alloc_order + 1) &&
+ ioat2_ring_space(ioat) > num_descs)
+ break;
+
+ if (printk_ratelimit())
+ dev_dbg(to_dev(chan),
+ "%s: ring full! num_descs: %d (%x:%x:%x)\n",
+ __func__, num_descs, ioat->head, ioat->tail,
+ ioat->issued);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ /* progress reclaim in the allocation failure case we
+ * may be called under bh_disabled so we need to trigger
+ * the timer event directly
+ */
+ spin_lock_bh(&chan->cleanup_lock);
+ if (jiffies > chan->timer.expires &&
+ timer_pending(&chan->timer)) {
+ struct ioatdma_device *device = chan->device;
+
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ spin_unlock_bh(&chan->cleanup_lock);
+ device->timer_fn((unsigned long) ioat);
+ } else
+ spin_unlock_bh(&chan->cleanup_lock);
+ return -ENOMEM;
+ }
+
+ dev_dbg(to_dev(chan), "%s: num_descs: %d (%x:%x:%x)\n",
+ __func__, num_descs, ioat->head, ioat->tail, ioat->issued);
+
+ *idx = ioat2_desc_alloc(ioat, num_descs);
+ return 0; /* with ioat->ring_lock held */
+}
+
+struct dma_async_tx_descriptor *
+ioat2_dma_prep_memcpy_lock(struct dma_chan *c, dma_addr_t dma_dest,
+ dma_addr_t dma_src, size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_dma_descriptor *hw;
+ struct ioat_ring_ent *desc;
+ dma_addr_t dst = dma_dest;
+ dma_addr_t src = dma_src;
+ size_t total_len = len;
+ int num_descs;
+ u16 idx;
+ int i;
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ size_t copy = min_t(size_t, len, 1 << ioat->xfercap_log);
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ hw = desc->hw;
+
+ hw->size = copy;
+ hw->ctl = 0;
+ hw->src_addr = src;
+ hw->dst_addr = dst;
+
+ len -= copy;
+ dst += copy;
+ src += copy;
+ dump_desc_dbg(ioat, desc);
+ } while (++i < num_descs);
+
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ hw->ctl_f.compl_write = 1;
+ dump_desc_dbg(ioat, desc);
+ /* we leave the channel locked to ensure in order submission */
+
+ return &desc->txd;
+}
+
+/**
+ * ioat2_free_chan_resources - release all the descriptors
+ * @chan: the channel to be cleaned
+ */
+void ioat2_free_chan_resources(struct dma_chan *c)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioatdma_device *device = chan->device;
+ struct ioat_ring_ent *desc;
+ const u16 total_descs = 1 << ioat->alloc_order;
+ int descs;
+ int i;
+
+ /* Before freeing channel resources first check
+ * if they have been previously allocated for this channel.
+ */
+ if (!ioat->ring)
+ return;
+
+ tasklet_disable(&chan->cleanup_task);
+ del_timer_sync(&chan->timer);
+ device->cleanup_tasklet((unsigned long) ioat);
+
+ /* Delay 100ms after reset to allow internal DMA logic to quiesce
+ * before removing DMA descriptor resources.
+ */
+ writeb(IOAT_CHANCMD_RESET,
+ chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version));
+ mdelay(100);
+
+ spin_lock_bh(&ioat->ring_lock);
+ descs = ioat2_ring_space(ioat);
+ dev_dbg(to_dev(chan), "freeing %d idle descriptors\n", descs);
+ for (i = 0; i < descs; i++) {
+ desc = ioat2_get_ring_ent(ioat, ioat->head + i);
+ ioat2_free_ring_ent(desc, c);
+ }
+
+ if (descs < total_descs)
+ dev_err(to_dev(chan), "Freeing %d in use descriptors!\n",
+ total_descs - descs);
+
+ for (i = 0; i < total_descs - descs; i++) {
+ desc = ioat2_get_ring_ent(ioat, ioat->tail + i);
+ dump_desc_dbg(ioat, desc);
+ ioat2_free_ring_ent(desc, c);
+ }
+
+ kfree(ioat->ring);
+ ioat->ring = NULL;
+ ioat->alloc_order = 0;
+ pci_pool_free(device->completion_pool, chan->completion,
+ chan->completion_dma);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ chan->last_completion = 0;
+ chan->completion_dma = 0;
+ ioat->pending = 0;
+ ioat->dmacount = 0;
+}
+
+enum dma_status
+ioat2_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioatdma_device *device = ioat->base.device;
+
+ if (ioat_is_complete(c, cookie, done, used) == DMA_SUCCESS)
+ return DMA_SUCCESS;
+
+ device->cleanup_tasklet((unsigned long) ioat);
+
+ return ioat_is_complete(c, cookie, done, used);
+}
+
+static ssize_t ring_size_show(struct dma_chan *c, char *page)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+
+ return sprintf(page, "%d\n", (1 << ioat->alloc_order) & ~1);
+}
+static struct ioat_sysfs_entry ring_size_attr = __ATTR_RO(ring_size);
+
+static ssize_t ring_active_show(struct dma_chan *c, char *page)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+
+ /* ...taken outside the lock, no need to be precise */
+ return sprintf(page, "%d\n", ioat2_ring_active(ioat));
+}
+static struct ioat_sysfs_entry ring_active_attr = __ATTR_RO(ring_active);
+
+static struct attribute *ioat2_attrs[] = {
+ &ring_size_attr.attr,
+ &ring_active_attr.attr,
+ &ioat_cap_attr.attr,
+ &ioat_version_attr.attr,
+ NULL,
+};
+
+struct kobj_type ioat2_ktype = {
+ .sysfs_ops = &ioat_sysfs_ops,
+ .default_attrs = ioat2_attrs,
+};
+
+int __devinit ioat2_dma_probe(struct ioatdma_device *device, int dca)
+{
+ struct pci_dev *pdev = device->pdev;
+ struct dma_device *dma;
+ struct dma_chan *c;
+ struct ioat_chan_common *chan;
+ int err;
+
+ device->enumerate_channels = ioat2_enumerate_channels;
+ device->cleanup_tasklet = ioat2_cleanup_tasklet;
+ device->timer_fn = ioat2_timer_event;
+ device->self_test = ioat_dma_self_test;
+ dma = &device->common;
+ dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock;
+ dma->device_issue_pending = ioat2_issue_pending;
+ dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
+ dma->device_free_chan_resources = ioat2_free_chan_resources;
+ dma->device_is_tx_complete = ioat2_is_complete;
+
+ err = ioat_probe(device);
+ if (err)
+ return err;
+ ioat_set_tcp_copy_break(2048);
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ chan = to_chan_common(c);
+ writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE | IOAT_DMA_DCA_ANY_CPU,
+ chan->reg_base + IOAT_DCACTRL_OFFSET);
+ }
+
+ err = ioat_register(device);
+ if (err)
+ return err;
+
+ ioat_kobject_add(device, &ioat2_ktype);
+
+ if (dca)
+ device->dca = ioat2_dca_init(pdev, device->reg_base);
+
+ return err;
+}
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef IOATDMA_V2_H
+#define IOATDMA_V2_H
+
+#include <linux/dmaengine.h>
+#include "dma.h"
+#include "hw.h"
+
+
+extern int ioat_pending_level;
+extern int ioat_ring_alloc_order;
+
+/*
+ * workaround for IOAT ver.3.0 null descriptor issue
+ * (channel returns error when size is 0)
+ */
+#define NULL_DESC_BUFFER_SIZE 1
+
+#define IOAT_MAX_ORDER 16
+#define ioat_get_alloc_order() \
+ (min(ioat_ring_alloc_order, IOAT_MAX_ORDER))
+#define ioat_get_max_alloc_order() \
+ (min(ioat_ring_max_alloc_order, IOAT_MAX_ORDER))
+
+/* struct ioat2_dma_chan - ioat v2 / v3 channel attributes
+ * @base: common ioat channel parameters
+ * @xfercap_log; log2 of channel max transfer length (for fast division)
+ * @head: allocated index
+ * @issued: hardware notification point
+ * @tail: cleanup index
+ * @pending: lock free indicator for issued != head
+ * @dmacount: identical to 'head' except for occasionally resetting to zero
+ * @alloc_order: log2 of the number of allocated descriptors
+ * @ring: software ring buffer implementation of hardware ring
+ * @ring_lock: protects ring attributes
+ */
+struct ioat2_dma_chan {
+ struct ioat_chan_common base;
+ size_t xfercap_log;
+ u16 head;
+ u16 issued;
+ u16 tail;
+ u16 dmacount;
+ u16 alloc_order;
+ int pending;
+ struct ioat_ring_ent **ring;
+ spinlock_t ring_lock;
+};
+
+static inline struct ioat2_dma_chan *to_ioat2_chan(struct dma_chan *c)
+{
+ struct ioat_chan_common *chan = to_chan_common(c);
+
+ return container_of(chan, struct ioat2_dma_chan, base);
+}
+
+static inline u16 ioat2_ring_mask(struct ioat2_dma_chan *ioat)
+{
+ return (1 << ioat->alloc_order) - 1;
+}
+
+/* count of descriptors in flight with the engine */
+static inline u16 ioat2_ring_active(struct ioat2_dma_chan *ioat)
+{
+ return (ioat->head - ioat->tail) & ioat2_ring_mask(ioat);
+}
+
+/* count of descriptors pending submission to hardware */
+static inline u16 ioat2_ring_pending(struct ioat2_dma_chan *ioat)
+{
+ return (ioat->head - ioat->issued) & ioat2_ring_mask(ioat);
+}
+
+static inline u16 ioat2_ring_space(struct ioat2_dma_chan *ioat)
+{
+ u16 num_descs = ioat2_ring_mask(ioat) + 1;
+ u16 active = ioat2_ring_active(ioat);
+
+ BUG_ON(active > num_descs);
+
+ return num_descs - active;
+}
+
+/* assumes caller already checked space */
+static inline u16 ioat2_desc_alloc(struct ioat2_dma_chan *ioat, u16 len)
+{
+ ioat->head += len;
+ return ioat->head - len;
+}
+
+static inline u16 ioat2_xferlen_to_descs(struct ioat2_dma_chan *ioat, size_t len)
+{
+ u16 num_descs = len >> ioat->xfercap_log;
+
+ num_descs += !!(len & ((1 << ioat->xfercap_log) - 1));
+ return num_descs;
+}
+
+/**
+ * struct ioat_ring_ent - wrapper around hardware descriptor
+ * @hw: hardware DMA descriptor (for memcpy)
+ * @fill: hardware fill descriptor
+ * @xor: hardware xor descriptor
+ * @xor_ex: hardware xor extension descriptor
+ * @pq: hardware pq descriptor
+ * @pq_ex: hardware pq extension descriptor
+ * @pqu: hardware pq update descriptor
+ * @raw: hardware raw (un-typed) descriptor
+ * @txd: the generic software descriptor for all engines
+ * @len: total transaction length for unmap
+ * @result: asynchronous result of validate operations
+ * @id: identifier for debug
+ */
+
+struct ioat_ring_ent {
+ union {
+ struct ioat_dma_descriptor *hw;
+ struct ioat_fill_descriptor *fill;
+ struct ioat_xor_descriptor *xor;
+ struct ioat_xor_ext_descriptor *xor_ex;
+ struct ioat_pq_descriptor *pq;
+ struct ioat_pq_ext_descriptor *pq_ex;
+ struct ioat_pq_update_descriptor *pqu;
+ struct ioat_raw_descriptor *raw;
+ };
+ size_t len;
+ struct dma_async_tx_descriptor txd;
+ enum sum_check_flags *result;
+ #ifdef DEBUG
+ int id;
+ #endif
+};
+
+static inline struct ioat_ring_ent *
+ioat2_get_ring_ent(struct ioat2_dma_chan *ioat, u16 idx)
+{
+ return ioat->ring[idx & ioat2_ring_mask(ioat)];
+}
+
+static inline void ioat2_set_chainaddr(struct ioat2_dma_chan *ioat, u64 addr)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ writel(addr & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
+ writel(addr >> 32,
+ chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
+}
+
+int __devinit ioat2_dma_probe(struct ioatdma_device *dev, int dca);
+int __devinit ioat3_dma_probe(struct ioatdma_device *dev, int dca);
+struct dca_provider * __devinit ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase);
+struct dca_provider * __devinit ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase);
+int ioat2_alloc_and_lock(u16 *idx, struct ioat2_dma_chan *ioat, int num_descs);
+int ioat2_enumerate_channels(struct ioatdma_device *device);
+struct dma_async_tx_descriptor *
+ioat2_dma_prep_memcpy_lock(struct dma_chan *c, dma_addr_t dma_dest,
+ dma_addr_t dma_src, size_t len, unsigned long flags);
+void ioat2_issue_pending(struct dma_chan *chan);
+int ioat2_alloc_chan_resources(struct dma_chan *c);
+void ioat2_free_chan_resources(struct dma_chan *c);
+enum dma_status ioat2_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used);
+void __ioat2_restart_chan(struct ioat2_dma_chan *ioat);
+bool reshape_ring(struct ioat2_dma_chan *ioat, int order);
+void __ioat2_issue_pending(struct ioat2_dma_chan *ioat);
+void ioat2_cleanup_tasklet(unsigned long data);
+void ioat2_timer_event(unsigned long data);
+extern struct kobj_type ioat2_ktype;
+extern struct kmem_cache *ioat2_cache;
+#endif /* IOATDMA_V2_H */
--- /dev/null
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2004-2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Support routines for v3+ hardware
+ */
+
+#include <linux/pci.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include "registers.h"
+#include "hw.h"
+#include "dma.h"
+#include "dma_v2.h"
+
+/* ioat hardware assumes at least two sources for raid operations */
+#define src_cnt_to_sw(x) ((x) + 2)
+#define src_cnt_to_hw(x) ((x) - 2)
+
+/* provide a lookup table for setting the source address in the base or
+ * extended descriptor of an xor or pq descriptor
+ */
+static const u8 xor_idx_to_desc __read_mostly = 0xd0;
+static const u8 xor_idx_to_field[] __read_mostly = { 1, 4, 5, 6, 7, 0, 1, 2 };
+static const u8 pq_idx_to_desc __read_mostly = 0xf8;
+static const u8 pq_idx_to_field[] __read_mostly = { 1, 4, 5, 0, 1, 2, 4, 5 };
+
+static dma_addr_t xor_get_src(struct ioat_raw_descriptor *descs[2], int idx)
+{
+ struct ioat_raw_descriptor *raw = descs[xor_idx_to_desc >> idx & 1];
+
+ return raw->field[xor_idx_to_field[idx]];
+}
+
+static void xor_set_src(struct ioat_raw_descriptor *descs[2],
+ dma_addr_t addr, u32 offset, int idx)
+{
+ struct ioat_raw_descriptor *raw = descs[xor_idx_to_desc >> idx & 1];
+
+ raw->field[xor_idx_to_field[idx]] = addr + offset;
+}
+
+static dma_addr_t pq_get_src(struct ioat_raw_descriptor *descs[2], int idx)
+{
+ struct ioat_raw_descriptor *raw = descs[pq_idx_to_desc >> idx & 1];
+
+ return raw->field[pq_idx_to_field[idx]];
+}
+
+static void pq_set_src(struct ioat_raw_descriptor *descs[2],
+ dma_addr_t addr, u32 offset, u8 coef, int idx)
+{
+ struct ioat_pq_descriptor *pq = (struct ioat_pq_descriptor *) descs[0];
+ struct ioat_raw_descriptor *raw = descs[pq_idx_to_desc >> idx & 1];
+
+ raw->field[pq_idx_to_field[idx]] = addr + offset;
+ pq->coef[idx] = coef;
+}
+
+static void ioat3_dma_unmap(struct ioat2_dma_chan *ioat,
+ struct ioat_ring_ent *desc, int idx)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct pci_dev *pdev = chan->device->pdev;
+ size_t len = desc->len;
+ size_t offset = len - desc->hw->size;
+ struct dma_async_tx_descriptor *tx = &desc->txd;
+ enum dma_ctrl_flags flags = tx->flags;
+
+ switch (desc->hw->ctl_f.op) {
+ case IOAT_OP_COPY:
+ if (!desc->hw->ctl_f.null) /* skip 'interrupt' ops */
+ ioat_dma_unmap(chan, flags, len, desc->hw);
+ break;
+ case IOAT_OP_FILL: {
+ struct ioat_fill_descriptor *hw = desc->fill;
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP))
+ ioat_unmap(pdev, hw->dst_addr - offset, len,
+ PCI_DMA_FROMDEVICE, flags, 1);
+ break;
+ }
+ case IOAT_OP_XOR_VAL:
+ case IOAT_OP_XOR: {
+ struct ioat_xor_descriptor *xor = desc->xor;
+ struct ioat_ring_ent *ext;
+ struct ioat_xor_ext_descriptor *xor_ex = NULL;
+ int src_cnt = src_cnt_to_sw(xor->ctl_f.src_cnt);
+ struct ioat_raw_descriptor *descs[2];
+ int i;
+
+ if (src_cnt > 5) {
+ ext = ioat2_get_ring_ent(ioat, idx + 1);
+ xor_ex = ext->xor_ex;
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ descs[0] = (struct ioat_raw_descriptor *) xor;
+ descs[1] = (struct ioat_raw_descriptor *) xor_ex;
+ for (i = 0; i < src_cnt; i++) {
+ dma_addr_t src = xor_get_src(descs, i);
+
+ ioat_unmap(pdev, src - offset, len,
+ PCI_DMA_TODEVICE, flags, 0);
+ }
+
+ /* dest is a source in xor validate operations */
+ if (xor->ctl_f.op == IOAT_OP_XOR_VAL) {
+ ioat_unmap(pdev, xor->dst_addr - offset, len,
+ PCI_DMA_TODEVICE, flags, 1);
+ break;
+ }
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP))
+ ioat_unmap(pdev, xor->dst_addr - offset, len,
+ PCI_DMA_FROMDEVICE, flags, 1);
+ break;
+ }
+ case IOAT_OP_PQ_VAL:
+ case IOAT_OP_PQ: {
+ struct ioat_pq_descriptor *pq = desc->pq;
+ struct ioat_ring_ent *ext;
+ struct ioat_pq_ext_descriptor *pq_ex = NULL;
+ int src_cnt = src_cnt_to_sw(pq->ctl_f.src_cnt);
+ struct ioat_raw_descriptor *descs[2];
+ int i;
+
+ if (src_cnt > 3) {
+ ext = ioat2_get_ring_ent(ioat, idx + 1);
+ pq_ex = ext->pq_ex;
+ }
+
+ /* in the 'continue' case don't unmap the dests as sources */
+ if (dmaf_p_disabled_continue(flags))
+ src_cnt--;
+ else if (dmaf_continue(flags))
+ src_cnt -= 3;
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ descs[0] = (struct ioat_raw_descriptor *) pq;
+ descs[1] = (struct ioat_raw_descriptor *) pq_ex;
+ for (i = 0; i < src_cnt; i++) {
+ dma_addr_t src = pq_get_src(descs, i);
+
+ ioat_unmap(pdev, src - offset, len,
+ PCI_DMA_TODEVICE, flags, 0);
+ }
+
+ /* the dests are sources in pq validate operations */
+ if (pq->ctl_f.op == IOAT_OP_XOR_VAL) {
+ if (!(flags & DMA_PREP_PQ_DISABLE_P))
+ ioat_unmap(pdev, pq->p_addr - offset,
+ len, PCI_DMA_TODEVICE, flags, 0);
+ if (!(flags & DMA_PREP_PQ_DISABLE_Q))
+ ioat_unmap(pdev, pq->q_addr - offset,
+ len, PCI_DMA_TODEVICE, flags, 0);
+ break;
+ }
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (!(flags & DMA_PREP_PQ_DISABLE_P))
+ ioat_unmap(pdev, pq->p_addr - offset, len,
+ PCI_DMA_BIDIRECTIONAL, flags, 1);
+ if (!(flags & DMA_PREP_PQ_DISABLE_Q))
+ ioat_unmap(pdev, pq->q_addr - offset, len,
+ PCI_DMA_BIDIRECTIONAL, flags, 1);
+ }
+ break;
+ }
+ default:
+ dev_err(&pdev->dev, "%s: unknown op type: %#x\n",
+ __func__, desc->hw->ctl_f.op);
+ }
+}
+
+static bool desc_has_ext(struct ioat_ring_ent *desc)
+{
+ struct ioat_dma_descriptor *hw = desc->hw;
+
+ if (hw->ctl_f.op == IOAT_OP_XOR ||
+ hw->ctl_f.op == IOAT_OP_XOR_VAL) {
+ struct ioat_xor_descriptor *xor = desc->xor;
+
+ if (src_cnt_to_sw(xor->ctl_f.src_cnt) > 5)
+ return true;
+ } else if (hw->ctl_f.op == IOAT_OP_PQ ||
+ hw->ctl_f.op == IOAT_OP_PQ_VAL) {
+ struct ioat_pq_descriptor *pq = desc->pq;
+
+ if (src_cnt_to_sw(pq->ctl_f.src_cnt) > 3)
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * __cleanup - reclaim used descriptors
+ * @ioat: channel (ring) to clean
+ *
+ * The difference from the dma_v2.c __cleanup() is that this routine
+ * handles extended descriptors and dma-unmapping raid operations.
+ */
+static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_ring_ent *desc;
+ bool seen_current = false;
+ u16 active;
+ int i;
+
+ dev_dbg(to_dev(chan), "%s: head: %#x tail: %#x issued: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued);
+
+ active = ioat2_ring_active(ioat);
+ for (i = 0; i < active && !seen_current; i++) {
+ struct dma_async_tx_descriptor *tx;
+
+ prefetch(ioat2_get_ring_ent(ioat, ioat->tail + i + 1));
+ desc = ioat2_get_ring_ent(ioat, ioat->tail + i);
+ dump_desc_dbg(ioat, desc);
+ tx = &desc->txd;
+ if (tx->cookie) {
+ chan->completed_cookie = tx->cookie;
+ ioat3_dma_unmap(ioat, desc, ioat->tail + i);
+ tx->cookie = 0;
+ if (tx->callback) {
+ tx->callback(tx->callback_param);
+ tx->callback = NULL;
+ }
+ }
+
+ if (tx->phys == phys_complete)
+ seen_current = true;
+
+ /* skip extended descriptors */
+ if (desc_has_ext(desc)) {
+ BUG_ON(i + 1 >= active);
+ i++;
+ }
+ }
+ ioat->tail += i;
+ BUG_ON(!seen_current); /* no active descs have written a completion? */
+ chan->last_completion = phys_complete;
+ if (ioat->head == ioat->tail) {
+ dev_dbg(to_dev(chan), "%s: cancel completion timeout\n",
+ __func__);
+ clear_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+}
+
+static void ioat3_cleanup(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+
+ prefetch(chan->completion);
+
+ if (!spin_trylock_bh(&chan->cleanup_lock))
+ return;
+
+ if (!ioat_cleanup_preamble(chan, &phys_complete)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ if (!spin_trylock_bh(&ioat->ring_lock)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ __cleanup(ioat, phys_complete);
+
+ spin_unlock_bh(&ioat->ring_lock);
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static void ioat3_cleanup_tasklet(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+
+ ioat3_cleanup(ioat);
+ writew(IOAT_CHANCTRL_RUN | IOAT3_CHANCTRL_COMPL_DCA_EN,
+ ioat->base.reg_base + IOAT_CHANCTRL_OFFSET);
+}
+
+static void ioat3_restart_channel(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+ u32 status;
+
+ status = ioat_chansts(chan);
+ if (is_ioat_active(status) || is_ioat_idle(status))
+ ioat_suspend(chan);
+ while (is_ioat_active(status) || is_ioat_idle(status)) {
+ status = ioat_chansts(chan);
+ cpu_relax();
+ }
+
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+
+ __ioat2_restart_chan(ioat);
+}
+
+static void ioat3_timer_event(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+ struct ioat_chan_common *chan = &ioat->base;
+
+ spin_lock_bh(&chan->cleanup_lock);
+ if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
+ unsigned long phys_complete;
+ u64 status;
+
+ spin_lock_bh(&ioat->ring_lock);
+ status = ioat_chansts(chan);
+
+ /* when halted due to errors check for channel
+ * programming errors before advancing the completion state
+ */
+ if (is_ioat_halted(status)) {
+ u32 chanerr;
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ BUG_ON(is_ioat_bug(chanerr));
+ }
+
+ /* if we haven't made progress and we have already
+ * acknowledged a pending completion once, then be more
+ * forceful with a restart
+ */
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+ else if (test_bit(IOAT_COMPLETION_ACK, &chan->state))
+ ioat3_restart_channel(ioat);
+ else {
+ set_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ }
+ spin_unlock_bh(&ioat->ring_lock);
+ } else {
+ u16 active;
+
+ /* if the ring is idle, empty, and oversized try to step
+ * down the size
+ */
+ spin_lock_bh(&ioat->ring_lock);
+ active = ioat2_ring_active(ioat);
+ if (active == 0 && ioat->alloc_order > ioat_get_alloc_order())
+ reshape_ring(ioat, ioat->alloc_order-1);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ /* keep shrinking until we get back to our minimum
+ * default size
+ */
+ if (ioat->alloc_order > ioat_get_alloc_order())
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static enum dma_status
+ioat3_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+
+ if (ioat_is_complete(c, cookie, done, used) == DMA_SUCCESS)
+ return DMA_SUCCESS;
+
+ ioat3_cleanup(ioat);
+
+ return ioat_is_complete(c, cookie, done, used);
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_memset_lock(struct dma_chan *c, dma_addr_t dest, int value,
+ size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_ring_ent *desc;
+ size_t total_len = len;
+ struct ioat_fill_descriptor *fill;
+ int num_descs;
+ u64 src_data = (0x0101010101010101ULL) * (value & 0xff);
+ u16 idx;
+ int i;
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ size_t xfer_size = min_t(size_t, len, 1 << ioat->xfercap_log);
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ fill = desc->fill;
+
+ fill->size = xfer_size;
+ fill->src_data = src_data;
+ fill->dst_addr = dest;
+ fill->ctl = 0;
+ fill->ctl_f.op = IOAT_OP_FILL;
+
+ len -= xfer_size;
+ dest += xfer_size;
+ dump_desc_dbg(ioat, desc);
+ } while (++i < num_descs);
+
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ fill->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ fill->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ fill->ctl_f.compl_write = 1;
+ dump_desc_dbg(ioat, desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+__ioat3_prep_xor_lock(struct dma_chan *c, enum sum_check_flags *result,
+ dma_addr_t dest, dma_addr_t *src, unsigned int src_cnt,
+ size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_ring_ent *compl_desc;
+ struct ioat_ring_ent *desc;
+ struct ioat_ring_ent *ext;
+ size_t total_len = len;
+ struct ioat_xor_descriptor *xor;
+ struct ioat_xor_ext_descriptor *xor_ex = NULL;
+ struct ioat_dma_descriptor *hw;
+ u32 offset = 0;
+ int num_descs;
+ int with_ext;
+ int i;
+ u16 idx;
+ u8 op = result ? IOAT_OP_XOR_VAL : IOAT_OP_XOR;
+
+ BUG_ON(src_cnt < 2);
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ /* we need 2x the number of descriptors to cover greater than 5
+ * sources
+ */
+ if (src_cnt > 5) {
+ with_ext = 1;
+ num_descs *= 2;
+ } else
+ with_ext = 0;
+
+ /* completion writes from the raid engine may pass completion
+ * writes from the legacy engine, so we need one extra null
+ * (legacy) descriptor to ensure all completion writes arrive in
+ * order.
+ */
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs+1) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ struct ioat_raw_descriptor *descs[2];
+ size_t xfer_size = min_t(size_t, len, 1 << ioat->xfercap_log);
+ int s;
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ xor = desc->xor;
+
+ /* save a branch by unconditionally retrieving the
+ * extended descriptor xor_set_src() knows to not write
+ * to it in the single descriptor case
+ */
+ ext = ioat2_get_ring_ent(ioat, idx + i + 1);
+ xor_ex = ext->xor_ex;
+
+ descs[0] = (struct ioat_raw_descriptor *) xor;
+ descs[1] = (struct ioat_raw_descriptor *) xor_ex;
+ for (s = 0; s < src_cnt; s++)
+ xor_set_src(descs, src[s], offset, s);
+ xor->size = xfer_size;
+ xor->dst_addr = dest + offset;
+ xor->ctl = 0;
+ xor->ctl_f.op = op;
+ xor->ctl_f.src_cnt = src_cnt_to_hw(src_cnt);
+
+ len -= xfer_size;
+ offset += xfer_size;
+ dump_desc_dbg(ioat, desc);
+ } while ((i += 1 + with_ext) < num_descs);
+
+ /* last xor descriptor carries the unmap parameters and fence bit */
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ if (result)
+ desc->result = result;
+ xor->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+
+ /* completion descriptor carries interrupt bit */
+ compl_desc = ioat2_get_ring_ent(ioat, idx + i);
+ compl_desc->txd.flags = flags & DMA_PREP_INTERRUPT;
+ hw = compl_desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.compl_write = 1;
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ dump_desc_dbg(ioat, compl_desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
+ unsigned int src_cnt, size_t len, unsigned long flags)
+{
+ return __ioat3_prep_xor_lock(chan, NULL, dest, src, src_cnt, len, flags);
+}
+
+struct dma_async_tx_descriptor *
+ioat3_prep_xor_val(struct dma_chan *chan, dma_addr_t *src,
+ unsigned int src_cnt, size_t len,
+ enum sum_check_flags *result, unsigned long flags)
+{
+ /* the cleanup routine only sets bits on validate failure, it
+ * does not clear bits on validate success... so clear it here
+ */
+ *result = 0;
+
+ return __ioat3_prep_xor_lock(chan, result, src[0], &src[1],
+ src_cnt - 1, len, flags);
+}
+
+static void
+dump_pq_desc_dbg(struct ioat2_dma_chan *ioat, struct ioat_ring_ent *desc, struct ioat_ring_ent *ext)
+{
+ struct device *dev = to_dev(&ioat->base);
+ struct ioat_pq_descriptor *pq = desc->pq;
+ struct ioat_pq_ext_descriptor *pq_ex = ext ? ext->pq_ex : NULL;
+ struct ioat_raw_descriptor *descs[] = { (void *) pq, (void *) pq_ex };
+ int src_cnt = src_cnt_to_sw(pq->ctl_f.src_cnt);
+ int i;
+
+ dev_dbg(dev, "desc[%d]: (%#llx->%#llx) flags: %#x"
+ " sz: %#x ctl: %#x (op: %d int: %d compl: %d pq: '%s%s' src_cnt: %d)\n",
+ desc_id(desc), (unsigned long long) desc->txd.phys,
+ (unsigned long long) (pq_ex ? pq_ex->next : pq->next),
+ desc->txd.flags, pq->size, pq->ctl, pq->ctl_f.op, pq->ctl_f.int_en,
+ pq->ctl_f.compl_write,
+ pq->ctl_f.p_disable ? "" : "p", pq->ctl_f.q_disable ? "" : "q",
+ pq->ctl_f.src_cnt);
+ for (i = 0; i < src_cnt; i++)
+ dev_dbg(dev, "\tsrc[%d]: %#llx coef: %#x\n", i,
+ (unsigned long long) pq_get_src(descs, i), pq->coef[i]);
+ dev_dbg(dev, "\tP: %#llx\n", pq->p_addr);
+ dev_dbg(dev, "\tQ: %#llx\n", pq->q_addr);
+}
+
+static struct dma_async_tx_descriptor *
+__ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result,
+ const dma_addr_t *dst, const dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf,
+ size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_ring_ent *compl_desc;
+ struct ioat_ring_ent *desc;
+ struct ioat_ring_ent *ext;
+ size_t total_len = len;
+ struct ioat_pq_descriptor *pq;
+ struct ioat_pq_ext_descriptor *pq_ex = NULL;
+ struct ioat_dma_descriptor *hw;
+ u32 offset = 0;
+ int num_descs;
+ int with_ext;
+ int i, s;
+ u16 idx;
+ u8 op = result ? IOAT_OP_PQ_VAL : IOAT_OP_PQ;
+
+ dev_dbg(to_dev(chan), "%s\n", __func__);
+ /* the engine requires at least two sources (we provide
+ * at least 1 implied source in the DMA_PREP_CONTINUE case)
+ */
+ BUG_ON(src_cnt + dmaf_continue(flags) < 2);
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ /* we need 2x the number of descriptors to cover greater than 3
+ * sources
+ */
+ if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) {
+ with_ext = 1;
+ num_descs *= 2;
+ } else
+ with_ext = 0;
+
+ /* completion writes from the raid engine may pass completion
+ * writes from the legacy engine, so we need one extra null
+ * (legacy) descriptor to ensure all completion writes arrive in
+ * order.
+ */
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs+1) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ struct ioat_raw_descriptor *descs[2];
+ size_t xfer_size = min_t(size_t, len, 1 << ioat->xfercap_log);
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ pq = desc->pq;
+
+ /* save a branch by unconditionally retrieving the
+ * extended descriptor pq_set_src() knows to not write
+ * to it in the single descriptor case
+ */
+ ext = ioat2_get_ring_ent(ioat, idx + i + with_ext);
+ pq_ex = ext->pq_ex;
+
+ descs[0] = (struct ioat_raw_descriptor *) pq;
+ descs[1] = (struct ioat_raw_descriptor *) pq_ex;
+
+ for (s = 0; s < src_cnt; s++)
+ pq_set_src(descs, src[s], offset, scf[s], s);
+
+ /* see the comment for dma_maxpq in include/linux/dmaengine.h */
+ if (dmaf_p_disabled_continue(flags))
+ pq_set_src(descs, dst[1], offset, 1, s++);
+ else if (dmaf_continue(flags)) {
+ pq_set_src(descs, dst[0], offset, 0, s++);
+ pq_set_src(descs, dst[1], offset, 1, s++);
+ pq_set_src(descs, dst[1], offset, 0, s++);
+ }
+ pq->size = xfer_size;
+ pq->p_addr = dst[0] + offset;
+ pq->q_addr = dst[1] + offset;
+ pq->ctl = 0;
+ pq->ctl_f.op = op;
+ pq->ctl_f.src_cnt = src_cnt_to_hw(s);
+ pq->ctl_f.p_disable = !!(flags & DMA_PREP_PQ_DISABLE_P);
+ pq->ctl_f.q_disable = !!(flags & DMA_PREP_PQ_DISABLE_Q);
+
+ len -= xfer_size;
+ offset += xfer_size;
+ } while ((i += 1 + with_ext) < num_descs);
+
+ /* last pq descriptor carries the unmap parameters and fence bit */
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ if (result)
+ desc->result = result;
+ pq->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ dump_pq_desc_dbg(ioat, desc, ext);
+
+ /* completion descriptor carries interrupt bit */
+ compl_desc = ioat2_get_ring_ent(ioat, idx + i);
+ compl_desc->txd.flags = flags & DMA_PREP_INTERRUPT;
+ hw = compl_desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.compl_write = 1;
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ dump_desc_dbg(ioat, compl_desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ unsigned long flags)
+{
+ /* handle the single source multiply case from the raid6
+ * recovery path
+ */
+ if (unlikely((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1)) {
+ dma_addr_t single_source[2];
+ unsigned char single_source_coef[2];
+
+ BUG_ON(flags & DMA_PREP_PQ_DISABLE_Q);
+ single_source[0] = src[0];
+ single_source[1] = src[0];
+ single_source_coef[0] = scf[0];
+ single_source_coef[1] = 0;
+
+ return __ioat3_prep_pq_lock(chan, NULL, dst, single_source, 2,
+ single_source_coef, len, flags);
+ } else
+ return __ioat3_prep_pq_lock(chan, NULL, dst, src, src_cnt, scf,
+ len, flags);
+}
+
+struct dma_async_tx_descriptor *
+ioat3_prep_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ enum sum_check_flags *pqres, unsigned long flags)
+{
+ /* the cleanup routine only sets bits on validate failure, it
+ * does not clear bits on validate success... so clear it here
+ */
+ *pqres = 0;
+
+ return __ioat3_prep_pq_lock(chan, pqres, pq, src, src_cnt, scf, len,
+ flags);
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_pqxor(struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
+ unsigned int src_cnt, size_t len, unsigned long flags)
+{
+ unsigned char scf[src_cnt];
+ dma_addr_t pq[2];
+
+ memset(scf, 0, src_cnt);
+ flags |= DMA_PREP_PQ_DISABLE_Q;
+ pq[0] = dst;
+ pq[1] = ~0;
+
+ return __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len,
+ flags);
+}
+
+struct dma_async_tx_descriptor *
+ioat3_prep_pqxor_val(struct dma_chan *chan, dma_addr_t *src,
+ unsigned int src_cnt, size_t len,
+ enum sum_check_flags *result, unsigned long flags)
+{
+ unsigned char scf[src_cnt];
+ dma_addr_t pq[2];
+
+ /* the cleanup routine only sets bits on validate failure, it
+ * does not clear bits on validate success... so clear it here
+ */
+ *result = 0;
+
+ memset(scf, 0, src_cnt);
+ flags |= DMA_PREP_PQ_DISABLE_Q;
+ pq[0] = src[0];
+ pq[1] = ~0;
+
+ return __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, scf,
+ len, flags);
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_interrupt_lock(struct dma_chan *c, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_ring_ent *desc;
+ struct ioat_dma_descriptor *hw;
+ u16 idx;
+
+ if (ioat2_alloc_and_lock(&idx, ioat, 1) == 0)
+ desc = ioat2_get_ring_ent(ioat, idx);
+ else
+ return NULL;
+
+ hw = desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = 1;
+ hw->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ hw->ctl_f.compl_write = 1;
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ hw->src_addr = 0;
+ hw->dst_addr = 0;
+
+ desc->txd.flags = flags;
+ desc->len = 1;
+
+ dump_desc_dbg(ioat, desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static void __devinit ioat3_dma_test_callback(void *dma_async_param)
+{
+ struct completion *cmp = dma_async_param;
+
+ complete(cmp);
+}
+
+#define IOAT_NUM_SRC_TEST 6 /* must be <= 8 */
+static int __devinit ioat_xor_val_self_test(struct ioatdma_device *device)
+{
+ int i, src_idx;
+ struct page *dest;
+ struct page *xor_srcs[IOAT_NUM_SRC_TEST];
+ struct page *xor_val_srcs[IOAT_NUM_SRC_TEST + 1];
+ dma_addr_t dma_srcs[IOAT_NUM_SRC_TEST + 1];
+ dma_addr_t dma_addr, dest_dma;
+ struct dma_async_tx_descriptor *tx;
+ struct dma_chan *dma_chan;
+ dma_cookie_t cookie;
+ u8 cmp_byte = 0;
+ u32 cmp_word;
+ u32 xor_val_result;
+ int err = 0;
+ struct completion cmp;
+ unsigned long tmo;
+ struct device *dev = &device->pdev->dev;
+ struct dma_device *dma = &device->common;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ if (!dma_has_cap(DMA_XOR, dma->cap_mask))
+ return 0;
+
+ for (src_idx = 0; src_idx < IOAT_NUM_SRC_TEST; src_idx++) {
+ xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
+ __free_page(xor_srcs[src_idx]);
+ return -ENOMEM;
+ }
+ }
+
+ dest = alloc_page(GFP_KERNEL);
+ if (!dest) {
+ while (src_idx--)
+ __free_page(xor_srcs[src_idx]);
+ return -ENOMEM;
+ }
+
+ /* Fill in src buffers */
+ for (src_idx = 0; src_idx < IOAT_NUM_SRC_TEST; src_idx++) {
+ u8 *ptr = page_address(xor_srcs[src_idx]);
+ for (i = 0; i < PAGE_SIZE; i++)
+ ptr[i] = (1 << src_idx);
+ }
+
+ for (src_idx = 0; src_idx < IOAT_NUM_SRC_TEST; src_idx++)
+ cmp_byte ^= (u8) (1 << src_idx);
+
+ cmp_word = (cmp_byte << 24) | (cmp_byte << 16) |
+ (cmp_byte << 8) | cmp_byte;
+
+ memset(page_address(dest), 0, PAGE_SIZE);
+
+ dma_chan = container_of(dma->channels.next, struct dma_chan,
+ device_node);
+ if (dma->device_alloc_chan_resources(dma_chan) < 1) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* test xor */
+ dest_dma = dma_map_page(dev, dest, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
+ dma_srcs[i] = dma_map_page(dev, xor_srcs[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_xor(dma_chan, dest_dma, dma_srcs,
+ IOAT_NUM_SRC_TEST, PAGE_SIZE,
+ DMA_PREP_INTERRUPT);
+
+ if (!tx) {
+ dev_err(dev, "Self-test xor prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test xor setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test xor timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ dma_sync_single_for_cpu(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
+ for (i = 0; i < (PAGE_SIZE / sizeof(u32)); i++) {
+ u32 *ptr = page_address(dest);
+ if (ptr[i] != cmp_word) {
+ dev_err(dev, "Self-test xor failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ }
+ dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_TO_DEVICE);
+
+ /* skip validate if the capability is not present */
+ if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask))
+ goto free_resources;
+
+ /* validate the sources with the destintation page */
+ for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
+ xor_val_srcs[i] = xor_srcs[i];
+ xor_val_srcs[i] = dest;
+
+ xor_val_result = 1;
+
+ for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++)
+ dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOAT_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &xor_val_result, DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(dev, "Self-test zero prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test zero setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test validate timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (xor_val_result != 0) {
+ dev_err(dev, "Self-test validate failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ /* skip memset if the capability is not present */
+ if (!dma_has_cap(DMA_MEMSET, dma_chan->device->cap_mask))
+ goto free_resources;
+
+ /* test memset */
+ dma_addr = dma_map_page(dev, dest, 0,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ tx = dma->device_prep_dma_memset(dma_chan, dma_addr, 0, PAGE_SIZE,
+ DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(dev, "Self-test memset prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test memset setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test memset timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ for (i = 0; i < PAGE_SIZE/sizeof(u32); i++) {
+ u32 *ptr = page_address(dest);
+ if (ptr[i]) {
+ dev_err(dev, "Self-test memset failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ }
+
+ /* test for non-zero parity sum */
+ xor_val_result = 0;
+ for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++)
+ dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOAT_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &xor_val_result, DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(dev, "Self-test 2nd zero prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test 2nd zero setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test 2nd validate timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (xor_val_result != SUM_CHECK_P_RESULT) {
+ dev_err(dev, "Self-test validate failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+free_resources:
+ dma->device_free_chan_resources(dma_chan);
+out:
+ src_idx = IOAT_NUM_SRC_TEST;
+ while (src_idx--)
+ __free_page(xor_srcs[src_idx]);
+ __free_page(dest);
+ return err;
+}
+
+static int __devinit ioat3_dma_self_test(struct ioatdma_device *device)
+{
+ int rc = ioat_dma_self_test(device);
+
+ if (rc)
+ return rc;
+
+ rc = ioat_xor_val_self_test(device);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
+{
+ struct pci_dev *pdev = device->pdev;
+ struct dma_device *dma;
+ struct dma_chan *c;
+ struct ioat_chan_common *chan;
+ bool is_raid_device = false;
+ int err;
+ u16 dev_id;
+ u32 cap;
+
+ device->enumerate_channels = ioat2_enumerate_channels;
+ device->self_test = ioat3_dma_self_test;
+ dma = &device->common;
+ dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock;
+ dma->device_issue_pending = ioat2_issue_pending;
+ dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
+ dma->device_free_chan_resources = ioat2_free_chan_resources;
+
+ dma_cap_set(DMA_INTERRUPT, dma->cap_mask);
+ dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock;
+
+ cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET);
+ if (cap & IOAT_CAP_XOR) {
+ is_raid_device = true;
+ dma->max_xor = 8;
+ dma->xor_align = 2;
+
+ dma_cap_set(DMA_XOR, dma->cap_mask);
+ dma->device_prep_dma_xor = ioat3_prep_xor;
+
+ dma_cap_set(DMA_XOR_VAL, dma->cap_mask);
+ dma->device_prep_dma_xor_val = ioat3_prep_xor_val;
+ }
+ if (cap & IOAT_CAP_PQ) {
+ is_raid_device = true;
+ dma_set_maxpq(dma, 8, 0);
+ dma->pq_align = 2;
+
+ dma_cap_set(DMA_PQ, dma->cap_mask);
+ dma->device_prep_dma_pq = ioat3_prep_pq;
+
+ dma_cap_set(DMA_PQ_VAL, dma->cap_mask);
+ dma->device_prep_dma_pq_val = ioat3_prep_pq_val;
+
+ if (!(cap & IOAT_CAP_XOR)) {
+ dma->max_xor = 8;
+ dma->xor_align = 2;
+
+ dma_cap_set(DMA_XOR, dma->cap_mask);
+ dma->device_prep_dma_xor = ioat3_prep_pqxor;
+
+ dma_cap_set(DMA_XOR_VAL, dma->cap_mask);
+ dma->device_prep_dma_xor_val = ioat3_prep_pqxor_val;
+ }
+ }
+ if (is_raid_device && (cap & IOAT_CAP_FILL_BLOCK)) {
+ dma_cap_set(DMA_MEMSET, dma->cap_mask);
+ dma->device_prep_dma_memset = ioat3_prep_memset_lock;
+ }
+
+
+ if (is_raid_device) {
+ dma->device_is_tx_complete = ioat3_is_complete;
+ device->cleanup_tasklet = ioat3_cleanup_tasklet;
+ device->timer_fn = ioat3_timer_event;
+ } else {
+ dma->device_is_tx_complete = ioat2_is_complete;
+ device->cleanup_tasklet = ioat2_cleanup_tasklet;
+ device->timer_fn = ioat2_timer_event;
+ }
+
+ /* -= IOAT ver.3 workarounds =- */
+ /* Write CHANERRMSK_INT with 3E07h to mask out the errors
+ * that can cause stability issues for IOAT ver.3
+ */
+ pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07);
+
+ /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
+ * (workaround for spurious config parity error after restart)
+ */
+ pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id);
+ if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0)
+ pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10);
+
+ err = ioat_probe(device);
+ if (err)
+ return err;
+ ioat_set_tcp_copy_break(262144);
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ chan = to_chan_common(c);
+ writel(IOAT_DMA_DCA_ANY_CPU,
+ chan->reg_base + IOAT_DCACTRL_OFFSET);
+ }
+
+ err = ioat_register(device);
+ if (err)
+ return err;
+
+ ioat_kobject_add(device, &ioat2_ktype);
+
+ if (dca)
+ device->dca = ioat3_dca_init(pdev, device->reg_base);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef _IOAT_HW_H_
+#define _IOAT_HW_H_
+
+/* PCI Configuration Space Values */
+#define IOAT_PCI_VID 0x8086
+#define IOAT_MMIO_BAR 0
+
+/* CB device ID's */
+#define IOAT_PCI_DID_5000 0x1A38
+#define IOAT_PCI_DID_CNB 0x360B
+#define IOAT_PCI_DID_SCNB 0x65FF
+#define IOAT_PCI_DID_SNB 0x402F
+
+#define IOAT_PCI_RID 0x00
+#define IOAT_PCI_SVID 0x8086
+#define IOAT_PCI_SID 0x8086
+#define IOAT_VER_1_2 0x12 /* Version 1.2 */
+#define IOAT_VER_2_0 0x20 /* Version 2.0 */
+#define IOAT_VER_3_0 0x30 /* Version 3.0 */
+#define IOAT_VER_3_2 0x32 /* Version 3.2 */
+
+struct ioat_dma_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int null:1;
+ unsigned int src_brk:1;
+ unsigned int dest_brk:1;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int rsvd2:13;
+ #define IOAT_OP_COPY 0x00
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t dst_addr;
+ uint64_t next;
+ uint64_t rsv1;
+ uint64_t rsv2;
+ /* store some driver data in an unused portion of the descriptor */
+ union {
+ uint64_t user1;
+ uint64_t tx_cnt;
+ };
+ uint64_t user2;
+};
+
+struct ioat_fill_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int rsvd:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int rsvd2:2;
+ unsigned int dest_brk:1;
+ unsigned int bundle:1;
+ unsigned int rsvd4:15;
+ #define IOAT_OP_FILL 0x01
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_data;
+ uint64_t dst_addr;
+ uint64_t next;
+ uint64_t rsv1;
+ uint64_t next_dst_addr;
+ uint64_t user1;
+ uint64_t user2;
+};
+
+struct ioat_xor_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int src_cnt:3;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int rsvd:13;
+ #define IOAT_OP_XOR 0x87
+ #define IOAT_OP_XOR_VAL 0x88
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t dst_addr;
+ uint64_t next;
+ uint64_t src_addr2;
+ uint64_t src_addr3;
+ uint64_t src_addr4;
+ uint64_t src_addr5;
+};
+
+struct ioat_xor_ext_descriptor {
+ uint64_t src_addr6;
+ uint64_t src_addr7;
+ uint64_t src_addr8;
+ uint64_t next;
+ uint64_t rsvd[4];
+};
+
+struct ioat_pq_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int src_cnt:3;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int p_disable:1;
+ unsigned int q_disable:1;
+ unsigned int rsvd:11;
+ #define IOAT_OP_PQ 0x89
+ #define IOAT_OP_PQ_VAL 0x8a
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t p_addr;
+ uint64_t next;
+ uint64_t src_addr2;
+ uint64_t src_addr3;
+ uint8_t coef[8];
+ uint64_t q_addr;
+};
+
+struct ioat_pq_ext_descriptor {
+ uint64_t src_addr4;
+ uint64_t src_addr5;
+ uint64_t src_addr6;
+ uint64_t next;
+ uint64_t src_addr7;
+ uint64_t src_addr8;
+ uint64_t rsvd[2];
+};
+
+struct ioat_pq_update_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int src_cnt:3;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int p_disable:1;
+ unsigned int q_disable:1;
+ unsigned int rsvd:3;
+ unsigned int coef:8;
+ #define IOAT_OP_PQ_UP 0x8b
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t p_addr;
+ uint64_t next;
+ uint64_t src_addr2;
+ uint64_t p_src;
+ uint64_t q_src;
+ uint64_t q_addr;
+};
+
+struct ioat_raw_descriptor {
+ uint64_t field[8];
+};
+#endif
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2007 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+/*
+ * This driver supports an Intel I/OAT DMA engine, which does asynchronous
+ * copy operations.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dca.h>
+#include "dma.h"
+#include "dma_v2.h"
+#include "registers.h"
+#include "hw.h"
+
+MODULE_VERSION(IOAT_DMA_VERSION);
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Intel Corporation");
+
+static struct pci_device_id ioat_pci_tbl[] = {
+ /* I/OAT v1 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SCNB) },
+ { PCI_VDEVICE(UNISYS, PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR) },
+
+ /* I/OAT v2 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB) },
+
+ /* I/OAT v3 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG0) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG1) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG2) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG3) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG4) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG5) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG6) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG7) },
+
+ /* I/OAT v3.2 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF0) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF1) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF2) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF3) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF4) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF5) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF6) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF7) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF8) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF9) },
+
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, ioat_pci_tbl);
+
+static int __devinit ioat_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+static void __devexit ioat_remove(struct pci_dev *pdev);
+
+static int ioat_dca_enabled = 1;
+module_param(ioat_dca_enabled, int, 0644);
+MODULE_PARM_DESC(ioat_dca_enabled, "control support of dca service (default: 1)");
+
+struct kmem_cache *ioat2_cache;
+
+#define DRV_NAME "ioatdma"
+
+static struct pci_driver ioat_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ioat_pci_tbl,
+ .probe = ioat_pci_probe,
+ .remove = __devexit_p(ioat_remove),
+};
+
+static struct ioatdma_device *
+alloc_ioatdma(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct device *dev = &pdev->dev;
+ struct ioatdma_device *d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+
+ if (!d)
+ return NULL;
+ d->pdev = pdev;
+ d->reg_base = iobase;
+ return d;
+}
+
+static int __devinit ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ void __iomem * const *iomap;
+ struct device *dev = &pdev->dev;
+ struct ioatdma_device *device;
+ int err;
+
+ err = pcim_enable_device(pdev);
+ if (err)
+ return err;
+
+ err = pcim_iomap_regions(pdev, 1 << IOAT_MMIO_BAR, DRV_NAME);
+ if (err)
+ return err;
+ iomap = pcim_iomap_table(pdev);
+ if (!iomap)
+ return -ENOMEM;
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err)
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+
+ device = devm_kzalloc(dev, sizeof(*device), GFP_KERNEL);
+ if (!device)
+ return -ENOMEM;
+
+ pci_set_master(pdev);
+
+ device = alloc_ioatdma(pdev, iomap[IOAT_MMIO_BAR]);
+ if (!device)
+ return -ENOMEM;
+ pci_set_drvdata(pdev, device);
+
+ device->version = readb(device->reg_base + IOAT_VER_OFFSET);
+ if (device->version == IOAT_VER_1_2)
+ err = ioat1_dma_probe(device, ioat_dca_enabled);
+ else if (device->version == IOAT_VER_2_0)
+ err = ioat2_dma_probe(device, ioat_dca_enabled);
+ else if (device->version >= IOAT_VER_3_0)
+ err = ioat3_dma_probe(device, ioat_dca_enabled);
+ else
+ return -ENODEV;
+
+ if (err) {
+ dev_err(dev, "Intel(R) I/OAT DMA Engine init failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __devexit ioat_remove(struct pci_dev *pdev)
+{
+ struct ioatdma_device *device = pci_get_drvdata(pdev);
+
+ if (!device)
+ return;
+
+ dev_err(&pdev->dev, "Removing dma and dca services\n");
+ if (device->dca) {
+ unregister_dca_provider(device->dca, &pdev->dev);
+ free_dca_provider(device->dca);
+ device->dca = NULL;
+ }
+ ioat_dma_remove(device);
+}
+
+static int __init ioat_init_module(void)
+{
+ int err;
+
+ pr_info("%s: Intel(R) QuickData Technology Driver %s\n",
+ DRV_NAME, IOAT_DMA_VERSION);
+
+ ioat2_cache = kmem_cache_create("ioat2", sizeof(struct ioat_ring_ent),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!ioat2_cache)
+ return -ENOMEM;
+
+ err = pci_register_driver(&ioat_pci_driver);
+ if (err)
+ kmem_cache_destroy(ioat2_cache);
+
+ return err;
+}
+module_init(ioat_init_module);
+
+static void __exit ioat_exit_module(void)
+{
+ pci_unregister_driver(&ioat_pci_driver);
+ kmem_cache_destroy(ioat2_cache);
+}
+module_exit(ioat_exit_module);
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef _IOAT_REGISTERS_H_
+#define _IOAT_REGISTERS_H_
+
+#define IOAT_PCI_DMACTRL_OFFSET 0x48
+#define IOAT_PCI_DMACTRL_DMA_EN 0x00000001
+#define IOAT_PCI_DMACTRL_MSI_EN 0x00000002
+
+#define IOAT_PCI_DEVICE_ID_OFFSET 0x02
+#define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148
+#define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184
+
+/* MMIO Device Registers */
+#define IOAT_CHANCNT_OFFSET 0x00 /* 8-bit */
+
+#define IOAT_XFERCAP_OFFSET 0x01 /* 8-bit */
+#define IOAT_XFERCAP_4KB 12
+#define IOAT_XFERCAP_8KB 13
+#define IOAT_XFERCAP_16KB 14
+#define IOAT_XFERCAP_32KB 15
+#define IOAT_XFERCAP_32GB 0
+
+#define IOAT_GENCTRL_OFFSET 0x02 /* 8-bit */
+#define IOAT_GENCTRL_DEBUG_EN 0x01
+
+#define IOAT_INTRCTRL_OFFSET 0x03 /* 8-bit */
+#define IOAT_INTRCTRL_MASTER_INT_EN 0x01 /* Master Interrupt Enable */
+#define IOAT_INTRCTRL_INT_STATUS 0x02 /* ATTNSTATUS -or- Channel Int */
+#define IOAT_INTRCTRL_INT 0x04 /* INT_STATUS -and- MASTER_INT_EN */
+#define IOAT_INTRCTRL_MSIX_VECTOR_CONTROL 0x08 /* Enable all MSI-X vectors */
+
+#define IOAT_ATTNSTATUS_OFFSET 0x04 /* Each bit is a channel */
+
+#define IOAT_VER_OFFSET 0x08 /* 8-bit */
+#define IOAT_VER_MAJOR_MASK 0xF0
+#define IOAT_VER_MINOR_MASK 0x0F
+#define GET_IOAT_VER_MAJOR(x) (((x) & IOAT_VER_MAJOR_MASK) >> 4)
+#define GET_IOAT_VER_MINOR(x) ((x) & IOAT_VER_MINOR_MASK)
+
+#define IOAT_PERPORTOFFSET_OFFSET 0x0A /* 16-bit */
+
+#define IOAT_INTRDELAY_OFFSET 0x0C /* 16-bit */
+#define IOAT_INTRDELAY_INT_DELAY_MASK 0x3FFF /* Interrupt Delay Time */
+#define IOAT_INTRDELAY_COALESE_SUPPORT 0x8000 /* Interrupt Coalescing Supported */
+
+#define IOAT_DEVICE_STATUS_OFFSET 0x0E /* 16-bit */
+#define IOAT_DEVICE_STATUS_DEGRADED_MODE 0x0001
+#define IOAT_DEVICE_MMIO_RESTRICTED 0x0002
+#define IOAT_DEVICE_MEMORY_BYPASS 0x0004
+#define IOAT_DEVICE_ADDRESS_REMAPPING 0x0008
+
+#define IOAT_DMA_CAP_OFFSET 0x10 /* 32-bit */
+#define IOAT_CAP_PAGE_BREAK 0x00000001
+#define IOAT_CAP_CRC 0x00000002
+#define IOAT_CAP_SKIP_MARKER 0x00000004
+#define IOAT_CAP_DCA 0x00000010
+#define IOAT_CAP_CRC_MOVE 0x00000020
+#define IOAT_CAP_FILL_BLOCK 0x00000040
+#define IOAT_CAP_APIC 0x00000080
+#define IOAT_CAP_XOR 0x00000100
+#define IOAT_CAP_PQ 0x00000200
+
+#define IOAT_CHANNEL_MMIO_SIZE 0x80 /* Each Channel MMIO space is this size */
+
+/* DMA Channel Registers */
+#define IOAT_CHANCTRL_OFFSET 0x00 /* 16-bit Channel Control Register */
+#define IOAT_CHANCTRL_CHANNEL_PRIORITY_MASK 0xF000
+#define IOAT3_CHANCTRL_COMPL_DCA_EN 0x0200
+#define IOAT_CHANCTRL_CHANNEL_IN_USE 0x0100
+#define IOAT_CHANCTRL_DESCRIPTOR_ADDR_SNOOP_CONTROL 0x0020
+#define IOAT_CHANCTRL_ERR_INT_EN 0x0010
+#define IOAT_CHANCTRL_ANY_ERR_ABORT_EN 0x0008
+#define IOAT_CHANCTRL_ERR_COMPLETION_EN 0x0004
+#define IOAT_CHANCTRL_INT_REARM 0x0001
+#define IOAT_CHANCTRL_RUN (IOAT_CHANCTRL_INT_REARM |\
+ IOAT_CHANCTRL_ERR_COMPLETION_EN |\
+ IOAT_CHANCTRL_ANY_ERR_ABORT_EN |\
+ IOAT_CHANCTRL_ERR_INT_EN)
+
+#define IOAT_DMA_COMP_OFFSET 0x02 /* 16-bit DMA channel compatibility */
+#define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with DMA version 1 */
+#define IOAT_DMA_COMP_V2 0x0002 /* Compatibility with DMA version 2 */
+
+
+#define IOAT1_CHANSTS_OFFSET 0x04 /* 64-bit Channel Status Register */
+#define IOAT2_CHANSTS_OFFSET 0x08 /* 64-bit Channel Status Register */
+#define IOAT_CHANSTS_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANSTS_OFFSET : IOAT2_CHANSTS_OFFSET)
+#define IOAT1_CHANSTS_OFFSET_LOW 0x04
+#define IOAT2_CHANSTS_OFFSET_LOW 0x08
+#define IOAT_CHANSTS_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANSTS_OFFSET_LOW : IOAT2_CHANSTS_OFFSET_LOW)
+#define IOAT1_CHANSTS_OFFSET_HIGH 0x08
+#define IOAT2_CHANSTS_OFFSET_HIGH 0x0C
+#define IOAT_CHANSTS_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANSTS_OFFSET_HIGH : IOAT2_CHANSTS_OFFSET_HIGH)
+#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR (~0x3fULL)
+#define IOAT_CHANSTS_SOFT_ERR 0x10ULL
+#define IOAT_CHANSTS_UNAFFILIATED_ERR 0x8ULL
+#define IOAT_CHANSTS_STATUS 0x7ULL
+#define IOAT_CHANSTS_ACTIVE 0x0
+#define IOAT_CHANSTS_DONE 0x1
+#define IOAT_CHANSTS_SUSPENDED 0x2
+#define IOAT_CHANSTS_HALTED 0x3
+
+
+
+#define IOAT_CHAN_DMACOUNT_OFFSET 0x06 /* 16-bit DMA Count register */
+
+#define IOAT_DCACTRL_OFFSET 0x30 /* 32 bit Direct Cache Access Control Register */
+#define IOAT_DCACTRL_CMPL_WRITE_ENABLE 0x10000
+#define IOAT_DCACTRL_TARGET_CPU_MASK 0xFFFF /* APIC ID */
+
+/* CB DCA Memory Space Registers */
+#define IOAT_DCAOFFSET_OFFSET 0x14
+/* CB_BAR + IOAT_DCAOFFSET value */
+#define IOAT_DCA_VER_OFFSET 0x00
+#define IOAT_DCA_VER_MAJOR_MASK 0xF0
+#define IOAT_DCA_VER_MINOR_MASK 0x0F
+
+#define IOAT_DCA_COMP_OFFSET 0x02
+#define IOAT_DCA_COMP_V1 0x1
+
+#define IOAT_FSB_CAPABILITY_OFFSET 0x04
+#define IOAT_FSB_CAPABILITY_PREFETCH 0x1
+
+#define IOAT_PCI_CAPABILITY_OFFSET 0x06
+#define IOAT_PCI_CAPABILITY_MEMWR 0x1
+
+#define IOAT_FSB_CAP_ENABLE_OFFSET 0x08
+#define IOAT_FSB_CAP_ENABLE_PREFETCH 0x1
+
+#define IOAT_PCI_CAP_ENABLE_OFFSET 0x0A
+#define IOAT_PCI_CAP_ENABLE_MEMWR 0x1
+
+#define IOAT_APICID_TAG_MAP_OFFSET 0x0C
+#define IOAT_APICID_TAG_MAP_TAG0 0x0000000F
+#define IOAT_APICID_TAG_MAP_TAG0_SHIFT 0
+#define IOAT_APICID_TAG_MAP_TAG1 0x000000F0
+#define IOAT_APICID_TAG_MAP_TAG1_SHIFT 4
+#define IOAT_APICID_TAG_MAP_TAG2 0x00000F00
+#define IOAT_APICID_TAG_MAP_TAG2_SHIFT 8
+#define IOAT_APICID_TAG_MAP_TAG3 0x0000F000
+#define IOAT_APICID_TAG_MAP_TAG3_SHIFT 12
+#define IOAT_APICID_TAG_MAP_TAG4 0x000F0000
+#define IOAT_APICID_TAG_MAP_TAG4_SHIFT 16
+#define IOAT_APICID_TAG_CB2_VALID 0x8080808080
+
+#define IOAT_DCA_GREQID_OFFSET 0x10
+#define IOAT_DCA_GREQID_SIZE 0x04
+#define IOAT_DCA_GREQID_MASK 0xFFFF
+#define IOAT_DCA_GREQID_IGNOREFUN 0x10000000
+#define IOAT_DCA_GREQID_VALID 0x20000000
+#define IOAT_DCA_GREQID_LASTID 0x80000000
+
+#define IOAT3_CSI_CAPABILITY_OFFSET 0x08
+#define IOAT3_CSI_CAPABILITY_PREFETCH 0x1
+
+#define IOAT3_PCI_CAPABILITY_OFFSET 0x0A
+#define IOAT3_PCI_CAPABILITY_MEMWR 0x1
+
+#define IOAT3_CSI_CONTROL_OFFSET 0x0C
+#define IOAT3_CSI_CONTROL_PREFETCH 0x1
+
+#define IOAT3_PCI_CONTROL_OFFSET 0x0E
+#define IOAT3_PCI_CONTROL_MEMWR 0x1
+
+#define IOAT3_APICID_TAG_MAP_OFFSET 0x10
+#define IOAT3_APICID_TAG_MAP_OFFSET_LOW 0x10
+#define IOAT3_APICID_TAG_MAP_OFFSET_HIGH 0x14
+
+#define IOAT3_DCA_GREQID_OFFSET 0x02
+
+#define IOAT1_CHAINADDR_OFFSET 0x0C /* 64-bit Descriptor Chain Address Register */
+#define IOAT2_CHAINADDR_OFFSET 0x10 /* 64-bit Descriptor Chain Address Register */
+#define IOAT_CHAINADDR_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHAINADDR_OFFSET : IOAT2_CHAINADDR_OFFSET)
+#define IOAT1_CHAINADDR_OFFSET_LOW 0x0C
+#define IOAT2_CHAINADDR_OFFSET_LOW 0x10
+#define IOAT_CHAINADDR_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHAINADDR_OFFSET_LOW : IOAT2_CHAINADDR_OFFSET_LOW)
+#define IOAT1_CHAINADDR_OFFSET_HIGH 0x10
+#define IOAT2_CHAINADDR_OFFSET_HIGH 0x14
+#define IOAT_CHAINADDR_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHAINADDR_OFFSET_HIGH : IOAT2_CHAINADDR_OFFSET_HIGH)
+
+#define IOAT1_CHANCMD_OFFSET 0x14 /* 8-bit DMA Channel Command Register */
+#define IOAT2_CHANCMD_OFFSET 0x04 /* 8-bit DMA Channel Command Register */
+#define IOAT_CHANCMD_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANCMD_OFFSET : IOAT2_CHANCMD_OFFSET)
+#define IOAT_CHANCMD_RESET 0x20
+#define IOAT_CHANCMD_RESUME 0x10
+#define IOAT_CHANCMD_ABORT 0x08
+#define IOAT_CHANCMD_SUSPEND 0x04
+#define IOAT_CHANCMD_APPEND 0x02
+#define IOAT_CHANCMD_START 0x01
+
+#define IOAT_CHANCMP_OFFSET 0x18 /* 64-bit Channel Completion Address Register */
+#define IOAT_CHANCMP_OFFSET_LOW 0x18
+#define IOAT_CHANCMP_OFFSET_HIGH 0x1C
+
+#define IOAT_CDAR_OFFSET 0x20 /* 64-bit Current Descriptor Address Register */
+#define IOAT_CDAR_OFFSET_LOW 0x20
+#define IOAT_CDAR_OFFSET_HIGH 0x24
+
+#define IOAT_CHANERR_OFFSET 0x28 /* 32-bit Channel Error Register */
+#define IOAT_CHANERR_SRC_ADDR_ERR 0x0001
+#define IOAT_CHANERR_DEST_ADDR_ERR 0x0002
+#define IOAT_CHANERR_NEXT_ADDR_ERR 0x0004
+#define IOAT_CHANERR_NEXT_DESC_ALIGN_ERR 0x0008
+#define IOAT_CHANERR_CHAIN_ADDR_VALUE_ERR 0x0010
+#define IOAT_CHANERR_CHANCMD_ERR 0x0020
+#define IOAT_CHANERR_CHIPSET_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0040
+#define IOAT_CHANERR_DMA_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0080
+#define IOAT_CHANERR_READ_DATA_ERR 0x0100
+#define IOAT_CHANERR_WRITE_DATA_ERR 0x0200
+#define IOAT_CHANERR_CONTROL_ERR 0x0400
+#define IOAT_CHANERR_LENGTH_ERR 0x0800
+#define IOAT_CHANERR_COMPLETION_ADDR_ERR 0x1000
+#define IOAT_CHANERR_INT_CONFIGURATION_ERR 0x2000
+#define IOAT_CHANERR_SOFT_ERR 0x4000
+#define IOAT_CHANERR_UNAFFILIATED_ERR 0x8000
+#define IOAT_CHANERR_XOR_P_OR_CRC_ERR 0x10000
+#define IOAT_CHANERR_XOR_Q_ERR 0x20000
+#define IOAT_CHANERR_DESCRIPTOR_COUNT_ERR 0x40000
+
+#define IOAT_CHANERR_HANDLE_MASK (IOAT_CHANERR_XOR_P_OR_CRC_ERR | IOAT_CHANERR_XOR_Q_ERR)
+
+#define IOAT_CHANERR_MASK_OFFSET 0x2C /* 32-bit Channel Error Register */
+
+#endif /* _IOAT_REGISTERS_H_ */
+++ /dev/null
-/*
- * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 - 2009 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/dca.h>
-
-/* either a kernel change is needed, or we need something like this in kernel */
-#ifndef CONFIG_SMP
-#include <asm/smp.h>
-#undef cpu_physical_id
-#define cpu_physical_id(cpu) (cpuid_ebx(1) >> 24)
-#endif
-
-#include "ioatdma.h"
-#include "ioatdma_registers.h"
-
-/*
- * Bit 7 of a tag map entry is the "valid" bit, if it is set then bits 0:6
- * contain the bit number of the APIC ID to map into the DCA tag. If the valid
- * bit is not set, then the value must be 0 or 1 and defines the bit in the tag.
- */
-#define DCA_TAG_MAP_VALID 0x80
-
-#define DCA3_TAG_MAP_BIT_TO_INV 0x80
-#define DCA3_TAG_MAP_BIT_TO_SEL 0x40
-#define DCA3_TAG_MAP_LITERAL_VAL 0x1
-
-#define DCA_TAG_MAP_MASK 0xDF
-
-/* expected tag map bytes for I/OAT ver.2 */
-#define DCA2_TAG_MAP_BYTE0 0x80
-#define DCA2_TAG_MAP_BYTE1 0x0
-#define DCA2_TAG_MAP_BYTE2 0x81
-#define DCA2_TAG_MAP_BYTE3 0x82
-#define DCA2_TAG_MAP_BYTE4 0x82
-
-/* verify if tag map matches expected values */
-static inline int dca2_tag_map_valid(u8 *tag_map)
-{
- return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
- (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
- (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
- (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
- (tag_map[4] == DCA2_TAG_MAP_BYTE4));
-}
-
-/*
- * "Legacy" DCA systems do not implement the DCA register set in the
- * I/OAT device. Software needs direct support for their tag mappings.
- */
-
-#define APICID_BIT(x) (DCA_TAG_MAP_VALID | (x))
-#define IOAT_TAG_MAP_LEN 8
-
-static u8 ioat_tag_map_BNB[IOAT_TAG_MAP_LEN] = {
- 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
-static u8 ioat_tag_map_SCNB[IOAT_TAG_MAP_LEN] = {
- 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
-static u8 ioat_tag_map_CNB[IOAT_TAG_MAP_LEN] = {
- 1, APICID_BIT(1), APICID_BIT(3), APICID_BIT(4), APICID_BIT(2), };
-static u8 ioat_tag_map_UNISYS[IOAT_TAG_MAP_LEN] = { 0 };
-
-/* pack PCI B/D/F into a u16 */
-static inline u16 dcaid_from_pcidev(struct pci_dev *pci)
-{
- return (pci->bus->number << 8) | pci->devfn;
-}
-
-static int dca_enabled_in_bios(struct pci_dev *pdev)
-{
- /* CPUID level 9 returns DCA configuration */
- /* Bit 0 indicates DCA enabled by the BIOS */
- unsigned long cpuid_level_9;
- int res;
-
- cpuid_level_9 = cpuid_eax(9);
- res = test_bit(0, &cpuid_level_9);
- if (!res)
- dev_err(&pdev->dev, "DCA is disabled in BIOS\n");
-
- return res;
-}
-
-static int system_has_dca_enabled(struct pci_dev *pdev)
-{
- if (boot_cpu_has(X86_FEATURE_DCA))
- return dca_enabled_in_bios(pdev);
-
- dev_err(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n");
- return 0;
-}
-
-struct ioat_dca_slot {
- struct pci_dev *pdev; /* requester device */
- u16 rid; /* requester id, as used by IOAT */
-};
-
-#define IOAT_DCA_MAX_REQ 6
-#define IOAT3_DCA_MAX_REQ 2
-
-struct ioat_dca_priv {
- void __iomem *iobase;
- void __iomem *dca_base;
- int max_requesters;
- int requester_count;
- u8 tag_map[IOAT_TAG_MAP_LEN];
- struct ioat_dca_slot req_slots[0];
-};
-
-/* 5000 series chipset DCA Port Requester ID Table Entry Format
- * [15:8] PCI-Express Bus Number
- * [7:3] PCI-Express Device Number
- * [2:0] PCI-Express Function Number
- *
- * 5000 series chipset DCA control register format
- * [7:1] Reserved (0)
- * [0] Ignore Function Number
- */
-
-static int ioat_dca_add_requester(struct dca_provider *dca, struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 id;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
- id = dcaid_from_pcidev(pdev);
-
- if (ioatdca->requester_count == ioatdca->max_requesters)
- return -ENODEV;
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == NULL) {
- /* found an empty slot */
- ioatdca->requester_count++;
- ioatdca->req_slots[i].pdev = pdev;
- ioatdca->req_slots[i].rid = id;
- writew(id, ioatdca->dca_base + (i * 4));
- /* make sure the ignore function bit is off */
- writeb(0, ioatdca->dca_base + (i * 4) + 2);
- return i;
- }
- }
- /* Error, ioatdma->requester_count is out of whack */
- return -EFAULT;
-}
-
-static int ioat_dca_remove_requester(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev) {
- writew(0, ioatdca->dca_base + (i * 4));
- ioatdca->req_slots[i].pdev = NULL;
- ioatdca->req_slots[i].rid = 0;
- ioatdca->requester_count--;
- return i;
- }
- }
- return -ENODEV;
-}
-
-static u8 ioat_dca_get_tag(struct dca_provider *dca,
- struct device *dev,
- int cpu)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- int i, apic_id, bit, value;
- u8 entry, tag;
-
- tag = 0;
- apic_id = cpu_physical_id(cpu);
-
- for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
- entry = ioatdca->tag_map[i];
- if (entry & DCA_TAG_MAP_VALID) {
- bit = entry & ~DCA_TAG_MAP_VALID;
- value = (apic_id & (1 << bit)) ? 1 : 0;
- } else {
- value = entry ? 1 : 0;
- }
- tag |= (value << i);
- }
- return tag;
-}
-
-static int ioat_dca_dev_managed(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
-
- pdev = to_pci_dev(dev);
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev)
- return 1;
- }
- return 0;
-}
-
-static struct dca_ops ioat_dca_ops = {
- .add_requester = ioat_dca_add_requester,
- .remove_requester = ioat_dca_remove_requester,
- .get_tag = ioat_dca_get_tag,
- .dev_managed = ioat_dca_dev_managed,
-};
-
-
-struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase)
-{
- struct dca_provider *dca;
- struct ioat_dca_priv *ioatdca;
- u8 *tag_map = NULL;
- int i;
- int err;
- u8 version;
- u8 max_requesters;
-
- if (!system_has_dca_enabled(pdev))
- return NULL;
-
- /* I/OAT v1 systems must have a known tag_map to support DCA */
- switch (pdev->vendor) {
- case PCI_VENDOR_ID_INTEL:
- switch (pdev->device) {
- case PCI_DEVICE_ID_INTEL_IOAT:
- tag_map = ioat_tag_map_BNB;
- break;
- case PCI_DEVICE_ID_INTEL_IOAT_CNB:
- tag_map = ioat_tag_map_CNB;
- break;
- case PCI_DEVICE_ID_INTEL_IOAT_SCNB:
- tag_map = ioat_tag_map_SCNB;
- break;
- }
- break;
- case PCI_VENDOR_ID_UNISYS:
- switch (pdev->device) {
- case PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR:
- tag_map = ioat_tag_map_UNISYS;
- break;
- }
- break;
- }
- if (tag_map == NULL)
- return NULL;
-
- version = readb(iobase + IOAT_VER_OFFSET);
- if (version == IOAT_VER_3_0)
- max_requesters = IOAT3_DCA_MAX_REQ;
- else
- max_requesters = IOAT_DCA_MAX_REQ;
-
- dca = alloc_dca_provider(&ioat_dca_ops,
- sizeof(*ioatdca) +
- (sizeof(struct ioat_dca_slot) * max_requesters));
- if (!dca)
- return NULL;
-
- ioatdca = dca_priv(dca);
- ioatdca->max_requesters = max_requesters;
- ioatdca->dca_base = iobase + 0x54;
-
- /* copy over the APIC ID to DCA tag mapping */
- for (i = 0; i < IOAT_TAG_MAP_LEN; i++)
- ioatdca->tag_map[i] = tag_map[i];
-
- err = register_dca_provider(dca, &pdev->dev);
- if (err) {
- free_dca_provider(dca);
- return NULL;
- }
-
- return dca;
-}
-
-
-static int ioat2_dca_add_requester(struct dca_provider *dca, struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 id;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
- id = dcaid_from_pcidev(pdev);
-
- if (ioatdca->requester_count == ioatdca->max_requesters)
- return -ENODEV;
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == NULL) {
- /* found an empty slot */
- ioatdca->requester_count++;
- ioatdca->req_slots[i].pdev = pdev;
- ioatdca->req_slots[i].rid = id;
- global_req_table =
- readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
- writel(id | IOAT_DCA_GREQID_VALID,
- ioatdca->iobase + global_req_table + (i * 4));
- return i;
- }
- }
- /* Error, ioatdma->requester_count is out of whack */
- return -EFAULT;
-}
-
-static int ioat2_dca_remove_requester(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev) {
- global_req_table =
- readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
- writel(0, ioatdca->iobase + global_req_table + (i * 4));
- ioatdca->req_slots[i].pdev = NULL;
- ioatdca->req_slots[i].rid = 0;
- ioatdca->requester_count--;
- return i;
- }
- }
- return -ENODEV;
-}
-
-static u8 ioat2_dca_get_tag(struct dca_provider *dca,
- struct device *dev,
- int cpu)
-{
- u8 tag;
-
- tag = ioat_dca_get_tag(dca, dev, cpu);
- tag = (~tag) & 0x1F;
- return tag;
-}
-
-static struct dca_ops ioat2_dca_ops = {
- .add_requester = ioat2_dca_add_requester,
- .remove_requester = ioat2_dca_remove_requester,
- .get_tag = ioat2_dca_get_tag,
- .dev_managed = ioat_dca_dev_managed,
-};
-
-static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
-{
- int slots = 0;
- u32 req;
- u16 global_req_table;
-
- global_req_table = readw(iobase + dca_offset + IOAT_DCA_GREQID_OFFSET);
- if (global_req_table == 0)
- return 0;
- do {
- req = readl(iobase + global_req_table + (slots * sizeof(u32)));
- slots++;
- } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
-
- return slots;
-}
-
-struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase)
-{
- struct dca_provider *dca;
- struct ioat_dca_priv *ioatdca;
- int slots;
- int i;
- int err;
- u32 tag_map;
- u16 dca_offset;
- u16 csi_fsb_control;
- u16 pcie_control;
- u8 bit;
-
- if (!system_has_dca_enabled(pdev))
- return NULL;
-
- dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
- if (dca_offset == 0)
- return NULL;
-
- slots = ioat2_dca_count_dca_slots(iobase, dca_offset);
- if (slots == 0)
- return NULL;
-
- dca = alloc_dca_provider(&ioat2_dca_ops,
- sizeof(*ioatdca)
- + (sizeof(struct ioat_dca_slot) * slots));
- if (!dca)
- return NULL;
-
- ioatdca = dca_priv(dca);
- ioatdca->iobase = iobase;
- ioatdca->dca_base = iobase + dca_offset;
- ioatdca->max_requesters = slots;
-
- /* some bios might not know to turn these on */
- csi_fsb_control = readw(ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
- if ((csi_fsb_control & IOAT_FSB_CAP_ENABLE_PREFETCH) == 0) {
- csi_fsb_control |= IOAT_FSB_CAP_ENABLE_PREFETCH;
- writew(csi_fsb_control,
- ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
- }
- pcie_control = readw(ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
- if ((pcie_control & IOAT_PCI_CAP_ENABLE_MEMWR) == 0) {
- pcie_control |= IOAT_PCI_CAP_ENABLE_MEMWR;
- writew(pcie_control,
- ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
- }
-
-
- /* TODO version, compatibility and configuration checks */
-
- /* copy out the APIC to DCA tag map */
- tag_map = readl(ioatdca->dca_base + IOAT_APICID_TAG_MAP_OFFSET);
- for (i = 0; i < 5; i++) {
- bit = (tag_map >> (4 * i)) & 0x0f;
- if (bit < 8)
- ioatdca->tag_map[i] = bit | DCA_TAG_MAP_VALID;
- else
- ioatdca->tag_map[i] = 0;
- }
-
- if (!dca2_tag_map_valid(ioatdca->tag_map)) {
- dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
- "disabling DCA\n");
- free_dca_provider(dca);
- return NULL;
- }
-
- err = register_dca_provider(dca, &pdev->dev);
- if (err) {
- free_dca_provider(dca);
- return NULL;
- }
-
- return dca;
-}
-
-static int ioat3_dca_add_requester(struct dca_provider *dca, struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 id;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
- id = dcaid_from_pcidev(pdev);
-
- if (ioatdca->requester_count == ioatdca->max_requesters)
- return -ENODEV;
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == NULL) {
- /* found an empty slot */
- ioatdca->requester_count++;
- ioatdca->req_slots[i].pdev = pdev;
- ioatdca->req_slots[i].rid = id;
- global_req_table =
- readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
- writel(id | IOAT_DCA_GREQID_VALID,
- ioatdca->iobase + global_req_table + (i * 4));
- return i;
- }
- }
- /* Error, ioatdma->requester_count is out of whack */
- return -EFAULT;
-}
-
-static int ioat3_dca_remove_requester(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev) {
- global_req_table =
- readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
- writel(0, ioatdca->iobase + global_req_table + (i * 4));
- ioatdca->req_slots[i].pdev = NULL;
- ioatdca->req_slots[i].rid = 0;
- ioatdca->requester_count--;
- return i;
- }
- }
- return -ENODEV;
-}
-
-static u8 ioat3_dca_get_tag(struct dca_provider *dca,
- struct device *dev,
- int cpu)
-{
- u8 tag;
-
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- int i, apic_id, bit, value;
- u8 entry;
-
- tag = 0;
- apic_id = cpu_physical_id(cpu);
-
- for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
- entry = ioatdca->tag_map[i];
- if (entry & DCA3_TAG_MAP_BIT_TO_SEL) {
- bit = entry &
- ~(DCA3_TAG_MAP_BIT_TO_SEL | DCA3_TAG_MAP_BIT_TO_INV);
- value = (apic_id & (1 << bit)) ? 1 : 0;
- } else if (entry & DCA3_TAG_MAP_BIT_TO_INV) {
- bit = entry & ~DCA3_TAG_MAP_BIT_TO_INV;
- value = (apic_id & (1 << bit)) ? 0 : 1;
- } else {
- value = (entry & DCA3_TAG_MAP_LITERAL_VAL) ? 1 : 0;
- }
- tag |= (value << i);
- }
-
- return tag;
-}
-
-static struct dca_ops ioat3_dca_ops = {
- .add_requester = ioat3_dca_add_requester,
- .remove_requester = ioat3_dca_remove_requester,
- .get_tag = ioat3_dca_get_tag,
- .dev_managed = ioat_dca_dev_managed,
-};
-
-static int ioat3_dca_count_dca_slots(void *iobase, u16 dca_offset)
-{
- int slots = 0;
- u32 req;
- u16 global_req_table;
-
- global_req_table = readw(iobase + dca_offset + IOAT3_DCA_GREQID_OFFSET);
- if (global_req_table == 0)
- return 0;
-
- do {
- req = readl(iobase + global_req_table + (slots * sizeof(u32)));
- slots++;
- } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
-
- return slots;
-}
-
-struct dca_provider *ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase)
-{
- struct dca_provider *dca;
- struct ioat_dca_priv *ioatdca;
- int slots;
- int i;
- int err;
- u16 dca_offset;
- u16 csi_fsb_control;
- u16 pcie_control;
- u8 bit;
-
- union {
- u64 full;
- struct {
- u32 low;
- u32 high;
- };
- } tag_map;
-
- if (!system_has_dca_enabled(pdev))
- return NULL;
-
- dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
- if (dca_offset == 0)
- return NULL;
-
- slots = ioat3_dca_count_dca_slots(iobase, dca_offset);
- if (slots == 0)
- return NULL;
-
- dca = alloc_dca_provider(&ioat3_dca_ops,
- sizeof(*ioatdca)
- + (sizeof(struct ioat_dca_slot) * slots));
- if (!dca)
- return NULL;
-
- ioatdca = dca_priv(dca);
- ioatdca->iobase = iobase;
- ioatdca->dca_base = iobase + dca_offset;
- ioatdca->max_requesters = slots;
-
- /* some bios might not know to turn these on */
- csi_fsb_control = readw(ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
- if ((csi_fsb_control & IOAT3_CSI_CONTROL_PREFETCH) == 0) {
- csi_fsb_control |= IOAT3_CSI_CONTROL_PREFETCH;
- writew(csi_fsb_control,
- ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
- }
- pcie_control = readw(ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
- if ((pcie_control & IOAT3_PCI_CONTROL_MEMWR) == 0) {
- pcie_control |= IOAT3_PCI_CONTROL_MEMWR;
- writew(pcie_control,
- ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
- }
-
-
- /* TODO version, compatibility and configuration checks */
-
- /* copy out the APIC to DCA tag map */
- tag_map.low =
- readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_LOW);
- tag_map.high =
- readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_HIGH);
- for (i = 0; i < 8; i++) {
- bit = tag_map.full >> (8 * i);
- ioatdca->tag_map[i] = bit & DCA_TAG_MAP_MASK;
- }
-
- err = register_dca_provider(dca, &pdev->dev);
- if (err) {
- free_dca_provider(dca);
- return NULL;
- }
-
- return dca;
-}
+++ /dev/null
-/*
- * Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2009 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- */
-
-/*
- * This driver supports an Intel I/OAT DMA engine, which does asynchronous
- * copy operations.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/dmaengine.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-#include <linux/i7300_idle.h>
-#include "ioatdma.h"
-#include "ioatdma_registers.h"
-#include "ioatdma_hw.h"
-
-#define to_ioat_chan(chan) container_of(chan, struct ioat_dma_chan, common)
-#define to_ioatdma_device(dev) container_of(dev, struct ioatdma_device, common)
-#define to_ioat_desc(lh) container_of(lh, struct ioat_desc_sw, node)
-#define tx_to_ioat_desc(tx) container_of(tx, struct ioat_desc_sw, async_tx)
-
-#define chan_num(ch) ((int)((ch)->reg_base - (ch)->device->reg_base) / 0x80)
-static int ioat_pending_level = 4;
-module_param(ioat_pending_level, int, 0644);
-MODULE_PARM_DESC(ioat_pending_level,
- "high-water mark for pushing ioat descriptors (default: 4)");
-
-#define RESET_DELAY msecs_to_jiffies(100)
-#define WATCHDOG_DELAY round_jiffies(msecs_to_jiffies(2000))
-static void ioat_dma_chan_reset_part2(struct work_struct *work);
-static void ioat_dma_chan_watchdog(struct work_struct *work);
-
-/*
- * workaround for IOAT ver.3.0 null descriptor issue
- * (channel returns error when size is 0)
- */
-#define NULL_DESC_BUFFER_SIZE 1
-
-/* internal functions */
-static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan);
-static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan);
-
-static struct ioat_desc_sw *
-ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan);
-static struct ioat_desc_sw *
-ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan);
-
-static inline struct ioat_dma_chan *ioat_lookup_chan_by_index(
- struct ioatdma_device *device,
- int index)
-{
- return device->idx[index];
-}
-
-/**
- * ioat_dma_do_interrupt - handler used for single vector interrupt mode
- * @irq: interrupt id
- * @data: interrupt data
- */
-static irqreturn_t ioat_dma_do_interrupt(int irq, void *data)
-{
- struct ioatdma_device *instance = data;
- struct ioat_dma_chan *ioat_chan;
- unsigned long attnstatus;
- int bit;
- u8 intrctrl;
-
- intrctrl = readb(instance->reg_base + IOAT_INTRCTRL_OFFSET);
-
- if (!(intrctrl & IOAT_INTRCTRL_MASTER_INT_EN))
- return IRQ_NONE;
-
- if (!(intrctrl & IOAT_INTRCTRL_INT_STATUS)) {
- writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
- return IRQ_NONE;
- }
-
- attnstatus = readl(instance->reg_base + IOAT_ATTNSTATUS_OFFSET);
- for_each_bit(bit, &attnstatus, BITS_PER_LONG) {
- ioat_chan = ioat_lookup_chan_by_index(instance, bit);
- tasklet_schedule(&ioat_chan->cleanup_task);
- }
-
- writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
- return IRQ_HANDLED;
-}
-
-/**
- * ioat_dma_do_interrupt_msix - handler used for vector-per-channel interrupt mode
- * @irq: interrupt id
- * @data: interrupt data
- */
-static irqreturn_t ioat_dma_do_interrupt_msix(int irq, void *data)
-{
- struct ioat_dma_chan *ioat_chan = data;
-
- tasklet_schedule(&ioat_chan->cleanup_task);
-
- return IRQ_HANDLED;
-}
-
-static void ioat_dma_cleanup_tasklet(unsigned long data);
-
-/**
- * ioat_dma_enumerate_channels - find and initialize the device's channels
- * @device: the device to be enumerated
- */
-static int ioat_dma_enumerate_channels(struct ioatdma_device *device)
-{
- u8 xfercap_scale;
- u32 xfercap;
- int i;
- struct ioat_dma_chan *ioat_chan;
-
- /*
- * IOAT ver.3 workarounds
- */
- if (device->version == IOAT_VER_3_0) {
- u32 chan_err_mask;
- u16 dev_id;
- u32 dmauncerrsts;
-
- /*
- * Write CHANERRMSK_INT with 3E07h to mask out the errors
- * that can cause stability issues for IOAT ver.3
- */
- chan_err_mask = 0x3E07;
- pci_write_config_dword(device->pdev,
- IOAT_PCI_CHANERRMASK_INT_OFFSET,
- chan_err_mask);
-
- /*
- * Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
- * (workaround for spurious config parity error after restart)
- */
- pci_read_config_word(device->pdev,
- IOAT_PCI_DEVICE_ID_OFFSET,
- &dev_id);
- if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) {
- dmauncerrsts = 0x10;
- pci_write_config_dword(device->pdev,
- IOAT_PCI_DMAUNCERRSTS_OFFSET,
- dmauncerrsts);
- }
- }
-
- device->common.chancnt = readb(device->reg_base + IOAT_CHANCNT_OFFSET);
- xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
- xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
-
-#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
- if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) {
- device->common.chancnt--;
- }
-#endif
- for (i = 0; i < device->common.chancnt; i++) {
- ioat_chan = kzalloc(sizeof(*ioat_chan), GFP_KERNEL);
- if (!ioat_chan) {
- device->common.chancnt = i;
- break;
- }
-
- ioat_chan->device = device;
- ioat_chan->reg_base = device->reg_base + (0x80 * (i + 1));
- ioat_chan->xfercap = xfercap;
- ioat_chan->desccount = 0;
- INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
- if (ioat_chan->device->version == IOAT_VER_2_0)
- writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
- IOAT_DMA_DCA_ANY_CPU,
- ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
- else if (ioat_chan->device->version == IOAT_VER_3_0)
- writel(IOAT_DMA_DCA_ANY_CPU,
- ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
- spin_lock_init(&ioat_chan->cleanup_lock);
- spin_lock_init(&ioat_chan->desc_lock);
- INIT_LIST_HEAD(&ioat_chan->free_desc);
- INIT_LIST_HEAD(&ioat_chan->used_desc);
- /* This should be made common somewhere in dmaengine.c */
- ioat_chan->common.device = &device->common;
- list_add_tail(&ioat_chan->common.device_node,
- &device->common.channels);
- device->idx[i] = ioat_chan;
- tasklet_init(&ioat_chan->cleanup_task,
- ioat_dma_cleanup_tasklet,
- (unsigned long) ioat_chan);
- tasklet_disable(&ioat_chan->cleanup_task);
- }
- return device->common.chancnt;
-}
-
-/**
- * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended
- * descriptors to hw
- * @chan: DMA channel handle
- */
-static inline void __ioat1_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan)
-{
- ioat_chan->pending = 0;
- writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET);
-}
-
-static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
-
- if (ioat_chan->pending > 0) {
- spin_lock_bh(&ioat_chan->desc_lock);
- __ioat1_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
- }
-}
-
-static inline void __ioat2_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan)
-{
- ioat_chan->pending = 0;
- writew(ioat_chan->dmacount,
- ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
-}
-
-static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
-
- if (ioat_chan->pending > 0) {
- spin_lock_bh(&ioat_chan->desc_lock);
- __ioat2_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
- }
-}
-
-
-/**
- * ioat_dma_chan_reset_part2 - reinit the channel after a reset
- */
-static void ioat_dma_chan_reset_part2(struct work_struct *work)
-{
- struct ioat_dma_chan *ioat_chan =
- container_of(work, struct ioat_dma_chan, work.work);
- struct ioat_desc_sw *desc;
-
- spin_lock_bh(&ioat_chan->cleanup_lock);
- spin_lock_bh(&ioat_chan->desc_lock);
-
- ioat_chan->completion_virt->low = 0;
- ioat_chan->completion_virt->high = 0;
- ioat_chan->pending = 0;
-
- /*
- * count the descriptors waiting, and be sure to do it
- * right for both the CB1 line and the CB2 ring
- */
- ioat_chan->dmacount = 0;
- if (ioat_chan->used_desc.prev) {
- desc = to_ioat_desc(ioat_chan->used_desc.prev);
- do {
- ioat_chan->dmacount++;
- desc = to_ioat_desc(desc->node.next);
- } while (&desc->node != ioat_chan->used_desc.next);
- }
-
- /*
- * write the new starting descriptor address
- * this puts channel engine into ARMED state
- */
- desc = to_ioat_desc(ioat_chan->used_desc.prev);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
-
- writeb(IOAT_CHANCMD_START, ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- break;
- case IOAT_VER_2_0:
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
-
- /* tell the engine to go with what's left to be done */
- writew(ioat_chan->dmacount,
- ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
-
- break;
- }
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d reset - %d descs waiting, %d total desc\n",
- chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
-
- spin_unlock_bh(&ioat_chan->desc_lock);
- spin_unlock_bh(&ioat_chan->cleanup_lock);
-}
-
-/**
- * ioat_dma_reset_channel - restart a channel
- * @ioat_chan: IOAT DMA channel handle
- */
-static void ioat_dma_reset_channel(struct ioat_dma_chan *ioat_chan)
-{
- u32 chansts, chanerr;
-
- if (!ioat_chan->used_desc.prev)
- return;
-
- chanerr = readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- chansts = (ioat_chan->completion_virt->low
- & IOAT_CHANSTS_DMA_TRANSFER_STATUS);
- if (chanerr) {
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d, CHANSTS = 0x%08x CHANERR = 0x%04x, clearing\n",
- chan_num(ioat_chan), chansts, chanerr);
- writel(chanerr, ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- }
-
- /*
- * whack it upside the head with a reset
- * and wait for things to settle out.
- * force the pending count to a really big negative
- * to make sure no one forces an issue_pending
- * while we're waiting.
- */
-
- spin_lock_bh(&ioat_chan->desc_lock);
- ioat_chan->pending = INT_MIN;
- writeb(IOAT_CHANCMD_RESET,
- ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- /* schedule the 2nd half instead of sleeping a long time */
- schedule_delayed_work(&ioat_chan->work, RESET_DELAY);
-}
-
-/**
- * ioat_dma_chan_watchdog - watch for stuck channels
- */
-static void ioat_dma_chan_watchdog(struct work_struct *work)
-{
- struct ioatdma_device *device =
- container_of(work, struct ioatdma_device, work.work);
- struct ioat_dma_chan *ioat_chan;
- int i;
-
- union {
- u64 full;
- struct {
- u32 low;
- u32 high;
- };
- } completion_hw;
- unsigned long compl_desc_addr_hw;
-
- for (i = 0; i < device->common.chancnt; i++) {
- ioat_chan = ioat_lookup_chan_by_index(device, i);
-
- if (ioat_chan->device->version == IOAT_VER_1_2
- /* have we started processing anything yet */
- && ioat_chan->last_completion
- /* have we completed any since last watchdog cycle? */
- && (ioat_chan->last_completion ==
- ioat_chan->watchdog_completion)
- /* has TCP stuck on one cookie since last watchdog? */
- && (ioat_chan->watchdog_tcp_cookie ==
- ioat_chan->watchdog_last_tcp_cookie)
- && (ioat_chan->watchdog_tcp_cookie !=
- ioat_chan->completed_cookie)
- /* is there something in the chain to be processed? */
- /* CB1 chain always has at least the last one processed */
- && (ioat_chan->used_desc.prev != ioat_chan->used_desc.next)
- && ioat_chan->pending == 0) {
-
- /*
- * check CHANSTS register for completed
- * descriptor address.
- * if it is different than completion writeback,
- * it is not zero
- * and it has changed since the last watchdog
- * we can assume that channel
- * is still working correctly
- * and the problem is in completion writeback.
- * update completion writeback
- * with actual CHANSTS value
- * else
- * try resetting the channel
- */
-
- completion_hw.low = readl(ioat_chan->reg_base +
- IOAT_CHANSTS_OFFSET_LOW(ioat_chan->device->version));
- completion_hw.high = readl(ioat_chan->reg_base +
- IOAT_CHANSTS_OFFSET_HIGH(ioat_chan->device->version));
-#if (BITS_PER_LONG == 64)
- compl_desc_addr_hw =
- completion_hw.full
- & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
-#else
- compl_desc_addr_hw =
- completion_hw.low & IOAT_LOW_COMPLETION_MASK;
-#endif
-
- if ((compl_desc_addr_hw != 0)
- && (compl_desc_addr_hw != ioat_chan->watchdog_completion)
- && (compl_desc_addr_hw != ioat_chan->last_compl_desc_addr_hw)) {
- ioat_chan->last_compl_desc_addr_hw = compl_desc_addr_hw;
- ioat_chan->completion_virt->low = completion_hw.low;
- ioat_chan->completion_virt->high = completion_hw.high;
- } else {
- ioat_dma_reset_channel(ioat_chan);
- ioat_chan->watchdog_completion = 0;
- ioat_chan->last_compl_desc_addr_hw = 0;
- }
-
- /*
- * for version 2.0 if there are descriptors yet to be processed
- * and the last completed hasn't changed since the last watchdog
- * if they haven't hit the pending level
- * issue the pending to push them through
- * else
- * try resetting the channel
- */
- } else if (ioat_chan->device->version == IOAT_VER_2_0
- && ioat_chan->used_desc.prev
- && ioat_chan->last_completion
- && ioat_chan->last_completion == ioat_chan->watchdog_completion) {
-
- if (ioat_chan->pending < ioat_pending_level)
- ioat2_dma_memcpy_issue_pending(&ioat_chan->common);
- else {
- ioat_dma_reset_channel(ioat_chan);
- ioat_chan->watchdog_completion = 0;
- }
- } else {
- ioat_chan->last_compl_desc_addr_hw = 0;
- ioat_chan->watchdog_completion
- = ioat_chan->last_completion;
- }
-
- ioat_chan->watchdog_last_tcp_cookie =
- ioat_chan->watchdog_tcp_cookie;
- }
-
- schedule_delayed_work(&device->work, WATCHDOG_DELAY);
-}
-
-static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(tx->chan);
- struct ioat_desc_sw *first = tx_to_ioat_desc(tx);
- struct ioat_desc_sw *prev, *new;
- struct ioat_dma_descriptor *hw;
- dma_cookie_t cookie;
- LIST_HEAD(new_chain);
- u32 copy;
- size_t len;
- dma_addr_t src, dst;
- unsigned long orig_flags;
- unsigned int desc_count = 0;
-
- /* src and dest and len are stored in the initial descriptor */
- len = first->len;
- src = first->src;
- dst = first->dst;
- orig_flags = first->async_tx.flags;
- new = first;
-
- spin_lock_bh(&ioat_chan->desc_lock);
- prev = to_ioat_desc(ioat_chan->used_desc.prev);
- prefetch(prev->hw);
- do {
- copy = min_t(size_t, len, ioat_chan->xfercap);
-
- async_tx_ack(&new->async_tx);
-
- hw = new->hw;
- hw->size = copy;
- hw->ctl = 0;
- hw->src_addr = src;
- hw->dst_addr = dst;
- hw->next = 0;
-
- /* chain together the physical address list for the HW */
- wmb();
- prev->hw->next = (u64) new->async_tx.phys;
-
- len -= copy;
- dst += copy;
- src += copy;
-
- list_add_tail(&new->node, &new_chain);
- desc_count++;
- prev = new;
- } while (len && (new = ioat1_dma_get_next_descriptor(ioat_chan)));
-
- if (!new) {
- dev_err(&ioat_chan->device->pdev->dev,
- "tx submit failed\n");
- spin_unlock_bh(&ioat_chan->desc_lock);
- return -ENOMEM;
- }
-
- hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- if (first->async_tx.callback) {
- hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
- if (first != new) {
- /* move callback into to last desc */
- new->async_tx.callback = first->async_tx.callback;
- new->async_tx.callback_param
- = first->async_tx.callback_param;
- first->async_tx.callback = NULL;
- first->async_tx.callback_param = NULL;
- }
- }
-
- new->tx_cnt = desc_count;
- new->async_tx.flags = orig_flags; /* client is in control of this ack */
-
- /* store the original values for use in later cleanup */
- if (new != first) {
- new->src = first->src;
- new->dst = first->dst;
- new->len = first->len;
- }
-
- /* cookie incr and addition to used_list must be atomic */
- cookie = ioat_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- ioat_chan->common.cookie = new->async_tx.cookie = cookie;
-
- /* write address into NextDescriptor field of last desc in chain */
- to_ioat_desc(ioat_chan->used_desc.prev)->hw->next =
- first->async_tx.phys;
- list_splice_tail(&new_chain, &ioat_chan->used_desc);
-
- ioat_chan->dmacount += desc_count;
- ioat_chan->pending += desc_count;
- if (ioat_chan->pending >= ioat_pending_level)
- __ioat1_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- return cookie;
-}
-
-static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(tx->chan);
- struct ioat_desc_sw *first = tx_to_ioat_desc(tx);
- struct ioat_desc_sw *new;
- struct ioat_dma_descriptor *hw;
- dma_cookie_t cookie;
- u32 copy;
- size_t len;
- dma_addr_t src, dst;
- unsigned long orig_flags;
- unsigned int desc_count = 0;
-
- /* src and dest and len are stored in the initial descriptor */
- len = first->len;
- src = first->src;
- dst = first->dst;
- orig_flags = first->async_tx.flags;
- new = first;
-
- /*
- * ioat_chan->desc_lock is still in force in version 2 path
- * it gets unlocked at end of this function
- */
- do {
- copy = min_t(size_t, len, ioat_chan->xfercap);
-
- async_tx_ack(&new->async_tx);
-
- hw = new->hw;
- hw->size = copy;
- hw->ctl = 0;
- hw->src_addr = src;
- hw->dst_addr = dst;
-
- len -= copy;
- dst += copy;
- src += copy;
- desc_count++;
- } while (len && (new = ioat2_dma_get_next_descriptor(ioat_chan)));
-
- if (!new) {
- dev_err(&ioat_chan->device->pdev->dev,
- "tx submit failed\n");
- spin_unlock_bh(&ioat_chan->desc_lock);
- return -ENOMEM;
- }
-
- hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- if (first->async_tx.callback) {
- hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
- if (first != new) {
- /* move callback into to last desc */
- new->async_tx.callback = first->async_tx.callback;
- new->async_tx.callback_param
- = first->async_tx.callback_param;
- first->async_tx.callback = NULL;
- first->async_tx.callback_param = NULL;
- }
- }
-
- new->tx_cnt = desc_count;
- new->async_tx.flags = orig_flags; /* client is in control of this ack */
-
- /* store the original values for use in later cleanup */
- if (new != first) {
- new->src = first->src;
- new->dst = first->dst;
- new->len = first->len;
- }
-
- /* cookie incr and addition to used_list must be atomic */
- cookie = ioat_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- ioat_chan->common.cookie = new->async_tx.cookie = cookie;
-
- ioat_chan->dmacount += desc_count;
- ioat_chan->pending += desc_count;
- if (ioat_chan->pending >= ioat_pending_level)
- __ioat2_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- return cookie;
-}
-
-/**
- * ioat_dma_alloc_descriptor - allocate and return a sw and hw descriptor pair
- * @ioat_chan: the channel supplying the memory pool for the descriptors
- * @flags: allocation flags
- */
-static struct ioat_desc_sw *ioat_dma_alloc_descriptor(
- struct ioat_dma_chan *ioat_chan,
- gfp_t flags)
-{
- struct ioat_dma_descriptor *desc;
- struct ioat_desc_sw *desc_sw;
- struct ioatdma_device *ioatdma_device;
- dma_addr_t phys;
-
- ioatdma_device = to_ioatdma_device(ioat_chan->common.device);
- desc = pci_pool_alloc(ioatdma_device->dma_pool, flags, &phys);
- if (unlikely(!desc))
- return NULL;
-
- desc_sw = kzalloc(sizeof(*desc_sw), flags);
- if (unlikely(!desc_sw)) {
- pci_pool_free(ioatdma_device->dma_pool, desc, phys);
- return NULL;
- }
-
- memset(desc, 0, sizeof(*desc));
- dma_async_tx_descriptor_init(&desc_sw->async_tx, &ioat_chan->common);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- desc_sw->async_tx.tx_submit = ioat1_tx_submit;
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- desc_sw->async_tx.tx_submit = ioat2_tx_submit;
- break;
- }
-
- desc_sw->hw = desc;
- desc_sw->async_tx.phys = phys;
-
- return desc_sw;
-}
-
-static int ioat_initial_desc_count = 256;
-module_param(ioat_initial_desc_count, int, 0644);
-MODULE_PARM_DESC(ioat_initial_desc_count,
- "initial descriptors per channel (default: 256)");
-
-/**
- * ioat2_dma_massage_chan_desc - link the descriptors into a circle
- * @ioat_chan: the channel to be massaged
- */
-static void ioat2_dma_massage_chan_desc(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *desc, *_desc;
-
- /* setup used_desc */
- ioat_chan->used_desc.next = ioat_chan->free_desc.next;
- ioat_chan->used_desc.prev = NULL;
-
- /* pull free_desc out of the circle so that every node is a hw
- * descriptor, but leave it pointing to the list
- */
- ioat_chan->free_desc.prev->next = ioat_chan->free_desc.next;
- ioat_chan->free_desc.next->prev = ioat_chan->free_desc.prev;
-
- /* circle link the hw descriptors */
- desc = to_ioat_desc(ioat_chan->free_desc.next);
- desc->hw->next = to_ioat_desc(desc->node.next)->async_tx.phys;
- list_for_each_entry_safe(desc, _desc, ioat_chan->free_desc.next, node) {
- desc->hw->next = to_ioat_desc(desc->node.next)->async_tx.phys;
- }
-}
-
-/**
- * ioat_dma_alloc_chan_resources - returns the number of allocated descriptors
- * @chan: the channel to be filled out
- */
-static int ioat_dma_alloc_chan_resources(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioat_desc_sw *desc;
- u16 chanctrl;
- u32 chanerr;
- int i;
- LIST_HEAD(tmp_list);
-
- /* have we already been set up? */
- if (!list_empty(&ioat_chan->free_desc))
- return ioat_chan->desccount;
-
- /* Setup register to interrupt and write completion status on error */
- chanctrl = IOAT_CHANCTRL_ERR_INT_EN |
- IOAT_CHANCTRL_ANY_ERR_ABORT_EN |
- IOAT_CHANCTRL_ERR_COMPLETION_EN;
- writew(chanctrl, ioat_chan->reg_base + IOAT_CHANCTRL_OFFSET);
-
- chanerr = readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- if (chanerr) {
- dev_err(&ioat_chan->device->pdev->dev,
- "CHANERR = %x, clearing\n", chanerr);
- writel(chanerr, ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- }
-
- /* Allocate descriptors */
- for (i = 0; i < ioat_initial_desc_count; i++) {
- desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_KERNEL);
- if (!desc) {
- dev_err(&ioat_chan->device->pdev->dev,
- "Only %d initial descriptors\n", i);
- break;
- }
- list_add_tail(&desc->node, &tmp_list);
- }
- spin_lock_bh(&ioat_chan->desc_lock);
- ioat_chan->desccount = i;
- list_splice(&tmp_list, &ioat_chan->free_desc);
- if (ioat_chan->device->version != IOAT_VER_1_2)
- ioat2_dma_massage_chan_desc(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- /* allocate a completion writeback area */
- /* doing 2 32bit writes to mmio since 1 64b write doesn't work */
- ioat_chan->completion_virt =
- pci_pool_alloc(ioat_chan->device->completion_pool,
- GFP_KERNEL,
- &ioat_chan->completion_addr);
- memset(ioat_chan->completion_virt, 0,
- sizeof(*ioat_chan->completion_virt));
- writel(((u64) ioat_chan->completion_addr) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_LOW);
- writel(((u64) ioat_chan->completion_addr) >> 32,
- ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
-
- tasklet_enable(&ioat_chan->cleanup_task);
- ioat_dma_start_null_desc(ioat_chan); /* give chain to dma device */
- return ioat_chan->desccount;
-}
-
-/**
- * ioat_dma_free_chan_resources - release all the descriptors
- * @chan: the channel to be cleaned
- */
-static void ioat_dma_free_chan_resources(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioatdma_device *ioatdma_device = to_ioatdma_device(chan->device);
- struct ioat_desc_sw *desc, *_desc;
- int in_use_descs = 0;
-
- /* Before freeing channel resources first check
- * if they have been previously allocated for this channel.
- */
- if (ioat_chan->desccount == 0)
- return;
-
- tasklet_disable(&ioat_chan->cleanup_task);
- ioat_dma_memcpy_cleanup(ioat_chan);
-
- /* Delay 100ms after reset to allow internal DMA logic to quiesce
- * before removing DMA descriptor resources.
- */
- writeb(IOAT_CHANCMD_RESET,
- ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- mdelay(100);
-
- spin_lock_bh(&ioat_chan->desc_lock);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- list_for_each_entry_safe(desc, _desc,
- &ioat_chan->used_desc, node) {
- in_use_descs++;
- list_del(&desc->node);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- }
- list_for_each_entry_safe(desc, _desc,
- &ioat_chan->free_desc, node) {
- list_del(&desc->node);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- }
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- list_for_each_entry_safe(desc, _desc,
- ioat_chan->free_desc.next, node) {
- list_del(&desc->node);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- }
- desc = to_ioat_desc(ioat_chan->free_desc.next);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- INIT_LIST_HEAD(&ioat_chan->free_desc);
- INIT_LIST_HEAD(&ioat_chan->used_desc);
- break;
- }
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- pci_pool_free(ioatdma_device->completion_pool,
- ioat_chan->completion_virt,
- ioat_chan->completion_addr);
-
- /* one is ok since we left it on there on purpose */
- if (in_use_descs > 1)
- dev_err(&ioat_chan->device->pdev->dev,
- "Freeing %d in use descriptors!\n",
- in_use_descs - 1);
-
- ioat_chan->last_completion = ioat_chan->completion_addr = 0;
- ioat_chan->pending = 0;
- ioat_chan->dmacount = 0;
- ioat_chan->desccount = 0;
- ioat_chan->watchdog_completion = 0;
- ioat_chan->last_compl_desc_addr_hw = 0;
- ioat_chan->watchdog_tcp_cookie =
- ioat_chan->watchdog_last_tcp_cookie = 0;
-}
-
-/**
- * ioat_dma_get_next_descriptor - return the next available descriptor
- * @ioat_chan: IOAT DMA channel handle
- *
- * Gets the next descriptor from the chain, and must be called with the
- * channel's desc_lock held. Allocates more descriptors if the channel
- * has run out.
- */
-static struct ioat_desc_sw *
-ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *new;
-
- if (!list_empty(&ioat_chan->free_desc)) {
- new = to_ioat_desc(ioat_chan->free_desc.next);
- list_del(&new->node);
- } else {
- /* try to get another desc */
- new = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC);
- if (!new) {
- dev_err(&ioat_chan->device->pdev->dev,
- "alloc failed\n");
- return NULL;
- }
- }
-
- prefetch(new->hw);
- return new;
-}
-
-static struct ioat_desc_sw *
-ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *new;
-
- /*
- * used.prev points to where to start processing
- * used.next points to next free descriptor
- * if used.prev == NULL, there are none waiting to be processed
- * if used.next == used.prev.prev, there is only one free descriptor,
- * and we need to use it to as a noop descriptor before
- * linking in a new set of descriptors, since the device
- * has probably already read the pointer to it
- */
- if (ioat_chan->used_desc.prev &&
- ioat_chan->used_desc.next == ioat_chan->used_desc.prev->prev) {
-
- struct ioat_desc_sw *desc;
- struct ioat_desc_sw *noop_desc;
- int i;
-
- /* set up the noop descriptor */
- noop_desc = to_ioat_desc(ioat_chan->used_desc.next);
- /* set size to non-zero value (channel returns error when size is 0) */
- noop_desc->hw->size = NULL_DESC_BUFFER_SIZE;
- noop_desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL;
- noop_desc->hw->src_addr = 0;
- noop_desc->hw->dst_addr = 0;
-
- ioat_chan->used_desc.next = ioat_chan->used_desc.next->next;
- ioat_chan->pending++;
- ioat_chan->dmacount++;
-
- /* try to get a few more descriptors */
- for (i = 16; i; i--) {
- desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC);
- if (!desc) {
- dev_err(&ioat_chan->device->pdev->dev,
- "alloc failed\n");
- break;
- }
- list_add_tail(&desc->node, ioat_chan->used_desc.next);
-
- desc->hw->next
- = to_ioat_desc(desc->node.next)->async_tx.phys;
- to_ioat_desc(desc->node.prev)->hw->next
- = desc->async_tx.phys;
- ioat_chan->desccount++;
- }
-
- ioat_chan->used_desc.next = noop_desc->node.next;
- }
- new = to_ioat_desc(ioat_chan->used_desc.next);
- prefetch(new);
- ioat_chan->used_desc.next = new->node.next;
-
- if (ioat_chan->used_desc.prev == NULL)
- ioat_chan->used_desc.prev = &new->node;
-
- prefetch(new->hw);
- return new;
-}
-
-static struct ioat_desc_sw *ioat_dma_get_next_descriptor(
- struct ioat_dma_chan *ioat_chan)
-{
- if (!ioat_chan)
- return NULL;
-
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- return ioat1_dma_get_next_descriptor(ioat_chan);
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- return ioat2_dma_get_next_descriptor(ioat_chan);
- }
- return NULL;
-}
-
-static struct dma_async_tx_descriptor *ioat1_dma_prep_memcpy(
- struct dma_chan *chan,
- dma_addr_t dma_dest,
- dma_addr_t dma_src,
- size_t len,
- unsigned long flags)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioat_desc_sw *new;
-
- spin_lock_bh(&ioat_chan->desc_lock);
- new = ioat_dma_get_next_descriptor(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- if (new) {
- new->len = len;
- new->dst = dma_dest;
- new->src = dma_src;
- new->async_tx.flags = flags;
- return &new->async_tx;
- } else {
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d - get_next_desc failed: %d descs waiting, %d total desc\n",
- chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
- return NULL;
- }
-}
-
-static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy(
- struct dma_chan *chan,
- dma_addr_t dma_dest,
- dma_addr_t dma_src,
- size_t len,
- unsigned long flags)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioat_desc_sw *new;
-
- spin_lock_bh(&ioat_chan->desc_lock);
- new = ioat2_dma_get_next_descriptor(ioat_chan);
-
- /*
- * leave ioat_chan->desc_lock set in ioat 2 path
- * it will get unlocked at end of tx_submit
- */
-
- if (new) {
- new->len = len;
- new->dst = dma_dest;
- new->src = dma_src;
- new->async_tx.flags = flags;
- return &new->async_tx;
- } else {
- spin_unlock_bh(&ioat_chan->desc_lock);
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d - get_next_desc failed: %d descs waiting, %d total desc\n",
- chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
- return NULL;
- }
-}
-
-static void ioat_dma_cleanup_tasklet(unsigned long data)
-{
- struct ioat_dma_chan *chan = (void *)data;
- ioat_dma_memcpy_cleanup(chan);
- writew(IOAT_CHANCTRL_INT_DISABLE,
- chan->reg_base + IOAT_CHANCTRL_OFFSET);
-}
-
-static void
-ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
-{
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
- pci_unmap_single(ioat_chan->device->pdev,
- pci_unmap_addr(desc, dst),
- pci_unmap_len(desc, len),
- PCI_DMA_FROMDEVICE);
- else
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, dst),
- pci_unmap_len(desc, len),
- PCI_DMA_FROMDEVICE);
- }
-
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
- pci_unmap_single(ioat_chan->device->pdev,
- pci_unmap_addr(desc, src),
- pci_unmap_len(desc, len),
- PCI_DMA_TODEVICE);
- else
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, src),
- pci_unmap_len(desc, len),
- PCI_DMA_TODEVICE);
- }
-}
-
-/**
- * ioat_dma_memcpy_cleanup - cleanup up finished descriptors
- * @chan: ioat channel to be cleaned up
- */
-static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
-{
- unsigned long phys_complete;
- struct ioat_desc_sw *desc, *_desc;
- dma_cookie_t cookie = 0;
- unsigned long desc_phys;
- struct ioat_desc_sw *latest_desc;
-
- prefetch(ioat_chan->completion_virt);
-
- if (!spin_trylock_bh(&ioat_chan->cleanup_lock))
- return;
-
- /* The completion writeback can happen at any time,
- so reads by the driver need to be atomic operations
- The descriptor physical addresses are limited to 32-bits
- when the CPU can only do a 32-bit mov */
-
-#if (BITS_PER_LONG == 64)
- phys_complete =
- ioat_chan->completion_virt->full
- & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
-#else
- phys_complete =
- ioat_chan->completion_virt->low & IOAT_LOW_COMPLETION_MASK;
-#endif
-
- if ((ioat_chan->completion_virt->full
- & IOAT_CHANSTS_DMA_TRANSFER_STATUS) ==
- IOAT_CHANSTS_DMA_TRANSFER_STATUS_HALTED) {
- dev_err(&ioat_chan->device->pdev->dev,
- "Channel halted, chanerr = %x\n",
- readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET));
-
- /* TODO do something to salvage the situation */
- }
-
- if (phys_complete == ioat_chan->last_completion) {
- spin_unlock_bh(&ioat_chan->cleanup_lock);
- /*
- * perhaps we're stuck so hard that the watchdog can't go off?
- * try to catch it after 2 seconds
- */
- if (ioat_chan->device->version != IOAT_VER_3_0) {
- if (time_after(jiffies,
- ioat_chan->last_completion_time + HZ*WATCHDOG_DELAY)) {
- ioat_dma_chan_watchdog(&(ioat_chan->device->work.work));
- ioat_chan->last_completion_time = jiffies;
- }
- }
- return;
- }
- ioat_chan->last_completion_time = jiffies;
-
- cookie = 0;
- if (!spin_trylock_bh(&ioat_chan->desc_lock)) {
- spin_unlock_bh(&ioat_chan->cleanup_lock);
- return;
- }
-
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- list_for_each_entry_safe(desc, _desc,
- &ioat_chan->used_desc, node) {
-
- /*
- * Incoming DMA requests may use multiple descriptors,
- * due to exceeding xfercap, perhaps. If so, only the
- * last one will have a cookie, and require unmapping.
- */
- if (desc->async_tx.cookie) {
- cookie = desc->async_tx.cookie;
- ioat_dma_unmap(ioat_chan, desc);
- if (desc->async_tx.callback) {
- desc->async_tx.callback(desc->async_tx.callback_param);
- desc->async_tx.callback = NULL;
- }
- }
-
- if (desc->async_tx.phys != phys_complete) {
- /*
- * a completed entry, but not the last, so clean
- * up if the client is done with the descriptor
- */
- if (async_tx_test_ack(&desc->async_tx)) {
- list_move_tail(&desc->node,
- &ioat_chan->free_desc);
- } else
- desc->async_tx.cookie = 0;
- } else {
- /*
- * last used desc. Do not remove, so we can
- * append from it, but don't look at it next
- * time, either
- */
- desc->async_tx.cookie = 0;
-
- /* TODO check status bits? */
- break;
- }
- }
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- /* has some other thread has already cleaned up? */
- if (ioat_chan->used_desc.prev == NULL)
- break;
-
- /* work backwards to find latest finished desc */
- desc = to_ioat_desc(ioat_chan->used_desc.next);
- latest_desc = NULL;
- do {
- desc = to_ioat_desc(desc->node.prev);
- desc_phys = (unsigned long)desc->async_tx.phys
- & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
- if (desc_phys == phys_complete) {
- latest_desc = desc;
- break;
- }
- } while (&desc->node != ioat_chan->used_desc.prev);
-
- if (latest_desc != NULL) {
-
- /* work forwards to clear finished descriptors */
- for (desc = to_ioat_desc(ioat_chan->used_desc.prev);
- &desc->node != latest_desc->node.next &&
- &desc->node != ioat_chan->used_desc.next;
- desc = to_ioat_desc(desc->node.next)) {
- if (desc->async_tx.cookie) {
- cookie = desc->async_tx.cookie;
- desc->async_tx.cookie = 0;
- ioat_dma_unmap(ioat_chan, desc);
- if (desc->async_tx.callback) {
- desc->async_tx.callback(desc->async_tx.callback_param);
- desc->async_tx.callback = NULL;
- }
- }
- }
-
- /* move used.prev up beyond those that are finished */
- if (&desc->node == ioat_chan->used_desc.next)
- ioat_chan->used_desc.prev = NULL;
- else
- ioat_chan->used_desc.prev = &desc->node;
- }
- break;
- }
-
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- ioat_chan->last_completion = phys_complete;
- if (cookie != 0)
- ioat_chan->completed_cookie = cookie;
-
- spin_unlock_bh(&ioat_chan->cleanup_lock);
-}
-
-/**
- * ioat_dma_is_complete - poll the status of a IOAT DMA transaction
- * @chan: IOAT DMA channel handle
- * @cookie: DMA transaction identifier
- * @done: if not %NULL, updated with last completed transaction
- * @used: if not %NULL, updated with last used transaction
- */
-static enum dma_status ioat_dma_is_complete(struct dma_chan *chan,
- dma_cookie_t cookie,
- dma_cookie_t *done,
- dma_cookie_t *used)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- dma_cookie_t last_used;
- dma_cookie_t last_complete;
- enum dma_status ret;
-
- last_used = chan->cookie;
- last_complete = ioat_chan->completed_cookie;
- ioat_chan->watchdog_tcp_cookie = cookie;
-
- if (done)
- *done = last_complete;
- if (used)
- *used = last_used;
-
- ret = dma_async_is_complete(cookie, last_complete, last_used);
- if (ret == DMA_SUCCESS)
- return ret;
-
- ioat_dma_memcpy_cleanup(ioat_chan);
-
- last_used = chan->cookie;
- last_complete = ioat_chan->completed_cookie;
-
- if (done)
- *done = last_complete;
- if (used)
- *used = last_used;
-
- return dma_async_is_complete(cookie, last_complete, last_used);
-}
-
-static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *desc;
-
- spin_lock_bh(&ioat_chan->desc_lock);
-
- desc = ioat_dma_get_next_descriptor(ioat_chan);
-
- if (!desc) {
- dev_err(&ioat_chan->device->pdev->dev,
- "Unable to start null desc - get next desc failed\n");
- spin_unlock_bh(&ioat_chan->desc_lock);
- return;
- }
-
- desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL
- | IOAT_DMA_DESCRIPTOR_CTL_INT_GN
- | IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- /* set size to non-zero value (channel returns error when size is 0) */
- desc->hw->size = NULL_DESC_BUFFER_SIZE;
- desc->hw->src_addr = 0;
- desc->hw->dst_addr = 0;
- async_tx_ack(&desc->async_tx);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- desc->hw->next = 0;
- list_add_tail(&desc->node, &ioat_chan->used_desc);
-
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
-
- writeb(IOAT_CHANCMD_START, ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
-
- ioat_chan->dmacount++;
- __ioat2_dma_memcpy_issue_pending(ioat_chan);
- break;
- }
- spin_unlock_bh(&ioat_chan->desc_lock);
-}
-
-/*
- * Perform a IOAT transaction to verify the HW works.
- */
-#define IOAT_TEST_SIZE 2000
-
-static void ioat_dma_test_callback(void *dma_async_param)
-{
- struct completion *cmp = dma_async_param;
-
- complete(cmp);
-}
-
-/**
- * ioat_dma_self_test - Perform a IOAT transaction to verify the HW works.
- * @device: device to be tested
- */
-static int ioat_dma_self_test(struct ioatdma_device *device)
-{
- int i;
- u8 *src;
- u8 *dest;
- struct dma_chan *dma_chan;
- struct dma_async_tx_descriptor *tx;
- dma_addr_t dma_dest, dma_src;
- dma_cookie_t cookie;
- int err = 0;
- struct completion cmp;
- unsigned long tmo;
- unsigned long flags;
-
- src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
- if (!src)
- return -ENOMEM;
- dest = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
- if (!dest) {
- kfree(src);
- return -ENOMEM;
- }
-
- /* Fill in src buffer */
- for (i = 0; i < IOAT_TEST_SIZE; i++)
- src[i] = (u8)i;
-
- /* Start copy, using first DMA channel */
- dma_chan = container_of(device->common.channels.next,
- struct dma_chan,
- device_node);
- if (device->common.device_alloc_chan_resources(dma_chan) < 1) {
- dev_err(&device->pdev->dev,
- "selftest cannot allocate chan resource\n");
- err = -ENODEV;
- goto out;
- }
-
- dma_src = dma_map_single(dma_chan->device->dev, src, IOAT_TEST_SIZE,
- DMA_TO_DEVICE);
- dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
- DMA_FROM_DEVICE);
- flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE;
- tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
- IOAT_TEST_SIZE, flags);
- if (!tx) {
- dev_err(&device->pdev->dev,
- "Self-test prep failed, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
-
- async_tx_ack(tx);
- init_completion(&cmp);
- tx->callback = ioat_dma_test_callback;
- tx->callback_param = &cmp;
- cookie = tx->tx_submit(tx);
- if (cookie < 0) {
- dev_err(&device->pdev->dev,
- "Self-test setup failed, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
- device->common.device_issue_pending(dma_chan);
-
- tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
-
- if (tmo == 0 ||
- device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
- != DMA_SUCCESS) {
- dev_err(&device->pdev->dev,
- "Self-test copy timed out, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
- if (memcmp(src, dest, IOAT_TEST_SIZE)) {
- dev_err(&device->pdev->dev,
- "Self-test copy failed compare, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
-
-free_resources:
- device->common.device_free_chan_resources(dma_chan);
-out:
- kfree(src);
- kfree(dest);
- return err;
-}
-
-static char ioat_interrupt_style[32] = "msix";
-module_param_string(ioat_interrupt_style, ioat_interrupt_style,
- sizeof(ioat_interrupt_style), 0644);
-MODULE_PARM_DESC(ioat_interrupt_style,
- "set ioat interrupt style: msix (default), "
- "msix-single-vector, msi, intx)");
-
-/**
- * ioat_dma_setup_interrupts - setup interrupt handler
- * @device: ioat device
- */
-static int ioat_dma_setup_interrupts(struct ioatdma_device *device)
-{
- struct ioat_dma_chan *ioat_chan;
- int err, i, j, msixcnt;
- u8 intrctrl = 0;
-
- if (!strcmp(ioat_interrupt_style, "msix"))
- goto msix;
- if (!strcmp(ioat_interrupt_style, "msix-single-vector"))
- goto msix_single_vector;
- if (!strcmp(ioat_interrupt_style, "msi"))
- goto msi;
- if (!strcmp(ioat_interrupt_style, "intx"))
- goto intx;
- dev_err(&device->pdev->dev, "invalid ioat_interrupt_style %s\n",
- ioat_interrupt_style);
- goto err_no_irq;
-
-msix:
- /* The number of MSI-X vectors should equal the number of channels */
- msixcnt = device->common.chancnt;
- for (i = 0; i < msixcnt; i++)
- device->msix_entries[i].entry = i;
-
- err = pci_enable_msix(device->pdev, device->msix_entries, msixcnt);
- if (err < 0)
- goto msi;
- if (err > 0)
- goto msix_single_vector;
-
- for (i = 0; i < msixcnt; i++) {
- ioat_chan = ioat_lookup_chan_by_index(device, i);
- err = request_irq(device->msix_entries[i].vector,
- ioat_dma_do_interrupt_msix,
- 0, "ioat-msix", ioat_chan);
- if (err) {
- for (j = 0; j < i; j++) {
- ioat_chan =
- ioat_lookup_chan_by_index(device, j);
- free_irq(device->msix_entries[j].vector,
- ioat_chan);
- }
- goto msix_single_vector;
- }
- }
- intrctrl |= IOAT_INTRCTRL_MSIX_VECTOR_CONTROL;
- device->irq_mode = msix_multi_vector;
- goto done;
-
-msix_single_vector:
- device->msix_entries[0].entry = 0;
- err = pci_enable_msix(device->pdev, device->msix_entries, 1);
- if (err)
- goto msi;
-
- err = request_irq(device->msix_entries[0].vector, ioat_dma_do_interrupt,
- 0, "ioat-msix", device);
- if (err) {
- pci_disable_msix(device->pdev);
- goto msi;
- }
- device->irq_mode = msix_single_vector;
- goto done;
-
-msi:
- err = pci_enable_msi(device->pdev);
- if (err)
- goto intx;
-
- err = request_irq(device->pdev->irq, ioat_dma_do_interrupt,
- 0, "ioat-msi", device);
- if (err) {
- pci_disable_msi(device->pdev);
- goto intx;
- }
- /*
- * CB 1.2 devices need a bit set in configuration space to enable MSI
- */
- if (device->version == IOAT_VER_1_2) {
- u32 dmactrl;
- pci_read_config_dword(device->pdev,
- IOAT_PCI_DMACTRL_OFFSET, &dmactrl);
- dmactrl |= IOAT_PCI_DMACTRL_MSI_EN;
- pci_write_config_dword(device->pdev,
- IOAT_PCI_DMACTRL_OFFSET, dmactrl);
- }
- device->irq_mode = msi;
- goto done;
-
-intx:
- err = request_irq(device->pdev->irq, ioat_dma_do_interrupt,
- IRQF_SHARED, "ioat-intx", device);
- if (err)
- goto err_no_irq;
- device->irq_mode = intx;
-
-done:
- intrctrl |= IOAT_INTRCTRL_MASTER_INT_EN;
- writeb(intrctrl, device->reg_base + IOAT_INTRCTRL_OFFSET);
- return 0;
-
-err_no_irq:
- /* Disable all interrupt generation */
- writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
- dev_err(&device->pdev->dev, "no usable interrupts\n");
- device->irq_mode = none;
- return -1;
-}
-
-/**
- * ioat_dma_remove_interrupts - remove whatever interrupts were set
- * @device: ioat device
- */
-static void ioat_dma_remove_interrupts(struct ioatdma_device *device)
-{
- struct ioat_dma_chan *ioat_chan;
- int i;
-
- /* Disable all interrupt generation */
- writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
-
- switch (device->irq_mode) {
- case msix_multi_vector:
- for (i = 0; i < device->common.chancnt; i++) {
- ioat_chan = ioat_lookup_chan_by_index(device, i);
- free_irq(device->msix_entries[i].vector, ioat_chan);
- }
- pci_disable_msix(device->pdev);
- break;
- case msix_single_vector:
- free_irq(device->msix_entries[0].vector, device);
- pci_disable_msix(device->pdev);
- break;
- case msi:
- free_irq(device->pdev->irq, device);
- pci_disable_msi(device->pdev);
- break;
- case intx:
- free_irq(device->pdev->irq, device);
- break;
- case none:
- dev_warn(&device->pdev->dev,
- "call to %s without interrupts setup\n", __func__);
- }
- device->irq_mode = none;
-}
-
-struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
- void __iomem *iobase)
-{
- int err;
- struct ioatdma_device *device;
-
- device = kzalloc(sizeof(*device), GFP_KERNEL);
- if (!device) {
- err = -ENOMEM;
- goto err_kzalloc;
- }
- device->pdev = pdev;
- device->reg_base = iobase;
- device->version = readb(device->reg_base + IOAT_VER_OFFSET);
-
- /* DMA coherent memory pool for DMA descriptor allocations */
- device->dma_pool = pci_pool_create("dma_desc_pool", pdev,
- sizeof(struct ioat_dma_descriptor),
- 64, 0);
- if (!device->dma_pool) {
- err = -ENOMEM;
- goto err_dma_pool;
- }
-
- device->completion_pool = pci_pool_create("completion_pool", pdev,
- sizeof(u64), SMP_CACHE_BYTES,
- SMP_CACHE_BYTES);
- if (!device->completion_pool) {
- err = -ENOMEM;
- goto err_completion_pool;
- }
-
- INIT_LIST_HEAD(&device->common.channels);
- ioat_dma_enumerate_channels(device);
-
- device->common.device_alloc_chan_resources =
- ioat_dma_alloc_chan_resources;
- device->common.device_free_chan_resources =
- ioat_dma_free_chan_resources;
- device->common.dev = &pdev->dev;
-
- dma_cap_set(DMA_MEMCPY, device->common.cap_mask);
- device->common.device_is_tx_complete = ioat_dma_is_complete;
- switch (device->version) {
- case IOAT_VER_1_2:
- device->common.device_prep_dma_memcpy = ioat1_dma_prep_memcpy;
- device->common.device_issue_pending =
- ioat1_dma_memcpy_issue_pending;
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- device->common.device_prep_dma_memcpy = ioat2_dma_prep_memcpy;
- device->common.device_issue_pending =
- ioat2_dma_memcpy_issue_pending;
- break;
- }
-
- dev_err(&device->pdev->dev,
- "Intel(R) I/OAT DMA Engine found,"
- " %d channels, device version 0x%02x, driver version %s\n",
- device->common.chancnt, device->version, IOAT_DMA_VERSION);
-
- if (!device->common.chancnt) {
- dev_err(&device->pdev->dev,
- "Intel(R) I/OAT DMA Engine problem found: "
- "zero channels detected\n");
- goto err_setup_interrupts;
- }
-
- err = ioat_dma_setup_interrupts(device);
- if (err)
- goto err_setup_interrupts;
-
- err = ioat_dma_self_test(device);
- if (err)
- goto err_self_test;
-
- ioat_set_tcp_copy_break(device);
-
- dma_async_device_register(&device->common);
-
- if (device->version != IOAT_VER_3_0) {
- INIT_DELAYED_WORK(&device->work, ioat_dma_chan_watchdog);
- schedule_delayed_work(&device->work,
- WATCHDOG_DELAY);
- }
-
- return device;
-
-err_self_test:
- ioat_dma_remove_interrupts(device);
-err_setup_interrupts:
- pci_pool_destroy(device->completion_pool);
-err_completion_pool:
- pci_pool_destroy(device->dma_pool);
-err_dma_pool:
- kfree(device);
-err_kzalloc:
- dev_err(&pdev->dev,
- "Intel(R) I/OAT DMA Engine initialization failed\n");
- return NULL;
-}
-
-void ioat_dma_remove(struct ioatdma_device *device)
-{
- struct dma_chan *chan, *_chan;
- struct ioat_dma_chan *ioat_chan;
-
- if (device->version != IOAT_VER_3_0)
- cancel_delayed_work(&device->work);
-
- ioat_dma_remove_interrupts(device);
-
- dma_async_device_unregister(&device->common);
-
- pci_pool_destroy(device->dma_pool);
- pci_pool_destroy(device->completion_pool);
-
- iounmap(device->reg_base);
- pci_release_regions(device->pdev);
- pci_disable_device(device->pdev);
-
- list_for_each_entry_safe(chan, _chan,
- &device->common.channels, device_node) {
- ioat_chan = to_ioat_chan(chan);
- list_del(&chan->device_node);
- kfree(ioat_chan);
- }
- kfree(device);
-}
-
+++ /dev/null
-/*
- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef IOATDMA_H
-#define IOATDMA_H
-
-#include <linux/dmaengine.h>
-#include "ioatdma_hw.h"
-#include <linux/init.h>
-#include <linux/dmapool.h>
-#include <linux/cache.h>
-#include <linux/pci_ids.h>
-#include <net/tcp.h>
-
-#define IOAT_DMA_VERSION "3.64"
-
-enum ioat_interrupt {
- none = 0,
- msix_multi_vector = 1,
- msix_single_vector = 2,
- msi = 3,
- intx = 4,
-};
-
-#define IOAT_LOW_COMPLETION_MASK 0xffffffc0
-#define IOAT_DMA_DCA_ANY_CPU ~0
-#define IOAT_WATCHDOG_PERIOD (2 * HZ)
-
-
-/**
- * struct ioatdma_device - internal representation of a IOAT device
- * @pdev: PCI-Express device
- * @reg_base: MMIO register space base address
- * @dma_pool: for allocating DMA descriptors
- * @common: embedded struct dma_device
- * @version: version of ioatdma device
- * @irq_mode: which style irq to use
- * @msix_entries: irq handlers
- * @idx: per channel data
- */
-
-struct ioatdma_device {
- struct pci_dev *pdev;
- void __iomem *reg_base;
- struct pci_pool *dma_pool;
- struct pci_pool *completion_pool;
- struct dma_device common;
- u8 version;
- enum ioat_interrupt irq_mode;
- struct delayed_work work;
- struct msix_entry msix_entries[4];
- struct ioat_dma_chan *idx[4];
-};
-
-/**
- * struct ioat_dma_chan - internal representation of a DMA channel
- */
-struct ioat_dma_chan {
-
- void __iomem *reg_base;
-
- dma_cookie_t completed_cookie;
- unsigned long last_completion;
- unsigned long last_completion_time;
-
- size_t xfercap; /* XFERCAP register value expanded out */
-
- spinlock_t cleanup_lock;
- spinlock_t desc_lock;
- struct list_head free_desc;
- struct list_head used_desc;
- unsigned long watchdog_completion;
- int watchdog_tcp_cookie;
- u32 watchdog_last_tcp_cookie;
- struct delayed_work work;
-
- int pending;
- int dmacount;
- int desccount;
-
- struct ioatdma_device *device;
- struct dma_chan common;
-
- dma_addr_t completion_addr;
- union {
- u64 full; /* HW completion writeback */
- struct {
- u32 low;
- u32 high;
- };
- } *completion_virt;
- unsigned long last_compl_desc_addr_hw;
- struct tasklet_struct cleanup_task;
-};
-
-/* wrapper around hardware descriptor format + additional software fields */
-
-/**
- * struct ioat_desc_sw - wrapper around hardware descriptor
- * @hw: hardware DMA descriptor
- * @node: this descriptor will either be on the free list,
- * or attached to a transaction list (async_tx.tx_list)
- * @tx_cnt: number of descriptors required to complete the transaction
- * @async_tx: the generic software descriptor for all engines
- */
-struct ioat_desc_sw {
- struct ioat_dma_descriptor *hw;
- struct list_head node;
- int tx_cnt;
- size_t len;
- dma_addr_t src;
- dma_addr_t dst;
- struct dma_async_tx_descriptor async_tx;
-};
-
-static inline void ioat_set_tcp_copy_break(struct ioatdma_device *dev)
-{
- #ifdef CONFIG_NET_DMA
- switch (dev->version) {
- case IOAT_VER_1_2:
- sysctl_tcp_dma_copybreak = 4096;
- break;
- case IOAT_VER_2_0:
- sysctl_tcp_dma_copybreak = 2048;
- break;
- case IOAT_VER_3_0:
- sysctl_tcp_dma_copybreak = 262144;
- break;
- }
- #endif
-}
-
-#if defined(CONFIG_INTEL_IOATDMA) || defined(CONFIG_INTEL_IOATDMA_MODULE)
-struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
- void __iomem *iobase);
-void ioat_dma_remove(struct ioatdma_device *device);
-struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase);
-struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase);
-struct dca_provider *ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase);
-#else
-#define ioat_dma_probe(pdev, iobase) NULL
-#define ioat_dma_remove(device) do { } while (0)
-#define ioat_dca_init(pdev, iobase) NULL
-#define ioat2_dca_init(pdev, iobase) NULL
-#define ioat3_dca_init(pdev, iobase) NULL
-#endif
-
-#endif /* IOATDMA_H */
+++ /dev/null
-/*
- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef _IOAT_HW_H_
-#define _IOAT_HW_H_
-
-/* PCI Configuration Space Values */
-#define IOAT_PCI_VID 0x8086
-
-/* CB device ID's */
-#define IOAT_PCI_DID_5000 0x1A38
-#define IOAT_PCI_DID_CNB 0x360B
-#define IOAT_PCI_DID_SCNB 0x65FF
-#define IOAT_PCI_DID_SNB 0x402F
-
-#define IOAT_PCI_RID 0x00
-#define IOAT_PCI_SVID 0x8086
-#define IOAT_PCI_SID 0x8086
-#define IOAT_VER_1_2 0x12 /* Version 1.2 */
-#define IOAT_VER_2_0 0x20 /* Version 2.0 */
-#define IOAT_VER_3_0 0x30 /* Version 3.0 */
-
-struct ioat_dma_descriptor {
- uint32_t size;
- uint32_t ctl;
- uint64_t src_addr;
- uint64_t dst_addr;
- uint64_t next;
- uint64_t rsv1;
- uint64_t rsv2;
- uint64_t user1;
- uint64_t user2;
-};
-
-#define IOAT_DMA_DESCRIPTOR_CTL_INT_GN 0x00000001
-#define IOAT_DMA_DESCRIPTOR_CTL_SRC_SN 0x00000002
-#define IOAT_DMA_DESCRIPTOR_CTL_DST_SN 0x00000004
-#define IOAT_DMA_DESCRIPTOR_CTL_CP_STS 0x00000008
-#define IOAT_DMA_DESCRIPTOR_CTL_FRAME 0x00000010
-#define IOAT_DMA_DESCRIPTOR_NUL 0x00000020
-#define IOAT_DMA_DESCRIPTOR_CTL_SP_BRK 0x00000040
-#define IOAT_DMA_DESCRIPTOR_CTL_DP_BRK 0x00000080
-#define IOAT_DMA_DESCRIPTOR_CTL_BNDL 0x00000100
-#define IOAT_DMA_DESCRIPTOR_CTL_DCA 0x00000200
-#define IOAT_DMA_DESCRIPTOR_CTL_BUFHINT 0x00000400
-
-#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_CONTEXT 0xFF000000
-#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_DMA 0x00000000
-
-#define IOAT_DMA_DESCRIPTOR_CTL_CONTEXT_DCA 0x00000001
-#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_MASK 0xFF000000
-
-#endif
+++ /dev/null
-/*
- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef _IOAT_REGISTERS_H_
-#define _IOAT_REGISTERS_H_
-
-#define IOAT_PCI_DMACTRL_OFFSET 0x48
-#define IOAT_PCI_DMACTRL_DMA_EN 0x00000001
-#define IOAT_PCI_DMACTRL_MSI_EN 0x00000002
-
-#define IOAT_PCI_DEVICE_ID_OFFSET 0x02
-#define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148
-#define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184
-
-/* MMIO Device Registers */
-#define IOAT_CHANCNT_OFFSET 0x00 /* 8-bit */
-
-#define IOAT_XFERCAP_OFFSET 0x01 /* 8-bit */
-#define IOAT_XFERCAP_4KB 12
-#define IOAT_XFERCAP_8KB 13
-#define IOAT_XFERCAP_16KB 14
-#define IOAT_XFERCAP_32KB 15
-#define IOAT_XFERCAP_32GB 0
-
-#define IOAT_GENCTRL_OFFSET 0x02 /* 8-bit */
-#define IOAT_GENCTRL_DEBUG_EN 0x01
-
-#define IOAT_INTRCTRL_OFFSET 0x03 /* 8-bit */
-#define IOAT_INTRCTRL_MASTER_INT_EN 0x01 /* Master Interrupt Enable */
-#define IOAT_INTRCTRL_INT_STATUS 0x02 /* ATTNSTATUS -or- Channel Int */
-#define IOAT_INTRCTRL_INT 0x04 /* INT_STATUS -and- MASTER_INT_EN */
-#define IOAT_INTRCTRL_MSIX_VECTOR_CONTROL 0x08 /* Enable all MSI-X vectors */
-
-#define IOAT_ATTNSTATUS_OFFSET 0x04 /* Each bit is a channel */
-
-#define IOAT_VER_OFFSET 0x08 /* 8-bit */
-#define IOAT_VER_MAJOR_MASK 0xF0
-#define IOAT_VER_MINOR_MASK 0x0F
-#define GET_IOAT_VER_MAJOR(x) (((x) & IOAT_VER_MAJOR_MASK) >> 4)
-#define GET_IOAT_VER_MINOR(x) ((x) & IOAT_VER_MINOR_MASK)
-
-#define IOAT_PERPORTOFFSET_OFFSET 0x0A /* 16-bit */
-
-#define IOAT_INTRDELAY_OFFSET 0x0C /* 16-bit */
-#define IOAT_INTRDELAY_INT_DELAY_MASK 0x3FFF /* Interrupt Delay Time */
-#define IOAT_INTRDELAY_COALESE_SUPPORT 0x8000 /* Interrupt Coalescing Supported */
-
-#define IOAT_DEVICE_STATUS_OFFSET 0x0E /* 16-bit */
-#define IOAT_DEVICE_STATUS_DEGRADED_MODE 0x0001
-
-#define IOAT_CHANNEL_MMIO_SIZE 0x80 /* Each Channel MMIO space is this size */
-
-/* DMA Channel Registers */
-#define IOAT_CHANCTRL_OFFSET 0x00 /* 16-bit Channel Control Register */
-#define IOAT_CHANCTRL_CHANNEL_PRIORITY_MASK 0xF000
-#define IOAT_CHANCTRL_CHANNEL_IN_USE 0x0100
-#define IOAT_CHANCTRL_DESCRIPTOR_ADDR_SNOOP_CONTROL 0x0020
-#define IOAT_CHANCTRL_ERR_INT_EN 0x0010
-#define IOAT_CHANCTRL_ANY_ERR_ABORT_EN 0x0008
-#define IOAT_CHANCTRL_ERR_COMPLETION_EN 0x0004
-#define IOAT_CHANCTRL_INT_DISABLE 0x0001
-
-#define IOAT_DMA_COMP_OFFSET 0x02 /* 16-bit DMA channel compatibility */
-#define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with DMA version 1 */
-#define IOAT_DMA_COMP_V2 0x0002 /* Compatibility with DMA version 2 */
-
-
-#define IOAT1_CHANSTS_OFFSET 0x04 /* 64-bit Channel Status Register */
-#define IOAT2_CHANSTS_OFFSET 0x08 /* 64-bit Channel Status Register */
-#define IOAT_CHANSTS_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANSTS_OFFSET : IOAT2_CHANSTS_OFFSET)
-#define IOAT1_CHANSTS_OFFSET_LOW 0x04
-#define IOAT2_CHANSTS_OFFSET_LOW 0x08
-#define IOAT_CHANSTS_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANSTS_OFFSET_LOW : IOAT2_CHANSTS_OFFSET_LOW)
-#define IOAT1_CHANSTS_OFFSET_HIGH 0x08
-#define IOAT2_CHANSTS_OFFSET_HIGH 0x0C
-#define IOAT_CHANSTS_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANSTS_OFFSET_HIGH : IOAT2_CHANSTS_OFFSET_HIGH)
-#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR ~0x3F
-#define IOAT_CHANSTS_SOFT_ERR 0x0000000000000010
-#define IOAT_CHANSTS_UNAFFILIATED_ERR 0x0000000000000008
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS 0x0000000000000007
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE 0x0
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE 0x1
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_SUSPENDED 0x2
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_HALTED 0x3
-
-
-
-#define IOAT_CHAN_DMACOUNT_OFFSET 0x06 /* 16-bit DMA Count register */
-
-#define IOAT_DCACTRL_OFFSET 0x30 /* 32 bit Direct Cache Access Control Register */
-#define IOAT_DCACTRL_CMPL_WRITE_ENABLE 0x10000
-#define IOAT_DCACTRL_TARGET_CPU_MASK 0xFFFF /* APIC ID */
-
-/* CB DCA Memory Space Registers */
-#define IOAT_DCAOFFSET_OFFSET 0x14
-/* CB_BAR + IOAT_DCAOFFSET value */
-#define IOAT_DCA_VER_OFFSET 0x00
-#define IOAT_DCA_VER_MAJOR_MASK 0xF0
-#define IOAT_DCA_VER_MINOR_MASK 0x0F
-
-#define IOAT_DCA_COMP_OFFSET 0x02
-#define IOAT_DCA_COMP_V1 0x1
-
-#define IOAT_FSB_CAPABILITY_OFFSET 0x04
-#define IOAT_FSB_CAPABILITY_PREFETCH 0x1
-
-#define IOAT_PCI_CAPABILITY_OFFSET 0x06
-#define IOAT_PCI_CAPABILITY_MEMWR 0x1
-
-#define IOAT_FSB_CAP_ENABLE_OFFSET 0x08
-#define IOAT_FSB_CAP_ENABLE_PREFETCH 0x1
-
-#define IOAT_PCI_CAP_ENABLE_OFFSET 0x0A
-#define IOAT_PCI_CAP_ENABLE_MEMWR 0x1
-
-#define IOAT_APICID_TAG_MAP_OFFSET 0x0C
-#define IOAT_APICID_TAG_MAP_TAG0 0x0000000F
-#define IOAT_APICID_TAG_MAP_TAG0_SHIFT 0
-#define IOAT_APICID_TAG_MAP_TAG1 0x000000F0
-#define IOAT_APICID_TAG_MAP_TAG1_SHIFT 4
-#define IOAT_APICID_TAG_MAP_TAG2 0x00000F00
-#define IOAT_APICID_TAG_MAP_TAG2_SHIFT 8
-#define IOAT_APICID_TAG_MAP_TAG3 0x0000F000
-#define IOAT_APICID_TAG_MAP_TAG3_SHIFT 12
-#define IOAT_APICID_TAG_MAP_TAG4 0x000F0000
-#define IOAT_APICID_TAG_MAP_TAG4_SHIFT 16
-#define IOAT_APICID_TAG_CB2_VALID 0x8080808080
-
-#define IOAT_DCA_GREQID_OFFSET 0x10
-#define IOAT_DCA_GREQID_SIZE 0x04
-#define IOAT_DCA_GREQID_MASK 0xFFFF
-#define IOAT_DCA_GREQID_IGNOREFUN 0x10000000
-#define IOAT_DCA_GREQID_VALID 0x20000000
-#define IOAT_DCA_GREQID_LASTID 0x80000000
-
-#define IOAT3_CSI_CAPABILITY_OFFSET 0x08
-#define IOAT3_CSI_CAPABILITY_PREFETCH 0x1
-
-#define IOAT3_PCI_CAPABILITY_OFFSET 0x0A
-#define IOAT3_PCI_CAPABILITY_MEMWR 0x1
-
-#define IOAT3_CSI_CONTROL_OFFSET 0x0C
-#define IOAT3_CSI_CONTROL_PREFETCH 0x1
-
-#define IOAT3_PCI_CONTROL_OFFSET 0x0E
-#define IOAT3_PCI_CONTROL_MEMWR 0x1
-
-#define IOAT3_APICID_TAG_MAP_OFFSET 0x10
-#define IOAT3_APICID_TAG_MAP_OFFSET_LOW 0x10
-#define IOAT3_APICID_TAG_MAP_OFFSET_HIGH 0x14
-
-#define IOAT3_DCA_GREQID_OFFSET 0x02
-
-#define IOAT1_CHAINADDR_OFFSET 0x0C /* 64-bit Descriptor Chain Address Register */
-#define IOAT2_CHAINADDR_OFFSET 0x10 /* 64-bit Descriptor Chain Address Register */
-#define IOAT_CHAINADDR_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHAINADDR_OFFSET : IOAT2_CHAINADDR_OFFSET)
-#define IOAT1_CHAINADDR_OFFSET_LOW 0x0C
-#define IOAT2_CHAINADDR_OFFSET_LOW 0x10
-#define IOAT_CHAINADDR_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHAINADDR_OFFSET_LOW : IOAT2_CHAINADDR_OFFSET_LOW)
-#define IOAT1_CHAINADDR_OFFSET_HIGH 0x10
-#define IOAT2_CHAINADDR_OFFSET_HIGH 0x14
-#define IOAT_CHAINADDR_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHAINADDR_OFFSET_HIGH : IOAT2_CHAINADDR_OFFSET_HIGH)
-
-#define IOAT1_CHANCMD_OFFSET 0x14 /* 8-bit DMA Channel Command Register */
-#define IOAT2_CHANCMD_OFFSET 0x04 /* 8-bit DMA Channel Command Register */
-#define IOAT_CHANCMD_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANCMD_OFFSET : IOAT2_CHANCMD_OFFSET)
-#define IOAT_CHANCMD_RESET 0x20
-#define IOAT_CHANCMD_RESUME 0x10
-#define IOAT_CHANCMD_ABORT 0x08
-#define IOAT_CHANCMD_SUSPEND 0x04
-#define IOAT_CHANCMD_APPEND 0x02
-#define IOAT_CHANCMD_START 0x01
-
-#define IOAT_CHANCMP_OFFSET 0x18 /* 64-bit Channel Completion Address Register */
-#define IOAT_CHANCMP_OFFSET_LOW 0x18
-#define IOAT_CHANCMP_OFFSET_HIGH 0x1C
-
-#define IOAT_CDAR_OFFSET 0x20 /* 64-bit Current Descriptor Address Register */
-#define IOAT_CDAR_OFFSET_LOW 0x20
-#define IOAT_CDAR_OFFSET_HIGH 0x24
-
-#define IOAT_CHANERR_OFFSET 0x28 /* 32-bit Channel Error Register */
-#define IOAT_CHANERR_DMA_TRANSFER_SRC_ADDR_ERR 0x0001
-#define IOAT_CHANERR_DMA_TRANSFER_DEST_ADDR_ERR 0x0002
-#define IOAT_CHANERR_NEXT_DESCRIPTOR_ADDR_ERR 0x0004
-#define IOAT_CHANERR_NEXT_DESCRIPTOR_ALIGNMENT_ERR 0x0008
-#define IOAT_CHANERR_CHAIN_ADDR_VALUE_ERR 0x0010
-#define IOAT_CHANERR_CHANCMD_ERR 0x0020
-#define IOAT_CHANERR_CHIPSET_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0040
-#define IOAT_CHANERR_DMA_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0080
-#define IOAT_CHANERR_READ_DATA_ERR 0x0100
-#define IOAT_CHANERR_WRITE_DATA_ERR 0x0200
-#define IOAT_CHANERR_DESCRIPTOR_CONTROL_ERR 0x0400
-#define IOAT_CHANERR_DESCRIPTOR_LENGTH_ERR 0x0800
-#define IOAT_CHANERR_COMPLETION_ADDR_ERR 0x1000
-#define IOAT_CHANERR_INT_CONFIGURATION_ERR 0x2000
-#define IOAT_CHANERR_SOFT_ERR 0x4000
-#define IOAT_CHANERR_UNAFFILIATED_ERR 0x8000
-
-#define IOAT_CHANERR_MASK_OFFSET 0x2C /* 32-bit Channel Error Register */
-
-#endif /* _IOAT_REGISTERS_H_ */
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/ioport.h>
+#include <linux/raid/pq.h>
#include <mach/adma.h>
}
}
+static void
+iop_desc_unmap(struct iop_adma_chan *iop_chan, struct iop_adma_desc_slot *desc)
+{
+ struct dma_async_tx_descriptor *tx = &desc->async_tx;
+ struct iop_adma_desc_slot *unmap = desc->group_head;
+ struct device *dev = &iop_chan->device->pdev->dev;
+ u32 len = unmap->unmap_len;
+ enum dma_ctrl_flags flags = tx->flags;
+ u32 src_cnt;
+ dma_addr_t addr;
+ dma_addr_t dest;
+
+ src_cnt = unmap->unmap_src_cnt;
+ dest = iop_desc_get_dest_addr(unmap, iop_chan);
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ enum dma_data_direction dir;
+
+ if (src_cnt > 1) /* is xor? */
+ dir = DMA_BIDIRECTIONAL;
+ else
+ dir = DMA_FROM_DEVICE;
+
+ dma_unmap_page(dev, dest, len, dir);
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ while (src_cnt--) {
+ addr = iop_desc_get_src_addr(unmap, iop_chan, src_cnt);
+ if (addr == dest)
+ continue;
+ dma_unmap_page(dev, addr, len, DMA_TO_DEVICE);
+ }
+ }
+ desc->group_head = NULL;
+}
+
+static void
+iop_desc_unmap_pq(struct iop_adma_chan *iop_chan, struct iop_adma_desc_slot *desc)
+{
+ struct dma_async_tx_descriptor *tx = &desc->async_tx;
+ struct iop_adma_desc_slot *unmap = desc->group_head;
+ struct device *dev = &iop_chan->device->pdev->dev;
+ u32 len = unmap->unmap_len;
+ enum dma_ctrl_flags flags = tx->flags;
+ u32 src_cnt = unmap->unmap_src_cnt;
+ dma_addr_t pdest = iop_desc_get_dest_addr(unmap, iop_chan);
+ dma_addr_t qdest = iop_desc_get_qdest_addr(unmap, iop_chan);
+ int i;
+
+ if (tx->flags & DMA_PREP_CONTINUE)
+ src_cnt -= 3;
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP) && !desc->pq_check_result) {
+ dma_unmap_page(dev, pdest, len, DMA_BIDIRECTIONAL);
+ dma_unmap_page(dev, qdest, len, DMA_BIDIRECTIONAL);
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ dma_addr_t addr;
+
+ for (i = 0; i < src_cnt; i++) {
+ addr = iop_desc_get_src_addr(unmap, iop_chan, i);
+ dma_unmap_page(dev, addr, len, DMA_TO_DEVICE);
+ }
+ if (desc->pq_check_result) {
+ dma_unmap_page(dev, pdest, len, DMA_TO_DEVICE);
+ dma_unmap_page(dev, qdest, len, DMA_TO_DEVICE);
+ }
+ }
+
+ desc->group_head = NULL;
+}
+
+
static dma_cookie_t
iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *iop_chan, dma_cookie_t cookie)
{
- BUG_ON(desc->async_tx.cookie < 0);
- if (desc->async_tx.cookie > 0) {
- cookie = desc->async_tx.cookie;
- desc->async_tx.cookie = 0;
+ struct dma_async_tx_descriptor *tx = &desc->async_tx;
+
+ BUG_ON(tx->cookie < 0);
+ if (tx->cookie > 0) {
+ cookie = tx->cookie;
+ tx->cookie = 0;
/* call the callback (must not sleep or submit new
* operations to this channel)
*/
- if (desc->async_tx.callback)
- desc->async_tx.callback(
- desc->async_tx.callback_param);
+ if (tx->callback)
+ tx->callback(tx->callback_param);
/* unmap dma addresses
* (unmap_single vs unmap_page?)
*/
if (desc->group_head && desc->unmap_len) {
- struct iop_adma_desc_slot *unmap = desc->group_head;
- struct device *dev =
- &iop_chan->device->pdev->dev;
- u32 len = unmap->unmap_len;
- enum dma_ctrl_flags flags = desc->async_tx.flags;
- u32 src_cnt;
- dma_addr_t addr;
- dma_addr_t dest;
-
- src_cnt = unmap->unmap_src_cnt;
- dest = iop_desc_get_dest_addr(unmap, iop_chan);
- if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- enum dma_data_direction dir;
-
- if (src_cnt > 1) /* is xor? */
- dir = DMA_BIDIRECTIONAL;
- else
- dir = DMA_FROM_DEVICE;
-
- dma_unmap_page(dev, dest, len, dir);
- }
-
- if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- while (src_cnt--) {
- addr = iop_desc_get_src_addr(unmap,
- iop_chan,
- src_cnt);
- if (addr == dest)
- continue;
- dma_unmap_page(dev, addr, len,
- DMA_TO_DEVICE);
- }
- }
- desc->group_head = NULL;
+ if (iop_desc_is_pq(desc))
+ iop_desc_unmap_pq(iop_chan, desc);
+ else
+ iop_desc_unmap(iop_chan, desc);
}
}
/* run dependent operations */
- dma_run_dependencies(&desc->async_tx);
+ dma_run_dependencies(tx);
return cookie;
}
{
struct iop_adma_chan *iop_chan = (struct iop_adma_chan *) data;
- spin_lock(&iop_chan->lock);
+ /* lockdep will flag depedency submissions as potentially
+ * recursive locking, this is not the case as a dependency
+ * submission will never recurse a channels submit routine.
+ * There are checks in async_tx.c to prevent this.
+ */
+ spin_lock_nested(&iop_chan->lock, SINGLE_DEPTH_NESTING);
__iop_adma_slot_cleanup(iop_chan);
spin_unlock(&iop_chan->lock);
}
}
alloc_tail->group_head = alloc_start;
alloc_tail->async_tx.cookie = -EBUSY;
- list_splice(&chain, &alloc_tail->async_tx.tx_list);
+ list_splice(&chain, &alloc_tail->tx_list);
iop_chan->last_used = last_used;
iop_desc_clear_next_desc(alloc_start);
iop_desc_clear_next_desc(alloc_tail);
old_chain_tail = list_entry(iop_chan->chain.prev,
struct iop_adma_desc_slot, chain_node);
- list_splice_init(&sw_desc->async_tx.tx_list,
+ list_splice_init(&sw_desc->tx_list,
&old_chain_tail->chain_node);
/* fix up the hardware chain */
dma_async_tx_descriptor_init(&slot->async_tx, chan);
slot->async_tx.tx_submit = iop_adma_tx_submit;
+ INIT_LIST_HEAD(&slot->tx_list);
INIT_LIST_HEAD(&slot->chain_node);
INIT_LIST_HEAD(&slot->slot_node);
hw_desc = (char *) iop_chan->device->dma_desc_pool;
}
static struct dma_async_tx_descriptor *
-iop_adma_prep_dma_zero_sum(struct dma_chan *chan, dma_addr_t *dma_src,
- unsigned int src_cnt, size_t len, u32 *result,
- unsigned long flags)
+iop_adma_prep_dma_xor_val(struct dma_chan *chan, dma_addr_t *dma_src,
+ unsigned int src_cnt, size_t len, u32 *result,
+ unsigned long flags)
{
struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
struct iop_adma_desc_slot *sw_desc, *grp_start;
return sw_desc ? &sw_desc->async_tx : NULL;
}
+static struct dma_async_tx_descriptor *
+iop_adma_prep_dma_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ unsigned long flags)
+{
+ struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
+ struct iop_adma_desc_slot *sw_desc, *g;
+ int slot_cnt, slots_per_op;
+ int continue_srcs;
+
+ if (unlikely(!len))
+ return NULL;
+ BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
+
+ dev_dbg(iop_chan->device->common.dev,
+ "%s src_cnt: %d len: %u flags: %lx\n",
+ __func__, src_cnt, len, flags);
+
+ if (dmaf_p_disabled_continue(flags))
+ continue_srcs = 1+src_cnt;
+ else if (dmaf_continue(flags))
+ continue_srcs = 3+src_cnt;
+ else
+ continue_srcs = 0+src_cnt;
+
+ spin_lock_bh(&iop_chan->lock);
+ slot_cnt = iop_chan_pq_slot_count(len, continue_srcs, &slots_per_op);
+ sw_desc = iop_adma_alloc_slots(iop_chan, slot_cnt, slots_per_op);
+ if (sw_desc) {
+ int i;
+
+ g = sw_desc->group_head;
+ iop_desc_set_byte_count(g, iop_chan, len);
+
+ /* even if P is disabled its destination address (bits
+ * [3:0]) must match Q. It is ok if P points to an
+ * invalid address, it won't be written.
+ */
+ if (flags & DMA_PREP_PQ_DISABLE_P)
+ dst[0] = dst[1] & 0x7;
+
+ iop_desc_set_pq_addr(g, dst);
+ sw_desc->unmap_src_cnt = src_cnt;
+ sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
+ for (i = 0; i < src_cnt; i++)
+ iop_desc_set_pq_src_addr(g, i, src[i], scf[i]);
+
+ /* if we are continuing a previous operation factor in
+ * the old p and q values, see the comment for dma_maxpq
+ * in include/linux/dmaengine.h
+ */
+ if (dmaf_p_disabled_continue(flags))
+ iop_desc_set_pq_src_addr(g, i++, dst[1], 1);
+ else if (dmaf_continue(flags)) {
+ iop_desc_set_pq_src_addr(g, i++, dst[0], 0);
+ iop_desc_set_pq_src_addr(g, i++, dst[1], 1);
+ iop_desc_set_pq_src_addr(g, i++, dst[1], 0);
+ }
+ iop_desc_init_pq(g, i, flags);
+ }
+ spin_unlock_bh(&iop_chan->lock);
+
+ return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+static struct dma_async_tx_descriptor *
+iop_adma_prep_dma_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf,
+ size_t len, enum sum_check_flags *pqres,
+ unsigned long flags)
+{
+ struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
+ struct iop_adma_desc_slot *sw_desc, *g;
+ int slot_cnt, slots_per_op;
+
+ if (unlikely(!len))
+ return NULL;
+ BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
+
+ dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %u\n",
+ __func__, src_cnt, len);
+
+ spin_lock_bh(&iop_chan->lock);
+ slot_cnt = iop_chan_pq_zero_sum_slot_count(len, src_cnt + 2, &slots_per_op);
+ sw_desc = iop_adma_alloc_slots(iop_chan, slot_cnt, slots_per_op);
+ if (sw_desc) {
+ /* for validate operations p and q are tagged onto the
+ * end of the source list
+ */
+ int pq_idx = src_cnt;
+
+ g = sw_desc->group_head;
+ iop_desc_init_pq_zero_sum(g, src_cnt+2, flags);
+ iop_desc_set_pq_zero_sum_byte_count(g, len);
+ g->pq_check_result = pqres;
+ pr_debug("\t%s: g->pq_check_result: %p\n",
+ __func__, g->pq_check_result);
+ sw_desc->unmap_src_cnt = src_cnt+2;
+ sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
+ while (src_cnt--)
+ iop_desc_set_pq_zero_sum_src_addr(g, src_cnt,
+ src[src_cnt],
+ scf[src_cnt]);
+ iop_desc_set_pq_zero_sum_addr(g, pq_idx, src);
+ }
+ spin_unlock_bh(&iop_chan->lock);
+
+ return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
static void iop_adma_free_chan_resources(struct dma_chan *chan)
{
struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
#define IOP_ADMA_NUM_SRC_TEST 4 /* must be <= 15 */
static int __devinit
-iop_adma_xor_zero_sum_self_test(struct iop_adma_device *device)
+iop_adma_xor_val_self_test(struct iop_adma_device *device)
{
int i, src_idx;
struct page *dest;
PAGE_SIZE, DMA_TO_DEVICE);
/* skip zero sum if the capability is not present */
- if (!dma_has_cap(DMA_ZERO_SUM, dma_chan->device->cap_mask))
+ if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask))
goto free_resources;
/* zero sum the sources with the destintation page */
dma_srcs[i] = dma_map_page(dma_chan->device->dev,
zero_sum_srcs[i], 0, PAGE_SIZE,
DMA_TO_DEVICE);
- tx = iop_adma_prep_dma_zero_sum(dma_chan, dma_srcs,
- IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
- &zero_sum_result,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ tx = iop_adma_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &zero_sum_result,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
dma_srcs[i] = dma_map_page(dma_chan->device->dev,
zero_sum_srcs[i], 0, PAGE_SIZE,
DMA_TO_DEVICE);
- tx = iop_adma_prep_dma_zero_sum(dma_chan, dma_srcs,
- IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
- &zero_sum_result,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ tx = iop_adma_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &zero_sum_result,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
return err;
}
+#ifdef CONFIG_MD_RAID6_PQ
+static int __devinit
+iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device)
+{
+ /* combined sources, software pq results, and extra hw pq results */
+ struct page *pq[IOP_ADMA_NUM_SRC_TEST+2+2];
+ /* ptr to the extra hw pq buffers defined above */
+ struct page **pq_hw = &pq[IOP_ADMA_NUM_SRC_TEST+2];
+ /* address conversion buffers (dma_map / page_address) */
+ void *pq_sw[IOP_ADMA_NUM_SRC_TEST+2];
+ dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST];
+ dma_addr_t pq_dest[2];
+
+ int i;
+ struct dma_async_tx_descriptor *tx;
+ struct dma_chan *dma_chan;
+ dma_cookie_t cookie;
+ u32 zero_sum_result;
+ int err = 0;
+ struct device *dev;
+
+ dev_dbg(device->common.dev, "%s\n", __func__);
+
+ for (i = 0; i < ARRAY_SIZE(pq); i++) {
+ pq[i] = alloc_page(GFP_KERNEL);
+ if (!pq[i]) {
+ while (i--)
+ __free_page(pq[i]);
+ return -ENOMEM;
+ }
+ }
+
+ /* Fill in src buffers */
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST; i++) {
+ pq_sw[i] = page_address(pq[i]);
+ memset(pq_sw[i], 0x11111111 * (1<<i), PAGE_SIZE);
+ }
+ pq_sw[i] = page_address(pq[i]);
+ pq_sw[i+1] = page_address(pq[i+1]);
+
+ dma_chan = container_of(device->common.channels.next,
+ struct dma_chan,
+ device_node);
+ if (iop_adma_alloc_chan_resources(dma_chan) < 1) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ dev = dma_chan->device->dev;
+
+ /* initialize the dests */
+ memset(page_address(pq_hw[0]), 0 , PAGE_SIZE);
+ memset(page_address(pq_hw[1]), 0 , PAGE_SIZE);
+
+ /* test pq */
+ pq_dest[0] = dma_map_page(dev, pq_hw[0], 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ pq_dest[1] = dma_map_page(dev, pq_hw[1], 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST; i++)
+ pq_src[i] = dma_map_page(dev, pq[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+
+ tx = iop_adma_prep_dma_pq(dma_chan, pq_dest, pq_src,
+ IOP_ADMA_NUM_SRC_TEST, (u8 *)raid6_gfexp,
+ PAGE_SIZE,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+
+ cookie = iop_adma_tx_submit(tx);
+ iop_adma_issue_pending(dma_chan);
+ msleep(8);
+
+ if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
+ DMA_SUCCESS) {
+ dev_err(dev, "Self-test pq timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ raid6_call.gen_syndrome(IOP_ADMA_NUM_SRC_TEST+2, PAGE_SIZE, pq_sw);
+
+ if (memcmp(pq_sw[IOP_ADMA_NUM_SRC_TEST],
+ page_address(pq_hw[0]), PAGE_SIZE) != 0) {
+ dev_err(dev, "Self-test p failed compare, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ if (memcmp(pq_sw[IOP_ADMA_NUM_SRC_TEST+1],
+ page_address(pq_hw[1]), PAGE_SIZE) != 0) {
+ dev_err(dev, "Self-test q failed compare, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ /* test correct zero sum using the software generated pq values */
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST + 2; i++)
+ pq_src[i] = dma_map_page(dev, pq[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+
+ zero_sum_result = ~0;
+ tx = iop_adma_prep_dma_pq_val(dma_chan, &pq_src[IOP_ADMA_NUM_SRC_TEST],
+ pq_src, IOP_ADMA_NUM_SRC_TEST,
+ raid6_gfexp, PAGE_SIZE, &zero_sum_result,
+ DMA_PREP_INTERRUPT|DMA_CTRL_ACK);
+
+ cookie = iop_adma_tx_submit(tx);
+ iop_adma_issue_pending(dma_chan);
+ msleep(8);
+
+ if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
+ DMA_SUCCESS) {
+ dev_err(dev, "Self-test pq-zero-sum timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (zero_sum_result != 0) {
+ dev_err(dev, "Self-test pq-zero-sum failed to validate: %x\n",
+ zero_sum_result);
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ /* test incorrect zero sum */
+ i = IOP_ADMA_NUM_SRC_TEST;
+ memset(pq_sw[i] + 100, 0, 100);
+ memset(pq_sw[i+1] + 200, 0, 200);
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST + 2; i++)
+ pq_src[i] = dma_map_page(dev, pq[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+
+ zero_sum_result = 0;
+ tx = iop_adma_prep_dma_pq_val(dma_chan, &pq_src[IOP_ADMA_NUM_SRC_TEST],
+ pq_src, IOP_ADMA_NUM_SRC_TEST,
+ raid6_gfexp, PAGE_SIZE, &zero_sum_result,
+ DMA_PREP_INTERRUPT|DMA_CTRL_ACK);
+
+ cookie = iop_adma_tx_submit(tx);
+ iop_adma_issue_pending(dma_chan);
+ msleep(8);
+
+ if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
+ DMA_SUCCESS) {
+ dev_err(dev, "Self-test !pq-zero-sum timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (zero_sum_result != (SUM_CHECK_P_RESULT | SUM_CHECK_Q_RESULT)) {
+ dev_err(dev, "Self-test !pq-zero-sum failed to validate: %x\n",
+ zero_sum_result);
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+free_resources:
+ iop_adma_free_chan_resources(dma_chan);
+out:
+ i = ARRAY_SIZE(pq);
+ while (i--)
+ __free_page(pq[i]);
+ return err;
+}
+#endif
+
static int __devexit iop_adma_remove(struct platform_device *dev)
{
struct iop_adma_device *device = platform_get_drvdata(dev);
dma_dev->max_xor = iop_adma_get_max_xor();
dma_dev->device_prep_dma_xor = iop_adma_prep_dma_xor;
}
- if (dma_has_cap(DMA_ZERO_SUM, dma_dev->cap_mask))
- dma_dev->device_prep_dma_zero_sum =
- iop_adma_prep_dma_zero_sum;
+ if (dma_has_cap(DMA_XOR_VAL, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_xor_val =
+ iop_adma_prep_dma_xor_val;
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
+ dma_set_maxpq(dma_dev, iop_adma_get_max_pq(), 0);
+ dma_dev->device_prep_dma_pq = iop_adma_prep_dma_pq;
+ }
+ if (dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_pq_val =
+ iop_adma_prep_dma_pq_val;
if (dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask))
dma_dev->device_prep_dma_interrupt =
iop_adma_prep_dma_interrupt;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask) ||
- dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) {
- ret = iop_adma_xor_zero_sum_self_test(adev);
+ dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) {
+ ret = iop_adma_xor_val_self_test(adev);
dev_dbg(&pdev->dev, "xor self test returned %d\n", ret);
if (ret)
goto err_free_iop_chan;
}
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask) &&
+ dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask)) {
+ #ifdef CONFIG_MD_RAID6_PQ
+ ret = iop_adma_pq_zero_sum_self_test(adev);
+ dev_dbg(&pdev->dev, "pq self test returned %d\n", ret);
+ #else
+ /* can not test raid6, so do not publish capability */
+ dma_cap_clear(DMA_PQ, dma_dev->cap_mask);
+ dma_cap_clear(DMA_PQ_VAL, dma_dev->cap_mask);
+ ret = 0;
+ #endif
+ if (ret)
+ goto err_free_iop_chan;
+ }
+
dev_printk(KERN_INFO, &pdev->dev, "Intel(R) IOP: "
- "( %s%s%s%s%s%s%s%s%s%s)\n",
- dma_has_cap(DMA_PQ_XOR, dma_dev->cap_mask) ? "pq_xor " : "",
- dma_has_cap(DMA_PQ_UPDATE, dma_dev->cap_mask) ? "pq_update " : "",
- dma_has_cap(DMA_PQ_ZERO_SUM, dma_dev->cap_mask) ? "pq_zero_sum " : "",
+ "( %s%s%s%s%s%s%s)\n",
+ dma_has_cap(DMA_PQ, dma_dev->cap_mask) ? "pq " : "",
+ dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask) ? "pq_val " : "",
dma_has_cap(DMA_XOR, dma_dev->cap_mask) ? "xor " : "",
- dma_has_cap(DMA_DUAL_XOR, dma_dev->cap_mask) ? "dual_xor " : "",
- dma_has_cap(DMA_ZERO_SUM, dma_dev->cap_mask) ? "xor_zero_sum " : "",
+ dma_has_cap(DMA_XOR_VAL, dma_dev->cap_mask) ? "xor_val " : "",
dma_has_cap(DMA_MEMSET, dma_dev->cap_mask) ? "fill " : "",
- dma_has_cap(DMA_MEMCPY_CRC32C, dma_dev->cap_mask) ? "cpy+crc " : "",
dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask) ? "cpy " : "",
dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask) ? "intr " : "");
if (sw_desc) {
grp_start = sw_desc->group_head;
- list_splice_init(&sw_desc->async_tx.tx_list, &iop_chan->chain);
+ list_splice_init(&sw_desc->tx_list, &iop_chan->chain);
async_tx_ack(&sw_desc->async_tx);
iop_desc_init_memcpy(grp_start, 0);
iop_desc_set_byte_count(grp_start, iop_chan, 0);
sw_desc = iop_adma_alloc_slots(iop_chan, slot_cnt, slots_per_op);
if (sw_desc) {
grp_start = sw_desc->group_head;
- list_splice_init(&sw_desc->async_tx.tx_list, &iop_chan->chain);
+ list_splice_init(&sw_desc->tx_list, &iop_chan->chain);
async_tx_ack(&sw_desc->async_tx);
iop_desc_init_null_xor(grp_start, 2, 0);
iop_desc_set_byte_count(grp_start, iop_chan, 0);
iov_byte_offset,
kdata,
copy);
+ /* poll for a descriptor slot */
+ if (unlikely(dma_cookie < 0)) {
+ dma_async_issue_pending(chan);
+ continue;
+ }
len -= copy;
iov[iovec_idx].iov_len -= copy;
page,
offset,
copy);
+ /* poll for a descriptor slot */
+ if (unlikely(dma_cookie < 0)) {
+ dma_async_issue_pending(chan);
+ continue;
+ }
len -= copy;
iov[iovec_idx].iov_len -= copy;
}
alloc_tail->group_head = alloc_start;
alloc_tail->async_tx.cookie = -EBUSY;
- list_splice(&chain, &alloc_tail->async_tx.tx_list);
+ list_splice(&chain, &alloc_tail->tx_list);
mv_chan->last_used = last_used;
mv_desc_clear_next_desc(alloc_start);
mv_desc_clear_next_desc(alloc_tail);
cookie = mv_desc_assign_cookie(mv_chan, sw_desc);
if (list_empty(&mv_chan->chain))
- list_splice_init(&sw_desc->async_tx.tx_list, &mv_chan->chain);
+ list_splice_init(&sw_desc->tx_list, &mv_chan->chain);
else {
new_hw_chain = 0;
old_chain_tail = list_entry(mv_chan->chain.prev,
struct mv_xor_desc_slot,
chain_node);
- list_splice_init(&grp_start->async_tx.tx_list,
+ list_splice_init(&grp_start->tx_list,
&old_chain_tail->chain_node);
if (!mv_can_chain(grp_start))
slot->async_tx.tx_submit = mv_xor_tx_submit;
INIT_LIST_HEAD(&slot->chain_node);
INIT_LIST_HEAD(&slot->slot_node);
+ INIT_LIST_HEAD(&slot->tx_list);
hw_desc = (char *) mv_chan->device->dma_desc_pool;
slot->async_tx.phys =
(dma_addr_t) &hw_desc[idx * MV_XOR_SLOT_SIZE];
* @idx: pool index
* @unmap_src_cnt: number of xor sources
* @unmap_len: transaction bytecount
+ * @tx_list: list of slots that make up a multi-descriptor transaction
* @async_tx: support for the async_tx api
- * @group_list: list of slots that make up a multi-descriptor transaction
- * for example transfer lengths larger than the supported hw max
* @xor_check_result: result of zero sum
* @crc32_result: result crc calculation
*/
u16 unmap_src_cnt;
u32 value;
size_t unmap_len;
+ struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
union {
u32 *xor_check_result;
--- /dev/null
+/*
+ * Renesas SuperH DMA Engine support
+ *
+ * base is drivers/dma/flsdma.c
+ *
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * - DMA of SuperH does not have Hardware DMA chain mode.
+ * - MAX DMA size is 16MB.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/platform_device.h>
+#include <cpu/dma.h>
+#include <asm/dma-sh.h>
+#include "shdma.h"
+
+/* DMA descriptor control */
+#define DESC_LAST (-1)
+#define DESC_COMP (1)
+#define DESC_NCOMP (0)
+
+#define NR_DESCS_PER_CHANNEL 32
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ *
+ * And this driver set 4byte burst mode.
+ * If you want to change mode, you need to change RS_DEFAULT of value.
+ * (ex 1byte burst mode -> (RS_DUAL & ~TS_32)
+ */
+#define RS_DEFAULT (RS_DUAL)
+
+#define SH_DMAC_CHAN_BASE(id) (dma_base_addr[id])
+static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
+{
+ ctrl_outl(data, (SH_DMAC_CHAN_BASE(sh_dc->id) + reg));
+}
+
+static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg)
+{
+ return ctrl_inl((SH_DMAC_CHAN_BASE(sh_dc->id) + reg));
+}
+
+static void dmae_init(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = RS_DEFAULT; /* default is DUAL mode */
+ sh_dmae_writel(sh_chan, chcr, CHCR);
+}
+
+/*
+ * Reset DMA controller
+ *
+ * SH7780 has two DMAOR register
+ */
+static void sh_dmae_ctl_stop(int id)
+{
+ unsigned short dmaor = dmaor_read_reg(id);
+
+ dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
+ dmaor_write_reg(id, dmaor);
+}
+
+static int sh_dmae_rst(int id)
+{
+ unsigned short dmaor;
+
+ sh_dmae_ctl_stop(id);
+ dmaor = (dmaor_read_reg(id)|DMAOR_INIT);
+
+ dmaor_write_reg(id, dmaor);
+ if ((dmaor_read_reg(id) & (DMAOR_AE | DMAOR_NMIF))) {
+ pr_warning(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int dmae_is_idle(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+ if (chcr & CHCR_DE) {
+ if (!(chcr & CHCR_TE))
+ return -EBUSY; /* working */
+ }
+ return 0; /* waiting */
+}
+
+static inline unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+ return ts_shift[(chcr & CHCR_TS_MASK) >> CHCR_TS_SHIFT];
+}
+
+static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs hw)
+{
+ sh_dmae_writel(sh_chan, hw.sar, SAR);
+ sh_dmae_writel(sh_chan, hw.dar, DAR);
+ sh_dmae_writel(sh_chan,
+ (hw.tcr >> calc_xmit_shift(sh_chan)), TCR);
+}
+
+static void dmae_start(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+
+ chcr |= (CHCR_DE|CHCR_IE);
+ sh_dmae_writel(sh_chan, chcr, CHCR);
+}
+
+static void dmae_halt(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+
+ chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
+ sh_dmae_writel(sh_chan, chcr, CHCR);
+}
+
+static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
+{
+ int ret = dmae_is_idle(sh_chan);
+ /* When DMA was working, can not set data to CHCR */
+ if (ret)
+ return ret;
+
+ sh_dmae_writel(sh_chan, val, CHCR);
+ return 0;
+}
+
+#define DMARS1_ADDR 0x04
+#define DMARS2_ADDR 0x08
+#define DMARS_SHIFT 8
+#define DMARS_CHAN_MSK 0x01
+static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
+{
+ u32 addr;
+ int shift = 0;
+ int ret = dmae_is_idle(sh_chan);
+ if (ret)
+ return ret;
+
+ if (sh_chan->id & DMARS_CHAN_MSK)
+ shift = DMARS_SHIFT;
+
+ switch (sh_chan->id) {
+ /* DMARS0 */
+ case 0:
+ case 1:
+ addr = SH_DMARS_BASE;
+ break;
+ /* DMARS1 */
+ case 2:
+ case 3:
+ addr = (SH_DMARS_BASE + DMARS1_ADDR);
+ break;
+ /* DMARS2 */
+ case 4:
+ case 5:
+ addr = (SH_DMARS_BASE + DMARS2_ADDR);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ctrl_outw((val << shift) |
+ (ctrl_inw(addr) & (shift ? 0xFF00 : 0x00FF)),
+ addr);
+
+ return 0;
+}
+
+static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct sh_desc *desc = tx_to_sh_desc(tx);
+ struct sh_dmae_chan *sh_chan = to_sh_chan(tx->chan);
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+
+ cookie = sh_chan->common.cookie;
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+
+ /* If desc only in the case of 1 */
+ if (desc->async_tx.cookie != -EBUSY)
+ desc->async_tx.cookie = cookie;
+ sh_chan->common.cookie = desc->async_tx.cookie;
+
+ list_splice_init(&desc->tx_list, sh_chan->ld_queue.prev);
+
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ return cookie;
+}
+
+static struct sh_desc *sh_dmae_get_desc(struct sh_dmae_chan *sh_chan)
+{
+ struct sh_desc *desc, *_desc, *ret = NULL;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ list_for_each_entry_safe(desc, _desc, &sh_chan->ld_free, node) {
+ if (async_tx_test_ack(&desc->async_tx)) {
+ list_del(&desc->node);
+ ret = desc;
+ break;
+ }
+ }
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ return ret;
+}
+
+static void sh_dmae_put_desc(struct sh_dmae_chan *sh_chan, struct sh_desc *desc)
+{
+ if (desc) {
+ spin_lock_bh(&sh_chan->desc_lock);
+
+ list_splice_init(&desc->tx_list, &sh_chan->ld_free);
+ list_add(&desc->node, &sh_chan->ld_free);
+
+ spin_unlock_bh(&sh_chan->desc_lock);
+ }
+}
+
+static int sh_dmae_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ struct sh_desc *desc;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ while (sh_chan->descs_allocated < NR_DESCS_PER_CHANNEL) {
+ spin_unlock_bh(&sh_chan->desc_lock);
+ desc = kzalloc(sizeof(struct sh_desc), GFP_KERNEL);
+ if (!desc) {
+ spin_lock_bh(&sh_chan->desc_lock);
+ break;
+ }
+ dma_async_tx_descriptor_init(&desc->async_tx,
+ &sh_chan->common);
+ desc->async_tx.tx_submit = sh_dmae_tx_submit;
+ desc->async_tx.flags = DMA_CTRL_ACK;
+ INIT_LIST_HEAD(&desc->tx_list);
+ sh_dmae_put_desc(sh_chan, desc);
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ sh_chan->descs_allocated++;
+ }
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ return sh_chan->descs_allocated;
+}
+
+/*
+ * sh_dma_free_chan_resources - Free all resources of the channel.
+ */
+static void sh_dmae_free_chan_resources(struct dma_chan *chan)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ struct sh_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ BUG_ON(!list_empty(&sh_chan->ld_queue));
+ spin_lock_bh(&sh_chan->desc_lock);
+
+ list_splice_init(&sh_chan->ld_free, &list);
+ sh_chan->descs_allocated = 0;
+
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ list_for_each_entry_safe(desc, _desc, &list, node)
+ kfree(desc);
+}
+
+static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy(
+ struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
+ size_t len, unsigned long flags)
+{
+ struct sh_dmae_chan *sh_chan;
+ struct sh_desc *first = NULL, *prev = NULL, *new;
+ size_t copy_size;
+
+ if (!chan)
+ return NULL;
+
+ if (!len)
+ return NULL;
+
+ sh_chan = to_sh_chan(chan);
+
+ do {
+ /* Allocate the link descriptor from DMA pool */
+ new = sh_dmae_get_desc(sh_chan);
+ if (!new) {
+ dev_err(sh_chan->dev,
+ "No free memory for link descriptor\n");
+ goto err_get_desc;
+ }
+
+ copy_size = min(len, (size_t)SH_DMA_TCR_MAX);
+
+ new->hw.sar = dma_src;
+ new->hw.dar = dma_dest;
+ new->hw.tcr = copy_size;
+ if (!first)
+ first = new;
+
+ new->mark = DESC_NCOMP;
+ async_tx_ack(&new->async_tx);
+
+ prev = new;
+ len -= copy_size;
+ dma_src += copy_size;
+ dma_dest += copy_size;
+ /* Insert the link descriptor to the LD ring */
+ list_add_tail(&new->node, &first->tx_list);
+ } while (len);
+
+ new->async_tx.flags = flags; /* client is in control of this ack */
+ new->async_tx.cookie = -EBUSY; /* Last desc */
+
+ return &first->async_tx;
+
+err_get_desc:
+ sh_dmae_put_desc(sh_chan, first);
+ return NULL;
+
+}
+
+/*
+ * sh_chan_ld_cleanup - Clean up link descriptors
+ *
+ * This function clean up the ld_queue of DMA channel.
+ */
+static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan)
+{
+ struct sh_desc *desc, *_desc;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ list_for_each_entry_safe(desc, _desc, &sh_chan->ld_queue, node) {
+ dma_async_tx_callback callback;
+ void *callback_param;
+
+ /* non send data */
+ if (desc->mark == DESC_NCOMP)
+ break;
+
+ /* send data sesc */
+ callback = desc->async_tx.callback;
+ callback_param = desc->async_tx.callback_param;
+
+ /* Remove from ld_queue list */
+ list_splice_init(&desc->tx_list, &sh_chan->ld_free);
+
+ dev_dbg(sh_chan->dev, "link descriptor %p will be recycle.\n",
+ desc);
+
+ list_move(&desc->node, &sh_chan->ld_free);
+ /* Run the link descriptor callback function */
+ if (callback) {
+ spin_unlock_bh(&sh_chan->desc_lock);
+ dev_dbg(sh_chan->dev, "link descriptor %p callback\n",
+ desc);
+ callback(callback_param);
+ spin_lock_bh(&sh_chan->desc_lock);
+ }
+ }
+ spin_unlock_bh(&sh_chan->desc_lock);
+}
+
+static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
+{
+ struct list_head *ld_node;
+ struct sh_dmae_regs hw;
+
+ /* DMA work check */
+ if (dmae_is_idle(sh_chan))
+ return;
+
+ /* Find the first un-transfer desciptor */
+ for (ld_node = sh_chan->ld_queue.next;
+ (ld_node != &sh_chan->ld_queue)
+ && (to_sh_desc(ld_node)->mark == DESC_COMP);
+ ld_node = ld_node->next)
+ cpu_relax();
+
+ if (ld_node != &sh_chan->ld_queue) {
+ /* Get the ld start address from ld_queue */
+ hw = to_sh_desc(ld_node)->hw;
+ dmae_set_reg(sh_chan, hw);
+ dmae_start(sh_chan);
+ }
+}
+
+static void sh_dmae_memcpy_issue_pending(struct dma_chan *chan)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ sh_chan_xfer_ld_queue(sh_chan);
+}
+
+static enum dma_status sh_dmae_is_complete(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ dma_cookie_t *done,
+ dma_cookie_t *used)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+
+ sh_dmae_chan_ld_cleanup(sh_chan);
+
+ last_used = chan->cookie;
+ last_complete = sh_chan->completed_cookie;
+ if (last_complete == -EBUSY)
+ last_complete = last_used;
+
+ if (done)
+ *done = last_complete;
+
+ if (used)
+ *used = last_used;
+
+ return dma_async_is_complete(cookie, last_complete, last_used);
+}
+
+static irqreturn_t sh_dmae_interrupt(int irq, void *data)
+{
+ irqreturn_t ret = IRQ_NONE;
+ struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data;
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+
+ if (chcr & CHCR_TE) {
+ /* DMA stop */
+ dmae_halt(sh_chan);
+
+ ret = IRQ_HANDLED;
+ tasklet_schedule(&sh_chan->tasklet);
+ }
+
+ return ret;
+}
+
+#if defined(CONFIG_CPU_SH4)
+static irqreturn_t sh_dmae_err(int irq, void *data)
+{
+ int err = 0;
+ struct sh_dmae_device *shdev = (struct sh_dmae_device *)data;
+
+ /* IRQ Multi */
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ int cnt = 0;
+ switch (irq) {
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+ case DMTE6_IRQ:
+ cnt++;
+#endif
+ case DMTE0_IRQ:
+ if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) {
+ disable_irq(irq);
+ return IRQ_HANDLED;
+ }
+ default:
+ return IRQ_NONE;
+ }
+ } else {
+ /* reset dma controller */
+ err = sh_dmae_rst(0);
+ if (err)
+ return err;
+ if (shdev->pdata.mode & SHDMA_DMAOR1) {
+ err = sh_dmae_rst(1);
+ if (err)
+ return err;
+ }
+ disable_irq(irq);
+ return IRQ_HANDLED;
+ }
+}
+#endif
+
+static void dmae_do_tasklet(unsigned long data)
+{
+ struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data;
+ struct sh_desc *desc, *_desc, *cur_desc = NULL;
+ u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
+ list_for_each_entry_safe(desc, _desc,
+ &sh_chan->ld_queue, node) {
+ if ((desc->hw.sar + desc->hw.tcr) == sar_buf) {
+ cur_desc = desc;
+ break;
+ }
+ }
+
+ if (cur_desc) {
+ switch (cur_desc->async_tx.cookie) {
+ case 0: /* other desc data */
+ break;
+ case -EBUSY: /* last desc */
+ sh_chan->completed_cookie =
+ cur_desc->async_tx.cookie;
+ break;
+ default: /* first desc ( 0 < )*/
+ sh_chan->completed_cookie =
+ cur_desc->async_tx.cookie - 1;
+ break;
+ }
+ cur_desc->mark = DESC_COMP;
+ }
+ /* Next desc */
+ sh_chan_xfer_ld_queue(sh_chan);
+ sh_dmae_chan_ld_cleanup(sh_chan);
+}
+
+static unsigned int get_dmae_irq(unsigned int id)
+{
+ unsigned int irq = 0;
+ if (id < ARRAY_SIZE(dmte_irq_map))
+ irq = dmte_irq_map[id];
+ return irq;
+}
+
+static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id)
+{
+ int err;
+ unsigned int irq = get_dmae_irq(id);
+ unsigned long irqflags = IRQF_DISABLED;
+ struct sh_dmae_chan *new_sh_chan;
+
+ /* alloc channel */
+ new_sh_chan = kzalloc(sizeof(struct sh_dmae_chan), GFP_KERNEL);
+ if (!new_sh_chan) {
+ dev_err(shdev->common.dev, "No free memory for allocating "
+ "dma channels!\n");
+ return -ENOMEM;
+ }
+
+ new_sh_chan->dev = shdev->common.dev;
+ new_sh_chan->id = id;
+
+ /* Init DMA tasklet */
+ tasklet_init(&new_sh_chan->tasklet, dmae_do_tasklet,
+ (unsigned long)new_sh_chan);
+
+ /* Init the channel */
+ dmae_init(new_sh_chan);
+
+ spin_lock_init(&new_sh_chan->desc_lock);
+
+ /* Init descripter manage list */
+ INIT_LIST_HEAD(&new_sh_chan->ld_queue);
+ INIT_LIST_HEAD(&new_sh_chan->ld_free);
+
+ /* copy struct dma_device */
+ new_sh_chan->common.device = &shdev->common;
+
+ /* Add the channel to DMA device channel list */
+ list_add_tail(&new_sh_chan->common.device_node,
+ &shdev->common.channels);
+ shdev->common.chancnt++;
+
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ irqflags = IRQF_SHARED;
+#if defined(DMTE6_IRQ)
+ if (irq >= DMTE6_IRQ)
+ irq = DMTE6_IRQ;
+ else
+#endif
+ irq = DMTE0_IRQ;
+ }
+
+ snprintf(new_sh_chan->dev_id, sizeof(new_sh_chan->dev_id),
+ "sh-dmae%d", new_sh_chan->id);
+
+ /* set up channel irq */
+ err = request_irq(irq, &sh_dmae_interrupt,
+ irqflags, new_sh_chan->dev_id, new_sh_chan);
+ if (err) {
+ dev_err(shdev->common.dev, "DMA channel %d request_irq error "
+ "with return %d\n", id, err);
+ goto err_no_irq;
+ }
+
+ /* CHCR register control function */
+ new_sh_chan->set_chcr = dmae_set_chcr;
+ /* DMARS register control function */
+ new_sh_chan->set_dmars = dmae_set_dmars;
+
+ shdev->chan[id] = new_sh_chan;
+ return 0;
+
+err_no_irq:
+ /* remove from dmaengine device node */
+ list_del(&new_sh_chan->common.device_node);
+ kfree(new_sh_chan);
+ return err;
+}
+
+static void sh_dmae_chan_remove(struct sh_dmae_device *shdev)
+{
+ int i;
+
+ for (i = shdev->common.chancnt - 1 ; i >= 0 ; i--) {
+ if (shdev->chan[i]) {
+ struct sh_dmae_chan *shchan = shdev->chan[i];
+ if (!(shdev->pdata.mode & SHDMA_MIX_IRQ))
+ free_irq(dmte_irq_map[i], shchan);
+
+ list_del(&shchan->common.device_node);
+ kfree(shchan);
+ shdev->chan[i] = NULL;
+ }
+ }
+ shdev->common.chancnt = 0;
+}
+
+static int __init sh_dmae_probe(struct platform_device *pdev)
+{
+ int err = 0, cnt, ecnt;
+ unsigned long irqflags = IRQF_DISABLED;
+#if defined(CONFIG_CPU_SH4)
+ int eirq[] = { DMAE0_IRQ,
+#if defined(DMAE1_IRQ)
+ DMAE1_IRQ
+#endif
+ };
+#endif
+ struct sh_dmae_device *shdev;
+
+ shdev = kzalloc(sizeof(struct sh_dmae_device), GFP_KERNEL);
+ if (!shdev) {
+ dev_err(&pdev->dev, "No enough memory\n");
+ err = -ENOMEM;
+ goto shdev_err;
+ }
+
+ /* get platform data */
+ if (!pdev->dev.platform_data)
+ goto shdev_err;
+
+ /* platform data */
+ memcpy(&shdev->pdata, pdev->dev.platform_data,
+ sizeof(struct sh_dmae_pdata));
+
+ /* reset dma controller */
+ err = sh_dmae_rst(0);
+ if (err)
+ goto rst_err;
+
+ /* SH7780/85/23 has DMAOR1 */
+ if (shdev->pdata.mode & SHDMA_DMAOR1) {
+ err = sh_dmae_rst(1);
+ if (err)
+ goto rst_err;
+ }
+
+ INIT_LIST_HEAD(&shdev->common.channels);
+
+ dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
+ shdev->common.device_alloc_chan_resources
+ = sh_dmae_alloc_chan_resources;
+ shdev->common.device_free_chan_resources = sh_dmae_free_chan_resources;
+ shdev->common.device_prep_dma_memcpy = sh_dmae_prep_memcpy;
+ shdev->common.device_is_tx_complete = sh_dmae_is_complete;
+ shdev->common.device_issue_pending = sh_dmae_memcpy_issue_pending;
+ shdev->common.dev = &pdev->dev;
+
+#if defined(CONFIG_CPU_SH4)
+ /* Non Mix IRQ mode SH7722/SH7730 etc... */
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ irqflags = IRQF_SHARED;
+ eirq[0] = DMTE0_IRQ;
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+ eirq[1] = DMTE6_IRQ;
+#endif
+ }
+
+ for (ecnt = 0 ; ecnt < ARRAY_SIZE(eirq); ecnt++) {
+ err = request_irq(eirq[ecnt], sh_dmae_err,
+ irqflags, "DMAC Address Error", shdev);
+ if (err) {
+ dev_err(&pdev->dev, "DMA device request_irq"
+ "error (irq %d) with return %d\n",
+ eirq[ecnt], err);
+ goto eirq_err;
+ }
+ }
+#endif /* CONFIG_CPU_SH4 */
+
+ /* Create DMA Channel */
+ for (cnt = 0 ; cnt < MAX_DMA_CHANNELS ; cnt++) {
+ err = sh_dmae_chan_probe(shdev, cnt);
+ if (err)
+ goto chan_probe_err;
+ }
+
+ platform_set_drvdata(pdev, shdev);
+ dma_async_device_register(&shdev->common);
+
+ return err;
+
+chan_probe_err:
+ sh_dmae_chan_remove(shdev);
+
+eirq_err:
+ for (ecnt-- ; ecnt >= 0; ecnt--)
+ free_irq(eirq[ecnt], shdev);
+
+rst_err:
+ kfree(shdev);
+
+shdev_err:
+ return err;
+}
+
+static int __exit sh_dmae_remove(struct platform_device *pdev)
+{
+ struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
+
+ dma_async_device_unregister(&shdev->common);
+
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ free_irq(DMTE0_IRQ, shdev);
+#if defined(DMTE6_IRQ)
+ free_irq(DMTE6_IRQ, shdev);
+#endif
+ }
+
+ /* channel data remove */
+ sh_dmae_chan_remove(shdev);
+
+ if (!(shdev->pdata.mode & SHDMA_MIX_IRQ)) {
+ free_irq(DMAE0_IRQ, shdev);
+#if defined(DMAE1_IRQ)
+ free_irq(DMAE1_IRQ, shdev);
+#endif
+ }
+ kfree(shdev);
+
+ return 0;
+}
+
+static void sh_dmae_shutdown(struct platform_device *pdev)
+{
+ struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
+ sh_dmae_ctl_stop(0);
+ if (shdev->pdata.mode & SHDMA_DMAOR1)
+ sh_dmae_ctl_stop(1);
+}
+
+static struct platform_driver sh_dmae_driver = {
+ .remove = __exit_p(sh_dmae_remove),
+ .shutdown = sh_dmae_shutdown,
+ .driver = {
+ .name = "sh-dma-engine",
+ },
+};
+
+static int __init sh_dmae_init(void)
+{
+ return platform_driver_probe(&sh_dmae_driver, sh_dmae_probe);
+}
+module_init(sh_dmae_init);
+
+static void __exit sh_dmae_exit(void)
+{
+ platform_driver_unregister(&sh_dmae_driver);
+}
+module_exit(sh_dmae_exit);
+
+MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
+MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Renesas SuperH DMA Engine support
+ *
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __DMA_SHDMA_H
+#define __DMA_SHDMA_H
+
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/dmaengine.h>
+
+#define SH_DMA_TCR_MAX 0x00FFFFFF /* 16MB */
+
+struct sh_dmae_regs {
+ u32 sar; /* SAR / source address */
+ u32 dar; /* DAR / destination address */
+ u32 tcr; /* TCR / transfer count */
+};
+
+struct sh_desc {
+ struct list_head tx_list;
+ struct sh_dmae_regs hw;
+ struct list_head node;
+ struct dma_async_tx_descriptor async_tx;
+ int mark;
+};
+
+struct sh_dmae_chan {
+ dma_cookie_t completed_cookie; /* The maximum cookie completed */
+ spinlock_t desc_lock; /* Descriptor operation lock */
+ struct list_head ld_queue; /* Link descriptors queue */
+ struct list_head ld_free; /* Link descriptors free */
+ struct dma_chan common; /* DMA common channel */
+ struct device *dev; /* Channel device */
+ struct tasklet_struct tasklet; /* Tasklet */
+ int descs_allocated; /* desc count */
+ int id; /* Raw id of this channel */
+ char dev_id[16]; /* unique name per DMAC of channel */
+
+ /* Set chcr */
+ int (*set_chcr)(struct sh_dmae_chan *sh_chan, u32 regs);
+ /* Set DMA resource */
+ int (*set_dmars)(struct sh_dmae_chan *sh_chan, u16 res);
+};
+
+struct sh_dmae_device {
+ struct dma_device common;
+ struct sh_dmae_chan *chan[MAX_DMA_CHANNELS];
+ struct sh_dmae_pdata pdata;
+};
+
+#define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, common)
+#define to_sh_desc(lh) container_of(lh, struct sh_desc, node)
+#define tx_to_sh_desc(tx) container_of(tx, struct sh_desc, async_tx)
+
+#endif /* __DMA_SHDMA_H */
static struct txx9dmac_desc *txx9dmac_last_child(struct txx9dmac_desc *desc)
{
- if (!list_empty(&desc->txd.tx_list))
- desc = list_entry(desc->txd.tx_list.prev,
- struct txx9dmac_desc, desc_node);
+ if (!list_empty(&desc->tx_list))
+ desc = list_entry(desc->tx_list.prev, typeof(*desc), desc_node);
return desc;
}
desc = kzalloc(sizeof(*desc), flags);
if (!desc)
return NULL;
+ INIT_LIST_HEAD(&desc->tx_list);
dma_async_tx_descriptor_init(&desc->txd, &dc->chan);
desc->txd.tx_submit = txx9dmac_tx_submit;
/* txd.flags will be overwritten in prep funcs */
struct txx9dmac_dev *ddev = dc->ddev;
struct txx9dmac_desc *child;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dma_sync_single_for_cpu(chan2parent(&dc->chan),
child->txd.phys, ddev->descsize,
DMA_TO_DEVICE);
txx9dmac_sync_desc_for_cpu(dc, desc);
spin_lock_bh(&dc->lock);
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&dc->chan),
"moving child desc %p to freelist\n",
child);
- list_splice_init(&desc->txd.tx_list, &dc->free_list);
+ list_splice_init(&desc->tx_list, &dc->free_list);
dev_vdbg(chan2dev(&dc->chan), "moving desc %p to freelist\n",
desc);
list_add(&desc->desc_node, &dc->free_list);
param = txd->callback_param;
txx9dmac_sync_desc_for_cpu(dc, desc);
- list_splice_init(&txd->tx_list, &dc->free_list);
+ list_splice_init(&desc->tx_list, &dc->free_list);
list_move(&desc->desc_node, &dc->free_list);
if (!ds) {
"Bad descriptor submitted for DMA! (cookie: %d)\n",
bad_desc->txd.cookie);
txx9dmac_dump_desc(dc, &bad_desc->hwdesc);
- list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &bad_desc->tx_list, desc_node)
txx9dmac_dump_desc(dc, &child->hwdesc);
/* Pretend the descriptor completed successfully */
txx9dmac_descriptor_complete(dc, bad_desc);
return;
}
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
if (desc_read_CHAR(dc, child) == chain) {
/* Currently in progress */
if (csr & TXX9_DMA_CSR_ABCHC)
dma_sync_single_for_device(chan2parent(&dc->chan),
prev->txd.phys, ddev->descsize,
DMA_TO_DEVICE);
- list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ list_add_tail(&desc->desc_node, &first->tx_list);
}
prev = desc;
}
prev->txd.phys,
ddev->descsize,
DMA_TO_DEVICE);
- list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ list_add_tail(&desc->desc_node, &first->tx_list);
}
prev = desc;
}
/* THEN values for driver housekeeping */
struct list_head desc_node ____cacheline_aligned;
+ struct list_head tx_list;
struct dma_async_tx_descriptor txd;
size_t len;
};
Support for error detection and correction on the Intel
3000 and 3010 server chipsets.
+config EDAC_I3200
+ tristate "Intel 3200"
+ depends on EDAC_MM_EDAC && PCI && X86 && EXPERIMENTAL
+ help
+ Support for error detection and correction on the Intel
+ 3200 and 3210 server chipsets.
+
config EDAC_X38
tristate "Intel X38"
depends on EDAC_MM_EDAC && PCI && X86
San Clemente MCH.
config EDAC_MPC85XX
- tristate "Freescale MPC85xx"
- depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
+ tristate "Freescale MPC83xx / MPC85xx"
+ depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
help
Support for error detection and correction on the Freescale
- MPC8560, MPC8540, MPC8548
+ MPC8349, MPC8560, MPC8540, MPC8548
config EDAC_MV64X60
tristate "Marvell MV64x60"
obj-$(CONFIG_EDAC_I82875P) += i82875p_edac.o
obj-$(CONFIG_EDAC_I82975X) += i82975x_edac.o
obj-$(CONFIG_EDAC_I3000) += i3000_edac.o
+obj-$(CONFIG_EDAC_I3200) += i3200_edac.o
obj-$(CONFIG_EDAC_X38) += x38_edac.o
obj-$(CONFIG_EDAC_I82860) += i82860_edac.o
obj-$(CONFIG_EDAC_R82600) += r82600_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
+
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdev->name)) {
cpc925_printk(KERN_ERR, "Unable to request mem region\n");
res = -EBUSY;
goto err1;
}
- vbase = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1);
+ vbase = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (!vbase) {
cpc925_printk(KERN_ERR, "Unable to ioremap device\n");
res = -ENOMEM;
cpc925_mc_exit(mci);
edac_mc_free(mci);
err2:
- devm_release_mem_region(&pdev->dev, r->start, r->end-r->start+1);
+ devm_release_mem_region(&pdev->dev, r->start, resource_size(r));
err1:
devres_release_group(&pdev->dev, cpc925_probe);
out:
edac_dev = container_of(head, struct edac_device_ctl_info, rcu);
INIT_LIST_HEAD(&edac_dev->link);
- complete(&edac_dev->removal_complete);
}
/*
*edac_device)
{
list_del_rcu(&edac_device->link);
-
- init_completion(&edac_device->removal_complete);
call_rcu(&edac_device->rcu, complete_edac_device_list_del);
- wait_for_completion(&edac_device->removal_complete);
+ rcu_barrier();
}
/*
mci = container_of(head, struct mem_ctl_info, rcu);
INIT_LIST_HEAD(&mci->link);
- complete(&mci->complete);
}
static void del_mc_from_global_list(struct mem_ctl_info *mci)
{
atomic_dec(&edac_handlers);
list_del_rcu(&mci->link);
- init_completion(&mci->complete);
call_rcu(&mci->rcu, complete_mc_list_del);
- wait_for_completion(&mci->complete);
+ rcu_barrier();
}
/**
pci = container_of(head, struct edac_pci_ctl_info, rcu);
INIT_LIST_HEAD(&pci->link);
- complete(&pci->complete);
}
/*
static void del_edac_pci_from_global_list(struct edac_pci_ctl_info *pci)
{
list_del_rcu(&pci->link);
- init_completion(&pci->complete);
call_rcu(&pci->rcu, complete_edac_pci_list_del);
- wait_for_completion(&pci->complete);
+ rcu_barrier();
}
#if 0
--- /dev/null
+/*
+ * Intel 3200/3210 Memory Controller kernel module
+ * Copyright (C) 2008-2009 Akamai Technologies, Inc.
+ * Portions by Hitoshi Mitake <h.mitake@gmail.com>.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/io.h>
+#include "edac_core.h"
+
+#define I3200_REVISION "1.1"
+
+#define EDAC_MOD_STR "i3200_edac"
+
+#define PCI_DEVICE_ID_INTEL_3200_HB 0x29f0
+
+#define I3200_RANKS 8
+#define I3200_RANKS_PER_CHANNEL 4
+#define I3200_CHANNELS 2
+
+/* Intel 3200 register addresses - device 0 function 0 - DRAM Controller */
+
+#define I3200_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */
+#define I3200_MCHBAR_HIGH 0x4c
+#define I3200_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */
+#define I3200_MMR_WINDOW_SIZE 16384
+
+#define I3200_TOM 0xa0 /* Top of Memory (16b)
+ *
+ * 15:10 reserved
+ * 9:0 total populated physical memory
+ */
+#define I3200_TOM_MASK 0x3ff /* bits 9:0 */
+#define I3200_TOM_SHIFT 26 /* 64MiB grain */
+
+#define I3200_ERRSTS 0xc8 /* Error Status Register (16b)
+ *
+ * 15 reserved
+ * 14 Isochronous TBWRR Run Behind FIFO Full
+ * (ITCV)
+ * 13 Isochronous TBWRR Run Behind FIFO Put
+ * (ITSTV)
+ * 12 reserved
+ * 11 MCH Thermal Sensor Event
+ * for SMI/SCI/SERR (GTSE)
+ * 10 reserved
+ * 9 LOCK to non-DRAM Memory Flag (LCKF)
+ * 8 reserved
+ * 7 DRAM Throttle Flag (DTF)
+ * 6:2 reserved
+ * 1 Multi-bit DRAM ECC Error Flag (DMERR)
+ * 0 Single-bit DRAM ECC Error Flag (DSERR)
+ */
+#define I3200_ERRSTS_UE 0x0002
+#define I3200_ERRSTS_CE 0x0001
+#define I3200_ERRSTS_BITS (I3200_ERRSTS_UE | I3200_ERRSTS_CE)
+
+
+/* Intel MMIO register space - device 0 function 0 - MMR space */
+
+#define I3200_C0DRB 0x200 /* Channel 0 DRAM Rank Boundary (16b x 4)
+ *
+ * 15:10 reserved
+ * 9:0 Channel 0 DRAM Rank Boundary Address
+ */
+#define I3200_C1DRB 0x600 /* Channel 1 DRAM Rank Boundary (16b x 4) */
+#define I3200_DRB_MASK 0x3ff /* bits 9:0 */
+#define I3200_DRB_SHIFT 26 /* 64MiB grain */
+
+#define I3200_C0ECCERRLOG 0x280 /* Channel 0 ECC Error Log (64b)
+ *
+ * 63:48 Error Column Address (ERRCOL)
+ * 47:32 Error Row Address (ERRROW)
+ * 31:29 Error Bank Address (ERRBANK)
+ * 28:27 Error Rank Address (ERRRANK)
+ * 26:24 reserved
+ * 23:16 Error Syndrome (ERRSYND)
+ * 15: 2 reserved
+ * 1 Multiple Bit Error Status (MERRSTS)
+ * 0 Correctable Error Status (CERRSTS)
+ */
+#define I3200_C1ECCERRLOG 0x680 /* Chan 1 ECC Error Log (64b) */
+#define I3200_ECCERRLOG_CE 0x1
+#define I3200_ECCERRLOG_UE 0x2
+#define I3200_ECCERRLOG_RANK_BITS 0x18000000
+#define I3200_ECCERRLOG_RANK_SHIFT 27
+#define I3200_ECCERRLOG_SYNDROME_BITS 0xff0000
+#define I3200_ECCERRLOG_SYNDROME_SHIFT 16
+#define I3200_CAPID0 0xe0 /* P.95 of spec for details */
+
+struct i3200_priv {
+ void __iomem *window;
+};
+
+static int nr_channels;
+
+static int how_many_channels(struct pci_dev *pdev)
+{
+ unsigned char capid0_8b; /* 8th byte of CAPID0 */
+
+ pci_read_config_byte(pdev, I3200_CAPID0 + 8, &capid0_8b);
+ if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */
+ debugf0("In single channel mode.\n");
+ return 1;
+ } else {
+ debugf0("In dual channel mode.\n");
+ return 2;
+ }
+}
+
+static unsigned long eccerrlog_syndrome(u64 log)
+{
+ return (log & I3200_ECCERRLOG_SYNDROME_BITS) >>
+ I3200_ECCERRLOG_SYNDROME_SHIFT;
+}
+
+static int eccerrlog_row(int channel, u64 log)
+{
+ u64 rank = ((log & I3200_ECCERRLOG_RANK_BITS) >>
+ I3200_ECCERRLOG_RANK_SHIFT);
+ return rank | (channel * I3200_RANKS_PER_CHANNEL);
+}
+
+enum i3200_chips {
+ I3200 = 0,
+};
+
+struct i3200_dev_info {
+ const char *ctl_name;
+};
+
+struct i3200_error_info {
+ u16 errsts;
+ u16 errsts2;
+ u64 eccerrlog[I3200_CHANNELS];
+};
+
+static const struct i3200_dev_info i3200_devs[] = {
+ [I3200] = {
+ .ctl_name = "i3200"
+ },
+};
+
+static struct pci_dev *mci_pdev;
+static int i3200_registered = 1;
+
+
+static void i3200_clear_error_info(struct mem_ctl_info *mci)
+{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * Clear any error bits.
+ * (Yes, we really clear bits by writing 1 to them.)
+ */
+ pci_write_bits16(pdev, I3200_ERRSTS, I3200_ERRSTS_BITS,
+ I3200_ERRSTS_BITS);
+}
+
+static void i3200_get_and_clear_error_info(struct mem_ctl_info *mci,
+ struct i3200_error_info *info)
+{
+ struct pci_dev *pdev;
+ struct i3200_priv *priv = mci->pvt_info;
+ void __iomem *window = priv->window;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * This is a mess because there is no atomic way to read all the
+ * registers at once and the registers can transition from CE being
+ * overwritten by UE.
+ */
+ pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts);
+ if (!(info->errsts & I3200_ERRSTS_BITS))
+ return;
+
+ info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG);
+ if (nr_channels == 2)
+ info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG);
+
+ pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts2);
+
+ /*
+ * If the error is the same for both reads then the first set
+ * of reads is valid. If there is a change then there is a CE
+ * with no info and the second set of reads is valid and
+ * should be UE info.
+ */
+ if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) {
+ info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG);
+ if (nr_channels == 2)
+ info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG);
+ }
+
+ i3200_clear_error_info(mci);
+}
+
+static void i3200_process_error_info(struct mem_ctl_info *mci,
+ struct i3200_error_info *info)
+{
+ int channel;
+ u64 log;
+
+ if (!(info->errsts & I3200_ERRSTS_BITS))
+ return;
+
+ if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) {
+ edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
+ info->errsts = info->errsts2;
+ }
+
+ for (channel = 0; channel < nr_channels; channel++) {
+ log = info->eccerrlog[channel];
+ if (log & I3200_ECCERRLOG_UE) {
+ edac_mc_handle_ue(mci, 0, 0,
+ eccerrlog_row(channel, log),
+ "i3200 UE");
+ } else if (log & I3200_ECCERRLOG_CE) {
+ edac_mc_handle_ce(mci, 0, 0,
+ eccerrlog_syndrome(log),
+ eccerrlog_row(channel, log), 0,
+ "i3200 CE");
+ }
+ }
+}
+
+static void i3200_check(struct mem_ctl_info *mci)
+{
+ struct i3200_error_info info;
+
+ debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ i3200_get_and_clear_error_info(mci, &info);
+ i3200_process_error_info(mci, &info);
+}
+
+
+void __iomem *i3200_map_mchbar(struct pci_dev *pdev)
+{
+ union {
+ u64 mchbar;
+ struct {
+ u32 mchbar_low;
+ u32 mchbar_high;
+ };
+ } u;
+ void __iomem *window;
+
+ pci_read_config_dword(pdev, I3200_MCHBAR_LOW, &u.mchbar_low);
+ pci_read_config_dword(pdev, I3200_MCHBAR_HIGH, &u.mchbar_high);
+ u.mchbar &= I3200_MCHBAR_MASK;
+
+ if (u.mchbar != (resource_size_t)u.mchbar) {
+ printk(KERN_ERR
+ "i3200: mmio space beyond accessible range (0x%llx)\n",
+ (unsigned long long)u.mchbar);
+ return NULL;
+ }
+
+ window = ioremap_nocache(u.mchbar, I3200_MMR_WINDOW_SIZE);
+ if (!window)
+ printk(KERN_ERR "i3200: cannot map mmio space at 0x%llx\n",
+ (unsigned long long)u.mchbar);
+
+ return window;
+}
+
+
+static void i3200_get_drbs(void __iomem *window,
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL])
+{
+ int i;
+
+ for (i = 0; i < I3200_RANKS_PER_CHANNEL; i++) {
+ drbs[0][i] = readw(window + I3200_C0DRB + 2*i) & I3200_DRB_MASK;
+ drbs[1][i] = readw(window + I3200_C1DRB + 2*i) & I3200_DRB_MASK;
+ }
+}
+
+static bool i3200_is_stacked(struct pci_dev *pdev,
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL])
+{
+ u16 tom;
+
+ pci_read_config_word(pdev, I3200_TOM, &tom);
+ tom &= I3200_TOM_MASK;
+
+ return drbs[I3200_CHANNELS - 1][I3200_RANKS_PER_CHANNEL - 1] == tom;
+}
+
+static unsigned long drb_to_nr_pages(
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL], bool stacked,
+ int channel, int rank)
+{
+ int n;
+
+ n = drbs[channel][rank];
+ if (rank > 0)
+ n -= drbs[channel][rank - 1];
+ if (stacked && (channel == 1) &&
+ drbs[channel][rank] == drbs[channel][I3200_RANKS_PER_CHANNEL - 1])
+ n -= drbs[0][I3200_RANKS_PER_CHANNEL - 1];
+
+ n <<= (I3200_DRB_SHIFT - PAGE_SHIFT);
+ return n;
+}
+
+static int i3200_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc;
+ int i;
+ struct mem_ctl_info *mci = NULL;
+ unsigned long last_page;
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL];
+ bool stacked;
+ void __iomem *window;
+ struct i3200_priv *priv;
+
+ debugf0("MC: %s()\n", __func__);
+
+ window = i3200_map_mchbar(pdev);
+ if (!window)
+ return -ENODEV;
+
+ i3200_get_drbs(window, drbs);
+ nr_channels = how_many_channels(pdev);
+
+ mci = edac_mc_alloc(sizeof(struct i3200_priv), I3200_RANKS,
+ nr_channels, 0);
+ if (!mci)
+ return -ENOMEM;
+
+ debugf3("MC: %s(): init mci\n", __func__);
+
+ mci->dev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR2;
+
+ mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = I3200_REVISION;
+ mci->ctl_name = i3200_devs[dev_idx].ctl_name;
+ mci->dev_name = pci_name(pdev);
+ mci->edac_check = i3200_check;
+ mci->ctl_page_to_phys = NULL;
+ priv = mci->pvt_info;
+ priv->window = window;
+
+ stacked = i3200_is_stacked(pdev, drbs);
+
+ /*
+ * The dram rank boundary (DRB) reg values are boundary addresses
+ * for each DRAM rank with a granularity of 64MB. DRB regs are
+ * cumulative; the last one will contain the total memory
+ * contained in all ranks.
+ */
+ last_page = -1UL;
+ for (i = 0; i < mci->nr_csrows; i++) {
+ unsigned long nr_pages;
+ struct csrow_info *csrow = &mci->csrows[i];
+
+ nr_pages = drb_to_nr_pages(drbs, stacked,
+ i / I3200_RANKS_PER_CHANNEL,
+ i % I3200_RANKS_PER_CHANNEL);
+
+ if (nr_pages == 0) {
+ csrow->mtype = MEM_EMPTY;
+ continue;
+ }
+
+ csrow->first_page = last_page + 1;
+ last_page += nr_pages;
+ csrow->last_page = last_page;
+ csrow->nr_pages = nr_pages;
+
+ csrow->grain = nr_pages << PAGE_SHIFT;
+ csrow->mtype = MEM_DDR2;
+ csrow->dtype = DEV_UNKNOWN;
+ csrow->edac_mode = EDAC_UNKNOWN;
+ }
+
+ i3200_clear_error_info(mci);
+
+ rc = -ENODEV;
+ if (edac_mc_add_mc(mci)) {
+ debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail;
+ }
+
+ /* get this far and it's successful */
+ debugf3("MC: %s(): success\n", __func__);
+ return 0;
+
+fail:
+ iounmap(window);
+ if (mci)
+ edac_mc_free(mci);
+
+ return rc;
+}
+
+static int __devinit i3200_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ debugf0("MC: %s()\n", __func__);
+
+ if (pci_enable_device(pdev) < 0)
+ return -EIO;
+
+ rc = i3200_probe1(pdev, ent->driver_data);
+ if (!mci_pdev)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void __devexit i3200_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct i3200_priv *priv;
+
+ debugf0("%s()\n", __func__);
+
+ mci = edac_mc_del_mc(&pdev->dev);
+ if (!mci)
+ return;
+
+ priv = mci->pvt_info;
+ iounmap(priv->window);
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id i3200_pci_tbl[] __devinitdata = {
+ {
+ PCI_VEND_DEV(INTEL, 3200_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ I3200},
+ {
+ 0,
+ } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i3200_pci_tbl);
+
+static struct pci_driver i3200_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = i3200_init_one,
+ .remove = __devexit_p(i3200_remove_one),
+ .id_table = i3200_pci_tbl,
+};
+
+static int __init i3200_init(void)
+{
+ int pci_rc;
+
+ debugf3("MC: %s()\n", __func__);
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ pci_rc = pci_register_driver(&i3200_driver);
+ if (pci_rc < 0)
+ goto fail0;
+
+ if (!mci_pdev) {
+ i3200_registered = 0;
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_3200_HB, NULL);
+ if (!mci_pdev) {
+ debugf0("i3200 pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = i3200_init_one(mci_pdev, i3200_pci_tbl);
+ if (pci_rc < 0) {
+ debugf0("i3200 init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&i3200_driver);
+
+fail0:
+ if (mci_pdev)
+ pci_dev_put(mci_pdev);
+
+ return pci_rc;
+}
+
+static void __exit i3200_exit(void)
+{
+ debugf3("MC: %s()\n", __func__);
+
+ pci_unregister_driver(&i3200_driver);
+ if (!i3200_registered) {
+ i3200_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+ }
+}
+
+module_init(i3200_init);
+module_exit(i3200_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Akamai Technologies, Inc.");
+MODULE_DESCRIPTION("MC support for Intel 3200 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
#endif
static u32 orig_l2_err_disable;
+#ifdef CONFIG_MPC85xx
static u32 orig_hid1[2];
+#endif
/************************ MC SYSFS parts ***********************************/
{ .compatible = "fsl,mpc8560-l2-cache-controller", },
{ .compatible = "fsl,mpc8568-l2-cache-controller", },
{ .compatible = "fsl,mpc8572-l2-cache-controller", },
+ { .compatible = "fsl,p2020-l2-cache-controller", },
{},
};
csrow = &mci->csrows[index];
cs_bnds = in_be32(pdata->mc_vbase + MPC85XX_MC_CS_BNDS_0 +
(index * MPC85XX_MC_CS_BNDS_OFS));
- start = (cs_bnds & 0xfff0000) << 4;
- end = ((cs_bnds & 0xfff) << 20);
- if (start)
- start |= 0xfffff;
- if (end)
- end |= 0xfffff;
+
+ start = (cs_bnds & 0xffff0000) >> 16;
+ end = (cs_bnds & 0x0000ffff);
if (start == end)
continue; /* not populated */
+ start <<= (24 - PAGE_SHIFT);
+ end <<= (24 - PAGE_SHIFT);
+ end |= (1 << (24 - PAGE_SHIFT)) - 1;
+
csrow->first_page = start >> PAGE_SHIFT;
csrow->last_page = end >> PAGE_SHIFT;
- csrow->nr_pages = csrow->last_page + 1 - csrow->first_page;
+ csrow->nr_pages = end + 1 - start;
csrow->grain = 8;
csrow->mtype = mtype;
csrow->dtype = DEV_UNKNOWN;
{ .compatible = "fsl,mpc8560-memory-controller", },
{ .compatible = "fsl,mpc8568-memory-controller", },
{ .compatible = "fsl,mpc8572-memory-controller", },
+ { .compatible = "fsl,mpc8349-memory-controller", },
+ { .compatible = "fsl,p2020-memory-controller", },
{},
};
},
};
-
+#ifdef CONFIG_MPC85xx
static void __init mpc85xx_mc_clear_rfxe(void *data)
{
orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1);
mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~0x20000));
}
-
+#endif
static int __init mpc85xx_mc_init(void)
{
printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n");
#endif
+#ifdef CONFIG_MPC85xx
/*
* need to clear HID1[RFXE] to disable machine check int
* so we can catch it
*/
if (edac_op_state == EDAC_OPSTATE_INT)
on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0);
+#endif
return 0;
}
module_init(mpc85xx_mc_init);
+#ifdef CONFIG_MPC85xx
static void __exit mpc85xx_mc_restore_hid1(void *data)
{
mtspr(SPRN_HID1, orig_hid1[smp_processor_id()]);
}
+#endif
static void __exit mpc85xx_mc_exit(void)
{
+#ifdef CONFIG_MPC85xx
on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
+#endif
#ifdef CONFIG_PCI
of_unregister_platform_driver(&mpc85xx_pci_err_driver);
#endif
return -ENOENT;
}
- pci_serr = ioremap(r->start, r->end - r->start + 1);
+ pci_serr = ioremap(r->start, resource_size(r));
if (!pci_serr)
return -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->pci_vbase = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->pci_vbase) {
printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
res = -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while request mem region\n",
__func__);
pdata->sram_vbase = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->sram_vbase) {
printk(KERN_ERR "%s: Unable to setup SRAM err regs\n",
__func__);
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->cpu_vbase[0] = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->cpu_vbase[0]) {
printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__);
res = -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->cpu_vbase[1] = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->cpu_vbase[1]) {
printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__);
res = -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->mc_vbase = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->mc_vbase) {
printk(KERN_ERR "%s: Unable to setup MC err regs\n", __func__);
res = -ENOMEM;
select BACKLIGHT_CLASS_DEVICE if ACPI
select INPUT if ACPI
select ACPI_VIDEO if ACPI
+ select ACPI_BUTTON if ACPI
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
if (IS_ERR(obj->filp))
goto free;
+ /* Basically we want to disable the OOM killer and handle ENOMEM
+ * ourselves by sacrificing pages from cached buffers.
+ * XXX shmem_file_[gs]et_gfp_mask()
+ */
+ mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping,
+ GFP_HIGHUSER |
+ __GFP_COLD |
+ __GFP_FS |
+ __GFP_RECLAIMABLE |
+ __GFP_NORETRY |
+ __GFP_NOWARN |
+ __GFP_NOMEMALLOC);
+
kref_init(&obj->refcount);
kref_init(&obj->handlecount);
obj->size = size;
i915_gem.o \
i915_gem_debug.o \
i915_gem_tiling.o \
+ i915_trace_points.o \
intel_display.o \
intel_crt.o \
intel_lvds.o \
{
struct drm_gem_object *obj = obj_priv->obj;
- seq_printf(m, " %p: %s %08x %08x %d",
+ seq_printf(m, " %p: %s %8zd %08x %08x %d %s",
obj,
get_pin_flag(obj_priv),
+ obj->size,
obj->read_domains, obj->write_domain,
- obj_priv->last_rendering_seqno);
+ obj_priv->last_rendering_seqno,
+ obj_priv->dirty ? "dirty" : "");
if (obj->name)
seq_printf(m, " (name: %d)", obj->name);
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "i915_trace.h"
#include <linux/vgaarb.h>
/* Really want an OS-independent resettable timer. Would like to have
u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
int i;
+ trace_i915_ring_wait_begin (dev);
+
for (i = 0; i < 100000; i++) {
ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
acthd = I915_READ(acthd_reg);
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->Size;
- if (ring->space >= n)
+ if (ring->space >= n) {
+ trace_i915_ring_wait_end (dev);
return 0;
+ }
if (dev->primary->master) {
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
}
+ trace_i915_ring_wait_end (dev);
return -EBUSY;
}
* how much was set aside so we can use it for our own purposes.
*/
static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size,
- uint32_t *preallocated_size)
+ uint32_t *preallocated_size,
+ uint32_t *start)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u16 tmp = 0;
return -1;
}
*preallocated_size = stolen - overhead;
+ *start = overhead;
return 0;
}
+#define PTE_ADDRESS_MASK 0xfffff000
+#define PTE_ADDRESS_MASK_HIGH 0x000000f0 /* i915+ */
+#define PTE_MAPPING_TYPE_UNCACHED (0 << 1)
+#define PTE_MAPPING_TYPE_DCACHE (1 << 1) /* i830 only */
+#define PTE_MAPPING_TYPE_CACHED (3 << 1)
+#define PTE_MAPPING_TYPE_MASK (3 << 1)
+#define PTE_VALID (1 << 0)
+
+/**
+ * i915_gtt_to_phys - take a GTT address and turn it into a physical one
+ * @dev: drm device
+ * @gtt_addr: address to translate
+ *
+ * Some chip functions require allocations from stolen space but need the
+ * physical address of the memory in question. We use this routine
+ * to get a physical address suitable for register programming from a given
+ * GTT address.
+ */
+static unsigned long i915_gtt_to_phys(struct drm_device *dev,
+ unsigned long gtt_addr)
+{
+ unsigned long *gtt;
+ unsigned long entry, phys;
+ int gtt_bar = IS_I9XX(dev) ? 0 : 1;
+ int gtt_offset, gtt_size;
+
+ if (IS_I965G(dev)) {
+ if (IS_G4X(dev) || IS_IGDNG(dev)) {
+ gtt_offset = 2*1024*1024;
+ gtt_size = 2*1024*1024;
+ } else {
+ gtt_offset = 512*1024;
+ gtt_size = 512*1024;
+ }
+ } else {
+ gtt_bar = 3;
+ gtt_offset = 0;
+ gtt_size = pci_resource_len(dev->pdev, gtt_bar);
+ }
+
+ gtt = ioremap_wc(pci_resource_start(dev->pdev, gtt_bar) + gtt_offset,
+ gtt_size);
+ if (!gtt) {
+ DRM_ERROR("ioremap of GTT failed\n");
+ return 0;
+ }
+
+ entry = *(volatile u32 *)(gtt + (gtt_addr / 1024));
+
+ DRM_DEBUG("GTT addr: 0x%08lx, PTE: 0x%08lx\n", gtt_addr, entry);
+
+ /* Mask out these reserved bits on this hardware. */
+ if (!IS_I9XX(dev) || IS_I915G(dev) || IS_I915GM(dev) ||
+ IS_I945G(dev) || IS_I945GM(dev)) {
+ entry &= ~PTE_ADDRESS_MASK_HIGH;
+ }
+
+ /* If it's not a mapping type we know, then bail. */
+ if ((entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_UNCACHED &&
+ (entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_CACHED) {
+ iounmap(gtt);
+ return 0;
+ }
+
+ if (!(entry & PTE_VALID)) {
+ DRM_ERROR("bad GTT entry in stolen space\n");
+ iounmap(gtt);
+ return 0;
+ }
+
+ iounmap(gtt);
+
+ phys =(entry & PTE_ADDRESS_MASK) |
+ ((uint64_t)(entry & PTE_ADDRESS_MASK_HIGH) << (32 - 4));
+
+ DRM_DEBUG("GTT addr: 0x%08lx, phys addr: 0x%08lx\n", gtt_addr, phys);
+
+ return phys;
+}
+
+static void i915_warn_stolen(struct drm_device *dev)
+{
+ DRM_ERROR("not enough stolen space for compressed buffer, disabling\n");
+ DRM_ERROR("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
+}
+
+static void i915_setup_compression(struct drm_device *dev, int size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_mm_node *compressed_fb, *compressed_llb;
+ unsigned long cfb_base, ll_base;
+
+ /* Leave 1M for line length buffer & misc. */
+ compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0);
+ if (!compressed_fb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ compressed_fb = drm_mm_get_block(compressed_fb, size, 4096);
+ if (!compressed_fb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ cfb_base = i915_gtt_to_phys(dev, compressed_fb->start);
+ if (!cfb_base) {
+ DRM_ERROR("failed to get stolen phys addr, disabling FBC\n");
+ drm_mm_put_block(compressed_fb);
+ }
+
+ if (!IS_GM45(dev)) {
+ compressed_llb = drm_mm_search_free(&dev_priv->vram, 4096,
+ 4096, 0);
+ if (!compressed_llb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ compressed_llb = drm_mm_get_block(compressed_llb, 4096, 4096);
+ if (!compressed_llb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ ll_base = i915_gtt_to_phys(dev, compressed_llb->start);
+ if (!ll_base) {
+ DRM_ERROR("failed to get stolen phys addr, disabling FBC\n");
+ drm_mm_put_block(compressed_fb);
+ drm_mm_put_block(compressed_llb);
+ }
+ }
+
+ dev_priv->cfb_size = size;
+
+ if (IS_GM45(dev)) {
+ g4x_disable_fbc(dev);
+ I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
+ } else {
+ i8xx_disable_fbc(dev);
+ I915_WRITE(FBC_CFB_BASE, cfb_base);
+ I915_WRITE(FBC_LL_BASE, ll_base);
+ }
+
+ DRM_DEBUG("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base,
+ ll_base, size >> 20);
+}
+
/* true = enable decode, false = disable decoder */
static unsigned int i915_vga_set_decode(void *cookie, bool state)
{
}
static int i915_load_modeset_init(struct drm_device *dev,
+ unsigned long prealloc_start,
unsigned long prealloc_size,
unsigned long agp_size)
{
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
+ DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
+
+ /* We're off and running w/KMS */
+ dev_priv->mm.suspended = 0;
/* Let GEM Manage from end of prealloc space to end of aperture.
*
*/
i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
+ mutex_lock(&dev->struct_mutex);
ret = i915_gem_init_ringbuffer(dev);
+ mutex_unlock(&dev->struct_mutex);
if (ret)
goto out;
+ /* Try to set up FBC with a reasonable compressed buffer size */
+ if (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev) || IS_GM45(dev)) &&
+ i915_powersave) {
+ int cfb_size;
+
+ /* Try to get an 8M buffer... */
+ if (prealloc_size > (9*1024*1024))
+ cfb_size = 8*1024*1024;
+ else /* fall back to 7/8 of the stolen space */
+ cfb_size = prealloc_size * 7 / 8;
+ i915_setup_compression(dev, cfb_size);
+ }
+
/* Allow hardware batchbuffers unless told otherwise.
*/
dev_priv->allow_batchbuffer = 1;
struct drm_i915_private *dev_priv = dev->dev_private;
resource_size_t base, size;
int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
- uint32_t agp_size, prealloc_size;
+ uint32_t agp_size, prealloc_size, prealloc_start;
/* i915 has 4 more counters */
dev->counters += 4;
"performance may suffer.\n");
}
- ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
+ ret = i915_probe_agp(dev, &agp_size, &prealloc_size, &prealloc_start);
if (ret)
goto out_iomapfree;
return ret;
}
+ /* Start out suspended */
+ dev_priv->mm.suspended = 1;
+
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
+ ret = i915_load_modeset_init(dev, prealloc_start,
+ prealloc_size, agp_size);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_workqueue_free;
if (!IS_IGDNG(dev))
intel_opregion_init(dev, 0);
+ setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
+ (unsigned long) dev);
return 0;
out_workqueue_free:
struct drm_i915_private *dev_priv = dev->dev_private;
destroy_workqueue(dev_priv->wq);
+ del_timer_sync(&dev_priv->hangcheck_timer);
io_mapping_free(dev_priv->mm.gtt_mapping);
if (dev_priv->mm.gtt_mtrr >= 0) {
DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
+ DRM_IOCTL_DEF(DRM_I915_GEM_MADVISE, i915_gem_madvise_ioctl, 0),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
+ dev_priv->suspended = 1;
+
return 0;
}
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;
- pci_set_power_state(dev->pdev, PCI_D0);
- pci_restore_state(dev->pdev);
if (pci_enable_device(dev->pdev))
return -1;
pci_set_master(dev->pdev);
drm_helper_resume_force_mode(dev);
}
+ dev_priv->suspended = 0;
+
return ret;
}
+/**
+ * i965_reset - reset chip after a hang
+ * @dev: drm device to reset
+ * @flags: reset domains
+ *
+ * Reset the chip. Useful if a hang is detected. Returns zero on successful
+ * reset or otherwise an error code.
+ *
+ * Procedure is fairly simple:
+ * - reset the chip using the reset reg
+ * - re-init context state
+ * - re-init hardware status page
+ * - re-init ring buffer
+ * - re-init interrupt state
+ * - re-init display
+ */
+int i965_reset(struct drm_device *dev, u8 flags)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned long timeout;
+ u8 gdrst;
+ /*
+ * We really should only reset the display subsystem if we actually
+ * need to
+ */
+ bool need_display = true;
+
+ mutex_lock(&dev->struct_mutex);
+
+ /*
+ * Clear request list
+ */
+ i915_gem_retire_requests(dev);
+
+ if (need_display)
+ i915_save_display(dev);
+
+ if (IS_I965G(dev) || IS_G4X(dev)) {
+ /*
+ * Set the domains we want to reset, then the reset bit (bit 0).
+ * Clear the reset bit after a while and wait for hardware status
+ * bit (bit 1) to be set
+ */
+ pci_read_config_byte(dev->pdev, GDRST, &gdrst);
+ pci_write_config_byte(dev->pdev, GDRST, gdrst | flags | ((flags == GDRST_FULL) ? 0x1 : 0x0));
+ udelay(50);
+ pci_write_config_byte(dev->pdev, GDRST, gdrst & 0xfe);
+
+ /* ...we don't want to loop forever though, 500ms should be plenty */
+ timeout = jiffies + msecs_to_jiffies(500);
+ do {
+ udelay(100);
+ pci_read_config_byte(dev->pdev, GDRST, &gdrst);
+ } while ((gdrst & 0x1) && time_after(timeout, jiffies));
+
+ if (gdrst & 0x1) {
+ WARN(true, "i915: Failed to reset chip\n");
+ mutex_unlock(&dev->struct_mutex);
+ return -EIO;
+ }
+ } else {
+ DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
+ return -ENODEV;
+ }
+
+ /* Ok, now get things going again... */
+
+ /*
+ * Everything depends on having the GTT running, so we need to start
+ * there. Fortunately we don't need to do this unless we reset the
+ * chip at a PCI level.
+ *
+ * Next we need to restore the context, but we don't use those
+ * yet either...
+ *
+ * Ring buffer needs to be re-initialized in the KMS case, or if X
+ * was running at the time of the reset (i.e. we weren't VT
+ * switched away).
+ */
+ if (drm_core_check_feature(dev, DRIVER_MODESET) ||
+ !dev_priv->mm.suspended) {
+ drm_i915_ring_buffer_t *ring = &dev_priv->ring;
+ struct drm_gem_object *obj = ring->ring_obj;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ dev_priv->mm.suspended = 0;
+
+ /* Stop the ring if it's running. */
+ I915_WRITE(PRB0_CTL, 0);
+ I915_WRITE(PRB0_TAIL, 0);
+ I915_WRITE(PRB0_HEAD, 0);
+
+ /* Initialize the ring. */
+ I915_WRITE(PRB0_START, obj_priv->gtt_offset);
+ I915_WRITE(PRB0_CTL,
+ ((obj->size - 4096) & RING_NR_PAGES) |
+ RING_NO_REPORT |
+ RING_VALID);
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kernel_lost_context(dev);
+ else {
+ ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+ ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->Size;
+ }
+
+ mutex_unlock(&dev->struct_mutex);
+ drm_irq_uninstall(dev);
+ drm_irq_install(dev);
+ mutex_lock(&dev->struct_mutex);
+ }
+
+ /*
+ * Display needs restore too...
+ */
+ if (need_display)
+ i915_restore_display(dev);
+
+ mutex_unlock(&dev->struct_mutex);
+ return 0;
+}
+
+
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
{
driver.num_ioctls = i915_max_ioctl;
+ i915_gem_shrinker_init();
+
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
static void __exit i915_exit(void)
{
+ i915_gem_shrinker_exit();
drm_exit(&driver);
}
PIPE_B,
};
+enum plane {
+ PLANE_A = 0,
+ PLANE_B,
+};
+
#define I915_NUM_PIPE 2
/* Interface history:
struct timeval time;
};
+struct drm_i915_display_funcs {
+ void (*dpms)(struct drm_crtc *crtc, int mode);
+ bool (*fbc_enabled)(struct drm_crtc *crtc);
+ void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
+ void (*disable_fbc)(struct drm_device *dev);
+ int (*get_display_clock_speed)(struct drm_device *dev);
+ int (*get_fifo_size)(struct drm_device *dev, int plane);
+ void (*update_wm)(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size);
+ /* clock updates for mode set */
+ /* cursor updates */
+ /* render clock increase/decrease */
+ /* display clock increase/decrease */
+ /* pll clock increase/decrease */
+ /* clock gating init */
+};
+
typedef struct drm_i915_private {
struct drm_device *dev;
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
+ /* For hangcheck timer */
+#define DRM_I915_HANGCHECK_PERIOD 75 /* in jiffies */
+ struct timer_list hangcheck_timer;
+ int hangcheck_count;
+ uint32_t last_acthd;
+
bool cursor_needs_physical;
struct drm_mm vram;
+ unsigned long cfb_size;
+ unsigned long cfb_pitch;
+ int cfb_fence;
+ int cfb_plane;
+
int irq_enabled;
struct intel_opregion opregion;
unsigned int edp_support:1;
int lvds_ssc_freq;
+ struct notifier_block lid_notifier;
+
int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
struct work_struct error_work;
struct workqueue_struct *wq;
+ /* Display functions */
+ struct drm_i915_display_funcs display;
+
/* Register state */
+ bool suspended;
u8 saveLBB;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
struct io_mapping *gtt_mapping;
int gtt_mtrr;
+ /**
+ * Membership on list of all loaded devices, used to evict
+ * inactive buffers under memory pressure.
+ *
+ * Modifications should only be done whilst holding the
+ * shrink_list_lock spinlock.
+ */
+ struct list_head shrink_list;
+
/**
* List of objects currently involved in rendering from the
* ringbuffer.
* It prevents command submission from occuring and makes
* every pending request fail
*/
- int wedged;
+ atomic_t wedged;
/** Bit 6 swizzling required for X tiling */
uint32_t bit_6_swizzle_x;
* This is the same as gtt_space->start
*/
uint32_t gtt_offset;
- /**
- * Required alignment for the object
- */
- uint32_t gtt_alignment;
+
/**
* Fake offset for use by mmap(2)
*/
* in an execbuffer object list.
*/
int in_execbuffer;
+
+ /**
+ * Advice: are the backing pages purgeable?
+ */
+ int madv;
};
/**
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
+extern void i915_save_display(struct drm_device *dev);
+extern void i915_restore_display(struct drm_device *dev);
extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
extern int i915_emit_box(struct drm_device *dev,
struct drm_clip_rect *boxes,
int i, int DR1, int DR4);
+extern int i965_reset(struct drm_device *dev, u8 flags);
/* i915_irq.c */
+void i915_hangcheck_elapsed(unsigned long data);
extern int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
int i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
void i915_gem_release_mmap(struct drm_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
uint32_t i915_get_gem_seqno(struct drm_device *dev);
+bool i915_seqno_passed(uint32_t seq1, uint32_t seq2);
int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
int i915_gem_object_put_fence_reg(struct drm_gem_object *obj);
void i915_gem_retire_requests(struct drm_device *dev);
void i915_gem_object_put_pages(struct drm_gem_object *obj);
void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
+void i915_gem_shrinker_init(void);
+void i915_gem_shrinker_exit(void);
+
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
extern void intel_modeset_init(struct drm_device *dev);
extern void intel_modeset_cleanup(struct drm_device *dev);
extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
+extern void i8xx_disable_fbc(struct drm_device *dev);
+extern void g4x_disable_fbc(struct drm_device *dev);
/**
* Lock test for when it's just for synchronization of ring access.
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22 || \
(dev)->pci_device == 0x2E32 || \
+ (dev)->pci_device == 0x2E42 || \
(dev)->pci_device == 0x0042 || \
(dev)->pci_device == 0x0046)
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22 || \
(dev)->pci_device == 0x2E32 || \
+ (dev)->pci_device == 0x2E42 || \
IS_GM45(dev))
#define IS_IGDG(dev) ((dev)->pci_device == 0xa001)
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define SUPPORTS_EDP(dev) (IS_IGDNG_M(dev))
-#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
+#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev))
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev))
#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev)))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "i915_trace.h"
#include "intel_drv.h"
#include <linux/swap.h>
#include <linux/pci.h>
static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
unsigned alignment);
static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
-static int i915_gem_evict_something(struct drm_device *dev);
+static int i915_gem_evict_something(struct drm_device *dev, int min_size);
+static int i915_gem_evict_from_inactive_list(struct drm_device *dev);
static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv);
+static LIST_HEAD(shrink_list);
+static DEFINE_SPINLOCK(shrink_list_lock);
+
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
unsigned long end)
{
return ret;
}
+static inline gfp_t
+i915_gem_object_get_page_gfp_mask (struct drm_gem_object *obj)
+{
+ return mapping_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping);
+}
+
+static inline void
+i915_gem_object_set_page_gfp_mask (struct drm_gem_object *obj, gfp_t gfp)
+{
+ mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, gfp);
+}
+
+static int
+i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj)
+{
+ int ret;
+
+ ret = i915_gem_object_get_pages(obj);
+
+ /* If we've insufficient memory to map in the pages, attempt
+ * to make some space by throwing out some old buffers.
+ */
+ if (ret == -ENOMEM) {
+ struct drm_device *dev = obj->dev;
+ gfp_t gfp;
+
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret)
+ return ret;
+
+ gfp = i915_gem_object_get_page_gfp_mask(obj);
+ i915_gem_object_set_page_gfp_mask(obj, gfp & ~__GFP_NORETRY);
+ ret = i915_gem_object_get_pages(obj);
+ i915_gem_object_set_page_gfp_mask (obj, gfp);
+ }
+
+ return ret;
+}
+
/**
* This is the fallback shmem pread path, which allocates temporary storage
* in kernel space to copy_to_user into outside of the struct_mutex, so we
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
- if (ret != 0)
+ ret = i915_gem_object_get_pages_or_evict(obj);
+ if (ret)
goto fail_unlock;
ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset,
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
- if (ret != 0)
+ ret = i915_gem_object_get_pages_or_evict(obj);
+ if (ret)
goto fail_unlock;
ret = i915_gem_object_set_to_cpu_domain(obj, 1);
/* Now bind it into the GTT if needed */
mutex_lock(&dev->struct_mutex);
if (!obj_priv->gtt_space) {
- ret = i915_gem_object_bind_to_gtt(obj, obj_priv->gtt_alignment);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
-
- ret = i915_gem_object_set_to_gtt_domain(obj, write);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
+ ret = i915_gem_object_bind_to_gtt(obj, 0);
+ if (ret)
+ goto unlock;
list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret)
+ goto unlock;
}
/* Need a new fence register? */
if (obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
+ if (ret)
+ goto unlock;
}
pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) +
/* Finally, remap it using the new GTT offset */
ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
-
+unlock:
mutex_unlock(&dev->struct_mutex);
switch (ret) {
+ case 0:
+ case -ERESTARTSYS:
+ return VM_FAULT_NOPAGE;
case -ENOMEM:
case -EAGAIN:
return VM_FAULT_OOM;
- case -EFAULT:
- case -EINVAL:
- return VM_FAULT_SIGBUS;
default:
- return VM_FAULT_NOPAGE;
+ return VM_FAULT_SIGBUS;
}
}
obj_priv = obj->driver_private;
+ if (obj_priv->madv != I915_MADV_WILLNEED) {
+ DRM_ERROR("Attempting to mmap a purgeable buffer\n");
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
+ }
+
+
if (!obj_priv->mmap_offset) {
ret = i915_gem_create_mmap_offset(obj);
if (ret) {
args->offset = obj_priv->mmap_offset;
- obj_priv->gtt_alignment = i915_gem_get_gtt_alignment(obj);
-
- /* Make sure the alignment is correct for fence regs etc */
- if (obj_priv->agp_mem &&
- (obj_priv->gtt_offset & (obj_priv->gtt_alignment - 1))) {
- drm_gem_object_unreference(obj);
- mutex_unlock(&dev->struct_mutex);
- return -EINVAL;
- }
-
/*
* Pull it into the GTT so that we have a page list (makes the
* initial fault faster and any subsequent flushing possible).
*/
if (!obj_priv->agp_mem) {
- ret = i915_gem_object_bind_to_gtt(obj, obj_priv->gtt_alignment);
+ ret = i915_gem_object_bind_to_gtt(obj, 0);
if (ret) {
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
int i;
BUG_ON(obj_priv->pages_refcount == 0);
+ BUG_ON(obj_priv->madv == __I915_MADV_PURGED);
if (--obj_priv->pages_refcount != 0)
return;
if (obj_priv->tiling_mode != I915_TILING_NONE)
i915_gem_object_save_bit_17_swizzle(obj);
- for (i = 0; i < page_count; i++)
- if (obj_priv->pages[i] != NULL) {
- if (obj_priv->dirty)
- set_page_dirty(obj_priv->pages[i]);
+ if (obj_priv->madv == I915_MADV_DONTNEED)
+ obj_priv->dirty = 0;
+
+ for (i = 0; i < page_count; i++) {
+ if (obj_priv->pages[i] == NULL)
+ break;
+
+ if (obj_priv->dirty)
+ set_page_dirty(obj_priv->pages[i]);
+
+ if (obj_priv->madv == I915_MADV_WILLNEED)
mark_page_accessed(obj_priv->pages[i]);
- page_cache_release(obj_priv->pages[i]);
- }
+
+ page_cache_release(obj_priv->pages[i]);
+ }
obj_priv->dirty = 0;
drm_free_large(obj_priv->pages);
obj_priv->last_rendering_seqno = 0;
}
+/* Immediately discard the backing storage */
+static void
+i915_gem_object_truncate(struct drm_gem_object *obj)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct inode *inode;
+
+ inode = obj->filp->f_path.dentry->d_inode;
+ if (inode->i_op->truncate)
+ inode->i_op->truncate (inode);
+
+ obj_priv->madv = __I915_MADV_PURGED;
+}
+
+static inline int
+i915_gem_object_is_purgeable(struct drm_i915_gem_object *obj_priv)
+{
+ return obj_priv->madv == I915_MADV_DONTNEED;
+}
+
static void
i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
{
if ((obj->write_domain & flush_domains) ==
obj->write_domain) {
+ uint32_t old_write_domain = obj->write_domain;
+
obj->write_domain = 0;
i915_gem_object_move_to_active(obj, seqno);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
}
}
- if (was_empty && !dev_priv->mm.suspended)
- queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+ if (!dev_priv->mm.suspended) {
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+ if (was_empty)
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+ }
return seqno;
}
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ trace_i915_gem_request_retire(dev, request->seqno);
+
/* Move any buffers on the active list that are no longer referenced
* by the ringbuffer to the flushing/inactive lists as appropriate.
*/
/**
* Returns true if seq1 is later than seq2.
*/
-static int
+bool
i915_seqno_passed(uint32_t seq1, uint32_t seq2)
{
return (int32_t)(seq1 - seq2) >= 0;
retiring_seqno = request->seqno;
if (i915_seqno_passed(seqno, retiring_seqno) ||
- dev_priv->mm.wedged) {
+ atomic_read(&dev_priv->mm.wedged)) {
i915_gem_retire_request(dev, request);
list_del(&request->list);
BUG_ON(seqno == 0);
+ if (atomic_read(&dev_priv->mm.wedged))
+ return -EIO;
+
if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
if (IS_IGDNG(dev))
ier = I915_READ(DEIER) | I915_READ(GTIER);
i915_driver_irq_postinstall(dev);
}
+ trace_i915_gem_request_wait_begin(dev, seqno);
+
dev_priv->mm.waiting_gem_seqno = seqno;
i915_user_irq_get(dev);
ret = wait_event_interruptible(dev_priv->irq_queue,
i915_seqno_passed(i915_get_gem_seqno(dev),
seqno) ||
- dev_priv->mm.wedged);
+ atomic_read(&dev_priv->mm.wedged));
i915_user_irq_put(dev);
dev_priv->mm.waiting_gem_seqno = 0;
+
+ trace_i915_gem_request_wait_end(dev, seqno);
}
- if (dev_priv->mm.wedged)
+ if (atomic_read(&dev_priv->mm.wedged))
ret = -EIO;
if (ret && ret != -ERESTARTSYS)
DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
invalidate_domains, flush_domains);
#endif
+ trace_i915_gem_request_flush(dev, dev_priv->mm.next_gem_seqno,
+ invalidate_domains, flush_domains);
if (flush_domains & I915_GEM_DOMAIN_CPU)
drm_agp_chipset_flush(dev);
return -EINVAL;
}
+ /* blow away mappings if mapped through GTT */
+ i915_gem_release_mmap(obj);
+
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
+ i915_gem_clear_fence_reg(obj);
+
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
return ret;
}
+ BUG_ON(obj_priv->active);
+
if (obj_priv->agp_mem != NULL) {
drm_unbind_agp(obj_priv->agp_mem);
drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE);
obj_priv->agp_mem = NULL;
}
- BUG_ON(obj_priv->active);
-
- /* blow away mappings if mapped through GTT */
- i915_gem_release_mmap(obj);
-
- if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
- i915_gem_clear_fence_reg(obj);
-
i915_gem_object_put_pages(obj);
+ BUG_ON(obj_priv->pages_refcount);
if (obj_priv->gtt_space) {
atomic_dec(&dev->gtt_count);
if (!list_empty(&obj_priv->list))
list_del_init(&obj_priv->list);
+ if (i915_gem_object_is_purgeable(obj_priv))
+ i915_gem_object_truncate(obj);
+
+ trace_i915_gem_object_unbind(obj);
+
return 0;
}
+static struct drm_gem_object *
+i915_gem_find_inactive_object(struct drm_device *dev, int min_size)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv;
+ struct drm_gem_object *best = NULL;
+ struct drm_gem_object *first = NULL;
+
+ /* Try to find the smallest clean object */
+ list_for_each_entry(obj_priv, &dev_priv->mm.inactive_list, list) {
+ struct drm_gem_object *obj = obj_priv->obj;
+ if (obj->size >= min_size) {
+ if ((!obj_priv->dirty ||
+ i915_gem_object_is_purgeable(obj_priv)) &&
+ (!best || obj->size < best->size)) {
+ best = obj;
+ if (best->size == min_size)
+ return best;
+ }
+ if (!first)
+ first = obj;
+ }
+ }
+
+ return best ? best : first;
+}
+
static int
-i915_gem_evict_something(struct drm_device *dev)
+i915_gem_evict_everything(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ uint32_t seqno;
+ int ret;
+ bool lists_empty;
+
+ spin_lock(&dev_priv->mm.active_list_lock);
+ lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
+ list_empty(&dev_priv->mm.flushing_list) &&
+ list_empty(&dev_priv->mm.active_list));
+ spin_unlock(&dev_priv->mm.active_list_lock);
+
+ if (lists_empty)
+ return -ENOSPC;
+
+ /* Flush everything (on to the inactive lists) and evict */
+ i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
+ seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS);
+ if (seqno == 0)
+ return -ENOMEM;
+
+ ret = i915_wait_request(dev, seqno);
+ if (ret)
+ return ret;
+
+ ret = i915_gem_evict_from_inactive_list(dev);
+ if (ret)
+ return ret;
+
+ spin_lock(&dev_priv->mm.active_list_lock);
+ lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
+ list_empty(&dev_priv->mm.flushing_list) &&
+ list_empty(&dev_priv->mm.active_list));
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ BUG_ON(!lists_empty);
+
+ return 0;
+}
+
+static int
+i915_gem_evict_something(struct drm_device *dev, int min_size)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_gem_object *obj;
- struct drm_i915_gem_object *obj_priv;
- int ret = 0;
+ int ret;
for (;;) {
+ i915_gem_retire_requests(dev);
+
/* If there's an inactive buffer available now, grab it
* and be done.
*/
- if (!list_empty(&dev_priv->mm.inactive_list)) {
- obj_priv = list_first_entry(&dev_priv->mm.inactive_list,
- struct drm_i915_gem_object,
- list);
- obj = obj_priv->obj;
- BUG_ON(obj_priv->pin_count != 0);
+ obj = i915_gem_find_inactive_object(dev, min_size);
+ if (obj) {
+ struct drm_i915_gem_object *obj_priv;
+
#if WATCH_LRU
DRM_INFO("%s: evicting %p\n", __func__, obj);
#endif
+ obj_priv = obj->driver_private;
+ BUG_ON(obj_priv->pin_count != 0);
BUG_ON(obj_priv->active);
/* Wait on the rendering and unbind the buffer. */
- ret = i915_gem_object_unbind(obj);
- break;
+ return i915_gem_object_unbind(obj);
}
/* If we didn't get anything, but the ring is still processing
- * things, wait for one of those things to finish and hopefully
- * leave us a buffer to evict.
+ * things, wait for the next to finish and hopefully leave us
+ * a buffer to evict.
*/
if (!list_empty(&dev_priv->mm.request_list)) {
struct drm_i915_gem_request *request;
ret = i915_wait_request(dev, request->seqno);
if (ret)
- break;
+ return ret;
- /* if waiting caused an object to become inactive,
- * then loop around and wait for it. Otherwise, we
- * assume that waiting freed and unbound something,
- * so there should now be some space in the GTT
- */
- if (!list_empty(&dev_priv->mm.inactive_list))
- continue;
- break;
+ continue;
}
/* If we didn't have anything on the request list but there
* will get moved to inactive.
*/
if (!list_empty(&dev_priv->mm.flushing_list)) {
- obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
- struct drm_i915_gem_object,
- list);
- obj = obj_priv->obj;
+ struct drm_i915_gem_object *obj_priv;
- i915_gem_flush(dev,
- obj->write_domain,
- obj->write_domain);
- i915_add_request(dev, NULL, obj->write_domain);
+ /* Find an object that we can immediately reuse */
+ list_for_each_entry(obj_priv, &dev_priv->mm.flushing_list, list) {
+ obj = obj_priv->obj;
+ if (obj->size >= min_size)
+ break;
- obj = NULL;
- continue;
- }
+ obj = NULL;
+ }
- DRM_ERROR("inactive empty %d request empty %d "
- "flushing empty %d\n",
- list_empty(&dev_priv->mm.inactive_list),
- list_empty(&dev_priv->mm.request_list),
- list_empty(&dev_priv->mm.flushing_list));
- /* If we didn't do any of the above, there's nothing to be done
- * and we just can't fit it in.
- */
- return -ENOSPC;
- }
- return ret;
-}
+ if (obj != NULL) {
+ uint32_t seqno;
-static int
-i915_gem_evict_everything(struct drm_device *dev)
-{
- int ret;
+ i915_gem_flush(dev,
+ obj->write_domain,
+ obj->write_domain);
+ seqno = i915_add_request(dev, NULL, obj->write_domain);
+ if (seqno == 0)
+ return -ENOMEM;
- for (;;) {
- ret = i915_gem_evict_something(dev);
- if (ret != 0)
- break;
+ ret = i915_wait_request(dev, seqno);
+ if (ret)
+ return ret;
+
+ continue;
+ }
+ }
+
+ /* If we didn't do any of the above, there's no single buffer
+ * large enough to swap out for the new one, so just evict
+ * everything and start again. (This should be rare.)
+ */
+ if (!list_empty (&dev_priv->mm.inactive_list))
+ return i915_gem_evict_from_inactive_list(dev);
+ else
+ return i915_gem_evict_everything(dev);
}
- if (ret == -ENOSPC)
- return 0;
- return ret;
}
int
BUG_ON(obj_priv->pages != NULL);
obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *));
if (obj_priv->pages == NULL) {
- DRM_ERROR("Faled to allocate page list\n");
obj_priv->pages_refcount--;
return -ENOMEM;
}
page = read_mapping_page(mapping, i, NULL);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
- DRM_ERROR("read_mapping_page failed: %d\n", ret);
i915_gem_object_put_pages(obj);
return ret;
}
else
i830_write_fence_reg(reg);
+ trace_i915_gem_object_get_fence(obj, i, obj_priv->tiling_mode);
+
return 0;
}
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_mm_node *free_space;
- int page_count, ret;
+ bool retry_alloc = false;
+ int ret;
if (dev_priv->mm.suspended)
return -EBUSY;
+
+ if (obj_priv->madv != I915_MADV_WILLNEED) {
+ DRM_ERROR("Attempting to bind a purgeable object\n");
+ return -EINVAL;
+ }
+
if (alignment == 0)
alignment = i915_gem_get_gtt_alignment(obj);
if (alignment & (i915_gem_get_gtt_alignment(obj) - 1)) {
}
}
if (obj_priv->gtt_space == NULL) {
- bool lists_empty;
-
/* If the gtt is empty and we're still having trouble
* fitting our object in, we're out of memory.
*/
#if WATCH_LRU
DRM_INFO("%s: GTT full, evicting something\n", __func__);
#endif
- spin_lock(&dev_priv->mm.active_list_lock);
- lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
- list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->mm.active_list));
- spin_unlock(&dev_priv->mm.active_list_lock);
- if (lists_empty) {
- DRM_ERROR("GTT full, but LRU list empty\n");
- return -ENOSPC;
- }
-
- ret = i915_gem_evict_something(dev);
- if (ret != 0) {
- if (ret != -ERESTARTSYS)
- DRM_ERROR("Failed to evict a buffer %d\n", ret);
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret)
return ret;
- }
+
goto search_free;
}
DRM_INFO("Binding object of size %zd at 0x%08x\n",
obj->size, obj_priv->gtt_offset);
#endif
+ if (retry_alloc) {
+ i915_gem_object_set_page_gfp_mask (obj,
+ i915_gem_object_get_page_gfp_mask (obj) & ~__GFP_NORETRY);
+ }
ret = i915_gem_object_get_pages(obj);
+ if (retry_alloc) {
+ i915_gem_object_set_page_gfp_mask (obj,
+ i915_gem_object_get_page_gfp_mask (obj) | __GFP_NORETRY);
+ }
if (ret) {
drm_mm_put_block(obj_priv->gtt_space);
obj_priv->gtt_space = NULL;
+
+ if (ret == -ENOMEM) {
+ /* first try to clear up some space from the GTT */
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret) {
+ /* now try to shrink everyone else */
+ if (! retry_alloc) {
+ retry_alloc = true;
+ goto search_free;
+ }
+
+ return ret;
+ }
+
+ goto search_free;
+ }
+
return ret;
}
- page_count = obj->size / PAGE_SIZE;
/* Create an AGP memory structure pointing at our pages, and bind it
* into the GTT.
*/
obj_priv->agp_mem = drm_agp_bind_pages(dev,
obj_priv->pages,
- page_count,
+ obj->size >> PAGE_SHIFT,
obj_priv->gtt_offset,
obj_priv->agp_type);
if (obj_priv->agp_mem == NULL) {
i915_gem_object_put_pages(obj);
drm_mm_put_block(obj_priv->gtt_space);
obj_priv->gtt_space = NULL;
- return -ENOMEM;
+
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret)
+ return ret;
+
+ goto search_free;
}
atomic_inc(&dev->gtt_count);
atomic_add(obj->size, &dev->gtt_memory);
BUG_ON(obj->read_domains & I915_GEM_GPU_DOMAINS);
BUG_ON(obj->write_domain & I915_GEM_GPU_DOMAINS);
+ trace_i915_gem_object_bind(obj, obj_priv->gtt_offset);
+
return 0;
}
if (obj_priv->pages == NULL)
return;
- /* XXX: The 865 in particular appears to be weird in how it handles
- * cache flushing. We haven't figured it out, but the
- * clflush+agp_chipset_flush doesn't appear to successfully get the
- * data visible to the PGU, while wbinvd + agp_chipset_flush does.
- */
- if (IS_I865G(obj->dev)) {
- wbinvd();
- return;
- }
+ trace_i915_gem_object_clflush(obj);
drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
}
{
struct drm_device *dev = obj->dev;
uint32_t seqno;
+ uint32_t old_write_domain;
if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
return;
/* Queue the GPU write cache flushing we need. */
+ old_write_domain = obj->write_domain;
i915_gem_flush(dev, 0, obj->write_domain);
seqno = i915_add_request(dev, NULL, obj->write_domain);
obj->write_domain = 0;
i915_gem_object_move_to_active(obj, seqno);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/** Flushes the GTT write domain for the object if it's dirty. */
static void
i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj)
{
+ uint32_t old_write_domain;
+
if (obj->write_domain != I915_GEM_DOMAIN_GTT)
return;
* to it immediately go to main memory as far as we know, so there's
* no chipset flush. It also doesn't land in render cache.
*/
+ old_write_domain = obj->write_domain;
obj->write_domain = 0;
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/** Flushes the CPU write domain for the object if it's dirty. */
i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
+ uint32_t old_write_domain;
if (obj->write_domain != I915_GEM_DOMAIN_CPU)
return;
i915_gem_clflush_object(obj);
drm_agp_chipset_flush(dev);
+ old_write_domain = obj->write_domain;
obj->write_domain = 0;
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/**
i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ uint32_t old_write_domain, old_read_domains;
int ret;
/* Not valid to be called on unbound objects. */
if (ret != 0)
return ret;
+ old_write_domain = obj->write_domain;
+ old_read_domains = obj->read_domains;
+
/* If we're writing through the GTT domain, then CPU and GPU caches
* will need to be invalidated at next use.
*/
obj_priv->dirty = 1;
}
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ old_write_domain);
+
return 0;
}
static int
i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
{
+ uint32_t old_write_domain, old_read_domains;
int ret;
i915_gem_object_flush_gpu_write_domain(obj);
*/
i915_gem_object_set_to_full_cpu_read_domain(obj);
+ old_write_domain = obj->write_domain;
+ old_read_domains = obj->read_domains;
+
/* Flush the CPU cache if it's still invalid. */
if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) {
i915_gem_clflush_object(obj);
obj->write_domain = I915_GEM_DOMAIN_CPU;
}
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ old_write_domain);
+
return 0;
}
struct drm_i915_gem_object *obj_priv = obj->driver_private;
uint32_t invalidate_domains = 0;
uint32_t flush_domains = 0;
+ uint32_t old_read_domains;
BUG_ON(obj->pending_read_domains & I915_GEM_DOMAIN_CPU);
BUG_ON(obj->pending_write_domain == I915_GEM_DOMAIN_CPU);
i915_gem_clflush_object(obj);
}
+ old_read_domains = obj->read_domains;
+
/* The actual obj->write_domain will be updated with
* pending_write_domain after we emit the accumulated flush for all
* of our domain changes in execbuffers (which clears objects'
obj->read_domains, obj->write_domain,
dev->invalidate_domains, dev->flush_domains);
#endif
+
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ obj->write_domain);
}
/**
uint64_t offset, uint64_t size)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ uint32_t old_read_domains;
int i, ret;
if (offset == 0 && size == obj->size)
*/
BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+ old_read_domains = obj->read_domains;
obj->read_domains |= I915_GEM_DOMAIN_CPU;
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ obj->write_domain);
+
return 0;
}
}
target_obj_priv = target_obj->driver_private;
+#if WATCH_RELOC
+ DRM_INFO("%s: obj %p offset %08x target %d "
+ "read %08x write %08x gtt %08x "
+ "presumed %08x delta %08x\n",
+ __func__,
+ obj,
+ (int) reloc->offset,
+ (int) reloc->target_handle,
+ (int) reloc->read_domains,
+ (int) reloc->write_domain,
+ (int) target_obj_priv->gtt_offset,
+ (int) reloc->presumed_offset,
+ reloc->delta);
+#endif
+
/* The target buffer should have appeared before us in the
* exec_object list, so it should have a GTT space bound by now.
*/
return -EINVAL;
}
- if (reloc->offset > obj->size - 4) {
- DRM_ERROR("Relocation beyond object bounds: "
- "obj %p target %d offset %d size %d.\n",
- obj, reloc->target_handle,
- (int) reloc->offset, (int) obj->size);
- drm_gem_object_unreference(target_obj);
- i915_gem_object_unpin(obj);
- return -EINVAL;
- }
- if (reloc->offset & 3) {
- DRM_ERROR("Relocation not 4-byte aligned: "
- "obj %p target %d offset %d.\n",
- obj, reloc->target_handle,
- (int) reloc->offset);
- drm_gem_object_unreference(target_obj);
- i915_gem_object_unpin(obj);
- return -EINVAL;
- }
-
+ /* Validate that the target is in a valid r/w GPU domain */
if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
reloc->read_domains & I915_GEM_DOMAIN_CPU) {
DRM_ERROR("reloc with read/write CPU domains: "
i915_gem_object_unpin(obj);
return -EINVAL;
}
-
if (reloc->write_domain && target_obj->pending_write_domain &&
reloc->write_domain != target_obj->pending_write_domain) {
DRM_ERROR("Write domain conflict: "
return -EINVAL;
}
-#if WATCH_RELOC
- DRM_INFO("%s: obj %p offset %08x target %d "
- "read %08x write %08x gtt %08x "
- "presumed %08x delta %08x\n",
- __func__,
- obj,
- (int) reloc->offset,
- (int) reloc->target_handle,
- (int) reloc->read_domains,
- (int) reloc->write_domain,
- (int) target_obj_priv->gtt_offset,
- (int) reloc->presumed_offset,
- reloc->delta);
-#endif
-
target_obj->pending_read_domains |= reloc->read_domains;
target_obj->pending_write_domain |= reloc->write_domain;
continue;
}
+ /* Check that the relocation address is valid... */
+ if (reloc->offset > obj->size - 4) {
+ DRM_ERROR("Relocation beyond object bounds: "
+ "obj %p target %d offset %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset, (int) obj->size);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
+ }
+ if (reloc->offset & 3) {
+ DRM_ERROR("Relocation not 4-byte aligned: "
+ "obj %p target %d offset %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
+ }
+
+ /* and points to somewhere within the target object. */
+ if (reloc->delta >= target_obj->size) {
+ DRM_ERROR("Relocation beyond target object bounds: "
+ "obj %p target %d delta %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->delta, (int) target_obj->size);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
+ }
+
ret = i915_gem_object_set_to_gtt_domain(obj, 1);
if (ret != 0) {
drm_gem_object_unreference(target_obj);
exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
exec_len = (uint32_t) exec->batch_len;
+ trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno);
+
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
i915_verify_inactive(dev, __FILE__, __LINE__);
- if (dev_priv->mm.wedged) {
+ if (atomic_read(&dev_priv->mm.wedged)) {
DRM_ERROR("Execbuf while wedged\n");
mutex_unlock(&dev->struct_mutex);
ret = -EIO;
/* error other than GTT full, or we've already tried again */
if (ret != -ENOSPC || pin_tries >= 1) {
- if (ret != -ERESTARTSYS)
- DRM_ERROR("Failed to pin buffers %d\n", ret);
+ if (ret != -ERESTARTSYS) {
+ unsigned long long total_size = 0;
+ for (i = 0; i < args->buffer_count; i++)
+ total_size += object_list[i]->size;
+ DRM_ERROR("Failed to pin buffer %d of %d, total %llu bytes: %d\n",
+ pinned+1, args->buffer_count,
+ total_size, ret);
+ DRM_ERROR("%d objects [%d pinned], "
+ "%d object bytes [%d pinned], "
+ "%d/%d gtt bytes\n",
+ atomic_read(&dev->object_count),
+ atomic_read(&dev->pin_count),
+ atomic_read(&dev->object_memory),
+ atomic_read(&dev->pin_memory),
+ atomic_read(&dev->gtt_memory),
+ dev->gtt_total);
+ }
goto err;
}
/* evict everyone we can from the aperture */
ret = i915_gem_evict_everything(dev);
- if (ret)
+ if (ret && ret != -ENOSPC)
goto err;
}
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
+ uint32_t old_write_domain = obj->write_domain;
obj->write_domain = obj->pending_write_domain;
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
i915_verify_inactive(dev, __FILE__, __LINE__);
i915_verify_inactive(dev, __FILE__, __LINE__);
if (obj_priv->gtt_space == NULL) {
ret = i915_gem_object_bind_to_gtt(obj, alignment);
- if (ret != 0) {
- if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to bind: %d\n", ret);
+ if (ret)
return ret;
- }
}
/*
* Pre-965 chips need a fence register set up in order to
}
obj_priv = obj->driver_private;
+ if (obj_priv->madv != I915_MADV_WILLNEED) {
+ DRM_ERROR("Attempting to pin a purgeable buffer\n");
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
+ }
+
if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
args->handle);
return i915_gem_ring_throttle(dev, file_priv);
}
+int
+i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_madvise *args = data;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+
+ switch (args->madv) {
+ case I915_MADV_DONTNEED:
+ case I915_MADV_WILLNEED:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+ if (obj == NULL) {
+ DRM_ERROR("Bad handle in i915_gem_madvise_ioctl(): %d\n",
+ args->handle);
+ return -EBADF;
+ }
+
+ mutex_lock(&dev->struct_mutex);
+ obj_priv = obj->driver_private;
+
+ if (obj_priv->pin_count) {
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+
+ DRM_ERROR("Attempted i915_gem_madvise_ioctl() on a pinned object\n");
+ return -EINVAL;
+ }
+
+ if (obj_priv->madv != __I915_MADV_PURGED)
+ obj_priv->madv = args->madv;
+
+ /* if the object is no longer bound, discard its backing storage */
+ if (i915_gem_object_is_purgeable(obj_priv) &&
+ obj_priv->gtt_space == NULL)
+ i915_gem_object_truncate(obj);
+
+ args->retained = obj_priv->madv != __I915_MADV_PURGED;
+
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+
+ return 0;
+}
+
int i915_gem_init_object(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj_priv->list);
INIT_LIST_HEAD(&obj_priv->fence_list);
+ obj_priv->madv = I915_MADV_WILLNEED;
+
+ trace_i915_gem_object_create(obj);
return 0;
}
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ trace_i915_gem_object_destroy(obj);
+
while (obj_priv->pin_count > 0)
i915_gem_object_unpin(obj);
i915_gem_object_unbind(obj);
- i915_gem_free_mmap_offset(obj);
+ if (obj_priv->mmap_offset)
+ i915_gem_free_mmap_offset(obj);
kfree(obj_priv->page_cpu_valid);
kfree(obj_priv->bit_17);
kfree(obj->driver_private);
}
-/** Unbinds all objects that are on the given buffer list. */
+/** Unbinds all inactive objects. */
static int
-i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
+i915_gem_evict_from_inactive_list(struct drm_device *dev)
{
- struct drm_gem_object *obj;
- struct drm_i915_gem_object *obj_priv;
- int ret;
+ drm_i915_private_t *dev_priv = dev->dev_private;
- while (!list_empty(head)) {
- obj_priv = list_first_entry(head,
- struct drm_i915_gem_object,
- list);
- obj = obj_priv->obj;
+ while (!list_empty(&dev_priv->mm.inactive_list)) {
+ struct drm_gem_object *obj;
+ int ret;
- if (obj_priv->pin_count != 0) {
- DRM_ERROR("Pinned object in unbind list\n");
- mutex_unlock(&dev->struct_mutex);
- return -EINVAL;
- }
+ obj = list_first_entry(&dev_priv->mm.inactive_list,
+ struct drm_i915_gem_object,
+ list)->obj;
ret = i915_gem_object_unbind(obj);
if (ret != 0) {
- DRM_ERROR("Error unbinding object in LeaveVT: %d\n",
- ret);
- mutex_unlock(&dev->struct_mutex);
+ DRM_ERROR("Error unbinding object: %d\n", ret);
return ret;
}
}
-
return 0;
}
* We need to replace this with a semaphore, or something.
*/
dev_priv->mm.suspended = 1;
+ del_timer(&dev_priv->hangcheck_timer);
/* Cancel the retire work handler, wait for it to finish if running
*/
if (last_seqno == cur_seqno) {
if (stuck++ > 100) {
DRM_ERROR("hardware wedged\n");
- dev_priv->mm.wedged = 1;
+ atomic_set(&dev_priv->mm.wedged, 1);
DRM_WAKEUP(&dev_priv->irq_queue);
break;
}
i915_gem_retire_requests(dev);
spin_lock(&dev_priv->mm.active_list_lock);
- if (!dev_priv->mm.wedged) {
+ if (!atomic_read(&dev_priv->mm.wedged)) {
/* Active and flushing should now be empty as we've
* waited for a sequence higher than any pending execbuffer
*/
* the GPU domains and just stuff them onto inactive.
*/
while (!list_empty(&dev_priv->mm.active_list)) {
- struct drm_i915_gem_object *obj_priv;
+ struct drm_gem_object *obj;
+ uint32_t old_write_domain;
- obj_priv = list_first_entry(&dev_priv->mm.active_list,
- struct drm_i915_gem_object,
- list);
- obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
- i915_gem_object_move_to_inactive(obj_priv->obj);
+ obj = list_first_entry(&dev_priv->mm.active_list,
+ struct drm_i915_gem_object,
+ list)->obj;
+ old_write_domain = obj->write_domain;
+ obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
spin_unlock(&dev_priv->mm.active_list_lock);
while (!list_empty(&dev_priv->mm.flushing_list)) {
- struct drm_i915_gem_object *obj_priv;
+ struct drm_gem_object *obj;
+ uint32_t old_write_domain;
- obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
- struct drm_i915_gem_object,
- list);
- obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
- i915_gem_object_move_to_inactive(obj_priv->obj);
+ obj = list_first_entry(&dev_priv->mm.flushing_list,
+ struct drm_i915_gem_object,
+ list)->obj;
+ old_write_domain = obj->write_domain;
+ obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/* Move all inactive buffers out of the GTT. */
- ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+ ret = i915_gem_evict_from_inactive_list(dev);
WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
if (ret) {
mutex_unlock(&dev->struct_mutex);
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
- if (dev_priv->mm.wedged) {
+ if (atomic_read(&dev_priv->mm.wedged)) {
DRM_ERROR("Reenabling wedged hardware, good luck\n");
- dev_priv->mm.wedged = 0;
+ atomic_set(&dev_priv->mm.wedged, 0);
}
mutex_lock(&dev->struct_mutex);
i915_gem_retire_work_handler);
dev_priv->mm.next_gem_seqno = 1;
+ spin_lock(&shrink_list_lock);
+ list_add(&dev_priv->mm.shrink_list, &shrink_list);
+ spin_unlock(&shrink_list_lock);
+
/* Old X drivers will take 0-2 for front, back, depth buffers */
dev_priv->fence_reg_start = 3;
list_del_init(i915_file_priv->mm.request_list.next);
mutex_unlock(&dev->struct_mutex);
}
+
+static int
+i915_gem_shrink(int nr_to_scan, gfp_t gfp_mask)
+{
+ drm_i915_private_t *dev_priv, *next_dev;
+ struct drm_i915_gem_object *obj_priv, *next_obj;
+ int cnt = 0;
+ int would_deadlock = 1;
+
+ /* "fast-path" to count number of available objects */
+ if (nr_to_scan == 0) {
+ spin_lock(&shrink_list_lock);
+ list_for_each_entry(dev_priv, &shrink_list, mm.shrink_list) {
+ struct drm_device *dev = dev_priv->dev;
+
+ if (mutex_trylock(&dev->struct_mutex)) {
+ list_for_each_entry(obj_priv,
+ &dev_priv->mm.inactive_list,
+ list)
+ cnt++;
+ mutex_unlock(&dev->struct_mutex);
+ }
+ }
+ spin_unlock(&shrink_list_lock);
+
+ return (cnt / 100) * sysctl_vfs_cache_pressure;
+ }
+
+ spin_lock(&shrink_list_lock);
+
+ /* first scan for clean buffers */
+ list_for_each_entry_safe(dev_priv, next_dev,
+ &shrink_list, mm.shrink_list) {
+ struct drm_device *dev = dev_priv->dev;
+
+ if (! mutex_trylock(&dev->struct_mutex))
+ continue;
+
+ spin_unlock(&shrink_list_lock);
+
+ i915_gem_retire_requests(dev);
+
+ list_for_each_entry_safe(obj_priv, next_obj,
+ &dev_priv->mm.inactive_list,
+ list) {
+ if (i915_gem_object_is_purgeable(obj_priv)) {
+ i915_gem_object_unbind(obj_priv->obj);
+ if (--nr_to_scan <= 0)
+ break;
+ }
+ }
+
+ spin_lock(&shrink_list_lock);
+ mutex_unlock(&dev->struct_mutex);
+
+ would_deadlock = 0;
+
+ if (nr_to_scan <= 0)
+ break;
+ }
+
+ /* second pass, evict/count anything still on the inactive list */
+ list_for_each_entry_safe(dev_priv, next_dev,
+ &shrink_list, mm.shrink_list) {
+ struct drm_device *dev = dev_priv->dev;
+
+ if (! mutex_trylock(&dev->struct_mutex))
+ continue;
+
+ spin_unlock(&shrink_list_lock);
+
+ list_for_each_entry_safe(obj_priv, next_obj,
+ &dev_priv->mm.inactive_list,
+ list) {
+ if (nr_to_scan > 0) {
+ i915_gem_object_unbind(obj_priv->obj);
+ nr_to_scan--;
+ } else
+ cnt++;
+ }
+
+ spin_lock(&shrink_list_lock);
+ mutex_unlock(&dev->struct_mutex);
+
+ would_deadlock = 0;
+ }
+
+ spin_unlock(&shrink_list_lock);
+
+ if (would_deadlock)
+ return -1;
+ else if (cnt > 0)
+ return (cnt / 100) * sysctl_vfs_cache_pressure;
+ else
+ return 0;
+}
+
+static struct shrinker shrinker = {
+ .shrink = i915_gem_shrink,
+ .seeks = DEFAULT_SEEKS,
+};
+
+__init void
+i915_gem_shrinker_init(void)
+{
+ register_shrinker(&shrinker);
+}
+
+__exit void
+i915_gem_shrinker_exit(void)
+{
+ unregister_shrinker(&shrinker);
+}
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "i915_trace.h"
#include "intel_drv.h"
#define MAX_NOPID ((u32)~0)
}
if (gt_iir & GT_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
DRM_WAKEUP(&dev_priv->irq_queue);
}
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
error_work);
struct drm_device *dev = dev_priv->dev;
- char *event_string = "ERROR=1";
- char *envp[] = { event_string, NULL };
+ char *error_event[] = { "ERROR=1", NULL };
+ char *reset_event[] = { "RESET=1", NULL };
+ char *reset_done_event[] = { "ERROR=0", NULL };
DRM_DEBUG("generating error event\n");
-
- kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
+
+ if (atomic_read(&dev_priv->mm.wedged)) {
+ if (IS_I965G(dev)) {
+ DRM_DEBUG("resetting chip\n");
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event);
+ if (!i965_reset(dev, GDRST_RENDER)) {
+ atomic_set(&dev_priv->mm.wedged, 0);
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event);
+ }
+ } else {
+ printk("reboot required\n");
+ }
+ }
}
/**
* so userspace knows something bad happened (should trigger collection
* of a ring dump etc.).
*/
-static void i915_handle_error(struct drm_device *dev)
+static void i915_handle_error(struct drm_device *dev, bool wedged)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 eir = I915_READ(EIR);
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
+ if (wedged) {
+ atomic_set(&dev_priv->mm.wedged, 1);
+
+ /*
+ * Wakeup waiting processes so they don't hang
+ */
+ printk("i915: Waking up sleeping processes\n");
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
queue_work(dev_priv->wq, &dev_priv->error_work);
}
pipeb_stats = I915_READ(PIPEBSTAT);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
- i915_handle_error(dev);
+ i915_handle_error(dev, false);
/*
* Clear the PIPE(A|B)STAT regs before the IIR
}
if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
DRM_WAKEUP(&dev_priv->irq_queue);
+ dev_priv->hangcheck_count = 0;
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
}
if (pipea_stats & vblank_status) {
return -EINVAL;
}
+struct drm_i915_gem_request *i915_get_tail_request(struct drm_device *dev) {
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ return list_entry(dev_priv->mm.request_list.prev, struct drm_i915_gem_request, list);
+}
+
+/**
+ * This is called when the chip hasn't reported back with completed
+ * batchbuffers in a long time. The first time this is called we simply record
+ * ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses
+ * again, we assume the chip is wedged and try to fix it.
+ */
+void i915_hangcheck_elapsed(unsigned long data)
+{
+ struct drm_device *dev = (struct drm_device *)data;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ uint32_t acthd;
+
+ if (!IS_I965G(dev))
+ acthd = I915_READ(ACTHD);
+ else
+ acthd = I915_READ(ACTHD_I965);
+
+ /* If all work is done then ACTHD clearly hasn't advanced. */
+ if (list_empty(&dev_priv->mm.request_list) ||
+ i915_seqno_passed(i915_get_gem_seqno(dev), i915_get_tail_request(dev)->seqno)) {
+ dev_priv->hangcheck_count = 0;
+ return;
+ }
+
+ if (dev_priv->last_acthd == acthd && dev_priv->hangcheck_count > 0) {
+ DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
+ i915_handle_error(dev, true);
+ return;
+ }
+
+ /* Reset timer case chip hangs without another request being added */
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+
+ if (acthd != dev_priv->last_acthd)
+ dev_priv->hangcheck_count = 0;
+ else
+ dev_priv->hangcheck_count++;
+
+ dev_priv->last_acthd = acthd;
+}
+
/* drm_dma.h hooks
*/
static void igdng_irq_preinstall(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
u32 blc_pwm_ctl, blc_pwm_ctl2;
+ u32 max_backlight, level, shift;
if (!(bclp & ASLE_BCLP_VALID))
return ASLE_BACKLIGHT_FAIL;
return ASLE_BACKLIGHT_FAIL;
blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
- blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2);
- if (blc_pwm_ctl2 & BLM_COMBINATION_MODE)
+ if (IS_I965G(dev) && (blc_pwm_ctl2 & BLM_COMBINATION_MODE))
pci_write_config_dword(dev->pdev, PCI_LBPC, bclp);
- else
- I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | ((bclp * 0x101)-1));
-
+ else {
+ if (IS_IGD(dev)) {
+ blc_pwm_ctl &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
+ max_backlight = (blc_pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT;
+ shift = BACKLIGHT_DUTY_CYCLE_SHIFT + 1;
+ } else {
+ blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
+ max_backlight = ((blc_pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+ shift = BACKLIGHT_DUTY_CYCLE_SHIFT;
+ }
+ level = (bclp * max_backlight) / 255;
+ I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | (level << shift));
+ }
asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
return 0;
#define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0)
#define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0)
#define LBB 0xf4
+#define GDRST 0xc0
+#define GDRST_FULL (0<<2)
+#define GDRST_RENDER (1<<2)
+#define GDRST_MEDIA (3<<2)
/* VGA stuff */
#define FBC_CTL_PLANEA (0<<0)
#define FBC_CTL_PLANEB (1<<0)
#define FBC_FENCE_OFF 0x0321b
+#define FBC_TAG 0x03300
#define FBC_LL_SIZE (1536)
+/* Framebuffer compression for GM45+ */
+#define DPFC_CB_BASE 0x3200
+#define DPFC_CONTROL 0x3208
+#define DPFC_CTL_EN (1<<31)
+#define DPFC_CTL_PLANEA (0<<30)
+#define DPFC_CTL_PLANEB (1<<30)
+#define DPFC_CTL_FENCE_EN (1<<29)
+#define DPFC_SR_EN (1<<10)
+#define DPFC_CTL_LIMIT_1X (0<<6)
+#define DPFC_CTL_LIMIT_2X (1<<6)
+#define DPFC_CTL_LIMIT_4X (2<<6)
+#define DPFC_RECOMP_CTL 0x320c
+#define DPFC_RECOMP_STALL_EN (1<<27)
+#define DPFC_RECOMP_STALL_WM_SHIFT (16)
+#define DPFC_RECOMP_STALL_WM_MASK (0x07ff0000)
+#define DPFC_RECOMP_TIMER_COUNT_SHIFT (0)
+#define DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f)
+#define DPFC_STATUS 0x3210
+#define DPFC_INVAL_SEG_SHIFT (16)
+#define DPFC_INVAL_SEG_MASK (0x07ff0000)
+#define DPFC_COMP_SEG_SHIFT (0)
+#define DPFC_COMP_SEG_MASK (0x000003ff)
+#define DPFC_STATUS2 0x3214
+#define DPFC_FENCE_YOFF 0x3218
+#define DPFC_CHICKEN 0x3224
+#define DPFC_HT_MODIFY (1<<31)
+
/*
* GPIO regs
*/
#define PF_ENABLE (1<<31)
#define PFA_WIN_SZ 0x68074
#define PFB_WIN_SZ 0x68874
+#define PFA_WIN_POS 0x68070
+#define PFB_WIN_POS 0x68870
/* legacy palette */
#define LGC_PALETTE_A 0x4a000
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
return;
}
+
static void i915_restore_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
return;
}
-int i915_save_state(struct drm_device *dev)
+
+void i915_save_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
-
- pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
-
- /* Render Standby */
- if (IS_I965G(dev) && IS_MOBILE(dev))
- dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
-
- /* Hardware status page */
- dev_priv->saveHWS = I915_READ(HWS_PGA);
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
/* This is only meaningful in non-KMS mode */
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
+
/* Cursor state */
dev_priv->saveCURACNTR = I915_READ(CURACNTR);
dev_priv->saveCURAPOS = I915_READ(CURAPOS);
dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
- /* Interrupt state */
- dev_priv->saveIIR = I915_READ(IIR);
- dev_priv->saveIER = I915_READ(IER);
- dev_priv->saveIMR = I915_READ(IMR);
-
/* VGA state */
dev_priv->saveVGA0 = I915_READ(VGA0);
dev_priv->saveVGA1 = I915_READ(VGA1);
dev_priv->saveVGA_PD = I915_READ(VGA_PD);
dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
- /* Clock gating state */
- dev_priv->saveD_STATE = I915_READ(D_STATE);
- dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D);
-
- /* Cache mode state */
- dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
-
- /* Memory Arbitration state */
- dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
-
- /* Scratch space */
- for (i = 0; i < 16; i++) {
- dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
- dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
- }
- for (i = 0; i < 3; i++)
- dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
-
- /* Fences */
- if (IS_I965G(dev)) {
- for (i = 0; i < 16; i++)
- dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
- } else {
- for (i = 0; i < 8; i++)
- dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
-
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- for (i = 0; i < 8; i++)
- dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
- }
i915_save_vga(dev);
-
- return 0;
}
-int i915_restore_state(struct drm_device *dev)
+void i915_restore_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
-
- pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
-
- /* Render Standby */
- if (IS_I965G(dev) && IS_MOBILE(dev))
- I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
-
- /* Hardware status page */
- I915_WRITE(HWS_PGA, dev_priv->saveHWS);
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
- /* Fences */
- if (IS_I965G(dev)) {
- for (i = 0; i < 16; i++)
- I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
- } else {
- for (i = 0; i < 8; i++)
- I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
- for (i = 0; i < 8; i++)
- I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
- }
-
/* Display port ratios (must be done before clock is set) */
if (SUPPORTS_INTEGRATED_DP(dev)) {
I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
}
+
/* This is only meaningful in non-KMS mode */
/* Don't restore them in KMS mode */
i915_restore_modeset_reg(dev);
+
/* Cursor state */
I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
DRM_UDELAY(150);
+ i915_restore_vga(dev);
+}
+
+int i915_save_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
+ i915_save_display(dev);
+
+ /* Interrupt state */
+ dev_priv->saveIER = I915_READ(IER);
+ dev_priv->saveIMR = I915_READ(IMR);
+
+ /* Clock gating state */
+ dev_priv->saveD_STATE = I915_READ(D_STATE);
+ dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D); /* Not sure about this */
+
+ /* Cache mode state */
+ dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
+
+ /* Memory Arbitration state */
+ dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE);
+
+ /* Scratch space */
+ for (i = 0; i < 16; i++) {
+ dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2));
+ dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2));
+ }
+ for (i = 0; i < 3; i++)
+ dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+ } else {
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+ }
+
+ return 0;
+}
+
+int i915_restore_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+ }
+
+ i915_restore_display(dev);
+
+ /* Interrupt state */
+ I915_WRITE (IER, dev_priv->saveIER);
+ I915_WRITE (IMR, dev_priv->saveIMR);
+
/* Clock gating state */
I915_WRITE (D_STATE, dev_priv->saveD_STATE);
I915_WRITE (DSPCLK_GATE_D, dev_priv->saveDSPCLK_GATE_D);
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
- i915_restore_vga(dev);
-
return 0;
}
--- /dev/null
+#if !defined(_I915_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _I915_TRACE_H_
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#include <drm/drmP.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM i915
+#define TRACE_SYSTEM_STRING __stringify(TRACE_SYSTEM)
+#define TRACE_INCLUDE_FILE i915_trace
+
+/* object tracking */
+
+TRACE_EVENT(i915_gem_object_create,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(u32, size)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->size = obj->size;
+ ),
+
+ TP_printk("obj=%p, size=%u", __entry->obj, __entry->size)
+);
+
+TRACE_EVENT(i915_gem_object_bind,
+
+ TP_PROTO(struct drm_gem_object *obj, u32 gtt_offset),
+
+ TP_ARGS(obj, gtt_offset),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(u32, gtt_offset)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->gtt_offset = gtt_offset;
+ ),
+
+ TP_printk("obj=%p, gtt_offset=%08x",
+ __entry->obj, __entry->gtt_offset)
+);
+
+TRACE_EVENT(i915_gem_object_clflush,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ ),
+
+ TP_printk("obj=%p", __entry->obj)
+);
+
+TRACE_EVENT(i915_gem_object_change_domain,
+
+ TP_PROTO(struct drm_gem_object *obj, uint32_t old_read_domains, uint32_t old_write_domain),
+
+ TP_ARGS(obj, old_read_domains, old_write_domain),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(u32, read_domains)
+ __field(u32, write_domain)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->read_domains = obj->read_domains | (old_read_domains << 16);
+ __entry->write_domain = obj->write_domain | (old_write_domain << 16);
+ ),
+
+ TP_printk("obj=%p, read=%04x, write=%04x",
+ __entry->obj,
+ __entry->read_domains, __entry->write_domain)
+);
+
+TRACE_EVENT(i915_gem_object_get_fence,
+
+ TP_PROTO(struct drm_gem_object *obj, int fence, int tiling_mode),
+
+ TP_ARGS(obj, fence, tiling_mode),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(int, fence)
+ __field(int, tiling_mode)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->fence = fence;
+ __entry->tiling_mode = tiling_mode;
+ ),
+
+ TP_printk("obj=%p, fence=%d, tiling=%d",
+ __entry->obj, __entry->fence, __entry->tiling_mode)
+);
+
+TRACE_EVENT(i915_gem_object_unbind,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ ),
+
+ TP_printk("obj=%p", __entry->obj)
+);
+
+TRACE_EVENT(i915_gem_object_destroy,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ ),
+
+ TP_printk("obj=%p", __entry->obj)
+);
+
+/* batch tracing */
+
+TRACE_EVENT(i915_gem_request_submit,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_flush,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno,
+ u32 flush_domains, u32 invalidate_domains),
+
+ TP_ARGS(dev, seqno, flush_domains, invalidate_domains),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ __field(u32, seqno)
+ __field(u32, flush_domains)
+ __field(u32, invalidate_domains)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->seqno = seqno;
+ __entry->flush_domains = flush_domains;
+ __entry->invalidate_domains = invalidate_domains;
+ ),
+
+ TP_printk("dev=%p, seqno=%u, flush=%04x, invalidate=%04x",
+ __entry->dev, __entry->seqno,
+ __entry->flush_domains, __entry->invalidate_domains)
+);
+
+
+TRACE_EVENT(i915_gem_request_complete,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_retire,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_wait_begin,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_wait_end,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%p, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_ring_wait_begin,
+
+ TP_PROTO(struct drm_device *dev),
+
+ TP_ARGS(dev),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ ),
+
+ TP_printk("dev=%p", __entry->dev)
+);
+
+TRACE_EVENT(i915_ring_wait_end,
+
+ TP_PROTO(struct drm_device *dev),
+
+ TP_ARGS(dev),
+
+ TP_STRUCT__entry(
+ __field(struct drm_device *, dev)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ ),
+
+ TP_printk("dev=%p", __entry->dev)
+);
+
+#endif /* _I915_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH ../../drivers/gpu/drm/i915
+#include <trace/define_trace.h>
--- /dev/null
+/*
+ * Copyright © 2009 Intel Corporation
+ *
+ * Authors:
+ * Chris Wilson <chris@chris-wilson.co.uk>
+ */
+
+#include "i915_drv.h"
+
+#define CREATE_TRACE_POINTS
+#include "i915_trace.h"
if (IS_I85X(dev_priv->dev))
dev_priv->lvds_ssc_freq =
general->ssc_freq ? 66 : 48;
+ else if (IS_IGDNG(dev_priv->dev))
+ dev_priv->lvds_ssc_freq =
+ general->ssc_freq ? 100 : 120;
else
dev_priv->lvds_ssc_freq =
general->ssc_freq ? 100 : 96;
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 adpa, temp;
+ u32 adpa;
bool ret;
- temp = adpa = I915_READ(PCH_ADPA);
-
- adpa &= ~ADPA_DAC_ENABLE;
- I915_WRITE(PCH_ADPA, adpa);
+ adpa = I915_READ(PCH_ADPA);
adpa &= ~ADPA_CRT_HOTPLUG_MASK;
else
ret = false;
- /* restore origin register */
- I915_WRITE(PCH_ADPA, temp);
return ret;
}
* Eric Anholt <eric@anholt.net>
*/
+#include <linux/module.h>
+#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include "drmP.h"
refclk, best_clock);
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
clock.p2 = limit->p2.p2_fast;
else
mdelay(20);
}
+/* Parameters have changed, update FBC info */
+static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int plane, i;
+ u32 fbc_ctl, fbc_ctl2;
+
+ dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
+
+ if (fb->pitch < dev_priv->cfb_pitch)
+ dev_priv->cfb_pitch = fb->pitch;
+
+ /* FBC_CTL wants 64B units */
+ dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
+ dev_priv->cfb_fence = obj_priv->fence_reg;
+ dev_priv->cfb_plane = intel_crtc->plane;
+ plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
+
+ /* Clear old tags */
+ for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
+ I915_WRITE(FBC_TAG + (i * 4), 0);
+
+ /* Set it up... */
+ fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane;
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ fbc_ctl2 |= FBC_CTL_CPU_FENCE;
+ I915_WRITE(FBC_CONTROL2, fbc_ctl2);
+ I915_WRITE(FBC_FENCE_OFF, crtc->y);
+
+ /* enable it... */
+ fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
+ fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
+ fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ fbc_ctl |= dev_priv->cfb_fence;
+ I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+ DRM_DEBUG("enabled FBC, pitch %ld, yoff %d, plane %d, ",
+ dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane);
+}
+
+void i8xx_disable_fbc(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 fbc_ctl;
+
+ if (!I915_HAS_FBC(dev))
+ return;
+
+ /* Disable compression */
+ fbc_ctl = I915_READ(FBC_CONTROL);
+ fbc_ctl &= ~FBC_CTL_EN;
+ I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+ /* Wait for compressing bit to clear */
+ while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING)
+ ; /* nothing */
+
+ intel_wait_for_vblank(dev);
+
+ DRM_DEBUG("disabled FBC\n");
+}
+
+static bool i8xx_fbc_enabled(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
+}
+
+static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA :
+ DPFC_CTL_PLANEB);
+ unsigned long stall_watermark = 200;
+ u32 dpfc_ctl;
+
+ dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
+ dev_priv->cfb_fence = obj_priv->fence_reg;
+ dev_priv->cfb_plane = intel_crtc->plane;
+
+ dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
+ if (obj_priv->tiling_mode != I915_TILING_NONE) {
+ dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence;
+ I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
+ } else {
+ I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY);
+ }
+
+ I915_WRITE(DPFC_CONTROL, dpfc_ctl);
+ I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
+ (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
+ (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
+ I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
+
+ /* enable it... */
+ I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
+
+ DRM_DEBUG("enabled fbc on plane %d\n", intel_crtc->plane);
+}
+
+void g4x_disable_fbc(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpfc_ctl;
+
+ /* Disable compression */
+ dpfc_ctl = I915_READ(DPFC_CONTROL);
+ dpfc_ctl &= ~DPFC_CTL_EN;
+ I915_WRITE(DPFC_CONTROL, dpfc_ctl);
+ intel_wait_for_vblank(dev);
+
+ DRM_DEBUG("disabled FBC\n");
+}
+
+static bool g4x_fbc_enabled(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
+}
+
+/**
+ * intel_update_fbc - enable/disable FBC as needed
+ * @crtc: CRTC to point the compressor at
+ * @mode: mode in use
+ *
+ * Set up the framebuffer compression hardware at mode set time. We
+ * enable it if possible:
+ * - plane A only (on pre-965)
+ * - no pixel mulitply/line duplication
+ * - no alpha buffer discard
+ * - no dual wide
+ * - framebuffer <= 2048 in width, 1536 in height
+ *
+ * We can't assume that any compression will take place (worst case),
+ * so the compressed buffer has to be the same size as the uncompressed
+ * one. It also must reside (along with the line length buffer) in
+ * stolen memory.
+ *
+ * We need to enable/disable FBC on a global basis.
+ */
+static void intel_update_fbc(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+ struct intel_framebuffer *intel_fb;
+ struct drm_i915_gem_object *obj_priv;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int plane = intel_crtc->plane;
+
+ if (!i915_powersave)
+ return;
+
+ if (!dev_priv->display.fbc_enabled ||
+ !dev_priv->display.enable_fbc ||
+ !dev_priv->display.disable_fbc)
+ return;
+
+ if (!crtc->fb)
+ return;
+
+ intel_fb = to_intel_framebuffer(fb);
+ obj_priv = intel_fb->obj->driver_private;
+
+ /*
+ * If FBC is already on, we just have to verify that we can
+ * keep it that way...
+ * Need to disable if:
+ * - changing FBC params (stride, fence, mode)
+ * - new fb is too large to fit in compressed buffer
+ * - going to an unsupported config (interlace, pixel multiply, etc.)
+ */
+ if (intel_fb->obj->size > dev_priv->cfb_size) {
+ DRM_DEBUG("framebuffer too large, disabling compression\n");
+ goto out_disable;
+ }
+ if ((mode->flags & DRM_MODE_FLAG_INTERLACE) ||
+ (mode->flags & DRM_MODE_FLAG_DBLSCAN)) {
+ DRM_DEBUG("mode incompatible with compression, disabling\n");
+ goto out_disable;
+ }
+ if ((mode->hdisplay > 2048) ||
+ (mode->vdisplay > 1536)) {
+ DRM_DEBUG("mode too large for compression, disabling\n");
+ goto out_disable;
+ }
+ if ((IS_I915GM(dev) || IS_I945GM(dev)) && plane != 0) {
+ DRM_DEBUG("plane not 0, disabling compression\n");
+ goto out_disable;
+ }
+ if (obj_priv->tiling_mode != I915_TILING_X) {
+ DRM_DEBUG("framebuffer not tiled, disabling compression\n");
+ goto out_disable;
+ }
+
+ if (dev_priv->display.fbc_enabled(crtc)) {
+ /* We can re-enable it in this case, but need to update pitch */
+ if (fb->pitch > dev_priv->cfb_pitch)
+ dev_priv->display.disable_fbc(dev);
+ if (obj_priv->fence_reg != dev_priv->cfb_fence)
+ dev_priv->display.disable_fbc(dev);
+ if (plane != dev_priv->cfb_plane)
+ dev_priv->display.disable_fbc(dev);
+ }
+
+ if (!dev_priv->display.fbc_enabled(crtc)) {
+ /* Now try to turn it back on if possible */
+ dev_priv->display.enable_fbc(crtc, 500);
+ }
+
+ return;
+
+out_disable:
+ DRM_DEBUG("unsupported config, disabling FBC\n");
+ /* Multiple disables should be harmless */
+ if (dev_priv->display.fbc_enabled(crtc))
+ dev_priv->display.disable_fbc(dev);
+}
+
static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
struct drm_i915_gem_object *obj_priv;
struct drm_gem_object *obj;
int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
unsigned long Start, Offset;
- int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
- int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
- int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
- int dsptileoff = (pipe == 0 ? DSPATILEOFF : DSPBTILEOFF);
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
+ int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
+ int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
+ int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
int ret;
return 0;
}
- switch (pipe) {
+ switch (plane) {
case 0:
case 1:
break;
default:
- DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+ DRM_ERROR("Can't update plane %d in SAREA\n", plane);
return -EINVAL;
}
I915_READ(dspbase);
}
+ if ((IS_I965G(dev) || plane == 0))
+ intel_update_fbc(crtc, &crtc->mode);
+
intel_wait_for_vblank(dev);
if (old_fb) {
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
+ int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS;
int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
}
}
+ /* Enable panel fitting for LVDS */
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ temp = I915_READ(pf_ctl_reg);
+ I915_WRITE(pf_ctl_reg, temp | PF_ENABLE);
+
+ /* currently full aspect */
+ I915_WRITE(pf_win_pos, 0);
+
+ I915_WRITE(pf_win_size,
+ (dev_priv->panel_fixed_mode->hdisplay << 16) |
+ (dev_priv->panel_fixed_mode->vdisplay));
+ }
+
/* Enable CPU pipe */
temp = I915_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) == 0) {
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR;
+ int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
u32 temp;
intel_crtc_load_lut(crtc);
+ if ((IS_I965G(dev) || plane == 0))
+ intel_update_fbc(crtc, &crtc->mode);
+
/* Give the overlay scaler a chance to enable if it's on this pipe */
//intel_crtc_dpms_video(crtc, true); TODO
intel_update_watermarks(dev);
/* Give the overlay scaler a chance to disable if it's on this pipe */
//intel_crtc_dpms_video(crtc, FALSE); TODO
+ if (dev_priv->cfb_plane == plane &&
+ dev_priv->display.disable_fbc)
+ dev_priv->display.disable_fbc(dev);
+
/* Disable the VGA plane that we never use */
i915_disable_vga(dev);
static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
bool enabled;
- if (IS_IGDNG(dev))
- igdng_crtc_dpms(crtc, mode);
- else
- i9xx_crtc_dpms(crtc, mode);
+ dev_priv->display.dpms(crtc, mode);
intel_crtc->dpms_mode = mode;
return true;
}
+static int i945_get_display_clock_speed(struct drm_device *dev)
+{
+ return 400000;
+}
-/** Returns the core display clock speed for i830 - i945 */
-static int intel_get_core_clock_speed(struct drm_device *dev)
+static int i915_get_display_clock_speed(struct drm_device *dev)
{
+ return 333000;
+}
- /* Core clock values taken from the published datasheets.
- * The 830 may go up to 166 Mhz, which we should check.
- */
- if (IS_I945G(dev))
- return 400000;
- else if (IS_I915G(dev))
- return 333000;
- else if (IS_I945GM(dev) || IS_845G(dev) || IS_IGDGM(dev))
- return 200000;
- else if (IS_I915GM(dev)) {
- u16 gcfgc = 0;
+static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
+{
+ return 200000;
+}
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
+static int i915gm_get_display_clock_speed(struct drm_device *dev)
+{
+ u16 gcfgc = 0;
- if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
- return 133000;
- else {
- switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
- case GC_DISPLAY_CLOCK_333_MHZ:
- return 333000;
- default:
- case GC_DISPLAY_CLOCK_190_200_MHZ:
- return 190000;
- }
- }
- } else if (IS_I865G(dev))
- return 266000;
- else if (IS_I855(dev)) {
- u16 hpllcc = 0;
- /* Assume that the hardware is in the high speed state. This
- * should be the default.
- */
- switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
- case GC_CLOCK_133_200:
- case GC_CLOCK_100_200:
- return 200000;
- case GC_CLOCK_166_250:
- return 250000;
- case GC_CLOCK_100_133:
- return 133000;
+ pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
+
+ if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
+ return 133000;
+ else {
+ switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
+ case GC_DISPLAY_CLOCK_333_MHZ:
+ return 333000;
+ default:
+ case GC_DISPLAY_CLOCK_190_200_MHZ:
+ return 190000;
}
- } else /* 852, 830 */
+ }
+}
+
+static int i865_get_display_clock_speed(struct drm_device *dev)
+{
+ return 266000;
+}
+
+static int i855_get_display_clock_speed(struct drm_device *dev)
+{
+ u16 hpllcc = 0;
+ /* Assume that the hardware is in the high speed state. This
+ * should be the default.
+ */
+ switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
+ case GC_CLOCK_133_200:
+ case GC_CLOCK_100_200:
+ return 200000;
+ case GC_CLOCK_166_250:
+ return 250000;
+ case GC_CLOCK_100_133:
return 133000;
+ }
+
+ /* Shouldn't happen */
+ return 0;
+}
- return 0; /* Silence gcc warning */
+static int i830_get_display_clock_speed(struct drm_device *dev)
+{
+ return 133000;
}
/**
{
long entries_required, wm_size;
- entries_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+ /*
+ * Note: we need to make sure we don't overflow for various clock &
+ * latency values.
+ * clocks go from a few thousand to several hundred thousand.
+ * latency is usually a few thousand
+ */
+ entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
+ 1000;
entries_required /= wm->cacheline_size;
DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
latency = &cxsr_latency_table[i];
if (is_desktop == latency->is_desktop &&
- fsb == latency->fsb_freq && mem == latency->mem_freq)
- break;
+ fsb == latency->fsb_freq && mem == latency->mem_freq)
+ return latency;
}
- if (i >= ARRAY_SIZE(cxsr_latency_table)) {
- DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
- return NULL;
- }
- return latency;
+
+ DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+
+ return NULL;
}
static void igd_disable_cxsr(struct drm_device *dev)
*/
const static int latency_ns = 5000;
-static int intel_get_fifo_size(struct drm_device *dev, int plane)
+static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dsparb = I915_READ(DSPARB);
int size;
- if (IS_I9XX(dev)) {
- if (plane == 0)
- size = dsparb & 0x7f;
- else
- size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
- (dsparb & 0x7f);
- } else if (IS_I85X(dev)) {
- if (plane == 0)
- size = dsparb & 0x1ff;
- else
- size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
- (dsparb & 0x1ff);
- size >>= 1; /* Convert to cachelines */
- } else if (IS_845G(dev)) {
+ if (plane == 0)
size = dsparb & 0x7f;
- size >>= 2; /* Convert to cachelines */
- } else {
- size = dsparb & 0x7f;
- size >>= 1; /* Convert to cachelines */
- }
+ else
+ size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
+ (dsparb & 0x7f);
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
+
+static int i85x_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ if (plane == 0)
+ size = dsparb & 0x1ff;
+ else
+ size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
+ (dsparb & 0x1ff);
+ size >>= 1; /* Convert to cachelines */
DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
size);
return size;
}
-static void g4x_update_wm(struct drm_device *dev)
+static int i845_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ size = dsparb & 0x7f;
+ size >>= 2; /* Convert to cachelines */
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
+
+static int i830_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ size = dsparb & 0x7f;
+ size >>= 1; /* Convert to cachelines */
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
+
+static void g4x_update_wm(struct drm_device *dev, int unused, int unused2,
+ int unused3, int unused4)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 fw_blc_self = I915_READ(FW_BLC_SELF);
I915_WRITE(FW_BLC_SELF, fw_blc_self);
}
-static void i965_update_wm(struct drm_device *dev)
+static void i965_update_wm(struct drm_device *dev, int unused, int unused2,
+ int unused3, int unused4)
{
struct drm_i915_private *dev_priv = dev->dev_private;
cacheline_size = planea_params.cacheline_size;
/* Update per-plane FIFO sizes */
- planea_params.fifo_size = intel_get_fifo_size(dev, 0);
- planeb_params.fifo_size = intel_get_fifo_size(dev, 1);
+ planea_params.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
+ planeb_params.fifo_size = dev_priv->display.get_fifo_size(dev, 1);
planea_wm = intel_calculate_wm(planea_clock, &planea_params,
pixel_size, latency_ns);
I915_WRITE(FW_BLC2, fwater_hi);
}
-static void i830_update_wm(struct drm_device *dev, int planea_clock,
- int pixel_size)
+static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
+ int unused2, int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
int planea_wm;
- i830_wm_info.fifo_size = intel_get_fifo_size(dev, 0);
+ i830_wm_info.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
pixel_size, latency_ns);
*/
static void intel_update_watermarks(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
int sr_hdisplay = 0;
else if (IS_IGD(dev))
igd_disable_cxsr(dev);
- if (IS_G4X(dev))
- g4x_update_wm(dev);
- else if (IS_I965G(dev))
- i965_update_wm(dev);
- else if (IS_I9XX(dev) || IS_MOBILE(dev))
- i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay,
- pixel_size);
- else
- i830_update_wm(dev, planea_clock, pixel_size);
+ dev_priv->display.update_wm(dev, planea_clock, planeb_clock,
+ sr_hdisplay, pixel_size);
}
static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
int fp_reg = (pipe == 0) ? FPA0 : FPB0;
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
- int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
- int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+ int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE;
+ int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS;
int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
int refclk, num_outputs = 0;
intel_clock_t clock, reduced_clock;
enable color space conversion */
if (!IS_IGDNG(dev)) {
if (pipe == 0)
- dspcntr |= DISPPLANE_SEL_PIPE_A;
+ dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
else
dspcntr |= DISPPLANE_SEL_PIPE_B;
}
* XXX: No double-wide on 915GM pipe B. Is that the only reason for the
* pipe == 0 check?
*/
- if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10)
+ if (mode->clock >
+ dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
pipeconf |= PIPEACONF_DOUBLE_WIDE;
else
pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
udelay(150);
if (IS_I965G(dev) && !IS_IGDNG(dev)) {
- sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+ if (is_sdvo) {
+ sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ } else
+ I915_WRITE(dpll_md_reg, 0);
} else {
/* write it again -- the BIOS does, after all */
I915_WRITE(dpll_reg, dpll);
/* Flush the plane changes */
ret = intel_pipe_set_base(crtc, x, y, old_fb);
+ if ((IS_I965G(dev) || plane == 0))
+ intel_update_fbc(crtc, &crtc->mode);
+
intel_update_watermarks(dev);
drm_vblank_post_modeset(dev, pipe);
struct drm_gem_object *bo;
struct drm_i915_gem_object *obj_priv;
int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
uint32_t temp = I915_READ(control);
i915_gem_object_unpin(intel_crtc->cursor_bo);
drm_gem_object_unreference(intel_crtc->cursor_bo);
}
+
+ if ((IS_I965G(dev) || plane == 0))
+ intel_update_fbc(crtc, &crtc->mode);
+
mutex_unlock(&dev->struct_mutex);
intel_crtc->cursor_addr = addr;
intel_crtc->lut_b[i] = i;
}
+ /* Swap pipes & planes for FBC on pre-965 */
+ intel_crtc->pipe = pipe;
+ intel_crtc->plane = pipe;
+ if (IS_MOBILE(dev) && (IS_I9XX(dev) && !IS_I965G(dev))) {
+ DRM_DEBUG("swapping pipes & planes for FBC\n");
+ intel_crtc->plane = ((pipe == 0) ? 1 : 0);
+ }
+
intel_crtc->cursor_addr = 0;
intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
}
}
+/* Set up chip specific display functions */
+static void intel_init_display(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* We always want a DPMS function */
+ if (IS_IGDNG(dev))
+ dev_priv->display.dpms = igdng_crtc_dpms;
+ else
+ dev_priv->display.dpms = i9xx_crtc_dpms;
+
+ /* Only mobile has FBC, leave pointers NULL for other chips */
+ if (IS_MOBILE(dev)) {
+ if (IS_GM45(dev)) {
+ dev_priv->display.fbc_enabled = g4x_fbc_enabled;
+ dev_priv->display.enable_fbc = g4x_enable_fbc;
+ dev_priv->display.disable_fbc = g4x_disable_fbc;
+ } else if (IS_I965GM(dev) || IS_I945GM(dev) || IS_I915GM(dev)) {
+ dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
+ dev_priv->display.enable_fbc = i8xx_enable_fbc;
+ dev_priv->display.disable_fbc = i8xx_disable_fbc;
+ }
+ /* 855GM needs testing */
+ }
+
+ /* Returns the core display clock speed */
+ if (IS_I945G(dev))
+ dev_priv->display.get_display_clock_speed =
+ i945_get_display_clock_speed;
+ else if (IS_I915G(dev))
+ dev_priv->display.get_display_clock_speed =
+ i915_get_display_clock_speed;
+ else if (IS_I945GM(dev) || IS_845G(dev) || IS_IGDGM(dev))
+ dev_priv->display.get_display_clock_speed =
+ i9xx_misc_get_display_clock_speed;
+ else if (IS_I915GM(dev))
+ dev_priv->display.get_display_clock_speed =
+ i915gm_get_display_clock_speed;
+ else if (IS_I865G(dev))
+ dev_priv->display.get_display_clock_speed =
+ i865_get_display_clock_speed;
+ else if (IS_I855(dev))
+ dev_priv->display.get_display_clock_speed =
+ i855_get_display_clock_speed;
+ else /* 852, 830 */
+ dev_priv->display.get_display_clock_speed =
+ i830_get_display_clock_speed;
+
+ /* For FIFO watermark updates */
+ if (IS_G4X(dev))
+ dev_priv->display.update_wm = g4x_update_wm;
+ else if (IS_I965G(dev))
+ dev_priv->display.update_wm = i965_update_wm;
+ else if (IS_I9XX(dev) || IS_MOBILE(dev)) {
+ dev_priv->display.update_wm = i9xx_update_wm;
+ dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
+ } else {
+ if (IS_I85X(dev))
+ dev_priv->display.get_fifo_size = i85x_get_fifo_size;
+ else if (IS_845G(dev))
+ dev_priv->display.get_fifo_size = i845_get_fifo_size;
+ else
+ dev_priv->display.get_fifo_size = i830_get_fifo_size;
+ dev_priv->display.update_wm = i830_update_wm;
+ }
+}
+
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev->mode_config.funcs = (void *)&intel_mode_funcs;
+ intel_init_display(dev);
+
if (IS_I965G(dev)) {
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
mutex_unlock(&dev->struct_mutex);
+ if (dev_priv->display.disable_fbc)
+ dev_priv->display.disable_fbc(dev);
+
drm_mode_config_cleanup(dev);
}
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
+#include "i915_drv.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
struct intel_crtc {
struct drm_crtc base;
- int pipe;
- int plane;
+ enum pipe pipe;
+ enum plane plane;
struct drm_gem_object *cursor_bo;
uint32_t cursor_addr;
u8 lut_r[256], lut_g[256], lut_b[256];
* Jesse Barnes <jesse.barnes@intel.com>
*/
+#include <acpi/button.h>
#include <linux/dmi.h>
#include <linux/i2c.h>
#include "drmP.h"
goto out;
}
+ /* full screen scale for now */
+ if (IS_IGDNG(dev))
+ goto out;
+
/* 965+ wants fuzzy fitting */
if (IS_I965G(dev))
pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
* to register description and PRM.
* Change the value here to see the borders for debugging
*/
- I915_WRITE(BCLRPAT_A, 0);
- I915_WRITE(BCLRPAT_B, 0);
+ if (!IS_IGDNG(dev)) {
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+ }
switch (lvds_priv->fitting_mode) {
case DRM_MODE_SCALE_CENTER:
* settings.
*/
- /* No panel fitting yet, fixme */
if (IS_IGDNG(dev))
return;
I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
+/* Some lid devices report incorrect lid status, assume they're connected */
+static const struct dmi_system_id bad_lid_status[] = {
+ {
+ .ident = "Aspire One",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
+ },
+ },
+ { }
+};
+
/**
* Detect the LVDS connection.
*
- * This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have
- * been set up if the LVDS was actually connected anyway.
+ * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
+ * connected and closed means disconnected. We also send hotplug events as
+ * needed, using lid status notification from the input layer.
*/
static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
{
- return connector_status_connected;
+ enum drm_connector_status status = connector_status_connected;
+
+ if (!acpi_lid_open() && !dmi_check_system(bad_lid_status))
+ status = connector_status_disconnected;
+
+ return status;
}
/**
return 0;
}
+static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
+ void *unused)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(nb, struct drm_i915_private, lid_notifier);
+ struct drm_device *dev = dev_priv->dev;
+
+ if (acpi_lid_open() && !dev_priv->suspended) {
+ mutex_lock(&dev->mode_config.mutex);
+ drm_helper_resume_force_mode(dev);
+ mutex_unlock(&dev->mode_config.mutex);
+ }
+
+ drm_sysfs_hotplug_event(dev_priv->dev);
+
+ return NOTIFY_OK;
+}
+
/**
* intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
*/
static void intel_lvds_destroy(struct drm_connector *connector)
{
+ struct drm_device *dev = connector->dev;
struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_i915_private *dev_priv = dev->dev_private;
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
+ if (dev_priv->lid_notifier.notifier_call)
+ acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
pwm |= PWM_PCH_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
}
+ dev_priv->lid_notifier.notifier_call = intel_lid_notify;
+ if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
+ DRM_DEBUG("lid notifier registration failed\n");
+ dev_priv->lid_notifier.notifier_call = NULL;
+ }
drm_sysfs_connector_add(connector);
return;
struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2;
struct intel_sdvo_dtd save_output_dtd[16];
u32 save_SDVOX;
+ /* add the property for the SDVO-TV */
+ struct drm_property *left_property;
+ struct drm_property *right_property;
+ struct drm_property *top_property;
+ struct drm_property *bottom_property;
+ struct drm_property *hpos_property;
+ struct drm_property *vpos_property;
+
+ /* add the property for the SDVO-TV/LVDS */
+ struct drm_property *brightness_property;
+ struct drm_property *contrast_property;
+ struct drm_property *saturation_property;
+ struct drm_property *hue_property;
+
+ /* Add variable to record current setting for the above property */
+ u32 left_margin, right_margin, top_margin, bottom_margin;
+ /* this is to get the range of margin.*/
+ u32 max_hscan, max_vscan;
+ u32 max_hpos, cur_hpos;
+ u32 max_vpos, cur_vpos;
+ u32 cur_brightness, max_brightness;
+ u32 cur_contrast, max_contrast;
+ u32 cur_saturation, max_saturation;
+ u32 cur_hue, max_hue;
};
static bool
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT),
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT),
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS),
+ /* Add the op code for SDVO enhancements */
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_POSITION_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POSITION_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_POSITION_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_POSITION_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POSITION_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_POSITION_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V),
/* HDMI op code */
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE),
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE),
status = intel_sdvo_read_response(output, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
- DRM_DEBUG("%s: Failed to set TV format\n",
+ DRM_DEBUG_KMS("%s: Failed to set TV format\n",
SDVO_NAME(sdvo_priv));
}
return 1;
}
+static
+void intel_sdvo_destroy_enhance_property(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct drm_device *dev = connector->dev;
+
+ if (sdvo_priv->is_tv) {
+ if (sdvo_priv->left_property)
+ drm_property_destroy(dev, sdvo_priv->left_property);
+ if (sdvo_priv->right_property)
+ drm_property_destroy(dev, sdvo_priv->right_property);
+ if (sdvo_priv->top_property)
+ drm_property_destroy(dev, sdvo_priv->top_property);
+ if (sdvo_priv->bottom_property)
+ drm_property_destroy(dev, sdvo_priv->bottom_property);
+ if (sdvo_priv->hpos_property)
+ drm_property_destroy(dev, sdvo_priv->hpos_property);
+ if (sdvo_priv->vpos_property)
+ drm_property_destroy(dev, sdvo_priv->vpos_property);
+ }
+ if (sdvo_priv->is_tv) {
+ if (sdvo_priv->saturation_property)
+ drm_property_destroy(dev,
+ sdvo_priv->saturation_property);
+ if (sdvo_priv->contrast_property)
+ drm_property_destroy(dev,
+ sdvo_priv->contrast_property);
+ if (sdvo_priv->hue_property)
+ drm_property_destroy(dev, sdvo_priv->hue_property);
+ }
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
+ if (sdvo_priv->brightness_property)
+ drm_property_destroy(dev,
+ sdvo_priv->brightness_property);
+ }
+ return;
+}
+
static void intel_sdvo_destroy(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
drm_property_destroy(connector->dev,
sdvo_priv->tv_format_property);
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds)
+ intel_sdvo_destroy_enhance_property(connector);
+
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
struct drm_crtc *crtc = encoder->crtc;
int ret = 0;
bool changed = false;
+ uint8_t cmd, status;
+ uint16_t temp_value;
ret = drm_connector_property_set_value(connector, property, val);
if (ret < 0)
sdvo_priv->tv_format_name = sdvo_priv->tv_format_supported[val];
changed = true;
- } else {
- ret = -EINVAL;
- goto out;
}
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
+ cmd = 0;
+ temp_value = val;
+ if (sdvo_priv->left_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->right_property, val);
+ if (sdvo_priv->left_margin == temp_value)
+ goto out;
+
+ sdvo_priv->left_margin = temp_value;
+ sdvo_priv->right_margin = temp_value;
+ temp_value = sdvo_priv->max_hscan -
+ sdvo_priv->left_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_H;
+ } else if (sdvo_priv->right_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->left_property, val);
+ if (sdvo_priv->right_margin == temp_value)
+ goto out;
+
+ sdvo_priv->left_margin = temp_value;
+ sdvo_priv->right_margin = temp_value;
+ temp_value = sdvo_priv->max_hscan -
+ sdvo_priv->left_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_H;
+ } else if (sdvo_priv->top_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->bottom_property, val);
+ if (sdvo_priv->top_margin == temp_value)
+ goto out;
+
+ sdvo_priv->top_margin = temp_value;
+ sdvo_priv->bottom_margin = temp_value;
+ temp_value = sdvo_priv->max_vscan -
+ sdvo_priv->top_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_V;
+ } else if (sdvo_priv->bottom_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->top_property, val);
+ if (sdvo_priv->bottom_margin == temp_value)
+ goto out;
+ sdvo_priv->top_margin = temp_value;
+ sdvo_priv->bottom_margin = temp_value;
+ temp_value = sdvo_priv->max_vscan -
+ sdvo_priv->top_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_V;
+ } else if (sdvo_priv->hpos_property == property) {
+ if (sdvo_priv->cur_hpos == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_POSITION_H;
+ sdvo_priv->cur_hpos = temp_value;
+ } else if (sdvo_priv->vpos_property == property) {
+ if (sdvo_priv->cur_vpos == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_POSITION_V;
+ sdvo_priv->cur_vpos = temp_value;
+ } else if (sdvo_priv->saturation_property == property) {
+ if (sdvo_priv->cur_saturation == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_SATURATION;
+ sdvo_priv->cur_saturation = temp_value;
+ } else if (sdvo_priv->contrast_property == property) {
+ if (sdvo_priv->cur_contrast == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_CONTRAST;
+ sdvo_priv->cur_contrast = temp_value;
+ } else if (sdvo_priv->hue_property == property) {
+ if (sdvo_priv->cur_hue == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_HUE;
+ sdvo_priv->cur_hue = temp_value;
+ } else if (sdvo_priv->brightness_property == property) {
+ if (sdvo_priv->cur_brightness == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_BRIGHTNESS;
+ sdvo_priv->cur_brightness = temp_value;
+ }
+ if (cmd) {
+ intel_sdvo_write_cmd(intel_output, cmd, &temp_value, 2);
+ status = intel_sdvo_read_response(intel_output,
+ NULL, 0);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO command \n");
+ return -EINVAL;
+ }
+ changed = true;
+ }
+ }
if (changed && crtc)
drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
crtc->y, crtc->fb);
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_LVDS0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
}
+static void intel_sdvo_create_enhance_property(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_enhancements_reply sdvo_data;
+ struct drm_device *dev = connector->dev;
+ uint8_t status;
+ uint16_t response, data_value[2];
+
+ intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
+ NULL, 0);
+ status = intel_sdvo_read_response(intel_output, &sdvo_data,
+ sizeof(sdvo_data));
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS(" incorrect response is returned\n");
+ return;
+ }
+ response = *((uint16_t *)&sdvo_data);
+ if (!response) {
+ DRM_DEBUG_KMS("No enhancement is supported\n");
+ return;
+ }
+ if (sdvo_priv->is_tv) {
+ /* when horizontal overscan is supported, Add the left/right
+ * property
+ */
+ if (sdvo_data.overscan_h) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_OVERSCAN_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO max "
+ "h_overscan\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_OVERSCAN_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO h_overscan\n");
+ return;
+ }
+ sdvo_priv->max_hscan = data_value[0];
+ sdvo_priv->left_margin = data_value[0] - response;
+ sdvo_priv->right_margin = sdvo_priv->left_margin;
+ sdvo_priv->left_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "left_margin", 2);
+ sdvo_priv->left_property->values[0] = 0;
+ sdvo_priv->left_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->left_property,
+ sdvo_priv->left_margin);
+ sdvo_priv->right_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "right_margin", 2);
+ sdvo_priv->right_property->values[0] = 0;
+ sdvo_priv->right_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->right_property,
+ sdvo_priv->right_margin);
+ DRM_DEBUG_KMS("h_overscan: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.overscan_v) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_OVERSCAN_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO max "
+ "v_overscan\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_OVERSCAN_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO v_overscan\n");
+ return;
+ }
+ sdvo_priv->max_vscan = data_value[0];
+ sdvo_priv->top_margin = data_value[0] - response;
+ sdvo_priv->bottom_margin = sdvo_priv->top_margin;
+ sdvo_priv->top_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "top_margin", 2);
+ sdvo_priv->top_property->values[0] = 0;
+ sdvo_priv->top_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->top_property,
+ sdvo_priv->top_margin);
+ sdvo_priv->bottom_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "bottom_margin", 2);
+ sdvo_priv->bottom_property->values[0] = 0;
+ sdvo_priv->bottom_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->bottom_property,
+ sdvo_priv->bottom_margin);
+ DRM_DEBUG_KMS("v_overscan: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.position_h) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_POSITION_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max h_pos\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_POSITION_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get h_postion\n");
+ return;
+ }
+ sdvo_priv->max_hpos = data_value[0];
+ sdvo_priv->cur_hpos = response;
+ sdvo_priv->hpos_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "hpos", 2);
+ sdvo_priv->hpos_property->values[0] = 0;
+ sdvo_priv->hpos_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->hpos_property,
+ sdvo_priv->cur_hpos);
+ DRM_DEBUG_KMS("h_position: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.position_v) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_POSITION_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max v_pos\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_POSITION_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get v_postion\n");
+ return;
+ }
+ sdvo_priv->max_vpos = data_value[0];
+ sdvo_priv->cur_vpos = response;
+ sdvo_priv->vpos_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "vpos", 2);
+ sdvo_priv->vpos_property->values[0] = 0;
+ sdvo_priv->vpos_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->vpos_property,
+ sdvo_priv->cur_vpos);
+ DRM_DEBUG_KMS("v_position: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ }
+ if (sdvo_priv->is_tv) {
+ if (sdvo_data.saturation) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_SATURATION, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max sat\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_SATURATION, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get sat\n");
+ return;
+ }
+ sdvo_priv->max_saturation = data_value[0];
+ sdvo_priv->cur_saturation = response;
+ sdvo_priv->saturation_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "saturation", 2);
+ sdvo_priv->saturation_property->values[0] = 0;
+ sdvo_priv->saturation_property->values[1] =
+ data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->saturation_property,
+ sdvo_priv->cur_saturation);
+ DRM_DEBUG_KMS("saturation: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.contrast) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_CONTRAST, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max contrast\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_CONTRAST, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get contrast\n");
+ return;
+ }
+ sdvo_priv->max_contrast = data_value[0];
+ sdvo_priv->cur_contrast = response;
+ sdvo_priv->contrast_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "contrast", 2);
+ sdvo_priv->contrast_property->values[0] = 0;
+ sdvo_priv->contrast_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->contrast_property,
+ sdvo_priv->cur_contrast);
+ DRM_DEBUG_KMS("contrast: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.hue) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_HUE, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max hue\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_HUE, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get hue\n");
+ return;
+ }
+ sdvo_priv->max_hue = data_value[0];
+ sdvo_priv->cur_hue = response;
+ sdvo_priv->hue_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "hue", 2);
+ sdvo_priv->hue_property->values[0] = 0;
+ sdvo_priv->hue_property->values[1] =
+ data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->hue_property,
+ sdvo_priv->cur_hue);
+ DRM_DEBUG_KMS("hue: max %d, default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ }
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
+ if (sdvo_data.brightness) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_BRIGHTNESS, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max bright\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_BRIGHTNESS, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get brigh\n");
+ return;
+ }
+ sdvo_priv->max_brightness = data_value[0];
+ sdvo_priv->cur_brightness = response;
+ sdvo_priv->brightness_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "brightness", 2);
+ sdvo_priv->brightness_property->values[0] = 0;
+ sdvo_priv->brightness_property->values[1] =
+ data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->brightness_property,
+ sdvo_priv->cur_brightness);
+ DRM_DEBUG_KMS("brightness: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ }
+ return;
+}
+
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
struct drm_connector *connector;
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
if (sdvo_priv->is_tv)
intel_sdvo_tv_create_property(connector);
+
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds)
+ intel_sdvo_create_enhance_property(connector);
+
drm_sysfs_connector_add(connector);
intel_sdvo_select_ddc_bus(sdvo_priv);
This driver can also be built as a module. If so, the module
will be called f75375s.
-config SENSORS_FSCHER
- tristate "FSC Hermes (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Hermes sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscher.
-
-config SENSORS_FSCPOS
- tristate "FSC Poseidon (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Poseidon sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscpos.
-
config SENSORS_FSCHMD
tristate "Fujitsu Siemens Computers sensor chips"
depends on X86 && I2C
will be called gl520sm.
config SENSORS_CORETEMP
- tristate "Intel Core (2) Duo/Solo temperature sensor"
+ tristate "Intel Core/Core2/Atom temperature sensor"
depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor inside your CPU. Supported all are all known variants
- of Intel Core family.
+ sensor inside your CPU. Most of the family 6 CPUs
+ are supported. Check documentation/driver for details.
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
-obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o
-obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
obj-$(CONFIG_SENSORS_G760A) += g760a.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
#define ADM1031_REG_PWM (0x22)
#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr))
+#define ADM1031_REG_TEMP_OFFSET(nr) (0x0d + (nr))
#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4 * (nr))
#define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4 * (nr))
#define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4 * (nr))
u8 auto_temp_min[3];
u8 auto_temp_off[3];
u8 auto_temp_max[3];
+ s8 temp_offset[3];
s8 temp_min[3];
s8 temp_max[3];
s8 temp_crit[3];
#define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125)
+#define TEMP_OFFSET_TO_REG(val) (TEMP_TO_REG(val) & 0x8f)
+#define TEMP_OFFSET_FROM_REG(val) TEMP_FROM_REG((val) < 0 ? \
+ (val) | 0x70 : (val))
+
#define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
static int FAN_TO_REG(int reg, int div)
(((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
}
+static ssize_t show_temp_offset(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct adm1031_data *data = adm1031_update_device(dev);
+ return sprintf(buf, "%d\n",
+ TEMP_OFFSET_FROM_REG(data->temp_offset[nr]));
+}
static ssize_t show_temp_min(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct adm1031_data *data = adm1031_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
}
+static ssize_t set_temp_offset(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1031_data *data = i2c_get_clientdata(client);
+ int nr = to_sensor_dev_attr(attr)->index;
+ int val;
+
+ val = simple_strtol(buf, NULL, 10);
+ val = SENSORS_LIMIT(val, -15000, 15000);
+ mutex_lock(&data->update_lock);
+ data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val);
+ adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr),
+ data->temp_offset[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
#define temp_reg(offset) \
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \
+ show_temp_offset, set_temp_offset, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
show_temp_min, set_temp_min, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_auto_fan1_channel.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_offset.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_auto_fan2_channel.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_offset.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
}
data->temp[chan] = newh;
+ data->temp_offset[chan] =
+ adm1031_read_value(client,
+ ADM1031_REG_TEMP_OFFSET(chan));
data->temp_min[chan] =
adm1031_read_value(client,
ADM1031_REG_TEMP_MIN(chan));
/* The 100C is default for both mobile and non mobile CPUs */
int tjmax = 100000;
- int ismobile = 1;
+ int tjmax_ee = 85000;
+ int usemsr_ee = 1;
int err;
u32 eax, edx;
/* Early chips have no MSR for TjMax */
if ((c->x86_model == 0xf) && (c->x86_mask < 4)) {
- ismobile = 0;
+ usemsr_ee = 0;
}
- if ((c->x86_model > 0xe) && (ismobile)) {
+ /* Atoms seems to have TjMax at 90C */
+
+ if (c->x86_model == 0x1c) {
+ usemsr_ee = 0;
+ tjmax = 90000;
+ }
+
+ if ((c->x86_model > 0xe) && (usemsr_ee)) {
+ u8 platform_id;
/* Now we can detect the mobile CPU using Intel provided table
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
dev_warn(dev,
"Unable to access MSR 0x17, assuming desktop"
" CPU\n");
- ismobile = 0;
- } else if (!(eax & 0x10000000)) {
- ismobile = 0;
+ usemsr_ee = 0;
+ } else if (c->x86_model < 0x17 && !(eax & 0x10000000)) {
+ /* Trust bit 28 up to Penryn, I could not find any
+ documentation on that; if you happen to know
+ someone at Intel please ask */
+ usemsr_ee = 0;
+ } else {
+ /* Platform ID bits 52:50 (EDX starts at bit 32) */
+ platform_id = (edx >> 18) & 0x7;
+
+ /* Mobile Penryn CPU seems to be platform ID 7 or 5
+ (guesswork) */
+ if ((c->x86_model == 0x17) &&
+ ((platform_id == 5) || (platform_id == 7))) {
+ /* If MSR EE bit is set, set it to 90 degrees C,
+ otherwise 105 degrees C */
+ tjmax_ee = 90000;
+ tjmax = 105000;
+ }
}
}
- if (ismobile || c->x86_model == 0x1c) {
+ if (usemsr_ee) {
err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx);
if (err) {
"Unable to access MSR 0xEE, for Tjmax, left"
" at default");
} else if (eax & 0x40000000) {
- tjmax = 85000;
+ tjmax = tjmax_ee;
}
- } else {
+ /* if we dont use msr EE it means we are desktop CPU (with exeception
+ of Atom) */
+ } else if (tjmax == 100000) {
dev_warn(dev, "Using relative temperature scale!\n");
}
platform_set_drvdata(pdev, data);
/* read the still undocumented IA32_TEMPERATURE_TARGET it exists
- on older CPUs but not in this register */
+ on older CPUs but not in this register, Atoms don't have it either */
- if (c->x86_model > 0xe) {
+ if ((c->x86_model > 0xe) && (c->x86_model != 0x1c)) {
err = rdmsr_safe_on_cpu(data->id, 0x1a2, &eax, &edx);
if (err) {
dev_warn(&pdev->dev, "Unable to read"
for_each_online_cpu(i) {
struct cpuinfo_x86 *c = &cpu_data(i);
- /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
+ /* check if family 6, models 0xe (Pentium M DC),
+ 0xf (Core 2 DC 65nm), 0x16 (Core 2 SC 65nm),
+ 0x17 (Penryn 45nm), 0x1a (Nehalem), 0x1c (Atom),
+ 0x1e (Lynnfield) */
if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
!((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
(c->x86_model == 0x16) || (c->x86_model == 0x17) ||
- (c->x86_model == 0x1A) || (c->x86_model == 0x1c))) {
+ (c->x86_model == 0x1a) || (c->x86_model == 0x1c) ||
+ (c->x86_model == 0x1e))) {
/* supported CPU not found, but report the unknown
family 6 CPU */
+++ /dev/null
-/*
- * fscher.c - Part of lm_sensors, Linux kernel modules for hardware
- * monitoring
- * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * fujitsu siemens hermes chip,
- * module based on fscpos.c
- * Copyright (C) 2000 Hermann Jung <hej@odn.de>
- * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- * and Philip Edelbrock <phil@netroedge.com>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/hwmon.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-
-/*
- * Addresses to scan
- */
-
-static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-
-I2C_CLIENT_INSMOD_1(fscher);
-
-/*
- * The FSCHER registers
- */
-
-/* chip identification */
-#define FSCHER_REG_IDENT_0 0x00
-#define FSCHER_REG_IDENT_1 0x01
-#define FSCHER_REG_IDENT_2 0x02
-#define FSCHER_REG_REVISION 0x03
-
-/* global control and status */
-#define FSCHER_REG_EVENT_STATE 0x04
-#define FSCHER_REG_CONTROL 0x05
-
-/* watchdog */
-#define FSCHER_REG_WDOG_PRESET 0x28
-#define FSCHER_REG_WDOG_STATE 0x23
-#define FSCHER_REG_WDOG_CONTROL 0x21
-
-/* fan 0 */
-#define FSCHER_REG_FAN0_MIN 0x55
-#define FSCHER_REG_FAN0_ACT 0x0e
-#define FSCHER_REG_FAN0_STATE 0x0d
-#define FSCHER_REG_FAN0_RIPPLE 0x0f
-
-/* fan 1 */
-#define FSCHER_REG_FAN1_MIN 0x65
-#define FSCHER_REG_FAN1_ACT 0x6b
-#define FSCHER_REG_FAN1_STATE 0x62
-#define FSCHER_REG_FAN1_RIPPLE 0x6f
-
-/* fan 2 */
-#define FSCHER_REG_FAN2_MIN 0xb5
-#define FSCHER_REG_FAN2_ACT 0xbb
-#define FSCHER_REG_FAN2_STATE 0xb2
-#define FSCHER_REG_FAN2_RIPPLE 0xbf
-
-/* voltage supervision */
-#define FSCHER_REG_VOLT_12 0x45
-#define FSCHER_REG_VOLT_5 0x42
-#define FSCHER_REG_VOLT_BATT 0x48
-
-/* temperature 0 */
-#define FSCHER_REG_TEMP0_ACT 0x64
-#define FSCHER_REG_TEMP0_STATE 0x71
-
-/* temperature 1 */
-#define FSCHER_REG_TEMP1_ACT 0x32
-#define FSCHER_REG_TEMP1_STATE 0x81
-
-/* temperature 2 */
-#define FSCHER_REG_TEMP2_ACT 0x35
-#define FSCHER_REG_TEMP2_STATE 0x91
-
-/*
- * Functions declaration
- */
-
-static int fscher_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int fscher_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info);
-static int fscher_remove(struct i2c_client *client);
-static struct fscher_data *fscher_update_device(struct device *dev);
-static void fscher_init_client(struct i2c_client *client);
-
-static int fscher_read_value(struct i2c_client *client, u8 reg);
-static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);
-
-/*
- * Driver data (common to all clients)
- */
-
-static const struct i2c_device_id fscher_id[] = {
- { "fscher", fscher },
- { }
-};
-
-static struct i2c_driver fscher_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "fscher",
- },
- .probe = fscher_probe,
- .remove = fscher_remove,
- .id_table = fscher_id,
- .detect = fscher_detect,
- .address_data = &addr_data,
-};
-
-/*
- * Client data (each client gets its own)
- */
-
-struct fscher_data {
- struct device *hwmon_dev;
- struct mutex update_lock;
- char valid; /* zero until following fields are valid */
- unsigned long last_updated; /* in jiffies */
-
- /* register values */
- u8 revision; /* revision of chip */
- u8 global_event; /* global event status */
- u8 global_control; /* global control register */
- u8 watchdog[3]; /* watchdog */
- u8 volt[3]; /* 12, 5, battery voltage */
- u8 temp_act[3]; /* temperature */
- u8 temp_status[3]; /* status of sensor */
- u8 fan_act[3]; /* fans revolutions per second */
- u8 fan_status[3]; /* fan status */
- u8 fan_min[3]; /* fan min value for rps */
- u8 fan_ripple[3]; /* divider for rps */
-};
-
-/*
- * Sysfs stuff
- */
-
-#define sysfs_r(kind, sub, offset, reg) \
-static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \
-static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \
-static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct fscher_data *data = fscher_update_device(dev); \
- return show_##kind##sub(data, buf, (offset)); \
-}
-
-#define sysfs_w(kind, sub, offset, reg) \
-static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
-static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \
-static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscher_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, (offset), reg); \
-}
-
-#define sysfs_rw_n(kind, sub, offset, reg) \
-sysfs_r(kind, sub, offset, reg) \
-sysfs_w(kind, sub, offset, reg) \
-static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub);
-
-#define sysfs_rw(kind, sub, reg) \
-sysfs_r(kind, sub, 0, reg) \
-sysfs_w(kind, sub, 0, reg) \
-static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub);
-
-#define sysfs_ro_n(kind, sub, offset, reg) \
-sysfs_r(kind, sub, offset, reg) \
-static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL);
-
-#define sysfs_ro(kind, sub, reg) \
-sysfs_r(kind, sub, 0, reg) \
-static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);
-
-#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
-sysfs_rw_n(pwm, , offset, reg_min) \
-sysfs_rw_n(fan, _status, offset, reg_status) \
-sysfs_rw_n(fan, _div , offset, reg_ripple) \
-sysfs_ro_n(fan, _input , offset, reg_act)
-
-#define sysfs_temp(offset, reg_status, reg_act) \
-sysfs_rw_n(temp, _status, offset, reg_status) \
-sysfs_ro_n(temp, _input , offset, reg_act)
-
-#define sysfs_in(offset, reg_act) \
-sysfs_ro_n(in, _input, offset, reg_act)
-
-#define sysfs_revision(reg_revision) \
-sysfs_ro(revision, , reg_revision)
-
-#define sysfs_alarms(reg_events) \
-sysfs_ro(alarms, , reg_events)
-
-#define sysfs_control(reg_control) \
-sysfs_rw(control, , reg_control)
-
-#define sysfs_watchdog(reg_control, reg_status, reg_preset) \
-sysfs_rw(watchdog, _control, reg_control) \
-sysfs_rw(watchdog, _status , reg_status) \
-sysfs_rw(watchdog, _preset , reg_preset)
-
-sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN,
- FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT)
-sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN,
- FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT)
-sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN,
- FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT)
-
-sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT)
-sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT)
-sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT)
-
-sysfs_in(0, FSCHER_REG_VOLT_12)
-sysfs_in(1, FSCHER_REG_VOLT_5)
-sysfs_in(2, FSCHER_REG_VOLT_BATT)
-
-sysfs_revision(FSCHER_REG_REVISION)
-sysfs_alarms(FSCHER_REG_EVENTS)
-sysfs_control(FSCHER_REG_CONTROL)
-sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET)
-
-static struct attribute *fscher_attributes[] = {
- &dev_attr_revision.attr,
- &dev_attr_alarms.attr,
- &dev_attr_control.attr,
-
- &dev_attr_watchdog_status.attr,
- &dev_attr_watchdog_control.attr,
- &dev_attr_watchdog_preset.attr,
-
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
-
- &dev_attr_fan1_status.attr,
- &dev_attr_fan1_div.attr,
- &dev_attr_fan1_input.attr,
- &dev_attr_pwm1.attr,
- &dev_attr_fan2_status.attr,
- &dev_attr_fan2_div.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_pwm2.attr,
- &dev_attr_fan3_status.attr,
- &dev_attr_fan3_div.attr,
- &dev_attr_fan3_input.attr,
- &dev_attr_pwm3.attr,
-
- &dev_attr_temp1_status.attr,
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_status.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp3_status.attr,
- &dev_attr_temp3_input.attr,
- NULL
-};
-
-static const struct attribute_group fscher_group = {
- .attrs = fscher_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int fscher_detect(struct i2c_client *new_client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = new_client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- /* Do the remaining detection unless force or force_fscher parameter */
- if (kind < 0) {
- if ((i2c_smbus_read_byte_data(new_client,
- FSCHER_REG_IDENT_0) != 0x48) /* 'H' */
- || (i2c_smbus_read_byte_data(new_client,
- FSCHER_REG_IDENT_1) != 0x45) /* 'E' */
- || (i2c_smbus_read_byte_data(new_client,
- FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */
- return -ENODEV;
- }
-
- strlcpy(info->type, "fscher", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int fscher_probe(struct i2c_client *new_client,
- const struct i2c_device_id *id)
-{
- struct fscher_data *data;
- int err;
-
- data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(new_client, data);
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- fscher_init_client(new_client);
-
- /* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
- goto exit_free;
-
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
-exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &fscher_group);
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static int fscher_remove(struct i2c_client *client)
-{
- struct fscher_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &fscher_group);
-
- kfree(data);
- return 0;
-}
-
-static int fscher_read_value(struct i2c_client *client, u8 reg)
-{
- dev_dbg(&client->dev, "read reg 0x%02x\n", reg);
-
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n",
- reg, value);
-
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new FSC Hermes. */
-static void fscher_init_client(struct i2c_client *client)
-{
- struct fscher_data *data = i2c_get_clientdata(client);
-
- /* Read revision from chip */
- data->revision = fscher_read_value(client, FSCHER_REG_REVISION);
-}
-
-static struct fscher_data *fscher_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct fscher_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
-
- dev_dbg(&client->dev, "Starting fscher update\n");
-
- data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT);
- data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT);
- data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT);
- data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE);
- data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE);
- data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE);
-
- data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12);
- data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5);
- data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT);
-
- data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT);
- data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT);
- data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT);
- data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE);
- data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE);
- data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE);
- data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN);
- data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN);
- data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN);
- data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE);
- data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE);
- data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE);
-
- data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET);
- data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE);
- data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);
-
- data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
- data->global_control = fscher_read_value(client,
- FSCHER_REG_CONTROL);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
-
-
-
-#define FAN_INDEX_FROM_NUM(nr) ((nr) - 1)
-
-static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 0..1, 3..7 reserved => mask with 0x04 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
-
- mutex_lock(&data->update_lock);
- data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 0..1, 3..7 reserved => mask with 0x04 */
- return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
-}
-
-static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- mutex_lock(&data->update_lock);
- data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
- fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
-}
-
-static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* supported values: 2, 4, 8 */
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- switch (v) {
- case 2: v = 1; break;
- case 4: v = 2; break;
- case 8: v = 3; break;
- default:
- dev_err(&client->dev, "fan_div value %ld not "
- "supported. Choose one of 2, 4 or 8!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
-
- /* bits 2..7 reserved => mask with 0x03 */
- data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
- data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;
-
- fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03));
-}
-
-#define RPM_FROM_REG(val) (val*60)
-
-static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)]));
-}
-
-
-
-#define TEMP_INDEX_FROM_NUM(nr) ((nr) - 1)
-
-static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 2..7 reserved, 0 read only => mask with 0x02 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
- mutex_lock(&data->update_lock);
- data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03);
-}
-
-#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
-
-static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)]));
-}
-
-/*
- * The final conversion is specified in sensors.conf, as it depends on
- * mainboard specific values. We export the registers contents as
- * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much
- * sense per se, but it minimizes the conversions count and keeps the
- * values within a usual range.
- */
-#define VOLT_FROM_REG(val) ((val) * 10)
-
-static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr]));
-}
-
-
-
-static ssize_t show_revision(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->revision);
-}
-
-
-
-static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 2, 5..6 reserved => mask with 0x9b */
- return sprintf(buf, "%u\n", data->global_event & 0x9b);
-}
-
-
-
-static ssize_t set_control(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 1..7 reserved => mask with 0x01 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
-
- mutex_lock(&data->update_lock);
- data->global_control = v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_control(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 1..7 reserved => mask with 0x01 */
- return sprintf(buf, "%u\n", data->global_control & 0x01);
-}
-
-
-
-static ssize_t set_watchdog_control(struct i2c_client *client, struct
- fscher_data *data, const char *buf, size_t count,
- int nr, int reg)
-{
- /* bits 0..3 reserved => mask with 0xf0 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
-
- mutex_lock(&data->update_lock);
- data->watchdog[2] &= ~0xf0;
- data->watchdog[2] |= v;
- fscher_write_value(client, reg, data->watchdog[2]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */
- return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0);
-}
-
-static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 0, 2..7 reserved => mask with 0x02 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
- mutex_lock(&data->update_lock);
- data->watchdog[1] &= ~v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 0, 2..7 reserved => mask with 0x02 */
- return sprintf(buf, "%u\n", data->watchdog[1] & 0x02);
-}
-
-static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
-
- mutex_lock(&data->update_lock);
- data->watchdog[0] = v;
- fscher_write_value(client, reg, data->watchdog[0]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->watchdog[0]);
-}
-
-static int __init sensors_fscher_init(void)
-{
- return i2c_add_driver(&fscher_driver);
-}
-
-static void __exit sensors_fscher_exit(void)
-{
- i2c_del_driver(&fscher_driver);
-}
-
-MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>");
-MODULE_DESCRIPTION("FSC Hermes driver");
-MODULE_LICENSE("GPL");
-
-module_init(sensors_fscher_init);
-module_exit(sensors_fscher_exit);
+++ /dev/null
-/*
- fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips
- Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*
- fujitsu siemens poseidon chip,
- module based on the old fscpos module by Hermann Jung <hej@odn.de> and
- the fscher module by Reinhard Nissl <rnissl@gmx.de>
-
- original module based on lm80.c
- Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- and Philip Edelbrock <phil@netroedge.com>
-
- Thanks to Jean Delvare for reviewing my code and suggesting a lot of
- improvements.
-*/
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/hwmon.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-
-/*
- * Addresses to scan
- */
-static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(fscpos);
-
-/*
- * The FSCPOS registers
- */
-
-/* chip identification */
-#define FSCPOS_REG_IDENT_0 0x00
-#define FSCPOS_REG_IDENT_1 0x01
-#define FSCPOS_REG_IDENT_2 0x02
-#define FSCPOS_REG_REVISION 0x03
-
-/* global control and status */
-#define FSCPOS_REG_EVENT_STATE 0x04
-#define FSCPOS_REG_CONTROL 0x05
-
-/* watchdog */
-#define FSCPOS_REG_WDOG_PRESET 0x28
-#define FSCPOS_REG_WDOG_STATE 0x23
-#define FSCPOS_REG_WDOG_CONTROL 0x21
-
-/* voltages */
-#define FSCPOS_REG_VOLT_12 0x45
-#define FSCPOS_REG_VOLT_5 0x42
-#define FSCPOS_REG_VOLT_BATT 0x48
-
-/* fans - the chip does not support minimum speed for fan2 */
-static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 };
-static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab };
-static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 };
-static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf };
-
-/* temperatures */
-static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 };
-static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
-
-/*
- * Functions declaration
- */
-static int fscpos_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int fscpos_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info);
-static int fscpos_remove(struct i2c_client *client);
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg);
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value);
-static struct fscpos_data *fscpos_update_device(struct device *dev);
-static void fscpos_init_client(struct i2c_client *client);
-
-static void reset_fan_alarm(struct i2c_client *client, int nr);
-
-/*
- * Driver data (common to all clients)
- */
-static const struct i2c_device_id fscpos_id[] = {
- { "fscpos", fscpos },
- { }
-};
-
-static struct i2c_driver fscpos_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "fscpos",
- },
- .probe = fscpos_probe,
- .remove = fscpos_remove,
- .id_table = fscpos_id,
- .detect = fscpos_detect,
- .address_data = &addr_data,
-};
-
-/*
- * Client data (each client gets its own)
- */
-struct fscpos_data {
- struct device *hwmon_dev;
- struct mutex update_lock;
- char valid; /* 0 until following fields are valid */
- unsigned long last_updated; /* In jiffies */
-
- /* register values */
- u8 revision; /* revision of chip */
- u8 global_event; /* global event status */
- u8 global_control; /* global control register */
- u8 wdog_control; /* watchdog control */
- u8 wdog_state; /* watchdog status */
- u8 wdog_preset; /* watchdog preset */
- u8 volt[3]; /* 12, 5, battery current */
- u8 temp_act[3]; /* temperature */
- u8 temp_status[3]; /* status of sensor */
- u8 fan_act[3]; /* fans revolutions per second */
- u8 fan_status[3]; /* fan status */
- u8 pwm[2]; /* fan min value for rps */
- u8 fan_ripple[3]; /* divider for rps */
-};
-
-/* Temperature */
-#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
-
-static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1]));
-}
-
-static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03);
-}
-
-static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "1\n");
-}
-
-static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
- if (v != 1) {
- dev_err(&client->dev, "temp_reset value %ld not supported. "
- "Use 1 to reset the alarm!\n", v);
- return -EINVAL;
- }
-
- dev_info(&client->dev, "You used the temp_reset feature which has not "
- "been proplerly tested. Please report your "
- "experience to the module author.\n");
-
- /* Supported value: 2 (clears the status) */
- fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2);
- return count;
-}
-
-/* Fans */
-#define RPM_FROM_REG(val) ((val) * 60)
-
-static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 0..1, 3..7 reserved => mask with 0x04 */
- return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04);
-}
-
-static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1]));
-}
-
-static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03);
-}
-
-static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int nr, int reg)
-{
- /* supported values: 2, 4, 8 */
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- switch (v) {
- case 2: v = 1; break;
- case 4: v = 2; break;
- case 8: v = 3; break;
- default:
- dev_err(&client->dev, "fan_ripple value %ld not supported. "
- "Must be one of 2, 4 or 8!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
- /* bits 2..7 reserved => mask with 0x03 */
- data->fan_ripple[nr - 1] &= ~0x03;
- data->fan_ripple[nr - 1] |= v;
-
- fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->pwm[nr - 1]);
-}
-
-static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- /* Range: 0..255 */
- if (v < 0) v = 0;
- if (v > 255) v = 255;
-
- mutex_lock(&data->update_lock);
- data->pwm[nr - 1] = v;
- fscpos_write_value(client, reg, data->pwm[nr - 1]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static void reset_fan_alarm(struct i2c_client *client, int nr)
-{
- fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4);
-}
-
-/* Volts */
-#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255)
-
-static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200));
-}
-
-static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600));
-}
-
-static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300));
-}
-
-/* Watchdog */
-static ssize_t show_wdog_control(struct fscpos_data *data, char *buf)
-{
- /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */
- return sprintf(buf, "%u\n", data->wdog_control & 0xb0);
-}
-
-static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- /* bits 0..3 reserved => mask with 0xf0 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
-
- mutex_lock(&data->update_lock);
- data->wdog_control &= ~0xf0;
- data->wdog_control |= v;
- fscpos_write_value(client, reg, data->wdog_control);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_wdog_state(struct fscpos_data *data, char *buf)
-{
- /* bits 0, 2..7 reserved => mask with 0x02 */
- return sprintf(buf, "%u\n", data->wdog_state & 0x02);
-}
-
-static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
- /* Valid values: 2 (clear) */
- if (v != 2) {
- dev_err(&client->dev, "wdog_state value %ld not supported. "
- "Must be 2 to clear the state!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
- data->wdog_state &= ~v;
- fscpos_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf)
-{
- return sprintf(buf, "%u\n", data->wdog_preset);
-}
-
-static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
-
- mutex_lock(&data->update_lock);
- data->wdog_preset = v;
- fscpos_write_value(client, reg, data->wdog_preset);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-/* Event */
-static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf)
-{
- /* bits 5..7 reserved => mask with 0x1f */
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", data->global_event & 0x9b);
-}
-
-/*
- * Sysfs stuff
- */
-#define create_getter(kind, sub) \
- static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \
- { \
- struct fscpos_data *data = fscpos_update_device(dev); \
- return show_##kind##sub(data, buf); \
- }
-
-#define create_getter_n(kind, offset, sub) \
- static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\
- *buf) \
- { \
- struct fscpos_data *data = fscpos_update_device(dev); \
- return show_##kind##sub(data, buf, offset); \
- }
-
-#define create_setter(kind, sub, reg) \
- static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \
- *buf, size_t count) \
- { \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscpos_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, reg); \
- }
-
-#define create_setter_n(kind, offset, sub, reg) \
- static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
- { \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscpos_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, offset, reg);\
- }
-
-#define create_sysfs_device_ro(kind, sub, offset) \
- static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \
- sysfs_show_##kind##offset##sub, NULL);
-
-#define create_sysfs_device_rw(kind, sub, offset) \
- static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \
- sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub);
-
-#define sysfs_ro_n(kind, sub, offset) \
- create_getter_n(kind, offset, sub); \
- create_sysfs_device_ro(kind, sub, offset);
-
-#define sysfs_rw_n(kind, sub, offset, reg) \
- create_getter_n(kind, offset, sub); \
- create_setter_n(kind, offset, sub, reg); \
- create_sysfs_device_rw(kind, sub, offset);
-
-#define sysfs_rw(kind, sub, reg) \
- create_getter(kind, sub); \
- create_setter(kind, sub, reg); \
- create_sysfs_device_rw(kind, sub,);
-
-#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \
- sysfs_fan(offset, reg_status, reg_ripple); \
- sysfs_rw_n(pwm,, offset, reg_min);
-
-#define sysfs_fan(offset, reg_status, reg_ripple) \
- sysfs_ro_n(fan, _input, offset); \
- sysfs_ro_n(fan, _status, offset); \
- sysfs_rw_n(fan, _ripple, offset, reg_ripple);
-
-#define sysfs_temp(offset, reg_status) \
- sysfs_ro_n(temp, _input, offset); \
- sysfs_ro_n(temp, _status, offset); \
- sysfs_rw_n(temp, _reset, offset, reg_status);
-
-#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \
- sysfs_rw(wdog, _control, reg_wdog_control); \
- sysfs_rw(wdog, _preset, reg_wdog_preset); \
- sysfs_rw(wdog, _state, reg_wdog_state);
-
-sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0],
- FSCPOS_REG_PWM[0]);
-sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1],
- FSCPOS_REG_PWM[1]);
-sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]);
-
-sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]);
-sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]);
-sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]);
-
-sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE,
- FSCPOS_REG_WDOG_CONTROL);
-
-static DEVICE_ATTR(event, S_IRUGO, show_event, NULL);
-static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL);
-static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL);
-static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL);
-
-static struct attribute *fscpos_attributes[] = {
- &dev_attr_event.attr,
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
-
- &dev_attr_wdog_control.attr,
- &dev_attr_wdog_preset.attr,
- &dev_attr_wdog_state.attr,
-
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_status.attr,
- &dev_attr_temp1_reset.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp2_status.attr,
- &dev_attr_temp2_reset.attr,
- &dev_attr_temp3_input.attr,
- &dev_attr_temp3_status.attr,
- &dev_attr_temp3_reset.attr,
-
- &dev_attr_fan1_input.attr,
- &dev_attr_fan1_status.attr,
- &dev_attr_fan1_ripple.attr,
- &dev_attr_pwm1.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan2_status.attr,
- &dev_attr_fan2_ripple.attr,
- &dev_attr_pwm2.attr,
- &dev_attr_fan3_input.attr,
- &dev_attr_fan3_status.attr,
- &dev_attr_fan3_ripple.attr,
- NULL
-};
-
-static const struct attribute_group fscpos_group = {
- .attrs = fscpos_attributes,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int fscpos_detect(struct i2c_client *new_client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = new_client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- /* Do the remaining detection unless force or force_fscpos parameter */
- if (kind < 0) {
- if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0)
- != 0x50) /* 'P' */
- || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1)
- != 0x45) /* 'E' */
- || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
- != 0x47))/* 'G' */
- return -ENODEV;
- }
-
- strlcpy(info->type, "fscpos", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int fscpos_probe(struct i2c_client *new_client,
- const struct i2c_device_id *id)
-{
- struct fscpos_data *data;
- int err;
-
- data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(new_client, data);
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- /* Inizialize the fscpos chip */
- fscpos_init_client(new_client);
-
- /* Announce that the chip was found */
- dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
-
- /* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
- goto exit_free;
-
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
-exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &fscpos_group);
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static int fscpos_remove(struct i2c_client *client)
-{
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &fscpos_group);
-
- kfree(data);
- return 0;
-}
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg)
-{
- dev_dbg(&client->dev, "Read reg 0x%02x\n", reg);
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value);
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new FSCPOS chip */
-static void fscpos_init_client(struct i2c_client *client)
-{
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- /* read revision from chip */
- data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION);
-}
-
-static struct fscpos_data *fscpos_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
- int i;
-
- dev_dbg(&client->dev, "Starting fscpos update\n");
-
- for (i = 0; i < 3; i++) {
- data->temp_act[i] = fscpos_read_value(client,
- FSCPOS_REG_TEMP_ACT[i]);
- data->temp_status[i] = fscpos_read_value(client,
- FSCPOS_REG_TEMP_STATE[i]);
- data->fan_act[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_ACT[i]);
- data->fan_status[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_STATE[i]);
- data->fan_ripple[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_RIPPLE[i]);
- if (i < 2) {
- /* fan2_min is not supported by the chip */
- data->pwm[i] = fscpos_read_value(client,
- FSCPOS_REG_PWM[i]);
- }
- /* reset fan status if speed is back to > 0 */
- if (data->fan_status[i] != 0 && data->fan_act[i] > 0) {
- reset_fan_alarm(client, i);
- }
- }
-
- data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12);
- data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5);
- data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT);
-
- data->wdog_preset = fscpos_read_value(client,
- FSCPOS_REG_WDOG_PRESET);
- data->wdog_state = fscpos_read_value(client,
- FSCPOS_REG_WDOG_STATE);
- data->wdog_control = fscpos_read_value(client,
- FSCPOS_REG_WDOG_CONTROL);
-
- data->global_event = fscpos_read_value(client,
- FSCPOS_REG_EVENT_STATE);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
- mutex_unlock(&data->update_lock);
- return data;
-}
-
-static int __init sm_fscpos_init(void)
-{
- return i2c_add_driver(&fscpos_driver);
-}
-
-static void __exit sm_fscpos_exit(void)
-{
- i2c_del_driver(&fscpos_driver);
-}
-
-MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung "
- "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>"
- " and Philip Edelbrock <phil@netroedge.com>");
-MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver");
-MODULE_LICENSE("GPL");
-
-module_init(sm_fscpos_init);
-module_exit(sm_fscpos_exit);
mutex_init(&data->update_lock);
/* Initialize the LTC4215 chip */
- /* TODO */
+ i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00);
/* Register sysfs hooks */
ret = sysfs_create_group(&client->dev.kobj, <c4215_group);
mutex_init(&data->update_lock);
/* Initialize the LTC4245 chip */
- /* TODO */
+ i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00);
+ i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00);
/* Register sysfs hooks */
ret = sysfs_create_group(&client->dev.kobj, <c4245_group);
will be called i2c-pnx.
config I2C_PXA
- tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ARCH_PXA
+ tristate "Intel PXA2XX I2C adapter"
+ depends on ARCH_PXA || ARCH_MMP
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
goto err;
snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
- "SMBus CMI adapter %s (%s)",
- acpi_device_name(device),
- acpi_device_uid(device));
+ "SMBus CMI adapter %s",
+ acpi_device_name(device));
smbus_cmi->adapter.owner = THIS_MODULE;
smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
smbus_cmi->adapter.algo_data = smbus_cmi;
#include <asm/idle.h>
-#include "../dma/ioatdma_hw.h"
-#include "../dma/ioatdma_registers.h"
+#include "../dma/ioat/hw.h"
+#include "../dma/ioat/registers.h"
#define I7300_IDLE_DRIVER_VERSION "1.55"
#define I7300_PRINT "i7300_idle:"
udelay(10);
sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
- if (sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE)
+ if (sts != IOAT_CHANSTS_ACTIVE)
break;
}
udelay(1000);
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
- if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE) {
+ if (chan_sts != IOAT_CHANSTS_DONE) {
/* Not complete, reset the channel */
writeb(IOAT_CHANCMD_RESET,
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
- if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
+ if (chan_sts != IOAT_CHANSTS_ACTIVE) {
writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
break;
}
}
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
/*
* We tried to reset multiple times. If IO A/T channel is still active
* flag an error and return without cleanup. Memory leak is better
* than random corruption in that extreme error situation.
*/
- if (chan_sts == IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
+ if (chan_sts == IOAT_CHANSTS_ACTIVE) {
printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels."
" Not freeing resources\n");
return;
enum rmpp_state {
RMPP_STATE_ACTIVE,
RMPP_STATE_TIMEOUT,
- RMPP_STATE_COMPLETE
+ RMPP_STATE_COMPLETE,
+ RMPP_STATE_CANCELING
};
struct mad_rmpp_recv {
unsigned long flags;
spin_lock_irqsave(&agent->lock, flags);
+ list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
+ if (rmpp_recv->state != RMPP_STATE_COMPLETE)
+ ib_free_recv_mad(rmpp_recv->rmpp_wc);
+ rmpp_recv->state = RMPP_STATE_CANCELING;
+ }
+ spin_unlock_irqrestore(&agent->lock, flags);
+
list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
cancel_delayed_work(&rmpp_recv->timeout_work);
cancel_delayed_work(&rmpp_recv->cleanup_work);
}
- spin_unlock_irqrestore(&agent->lock, flags);
flush_workqueue(agent->qp_info->port_priv->wq);
list_for_each_entry_safe(rmpp_recv, temp_rmpp_recv,
&agent->rmpp_list, list) {
list_del(&rmpp_recv->list);
- if (rmpp_recv->state != RMPP_STATE_COMPLETE)
- ib_free_recv_mad(rmpp_recv->rmpp_wc);
destroy_rmpp_recv(rmpp_recv);
}
}
unsigned long flags;
spin_lock_irqsave(&rmpp_recv->agent->lock, flags);
+ if (rmpp_recv->state == RMPP_STATE_CANCELING) {
+ spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
+ return;
+ }
list_del(&rmpp_recv->list);
spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
destroy_rmpp_recv(rmpp_recv);
spin_unlock_irq(&catas_lock);
list_for_each_entry_safe(dev, tmpdev, &tlist, catas_err.list) {
+ struct pci_dev *pdev = dev->pdev;
ret = __mthca_restart_one(dev->pdev);
+ /* 'dev' now is not valid */
if (ret)
- mthca_err(dev, "Reset failed (%d)\n", ret);
- else
- mthca_dbg(dev, "Reset succeeded\n");
+ printk(KERN_ERR "mthca %s: Reset failed (%d)\n",
+ pci_name(pdev), ret);
+ else {
+ struct mthca_dev *d = pci_get_drvdata(pdev);
+ mthca_dbg(d, "Reset succeeded\n");
+ }
}
mutex_unlock(&mthca_device_mutex);
.ndo_set_mac_address = nes_netdev_set_mac_address,
.ndo_set_multicast_list = nes_netdev_set_multicast_list,
.ndo_change_mtu = nes_netdev_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_vlan_rx_register = nes_netdev_vlan_rx_register,
};
{
struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
carrier_on_task);
+ struct ib_port_attr attr;
/*
* Take rtnl_lock to avoid racing with ipoib_stop() and
* turning the carrier back on while a device is being
* removed.
*/
+ if (ib_query_port(priv->ca, priv->port, &attr) ||
+ attr.state != IB_PORT_ACTIVE) {
+ ipoib_dbg(priv, "Keeping carrier off until IB port is active\n");
+ return;
+ }
+
rtnl_lock();
netif_carrier_on(priv->dev);
rtnl_unlock();
*/
#include <linux/init.h>
+#include <linux/types.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/random.h>
* that there are no threads in the middle of input_open_device()
*/
mutex_lock(&dev->mutex);
- dev->going_away = 1;
+ dev->going_away = true;
mutex_unlock(&dev->mutex);
spin_lock_irq(&dev->event_lock);
return 0;
}
+#define INPUT_DO_TOGGLE(dev, type, bits, on) \
+ do { \
+ int i; \
+ if (!test_bit(EV_##type, dev->evbit)) \
+ break; \
+ for (i = 0; i < type##_MAX; i++) { \
+ if (!test_bit(i, dev->bits##bit) || \
+ !test_bit(i, dev->bits)) \
+ continue; \
+ dev->event(dev, EV_##type, i, on); \
+ } \
+ } while (0)
+
+static void input_dev_reset(struct input_dev *dev, bool activate)
+{
+ if (!dev->event)
+ return;
+
+ INPUT_DO_TOGGLE(dev, LED, led, activate);
+ INPUT_DO_TOGGLE(dev, SND, snd, activate);
+
+ if (activate && test_bit(EV_REP, dev->evbit)) {
+ dev->event(dev, EV_REP, REP_PERIOD, dev->rep[REP_PERIOD]);
+ dev->event(dev, EV_REP, REP_DELAY, dev->rep[REP_DELAY]);
+ }
+}
+
+#ifdef CONFIG_PM
+static int input_dev_suspend(struct device *dev)
+{
+ struct input_dev *input_dev = to_input_dev(dev);
+
+ mutex_lock(&input_dev->mutex);
+ input_dev_reset(input_dev, false);
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static int input_dev_resume(struct device *dev)
+{
+ struct input_dev *input_dev = to_input_dev(dev);
+
+ mutex_lock(&input_dev->mutex);
+ input_dev_reset(input_dev, true);
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static const struct dev_pm_ops input_dev_pm_ops = {
+ .suspend = input_dev_suspend,
+ .resume = input_dev_resume,
+ .poweroff = input_dev_suspend,
+ .restore = input_dev_resume,
+};
+#endif /* CONFIG_PM */
+
static struct device_type input_dev_type = {
.groups = input_dev_attr_groups,
.release = input_dev_release,
.uevent = input_dev_uevent,
+#ifdef CONFIG_PM
+ .pm = &input_dev_pm_ops,
+#endif
};
static char *input_devnode(struct device *dev, mode_t *mode)
To compile this driver as a module, choose M here: the
module will be called aaed2000_kbd.
+config KEYBOARD_ADP5588
+ tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
+ depends on I2C
+ help
+ Say Y here if you want to use a ADP5588 attached to your
+ system I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adp5588-keys.
+
config KEYBOARD_AMIGA
tristate "Amiga keyboard"
depends on AMIGA
right-hand column will be interpreted as the key shown in the
left-hand column.
+config QT2160
+ tristate "Atmel AT42QT2160 Touch Sensor Chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Atmel AT42QT2160 Touch
+ Sensor chip as a keyboard input.
+
+ This driver can also be built as a module. If so, the module
+ will be called qt2160.
+
config KEYBOARD_BFIN
tristate "Blackfin BF54x keypad support"
depends on (BF54x && !BF544)
To compile this driver as a module, choose M here: the
module will be called maple_keyb.
+config KEYBOARD_MAX7359
+ tristate "Maxim MAX7359 Key Switch Controller"
+ depends on I2C
+ help
+ If you say yes here you get support for the Maxim MAX7359 Key
+ Switch Controller chip. This providers microprocessors with
+ management of up to 64 key switches
+
+ To compile this driver as a module, choose M here: the
+ module will be called max7359_keypad.
+
config KEYBOARD_NEWTON
tristate "Newton keyboard"
select SERIO
To compile this driver as a module, choose M here: the
module will be called newtonkbd.
+config KEYBOARD_OPENCORES
+ tristate "OpenCores Keyboard Controller"
+ help
+ Say Y here if you want to use the OpenCores Keyboard Controller
+ http://www.opencores.org/project,keyboardcontroller
+
+ To compile this driver as a module, choose M here; the
+ module will be called opencores-kbd.
+
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
depends on PXA27x || PXA3xx
# Each configuration option enables a list of files.
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
+obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
+obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
+obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
--- /dev/null
+/*
+ * File: drivers/input/keyboard/adp5588_keys.c
+ * Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+
+#include <linux/i2c/adp5588.h>
+
+ /* Configuration Register1 */
+#define AUTO_INC (1 << 7)
+#define GPIEM_CFG (1 << 6)
+#define OVR_FLOW_M (1 << 5)
+#define INT_CFG (1 << 4)
+#define OVR_FLOW_IEN (1 << 3)
+#define K_LCK_IM (1 << 2)
+#define GPI_IEN (1 << 1)
+#define KE_IEN (1 << 0)
+
+/* Interrupt Status Register */
+#define CMP2_INT (1 << 5)
+#define CMP1_INT (1 << 4)
+#define OVR_FLOW_INT (1 << 3)
+#define K_LCK_INT (1 << 2)
+#define GPI_INT (1 << 1)
+#define KE_INT (1 << 0)
+
+/* Key Lock and Event Counter Register */
+#define K_LCK_EN (1 << 6)
+#define LCK21 0x30
+#define KEC 0xF
+
+/* Key Event Register xy */
+#define KEY_EV_PRESSED (1 << 7)
+#define KEY_EV_MASK (0x7F)
+
+#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */
+
+#define KEYP_MAX_EVENT 10
+
+/*
+ * Early pre 4.0 Silicon required to delay readout by at least 25ms,
+ * since the Event Counter Register updated 25ms after the interrupt
+ * asserted.
+ */
+#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
+
+struct adp5588_kpad {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct delayed_work work;
+ unsigned long delay;
+ unsigned short keycode[ADP5588_KEYMAPSIZE];
+};
+
+static int adp5588_read(struct i2c_client *client, u8 reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Read Error\n");
+
+ return ret;
+}
+
+static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static void adp5588_work(struct work_struct *work)
+{
+ struct adp5588_kpad *kpad = container_of(work,
+ struct adp5588_kpad, work.work);
+ struct i2c_client *client = kpad->client;
+ int i, key, status, ev_cnt;
+
+ status = adp5588_read(client, INT_STAT);
+
+ if (status & OVR_FLOW_INT) /* Unlikely and should never happen */
+ dev_err(&client->dev, "Event Overflow Error\n");
+
+ if (status & KE_INT) {
+ ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
+ if (ev_cnt) {
+ for (i = 0; i < ev_cnt; i++) {
+ key = adp5588_read(client, Key_EVENTA + i);
+ input_report_key(kpad->input,
+ kpad->keycode[(key & KEY_EV_MASK) - 1],
+ key & KEY_EV_PRESSED);
+ }
+ input_sync(kpad->input);
+ }
+ }
+ adp5588_write(client, INT_STAT, status); /* Status is W1C */
+}
+
+static irqreturn_t adp5588_irq(int irq, void *handle)
+{
+ struct adp5588_kpad *kpad = handle;
+
+ /*
+ * use keventd context to read the event fifo registers
+ * Schedule readout at least 25ms after notification for
+ * REVID < 4
+ */
+
+ schedule_delayed_work(&kpad->work, kpad->delay);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit adp5588_setup(struct i2c_client *client)
+{
+ struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+ int i, ret;
+
+ ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
+ ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
+ ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
+
+ if (pdata->en_keylock) {
+ ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
+ ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
+ ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
+ }
+
+ for (i = 0; i < KEYP_MAX_EVENT; i++)
+ ret |= adp5588_read(client, Key_EVENTA);
+
+ ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
+ OVR_FLOW_INT | K_LCK_INT |
+ GPI_INT | KE_INT); /* Status is W1C */
+
+ ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "Write Error\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit adp5588_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adp5588_kpad *kpad;
+ struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+ struct input_dev *input;
+ unsigned int revid;
+ int ret, i;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ if (!pdata->rows || !pdata->cols || !pdata->keymap) {
+ dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
+ return -EINVAL;
+ }
+
+ if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
+ dev_err(&client->dev, "invalid keymapsize\n");
+ return -EINVAL;
+ }
+
+ if (!client->irq) {
+ dev_err(&client->dev, "no IRQ?\n");
+ return -EINVAL;
+ }
+
+ kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!kpad || !input) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ kpad->client = client;
+ kpad->input = input;
+ INIT_DELAYED_WORK(&kpad->work, adp5588_work);
+
+ ret = adp5588_read(client, DEV_ID);
+ if (ret < 0) {
+ error = ret;
+ goto err_free_mem;
+ }
+
+ revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
+ if (WA_DELAYED_READOUT_REVID(revid))
+ kpad->delay = msecs_to_jiffies(30);
+
+ input->name = client->name;
+ input->phys = "adp5588-keys/input0";
+ input->dev.parent = &client->dev;
+
+ input_set_drvdata(input, kpad);
+
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = revid;
+
+ input->keycodesize = sizeof(kpad->keycode[0]);
+ input->keycodemax = pdata->keymapsize;
+ input->keycode = kpad->keycode;
+
+ memcpy(kpad->keycode, pdata->keymap,
+ pdata->keymapsize * input->keycodesize);
+
+ /* setup input device */
+ __set_bit(EV_KEY, input->evbit);
+
+ if (pdata->repeat)
+ __set_bit(EV_REP, input->evbit);
+
+ for (i = 0; i < input->keycodemax; i++)
+ __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&client->dev, "unable to register input device\n");
+ goto err_free_mem;
+ }
+
+ error = request_irq(client->irq, adp5588_irq,
+ IRQF_TRIGGER_FALLING | IRQF_DISABLED,
+ client->dev.driver->name, kpad);
+ if (error) {
+ dev_err(&client->dev, "irq %d busy?\n", client->irq);
+ goto err_unreg_dev;
+ }
+
+ error = adp5588_setup(client);
+ if (error)
+ goto err_free_irq;
+
+ device_init_wakeup(&client->dev, 1);
+ i2c_set_clientdata(client, kpad);
+
+ dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
+ return 0;
+
+ err_free_irq:
+ free_irq(client->irq, kpad);
+ err_unreg_dev:
+ input_unregister_device(input);
+ input = NULL;
+ err_free_mem:
+ input_free_device(input);
+ kfree(kpad);
+
+ return error;
+}
+
+static int __devexit adp5588_remove(struct i2c_client *client)
+{
+ struct adp5588_kpad *kpad = i2c_get_clientdata(client);
+
+ adp5588_write(client, CFG, 0);
+ free_irq(client->irq, kpad);
+ cancel_delayed_work_sync(&kpad->work);
+ input_unregister_device(kpad->input);
+ i2c_set_clientdata(client, NULL);
+ kfree(kpad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5588_suspend(struct device *dev)
+{
+ struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+ struct i2c_client *client = kpad->client;
+
+ disable_irq(client->irq);
+ cancel_delayed_work_sync(&kpad->work);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int adp5588_resume(struct device *dev)
+{
+ struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+ struct i2c_client *client = kpad->client;
+
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static struct dev_pm_ops adp5588_dev_pm_ops = {
+ .suspend = adp5588_suspend,
+ .resume = adp5588_resume,
+};
+#endif
+
+static const struct i2c_device_id adp5588_id[] = {
+ { KBUILD_MODNAME, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp5588_id);
+
+static struct i2c_driver adp5588_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+#ifdef CONFIG_PM
+ .pm = &adp5588_dev_pm_ops,
+#endif
+ },
+ .probe = adp5588_probe,
+ .remove = __devexit_p(adp5588_remove),
+ .id_table = adp5588_id,
+};
+
+static int __init adp5588_init(void)
+{
+ return i2c_add_driver(&adp5588_driver);
+}
+module_init(adp5588_init);
+
+static void __exit adp5588_exit(void)
+{
+ i2c_del_driver(&adp5588_driver);
+}
+module_exit(adp5588_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5588 Keypad driver");
+MODULE_ALIAS("platform:adp5588-keys");
static int atkbd_activate(struct atkbd *atkbd)
{
struct ps2dev *ps2dev = &atkbd->ps2dev;
- unsigned char param[1];
-
-/*
- * Set the LEDs to a defined state.
- */
-
- param[0] = 0;
- if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
- return -1;
-
-/*
- * Set autorepeat to fastest possible.
- */
-
- param[0] = 0;
- if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
- return -1;
/*
* Enable the keyboard to receive keystrokes.
return -1;
atkbd_activate(atkbd);
-
-/*
- * Restore repeat rate and LEDs (that were reset by atkbd_activate)
- * to pre-resume state
- */
- if (!atkbd->softrepeat)
- atkbd_set_repeat_rate(atkbd);
- atkbd_set_leds(atkbd);
}
atkbd_enable(atkbd);
--- /dev/null
+/*
+ * max7359_keypad.c - MAX7359 Key Switch Controller Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * Based on pxa27x_keypad.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#define MAX7359_MAX_KEY_ROWS 8
+#define MAX7359_MAX_KEY_COLS 8
+#define MAX7359_MAX_KEY_NUM (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS)
+#define MAX7359_ROW_SHIFT 3
+
+/*
+ * MAX7359 registers
+ */
+#define MAX7359_REG_KEYFIFO 0x00
+#define MAX7359_REG_CONFIG 0x01
+#define MAX7359_REG_DEBOUNCE 0x02
+#define MAX7359_REG_INTERRUPT 0x03
+#define MAX7359_REG_PORTS 0x04
+#define MAX7359_REG_KEYREP 0x05
+#define MAX7359_REG_SLEEP 0x06
+
+/*
+ * Configuration register bits
+ */
+#define MAX7359_CFG_SLEEP (1 << 7)
+#define MAX7359_CFG_INTERRUPT (1 << 5)
+#define MAX7359_CFG_KEY_RELEASE (1 << 3)
+#define MAX7359_CFG_WAKEUP (1 << 1)
+#define MAX7359_CFG_TIMEOUT (1 << 0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7359_AUTOSLEEP_8192 0x01
+#define MAX7359_AUTOSLEEP_4096 0x02
+#define MAX7359_AUTOSLEEP_2048 0x03
+#define MAX7359_AUTOSLEEP_1024 0x04
+#define MAX7359_AUTOSLEEP_512 0x05
+#define MAX7359_AUTOSLEEP_256 0x06
+
+struct max7359_keypad {
+ /* matrix key code map */
+ unsigned short keycodes[MAX7359_MAX_KEY_NUM];
+
+ struct input_dev *input_dev;
+ struct i2c_client *client;
+};
+
+static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+ __func__, reg, val, ret);
+ return ret;
+}
+
+static int max7359_read_reg(struct i2c_client *client, int reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
+ __func__, reg, ret);
+ return ret;
+}
+
+static void max7359_build_keycode(struct max7359_keypad *keypad,
+ const struct matrix_keymap_data *keymap_data)
+{
+ struct input_dev *input_dev = keypad->input_dev;
+ int i;
+
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ unsigned int key = keymap_data->keymap[i];
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned int scancode = MATRIX_SCAN_CODE(row, col,
+ MAX7359_ROW_SHIFT);
+ unsigned short keycode = KEY_VAL(key);
+
+ keypad->keycodes[scancode] = keycode;
+ __set_bit(keycode, input_dev->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+}
+
+/* runs in an IRQ thread -- can (and will!) sleep */
+static irqreturn_t max7359_interrupt(int irq, void *dev_id)
+{
+ struct max7359_keypad *keypad = dev_id;
+ struct input_dev *input_dev = keypad->input_dev;
+ int val, row, col, release, code;
+
+ val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO);
+ row = val & 0x7;
+ col = (val >> 3) & 0x7;
+ release = val & 0x40;
+
+ code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT);
+
+ dev_dbg(&keypad->client->dev,
+ "key[%d:%d] %s\n", row, col, release ? "release" : "press");
+
+ input_event(input_dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(input_dev, keypad->keycodes[code], !release);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Let MAX7359 fall into a deep sleep:
+ * If no keys are pressed, enter sleep mode for 8192 ms. And if any
+ * key is pressed, the MAX7359 returns to normal operating mode.
+ */
+static inline void max7359_fall_deepsleep(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192);
+}
+
+/*
+ * Let MAX7359 take a catnap:
+ * Autosleep just for 256 ms.
+ */
+static inline void max7359_take_catnap(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256);
+}
+
+static int max7359_open(struct input_dev *dev)
+{
+ struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+ max7359_take_catnap(keypad->client);
+
+ return 0;
+}
+
+static void max7359_close(struct input_dev *dev)
+{
+ struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+ max7359_fall_deepsleep(keypad->client);
+}
+
+static void max7359_initialize(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_CONFIG,
+ MAX7359_CFG_INTERRUPT | /* Irq clears after host read */
+ MAX7359_CFG_KEY_RELEASE | /* Key release enable */
+ MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
+
+ /* Full key-scan functionality */
+ max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F);
+
+ /* nINT asserts every debounce cycles */
+ max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01);
+
+ max7359_fall_deepsleep(client);
+}
+
+static int __devinit max7359_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct matrix_keymap_data *keymap_data = client->dev.platform_data;
+ struct max7359_keypad *keypad;
+ struct input_dev *input_dev;
+ int ret;
+ int error;
+
+ if (!client->irq) {
+ dev_err(&client->dev, "The irq number should not be zero\n");
+ return -EINVAL;
+ }
+
+ /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */
+ ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to detect device\n");
+ return -ENODEV;
+ }
+
+ dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret);
+
+ keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!keypad || !input_dev) {
+ dev_err(&client->dev, "failed to allocate memory\n");
+ error = -ENOMEM;
+ goto failed_free_mem;
+ }
+
+ keypad->client = client;
+ keypad->input_dev = input_dev;
+
+ input_dev->name = client->name;
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = max7359_open;
+ input_dev->close = max7359_close;
+ input_dev->dev.parent = &client->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+ input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+ input_dev->keycode = keypad->keycodes;
+
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, keypad);
+
+ max7359_build_keycode(keypad, keymap_data);
+
+ error = request_threaded_irq(client->irq, NULL, max7359_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, keypad);
+ if (error) {
+ dev_err(&client->dev, "failed to register interrupt\n");
+ goto failed_free_mem;
+ }
+
+ /* Register the input device */
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&client->dev, "failed to register input device\n");
+ goto failed_free_irq;
+ }
+
+ /* Initialize MAX7359 */
+ max7359_initialize(client);
+
+ i2c_set_clientdata(client, keypad);
+ device_init_wakeup(&client->dev, 1);
+
+ return 0;
+
+failed_free_irq:
+ free_irq(client->irq, keypad);
+failed_free_mem:
+ input_free_device(input_dev);
+ kfree(keypad);
+ return error;
+}
+
+static int __devexit max7359_remove(struct i2c_client *client)
+{
+ struct max7359_keypad *keypad = i2c_get_clientdata(client);
+
+ free_irq(client->irq, keypad);
+ input_unregister_device(keypad->input_dev);
+ i2c_set_clientdata(client, NULL);
+ kfree(keypad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int max7359_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ max7359_fall_deepsleep(client);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int max7359_resume(struct i2c_client *client)
+{
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ /* Restore the default setting */
+ max7359_take_catnap(client);
+
+ return 0;
+}
+#else
+#define max7359_suspend NULL
+#define max7359_resume NULL
+#endif
+
+static const struct i2c_device_id max7359_ids[] = {
+ { "max7359", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max7359_ids);
+
+static struct i2c_driver max7359_i2c_driver = {
+ .driver = {
+ .name = "max7359",
+ },
+ .probe = max7359_probe,
+ .remove = __devexit_p(max7359_remove),
+ .suspend = max7359_suspend,
+ .resume = max7359_resume,
+ .id_table = max7359_ids,
+};
+
+static int __init max7359_init(void)
+{
+ return i2c_add_driver(&max7359_i2c_driver);
+}
+module_init(max7359_init);
+
+static void __exit max7359_exit(void)
+{
+ i2c_del_driver(&max7359_i2c_driver);
+}
+module_exit(max7359_exit);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * OpenCores Keyboard Controller Driver
+ * http://www.opencores.org/project,keyboardcontroller
+ *
+ * Copyright 2007-2009 HV Sistemas S.L.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+struct opencores_kbd {
+ struct input_dev *input;
+ struct resource *addr_res;
+ void __iomem *addr;
+ int irq;
+ unsigned short keycodes[128];
+};
+
+static irqreturn_t opencores_kbd_isr(int irq, void *dev_id)
+{
+ struct opencores_kbd *opencores_kbd = dev_id;
+ struct input_dev *input = opencores_kbd->input;
+ unsigned char c;
+
+ c = readb(opencores_kbd->addr);
+ input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1);
+ input_sync(input);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit opencores_kbd_probe(struct platform_device *pdev)
+{
+ struct input_dev *input;
+ struct opencores_kbd *opencores_kbd;
+ struct resource *res;
+ int irq, i, error;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "missing board memory resource\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "missing board IRQ resource\n");
+ return -EINVAL;
+ }
+
+ opencores_kbd = kzalloc(sizeof(*opencores_kbd), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!opencores_kbd || !input) {
+ dev_err(&pdev->dev, "failed to allocate device structures\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ opencores_kbd->addr_res = res;
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto err_free_mem;
+ }
+
+ opencores_kbd->addr = ioremap(res->start, resource_size(res));
+ if (!opencores_kbd->addr) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENXIO;
+ goto err_rel_mem;
+ }
+
+ opencores_kbd->input = input;
+ opencores_kbd->irq = irq;
+
+ input->name = pdev->name;
+ input->phys = "opencores-kbd/input0";
+ input->dev.parent = &pdev->dev;
+
+ input_set_drvdata(input, opencores_kbd);
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ input->keycode = opencores_kbd->keycodes;
+ input->keycodesize = sizeof(opencores_kbd->keycodes[0]);
+ input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes);
+
+ __set_bit(EV_KEY, input->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) {
+ /*
+ * OpenCores controller happens to have scancodes match
+ * our KEY_* definitions.
+ */
+ opencores_kbd->keycodes[i] = i;
+ __set_bit(opencores_kbd->keycodes[i], input->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ error = request_irq(irq, &opencores_kbd_isr,
+ IRQF_TRIGGER_RISING, pdev->name, opencores_kbd);
+ if (error) {
+ dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
+ goto err_unmap_mem;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev, "unable to register input device\n");
+ goto err_free_irq;
+ }
+
+ platform_set_drvdata(pdev, opencores_kbd);
+
+ return 0;
+
+ err_free_irq:
+ free_irq(irq, opencores_kbd);
+ err_unmap_mem:
+ iounmap(opencores_kbd->addr);
+ err_rel_mem:
+ release_mem_region(res->start, resource_size(res));
+ err_free_mem:
+ input_free_device(input);
+ kfree(opencores_kbd);
+
+ return error;
+}
+
+static int __devexit opencores_kbd_remove(struct platform_device *pdev)
+{
+ struct opencores_kbd *opencores_kbd = platform_get_drvdata(pdev);
+
+ free_irq(opencores_kbd->irq, opencores_kbd);
+
+ iounmap(opencores_kbd->addr);
+ release_mem_region(opencores_kbd->addr_res->start,
+ resource_size(opencores_kbd->addr_res));
+ input_unregister_device(opencores_kbd->input);
+ kfree(opencores_kbd);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver opencores_kbd_device_driver = {
+ .probe = opencores_kbd_probe,
+ .remove = __devexit_p(opencores_kbd_remove),
+ .driver = {
+ .name = "opencores-kbd",
+ },
+};
+
+static int __init opencores_kbd_init(void)
+{
+ return platform_driver_register(&opencores_kbd_device_driver);
+}
+module_init(opencores_kbd_init);
+
+static void __exit opencores_kbd_exit(void)
+{
+ platform_driver_unregister(&opencores_kbd_device_driver);
+}
+module_exit(opencores_kbd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>");
+MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller");
--- /dev/null
+/*
+ * qt2160.c - Atmel AT42QT2160 Touch Sense Controller
+ *
+ * Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+
+#define QT2160_VALID_CHIPID 0x11
+
+#define QT2160_CMD_CHIPID 0
+#define QT2160_CMD_CODEVER 1
+#define QT2160_CMD_GSTAT 2
+#define QT2160_CMD_KEYS3 3
+#define QT2160_CMD_KEYS4 4
+#define QT2160_CMD_SLIDE 5
+#define QT2160_CMD_GPIOS 6
+#define QT2160_CMD_SUBVER 7
+#define QT2160_CMD_CALIBRATE 10
+
+#define QT2160_CYCLE_INTERVAL (2*HZ)
+
+static unsigned char qt2160_key2code[] = {
+ KEY_0, KEY_1, KEY_2, KEY_3,
+ KEY_4, KEY_5, KEY_6, KEY_7,
+ KEY_8, KEY_9, KEY_A, KEY_B,
+ KEY_C, KEY_D, KEY_E, KEY_F,
+};
+
+struct qt2160_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct delayed_work dwork;
+ spinlock_t lock; /* Protects canceling/rescheduling of dwork */
+ unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
+ u16 key_matrix;
+};
+
+static int qt2160_read_block(struct i2c_client *client,
+ u8 inireg, u8 *buffer, unsigned int count)
+{
+ int error, idx = 0;
+
+ /*
+ * Can't use SMBus block data read. Check for I2C functionality to speed
+ * things up whenever possible. Otherwise we will be forced to read
+ * sequentially.
+ */
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+
+ error = i2c_smbus_write_byte(client, inireg + idx);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", error);
+ return error;
+ }
+
+ error = i2c_master_recv(client, buffer, count);
+ if (error != count) {
+ dev_err(&client->dev,
+ "couldn't read registers. Returned %d bytes\n", error);
+ return error;
+ }
+ } else {
+
+ while (count--) {
+ int data;
+
+ error = i2c_smbus_write_byte(client, inireg + idx);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", error);
+ return error;
+ }
+
+ data = i2c_smbus_read_byte(client);
+ if (data < 0) {
+ dev_err(&client->dev,
+ "couldn't read register. Returned %d\n", data);
+ return data;
+ }
+
+ buffer[idx++] = data;
+ }
+ }
+
+ return 0;
+}
+
+static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
+{
+ struct i2c_client *client = qt2160->client;
+ struct input_dev *input = qt2160->input;
+ u8 regs[6];
+ u16 old_matrix, new_matrix;
+ int ret, i, mask;
+
+ dev_dbg(&client->dev, "requesting keys...\n");
+
+ /*
+ * Read all registers from General Status Register
+ * to GPIOs register
+ */
+ ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6);
+ if (ret) {
+ dev_err(&client->dev,
+ "could not perform chip read.\n");
+ return ret;
+ }
+
+ old_matrix = qt2160->key_matrix;
+ qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1];
+
+ mask = 0x01;
+ for (i = 0; i < 16; ++i, mask <<= 1) {
+ int keyval = new_matrix & mask;
+
+ if ((old_matrix & mask) != keyval) {
+ input_report_key(input, qt2160->keycodes[i], keyval);
+ dev_dbg(&client->dev, "key %d %s\n",
+ i, keyval ? "pressed" : "released");
+ }
+ }
+
+ input_sync(input);
+
+ return 0;
+}
+
+static irqreturn_t qt2160_irq(int irq, void *_qt2160)
+{
+ struct qt2160_data *qt2160 = _qt2160;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qt2160->lock, flags);
+
+ __cancel_delayed_work(&qt2160->dwork);
+ schedule_delayed_work(&qt2160->dwork, 0);
+
+ spin_unlock_irqrestore(&qt2160->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void qt2160_schedule_read(struct qt2160_data *qt2160)
+{
+ spin_lock_irq(&qt2160->lock);
+ schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
+ spin_unlock_irq(&qt2160->lock);
+}
+
+static void qt2160_worker(struct work_struct *work)
+{
+ struct qt2160_data *qt2160 =
+ container_of(work, struct qt2160_data, dwork.work);
+
+ dev_dbg(&qt2160->client->dev, "worker\n");
+
+ qt2160_get_key_matrix(qt2160);
+
+ /* Avoid device lock up by checking every so often */
+ qt2160_schedule_read(qt2160);
+}
+
+static int __devinit qt2160_read(struct i2c_client *client, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte(client, reg);
+ if (ret) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", ret);
+ return ret;
+ }
+
+ ret = i2c_smbus_read_byte(client);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "couldn't read register. Returned %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int __devinit qt2160_write(struct i2c_client *client, u8 reg, u8 data)
+{
+ int error;
+
+ error = i2c_smbus_write_byte(client, reg);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", error);
+ return error;
+ }
+
+ error = i2c_smbus_write_byte(client, data);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't write data. Returned %d\n", error);
+ return error;
+ }
+
+ return error;
+}
+
+
+static bool __devinit qt2160_identify(struct i2c_client *client)
+{
+ int id, ver, rev;
+
+ /* Read Chid ID to check if chip is valid */
+ id = qt2160_read(client, QT2160_CMD_CHIPID);
+ if (id != QT2160_VALID_CHIPID) {
+ dev_err(&client->dev, "ID %d not supported\n", id);
+ return false;
+ }
+
+ /* Read chip firmware version */
+ ver = qt2160_read(client, QT2160_CMD_CODEVER);
+ if (ver < 0) {
+ dev_err(&client->dev, "could not get firmware version\n");
+ return false;
+ }
+
+ /* Read chip firmware revision */
+ rev = qt2160_read(client, QT2160_CMD_SUBVER);
+ if (rev < 0) {
+ dev_err(&client->dev, "could not get firmware revision\n");
+ return false;
+ }
+
+ dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n",
+ ver >> 4, ver & 0xf, rev);
+
+ return true;
+}
+
+static int __devinit qt2160_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct qt2160_data *qt2160;
+ struct input_dev *input;
+ int i;
+ int error;
+
+ /* Check functionality */
+ error = i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE);
+ if (!error) {
+ dev_err(&client->dev, "%s adapter not supported\n",
+ dev_driver_string(&client->adapter->dev));
+ return -ENODEV;
+ }
+
+ if (!qt2160_identify(client))
+ return -ENODEV;
+
+ /* Chip is valid and active. Allocate structure */
+ qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!qt2160 || !input) {
+ dev_err(&client->dev, "insufficient memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ qt2160->client = client;
+ qt2160->input = input;
+ INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
+ spin_lock_init(&qt2160->lock);
+
+ input->name = "AT42QT2160 Touch Sense Keyboard";
+ input->id.bustype = BUS_I2C;
+
+ input->keycode = qt2160->keycodes;
+ input->keycodesize = sizeof(qt2160->keycodes[0]);
+ input->keycodemax = ARRAY_SIZE(qt2160_key2code);
+
+ __set_bit(EV_KEY, input->evbit);
+ __clear_bit(EV_REP, input->evbit);
+ for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
+ qt2160->keycodes[i] = qt2160_key2code[i];
+ __set_bit(qt2160_key2code[i], input->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ /* Calibrate device */
+ error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
+ if (error) {
+ dev_err(&client->dev, "failed to calibrate device\n");
+ goto err_free_mem;
+ }
+
+ if (client->irq) {
+ error = request_irq(client->irq, qt2160_irq,
+ IRQF_TRIGGER_FALLING, "qt2160", qt2160);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to allocate irq %d\n", client->irq);
+ goto err_free_mem;
+ }
+ }
+
+ error = input_register_device(qt2160->input);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to register input device\n");
+ goto err_free_irq;
+ }
+
+ i2c_set_clientdata(client, qt2160);
+ qt2160_schedule_read(qt2160);
+
+ return 0;
+
+err_free_irq:
+ if (client->irq)
+ free_irq(client->irq, qt2160);
+err_free_mem:
+ input_free_device(input);
+ kfree(qt2160);
+ return error;
+}
+
+static int __devexit qt2160_remove(struct i2c_client *client)
+{
+ struct qt2160_data *qt2160 = i2c_get_clientdata(client);
+
+ /* Release IRQ so no queue will be scheduled */
+ if (client->irq)
+ free_irq(client->irq, qt2160);
+
+ cancel_delayed_work_sync(&qt2160->dwork);
+
+ input_unregister_device(qt2160->input);
+ kfree(qt2160);
+
+ i2c_set_clientdata(client, NULL);
+ return 0;
+}
+
+static struct i2c_device_id qt2160_idtable[] = {
+ { "qt2160", 0, },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, qt2160_idtable);
+
+static struct i2c_driver qt2160_driver = {
+ .driver = {
+ .name = "qt2160",
+ .owner = THIS_MODULE,
+ },
+
+ .id_table = qt2160_idtable,
+ .probe = qt2160_probe,
+ .remove = __devexit_p(qt2160_remove),
+};
+
+static int __init qt2160_init(void)
+{
+ return i2c_add_driver(&qt2160_driver);
+}
+module_init(qt2160_init);
+
+static void __exit qt2160_cleanup(void)
+{
+ i2c_del_driver(&qt2160_driver);
+}
+module_exit(qt2160_cleanup);
+
+MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>");
+MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor");
+MODULE_LICENSE("GPL");
config INPUT_WINBOND_CIR
tristate "Winbond IR remote control"
depends on X86 && PNP
+ select NEW_LEDS
select LEDS_CLASS
select BITREVERSE
help
{ 0x3169, KEY_PAUSE, },
};
-/* runs in an IRQ thread -- can (and will!) sleep */
+/*
+ * Because we communicate with the MSP430 using I2C, and all I2C calls
+ * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is
+ * active low, but we go through the GPIO controller so we can trigger
+ * on falling edges and not worry about enabling/disabling the IRQ in
+ * the keypress handling path.
+ */
static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
{
struct dm355evm_keys *keys = _keys;
return IRQ_HANDLED;
}
-/*
- * Because we communicate with the MSP430 using I2C, and all I2C calls
- * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is
- * active low, but we go through the GPIO controller so we can trigger
- * on falling edges and not worry about enabling/disabling the IRQ in
- * the keypress handling path.
- */
-static irqreturn_t dm355evm_keys_hardirq(int irq, void *_keys)
-{
- return IRQ_WAKE_THREAD;
-}
-
static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode)
{
u16 old_keycode;
/* REVISIT: flush the event queue? */
- status = request_threaded_irq(keys->irq,
- dm355evm_keys_hardirq, dm355evm_keys_irq,
- IRQF_TRIGGER_FALLING,
- dev_name(&pdev->dev), keys);
+ status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
+ IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
if (status < 0)
goto fail1;
*/
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
- mutex_lock(&ps2dev->cmd_mutex);
+
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n",
unsigned char v;
int rc = -1;
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n",
reg_addr, reg_val, rc);
return rc;
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
- mutex_lock(&ps2dev->cmd_mutex);
+
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n",
unsigned char v;
int rc = -1;
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n",
reg_val, rc);
return rc;
* and the irq configuration should be set to Falling Edge Trigger
*/
/* Control IRQ / Polling option */
-static int polling_req;
+static bool polling_req;
module_param(polling_req, bool, 0444);
MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");
struct i2c_client *client;
struct input_dev *input;
struct delayed_work dwork;
+ spinlock_t lock;
int no_data_count;
int no_decel_param;
int reduce_report_param;
return xy_delta || gesture;
}
-static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch,
+ unsigned long delay)
{
- struct synaptics_i2c *touch = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&touch->lock, flags);
/*
- * We want to have the work run immediately but it might have
- * already been scheduled with a delay, that's why we have to
- * cancel it first.
+ * If work is already scheduled then subsequent schedules will not
+ * change the scheduled time that's why we have to cancel it first.
*/
- cancel_delayed_work(&touch->dwork);
- schedule_delayed_work(&touch->dwork, 0);
+ __cancel_delayed_work(&touch->dwork);
+ schedule_delayed_work(&touch->dwork, delay);
+
+ spin_unlock_irqrestore(&touch->lock, flags);
+}
+
+static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+{
+ struct synaptics_i2c *touch = dev_id;
+
+ synaptics_i2c_reschedule_work(touch, 0);
return IRQ_HANDLED;
}
* We poll the device once in THREAD_IRQ_SLEEP_SECS and
* if error is detected, we try to reset and reconfigure the touchpad.
*/
- schedule_delayed_work(&touch->dwork, delay);
+ synaptics_i2c_reschedule_work(touch, delay);
}
static int synaptics_i2c_open(struct input_dev *input)
return ret;
if (polling_req)
- schedule_delayed_work(&touch->dwork,
- msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+ synaptics_i2c_reschedule_work(touch,
+ msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
return 0;
}
touch->scan_rate_param = scan_rate;
set_scan_rate(touch, scan_rate);
INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
+ spin_lock_init(&touch->lock);
return touch;
}
if (!touch)
return -ENOMEM;
- i2c_set_clientdata(client, touch);
-
ret = synaptics_i2c_reset_config(client);
if (ret)
goto err_mem_free;
if (client->irq < 1)
- polling_req = 1;
+ polling_req = true;
touch->input = input_allocate_device();
if (!touch->input) {
dev_warn(&touch->client->dev,
"IRQ request failed: %d, "
"falling back to polling\n", ret);
- polling_req = 1;
+ polling_req = true;
synaptics_i2c_reg_set(touch->client,
INTERRUPT_EN_REG, 0);
}
"Input device register failed: %d\n", ret);
goto err_input_free;
}
+
+ i2c_set_clientdata(client, touch);
+
return 0;
err_input_free:
input_free_device(touch->input);
err_mem_free:
- i2c_set_clientdata(client, NULL);
kfree(touch);
return ret;
struct synaptics_i2c *touch = i2c_get_clientdata(client);
if (!polling_req)
- free_irq(touch->client->irq, touch);
+ free_irq(client->irq, touch);
input_unregister_device(touch->input);
i2c_set_clientdata(client, NULL);
if (ret)
return ret;
- schedule_delayed_work(&touch->dwork,
- msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+ synaptics_i2c_reschedule_work(touch,
+ msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
return 0;
}
#include "i8042.h"
+/*
+ * i8042_lock protects serialization between i8042_command and
+ * the interrupt handler.
+ */
static DEFINE_SPINLOCK(i8042_lock);
+/*
+ * Writers to AUX and KBD ports as well as users issuing i8042_command
+ * directly should acquire i8042_mutex (by means of calling
+ * i8042_lock_chip() and i8042_unlock_ship() helpers) to ensure that
+ * they do not disturb each other (unfortunately in many i8042
+ * implementations write to one of the ports will immediately abort
+ * command that is being processed by another port).
+ */
+static DEFINE_MUTEX(i8042_mutex);
+
struct i8042_port {
struct serio *serio;
int irq;
static irqreturn_t i8042_interrupt(int irq, void *dev_id);
+void i8042_lock_chip(void)
+{
+ mutex_lock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_lock_chip);
+
+void i8042_unlock_chip(void)
+{
+ mutex_unlock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_unlock_chip);
+
/*
* The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
* be ready for reading values from it / writing values to it.
}
}
+/*
+ * Checks whether port belongs to i8042 controller.
+ */
+bool i8042_check_port_owner(const struct serio *port)
+{
+ int i;
+
+ for (i = 0; i < I8042_NUM_PORTS; i++)
+ if (i8042_ports[i].serio == port)
+ return true;
+
+ return false;
+}
+EXPORT_SYMBOL(i8042_check_port_owner);
+
static void i8042_free_irqs(void)
{
if (i8042_aux_irq_registered)
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/serio.h>
+#include <linux/i8042.h>
#include <linux/init.h>
#include <linux/libps2.h>
}
EXPORT_SYMBOL(ps2_sendbyte);
+void ps2_begin_command(struct ps2dev *ps2dev)
+{
+ mutex_lock(&ps2dev->cmd_mutex);
+
+ if (i8042_check_port_owner(ps2dev->serio))
+ i8042_lock_chip();
+}
+EXPORT_SYMBOL(ps2_begin_command);
+
+void ps2_end_command(struct ps2dev *ps2dev)
+{
+ if (i8042_check_port_owner(ps2dev->serio))
+ i8042_unlock_chip();
+
+ mutex_unlock(&ps2dev->cmd_mutex);
+}
+EXPORT_SYMBOL(ps2_end_command);
+
/*
* ps2_drain() waits for device to transmit requested number of bytes
* and discards them.
maxbytes = sizeof(ps2dev->cmdbuf);
}
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
serio_pause_rx(ps2dev->serio);
ps2dev->flags = PS2_FLAG_CMD;
wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD),
msecs_to_jiffies(timeout));
- mutex_unlock(&ps2dev->cmd_mutex);
+
+ ps2_end_command(ps2dev);
}
EXPORT_SYMBOL(ps2_drain);
{
int rc;
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
rc = __ps2_command(ps2dev, param, command);
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
return rc;
}
select TOUCHSCREEN_AD7879
help
Say Y here if you have a touchscreen interface using the
- AD7879-1 controller, and your board-specific initialization
- code includes that in its table of I2C devices.
+ AD7879-1/AD7889-1 controller, and your board-specific
+ initialization code includes that in its table of I2C devices.
If unsure, say N (but it's safe to say "Y").
select TOUCHSCREEN_AD7879
help
Say Y here if you have a touchscreen interface using the
- AD7879 controller, and your board-specific initialization
+ AD7879/AD7889 controller, and your board-specific initialization
code includes that in its table of SPI devices.
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called wacom_w8001.
+config TOUCHSCREEN_MCS5000
+ tristate "MELFAS MCS-5000 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have the MELFAS MCS-5000 touchscreen controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mcs5000_ts.
config TOUCHSCREEN_MTOUCH
tristate "MicroTouch serial touchscreens"
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
+obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
/*
- * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc.
*
- * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface)
+ * Description: AD7879/AD7889 based touchscreen, and GPIO driver
+ * (I2C/SPI Interface)
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
static const struct i2c_device_id ad7879_id[] = {
{ "ad7879", 0 },
+ { "ad7889", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ad7879_id);
--- /dev/null
+/*
+ * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Based on wm97xx-core.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs5000_ts.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+
+/* Registers */
+#define MCS5000_TS_STATUS 0x00
+#define STATUS_OFFSET 0
+#define STATUS_NO (0 << STATUS_OFFSET)
+#define STATUS_INIT (1 << STATUS_OFFSET)
+#define STATUS_SENSING (2 << STATUS_OFFSET)
+#define STATUS_COORD (3 << STATUS_OFFSET)
+#define STATUS_GESTURE (4 << STATUS_OFFSET)
+#define ERROR_OFFSET 4
+#define ERROR_NO (0 << ERROR_OFFSET)
+#define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET)
+#define ERROR_INT_RESET (2 << ERROR_OFFSET)
+#define ERROR_EXT_RESET (3 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET)
+
+#define MCS5000_TS_OP_MODE 0x01
+#define RESET_OFFSET 0
+#define RESET_NO (0 << RESET_OFFSET)
+#define RESET_EXT_SOFT (1 << RESET_OFFSET)
+#define OP_MODE_OFFSET 1
+#define OP_MODE_SLEEP (0 << OP_MODE_OFFSET)
+#define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET)
+#define GESTURE_OFFSET 4
+#define GESTURE_DISABLE (0 << GESTURE_OFFSET)
+#define GESTURE_ENABLE (1 << GESTURE_OFFSET)
+#define PROXIMITY_OFFSET 5
+#define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET)
+#define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET)
+#define SCAN_MODE_OFFSET 6
+#define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET)
+#define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET)
+#define REPORT_RATE_OFFSET 7
+#define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET)
+#define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET)
+
+#define MCS5000_TS_SENS_CTL 0x02
+#define MCS5000_TS_FILTER_CTL 0x03
+#define PRI_FILTER_OFFSET 0
+#define SEC_FILTER_OFFSET 4
+
+#define MCS5000_TS_X_SIZE_UPPER 0x08
+#define MCS5000_TS_X_SIZE_LOWER 0x09
+#define MCS5000_TS_Y_SIZE_UPPER 0x0A
+#define MCS5000_TS_Y_SIZE_LOWER 0x0B
+
+#define MCS5000_TS_INPUT_INFO 0x10
+#define INPUT_TYPE_OFFSET 0
+#define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET)
+#define GESTURE_CODE_OFFSET 3
+#define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET)
+
+#define MCS5000_TS_X_POS_UPPER 0x11
+#define MCS5000_TS_X_POS_LOWER 0x12
+#define MCS5000_TS_Y_POS_UPPER 0x13
+#define MCS5000_TS_Y_POS_LOWER 0x14
+#define MCS5000_TS_Z_POS 0x15
+#define MCS5000_TS_WIDTH 0x16
+#define MCS5000_TS_GESTURE_VAL 0x17
+#define MCS5000_TS_MODULE_REV 0x20
+#define MCS5000_TS_FIRMWARE_VER 0x21
+
+/* Touchscreen absolute values */
+#define MCS5000_MAX_XC 0x3ff
+#define MCS5000_MAX_YC 0x3ff
+
+enum mcs5000_ts_read_offset {
+ READ_INPUT_INFO,
+ READ_X_POS_UPPER,
+ READ_X_POS_LOWER,
+ READ_Y_POS_UPPER,
+ READ_Y_POS_LOWER,
+ READ_BLOCK_SIZE,
+};
+
+/* Each client has this additional data */
+struct mcs5000_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ const struct mcs5000_ts_platform_data *platform_data;
+};
+
+static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
+{
+ struct mcs5000_ts_data *data = dev_id;
+ struct i2c_client *client = data->client;
+ u8 buffer[READ_BLOCK_SIZE];
+ int err;
+ int x;
+ int y;
+
+ err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
+ READ_BLOCK_SIZE, buffer);
+ if (err < 0) {
+ dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
+ goto out;
+ }
+
+ switch (buffer[READ_INPUT_INFO]) {
+ case INPUT_TYPE_NONTOUCH:
+ input_report_key(data->input_dev, BTN_TOUCH, 0);
+ input_sync(data->input_dev);
+ break;
+
+ case INPUT_TYPE_SINGLE:
+ x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
+ y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
+
+ input_report_key(data->input_dev, BTN_TOUCH, 1);
+ input_report_abs(data->input_dev, ABS_X, x);
+ input_report_abs(data->input_dev, ABS_Y, y);
+ input_sync(data->input_dev);
+ break;
+
+ case INPUT_TYPE_DUAL:
+ /* TODO */
+ break;
+
+ case INPUT_TYPE_PALM:
+ /* TODO */
+ break;
+
+ case INPUT_TYPE_PROXIMITY:
+ /* TODO */
+ break;
+
+ default:
+ dev_err(&client->dev, "Unknown ts input type %d\n",
+ buffer[READ_INPUT_INFO]);
+ break;
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
+{
+ const struct mcs5000_ts_platform_data *platform_data =
+ data->platform_data;
+ struct i2c_client *client = data->client;
+
+ /* Touch reset & sleep mode */
+ i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
+ RESET_EXT_SOFT | OP_MODE_SLEEP);
+
+ /* Touch size */
+ i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
+ platform_data->x_size >> 8);
+ i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
+ platform_data->x_size & 0xff);
+ i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
+ platform_data->y_size >> 8);
+ i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
+ platform_data->y_size & 0xff);
+
+ /* Touch active mode & 80 report rate */
+ i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
+ OP_MODE_ACTIVE | REPORT_RATE_80);
+}
+
+static int __devinit mcs5000_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mcs5000_ts_data *data;
+ struct input_dev *input_dev;
+ int ret;
+
+ if (!client->dev.platform_data)
+ return -EINVAL;
+
+ data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!data || !input_dev) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ data->client = client;
+ data->input_dev = input_dev;
+ data->platform_data = client->dev.platform_data;
+
+ input_dev->name = "MELPAS MCS-5000 Touchscreen";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &client->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
+
+ input_set_drvdata(input_dev, data);
+
+ if (data->platform_data->cfg_pin)
+ data->platform_data->cfg_pin();
+
+ ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ goto err_free_mem;
+ }
+
+ ret = input_register_device(data->input_dev);
+ if (ret < 0)
+ goto err_free_irq;
+
+ mcs5000_ts_phys_init(data);
+ i2c_set_clientdata(client, data);
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, data);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(data);
+ return ret;
+}
+
+static int __devexit mcs5000_ts_remove(struct i2c_client *client)
+{
+ struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+ free_irq(client->irq, data);
+ input_unregister_device(data->input_dev);
+ kfree(data);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ /* Touch sleep mode */
+ i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
+
+ return 0;
+}
+
+static int mcs5000_ts_resume(struct i2c_client *client)
+{
+ struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+ mcs5000_ts_phys_init(data);
+
+ return 0;
+}
+#else
+#define mcs5000_ts_suspend NULL
+#define mcs5000_ts_resume NULL
+#endif
+
+static const struct i2c_device_id mcs5000_ts_id[] = {
+ { "mcs5000_ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
+
+static struct i2c_driver mcs5000_ts_driver = {
+ .probe = mcs5000_ts_probe,
+ .remove = __devexit_p(mcs5000_ts_remove),
+ .suspend = mcs5000_ts_suspend,
+ .resume = mcs5000_ts_resume,
+ .driver = {
+ .name = "mcs5000_ts",
+ },
+ .id_table = mcs5000_ts_id,
+};
+
+static int __init mcs5000_ts_init(void)
+{
+ return i2c_add_driver(&mcs5000_ts_driver);
+}
+
+static void __exit mcs5000_ts_exit(void)
+{
+ i2c_del_driver(&mcs5000_ts_driver);
+}
+
+module_init(mcs5000_ts_init);
+module_exit(mcs5000_ts_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
+MODULE_LICENSE("GPL");
static void clevo_mail_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
+ i8042_lock_chip();
+
if (value == LED_OFF)
i8042_command(NULL, CLEVO_MAIL_LED_OFF);
else if (value <= LED_HALF)
else
i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
+ i8042_unlock_chip();
+
}
static int clevo_mail_led_blink(struct led_classdev *led_cdev,
{
int status = -EINVAL;
+ i8042_lock_chip();
+
if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
/* Special case: the leds subsystem requested us to
* chose one user friendly blinking of the LED, and
*delay_on, *delay_off);
}
+ i8042_unlock_chip();
+
return status;
}
select MD_RAID6_PQ
select ASYNC_MEMCPY
select ASYNC_XOR
+ select ASYNC_PQ
+ select ASYNC_RAID6_RECOV
---help---
A RAID-5 set of N drives with a capacity of C MB per drive provides
the capacity of C * (N - 1) MB, and protects against a failure
If unsure, say Y.
+config MULTICORE_RAID456
+ bool "RAID-4/RAID-5/RAID-6 Multicore processing (EXPERIMENTAL)"
+ depends on MD_RAID456
+ depends on SMP
+ depends on EXPERIMENTAL
+ ---help---
+ Enable the raid456 module to dispatch per-stripe raid operations to a
+ thread pool.
+
+ If unsure, say N.
+
config MD_RAID6_PQ
tristate
+config ASYNC_RAID6_TEST
+ tristate "Self test for hardware accelerated raid6 recovery"
+ depends on MD_RAID6_PQ
+ select ASYNC_RAID6_RECOV
+ ---help---
+ This is a one-shot self test that permutes through the
+ recovery of all the possible two disk failure scenarios for a
+ N-disk array. Recovery is performed with the asynchronous
+ raid6 recovery routines, and will optionally use an offload
+ engine if one is available.
+
+ If unsure, say N.
+
config MD_MULTIPATH
tristate "Multipath I/O support"
depends on BLK_DEV_MD
* allocated while we're using it
*/
static int bitmap_checkpage(struct bitmap *bitmap, unsigned long page, int create)
+__releases(bitmap->lock)
+__acquires(bitmap->lock)
{
unsigned char *mappage;
return 0;
bad_alignment:
- rcu_read_unlock();
return -EINVAL;
}
static bitmap_counter_t *bitmap_get_counter(struct bitmap *bitmap,
sector_t offset, int *blocks,
int create)
+__releases(bitmap->lock)
+__acquires(bitmap->lock)
{
/* If 'create', we might release the lock and reclaim it.
* The lock must have been taken with interrupts enabled.
linear_conf_t *conf;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
rcu_read_lock();
conf = rcu_dereference(mddev->private);
mddev->pers->quiesce(mddev, 0);
}
+int mddev_congested(mddev_t *mddev, int bits)
+{
+ return mddev->suspended;
+}
+EXPORT_SYMBOL(mddev_congested);
+
static inline mddev_t *mddev_get(mddev_t *mddev)
{
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync,
mddev,
- "%s_resync");
+ "resync");
if (!mddev->sync_thread) {
printk(KERN_ERR "%s: could not start resync"
" thread...\n",
static int get_array_info(mddev_t * mddev, void __user * arg)
{
mdu_array_info_t info;
- int nr,working,active,failed,spare;
+ int nr,working,insync,failed,spare;
mdk_rdev_t *rdev;
- nr=working=active=failed=spare=0;
+ nr=working=insync=failed=spare=0;
list_for_each_entry(rdev, &mddev->disks, same_set) {
nr++;
if (test_bit(Faulty, &rdev->flags))
else {
working++;
if (test_bit(In_sync, &rdev->flags))
- active++;
+ insync++;
else
spare++;
}
info.state = (1<<MD_SB_CLEAN);
if (mddev->bitmap && mddev->bitmap_offset)
info.state = (1<<MD_SB_BITMAP_PRESENT);
- info.active_disks = active;
+ info.active_disks = insync;
info.working_disks = working;
info.failed_disks = failed;
info.spare_disks = spare;
if (!list_empty(&mddev->disks)) {
mdk_rdev_t *rdev0 = list_entry(mddev->disks.next,
mdk_rdev_t, same_set);
- int err = super_types[mddev->major_version]
+ err = super_types[mddev->major_version]
.load_super(rdev, rdev0, mddev->minor_version);
if (err < 0) {
printk(KERN_WARNING
thread->run = run;
thread->mddev = mddev;
thread->timeout = MAX_SCHEDULE_TIMEOUT;
- thread->tsk = kthread_run(md_thread, thread, name, mdname(thread->mddev));
+ thread->tsk = kthread_run(md_thread, thread,
+ "%s_%s",
+ mdname(thread->mddev),
+ name ?: mddev->pers->name);
if (IS_ERR(thread->tsk)) {
kfree(thread);
return NULL;
}
mddev->sync_thread = md_register_thread(md_do_sync,
mddev,
- "%s_resync");
+ "resync");
if (!mddev->sync_thread) {
printk(KERN_ERR "%s: could not start resync"
" thread...\n",
extern void md_done_sync(mddev_t *mddev, int blocks, int ok);
extern void md_error(mddev_t *mddev, mdk_rdev_t *rdev);
+extern int mddev_congested(mddev_t *mddev, int bits);
extern void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
sector_t sector, int size, struct page *page);
extern void md_super_wait(mddev_t *mddev);
}
mp_bh = mempool_alloc(conf->pool, GFP_NOIO);
- memset(mp_bh, 0, sizeof(*mp_bh));
mp_bh->master_bio = bio;
mp_bh->mddev = mddev;
multipath_conf_t *conf = mddev->private;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
rcu_read_lock();
for (i = 0; i < mddev->raid_disks ; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev);
}
{
- mddev->thread = md_register_thread(multipathd, mddev, "%s_multipath");
+ mddev->thread = md_register_thread(multipathd, mddev, NULL);
if (!mddev->thread) {
printk(KERN_ERR "multipath: couldn't allocate thread"
" for %s\n", mdname(mddev));
mdk_rdev_t **devlist = conf->devlist;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
for (i = 0; i < mddev->raid_disks && !ret ; i++) {
struct request_queue *q = bdev_get_queue(devlist[i]->bdev);
static int create_strip_zones(mddev_t *mddev)
{
- int i, c, j, err;
+ int i, c, err;
sector_t curr_zone_end, sectors;
mdk_rdev_t *smallest, *rdev1, *rdev2, *rdev, **dev;
struct strip_zone *zone;
/* now do the other zones */
for (i = 1; i < conf->nr_strip_zones; i++)
{
+ int j;
+
zone = conf->strip_zone + i;
dev = conf->devlist + i * mddev->raid_disks;
c = 0;
for (j=0; j<cnt; j++) {
- char b[BDEVNAME_SIZE];
rdev = conf->devlist[j];
printk(KERN_INFO "raid0: checking %s ...",
bdevname(rdev->bdev, b));
conf_t *conf = mddev->private;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
rcu_read_lock();
for (i = 0; i < mddev->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid1_end_read_request;
- read_bio->bi_rw = READ | do_sync;
+ read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
read_bio->bi_private = r1_bio;
generic_make_request(read_bio);
mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | do_barriers | do_sync;
+ mbio->bi_rw = WRITE | (do_barriers << BIO_RW_BARRIER) |
+ (do_sync << BIO_RW_SYNCIO);
mbio->bi_private = r1_bio;
if (behind_pages) {
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
bio->bi_end_io = raid1_end_write_request;
- bio->bi_rw = WRITE | do_sync;
+ bio->bi_rw = WRITE |
+ (do_sync << BIO_RW_SYNCIO);
bio->bi_private = r1_bio;
r1_bio->bios[i] = bio;
generic_make_request(bio);
bio->bi_sector = r1_bio->sector + rdev->data_offset;
bio->bi_bdev = rdev->bdev;
bio->bi_end_io = raid1_end_read_request;
- bio->bi_rw = READ | do_sync;
+ bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
bio->bi_private = r1_bio;
unplug = 1;
generic_make_request(bio);
conf->last_used = j;
- mddev->thread = md_register_thread(raid1d, mddev, "%s_raid1");
+ mddev->thread = md_register_thread(raid1d, mddev, NULL);
if (!mddev->thread) {
printk(KERN_ERR
"raid1: couldn't allocate thread for %s\n",
conf_t *conf = mddev->private;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
rcu_read_lock();
for (i = 0; i < mddev->raid_disks && ret == 0; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid10_end_read_request;
- read_bio->bi_rw = READ | do_sync;
+ read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
read_bio->bi_private = r10_bio;
generic_make_request(read_bio);
conf->mirrors[d].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync;
+ mbio->bi_rw = WRITE | (do_sync << BIO_RW_SYNCIO);
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
+ rdev->data_offset;
bio->bi_bdev = rdev->bdev;
- bio->bi_rw = READ | do_sync;
+ bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
bio->bi_private = r10_bio;
bio->bi_end_io = raid10_end_read_request;
unplug = 1;
max_sync = RESYNC_PAGES << (PAGE_SHIFT-9);
if (!test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
/* recovery... the complicated one */
- int i, j, k;
+ int j, k;
r10_bio = NULL;
for (i=0 ; i<conf->raid_disks; i++)
}
- mddev->thread = md_register_thread(raid10d, mddev, "%s_raid10");
+ mddev->thread = md_register_thread(raid10d, mddev, NULL);
if (!mddev->thread) {
printk(KERN_ERR
"raid10: couldn't allocate thread for %s\n",
#include <linux/kthread.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
+#include <linux/async.h>
#include <linux/seq_file.h>
+#include <linux/cpu.h>
#include "md.h"
#include "raid5.h"
#include "bitmap.h"
struct page *bio_page;
int i;
int page_offset;
+ struct async_submit_ctl submit;
+ enum async_tx_flags flags = 0;
if (bio->bi_sector >= sector)
page_offset = (signed)(bio->bi_sector - sector) * 512;
else
page_offset = (signed)(sector - bio->bi_sector) * -512;
+
+ if (frombio)
+ flags |= ASYNC_TX_FENCE;
+ init_async_submit(&submit, flags, tx, NULL, NULL, NULL);
+
bio_for_each_segment(bvl, bio, i) {
int len = bio_iovec_idx(bio, i)->bv_len;
int clen;
bio_page = bio_iovec_idx(bio, i)->bv_page;
if (frombio)
tx = async_memcpy(page, bio_page, page_offset,
- b_offset, clen,
- ASYNC_TX_DEP_ACK,
- tx, NULL, NULL);
+ b_offset, clen, &submit);
else
tx = async_memcpy(bio_page, page, b_offset,
- page_offset, clen,
- ASYNC_TX_DEP_ACK,
- tx, NULL, NULL);
+ page_offset, clen, &submit);
}
+ /* chain the operations */
+ submit.depend_tx = tx;
+
if (clen < len) /* hit end of page */
break;
page_offset += len;
{
struct dma_async_tx_descriptor *tx = NULL;
raid5_conf_t *conf = sh->raid_conf;
+ struct async_submit_ctl submit;
int i;
pr_debug("%s: stripe %llu\n", __func__,
}
atomic_inc(&sh->count);
- async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
- ops_complete_biofill, sh);
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_biofill, sh, NULL);
+ async_trigger_callback(&submit);
}
-static void ops_complete_compute5(void *stripe_head_ref)
+static void mark_target_uptodate(struct stripe_head *sh, int target)
{
- struct stripe_head *sh = stripe_head_ref;
- int target = sh->ops.target;
- struct r5dev *tgt = &sh->dev[target];
+ struct r5dev *tgt;
- pr_debug("%s: stripe %llu\n", __func__,
- (unsigned long long)sh->sector);
+ if (target < 0)
+ return;
+ tgt = &sh->dev[target];
set_bit(R5_UPTODATE, &tgt->flags);
BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
clear_bit(R5_Wantcompute, &tgt->flags);
+}
+
+static void ops_complete_compute(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ /* mark the computed target(s) as uptodate */
+ mark_target_uptodate(sh, sh->ops.target);
+ mark_target_uptodate(sh, sh->ops.target2);
+
clear_bit(STRIPE_COMPUTE_RUN, &sh->state);
if (sh->check_state == check_state_compute_run)
sh->check_state = check_state_compute_result;
release_stripe(sh);
}
-static struct dma_async_tx_descriptor *ops_run_compute5(struct stripe_head *sh)
+/* return a pointer to the address conversion region of the scribble buffer */
+static addr_conv_t *to_addr_conv(struct stripe_head *sh,
+ struct raid5_percpu *percpu)
+{
+ return percpu->scribble + sizeof(struct page *) * (sh->disks + 2);
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_compute5(struct stripe_head *sh, struct raid5_percpu *percpu)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
+ struct page **xor_srcs = percpu->scribble;
int target = sh->ops.target;
struct r5dev *tgt = &sh->dev[target];
struct page *xor_dest = tgt->page;
int count = 0;
struct dma_async_tx_descriptor *tx;
+ struct async_submit_ctl submit;
int i;
pr_debug("%s: stripe %llu block: %d\n",
atomic_inc(&sh->count);
+ init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST, NULL,
+ ops_complete_compute, sh, to_addr_conv(sh, percpu));
if (unlikely(count == 1))
- tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
- 0, NULL, ops_complete_compute5, sh);
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE, &submit);
else
- tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- ASYNC_TX_XOR_ZERO_DST, NULL,
- ops_complete_compute5, sh);
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, &submit);
return tx;
}
+/* set_syndrome_sources - populate source buffers for gen_syndrome
+ * @srcs - (struct page *) array of size sh->disks
+ * @sh - stripe_head to parse
+ *
+ * Populates srcs in proper layout order for the stripe and returns the
+ * 'count' of sources to be used in a call to async_gen_syndrome. The P
+ * destination buffer is recorded in srcs[count] and the Q destination
+ * is recorded in srcs[count+1]].
+ */
+static int set_syndrome_sources(struct page **srcs, struct stripe_head *sh)
+{
+ int disks = sh->disks;
+ int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
+ int d0_idx = raid6_d0(sh);
+ int count;
+ int i;
+
+ for (i = 0; i < disks; i++)
+ srcs[i] = (void *)raid6_empty_zero_page;
+
+ count = 0;
+ i = d0_idx;
+ do {
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
+ srcs[slot] = sh->dev[i].page;
+ i = raid6_next_disk(i, disks);
+ } while (i != d0_idx);
+ BUG_ON(count != syndrome_disks);
+
+ return count;
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_compute6_1(struct stripe_head *sh, struct raid5_percpu *percpu)
+{
+ int disks = sh->disks;
+ struct page **blocks = percpu->scribble;
+ int target;
+ int qd_idx = sh->qd_idx;
+ struct dma_async_tx_descriptor *tx;
+ struct async_submit_ctl submit;
+ struct r5dev *tgt;
+ struct page *dest;
+ int i;
+ int count;
+
+ if (sh->ops.target < 0)
+ target = sh->ops.target2;
+ else if (sh->ops.target2 < 0)
+ target = sh->ops.target;
+ else
+ /* we should only have one valid target */
+ BUG();
+ BUG_ON(target < 0);
+ pr_debug("%s: stripe %llu block: %d\n",
+ __func__, (unsigned long long)sh->sector, target);
+
+ tgt = &sh->dev[target];
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+ dest = tgt->page;
+
+ atomic_inc(&sh->count);
+
+ if (target == qd_idx) {
+ count = set_syndrome_sources(blocks, sh);
+ blocks[count] = NULL; /* regenerating p is not necessary */
+ BUG_ON(blocks[count+1] != dest); /* q should already be set */
+ init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ tx = async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit);
+ } else {
+ /* Compute any data- or p-drive using XOR */
+ count = 0;
+ for (i = disks; i-- ; ) {
+ if (i == target || i == qd_idx)
+ continue;
+ blocks[count++] = sh->dev[i].page;
+ }
+
+ init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST,
+ NULL, ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ tx = async_xor(dest, blocks, 0, count, STRIPE_SIZE, &submit);
+ }
+
+ return tx;
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu)
+{
+ int i, count, disks = sh->disks;
+ int syndrome_disks = sh->ddf_layout ? disks : disks-2;
+ int d0_idx = raid6_d0(sh);
+ int faila = -1, failb = -1;
+ int target = sh->ops.target;
+ int target2 = sh->ops.target2;
+ struct r5dev *tgt = &sh->dev[target];
+ struct r5dev *tgt2 = &sh->dev[target2];
+ struct dma_async_tx_descriptor *tx;
+ struct page **blocks = percpu->scribble;
+ struct async_submit_ctl submit;
+
+ pr_debug("%s: stripe %llu block1: %d block2: %d\n",
+ __func__, (unsigned long long)sh->sector, target, target2);
+ BUG_ON(target < 0 || target2 < 0);
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt2->flags));
+
+ /* we need to open-code set_syndrome_sources to handle the
+ * slot number conversion for 'faila' and 'failb'
+ */
+ for (i = 0; i < disks ; i++)
+ blocks[i] = (void *)raid6_empty_zero_page;
+ count = 0;
+ i = d0_idx;
+ do {
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
+ blocks[slot] = sh->dev[i].page;
+
+ if (i == target)
+ faila = slot;
+ if (i == target2)
+ failb = slot;
+ i = raid6_next_disk(i, disks);
+ } while (i != d0_idx);
+ BUG_ON(count != syndrome_disks);
+
+ BUG_ON(faila == failb);
+ if (failb < faila)
+ swap(faila, failb);
+ pr_debug("%s: stripe: %llu faila: %d failb: %d\n",
+ __func__, (unsigned long long)sh->sector, faila, failb);
+
+ atomic_inc(&sh->count);
+
+ if (failb == syndrome_disks+1) {
+ /* Q disk is one of the missing disks */
+ if (faila == syndrome_disks) {
+ /* Missing P+Q, just recompute */
+ init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ return async_gen_syndrome(blocks, 0, count+2,
+ STRIPE_SIZE, &submit);
+ } else {
+ struct page *dest;
+ int data_target;
+ int qd_idx = sh->qd_idx;
+
+ /* Missing D+Q: recompute D from P, then recompute Q */
+ if (target == qd_idx)
+ data_target = target2;
+ else
+ data_target = target;
+
+ count = 0;
+ for (i = disks; i-- ; ) {
+ if (i == data_target || i == qd_idx)
+ continue;
+ blocks[count++] = sh->dev[i].page;
+ }
+ dest = sh->dev[data_target].page;
+ init_async_submit(&submit,
+ ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST,
+ NULL, NULL, NULL,
+ to_addr_conv(sh, percpu));
+ tx = async_xor(dest, blocks, 0, count, STRIPE_SIZE,
+ &submit);
+
+ count = set_syndrome_sources(blocks, sh);
+ init_async_submit(&submit, ASYNC_TX_FENCE, tx,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ return async_gen_syndrome(blocks, 0, count+2,
+ STRIPE_SIZE, &submit);
+ }
+ } else {
+ init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ if (failb == syndrome_disks) {
+ /* We're missing D+P. */
+ return async_raid6_datap_recov(syndrome_disks+2,
+ STRIPE_SIZE, faila,
+ blocks, &submit);
+ } else {
+ /* We're missing D+D. */
+ return async_raid6_2data_recov(syndrome_disks+2,
+ STRIPE_SIZE, faila, failb,
+ blocks, &submit);
+ }
+ }
+}
+
+
static void ops_complete_prexor(void *stripe_head_ref)
{
struct stripe_head *sh = stripe_head_ref;
}
static struct dma_async_tx_descriptor *
-ops_run_prexor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+ops_run_prexor(struct stripe_head *sh, struct raid5_percpu *percpu,
+ struct dma_async_tx_descriptor *tx)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
+ struct page **xor_srcs = percpu->scribble;
int count = 0, pd_idx = sh->pd_idx, i;
+ struct async_submit_ctl submit;
/* existing parity data subtracted */
struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
xor_srcs[count++] = dev->page;
}
- tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- ASYNC_TX_DEP_ACK | ASYNC_TX_XOR_DROP_DST, tx,
- ops_complete_prexor, sh);
+ init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ ops_complete_prexor, sh, to_addr_conv(sh, percpu));
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, &submit);
return tx;
}
return tx;
}
-static void ops_complete_postxor(void *stripe_head_ref)
+static void ops_complete_reconstruct(void *stripe_head_ref)
{
struct stripe_head *sh = stripe_head_ref;
- int disks = sh->disks, i, pd_idx = sh->pd_idx;
+ int disks = sh->disks;
+ int pd_idx = sh->pd_idx;
+ int qd_idx = sh->qd_idx;
+ int i;
pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
- if (dev->written || i == pd_idx)
+
+ if (dev->written || i == pd_idx || i == qd_idx)
set_bit(R5_UPTODATE, &dev->flags);
}
}
static void
-ops_run_postxor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+ops_run_reconstruct5(struct stripe_head *sh, struct raid5_percpu *percpu,
+ struct dma_async_tx_descriptor *tx)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
-
+ struct page **xor_srcs = percpu->scribble;
+ struct async_submit_ctl submit;
int count = 0, pd_idx = sh->pd_idx, i;
struct page *xor_dest;
int prexor = 0;
* set ASYNC_TX_XOR_DROP_DST and ASYNC_TX_XOR_ZERO_DST
* for the synchronous xor case
*/
- flags = ASYNC_TX_DEP_ACK | ASYNC_TX_ACK |
+ flags = ASYNC_TX_ACK |
(prexor ? ASYNC_TX_XOR_DROP_DST : ASYNC_TX_XOR_ZERO_DST);
atomic_inc(&sh->count);
- if (unlikely(count == 1)) {
- flags &= ~(ASYNC_TX_XOR_DROP_DST | ASYNC_TX_XOR_ZERO_DST);
- tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
- flags, tx, ops_complete_postxor, sh);
- } else
- tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- flags, tx, ops_complete_postxor, sh);
+ init_async_submit(&submit, flags, tx, ops_complete_reconstruct, sh,
+ to_addr_conv(sh, percpu));
+ if (unlikely(count == 1))
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE, &submit);
+ else
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, &submit);
+}
+
+static void
+ops_run_reconstruct6(struct stripe_head *sh, struct raid5_percpu *percpu,
+ struct dma_async_tx_descriptor *tx)
+{
+ struct async_submit_ctl submit;
+ struct page **blocks = percpu->scribble;
+ int count;
+
+ pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector);
+
+ count = set_syndrome_sources(blocks, sh);
+
+ atomic_inc(&sh->count);
+
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_reconstruct,
+ sh, to_addr_conv(sh, percpu));
+ async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit);
}
static void ops_complete_check(void *stripe_head_ref)
release_stripe(sh);
}
-static void ops_run_check(struct stripe_head *sh)
+static void ops_run_check_p(struct stripe_head *sh, struct raid5_percpu *percpu)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
+ int pd_idx = sh->pd_idx;
+ int qd_idx = sh->qd_idx;
+ struct page *xor_dest;
+ struct page **xor_srcs = percpu->scribble;
struct dma_async_tx_descriptor *tx;
-
- int count = 0, pd_idx = sh->pd_idx, i;
- struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+ struct async_submit_ctl submit;
+ int count;
+ int i;
pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
+ count = 0;
+ xor_dest = sh->dev[pd_idx].page;
+ xor_srcs[count++] = xor_dest;
for (i = disks; i--; ) {
- struct r5dev *dev = &sh->dev[i];
- if (i != pd_idx)
- xor_srcs[count++] = dev->page;
+ if (i == pd_idx || i == qd_idx)
+ continue;
+ xor_srcs[count++] = sh->dev[i].page;
}
- tx = async_xor_zero_sum(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- &sh->ops.zero_sum_result, 0, NULL, NULL, NULL);
+ init_async_submit(&submit, 0, NULL, NULL, NULL,
+ to_addr_conv(sh, percpu));
+ tx = async_xor_val(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ &sh->ops.zero_sum_result, &submit);
+
+ atomic_inc(&sh->count);
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_check, sh, NULL);
+ tx = async_trigger_callback(&submit);
+}
+
+static void ops_run_check_pq(struct stripe_head *sh, struct raid5_percpu *percpu, int checkp)
+{
+ struct page **srcs = percpu->scribble;
+ struct async_submit_ctl submit;
+ int count;
+
+ pr_debug("%s: stripe %llu checkp: %d\n", __func__,
+ (unsigned long long)sh->sector, checkp);
+
+ count = set_syndrome_sources(srcs, sh);
+ if (!checkp)
+ srcs[count] = NULL;
atomic_inc(&sh->count);
- tx = async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
- ops_complete_check, sh);
+ init_async_submit(&submit, ASYNC_TX_ACK, NULL, ops_complete_check,
+ sh, to_addr_conv(sh, percpu));
+ async_syndrome_val(srcs, 0, count+2, STRIPE_SIZE,
+ &sh->ops.zero_sum_result, percpu->spare_page, &submit);
}
-static void raid5_run_ops(struct stripe_head *sh, unsigned long ops_request)
+static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
{
int overlap_clear = 0, i, disks = sh->disks;
struct dma_async_tx_descriptor *tx = NULL;
+ raid5_conf_t *conf = sh->raid_conf;
+ int level = conf->level;
+ struct raid5_percpu *percpu;
+ unsigned long cpu;
+ cpu = get_cpu();
+ percpu = per_cpu_ptr(conf->percpu, cpu);
if (test_bit(STRIPE_OP_BIOFILL, &ops_request)) {
ops_run_biofill(sh);
overlap_clear++;
}
if (test_bit(STRIPE_OP_COMPUTE_BLK, &ops_request)) {
- tx = ops_run_compute5(sh);
- /* terminate the chain if postxor is not set to be run */
- if (tx && !test_bit(STRIPE_OP_POSTXOR, &ops_request))
+ if (level < 6)
+ tx = ops_run_compute5(sh, percpu);
+ else {
+ if (sh->ops.target2 < 0 || sh->ops.target < 0)
+ tx = ops_run_compute6_1(sh, percpu);
+ else
+ tx = ops_run_compute6_2(sh, percpu);
+ }
+ /* terminate the chain if reconstruct is not set to be run */
+ if (tx && !test_bit(STRIPE_OP_RECONSTRUCT, &ops_request))
async_tx_ack(tx);
}
if (test_bit(STRIPE_OP_PREXOR, &ops_request))
- tx = ops_run_prexor(sh, tx);
+ tx = ops_run_prexor(sh, percpu, tx);
if (test_bit(STRIPE_OP_BIODRAIN, &ops_request)) {
tx = ops_run_biodrain(sh, tx);
overlap_clear++;
}
- if (test_bit(STRIPE_OP_POSTXOR, &ops_request))
- ops_run_postxor(sh, tx);
+ if (test_bit(STRIPE_OP_RECONSTRUCT, &ops_request)) {
+ if (level < 6)
+ ops_run_reconstruct5(sh, percpu, tx);
+ else
+ ops_run_reconstruct6(sh, percpu, tx);
+ }
- if (test_bit(STRIPE_OP_CHECK, &ops_request))
- ops_run_check(sh);
+ if (test_bit(STRIPE_OP_CHECK, &ops_request)) {
+ if (sh->check_state == check_state_run)
+ ops_run_check_p(sh, percpu);
+ else if (sh->check_state == check_state_run_q)
+ ops_run_check_pq(sh, percpu, 0);
+ else if (sh->check_state == check_state_run_pq)
+ ops_run_check_pq(sh, percpu, 1);
+ else
+ BUG();
+ }
if (overlap_clear)
for (i = disks; i--; ) {
if (test_and_clear_bit(R5_Overlap, &dev->flags))
wake_up(&sh->raid_conf->wait_for_overlap);
}
+ put_cpu();
}
static int grow_one_stripe(raid5_conf_t *conf)
return 0;
}
+/**
+ * scribble_len - return the required size of the scribble region
+ * @num - total number of disks in the array
+ *
+ * The size must be enough to contain:
+ * 1/ a struct page pointer for each device in the array +2
+ * 2/ room to convert each entry in (1) to its corresponding dma
+ * (dma_map_page()) or page (page_address()) address.
+ *
+ * Note: the +2 is for the destination buffers of the ddf/raid6 case where we
+ * calculate over all devices (not just the data blocks), using zeros in place
+ * of the P and Q blocks.
+ */
+static size_t scribble_len(int num)
+{
+ size_t len;
+
+ len = sizeof(struct page *) * (num+2) + sizeof(addr_conv_t) * (num+2);
+
+ return len;
+}
+
static int resize_stripes(raid5_conf_t *conf, int newsize)
{
/* Make all the stripes able to hold 'newsize' devices.
struct stripe_head *osh, *nsh;
LIST_HEAD(newstripes);
struct disk_info *ndisks;
+ unsigned long cpu;
int err;
struct kmem_cache *sc;
int i;
/* Step 3.
* At this point, we are holding all the stripes so the array
* is completely stalled, so now is a good time to resize
- * conf->disks.
+ * conf->disks and the scribble region
*/
ndisks = kzalloc(newsize * sizeof(struct disk_info), GFP_NOIO);
if (ndisks) {
} else
err = -ENOMEM;
+ get_online_cpus();
+ conf->scribble_len = scribble_len(newsize);
+ for_each_present_cpu(cpu) {
+ struct raid5_percpu *percpu;
+ void *scribble;
+
+ percpu = per_cpu_ptr(conf->percpu, cpu);
+ scribble = kmalloc(conf->scribble_len, GFP_NOIO);
+
+ if (scribble) {
+ kfree(percpu->scribble);
+ percpu->scribble = scribble;
+ } else {
+ err = -ENOMEM;
+ break;
+ }
+ }
+ put_online_cpus();
+
/* Step 4, return new stripes to service */
while(!list_empty(&newstripes)) {
nsh = list_entry(newstripes.next, struct stripe_head, lru);
list_del_init(&nsh->lru);
+
for (i=conf->raid_disks; i < newsize; i++)
if (nsh->dev[i].page == NULL) {
struct page *p = alloc_page(GFP_NOIO);
}
-
-/*
- * Copy data between a page in the stripe cache, and one or more bion
- * The page could align with the middle of the bio, or there could be
- * several bion, each with several bio_vecs, which cover part of the page
- * Multiple bion are linked together on bi_next. There may be extras
- * at the end of this list. We ignore them.
- */
-static void copy_data(int frombio, struct bio *bio,
- struct page *page,
- sector_t sector)
-{
- char *pa = page_address(page);
- struct bio_vec *bvl;
- int i;
- int page_offset;
-
- if (bio->bi_sector >= sector)
- page_offset = (signed)(bio->bi_sector - sector) * 512;
- else
- page_offset = (signed)(sector - bio->bi_sector) * -512;
- bio_for_each_segment(bvl, bio, i) {
- int len = bio_iovec_idx(bio,i)->bv_len;
- int clen;
- int b_offset = 0;
-
- if (page_offset < 0) {
- b_offset = -page_offset;
- page_offset += b_offset;
- len -= b_offset;
- }
-
- if (len > 0 && page_offset + len > STRIPE_SIZE)
- clen = STRIPE_SIZE - page_offset;
- else clen = len;
-
- if (clen > 0) {
- char *ba = __bio_kmap_atomic(bio, i, KM_USER0);
- if (frombio)
- memcpy(pa+page_offset, ba+b_offset, clen);
- else
- memcpy(ba+b_offset, pa+page_offset, clen);
- __bio_kunmap_atomic(ba, KM_USER0);
- }
- if (clen < len) /* hit end of page */
- break;
- page_offset += len;
- }
-}
-
-#define check_xor() do { \
- if (count == MAX_XOR_BLOCKS) { \
- xor_blocks(count, STRIPE_SIZE, dest, ptr);\
- count = 0; \
- } \
- } while(0)
-
-static void compute_parity6(struct stripe_head *sh, int method)
-{
- raid5_conf_t *conf = sh->raid_conf;
- int i, pd_idx, qd_idx, d0_idx, disks = sh->disks, count;
- int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
- struct bio *chosen;
- /**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[syndrome_disks+2];
-
- pd_idx = sh->pd_idx;
- qd_idx = sh->qd_idx;
- d0_idx = raid6_d0(sh);
-
- pr_debug("compute_parity, stripe %llu, method %d\n",
- (unsigned long long)sh->sector, method);
-
- switch(method) {
- case READ_MODIFY_WRITE:
- BUG(); /* READ_MODIFY_WRITE N/A for RAID-6 */
- case RECONSTRUCT_WRITE:
- for (i= disks; i-- ;)
- if ( i != pd_idx && i != qd_idx && sh->dev[i].towrite ) {
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- }
- break;
- case CHECK_PARITY:
- BUG(); /* Not implemented yet */
- }
-
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- sector_t sector = sh->dev[i].sector;
- struct bio *wbi = sh->dev[i].written;
- while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
- copy_data(1, wbi, sh->dev[i].page, sector);
- wbi = r5_next_bio(wbi, sector);
- }
-
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(R5_UPTODATE, &sh->dev[i].flags);
- }
-
- /* Note that unlike RAID-5, the ordering of the disks matters greatly.*/
-
- for (i = 0; i < disks; i++)
- ptrs[i] = (void *)raid6_empty_zero_page;
-
- count = 0;
- i = d0_idx;
- do {
- int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
-
- ptrs[slot] = page_address(sh->dev[i].page);
- if (slot < syndrome_disks &&
- !test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
- printk(KERN_ERR "block %d/%d not uptodate "
- "on parity calc\n", i, count);
- BUG();
- }
-
- i = raid6_next_disk(i, disks);
- } while (i != d0_idx);
- BUG_ON(count != syndrome_disks);
-
- raid6_call.gen_syndrome(syndrome_disks+2, STRIPE_SIZE, ptrs);
-
- switch(method) {
- case RECONSTRUCT_WRITE:
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_UPTODATE, &sh->dev[qd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[qd_idx].flags);
- break;
- case UPDATE_PARITY:
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_UPTODATE, &sh->dev[qd_idx].flags);
- break;
- }
-}
-
-
-/* Compute one missing block */
-static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
-{
- int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *dest, *p;
- int qd_idx = sh->qd_idx;
-
- pr_debug("compute_block_1, stripe %llu, idx %d\n",
- (unsigned long long)sh->sector, dd_idx);
-
- if ( dd_idx == qd_idx ) {
- /* We're actually computing the Q drive */
- compute_parity6(sh, UPDATE_PARITY);
- } else {
- dest = page_address(sh->dev[dd_idx].page);
- if (!nozero) memset(dest, 0, STRIPE_SIZE);
- count = 0;
- for (i = disks ; i--; ) {
- if (i == dd_idx || i == qd_idx)
- continue;
- p = page_address(sh->dev[i].page);
- if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
- ptr[count++] = p;
- else
- printk("compute_block() %d, stripe %llu, %d"
- " not present\n", dd_idx,
- (unsigned long long)sh->sector, i);
-
- check_xor();
- }
- if (count)
- xor_blocks(count, STRIPE_SIZE, dest, ptr);
- if (!nozero) set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
- else clear_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
- }
-}
-
-/* Compute two missing blocks */
-static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
-{
- int i, count, disks = sh->disks;
- int syndrome_disks = sh->ddf_layout ? disks : disks-2;
- int d0_idx = raid6_d0(sh);
- int faila = -1, failb = -1;
- /**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[syndrome_disks+2];
-
- for (i = 0; i < disks ; i++)
- ptrs[i] = (void *)raid6_empty_zero_page;
- count = 0;
- i = d0_idx;
- do {
- int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
-
- ptrs[slot] = page_address(sh->dev[i].page);
-
- if (i == dd_idx1)
- faila = slot;
- if (i == dd_idx2)
- failb = slot;
- i = raid6_next_disk(i, disks);
- } while (i != d0_idx);
- BUG_ON(count != syndrome_disks);
-
- BUG_ON(faila == failb);
- if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; }
-
- pr_debug("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n",
- (unsigned long long)sh->sector, dd_idx1, dd_idx2,
- faila, failb);
-
- if (failb == syndrome_disks+1) {
- /* Q disk is one of the missing disks */
- if (faila == syndrome_disks) {
- /* Missing P+Q, just recompute */
- compute_parity6(sh, UPDATE_PARITY);
- return;
- } else {
- /* We're missing D+Q; recompute D from P */
- compute_block_1(sh, ((dd_idx1 == sh->qd_idx) ?
- dd_idx2 : dd_idx1),
- 0);
- compute_parity6(sh, UPDATE_PARITY); /* Is this necessary? */
- return;
- }
- }
-
- /* We're missing D+P or D+D; */
- if (failb == syndrome_disks) {
- /* We're missing D+P. */
- raid6_datap_recov(syndrome_disks+2, STRIPE_SIZE, faila, ptrs);
- } else {
- /* We're missing D+D. */
- raid6_2data_recov(syndrome_disks+2, STRIPE_SIZE, faila, failb,
- ptrs);
- }
-
- /* Both the above update both missing blocks */
- set_bit(R5_UPTODATE, &sh->dev[dd_idx1].flags);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx2].flags);
-}
-
static void
-schedule_reconstruction5(struct stripe_head *sh, struct stripe_head_state *s,
+schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
int rcw, int expand)
{
int i, pd_idx = sh->pd_idx, disks = sh->disks;
+ raid5_conf_t *conf = sh->raid_conf;
+ int level = conf->level;
if (rcw) {
/* if we are not expanding this is a proper write request, and
} else
sh->reconstruct_state = reconstruct_state_run;
- set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
s->locked++;
}
}
- if (s->locked + 1 == disks)
+ if (s->locked + conf->max_degraded == disks)
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
- atomic_inc(&sh->raid_conf->pending_full_writes);
+ atomic_inc(&conf->pending_full_writes);
} else {
+ BUG_ON(level == 6);
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
sh->reconstruct_state = reconstruct_state_prexor_drain_run;
set_bit(STRIPE_OP_PREXOR, &s->ops_request);
set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
}
}
- /* keep the parity disk locked while asynchronous operations
+ /* keep the parity disk(s) locked while asynchronous operations
* are in flight
*/
set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
s->locked++;
+ if (level == 6) {
+ int qd_idx = sh->qd_idx;
+ struct r5dev *dev = &sh->dev[qd_idx];
+
+ set_bit(R5_LOCKED, &dev->flags);
+ clear_bit(R5_UPTODATE, &dev->flags);
+ s->locked++;
+ }
+
pr_debug("%s: stripe %llu locked: %d ops_request: %lx\n",
__func__, (unsigned long long)sh->sector,
s->locked, s->ops_request);
static void end_reshape(raid5_conf_t *conf);
-static int page_is_zero(struct page *p)
-{
- char *a = page_address(p);
- return ((*(u32*)a) == 0 &&
- memcmp(a, a+4, STRIPE_SIZE-4)==0);
-}
-
static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous,
struct stripe_head *sh)
{
set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
set_bit(R5_Wantcompute, &dev->flags);
sh->ops.target = disk_idx;
+ sh->ops.target2 = -1;
s->req_compute = 1;
/* Careful: from this point on 'uptodate' is in the eye
- * of raid5_run_ops which services 'compute' operations
+ * of raid_run_ops which services 'compute' operations
* before writes. R5_Wantcompute flags a block that will
* be R5_UPTODATE by the time it is needed for a
* subsequent operation.
set_bit(STRIPE_HANDLE, &sh->state);
}
-static void handle_stripe_fill6(struct stripe_head *sh,
- struct stripe_head_state *s, struct r6_state *r6s,
- int disks)
+/* fetch_block6 - checks the given member device to see if its data needs
+ * to be read or computed to satisfy a request.
+ *
+ * Returns 1 when no more member devices need to be checked, otherwise returns
+ * 0 to tell the loop in handle_stripe_fill6 to continue
+ */
+static int fetch_block6(struct stripe_head *sh, struct stripe_head_state *s,
+ struct r6_state *r6s, int disk_idx, int disks)
{
- int i;
- for (i = disks; i--; ) {
- struct r5dev *dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) &&
- !test_bit(R5_UPTODATE, &dev->flags) &&
- (dev->toread || (dev->towrite &&
- !test_bit(R5_OVERWRITE, &dev->flags)) ||
- s->syncing || s->expanding ||
- (s->failed >= 1 &&
- (sh->dev[r6s->failed_num[0]].toread ||
- s->to_write)) ||
- (s->failed >= 2 &&
- (sh->dev[r6s->failed_num[1]].toread ||
- s->to_write)))) {
- /* we would like to get this block, possibly
- * by computing it, but we might not be able to
+ struct r5dev *dev = &sh->dev[disk_idx];
+ struct r5dev *fdev[2] = { &sh->dev[r6s->failed_num[0]],
+ &sh->dev[r6s->failed_num[1]] };
+
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ (dev->toread ||
+ (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
+ s->syncing || s->expanding ||
+ (s->failed >= 1 &&
+ (fdev[0]->toread || s->to_write)) ||
+ (s->failed >= 2 &&
+ (fdev[1]->toread || s->to_write)))) {
+ /* we would like to get this block, possibly by computing it,
+ * otherwise read it if the backing disk is insync
+ */
+ BUG_ON(test_bit(R5_Wantcompute, &dev->flags));
+ BUG_ON(test_bit(R5_Wantread, &dev->flags));
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && (disk_idx == r6s->failed_num[0] ||
+ disk_idx == r6s->failed_num[1]))) {
+ /* have disk failed, and we're requested to fetch it;
+ * do compute it
*/
- if ((s->uptodate == disks - 1) &&
- (s->failed && (i == r6s->failed_num[0] ||
- i == r6s->failed_num[1]))) {
- pr_debug("Computing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- compute_block_1(sh, i, 0);
- s->uptodate++;
- } else if ( s->uptodate == disks-2 && s->failed >= 2 ) {
- /* Computing 2-failure is *very* expensive; only
- * do it if failed >= 2
- */
- int other;
- for (other = disks; other--; ) {
- if (other == i)
- continue;
- if (!test_bit(R5_UPTODATE,
- &sh->dev[other].flags))
- break;
- }
- BUG_ON(other < 0);
- pr_debug("Computing stripe %llu blocks %d,%d\n",
- (unsigned long long)sh->sector,
- i, other);
- compute_block_2(sh, i, other);
- s->uptodate += 2;
- } else if (test_bit(R5_Insync, &dev->flags)) {
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- s->locked++;
- pr_debug("Reading block %d (sync=%d)\n",
- i, s->syncing);
+ pr_debug("Computing stripe %llu block %d\n",
+ (unsigned long long)sh->sector, disk_idx);
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute, &dev->flags);
+ sh->ops.target = disk_idx;
+ sh->ops.target2 = -1; /* no 2nd target */
+ s->req_compute = 1;
+ s->uptodate++;
+ return 1;
+ } else if (s->uptodate == disks-2 && s->failed >= 2) {
+ /* Computing 2-failure is *very* expensive; only
+ * do it if failed >= 2
+ */
+ int other;
+ for (other = disks; other--; ) {
+ if (other == disk_idx)
+ continue;
+ if (!test_bit(R5_UPTODATE,
+ &sh->dev[other].flags))
+ break;
}
+ BUG_ON(other < 0);
+ pr_debug("Computing stripe %llu blocks %d,%d\n",
+ (unsigned long long)sh->sector,
+ disk_idx, other);
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute, &sh->dev[disk_idx].flags);
+ set_bit(R5_Wantcompute, &sh->dev[other].flags);
+ sh->ops.target = disk_idx;
+ sh->ops.target2 = other;
+ s->uptodate += 2;
+ s->req_compute = 1;
+ return 1;
+ } else if (test_bit(R5_Insync, &dev->flags)) {
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ pr_debug("Reading block %d (sync=%d)\n",
+ disk_idx, s->syncing);
}
}
+
+ return 0;
+}
+
+/**
+ * handle_stripe_fill6 - read or compute data to satisfy pending requests.
+ */
+static void handle_stripe_fill6(struct stripe_head *sh,
+ struct stripe_head_state *s, struct r6_state *r6s,
+ int disks)
+{
+ int i;
+
+ /* look for blocks to read/compute, skip this if a compute
+ * is already in flight, or if the stripe contents are in the
+ * midst of changing due to a write
+ */
+ if (!test_bit(STRIPE_COMPUTE_RUN, &sh->state) && !sh->check_state &&
+ !sh->reconstruct_state)
+ for (i = disks; i--; )
+ if (fetch_block6(sh, s, r6s, i, disks))
+ break;
set_bit(STRIPE_HANDLE, &sh->state);
}
*/
/* since handle_stripe can be called at any time we need to handle the
* case where a compute block operation has been submitted and then a
- * subsequent call wants to start a write request. raid5_run_ops only
- * handles the case where compute block and postxor are requested
+ * subsequent call wants to start a write request. raid_run_ops only
+ * handles the case where compute block and reconstruct are requested
* simultaneously. If this is not the case then new writes need to be
* held off until the compute completes.
*/
if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
(s->locked == 0 && (rcw == 0 || rmw == 0) &&
!test_bit(STRIPE_BIT_DELAY, &sh->state)))
- schedule_reconstruction5(sh, s, rcw == 0, 0);
+ schedule_reconstruction(sh, s, rcw == 0, 0);
}
static void handle_stripe_dirtying6(raid5_conf_t *conf,
struct stripe_head *sh, struct stripe_head_state *s,
- struct r6_state *r6s, int disks)
-{
- int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i;
- int qd_idx = sh->qd_idx;
- for (i = disks; i--; ) {
- struct r5dev *dev = &sh->dev[i];
- /* Would I have to read this buffer for reconstruct_write */
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && i != pd_idx && i != qd_idx
- && (!test_bit(R5_LOCKED, &dev->flags)
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)) rcw++;
- else {
- pr_debug("raid6: must_compute: "
- "disk %d flags=%#lx\n", i, dev->flags);
- must_compute++;
- }
- }
- }
- pr_debug("for sector %llu, rcw=%d, must_compute=%d\n",
- (unsigned long long)sh->sector, rcw, must_compute);
- set_bit(STRIPE_HANDLE, &sh->state);
-
- if (rcw > 0)
- /* want reconstruct write, but need to get some data */
- for (i = disks; i--; ) {
- struct r5dev *dev = &sh->dev[i];
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && !(s->failed == 0 && (i == pd_idx || i == qd_idx))
- && !test_bit(R5_LOCKED, &dev->flags) &&
- !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (
- test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- pr_debug("Read_old stripe %llu "
- "block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- s->locked++;
- } else {
- pr_debug("Request delayed stripe %llu "
- "block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
+ struct r6_state *r6s, int disks)
+{
+ int rcw = 0, pd_idx = sh->pd_idx, i;
+ int qd_idx = sh->qd_idx;
+
+ set_bit(STRIPE_HANDLE, &sh->state);
+ for (i = disks; i--; ) {
+ struct r5dev *dev = &sh->dev[i];
+ /* check if we haven't enough data */
+ if (!test_bit(R5_OVERWRITE, &dev->flags) &&
+ i != pd_idx && i != qd_idx &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ rcw++;
+ if (!test_bit(R5_Insync, &dev->flags))
+ continue; /* it's a failed drive */
+
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ } else {
+ pr_debug("Request delayed stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
}
}
+ }
/* now if nothing is locked, and if we have enough data, we can start a
* write request
*/
- if (s->locked == 0 && rcw == 0 &&
+ if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
+ s->locked == 0 && rcw == 0 &&
!test_bit(STRIPE_BIT_DELAY, &sh->state)) {
- if (must_compute > 0) {
- /* We have failed blocks and need to compute them */
- switch (s->failed) {
- case 0:
- BUG();
- case 1:
- compute_block_1(sh, r6s->failed_num[0], 0);
- break;
- case 2:
- compute_block_2(sh, r6s->failed_num[0],
- r6s->failed_num[1]);
- break;
- default: /* This request should have been failed? */
- BUG();
- }
- }
-
- pr_debug("Computing parity for stripe %llu\n",
- (unsigned long long)sh->sector);
- compute_parity6(sh, RECONSTRUCT_WRITE);
- /* now every locked buffer is ready to be written */
- for (i = disks; i--; )
- if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
- pr_debug("Writing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- s->locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- }
- if (s->locked == disks)
- if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
- atomic_inc(&conf->pending_full_writes);
- /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
- set_bit(STRIPE_INSYNC, &sh->state);
-
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- atomic_dec(&conf->preread_active_stripes);
- if (atomic_read(&conf->preread_active_stripes) <
- IO_THRESHOLD)
- md_wakeup_thread(conf->mddev->thread);
- }
+ schedule_reconstruction(sh, s, 1, 0);
}
}
* we are done. Otherwise update the mismatch count and repair
* parity if !MD_RECOVERY_CHECK
*/
- if (sh->ops.zero_sum_result == 0)
+ if ((sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) == 0)
/* parity is correct (on disc,
* not in buffer any more)
*/
set_bit(R5_Wantcompute,
&sh->dev[sh->pd_idx].flags);
sh->ops.target = sh->pd_idx;
+ sh->ops.target2 = -1;
s->uptodate++;
}
}
static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh,
- struct stripe_head_state *s,
- struct r6_state *r6s, struct page *tmp_page,
- int disks)
+ struct stripe_head_state *s,
+ struct r6_state *r6s, int disks)
{
- int update_p = 0, update_q = 0;
- struct r5dev *dev;
int pd_idx = sh->pd_idx;
int qd_idx = sh->qd_idx;
+ struct r5dev *dev;
set_bit(STRIPE_HANDLE, &sh->state);
BUG_ON(s->failed > 2);
- BUG_ON(s->uptodate < disks);
+
/* Want to check and possibly repair P and Q.
* However there could be one 'failed' device, in which
* case we can only check one of them, possibly using the
* other to generate missing data
*/
- /* If !tmp_page, we cannot do the calculations,
- * but as we have set STRIPE_HANDLE, we will soon be called
- * by stripe_handle with a tmp_page - just wait until then.
- */
- if (tmp_page) {
+ switch (sh->check_state) {
+ case check_state_idle:
+ /* start a new check operation if there are < 2 failures */
if (s->failed == r6s->q_failed) {
- /* The only possible failed device holds 'Q', so it
+ /* The only possible failed device holds Q, so it
* makes sense to check P (If anything else were failed,
* we would have used P to recreate it).
*/
- compute_block_1(sh, pd_idx, 1);
- if (!page_is_zero(sh->dev[pd_idx].page)) {
- compute_block_1(sh, pd_idx, 0);
- update_p = 1;
- }
+ sh->check_state = check_state_run;
}
if (!r6s->q_failed && s->failed < 2) {
- /* q is not failed, and we didn't use it to generate
+ /* Q is not failed, and we didn't use it to generate
* anything, so it makes sense to check it
*/
- memcpy(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE);
- compute_parity6(sh, UPDATE_PARITY);
- if (memcmp(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE) != 0) {
- clear_bit(STRIPE_INSYNC, &sh->state);
- update_q = 1;
- }
+ if (sh->check_state == check_state_run)
+ sh->check_state = check_state_run_pq;
+ else
+ sh->check_state = check_state_run_q;
}
- if (update_p || update_q) {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
- if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
- update_p = update_q = 0;
+
+ /* discard potentially stale zero_sum_result */
+ sh->ops.zero_sum_result = 0;
+
+ if (sh->check_state == check_state_run) {
+ /* async_xor_zero_sum destroys the contents of P */
+ clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
+ s->uptodate--;
+ }
+ if (sh->check_state >= check_state_run &&
+ sh->check_state <= check_state_run_pq) {
+ /* async_syndrome_zero_sum preserves P and Q, so
+ * no need to mark them !uptodate here
+ */
+ set_bit(STRIPE_OP_CHECK, &s->ops_request);
+ break;
}
+ /* we have 2-disk failure */
+ BUG_ON(s->failed != 2);
+ /* fall through */
+ case check_state_compute_result:
+ sh->check_state = check_state_idle;
+
+ /* check that a write has not made the stripe insync */
+ if (test_bit(STRIPE_INSYNC, &sh->state))
+ break;
+
/* now write out any block on a failed drive,
- * or P or Q if they need it
+ * or P or Q if they were recomputed
*/
-
+ BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */
if (s->failed == 2) {
dev = &sh->dev[r6s->failed_num[1]];
s->locked++;
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantwrite, &dev->flags);
}
-
- if (update_p) {
+ if (sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) {
dev = &sh->dev[pd_idx];
s->locked++;
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantwrite, &dev->flags);
}
- if (update_q) {
+ if (sh->ops.zero_sum_result & SUM_CHECK_Q_RESULT) {
dev = &sh->dev[qd_idx];
s->locked++;
set_bit(R5_LOCKED, &dev->flags);
clear_bit(STRIPE_DEGRADED, &sh->state);
set_bit(STRIPE_INSYNC, &sh->state);
+ break;
+ case check_state_run:
+ case check_state_run_q:
+ case check_state_run_pq:
+ break; /* we will be called again upon completion */
+ case check_state_check_result:
+ sh->check_state = check_state_idle;
+
+ /* handle a successful check operation, if parity is correct
+ * we are done. Otherwise update the mismatch count and repair
+ * parity if !MD_RECOVERY_CHECK
+ */
+ if (sh->ops.zero_sum_result == 0) {
+ /* both parities are correct */
+ if (!s->failed)
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ /* in contrast to the raid5 case we can validate
+ * parity, but still have a failure to write
+ * back
+ */
+ sh->check_state = check_state_compute_result;
+ /* Returning at this point means that we may go
+ * off and bring p and/or q uptodate again so
+ * we make sure to check zero_sum_result again
+ * to verify if p or q need writeback
+ */
+ }
+ } else {
+ conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ int *target = &sh->ops.target;
+
+ sh->ops.target = -1;
+ sh->ops.target2 = -1;
+ sh->check_state = check_state_compute_run;
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ if (sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) {
+ set_bit(R5_Wantcompute,
+ &sh->dev[pd_idx].flags);
+ *target = pd_idx;
+ target = &sh->ops.target2;
+ s->uptodate++;
+ }
+ if (sh->ops.zero_sum_result & SUM_CHECK_Q_RESULT) {
+ set_bit(R5_Wantcompute,
+ &sh->dev[qd_idx].flags);
+ *target = qd_idx;
+ s->uptodate++;
+ }
+ }
+ }
+ break;
+ case check_state_compute_run:
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown check_state: %d sector: %llu\n",
+ __func__, sh->check_state,
+ (unsigned long long) sh->sector);
+ BUG();
}
}
if (i != sh->pd_idx && i != sh->qd_idx) {
int dd_idx, j;
struct stripe_head *sh2;
+ struct async_submit_ctl submit;
sector_t bn = compute_blocknr(sh, i, 1);
sector_t s = raid5_compute_sector(conf, bn, 0,
}
/* place all the copies on one channel */
+ init_async_submit(&submit, 0, tx, NULL, NULL, NULL);
tx = async_memcpy(sh2->dev[dd_idx].page,
- sh->dev[i].page, 0, 0, STRIPE_SIZE,
- ASYNC_TX_DEP_ACK, tx, NULL, NULL);
+ sh->dev[i].page, 0, 0, STRIPE_SIZE,
+ &submit);
set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
rcu_read_lock();
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
- struct r5dev *dev = &sh->dev[i];
+
+ dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
pr_debug("check %d: state 0x%lx toread %p read %p write %p "
/* Need to write out all blocks after computing parity */
sh->disks = conf->raid_disks;
stripe_set_idx(sh->sector, conf, 0, sh);
- schedule_reconstruction5(sh, &s, 1, 1);
+ schedule_reconstruction(sh, &s, 1, 1);
} else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
if (s.ops_request)
- raid5_run_ops(sh, s.ops_request);
+ raid_run_ops(sh, s.ops_request);
ops_run_io(sh, &s);
return blocked_rdev == NULL;
}
-static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
+static bool handle_stripe6(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks;
mdk_rdev_t *blocked_rdev = NULL;
pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
- "pd_idx=%d, qd_idx=%d\n",
+ "pd_idx=%d, qd_idx=%d\n, check:%d, reconstruct:%d\n",
(unsigned long long)sh->sector, sh->state,
- atomic_read(&sh->count), pd_idx, qd_idx);
+ atomic_read(&sh->count), pd_idx, qd_idx,
+ sh->check_state, sh->reconstruct_state);
memset(&s, 0, sizeof(s));
spin_lock(&sh->lock);
pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
i, dev->flags, dev->toread, dev->towrite, dev->written);
- /* maybe we can reply to a read */
- if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
- struct bio *rbi, *rbi2;
- pr_debug("Return read for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- rbi = dev->toread;
- dev->toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &dev->flags))
- wake_up(&conf->wait_for_overlap);
- spin_unlock_irq(&conf->device_lock);
- while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- copy_data(0, rbi, dev->page, dev->sector);
- rbi2 = r5_next_bio(rbi, dev->sector);
- spin_lock_irq(&conf->device_lock);
- if (!raid5_dec_bi_phys_segments(rbi)) {
- rbi->bi_next = return_bi;
- return_bi = rbi;
- }
- spin_unlock_irq(&conf->device_lock);
- rbi = rbi2;
- }
- }
+ /* maybe we can reply to a read
+ *
+ * new wantfill requests are only permitted while
+ * ops_complete_biofill is guaranteed to be inactive
+ */
+ if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread &&
+ !test_bit(STRIPE_BIOFILL_RUN, &sh->state))
+ set_bit(R5_Wantfill, &dev->flags);
/* now count some things */
if (test_bit(R5_LOCKED, &dev->flags)) s.locked++;
if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++;
+ if (test_bit(R5_Wantcompute, &dev->flags)) {
+ s.compute++;
+ BUG_ON(s.compute > 2);
+ }
-
- if (dev->toread)
+ if (test_bit(R5_Wantfill, &dev->flags)) {
+ s.to_fill++;
+ } else if (dev->toread)
s.to_read++;
if (dev->towrite) {
s.to_write++;
blocked_rdev = NULL;
}
+ if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
+ set_bit(STRIPE_OP_BIOFILL, &s.ops_request);
+ set_bit(STRIPE_BIOFILL_RUN, &sh->state);
+ }
+
pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d,%d\n",
s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
* or to load a block that is being partially written.
*/
if (s.to_read || s.non_overwrite || (s.to_write && s.failed) ||
- (s.syncing && (s.uptodate < disks)) || s.expanding)
+ (s.syncing && (s.uptodate + s.compute < disks)) || s.expanding)
handle_stripe_fill6(sh, &s, &r6s, disks);
- /* now to consider writing and what else, if anything should be read */
- if (s.to_write)
+ /* Now we check to see if any write operations have recently
+ * completed
+ */
+ if (sh->reconstruct_state == reconstruct_state_drain_result) {
+ int qd_idx = sh->qd_idx;
+
+ sh->reconstruct_state = reconstruct_state_idle;
+ /* All the 'written' buffers and the parity blocks are ready to
+ * be written back to disk
+ */
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[qd_idx].flags));
+ for (i = disks; i--; ) {
+ dev = &sh->dev[i];
+ if (test_bit(R5_LOCKED, &dev->flags) &&
+ (i == sh->pd_idx || i == qd_idx ||
+ dev->written)) {
+ pr_debug("Writing block %d\n", i);
+ BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
+ set_bit(R5_Wantwrite, &dev->flags);
+ if (!test_bit(R5_Insync, &dev->flags) ||
+ ((i == sh->pd_idx || i == qd_idx) &&
+ s.failed == 0))
+ set_bit(STRIPE_INSYNC, &sh->state);
+ }
+ }
+ if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ atomic_dec(&conf->preread_active_stripes);
+ if (atomic_read(&conf->preread_active_stripes) <
+ IO_THRESHOLD)
+ md_wakeup_thread(conf->mddev->thread);
+ }
+ }
+
+ /* Now to consider new write requests and what else, if anything
+ * should be read. We do not handle new writes when:
+ * 1/ A 'write' operation (copy+gen_syndrome) is already in flight.
+ * 2/ A 'check' operation is in flight, as it may clobber the parity
+ * block.
+ */
+ if (s.to_write && !sh->reconstruct_state && !sh->check_state)
handle_stripe_dirtying6(conf, sh, &s, &r6s, disks);
/* maybe we need to check and possibly fix the parity for this stripe
* Any reads will already have been scheduled, so we just see if enough
- * data is available
+ * data is available. The parity check is held off while parity
+ * dependent operations are in flight.
*/
- if (s.syncing && s.locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state))
- handle_parity_checks6(conf, sh, &s, &r6s, tmp_page, disks);
+ if (sh->check_state ||
+ (s.syncing && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
+ !test_bit(STRIPE_INSYNC, &sh->state)))
+ handle_parity_checks6(conf, sh, &s, &r6s, disks);
if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS,1);
set_bit(R5_Wantwrite, &dev->flags);
set_bit(R5_ReWrite, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
+ s.locked++;
} else {
/* let's read it back */
set_bit(R5_Wantread, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
+ s.locked++;
}
}
}
- if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
+ /* Finish reconstruct operations initiated by the expansion process */
+ if (sh->reconstruct_state == reconstruct_state_result) {
+ sh->reconstruct_state = reconstruct_state_idle;
+ clear_bit(STRIPE_EXPANDING, &sh->state);
+ for (i = conf->raid_disks; i--; ) {
+ set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ set_bit(R5_LOCKED, &sh->dev[i].flags);
+ s.locked++;
+ }
+ }
+
+ if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
+ !sh->reconstruct_state) {
struct stripe_head *sh2
= get_active_stripe(conf, sh->sector, 1, 1, 1);
if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
/* Need to write out all blocks after computing P&Q */
sh->disks = conf->raid_disks;
stripe_set_idx(sh->sector, conf, 0, sh);
- compute_parity6(sh, RECONSTRUCT_WRITE);
- for (i = conf->raid_disks ; i-- ; ) {
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- s.locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- }
- clear_bit(STRIPE_EXPANDING, &sh->state);
- } else if (s.expanded) {
+ schedule_reconstruction(sh, &s, 1, 1);
+ } else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
wake_up(&conf->wait_for_overlap);
if (unlikely(blocked_rdev))
md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
+ if (s.ops_request)
+ raid_run_ops(sh, s.ops_request);
+
ops_run_io(sh, &s);
return_io(return_bi);
}
/* returns true if the stripe was handled */
-static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page)
+static bool handle_stripe(struct stripe_head *sh)
{
if (sh->raid_conf->level == 6)
- return handle_stripe6(sh, tmp_page);
+ return handle_stripe6(sh);
else
return handle_stripe5(sh);
}
-
-
static void raid5_activate_delayed(raid5_conf_t *conf)
{
if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) {
/* No difference between reads and writes. Just check
* how busy the stripe_cache is
*/
+
+ if (mddev_congested(mddev, bits))
+ return 1;
if (conf->inactive_blocked)
return 1;
if (conf->quiesce)
INIT_LIST_HEAD(&stripes);
for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) {
int j;
- int skipped = 0;
+ int skipped_disk = 0;
sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1);
set_bit(STRIPE_EXPANDING, &sh->state);
atomic_inc(&conf->reshape_stripes);
continue;
s = compute_blocknr(sh, j, 0);
if (s < raid5_size(mddev, 0, 0)) {
- skipped = 1;
+ skipped_disk = 1;
continue;
}
memset(page_address(sh->dev[j].page), 0, STRIPE_SIZE);
set_bit(R5_Expanded, &sh->dev[j].flags);
set_bit(R5_UPTODATE, &sh->dev[j].flags);
}
- if (!skipped) {
+ if (!skipped_disk) {
set_bit(STRIPE_EXPAND_READY, &sh->state);
set_bit(STRIPE_HANDLE, &sh->state);
}
spin_unlock(&sh->lock);
/* wait for any blocked device to be handled */
- while(unlikely(!handle_stripe(sh, NULL)))
+ while (unlikely(!handle_stripe(sh)))
;
release_stripe(sh);
return handled;
}
- handle_stripe(sh, NULL);
+ handle_stripe(sh);
release_stripe(sh);
handled++;
}
return handled;
}
+#ifdef CONFIG_MULTICORE_RAID456
+static void __process_stripe(void *param, async_cookie_t cookie)
+{
+ struct stripe_head *sh = param;
+
+ handle_stripe(sh);
+ release_stripe(sh);
+}
+
+static void process_stripe(struct stripe_head *sh, struct list_head *domain)
+{
+ async_schedule_domain(__process_stripe, sh, domain);
+}
+
+static void synchronize_stripe_processing(struct list_head *domain)
+{
+ async_synchronize_full_domain(domain);
+}
+#else
+static void process_stripe(struct stripe_head *sh, struct list_head *domain)
+{
+ handle_stripe(sh);
+ release_stripe(sh);
+ cond_resched();
+}
+
+static void synchronize_stripe_processing(struct list_head *domain)
+{
+}
+#endif
/*
struct stripe_head *sh;
raid5_conf_t *conf = mddev->private;
int handled;
+ LIST_HEAD(raid_domain);
pr_debug("+++ raid5d active\n");
spin_unlock_irq(&conf->device_lock);
handled++;
- handle_stripe(sh, conf->spare_page);
- release_stripe(sh);
+ process_stripe(sh, &raid_domain);
spin_lock_irq(&conf->device_lock);
}
spin_unlock_irq(&conf->device_lock);
+ synchronize_stripe_processing(&raid_domain);
async_tx_issue_pending_all();
unplug_slaves(mddev);
return sectors * (raid_disks - conf->max_degraded);
}
+static void raid5_free_percpu(raid5_conf_t *conf)
+{
+ struct raid5_percpu *percpu;
+ unsigned long cpu;
+
+ if (!conf->percpu)
+ return;
+
+ get_online_cpus();
+ for_each_possible_cpu(cpu) {
+ percpu = per_cpu_ptr(conf->percpu, cpu);
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ }
+#ifdef CONFIG_HOTPLUG_CPU
+ unregister_cpu_notifier(&conf->cpu_notify);
+#endif
+ put_online_cpus();
+
+ free_percpu(conf->percpu);
+}
+
static void free_conf(raid5_conf_t *conf)
{
shrink_stripes(conf);
- safe_put_page(conf->spare_page);
+ raid5_free_percpu(conf);
kfree(conf->disks);
kfree(conf->stripe_hashtbl);
kfree(conf);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static int raid456_cpu_notify(struct notifier_block *nfb, unsigned long action,
+ void *hcpu)
+{
+ raid5_conf_t *conf = container_of(nfb, raid5_conf_t, cpu_notify);
+ long cpu = (long)hcpu;
+ struct raid5_percpu *percpu = per_cpu_ptr(conf->percpu, cpu);
+
+ switch (action) {
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ if (conf->level == 6 && !percpu->spare_page)
+ percpu->spare_page = alloc_page(GFP_KERNEL);
+ if (!percpu->scribble)
+ percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
+
+ if (!percpu->scribble ||
+ (conf->level == 6 && !percpu->spare_page)) {
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ pr_err("%s: failed memory allocation for cpu%ld\n",
+ __func__, cpu);
+ return NOTIFY_BAD;
+ }
+ break;
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ percpu->spare_page = NULL;
+ percpu->scribble = NULL;
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+#endif
+
+static int raid5_alloc_percpu(raid5_conf_t *conf)
+{
+ unsigned long cpu;
+ struct page *spare_page;
+ struct raid5_percpu *allcpus;
+ void *scribble;
+ int err;
+
+ allcpus = alloc_percpu(struct raid5_percpu);
+ if (!allcpus)
+ return -ENOMEM;
+ conf->percpu = allcpus;
+
+ get_online_cpus();
+ err = 0;
+ for_each_present_cpu(cpu) {
+ if (conf->level == 6) {
+ spare_page = alloc_page(GFP_KERNEL);
+ if (!spare_page) {
+ err = -ENOMEM;
+ break;
+ }
+ per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page;
+ }
+ scribble = kmalloc(scribble_len(conf->raid_disks), GFP_KERNEL);
+ if (!scribble) {
+ err = -ENOMEM;
+ break;
+ }
+ per_cpu_ptr(conf->percpu, cpu)->scribble = scribble;
+ }
+#ifdef CONFIG_HOTPLUG_CPU
+ conf->cpu_notify.notifier_call = raid456_cpu_notify;
+ conf->cpu_notify.priority = 0;
+ if (err == 0)
+ err = register_cpu_notifier(&conf->cpu_notify);
+#endif
+ put_online_cpus();
+
+ return err;
+}
+
static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
goto abort;
conf->raid_disks = mddev->raid_disks;
+ conf->scribble_len = scribble_len(conf->raid_disks);
if (mddev->reshape_position == MaxSector)
conf->previous_raid_disks = mddev->raid_disks;
else
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->new_level == 6) {
- conf->spare_page = alloc_page(GFP_KERNEL);
- if (!conf->spare_page)
- goto abort;
- }
+ conf->level = mddev->new_level;
+ if (raid5_alloc_percpu(conf) != 0)
+ goto abort;
+
spin_lock_init(&conf->device_lock);
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
printk(KERN_INFO "raid5: allocated %dkB for %s\n",
memory, mdname(mddev));
- conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ conf->thread = md_register_thread(raid5d, mddev, NULL);
if (!conf->thread) {
printk(KERN_ERR
"raid5: couldn't allocate thread for %s\n",
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
- "%s_reshape");
+ "reshape");
}
/* read-ahead size must cover two whole stripes, which is
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
- "%s_reshape");
+ "reshape");
if (!mddev->sync_thread) {
mddev->recovery = 0;
spin_lock_irq(&conf->device_lock);
#define _RAID5_H
#include <linux/raid/xor.h>
+#include <linux/dmaengine.h>
/*
*
*/
enum check_states {
check_state_idle = 0,
- check_state_run, /* parity check */
+ check_state_run, /* xor parity check */
+ check_state_run_q, /* q-parity check */
+ check_state_run_pq, /* pq dual parity check */
check_state_check_result,
check_state_compute_run, /* parity repair */
check_state_compute_result,
* @target - STRIPE_OP_COMPUTE_BLK target
*/
struct stripe_operations {
- int target;
- u32 zero_sum_result;
+ int target, target2;
+ enum sum_check_flags zero_sum_result;
} ops;
struct r5dev {
struct bio req;
#define STRIPE_OP_COMPUTE_BLK 1
#define STRIPE_OP_PREXOR 2
#define STRIPE_OP_BIODRAIN 3
-#define STRIPE_OP_POSTXOR 4
+#define STRIPE_OP_RECONSTRUCT 4
#define STRIPE_OP_CHECK 5
/*
* (fresh device added).
* Cleared when a sync completes.
*/
-
- struct page *spare_page; /* Used when checking P/Q in raid6 */
+ /* per cpu variables */
+ struct raid5_percpu {
+ struct page *spare_page; /* Used when checking P/Q in raid6 */
+ void *scribble; /* space for constructing buffer
+ * lists and performing address
+ * conversions
+ */
+ } *percpu;
+ size_t scribble_len; /* size of scribble region must be
+ * associated with conf to handle
+ * cpu hotplug while reshaping
+ */
+#ifdef CONFIG_HOTPLUG_CPU
+ struct notifier_block cpu_notify;
+#endif
/*
* Free stripes pool
#define DVB_MAJOR 212
#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0
-#define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
+ #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
#else
-#warning invalid CONFIG_DVB_MAX_ADAPTERS value
-#define DVB_MAX_ADAPTERS 8
+ #define DVB_MAX_ADAPTERS 8
#endif
#define DVB_UNSET (-1)
select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
- select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_DIB0070
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
goto out;
}
- if (debug & DBGLVL_API)
+ if (saa_debug & DBGLVL_API)
saa7164_dumphex16(dev, buf, (buflen/16)*16);
saa7164_api_dump_subdevs(dev, buf, buflen);
dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, 2 * 16);
ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
if (ret != SAA_OK)
printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
else {
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
}
*((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen;
memcpy((buf + 2 * sizeof(u32)), data, datalen);
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,
unsigned long stamp;
int r;
- if (debug >= 4)
+ if (saa_debug >= 4)
saa7164_bus_dump(dev);
dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);
32 bus
*/
-unsigned int debug;
-module_param(debug, int, 0644);
+unsigned int saa_debug;
+module_param_named(debug, saa_debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
unsigned int waitsecs = 10;
printk(KERN_ERR "%s() Unsupported board detected, "
"registering without firmware\n", __func__);
- dprintk(1, "%s() parameter debug = %d\n", __func__, debug);
+ dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
fail_fw:
/* ----------------------------------------------------------- */
-extern unsigned int debug;
+extern unsigned int saa_debug;
#define dprintk(level, fmt, arg...)\
- do { if (debug & level)\
+ do { if (saa_debug & level)\
printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
} while (0)
"SuperH Mobile CEU driver attached to camera %d\n",
icd->devnum);
- clk_enable(pcdev->clk);
+ pm_runtime_get_sync(ici->v4l2_dev.dev);
ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
while (ceu_read(pcdev, CSTSR) & 1)
}
spin_unlock_irqrestore(&pcdev->lock, flags);
- clk_disable(pcdev->clk);
+ pm_runtime_put_sync(ici->v4l2_dev.dev);
dev_info(icd->dev.parent,
"SuperH Mobile CEU driver detached from camera %d\n",
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
card->id.type = id_reg.type;
card->id.category = id_reg.category;
card->id.class = id_reg.class;
+ dev_dbg(&card->dev, "if_mode = %02x\n", id_reg.if_mode);
}
complete(&card->mrq_complete);
- dev_dbg(&card->dev, "if_mode = %02x\n", id_reg.if_mode);
return -EAGAIN;
}
}
/* Need 1K cacheline aligned that does not cross page boundary */
p = kmalloc(4096, 0);
+ if (p == NULL)
+ return -ENOMEM;
mq = ALIGNUP(p, 1024);
memset(mes, 0xee, sizeof(mes));
dw = mq;
static int create_proc_file(struct proc_entry *p)
{
- p->entry = create_proc_entry(p->name, p->mode, proc_gru);
+ p->entry = proc_create(p->name, p->mode, proc_gru, p->fops);
if (!p->entry)
return -1;
- p->entry->proc_fops = p->fops;
return 0;
}
struct scatterlist *sg;
unsigned int i;
enum dma_data_direction direction;
+ unsigned int sglen;
/*
* We don't do DMA on "complex" transfers, i.e. with
else
direction = DMA_TO_DEVICE;
+ sglen = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, direction);
+ if (sglen != data->sg_len)
+ goto unmap_exit;
desc = chan->device->device_prep_slave_sg(chan,
data->sg, data->sg_len, direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc)
- return -ENOMEM;
+ goto unmap_exit;
host->dma.data_desc = desc;
desc->callback = atmci_dma_complete;
chan->device->device_issue_pending(chan);
return 0;
+unmap_exit:
+ dma_unmap_sg(&host->pdev->dev, data->sg, sglen, direction);
+ return -ENOMEM;
}
#else /* CONFIG_MMC_ATMELMCI_DMA */
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/gpio.h>
+#include <linux/amba/mmci.h>
+#include <linux/regulator/consumer.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/mach/mmc.h>
#include "mmci.h"
static unsigned int fmax = 515633;
+/*
+ * This must be called with host->lock held
+ */
+static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
+{
+ u32 clk = 0;
+
+ if (desired) {
+ if (desired >= host->mclk) {
+ clk = MCI_CLK_BYPASS;
+ host->cclk = host->mclk;
+ } else {
+ clk = host->mclk / (2 * desired) - 1;
+ if (clk >= 256)
+ clk = 255;
+ host->cclk = host->mclk / (2 * (clk + 1));
+ }
+ if (host->hw_designer == 0x80)
+ clk |= MCI_FCEN; /* Bug fix in ST IP block */
+ clk |= MCI_CLK_ENABLE;
+ /* This hasn't proven to be worthwhile */
+ /* clk |= MCI_CLK_PWRSAVE; */
+ }
+
+ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
+ clk |= MCI_WIDE_BUS;
+
+ writel(clk, host->base + MMCICLOCK);
+}
+
static void
mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
{
static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmci_host *host = mmc_priv(mmc);
- u32 clk = 0, pwr = 0;
-
- if (ios->clock) {
- if (ios->clock >= host->mclk) {
- clk = MCI_CLK_BYPASS;
- host->cclk = host->mclk;
- } else {
- clk = host->mclk / (2 * ios->clock) - 1;
- if (clk >= 256)
- clk = 255;
- host->cclk = host->mclk / (2 * (clk + 1));
- }
- if (host->hw_designer == AMBA_VENDOR_ST)
- clk |= MCI_FCEN; /* Bug fix in ST IP block */
- clk |= MCI_CLK_ENABLE;
- }
-
- if (host->plat->translate_vdd)
- pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+ u32 pwr = 0;
+ unsigned long flags;
switch (ios->power_mode) {
case MMC_POWER_OFF:
+ if(host->vcc &&
+ regulator_is_enabled(host->vcc))
+ regulator_disable(host->vcc);
break;
case MMC_POWER_UP:
+#ifdef CONFIG_REGULATOR
+ if (host->vcc)
+ /* This implicitly enables the regulator */
+ mmc_regulator_set_ocr(host->vcc, ios->vdd);
+#endif
+ /*
+ * The translate_vdd function is not used if you have
+ * an external regulator, or your design is really weird.
+ * Using it would mean sending in power control BOTH using
+ * a regulator AND the 4 MMCIPWR bits. If we don't have
+ * a regulator, we might have some other platform specific
+ * power control behind this translate function.
+ */
+ if (!host->vcc && host->plat->translate_vdd)
+ pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
/* The ST version does not have this, fall through to POWER_ON */
if (host->hw_designer != AMBA_VENDOR_ST) {
pwr |= MCI_PWR_UP;
}
}
- writel(clk, host->base + MMCICLOCK);
+ spin_lock_irqsave(&host->lock, flags);
+
+ mmci_set_clkreg(host, ios->clock);
if (host->pwr != pwr) {
host->pwr = pwr;
writel(pwr, host->base + MMCIPOWER);
}
+
+ spin_unlock_irqrestore(&host->lock, flags);
}
static int mmci_get_ro(struct mmc_host *mmc)
static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
{
- struct mmc_platform_data *plat = dev->dev.platform_data;
+ struct mmci_platform_data *plat = dev->dev.platform_data;
struct mmci_host *host;
struct mmc_host *mmc;
int ret;
mmc->ops = &mmci_ops;
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
- mmc->ocr_avail = plat->ocr_mask;
+#ifdef CONFIG_REGULATOR
+ /* If we're using the regulator framework, try to fetch a regulator */
+ host->vcc = regulator_get(&dev->dev, "vmmc");
+ if (IS_ERR(host->vcc))
+ host->vcc = NULL;
+ else {
+ int mask = mmc_regulator_get_ocrmask(host->vcc);
+
+ if (mask < 0)
+ dev_err(&dev->dev, "error getting OCR mask (%d)\n",
+ mask);
+ else {
+ host->mmc->ocr_avail = (u32) mask;
+ if (plat->ocr_mask)
+ dev_warn(&dev->dev,
+ "Provided ocr_mask/setpower will not be used "
+ "(using regulator instead)\n");
+ }
+ }
+#endif
+ /* Fall back to platform data if no regulator is found */
+ if (host->vcc == NULL)
+ mmc->ocr_avail = plat->ocr_mask;
+ mmc->caps = plat->capabilities;
/*
* We can do SGIO
clk_disable(host->clk);
clk_put(host->clk);
+ if (regulator_is_enabled(host->vcc))
+ regulator_disable(host->vcc);
+ regulator_put(host->vcc);
+
mmc_free_host(mmc);
amba_release_regions(dev);
unsigned int mclk;
unsigned int cclk;
u32 pwr;
- struct mmc_platform_data *plat;
+ struct mmci_platform_data *plat;
u8 hw_designer;
u8 hw_revision:4;
struct scatterlist *sg_ptr;
unsigned int sg_off;
unsigned int size;
+ struct regulator *vcc;
};
static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
#include <linux/mmc/host.h>
#include <linux/io.h>
#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
#include <asm/sizes.h>
static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
{
+ int on;
+
#ifdef CONFIG_REGULATOR
if (host->vcc)
mmc_regulator_set_ocr(host->vcc, vdd);
#endif
+ if (!host->vcc && host->pdata &&
+ gpio_is_valid(host->pdata->gpio_power)) {
+ on = ((1 << vdd) & host->pdata->ocr_mask);
+ gpio_set_value(host->pdata->gpio_power,
+ !!on ^ host->pdata->gpio_power_invert);
+ }
if (!host->vcc && host->pdata && host->pdata->setpower)
host->pdata->setpower(mmc_dev(host->mmc), vdd);
}
{
struct pxamci_host *host = mmc_priv(mmc);
+ if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
+ if (host->pdata->gpio_card_ro_invert)
+ return !gpio_get_value(host->pdata->gpio_card_ro);
+ else
+ return gpio_get_value(host->pdata->gpio_card_ro);
+ }
if (host->pdata && host->pdata->get_ro)
return !!host->pdata->get_ro(mmc_dev(mmc));
/*
struct mmc_host *mmc;
struct pxamci_host *host = NULL;
struct resource *r, *dmarx, *dmatx;
- int ret, irq;
+ int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
}
host->dma_drcmrtx = dmatx->start;
+ if (host->pdata) {
+ gpio_cd = host->pdata->gpio_card_detect;
+ gpio_ro = host->pdata->gpio_card_ro;
+ gpio_power = host->pdata->gpio_power;
+ }
+ if (gpio_is_valid(gpio_power)) {
+ ret = gpio_request(gpio_power, "mmc card power");
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
+ goto out;
+ }
+ gpio_direction_output(gpio_power,
+ host->pdata->gpio_power_invert);
+ }
+ if (gpio_is_valid(gpio_ro)) {
+ ret = gpio_request(gpio_ro, "mmc card read only");
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power);
+ goto err_gpio_ro;
+ }
+ gpio_direction_input(gpio_ro);
+ }
+ if (gpio_is_valid(gpio_cd)) {
+ ret = gpio_request(gpio_cd, "mmc card detect");
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power);
+ goto err_gpio_cd;
+ }
+ gpio_direction_input(gpio_cd);
+
+ ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "mmc card detect", mmc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request card detect IRQ\n");
+ goto err_request_irq;
+ }
+ }
+
if (host->pdata && host->pdata->init)
host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
+ if (gpio_is_valid(gpio_power) && host->pdata->setpower)
+ dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n");
+ if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
+ dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n");
+
mmc_add_host(mmc);
return 0;
+err_request_irq:
+ gpio_free(gpio_cd);
+err_gpio_cd:
+ gpio_free(gpio_ro);
+err_gpio_ro:
+ gpio_free(gpio_power);
out:
if (host) {
if (host->dma >= 0)
static int pxamci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
+ int gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
platform_set_drvdata(pdev, NULL);
if (mmc) {
struct pxamci_host *host = mmc_priv(mmc);
+ if (host->pdata) {
+ gpio_cd = host->pdata->gpio_card_detect;
+ gpio_ro = host->pdata->gpio_card_ro;
+ gpio_power = host->pdata->gpio_power;
+ }
+ if (gpio_is_valid(gpio_cd)) {
+ free_irq(gpio_to_irq(gpio_cd), mmc);
+ gpio_free(gpio_cd);
+ }
+ if (gpio_is_valid(gpio_ro))
+ gpio_free(gpio_ro);
+ if (gpio_is_valid(gpio_power))
+ gpio_free(gpio_power);
if (host->vcc)
regulator_put(host->vcc);
}
#ifdef CONFIG_PM
-static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
+static int pxamci_suspend(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
if (mmc)
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
return ret;
}
-static int pxamci_resume(struct platform_device *dev)
+static int pxamci_resume(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
if (mmc)
return ret;
}
-#else
-#define pxamci_suspend NULL
-#define pxamci_resume NULL
+
+static struct dev_pm_ops pxamci_pm_ops = {
+ .suspend = pxamci_suspend,
+ .resume = pxamci_resume,
+};
#endif
static struct platform_driver pxamci_driver = {
.probe = pxamci_probe,
.remove = pxamci_remove,
- .suspend = pxamci_suspend,
- .resume = pxamci_resume,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pxamci_pm_ops,
+#endif
},
};
config MTD_OF_PARTS
tristate "Flash partition map based on OF description"
- depends on PPC_OF && MTD_PARTITIONS
+ depends on (MICROBLAZE || PPC_OF) && MTD_PARTITIONS
help
This provides a partition parsing function which derives
the partition map from the children of the flash node,
config MTD_PHYSMAP_OF
tristate "Flash device in physical memory map based on OF description"
- depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+ depends on (MICROBLAZE || PPC_OF) && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
help
This provides a 'mapping' driver which allows the NOR Flash and
ROM driver code to communicate with chips which are mapped
if (netif_running(dev)) {
netif_device_detach(dev);
vortex_down(dev, 1);
+ disable_irq(dev->irq);
}
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
- free_irq(dev->irq, dev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
}
return err;
}
pci_set_master(pdev);
- if (request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
- pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
- pci_disable_device(pdev);
- return -EBUSY;
- }
if (netif_running(dev)) {
err = vortex_up(dev);
if (err)
return err;
- else
- netif_device_attach(dev);
+ enable_irq(dev->irq);
+ netif_device_attach(dev);
}
}
return 0;
/* These identify the driver base version and may not be removed. */
static char version[] =
-KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
+DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver");
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35
+ depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
u32 ctrl;
u32 mac_ctrl_data;
u32 master_ctrl_data;
- u32 wol_ctrl_data;
+ u32 wol_ctrl_data = 0;
u16 mii_bmsr_data;
u16 save_autoneg_advertised;
u16 mii_intr_status_data;
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
+config CAN_EMS_USB
+ tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+ depends on USB && CAN_DEV
+ ---help---
+ This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+ from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI && CAN_SJA1000
This driver is for the the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
+config CAN_AT91
+ tristate "Atmel AT91 onchip CAN controller"
+ depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+ ---help---
+ This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
obj-$(CONFIG_CAN_DEV) += can-dev.o
can-dev-y := dev.o
+obj-y += usb/
+
obj-$(CONFIG_CAN_SJA1000) += sja1000/
+obj-$(CONFIG_CAN_AT91) += at91_can.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
--- /dev/null
+/*
+ * at91_can.c - CAN network driver for AT91 SoC CAN controller
+ *
+ * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2 as distributed in the 'COPYING'
+ * file from the main directory of the linux kernel source.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ *
+ * Your platform definition file should specify something like:
+ *
+ * static struct at91_can_data ek_can_data = {
+ * transceiver_switch = sam9263ek_transceiver_switch,
+ * };
+ *
+ * at91_add_device_can(&ek_can_data);
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include <mach/board.h>
+
+#define DRV_NAME "at91_can"
+#define AT91_NAPI_WEIGHT 12
+
+/*
+ * RX/TX Mailbox split
+ * don't dare to touch
+ */
+#define AT91_MB_RX_NUM 12
+#define AT91_MB_TX_SHIFT 2
+
+#define AT91_MB_RX_FIRST 0
+#define AT91_MB_RX_LAST (AT91_MB_RX_FIRST + AT91_MB_RX_NUM - 1)
+
+#define AT91_MB_RX_MASK(i) ((1 << (i)) - 1)
+#define AT91_MB_RX_SPLIT 8
+#define AT91_MB_RX_LOW_LAST (AT91_MB_RX_SPLIT - 1)
+#define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT))
+
+#define AT91_MB_TX_NUM (1 << AT91_MB_TX_SHIFT)
+#define AT91_MB_TX_FIRST (AT91_MB_RX_LAST + 1)
+#define AT91_MB_TX_LAST (AT91_MB_TX_FIRST + AT91_MB_TX_NUM - 1)
+
+#define AT91_NEXT_PRIO_SHIFT (AT91_MB_TX_SHIFT)
+#define AT91_NEXT_PRIO_MASK (0xf << AT91_MB_TX_SHIFT)
+#define AT91_NEXT_MB_MASK (AT91_MB_TX_NUM - 1)
+#define AT91_NEXT_MASK ((AT91_MB_TX_NUM - 1) | AT91_NEXT_PRIO_MASK)
+
+/* Common registers */
+enum at91_reg {
+ AT91_MR = 0x000,
+ AT91_IER = 0x004,
+ AT91_IDR = 0x008,
+ AT91_IMR = 0x00C,
+ AT91_SR = 0x010,
+ AT91_BR = 0x014,
+ AT91_TIM = 0x018,
+ AT91_TIMESTP = 0x01C,
+ AT91_ECR = 0x020,
+ AT91_TCR = 0x024,
+ AT91_ACR = 0x028,
+};
+
+/* Mailbox registers (0 <= i <= 15) */
+#define AT91_MMR(i) (enum at91_reg)(0x200 + ((i) * 0x20))
+#define AT91_MAM(i) (enum at91_reg)(0x204 + ((i) * 0x20))
+#define AT91_MID(i) (enum at91_reg)(0x208 + ((i) * 0x20))
+#define AT91_MFID(i) (enum at91_reg)(0x20C + ((i) * 0x20))
+#define AT91_MSR(i) (enum at91_reg)(0x210 + ((i) * 0x20))
+#define AT91_MDL(i) (enum at91_reg)(0x214 + ((i) * 0x20))
+#define AT91_MDH(i) (enum at91_reg)(0x218 + ((i) * 0x20))
+#define AT91_MCR(i) (enum at91_reg)(0x21C + ((i) * 0x20))
+
+/* Register bits */
+#define AT91_MR_CANEN BIT(0)
+#define AT91_MR_LPM BIT(1)
+#define AT91_MR_ABM BIT(2)
+#define AT91_MR_OVL BIT(3)
+#define AT91_MR_TEOF BIT(4)
+#define AT91_MR_TTM BIT(5)
+#define AT91_MR_TIMFRZ BIT(6)
+#define AT91_MR_DRPT BIT(7)
+
+#define AT91_SR_RBSY BIT(29)
+
+#define AT91_MMR_PRIO_SHIFT (16)
+
+#define AT91_MID_MIDE BIT(29)
+
+#define AT91_MSR_MRTR BIT(20)
+#define AT91_MSR_MABT BIT(22)
+#define AT91_MSR_MRDY BIT(23)
+#define AT91_MSR_MMI BIT(24)
+
+#define AT91_MCR_MRTR BIT(20)
+#define AT91_MCR_MTCR BIT(23)
+
+/* Mailbox Modes */
+enum at91_mb_mode {
+ AT91_MB_MODE_DISABLED = 0,
+ AT91_MB_MODE_RX = 1,
+ AT91_MB_MODE_RX_OVRWR = 2,
+ AT91_MB_MODE_TX = 3,
+ AT91_MB_MODE_CONSUMER = 4,
+ AT91_MB_MODE_PRODUCER = 5,
+};
+
+/* Interrupt mask bits */
+#define AT91_IRQ_MB_RX ((1 << (AT91_MB_RX_LAST + 1)) \
+ - (1 << AT91_MB_RX_FIRST))
+#define AT91_IRQ_MB_TX ((1 << (AT91_MB_TX_LAST + 1)) \
+ - (1 << AT91_MB_TX_FIRST))
+#define AT91_IRQ_MB_ALL (AT91_IRQ_MB_RX | AT91_IRQ_MB_TX)
+
+#define AT91_IRQ_ERRA (1 << 16)
+#define AT91_IRQ_WARN (1 << 17)
+#define AT91_IRQ_ERRP (1 << 18)
+#define AT91_IRQ_BOFF (1 << 19)
+#define AT91_IRQ_SLEEP (1 << 20)
+#define AT91_IRQ_WAKEUP (1 << 21)
+#define AT91_IRQ_TOVF (1 << 22)
+#define AT91_IRQ_TSTP (1 << 23)
+#define AT91_IRQ_CERR (1 << 24)
+#define AT91_IRQ_SERR (1 << 25)
+#define AT91_IRQ_AERR (1 << 26)
+#define AT91_IRQ_FERR (1 << 27)
+#define AT91_IRQ_BERR (1 << 28)
+
+#define AT91_IRQ_ERR_ALL (0x1fff0000)
+#define AT91_IRQ_ERR_FRAME (AT91_IRQ_CERR | AT91_IRQ_SERR | \
+ AT91_IRQ_AERR | AT91_IRQ_FERR | AT91_IRQ_BERR)
+#define AT91_IRQ_ERR_LINE (AT91_IRQ_ERRA | AT91_IRQ_WARN | \
+ AT91_IRQ_ERRP | AT91_IRQ_BOFF)
+
+#define AT91_IRQ_ALL (0x1fffffff)
+
+struct at91_priv {
+ struct can_priv can; /* must be the first member! */
+ struct net_device *dev;
+ struct napi_struct napi;
+
+ void __iomem *reg_base;
+
+ u32 reg_sr;
+ unsigned int tx_next;
+ unsigned int tx_echo;
+ unsigned int rx_next;
+
+ struct clk *clk;
+ struct at91_can_data *pdata;
+};
+
+static struct can_bittiming_const at91_bittiming_const = {
+ .tseg1_min = 4,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 2,
+ .brp_max = 128,
+ .brp_inc = 1,
+};
+
+static inline int get_tx_next_mb(const struct at91_priv *priv)
+{
+ return (priv->tx_next & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST;
+}
+
+static inline int get_tx_next_prio(const struct at91_priv *priv)
+{
+ return (priv->tx_next >> AT91_NEXT_PRIO_SHIFT) & 0xf;
+}
+
+static inline int get_tx_echo_mb(const struct at91_priv *priv)
+{
+ return (priv->tx_echo & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST;
+}
+
+static inline u32 at91_read(const struct at91_priv *priv, enum at91_reg reg)
+{
+ return readl(priv->reg_base + reg);
+}
+
+static inline void at91_write(const struct at91_priv *priv, enum at91_reg reg,
+ u32 value)
+{
+ writel(value, priv->reg_base + reg);
+}
+
+static inline void set_mb_mode_prio(const struct at91_priv *priv,
+ unsigned int mb, enum at91_mb_mode mode, int prio)
+{
+ at91_write(priv, AT91_MMR(mb), (mode << 24) | (prio << 16));
+}
+
+static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb,
+ enum at91_mb_mode mode)
+{
+ set_mb_mode_prio(priv, mb, mode, 0);
+}
+
+static struct sk_buff *alloc_can_skb(struct net_device *dev,
+ struct can_frame **cf)
+{
+ struct sk_buff *skb;
+
+ skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
+ if (unlikely(!skb))
+ return NULL;
+
+ skb->protocol = htons(ETH_P_CAN);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+
+ return skb;
+}
+
+static struct sk_buff *alloc_can_err_skb(struct net_device *dev,
+ struct can_frame **cf)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_can_skb(dev, cf);
+ if (unlikely(!skb))
+ return NULL;
+
+ memset(*cf, 0, sizeof(struct can_frame));
+ (*cf)->can_id = CAN_ERR_FLAG;
+ (*cf)->can_dlc = CAN_ERR_DLC;
+
+ return skb;
+}
+
+/*
+ * Swtich transceiver on or off
+ */
+static void at91_transceiver_switch(const struct at91_priv *priv, int on)
+{
+ if (priv->pdata && priv->pdata->transceiver_switch)
+ priv->pdata->transceiver_switch(on);
+}
+
+static void at91_setup_mailboxes(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ unsigned int i;
+
+ /*
+ * The first 12 mailboxes are used as a reception FIFO. The
+ * last mailbox is configured with overwrite option. The
+ * overwrite flag indicates a FIFO overflow.
+ */
+ for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++)
+ set_mb_mode(priv, i, AT91_MB_MODE_RX);
+ set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR);
+
+ /* The last 4 mailboxes are used for transmitting. */
+ for (i = AT91_MB_TX_FIRST; i <= AT91_MB_TX_LAST; i++)
+ set_mb_mode_prio(priv, i, AT91_MB_MODE_TX, 0);
+
+ /* Reset tx and rx helper pointers */
+ priv->tx_next = priv->tx_echo = priv->rx_next = 0;
+}
+
+static int at91_set_bittiming(struct net_device *dev)
+{
+ const struct at91_priv *priv = netdev_priv(dev);
+ const struct can_bittiming *bt = &priv->can.bittiming;
+ u32 reg_br;
+
+ reg_br = ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) << 24) |
+ ((bt->brp - 1) << 16) | ((bt->sjw - 1) << 12) |
+ ((bt->prop_seg - 1) << 8) | ((bt->phase_seg1 - 1) << 4) |
+ ((bt->phase_seg2 - 1) << 0);
+
+ dev_info(dev->dev.parent, "writing AT91_BR: 0x%08x\n", reg_br);
+
+ at91_write(priv, AT91_BR, reg_br);
+
+ return 0;
+}
+
+static void at91_chip_start(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_mr, reg_ier;
+
+ /* disable interrupts */
+ at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
+
+ /* disable chip */
+ reg_mr = at91_read(priv, AT91_MR);
+ at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
+
+ at91_setup_mailboxes(dev);
+ at91_transceiver_switch(priv, 1);
+
+ /* enable chip */
+ at91_write(priv, AT91_MR, AT91_MR_CANEN);
+
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ /* Enable interrupts */
+ reg_ier = AT91_IRQ_MB_RX | AT91_IRQ_ERRP | AT91_IRQ_ERR_FRAME;
+ at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
+ at91_write(priv, AT91_IER, reg_ier);
+}
+
+static void at91_chip_stop(struct net_device *dev, enum can_state state)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_mr;
+
+ /* disable interrupts */
+ at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
+
+ reg_mr = at91_read(priv, AT91_MR);
+ at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
+
+ at91_transceiver_switch(priv, 0);
+ priv->can.state = state;
+}
+
+/*
+ * theory of operation:
+ *
+ * According to the datasheet priority 0 is the highest priority, 15
+ * is the lowest. If two mailboxes have the same priority level the
+ * message of the mailbox with the lowest number is sent first.
+ *
+ * We use the first TX mailbox (AT91_MB_TX_FIRST) with prio 0, then
+ * the next mailbox with prio 0, and so on, until all mailboxes are
+ * used. Then we start from the beginning with mailbox
+ * AT91_MB_TX_FIRST, but with prio 1, mailbox AT91_MB_TX_FIRST + 1
+ * prio 1. When we reach the last mailbox with prio 15, we have to
+ * stop sending, waiting for all messages to be delivered, then start
+ * again with mailbox AT91_MB_TX_FIRST prio 0.
+ *
+ * We use the priv->tx_next as counter for the next transmission
+ * mailbox, but without the offset AT91_MB_TX_FIRST. The lower bits
+ * encode the mailbox number, the upper 4 bits the mailbox priority:
+ *
+ * priv->tx_next = (prio << AT91_NEXT_PRIO_SHIFT) ||
+ * (mb - AT91_MB_TX_FIRST);
+ *
+ */
+static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ unsigned int mb, prio;
+ u32 reg_mid, reg_mcr;
+
+ mb = get_tx_next_mb(priv);
+ prio = get_tx_next_prio(priv);
+
+ if (unlikely(!(at91_read(priv, AT91_MSR(mb)) & AT91_MSR_MRDY))) {
+ netif_stop_queue(dev);
+
+ dev_err(dev->dev.parent,
+ "BUG! TX buffer full when queue awake!\n");
+ return NETDEV_TX_BUSY;
+ }
+
+ if (cf->can_id & CAN_EFF_FLAG)
+ reg_mid = (cf->can_id & CAN_EFF_MASK) | AT91_MID_MIDE;
+ else
+ reg_mid = (cf->can_id & CAN_SFF_MASK) << 18;
+
+ reg_mcr = ((cf->can_id & CAN_RTR_FLAG) ? AT91_MCR_MRTR : 0) |
+ (cf->can_dlc << 16) | AT91_MCR_MTCR;
+
+ /* disable MB while writing ID (see datasheet) */
+ set_mb_mode(priv, mb, AT91_MB_MODE_DISABLED);
+ at91_write(priv, AT91_MID(mb), reg_mid);
+ set_mb_mode_prio(priv, mb, AT91_MB_MODE_TX, prio);
+
+ at91_write(priv, AT91_MDL(mb), *(u32 *)(cf->data + 0));
+ at91_write(priv, AT91_MDH(mb), *(u32 *)(cf->data + 4));
+
+ /* This triggers transmission */
+ at91_write(priv, AT91_MCR(mb), reg_mcr);
+
+ stats->tx_bytes += cf->can_dlc;
+ dev->trans_start = jiffies;
+
+ /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+ can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST);
+
+ /*
+ * we have to stop the queue and deliver all messages in case
+ * of a prio+mb counter wrap around. This is the case if
+ * tx_next buffer prio and mailbox equals 0.
+ *
+ * also stop the queue if next buffer is still in use
+ * (== not ready)
+ */
+ priv->tx_next++;
+ if (!(at91_read(priv, AT91_MSR(get_tx_next_mb(priv))) &
+ AT91_MSR_MRDY) ||
+ (priv->tx_next & AT91_NEXT_MASK) == 0)
+ netif_stop_queue(dev);
+
+ /* Enable interrupt for this mailbox */
+ at91_write(priv, AT91_IER, 1 << mb);
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * at91_activate_rx_low - activate lower rx mailboxes
+ * @priv: a91 context
+ *
+ * Reenables the lower mailboxes for reception of new CAN messages
+ */
+static inline void at91_activate_rx_low(const struct at91_priv *priv)
+{
+ u32 mask = AT91_MB_RX_LOW_MASK;
+ at91_write(priv, AT91_TCR, mask);
+}
+
+/**
+ * at91_activate_rx_mb - reactive single rx mailbox
+ * @priv: a91 context
+ * @mb: mailbox to reactivate
+ *
+ * Reenables given mailbox for reception of new CAN messages
+ */
+static inline void at91_activate_rx_mb(const struct at91_priv *priv,
+ unsigned int mb)
+{
+ u32 mask = 1 << mb;
+ at91_write(priv, AT91_TCR, mask);
+}
+
+/**
+ * at91_rx_overflow_err - send error frame due to rx overflow
+ * @dev: net device
+ */
+static void at91_rx_overflow_err(struct net_device *dev)
+{
+ struct net_device_stats *stats = &dev->stats;
+ struct sk_buff *skb;
+ struct can_frame *cf;
+
+ dev_dbg(dev->dev.parent, "RX buffer overflow\n");
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return;
+
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+ netif_receive_skb(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+/**
+ * at91_read_mb - read CAN msg from mailbox (lowlevel impl)
+ * @dev: net device
+ * @mb: mailbox number to read from
+ * @cf: can frame where to store message
+ *
+ * Reads a CAN message from the given mailbox and stores data into
+ * given can frame. "mb" and "cf" must be valid.
+ */
+static void at91_read_mb(struct net_device *dev, unsigned int mb,
+ struct can_frame *cf)
+{
+ const struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_msr, reg_mid;
+
+ reg_mid = at91_read(priv, AT91_MID(mb));
+ if (reg_mid & AT91_MID_MIDE)
+ cf->can_id = ((reg_mid >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
+ else
+ cf->can_id = (reg_mid >> 18) & CAN_SFF_MASK;
+
+ reg_msr = at91_read(priv, AT91_MSR(mb));
+ if (reg_msr & AT91_MSR_MRTR)
+ cf->can_id |= CAN_RTR_FLAG;
+ cf->can_dlc = min_t(__u8, (reg_msr >> 16) & 0xf, 8);
+
+ *(u32 *)(cf->data + 0) = at91_read(priv, AT91_MDL(mb));
+ *(u32 *)(cf->data + 4) = at91_read(priv, AT91_MDH(mb));
+
+ if (unlikely(mb == AT91_MB_RX_LAST && reg_msr & AT91_MSR_MMI))
+ at91_rx_overflow_err(dev);
+}
+
+/**
+ * at91_read_msg - read CAN message from mailbox
+ * @dev: net device
+ * @mb: mail box to read from
+ *
+ * Reads a CAN message from given mailbox, and put into linux network
+ * RX queue, does all housekeeping chores (stats, ...)
+ */
+static void at91_read_msg(struct net_device *dev, unsigned int mb)
+{
+ struct net_device_stats *stats = &dev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ skb = alloc_can_skb(dev, &cf);
+ if (unlikely(!skb)) {
+ stats->rx_dropped++;
+ return;
+ }
+
+ at91_read_mb(dev, mb, cf);
+ netif_receive_skb(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+/**
+ * at91_poll_rx - read multiple CAN messages from mailboxes
+ * @dev: net device
+ * @quota: max number of pkgs we're allowed to receive
+ *
+ * Theory of Operation:
+ *
+ * 12 of the 16 mailboxes on the chip are reserved for RX. we split
+ * them into 2 groups. The lower group holds 8 and upper 4 mailboxes.
+ *
+ * Like it or not, but the chip always saves a received CAN message
+ * into the first free mailbox it finds (starting with the
+ * lowest). This makes it very difficult to read the messages in the
+ * right order from the chip. This is how we work around that problem:
+ *
+ * The first message goes into mb nr. 0 and issues an interrupt. All
+ * rx ints are disabled in the interrupt handler and a napi poll is
+ * scheduled. We read the mailbox, but do _not_ reenable the mb (to
+ * receive another message).
+ *
+ * lower mbxs upper
+ * ______^______ __^__
+ * / \ / \
+ * +-+-+-+-+-+-+-+-++-+-+-+-+
+ * |x|x|x|x|x|x|x|x|| | | | |
+ * +-+-+-+-+-+-+-+-++-+-+-+-+
+ * 0 0 0 0 0 0 0 0 0 0 1 1 \ mail
+ * 0 1 2 3 4 5 6 7 8 9 0 1 / box
+ *
+ * The variable priv->rx_next points to the next mailbox to read a
+ * message from. As long we're in the lower mailboxes we just read the
+ * mailbox but not reenable it.
+ *
+ * With completion of the last of the lower mailboxes, we reenable the
+ * whole first group, but continue to look for filled mailboxes in the
+ * upper mailboxes. Imagine the second group like overflow mailboxes,
+ * which takes CAN messages if the lower goup is full. While in the
+ * upper group we reenable the mailbox right after reading it. Giving
+ * the chip more room to store messages.
+ *
+ * After finishing we look again in the lower group if we've still
+ * quota.
+ *
+ */
+static int at91_poll_rx(struct net_device *dev, int quota)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_sr = at91_read(priv, AT91_SR);
+ const unsigned long *addr = (unsigned long *)®_sr;
+ unsigned int mb;
+ int received = 0;
+
+ if (priv->rx_next > AT91_MB_RX_LOW_LAST &&
+ reg_sr & AT91_MB_RX_LOW_MASK)
+ dev_info(dev->dev.parent,
+ "order of incoming frames cannot be guaranteed\n");
+
+ again:
+ for (mb = find_next_bit(addr, AT91_MB_RX_NUM, priv->rx_next);
+ mb < AT91_MB_RX_NUM && quota > 0;
+ reg_sr = at91_read(priv, AT91_SR),
+ mb = find_next_bit(addr, AT91_MB_RX_NUM, ++priv->rx_next)) {
+ at91_read_msg(dev, mb);
+
+ /* reactivate mailboxes */
+ if (mb == AT91_MB_RX_LOW_LAST)
+ /* all lower mailboxed, if just finished it */
+ at91_activate_rx_low(priv);
+ else if (mb > AT91_MB_RX_LOW_LAST)
+ /* only the mailbox we read */
+ at91_activate_rx_mb(priv, mb);
+
+ received++;
+ quota--;
+ }
+
+ /* upper group completed, look again in lower */
+ if (priv->rx_next > AT91_MB_RX_LOW_LAST &&
+ quota > 0 && mb >= AT91_MB_RX_NUM) {
+ priv->rx_next = 0;
+ goto again;
+ }
+
+ return received;
+}
+
+static void at91_poll_err_frame(struct net_device *dev,
+ struct can_frame *cf, u32 reg_sr)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+
+ /* CRC error */
+ if (reg_sr & AT91_IRQ_CERR) {
+ dev_dbg(dev->dev.parent, "CERR irq\n");
+ dev->stats.rx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ }
+
+ /* Stuffing Error */
+ if (reg_sr & AT91_IRQ_SERR) {
+ dev_dbg(dev->dev.parent, "SERR irq\n");
+ dev->stats.rx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ }
+
+ /* Acknowledgement Error */
+ if (reg_sr & AT91_IRQ_AERR) {
+ dev_dbg(dev->dev.parent, "AERR irq\n");
+ dev->stats.tx_errors++;
+ cf->can_id |= CAN_ERR_ACK;
+ }
+
+ /* Form error */
+ if (reg_sr & AT91_IRQ_FERR) {
+ dev_dbg(dev->dev.parent, "FERR irq\n");
+ dev->stats.rx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ }
+
+ /* Bit Error */
+ if (reg_sr & AT91_IRQ_BERR) {
+ dev_dbg(dev->dev.parent, "BERR irq\n");
+ dev->stats.tx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ cf->data[2] |= CAN_ERR_PROT_BIT;
+ }
+}
+
+static int at91_poll_err(struct net_device *dev, int quota, u32 reg_sr)
+{
+ struct sk_buff *skb;
+ struct can_frame *cf;
+
+ if (quota == 0)
+ return 0;
+
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return 0;
+
+ at91_poll_err_frame(dev, cf, reg_sr);
+ netif_receive_skb(skb);
+
+ dev->last_rx = jiffies;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += cf->can_dlc;
+
+ return 1;
+}
+
+static int at91_poll(struct napi_struct *napi, int quota)
+{
+ struct net_device *dev = napi->dev;
+ const struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_sr = at91_read(priv, AT91_SR);
+ int work_done = 0;
+
+ if (reg_sr & AT91_IRQ_MB_RX)
+ work_done += at91_poll_rx(dev, quota - work_done);
+
+ /*
+ * The error bits are clear on read,
+ * so use saved value from irq handler.
+ */
+ reg_sr |= priv->reg_sr;
+ if (reg_sr & AT91_IRQ_ERR_FRAME)
+ work_done += at91_poll_err(dev, quota - work_done, reg_sr);
+
+ if (work_done < quota) {
+ /* enable IRQs for frame errors and all mailboxes >= rx_next */
+ u32 reg_ier = AT91_IRQ_ERR_FRAME;
+ reg_ier |= AT91_IRQ_MB_RX & ~AT91_MB_RX_MASK(priv->rx_next);
+
+ napi_complete(napi);
+ at91_write(priv, AT91_IER, reg_ier);
+ }
+
+ return work_done;
+}
+
+/*
+ * theory of operation:
+ *
+ * priv->tx_echo holds the number of the oldest can_frame put for
+ * transmission into the hardware, but not yet ACKed by the CAN tx
+ * complete IRQ.
+ *
+ * We iterate from priv->tx_echo to priv->tx_next and check if the
+ * packet has been transmitted, echo it back to the CAN framework. If
+ * we discover a not yet transmitted package, stop looking for more.
+ *
+ */
+static void at91_irq_tx(struct net_device *dev, u32 reg_sr)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_msr;
+ unsigned int mb;
+
+ /* masking of reg_sr not needed, already done by at91_irq */
+
+ for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
+ mb = get_tx_echo_mb(priv);
+
+ /* no event in mailbox? */
+ if (!(reg_sr & (1 << mb)))
+ break;
+
+ /* Disable irq for this TX mailbox */
+ at91_write(priv, AT91_IDR, 1 << mb);
+
+ /*
+ * only echo if mailbox signals us a transfer
+ * complete (MSR_MRDY). Otherwise it's a tansfer
+ * abort. "can_bus_off()" takes care about the skbs
+ * parked in the echo queue.
+ */
+ reg_msr = at91_read(priv, AT91_MSR(mb));
+ if (likely(reg_msr & AT91_MSR_MRDY &&
+ ~reg_msr & AT91_MSR_MABT)) {
+ /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+ can_get_echo_skb(dev, mb - AT91_MB_TX_FIRST);
+ dev->stats.tx_packets++;
+ }
+ }
+
+ /*
+ * restart queue if we don't have a wrap around but restart if
+ * we get a TX int for the last can frame directly before a
+ * wrap around.
+ */
+ if ((priv->tx_next & AT91_NEXT_MASK) != 0 ||
+ (priv->tx_echo & AT91_NEXT_MASK) == 0)
+ netif_wake_queue(dev);
+}
+
+static void at91_irq_err_state(struct net_device *dev,
+ struct can_frame *cf, enum can_state new_state)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_idr, reg_ier, reg_ecr;
+ u8 tec, rec;
+
+ reg_ecr = at91_read(priv, AT91_ECR);
+ rec = reg_ecr & 0xff;
+ tec = reg_ecr >> 16;
+
+ switch (priv->can.state) {
+ case CAN_STATE_ERROR_ACTIVE:
+ /*
+ * from: ERROR_ACTIVE
+ * to : ERROR_WARNING, ERROR_PASSIVE, BUS_OFF
+ * => : there was a warning int
+ */
+ if (new_state >= CAN_STATE_ERROR_WARNING &&
+ new_state <= CAN_STATE_BUS_OFF) {
+ dev_dbg(dev->dev.parent, "Error Warning IRQ\n");
+ priv->can.can_stats.error_warning++;
+
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (tec > rec) ?
+ CAN_ERR_CRTL_TX_WARNING :
+ CAN_ERR_CRTL_RX_WARNING;
+ }
+ case CAN_STATE_ERROR_WARNING: /* fallthrough */
+ /*
+ * from: ERROR_ACTIVE, ERROR_WARNING
+ * to : ERROR_PASSIVE, BUS_OFF
+ * => : error passive int
+ */
+ if (new_state >= CAN_STATE_ERROR_PASSIVE &&
+ new_state <= CAN_STATE_BUS_OFF) {
+ dev_dbg(dev->dev.parent, "Error Passive IRQ\n");
+ priv->can.can_stats.error_passive++;
+
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (tec > rec) ?
+ CAN_ERR_CRTL_TX_PASSIVE :
+ CAN_ERR_CRTL_RX_PASSIVE;
+ }
+ break;
+ case CAN_STATE_BUS_OFF:
+ /*
+ * from: BUS_OFF
+ * to : ERROR_ACTIVE, ERROR_WARNING, ERROR_PASSIVE
+ */
+ if (new_state <= CAN_STATE_ERROR_PASSIVE) {
+ cf->can_id |= CAN_ERR_RESTARTED;
+
+ dev_dbg(dev->dev.parent, "restarted\n");
+ priv->can.can_stats.restarts++;
+
+ netif_carrier_on(dev);
+ netif_wake_queue(dev);
+ }
+ break;
+ default:
+ break;
+ }
+
+
+ /* process state changes depending on the new state */
+ switch (new_state) {
+ case CAN_STATE_ERROR_ACTIVE:
+ /*
+ * actually we want to enable AT91_IRQ_WARN here, but
+ * it screws up the system under certain
+ * circumstances. so just enable AT91_IRQ_ERRP, thus
+ * the "fallthrough"
+ */
+ dev_dbg(dev->dev.parent, "Error Active\n");
+ cf->can_id |= CAN_ERR_PROT;
+ cf->data[2] = CAN_ERR_PROT_ACTIVE;
+ case CAN_STATE_ERROR_WARNING: /* fallthrough */
+ reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_BOFF;
+ reg_ier = AT91_IRQ_ERRP;
+ break;
+ case CAN_STATE_ERROR_PASSIVE:
+ reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_ERRP;
+ reg_ier = AT91_IRQ_BOFF;
+ break;
+ case CAN_STATE_BUS_OFF:
+ reg_idr = AT91_IRQ_ERRA | AT91_IRQ_ERRP |
+ AT91_IRQ_WARN | AT91_IRQ_BOFF;
+ reg_ier = 0;
+
+ cf->can_id |= CAN_ERR_BUSOFF;
+
+ dev_dbg(dev->dev.parent, "bus-off\n");
+ netif_carrier_off(dev);
+ priv->can.can_stats.bus_off++;
+
+ /* turn off chip, if restart is disabled */
+ if (!priv->can.restart_ms) {
+ at91_chip_stop(dev, CAN_STATE_BUS_OFF);
+ return;
+ }
+ break;
+ default:
+ break;
+ }
+
+ at91_write(priv, AT91_IDR, reg_idr);
+ at91_write(priv, AT91_IER, reg_ier);
+}
+
+static void at91_irq_err(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb;
+ struct can_frame *cf;
+ enum can_state new_state;
+ u32 reg_sr;
+
+ reg_sr = at91_read(priv, AT91_SR);
+
+ /* we need to look at the unmasked reg_sr */
+ if (unlikely(reg_sr & AT91_IRQ_BOFF))
+ new_state = CAN_STATE_BUS_OFF;
+ else if (unlikely(reg_sr & AT91_IRQ_ERRP))
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ else if (unlikely(reg_sr & AT91_IRQ_WARN))
+ new_state = CAN_STATE_ERROR_WARNING;
+ else if (likely(reg_sr & AT91_IRQ_ERRA))
+ new_state = CAN_STATE_ERROR_ACTIVE;
+ else {
+ dev_err(dev->dev.parent, "BUG! hardware in undefined state\n");
+ return;
+ }
+
+ /* state hasn't changed */
+ if (likely(new_state == priv->can.state))
+ return;
+
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return;
+
+ at91_irq_err_state(dev, cf, new_state);
+ netif_rx(skb);
+
+ dev->last_rx = jiffies;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += cf->can_dlc;
+
+ priv->can.state = new_state;
+}
+
+/*
+ * interrupt handler
+ */
+static irqreturn_t at91_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct at91_priv *priv = netdev_priv(dev);
+ irqreturn_t handled = IRQ_NONE;
+ u32 reg_sr, reg_imr;
+
+ reg_sr = at91_read(priv, AT91_SR);
+ reg_imr = at91_read(priv, AT91_IMR);
+
+ /* Ignore masked interrupts */
+ reg_sr &= reg_imr;
+ if (!reg_sr)
+ goto exit;
+
+ handled = IRQ_HANDLED;
+
+ /* Receive or error interrupt? -> napi */
+ if (reg_sr & (AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME)) {
+ /*
+ * The error bits are clear on read,
+ * save for later use.
+ */
+ priv->reg_sr = reg_sr;
+ at91_write(priv, AT91_IDR,
+ AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME);
+ napi_schedule(&priv->napi);
+ }
+
+ /* Transmission complete interrupt */
+ if (reg_sr & AT91_IRQ_MB_TX)
+ at91_irq_tx(dev, reg_sr);
+
+ at91_irq_err(dev);
+
+ exit:
+ return handled;
+}
+
+static int at91_open(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ int err;
+
+ clk_enable(priv->clk);
+
+ /* check or determine and set bittime */
+ err = open_candev(dev);
+ if (err)
+ goto out;
+
+ /* register interrupt handler */
+ if (request_irq(dev->irq, at91_irq, IRQF_SHARED,
+ dev->name, dev)) {
+ err = -EAGAIN;
+ goto out_close;
+ }
+
+ /* start chip and queuing */
+ at91_chip_start(dev);
+ napi_enable(&priv->napi);
+ netif_start_queue(dev);
+
+ return 0;
+
+ out_close:
+ close_candev(dev);
+ out:
+ clk_disable(priv->clk);
+
+ return err;
+}
+
+/*
+ * stop CAN bus activity
+ */
+static int at91_close(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ napi_disable(&priv->napi);
+ at91_chip_stop(dev, CAN_STATE_STOPPED);
+
+ free_irq(dev->irq, dev);
+ clk_disable(priv->clk);
+
+ close_candev(dev);
+
+ return 0;
+}
+
+static int at91_set_mode(struct net_device *dev, enum can_mode mode)
+{
+ switch (mode) {
+ case CAN_MODE_START:
+ at91_chip_start(dev);
+ netif_wake_queue(dev);
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static const struct net_device_ops at91_netdev_ops = {
+ .ndo_open = at91_open,
+ .ndo_stop = at91_close,
+ .ndo_start_xmit = at91_start_xmit,
+};
+
+static int __init at91_can_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct at91_priv *priv;
+ struct resource *res;
+ struct clk *clk;
+ void __iomem *addr;
+ int err, irq;
+
+ clk = clk_get(&pdev->dev, "can_clk");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "no clock defined\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!res || !irq) {
+ err = -ENODEV;
+ goto exit_put;
+ }
+
+ if (!request_mem_region(res->start,
+ resource_size(res),
+ pdev->name)) {
+ err = -EBUSY;
+ goto exit_put;
+ }
+
+ addr = ioremap_nocache(res->start, resource_size(res));
+ if (!addr) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+
+ dev = alloc_candev(sizeof(struct at91_priv));
+ if (!dev) {
+ err = -ENOMEM;
+ goto exit_iounmap;
+ }
+
+ dev->netdev_ops = &at91_netdev_ops;
+ dev->irq = irq;
+ dev->flags |= IFF_ECHO;
+
+ priv = netdev_priv(dev);
+ priv->can.clock.freq = clk_get_rate(clk);
+ priv->can.bittiming_const = &at91_bittiming_const;
+ priv->can.do_set_bittiming = at91_set_bittiming;
+ priv->can.do_set_mode = at91_set_mode;
+ priv->reg_base = addr;
+ priv->dev = dev;
+ priv->clk = clk;
+ priv->pdata = pdev->dev.platform_data;
+
+ netif_napi_add(dev, &priv->napi, at91_poll, AT91_NAPI_WEIGHT);
+
+ dev_set_drvdata(&pdev->dev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ err = register_candev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "registering netdev failed\n");
+ goto exit_free;
+ }
+
+ dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
+ priv->reg_base, dev->irq);
+
+ return 0;
+
+ exit_free:
+ free_netdev(dev);
+ exit_iounmap:
+ iounmap(addr);
+ exit_release:
+ release_mem_region(res->start, resource_size(res));
+ exit_put:
+ clk_put(clk);
+ exit:
+ return err;
+}
+
+static int __devexit at91_can_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct at91_priv *priv = netdev_priv(dev);
+ struct resource *res;
+
+ unregister_netdev(dev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ free_netdev(dev);
+
+ iounmap(priv->reg_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ clk_put(priv->clk);
+
+ return 0;
+}
+
+static struct platform_driver at91_can_driver = {
+ .probe = at91_can_probe,
+ .remove = __devexit_p(at91_can_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_can_module_init(void)
+{
+ printk(KERN_INFO "%s netdevice driver\n", DRV_NAME);
+ return platform_driver_register(&at91_can_driver);
+}
+
+static void __exit at91_can_module_exit(void)
+{
+ platform_driver_unregister(&at91_can_driver);
+ printk(KERN_INFO "%s: driver removed\n", DRV_NAME);
+}
+
+module_init(at91_can_module_init);
+module_exit(at91_can_module_exit);
+
+MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION(DRV_NAME " CAN netdevice driver");
#define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK)
#define EMS_PCI_V1_BASE_BAR 1
-#define EMS_PCI_V1_MEM_SIZE 4096
+#define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */
#define EMS_PCI_V2_BASE_BAR 2
-#define EMS_PCI_V2_MEM_SIZE 128
+#define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */
#define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */
#define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */
+#define EMS_PCI_BASE_SIZE 4096 /* size of controller area */
+
static struct pci_device_id ems_pci_tbl[] = {
/* CPC-PCI v1 */
{PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,},
struct sja1000_priv *priv;
struct net_device *dev;
struct ems_pci_card *card;
- int max_chan, mem_size, base_bar;
+ int max_chan, conf_size, base_bar;
int err, i;
/* Enabling PCI device */
card->version = 2; /* CPC-PCI v2 */
max_chan = EMS_PCI_V2_MAX_CHAN;
base_bar = EMS_PCI_V2_BASE_BAR;
- mem_size = EMS_PCI_V2_MEM_SIZE;
+ conf_size = EMS_PCI_V2_CONF_SIZE;
} else {
card->version = 1; /* CPC-PCI v1 */
max_chan = EMS_PCI_V1_MAX_CHAN;
base_bar = EMS_PCI_V1_BASE_BAR;
- mem_size = EMS_PCI_V1_MEM_SIZE;
+ conf_size = EMS_PCI_V1_CONF_SIZE;
}
/* Remap configuration space and controller memory area */
- card->conf_addr = pci_iomap(pdev, 0, mem_size);
+ card->conf_addr = pci_iomap(pdev, 0, conf_size);
if (card->conf_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
}
- card->base_addr = pci_iomap(pdev, base_bar, mem_size);
+ card->base_addr = pci_iomap(pdev, base_bar, EMS_PCI_BASE_SIZE);
if (card->base_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
--- /dev/null
+#
+# Makefile for the Linux Controller Area Network USB drivers.
+#
+
+obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
--- /dev/null
+/*
+ * CAN driver for EMS Dr. Thomas Wuensche CPC-USB/ARM7
+ *
+ * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+MODULE_AUTHOR("Sebastian Haas <haas@ems-wuensche.com>");
+MODULE_DESCRIPTION("CAN driver for EMS Dr. Thomas Wuensche CAN/USB interfaces");
+MODULE_LICENSE("GPL v2");
+
+/* Control-Values for CPC_Control() Command Subject Selection */
+#define CONTR_CAN_MESSAGE 0x04
+#define CONTR_CAN_STATE 0x0C
+#define CONTR_BUS_ERROR 0x1C
+
+/* Control Command Actions */
+#define CONTR_CONT_OFF 0
+#define CONTR_CONT_ON 1
+#define CONTR_ONCE 2
+
+/* Messages from CPC to PC */
+#define CPC_MSG_TYPE_CAN_FRAME 1 /* CAN data frame */
+#define CPC_MSG_TYPE_RTR_FRAME 8 /* CAN remote frame */
+#define CPC_MSG_TYPE_CAN_PARAMS 12 /* Actual CAN parameters */
+#define CPC_MSG_TYPE_CAN_STATE 14 /* CAN state message */
+#define CPC_MSG_TYPE_EXT_CAN_FRAME 16 /* Extended CAN data frame */
+#define CPC_MSG_TYPE_EXT_RTR_FRAME 17 /* Extended remote frame */
+#define CPC_MSG_TYPE_CONTROL 19 /* change interface behavior */
+#define CPC_MSG_TYPE_CONFIRM 20 /* command processed confirmation */
+#define CPC_MSG_TYPE_OVERRUN 21 /* overrun events */
+#define CPC_MSG_TYPE_CAN_FRAME_ERROR 23 /* detected bus errors */
+#define CPC_MSG_TYPE_ERR_COUNTER 25 /* RX/TX error counter */
+
+/* Messages from the PC to the CPC interface */
+#define CPC_CMD_TYPE_CAN_FRAME 1 /* CAN data frame */
+#define CPC_CMD_TYPE_CONTROL 3 /* control of interface behavior */
+#define CPC_CMD_TYPE_CAN_PARAMS 6 /* set CAN parameters */
+#define CPC_CMD_TYPE_RTR_FRAME 13 /* CAN remote frame */
+#define CPC_CMD_TYPE_CAN_STATE 14 /* CAN state message */
+#define CPC_CMD_TYPE_EXT_CAN_FRAME 15 /* Extended CAN data frame */
+#define CPC_CMD_TYPE_EXT_RTR_FRAME 16 /* Extended CAN remote frame */
+#define CPC_CMD_TYPE_CAN_EXIT 200 /* exit the CAN */
+
+#define CPC_CMD_TYPE_INQ_ERR_COUNTER 25 /* request the CAN error counters */
+#define CPC_CMD_TYPE_CLEAR_MSG_QUEUE 8 /* clear CPC_MSG queue */
+#define CPC_CMD_TYPE_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
+
+#define CPC_CC_TYPE_SJA1000 2 /* Philips basic CAN controller */
+
+#define CPC_CAN_ECODE_ERRFRAME 0x01 /* Ecode type */
+
+/* Overrun types */
+#define CPC_OVR_EVENT_CAN 0x01
+#define CPC_OVR_EVENT_CANSTATE 0x02
+#define CPC_OVR_EVENT_BUSERROR 0x04
+
+/*
+ * If the CAN controller lost a message we indicate it with the highest bit
+ * set in the count field.
+ */
+#define CPC_OVR_HW 0x80
+
+/* Size of the "struct ems_cpc_msg" without the union */
+#define CPC_MSG_HEADER_LEN 11
+#define CPC_CAN_MSG_MIN_SIZE 5
+
+/* Define these values to match your devices */
+#define USB_CPCUSB_VENDOR_ID 0x12D6
+
+#define USB_CPCUSB_ARM7_PRODUCT_ID 0x0444
+
+/* Mode register NXP LPC2119/SJA1000 CAN Controller */
+#define SJA1000_MOD_NORMAL 0x00
+#define SJA1000_MOD_RM 0x01
+
+/* ECC register NXP LPC2119/SJA1000 CAN Controller */
+#define SJA1000_ECC_SEG 0x1F
+#define SJA1000_ECC_DIR 0x20
+#define SJA1000_ECC_ERR 0x06
+#define SJA1000_ECC_BIT 0x00
+#define SJA1000_ECC_FORM 0x40
+#define SJA1000_ECC_STUFF 0x80
+#define SJA1000_ECC_MASK 0xc0
+
+/* Status register content */
+#define SJA1000_SR_BS 0x80
+#define SJA1000_SR_ES 0x40
+
+#define SJA1000_DEFAULT_OUTPUT_CONTROL 0xDA
+
+/*
+ * The device actually uses a 16MHz clock to generate the CAN clock
+ * but it expects SJA1000 bit settings based on 8MHz (is internally
+ * converted).
+ */
+#define EMS_USB_ARM7_CLOCK 8000000
+
+/*
+ * CAN-Message representation in a CPC_MSG. Message object type is
+ * CPC_MSG_TYPE_CAN_FRAME or CPC_MSG_TYPE_RTR_FRAME or
+ * CPC_MSG_TYPE_EXT_CAN_FRAME or CPC_MSG_TYPE_EXT_RTR_FRAME.
+ */
+struct cpc_can_msg {
+ u32 id;
+ u8 length;
+ u8 msg[8];
+};
+
+/* Representation of the CAN parameters for the SJA1000 controller */
+struct cpc_sja1000_params {
+ u8 mode;
+ u8 acc_code0;
+ u8 acc_code1;
+ u8 acc_code2;
+ u8 acc_code3;
+ u8 acc_mask0;
+ u8 acc_mask1;
+ u8 acc_mask2;
+ u8 acc_mask3;
+ u8 btr0;
+ u8 btr1;
+ u8 outp_contr;
+};
+
+/* CAN params message representation */
+struct cpc_can_params {
+ u8 cc_type;
+
+ /* Will support M16C CAN controller in the future */
+ union {
+ struct cpc_sja1000_params sja1000;
+ } cc_params;
+};
+
+/* Structure for confirmed message handling */
+struct cpc_confirm {
+ u8 error; /* error code */
+};
+
+/* Structure for overrun conditions */
+struct cpc_overrun {
+ u8 event;
+ u8 count;
+};
+
+/* SJA1000 CAN errors (compatible to NXP LPC2119) */
+struct cpc_sja1000_can_error {
+ u8 ecc;
+ u8 rxerr;
+ u8 txerr;
+};
+
+/* structure for CAN error conditions */
+struct cpc_can_error {
+ u8 ecode;
+
+ struct {
+ u8 cc_type;
+
+ /* Other controllers may also provide error code capture regs */
+ union {
+ struct cpc_sja1000_can_error sja1000;
+ } regs;
+ } cc;
+};
+
+/*
+ * Structure containing RX/TX error counter. This structure is used to request
+ * the values of the CAN controllers TX and RX error counter.
+ */
+struct cpc_can_err_counter {
+ u8 rx;
+ u8 tx;
+};
+
+/* Main message type used between library and application */
+struct __attribute__ ((packed)) ems_cpc_msg {
+ u8 type; /* type of message */
+ u8 length; /* length of data within union 'msg' */
+ u8 msgid; /* confirmation handle */
+ u32 ts_sec; /* timestamp in seconds */
+ u32 ts_nsec; /* timestamp in nano seconds */
+
+ union {
+ u8 generic[64];
+ struct cpc_can_msg can_msg;
+ struct cpc_can_params can_params;
+ struct cpc_confirm confirmation;
+ struct cpc_overrun overrun;
+ struct cpc_can_error error;
+ struct cpc_can_err_counter err_counter;
+ u8 can_state;
+ } msg;
+};
+
+/*
+ * Table of devices that work with this driver
+ * NOTE: This driver supports only CPC-USB/ARM7 (LPC2119) yet.
+ */
+static struct usb_device_id ems_usb_table[] = {
+ {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_ARM7_PRODUCT_ID)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ems_usb_table);
+
+#define RX_BUFFER_SIZE 64
+#define CPC_HEADER_SIZE 4
+#define INTR_IN_BUFFER_SIZE 4
+
+#define MAX_RX_URBS 10
+#define MAX_TX_URBS CAN_ECHO_SKB_MAX
+
+struct ems_usb;
+
+struct ems_tx_urb_context {
+ struct ems_usb *dev;
+
+ u32 echo_index;
+ u8 dlc;
+};
+
+struct ems_usb {
+ struct can_priv can; /* must be the first member */
+ int open_time;
+
+ struct sk_buff *echo_skb[MAX_TX_URBS];
+
+ struct usb_device *udev;
+ struct net_device *netdev;
+
+ atomic_t active_tx_urbs;
+ struct usb_anchor tx_submitted;
+ struct ems_tx_urb_context tx_contexts[MAX_TX_URBS];
+
+ struct usb_anchor rx_submitted;
+
+ struct urb *intr_urb;
+
+ u8 *tx_msg_buffer;
+
+ u8 *intr_in_buffer;
+ unsigned int free_slots; /* remember number of available slots */
+
+ struct ems_cpc_msg active_params; /* active controller parameters */
+};
+
+static void ems_usb_read_interrupt_callback(struct urb *urb)
+{
+ struct ems_usb *dev = urb->context;
+ struct net_device *netdev = dev->netdev;
+ int err;
+
+ if (!netif_device_present(netdev))
+ return;
+
+ switch (urb->status) {
+ case 0:
+ dev->free_slots = dev->intr_in_buffer[1];
+ break;
+
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ dev_info(netdev->dev.parent, "Rx interrupt aborted %d\n",
+ urb->status);
+ break;
+ }
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (err == -ENODEV)
+ netif_device_detach(netdev);
+ else if (err)
+ dev_err(netdev->dev.parent,
+ "failed resubmitting intr urb: %d\n", err);
+
+ return;
+}
+
+static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ int i;
+ struct net_device_stats *stats = &dev->netdev->stats;
+
+ skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ if (skb == NULL)
+ return;
+
+ skb->protocol = htons(ETH_P_CAN);
+
+ cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+
+ cf->can_id = msg->msg.can_msg.id;
+ cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
+
+ if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME
+ || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME)
+ cf->can_id |= CAN_EFF_FLAG;
+
+ if (msg->type == CPC_MSG_TYPE_RTR_FRAME
+ || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) {
+ cf->can_id |= CAN_RTR_FLAG;
+ } else {
+ for (i = 0; i < cf->can_dlc; i++)
+ cf->data[i] = msg->msg.can_msg.msg[i];
+ }
+
+ netif_rx(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ struct net_device_stats *stats = &dev->netdev->stats;
+
+ skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ if (skb == NULL)
+ return;
+
+ skb->protocol = htons(ETH_P_CAN);
+
+ cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+ memset(cf, 0, sizeof(struct can_frame));
+
+ cf->can_id = CAN_ERR_FLAG;
+ cf->can_dlc = CAN_ERR_DLC;
+
+ if (msg->type == CPC_MSG_TYPE_CAN_STATE) {
+ u8 state = msg->msg.can_state;
+
+ if (state & SJA1000_SR_BS) {
+ dev->can.state = CAN_STATE_BUS_OFF;
+ cf->can_id |= CAN_ERR_BUSOFF;
+
+ can_bus_off(dev->netdev);
+ } else if (state & SJA1000_SR_ES) {
+ dev->can.state = CAN_STATE_ERROR_WARNING;
+ dev->can.can_stats.error_warning++;
+ } else {
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+ dev->can.can_stats.error_passive++;
+ }
+ } else if (msg->type == CPC_MSG_TYPE_CAN_FRAME_ERROR) {
+ u8 ecc = msg->msg.error.cc.regs.sja1000.ecc;
+ u8 txerr = msg->msg.error.cc.regs.sja1000.txerr;
+ u8 rxerr = msg->msg.error.cc.regs.sja1000.rxerr;
+
+ /* bus error interrupt */
+ dev->can.can_stats.bus_error++;
+ stats->rx_errors++;
+
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+ switch (ecc & SJA1000_ECC_MASK) {
+ case SJA1000_ECC_BIT:
+ cf->data[2] |= CAN_ERR_PROT_BIT;
+ break;
+ case SJA1000_ECC_FORM:
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ break;
+ case SJA1000_ECC_STUFF:
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ break;
+ default:
+ cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+ cf->data[3] = ecc & SJA1000_ECC_SEG;
+ break;
+ }
+
+ /* Error occured during transmission? */
+ if ((ecc & SJA1000_ECC_DIR) == 0)
+ cf->data[2] |= CAN_ERR_PROT_TX;
+
+ if (dev->can.state == CAN_STATE_ERROR_WARNING ||
+ dev->can.state == CAN_STATE_ERROR_PASSIVE) {
+ cf->data[1] = (txerr > rxerr) ?
+ CAN_ERR_CRTL_TX_PASSIVE : CAN_ERR_CRTL_RX_PASSIVE;
+ }
+ } else if (msg->type == CPC_MSG_TYPE_OVERRUN) {
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+ }
+
+ netif_rx(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void ems_usb_read_bulk_callback(struct urb *urb)
+{
+ struct ems_usb *dev = urb->context;
+ struct net_device *netdev;
+ int retval;
+
+ netdev = dev->netdev;
+
+ if (!netif_device_present(netdev))
+ return;
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+
+ case -ENOENT:
+ return;
+
+ default:
+ dev_info(netdev->dev.parent, "Rx URB aborted (%d)\n",
+ urb->status);
+ goto resubmit_urb;
+ }
+
+ if (urb->actual_length > CPC_HEADER_SIZE) {
+ struct ems_cpc_msg *msg;
+ u8 *ibuf = urb->transfer_buffer;
+ u8 msg_count, again, start;
+
+ msg_count = ibuf[0] & ~0x80;
+ again = ibuf[0] & 0x80;
+
+ start = CPC_HEADER_SIZE;
+
+ while (msg_count) {
+ msg = (struct ems_cpc_msg *)&ibuf[start];
+
+ switch (msg->type) {
+ case CPC_MSG_TYPE_CAN_STATE:
+ /* Process CAN state changes */
+ ems_usb_rx_err(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_CAN_FRAME:
+ case CPC_MSG_TYPE_EXT_CAN_FRAME:
+ case CPC_MSG_TYPE_RTR_FRAME:
+ case CPC_MSG_TYPE_EXT_RTR_FRAME:
+ ems_usb_rx_can_msg(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_CAN_FRAME_ERROR:
+ /* Process errorframe */
+ ems_usb_rx_err(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_OVERRUN:
+ /* Message lost while receiving */
+ ems_usb_rx_err(dev, msg);
+ break;
+ }
+
+ start += CPC_MSG_HEADER_LEN + msg->length;
+ msg_count--;
+
+ if (start > urb->transfer_buffer_length) {
+ dev_err(netdev->dev.parent, "format error\n");
+ break;
+ }
+ }
+ }
+
+resubmit_urb:
+ usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
+ urb->transfer_buffer, RX_BUFFER_SIZE,
+ ems_usb_read_bulk_callback, dev);
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (retval == -ENODEV)
+ netif_device_detach(netdev);
+ else if (retval)
+ dev_err(netdev->dev.parent,
+ "failed resubmitting read bulk urb: %d\n", retval);
+
+ return;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void ems_usb_write_bulk_callback(struct urb *urb)
+{
+ struct ems_tx_urb_context *context = urb->context;
+ struct ems_usb *dev;
+ struct net_device *netdev;
+
+ BUG_ON(!context);
+
+ dev = context->dev;
+ netdev = dev->netdev;
+
+ /* free up our allocated buffer */
+ usb_buffer_free(urb->dev, urb->transfer_buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ if (!netif_device_present(netdev))
+ return;
+
+ if (urb->status)
+ dev_info(netdev->dev.parent, "Tx URB aborted (%d)\n",
+ urb->status);
+
+ netdev->trans_start = jiffies;
+
+ /* transmission complete interrupt */
+ netdev->stats.tx_packets++;
+ netdev->stats.tx_bytes += context->dlc;
+
+ can_get_echo_skb(netdev, context->echo_index);
+
+ /* Release context */
+ context->echo_index = MAX_TX_URBS;
+
+ if (netif_queue_stopped(netdev))
+ netif_wake_queue(netdev);
+}
+
+/*
+ * Send the given CPC command synchronously
+ */
+static int ems_usb_command_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ int actual_length;
+
+ /* Copy payload */
+ memcpy(&dev->tx_msg_buffer[CPC_HEADER_SIZE], msg,
+ msg->length + CPC_MSG_HEADER_LEN);
+
+ /* Clear header */
+ memset(&dev->tx_msg_buffer[0], 0, CPC_HEADER_SIZE);
+
+ return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2),
+ &dev->tx_msg_buffer[0],
+ msg->length + CPC_MSG_HEADER_LEN + CPC_HEADER_SIZE,
+ &actual_length, 1000);
+}
+
+/*
+ * Change CAN controllers' mode register
+ */
+static int ems_usb_write_mode(struct ems_usb *dev, u8 mode)
+{
+ dev->active_params.msg.can_params.cc_params.sja1000.mode = mode;
+
+ return ems_usb_command_msg(dev, &dev->active_params);
+}
+
+/*
+ * Send a CPC_Control command to change behaviour when interface receives a CAN
+ * message, bus error or CAN state changed notifications.
+ */
+static int ems_usb_control_cmd(struct ems_usb *dev, u8 val)
+{
+ struct ems_cpc_msg cmd;
+
+ cmd.type = CPC_CMD_TYPE_CONTROL;
+ cmd.length = CPC_MSG_HEADER_LEN + 1;
+
+ cmd.msgid = 0;
+
+ cmd.msg.generic[0] = val;
+
+ return ems_usb_command_msg(dev, &cmd);
+}
+
+/*
+ * Start interface
+ */
+static int ems_usb_start(struct ems_usb *dev)
+{
+ struct net_device *netdev = dev->netdev;
+ int err, i;
+
+ dev->intr_in_buffer[0] = 0;
+ dev->free_slots = 15; /* initial size */
+
+ for (i = 0; i < MAX_RX_URBS; i++) {
+ struct urb *urb = NULL;
+ u8 *buf = NULL;
+
+ /* create a URB, and a buffer for it */
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ dev_err(netdev->dev.parent,
+ "No memory left for URBs\n");
+ return -ENOMEM;
+ }
+
+ buf = usb_buffer_alloc(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
+ &urb->transfer_dma);
+ if (!buf) {
+ dev_err(netdev->dev.parent,
+ "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
+ buf, RX_BUFFER_SIZE,
+ ems_usb_read_bulk_callback, dev);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usb_anchor_urb(urb, &dev->rx_submitted);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, RX_BUFFER_SIZE, buf,
+ urb->transfer_dma);
+ break;
+ }
+
+ /* Drop reference, USB core will take care of freeing it */
+ usb_free_urb(urb);
+ }
+
+ /* Did we submit any URBs */
+ if (i == 0) {
+ dev_warn(netdev->dev.parent, "couldn't setup read URBs\n");
+ return err;
+ }
+
+ /* Warn if we've couldn't transmit all the URBs */
+ if (i < MAX_RX_URBS)
+ dev_warn(netdev->dev.parent, "rx performance may be slow\n");
+
+ /* Setup and start interrupt URB */
+ usb_fill_int_urb(dev->intr_urb, dev->udev,
+ usb_rcvintpipe(dev->udev, 1),
+ dev->intr_in_buffer,
+ INTR_IN_BUFFER_SIZE,
+ ems_usb_read_interrupt_callback, dev, 1);
+
+ err = usb_submit_urb(dev->intr_urb, GFP_KERNEL);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "intr URB submit failed: %d\n",
+ err);
+
+ return err;
+ }
+
+ /* CPC-USB will transfer received message to host */
+ err = ems_usb_control_cmd(dev, CONTR_CAN_MESSAGE | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ /* CPC-USB will transfer CAN state changes to host */
+ err = ems_usb_control_cmd(dev, CONTR_CAN_STATE | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ /* CPC-USB will transfer bus errors to host */
+ err = ems_usb_control_cmd(dev, CONTR_BUS_ERROR | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ err = ems_usb_write_mode(dev, SJA1000_MOD_NORMAL);
+ if (err)
+ goto failed;
+
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ return 0;
+
+failed:
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "couldn't submit control: %d\n", err);
+
+ return err;
+}
+
+static void unlink_all_urbs(struct ems_usb *dev)
+{
+ int i;
+
+ usb_unlink_urb(dev->intr_urb);
+
+ usb_kill_anchored_urbs(&dev->rx_submitted);
+
+ usb_kill_anchored_urbs(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+
+ for (i = 0; i < MAX_TX_URBS; i++)
+ dev->tx_contexts[i].echo_index = MAX_TX_URBS;
+}
+
+static int ems_usb_open(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ int err;
+
+ err = ems_usb_write_mode(dev, SJA1000_MOD_RM);
+ if (err)
+ return err;
+
+ /* common open */
+ err = open_candev(netdev);
+ if (err)
+ return err;
+
+ /* finally start device */
+ err = ems_usb_start(dev);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "couldn't start device: %d\n",
+ err);
+
+ close_candev(netdev);
+
+ return err;
+ }
+
+ dev->open_time = jiffies;
+
+ netif_start_queue(netdev);
+
+ return 0;
+}
+
+static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ struct ems_tx_urb_context *context = NULL;
+ struct net_device_stats *stats = &netdev->stats;
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ struct ems_cpc_msg *msg;
+ struct urb *urb;
+ u8 *buf;
+ int i, err;
+ size_t size = CPC_HEADER_SIZE + CPC_MSG_HEADER_LEN
+ + sizeof(struct cpc_can_msg);
+
+ /* create a URB, and a buffer for it, and copy the data to the URB */
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_err(netdev->dev.parent, "No memory left for URBs\n");
+ goto nomem;
+ }
+
+ buf = usb_buffer_alloc(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
+ if (!buf) {
+ dev_err(netdev->dev.parent, "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ goto nomem;
+ }
+
+ msg = (struct ems_cpc_msg *)&buf[CPC_HEADER_SIZE];
+
+ msg->msg.can_msg.id = cf->can_id & CAN_ERR_MASK;
+ msg->msg.can_msg.length = cf->can_dlc;
+
+ if (cf->can_id & CAN_RTR_FLAG) {
+ msg->type = cf->can_id & CAN_EFF_FLAG ?
+ CPC_CMD_TYPE_EXT_RTR_FRAME : CPC_CMD_TYPE_RTR_FRAME;
+
+ msg->length = CPC_CAN_MSG_MIN_SIZE;
+ } else {
+ msg->type = cf->can_id & CAN_EFF_FLAG ?
+ CPC_CMD_TYPE_EXT_CAN_FRAME : CPC_CMD_TYPE_CAN_FRAME;
+
+ for (i = 0; i < cf->can_dlc; i++)
+ msg->msg.can_msg.msg[i] = cf->data[i];
+
+ msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc;
+ }
+
+ for (i = 0; i < MAX_TX_URBS; i++) {
+ if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) {
+ context = &dev->tx_contexts[i];
+ break;
+ }
+ }
+
+ /*
+ * May never happen! When this happens we'd more URBs in flight as
+ * allowed (MAX_TX_URBS).
+ */
+ if (!context) {
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+
+ dev_warn(netdev->dev.parent, "couldn't find free context\n");
+
+ return NETDEV_TX_BUSY;
+ }
+
+ context->dev = dev;
+ context->echo_index = i;
+ context->dlc = cf->can_dlc;
+
+ usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
+ size, ems_usb_write_bulk_callback, context);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usb_anchor_urb(urb, &dev->tx_submitted);
+
+ can_put_echo_skb(skb, netdev, context->echo_index);
+
+ atomic_inc(&dev->active_tx_urbs);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (unlikely(err)) {
+ can_free_echo_skb(netdev, context->echo_index);
+
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+ dev_kfree_skb(skb);
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ if (err == -ENODEV) {
+ netif_device_detach(netdev);
+ } else {
+ dev_warn(netdev->dev.parent, "failed tx_urb %d\n", err);
+
+ stats->tx_dropped++;
+ }
+ } else {
+ netdev->trans_start = jiffies;
+
+ /* Slow down tx path */
+ if (atomic_read(&dev->active_tx_urbs) >= MAX_TX_URBS ||
+ dev->free_slots < 5) {
+ netif_stop_queue(netdev);
+ }
+ }
+
+ /*
+ * Release our reference to this URB, the USB core will eventually free
+ * it entirely.
+ */
+ usb_free_urb(urb);
+
+ return NETDEV_TX_OK;
+
+nomem:
+ if (skb)
+ dev_kfree_skb(skb);
+
+ stats->tx_dropped++;
+
+ return NETDEV_TX_OK;
+}
+
+static int ems_usb_close(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+
+ /* Stop polling */
+ unlink_all_urbs(dev);
+
+ netif_stop_queue(netdev);
+
+ /* Set CAN controller to reset mode */
+ if (ems_usb_write_mode(dev, SJA1000_MOD_RM))
+ dev_warn(netdev->dev.parent, "couldn't stop device");
+
+ close_candev(netdev);
+
+ dev->open_time = 0;
+
+ return 0;
+}
+
+static const struct net_device_ops ems_usb_netdev_ops = {
+ .ndo_open = ems_usb_open,
+ .ndo_stop = ems_usb_close,
+ .ndo_start_xmit = ems_usb_start_xmit,
+};
+
+static struct can_bittiming_const ems_usb_bittiming_const = {
+ .name = "ems_usb",
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 64,
+ .brp_inc = 1,
+};
+
+static int ems_usb_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+
+ if (!dev->open_time)
+ return -EINVAL;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ if (ems_usb_write_mode(dev, SJA1000_MOD_NORMAL))
+ dev_warn(netdev->dev.parent, "couldn't start device");
+
+ if (netif_queue_stopped(netdev))
+ netif_wake_queue(netdev);
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int ems_usb_set_bittiming(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ struct can_bittiming *bt = &dev->can.bittiming;
+ u8 btr0, btr1;
+
+ btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+ btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+ (((bt->phase_seg2 - 1) & 0x7) << 4);
+ if (dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+ btr1 |= 0x80;
+
+ dev_info(netdev->dev.parent, "setting BTR0=0x%02x BTR1=0x%02x\n",
+ btr0, btr1);
+
+ dev->active_params.msg.can_params.cc_params.sja1000.btr0 = btr0;
+ dev->active_params.msg.can_params.cc_params.sja1000.btr1 = btr1;
+
+ return ems_usb_command_msg(dev, &dev->active_params);
+}
+
+static void init_params_sja1000(struct ems_cpc_msg *msg)
+{
+ struct cpc_sja1000_params *sja1000 =
+ &msg->msg.can_params.cc_params.sja1000;
+
+ msg->type = CPC_CMD_TYPE_CAN_PARAMS;
+ msg->length = sizeof(struct cpc_can_params);
+ msg->msgid = 0;
+
+ msg->msg.can_params.cc_type = CPC_CC_TYPE_SJA1000;
+
+ /* Acceptance filter open */
+ sja1000->acc_code0 = 0x00;
+ sja1000->acc_code1 = 0x00;
+ sja1000->acc_code2 = 0x00;
+ sja1000->acc_code3 = 0x00;
+
+ /* Acceptance filter open */
+ sja1000->acc_mask0 = 0xFF;
+ sja1000->acc_mask1 = 0xFF;
+ sja1000->acc_mask2 = 0xFF;
+ sja1000->acc_mask3 = 0xFF;
+
+ sja1000->btr0 = 0;
+ sja1000->btr1 = 0;
+
+ sja1000->outp_contr = SJA1000_DEFAULT_OUTPUT_CONTROL;
+ sja1000->mode = SJA1000_MOD_RM;
+}
+
+/*
+ * probe function for new CPC-USB devices
+ */
+static int ems_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct net_device *netdev;
+ struct ems_usb *dev;
+ int i, err = -ENOMEM;
+
+ netdev = alloc_candev(sizeof(struct ems_usb));
+ if (!netdev) {
+ dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
+ return -ENOMEM;
+ }
+
+ dev = netdev_priv(netdev);
+
+ dev->udev = interface_to_usbdev(intf);
+ dev->netdev = netdev;
+
+ dev->can.state = CAN_STATE_STOPPED;
+ dev->can.clock.freq = EMS_USB_ARM7_CLOCK;
+ dev->can.bittiming_const = &ems_usb_bittiming_const;
+ dev->can.do_set_bittiming = ems_usb_set_bittiming;
+ dev->can.do_set_mode = ems_usb_set_mode;
+
+ netdev->flags |= IFF_ECHO; /* we support local echo */
+
+ netdev->netdev_ops = &ems_usb_netdev_ops;
+
+ netdev->flags |= IFF_ECHO; /* we support local echo */
+
+ init_usb_anchor(&dev->rx_submitted);
+
+ init_usb_anchor(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+
+ for (i = 0; i < MAX_TX_URBS; i++)
+ dev->tx_contexts[i].echo_index = MAX_TX_URBS;
+
+ dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->intr_urb) {
+ dev_err(netdev->dev.parent, "Couldn't alloc intr URB\n");
+ goto cleanup_candev;
+ }
+
+ dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL);
+ if (!dev->intr_in_buffer) {
+ dev_err(netdev->dev.parent, "Couldn't alloc Intr buffer\n");
+ goto cleanup_intr_urb;
+ }
+
+ dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE +
+ sizeof(struct ems_cpc_msg), GFP_KERNEL);
+ if (!dev->tx_msg_buffer) {
+ dev_err(netdev->dev.parent, "Couldn't alloc Tx buffer\n");
+ goto cleanup_intr_in_buffer;
+ }
+
+ usb_set_intfdata(intf, dev);
+
+ SET_NETDEV_DEV(netdev, &intf->dev);
+
+ init_params_sja1000(&dev->active_params);
+
+ err = ems_usb_command_msg(dev, &dev->active_params);
+ if (err) {
+ dev_err(netdev->dev.parent,
+ "couldn't initialize controller: %d\n", err);
+ goto cleanup_tx_msg_buffer;
+ }
+
+ err = register_candev(netdev);
+ if (err) {
+ dev_err(netdev->dev.parent,
+ "couldn't register CAN device: %d\n", err);
+ goto cleanup_tx_msg_buffer;
+ }
+
+ return 0;
+
+cleanup_tx_msg_buffer:
+ kfree(dev->tx_msg_buffer);
+
+cleanup_intr_in_buffer:
+ kfree(dev->intr_in_buffer);
+
+cleanup_intr_urb:
+ usb_free_urb(dev->intr_urb);
+
+cleanup_candev:
+ free_candev(netdev);
+
+ return err;
+}
+
+/*
+ * called by the usb core when the device is removed from the system
+ */
+static void ems_usb_disconnect(struct usb_interface *intf)
+{
+ struct ems_usb *dev = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (dev) {
+ unregister_netdev(dev->netdev);
+ free_candev(dev->netdev);
+
+ unlink_all_urbs(dev);
+
+ usb_free_urb(dev->intr_urb);
+
+ kfree(dev->intr_in_buffer);
+ }
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver ems_usb_driver = {
+ .name = "ems_usb",
+ .probe = ems_usb_probe,
+ .disconnect = ems_usb_disconnect,
+ .id_table = ems_usb_table,
+};
+
+static int __init ems_usb_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "CPC-USB kernel driver loaded\n");
+
+ /* register this driver with the USB subsystem */
+ err = usb_register(&ems_usb_driver);
+
+ if (err) {
+ err("usb_register failed. Error number %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit ems_usb_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&ems_usb_driver);
+}
+
+module_init(ems_usb_init);
+module_exit(ems_usb_exit);
cp->uio_dev = iminor(inode);
- cnic_shutdown_bnx2_rx_ring(dev);
-
cnic_init_bnx2_tx_ring(dev);
cnic_init_bnx2_rx_ring(dev);
struct cnic_dev *dev = uinfo->priv;
struct cnic_local *cp = dev->cnic_priv;
+ cnic_shutdown_bnx2_rx_ring(dev);
+
cp->uio_dev = -1;
return 0;
}
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id;
- char mdio_bus_id[BUS_ID_SIZE];
+ char mdio_bus_id[MII_BUS_ID_SIZE];
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
pdata = pdev->dev.platform_data;
if (external_switch || dumb_switch) {
- strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
} else {
for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
continue;
if (!cpmac_mii->phy_map[phy_id])
continue;
- strncpy(mdio_bus_id, cpmac_mii->id, BUS_ID_SIZE);
+ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
break;
}
}
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
- /* Renegotiate with link partner */
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
if (autoneg_normal) {
- data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
- data |= BMCR_ANENABLE | BMCR_ANRESTART;
+ /* Renegotiate with link partner */
+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
+ } else {
+ /* Don't negotiate speed or duplex */
+ data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
+
+ /* Set speed and duplex static */
+ if (current_speed_selection == 10)
+ data &= ~BMCR_SPEED100;
+ else
+ data |= BMCR_SPEED100;
+
+ if (current_duplex != full)
+ data &= ~BMCR_FULLDPLX;
+ else
+ data |= BMCR_FULLDPLX;
}
e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
}
/** NOTE:: For DM646x the IN_VECTOR has changed */
#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH)
#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26)
+#define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27)
+
/* CPPI bit positions */
#define EMAC_CPPI_SOP_BIT BIT(31)
emac_int_enable(priv);
}
- if (unlikely(status & EMAC_DM644X_MAC_IN_VECTOR_HOST_INT)) {
+ mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT;
+ if (priv->version == EMAC_VERSION_2)
+ mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT;
+
+ if (unlikely(status & mask)) {
u32 ch, cause;
dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
netif_stop_queue(ndev);
.ndo_poll_controller = ehea_netpoll,
#endif
.ndo_get_stats = ehea_get_stats,
- .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = ehea_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = ehea_set_multicast_list,
wrfl();
}
-/**
- * igb_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- *
- * Updates entire Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count)
-{
- u32 hash_value, hash_bit, hash_reg;
- int i;
-
- /* clear mta_shadow */
- memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
- /* update mta_shadow from mc_addr_list */
- for (i = 0; (u32) i < mc_addr_count; i++) {
- hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-
- hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
- hash_bit = hash_value & 0x1F;
-
- hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
- mc_addr_list += (ETH_ALEN);
- }
-
- /* replace the entire MTA table */
- for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
- array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
- wrfl();
-}
-
/**
* igb_hash_mc_addr - Generate a multicast hash value
* @hw: pointer to the HW structure
* the multicast filter table array address and new table value. See
* igb_mta_set()
**/
-u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
{
u32 hash_value, hash_mask;
u8 bit_shift = 0;
return hash_value;
}
+/**
+ * igb_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+ wrfl();
+}
+
/**
* igb_clear_hw_cntrs_base - Clear base hardware counters
* @hw: pointer to the HW structure
#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
-extern u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
#endif
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/gpio.h>
#include <net/irda/irda.h>
#include <net/irda/irmod.h>
DCSR(si->txdma) |= DCSR_RUN;
}
+/*
+ * Set the IrDA communications mode.
+ */
+static void pxa_irda_set_mode(struct pxa_irda *si, int mode)
+{
+ if (si->pdata->transceiver_mode)
+ si->pdata->transceiver_mode(si->dev, mode);
+ else {
+ if (gpio_is_valid(si->pdata->gpio_pwdown))
+ gpio_set_value(si->pdata->gpio_pwdown,
+ !(mode & IR_OFF) ^
+ !si->pdata->gpio_pwdown_inverted);
+ pxa2xx_transceiver_mode(si->dev, mode);
+ }
+}
+
/*
* Set the IrDA communications speed.
*/
pxa_irda_disable_clk(si);
/* set board transceiver to SIR mode */
- si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+ pxa_irda_set_mode(si, IR_SIRMODE);
/* enable the STUART clock */
pxa_irda_enable_sirclk(si);
ICCR0 = 0;
/* set board transceiver to FIR mode */
- si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
+ pxa_irda_set_mode(si, IR_FIRMODE);
/* enable the FICP clock */
pxa_irda_enable_firclk(si);
local_irq_restore(flags);
/* power off board transceiver */
- si->pdata->transceiver_mode(si->dev, IR_OFF);
+ pxa_irda_set_mode(si, IR_OFF);
printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
}
if (err)
goto err_mem_5;
- if (si->pdata->startup)
+ if (gpio_is_valid(si->pdata->gpio_pwdown)) {
+ err = gpio_request(si->pdata->gpio_pwdown, "IrDA switch");
+ if (err)
+ goto err_startup;
+ err = gpio_direction_output(si->pdata->gpio_pwdown,
+ !si->pdata->gpio_pwdown_inverted);
+ if (err) {
+ gpio_free(si->pdata->gpio_pwdown);
+ goto err_startup;
+ }
+ }
+
+ if (si->pdata->startup) {
err = si->pdata->startup(si->dev);
- if (err)
- goto err_startup;
+ if (err)
+ goto err_startup;
+ }
+
+ if (gpio_is_valid(si->pdata->gpio_pwdown) && si->pdata->startup)
+ dev_warn(si->dev, "gpio_pwdown and startup() both defined!\n");
dev->netdev_ops = &pxa_irda_netdev_ops;
if (dev) {
struct pxa_irda *si = netdev_priv(dev);
unregister_netdev(dev);
+ if (gpio_is_valid(si->pdata->gpio_pwdown))
+ gpio_free(si->pdata->gpio_pwdown);
if (si->pdata->shutdown)
si->pdata->shutdown(si->dev);
kfree(si->tx_buff.head);
enum ixgbe_fc_mode last_lfc_mode;
/* Interrupt Throttle Rate */
- u32 itr_setting;
+ u32 rx_itr_setting;
+ u32 tx_itr_setting;
u16 eitr_low;
u16 eitr_high;
struct ixgbe_hw_stats stats;
/* Interrupt Throttle Rate */
- u32 eitr_param;
+ u32 rx_eitr_param;
+ u32 tx_eitr_param;
unsigned long state;
u64 tx_busy;
ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit;
/* only valid if in constant ITR mode */
- switch (adapter->itr_setting) {
+ switch (adapter->rx_itr_setting) {
case 0:
/* throttling disabled */
ec->rx_coalesce_usecs = 0;
break;
default:
/* fixed interrupt rate mode */
- ec->rx_coalesce_usecs = 1000000/adapter->eitr_param;
+ ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param;
break;
}
+
+ /* only valid if in constant ITR mode */
+ switch (adapter->tx_itr_setting) {
+ case 0:
+ /* throttling disabled */
+ ec->tx_coalesce_usecs = 0;
+ break;
+ case 1:
+ /* dynamic ITR mode */
+ ec->tx_coalesce_usecs = 1;
+ break;
+ default:
+ ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param;
+ break;
+ }
+
return 0;
}
struct ixgbe_q_vector *q_vector;
int i;
+ /*
+ * don't accept tx specific changes if we've got mixed RxTx vectors
+ * test and jump out here if needed before changing the rx numbers
+ */
+ if ((1000000/ec->tx_coalesce_usecs) != adapter->tx_eitr_param &&
+ adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count)
+ return -EINVAL;
+
if (ec->tx_max_coalesced_frames_irq)
adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq;
return -EINVAL;
/* store the value in ints/second */
- adapter->eitr_param = 1000000/ec->rx_coalesce_usecs;
+ adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
/* static value of interrupt rate */
- adapter->itr_setting = adapter->eitr_param;
+ adapter->rx_itr_setting = adapter->rx_eitr_param;
/* clear the lower bit as its used for dynamic state */
- adapter->itr_setting &= ~1;
+ adapter->rx_itr_setting &= ~1;
} else if (ec->rx_coalesce_usecs == 1) {
/* 1 means dynamic mode */
- adapter->eitr_param = 20000;
- adapter->itr_setting = 1;
+ adapter->rx_eitr_param = 20000;
+ adapter->rx_itr_setting = 1;
} else {
/*
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
- adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+ adapter->rx_eitr_param = IXGBE_MAX_RSC_INT_RATE;
else
- adapter->eitr_param = IXGBE_MAX_INT_RATE;
- adapter->itr_setting = 0;
+ adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->rx_itr_setting = 0;
+ }
+
+ if (ec->tx_coalesce_usecs > 1) {
+ /* check the limits */
+ if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
+ (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE))
+ return -EINVAL;
+
+ /* store the value in ints/second */
+ adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs;
+
+ /* static value of interrupt rate */
+ adapter->tx_itr_setting = adapter->tx_eitr_param;
+
+ /* clear the lower bit as its used for dynamic state */
+ adapter->tx_itr_setting &= ~1;
+ } else if (ec->tx_coalesce_usecs == 1) {
+ /* 1 means dynamic mode */
+ adapter->tx_eitr_param = 10000;
+ adapter->tx_itr_setting = 1;
+ } else {
+ adapter->tx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->tx_itr_setting = 0;
}
/* MSI/MSIx Interrupt Mode */
for (i = 0; i < num_vectors; i++) {
q_vector = adapter->q_vector[i];
if (q_vector->txr_count && !q_vector->rxr_count)
- /* tx vector gets half the rate */
- q_vector->eitr = (adapter->eitr_param >> 1);
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
else
/* rx only or mixed */
- q_vector->eitr = adapter->eitr_param;
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
/* Legacy Interrupt Mode */
} else {
q_vector = adapter->q_vector[0];
- q_vector->eitr = adapter->eitr_param;
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
r_idx + 1);
}
- /* if this is a tx only vector halve the interrupt rate */
if (q_vector->txr_count && !q_vector->rxr_count)
- q_vector->eitr = (adapter->eitr_param >> 1);
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
else if (q_vector->rxr_count)
- /* rx only */
- q_vector->eitr = adapter->eitr_param;
+ /* rx or mixed */
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter,
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter,
if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
work_done = budget;
- /* If all Rx work done, exit the polling mode */
+ /* If all Tx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->tx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
struct ixgbe_hw *hw = &adapter->hw;
IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
- EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param));
+ EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param));
ixgbe_set_ivar(adapter, 0, 0, 0);
ixgbe_set_ivar(adapter, 1, 0, 0);
return mrqc;
}
+/**
+ * ixgbe_configure_rscctl - enable RSC for the indicated ring
+ * @adapter: address of board private structure
+ * @index: index of ring to set
+ * @rx_buf_len: rx buffer length
+ **/
+static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index,
+ int rx_buf_len)
+{
+ struct ixgbe_ring *rx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int j;
+ u32 rscctrl;
+
+ rx_ring = &adapter->rx_ring[index];
+ j = rx_ring->reg_idx;
+ rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
+ rscctrl |= IXGBE_RSCCTL_RSCEN;
+ /*
+ * we must limit the number of descriptors so that the
+ * total size of max desc * buf_len is not greater
+ * than 65535
+ */
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+#if (MAX_SKB_FRAGS > 16)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+#elif (MAX_SKB_FRAGS > 8)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+#elif (MAX_SKB_FRAGS > 4)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+#else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+#endif
+ } else {
+ if (rx_buf_len < IXGBE_RXBUFFER_4096)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+ else if (rx_buf_len < IXGBE_RXBUFFER_8192)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+ else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
+}
+
/**
* ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
* @adapter: board private structure
u32 fctrl, hlreg0;
u32 reta = 0, mrqc = 0;
u32 rdrxctl;
- u32 rscctrl;
int rx_buf_len;
/* Decide whether to use packet split mode or not */
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
/* Enable 82599 HW-RSC */
- for (i = 0; i < adapter->num_rx_queues; i++) {
- rx_ring = &adapter->rx_ring[i];
- j = rx_ring->reg_idx;
- rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
- rscctrl |= IXGBE_RSCCTL_RSCEN;
- /*
- * we must limit the number of descriptors so that the
- * total size of max desc * buf_len is not greater
- * than 65535
- */
- if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
-#if (MAX_SKB_FRAGS > 16)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-#elif (MAX_SKB_FRAGS > 8)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
-#elif (MAX_SKB_FRAGS > 4)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
-#else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
-#endif
- } else {
- if (rx_buf_len < IXGBE_RXBUFFER_4096)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
- else if (rx_buf_len < IXGBE_RXBUFFER_8192)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
- else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
- }
- IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
- }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_configure_rscctl(adapter, i, rx_buf_len);
+
/* Disable RSC for ACK packets */
IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
(IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
ixgbe_napi_disable_all(adapter);
+ clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+ del_timer_sync(&adapter->sfp_timer);
del_timer_sync(&adapter->watchdog_timer);
cancel_work_sync(&adapter->watchdog_task);
/* If budget not fully consumed, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr(adapter);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
if (!q_vector)
goto err_out;
q_vector->adapter = adapter;
- q_vector->eitr = adapter->eitr_param;
+ if (q_vector->txr_count && !q_vector->rxr_count)
+ q_vector->eitr = adapter->tx_eitr_param;
+ else
+ q_vector->eitr = adapter->rx_eitr_param;
q_vector->v_idx = q_idx;
netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
adapter->q_vector[q_idx] = q_vector;
hw->fc.disable_fc_autoneg = false;
/* enable itr by default in dynamic mode */
- adapter->itr_setting = 1;
- adapter->eitr_param = 20000;
+ adapter->rx_itr_setting = 1;
+ adapter->rx_eitr_param = 20000;
+ adapter->tx_itr_setting = 1;
+ adapter->tx_eitr_param = 10000;
/* set defaults for eitr in MegaBytes */
adapter->eitr_low = 10;
*/
#include <linux/mlx4/cmd.h>
+#include <linux/cache.h>
#include "fw.h"
#include "icm.h"
#define INIT_HCA_IN_SIZE 0x200
#define INIT_HCA_VERSION_OFFSET 0x000
#define INIT_HCA_VERSION 2
+#define INIT_HCA_CACHELINE_SZ_OFFSET 0x0e
#define INIT_HCA_FLAGS_OFFSET 0x014
#define INIT_HCA_QPC_OFFSET 0x020
#define INIT_HCA_QPC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x10)
*((u8 *) mailbox->buf + INIT_HCA_VERSION_OFFSET) = INIT_HCA_VERSION;
+ *((u8 *) mailbox->buf + INIT_HCA_CACHELINE_SZ_OFFSET) =
+ (ilog2(cache_line_size()) - 4) << 5;
+
#if defined(__LITTLE_ENDIAN)
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) &= ~cpu_to_be32(1 << 1);
#elif defined(__BIG_ENDIAN)
}
netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
+ return 0;
err_out_detach:
netxen_nic_detach(adapter);
netif_wake_queue(adapter->netdev);
- goto done;
+ clear_bit(__NX_RESETTING, &adapter->state);
} else {
+ clear_bit(__NX_RESETTING, &adapter->state);
if (!netxen_nic_reset_context(adapter)) {
adapter->netdev->trans_start = jiffies;
- goto done;
+ return;
}
/* context reset failed, fall through for fw reset */
request_reset:
adapter->need_fw_reset = 1;
-done:
- clear_bit(__NX_RESETTING, &adapter->state);
}
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
base = &virt[hw_info[i].offset & (req.Size-1)];
if ((readb(base+0) == hw_info[i].a0) &&
(readb(base+2) == hw_info[i].a1) &&
- (readb(base+4) == hw_info[i].a2))
- break;
- }
- if (i < NR_INFO) {
- for (j = 0; j < 6; j++)
- dev->dev_addr[j] = readb(base + (j<<1));
+ (readb(base+4) == hw_info[i].a2)) {
+ for (j = 0; j < 6; j++)
+ dev->dev_addr[j] = readb(base + (j<<1));
+ break;
+ }
}
iounmap(virt);
int count;
int cpu;
- if (unlikely(!alloc_cpumask_var(&core_mask, GFP_KERNEL))) {
+ if (unlikely(!zalloc_cpumask_var(&core_mask, GFP_KERNEL))) {
printk(KERN_WARNING
"sfc: RSS disabled due to allocation failure\n");
return 1;
}
- cpumask_clear(core_mask);
count = 0;
for_each_online_cpu(cpu) {
if (!cpumask_test_cpu(cpu, core_mask)) {
if (ramsize > 0) {
u32 rxspace;
- hw->flags |= SKY2_HW_RAM_BUFFER;
pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
++hw->ports;
}
+ if (sky2_read8(hw, B2_E_0))
+ hw->flags |= SKY2_HW_RAM_BUFFER;
+
return 0;
}
.ndo_open = vnet_open,
.ndo_stop = vnet_close,
.ndo_set_multicast_list = vnet_set_rx_mode,
- .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = vnet_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = vnet_tx_timeout,
char *name;
unsigned long flags = 0;
- err = -EINVAL;
-
if (!capable(CAP_NET_ADMIN))
return -EPERM;
err = security_tun_dev_create();
flags |= TUN_TAP_DEV;
name = "tap%d";
} else
- goto failed;
+ return -EINVAL;
if (*ifr->ifr_name)
name = ifr->ifr_name;
int timeout)
{
struct usb_ctrlrequest *dr;
+ int retval;
dbg("kaweth_control()");
return -ENOMEM;
}
- dr->bRequestType= requesttype;
+ dr->bRequestType = requesttype;
dr->bRequest = request;
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(size);
- return kaweth_internal_control_msg(kaweth->dev,
- pipe,
- dr,
- data,
- size,
- timeout);
+ retval = kaweth_internal_control_msg(kaweth->dev,
+ pipe,
+ dr,
+ data,
+ size,
+ timeout);
+
+ kfree(dr);
+ return retval;
}
/****************************************************************
.rx_fixup = smsc95xx_rx_fixup,
.tx_fixup = smsc95xx_tx_fixup,
.status = smsc95xx_status,
- .flags = FLAG_ETHER,
+ .flags = FLAG_ETHER | FLAG_SEND_ZLP,
};
static const struct usb_device_id products[] = {
USB_DEVICE(0x0424, 0x9500),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9505 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9505),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E01),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{
/* SMSC9512/9514 USB Hub & Ethernet Device */
USB_DEVICE(0x0424, 0xec00),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9500 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9900),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9901),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9902),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9903),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9904),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9905),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9906),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500 USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9907),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9908),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9909),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
* NOTE: strictly conforming cdc-ether devices should expect
* the ZLP here, but ignore the one-byte packet.
*/
- if ((length % dev->maxpacket) == 0) {
+ if (!(info->flags & FLAG_SEND_ZLP) && (length % dev->maxpacket) == 0) {
urb->transfer_buffer_length++;
if (skb_tailroom(skb)) {
skb->data[skb->len] = 0;
-/* A simple network driver using virtio.
+/* A network driver using virtio.
*
* Copyright 2007 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
*
struct napi_struct napi;
unsigned int status;
- /* The skb we couldn't send because buffers were full. */
- struct sk_buff *last_xmit_skb;
-
- /* If we need to free in a timer, this is it. */
- struct timer_list xmit_free_timer;
-
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
- /* For cleaning up after transmission. */
- struct tasklet_struct tasklet;
- bool free_in_tasklet;
-
/* I like... big packets and I cannot lie! */
bool big_packets;
struct page *pages;
};
-static inline void *skb_vnet_hdr(struct sk_buff *skb)
+struct skb_vnet_hdr {
+ union {
+ struct virtio_net_hdr hdr;
+ struct virtio_net_hdr_mrg_rxbuf mhdr;
+ };
+ unsigned int num_sg;
+};
+
+static inline struct skb_vnet_hdr *skb_vnet_hdr(struct sk_buff *skb)
{
- return (struct virtio_net_hdr *)skb->cb;
+ return (struct skb_vnet_hdr *)skb->cb;
}
static void give_a_page(struct virtnet_info *vi, struct page *page)
/* We were probably waiting for more output buffers. */
netif_wake_queue(vi->dev);
-
- /* Make sure we re-xmit last_xmit_skb: if there are no more packets
- * queued, start_xmit won't be called. */
- tasklet_schedule(&vi->tasklet);
}
static void receive_skb(struct net_device *dev, struct sk_buff *skb,
unsigned len)
{
struct virtnet_info *vi = netdev_priv(dev);
- struct virtio_net_hdr *hdr = skb_vnet_hdr(skb);
+ struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
int err;
int i;
}
if (vi->mergeable_rx_bufs) {
- struct virtio_net_hdr_mrg_rxbuf *mhdr = skb_vnet_hdr(skb);
unsigned int copy;
char *p = page_address(skb_shinfo(skb)->frags[0].page);
len = PAGE_SIZE;
len -= sizeof(struct virtio_net_hdr_mrg_rxbuf);
- memcpy(hdr, p, sizeof(*mhdr));
- p += sizeof(*mhdr);
+ memcpy(&hdr->mhdr, p, sizeof(hdr->mhdr));
+ p += sizeof(hdr->mhdr);
copy = len;
if (copy > skb_tailroom(skb))
skb_shinfo(skb)->nr_frags--;
} else {
skb_shinfo(skb)->frags[0].page_offset +=
- sizeof(*mhdr) + copy;
+ sizeof(hdr->mhdr) + copy;
skb_shinfo(skb)->frags[0].size = len;
skb->data_len += len;
skb->len += len;
}
- while (--mhdr->num_buffers) {
+ while (--hdr->mhdr.num_buffers) {
struct sk_buff *nskb;
i = skb_shinfo(skb)->nr_frags;
nskb = vi->rvq->vq_ops->get_buf(vi->rvq, &len);
if (!nskb) {
pr_debug("%s: rx error: %d buffers missing\n",
- dev->name, mhdr->num_buffers);
+ dev->name, hdr->mhdr.num_buffers);
dev->stats.rx_length_errors++;
goto drop;
}
skb->len += len;
}
} else {
- len -= sizeof(struct virtio_net_hdr);
+ len -= sizeof(hdr->hdr);
if (len <= MAX_PACKET_LEN)
trim_pages(vi, skb);
dev->stats.rx_bytes += skb->len;
dev->stats.rx_packets++;
- if (hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
+ if (hdr->hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
pr_debug("Needs csum!\n");
- if (!skb_partial_csum_set(skb,hdr->csum_start,hdr->csum_offset))
+ if (!skb_partial_csum_set(skb,
+ hdr->hdr.csum_start,
+ hdr->hdr.csum_offset))
goto frame_err;
}
pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
ntohs(skb->protocol), skb->len, skb->pkt_type);
- if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
+ if (hdr->hdr.gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
- switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
+ switch (hdr->hdr.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
case VIRTIO_NET_HDR_GSO_TCPV4:
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
break;
default:
if (net_ratelimit())
printk(KERN_WARNING "%s: bad gso type %u.\n",
- dev->name, hdr->gso_type);
+ dev->name, hdr->hdr.gso_type);
goto frame_err;
}
- if (hdr->gso_type & VIRTIO_NET_HDR_GSO_ECN)
+ if (hdr->hdr.gso_type & VIRTIO_NET_HDR_GSO_ECN)
skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN;
- skb_shinfo(skb)->gso_size = hdr->gso_size;
+ skb_shinfo(skb)->gso_size = hdr->hdr.gso_size;
if (skb_shinfo(skb)->gso_size == 0) {
if (net_ratelimit())
printk(KERN_WARNING "%s: zero gso size.\n",
bool oom = false;
sg_init_table(sg, 2+MAX_SKB_FRAGS);
- for (;;) {
- struct virtio_net_hdr *hdr;
+ do {
+ struct skb_vnet_hdr *hdr;
skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
if (unlikely(!skb)) {
skb_put(skb, MAX_PACKET_LEN);
hdr = skb_vnet_hdr(skb);
- sg_set_buf(sg, hdr, sizeof(*hdr));
+ sg_set_buf(sg, &hdr->hdr, sizeof(hdr->hdr));
if (vi->big_packets) {
for (i = 0; i < MAX_SKB_FRAGS; i++) {
break;
}
vi->num++;
- }
+ } while (err >= num);
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
if (!vi->mergeable_rx_bufs)
return try_fill_recv_maxbufs(vi, gfp);
- for (;;) {
+ do {
skb_frag_t *f;
skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
break;
}
vi->num++;
- }
+ } while (err > 0);
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
return received;
}
-static void free_old_xmit_skbs(struct virtnet_info *vi)
+static unsigned int free_old_xmit_skbs(struct virtnet_info *vi)
{
struct sk_buff *skb;
- unsigned int len;
+ unsigned int len, tot_sgs = 0;
while ((skb = vi->svq->vq_ops->get_buf(vi->svq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
__skb_unlink(skb, &vi->send);
vi->dev->stats.tx_bytes += skb->len;
vi->dev->stats.tx_packets++;
+ tot_sgs += skb_vnet_hdr(skb)->num_sg;
kfree_skb(skb);
}
-}
-
-/* If the virtio transport doesn't always notify us when all in-flight packets
- * are consumed, we fall back to using this function on a timer to free them. */
-static void xmit_free(unsigned long data)
-{
- struct virtnet_info *vi = (void *)data;
-
- netif_tx_lock(vi->dev);
-
- free_old_xmit_skbs(vi);
-
- if (!skb_queue_empty(&vi->send))
- mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
-
- netif_tx_unlock(vi->dev);
+ return tot_sgs;
}
static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
{
- int num, err;
struct scatterlist sg[2+MAX_SKB_FRAGS];
- struct virtio_net_hdr_mrg_rxbuf *mhdr = skb_vnet_hdr(skb);
- struct virtio_net_hdr *hdr = skb_vnet_hdr(skb);
+ struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
sg_init_table(sg, 2+MAX_SKB_FRAGS);
pr_debug("%s: xmit %p %pM\n", vi->dev->name, skb, dest);
if (skb->ip_summed == CHECKSUM_PARTIAL) {
- hdr->flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
- hdr->csum_start = skb->csum_start - skb_headroom(skb);
- hdr->csum_offset = skb->csum_offset;
+ hdr->hdr.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
+ hdr->hdr.csum_start = skb->csum_start - skb_headroom(skb);
+ hdr->hdr.csum_offset = skb->csum_offset;
} else {
- hdr->flags = 0;
- hdr->csum_offset = hdr->csum_start = 0;
+ hdr->hdr.flags = 0;
+ hdr->hdr.csum_offset = hdr->hdr.csum_start = 0;
}
if (skb_is_gso(skb)) {
- hdr->hdr_len = skb_headlen(skb);
- hdr->gso_size = skb_shinfo(skb)->gso_size;
+ hdr->hdr.hdr_len = skb_headlen(skb);
+ hdr->hdr.gso_size = skb_shinfo(skb)->gso_size;
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
- hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
- hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
- hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_UDP;
else
BUG();
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN)
- hdr->gso_type |= VIRTIO_NET_HDR_GSO_ECN;
+ hdr->hdr.gso_type |= VIRTIO_NET_HDR_GSO_ECN;
} else {
- hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
- hdr->gso_size = hdr->hdr_len = 0;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE;
+ hdr->hdr.gso_size = hdr->hdr.hdr_len = 0;
}
- mhdr->num_buffers = 0;
+ hdr->mhdr.num_buffers = 0;
/* Encode metadata header at front. */
if (vi->mergeable_rx_bufs)
- sg_set_buf(sg, mhdr, sizeof(*mhdr));
+ sg_set_buf(sg, &hdr->mhdr, sizeof(hdr->mhdr));
else
- sg_set_buf(sg, hdr, sizeof(*hdr));
+ sg_set_buf(sg, &hdr->hdr, sizeof(hdr->hdr));
- num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
-
- err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
- if (err >= 0 && !vi->free_in_tasklet)
- mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
-
- return err;
-}
-
-static void xmit_tasklet(unsigned long data)
-{
- struct virtnet_info *vi = (void *)data;
-
- netif_tx_lock_bh(vi->dev);
- if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) >= 0) {
- vi->svq->vq_ops->kick(vi->svq);
- vi->last_xmit_skb = NULL;
- }
- if (vi->free_in_tasklet)
- free_old_xmit_skbs(vi);
- netif_tx_unlock_bh(vi->dev);
+ hdr->num_sg = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
+ return vi->svq->vq_ops->add_buf(vi->svq, sg, hdr->num_sg, 0, skb);
}
static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
+ int capacity;
again:
/* Free up any pending old buffers before queueing new ones. */
free_old_xmit_skbs(vi);
- /* If we has a buffer left over from last time, send it now. */
- if (unlikely(vi->last_xmit_skb) &&
- xmit_skb(vi, vi->last_xmit_skb) < 0)
- goto stop_queue;
-
- vi->last_xmit_skb = NULL;
-
/* Put new one in send queue and do transmit */
- if (likely(skb)) {
- __skb_queue_head(&vi->send, skb);
- if (xmit_skb(vi, skb) < 0) {
- vi->last_xmit_skb = skb;
- skb = NULL;
- goto stop_queue;
+ __skb_queue_head(&vi->send, skb);
+ capacity = xmit_skb(vi, skb);
+
+ /* This can happen with OOM and indirect buffers. */
+ if (unlikely(capacity < 0)) {
+ netif_stop_queue(dev);
+ dev_warn(&dev->dev, "Unexpected full queue\n");
+ if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+ vi->svq->vq_ops->disable_cb(vi->svq);
+ netif_start_queue(dev);
+ goto again;
}
+ return NETDEV_TX_BUSY;
}
-done:
- vi->svq->vq_ops->kick(vi->svq);
- return NETDEV_TX_OK;
-stop_queue:
- pr_debug("%s: virtio not prepared to send\n", dev->name);
- netif_stop_queue(dev);
-
- /* Activate callback for using skbs: if this returns false it
- * means some were used in the meantime. */
- if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
- vi->svq->vq_ops->disable_cb(vi->svq);
- netif_start_queue(dev);
- goto again;
- }
- if (skb) {
- /* Drop this skb: we only queue one. */
- vi->dev->stats.tx_dropped++;
- kfree_skb(skb);
+ vi->svq->vq_ops->kick(vi->svq);
+ /* Don't wait up for transmitted skbs to be freed. */
+ skb_orphan(skb);
+ nf_reset(skb);
+
+ /* Apparently nice girls don't return TX_BUSY; stop the queue
+ * before it gets out of hand. Naturally, this wastes entries. */
+ if (capacity < 2+MAX_SKB_FRAGS) {
+ netif_stop_queue(dev);
+ if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+ /* More just got used, free them then recheck. */
+ capacity += free_old_xmit_skbs(vi);
+ if (capacity >= 2+MAX_SKB_FRAGS) {
+ netif_start_queue(dev);
+ vi->svq->vq_ops->disable_cb(vi->svq);
+ }
+ }
}
- goto done;
+
+ return NETDEV_TX_OK;
}
static int virtnet_set_mac_address(struct net_device *dev, void *p)
vi->pages = NULL;
INIT_DELAYED_WORK(&vi->refill, refill_work);
- /* If they give us a callback when all buffers are done, we don't need
- * the timer. */
- vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
-
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4)
|| virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6)
skb_queue_head_init(&vi->recv);
skb_queue_head_init(&vi->send);
- tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
-
- if (!vi->free_in_tasklet)
- setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi);
-
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
- if (!vi->free_in_tasklet)
- del_timer_sync(&vi->xmit_free_timer);
-
/* Free our skbs in send and recv queues, if any. */
while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
kfree_skb(skb);
VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO,
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
- VIRTIO_F_NOTIFY_ON_EMPTY,
};
static struct virtio_driver virtio_net = {
static char arlan_drive_info[ARLAN_STR_SIZE] = "A655\n\0";
-static int arlan_sysctl_info(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_info(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
*lenp = pos;
if (!write)
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
else
{
*lenp = 0;
}
-static int arlan_sysctl_info161719(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_info161719(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
-static int arlan_sysctl_infotxRing(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_infotxRing(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
SARLBNpln(u_char, txBuffer, 0x800);
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
-static int arlan_sysctl_inforxRing(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_inforxRing(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
SARLBNpln(u_char, rxBuffer, 0x800);
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
-static int arlan_sysctl_info18(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_info18(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
static char conf_reset_result[200];
-static int arlan_configure(ctl_table * ctl, int write, struct file *filp,
+static int arlan_configure(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int pos = 0;
return -1;
*lenp = pos;
- return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return proc_dostring(ctl, write, buffer, lenp, ppos);
}
-static int arlan_sysctl_reset(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_reset(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int pos = 0;
} else
return -1;
*lenp = pos + 3;
- return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return proc_dostring(ctl, write, buffer, lenp, ppos);
}
{ USB_DEVICE(0x0cf3, 0x9170) },
/* Atheros TG121N */
{ USB_DEVICE(0x0cf3, 0x1001) },
+ /* TP-Link TL-WN821N v2 */
+ { USB_DEVICE(0x0cf3, 0x1002) },
/* Cace Airpcap NX */
{ USB_DEVICE(0xcace, 0x0300) },
/* D-Link DWA 160A */
AR_PHY_CH1_EXT_CCA,
AR_PHY_CH2_EXT_CCA
};
- u8 chainmask;
+ u8 chainmask, rx_chain_status;
+ rx_chain_status = REG_READ(ah, AR_PHY_RX_CHAINMASK);
if (AR_SREV_9285(ah))
chainmask = 0x9;
- else if (AR_SREV_9280(ah) || AR_SREV_9287(ah))
- chainmask = 0x1B;
- else
- chainmask = 0x3F;
+ else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) {
+ if ((rx_chain_status & 0x2) || (rx_chain_status & 0x4))
+ chainmask = 0x1B;
+ else
+ chainmask = 0x09;
+ } else {
+ if (rx_chain_status & 0x4)
+ chainmask = 0x3F;
+ else if (rx_chain_status & 0x2)
+ chainmask = 0x1B;
+ else
+ chainmask = 0x09;
+ }
h = ah->nfCalHist;
noise_floor = AR_PHY_CCA_MAX_AR9280_GOOD_VALUE;
else if (AR_SREV_9285(ah))
noise_floor = AR_PHY_CCA_MAX_AR9285_GOOD_VALUE;
+ else if (AR_SREV_9287(ah))
+ noise_floor = AR_PHY_CCA_MAX_AR9287_GOOD_VALUE;
else
noise_floor = AR_PHY_CCA_MAX_AR5416_GOOD_VALUE;
regVal |= (1 << (19 + i));
REG_WRITE(ah, 0x7834, regVal);
udelay(1);
+ regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1 << (19 + i)));
reg_field = MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9);
regVal |= (reg_field << (19 + i));
#define AR_PHY_CCA_MAX_AR5416_GOOD_VALUE -85
#define AR_PHY_CCA_MAX_AR9280_GOOD_VALUE -112
#define AR_PHY_CCA_MAX_AR9285_GOOD_VALUE -118
+#define AR_PHY_CCA_MAX_AR9287_GOOD_VALUE -118
#define AR_PHY_CCA_MAX_HIGH_VALUE -62
#define AR_PHY_CCA_MIN_BAD_VALUE -140
#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT 3
REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
eep->baseEepHeader.dacLpMode);
+ udelay(100);
+
REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP,
pModal->miscBits >> 2);
u16 powerLimit)
{
#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */
-#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */
+#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
{
- if (AR_SREV_9287_11(ah))
+ if (AR_SREV_9287_11_OR_LATER(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9287Modes_rx_gain_9287_1_1,
ARRAY_SIZE(ar9287Modes_rx_gain_9287_1_1), 6);
else if (AR_SREV_9280_20(ah))
ath9k_hw_init_rxgain_ini(ah);
- if (AR_SREV_9287_11(ah)) {
+ if (AR_SREV_9287_11_OR_LATER(ah)) {
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9287Modes_tx_gain_9287_1_1,
ARRAY_SIZE(ar9287Modes_tx_gain_9287_1_1), 6);
ath9k_hw_init_mode_regs(ah);
if (ah->is_pciexpress)
- ath9k_hw_configpcipowersave(ah, 0);
+ ath9k_hw_configpcipowersave(ah, 0, 0);
else
ath9k_hw_disablepcie(ah);
*/
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ val = REG_READ(ah, AR_PCU_MISC_MODE2) &
+ (~AR_PCU_MISC_MODE2_HWWAR1);
+
+ if (AR_SREV_9287_10_OR_LATER(ah))
+ val = val & (~AR_PCU_MISC_MODE2_HWWAR2);
+
+ REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
+ }
if (!AR_SREV_5416_20_OR_LATER(ah) ||
AR_SREV_9280_10_OR_LATER(ah))
static bool ath9k_hw_chip_reset(struct ath_hw *ah,
struct ath9k_channel *chan)
{
- if (OLC_FOR_AR9280_20_LATER) {
+ if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) {
if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON))
return false;
} else if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM))
struct ath9k_channel *curchan = ah->curchan;
u32 saveDefAntenna;
u32 macStaId1;
+ u64 tsf = 0;
int i, rx_chainmask, r;
ah->extprotspacing = sc->ht_extprotspacing;
if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
return -EIO;
- if (curchan)
+ if (curchan && !ah->chip_fullsleep)
ath9k_hw_getnf(ah, curchan);
if (bChannelChange &&
(chan->channel != ah->curchan->channel) &&
((chan->channelFlags & CHANNEL_ALL) ==
(ah->curchan->channelFlags & CHANNEL_ALL)) &&
- (!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) &&
- !IS_CHAN_A_5MHZ_SPACED(ah->curchan)))) {
+ !(AR_SREV_9280(ah) || IS_CHAN_A_5MHZ_SPACED(chan) ||
+ IS_CHAN_A_5MHZ_SPACED(ah->curchan))) {
if (ath9k_hw_channel_change(ah, chan, sc->tx_chan_width)) {
ath9k_hw_loadnf(ah, ah->curchan);
macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
+ /* For chips on which RTC reset is done, save TSF before it gets cleared */
+ if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ tsf = ath9k_hw_gettsf64(ah);
+
saveLedState = REG_READ(ah, AR_CFG_LED) &
(AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
AR_CFG_LED_BLINK_THRESH_SEL | AR_CFG_LED_BLINK_SLOW);
udelay(50);
}
+ /* Restore TSF */
+ if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ ath9k_hw_settsf64(ah, tsf);
+
if (AR_SREV_9280_10_OR_LATER(ah))
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
* Programming the SerDes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*/
-void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore)
+void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off)
{
u8 i;
+ u32 val;
if (ah->is_pciexpress != true)
return;
return;
/* Nothing to do on restore for 11N */
- if (restore)
- return;
+ if (!restore) {
+ if (AR_SREV_9280_20_OR_LATER(ah)) {
+ /*
+ * AR9280 2.0 or later chips use SerDes values from the
+ * initvals.h initialized depending on chipset during
+ * ath9k_hw_init()
+ */
+ for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
+ REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
+ INI_RA(&ah->iniPcieSerdes, i, 1));
+ }
+ } else if (AR_SREV_9280(ah) &&
+ (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+
+ /* Shut off CLKREQ active in L1 */
+ if (ah->config.pcie_clock_req)
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
+ else
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
- if (AR_SREV_9280_20_OR_LATER(ah)) {
- /*
- * AR9280 2.0 or later chips use SerDes values from the
- * initvals.h initialized depending on chipset during
- * ath9k_hw_init()
- */
- for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
- REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
- INI_RA(&ah->iniPcieSerdes, i, 1));
- }
- } else if (AR_SREV_9280(ah) &&
- (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
- /* Shut off CLKREQ active in L1 */
- if (ah->config.pcie_clock_req)
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
- else
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
-
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
+ } else {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
- } else {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+ /*
+ * Ignore ah->ah_config.pcie_clock_req setting for
+ * pre-AR9280 11n
+ */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
- /*
- * Ignore ah->ah_config.pcie_clock_req setting for
- * pre-AR9280 11n
- */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+ }
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
+ udelay(1000);
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
- }
+ /* set bit 19 to allow forcing of pcie core into L1 state */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
- udelay(1000);
+ /* Several PCIe massages to ensure proper behaviour */
+ if (ah->config.pcie_waen) {
+ val = ah->config.pcie_waen;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else {
+ if (AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) {
+ val = AR9285_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else if (AR_SREV_9280(ah)) {
+ /*
+ * On AR9280 chips bit 22 of 0x4004 needs to be
+ * set otherwise card may disappear.
+ */
+ val = AR9280_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else
+ val = AR_WA_DEFAULT;
+ }
- /* set bit 19 to allow forcing of pcie core into L1 state */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+ REG_WRITE(ah, AR_WA, val);
+ }
- /* Several PCIe massages to ensure proper behaviour */
- if (ah->config.pcie_waen) {
- REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
- } else {
- if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah))
- REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT);
+ if (power_off) {
/*
- * On AR9280 chips bit 22 of 0x4004 needs to be set to
- * otherwise card may disappear.
+ * Set PCIe workaround bits
+ * bit 14 in WA register (disable L1) should only
+ * be set when device enters D3 and be cleared
+ * when device comes back to D0.
*/
- else if (AR_SREV_9280(ah))
- REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT);
- else
- REG_WRITE(ah, AR_WA, AR_WA_DEFAULT);
+ if (ah->config.pcie_waen) {
+ if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ } else {
+ if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) &&
+ (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
+ (AR_SREV_9280(ah) &&
+ (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ }
+ }
}
}
}
#endif
- if ((ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9160) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9100) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9280) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9285))
- pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
- else
- pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP;
+ pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
if (AR_SREV_9280(ah) || AR_SREV_9285(ah))
pCap->hw_caps &= ~ATH9K_HW_CAP_4KB_SPLITTRANS;
#define AH_TSF_WRITE_TIMEOUT 100 /* (us) */
#define AH_TIME_QUANTUM 10
#define AR_KEYTABLE_SIZE 128
-#define POWER_UP_TIME 200000
+#define POWER_UP_TIME 10000
#define SPUR_RSSI_THRESH 40
#define CAB_TIMEOUT_VAL 10
const struct ath9k_beacon_state *bs);
bool ath9k_hw_setpower(struct ath_hw *ah,
enum ath9k_power_mode mode);
-void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore);
+void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off);
/* Interrupt Handling */
bool ath9k_hw_intrpend(struct ath_hw *ah);
int r;
ath9k_ps_wakeup(sc);
- ath9k_hw_configpcipowersave(ah, 0);
+ ath9k_hw_configpcipowersave(ah, 0, 0);
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
spin_unlock_bh(&sc->sc_resetlock);
ath9k_hw_phy_disable(ah);
- ath9k_hw_configpcipowersave(ah, 1);
+ ath9k_hw_configpcipowersave(ah, 1, 1);
ath9k_ps_restore(sc);
ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
bool blocked = !!ath_is_rfkill_set(sc);
wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
-
- if (blocked)
- ath_radio_disable(sc);
- else
- ath_radio_enable(sc);
}
static void ath_start_rfkill_poll(struct ath_softc *sc)
DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
ath_deinit_leds(sc);
+ wiphy_rfkill_stop_polling(sc->hw->wiphy);
for (i = 0; i < sc->num_sec_wiphy; i++) {
struct ath_wiphy *aphy = sc->sec_wiphy[i];
init_channel = ath_get_curchannel(sc, hw);
/* Reset SERDES registers */
- ath9k_hw_configpcipowersave(sc->sc_ah, 0);
+ ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0);
/*
* The basic interface to setting the hardware in a good
} else
sc->rx.rxlink = NULL;
- wiphy_rfkill_stop_polling(sc->hw->wiphy);
-
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(sc->sc_ah);
- ath9k_hw_configpcipowersave(sc->sc_ah, 1);
+ ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
sc->sc_flags |= SC_OP_INVALID;
#define AR_RC_HOSTIF 0x00000100
#define AR_WA 0x4004
+#define AR_WA_D3_L1_DISABLE (1 << 14)
#define AR9285_WA_DEFAULT 0x004a05cb
-#define AR9280_WA_DEFAULT 0x0040073f
+#define AR9280_WA_DEFAULT 0x0040073b
#define AR_WA_DEFAULT 0x0000073f
If unsure, say N.
+config B43_SDIO
+ bool "Broadcom 43xx SDIO device support (EXPERIMENTAL)"
+ depends on B43 && SSB_SDIOHOST_POSSIBLE && EXPERIMENTAL
+ select SSB_SDIOHOST
+ ---help---
+ Broadcom 43xx device support for Soft-MAC SDIO devices.
+
+ With this config option you can drive Soft-MAC b43 cards with a
+ Secure Digital I/O interface.
+ This includes the WLAN daughter card found on the Nintendo Wii
+ video game console.
+ Note that this does not support Broadcom 43xx Full-MAC devices.
+
+ It's safe to select Y here, even if you don't have a B43 SDIO device.
+
+ If unsure, say N.
+
# Data transfers to the device via PIO
-# This is only needed on PCMCIA devices. All others can do DMA properly.
+# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
config B43_PIO
bool
- depends on B43 && (B43_PCMCIA || B43_FORCE_PIO)
+ depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
select SSB_BLOCKIO
default y
b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
+b43-$(CONFIG_B43_SDIO) += sdio.o
b43-$(CONFIG_B43_DEBUG) += debugfs.o
obj-$(CONFIG_B43) += b43.o
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
- /* R/W lock for data transmission.
- * Transmissions on 2+ queues can run concurrently, but somebody else
- * might sync with TX by write_lock_irqsave()'ing. */
- rwlock_t tx_lock;
- /* Lock for LEDs access. */
- spinlock_t leds_lock;
-
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
struct work_struct tx_work;
/* Queue of packets to be transmitted. */
struct sk_buff_head tx_queue;
+
+ /* The device LEDs. */
+ struct b43_leds leds;
};
/* The type of the firmware file. */
/* The device initialization status.
* Use b43_status() to query. */
atomic_t __init_status;
- /* Saved init status for handling suspend. */
- int suspend_init_status;
bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */
bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */
bool radio_hw_enable; /* saved state of radio hardware enabled state */
- bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */
bool qos_enabled; /* TRUE, if QoS is used. */
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
/* Various statistics about the physical device. */
struct b43_stats stats;
- /* The device LEDs. */
- struct b43_led led_tx;
- struct b43_led led_rx;
- struct b43_led led_assoc;
- struct b43_led led_radio;
-
/* Reason code of the last interrupt. */
u32 irq_reason;
u32 dma_reason[6];
/* Debugging stuff follows. */
#ifdef CONFIG_B43_DEBUG
struct b43_dfsentry *dfsentry;
+ unsigned int irq_count;
+ unsigned int irq_bit_count[32];
+ unsigned int tx_count;
+ unsigned int rx_count;
#endif
};
add_dyn_dbg("debug_lo", B43_DBG_LO, 0);
add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0);
add_dyn_dbg("debug_keys", B43_DBG_KEYS, 0);
+ add_dyn_dbg("debug_verbose_stats", B43_DBG_VERBOSESTATS, 0);
#undef add_dyn_dbg
}
B43_DBG_LO,
B43_DBG_FIRMWARE,
B43_DBG_KEYS,
+ B43_DBG_VERBOSESTATS,
__B43_NR_DYNDBG,
};
ring->nr_failed_tx_packets++;
ring->nr_total_packet_tries += status->frame_count;
#endif /* DEBUG */
- ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb);
+ ieee80211_tx_status(dev->wl->hw, meta->skb);
- /* skb is freed by ieee80211_tx_status_irqsafe() */
+ /* skb is freed by ieee80211_tx_status() */
meta->skb = NULL;
} else {
/* No need to call free_descriptor_buffer here, as
static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
u16 ctl;
- spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl &= ~(1 << led_index);
else
ctl |= (1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
- spin_unlock_irqrestore(&wl->leds_lock, flags);
}
static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
u16 ctl;
- spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl |= (1 << led_index);
else
ctl &= ~(1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
- spin_unlock_irqrestore(&wl->leds_lock, flags);
}
-/* Callback from the LED subsystem. */
-static void b43_led_brightness_set(struct led_classdev *led_dev,
- enum led_brightness brightness)
+static void b43_led_update(struct b43_wldev *dev,
+ struct b43_led *led)
{
- struct b43_led *led = container_of(led_dev, struct b43_led, led_dev);
- struct b43_wldev *dev = led->dev;
bool radio_enabled;
+ bool turn_on;
- if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
+ if (!led->wl)
return;
- /* Checking the radio-enabled status here is slightly racy,
- * but we want to avoid the locking overhead and we don't care
- * whether the LED has the wrong state for a second. */
radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable);
- if (brightness == LED_OFF || !radio_enabled)
- b43_led_turn_off(dev, led->index, led->activelow);
+ /* The led->state read is racy, but we don't care. In case we raced
+ * with the brightness_set handler, we will be called again soon
+ * to fixup our state. */
+ if (radio_enabled)
+ turn_on = atomic_read(&led->state) != LED_OFF;
else
+ turn_on = 0;
+ if (turn_on == led->hw_state)
+ return;
+ led->hw_state = turn_on;
+
+ if (turn_on)
b43_led_turn_on(dev, led->index, led->activelow);
+ else
+ b43_led_turn_off(dev, led->index, led->activelow);
+}
+
+static void b43_leds_work(struct work_struct *work)
+{
+ struct b43_leds *leds = container_of(work, struct b43_leds, work);
+ struct b43_wl *wl = container_of(leds, struct b43_wl, leds);
+ struct b43_wldev *dev;
+
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED))
+ goto out_unlock;
+
+ b43_led_update(dev, &wl->leds.led_tx);
+ b43_led_update(dev, &wl->leds.led_rx);
+ b43_led_update(dev, &wl->leds.led_radio);
+ b43_led_update(dev, &wl->leds.led_assoc);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
+}
+
+/* Callback from the LED subsystem. */
+static void b43_led_brightness_set(struct led_classdev *led_dev,
+ enum led_brightness brightness)
+{
+ struct b43_led *led = container_of(led_dev, struct b43_led, led_dev);
+ struct b43_wl *wl = led->wl;
+
+ if (likely(!wl->leds.stop)) {
+ atomic_set(&led->state, brightness);
+ ieee80211_queue_work(wl->hw, &wl->leds.work);
+ }
}
static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
{
int err;
- b43_led_turn_off(dev, led_index, activelow);
- if (led->dev)
+ if (led->wl)
return -EEXIST;
if (!default_trigger)
return -EINVAL;
- led->dev = dev;
+ led->wl = dev->wl;
led->index = led_index;
led->activelow = activelow;
strncpy(led->name, name, sizeof(led->name));
+ atomic_set(&led->state, 0);
led->led_dev.name = led->name;
led->led_dev.default_trigger = default_trigger;
err = led_classdev_register(dev->dev->dev, &led->led_dev);
if (err) {
b43warn(dev->wl, "LEDs: Failed to register %s\n", name);
- led->dev = NULL;
+ led->wl = NULL;
return err;
}
+
return 0;
}
static void b43_unregister_led(struct b43_led *led)
{
- if (!led->dev)
+ if (!led->wl)
return;
led_classdev_unregister(&led->led_dev);
- b43_led_turn_off(led->dev, led->index, led->activelow);
- led->dev = NULL;
+ led->wl = NULL;
}
static void b43_map_led(struct b43_wldev *dev,
* generic LED triggers. */
switch (behaviour) {
case B43_LED_INACTIVE:
- break;
case B43_LED_OFF:
- b43_led_turn_off(dev, led_index, activelow);
- break;
case B43_LED_ON:
- b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_ACTIVITY:
case B43_LED_TRANSFER:
case B43_LED_APTRANSFER:
snprintf(name, sizeof(name),
"b43-%s::tx", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_tx, name,
+ b43_register_led(dev, &dev->wl->leds.led_tx, name,
ieee80211_get_tx_led_name(hw),
led_index, activelow);
snprintf(name, sizeof(name),
"b43-%s::rx", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_rx, name,
+ b43_register_led(dev, &dev->wl->leds.led_rx, name,
ieee80211_get_rx_led_name(hw),
led_index, activelow);
break;
case B43_LED_MODE_BG:
snprintf(name, sizeof(name),
"b43-%s::radio", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_radio, name,
+ b43_register_led(dev, &dev->wl->leds.led_radio, name,
ieee80211_get_radio_led_name(hw),
led_index, activelow);
- /* Sync the RF-kill LED state with radio and switch states. */
- if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev))
- b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_WEIRD:
case B43_LED_ASSOC:
snprintf(name, sizeof(name),
"b43-%s::assoc", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_assoc, name,
+ b43_register_led(dev, &dev->wl->leds.led_assoc, name,
ieee80211_get_assoc_led_name(hw),
led_index, activelow);
break;
}
}
-void b43_leds_init(struct b43_wldev *dev)
+static void b43_led_get_sprominfo(struct b43_wldev *dev,
+ unsigned int led_index,
+ enum b43_led_behaviour *behaviour,
+ bool *activelow)
{
struct ssb_bus *bus = dev->dev->bus;
u8 sprom[4];
- int i;
- enum b43_led_behaviour behaviour;
- bool activelow;
sprom[0] = bus->sprom.gpio0;
sprom[1] = bus->sprom.gpio1;
sprom[2] = bus->sprom.gpio2;
sprom[3] = bus->sprom.gpio3;
- for (i = 0; i < 4; i++) {
- if (sprom[i] == 0xFF) {
- /* There is no LED information in the SPROM
- * for this LED. Hardcode it here. */
- activelow = 0;
- switch (i) {
- case 0:
- behaviour = B43_LED_ACTIVITY;
- activelow = 1;
- if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
- behaviour = B43_LED_RADIO_ALL;
- break;
- case 1:
- behaviour = B43_LED_RADIO_B;
- if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
- behaviour = B43_LED_ASSOC;
- break;
- case 2:
- behaviour = B43_LED_RADIO_A;
- break;
- case 3:
- behaviour = B43_LED_OFF;
- break;
- default:
- B43_WARN_ON(1);
- return;
- }
+ if (sprom[led_index] == 0xFF) {
+ /* There is no LED information in the SPROM
+ * for this LED. Hardcode it here. */
+ *activelow = 0;
+ switch (led_index) {
+ case 0:
+ *behaviour = B43_LED_ACTIVITY;
+ *activelow = 1;
+ if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
+ *behaviour = B43_LED_RADIO_ALL;
+ break;
+ case 1:
+ *behaviour = B43_LED_RADIO_B;
+ if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
+ *behaviour = B43_LED_ASSOC;
+ break;
+ case 2:
+ *behaviour = B43_LED_RADIO_A;
+ break;
+ case 3:
+ *behaviour = B43_LED_OFF;
+ break;
+ default:
+ B43_WARN_ON(1);
+ return;
+ }
+ } else {
+ *behaviour = sprom[led_index] & B43_LED_BEHAVIOUR;
+ *activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW);
+ }
+}
+
+void b43_leds_init(struct b43_wldev *dev)
+{
+ struct b43_led *led;
+ unsigned int i;
+ enum b43_led_behaviour behaviour;
+ bool activelow;
+
+ /* Sync the RF-kill LED state (if we have one) with radio and switch states. */
+ led = &dev->wl->leds.led_radio;
+ if (led->wl) {
+ if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) {
+ b43_led_turn_on(dev, led->index, led->activelow);
+ led->hw_state = 1;
+ atomic_set(&led->state, 1);
} else {
- behaviour = sprom[i] & B43_LED_BEHAVIOUR;
- activelow = !!(sprom[i] & B43_LED_ACTIVELOW);
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
}
- b43_map_led(dev, i, behaviour, activelow);
}
+
+ /* Initialize TX/RX/ASSOC leds */
+ led = &dev->wl->leds.led_tx;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+ led = &dev->wl->leds.led_rx;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+ led = &dev->wl->leds.led_assoc;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+
+ /* Initialize other LED states. */
+ for (i = 0; i < B43_MAX_NR_LEDS; i++) {
+ b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
+ switch (behaviour) {
+ case B43_LED_OFF:
+ b43_led_turn_off(dev, i, activelow);
+ break;
+ case B43_LED_ON:
+ b43_led_turn_on(dev, i, activelow);
+ break;
+ default:
+ /* Leave others as-is. */
+ break;
+ }
+ }
+
+ dev->wl->leds.stop = 0;
}
void b43_leds_exit(struct b43_wldev *dev)
{
- b43_unregister_led(&dev->led_tx);
- b43_unregister_led(&dev->led_rx);
- b43_unregister_led(&dev->led_assoc);
- b43_unregister_led(&dev->led_radio);
+ struct b43_leds *leds = &dev->wl->leds;
+
+ b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow);
+ b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow);
+ b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow);
+ b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow);
+}
+
+void b43_leds_stop(struct b43_wldev *dev)
+{
+ struct b43_leds *leds = &dev->wl->leds;
+
+ leds->stop = 1;
+ cancel_work_sync(&leds->work);
+}
+
+void b43_leds_register(struct b43_wldev *dev)
+{
+ unsigned int i;
+ enum b43_led_behaviour behaviour;
+ bool activelow;
+
+ INIT_WORK(&dev->wl->leds.work, b43_leds_work);
+
+ /* Register the LEDs to the LED subsystem. */
+ for (i = 0; i < B43_MAX_NR_LEDS; i++) {
+ b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
+ b43_map_led(dev, i, behaviour, activelow);
+ }
+}
+
+void b43_leds_unregister(struct b43_wldev *dev)
+{
+ struct b43_leds *leds = &dev->wl->leds;
+
+ b43_unregister_led(&leds->led_tx);
+ b43_unregister_led(&leds->led_rx);
+ b43_unregister_led(&leds->led_assoc);
+ b43_unregister_led(&leds->led_radio);
}
#include <linux/types.h>
#include <linux/leds.h>
+#include <linux/workqueue.h>
#define B43_LED_MAX_NAME_LEN 31
struct b43_led {
- struct b43_wldev *dev;
+ struct b43_wl *wl;
/* The LED class device */
struct led_classdev led_dev;
/* The index number of the LED. */
bool activelow;
/* The unique name string for this LED device. */
char name[B43_LED_MAX_NAME_LEN + 1];
+ /* The current status of the LED. This is updated locklessly. */
+ atomic_t state;
+ /* The active state in hardware. */
+ bool hw_state;
};
+struct b43_leds {
+ struct b43_led led_tx;
+ struct b43_led led_rx;
+ struct b43_led led_radio;
+ struct b43_led led_assoc;
+
+ bool stop;
+ struct work_struct work;
+};
+
+#define B43_MAX_NR_LEDS 4
+
#define B43_LED_BEHAVIOUR 0x7F
#define B43_LED_ACTIVELOW 0x80
/* LED behaviour values */
B43_LED_INACTIVE,
};
+void b43_leds_register(struct b43_wldev *dev);
+void b43_leds_unregister(struct b43_wldev *dev);
void b43_leds_init(struct b43_wldev *dev);
void b43_leds_exit(struct b43_wldev *dev);
+void b43_leds_stop(struct b43_wldev *dev);
#else /* CONFIG_B43_LEDS */
/* LED support disabled */
-struct b43_led {
+struct b43_leds {
/* empty */
};
+static inline void b43_leds_register(struct b43_wldev *dev)
+{
+}
+static inline void b43_leds_unregister(struct b43_wldev *dev)
+{
+}
static inline void b43_leds_init(struct b43_wldev *dev)
{
}
static inline void b43_leds_exit(struct b43_wldev *dev)
{
}
+static inline void b43_leds_stop(struct b43_wldev *dev)
+{
+}
#endif /* CONFIG_B43_LEDS */
#endif /* B43_LEDS_H_ */
Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+ SDIO support
+ Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es>
+
Some parts of the code in this file are derived from the ipw2200
driver Copyright(c) 2003 - 2004 Intel Corporation.
#include "xmit.h"
#include "lo.h"
#include "pcmcia.h"
+#include "sdio.h"
+#include <linux/mmc/sdio_func.h>
MODULE_DESCRIPTION("Broadcom B43 wireless driver");
MODULE_AUTHOR("Martin Langer");
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
- if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
/* wl->mutex is enough. */
b43_do_beacon_update_trigger_work(dev);
mmiowb();
/* Re-enable interrupts on the device by restoring the current interrupt mask. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
+
+#if B43_DEBUG
+ if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ dev->irq_count++;
+ for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+ if (reason & (1 << i))
+ dev->irq_bit_count[i]++;
+ }
+ }
+#endif
}
/* Interrupt thread handler. Handles device interrupts in thread context. */
return ret;
}
+/* SDIO interrupt handler. This runs in process context. */
+static void b43_sdio_interrupt_handler(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+ irqreturn_t ret;
+
+ mutex_lock(&wl->mutex);
+
+ ret = b43_do_interrupt(dev);
+ if (ret == IRQ_WAKE_THREAD)
+ b43_do_interrupt_thread(dev);
+
+ mutex_unlock(&wl->mutex);
+}
+
void b43_do_release_fw(struct b43_firmware_file *fw)
{
release_firmware(fw->data);
cfp_pretbtt = 50;
}
b43_write16(dev, 0x612, cfp_pretbtt);
+
+ /* FIXME: We don't currently implement the PMQ mechanism,
+ * so always disable it. If we want to implement PMQ,
+ * we need to enable it here (clear DISCPMQ) in AP mode.
+ */
+ if (0 /* ctl & B43_MACCTL_AP */) {
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL)
+ & ~B43_MACCTL_DISCPMQ);
+ } else {
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL)
+ | B43_MACCTL_DISCPMQ);
+ }
}
static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
wmb();
+
+#if B43_DEBUG
+ if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ unsigned int i;
+
+ b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
+ dev->irq_count / 15,
+ dev->tx_count / 15,
+ dev->rx_count / 15);
+ dev->irq_count = 0;
+ dev->tx_count = 0;
+ dev->rx_count = 0;
+ for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+ if (dev->irq_bit_count[i]) {
+ b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n",
+ dev->irq_bit_count[i] / 15, i, (1 << i));
+ dev->irq_bit_count[i] = 0;
+ }
+ }
+ }
+#endif
}
static void do_periodic_work(struct b43_wldev *dev)
static int b43_rng_read(struct hwrng *rng, u32 *data)
{
struct b43_wl *wl = (struct b43_wl *)rng->priv;
+ struct b43_wldev *dev;
+ int count = -ENODEV;
- /* FIXME: We need to take wl->mutex here to make sure the device
- * is not going away from under our ass. However it could deadlock
- * with hwrng internal locking. */
-
- *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) {
+ *data = b43_read16(dev, B43_MMIO_RNG);
+ count = sizeof(u16);
+ }
+ mutex_unlock(&wl->mutex);
- return (sizeof(u16));
+ return count;
}
#endif /* CONFIG_B43_HWRNG */
dev_kfree_skb(skb); /* Drop it */
}
+#if B43_DEBUG
+ dev->tx_count++;
+#endif
mutex_unlock(&wl->mutex);
}
/* Disable interrupts on the device. */
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
/* wl->mutex is locked. That is enough. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
spin_unlock_irq(&wl->hardirq_lock);
}
- /* Synchronize the interrupt handlers. Unlock to avoid deadlocks. */
+ /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
orig_dev = dev;
mutex_unlock(&wl->mutex);
- synchronize_irq(dev->dev->irq);
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ b43_sdio_free_irq(dev);
+ } else {
+ synchronize_irq(dev->dev->irq);
+ free_irq(dev->dev->irq, dev);
+ }
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (!dev)
dev_kfree_skb(skb_dequeue(&wl->tx_queue));
b43_mac_suspend(dev);
- free_irq(dev->dev->irq, dev);
+ b43_leds_exit(dev);
b43dbg(wl, "Wireless interface stopped\n");
return dev;
B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
drain_txstatus_queue(dev);
- err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
- b43_interrupt_thread_handler,
- IRQF_SHARED, KBUILD_MODNAME, dev);
- if (err) {
- b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
- goto out;
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
+ if (err) {
+ b43err(dev->wl, "Cannot request SDIO IRQ\n");
+ goto out;
+ }
+ } else {
+ err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
+ b43_interrupt_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
+ goto out;
+ }
}
/* We are ready to run. */
/* Start maintainance work */
b43_periodic_tasks_setup(dev);
+ b43_leds_init(dev);
+
b43dbg(dev->wl, "Wireless interface started\n");
- out:
+out:
return err;
}
macctl |= B43_MACCTL_PSM_JMP0;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
- if (!dev->suspend_in_progress) {
- b43_leds_exit(dev);
- b43_rng_exit(dev->wl);
- }
b43_dma_free(dev);
b43_pio_free(dev);
b43_chip_exit(dev);
/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
- struct b43_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct ssb_sprom *sprom = &bus->sprom;
struct b43_phy *phy = &dev->phy;
/* Maximum Contention Window */
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
- if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) {
+ if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
+ (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
+ B43_FORCE_PIO) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {
ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_upload_card_macaddress(dev);
b43_security_init(dev);
- if (!dev->suspend_in_progress)
- b43_rng_init(wl);
+
+ ieee80211_wake_queues(dev->wl->hw);
ieee80211_wake_queues(dev->wl->hw);
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (!dev->suspend_in_progress)
- b43_leds_init(dev);
out:
return err;
/* Initialize struct b43_wl */
wl->hw = hw;
- spin_lock_init(&wl->leds_lock);
mutex_init(&wl->mutex);
spin_lock_init(&wl->hardirq_lock);
INIT_LIST_HEAD(&wl->devlist);
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
+ b43_leds_register(wl->current_dev);
+ b43_rng_init(wl);
}
out:
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
wl->hw->queues = wl->mac80211_initially_registered_queues;
+ b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
b43_one_core_detach(dev);
if (list_empty(&wl->devlist)) {
+ b43_rng_exit(wl);
+ b43_leds_unregister(wldev);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
*/
ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}
-#ifdef CONFIG_PM
-
-static int b43_suspend(struct ssb_device *dev, pm_message_t state)
-{
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
- struct b43_wl *wl = wldev->wl;
-
- b43dbg(wl, "Suspending...\n");
-
- mutex_lock(&wl->mutex);
- wldev->suspend_in_progress = true;
- wldev->suspend_init_status = b43_status(wldev);
- if (wldev->suspend_init_status >= B43_STAT_STARTED)
- wldev = b43_wireless_core_stop(wldev);
- if (wldev && wldev->suspend_init_status >= B43_STAT_INITIALIZED)
- b43_wireless_core_exit(wldev);
- mutex_unlock(&wl->mutex);
-
- b43dbg(wl, "Device suspended.\n");
-
- return 0;
-}
-
-static int b43_resume(struct ssb_device *dev)
-{
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
- struct b43_wl *wl = wldev->wl;
- int err = 0;
-
- b43dbg(wl, "Resuming...\n");
-
- mutex_lock(&wl->mutex);
- if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
- err = b43_wireless_core_init(wldev);
- if (err) {
- b43err(wl, "Resume failed at core init\n");
- goto out;
- }
- }
- if (wldev->suspend_init_status >= B43_STAT_STARTED) {
- err = b43_wireless_core_start(wldev);
- if (err) {
- b43_leds_exit(wldev);
- b43_rng_exit(wldev->wl);
- b43_wireless_core_exit(wldev);
- b43err(wl, "Resume failed at core start\n");
- goto out;
- }
- }
- b43dbg(wl, "Device resumed.\n");
- out:
- wldev->suspend_in_progress = false;
- mutex_unlock(&wl->mutex);
- return err;
-}
-
-#else /* CONFIG_PM */
-# define b43_suspend NULL
-# define b43_resume NULL
-#endif /* CONFIG_PM */
-
static struct ssb_driver b43_ssb_driver = {
.name = KBUILD_MODNAME,
.id_table = b43_ssb_tbl,
.probe = b43_probe,
.remove = b43_remove,
- .suspend = b43_suspend,
- .resume = b43_resume,
};
static void b43_print_driverinfo(void)
{
const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
- *feat_leds = "";
+ *feat_leds = "", *feat_sdio = "";
#ifdef CONFIG_B43_PCI_AUTOSELECT
feat_pci = "P";
#endif
#ifdef CONFIG_B43_LEDS
feat_leds = "L";
+#endif
+#ifdef CONFIG_B43_SDIO
+ feat_sdio = "S";
#endif
printk(KERN_INFO "Broadcom 43xx driver loaded "
- "[ Features: %s%s%s%s, Firmware-ID: "
+ "[ Features: %s%s%s%s%s, Firmware-ID: "
B43_SUPPORTED_FIRMWARE_ID " ]\n",
feat_pci, feat_pcmcia, feat_nphy,
- feat_leds);
+ feat_leds, feat_sdio);
}
static int __init b43_init(void)
err = b43_pcmcia_init();
if (err)
goto err_dfs_exit;
- err = ssb_driver_register(&b43_ssb_driver);
+ err = b43_sdio_init();
if (err)
goto err_pcmcia_exit;
+ err = ssb_driver_register(&b43_ssb_driver);
+ if (err)
+ goto err_sdio_exit;
b43_print_driverinfo();
return err;
+err_sdio_exit:
+ b43_sdio_exit();
err_pcmcia_exit:
b43_pcmcia_exit();
err_dfs_exit:
static void __exit b43_exit(void)
{
ssb_driver_unregister(&b43_ssb_driver);
+ b43_sdio_exit();
b43_pcmcia_exit();
b43_debugfs_exit();
}
return B43_TXPWR_RES_DONE;
}
+void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+ if (on) {
+ b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8);
+ } else {
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x0007);
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x0007);
+ }
+}
+
const struct b43_phy_operations b43_phyops_lp = {
.allocate = b43_lpphy_op_allocate,
.free = b43_lpphy_op_free,
.radio_read = b43_lpphy_op_radio_read,
.radio_write = b43_lpphy_op_radio_write,
.software_rfkill = b43_lpphy_op_software_rfkill,
- .switch_analog = b43_phyop_switch_analog_generic,
+ .switch_analog = b43_lpphy_op_switch_analog,
.switch_channel = b43_lpphy_op_switch_channel,
.get_default_chan = b43_lpphy_op_get_default_chan,
.set_rx_antenna = b43_lpphy_op_set_rx_antenna,
q->buffer_used -= total_len;
q->free_packet_slots += 1;
- ieee80211_tx_status_irqsafe(dev->wl->hw, pack->skb);
+ ieee80211_tx_status(dev->wl->hw, pack->skb);
pack->skb = NULL;
list_add(&pack->list, &q->packets_list);
/* Returns TRUE, if the radio is enabled in hardware. */
bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
{
- if (dev->phy.rev >= 3) {
+ if (dev->phy.rev >= 3 || dev->phy.type == B43_PHYTYPE_LP) {
if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
& B43_MMIO_RADIO_HWENABLED_HI_MASK))
return 1;
--- /dev/null
+/*
+ * Broadcom B43 wireless driver
+ *
+ * SDIO over Sonics Silicon Backplane bus glue for b43.
+ *
+ * Copyright (C) 2009 Albert Herranz
+ * Copyright (C) 2009 Michael Buesch <mb@bu3sch.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/ssb/ssb.h>
+
+#include "sdio.h"
+#include "b43.h"
+
+
+#define HNBU_CHIPID 0x01 /* vendor & device id */
+
+#define B43_SDIO_BLOCK_SIZE 64 /* rx fifo max size in bytes */
+
+
+static const struct b43_sdio_quirk {
+ u16 vendor;
+ u16 device;
+ unsigned int quirks;
+} b43_sdio_quirks[] = {
+ { 0x14E4, 0x4318, SSB_QUIRK_SDIO_READ_AFTER_WRITE32, },
+ { },
+};
+
+
+static unsigned int b43_sdio_get_quirks(u16 vendor, u16 device)
+{
+ const struct b43_sdio_quirk *q;
+
+ for (q = b43_sdio_quirks; q->quirks; q++) {
+ if (vendor == q->vendor && device == q->device)
+ return q->quirks;
+ }
+
+ return 0;
+}
+
+static void b43_sdio_interrupt_dispatcher(struct sdio_func *func)
+{
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+ struct b43_wldev *dev = sdio->irq_handler_opaque;
+
+ if (unlikely(b43_status(dev) < B43_STAT_STARTED))
+ return;
+
+ sdio_release_host(func);
+ sdio->irq_handler(dev);
+ sdio_claim_host(func);
+}
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev))
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct sdio_func *func = bus->host_sdio;
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+ int err;
+
+ sdio->irq_handler_opaque = dev;
+ sdio->irq_handler = handler;
+ sdio_claim_host(func);
+ err = sdio_claim_irq(func, b43_sdio_interrupt_dispatcher);
+ sdio_release_host(func);
+
+ return err;
+}
+
+void b43_sdio_free_irq(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct sdio_func *func = bus->host_sdio;
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+ sdio->irq_handler_opaque = NULL;
+ sdio->irq_handler = NULL;
+}
+
+static int b43_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct b43_sdio *sdio;
+ struct sdio_func_tuple *tuple;
+ u16 vendor = 0, device = 0;
+ int error;
+
+ /* Look for the card chip identifier. */
+ tuple = func->tuples;
+ while (tuple) {
+ switch (tuple->code) {
+ case 0x80:
+ switch (tuple->data[0]) {
+ case HNBU_CHIPID:
+ if (tuple->size != 5)
+ break;
+ vendor = tuple->data[1] | (tuple->data[2]<<8);
+ device = tuple->data[3] | (tuple->data[4]<<8);
+ dev_info(&func->dev, "Chip ID %04x:%04x\n",
+ vendor, device);
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ tuple = tuple->next;
+ }
+ if (!vendor || !device) {
+ error = -ENODEV;
+ goto out;
+ }
+
+ sdio_claim_host(func);
+ error = sdio_set_block_size(func, B43_SDIO_BLOCK_SIZE);
+ if (error) {
+ dev_err(&func->dev, "failed to set block size to %u bytes,"
+ " error %d\n", B43_SDIO_BLOCK_SIZE, error);
+ goto err_release_host;
+ }
+ error = sdio_enable_func(func);
+ if (error) {
+ dev_err(&func->dev, "failed to enable func, error %d\n", error);
+ goto err_release_host;
+ }
+ sdio_release_host(func);
+
+ sdio = kzalloc(sizeof(*sdio), GFP_KERNEL);
+ if (!sdio) {
+ error = -ENOMEM;
+ dev_err(&func->dev, "failed to allocate ssb bus\n");
+ goto err_disable_func;
+ }
+ error = ssb_bus_sdiobus_register(&sdio->ssb, func,
+ b43_sdio_get_quirks(vendor, device));
+ if (error) {
+ dev_err(&func->dev, "failed to register ssb sdio bus,"
+ " error %d\n", error);
+ goto err_free_ssb;
+ }
+ sdio_set_drvdata(func, sdio);
+
+ return 0;
+
+err_free_ssb:
+ kfree(sdio);
+err_disable_func:
+ sdio_disable_func(func);
+err_release_host:
+ sdio_release_host(func);
+out:
+ return error;
+}
+
+static void b43_sdio_remove(struct sdio_func *func)
+{
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+
+ ssb_bus_unregister(&sdio->ssb);
+ sdio_disable_func(func);
+ kfree(sdio);
+ sdio_set_drvdata(func, NULL);
+}
+
+static const struct sdio_device_id b43_sdio_ids[] = {
+ { SDIO_DEVICE(0x02d0, 0x044b) }, /* Nintendo Wii WLAN daughter card */
+ { },
+};
+
+static struct sdio_driver b43_sdio_driver = {
+ .name = "b43-sdio",
+ .id_table = b43_sdio_ids,
+ .probe = b43_sdio_probe,
+ .remove = b43_sdio_remove,
+};
+
+int b43_sdio_init(void)
+{
+ return sdio_register_driver(&b43_sdio_driver);
+}
+
+void b43_sdio_exit(void)
+{
+ sdio_unregister_driver(&b43_sdio_driver);
+}
--- /dev/null
+#ifndef B43_SDIO_H_
+#define B43_SDIO_H_
+
+#include <linux/ssb/ssb.h>
+
+struct b43_wldev;
+
+
+#ifdef CONFIG_B43_SDIO
+
+struct b43_sdio {
+ struct ssb_bus ssb;
+ void *irq_handler_opaque;
+ void (*irq_handler)(struct b43_wldev *dev);
+};
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev));
+void b43_sdio_free_irq(struct b43_wldev *dev);
+
+int b43_sdio_init(void);
+void b43_sdio_exit(void);
+
+
+#else /* CONFIG_B43_SDIO */
+
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev))
+{
+ return -ENODEV;
+}
+void b43_sdio_free_irq(struct b43_wldev *dev)
+{
+}
+static inline int b43_sdio_init(void)
+{
+ return 0;
+}
+static inline void b43_sdio_exit(void)
+{
+}
+
+#endif /* CONFIG_B43_SDIO */
+#endif /* B43_SDIO_H_ */
}
memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
- ieee80211_rx_irqsafe(dev->wl->hw, skb);
+ ieee80211_rx(dev->wl->hw, skb);
+#if B43_DEBUG
+ dev->rx_count++;
+#endif
return;
drop:
b43dbg(dev->wl, "RX: Packet dropped\n");
agg->frame_count, txq_id, idx);
hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
+ if (!hdr) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
agg->frame_count, txq_id, idx);
hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
+ if (!hdr) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
}
spin_unlock_irqrestore(&rxq->lock, flags);
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ priority |= __GFP_NOWARN;
/* Alloc a new receive buffer */
skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
priority);
if (!skb) {
- IWL_CRIT(priv, "Can not allocate SKB buffers\n");
+ if (net_ratelimit())
+ IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
/* We don't reschedule replenish work here -- we will
* call the restock method and if it still needs
* more buffers it will schedule replenish */
struct iwl_host_cmd cmd = {
.id = REPLY_WEPKEY,
.data = wep_cmd,
- .flags = CMD_SYNC,
+ .flags = CMD_ASYNC,
};
memset(wep_cmd, 0, cmd_size +
}
spin_unlock_irqrestore(&rxq->lock, flags);
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ priority |= __GFP_NOWARN;
/* Alloc a new receive buffer */
skb = alloc_skb(priv->hw_params.rx_buf_size, priority);
if (!skb) {
if (net_ratelimit())
- IWL_CRIT(priv, ": Can not allocate SKB buffers\n");
+ IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
/* We don't reschedule replenish work here -- we will
* call the restock method and if it still needs
* more buffers it will schedule replenish */
{
}
-static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
menuconfig WL12XX
- boolean "TI wl12xx driver support"
+ tristate "TI wl12xx driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable TI wl12xx driver support. The drivers make
/* Find bulk out endpoint */
endpoint = &iface_desc->endpoint[1].desc;
- if ((endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT &&
+ if (usb_endpoint_dir_out(endpoint) &&
usb_endpoint_xfer_bulk(endpoint)) {
bulk_out_ep = endpoint->bEndpointAddress;
} else {
}
/* Enable the Rx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- reg_data | XEL_RSR_RECV_IE_MASK);
+ XEL_RSR_RECV_IE_MASK);
/* Enable the Rx interrupts for the second Buffer if
* configured in HW */
if (drvdata->rx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
XEL_RSR_OFFSET,
- reg_data | XEL_RSR_RECV_IE_MASK);
+ XEL_RSR_RECV_IE_MASK);
}
/* Enable the Global Interrupt Enable */
{
int err;
- if (!alloc_cpumask_var(&marked_cpus, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
return -ENOMEM;
- cpumask_clear(marked_cpus);
start_cpu_work();
#define PARPORT_MIN_SPINTIME_VALUE 1
#define PARPORT_MAX_SPINTIME_VALUE 1000
-static int do_active_device(ctl_table *table, int write, struct file *filp,
+static int do_active_device(ctl_table *table, int write,
void __user *result, size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
#ifdef CONFIG_PARPORT_1284
-static int do_autoprobe(ctl_table *table, int write, struct file *filp,
+static int do_autoprobe(ctl_table *table, int write,
void __user *result, size_t *lenp, loff_t *ppos)
{
struct parport_device_info *info = table->extra2;
#endif /* IEEE1284.3 support. */
static int do_hardware_base_addr (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
static int do_hardware_irq (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
static int do_hardware_dma (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
static int do_hardware_modes (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
__func__, status);
return retval;
}
- info->hardware_id.string[sizeof(info->hardware_id.length) - 1] = '\0';
if (info->current_status && (info->valid & ACPI_VALID_HID) &&
(!strcmp(info->hardware_id.string, IBM_HARDWARE_ID1) ||
#define SLOT_NAME_SIZE 10
struct slot {
- u8 bus;
- u8 device;
u8 state;
- u8 hp_slot;
- u32 number;
struct controller *ctrl;
- struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
- struct list_head slot_list;
struct delayed_work work; /* work for button event */
struct mutex lock;
};
};
struct controller {
- struct mutex crit_sect; /* critical section mutex */
struct mutex ctrl_lock; /* controller lock */
- int num_slots; /* Number of slots on ctlr */
- int slot_num_inc; /* 1 or -1 */
- struct pci_dev *pci_dev;
struct pcie_device *pcie; /* PCI Express port service */
- struct list_head slot_list;
- struct hpc_ops *hpc_ops;
+ struct slot *slot;
wait_queue_head_t queue; /* sleep & wake process */
- u8 slot_device_offset;
- u32 first_slot; /* First physical slot number */ /* PCIE only has 1 slot */
- u8 slot_bus; /* Bus where the slots handled by this controller sit */
u32 slot_cap;
u8 cap_base;
struct timer_list poll_timer;
#define POWERON_STATE 3
#define POWEROFF_STATE 4
-/* Error messages */
-#define INTERLOCK_OPEN 0x00000002
-#define ADD_NOT_SUPPORTED 0x00000003
-#define CARD_FUNCTIONING 0x00000005
-#define ADAPTER_NOT_SAME 0x00000006
-#define NO_ADAPTER_PRESENT 0x00000009
-#define NOT_ENOUGH_RESOURCES 0x0000000B
-#define DEVICE_TYPE_NOT_SUPPORTED 0x0000000C
-#define WRONG_BUS_FREQUENCY 0x0000000D
-#define POWER_FAILURE 0x0000000E
-
-/* Field definitions in Slot Capabilities Register */
-#define ATTN_BUTTN_PRSN 0x00000001
-#define PWR_CTRL_PRSN 0x00000002
-#define MRL_SENS_PRSN 0x00000004
-#define ATTN_LED_PRSN 0x00000008
-#define PWR_LED_PRSN 0x00000010
-#define HP_SUPR_RM_SUP 0x00000020
-#define EMI_PRSN 0x00020000
-#define NO_CMD_CMPL_SUP 0x00040000
-
-#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
-#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
-#define MRL_SENS(ctrl) ((ctrl)->slot_cap & MRL_SENS_PRSN)
-#define ATTN_LED(ctrl) ((ctrl)->slot_cap & ATTN_LED_PRSN)
-#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
-#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
-#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
-#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
+#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_ABP)
+#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PCP)
+#define MRL_SENS(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_MRLSP)
+#define ATTN_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_AIP)
+#define PWR_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PIP)
+#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_HPS)
+#define EMI(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_EIP)
+#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_NCCS)
+#define PSN(ctrl) ((ctrl)->slot_cap >> 19)
extern int pciehp_sysfs_enable_slot(struct slot *slot);
extern int pciehp_sysfs_disable_slot(struct slot *slot);
extern u8 pciehp_handle_attention_button(struct slot *p_slot);
- extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_switch_change(struct slot *p_slot);
extern u8 pciehp_handle_presence_change(struct slot *p_slot);
extern u8 pciehp_handle_power_fault(struct slot *p_slot);
extern int pciehp_configure_device(struct slot *p_slot);
int pciehp_enable_slot(struct slot *p_slot);
int pciehp_disable_slot(struct slot *p_slot);
int pcie_enable_notification(struct controller *ctrl);
+int pciehp_power_on_slot(struct slot *slot);
+int pciehp_power_off_slot(struct slot *slot);
+int pciehp_get_power_status(struct slot *slot, u8 *status);
+int pciehp_get_attention_status(struct slot *slot, u8 *status);
+
+int pciehp_set_attention_status(struct slot *slot, u8 status);
+int pciehp_get_latch_status(struct slot *slot, u8 *status);
+int pciehp_get_adapter_status(struct slot *slot, u8 *status);
+int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *speed);
+int pciehp_get_max_link_width(struct slot *slot, enum pcie_link_width *val);
+int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *speed);
+int pciehp_get_cur_link_width(struct slot *slot, enum pcie_link_width *val);
+int pciehp_query_power_fault(struct slot *slot);
+void pciehp_green_led_on(struct slot *slot);
+void pciehp_green_led_off(struct slot *slot);
+void pciehp_green_led_blink(struct slot *slot);
+int pciehp_check_link_status(struct controller *ctrl);
+void pciehp_release_ctrl(struct controller *ctrl);
static inline const char *slot_name(struct slot *slot)
{
return hotplug_slot_name(slot->hotplug_slot);
}
-static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
-{
- struct slot *slot;
-
- list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
- if (slot->device == device)
- return slot;
- }
-
- ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device);
- return NULL;
-}
-
-struct hpc_ops {
- int (*power_on_slot)(struct slot *slot);
- int (*power_off_slot)(struct slot *slot);
- int (*get_power_status)(struct slot *slot, u8 *status);
- int (*get_attention_status)(struct slot *slot, u8 *status);
- int (*set_attention_status)(struct slot *slot, u8 status);
- int (*get_latch_status)(struct slot *slot, u8 *status);
- int (*get_adapter_status)(struct slot *slot, u8 *status);
- int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
- int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val);
- int (*get_cur_lnk_width)(struct slot *slot, enum pcie_link_width *val);
- int (*query_power_fault)(struct slot *slot);
- void (*green_led_on)(struct slot *slot);
- void (*green_led_off)(struct slot *slot);
- void (*green_led_blink)(struct slot *slot);
- void (*release_ctlr)(struct controller *ctrl);
- int (*check_lnk_status)(struct controller *ctrl);
-};
-
#ifdef CONFIG_ACPI
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#define PCIEHP_DETECT_AUTO (2)
#define PCIEHP_DETECT_DEFAULT PCIEHP_DETECT_AUTO
+struct dummy_slot {
+ u32 number;
+ struct list_head list;
+};
+
static int slot_detection_mode;
static char *pciehp_detect_mode;
module_param(pciehp_detect_mode, charp, 0444);
int pos;
u32 slot_cap;
acpi_handle handle;
- struct slot *slot, *tmp;
+ struct dummy_slot *slot, *tmp;
struct pci_dev *pdev = dev->port;
/* Note: pciehp_detect_mode != PCIEHP_DETECT_ACPI here */
if (pciehp_get_hp_hw_control_from_firmware(pdev))
if (!slot)
return -ENOMEM;
slot->number = slot_cap >> 19;
- list_for_each_entry(tmp, &dummy_slots, slot_list) {
+ list_for_each_entry(tmp, &dummy_slots, list) {
if (tmp->number == slot->number)
dup_slot_id++;
}
- list_add_tail(&slot->slot_list, &dummy_slots);
+ list_add_tail(&slot->list, &dummy_slots);
handle = DEVICE_ACPI_HANDLE(&pdev->dev);
if (!acpi_slot_detected && acpi_pci_detect_ejectable(handle))
acpi_slot_detected = 1;
static int __init select_detection_mode(void)
{
- struct slot *slot, *tmp;
+ struct dummy_slot *slot, *tmp;
pcie_port_service_register(&dummy_driver);
pcie_port_service_unregister(&dummy_driver);
- list_for_each_entry_safe(slot, tmp, &dummy_slots, slot_list) {
- list_del(&slot->slot_list);
+ list_for_each_entry_safe(slot, tmp, &dummy_slots, list) {
+ list_del(&slot->list);
kfree(slot);
}
if (acpi_slot_detected && dup_slot_id)
kfree(hotplug_slot);
}
-static int init_slots(struct controller *ctrl)
+static int init_slot(struct controller *ctrl)
{
- struct slot *slot;
- struct hotplug_slot *hotplug_slot;
- struct hotplug_slot_info *info;
+ struct slot *slot = ctrl->slot;
+ struct hotplug_slot *hotplug = NULL;
+ struct hotplug_slot_info *info = NULL;
char name[SLOT_NAME_SIZE];
int retval = -ENOMEM;
- list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
- hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
- if (!hotplug_slot)
- goto error;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto error_hpslot;
-
- /* register this slot with the hotplug pci core */
- hotplug_slot->info = info;
- hotplug_slot->private = slot;
- hotplug_slot->release = &release_slot;
- hotplug_slot->ops = &pciehp_hotplug_slot_ops;
- slot->hotplug_slot = hotplug_slot;
- snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
-
- ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
- "hp_slot=%x sun=%x slot_device_offset=%x\n",
- pci_domain_nr(ctrl->pci_dev->subordinate),
- slot->bus, slot->device, slot->hp_slot, slot->number,
- ctrl->slot_device_offset);
- retval = pci_hp_register(hotplug_slot,
- ctrl->pci_dev->subordinate,
- slot->device,
- name);
- if (retval) {
- ctrl_err(ctrl, "pci_hp_register failed with error %d\n",
- retval);
- goto error_info;
- }
- get_power_status(hotplug_slot, &info->power_status);
- get_attention_status(hotplug_slot, &info->attention_status);
- get_latch_status(hotplug_slot, &info->latch_status);
- get_adapter_status(hotplug_slot, &info->adapter_status);
+ hotplug = kzalloc(sizeof(*hotplug), GFP_KERNEL);
+ if (!hotplug)
+ goto out;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ goto out;
+
+ /* register this slot with the hotplug pci core */
+ hotplug->info = info;
+ hotplug->private = slot;
+ hotplug->release = &release_slot;
+ hotplug->ops = &pciehp_hotplug_slot_ops;
+ slot->hotplug_slot = hotplug;
+ snprintf(name, SLOT_NAME_SIZE, "%u", PSN(ctrl));
+
+ ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:00 sun=%x\n",
+ pci_domain_nr(ctrl->pcie->port->subordinate),
+ ctrl->pcie->port->subordinate->number, PSN(ctrl));
+ retval = pci_hp_register(hotplug,
+ ctrl->pcie->port->subordinate, 0, name);
+ if (retval) {
+ ctrl_err(ctrl,
+ "pci_hp_register failed with error %d\n", retval);
+ goto out;
+ }
+ get_power_status(hotplug, &info->power_status);
+ get_attention_status(hotplug, &info->attention_status);
+ get_latch_status(hotplug, &info->latch_status);
+ get_adapter_status(hotplug, &info->adapter_status);
+out:
+ if (retval) {
+ kfree(info);
+ kfree(hotplug);
}
-
- return 0;
-error_info:
- kfree(info);
-error_hpslot:
- kfree(hotplug_slot);
-error:
return retval;
}
-static void cleanup_slots(struct controller *ctrl)
+static void cleanup_slot(struct controller *ctrl)
{
- struct slot *slot;
- list_for_each_entry(slot, &ctrl->slot_list, slot_list)
- pci_hp_deregister(slot->hotplug_slot);
+ pci_hp_deregister(ctrl->slot->hotplug_slot);
}
/*
hotplug_slot->info->attention_status = status;
if (ATTN_LED(slot->ctrl))
- slot->hpc_ops->set_attention_status(slot, status);
+ pciehp_set_attention_status(slot, status);
return 0;
}
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_power_status(slot, value);
+ retval = pciehp_get_power_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->power_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_attention_status(slot, value);
+ retval = pciehp_get_attention_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->attention_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_latch_status(slot, value);
+ retval = pciehp_get_latch_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->latch_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_adapter_status(slot, value);
+ retval = pciehp_get_adapter_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->adapter_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_max_bus_speed(slot, value);
+ retval = pciehp_get_max_link_speed(slot, value);
if (retval < 0)
*value = PCI_SPEED_UNKNOWN;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
+ retval = pciehp_get_cur_link_speed(slot, value);
if (retval < 0)
*value = PCI_SPEED_UNKNOWN;
{
int rc;
struct controller *ctrl;
- struct slot *t_slot;
+ struct slot *slot;
u8 value;
struct pci_dev *pdev = dev->port;
set_service_data(dev, ctrl);
/* Setup the slot information structures */
- rc = init_slots(ctrl);
+ rc = init_slot(ctrl);
if (rc) {
if (rc == -EBUSY)
ctrl_warn(ctrl, "Slot already registered by another "
}
/* Check if slot is occupied */
- t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
- t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+ slot = ctrl->slot;
+ pciehp_get_adapter_status(slot, &value);
if (value) {
if (pciehp_force)
- pciehp_enable_slot(t_slot);
+ pciehp_enable_slot(slot);
} else {
/* Power off slot if not occupied */
if (POWER_CTRL(ctrl)) {
- rc = t_slot->hpc_ops->power_off_slot(t_slot);
+ rc = pciehp_power_off_slot(slot);
if (rc)
goto err_out_free_ctrl_slot;
}
return 0;
err_out_free_ctrl_slot:
- cleanup_slots(ctrl);
+ cleanup_slot(ctrl);
err_out_release_ctlr:
- ctrl->hpc_ops->release_ctlr(ctrl);
+ pciehp_release_ctrl(ctrl);
err_out_none:
return -ENODEV;
}
-static void pciehp_remove (struct pcie_device *dev)
+static void pciehp_remove(struct pcie_device *dev)
{
struct controller *ctrl = get_service_data(dev);
- cleanup_slots(ctrl);
- ctrl->hpc_ops->release_ctlr(ctrl);
+ cleanup_slot(ctrl);
+ pciehp_release_ctrl(ctrl);
}
#ifdef CONFIG_PM
dev_info(&dev->device, "%s ENTRY\n", __func__);
if (pciehp_force) {
struct controller *ctrl = get_service_data(dev);
- struct slot *t_slot;
+ struct slot *slot;
u8 status;
/* reinitialize the chipset's event detection logic */
pcie_enable_notification(ctrl);
- t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+ slot = ctrl->slot;
/* Check if slot is occupied */
- t_slot->hpc_ops->get_adapter_status(t_slot, &status);
+ pciehp_get_adapter_status(slot, &status);
if (status)
- pciehp_enable_slot(t_slot);
+ pciehp_enable_slot(slot);
else
- pciehp_disable_slot(t_slot);
+ pciehp_disable_slot(slot);
}
return 0;
}
/* Switch Change */
ctrl_dbg(ctrl, "Switch interrupt received\n");
- p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ pciehp_get_latch_status(p_slot, &getstatus);
if (getstatus) {
/*
* Switch opened
/* Switch is open, assume a presence change
* Save the presence state
*/
- p_slot->hpc_ops->get_adapter_status(p_slot, &presence_save);
+ pciehp_get_adapter_status(p_slot, &presence_save);
if (presence_save) {
/*
* Card Present
/* power fault */
ctrl_dbg(ctrl, "Power fault interrupt received\n");
- if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
+ if (!pciehp_query_power_fault(p_slot)) {
/*
* power fault Cleared
*/
{
/* turn off slot, turn on Amber LED, turn off Green LED if supported*/
if (POWER_CTRL(ctrl)) {
- if (pslot->hpc_ops->power_off_slot(pslot)) {
+ if (pciehp_power_off_slot(pslot)) {
ctrl_err(ctrl,
"Issue of Slot Power Off command failed\n");
return;
}
if (PWR_LED(ctrl))
- pslot->hpc_ops->green_led_off(pslot);
+ pciehp_green_led_off(pslot);
if (ATTN_LED(ctrl)) {
- if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
+ if (pciehp_set_attention_status(pslot, 1)) {
ctrl_err(ctrl,
"Issue of Set Attention Led command failed\n");
return;
{
int retval = 0;
struct controller *ctrl = p_slot->ctrl;
- struct pci_bus *parent = ctrl->pci_dev->subordinate;
-
- ctrl_dbg(ctrl, "%s: slot device, slot offset, hp slot = %d, %d, %d\n",
- __func__, p_slot->device, ctrl->slot_device_offset,
- p_slot->hp_slot);
+ struct pci_bus *parent = ctrl->pcie->port->subordinate;
if (POWER_CTRL(ctrl)) {
/* Power on slot */
- retval = p_slot->hpc_ops->power_on_slot(p_slot);
+ retval = pciehp_power_on_slot(p_slot);
if (retval)
return retval;
}
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_blink(p_slot);
+ pciehp_green_led_blink(p_slot);
/* Check link training status */
- retval = p_slot->hpc_ops->check_lnk_status(ctrl);
+ retval = pciehp_check_link_status(ctrl);
if (retval) {
ctrl_err(ctrl, "Failed to check link status\n");
set_slot_off(ctrl, p_slot);
}
/* Check for a power fault */
- if (p_slot->hpc_ops->query_power_fault(p_slot)) {
+ if (pciehp_query_power_fault(p_slot)) {
ctrl_dbg(ctrl, "Power fault detected\n");
- retval = POWER_FAILURE;
+ retval = -EIO;
goto err_exit;
}
retval = pciehp_configure_device(p_slot);
if (retval) {
- ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n",
- pci_domain_nr(parent), p_slot->bus, p_slot->device);
+ ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
+ pci_domain_nr(parent), parent->number);
goto err_exit;
}
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_on(p_slot);
+ pciehp_green_led_on(p_slot);
return 0;
if (retval)
return retval;
- ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, p_slot->hp_slot);
-
if (POWER_CTRL(ctrl)) {
/* power off slot */
- retval = p_slot->hpc_ops->power_off_slot(p_slot);
+ retval = pciehp_power_off_slot(p_slot);
if (retval) {
ctrl_err(ctrl,
"Issue of Slot Disable command failed\n");
msleep(1000);
}
+ /* turn off Green LED */
if (PWR_LED(ctrl))
- /* turn off Green LED */
- p_slot->hpc_ops->green_led_off(p_slot);
+ pciehp_green_led_off(p_slot);
return 0;
}
case POWEROFF_STATE:
mutex_unlock(&p_slot->lock);
ctrl_dbg(p_slot->ctrl,
- "Disabling domain:bus:device=%04x:%02x:%02x\n",
- pci_domain_nr(p_slot->ctrl->pci_dev->subordinate),
- p_slot->bus, p_slot->device);
+ "Disabling domain:bus:device=%04x:%02x:00\n",
+ pci_domain_nr(p_slot->ctrl->pcie->port->subordinate),
+ p_slot->ctrl->pcie->port->subordinate->number);
pciehp_disable_slot(p_slot);
mutex_lock(&p_slot->lock);
p_slot->state = STATIC_STATE;
break;
case POWERON_STATE:
mutex_unlock(&p_slot->lock);
- if (pciehp_enable_slot(p_slot) &&
- PWR_LED(p_slot->ctrl))
- p_slot->hpc_ops->green_led_off(p_slot);
+ if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl))
+ pciehp_green_led_off(p_slot);
mutex_lock(&p_slot->lock);
p_slot->state = STATIC_STATE;
break;
if (!info)
return -ENOMEM;
- slot->hpc_ops->get_power_status(slot, &(info->power_status));
- slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
- slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
- slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
+ pciehp_get_power_status(slot, &info->power_status);
+ pciehp_get_attention_status(slot, &info->attention_status);
+ pciehp_get_latch_status(slot, &info->latch_status);
+ pciehp_get_adapter_status(slot, &info->adapter_status);
result = pci_hp_change_slot_info(slot->hotplug_slot, info);
kfree (info);
switch (p_slot->state) {
case STATIC_STATE:
- p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ pciehp_get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
ctrl_info(ctrl,
}
/* blink green LED and turn off amber */
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_blink(p_slot);
+ pciehp_green_led_blink(p_slot);
if (ATTN_LED(ctrl))
- p_slot->hpc_ops->set_attention_status(p_slot, 0);
+ pciehp_set_attention_status(p_slot, 0);
schedule_delayed_work(&p_slot->work, 5*HZ);
break;
cancel_delayed_work(&p_slot->work);
if (p_slot->state == BLINKINGOFF_STATE) {
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_on(p_slot);
+ pciehp_green_led_on(p_slot);
} else {
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_off(p_slot);
+ pciehp_green_led_off(p_slot);
}
if (ATTN_LED(ctrl))
- p_slot->hpc_ops->set_attention_status(p_slot, 0);
+ pciehp_set_attention_status(p_slot, 0);
ctrl_info(ctrl, "PCI slot #%s - action canceled "
"due to button press\n", slot_name(p_slot));
p_slot->state = STATIC_STATE;
info->p_slot = p_slot;
INIT_WORK(&info->work, pciehp_power_thread);
- p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ pciehp_get_adapter_status(p_slot, &getstatus);
if (!getstatus)
p_slot->state = POWEROFF_STATE;
else
if (!POWER_CTRL(ctrl))
break;
if (ATTN_LED(ctrl))
- p_slot->hpc_ops->set_attention_status(p_slot, 1);
+ pciehp_set_attention_status(p_slot, 1);
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_off(p_slot);
+ pciehp_green_led_off(p_slot);
break;
case INT_PRESENCE_ON:
case INT_PRESENCE_OFF:
int rc;
struct controller *ctrl = p_slot->ctrl;
- /* Check to see if (latch closed, card present, power off) */
- mutex_lock(&p_slot->ctrl->crit_sect);
-
- rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ rc = pciehp_get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (MRL_SENS(p_slot->ctrl)) {
- rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ rc = pciehp_get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
ctrl_info(ctrl, "Latch open on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
}
if (POWER_CTRL(p_slot->ctrl)) {
- rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ rc = pciehp_get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
ctrl_info(ctrl, "Already enabled on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
}
- p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ pciehp_get_latch_status(p_slot, &getstatus);
rc = board_added(p_slot);
if (rc) {
- p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ pciehp_get_latch_status(p_slot, &getstatus);
}
update_slot_info(p_slot);
- mutex_unlock(&p_slot->ctrl->crit_sect);
return rc;
}
if (!p_slot->ctrl)
return 1;
- /* Check to see if (latch closed, card present, power on) */
- mutex_lock(&p_slot->ctrl->crit_sect);
-
if (!HP_SUPR_RM(p_slot->ctrl)) {
- ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ ret = pciehp_get_adapter_status(p_slot, &getstatus);
if (ret || !getstatus) {
ctrl_info(ctrl, "No adapter on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
}
if (MRL_SENS(p_slot->ctrl)) {
- ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ ret = pciehp_get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
ctrl_info(ctrl, "Latch open on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
}
if (POWER_CTRL(p_slot->ctrl)) {
- ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ ret = pciehp_get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
ctrl_info(ctrl, "Already disabled on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
}
ret = remove_board(p_slot);
update_slot_info(p_slot);
- mutex_unlock(&p_slot->ctrl->crit_sect);
return ret;
}
static inline int pciehp_readw(struct controller *ctrl, int reg, u16 *value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_read_config_word(dev, ctrl->cap_base + reg, value);
}
static inline int pciehp_readl(struct controller *ctrl, int reg, u32 *value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_read_config_dword(dev, ctrl->cap_base + reg, value);
}
static inline int pciehp_writew(struct controller *ctrl, int reg, u16 value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_write_config_word(dev, ctrl->cap_base + reg, value);
}
static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_write_config_dword(dev, ctrl->cap_base + reg, value);
}
ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n");
}
-static int hpc_check_lnk_status(struct controller *ctrl)
+int pciehp_check_link_status(struct controller *ctrl)
{
u16 lnk_status;
int retval = 0;
return retval;
}
-static int hpc_get_attention_status(struct slot *slot, u8 *status)
+int pciehp_get_attention_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_ctrl;
return 0;
}
-static int hpc_get_power_status(struct slot *slot, u8 *status)
+int pciehp_get_power_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_ctrl;
return retval;
}
-static int hpc_get_latch_status(struct slot *slot, u8 *status)
+int pciehp_get_latch_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_status;
return 0;
}
-static int hpc_get_adapter_status(struct slot *slot, u8 *status)
+int pciehp_get_adapter_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_status;
return 0;
}
-static int hpc_query_power_fault(struct slot *slot)
+int pciehp_query_power_fault(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_status;
return !!(slot_status & PCI_EXP_SLTSTA_PFD);
}
-static int hpc_set_attention_status(struct slot *slot, u8 value)
+int pciehp_set_attention_status(struct slot *slot, u8 value)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
return rc;
}
-static void hpc_set_green_led_on(struct slot *slot)
+void pciehp_green_led_on(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
}
-static void hpc_set_green_led_off(struct slot *slot)
+void pciehp_green_led_off(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
}
-static void hpc_set_green_led_blink(struct slot *slot)
+void pciehp_green_led_blink(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
}
-static int hpc_power_on_slot(struct slot * slot)
+int pciehp_power_on_slot(struct slot * slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 slot_status;
int retval = 0;
- ctrl_dbg(ctrl, "%s: slot->hp_slot %x\n", __func__, slot->hp_slot);
-
/* Clear sticky power-fault bit from previous power failures */
retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
if (retval) {
static inline int pcie_mask_bad_dllp(struct controller *ctrl)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
int pos;
u32 reg;
static inline void pcie_unmask_bad_dllp(struct controller *ctrl)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
u32 reg;
int pos;
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
}
-static int hpc_power_off_slot(struct slot * slot)
+int pciehp_power_off_slot(struct slot * slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
int retval = 0;
int changed;
- ctrl_dbg(ctrl, "%s: slot->hp_slot %x\n", __func__, slot->hp_slot);
-
/*
* Set Bad DLLP Mask bit in Correctable Error Mask
* Register. This is the workaround against Bad DLLP error
static irqreturn_t pcie_isr(int irq, void *dev_id)
{
struct controller *ctrl = (struct controller *)dev_id;
+ struct slot *slot = ctrl->slot;
u16 detected, intr_loc;
- struct slot *p_slot;
/*
* In order to guarantee that all interrupt events are
if (!(intr_loc & ~PCI_EXP_SLTSTA_CC))
return IRQ_HANDLED;
- p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
/* Check MRL Sensor Changed */
if (intr_loc & PCI_EXP_SLTSTA_MRLSC)
- pciehp_handle_switch_change(p_slot);
+ pciehp_handle_switch_change(slot);
/* Check Attention Button Pressed */
if (intr_loc & PCI_EXP_SLTSTA_ABP)
- pciehp_handle_attention_button(p_slot);
+ pciehp_handle_attention_button(slot);
/* Check Presence Detect Changed */
if (intr_loc & PCI_EXP_SLTSTA_PDC)
- pciehp_handle_presence_change(p_slot);
+ pciehp_handle_presence_change(slot);
/* Check Power Fault Detected */
if ((intr_loc & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
ctrl->power_fault_detected = 1;
- pciehp_handle_power_fault(p_slot);
+ pciehp_handle_power_fault(slot);
}
return IRQ_HANDLED;
}
-static int hpc_get_max_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
+int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
{
struct controller *ctrl = slot->ctrl;
enum pcie_link_speed lnk_speed;
return retval;
}
-static int hpc_get_max_lnk_width(struct slot *slot,
+int pciehp_get_max_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
struct controller *ctrl = slot->ctrl;
return retval;
}
-static int hpc_get_cur_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
+int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
{
struct controller *ctrl = slot->ctrl;
enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
return retval;
}
-static int hpc_get_cur_lnk_width(struct slot *slot,
+int pciehp_get_cur_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
struct controller *ctrl = slot->ctrl;
return retval;
}
-static void pcie_release_ctrl(struct controller *ctrl);
-static struct hpc_ops pciehp_hpc_ops = {
- .power_on_slot = hpc_power_on_slot,
- .power_off_slot = hpc_power_off_slot,
- .set_attention_status = hpc_set_attention_status,
- .get_power_status = hpc_get_power_status,
- .get_attention_status = hpc_get_attention_status,
- .get_latch_status = hpc_get_latch_status,
- .get_adapter_status = hpc_get_adapter_status,
-
- .get_max_bus_speed = hpc_get_max_lnk_speed,
- .get_cur_bus_speed = hpc_get_cur_lnk_speed,
- .get_max_lnk_width = hpc_get_max_lnk_width,
- .get_cur_lnk_width = hpc_get_cur_lnk_width,
-
- .query_power_fault = hpc_query_power_fault,
- .green_led_on = hpc_set_green_led_on,
- .green_led_off = hpc_set_green_led_off,
- .green_led_blink = hpc_set_green_led_blink,
-
- .release_ctlr = pcie_release_ctrl,
- .check_lnk_status = hpc_check_lnk_status,
-};
-
int pcie_enable_notification(struct controller *ctrl)
{
u16 cmd, mask;
if (!slot)
return -ENOMEM;
- slot->hp_slot = 0;
slot->ctrl = ctrl;
- slot->bus = ctrl->pci_dev->subordinate->number;
- slot->device = ctrl->slot_device_offset + slot->hp_slot;
- slot->hpc_ops = ctrl->hpc_ops;
- slot->number = ctrl->first_slot;
mutex_init(&slot->lock);
INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
- list_add(&slot->slot_list, &ctrl->slot_list);
+ ctrl->slot = slot;
return 0;
}
static void pcie_cleanup_slot(struct controller *ctrl)
{
- struct slot *slot;
- slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list);
- list_del(&slot->slot_list);
+ struct slot *slot = ctrl->slot;
cancel_delayed_work(&slot->work);
flush_scheduled_work();
flush_workqueue(pciehp_wq);
{
int i;
u16 reg16;
- struct pci_dev *pdev = ctrl->pci_dev;
+ struct pci_dev *pdev = ctrl->pcie->port;
if (!pciehp_debug)
return;
(unsigned long long)pci_resource_start(pdev, i));
}
ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
- ctrl_info(ctrl, " Physical Slot Number : %d\n", ctrl->first_slot);
+ ctrl_info(ctrl, " Physical Slot Number : %d\n", PSN(ctrl));
ctrl_info(ctrl, " Attention Button : %3s\n",
ATTN_BUTTN(ctrl) ? "yes" : "no");
ctrl_info(ctrl, " Power Controller : %3s\n",
dev_err(&dev->device, "%s: Out of memory\n", __func__);
goto abort;
}
- INIT_LIST_HEAD(&ctrl->slot_list);
-
ctrl->pcie = dev;
- ctrl->pci_dev = pdev;
ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!ctrl->cap_base) {
ctrl_err(ctrl, "Cannot find PCI Express capability\n");
}
ctrl->slot_cap = slot_cap;
- ctrl->first_slot = slot_cap >> 19;
- ctrl->slot_device_offset = 0;
- ctrl->num_slots = 1;
- ctrl->hpc_ops = &pciehp_hpc_ops;
- mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->ctrl_lock);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
return NULL;
}
-void pcie_release_ctrl(struct controller *ctrl)
+void pciehp_release_ctrl(struct controller *ctrl)
{
pcie_shutdown_notification(ctrl);
pcie_cleanup_slot(ctrl);
int pciehp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
- struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+ struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
int num, fn;
struct controller *ctrl = p_slot->ctrl;
- dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
+ dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
if (dev) {
ctrl_err(ctrl, "Device %s already exists "
- "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
- pci_domain_nr(parent), p_slot->bus, p_slot->device);
+ "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
+ pci_domain_nr(parent), parent->number);
pci_dev_put(dev);
return -EINVAL;
}
- num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
+ num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
if (num == 0) {
ctrl_err(ctrl, "No new device found\n");
return -ENODEV;
}
for (fn = 0; fn < 8; fn++) {
- dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
+ dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
if (!dev)
continue;
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
int j;
u8 bctl = 0;
u8 presence = 0;
- struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+ struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
u16 command;
struct controller *ctrl = p_slot->ctrl;
- ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
- __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
- ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
+ ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
+ __func__, pci_domain_nr(parent), parent->number);
+ ret = pciehp_get_adapter_status(p_slot, &presence);
if (ret)
presence = 0;
for (j = 0; j < 8; j++) {
- struct pci_dev* temp = pci_get_slot(parent,
- (p_slot->device << 3) | j);
+ struct pci_dev* temp = pci_get_slot(parent, PCI_DEVFN(0, j));
if (!temp)
continue;
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
{
if (pcie_aer_disable)
return -ENXIO;
+ if (!pci_msi_enabled())
+ return -ENXIO;
return pcie_port_service_register(&aerdriver);
}
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32);
info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
- /* 00b and 10b are defined as "Reserved". */
- if (info->support == PCIE_LINK_STATE_L1)
- info->support = 0;
info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
+pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o
pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
return soc_common_drv_pcmcia_remove(&dev->dev);
}
-static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_drv_pcmcia_suspend(struct device *dev)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(dev, PMSG_SUSPEND);
}
-static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
{
- pxa2xx_configure_sockets(&dev->dev);
- return pcmcia_socket_dev_resume(&dev->dev);
+ pxa2xx_configure_sockets(dev);
+ return pcmcia_socket_dev_resume(dev);
}
+static struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = {
+ .suspend = pxa2xx_drv_pcmcia_suspend,
+ .resume = pxa2xx_drv_pcmcia_resume,
+};
+
static struct platform_driver pxa2xx_pcmcia_driver = {
.probe = pxa2xx_drv_pcmcia_probe,
.remove = pxa2xx_drv_pcmcia_remove,
- .suspend = pxa2xx_drv_pcmcia_suspend,
- .resume = pxa2xx_drv_pcmcia_resume,
.driver = {
.name = "pxa2xx-pcmcia",
.owner = THIS_MODULE,
+ .pm = &pxa2xx_drv_pcmcia_pm_ops,
},
};
--- /dev/null
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmtc.c
+ *
+ * Driver for Palm Tungsten|C PCMCIA
+ *
+ * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <mach/palmtc.h>
+#include "soc_common.h"
+
+static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+ if (ret)
+ goto err4;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
+ if (ret)
+ goto err4;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+ if (ret)
+ goto err5;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
+ if (ret)
+ goto err5;
+ ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
+ if (ret)
+ goto err6;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
+ if (ret)
+ goto err6;
+ ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+ if (ret)
+ goto err7;
+
+ skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+ return 0;
+
+err7:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+err6:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+err5:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+err4:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+err3:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+err2:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+err1:
+ return ret;
+}
+
+static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+}
+
+static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = 1; /* always inserted */
+ state->ready = !!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_READY);
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0;
+ state->vs_3v = 1;
+ state->vs_Xv = 0;
+}
+
+static int palmtc_wifi_powerdown(void)
+{
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+ mdelay(40);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+ return 0;
+}
+
+static int palmtc_wifi_powerup(void)
+{
+ int timeout = 50;
+
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
+ mdelay(50);
+
+ /* Power up the card, 1.8V first, after a while 3.3V */
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
+ mdelay(100);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
+
+ /* Wait till the card is ready */
+ while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
+ timeout) {
+ mdelay(1);
+ timeout--;
+ }
+
+ /* Power down the WiFi in case of error */
+ if (!timeout) {
+ palmtc_wifi_powerdown();
+ return 1;
+ }
+
+ /* Reset the card */
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+ mdelay(20);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
+ mdelay(25);
+
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+
+ return 0;
+}
+
+static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ int ret = 1;
+
+ if (state->Vcc == 0)
+ ret = palmtc_wifi_powerdown();
+ else if (state->Vcc == 33)
+ ret = palmtc_wifi_powerup();
+
+ return ret;
+}
+
+static void palmtc_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmtc_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmtc_pcmcia_ops = {
+ .owner = THIS_MODULE,
+
+ .first = 0,
+ .nr = 1,
+
+ .hw_init = palmtc_pcmcia_hw_init,
+ .hw_shutdown = palmtc_pcmcia_hw_shutdown,
+
+ .socket_state = palmtc_pcmcia_socket_state,
+ .configure_socket = palmtc_pcmcia_configure_socket,
+
+ .socket_init = palmtc_pcmcia_socket_init,
+ .socket_suspend = palmtc_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmtc_pcmcia_device;
+
+static int __init palmtc_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_palmtc())
+ return -ENODEV;
+
+ palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!palmtc_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
+ sizeof(palmtc_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(palmtc_pcmcia_device);
+
+ if (ret)
+ platform_device_put(palmtc_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit palmtc_pcmcia_exit(void)
+{
+ platform_device_unregister(palmtc_pcmcia_device);
+}
+
+module_init(palmtc_pcmcia_init);
+module_exit(palmtc_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+ " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
return AE_BAD_PARAMETER;
if (quirks->mailled == 1) {
param = value ? 0x92 : 0x93;
+ i8042_lock_chip();
i8042_command(¶m, 0x1059);
+ i8042_unlock_chip();
return 0;
}
break;
*/
#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020400
+#define TPACPI_SYSFS_VERSION 0x020500
/*
* Changelog:
TP_ACPI_WGSV_STATE_UWBPWR = 0x0020, /* UWB radio enabled */
};
+/* HKEY events */
+enum tpacpi_hkey_event_t {
+ /* Hotkey-related */
+ TP_HKEY_EV_HOTKEY_BASE = 0x1001, /* first hotkey (FN+F1) */
+ TP_HKEY_EV_BRGHT_UP = 0x1010, /* Brightness up */
+ TP_HKEY_EV_BRGHT_DOWN = 0x1011, /* Brightness down */
+ TP_HKEY_EV_VOL_UP = 0x1015, /* Volume up or unmute */
+ TP_HKEY_EV_VOL_DOWN = 0x1016, /* Volume down or unmute */
+ TP_HKEY_EV_VOL_MUTE = 0x1017, /* Mixer output mute */
+
+ /* Reasons for waking up from S3/S4 */
+ TP_HKEY_EV_WKUP_S3_UNDOCK = 0x2304, /* undock requested, S3 */
+ TP_HKEY_EV_WKUP_S4_UNDOCK = 0x2404, /* undock requested, S4 */
+ TP_HKEY_EV_WKUP_S3_BAYEJ = 0x2305, /* bay ejection req, S3 */
+ TP_HKEY_EV_WKUP_S4_BAYEJ = 0x2405, /* bay ejection req, S4 */
+ TP_HKEY_EV_WKUP_S3_BATLOW = 0x2313, /* battery empty, S3 */
+ TP_HKEY_EV_WKUP_S4_BATLOW = 0x2413, /* battery empty, S4 */
+
+ /* Auto-sleep after eject request */
+ TP_HKEY_EV_BAYEJ_ACK = 0x3003, /* bay ejection complete */
+ TP_HKEY_EV_UNDOCK_ACK = 0x4003, /* undock complete */
+
+ /* Misc bay events */
+ TP_HKEY_EV_OPTDRV_EJ = 0x3006, /* opt. drive tray ejected */
+
+ /* User-interface events */
+ TP_HKEY_EV_LID_CLOSE = 0x5001, /* laptop lid closed */
+ TP_HKEY_EV_LID_OPEN = 0x5002, /* laptop lid opened */
+ TP_HKEY_EV_TABLET_TABLET = 0x5009, /* tablet swivel up */
+ TP_HKEY_EV_TABLET_NOTEBOOK = 0x500a, /* tablet swivel down */
+ TP_HKEY_EV_PEN_INSERTED = 0x500b, /* tablet pen inserted */
+ TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */
+ TP_HKEY_EV_BRGHT_CHANGED = 0x5010, /* backlight control event */
+
+ /* Thermal events */
+ TP_HKEY_EV_ALARM_BAT_HOT = 0x6011, /* battery too hot */
+ TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */
+ TP_HKEY_EV_ALARM_SENSOR_HOT = 0x6021, /* sensor too hot */
+ TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */
+ TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* thermal table changed */
+
+ /* Misc */
+ TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */
+};
+
/****************************************************************************
* Main driver
*/
* Hotkey subdriver
*/
+/*
+ * ThinkPad firmware event model
+ *
+ * The ThinkPad firmware has two main event interfaces: normal ACPI
+ * notifications (which follow the ACPI standard), and a private event
+ * interface.
+ *
+ * The private event interface also issues events for the hotkeys. As
+ * the driver gained features, the event handling code ended up being
+ * built around the hotkey subdriver. This will need to be refactored
+ * to a more formal event API eventually.
+ *
+ * Some "hotkeys" are actually supposed to be used as event reports,
+ * such as "brightness has changed", "volume has changed", depending on
+ * the ThinkPad model and how the firmware is operating.
+ *
+ * Unlike other classes, hotkey-class events have mask/unmask control on
+ * non-ancient firmware. However, how it behaves changes a lot with the
+ * firmware model and version.
+ */
+
enum { /* hot key scan codes (derived from ACPI DSDT) */
TP_ACPI_HOTKEYSCAN_FNF1 = 0,
TP_ACPI_HOTKEYSCAN_FNF2,
TP_ACPI_HOTKEYSCAN_THINKPAD,
};
-enum { /* Keys available through NVRAM polling */
+enum { /* Keys/events available through NVRAM polling */
TPACPI_HKEY_NVRAM_KNOWN_MASK = 0x00fb88c0U,
TPACPI_HKEY_NVRAM_GOOD_MASK = 0x00fb8000U,
};
static struct mutex hotkey_thread_mutex;
/*
- * Acquire mutex to write poller control variables.
- * Increment hotkey_config_change when changing them.
+ * Acquire mutex to write poller control variables as an
+ * atomic block.
+ *
+ * Increment hotkey_config_change when changing them if you
+ * want the kthread to forget old state.
*
* See HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
*/
* hotkey poller control variables
*
* Must be atomic or readers will also need to acquire mutex
+ *
+ * HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
+ * should be used only when the changes need to be taken as
+ * a block, OR when one needs to force the kthread to forget
+ * old state.
*/
static u32 hotkey_source_mask; /* bit mask 0=ACPI,1=NVRAM */
static unsigned int hotkey_poll_freq = 10; /* Hz */
static int hotkey_autosleep_ack;
-static u32 hotkey_orig_mask;
-static u32 hotkey_all_mask;
-static u32 hotkey_reserved_mask;
-static u32 hotkey_mask;
+static u32 hotkey_orig_mask; /* events the BIOS had enabled */
+static u32 hotkey_all_mask; /* all events supported in fw */
+static u32 hotkey_reserved_mask; /* events better left disabled */
+static u32 hotkey_driver_mask; /* events needed by the driver */
+static u32 hotkey_user_mask; /* events visible to userspace */
+static u32 hotkey_acpi_mask; /* events enabled in firmware */
static unsigned int hotkey_report_mode;
static struct attribute_set *hotkey_dev_attributes;
+static void tpacpi_driver_event(const unsigned int hkey_event);
+static void hotkey_driver_event(const unsigned int scancode);
+
/* HKEY.MHKG() return bits */
#define TP_HOTKEY_TABLET_MASK (1 << 3)
}
/*
+ * Reads current event mask from firmware, and updates
+ * hotkey_acpi_mask accordingly. Also resets any bits
+ * from hotkey_user_mask that are unavailable to be
+ * delivered (shadow requirement of the userspace ABI).
+ *
* Call with hotkey_mutex held
*/
static int hotkey_mask_get(void)
{
- u32 m = 0;
-
if (tp_features.hotkey_mask) {
+ u32 m = 0;
+
if (!acpi_evalf(hkey_handle, &m, "DHKN", "d"))
return -EIO;
+
+ hotkey_acpi_mask = m;
+ } else {
+ /* no mask support doesn't mean no event support... */
+ hotkey_acpi_mask = hotkey_all_mask;
}
- HOTKEY_CONFIG_CRITICAL_START
- hotkey_mask = m | (hotkey_source_mask & hotkey_mask);
- HOTKEY_CONFIG_CRITICAL_END
+
+ /* sync userspace-visible mask */
+ hotkey_user_mask &= (hotkey_acpi_mask | hotkey_source_mask);
return 0;
}
+void static hotkey_mask_warn_incomplete_mask(void)
+{
+ /* log only what the user can fix... */
+ const u32 wantedmask = hotkey_driver_mask &
+ ~(hotkey_acpi_mask | hotkey_source_mask) &
+ (hotkey_all_mask | TPACPI_HKEY_NVRAM_KNOWN_MASK);
+
+ if (wantedmask)
+ printk(TPACPI_NOTICE
+ "required events 0x%08x not enabled!\n",
+ wantedmask);
+}
+
/*
+ * Set the firmware mask when supported
+ *
+ * Also calls hotkey_mask_get to update hotkey_acpi_mask.
+ *
+ * NOTE: does not set bits in hotkey_user_mask, but may reset them.
+ *
* Call with hotkey_mutex held
*/
static int hotkey_mask_set(u32 mask)
int i;
int rc = 0;
- if (tp_features.hotkey_mask) {
- if (!tp_warned.hotkey_mask_ff &&
- (mask == 0xffff || mask == 0xffffff ||
- mask == 0xffffffff)) {
- tp_warned.hotkey_mask_ff = 1;
- printk(TPACPI_NOTICE
- "setting the hotkey mask to 0x%08x is likely "
- "not the best way to go about it\n", mask);
- printk(TPACPI_NOTICE
- "please consider using the driver defaults, "
- "and refer to up-to-date thinkpad-acpi "
- "documentation\n");
- }
+ const u32 fwmask = mask & ~hotkey_source_mask;
- HOTKEY_CONFIG_CRITICAL_START
+ if (tp_features.hotkey_mask) {
for (i = 0; i < 32; i++) {
- u32 m = 1 << i;
- /* enable in firmware mask only keys not in NVRAM
- * mode, but enable the key in the cached hotkey_mask
- * regardless of mode, or the key will end up
- * disabled by hotkey_mask_get() */
if (!acpi_evalf(hkey_handle,
NULL, "MHKM", "vdd", i + 1,
- !!((mask & ~hotkey_source_mask) & m))) {
+ !!(mask & (1 << i)))) {
rc = -EIO;
break;
- } else {
- hotkey_mask = (hotkey_mask & ~m) | (mask & m);
}
}
- HOTKEY_CONFIG_CRITICAL_END
+ }
- /* hotkey_mask_get must be called unconditionally below */
- if (!hotkey_mask_get() && !rc &&
- (hotkey_mask & ~hotkey_source_mask) !=
- (mask & ~hotkey_source_mask)) {
- printk(TPACPI_NOTICE
- "requested hot key mask 0x%08x, but "
- "firmware forced it to 0x%08x\n",
- mask, hotkey_mask);
- }
- } else {
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- HOTKEY_CONFIG_CRITICAL_START
- hotkey_mask = mask & hotkey_source_mask;
- HOTKEY_CONFIG_CRITICAL_END
- hotkey_mask_get();
- if (hotkey_mask != mask) {
- printk(TPACPI_NOTICE
- "requested hot key mask 0x%08x, "
- "forced to 0x%08x (NVRAM poll mask is "
- "0x%08x): no firmware mask support\n",
- mask, hotkey_mask, hotkey_source_mask);
- }
-#else
- hotkey_mask_get();
- rc = -ENXIO;
-#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
+ /*
+ * We *must* make an inconditional call to hotkey_mask_get to
+ * refresh hotkey_acpi_mask and update hotkey_user_mask
+ *
+ * Take the opportunity to also log when we cannot _enable_
+ * a given event.
+ */
+ if (!hotkey_mask_get() && !rc && (fwmask & ~hotkey_acpi_mask)) {
+ printk(TPACPI_NOTICE
+ "asked for hotkey mask 0x%08x, but "
+ "firmware forced it to 0x%08x\n",
+ fwmask, hotkey_acpi_mask);
}
+ hotkey_mask_warn_incomplete_mask();
+
+ return rc;
+}
+
+/*
+ * Sets hotkey_user_mask and tries to set the firmware mask
+ *
+ * Call with hotkey_mutex held
+ */
+static int hotkey_user_mask_set(const u32 mask)
+{
+ int rc;
+
+ /* Give people a chance to notice they are doing something that
+ * is bound to go boom on their users sooner or later */
+ if (!tp_warned.hotkey_mask_ff &&
+ (mask == 0xffff || mask == 0xffffff ||
+ mask == 0xffffffff)) {
+ tp_warned.hotkey_mask_ff = 1;
+ printk(TPACPI_NOTICE
+ "setting the hotkey mask to 0x%08x is likely "
+ "not the best way to go about it\n", mask);
+ printk(TPACPI_NOTICE
+ "please consider using the driver defaults, "
+ "and refer to up-to-date thinkpad-acpi "
+ "documentation\n");
+ }
+
+ /* Try to enable what the user asked for, plus whatever we need.
+ * this syncs everything but won't enable bits in hotkey_user_mask */
+ rc = hotkey_mask_set((mask | hotkey_driver_mask) & ~hotkey_source_mask);
+
+ /* Enable the available bits in hotkey_user_mask */
+ hotkey_user_mask = mask & (hotkey_acpi_mask | hotkey_source_mask);
+
+ return rc;
+}
+
+/*
+ * Sets the driver hotkey mask.
+ *
+ * Can be called even if the hotkey subdriver is inactive
+ */
+static int tpacpi_hotkey_driver_mask_set(const u32 mask)
+{
+ int rc;
+
+ /* Do the right thing if hotkey_init has not been called yet */
+ if (!tp_features.hotkey) {
+ hotkey_driver_mask = mask;
+ return 0;
+ }
+
+ mutex_lock(&hotkey_mutex);
+
+ HOTKEY_CONFIG_CRITICAL_START
+ hotkey_driver_mask = mask;
+ hotkey_source_mask |= (mask & ~hotkey_all_mask);
+ HOTKEY_CONFIG_CRITICAL_END
+
+ rc = hotkey_mask_set((hotkey_acpi_mask | hotkey_driver_mask) &
+ ~hotkey_source_mask);
+ mutex_unlock(&hotkey_mutex);
+
return rc;
}
}
}
-static void tpacpi_input_send_key(unsigned int scancode)
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key(const unsigned int scancode)
{
- unsigned int keycode;
-
- keycode = hotkey_keycode_map[scancode];
+ const unsigned int keycode = hotkey_keycode_map[scancode];
if (keycode != KEY_RESERVED) {
mutex_lock(&tpacpi_inputdev_send_mutex);
}
}
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key_masked(const unsigned int scancode)
+{
+ hotkey_driver_event(scancode);
+ if (hotkey_user_mask & (1 << scancode))
+ tpacpi_input_send_key(scancode);
+}
+
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
static struct tp_acpi_drv_struct ibm_hotkey_acpidriver;
+/* Do NOT call without validating scancode first */
static void tpacpi_hotkey_send_key(unsigned int scancode)
{
- tpacpi_input_send_key(scancode);
+ tpacpi_input_send_key_masked(scancode);
if (hotkey_report_mode < 2) {
acpi_bus_generate_proc_event(ibm_hotkey_acpidriver.device,
- 0x80, 0x1001 + scancode);
+ 0x80, TP_HKEY_EV_HOTKEY_BASE + scancode);
}
}
-static void hotkey_read_nvram(struct tp_nvram_state *n, u32 m)
+static void hotkey_read_nvram(struct tp_nvram_state *n, const u32 m)
{
u8 d;
}
}
+static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
+ struct tp_nvram_state *newn,
+ const u32 event_mask)
+{
+
#define TPACPI_COMPARE_KEY(__scancode, __member) \
do { \
- if ((mask & (1 << __scancode)) && \
+ if ((event_mask & (1 << __scancode)) && \
oldn->__member != newn->__member) \
- tpacpi_hotkey_send_key(__scancode); \
+ tpacpi_hotkey_send_key(__scancode); \
} while (0)
#define TPACPI_MAY_SEND_KEY(__scancode) \
- do { if (mask & (1 << __scancode)) \
- tpacpi_hotkey_send_key(__scancode); } while (0)
+ do { \
+ if (event_mask & (1 << __scancode)) \
+ tpacpi_hotkey_send_key(__scancode); \
+ } while (0)
-static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
- struct tp_nvram_state *newn,
- u32 mask)
-{
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_THINKPAD, thinkpad_toggle);
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNSPACE, zoom_toggle);
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNF7, display_toggle);
}
}
}
-}
#undef TPACPI_COMPARE_KEY
#undef TPACPI_MAY_SEND_KEY
+}
+/*
+ * Polling driver
+ *
+ * We track all events in hotkey_source_mask all the time, since
+ * most of them are edge-based. We only issue those requested by
+ * hotkey_user_mask or hotkey_driver_mask, though.
+ */
static int hotkey_kthread(void *data)
{
struct tp_nvram_state s[2];
- u32 mask;
+ u32 poll_mask, event_mask;
unsigned int si, so;
unsigned long t;
unsigned int change_detector, must_reset;
/* Initial state for compares */
mutex_lock(&hotkey_thread_data_mutex);
change_detector = hotkey_config_change;
- mask = hotkey_source_mask & hotkey_mask;
+ poll_mask = hotkey_source_mask;
+ event_mask = hotkey_source_mask &
+ (hotkey_driver_mask | hotkey_user_mask);
poll_freq = hotkey_poll_freq;
mutex_unlock(&hotkey_thread_data_mutex);
- hotkey_read_nvram(&s[so], mask);
+ hotkey_read_nvram(&s[so], poll_mask);
while (!kthread_should_stop()) {
if (t == 0) {
t = 0;
change_detector = hotkey_config_change;
}
- mask = hotkey_source_mask & hotkey_mask;
+ poll_mask = hotkey_source_mask;
+ event_mask = hotkey_source_mask &
+ (hotkey_driver_mask | hotkey_user_mask);
poll_freq = hotkey_poll_freq;
mutex_unlock(&hotkey_thread_data_mutex);
- if (likely(mask)) {
- hotkey_read_nvram(&s[si], mask);
+ if (likely(poll_mask)) {
+ hotkey_read_nvram(&s[si], poll_mask);
if (likely(si != so)) {
hotkey_compare_and_issue_event(&s[so], &s[si],
- mask);
+ event_mask);
}
}
/* call with hotkey_mutex held */
static void hotkey_poll_setup(bool may_warn)
{
- u32 hotkeys_to_poll = hotkey_source_mask & hotkey_mask;
+ const u32 poll_driver_mask = hotkey_driver_mask & hotkey_source_mask;
+ const u32 poll_user_mask = hotkey_user_mask & hotkey_source_mask;
- if (hotkeys_to_poll != 0 && hotkey_poll_freq > 0 &&
- (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) {
+ if (hotkey_poll_freq > 0 &&
+ (poll_driver_mask ||
+ (poll_user_mask && tpacpi_inputdev->users > 0))) {
if (!tpacpi_hotkey_task) {
tpacpi_hotkey_task = kthread_run(hotkey_kthread,
NULL, TPACPI_NVRAM_KTHREAD_NAME);
}
} else {
hotkey_poll_stop_sync();
- if (may_warn && hotkeys_to_poll != 0 &&
+ if (may_warn && (poll_driver_mask || poll_user_mask) &&
hotkey_poll_freq == 0) {
printk(TPACPI_NOTICE
- "hot keys 0x%08x require polling, "
- "which is currently disabled\n",
- hotkeys_to_poll);
+ "hot keys 0x%08x and/or events 0x%08x "
+ "require polling, which is currently "
+ "disabled\n",
+ poll_user_mask, poll_driver_mask);
}
}
}
if (!freq)
hotkey_poll_stop_sync();
- HOTKEY_CONFIG_CRITICAL_START
hotkey_poll_freq = freq;
- HOTKEY_CONFIG_CRITICAL_END
}
#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
static void hotkey_inputdev_close(struct input_dev *dev)
{
/* disable hotkey polling when possible */
- if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING)
+ if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING &&
+ !(hotkey_source_mask & hotkey_driver_mask))
hotkey_poll_setup_safe(false);
}
struct device_attribute *attr,
char *buf)
{
- int res;
-
- if (mutex_lock_killable(&hotkey_mutex))
- return -ERESTARTSYS;
- res = hotkey_mask_get();
- mutex_unlock(&hotkey_mutex);
-
- return (res)?
- res : snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_mask);
+ return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_user_mask);
}
static ssize_t hotkey_mask_store(struct device *dev,
if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
- res = hotkey_mask_set(t);
+ res = hotkey_user_mask_set(t);
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
hotkey_poll_setup(true);
const char *buf, size_t count)
{
unsigned long t;
+ u32 r_ev;
+ int rc;
if (parse_strtoul(buf, 0xffffffffUL, &t) ||
((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0))
hotkey_source_mask = t;
HOTKEY_CONFIG_CRITICAL_END
+ rc = hotkey_mask_set((hotkey_user_mask | hotkey_driver_mask) &
+ ~hotkey_source_mask);
hotkey_poll_setup(true);
- hotkey_mask_set(hotkey_mask);
+
+ /* check if events needed by the driver got disabled */
+ r_ev = hotkey_driver_mask & ~(hotkey_acpi_mask & hotkey_all_mask)
+ & ~hotkey_source_mask & TPACPI_HKEY_NVRAM_KNOWN_MASK;
mutex_unlock(&hotkey_mutex);
+ if (rc < 0)
+ printk(TPACPI_ERR "hotkey_source_mask: failed to update the"
+ "firmware event mask!\n");
+
+ if (r_ev)
+ printk(TPACPI_NOTICE "hotkey_source_mask: "
+ "some important events were disabled: "
+ "0x%04x\n", r_ev);
+
tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t);
- return count;
+ return (rc < 0) ? rc : count;
}
static struct device_attribute dev_attr_hotkey_source_mask =
static void hotkey_wakeup_reason_notify_change(void)
{
- if (tp_features.hotkey_mask)
- sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
- "wakeup_reason");
+ sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+ "wakeup_reason");
}
/* sysfs wakeup hotunplug_complete (pollable) -------------------------- */
static void hotkey_wakeup_hotunplug_complete_notify_change(void)
{
- if (tp_features.hotkey_mask)
- sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
- "wakeup_hotunplug_complete");
+ sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+ "wakeup_hotunplug_complete");
}
/* --------------------------------------------------------------------- */
static struct attribute *hotkey_attributes[] __initdata = {
&dev_attr_hotkey_enable.attr,
&dev_attr_hotkey_bios_enabled.attr,
+ &dev_attr_hotkey_bios_mask.attr,
&dev_attr_hotkey_report_mode.attr,
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ &dev_attr_hotkey_wakeup_reason.attr,
+ &dev_attr_hotkey_wakeup_hotunplug_complete.attr,
&dev_attr_hotkey_mask.attr,
&dev_attr_hotkey_all_mask.attr,
&dev_attr_hotkey_recommended_mask.attr,
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
&dev_attr_hotkey_source_mask.attr,
&dev_attr_hotkey_poll_freq.attr,
#endif
};
-static struct attribute *hotkey_mask_attributes[] __initdata = {
- &dev_attr_hotkey_bios_mask.attr,
-#ifndef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- &dev_attr_hotkey_mask.attr,
- &dev_attr_hotkey_all_mask.attr,
- &dev_attr_hotkey_recommended_mask.attr,
-#endif
- &dev_attr_hotkey_wakeup_reason.attr,
- &dev_attr_hotkey_wakeup_hotunplug_complete.attr,
-};
-
/*
* Sync both the hw and sw blocking state of all switches
*/
kfree(hotkey_keycode_map);
- if (tp_features.hotkey) {
- dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
- "restoring original hot key mask\n");
- /* no short-circuit boolean operator below! */
- if ((hotkey_mask_set(hotkey_orig_mask) |
- hotkey_status_set(false)) != 0)
- printk(TPACPI_ERR
- "failed to restore hot key mask "
- "to BIOS defaults\n");
- }
+ dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
+ "restoring original HKEY status and mask\n");
+ /* yes, there is a bitwise or below, we want the
+ * functions to be called even if one of them fail */
+ if (((tp_features.hotkey_mask &&
+ hotkey_mask_set(hotkey_orig_mask)) |
+ hotkey_status_set(false)) != 0)
+ printk(TPACPI_ERR
+ "failed to restore hot key mask "
+ "to BIOS defaults\n");
}
static void __init hotkey_unmap(const unsigned int scancode)
}
}
+/*
+ * HKEY quirks:
+ * TPACPI_HK_Q_INIMASK: Supports FN+F3,FN+F4,FN+F12
+ */
+
+#define TPACPI_HK_Q_INIMASK 0x0001
+
+static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
+ TPACPI_Q_IBM('I', 'H', TPACPI_HK_Q_INIMASK), /* 600E */
+ TPACPI_Q_IBM('I', 'N', TPACPI_HK_Q_INIMASK), /* 600E */
+ TPACPI_Q_IBM('I', 'D', TPACPI_HK_Q_INIMASK), /* 770, 770E, 770ED */
+ TPACPI_Q_IBM('I', 'W', TPACPI_HK_Q_INIMASK), /* A20m */
+ TPACPI_Q_IBM('I', 'V', TPACPI_HK_Q_INIMASK), /* A20p */
+ TPACPI_Q_IBM('1', '0', TPACPI_HK_Q_INIMASK), /* A21e, A22e */
+ TPACPI_Q_IBM('K', 'U', TPACPI_HK_Q_INIMASK), /* A21e */
+ TPACPI_Q_IBM('K', 'X', TPACPI_HK_Q_INIMASK), /* A21m, A22m */
+ TPACPI_Q_IBM('K', 'Y', TPACPI_HK_Q_INIMASK), /* A21p, A22p */
+ TPACPI_Q_IBM('1', 'B', TPACPI_HK_Q_INIMASK), /* A22e */
+ TPACPI_Q_IBM('1', '3', TPACPI_HK_Q_INIMASK), /* A22m */
+ TPACPI_Q_IBM('1', 'E', TPACPI_HK_Q_INIMASK), /* A30/p (0) */
+ TPACPI_Q_IBM('1', 'C', TPACPI_HK_Q_INIMASK), /* R30 */
+ TPACPI_Q_IBM('1', 'F', TPACPI_HK_Q_INIMASK), /* R31 */
+ TPACPI_Q_IBM('I', 'Y', TPACPI_HK_Q_INIMASK), /* T20 */
+ TPACPI_Q_IBM('K', 'Z', TPACPI_HK_Q_INIMASK), /* T21 */
+ TPACPI_Q_IBM('1', '6', TPACPI_HK_Q_INIMASK), /* T22 */
+ TPACPI_Q_IBM('I', 'Z', TPACPI_HK_Q_INIMASK), /* X20, X21 */
+ TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
+};
+
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
- /* brightness: firmware always reacts to them, unless
- * X.org did some tricks in the radeon BIOS scratch
- * registers of *some* models */
+ /* brightness: firmware always reacts to them */
KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
KEY_RESERVED, /* 0x10: FN+END (brightness down) */
int status;
int hkeyv;
+ unsigned long quirks;
+
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"initializing hotkey subdriver\n");
if (!tp_features.hotkey)
return 1;
+ quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable,
+ ARRAY_SIZE(tpacpi_hotkey_qtable));
+
tpacpi_disable_brightness_delay();
- hotkey_dev_attributes = create_attr_set(13, NULL);
+ /* MUST have enough space for all attributes to be added to
+ * hotkey_dev_attributes */
+ hotkey_dev_attributes = create_attr_set(
+ ARRAY_SIZE(hotkey_attributes) + 2,
+ NULL);
if (!hotkey_dev_attributes)
return -ENOMEM;
res = add_many_to_attr_set(hotkey_dev_attributes,
if (res)
goto err_exit;
- /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ /* mask not supported on 600e/x, 770e, 770x, A21e, A2xm/p,
A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
for HKEY interface version 0x100 */
if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
* MHKV 0x100 in A31, R40, R40e,
* T4x, X31, and later
*/
- tp_features.hotkey_mask = 1;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"firmware HKEY interface version: 0x%x\n",
hkeyv);
+
+ /* Paranoia check AND init hotkey_all_mask */
+ if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+ "MHKA", "qd")) {
+ printk(TPACPI_ERR
+ "missing MHKA handler, "
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ /* Fallback: pre-init for FN+F3,F4,F12 */
+ hotkey_all_mask = 0x080cU;
+ } else {
+ tp_features.hotkey_mask = 1;
+ }
}
}
"hotkey masks are %s\n",
str_supported(tp_features.hotkey_mask));
- if (tp_features.hotkey_mask) {
- if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
- "MHKA", "qd")) {
- printk(TPACPI_ERR
- "missing MHKA handler, "
- "please report this to %s\n",
- TPACPI_MAIL);
- /* FN+F12, FN+F4, FN+F3 */
- hotkey_all_mask = 0x080cU;
- }
- }
+ /* Init hotkey_all_mask if not initialized yet */
+ if (!tp_features.hotkey_mask && !hotkey_all_mask &&
+ (quirks & TPACPI_HK_Q_INIMASK))
+ hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */
- /* hotkey_source_mask *must* be zero for
- * the first hotkey_mask_get */
+ /* Init hotkey_acpi_mask and hotkey_orig_mask */
if (tp_features.hotkey_mask) {
+ /* hotkey_source_mask *must* be zero for
+ * the first hotkey_mask_get to return hotkey_orig_mask */
res = hotkey_mask_get();
if (res)
goto err_exit;
- hotkey_orig_mask = hotkey_mask;
- res = add_many_to_attr_set(
- hotkey_dev_attributes,
- hotkey_mask_attributes,
- ARRAY_SIZE(hotkey_mask_attributes));
- if (res)
- goto err_exit;
+ hotkey_orig_mask = hotkey_acpi_mask;
+ } else {
+ hotkey_orig_mask = hotkey_all_mask;
+ hotkey_acpi_mask = hotkey_all_mask;
}
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
}
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- if (tp_features.hotkey_mask) {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_all_mask
- & ~hotkey_reserved_mask;
- } else {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_reserved_mask;
- }
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+ & ~hotkey_all_mask
+ & ~hotkey_reserved_mask;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"hotkey source mask 0x%08x, polling freq %u\n",
hotkey_exit();
return res;
}
- res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
- & ~hotkey_reserved_mask)
- | hotkey_orig_mask);
+ res = hotkey_mask_set(((hotkey_all_mask & ~hotkey_reserved_mask)
+ | hotkey_driver_mask)
+ & ~hotkey_source_mask);
if (res < 0 && res != -ENXIO) {
hotkey_exit();
return res;
}
+ hotkey_user_mask = (hotkey_acpi_mask | hotkey_source_mask)
+ & ~hotkey_reserved_mask;
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+ "initial masks: user=0x%08x, fw=0x%08x, poll=0x%08x\n",
+ hotkey_user_mask, hotkey_acpi_mask, hotkey_source_mask);
dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"legacy ibm/hotkey event reporting over procfs %s\n",
if (scancode > 0 && scancode < 0x21) {
scancode--;
if (!(hotkey_source_mask & (1 << scancode))) {
- tpacpi_input_send_key(scancode);
+ tpacpi_input_send_key_masked(scancode);
*send_acpi_ev = false;
} else {
*ignore_acpi_ev = true;
*ignore_acpi_ev = false;
switch (hkey) {
- case 0x2304: /* suspend, undock */
- case 0x2404: /* hibernation, undock */
+ case TP_HKEY_EV_WKUP_S3_UNDOCK: /* suspend, undock */
+ case TP_HKEY_EV_WKUP_S4_UNDOCK: /* hibernation, undock */
hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
*ignore_acpi_ev = true;
break;
- case 0x2305: /* suspend, bay eject */
- case 0x2405: /* hibernation, bay eject */
+ case TP_HKEY_EV_WKUP_S3_BAYEJ: /* suspend, bay eject */
+ case TP_HKEY_EV_WKUP_S4_BAYEJ: /* hibernation, bay eject */
hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
*ignore_acpi_ev = true;
break;
- case 0x2313: /* Battery on critical low level (S3) */
- case 0x2413: /* Battery on critical low level (S4) */
+ case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */
+ case TP_HKEY_EV_WKUP_S4_BATLOW: /* Battery on critical low level/S4 */
printk(TPACPI_ALERT
"EMERGENCY WAKEUP: battery almost empty\n");
/* how to auto-heal: */
*ignore_acpi_ev = false;
switch (hkey) {
- case 0x5010: /* Lenovo new BIOS: brightness changed */
- case 0x500b: /* X61t: tablet pen inserted into bay */
- case 0x500c: /* X61t: tablet pen removed from bay */
+ case TP_HKEY_EV_PEN_INSERTED: /* X61t: tablet pen inserted into bay */
+ case TP_HKEY_EV_PEN_REMOVED: /* X61t: tablet pen removed from bay */
return true;
- case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
- case 0x500a: /* X41t-X61t: swivel down (normal mode) */
+ case TP_HKEY_EV_TABLET_TABLET: /* X41t-X61t: tablet mode */
+ case TP_HKEY_EV_TABLET_NOTEBOOK: /* X41t-X61t: normal mode */
tpacpi_input_send_tabletsw();
hotkey_tablet_mode_notify_change();
*send_acpi_ev = false;
return true;
- case 0x5001:
- case 0x5002:
- /* LID switch events. Do not propagate */
+ case TP_HKEY_EV_LID_CLOSE: /* Lid closed */
+ case TP_HKEY_EV_LID_OPEN: /* Lid opened */
+ case TP_HKEY_EV_BRGHT_CHANGED: /* brightness changed */
+ /* do not propagate these events */
*ignore_acpi_ev = true;
return true;
*ignore_acpi_ev = false;
switch (hkey) {
- case 0x6011:
+ case TP_HKEY_EV_ALARM_BAT_HOT:
printk(TPACPI_CRIT
"THERMAL ALARM: battery is too hot!\n");
/* recommended action: warn user through gui */
return true;
- case 0x6012:
+ case TP_HKEY_EV_ALARM_BAT_XHOT:
printk(TPACPI_ALERT
"THERMAL EMERGENCY: battery is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
return true;
- case 0x6021:
+ case TP_HKEY_EV_ALARM_SENSOR_HOT:
printk(TPACPI_CRIT
"THERMAL ALARM: "
"a sensor reports something is too hot!\n");
/* recommended action: warn user through gui, that */
/* some internal component is too hot */
return true;
- case 0x6022:
+ case TP_HKEY_EV_ALARM_SENSOR_XHOT:
printk(TPACPI_ALERT
"THERMAL EMERGENCY: "
"a sensor reports something is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
return true;
- case 0x6030:
+ case TP_HKEY_EV_THM_TABLE_CHANGED:
printk(TPACPI_INFO
"EC reports that Thermal Table has changed\n");
/* recommended action: do nothing, we don't have
break;
case 3:
/* 0x3000-0x3FFF: bay-related wakeups */
- if (hkey == 0x3003) {
+ if (hkey == TP_HKEY_EV_BAYEJ_ACK) {
hotkey_autosleep_ack = 1;
printk(TPACPI_INFO
"bay ejected\n");
break;
case 4:
/* 0x4000-0x4FFF: dock-related wakeups */
- if (hkey == 0x4003) {
+ if (hkey == TP_HKEY_EV_UNDOCK_ACK) {
hotkey_autosleep_ack = 1;
printk(TPACPI_INFO
"undocked\n");
break;
case 7:
/* 0x7000-0x7FFF: misc */
- if (tp_features.hotkey_wlsw && hkey == 0x7000) {
+ if (tp_features.hotkey_wlsw &&
+ hkey == TP_HKEY_EV_RFKILL_CHANGED) {
tpacpi_send_radiosw_update();
send_acpi_ev = 0;
known_ev = true;
{
tpacpi_disable_brightness_delay();
- if (hotkey_mask_get())
+ if (hotkey_status_set(true) < 0 ||
+ hotkey_mask_set(hotkey_acpi_mask) < 0)
printk(TPACPI_ERR
- "error while trying to read hot key mask "
- "from firmware\n");
+ "error while attempting to reset the event "
+ "firmware interface\n");
+
tpacpi_send_radiosw_update();
hotkey_tablet_mode_notify_change();
hotkey_wakeup_reason_notify_change();
return res;
len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
- if (tp_features.hotkey_mask) {
- len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_mask);
+ if (hotkey_all_mask) {
+ len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_user_mask);
len += sprintf(p + len,
"commands:\tenable, disable, reset, <mask>\n");
} else {
if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
- mask = hotkey_mask;
+ mask = hotkey_user_mask;
res = 0;
while ((cmd = next_cmd(&buf))) {
}
}
- if (!res)
+ if (!res) {
tpacpi_disclose_usertask("procfs hotkey",
"set mask to 0x%08x\n", mask);
-
- if (!res && mask != hotkey_mask)
- res = hotkey_mask_set(mask);
+ res = hotkey_user_mask_set(mask);
+ }
errexit:
mutex_unlock(&hotkey_mutex);
TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
&ibm_backlight_data);
if (IS_ERR(ibm_backlight_device)) {
+ int rc = PTR_ERR(ibm_backlight_device);
+ ibm_backlight_device = NULL;
printk(TPACPI_ERR "Could not register backlight device\n");
- return PTR_ERR(ibm_backlight_device);
+ return rc;
}
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
****************************************************************************
****************************************************************************/
+/*
+ * HKEY event callout for other subdrivers go here
+ * (yes, it is ugly, but it is quick, safe, and gets the job done
+ */
+static void tpacpi_driver_event(const unsigned int hkey_event)
+{
+}
+
+
+
+static void hotkey_driver_event(const unsigned int scancode)
+{
+ tpacpi_driver_event(TP_HKEY_EV_HOTKEY_BASE + scancode);
+}
+
/* sysfs name ---------------------------------------------------------- */
static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev,
struct device_attribute *attr,
acpi_handle temp = NULL;
acpi_status status;
struct pnp_dev *dev;
+ struct acpi_hardware_id *id;
/*
* If a PnPacpi device is not present , the device
if (dev->capabilities & PNP_CONFIGURABLE)
pnpacpi_parse_resource_option_data(dev);
- if (device->flags.compatible_ids) {
- struct acpica_device_id_list *cid_list = device->pnp.cid_list;
- int i;
-
- for (i = 0; i < cid_list->count; i++) {
- if (!ispnpidacpi(cid_list->ids[i].string))
- continue;
- pnp_add_id(dev, cid_list->ids[i].string);
- }
+ list_for_each_entry(id, &device->pnp.ids, list) {
+ if (!strcmp(id->id, acpi_device_hid(device)))
+ continue;
+ if (!ispnpidacpi(id->id))
+ continue;
+ pnp_add_id(dev, id->id);
}
/* clear out the damaged flags */
struct pnp_dev *pnp = _pnp;
/* true means it matched */
- return acpi->flags.hardware_id
- && !acpi_get_physical_device(acpi->handle)
- && compare_pnp_id(pnp->id, acpi->pnp.hardware_id);
+ return !acpi_get_physical_device(acpi->handle)
+ && compare_pnp_id(pnp->id, acpi_device_hid(acpi));
}
static int __init acpi_pnp_find_device(struct device *dev, acpi_handle * handle)
}
#ifdef CONFIG_PM
-static int pxa_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa_rtc_suspend(struct device *dev)
{
- struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+ struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
enable_irq_wake(pxa_rtc->irq_Alrm);
return 0;
}
-static int pxa_rtc_resume(struct platform_device *pdev)
+static int pxa_rtc_resume(struct device *dev)
{
- struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+ struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
disable_irq_wake(pxa_rtc->irq_Alrm);
return 0;
}
-#else
-#define pxa_rtc_suspend NULL
-#define pxa_rtc_resume NULL
+
+static struct dev_pm_ops pxa_rtc_pm_ops = {
+ .suspend = pxa_rtc_suspend,
+ .resume = pxa_rtc_resume,
+};
#endif
static struct platform_driver pxa_rtc_driver = {
.remove = __exit_p(pxa_rtc_remove),
- .suspend = pxa_rtc_suspend,
- .resume = pxa_rtc_resume,
.driver = {
- .name = "pxa-rtc",
+ .name = "pxa-rtc",
+#ifdef CONFIG_PM
+ .pm = &pxa_rtc_pm_ops,
+#endif
},
};
}
#ifdef CONFIG_PM
-static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int sa1100_rtc_suspend(struct device *dev)
{
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
enable_irq_wake(IRQ_RTCAlrm);
return 0;
}
-static int sa1100_rtc_resume(struct platform_device *pdev)
+static int sa1100_rtc_resume(struct device *dev)
{
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
disable_irq_wake(IRQ_RTCAlrm);
return 0;
}
-#else
-#define sa1100_rtc_suspend NULL
-#define sa1100_rtc_resume NULL
+
+static struct dev_pm_ops sa1100_rtc_pm_ops = {
+ .suspend = sa1100_rtc_suspend,
+ .resume = sa1100_rtc_resume,
+};
#endif
static struct platform_driver sa1100_rtc_driver = {
.probe = sa1100_rtc_probe,
.remove = sa1100_rtc_remove,
- .suspend = sa1100_rtc_suspend,
- .resume = sa1100_rtc_resume,
.driver = {
- .name = "sa1100-rtc",
+ .name = "sa1100-rtc",
+#ifdef CONFIG_PM
+ .pm = &sa1100_rtc_pm_ops,
+#endif
},
};
#include <linux/init.h>
#include <linux/miscdevice.h>
-#include <linux/utsname.h>
#include <linux/debugfs.h>
#include <asm/ipl.h>
#include <asm/sclp.h>
u8 *p;
int count;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
/* Handle xon/xoff */
if (port->x_char) {
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
.cons = PXA_CONSOLE,
};
-static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM
+static int serial_pxa_suspend(struct device *dev)
{
- struct uart_pxa_port *sport = platform_get_drvdata(dev);
+ struct uart_pxa_port *sport = dev_get_drvdata(dev);
if (sport)
uart_suspend_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static int serial_pxa_resume(struct platform_device *dev)
+static int serial_pxa_resume(struct device *dev)
{
- struct uart_pxa_port *sport = platform_get_drvdata(dev);
+ struct uart_pxa_port *sport = dev_get_drvdata(dev);
if (sport)
uart_resume_port(&serial_pxa_reg, &sport->port);
return 0;
}
+static struct dev_pm_ops serial_pxa_pm_ops = {
+ .suspend = serial_pxa_suspend,
+ .resume = serial_pxa_resume,
+};
+#endif
+
static int serial_pxa_probe(struct platform_device *dev)
{
struct uart_pxa_port *sport;
.probe = serial_pxa_probe,
.remove = serial_pxa_remove,
- .suspend = serial_pxa_suspend,
- .resume = serial_pxa_resume,
.driver = {
.name = "pxa2xx-uart",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &serial_pxa_pm_ops,
+#endif
},
};
GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \
GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
- GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+ GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \
GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \
GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
return -EINVAL;
}
if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
- if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
- && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+ if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE)
+ && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) {
dev_err(chip_info->dev,
"Clock Phase is configured incorrectly\n");
return -EINVAL;
chip_info->data_size = SSP_DATA_BITS_12;
chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
- chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+ chip_info->clk_phase = SSP_CLK_SECOND_EDGE;
chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
chip_info->ctrl_len = SSP_BITS_8;
chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
}
#ifdef CONFIG_PM
-
-static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa2xx_spi_suspend(struct device *dev)
{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
+ struct driver_data *drv_data = dev_get_drvdata(dev);
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
return 0;
}
-static int pxa2xx_spi_resume(struct platform_device *pdev)
+static int pxa2xx_spi_resume(struct device *dev)
{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
+ struct driver_data *drv_data = dev_get_drvdata(dev);
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
/* Start the queue running */
status = start_queue(drv_data);
if (status != 0) {
- dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+ dev_err(dev, "problem starting queue (%d)\n", status);
return status;
}
return 0;
}
-#else
-#define pxa2xx_spi_suspend NULL
-#define pxa2xx_spi_resume NULL
-#endif /* CONFIG_PM */
+
+static struct dev_pm_ops pxa2xx_spi_pm_ops = {
+ .suspend = pxa2xx_spi_suspend,
+ .resume = pxa2xx_spi_resume,
+};
+#endif
static struct platform_driver driver = {
.driver = {
- .name = "pxa2xx-spi",
- .owner = THIS_MODULE,
+ .name = "pxa2xx-spi",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pxa2xx_spi_pm_ops,
+#endif
},
.remove = pxa2xx_spi_remove,
.shutdown = pxa2xx_spi_shutdown,
- .suspend = pxa2xx_spi_suspend,
- .resume = pxa2xx_spi_resume,
};
static int __init pxa2xx_spi_init(void)
source "drivers/staging/vt6656/Kconfig"
-source "drivers/staging/cpc-usb/Kconfig"
-
source "drivers/staging/udlfb/Kconfig"
source "drivers/staging/hv/Kconfig"
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
obj-$(CONFIG_VT6655) += vt6655/
obj-$(CONFIG_VT6656) += vt6656/
-obj-$(CONFIG_USB_CPC) += cpc-usb/
obj-$(CONFIG_FB_UDL) += udlfb/
obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_VME_BUS) += vme/
+++ /dev/null
-config USB_CPC
- tristate "CPC CAN USB driver"
- depends on USB && PROC_FS
- default n
+++ /dev/null
-obj-$(CONFIG_USB_CPC) += cpc-usb.o
-
-cpc-usb-y := cpc-usb_drv.o sja2m16c_2.o
+++ /dev/null
-Things to do for this driver to get merged into the main portion of the
-kernel:
- - checkpatch cleanups
- - sparse clean
- - remove proc code
- - tie into CAN socket interfaces if possible
- - figure out sane userspace api
- - use linux's error codes
-
-Send patches to Greg Kroah-Hartman <greg@kroah.com>
+++ /dev/null
-/*
- * CPC-USB CAN Interface Kernel Driver
- *
- * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <asm/uaccess.h>
-#include <linux/usb.h>
-
-
-#include <linux/proc_fs.h>
-
-#include "cpc.h"
-
-#include "cpc_int.h"
-#include "cpcusb.h"
-
-#include "sja2m16c.h"
-
-/* Version Information */
-#define DRIVER_AUTHOR "Sebastian Haas <haas@ems-wuensche.com>"
-#define DRIVER_DESC "CPC-USB Driver for Linux Kernel 2.6"
-#define DRIVER_VERSION CPC_DRIVER_VERSION
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
-
-/* Define these values to match your devices */
-#define USB_CPCUSB_VENDOR_ID 0x12D6
-
-#define USB_CPCUSB_M16C_PRODUCT_ID 0x0888
-#define USB_CPCUSB_LPC2119_PRODUCT_ID 0x0444
-
-#define CPC_USB_PROC_DIR CPC_PROC_DIR "cpc-usb"
-
-static struct proc_dir_entry *procDir;
-static struct proc_dir_entry *procEntry;
-
-/* Module parameters */
-static int debug;
-module_param(debug, int, S_IRUGO);
-
-/* table of devices that work with this driver */
-static struct usb_device_id cpcusb_table[] = {
- {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_M16C_PRODUCT_ID)},
- {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_LPC2119_PRODUCT_ID)},
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, cpcusb_table);
-
-/* use to prevent kernel panic if driver is unloaded
- * while a programm has still open the device
- */
-DECLARE_WAIT_QUEUE_HEAD(rmmodWq);
-atomic_t useCount;
-
-static CPC_USB_T *CPCUSB_Table[CPC_USB_CARD_CNT] = { 0 };
-static unsigned int CPCUsbCnt;
-
-/* prevent races between open() and disconnect() */
-static DECLARE_MUTEX(disconnect_sem);
-
-/* local function prototypes */
-static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos);
-static ssize_t cpcusb_write(struct file *file, const char *buffer,
- size_t count, loff_t *ppos);
-static unsigned int cpcusb_poll(struct file *file, poll_table * wait);
-static int cpcusb_open(struct inode *inode, struct file *file);
-static int cpcusb_release(struct inode *inode, struct file *file);
-
-static int cpcusb_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void cpcusb_disconnect(struct usb_interface *interface);
-
-static void cpcusb_read_bulk_callback(struct urb *urb);
-static void cpcusb_write_bulk_callback(struct urb *urb);
-static void cpcusb_read_interrupt_callback(struct urb *urb);
-
-static int cpcusb_setup_intrep(CPC_USB_T *card);
-
-static struct file_operations cpcusb_fops = {
- /*
- * The owner field is part of the module-locking
- * mechanism. The idea is that the kernel knows
- * which module to increment the use-counter of
- * BEFORE it calls the device's open() function.
- * This also means that the kernel can decrement
- * the use-counter again before calling release()
- * or should the open() function fail.
- */
- .owner = THIS_MODULE,
-
- .read = cpcusb_read,
- .write = cpcusb_write,
- .poll = cpcusb_poll,
- .open = cpcusb_open,
- .release = cpcusb_release,
-};
-
-/*
- * usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
- */
-static struct usb_class_driver cpcusb_class = {
- .name = "usb/cpc_usb%d",
- .fops = &cpcusb_fops,
- .minor_base = CPC_USB_BASE_MNR,
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver cpcusb_driver = {
- .name = "cpc-usb",
- .probe = cpcusb_probe,
- .disconnect = cpcusb_disconnect,
- .id_table = cpcusb_table,
-};
-
-static int cpcusb_create_info_output(char *buf)
-{
- int i = 0, j;
-
- for (j = 0; j < CPC_USB_CARD_CNT; j++) {
- if (CPCUSB_Table[j]) {
- CPC_USB_T *card = CPCUSB_Table[j];
- CPC_CHAN_T *chan = card->chan;
-
- /* MINOR CHANNELNO BUSNO SLOTNO */
- i += sprintf(&buf[i], "%d %s\n", chan->minor,
- card->serialNumber);
- }
- }
-
- return i;
-}
-
-static int cpcusb_proc_read_info(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = cpcusb_create_info_output(page);
-
- if (len <= off + count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
-
- return len;
-}
-
-/*
- * Remove CPC-USB and cleanup
- */
-static inline void cpcusb_delete(CPC_USB_T *card)
-{
- if (card) {
- if (card->chan) {
- if (card->chan->buf)
- vfree(card->chan->buf);
-
- if (card->chan->CPCWait_q)
- kfree(card->chan->CPCWait_q);
-
- kfree(card->chan);
- }
-
- CPCUSB_Table[card->idx] = NULL;
- kfree(card);
- }
-}
-
-/*
- * setup the interrupt IN endpoint of a specific CPC-USB device
- */
-static int cpcusb_setup_intrep(CPC_USB_T *card)
-{
- int retval = 0;
- struct usb_endpoint_descriptor *ep;
-
- ep = &card->interface->altsetting[0].endpoint[card->num_intr_in].desc;
-
- card->intr_in_buffer[0] = 0;
- card->free_slots = 15; /* initial size */
-
- /* setup the urb */
- usb_fill_int_urb(card->intr_in_urb, card->udev,
- usb_rcvintpipe(card->udev, card->num_intr_in),
- card->intr_in_buffer,
- sizeof(card->intr_in_buffer),
- cpcusb_read_interrupt_callback,
- card,
- ep->bInterval);
-
- card->intr_in_urb->status = 0; /* needed! */
-
- /* submit the urb */
- retval = usb_submit_urb(card->intr_in_urb, GFP_KERNEL);
-
- if (retval)
- err("%s - failed submitting intr urb, error %d", __func__,
- retval);
-
- return retval;
-}
-
-static int cpcusb_open(struct inode *inode, struct file *file)
-{
- CPC_USB_T *card = NULL;
- struct usb_interface *interface;
- int subminor;
- int j, retval = 0;
-
- subminor = iminor(inode);
-
- /* prevent disconnects */
- down(&disconnect_sem);
-
- interface = usb_find_interface(&cpcusb_driver, subminor);
- if (!interface) {
- err("%s - error, can't find device for minor %d",
- __func__, subminor);
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_no_device;
- }
-
- card = usb_get_intfdata(interface);
- if (!card) {
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_no_device;
- }
-
- /* lock this device */
- down(&card->sem);
-
- /* increment our usage count for the driver */
- if (card->open) {
- dbg("device already opened");
- retval = CPC_ERR_CHANNEL_ALREADY_OPEN;
- goto exit_on_error;
- }
-
- /* save our object in the file's private structure */
- file->private_data = card;
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_fill_bulk_urb(card->urbs[j].urb, card->udev,
- usb_rcvbulkpipe(card->udev, card->num_bulk_in),
- card->urbs[j].buffer, card->urbs[j].size,
- cpcusb_read_bulk_callback, card);
-
- retval = usb_submit_urb(card->urbs[j].urb, GFP_KERNEL);
-
- if (retval) {
- err("%s - failed submitting read urb, error %d",
- __func__, retval);
- retval = CPC_ERR_TRANSMISSION_FAILED;
- goto exit_on_error;
- }
- }
-
- info("%s - %d URB's submitted", __func__, j);
-
- ResetBuffer(card->chan);
-
- cpcusb_setup_intrep(card);
- card->open = 1;
-
- atomic_inc(&useCount);
-
-exit_on_error:
- /* unlock this device */
- up(&card->sem);
-
-exit_no_device:
- up(&disconnect_sem);
-
- return retval;
-}
-
-static unsigned int cpcusb_poll(struct file *file, poll_table * wait)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- unsigned int retval = 0;
-
- if (!card) {
- err("%s - device object lost", __func__);
- return -EIO;
- }
-
- poll_wait(file, card->chan->CPCWait_q, wait);
-
- if (IsBufferNotEmpty(card->chan) || !(card->present))
- retval |= (POLLIN | POLLRDNORM);
-
- if (card->free_slots)
- retval |= (POLLOUT | POLLWRNORM);
-
- return retval;
-}
-
-static int cpcusb_release(struct inode *inode, struct file *file)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- int j, retval = 0;
-
- if (card == NULL) {
- dbg("%s - object is NULL", __func__);
- return CPC_ERR_NO_INTERFACE_PRESENT;
- }
-
- /* lock our device */
- down(&card->sem);
-
- if (!card->open) {
- dbg("%s - device not opened", __func__);
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_not_opened;
- }
-
- /* if device wasn't unplugged kill all urbs */
- if (card->present) {
- /* kill read urbs */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_kill_urb(card->urbs[j].urb);
- }
-
- /* kill irq urb */
- usb_kill_urb(card->intr_in_urb);
-
- /* kill write urbs */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (atomic_read(&card->wrUrbs[j].busy)) {
- usb_kill_urb(card->wrUrbs[j].urb);
- wait_for_completion(&card->wrUrbs[j].finished);
- }
- }
- }
-
- atomic_dec(&useCount);
-
- /* last process detached */
- if (atomic_read(&useCount) == 0) {
- wake_up(&rmmodWq);
- }
-
- if (!card->present && card->open) {
- /* the device was unplugged before the file was released */
- up(&card->sem);
- cpcusb_delete(card);
- return 0;
- }
-
- card->open = 0;
-
-exit_not_opened:
- up(&card->sem);
-
- return 0;
-}
-
-static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- CPC_CHAN_T *chan;
- int retval = 0;
-
- if (count < sizeof(CPC_MSG_T))
- return CPC_ERR_UNKNOWN;
-
- /* check if can read from the given address */
- if (!access_ok(VERIFY_WRITE, buffer, count))
- return CPC_ERR_UNKNOWN;
-
- /* lock this object */
- down(&card->sem);
-
- /* verify that the device wasn't unplugged */
- if (!card->present) {
- up(&card->sem);
- return CPC_ERR_NO_INTERFACE_PRESENT;
- }
-
- if (IsBufferEmpty(card->chan)) {
- retval = 0;
- } else {
- chan = card->chan;
-
-#if 0
- /* convert LPC2119 params back to SJA1000 params */
- if (card->deviceRevision >= 0x0200
- && chan->buf[chan->oidx].type == CPC_MSG_T_CAN_PRMS) {
- LPC2119_TO_SJA1000_Params(&chan->buf[chan->oidx]);
- }
-#endif
-
- if (copy_to_user(buffer, &chan->buf[chan->oidx], count) != 0) {
- retval = CPC_ERR_IO_TRANSFER;
- } else {
- chan->oidx = (chan->oidx + 1) % CPC_MSG_BUF_CNT;
- chan->WnR = 1;
- retval = sizeof(CPC_MSG_T);
- }
- }
-/* spin_unlock_irqrestore(&card->slock, flags); */
-
- /* unlock the device */
- up(&card->sem);
-
- return retval;
-}
-
-#define SHIFT 1
-static inline void cpcusb_align_buffer_alignment(unsigned char *buf)
-{
- /* CPC-USB uploads packed bytes. */
- CPC_MSG_T *cpc = (CPC_MSG_T *) buf;
- unsigned int i;
-
- for (i = 0; i < cpc->length + (2 * sizeof(unsigned long)); i++) {
- ((unsigned char *) &cpc->msgid)[1 + i] =
- ((unsigned char *) &cpc->msgid)[1 + SHIFT + i];
- }
-}
-
-static int cpc_get_buffer_count(CPC_CHAN_T *chan)
-{
- /* check the buffer parameters */
- if (chan->iidx == chan->oidx)
- return !chan->WnR ? CPC_MSG_BUF_CNT : 0;
- else if (chan->iidx >= chan->oidx)
- return (chan->iidx - chan->oidx) % CPC_MSG_BUF_CNT;
-
- return (chan->iidx + CPC_MSG_BUF_CNT - chan->oidx) % CPC_MSG_BUF_CNT;
-}
-
-static ssize_t cpcusb_write(struct file *file, const char *buffer,
- size_t count, loff_t *ppos)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- CPC_USB_WRITE_URB_T *wrUrb = NULL;
-
- ssize_t bytes_written = 0;
- int retval = 0;
- int j;
-
- unsigned char *obuf = NULL;
- unsigned char type = 0;
- CPC_MSG_T *info = NULL;
-
- dbg("%s - entered minor %d, count = %zu, present = %d",
- __func__, card->minor, count, card->present);
-
- if (count > sizeof(CPC_MSG_T))
- return CPC_ERR_UNKNOWN;
-
- /* check if can read from the given address */
- if (!access_ok(VERIFY_READ, buffer, count))
- return CPC_ERR_UNKNOWN;
-
- /* lock this object */
- down(&card->sem);
-
- /* verify that the device wasn't unplugged */
- if (!card->present) {
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit;
- }
-
- /* verify that we actually have some data to write */
- if (count == 0) {
- dbg("%s - write request of 0 bytes", __func__);
- goto exit;
- }
-
- if (card->free_slots <= 5) {
- info = (CPC_MSG_T *) buffer;
-
- if (info->type != CPC_CMD_T_CLEAR_CMD_QUEUE
- || card->free_slots <= 0) {
- dbg("%s - send buffer full please try again %d",
- __func__, card->free_slots);
- retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
- goto exit;
- }
- }
-
- /* Find a free write urb */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (!atomic_read(&card->wrUrbs[j].busy)) {
- wrUrb = &card->wrUrbs[j]; /* remember found URB */
- atomic_set(&wrUrb->busy, 1); /* lock this URB */
- init_completion(&wrUrb->finished); /* init completion */
- dbg("WR URB no. %d started", j);
- break;
- }
- }
-
- /* don't found write urb say error */
- if (!wrUrb) {
- dbg("%s - no free send urb available", __func__);
- retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
- goto exit;
- }
- dbg("URB write req");
-
- obuf = (unsigned char *) wrUrb->urb->transfer_buffer;
-
- /* copy the data from userspace into our transfer buffer;
- * this is the only copy required.
- */
- if (copy_from_user(&obuf[4], buffer, count) != 0) {
- atomic_set(&wrUrb->busy, 0); /* release urb */
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- /* check if it is a DRIVER information message, so we can
- * response to that message and not the USB
- */
- info = (CPC_MSG_T *) &obuf[4];
-
- bytes_written = 11 + info->length;
- if (bytes_written >= wrUrb->size) {
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- switch (info->type) {
- case CPC_CMD_T_CLEAR_MSG_QUEUE:
- ResetBuffer(card->chan);
- break;
-
- case CPC_CMD_T_INQ_MSG_QUEUE_CNT:
- retval = cpc_get_buffer_count(card->chan);
- atomic_set(&wrUrb->busy, 0);
-
- goto exit;
-
- case CPC_CMD_T_INQ_INFO:
- if (info->msg.info.source == CPC_INFOMSG_T_DRIVER) {
- /* release urb cause we'll use it for driver
- * information
- */
- atomic_set(&wrUrb->busy, 0);
- if (IsBufferFull(card->chan)) {
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- /* it is a driver information request message and we have
- * free rx slots to store the response
- */
- type = info->msg.info.type;
- info = &card->chan->buf[card->chan->iidx];
-
- info->type = CPC_MSG_T_INFO;
- info->msg.info.source = CPC_INFOMSG_T_DRIVER;
- info->msg.info.type = type;
-
- switch (type) {
- case CPC_INFOMSG_T_VERSION:
- info->length = strlen(CPC_DRIVER_VERSION) + 2;
- sprintf(info->msg.info.msg, "%s\n",
- CPC_DRIVER_VERSION);
- break;
-
- case CPC_INFOMSG_T_SERIAL:
- info->length = strlen(CPC_DRIVER_SERIAL) + 2;
- sprintf(info->msg.info.msg, "%s\n",
- CPC_DRIVER_SERIAL);
- break;
-
- default:
- info->length = 2;
- info->msg.info.type =
- CPC_INFOMSG_T_UNKNOWN_TYPE;
- }
-
- card->chan->WnR = 0;
- card->chan->iidx =
- (card->chan->iidx + 1) % CPC_MSG_BUF_CNT;
-
- retval = info->length;
- goto exit;
- }
- break;
- case CPC_CMD_T_CAN_PRMS:
- /* Check the controller type. If it's the new CPC-USB, make sure if these are SJA1000 params */
- if (info->msg.canparams.cc_type != SJA1000
- && info->msg.canparams.cc_type != M16C_BASIC
- && (card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID
- && info->msg.canparams.cc_type != SJA1000)) {
- /* don't forget to release the urb */
- atomic_set(&wrUrb->busy, 0);
- retval = CPC_ERR_WRONG_CONTROLLER_TYPE;
- goto exit;
- }
- break;
- }
-
- /* just convert the params if it is an old CPC-USB with M16C controller */
- if (card->productId == USB_CPCUSB_M16C_PRODUCT_ID) {
- /* if it is a parameter message convert it from SJA1000 controller
- * settings to M16C Basic controller settings
- */
- SJA1000_TO_M16C_BASIC_Params((CPC_MSG_T *) &obuf[4]);
- }
-
- /* don't forget the byte alignment */
- cpcusb_align_buffer_alignment(&obuf[4]);
-
- /* setup a the 4 byte header */
- obuf[0] = obuf[1] = obuf[2] = obuf[3] = 0;
-
- /* this urb was already set up, except for this write size */
- wrUrb->urb->transfer_buffer_length = bytes_written + 4;
-
- /* send the data out the bulk port */
- /* a character device write uses GFP_KERNEL,
- unless a spinlock is held */
- retval = usb_submit_urb(wrUrb->urb, GFP_KERNEL);
- if (retval) {
- atomic_set(&wrUrb->busy, 0); /* release urb */
- err("%s - failed submitting write urb, error %d",
- __func__, retval);
- } else {
- retval = bytes_written;
- }
-
-exit:
- /* unlock the device */
- up(&card->sem);
-
- dbg("%s - leaved", __func__);
-
- return retval;
-}
-
-/*
- * callback for interrupt IN urb
- */
-static void cpcusb_read_interrupt_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- int retval;
- unsigned long flags;
-
- spin_lock_irqsave(&card->slock, flags);
-
- if (!card->present) {
- spin_unlock_irqrestore(&card->slock, flags);
- info("%s - no such device", __func__);
- return;
- }
-
- switch (urb->status) {
- case 0: /* success */
- card->free_slots = card->intr_in_buffer[1];
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - intr urb killed", __func__);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval) {
- err("%s - failed resubmitting intr urb, error %d",
- __func__, retval);
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
- wake_up_interruptible(card->chan->CPCWait_q);
-
- return;
-}
-
-#define UN_SHIFT 1
-#define CPCMSG_HEADER_LEN_FIRMWARE 11
-static inline int cpcusb_unalign_and_copy_buffy(unsigned char *out,
- unsigned char *in)
-{
- unsigned int i, j;
-
- for (i = 0; i < 3; i++)
- out[i] = in[i];
-
- for (j = 0; j < (in[1] + (CPCMSG_HEADER_LEN_FIRMWARE - 3)); j++)
- out[j + i + UN_SHIFT] = in[j + i];
-
- return i + j;
-}
-
-/*
- * callback for bulk IN urb
- */
-static void cpcusb_read_bulk_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- CPC_CHAN_T *chan;
- unsigned char *ibuf = urb->transfer_buffer;
- int retval, msgCnt, start, again = 0;
- unsigned long flags;
-
- if (!card) {
- err("%s - device object lost", __func__);
- return;
- }
-
- spin_lock_irqsave(&card->slock, flags);
-
- if (!card->present) {
- spin_unlock_irqrestore(&card->slock, flags);
- info("%s - no such device", __func__);
- return;
- }
-
- switch (urb->status) {
- case 0: /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - read urb killed", __func__);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- if (urb->actual_length) {
- msgCnt = ibuf[0] & ~0x80;
- again = ibuf[0] & 0x80;
-
- /* we have a 4 byte header */
- start = 4;
- chan = card->chan;
- while (msgCnt) {
- if (!(IsBufferFull(card->chan))) {
- start +=
- cpcusb_unalign_and_copy_buffy((unsigned char *)
- &chan->buf[chan->iidx], &ibuf[start]);
-
- if (start > urb->transfer_buffer_length) {
- err("%d > %d", start, urb->transfer_buffer_length);
- break;
- }
-
- chan->WnR = 0;
- chan->iidx = (chan->iidx + 1) % CPC_MSG_BUF_CNT;
- msgCnt--;
- } else {
- break;
- }
- }
- }
-
- usb_fill_bulk_urb(urb, card->udev,
- usb_rcvbulkpipe(card->udev, card->num_bulk_in),
- urb->transfer_buffer,
- urb->transfer_buffer_length,
- cpcusb_read_bulk_callback, card);
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
-
- if (retval) {
- err("%s - failed resubmitting read urb, error %d", __func__, retval);
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
-
- wake_up_interruptible(card->chan->CPCWait_q);
-}
-
-/*
- * callback for bulk IN urb
- */
-static void cpcusb_write_bulk_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- unsigned long flags;
- int j;
-
- spin_lock_irqsave(&card->slock, flags);
-
- /* find this urb */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (card->wrUrbs[j].urb == urb) {
- dbg("URB found no. %d", j);
- /* notify anyone waiting that the write has finished */
- complete(&card->wrUrbs[j].finished);
- atomic_set(&card->wrUrbs[j].busy, 0);
- break;
- }
- }
-
- switch (urb->status) {
- case 0: /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - write urb no. %d killed", __func__, j);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
-
- wake_up_interruptible(card->chan->CPCWait_q);
-}
-
-static inline int cpcusb_get_free_slot(void)
-{
- int i;
-
- for (i = 0; i < CPC_USB_CARD_CNT; i++) {
- if (!CPCUSB_Table[i])
- return i;
- }
-
- return -1;
-}
-
-/*
- * probe function for new CPC-USB devices
- */
-static int cpcusb_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- CPC_USB_T *card = NULL;
- CPC_CHAN_T *chan = NULL;
-
- struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint;
-
- int i, j, retval = -ENOMEM, slot;
-
- slot = cpcusb_get_free_slot();
- if (slot < 0) {
- info("No more devices supported");
- return -ENOMEM;
- }
-
- /* allocate memory for our device state and initialize it */
- card = kzalloc(sizeof(CPC_USB_T), GFP_KERNEL);
- if (!card) {
- err("Out of memory");
- return -ENOMEM;
- }
- CPCUSB_Table[slot] = card;
-
- /* allocate and initialize the channel struct */
- card->chan = kmalloc(sizeof(CPC_CHAN_T), GFP_KERNEL);
- if (!card->chan) {
- kfree(card);
- err("Out of memory");
- return -ENOMEM;
- }
-
- chan = card->chan;
- memset(chan, 0, sizeof(CPC_CHAN_T));
- ResetBuffer(chan);
-
- init_MUTEX(&card->sem);
- spin_lock_init(&card->slock);
-
- card->udev = udev;
- card->interface = interface;
- if (udev->descriptor.iSerialNumber) {
- usb_string(udev, udev->descriptor.iSerialNumber, card->serialNumber,
- 128);
- info("Serial %s", card->serialNumber);
- }
-
- card->productId = udev->descriptor.idProduct;
- info("Product %s",
- card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID ?
- "CPC-USB/ARM7" : "CPC-USB/M16C");
-
- /* set up the endpoint information */
- /* check out the endpoints */
- /* use only the first bulk-in and bulk-out endpoints */
- iface_desc = &interface->altsetting[0];
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (!card->num_intr_in &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
- card->intr_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- card->num_intr_in = 1;
-
- if (!card->intr_in_urb) {
- err("No free urbs available");
- goto error;
- }
-
- dbg("intr_in urb %d", card->num_intr_in);
- }
-
- if (!card->num_bulk_in &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
- card->num_bulk_in = 2;
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- card->urbs[j].size = endpoint->wMaxPacketSize;
- card->urbs[j].urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!card->urbs[j].urb) {
- err("No free urbs available");
- goto error;
- }
- card->urbs[j].buffer =
- usb_buffer_alloc(udev,
- card->urbs[j].size,
- GFP_KERNEL,
- &card->urbs[j].urb->transfer_dma);
- if (!card->urbs[j].buffer) {
- err("Couldn't allocate bulk_in_buffer");
- goto error;
- }
- }
- info("%s - %d reading URB's allocated",
- __func__, CPC_USB_URB_CNT);
- }
-
- if (!card->num_bulk_out &&
- !(endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
-
- card->num_bulk_out = 2;
-
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- card->wrUrbs[j].size =
- endpoint->wMaxPacketSize;
- card->wrUrbs[j].urb =
- usb_alloc_urb(0, GFP_KERNEL);
- if (!card->wrUrbs[j].urb) {
- err("No free urbs available");
- goto error;
- }
- card->wrUrbs[j].buffer = usb_buffer_alloc(udev,
- card->wrUrbs[j].size, GFP_KERNEL,
- &card->wrUrbs[j].urb->transfer_dma);
-
- if (!card->wrUrbs[j].buffer) {
- err("Couldn't allocate bulk_out_buffer");
- goto error;
- }
-
- usb_fill_bulk_urb(card->wrUrbs[j].urb, udev,
- usb_sndbulkpipe(udev, endpoint->bEndpointAddress),
- card->wrUrbs[j].buffer,
- card->wrUrbs[j].size,
- cpcusb_write_bulk_callback,
- card);
- }
-
- info("%s - %d writing URB's allocated", __func__, CPC_USB_URB_CNT);
- }
- }
-
- if (!(card->num_bulk_in && card->num_bulk_out)) {
- err("Couldn't find both bulk-in and bulk-out endpoints");
- goto error;
- }
-
- /* allow device read, write and ioctl */
- card->present = 1;
-
- /* we can register the device now, as it is ready */
- usb_set_intfdata(interface, card);
- retval = usb_register_dev(interface, &cpcusb_class);
-
- if (retval) {
- /* something prevented us from registering this driver */
- err("Not able to get a minor for this device.");
- usb_set_intfdata(interface, NULL);
- goto error;
- }
-
- card->chan->minor = card->minor = interface->minor;
-
- chan->buf = vmalloc(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
- if (chan->buf == NULL) {
- err("Out of memory");
- retval = -ENOMEM;
- goto error;
- }
- info("Allocated memory for %d messages (%lu kbytes)",
- CPC_MSG_BUF_CNT, (long unsigned int)(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT) / 1000);
- memset(chan->buf, 0, sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
-
- ResetBuffer(chan);
-
- card->chan->CPCWait_q = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL);
- if (!card->chan->CPCWait_q) {
- err("Out of memory");
- retval = -ENOMEM;
- goto error;
- }
- init_waitqueue_head(card->chan->CPCWait_q);
-
- CPCUSB_Table[slot] = card;
- card->idx = slot;
- CPCUsbCnt++;
-
- /* let the user know what node this device is now attached to */
- info("Device now attached to USB-%d", card->minor);
- return 0;
-
-error:
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (card->urbs[j].buffer) {
- usb_buffer_free(card->udev, card->urbs[j].size,
- card->urbs[j].buffer,
- card->urbs[j].urb->transfer_dma);
- card->urbs[j].buffer = NULL;
- }
- if (card->urbs[j].urb) {
- usb_free_urb(card->urbs[j].urb);
- card->urbs[j].urb = NULL;
- }
- }
-
- cpcusb_delete(card);
- return retval;
-}
-
-/*
- * called by the usb core when the device is removed from the system
- */
-static void cpcusb_disconnect(struct usb_interface *interface)
-{
- CPC_USB_T *card = NULL;
- int minor, j;
-
- /* prevent races with open() */
- down(&disconnect_sem);
-
- card = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
-
- down(&card->sem);
-
- /* prevent device read, write and ioctl */
- card->present = 0;
-
- minor = card->minor;
-
- /* free all urbs and their buffers */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- /* terminate an ongoing write */
- if (atomic_read(&card->wrUrbs[j].busy)) {
- usb_kill_urb(card->wrUrbs[j].urb);
- wait_for_completion(&card->wrUrbs[j].finished);
- }
- usb_buffer_free(card->udev, card->wrUrbs[j].size,
- card->wrUrbs[j].buffer,
- card->wrUrbs[j].urb->transfer_dma);
- usb_free_urb(card->wrUrbs[j].urb);
- }
- info("%d write URBs freed", CPC_USB_URB_CNT);
-
- /* free all urbs and their buffers */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_buffer_free(card->udev, card->urbs[j].size,
- card->urbs[j].buffer,
- card->urbs[j].urb->transfer_dma);
- usb_free_urb(card->urbs[j].urb);
- }
- info("%d read URBs freed", CPC_USB_URB_CNT);
- usb_free_urb(card->intr_in_urb);
-
- /* give back our minor */
- usb_deregister_dev(interface, &cpcusb_class);
-
- up(&card->sem);
-
- /* if the device is opened, cpcusb_release will clean this up */
- if (!card->open)
- cpcusb_delete(card);
- else
- wake_up_interruptible(card->chan->CPCWait_q);
-
- up(&disconnect_sem);
-
- CPCUsbCnt--;
- info("USB-%d now disconnected", minor);
-}
-
-static int __init CPCUsb_Init(void)
-{
- int result, i;
-
- info(DRIVER_DESC " v" DRIVER_VERSION);
- info("Build on " __DATE__ " at " __TIME__);
-
- for (i = 0; i < CPC_USB_CARD_CNT; i++)
- CPCUSB_Table[i] = 0;
-
- /* register this driver with the USB subsystem */
- result = usb_register(&cpcusb_driver);
- if (result) {
- err("usb_register failed. Error number %d", result);
- return result;
- }
-
- procDir = proc_mkdir(CPC_USB_PROC_DIR, NULL);
- if (!procDir) {
- err("Could not create proc entry");
- } else {
- procEntry = create_proc_read_entry("info", 0444, procDir,
- cpcusb_proc_read_info,
- NULL);
- if (!procEntry) {
- err("Could not create proc entry %s", CPC_USB_PROC_DIR "/info");
- remove_proc_entry(CPC_USB_PROC_DIR, NULL);
- procDir = NULL;
- }
- }
-
- return 0;
-}
-
-static void __exit CPCUsb_Exit(void)
-{
- wait_event(rmmodWq, !atomic_read(&useCount));
-
- /* deregister this driver with the USB subsystem */
- usb_deregister(&cpcusb_driver);
-
- if (procDir) {
- if (procEntry)
- remove_proc_entry("info", procDir);
- remove_proc_entry(CPC_USB_PROC_DIR, NULL);
- }
-}
-
-module_init(CPCUsb_Init);
-module_exit(CPCUsb_Exit);
+++ /dev/null
-/*
- * CPC CAN Interface Definitions
- *
- * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef CPC_HEADER
-#define CPC_HEADER
-
-/*
- * the maximum length of the union members within a CPC_MSG
- * this value can be defined by the customer, but has to be
- * >= 64 bytes
- * however, if not defined before, we set a length of 64 byte
- */
-#if !defined(CPC_MSG_LEN) || (CPC_MSG_LEN < 64)
-#undef CPC_MSG_LEN
-#define CPC_MSG_LEN 64
-#endif
-
-/*
- * Transmission of events from CPC interfaces to PC can be individually
- * controlled per event type. Default state is: don't transmit
- * Control values are constructed by bit-or of Subject and Action
- * and passed to CPC_Control()
- */
-
-/* Control-Values for CPC_Control() Command Subject Selection */
-#define CONTR_CAN_Message 0x04
-#define CONTR_Busload 0x08
-#define CONTR_CAN_State 0x0C
-#define CONTR_SendAck 0x10
-#define CONTR_Filter 0x14
-#define CONTR_CmdQueue 0x18 /* reserved, do not use */
-#define CONTR_BusError 0x1C
-
-/* Control Command Actions */
-#define CONTR_CONT_OFF 0
-#define CONTR_CONT_ON 1
-#define CONTR_SING_ON 2
-/*
- * CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be
- * read as: transmit at least once
- */
-
-/* defines for confirmed request */
-#define DO_NOT_CONFIRM 0
-#define DO_CONFIRM 1
-
-/* event flags */
-#define EVENT_READ 0x01
-#define EVENT_WRITE 0x02
-
-/*
- * Messages from CPC to PC contain a message object type field.
- * The following message types are sent by CPC and can be used in
- * handlers, others should be ignored.
- */
-#define CPC_MSG_T_RESYNC 0 /* Normally to be ignored */
-#define CPC_MSG_T_CAN 1 /* CAN data frame */
-#define CPC_MSG_T_BUSLOAD 2 /* Busload message */
-#define CPC_MSG_T_STRING 3 /* Normally to be ignored */
-#define CPC_MSG_T_CONTI 4 /* Normally to be ignored */
-#define CPC_MSG_T_MEM 7 /* Normally not to be handled */
-#define CPC_MSG_T_RTR 8 /* CAN remote frame */
-#define CPC_MSG_T_TXACK 9 /* Send acknowledge */
-#define CPC_MSG_T_POWERUP 10 /* Power-up message */
-#define CPC_MSG_T_CMD_NO 11 /* Normally to be ignored */
-#define CPC_MSG_T_CAN_PRMS 12 /* Actual CAN parameters */
-#define CPC_MSG_T_ABORTED 13 /* Command aborted message */
-#define CPC_MSG_T_CANSTATE 14 /* CAN state message */
-#define CPC_MSG_T_RESET 15 /* used to reset CAN-Controller */
-#define CPC_MSG_T_XCAN 16 /* XCAN data frame */
-#define CPC_MSG_T_XRTR 17 /* XCAN remote frame */
-#define CPC_MSG_T_INFO 18 /* information strings */
-#define CPC_MSG_T_CONTROL 19 /* used for control of interface/driver behaviour */
-#define CPC_MSG_T_CONFIRM 20 /* response type for confirmed requests */
-#define CPC_MSG_T_OVERRUN 21 /* response type for overrun conditions */
-#define CPC_MSG_T_KEEPALIVE 22 /* response type for keep alive conditions */
-#define CPC_MSG_T_CANERROR 23 /* response type for bus error conditions */
-#define CPC_MSG_T_DISCONNECTED 24 /* response type for a disconnected interface */
-#define CPC_MSG_T_ERR_COUNTER 25 /* RX/TX error counter of CAN controller */
-
-#define CPC_MSG_T_FIRMWARE 100 /* response type for USB firmware download */
-
-/*
- * Messages from the PC to the CPC interface contain a command field
- * Most of the command types are wrapped by the library functions and have therefore
- * normally not to be used.
- * However, programmers who wish to circumvent the library and talk directly
- * to the drivers (mainly Linux programmers) can use the following
- * command types:
- */
-#define CPC_CMD_T_CAN 1 /* CAN data frame */
-#define CPC_CMD_T_CONTROL 3 /* used for control of interface/driver behaviour */
-#define CPC_CMD_T_CAN_PRMS 6 /* set CAN parameters */
-#define CPC_CMD_T_CLEARBUF 8 /* clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead */
-#define CPC_CMD_T_INQ_CAN_PARMS 11 /* inquire actual CAN parameters */
-#define CPC_CMD_T_FILTER_PRMS 12 /* set filter parameter */
-#define CPC_CMD_T_RTR 13 /* CAN remote frame */
-#define CPC_CMD_T_CANSTATE 14 /* CAN state message */
-#define CPC_CMD_T_XCAN 15 /* XCAN data frame */
-#define CPC_CMD_T_XRTR 16 /* XCAN remote frame */
-#define CPC_CMD_T_RESET 17 /* used to reset CAN-Controller */
-#define CPC_CMD_T_INQ_INFO 18 /* miscellanous information strings */
-#define CPC_CMD_T_OPEN_CHAN 19 /* open a channel */
-#define CPC_CMD_T_CLOSE_CHAN 20 /* close a channel */
-#define CPC_CMD_T_CNTBUF 21 /* this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead */
-#define CPC_CMD_T_CAN_EXIT 200 /* exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1) */
-
-#define CPC_CMD_T_INQ_MSG_QUEUE_CNT CPC_CMD_T_CNTBUF /* inquires the count of elements in the message queue */
-#define CPC_CMD_T_INQ_ERR_COUNTER 25 /* request the CAN controllers error counter */
-#define CPC_CMD_T_CLEAR_MSG_QUEUE CPC_CMD_T_CLEARBUF /* clear CPC_MSG queue */
-#define CPC_CMD_T_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
-#define CPC_CMD_T_FIRMWARE 100 /* reserved, must not be used */
-#define CPC_CMD_T_USB_RESET 101 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_NOTIFY 102 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_SETUP 103 /* reserved, must not be used */
-#define CPC_CMD_T_ABORT 255 /* Normally not to be used */
-
-/* definitions for CPC_MSG_T_INFO information sources */
-#define CPC_INFOMSG_T_UNKNOWN_SOURCE 0
-#define CPC_INFOMSG_T_INTERFACE 1
-#define CPC_INFOMSG_T_DRIVER 2
-#define CPC_INFOMSG_T_LIBRARY 3
-
-/* information types */
-#define CPC_INFOMSG_T_UNKNOWN_TYPE 0
-#define CPC_INFOMSG_T_VERSION 1
-#define CPC_INFOMSG_T_SERIAL 2
-
-/* definitions for controller types */
-#define PCA82C200 1 /* Philips basic CAN controller, replaced by SJA1000 */
-#define SJA1000 2 /* Philips basic CAN controller */
-#define AN82527 3 /* Intel full CAN controller */
-#define M16C_BASIC 4 /* M16C controller running in basic CAN (not full CAN) mode */
-
-/* channel open error codes */
-#define CPC_ERR_NO_FREE_CHANNEL -1 /* no more free space within the channel array */
-#define CPC_ERR_CHANNEL_ALREADY_OPEN -2 /* the channel is already open */
-#define CPC_ERR_CHANNEL_NOT_ACTIVE -3 /* access to a channel not active failed */
-#define CPC_ERR_NO_DRIVER_PRESENT -4 /* no driver at the location searched by the library */
-#define CPC_ERR_NO_INIFILE_PRESENT -5 /* the library could not find the inifile */
-#define CPC_ERR_WRONG_PARAMETERS -6 /* wrong parameters in the inifile */
-#define CPC_ERR_NO_INTERFACE_PRESENT -7 /* 1. The specified interface is not connected */
- /* 2. The interface (mostly CPC-USB) was disconnected upon operation */
-#define CPC_ERR_NO_MATCHING_CHANNEL -8 /* the driver couldn't find a matching channel */
-#define CPC_ERR_NO_BUFFER_AVAILABLE -9 /* the driver couldn't allocate buffer for messages */
-#define CPC_ERR_NO_INTERRUPT -10 /* the requested interrupt couldn't be claimed */
-#define CPC_ERR_NO_MATCHING_INTERFACE -11 /* no interface type related to this channel was found */
-#define CPC_ERR_NO_RESOURCES -12 /* the requested resources could not be claimed */
-#define CPC_ERR_SOCKET -13 /* error concerning TCP sockets */
-
-/* init error codes */
-#define CPC_ERR_WRONG_CONTROLLER_TYPE -14 /* wrong CAN controller type within initialization */
-#define CPC_ERR_NO_RESET_MODE -15 /* the controller could not be set into reset mode */
-#define CPC_ERR_NO_CAN_ACCESS -16 /* the CAN controller could not be accessed */
-
-/* transmit error codes */
-#define CPC_ERR_CAN_WRONG_ID -20 /* the provided CAN id is too big */
-#define CPC_ERR_CAN_WRONG_LENGTH -21 /* the provided CAN length is too long */
-#define CPC_ERR_CAN_NO_TRANSMIT_BUF -22 /* the transmit buffer was occupied */
-#define CPC_ERR_CAN_TRANSMIT_TIMEOUT -23 /* The message could not be sent within a */
- /* specified time */
-
-/* other error codes */
-#define CPC_ERR_SERVICE_NOT_SUPPORTED -30 /* the requested service is not supported by the interface */
-#define CPC_ERR_IO_TRANSFER -31 /* a transmission error down to the driver occurred */
-#define CPC_ERR_TRANSMISSION_FAILED -32 /* a transmission error down to the interface occurred */
-#define CPC_ERR_TRANSMISSION_TIMEOUT -33 /* a timeout occurred within transmission to the interface */
-#define CPC_ERR_OP_SYS_NOT_SUPPORTED -35 /* the operating system is not supported */
-#define CPC_ERR_UNKNOWN -40 /* an unknown error ocurred (mostly IOCTL errors) */
-
-#define CPC_ERR_LOADING_DLL -50 /* the library 'cpcwin.dll' could not be loaded */
-#define CPC_ERR_ASSIGNING_FUNCTION -51 /* the specified function could not be assigned */
-#define CPC_ERR_DLL_INITIALIZATION -52 /* the DLL was not initialized correctly */
-#define CPC_ERR_MISSING_LICFILE -55 /* the file containing the licenses does not exist */
-#define CPC_ERR_MISSING_LICENSE -56 /* a required license was not found */
-
-/* CAN state bit values. Ignore any bits not listed */
-#define CPC_CAN_STATE_BUSOFF 0x80
-#define CPC_CAN_STATE_ERROR 0x40
-
-/* Mask to help ignore undefined bits */
-#define CPC_CAN_STATE_MASK 0xc0
-
-/*
- * CAN-Message representation in a CPC_MS
- * Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR
- * or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR
- */
-typedef struct CPC_CAN_MSG {
- u32 id;
- u8 length;
- u8 msg[8];
-} CPC_CAN_MSG_T;
-
-/* representation of the CAN parameters for the PCA82C200 controller */
-typedef struct CPC_PCA82C200_PARAMS {
- u8 acc_code; /* Acceptance-code for receive, Standard: 0 */
- u8 acc_mask; /* Acceptance-mask for receive, Standard: 0xff (everything) */
- u8 btr0; /* Bus-timing register 0 */
- u8 btr1; /* Bus-timing register 1 */
- u8 outp_contr; /* Output-control register */
-} CPC_PCA82C200_PARAMS_T;
-
-/* representation of the CAN parameters for the SJA1000 controller */
-typedef struct CPC_SJA1000_PARAMS {
- u8 mode; /* enables single or dual acceptance filtering */
- u8 acc_code0; /* Acceptance-code for receive, Standard: 0 */
- u8 acc_code1;
- u8 acc_code2;
- u8 acc_code3;
- u8 acc_mask0; /* Acceptance-mask for receive, Standard: 0xff (everything) */
- u8 acc_mask1;
- u8 acc_mask2;
- u8 acc_mask3;
- u8 btr0; /* Bus-timing register 0 */
- u8 btr1; /* Bus-timing register 1 */
- u8 outp_contr; /* Output-control register */
-} CPC_SJA1000_PARAMS_T;
-
-/*
- * representation of the CAN parameters for the M16C controller
- * in basic CAN mode (means no full CAN)
- */
-typedef struct CPC_M16C_BASIC_PARAMS {
- u8 con0;
- u8 con1;
- u8 ctlr0;
- u8 ctlr1;
- u8 clk;
- u8 acc_std_code0;
- u8 acc_std_code1;
- u8 acc_ext_code0;
- u8 acc_ext_code1;
- u8 acc_ext_code2;
- u8 acc_ext_code3;
- u8 acc_std_mask0;
- u8 acc_std_mask1;
- u8 acc_ext_mask0;
- u8 acc_ext_mask1;
- u8 acc_ext_mask2;
- u8 acc_ext_mask3;
-} CPC_M16C_BASIC_PARAMS_T;
-
-/* CAN params message representation */
-typedef struct CPC_CAN_PARAMS {
- u8 cc_type; /* represents the controller type */
- union {
- CPC_M16C_BASIC_PARAMS_T m16c_basic;
- CPC_SJA1000_PARAMS_T sja1000;
- CPC_PCA82C200_PARAMS_T pca82c200;
- } cc_params;
-} CPC_CAN_PARAMS_T;
-
-/* CHAN init params representation */
-typedef struct CPC_CHAN_PARAMS {
- int fd;
-} CPC_CHAN_PARAMS_T;
-
-/* CAN init params message representation */
-typedef struct CPC_INIT_PARAMS {
- CPC_CHAN_PARAMS_T chanparams;
- CPC_CAN_PARAMS_T canparams;
-} CPC_INIT_PARAMS_T;
-
-/* structure for confirmed message handling */
-typedef struct CPC_CONFIRM {
- u8 result; /* error code */
-} CPC_CONFIRM_T;
-
-/* structure for information requests */
-typedef struct CPC_INFO {
- u8 source; /* interface, driver or library */
- u8 type; /* version or serial number */
- char msg[CPC_MSG_LEN - 2]; /* string holding the requested information */
-} CPC_INFO_T;
-
-/*
- * OVERRUN
- * In general two types of overrun may occur.
- * A hardware overrun, where the CAN controller
- * lost a message, because the interrupt was
- * not handled before the next messgae comes in.
- * Or a software overrun, where i.e. a received
- * message could not be stored in the CPC_MSG
- * buffer.
- */
-
-/* After a software overrun has occurred
- * we wait until we have CPC_OVR_GAP slots
- * free in the CPC_MSG buffer.
- */
-#define CPC_OVR_GAP 10
-
-/*
- * Two types of software overrun may occur.
- * A received CAN message or a CAN state event
- * can cause an overrun.
- * Note: A CPC_CMD which would normally store
- * its result immediately in the CPC_MSG
- * queue may fail, because the message queue is full.
- * This will not generate an overrun message, but
- * will halt command execution, until this command
- * is able to store its message in the message queue.
- */
-#define CPC_OVR_EVENT_CAN 0x01
-#define CPC_OVR_EVENT_CANSTATE 0x02
-#define CPC_OVR_EVENT_BUSERROR 0x04
-
-/*
- * If the CAN controller lost a message
- * we indicate it with the highest bit
- * set in the count field.
- */
-#define CPC_OVR_HW 0x80
-
-/* structure for overrun conditions */
-typedef struct {
- u8 event;
- u8 count;
-} CPC_OVERRUN_T;
-
-/*
- * CAN errors
- * Each CAN controller type has different
- * registers to record errors.
- * Therefor a structure containing the specific
- * errors is set up for each controller here
- */
-
-/*
- * SJA1000 error structure
- * see the SJA1000 datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_SJA1000_CAN_ERROR {
- u8 ecc; /* error capture code register */
- u8 rxerr; /* RX error counter register */
- u8 txerr; /* TX error counter register */
-} CPC_SJA1000_CAN_ERROR_T;
-
-/*
- * M16C error structure
- * see the M16C datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_M16C_CAN_ERROR {
- u8 tbd; /* to be defined */
-} CPC_M16C_CAN_ERROR_T;
-
-/* structure for CAN error conditions */
-#define CPC_CAN_ECODE_ERRFRAME 0x01
-typedef struct CPC_CAN_ERROR {
- u8 ecode;
- struct {
- u8 cc_type; /* CAN controller type */
- union {
- CPC_SJA1000_CAN_ERROR_T sja1000;
- CPC_M16C_CAN_ERROR_T m16c;
- } regs;
- } cc;
-} CPC_CAN_ERROR_T;
-
-/*
- * Structure containing RX/TX error counter.
- * This structure is used to request the
- * values of the CAN controllers TX and RX
- * error counter.
- */
-typedef struct CPC_CAN_ERR_COUNTER {
- u8 rx;
- u8 tx;
-} CPC_CAN_ERR_COUNTER_T;
-
-/* If this flag is set, transmissions from PC to CPC are protected against loss */
-#define CPC_SECURE_TO_CPC 0x01
-
-/* If this flag is set, transmissions from CPC to PC are protected against loss */
-#define CPC_SECURE_TO_PC 0x02
-
-/* If this flag is set, the CAN-transmit buffer is checked to be free before sending a message */
-#define CPC_SECURE_SEND 0x04
-
-/*
- * If this flag is set, the transmission complete flag is checked
- * after sending a message
- * THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS
- */
-#define CPC_SECURE_TRANSMIT 0x08
-
-/* main message type used between library and application */
-typedef struct CPC_MSG {
- u8 type; /* type of message */
- u8 length; /* length of data within union 'msg' */
- u8 msgid; /* confirmation handle */
- u32 ts_sec; /* timestamp in seconds */
- u32 ts_nsec; /* timestamp in nano seconds */
- union {
- u8 generic[CPC_MSG_LEN];
- CPC_CAN_MSG_T canmsg;
- CPC_CAN_PARAMS_T canparams;
- CPC_CONFIRM_T confirmation;
- CPC_INFO_T info;
- CPC_OVERRUN_T overrun;
- CPC_CAN_ERROR_T error;
- CPC_CAN_ERR_COUNTER_T err_counter;
- u8 busload;
- u8 canstate;
- } msg;
-} CPC_MSG_T;
-
-#endif /* CPC_HEADER */
+++ /dev/null
-/*
- * CPCLIB
- *
- * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-#ifndef CPC_INT_H
-#define CPC_INT_H
-
-#include <linux/wait.h>
-
-#define CPC_MSG_BUF_CNT 1500
-
-#define CPC_PROC_DIR "driver/"
-
-#undef dbg
-#undef err
-#undef info
-
-/* Use our own dbg macro */
-#define dbg(format, arg...) do { if (debug) printk( KERN_INFO format "\n" , ## arg); } while (0)
-#define err(format, arg...) do { printk( KERN_INFO "ERROR " format "\n" , ## arg); } while (0)
-#define info(format, arg...) do { printk( KERN_INFO format "\n" , ## arg); } while (0)
-
-/* Macros help using of our buffers */
-#define IsBufferFull(x) (!(x)->WnR) && ((x)->iidx == (x)->oidx)
-#define IsBufferEmpty(x) ((x)->WnR) && ((x)->iidx == (x)->oidx)
-#define IsBufferNotEmpty(x) (!(x)->WnR) || ((x)->iidx != (x)->oidx)
-#define ResetBuffer(x) do { (x)->oidx = (x)->iidx=0; (x)->WnR = 1; } while(0);
-
-#define CPC_BufWriteAllowed ((chan->oidx != chan->iidx) || chan->WnR)
-
-typedef void (*chan_write_byte_t) (void *chan, unsigned int reg,
- unsigned char val);
-typedef unsigned char (*chan_read_byte_t) (void *chan, unsigned int reg);
-
-typedef struct CPC_CHAN {
- void __iomem * canBase; /* base address of SJA1000 */
- chan_read_byte_t read_byte; /* CAN controller read access routine */
- chan_write_byte_t write_byte; /* CAN controller write access routine */
- CPC_MSG_T *buf; /* buffer for CPC msg */
- unsigned int iidx;
- unsigned int oidx;
- unsigned int WnR;
- unsigned int minor;
- unsigned int locked;
- unsigned int irqDisabled;
-
- unsigned char cpcCtrlCANMessage;
- unsigned char cpcCtrlCANState;
- unsigned char cpcCtrlBUSState;
-
- unsigned char controllerType;
-
- unsigned long ovrTimeSec;
- unsigned long ovrTimeNSec;
- unsigned long ovrLockedBuffer;
- CPC_OVERRUN_T ovr;
-
- /* for debugging only */
- unsigned int handledIrqs;
- unsigned int lostMessages;
-
- unsigned int sentStdCan;
- unsigned int sentExtCan;
- unsigned int sentStdRtr;
- unsigned int sentExtRtr;
-
- unsigned int recvStdCan;
- unsigned int recvExtCan;
- unsigned int recvStdRtr;
- unsigned int recvExtRtr;
-
- wait_queue_head_t *CPCWait_q;
-
- void *private;
-} CPC_CHAN_T;
-
-#endif
+++ /dev/null
-/* Header for CPC-USB Driver ********************
- * Copyright 1999, 2000, 2001
- *
- * Company: EMS Dr. Thomas Wuensche
- * Sonnenhang 3
- * 85304 Ilmmuenster
- * Phone: +49-8441-490260
- * Fax: +49-8441-81860
- * email: support@ems-wuensche.com
- * WWW: www.ems-wuensche.com
- */
-
-#ifndef CPCUSB_H
-#define CPCUSB_H
-
-#undef err
-#undef dbg
-#undef info
-
-/* Use our own dbg macro */
-#define dbg(format, arg...) do { if (debug) printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
-#define info(format, arg...) do { printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
-#define err(format, arg...) do { printk(KERN_INFO "CPC-USB(ERROR): " format "\n" , ## arg); } while (0)
-
-#define CPC_USB_CARD_CNT 4
-
-typedef struct CPC_USB_READ_URB {
- unsigned char *buffer; /* the buffer to send data */
- size_t size; /* the size of the send buffer */
- struct urb *urb; /* the urb used to send data */
-} CPC_USB_READ_URB_T;
-
-typedef struct CPC_USB_WRITE_URB {
- unsigned char *buffer; /* the buffer to send data */
- size_t size; /* the size of the send buffer */
- struct urb *urb; /* the urb used to send data */
- atomic_t busy; /* true if write urb is busy */
- struct completion finished; /* wait for the write to finish */
-} CPC_USB_WRITE_URB_T;
-
-#define CPC_USB_URB_CNT 10
-
-typedef struct CPC_USB {
- struct usb_device *udev; /* save off the usb device pointer */
- struct usb_interface *interface; /* the interface for this device */
- unsigned char minor; /* the starting minor number for this device */
- unsigned char num_ports; /* the number of ports this device has */
- int num_intr_in; /* number of interrupt in endpoints we have */
- int num_bulk_in; /* number of bulk in endpoints we have */
- int num_bulk_out; /* number of bulk out endpoints we have */
-
- CPC_USB_READ_URB_T urbs[CPC_USB_URB_CNT];
-
- unsigned char intr_in_buffer[4]; /* interrupt transfer buffer */
- struct urb *intr_in_urb; /* interrupt transfer urb */
-
- CPC_USB_WRITE_URB_T wrUrbs[CPC_USB_URB_CNT];
-
- int open; /* if the port is open or not */
- int present; /* if the device is not disconnected */
- struct semaphore sem; /* locks this structure */
-
- int free_slots; /* free send slots of CPC-USB */
- int idx;
-
- spinlock_t slock;
-
- char serialNumber[128]; /* serial number */
- int productId; /* product id to differ between M16C and LPC2119 */
- CPC_CHAN_T *chan;
-} CPC_USB_T;
-
-#define CPCTable CPCUSB_Table
-
-#define CPC_DRIVER_VERSION "0.724"
-#define CPC_DRIVER_SERIAL "not applicable"
-
-#define OBUF_SIZE 255 /* 4096 */
-
-/* read timeouts -- RD_NAK_TIMEOUT * RD_EXPIRE = Number of seconds */
-#define RD_NAK_TIMEOUT (10*HZ) /* Default number of X seconds to wait */
-#define RD_EXPIRE 12 /* Number of attempts to wait X seconds */
-
-#define CPC_USB_BASE_MNR 0 /* CPC-USB start at minor 0 */
-
-#endif
+++ /dev/null
-#ifndef _SJA2M16C_H
-#define _SJA2M16C_H
-
-#include "cpc.h"
-
-#define BAUDRATE_TOLERANCE_PERCENT 1
-#define SAMPLEPOINT_TOLERANCE_PERCENT 5
-#define SAMPLEPOINT_UPPER_LIMIT 88
-
-/* M16C parameters */
-struct FIELD_C0CONR {
- unsigned int brp:4;
- unsigned int sam:1;
- unsigned int pr:3;
- unsigned int dummy:8;
-};
-struct FIELD_C1CONR {
- unsigned int ph1:3;
- unsigned int ph2:3;
- unsigned int sjw:2;
- unsigned int dummy:8;
-};
-typedef union C0CONR {
- unsigned char c0con;
- struct FIELD_C0CONR bc0con;
-} C0CONR_T;
-typedef union C1CONR {
- unsigned char c1con;
- struct FIELD_C1CONR bc1con;
-} C1CONR_T;
-
-#define SJA_TSEG1 ((pParams->btr1 & 0x0f)+1)
-#define SJA_TSEG2 (((pParams->btr1 & 0x70)>>4)+1)
-#define SJA_BRP ((pParams->btr0 & 0x3f)+1)
-#define SJA_SJW ((pParams->btr0 & 0xc0)>>6)
-#define SJA_SAM ((pParams->btr1 & 0x80)>>7)
-int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2);
-int samplepoint_m16c(int brp, int pr, int ph1, int ph2);
-int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T *pMsg);
-
-#endif
+++ /dev/null
-/****************************************************************************
-*
-* Copyright (c) 2003,2004 by EMS Dr. Thomas Wuensche
-*
-* - All rights reserved -
-*
-* This code is provided "as is" without warranty of any kind, either
-* expressed or implied, including but not limited to the liability
-* concerning the freedom from material defects, the fitness for parti-
-* cular purposes or the freedom of proprietary rights of third parties.
-*
-*****************************************************************************
-* Module name.: cpcusb
-*****************************************************************************
-* Include file: cpc.h
-*****************************************************************************
-* Project.....: Windows Driver Development Kit
-* Filename....: sja2m16c.cpp
-* Authors.....: (GU) Gerhard Uttenthaler
-* (CS) Christian Schoett
-*****************************************************************************
-* Short descr.: converts baudrate between SJA1000 and M16C
-*****************************************************************************
-* Description.: handles the baudrate conversion from SJA1000 parameters to
-* M16C parameters
-*****************************************************************************
-* Address : EMS Dr. Thomas Wuensche
-* Sonnenhang 3
-* D-85304 Ilmmuenster
-* Tel. : +49-8441-490260
-* Fax. : +49-8441-81860
-* email: support@ems-wuensche.com
-*****************************************************************************
-* History
-*****************************************************************************
-* Version Date Auth Remark
-*
-* 01.00 ?? GU - initial release
-* 01.10 ?????????? CS - adapted to fit into the USB Windows driver
-* 02.00 18.08.2004 GU - improved the baudrate calculating algorithm
-* - implemented acceptance filtering
-* 02.10 10.09.2004 CS - adapted to fit into the USB Windows driver
-*****************************************************************************
-* ToDo's
-*****************************************************************************
-*/
-
-/****************************************************************************/
-/* I N C L U D E S
-*/
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <asm/uaccess.h>
-#include <linux/usb.h>
-
-#include "cpc.h"
-#include "cpc_int.h"
-#include "cpcusb.h"
-
-#include "sja2m16c.h"
-
-/*********************************************************************/
-int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2)
-{
- return (16000000 / (1 << clk)) / 2 / (brp + 1) / (1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1);
-}
-
-
-/*********************************************************************/
-int samplepoint_m16c(int brp, int pr, int ph1, int ph2)
-{
- return (100 * (1 + pr + 1 + ph1 + 1)) / (1 + pr + 1 + ph1 + 1 +
- ph2 + 1);
-}
-
-
-/****************************************************************************
-* Function.....: SJA1000_TO_M16C_BASIC_Params
-*
-* Task.........: This routine converts SJA1000 CAN btr parameters into M16C
-* parameters based on the sample point and the error. In
-* addition it converts the acceptance filter parameters to
-* suit the M16C parameters
-*
-* Parameters...: None
-*
-* Return values: None
-*
-* Comments.....:
-*****************************************************************************
-* History
-*****************************************************************************
-* 19.01.2005 CS - modifed the conversion of SJA1000 filter params into
-* M16C params. Due to compatibility reasons with the
-* older 82C200 CAN controller the SJA1000
-****************************************************************************/
-int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T * in)
-{
- int sjaBaudrate;
- int sjaSamplepoint;
- int *baudrate_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
- int *samplepoint_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
- int baudrate_error_merk;
- int clk, brp, pr, ph1, ph2;
- int clk_merk, brp_merk, pr_merk, ph1_merk, ph2_merk;
- int index;
- unsigned char acc_code0, acc_code1, acc_code2, acc_code3;
- unsigned char acc_mask0, acc_mask1, acc_mask2, acc_mask3;
- CPC_MSG_T * out;
- C0CONR_T c0con;
- C1CONR_T c1con;
- int tmpAccCode;
- int tmpAccMask;
-
- // we have to convert the parameters into M16C parameters
- CPC_SJA1000_PARAMS_T * pParams;
-
- // check if the type is CAN parameters and if we have to convert the given params
- if (in->type != CPC_CMD_T_CAN_PRMS
- || in->msg.canparams.cc_type != SJA1000)
- return 0;
- pParams =
- (CPC_SJA1000_PARAMS_T *) & in->msg.canparams.cc_params.sja1000;
- acc_code0 = pParams->acc_code0;
- acc_code1 = pParams->acc_code1;
- acc_code2 = pParams->acc_code2;
- acc_code3 = pParams->acc_code3;
- acc_mask0 = pParams->acc_mask0;
- acc_mask1 = pParams->acc_mask1;
- acc_mask2 = pParams->acc_mask2;
- acc_mask3 = pParams->acc_mask3;
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("acc_code0: %2.2Xh\n", acc_code0);
- info("acc_code1: %2.2Xh\n", acc_code1);
- info("acc_code2: %2.2Xh\n", acc_code2);
- info("acc_code3: %2.2Xh\n", acc_code3);
- info("acc_mask0: %2.2Xh\n", acc_mask0);
- info("acc_mask1: %2.2Xh\n", acc_mask1);
- info("acc_mask2: %2.2Xh\n", acc_mask2);
- info("acc_mask3: %2.2Xh\n", acc_mask3);
-
-#endif /* */
- if (!
- (baudrate_error =
- (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
- err("Could not allocate memory\n");
- return -3;
- }
- if (!
- (samplepoint_error =
- (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
- err("Could not allocate memory\n");
- vfree(baudrate_error);
- return -3;
- }
- memset(baudrate_error, 0xff, sizeof(baudrate_error));
- memset(samplepoint_error, 0xff, sizeof(baudrate_error));
- sjaBaudrate =
- 16000000 / 2 / SJA_BRP / (1 + SJA_TSEG1 + SJA_TSEG2);
- sjaSamplepoint =
- 100 * (1 + SJA_TSEG1) / (1 + SJA_TSEG1 + SJA_TSEG2);
- if (sjaBaudrate == 0) {
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return -2;
- }
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("\nStarting SJA CAN params\n");
- info("-------------------------\n");
- info("TS1 : %2.2Xh TS2 : %2.2Xh\n", SJA_TSEG1, SJA_TSEG2);
- info("BTR0 : %2.2Xh BTR1: %2.2Xh\n", pParams->btr0,
- pParams->btr1);
- info("Baudrate: %d.%dkBaud\n", sjaBaudrate / 1000,
- sjaBaudrate % 1000);
- info("Sample P: 0.%d\n", sjaSamplepoint);
- info("\n");
-
-#endif /* */
- c0con.bc0con.sam = SJA_SAM;
- c1con.bc1con.sjw = SJA_SJW;
-
- // calculate errors for all baudrates
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- baudrate_error[index] =
- 100 *
- abs(baudrate_m16c
- (clk, brp, pr, ph1,
- ph2) -
- sjaBaudrate) /
- sjaBaudrate;
- samplepoint_error[index] =
- abs(samplepoint_m16c
- (brp, pr, ph1,
- ph2) -
- sjaSamplepoint);
-
-#if 0
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c(clk,
- brp, pr,
- ph1,
- ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
- info
- ("clk : %d\n",
- clk);
-
-#endif /* */
- index++;
- }
- }
- }
- }
- }
-
- // mark all baudrate_error entries which are outer limits
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- if ((baudrate_error[index]
- >
- BAUDRATE_TOLERANCE_PERCENT)
- ||
- (samplepoint_error
- [index] >
- SAMPLEPOINT_TOLERANCE_PERCENT)
- ||
- (samplepoint_m16c
- (brp, pr, ph1,
- ph2) >
- SAMPLEPOINT_UPPER_LIMIT))
- {
- baudrate_error
- [index] = -1;
- } else
- if (((1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1) < 8)
- ||
- ((1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1) > 25)) {
- baudrate_error
- [index] = -1;
- }
-
-#if 0
- else {
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c
- (clk, brp, pr,
- ph1, ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
- }
-
-#endif /* */
- index++;
- }
- }
- }
- }
- }
-
- // find list of minimum of baudrate_error within unmarked entries
- clk_merk = brp_merk = pr_merk = ph1_merk = ph2_merk = 0;
- baudrate_error_merk = 100;
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- if (baudrate_error[index]
- != -1) {
- if (baudrate_error
- [index] <
- baudrate_error_merk)
- {
- baudrate_error_merk
- =
- baudrate_error
- [index];
- brp_merk =
- brp;
- pr_merk =
- pr;
- ph1_merk =
- ph1;
- ph2_merk =
- ph2;
- clk_merk =
- clk;
-
-#if 0
- info
- ("brp: %2.2Xh pr: %2.2Xh ph1: %2.2Xh ph2: %2.2Xh\n",
- brp,
- pr,
- ph1,
- ph2);
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c
- (clk,
- brp,
- pr,
- ph1,
- ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
-
-#endif /* */
- }
- }
- index++;
- }
- }
- }
- }
- }
- if (baudrate_error_merk == 100) {
- info("ERROR: Could not convert CAN init parameter\n");
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return -1;
- }
-
- // setting m16c CAN parameter
- c0con.bc0con.brp = brp_merk;
- c0con.bc0con.pr = pr_merk;
- c1con.bc1con.ph1 = ph1_merk;
- c1con.bc1con.ph2 = ph2_merk;
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("\nResulting M16C CAN params\n");
- info("-------------------------\n");
- info("clk : %2.2Xh\n", clk_merk);
- info("ph1 : %2.2Xh ph2: %2.2Xh\n", c1con.bc1con.ph1 + 1,
- c1con.bc1con.ph2 + 1);
- info("pr : %2.2Xh brp: %2.2Xh\n", c0con.bc0con.pr + 1,
- c0con.bc0con.brp + 1);
- info("sjw : %2.2Xh sam: %2.2Xh\n", c1con.bc1con.sjw,
- c0con.bc0con.sam);
- info("co1 : %2.2Xh co0: %2.2Xh\n", c1con.c1con, c0con.c0con);
- info("Baudrate: %d.%dBaud\n",
- baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2) / 1000,
- baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2) % 1000);
- info("Sample P: 0.%d\n",
- samplepoint_m16c(c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2));
- info("\n");
-
-#endif /* */
- out = in;
- out->type = 6;
- out->length = sizeof(CPC_M16C_BASIC_PARAMS_T) + 1;
- out->msg.canparams.cc_type = M16C_BASIC;
- out->msg.canparams.cc_params.m16c_basic.con0 = c0con.c0con;
- out->msg.canparams.cc_params.m16c_basic.con1 = c1con.c1con;
- out->msg.canparams.cc_params.m16c_basic.ctlr0 = 0x4C;
- out->msg.canparams.cc_params.m16c_basic.ctlr1 = 0x00;
- out->msg.canparams.cc_params.m16c_basic.clk = clk_merk;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
- acc_code0;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code1 = acc_code1;
-
-// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
- tmpAccCode = (acc_code1 >> 5) + (acc_code0 << 3);
- out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
- (unsigned char) tmpAccCode;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code1 =
- (unsigned char) (tmpAccCode >> 8);
-
-// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
- ~acc_mask0;
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
- ~acc_mask1;
-
-// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
- tmpAccMask = ((acc_mask1) >> 5) + ((acc_mask0) << 3);
-
-// info("tmpAccMask: 0x%4.4X\n", tmpAccMask);
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
- (unsigned char) ~tmpAccMask;
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
- (unsigned char) ~(tmpAccMask >> 8);
-
-// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code0 =
- (unsigned char) tmpAccCode;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code1 =
- (unsigned char) (tmpAccCode >> 8);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code2 = acc_code2;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code3 = acc_code3;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask0 =
- (unsigned char) ~tmpAccMask;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask1 =
- (unsigned char) ~(tmpAccMask >> 8);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask2 =
- ~acc_mask2;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask3 =
- ~acc_mask3;
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return 0;
-}
-
-
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-
-# Ubuntu 8.04 has CONFIG_SND undefined, so include lum sound/config.h too
-ifeq ($(CONFIG_SND),)
-EXTRA_CFLAGS += -include sound/config.h
-endif
default y if PCMCIA && !M32R # sl811_cs
default y if ARM # SL-811
default y if SUPERH # r8a66597-hcd
- default y if MICROBLAZE
default PCI
# many non-PCI SOC chips embed OHCI
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include "g_zero.h"
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include "u_serial.h"
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include "g_zero.h"
*/
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/ctype.h>
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include <linux/ctype.h>
#include <linux/etherdevice.h>
return 0;
}
-#ifdef CONFIG_PM
-static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM
+static int ohci_hcd_pxa27x_drv_suspend(struct device *dev)
{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
ohci->ohci.next_statechange = jiffies;
- pxa27x_stop_hc(ohci, &pdev->dev);
+ pxa27x_stop_hc(ohci, dev);
hcd->state = HC_STATE_SUSPENDED;
return 0;
}
-static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
+static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+ struct pxaohci_platform_data *inf = dev->platform_data;
int status;
if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
ohci->ohci.next_statechange = jiffies;
- if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
+ if ((status = pxa27x_start_hc(ohci, dev)) < 0)
return status;
+ /* Select Power Management Mode */
+ pxa27x_ohci_select_pmm(ohci, inf->port_mode);
+
ohci_finish_controller_resume(hcd);
return 0;
}
+
+static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = {
+ .suspend = ohci_hcd_pxa27x_drv_suspend,
+ .resume = ohci_hcd_pxa27x_drv_resume,
+};
#endif
/* work with hotplug and coldplug */
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
- .suspend = ohci_hcd_pxa27x_drv_suspend,
- .resume = ohci_hcd_pxa27x_drv_resume,
-#endif
.driver = {
.name = "pxa27x-ohci",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &ohci_hcd_pxa27x_pm_ops,
+#endif
},
};
}
}
+#ifdef CONFIG_PM
static void stop_read_write_urbs(struct usb_serial *serial)
{
int i, j;
return ec ? -EIO : 0;
}
+#else
+#define sierra_suspend NULL
+#define sierra_resume NULL
+#endif
static struct usb_serial_driver sierra_device = {
.driver = {
}
#ifdef CONFIG_PM
-static int da903x_backlight_suspend(struct platform_device *pdev,
- pm_message_t state)
+static int da903x_backlight_suspend(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct backlight_device *bl = platform_get_drvdata(pdev);
return da903x_backlight_set(bl, 0);
}
-static int da903x_backlight_resume(struct platform_device *pdev)
+static int da903x_backlight_resume(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct backlight_device *bl = platform_get_drvdata(pdev);
backlight_update_status(bl);
return 0;
}
-#else
-#define da903x_backlight_suspend NULL
-#define da903x_backlight_resume NULL
+
+static struct dev_pm_ops da903x_backlight_pm_ops = {
+ .suspend = da903x_backlight_suspend,
+ .resume = da903x_backlight_resume,
+};
#endif
static struct platform_driver da903x_backlight_driver = {
.driver = {
.name = "da903x-backlight",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &da903x_backlight_pm_ops,
+#endif
},
.probe = da903x_backlight_probe,
.remove = da903x_backlight_remove,
- .suspend = da903x_backlight_suspend,
- .resume = da903x_backlight_resume,
};
static int __init da903x_backlight_init(void)
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int pxafb_suspend(struct platform_device *dev, pm_message_t state)
+static int pxafb_suspend(struct device *dev)
{
- struct pxafb_info *fbi = platform_get_drvdata(dev);
+ struct pxafb_info *fbi = dev_get_drvdata(dev);
set_ctrlr_state(fbi, C_DISABLE_PM);
return 0;
}
-static int pxafb_resume(struct platform_device *dev)
+static int pxafb_resume(struct device *dev)
{
- struct pxafb_info *fbi = platform_get_drvdata(dev);
+ struct pxafb_info *fbi = dev_get_drvdata(dev);
set_ctrlr_state(fbi, C_ENABLE_PM);
return 0;
}
-#else
-#define pxafb_suspend NULL
-#define pxafb_resume NULL
+
+static struct dev_pm_ops pxafb_pm_ops = {
+ .suspend = pxafb_suspend,
+ .resume = pxafb_resume,
+};
#endif
static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi)
goto failed;
}
+ if (cpu_is_pxa3xx() && inf->acceleration_enabled)
+ fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
+
fbi->backlight_power = inf->pxafb_backlight_power;
fbi->lcd_power = inf->pxafb_lcd_power;
goto failed_fbi;
}
- r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
+ r = request_mem_region(r->start, resource_size(r), dev->name);
if (r == NULL) {
dev_err(&dev->dev, "failed to request I/O memory\n");
ret = -EBUSY;
goto failed_fbi;
}
- fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ fbi->mmio_base = ioremap(r->start, resource_size(r));
if (fbi->mmio_base == NULL) {
dev_err(&dev->dev, "failed to map I/O memory\n");
ret = -EBUSY;
failed_free_io:
iounmap(fbi->mmio_base);
failed_free_res:
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
failed_fbi:
clk_put(fbi->clk);
platform_set_drvdata(dev, NULL);
iounmap(fbi->mmio_base);
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
clk_put(fbi->clk);
kfree(fbi);
static struct platform_driver pxafb_driver = {
.probe = pxafb_probe,
.remove = __devexit_p(pxafb_remove),
- .suspend = pxafb_suspend,
- .resume = pxafb_resume,
.driver = {
.owner = THIS_MODULE,
.name = "pxa2xx-fb",
+#ifdef CONFIG_PM
+ .pm = &pxafb_pm_ops,
+#endif
},
};
dev->mem_start = mem_res->start;
dev->mem_end = mem_res->end;
- len = regs_res->end - regs_res->start;
+ len = resource_size(regs_res);
if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
printk(KERN_ERR "%s: Can't request vlynq registers\n",
dev_name(&dev->dev));
To compile this driver as a module, choose M here: the
module will be called nuc900_wdt.
+config ADX_WATCHDOG
+ tristate "Avionic Design Xanthos watchdog"
+ depends on ARCH_PXA_ADX
+ help
+ Say Y here if you want support for the watchdog timer on Avionic
+ Design Xanthos boards.
+
# AVR32 Architecture
config AT32AP700X_WDT
obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define WATCHDOG_NAME "adx-wdt"
+
+/* register offsets */
+#define ADX_WDT_CONTROL 0x00
+#define ADX_WDT_CONTROL_ENABLE (1 << 0)
+#define ADX_WDT_CONTROL_nRESET (1 << 1)
+#define ADX_WDT_TIMEOUT 0x08
+
+static struct platform_device *adx_wdt_dev;
+static unsigned long driver_open;
+
+#define WDT_STATE_STOP 0
+#define WDT_STATE_START 1
+
+struct adx_wdt {
+ void __iomem *base;
+ unsigned long timeout;
+ unsigned int state;
+ unsigned int wake;
+ spinlock_t lock;
+};
+
+static struct watchdog_info adx_wdt_info = {
+ .identity = "Avionic Design Xanthos Watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+static void adx_wdt_start_locked(struct adx_wdt *wdt)
+{
+ u32 ctrl;
+
+ ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+ ctrl |= ADX_WDT_CONTROL_ENABLE;
+ writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+ wdt->state = WDT_STATE_START;
+}
+
+static void adx_wdt_start(struct adx_wdt *wdt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ adx_wdt_start_locked(wdt);
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_stop_locked(struct adx_wdt *wdt)
+{
+ u32 ctrl;
+
+ ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+ ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+ writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+ wdt->state = WDT_STATE_STOP;
+}
+
+static void adx_wdt_stop(struct adx_wdt *wdt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ adx_wdt_stop_locked(wdt);
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds)
+{
+ unsigned long timeout = seconds * 1000;
+ unsigned long flags;
+ unsigned int state;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ state = wdt->state;
+ adx_wdt_stop_locked(wdt);
+ writel(timeout, wdt->base + ADX_WDT_TIMEOUT);
+
+ if (state == WDT_STATE_START)
+ adx_wdt_start_locked(wdt);
+
+ wdt->timeout = timeout;
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds)
+{
+ *seconds = wdt->timeout / 1000;
+}
+
+static void adx_wdt_keepalive(struct adx_wdt *wdt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT);
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static int adx_wdt_open(struct inode *inode, struct file *file)
+{
+ struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev);
+
+ if (test_and_set_bit(0, &driver_open))
+ return -EBUSY;
+
+ file->private_data = wdt;
+ adx_wdt_set_timeout(wdt, 30);
+ adx_wdt_start(wdt);
+
+ return nonseekable_open(inode, file);
+}
+
+static int adx_wdt_release(struct inode *inode, struct file *file)
+{
+ struct adx_wdt *wdt = file->private_data;
+
+ adx_wdt_stop(wdt);
+ clear_bit(0, &driver_open);
+
+ return 0;
+}
+
+static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct adx_wdt *wdt = file->private_data;
+ void __user *argp = (void __user *)arg;
+ unsigned long __user *p = argp;
+ unsigned long seconds = 0;
+ unsigned int options;
+ long ret = -EINVAL;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info)))
+ return -EFAULT;
+ else
+ return 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ adx_wdt_keepalive(wdt);
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(seconds, p))
+ return -EFAULT;
+
+ adx_wdt_set_timeout(wdt, seconds);
+
+ /* fallthrough */
+ case WDIOC_GETTIMEOUT:
+ adx_wdt_get_timeout(wdt, &seconds);
+ return put_user(seconds, p);
+
+ case WDIOC_SETOPTIONS:
+ if (copy_from_user(&options, argp, sizeof(options)))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ adx_wdt_stop(wdt);
+ ret = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ adx_wdt_start(wdt);
+ ret = 0;
+ }
+
+ return ret;
+
+ default:
+ break;
+ }
+
+ return -ENOTTY;
+}
+
+static ssize_t adx_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ struct adx_wdt *wdt = file->private_data;
+
+ if (len)
+ adx_wdt_keepalive(wdt);
+
+ return len;
+}
+
+static const struct file_operations adx_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = adx_wdt_open,
+ .release = adx_wdt_release,
+ .unlocked_ioctl = adx_wdt_ioctl,
+ .write = adx_wdt_write,
+};
+
+static struct miscdevice adx_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &adx_wdt_fops,
+};
+
+static int __devinit adx_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct adx_wdt *wdt;
+ int ret = 0;
+ u32 ctrl;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt) {
+ dev_err(&pdev->dev, "cannot allocate WDT structure\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&wdt->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot obtain I/O memory region\n");
+ return -ENXIO;
+ }
+
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ res->end - res->start + 1, res->name);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot request I/O memory region\n");
+ return -ENXIO;
+ }
+
+ wdt->base = devm_ioremap_nocache(&pdev->dev, res->start,
+ res->end - res->start + 1);
+ if (!wdt->base) {
+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+ return -ENXIO;
+ }
+
+ /* disable watchdog and reboot on timeout */
+ ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+ ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+ ctrl &= ~ADX_WDT_CONTROL_nRESET;
+ writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+
+ platform_set_drvdata(pdev, wdt);
+ adx_wdt_dev = pdev;
+
+ ret = misc_register(&adx_wdt_miscdev);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot register miscdev on minor %d "
+ "(err=%d)\n", WATCHDOG_MINOR, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devexit adx_wdt_remove(struct platform_device *pdev)
+{
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+ misc_deregister(&adx_wdt_miscdev);
+ adx_wdt_stop(wdt);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static void adx_wdt_shutdown(struct platform_device *pdev)
+{
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+ adx_wdt_stop(wdt);
+}
+
+#ifdef CONFIG_PM
+static int adx_wdt_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+ wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0;
+ adx_wdt_stop(wdt);
+
+ return 0;
+}
+
+static int adx_wdt_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+ if (wdt->wake)
+ adx_wdt_start(wdt);
+
+ return 0;
+}
+
+static struct dev_pm_ops adx_wdt_pm_ops = {
+ .suspend = adx_wdt_suspend,
+ .resume = adx_wdt_resume,
+};
+
+# define ADX_WDT_PM_OPS (&adx_wdt_pm_ops)
+#else
+# define ADX_WDT_PM_OPS NULL
+#endif
+
+static struct platform_driver adx_wdt_driver = {
+ .probe = adx_wdt_probe,
+ .remove = __devexit_p(adx_wdt_remove),
+ .shutdown = adx_wdt_shutdown,
+ .driver = {
+ .name = WATCHDOG_NAME,
+ .owner = THIS_MODULE,
+ .pm = ADX_WDT_PM_OPS,
+ },
+};
+
+static int __init adx_wdt_init(void)
+{
+ return platform_driver_register(&adx_wdt_driver);
+}
+
+static void __exit adx_wdt_exit(void)
+{
+ platform_driver_unregister(&adx_wdt_driver);
+}
+
+module_init(adx_wdt_init);
+module_exit(adx_wdt_exit);
+
+MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
See <http://v9fs.sf.net> for more information.
If unsure, say N.
+
+config 9P_FSCACHE
+ bool "Enable 9P client caching support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on 9P_FS=m && FSCACHE || 9P_FS=y && FSCACHE=y
+ help
+ Choose Y here to enable persistent, read-only local
+ caching support for 9p clients using FS-Cache
+
vfs_dir.o \
vfs_dentry.o \
v9fs.o \
- fid.o \
+ fid.o
+9p-$(CONFIG_9P_FSCACHE) += cache.o
--- /dev/null
+/*
+ * V9FS cache definitions.
+ *
+ * Copyright (C) 2009 by Abhishek Kulkarni <adkulkar@umail.iu.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to:
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA 02111-1301 USA
+ *
+ */
+
+#include <linux/jiffies.h>
+#include <linux/file.h>
+#include <linux/stat.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <net/9p/9p.h>
+
+#include "v9fs.h"
+#include "cache.h"
+
+#define CACHETAG_LEN 11
+
+struct kmem_cache *vcookie_cache;
+
+struct fscache_netfs v9fs_cache_netfs = {
+ .name = "9p",
+ .version = 0,
+};
+
+static void init_once(void *foo)
+{
+ struct v9fs_cookie *vcookie = (struct v9fs_cookie *) foo;
+ vcookie->fscache = NULL;
+ vcookie->qid = NULL;
+ inode_init_once(&vcookie->inode);
+}
+
+/**
+ * v9fs_init_vcookiecache - initialize a cache for vcookies to maintain
+ * vcookie to inode mapping
+ *
+ * Returns 0 on success.
+ */
+
+static int v9fs_init_vcookiecache(void)
+{
+ vcookie_cache = kmem_cache_create("vcookie_cache",
+ sizeof(struct v9fs_cookie),
+ 0, (SLAB_RECLAIM_ACCOUNT|
+ SLAB_MEM_SPREAD),
+ init_once);
+ if (!vcookie_cache)
+ return -ENOMEM;
+
+ return 0;
+}
+
+/**
+ * v9fs_destroy_vcookiecache - destroy the cache of vcookies
+ *
+ */
+
+static void v9fs_destroy_vcookiecache(void)
+{
+ kmem_cache_destroy(vcookie_cache);
+}
+
+int __v9fs_cache_register(void)
+{
+ int ret;
+ ret = v9fs_init_vcookiecache();
+ if (ret < 0)
+ return ret;
+
+ return fscache_register_netfs(&v9fs_cache_netfs);
+}
+
+void __v9fs_cache_unregister(void)
+{
+ v9fs_destroy_vcookiecache();
+ fscache_unregister_netfs(&v9fs_cache_netfs);
+}
+
+/**
+ * v9fs_random_cachetag - Generate a random tag to be associated
+ * with a new cache session.
+ *
+ * The value of jiffies is used for a fairly randomly cache tag.
+ */
+
+static
+int v9fs_random_cachetag(struct v9fs_session_info *v9ses)
+{
+ v9ses->cachetag = kmalloc(CACHETAG_LEN, GFP_KERNEL);
+ if (!v9ses->cachetag)
+ return -ENOMEM;
+
+ return scnprintf(v9ses->cachetag, CACHETAG_LEN, "%lu", jiffies);
+}
+
+static uint16_t v9fs_cache_session_get_key(const void *cookie_netfs_data,
+ void *buffer, uint16_t bufmax)
+{
+ struct v9fs_session_info *v9ses;
+ uint16_t klen = 0;
+
+ v9ses = (struct v9fs_session_info *)cookie_netfs_data;
+ P9_DPRINTK(P9_DEBUG_FSC, "session %p buf %p size %u", v9ses,
+ buffer, bufmax);
+
+ if (v9ses->cachetag)
+ klen = strlen(v9ses->cachetag);
+
+ if (klen > bufmax)
+ return 0;
+
+ memcpy(buffer, v9ses->cachetag, klen);
+ P9_DPRINTK(P9_DEBUG_FSC, "cache session tag %s", v9ses->cachetag);
+ return klen;
+}
+
+const struct fscache_cookie_def v9fs_cache_session_index_def = {
+ .name = "9P.session",
+ .type = FSCACHE_COOKIE_TYPE_INDEX,
+ .get_key = v9fs_cache_session_get_key,
+};
+
+void v9fs_cache_session_get_cookie(struct v9fs_session_info *v9ses)
+{
+ /* If no cache session tag was specified, we generate a random one. */
+ if (!v9ses->cachetag)
+ v9fs_random_cachetag(v9ses);
+
+ v9ses->fscache = fscache_acquire_cookie(v9fs_cache_netfs.primary_index,
+ &v9fs_cache_session_index_def,
+ v9ses);
+ P9_DPRINTK(P9_DEBUG_FSC, "session %p get cookie %p", v9ses,
+ v9ses->fscache);
+}
+
+void v9fs_cache_session_put_cookie(struct v9fs_session_info *v9ses)
+{
+ P9_DPRINTK(P9_DEBUG_FSC, "session %p put cookie %p", v9ses,
+ v9ses->fscache);
+ fscache_relinquish_cookie(v9ses->fscache, 0);
+ v9ses->fscache = NULL;
+}
+
+
+static uint16_t v9fs_cache_inode_get_key(const void *cookie_netfs_data,
+ void *buffer, uint16_t bufmax)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+ memcpy(buffer, &vcookie->qid->path, sizeof(vcookie->qid->path));
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get key %llu", &vcookie->inode,
+ vcookie->qid->path);
+ return sizeof(vcookie->qid->path);
+}
+
+static void v9fs_cache_inode_get_attr(const void *cookie_netfs_data,
+ uint64_t *size)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+ *size = i_size_read(&vcookie->inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get attr %llu", &vcookie->inode,
+ *size);
+}
+
+static uint16_t v9fs_cache_inode_get_aux(const void *cookie_netfs_data,
+ void *buffer, uint16_t buflen)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+ memcpy(buffer, &vcookie->qid->version, sizeof(vcookie->qid->version));
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get aux %u", &vcookie->inode,
+ vcookie->qid->version);
+ return sizeof(vcookie->qid->version);
+}
+
+static enum
+fscache_checkaux v9fs_cache_inode_check_aux(void *cookie_netfs_data,
+ const void *buffer,
+ uint16_t buflen)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+
+ if (buflen != sizeof(vcookie->qid->version))
+ return FSCACHE_CHECKAUX_OBSOLETE;
+
+ if (memcmp(buffer, &vcookie->qid->version,
+ sizeof(vcookie->qid->version)))
+ return FSCACHE_CHECKAUX_OBSOLETE;
+
+ return FSCACHE_CHECKAUX_OKAY;
+}
+
+static void v9fs_cache_inode_now_uncached(void *cookie_netfs_data)
+{
+ struct v9fs_cookie *vcookie = cookie_netfs_data;
+ struct pagevec pvec;
+ pgoff_t first;
+ int loop, nr_pages;
+
+ pagevec_init(&pvec, 0);
+ first = 0;
+
+ for (;;) {
+ nr_pages = pagevec_lookup(&pvec, vcookie->inode.i_mapping,
+ first,
+ PAGEVEC_SIZE - pagevec_count(&pvec));
+ if (!nr_pages)
+ break;
+
+ for (loop = 0; loop < nr_pages; loop++)
+ ClearPageFsCache(pvec.pages[loop]);
+
+ first = pvec.pages[nr_pages - 1]->index + 1;
+
+ pvec.nr = nr_pages;
+ pagevec_release(&pvec);
+ cond_resched();
+ }
+}
+
+const struct fscache_cookie_def v9fs_cache_inode_index_def = {
+ .name = "9p.inode",
+ .type = FSCACHE_COOKIE_TYPE_DATAFILE,
+ .get_key = v9fs_cache_inode_get_key,
+ .get_attr = v9fs_cache_inode_get_attr,
+ .get_aux = v9fs_cache_inode_get_aux,
+ .check_aux = v9fs_cache_inode_check_aux,
+ .now_uncached = v9fs_cache_inode_now_uncached,
+};
+
+void v9fs_cache_inode_get_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie;
+ struct v9fs_session_info *v9ses;
+
+ if (!S_ISREG(inode->i_mode))
+ return;
+
+ vcookie = v9fs_inode2cookie(inode);
+ if (vcookie->fscache)
+ return;
+
+ v9ses = v9fs_inode2v9ses(inode);
+ vcookie->fscache = fscache_acquire_cookie(v9ses->fscache,
+ &v9fs_cache_inode_index_def,
+ vcookie);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get cookie %p", inode,
+ vcookie->fscache);
+}
+
+void v9fs_cache_inode_put_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ if (!vcookie->fscache)
+ return;
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p put cookie %p", inode,
+ vcookie->fscache);
+
+ fscache_relinquish_cookie(vcookie->fscache, 0);
+ vcookie->fscache = NULL;
+}
+
+void v9fs_cache_inode_flush_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ if (!vcookie->fscache)
+ return;
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p flush cookie %p", inode,
+ vcookie->fscache);
+
+ fscache_relinquish_cookie(vcookie->fscache, 1);
+ vcookie->fscache = NULL;
+}
+
+void v9fs_cache_inode_set_cookie(struct inode *inode, struct file *filp)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ struct p9_fid *fid;
+
+ if (!vcookie->fscache)
+ return;
+
+ spin_lock(&vcookie->lock);
+ fid = filp->private_data;
+ if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+ v9fs_cache_inode_flush_cookie(inode);
+ else
+ v9fs_cache_inode_get_cookie(inode);
+
+ spin_unlock(&vcookie->lock);
+}
+
+void v9fs_cache_inode_reset_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ struct v9fs_session_info *v9ses;
+ struct fscache_cookie *old;
+
+ if (!vcookie->fscache)
+ return;
+
+ old = vcookie->fscache;
+
+ spin_lock(&vcookie->lock);
+ fscache_relinquish_cookie(vcookie->fscache, 1);
+
+ v9ses = v9fs_inode2v9ses(inode);
+ vcookie->fscache = fscache_acquire_cookie(v9ses->fscache,
+ &v9fs_cache_inode_index_def,
+ vcookie);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p revalidating cookie old %p new %p",
+ inode, old, vcookie->fscache);
+
+ spin_unlock(&vcookie->lock);
+}
+
+int __v9fs_fscache_release_page(struct page *page, gfp_t gfp)
+{
+ struct inode *inode = page->mapping->host;
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ BUG_ON(!vcookie->fscache);
+
+ if (PageFsCache(page)) {
+ if (fscache_check_page_write(vcookie->fscache, page)) {
+ if (!(gfp & __GFP_WAIT))
+ return 0;
+ fscache_wait_on_page_write(vcookie->fscache, page);
+ }
+
+ fscache_uncache_page(vcookie->fscache, page);
+ ClearPageFsCache(page);
+ }
+
+ return 1;
+}
+
+void __v9fs_fscache_invalidate_page(struct page *page)
+{
+ struct inode *inode = page->mapping->host;
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ BUG_ON(!vcookie->fscache);
+
+ if (PageFsCache(page)) {
+ fscache_wait_on_page_write(vcookie->fscache, page);
+ BUG_ON(!PageLocked(page));
+ fscache_uncache_page(vcookie->fscache, page);
+ ClearPageFsCache(page);
+ }
+}
+
+static void v9fs_vfs_readpage_complete(struct page *page, void *data,
+ int error)
+{
+ if (!error)
+ SetPageUptodate(page);
+
+ unlock_page(page);
+}
+
+/**
+ * __v9fs_readpage_from_fscache - read a page from cache
+ *
+ * Returns 0 if the pages are in cache and a BIO is submitted,
+ * 1 if the pages are not in cache and -error otherwise.
+ */
+
+int __v9fs_readpage_from_fscache(struct inode *inode, struct page *page)
+{
+ int ret;
+ const struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p page %p", inode, page);
+ if (!vcookie->fscache)
+ return -ENOBUFS;
+
+ ret = fscache_read_or_alloc_page(vcookie->fscache,
+ page,
+ v9fs_vfs_readpage_complete,
+ NULL,
+ GFP_KERNEL);
+ switch (ret) {
+ case -ENOBUFS:
+ case -ENODATA:
+ P9_DPRINTK(P9_DEBUG_FSC, "page/inode not in cache %d", ret);
+ return 1;
+ case 0:
+ P9_DPRINTK(P9_DEBUG_FSC, "BIO submitted");
+ return ret;
+ default:
+ P9_DPRINTK(P9_DEBUG_FSC, "ret %d", ret);
+ return ret;
+ }
+}
+
+/**
+ * __v9fs_readpages_from_fscache - read multiple pages from cache
+ *
+ * Returns 0 if the pages are in cache and a BIO is submitted,
+ * 1 if the pages are not in cache and -error otherwise.
+ */
+
+int __v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages)
+{
+ int ret;
+ const struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p pages %u", inode, *nr_pages);
+ if (!vcookie->fscache)
+ return -ENOBUFS;
+
+ ret = fscache_read_or_alloc_pages(vcookie->fscache,
+ mapping, pages, nr_pages,
+ v9fs_vfs_readpage_complete,
+ NULL,
+ mapping_gfp_mask(mapping));
+ switch (ret) {
+ case -ENOBUFS:
+ case -ENODATA:
+ P9_DPRINTK(P9_DEBUG_FSC, "pages/inodes not in cache %d", ret);
+ return 1;
+ case 0:
+ BUG_ON(!list_empty(pages));
+ BUG_ON(*nr_pages != 0);
+ P9_DPRINTK(P9_DEBUG_FSC, "BIO submitted");
+ return ret;
+ default:
+ P9_DPRINTK(P9_DEBUG_FSC, "ret %d", ret);
+ return ret;
+ }
+}
+
+/**
+ * __v9fs_readpage_to_fscache - write a page to the cache
+ *
+ */
+
+void __v9fs_readpage_to_fscache(struct inode *inode, struct page *page)
+{
+ int ret;
+ const struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p page %p", inode, page);
+ ret = fscache_write_page(vcookie->fscache, page, GFP_KERNEL);
+ P9_DPRINTK(P9_DEBUG_FSC, "ret = %d", ret);
+ if (ret != 0)
+ v9fs_uncache_page(inode, page);
+}
--- /dev/null
+/*
+ * V9FS cache definitions.
+ *
+ * Copyright (C) 2009 by Abhishek Kulkarni <adkulkar@umail.iu.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to:
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA 02111-1301 USA
+ *
+ */
+
+#ifndef _9P_CACHE_H
+#ifdef CONFIG_9P_FSCACHE
+#include <linux/fscache.h>
+#include <linux/spinlock.h>
+
+extern struct kmem_cache *vcookie_cache;
+
+struct v9fs_cookie {
+ spinlock_t lock;
+ struct inode inode;
+ struct fscache_cookie *fscache;
+ struct p9_qid *qid;
+};
+
+static inline struct v9fs_cookie *v9fs_inode2cookie(const struct inode *inode)
+{
+ return container_of(inode, struct v9fs_cookie, inode);
+}
+
+extern struct fscache_netfs v9fs_cache_netfs;
+extern const struct fscache_cookie_def v9fs_cache_session_index_def;
+extern const struct fscache_cookie_def v9fs_cache_inode_index_def;
+
+extern void v9fs_cache_session_get_cookie(struct v9fs_session_info *v9ses);
+extern void v9fs_cache_session_put_cookie(struct v9fs_session_info *v9ses);
+
+extern void v9fs_cache_inode_get_cookie(struct inode *inode);
+extern void v9fs_cache_inode_put_cookie(struct inode *inode);
+extern void v9fs_cache_inode_flush_cookie(struct inode *inode);
+extern void v9fs_cache_inode_set_cookie(struct inode *inode, struct file *filp);
+extern void v9fs_cache_inode_reset_cookie(struct inode *inode);
+
+extern int __v9fs_cache_register(void);
+extern void __v9fs_cache_unregister(void);
+
+extern int __v9fs_fscache_release_page(struct page *page, gfp_t gfp);
+extern void __v9fs_fscache_invalidate_page(struct page *page);
+extern int __v9fs_readpage_from_fscache(struct inode *inode,
+ struct page *page);
+extern int __v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages);
+extern void __v9fs_readpage_to_fscache(struct inode *inode, struct page *page);
+
+
+/**
+ * v9fs_cache_register - Register v9fs file system with the cache
+ */
+static inline int v9fs_cache_register(void)
+{
+ return __v9fs_cache_register();
+}
+
+/**
+ * v9fs_cache_unregister - Unregister v9fs from the cache
+ */
+static inline void v9fs_cache_unregister(void)
+{
+ __v9fs_cache_unregister();
+}
+
+static inline int v9fs_fscache_release_page(struct page *page,
+ gfp_t gfp)
+{
+ return __v9fs_fscache_release_page(page, gfp);
+}
+
+static inline void v9fs_fscache_invalidate_page(struct page *page)
+{
+ __v9fs_fscache_invalidate_page(page);
+}
+
+static inline int v9fs_readpage_from_fscache(struct inode *inode,
+ struct page *page)
+{
+ return __v9fs_readpage_from_fscache(inode, page);
+}
+
+static inline int v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages)
+{
+ return __v9fs_readpages_from_fscache(inode, mapping, pages,
+ nr_pages);
+}
+
+static inline void v9fs_readpage_to_fscache(struct inode *inode,
+ struct page *page)
+{
+ if (PageFsCache(page))
+ __v9fs_readpage_to_fscache(inode, page);
+}
+
+static inline void v9fs_uncache_page(struct inode *inode, struct page *page)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ fscache_uncache_page(vcookie->fscache, page);
+ BUG_ON(PageFsCache(page));
+}
+
+static inline void v9fs_vcookie_set_qid(struct inode *inode,
+ struct p9_qid *qid)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ spin_lock(&vcookie->lock);
+ vcookie->qid = qid;
+ spin_unlock(&vcookie->lock);
+}
+
+#else /* CONFIG_9P_FSCACHE */
+
+static inline int v9fs_cache_register(void)
+{
+ return 1;
+}
+
+static inline void v9fs_cache_unregister(void) {}
+
+static inline int v9fs_fscache_release_page(struct page *page,
+ gfp_t gfp) {
+ return 1;
+}
+
+static inline void v9fs_fscache_invalidate_page(struct page *page) {}
+
+static inline int v9fs_readpage_from_fscache(struct inode *inode,
+ struct page *page)
+{
+ return -ENOBUFS;
+}
+
+static inline int v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages)
+{
+ return -ENOBUFS;
+}
+
+static inline void v9fs_readpage_to_fscache(struct inode *inode,
+ struct page *page)
+{}
+
+static inline void v9fs_uncache_page(struct inode *inode, struct page *page)
+{}
+
+static inline void v9fs_vcookie_set_qid(struct inode *inode,
+ struct p9_qid *qid)
+{}
+
+#endif /* CONFIG_9P_FSCACHE */
+#endif /* _9P_CACHE_H */
#include <net/9p/transport.h>
#include "v9fs.h"
#include "v9fs_vfs.h"
+#include "cache.h"
+
+static DEFINE_SPINLOCK(v9fs_sessionlist_lock);
+static LIST_HEAD(v9fs_sessionlist);
/*
- * Option Parsing (code inspired by NFS code)
- * NOTE: each transport will parse its own options
- */
+ * Option Parsing (code inspired by NFS code)
+ * NOTE: each transport will parse its own options
+ */
enum {
/* Options that take integer arguments */
Opt_debug, Opt_dfltuid, Opt_dfltgid, Opt_afid,
/* String options */
- Opt_uname, Opt_remotename, Opt_trans,
+ Opt_uname, Opt_remotename, Opt_trans, Opt_cache, Opt_cachetag,
/* Options that take no arguments */
Opt_nodevmap,
/* Cache options */
- Opt_cache_loose,
+ Opt_cache_loose, Opt_fscache,
/* Access options */
Opt_access,
/* Error token */
{Opt_uname, "uname=%s"},
{Opt_remotename, "aname=%s"},
{Opt_nodevmap, "nodevmap"},
- {Opt_cache_loose, "cache=loose"},
+ {Opt_cache, "cache=%s"},
{Opt_cache_loose, "loose"},
+ {Opt_fscache, "fscache"},
+ {Opt_cachetag, "cachetag=%s"},
{Opt_access, "access=%s"},
{Opt_err, NULL}
};
v9ses->afid = ~0;
v9ses->debug = 0;
v9ses->cache = 0;
+#ifdef CONFIG_9P_FSCACHE
+ v9ses->cachetag = NULL;
+#endif
if (!opts)
return 0;
options = kstrdup(opts, GFP_KERNEL);
- if (!options) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy of option string\n");
- return -ENOMEM;
- }
+ if (!options)
+ goto fail_option_alloc;
while ((p = strsep(&options, ",")) != NULL) {
int token;
case Opt_cache_loose:
v9ses->cache = CACHE_LOOSE;
break;
+ case Opt_fscache:
+ v9ses->cache = CACHE_FSCACHE;
+ break;
+ case Opt_cachetag:
+#ifdef CONFIG_9P_FSCACHE
+ v9ses->cachetag = match_strdup(&args[0]);
+#endif
+ break;
+ case Opt_cache:
+ s = match_strdup(&args[0]);
+ if (!s)
+ goto fail_option_alloc;
+
+ if (strcmp(s, "loose") == 0)
+ v9ses->cache = CACHE_LOOSE;
+ else if (strcmp(s, "fscache") == 0)
+ v9ses->cache = CACHE_FSCACHE;
+ else
+ v9ses->cache = CACHE_NONE;
+ kfree(s);
+ break;
case Opt_access:
s = match_strdup(&args[0]);
- if (!s) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy"
- " of option argument\n");
- ret = -ENOMEM;
- break;
- }
+ if (!s)
+ goto fail_option_alloc;
+
v9ses->flags &= ~V9FS_ACCESS_MASK;
if (strcmp(s, "user") == 0)
v9ses->flags |= V9FS_ACCESS_USER;
}
kfree(options);
return ret;
+
+fail_option_alloc:
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "failed to allocate copy of option argument\n");
+ return -ENOMEM;
}
/**
return ERR_PTR(-ENOMEM);
}
+ spin_lock(&v9fs_sessionlist_lock);
+ list_add(&v9ses->slist, &v9fs_sessionlist);
+ spin_unlock(&v9fs_sessionlist_lock);
+
v9ses->flags = V9FS_EXTENDED | V9FS_ACCESS_USER;
strcpy(v9ses->uname, V9FS_DEFUSER);
strcpy(v9ses->aname, V9FS_DEFANAME);
else
fid->uid = ~0;
+#ifdef CONFIG_9P_FSCACHE
+ /* register the session for caching */
+ v9fs_cache_session_get_cookie(v9ses);
+#endif
+
return fid;
error:
v9ses->clnt = NULL;
}
+#ifdef CONFIG_9P_FSCACHE
+ if (v9ses->fscache) {
+ v9fs_cache_session_put_cookie(v9ses);
+ kfree(v9ses->cachetag);
+ }
+#endif
__putname(v9ses->uname);
__putname(v9ses->aname);
+
+ spin_lock(&v9fs_sessionlist_lock);
+ list_del(&v9ses->slist);
+ spin_unlock(&v9fs_sessionlist_lock);
}
/**
extern int v9fs_error_init(void);
+static struct kobject *v9fs_kobj;
+
+#ifdef CONFIG_9P_FSCACHE
/**
- * v9fs_init - Initialize module
+ * caches_show - list caches associated with a session
+ *
+ * Returns the size of buffer written.
+ */
+
+static ssize_t caches_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ ssize_t n = 0, count = 0, limit = PAGE_SIZE;
+ struct v9fs_session_info *v9ses;
+
+ spin_lock(&v9fs_sessionlist_lock);
+ list_for_each_entry(v9ses, &v9fs_sessionlist, slist) {
+ if (v9ses->cachetag) {
+ n = snprintf(buf, limit, "%s\n", v9ses->cachetag);
+ if (n < 0) {
+ count = n;
+ break;
+ }
+
+ count += n;
+ limit -= n;
+ }
+ }
+
+ spin_unlock(&v9fs_sessionlist_lock);
+ return count;
+}
+
+static struct kobj_attribute v9fs_attr_cache = __ATTR_RO(caches);
+#endif /* CONFIG_9P_FSCACHE */
+
+static struct attribute *v9fs_attrs[] = {
+#ifdef CONFIG_9P_FSCACHE
+ &v9fs_attr_cache.attr,
+#endif
+ NULL,
+};
+
+static struct attribute_group v9fs_attr_group = {
+ .attrs = v9fs_attrs,
+};
+
+/**
+ * v9fs_sysfs_init - Initialize the v9fs sysfs interface
+ *
+ */
+
+static int v9fs_sysfs_init(void)
+{
+ v9fs_kobj = kobject_create_and_add("9p", fs_kobj);
+ if (!v9fs_kobj)
+ return -ENOMEM;
+
+ if (sysfs_create_group(v9fs_kobj, &v9fs_attr_group)) {
+ kobject_put(v9fs_kobj);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * v9fs_sysfs_cleanup - Unregister the v9fs sysfs interface
+ *
+ */
+
+static void v9fs_sysfs_cleanup(void)
+{
+ sysfs_remove_group(v9fs_kobj, &v9fs_attr_group);
+ kobject_put(v9fs_kobj);
+}
+
+/**
+ * init_v9fs - Initialize module
*
*/
static int __init init_v9fs(void)
{
+ int err;
printk(KERN_INFO "Installing v9fs 9p2000 file system support\n");
/* TODO: Setup list of registered trasnport modules */
- return register_filesystem(&v9fs_fs_type);
+ err = register_filesystem(&v9fs_fs_type);
+ if (err < 0) {
+ printk(KERN_ERR "Failed to register filesystem\n");
+ return err;
+ }
+
+ err = v9fs_cache_register();
+ if (err < 0) {
+ printk(KERN_ERR "Failed to register v9fs for caching\n");
+ goto out_fs_unreg;
+ }
+
+ err = v9fs_sysfs_init();
+ if (err < 0) {
+ printk(KERN_ERR "Failed to register with sysfs\n");
+ goto out_sysfs_cleanup;
+ }
+
+ return 0;
+
+out_sysfs_cleanup:
+ v9fs_sysfs_cleanup();
+
+out_fs_unreg:
+ unregister_filesystem(&v9fs_fs_type);
+
+ return err;
}
/**
- * v9fs_init - shutdown module
+ * exit_v9fs - shutdown module
*
*/
static void __exit exit_v9fs(void)
{
+ v9fs_sysfs_cleanup();
+ v9fs_cache_unregister();
unregister_filesystem(&v9fs_fs_type);
}
enum p9_cache_modes {
CACHE_NONE,
CACHE_LOOSE,
+ CACHE_FSCACHE,
};
/**
* @debug: debug level
* @afid: authentication handle
* @cache: cache mode of type &p9_cache_modes
+ * @cachetag: the tag of the cache associated with this session
+ * @fscache: session cookie associated with FS-Cache
* @options: copy of options string given by user
* @uname: string user name to mount hierarchy as
* @aname: mount specifier for remote hierarchy
* @dfltgid: default numeric groupid to mount hierarchy as
* @uid: if %V9FS_ACCESS_SINGLE, the numeric uid which mounted the hierarchy
* @clnt: reference to 9P network client instantiated for this session
- * @debugfs_dir: reference to debugfs_dir which can be used for add'l debug
+ * @slist: reference to list of registered 9p sessions
*
* This structure holds state for each session instance established during
* a sys_mount() .
unsigned short debug;
unsigned int afid;
unsigned int cache;
+#ifdef CONFIG_9P_FSCACHE
+ char *cachetag;
+ struct fscache_cookie *fscache;
+#endif
char *uname; /* user name to mount as */
char *aname; /* name of remote hierarchy being mounted */
unsigned int dfltgid; /* default gid for legacy support */
u32 uid; /* if ACCESS_SINGLE, the uid that has access */
struct p9_client *clnt; /* 9p client */
- struct dentry *debugfs_dir;
+ struct list_head slist; /* list of sessions registered with v9fs */
};
-extern struct dentry *v9fs_debugfs_root;
-
struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
char *);
void v9fs_session_close(struct v9fs_session_info *v9ses);
extern const struct dentry_operations v9fs_dentry_operations;
extern const struct dentry_operations v9fs_cached_dentry_operations;
+#ifdef CONFIG_9P_FSCACHE
+struct inode *v9fs_alloc_inode(struct super_block *sb);
+void v9fs_destroy_inode(struct inode *inode);
+#endif
+
struct inode *v9fs_get_inode(struct super_block *sb, int mode);
+void v9fs_clear_inode(struct inode *inode);
ino_t v9fs_qid2ino(struct p9_qid *qid);
void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
int v9fs_dir_release(struct inode *inode, struct file *filp);
#include "v9fs.h"
#include "v9fs_vfs.h"
+#include "cache.h"
/**
* v9fs_vfs_readpage - read an entire page in from 9P
int retval;
loff_t offset;
char *buffer;
+ struct inode *inode;
+ inode = page->mapping->host;
P9_DPRINTK(P9_DEBUG_VFS, "\n");
+
+ BUG_ON(!PageLocked(page));
+
+ retval = v9fs_readpage_from_fscache(inode, page);
+ if (retval == 0)
+ return retval;
+
buffer = kmap(page);
offset = page_offset(page);
retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset);
- if (retval < 0)
+ if (retval < 0) {
+ v9fs_uncache_page(inode, page);
goto done;
+ }
memset(buffer + retval, 0, PAGE_CACHE_SIZE - retval);
flush_dcache_page(page);
SetPageUptodate(page);
+
+ v9fs_readpage_to_fscache(inode, page);
retval = 0;
done:
return retval;
}
+/**
+ * v9fs_vfs_readpages - read a set of pages from 9P
+ *
+ * @filp: file being read
+ * @mapping: the address space
+ * @pages: list of pages to read
+ * @nr_pages: count of pages to read
+ *
+ */
+
+static int v9fs_vfs_readpages(struct file *filp, struct address_space *mapping,
+ struct list_head *pages, unsigned nr_pages)
+{
+ int ret = 0;
+ struct inode *inode;
+
+ inode = mapping->host;
+ P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p\n", inode, filp);
+
+ ret = v9fs_readpages_from_fscache(inode, mapping, pages, &nr_pages);
+ if (ret == 0)
+ return ret;
+
+ ret = read_cache_pages(mapping, pages, (void *)v9fs_vfs_readpage, filp);
+ P9_DPRINTK(P9_DEBUG_VFS, " = %d\n", ret);
+ return ret;
+}
+
+/**
+ * v9fs_release_page - release the private state associated with a page
+ *
+ * Returns 1 if the page can be released, false otherwise.
+ */
+
+static int v9fs_release_page(struct page *page, gfp_t gfp)
+{
+ if (PagePrivate(page))
+ return 0;
+
+ return v9fs_fscache_release_page(page, gfp);
+}
+
+/**
+ * v9fs_invalidate_page - Invalidate a page completely or partially
+ *
+ * @page: structure to page
+ * @offset: offset in the page
+ */
+
+static void v9fs_invalidate_page(struct page *page, unsigned long offset)
+{
+ if (offset == 0)
+ v9fs_fscache_invalidate_page(page);
+}
+
+/**
+ * v9fs_launder_page - Writeback a dirty page
+ * Since the writes go directly to the server, we simply return a 0
+ * here to indicate success.
+ *
+ * Returns 0 on success.
+ */
+
+static int v9fs_launder_page(struct page *page)
+{
+ return 0;
+}
+
const struct address_space_operations v9fs_addr_operations = {
.readpage = v9fs_vfs_readpage,
+ .readpages = v9fs_vfs_readpages,
+ .releasepage = v9fs_release_page,
+ .invalidatepage = v9fs_invalidate_page,
+ .launder_page = v9fs_launder_page,
};
#include <linux/string.h>
#include <linux/inet.h>
#include <linux/list.h>
+#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <linux/idr.h>
#include <net/9p/9p.h>
#include "v9fs.h"
#include "v9fs_vfs.h"
#include "fid.h"
+#include "cache.h"
static const struct file_operations v9fs_cached_file_operations;
return err;
}
if (omode & P9_OTRUNC) {
- inode->i_size = 0;
+ i_size_write(inode, 0);
inode->i_blocks = 0;
}
if ((file->f_flags & O_APPEND) && (!v9fs_extended(v9ses)))
/* enable cached file options */
if(file->f_op == &v9fs_file_operations)
file->f_op = &v9fs_cached_file_operations;
+
+#ifdef CONFIG_9P_FSCACHE
+ v9fs_cache_inode_set_cookie(inode, file);
+#endif
}
return 0;
struct p9_client *clnt;
struct inode *inode = filp->f_path.dentry->d_inode;
int origin = *offset;
+ unsigned long pg_start, pg_end;
P9_DPRINTK(P9_DEBUG_VFS, "data %p count %d offset %x\n", data,
(int)count, (int)*offset);
if (count < rsize)
rsize = count;
- n = p9_client_write(fid, NULL, data+total, *offset+total,
+ n = p9_client_write(fid, NULL, data+total, origin+total,
rsize);
if (n <= 0)
break;
} while (count > 0);
if (total > 0) {
- invalidate_inode_pages2_range(inode->i_mapping, origin,
- origin+total);
+ pg_start = origin >> PAGE_CACHE_SHIFT;
+ pg_end = (origin + total - 1) >> PAGE_CACHE_SHIFT;
+ if (inode->i_mapping && inode->i_mapping->nrpages)
+ invalidate_inode_pages2_range(inode->i_mapping,
+ pg_start, pg_end);
*offset += total;
- }
-
- if (*offset > inode->i_size) {
- inode->i_size = *offset;
- inode->i_blocks = (inode->i_size + 512 - 1) >> 9;
+ i_size_write(inode, i_size_read(inode) + total);
+ inode->i_blocks = (i_size_read(inode) + 512 - 1) >> 9;
}
if (n < 0)
#include "v9fs.h"
#include "v9fs_vfs.h"
#include "fid.h"
+#include "cache.h"
static const struct inode_operations v9fs_dir_inode_operations;
static const struct inode_operations v9fs_dir_inode_operations_ext;
wstat->extension = NULL;
}
+#ifdef CONFIG_9P_FSCACHE
+/**
+ * v9fs_alloc_inode - helper function to allocate an inode
+ * This callback is executed before setting up the inode so that we
+ * can associate a vcookie with each inode.
+ *
+ */
+
+struct inode *v9fs_alloc_inode(struct super_block *sb)
+{
+ struct v9fs_cookie *vcookie;
+ vcookie = (struct v9fs_cookie *)kmem_cache_alloc(vcookie_cache,
+ GFP_KERNEL);
+ if (!vcookie)
+ return NULL;
+
+ vcookie->fscache = NULL;
+ vcookie->qid = NULL;
+ spin_lock_init(&vcookie->lock);
+ return &vcookie->inode;
+}
+
+/**
+ * v9fs_destroy_inode - destroy an inode
+ *
+ */
+
+void v9fs_destroy_inode(struct inode *inode)
+{
+ kmem_cache_free(vcookie_cache, v9fs_inode2cookie(inode));
+}
+#endif
+
/**
* v9fs_get_inode - helper function to setup an inode
* @sb: superblock
}
*/
+
+/**
+ * v9fs_clear_inode - release an inode
+ * @inode: inode to release
+ *
+ */
+void v9fs_clear_inode(struct inode *inode)
+{
+ filemap_fdatawrite(inode->i_mapping);
+
+#ifdef CONFIG_9P_FSCACHE
+ v9fs_cache_inode_put_cookie(inode);
+#endif
+}
+
/**
* v9fs_inode_from_fid - populate an inode by issuing a attribute request
* @v9ses: session information
v9fs_stat2inode(st, ret, sb);
ret->i_ino = v9fs_qid2ino(&st->qid);
+
+#ifdef CONFIG_9P_FSCACHE
+ v9fs_vcookie_set_qid(ret, &st->qid);
+ v9fs_cache_inode_get_cookie(ret);
+#endif
p9stat_free(st);
kfree(st);
+
return ret;
error:
P9_DPRINTK(P9_DEBUG_VFS, "dentry: %p\n", dentry);
err = -EPERM;
v9ses = v9fs_inode2v9ses(dentry->d_inode);
- if (v9ses->cache == CACHE_LOOSE)
+ if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
return simple_getattr(mnt, dentry, stat);
fid = v9fs_fid_lookup(dentry);
} else
inode->i_rdev = 0;
- inode->i_size = stat->length;
+ i_size_write(inode, stat->length);
/* not real number of blocks, but 512 byte ones ... */
- inode->i_blocks = (inode->i_size + 512 - 1) >> 9;
+ inode->i_blocks = (i_size_read(inode) + 512 - 1) >> 9;
}
/**
#include "v9fs_vfs.h"
#include "fid.h"
-static void v9fs_clear_inode(struct inode *);
static const struct super_operations v9fs_super_ops;
-/**
- * v9fs_clear_inode - release an inode
- * @inode: inode to release
- *
- */
-
-static void v9fs_clear_inode(struct inode *inode)
-{
- filemap_fdatawrite(inode->i_mapping);
-}
-
/**
* v9fs_set_super - set the superblock
* @s: super block
}
static const struct super_operations v9fs_super_ops = {
+#ifdef CONFIG_9P_FSCACHE
+ .alloc_inode = v9fs_alloc_inode,
+ .destroy_inode = v9fs_destroy_inode,
+#endif
.statfs = simple_statfs,
.clear_inode = v9fs_clear_inode,
.show_options = generic_show_options,
adfs_get_block(struct inode *inode, sector_t block, struct buffer_head *bh,
int create)
{
- if (block < 0)
- goto abort_negative;
-
if (!create) {
if (block >= inode->i_blocks)
goto abort_toobig;
/* don't support allocation of blocks yet */
return -EIO;
-abort_negative:
- adfs_error(inode->i_sb, "block %d < 0", block);
- return -EIO;
-
abort_toobig:
return 0;
}
/* Taken over from the old code... */
/* POSIX UID/GID verification for setting inode attributes. */
-int inode_change_ok(struct inode *inode, struct iattr *attr)
+int inode_change_ok(const struct inode *inode, struct iattr *attr)
{
int retval = -EPERM;
unsigned int ia_valid = attr->ia_valid;
error:
return retval;
}
-
EXPORT_SYMBOL(inode_change_ok);
+/**
+ * inode_newsize_ok - may this inode be truncated to a given size
+ * @inode: the inode to be truncated
+ * @offset: the new size to assign to the inode
+ * @Returns: 0 on success, -ve errno on failure
+ *
+ * inode_newsize_ok will check filesystem limits and ulimits to check that the
+ * new inode size is within limits. inode_newsize_ok will also send SIGXFSZ
+ * when necessary. Caller must not proceed with inode size change if failure is
+ * returned. @inode must be a file (not directory), with appropriate
+ * permissions to allow truncate (inode_newsize_ok does NOT check these
+ * conditions).
+ *
+ * inode_newsize_ok must be called with i_mutex held.
+ */
+int inode_newsize_ok(const struct inode *inode, loff_t offset)
+{
+ if (inode->i_size < offset) {
+ unsigned long limit;
+
+ limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
+ if (limit != RLIM_INFINITY && offset > limit)
+ goto out_sig;
+ if (offset > inode->i_sb->s_maxbytes)
+ goto out_big;
+ } else {
+ /*
+ * truncation of in-use swapfiles is disallowed - it would
+ * cause subsequent swapout to scribble on the now-freed
+ * blocks.
+ */
+ if (IS_SWAPFILE(inode))
+ return -ETXTBSY;
+ }
+
+ return 0;
+out_sig:
+ send_sig(SIGXFSZ, current, 0);
+out_big:
+ return -EFBIG;
+}
+EXPORT_SYMBOL(inode_newsize_ok);
+
int inode_setattr(struct inode * inode, struct iattr * attr)
{
unsigned int ia_valid = attr->ia_valid;
{
kfree(BEFS_SB(sb)->mount_opts.iocharset);
BEFS_SB(sb)->mount_opts.iocharset = NULL;
-
- if (BEFS_SB(sb)->nls) {
- unload_nls(BEFS_SB(sb)->nls);
- BEFS_SB(sb)->nls = NULL;
- }
-
+ unload_nls(BEFS_SB(sb)->nls);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
int numnote;
};
-static int fill_note_info(struct elfhdr *elf, int phdrs,
- struct elf_note_info *info,
- long signr, struct pt_regs *regs)
+static int elf_note_info_init(struct elf_note_info *info)
{
-#define NUM_NOTES 6
- struct list_head *t;
-
- info->notes = NULL;
- info->prstatus = NULL;
- info->psinfo = NULL;
- info->fpu = NULL;
-#ifdef ELF_CORE_COPY_XFPREGS
- info->xfpu = NULL;
-#endif
+ memset(info, 0, sizeof(*info));
INIT_LIST_HEAD(&info->thread_list);
- info->notes = kmalloc(NUM_NOTES * sizeof(struct memelfnote),
- GFP_KERNEL);
+ /* Allocate space for six ELF notes */
+ info->notes = kmalloc(6 * sizeof(struct memelfnote), GFP_KERNEL);
if (!info->notes)
return 0;
info->psinfo = kmalloc(sizeof(*info->psinfo), GFP_KERNEL);
if (!info->psinfo)
- return 0;
+ goto notes_free;
info->prstatus = kmalloc(sizeof(*info->prstatus), GFP_KERNEL);
if (!info->prstatus)
- return 0;
+ goto psinfo_free;
info->fpu = kmalloc(sizeof(*info->fpu), GFP_KERNEL);
if (!info->fpu)
- return 0;
+ goto prstatus_free;
#ifdef ELF_CORE_COPY_XFPREGS
info->xfpu = kmalloc(sizeof(*info->xfpu), GFP_KERNEL);
if (!info->xfpu)
- return 0;
+ goto fpu_free;
+#endif
+ return 1;
+#ifdef ELF_CORE_COPY_XFPREGS
+ fpu_free:
+ kfree(info->fpu);
#endif
+ prstatus_free:
+ kfree(info->prstatus);
+ psinfo_free:
+ kfree(info->psinfo);
+ notes_free:
+ kfree(info->notes);
+ return 0;
+}
+
+static int fill_note_info(struct elfhdr *elf, int phdrs,
+ struct elf_note_info *info,
+ long signr, struct pt_regs *regs)
+{
+ struct list_head *t;
+
+ if (!elf_note_info_init(info))
+ return 0;
- info->thread_status_size = 0;
if (signr) {
struct core_thread *ct;
struct elf_thread_status *ets;
#endif
return 1;
-
-#undef NUM_NOTES
}
static size_t get_note_info_size(struct elf_note_info *info)
}
stack_size = exec_params.stack_size;
- if (stack_size < interp_params.stack_size)
- stack_size = interp_params.stack_size;
-
if (exec_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (exec_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
- else if (interp_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
- executable_stack = EXSTACK_ENABLE_X;
- else if (interp_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
- executable_stack = EXSTACK_DISABLE_X;
else
executable_stack = EXSTACK_DEFAULT;
+ if (stack_size == 0) {
+ stack_size = interp_params.stack_size;
+ if (interp_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
+ executable_stack = EXSTACK_ENABLE_X;
+ else if (interp_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
+ executable_stack = EXSTACK_DISABLE_X;
+ else
+ executable_stack = EXSTACK_DEFAULT;
+ }
+
retval = -ENOEXEC;
if (stack_size == 0)
goto error;
ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos);
if (ret <= 0)
break;
- if (ret >= (unsigned long) -4096)
- break;
len -= ret;
strm.next_in = buf;
"(%d != %d)", (unsigned) r, curid, id);
goto failed;
} else if ( ! p->lib_list[id].loaded &&
- load_flat_shared_library(id, p) > (unsigned long) -4096) {
+ IS_ERR_VALUE(load_flat_shared_library(id, p))) {
printk("BINFMT_FLAT: failed to load library %d", id);
goto failed;
}
textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_EXECUTABLE, 0);
up_write(¤t->mm->mmap_sem);
- if (!textpos || textpos >= (unsigned long) -4096) {
+ if (!textpos || IS_ERR_VALUE(textpos)) {
if (!textpos)
textpos = (unsigned long) -ENOMEM;
printk("Unable to mmap process text, errno %d\n", (int)-textpos);
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
- if (realdatastart == 0 || realdatastart >= (unsigned long)-4096) {
+ if (realdatastart == 0 || IS_ERR_VALUE(realdatastart)) {
if (!realdatastart)
realdatastart = (unsigned long) -ENOMEM;
printk("Unable to allocate RAM for process data, errno %d\n",
result = bprm->file->f_op->read(bprm->file, (char *) datapos,
data_len + (relocs * sizeof(unsigned long)), &fpos);
}
- if (result >= (unsigned long)-4096) {
+ if (IS_ERR_VALUE(result)) {
printk("Unable to read data+bss, errno %d\n", (int)-result);
do_munmap(current->mm, textpos, text_len);
do_munmap(current->mm, realdatastart, data_len + extra);
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
- if (!textpos || textpos >= (unsigned long) -4096) {
+ if (!textpos || IS_ERR_VALUE(textpos)) {
if (!textpos)
textpos = (unsigned long) -ENOMEM;
printk("Unable to allocate RAM for process text/data, errno %d\n",
fpos = 0;
result = bprm->file->f_op->read(bprm->file,
(char *) textpos, text_len, &fpos);
- if (result < (unsigned long) -4096)
+ if (!IS_ERR_VALUE(result))
result = decompress_exec(bprm, text_len, (char *) datapos,
data_len + (relocs * sizeof(unsigned long)), 0);
}
fpos = 0;
result = bprm->file->f_op->read(bprm->file,
(char *) textpos, text_len, &fpos);
- if (result < (unsigned long) -4096) {
+ if (!IS_ERR_VALUE(result)) {
fpos = ntohl(hdr->data_start);
result = bprm->file->f_op->read(bprm->file, (char *) datapos,
data_len + (relocs * sizeof(unsigned long)), &fpos);
}
}
- if (result >= (unsigned long)-4096) {
+ if (IS_ERR_VALUE(result)) {
printk("Unable to read code+data+bss, errno %d\n",(int)-result);
do_munmap(current->mm, textpos, text_len + data_len + extra +
MAX_SHARED_LIBS * sizeof(unsigned long));
res = prepare_binprm(&bprm);
- if (res <= (unsigned long)-4096)
+ if (!IS_ERR_VALUE(res))
res = load_flat_file(&bprm, libs, id, NULL);
abort_creds(bprm.cred);
stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
- if (res > (unsigned long)-4096)
+ if (IS_ERR_VALUE(res))
return res;
/* Update data segment pointers for all libraries */
* freeze_bdev -- lock a filesystem and force it into a consistent state
* @bdev: blockdevice to lock
*
- * This takes the block device bd_mount_sem to make sure no new mounts
- * happen on bdev until thaw_bdev() is called.
* If a superblock is found on this device, we take the s_umount semaphore
* on it to make sure nobody unmounts until the snapshot creation is done.
* The reference counter (bd_fsfreeze_count) guarantees that only the last
int error = 0;
mutex_lock(&bdev->bd_fsfreeze_mutex);
- if (bdev->bd_fsfreeze_count > 0) {
- bdev->bd_fsfreeze_count++;
+ if (++bdev->bd_fsfreeze_count > 1) {
+ /*
+ * We don't even need to grab a reference - the first call
+ * to freeze_bdev grab an active reference and only the last
+ * thaw_bdev drops it.
+ */
sb = get_super(bdev);
+ drop_super(sb);
mutex_unlock(&bdev->bd_fsfreeze_mutex);
return sb;
}
- bdev->bd_fsfreeze_count++;
-
- down(&bdev->bd_mount_sem);
- sb = get_super(bdev);
- if (sb && !(sb->s_flags & MS_RDONLY)) {
- sb->s_frozen = SB_FREEZE_WRITE;
- smp_wmb();
-
- sync_filesystem(sb);
-
- sb->s_frozen = SB_FREEZE_TRANS;
- smp_wmb();
-
- sync_blockdev(sb->s_bdev);
-
- if (sb->s_op->freeze_fs) {
- error = sb->s_op->freeze_fs(sb);
- if (error) {
- printk(KERN_ERR
- "VFS:Filesystem freeze failed\n");
- sb->s_frozen = SB_UNFROZEN;
- drop_super(sb);
- up(&bdev->bd_mount_sem);
- bdev->bd_fsfreeze_count--;
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return ERR_PTR(error);
- }
+
+ sb = get_active_super(bdev);
+ if (!sb)
+ goto out;
+ if (sb->s_flags & MS_RDONLY) {
+ deactivate_locked_super(sb);
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ return sb;
+ }
+
+ sb->s_frozen = SB_FREEZE_WRITE;
+ smp_wmb();
+
+ sync_filesystem(sb);
+
+ sb->s_frozen = SB_FREEZE_TRANS;
+ smp_wmb();
+
+ sync_blockdev(sb->s_bdev);
+
+ if (sb->s_op->freeze_fs) {
+ error = sb->s_op->freeze_fs(sb);
+ if (error) {
+ printk(KERN_ERR
+ "VFS:Filesystem freeze failed\n");
+ sb->s_frozen = SB_UNFROZEN;
+ deactivate_locked_super(sb);
+ bdev->bd_fsfreeze_count--;
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ return ERR_PTR(error);
}
}
+ up_write(&sb->s_umount);
+ out:
sync_blockdev(bdev);
mutex_unlock(&bdev->bd_fsfreeze_mutex);
-
- return sb; /* thaw_bdev releases s->s_umount and bd_mount_sem */
+ return sb; /* thaw_bdev releases s->s_umount */
}
EXPORT_SYMBOL(freeze_bdev);
*/
int thaw_bdev(struct block_device *bdev, struct super_block *sb)
{
- int error = 0;
+ int error = -EINVAL;
mutex_lock(&bdev->bd_fsfreeze_mutex);
- if (!bdev->bd_fsfreeze_count) {
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return -EINVAL;
- }
-
- bdev->bd_fsfreeze_count--;
- if (bdev->bd_fsfreeze_count > 0) {
- if (sb)
- drop_super(sb);
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return 0;
- }
-
- if (sb) {
- BUG_ON(sb->s_bdev != bdev);
- if (!(sb->s_flags & MS_RDONLY)) {
- if (sb->s_op->unfreeze_fs) {
- error = sb->s_op->unfreeze_fs(sb);
- if (error) {
- printk(KERN_ERR
- "VFS:Filesystem thaw failed\n");
- sb->s_frozen = SB_FREEZE_TRANS;
- bdev->bd_fsfreeze_count++;
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return error;
- }
- }
- sb->s_frozen = SB_UNFROZEN;
- smp_wmb();
- wake_up(&sb->s_wait_unfrozen);
+ if (!bdev->bd_fsfreeze_count)
+ goto out_unlock;
+
+ error = 0;
+ if (--bdev->bd_fsfreeze_count > 0)
+ goto out_unlock;
+
+ if (!sb)
+ goto out_unlock;
+
+ BUG_ON(sb->s_bdev != bdev);
+ down_write(&sb->s_umount);
+ if (sb->s_flags & MS_RDONLY)
+ goto out_deactivate;
+
+ if (sb->s_op->unfreeze_fs) {
+ error = sb->s_op->unfreeze_fs(sb);
+ if (error) {
+ printk(KERN_ERR
+ "VFS:Filesystem thaw failed\n");
+ sb->s_frozen = SB_FREEZE_TRANS;
+ bdev->bd_fsfreeze_count++;
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ return error;
}
- drop_super(sb);
}
- up(&bdev->bd_mount_sem);
+ sb->s_frozen = SB_UNFROZEN;
+ smp_wmb();
+ wake_up(&sb->s_wait_unfrozen);
+
+out_deactivate:
+ if (sb)
+ deactivate_locked_super(sb);
+out_unlock:
mutex_unlock(&bdev->bd_fsfreeze_mutex);
return 0;
}
memset(bdev, 0, sizeof(*bdev));
mutex_init(&bdev->bd_mutex);
- sema_init(&bdev->bd_mount_sem, 1);
INIT_LIST_HEAD(&bdev->bd_inodes);
INIT_LIST_HEAD(&bdev->bd_list);
#ifdef CONFIG_SYSFS
/* number of things on the pending list */
atomic_t num_pending;
+ /* reference counter for this struct */
+ atomic_t refs;
+
unsigned long sequence;
/* protects the pending list. */
unsigned long flags;
spin_lock_irqsave(&worker->workers->lock, flags);
worker->idle = 1;
- list_move(&worker->worker_list, &worker->workers->idle_list);
+
+ /* the list may be empty if the worker is just starting */
+ if (!list_empty(&worker->worker_list)) {
+ list_move(&worker->worker_list,
+ &worker->workers->idle_list);
+ }
spin_unlock_irqrestore(&worker->workers->lock, flags);
}
}
unsigned long flags;
spin_lock_irqsave(&worker->workers->lock, flags);
worker->idle = 0;
- list_move_tail(&worker->worker_list,
- &worker->workers->worker_list);
+
+ if (!list_empty(&worker->worker_list)) {
+ list_move_tail(&worker->worker_list,
+ &worker->workers->worker_list);
+ }
spin_unlock_irqrestore(&worker->workers->lock, flags);
}
}
-static noinline int run_ordered_completions(struct btrfs_workers *workers,
- struct btrfs_work *work)
+static void check_pending_worker_creates(struct btrfs_worker_thread *worker)
{
+ struct btrfs_workers *workers = worker->workers;
unsigned long flags;
+ rmb();
+ if (!workers->atomic_start_pending)
+ return;
+
+ spin_lock_irqsave(&workers->lock, flags);
+ if (!workers->atomic_start_pending)
+ goto out;
+
+ workers->atomic_start_pending = 0;
+ if (workers->num_workers >= workers->max_workers)
+ goto out;
+
+ spin_unlock_irqrestore(&workers->lock, flags);
+ btrfs_start_workers(workers, 1);
+ return;
+
+out:
+ spin_unlock_irqrestore(&workers->lock, flags);
+}
+
+static noinline int run_ordered_completions(struct btrfs_workers *workers,
+ struct btrfs_work *work)
+{
if (!workers->ordered)
return 0;
set_bit(WORK_DONE_BIT, &work->flags);
- spin_lock_irqsave(&workers->lock, flags);
+ spin_lock(&workers->order_lock);
while (1) {
if (!list_empty(&workers->prio_order_list)) {
if (test_and_set_bit(WORK_ORDER_DONE_BIT, &work->flags))
break;
- spin_unlock_irqrestore(&workers->lock, flags);
+ spin_unlock(&workers->order_lock);
work->ordered_func(work);
/* now take the lock again and call the freeing code */
- spin_lock_irqsave(&workers->lock, flags);
+ spin_lock(&workers->order_lock);
list_del(&work->order_list);
work->ordered_free(work);
}
- spin_unlock_irqrestore(&workers->lock, flags);
+ spin_unlock(&workers->order_lock);
return 0;
}
+static void put_worker(struct btrfs_worker_thread *worker)
+{
+ if (atomic_dec_and_test(&worker->refs))
+ kfree(worker);
+}
+
+static int try_worker_shutdown(struct btrfs_worker_thread *worker)
+{
+ int freeit = 0;
+
+ spin_lock_irq(&worker->lock);
+ spin_lock(&worker->workers->lock);
+ if (worker->workers->num_workers > 1 &&
+ worker->idle &&
+ !worker->working &&
+ !list_empty(&worker->worker_list) &&
+ list_empty(&worker->prio_pending) &&
+ list_empty(&worker->pending) &&
+ atomic_read(&worker->num_pending) == 0) {
+ freeit = 1;
+ list_del_init(&worker->worker_list);
+ worker->workers->num_workers--;
+ }
+ spin_unlock(&worker->workers->lock);
+ spin_unlock_irq(&worker->lock);
+
+ if (freeit)
+ put_worker(worker);
+ return freeit;
+}
+
+static struct btrfs_work *get_next_work(struct btrfs_worker_thread *worker,
+ struct list_head *prio_head,
+ struct list_head *head)
+{
+ struct btrfs_work *work = NULL;
+ struct list_head *cur = NULL;
+
+ if(!list_empty(prio_head))
+ cur = prio_head->next;
+
+ smp_mb();
+ if (!list_empty(&worker->prio_pending))
+ goto refill;
+
+ if (!list_empty(head))
+ cur = head->next;
+
+ if (cur)
+ goto out;
+
+refill:
+ spin_lock_irq(&worker->lock);
+ list_splice_tail_init(&worker->prio_pending, prio_head);
+ list_splice_tail_init(&worker->pending, head);
+
+ if (!list_empty(prio_head))
+ cur = prio_head->next;
+ else if (!list_empty(head))
+ cur = head->next;
+ spin_unlock_irq(&worker->lock);
+
+ if (!cur)
+ goto out_fail;
+
+out:
+ work = list_entry(cur, struct btrfs_work, list);
+
+out_fail:
+ return work;
+}
+
/*
* main loop for servicing work items
*/
static int worker_loop(void *arg)
{
struct btrfs_worker_thread *worker = arg;
- struct list_head *cur;
+ struct list_head head;
+ struct list_head prio_head;
struct btrfs_work *work;
+
+ INIT_LIST_HEAD(&head);
+ INIT_LIST_HEAD(&prio_head);
+
do {
- spin_lock_irq(&worker->lock);
-again_locked:
+again:
while (1) {
- if (!list_empty(&worker->prio_pending))
- cur = worker->prio_pending.next;
- else if (!list_empty(&worker->pending))
- cur = worker->pending.next;
- else
+
+
+ work = get_next_work(worker, &prio_head, &head);
+ if (!work)
break;
- work = list_entry(cur, struct btrfs_work, list);
list_del(&work->list);
clear_bit(WORK_QUEUED_BIT, &work->flags);
work->worker = worker;
- spin_unlock_irq(&worker->lock);
work->func(work);
*/
run_ordered_completions(worker->workers, work);
- spin_lock_irq(&worker->lock);
- check_idle_worker(worker);
+ check_pending_worker_creates(worker);
+
}
+
+ spin_lock_irq(&worker->lock);
+ check_idle_worker(worker);
+
if (freezing(current)) {
worker->working = 0;
spin_unlock_irq(&worker->lock);
spin_lock_irq(&worker->lock);
set_current_state(TASK_INTERRUPTIBLE);
if (!list_empty(&worker->pending) ||
- !list_empty(&worker->prio_pending))
- goto again_locked;
+ !list_empty(&worker->prio_pending)) {
+ spin_unlock_irq(&worker->lock);
+ goto again;
+ }
/*
* this makes sure we get a wakeup when someone
worker->working = 0;
spin_unlock_irq(&worker->lock);
- if (!kthread_should_stop())
- schedule();
+ if (!kthread_should_stop()) {
+ schedule_timeout(HZ * 120);
+ if (!worker->working &&
+ try_worker_shutdown(worker)) {
+ return 0;
+ }
+ }
}
__set_current_state(TASK_RUNNING);
}
{
struct list_head *cur;
struct btrfs_worker_thread *worker;
+ int can_stop;
+ spin_lock_irq(&workers->lock);
list_splice_init(&workers->idle_list, &workers->worker_list);
while (!list_empty(&workers->worker_list)) {
cur = workers->worker_list.next;
worker = list_entry(cur, struct btrfs_worker_thread,
worker_list);
- kthread_stop(worker->task);
- list_del(&worker->worker_list);
- kfree(worker);
+
+ atomic_inc(&worker->refs);
+ workers->num_workers -= 1;
+ if (!list_empty(&worker->worker_list)) {
+ list_del_init(&worker->worker_list);
+ put_worker(worker);
+ can_stop = 1;
+ } else
+ can_stop = 0;
+ spin_unlock_irq(&workers->lock);
+ if (can_stop)
+ kthread_stop(worker->task);
+ spin_lock_irq(&workers->lock);
+ put_worker(worker);
}
+ spin_unlock_irq(&workers->lock);
return 0;
}
INIT_LIST_HEAD(&workers->order_list);
INIT_LIST_HEAD(&workers->prio_order_list);
spin_lock_init(&workers->lock);
+ spin_lock_init(&workers->order_lock);
workers->max_workers = max;
workers->idle_thresh = 32;
workers->name = name;
workers->ordered = 0;
+ workers->atomic_start_pending = 0;
+ workers->atomic_worker_start = 0;
}
/*
INIT_LIST_HEAD(&worker->prio_pending);
INIT_LIST_HEAD(&worker->worker_list);
spin_lock_init(&worker->lock);
+
atomic_set(&worker->num_pending, 0);
+ atomic_set(&worker->refs, 1);
worker->workers = workers;
worker->task = kthread_run(worker_loop, worker,
"btrfs-%s-%d", workers->name,
kfree(worker);
goto fail;
}
-
spin_lock_irq(&workers->lock);
list_add_tail(&worker->worker_list, &workers->idle_list);
worker->idle = 1;
*/
next = workers->worker_list.next;
worker = list_entry(next, struct btrfs_worker_thread, worker_list);
- atomic_inc(&worker->num_pending);
worker->sequence++;
if (worker->sequence % workers->idle_thresh == 0)
{
struct btrfs_worker_thread *worker;
unsigned long flags;
+ struct list_head *fallback;
again:
spin_lock_irqsave(&workers->lock, flags);
worker = next_worker(workers);
- spin_unlock_irqrestore(&workers->lock, flags);
if (!worker) {
- spin_lock_irqsave(&workers->lock, flags);
if (workers->num_workers >= workers->max_workers) {
- struct list_head *fallback = NULL;
- /*
- * we have failed to find any workers, just
- * return the force one
- */
- if (!list_empty(&workers->worker_list))
- fallback = workers->worker_list.next;
- if (!list_empty(&workers->idle_list))
- fallback = workers->idle_list.next;
- BUG_ON(!fallback);
- worker = list_entry(fallback,
- struct btrfs_worker_thread, worker_list);
- spin_unlock_irqrestore(&workers->lock, flags);
+ goto fallback;
+ } else if (workers->atomic_worker_start) {
+ workers->atomic_start_pending = 1;
+ goto fallback;
} else {
spin_unlock_irqrestore(&workers->lock, flags);
/* we're below the limit, start another worker */
goto again;
}
}
+ goto found;
+
+fallback:
+ fallback = NULL;
+ /*
+ * we have failed to find any workers, just
+ * return the first one we can find.
+ */
+ if (!list_empty(&workers->worker_list))
+ fallback = workers->worker_list.next;
+ if (!list_empty(&workers->idle_list))
+ fallback = workers->idle_list.next;
+ BUG_ON(!fallback);
+ worker = list_entry(fallback,
+ struct btrfs_worker_thread, worker_list);
+found:
+ /*
+ * this makes sure the worker doesn't exit before it is placed
+ * onto a busy/idle list
+ */
+ atomic_inc(&worker->num_pending);
+ spin_unlock_irqrestore(&workers->lock, flags);
return worker;
}
spin_lock(&worker->workers->lock);
worker->idle = 0;
list_move_tail(&worker->worker_list,
- &worker->workers->worker_list);
+ &worker->workers->worker_list);
spin_unlock(&worker->workers->lock);
}
if (!worker->working) {
worker->working = 1;
}
- spin_unlock_irqrestore(&worker->lock, flags);
if (wake)
wake_up_process(worker->task);
+ spin_unlock_irqrestore(&worker->lock, flags);
out:
return 0;
worker = find_worker(workers);
if (workers->ordered) {
- spin_lock_irqsave(&workers->lock, flags);
+ /*
+ * you're not allowed to do ordered queues from an
+ * interrupt handler
+ */
+ spin_lock(&workers->order_lock);
if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) {
list_add_tail(&work->order_list,
&workers->prio_order_list);
} else {
list_add_tail(&work->order_list, &workers->order_list);
}
- spin_unlock_irqrestore(&workers->lock, flags);
+ spin_unlock(&workers->order_lock);
} else {
INIT_LIST_HEAD(&work->order_list);
}
list_add_tail(&work->list, &worker->prio_pending);
else
list_add_tail(&work->list, &worker->pending);
- atomic_inc(&worker->num_pending);
check_busy_worker(worker);
/*
wake = 1;
worker->working = 1;
- spin_unlock_irqrestore(&worker->lock, flags);
-
if (wake)
wake_up_process(worker->task);
+ spin_unlock_irqrestore(&worker->lock, flags);
+
out:
return 0;
}
/* force completions in the order they were queued */
int ordered;
+ /* more workers required, but in an interrupt handler */
+ int atomic_start_pending;
+
+ /*
+ * are we allowed to sleep while starting workers or are we required
+ * to start them at a later time?
+ */
+ int atomic_worker_start;
+
/* list with all the work threads. The workers on the idle thread
* may be actively servicing jobs, but they haven't yet hit the
* idle thresh limit above.
/* lock for finding the next worker thread to queue on */
spinlock_t lock;
+ /* lock for the ordered lists */
+ spinlock_t order_lock;
+
/* extra name for this worker, used for current->name */
char *name;
};
* of these.
*/
unsigned ordered_data_close:1;
+ unsigned dummy_inode:1;
struct inode vfs_inode;
};
*/
set_page_extent_mapped(page);
lock_extent(tree, last_offset, end, GFP_NOFS);
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, last_offset,
PAGE_CACHE_SIZE);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em || last_offset < em->start ||
(last_offset + PAGE_CACHE_SIZE > extent_map_end(em)) ||
em_tree = &BTRFS_I(inode)->extent_tree;
/* we need the actual starting offset of this extent in the file */
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree,
page_offset(bio->bi_io_vec->bv_page),
PAGE_CACHE_SIZE);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
compressed_len = em->block_len;
cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS);
int split;
int num_doubles = 0;
+ l = path->nodes[0];
+ slot = path->slots[0];
+ if (extend && data_size + btrfs_item_size_nr(l, slot) +
+ sizeof(struct btrfs_item) > BTRFS_LEAF_DATA_SIZE(root))
+ return -EOVERFLOW;
+
/* first try to make some room by pushing left and right */
if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
wret = push_leaf_right(trans, root, path, data_size, 0);
*/
#define BTRFS_DEV_ITEMS_OBJECTID 1ULL
+#define BTRFS_BTREE_INODE_OBJECTID 1
+
+#define BTRFS_EMPTY_SUBVOL_DIR_OBJECTID 2
+
/*
* we can actually store much bigger names, but lets not confuse the rest
* of linux
u64 bytes_reserved; /* total bytes the allocator has reserved for
current allocations */
u64 bytes_readonly; /* total bytes that are read only */
+ u64 bytes_super; /* total bytes reserved for the super blocks */
/* delalloc accounting */
u64 bytes_delalloc; /* number of bytes reserved for allocation,
BTRFS_CACHE_FINISHED = 2,
};
+struct btrfs_caching_control {
+ struct list_head list;
+ struct mutex mutex;
+ wait_queue_head_t wait;
+ struct btrfs_block_group_cache *block_group;
+ u64 progress;
+ atomic_t count;
+};
+
struct btrfs_block_group_cache {
struct btrfs_key key;
struct btrfs_block_group_item item;
spinlock_t lock;
u64 pinned;
u64 reserved;
+ u64 bytes_super;
u64 flags;
u64 sectorsize;
int extents_thresh;
int dirty;
/* cache tracking stuff */
- wait_queue_head_t caching_q;
int cached;
+ struct btrfs_caching_control *caching_ctl;
+ u64 last_byte_to_unpin;
struct btrfs_space_info *space_info;
/* the log root tree is a directory of all the other log roots */
struct btrfs_root *log_root_tree;
+
+ spinlock_t fs_roots_radix_lock;
struct radix_tree_root fs_roots_radix;
/* block group cache stuff */
spinlock_t block_group_cache_lock;
struct rb_root block_group_cache_tree;
- struct extent_io_tree pinned_extents;
+ struct extent_io_tree freed_extents[2];
+ struct extent_io_tree *pinned_extents;
/* logical->physical extent mapping */
struct btrfs_mapping_tree mapping_tree;
struct mutex transaction_kthread_mutex;
struct mutex cleaner_mutex;
struct mutex chunk_mutex;
- struct mutex drop_mutex;
struct mutex volume_mutex;
- struct mutex tree_reloc_mutex;
- struct rw_semaphore extent_commit_sem;
-
/*
* this protects the ordered operations list only while we are
* processing all of the entries on it. This way we make
* before jumping into the main commit.
*/
struct mutex ordered_operations_mutex;
+ struct rw_semaphore extent_commit_sem;
+
+ struct rw_semaphore subvol_sem;
+
+ struct srcu_struct subvol_srcu;
struct list_head trans_list;
struct list_head hashers;
struct list_head dead_roots;
+ struct list_head caching_block_groups;
atomic_t nr_async_submits;
atomic_t async_submit_draining;
u32 stripesize;
u32 type;
- u64 highest_inode;
- u64 last_inode_alloc;
+
+ u64 highest_objectid;
int ref_cows;
int track_dirty;
+ int in_radix;
+
u64 defrag_trans_start;
struct btrfs_key defrag_progress;
struct btrfs_key defrag_max;
int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans,
struct btrfs_root *root, unsigned long count);
int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len);
-int btrfs_update_pinned_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int pin);
+int btrfs_pin_extent(struct btrfs_root *root,
+ u64 bytenr, u64 num, int reserved);
int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct extent_buffer *leaf);
int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
u64 root_objectid, u64 owner, u64 offset);
int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len);
+int btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root);
int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct extent_io_tree *unpin);
+ struct btrfs_root *root);
int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr);
int btrfs_free_block_groups(struct btrfs_fs_info *info);
int btrfs_read_block_groups(struct btrfs_root *root);
+int btrfs_can_relocate(struct btrfs_root *root, u64 bytenr);
int btrfs_make_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 bytes_used,
u64 type, u64 chunk_objectid, u64 chunk_offset,
u64 bytes);
void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
u64 bytes);
-void btrfs_free_pinned_extents(struct btrfs_fs_info *info);
/* ctree.c */
int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
int level, int *slot);
struct extent_buffer *parent);
/* root-item.c */
int btrfs_find_root_ref(struct btrfs_root *tree_root,
- struct btrfs_path *path,
- u64 root_id, u64 ref_id);
+ struct btrfs_path *path,
+ u64 root_id, u64 ref_id);
int btrfs_add_root_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *tree_root,
- u64 root_id, u8 type, u64 ref_id,
- u64 dirid, u64 sequence,
+ u64 root_id, u64 ref_id, u64 dirid, u64 sequence,
+ const char *name, int name_len);
+int btrfs_del_root_ref(struct btrfs_trans_handle *trans,
+ struct btrfs_root *tree_root,
+ u64 root_id, u64 ref_id, u64 dirid, u64 *sequence,
const char *name, int name_len);
int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_key *key);
int btrfs_search_root(struct btrfs_root *root, u64 search_start,
u64 *found_objectid);
int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid);
+int btrfs_find_orphan_roots(struct btrfs_root *tree_root);
int btrfs_set_root_node(struct btrfs_root_item *item,
struct extent_buffer *node);
/* dir-item.c */
struct btrfs_path *path, u64 dir,
u64 objectid, const char *name, int name_len,
int mod);
+struct btrfs_dir_item *
+btrfs_search_dir_index_item(struct btrfs_root *root,
+ struct btrfs_path *path, u64 dirid,
+ const char *name, int name_len);
struct btrfs_dir_item *btrfs_match_dir_item_name(struct btrfs_root *root,
struct btrfs_path *path,
const char *name, int name_len);
struct btrfs_root *root, u64 offset);
int btrfs_del_orphan_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 offset);
+int btrfs_find_orphan_item(struct btrfs_root *root, u64 offset);
/* inode-map.c */
int btrfs_find_free_objectid(struct btrfs_trans_handle *trans,
int btrfs_add_link(struct btrfs_trans_handle *trans,
struct inode *parent_inode, struct inode *inode,
const char *name, int name_len, int add_backref, u64 index);
+int btrfs_unlink_subvol(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct inode *dir, u64 objectid,
+ const char *name, int name_len);
int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode, u64 new_size,
int btrfs_writepages(struct address_space *mapping,
struct writeback_control *wbc);
int btrfs_create_subvol_root(struct btrfs_trans_handle *trans,
- struct btrfs_root *new_root, struct dentry *dentry,
+ struct btrfs_root *new_root,
u64 new_dirid, u64 alloc_hint);
int btrfs_merge_bio_hook(struct page *page, unsigned long offset,
size_t size, struct bio *bio, unsigned long bio_flags);
void btrfs_dirty_inode(struct inode *inode);
struct inode *btrfs_alloc_inode(struct super_block *sb);
void btrfs_destroy_inode(struct inode *inode);
+void btrfs_drop_inode(struct inode *inode);
int btrfs_init_cachep(void);
void btrfs_destroy_cachep(void);
long btrfs_ioctl_trans_end(struct file *file);
int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
void btrfs_orphan_cleanup(struct btrfs_root *root);
int btrfs_cont_expand(struct inode *inode, loff_t size);
+int btrfs_invalidate_inodes(struct btrfs_root *root);
+extern struct dentry_operations btrfs_dentry_operations;
/* ioctl.c */
long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
u64 start, u64 end, u64 locked_end,
- u64 inline_limit, u64 *hint_block);
+ u64 inline_limit, u64 *hint_block, int drop_cache);
int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode, u64 start, u64 end);
return btrfs_match_dir_item_name(root, path, name, name_len);
}
+struct btrfs_dir_item *
+btrfs_search_dir_index_item(struct btrfs_root *root,
+ struct btrfs_path *path, u64 dirid,
+ const char *name, int name_len)
+{
+ struct extent_buffer *leaf;
+ struct btrfs_dir_item *di;
+ struct btrfs_key key;
+ u32 nritems;
+ int ret;
+
+ key.objectid = dirid;
+ key.type = BTRFS_DIR_INDEX_KEY;
+ key.offset = 0;
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ leaf = path->nodes[0];
+ nritems = btrfs_header_nritems(leaf);
+
+ while (1) {
+ if (path->slots[0] >= nritems) {
+ ret = btrfs_next_leaf(root, path);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ if (ret > 0)
+ break;
+ leaf = path->nodes[0];
+ nritems = btrfs_header_nritems(leaf);
+ continue;
+ }
+
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ if (key.objectid != dirid || key.type != BTRFS_DIR_INDEX_KEY)
+ break;
+
+ di = btrfs_match_dir_item_name(root, path, name, name_len);
+ if (di)
+ return di;
+
+ path->slots[0]++;
+ }
+ return NULL;
+}
+
struct btrfs_dir_item *btrfs_lookup_xattr(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, u64 dir,
static struct extent_io_ops btree_extent_io_ops;
static void end_workqueue_fn(struct btrfs_work *work);
+static void free_fs_root(struct btrfs_root *root);
static atomic_t btrfs_bdi_num = ATOMIC_INIT(0);
struct extent_map *em;
int ret;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, len);
if (em) {
em->bdev =
BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev;
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
goto out;
}
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
em = alloc_extent_map(GFP_NOFS);
if (!em) {
em->block_start = 0;
em->bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
if (ret == -EEXIST) {
u64 failed_start = em->start;
free_extent_map(em);
em = NULL;
}
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret)
em = ERR_PTR(ret);
root->fs_info = fs_info;
root->objectid = objectid;
root->last_trans = 0;
- root->highest_inode = 0;
- root->last_inode_alloc = 0;
+ root->highest_objectid = 0;
root->name = NULL;
root->in_sysfs = 0;
root->inode_tree.rb_node = NULL;
root, fs_info, objectid);
ret = btrfs_find_last_root(tree_root, objectid,
&root->root_item, &root->root_key);
+ if (ret > 0)
+ return -ENOENT;
BUG_ON(ret);
generation = btrfs_root_generation(&root->root_item);
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
- root->commit_root = btrfs_root_node(root);
BUG_ON(!root->node);
+ root->commit_root = btrfs_root_node(root);
return 0;
}
struct btrfs_fs_info *fs_info = tree_root->fs_info;
struct btrfs_path *path;
struct extent_buffer *l;
- u64 highest_inode;
u64 generation;
u32 blocksize;
int ret = 0;
kfree(root);
return ERR_PTR(ret);
}
- goto insert;
+ goto out;
}
__setup_root(tree_root->nodesize, tree_root->leafsize,
path = btrfs_alloc_path();
BUG_ON(!path);
ret = btrfs_search_slot(NULL, tree_root, location, path, 0, 0);
- if (ret != 0) {
- if (ret > 0)
- ret = -ENOENT;
- goto out;
+ if (ret == 0) {
+ l = path->nodes[0];
+ read_extent_buffer(l, &root->root_item,
+ btrfs_item_ptr_offset(l, path->slots[0]),
+ sizeof(root->root_item));
+ memcpy(&root->root_key, location, sizeof(*location));
}
- l = path->nodes[0];
- read_extent_buffer(l, &root->root_item,
- btrfs_item_ptr_offset(l, path->slots[0]),
- sizeof(root->root_item));
- memcpy(&root->root_key, location, sizeof(*location));
- ret = 0;
-out:
- btrfs_release_path(root, path);
btrfs_free_path(path);
if (ret) {
- kfree(root);
+ if (ret > 0)
+ ret = -ENOENT;
return ERR_PTR(ret);
}
+
generation = btrfs_root_generation(&root->root_item);
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
root->commit_root = btrfs_root_node(root);
BUG_ON(!root->node);
-insert:
- if (location->objectid != BTRFS_TREE_LOG_OBJECTID) {
+out:
+ if (location->objectid != BTRFS_TREE_LOG_OBJECTID)
root->ref_cows = 1;
- ret = btrfs_find_highest_inode(root, &highest_inode);
- if (ret == 0) {
- root->highest_inode = highest_inode;
- root->last_inode_alloc = highest_inode;
- }
- }
+
return root;
}
return fs_info->dev_root;
if (location->objectid == BTRFS_CSUM_TREE_OBJECTID)
return fs_info->csum_root;
-
+again:
+ spin_lock(&fs_info->fs_roots_radix_lock);
root = radix_tree_lookup(&fs_info->fs_roots_radix,
(unsigned long)location->objectid);
+ spin_unlock(&fs_info->fs_roots_radix_lock);
if (root)
return root;
+ ret = btrfs_find_orphan_item(fs_info->tree_root, location->objectid);
+ if (ret == 0)
+ ret = -ENOENT;
+ if (ret < 0)
+ return ERR_PTR(ret);
+
root = btrfs_read_fs_root_no_radix(fs_info->tree_root, location);
if (IS_ERR(root))
return root;
+ WARN_ON(btrfs_root_refs(&root->root_item) == 0);
set_anon_super(&root->anon_super, NULL);
+ ret = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
+ if (ret)
+ goto fail;
+
+ spin_lock(&fs_info->fs_roots_radix_lock);
ret = radix_tree_insert(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
root);
+ if (ret == 0)
+ root->in_radix = 1;
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+ radix_tree_preload_end();
if (ret) {
- free_extent_buffer(root->node);
- kfree(root);
- return ERR_PTR(ret);
+ if (ret == -EEXIST) {
+ free_fs_root(root);
+ goto again;
+ }
+ goto fail;
}
- if (!(fs_info->sb->s_flags & MS_RDONLY)) {
- ret = btrfs_find_dead_roots(fs_info->tree_root,
- root->root_key.objectid);
- BUG_ON(ret);
+
+ ret = btrfs_find_dead_roots(fs_info->tree_root,
+ root->root_key.objectid);
+ WARN_ON(ret);
+
+ if (!(fs_info->sb->s_flags & MS_RDONLY))
btrfs_orphan_cleanup(root);
- }
+
return root;
+fail:
+ free_fs_root(root);
+ return ERR_PTR(ret);
}
struct btrfs_root *btrfs_read_fs_root(struct btrfs_fs_info *fs_info,
struct btrfs_key *location,
const char *name, int namelen)
{
+ return btrfs_read_fs_root_no_name(fs_info, location);
+#if 0
struct btrfs_root *root;
int ret;
kfree(root);
return ERR_PTR(ret);
}
-#if 0
+
ret = btrfs_sysfs_add_root(root);
if (ret) {
free_extent_buffer(root->node);
kfree(root);
return ERR_PTR(ret);
}
-#endif
root->in_sysfs = 1;
return root;
+#endif
}
static int btrfs_congested_fn(void *congested_data, int bdi_bits)
offset = page_offset(page);
em_tree = &BTRFS_I(inode)->extent_tree;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, offset, PAGE_CACHE_SIZE);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em) {
__unplug_io_fn(bdi, page);
return;
err = bdi_register(bdi, NULL, "btrfs-%d",
atomic_inc_return(&btrfs_bdi_num));
- if (err)
+ if (err) {
+ bdi_destroy(bdi);
return err;
+ }
bdi->ra_pages = default_backing_dev_info.ra_pages;
bdi->unplug_io_fn = btrfs_unplug_io_fn;
break;
vfs_check_frozen(root->fs_info->sb, SB_FREEZE_WRITE);
- mutex_lock(&root->fs_info->cleaner_mutex);
- btrfs_clean_old_snapshots(root);
- mutex_unlock(&root->fs_info->cleaner_mutex);
+
+ if (!(root->fs_info->sb->s_flags & MS_RDONLY) &&
+ mutex_trylock(&root->fs_info->cleaner_mutex)) {
+ btrfs_clean_old_snapshots(root);
+ mutex_unlock(&root->fs_info->cleaner_mutex);
+ }
if (freezing(current)) {
refrigerator();
err = -ENOMEM;
goto fail;
}
- INIT_RADIX_TREE(&fs_info->fs_roots_radix, GFP_NOFS);
+
+ ret = init_srcu_struct(&fs_info->subvol_srcu);
+ if (ret) {
+ err = ret;
+ goto fail;
+ }
+
+ ret = setup_bdi(fs_info, &fs_info->bdi);
+ if (ret) {
+ err = ret;
+ goto fail_srcu;
+ }
+
+ fs_info->btree_inode = new_inode(sb);
+ if (!fs_info->btree_inode) {
+ err = -ENOMEM;
+ goto fail_bdi;
+ }
+
+ INIT_RADIX_TREE(&fs_info->fs_roots_radix, GFP_ATOMIC);
INIT_LIST_HEAD(&fs_info->trans_list);
INIT_LIST_HEAD(&fs_info->dead_roots);
INIT_LIST_HEAD(&fs_info->hashers);
INIT_LIST_HEAD(&fs_info->delalloc_inodes);
INIT_LIST_HEAD(&fs_info->ordered_operations);
+ INIT_LIST_HEAD(&fs_info->caching_block_groups);
spin_lock_init(&fs_info->delalloc_lock);
spin_lock_init(&fs_info->new_trans_lock);
spin_lock_init(&fs_info->ref_cache_lock);
+ spin_lock_init(&fs_info->fs_roots_radix_lock);
init_completion(&fs_info->kobj_unregister);
fs_info->tree_root = tree_root;
fs_info->sb = sb;
fs_info->max_extent = (u64)-1;
fs_info->max_inline = 8192 * 1024;
- if (setup_bdi(fs_info, &fs_info->bdi))
- goto fail_bdi;
- fs_info->btree_inode = new_inode(sb);
- fs_info->btree_inode->i_ino = 1;
- fs_info->btree_inode->i_nlink = 1;
fs_info->metadata_ratio = 8;
fs_info->thread_pool_size = min_t(unsigned long,
sb->s_blocksize_bits = blksize_bits(4096);
sb->s_bdi = &fs_info->bdi;
+ fs_info->btree_inode->i_ino = BTRFS_BTREE_INODE_OBJECTID;
+ fs_info->btree_inode->i_nlink = 1;
/*
* we set the i_size on the btree inode to the max possible int.
* the real end of the address space is determined by all of
BTRFS_I(fs_info->btree_inode)->io_tree.ops = &btree_extent_io_ops;
+ BTRFS_I(fs_info->btree_inode)->root = tree_root;
+ memset(&BTRFS_I(fs_info->btree_inode)->location, 0,
+ sizeof(struct btrfs_key));
+ BTRFS_I(fs_info->btree_inode)->dummy_inode = 1;
+ insert_inode_hash(fs_info->btree_inode);
+
spin_lock_init(&fs_info->block_group_cache_lock);
fs_info->block_group_cache_tree.rb_node = NULL;
- extent_io_tree_init(&fs_info->pinned_extents,
+ extent_io_tree_init(&fs_info->freed_extents[0],
fs_info->btree_inode->i_mapping, GFP_NOFS);
+ extent_io_tree_init(&fs_info->freed_extents[1],
+ fs_info->btree_inode->i_mapping, GFP_NOFS);
+ fs_info->pinned_extents = &fs_info->freed_extents[0];
fs_info->do_barriers = 1;
- BTRFS_I(fs_info->btree_inode)->root = tree_root;
- memset(&BTRFS_I(fs_info->btree_inode)->location, 0,
- sizeof(struct btrfs_key));
- insert_inode_hash(fs_info->btree_inode);
mutex_init(&fs_info->trans_mutex);
mutex_init(&fs_info->ordered_operations_mutex);
mutex_init(&fs_info->tree_log_mutex);
- mutex_init(&fs_info->drop_mutex);
mutex_init(&fs_info->chunk_mutex);
mutex_init(&fs_info->transaction_kthread_mutex);
mutex_init(&fs_info->cleaner_mutex);
mutex_init(&fs_info->volume_mutex);
- mutex_init(&fs_info->tree_reloc_mutex);
init_rwsem(&fs_info->extent_commit_sem);
+ init_rwsem(&fs_info->subvol_sem);
btrfs_init_free_cluster(&fs_info->meta_alloc_cluster);
btrfs_init_free_cluster(&fs_info->data_alloc_cluster);
err = -EINVAL;
goto fail_iput;
}
-
+printk("thread pool is %d\n", fs_info->thread_pool_size);
/*
* we need to start all the end_io workers up front because the
* queue work function gets called at interrupt time, and so it
fs_info->endio_workers.idle_thresh = 4;
fs_info->endio_meta_workers.idle_thresh = 4;
- fs_info->endio_write_workers.idle_thresh = 64;
- fs_info->endio_meta_write_workers.idle_thresh = 64;
+ fs_info->endio_write_workers.idle_thresh = 2;
+ fs_info->endio_meta_write_workers.idle_thresh = 2;
+
+ fs_info->endio_workers.atomic_worker_start = 1;
+ fs_info->endio_meta_workers.atomic_worker_start = 1;
+ fs_info->endio_write_workers.atomic_worker_start = 1;
+ fs_info->endio_meta_write_workers.atomic_worker_start = 1;
btrfs_start_workers(&fs_info->workers, 1);
btrfs_start_workers(&fs_info->submit_workers, 1);
btrfs_start_workers(&fs_info->delalloc_workers, 1);
btrfs_start_workers(&fs_info->fixup_workers, 1);
- btrfs_start_workers(&fs_info->endio_workers, fs_info->thread_pool_size);
- btrfs_start_workers(&fs_info->endio_meta_workers,
- fs_info->thread_pool_size);
- btrfs_start_workers(&fs_info->endio_meta_write_workers,
- fs_info->thread_pool_size);
- btrfs_start_workers(&fs_info->endio_write_workers,
- fs_info->thread_pool_size);
+ btrfs_start_workers(&fs_info->endio_workers, 1);
+ btrfs_start_workers(&fs_info->endio_meta_workers, 1);
+ btrfs_start_workers(&fs_info->endio_meta_write_workers, 1);
+ btrfs_start_workers(&fs_info->endio_write_workers, 1);
fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
}
}
+ ret = btrfs_find_orphan_roots(tree_root);
+ BUG_ON(ret);
+
if (!(sb->s_flags & MS_RDONLY)) {
ret = btrfs_recover_relocation(tree_root);
BUG_ON(ret);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
fail_bdi:
bdi_destroy(&fs_info->bdi);
+fail_srcu:
+ cleanup_srcu_struct(&fs_info->subvol_srcu);
fail:
kfree(extent_root);
kfree(tree_root);
int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root)
{
- WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
+ spin_lock(&fs_info->fs_roots_radix_lock);
radix_tree_delete(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid);
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+
+ if (btrfs_root_refs(&root->root_item) == 0)
+ synchronize_srcu(&fs_info->subvol_srcu);
+
+ free_fs_root(root);
+ return 0;
+}
+
+static void free_fs_root(struct btrfs_root *root)
+{
+ WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
if (root->anon_super.s_dev) {
down_write(&root->anon_super.s_umount);
kill_anon_super(&root->anon_super);
}
- if (root->node)
- free_extent_buffer(root->node);
- if (root->commit_root)
- free_extent_buffer(root->commit_root);
+ free_extent_buffer(root->node);
+ free_extent_buffer(root->commit_root);
kfree(root->name);
kfree(root);
- return 0;
}
static int del_fs_roots(struct btrfs_fs_info *fs_info)
struct btrfs_root *gang[8];
int i;
+ while (!list_empty(&fs_info->dead_roots)) {
+ gang[0] = list_entry(fs_info->dead_roots.next,
+ struct btrfs_root, root_list);
+ list_del(&gang[0]->root_list);
+
+ if (gang[0]->in_radix) {
+ btrfs_free_fs_root(fs_info, gang[0]);
+ } else {
+ free_extent_buffer(gang[0]->node);
+ free_extent_buffer(gang[0]->commit_root);
+ kfree(gang[0]);
+ }
+ }
+
while (1) {
ret = radix_tree_gang_lookup(&fs_info->fs_roots_radix,
(void **)gang, 0,
root_objectid = gang[ret - 1]->root_key.objectid + 1;
for (i = 0; i < ret; i++) {
root_objectid = gang[i]->root_key.objectid;
- ret = btrfs_find_dead_roots(fs_info->tree_root,
- root_objectid);
- BUG_ON(ret);
btrfs_orphan_cleanup(gang[i]);
}
root_objectid++;
free_extent_buffer(root->fs_info->csum_root->commit_root);
btrfs_free_block_groups(root->fs_info);
- btrfs_free_pinned_extents(root->fs_info);
del_fs_roots(fs_info);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
bdi_destroy(&fs_info->bdi);
+ cleanup_srcu_struct(&fs_info->subvol_srcu);
kfree(fs_info->extent_root);
kfree(fs_info->tree_root);
len = BTRFS_FID_SIZE_NON_CONNECTABLE;
type = FILEID_BTRFS_WITHOUT_PARENT;
- fid->objectid = BTRFS_I(inode)->location.objectid;
+ fid->objectid = inode->i_ino;
fid->root_objectid = BTRFS_I(inode)->root->objectid;
fid->gen = inode->i_generation;
}
static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
- u64 root_objectid, u32 generation)
+ u64 root_objectid, u32 generation,
+ int check_generation)
{
+ struct btrfs_fs_info *fs_info = btrfs_sb(sb)->fs_info;
struct btrfs_root *root;
+ struct dentry *dentry;
struct inode *inode;
struct btrfs_key key;
+ int index;
+ int err = 0;
+
+ if (objectid < BTRFS_FIRST_FREE_OBJECTID)
+ return ERR_PTR(-ESTALE);
key.objectid = root_objectid;
btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
key.offset = (u64)-1;
- root = btrfs_read_fs_root_no_name(btrfs_sb(sb)->fs_info, &key);
- if (IS_ERR(root))
- return ERR_CAST(root);
+ index = srcu_read_lock(&fs_info->subvol_srcu);
+
+ root = btrfs_read_fs_root_no_name(fs_info, &key);
+ if (IS_ERR(root)) {
+ err = PTR_ERR(root);
+ goto fail;
+ }
+
+ if (btrfs_root_refs(&root->root_item) == 0) {
+ err = -ENOENT;
+ goto fail;
+ }
key.objectid = objectid;
btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
key.offset = 0;
inode = btrfs_iget(sb, &key, root);
- if (IS_ERR(inode))
- return (void *)inode;
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ goto fail;
+ }
+
+ srcu_read_unlock(&fs_info->subvol_srcu, index);
- if (generation != inode->i_generation) {
+ if (check_generation && generation != inode->i_generation) {
iput(inode);
return ERR_PTR(-ESTALE);
}
- return d_obtain_alias(inode);
+ dentry = d_obtain_alias(inode);
+ if (!IS_ERR(dentry))
+ dentry->d_op = &btrfs_dentry_operations;
+ return dentry;
+fail:
+ srcu_read_unlock(&fs_info->subvol_srcu, index);
+ return ERR_PTR(err);
}
static struct dentry *btrfs_fh_to_parent(struct super_block *sb, struct fid *fh,
objectid = fid->parent_objectid;
generation = fid->parent_gen;
- return btrfs_get_dentry(sb, objectid, root_objectid, generation);
+ return btrfs_get_dentry(sb, objectid, root_objectid, generation, 1);
}
static struct dentry *btrfs_fh_to_dentry(struct super_block *sb, struct fid *fh,
root_objectid = fid->root_objectid;
generation = fid->gen;
- return btrfs_get_dentry(sb, objectid, root_objectid, generation);
+ return btrfs_get_dentry(sb, objectid, root_objectid, generation, 1);
}
static struct dentry *btrfs_get_parent(struct dentry *child)
{
struct inode *dir = child->d_inode;
+ static struct dentry *dentry;
struct btrfs_root *root = BTRFS_I(dir)->root;
- struct btrfs_key key;
struct btrfs_path *path;
struct extent_buffer *leaf;
- int slot;
- u64 objectid;
+ struct btrfs_root_ref *ref;
+ struct btrfs_key key;
+ struct btrfs_key found_key;
int ret;
path = btrfs_alloc_path();
- key.objectid = dir->i_ino;
- btrfs_set_key_type(&key, BTRFS_INODE_REF_KEY);
- key.offset = (u64)-1;
+ if (dir->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ key.objectid = root->root_key.objectid;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
+ key.offset = (u64)-1;
+ root = root->fs_info->tree_root;
+ } else {
+ key.objectid = dir->i_ino;
+ key.type = BTRFS_INODE_REF_KEY;
+ key.offset = (u64)-1;
+ }
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (ret < 0) {
- /* Error */
- btrfs_free_path(path);
- return ERR_PTR(ret);
+ if (ret < 0)
+ goto fail;
+
+ BUG_ON(ret == 0);
+ if (path->slots[0] == 0) {
+ ret = -ENOENT;
+ goto fail;
}
+
+ path->slots[0]--;
leaf = path->nodes[0];
- slot = path->slots[0];
- if (ret) {
- /* btrfs_search_slot() returns the slot where we'd want to
- insert a backref for parent inode #0xFFFFFFFFFFFFFFFF.
- The _real_ backref, telling us what the parent inode
- _actually_ is, will be in the slot _before_ the one
- that btrfs_search_slot() returns. */
- if (!slot) {
- /* Unless there is _no_ key in the tree before... */
- btrfs_free_path(path);
- return ERR_PTR(-EIO);
- }
- slot--;
+
+ btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
+ if (found_key.objectid != key.objectid || found_key.type != key.type) {
+ ret = -ENOENT;
+ goto fail;
}
- btrfs_item_key_to_cpu(leaf, &key, slot);
+ if (found_key.type == BTRFS_ROOT_BACKREF_KEY) {
+ ref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_root_ref);
+ key.objectid = btrfs_root_ref_dirid(leaf, ref);
+ } else {
+ key.objectid = found_key.offset;
+ }
btrfs_free_path(path);
- if (key.objectid != dir->i_ino || key.type != BTRFS_INODE_REF_KEY)
- return ERR_PTR(-EINVAL);
-
- objectid = key.offset;
-
- /* If we are already at the root of a subvol, return the real root */
- if (objectid == dir->i_ino)
- return dget(dir->i_sb->s_root);
+ if (found_key.type == BTRFS_ROOT_BACKREF_KEY) {
+ return btrfs_get_dentry(root->fs_info->sb, key.objectid,
+ found_key.offset, 0, 0);
+ }
- /* Build a new key for the inode item */
- key.objectid = objectid;
- btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
+ key.type = BTRFS_INODE_ITEM_KEY;
key.offset = 0;
-
- return d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root));
+ dentry = d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root));
+ if (!IS_ERR(dentry))
+ dentry->d_op = &btrfs_dentry_operations;
+ return dentry;
+fail:
+ btrfs_free_path(path);
+ return ERR_PTR(ret);
}
const struct export_operations btrfs_export_ops = {
#include "locking.h"
#include "free-space-cache.h"
-static int update_reserved_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int reserve);
static int update_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, int alloc,
int mark_free);
+static int update_reserved_extents(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve);
static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
u64 parent, u64 root_objectid,
u64 flags, struct btrfs_disk_key *key,
int level, struct btrfs_key *ins);
-
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force);
+static int pin_down_bytes(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ u64 bytenr, u64 num_bytes,
+ int is_data, int reserved,
+ struct extent_buffer **must_clean);
+static int find_next_key(struct btrfs_path *path, int level,
+ struct btrfs_key *key);
static noinline int
block_group_cache_done(struct btrfs_block_group_cache *cache)
return ret;
}
-/*
- * We always set EXTENT_LOCKED for the super mirror extents so we don't
- * overwrite them, so those bits need to be unset. Also, if we are unmounting
- * with pinned extents still sitting there because we had a block group caching,
- * we need to clear those now, since we are done.
- */
-void btrfs_free_pinned_extents(struct btrfs_fs_info *info)
+static int add_excluded_extent(struct btrfs_root *root,
+ u64 start, u64 num_bytes)
{
- u64 start, end, last = 0;
- int ret;
+ u64 end = start + num_bytes - 1;
+ set_extent_bits(&root->fs_info->freed_extents[0],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
+ set_extent_bits(&root->fs_info->freed_extents[1],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
+ return 0;
+}
- while (1) {
- ret = find_first_extent_bit(&info->pinned_extents, last,
- &start, &end,
- EXTENT_LOCKED|EXTENT_DIRTY);
- if (ret)
- break;
+static void free_excluded_extents(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
+{
+ u64 start, end;
- clear_extent_bits(&info->pinned_extents, start, end,
- EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS);
- last = end+1;
- }
+ start = cache->key.objectid;
+ end = start + cache->key.offset - 1;
+
+ clear_extent_bits(&root->fs_info->freed_extents[0],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
+ clear_extent_bits(&root->fs_info->freed_extents[1],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
}
-static int remove_sb_from_cache(struct btrfs_root *root,
- struct btrfs_block_group_cache *cache)
+static int exclude_super_stripes(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
{
- struct btrfs_fs_info *fs_info = root->fs_info;
u64 bytenr;
u64 *logical;
int stripe_len;
cache->key.objectid, bytenr,
0, &logical, &nr, &stripe_len);
BUG_ON(ret);
+
while (nr--) {
- try_lock_extent(&fs_info->pinned_extents,
- logical[nr],
- logical[nr] + stripe_len - 1, GFP_NOFS);
+ cache->bytes_super += stripe_len;
+ ret = add_excluded_extent(root, logical[nr],
+ stripe_len);
+ BUG_ON(ret);
}
+
kfree(logical);
}
-
return 0;
}
+static struct btrfs_caching_control *
+get_caching_control(struct btrfs_block_group_cache *cache)
+{
+ struct btrfs_caching_control *ctl;
+
+ spin_lock(&cache->lock);
+ if (cache->cached != BTRFS_CACHE_STARTED) {
+ spin_unlock(&cache->lock);
+ return NULL;
+ }
+
+ ctl = cache->caching_ctl;
+ atomic_inc(&ctl->count);
+ spin_unlock(&cache->lock);
+ return ctl;
+}
+
+static void put_caching_control(struct btrfs_caching_control *ctl)
+{
+ if (atomic_dec_and_test(&ctl->count))
+ kfree(ctl);
+}
+
/*
* this is only called by cache_block_group, since we could have freed extents
* we need to check the pinned_extents for any extents that can't be used yet
int ret;
while (start < end) {
- ret = find_first_extent_bit(&info->pinned_extents, start,
+ ret = find_first_extent_bit(info->pinned_extents, start,
&extent_start, &extent_end,
- EXTENT_DIRTY|EXTENT_LOCKED);
+ EXTENT_DIRTY | EXTENT_UPTODATE);
if (ret)
break;
{
struct btrfs_block_group_cache *block_group = data;
struct btrfs_fs_info *fs_info = block_group->fs_info;
- u64 last = 0;
+ struct btrfs_caching_control *caching_ctl = block_group->caching_ctl;
+ struct btrfs_root *extent_root = fs_info->extent_root;
struct btrfs_path *path;
- int ret = 0;
- struct btrfs_key key;
struct extent_buffer *leaf;
- int slot;
+ struct btrfs_key key;
u64 total_found = 0;
-
- BUG_ON(!fs_info);
+ u64 last = 0;
+ u32 nritems;
+ int ret = 0;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
- atomic_inc(&block_group->space_info->caching_threads);
+ exclude_super_stripes(extent_root, block_group);
+ spin_lock(&block_group->space_info->lock);
+ block_group->space_info->bytes_super += block_group->bytes_super;
+ spin_unlock(&block_group->space_info->lock);
+
last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+
/*
* We don't want to deadlock with somebody trying to allocate a new
* extent for the extent root while also trying to search the extent
key.objectid = last;
key.offset = 0;
- btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
+ key.type = BTRFS_EXTENT_ITEM_KEY;
again:
+ mutex_lock(&caching_ctl->mutex);
/* need to make sure the commit_root doesn't disappear */
down_read(&fs_info->extent_commit_sem);
- ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
+ ret = btrfs_search_slot(NULL, extent_root, &key, path, 0, 0);
if (ret < 0)
goto err;
+ leaf = path->nodes[0];
+ nritems = btrfs_header_nritems(leaf);
+
while (1) {
smp_mb();
- if (block_group->fs_info->closing > 1) {
+ if (fs_info->closing > 1) {
last = (u64)-1;
break;
}
- leaf = path->nodes[0];
- slot = path->slots[0];
- if (slot >= btrfs_header_nritems(leaf)) {
- ret = btrfs_next_leaf(fs_info->extent_root, path);
- if (ret < 0)
- goto err;
- else if (ret)
+ if (path->slots[0] < nritems) {
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ } else {
+ ret = find_next_key(path, 0, &key);
+ if (ret)
break;
- if (need_resched() ||
- btrfs_transaction_in_commit(fs_info)) {
- leaf = path->nodes[0];
-
- /* this shouldn't happen, but if the
- * leaf is empty just move on.
- */
- if (btrfs_header_nritems(leaf) == 0)
- break;
- /*
- * we need to copy the key out so that
- * we are sure the next search advances
- * us forward in the btree.
- */
- btrfs_item_key_to_cpu(leaf, &key, 0);
- btrfs_release_path(fs_info->extent_root, path);
- up_read(&fs_info->extent_commit_sem);
+ caching_ctl->progress = last;
+ btrfs_release_path(extent_root, path);
+ up_read(&fs_info->extent_commit_sem);
+ mutex_unlock(&caching_ctl->mutex);
+ if (btrfs_transaction_in_commit(fs_info))
schedule_timeout(1);
- goto again;
- }
+ else
+ cond_resched();
+ goto again;
+ }
+ if (key.objectid < block_group->key.objectid) {
+ path->slots[0]++;
continue;
}
- btrfs_item_key_to_cpu(leaf, &key, slot);
- if (key.objectid < block_group->key.objectid)
- goto next;
if (key.objectid >= block_group->key.objectid +
block_group->key.offset)
break;
- if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) {
+ if (key.type == BTRFS_EXTENT_ITEM_KEY) {
total_found += add_new_free_space(block_group,
fs_info, last,
key.objectid);
last = key.objectid + key.offset;
- }
- if (total_found > (1024 * 1024 * 2)) {
- total_found = 0;
- wake_up(&block_group->caching_q);
+ if (total_found > (1024 * 1024 * 2)) {
+ total_found = 0;
+ wake_up(&caching_ctl->wait);
+ }
}
-next:
path->slots[0]++;
}
ret = 0;
total_found += add_new_free_space(block_group, fs_info, last,
block_group->key.objectid +
block_group->key.offset);
+ caching_ctl->progress = (u64)-1;
spin_lock(&block_group->lock);
+ block_group->caching_ctl = NULL;
block_group->cached = BTRFS_CACHE_FINISHED;
spin_unlock(&block_group->lock);
err:
btrfs_free_path(path);
up_read(&fs_info->extent_commit_sem);
- atomic_dec(&block_group->space_info->caching_threads);
- wake_up(&block_group->caching_q);
+ free_excluded_extents(extent_root, block_group);
+
+ mutex_unlock(&caching_ctl->mutex);
+ wake_up(&caching_ctl->wait);
+
+ put_caching_control(caching_ctl);
+ atomic_dec(&block_group->space_info->caching_threads);
return 0;
}
static int cache_block_group(struct btrfs_block_group_cache *cache)
{
+ struct btrfs_fs_info *fs_info = cache->fs_info;
+ struct btrfs_caching_control *caching_ctl;
struct task_struct *tsk;
int ret = 0;
+ smp_mb();
+ if (cache->cached != BTRFS_CACHE_NO)
+ return 0;
+
+ caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_KERNEL);
+ BUG_ON(!caching_ctl);
+
+ INIT_LIST_HEAD(&caching_ctl->list);
+ mutex_init(&caching_ctl->mutex);
+ init_waitqueue_head(&caching_ctl->wait);
+ caching_ctl->block_group = cache;
+ caching_ctl->progress = cache->key.objectid;
+ /* one for caching kthread, one for caching block group list */
+ atomic_set(&caching_ctl->count, 2);
+
spin_lock(&cache->lock);
if (cache->cached != BTRFS_CACHE_NO) {
spin_unlock(&cache->lock);
- return ret;
+ kfree(caching_ctl);
+ return 0;
}
+ cache->caching_ctl = caching_ctl;
cache->cached = BTRFS_CACHE_STARTED;
spin_unlock(&cache->lock);
+ down_write(&fs_info->extent_commit_sem);
+ list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups);
+ up_write(&fs_info->extent_commit_sem);
+
+ atomic_inc(&cache->space_info->caching_threads);
+
tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
cache->key.objectid);
if (IS_ERR(tsk)) {
parent, ref_root, flags,
ref->objectid, ref->offset,
&ins, node->ref_mod);
- update_reserved_extents(root, ins.objectid, ins.offset, 0);
} else if (node->action == BTRFS_ADD_DELAYED_REF) {
ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
node->num_bytes, parent,
extent_op->flags_to_set,
&extent_op->key,
ref->level, &ins);
- update_reserved_extents(root, ins.objectid, ins.offset, 0);
} else if (node->action == BTRFS_ADD_DELAYED_REF) {
ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
node->num_bytes, parent, ref_root,
BUG_ON(extent_op);
head = btrfs_delayed_node_to_head(node);
if (insert_reserved) {
+ int mark_free = 0;
+ struct extent_buffer *must_clean = NULL;
+
+ ret = pin_down_bytes(trans, root, NULL,
+ node->bytenr, node->num_bytes,
+ head->is_data, 1, &must_clean);
+ if (ret > 0)
+ mark_free = 1;
+
+ if (must_clean) {
+ clean_tree_block(NULL, root, must_clean);
+ btrfs_tree_unlock(must_clean);
+ free_extent_buffer(must_clean);
+ }
if (head->is_data) {
ret = btrfs_del_csums(trans, root,
node->bytenr,
node->num_bytes);
BUG_ON(ret);
}
- btrfs_update_pinned_extents(root, node->bytenr,
- node->num_bytes, 1);
- update_reserved_extents(root, node->bytenr,
- node->num_bytes, 0);
+ if (mark_free) {
+ ret = btrfs_free_reserved_extent(root,
+ node->bytenr,
+ node->num_bytes);
+ BUG_ON(ret);
+ }
}
mutex_unlock(&head->mutex);
return 0;
/* get the space info for where the metadata will live */
alloc_target = btrfs_get_alloc_profile(root, 0);
meta_sinfo = __find_space_info(info, alloc_target);
+ if (!meta_sinfo)
+ goto alloc;
again:
spin_lock(&meta_sinfo->lock);
do_div(thresh, 100);
if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
- meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) {
+ meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+ meta_sinfo->bytes_super > thresh) {
struct btrfs_trans_handle *trans;
if (!meta_sinfo->full) {
meta_sinfo->force_alloc = 1;
spin_unlock(&meta_sinfo->lock);
-
+alloc:
trans = btrfs_start_transaction(root, 1);
if (!trans)
return -ENOMEM;
ret = do_chunk_alloc(trans, root->fs_info->extent_root,
2 * 1024 * 1024, alloc_target, 0);
btrfs_end_transaction(trans, root);
+ if (!meta_sinfo) {
+ meta_sinfo = __find_space_info(info,
+ alloc_target);
+ }
goto again;
}
spin_unlock(&meta_sinfo->lock);
bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
data_sinfo = BTRFS_I(inode)->space_info;
+ if (!data_sinfo)
+ goto alloc;
+
again:
/* make sure we have enough space to handle the data first */
spin_lock(&data_sinfo->lock);
if (data_sinfo->total_bytes - data_sinfo->bytes_used -
data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
- data_sinfo->bytes_may_use < bytes) {
+ data_sinfo->bytes_may_use - data_sinfo->bytes_super < bytes) {
struct btrfs_trans_handle *trans;
/*
data_sinfo->force_alloc = 1;
spin_unlock(&data_sinfo->lock);
-
+alloc:
alloc_target = btrfs_get_alloc_profile(root, 1);
trans = btrfs_start_transaction(root, 1);
if (!trans)
btrfs_end_transaction(trans, root);
if (ret)
return ret;
+
+ if (!data_sinfo) {
+ btrfs_set_inode_space_info(root, inode);
+ data_sinfo = BTRFS_I(inode)->space_info;
+ }
goto again;
}
spin_unlock(&data_sinfo->lock);
num_bytes = min(total, cache->key.offset - byte_in_group);
if (alloc) {
old_val += num_bytes;
+ btrfs_set_block_group_used(&cache->item, old_val);
+ cache->reserved -= num_bytes;
cache->space_info->bytes_used += num_bytes;
+ cache->space_info->bytes_reserved -= num_bytes;
if (cache->ro)
cache->space_info->bytes_readonly -= num_bytes;
- btrfs_set_block_group_used(&cache->item, old_val);
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
} else {
return bytenr;
}
-int btrfs_update_pinned_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int pin)
+/*
+ * this function must be called within transaction
+ */
+int btrfs_pin_extent(struct btrfs_root *root,
+ u64 bytenr, u64 num_bytes, int reserved)
{
- u64 len;
- struct btrfs_block_group_cache *cache;
struct btrfs_fs_info *fs_info = root->fs_info;
+ struct btrfs_block_group_cache *cache;
- if (pin)
- set_extent_dirty(&fs_info->pinned_extents,
- bytenr, bytenr + num - 1, GFP_NOFS);
-
- while (num > 0) {
- cache = btrfs_lookup_block_group(fs_info, bytenr);
- BUG_ON(!cache);
- len = min(num, cache->key.offset -
- (bytenr - cache->key.objectid));
- if (pin) {
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- cache->pinned += len;
- cache->space_info->bytes_pinned += len;
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
- fs_info->total_pinned += len;
- } else {
- int unpin = 0;
+ cache = btrfs_lookup_block_group(fs_info, bytenr);
+ BUG_ON(!cache);
- /*
- * in order to not race with the block group caching, we
- * only want to unpin the extent if we are cached. If
- * we aren't cached, we want to start async caching this
- * block group so we can free the extent the next time
- * around.
- */
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- unpin = (cache->cached == BTRFS_CACHE_FINISHED);
- if (likely(unpin)) {
- cache->pinned -= len;
- cache->space_info->bytes_pinned -= len;
- fs_info->total_pinned -= len;
- }
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
+ spin_lock(&cache->space_info->lock);
+ spin_lock(&cache->lock);
+ cache->pinned += num_bytes;
+ cache->space_info->bytes_pinned += num_bytes;
+ if (reserved) {
+ cache->reserved -= num_bytes;
+ cache->space_info->bytes_reserved -= num_bytes;
+ }
+ spin_unlock(&cache->lock);
+ spin_unlock(&cache->space_info->lock);
- if (likely(unpin))
- clear_extent_dirty(&fs_info->pinned_extents,
- bytenr, bytenr + len -1,
- GFP_NOFS);
- else
- cache_block_group(cache);
+ btrfs_put_block_group(cache);
- if (unpin)
- btrfs_add_free_space(cache, bytenr, len);
- }
- btrfs_put_block_group(cache);
- bytenr += len;
- num -= len;
+ set_extent_dirty(fs_info->pinned_extents,
+ bytenr, bytenr + num_bytes - 1, GFP_NOFS);
+ return 0;
+}
+
+static int update_reserved_extents(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve)
+{
+ spin_lock(&cache->space_info->lock);
+ spin_lock(&cache->lock);
+ if (reserve) {
+ cache->reserved += num_bytes;
+ cache->space_info->bytes_reserved += num_bytes;
+ } else {
+ cache->reserved -= num_bytes;
+ cache->space_info->bytes_reserved -= num_bytes;
}
+ spin_unlock(&cache->lock);
+ spin_unlock(&cache->space_info->lock);
return 0;
}
-static int update_reserved_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int reserve)
+int btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
{
- u64 len;
- struct btrfs_block_group_cache *cache;
struct btrfs_fs_info *fs_info = root->fs_info;
+ struct btrfs_caching_control *next;
+ struct btrfs_caching_control *caching_ctl;
+ struct btrfs_block_group_cache *cache;
- while (num > 0) {
- cache = btrfs_lookup_block_group(fs_info, bytenr);
- BUG_ON(!cache);
- len = min(num, cache->key.offset -
- (bytenr - cache->key.objectid));
+ down_write(&fs_info->extent_commit_sem);
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- if (reserve) {
- cache->reserved += len;
- cache->space_info->bytes_reserved += len;
+ list_for_each_entry_safe(caching_ctl, next,
+ &fs_info->caching_block_groups, list) {
+ cache = caching_ctl->block_group;
+ if (block_group_cache_done(cache)) {
+ cache->last_byte_to_unpin = (u64)-1;
+ list_del_init(&caching_ctl->list);
+ put_caching_control(caching_ctl);
} else {
- cache->reserved -= len;
- cache->space_info->bytes_reserved -= len;
+ cache->last_byte_to_unpin = caching_ctl->progress;
}
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
- btrfs_put_block_group(cache);
- bytenr += len;
- num -= len;
}
+
+ if (fs_info->pinned_extents == &fs_info->freed_extents[0])
+ fs_info->pinned_extents = &fs_info->freed_extents[1];
+ else
+ fs_info->pinned_extents = &fs_info->freed_extents[0];
+
+ up_write(&fs_info->extent_commit_sem);
return 0;
}
-int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy)
+static int unpin_extent_range(struct btrfs_root *root, u64 start, u64 end)
{
- u64 last = 0;
- u64 start;
- u64 end;
- struct extent_io_tree *pinned_extents = &root->fs_info->pinned_extents;
- int ret;
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ struct btrfs_block_group_cache *cache = NULL;
+ u64 len;
- while (1) {
- ret = find_first_extent_bit(pinned_extents, last,
- &start, &end, EXTENT_DIRTY);
- if (ret)
- break;
+ while (start <= end) {
+ if (!cache ||
+ start >= cache->key.objectid + cache->key.offset) {
+ if (cache)
+ btrfs_put_block_group(cache);
+ cache = btrfs_lookup_block_group(fs_info, start);
+ BUG_ON(!cache);
+ }
+
+ len = cache->key.objectid + cache->key.offset - start;
+ len = min(len, end + 1 - start);
+
+ if (start < cache->last_byte_to_unpin) {
+ len = min(len, cache->last_byte_to_unpin - start);
+ btrfs_add_free_space(cache, start, len);
+ }
+
+ spin_lock(&cache->space_info->lock);
+ spin_lock(&cache->lock);
+ cache->pinned -= len;
+ cache->space_info->bytes_pinned -= len;
+ spin_unlock(&cache->lock);
+ spin_unlock(&cache->space_info->lock);
- set_extent_dirty(copy, start, end, GFP_NOFS);
- last = end + 1;
+ start += len;
}
+
+ if (cache)
+ btrfs_put_block_group(cache);
return 0;
}
int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct extent_io_tree *unpin)
+ struct btrfs_root *root)
{
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ struct extent_io_tree *unpin;
u64 start;
u64 end;
int ret;
+ if (fs_info->pinned_extents == &fs_info->freed_extents[0])
+ unpin = &fs_info->freed_extents[1];
+ else
+ unpin = &fs_info->freed_extents[0];
+
while (1) {
ret = find_first_extent_bit(unpin, 0, &start, &end,
EXTENT_DIRTY);
ret = btrfs_discard_extent(root, start, end + 1 - start);
- /* unlocks the pinned mutex */
- btrfs_update_pinned_extents(root, start, end + 1 - start, 0);
clear_extent_dirty(unpin, start, end, GFP_NOFS);
-
+ unpin_extent_range(root, start, end);
cond_resched();
}
static int pin_down_bytes(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
- u64 bytenr, u64 num_bytes, int is_data,
+ u64 bytenr, u64 num_bytes,
+ int is_data, int reserved,
struct extent_buffer **must_clean)
{
int err = 0;
}
free_extent_buffer(buf);
pinit:
- btrfs_set_path_blocking(path);
+ if (path)
+ btrfs_set_path_blocking(path);
/* unlocks the pinned mutex */
- btrfs_update_pinned_extents(root, bytenr, num_bytes, 1);
+ btrfs_pin_extent(root, bytenr, num_bytes, reserved);
BUG_ON(err < 0);
return 0;
}
-
static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
}
ret = pin_down_bytes(trans, root, path, bytenr,
- num_bytes, is_data, &must_clean);
+ num_bytes, is_data, 0, &must_clean);
if (ret > 0)
mark_free = 1;
BUG_ON(ret < 0);
if (root_objectid == BTRFS_TREE_LOG_OBJECTID) {
WARN_ON(owner >= BTRFS_FIRST_FREE_OBJECTID);
/* unlocks the pinned mutex */
- btrfs_update_pinned_extents(root, bytenr, num_bytes, 1);
- update_reserved_extents(root, bytenr, num_bytes, 0);
+ btrfs_pin_extent(root, bytenr, num_bytes, 1);
ret = 0;
} else if (owner < BTRFS_FIRST_FREE_OBJECTID) {
ret = btrfs_add_delayed_tree_ref(trans, bytenr, num_bytes,
wait_block_group_cache_progress(struct btrfs_block_group_cache *cache,
u64 num_bytes)
{
+ struct btrfs_caching_control *caching_ctl;
DEFINE_WAIT(wait);
- prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE);
-
- if (block_group_cache_done(cache)) {
- finish_wait(&cache->caching_q, &wait);
+ caching_ctl = get_caching_control(cache);
+ if (!caching_ctl)
return 0;
- }
- schedule();
- finish_wait(&cache->caching_q, &wait);
- wait_event(cache->caching_q, block_group_cache_done(cache) ||
+ wait_event(caching_ctl->wait, block_group_cache_done(cache) ||
(cache->free_space >= num_bytes));
+
+ put_caching_control(caching_ctl);
+ return 0;
+}
+
+static noinline int
+wait_block_group_cache_done(struct btrfs_block_group_cache *cache)
+{
+ struct btrfs_caching_control *caching_ctl;
+ DEFINE_WAIT(wait);
+
+ caching_ctl = get_caching_control(cache);
+ if (!caching_ctl)
+ return 0;
+
+ wait_event(caching_ctl->wait, block_group_cache_done(cache));
+
+ put_caching_control(caching_ctl);
return 0;
}
int last_ptr_loop = 0;
int loop = 0;
bool found_uncached_bg = false;
+ bool failed_cluster_refill = false;
WARN_ON(num_bytes < root->sectorsize);
btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
if (unlikely(block_group->ro))
goto loop;
- if (last_ptr) {
+ /*
+ * Ok we want to try and use the cluster allocator, so lets look
+ * there, unless we are on LOOP_NO_EMPTY_SIZE, since we will
+ * have tried the cluster allocator plenty of times at this
+ * point and not have found anything, so we are likely way too
+ * fragmented for the clustering stuff to find anything, so lets
+ * just skip it and let the allocator find whatever block it can
+ * find
+ */
+ if (last_ptr && loop < LOOP_NO_EMPTY_SIZE) {
/*
* the refill lock keeps out other
* people trying to start a new cluster
spin_unlock(&last_ptr->refill_lock);
goto checks;
}
- } else if (!cached && loop > LOOP_CACHING_NOWAIT) {
+ } else if (!cached && loop > LOOP_CACHING_NOWAIT
+ && !failed_cluster_refill) {
spin_unlock(&last_ptr->refill_lock);
+ failed_cluster_refill = true;
wait_block_group_cache_progress(block_group,
num_bytes + empty_cluster + empty_size);
goto have_block_group;
* cluster. Free the cluster we've been trying
* to use, and go to the next block group
*/
- if (loop < LOOP_NO_EMPTY_SIZE) {
- btrfs_return_cluster_to_free_space(NULL,
- last_ptr);
- spin_unlock(&last_ptr->refill_lock);
- goto loop;
- }
+ btrfs_return_cluster_to_free_space(NULL, last_ptr);
spin_unlock(&last_ptr->refill_lock);
+ goto loop;
}
offset = btrfs_find_space_for_alloc(block_group, search_start,
search_start - offset);
BUG_ON(offset > search_start);
+ update_reserved_extents(block_group, num_bytes, 1);
+
/* we are all good, lets return */
break;
loop:
+ failed_cluster_refill = false;
btrfs_put_block_group(block_group);
}
up_read(&space_info->groups_sem);
up_read(&info->groups_sem);
}
-static int __btrfs_reserve_extent(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 num_bytes, u64 min_alloc_size,
- u64 empty_size, u64 hint_byte,
- u64 search_end, struct btrfs_key *ins,
- u64 data)
+int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ u64 num_bytes, u64 min_alloc_size,
+ u64 empty_size, u64 hint_byte,
+ u64 search_end, struct btrfs_key *ins,
+ u64 data)
{
int ret;
u64 search_start = 0;
ret = btrfs_discard_extent(root, start, len);
btrfs_add_free_space(cache, start, len);
+ update_reserved_extents(cache, len, 0);
btrfs_put_block_group(cache);
- update_reserved_extents(root, start, len, 0);
-
- return ret;
-}
-
-int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 num_bytes, u64 min_alloc_size,
- u64 empty_size, u64 hint_byte,
- u64 search_end, struct btrfs_key *ins,
- u64 data)
-{
- int ret;
- ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size,
- empty_size, hint_byte, search_end, ins,
- data);
- if (!ret)
- update_reserved_extents(root, ins->objectid, ins->offset, 1);
return ret;
}
{
int ret;
struct btrfs_block_group_cache *block_group;
+ struct btrfs_caching_control *caching_ctl;
+ u64 start = ins->objectid;
+ u64 num_bytes = ins->offset;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
cache_block_group(block_group);
- wait_event(block_group->caching_q,
- block_group_cache_done(block_group));
+ caching_ctl = get_caching_control(block_group);
- ret = btrfs_remove_free_space(block_group, ins->objectid,
- ins->offset);
- BUG_ON(ret);
+ if (!caching_ctl) {
+ BUG_ON(!block_group_cache_done(block_group));
+ ret = btrfs_remove_free_space(block_group, start, num_bytes);
+ BUG_ON(ret);
+ } else {
+ mutex_lock(&caching_ctl->mutex);
+
+ if (start >= caching_ctl->progress) {
+ ret = add_excluded_extent(root, start, num_bytes);
+ BUG_ON(ret);
+ } else if (start + num_bytes <= caching_ctl->progress) {
+ ret = btrfs_remove_free_space(block_group,
+ start, num_bytes);
+ BUG_ON(ret);
+ } else {
+ num_bytes = caching_ctl->progress - start;
+ ret = btrfs_remove_free_space(block_group,
+ start, num_bytes);
+ BUG_ON(ret);
+
+ start = caching_ctl->progress;
+ num_bytes = ins->objectid + ins->offset -
+ caching_ctl->progress;
+ ret = add_excluded_extent(root, start, num_bytes);
+ BUG_ON(ret);
+ }
+
+ mutex_unlock(&caching_ctl->mutex);
+ put_caching_control(caching_ctl);
+ }
+
+ update_reserved_extents(block_group, ins->offset, 1);
btrfs_put_block_group(block_group);
ret = alloc_reserved_file_extent(trans, root, 0, root_objectid,
0, owner, offset, ins, 1);
int ret;
u64 flags = 0;
- ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
- empty_size, hint_byte, search_end,
- ins, 0);
+ ret = btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
+ empty_size, hint_byte, search_end,
+ ins, 0);
if (ret)
return ret;
} else
BUG_ON(parent > 0);
- update_reserved_extents(root, ins->objectid, ins->offset, 1);
if (root_objectid != BTRFS_TREE_LOG_OBJECTID) {
struct btrfs_delayed_extent_op *extent_op;
extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
return buf;
}
-#if 0
-int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, struct extent_buffer *leaf)
+struct walk_control {
+ u64 refs[BTRFS_MAX_LEVEL];
+ u64 flags[BTRFS_MAX_LEVEL];
+ struct btrfs_key update_progress;
+ int stage;
+ int level;
+ int shared_level;
+ int update_ref;
+ int keep_locks;
+ int reada_slot;
+ int reada_count;
+};
+
+#define DROP_REFERENCE 1
+#define UPDATE_BACKREF 2
+
+static noinline void reada_walk_down(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct walk_control *wc,
+ struct btrfs_path *path)
{
- u64 disk_bytenr;
- u64 num_bytes;
- struct btrfs_key key;
- struct btrfs_file_extent_item *fi;
+ u64 bytenr;
+ u64 generation;
+ u64 refs;
+ u64 last = 0;
u32 nritems;
- int i;
+ u32 blocksize;
+ struct btrfs_key key;
+ struct extent_buffer *eb;
int ret;
+ int slot;
+ int nread = 0;
- BUG_ON(!btrfs_is_leaf(leaf));
- nritems = btrfs_header_nritems(leaf);
+ if (path->slots[wc->level] < wc->reada_slot) {
+ wc->reada_count = wc->reada_count * 2 / 3;
+ wc->reada_count = max(wc->reada_count, 2);
+ } else {
+ wc->reada_count = wc->reada_count * 3 / 2;
+ wc->reada_count = min_t(int, wc->reada_count,
+ BTRFS_NODEPTRS_PER_BLOCK(root));
+ }
- for (i = 0; i < nritems; i++) {
- cond_resched();
- btrfs_item_key_to_cpu(leaf, &key, i);
+ eb = path->nodes[wc->level];
+ nritems = btrfs_header_nritems(eb);
+ blocksize = btrfs_level_size(root, wc->level - 1);
- /* only extents have references, skip everything else */
- if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
- continue;
-
- fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
-
- /* inline extents live in the btree, they don't have refs */
- if (btrfs_file_extent_type(leaf, fi) ==
- BTRFS_FILE_EXTENT_INLINE)
- continue;
-
- disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
-
- /* holes don't have refs */
- if (disk_bytenr == 0)
- continue;
-
- num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
- ret = btrfs_free_extent(trans, root, disk_bytenr, num_bytes,
- leaf->start, 0, key.objectid, 0);
- BUG_ON(ret);
- }
- return 0;
-}
-
-static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_leaf_ref *ref)
-{
- int i;
- int ret;
- struct btrfs_extent_info *info;
- struct refsort *sorted;
-
- if (ref->nritems == 0)
- return 0;
-
- sorted = kmalloc(sizeof(*sorted) * ref->nritems, GFP_NOFS);
- for (i = 0; i < ref->nritems; i++) {
- sorted[i].bytenr = ref->extents[i].bytenr;
- sorted[i].slot = i;
- }
- sort(sorted, ref->nritems, sizeof(struct refsort), refsort_cmp, NULL);
+ for (slot = path->slots[wc->level]; slot < nritems; slot++) {
+ if (nread >= wc->reada_count)
+ break;
- /*
- * the items in the ref were sorted when the ref was inserted
- * into the ref cache, so this is already in order
- */
- for (i = 0; i < ref->nritems; i++) {
- info = ref->extents + sorted[i].slot;
- ret = btrfs_free_extent(trans, root, info->bytenr,
- info->num_bytes, ref->bytenr,
- ref->owner, ref->generation,
- info->objectid, 0);
-
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
cond_resched();
+ bytenr = btrfs_node_blockptr(eb, slot);
+ generation = btrfs_node_ptr_generation(eb, slot);
- BUG_ON(ret);
- info++;
- }
-
- kfree(sorted);
- return 0;
-}
-
-
-static int drop_snap_lookup_refcount(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, u64 start,
- u64 len, u32 *refs)
-{
- int ret;
-
- ret = btrfs_lookup_extent_refs(trans, root, start, len, refs);
- BUG_ON(ret);
-
-#if 0 /* some debugging code in case we see problems here */
- /* if the refs count is one, it won't get increased again. But
- * if the ref count is > 1, someone may be decreasing it at
- * the same time we are.
- */
- if (*refs != 1) {
- struct extent_buffer *eb = NULL;
- eb = btrfs_find_create_tree_block(root, start, len);
- if (eb)
- btrfs_tree_lock(eb);
-
- mutex_lock(&root->fs_info->alloc_mutex);
- ret = lookup_extent_ref(NULL, root, start, len, refs);
- BUG_ON(ret);
- mutex_unlock(&root->fs_info->alloc_mutex);
-
- if (eb) {
- btrfs_tree_unlock(eb);
- free_extent_buffer(eb);
- }
- if (*refs == 1) {
- printk(KERN_ERR "btrfs block %llu went down to one "
- "during drop_snap\n", (unsigned long long)start);
- }
-
- }
-#endif
-
- cond_resched();
- return ret;
-}
-
+ if (slot == path->slots[wc->level])
+ goto reada;
-/*
- * this is used while deleting old snapshots, and it drops the refs
- * on a whole subtree starting from a level 1 node.
- *
- * The idea is to sort all the leaf pointers, and then drop the
- * ref on all the leaves in order. Most of the time the leaves
- * will have ref cache entries, so no leaf IOs will be required to
- * find the extents they have references on.
- *
- * For each leaf, any references it has are also dropped in order
- *
- * This ends up dropping the references in something close to optimal
- * order for reading and modifying the extent allocation tree.
- */
-static noinline int drop_level_one_refs(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_path *path)
-{
- u64 bytenr;
- u64 root_owner;
- u64 root_gen;
- struct extent_buffer *eb = path->nodes[1];
- struct extent_buffer *leaf;
- struct btrfs_leaf_ref *ref;
- struct refsort *sorted = NULL;
- int nritems = btrfs_header_nritems(eb);
- int ret;
- int i;
- int refi = 0;
- int slot = path->slots[1];
- u32 blocksize = btrfs_level_size(root, 0);
- u32 refs;
-
- if (nritems == 0)
- goto out;
-
- root_owner = btrfs_header_owner(eb);
- root_gen = btrfs_header_generation(eb);
- sorted = kmalloc(sizeof(*sorted) * nritems, GFP_NOFS);
-
- /*
- * step one, sort all the leaf pointers so we don't scribble
- * randomly into the extent allocation tree
- */
- for (i = slot; i < nritems; i++) {
- sorted[refi].bytenr = btrfs_node_blockptr(eb, i);
- sorted[refi].slot = i;
- refi++;
- }
-
- /*
- * nritems won't be zero, but if we're picking up drop_snapshot
- * after a crash, slot might be > 0, so double check things
- * just in case.
- */
- if (refi == 0)
- goto out;
-
- sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
-
- /*
- * the first loop frees everything the leaves point to
- */
- for (i = 0; i < refi; i++) {
- u64 ptr_gen;
-
- bytenr = sorted[i].bytenr;
-
- /*
- * check the reference count on this leaf. If it is > 1
- * we just decrement it below and don't update any
- * of the refs the leaf points to.
- */
- ret = drop_snap_lookup_refcount(trans, root, bytenr,
- blocksize, &refs);
- BUG_ON(ret);
- if (refs != 1)
+ if (wc->stage == UPDATE_BACKREF &&
+ generation <= root->root_key.offset)
continue;
- ptr_gen = btrfs_node_ptr_generation(eb, sorted[i].slot);
-
- /*
- * the leaf only had one reference, which means the
- * only thing pointing to this leaf is the snapshot
- * we're deleting. It isn't possible for the reference
- * count to increase again later
- *
- * The reference cache is checked for the leaf,
- * and if found we'll be able to drop any refs held by
- * the leaf without needing to read it in.
- */
- ref = btrfs_lookup_leaf_ref(root, bytenr);
- if (ref && ref->generation != ptr_gen) {
- btrfs_free_leaf_ref(root, ref);
- ref = NULL;
- }
- if (ref) {
- ret = cache_drop_leaf_ref(trans, root, ref);
- BUG_ON(ret);
- btrfs_remove_leaf_ref(root, ref);
- btrfs_free_leaf_ref(root, ref);
- } else {
- /*
- * the leaf wasn't in the reference cache, so
- * we have to read it.
- */
- leaf = read_tree_block(root, bytenr, blocksize,
- ptr_gen);
- ret = btrfs_drop_leaf_ref(trans, root, leaf);
+ if (wc->stage == DROP_REFERENCE) {
+ ret = btrfs_lookup_extent_info(trans, root,
+ bytenr, blocksize,
+ &refs, NULL);
BUG_ON(ret);
- free_extent_buffer(leaf);
- }
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
- cond_resched();
- }
-
- /*
- * run through the loop again to free the refs on the leaves.
- * This is faster than doing it in the loop above because
- * the leaves are likely to be clustered together. We end up
- * working in nice chunks on the extent allocation tree.
- */
- for (i = 0; i < refi; i++) {
- bytenr = sorted[i].bytenr;
- ret = btrfs_free_extent(trans, root, bytenr,
- blocksize, eb->start,
- root_owner, root_gen, 0, 1);
- BUG_ON(ret);
+ BUG_ON(refs == 0);
+ if (refs == 1)
+ goto reada;
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
- cond_resched();
- }
-out:
- kfree(sorted);
-
- /*
- * update the path to show we've processed the entire level 1
- * node. This will get saved into the root's drop_snapshot_progress
- * field so these drops are not repeated again if this transaction
- * commits.
- */
- path->slots[1] = nritems;
- return 0;
-}
-
-/*
- * helper function for drop_snapshot, this walks down the tree dropping ref
- * counts as it goes.
- */
-static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_path *path, int *level)
-{
- u64 root_owner;
- u64 root_gen;
- u64 bytenr;
- u64 ptr_gen;
- struct extent_buffer *next;
- struct extent_buffer *cur;
- struct extent_buffer *parent;
- u32 blocksize;
- int ret;
- u32 refs;
-
- WARN_ON(*level < 0);
- WARN_ON(*level >= BTRFS_MAX_LEVEL);
- ret = drop_snap_lookup_refcount(trans, root, path->nodes[*level]->start,
- path->nodes[*level]->len, &refs);
- BUG_ON(ret);
- if (refs > 1)
- goto out;
-
- /*
- * walk down to the last node level and free all the leaves
- */
- while (*level >= 0) {
- WARN_ON(*level < 0);
- WARN_ON(*level >= BTRFS_MAX_LEVEL);
- cur = path->nodes[*level];
-
- if (btrfs_header_level(cur) != *level)
- WARN_ON(1);
-
- if (path->slots[*level] >=
- btrfs_header_nritems(cur))
- break;
-
- /* the new code goes down to level 1 and does all the
- * leaves pointed to that node in bulk. So, this check
- * for level 0 will always be false.
- *
- * But, the disk format allows the drop_snapshot_progress
- * field in the root to leave things in a state where
- * a leaf will need cleaning up here. If someone crashes
- * with the old code and then boots with the new code,
- * we might find a leaf here.
- */
- if (*level == 0) {
- ret = btrfs_drop_leaf_ref(trans, root, cur);
- BUG_ON(ret);
- break;
+ if (!wc->update_ref ||
+ generation <= root->root_key.offset)
+ continue;
+ btrfs_node_key_to_cpu(eb, &key, slot);
+ ret = btrfs_comp_cpu_keys(&key,
+ &wc->update_progress);
+ if (ret < 0)
+ continue;
}
-
- /*
- * once we get to level one, process the whole node
- * at once, including everything below it.
- */
- if (*level == 1) {
- ret = drop_level_one_refs(trans, root, path);
- BUG_ON(ret);
+reada:
+ ret = readahead_tree_block(root, bytenr, blocksize,
+ generation);
+ if (ret)
break;
- }
-
- bytenr = btrfs_node_blockptr(cur, path->slots[*level]);
- ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]);
- blocksize = btrfs_level_size(root, *level - 1);
-
- ret = drop_snap_lookup_refcount(trans, root, bytenr,
- blocksize, &refs);
- BUG_ON(ret);
-
- /*
- * if there is more than one reference, we don't need
- * to read that node to drop any references it has. We
- * just drop the ref we hold on that node and move on to the
- * next slot in this level.
- */
- if (refs != 1) {
- parent = path->nodes[*level];
- root_owner = btrfs_header_owner(parent);
- root_gen = btrfs_header_generation(parent);
- path->slots[*level]++;
-
- ret = btrfs_free_extent(trans, root, bytenr,
- blocksize, parent->start,
- root_owner, root_gen,
- *level - 1, 1);
- BUG_ON(ret);
-
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
- cond_resched();
-
- continue;
- }
-
- /*
- * we need to keep freeing things in the next level down.
- * read the block and loop around to process it
- */
- next = read_tree_block(root, bytenr, blocksize, ptr_gen);
- WARN_ON(*level <= 0);
- if (path->nodes[*level-1])
- free_extent_buffer(path->nodes[*level-1]);
- path->nodes[*level-1] = next;
- *level = btrfs_header_level(next);
- path->slots[*level] = 0;
- cond_resched();
+ last = bytenr + blocksize;
+ nread++;
}
-out:
- WARN_ON(*level < 0);
- WARN_ON(*level >= BTRFS_MAX_LEVEL);
-
- if (path->nodes[*level] == root->node) {
- parent = path->nodes[*level];
- bytenr = path->nodes[*level]->start;
- } else {
- parent = path->nodes[*level + 1];
- bytenr = btrfs_node_blockptr(parent, path->slots[*level + 1]);
- }
-
- blocksize = btrfs_level_size(root, *level);
- root_owner = btrfs_header_owner(parent);
- root_gen = btrfs_header_generation(parent);
-
- /*
- * cleanup and free the reference on the last node
- * we processed
- */
- ret = btrfs_free_extent(trans, root, bytenr, blocksize,
- parent->start, root_owner, root_gen,
- *level, 1);
- free_extent_buffer(path->nodes[*level]);
- path->nodes[*level] = NULL;
-
- *level += 1;
- BUG_ON(ret);
-
- cond_resched();
- return 0;
+ wc->reada_slot = slot;
}
-#endif
-
-struct walk_control {
- u64 refs[BTRFS_MAX_LEVEL];
- u64 flags[BTRFS_MAX_LEVEL];
- struct btrfs_key update_progress;
- int stage;
- int level;
- int shared_level;
- int update_ref;
- int keep_locks;
-};
-
-#define DROP_REFERENCE 1
-#define UPDATE_BACKREF 2
/*
* hepler to process tree block while walking down the tree.
*
- * when wc->stage == DROP_REFERENCE, this function checks
- * reference count of the block. if the block is shared and
- * we need update back refs for the subtree rooted at the
- * block, this function changes wc->stage to UPDATE_BACKREF
- *
* when wc->stage == UPDATE_BACKREF, this function updates
* back refs for pointers in the block.
*
{
int level = wc->level;
struct extent_buffer *eb = path->nodes[level];
- struct btrfs_key key;
u64 flag = BTRFS_BLOCK_FLAG_FULL_BACKREF;
int ret;
BUG_ON(wc->refs[level] == 0);
}
- if (wc->stage == DROP_REFERENCE &&
- wc->update_ref && wc->refs[level] > 1) {
- BUG_ON(eb == root->node);
- BUG_ON(path->slots[level] > 0);
- if (level == 0)
- btrfs_item_key_to_cpu(eb, &key, path->slots[level]);
- else
- btrfs_node_key_to_cpu(eb, &key, path->slots[level]);
- if (btrfs_header_owner(eb) == root->root_key.objectid &&
- btrfs_comp_cpu_keys(&key, &wc->update_progress) >= 0) {
- wc->stage = UPDATE_BACKREF;
- wc->shared_level = level;
- }
- }
-
if (wc->stage == DROP_REFERENCE) {
if (wc->refs[level] > 1)
return 1;
return 0;
}
+/*
+ * hepler to process tree block pointer.
+ *
+ * when wc->stage == DROP_REFERENCE, this function checks
+ * reference count of the block pointed to. if the block
+ * is shared and we need update back refs for the subtree
+ * rooted at the block, this function changes wc->stage to
+ * UPDATE_BACKREF. if the block is shared and there is no
+ * need to update back, this function drops the reference
+ * to the block.
+ *
+ * NOTE: return value 1 means we should stop walking down.
+ */
+static noinline int do_walk_down(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ struct walk_control *wc)
+{
+ u64 bytenr;
+ u64 generation;
+ u64 parent;
+ u32 blocksize;
+ struct btrfs_key key;
+ struct extent_buffer *next;
+ int level = wc->level;
+ int reada = 0;
+ int ret = 0;
+
+ generation = btrfs_node_ptr_generation(path->nodes[level],
+ path->slots[level]);
+ /*
+ * if the lower level block was created before the snapshot
+ * was created, we know there is no need to update back refs
+ * for the subtree
+ */
+ if (wc->stage == UPDATE_BACKREF &&
+ generation <= root->root_key.offset)
+ return 1;
+
+ bytenr = btrfs_node_blockptr(path->nodes[level], path->slots[level]);
+ blocksize = btrfs_level_size(root, level - 1);
+
+ next = btrfs_find_tree_block(root, bytenr, blocksize);
+ if (!next) {
+ next = btrfs_find_create_tree_block(root, bytenr, blocksize);
+ reada = 1;
+ }
+ btrfs_tree_lock(next);
+ btrfs_set_lock_blocking(next);
+
+ if (wc->stage == DROP_REFERENCE) {
+ ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
+ &wc->refs[level - 1],
+ &wc->flags[level - 1]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level - 1] == 0);
+
+ if (wc->refs[level - 1] > 1) {
+ if (!wc->update_ref ||
+ generation <= root->root_key.offset)
+ goto skip;
+
+ btrfs_node_key_to_cpu(path->nodes[level], &key,
+ path->slots[level]);
+ ret = btrfs_comp_cpu_keys(&key, &wc->update_progress);
+ if (ret < 0)
+ goto skip;
+
+ wc->stage = UPDATE_BACKREF;
+ wc->shared_level = level - 1;
+ }
+ }
+
+ if (!btrfs_buffer_uptodate(next, generation)) {
+ btrfs_tree_unlock(next);
+ free_extent_buffer(next);
+ next = NULL;
+ }
+
+ if (!next) {
+ if (reada && level == 1)
+ reada_walk_down(trans, root, wc, path);
+ next = read_tree_block(root, bytenr, blocksize, generation);
+ btrfs_tree_lock(next);
+ btrfs_set_lock_blocking(next);
+ }
+
+ level--;
+ BUG_ON(level != btrfs_header_level(next));
+ path->nodes[level] = next;
+ path->slots[level] = 0;
+ path->locks[level] = 1;
+ wc->level = level;
+ if (wc->level == 1)
+ wc->reada_slot = 0;
+ return 0;
+skip:
+ wc->refs[level - 1] = 0;
+ wc->flags[level - 1] = 0;
+
+ if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
+ parent = path->nodes[level]->start;
+ } else {
+ BUG_ON(root->root_key.objectid !=
+ btrfs_header_owner(path->nodes[level]));
+ parent = 0;
+ }
+
+ ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent,
+ root->root_key.objectid, level - 1, 0);
+ BUG_ON(ret);
+
+ btrfs_tree_unlock(next);
+ free_extent_buffer(next);
+ return 1;
+}
+
/*
* hepler to process tree block while walking up the tree.
*
if (level < wc->shared_level)
goto out;
- BUG_ON(wc->refs[level] <= 1);
ret = find_next_key(path, level + 1, &wc->update_progress);
if (ret > 0)
wc->update_ref = 0;
path->locks[level] = 0;
return 1;
}
- } else {
- BUG_ON(level != 0);
}
}
struct btrfs_path *path,
struct walk_control *wc)
{
- struct extent_buffer *next;
- struct extent_buffer *cur;
- u64 bytenr;
- u64 ptr_gen;
- u32 blocksize;
int level = wc->level;
int ret;
while (level >= 0) {
- cur = path->nodes[level];
- BUG_ON(path->slots[level] >= btrfs_header_nritems(cur));
+ if (path->slots[level] >=
+ btrfs_header_nritems(path->nodes[level]))
+ break;
ret = walk_down_proc(trans, root, path, wc);
if (ret > 0)
if (level == 0)
break;
- bytenr = btrfs_node_blockptr(cur, path->slots[level]);
- blocksize = btrfs_level_size(root, level - 1);
- ptr_gen = btrfs_node_ptr_generation(cur, path->slots[level]);
-
- next = read_tree_block(root, bytenr, blocksize, ptr_gen);
- btrfs_tree_lock(next);
- btrfs_set_lock_blocking(next);
-
- level--;
- BUG_ON(level != btrfs_header_level(next));
- path->nodes[level] = next;
- path->slots[level] = 0;
- path->locks[level] = 1;
- wc->level = level;
+ ret = do_walk_down(trans, root, path, wc);
+ if (ret > 0) {
+ path->slots[level]++;
+ continue;
+ }
+ level = wc->level;
}
return 0;
}
err = ret;
goto out;
}
- btrfs_node_key_to_cpu(path->nodes[level], &key,
- path->slots[level]);
- WARN_ON(memcmp(&key, &wc->update_progress, sizeof(key)));
+ WARN_ON(ret > 0);
/*
* unlock our path, this is safe because only this
wc->stage = DROP_REFERENCE;
wc->update_ref = update_ref;
wc->keep_locks = 0;
+ wc->reada_count = BTRFS_NODEPTRS_PER_BLOCK(root);
while (1) {
ret = walk_down_tree(trans, root, path, wc);
ret = btrfs_del_root(trans, tree_root, &root->root_key);
BUG_ON(ret);
- free_extent_buffer(root->node);
- free_extent_buffer(root->commit_root);
- kfree(root);
+ if (root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID) {
+ ret = btrfs_find_last_root(tree_root, root->root_key.objectid,
+ NULL, NULL);
+ BUG_ON(ret < 0);
+ if (ret > 0) {
+ ret = btrfs_del_orphan_item(trans, tree_root,
+ root->root_key.objectid);
+ BUG_ON(ret);
+ }
+ }
+
+ if (root->in_radix) {
+ btrfs_free_fs_root(tree_root->fs_info, root);
+ } else {
+ free_extent_buffer(root->node);
+ free_extent_buffer(root->commit_root);
+ kfree(root);
+ }
out:
btrfs_end_transaction(trans, tree_root);
kfree(wc);
wc->stage = DROP_REFERENCE;
wc->update_ref = 0;
wc->keep_locks = 1;
+ wc->reada_count = BTRFS_NODEPTRS_PER_BLOCK(root);
while (1) {
wret = walk_down_tree(trans, root, path, wc);
lock_extent(&BTRFS_I(reloc_inode)->io_tree, start, end, GFP_NOFS);
while (1) {
int ret;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
return 0;
}
-#if 0
-static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 objectid, u64 size)
-{
- struct btrfs_path *path;
- struct btrfs_inode_item *item;
- struct extent_buffer *leaf;
- int ret;
-
- path = btrfs_alloc_path();
- if (!path)
- return -ENOMEM;
-
- path->leave_spinning = 1;
- ret = btrfs_insert_empty_inode(trans, root, path, objectid);
- if (ret)
- goto out;
-
- leaf = path->nodes[0];
- item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item);
- memset_extent_buffer(leaf, 0, (unsigned long)item, sizeof(*item));
- btrfs_set_inode_generation(leaf, item, 1);
- btrfs_set_inode_size(leaf, item, size);
- btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
- btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS);
- btrfs_mark_buffer_dirty(leaf);
- btrfs_release_path(root, path);
-out:
- btrfs_free_path(path);
- return ret;
-}
-
-static noinline struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info,
- struct btrfs_block_group_cache *group)
+/*
+ * checks to see if its even possible to relocate this block group.
+ *
+ * @return - -1 if it's not a good idea to relocate this block group, 0 if its
+ * ok to go ahead and try.
+ */
+int btrfs_can_relocate(struct btrfs_root *root, u64 bytenr)
{
- struct inode *inode = NULL;
- struct btrfs_trans_handle *trans;
- struct btrfs_root *root;
- struct btrfs_key root_key;
- u64 objectid = BTRFS_FIRST_FREE_OBJECTID;
- int err = 0;
+ struct btrfs_block_group_cache *block_group;
+ struct btrfs_space_info *space_info;
+ struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
+ struct btrfs_device *device;
+ int full = 0;
+ int ret = 0;
- root_key.objectid = BTRFS_DATA_RELOC_TREE_OBJECTID;
- root_key.type = BTRFS_ROOT_ITEM_KEY;
- root_key.offset = (u64)-1;
- root = btrfs_read_fs_root_no_name(fs_info, &root_key);
- if (IS_ERR(root))
- return ERR_CAST(root);
+ block_group = btrfs_lookup_block_group(root->fs_info, bytenr);
- trans = btrfs_start_transaction(root, 1);
- BUG_ON(!trans);
+ /* odd, couldn't find the block group, leave it alone */
+ if (!block_group)
+ return -1;
- err = btrfs_find_free_objectid(trans, root, objectid, &objectid);
- if (err)
+ /* no bytes used, we're good */
+ if (!btrfs_block_group_used(&block_group->item))
goto out;
- err = __insert_orphan_inode(trans, root, objectid, group->key.offset);
- BUG_ON(err);
-
- err = btrfs_insert_file_extent(trans, root, objectid, 0, 0, 0,
- group->key.offset, 0, group->key.offset,
- 0, 0, 0);
- BUG_ON(err);
-
- inode = btrfs_iget_locked(root->fs_info->sb, objectid, root);
- if (inode->i_state & I_NEW) {
- BTRFS_I(inode)->root = root;
- BTRFS_I(inode)->location.objectid = objectid;
- BTRFS_I(inode)->location.type = BTRFS_INODE_ITEM_KEY;
- BTRFS_I(inode)->location.offset = 0;
- btrfs_read_locked_inode(inode);
- unlock_new_inode(inode);
- BUG_ON(is_bad_inode(inode));
- } else {
- BUG_ON(1);
- }
- BTRFS_I(inode)->index_cnt = group->key.objectid;
-
- err = btrfs_orphan_add(trans, inode);
-out:
- btrfs_end_transaction(trans, root);
- if (err) {
- if (inode)
- iput(inode);
- inode = ERR_PTR(err);
- }
- return inode;
-}
-
-int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len)
-{
-
- struct btrfs_ordered_sum *sums;
- struct btrfs_sector_sum *sector_sum;
- struct btrfs_ordered_extent *ordered;
- struct btrfs_root *root = BTRFS_I(inode)->root;
- struct list_head list;
- size_t offset;
- int ret;
- u64 disk_bytenr;
-
- INIT_LIST_HEAD(&list);
-
- ordered = btrfs_lookup_ordered_extent(inode, file_pos);
- BUG_ON(ordered->file_offset != file_pos || ordered->len != len);
-
- disk_bytenr = file_pos + BTRFS_I(inode)->index_cnt;
- ret = btrfs_lookup_csums_range(root->fs_info->csum_root, disk_bytenr,
- disk_bytenr + len - 1, &list);
-
- while (!list_empty(&list)) {
- sums = list_entry(list.next, struct btrfs_ordered_sum, list);
- list_del_init(&sums->list);
-
- sector_sum = sums->sums;
- sums->bytenr = ordered->start;
+ space_info = block_group->space_info;
+ spin_lock(&space_info->lock);
- offset = 0;
- while (offset < sums->len) {
- sector_sum->bytenr += ordered->start - disk_bytenr;
- sector_sum++;
- offset += root->sectorsize;
- }
+ full = space_info->full;
- btrfs_add_ordered_sum(inode, ordered, sums);
+ /*
+ * if this is the last block group we have in this space, we can't
+ * relocate it unless we're able to allocate a new chunk below.
+ *
+ * Otherwise, we need to make sure we have room in the space to handle
+ * all of the extents from this block group. If we can, we're good
+ */
+ if ((space_info->total_bytes != block_group->key.offset) &&
+ (space_info->bytes_used + space_info->bytes_reserved +
+ space_info->bytes_pinned + space_info->bytes_readonly +
+ btrfs_block_group_used(&block_group->item) <
+ space_info->total_bytes)) {
+ spin_unlock(&space_info->lock);
+ goto out;
}
- btrfs_put_ordered_extent(ordered);
- return 0;
-}
-
-int btrfs_relocate_block_group(struct btrfs_root *root, u64 group_start)
-{
- struct btrfs_trans_handle *trans;
- struct btrfs_path *path;
- struct btrfs_fs_info *info = root->fs_info;
- struct extent_buffer *leaf;
- struct inode *reloc_inode;
- struct btrfs_block_group_cache *block_group;
- struct btrfs_key key;
- u64 skipped;
- u64 cur_byte;
- u64 total_found;
- u32 nritems;
- int ret;
- int progress;
- int pass = 0;
-
- root = root->fs_info->extent_root;
-
- block_group = btrfs_lookup_block_group(info, group_start);
- BUG_ON(!block_group);
-
- printk(KERN_INFO "btrfs relocating block group %llu flags %llu\n",
- (unsigned long long)block_group->key.objectid,
- (unsigned long long)block_group->flags);
-
- path = btrfs_alloc_path();
- BUG_ON(!path);
-
- reloc_inode = create_reloc_inode(info, block_group);
- BUG_ON(IS_ERR(reloc_inode));
-
- __alloc_chunk_for_shrink(root, block_group, 1);
- set_block_group_readonly(block_group);
-
- btrfs_start_delalloc_inodes(info->tree_root);
- btrfs_wait_ordered_extents(info->tree_root, 0);
-again:
- skipped = 0;
- total_found = 0;
- progress = 0;
- key.objectid = block_group->key.objectid;
- key.offset = 0;
- key.type = 0;
- cur_byte = key.objectid;
-
- trans = btrfs_start_transaction(info->tree_root, 1);
- btrfs_commit_transaction(trans, info->tree_root);
+ spin_unlock(&space_info->lock);
- mutex_lock(&root->fs_info->cleaner_mutex);
- btrfs_clean_old_snapshots(info->tree_root);
- btrfs_remove_leaf_refs(info->tree_root, (u64)-1, 1);
- mutex_unlock(&root->fs_info->cleaner_mutex);
+ /*
+ * ok we don't have enough space, but maybe we have free space on our
+ * devices to allocate new chunks for relocation, so loop through our
+ * alloc devices and guess if we have enough space. However, if we
+ * were marked as full, then we know there aren't enough chunks, and we
+ * can just return.
+ */
+ ret = -1;
+ if (full)
+ goto out;
- trans = btrfs_start_transaction(info->tree_root, 1);
- btrfs_commit_transaction(trans, info->tree_root);
+ mutex_lock(&root->fs_info->chunk_mutex);
+ list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) {
+ u64 min_free = btrfs_block_group_used(&block_group->item);
+ u64 dev_offset, max_avail;
- while (1) {
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (ret < 0)
- goto out;
-next:
- leaf = path->nodes[0];
- nritems = btrfs_header_nritems(leaf);
- if (path->slots[0] >= nritems) {
- ret = btrfs_next_leaf(root, path);
- if (ret < 0)
- goto out;
- if (ret == 1) {
- ret = 0;
+ /*
+ * check to make sure we can actually find a chunk with enough
+ * space to fit our block group in.
+ */
+ if (device->total_bytes > device->bytes_used + min_free) {
+ ret = find_free_dev_extent(NULL, device, min_free,
+ &dev_offset, &max_avail);
+ if (!ret)
break;
- }
- leaf = path->nodes[0];
- nritems = btrfs_header_nritems(leaf);
- }
-
- btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
-
- if (key.objectid >= block_group->key.objectid +
- block_group->key.offset)
- break;
-
- if (progress && need_resched()) {
- btrfs_release_path(root, path);
- cond_resched();
- progress = 0;
- continue;
+ ret = -1;
}
- progress = 1;
-
- if (btrfs_key_type(&key) != BTRFS_EXTENT_ITEM_KEY ||
- key.objectid + key.offset <= cur_byte) {
- path->slots[0]++;
- goto next;
- }
-
- total_found++;
- cur_byte = key.objectid + key.offset;
- btrfs_release_path(root, path);
-
- __alloc_chunk_for_shrink(root, block_group, 0);
- ret = relocate_one_extent(root, path, &key, block_group,
- reloc_inode, pass);
- BUG_ON(ret < 0);
- if (ret > 0)
- skipped++;
-
- key.objectid = cur_byte;
- key.type = 0;
- key.offset = 0;
}
-
- btrfs_release_path(root, path);
-
- if (pass == 0) {
- btrfs_wait_ordered_range(reloc_inode, 0, (u64)-1);
- invalidate_mapping_pages(reloc_inode->i_mapping, 0, -1);
- }
-
- if (total_found > 0) {
- printk(KERN_INFO "btrfs found %llu extents in pass %d\n",
- (unsigned long long)total_found, pass);
- pass++;
- if (total_found == skipped && pass > 2) {
- iput(reloc_inode);
- reloc_inode = create_reloc_inode(info, block_group);
- pass = 0;
- }
- goto again;
- }
-
- /* delete reloc_inode */
- iput(reloc_inode);
-
- /* unpin extents in this range */
- trans = btrfs_start_transaction(info->tree_root, 1);
- btrfs_commit_transaction(trans, info->tree_root);
-
- spin_lock(&block_group->lock);
- WARN_ON(block_group->pinned > 0);
- WARN_ON(block_group->reserved > 0);
- WARN_ON(btrfs_block_group_used(&block_group->item) > 0);
- spin_unlock(&block_group->lock);
- btrfs_put_block_group(block_group);
- ret = 0;
+ mutex_unlock(&root->fs_info->chunk_mutex);
out:
- btrfs_free_path(path);
+ btrfs_put_block_group(block_group);
return ret;
}
-#endif
static int find_first_block_group(struct btrfs_root *root,
struct btrfs_path *path, struct btrfs_key *key)
{
struct btrfs_block_group_cache *block_group;
struct btrfs_space_info *space_info;
+ struct btrfs_caching_control *caching_ctl;
struct rb_node *n;
+ down_write(&info->extent_commit_sem);
+ while (!list_empty(&info->caching_block_groups)) {
+ caching_ctl = list_entry(info->caching_block_groups.next,
+ struct btrfs_caching_control, list);
+ list_del(&caching_ctl->list);
+ put_caching_control(caching_ctl);
+ }
+ up_write(&info->extent_commit_sem);
+
spin_lock(&info->block_group_cache_lock);
while ((n = rb_last(&info->block_group_cache_tree)) != NULL) {
block_group = rb_entry(n, struct btrfs_block_group_cache,
up_write(&block_group->space_info->groups_sem);
if (block_group->cached == BTRFS_CACHE_STARTED)
- wait_event(block_group->caching_q,
- block_group_cache_done(block_group));
+ wait_block_group_cache_done(block_group);
btrfs_remove_free_space_cache(block_group);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
cache->fs_info = info;
- init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
cache->flags = btrfs_block_group_flags(&cache->item);
cache->sectorsize = root->sectorsize;
- remove_sb_from_cache(root, cache);
-
/*
* check for two cases, either we are full, and therefore
* don't need to bother with the caching work since we won't
* time, particularly in the full case.
*/
if (found_key.offset == btrfs_block_group_used(&cache->item)) {
+ exclude_super_stripes(root, cache);
+ cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
+ free_excluded_extents(root, cache);
} else if (btrfs_block_group_used(&cache->item) == 0) {
+ exclude_super_stripes(root, cache);
+ cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
add_new_free_space(cache, root->fs_info,
found_key.objectid,
found_key.objectid +
found_key.offset);
+ free_excluded_extents(root, cache);
}
ret = update_space_info(info, cache->flags, found_key.offset,
&space_info);
BUG_ON(ret);
cache->space_info = space_info;
+ spin_lock(&cache->space_info->lock);
+ cache->space_info->bytes_super += cache->bytes_super;
+ spin_unlock(&cache->space_info->lock);
+
down_write(&space_info->groups_sem);
list_add_tail(&cache->list, &space_info->block_groups);
up_write(&space_info->groups_sem);
atomic_set(&cache->count, 1);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
- init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
cache->flags = type;
btrfs_set_block_group_flags(&cache->item, type);
+ cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
- remove_sb_from_cache(root, cache);
+ exclude_super_stripes(root, cache);
add_new_free_space(cache, root->fs_info, chunk_offset,
chunk_offset + size);
+ free_excluded_extents(root, cache);
+
ret = update_space_info(root->fs_info, cache->flags, size, bytes_used,
&cache->space_info);
BUG_ON(ret);
+
+ spin_lock(&cache->space_info->lock);
+ cache->space_info->bytes_super += cache->bytes_super;
+ spin_unlock(&cache->space_info->lock);
+
down_write(&cache->space_info->groups_sem);
list_add_tail(&cache->list, &cache->space_info->block_groups);
up_write(&cache->space_info->groups_sem);
up_write(&block_group->space_info->groups_sem);
if (block_group->cached == BTRFS_CACHE_STARTED)
- wait_event(block_group->caching_q,
- block_group_cache_done(block_group));
+ wait_block_group_cache_done(block_group);
btrfs_remove_free_space_cache(block_group);
}
if (bits & EXTENT_DIRTY)
tree->dirty_bytes += end - start + 1;
- set_state_cb(tree, state, bits);
- state->state |= bits;
state->start = start;
state->end = end;
+ set_state_cb(tree, state, bits);
+ state->state |= bits;
node = tree_insert(&tree->state, end, &state->rb_node);
if (node) {
struct extent_state *found;
* bits were already set, or zero if none of the bits were already set.
*/
int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int wake, int delete, gfp_t mask)
+ int bits, int wake, int delete,
+ struct extent_state **cached_state,
+ gfp_t mask)
{
struct extent_state *state;
+ struct extent_state *cached;
struct extent_state *prealloc = NULL;
+ struct rb_node *next_node;
struct rb_node *node;
u64 last_end;
int err;
}
spin_lock(&tree->lock);
+ if (cached_state) {
+ cached = *cached_state;
+ *cached_state = NULL;
+ cached_state = NULL;
+ if (cached && cached->tree && cached->start == start) {
+ atomic_dec(&cached->refs);
+ state = cached;
+ goto hit_next;
+ }
+ free_extent_state(cached);
+ }
/*
* this search will find the extents that end after
* our range starts
if (!node)
goto out;
state = rb_entry(node, struct extent_state, rb_node);
+hit_next:
if (state->start > end)
goto out;
WARN_ON(state->end < start);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
- } else {
- start = state->start;
}
goto search_again;
}
if (wake)
wake_up(&state->wq);
+
set |= clear_state_bit(tree, prealloc, bits,
wake, delete);
prealloc = NULL;
goto out;
}
+ if (state->end < end && prealloc && !need_resched())
+ next_node = rb_next(&state->rb_node);
+ else
+ next_node = NULL;
+
set |= clear_state_bit(tree, state, bits, wake, delete);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
+ if (start <= end && next_node) {
+ state = rb_entry(next_node, struct extent_state,
+ rb_node);
+ if (state->start == start)
+ goto hit_next;
+ }
goto search_again;
out:
state->state |= bits;
}
+static void cache_state(struct extent_state *state,
+ struct extent_state **cached_ptr)
+{
+ if (cached_ptr && !(*cached_ptr)) {
+ if (state->state & (EXTENT_IOBITS | EXTENT_BOUNDARY)) {
+ *cached_ptr = state;
+ atomic_inc(&state->refs);
+ }
+ }
+}
+
/*
- * set some bits on a range in the tree. This may require allocations
- * or sleeping, so the gfp mask is used to indicate what is allowed.
+ * set some bits on a range in the tree. This may require allocations or
+ * sleeping, so the gfp mask is used to indicate what is allowed.
*
- * If 'exclusive' == 1, this will fail with -EEXIST if some part of the
- * range already has the desired bits set. The start of the existing
- * range is returned in failed_start in this case.
+ * If any of the exclusive bits are set, this will fail with -EEXIST if some
+ * part of the range already has the desired bits set. The start of the
+ * existing range is returned in failed_start in this case.
*
- * [start, end] is inclusive
- * This takes the tree lock.
+ * [start, end] is inclusive This takes the tree lock.
*/
+
static int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int exclusive, u64 *failed_start,
+ int bits, int exclusive_bits, u64 *failed_start,
+ struct extent_state **cached_state,
gfp_t mask)
{
struct extent_state *state;
struct extent_state *prealloc = NULL;
struct rb_node *node;
int err = 0;
- int set;
u64 last_start;
u64 last_end;
+
again:
if (!prealloc && (mask & __GFP_WAIT)) {
prealloc = alloc_extent_state(mask);
}
spin_lock(&tree->lock);
+ if (cached_state && *cached_state) {
+ state = *cached_state;
+ if (state->start == start && state->tree) {
+ node = &state->rb_node;
+ goto hit_next;
+ }
+ }
/*
* this search will find all the extents that end after
* our range starts.
BUG_ON(err == -EEXIST);
goto out;
}
-
state = rb_entry(node, struct extent_state, rb_node);
+hit_next:
last_start = state->start;
last_end = state->end;
* Just lock what we found and keep going
*/
if (state->start == start && state->end <= end) {
- set = state->state & bits;
- if (set && exclusive) {
+ struct rb_node *next_node;
+ if (state->state & exclusive_bits) {
*failed_start = state->start;
err = -EEXIST;
goto out;
}
+
set_state_bits(tree, state, bits);
+ cache_state(state, cached_state);
merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
+
start = last_end + 1;
+ if (start < end && prealloc && !need_resched()) {
+ next_node = rb_next(node);
+ if (next_node) {
+ state = rb_entry(next_node, struct extent_state,
+ rb_node);
+ if (state->start == start)
+ goto hit_next;
+ }
+ }
goto search_again;
}
* desired bit on it.
*/
if (state->start < start) {
- set = state->state & bits;
- if (exclusive && set) {
+ if (state->state & exclusive_bits) {
*failed_start = start;
err = -EEXIST;
goto out;
goto out;
if (state->end <= end) {
set_state_bits(tree, state, bits);
+ cache_state(state, cached_state);
merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
- } else {
- start = state->start;
}
goto search_again;
}
this_end = last_start - 1;
err = insert_state(tree, prealloc, start, this_end,
bits);
+ cache_state(prealloc, cached_state);
prealloc = NULL;
BUG_ON(err == -EEXIST);
if (err)
* on the first half
*/
if (state->start <= end && state->end > end) {
- set = state->state & bits;
- if (exclusive && set) {
+ if (state->state & exclusive_bits) {
*failed_start = start;
err = -EEXIST;
goto out;
BUG_ON(err == -EEXIST);
set_state_bits(tree, prealloc, bits);
+ cache_state(prealloc, cached_state);
merge_state(tree, prealloc);
prealloc = NULL;
goto out;
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_DIRTY, 0, NULL,
- mask);
-}
-
-int set_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end,
- gfp_t mask)
-{
- return set_extent_bit(tree, start, end, EXTENT_ORDERED, 0, NULL, mask);
+ NULL, mask);
}
int set_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask)
{
return set_extent_bit(tree, start, end, bits, 0, NULL,
- mask);
+ NULL, mask);
}
int clear_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask)
{
- return clear_extent_bit(tree, start, end, bits, 0, 0, mask);
+ return clear_extent_bit(tree, start, end, bits, 0, 0, NULL, mask);
}
int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end,
- EXTENT_DELALLOC | EXTENT_DIRTY,
- 0, NULL, mask);
+ EXTENT_DELALLOC | EXTENT_DIRTY | EXTENT_UPTODATE,
+ 0, NULL, NULL, mask);
}
int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return clear_extent_bit(tree, start, end,
- EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0, mask);
-}
-
-int clear_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end,
- gfp_t mask)
-{
- return clear_extent_bit(tree, start, end, EXTENT_ORDERED, 1, 0, mask);
+ EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0,
+ NULL, mask);
}
int set_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_NEW, 0, NULL,
- mask);
+ NULL, mask);
}
static int clear_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
- return clear_extent_bit(tree, start, end, EXTENT_NEW, 0, 0, mask);
+ return clear_extent_bit(tree, start, end, EXTENT_NEW, 0, 0,
+ NULL, mask);
}
int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, NULL,
- mask);
+ NULL, mask);
}
static int clear_extent_uptodate(struct extent_io_tree *tree, u64 start,
u64 end, gfp_t mask)
{
- return clear_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, 0, mask);
-}
-
-static int set_extent_writeback(struct extent_io_tree *tree, u64 start, u64 end,
- gfp_t mask)
-{
- return set_extent_bit(tree, start, end, EXTENT_WRITEBACK,
- 0, NULL, mask);
-}
-
-static int clear_extent_writeback(struct extent_io_tree *tree, u64 start,
- u64 end, gfp_t mask)
-{
- return clear_extent_bit(tree, start, end, EXTENT_WRITEBACK, 1, 0, mask);
+ return clear_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, 0,
+ NULL, mask);
}
int wait_on_extent_writeback(struct extent_io_tree *tree, u64 start, u64 end)
* either insert or lock state struct between start and end use mask to tell
* us if waiting is desired.
*/
-int lock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask)
+int lock_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, struct extent_state **cached_state, gfp_t mask)
{
int err;
u64 failed_start;
while (1) {
- err = set_extent_bit(tree, start, end, EXTENT_LOCKED, 1,
- &failed_start, mask);
+ err = set_extent_bit(tree, start, end, EXTENT_LOCKED | bits,
+ EXTENT_LOCKED, &failed_start,
+ cached_state, mask);
if (err == -EEXIST && (mask & __GFP_WAIT)) {
wait_extent_bit(tree, failed_start, end, EXTENT_LOCKED);
start = failed_start;
return err;
}
+int lock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask)
+{
+ return lock_extent_bits(tree, start, end, 0, NULL, mask);
+}
+
int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
int err;
u64 failed_start;
- err = set_extent_bit(tree, start, end, EXTENT_LOCKED, 1,
- &failed_start, mask);
+ err = set_extent_bit(tree, start, end, EXTENT_LOCKED, EXTENT_LOCKED,
+ &failed_start, NULL, mask);
if (err == -EEXIST) {
if (failed_start > start)
clear_extent_bit(tree, start, failed_start - 1,
- EXTENT_LOCKED, 1, 0, mask);
+ EXTENT_LOCKED, 1, 0, NULL, mask);
return 0;
}
return 1;
}
+int unlock_extent_cached(struct extent_io_tree *tree, u64 start, u64 end,
+ struct extent_state **cached, gfp_t mask)
+{
+ return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, cached,
+ mask);
+}
+
int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
- return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, mask);
+ return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, NULL,
+ mask);
}
/*
page_cache_release(page);
index++;
}
- set_extent_dirty(tree, start, end, GFP_NOFS);
return 0;
}
page_cache_release(page);
index++;
}
- set_extent_writeback(tree, start, end, GFP_NOFS);
return 0;
}
u64 delalloc_start;
u64 delalloc_end;
u64 found;
+ struct extent_state *cached_state = NULL;
int ret;
int loops = 0;
/* some of the pages are gone, lets avoid looping by
* shortening the size of the delalloc range we're searching
*/
+ free_extent_state(cached_state);
if (!loops) {
unsigned long offset = (*start) & (PAGE_CACHE_SIZE - 1);
max_bytes = PAGE_CACHE_SIZE - offset;
BUG_ON(ret);
/* step three, lock the state bits for the whole range */
- lock_extent(tree, delalloc_start, delalloc_end, GFP_NOFS);
+ lock_extent_bits(tree, delalloc_start, delalloc_end,
+ 0, &cached_state, GFP_NOFS);
/* then test to make sure it is all still delalloc */
ret = test_range_bit(tree, delalloc_start, delalloc_end,
- EXTENT_DELALLOC, 1);
+ EXTENT_DELALLOC, 1, cached_state);
if (!ret) {
- unlock_extent(tree, delalloc_start, delalloc_end, GFP_NOFS);
+ unlock_extent_cached(tree, delalloc_start, delalloc_end,
+ &cached_state, GFP_NOFS);
__unlock_for_delalloc(inode, locked_page,
delalloc_start, delalloc_end);
cond_resched();
goto again;
}
+ free_extent_state(cached_state);
*start = delalloc_start;
*end = delalloc_end;
out_failed:
int clear_unlock,
int clear_delalloc, int clear_dirty,
int set_writeback,
- int end_writeback)
+ int end_writeback,
+ int set_private2)
{
int ret;
struct page *pages[16];
if (clear_delalloc)
clear_bits |= EXTENT_DELALLOC;
- clear_extent_bit(tree, start, end, clear_bits, 1, 0, GFP_NOFS);
- if (!(unlock_pages || clear_dirty || set_writeback || end_writeback))
+ clear_extent_bit(tree, start, end, clear_bits, 1, 0, NULL, GFP_NOFS);
+ if (!(unlock_pages || clear_dirty || set_writeback || end_writeback ||
+ set_private2))
return 0;
while (nr_pages > 0) {
min_t(unsigned long,
nr_pages, ARRAY_SIZE(pages)), pages);
for (i = 0; i < ret; i++) {
+
+ if (set_private2)
+ SetPagePrivate2(pages[i]);
+
if (pages[i] == locked_page) {
page_cache_release(pages[i]);
continue;
* range is found set.
*/
int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int filled)
+ int bits, int filled, struct extent_state *cached)
{
struct extent_state *state = NULL;
struct rb_node *node;
int bitset = 0;
spin_lock(&tree->lock);
- node = tree_search(tree, start);
+ if (cached && cached->tree && cached->start == start)
+ node = &cached->rb_node;
+ else
+ node = tree_search(tree, start);
while (node && start <= end) {
state = rb_entry(node, struct extent_state, rb_node);
bitset = 0;
break;
}
+
+ if (state->end == (u64)-1)
+ break;
+
start = state->end + 1;
if (start > end)
break;
{
u64 start = (u64)page->index << PAGE_CACHE_SHIFT;
u64 end = start + PAGE_CACHE_SIZE - 1;
- if (test_range_bit(tree, start, end, EXTENT_UPTODATE, 1))
+ if (test_range_bit(tree, start, end, EXTENT_UPTODATE, 1, NULL))
SetPageUptodate(page);
return 0;
}
{
u64 start = (u64)page->index << PAGE_CACHE_SHIFT;
u64 end = start + PAGE_CACHE_SIZE - 1;
- if (!test_range_bit(tree, start, end, EXTENT_LOCKED, 0))
+ if (!test_range_bit(tree, start, end, EXTENT_LOCKED, 0, NULL))
unlock_page(page);
return 0;
}
static int check_page_writeback(struct extent_io_tree *tree,
struct page *page)
{
- u64 start = (u64)page->index << PAGE_CACHE_SHIFT;
- u64 end = start + PAGE_CACHE_SIZE - 1;
- if (!test_range_bit(tree, start, end, EXTENT_WRITEBACK, 0))
- end_page_writeback(page);
+ end_page_writeback(page);
return 0;
}
}
if (!uptodate) {
- clear_extent_uptodate(tree, start, end, GFP_ATOMIC);
+ clear_extent_uptodate(tree, start, end, GFP_NOFS);
ClearPageUptodate(page);
SetPageError(page);
}
- clear_extent_writeback(tree, start, end, GFP_ATOMIC);
-
if (whole_page)
end_page_writeback(page);
else
continue;
}
/* the get_extent function already copied into the page */
- if (test_range_bit(tree, cur, cur_end, EXTENT_UPTODATE, 1)) {
+ if (test_range_bit(tree, cur, cur_end,
+ EXTENT_UPTODATE, 1, NULL)) {
check_page_uptodate(tree, page);
unlock_extent(tree, cur, cur + iosize - 1, GFP_NOFS);
cur = cur + iosize;
u64 iosize;
u64 unlock_start;
sector_t sector;
+ struct extent_state *cached_state = NULL;
struct extent_map *em;
struct block_device *bdev;
int ret;
delalloc_end = 0;
page_started = 0;
if (!epd->extent_locked) {
+ u64 delalloc_to_write = 0;
/*
* make sure the wbc mapping index is at least updated
* to this page.
tree->ops->fill_delalloc(inode, page, delalloc_start,
delalloc_end, &page_started,
&nr_written);
+ /*
+ * delalloc_end is already one less than the total
+ * length, so we don't subtract one from
+ * PAGE_CACHE_SIZE
+ */
+ delalloc_to_write += (delalloc_end - delalloc_start +
+ PAGE_CACHE_SIZE) >>
+ PAGE_CACHE_SHIFT;
delalloc_start = delalloc_end + 1;
}
+ if (wbc->nr_to_write < delalloc_to_write) {
+ int thresh = 8192;
+
+ if (delalloc_to_write < thresh * 2)
+ thresh = delalloc_to_write;
+ wbc->nr_to_write = min_t(u64, delalloc_to_write,
+ thresh);
+ }
/* did the fill delalloc function already unlock and start
* the IO?
goto done_unlocked;
}
}
- lock_extent(tree, start, page_end, GFP_NOFS);
-
- unlock_start = start;
-
if (tree->ops && tree->ops->writepage_start_hook) {
ret = tree->ops->writepage_start_hook(page, start,
page_end);
if (ret == -EAGAIN) {
- unlock_extent(tree, start, page_end, GFP_NOFS);
redirty_page_for_writepage(wbc, page);
update_nr_written(page, wbc, nr_written);
unlock_page(page);
update_nr_written(page, wbc, nr_written + 1);
end = page_end;
- if (test_range_bit(tree, start, page_end, EXTENT_DELALLOC, 0))
- printk(KERN_ERR "btrfs delalloc bits after lock_extent\n");
-
if (last_byte <= start) {
- clear_extent_dirty(tree, start, page_end, GFP_NOFS);
- unlock_extent(tree, start, page_end, GFP_NOFS);
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, start,
page_end, NULL, 1);
goto done;
}
- set_extent_uptodate(tree, start, page_end, GFP_NOFS);
blocksize = inode->i_sb->s_blocksize;
while (cur <= end) {
if (cur >= last_byte) {
- clear_extent_dirty(tree, cur, page_end, GFP_NOFS);
- unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, cur,
page_end, NULL, 1);
*/
if (compressed || block_start == EXTENT_MAP_HOLE ||
block_start == EXTENT_MAP_INLINE) {
- clear_extent_dirty(tree, cur,
- cur + iosize - 1, GFP_NOFS);
-
- unlock_extent(tree, unlock_start, cur + iosize - 1,
- GFP_NOFS);
-
/*
* end_io notification does not happen here for
* compressed extents
}
/* leave this out until we have a page_mkwrite call */
if (0 && !test_range_bit(tree, cur, cur + iosize - 1,
- EXTENT_DIRTY, 0)) {
+ EXTENT_DIRTY, 0, NULL)) {
cur = cur + iosize;
pg_offset += iosize;
continue;
}
- clear_extent_dirty(tree, cur, cur + iosize - 1, GFP_NOFS);
if (tree->ops && tree->ops->writepage_io_hook) {
ret = tree->ops->writepage_io_hook(page, cur,
cur + iosize - 1);
set_page_writeback(page);
end_page_writeback(page);
}
- if (unlock_start <= page_end)
- unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
unlock_page(page);
done_unlocked:
+ /* drop our reference on any cached states */
+ free_extent_state(cached_state);
return 0;
}
writepage_t writepage, void *data,
void (*flush_fn)(void *))
{
- struct backing_dev_info *bdi = mapping->backing_dev_info;
int ret = 0;
int done = 0;
+ int nr_to_write_done = 0;
struct pagevec pvec;
int nr_pages;
pgoff_t index;
scanned = 1;
}
retry:
- while (!done && (index <= end) &&
+ while (!done && !nr_to_write_done && (index <= end) &&
(nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
PAGECACHE_TAG_DIRTY, min(end - index,
(pgoff_t)PAGEVEC_SIZE-1) + 1))) {
unlock_page(page);
ret = 0;
}
- if (ret || wbc->nr_to_write <= 0)
- done = 1;
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
+ if (ret)
done = 1;
- }
+
+ /*
+ * the filesystem may choose to bump up nr_to_write.
+ * We have to make sure to honor the new nr_to_write
+ * at any time
+ */
+ nr_to_write_done = wbc->nr_to_write <= 0;
}
pagevec_release(&pvec);
cond_resched();
return 0;
lock_extent(tree, start, end, GFP_NOFS);
- wait_on_extent_writeback(tree, start, end);
+ wait_on_page_writeback(page);
clear_extent_bit(tree, start, end,
EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC,
- 1, 1, GFP_NOFS);
+ 1, 1, NULL, GFP_NOFS);
return 0;
}
!isnew && !PageUptodate(page) &&
(block_off_end > to || block_off_start < from) &&
!test_range_bit(tree, block_start, cur_end,
- EXTENT_UPTODATE, 1)) {
+ EXTENT_UPTODATE, 1, NULL)) {
u64 sector;
u64 extent_offset = block_start - em->start;
size_t iosize;
*/
set_extent_bit(tree, block_start,
block_start + iosize - 1,
- EXTENT_LOCKED, 0, NULL, GFP_NOFS);
+ EXTENT_LOCKED, 0, NULL, NULL, GFP_NOFS);
ret = submit_extent_page(READ, tree, page,
sector, iosize, page_offset, em->bdev,
NULL, 1,
int ret = 1;
if (test_range_bit(tree, start, end,
- EXTENT_IOBITS | EXTENT_ORDERED, 0))
+ EXTENT_IOBITS, 0, NULL))
ret = 0;
else {
if ((mask & GFP_NOFS) == GFP_NOFS)
mask = GFP_NOFS;
- clear_extent_bit(tree, start, end, EXTENT_UPTODATE,
- 1, 1, mask);
+ /*
+ * at this point we can safely clear everything except the
+ * locked bit and the nodatasum bit
+ */
+ clear_extent_bit(tree, start, end,
+ ~(EXTENT_LOCKED | EXTENT_NODATASUM),
+ 0, 0, NULL, mask);
}
return ret;
}
u64 len;
while (start <= end) {
len = end - start + 1;
- spin_lock(&map->lock);
+ write_lock(&map->lock);
em = lookup_extent_mapping(map, start, len);
if (!em || IS_ERR(em)) {
- spin_unlock(&map->lock);
+ write_unlock(&map->lock);
break;
}
if (test_bit(EXTENT_FLAG_PINNED, &em->flags) ||
em->start != start) {
- spin_unlock(&map->lock);
+ write_unlock(&map->lock);
free_extent_map(em);
break;
}
if (!test_range_bit(tree, em->start,
extent_map_end(em) - 1,
- EXTENT_LOCKED | EXTENT_WRITEBACK |
- EXTENT_ORDERED,
- 0)) {
+ EXTENT_LOCKED | EXTENT_WRITEBACK,
+ 0, NULL)) {
remove_extent_mapping(map, em);
/* once for the rb tree */
free_extent_map(em);
}
start = extent_map_end(em);
- spin_unlock(&map->lock);
+ write_unlock(&map->lock);
/* once for us */
free_extent_map(em);
int uptodate;
unsigned long index;
- ret = test_range_bit(tree, start, end, EXTENT_UPTODATE, 1);
+ ret = test_range_bit(tree, start, end, EXTENT_UPTODATE, 1, NULL);
if (ret)
return 1;
while (start <= end) {
return 1;
ret = test_range_bit(tree, eb->start, eb->start + eb->len - 1,
- EXTENT_UPTODATE, 1);
+ EXTENT_UPTODATE, 1, NULL);
if (ret)
return ret;
return 0;
if (test_range_bit(tree, eb->start, eb->start + eb->len - 1,
- EXTENT_UPTODATE, 1)) {
+ EXTENT_UPTODATE, 1, NULL)) {
return 0;
}
#define EXTENT_DEFRAG (1 << 6)
#define EXTENT_DEFRAG_DONE (1 << 7)
#define EXTENT_BUFFER_FILLED (1 << 8)
-#define EXTENT_ORDERED (1 << 9)
-#define EXTENT_ORDERED_METADATA (1 << 10)
-#define EXTENT_BOUNDARY (1 << 11)
-#define EXTENT_NODATASUM (1 << 12)
+#define EXTENT_BOUNDARY (1 << 9)
+#define EXTENT_NODATASUM (1 << 10)
#define EXTENT_IOBITS (EXTENT_LOCKED | EXTENT_WRITEBACK)
/* flags for bio submission */
struct extent_io_tree *tree, struct page *page,
gfp_t mask);
int lock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask);
+int lock_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, struct extent_state **cached, gfp_t mask);
int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask);
int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask);
u64 max_bytes, unsigned long bits);
int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int filled);
+ int bits, int filled, struct extent_state *cached_state);
int clear_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask);
int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int wake, int delete, gfp_t mask);
+ int bits, int wake, int delete, struct extent_state **cached,
+ gfp_t mask);
int set_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask);
int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
int clear_unlock,
int clear_delalloc, int clear_dirty,
int set_writeback,
- int end_writeback);
+ int end_writeback,
+ int set_private2);
#endif
void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask)
{
tree->map.rb_node = NULL;
- spin_lock_init(&tree->lock);
+ rwlock_init(&tree->lock);
}
/**
return 0;
}
+int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len)
+{
+ int ret = 0;
+ struct extent_map *merge = NULL;
+ struct rb_node *rb;
+ struct extent_map *em;
+
+ write_lock(&tree->lock);
+ em = lookup_extent_mapping(tree, start, len);
+
+ WARN_ON(em->start != start || !em);
+
+ if (!em)
+ goto out;
+
+ clear_bit(EXTENT_FLAG_PINNED, &em->flags);
+
+ if (em->start != 0) {
+ rb = rb_prev(&em->rb_node);
+ if (rb)
+ merge = rb_entry(rb, struct extent_map, rb_node);
+ if (rb && mergable_maps(merge, em)) {
+ em->start = merge->start;
+ em->len += merge->len;
+ em->block_len += merge->block_len;
+ em->block_start = merge->block_start;
+ merge->in_tree = 0;
+ rb_erase(&merge->rb_node, &tree->map);
+ free_extent_map(merge);
+ }
+ }
+
+ rb = rb_next(&em->rb_node);
+ if (rb)
+ merge = rb_entry(rb, struct extent_map, rb_node);
+ if (rb && mergable_maps(em, merge)) {
+ em->len += merge->len;
+ em->block_len += merge->len;
+ rb_erase(&merge->rb_node, &tree->map);
+ merge->in_tree = 0;
+ free_extent_map(merge);
+ }
+
+ free_extent_map(em);
+out:
+ write_unlock(&tree->lock);
+ return ret;
+
+}
+
/**
* add_extent_mapping - add new extent map to the extent tree
* @tree: tree to insert new map in
ret = -EEXIST;
goto out;
}
- assert_spin_locked(&tree->lock);
rb = tree_insert(&tree->map, em->start, &em->rb_node);
if (rb) {
ret = -EEXIST;
struct rb_node *next = NULL;
u64 end = range_end(start, len);
- assert_spin_locked(&tree->lock);
rb_node = __tree_search(&tree->map, start, &prev, &next);
if (!rb_node && prev) {
em = rb_entry(prev, struct extent_map, rb_node);
return em;
}
+/**
+ * search_extent_mapping - find a nearby extent map
+ * @tree: tree to lookup in
+ * @start: byte offset to start the search
+ * @len: length of the lookup range
+ *
+ * Find and return the first extent_map struct in @tree that intersects the
+ * [start, len] range.
+ *
+ * If one can't be found, any nearby extent may be returned
+ */
+struct extent_map *search_extent_mapping(struct extent_map_tree *tree,
+ u64 start, u64 len)
+{
+ struct extent_map *em;
+ struct rb_node *rb_node;
+ struct rb_node *prev = NULL;
+ struct rb_node *next = NULL;
+
+ rb_node = __tree_search(&tree->map, start, &prev, &next);
+ if (!rb_node && prev) {
+ em = rb_entry(prev, struct extent_map, rb_node);
+ goto found;
+ }
+ if (!rb_node && next) {
+ em = rb_entry(next, struct extent_map, rb_node);
+ goto found;
+ }
+ if (!rb_node) {
+ em = NULL;
+ goto out;
+ }
+ if (IS_ERR(rb_node)) {
+ em = ERR_PTR(PTR_ERR(rb_node));
+ goto out;
+ }
+ em = rb_entry(rb_node, struct extent_map, rb_node);
+ goto found;
+
+ em = NULL;
+ goto out;
+
+found:
+ atomic_inc(&em->refs);
+out:
+ return em;
+}
+
/**
* remove_extent_mapping - removes an extent_map from the extent tree
* @tree: extent tree to remove from
int ret = 0;
WARN_ON(test_bit(EXTENT_FLAG_PINNED, &em->flags));
- assert_spin_locked(&tree->lock);
rb_erase(&em->rb_node, &tree->map);
em->in_tree = 0;
return ret;
struct extent_map_tree {
struct rb_root map;
- spinlock_t lock;
+ rwlock_t lock;
};
static inline u64 extent_map_end(struct extent_map *em)
void free_extent_map(struct extent_map *em);
int __init extent_map_init(void);
void extent_map_exit(void);
+int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len);
+struct extent_map *search_extent_mapping(struct extent_map_tree *tree,
+ u64 start, u64 len);
#endif
int err = 0;
int i;
struct inode *inode = fdentry(file)->d_inode;
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
- u64 hint_byte;
u64 num_bytes;
u64 start_pos;
u64 end_of_last_block;
root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
end_of_last_block = start_pos + num_bytes - 1;
-
- lock_extent(io_tree, start_pos, end_of_last_block, GFP_NOFS);
- trans = btrfs_join_transaction(root, 1);
- if (!trans) {
- err = -ENOMEM;
- goto out_unlock;
- }
- btrfs_set_trans_block_group(trans, inode);
- hint_byte = 0;
-
- set_extent_uptodate(io_tree, start_pos, end_of_last_block, GFP_NOFS);
-
- /* check for reserved extents on each page, we don't want
- * to reset the delalloc bit on things that already have
- * extents reserved.
- */
btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
for (i = 0; i < num_pages; i++) {
struct page *p = pages[i];
* at this time.
*/
}
- err = btrfs_end_transaction(trans, root);
-out_unlock:
- unlock_extent(io_tree, start_pos, end_of_last_block, GFP_NOFS);
return err;
}
if (!split2)
split2 = alloc_extent_map(GFP_NOFS);
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, len);
if (!em) {
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
break;
}
flags = em->flags;
if (skip_pinned && test_bit(EXTENT_FLAG_PINNED, &em->flags)) {
- spin_unlock(&em_tree->lock);
if (em->start <= start &&
(!testend || em->start + em->len >= start + len)) {
free_extent_map(em);
+ write_unlock(&em_tree->lock);
break;
}
if (start < em->start) {
start = em->start + em->len;
}
free_extent_map(em);
+ write_unlock(&em_tree->lock);
continue;
}
compressed = test_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
free_extent_map(split);
split = NULL;
}
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
/* once for us */
free_extent_map(em);
noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
u64 start, u64 end, u64 locked_end,
- u64 inline_limit, u64 *hint_byte)
+ u64 inline_limit, u64 *hint_byte, int drop_cache)
{
u64 extent_end = 0;
u64 search_start = start;
int ret;
inline_limit = 0;
- btrfs_drop_extent_cache(inode, start, end - 1, 0);
+ if (drop_cache)
+ btrfs_drop_extent_cache(inode, start, end - 1, 0);
path = btrfs_alloc_path();
if (!path)
static void recalculate_thresholds(struct btrfs_block_group_cache *block_group)
{
- u64 max_bytes, possible_bytes;
+ u64 max_bytes;
+ u64 bitmap_bytes;
+ u64 extent_bytes;
/*
* The goal is to keep the total amount of memory used per 1gb of space
max_bytes = MAX_CACHE_BYTES_PER_GIG *
(div64_u64(block_group->key.offset, 1024 * 1024 * 1024));
- possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) +
- (sizeof(struct btrfs_free_space) *
- block_group->extents_thresh);
+ /*
+ * we want to account for 1 more bitmap than what we have so we can make
+ * sure we don't go over our overall goal of MAX_CACHE_BYTES_PER_GIG as
+ * we add more bitmaps.
+ */
+ bitmap_bytes = (block_group->total_bitmaps + 1) * PAGE_CACHE_SIZE;
- if (possible_bytes > max_bytes) {
- int extent_bytes = max_bytes -
- (block_group->total_bitmaps * PAGE_CACHE_SIZE);
+ if (bitmap_bytes >= max_bytes) {
+ block_group->extents_thresh = 0;
+ return;
+ }
- if (extent_bytes <= 0) {
- block_group->extents_thresh = 0;
- return;
- }
+ /*
+ * we want the extent entry threshold to always be at most 1/2 the maxw
+ * bytes we can have, or whatever is less than that.
+ */
+ extent_bytes = max_bytes - bitmap_bytes;
+ extent_bytes = min_t(u64, extent_bytes, div64_u64(max_bytes, 2));
- block_group->extents_thresh = extent_bytes /
- (sizeof(struct btrfs_free_space));
- }
+ block_group->extents_thresh =
+ div64_u64(extent_bytes, (sizeof(struct btrfs_free_space)));
}
static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group,
BUG_ON(block_group->total_bitmaps >= max_bitmaps);
info->offset = offset_to_bitmap(block_group, offset);
+ info->bytes = 0;
link_free_space(block_group, info);
block_group->total_bitmaps++;
ptr = (unsigned long)(ref + 1);
ret = 0;
} else if (ret < 0) {
+ if (ret == -EOVERFLOW)
+ ret = -EMLINK;
goto out;
} else {
ref = btrfs_item_ptr(path->nodes[0], path->slots[0],
ret = btrfs_insert_empty_item(trans, root, path, &key,
sizeof(struct btrfs_inode_item));
- if (ret == 0 && objectid > root->highest_inode)
- root->highest_inode = objectid;
return ret;
}
slot = path->slots[0] - 1;
l = path->nodes[0];
btrfs_item_key_to_cpu(l, &found_key, slot);
- *objectid = found_key.objectid;
+ *objectid = max_t(u64, found_key.objectid,
+ BTRFS_FIRST_FREE_OBJECTID - 1);
} else {
- *objectid = BTRFS_FIRST_FREE_OBJECTID;
+ *objectid = BTRFS_FIRST_FREE_OBJECTID - 1;
}
ret = 0;
error:
return ret;
}
-/*
- * walks the btree of allocated inodes and find a hole.
- */
int btrfs_find_free_objectid(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 dirid, u64 *objectid)
{
- struct btrfs_path *path;
- struct btrfs_key key;
int ret;
- int slot = 0;
- u64 last_ino = 0;
- int start_found;
- struct extent_buffer *l;
- struct btrfs_key search_key;
- u64 search_start = dirid;
-
mutex_lock(&root->objectid_mutex);
- if (root->last_inode_alloc >= BTRFS_FIRST_FREE_OBJECTID &&
- root->last_inode_alloc < BTRFS_LAST_FREE_OBJECTID) {
- *objectid = ++root->last_inode_alloc;
- mutex_unlock(&root->objectid_mutex);
- return 0;
- }
- path = btrfs_alloc_path();
- BUG_ON(!path);
- search_start = max(search_start, (u64)BTRFS_FIRST_FREE_OBJECTID);
- search_key.objectid = search_start;
- search_key.type = 0;
- search_key.offset = 0;
-
- start_found = 0;
- ret = btrfs_search_slot(trans, root, &search_key, path, 0, 0);
- if (ret < 0)
- goto error;
- while (1) {
- l = path->nodes[0];
- slot = path->slots[0];
- if (slot >= btrfs_header_nritems(l)) {
- ret = btrfs_next_leaf(root, path);
- if (ret == 0)
- continue;
- if (ret < 0)
- goto error;
- if (!start_found) {
- *objectid = search_start;
- start_found = 1;
- goto found;
- }
- *objectid = last_ino > search_start ?
- last_ino : search_start;
- goto found;
- }
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid >= search_start) {
- if (start_found) {
- if (last_ino < search_start)
- last_ino = search_start;
- if (key.objectid > last_ino) {
- *objectid = last_ino;
- goto found;
- }
- } else if (key.objectid > search_start) {
- *objectid = search_start;
- goto found;
- }
- }
- if (key.objectid >= BTRFS_LAST_FREE_OBJECTID)
- break;
+ if (unlikely(root->highest_objectid < BTRFS_FIRST_FREE_OBJECTID)) {
+ ret = btrfs_find_highest_inode(root, &root->highest_objectid);
+ if (ret)
+ goto out;
+ }
- start_found = 1;
- last_ino = key.objectid + 1;
- path->slots[0]++;
+ if (unlikely(root->highest_objectid >= BTRFS_LAST_FREE_OBJECTID)) {
+ ret = -ENOSPC;
+ goto out;
}
- BUG_ON(1);
-found:
- btrfs_release_path(root, path);
- btrfs_free_path(path);
- BUG_ON(*objectid < search_start);
- mutex_unlock(&root->objectid_mutex);
- return 0;
-error:
- btrfs_release_path(root, path);
- btrfs_free_path(path);
+
+ *objectid = ++root->highest_objectid;
+ ret = 0;
+out:
mutex_unlock(&root->objectid_mutex);
return ret;
}
}
ret = btrfs_drop_extents(trans, root, inode, start,
- aligned_end, aligned_end, start, &hint_byte);
+ aligned_end, aligned_end, start,
+ &hint_byte, 1);
BUG_ON(ret);
if (isize > actual_end)
inline_len, compressed_size,
compressed_pages);
BUG_ON(ret);
- btrfs_drop_extent_cache(inode, start, aligned_end, 0);
+ btrfs_drop_extent_cache(inode, start, aligned_end - 1, 0);
return 0;
}
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
start, end, NULL, 1, 0,
- 0, 1, 1, 1);
+ 0, 1, 1, 1, 0);
ret = 0;
goto free_pages_out;
}
set_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
while (1) {
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
async_extent->start,
async_extent->start +
async_extent->ram_size - 1,
- NULL, 1, 1, 0, 1, 1, 0);
+ NULL, 1, 1, 0, 1, 1, 0, 0);
ret = btrfs_submit_compressed_write(inode,
async_extent->start,
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
start, end, NULL, 1, 1,
- 1, 1, 1, 1);
+ 1, 1, 1, 1, 0);
*nr_written = *nr_written +
(end - start + PAGE_CACHE_SIZE) / PAGE_CACHE_SIZE;
*page_started = 1;
BUG_ON(disk_num_bytes >
btrfs_super_total_bytes(&root->fs_info->super_copy));
+
+ read_lock(&BTRFS_I(inode)->extent_tree.lock);
+ em = search_extent_mapping(&BTRFS_I(inode)->extent_tree,
+ start, num_bytes);
+ if (em) {
+ alloc_hint = em->block_start;
+ free_extent_map(em);
+ }
+ read_unlock(&BTRFS_I(inode)->extent_tree.lock);
btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
while (disk_num_bytes > 0) {
em = alloc_extent_map(GFP_NOFS);
em->start = start;
em->orig_start = em->start;
-
ram_size = ins.offset;
em->len = ins.offset;
set_bit(EXTENT_FLAG_PINNED, &em->flags);
while (1) {
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
/* we're not doing compressed IO, don't unlock the first
* page (which the caller expects to stay locked), don't
* clear any dirty bits and don't set any writeback bits
+ *
+ * Do set the Private2 bit so we know this page was properly
+ * setup for writepage
*/
extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree,
start, start + ram_size - 1,
locked_page, unlock, 1,
- 1, 0, 0, 0);
+ 1, 0, 0, 0, 1);
disk_num_bytes -= cur_alloc_size;
num_bytes -= cur_alloc_size;
alloc_hint = ins.objectid + ins.offset;
int limit = 10 * 1024 * 1042;
clear_extent_bit(&BTRFS_I(inode)->io_tree, start, end, EXTENT_LOCKED |
- EXTENT_DELALLOC, 1, 0, GFP_NOFS);
+ EXTENT_DELALLOC, 1, 0, NULL, GFP_NOFS);
while (start < end) {
async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
async_cow->inode = inode;
em->bdev = root->fs_info->fs_devices->latest_bdev;
set_bit(EXTENT_FLAG_PINNED, &em->flags);
while (1) {
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree,
cur_offset, cur_offset + num_bytes - 1,
- locked_page, 1, 1, 1, 0, 0, 0);
+ locked_page, 1, 1, 1, 0, 0, 0, 1);
cur_offset = extent_end;
if (cur_offset > end)
break;
lock_extent(&BTRFS_I(inode)->io_tree, page_start, page_end, GFP_NOFS);
/* already ordered? We're done */
- if (test_range_bit(&BTRFS_I(inode)->io_tree, page_start, page_end,
- EXTENT_ORDERED, 0)) {
+ if (PagePrivate2(page))
goto out;
- }
ordered = btrfs_lookup_ordered_extent(inode, page_start);
if (ordered) {
struct inode *inode = page->mapping->host;
struct btrfs_writepage_fixup *fixup;
struct btrfs_root *root = BTRFS_I(inode)->root;
- int ret;
- ret = test_range_bit(&BTRFS_I(inode)->io_tree, start, end,
- EXTENT_ORDERED, 0);
- if (ret)
+ /* this page is properly in the ordered list */
+ if (TestClearPagePrivate2(page))
return 0;
if (PageChecked(page))
BUG_ON(!path);
path->leave_spinning = 1;
+
+ /*
+ * we may be replacing one extent in the tree with another.
+ * The new extent is pinned in the extent map, and we don't want
+ * to drop it from the cache until it is completely in the btree.
+ *
+ * So, tell btrfs_drop_extents to leave this extent in the cache.
+ * the caller is expected to unpin it and allow it to be merged
+ * with the others.
+ */
ret = btrfs_drop_extents(trans, root, inode, file_pos,
file_pos + num_bytes, locked_end,
- file_pos, &hint);
+ file_pos, &hint, 0);
BUG_ON(ret);
ins.objectid = inode->i_ino;
btrfs_mark_buffer_dirty(leaf);
inode_add_bytes(inode, num_bytes);
- btrfs_drop_extent_cache(inode, file_pos, file_pos + num_bytes - 1, 0);
ins.objectid = disk_bytenr;
ins.offset = disk_num_bytes;
ordered_extent->len,
compressed, 0, 0,
BTRFS_FILE_EXTENT_REG);
+ unpin_extent_cache(&BTRFS_I(inode)->extent_tree,
+ ordered_extent->file_offset,
+ ordered_extent->len);
BUG_ON(ret);
}
unlock_extent(io_tree, ordered_extent->file_offset,
static int btrfs_writepage_end_io_hook(struct page *page, u64 start, u64 end,
struct extent_state *state, int uptodate)
{
+ ClearPagePrivate2(page);
return btrfs_finish_ordered_io(page->mapping->host, start, end);
}
failrec->last_mirror = 0;
failrec->bio_flags = 0;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, failrec->len);
if (em->start > start || em->start + em->len < start) {
free_extent_map(em);
em = NULL;
}
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em || IS_ERR(em)) {
kfree(failrec);
return 0;
if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
- test_range_bit(io_tree, start, end, EXTENT_NODATASUM, 1)) {
+ test_range_bit(io_tree, start, end, EXTENT_NODATASUM, 1, NULL)) {
clear_extent_bits(io_tree, start, end, EXTENT_NODATASUM,
GFP_NOFS);
return 0;
return ret;
}
+int btrfs_unlink_subvol(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct inode *dir, u64 objectid,
+ const char *name, int name_len)
+{
+ struct btrfs_path *path;
+ struct extent_buffer *leaf;
+ struct btrfs_dir_item *di;
+ struct btrfs_key key;
+ u64 index;
+ int ret;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ di = btrfs_lookup_dir_item(trans, root, path, dir->i_ino,
+ name, name_len, -1);
+ BUG_ON(!di || IS_ERR(di));
+
+ leaf = path->nodes[0];
+ btrfs_dir_item_key_to_cpu(leaf, di, &key);
+ WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid);
+ ret = btrfs_delete_one_dir_name(trans, root, path, di);
+ BUG_ON(ret);
+ btrfs_release_path(root, path);
+
+ ret = btrfs_del_root_ref(trans, root->fs_info->tree_root,
+ objectid, root->root_key.objectid,
+ dir->i_ino, &index, name, name_len);
+ if (ret < 0) {
+ BUG_ON(ret != -ENOENT);
+ di = btrfs_search_dir_index_item(root, path, dir->i_ino,
+ name, name_len);
+ BUG_ON(!di || IS_ERR(di));
+
+ leaf = path->nodes[0];
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ btrfs_release_path(root, path);
+ index = key.offset;
+ }
+
+ di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino,
+ index, name, name_len, -1);
+ BUG_ON(!di || IS_ERR(di));
+
+ leaf = path->nodes[0];
+ btrfs_dir_item_key_to_cpu(leaf, di, &key);
+ WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid);
+ ret = btrfs_delete_one_dir_name(trans, root, path, di);
+ BUG_ON(ret);
+ btrfs_release_path(root, path);
+
+ btrfs_i_size_write(dir, dir->i_size - name_len * 2);
+ dir->i_mtime = dir->i_ctime = CURRENT_TIME;
+ ret = btrfs_update_inode(trans, root, dir);
+ BUG_ON(ret);
+ dir->i_sb->s_dirt = 1;
+
+ btrfs_free_path(path);
+ return 0;
+}
+
static int btrfs_rmdir(struct inode *dir, struct dentry *dentry)
{
struct inode *inode = dentry->d_inode;
struct btrfs_trans_handle *trans;
unsigned long nr = 0;
- /*
- * the FIRST_FREE_OBJECTID check makes sure we don't try to rmdir
- * the root of a subvolume or snapshot
- */
if (inode->i_size > BTRFS_EMPTY_DIR_SIZE ||
- inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
return -ENOTEMPTY;
- }
trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, dir);
+ if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) {
+ err = btrfs_unlink_subvol(trans, root, dir,
+ BTRFS_I(inode)->location.objectid,
+ dentry->d_name.name,
+ dentry->d_name.len);
+ goto out;
+ }
+
err = btrfs_orphan_add(trans, inode);
if (err)
- goto fail_trans;
+ goto out;
/* now the directory is empty */
err = btrfs_unlink_inode(trans, root, dir, dentry->d_inode,
dentry->d_name.name, dentry->d_name.len);
if (!err)
btrfs_i_size_write(inode, 0);
-
-fail_trans:
+out:
nr = trans->blocks_used;
ret = btrfs_end_transaction_throttle(trans, root);
btrfs_btree_balance_dirty(root, nr);
cur_offset,
cur_offset + hole_size,
block_end,
- cur_offset, &hint_byte);
+ cur_offset, &hint_byte, 1);
if (err)
break;
err = btrfs_insert_file_extent(trans, root,
}
btrfs_wait_ordered_range(inode, 0, (u64)-1);
+ if (inode->i_nlink > 0) {
+ BUG_ON(btrfs_root_refs(&root->root_item) != 0);
+ goto no_delete;
+ }
+
btrfs_i_size_write(inode, 0);
trans = btrfs_join_transaction(root, 1);
* is kind of like crossing a mount point.
*/
static int fixup_tree_root_location(struct btrfs_root *root,
- struct btrfs_key *location,
- struct btrfs_root **sub_root,
- struct dentry *dentry)
+ struct inode *dir,
+ struct dentry *dentry,
+ struct btrfs_key *location,
+ struct btrfs_root **sub_root)
{
- struct btrfs_root_item *ri;
+ struct btrfs_path *path;
+ struct btrfs_root *new_root;
+ struct btrfs_root_ref *ref;
+ struct extent_buffer *leaf;
+ int ret;
+ int err = 0;
- if (btrfs_key_type(location) != BTRFS_ROOT_ITEM_KEY)
- return 0;
- if (location->objectid == BTRFS_ROOT_TREE_OBJECTID)
- return 0;
+ path = btrfs_alloc_path();
+ if (!path) {
+ err = -ENOMEM;
+ goto out;
+ }
- *sub_root = btrfs_read_fs_root(root->fs_info, location,
- dentry->d_name.name,
- dentry->d_name.len);
- if (IS_ERR(*sub_root))
- return PTR_ERR(*sub_root);
+ err = -ENOENT;
+ ret = btrfs_find_root_ref(root->fs_info->tree_root, path,
+ BTRFS_I(dir)->root->root_key.objectid,
+ location->objectid);
+ if (ret) {
+ if (ret < 0)
+ err = ret;
+ goto out;
+ }
- ri = &(*sub_root)->root_item;
- location->objectid = btrfs_root_dirid(ri);
- btrfs_set_key_type(location, BTRFS_INODE_ITEM_KEY);
- location->offset = 0;
+ leaf = path->nodes[0];
+ ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_ref);
+ if (btrfs_root_ref_dirid(leaf, ref) != dir->i_ino ||
+ btrfs_root_ref_name_len(leaf, ref) != dentry->d_name.len)
+ goto out;
- return 0;
+ ret = memcmp_extent_buffer(leaf, dentry->d_name.name,
+ (unsigned long)(ref + 1),
+ dentry->d_name.len);
+ if (ret)
+ goto out;
+
+ btrfs_release_path(root->fs_info->tree_root, path);
+
+ new_root = btrfs_read_fs_root_no_name(root->fs_info, location);
+ if (IS_ERR(new_root)) {
+ err = PTR_ERR(new_root);
+ goto out;
+ }
+
+ if (btrfs_root_refs(&new_root->root_item) == 0) {
+ err = -ENOENT;
+ goto out;
+ }
+
+ *sub_root = new_root;
+ location->objectid = btrfs_root_dirid(&new_root->root_item);
+ location->type = BTRFS_INODE_ITEM_KEY;
+ location->offset = 0;
+ err = 0;
+out:
+ btrfs_free_path(path);
+ return err;
}
static void inode_tree_add(struct inode *inode)
struct btrfs_inode *entry;
struct rb_node **p;
struct rb_node *parent;
-
again:
p = &root->inode_tree.rb_node;
parent = NULL;
+ if (hlist_unhashed(&inode->i_hash))
+ return;
+
spin_lock(&root->inode_lock);
while (*p) {
parent = *p;
static void inode_tree_del(struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
+ int empty = 0;
spin_lock(&root->inode_lock);
if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) {
rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree);
RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
+ empty = RB_EMPTY_ROOT(&root->inode_tree);
}
spin_unlock(&root->inode_lock);
+
+ if (empty && btrfs_root_refs(&root->root_item) == 0) {
+ synchronize_srcu(&root->fs_info->subvol_srcu);
+ spin_lock(&root->inode_lock);
+ empty = RB_EMPTY_ROOT(&root->inode_tree);
+ spin_unlock(&root->inode_lock);
+ if (empty)
+ btrfs_add_dead_root(root);
+ }
+}
+
+int btrfs_invalidate_inodes(struct btrfs_root *root)
+{
+ struct rb_node *node;
+ struct rb_node *prev;
+ struct btrfs_inode *entry;
+ struct inode *inode;
+ u64 objectid = 0;
+
+ WARN_ON(btrfs_root_refs(&root->root_item) != 0);
+
+ spin_lock(&root->inode_lock);
+again:
+ node = root->inode_tree.rb_node;
+ prev = NULL;
+ while (node) {
+ prev = node;
+ entry = rb_entry(node, struct btrfs_inode, rb_node);
+
+ if (objectid < entry->vfs_inode.i_ino)
+ node = node->rb_left;
+ else if (objectid > entry->vfs_inode.i_ino)
+ node = node->rb_right;
+ else
+ break;
+ }
+ if (!node) {
+ while (prev) {
+ entry = rb_entry(prev, struct btrfs_inode, rb_node);
+ if (objectid <= entry->vfs_inode.i_ino) {
+ node = prev;
+ break;
+ }
+ prev = rb_next(prev);
+ }
+ }
+ while (node) {
+ entry = rb_entry(node, struct btrfs_inode, rb_node);
+ objectid = entry->vfs_inode.i_ino + 1;
+ inode = igrab(&entry->vfs_inode);
+ if (inode) {
+ spin_unlock(&root->inode_lock);
+ if (atomic_read(&inode->i_count) > 1)
+ d_prune_aliases(inode);
+ /*
+ * btrfs_drop_inode will remove it from
+ * the inode cache when its usage count
+ * hits zero.
+ */
+ iput(inode);
+ cond_resched();
+ spin_lock(&root->inode_lock);
+ goto again;
+ }
+
+ if (cond_resched_lock(&root->inode_lock))
+ goto again;
+
+ node = rb_next(node);
+ }
+ spin_unlock(&root->inode_lock);
+ return 0;
}
static noinline void init_btrfs_i(struct inode *inode)
return inode;
}
+static struct inode *new_simple_dir(struct super_block *s,
+ struct btrfs_key *key,
+ struct btrfs_root *root)
+{
+ struct inode *inode = new_inode(s);
+
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
+ init_btrfs_i(inode);
+
+ BTRFS_I(inode)->root = root;
+ memcpy(&BTRFS_I(inode)->location, key, sizeof(*key));
+ BTRFS_I(inode)->dummy_inode = 1;
+
+ inode->i_ino = BTRFS_EMPTY_SUBVOL_DIR_OBJECTID;
+ inode->i_op = &simple_dir_inode_operations;
+ inode->i_fop = &simple_dir_operations;
+ inode->i_mode = S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO;
+ inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
+
+ return inode;
+}
+
struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
{
struct inode *inode;
- struct btrfs_inode *bi = BTRFS_I(dir);
- struct btrfs_root *root = bi->root;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
struct btrfs_root *sub_root = root;
struct btrfs_key location;
+ int index;
int ret;
+ dentry->d_op = &btrfs_dentry_operations;
+
if (dentry->d_name.len > BTRFS_NAME_LEN)
return ERR_PTR(-ENAMETOOLONG);
if (ret < 0)
return ERR_PTR(ret);
- inode = NULL;
- if (location.objectid) {
- ret = fixup_tree_root_location(root, &location, &sub_root,
- dentry);
- if (ret < 0)
- return ERR_PTR(ret);
- if (ret > 0)
- return ERR_PTR(-ENOENT);
+ if (location.objectid == 0)
+ return NULL;
+
+ if (location.type == BTRFS_INODE_ITEM_KEY) {
+ inode = btrfs_iget(dir->i_sb, &location, root);
+ return inode;
+ }
+
+ BUG_ON(location.type != BTRFS_ROOT_ITEM_KEY);
+
+ index = srcu_read_lock(&root->fs_info->subvol_srcu);
+ ret = fixup_tree_root_location(root, dir, dentry,
+ &location, &sub_root);
+ if (ret < 0) {
+ if (ret != -ENOENT)
+ inode = ERR_PTR(ret);
+ else
+ inode = new_simple_dir(dir->i_sb, &location, sub_root);
+ } else {
inode = btrfs_iget(dir->i_sb, &location, sub_root);
- if (IS_ERR(inode))
- return ERR_CAST(inode);
}
+ srcu_read_unlock(&root->fs_info->subvol_srcu, index);
+
return inode;
}
+static int btrfs_dentry_delete(struct dentry *dentry)
+{
+ struct btrfs_root *root;
+
+ if (!dentry->d_inode)
+ return 0;
+
+ root = BTRFS_I(dentry->d_inode)->root;
+ if (btrfs_root_refs(&root->root_item) == 0)
+ return 1;
+ return 0;
+}
+
static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry,
struct nameidata *nd)
{
struct inode *inode;
- if (dentry->d_name.len > BTRFS_NAME_LEN)
- return ERR_PTR(-ENAMETOOLONG);
-
inode = btrfs_lookup_dentry(dir, dentry);
if (IS_ERR(inode))
return ERR_CAST(inode);
if (ret != 0)
goto fail;
- if (objectid > root->highest_inode)
- root->highest_inode = objectid;
-
inode->i_uid = current_fsuid();
if (dir && (dir->i_mode & S_ISGID)) {
struct inode *parent_inode, struct inode *inode,
const char *name, int name_len, int add_backref, u64 index)
{
- int ret;
+ int ret = 0;
struct btrfs_key key;
struct btrfs_root *root = BTRFS_I(parent_inode)->root;
- key.objectid = inode->i_ino;
- btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
- key.offset = 0;
+ if (unlikely(inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ memcpy(&key, &BTRFS_I(inode)->root->root_key, sizeof(key));
+ } else {
+ key.objectid = inode->i_ino;
+ btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
+ key.offset = 0;
+ }
+
+ if (unlikely(inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ ret = btrfs_add_root_ref(trans, root->fs_info->tree_root,
+ key.objectid, root->root_key.objectid,
+ parent_inode->i_ino,
+ index, name, name_len);
+ } else if (add_backref) {
+ ret = btrfs_insert_inode_ref(trans, root,
+ name, name_len, inode->i_ino,
+ parent_inode->i_ino, index);
+ }
- ret = btrfs_insert_dir_item(trans, root, name, name_len,
- parent_inode->i_ino,
- &key, btrfs_inode_type(inode),
- index);
if (ret == 0) {
- if (add_backref) {
- ret = btrfs_insert_inode_ref(trans, root,
- name, name_len,
- inode->i_ino,
- parent_inode->i_ino,
- index);
- }
+ ret = btrfs_insert_dir_item(trans, root, name, name_len,
+ parent_inode->i_ino, &key,
+ btrfs_inode_type(inode), index);
+ BUG_ON(ret);
+
btrfs_i_size_write(parent_inode, parent_inode->i_size +
name_len * 2);
parent_inode->i_mtime = parent_inode->i_ctime = CURRENT_TIME;
err = btrfs_add_nondir(trans, dentry, inode, 1, index);
- if (err)
- drop_inode = 1;
-
- btrfs_update_inode_block_group(trans, dir);
- err = btrfs_update_inode(trans, root, inode);
-
- if (err)
+ if (err) {
drop_inode = 1;
+ } else {
+ btrfs_update_inode_block_group(trans, dir);
+ err = btrfs_update_inode(trans, root, inode);
+ BUG_ON(err);
+ btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
+ }
nr = trans->blocks_used;
-
- btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
btrfs_end_transaction_throttle(trans, root);
fail:
if (drop_inode) {
int compressed;
again:
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, len);
if (em)
em->bdev = root->fs_info->fs_devices->latest_bdev;
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (em) {
if (em->start > start || em->start + em->len <= start)
map = kmap(page);
read_extent_buffer(leaf, map + pg_offset, ptr,
copy_size);
+ if (pg_offset + copy_size < PAGE_CACHE_SIZE) {
+ memset(map + pg_offset + copy_size, 0,
+ PAGE_CACHE_SIZE - pg_offset -
+ copy_size);
+ }
kunmap(page);
}
flush_dcache_page(page);
}
err = 0;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
/* it is possible that someone inserted the extent into the tree
* while we had the lock dropped. It is also possible that
err = 0;
}
}
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
out:
if (path)
btrfs_free_path(path);
u64 page_start = page_offset(page);
u64 page_end = page_start + PAGE_CACHE_SIZE - 1;
+
+ /*
+ * we have the page locked, so new writeback can't start,
+ * and the dirty bit won't be cleared while we are here.
+ *
+ * Wait for IO on this page so that we can safely clear
+ * the PagePrivate2 bit and do ordered accounting
+ */
wait_on_page_writeback(page);
+
tree = &BTRFS_I(page->mapping->host)->io_tree;
if (offset) {
btrfs_releasepage(page, GFP_NOFS);
return;
}
-
lock_extent(tree, page_start, page_end, GFP_NOFS);
ordered = btrfs_lookup_ordered_extent(page->mapping->host,
page_offset(page));
*/
clear_extent_bit(tree, page_start, page_end,
EXTENT_DIRTY | EXTENT_DELALLOC |
- EXTENT_LOCKED, 1, 0, GFP_NOFS);
- btrfs_finish_ordered_io(page->mapping->host,
- page_start, page_end);
+ EXTENT_LOCKED, 1, 0, NULL, GFP_NOFS);
+ /*
+ * whoever cleared the private bit is responsible
+ * for the finish_ordered_io
+ */
+ if (TestClearPagePrivate2(page)) {
+ btrfs_finish_ordered_io(page->mapping->host,
+ page_start, page_end);
+ }
btrfs_put_ordered_extent(ordered);
lock_extent(tree, page_start, page_end, GFP_NOFS);
}
clear_extent_bit(tree, page_start, page_end,
- EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
- EXTENT_ORDERED,
- 1, 1, GFP_NOFS);
+ EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC,
+ 1, 1, NULL, GFP_NOFS);
__btrfs_releasepage(page, GFP_NOFS);
ClearPageChecked(page);
}
ClearPageChecked(page);
set_page_dirty(page);
+ SetPageUptodate(page);
BTRFS_I(inode)->last_trans = root->fs_info->generation + 1;
unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
out_unlock:
+ if (!ret)
+ return VM_FAULT_LOCKED;
unlock_page(page);
out:
return ret;
* create a new subvolume directory/inode (helper for the ioctl).
*/
int btrfs_create_subvol_root(struct btrfs_trans_handle *trans,
- struct btrfs_root *new_root, struct dentry *dentry,
+ struct btrfs_root *new_root,
u64 new_dirid, u64 alloc_hint)
{
struct inode *inode;
- int error;
+ int err;
u64 index = 0;
inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid,
inode->i_nlink = 1;
btrfs_i_size_write(inode, 0);
- error = btrfs_update_inode(trans, new_root, inode);
- if (error)
- return error;
+ err = btrfs_update_inode(trans, new_root, inode);
+ BUG_ON(err);
- d_instantiate(dentry, inode);
+ iput(inode);
return 0;
}
kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
}
+void btrfs_drop_inode(struct inode *inode)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+
+ if (inode->i_nlink > 0 && btrfs_root_refs(&root->root_item) == 0)
+ generic_delete_inode(inode);
+ else
+ generic_drop_inode(inode);
+}
+
static void init_once(void *foo)
{
struct btrfs_inode *ei = (struct btrfs_inode *) foo;
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(old_dir)->root;
+ struct btrfs_root *dest = BTRFS_I(new_dir)->root;
struct inode *new_inode = new_dentry->d_inode;
struct inode *old_inode = old_dentry->d_inode;
struct timespec ctime = CURRENT_TIME;
u64 index = 0;
+ u64 root_objectid;
int ret;
- /* we're not allowed to rename between subvolumes */
- if (BTRFS_I(old_inode)->root->root_key.objectid !=
- BTRFS_I(new_dir)->root->root_key.objectid)
+ if (new_dir->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)
+ return -EPERM;
+
+ /* we only allow rename subvolume link between subvolumes */
+ if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID && root != dest)
return -EXDEV;
- if (S_ISDIR(old_inode->i_mode) && new_inode &&
- new_inode->i_size > BTRFS_EMPTY_DIR_SIZE) {
+ if (old_inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID ||
+ (new_inode && new_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID))
return -ENOTEMPTY;
- }
- /* to rename a snapshot or subvolume, we need to juggle the
- * backrefs. This isn't coded yet
- */
- if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
- return -EXDEV;
+ if (S_ISDIR(old_inode->i_mode) && new_inode &&
+ new_inode->i_size > BTRFS_EMPTY_DIR_SIZE)
+ return -ENOTEMPTY;
ret = btrfs_check_metadata_free_space(root);
if (ret)
- goto out_unlock;
+ return ret;
/*
* we're using rename to replace one file with another.
old_inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT)
filemap_flush(old_inode->i_mapping);
+ /* close the racy window with snapshot create/destroy ioctl */
+ if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
+ down_read(&root->fs_info->subvol_sem);
+
trans = btrfs_start_transaction(root, 1);
+ btrfs_set_trans_block_group(trans, new_dir);
+
+ if (dest != root)
+ btrfs_record_root_in_trans(trans, dest);
+ ret = btrfs_set_inode_index(new_dir, &index);
+ if (ret)
+ goto out_fail;
+
+ if (unlikely(old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ /* force full log commit if subvolume involved. */
+ root->fs_info->last_trans_log_full_commit = trans->transid;
+ } else {
+ ret = btrfs_insert_inode_ref(trans, dest,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len,
+ old_inode->i_ino,
+ new_dir->i_ino, index);
+ if (ret)
+ goto out_fail;
+ /*
+ * this is an ugly little race, but the rename is required
+ * to make sure that if we crash, the inode is either at the
+ * old name or the new one. pinning the log transaction lets
+ * us make sure we don't allow a log commit to come in after
+ * we unlink the name but before we add the new name back in.
+ */
+ btrfs_pin_log_trans(root);
+ }
/*
* make sure the inode gets flushed if it is replacing
* something.
btrfs_add_ordered_operation(trans, root, old_inode);
}
- /*
- * this is an ugly little race, but the rename is required to make
- * sure that if we crash, the inode is either at the old name
- * or the new one. pinning the log transaction lets us make sure
- * we don't allow a log commit to come in after we unlink the
- * name but before we add the new name back in.
- */
- btrfs_pin_log_trans(root);
-
- btrfs_set_trans_block_group(trans, new_dir);
-
- btrfs_inc_nlink(old_dentry->d_inode);
old_dir->i_ctime = old_dir->i_mtime = ctime;
new_dir->i_ctime = new_dir->i_mtime = ctime;
old_inode->i_ctime = ctime;
if (old_dentry->d_parent != new_dentry->d_parent)
btrfs_record_unlink_dir(trans, old_dir, old_inode, 1);
- ret = btrfs_unlink_inode(trans, root, old_dir, old_dentry->d_inode,
- old_dentry->d_name.name,
- old_dentry->d_name.len);
- if (ret)
- goto out_fail;
+ if (unlikely(old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ root_objectid = BTRFS_I(old_inode)->root->root_key.objectid;
+ ret = btrfs_unlink_subvol(trans, root, old_dir, root_objectid,
+ old_dentry->d_name.name,
+ old_dentry->d_name.len);
+ } else {
+ btrfs_inc_nlink(old_dentry->d_inode);
+ ret = btrfs_unlink_inode(trans, root, old_dir,
+ old_dentry->d_inode,
+ old_dentry->d_name.name,
+ old_dentry->d_name.len);
+ }
+ BUG_ON(ret);
if (new_inode) {
new_inode->i_ctime = CURRENT_TIME;
- ret = btrfs_unlink_inode(trans, root, new_dir,
- new_dentry->d_inode,
- new_dentry->d_name.name,
- new_dentry->d_name.len);
- if (ret)
- goto out_fail;
+ if (unlikely(new_inode->i_ino ==
+ BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) {
+ root_objectid = BTRFS_I(new_inode)->location.objectid;
+ ret = btrfs_unlink_subvol(trans, dest, new_dir,
+ root_objectid,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len);
+ BUG_ON(new_inode->i_nlink == 0);
+ } else {
+ ret = btrfs_unlink_inode(trans, dest, new_dir,
+ new_dentry->d_inode,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len);
+ }
+ BUG_ON(ret);
if (new_inode->i_nlink == 0) {
ret = btrfs_orphan_add(trans, new_dentry->d_inode);
- if (ret)
- goto out_fail;
+ BUG_ON(ret);
}
-
}
- ret = btrfs_set_inode_index(new_dir, &index);
- if (ret)
- goto out_fail;
- ret = btrfs_add_link(trans, new_dentry->d_parent->d_inode,
- old_inode, new_dentry->d_name.name,
- new_dentry->d_name.len, 1, index);
- if (ret)
- goto out_fail;
+ ret = btrfs_add_link(trans, new_dir, old_inode,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len, 0, index);
+ BUG_ON(ret);
- btrfs_log_new_name(trans, old_inode, old_dir,
- new_dentry->d_parent);
+ if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
+ btrfs_log_new_name(trans, old_inode, old_dir,
+ new_dentry->d_parent);
+ btrfs_end_log_trans(root);
+ }
out_fail:
-
- /* this btrfs_end_log_trans just allows the current
- * log-sub transaction to complete
- */
- btrfs_end_log_trans(root);
btrfs_end_transaction_throttle(trans, root);
-out_unlock:
+
+ if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
+ up_read(&root->fs_info->subvol_sem);
return ret;
}
0, 0, 0,
BTRFS_FILE_EXTENT_PREALLOC);
BUG_ON(ret);
+ btrfs_drop_extent_cache(inode, cur_offset,
+ cur_offset + ins.offset -1, 0);
num_bytes -= ins.offset;
cur_offset += ins.offset;
alloc_hint = ins.objectid + ins.offset;
.lookup = btrfs_lookup,
.permission = btrfs_permission,
};
+
static struct file_operations btrfs_dir_file_operations = {
.llseek = generic_file_llseek,
.read = generic_read_dir,
.invalidatepage = btrfs_invalidatepage,
.releasepage = btrfs_releasepage,
.set_page_dirty = btrfs_set_page_dirty,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations btrfs_symlink_aops = {
.listxattr = btrfs_listxattr,
.removexattr = btrfs_removexattr,
};
+
+struct dentry_operations btrfs_dentry_operations = {
+ .d_delete = btrfs_dentry_delete,
+};
struct btrfs_root_item root_item;
struct btrfs_inode_item *inode_item;
struct extent_buffer *leaf;
- struct btrfs_root *new_root = root;
- struct inode *dir;
+ struct btrfs_root *new_root;
+ struct inode *dir = dentry->d_parent->d_inode;
int ret;
int err;
u64 objectid;
ret = btrfs_check_metadata_free_space(root);
if (ret)
- goto fail_commit;
+ return ret;
trans = btrfs_start_transaction(root, 1);
BUG_ON(!trans);
if (ret)
goto fail;
+ key.offset = (u64)-1;
+ new_root = btrfs_read_fs_root_no_name(root->fs_info, &key);
+ BUG_ON(IS_ERR(new_root));
+
+ btrfs_record_root_in_trans(trans, new_root);
+
+ ret = btrfs_create_subvol_root(trans, new_root, new_dirid,
+ BTRFS_I(dir)->block_group);
/*
* insert the directory item
*/
- key.offset = (u64)-1;
- dir = dentry->d_parent->d_inode;
ret = btrfs_set_inode_index(dir, &index);
BUG_ON(ret);
ret = btrfs_update_inode(trans, root, dir);
BUG_ON(ret);
- /* add the backref first */
ret = btrfs_add_root_ref(trans, root->fs_info->tree_root,
- objectid, BTRFS_ROOT_BACKREF_KEY,
- root->root_key.objectid,
+ objectid, root->root_key.objectid,
dir->i_ino, index, name, namelen);
BUG_ON(ret);
- /* now add the forward ref */
- ret = btrfs_add_root_ref(trans, root->fs_info->tree_root,
- root->root_key.objectid, BTRFS_ROOT_REF_KEY,
- objectid,
- dir->i_ino, index, name, namelen);
-
- BUG_ON(ret);
-
- ret = btrfs_commit_transaction(trans, root);
- if (ret)
- goto fail_commit;
-
- new_root = btrfs_read_fs_root_no_name(root->fs_info, &key);
- BUG_ON(!new_root);
-
- trans = btrfs_start_transaction(new_root, 1);
- BUG_ON(!trans);
-
- ret = btrfs_create_subvol_root(trans, new_root, dentry, new_dirid,
- BTRFS_I(dir)->block_group);
- if (ret)
- goto fail;
-
+ d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry));
fail:
nr = trans->blocks_used;
- err = btrfs_commit_transaction(trans, new_root);
+ err = btrfs_commit_transaction(trans, root);
if (err && !ret)
ret = err;
-fail_commit:
- btrfs_btree_balance_dirty(root, nr);
return ret;
}
* sys_mkdirat and vfs_mkdir, but we only do a single component lookup
* inside this filesystem so it's quite a bit simpler.
*/
-static noinline int btrfs_mksubvol(struct path *parent, char *name,
- int mode, int namelen,
+static noinline int btrfs_mksubvol(struct path *parent,
+ char *name, int namelen,
struct btrfs_root *snap_src)
{
+ struct inode *dir = parent->dentry->d_inode;
struct dentry *dentry;
int error;
- mutex_lock_nested(&parent->dentry->d_inode->i_mutex, I_MUTEX_PARENT);
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
dentry = lookup_one_len(name, parent->dentry, namelen);
error = PTR_ERR(dentry);
if (dentry->d_inode)
goto out_dput;
- if (!IS_POSIXACL(parent->dentry->d_inode))
- mode &= ~current_umask();
-
error = mnt_want_write(parent->mnt);
if (error)
goto out_dput;
- error = btrfs_may_create(parent->dentry->d_inode, dentry);
+ error = btrfs_may_create(dir, dentry);
if (error)
goto out_drop_write;
- /*
- * Actually perform the low-level subvolume creation after all
- * this VFS fuzz.
- *
- * Eventually we want to pass in an inode under which we create this
- * subvolume, but for now all are under the filesystem root.
- *
- * Also we should pass on the mode eventually to allow creating new
- * subvolume with specific mode bits.
- */
+ down_read(&BTRFS_I(dir)->root->fs_info->subvol_sem);
+
+ if (btrfs_root_refs(&BTRFS_I(dir)->root->root_item) == 0)
+ goto out_up_read;
+
if (snap_src) {
- struct dentry *dir = dentry->d_parent;
- struct dentry *test = dir->d_parent;
- struct btrfs_path *path = btrfs_alloc_path();
- int ret;
- u64 test_oid;
- u64 parent_oid = BTRFS_I(dir->d_inode)->root->root_key.objectid;
-
- test_oid = snap_src->root_key.objectid;
-
- ret = btrfs_find_root_ref(snap_src->fs_info->tree_root,
- path, parent_oid, test_oid);
- if (ret == 0)
- goto create;
- btrfs_release_path(snap_src->fs_info->tree_root, path);
-
- /* we need to make sure we aren't creating a directory loop
- * by taking a snapshot of something that has our current
- * subvol in its directory tree. So, this loops through
- * the dentries and checks the forward refs for each subvolume
- * to see if is references the subvolume where we are
- * placing this new snapshot.
- */
- while (1) {
- if (!test ||
- dir == snap_src->fs_info->sb->s_root ||
- test == snap_src->fs_info->sb->s_root ||
- test->d_inode->i_sb != snap_src->fs_info->sb) {
- break;
- }
- if (S_ISLNK(test->d_inode->i_mode)) {
- printk(KERN_INFO "Btrfs symlink in snapshot "
- "path, failed\n");
- error = -EMLINK;
- btrfs_free_path(path);
- goto out_drop_write;
- }
- test_oid =
- BTRFS_I(test->d_inode)->root->root_key.objectid;
- ret = btrfs_find_root_ref(snap_src->fs_info->tree_root,
- path, test_oid, parent_oid);
- if (ret == 0) {
- printk(KERN_INFO "Btrfs snapshot creation "
- "failed, looping\n");
- error = -EMLINK;
- btrfs_free_path(path);
- goto out_drop_write;
- }
- btrfs_release_path(snap_src->fs_info->tree_root, path);
- test = test->d_parent;
- }
-create:
- btrfs_free_path(path);
- error = create_snapshot(snap_src, dentry, name, namelen);
+ error = create_snapshot(snap_src, dentry,
+ name, namelen);
} else {
- error = create_subvol(BTRFS_I(parent->dentry->d_inode)->root,
- dentry, name, namelen);
+ error = create_subvol(BTRFS_I(dir)->root, dentry,
+ name, namelen);
}
- if (error)
- goto out_drop_write;
-
- fsnotify_mkdir(parent->dentry->d_inode, dentry);
+ if (!error)
+ fsnotify_mkdir(dir, dentry);
+out_up_read:
+ up_read(&BTRFS_I(dir)->root->fs_info->subvol_sem);
out_drop_write:
mnt_drop_write(parent->mnt);
out_dput:
dput(dentry);
out_unlock:
- mutex_unlock(&parent->dentry->d_inode->i_mutex);
+ mutex_unlock(&dir->i_mutex);
return error;
}
-
static int btrfs_defrag_file(struct file *file)
{
struct inode *inode = fdentry(file)->d_inode;
clear_page_dirty_for_io(page);
btrfs_set_extent_delalloc(inode, page_start, page_end);
-
- unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
set_page_dirty(page);
+ unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
unlock_page(page);
page_cache_release(page);
balance_dirty_pages_ratelimited_nr(inode->i_mapping, 1);
return 0;
}
-static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
+static noinline int btrfs_ioctl_resize(struct btrfs_root *root,
+ void __user *arg)
{
u64 new_size;
u64 old_size;
{
struct btrfs_root *root = BTRFS_I(fdentry(file)->d_inode)->root;
struct btrfs_ioctl_vol_args *vol_args;
- struct btrfs_dir_item *di;
- struct btrfs_path *path;
struct file *src_file;
- u64 root_dirid;
int namelen;
int ret = 0;
goto out;
}
- path = btrfs_alloc_path();
- if (!path) {
- ret = -ENOMEM;
- goto out;
- }
-
- root_dirid = root->fs_info->sb->s_root->d_inode->i_ino,
- di = btrfs_lookup_dir_item(NULL, root->fs_info->tree_root,
- path, root_dirid,
- vol_args->name, namelen, 0);
- btrfs_free_path(path);
-
- if (di && !IS_ERR(di)) {
- ret = -EEXIST;
- goto out;
- }
-
- if (IS_ERR(di)) {
- ret = PTR_ERR(di);
- goto out;
- }
-
if (subvol) {
- ret = btrfs_mksubvol(&file->f_path, vol_args->name,
- file->f_path.dentry->d_inode->i_mode,
- namelen, NULL);
+ ret = btrfs_mksubvol(&file->f_path, vol_args->name, namelen,
+ NULL);
} else {
struct inode *src_inode;
src_file = fget(vol_args->fd);
fput(src_file);
goto out;
}
- ret = btrfs_mksubvol(&file->f_path, vol_args->name,
- file->f_path.dentry->d_inode->i_mode,
- namelen, BTRFS_I(src_inode)->root);
+ ret = btrfs_mksubvol(&file->f_path, vol_args->name, namelen,
+ BTRFS_I(src_inode)->root);
fput(src_file);
}
-
out:
kfree(vol_args);
return ret;
}
+/*
+ * helper to check if the subvolume references other subvolumes
+ */
+static noinline int may_destroy_subvol(struct btrfs_root *root)
+{
+ struct btrfs_path *path;
+ struct btrfs_key key;
+ int ret;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ key.objectid = root->root_key.objectid;
+ key.type = BTRFS_ROOT_REF_KEY;
+ key.offset = (u64)-1;
+
+ ret = btrfs_search_slot(NULL, root->fs_info->tree_root,
+ &key, path, 0, 0);
+ if (ret < 0)
+ goto out;
+ BUG_ON(ret == 0);
+
+ ret = 0;
+ if (path->slots[0] > 0) {
+ path->slots[0]--;
+ btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+ if (key.objectid == root->root_key.objectid &&
+ key.type == BTRFS_ROOT_REF_KEY)
+ ret = -ENOTEMPTY;
+ }
+out:
+ btrfs_free_path(path);
+ return ret;
+}
+
+static noinline int btrfs_ioctl_snap_destroy(struct file *file,
+ void __user *arg)
+{
+ struct dentry *parent = fdentry(file);
+ struct dentry *dentry;
+ struct inode *dir = parent->d_inode;
+ struct inode *inode;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
+ struct btrfs_root *dest = NULL;
+ struct btrfs_ioctl_vol_args *vol_args;
+ struct btrfs_trans_handle *trans;
+ int namelen;
+ int ret;
+ int err = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
+
+ vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
+ namelen = strlen(vol_args->name);
+ if (strchr(vol_args->name, '/') ||
+ strncmp(vol_args->name, "..", namelen) == 0) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ err = mnt_want_write(file->f_path.mnt);
+ if (err)
+ goto out;
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
+ dentry = lookup_one_len(vol_args->name, parent, namelen);
+ if (IS_ERR(dentry)) {
+ err = PTR_ERR(dentry);
+ goto out_unlock_dir;
+ }
+
+ if (!dentry->d_inode) {
+ err = -ENOENT;
+ goto out_dput;
+ }
+
+ inode = dentry->d_inode;
+ if (inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
+ err = -EINVAL;
+ goto out_dput;
+ }
+
+ dest = BTRFS_I(inode)->root;
+
+ mutex_lock(&inode->i_mutex);
+ err = d_invalidate(dentry);
+ if (err)
+ goto out_unlock;
+
+ down_write(&root->fs_info->subvol_sem);
+
+ err = may_destroy_subvol(dest);
+ if (err)
+ goto out_up_write;
+
+ trans = btrfs_start_transaction(root, 1);
+ ret = btrfs_unlink_subvol(trans, root, dir,
+ dest->root_key.objectid,
+ dentry->d_name.name,
+ dentry->d_name.len);
+ BUG_ON(ret);
+
+ btrfs_record_root_in_trans(trans, dest);
+
+ memset(&dest->root_item.drop_progress, 0,
+ sizeof(dest->root_item.drop_progress));
+ dest->root_item.drop_level = 0;
+ btrfs_set_root_refs(&dest->root_item, 0);
+
+ ret = btrfs_insert_orphan_item(trans,
+ root->fs_info->tree_root,
+ dest->root_key.objectid);
+ BUG_ON(ret);
+
+ ret = btrfs_commit_transaction(trans, root);
+ BUG_ON(ret);
+ inode->i_flags |= S_DEAD;
+out_up_write:
+ up_write(&root->fs_info->subvol_sem);
+out_unlock:
+ mutex_unlock(&inode->i_mutex);
+ if (!err) {
+ btrfs_invalidate_inodes(dest);
+ d_delete(dentry);
+ }
+out_dput:
+ dput(dentry);
+out_unlock_dir:
+ mutex_unlock(&dir->i_mutex);
+ mnt_drop_write(file->f_path.mnt);
+out:
+ kfree(vol_args);
+ return err;
+}
+
static int btrfs_ioctl_defrag(struct file *file)
{
struct inode *inode = fdentry(file)->d_inode;
return ret;
}
-static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
- u64 off, u64 olen, u64 destoff)
+static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
+ u64 off, u64 olen, u64 destoff)
{
struct inode *inode = fdentry(file)->d_inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
/* punch hole in destination first */
btrfs_drop_extents(trans, root, inode, off, off + len,
- off + len, 0, &hint_byte);
+ off + len, 0, &hint_byte, 1);
/* clone data */
key.objectid = src->i_ino;
datao += off - key.offset;
datal -= off - key.offset;
}
- if (key.offset + datao + datal + key.offset >
- off + len)
+ if (key.offset + datao + datal > off + len)
datal = off + len - key.offset - datao;
/* disko == 0 means it's a hole */
if (!disko)
return btrfs_ioctl_snap_create(file, argp, 0);
case BTRFS_IOC_SUBVOL_CREATE:
return btrfs_ioctl_snap_create(file, argp, 1);
+ case BTRFS_IOC_SNAP_DESTROY:
+ return btrfs_ioctl_snap_destroy(file, argp);
case BTRFS_IOC_DEFRAG:
return btrfs_ioctl_defrag(file);
case BTRFS_IOC_RESIZE:
#define BTRFS_IOC_SUBVOL_CREATE _IOW(BTRFS_IOCTL_MAGIC, 14, \
struct btrfs_ioctl_vol_args)
-
+#define BTRFS_IOC_SNAP_DESTROY _IOW(BTRFS_IOCTL_MAGIC, 15, \
+ struct btrfs_ioctl_vol_args)
#endif
*
* len is the length of the extent
*
- * This also sets the EXTENT_ORDERED bit on the range in the inode.
- *
* The tree is given a single reference on the ordered extent that was
* inserted.
*/
entry->start = start;
entry->len = len;
entry->disk_len = disk_len;
+ entry->bytes_left = len;
entry->inode = inode;
if (type != BTRFS_ORDERED_IO_DONE && type != BTRFS_ORDERED_COMPLETE)
set_bit(type, &entry->flags);
&entry->rb_node);
BUG_ON(node);
- set_extent_ordered(&BTRFS_I(inode)->io_tree, file_offset,
- entry_end(entry) - 1, GFP_NOFS);
-
spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
list_add_tail(&entry->root_extent_list,
&BTRFS_I(inode)->root->fs_info->ordered_extents);
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry;
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
int ret;
tree = &BTRFS_I(inode)->ordered_tree;
mutex_lock(&tree->mutex);
- clear_extent_ordered(io_tree, file_offset, file_offset + io_size - 1,
- GFP_NOFS);
node = tree_search(tree, file_offset);
if (!node) {
ret = 1;
goto out;
}
- ret = test_range_bit(io_tree, entry->file_offset,
- entry->file_offset + entry->len - 1,
- EXTENT_ORDERED, 0);
- if (ret == 0)
+ if (io_size > entry->bytes_left) {
+ printk(KERN_CRIT "bad ordered accounting left %llu size %llu\n",
+ (unsigned long long)entry->bytes_left,
+ (unsigned long long)io_size);
+ }
+ entry->bytes_left -= io_size;
+ if (entry->bytes_left == 0)
ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
+ else
+ ret = 1;
out:
mutex_unlock(&tree->mutex);
return ret == 0;
u64 orig_end;
u64 wait_end;
struct btrfs_ordered_extent *ordered;
+ int found;
if (start + len < start) {
orig_end = INT_LIMIT(loff_t);
orig_end >> PAGE_CACHE_SHIFT);
end = orig_end;
+ found = 0;
while (1) {
ordered = btrfs_lookup_first_ordered_extent(inode, end);
if (!ordered)
btrfs_put_ordered_extent(ordered);
break;
}
+ found++;
btrfs_start_ordered_extent(inode, ordered, 1);
end = ordered->file_offset;
btrfs_put_ordered_extent(ordered);
break;
end--;
}
- if (test_range_bit(&BTRFS_I(inode)->io_tree, start, orig_end,
- EXTENT_ORDERED | EXTENT_DELALLOC, 0)) {
+ if (found || test_range_bit(&BTRFS_I(inode)->io_tree, start, orig_end,
+ EXTENT_DELALLOC, 0, NULL)) {
schedule_timeout(1);
goto again;
}
*/
if (test_range_bit(io_tree, disk_i_size,
ordered->file_offset + ordered->len - 1,
- EXTENT_DELALLOC, 0)) {
+ EXTENT_DELALLOC, 0, NULL)) {
goto out;
}
/*
*/
if (i_size_test > entry_end(ordered) &&
!test_range_bit(io_tree, entry_end(ordered), i_size_test - 1,
- EXTENT_DELALLOC, 0)) {
+ EXTENT_DELALLOC, 0, NULL)) {
new_i_size = min_t(u64, i_size_test, i_size_read(inode));
}
BTRFS_I(inode)->disk_i_size = new_i_size;
/* extent length on disk */
u64 disk_len;
+ /* number of bytes that still need writing */
+ u64 bytes_left;
+
/* flags (described above) */
unsigned long flags;
btrfs_free_path(path);
return ret;
}
+
+int btrfs_find_orphan_item(struct btrfs_root *root, u64 offset)
+{
+ struct btrfs_path *path;
+ struct btrfs_key key;
+ int ret;
+
+ key.objectid = BTRFS_ORPHAN_OBJECTID;
+ key.type = BTRFS_ORPHAN_ITEM_KEY;
+ key.offset = offset;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+
+ btrfs_free_path(path);
+ return ret;
+}
int nr;
};
+#define MAX_EXTENTS 128
+
+struct file_extent_cluster {
+ u64 start;
+ u64 end;
+ u64 boundary[MAX_EXTENTS];
+ unsigned int nr;
+};
+
struct reloc_control {
/* block group to relocate */
struct btrfs_block_group_cache *block_group;
struct reloc_control *rc)
{
if (test_range_bit(&rc->processed_blocks, bytenr,
- bytenr + blocksize - 1, EXTENT_DIRTY, 1))
+ bytenr + blocksize - 1, EXTENT_DIRTY, 1, NULL))
return 1;
return 0;
}
}
static noinline_for_stack
-int relocate_inode_pages(struct inode *inode, u64 start, u64 len)
+int setup_extent_mapping(struct inode *inode, u64 start, u64 end,
+ u64 block_start)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+ struct extent_map *em;
+ int ret = 0;
+
+ em = alloc_extent_map(GFP_NOFS);
+ if (!em)
+ return -ENOMEM;
+
+ em->start = start;
+ em->len = end + 1 - start;
+ em->block_len = em->len;
+ em->block_start = block_start;
+ em->bdev = root->fs_info->fs_devices->latest_bdev;
+ set_bit(EXTENT_FLAG_PINNED, &em->flags);
+
+ lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+ while (1) {
+ write_lock(&em_tree->lock);
+ ret = add_extent_mapping(em_tree, em);
+ write_unlock(&em_tree->lock);
+ if (ret != -EEXIST) {
+ free_extent_map(em);
+ break;
+ }
+ btrfs_drop_extent_cache(inode, start, end, 0);
+ }
+ unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+ return ret;
+}
+
+static int relocate_file_extent_cluster(struct inode *inode,
+ struct file_extent_cluster *cluster)
{
u64 page_start;
u64 page_end;
- unsigned long i;
- unsigned long first_index;
+ u64 offset = BTRFS_I(inode)->index_cnt;
+ unsigned long index;
unsigned long last_index;
- unsigned int total_read = 0;
- unsigned int total_dirty = 0;
+ unsigned int dirty_page = 0;
struct page *page;
struct file_ra_state *ra;
- struct btrfs_ordered_extent *ordered;
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+ int nr = 0;
int ret = 0;
+ if (!cluster->nr)
+ return 0;
+
ra = kzalloc(sizeof(*ra), GFP_NOFS);
if (!ra)
return -ENOMEM;
+ index = (cluster->start - offset) >> PAGE_CACHE_SHIFT;
+ last_index = (cluster->end - offset) >> PAGE_CACHE_SHIFT;
+
mutex_lock(&inode->i_mutex);
- first_index = start >> PAGE_CACHE_SHIFT;
- last_index = (start + len - 1) >> PAGE_CACHE_SHIFT;
- /* make sure the dirty trick played by the caller work */
- while (1) {
- ret = invalidate_inode_pages2_range(inode->i_mapping,
- first_index, last_index);
- if (ret != -EBUSY)
- break;
- schedule_timeout(HZ/10);
- }
+ i_size_write(inode, cluster->end + 1 - offset);
+ ret = setup_extent_mapping(inode, cluster->start - offset,
+ cluster->end - offset, cluster->start);
if (ret)
goto out_unlock;
file_ra_state_init(ra, inode->i_mapping);
- for (i = first_index ; i <= last_index; i++) {
- if (total_read % ra->ra_pages == 0) {
- btrfs_force_ra(inode->i_mapping, ra, NULL, i,
- min(last_index, ra->ra_pages + i - 1));
- }
- total_read++;
-again:
- if (((u64)i << PAGE_CACHE_SHIFT) > i_size_read(inode))
- BUG_ON(1);
- page = grab_cache_page(inode->i_mapping, i);
+ WARN_ON(cluster->start != cluster->boundary[0]);
+ while (index <= last_index) {
+ page = find_lock_page(inode->i_mapping, index);
if (!page) {
- ret = -ENOMEM;
- goto out_unlock;
+ page_cache_sync_readahead(inode->i_mapping,
+ ra, NULL, index,
+ last_index + 1 - index);
+ page = grab_cache_page(inode->i_mapping, index);
+ if (!page) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
+ }
+
+ if (PageReadahead(page)) {
+ page_cache_async_readahead(inode->i_mapping,
+ ra, NULL, page, index,
+ last_index + 1 - index);
}
+
if (!PageUptodate(page)) {
btrfs_readpage(NULL, page);
lock_page(page);
goto out_unlock;
}
}
- wait_on_page_writeback(page);
page_start = (u64)page->index << PAGE_CACHE_SHIFT;
page_end = page_start + PAGE_CACHE_SIZE - 1;
- lock_extent(io_tree, page_start, page_end, GFP_NOFS);
-
- ordered = btrfs_lookup_ordered_extent(inode, page_start);
- if (ordered) {
- unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
- unlock_page(page);
- page_cache_release(page);
- btrfs_start_ordered_extent(inode, ordered, 1);
- btrfs_put_ordered_extent(ordered);
- goto again;
- }
+
+ lock_extent(&BTRFS_I(inode)->io_tree,
+ page_start, page_end, GFP_NOFS);
+
set_page_extent_mapped(page);
- if (i == first_index)
- set_extent_bits(io_tree, page_start, page_end,
+ if (nr < cluster->nr &&
+ page_start + offset == cluster->boundary[nr]) {
+ set_extent_bits(&BTRFS_I(inode)->io_tree,
+ page_start, page_end,
EXTENT_BOUNDARY, GFP_NOFS);
+ nr++;
+ }
btrfs_set_extent_delalloc(inode, page_start, page_end);
set_page_dirty(page);
- total_dirty++;
+ dirty_page++;
- unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+ unlock_extent(&BTRFS_I(inode)->io_tree,
+ page_start, page_end, GFP_NOFS);
unlock_page(page);
page_cache_release(page);
+
+ index++;
+ if (nr < cluster->nr &&
+ page_end + 1 + offset == cluster->boundary[nr]) {
+ balance_dirty_pages_ratelimited_nr(inode->i_mapping,
+ dirty_page);
+ dirty_page = 0;
+ }
+ }
+ if (dirty_page) {
+ balance_dirty_pages_ratelimited_nr(inode->i_mapping,
+ dirty_page);
}
+ WARN_ON(nr != cluster->nr);
out_unlock:
mutex_unlock(&inode->i_mutex);
kfree(ra);
- balance_dirty_pages_ratelimited_nr(inode->i_mapping, total_dirty);
return ret;
}
static noinline_for_stack
-int relocate_data_extent(struct inode *inode, struct btrfs_key *extent_key)
+int relocate_data_extent(struct inode *inode, struct btrfs_key *extent_key,
+ struct file_extent_cluster *cluster)
{
- struct btrfs_root *root = BTRFS_I(inode)->root;
- struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
- struct extent_map *em;
- u64 start = extent_key->objectid - BTRFS_I(inode)->index_cnt;
- u64 end = start + extent_key->offset - 1;
-
- em = alloc_extent_map(GFP_NOFS);
- em->start = start;
- em->len = extent_key->offset;
- em->block_len = extent_key->offset;
- em->block_start = extent_key->objectid;
- em->bdev = root->fs_info->fs_devices->latest_bdev;
- set_bit(EXTENT_FLAG_PINNED, &em->flags);
+ int ret;
- /* setup extent map to cheat btrfs_readpage */
- lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
- while (1) {
- int ret;
- spin_lock(&em_tree->lock);
- ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
- if (ret != -EEXIST) {
- free_extent_map(em);
- break;
- }
- btrfs_drop_extent_cache(inode, start, end, 0);
+ if (cluster->nr > 0 && extent_key->objectid != cluster->end + 1) {
+ ret = relocate_file_extent_cluster(inode, cluster);
+ if (ret)
+ return ret;
+ cluster->nr = 0;
}
- unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
- return relocate_inode_pages(inode, start, extent_key->offset);
+ if (!cluster->nr)
+ cluster->start = extent_key->objectid;
+ else
+ BUG_ON(cluster->nr >= MAX_EXTENTS);
+ cluster->end = extent_key->objectid + extent_key->offset - 1;
+ cluster->boundary[cluster->nr] = extent_key->objectid;
+ cluster->nr++;
+
+ if (cluster->nr >= MAX_EXTENTS) {
+ ret = relocate_file_extent_cluster(inode, cluster);
+ if (ret)
+ return ret;
+ cluster->nr = 0;
+ }
+ return 0;
}
#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
return 0;
}
+
static noinline_for_stack int relocate_block_group(struct reloc_control *rc)
{
struct rb_root blocks = RB_ROOT;
struct btrfs_key key;
+ struct file_extent_cluster *cluster;
struct btrfs_trans_handle *trans = NULL;
struct btrfs_path *path;
struct btrfs_extent_item *ei;
int ret;
int err = 0;
+ cluster = kzalloc(sizeof(*cluster), GFP_NOFS);
+ if (!cluster)
+ return -ENOMEM;
+
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
+ rc->extents_found = 0;
+ rc->extents_skipped = 0;
+
rc->search_start = rc->block_group->key.objectid;
clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY,
GFP_NOFS);
}
nr = trans->blocks_used;
- btrfs_end_transaction_throttle(trans, rc->extent_root);
+ btrfs_end_transaction(trans, rc->extent_root);
trans = NULL;
btrfs_btree_balance_dirty(rc->extent_root, nr);
if (rc->stage == MOVE_DATA_EXTENTS &&
(flags & BTRFS_EXTENT_FLAG_DATA)) {
rc->found_file_extent = 1;
- ret = relocate_data_extent(rc->data_inode, &key);
+ ret = relocate_data_extent(rc->data_inode,
+ &key, cluster);
if (ret < 0) {
err = ret;
break;
btrfs_btree_balance_dirty(rc->extent_root, nr);
}
+ if (!err) {
+ ret = relocate_file_extent_cluster(rc->data_inode, cluster);
+ if (ret < 0)
+ err = ret;
+ }
+
+ kfree(cluster);
+
rc->create_reloc_root = 0;
smp_mb();
}
static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 objectid, u64 size)
+ struct btrfs_root *root, u64 objectid)
{
struct btrfs_path *path;
struct btrfs_inode_item *item;
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item);
memset_extent_buffer(leaf, 0, (unsigned long)item, sizeof(*item));
btrfs_set_inode_generation(leaf, item, 1);
- btrfs_set_inode_size(leaf, item, size);
+ btrfs_set_inode_size(leaf, item, 0);
btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS);
btrfs_mark_buffer_dirty(leaf);
if (err)
goto out;
- err = __insert_orphan_inode(trans, root, objectid, group->key.offset);
- BUG_ON(err);
-
- err = btrfs_insert_file_extent(trans, root, objectid, 0, 0, 0,
- group->key.offset, 0, group->key.offset,
- 0, 0, 0);
+ err = __insert_orphan_inode(trans, root, objectid);
BUG_ON(err);
key.objectid = objectid;
btrfs_wait_ordered_extents(fs_info->tree_root, 0);
while (1) {
- mutex_lock(&fs_info->cleaner_mutex);
- btrfs_clean_old_snapshots(fs_info->tree_root);
- mutex_unlock(&fs_info->cleaner_mutex);
-
rc->extents_found = 0;
rc->extents_skipped = 0;
+ mutex_lock(&fs_info->cleaner_mutex);
+
+ btrfs_clean_old_snapshots(fs_info->tree_root);
ret = relocate_block_group(rc);
+
+ mutex_unlock(&fs_info->cleaner_mutex);
if (ret < 0) {
err = ret;
break;
}
}
- filemap_fdatawrite_range(fs_info->btree_inode->i_mapping,
- rc->block_group->key.objectid,
- rc->block_group->key.objectid +
- rc->block_group->key.offset - 1);
+ filemap_write_and_wait_range(fs_info->btree_inode->i_mapping,
+ rc->block_group->key.objectid,
+ rc->block_group->key.objectid +
+ rc->block_group->key.offset - 1);
WARN_ON(rc->block_group->pinned > 0);
WARN_ON(rc->block_group->reserved > 0);
return err;
}
+static noinline_for_stack int mark_garbage_root(struct btrfs_root *root)
+{
+ struct btrfs_trans_handle *trans;
+ int ret;
+
+ trans = btrfs_start_transaction(root->fs_info->tree_root, 1);
+
+ memset(&root->root_item.drop_progress, 0,
+ sizeof(root->root_item.drop_progress));
+ root->root_item.drop_level = 0;
+ btrfs_set_root_refs(&root->root_item, 0);
+ ret = btrfs_update_root(trans, root->fs_info->tree_root,
+ &root->root_key, &root->root_item);
+ BUG_ON(ret);
+
+ ret = btrfs_end_transaction(trans, root->fs_info->tree_root);
+ BUG_ON(ret);
+ return 0;
+}
+
/*
* recover relocation interrupted by system crash.
*
fs_root = read_fs_root(root->fs_info,
reloc_root->root_key.offset);
if (IS_ERR(fs_root)) {
- err = PTR_ERR(fs_root);
- goto out;
+ ret = PTR_ERR(fs_root);
+ if (ret != -ENOENT) {
+ err = ret;
+ goto out;
+ }
+ mark_garbage_root(reloc_root);
}
}
goto out;
BUG_ON(ret == 0);
+ if (path->slots[0] == 0) {
+ ret = 1;
+ goto out;
+ }
l = path->nodes[0];
- BUG_ON(path->slots[0] == 0);
slot = path->slots[0] - 1;
btrfs_item_key_to_cpu(l, &found_key, slot);
- if (found_key.objectid != objectid) {
+ if (found_key.objectid != objectid ||
+ found_key.type != BTRFS_ROOT_ITEM_KEY) {
ret = 1;
goto out;
}
- read_extent_buffer(l, item, btrfs_item_ptr_offset(l, slot),
- sizeof(*item));
- memcpy(key, &found_key, sizeof(found_key));
+ if (item)
+ read_extent_buffer(l, item, btrfs_item_ptr_offset(l, slot),
+ sizeof(*item));
+ if (key)
+ memcpy(key, &found_key, sizeof(found_key));
ret = 0;
out:
btrfs_free_path(path);
return ret;
}
+int btrfs_find_orphan_roots(struct btrfs_root *tree_root)
+{
+ struct extent_buffer *leaf;
+ struct btrfs_path *path;
+ struct btrfs_key key;
+ int err = 0;
+ int ret;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ key.objectid = BTRFS_ORPHAN_OBJECTID;
+ key.type = BTRFS_ORPHAN_ITEM_KEY;
+ key.offset = 0;
+
+ while (1) {
+ ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
+ if (ret < 0) {
+ err = ret;
+ break;
+ }
+
+ leaf = path->nodes[0];
+ if (path->slots[0] >= btrfs_header_nritems(leaf)) {
+ ret = btrfs_next_leaf(tree_root, path);
+ if (ret < 0)
+ err = ret;
+ if (ret != 0)
+ break;
+ leaf = path->nodes[0];
+ }
+
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ btrfs_release_path(tree_root, path);
+
+ if (key.objectid != BTRFS_ORPHAN_OBJECTID ||
+ key.type != BTRFS_ORPHAN_ITEM_KEY)
+ break;
+
+ ret = btrfs_find_dead_roots(tree_root, key.offset);
+ if (ret) {
+ err = ret;
+ break;
+ }
+
+ key.offset++;
+ }
+
+ btrfs_free_path(path);
+ return err;
+}
+
/* drop the root item for 'key' from 'root' */
int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_key *key)
return ret;
}
-#if 0 /* this will get used when snapshot deletion is implemented */
int btrfs_del_root_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *tree_root,
- u64 root_id, u8 type, u64 ref_id)
+ u64 root_id, u64 ref_id, u64 dirid, u64 *sequence,
+ const char *name, int name_len)
+
{
+ struct btrfs_path *path;
+ struct btrfs_root_ref *ref;
+ struct extent_buffer *leaf;
struct btrfs_key key;
+ unsigned long ptr;
+ int err = 0;
int ret;
- struct btrfs_path *path;
path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
key.objectid = root_id;
- key.type = type;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
key.offset = ref_id;
-
+again:
ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
- BUG_ON(ret);
-
- ret = btrfs_del_item(trans, tree_root, path);
- BUG_ON(ret);
+ BUG_ON(ret < 0);
+ if (ret == 0) {
+ leaf = path->nodes[0];
+ ref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_root_ref);
+
+ WARN_ON(btrfs_root_ref_dirid(leaf, ref) != dirid);
+ WARN_ON(btrfs_root_ref_name_len(leaf, ref) != name_len);
+ ptr = (unsigned long)(ref + 1);
+ WARN_ON(memcmp_extent_buffer(leaf, name, ptr, name_len));
+ *sequence = btrfs_root_ref_sequence(leaf, ref);
+
+ ret = btrfs_del_item(trans, tree_root, path);
+ BUG_ON(ret);
+ } else
+ err = -ENOENT;
+
+ if (key.type == BTRFS_ROOT_BACKREF_KEY) {
+ btrfs_release_path(tree_root, path);
+ key.objectid = ref_id;
+ key.type = BTRFS_ROOT_REF_KEY;
+ key.offset = root_id;
+ goto again;
+ }
btrfs_free_path(path);
- return ret;
+ return err;
}
-#endif
int btrfs_find_root_ref(struct btrfs_root *tree_root,
struct btrfs_path *path,
return ret;
}
-
/*
* add a btrfs_root_ref item. type is either BTRFS_ROOT_REF_KEY
* or BTRFS_ROOT_BACKREF_KEY.
*/
int btrfs_add_root_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *tree_root,
- u64 root_id, u8 type, u64 ref_id,
- u64 dirid, u64 sequence,
+ u64 root_id, u64 ref_id, u64 dirid, u64 sequence,
const char *name, int name_len)
{
struct btrfs_key key;
struct extent_buffer *leaf;
unsigned long ptr;
-
path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
key.objectid = root_id;
- key.type = type;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
key.offset = ref_id;
-
+again:
ret = btrfs_insert_empty_item(trans, tree_root, path, &key,
sizeof(*ref) + name_len);
BUG_ON(ret);
write_extent_buffer(leaf, name, ptr, name_len);
btrfs_mark_buffer_dirty(leaf);
+ if (key.type == BTRFS_ROOT_BACKREF_KEY) {
+ btrfs_release_path(tree_root, path);
+ key.objectid = ref_id;
+ key.type = BTRFS_ROOT_REF_KEY;
+ key.offset = root_id;
+ goto again;
+ }
+
btrfs_free_path(path);
- return ret;
+ return 0;
}
}
static const struct super_operations btrfs_super_ops = {
+ .drop_inode = btrfs_drop_inode,
.delete_inode = btrfs_delete_inode,
.put_super = btrfs_put_super,
.sync_fs = btrfs_sync_fs,
{
if (root->ref_cows && root->last_trans < trans->transid) {
WARN_ON(root == root->fs_info->extent_root);
- WARN_ON(root->root_item.refs == 0);
WARN_ON(root->commit_root != root->node);
radix_tree_tag_set(&root->fs_info->fs_roots_radix,
memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
key.objectid = objectid;
- key.offset = 0;
+ /* record when the snapshot was created in key.offset */
+ key.offset = trans->transid;
btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
old = btrfs_lock_root_node(root);
ret = btrfs_update_inode(trans, parent_root, parent_inode);
BUG_ON(ret);
- /* add the backref first */
ret = btrfs_add_root_ref(trans, parent_root->fs_info->tree_root,
pending->root_key.objectid,
- BTRFS_ROOT_BACKREF_KEY,
parent_root->root_key.objectid,
parent_inode->i_ino, index, pending->name,
namelen);
BUG_ON(ret);
- /* now add the forward ref */
- ret = btrfs_add_root_ref(trans, parent_root->fs_info->tree_root,
- parent_root->root_key.objectid,
- BTRFS_ROOT_REF_KEY,
- pending->root_key.objectid,
- parent_inode->i_ino, index, pending->name,
- namelen);
-
inode = btrfs_lookup_dentry(parent_inode, pending->dentry);
d_instantiate(pending->dentry, inode);
fail:
unsigned long timeout = 1;
struct btrfs_transaction *cur_trans;
struct btrfs_transaction *prev_trans = NULL;
- struct extent_io_tree *pinned_copy;
DEFINE_WAIT(wait);
int ret;
int should_grow = 0;
return 0;
}
- pinned_copy = kmalloc(sizeof(*pinned_copy), GFP_NOFS);
- if (!pinned_copy)
- return -ENOMEM;
-
- extent_io_tree_init(pinned_copy,
- root->fs_info->btree_inode->i_mapping, GFP_NOFS);
-
trans->transaction->in_commit = 1;
trans->transaction->blocked = 1;
if (cur_trans->list.prev != &root->fs_info->trans_list) {
ret = commit_cowonly_roots(trans, root);
BUG_ON(ret);
+ btrfs_prepare_extent_commit(trans, root);
+
cur_trans = root->fs_info->running_transaction;
spin_lock(&root->fs_info->new_trans_lock);
root->fs_info->running_transaction = NULL;
memcpy(&root->fs_info->super_for_commit, &root->fs_info->super_copy,
sizeof(root->fs_info->super_copy));
- btrfs_copy_pinned(root, pinned_copy);
-
trans->transaction->blocked = 0;
wake_up(&root->fs_info->transaction_wait);
*/
mutex_unlock(&root->fs_info->tree_log_mutex);
- btrfs_finish_extent_commit(trans, root, pinned_copy);
- kfree(pinned_copy);
+ btrfs_finish_extent_commit(trans, root);
/* do the directory inserts of any pending snapshot creations */
finish_pending_snapshots(trans, root->fs_info);
while (!list_empty(&list)) {
root = list_entry(list.next, struct btrfs_root, root_list);
- list_del_init(&root->root_list);
- btrfs_drop_snapshot(root, 0);
+ list_del(&root->root_list);
+
+ if (btrfs_header_backref_rev(root->node) <
+ BTRFS_MIXED_BACKREF_REV)
+ btrfs_drop_snapshot(root, 0);
+ else
+ btrfs_drop_snapshot(root, 1);
}
return 0;
}
struct walk_control *wc, u64 gen)
{
if (wc->pin)
- btrfs_update_pinned_extents(log->fs_info->extent_root,
- eb->start, eb->len, 1);
+ btrfs_pin_extent(log->fs_info->extent_root,
+ eb->start, eb->len, 0);
if (btrfs_buffer_uptodate(eb, gen)) {
if (wc->write)
saved_nbytes = inode_get_bytes(inode);
/* drop any overlapping extents */
ret = btrfs_drop_extents(trans, root, inode,
- start, extent_end, extent_end, start, &alloc_hint);
+ start, extent_end, extent_end, start, &alloc_hint, 1);
BUG_ON(ret);
if (found_type == BTRFS_FILE_EXTENT_REG ||
if (!parent || !parent->d_inode || sb != parent->d_inode->i_sb)
break;
- if (parent == sb->s_root)
+ if (IS_ROOT(parent))
break;
parent = parent->d_parent;
goto end_no_trans;
}
+ if (root != BTRFS_I(inode)->root ||
+ btrfs_root_refs(&root->root_item) == 0) {
+ ret = 1;
+ goto end_no_trans;
+ }
+
ret = check_parent_dirs_for_sync(trans, inode, parent,
sb, last_committed);
if (ret)
break;
inode = parent->d_inode;
+ if (root != BTRFS_I(inode)->root)
+ break;
+
if (BTRFS_I(inode)->generation >
root->fs_info->last_trans_committed) {
ret = btrfs_log_inode(trans, root, inode, inode_only);
BUG_ON(ret);
}
- if (parent == sb->s_root)
+ if (IS_ROOT(parent))
break;
parent = parent->d_parent;
struct btrfs_key tmp_key;
struct btrfs_root *log;
struct btrfs_fs_info *fs_info = log_root_tree->fs_info;
- u64 highest_inode;
struct walk_control wc = {
.process_func = process_one_buffer,
.stage = 0,
path);
BUG_ON(ret);
}
- ret = btrfs_find_highest_inode(wc.replay_dest, &highest_inode);
- if (ret == 0) {
- wc.replay_dest->highest_inode = highest_inode;
- wc.replay_dest->last_inode_alloc = highest_inode;
- }
key.offset = found_key.offset - 1;
wc.replay_dest->log_root = NULL;
* is now congested. Back off and let other work structs
* run instead
*/
- if (pending && bdi_write_congested(bdi) && batch_run > 32 &&
+ if (pending && bdi_write_congested(bdi) && batch_run > 8 &&
fs_info->fs_devices->open_devices > 1) {
struct io_context *ioc;
* called very infrequently and that a given device has a small number
* of extents
*/
-static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
- struct btrfs_device *device,
- u64 num_bytes, u64 *start,
- u64 *max_avail)
+int find_free_dev_extent(struct btrfs_trans_handle *trans,
+ struct btrfs_device *device, u64 num_bytes,
+ u64 *start, u64 *max_avail)
{
struct btrfs_key key;
struct btrfs_root *root = device->dev_root;
extent_root = root->fs_info->extent_root;
em_tree = &root->fs_info->mapping_tree.map_tree;
+ ret = btrfs_can_relocate(extent_root, chunk_offset);
+ if (ret)
+ return -ENOSPC;
+
/* step one, relocate all the extents inside this chunk */
ret = btrfs_relocate_block_group(extent_root, chunk_offset);
BUG_ON(ret);
* step two, delete the device extents and the
* chunk tree entries
*/
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, chunk_offset, 1);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
BUG_ON(em->start > chunk_offset ||
em->start + em->len < chunk_offset);
ret = btrfs_remove_block_group(trans, extent_root, chunk_offset);
BUG_ON(ret);
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
remove_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
kfree(map);
em->bdev = NULL;
struct btrfs_key found_key;
u64 chunk_tree = chunk_root->root_key.objectid;
u64 chunk_type;
+ bool retried = false;
+ int failed = 0;
int ret;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
+again:
key.objectid = BTRFS_FIRST_CHUNK_TREE_OBJECTID;
key.offset = (u64)-1;
key.type = BTRFS_CHUNK_ITEM_KEY;
ret = btrfs_relocate_chunk(chunk_root, chunk_tree,
found_key.objectid,
found_key.offset);
- BUG_ON(ret);
+ if (ret == -ENOSPC)
+ failed++;
+ else if (ret)
+ BUG();
}
if (found_key.offset == 0)
key.offset = found_key.offset - 1;
}
ret = 0;
+ if (failed && !retried) {
+ failed = 0;
+ retried = true;
+ goto again;
+ } else if (failed && retried) {
+ WARN_ON(1);
+ ret = -ENOSPC;
+ }
error:
btrfs_free_path(path);
return ret;
continue;
ret = btrfs_shrink_device(device, old_size - size_to_free);
+ if (ret == -ENOSPC)
+ break;
BUG_ON(ret);
trans = btrfs_start_transaction(dev_root, 1);
chunk = btrfs_item_ptr(path->nodes[0],
path->slots[0],
struct btrfs_chunk);
- key.offset = found_key.offset;
/* chunk zero is special */
- if (key.offset == 0)
+ if (found_key.offset == 0)
break;
btrfs_release_path(chunk_root, path);
chunk_root->root_key.objectid,
found_key.objectid,
found_key.offset);
- BUG_ON(ret);
+ BUG_ON(ret && ret != -ENOSPC);
+ key.offset = found_key.offset - 1;
}
ret = 0;
error:
u64 chunk_offset;
int ret;
int slot;
+ int failed = 0;
+ bool retried = false;
struct extent_buffer *l;
struct btrfs_key key;
struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
u64 old_total = btrfs_super_total_bytes(super_copy);
+ u64 old_size = device->total_bytes;
u64 diff = device->total_bytes - new_size;
if (new_size >= device->total_bytes)
if (!path)
return -ENOMEM;
- trans = btrfs_start_transaction(root, 1);
- if (!trans) {
- ret = -ENOMEM;
- goto done;
- }
-
path->reada = 2;
lock_chunks(root);
if (device->writeable)
device->fs_devices->total_rw_bytes -= diff;
unlock_chunks(root);
- btrfs_end_transaction(trans, root);
+again:
key.objectid = device->devid;
key.offset = (u64)-1;
key.type = BTRFS_DEV_EXTENT_KEY;
goto done;
if (ret) {
ret = 0;
+ btrfs_release_path(root, path);
break;
}
slot = path->slots[0];
btrfs_item_key_to_cpu(l, &key, path->slots[0]);
- if (key.objectid != device->devid)
+ if (key.objectid != device->devid) {
+ btrfs_release_path(root, path);
break;
+ }
dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
length = btrfs_dev_extent_length(l, dev_extent);
- if (key.offset + length <= new_size)
+ if (key.offset + length <= new_size) {
+ btrfs_release_path(root, path);
break;
+ }
chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent);
chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent);
ret = btrfs_relocate_chunk(root, chunk_tree, chunk_objectid,
chunk_offset);
- if (ret)
+ if (ret && ret != -ENOSPC)
goto done;
+ if (ret == -ENOSPC)
+ failed++;
+ key.offset -= 1;
+ }
+
+ if (failed && !retried) {
+ failed = 0;
+ retried = true;
+ goto again;
+ } else if (failed && retried) {
+ ret = -ENOSPC;
+ lock_chunks(root);
+
+ device->total_bytes = old_size;
+ if (device->writeable)
+ device->fs_devices->total_rw_bytes += diff;
+ unlock_chunks(root);
+ goto done;
}
/* Shrinking succeeded, else we would be at "done". */
em->block_len = em->len;
em_tree = &extent_root->fs_info->mapping_tree.map_tree;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
BUG_ON(ret);
free_extent_map(em);
int readonly = 0;
int i;
- spin_lock(&map_tree->map_tree.lock);
+ read_lock(&map_tree->map_tree.lock);
em = lookup_extent_mapping(&map_tree->map_tree, chunk_offset, 1);
- spin_unlock(&map_tree->map_tree.lock);
+ read_unlock(&map_tree->map_tree.lock);
if (!em)
return 1;
struct extent_map *em;
while (1) {
- spin_lock(&tree->map_tree.lock);
+ write_lock(&tree->map_tree.lock);
em = lookup_extent_mapping(&tree->map_tree, 0, (u64)-1);
if (em)
remove_extent_mapping(&tree->map_tree, em);
- spin_unlock(&tree->map_tree.lock);
+ write_unlock(&tree->map_tree.lock);
if (!em)
break;
kfree(em->bdev);
struct extent_map_tree *em_tree = &map_tree->map_tree;
int ret;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, logical, len);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
BUG_ON(!em);
BUG_ON(em->start > logical || em->start + em->len < logical);
atomic_set(&multi->error, 0);
}
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, logical, *length);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em && unplug_page)
return 0;
u64 stripe_nr;
int i, j, nr = 0;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, chunk_start, 1);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
BUG_ON(!em || em->start != chunk_start);
map = (struct map_lookup *)em->bdev;
logical = key->offset;
length = btrfs_chunk_length(leaf, chunk);
- spin_lock(&map_tree->map_tree.lock);
+ read_lock(&map_tree->map_tree.lock);
em = lookup_extent_mapping(&map_tree->map_tree, logical, 1);
- spin_unlock(&map_tree->map_tree.lock);
+ read_unlock(&map_tree->map_tree.lock);
/* already mapped? */
if (em && em->start <= logical && em->start + em->len > logical) {
map->stripes[i].dev->in_fs_metadata = 1;
}
- spin_lock(&map_tree->map_tree.lock);
+ write_lock(&map_tree->map_tree.lock);
ret = add_extent_mapping(&map_tree->map_tree, em);
- spin_unlock(&map_tree->map_tree.lock);
+ write_unlock(&map_tree->map_tree.lock);
BUG_ON(ret);
free_extent_map(em);
void btrfs_unlock_volumes(void);
void btrfs_lock_volumes(void);
int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset);
+int find_free_dev_extent(struct btrfs_trans_handle *trans,
+ struct btrfs_device *device, u64 num_bytes,
+ u64 *start, u64 *max_avail);
#endif
EXPORT_SYMBOL(invalidate_bdev);
/*
- * Kick pdflush then try to free up some ZONE_NORMAL memory.
+ * Kick the writeback threads then try to free up some ZONE_NORMAL memory.
*/
static void free_more_memory(void)
{
/*
* If it's a fully non-blocking write attempt and we cannot
* lock the buffer then redirty the page. Note that this can
- * potentially cause a busy-wait loop from pdflush and kswapd
- * activity, but those code paths have their own higher-level
- * throttling.
+ * potentially cause a busy-wait loop from writeback threads
+ * and kswapd activity, but those code paths have their own
+ * higher-level throttling.
*/
if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
lock_buffer(bh);
struct address_space *mapping = inode->i_mapping;
struct page *page;
void *fsdata;
- unsigned long limit;
int err;
- err = -EFBIG;
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && size > (loff_t)limit) {
- send_sig(SIGXFSZ, current, 0);
- goto out;
- }
- if (size > inode->i_sb->s_maxbytes)
+ err = inode_newsize_ok(inode, size);
+ if (err)
goto out;
err = pagecache_write_begin(NULL, mapping, size, 0,
* still running obsolete flush daemons, so we terminate them here.
*
* Use of bdflush() is deprecated and will be removed in a future kernel.
- * The `pdflush' kernel threads fully replace bdflush daemons and this call.
+ * The `flush-X' kernel threads fully replace bdflush daemons and this call.
*/
SYSCALL_DEFINE2(bdflush, int, func, long, data)
{
{
struct char_device_struct *cd;
struct cdev *cdev;
- char *s;
int err = -ENOMEM;
cd = __register_chrdev_region(major, baseminor, count, name);
cdev->owner = fops->owner;
cdev->ops = fops;
kobject_set_name(&cdev->kobj, "%s", name);
- for (s = strchr(kobject_name(&cdev->kobj),'/'); s; s = strchr(s, '/'))
- *s = '!';
err = cdev_add(cdev, MKDEV(cd->major, baseminor), count);
if (err)
tristate "CIFS support (advanced network filesystem, SMBFS successor)"
depends on INET
select NLS
+ select SLOW_WORK
help
This is the client VFS module for the Common Internet File System
(CIFS) protocol which is the successor to the Server Message Block
unsigned int extended_security = CIFSSEC_DEF;
/* unsigned int ntlmv2_support = 0; */
unsigned int sign_CIFS_PDUs = 1;
-extern struct task_struct *oplockThread; /* remove sparse warning */
-struct task_struct *oplockThread = NULL;
-/* extern struct task_struct * dnotifyThread; remove sparse warning */
static const struct super_operations cifs_super_ops;
unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
module_param(CIFSMaxBufSize, int, 0);
cifs_sb->mountdata = NULL;
}
#endif
- if (cifs_sb->local_nls)
- unload_nls(cifs_sb->local_nls);
+ unload_nls(cifs_sb->local_nls);
kfree(cifs_sb);
}
return rc;
kmem_cache_destroy(cifs_oplock_cachep);
}
-static int cifs_oplock_thread(void *dummyarg)
-{
- struct oplock_q_entry *oplock_item;
- struct cifsTconInfo *pTcon;
- struct inode *inode;
- __u16 netfid;
- int rc, waitrc = 0;
-
- set_freezable();
- do {
- if (try_to_freeze())
- continue;
-
- spin_lock(&cifs_oplock_lock);
- if (list_empty(&cifs_oplock_list)) {
- spin_unlock(&cifs_oplock_lock);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(39*HZ);
- } else {
- oplock_item = list_entry(cifs_oplock_list.next,
- struct oplock_q_entry, qhead);
- cFYI(1, ("found oplock item to write out"));
- pTcon = oplock_item->tcon;
- inode = oplock_item->pinode;
- netfid = oplock_item->netfid;
- spin_unlock(&cifs_oplock_lock);
- DeleteOplockQEntry(oplock_item);
- /* can not grab inode sem here since it would
- deadlock when oplock received on delete
- since vfs_unlink holds the i_mutex across
- the call */
- /* mutex_lock(&inode->i_mutex);*/
- if (S_ISREG(inode->i_mode)) {
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (CIFS_I(inode)->clientCanCacheAll == 0)
- break_lease(inode, FMODE_READ);
- else if (CIFS_I(inode)->clientCanCacheRead == 0)
- break_lease(inode, FMODE_WRITE);
-#endif
- rc = filemap_fdatawrite(inode->i_mapping);
- if (CIFS_I(inode)->clientCanCacheRead == 0) {
- waitrc = filemap_fdatawait(
- inode->i_mapping);
- invalidate_remote_inode(inode);
- }
- if (rc == 0)
- rc = waitrc;
- } else
- rc = 0;
- /* mutex_unlock(&inode->i_mutex);*/
- if (rc)
- CIFS_I(inode)->write_behind_rc = rc;
- cFYI(1, ("Oplock flush inode %p rc %d",
- inode, rc));
-
- /* releasing stale oplock after recent reconnect
- of smb session using a now incorrect file
- handle is not a data integrity issue but do
- not bother sending an oplock release if session
- to server still is disconnected since oplock
- already released by the server in that case */
- if (!pTcon->need_reconnect) {
- rc = CIFSSMBLock(0, pTcon, netfid,
- 0 /* len */ , 0 /* offset */, 0,
- 0, LOCKING_ANDX_OPLOCK_RELEASE,
- false /* wait flag */);
- cFYI(1, ("Oplock release rc = %d", rc));
- }
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1); /* yield in case q were corrupt */
- }
- } while (!kthread_should_stop());
-
- return 0;
-}
-
static int __init
init_cifs(void)
{
int rc = 0;
cifs_proc_init();
INIT_LIST_HEAD(&cifs_tcp_ses_list);
- INIT_LIST_HEAD(&cifs_oplock_list);
#ifdef CONFIG_CIFS_EXPERIMENTAL
INIT_LIST_HEAD(&GlobalDnotifyReqList);
INIT_LIST_HEAD(&GlobalDnotifyRsp_Q);
rwlock_init(&GlobalSMBSeslock);
rwlock_init(&cifs_tcp_ses_lock);
spin_lock_init(&GlobalMid_Lock);
- spin_lock_init(&cifs_oplock_lock);
if (cifs_max_pending < 2) {
cifs_max_pending = 2;
if (rc)
goto out_unregister_key_type;
#endif
- oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd");
- if (IS_ERR(oplockThread)) {
- rc = PTR_ERR(oplockThread);
- cERROR(1, ("error %d create oplock thread", rc));
- goto out_unregister_dfs_key_type;
- }
+ rc = slow_work_register_user();
+ if (rc)
+ goto out_unregister_resolver_key;
return 0;
- out_unregister_dfs_key_type:
+ out_unregister_resolver_key:
#ifdef CONFIG_CIFS_DFS_UPCALL
unregister_key_type(&key_type_dns_resolver);
out_unregister_key_type:
cifs_destroy_inodecache();
cifs_destroy_mids();
cifs_destroy_request_bufs();
- kthread_stop(oplockThread);
}
MODULE_AUTHOR("Steve French <sfrench@us.ibm.com>");
*/
#include <linux/in.h>
#include <linux/in6.h>
+#include <linux/slow-work.h>
#include "cifs_fs_sb.h"
#include "cifsacl.h"
/*
/* lock scope id (0 if none) */
struct file *pfile; /* needed for writepage */
struct inode *pInode; /* needed for oplock break */
+ struct vfsmount *mnt;
struct mutex lock_mutex;
struct list_head llist; /* list of byte range locks we have. */
bool closePend:1; /* file is marked to close */
bool invalidHandle:1; /* file closed via session abend */
- bool messageMode:1; /* for pipes: message vs byte mode */
+ bool oplock_break_cancelled:1;
atomic_t count; /* reference count */
struct mutex fh_mutex; /* prevents reopen race after dead ses*/
struct cifs_search_info srch_inf;
+ struct slow_work oplock_break; /* slow_work job for oplock breaks */
};
/* Take a reference on the file private data */
/* Release a reference on the file private data */
static inline void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
{
- if (atomic_dec_and_test(&cifs_file->count))
+ if (atomic_dec_and_test(&cifs_file->count)) {
+ iput(cifs_file->pInode);
kfree(cifs_file);
+ }
}
/*
unsigned long time; /* jiffies of last update/check of inode */
bool clientCanCacheRead:1; /* read oplock */
bool clientCanCacheAll:1; /* read and writebehind oplock */
- bool oplockPending:1;
bool delete_pending:1; /* DELETE_ON_CLOSE is set */
u64 server_eof; /* current file size on server */
u64 uniqueid; /* server inode number */
#define CIFSSEC_MUST_LANMAN 0x10010
#define CIFSSEC_MUST_PLNTXT 0x20020
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0xAF0AF /* allows weak security but also krb5 */
+#define CIFSSEC_MASK 0xBF0BF /* allows weak security but also krb5 */
#else
-#define CIFSSEC_MASK 0xA70A7 /* current flags supported if weak */
+#define CIFSSEC_MASK 0xB70B7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
#ifdef CONFIG_CIFS_UPCALL
*/
GLOBAL_EXTERN rwlock_t GlobalSMBSeslock;
-/* Global list of oplocks */
-GLOBAL_EXTERN struct list_head cifs_oplock_list;
-
-/* Protects the cifs_oplock_list */
-GLOBAL_EXTERN spinlock_t cifs_oplock_lock;
-
/* Outstanding dir notify requests */
GLOBAL_EXTERN struct list_head GlobalDnotifyReqList;
/* DirNotify response queue */
GLOBAL_EXTERN unsigned int cifs_min_small; /* min size of small buf pool */
GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
+extern const struct slow_work_ops cifs_oplock_break_ops;
const int stage,
const struct nls_table *nls_cp);
extern __u16 GetNextMid(struct TCP_Server_Info *server);
-extern struct oplock_q_entry *AllocOplockQEntry(struct inode *, u16,
- struct cifsTconInfo *);
-extern void DeleteOplockQEntry(struct oplock_q_entry *);
-extern void DeleteTconOplockQEntries(struct cifsTconInfo *);
extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
extern u64 cifs_UnixTimeToNT(struct timespec);
extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
int offset);
+extern struct cifsFileInfo *cifs_new_fileinfo(struct inode *newinode,
+ __u16 fileHandle, struct file *file,
+ struct vfsmount *mnt, unsigned int oflags);
extern int cifs_posix_open(char *full_path, struct inode **pinode,
- struct super_block *sb, int mode, int oflags,
- int *poplock, __u16 *pnetfid, int xid);
+ struct vfsmount *mnt, int mode, int oflags,
+ __u32 *poplock, __u16 *pnetfid, int xid);
extern void cifs_unix_basic_to_fattr(struct cifs_fattr *fattr,
FILE_UNIX_BASIC_INFO *info,
struct cifs_sb_info *cifs_sb);
list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
open_file = list_entry(tmp, struct cifsFileInfo, tlist);
open_file->invalidHandle = true;
+ open_file->oplock_break_cancelled = true;
}
write_unlock(&GlobalSMBSeslock);
/* BB Add call to invalidate_inodes(sb) for all superblocks mounted
CIFSSMBTDis(xid, tcon);
_FreeXid(xid);
- DeleteTconOplockQEntries(tcon);
tconInfoFree(tcon);
cifs_put_smb_ses(ses);
}
#include <linux/stat.h>
#include <linux/slab.h>
#include <linux/namei.h>
+#include <linux/mount.h>
#include "cifsfs.h"
#include "cifspdu.h"
#include "cifsglob.h"
return full_path;
}
-static void
-cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
- struct cifsTconInfo *tcon, bool write_only)
+struct cifsFileInfo *
+cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
+ struct file *file, struct vfsmount *mnt, unsigned int oflags)
{
int oplock = 0;
struct cifsFileInfo *pCifsFile;
struct cifsInodeInfo *pCifsInode;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
if (pCifsFile == NULL)
- return;
+ return pCifsFile;
if (oplockEnabled)
oplock = REQ_OPLOCK;
pCifsFile->netfid = fileHandle;
pCifsFile->pid = current->tgid;
- pCifsFile->pInode = newinode;
+ pCifsFile->pInode = igrab(newinode);
+ pCifsFile->mnt = mnt;
+ pCifsFile->pfile = file;
pCifsFile->invalidHandle = false;
pCifsFile->closePend = false;
mutex_init(&pCifsFile->fh_mutex);
mutex_init(&pCifsFile->lock_mutex);
INIT_LIST_HEAD(&pCifsFile->llist);
atomic_set(&pCifsFile->count, 1);
+ slow_work_init(&pCifsFile->oplock_break, &cifs_oplock_break_ops);
- /* set the following in open now
- pCifsFile->pfile = file; */
write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
+ list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
pCifsInode = CIFS_I(newinode);
if (pCifsInode) {
/* if readable file instance put first in list*/
- if (write_only)
+ if (oflags & FMODE_READ)
+ list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+ else
list_add_tail(&pCifsFile->flist,
&pCifsInode->openFileList);
- else
- list_add(&pCifsFile->flist, &pCifsInode->openFileList);
if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
pCifsInode->clientCanCacheAll = true;
pCifsInode->clientCanCacheRead = true;
}
write_unlock(&GlobalSMBSeslock);
+
+ return pCifsFile;
}
int cifs_posix_open(char *full_path, struct inode **pinode,
- struct super_block *sb, int mode, int oflags,
- int *poplock, __u16 *pnetfid, int xid)
+ struct vfsmount *mnt, int mode, int oflags,
+ __u32 *poplock, __u16 *pnetfid, int xid)
{
int rc;
- __u32 oplock;
- bool write_only = false;
FILE_UNIX_BASIC_INFO *presp_data;
__u32 posix_flags = 0;
- struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
struct cifs_fattr fattr;
cFYI(1, ("posix open %s", full_path));
if (oflags & O_DIRECT)
posix_flags |= SMB_O_DIRECT;
- if (!(oflags & FMODE_READ))
- write_only = true;
-
mode &= ~current_umask();
rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
- pnetfid, presp_data, &oplock, full_path,
+ pnetfid, presp_data, poplock, full_path,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc)
/* get new inode and set it up */
if (*pinode == NULL) {
- *pinode = cifs_iget(sb, &fattr);
+ *pinode = cifs_iget(mnt->mnt_sb, &fattr);
if (!*pinode) {
rc = -ENOMEM;
goto posix_open_ret;
cifs_fattr_to_inode(*pinode, &fattr);
}
- cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+ cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt, oflags);
posix_open_ret:
kfree(presp_data);
int rc = -ENOENT;
int xid;
int create_options = CREATE_NOT_DIR;
- int oplock = 0;
+ __u32 oplock = 0;
int oflags;
bool posix_create = false;
/*
FILE_ALL_INFO *buf = NULL;
struct inode *newinode = NULL;
int disposition = FILE_OVERWRITE_IF;
- bool write_only = false;
xid = GetXid();
if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
(CIFS_UNIX_POSIX_PATH_OPS_CAP &
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
- rc = cifs_posix_open(full_path, &newinode, inode->i_sb,
+ rc = cifs_posix_open(full_path, &newinode, nd->path.mnt,
mode, oflags, &oplock, &fileHandle, xid);
/* EIO could indicate that (posix open) operation is not
supported, despite what server claimed in capability
desiredAccess = 0;
if (oflags & FMODE_READ)
desiredAccess |= GENERIC_READ; /* is this too little? */
- if (oflags & FMODE_WRITE) {
+ if (oflags & FMODE_WRITE)
desiredAccess |= GENERIC_WRITE;
- if (!(oflags & FMODE_READ))
- write_only = true;
- }
if ((oflags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
disposition = FILE_CREATE;
/* mknod case - do not leave file open */
CIFSSMBClose(xid, tcon, fileHandle);
} else if (!(posix_create) && (newinode)) {
- cifs_fill_fileinfo(newinode, fileHandle,
- cifs_sb->tcon, write_only);
+ cifs_new_fileinfo(newinode, fileHandle, NULL,
+ nd->path.mnt, oflags);
}
cifs_create_out:
kfree(buf);
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
- int oplock = 0;
+ __u32 oplock = 0;
__u16 fileHandle = 0;
bool posix_open = false;
struct cifs_sb_info *cifs_sb;
if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
(nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
(nd->intent.open.flags & O_CREAT)) {
- rc = cifs_posix_open(full_path, &newInode,
- parent_dir_inode->i_sb,
+ rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
nd->intent.open.create_mode,
nd->intent.open.flags, &oplock,
&fileHandle, xid);
#include <linux/writeback.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/delay.h>
+#include <linux/mount.h>
#include <asm/div64.h>
#include "cifsfs.h"
#include "cifspdu.h"
#include "cifs_debug.h"
#include "cifs_fs_sb.h"
-static inline struct cifsFileInfo *cifs_init_private(
- struct cifsFileInfo *private_data, struct inode *inode,
- struct file *file, __u16 netfid)
-{
- memset(private_data, 0, sizeof(struct cifsFileInfo));
- private_data->netfid = netfid;
- private_data->pid = current->tgid;
- mutex_init(&private_data->fh_mutex);
- mutex_init(&private_data->lock_mutex);
- INIT_LIST_HEAD(&private_data->llist);
- private_data->pfile = file; /* needed for writepage */
- private_data->pInode = inode;
- private_data->invalidHandle = false;
- private_data->closePend = false;
- /* Initialize reference count to one. The private data is
- freed on the release of the last reference */
- atomic_set(&private_data->count, 1);
-
- return private_data;
-}
-
static inline int cifs_convert_flags(unsigned int flags)
{
if ((flags & O_ACCMODE) == O_RDONLY)
}
/* all arguments to this function must be checked for validity in caller */
-static inline int cifs_posix_open_inode_helper(struct inode *inode,
- struct file *file, struct cifsInodeInfo *pCifsInode,
- struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
+static inline int
+cifs_posix_open_inode_helper(struct inode *inode, struct file *file,
+ struct cifsInodeInfo *pCifsInode,
+ struct cifsFileInfo *pCifsFile, __u32 oplock,
+ u16 netfid)
{
write_lock(&GlobalSMBSeslock);
struct timespec temp;
int rc;
- /* want handles we can use to read with first
- in the list so we do not have to walk the
- list to search for one in write_begin */
- if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
- write_unlock(&GlobalSMBSeslock);
if (pCifsInode->clientCanCacheRead) {
/* we have the inode open somewhere else
no need to discard cache data */
int cifs_open(struct inode *inode, struct file *file)
{
int rc = -EACCES;
- int xid, oplock;
+ int xid;
+ __u32 oplock;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
struct cifsFileInfo *pCifsFile;
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
int oflags = (int) cifs_posix_convert_flags(file->f_flags);
/* can not refresh inode info since size could be stale */
- rc = cifs_posix_open(full_path, &inode, inode->i_sb,
+ rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
cifs_sb->mnt_file_mode /* ignored */,
oflags, &oplock, &netfid, xid);
if (rc == 0) {
cFYI(1, ("cifs_open returned 0x%x", rc));
goto out;
}
- file->private_data =
- kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+ pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
+ file->f_flags);
+ file->private_data = pCifsFile;
if (file->private_data == NULL) {
rc = -ENOMEM;
goto out;
}
- pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
- write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
- pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- if (pCifsInode) {
- rc = cifs_open_inode_helper(inode, file, pCifsInode,
- pCifsFile, tcon,
- &oplock, buf, full_path, xid);
- } else {
- write_unlock(&GlobalSMBSeslock);
- }
+ rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
+ &oplock, buf, full_path, xid);
if (oplock & CIFS_CREATE_ACTION) {
/* time to set mode which we can not set earlier due to
static int cifs_reopen_file(struct file *file, bool can_flush)
{
int rc = -EACCES;
- int xid, oplock;
+ int xid;
+ __u32 oplock;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
struct cifsFileInfo *pCifsFile;
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
int oflags = (int) cifs_posix_convert_flags(file->f_flags);
/* can not refresh inode info since size could be stale */
- rc = cifs_posix_open(full_path, NULL, inode->i_sb,
+ rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
cifs_sb->mnt_file_mode /* ignored */,
oflags, &oplock, &netfid, xid);
if (rc == 0) {
return rc;
}
+static void
+cifs_oplock_break(struct slow_work *work)
+{
+ struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+ oplock_break);
+ struct inode *inode = cfile->pInode;
+ struct cifsInodeInfo *cinode = CIFS_I(inode);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(cfile->mnt->mnt_sb);
+ int rc, waitrc = 0;
+
+ if (inode && S_ISREG(inode->i_mode)) {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ if (cinode->clientCanCacheAll == 0)
+ break_lease(inode, FMODE_READ);
+ else if (cinode->clientCanCacheRead == 0)
+ break_lease(inode, FMODE_WRITE);
+#endif
+ rc = filemap_fdatawrite(inode->i_mapping);
+ if (cinode->clientCanCacheRead == 0) {
+ waitrc = filemap_fdatawait(inode->i_mapping);
+ invalidate_remote_inode(inode);
+ }
+ if (!rc)
+ rc = waitrc;
+ if (rc)
+ cinode->write_behind_rc = rc;
+ cFYI(1, ("Oplock flush inode %p rc %d", inode, rc));
+ }
+
+ /*
+ * releasing stale oplock after recent reconnect of smb session using
+ * a now incorrect file handle is not a data integrity issue but do
+ * not bother sending an oplock release if session to server still is
+ * disconnected since oplock already released by the server
+ */
+ if (!cfile->closePend && !cfile->oplock_break_cancelled) {
+ rc = CIFSSMBLock(0, cifs_sb->tcon, cfile->netfid, 0, 0, 0, 0,
+ LOCKING_ANDX_OPLOCK_RELEASE, false);
+ cFYI(1, ("Oplock release rc = %d", rc));
+ }
+}
+
+static int
+cifs_oplock_break_get(struct slow_work *work)
+{
+ struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+ oplock_break);
+ mntget(cfile->mnt);
+ cifsFileInfo_get(cfile);
+ return 0;
+}
+
+static void
+cifs_oplock_break_put(struct slow_work *work)
+{
+ struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+ oplock_break);
+ mntput(cfile->mnt);
+ cifsFileInfo_put(cfile);
+}
+
+const struct slow_work_ops cifs_oplock_break_ops = {
+ .get_ref = cifs_oplock_break_get,
+ .put_ref = cifs_oplock_break_put,
+ .execute = cifs_oplock_break,
+};
+
const struct address_space_operations cifs_addr_ops = {
.readpage = cifs_readpage,
.readpages = cifs_readpages,
static int cifs_vmtruncate(struct inode *inode, loff_t offset)
{
- struct address_space *mapping = inode->i_mapping;
- unsigned long limit;
+ loff_t oldsize;
+ int err;
spin_lock(&inode->i_lock);
- if (inode->i_size < offset)
- goto do_expand;
- /*
- * truncation of in-use swapfiles is disallowed - it would cause
- * subsequent swapout to scribble on the now-freed blocks.
- */
- if (IS_SWAPFILE(inode)) {
- spin_unlock(&inode->i_lock);
- goto out_busy;
- }
- i_size_write(inode, offset);
- spin_unlock(&inode->i_lock);
- /*
- * unmap_mapping_range is called twice, first simply for efficiency
- * so that truncate_inode_pages does fewer single-page unmaps. However
- * after this first call, and before truncate_inode_pages finishes,
- * it is possible for private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second unmap_mapping_range
- * call must be made for correctness.
- */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- goto out_truncate;
-
-do_expand:
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit) {
+ err = inode_newsize_ok(inode, offset);
+ if (err) {
spin_unlock(&inode->i_lock);
- goto out_sig;
- }
- if (offset > inode->i_sb->s_maxbytes) {
- spin_unlock(&inode->i_lock);
- goto out_big;
+ goto out;
}
+
+ oldsize = inode->i_size;
i_size_write(inode, offset);
spin_unlock(&inode->i_lock);
-out_truncate:
+ truncate_pagecache(inode, oldsize, offset);
if (inode->i_op->truncate)
inode->i_op->truncate(inode);
- return 0;
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out_big:
- return -EFBIG;
-out_busy:
- return -ETXTBSY;
+out:
+ return err;
}
static int
extern mempool_t *cifs_sm_req_poolp;
extern mempool_t *cifs_req_poolp;
-extern struct task_struct *oplockThread;
/* The xid serves as a useful identifier for each incoming vfs request,
in a similar way to the mid which is useful to track each sent smb,
struct cifsTconInfo *tcon;
struct cifsInodeInfo *pCifsInode;
struct cifsFileInfo *netfile;
+ int rc;
cFYI(1, ("Checking for oplock break or dnotify response"));
if ((pSMB->hdr.Command == SMB_COM_NT_TRANSACT) &&
continue;
cifs_stats_inc(&tcon->num_oplock_brks);
- write_lock(&GlobalSMBSeslock);
+ read_lock(&GlobalSMBSeslock);
list_for_each(tmp2, &tcon->openFileList) {
netfile = list_entry(tmp2, struct cifsFileInfo,
tlist);
if (pSMB->Fid != netfile->netfid)
continue;
- write_unlock(&GlobalSMBSeslock);
- read_unlock(&cifs_tcp_ses_lock);
+ /*
+ * don't do anything if file is about to be
+ * closed anyway.
+ */
+ if (netfile->closePend) {
+ read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
+ return true;
+ }
+
cFYI(1, ("file id match, oplock break"));
pCifsInode = CIFS_I(netfile->pInode);
pCifsInode->clientCanCacheAll = false;
if (pSMB->OplockLevel == 0)
pCifsInode->clientCanCacheRead = false;
- pCifsInode->oplockPending = true;
- AllocOplockQEntry(netfile->pInode,
- netfile->netfid, tcon);
- cFYI(1, ("about to wake up oplock thread"));
- if (oplockThread)
- wake_up_process(oplockThread);
-
+ rc = slow_work_enqueue(&netfile->oplock_break);
+ if (rc) {
+ cERROR(1, ("failed to enqueue oplock "
+ "break: %d\n", rc));
+ } else {
+ netfile->oplock_break_cancelled = false;
+ }
+ read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
return true;
}
- write_unlock(&GlobalSMBSeslock);
+ read_unlock(&GlobalSMBSeslock);
read_unlock(&cifs_tcp_ses_lock);
cFYI(1, ("No matching file for oplock break"));
return true;
}
}
-void
+static void
cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info,
struct cifs_sb_info *cifs_sb)
{
cifs_fill_common_info(fattr, cifs_sb);
}
-void
+static void
cifs_std_info_to_fattr(struct cifs_fattr *fattr, FIND_FILE_STANDARD_INFO *info,
struct cifs_sb_info *cifs_sb)
{
mempool_free(midEntry, cifs_mid_poolp);
}
-struct oplock_q_entry *
-AllocOplockQEntry(struct inode *pinode, __u16 fid, struct cifsTconInfo *tcon)
-{
- struct oplock_q_entry *temp;
- if ((pinode == NULL) || (tcon == NULL)) {
- cERROR(1, ("Null parms passed to AllocOplockQEntry"));
- return NULL;
- }
- temp = (struct oplock_q_entry *) kmem_cache_alloc(cifs_oplock_cachep,
- GFP_KERNEL);
- if (temp == NULL)
- return temp;
- else {
- temp->pinode = pinode;
- temp->tcon = tcon;
- temp->netfid = fid;
- spin_lock(&cifs_oplock_lock);
- list_add_tail(&temp->qhead, &cifs_oplock_list);
- spin_unlock(&cifs_oplock_lock);
- }
- return temp;
-}
-
-void DeleteOplockQEntry(struct oplock_q_entry *oplockEntry)
-{
- spin_lock(&cifs_oplock_lock);
- /* should we check if list empty first? */
- list_del(&oplockEntry->qhead);
- spin_unlock(&cifs_oplock_lock);
- kmem_cache_free(cifs_oplock_cachep, oplockEntry);
-}
-
-
-void DeleteTconOplockQEntries(struct cifsTconInfo *tcon)
-{
- struct oplock_q_entry *temp;
-
- if (tcon == NULL)
- return;
-
- spin_lock(&cifs_oplock_lock);
- list_for_each_entry(temp, &cifs_oplock_list, qhead) {
- if ((temp->tcon) && (temp->tcon == tcon)) {
- list_del(&temp->qhead);
- kmem_cache_free(cifs_oplock_cachep, temp);
- }
- }
- spin_unlock(&cifs_oplock_lock);
-}
-
static int
smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
{
#define _CODA_INT_
struct dentry;
+struct file;
extern struct file_system_type coda_fs_type;
extern unsigned long coda_timeout;
char __user * type, unsigned long flags,
void __user * data)
{
- unsigned long type_page;
+ char *kernel_type;
unsigned long data_page;
- unsigned long dev_page;
+ char *kernel_dev;
char *dir_page;
int retval;
- retval = copy_mount_options (type, &type_page);
+ retval = copy_mount_string(type, &kernel_type);
if (retval < 0)
goto out;
if (IS_ERR(dir_page))
goto out1;
- retval = copy_mount_options (dev_name, &dev_page);
+ retval = copy_mount_string(dev_name, &kernel_dev);
if (retval < 0)
goto out2;
- retval = copy_mount_options (data, &data_page);
+ retval = copy_mount_options(data, &data_page);
if (retval < 0)
goto out3;
retval = -EINVAL;
- if (type_page && data_page) {
- if (!strcmp((char *)type_page, SMBFS_NAME)) {
+ if (kernel_type && data_page) {
+ if (!strcmp(kernel_type, SMBFS_NAME)) {
do_smb_super_data_conv((void *)data_page);
- } else if (!strcmp((char *)type_page, NCPFS_NAME)) {
+ } else if (!strcmp(kernel_type, NCPFS_NAME)) {
do_ncp_super_data_conv((void *)data_page);
- } else if (!strcmp((char *)type_page, NFS4_NAME)) {
+ } else if (!strcmp(kernel_type, NFS4_NAME)) {
if (do_nfs4_super_data_conv((void *) data_page))
goto out4;
}
}
- retval = do_mount((char*)dev_page, dir_page, (char*)type_page,
+ retval = do_mount(kernel_dev, dir_page, kernel_type,
flags, (void*)data_page);
out4:
free_page(data_page);
out3:
- free_page(dev_page);
+ kfree(kernel_dev);
out2:
putname(dir_page);
out1:
- free_page(type_page);
+ kfree(kernel_type);
out:
return retval;
}
}
int drop_caches_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ proc_dointvec_minmax(table, write, buffer, length, ppos);
if (write) {
if (sysctl_drop_caches & 1)
drop_pagecache();
config ECRYPT_FS
tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+ depends on EXPERIMENTAL && KEYS && NET
+ select CRYPTO_ECB
+ select CRYPTO_CBC
help
Encrypted filesystem that operates on the VFS layer. See
<file:Documentation/filesystems/ecryptfs.txt> to learn more about
crypto_free_blkcipher(crypt_stat->tfm);
if (crypt_stat->hash_tfm)
crypto_free_hash(crypt_stat->hash_tfm);
- mutex_lock(&crypt_stat->keysig_list_mutex);
list_for_each_entry_safe(key_sig, key_sig_tmp,
&crypt_stat->keysig_list, crypt_stat_list) {
list_del(&key_sig->crypt_stat_list);
kmem_cache_free(ecryptfs_key_sig_cache, key_sig);
}
- mutex_unlock(&crypt_stat->keysig_list_mutex);
memset(crypt_stat, 0, sizeof(struct ecryptfs_crypt_stat));
}
+ extent_offset), crypt_stat);
rc = ecryptfs_write_lower(ecryptfs_inode, enc_extent_virt,
offset, crypt_stat->extent_size);
- if (rc) {
+ if (rc < 0) {
ecryptfs_printk(KERN_ERR, "Error attempting "
"to write lower page; rc = [%d]"
"\n", rc);
goto out;
}
}
+ rc = 0;
out:
if (enc_extent_page) {
kunmap(enc_extent_page);
rc = ecryptfs_read_lower(enc_extent_virt, offset,
crypt_stat->extent_size,
ecryptfs_inode);
- if (rc) {
+ if (rc < 0) {
ecryptfs_printk(KERN_ERR, "Error attempting "
"to read lower page; rc = [%d]"
"\n", rc);
kfree(full_alg_name);
if (IS_ERR(crypt_stat->tfm)) {
rc = PTR_ERR(crypt_stat->tfm);
+ crypt_stat->tfm = NULL;
ecryptfs_printk(KERN_ERR, "cryptfs: init_crypt_ctx(): "
"Error initializing cipher [%s]\n",
crypt_stat->cipher);
struct ecryptfs_global_auth_tok *global_auth_tok;
int rc = 0;
+ mutex_lock(&crypt_stat->keysig_list_mutex);
mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
list_for_each_entry(global_auth_tok,
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
if (rc) {
printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
- mutex_unlock(
- &mount_crypt_stat->global_auth_tok_list_mutex);
goto out;
}
}
- mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
out:
+ mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+ mutex_unlock(&crypt_stat->keysig_list_mutex);
return rc;
}
crypt_stat->extent_size = ECRYPTFS_DEFAULT_EXTENT_SIZE;
rc = ecryptfs_read_lower(data, 0, crypt_stat->extent_size,
ecryptfs_inode);
- if (rc) {
+ if (rc < 0) {
printk(KERN_ERR "%s: Error reading header region; rc = [%d]\n",
__func__, rc);
goto out;
}
if (!contains_ecryptfs_marker(data + ECRYPTFS_FILE_SIZE_BYTES)) {
rc = -EINVAL;
- }
+ } else
+ rc = 0;
out:
return rc;
}
rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
0, virt_len);
- if (rc)
+ if (rc < 0)
printk(KERN_ERR "%s: Error attempting to write header "
- "information to lower file; rc = [%d]\n", __func__,
- rc);
+ "information to lower file; rc = [%d]\n", __func__, rc);
+ else
+ rc = 0;
return rc;
}
}
rc = ecryptfs_read_lower(page_virt, 0, crypt_stat->extent_size,
ecryptfs_inode);
- if (!rc)
+ if (rc >= 0)
rc = ecryptfs_read_headers_virt(page_virt, crypt_stat,
ecryptfs_dentry,
ECRYPTFS_VALIDATE_HEADER_SIZE);
} else {
printk(KERN_ERR "%s: No support for requested filename "
"encryption method in this release\n", __func__);
- rc = -ENOTSUPP;
+ rc = -EOPNOTSUPP;
goto out;
}
out:
if (IS_ERR(*key_tfm)) {
rc = PTR_ERR(*key_tfm);
printk(KERN_ERR "Unable to allocate crypto cipher with name "
- "[%s]; rc = [%d]\n", cipher_name, rc);
+ "[%s]; rc = [%d]\n", full_alg_name, rc);
goto out;
}
crypto_blkcipher_set_flags(*key_tfm, CRYPTO_TFM_REQ_WEAK_KEY);
rc = crypto_blkcipher_setkey(*key_tfm, dummy_key, *key_size);
if (rc) {
printk(KERN_ERR "Error attempting to set key of size [%zd] for "
- "cipher [%s]; rc = [%d]\n", *key_size, cipher_name, rc);
+ "cipher [%s]; rc = [%d]\n", *key_size, full_alg_name,
+ rc);
rc = -EINVAL;
goto out;
}
(*encoded_name)[(*encoded_name_size)] = '\0';
(*encoded_name_size)++;
} else {
- rc = -ENOTSUPP;
+ rc = -EOPNOTSUPP;
}
if (rc) {
printk(KERN_ERR "%s: Error attempting to encode "
struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
struct dentry *lower_dir_dentry;
+ dget(lower_dentry);
lower_dir_dentry = lock_parent(lower_dentry);
rc = vfs_unlink(lower_dir_inode, lower_dentry);
if (rc) {
d_drop(dentry);
out_unlock:
unlock_dir(lower_dir_dentry);
+ dput(lower_dentry);
return rc;
}
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
if (memcmp(walker->sig, sig, ECRYPTFS_SIG_SIZE_HEX) == 0) {
- (*global_auth_tok) = walker;
+ rc = key_validate(walker->global_auth_tok_key);
+ if (!rc)
+ (*global_auth_tok) = walker;
goto out;
}
}
}
/* TODO: Support other key modules than passphrase for
* filename encryption */
- BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+ if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+ rc = -EOPNOTSUPP;
+ printk(KERN_INFO "%s: Filename encryption only supports "
+ "password tokens\n", __func__);
+ goto out_free_unlock;
+ }
sg_init_one(
&s->hash_sg,
(u8 *)s->auth_tok->token.password.session_key_encryption_key,
}
/* TODO: Support other key modules than passphrase for
* filename encryption */
- BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+ if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+ rc = -EOPNOTSUPP;
+ printk(KERN_INFO "%s: Filename encryption only supports "
+ "password tokens\n", __func__);
+ goto out_free_unlock;
+ }
rc = crypto_blkcipher_setkey(
s->desc.tfm,
s->auth_tok->token.password.session_key_encryption_key,
rc = -EINVAL;
goto out_free;
}
- ecryptfs_cipher_code_to_string(crypt_stat->cipher,
- (u16)data[(*packet_size)]);
+ rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher,
+ (u16)data[(*packet_size)]);
+ if (rc)
+ goto out_free;
/* A little extra work to differentiate among the AES key
* sizes; see RFC2440 */
switch(data[(*packet_size)++]) {
crypt_stat->key_size =
(*new_auth_tok)->session_key.encrypted_key_size;
}
- ecryptfs_init_crypt_ctx(crypt_stat);
+ rc = ecryptfs_init_crypt_ctx(crypt_stat);
+ if (rc)
+ goto out_free;
if (unlikely(data[(*packet_size)++] != 0x03)) {
printk(KERN_WARNING "Only S2K ID 3 is currently supported\n");
rc = -ENOSYS;
int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig)
{
struct ecryptfs_key_sig *new_key_sig;
- int rc = 0;
new_key_sig = kmem_cache_alloc(ecryptfs_key_sig_cache, GFP_KERNEL);
if (!new_key_sig) {
- rc = -ENOMEM;
printk(KERN_ERR
"Error allocating from ecryptfs_key_sig_cache\n");
- goto out;
+ return -ENOMEM;
}
memcpy(new_key_sig->keysig, sig, ECRYPTFS_SIG_SIZE_HEX);
- mutex_lock(&crypt_stat->keysig_list_mutex);
+ /* Caller must hold keysig_list_mutex */
list_add(&new_key_sig->crypt_stat_list, &crypt_stat->keysig_list);
- mutex_unlock(&crypt_stat->keysig_list_mutex);
-out:
- return rc;
+
+ return 0;
}
struct kmem_cache *ecryptfs_global_auth_tok_cache;
const struct cred *cred)
{
struct ecryptfs_open_req *req;
+ int flags = O_LARGEFILE;
int rc = 0;
/* Corresponding dput() and mntput() are done when the
* destroyed. */
dget(lower_dentry);
mntget(lower_mnt);
- (*lower_file) = dentry_open(lower_dentry, lower_mnt,
- (O_RDWR | O_LARGEFILE), cred);
+ flags |= IS_RDONLY(lower_dentry->d_inode) ? O_RDONLY : O_RDWR;
+ (*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
if (!IS_ERR(*lower_file))
goto out;
+ if (flags & O_RDONLY) {
+ rc = PTR_ERR((*lower_file));
+ goto out;
+ }
req = kmem_cache_alloc(ecryptfs_open_req_cache, GFP_KERNEL);
if (!req) {
rc = -ENOMEM;
__func__);
goto out_unlock;
}
- if (IS_ERR(*req->lower_file)) {
+ if (IS_ERR(*req->lower_file))
rc = PTR_ERR(*req->lower_file);
- dget(lower_dentry);
- mntget(lower_mnt);
- (*lower_file) = dentry_open(lower_dentry, lower_mnt,
- (O_RDONLY | O_LARGEFILE), cred);
- if (IS_ERR(*lower_file)) {
- rc = PTR_ERR(*req->lower_file);
- (*lower_file) = NULL;
- printk(KERN_WARNING "%s: Error attempting privileged "
- "open of lower file with either RW or RO "
- "perms; rc = [%d]. Giving up.\n",
- __func__, rc);
- }
- }
out_unlock:
mutex_unlock(&req->mux);
out_free:
lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
rc = ecryptfs_privileged_open(&inode_info->lower_file,
lower_dentry, lower_mnt, cred);
- if (rc || IS_ERR(inode_info->lower_file)) {
+ if (rc) {
printk(KERN_ERR "Error opening lower persistent file "
"for lower_dentry [0x%p] and lower_mnt [0x%p]; "
"rc = [%d]\n", lower_dentry, lower_mnt, rc);
- rc = PTR_ERR(inode_info->lower_file);
inode_info->lower_file = NULL;
}
}
rc = ecryptfs_write_lower(ecryptfs_inode, file_size_virt, 0,
sizeof(u64));
kfree(file_size_virt);
- if (rc)
+ if (rc < 0)
printk(KERN_ERR "%s: Error writing file size to header; "
"rc = [%d]\n", __func__, rc);
+ else
+ rc = 0;
out:
return rc;
}
*
* Write data to the lower file.
*
- * Returns zero on success; non-zero on error
+ * Returns bytes written on success; less than zero on error
*/
int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
loff_t offset, size_t size)
{
struct ecryptfs_inode_info *inode_info;
- ssize_t octets_written;
mm_segment_t fs_save;
- int rc = 0;
+ ssize_t rc;
inode_info = ecryptfs_inode_to_private(ecryptfs_inode);
mutex_lock(&inode_info->lower_file_mutex);
inode_info->lower_file->f_pos = offset;
fs_save = get_fs();
set_fs(get_ds());
- octets_written = vfs_write(inode_info->lower_file, data, size,
- &inode_info->lower_file->f_pos);
+ rc = vfs_write(inode_info->lower_file, data, size,
+ &inode_info->lower_file->f_pos);
set_fs(fs_save);
- if (octets_written < 0) {
- printk(KERN_ERR "%s: octets_written = [%td]; "
- "expected [%td]\n", __func__, octets_written, size);
- rc = -EINVAL;
- }
mutex_unlock(&inode_info->lower_file_mutex);
mark_inode_dirty_sync(ecryptfs_inode);
return rc;
+ offset_in_page);
virt = kmap(page_for_lower);
rc = ecryptfs_write_lower(ecryptfs_inode, virt, offset, size);
+ if (rc > 0)
+ rc = 0;
kunmap(page_for_lower);
return rc;
}
* Read @size bytes of data at byte offset @offset from the lower
* inode into memory location @data.
*
- * Returns zero on success; non-zero on error
+ * Returns bytes read on success; 0 on EOF; less than zero on error
*/
int ecryptfs_read_lower(char *data, loff_t offset, size_t size,
struct inode *ecryptfs_inode)
{
struct ecryptfs_inode_info *inode_info =
ecryptfs_inode_to_private(ecryptfs_inode);
- ssize_t octets_read;
mm_segment_t fs_save;
- int rc = 0;
+ ssize_t rc;
mutex_lock(&inode_info->lower_file_mutex);
BUG_ON(!inode_info->lower_file);
inode_info->lower_file->f_pos = offset;
fs_save = get_fs();
set_fs(get_ds());
- octets_read = vfs_read(inode_info->lower_file, data, size,
- &inode_info->lower_file->f_pos);
+ rc = vfs_read(inode_info->lower_file, data, size,
+ &inode_info->lower_file->f_pos);
set_fs(fs_save);
- if (octets_read < 0) {
- printk(KERN_ERR "%s: octets_read = [%td]; "
- "expected [%td]\n", __func__, octets_read, size);
- rc = -EINVAL;
- }
mutex_unlock(&inode_info->lower_file_mutex);
return rc;
}
offset = ((((loff_t)page_index) << PAGE_CACHE_SHIFT) + offset_in_page);
virt = kmap(page_for_ecryptfs);
rc = ecryptfs_read_lower(virt, offset, size, ecryptfs_inode);
+ if (rc > 0)
+ rc = 0;
kunmap(page_for_ecryptfs);
flush_dcache_page(page_for_ecryptfs);
return rc;
struct ecryptfs_inode_info *inode_info;
inode_info = ecryptfs_inode_to_private(inode);
- mutex_lock(&inode_info->lower_file_mutex);
if (inode_info->lower_file) {
struct dentry *lower_dentry =
inode_info->lower_file->f_dentry;
d_drop(lower_dentry);
}
}
- mutex_unlock(&inode_info->lower_file_mutex);
ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
kmem_cache_free(ecryptfs_inode_info_cache, inode_info);
}
#include <linux/kmod.h>
#include <linux/fsnotify.h>
#include <linux/fs_struct.h>
+#include <linux/pipe_fs_i.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
int core_uses_pid;
char core_pattern[CORENAME_MAX_SIZE] = "core";
+unsigned int core_pipe_limit;
int suid_dumpable = 0;
/* The maximal length of core_pattern is also specified in sysctl.c */
return retval;
}
-int set_binfmt(struct linux_binfmt *new)
+void set_binfmt(struct linux_binfmt *new)
{
- struct linux_binfmt *old = current->binfmt;
+ struct mm_struct *mm = current->mm;
- if (new) {
- if (!try_module_get(new->module))
- return -1;
- }
- current->binfmt = new;
- if (old)
- module_put(old->module);
- return 0;
+ if (mm->binfmt)
+ module_put(mm->binfmt->module);
+
+ mm->binfmt = new;
+ if (new)
+ __module_get(new->module);
}
EXPORT_SYMBOL(set_binfmt);
return (ret >= 2) ? 2 : ret;
}
+static void wait_for_dump_helpers(struct file *file)
+{
+ struct pipe_inode_info *pipe;
+
+ pipe = file->f_path.dentry->d_inode->i_pipe;
+
+ pipe_lock(pipe);
+ pipe->readers++;
+ pipe->writers--;
+
+ while ((pipe->readers > 1) && (!signal_pending(current))) {
+ wake_up_interruptible_sync(&pipe->wait);
+ kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
+ pipe_wait(pipe);
+ }
+
+ pipe->readers--;
+ pipe->writers++;
+ pipe_unlock(pipe);
+
+}
+
+
void do_coredump(long signr, int exit_code, struct pt_regs *regs)
{
struct core_state core_state;
unsigned long core_limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
char **helper_argv = NULL;
int helper_argc = 0;
- char *delimit;
+ int dump_count = 0;
+ static atomic_t core_dump_count = ATOMIC_INIT(0);
audit_core_dumps(signr);
- binfmt = current->binfmt;
+ binfmt = mm->binfmt;
if (!binfmt || !binfmt->core_dump)
goto fail;
lock_kernel();
ispipe = format_corename(corename, signr);
unlock_kernel();
- /*
- * Don't bother to check the RLIMIT_CORE value if core_pattern points
- * to a pipe. Since we're not writing directly to the filesystem
- * RLIMIT_CORE doesn't really apply, as no actual core file will be
- * created unless the pipe reader choses to write out the core file
- * at which point file size limits and permissions will be imposed
- * as it does with any other process
- */
+
if ((!ispipe) && (core_limit < binfmt->min_coredump))
goto fail_unlock;
if (ispipe) {
+ if (core_limit == 0) {
+ /*
+ * Normally core limits are irrelevant to pipes, since
+ * we're not writing to the file system, but we use
+ * core_limit of 0 here as a speacial value. Any
+ * non-zero limit gets set to RLIM_INFINITY below, but
+ * a limit of 0 skips the dump. This is a consistent
+ * way to catch recursive crashes. We can still crash
+ * if the core_pattern binary sets RLIM_CORE = !0
+ * but it runs as root, and can do lots of stupid things
+ * Note that we use task_tgid_vnr here to grab the pid
+ * of the process group leader. That way we get the
+ * right pid if a thread in a multi-threaded
+ * core_pattern process dies.
+ */
+ printk(KERN_WARNING
+ "Process %d(%s) has RLIMIT_CORE set to 0\n",
+ task_tgid_vnr(current), current->comm);
+ printk(KERN_WARNING "Aborting core\n");
+ goto fail_unlock;
+ }
+
+ dump_count = atomic_inc_return(&core_dump_count);
+ if (core_pipe_limit && (core_pipe_limit < dump_count)) {
+ printk(KERN_WARNING "Pid %d(%s) over core_pipe_limit\n",
+ task_tgid_vnr(current), current->comm);
+ printk(KERN_WARNING "Skipping core dump\n");
+ goto fail_dropcount;
+ }
+
helper_argv = argv_split(GFP_KERNEL, corename+1, &helper_argc);
if (!helper_argv) {
printk(KERN_WARNING "%s failed to allocate memory\n",
__func__);
- goto fail_unlock;
- }
- /* Terminate the string before the first option */
- delimit = strchr(corename, ' ');
- if (delimit)
- *delimit = '\0';
- delimit = strrchr(helper_argv[0], '/');
- if (delimit)
- delimit++;
- else
- delimit = helper_argv[0];
- if (!strcmp(delimit, current->comm)) {
- printk(KERN_NOTICE "Recursive core dump detected, "
- "aborting\n");
- goto fail_unlock;
+ goto fail_dropcount;
}
core_limit = RLIM_INFINITY;
/* SIGPIPE can happen, but it's just never processed */
- if (call_usermodehelper_pipe(corename+1, helper_argv, NULL,
+ if (call_usermodehelper_pipe(helper_argv[0], helper_argv, NULL,
&file)) {
printk(KERN_INFO "Core dump to %s pipe failed\n",
corename);
- goto fail_unlock;
+ goto fail_dropcount;
}
} else
file = filp_open(corename,
O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag,
0600);
if (IS_ERR(file))
- goto fail_unlock;
+ goto fail_dropcount;
inode = file->f_path.dentry->d_inode;
if (inode->i_nlink > 1)
goto close_fail; /* multiple links - don't dump */
if (retval)
current->signal->group_exit_code |= 0x80;
close_fail:
+ if (ispipe && core_pipe_limit)
+ wait_for_dump_helpers(file);
filp_close(file, NULL);
+fail_dropcount:
+ if (dump_count)
+ atomic_dec(&core_dump_count);
fail_unlock:
if (helper_argv)
argv_free(helper_argv);
}
lock_super(sb);
- lock_kernel();
sbi = sb->s_fs_info;
fscb->s_nextid = cpu_to_le64(sbi->s_nextid);
fscb->s_numfiles = cpu_to_le32(sbi->s_numfiles);
out:
if (or)
osd_end_request(or);
- unlock_kernel();
unlock_super(sb);
kfree(fscb);
return ret;
int num_pend;
struct exofs_sb_info *sbi = sb->s_fs_info;
- lock_kernel();
-
if (sb->s_dirt)
exofs_write_super(sb);
osduld_put_device(sbi->s_dev);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
-
- unlock_kernel();
}
/*
.writepages = ext2_writepages,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
const struct address_space_operations ext2_aops_xip = {
.direct_IO = ext2_direct_IO,
.writepages = ext2_writepages,
.migratepage = buffer_migrate_page,
+ .error_remove_page = generic_error_remove_page,
};
/*
.direct_IO = ext3_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext3_writeback_aops = {
.direct_IO = ext3_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext3_journalled_aops = {
.invalidatepage = ext3_invalidatepage,
.releasepage = ext3_releasepage,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
void ext3_set_aops(struct inode *inode)
.direct_IO = ext4_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext4_writeback_aops = {
.direct_IO = ext4_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext4_journalled_aops = {
.invalidatepage = ext4_invalidatepage,
.releasepage = ext4_releasepage,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext4_da_aops = {
.direct_IO = ext4_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
void ext4_set_aops(struct inode *inode)
iput(sbi->fat_inode);
- if (sbi->nls_disk) {
- unload_nls(sbi->nls_disk);
- sbi->nls_disk = NULL;
- sbi->options.codepage = fat_default_codepage;
- }
- if (sbi->nls_io) {
- unload_nls(sbi->nls_io);
- sbi->nls_io = NULL;
- }
- if (sbi->options.iocharset != fat_default_iocharset) {
+ unload_nls(sbi->nls_disk);
+ unload_nls(sbi->nls_io);
+
+ if (sbi->options.iocharset != fat_default_iocharset)
kfree(sbi->options.iocharset);
- sbi->options.iocharset = fat_default_iocharset;
- }
sb->s_fs_info = NULL;
kfree(sbi);
return pid;
}
+static int f_setown_ex(struct file *filp, unsigned long arg)
+{
+ struct f_owner_ex * __user owner_p = (void * __user)arg;
+ struct f_owner_ex owner;
+ struct pid *pid;
+ int type;
+ int ret;
+
+ ret = copy_from_user(&owner, owner_p, sizeof(owner));
+ if (ret)
+ return ret;
+
+ switch (owner.type) {
+ case F_OWNER_TID:
+ type = PIDTYPE_MAX;
+ break;
+
+ case F_OWNER_PID:
+ type = PIDTYPE_PID;
+ break;
+
+ case F_OWNER_GID:
+ type = PIDTYPE_PGID;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ rcu_read_lock();
+ pid = find_vpid(owner.pid);
+ if (owner.pid && !pid)
+ ret = -ESRCH;
+ else
+ ret = __f_setown(filp, pid, type, 1);
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static int f_getown_ex(struct file *filp, unsigned long arg)
+{
+ struct f_owner_ex * __user owner_p = (void * __user)arg;
+ struct f_owner_ex owner;
+ int ret = 0;
+
+ read_lock(&filp->f_owner.lock);
+ owner.pid = pid_vnr(filp->f_owner.pid);
+ switch (filp->f_owner.pid_type) {
+ case PIDTYPE_MAX:
+ owner.type = F_OWNER_TID;
+ break;
+
+ case PIDTYPE_PID:
+ owner.type = F_OWNER_PID;
+ break;
+
+ case PIDTYPE_PGID:
+ owner.type = F_OWNER_GID;
+ break;
+
+ default:
+ WARN_ON(1);
+ ret = -EINVAL;
+ break;
+ }
+ read_unlock(&filp->f_owner.lock);
+
+ if (!ret)
+ ret = copy_to_user(owner_p, &owner, sizeof(owner));
+ return ret;
+}
+
static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
struct file *filp)
{
case F_SETOWN:
err = f_setown(filp, arg, 1);
break;
+ case F_GETOWN_EX:
+ err = f_getown_ex(filp, arg);
+ break;
+ case F_SETOWN_EX:
+ err = f_setown_ex(filp, arg);
+ break;
case F_GETSIG:
err = filp->f_owner.signum;
break;
static void send_sigio_to_task(struct task_struct *p,
struct fown_struct *fown,
- int fd,
- int reason)
+ int fd, int reason, int group)
{
/*
* F_SETSIG can change ->signum lockless in parallel, make
else
si.si_band = band_table[reason - POLL_IN];
si.si_fd = fd;
- if (!group_send_sig_info(signum, &si, p))
+ if (!do_send_sig_info(signum, &si, p, group))
break;
/* fall-through: fall back on the old plain SIGIO signal */
case 0:
- group_send_sig_info(SIGIO, SEND_SIG_PRIV, p);
+ do_send_sig_info(SIGIO, SEND_SIG_PRIV, p, group);
}
}
struct task_struct *p;
enum pid_type type;
struct pid *pid;
+ int group = 1;
read_lock(&fown->lock);
+
type = fown->pid_type;
+ if (type == PIDTYPE_MAX) {
+ group = 0;
+ type = PIDTYPE_PID;
+ }
+
pid = fown->pid;
if (!pid)
goto out_unlock_fown;
read_lock(&tasklist_lock);
do_each_pid_task(pid, type, p) {
- send_sigio_to_task(p, fown, fd, band);
+ send_sigio_to_task(p, fown, fd, band, group);
} while_each_pid_task(pid, type, p);
read_unlock(&tasklist_lock);
out_unlock_fown:
}
static void send_sigurg_to_task(struct task_struct *p,
- struct fown_struct *fown)
+ struct fown_struct *fown, int group)
{
if (sigio_perm(p, fown, SIGURG))
- group_send_sig_info(SIGURG, SEND_SIG_PRIV, p);
+ do_send_sig_info(SIGURG, SEND_SIG_PRIV, p, group);
}
int send_sigurg(struct fown_struct *fown)
struct task_struct *p;
enum pid_type type;
struct pid *pid;
+ int group = 1;
int ret = 0;
read_lock(&fown->lock);
+
type = fown->pid_type;
+ if (type == PIDTYPE_MAX) {
+ group = 0;
+ type = PIDTYPE_PID;
+ }
+
pid = fown->pid;
if (!pid)
goto out_unlock_fown;
read_lock(&tasklist_lock);
do_each_pid_task(pid, type, p) {
- send_sigurg_to_task(p, fown);
+ send_sigurg_to_task(p, fown, group);
} while_each_pid_task(pid, type, p);
read_unlock(&tasklist_lock);
out_unlock_fown:
* Handle nr_files sysctl
*/
#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
-int proc_nr_files(ctl_table *table, int write, struct file *filp,
+int proc_nr_files(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
files_stat.nr_files = get_nr_files();
- return proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(table, write, buffer, lenp, ppos);
}
#else
-int proc_nr_files(ctl_table *table, int write, struct file *filp,
+int proc_nr_files(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
long nr_pages;
struct super_block *sb;
enum writeback_sync_modes sync_mode;
- int for_kupdate;
- int range_cyclic;
+ int for_kupdate:1;
+ int range_cyclic:1;
+ int for_background:1;
};
/*
* completion. Caller need not hold sb s_umount semaphore.
*
*/
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+ long nr_pages)
{
struct wb_writeback_args args = {
+ .sb = sb,
.sync_mode = WB_SYNC_NONE,
.nr_pages = nr_pages,
.range_cyclic = 1,
};
+ /*
+ * We treat @nr_pages=0 as the special case to do background writeback,
+ * ie. to sync pages until the background dirty threshold is reached.
+ */
+ if (!nr_pages) {
+ args.nr_pages = LONG_MAX;
+ args.for_background = 1;
+ }
+
bdi_alloc_queue_work(bdi, &args);
}
* For inodes being constantly redirtied, dirtied_when can get stuck.
* It _appears_ to be in the future, but is actually in distant past.
* This test is necessary to prevent such wrapped-around relative times
- * from permanently stopping the whole pdflush writeback.
+ * from permanently stopping the whole bdi writeback.
*/
ret = ret && time_before_eq(inode->dirtied_when, jiffies);
#endif
struct list_head *dispatch_queue,
unsigned long *older_than_this)
{
+ LIST_HEAD(tmp);
+ struct list_head *pos, *node;
+ struct super_block *sb = NULL;
+ struct inode *inode;
+ int do_sb_sort = 0;
+
while (!list_empty(delaying_queue)) {
- struct inode *inode = list_entry(delaying_queue->prev,
- struct inode, i_list);
+ inode = list_entry(delaying_queue->prev, struct inode, i_list);
if (older_than_this &&
inode_dirtied_after(inode, *older_than_this))
break;
- list_move(&inode->i_list, dispatch_queue);
+ if (sb && sb != inode->i_sb)
+ do_sb_sort = 1;
+ sb = inode->i_sb;
+ list_move(&inode->i_list, &tmp);
+ }
+
+ /* just one sb in list, splice to dispatch_queue and we're done */
+ if (!do_sb_sort) {
+ list_splice(&tmp, dispatch_queue);
+ return;
+ }
+
+ /* Move inodes from one superblock together */
+ while (!list_empty(&tmp)) {
+ inode = list_entry(tmp.prev, struct inode, i_list);
+ sb = inode->i_sb;
+ list_for_each_prev_safe(pos, node, &tmp) {
+ inode = list_entry(pos, struct inode, i_list);
+ if (inode->i_sb == sb)
+ list_move(&inode->i_list, dispatch_queue);
+ }
}
}
spin_lock(&inode_lock);
inode->i_state &= ~I_SYNC;
if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
- if (!(inode->i_state & I_DIRTY) &&
- mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+ if ((inode->i_state & I_DIRTY_PAGES) && wbc->for_kupdate) {
+ /*
+ * More pages get dirtied by a fast dirtier.
+ */
+ goto select_queue;
+ } else if (inode->i_state & I_DIRTY) {
+ /*
+ * At least XFS will redirty the inode during the
+ * writeback (delalloc) and on io completion (isize).
+ */
+ redirty_tail(inode);
+ } else if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
/*
* We didn't write back all the pages. nfs_writepages()
* sometimes bales out without doing anything. Redirty
* soon as the queue becomes uncongested.
*/
inode->i_state |= I_DIRTY_PAGES;
+select_queue:
if (wbc->nr_to_write <= 0) {
/*
* slice used up: queue for next turn
inode->i_state |= I_DIRTY_PAGES;
redirty_tail(inode);
}
- } else if (inode->i_state & I_DIRTY) {
- /*
- * Someone redirtied the inode while were writing back
- * the pages.
- */
- redirty_tail(inode);
} else if (atomic_read(&inode->i_count)) {
/*
* The inode is clean, inuse
return ret;
}
+static void unpin_sb_for_writeback(struct super_block **psb)
+{
+ struct super_block *sb = *psb;
+
+ if (sb) {
+ up_read(&sb->s_umount);
+ put_super(sb);
+ *psb = NULL;
+ }
+}
+
/*
* For WB_SYNC_NONE writeback, the caller does not have the sb pinned
* before calling writeback. So make sure that we do pin it, so it doesn't
* 1 if we failed.
*/
static int pin_sb_for_writeback(struct writeback_control *wbc,
- struct inode *inode)
+ struct inode *inode, struct super_block **psb)
{
struct super_block *sb = inode->i_sb;
+ /*
+ * If this sb is already pinned, nothing more to do. If not and
+ * *psb is non-NULL, unpin the old one first
+ */
+ if (sb == *psb)
+ return 0;
+ else if (*psb)
+ unpin_sb_for_writeback(psb);
+
/*
* Caller must already hold the ref for this
*/
if (down_read_trylock(&sb->s_umount)) {
if (sb->s_root) {
spin_unlock(&sb_lock);
- return 0;
+ goto pinned;
}
/*
* umounted, drop rwsem again and fall through to failure
sb->s_count--;
spin_unlock(&sb_lock);
return 1;
-}
-
-static void unpin_sb_for_writeback(struct writeback_control *wbc,
- struct inode *inode)
-{
- struct super_block *sb = inode->i_sb;
-
- if (wbc->sync_mode == WB_SYNC_ALL)
- return;
-
- up_read(&sb->s_umount);
- put_super(sb);
+pinned:
+ *psb = sb;
+ return 0;
}
static void writeback_inodes_wb(struct bdi_writeback *wb,
struct writeback_control *wbc)
{
- struct super_block *sb = wbc->sb;
+ struct super_block *sb = wbc->sb, *pin_sb = NULL;
const int is_blkdev_sb = sb_is_blkdev_sb(sb);
const unsigned long start = jiffies; /* livelock avoidance */
if (inode_dirtied_after(inode, start))
break;
- if (pin_sb_for_writeback(wbc, inode)) {
+ if (pin_sb_for_writeback(wbc, inode, &pin_sb)) {
requeue_io(inode);
continue;
}
__iget(inode);
pages_skipped = wbc->pages_skipped;
writeback_single_inode(inode, wbc);
- unpin_sb_for_writeback(wbc, inode);
if (wbc->pages_skipped != pages_skipped) {
/*
* writeback is not making progress due to locked
wbc->more_io = 1;
}
+ unpin_sb_for_writeback(&pin_sb);
+
spin_unlock(&inode_lock);
/* Leave any unwritten inodes on b_io */
}
};
unsigned long oldest_jif;
long wrote = 0;
+ struct inode *inode;
if (wbc.for_kupdate) {
wbc.older_than_this = &oldest_jif;
for (;;) {
/*
- * Don't flush anything for non-integrity writeback where
- * no nr_pages was given
+ * Stop writeback when nr_pages has been consumed
*/
- if (!args->for_kupdate && args->nr_pages <= 0 &&
- args->sync_mode == WB_SYNC_NONE)
+ if (args->nr_pages <= 0)
break;
/*
- * If no specific pages were given and this is just a
- * periodic background writeout and we are below the
- * background dirty threshold, don't do anything
+ * For background writeout, stop when we are below the
+ * background dirty threshold
*/
- if (args->for_kupdate && args->nr_pages <= 0 &&
- !over_bground_thresh())
+ if (args->for_background && !over_bground_thresh())
break;
wbc.more_io = 0;
wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
/*
- * If we ran out of stuff to write, bail unless more_io got set
+ * If we consumed everything, see if we have more
*/
- if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
- if (wbc.more_io && !wbc.for_kupdate)
- continue;
+ if (wbc.nr_to_write <= 0)
+ continue;
+ /*
+ * Didn't write everything and we don't have more IO, bail
+ */
+ if (!wbc.more_io)
break;
+ /*
+ * Did we write something? Try for more
+ */
+ if (wbc.nr_to_write < MAX_WRITEBACK_PAGES)
+ continue;
+ /*
+ * Nothing written. Wait for some inode to
+ * become available for writeback. Otherwise
+ * we'll just busyloop.
+ */
+ spin_lock(&inode_lock);
+ if (!list_empty(&wb->b_more_io)) {
+ inode = list_entry(wb->b_more_io.prev,
+ struct inode, i_list);
+ inode_wait_for_writeback(inode);
}
+ spin_unlock(&inode_lock);
}
return wrote;
* If older_than_this is non-NULL, then only write out inodes which
* had their first dirtying at a time earlier than *older_than_this.
*
- * If we're a pdlfush thread, then implement pdflush collision avoidance
- * against the entire list.
- *
* If `bdi' is non-zero then we're being asked to writeback a specific queue.
* This function assumes that the blockdev superblock's inodes are backed by
* a variety of queues, so all inodes are searched. For other superblocks,
nr_to_write = nr_dirty + nr_unstable +
(inodes_stat.nr_inodes - inodes_stat.nr_unused);
- bdi_writeback_all(sb, nr_to_write);
+ bdi_start_writeback(sb->s_bdi, sb, nr_to_write);
}
EXPORT_SYMBOL(writeback_inodes_sb);
return 0;
if (attr->ia_valid & ATTR_SIZE) {
- unsigned long limit;
- if (IS_SWAPFILE(inode))
- return -ETXTBSY;
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && attr->ia_size > (loff_t) limit) {
- send_sig(SIGXFSZ, current, 0);
- return -EFBIG;
- }
+ err = inode_newsize_ok(inode, attr->ia_size);
+ if (err)
+ return err;
is_truncate = true;
}
* FUSE_NOWRITE, otherwise fuse_launder_page() would deadlock.
*/
if (S_ISREG(inode->i_mode) && oldsize != outarg.attr.size) {
- if (outarg.attr.size < oldsize)
- fuse_truncate(inode->i_mapping, outarg.attr.size);
+ truncate_pagecache(inode, oldsize, outarg.attr.size);
invalidate_inode_pages2(inode->i_mapping);
}
void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
u64 attr_valid);
-void fuse_truncate(struct address_space *mapping, loff_t offset);
-
/**
* Initialize the client device
*/
return 0;
}
-void fuse_truncate(struct address_space *mapping, loff_t offset)
-{
- /* See vmtruncate() */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
-}
-
void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
u64 attr_valid)
{
spin_unlock(&fc->lock);
if (S_ISREG(inode->i_mode) && oldsize != attr->size) {
- if (attr->size < oldsize)
- fuse_truncate(inode->i_mapping, attr->size);
+ truncate_pagecache(inode, oldsize, attr->size);
invalidate_inode_pages2(inode->i_mapping);
}
}
.direct_IO = gfs2_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations gfs2_ordered_aops = {
.direct_IO = gfs2_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations gfs2_jdata_aops = {
.invalidatepage = gfs2_invalidatepage,
.releasepage = gfs2_releasepage,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
void gfs2_set_aops(struct inode *inode)
#include <linux/completion.h>
#include <linux/buffer_head.h>
#include <linux/namei.h>
-#include <linux/utsname.h>
#include <linux/mm.h>
#include <linux/xattr.h>
#include <linux/posix_acl.h>
brelse(HFS_SB(sb)->mdb_bh);
brelse(HFS_SB(sb)->alt_mdb_bh);
- if (HFS_SB(sb)->nls_io)
- unload_nls(HFS_SB(sb)->nls_io);
- if (HFS_SB(sb)->nls_disk)
- unload_nls(HFS_SB(sb)->nls_disk);
+ unload_nls(HFS_SB(sb)->nls_io);
+ unload_nls(HFS_SB(sb)->nls_disk);
free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0);
kfree(HFS_SB(sb));
iput(HFSPLUS_SB(sb).alloc_file);
iput(HFSPLUS_SB(sb).hidden_dir);
brelse(HFSPLUS_SB(sb).s_vhbh);
- if (HFSPLUS_SB(sb).nls)
- unload_nls(HFSPLUS_SB(sb).nls);
+ unload_nls(HFSPLUS_SB(sb).nls);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
cleanup:
hfsplus_put_super(sb);
- if (nls)
- unload_nls(nls);
+ unload_nls(nls);
return err;
}
static void hugetlbfs_forget_inode(struct inode *inode) __releases(inode_lock)
{
- struct super_block *sb = inode->i_sb;
-
- if (!hlist_unhashed(&inode->i_hash)) {
- if (!(inode->i_state & (I_DIRTY|I_SYNC)))
- list_move(&inode->i_list, &inode_unused);
- inodes_stat.nr_unused++;
- if (!sb || (sb->s_flags & MS_ACTIVE)) {
- spin_unlock(&inode_lock);
- return;
- }
- inode->i_state |= I_WILL_FREE;
- spin_unlock(&inode_lock);
- /*
- * write_inode_now is a noop as we set BDI_CAP_NO_WRITEBACK
- * in our backing_dev_info.
- */
- write_inode_now(inode, 1);
- spin_lock(&inode_lock);
- inode->i_state &= ~I_WILL_FREE;
- inodes_stat.nr_unused--;
- hlist_del_init(&inode->i_hash);
+ if (generic_detach_inode(inode)) {
+ truncate_hugepages(inode, 0);
+ clear_inode(inode);
+ destroy_inode(inode);
}
- list_del_init(&inode->i_list);
- list_del_init(&inode->i_sb_list);
- inode->i_state |= I_FREEING;
- inodes_stat.nr_inodes--;
- spin_unlock(&inode_lock);
- truncate_hugepages(inode, 0);
- clear_inode(inode);
- destroy_inode(inode);
}
static void hugetlbfs_drop_inode(struct inode *inode)
static struct vfsmount *hugetlbfs_vfsmount;
-static int can_do_hugetlb_shm(int creat_flags)
+static int can_do_hugetlb_shm(void)
{
- if (creat_flags != HUGETLB_SHMFS_INODE)
- return 0;
- if (capable(CAP_IPC_LOCK))
- return 1;
- if (in_group_p(sysctl_hugetlb_shm_group))
- return 1;
- return 0;
+ return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
}
struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
if (!hugetlbfs_vfsmount)
return ERR_PTR(-ENOENT);
- if (!can_do_hugetlb_shm(creat_flags)) {
+ if (creat_flags == HUGETLB_SHMFS_INODE && !can_do_hugetlb_shm()) {
*user = current_user();
if (user_shm_lock(size, *user)) {
WARN_ONCE(1,
}
EXPORT_SYMBOL(generic_delete_inode);
-static void generic_forget_inode(struct inode *inode)
+/**
+ * generic_detach_inode - remove inode from inode lists
+ * @inode: inode to remove
+ *
+ * Remove inode from inode lists, write it if it's dirty. This is just an
+ * internal VFS helper exported for hugetlbfs. Do not use!
+ *
+ * Returns 1 if inode should be completely destroyed.
+ */
+int generic_detach_inode(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
inodes_stat.nr_unused++;
if (sb->s_flags & MS_ACTIVE) {
spin_unlock(&inode_lock);
- return;
+ return 0;
}
WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_WILL_FREE;
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(generic_detach_inode);
+
+static void generic_forget_inode(struct inode *inode)
+{
+ if (!generic_detach_inode(inode))
+ return;
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
clear_inode(inode);
struct inode *inode = dentry->d_inode;
struct timespec now;
- if (mnt_want_write(mnt))
- return;
if (inode->i_flags & S_NOATIME)
- goto out;
+ return;
if (IS_NOATIME(inode))
- goto out;
+ return;
if ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))
- goto out;
+ return;
if (mnt->mnt_flags & MNT_NOATIME)
- goto out;
+ return;
if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))
- goto out;
+ return;
now = current_fs_time(inode->i_sb);
if (!relatime_need_update(mnt, inode, now))
- goto out;
+ return;
if (timespec_equal(&inode->i_atime, &now))
- goto out;
+ return;
+
+ if (mnt_want_write(mnt))
+ return;
inode->i_atime = now;
mark_inode_dirty_sync(inode);
-out:
mnt_drop_write(mnt);
}
EXPORT_SYMBOL(touch_atime);
{
struct inode *inode = file->f_path.dentry->d_inode;
struct timespec now;
- int sync_it = 0;
- int err;
+ enum { S_MTIME = 1, S_CTIME = 2, S_VERSION = 4 } sync_it = 0;
+ /* First try to exhaust all avenues to not sync */
if (IS_NOCMTIME(inode))
return;
- err = mnt_want_write_file(file);
- if (err)
- return;
-
now = current_fs_time(inode->i_sb);
- if (!timespec_equal(&inode->i_mtime, &now)) {
- inode->i_mtime = now;
- sync_it = 1;
- }
+ if (!timespec_equal(&inode->i_mtime, &now))
+ sync_it = S_MTIME;
- if (!timespec_equal(&inode->i_ctime, &now)) {
- inode->i_ctime = now;
- sync_it = 1;
- }
+ if (!timespec_equal(&inode->i_ctime, &now))
+ sync_it |= S_CTIME;
- if (IS_I_VERSION(inode)) {
- inode_inc_iversion(inode);
- sync_it = 1;
- }
+ if (IS_I_VERSION(inode))
+ sync_it |= S_VERSION;
+
+ if (!sync_it)
+ return;
- if (sync_it)
- mark_inode_dirty_sync(inode);
+ /* Finally allowed to write? Takes lock. */
+ if (mnt_want_write_file(file))
+ return;
+
+ /* Only change inode inside the lock region */
+ if (sync_it & S_VERSION)
+ inode_inc_iversion(inode);
+ if (sync_it & S_CTIME)
+ inode->i_ctime = now;
+ if (sync_it & S_MTIME)
+ inode->i_mtime = now;
+ mark_inode_dirty_sync(inode);
mnt_drop_write(file->f_path.mnt);
}
EXPORT_SYMBOL(file_update_time);
else if (S_ISSOCK(mode))
inode->i_fop = &bad_sock_fops;
else
- printk(KERN_DEBUG "init_special_inode: bogus i_mode (%o)\n",
- mode);
+ printk(KERN_DEBUG "init_special_inode: bogus i_mode (%o) for"
+ " inode %s:%lu\n", mode, inode->i_sb->s_id,
+ inode->i_ino);
}
EXPORT_SYMBOL(init_special_inode);
* namespace.c
*/
extern int copy_mount_options(const void __user *, unsigned long *);
+extern int copy_mount_string(const void __user *, char **);
extern void free_vfsmnt(struct vfsmount *);
extern struct vfsmount *alloc_vfsmnt(const char *);
static int fiemap_check_ranges(struct super_block *sb,
u64 start, u64 len, u64 *new_len)
{
+ u64 maxbytes = (u64) sb->s_maxbytes;
+
*new_len = len;
if (len == 0)
return -EINVAL;
- if (start > sb->s_maxbytes)
+ if (start > maxbytes)
return -EFBIG;
/*
* Shrink request scope to what the fs can actually handle.
*/
- if ((len > sb->s_maxbytes) ||
- (sb->s_maxbytes - len) < start)
- *new_len = sb->s_maxbytes - start;
+ if (len > maxbytes || (maxbytes - len) < start)
+ *new_len = maxbytes - start;
return 0;
}
#ifdef CONFIG_JOLIET
lock_kernel();
- if (sbi->s_nls_iocharset) {
- unload_nls(sbi->s_nls_iocharset);
- sbi->s_nls_iocharset = NULL;
- }
+ unload_nls(sbi->s_nls_iocharset);
unlock_kernel();
#endif
printk(KERN_WARNING "%s: get root inode failed\n", __func__);
out_no_inode:
#ifdef CONFIG_JOLIET
- if (sbi->s_nls_iocharset)
- unload_nls(sbi->s_nls_iocharset);
+ unload_nls(sbi->s_nls_iocharset);
#endif
goto out_freesbi;
out_no_read:
rc = jfs_umount(sb);
if (rc)
jfs_err("jfs_umount failed with return code %d", rc);
- if (sbi->nls_tab)
- unload_nls(sbi->nls_tab);
- sbi->nls_tab = NULL;
+
+ unload_nls(sbi->nls_tab);
truncate_inode_pages(sbi->direct_inode->i_mapping, 0);
iput(sbi->direct_inode);
- sbi->direct_inode = NULL;
kfree(sbi);
if (nls_map != (void *) -1) {
/* Discard old (if remount) */
- if (sbi->nls_tab)
- unload_nls(sbi->nls_tab);
+ unload_nls(sbi->nls_tab);
sbi->nls_tab = nls_map;
}
return 1;
const void *from, size_t available)
{
loff_t pos = *ppos;
+ size_t ret;
+
if (pos < 0)
return -EINVAL;
- if (pos >= available)
+ if (pos >= available || !count)
return 0;
if (count > available - pos)
count = available - pos;
- if (copy_to_user(to, from + pos, count))
+ ret = copy_to_user(to, from + pos, count);
+ if (ret == count)
return -EFAULT;
+ count -= ret;
*ppos = pos + count;
return count;
}
if (copy_from_user(attr->set_buf, buf, size))
goto out;
- ret = len; /* claim we got the whole input */
attr->set_buf[size] = '\0';
val = simple_strtol(attr->set_buf, NULL, 0);
- attr->set(attr->data, val);
+ ret = attr->set(attr->data, val);
+ if (ret == 0)
+ ret = len; /* on success, claim we got the whole input */
out:
mutex_unlock(&attr->mutex);
return ret;
#include <linux/types.h>
#include <linux/sched.h>
-#include <linux/utsname.h>
#include <linux/nfs.h>
#include <linux/sunrpc/xdr.h>
#include <linux/types.h>
#include <linux/sched.h>
-#include <linux/utsname.h>
#include <linux/nfs.h>
#include <linux/sunrpc/xdr.h>
{
struct vfsmount *mnt;
- if (!type || !memchr(type, 0, PAGE_SIZE))
+ if (!type)
return -EINVAL;
/* we need capabilities... */
return 0;
}
+int copy_mount_string(const void __user *data, char **where)
+{
+ char *tmp;
+
+ if (!data) {
+ *where = NULL;
+ return 0;
+ }
+
+ tmp = strndup_user(data, PAGE_SIZE);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+
+ *where = tmp;
+ return 0;
+}
+
/*
* Flags is a 32-bit value that allows up to 31 non-fs dependent flags to
* be given to the mount() call (ie: read-only, no-dev, no-suid etc).
if (!dir_name || !*dir_name || !memchr(dir_name, 0, PAGE_SIZE))
return -EINVAL;
- if (dev_name && !memchr(dev_name, 0, PAGE_SIZE))
- return -EINVAL;
if (data_page)
((char *)data_page)[PAGE_SIZE - 1] = 0;
SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
char __user *, type, unsigned long, flags, void __user *, data)
{
- int retval;
+ int ret;
+ char *kernel_type;
+ char *kernel_dir;
+ char *kernel_dev;
unsigned long data_page;
- unsigned long type_page;
- unsigned long dev_page;
- char *dir_page;
- retval = copy_mount_options(type, &type_page);
- if (retval < 0)
- return retval;
+ ret = copy_mount_string(type, &kernel_type);
+ if (ret < 0)
+ goto out_type;
- dir_page = getname(dir_name);
- retval = PTR_ERR(dir_page);
- if (IS_ERR(dir_page))
- goto out1;
+ kernel_dir = getname(dir_name);
+ if (IS_ERR(kernel_dir)) {
+ ret = PTR_ERR(kernel_dir);
+ goto out_dir;
+ }
- retval = copy_mount_options(dev_name, &dev_page);
- if (retval < 0)
- goto out2;
+ ret = copy_mount_string(dev_name, &kernel_dev);
+ if (ret < 0)
+ goto out_dev;
- retval = copy_mount_options(data, &data_page);
- if (retval < 0)
- goto out3;
+ ret = copy_mount_options(data, &data_page);
+ if (ret < 0)
+ goto out_data;
- retval = do_mount((char *)dev_page, dir_page, (char *)type_page,
- flags, (void *)data_page);
- free_page(data_page);
+ ret = do_mount(kernel_dev, kernel_dir, kernel_type, flags,
+ (void *) data_page);
-out3:
- free_page(dev_page);
-out2:
- putname(dir_page);
-out1:
- free_page(type_page);
- return retval;
+ free_page(data_page);
+out_data:
+ kfree(kernel_dev);
+out_dev:
+ putname(kernel_dir);
+out_dir:
+ kfree(kernel_type);
+out_type:
+ return ret;
}
/*
#ifdef CONFIG_NCPFS_NLS
/* unload the NLS charsets */
- if (server->nls_vol)
- {
- unload_nls(server->nls_vol);
- server->nls_vol = NULL;
- }
- if (server->nls_io)
- {
- unload_nls(server->nls_io);
- server->nls_io = NULL;
- }
+ unload_nls(server->nls_vol);
+ unload_nls(server->nls_io);
#endif /* CONFIG_NCPFS_NLS */
if (server->info_filp)
oldset_io = server->nls_io;
server->nls_io = iocharset;
- if (oldset_cp)
- unload_nls(oldset_cp);
- if (oldset_io)
- unload_nls(oldset_io);
+ unload_nls(oldset_cp);
+ unload_nls(oldset_io);
return 0;
}
.hostname = clp->cl_hostname,
.address = (struct sockaddr *)&clp->cl_addr,
.addrlen = clp->cl_addrlen,
- .protocol = server->flags & NFS_MOUNT_TCP ?
- IPPROTO_TCP : IPPROTO_UDP,
.nfs_version = clp->rpc_ops->version,
.noresvport = server->flags & NFS_MOUNT_NORESVPORT ?
1 : 0,
if (server->flags & NFS_MOUNT_NONLM)
return 0;
+ switch (clp->cl_proto) {
+ default:
+ nlm_init.protocol = IPPROTO_TCP;
+ break;
+ case XPRT_TRANSPORT_UDP:
+ nlm_init.protocol = IPPROTO_UDP;
+ }
+
host = nlmclnt_init(&nlm_init);
if (IS_ERR(host))
return PTR_ERR(host);
dprintk("--> nfs_init_server()\n");
#ifdef CONFIG_NFS_V3
- if (data->flags & NFS_MOUNT_VER3)
+ if (data->version == 3)
cl_init.rpc_ops = &nfs_v3_clientops;
#endif
target->acdirmin = source->acdirmin;
target->acdirmax = source->acdirmax;
target->caps = source->caps;
+ target->options = source->options;
}
/*
.direct_IO = nfs_direct_IO,
.migratepage = nfs_migrate_page,
.launder_page = nfs_launder_page,
+ .error_remove_page = generic_error_remove_page,
};
/*
/*
* Get the cache cookie for an NFS superblock. We have to handle
* uniquification here because the cache doesn't do it for us.
+ *
+ * The default uniquifier is just an empty string, but it may be overridden
+ * either by the 'fsc=xxx' option to mount, or by inheriting it from the parent
+ * superblock across an automount point of some nature.
*/
-void nfs_fscache_get_super_cookie(struct super_block *sb,
- struct nfs_parsed_mount_data *data)
+void nfs_fscache_get_super_cookie(struct super_block *sb, const char *uniq,
+ struct nfs_clone_mount *mntdata)
{
struct nfs_fscache_key *key, *xkey;
struct nfs_server *nfss = NFS_SB(sb);
struct rb_node **p, *parent;
- const char *uniq = data->fscache_uniq ?: "";
int diff, ulen;
- ulen = strlen(uniq);
+ if (uniq) {
+ ulen = strlen(uniq);
+ } else if (mntdata) {
+ struct nfs_server *mnt_s = NFS_SB(mntdata->sb);
+ if (mnt_s->fscache_key) {
+ uniq = mnt_s->fscache_key->key.uniquifier;
+ ulen = mnt_s->fscache_key->key.uniq_len;
+ }
+ }
+
+ if (!uniq) {
+ uniq = "";
+ ulen = 1;
+ }
+
key = kzalloc(sizeof(*key) + ulen, GFP_KERNEL);
if (!key)
return;
extern void nfs_fscache_release_client_cookie(struct nfs_client *);
extern void nfs_fscache_get_super_cookie(struct super_block *,
- struct nfs_parsed_mount_data *);
+ const char *,
+ struct nfs_clone_mount *);
extern void nfs_fscache_release_super_cookie(struct super_block *);
extern void nfs_fscache_init_inode_cookie(struct inode *);
static inline void nfs_fscache_get_super_cookie(
struct super_block *sb,
- struct nfs_parsed_mount_data *data)
+ const char *uniq,
+ struct nfs_clone_mount *mntdata)
{
}
static inline void nfs_fscache_release_super_cookie(struct super_block *sb) {}
*/
static int nfs_vmtruncate(struct inode * inode, loff_t offset)
{
- if (i_size_read(inode) < offset) {
- unsigned long limit;
-
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit)
- goto out_sig;
- if (offset > inode->i_sb->s_maxbytes)
- goto out_big;
- spin_lock(&inode->i_lock);
- i_size_write(inode, offset);
- spin_unlock(&inode->i_lock);
- } else {
- struct address_space *mapping = inode->i_mapping;
+ loff_t oldsize;
+ int err;
- /*
- * truncation of in-use swapfiles is disallowed - it would
- * cause subsequent swapout to scribble on the now-freed
- * blocks.
- */
- if (IS_SWAPFILE(inode))
- return -ETXTBSY;
- spin_lock(&inode->i_lock);
- i_size_write(inode, offset);
- spin_unlock(&inode->i_lock);
+ err = inode_newsize_ok(inode, offset);
+ if (err)
+ goto out;
- /*
- * unmap_mapping_range is called twice, first simply for
- * efficiency so that truncate_inode_pages does fewer
- * single-page unmaps. However after this first call, and
- * before truncate_inode_pages finishes, it is possible for
- * private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second
- * unmap_mapping_range call must be made for correctness.
- */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- }
- return 0;
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out_big:
- return -EFBIG;
+ spin_lock(&inode->i_lock);
+ oldsize = inode->i_size;
+ i_size_write(inode, offset);
+ spin_unlock(&inode->i_lock);
+
+ truncate_pagecache(inode, oldsize, offset);
+out:
+ return err;
}
/**
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
*/
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/sunrpc/clnt.h>
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
*/
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
unlock_kernel();
}
+static struct nfs_parsed_mount_data *nfs_alloc_parsed_mount_data(int flags)
+{
+ struct nfs_parsed_mount_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data) {
+ data->flags = flags;
+ data->rsize = NFS_MAX_FILE_IO_SIZE;
+ data->wsize = NFS_MAX_FILE_IO_SIZE;
+ data->acregmin = NFS_DEF_ACREGMIN;
+ data->acregmax = NFS_DEF_ACREGMAX;
+ data->acdirmin = NFS_DEF_ACDIRMIN;
+ data->acdirmax = NFS_DEF_ACDIRMAX;
+ data->nfs_server.port = NFS_UNSPEC_PORT;
+ data->auth_flavors[0] = RPC_AUTH_UNIX;
+ data->auth_flavor_len = 1;
+ data->minorversion = 0;
+ }
+ return data;
+}
+
/*
* Sanity-check a server address provided by the mount command.
*
int status;
if (args->mount_server.version == 0) {
- if (args->flags & NFS_MOUNT_VER3)
- args->mount_server.version = NFS_MNT3_VERSION;
- else
- args->mount_server.version = NFS_MNT_VERSION;
+ switch (args->version) {
+ default:
+ args->mount_server.version = NFS_MNT3_VERSION;
+ break;
+ case 2:
+ args->mount_server.version = NFS_MNT_VERSION;
+ }
}
request.version = args->mount_server.version;
if (data == NULL)
goto out_no_data;
- args->flags = (NFS_MOUNT_VER3 | NFS_MOUNT_TCP);
- args->rsize = NFS_MAX_FILE_IO_SIZE;
- args->wsize = NFS_MAX_FILE_IO_SIZE;
- args->acregmin = NFS_DEF_ACREGMIN;
- args->acregmax = NFS_DEF_ACREGMAX;
- args->acdirmin = NFS_DEF_ACDIRMIN;
- args->acdirmax = NFS_DEF_ACDIRMAX;
- args->mount_server.port = NFS_UNSPEC_PORT;
- args->nfs_server.port = NFS_UNSPEC_PORT;
- args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
- args->auth_flavors[0] = RPC_AUTH_UNIX;
- args->auth_flavor_len = 1;
- args->minorversion = 0;
-
switch (data->version) {
case 1:
data->namlen = 0;
if (!(data->flags & NFS_MOUNT_TCP))
args->nfs_server.protocol = XPRT_TRANSPORT_UDP;
+ else
+ args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
/* N.B. caller will free nfs_server.hostname in all cases */
args->nfs_server.hostname = kstrdup(data->hostname, GFP_KERNEL);
args->namlen = data->namlen;
}
#ifndef CONFIG_NFS_V3
- if (args->flags & NFS_MOUNT_VER3)
+ if (args->version == 3)
goto out_v3_not_compiled;
#endif /* !CONFIG_NFS_V3 */
if (data->bsize)
sb->s_blocksize = nfs_block_size(data->bsize, &sb->s_blocksize_bits);
- if (server->flags & NFS_MOUNT_VER3) {
+ if (server->nfs_client->rpc_ops->version == 3) {
/* The VFS shouldn't apply the umask to mode bits. We will do
* so ourselves when necessary.
*/
sb->s_blocksize = old_sb->s_blocksize;
sb->s_maxbytes = old_sb->s_maxbytes;
- if (server->flags & NFS_MOUNT_VER3) {
+ if (server->nfs_client->rpc_ops->version == 3) {
/* The VFS shouldn't apply the umask to mode bits. We will do
* so ourselves when necessary.
*/
};
int error = -ENOMEM;
- data = kzalloc(sizeof(*data), GFP_KERNEL);
+ data = nfs_alloc_parsed_mount_data(NFS_MOUNT_VER3 | NFS_MOUNT_TCP);
mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
if (data == NULL || mntfh == NULL)
goto out_free_fh;
if (!s->s_root) {
/* initial superblock/root creation */
nfs_fill_super(s, data);
- nfs_fscache_get_super_cookie(s, data);
+ nfs_fscache_get_super_cookie(
+ s, data ? data->fscache_uniq : NULL, NULL);
}
mntroot = nfs_get_root(s, mntfh);
if (!s->s_root) {
/* initial superblock/root creation */
nfs_clone_super(s, data->sb);
+ nfs_fscache_get_super_cookie(s, NULL, data);
}
mntroot = nfs_get_root(s, data->fh);
if (data == NULL)
goto out_no_data;
- args->rsize = NFS_MAX_FILE_IO_SIZE;
- args->wsize = NFS_MAX_FILE_IO_SIZE;
- args->acregmin = NFS_DEF_ACREGMIN;
- args->acregmax = NFS_DEF_ACREGMAX;
- args->acdirmin = NFS_DEF_ACDIRMIN;
- args->acdirmax = NFS_DEF_ACDIRMAX;
- args->nfs_server.port = NFS_UNSPEC_PORT;
- args->auth_flavors[0] = RPC_AUTH_UNIX;
- args->auth_flavor_len = 1;
args->version = 4;
- args->minorversion = 0;
-
switch (data->version) {
case 1:
if (data->host_addrlen > sizeof(args->nfs_server.address))
if (!s->s_root) {
/* initial superblock/root creation */
nfs4_fill_super(s);
- nfs_fscache_get_super_cookie(s, data);
+ nfs_fscache_get_super_cookie(
+ s, data ? data->fscache_uniq : NULL, NULL);
}
mntroot = nfs4_get_root(s, mntfh);
struct nfs_parsed_mount_data *data;
int error = -ENOMEM;
- data = kzalloc(sizeof(*data), GFP_KERNEL);
+ data = nfs_alloc_parsed_mount_data(0);
if (data == NULL)
goto out_free_data;
if (!s->s_root) {
/* initial superblock/root creation */
nfs4_clone_super(s, data->sb);
+ nfs_fscache_get_super_cookie(s, NULL, data);
}
mntroot = nfs4_get_root(s, data->fh);
if (!s->s_root) {
/* initial superblock/root creation */
nfs4_fill_super(s);
+ nfs_fscache_get_super_cookie(s, NULL, data);
}
mntroot = nfs4_get_root(s, &mntfh);
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/sunrpc/clnt.h>
void unload_nls(struct nls_table *nls)
{
- module_put(nls->owner);
+ if (nls)
+ module_put(nls->owner);
}
static const wchar_t charset2uni[256] = {
.migratepage = buffer_migrate_page, /* Move a page cache page from
one physical page to an
other. */
+ .error_remove_page = generic_error_remove_page,
};
/**
.migratepage = buffer_migrate_page, /* Move a page cache page from
one physical page to an
other. */
+ .error_remove_page = generic_error_remove_page,
};
#ifdef NTFS_RW
v, old_nls->charset);
nls_map = old_nls;
} else /* nls_map */ {
- if (old_nls)
- unload_nls(old_nls);
+ unload_nls(old_nls);
}
} else if (!strcmp(p, "utf8")) {
bool val = false;
ntfs_free(vol->upcase);
vol->upcase = NULL;
}
- if (vol->nls_map) {
- unload_nls(vol->nls_map);
- vol->nls_map = NULL;
- }
+
+ unload_nls(vol->nls_map);
+
sb->s_fs_info = NULL;
kfree(vol);
.releasepage = ocfs2_releasepage,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/sysctl.h>
#include <linux/spinlock.h>
#include <linux/debugfs.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/random.h>
#include <linux/statfs.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
-#include <linux/utsname.h>
#include <linux/namei.h>
#define MLOG_MASK_PREFIX ML_NAMEI
p->nivcsw);
}
+#ifdef CONFIG_MMU
+
struct stack_stats {
struct vm_area_struct *vma;
unsigned long startpage;
mmput(mm);
}
}
+#else
+static void task_show_stack_usage(struct seq_file *m, struct task_struct *task)
+{
+}
+#endif /* CONFIG_MMU */
int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
"Committed_AS: %8lu kB\n"
"VmallocTotal: %8lu kB\n"
"VmallocUsed: %8lu kB\n"
- "VmallocChunk: %8lu kB\n",
+ "VmallocChunk: %8lu kB\n"
+#ifdef CONFIG_MEMORY_FAILURE
+ "HardwareCorrupted: %8lu kB\n"
+#endif
+ ,
K(i.totalram),
K(i.freeram),
K(i.bufferram),
(unsigned long)VMALLOC_TOTAL >> 10,
vmi.used >> 10,
vmi.largest_chunk >> 10
+#ifdef CONFIG_MEMORY_FAILURE
+ ,atomic_long_read(&mce_bad_pages) << (PAGE_SHIFT - 10)
+#endif
);
hugetlb_report_meminfo(m);
/* careful: calling conventions are nasty here */
res = count;
- error = table->proc_handler(table, write, filp, buf, &res, ppos);
+ error = table->proc_handler(table, write, buf, &res, ppos);
if (!error)
error = res;
out:
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/time.h>
+#include <linux/kernel_stat.h>
#include <asm/cputime.h>
static int uptime_proc_show(struct seq_file *m, void *v)
{
struct timespec uptime;
struct timespec idle;
- cputime_t idletime = cputime_add(init_task.utime, init_task.stime);
+ int i;
+ cputime_t idletime = cputime_zero;
+
+ for_each_possible_cpu(i)
+ idletime = cputime64_add(idletime, kstat_cpu(i).cpustat.idle);
do_posix_clock_monotonic_gettime(&uptime);
monotonic_to_bootbased(&uptime);
/* make various checks */
order = get_order(newsize);
if (unlikely(order >= MAX_ORDER))
- goto too_big;
+ return -EFBIG;
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && newsize > limit)
- goto fsize_exceeded;
-
- if (newsize > inode->i_sb->s_maxbytes)
- goto too_big;
+ ret = inode_newsize_ok(inode, newsize);
+ if (ret)
+ return ret;
i_size_write(inode, newsize);
return 0;
- fsize_exceeded:
- send_sig(SIGXFSZ, current, 0);
- too_big:
- return -EFBIG;
-
- add_error:
+add_error:
while (loop < npages)
__free_page(pages + loop++);
return ret;
max = min(in_inode->i_sb->s_maxbytes, out_inode->i_sb->s_maxbytes);
pos = *ppos;
- retval = -EINVAL;
- if (unlikely(pos < 0))
- goto fput_out;
if (unlikely(pos + count > max)) {
retval = -EOVERFLOW;
if (pos >= max)
pos = (ROMFH_SIZE + len + 1 + ROMFH_PAD) & ROMFH_MASK;
root = romfs_iget(sb, pos);
- if (!root)
+ if (IS_ERR(root))
goto error;
sb->s_root = d_alloc_root(root);
*/
int seq_path(struct seq_file *m, struct path *path, char *esc)
{
- if (m->count < m->size) {
- char *s = m->buf + m->count;
- char *p = d_path(path, s, m->size - m->count);
+ char *buf;
+ size_t size = seq_get_buf(m, &buf);
+ int res = -1;
+
+ if (size) {
+ char *p = d_path(path, buf, size);
if (!IS_ERR(p)) {
- s = mangle_path(s, p, esc);
- if (s) {
- p = m->buf + m->count;
- m->count = s - m->buf;
- return s - p;
- }
+ char *end = mangle_path(buf, p, esc);
+ if (end)
+ res = end - buf;
}
}
- m->count = m->size;
- return -1;
+ seq_commit(m, res);
+
+ return res;
}
EXPORT_SYMBOL(seq_path);
int seq_path_root(struct seq_file *m, struct path *path, struct path *root,
char *esc)
{
- int err = -ENAMETOOLONG;
- if (m->count < m->size) {
- char *s = m->buf + m->count;
+ char *buf;
+ size_t size = seq_get_buf(m, &buf);
+ int res = -ENAMETOOLONG;
+
+ if (size) {
char *p;
spin_lock(&dcache_lock);
- p = __d_path(path, root, s, m->size - m->count);
+ p = __d_path(path, root, buf, size);
spin_unlock(&dcache_lock);
- err = PTR_ERR(p);
+ res = PTR_ERR(p);
if (!IS_ERR(p)) {
- s = mangle_path(s, p, esc);
- if (s) {
- p = m->buf + m->count;
- m->count = s - m->buf;
- return 0;
- }
+ char *end = mangle_path(buf, p, esc);
+ if (end)
+ res = end - buf;
+ else
+ res = -ENAMETOOLONG;
}
}
- m->count = m->size;
- return err;
+ seq_commit(m, res);
+
+ return res < 0 ? res : 0;
}
/*
*/
int seq_dentry(struct seq_file *m, struct dentry *dentry, char *esc)
{
- if (m->count < m->size) {
- char *s = m->buf + m->count;
- char *p = dentry_path(dentry, s, m->size - m->count);
+ char *buf;
+ size_t size = seq_get_buf(m, &buf);
+ int res = -1;
+
+ if (size) {
+ char *p = dentry_path(dentry, buf, size);
if (!IS_ERR(p)) {
- s = mangle_path(s, p, esc);
- if (s) {
- p = m->buf + m->count;
- m->count = s - m->buf;
- return s - p;
- }
+ char *end = mangle_path(buf, p, esc);
+ if (end)
+ res = end - buf;
}
}
- m->count = m->size;
- return -1;
+ seq_commit(m, res);
+
+ return res;
}
int seq_bitmap(struct seq_file *m, const unsigned long *bits,
static void
smb_unload_nls(struct smb_sb_info *server)
{
- if (server->remote_nls) {
- unload_nls(server->remote_nls);
- server->remote_nls = NULL;
- }
- if (server->local_nls) {
- unload_nls(server->local_nls);
- server->local_nls = NULL;
- }
+ unload_nls(server->remote_nls);
+ unload_nls(server->local_nls);
}
static void
}
EXPORT_SYMBOL(get_super);
+
+/**
+ * get_active_super - get an active reference to the superblock of a device
+ * @bdev: device to get the superblock for
+ *
+ * Scans the superblock list and finds the superblock of the file system
+ * mounted on the device given. Returns the superblock with an active
+ * reference and s_umount held exclusively or %NULL if none was found.
+ */
+struct super_block *get_active_super(struct block_device *bdev)
+{
+ struct super_block *sb;
+
+ if (!bdev)
+ return NULL;
+
+ spin_lock(&sb_lock);
+ list_for_each_entry(sb, &super_blocks, s_list) {
+ if (sb->s_bdev != bdev)
+ continue;
+
+ sb->s_count++;
+ spin_unlock(&sb_lock);
+ down_write(&sb->s_umount);
+ if (sb->s_root) {
+ spin_lock(&sb_lock);
+ if (sb->s_count > S_BIAS) {
+ atomic_inc(&sb->s_active);
+ sb->s_count--;
+ spin_unlock(&sb_lock);
+ return sb;
+ }
+ spin_unlock(&sb_lock);
+ }
+ up_write(&sb->s_umount);
+ put_super(sb);
+ yield();
+ spin_lock(&sb_lock);
+ }
+ spin_unlock(&sb_lock);
+ return NULL;
+}
struct super_block * user_get_super(dev_t dev)
{
{
int retval;
int remount_rw;
-
+
+ if (sb->s_frozen != SB_UNFROZEN)
+ return -EBUSY;
+
#ifdef CONFIG_BLOCK
if (!(flags & MS_RDONLY) && bdev_read_only(sb->s_bdev))
return -EACCES;
#endif
+
if (flags & MS_RDONLY)
acct_auto_close(sb);
shrink_dcache_sb(sb);
* will protect the lockfs code from trying to start a snapshot
* while we are mounting
*/
- down(&bdev->bd_mount_sem);
+ mutex_lock(&bdev->bd_fsfreeze_mutex);
+ if (bdev->bd_fsfreeze_count > 0) {
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ error = -EBUSY;
+ goto error_bdev;
+ }
s = sget(fs_type, test_bdev_super, set_bdev_super, bdev);
- up(&bdev->bd_mount_sem);
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
if (IS_ERR(s))
goto error_s;
if (error)
goto out_sb;
+ /*
+ * filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE
+ * but s_maxbytes was an unsigned long long for many releases. Throw
+ * this warning for a little while to try and catch filesystems that
+ * violate this rule. This warning should be either removed or
+ * converted to a BUG() in 2.6.34.
+ */
+ WARN((mnt->mnt_sb->s_maxbytes < 0), "%s set sb->s_maxbytes to "
+ "negative value (%lld)\n", type->name, mnt->mnt_sb->s_maxbytes);
+
mnt->mnt_mountpoint = mnt->mnt_root;
mnt->mnt_parent = mnt;
up_write(&mnt->mnt_sb->s_umount);
.direct_IO = xfs_vm_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
xfs_stats_clear_proc_handler(
ctl_table *ctl,
int write,
- struct file *filp,
void __user *buffer,
size_t *lenp,
loff_t *ppos)
int c, ret, *valp = ctl->data;
__uint32_t vn_active;
- ret = proc_dointvec_minmax(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(ctl, write, buffer, lenp, ppos);
if (!ret && write && *valp) {
printk("XFS Clearing xfsstats\n");
ACPI_BUS_TYPE_POWER,
ACPI_BUS_TYPE_PROCESSOR,
ACPI_BUS_TYPE_THERMAL,
- ACPI_BUS_TYPE_SYSTEM,
ACPI_BUS_TYPE_POWER_BUTTON,
ACPI_BUS_TYPE_SLEEP_BUTTON,
ACPI_BUS_DEVICE_TYPE_COUNT
struct acpi_device_flags {
u32 dynamic_status:1;
- u32 hardware_id:1;
- u32 compatible_ids:1;
u32 bus_address:1;
- u32 unique_id:1;
u32 removable:1;
u32 ejectable:1;
u32 lockable:1;
u32 performance_manageable:1;
u32 wake_capable:1; /* Wakeup(_PRW) supported? */
u32 force_power_state:1;
- u32 reserved:19;
+ u32 reserved:22;
};
/* File System */
typedef char acpi_device_name[40];
typedef char acpi_device_class[20];
+struct acpi_hardware_id {
+ struct list_head list;
+ char *id;
+};
+
struct acpi_device_pnp {
acpi_bus_id bus_id; /* Object name */
acpi_bus_address bus_address; /* _ADR */
- char *hardware_id; /* _HID */
- struct acpica_device_id_list *cid_list; /* _CIDs */
char *unique_id; /* _UID */
+ struct list_head ids; /* _HID and _CIDs */
acpi_device_name device_name; /* Driver-determined */
acpi_device_class device_class; /* " */
};
#define acpi_device_bid(d) ((d)->pnp.bus_id)
#define acpi_device_adr(d) ((d)->pnp.bus_address)
-#define acpi_device_hid(d) ((d)->pnp.hardware_id)
-#define acpi_device_uid(d) ((d)->pnp.unique_id)
+char *acpi_device_hid(struct acpi_device *device);
#define acpi_device_name(d) ((d)->pnp.device_name)
#define acpi_device_class(d) ((d)->pnp.device_class)
/* Device */
struct acpi_device {
- acpi_handle handle;
+ int device_type;
+ acpi_handle handle; /* no handle for fixed hardware */
struct acpi_device *parent;
struct list_head children;
struct list_head node;
int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
void acpi_bus_data_handler(acpi_handle handle, void *context);
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+ unsigned long long *sta);
int acpi_bus_get_status(struct acpi_device *device);
int acpi_bus_get_power(acpi_handle handle, int *state);
int acpi_bus_set_power(acpi_handle handle, int state);
--- /dev/null
+#ifndef ACPI_BUTTON_H
+#define ACPI_BUTTON_H
+
+#include <linux/notifier.h>
+
+#if defined(CONFIG_ACPI_BUTTON) || defined(CONFIG_ACPI_BUTTON_MODULE)
+extern int acpi_lid_notifier_register(struct notifier_block *nb);
+extern int acpi_lid_notifier_unregister(struct notifier_block *nb);
+extern int acpi_lid_open(void);
+#else
+static inline int acpi_lid_notifier_register(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline int acpi_lid_notifier_unregister(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline int acpi_lid_open(void)
+{
+ return 1;
+}
+#endif /* defined(CONFIG_ACPI_BUTTON) || defined(CONFIG_ACPI_BUTTON_MODULE) */
+
+#endif /* ACPI_BUTTON_H */
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
#endif
+#ifndef F_SETOWN_EX
+#define F_SETOWN_EX 12
+#define F_GETOWN_EX 13
+#endif
+
+#define F_OWNER_TID 0
+#define F_OWNER_PID 1
+#define F_OWNER_GID 2
+
+struct f_owner_ex {
+ int type;
+ pid_t pid;
+};
/* for F_[GET|SET]FL */
#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
#define MADV_REMOVE 9 /* remove these pages & resources */
#define MADV_DONTFORK 10 /* don't inherit across fork */
#define MADV_DOFORK 11 /* do inherit across fork */
+#define MADV_HWPOISON 100 /* poison a page for testing */
#define MADV_MERGEABLE 12 /* KSM may merge identical pages */
#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */
#ifdef __ARCH_SI_TRAPNO
int _trapno; /* TRAP # which caused the signal */
#endif
+ short _addr_lsb; /* LSB of the reported address */
} _sigfault;
/* SIGPOLL */
#ifdef __ARCH_SI_TRAPNO
#define si_trapno _sifields._sigfault._trapno
#endif
+#define si_addr_lsb _sifields._sigfault._addr_lsb
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
-#define NSIGBUS 3
+/* hardware memory error consumed on a machine check: action required */
+#define BUS_MCEERR_AR (__SI_FAULT|4)
+/* hardware memory error detected in process but not consumed: action optional*/
+#define BUS_MCEERR_AO (__SI_FAULT|5)
+#define NSIGBUS 5
/*
* SIGTRAP si_codes
#ifndef parent_node
#define parent_node(node) ((void)(node),0)
#endif
-#ifndef node_to_cpumask
-#define node_to_cpumask(node) ((void)node, cpu_online_map)
-#endif
#ifndef cpumask_of_node
#define cpumask_of_node(node) ((void)node, cpu_online_mask)
#endif
#endif /* CONFIG_NUMA */
-/*
- * returns pointer to cpumask for specified node
- * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
- */
-#ifndef node_to_cpumask_ptr
-
-#define node_to_cpumask_ptr(v, node) \
- cpumask_t _##v = node_to_cpumask(node); \
- const cpumask_t *v = &_##v
-
-#define node_to_cpumask_ptr_next(v, node) \
- _##v = node_to_cpumask(node)
-#endif
-
#endif /* _ASM_GENERIC_TOPOLOGY_H */
. = ALIGN(PAGE_SIZE); \
.data : AT(ADDR(.data) - LOAD_OFFSET) { \
INIT_TASK_DATA(inittask) \
+ NOSAVE_DATA \
+ PAGE_ALIGNED_DATA(pagealigned) \
CACHELINE_ALIGNED_DATA(cacheline) \
READ_MOSTLY_DATA(cacheline) \
DATA_DATA \
CONSTRUCTORS \
- NOSAVE_DATA \
- PAGE_ALIGNED_DATA(pagealigned) \
}
#define INIT_TEXT_SECTION(inittext_align) \
{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x2e42, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
#define DRM_I915_GEM_GET_APERTURE 0x23
#define DRM_I915_GEM_MMAP_GTT 0x24
#define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25
+#define DRM_I915_GEM_MADVISE 0x26
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
+#define DRM_IOCTL_I915_GEM_MADVISE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
__u32 pipe;
};
+#define I915_MADV_WILLNEED 0
+#define I915_MADV_DONTNEED 1
+#define __I915_MADV_PURGED 2 /* internal state */
+
+struct drm_i915_gem_madvise {
+ /** Handle of the buffer to change the backing store advice */
+ __u32 handle;
+
+ /* Advice: either the buffer will be needed again in the near future,
+ * or wont be and could be discarded under memory pressure.
+ */
+ __u32 madv;
+
+ /** Whether the backing store still exists. */
+ __u32 retained;
+};
+
#endif /* _I915_DRM_H_ */
--- /dev/null
+/*
+ * include/linux/amba/mmci.h
+ */
+#ifndef AMBA_MMCI_H
+#define AMBA_MMCI_H
+
+#include <linux/mmc/host.h>
+
+struct mmci_platform_data {
+ unsigned int ocr_mask; /* available voltages */
+ u32 (*translate_vdd)(struct device *, unsigned int);
+ unsigned int (*status)(struct device *);
+ int gpio_wp;
+ int gpio_cd;
+ unsigned long capabilities;
+};
+
+#endif
/**
* enum SPI Clock Phase - clock phase (Motorola SPI interface only)
- * @SSP_CLK_RISING_EDGE: Receive data on rising edge
- * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
+ * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
*/
enum ssp_spi_clk_phase {
- SSP_CLK_RISING_EDGE,
- SSP_CLK_FALLING_EDGE
+ SSP_CLK_FIRST_EDGE,
+ SSP_CLK_SECOND_EDGE
};
/**
* array.
* @ASYNC_TX_ACK: immediately ack the descriptor, precludes setting up a
* dependency chain
- * @ASYNC_TX_DEP_ACK: ack the dependency descriptor. Useful for chaining.
+ * @ASYNC_TX_FENCE: specify that the next operation in the dependency
+ * chain uses this operation's result as an input
*/
enum async_tx_flags {
ASYNC_TX_XOR_ZERO_DST = (1 << 0),
ASYNC_TX_XOR_DROP_DST = (1 << 1),
- ASYNC_TX_ACK = (1 << 3),
- ASYNC_TX_DEP_ACK = (1 << 4),
+ ASYNC_TX_ACK = (1 << 2),
+ ASYNC_TX_FENCE = (1 << 3),
+};
+
+/**
+ * struct async_submit_ctl - async_tx submission/completion modifiers
+ * @flags: submission modifiers
+ * @depend_tx: parent dependency of the current operation being submitted
+ * @cb_fn: callback routine to run at operation completion
+ * @cb_param: parameter for the callback routine
+ * @scribble: caller provided space for dma/page address conversions
+ */
+struct async_submit_ctl {
+ enum async_tx_flags flags;
+ struct dma_async_tx_descriptor *depend_tx;
+ dma_async_tx_callback cb_fn;
+ void *cb_param;
+ void *scribble;
};
#ifdef CONFIG_DMA_ENGINE
#define async_tx_issue_pending_all dma_issue_pending_all
+
+/**
+ * async_tx_issue_pending - send pending descriptor to the hardware channel
+ * @tx: descriptor handle to retrieve hardware context
+ *
+ * Note: any dependent operations will have already been issued by
+ * async_tx_channel_switch, or (in the case of no channel switch) will
+ * be already pending on this channel.
+ */
+static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
+{
+ if (likely(tx)) {
+ struct dma_chan *chan = tx->chan;
+ struct dma_device *dma = chan->device;
+
+ dma->device_issue_pending(chan);
+ }
+}
#ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL
#include <asm/async_tx.h>
#else
#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \
__async_tx_find_channel(dep, type)
struct dma_chan *
-__async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
- enum dma_transaction_type tx_type);
+__async_tx_find_channel(struct async_submit_ctl *submit,
+ enum dma_transaction_type tx_type);
#endif /* CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL */
#else
static inline void async_tx_issue_pending_all(void)
do { } while (0);
}
+static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
+{
+ do { } while (0);
+}
+
static inline struct dma_chan *
-async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
- enum dma_transaction_type tx_type, struct page **dst, int dst_count,
- struct page **src, int src_count, size_t len)
+async_tx_find_channel(struct async_submit_ctl *submit,
+ enum dma_transaction_type tx_type, struct page **dst,
+ int dst_count, struct page **src, int src_count,
+ size_t len)
{
return NULL;
}
* @cb_fn_param: parameter to pass to the callback routine
*/
static inline void
-async_tx_sync_epilog(dma_async_tx_callback cb_fn, void *cb_fn_param)
+async_tx_sync_epilog(struct async_submit_ctl *submit)
{
- if (cb_fn)
- cb_fn(cb_fn_param);
+ if (submit->cb_fn)
+ submit->cb_fn(submit->cb_param);
}
-void
-async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
- enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+typedef union {
+ unsigned long addr;
+ struct page *page;
+ dma_addr_t dma;
+} addr_conv_t;
+
+static inline void
+init_async_submit(struct async_submit_ctl *args, enum async_tx_flags flags,
+ struct dma_async_tx_descriptor *tx,
+ dma_async_tx_callback cb_fn, void *cb_param,
+ addr_conv_t *scribble)
+{
+ args->flags = flags;
+ args->depend_tx = tx;
+ args->cb_fn = cb_fn;
+ args->cb_param = cb_param;
+ args->scribble = scribble;
+}
+
+void async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
+ struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_xor(struct page *dest, struct page **src_list, unsigned int offset,
- int src_cnt, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+ int src_cnt, size_t len, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
-async_xor_zero_sum(struct page *dest, struct page **src_list,
- unsigned int offset, int src_cnt, size_t len,
- u32 *result, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+async_xor_val(struct page *dest, struct page **src_list, unsigned int offset,
+ int src_cnt, size_t len, enum sum_check_flags *result,
+ struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
- unsigned int src_offset, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+ unsigned int src_offset, size_t len,
+ struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_memset(struct page *dest, int val, unsigned int offset,
- size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+ size_t len, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *async_trigger_callback(struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_gen_syndrome(struct page **blocks, unsigned int offset, int src_cnt,
+ size_t len, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_syndrome_val(struct page **blocks, unsigned int offset, int src_cnt,
+ size_t len, enum sum_check_flags *pqres, struct page *spare,
+ struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_raid6_2data_recov(int src_num, size_t bytes, int faila, int failb,
+ struct page **ptrs, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
-async_trigger_callback(enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+async_raid6_datap_recov(int src_num, size_t bytes, int faila,
+ struct page **ptrs, struct async_submit_ctl *submit);
void async_tx_quiesce(struct dma_async_tx_descriptor **tx);
#endif /* _ASYNC_TX_H_ */
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+ long nr_pages);
int bdi_writeback_task(struct bdi_writeback *wb);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
-extern int set_binfmt(struct linux_binfmt *new);
+extern void set_binfmt(struct linux_binfmt *new);
extern void free_bprm(struct linux_binprm *);
#endif /* __KERNEL__ */
CGRP_WAIT_ON_RMDIR,
};
+/* which pidlist file are we talking about? */
+enum cgroup_filetype {
+ CGROUP_FILE_PROCS,
+ CGROUP_FILE_TASKS,
+};
+
+/*
+ * A pidlist is a list of pids that virtually represents the contents of one
+ * of the cgroup files ("procs" or "tasks"). We keep a list of such pidlists,
+ * a pair (one each for procs, tasks) for each pid namespace that's relevant
+ * to the cgroup.
+ */
+struct cgroup_pidlist {
+ /*
+ * used to find which pidlist is wanted. doesn't change as long as
+ * this particular list stays in the list.
+ */
+ struct { enum cgroup_filetype type; struct pid_namespace *ns; } key;
+ /* array of xids */
+ pid_t *list;
+ /* how many elements the above list has */
+ int length;
+ /* how many files are using the current array */
+ int use_count;
+ /* each of these stored in a list by its cgroup */
+ struct list_head links;
+ /* pointer to the cgroup we belong to, for list removal purposes */
+ struct cgroup *owner;
+ /* protects the other fields */
+ struct rw_semaphore mutex;
+};
+
struct cgroup {
unsigned long flags; /* "unsigned long" so bitops work */
*/
struct list_head release_list;
- /* pids_mutex protects pids_list and cached pid arrays. */
- struct rw_semaphore pids_mutex;
-
- /* Linked list of struct cgroup_pids */
- struct list_head pids_list;
+ /*
+ * list of pidlists, up to two for each namespace (one for procs, one
+ * for tasks); created on demand.
+ */
+ struct list_head pidlists;
+ struct mutex pidlist_mutex;
/* For RCU-protected deletion */
struct rcu_head rcu_head;
* during subsystem registration (at boot time).
*/
struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
+
+ /* For RCU-protected deletion */
+ struct rcu_head rcu_head;
};
/*
struct cgroup *cgrp);
int (*pre_destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp);
void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp);
- int (*can_attach)(struct cgroup_subsys *ss,
- struct cgroup *cgrp, struct task_struct *tsk);
+ int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
+ struct task_struct *tsk, bool threadgroup);
void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cgrp, struct task_struct *tsk);
+ struct cgroup *old_cgrp, struct task_struct *tsk,
+ bool threadgroup);
void (*fork)(struct cgroup_subsys *ss, struct task_struct *task);
void (*exit)(struct cgroup_subsys *ss, struct task_struct *task);
int (*populate)(struct cgroup_subsys *ss,
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
- * Please read Documentation/filesystems/configfs.txt before using the
- * configfs interface, ESPECIALLY the parts about reference counts and
+ * Please read Documentation/filesystems/configfs/configfs.txt before using
+ * the configfs interface, ESPECIALLY the parts about reference counts and
* item destructors.
*/
/*
* Cpumasks provide a bitmap suitable for representing the
- * set of CPU's in a system, one bit position per CPU number.
- *
- * The new cpumask_ ops take a "struct cpumask *"; the old ones
- * use cpumask_t.
- *
- * See detailed comments in the file linux/bitmap.h describing the
- * data type on which these cpumasks are based.
- *
- * For details of cpumask_scnprintf() and cpumask_parse_user(),
- * see bitmap_scnprintf() and bitmap_parse_user() in lib/bitmap.c.
- * For details of cpulist_scnprintf() and cpulist_parse(), see
- * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
- * For details of cpu_remap(), see bitmap_bitremap in lib/bitmap.c
- * For details of cpus_remap(), see bitmap_remap in lib/bitmap.c.
- * For details of cpus_onto(), see bitmap_onto in lib/bitmap.c.
- * For details of cpus_fold(), see bitmap_fold in lib/bitmap.c.
- *
- * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- * Note: The alternate operations with the suffix "_nr" are used
- * to limit the range of the loop to nr_cpu_ids instead of
- * NR_CPUS when NR_CPUS > 64 for performance reasons.
- * If NR_CPUS is <= 64 then most assembler bitmask
- * operators execute faster with a constant range, so
- * the operator will continue to use NR_CPUS.
- *
- * Another consideration is that nr_cpu_ids is initialized
- * to NR_CPUS and isn't lowered until the possible cpus are
- * discovered (including any disabled cpus). So early uses
- * will span the entire range of NR_CPUS.
- * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- *
- * The obsolescent cpumask operations are:
- *
- * void cpu_set(cpu, mask) turn on bit 'cpu' in mask
- * void cpu_clear(cpu, mask) turn off bit 'cpu' in mask
- * void cpus_setall(mask) set all bits
- * void cpus_clear(mask) clear all bits
- * int cpu_isset(cpu, mask) true iff bit 'cpu' set in mask
- * int cpu_test_and_set(cpu, mask) test and set bit 'cpu' in mask
- *
- * int cpus_and(dst, src1, src2) dst = src1 & src2 [intersection]
- * void cpus_or(dst, src1, src2) dst = src1 | src2 [union]
- * void cpus_xor(dst, src1, src2) dst = src1 ^ src2
- * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2
- * void cpus_complement(dst, src) dst = ~src
- *
- * int cpus_equal(mask1, mask2) Does mask1 == mask2?
- * int cpus_intersects(mask1, mask2) Do mask1 and mask2 intersect?
- * int cpus_subset(mask1, mask2) Is mask1 a subset of mask2?
- * int cpus_empty(mask) Is mask empty (no bits sets)?
- * int cpus_full(mask) Is mask full (all bits sets)?
- * int cpus_weight(mask) Hamming weigh - number of set bits
- * int cpus_weight_nr(mask) Same using nr_cpu_ids instead of NR_CPUS
- *
- * void cpus_shift_right(dst, src, n) Shift right
- * void cpus_shift_left(dst, src, n) Shift left
- *
- * int first_cpu(mask) Number lowest set bit, or NR_CPUS
- * int next_cpu(cpu, mask) Next cpu past 'cpu', or NR_CPUS
- * int next_cpu_nr(cpu, mask) Next cpu past 'cpu', or nr_cpu_ids
- *
- * cpumask_t cpumask_of_cpu(cpu) Return cpumask with bit 'cpu' set
- * (can be used as an lvalue)
- * CPU_MASK_ALL Initializer - all bits set
- * CPU_MASK_NONE Initializer - no bits set
- * unsigned long *cpus_addr(mask) Array of unsigned long's in mask
- *
- * CPUMASK_ALLOC kmalloc's a structure that is a composite of many cpumask_t
- * variables, and CPUMASK_PTR provides pointers to each field.
- *
- * The structure should be defined something like this:
- * struct my_cpumasks {
- * cpumask_t mask1;
- * cpumask_t mask2;
- * };
- *
- * Usage is then:
- * CPUMASK_ALLOC(my_cpumasks);
- * CPUMASK_PTR(mask1, my_cpumasks);
- * CPUMASK_PTR(mask2, my_cpumasks);
- *
- * --- DO NOT reference cpumask_t pointers until this check ---
- * if (my_cpumasks == NULL)
- * "kmalloc failed"...
- *
- * References are now pointers to the cpumask_t variables (*mask1, ...)
- *
- *if NR_CPUS > BITS_PER_LONG
- * CPUMASK_ALLOC(m) Declares and allocates struct m *m =
- * kmalloc(sizeof(*m), GFP_KERNEL)
- * CPUMASK_FREE(m) Macro for kfree(m)
- *else
- * CPUMASK_ALLOC(m) Declares struct m _m, *m = &_m
- * CPUMASK_FREE(m) Nop
- *endif
- * CPUMASK_PTR(v, m) Declares cpumask_t *v = &(m->v)
- * ------------------------------------------------------------------------
- *
- * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing
- * int cpumask_parse_user(ubuf, ulen, mask) Parse ascii string as cpumask
- * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing
- * int cpulist_parse(buf, map) Parse ascii string as cpulist
- * int cpu_remap(oldbit, old, new) newbit = map(old, new)(oldbit)
- * void cpus_remap(dst, src, old, new) *dst = map(old, new)(src)
- * void cpus_onto(dst, orig, relmap) *dst = orig relative to relmap
- * void cpus_fold(dst, orig, sz) dst bits = orig bits mod sz
- *
- * for_each_cpu_mask(cpu, mask) for-loop cpu over mask using NR_CPUS
- * for_each_cpu_mask_nr(cpu, mask) for-loop cpu over mask using nr_cpu_ids
- *
- * int num_online_cpus() Number of online CPUs
- * int num_possible_cpus() Number of all possible CPUs
- * int num_present_cpus() Number of present CPUs
- *
- * int cpu_online(cpu) Is some cpu online?
- * int cpu_possible(cpu) Is some cpu possible?
- * int cpu_present(cpu) Is some cpu present (can schedule)?
- *
- * int any_online_cpu(mask) First online cpu in mask
- *
- * for_each_possible_cpu(cpu) for-loop cpu over cpu_possible_map
- * for_each_online_cpu(cpu) for-loop cpu over cpu_online_map
- * for_each_present_cpu(cpu) for-loop cpu over cpu_present_map
- *
- * Subtlety:
- * 1) The 'type-checked' form of cpu_isset() causes gcc (3.3.2, anyway)
- * to generate slightly worse code. Note for example the additional
- * 40 lines of assembly code compiling the "for each possible cpu"
- * loops buried in the disk_stat_read() macros calls when compiling
- * drivers/block/genhd.c (arch i386, CONFIG_SMP=y). So use a simple
- * one-line #define for cpu_isset(), instead of wrapping an inline
- * inside a macro, the way we do the other calls.
+ * set of CPU's in a system, one bit position per CPU number. In general,
+ * only nr_cpu_ids (<= NR_CPUS) bits are valid.
*/
-
#include <linux/kernel.h>
#include <linux/threads.h>
#include <linux/bitmap.h>
typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t;
-extern cpumask_t _unused_cpumask_arg_;
-
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst))
-static inline void __cpu_set(int cpu, volatile cpumask_t *dstp)
-{
- set_bit(cpu, dstp->bits);
-}
-
-#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst))
-static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp)
-{
- clear_bit(cpu, dstp->bits);
-}
-
-#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS)
-static inline void __cpus_setall(cpumask_t *dstp, int nbits)
-{
- bitmap_fill(dstp->bits, nbits);
-}
-
-#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS)
-static inline void __cpus_clear(cpumask_t *dstp, int nbits)
-{
- bitmap_zero(dstp->bits, nbits);
-}
-
-/* No static inline type checking - see Subtlety (1) above. */
-#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits)
-
-#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask))
-static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
-{
- return test_and_set_bit(cpu, addr->bits);
-}
-
-#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
-static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_andnot(dst, src1, src2) \
- __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
-static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS)
-static inline void __cpus_complement(cpumask_t *dstp,
- const cpumask_t *srcp, int nbits)
-{
- bitmap_complement(dstp->bits, srcp->bits, nbits);
-}
-
-#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_equal(const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_equal(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_intersects(const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_intersects(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_subset(const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_subset(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
-static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
-{
- return bitmap_empty(srcp->bits, nbits);
-}
-
-#define cpus_full(cpumask) __cpus_full(&(cpumask), NR_CPUS)
-static inline int __cpus_full(const cpumask_t *srcp, int nbits)
-{
- return bitmap_full(srcp->bits, nbits);
-}
-
-#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
-static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
-{
- return bitmap_weight(srcp->bits, nbits);
-}
-
-#define cpus_shift_right(dst, src, n) \
- __cpus_shift_right(&(dst), &(src), (n), NR_CPUS)
-static inline void __cpus_shift_right(cpumask_t *dstp,
- const cpumask_t *srcp, int n, int nbits)
-{
- bitmap_shift_right(dstp->bits, srcp->bits, n, nbits);
-}
-
-#define cpus_shift_left(dst, src, n) \
- __cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
-static inline void __cpus_shift_left(cpumask_t *dstp,
- const cpumask_t *srcp, int n, int nbits)
-{
- bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
-}
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
/**
- * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask *
- * @bitmap: the bitmap
- *
- * There are a few places where cpumask_var_t isn't appropriate and
- * static cpumasks must be used (eg. very early boot), yet we don't
- * expose the definition of 'struct cpumask'.
- *
- * This does the conversion, and can be used as a constant initializer.
- */
-#define to_cpumask(bitmap) \
- ((struct cpumask *)(1 ? (bitmap) \
- : (void *)sizeof(__check_is_bitmap(bitmap))))
-
-static inline int __check_is_bitmap(const unsigned long *bitmap)
-{
- return 1;
-}
-
-/*
- * Special-case data structure for "single bit set only" constant CPU masks.
+ * cpumask_bits - get the bits in a cpumask
+ * @maskp: the struct cpumask *
*
- * We pre-generate all the 64 (or 32) possible bit positions, with enough
- * padding to the left and the right, and return the constant pointer
- * appropriately offset.
- */
-extern const unsigned long
- cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
-
-static inline const struct cpumask *get_cpu_mask(unsigned int cpu)
-{
- const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
- p -= cpu / BITS_PER_LONG;
- return to_cpumask(p);
-}
-
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-/*
- * In cases where we take the address of the cpumask immediately,
- * gcc optimizes it out (it's a constant) and there's no huge stack
- * variable created:
+ * You should only assume nr_cpu_ids bits of this mask are valid. This is
+ * a macro so it's const-correct.
*/
-#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
-
-
-#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
-
-#if NR_CPUS <= BITS_PER_LONG
-
-#define CPU_MASK_ALL \
-(cpumask_t) { { \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-} }
-
-#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL)
-
-#else
-
-#define CPU_MASK_ALL \
-(cpumask_t) { { \
- [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-} }
-
-/* cpu_mask_all is in init/main.c */
-extern cpumask_t cpu_mask_all;
-#define CPU_MASK_ALL_PTR (&cpu_mask_all)
-
-#endif
-
-#define CPU_MASK_NONE \
-(cpumask_t) { { \
- [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \
-} }
-
-#define CPU_MASK_CPU0 \
-(cpumask_t) { { \
- [0] = 1UL \
-} }
-
-#define cpus_addr(src) ((src).bits)
-
-#if NR_CPUS > BITS_PER_LONG
-#define CPUMASK_ALLOC(m) struct m *m = kmalloc(sizeof(*m), GFP_KERNEL)
-#define CPUMASK_FREE(m) kfree(m)
-#else
-#define CPUMASK_ALLOC(m) struct m _m, *m = &_m
-#define CPUMASK_FREE(m)
-#endif
-#define CPUMASK_PTR(v, m) cpumask_t *v = &(m->v)
-
-#define cpu_remap(oldbit, old, new) \
- __cpu_remap((oldbit), &(old), &(new), NR_CPUS)
-static inline int __cpu_remap(int oldbit,
- const cpumask_t *oldp, const cpumask_t *newp, int nbits)
-{
- return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits);
-}
-
-#define cpus_remap(dst, src, old, new) \
- __cpus_remap(&(dst), &(src), &(old), &(new), NR_CPUS)
-static inline void __cpus_remap(cpumask_t *dstp, const cpumask_t *srcp,
- const cpumask_t *oldp, const cpumask_t *newp, int nbits)
-{
- bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits);
-}
-
-#define cpus_onto(dst, orig, relmap) \
- __cpus_onto(&(dst), &(orig), &(relmap), NR_CPUS)
-static inline void __cpus_onto(cpumask_t *dstp, const cpumask_t *origp,
- const cpumask_t *relmapp, int nbits)
-{
- bitmap_onto(dstp->bits, origp->bits, relmapp->bits, nbits);
-}
-
-#define cpus_fold(dst, orig, sz) \
- __cpus_fold(&(dst), &(orig), sz, NR_CPUS)
-static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
- int sz, int nbits)
-{
- bitmap_fold(dstp->bits, origp->bits, sz, nbits);
-}
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
+#define cpumask_bits(maskp) ((maskp)->bits)
#if NR_CPUS == 1
-
#define nr_cpu_ids 1
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-#define first_cpu(src) ({ (void)(src); 0; })
-#define next_cpu(n, src) ({ (void)(src); 1; })
-#define any_online_cpu(mask) 0
-#define for_each_cpu_mask(cpu, mask) \
- for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
-#else /* NR_CPUS > 1 */
-
+#else
extern int nr_cpu_ids;
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-int __first_cpu(const cpumask_t *srcp);
-int __next_cpu(int n, const cpumask_t *srcp);
-int __any_online_cpu(const cpumask_t *mask);
-
-#define first_cpu(src) __first_cpu(&(src))
-#define next_cpu(n, src) __next_cpu((n), &(src))
-#define any_online_cpu(mask) __any_online_cpu(&(mask))
-#define for_each_cpu_mask(cpu, mask) \
- for ((cpu) = -1; \
- (cpu) = next_cpu((cpu), (mask)), \
- (cpu) < NR_CPUS; )
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
#endif
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-#if NR_CPUS <= 64
-
-#define next_cpu_nr(n, src) next_cpu(n, src)
-#define cpus_weight_nr(cpumask) cpus_weight(cpumask)
-#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask)
-
-#else /* NR_CPUS > 64 */
-
-int __next_cpu_nr(int n, const cpumask_t *srcp);
-#define next_cpu_nr(n, src) __next_cpu_nr((n), &(src))
-#define cpus_weight_nr(cpumask) __cpus_weight(&(cpumask), nr_cpu_ids)
-#define for_each_cpu_mask_nr(cpu, mask) \
- for ((cpu) = -1; \
- (cpu) = next_cpu_nr((cpu), (mask)), \
- (cpu) < nr_cpu_ids; )
-
-#endif /* NR_CPUS > 64 */
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also,
+ * not all bits may be allocated. */
+#define nr_cpumask_bits nr_cpu_ids
+#else
+#define nr_cpumask_bits NR_CPUS
+#endif
/*
* The following particular system cpumasks and operations manage
extern const struct cpumask *const cpu_possible_mask;
extern const struct cpumask *const cpu_online_mask;
extern const struct cpumask *const cpu_present_mask;
-extern const struct cpumask *const cpu_active_mask;
-
-/* These strip const, as traditionally they weren't const. */
-#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask)
-#define cpu_online_map (*(cpumask_t *)cpu_online_mask)
-#define cpu_present_map (*(cpumask_t *)cpu_present_mask)
-#define cpu_active_map (*(cpumask_t *)cpu_active_mask)
-
-#if NR_CPUS > 1
-#define num_online_cpus() cpumask_weight(cpu_online_mask)
-#define num_possible_cpus() cpumask_weight(cpu_possible_mask)
-#define num_present_cpus() cpumask_weight(cpu_present_mask)
-#define cpu_online(cpu) cpumask_test_cpu((cpu), cpu_online_mask)
-#define cpu_possible(cpu) cpumask_test_cpu((cpu), cpu_possible_mask)
-#define cpu_present(cpu) cpumask_test_cpu((cpu), cpu_present_mask)
-#define cpu_active(cpu) cpumask_test_cpu((cpu), cpu_active_mask)
-#else
-#define num_online_cpus() 1
-#define num_possible_cpus() 1
-#define num_present_cpus() 1
-#define cpu_online(cpu) ((cpu) == 0)
-#define cpu_possible(cpu) ((cpu) == 0)
-#define cpu_present(cpu) ((cpu) == 0)
-#define cpu_active(cpu) ((cpu) == 0)
-#endif
-
-#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu))
-
-/* These are the new versions of the cpumask operators: passed by pointer.
- * The older versions will be implemented in terms of these, then deleted. */
-#define cpumask_bits(maskp) ((maskp)->bits)
-
-#if NR_CPUS <= BITS_PER_LONG
-#define CPU_BITS_ALL \
-{ \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-}
-
-#else /* NR_CPUS > BITS_PER_LONG */
-
-#define CPU_BITS_ALL \
-{ \
- [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-}
-#endif /* NR_CPUS > BITS_PER_LONG */
+extern const struct cpumask *const cpu_active_mask;
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also,
- * not all bits may be allocated. */
-#define nr_cpumask_bits nr_cpu_ids
+#if NR_CPUS > 1
+#define num_online_cpus() cpumask_weight(cpu_online_mask)
+#define num_possible_cpus() cpumask_weight(cpu_possible_mask)
+#define num_present_cpus() cpumask_weight(cpu_present_mask)
+#define cpu_online(cpu) cpumask_test_cpu((cpu), cpu_online_mask)
+#define cpu_possible(cpu) cpumask_test_cpu((cpu), cpu_possible_mask)
+#define cpu_present(cpu) cpumask_test_cpu((cpu), cpu_present_mask)
+#define cpu_active(cpu) cpumask_test_cpu((cpu), cpu_active_mask)
#else
-#define nr_cpumask_bits NR_CPUS
+#define num_online_cpus() 1
+#define num_possible_cpus() 1
+#define num_present_cpus() 1
+#define cpu_online(cpu) ((cpu) == 0)
+#define cpu_possible(cpu) ((cpu) == 0)
+#define cpu_present(cpu) ((cpu) == 0)
+#define cpu_active(cpu) ((cpu) == 0)
#endif
/* verify cpu argument to cpumask_* operators */
void init_cpu_present(const struct cpumask *src);
void init_cpu_possible(const struct cpumask *src);
void init_cpu_online(const struct cpumask *src);
+
+/**
+ * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask *
+ * @bitmap: the bitmap
+ *
+ * There are a few places where cpumask_var_t isn't appropriate and
+ * static cpumasks must be used (eg. very early boot), yet we don't
+ * expose the definition of 'struct cpumask'.
+ *
+ * This does the conversion, and can be used as a constant initializer.
+ */
+#define to_cpumask(bitmap) \
+ ((struct cpumask *)(1 ? (bitmap) \
+ : (void *)sizeof(__check_is_bitmap(bitmap))))
+
+static inline int __check_is_bitmap(const unsigned long *bitmap)
+{
+ return 1;
+}
+
+/*
+ * Special-case data structure for "single bit set only" constant CPU masks.
+ *
+ * We pre-generate all the 64 (or 32) possible bit positions, with enough
+ * padding to the left and the right, and return the constant pointer
+ * appropriately offset.
+ */
+extern const unsigned long
+ cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
+
+static inline const struct cpumask *get_cpu_mask(unsigned int cpu)
+{
+ const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
+ p -= cpu / BITS_PER_LONG;
+ return to_cpumask(p);
+}
+
+#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu))
+
+#if NR_CPUS <= BITS_PER_LONG
+#define CPU_BITS_ALL \
+{ \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+}
+
+#else /* NR_CPUS > BITS_PER_LONG */
+
+#define CPU_BITS_ALL \
+{ \
+ [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+}
+#endif /* NR_CPUS > BITS_PER_LONG */
+
+/*
+ *
+ * From here down, all obsolete. Use cpumask_ variants!
+ *
+ */
+#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
+/* These strip const, as traditionally they weren't const. */
+#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask)
+#define cpu_online_map (*(cpumask_t *)cpu_online_mask)
+#define cpu_present_map (*(cpumask_t *)cpu_present_mask)
+#define cpu_active_map (*(cpumask_t *)cpu_active_mask)
+
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
+
+#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
+
+#if NR_CPUS <= BITS_PER_LONG
+
+#define CPU_MASK_ALL \
+(cpumask_t) { { \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+} }
+
+#else
+
+#define CPU_MASK_ALL \
+(cpumask_t) { { \
+ [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+} }
+
+#endif
+
+#define CPU_MASK_NONE \
+(cpumask_t) { { \
+ [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \
+} }
+
+#define CPU_MASK_CPU0 \
+(cpumask_t) { { \
+ [0] = 1UL \
+} }
+
+#if NR_CPUS == 1
+#define first_cpu(src) ({ (void)(src); 0; })
+#define next_cpu(n, src) ({ (void)(src); 1; })
+#define any_online_cpu(mask) 0
+#define for_each_cpu_mask(cpu, mask) \
+ for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
+#else /* NR_CPUS > 1 */
+int __first_cpu(const cpumask_t *srcp);
+int __next_cpu(int n, const cpumask_t *srcp);
+int __any_online_cpu(const cpumask_t *mask);
+
+#define first_cpu(src) __first_cpu(&(src))
+#define next_cpu(n, src) __next_cpu((n), &(src))
+#define any_online_cpu(mask) __any_online_cpu(&(mask))
+#define for_each_cpu_mask(cpu, mask) \
+ for ((cpu) = -1; \
+ (cpu) = next_cpu((cpu), (mask)), \
+ (cpu) < NR_CPUS; )
+#endif /* SMP */
+
+#if NR_CPUS <= 64
+
+#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask)
+
+#else /* NR_CPUS > 64 */
+
+int __next_cpu_nr(int n, const cpumask_t *srcp);
+#define for_each_cpu_mask_nr(cpu, mask) \
+ for ((cpu) = -1; \
+ (cpu) = __next_cpu_nr((cpu), &(mask)), \
+ (cpu) < nr_cpu_ids; )
+
+#endif /* NR_CPUS > 64 */
+
+#define cpus_addr(src) ((src).bits)
+
+#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst))
+static inline void __cpu_set(int cpu, volatile cpumask_t *dstp)
+{
+ set_bit(cpu, dstp->bits);
+}
+
+#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst))
+static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp)
+{
+ clear_bit(cpu, dstp->bits);
+}
+
+#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS)
+static inline void __cpus_setall(cpumask_t *dstp, int nbits)
+{
+ bitmap_fill(dstp->bits, nbits);
+}
+
+#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS)
+static inline void __cpus_clear(cpumask_t *dstp, int nbits)
+{
+ bitmap_zero(dstp->bits, nbits);
+}
+
+/* No static inline type checking - see Subtlety (1) above. */
+#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits)
+
+#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask))
+static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
+{
+ return test_and_set_bit(cpu, addr->bits);
+}
+
+#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
+static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_andnot(dst, src1, src2) \
+ __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
+static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_equal(const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_equal(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_intersects(const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_intersects(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_subset(const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_subset(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
+static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
+{
+ return bitmap_empty(srcp->bits, nbits);
+}
+
+#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
+static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
+{
+ return bitmap_weight(srcp->bits, nbits);
+}
+
+#define cpus_shift_left(dst, src, n) \
+ __cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
+static inline void __cpus_shift_left(cpumask_t *dstp,
+ const cpumask_t *srcp, int n, int nbits)
+{
+ bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
+}
+#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
+
#endif /* __LINUX_CPUMASK_H */
extern void __validate_process_creds(struct task_struct *,
const char *, unsigned);
-static inline bool creds_are_invalid(const struct cred *cred)
-{
- if (cred->magic != CRED_MAGIC)
- return true;
- if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
- return true;
-#ifdef CONFIG_SECURITY_SELINUX
- if (selinux_is_enabled()) {
- if ((unsigned long) cred->security < PAGE_SIZE)
- return true;
- if ((*(u32 *)cred->security & 0xffffff00) ==
- (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8))
- return true;
- }
-#endif
- return false;
-}
+extern bool creds_are_invalid(const struct cred *cred);
static inline void __validate_creds(const struct cred *cred,
const char *file, unsigned line)
*/
#ifndef DCA_H
#define DCA_H
+
+#include <linux/pci.h>
+
/* DCA Provider API */
/* DCA Notifier Interface */
int id;
};
+struct dca_domain {
+ struct list_head node;
+ struct list_head dca_providers;
+ struct pci_bus *pci_rc;
+};
+
struct dca_ops {
int (*add_requester) (struct dca_provider *, struct device *);
int (*remove_requester) (struct dca_provider *, struct device *);
struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size);
void free_dca_provider(struct dca_provider *dca);
int register_dca_provider(struct dca_provider *dca, struct device *dev);
-void unregister_dca_provider(struct dca_provider *dca);
+void unregister_dca_provider(struct dca_provider *dca, struct device *dev);
static inline void *dca_priv(struct dca_provider *dca)
{
* 2 as published by the Free Software Foundation.
*
* debugfs is for people to use instead of /proc or /sys.
- * See Documentation/DocBook/kernel-api for more details.
+ * See Documentation/DocBook/filesystems for more details.
*/
#ifndef _DEBUGFS_H_
/**
* enum dma_transaction_type - DMA transaction types/indexes
+ *
+ * Note: The DMA_ASYNC_TX capability is not to be set by drivers. It is
+ * automatically set as dma devices are registered.
*/
enum dma_transaction_type {
DMA_MEMCPY,
DMA_XOR,
- DMA_PQ_XOR,
- DMA_DUAL_XOR,
- DMA_PQ_UPDATE,
- DMA_ZERO_SUM,
- DMA_PQ_ZERO_SUM,
+ DMA_PQ,
+ DMA_XOR_VAL,
+ DMA_PQ_VAL,
DMA_MEMSET,
- DMA_MEMCPY_CRC32C,
DMA_INTERRUPT,
DMA_PRIVATE,
+ DMA_ASYNC_TX,
DMA_SLAVE,
};
/**
* enum dma_ctrl_flags - DMA flags to augment operation preparation,
- * control completion, and communicate status.
+ * control completion, and communicate status.
* @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of
- * this transaction
+ * this transaction
* @DMA_CTRL_ACK - the descriptor cannot be reused until the client
- * acknowledges receipt, i.e. has has a chance to establish any
- * dependency chains
+ * acknowledges receipt, i.e. has has a chance to establish any dependency
+ * chains
* @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
* @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
* @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
* (if not set, do the source dma-unmapping as page)
* @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
* (if not set, do the destination dma-unmapping as page)
+ * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q
+ * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P
+ * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as
+ * sources that were the result of a previous operation, in the case of a PQ
+ * operation it continues the calculation with new sources
+ * @DMA_PREP_FENCE - tell the driver that subsequent operations depend
+ * on the result of this operation
*/
enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
+ DMA_PREP_PQ_DISABLE_P = (1 << 6),
+ DMA_PREP_PQ_DISABLE_Q = (1 << 7),
+ DMA_PREP_CONTINUE = (1 << 8),
+ DMA_PREP_FENCE = (1 << 9),
};
+/**
+ * enum sum_check_bits - bit position of pq_check_flags
+ */
+enum sum_check_bits {
+ SUM_CHECK_P = 0,
+ SUM_CHECK_Q = 1,
+};
+
+/**
+ * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations
+ * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise
+ * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise
+ */
+enum sum_check_flags {
+ SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P),
+ SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q),
+};
+
+
/**
* dma_cap_mask_t - capabilities bitmap modeled after cpumask_t.
* See linux/cpumask.h
* @flags: flags to augment operation preparation, control completion, and
* communicate status
* @phys: physical address of the descriptor
- * @tx_list: driver common field for operations that require multiple
- * descriptors
* @chan: target channel for this operation
* @tx_submit: set the prepared descriptor(s) to be executed by the engine
* @callback: routine to call after this operation is complete
dma_cookie_t cookie;
enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */
dma_addr_t phys;
- struct list_head tx_list;
struct dma_chan *chan;
dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
dma_async_tx_callback callback;
* @global_node: list_head for global dma_device_list
* @cap_mask: one or more dma_capability flags
* @max_xor: maximum number of xor sources, 0 if no capability
+ * @max_pq: maximum number of PQ sources and PQ-continue capability
+ * @copy_align: alignment shift for memcpy operations
+ * @xor_align: alignment shift for xor operations
+ * @pq_align: alignment shift for pq operations
+ * @fill_align: alignment shift for memset operations
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
* @device_alloc_chan_resources: allocate resources and return the
* @device_free_chan_resources: release DMA channel's resources
* @device_prep_dma_memcpy: prepares a memcpy operation
* @device_prep_dma_xor: prepares a xor operation
- * @device_prep_dma_zero_sum: prepares a zero_sum operation
+ * @device_prep_dma_xor_val: prepares a xor validation operation
+ * @device_prep_dma_pq: prepares a pq operation
+ * @device_prep_dma_pq_val: prepares a pqzero_sum operation
* @device_prep_dma_memset: prepares a memset operation
* @device_prep_dma_interrupt: prepares an end of chain interrupt operation
* @device_prep_slave_sg: prepares a slave dma operation
struct list_head channels;
struct list_head global_node;
dma_cap_mask_t cap_mask;
- int max_xor;
+ unsigned short max_xor;
+ unsigned short max_pq;
+ u8 copy_align;
+ u8 xor_align;
+ u8 pq_align;
+ u8 fill_align;
+ #define DMA_HAS_PQ_CONTINUE (1 << 15)
int dev_id;
struct device *dev;
struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
unsigned int src_cnt, size_t len, unsigned long flags);
- struct dma_async_tx_descriptor *(*device_prep_dma_zero_sum)(
+ struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)(
struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt,
- size_t len, u32 *result, unsigned long flags);
+ size_t len, enum sum_check_flags *result, unsigned long flags);
+ struct dma_async_tx_descriptor *(*device_prep_dma_pq)(
+ struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf,
+ size_t len, unsigned long flags);
+ struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)(
+ struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ enum sum_check_flags *pqres, unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_dma_memset)(
struct dma_chan *chan, dma_addr_t dest, int value, size_t len,
unsigned long flags);
void (*device_issue_pending)(struct dma_chan *chan);
};
+static inline bool dmaengine_check_align(u8 align, size_t off1, size_t off2, size_t len)
+{
+ size_t mask;
+
+ if (!align)
+ return true;
+ mask = (1 << align) - 1;
+ if (mask & (off1 | off2 | len))
+ return false;
+ return true;
+}
+
+static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->copy_align, off1, off2, len);
+}
+
+static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->xor_align, off1, off2, len);
+}
+
+static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->pq_align, off1, off2, len);
+}
+
+static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->fill_align, off1, off2, len);
+}
+
+static inline void
+dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue)
+{
+ dma->max_pq = maxpq;
+ if (has_pq_continue)
+ dma->max_pq |= DMA_HAS_PQ_CONTINUE;
+}
+
+static inline bool dmaf_continue(enum dma_ctrl_flags flags)
+{
+ return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE;
+}
+
+static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags)
+{
+ enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P;
+
+ return (flags & mask) == mask;
+}
+
+static inline bool dma_dev_has_pq_continue(struct dma_device *dma)
+{
+ return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
+}
+
+static unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+{
+ return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
+}
+
+/* dma_maxpq - reduce maxpq in the face of continued operations
+ * @dma - dma device with PQ capability
+ * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
+ *
+ * When an engine does not support native continuation we need 3 extra
+ * source slots to reuse P and Q with the following coefficients:
+ * 1/ {00} * P : remove P from Q', but use it as a source for P'
+ * 2/ {01} * Q : use Q to continue Q' calculation
+ * 3/ {00} * Q : subtract Q from P' to cancel (2)
+ *
+ * In the case where P is disabled we only need 1 extra source:
+ * 1/ {01} * Q : use Q to continue Q' calculation
+ */
+static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags)
+{
+ if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags))
+ return dma_dev_to_maxpq(dma);
+ else if (dmaf_p_disabled_continue(flags))
+ return dma_dev_to_maxpq(dma) - 1;
+ else if (dmaf_continue(flags))
+ return dma_dev_to_maxpq(dma) - 3;
+ BUG();
+}
+
/* --- public DMA engine API --- */
#ifdef CONFIG_DMA_ENGINE
#ifdef CONFIG_ASYNC_TX_DMA
#define async_dmaengine_get() dmaengine_get()
#define async_dmaengine_put() dmaengine_put()
+#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX)
+#else
#define async_dma_find_channel(type) dma_find_channel(type)
+#endif /* CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH */
#else
static inline void async_dmaengine_get(void)
{
{
return NULL;
}
-#endif
+#endif /* CONFIG_ASYNC_TX_DMA */
dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan,
void *dest, void *src, size_t len);
#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */
#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */
#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */
+#define FB_ACCEL_PXA3XX 99 /* PXA3xx */
#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */
#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */
int (*launder_page) (struct page *);
int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
unsigned long);
+ int (*error_remove_page)(struct address_space *, struct page *);
};
/*
struct super_block * bd_super;
int bd_openers;
struct mutex bd_mutex; /* open/close mutex */
- struct semaphore bd_mount_sem;
struct list_head bd_inodes;
void * bd_holder;
int bd_holders;
unsigned long s_blocksize;
unsigned char s_blocksize_bits;
unsigned char s_dirt;
- unsigned long long s_maxbytes; /* Max file size */
+ loff_t s_maxbytes; /* Max file size */
struct file_system_type *s_type;
const struct super_operations *s_op;
const struct dquot_operations *dq_op;
extern int inode_needs_sync(struct inode *inode);
extern void generic_delete_inode(struct inode *inode);
extern void generic_drop_inode(struct inode *inode);
+extern int generic_detach_inode(struct inode *inode);
extern struct inode *ilookup5_nowait(struct super_block *sb,
unsigned long hashval, int (*test)(struct inode *, void *),
extern void put_filesystem(struct file_system_type *fs);
extern struct file_system_type *get_fs_type(const char *name);
extern struct super_block *get_super(struct block_device *);
+extern struct super_block *get_active_super(struct block_device *bdev);
extern struct super_block *user_get_super(dev_t);
extern void drop_super(struct super_block *sb);
#define buffer_migrate_page NULL
#endif
-extern int inode_change_ok(struct inode *, struct iattr *);
+extern int inode_change_ok(const struct inode *, struct iattr *);
+extern int inode_newsize_ok(const struct inode *, loff_t offset);
extern int __must_check inode_setattr(struct inode *, struct iattr *);
extern void file_update_time(struct file *file);
size_t len, loff_t *ppos);
struct ctl_table;
-int proc_nr_files(struct ctl_table *table, int write, struct file *filp,
+int proc_nr_files(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
int __init get_filesystem_list(char *buf);
extern int ftrace_enabled;
extern int
ftrace_enable_sysctl(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
extern int stack_tracer_enabled;
int
stack_trace_sysctl(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
#endif
#include <linux/compiler.h>
#include <linux/types.h>
-struct inode;
-struct mm_struct;
-struct task_struct;
-union ktime;
-
/* Second argument to futex syscall */
#define FUTEX_BITSET_MATCH_ANY 0xffffffff
#ifdef __KERNEL__
+struct inode;
+struct mm_struct;
+struct task_struct;
+union ktime;
+
long do_futex(u32 __user *uaddr, int op, u32 val, union ktime *timeout,
u32 __user *uaddr2, u32 val2, u32 val3);
#include <linux/fs.h>
+struct ctl_table;
+struct user_struct;
+
#ifdef CONFIG_HUGETLB_PAGE
#include <linux/mempolicy.h>
#include <linux/shm.h>
#include <asm/tlbflush.h>
-struct ctl_table;
-struct user_struct;
-
int PageHuge(struct page *page);
static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
}
void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
-int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
-int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
-int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
+int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+int hugetlb_treat_movable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *,
struct page **, struct vm_area_struct **,
#define is_file_hugepages(file) 0
#define set_file_hugepages(file) BUG()
-#define hugetlb_file_setup(name,size,acct,user,creat) ERR_PTR(-ENOSYS)
+static inline struct file *hugetlb_file_setup(const char *name, size_t size,
+ int acctflag, struct user_struct **user, int creat_flags)
+{
+ return ERR_PTR(-ENOSYS);
+}
#endif /* !CONFIG_HUGETLBFS */
--- /dev/null
+/*
+ * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ADP5588_H
+#define _ADP5588_H
+
+#define DEV_ID 0x00 /* Device ID */
+#define CFG 0x01 /* Configuration Register1 */
+#define INT_STAT 0x02 /* Interrupt Status Register */
+#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */
+#define Key_EVENTA 0x04 /* Key Event Register A */
+#define Key_EVENTB 0x05 /* Key Event Register B */
+#define Key_EVENTC 0x06 /* Key Event Register C */
+#define Key_EVENTD 0x07 /* Key Event Register D */
+#define Key_EVENTE 0x08 /* Key Event Register E */
+#define Key_EVENTF 0x09 /* Key Event Register F */
+#define Key_EVENTG 0x0A /* Key Event Register G */
+#define Key_EVENTH 0x0B /* Key Event Register H */
+#define Key_EVENTI 0x0C /* Key Event Register I */
+#define Key_EVENTJ 0x0D /* Key Event Register J */
+#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */
+#define UNLOCK1 0x0F /* Unlock Key1 */
+#define UNLOCK2 0x10 /* Unlock Key2 */
+#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */
+#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */
+#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */
+#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */
+#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */
+#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */
+#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */
+#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */
+#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */
+#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */
+#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */
+#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */
+#define GPI_EM1 0x20 /* GPI Event Mode 1 */
+#define GPI_EM2 0x21 /* GPI Event Mode 2 */
+#define GPI_EM3 0x22 /* GPI Event Mode 3 */
+#define GPIO_DIR1 0x23 /* GPIO Data Direction */
+#define GPIO_DIR2 0x24 /* GPIO Data Direction */
+#define GPIO_DIR3 0x25 /* GPIO Data Direction */
+#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */
+#define Debounce_DIS1 0x29 /* Debounce Disable */
+#define Debounce_DIS2 0x2A /* Debounce Disable */
+#define Debounce_DIS3 0x2B /* Debounce Disable */
+#define GPIO_PULL1 0x2C /* GPIO Pull Disable */
+#define GPIO_PULL2 0x2D /* GPIO Pull Disable */
+#define GPIO_PULL3 0x2E /* GPIO Pull Disable */
+#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */
+#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */
+#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
+#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
+#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
+#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
+#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */
+#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
+#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
+#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
+#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
+#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */
+#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */
+#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */
+#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */
+
+#define ADP5588_DEVICE_ID_MASK 0xF
+
+/* Put one of these structures in i2c_board_info platform_data */
+
+#define ADP5588_KEYMAPSIZE 80
+
+struct adp5588_kpad_platform_data {
+ int rows; /* Number of rows */
+ int cols; /* Number of columns */
+ const unsigned short *keymap; /* Pointer to keymap */
+ unsigned short keymapsize; /* Keymap size */
+ unsigned repeat:1; /* Enable key repeat */
+ unsigned en_keylock:1; /* Enable Key Lock feature */
+ unsigned short unlock_key1; /* Unlock Key 1 */
+ unsigned short unlock_key2; /* Unlock Key 2 */
+};
+
+#endif
--- /dev/null
+/*
+ * mcs5000_ts.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MCS5000_TS_H
+#define __LINUX_MCS5000_TS_H
+
+/* platform data for the MELFAS MCS-5000 touchscreen driver */
+struct mcs5000_ts_platform_data {
+ void (*cfg_pin)(void);
+ int x_size;
+ int y_size;
+};
+
+#endif /* __LINUX_MCS5000_TS_H */
* the Free Software Foundation.
*/
+#include <linux/types.h>
/*
* Standard commands.
#define I8042_CMD_MUX_PFX 0x0090
#define I8042_CMD_MUX_SEND 0x1090
+struct serio;
+
+#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
+
+void i8042_lock_chip(void);
+void i8042_unlock_chip(void);
int i8042_command(unsigned char *param, int command);
+bool i8042_check_port_owner(const struct serio *);
+
+#else
+
+void i8042_lock_chip(void)
+{
+}
+
+void i8042_unlock_chip(void)
+{
+}
+
+int i8042_command(unsigned char *param, int command)
+{
+ return -ENOSYS;
+}
+
+bool i8042_check_port_owner(const struct serio *serio)
+{
+ return false;
+}
+
+#endif
#endif
struct mutex mutex;
unsigned int users;
- int going_away;
+ bool going_away;
struct device dev;
* struct irqaction - per interrupt action descriptor
* @handler: interrupt handler function
* @flags: flags (see IRQF_* above)
- * @mask: no comment as it is useless and about to be removed
* @name: name of the device
* @dev_id: cookie to identify the device
* @next: pointer to the next irqaction for shared interrupts
struct irqaction {
irq_handler_t handler;
unsigned long flags;
- cpumask_t mask;
const char *name;
void *dev_id;
struct irqaction *next;
void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
+void ps2_begin_command(struct ps2dev *ps2dev);
+void ps2_end_command(struct ps2dev *ps2dev);
int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
#ifdef __ASSEMBLY__
+#ifndef LINKER_SCRIPT
#define ALIGN __ALIGN
#define ALIGN_STR __ALIGN_STR
ALIGN; \
name:
#endif
+#endif /* LINKER_SCRIPT */
#ifndef WEAK
#define WEAK(name) \
extern bool mem_cgroup_oom_called(struct task_struct *task);
void mem_cgroup_update_mapped_file_stat(struct page *page, int val);
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+ gfp_t gfp_mask, int nid,
+ int zid);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct mem_cgroup;
{
}
+static inline
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+ gfp_t gfp_mask, int nid, int zid)
+{
+ return 0;
+}
+
#endif /* CONFIG_CGROUP_MEM_CONT */
#endif /* _LINUX_MEMCONTROL_H */
#ifdef CONFIG_MMU
extern int is_vmalloc_or_module_addr(const void *x);
#else
-static int is_vmalloc_or_module_addr(const void *x)
+static inline int is_vmalloc_or_module_addr(const void *x)
{
return 0;
}
#define VM_FAULT_SIGBUS 0x0002
#define VM_FAULT_MAJOR 0x0004
#define VM_FAULT_WRITE 0x0008 /* Special case for get_user_pages */
+#define VM_FAULT_HWPOISON 0x0010 /* Hit poisoned page */
#define VM_FAULT_NOPAGE 0x0100 /* ->fault installed the pte, not return page */
#define VM_FAULT_LOCKED 0x0200 /* ->fault locked the returned page */
-#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS)
+#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON)
/*
* Can be called by the pagefault handler when it gets a VM_FAULT_OOM.
unmap_mapping_range(mapping, holebegin, holelen, 0);
}
-extern int vmtruncate(struct inode * inode, loff_t offset);
-extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end);
+extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new);
+extern int vmtruncate(struct inode *inode, loff_t offset);
+extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end);
+
+int truncate_inode_page(struct address_space *mapping, struct page *page);
+int generic_error_remove_page(struct address_space *mapping, struct page *page);
+
+int invalidate_inode_page(struct page *page);
#ifdef CONFIG_MMU
extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
#define in_gate_area(task, addr) ({(void)task; in_gate_area_no_task(addr);})
#endif /* __HAVE_ARCH_GATE_AREA */
-int drop_caches_sysctl_handler(struct ctl_table *, int, struct file *,
+int drop_caches_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask,
unsigned long lru_pages);
extern int account_locked_memory(struct mm_struct *mm, struct rlimit *rlim,
size_t size);
extern void refund_locked_memory(struct mm_struct *mm, size_t size);
+
+extern void memory_failure(unsigned long pfn, int trapno);
+extern int __memory_failure(unsigned long pfn, int trapno, int ref);
+extern int sysctl_memory_failure_early_kill;
+extern int sysctl_memory_failure_recovery;
+extern atomic_long_t mce_bad_pages;
+
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
+ struct linux_binfmt *binfmt;
+
cpumask_t cpu_vm_mask;
/* Architecture-specific MM context */
unsigned long flags; /* Must use atomic bitops to access the bits */
struct core_state *core_state; /* coredumping support */
-
- /* aio bits */
+#ifdef CONFIG_AIO
spinlock_t ioctx_lock;
struct hlist_head ioctx_list;
-
+#endif
#ifdef CONFIG_MM_OWNER
/*
* "owner" points to a task that is regarded as the canonical
/* These two functions are used to setup the per zone pages min values */
struct ctl_table;
-struct file;
-int min_free_kbytes_sysctl_handler(struct ctl_table *, int, struct file *,
+int min_free_kbytes_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1];
-int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, struct file *,
+int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int, struct file *,
+int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
extern int numa_zonelist_order_handler(struct ctl_table *, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
extern char numa_zonelist_order[];
#define NUMA_ZONELIST_ORDER_LEN 16 /* string buffer size */
*/
#define MODULE_LICENSE(_license) MODULE_INFO(license, _license)
-/* Author, ideally of form NAME[, NAME]*[ and NAME] */
+/*
+ * Author(s), use "Name <email>" or just "Name", for multiple
+ * authors use multiple MODULE_AUTHOR() statements/lines.
+ */
#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
/* What your module does. */
#endif
#ifdef CONFIG_KALLSYMS
- /* We keep the symbol and string tables for kallsyms. */
- Elf_Sym *symtab;
- unsigned int num_symtab;
- char *strtab;
+ /*
+ * We keep the symbol and string tables for kallsyms.
+ * The core_* fields below are temporary, loader-only (they
+ * could really be discarded after module init).
+ */
+ Elf_Sym *symtab, *core_symtab;
+ unsigned int num_symtab, core_num_syms;
+ char *strtab, *core_strtab;
/* Section attributes */
struct module_sect_attrs *sect_attrs;
extern void netlink_kernel_release(struct sock *sk);
extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups);
extern int netlink_change_ngroups(struct sock *sk, unsigned int groups);
+extern void __netlink_clear_multicast_users(struct sock *sk, unsigned int group);
extern void netlink_clear_multicast_users(struct sock *sk, unsigned int group);
extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err);
extern int netlink_has_listeners(struct sock *sk, unsigned int group);
* PG_buddy is set to indicate that the page is free and in the buddy system
* (see mm/page_alloc.c).
*
+ * PG_hwpoison indicates that a page got corrupted in hardware and contains
+ * data with incorrect ECC bits that triggered a machine check. Accessing is
+ * not safe since it may cause another machine check. Don't touch!
*/
/*
#endif
#ifdef CONFIG_ARCH_USES_PG_UNCACHED
PG_uncached, /* Page has been mapped as uncached */
+#endif
+#ifdef CONFIG_MEMORY_FAILURE
+ PG_hwpoison, /* hardware poisoned page. Don't touch */
#endif
__NR_PAGEFLAGS,
PAGEFLAG_FALSE(Uncached)
#endif
+#ifdef CONFIG_MEMORY_FAILURE
+PAGEFLAG(HWPoison, hwpoison)
+TESTSETFLAG(HWPoison, hwpoison)
+#define __PG_HWPOISON (1UL << PG_hwpoison)
+#else
+PAGEFLAG_FALSE(HWPoison)
+#define __PG_HWPOISON 0
+#endif
+
static inline int PageUptodate(struct page *page)
{
int ret = test_bit(PG_uptodate, &(page)->flags);
1 << PG_private | 1 << PG_private_2 | \
1 << PG_buddy | 1 << PG_writeback | 1 << PG_reserved | \
1 << PG_slab | 1 << PG_swapcache | 1 << PG_active | \
- 1 << PG_unevictable | __PG_MLOCKED)
+ 1 << PG_unevictable | __PG_MLOCKED | __PG_HWPOISON)
/*
* Flags checked when a page is prepped for return by the page allocator.
PCG_LOCK, /* page cgroup is locked */
PCG_CACHE, /* charged as cache */
PCG_USED, /* this object is in use. */
+ PCG_ACCT_LRU, /* page has been accounted for */
};
#define TESTPCGFLAG(uname, lname) \
static inline void ClearPageCgroup##uname(struct page_cgroup *pc) \
{ clear_bit(PCG_##lname, &pc->flags); }
+#define TESTCLEARPCGFLAG(uname, lname) \
+static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \
+ { return test_and_clear_bit(PCG_##lname, &pc->flags); }
+
/* Cache flag is set only once (at allocation) */
TESTPCGFLAG(Cache, CACHE)
+CLEARPCGFLAG(Cache, CACHE)
+SETPCGFLAG(Cache, CACHE)
TESTPCGFLAG(Used, USED)
CLEARPCGFLAG(Used, USED)
+SETPCGFLAG(Used, USED)
+
+SETPCGFLAG(AcctLRU, ACCT_LRU)
+CLEARPCGFLAG(AcctLRU, ACCT_LRU)
+TESTPCGFLAG(AcctLRU, ACCT_LRU)
+TESTCLEARPCGFLAG(AcctLRU, ACCT_LRU)
static inline int page_cgroup_nid(struct page_cgroup *pc)
{
#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e
#define PCI_DEVICE_ID_INTEL_IOAT_CNB 0x360b
#define PCI_DEVICE_ID_INTEL_FBD_CNB 0x360c
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF0 0x3710
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF1 0x3711
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF2 0x3712
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF3 0x3713
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF4 0x3714
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF5 0x3715
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF6 0x3716
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF7 0x3717
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF8 0x3718
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF9 0x3719
#define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14
#define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16
#define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18
#define PNPIPE_IFINDEX 2
#define PNADDR_ANY 0
+#define PNADDR_BROADCAST 0xFC
#define PNPORT_RESOURCE_ROUTING 0
/* Values for PNPIPE_ENCAP option */
#define PR_TASK_PERF_EVENTS_DISABLE 31
#define PR_TASK_PERF_EVENTS_ENABLE 32
+#define PR_MCE_KILL 33
+
#endif /* _LINUX_PRCTL_H */
* cause relay_open() to create a single global buffer rather
* than the default set of per-cpu buffers.
*
- * See Documentation/filesystems/relayfs.txt for more info.
+ * See Documentation/filesystems/relay.txt for more info.
*/
struct dentry *(*create_buf_file)(const char *filename,
struct dentry *parent,
* the limit that usage cannot exceed
*/
unsigned long long limit;
+ /*
+ * the limit that usage can be exceed
+ */
+ unsigned long long soft_limit;
/*
* the number of unsuccessful attempts to consume the resource
*/
RES_MAX_USAGE,
RES_LIMIT,
RES_FAILCNT,
+ RES_SOFT_LIMIT,
};
/*
int __must_check res_counter_charge_locked(struct res_counter *counter,
unsigned long val);
int __must_check res_counter_charge(struct res_counter *counter,
- unsigned long val, struct res_counter **limit_fail_at);
+ unsigned long val, struct res_counter **limit_fail_at,
+ struct res_counter **soft_limit_at);
/*
* uncharge - tell that some portion of the resource is released
*/
void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val);
-void res_counter_uncharge(struct res_counter *counter, unsigned long val);
+void res_counter_uncharge(struct res_counter *counter, unsigned long val,
+ bool *was_soft_limit_excess);
static inline bool res_counter_limit_check_locked(struct res_counter *cnt)
{
return false;
}
+static inline bool res_counter_soft_limit_check_locked(struct res_counter *cnt)
+{
+ if (cnt->usage < cnt->soft_limit)
+ return true;
+
+ return false;
+}
+
+/**
+ * Get the difference between the usage and the soft limit
+ * @cnt: The counter
+ *
+ * Returns 0 if usage is less than or equal to soft limit
+ * The difference between usage and soft limit, otherwise.
+ */
+static inline unsigned long long
+res_counter_soft_limit_excess(struct res_counter *cnt)
+{
+ unsigned long long excess;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cnt->lock, flags);
+ if (cnt->usage <= cnt->soft_limit)
+ excess = 0;
+ else
+ excess = cnt->usage - cnt->soft_limit;
+ spin_unlock_irqrestore(&cnt->lock, flags);
+ return excess;
+}
+
/*
* Helper function to detect if the cgroup is within it's limit or
* not. It's currently called from cgroup_rss_prepare()
return ret;
}
+static inline bool res_counter_check_under_soft_limit(struct res_counter *cnt)
+{
+ bool ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cnt->lock, flags);
+ ret = res_counter_soft_limit_check_locked(cnt);
+ spin_unlock_irqrestore(&cnt->lock, flags);
+ return ret;
+}
+
static inline void res_counter_reset_max(struct res_counter *cnt)
{
unsigned long flags;
return ret;
}
+static inline int
+res_counter_set_soft_limit(struct res_counter *cnt,
+ unsigned long long soft_limit)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cnt->lock, flags);
+ cnt->soft_limit = soft_limit;
+ spin_unlock_irqrestore(&cnt->lock, flags);
+ return 0;
+}
+
#endif
*/
int page_referenced(struct page *, int is_locked,
struct mem_cgroup *cnt, unsigned long *vm_flags);
-int try_to_unmap(struct page *, int ignore_refs);
+enum ttu_flags {
+ TTU_UNMAP = 0, /* unmap mode */
+ TTU_MIGRATION = 1, /* migration mode */
+ TTU_MUNLOCK = 2, /* munlock mode */
+ TTU_ACTION_MASK = 0xff,
+
+ TTU_IGNORE_MLOCK = (1 << 8), /* ignore mlock */
+ TTU_IGNORE_ACCESS = (1 << 9), /* don't age */
+ TTU_IGNORE_HWPOISON = (1 << 10),/* corrupted page is recoverable */
+};
+#define TTU_ACTION(x) ((x) & TTU_ACTION_MASK)
+
+int try_to_unmap(struct page *, enum ttu_flags flags);
/*
* Called from mm/filemap_xip.c to unmap empty zero page
*/
int try_to_munlock(struct page *);
+/*
+ * Called by memory-failure.c to kill processes.
+ */
+struct anon_vma *page_lock_anon_vma(struct page *page);
+void page_unlock_anon_vma(struct anon_vma *anon_vma);
+int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma);
+
#else /* !CONFIG_MMU */
#define anon_vma_init() do {} while (0)
extern void touch_softlockup_watchdog(void);
extern void touch_all_softlockup_watchdogs(void);
extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos);
extern unsigned int softlockup_panic;
extern int softlockup_thresh;
extern unsigned long sysctl_hung_task_timeout_secs;
extern unsigned long sysctl_hung_task_warnings;
extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos);
#endif
struct mm_struct *mm, *active_mm;
/* task state */
- struct linux_binfmt *binfmt;
int exit_state;
int exit_code, exit_signal;
int pdeath_signal; /* The signal sent when the parent dies */
#define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */
#define PF_VCPU 0x00000010 /* I'm a virtual CPU */
#define PF_FORKNOEXEC 0x00000040 /* forked but didn't exec */
+#define PF_MCE_PROCESS 0x00000080 /* process policy on mce errors */
#define PF_SUPERPRIV 0x00000100 /* used super-user privileges */
#define PF_DUMPCORE 0x00000200 /* dumped core */
#define PF_SIGNALED 0x00000400 /* killed by a signal */
#define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */
#define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */
#define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */
+#define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */
#define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */
#define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */
#define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */
return 0;
}
#endif
+
+#ifndef CONFIG_CPUMASK_OFFSTACK
static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
{
return set_cpus_allowed_ptr(p, &new_mask);
}
+#endif
/*
* Architectures can set this to 1 if they have specified
extern unsigned int sysctl_timer_migration;
int sched_nr_latency_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length,
+ void __user *buffer, size_t *length,
loff_t *ppos);
#endif
#ifdef CONFIG_SCHED_DEBUG
extern int sysctl_sched_rt_runtime;
int sched_rt_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern unsigned int sysctl_sched_compat_yield;
extern int kill_pid(struct pid *pid, int sig, int priv);
extern int kill_proc_info(int, struct siginfo *, pid_t);
extern int do_notify_parent(struct task_struct *, int);
+extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent);
extern void force_sig(int, struct task_struct *);
extern void force_sig_specific(int, struct task_struct *);
extern int send_sig(int, struct task_struct *, int);
return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
}
-extern int __fatal_signal_pending(struct task_struct *p);
+static inline int __fatal_signal_pending(struct task_struct *p)
+{
+ return unlikely(sigismember(&p->pending.signal, SIGKILL));
+}
static inline int fatal_signal_pending(struct task_struct *p)
{
return PAGE_ALIGN(mmap_min_addr);
return hint;
}
-extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+extern int mmap_min_addr_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
#ifdef CONFIG_SECURITY
#define SEQ_SKIP 1
+/**
+ * seq_get_buf - get buffer to write arbitrary data to
+ * @m: the seq_file handle
+ * @bufp: the beginning of the buffer is stored here
+ *
+ * Return the number of bytes available in the buffer, or zero if
+ * there's no space.
+ */
+static inline size_t seq_get_buf(struct seq_file *m, char **bufp)
+{
+ BUG_ON(m->count > m->size);
+ if (m->count < m->size)
+ *bufp = m->buf + m->count;
+ else
+ *bufp = NULL;
+
+ return m->size - m->count;
+}
+
+/**
+ * seq_commit - commit data to the buffer
+ * @m: the seq_file handle
+ * @num: the number of bytes to commit
+ *
+ * Commit @num bytes of data written to a buffer previously acquired
+ * by seq_buf_get. To signal an error condition, or that the data
+ * didn't fit in the available space, pass a negative @num value.
+ */
+static inline void seq_commit(struct seq_file *m, int num)
+{
+ if (num < 0) {
+ m->count = m->size;
+ } else {
+ BUG_ON(m->count + num > m->size);
+ m->count += num;
+ }
+}
+
char *mangle_path(char *s, char *p, char *esc);
int seq_open(struct file *, const struct seq_operations *);
ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
}
extern int next_signal(struct sigpending *pending, sigset_t *mask);
+extern int do_send_sig_info(int sig, struct siginfo *info,
+ struct task_struct *p, bool group);
extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
void smp_call_function_many(const struct cpumask *mask,
void (*func)(void *info), void *info, bool wait);
-/* Deprecated: Use smp_call_function_many which takes a pointer to the mask. */
-static inline int
-smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info,
- int wait)
-{
- smp_call_function_many(&mask, func, info, wait);
- return 0;
-}
-
void __smp_call_function_single(int cpuid, struct call_single_data *data,
int wait);
static inline void smp_send_reschedule(int cpu) { }
#define num_booting_cpus() 1
#define smp_prepare_boot_cpu() do {} while (0)
-#define smp_call_function_mask(mask, func, info, wait) \
- (up_smp_call_function(func, info))
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
static inline void init_call_single_data(void)
#include <linux/uio.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <linux/scatterlist.h>
/*
static inline __be32 *
xdr_encode_hyper(__be32 *p, __u64 val)
{
- *(__be64 *)p = cpu_to_be64(val);
+ put_unaligned_be64(val, p);
return p + 2;
}
static inline __be32 *
xdr_decode_hyper(__be32 *p, __u64 *valp)
{
- *valp = be64_to_cpup((__be64 *)p);
+ *valp = get_unaligned_be64(p);
return p + 2;
}
* the type/offset into the pte as 5/27 as well.
*/
#define MAX_SWAPFILES_SHIFT 5
-#ifndef CONFIG_MIGRATION
-#define MAX_SWAPFILES (1 << MAX_SWAPFILES_SHIFT)
+
+/*
+ * Use some of the swap files numbers for other purposes. This
+ * is a convenient way to hook into the VM to trigger special
+ * actions on faults.
+ */
+
+/*
+ * NUMA node memory migration support
+ */
+#ifdef CONFIG_MIGRATION
+#define SWP_MIGRATION_NUM 2
+#define SWP_MIGRATION_READ (MAX_SWAPFILES + SWP_HWPOISON_NUM)
+#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + SWP_HWPOISON_NUM + 1)
#else
-/* Use last two entries for page migration swap entries */
-#define MAX_SWAPFILES ((1 << MAX_SWAPFILES_SHIFT)-2)
-#define SWP_MIGRATION_READ MAX_SWAPFILES
-#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + 1)
+#define SWP_MIGRATION_NUM 0
#endif
+/*
+ * Handling of hardware poisoned pages with memory corruption.
+ */
+#ifdef CONFIG_MEMORY_FAILURE
+#define SWP_HWPOISON_NUM 1
+#define SWP_HWPOISON MAX_SWAPFILES
+#else
+#define SWP_HWPOISON_NUM 0
+#endif
+
+#define MAX_SWAPFILES \
+ ((1 << MAX_SWAPFILES_SHIFT) - SWP_MIGRATION_NUM - SWP_HWPOISON_NUM)
+
/*
* Magic header for a swap area. The first part of the union is
* what the swap magic looks like for the old (limited to 128MB)
extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
gfp_t gfp_mask, bool noswap,
unsigned int swappiness);
+extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap,
+ unsigned int swappiness,
+ struct zone *zone,
+ int nid);
extern int __isolate_lru_page(struct page *page, int mode, int file);
extern unsigned long shrink_all_memory(unsigned long nr_pages);
extern int vm_swappiness;
extern void scan_mapping_unevictable_pages(struct address_space *);
extern unsigned long scan_unevictable_pages;
-extern int scan_unevictable_handler(struct ctl_table *, int, struct file *,
+extern int scan_unevictable_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
extern int scan_unevictable_register_node(struct node *node);
extern void scan_unevictable_unregister_node(struct node *node);
#endif
+#ifdef CONFIG_MEMORY_FAILURE
+/*
+ * Support for hardware poisoned pages
+ */
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+ BUG_ON(!PageLocked(page));
+ return swp_entry(SWP_HWPOISON, page_to_pfn(page));
+}
+
+static inline int is_hwpoison_entry(swp_entry_t entry)
+{
+ return swp_type(entry) == SWP_HWPOISON;
+}
+#else
+
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+ return swp_entry(0, 0);
+}
+
+static inline int is_hwpoison_entry(swp_entry_t swp)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION)
+static inline int non_swap_entry(swp_entry_t entry)
+{
+ return swp_type(entry) >= MAX_SWAPFILES;
+}
+#else
+static inline int non_swap_entry(swp_entry_t entry)
+{
+ return 0;
+}
+#endif
#include <linux/types.h>
#include <linux/compiler.h>
-struct file;
struct completion;
#define CTL_MAXNAME 10 /* how many path components do we allow in a
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen);
-typedef int proc_handler (struct ctl_table *ctl, int write, struct file * filp,
+typedef int proc_handler (struct ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
-extern int proc_dostring(struct ctl_table *, int, struct file *,
+extern int proc_dostring(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec(struct ctl_table *, int, struct file *,
+extern int proc_dointvec(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_minmax(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_minmax(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_jiffies(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_jiffies(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_ms_jiffies(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_ms_jiffies(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_doulongvec_minmax(struct ctl_table *, int, struct file *,
+extern int proc_doulongvec_minmax(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
extern int do_sysctl (int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
struct tms;
extern void do_sys_times(struct tms *);
+/*
+ * Similar to the struct tm in userspace <time.h>, but it needs to be here so
+ * that the kernel source is self contained.
+ */
+struct tm {
+ /*
+ * the number of seconds after the minute, normally in the range
+ * 0 to 59, but can be up to 60 to allow for leap seconds
+ */
+ int tm_sec;
+ /* the number of minutes after the hour, in the range 0 to 59*/
+ int tm_min;
+ /* the number of hours past midnight, in the range 0 to 23 */
+ int tm_hour;
+ /* the day of the month, in the range 1 to 31 */
+ int tm_mday;
+ /* the number of months since January, in the range 0 to 11 */
+ int tm_mon;
+ /* the number of years since 1900 */
+ long tm_year;
+ /* the number of days since Sunday, in the range 0 to 6 */
+ int tm_wday;
+ /* the number of days since January 1, in the range 0 to 365 */
+ int tm_yday;
+};
+
+void time_to_tm(time_t totalsecs, int offset, struct tm *result);
+
/**
* timespec_to_ns - Convert timespec to nanoseconds
* @ts: pointer to the timespec variable to be converted
#ifndef topology_core_id
#define topology_core_id(cpu) ((void)(cpu), 0)
#endif
-#ifndef topology_thread_siblings
-#define topology_thread_siblings(cpu) cpumask_of_cpu(cpu)
-#endif
-#ifndef topology_core_siblings
-#define topology_core_siblings(cpu) cpumask_of_cpu(cpu)
-#endif
#ifndef topology_thread_cpumask
#define topology_thread_cpumask(cpu) cpumask_of(cpu)
#endif
/*
* Tracing hooks
*
- * Copyright (C) 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
/**
* tracehook_notify_jctl - report about job control stop/continue
- * @notify: nonzero if this is the last thread in the group to stop
+ * @notify: zero, %CLD_STOPPED or %CLD_CONTINUED
* @why: %CLD_STOPPED or %CLD_CONTINUED
*
* This is called when we might call do_notify_parent_cldstop().
- * It's called when about to stop for job control; we are already in
- * %TASK_STOPPED state, about to call schedule(). It's also called when
- * a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made.
*
- * Return nonzero to generate a %SIGCHLD with @why, which is
- * normal if @notify is nonzero.
+ * @notify is zero if we would not ordinarily send a %SIGCHLD,
+ * or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD.
*
- * Called with no locks held.
+ * @why is %CLD_STOPPED when about to stop for job control;
+ * we are already in %TASK_STOPPED state, about to call schedule().
+ * It might also be that we have just exited (check %PF_EXITING),
+ * but need to report that a group-wide stop is complete.
+ *
+ * @why is %CLD_CONTINUED when waking up after job control stop and
+ * ready to make a delayed @notify report.
+ *
+ * Return the %CLD_* value for %SIGCHLD, or zero to generate no signal.
+ *
+ * Called with the siglock held.
*/
static inline int tracehook_notify_jctl(int notify, int why)
{
- return notify || (current->ptrace & PT_PTRACED);
+ return notify ?: (current->ptrace & PT_PTRACED) ? why : 0;
+}
+
+/**
+ * tracehook_finish_jctl - report about return from job control stop
+ *
+ * This is called by do_signal_stop() after wakeup.
+ */
+static inline void tracehook_finish_jctl(void)
+{
}
#define DEATH_REAP -1
/*
* Kernel Tracepoint API.
*
- * See Documentation/tracepoint.txt.
+ * See Documentation/trace/tracepoints.txt.
*
* (C) Copyright 2008 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
*
#ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H
#define _LINUX_UNALIGNED_BE_BYTESHIFT_H
-#include <linux/kernel.h>
+#include <linux/types.h>
static inline u16 __get_unaligned_be16(const u8 *p)
{
#ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H
#define _LINUX_UNALIGNED_LE_BYTESHIFT_H
-#include <linux/kernel.h>
+#include <linux/types.h>
static inline u16 __get_unaligned_le16(const u8 *p)
{
#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */
+#define FLAG_SEND_ZLP 0x0200 /* hw requires ZLPs are sent */
/* init device ... can sleep, or cause probe() failure */
#include <linux/kref.h>
#include <linux/nsproxy.h>
#include <linux/err.h>
-#include <asm/atomic.h>
struct uts_namespace {
struct kref kref;
/*
- * vgaarb.c
+ * The VGA aribiter manages VGA space routing and VGA resource decode to
+ * allow multiple VGA devices to be used in a system in a safe way.
*
* (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
extern unsigned long determine_dirtyable_memory(void);
extern int dirty_background_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern int dirty_background_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern int dirty_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern int dirty_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
struct ctl_table;
-struct file;
-int dirty_writeback_centisecs_handler(struct ctl_table *, int, struct file *,
+int dirty_writeback_centisecs_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
void get_dirty_limits(unsigned long *pbackground, unsigned long *pdirty,
* @P9_DEBUG_SLABS: memory management tracing
* @P9_DEBUG_FCALL: verbose dump of protocol messages
* @P9_DEBUG_FID: fid allocation/deallocation tracking
+ * @P9_DEBUG_PKT: packet marshalling/unmarshalling
+ * @P9_DEBUG_FSC: FS-cache tracing
*
* These flags are passed at mount time to turn on various levels of
* verbosity and tracing which will be output to the system logs.
P9_DEBUG_FCALL = (1<<8),
P9_DEBUG_FID = (1<<9),
P9_DEBUG_PKT = (1<<10),
+ P9_DEBUG_FSC = (1<<11),
};
#ifdef CONFIG_NET_9P_DEBUG
* fed into the routing cache should use these handlers.
*/
int ipv4_doint_and_flush(ctl_table *ctl, int write,
- struct file* filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos);
int ipv4_doint_and_flush_strategy(ctl_table *table,
void __user *oldval, size_t __user *oldlenp,
struct ip_tunnel *next;
struct net_device *dev;
- int recursion; /* Depth of hard_start_xmit recursion */
int err_count; /* Number of arrived ICMP errors */
unsigned long err_time; /* Time when the last ICMP error arrived */
#include <net/neighbour.h>
struct ctl_table;
-struct file;
struct inet6_dev;
struct net_device;
struct net_proto_family;
#ifdef CONFIG_SYSCTL
extern int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl,
int write,
- struct file * filp,
void __user *buffer,
size_t *lenp,
loff_t *ppos);
SLUB sysfs support. /sys/slab will not exist and there will be
no support for cache validation etc.
-config STRIP_ASM_SYMS
- bool "Strip assembler-generated symbols during link"
- default n
- help
- Strip internal assembler-generated symbols during a link (symbols
- that look like '.Lxxx') so they don't pollute the output of
- get_wchan() and suchlike.
-
config COMPAT_BRK
bool "Disable heap randomization"
default y
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/delay.h>
-#include <linux/utsname.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#else
-#if NR_CPUS > BITS_PER_LONG
-cpumask_t cpu_mask_all __read_mostly = CPU_MASK_ALL;
-EXPORT_SYMBOL(cpu_mask_all);
-#endif
-
/* Setup number of possible processor ids */
int nr_cpu_ids __read_mostly = NR_CPUS;
EXPORT_SYMBOL(nr_cpu_ids);
}
#ifdef CONFIG_PROC_SYSCTL
-static int proc_ipc_dointvec(ctl_table *table, int write, struct file *filp,
+static int proc_ipc_dointvec(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
memcpy(&ipc_table, table, sizeof(ipc_table));
ipc_table.data = get_ipc(table);
- return proc_dointvec(&ipc_table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(&ipc_table, write, buffer, lenp, ppos);
}
static int proc_ipc_callback_dointvec(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
size_t lenp_bef = *lenp;
memcpy(&ipc_table, table, sizeof(ipc_table));
ipc_table.data = get_ipc(table);
- rc = proc_dointvec(&ipc_table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec(&ipc_table, write, buffer, lenp, ppos);
if (write && !rc && lenp_bef == *lenp)
/*
}
static int proc_ipc_doulongvec_minmax(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
memcpy(&ipc_table, table, sizeof(ipc_table));
ipc_table.data = get_ipc(table);
- return proc_doulongvec_minmax(&ipc_table, write, filp, buffer,
+ return proc_doulongvec_minmax(&ipc_table, write, buffer,
lenp, ppos);
}
}
static int proc_ipcauto_dointvec_minmax(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
size_t lenp_bef = *lenp;
ipc_table.data = get_ipc(table);
oldval = *((int *)(ipc_table.data));
- rc = proc_dointvec_minmax(&ipc_table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec_minmax(&ipc_table, write, buffer, lenp, ppos);
if (write && !rc && lenp_bef == *lenp) {
int newval = *((int *)(ipc_table.data));
return which;
}
-static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp,
+static int proc_mq_dointvec(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table mq_table;
memcpy(&mq_table, table, sizeof(mq_table));
mq_table.data = get_mq(table);
- return proc_dointvec(&mq_table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(&mq_table, write, buffer, lenp, ppos);
}
static int proc_mq_dointvec_minmax(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table mq_table;
memcpy(&mq_table, table, sizeof(mq_table));
mq_table.data = get_mq(table);
- return proc_dointvec_minmax(&mq_table, write, filp, buffer,
+ return proc_dointvec_minmax(&mq_table, write, buffer,
lenp, ppos);
}
#else
obj-$(CONFIG_BACKTRACE_SELF_TEST) += backtracetest.o
obj-$(CONFIG_COMPAT) += compat.o
obj-$(CONFIG_CGROUPS) += cgroup.o
-obj-$(CONFIG_CGROUP_DEBUG) += cgroup_debug.o
obj-$(CONFIG_CGROUP_FREEZER) += cgroup_freezer.o
obj-$(CONFIG_CPUSETS) += cpuset.o
obj-$(CONFIG_CGROUP_NS) += ns_cgroup.o
break;
}
case AUDIT_SIGNAL_INFO:
- err = security_secid_to_secctx(audit_sig_sid, &ctx, &len);
- if (err)
- return err;
+ len = 0;
+ if (audit_sig_sid) {
+ err = security_secid_to_secctx(audit_sig_sid, &ctx, &len);
+ if (err)
+ return err;
+ }
sig_data = kmalloc(sizeof(*sig_data) + len, GFP_KERNEL);
if (!sig_data) {
- security_release_secctx(ctx, len);
+ if (audit_sig_sid)
+ security_release_secctx(ctx, len);
return -ENOMEM;
}
sig_data->uid = audit_sig_uid;
sig_data->pid = audit_sig_pid;
- memcpy(sig_data->ctx, ctx, len);
- security_release_secctx(ctx, len);
+ if (audit_sig_sid) {
+ memcpy(sig_data->ctx, ctx, len);
+ security_release_secctx(ctx, len);
+ }
audit_send_reply(NETLINK_CB(skb).pid, seq, AUDIT_SIGNAL_INFO,
0, 0, sig_data, sizeof(*sig_data) + len);
kfree(sig_data);
struct audit_watch {
atomic_t count; /* reference count */
- char *path; /* insertion path */
dev_t dev; /* associated superblock device */
+ char *path; /* insertion path */
unsigned long ino; /* associated inode number */
struct audit_parent *parent; /* associated parent */
struct list_head wlist; /* entry in parent->watches list */
int in_syscall; /* 1 if task is in a syscall */
enum audit_state state, current_state;
unsigned int serial; /* serial number for record */
- struct timespec ctime; /* time of syscall entry */
int major; /* syscall number */
+ struct timespec ctime; /* time of syscall entry */
unsigned long argv[4]; /* syscall arguments */
- int return_valid; /* return code is valid */
long return_code;/* syscall return code */
u64 prio;
+ int return_valid; /* return code is valid */
int name_count;
struct audit_names names[AUDIT_NAMES];
char * filterkey; /* key for rule that triggered record */
char target_comm[TASK_COMM_LEN];
struct audit_tree_refs *trees, *first_trees;
- int tree_count;
struct list_head killed_trees;
+ int tree_count;
int type;
union {
*/
#include <linux/cgroup.h>
+#include <linux/ctype.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/namei.h>
#include <linux/smp_lock.h>
#include <linux/pid_namespace.h>
+#include <linux/idr.h>
+#include <linux/vmalloc.h> /* TODO: replace with more sophisticated array */
#include <asm/atomic.h>
#include <linux/cgroup_subsys.h>
};
+#define MAX_CGROUP_ROOT_NAMELEN 64
+
/*
* A cgroupfs_root represents the root of a cgroup hierarchy,
* and may be associated with a superblock to form an active
*/
unsigned long subsys_bits;
+ /* Unique id for this hierarchy. */
+ int hierarchy_id;
+
/* The bitmask of subsystems currently attached to this hierarchy */
unsigned long actual_subsys_bits;
/* The path to use for release notifications. */
char release_agent_path[PATH_MAX];
+
+ /* The name for this hierarchy - may be empty */
+ char name[MAX_CGROUP_ROOT_NAMELEN];
};
/*
static LIST_HEAD(roots);
static int root_count;
+static DEFINE_IDA(hierarchy_ida);
+static int next_hierarchy_id;
+static DEFINE_SPINLOCK(hierarchy_id_lock);
+
/* dummytop is a shorthand for the dummy hierarchy's top cgroup */
#define dummytop (&rootnode.top_cgroup)
* cgroup, anchored on cgroup->css_sets
*/
struct list_head cgrp_link_list;
+ struct cgroup *cgrp;
/*
* List running through cg_cgroup_links pointing at a
* single css_set object, anchored on css_set->cg_links
static DEFINE_RWLOCK(css_set_lock);
static int css_set_count;
-/* hash table for cgroup groups. This improves the performance to
- * find an existing css_set */
+/*
+ * hash table for cgroup groups. This improves the performance to find
+ * an existing css_set. This hash doesn't (currently) take into
+ * account cgroups in empty hierarchies.
+ */
#define CSS_SET_HASH_BITS 7
#define CSS_SET_TABLE_SIZE (1 << CSS_SET_HASH_BITS)
static struct hlist_head css_set_table[CSS_SET_TABLE_SIZE];
return &css_set_table[index];
}
+static void free_css_set_rcu(struct rcu_head *obj)
+{
+ struct css_set *cg = container_of(obj, struct css_set, rcu_head);
+ kfree(cg);
+}
+
/* We don't maintain the lists running through each css_set to its
* task until after the first call to cgroup_iter_start(). This
* reduces the fork()/exit() overhead for people who have cgroups
* compiled into their kernel but not actually in use */
static int use_task_css_set_links __read_mostly;
-/* When we create or destroy a css_set, the operation simply
- * takes/releases a reference count on all the cgroups referenced
- * by subsystems in this css_set. This can end up multiple-counting
- * some cgroups, but that's OK - the ref-count is just a
- * busy/not-busy indicator; ensuring that we only count each cgroup
- * once would require taking a global lock to ensure that no
- * subsystems moved between hierarchies while we were doing so.
- *
- * Possible TODO: decide at boot time based on the number of
- * registered subsystems and the number of CPUs or NUMA nodes whether
- * it's better for performance to ref-count every subsystem, or to
- * take a global lock and only add one ref count to each hierarchy.
- */
-
-/*
- * unlink a css_set from the list and free it
- */
-static void unlink_css_set(struct css_set *cg)
+static void __put_css_set(struct css_set *cg, int taskexit)
{
struct cg_cgroup_link *link;
struct cg_cgroup_link *saved_link;
-
- hlist_del(&cg->hlist);
- css_set_count--;
-
- list_for_each_entry_safe(link, saved_link, &cg->cg_links,
- cg_link_list) {
- list_del(&link->cg_link_list);
- list_del(&link->cgrp_link_list);
- kfree(link);
- }
-}
-
-static void __put_css_set(struct css_set *cg, int taskexit)
-{
- int i;
/*
* Ensure that the refcount doesn't hit zero while any readers
* can see it. Similar to atomic_dec_and_lock(), but for an
write_unlock(&css_set_lock);
return;
}
- unlink_css_set(cg);
- write_unlock(&css_set_lock);
- rcu_read_lock();
- for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
- struct cgroup *cgrp = rcu_dereference(cg->subsys[i]->cgroup);
+ /* This css_set is dead. unlink it and release cgroup refcounts */
+ hlist_del(&cg->hlist);
+ css_set_count--;
+
+ list_for_each_entry_safe(link, saved_link, &cg->cg_links,
+ cg_link_list) {
+ struct cgroup *cgrp = link->cgrp;
+ list_del(&link->cg_link_list);
+ list_del(&link->cgrp_link_list);
if (atomic_dec_and_test(&cgrp->count) &&
notify_on_release(cgrp)) {
if (taskexit)
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
+
+ kfree(link);
}
- rcu_read_unlock();
- kfree(cg);
+
+ write_unlock(&css_set_lock);
+ call_rcu(&cg->rcu_head, free_css_set_rcu);
}
/*
__put_css_set(cg, 1);
}
+/*
+ * compare_css_sets - helper function for find_existing_css_set().
+ * @cg: candidate css_set being tested
+ * @old_cg: existing css_set for a task
+ * @new_cgrp: cgroup that's being entered by the task
+ * @template: desired set of css pointers in css_set (pre-calculated)
+ *
+ * Returns true if "cg" matches "old_cg" except for the hierarchy
+ * which "new_cgrp" belongs to, for which it should match "new_cgrp".
+ */
+static bool compare_css_sets(struct css_set *cg,
+ struct css_set *old_cg,
+ struct cgroup *new_cgrp,
+ struct cgroup_subsys_state *template[])
+{
+ struct list_head *l1, *l2;
+
+ if (memcmp(template, cg->subsys, sizeof(cg->subsys))) {
+ /* Not all subsystems matched */
+ return false;
+ }
+
+ /*
+ * Compare cgroup pointers in order to distinguish between
+ * different cgroups in heirarchies with no subsystems. We
+ * could get by with just this check alone (and skip the
+ * memcmp above) but on most setups the memcmp check will
+ * avoid the need for this more expensive check on almost all
+ * candidates.
+ */
+
+ l1 = &cg->cg_links;
+ l2 = &old_cg->cg_links;
+ while (1) {
+ struct cg_cgroup_link *cgl1, *cgl2;
+ struct cgroup *cg1, *cg2;
+
+ l1 = l1->next;
+ l2 = l2->next;
+ /* See if we reached the end - both lists are equal length. */
+ if (l1 == &cg->cg_links) {
+ BUG_ON(l2 != &old_cg->cg_links);
+ break;
+ } else {
+ BUG_ON(l2 == &old_cg->cg_links);
+ }
+ /* Locate the cgroups associated with these links. */
+ cgl1 = list_entry(l1, struct cg_cgroup_link, cg_link_list);
+ cgl2 = list_entry(l2, struct cg_cgroup_link, cg_link_list);
+ cg1 = cgl1->cgrp;
+ cg2 = cgl2->cgrp;
+ /* Hierarchies should be linked in the same order. */
+ BUG_ON(cg1->root != cg2->root);
+
+ /*
+ * If this hierarchy is the hierarchy of the cgroup
+ * that's changing, then we need to check that this
+ * css_set points to the new cgroup; if it's any other
+ * hierarchy, then this css_set should point to the
+ * same cgroup as the old css_set.
+ */
+ if (cg1->root == new_cgrp->root) {
+ if (cg1 != new_cgrp)
+ return false;
+ } else {
+ if (cg1 != cg2)
+ return false;
+ }
+ }
+ return true;
+}
+
/*
* find_existing_css_set() is a helper for
* find_css_set(), and checks to see whether an existing
hhead = css_set_hash(template);
hlist_for_each_entry(cg, node, hhead, hlist) {
- if (!memcmp(template, cg->subsys, sizeof(cg->subsys))) {
- /* All subsystems matched */
- return cg;
- }
+ if (!compare_css_sets(cg, oldcg, cgrp, template))
+ continue;
+
+ /* This css_set matches what we need */
+ return cg;
}
/* No existing cgroup group matched */
link = list_first_entry(tmp_cg_links, struct cg_cgroup_link,
cgrp_link_list);
link->cg = cg;
+ link->cgrp = cgrp;
+ atomic_inc(&cgrp->count);
list_move(&link->cgrp_link_list, &cgrp->css_sets);
- list_add(&link->cg_link_list, &cg->cg_links);
+ /*
+ * Always add links to the tail of the list so that the list
+ * is sorted by order of hierarchy creation
+ */
+ list_add_tail(&link->cg_link_list, &cg->cg_links);
}
/*
{
struct css_set *res;
struct cgroup_subsys_state *template[CGROUP_SUBSYS_COUNT];
- int i;
struct list_head tmp_cg_links;
struct hlist_head *hhead;
+ struct cg_cgroup_link *link;
/* First see if we already have a cgroup group that matches
* the desired set */
write_lock(&css_set_lock);
/* Add reference counts and links from the new css_set. */
- for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
- struct cgroup *cgrp = res->subsys[i]->cgroup;
- struct cgroup_subsys *ss = subsys[i];
- atomic_inc(&cgrp->count);
- /*
- * We want to add a link once per cgroup, so we
- * only do it for the first subsystem in each
- * hierarchy
- */
- if (ss->root->subsys_list.next == &ss->sibling)
- link_css_set(&tmp_cg_links, res, cgrp);
+ list_for_each_entry(link, &oldcg->cg_links, cg_link_list) {
+ struct cgroup *c = link->cgrp;
+ if (c->root == cgrp->root)
+ c = cgrp;
+ link_css_set(&tmp_cg_links, res, c);
}
- if (list_empty(&rootnode.subsys_list))
- link_css_set(&tmp_cg_links, res, dummytop);
BUG_ON(!list_empty(&tmp_cg_links));
return res;
}
+/*
+ * Return the cgroup for "task" from the given hierarchy. Must be
+ * called with cgroup_mutex held.
+ */
+static struct cgroup *task_cgroup_from_root(struct task_struct *task,
+ struct cgroupfs_root *root)
+{
+ struct css_set *css;
+ struct cgroup *res = NULL;
+
+ BUG_ON(!mutex_is_locked(&cgroup_mutex));
+ read_lock(&css_set_lock);
+ /*
+ * No need to lock the task - since we hold cgroup_mutex the
+ * task can't change groups, so the only thing that can happen
+ * is that it exits and its css is set back to init_css_set.
+ */
+ css = task->cgroups;
+ if (css == &init_css_set) {
+ res = &root->top_cgroup;
+ } else {
+ struct cg_cgroup_link *link;
+ list_for_each_entry(link, &css->cg_links, cg_link_list) {
+ struct cgroup *c = link->cgrp;
+ if (c->root == root) {
+ res = c;
+ break;
+ }
+ }
+ }
+ read_unlock(&css_set_lock);
+ BUG_ON(!res);
+ return res;
+}
+
/*
* There is one global cgroup mutex. We also require taking
* task_lock() when dereferencing a task's cgroup subsys pointers.
*/
deactivate_super(cgrp->root->sb);
+ /*
+ * if we're getting rid of the cgroup, refcount should ensure
+ * that there are no pidlists left.
+ */
+ BUG_ON(!list_empty(&cgrp->pidlists));
+
call_rcu(&cgrp->rcu_head, free_cgroup_rcu);
}
iput(inode);
seq_puts(seq, ",noprefix");
if (strlen(root->release_agent_path))
seq_printf(seq, ",release_agent=%s", root->release_agent_path);
+ if (strlen(root->name))
+ seq_printf(seq, ",name=%s", root->name);
mutex_unlock(&cgroup_mutex);
return 0;
}
unsigned long subsys_bits;
unsigned long flags;
char *release_agent;
+ char *name;
+ /* User explicitly requested empty subsystem */
+ bool none;
+
+ struct cgroupfs_root *new_root;
+
};
/* Convert a hierarchy specifier into a bitmask of subsystems and
mask = ~(1UL << cpuset_subsys_id);
#endif
- opts->subsys_bits = 0;
- opts->flags = 0;
- opts->release_agent = NULL;
+ memset(opts, 0, sizeof(*opts));
while ((token = strsep(&o, ",")) != NULL) {
if (!*token)
if (!ss->disabled)
opts->subsys_bits |= 1ul << i;
}
+ } else if (!strcmp(token, "none")) {
+ /* Explicitly have no subsystems */
+ opts->none = true;
} else if (!strcmp(token, "noprefix")) {
set_bit(ROOT_NOPREFIX, &opts->flags);
} else if (!strncmp(token, "release_agent=", 14)) {
/* Specifying two release agents is forbidden */
if (opts->release_agent)
return -EINVAL;
- opts->release_agent = kzalloc(PATH_MAX, GFP_KERNEL);
+ opts->release_agent =
+ kstrndup(token + 14, PATH_MAX, GFP_KERNEL);
if (!opts->release_agent)
return -ENOMEM;
- strncpy(opts->release_agent, token + 14, PATH_MAX - 1);
- opts->release_agent[PATH_MAX - 1] = 0;
+ } else if (!strncmp(token, "name=", 5)) {
+ int i;
+ const char *name = token + 5;
+ /* Can't specify an empty name */
+ if (!strlen(name))
+ return -EINVAL;
+ /* Must match [\w.-]+ */
+ for (i = 0; i < strlen(name); i++) {
+ char c = name[i];
+ if (isalnum(c))
+ continue;
+ if ((c == '.') || (c == '-') || (c == '_'))
+ continue;
+ return -EINVAL;
+ }
+ /* Specifying two names is forbidden */
+ if (opts->name)
+ return -EINVAL;
+ opts->name = kstrndup(name,
+ MAX_CGROUP_ROOT_NAMELEN,
+ GFP_KERNEL);
+ if (!opts->name)
+ return -ENOMEM;
} else {
struct cgroup_subsys *ss;
int i;
}
}
+ /* Consistency checks */
+
/*
* Option noprefix was introduced just for backward compatibility
* with the old cpuset, so we allow noprefix only if mounting just
(opts->subsys_bits & mask))
return -EINVAL;
- /* We can't have an empty hierarchy */
- if (!opts->subsys_bits)
+
+ /* Can't specify "none" and some subsystems */
+ if (opts->subsys_bits && opts->none)
+ return -EINVAL;
+
+ /*
+ * We either have to specify by name or by subsystems. (So all
+ * empty hierarchies must have a name).
+ */
+ if (!opts->subsys_bits && !opts->name)
return -EINVAL;
return 0;
goto out_unlock;
}
+ /* Don't allow name to change at remount */
+ if (opts.name && strcmp(opts.name, root->name)) {
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
ret = rebind_subsystems(root, opts.subsys_bits);
if (ret)
goto out_unlock;
strcpy(root->release_agent_path, opts.release_agent);
out_unlock:
kfree(opts.release_agent);
+ kfree(opts.name);
mutex_unlock(&cgroup_mutex);
mutex_unlock(&cgrp->dentry->d_inode->i_mutex);
unlock_kernel();
INIT_LIST_HEAD(&cgrp->children);
INIT_LIST_HEAD(&cgrp->css_sets);
INIT_LIST_HEAD(&cgrp->release_list);
- INIT_LIST_HEAD(&cgrp->pids_list);
- init_rwsem(&cgrp->pids_mutex);
+ INIT_LIST_HEAD(&cgrp->pidlists);
+ mutex_init(&cgrp->pidlist_mutex);
}
+
static void init_cgroup_root(struct cgroupfs_root *root)
{
struct cgroup *cgrp = &root->top_cgroup;
init_cgroup_housekeeping(cgrp);
}
+static bool init_root_id(struct cgroupfs_root *root)
+{
+ int ret = 0;
+
+ do {
+ if (!ida_pre_get(&hierarchy_ida, GFP_KERNEL))
+ return false;
+ spin_lock(&hierarchy_id_lock);
+ /* Try to allocate the next unused ID */
+ ret = ida_get_new_above(&hierarchy_ida, next_hierarchy_id,
+ &root->hierarchy_id);
+ if (ret == -ENOSPC)
+ /* Try again starting from 0 */
+ ret = ida_get_new(&hierarchy_ida, &root->hierarchy_id);
+ if (!ret) {
+ next_hierarchy_id = root->hierarchy_id + 1;
+ } else if (ret != -EAGAIN) {
+ /* Can only get here if the 31-bit IDR is full ... */
+ BUG_ON(ret);
+ }
+ spin_unlock(&hierarchy_id_lock);
+ } while (ret);
+ return true;
+}
+
static int cgroup_test_super(struct super_block *sb, void *data)
{
- struct cgroupfs_root *new = data;
+ struct cgroup_sb_opts *opts = data;
struct cgroupfs_root *root = sb->s_fs_info;
- /* First check subsystems */
- if (new->subsys_bits != root->subsys_bits)
- return 0;
+ /* If we asked for a name then it must match */
+ if (opts->name && strcmp(opts->name, root->name))
+ return 0;
- /* Next check flags */
- if (new->flags != root->flags)
+ /*
+ * If we asked for subsystems (or explicitly for no
+ * subsystems) then they must match
+ */
+ if ((opts->subsys_bits || opts->none)
+ && (opts->subsys_bits != root->subsys_bits))
return 0;
return 1;
}
+static struct cgroupfs_root *cgroup_root_from_opts(struct cgroup_sb_opts *opts)
+{
+ struct cgroupfs_root *root;
+
+ if (!opts->subsys_bits && !opts->none)
+ return NULL;
+
+ root = kzalloc(sizeof(*root), GFP_KERNEL);
+ if (!root)
+ return ERR_PTR(-ENOMEM);
+
+ if (!init_root_id(root)) {
+ kfree(root);
+ return ERR_PTR(-ENOMEM);
+ }
+ init_cgroup_root(root);
+
+ root->subsys_bits = opts->subsys_bits;
+ root->flags = opts->flags;
+ if (opts->release_agent)
+ strcpy(root->release_agent_path, opts->release_agent);
+ if (opts->name)
+ strcpy(root->name, opts->name);
+ return root;
+}
+
+static void cgroup_drop_root(struct cgroupfs_root *root)
+{
+ if (!root)
+ return;
+
+ BUG_ON(!root->hierarchy_id);
+ spin_lock(&hierarchy_id_lock);
+ ida_remove(&hierarchy_ida, root->hierarchy_id);
+ spin_unlock(&hierarchy_id_lock);
+ kfree(root);
+}
+
static int cgroup_set_super(struct super_block *sb, void *data)
{
int ret;
- struct cgroupfs_root *root = data;
+ struct cgroup_sb_opts *opts = data;
+
+ /* If we don't have a new root, we can't set up a new sb */
+ if (!opts->new_root)
+ return -EINVAL;
+
+ BUG_ON(!opts->subsys_bits && !opts->none);
ret = set_anon_super(sb, NULL);
if (ret)
return ret;
- sb->s_fs_info = root;
- root->sb = sb;
+ sb->s_fs_info = opts->new_root;
+ opts->new_root->sb = sb;
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
void *data, struct vfsmount *mnt)
{
struct cgroup_sb_opts opts;
+ struct cgroupfs_root *root;
int ret = 0;
struct super_block *sb;
- struct cgroupfs_root *root;
- struct list_head tmp_cg_links;
+ struct cgroupfs_root *new_root;
/* First find the desired set of subsystems */
ret = parse_cgroupfs_options(data, &opts);
- if (ret) {
- kfree(opts.release_agent);
- return ret;
- }
-
- root = kzalloc(sizeof(*root), GFP_KERNEL);
- if (!root) {
- kfree(opts.release_agent);
- return -ENOMEM;
- }
+ if (ret)
+ goto out_err;
- init_cgroup_root(root);
- root->subsys_bits = opts.subsys_bits;
- root->flags = opts.flags;
- if (opts.release_agent) {
- strcpy(root->release_agent_path, opts.release_agent);
- kfree(opts.release_agent);
+ /*
+ * Allocate a new cgroup root. We may not need it if we're
+ * reusing an existing hierarchy.
+ */
+ new_root = cgroup_root_from_opts(&opts);
+ if (IS_ERR(new_root)) {
+ ret = PTR_ERR(new_root);
+ goto out_err;
}
+ opts.new_root = new_root;
- sb = sget(fs_type, cgroup_test_super, cgroup_set_super, root);
-
+ /* Locate an existing or new sb for this hierarchy */
+ sb = sget(fs_type, cgroup_test_super, cgroup_set_super, &opts);
if (IS_ERR(sb)) {
- kfree(root);
- return PTR_ERR(sb);
+ ret = PTR_ERR(sb);
+ cgroup_drop_root(opts.new_root);
+ goto out_err;
}
- if (sb->s_fs_info != root) {
- /* Reusing an existing superblock */
- BUG_ON(sb->s_root == NULL);
- kfree(root);
- root = NULL;
- } else {
- /* New superblock */
+ root = sb->s_fs_info;
+ BUG_ON(!root);
+ if (root == opts.new_root) {
+ /* We used the new root structure, so this is a new hierarchy */
+ struct list_head tmp_cg_links;
struct cgroup *root_cgrp = &root->top_cgroup;
struct inode *inode;
+ struct cgroupfs_root *existing_root;
int i;
BUG_ON(sb->s_root != NULL);
mutex_lock(&inode->i_mutex);
mutex_lock(&cgroup_mutex);
+ if (strlen(root->name)) {
+ /* Check for name clashes with existing mounts */
+ for_each_active_root(existing_root) {
+ if (!strcmp(existing_root->name, root->name)) {
+ ret = -EBUSY;
+ mutex_unlock(&cgroup_mutex);
+ mutex_unlock(&inode->i_mutex);
+ goto drop_new_super;
+ }
+ }
+ }
+
/*
* We're accessing css_set_count without locking
* css_set_lock here, but that's OK - it can only be
if (ret == -EBUSY) {
mutex_unlock(&cgroup_mutex);
mutex_unlock(&inode->i_mutex);
- goto free_cg_links;
+ free_cg_links(&tmp_cg_links);
+ goto drop_new_super;
}
/* EBUSY should be the only error here */
BUG_ON(root->number_of_cgroups != 1);
cgroup_populate_dir(root_cgrp);
- mutex_unlock(&inode->i_mutex);
mutex_unlock(&cgroup_mutex);
+ mutex_unlock(&inode->i_mutex);
+ } else {
+ /*
+ * We re-used an existing hierarchy - the new root (if
+ * any) is not needed
+ */
+ cgroup_drop_root(opts.new_root);
}
simple_set_mnt(mnt, sb);
+ kfree(opts.release_agent);
+ kfree(opts.name);
return 0;
- free_cg_links:
- free_cg_links(&tmp_cg_links);
drop_new_super:
deactivate_locked_super(sb);
+ out_err:
+ kfree(opts.release_agent);
+ kfree(opts.name);
+
return ret;
}
mutex_unlock(&cgroup_mutex);
kill_litter_super(sb);
- kfree(root);
+ cgroup_drop_root(root);
}
static struct file_system_type cgroup_fs_type = {
return 0;
}
-/*
- * Return the first subsystem attached to a cgroup's hierarchy, and
- * its subsystem id.
- */
-
-static void get_first_subsys(const struct cgroup *cgrp,
- struct cgroup_subsys_state **css, int *subsys_id)
-{
- const struct cgroupfs_root *root = cgrp->root;
- const struct cgroup_subsys *test_ss;
- BUG_ON(list_empty(&root->subsys_list));
- test_ss = list_entry(root->subsys_list.next,
- struct cgroup_subsys, sibling);
- if (css) {
- *css = cgrp->subsys[test_ss->subsys_id];
- BUG_ON(!*css);
- }
- if (subsys_id)
- *subsys_id = test_ss->subsys_id;
-}
-
/**
* cgroup_attach_task - attach task 'tsk' to cgroup 'cgrp'
* @cgrp: the cgroup the task is attaching to
struct css_set *cg;
struct css_set *newcg;
struct cgroupfs_root *root = cgrp->root;
- int subsys_id;
-
- get_first_subsys(cgrp, NULL, &subsys_id);
/* Nothing to do if the task is already in that cgroup */
- oldcgrp = task_cgroup(tsk, subsys_id);
+ oldcgrp = task_cgroup_from_root(tsk, root);
if (cgrp == oldcgrp)
return 0;
for_each_subsys(root, ss) {
if (ss->can_attach) {
- retval = ss->can_attach(ss, cgrp, tsk);
+ retval = ss->can_attach(ss, cgrp, tsk, false);
if (retval)
return retval;
}
for_each_subsys(root, ss) {
if (ss->attach)
- ss->attach(ss, cgrp, oldcgrp, tsk);
+ ss->attach(ss, cgrp, oldcgrp, tsk, false);
}
set_bit(CGRP_RELEASABLE, &oldcgrp->flags);
synchronize_rcu();
return ret;
}
-/* The various types of files and directories in a cgroup file system */
-enum cgroup_filetype {
- FILE_ROOT,
- FILE_DIR,
- FILE_TASKLIST,
- FILE_NOTIFY_ON_RELEASE,
- FILE_RELEASE_AGENT,
-};
-
/**
* cgroup_lock_live_group - take cgroup_mutex and check that cgrp is alive.
* @cgrp: the cgroup to be checked for liveness
* the start of a css_set
*/
static void cgroup_advance_iter(struct cgroup *cgrp,
- struct cgroup_iter *it)
+ struct cgroup_iter *it)
{
struct list_head *l = it->cg_link;
struct cg_cgroup_link *link;
}
/*
- * Stuff for reading the 'tasks' file.
+ * Stuff for reading the 'tasks'/'procs' files.
*
* Reading this file can return large amounts of data if a cgroup has
* *lots* of attached tasks. So it may need several calls to read(),
*/
/*
- * Load into 'pidarray' up to 'npids' of the tasks using cgroup
- * 'cgrp'. Return actual number of pids loaded. No need to
- * task_lock(p) when reading out p->cgroup, since we're in an RCU
- * read section, so the css_set can't go away, and is
- * immutable after creation.
+ * The following two functions "fix" the issue where there are more pids
+ * than kmalloc will give memory for; in such cases, we use vmalloc/vfree.
+ * TODO: replace with a kernel-wide solution to this problem
+ */
+#define PIDLIST_TOO_LARGE(c) ((c) * sizeof(pid_t) > (PAGE_SIZE * 2))
+static void *pidlist_allocate(int count)
+{
+ if (PIDLIST_TOO_LARGE(count))
+ return vmalloc(count * sizeof(pid_t));
+ else
+ return kmalloc(count * sizeof(pid_t), GFP_KERNEL);
+}
+static void pidlist_free(void *p)
+{
+ if (is_vmalloc_addr(p))
+ vfree(p);
+ else
+ kfree(p);
+}
+static void *pidlist_resize(void *p, int newcount)
+{
+ void *newlist;
+ /* note: if new alloc fails, old p will still be valid either way */
+ if (is_vmalloc_addr(p)) {
+ newlist = vmalloc(newcount * sizeof(pid_t));
+ if (!newlist)
+ return NULL;
+ memcpy(newlist, p, newcount * sizeof(pid_t));
+ vfree(p);
+ } else {
+ newlist = krealloc(p, newcount * sizeof(pid_t), GFP_KERNEL);
+ }
+ return newlist;
+}
+
+/*
+ * pidlist_uniq - given a kmalloc()ed list, strip out all duplicate entries
+ * If the new stripped list is sufficiently smaller and there's enough memory
+ * to allocate a new buffer, will let go of the unneeded memory. Returns the
+ * number of unique elements.
+ */
+/* is the size difference enough that we should re-allocate the array? */
+#define PIDLIST_REALLOC_DIFFERENCE(old, new) ((old) - PAGE_SIZE >= (new))
+static int pidlist_uniq(pid_t **p, int length)
+{
+ int src, dest = 1;
+ pid_t *list = *p;
+ pid_t *newlist;
+
+ /*
+ * we presume the 0th element is unique, so i starts at 1. trivial
+ * edge cases first; no work needs to be done for either
+ */
+ if (length == 0 || length == 1)
+ return length;
+ /* src and dest walk down the list; dest counts unique elements */
+ for (src = 1; src < length; src++) {
+ /* find next unique element */
+ while (list[src] == list[src-1]) {
+ src++;
+ if (src == length)
+ goto after;
+ }
+ /* dest always points to where the next unique element goes */
+ list[dest] = list[src];
+ dest++;
+ }
+after:
+ /*
+ * if the length difference is large enough, we want to allocate a
+ * smaller buffer to save memory. if this fails due to out of memory,
+ * we'll just stay with what we've got.
+ */
+ if (PIDLIST_REALLOC_DIFFERENCE(length, dest)) {
+ newlist = pidlist_resize(list, dest);
+ if (newlist)
+ *p = newlist;
+ }
+ return dest;
+}
+
+static int cmppid(const void *a, const void *b)
+{
+ return *(pid_t *)a - *(pid_t *)b;
+}
+
+/*
+ * find the appropriate pidlist for our purpose (given procs vs tasks)
+ * returns with the lock on that pidlist already held, and takes care
+ * of the use count, or returns NULL with no locks held if we're out of
+ * memory.
*/
-static int pid_array_load(pid_t *pidarray, int npids, struct cgroup *cgrp)
+static struct cgroup_pidlist *cgroup_pidlist_find(struct cgroup *cgrp,
+ enum cgroup_filetype type)
{
- int n = 0, pid;
+ struct cgroup_pidlist *l;
+ /* don't need task_nsproxy() if we're looking at ourself */
+ struct pid_namespace *ns = get_pid_ns(current->nsproxy->pid_ns);
+ /*
+ * We can't drop the pidlist_mutex before taking the l->mutex in case
+ * the last ref-holder is trying to remove l from the list at the same
+ * time. Holding the pidlist_mutex precludes somebody taking whichever
+ * list we find out from under us - compare release_pid_array().
+ */
+ mutex_lock(&cgrp->pidlist_mutex);
+ list_for_each_entry(l, &cgrp->pidlists, links) {
+ if (l->key.type == type && l->key.ns == ns) {
+ /* found a matching list - drop the extra refcount */
+ put_pid_ns(ns);
+ /* make sure l doesn't vanish out from under us */
+ down_write(&l->mutex);
+ mutex_unlock(&cgrp->pidlist_mutex);
+ l->use_count++;
+ return l;
+ }
+ }
+ /* entry not found; create a new one */
+ l = kmalloc(sizeof(struct cgroup_pidlist), GFP_KERNEL);
+ if (!l) {
+ mutex_unlock(&cgrp->pidlist_mutex);
+ put_pid_ns(ns);
+ return l;
+ }
+ init_rwsem(&l->mutex);
+ down_write(&l->mutex);
+ l->key.type = type;
+ l->key.ns = ns;
+ l->use_count = 0; /* don't increment here */
+ l->list = NULL;
+ l->owner = cgrp;
+ list_add(&l->links, &cgrp->pidlists);
+ mutex_unlock(&cgrp->pidlist_mutex);
+ return l;
+}
+
+/*
+ * Load a cgroup's pidarray with either procs' tgids or tasks' pids
+ */
+static int pidlist_array_load(struct cgroup *cgrp, enum cgroup_filetype type,
+ struct cgroup_pidlist **lp)
+{
+ pid_t *array;
+ int length;
+ int pid, n = 0; /* used for populating the array */
struct cgroup_iter it;
struct task_struct *tsk;
+ struct cgroup_pidlist *l;
+
+ /*
+ * If cgroup gets more users after we read count, we won't have
+ * enough space - tough. This race is indistinguishable to the
+ * caller from the case that the additional cgroup users didn't
+ * show up until sometime later on.
+ */
+ length = cgroup_task_count(cgrp);
+ array = pidlist_allocate(length);
+ if (!array)
+ return -ENOMEM;
+ /* now, populate the array */
cgroup_iter_start(cgrp, &it);
while ((tsk = cgroup_iter_next(cgrp, &it))) {
- if (unlikely(n == npids))
+ if (unlikely(n == length))
break;
- pid = task_pid_vnr(tsk);
- if (pid > 0)
- pidarray[n++] = pid;
+ /* get tgid or pid for procs or tasks file respectively */
+ if (type == CGROUP_FILE_PROCS)
+ pid = task_tgid_vnr(tsk);
+ else
+ pid = task_pid_vnr(tsk);
+ if (pid > 0) /* make sure to only use valid results */
+ array[n++] = pid;
}
cgroup_iter_end(cgrp, &it);
- return n;
+ length = n;
+ /* now sort & (if procs) strip out duplicates */
+ sort(array, length, sizeof(pid_t), cmppid, NULL);
+ if (type == CGROUP_FILE_PROCS)
+ length = pidlist_uniq(&array, length);
+ l = cgroup_pidlist_find(cgrp, type);
+ if (!l) {
+ pidlist_free(array);
+ return -ENOMEM;
+ }
+ /* store array, freeing old if necessary - lock already held */
+ pidlist_free(l->list);
+ l->list = array;
+ l->length = length;
+ l->use_count++;
+ up_write(&l->mutex);
+ *lp = l;
+ return 0;
}
/**
return ret;
}
-/*
- * Cache pids for all threads in the same pid namespace that are
- * opening the same "tasks" file.
- */
-struct cgroup_pids {
- /* The node in cgrp->pids_list */
- struct list_head list;
- /* The cgroup those pids belong to */
- struct cgroup *cgrp;
- /* The namepsace those pids belong to */
- struct pid_namespace *ns;
- /* Array of process ids in the cgroup */
- pid_t *tasks_pids;
- /* How many files are using the this tasks_pids array */
- int use_count;
- /* Length of the current tasks_pids array */
- int length;
-};
-
-static int cmppid(const void *a, const void *b)
-{
- return *(pid_t *)a - *(pid_t *)b;
-}
/*
- * seq_file methods for the "tasks" file. The seq_file position is the
+ * seq_file methods for the tasks/procs files. The seq_file position is the
* next pid to display; the seq_file iterator is a pointer to the pid
- * in the cgroup->tasks_pids array.
+ * in the cgroup->l->list array.
*/
-static void *cgroup_tasks_start(struct seq_file *s, loff_t *pos)
+static void *cgroup_pidlist_start(struct seq_file *s, loff_t *pos)
{
/*
* Initially we receive a position value that corresponds to
* after a seek to the start). Use a binary-search to find the
* next pid to display, if any
*/
- struct cgroup_pids *cp = s->private;
- struct cgroup *cgrp = cp->cgrp;
+ struct cgroup_pidlist *l = s->private;
int index = 0, pid = *pos;
int *iter;
- down_read(&cgrp->pids_mutex);
+ down_read(&l->mutex);
if (pid) {
- int end = cp->length;
+ int end = l->length;
while (index < end) {
int mid = (index + end) / 2;
- if (cp->tasks_pids[mid] == pid) {
+ if (l->list[mid] == pid) {
index = mid;
break;
- } else if (cp->tasks_pids[mid] <= pid)
+ } else if (l->list[mid] <= pid)
index = mid + 1;
else
end = mid;
}
}
/* If we're off the end of the array, we're done */
- if (index >= cp->length)
+ if (index >= l->length)
return NULL;
/* Update the abstract position to be the actual pid that we found */
- iter = cp->tasks_pids + index;
+ iter = l->list + index;
*pos = *iter;
return iter;
}
-static void cgroup_tasks_stop(struct seq_file *s, void *v)
+static void cgroup_pidlist_stop(struct seq_file *s, void *v)
{
- struct cgroup_pids *cp = s->private;
- struct cgroup *cgrp = cp->cgrp;
- up_read(&cgrp->pids_mutex);
+ struct cgroup_pidlist *l = s->private;
+ up_read(&l->mutex);
}
-static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
+static void *cgroup_pidlist_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct cgroup_pids *cp = s->private;
- int *p = v;
- int *end = cp->tasks_pids + cp->length;
-
+ struct cgroup_pidlist *l = s->private;
+ pid_t *p = v;
+ pid_t *end = l->list + l->length;
/*
* Advance to the next pid in the array. If this goes off the
* end, we're done
}
}
-static int cgroup_tasks_show(struct seq_file *s, void *v)
+static int cgroup_pidlist_show(struct seq_file *s, void *v)
{
return seq_printf(s, "%d\n", *(int *)v);
}
-static const struct seq_operations cgroup_tasks_seq_operations = {
- .start = cgroup_tasks_start,
- .stop = cgroup_tasks_stop,
- .next = cgroup_tasks_next,
- .show = cgroup_tasks_show,
+/*
+ * seq_operations functions for iterating on pidlists through seq_file -
+ * independent of whether it's tasks or procs
+ */
+static const struct seq_operations cgroup_pidlist_seq_operations = {
+ .start = cgroup_pidlist_start,
+ .stop = cgroup_pidlist_stop,
+ .next = cgroup_pidlist_next,
+ .show = cgroup_pidlist_show,
};
-static void release_cgroup_pid_array(struct cgroup_pids *cp)
+static void cgroup_release_pid_array(struct cgroup_pidlist *l)
{
- struct cgroup *cgrp = cp->cgrp;
-
- down_write(&cgrp->pids_mutex);
- BUG_ON(!cp->use_count);
- if (!--cp->use_count) {
- list_del(&cp->list);
- put_pid_ns(cp->ns);
- kfree(cp->tasks_pids);
- kfree(cp);
+ /*
+ * the case where we're the last user of this particular pidlist will
+ * have us remove it from the cgroup's list, which entails taking the
+ * mutex. since in pidlist_find the pidlist->lock depends on cgroup->
+ * pidlist_mutex, we have to take pidlist_mutex first.
+ */
+ mutex_lock(&l->owner->pidlist_mutex);
+ down_write(&l->mutex);
+ BUG_ON(!l->use_count);
+ if (!--l->use_count) {
+ /* we're the last user if refcount is 0; remove and free */
+ list_del(&l->links);
+ mutex_unlock(&l->owner->pidlist_mutex);
+ pidlist_free(l->list);
+ put_pid_ns(l->key.ns);
+ up_write(&l->mutex);
+ kfree(l);
+ return;
}
- up_write(&cgrp->pids_mutex);
+ mutex_unlock(&l->owner->pidlist_mutex);
+ up_write(&l->mutex);
}
-static int cgroup_tasks_release(struct inode *inode, struct file *file)
+static int cgroup_pidlist_release(struct inode *inode, struct file *file)
{
- struct seq_file *seq;
- struct cgroup_pids *cp;
-
+ struct cgroup_pidlist *l;
if (!(file->f_mode & FMODE_READ))
return 0;
-
- seq = file->private_data;
- cp = seq->private;
-
- release_cgroup_pid_array(cp);
+ /*
+ * the seq_file will only be initialized if the file was opened for
+ * reading; hence we check if it's not null only in that case.
+ */
+ l = ((struct seq_file *)file->private_data)->private;
+ cgroup_release_pid_array(l);
return seq_release(inode, file);
}
-static struct file_operations cgroup_tasks_operations = {
+static const struct file_operations cgroup_pidlist_operations = {
.read = seq_read,
.llseek = seq_lseek,
.write = cgroup_file_write,
- .release = cgroup_tasks_release,
+ .release = cgroup_pidlist_release,
};
/*
- * Handle an open on 'tasks' file. Prepare an array containing the
- * process id's of tasks currently attached to the cgroup being opened.
+ * The following functions handle opens on a file that displays a pidlist
+ * (tasks or procs). Prepare an array of the process/thread IDs of whoever's
+ * in the cgroup.
*/
-
-static int cgroup_tasks_open(struct inode *unused, struct file *file)
+/* helper function for the two below it */
+static int cgroup_pidlist_open(struct file *file, enum cgroup_filetype type)
{
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
- struct pid_namespace *ns = current->nsproxy->pid_ns;
- struct cgroup_pids *cp;
- pid_t *pidarray;
- int npids;
+ struct cgroup_pidlist *l;
int retval;
/* Nothing to do for write-only files */
if (!(file->f_mode & FMODE_READ))
return 0;
- /*
- * If cgroup gets more users after we read count, we won't have
- * enough space - tough. This race is indistinguishable to the
- * caller from the case that the additional cgroup users didn't
- * show up until sometime later on.
- */
- npids = cgroup_task_count(cgrp);
- pidarray = kmalloc(npids * sizeof(pid_t), GFP_KERNEL);
- if (!pidarray)
- return -ENOMEM;
- npids = pid_array_load(pidarray, npids, cgrp);
- sort(pidarray, npids, sizeof(pid_t), cmppid, NULL);
-
- /*
- * Store the array in the cgroup, freeing the old
- * array if necessary
- */
- down_write(&cgrp->pids_mutex);
-
- list_for_each_entry(cp, &cgrp->pids_list, list) {
- if (ns == cp->ns)
- goto found;
- }
-
- cp = kzalloc(sizeof(*cp), GFP_KERNEL);
- if (!cp) {
- up_write(&cgrp->pids_mutex);
- kfree(pidarray);
- return -ENOMEM;
- }
- cp->cgrp = cgrp;
- cp->ns = ns;
- get_pid_ns(ns);
- list_add(&cp->list, &cgrp->pids_list);
-found:
- kfree(cp->tasks_pids);
- cp->tasks_pids = pidarray;
- cp->length = npids;
- cp->use_count++;
- up_write(&cgrp->pids_mutex);
-
- file->f_op = &cgroup_tasks_operations;
+ /* have the array populated */
+ retval = pidlist_array_load(cgrp, type, &l);
+ if (retval)
+ return retval;
+ /* configure file information */
+ file->f_op = &cgroup_pidlist_operations;
- retval = seq_open(file, &cgroup_tasks_seq_operations);
+ retval = seq_open(file, &cgroup_pidlist_seq_operations);
if (retval) {
- release_cgroup_pid_array(cp);
+ cgroup_release_pid_array(l);
return retval;
}
- ((struct seq_file *)file->private_data)->private = cp;
+ ((struct seq_file *)file->private_data)->private = l;
return 0;
}
+static int cgroup_tasks_open(struct inode *unused, struct file *file)
+{
+ return cgroup_pidlist_open(file, CGROUP_FILE_TASKS);
+}
+static int cgroup_procs_open(struct inode *unused, struct file *file)
+{
+ return cgroup_pidlist_open(file, CGROUP_FILE_PROCS);
+}
static u64 cgroup_read_notify_on_release(struct cgroup *cgrp,
struct cftype *cft)
/*
* for the common functions, 'private' gives the type of file
*/
+/* for hysterical raisins, we can't put this on the older files */
+#define CGROUP_FILE_GENERIC_PREFIX "cgroup."
static struct cftype files[] = {
{
.name = "tasks",
.open = cgroup_tasks_open,
.write_u64 = cgroup_tasks_write,
- .release = cgroup_tasks_release,
- .private = FILE_TASKLIST,
+ .release = cgroup_pidlist_release,
.mode = S_IRUGO | S_IWUSR,
},
-
+ {
+ .name = CGROUP_FILE_GENERIC_PREFIX "procs",
+ .open = cgroup_procs_open,
+ /* .write_u64 = cgroup_procs_write, TODO */
+ .release = cgroup_pidlist_release,
+ .mode = S_IRUGO,
+ },
{
.name = "notify_on_release",
.read_u64 = cgroup_read_notify_on_release,
.write_u64 = cgroup_write_notify_on_release,
- .private = FILE_NOTIFY_ON_RELEASE,
},
};
.read_seq_string = cgroup_release_agent_show,
.write_string = cgroup_release_agent_write,
.max_write_len = PATH_MAX,
- .private = FILE_RELEASE_AGENT,
};
static int cgroup_populate_dir(struct cgroup *cgrp)
init_task.cgroups = &init_css_set;
init_css_set_link.cg = &init_css_set;
+ init_css_set_link.cgrp = dummytop;
list_add(&init_css_set_link.cgrp_link_list,
&rootnode.top_cgroup.css_sets);
list_add(&init_css_set_link.cg_link_list,
/* Add init_css_set to the hash table */
hhead = css_set_hash(init_css_set.subsys);
hlist_add_head(&init_css_set.hlist, hhead);
-
+ BUG_ON(!init_root_id(&rootnode));
err = register_filesystem(&cgroup_fs_type);
if (err < 0)
goto out;
for_each_active_root(root) {
struct cgroup_subsys *ss;
struct cgroup *cgrp;
- int subsys_id;
int count = 0;
- seq_printf(m, "%lu:", root->subsys_bits);
+ seq_printf(m, "%d:", root->hierarchy_id);
for_each_subsys(root, ss)
seq_printf(m, "%s%s", count++ ? "," : "", ss->name);
+ if (strlen(root->name))
+ seq_printf(m, "%sname=%s", count ? "," : "",
+ root->name);
seq_putc(m, ':');
- get_first_subsys(&root->top_cgroup, NULL, &subsys_id);
- cgrp = task_cgroup(tsk, subsys_id);
+ cgrp = task_cgroup_from_root(tsk, root);
retval = cgroup_path(cgrp, buf, PAGE_SIZE);
if (retval < 0)
goto out_unlock;
mutex_lock(&cgroup_mutex);
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
- seq_printf(m, "%s\t%lu\t%d\t%d\n",
- ss->name, ss->root->subsys_bits,
+ seq_printf(m, "%s\t%d\t%d\t%d\n",
+ ss->name, ss->root->hierarchy_id,
ss->root->number_of_cgroups, !ss->disabled);
}
mutex_unlock(&cgroup_mutex);
{
int ret;
struct cgroup *target;
- int subsys_id;
if (cgrp == dummytop)
return 1;
- get_first_subsys(cgrp, NULL, &subsys_id);
- target = task_cgroup(task, subsys_id);
+ target = task_cgroup_from_root(task, cgrp->root);
while (cgrp != target && cgrp!= cgrp->top_cgroup)
cgrp = cgrp->parent;
ret = (cgrp == target);
return ret;
}
+#ifdef CONFIG_CGROUP_DEBUG
+static struct cgroup_subsys_state *debug_create(struct cgroup_subsys *ss,
+ struct cgroup *cont)
+{
+ struct cgroup_subsys_state *css = kzalloc(sizeof(*css), GFP_KERNEL);
+
+ if (!css)
+ return ERR_PTR(-ENOMEM);
+
+ return css;
+}
+
+static void debug_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
+{
+ kfree(cont->subsys[debug_subsys_id]);
+}
+
+static u64 cgroup_refcount_read(struct cgroup *cont, struct cftype *cft)
+{
+ return atomic_read(&cont->count);
+}
+
+static u64 debug_taskcount_read(struct cgroup *cont, struct cftype *cft)
+{
+ return cgroup_task_count(cont);
+}
+
+static u64 current_css_set_read(struct cgroup *cont, struct cftype *cft)
+{
+ return (u64)(unsigned long)current->cgroups;
+}
+
+static u64 current_css_set_refcount_read(struct cgroup *cont,
+ struct cftype *cft)
+{
+ u64 count;
+
+ rcu_read_lock();
+ count = atomic_read(¤t->cgroups->refcount);
+ rcu_read_unlock();
+ return count;
+}
+
+static int current_css_set_cg_links_read(struct cgroup *cont,
+ struct cftype *cft,
+ struct seq_file *seq)
+{
+ struct cg_cgroup_link *link;
+ struct css_set *cg;
+
+ read_lock(&css_set_lock);
+ rcu_read_lock();
+ cg = rcu_dereference(current->cgroups);
+ list_for_each_entry(link, &cg->cg_links, cg_link_list) {
+ struct cgroup *c = link->cgrp;
+ const char *name;
+
+ if (c->dentry)
+ name = c->dentry->d_name.name;
+ else
+ name = "?";
+ seq_printf(seq, "Root %d group %s\n",
+ c->root->hierarchy_id, name);
+ }
+ rcu_read_unlock();
+ read_unlock(&css_set_lock);
+ return 0;
+}
+
+#define MAX_TASKS_SHOWN_PER_CSS 25
+static int cgroup_css_links_read(struct cgroup *cont,
+ struct cftype *cft,
+ struct seq_file *seq)
+{
+ struct cg_cgroup_link *link;
+
+ read_lock(&css_set_lock);
+ list_for_each_entry(link, &cont->css_sets, cgrp_link_list) {
+ struct css_set *cg = link->cg;
+ struct task_struct *task;
+ int count = 0;
+ seq_printf(seq, "css_set %p\n", cg);
+ list_for_each_entry(task, &cg->tasks, cg_list) {
+ if (count++ > MAX_TASKS_SHOWN_PER_CSS) {
+ seq_puts(seq, " ...\n");
+ break;
+ } else {
+ seq_printf(seq, " task %d\n",
+ task_pid_vnr(task));
+ }
+ }
+ }
+ read_unlock(&css_set_lock);
+ return 0;
+}
+
+static u64 releasable_read(struct cgroup *cgrp, struct cftype *cft)
+{
+ return test_bit(CGRP_RELEASABLE, &cgrp->flags);
+}
+
+static struct cftype debug_files[] = {
+ {
+ .name = "cgroup_refcount",
+ .read_u64 = cgroup_refcount_read,
+ },
+ {
+ .name = "taskcount",
+ .read_u64 = debug_taskcount_read,
+ },
+
+ {
+ .name = "current_css_set",
+ .read_u64 = current_css_set_read,
+ },
+
+ {
+ .name = "current_css_set_refcount",
+ .read_u64 = current_css_set_refcount_read,
+ },
+
+ {
+ .name = "current_css_set_cg_links",
+ .read_seq_string = current_css_set_cg_links_read,
+ },
+
+ {
+ .name = "cgroup_css_links",
+ .read_seq_string = cgroup_css_links_read,
+ },
+
+ {
+ .name = "releasable",
+ .read_u64 = releasable_read,
+ },
+};
+
+static int debug_populate(struct cgroup_subsys *ss, struct cgroup *cont)
+{
+ return cgroup_add_files(cont, ss, debug_files,
+ ARRAY_SIZE(debug_files));
+}
+
+struct cgroup_subsys debug_subsys = {
+ .name = "debug",
+ .create = debug_create,
+ .destroy = debug_destroy,
+ .populate = debug_populate,
+ .subsys_id = debug_subsys_id,
+};
+#endif /* CONFIG_CGROUP_DEBUG */
+++ /dev/null
-/*
- * kernel/cgroup_debug.c - Example cgroup subsystem that
- * exposes debug info
- *
- * Copyright (C) Google Inc, 2007
- *
- * Developed by Paul Menage (menage@google.com)
- *
- */
-
-#include <linux/cgroup.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/rcupdate.h>
-
-#include <asm/atomic.h>
-
-static struct cgroup_subsys_state *debug_create(struct cgroup_subsys *ss,
- struct cgroup *cont)
-{
- struct cgroup_subsys_state *css = kzalloc(sizeof(*css), GFP_KERNEL);
-
- if (!css)
- return ERR_PTR(-ENOMEM);
-
- return css;
-}
-
-static void debug_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
-{
- kfree(cont->subsys[debug_subsys_id]);
-}
-
-static u64 cgroup_refcount_read(struct cgroup *cont, struct cftype *cft)
-{
- return atomic_read(&cont->count);
-}
-
-static u64 taskcount_read(struct cgroup *cont, struct cftype *cft)
-{
- u64 count;
-
- count = cgroup_task_count(cont);
- return count;
-}
-
-static u64 current_css_set_read(struct cgroup *cont, struct cftype *cft)
-{
- return (u64)(long)current->cgroups;
-}
-
-static u64 current_css_set_refcount_read(struct cgroup *cont,
- struct cftype *cft)
-{
- u64 count;
-
- rcu_read_lock();
- count = atomic_read(¤t->cgroups->refcount);
- rcu_read_unlock();
- return count;
-}
-
-static u64 releasable_read(struct cgroup *cgrp, struct cftype *cft)
-{
- return test_bit(CGRP_RELEASABLE, &cgrp->flags);
-}
-
-static struct cftype files[] = {
- {
- .name = "cgroup_refcount",
- .read_u64 = cgroup_refcount_read,
- },
- {
- .name = "taskcount",
- .read_u64 = taskcount_read,
- },
-
- {
- .name = "current_css_set",
- .read_u64 = current_css_set_read,
- },
-
- {
- .name = "current_css_set_refcount",
- .read_u64 = current_css_set_refcount_read,
- },
-
- {
- .name = "releasable",
- .read_u64 = releasable_read,
- },
-};
-
-static int debug_populate(struct cgroup_subsys *ss, struct cgroup *cont)
-{
- return cgroup_add_files(cont, ss, files, ARRAY_SIZE(files));
-}
-
-struct cgroup_subsys debug_subsys = {
- .name = "debug",
- .create = debug_create,
- .destroy = debug_destroy,
- .populate = debug_populate,
- .subsys_id = debug_subsys_id,
-};
*/
static int freezer_can_attach(struct cgroup_subsys *ss,
struct cgroup *new_cgroup,
- struct task_struct *task)
+ struct task_struct *task, bool threadgroup)
{
struct freezer *freezer;
if (freezer->state == CGROUP_FROZEN)
return -EBUSY;
+ if (threadgroup) {
+ struct task_struct *c;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &task->thread_group, thread_group) {
+ if (is_task_frozen_enough(c)) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+ }
+ rcu_read_unlock();
+ }
+
return 0;
}
static cpumask_var_t cpus_attach;
/* Called by cgroups to determine if a cpuset is usable; cgroup_mutex held */
-static int cpuset_can_attach(struct cgroup_subsys *ss,
- struct cgroup *cont, struct task_struct *tsk)
+static int cpuset_can_attach(struct cgroup_subsys *ss, struct cgroup *cont,
+ struct task_struct *tsk, bool threadgroup)
{
+ int ret;
struct cpuset *cs = cgroup_cs(cont);
if (cpumask_empty(cs->cpus_allowed) || nodes_empty(cs->mems_allowed))
if (tsk->flags & PF_THREAD_BOUND)
return -EINVAL;
- return security_task_setscheduler(tsk, 0, NULL);
+ ret = security_task_setscheduler(tsk, 0, NULL);
+ if (ret)
+ return ret;
+ if (threadgroup) {
+ struct task_struct *c;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ ret = security_task_setscheduler(c, 0, NULL);
+ if (ret) {
+ rcu_read_unlock();
+ return ret;
+ }
+ }
+ rcu_read_unlock();
+ }
+ return 0;
+}
+
+static void cpuset_attach_task(struct task_struct *tsk, nodemask_t *to,
+ struct cpuset *cs)
+{
+ int err;
+ /*
+ * can_attach beforehand should guarantee that this doesn't fail.
+ * TODO: have a better way to handle failure here
+ */
+ err = set_cpus_allowed_ptr(tsk, cpus_attach);
+ WARN_ON_ONCE(err);
+
+ task_lock(tsk);
+ cpuset_change_task_nodemask(tsk, to);
+ task_unlock(tsk);
+ cpuset_update_task_spread_flag(cs, tsk);
+
}
-static void cpuset_attach(struct cgroup_subsys *ss,
- struct cgroup *cont, struct cgroup *oldcont,
- struct task_struct *tsk)
+static void cpuset_attach(struct cgroup_subsys *ss, struct cgroup *cont,
+ struct cgroup *oldcont, struct task_struct *tsk,
+ bool threadgroup)
{
nodemask_t from, to;
struct mm_struct *mm;
struct cpuset *cs = cgroup_cs(cont);
struct cpuset *oldcs = cgroup_cs(oldcont);
- int err;
if (cs == &top_cpuset) {
cpumask_copy(cpus_attach, cpu_possible_mask);
guarantee_online_cpus(cs, cpus_attach);
guarantee_online_mems(cs, &to);
}
- err = set_cpus_allowed_ptr(tsk, cpus_attach);
- if (err)
- return;
- task_lock(tsk);
- cpuset_change_task_nodemask(tsk, &to);
- task_unlock(tsk);
- cpuset_update_task_spread_flag(cs, tsk);
+ /* do per-task migration stuff possibly for each in the threadgroup */
+ cpuset_attach_task(tsk, &to, cs);
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ cpuset_attach_task(c, &to, cs);
+ }
+ rcu_read_unlock();
+ }
+ /* change mm; only needs to be done once even if threadgroup */
from = oldcs->mems_allowed;
to = cs->mems_allowed;
mm = get_task_mm(tsk);
#ifdef CONFIG_DEBUG_CREDENTIALS
+bool creds_are_invalid(const struct cred *cred)
+{
+ if (cred->magic != CRED_MAGIC)
+ return true;
+ if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
+ return true;
+#ifdef CONFIG_SECURITY_SELINUX
+ if (selinux_is_enabled()) {
+ if ((unsigned long) cred->security < PAGE_SIZE)
+ return true;
+ if ((*(u32 *)cred->security & 0xffffff00) ==
+ (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8))
+ return true;
+ }
+#endif
+ return false;
+}
+EXPORT_SYMBOL(creds_are_invalid);
+
/*
* dump invalid credentials
*/
disassociate_ctty(1);
module_put(task_thread_info(tsk)->exec_domain->module);
- if (tsk->binfmt)
- module_put(tsk->binfmt->module);
proc_exit_connector(tsk);
int __user *wo_stat;
struct rusage __user *wo_rusage;
+ wait_queue_t child_wait;
int notask_error;
};
-static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
+static inline
+struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
{
- struct pid *pid = NULL;
- if (type == PIDTYPE_PID)
- pid = task->pids[type].pid;
- else if (type < PIDTYPE_MAX)
- pid = task->group_leader->pids[type].pid;
- return pid;
+ if (type != PIDTYPE_PID)
+ task = task->group_leader;
+ return task->pids[type].pid;
}
-static int eligible_child(struct wait_opts *wo, struct task_struct *p)
+static int eligible_pid(struct wait_opts *wo, struct task_struct *p)
{
- int err;
-
- if (wo->wo_type < PIDTYPE_MAX) {
- if (task_pid_type(p, wo->wo_type) != wo->wo_pid)
- return 0;
- }
+ return wo->wo_type == PIDTYPE_MAX ||
+ task_pid_type(p, wo->wo_type) == wo->wo_pid;
+}
+static int eligible_child(struct wait_opts *wo, struct task_struct *p)
+{
+ if (!eligible_pid(wo, p))
+ return 0;
/* Wait for all children (clone and not) if __WALL is set;
* otherwise, wait for clone children *only* if __WCLONE is
* set; otherwise, wait for non-clone children *only*. (Note:
&& !(wo->wo_flags & __WALL))
return 0;
- err = security_task_wait(p);
- if (err)
- return err;
-
return 1;
}
put_task_struct(p);
infop = wo->wo_info;
- if (!retval)
- retval = put_user(SIGCHLD, &infop->si_signo);
- if (!retval)
- retval = put_user(0, &infop->si_errno);
- if (!retval)
- retval = put_user((short)why, &infop->si_code);
- if (!retval)
- retval = put_user(pid, &infop->si_pid);
- if (!retval)
- retval = put_user(uid, &infop->si_uid);
- if (!retval)
- retval = put_user(status, &infop->si_status);
+ if (infop) {
+ if (!retval)
+ retval = put_user(SIGCHLD, &infop->si_signo);
+ if (!retval)
+ retval = put_user(0, &infop->si_errno);
+ if (!retval)
+ retval = put_user((short)why, &infop->si_code);
+ if (!retval)
+ retval = put_user(pid, &infop->si_pid);
+ if (!retval)
+ retval = put_user(uid, &infop->si_uid);
+ if (!retval)
+ retval = put_user(status, &infop->si_status);
+ }
if (!retval)
retval = pid;
return retval;
* then ->notask_error is 0 if @p is an eligible child,
* or another error from security_task_wait(), or still -ECHILD.
*/
-static int wait_consider_task(struct wait_opts *wo, struct task_struct *parent,
- int ptrace, struct task_struct *p)
+static int wait_consider_task(struct wait_opts *wo, int ptrace,
+ struct task_struct *p)
{
int ret = eligible_child(wo, p);
if (!ret)
return ret;
+ ret = security_task_wait(p);
if (unlikely(ret < 0)) {
/*
* If we have not yet seen any eligible child,
* Do not consider detached threads.
*/
if (!task_detached(p)) {
- int ret = wait_consider_task(wo, tsk, 0, p);
+ int ret = wait_consider_task(wo, 0, p);
if (ret)
return ret;
}
struct task_struct *p;
list_for_each_entry(p, &tsk->ptraced, ptrace_entry) {
- int ret = wait_consider_task(wo, tsk, 1, p);
+ int ret = wait_consider_task(wo, 1, p);
if (ret)
return ret;
}
return 0;
}
+static int child_wait_callback(wait_queue_t *wait, unsigned mode,
+ int sync, void *key)
+{
+ struct wait_opts *wo = container_of(wait, struct wait_opts,
+ child_wait);
+ struct task_struct *p = key;
+
+ if (!eligible_pid(wo, p))
+ return 0;
+
+ if ((wo->wo_flags & __WNOTHREAD) && wait->private != p->parent)
+ return 0;
+
+ return default_wake_function(wait, mode, sync, key);
+}
+
+void __wake_up_parent(struct task_struct *p, struct task_struct *parent)
+{
+ __wake_up_sync_key(&parent->signal->wait_chldexit,
+ TASK_INTERRUPTIBLE, 1, p);
+}
+
static long do_wait(struct wait_opts *wo)
{
- DECLARE_WAITQUEUE(wait, current);
struct task_struct *tsk;
int retval;
trace_sched_process_wait(wo->wo_pid);
- add_wait_queue(¤t->signal->wait_chldexit,&wait);
+ init_waitqueue_func_entry(&wo->child_wait, child_wait_callback);
+ wo->child_wait.private = current;
+ add_wait_queue(¤t->signal->wait_chldexit, &wo->child_wait);
repeat:
/*
* If there is nothing that can match our critiera just get out.
}
end:
__set_current_state(TASK_RUNNING);
- remove_wait_queue(¤t->signal->wait_chldexit,&wait);
- if (wo->wo_info) {
- struct siginfo __user *infop = wo->wo_info;
-
- if (retval > 0)
- retval = 0;
- else {
- /*
- * For a WNOHANG return, clear out all the fields
- * we would set so the user can easily tell the
- * difference.
- */
- if (!retval)
- retval = put_user(0, &infop->si_signo);
- if (!retval)
- retval = put_user(0, &infop->si_errno);
- if (!retval)
- retval = put_user(0, &infop->si_code);
- if (!retval)
- retval = put_user(0, &infop->si_pid);
- if (!retval)
- retval = put_user(0, &infop->si_uid);
- if (!retval)
- retval = put_user(0, &infop->si_status);
- }
- }
+ remove_wait_queue(¤t->signal->wait_chldexit, &wo->child_wait);
return retval;
}
wo.wo_stat = NULL;
wo.wo_rusage = ru;
ret = do_wait(&wo);
+
+ if (ret > 0) {
+ ret = 0;
+ } else if (infop) {
+ /*
+ * For a WNOHANG return, clear out all the fields
+ * we would set so the user can easily tell the
+ * difference.
+ */
+ if (!ret)
+ ret = put_user(0, &infop->si_signo);
+ if (!ret)
+ ret = put_user(0, &infop->si_errno);
+ if (!ret)
+ ret = put_user(0, &infop->si_code);
+ if (!ret)
+ ret = put_user(0, &infop->si_pid);
+ if (!ret)
+ ret = put_user(0, &infop->si_uid);
+ if (!ret)
+ ret = put_user(0, &infop->si_status);
+ }
+
put_pid(pid);
/* avoid REGPARM breakage on x86: */
#include <linux/init_task.h>
+static void mm_init_aio(struct mm_struct *mm)
+{
+#ifdef CONFIG_AIO
+ spin_lock_init(&mm->ioctx_lock);
+ INIT_HLIST_HEAD(&mm->ioctx_list);
+#endif
+}
+
static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
{
atomic_set(&mm->mm_users, 1);
set_mm_counter(mm, file_rss, 0);
set_mm_counter(mm, anon_rss, 0);
spin_lock_init(&mm->page_table_lock);
- spin_lock_init(&mm->ioctx_lock);
- INIT_HLIST_HEAD(&mm->ioctx_list);
mm->free_area_cache = TASK_UNMAPPED_BASE;
mm->cached_hole_size = ~0UL;
+ mm_init_aio(mm);
mm_init_owner(mm, p);
if (likely(!mm_alloc_pgd(mm))) {
spin_unlock(&mmlist_lock);
}
put_swap_token(mm);
+ if (mm->binfmt)
+ module_put(mm->binfmt->module);
mmdrop(mm);
}
}
mm->hiwater_rss = get_mm_rss(mm);
mm->hiwater_vm = mm->total_vm;
+ if (mm->binfmt && !try_module_get(mm->binfmt->module))
+ goto free_pt;
+
return mm;
free_pt:
+ /* don't put binfmt in mmput, we haven't got module yet */
+ mm->binfmt = NULL;
mmput(mm);
fail_nomem:
if ((clone_flags & CLONE_SIGHAND) && !(clone_flags & CLONE_VM))
return ERR_PTR(-EINVAL);
+ /*
+ * Siblings of global init remain as zombies on exit since they are
+ * not reaped by their parent (swapper). To solve this and to avoid
+ * multi-rooted process trees, prevent global and container-inits
+ * from creating siblings.
+ */
+ if ((clone_flags & CLONE_PARENT) &&
+ current->signal->flags & SIGNAL_UNKILLABLE)
+ return ERR_PTR(-EINVAL);
+
retval = security_task_create(clone_flags);
if (retval)
goto fork_out;
if (!try_module_get(task_thread_info(p)->exec_domain->module))
goto bad_fork_cleanup_count;
- if (p->binfmt && !try_module_get(p->binfmt->module))
- goto bad_fork_cleanup_put_domain;
-
p->did_exec = 0;
delayacct_tsk_init(p); /* Must remain after dup_task_struct() */
copy_flags(clone_flags, p);
#endif
cgroup_exit(p, cgroup_callbacks_done);
delayacct_tsk_free(p);
- if (p->binfmt)
- module_put(p->binfmt->module);
-bad_fork_cleanup_put_domain:
module_put(task_thread_info(p)->exec_domain->module);
bad_fork_cleanup_count:
atomic_dec(&p->cred->user->processes);
config GCOV_PROFILE_ALL
bool "Profile entire Kernel"
depends on GCOV_KERNEL
- depends on S390 || X86 || (PPC && EXPERIMENTAL)
+ depends on S390 || X86 || (PPC && EXPERIMENTAL) || MICROBLAZE
default n
---help---
This options activates profiling for the entire kernel.
* Process updating of timeout sysctl
*/
int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
if (ret || !write)
goto out;
static int ____call_usermodehelper(void *data)
{
struct subprocess_info *sub_info = data;
- enum umh_wait wait = sub_info->wait;
int retval;
BUG_ON(atomic_read(&sub_info->cred->usage) != 1);
*/
set_user_nice(current, 0);
- if (wait == UMH_WAIT_EXEC)
- complete(sub_info->complete);
-
retval = kernel_execve(sub_info->path, sub_info->argv, sub_info->envp);
/* Exec failed? */
- if (wait != UMH_WAIT_EXEC)
- sub_info->retval = retval;
+ sub_info->retval = retval;
do_exit(0);
}
switch (wait) {
case UMH_NO_WAIT:
- case UMH_WAIT_EXEC:
break;
case UMH_WAIT_PROC:
if (pid > 0)
break;
sub_info->retval = pid;
- break;
+ /* FALLTHROUGH */
+
+ case UMH_WAIT_EXEC:
+ complete(sub_info->complete);
}
}
}
}
+static void free_modinfo(struct module *mod)
+{
+ struct module_attribute *attr;
+ int i;
+
+ for (i = 0; (attr = modinfo_attrs[i]); i++) {
+ if (attr->free)
+ attr->free(mod);
+ }
+}
+
#ifdef CONFIG_KALLSYMS
/* lookup symbol in given range of kernel_symbols */
return '?';
}
+static bool is_core_symbol(const Elf_Sym *src, const Elf_Shdr *sechdrs,
+ unsigned int shnum)
+{
+ const Elf_Shdr *sec;
+
+ if (src->st_shndx == SHN_UNDEF
+ || src->st_shndx >= shnum
+ || !src->st_name)
+ return false;
+
+ sec = sechdrs + src->st_shndx;
+ if (!(sec->sh_flags & SHF_ALLOC)
+#ifndef CONFIG_KALLSYMS_ALL
+ || !(sec->sh_flags & SHF_EXECINSTR)
+#endif
+ || (sec->sh_entsize & INIT_OFFSET_MASK))
+ return false;
+
+ return true;
+}
+
+static unsigned long layout_symtab(struct module *mod,
+ Elf_Shdr *sechdrs,
+ unsigned int symindex,
+ unsigned int strindex,
+ const Elf_Ehdr *hdr,
+ const char *secstrings,
+ unsigned long *pstroffs,
+ unsigned long *strmap)
+{
+ unsigned long symoffs;
+ Elf_Shdr *symsect = sechdrs + symindex;
+ Elf_Shdr *strsect = sechdrs + strindex;
+ const Elf_Sym *src;
+ const char *strtab;
+ unsigned int i, nsrc, ndst;
+
+ /* Put symbol section at end of init part of module. */
+ symsect->sh_flags |= SHF_ALLOC;
+ symsect->sh_entsize = get_offset(mod, &mod->init_size, symsect,
+ symindex) | INIT_OFFSET_MASK;
+ DEBUGP("\t%s\n", secstrings + symsect->sh_name);
+
+ src = (void *)hdr + symsect->sh_offset;
+ nsrc = symsect->sh_size / sizeof(*src);
+ strtab = (void *)hdr + strsect->sh_offset;
+ for (ndst = i = 1; i < nsrc; ++i, ++src)
+ if (is_core_symbol(src, sechdrs, hdr->e_shnum)) {
+ unsigned int j = src->st_name;
+
+ while(!__test_and_set_bit(j, strmap) && strtab[j])
+ ++j;
+ ++ndst;
+ }
+
+ /* Append room for core symbols at end of core part. */
+ symoffs = ALIGN(mod->core_size, symsect->sh_addralign ?: 1);
+ mod->core_size = symoffs + ndst * sizeof(Elf_Sym);
+
+ /* Put string table section at end of init part of module. */
+ strsect->sh_flags |= SHF_ALLOC;
+ strsect->sh_entsize = get_offset(mod, &mod->init_size, strsect,
+ strindex) | INIT_OFFSET_MASK;
+ DEBUGP("\t%s\n", secstrings + strsect->sh_name);
+
+ /* Append room for core symbols' strings at end of core part. */
+ *pstroffs = mod->core_size;
+ __set_bit(0, strmap);
+ mod->core_size += bitmap_weight(strmap, strsect->sh_size);
+
+ return symoffs;
+}
+
static void add_kallsyms(struct module *mod,
Elf_Shdr *sechdrs,
+ unsigned int shnum,
unsigned int symindex,
unsigned int strindex,
- const char *secstrings)
+ unsigned long symoffs,
+ unsigned long stroffs,
+ const char *secstrings,
+ unsigned long *strmap)
{
- unsigned int i;
+ unsigned int i, ndst;
+ const Elf_Sym *src;
+ Elf_Sym *dst;
+ char *s;
mod->symtab = (void *)sechdrs[symindex].sh_addr;
mod->num_symtab = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
for (i = 0; i < mod->num_symtab; i++)
mod->symtab[i].st_info
= elf_type(&mod->symtab[i], sechdrs, secstrings, mod);
+
+ mod->core_symtab = dst = mod->module_core + symoffs;
+ src = mod->symtab;
+ *dst = *src;
+ for (ndst = i = 1; i < mod->num_symtab; ++i, ++src) {
+ if (!is_core_symbol(src, sechdrs, shnum))
+ continue;
+ dst[ndst] = *src;
+ dst[ndst].st_name = bitmap_weight(strmap, dst[ndst].st_name);
+ ++ndst;
+ }
+ mod->core_num_syms = ndst;
+
+ mod->core_strtab = s = mod->module_core + stroffs;
+ for (*s = 0, i = 1; i < sechdrs[strindex].sh_size; ++i)
+ if (test_bit(i, strmap))
+ *++s = mod->strtab[i];
}
#else
+static inline unsigned long layout_symtab(struct module *mod,
+ Elf_Shdr *sechdrs,
+ unsigned int symindex,
+ unsigned int strindex,
+ const Elf_Hdr *hdr,
+ const char *secstrings,
+ unsigned long *pstroffs,
+ unsigned long *strmap)
+{
+}
static inline void add_kallsyms(struct module *mod,
Elf_Shdr *sechdrs,
+ unsigned int shnum,
unsigned int symindex,
unsigned int strindex,
- const char *secstrings)
+ unsigned long symoffs,
+ unsigned long stroffs,
+ const char *secstrings,
+ const unsigned long *strmap)
{
}
#endif /* CONFIG_KALLSYMS */
struct module *mod;
long err = 0;
void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
+#ifdef CONFIG_KALLSYMS
+ unsigned long symoffs, stroffs, *strmap;
+#endif
mm_segment_t old_fs;
DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
/* Don't keep modinfo and version sections. */
sechdrs[infoindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
sechdrs[versindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
-#ifdef CONFIG_KALLSYMS
- /* Keep symbol and string tables for decoding later. */
- sechdrs[symindex].sh_flags |= SHF_ALLOC;
- sechdrs[strindex].sh_flags |= SHF_ALLOC;
-#endif
/* Check module struct version now, before we try to use module. */
if (!check_modstruct_version(sechdrs, versindex, mod)) {
goto free_hdr;
}
+ strmap = kzalloc(BITS_TO_LONGS(sechdrs[strindex].sh_size)
+ * sizeof(long), GFP_KERNEL);
+ if (!strmap) {
+ err = -ENOMEM;
+ goto free_mod;
+ }
+
if (find_module(mod->name)) {
err = -EEXIST;
goto free_mod;
this is done generically; there doesn't appear to be any
special cases for the architectures. */
layout_sections(mod, hdr, sechdrs, secstrings);
+ symoffs = layout_symtab(mod, sechdrs, symindex, strindex, hdr,
+ secstrings, &stroffs, strmap);
/* Do the allocs. */
ptr = module_alloc_update_bounds(mod->core_size);
percpu_modcopy(mod->percpu, (void *)sechdrs[pcpuindex].sh_addr,
sechdrs[pcpuindex].sh_size);
- add_kallsyms(mod, sechdrs, symindex, strindex, secstrings);
+ add_kallsyms(mod, sechdrs, hdr->e_shnum, symindex, strindex,
+ symoffs, stroffs, secstrings, strmap);
+ kfree(strmap);
+ strmap = NULL;
if (!mod->taints) {
struct _ddebug *debug;
synchronize_sched();
module_arch_cleanup(mod);
cleanup:
+ free_modinfo(mod);
kobject_del(&mod->mkobj.kobj);
kobject_put(&mod->mkobj.kobj);
free_unload:
module_unload_free(mod);
#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
- free_init:
percpu_modfree(mod->refptr);
+ free_init:
#endif
module_free(mod, mod->module_init);
free_core:
percpu_modfree(percpu);
free_mod:
kfree(args);
+ kfree(strmap);
free_hdr:
vfree(hdr);
return ERR_PTR(err);
/* Drop initial reference. */
module_put(mod);
trim_init_extable(mod);
+#ifdef CONFIG_KALLSYMS
+ mod->num_symtab = mod->core_num_syms;
+ mod->symtab = mod->core_symtab;
+ mod->strtab = mod->core_strtab;
+#endif
module_free(mod, mod->module_init);
mod->module_init = NULL;
mod->init_size = 0;
* (hence either you are in the same cgroup as task, or in an
* ancestor cgroup thereof)
*/
-static int ns_can_attach(struct cgroup_subsys *ss,
- struct cgroup *new_cgroup, struct task_struct *task)
+static int ns_can_attach(struct cgroup_subsys *ss, struct cgroup *new_cgroup,
+ struct task_struct *task, bool threadgroup)
{
if (current != task) {
if (!capable(CAP_SYS_ADMIN))
if (!cgroup_is_descendant(new_cgroup, task))
return -EPERM;
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &task->thread_group, thread_group) {
+ if (!cgroup_is_descendant(new_cgroup, c)) {
+ rcu_read_unlock();
+ return -EPERM;
+ }
+ }
+ rcu_read_unlock();
+ }
+
return 0;
}
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/ctype.h>
#if 0
#define DEBUGP printk
}
for (i = 0; args[i]; i++) {
- if (args[i] == ' ' && !in_quote)
+ if (isspace(args[i]) && !in_quote)
break;
if (equals == 0) {
if (args[i] == '=')
next = args + i;
/* Chew up trailing spaces. */
- while (*next == ' ')
+ while (isspace(*next))
next++;
return next;
}
DEBUGP("Parsing ARGS: %s\n", args);
/* Chew leading spaces */
- while (*args == ' ')
+ while (isspace(*args))
args++;
while (*args) {
{
if (!(flags & CLONE_NEWPID))
return get_pid_ns(old_ns);
- if (flags & CLONE_THREAD)
+ if (flags & (CLONE_THREAD|CLONE_PARENT))
return ERR_PTR(-EINVAL);
return create_pid_namespace(old_ns);
}
#include <linux/module.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/genhd.h>
* or self-reaping. Do notification now if it would have happened earlier.
* If it should reap itself, return true.
*
- * If it's our own child, there is no notification to do.
- * But if our normal children self-reap, then this child
- * was prevented by ptrace and we must reap it now.
+ * If it's our own child, there is no notification to do. But if our normal
+ * children self-reap, then this child was prevented by ptrace and we must
+ * reap it now, in that case we must also wake up sub-threads sleeping in
+ * do_wait().
*/
static bool __ptrace_detach(struct task_struct *tracer, struct task_struct *p)
{
if (!task_detached(p) && thread_group_empty(p)) {
if (!same_thread_group(p->real_parent, tracer))
do_notify_parent(p, p->exit_signal);
- else if (ignoring_children(tracer->sighand))
+ else if (ignoring_children(tracer->sighand)) {
+ __wake_up_parent(p, tracer);
p->exit_signal = -1;
+ }
}
if (task_detached(p)) {
/* Mark it as in the process of being reaped. */
{
spin_lock_init(&counter->lock);
counter->limit = RESOURCE_MAX;
+ counter->soft_limit = RESOURCE_MAX;
counter->parent = parent;
}
}
int res_counter_charge(struct res_counter *counter, unsigned long val,
- struct res_counter **limit_fail_at)
+ struct res_counter **limit_fail_at,
+ struct res_counter **soft_limit_fail_at)
{
int ret;
unsigned long flags;
struct res_counter *c, *u;
*limit_fail_at = NULL;
+ if (soft_limit_fail_at)
+ *soft_limit_fail_at = NULL;
local_irq_save(flags);
for (c = counter; c != NULL; c = c->parent) {
spin_lock(&c->lock);
ret = res_counter_charge_locked(c, val);
+ /*
+ * With soft limits, we return the highest ancestor
+ * that exceeds its soft limit
+ */
+ if (soft_limit_fail_at &&
+ !res_counter_soft_limit_check_locked(c))
+ *soft_limit_fail_at = c;
spin_unlock(&c->lock);
if (ret < 0) {
*limit_fail_at = c;
counter->usage -= val;
}
-void res_counter_uncharge(struct res_counter *counter, unsigned long val)
+void res_counter_uncharge(struct res_counter *counter, unsigned long val,
+ bool *was_soft_limit_excess)
{
unsigned long flags;
struct res_counter *c;
local_irq_save(flags);
for (c = counter; c != NULL; c = c->parent) {
spin_lock(&c->lock);
+ if (was_soft_limit_excess)
+ *was_soft_limit_excess =
+ !res_counter_soft_limit_check_locked(c);
res_counter_uncharge_locked(c, val);
spin_unlock(&c->lock);
}
return &counter->limit;
case RES_FAILCNT:
return &counter->failcnt;
+ case RES_SOFT_LIMIT:
+ return &counter->soft_limit;
};
BUG();
#endif /* CONFIG_RT_GROUP_SCHED */
int sched_rt_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
old_period = sysctl_sched_rt_period;
old_runtime = sysctl_sched_rt_runtime;
- ret = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (!ret && write) {
ret = sched_rt_global_constraints();
}
static int
-cpu_cgroup_can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct task_struct *tsk)
+cpu_cgroup_can_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
{
#ifdef CONFIG_RT_GROUP_SCHED
if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk))
if (tsk->sched_class != &fair_sched_class)
return -EINVAL;
#endif
+ return 0;
+}
+static int
+cpu_cgroup_can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
+ struct task_struct *tsk, bool threadgroup)
+{
+ int retval = cpu_cgroup_can_attach_task(cgrp, tsk);
+ if (retval)
+ return retval;
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ retval = cpu_cgroup_can_attach_task(cgrp, c);
+ if (retval) {
+ rcu_read_unlock();
+ return retval;
+ }
+ }
+ rcu_read_unlock();
+ }
return 0;
}
static void
cpu_cgroup_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cont, struct task_struct *tsk)
+ struct cgroup *old_cont, struct task_struct *tsk,
+ bool threadgroup)
{
sched_move_task(tsk);
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ sched_move_task(c);
+ }
+ rcu_read_unlock();
+ }
}
#ifdef CONFIG_FAIR_GROUP_SCHED
#ifdef CONFIG_SCHED_DEBUG
int sched_nr_latency_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
- int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret || !write)
return ret;
if (why) {
/*
- * The first thread which returns from finish_stop()
+ * The first thread which returns from do_signal_stop()
* will take ->siglock, notice SIGNAL_CLD_MASK, and
* notify its parent. See get_signal_to_deliver().
*/
return send_signal(sig, info, t, 0);
}
+int do_send_sig_info(int sig, struct siginfo *info, struct task_struct *p,
+ bool group)
+{
+ unsigned long flags;
+ int ret = -ESRCH;
+
+ if (lock_task_sighand(p, &flags)) {
+ ret = send_signal(sig, info, p, group);
+ unlock_task_sighand(p, &flags);
+ }
+
+ return ret;
+}
+
/*
* Force a signal that the process can't ignore: if necessary
* we unblock the signal and change any SIG_IGN to SIG_DFL.
}
}
-int __fatal_signal_pending(struct task_struct *tsk)
-{
- return sigismember(&tsk->pending.signal, SIGKILL);
-}
-EXPORT_SYMBOL(__fatal_signal_pending);
-
struct sighand_struct *lock_task_sighand(struct task_struct *tsk, unsigned long *flags)
{
struct sighand_struct *sighand;
*/
int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
{
- unsigned long flags;
- int ret;
+ int ret = check_kill_permission(sig, info, p);
- ret = check_kill_permission(sig, info, p);
-
- if (!ret && sig) {
- ret = -ESRCH;
- if (lock_task_sighand(p, &flags)) {
- ret = __group_send_sig_info(sig, info, p);
- unlock_task_sighand(p, &flags);
- }
- }
+ if (!ret && sig)
+ ret = do_send_sig_info(sig, info, p, true);
return ret;
}
* These are for backward compatibility with the rest of the kernel source.
*/
-/*
- * The caller must ensure the task can't exit.
- */
int
send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
{
- int ret;
- unsigned long flags;
-
/*
* Make sure legacy kernel users don't send in bad values
* (normal paths check this in check_kill_permission).
if (!valid_signal(sig))
return -EINVAL;
- spin_lock_irqsave(&p->sighand->siglock, flags);
- ret = specific_send_sig_info(sig, info, p);
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
- return ret;
+ return do_send_sig_info(sig, info, p, false);
}
#define __si_special(priv) \
return ret;
}
-/*
- * Wake up any threads in the parent blocked in wait* syscalls.
- */
-static inline void __wake_up_parent(struct task_struct *p,
- struct task_struct *parent)
-{
- wake_up_interruptible_sync(&parent->signal->wait_chldexit);
-}
-
/*
* Let a parent know about the death of a child.
* For a stopped/continued status change, use do_notify_parent_cldstop instead.
spin_unlock_irq(¤t->sighand->siglock);
}
-static void
-finish_stop(int stop_count)
-{
- /*
- * If there are no other threads in the group, or if there is
- * a group stop in progress and we are the last to stop,
- * report to the parent. When ptraced, every thread reports itself.
- */
- if (tracehook_notify_jctl(stop_count == 0, CLD_STOPPED)) {
- read_lock(&tasklist_lock);
- do_notify_parent_cldstop(current, CLD_STOPPED);
- read_unlock(&tasklist_lock);
- }
-
- do {
- schedule();
- } while (try_to_freeze());
- /*
- * Now we don't run again until continued.
- */
- current->exit_code = 0;
-}
-
/*
* This performs the stopping for SIGSTOP and other stop signals.
* We have to stop all threads in the thread group.
static int do_signal_stop(int signr)
{
struct signal_struct *sig = current->signal;
- int stop_count;
+ int notify;
- if (sig->group_stop_count > 0) {
- /*
- * There is a group stop in progress. We don't need to
- * start another one.
- */
- stop_count = --sig->group_stop_count;
- } else {
+ if (!sig->group_stop_count) {
struct task_struct *t;
if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
*/
sig->group_exit_code = signr;
- stop_count = 0;
+ sig->group_stop_count = 1;
for (t = next_thread(current); t != current; t = next_thread(t))
/*
* Setting state to TASK_STOPPED for a group
*/
if (!(t->flags & PF_EXITING) &&
!task_is_stopped_or_traced(t)) {
- stop_count++;
+ sig->group_stop_count++;
signal_wake_up(t, 0);
}
- sig->group_stop_count = stop_count;
}
+ /*
+ * If there are no other threads in the group, or if there is
+ * a group stop in progress and we are the last to stop, report
+ * to the parent. When ptraced, every thread reports itself.
+ */
+ notify = sig->group_stop_count == 1 ? CLD_STOPPED : 0;
+ notify = tracehook_notify_jctl(notify, CLD_STOPPED);
+ /*
+ * tracehook_notify_jctl() can drop and reacquire siglock, so
+ * we keep ->group_stop_count != 0 before the call. If SIGCONT
+ * or SIGKILL comes in between ->group_stop_count == 0.
+ */
+ if (sig->group_stop_count) {
+ if (!--sig->group_stop_count)
+ sig->flags = SIGNAL_STOP_STOPPED;
+ current->exit_code = sig->group_exit_code;
+ __set_current_state(TASK_STOPPED);
+ }
+ spin_unlock_irq(¤t->sighand->siglock);
- if (stop_count == 0)
- sig->flags = SIGNAL_STOP_STOPPED;
- current->exit_code = sig->group_exit_code;
- __set_current_state(TASK_STOPPED);
+ if (notify) {
+ read_lock(&tasklist_lock);
+ do_notify_parent_cldstop(current, notify);
+ read_unlock(&tasklist_lock);
+ }
+
+ /* Now we don't run again until woken by SIGCONT or SIGKILL */
+ do {
+ schedule();
+ } while (try_to_freeze());
+
+ tracehook_finish_jctl();
+ current->exit_code = 0;
- spin_unlock_irq(¤t->sighand->siglock);
- finish_stop(stop_count);
return 1;
}
int why = (signal->flags & SIGNAL_STOP_CONTINUED)
? CLD_CONTINUED : CLD_STOPPED;
signal->flags &= ~SIGNAL_CLD_MASK;
- spin_unlock_irq(&sighand->siglock);
- if (unlikely(!tracehook_notify_jctl(1, why)))
- goto relock;
+ why = tracehook_notify_jctl(why, CLD_CONTINUED);
+ spin_unlock_irq(&sighand->siglock);
- read_lock(&tasklist_lock);
- do_notify_parent_cldstop(current->group_leader, why);
- read_unlock(&tasklist_lock);
+ if (why) {
+ read_lock(&tasklist_lock);
+ do_notify_parent_cldstop(current->group_leader, why);
+ read_unlock(&tasklist_lock);
+ }
goto relock;
}
if (unlikely(tsk->signal->group_stop_count) &&
!--tsk->signal->group_stop_count) {
tsk->signal->flags = SIGNAL_STOP_STOPPED;
- group_stop = 1;
+ group_stop = tracehook_notify_jctl(CLD_STOPPED, CLD_STOPPED);
}
out:
spin_unlock_irq(&tsk->sighand->siglock);
- if (unlikely(group_stop) && tracehook_notify_jctl(1, CLD_STOPPED)) {
+ if (unlikely(group_stop)) {
read_lock(&tasklist_lock);
- do_notify_parent_cldstop(tsk, CLD_STOPPED);
+ do_notify_parent_cldstop(tsk, group_stop);
read_unlock(&tasklist_lock);
}
}
do_send_specific(pid_t tgid, pid_t pid, int sig, struct siginfo *info)
{
struct task_struct *p;
- unsigned long flags;
int error = -ESRCH;
rcu_read_lock();
/*
* The null signal is a permissions and process existence
* probe. No signal is actually delivered.
- *
- * If lock_task_sighand() fails we pretend the task dies
- * after receiving the signal. The window is tiny, and the
- * signal is private anyway.
*/
- if (!error && sig && lock_task_sighand(p, &flags)) {
- error = specific_send_sig_info(sig, info, p);
- unlock_task_sighand(p, &flags);
+ if (!error && sig) {
+ error = do_send_sig_info(sig, info, p, false);
+ /*
+ * If lock_task_sighand() failed we pretend the task
+ * dies after receiving the signal. The window is tiny,
+ * and the signal is private anyway.
+ */
+ if (unlikely(error == -ESRCH))
+ error = 0;
}
}
rcu_read_unlock();
static void slow_work_oom_timeout(unsigned long);
#ifdef CONFIG_SYSCTL
-static int slow_work_min_threads_sysctl(struct ctl_table *, int, struct file *,
+static int slow_work_min_threads_sysctl(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-static int slow_work_max_threads_sysctl(struct ctl_table *, int , struct file *,
+static int slow_work_max_threads_sysctl(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
#endif
* Handle adjustment of the minimum number of threads
*/
static int slow_work_min_threads_sysctl(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
int n;
if (ret == 0) {
* Handle adjustment of the maximum number of threads
*/
static int slow_work_max_threads_sysctl(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
int n;
if (ret == 0) {
generic_exec_single(cpu, data, wait);
}
-/* Deprecated: shim for archs using old arch_send_call_function_ipi API. */
-
-#ifndef arch_send_call_function_ipi_mask
-# define arch_send_call_function_ipi_mask(maskp) \
- arch_send_call_function_ipi(*(maskp))
-#endif
-
/**
* smp_call_function_many(): Run a function on a set of other CPUs.
* @mask: The set of cpus to run on (only runs on online subset).
EXPORT_SYMBOL(touch_all_softlockup_watchdogs);
int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
touch_all_softlockup_watchdogs();
- return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
}
/*
current->timer_slack_ns = arg2;
error = 0;
break;
+ case PR_MCE_KILL:
+ if (arg4 | arg5)
+ return -EINVAL;
+ switch (arg2) {
+ case 0:
+ if (arg3 != 0)
+ return -EINVAL;
+ current->flags &= ~PF_MCE_PROCESS;
+ break;
+ case 1:
+ current->flags |= PF_MCE_PROCESS;
+ if (arg3 != 0)
+ current->flags |= PF_MCE_EARLY;
+ else
+ current->flags &= ~PF_MCE_EARLY;
+ break;
+ default:
+ return -EINVAL;
+ }
+ error = 0;
+ break;
+
default:
error = -EINVAL;
break;
cond_syscall(compat_sys_sendmsg);
cond_syscall(sys_recvmsg);
cond_syscall(compat_sys_recvmsg);
+cond_syscall(compat_sys_recvfrom);
cond_syscall(sys_socketcall);
cond_syscall(sys_futex);
cond_syscall(compat_sys_futex);
#include <linux/proc_fs.h>
#include <linux/security.h>
#include <linux/ctype.h>
-#include <linux/utsname.h>
#include <linux/kmemcheck.h>
#include <linux/smp_lock.h>
#include <linux/fs.h>
extern int core_uses_pid;
extern int suid_dumpable;
extern char core_pattern[];
+extern unsigned int core_pipe_limit;
extern int pid_max;
extern int min_free_kbytes;
extern int pid_max_min, pid_max_max;
#endif
#ifdef CONFIG_PROC_SYSCTL
-static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
+static int proc_do_cad_pid(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
-static int proc_taint(struct ctl_table *table, int write, struct file *filp,
+static int proc_taint(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
#endif
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "core_pipe_limit",
+ .data = &core_pipe_limit,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
#ifdef CONFIG_PROC_SYSCTL
{
.procname = "tainted",
.mode = 0644,
.proc_handler = &scan_unevictable_handler,
},
+#ifdef CONFIG_MEMORY_FAILURE
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "memory_failure_early_kill",
+ .data = &sysctl_memory_failure_early_kill,
+ .maxlen = sizeof(sysctl_memory_failure_early_kill),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "memory_failure_recovery",
+ .data = &sysctl_memory_failure_recovery,
+ .maxlen = sizeof(sysctl_memory_failure_recovery),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
+#endif
+
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
#ifdef CONFIG_PROC_SYSCTL
static int _proc_do_string(void* data, int maxlen, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
size_t len;
* proc_dostring - read a string sysctl
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dostring(struct ctl_table *table, int write, struct file *filp,
+int proc_dostring(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return _proc_do_string(table->data, table->maxlen, write, filp,
+ return _proc_do_string(table->data, table->maxlen, write,
buffer, lenp, ppos);
}
}
static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
- int write, struct file *filp, void __user *buffer,
+ int write, void __user *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
#undef TMPBUFLEN
}
-static int do_proc_dointvec(struct ctl_table *table, int write, struct file *filp,
+static int do_proc_dointvec(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
- return __do_proc_dointvec(table->data, table, write, filp,
+ return __do_proc_dointvec(table->data, table, write,
buffer, lenp, ppos, conv, data);
}
* proc_dointvec - read a vector of integers
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
+ return do_proc_dointvec(table,write,buffer,lenp,ppos,
NULL,NULL);
}
* Taint values can only be increased
* This means we can safely use a temporary.
*/
-static int proc_taint(struct ctl_table *table, int write, struct file *filp,
+static int proc_taint(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table t;
t = *table;
t.data = &tmptaint;
- err = proc_doulongvec_minmax(&t, write, filp, buffer, lenp, ppos);
+ err = proc_doulongvec_minmax(&t, write, buffer, lenp, ppos);
if (err < 0)
return err;
* proc_dointvec_minmax - read a vector of integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_dointvec_minmax_conv_param param = {
.min = (int *) table->extra1,
.max = (int *) table->extra2,
};
- return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
+ return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_minmax_conv, ¶m);
}
static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
}
static int do_proc_doulongvec_minmax(struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
return __do_proc_doulongvec_minmax(table->data, table, write,
- filp, buffer, lenp, ppos, convmul, convdiv);
+ buffer, lenp, ppos, convmul, convdiv);
}
/**
* proc_doulongvec_minmax - read a vector of long integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_doulongvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos, 1l, 1l);
+ return do_proc_doulongvec_minmax(table, write, buffer, lenp, ppos, 1l, 1l);
}
/**
* proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
* Returns 0 on success.
*/
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- return do_proc_doulongvec_minmax(table, write, filp, buffer,
+ return do_proc_doulongvec_minmax(table, write, buffer,
lenp, ppos, HZ, 1000l);
}
* proc_dointvec_jiffies - read a vector of integers as seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
+ return do_proc_dointvec(table,write,buffer,lenp,ppos,
do_proc_dointvec_jiffies_conv,NULL);
}
* proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: pointer to the file position
*
* Returns 0 on success.
*/
-int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
+ return do_proc_dointvec(table,write,buffer,lenp,ppos,
do_proc_dointvec_userhz_jiffies_conv,NULL);
}
* proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
+ return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_ms_jiffies_conv, NULL);
}
-static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
+static int proc_do_cad_pid(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct pid *new_pid;
tmp = pid_vnr(cad_pid);
- r = __do_proc_dointvec(&tmp, table, write, filp, buffer,
+ r = __do_proc_dointvec(&tmp, table, write, buffer,
lenp, ppos, NULL, NULL);
if (r || !write)
return r;
#else /* CONFIG_PROC_FS */
-int proc_dostring(struct ctl_table *table, int write, struct file *filp,
+int proc_dostring(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_doulongvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
-obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o timecompare.o
+obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o timecompare.o timeconv.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BUILD) += clockevents.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS) += tick-common.o
--- /dev/null
+/*
+ * Copyright (C) 1993, 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
+ * This file is part of the GNU C Library.
+ * Contributed by Paul Eggert (eggert@twinsun.com).
+ *
+ * The GNU C Library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The GNU C Library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with the GNU C Library; see the file COPYING.LIB. If not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * Converts the calendar time to broken-down time representation
+ * Based on code from glibc-2.6
+ *
+ * 2009-7-14:
+ * Moved from glibc-2.6 to kernel by Zhaolei<zhaolei@cn.fujitsu.com>
+ */
+
+#include <linux/time.h>
+#include <linux/module.h>
+
+/*
+ * Nonzero if YEAR is a leap year (every 4 years,
+ * except every 100th isn't, and every 400th is).
+ */
+static int __isleap(long year)
+{
+ return (year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0);
+}
+
+/* do a mathdiv for long type */
+static long math_div(long a, long b)
+{
+ return a / b - (a % b < 0);
+}
+
+/* How many leap years between y1 and y2, y1 must less or equal to y2 */
+static long leaps_between(long y1, long y2)
+{
+ long leaps1 = math_div(y1 - 1, 4) - math_div(y1 - 1, 100)
+ + math_div(y1 - 1, 400);
+ long leaps2 = math_div(y2 - 1, 4) - math_div(y2 - 1, 100)
+ + math_div(y2 - 1, 400);
+ return leaps2 - leaps1;
+}
+
+/* How many days come before each month (0-12). */
+static const unsigned short __mon_yday[2][13] = {
+ /* Normal years. */
+ {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365},
+ /* Leap years. */
+ {0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366}
+};
+
+#define SECS_PER_HOUR (60 * 60)
+#define SECS_PER_DAY (SECS_PER_HOUR * 24)
+
+/**
+ * time_to_tm - converts the calendar time to local broken-down time
+ *
+ * @totalsecs the number of seconds elapsed since 00:00:00 on January 1, 1970,
+ * Coordinated Universal Time (UTC).
+ * @offset offset seconds adding to totalsecs.
+ * @result pointer to struct tm variable to receive broken-down time
+ */
+void time_to_tm(time_t totalsecs, int offset, struct tm *result)
+{
+ long days, rem, y;
+ const unsigned short *ip;
+
+ days = totalsecs / SECS_PER_DAY;
+ rem = totalsecs % SECS_PER_DAY;
+ rem += offset;
+ while (rem < 0) {
+ rem += SECS_PER_DAY;
+ --days;
+ }
+ while (rem >= SECS_PER_DAY) {
+ rem -= SECS_PER_DAY;
+ ++days;
+ }
+
+ result->tm_hour = rem / SECS_PER_HOUR;
+ rem %= SECS_PER_HOUR;
+ result->tm_min = rem / 60;
+ result->tm_sec = rem % 60;
+
+ /* January 1, 1970 was a Thursday. */
+ result->tm_wday = (4 + days) % 7;
+ if (result->tm_wday < 0)
+ result->tm_wday += 7;
+
+ y = 1970;
+
+ while (days < 0 || days >= (__isleap(y) ? 366 : 365)) {
+ /* Guess a corrected year, assuming 365 days per year. */
+ long yg = y + math_div(days, 365);
+
+ /* Adjust DAYS and Y to match the guessed year. */
+ days -= (yg - y) * 365 + leaps_between(y, yg);
+ y = yg;
+ }
+
+ result->tm_year = y - 1900;
+
+ result->tm_yday = days;
+
+ ip = __mon_yday[__isleap(y)];
+ for (y = 11; days < ip[y]; y--)
+ continue;
+ days -= ip[y];
+
+ result->tm_mon = y;
+ result->tm_mday = days + 1;
+}
+EXPORT_SYMBOL(time_to_tm);
int
ftrace_enable_sysctl(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
mutex_lock(&ftrace_lock);
- ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret || !write || (last_ftrace_enabled == !!ftrace_enabled))
goto out;
if (current_trace)
*iter->trace = *current_trace;
- if (!alloc_cpumask_var(&iter->started, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&iter->started, GFP_KERNEL))
goto fail;
- cpumask_clear(iter->started);
-
if (current_trace && current_trace->print_max)
iter->tr = &max_tr;
else
if (!alloc_cpumask_var(&tracing_cpumask, GFP_KERNEL))
goto out_free_buffer_mask;
- if (!alloc_cpumask_var(&tracing_reader_cpumask, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&tracing_reader_cpumask, GFP_KERNEL))
goto out_free_tracing_cpumask;
/* To save memory, keep the ring buffer size to its minimum */
cpumask_copy(tracing_buffer_mask, cpu_possible_mask);
cpumask_copy(tracing_cpumask, cpu_all_mask);
- cpumask_clear(tracing_reader_cpumask);
/* TODO: make the number of buffers hot pluggable with CPUS */
global_trace.buffer = ring_buffer_alloc(ring_buf_size,
int
stack_trace_sysctl(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
mutex_lock(&stack_sysctl_mutex);
- ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret || !write ||
(last_stack_tracer_enabled == !!stack_tracer_enabled))
*/
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/mman.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
* Special case of dostring for the UTS structure. This has locks
* to observe. Should this be in kernel/sys.c ????
*/
-static int proc_do_uts_string(ctl_table *table, int write, struct file *filp,
+static int proc_do_uts_string(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table uts_table;
int r;
memcpy(&uts_table, table, sizeof(uts_table));
uts_table.data = get_uts(table, write);
- r = proc_dostring(&uts_table,write,filp,buffer,lenp, ppos);
+ r = proc_dostring(&uts_table,write,buffer,lenp, ppos);
put_uts(table, write, uts_table.data);
return r;
}
keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
unless you really know what this hack does.
+config STRIP_ASM_SYMS
+ bool "Strip assembler-generated symbols during link"
+ default n
+ help
+ Strip internal assembler-generated symbols during a link (symbols
+ that look like '.Lxxx') so they don't pollute the output of
+ get_wchan() and suchlike.
+
config UNUSED_SYMBOLS
bool "Enable unused/obsolete exported symbols"
default y if X86
#define GZIP_IOBUF_SIZE (16*1024)
+static int nofill(void *buffer, unsigned int len)
+{
+ return -1;
+}
+
/* Included from initramfs et al code */
STATIC int INIT gunzip(unsigned char *buf, int len,
int(*fill)(void*, unsigned int),
goto gunzip_nomem4;
}
+ if (!fill)
+ fill = nofill;
+
if (len == 0)
len = fill(zbuf, GZIP_IOBUF_SIZE);
#define RC_MODEL_TOTAL_BITS 11
+static int nofill(void *buffer, unsigned int len)
+{
+ return -1;
+}
+
/* Called twice: once at startup and once in rc_normalize() */
static void INIT rc_read(struct rc *rc)
{
int (*fill)(void*, unsigned int),
char *buffer, int buffer_size)
{
- rc->fill = fill;
+ if (fill)
+ rc->fill = fill;
+ else
+ rc->fill = nofill;
rc->buffer = (uint8_t *)buffer;
rc->buffer_size = buffer_size;
rc->buffer_end = rc->buffer + rc->buffer_size;
return p;
}
-static char *ip6_compressed_string(char *p, const struct in6_addr *addr)
+static char *ip6_compressed_string(char *p, const char *addr)
{
int i;
int j;
u8 hi;
u8 lo;
bool needcolon = false;
- bool useIPv4 = ipv6_addr_v4mapped(addr) || ipv6_addr_is_isatap(addr);
+ bool useIPv4;
+ struct in6_addr in6;
+
+ memcpy(&in6, addr, sizeof(struct in6_addr));
+
+ useIPv4 = ipv6_addr_v4mapped(&in6) || ipv6_addr_is_isatap(&in6);
memset(zerolength, 0, sizeof(zerolength));
/* find position of longest 0 run */
for (i = 0; i < range; i++) {
for (j = i; j < range; j++) {
- if (addr->s6_addr16[j] != 0)
+ if (in6.s6_addr16[j] != 0)
break;
zerolength[i]++;
}
needcolon = false;
}
/* hex u16 without leading 0s */
- word = ntohs(addr->s6_addr16[i]);
+ word = ntohs(in6.s6_addr16[i]);
hi = word >> 8;
lo = word & 0xff;
if (hi) {
if (useIPv4) {
if (needcolon)
*p++ = ':';
- p = ip4_string(p, &addr->s6_addr[12], false);
+ p = ip4_string(p, &in6.s6_addr[12], false);
}
*p = '\0';
return p;
}
-static char *ip6_string(char *p, const struct in6_addr *addr, const char *fmt)
+static char *ip6_string(char *p, const char *addr, const char *fmt)
{
int i;
for (i = 0; i < 8; i++) {
- p = pack_hex_byte(p, addr->s6_addr[2 * i]);
- p = pack_hex_byte(p, addr->s6_addr[2 * i + 1]);
+ p = pack_hex_byte(p, *addr++);
+ p = pack_hex_byte(p, *addr++);
if (fmt[0] == 'I' && i != 7)
*p++ = ':';
}
char ip6_addr[sizeof("xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:255.255.255.255")];
if (fmt[0] == 'I' && fmt[2] == 'c')
- ip6_compressed_string(ip6_addr, (const struct in6_addr *)addr);
+ ip6_compressed_string(ip6_addr, addr);
else
- ip6_string(ip6_addr, (const struct in6_addr *)addr, fmt);
+ ip6_string(ip6_addr, addr, fmt);
return string(buf, end, ip6_addr, spec);
}
/proc/sys/vm/mmap_min_addr tunable.
+config MEMORY_FAILURE
+ depends on MMU
+ depends on X86_MCE
+ bool "Enable recovery from hardware memory errors"
+ help
+ Enables code to recover from some memory failures on systems
+ with MCA recovery. This allows a system to continue running
+ even when some of its memory has uncorrected errors. This requires
+ special hardware support and typically ECC memory.
+
+config HWPOISON_INJECT
+ tristate "Poison pages injector"
+ depends on MEMORY_FAILURE && DEBUG_KERNEL
+
config NOMMU_INITIAL_TRIM_EXCESS
int "Turn on mmap() excess space trimming before booting"
depends on !MMU
mmu-y := nommu.o
mmu-$(CONFIG_MMU) := fremap.o highmem.o madvise.o memory.o mincore.o \
mlock.o mmap.o mprotect.o mremap.o msync.o rmap.o \
- vmalloc.o
+ vmalloc.o pagewalk.o
obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
maccess.o page_alloc.o page-writeback.o \
readahead.o swap.o truncate.o vmscan.o shmem.o \
prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
page_isolation.o mm_init.o mmu_context.o \
- pagewalk.o $(mmu-y)
+ $(mmu-y)
obj-y += init-mm.o
obj-$(CONFIG_BOUNCE) += bounce.o
endif
obj-$(CONFIG_QUICKLIST) += quicklist.o
obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
+obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o
+obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o
/*
* Lock ordering:
*
- * ->i_mmap_lock (vmtruncate)
+ * ->i_mmap_lock (truncate_pagecache)
* ->private_lock (__free_pte->__set_page_dirty_buffers)
* ->swap_lock (exclusive_swap_page, others)
* ->mapping->tree_lock
*
* ->task->proc_lock
* ->dcache_lock (proc_pid_lookup)
+ *
+ * (code doesn't rely on that order, so you could switch it around)
+ * ->tasklist_lock (memory_failure, collect_procs_ao)
+ * ->i_mmap_lock
*/
/*
#ifdef CONFIG_SYSCTL
int hugetlb_sysctl_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
struct hstate *h = &default_hstate;
table->data = &tmp;
table->maxlen = sizeof(unsigned long);
- proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
+ proc_doulongvec_minmax(table, write, buffer, length, ppos);
if (write)
h->max_huge_pages = set_max_huge_pages(h, tmp);
}
int hugetlb_treat_movable_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
if (hugepages_treat_as_movable)
htlb_alloc_mask = GFP_HIGHUSER_MOVABLE;
else
}
int hugetlb_overcommit_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
struct hstate *h = &default_hstate;
table->data = &tmp;
table->maxlen = sizeof(unsigned long);
- proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
+ proc_doulongvec_minmax(table, write, buffer, length, ppos);
if (write) {
spin_lock(&hugetlb_lock);
--- /dev/null
+/* Inject a hwpoison memory failure on a arbitary pfn */
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+static struct dentry *hwpoison_dir, *corrupt_pfn;
+
+static int hwpoison_inject(void *data, u64 val)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ printk(KERN_INFO "Injecting memory failure at pfn %Lx\n", val);
+ return __memory_failure(val, 18, 0);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(hwpoison_fops, NULL, hwpoison_inject, "%lli\n");
+
+static void pfn_inject_exit(void)
+{
+ if (hwpoison_dir)
+ debugfs_remove_recursive(hwpoison_dir);
+}
+
+static int pfn_inject_init(void)
+{
+ hwpoison_dir = debugfs_create_dir("hwpoison", NULL);
+ if (hwpoison_dir == NULL)
+ return -ENOMEM;
+ corrupt_pfn = debugfs_create_file("corrupt-pfn", 0600, hwpoison_dir,
+ NULL, &hwpoison_fops);
+ if (corrupt_pfn == NULL) {
+ pfn_inject_exit();
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+module_init(pfn_inject_init);
+module_exit(pfn_inject_exit);
+MODULE_LICENSE("GPL");
#include <linux/slab.h>
#include <linux/rbtree.h>
#include <linux/mmu_notifier.h>
+#include <linux/swap.h>
#include <linux/ksm.h>
#include <asm/tlbflush.h>
static unsigned long ksm_rmap_items;
/* Limit on the number of unswappable pages used */
-static unsigned long ksm_max_kernel_pages = 2000;
+static unsigned long ksm_max_kernel_pages;
/* Number of pages ksmd should scan in one batch */
-static unsigned int ksm_thread_pages_to_scan = 200;
+static unsigned int ksm_thread_pages_to_scan = 100;
/* Milliseconds ksmd should sleep between batches */
static unsigned int ksm_thread_sleep_millisecs = 20;
#define KSM_RUN_STOP 0
#define KSM_RUN_MERGE 1
#define KSM_RUN_UNMERGE 2
-static unsigned int ksm_run = KSM_RUN_MERGE;
+static unsigned int ksm_run = KSM_RUN_STOP;
static DECLARE_WAIT_QUEUE_HEAD(ksm_thread_wait);
static DEFINE_MUTEX(ksm_thread_mutex);
sizeof(struct __struct), __alignof__(struct __struct),\
(__flags), NULL)
+static void __init ksm_init_max_kernel_pages(void)
+{
+ ksm_max_kernel_pages = nr_free_buffer_pages() / 4;
+}
+
static int __init ksm_slab_init(void)
{
rmap_item_cache = KSM_KMEM_CACHE(rmap_item, 0);
struct task_struct *ksm_thread;
int err;
+ ksm_init_max_kernel_pages();
+
err = ksm_slab_init();
if (err)
goto out;
return error;
}
+#ifdef CONFIG_MEMORY_FAILURE
+/*
+ * Error injection support for memory error handling.
+ */
+static int madvise_hwpoison(unsigned long start, unsigned long end)
+{
+ int ret = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ for (; start < end; start += PAGE_SIZE) {
+ struct page *p;
+ int ret = get_user_pages(current, current->mm, start, 1,
+ 0, 0, &p, NULL);
+ if (ret != 1)
+ return ret;
+ printk(KERN_INFO "Injecting memory failure for page %lx at %lx\n",
+ page_to_pfn(p), start);
+ /* Ignore return value for now */
+ __memory_failure(page_to_pfn(p), 0, 1);
+ put_page(p);
+ }
+ return ret;
+}
+#endif
+
static long
madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev,
unsigned long start, unsigned long end, int behavior)
int write;
size_t len;
+#ifdef CONFIG_MEMORY_FAILURE
+ if (behavior == MADV_HWPOISON)
+ return madvise_hwpoison(start, start+len_in);
+#endif
if (!madvise_behavior_valid(behavior))
return error;
#include <linux/rcupdate.h>
#include <linux/limits.h>
#include <linux/mutex.h>
+#include <linux/rbtree.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/spinlock.h>
struct cgroup_subsys mem_cgroup_subsys __read_mostly;
#define MEM_CGROUP_RECLAIM_RETRIES 5
+struct mem_cgroup *root_mem_cgroup __read_mostly;
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
#endif
static DEFINE_MUTEX(memcg_tasklist); /* can be hold under cgroup_mutex */
+#define SOFTLIMIT_EVENTS_THRESH (1000)
/*
* Statistics for memory cgroup.
MEM_CGROUP_STAT_MAPPED_FILE, /* # of pages charged as file rss */
MEM_CGROUP_STAT_PGPGIN_COUNT, /* # of pages paged in */
MEM_CGROUP_STAT_PGPGOUT_COUNT, /* # of pages paged out */
+ MEM_CGROUP_STAT_EVENTS, /* sum of pagein + pageout for internal use */
+ MEM_CGROUP_STAT_SWAPOUT, /* # of pages, swapped out */
MEM_CGROUP_STAT_NSTATS,
};
struct mem_cgroup_stat_cpu cpustat[0];
};
+static inline void
+__mem_cgroup_stat_reset_safe(struct mem_cgroup_stat_cpu *stat,
+ enum mem_cgroup_stat_index idx)
+{
+ stat->count[idx] = 0;
+}
+
+static inline s64
+__mem_cgroup_stat_read_local(struct mem_cgroup_stat_cpu *stat,
+ enum mem_cgroup_stat_index idx)
+{
+ return stat->count[idx];
+}
+
/*
* For accounting under irq disable, no need for increment preempt count.
*/
unsigned long count[NR_LRU_LISTS];
struct zone_reclaim_stat reclaim_stat;
+ struct rb_node tree_node; /* RB tree node */
+ unsigned long long usage_in_excess;/* Set to the value by which */
+ /* the soft limit is exceeded*/
+ bool on_tree;
+ struct mem_cgroup *mem; /* Back pointer, we cannot */
+ /* use container_of */
};
/* Macro for accessing counter */
#define MEM_CGROUP_ZSTAT(mz, idx) ((mz)->count[(idx)])
struct mem_cgroup_per_node *nodeinfo[MAX_NUMNODES];
};
+/*
+ * Cgroups above their limits are maintained in a RB-Tree, independent of
+ * their hierarchy representation
+ */
+
+struct mem_cgroup_tree_per_zone {
+ struct rb_root rb_root;
+ spinlock_t lock;
+};
+
+struct mem_cgroup_tree_per_node {
+ struct mem_cgroup_tree_per_zone rb_tree_per_zone[MAX_NR_ZONES];
+};
+
+struct mem_cgroup_tree {
+ struct mem_cgroup_tree_per_node *rb_tree_per_node[MAX_NUMNODES];
+};
+
+static struct mem_cgroup_tree soft_limit_tree __read_mostly;
+
/*
* The memory controller data structure. The memory controller controls both
* page cache and RSS per cgroup. We would eventually like to provide
struct mem_cgroup_stat stat;
};
+/*
+ * Maximum loops in mem_cgroup_hierarchical_reclaim(), used for soft
+ * limit reclaim to prevent infinite loops, if they ever occur.
+ */
+#define MEM_CGROUP_MAX_RECLAIM_LOOPS (100)
+#define MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS (2)
+
enum charge_type {
MEM_CGROUP_CHARGE_TYPE_CACHE = 0,
MEM_CGROUP_CHARGE_TYPE_MAPPED,
#define PCGF_CACHE (1UL << PCG_CACHE)
#define PCGF_USED (1UL << PCG_USED)
#define PCGF_LOCK (1UL << PCG_LOCK)
-static const unsigned long
-pcg_default_flags[NR_CHARGE_TYPE] = {
- PCGF_CACHE | PCGF_USED | PCGF_LOCK, /* File Cache */
- PCGF_USED | PCGF_LOCK, /* Anon */
- PCGF_CACHE | PCGF_USED | PCGF_LOCK, /* Shmem */
- 0, /* FORCE */
-};
+/* Not used, but added here for completeness */
+#define PCGF_ACCT (1UL << PCG_ACCT)
/* for encoding cft->private value on file */
#define _MEM (0)
#define MEMFILE_TYPE(val) (((val) >> 16) & 0xffff)
#define MEMFILE_ATTR(val) ((val) & 0xffff)
+/*
+ * Reclaim flags for mem_cgroup_hierarchical_reclaim
+ */
+#define MEM_CGROUP_RECLAIM_NOSWAP_BIT 0x0
+#define MEM_CGROUP_RECLAIM_NOSWAP (1 << MEM_CGROUP_RECLAIM_NOSWAP_BIT)
+#define MEM_CGROUP_RECLAIM_SHRINK_BIT 0x1
+#define MEM_CGROUP_RECLAIM_SHRINK (1 << MEM_CGROUP_RECLAIM_SHRINK_BIT)
+#define MEM_CGROUP_RECLAIM_SOFT_BIT 0x2
+#define MEM_CGROUP_RECLAIM_SOFT (1 << MEM_CGROUP_RECLAIM_SOFT_BIT)
+
static void mem_cgroup_get(struct mem_cgroup *mem);
static void mem_cgroup_put(struct mem_cgroup *mem);
static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
+static struct mem_cgroup_per_zone *
+mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
+{
+ return &mem->info.nodeinfo[nid]->zoneinfo[zid];
+}
+
+static struct mem_cgroup_per_zone *
+page_cgroup_zoneinfo(struct page_cgroup *pc)
+{
+ struct mem_cgroup *mem = pc->mem_cgroup;
+ int nid = page_cgroup_nid(pc);
+ int zid = page_cgroup_zid(pc);
+
+ if (!mem)
+ return NULL;
+
+ return mem_cgroup_zoneinfo(mem, nid, zid);
+}
+
+static struct mem_cgroup_tree_per_zone *
+soft_limit_tree_node_zone(int nid, int zid)
+{
+ return &soft_limit_tree.rb_tree_per_node[nid]->rb_tree_per_zone[zid];
+}
+
+static struct mem_cgroup_tree_per_zone *
+soft_limit_tree_from_page(struct page *page)
+{
+ int nid = page_to_nid(page);
+ int zid = page_zonenum(page);
+
+ return &soft_limit_tree.rb_tree_per_node[nid]->rb_tree_per_zone[zid];
+}
+
+static void
+__mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
+ struct mem_cgroup_per_zone *mz,
+ struct mem_cgroup_tree_per_zone *mctz)
+{
+ struct rb_node **p = &mctz->rb_root.rb_node;
+ struct rb_node *parent = NULL;
+ struct mem_cgroup_per_zone *mz_node;
+
+ if (mz->on_tree)
+ return;
+
+ mz->usage_in_excess = res_counter_soft_limit_excess(&mem->res);
+ while (*p) {
+ parent = *p;
+ mz_node = rb_entry(parent, struct mem_cgroup_per_zone,
+ tree_node);
+ if (mz->usage_in_excess < mz_node->usage_in_excess)
+ p = &(*p)->rb_left;
+ /*
+ * We can't avoid mem cgroups that are over their soft
+ * limit by the same amount
+ */
+ else if (mz->usage_in_excess >= mz_node->usage_in_excess)
+ p = &(*p)->rb_right;
+ }
+ rb_link_node(&mz->tree_node, parent, p);
+ rb_insert_color(&mz->tree_node, &mctz->rb_root);
+ mz->on_tree = true;
+}
+
+static void
+__mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+ struct mem_cgroup_per_zone *mz,
+ struct mem_cgroup_tree_per_zone *mctz)
+{
+ if (!mz->on_tree)
+ return;
+ rb_erase(&mz->tree_node, &mctz->rb_root);
+ mz->on_tree = false;
+}
+
+static void
+mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
+ struct mem_cgroup_per_zone *mz,
+ struct mem_cgroup_tree_per_zone *mctz)
+{
+ spin_lock(&mctz->lock);
+ __mem_cgroup_insert_exceeded(mem, mz, mctz);
+ spin_unlock(&mctz->lock);
+}
+
+static void
+mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+ struct mem_cgroup_per_zone *mz,
+ struct mem_cgroup_tree_per_zone *mctz)
+{
+ spin_lock(&mctz->lock);
+ __mem_cgroup_remove_exceeded(mem, mz, mctz);
+ spin_unlock(&mctz->lock);
+}
+
+static bool mem_cgroup_soft_limit_check(struct mem_cgroup *mem)
+{
+ bool ret = false;
+ int cpu;
+ s64 val;
+ struct mem_cgroup_stat_cpu *cpustat;
+
+ cpu = get_cpu();
+ cpustat = &mem->stat.cpustat[cpu];
+ val = __mem_cgroup_stat_read_local(cpustat, MEM_CGROUP_STAT_EVENTS);
+ if (unlikely(val > SOFTLIMIT_EVENTS_THRESH)) {
+ __mem_cgroup_stat_reset_safe(cpustat, MEM_CGROUP_STAT_EVENTS);
+ ret = true;
+ }
+ put_cpu();
+ return ret;
+}
+
+static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
+{
+ unsigned long long prev_usage_in_excess, new_usage_in_excess;
+ bool updated_tree = false;
+ struct mem_cgroup_per_zone *mz;
+ struct mem_cgroup_tree_per_zone *mctz;
+
+ mz = mem_cgroup_zoneinfo(mem, page_to_nid(page), page_zonenum(page));
+ mctz = soft_limit_tree_from_page(page);
+
+ /*
+ * We do updates in lazy mode, mem's are removed
+ * lazily from the per-zone, per-node rb tree
+ */
+ prev_usage_in_excess = mz->usage_in_excess;
+
+ new_usage_in_excess = res_counter_soft_limit_excess(&mem->res);
+ if (prev_usage_in_excess) {
+ mem_cgroup_remove_exceeded(mem, mz, mctz);
+ updated_tree = true;
+ }
+ if (!new_usage_in_excess)
+ goto done;
+ mem_cgroup_insert_exceeded(mem, mz, mctz);
+
+done:
+ if (updated_tree) {
+ spin_lock(&mctz->lock);
+ mz->usage_in_excess = new_usage_in_excess;
+ spin_unlock(&mctz->lock);
+ }
+}
+
+static void mem_cgroup_remove_from_trees(struct mem_cgroup *mem)
+{
+ int node, zone;
+ struct mem_cgroup_per_zone *mz;
+ struct mem_cgroup_tree_per_zone *mctz;
+
+ for_each_node_state(node, N_POSSIBLE) {
+ for (zone = 0; zone < MAX_NR_ZONES; zone++) {
+ mz = mem_cgroup_zoneinfo(mem, node, zone);
+ mctz = soft_limit_tree_node_zone(node, zone);
+ mem_cgroup_remove_exceeded(mem, mz, mctz);
+ }
+ }
+}
+
+static inline unsigned long mem_cgroup_get_excess(struct mem_cgroup *mem)
+{
+ return res_counter_soft_limit_excess(&mem->res) >> PAGE_SHIFT;
+}
+
+static struct mem_cgroup_per_zone *
+__mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
+{
+ struct rb_node *rightmost = NULL;
+ struct mem_cgroup_per_zone *mz = NULL;
+
+retry:
+ rightmost = rb_last(&mctz->rb_root);
+ if (!rightmost)
+ goto done; /* Nothing to reclaim from */
+
+ mz = rb_entry(rightmost, struct mem_cgroup_per_zone, tree_node);
+ /*
+ * Remove the node now but someone else can add it back,
+ * we will to add it back at the end of reclaim to its correct
+ * position in the tree.
+ */
+ __mem_cgroup_remove_exceeded(mz->mem, mz, mctz);
+ if (!res_counter_soft_limit_excess(&mz->mem->res) ||
+ !css_tryget(&mz->mem->css))
+ goto retry;
+done:
+ return mz;
+}
+
+static struct mem_cgroup_per_zone *
+mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
+{
+ struct mem_cgroup_per_zone *mz;
+
+ spin_lock(&mctz->lock);
+ mz = __mem_cgroup_largest_soft_limit_node(mctz);
+ spin_unlock(&mctz->lock);
+ return mz;
+}
+
+static void mem_cgroup_swap_statistics(struct mem_cgroup *mem,
+ bool charge)
+{
+ int val = (charge) ? 1 : -1;
+ struct mem_cgroup_stat *stat = &mem->stat;
+ struct mem_cgroup_stat_cpu *cpustat;
+ int cpu = get_cpu();
+
+ cpustat = &stat->cpustat[cpu];
+ __mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_SWAPOUT, val);
+ put_cpu();
+}
+
static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
struct page_cgroup *pc,
bool charge)
{
- int val = (charge)? 1 : -1;
+ int val = (charge) ? 1 : -1;
struct mem_cgroup_stat *stat = &mem->stat;
struct mem_cgroup_stat_cpu *cpustat;
int cpu = get_cpu();
else
__mem_cgroup_stat_add_safe(cpustat,
MEM_CGROUP_STAT_PGPGOUT_COUNT, 1);
+ __mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_EVENTS, 1);
put_cpu();
}
-static struct mem_cgroup_per_zone *
-mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
-{
- return &mem->info.nodeinfo[nid]->zoneinfo[zid];
-}
-
-static struct mem_cgroup_per_zone *
-page_cgroup_zoneinfo(struct page_cgroup *pc)
-{
- struct mem_cgroup *mem = pc->mem_cgroup;
- int nid = page_cgroup_nid(pc);
- int zid = page_cgroup_zid(pc);
-
- if (!mem)
- return NULL;
-
- return mem_cgroup_zoneinfo(mem, nid, zid);
-}
-
static unsigned long mem_cgroup_get_local_zonestat(struct mem_cgroup *mem,
enum lru_list idx)
{
return ret;
}
+static inline bool mem_cgroup_is_root(struct mem_cgroup *mem)
+{
+ return (mem == root_mem_cgroup);
+}
+
/*
* Following LRU functions are allowed to be used without PCG_LOCK.
* Operations are called by routine of global LRU independently from memcg.
void mem_cgroup_del_lru_list(struct page *page, enum lru_list lru)
{
struct page_cgroup *pc;
- struct mem_cgroup *mem;
struct mem_cgroup_per_zone *mz;
if (mem_cgroup_disabled())
return;
pc = lookup_page_cgroup(page);
/* can happen while we handle swapcache. */
- if (list_empty(&pc->lru) || !pc->mem_cgroup)
+ if (!TestClearPageCgroupAcctLRU(pc))
return;
+ VM_BUG_ON(!pc->mem_cgroup);
/*
* We don't check PCG_USED bit. It's cleared when the "page" is finally
* removed from global LRU.
*/
mz = page_cgroup_zoneinfo(pc);
- mem = pc->mem_cgroup;
MEM_CGROUP_ZSTAT(mz, lru) -= 1;
+ if (mem_cgroup_is_root(pc->mem_cgroup))
+ return;
+ VM_BUG_ON(list_empty(&pc->lru));
list_del_init(&pc->lru);
return;
}
* For making pc->mem_cgroup visible, insert smp_rmb() here.
*/
smp_rmb();
- /* unused page is not rotated. */
- if (!PageCgroupUsed(pc))
+ /* unused or root page is not rotated. */
+ if (!PageCgroupUsed(pc) || mem_cgroup_is_root(pc->mem_cgroup))
return;
mz = page_cgroup_zoneinfo(pc);
list_move(&pc->lru, &mz->lists[lru]);
if (mem_cgroup_disabled())
return;
pc = lookup_page_cgroup(page);
+ VM_BUG_ON(PageCgroupAcctLRU(pc));
/*
* Used bit is set without atomic ops but after smp_wmb().
* For making pc->mem_cgroup visible, insert smp_rmb() here.
mz = page_cgroup_zoneinfo(pc);
MEM_CGROUP_ZSTAT(mz, lru) += 1;
+ SetPageCgroupAcctLRU(pc);
+ if (mem_cgroup_is_root(pc->mem_cgroup))
+ return;
list_add(&pc->lru, &mz->lists[lru]);
}
spin_lock_irqsave(&zone->lru_lock, flags);
/* link when the page is linked to LRU but page_cgroup isn't */
- if (PageLRU(page) && list_empty(&pc->lru))
+ if (PageLRU(page) && !PageCgroupAcctLRU(pc))
mem_cgroup_add_lru_list(page, page_lru(page));
spin_unlock_irqrestore(&zone->lru_lock, flags);
}
* If shrink==true, for avoiding to free too much, this returns immedieately.
*/
static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
- gfp_t gfp_mask, bool noswap, bool shrink)
+ struct zone *zone,
+ gfp_t gfp_mask,
+ unsigned long reclaim_options)
{
struct mem_cgroup *victim;
int ret, total = 0;
int loop = 0;
+ bool noswap = reclaim_options & MEM_CGROUP_RECLAIM_NOSWAP;
+ bool shrink = reclaim_options & MEM_CGROUP_RECLAIM_SHRINK;
+ bool check_soft = reclaim_options & MEM_CGROUP_RECLAIM_SOFT;
+ unsigned long excess = mem_cgroup_get_excess(root_mem);
/* If memsw_is_minimum==1, swap-out is of-no-use. */
if (root_mem->memsw_is_minimum)
noswap = true;
- while (loop < 2) {
+ while (1) {
victim = mem_cgroup_select_victim(root_mem);
- if (victim == root_mem)
+ if (victim == root_mem) {
loop++;
+ if (loop >= 2) {
+ /*
+ * If we have not been able to reclaim
+ * anything, it might because there are
+ * no reclaimable pages under this hierarchy
+ */
+ if (!check_soft || !total) {
+ css_put(&victim->css);
+ break;
+ }
+ /*
+ * We want to do more targetted reclaim.
+ * excess >> 2 is not to excessive so as to
+ * reclaim too much, nor too less that we keep
+ * coming back to reclaim from this cgroup
+ */
+ if (total >= (excess >> 2) ||
+ (loop > MEM_CGROUP_MAX_RECLAIM_LOOPS)) {
+ css_put(&victim->css);
+ break;
+ }
+ }
+ }
if (!mem_cgroup_local_usage(&victim->stat)) {
/* this cgroup's local usage == 0 */
css_put(&victim->css);
continue;
}
/* we use swappiness of local cgroup */
- ret = try_to_free_mem_cgroup_pages(victim, gfp_mask, noswap,
- get_swappiness(victim));
+ if (check_soft)
+ ret = mem_cgroup_shrink_node_zone(victim, gfp_mask,
+ noswap, get_swappiness(victim), zone,
+ zone->zone_pgdat->node_id);
+ else
+ ret = try_to_free_mem_cgroup_pages(victim, gfp_mask,
+ noswap, get_swappiness(victim));
css_put(&victim->css);
/*
* At shrinking usage, we can't check we should stop here or
if (shrink)
return ret;
total += ret;
- if (mem_cgroup_check_under_limit(root_mem))
+ if (check_soft) {
+ if (res_counter_check_under_soft_limit(&root_mem->res))
+ return total;
+ } else if (mem_cgroup_check_under_limit(root_mem))
return 1 + total;
}
return total;
*/
static int __mem_cgroup_try_charge(struct mm_struct *mm,
gfp_t gfp_mask, struct mem_cgroup **memcg,
- bool oom)
+ bool oom, struct page *page)
{
- struct mem_cgroup *mem, *mem_over_limit;
+ struct mem_cgroup *mem, *mem_over_limit, *mem_over_soft_limit;
int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
- struct res_counter *fail_res;
+ struct res_counter *fail_res, *soft_fail_res = NULL;
if (unlikely(test_thread_flag(TIF_MEMDIE))) {
/* Don't account this! */
VM_BUG_ON(css_is_removed(&mem->css));
while (1) {
- int ret;
- bool noswap = false;
+ int ret = 0;
+ unsigned long flags = 0;
- ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res);
+ if (mem_cgroup_is_root(mem))
+ goto done;
+ ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res,
+ &soft_fail_res);
if (likely(!ret)) {
if (!do_swap_account)
break;
ret = res_counter_charge(&mem->memsw, PAGE_SIZE,
- &fail_res);
+ &fail_res, NULL);
if (likely(!ret))
break;
/* mem+swap counter fails */
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- noswap = true;
+ res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+ flags |= MEM_CGROUP_RECLAIM_NOSWAP;
mem_over_limit = mem_cgroup_from_res_counter(fail_res,
memsw);
} else
if (!(gfp_mask & __GFP_WAIT))
goto nomem;
- ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, gfp_mask,
- noswap, false);
+ ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, NULL,
+ gfp_mask, flags);
if (ret)
continue;
goto nomem;
}
}
+ /*
+ * Insert just the ancestor, we should trickle down to the correct
+ * cgroup for reclaim, since the other nodes will be below their
+ * soft limit
+ */
+ if (soft_fail_res) {
+ mem_over_soft_limit =
+ mem_cgroup_from_res_counter(soft_fail_res, res);
+ if (mem_cgroup_soft_limit_check(mem_over_soft_limit))
+ mem_cgroup_update_tree(mem_over_soft_limit, page);
+ }
+done:
return 0;
nomem:
css_put(&mem->css);
return -ENOMEM;
}
-
/*
* A helper function to get mem_cgroup from ID. must be called under
* rcu_read_lock(). The caller must check css_is_removed() or some if
lock_page_cgroup(pc);
if (unlikely(PageCgroupUsed(pc))) {
unlock_page_cgroup(pc);
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- if (do_swap_account)
- res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(mem)) {
+ res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+ if (do_swap_account)
+ res_counter_uncharge(&mem->memsw, PAGE_SIZE,
+ NULL);
+ }
css_put(&mem->css);
return;
}
+
pc->mem_cgroup = mem;
+ /*
+ * We access a page_cgroup asynchronously without lock_page_cgroup().
+ * Especially when a page_cgroup is taken from a page, pc->mem_cgroup
+ * is accessed after testing USED bit. To make pc->mem_cgroup visible
+ * before USED bit, we need memory barrier here.
+ * See mem_cgroup_add_lru_list(), etc.
+ */
smp_wmb();
- pc->flags = pcg_default_flags[ctype];
+ switch (ctype) {
+ case MEM_CGROUP_CHARGE_TYPE_CACHE:
+ case MEM_CGROUP_CHARGE_TYPE_SHMEM:
+ SetPageCgroupCache(pc);
+ SetPageCgroupUsed(pc);
+ break;
+ case MEM_CGROUP_CHARGE_TYPE_MAPPED:
+ ClearPageCgroupCache(pc);
+ SetPageCgroupUsed(pc);
+ break;
+ default:
+ break;
+ }
mem_cgroup_charge_statistics(mem, pc, true);
if (pc->mem_cgroup != from)
goto out;
- res_counter_uncharge(&from->res, PAGE_SIZE);
+ if (!mem_cgroup_is_root(from))
+ res_counter_uncharge(&from->res, PAGE_SIZE, NULL);
mem_cgroup_charge_statistics(from, pc, false);
page = pc->page;
1);
}
- if (do_swap_account)
- res_counter_uncharge(&from->memsw, PAGE_SIZE);
+ if (do_swap_account && !mem_cgroup_is_root(from))
+ res_counter_uncharge(&from->memsw, PAGE_SIZE, NULL);
css_put(&from->css);
css_get(&to->css);
parent = mem_cgroup_from_cont(pcg);
- ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false);
+ ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, page);
if (ret || !parent)
return ret;
/* drop extra refcnt by try_charge() */
css_put(&parent->css);
/* uncharge if move fails */
- res_counter_uncharge(&parent->res, PAGE_SIZE);
- if (do_swap_account)
- res_counter_uncharge(&parent->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(parent)) {
+ res_counter_uncharge(&parent->res, PAGE_SIZE, NULL);
+ if (do_swap_account)
+ res_counter_uncharge(&parent->memsw, PAGE_SIZE, NULL);
+ }
return ret;
}
prefetchw(pc);
mem = memcg;
- ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true);
+ ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true, page);
if (ret || !mem)
return ret;
if (!mem)
goto charge_cur_mm;
*ptr = mem;
- ret = __mem_cgroup_try_charge(NULL, mask, ptr, true);
+ ret = __mem_cgroup_try_charge(NULL, mask, ptr, true, page);
/* drop extra refcnt from tryget */
css_put(&mem->css);
return ret;
charge_cur_mm:
if (unlikely(!mm))
mm = &init_mm;
- return __mem_cgroup_try_charge(mm, mask, ptr, true);
+ return __mem_cgroup_try_charge(mm, mask, ptr, true, page);
}
static void
* This recorded memcg can be obsolete one. So, avoid
* calling css_tryget
*/
- res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(memcg))
+ res_counter_uncharge(&memcg->memsw, PAGE_SIZE,
+ NULL);
+ mem_cgroup_swap_statistics(memcg, false);
mem_cgroup_put(memcg);
}
rcu_read_unlock();
return;
if (!mem)
return;
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- if (do_swap_account)
- res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(mem)) {
+ res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+ if (do_swap_account)
+ res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL);
+ }
css_put(&mem->css);
}
struct page_cgroup *pc;
struct mem_cgroup *mem = NULL;
struct mem_cgroup_per_zone *mz;
+ bool soft_limit_excess = false;
if (mem_cgroup_disabled())
return NULL;
break;
}
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- if (do_swap_account && (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT))
- res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(mem)) {
+ res_counter_uncharge(&mem->res, PAGE_SIZE, &soft_limit_excess);
+ if (do_swap_account &&
+ (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT))
+ res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL);
+ }
+ if (ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
+ mem_cgroup_swap_statistics(mem, true);
mem_cgroup_charge_statistics(mem, pc, false);
ClearPageCgroupUsed(pc);
mz = page_cgroup_zoneinfo(pc);
unlock_page_cgroup(pc);
+ if (soft_limit_excess && mem_cgroup_soft_limit_check(mem))
+ mem_cgroup_update_tree(mem, page);
/* at swapout, this memcg will be accessed to record to swap */
if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
css_put(&mem->css);
* We uncharge this because swap is freed.
* This memcg can be obsolete one. We avoid calling css_tryget
*/
- res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(memcg))
+ res_counter_uncharge(&memcg->memsw, PAGE_SIZE, NULL);
+ mem_cgroup_swap_statistics(memcg, false);
mem_cgroup_put(memcg);
}
rcu_read_unlock();
unlock_page_cgroup(pc);
if (mem) {
- ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
+ ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false,
+ page);
css_put(&mem->css);
}
*ptr = mem;
if (!ret)
break;
- progress = mem_cgroup_hierarchical_reclaim(memcg, GFP_KERNEL,
- false, true);
+ progress = mem_cgroup_hierarchical_reclaim(memcg, NULL,
+ GFP_KERNEL,
+ MEM_CGROUP_RECLAIM_SHRINK);
curusage = res_counter_read_u64(&memcg->res, RES_USAGE);
/* Usage is reduced ? */
if (curusage >= oldusage)
if (!ret)
break;
- mem_cgroup_hierarchical_reclaim(memcg, GFP_KERNEL, true, true);
+ mem_cgroup_hierarchical_reclaim(memcg, NULL, GFP_KERNEL,
+ MEM_CGROUP_RECLAIM_NOSWAP |
+ MEM_CGROUP_RECLAIM_SHRINK);
curusage = res_counter_read_u64(&memcg->memsw, RES_USAGE);
/* Usage is reduced ? */
if (curusage >= oldusage)
return ret;
}
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+ gfp_t gfp_mask, int nid,
+ int zid)
+{
+ unsigned long nr_reclaimed = 0;
+ struct mem_cgroup_per_zone *mz, *next_mz = NULL;
+ unsigned long reclaimed;
+ int loop = 0;
+ struct mem_cgroup_tree_per_zone *mctz;
+
+ if (order > 0)
+ return 0;
+
+ mctz = soft_limit_tree_node_zone(nid, zid);
+ /*
+ * This loop can run a while, specially if mem_cgroup's continuously
+ * keep exceeding their soft limit and putting the system under
+ * pressure
+ */
+ do {
+ if (next_mz)
+ mz = next_mz;
+ else
+ mz = mem_cgroup_largest_soft_limit_node(mctz);
+ if (!mz)
+ break;
+
+ reclaimed = mem_cgroup_hierarchical_reclaim(mz->mem, zone,
+ gfp_mask,
+ MEM_CGROUP_RECLAIM_SOFT);
+ nr_reclaimed += reclaimed;
+ spin_lock(&mctz->lock);
+
+ /*
+ * If we failed to reclaim anything from this memory cgroup
+ * it is time to move on to the next cgroup
+ */
+ next_mz = NULL;
+ if (!reclaimed) {
+ do {
+ /*
+ * Loop until we find yet another one.
+ *
+ * By the time we get the soft_limit lock
+ * again, someone might have aded the
+ * group back on the RB tree. Iterate to
+ * make sure we get a different mem.
+ * mem_cgroup_largest_soft_limit_node returns
+ * NULL if no other cgroup is present on
+ * the tree
+ */
+ next_mz =
+ __mem_cgroup_largest_soft_limit_node(mctz);
+ if (next_mz == mz) {
+ css_put(&next_mz->mem->css);
+ next_mz = NULL;
+ } else /* next_mz == NULL or other memcg */
+ break;
+ } while (1);
+ }
+ mz->usage_in_excess =
+ res_counter_soft_limit_excess(&mz->mem->res);
+ __mem_cgroup_remove_exceeded(mz->mem, mz, mctz);
+ /*
+ * One school of thought says that we should not add
+ * back the node to the tree if reclaim returns 0.
+ * But our reclaim could return 0, simply because due
+ * to priority we are exposing a smaller subset of
+ * memory to reclaim from. Consider this as a longer
+ * term TODO.
+ */
+ if (mz->usage_in_excess)
+ __mem_cgroup_insert_exceeded(mz->mem, mz, mctz);
+ spin_unlock(&mctz->lock);
+ css_put(&mz->mem->css);
+ loop++;
+ /*
+ * Could not reclaim anything and there are no more
+ * mem cgroups to try or we seem to be looping without
+ * reclaiming anything.
+ */
+ if (!nr_reclaimed &&
+ (next_mz == NULL ||
+ loop > MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS))
+ break;
+ } while (!nr_reclaimed);
+ if (next_mz)
+ css_put(&next_mz->mem->css);
+ return nr_reclaimed;
+}
+
/*
* This routine traverse page_cgroup in given list and drop them all.
* *And* this routine doesn't reclaim page itself, just removes page_cgroup.
return retval;
}
+struct mem_cgroup_idx_data {
+ s64 val;
+ enum mem_cgroup_stat_index idx;
+};
+
+static int
+mem_cgroup_get_idx_stat(struct mem_cgroup *mem, void *data)
+{
+ struct mem_cgroup_idx_data *d = data;
+ d->val += mem_cgroup_read_stat(&mem->stat, d->idx);
+ return 0;
+}
+
+static void
+mem_cgroup_get_recursive_idx_stat(struct mem_cgroup *mem,
+ enum mem_cgroup_stat_index idx, s64 *val)
+{
+ struct mem_cgroup_idx_data d;
+ d.idx = idx;
+ d.val = 0;
+ mem_cgroup_walk_tree(mem, &d, mem_cgroup_get_idx_stat);
+ *val = d.val;
+}
+
static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
{
struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
- u64 val = 0;
+ u64 idx_val, val;
int type, name;
type = MEMFILE_TYPE(cft->private);
name = MEMFILE_ATTR(cft->private);
switch (type) {
case _MEM:
- val = res_counter_read_u64(&mem->res, name);
+ if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_CACHE, &idx_val);
+ val = idx_val;
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_RSS, &idx_val);
+ val += idx_val;
+ val <<= PAGE_SHIFT;
+ } else
+ val = res_counter_read_u64(&mem->res, name);
break;
case _MEMSWAP:
- val = res_counter_read_u64(&mem->memsw, name);
+ if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_CACHE, &idx_val);
+ val = idx_val;
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_RSS, &idx_val);
+ val += idx_val;
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_SWAPOUT, &idx_val);
+ val <<= PAGE_SHIFT;
+ } else
+ val = res_counter_read_u64(&mem->memsw, name);
break;
default:
BUG();
name = MEMFILE_ATTR(cft->private);
switch (name) {
case RES_LIMIT:
+ if (mem_cgroup_is_root(memcg)) { /* Can't set limit on root */
+ ret = -EINVAL;
+ break;
+ }
/* This function does all necessary parse...reuse it */
ret = res_counter_memparse_write_strategy(buffer, &val);
if (ret)
else
ret = mem_cgroup_resize_memsw_limit(memcg, val);
break;
+ case RES_SOFT_LIMIT:
+ ret = res_counter_memparse_write_strategy(buffer, &val);
+ if (ret)
+ break;
+ /*
+ * For memsw, soft limits are hard to implement in terms
+ * of semantics, for now, we support soft limits for
+ * control without swap
+ */
+ if (type == _MEM)
+ ret = res_counter_set_soft_limit(&memcg->res, val);
+ else
+ ret = -EINVAL;
+ break;
default:
ret = -EINVAL; /* should be BUG() ? */
break;
res_counter_reset_failcnt(&mem->memsw);
break;
}
+
return 0;
}
MCS_MAPPED_FILE,
MCS_PGPGIN,
MCS_PGPGOUT,
+ MCS_SWAP,
MCS_INACTIVE_ANON,
MCS_ACTIVE_ANON,
MCS_INACTIVE_FILE,
{"mapped_file", "total_mapped_file"},
{"pgpgin", "total_pgpgin"},
{"pgpgout", "total_pgpgout"},
+ {"swap", "total_swap"},
{"inactive_anon", "total_inactive_anon"},
{"active_anon", "total_active_anon"},
{"inactive_file", "total_inactive_file"},
s->stat[MCS_PGPGIN] += val;
val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGOUT_COUNT);
s->stat[MCS_PGPGOUT] += val;
+ if (do_swap_account) {
+ val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_SWAPOUT);
+ s->stat[MCS_SWAP] += val * PAGE_SIZE;
+ }
/* per zone stat */
val = mem_cgroup_get_local_zonestat(mem, LRU_INACTIVE_ANON);
memset(&mystat, 0, sizeof(mystat));
mem_cgroup_get_local_stat(mem_cont, &mystat);
- for (i = 0; i < NR_MCS_STAT; i++)
+ for (i = 0; i < NR_MCS_STAT; i++) {
+ if (i == MCS_SWAP && !do_swap_account)
+ continue;
cb->fill(cb, memcg_stat_strings[i].local_name, mystat.stat[i]);
+ }
/* Hierarchical information */
{
memset(&mystat, 0, sizeof(mystat));
mem_cgroup_get_total_stat(mem_cont, &mystat);
- for (i = 0; i < NR_MCS_STAT; i++)
+ for (i = 0; i < NR_MCS_STAT; i++) {
+ if (i == MCS_SWAP && !do_swap_account)
+ continue;
cb->fill(cb, memcg_stat_strings[i].total_name, mystat.stat[i]);
-
+ }
#ifdef CONFIG_DEBUG_VM
cb->fill(cb, "inactive_ratio", calc_inactive_ratio(mem_cont, NULL));
.write_string = mem_cgroup_write,
.read_u64 = mem_cgroup_read,
},
+ {
+ .name = "soft_limit_in_bytes",
+ .private = MEMFILE_PRIVATE(_MEM, RES_SOFT_LIMIT),
+ .write_string = mem_cgroup_write,
+ .read_u64 = mem_cgroup_read,
+ },
{
.name = "failcnt",
.private = MEMFILE_PRIVATE(_MEM, RES_FAILCNT),
mz = &pn->zoneinfo[zone];
for_each_lru(l)
INIT_LIST_HEAD(&mz->lists[l]);
+ mz->usage_in_excess = 0;
+ mz->on_tree = false;
+ mz->mem = mem;
}
return 0;
}
{
int node;
+ mem_cgroup_remove_from_trees(mem);
free_css_id(&mem_cgroup_subsys, &mem->css);
for_each_node_state(node, N_POSSIBLE)
}
#endif
+static int mem_cgroup_soft_limit_tree_init(void)
+{
+ struct mem_cgroup_tree_per_node *rtpn;
+ struct mem_cgroup_tree_per_zone *rtpz;
+ int tmp, node, zone;
+
+ for_each_node_state(node, N_POSSIBLE) {
+ tmp = node;
+ if (!node_state(node, N_NORMAL_MEMORY))
+ tmp = -1;
+ rtpn = kzalloc_node(sizeof(*rtpn), GFP_KERNEL, tmp);
+ if (!rtpn)
+ return 1;
+
+ soft_limit_tree.rb_tree_per_node[node] = rtpn;
+
+ for (zone = 0; zone < MAX_NR_ZONES; zone++) {
+ rtpz = &rtpn->rb_tree_per_zone[zone];
+ rtpz->rb_root = RB_ROOT;
+ spin_lock_init(&rtpz->lock);
+ }
+ }
+ return 0;
+}
+
static struct cgroup_subsys_state * __ref
mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
{
for_each_node_state(node, N_POSSIBLE)
if (alloc_mem_cgroup_per_zone_info(mem, node))
goto free_out;
+
/* root ? */
if (cont->parent == NULL) {
enable_swap_cgroup();
parent = NULL;
+ root_mem_cgroup = mem;
+ if (mem_cgroup_soft_limit_tree_init())
+ goto free_out;
+
} else {
parent = mem_cgroup_from_cont(cont->parent);
mem->use_hierarchy = parent->use_hierarchy;
return &mem->css;
free_out:
__mem_cgroup_free(mem);
+ root_mem_cgroup = NULL;
return ERR_PTR(error);
}
static void mem_cgroup_move_task(struct cgroup_subsys *ss,
struct cgroup *cont,
struct cgroup *old_cont,
- struct task_struct *p)
+ struct task_struct *p,
+ bool threadgroup)
{
mutex_lock(&memcg_tasklist);
/*
--- /dev/null
+/*
+ * Copyright (C) 2008, 2009 Intel Corporation
+ * Authors: Andi Kleen, Fengguang Wu
+ *
+ * This software may be redistributed and/or modified under the terms of
+ * the GNU General Public License ("GPL") version 2 only as published by the
+ * Free Software Foundation.
+ *
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * The operation to map back from RMAP chains to processes has to walk
+ * the complete process list and has non linear complexity with the number
+ * mappings. In short it can be quite slow. But since memory corruptions
+ * are rare we hope to get away with this.
+ */
+
+/*
+ * Notebook:
+ * - hugetlb needs more code
+ * - kcore/oldmem/vmcore/mem/kmem check for hwpoison pages
+ * - pass bad pages to kdump next kernel
+ */
+#define DEBUG 1 /* remove me in 2.6.34 */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/rmap.h>
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+#include <linux/backing-dev.h>
+#include "internal.h"
+
+int sysctl_memory_failure_early_kill __read_mostly = 0;
+
+int sysctl_memory_failure_recovery __read_mostly = 1;
+
+atomic_long_t mce_bad_pages __read_mostly = ATOMIC_LONG_INIT(0);
+
+/*
+ * Send all the processes who have the page mapped an ``action optional''
+ * signal.
+ */
+static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
+ unsigned long pfn)
+{
+ struct siginfo si;
+ int ret;
+
+ printk(KERN_ERR
+ "MCE %#lx: Killing %s:%d early due to hardware memory corruption\n",
+ pfn, t->comm, t->pid);
+ si.si_signo = SIGBUS;
+ si.si_errno = 0;
+ si.si_code = BUS_MCEERR_AO;
+ si.si_addr = (void *)addr;
+#ifdef __ARCH_SI_TRAPNO
+ si.si_trapno = trapno;
+#endif
+ si.si_addr_lsb = PAGE_SHIFT;
+ /*
+ * Don't use force here, it's convenient if the signal
+ * can be temporarily blocked.
+ * This could cause a loop when the user sets SIGBUS
+ * to SIG_IGN, but hopefully noone will do that?
+ */
+ ret = send_sig_info(SIGBUS, &si, t); /* synchronous? */
+ if (ret < 0)
+ printk(KERN_INFO "MCE: Error sending signal to %s:%d: %d\n",
+ t->comm, t->pid, ret);
+ return ret;
+}
+
+/*
+ * Kill all processes that have a poisoned page mapped and then isolate
+ * the page.
+ *
+ * General strategy:
+ * Find all processes having the page mapped and kill them.
+ * But we keep a page reference around so that the page is not
+ * actually freed yet.
+ * Then stash the page away
+ *
+ * There's no convenient way to get back to mapped processes
+ * from the VMAs. So do a brute-force search over all
+ * running processes.
+ *
+ * Remember that machine checks are not common (or rather
+ * if they are common you have other problems), so this shouldn't
+ * be a performance issue.
+ *
+ * Also there are some races possible while we get from the
+ * error detection to actually handle it.
+ */
+
+struct to_kill {
+ struct list_head nd;
+ struct task_struct *tsk;
+ unsigned long addr;
+ unsigned addr_valid:1;
+};
+
+/*
+ * Failure handling: if we can't find or can't kill a process there's
+ * not much we can do. We just print a message and ignore otherwise.
+ */
+
+/*
+ * Schedule a process for later kill.
+ * Uses GFP_ATOMIC allocations to avoid potential recursions in the VM.
+ * TBD would GFP_NOIO be enough?
+ */
+static void add_to_kill(struct task_struct *tsk, struct page *p,
+ struct vm_area_struct *vma,
+ struct list_head *to_kill,
+ struct to_kill **tkc)
+{
+ struct to_kill *tk;
+
+ if (*tkc) {
+ tk = *tkc;
+ *tkc = NULL;
+ } else {
+ tk = kmalloc(sizeof(struct to_kill), GFP_ATOMIC);
+ if (!tk) {
+ printk(KERN_ERR
+ "MCE: Out of memory while machine check handling\n");
+ return;
+ }
+ }
+ tk->addr = page_address_in_vma(p, vma);
+ tk->addr_valid = 1;
+
+ /*
+ * In theory we don't have to kill when the page was
+ * munmaped. But it could be also a mremap. Since that's
+ * likely very rare kill anyways just out of paranoia, but use
+ * a SIGKILL because the error is not contained anymore.
+ */
+ if (tk->addr == -EFAULT) {
+ pr_debug("MCE: Unable to find user space address %lx in %s\n",
+ page_to_pfn(p), tsk->comm);
+ tk->addr_valid = 0;
+ }
+ get_task_struct(tsk);
+ tk->tsk = tsk;
+ list_add_tail(&tk->nd, to_kill);
+}
+
+/*
+ * Kill the processes that have been collected earlier.
+ *
+ * Only do anything when DOIT is set, otherwise just free the list
+ * (this is used for clean pages which do not need killing)
+ * Also when FAIL is set do a force kill because something went
+ * wrong earlier.
+ */
+static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno,
+ int fail, unsigned long pfn)
+{
+ struct to_kill *tk, *next;
+
+ list_for_each_entry_safe (tk, next, to_kill, nd) {
+ if (doit) {
+ /*
+ * In case something went wrong with munmaping
+ * make sure the process doesn't catch the
+ * signal and then access the memory. Just kill it.
+ * the signal handlers
+ */
+ if (fail || tk->addr_valid == 0) {
+ printk(KERN_ERR
+ "MCE %#lx: forcibly killing %s:%d because of failure to unmap corrupted page\n",
+ pfn, tk->tsk->comm, tk->tsk->pid);
+ force_sig(SIGKILL, tk->tsk);
+ }
+
+ /*
+ * In theory the process could have mapped
+ * something else on the address in-between. We could
+ * check for that, but we need to tell the
+ * process anyways.
+ */
+ else if (kill_proc_ao(tk->tsk, tk->addr, trapno,
+ pfn) < 0)
+ printk(KERN_ERR
+ "MCE %#lx: Cannot send advisory machine check signal to %s:%d\n",
+ pfn, tk->tsk->comm, tk->tsk->pid);
+ }
+ put_task_struct(tk->tsk);
+ kfree(tk);
+ }
+}
+
+static int task_early_kill(struct task_struct *tsk)
+{
+ if (!tsk->mm)
+ return 0;
+ if (tsk->flags & PF_MCE_PROCESS)
+ return !!(tsk->flags & PF_MCE_EARLY);
+ return sysctl_memory_failure_early_kill;
+}
+
+/*
+ * Collect processes when the error hit an anonymous page.
+ */
+static void collect_procs_anon(struct page *page, struct list_head *to_kill,
+ struct to_kill **tkc)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct anon_vma *av;
+
+ read_lock(&tasklist_lock);
+ av = page_lock_anon_vma(page);
+ if (av == NULL) /* Not actually mapped anymore */
+ goto out;
+ for_each_process (tsk) {
+ if (!task_early_kill(tsk))
+ continue;
+ list_for_each_entry (vma, &av->head, anon_vma_node) {
+ if (!page_mapped_in_vma(page, vma))
+ continue;
+ if (vma->vm_mm == tsk->mm)
+ add_to_kill(tsk, page, vma, to_kill, tkc);
+ }
+ }
+ page_unlock_anon_vma(av);
+out:
+ read_unlock(&tasklist_lock);
+}
+
+/*
+ * Collect processes when the error hit a file mapped page.
+ */
+static void collect_procs_file(struct page *page, struct list_head *to_kill,
+ struct to_kill **tkc)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct prio_tree_iter iter;
+ struct address_space *mapping = page->mapping;
+
+ /*
+ * A note on the locking order between the two locks.
+ * We don't rely on this particular order.
+ * If you have some other code that needs a different order
+ * feel free to switch them around. Or add a reverse link
+ * from mm_struct to task_struct, then this could be all
+ * done without taking tasklist_lock and looping over all tasks.
+ */
+
+ read_lock(&tasklist_lock);
+ spin_lock(&mapping->i_mmap_lock);
+ for_each_process(tsk) {
+ pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+
+ if (!task_early_kill(tsk))
+ continue;
+
+ vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff,
+ pgoff) {
+ /*
+ * Send early kill signal to tasks where a vma covers
+ * the page but the corrupted page is not necessarily
+ * mapped it in its pte.
+ * Assume applications who requested early kill want
+ * to be informed of all such data corruptions.
+ */
+ if (vma->vm_mm == tsk->mm)
+ add_to_kill(tsk, page, vma, to_kill, tkc);
+ }
+ }
+ spin_unlock(&mapping->i_mmap_lock);
+ read_unlock(&tasklist_lock);
+}
+
+/*
+ * Collect the processes who have the corrupted page mapped to kill.
+ * This is done in two steps for locking reasons.
+ * First preallocate one tokill structure outside the spin locks,
+ * so that we can kill at least one process reasonably reliable.
+ */
+static void collect_procs(struct page *page, struct list_head *tokill)
+{
+ struct to_kill *tk;
+
+ if (!page->mapping)
+ return;
+
+ tk = kmalloc(sizeof(struct to_kill), GFP_NOIO);
+ if (!tk)
+ return;
+ if (PageAnon(page))
+ collect_procs_anon(page, tokill, &tk);
+ else
+ collect_procs_file(page, tokill, &tk);
+ kfree(tk);
+}
+
+/*
+ * Error handlers for various types of pages.
+ */
+
+enum outcome {
+ FAILED, /* Error handling failed */
+ DELAYED, /* Will be handled later */
+ IGNORED, /* Error safely ignored */
+ RECOVERED, /* Successfully recovered */
+};
+
+static const char *action_name[] = {
+ [FAILED] = "Failed",
+ [DELAYED] = "Delayed",
+ [IGNORED] = "Ignored",
+ [RECOVERED] = "Recovered",
+};
+
+/*
+ * Error hit kernel page.
+ * Do nothing, try to be lucky and not touch this instead. For a few cases we
+ * could be more sophisticated.
+ */
+static int me_kernel(struct page *p, unsigned long pfn)
+{
+ return DELAYED;
+}
+
+/*
+ * Already poisoned page.
+ */
+static int me_ignore(struct page *p, unsigned long pfn)
+{
+ return IGNORED;
+}
+
+/*
+ * Page in unknown state. Do nothing.
+ */
+static int me_unknown(struct page *p, unsigned long pfn)
+{
+ printk(KERN_ERR "MCE %#lx: Unknown page state\n", pfn);
+ return FAILED;
+}
+
+/*
+ * Free memory
+ */
+static int me_free(struct page *p, unsigned long pfn)
+{
+ return DELAYED;
+}
+
+/*
+ * Clean (or cleaned) page cache page.
+ */
+static int me_pagecache_clean(struct page *p, unsigned long pfn)
+{
+ int err;
+ int ret = FAILED;
+ struct address_space *mapping;
+
+ if (!isolate_lru_page(p))
+ page_cache_release(p);
+
+ /*
+ * For anonymous pages we're done the only reference left
+ * should be the one m_f() holds.
+ */
+ if (PageAnon(p))
+ return RECOVERED;
+
+ /*
+ * Now truncate the page in the page cache. This is really
+ * more like a "temporary hole punch"
+ * Don't do this for block devices when someone else
+ * has a reference, because it could be file system metadata
+ * and that's not safe to truncate.
+ */
+ mapping = page_mapping(p);
+ if (!mapping) {
+ /*
+ * Page has been teared down in the meanwhile
+ */
+ return FAILED;
+ }
+
+ /*
+ * Truncation is a bit tricky. Enable it per file system for now.
+ *
+ * Open: to take i_mutex or not for this? Right now we don't.
+ */
+ if (mapping->a_ops->error_remove_page) {
+ err = mapping->a_ops->error_remove_page(mapping, p);
+ if (err != 0) {
+ printk(KERN_INFO "MCE %#lx: Failed to punch page: %d\n",
+ pfn, err);
+ } else if (page_has_private(p) &&
+ !try_to_release_page(p, GFP_NOIO)) {
+ pr_debug("MCE %#lx: failed to release buffers\n", pfn);
+ } else {
+ ret = RECOVERED;
+ }
+ } else {
+ /*
+ * If the file system doesn't support it just invalidate
+ * This fails on dirty or anything with private pages
+ */
+ if (invalidate_inode_page(p))
+ ret = RECOVERED;
+ else
+ printk(KERN_INFO "MCE %#lx: Failed to invalidate\n",
+ pfn);
+ }
+ return ret;
+}
+
+/*
+ * Dirty cache page page
+ * Issues: when the error hit a hole page the error is not properly
+ * propagated.
+ */
+static int me_pagecache_dirty(struct page *p, unsigned long pfn)
+{
+ struct address_space *mapping = page_mapping(p);
+
+ SetPageError(p);
+ /* TBD: print more information about the file. */
+ if (mapping) {
+ /*
+ * IO error will be reported by write(), fsync(), etc.
+ * who check the mapping.
+ * This way the application knows that something went
+ * wrong with its dirty file data.
+ *
+ * There's one open issue:
+ *
+ * The EIO will be only reported on the next IO
+ * operation and then cleared through the IO map.
+ * Normally Linux has two mechanisms to pass IO error
+ * first through the AS_EIO flag in the address space
+ * and then through the PageError flag in the page.
+ * Since we drop pages on memory failure handling the
+ * only mechanism open to use is through AS_AIO.
+ *
+ * This has the disadvantage that it gets cleared on
+ * the first operation that returns an error, while
+ * the PageError bit is more sticky and only cleared
+ * when the page is reread or dropped. If an
+ * application assumes it will always get error on
+ * fsync, but does other operations on the fd before
+ * and the page is dropped inbetween then the error
+ * will not be properly reported.
+ *
+ * This can already happen even without hwpoisoned
+ * pages: first on metadata IO errors (which only
+ * report through AS_EIO) or when the page is dropped
+ * at the wrong time.
+ *
+ * So right now we assume that the application DTRT on
+ * the first EIO, but we're not worse than other parts
+ * of the kernel.
+ */
+ mapping_set_error(mapping, EIO);
+ }
+
+ return me_pagecache_clean(p, pfn);
+}
+
+/*
+ * Clean and dirty swap cache.
+ *
+ * Dirty swap cache page is tricky to handle. The page could live both in page
+ * cache and swap cache(ie. page is freshly swapped in). So it could be
+ * referenced concurrently by 2 types of PTEs:
+ * normal PTEs and swap PTEs. We try to handle them consistently by calling
+ * try_to_unmap(TTU_IGNORE_HWPOISON) to convert the normal PTEs to swap PTEs,
+ * and then
+ * - clear dirty bit to prevent IO
+ * - remove from LRU
+ * - but keep in the swap cache, so that when we return to it on
+ * a later page fault, we know the application is accessing
+ * corrupted data and shall be killed (we installed simple
+ * interception code in do_swap_page to catch it).
+ *
+ * Clean swap cache pages can be directly isolated. A later page fault will
+ * bring in the known good data from disk.
+ */
+static int me_swapcache_dirty(struct page *p, unsigned long pfn)
+{
+ int ret = FAILED;
+
+ ClearPageDirty(p);
+ /* Trigger EIO in shmem: */
+ ClearPageUptodate(p);
+
+ if (!isolate_lru_page(p)) {
+ page_cache_release(p);
+ ret = DELAYED;
+ }
+
+ return ret;
+}
+
+static int me_swapcache_clean(struct page *p, unsigned long pfn)
+{
+ int ret = FAILED;
+
+ if (!isolate_lru_page(p)) {
+ page_cache_release(p);
+ ret = RECOVERED;
+ }
+ delete_from_swap_cache(p);
+ return ret;
+}
+
+/*
+ * Huge pages. Needs work.
+ * Issues:
+ * No rmap support so we cannot find the original mapper. In theory could walk
+ * all MMs and look for the mappings, but that would be non atomic and racy.
+ * Need rmap for hugepages for this. Alternatively we could employ a heuristic,
+ * like just walking the current process and hoping it has it mapped (that
+ * should be usually true for the common "shared database cache" case)
+ * Should handle free huge pages and dequeue them too, but this needs to
+ * handle huge page accounting correctly.
+ */
+static int me_huge_page(struct page *p, unsigned long pfn)
+{
+ return FAILED;
+}
+
+/*
+ * Various page states we can handle.
+ *
+ * A page state is defined by its current page->flags bits.
+ * The table matches them in order and calls the right handler.
+ *
+ * This is quite tricky because we can access page at any time
+ * in its live cycle, so all accesses have to be extremly careful.
+ *
+ * This is not complete. More states could be added.
+ * For any missing state don't attempt recovery.
+ */
+
+#define dirty (1UL << PG_dirty)
+#define sc (1UL << PG_swapcache)
+#define unevict (1UL << PG_unevictable)
+#define mlock (1UL << PG_mlocked)
+#define writeback (1UL << PG_writeback)
+#define lru (1UL << PG_lru)
+#define swapbacked (1UL << PG_swapbacked)
+#define head (1UL << PG_head)
+#define tail (1UL << PG_tail)
+#define compound (1UL << PG_compound)
+#define slab (1UL << PG_slab)
+#define buddy (1UL << PG_buddy)
+#define reserved (1UL << PG_reserved)
+
+static struct page_state {
+ unsigned long mask;
+ unsigned long res;
+ char *msg;
+ int (*action)(struct page *p, unsigned long pfn);
+} error_states[] = {
+ { reserved, reserved, "reserved kernel", me_ignore },
+ { buddy, buddy, "free kernel", me_free },
+
+ /*
+ * Could in theory check if slab page is free or if we can drop
+ * currently unused objects without touching them. But just
+ * treat it as standard kernel for now.
+ */
+ { slab, slab, "kernel slab", me_kernel },
+
+#ifdef CONFIG_PAGEFLAGS_EXTENDED
+ { head, head, "huge", me_huge_page },
+ { tail, tail, "huge", me_huge_page },
+#else
+ { compound, compound, "huge", me_huge_page },
+#endif
+
+ { sc|dirty, sc|dirty, "swapcache", me_swapcache_dirty },
+ { sc|dirty, sc, "swapcache", me_swapcache_clean },
+
+ { unevict|dirty, unevict|dirty, "unevictable LRU", me_pagecache_dirty},
+ { unevict, unevict, "unevictable LRU", me_pagecache_clean},
+
+#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
+ { mlock|dirty, mlock|dirty, "mlocked LRU", me_pagecache_dirty },
+ { mlock, mlock, "mlocked LRU", me_pagecache_clean },
+#endif
+
+ { lru|dirty, lru|dirty, "LRU", me_pagecache_dirty },
+ { lru|dirty, lru, "clean LRU", me_pagecache_clean },
+ { swapbacked, swapbacked, "anonymous", me_pagecache_clean },
+
+ /*
+ * Catchall entry: must be at end.
+ */
+ { 0, 0, "unknown page state", me_unknown },
+};
+
+#undef lru
+
+static void action_result(unsigned long pfn, char *msg, int result)
+{
+ struct page *page = NULL;
+ if (pfn_valid(pfn))
+ page = pfn_to_page(pfn);
+
+ printk(KERN_ERR "MCE %#lx: %s%s page recovery: %s\n",
+ pfn,
+ page && PageDirty(page) ? "dirty " : "",
+ msg, action_name[result]);
+}
+
+static int page_action(struct page_state *ps, struct page *p,
+ unsigned long pfn, int ref)
+{
+ int result;
+
+ result = ps->action(p, pfn);
+ action_result(pfn, ps->msg, result);
+ if (page_count(p) != 1 + ref)
+ printk(KERN_ERR
+ "MCE %#lx: %s page still referenced by %d users\n",
+ pfn, ps->msg, page_count(p) - 1);
+
+ /* Could do more checks here if page looks ok */
+ /*
+ * Could adjust zone counters here to correct for the missing page.
+ */
+
+ return result == RECOVERED ? 0 : -EBUSY;
+}
+
+#define N_UNMAP_TRIES 5
+
+/*
+ * Do all that is necessary to remove user space mappings. Unmap
+ * the pages and send SIGBUS to the processes if the data was dirty.
+ */
+static void hwpoison_user_mappings(struct page *p, unsigned long pfn,
+ int trapno)
+{
+ enum ttu_flags ttu = TTU_UNMAP | TTU_IGNORE_MLOCK | TTU_IGNORE_ACCESS;
+ struct address_space *mapping;
+ LIST_HEAD(tokill);
+ int ret;
+ int i;
+ int kill = 1;
+
+ if (PageReserved(p) || PageCompound(p) || PageSlab(p))
+ return;
+
+ if (!PageLRU(p))
+ lru_add_drain_all();
+
+ /*
+ * This check implies we don't kill processes if their pages
+ * are in the swap cache early. Those are always late kills.
+ */
+ if (!page_mapped(p))
+ return;
+
+ if (PageSwapCache(p)) {
+ printk(KERN_ERR
+ "MCE %#lx: keeping poisoned page in swap cache\n", pfn);
+ ttu |= TTU_IGNORE_HWPOISON;
+ }
+
+ /*
+ * Propagate the dirty bit from PTEs to struct page first, because we
+ * need this to decide if we should kill or just drop the page.
+ */
+ mapping = page_mapping(p);
+ if (!PageDirty(p) && mapping && mapping_cap_writeback_dirty(mapping)) {
+ if (page_mkclean(p)) {
+ SetPageDirty(p);
+ } else {
+ kill = 0;
+ ttu |= TTU_IGNORE_HWPOISON;
+ printk(KERN_INFO
+ "MCE %#lx: corrupted page was clean: dropped without side effects\n",
+ pfn);
+ }
+ }
+
+ /*
+ * First collect all the processes that have the page
+ * mapped in dirty form. This has to be done before try_to_unmap,
+ * because ttu takes the rmap data structures down.
+ *
+ * Error handling: We ignore errors here because
+ * there's nothing that can be done.
+ */
+ if (kill)
+ collect_procs(p, &tokill);
+
+ /*
+ * try_to_unmap can fail temporarily due to races.
+ * Try a few times (RED-PEN better strategy?)
+ */
+ for (i = 0; i < N_UNMAP_TRIES; i++) {
+ ret = try_to_unmap(p, ttu);
+ if (ret == SWAP_SUCCESS)
+ break;
+ pr_debug("MCE %#lx: try_to_unmap retry needed %d\n", pfn, ret);
+ }
+
+ if (ret != SWAP_SUCCESS)
+ printk(KERN_ERR "MCE %#lx: failed to unmap page (mapcount=%d)\n",
+ pfn, page_mapcount(p));
+
+ /*
+ * Now that the dirty bit has been propagated to the
+ * struct page and all unmaps done we can decide if
+ * killing is needed or not. Only kill when the page
+ * was dirty, otherwise the tokill list is merely
+ * freed. When there was a problem unmapping earlier
+ * use a more force-full uncatchable kill to prevent
+ * any accesses to the poisoned memory.
+ */
+ kill_procs_ao(&tokill, !!PageDirty(p), trapno,
+ ret != SWAP_SUCCESS, pfn);
+}
+
+int __memory_failure(unsigned long pfn, int trapno, int ref)
+{
+ struct page_state *ps;
+ struct page *p;
+ int res;
+
+ if (!sysctl_memory_failure_recovery)
+ panic("Memory failure from trap %d on page %lx", trapno, pfn);
+
+ if (!pfn_valid(pfn)) {
+ action_result(pfn, "memory outside kernel control", IGNORED);
+ return -EIO;
+ }
+
+ p = pfn_to_page(pfn);
+ if (TestSetPageHWPoison(p)) {
+ action_result(pfn, "already hardware poisoned", IGNORED);
+ return 0;
+ }
+
+ atomic_long_add(1, &mce_bad_pages);
+
+ /*
+ * We need/can do nothing about count=0 pages.
+ * 1) it's a free page, and therefore in safe hand:
+ * prep_new_page() will be the gate keeper.
+ * 2) it's part of a non-compound high order page.
+ * Implies some kernel user: cannot stop them from
+ * R/W the page; let's pray that the page has been
+ * used and will be freed some time later.
+ * In fact it's dangerous to directly bump up page count from 0,
+ * that may make page_freeze_refs()/page_unfreeze_refs() mismatch.
+ */
+ if (!get_page_unless_zero(compound_head(p))) {
+ action_result(pfn, "free or high order kernel", IGNORED);
+ return PageBuddy(compound_head(p)) ? 0 : -EBUSY;
+ }
+
+ /*
+ * Lock the page and wait for writeback to finish.
+ * It's very difficult to mess with pages currently under IO
+ * and in many cases impossible, so we just avoid it here.
+ */
+ lock_page_nosync(p);
+ wait_on_page_writeback(p);
+
+ /*
+ * Now take care of user space mappings.
+ */
+ hwpoison_user_mappings(p, pfn, trapno);
+
+ /*
+ * Torn down by someone else?
+ */
+ if (PageLRU(p) && !PageSwapCache(p) && p->mapping == NULL) {
+ action_result(pfn, "already truncated LRU", IGNORED);
+ res = 0;
+ goto out;
+ }
+
+ res = -EBUSY;
+ for (ps = error_states;; ps++) {
+ if ((p->flags & ps->mask) == ps->res) {
+ res = page_action(ps, p, pfn, ref);
+ break;
+ }
+ }
+out:
+ unlock_page(p);
+ return res;
+}
+EXPORT_SYMBOL_GPL(__memory_failure);
+
+/**
+ * memory_failure - Handle memory failure of a page.
+ * @pfn: Page Number of the corrupted page
+ * @trapno: Trap number reported in the signal to user space.
+ *
+ * This function is called by the low level machine check code
+ * of an architecture when it detects hardware memory corruption
+ * of a page. It tries its best to recover, which includes
+ * dropping pages, killing processes etc.
+ *
+ * The function is primarily of use for corruptions that
+ * happen outside the current execution context (e.g. when
+ * detected by a background scrubber)
+ *
+ * Must run in process context (e.g. a work queue) with interrupts
+ * enabled and no spinlocks hold.
+ */
+void memory_failure(unsigned long pfn, int trapno)
+{
+ __memory_failure(pfn, trapno, 0);
+}
unsigned long addr = vma->vm_start;
/*
- * Hide vma from rmap and vmtruncate before freeing pgtables
+ * Hide vma from rmap and truncate_pagecache before freeing
+ * pgtables
*/
anon_vma_unlink(vma);
unlink_file_vma(vma);
if (ret & VM_FAULT_ERROR) {
if (ret & VM_FAULT_OOM)
return i ? i : -ENOMEM;
- else if (ret & VM_FAULT_SIGBUS)
+ if (ret &
+ (VM_FAULT_HWPOISON|VM_FAULT_SIGBUS))
return i ? i : -EFAULT;
BUG();
}
* @mapping: the address space containing mmaps to be unmapped.
* @holebegin: byte in first page to unmap, relative to the start of
* the underlying file. This will be rounded down to a PAGE_SIZE
- * boundary. Note that this is different from vmtruncate(), which
+ * boundary. Note that this is different from truncate_pagecache(), which
* must keep the partial page. In contrast, we must get rid of
* partial pages.
* @holelen: size of prospective hole in bytes. This will be rounded
}
EXPORT_SYMBOL(unmap_mapping_range);
-/**
- * vmtruncate - unmap mappings "freed" by truncate() syscall
- * @inode: inode of the file used
- * @offset: file offset to start truncating
- *
- * NOTE! We have to be ready to update the memory sharing
- * between the file and the memory map for a potential last
- * incomplete page. Ugly, but necessary.
- */
-int vmtruncate(struct inode * inode, loff_t offset)
-{
- if (inode->i_size < offset) {
- unsigned long limit;
-
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit)
- goto out_sig;
- if (offset > inode->i_sb->s_maxbytes)
- goto out_big;
- i_size_write(inode, offset);
- } else {
- struct address_space *mapping = inode->i_mapping;
-
- /*
- * truncation of in-use swapfiles is disallowed - it would
- * cause subsequent swapout to scribble on the now-freed
- * blocks.
- */
- if (IS_SWAPFILE(inode))
- return -ETXTBSY;
- i_size_write(inode, offset);
-
- /*
- * unmap_mapping_range is called twice, first simply for
- * efficiency so that truncate_inode_pages does fewer
- * single-page unmaps. However after this first call, and
- * before truncate_inode_pages finishes, it is possible for
- * private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second
- * unmap_mapping_range call must be made for correctness.
- */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- }
-
- if (inode->i_op->truncate)
- inode->i_op->truncate(inode);
- return 0;
-
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out_big:
- return -EFBIG;
-}
-EXPORT_SYMBOL(vmtruncate);
-
int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end)
{
struct address_space *mapping = inode->i_mapping;
goto out;
entry = pte_to_swp_entry(orig_pte);
- if (is_migration_entry(entry)) {
- migration_entry_wait(mm, pmd, address);
+ if (unlikely(non_swap_entry(entry))) {
+ if (is_migration_entry(entry)) {
+ migration_entry_wait(mm, pmd, address);
+ } else if (is_hwpoison_entry(entry)) {
+ ret = VM_FAULT_HWPOISON;
+ } else {
+ print_bad_pte(vma, address, orig_pte, NULL);
+ ret = VM_FAULT_OOM;
+ }
goto out;
}
delayacct_set_flag(DELAYACCT_PF_SWAPIN);
/* Had to read the page from swap area: Major fault */
ret = VM_FAULT_MAJOR;
count_vm_event(PGMAJFAULT);
+ } else if (PageHWPoison(page)) {
+ ret = VM_FAULT_HWPOISON;
+ delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
+ goto out;
}
lock_page(page);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
return ret;
+ if (unlikely(PageHWPoison(vmf.page))) {
+ if (ret & VM_FAULT_LOCKED)
+ unlock_page(vmf.page);
+ return VM_FAULT_HWPOISON;
+ }
+
/*
* For consistency in subsequent calls, make the faulted page always
* locked.
}
/* Establish migration ptes or remove ptes */
- try_to_unmap(page, 1);
+ try_to_unmap(page, TTU_MIGRATION|TTU_IGNORE_MLOCK|TTU_IGNORE_ACCESS);
skip_unmap:
if (!page_mapped(page))
if (vma->vm_file) {
/*
* Subtle point from Rajesh Venkatasubramanian: before
- * moving file-based ptes, we must lock vmtruncate out,
- * since it might clean the dst vma before the src vma,
+ * moving file-based ptes, we must lock truncate_pagecache
+ * out, since it might clean the dst vma before the src vma,
* and we propagate stale pages into the dst afterward.
*/
mapping = vma->vm_file->f_mapping;
struct vm_operations_struct generic_file_vm_ops = {
};
-/*
- * Handle all mappings that got truncated by a "truncate()"
- * system call.
- *
- * NOTE! We have to be ready to update the memory sharing
- * between the file and the memory map for a potential last
- * incomplete page. Ugly, but necessary.
- */
-int vmtruncate(struct inode *inode, loff_t offset)
-{
- struct address_space *mapping = inode->i_mapping;
- unsigned long limit;
-
- if (inode->i_size < offset)
- goto do_expand;
- i_size_write(inode, offset);
-
- truncate_inode_pages(mapping, offset);
- goto out_truncate;
-
-do_expand:
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit)
- goto out_sig;
- if (offset > inode->i_sb->s_maxbytes)
- goto out;
- i_size_write(inode, offset);
-
-out_truncate:
- if (inode->i_op->truncate)
- inode->i_op->truncate(inode);
- return 0;
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out:
- return -EFBIG;
-}
-
-EXPORT_SYMBOL(vmtruncate);
-
/*
* Return the total memory allocated for this pointer, not
* just what the caller asked for.
int ret;
/* do the simple checks first */
- if (flags & MAP_FIXED || addr) {
+ if (flags & MAP_FIXED) {
printk(KERN_DEBUG
"%d: Can't do fixed-address/overlay mmap of RAM\n",
current->pid);
ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
if (ret == 0) {
vma->vm_region->vm_top = vma->vm_region->vm_end;
- return ret;
+ return 0;
}
if (ret != -ENOSYS)
return ret;
*/
static int do_mmap_private(struct vm_area_struct *vma,
struct vm_region *region,
- unsigned long len)
+ unsigned long len,
+ unsigned long capabilities)
{
struct page *pages;
unsigned long total, point, n, rlen;
* shared mappings on devices or memory
* - VM_MAYSHARE will be set if it may attempt to share
*/
- if (vma->vm_file) {
+ if (capabilities & BDI_CAP_MAP_DIRECT) {
ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
if (ret == 0) {
/* shouldn't return success if we're not sharing */
BUG_ON(!(vma->vm_flags & VM_MAYSHARE));
vma->vm_region->vm_top = vma->vm_region->vm_end;
- return ret;
+ return 0;
}
if (ret != -ENOSYS)
return ret;
kenter(",%lx,%lx,%lx,%lx,%lx", addr, len, prot, flags, pgoff);
- if (!(flags & MAP_FIXED))
- addr = round_hint_to_min(addr);
-
/* decide whether we should attempt the mapping, and if so what sort of
* mapping */
ret = validate_mmap_request(file, addr, len, prot, flags, pgoff,
return ret;
}
+ /* we ignore the address hint */
+ addr = 0;
+
/* we've determined that we can make the mapping, now translate what we
* now know into VMA flags */
vm_flags = determine_vm_flags(file, prot, flags, capabilities);
* - this is the hook for quasi-memory character devices to
* tell us the location of a shared mapping
*/
- if (file && file->f_op->get_unmapped_area) {
+ if (capabilities & BDI_CAP_MAP_DIRECT) {
addr = file->f_op->get_unmapped_area(file, addr, len,
pgoff, flags);
if (IS_ERR((void *) addr)) {
}
vma->vm_region = region;
- add_nommu_region(region);
- /* set up the mapping */
+ /* set up the mapping
+ * - the region is filled in if BDI_CAP_MAP_DIRECT is still set
+ */
if (file && vma->vm_flags & VM_SHARED)
ret = do_mmap_shared_file(vma);
else
- ret = do_mmap_private(vma, region, len);
+ ret = do_mmap_private(vma, region, len, capabilities);
if (ret < 0)
- goto error_put_region;
+ goto error_just_free;
+ add_nommu_region(region);
/* okay... we have a mapping; now we have to register it */
result = vma->vm_start;
kleave(" = %lx", result);
return result;
-error_put_region:
- __put_nommu_region(region);
- if (vma) {
- if (vma->vm_file) {
- fput(vma->vm_file);
- if (vma->vm_flags & VM_EXECUTABLE)
- removed_exe_file_vma(vma->vm_mm);
- }
- kmem_cache_free(vm_area_cachep, vma);
- }
- kleave(" = %d [pr]", ret);
- return ret;
-
error_just_free:
up_write(&nommu_region_sem);
error:
/*
* When balance_dirty_pages decides that the caller needs to perform some
* non-background writeback, this is how many pages it will attempt to write.
- * It should be somewhat larger than RATELIMIT_PAGES to ensure that reasonably
+ * It should be somewhat larger than dirtied pages to ensure that reasonably
* large amounts of I/O are submitted.
*/
-static inline long sync_writeback_pages(void)
+static inline long sync_writeback_pages(unsigned long dirtied)
{
- return ratelimit_pages + ratelimit_pages / 2;
+ if (dirtied < ratelimit_pages)
+ dirtied = ratelimit_pages;
+
+ return dirtied + dirtied / 2;
}
/* The following parameters are exported via /proc/sys/vm */
/*
- * Start background writeback (via pdflush) at this percentage
+ * Start background writeback (via writeback threads) at this percentage
*/
int dirty_background_ratio = 10;
}
int dirty_background_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
- ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write)
dirty_background_bytes = 0;
return ret;
}
int dirty_background_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write)
dirty_background_ratio = 0;
return ret;
}
int dirty_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int old_ratio = vm_dirty_ratio;
int ret;
- ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
update_completion_period();
vm_dirty_bytes = 0;
int dirty_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
unsigned long old_bytes = vm_dirty_bytes;
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write && vm_dirty_bytes != old_bytes) {
update_completion_period();
vm_dirty_ratio = 0;
* balance_dirty_pages() must be called by processes which are generating dirty
* data. It looks at the number of dirty pages in the machine and will force
* the caller to perform writeback if the system is over `vm_dirty_ratio'.
- * If we're over `background_thresh' then pdflush is woken to perform some
- * writeout.
+ * If we're over `background_thresh' then the writeback threads are woken to
+ * perform some writeout.
*/
-static void balance_dirty_pages(struct address_space *mapping)
+static void balance_dirty_pages(struct address_space *mapping,
+ unsigned long write_chunk)
{
long nr_reclaimable, bdi_nr_reclaimable;
long nr_writeback, bdi_nr_writeback;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
unsigned long pages_written = 0;
- unsigned long write_chunk = sync_writeback_pages();
unsigned long pause = 1;
struct backing_dev_info *bdi = mapping->backing_dev_info;
bdi->dirty_exceeded = 0;
if (writeback_in_progress(bdi))
- return; /* pdflush is already working this queue */
+ return;
/*
* In laptop mode, we wait until hitting the higher threshold before
* background_thresh, to keep the amount of dirty memory low.
*/
if ((laptop_mode && pages_written) ||
- (!laptop_mode && ((nr_writeback = global_page_state(NR_FILE_DIRTY)
- + global_page_state(NR_UNSTABLE_NFS))
+ (!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
+ + global_page_state(NR_UNSTABLE_NFS))
> background_thresh)))
- bdi_start_writeback(bdi, nr_writeback);
+ bdi_start_writeback(bdi, NULL, 0);
}
void set_page_dirty_balance(struct page *page, int page_mkwrite)
p = &__get_cpu_var(bdp_ratelimits);
*p += nr_pages_dirtied;
if (unlikely(*p >= ratelimit)) {
+ ratelimit = sync_writeback_pages(*p);
*p = 0;
preempt_enable();
- balance_dirty_pages(mapping);
+ balance_dirty_pages(mapping, ratelimit);
return;
}
preempt_enable();
* sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
*/
int dirty_writeback_centisecs_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
return 0;
}
EXPORT_SYMBOL(redirty_page_for_writepage);
/*
+ * Dirty a page.
+ *
+ * For pages with a mapping this should be done under the page lock
+ * for the benefit of asynchronous memory errors who prefer a consistent
+ * dirty state. This rule can be broken in some special cases,
+ * but should be better not to.
+ *
* If the mapping doesn't provide a set_page_dirty a_op, then
* just fall through and assume that it wants buffer_heads.
*/
static unsigned long nr_shown;
static unsigned long nr_unshown;
+ /* Don't complain about poisoned pages */
+ if (PageHWPoison(page)) {
+ __ClearPageBuddy(page);
+ return;
+ }
+
/*
* Allow a burst of 60 reports, then keep quiet for that minute;
* or allow a steady drip of one report per second.
/*
* This page is about to be returned from the page allocator
*/
-static int prep_new_page(struct page *page, int order, gfp_t gfp_flags)
+static inline int check_new_page(struct page *page)
{
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
bad_page(page);
return 1;
}
+ return 0;
+}
+
+static int prep_new_page(struct page *page, int order, gfp_t gfp_flags)
+{
+ int i;
+
+ for (i = 0; i < (1 << order); i++) {
+ struct page *p = page + i;
+ if (unlikely(check_new_page(p)))
+ return 1;
+ }
set_page_private(page, 0);
set_page_refcounted(page);
* sysctl handler for numa_zonelist_order
*/
int numa_zonelist_order_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length,
+ void __user *buffer, size_t *length,
loff_t *ppos)
{
char saved_string[NUMA_ZONELIST_ORDER_LEN];
if (write)
strncpy(saved_string, (char*)table->data,
NUMA_ZONELIST_ORDER_LEN);
- ret = proc_dostring(table, write, file, buffer, length, ppos);
+ ret = proc_dostring(table, write, buffer, length, ppos);
if (ret)
return ret;
if (write) {
* changes.
*/
int min_free_kbytes_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
if (write)
setup_per_zone_wmarks();
return 0;
#ifdef CONFIG_NUMA
int sysctl_min_unmapped_ratio_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
struct zone *zone;
int rc;
- rc = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ rc = proc_dointvec_minmax(table, write, buffer, length, ppos);
if (rc)
return rc;
}
int sysctl_min_slab_ratio_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
struct zone *zone;
int rc;
- rc = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ rc = proc_dointvec_minmax(table, write, buffer, length, ppos);
if (rc)
return rc;
* if in function of the boot time zone sizes.
*/
int lowmem_reserve_ratio_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ proc_dointvec_minmax(table, write, buffer, length, ppos);
setup_per_zone_lowmem_reserve();
return 0;
}
*/
int percpu_pagelist_fraction_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
struct zone *zone;
unsigned int cpu;
int ret;
- ret = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, length, ppos);
if (!write || (ret == -EINVAL))
return ret;
for_each_populated_zone(zone) {
int node = numa_node_id();
struct zone *zones = NODE_DATA(node)->node_zones;
int num_cpus_on_node;
- const struct cpumask *cpumask_on_node = cpumask_of_node(node);
node_free_pages =
#ifdef CONFIG_ZONE_DMA
max = node_free_pages / FRACTION_OF_NODE_MEM;
- num_cpus_on_node = cpus_weight_nr(*cpumask_on_node);
+ num_cpus_on_node = cpumask_weight(cpumask_of_node(node));
max /= num_cpus_on_node;
return max(max, min_pages);
* mapping->tree_lock (widely used, in set_page_dirty,
* in arch-dependent flush_dcache_mmap_lock,
* within inode_lock in __sync_single_inode)
+ *
+ * (code doesn't rely on that order so it could be switched around)
+ * ->tasklist_lock
+ * anon_vma->lock (memory_failure, collect_procs_anon)
+ * pte map lock
*/
#include <linux/mm.h>
* Getting a lock on a stable anon_vma from a page off the LRU is
* tricky: page_lock_anon_vma rely on RCU to guard against the races.
*/
-static struct anon_vma *page_lock_anon_vma(struct page *page)
+struct anon_vma *page_lock_anon_vma(struct page *page)
{
struct anon_vma *anon_vma;
unsigned long anon_mapping;
return NULL;
}
-static void page_unlock_anon_vma(struct anon_vma *anon_vma)
+void page_unlock_anon_vma(struct anon_vma *anon_vma)
{
spin_unlock(&anon_vma->lock);
rcu_read_unlock();
* if the page is not mapped into the page tables of this VMA. Only
* valid for normal file or anonymous VMAs.
*/
-static int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma)
+int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma)
{
unsigned long address;
pte_t *pte;
* repeatedly from either try_to_unmap_anon or try_to_unmap_file.
*/
static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
- int migration)
+ enum ttu_flags flags)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
* If it's recently referenced (perhaps page_referenced
* skipped over this mm) then we should reactivate it.
*/
- if (!migration) {
+ if (!(flags & TTU_IGNORE_MLOCK)) {
if (vma->vm_flags & VM_LOCKED) {
ret = SWAP_MLOCK;
goto out_unmap;
}
+ }
+ if (!(flags & TTU_IGNORE_ACCESS)) {
if (ptep_clear_flush_young_notify(vma, address, pte)) {
ret = SWAP_FAIL;
goto out_unmap;
/* Update high watermark before we lower rss */
update_hiwater_rss(mm);
- if (PageAnon(page)) {
+ if (PageHWPoison(page) && !(flags & TTU_IGNORE_HWPOISON)) {
+ if (PageAnon(page))
+ dec_mm_counter(mm, anon_rss);
+ else
+ dec_mm_counter(mm, file_rss);
+ set_pte_at(mm, address, pte,
+ swp_entry_to_pte(make_hwpoison_entry(page)));
+ } else if (PageAnon(page)) {
swp_entry_t entry = { .val = page_private(page) };
if (PageSwapCache(page)) {
* pte. do_swap_page() will wait until the migration
* pte is removed and then restart fault handling.
*/
- BUG_ON(!migration);
+ BUG_ON(TTU_ACTION(flags) != TTU_MIGRATION);
entry = make_migration_entry(page, pte_write(pteval));
}
set_pte_at(mm, address, pte, swp_entry_to_pte(entry));
BUG_ON(pte_file(*pte));
- } else if (PAGE_MIGRATION && migration) {
+ } else if (PAGE_MIGRATION && (TTU_ACTION(flags) == TTU_MIGRATION)) {
/* Establish migration entry for a file page */
swp_entry_t entry;
entry = make_migration_entry(page, pte_write(pteval));
* vm_flags for that VMA. That should be OK, because that vma shouldn't be
* 'LOCKED.
*/
-static int try_to_unmap_anon(struct page *page, int unlock, int migration)
+static int try_to_unmap_anon(struct page *page, enum ttu_flags flags)
{
struct anon_vma *anon_vma;
struct vm_area_struct *vma;
unsigned int mlocked = 0;
int ret = SWAP_AGAIN;
+ int unlock = TTU_ACTION(flags) == TTU_MUNLOCK;
if (MLOCK_PAGES && unlikely(unlock))
ret = SWAP_SUCCESS; /* default for try_to_munlock() */
continue; /* must visit all unlocked vmas */
ret = SWAP_MLOCK; /* saw at least one mlocked vma */
} else {
- ret = try_to_unmap_one(page, vma, migration);
+ ret = try_to_unmap_one(page, vma, flags);
if (ret == SWAP_FAIL || !page_mapped(page))
break;
}
/**
* try_to_unmap_file - unmap/unlock file page using the object-based rmap method
* @page: the page to unmap/unlock
- * @unlock: request for unlock rather than unmap [unlikely]
- * @migration: unmapping for migration - ignored if @unlock
+ * @flags: action and flags
*
* Find all the mappings of a page using the mapping pointer and the vma chains
* contained in the address_space struct it points to.
* vm_flags for that VMA. That should be OK, because that vma shouldn't be
* 'LOCKED.
*/
-static int try_to_unmap_file(struct page *page, int unlock, int migration)
+static int try_to_unmap_file(struct page *page, enum ttu_flags flags)
{
struct address_space *mapping = page->mapping;
pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
unsigned long max_nl_size = 0;
unsigned int mapcount;
unsigned int mlocked = 0;
+ int unlock = TTU_ACTION(flags) == TTU_MUNLOCK;
if (MLOCK_PAGES && unlikely(unlock))
ret = SWAP_SUCCESS; /* default for try_to_munlock() */
continue; /* must visit all vmas */
ret = SWAP_MLOCK;
} else {
- ret = try_to_unmap_one(page, vma, migration);
+ ret = try_to_unmap_one(page, vma, flags);
if (ret == SWAP_FAIL || !page_mapped(page))
goto out;
}
ret = SWAP_MLOCK; /* leave mlocked == 0 */
goto out; /* no need to look further */
}
- if (!MLOCK_PAGES && !migration && (vma->vm_flags & VM_LOCKED))
+ if (!MLOCK_PAGES && !(flags & TTU_IGNORE_MLOCK) &&
+ (vma->vm_flags & VM_LOCKED))
continue;
cursor = (unsigned long) vma->vm_private_data;
if (cursor > max_nl_cursor)
do {
list_for_each_entry(vma, &mapping->i_mmap_nonlinear,
shared.vm_set.list) {
- if (!MLOCK_PAGES && !migration &&
+ if (!MLOCK_PAGES && !(flags & TTU_IGNORE_MLOCK) &&
(vma->vm_flags & VM_LOCKED))
continue;
cursor = (unsigned long) vma->vm_private_data;
/**
* try_to_unmap - try to remove all page table mappings to a page
* @page: the page to get unmapped
- * @migration: migration flag
+ * @flags: action and flags
*
* Tries to remove all the page table entries which are mapping this
* page, used in the pageout path. Caller must hold the page lock.
* SWAP_FAIL - the page is unswappable
* SWAP_MLOCK - page is mlocked.
*/
-int try_to_unmap(struct page *page, int migration)
+int try_to_unmap(struct page *page, enum ttu_flags flags)
{
int ret;
BUG_ON(!PageLocked(page));
if (PageAnon(page))
- ret = try_to_unmap_anon(page, 0, migration);
+ ret = try_to_unmap_anon(page, flags);
else
- ret = try_to_unmap_file(page, 0, migration);
+ ret = try_to_unmap_file(page, flags);
if (ret != SWAP_MLOCK && !page_mapped(page))
ret = SWAP_SUCCESS;
return ret;
VM_BUG_ON(!PageLocked(page) || PageLRU(page));
if (PageAnon(page))
- return try_to_unmap_anon(page, 1, 0);
+ return try_to_unmap_anon(page, TTU_MUNLOCK);
else
- return try_to_unmap_file(page, 1, 0);
+ return try_to_unmap_file(page, TTU_MUNLOCK);
}
* sync from ever calling shmem_writepage; but a stacking filesystem
* may use the ->writepage of its underlying filesystem, in which case
* tmpfs should write out to swap only in response to memory pressure,
- * and not for pdflush or sync. However, in those cases, we do still
- * want to check if there's a redundant swappage to be discarded.
+ * and not for the writeback threads or sync. However, in those cases,
+ * we do still want to check if there's a redundant swappage to be
+ * discarded.
*/
if (wbc->for_reclaim)
swap = get_swap_page();
if (pos + copied > inode->i_size)
i_size_write(inode, pos + copied);
- unlock_page(page);
set_page_dirty(page);
+ unlock_page(page);
page_cache_release(page);
return copied;
iput(inode);
return error;
}
- unlock_page(page);
inode->i_mapping->a_ops = &shmem_aops;
inode->i_op = &shmem_symlink_inode_operations;
kaddr = kmap_atomic(page, KM_USER0);
memcpy(kaddr, symname, len);
kunmap_atomic(kaddr, KM_USER0);
set_page_dirty(page);
+ unlock_page(page);
page_cache_release(page);
}
if (dir->i_mode & S_ISGID)
.write_end = shmem_write_end,
#endif
.migratepage = migrate_page,
+ .error_remove_page = generic_error_remove_page,
};
static const struct file_operations shmem_file_operations = {
struct swap_info_struct *p;
struct page *page = NULL;
- if (is_migration_entry(entry))
+ if (non_swap_entry(entry))
return 1;
p = swap_info_get(entry);
int count;
bool has_cache;
- if (is_migration_entry(entry))
+ if (non_swap_entry(entry))
return -EINVAL;
type = swp_type(entry);
* its lock, b) when a concurrent invalidate_mapping_pages got there first and
* c) when tmpfs swizzles a page between a tmpfs inode and swapper_space.
*/
-static void
+static int
truncate_complete_page(struct address_space *mapping, struct page *page)
{
if (page->mapping != mapping)
- return;
+ return -EIO;
if (page_has_private(page))
do_invalidatepage(page, 0);
remove_from_page_cache(page);
ClearPageMappedToDisk(page);
page_cache_release(page); /* pagecache ref */
+ return 0;
}
/*
return ret;
}
+int truncate_inode_page(struct address_space *mapping, struct page *page)
+{
+ if (page_mapped(page)) {
+ unmap_mapping_range(mapping,
+ (loff_t)page->index << PAGE_CACHE_SHIFT,
+ PAGE_CACHE_SIZE, 0);
+ }
+ return truncate_complete_page(mapping, page);
+}
+
+/*
+ * Used to get rid of pages on hardware memory corruption.
+ */
+int generic_error_remove_page(struct address_space *mapping, struct page *page)
+{
+ if (!mapping)
+ return -EINVAL;
+ /*
+ * Only punch for normal data pages for now.
+ * Handling other types like directories would need more auditing.
+ */
+ if (!S_ISREG(mapping->host->i_mode))
+ return -EIO;
+ return truncate_inode_page(mapping, page);
+}
+EXPORT_SYMBOL(generic_error_remove_page);
+
+/*
+ * Safely invalidate one page from its pagecache mapping.
+ * It only drops clean, unused pages. The page must be locked.
+ *
+ * Returns 1 if the page is successfully invalidated, otherwise 0.
+ */
+int invalidate_inode_page(struct page *page)
+{
+ struct address_space *mapping = page_mapping(page);
+ if (!mapping)
+ return 0;
+ if (PageDirty(page) || PageWriteback(page))
+ return 0;
+ if (page_mapped(page))
+ return 0;
+ return invalidate_complete_page(mapping, page);
+}
+
/**
* truncate_inode_pages - truncate range of pages specified by start & end byte offsets
* @mapping: mapping to truncate
unlock_page(page);
continue;
}
- if (page_mapped(page)) {
- unmap_mapping_range(mapping,
- (loff_t)page_index<<PAGE_CACHE_SHIFT,
- PAGE_CACHE_SIZE, 0);
- }
- truncate_complete_page(mapping, page);
+ truncate_inode_page(mapping, page);
unlock_page(page);
}
pagevec_release(&pvec);
break;
lock_page(page);
wait_on_page_writeback(page);
- if (page_mapped(page)) {
- unmap_mapping_range(mapping,
- (loff_t)page->index<<PAGE_CACHE_SHIFT,
- PAGE_CACHE_SIZE, 0);
- }
+ truncate_inode_page(mapping, page);
if (page->index > next)
next = page->index;
next++;
- truncate_complete_page(mapping, page);
unlock_page(page);
}
pagevec_release(&pvec);
if (lock_failed)
continue;
- if (PageDirty(page) || PageWriteback(page))
- goto unlock;
- if (page_mapped(page))
- goto unlock;
- ret += invalidate_complete_page(mapping, page);
-unlock:
+ ret += invalidate_inode_page(page);
+
unlock_page(page);
if (next > end)
break;
return invalidate_inode_pages2_range(mapping, 0, -1);
}
EXPORT_SYMBOL_GPL(invalidate_inode_pages2);
+
+/**
+ * truncate_pagecache - unmap and remove pagecache that has been truncated
+ * @inode: inode
+ * @old: old file offset
+ * @new: new file offset
+ *
+ * inode's new i_size must already be written before truncate_pagecache
+ * is called.
+ *
+ * This function should typically be called before the filesystem
+ * releases resources associated with the freed range (eg. deallocates
+ * blocks). This way, pagecache will always stay logically coherent
+ * with on-disk format, and the filesystem would not have to deal with
+ * situations such as writepage being called for a page that has already
+ * had its underlying blocks deallocated.
+ */
+void truncate_pagecache(struct inode *inode, loff_t old, loff_t new)
+{
+ if (new < old) {
+ struct address_space *mapping = inode->i_mapping;
+
+ /*
+ * unmap_mapping_range is called twice, first simply for
+ * efficiency so that truncate_inode_pages does fewer
+ * single-page unmaps. However after this first call, and
+ * before truncate_inode_pages finishes, it is possible for
+ * private pages to be COWed, which remain after
+ * truncate_inode_pages finishes, hence the second
+ * unmap_mapping_range call must be made for correctness.
+ */
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(mapping, new);
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+ }
+}
+EXPORT_SYMBOL(truncate_pagecache);
+
+/**
+ * vmtruncate - unmap mappings "freed" by truncate() syscall
+ * @inode: inode of the file used
+ * @offset: file offset to start truncating
+ *
+ * NOTE! We have to be ready to update the memory sharing
+ * between the file and the memory map for a potential last
+ * incomplete page. Ugly, but necessary.
+ */
+int vmtruncate(struct inode *inode, loff_t offset)
+{
+ loff_t oldsize;
+ int error;
+
+ error = inode_newsize_ok(inode, offset);
+ if (error)
+ return error;
+ oldsize = inode->i_size;
+ i_size_write(inode, offset);
+ truncate_pagecache(inode, oldsize, offset);
+ if (inode->i_op->truncate)
+ inode->i_op->truncate(inode);
+
+ return error;
+}
+EXPORT_SYMBOL(vmtruncate);
* processes. Try to unmap it here.
*/
if (page_mapped(page) && mapping) {
- switch (try_to_unmap(page, 0)) {
+ switch (try_to_unmap(page, TTU_UNMAP)) {
case SWAP_FAIL:
goto activate_locked;
case SWAP_AGAIN:
*
* If the caller is !__GFP_FS then the probability of a failure is reasonably
* high - the zone may be full of dirty or under-writeback pages, which this
- * caller can't do much about. We kick pdflush and take explicit naps in the
- * hope that some of these pages can be written. But if the allocating task
- * holds filesystem locks which prevent writeout this might not work, and the
- * allocation attempt will fail.
+ * caller can't do much about. We kick the writeback threads and take explicit
+ * naps in the hope that some of these pages can be written. But if the
+ * allocating task holds filesystem locks which prevent writeout this might not
+ * work, and the allocation attempt will fail.
*
* returns: 0, if no pages reclaimed
* else, the number of pages reclaimed
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap,
+ unsigned int swappiness,
+ struct zone *zone, int nid)
+{
+ struct scan_control sc = {
+ .may_writepage = !laptop_mode,
+ .may_unmap = 1,
+ .may_swap = !noswap,
+ .swap_cluster_max = SWAP_CLUSTER_MAX,
+ .swappiness = swappiness,
+ .order = 0,
+ .mem_cgroup = mem,
+ .isolate_pages = mem_cgroup_isolate_pages,
+ };
+ nodemask_t nm = nodemask_of_node(nid);
+
+ sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
+ (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
+ sc.nodemask = &nm;
+ sc.nr_reclaimed = 0;
+ sc.nr_scanned = 0;
+ /*
+ * NOTE: Although we can get the priority field, using it
+ * here is not a good idea, since it limits the pages we can scan.
+ * if we don't reclaim here, the shrink_zone from balance_pgdat
+ * will pick up pages from other mem cgroup's as well. We hack
+ * the priority and make it zero.
+ */
+ shrink_zone(0, zone, &sc);
+ return sc.nr_reclaimed;
+}
+
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
gfp_t gfp_mask,
bool noswap,
unsigned int swappiness)
{
+ struct zonelist *zonelist;
struct scan_control sc = {
.may_writepage = !laptop_mode,
.may_unmap = 1,
.isolate_pages = mem_cgroup_isolate_pages,
.nodemask = NULL, /* we don't care the placement */
};
- struct zonelist *zonelist;
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
for (i = 0; i <= end_zone; i++) {
struct zone *zone = pgdat->node_zones + i;
int nr_slab;
+ int nid, zid;
if (!populated_zone(zone))
continue;
temp_priority[i] = priority;
sc.nr_scanned = 0;
note_zone_scanning_priority(zone, priority);
+
+ nid = pgdat->node_id;
+ zid = zone_idx(zone);
+ /*
+ * Call soft limit reclaim before calling shrink_zone.
+ * For now we ignore the return value
+ */
+ mem_cgroup_soft_limit_reclaim(zone, order, sc.gfp_mask,
+ nid, zid);
/*
* We put equal pressure on every zone, unless one
* zone has way too many pages free already.
unsigned long scan_unevictable_pages;
int scan_unevictable_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
- proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
+ proc_doulongvec_minmax(table, write, buffer, length, ppos);
if (write && *(unsigned long *)table->data)
scan_all_zones_unevictable_pages();
ax25_dev *ax25_dev;
ax25_cb *ax25;
unsigned int k;
+ int ret = 0;
if (copy_from_user(&ax25_ctl, arg, sizeof(ax25_ctl)))
return -EFAULT;
case AX25_WINDOW:
if (ax25->modulus == AX25_MODULUS) {
if (ax25_ctl.arg < 1 || ax25_ctl.arg > 7)
- return -EINVAL;
+ goto einval_put;
} else {
if (ax25_ctl.arg < 1 || ax25_ctl.arg > 63)
- return -EINVAL;
+ goto einval_put;
}
ax25->window = ax25_ctl.arg;
break;
case AX25_T1:
if (ax25_ctl.arg < 1)
- return -EINVAL;
+ goto einval_put;
ax25->rtt = (ax25_ctl.arg * HZ) / 2;
ax25->t1 = ax25_ctl.arg * HZ;
break;
case AX25_T2:
if (ax25_ctl.arg < 1)
- return -EINVAL;
+ goto einval_put;
ax25->t2 = ax25_ctl.arg * HZ;
break;
case AX25_N2:
if (ax25_ctl.arg < 1 || ax25_ctl.arg > 31)
- return -EINVAL;
+ goto einval_put;
ax25->n2count = 0;
ax25->n2 = ax25_ctl.arg;
break;
case AX25_T3:
if (ax25_ctl.arg < 0)
- return -EINVAL;
+ goto einval_put;
ax25->t3 = ax25_ctl.arg * HZ;
break;
case AX25_IDLE:
if (ax25_ctl.arg < 0)
- return -EINVAL;
+ goto einval_put;
ax25->idle = ax25_ctl.arg * 60 * HZ;
break;
case AX25_PACLEN:
if (ax25_ctl.arg < 16 || ax25_ctl.arg > 65535)
- return -EINVAL;
+ goto einval_put;
ax25->paclen = ax25_ctl.arg;
break;
default:
- return -EINVAL;
+ goto einval_put;
}
- return 0;
+out_put:
+ ax25_cb_put(ax25);
+ return ret;
+
+einval_put:
+ ret = -EINVAL;
+ goto out_put;
}
static void ax25_fillin_cb_from_dev(ax25_cb *ax25, ax25_dev *ax25_dev)
ax25_info.idletimer = ax25_display_timer(&ax25->idletimer) / (60 * HZ);
ax25_info.n2count = ax25->n2count;
ax25_info.state = ax25->state;
- ax25_info.rcv_q = sk_wmem_alloc_get(sk);
- ax25_info.snd_q = sk_rmem_alloc_get(sk);
+ ax25_info.rcv_q = sk_rmem_alloc_get(sk);
+ ax25_info.snd_q = sk_wmem_alloc_get(sk);
ax25_info.vs = ax25->vs;
ax25_info.vr = ax25->vr;
ax25_info.va = ax25->va;
#ifdef CONFIG_SYSCTL
static
-int brnf_sysctl_call_tables(ctl_table * ctl, int write, struct file *filp,
+int brnf_sysctl_call_tables(ctl_table * ctl, int write,
void __user * buffer, size_t * lenp, loff_t * ppos)
{
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write && *(int *)(ctl->data))
*(int *)(ctl->data) = 1;
#define F_QUEUE_MAP_CPU (1<<14) /* queue map mirrors smp_processor_id() */
/* Thread control flag bits */
-#define T_TERMINATE (1<<0)
-#define T_STOP (1<<1) /* Stop run */
-#define T_RUN (1<<2) /* Start run */
-#define T_REMDEVALL (1<<3) /* Remove all devs */
-#define T_REMDEV (1<<4) /* Remove one dev */
+#define T_STOP (1<<0) /* Stop run */
+#define T_RUN (1<<1) /* Start run */
+#define T_REMDEVALL (1<<2) /* Remove all devs */
+#define T_REMDEV (1<<3) /* Remove one dev */
/* If lock -- can be removed after some work */
#define if_lock(t) spin_lock(&(t->if_lock));
static void spin(struct pktgen_dev *pkt_dev, ktime_t spin_until)
{
- ktime_t start;
+ ktime_t start_time, end_time;
s32 remaining;
struct hrtimer_sleeper t;
if (remaining <= 0)
return;
- start = ktime_now();
+ start_time = ktime_now();
if (remaining < 100)
udelay(remaining); /* really small just spin */
else {
} while (t.task && pkt_dev->running && !signal_pending(current));
__set_current_state(TASK_RUNNING);
}
- pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), start));
+ end_time = ktime_now();
+
+ pkt_dev->idle_acc += ktime_to_ns(ktime_sub(end_time, start_time));
+ pkt_dev->next_tx = ktime_add_ns(end_time, pkt_dev->delay);
}
static inline void set_pkt_overhead(struct pktgen_dev *pkt_dev)
mutex_unlock(&pktgen_thread_lock);
}
-static void idle(struct pktgen_dev *pkt_dev)
+static void pktgen_resched(struct pktgen_dev *pkt_dev)
{
ktime_t idle_start = ktime_now();
+ schedule();
+ pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), idle_start));
+}
- if (need_resched())
- schedule();
- else
- cpu_relax();
+static void pktgen_wait_for_skb(struct pktgen_dev *pkt_dev)
+{
+ ktime_t idle_start = ktime_now();
+ while (atomic_read(&(pkt_dev->skb->users)) != 1) {
+ if (signal_pending(current))
+ break;
+
+ if (need_resched())
+ pktgen_resched(pkt_dev);
+ else
+ cpu_relax();
+ }
pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), idle_start));
}
-
static void pktgen_xmit(struct pktgen_dev *pkt_dev)
{
struct net_device *odev = pkt_dev->odev;
u16 queue_map;
int ret;
- if (pkt_dev->delay) {
- spin(pkt_dev, pkt_dev->next_tx);
-
- /* This is max DELAY, this has special meaning of
- * "never transmit"
- */
- if (pkt_dev->delay == ULLONG_MAX) {
- pkt_dev->next_tx = ktime_add_ns(ktime_now(), ULONG_MAX);
- return;
- }
- }
-
- if (!pkt_dev->skb) {
- set_cur_queue_map(pkt_dev);
- queue_map = pkt_dev->cur_queue_map;
- } else {
- queue_map = skb_get_queue_mapping(pkt_dev->skb);
+ /* If device is offline, then don't send */
+ if (unlikely(!netif_running(odev) || !netif_carrier_ok(odev))) {
+ pktgen_stop_device(pkt_dev);
+ return;
}
- txq = netdev_get_tx_queue(odev, queue_map);
- /* Did we saturate the queue already? */
- if (netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)) {
- /* If device is down, then all queues are permnantly frozen */
- if (netif_running(odev))
- idle(pkt_dev);
- else
- pktgen_stop_device(pkt_dev);
+ /* This is max DELAY, this has special meaning of
+ * "never transmit"
+ */
+ if (unlikely(pkt_dev->delay == ULLONG_MAX)) {
+ pkt_dev->next_tx = ktime_add_ns(ktime_now(), ULONG_MAX);
return;
}
+ /* If no skb or clone count exhausted then get new one */
if (!pkt_dev->skb || (pkt_dev->last_ok &&
++pkt_dev->clone_count >= pkt_dev->clone_skb)) {
/* build a new pkt */
pkt_dev->clone_count = 0; /* reset counter */
}
- /* fill_packet() might have changed the queue */
+ if (pkt_dev->delay && pkt_dev->last_ok)
+ spin(pkt_dev, pkt_dev->next_tx);
+
queue_map = skb_get_queue_mapping(pkt_dev->skb);
txq = netdev_get_tx_queue(odev, queue_map);
__netif_tx_lock_bh(txq);
- if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)))
- pkt_dev->last_ok = 0;
- else {
- atomic_inc(&(pkt_dev->skb->users));
+ atomic_inc(&(pkt_dev->skb->users));
- retry_now:
+ if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)))
+ ret = NETDEV_TX_BUSY;
+ else
ret = (*xmit)(pkt_dev->skb, odev);
- switch (ret) {
- case NETDEV_TX_OK:
- txq_trans_update(txq);
- pkt_dev->last_ok = 1;
- pkt_dev->sofar++;
- pkt_dev->seq_num++;
- pkt_dev->tx_bytes += pkt_dev->cur_pkt_size;
- break;
- case NETDEV_TX_LOCKED:
- cpu_relax();
- goto retry_now;
- default: /* Drivers are not supposed to return other values! */
- if (net_ratelimit())
- pr_info("pktgen: %s xmit error: %d\n",
- odev->name, ret);
- pkt_dev->errors++;
- /* fallthru */
- case NETDEV_TX_BUSY:
- /* Retry it next time */
- atomic_dec(&(pkt_dev->skb->users));
- pkt_dev->last_ok = 0;
- }
-
- if (pkt_dev->delay)
- pkt_dev->next_tx = ktime_add_ns(ktime_now(),
- pkt_dev->delay);
+
+ switch (ret) {
+ case NETDEV_TX_OK:
+ txq_trans_update(txq);
+ pkt_dev->last_ok = 1;
+ pkt_dev->sofar++;
+ pkt_dev->seq_num++;
+ pkt_dev->tx_bytes += pkt_dev->cur_pkt_size;
+ break;
+ default: /* Drivers are not supposed to return other values! */
+ if (net_ratelimit())
+ pr_info("pktgen: %s xmit error: %d\n",
+ odev->name, ret);
+ pkt_dev->errors++;
+ /* fallthru */
+ case NETDEV_TX_LOCKED:
+ case NETDEV_TX_BUSY:
+ /* Retry it next time */
+ atomic_dec(&(pkt_dev->skb->users));
+ pkt_dev->last_ok = 0;
}
__netif_tx_unlock_bh(txq);
/* If pkt_dev->count is zero, then run forever */
if ((pkt_dev->count != 0) && (pkt_dev->sofar >= pkt_dev->count)) {
- while (atomic_read(&(pkt_dev->skb->users)) != 1) {
- if (signal_pending(current))
- break;
- idle(pkt_dev);
- }
+ pktgen_wait_for_skb(pkt_dev);
/* Done with this */
pktgen_stop_device(pkt_dev);
while (!kthread_should_stop()) {
pkt_dev = next_to_run(t);
- if (!pkt_dev &&
- (t->control & (T_STOP | T_RUN | T_REMDEVALL | T_REMDEV))
- == 0) {
- prepare_to_wait(&(t->queue), &wait,
- TASK_INTERRUPTIBLE);
- schedule_timeout(HZ / 10);
- finish_wait(&(t->queue), &wait);
+ if (unlikely(!pkt_dev && t->control == 0)) {
+ wait_event_interruptible_timeout(t->queue,
+ t->control != 0,
+ HZ/10);
+ continue;
}
__set_current_state(TASK_RUNNING);
- if (pkt_dev)
+ if (likely(pkt_dev)) {
pktgen_xmit(pkt_dev);
+ if (need_resched())
+ pktgen_resched(pkt_dev);
+ else
+ cpu_relax();
+ }
+
if (t->control & T_STOP) {
pktgen_stop(t);
t->control &= ~(T_STOP);
static int min_priority[1];
static int max_priority[] = { 127 }; /* From DECnet spec */
-static int dn_forwarding_proc(ctl_table *, int, struct file *,
+static int dn_forwarding_proc(ctl_table *, int,
void __user *, size_t *, loff_t *);
static int dn_forwarding_sysctl(ctl_table *table,
void __user *oldval, size_t __user *oldlenp,
}
static int dn_forwarding_proc(ctl_table *table, int write,
- struct file *filep,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
dn_db = dev->dn_ptr;
old = dn_db->parms.forwarding;
- err = proc_dointvec(table, write, filep, buffer, lenp, ppos);
+ err = proc_dointvec(table, write, buffer, lenp, ppos);
if ((err >= 0) && write) {
if (dn_db->parms.forwarding < 0)
}
static int dn_node_address_handler(ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
static int dn_def_dev_handler(ctl_table *table, int write,
- struct file * filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
}
static int devinet_conf_proc(ctl_table *ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write) {
struct ipv4_devconf *cnf = ctl->extra1;
}
static int devinet_sysctl_forward(ctl_table *ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
- int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write && *valp != val) {
struct net *net = ctl->extra2;
}
int ipv4_doint_and_flush(ctl_table *ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
- int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
struct net *net = ctl->extra2;
if (write && *valp != val)
solution, but it supposes maintaing new variable in ALL
skb, even if no tunneling is used.
- Current solution: t->recursion lock breaks dead loops. It looks
- like dev->tbusy flag, but I preferred new variable, because
- the semantics is different. One day, when hard_start_xmit
- will be multithreaded we will have to use skb->encapsulation.
+ Current solution: HARD_TX_LOCK lock breaks dead loops.
__be32 dst;
int mtu;
- if (tunnel->recursion++) {
- stats->collisions++;
- goto tx_error;
- }
-
if (dev->type == ARPHRD_ETHER)
IPCB(skb)->flags = 0;
ip_rt_put(rt);
stats->tx_dropped++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
if (skb->sk)
nf_reset(skb);
IPTUNNEL_XMIT();
- tunnel->recursion--;
return NETDEV_TX_OK;
tx_error_icmp:
tx_error:
stats->tx_errors++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
* Check the arguments are allowable
*/
+ if (optlen < sizeof(struct in_addr))
+ goto e_inval;
+
err = -EFAULT;
if (optlen >= sizeof(struct ip_mreqn)) {
if (copy_from_user(&mreq, optval, sizeof(mreq)))
__be32 dst = tiph->daddr;
int mtu;
- if (tunnel->recursion++) {
- stats->collisions++;
- goto tx_error;
- }
-
if (skb->protocol != htons(ETH_P_IP))
goto tx_error;
ip_rt_put(rt);
stats->tx_dropped++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
if (skb->sk)
nf_reset(skb);
IPTUNNEL_XMIT();
- tunnel->recursion--;
return NETDEV_TX_OK;
tx_error_icmp:
tx_error:
stats->tx_errors++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
#ifdef CONFIG_SYSCTL
static int ipv4_sysctl_rtcache_flush(ctl_table *__ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
if (write) {
memcpy(&ctl, __ctl, sizeof(ctl));
ctl.data = &flush_delay;
- proc_dointvec(&ctl, write, filp, buffer, lenp, ppos);
+ proc_dointvec(&ctl, write, buffer, lenp, ppos);
net = (struct net *)__ctl->extra1;
rt_cache_flush(net, flush_delay);
}
static int ipv4_sysctl_rt_secret_interval(ctl_table *ctl, int write,
- struct file *filp,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int old = ip_rt_secret_interval;
- int ret = proc_dointvec_jiffies(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_jiffies(ctl, write, buffer, lenp, ppos);
rt_secret_reschedule(old);
}
/* Validate changes from /proc interface. */
-static int ipv4_local_port_range(ctl_table *table, int write, struct file *filp,
+static int ipv4_local_port_range(ctl_table *table, int write,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
};
inet_get_local_port_range(range, range + 1);
- ret = proc_dointvec_minmax(&tmp, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
if (write && ret == 0) {
if (range[1] < range[0])
}
-static int proc_tcp_congestion_control(ctl_table *ctl, int write, struct file * filp,
+static int proc_tcp_congestion_control(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char val[TCP_CA_NAME_MAX];
tcp_get_default_congestion_control(val);
- ret = proc_dostring(&tbl, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
if (write && ret == 0)
ret = tcp_set_default_congestion_control(val);
return ret;
}
static int proc_tcp_available_congestion_control(ctl_table *ctl,
- int write, struct file * filp,
+ int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
if (!tbl.data)
return -ENOMEM;
tcp_get_available_congestion_control(tbl.data, TCP_CA_BUF_MAX);
- ret = proc_dostring(&tbl, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
kfree(tbl.data);
return ret;
}
static int proc_allowed_congestion_control(ctl_table *ctl,
- int write, struct file * filp,
+ int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
return -ENOMEM;
tcp_get_allowed_congestion_control(tbl.data, tbl.maxlen);
- ret = proc_dostring(&tbl, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
if (write && ret == 0)
ret = tcp_set_allowed_congestion_control(tbl.data);
kfree(tbl.data);
#ifdef CONFIG_SYSCTL
static
-int addrconf_sysctl_forward(ctl_table *ctl, int write, struct file * filp,
+int addrconf_sysctl_forward(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_fixup_forwarding(ctl, valp, val);
}
static
-int addrconf_sysctl_disable(ctl_table *ctl, int write, struct file * filp,
+int addrconf_sysctl_disable(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_disable_ipv6(ctl, valp, val);
struct net_device_stats *stats = &t->dev->stats;
int ret;
- if (t->recursion++) {
- stats->collisions++;
- goto tx_err;
- }
-
switch (skb->protocol) {
case htons(ETH_P_IP):
ret = ip4ip6_tnl_xmit(skb, dev);
if (ret < 0)
goto tx_err;
- t->recursion--;
return NETDEV_TX_OK;
tx_err:
stats->tx_errors++;
stats->tx_dropped++;
kfree_skb(skb);
- t->recursion--;
return NETDEV_TX_OK;
}
}
}
-int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, struct file * filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct net_device *dev = ctl->extra1;
struct inet6_dev *idev;
ndisc_warn_deprecated_sysctl(ctl, "syscall", dev ? dev->name : "default");
if (strcmp(ctl->procname, "retrans_time") == 0)
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
else if (strcmp(ctl->procname, "base_reachable_time") == 0)
ret = proc_dointvec_jiffies(ctl, write,
- filp, buffer, lenp, ppos);
+ buffer, lenp, ppos);
else if ((strcmp(ctl->procname, "retrans_time_ms") == 0) ||
(strcmp(ctl->procname, "base_reachable_time_ms") == 0))
ret = proc_dointvec_ms_jiffies(ctl, write,
- filp, buffer, lenp, ppos);
+ buffer, lenp, ppos);
else
ret = -1;
#ifdef CONFIG_SYSCTL
static
-int ipv6_sysctl_rtcache_flush(ctl_table *ctl, int write, struct file * filp,
+int ipv6_sysctl_rtcache_flush(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct net *net = current->nsproxy->net_ns;
int delay = net->ipv6.sysctl.flush_delay;
if (write) {
- proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ proc_dointvec(ctl, write, buffer, lenp, ppos);
fib6_run_gc(delay <= 0 ? ~0UL : (unsigned long)delay, net);
return 0;
} else
struct in6_addr *addr6;
int addr_type;
- if (tunnel->recursion++) {
- stats->collisions++;
- goto tx_error;
- }
-
if (skb->protocol != htons(ETH_P_IPV6))
goto tx_error;
ip_rt_put(rt);
stats->tx_dropped++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
if (skb->sk)
nf_reset(skb);
IPTUNNEL_XMIT();
- tunnel->recursion--;
return NETDEV_TX_OK;
tx_error_icmp:
tx_error:
stats->tx_errors++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
/* For other sysctl, I've no idea of the range. Maybe Dag could help
* us on that - Jean II */
-static int do_devname(ctl_table *table, int write, struct file *filp,
+static int do_devname(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_dostring(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(table, write, buffer, lenp, ppos);
if (ret == 0 && write) {
struct ias_value *val;
}
-static int do_discovery(ctl_table *table, int write, struct file *filp,
+static int do_discovery(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret)
return ret;
bss->dtim_period = tim_ie->dtim_period;
}
- /* set default value for buggy APs */
- if (!elems->tim || bss->dtim_period == 0)
+ /* set default value for buggy AP/no TIM element */
+ if (bss->dtim_period == 0)
bss->dtim_period = 1;
bss->supp_rates_len = 0;
static int
-proc_do_defense_mode(ctl_table *table, int write, struct file * filp,
+proc_do_defense_mode(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = table->data;
int val = *valp;
int rc;
- rc = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec(table, write, buffer, lenp, ppos);
if (write && (*valp != val)) {
if ((*valp < 0) || (*valp > 3)) {
/* Restore the correct value */
static int
-proc_do_sync_threshold(ctl_table *table, int write, struct file *filp,
+proc_do_sync_threshold(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = table->data;
/* backup the value first */
memcpy(val, valp, sizeof(val));
- rc = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec(table, write, buffer, lenp, ppos);
if (write && (valp[0] < 0 || valp[1] < 0 || valp[0] >= valp[1])) {
/* Restore the correct value */
memcpy(valp, val, sizeof(val));
static struct ctl_table nf_log_sysctl_table[NFPROTO_NUMPROTO+1];
static struct ctl_table_header *nf_log_dir_header;
-static int nf_log_proc_dostring(ctl_table *table, int write, struct file *filp,
+static int nf_log_proc_dostring(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
const struct nf_logger *logger;
table->data = "NONE";
else
table->data = logger->name;
- r = proc_dostring(table, write, filp, buffer, lenp, ppos);
+ r = proc_dostring(table, write, buffer, lenp, ppos);
mutex_unlock(&nf_log_mutex);
}
return err;
}
+void __netlink_clear_multicast_users(struct sock *ksk, unsigned int group)
+{
+ struct sock *sk;
+ struct hlist_node *node;
+ struct netlink_table *tbl = &nl_table[ksk->sk_protocol];
+
+ sk_for_each_bound(sk, node, &tbl->mc_list)
+ netlink_update_socket_mc(nlk_sk(sk), group, 0);
+}
+
/**
* netlink_clear_multicast_users - kick off multicast listeners
*
*/
void netlink_clear_multicast_users(struct sock *ksk, unsigned int group)
{
- struct sock *sk;
- struct hlist_node *node;
- struct netlink_table *tbl = &nl_table[ksk->sk_protocol];
-
netlink_table_grab();
-
- sk_for_each_bound(sk, node, &tbl->mc_list)
- netlink_update_socket_mc(nlk_sk(sk), group, 0);
-
+ __netlink_clear_multicast_users(ksk, group);
netlink_table_ungrab();
}
struct net *net;
BUG_ON(grp->family != family);
+ netlink_table_grab();
rcu_read_lock();
for_each_net_rcu(net)
- netlink_clear_multicast_users(net->genl_sock, grp->id);
+ __netlink_clear_multicast_users(net->genl_sock, grp->id);
rcu_read_unlock();
+ netlink_table_ungrab();
clear_bit(grp->id, mc_groups);
list_del(&grp->list);
goto drop;
}
+ /* Broadcast sending is not implemented */
+ if (pn_addr(dst) == PNADDR_BROADCAST) {
+ err = -EOPNOTSUPP;
+ goto drop;
+ }
+
skb_reset_transport_header(skb);
WARN_ON(skb_headroom(skb) & 1); /* HW assumes word alignment */
skb_push(skb, sizeof(struct phonethdr));
}
EXPORT_SYMBOL(pn_sock_unhash);
+static DEFINE_MUTEX(port_mutex);
+
static int pn_socket_bind(struct socket *sock, struct sockaddr *addr, int len)
{
struct sock *sk = sock->sk;
err = -EINVAL; /* attempt to rebind */
goto out;
}
+ WARN_ON(sk_hashed(sk));
+ mutex_lock(&port_mutex);
err = sk->sk_prot->get_port(sk, pn_port(handle));
if (err)
- goto out;
+ goto out_port;
/* get_port() sets the port, bind() sets the address if applicable */
pn->sobject = pn_object(saddr, pn_port(pn->sobject));
/* Enable RX on the socket */
sk->sk_prot->hash(sk);
+out_port:
+ mutex_unlock(&port_mutex);
out:
release_sock(sk);
return err;
};
EXPORT_SYMBOL(phonet_stream_ops);
-static DEFINE_MUTEX(port_mutex);
-
/* allocate port for a socket */
int pn_sock_get_port(struct sock *sk, unsigned short sport)
{
memset(&try_sa, 0, sizeof(struct sockaddr_pn));
try_sa.spn_family = AF_PHONET;
-
- mutex_lock(&port_mutex);
-
+ WARN_ON(!mutex_is_locked(&port_mutex));
if (!sport) {
/* search free port */
int port, pmin, pmax;
else
sock_put(tmpsk);
}
- mutex_unlock(&port_mutex);
-
/* the port must be in use already */
return -EADDRINUSE;
} while (read_seqretry(&local_port_range_lock, seq));
}
-static int proc_local_port_range(ctl_table *table, int write, struct file *filp,
+static int proc_local_port_range(ctl_table *table, int write,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
.extra2 = &local_port_range_max,
};
- ret = proc_dointvec_minmax(&tmp, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
if (write && ret == 0) {
if (range[1] < range[0])
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/utsname.h>
#include <linux/sunrpc/clnt.h>
#ifdef RPC_DEBUG
/**
* rpc_run_bc_task - Allocate a new RPC task for backchannel use, then run
* rpc_execute against it
- * @ops: RPC call ops
+ * @req: RPC request
+ * @tk_ops: RPC call ops
*/
struct rpc_task *rpc_run_bc_task(struct rpc_rqst *req,
- const struct rpc_call_ops *tk_ops)
+ const struct rpc_call_ops *tk_ops)
{
struct rpc_task *task;
struct xdr_buf *xbufp = &req->rq_snd_buf;
/**
* rpc_create_client_dir - Create a new rpc_client directory in rpc_pipefs
- * @path: path from the rpc_pipefs root to the new directory
+ * @dentry: dentry from the rpc_pipefs root to the new directory
+ * @name: &struct qstr for the name
* @rpc_client: rpc client to associate with this directory
*
* This creates a directory at the given @path associated with
}
}
-static int proc_do_xprt(ctl_table *table, int write, struct file *file,
+static int proc_do_xprt(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char tmpbuf[256];
}
static int
-proc_dodebug(ctl_table *table, int write, struct file *file,
+proc_dodebug(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char tmpbuf[20], c, *s;
* current value.
*/
static int read_reset_stat(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
atomic_t *stat = (atomic_t *)table->data;
dprintk("RPC: xs_close xprt %p\n", xprt);
xs_reset_transport(transport);
+ xprt->reestablish_timeout = 0;
smp_mb__before_clear_bit();
clear_bit(XPRT_CONNECTION_ABORT, &xprt->state);
if (xprt->shutdown)
goto out;
+ /* Any data means we had a useful conversation, so
+ * the we don't need to delay the next reconnect
+ */
+ if (xprt->reestablish_timeout)
+ xprt->reestablish_timeout = 0;
+
/* We use rd_desc to pass struct xprt to xs_tcp_data_recv */
rd_desc.arg.data = xprt;
do {
&transport->connect_worker,
xprt->reestablish_timeout);
xprt->reestablish_timeout <<= 1;
+ if (xprt->reestablish_timeout < XS_TCP_INIT_REEST_TO)
+ xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO;
if (xprt->reestablish_timeout > XS_TCP_MAX_REEST_TO)
xprt->reestablish_timeout = XS_TCP_MAX_REEST_TO;
} else {
wdev->wext.connect.ie = wdev->wext.ie;
wdev->wext.connect.ie_len = wdev->wext.ie_len;
- wdev->wext.connect.privacy = wdev->wext.default_key != -1;
if (wdev->wext.keys) {
wdev->wext.keys->def = wdev->wext.default_key;
wdev->wext.keys->defmgmt = wdev->wext.default_mgmt_key;
+ wdev->wext.connect.privacy = true;
}
if (!wdev->wext.connect.ssid_len)
# is automatically cleaned up.
try-run = $(shell set -e; \
TMP="$(TMPOUT).$$$$.tmp"; \
+ TMPO="$(TMPOUT).$$$$.o"; \
if ($(1)) >/dev/null 2>&1; \
then echo "$(2)"; \
else echo "$(3)"; \
fi; \
- rm -f "$$TMP")
+ rm -f "$$TMP" "$$TMPO")
# as-option
# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
cc-option = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
# cc-option-yn
# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
cc-option-yn = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
# cc-option-align
# Prefix align with either -falign or -malign
# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3))
+# cc-ldoption
+# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both)
+cc-ldoption = $(call try-run,\
+ $(CC) $(1) -nostdlib -xc /dev/null -o "$$TMP",$(1),$(2))
+
# ld-option
-# Usage: ldflags += $(call ld-option, -Wl$(comma)--hash-style=both)
+# Usage: LDFLAGS += $(call ld-option, -X)
ld-option = $(call try-run,\
- $(CC) $(1) -nostdlib -xc /dev/null -o "$$TMP",$(1),$(2))
+ $(CC) /dev/null -c -o "$$TMPO" ; $(LD) $(1) "$$TMPO" -o "$$TMP",$(1),$(2))
######
endif
ifdef CONFIG_FTRACE_MCOUNT_RECORD
-cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
+cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
"$(if $(CONFIG_64BIT),64,32)" \
"$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
"$(if $(part-of-module),1,0)" "$(@)";
$(call echo-cmd,checksrc) $(cmd_checksrc) \
$(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
$(cmd_modversions) \
+ $(call echo-cmd,record_mcount) \
$(cmd_record_mcount) \
scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
$(dot-target).tmp; \
# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds_S = LDS $@
- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $<
+ cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
+ -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
$(obj)/%.lds: $(src)/%.lds.S FORCE
$(call if_changed_dep,cpp_lds_S)
static char *srctree, *kernsrctree;
-void usage (void)
+static void usage (void)
{
fprintf(stderr, "Usage: docproc {doc|depend} file\n");
fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n");
/*
* Execute kernel-doc with parameters given in svec
*/
-void exec_kernel_doc(char **svec)
+static void exec_kernel_doc(char **svec)
{
pid_t pid;
int ret;
struct symfile symfilelist[MAXFILES];
int symfilecnt = 0;
-void add_new_symbol(struct symfile *sym, char * symname)
+static void add_new_symbol(struct symfile *sym, char * symname)
{
sym->symbollist =
realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *));
}
/* Add a filename to the list */
-struct symfile * add_new_file(char * filename)
+static struct symfile * add_new_file(char * filename)
{
symfilelist[symfilecnt++].filename = strdup(filename);
return &symfilelist[symfilecnt - 1];
}
/* Check if file already are present in the list */
-struct symfile * filename_exist(char * filename)
+static struct symfile * filename_exist(char * filename)
{
int i;
for (i=0; i < symfilecnt; i++)
* List all files referenced within the template file.
* Files are separated by tabs.
*/
-void adddep(char * file) { printf("\t%s", file); }
-void adddep2(char * file, char * line) { line = line; adddep(file); }
-void noaction(char * line) { line = line; }
-void noaction2(char * file, char * line) { file = file; line = line; }
+static void adddep(char * file) { printf("\t%s", file); }
+static void adddep2(char * file, char * line) { line = line; adddep(file); }
+static void noaction(char * line) { line = line; }
+static void noaction2(char * file, char * line) { file = file; line = line; }
/* Echo the line without further action */
-void printline(char * line) { printf("%s", line); }
+static void printline(char * line) { printf("%s", line); }
/*
* Find all symbols in filename that are exported with EXPORT_SYMBOL &
* EXPORT_SYMBOL_GPL (& EXPORT_SYMBOL_GPL_FUTURE implicitly).
* All symbols located are stored in symfilelist.
*/
-void find_export_symbols(char * filename)
+static void find_export_symbols(char * filename)
{
FILE * fp;
struct symfile *sym;
* intfunc uses -nofunction
* extfunc uses -function
*/
-void docfunctions(char * filename, char * type)
+static void docfunctions(char * filename, char * type)
{
int i,j;
int symcnt = 0;
fflush(stdout);
free(vec);
}
-void intfunc(char * filename) { docfunctions(filename, NOFUNCTION); }
-void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
+static void intfunc(char * filename) { docfunctions(filename, NOFUNCTION); }
+static void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
/*
* Document specific function(s) in a file.
* Call kernel-doc with the following parameters:
* kernel-doc -docbook -function function1 [-function function2]
*/
-void singfunc(char * filename, char * line)
+static void singfunc(char * filename, char * line)
{
char *vec[200]; /* Enough for specific functions */
int i, idx = 0;
* Call kernel-doc with the following parameters:
* kernel-doc -docbook -function "doc section" filename
*/
-void docsect(char *filename, char *line)
+static void docsect(char *filename, char *line)
{
char *vec[6]; /* kerneldoc -docbook -function "section" file NULL */
char *s;
* 5) Lines containing !P
* 6) Default lines - lines not matching the above
*/
-void parse_file(FILE *infile)
+static void parse_file(FILE *infile)
{
char line[MAXLINESZ];
char * s;
char *depfile;
char *cmdline;
-void usage(void)
+static void usage(void)
{
fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
exit(1);
/*
* Print out the commandline prefixed with cmd_<target filename> :=
*/
-void print_cmdline(void)
+static void print_cmdline(void)
{
printf("cmd_%s := %s\n\n", target, cmdline);
}
* Grow the configuration string to a desired length.
* Usually the first growth is plenty.
*/
-void grow_config(int len)
+static void grow_config(int len)
{
while (len_config + len > size_config) {
if (size_config == 0)
/*
* Lookup a value in the configuration string.
*/
-int is_defined_config(const char * name, int len)
+static int is_defined_config(const char * name, int len)
{
const char * pconfig;
const char * plast = str_config + len_config - len;
/*
* Add a new value to the configuration string.
*/
-void define_config(const char * name, int len)
+static void define_config(const char * name, int len)
{
grow_config(len + 1);
/*
* Clear the set of configuration strings.
*/
-void clear_config(void)
+static void clear_config(void)
{
len_config = 0;
define_config("", 0);
/*
* Record the use of a CONFIG_* word.
*/
-void use_config(char *m, int slen)
+static void use_config(char *m, int slen)
{
char s[PATH_MAX];
char *p;
printf(" $(wildcard include/config/%s.h) \\\n", s);
}
-void parse_config_file(char *map, size_t len)
+static void parse_config_file(char *map, size_t len)
{
int *end = (int *) (map + len);
/* start at +1, so that p can never be < map */
}
/* test is s ends in sub */
-int strrcmp(char *s, char *sub)
+static int strrcmp(char *s, char *sub)
{
int slen = strlen(s);
int sublen = strlen(sub);
return memcmp(s + slen - sublen, sub, sublen);
}
-void do_config_file(char *filename)
+static void do_config_file(char *filename)
{
struct stat st;
int fd;
close(fd);
}
-void parse_dep_file(void *map, size_t len)
+static void parse_dep_file(void *map, size_t len)
{
char *m = map;
char *end = m + len;
printf("$(deps_%s):\n", target);
}
-void print_deps(void)
+static void print_deps(void)
{
struct stat st;
int fd;
close(fd);
}
-void traps(void)
+static void traps(void)
{
static char test[] __attribute__((aligned(sizeof(int)))) = "CONF";
int *p = (int *)test;
* http://www.cse.yorku.ca/~oz/hash.html
*/
-unsigned int djb2_hash(char *str)
+static unsigned int djb2_hash(char *str)
{
unsigned long hash = 5381;
int c;
return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1));
}
-unsigned int r5_hash(char *str)
+static unsigned int r5_hash(char *str)
{
unsigned long hash = 0;
int c;
#!/usr/bin/perl
#
-# checkincludes: Find files included more than once in (other) files.
+# checkincludes: find/remove files included more than once
+#
# Copyright abandoned, 2000, Niels Kristian Bech Jensen <nkbj@image.dk>.
+# Copyright 2009 Luis R. Rodriguez <mcgrof@gmail.com>
+#
+# This script checks for duplicate includes. It also has support
+# to remove them in place. Note that this will not take into
+# consideration macros so you should run this only if you know
+# you do have real dups and do not have them under #ifdef's. You
+# could also just review the results.
+
+sub usage {
+ print "Usage: checkincludes.pl [-r]\n";
+ print "By default we just warn of duplicates\n";
+ print "To remove duplicated includes in place use -r\n";
+ exit 1;
+}
+
+my $remove = 0;
+
+if ($#ARGV < 0) {
+ usage();
+}
+
+if ($#ARGV >= 1) {
+ if ($ARGV[0] =~ /^-/) {
+ if ($ARGV[0] eq "-r") {
+ $remove = 1;
+ shift;
+ } else {
+ usage();
+ }
+ }
+}
foreach $file (@ARGV) {
open(FILE, $file) or die "Cannot open $file: $!.\n";
my %includedfiles = ();
+ my @file_lines = ();
while (<FILE>) {
if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
++$includedfiles{$1};
}
+ push(@file_lines, $_);
}
-
- foreach $filename (keys %includedfiles) {
- if ($includedfiles{$filename} > 1) {
- print "$file: $filename is included more than once.\n";
+
+ close(FILE);
+
+ if (!$remove) {
+ foreach $filename (keys %includedfiles) {
+ if ($includedfiles{$filename} > 1) {
+ print "$file: $filename is included more than once.\n";
+ }
}
+ next;
}
+ open(FILE,">$file") || die("Cannot write to $file: $!");
+
+ my $dups = 0;
+ foreach (@file_lines) {
+ if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
+ foreach $filename (keys %includedfiles) {
+ if ($1 eq $filename) {
+ if ($includedfiles{$filename} > 1) {
+ $includedfiles{$filename}--;
+ $dups++;
+ } else {
+ print FILE $_;
+ }
+ }
+ }
+ } else {
+ print FILE $_;
+ }
+ }
+ if ($dups > 0) {
+ print "$file: removed $dups duplicate includes\n";
+ }
close(FILE);
}
static char line[128];
static struct menu *rootEntry;
-static char nohelp_text[] = N_("Sorry, no help available for this option yet.\n");
-
-static const char *get_help(struct menu *menu)
+static void print_help(struct menu *menu)
{
- if (menu_has_help(menu))
- return _(menu_get_help(menu));
- else
- return nohelp_text;
+ struct gstr help = str_new();
+
+ menu_get_ext_help(menu, &help);
+
+ printf("\n%s\n", str_get(&help));
+ str_free(&help);
}
static void strip(char *str)
return 1;
}
-int conf_string(struct menu *menu)
+static int conf_string(struct menu *menu)
{
struct symbol *sym = menu->sym;
const char *def;
case '?':
/* print help */
if (line[1] == '\n') {
- printf("\n%s\n", get_help(menu));
+ print_help(menu);
def = NULL;
break;
}
if (sym_set_tristate_value(sym, newval))
return 0;
help:
- printf("\n%s\n", get_help(menu));
+ print_help(menu);
}
}
fgets(line, 128, stdin);
strip(line);
if (line[0] == '?') {
- printf("\n%s\n", get_help(menu));
+ print_help(menu);
continue;
}
if (!line[0])
if (!child)
continue;
if (line[strlen(line) - 1] == '?') {
- printf("\n%s\n", get_help(child));
+ print_help(child);
continue;
}
sym_set_choice_value(sym, child->sym);
return 0;
}
-int conf_split_config(void)
+static int conf_split_config(void)
{
const char *name;
char path[128];
/*
* e1 || e2 -> ?
*/
-struct expr *expr_join_or(struct expr *e1, struct expr *e2)
+static struct expr *expr_join_or(struct expr *e1, struct expr *e2)
{
struct expr *tmp;
struct symbol *sym1, *sym2;
return NULL;
}
-struct expr *expr_join_and(struct expr *e1, struct expr *e2)
+static struct expr *expr_join_and(struct expr *e1, struct expr *e2)
{
struct expr *tmp;
struct symbol *sym1, *sym2;
static void expr_print_gstr_helper(void *data, struct symbol *sym, const char *str)
{
str_append((struct gstr*)data, str);
+ if (sym)
+ str_printf((struct gstr*)data, " [=%s]", sym_get_string_value(sym));
}
void expr_gstr_print(struct expr *e, struct gstr *gs)
GtkTextBuffer *buffer;
GtkTextIter start, end;
const char *prompt = _(menu_get_prompt(menu));
- gchar *name;
- const char *help;
+ struct gstr help = str_new();
- help = menu_get_help(menu);
-
- /* Gettextize if the help text not empty */
- if ((help != 0) && (help[0] != 0))
- help = _(help);
-
- if (menu->sym && menu->sym->name)
- name = g_strdup_printf(menu->sym->name);
- else
- name = g_strdup("");
+ menu_get_ext_help(menu, &help);
buffer = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w));
gtk_text_buffer_get_bounds(buffer, &start, &end);
gtk_text_buffer_get_end_iter(buffer, &end);
gtk_text_buffer_insert_with_tags(buffer, &end, prompt, -1, tag1,
NULL);
- gtk_text_buffer_insert_at_cursor(buffer, " ", 1);
- gtk_text_buffer_get_end_iter(buffer, &end);
- gtk_text_buffer_insert_with_tags(buffer, &end, name, -1, tag1,
- NULL);
gtk_text_buffer_insert_at_cursor(buffer, "\n\n", 2);
gtk_text_buffer_get_end_iter(buffer, &end);
- gtk_text_buffer_insert_with_tags(buffer, &end, help, -1, tag2,
+ gtk_text_buffer_insert_with_tags(buffer, &end, str_get(&help), -1, tag2,
NULL);
+ str_free(&help);
}
<property name="headers_visible">True</property>
<property name="rules_hint">False</property>
<property name="reorderable">False</property>
- <property name="enable_search">True</property>
+ <property name="enable_search">False</property>
<signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:58:22 GMT"/>
<signal name="button_press_event" handler="on_treeview1_button_press_event" last_modification_time="Sun, 12 Jan 2003 16:03:52 GMT"/>
<signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 16:11:44 GMT"/>
<property name="headers_visible">True</property>
<property name="rules_hint">False</property>
<property name="reorderable">False</property>
- <property name="enable_search">True</property>
+ <property name="enable_search">False</property>
<signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:57:55 GMT"/>
<signal name="button_press_event" handler="on_treeview2_button_press_event" last_modification_time="Sun, 12 Jan 2003 15:57:58 GMT"/>
<signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 15:58:01 GMT"/>
return rc;
}
-void menu_build_message_list(struct menu *menu)
+static void menu_build_message_list(struct menu *menu)
{
struct menu *child;
"msgstr \"\"\n", self->msg);
}
-void menu__xgettext(void)
+static void menu__xgettext(void)
{
struct message *m = message__list;
P(menu_get_parent_menu,struct menu *,(struct menu *menu));
P(menu_has_help,bool,(struct menu *menu));
P(menu_get_help,const char *,(struct menu *menu));
+P(get_symbol_str,void,(struct gstr *r, struct symbol *sym));
+P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help));
/* symbol.c */
P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]);
setmod_text[] = N_(
"This feature depends on another which has been configured as a module.\n"
"As a result, this feature will be built as a module."),
-nohelp_text[] = N_(
- "There is no help available for this kernel option.\n"),
load_config_text[] = N_(
"Enter the name of the configuration file you wish to load. "
"Accept the name shown to restore the configuration you "
static void show_helptext(const char *title, const char *text);
static void show_help(struct menu *menu);
-static void get_prompt_str(struct gstr *r, struct property *prop)
-{
- int i, j;
- struct menu *submenu[8], *menu;
-
- str_printf(r, _("Prompt: %s\n"), _(prop->text));
- str_printf(r, _(" Defined at %s:%d\n"), prop->menu->file->name,
- prop->menu->lineno);
- if (!expr_is_yes(prop->visible.expr)) {
- str_append(r, _(" Depends on: "));
- expr_gstr_print(prop->visible.expr, r);
- str_append(r, "\n");
- }
- menu = prop->menu->parent;
- for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent)
- submenu[i++] = menu;
- if (i > 0) {
- str_printf(r, _(" Location:\n"));
- for (j = 4; --i >= 0; j += 2) {
- menu = submenu[i];
- str_printf(r, "%*c-> %s", j, ' ', _(menu_get_prompt(menu)));
- if (menu->sym) {
- str_printf(r, " (%s [=%s])", menu->sym->name ?
- menu->sym->name : _("<choice>"),
- sym_get_string_value(menu->sym));
- }
- str_append(r, "\n");
- }
- }
-}
-
-static void get_symbol_str(struct gstr *r, struct symbol *sym)
-{
- bool hit;
- struct property *prop;
-
- if (sym && sym->name)
- str_printf(r, "Symbol: %s [=%s]\n", sym->name,
- sym_get_string_value(sym));
- for_all_prompts(sym, prop)
- get_prompt_str(r, prop);
- hit = false;
- for_all_properties(sym, prop, P_SELECT) {
- if (!hit) {
- str_append(r, " Selects: ");
- hit = true;
- } else
- str_printf(r, " && ");
- expr_gstr_print(prop->expr, r);
- }
- if (hit)
- str_append(r, "\n");
- if (sym->rev_dep.expr) {
- str_append(r, _(" Selected by: "));
- expr_gstr_print(sym->rev_dep.expr, r);
- str_append(r, "\n");
- }
- str_append(r, "\n\n");
-}
-
static struct gstr get_relations_str(struct symbol **sym_arr)
{
struct symbol *sym;
static void show_help(struct menu *menu)
{
struct gstr help = str_new();
- struct symbol *sym = menu->sym;
-
- if (menu_has_help(menu))
- {
- if (sym->name) {
- str_printf(&help, "CONFIG_%s:\n\n", sym->name);
- str_append(&help, _(menu_get_help(menu)));
- str_append(&help, "\n");
- }
- } else {
- str_append(&help, nohelp_text);
- }
- get_symbol_str(&help, sym);
+
+ menu_get_ext_help(menu, &help);
+
show_helptext(_(menu_get_prompt(menu)), str_get(&help));
str_free(&help);
}
#define LKC_DIRECT_LINK
#include "lkc.h"
+static const char nohelp_text[] = N_(
+ "There is no help available for this kernel option.\n");
+
struct menu rootmenu;
static struct menu **last_entry_ptr;
current_menu = current_menu->parent;
}
-struct expr *menu_check_dep(struct expr *e)
+static struct expr *menu_check_dep(struct expr *e)
{
if (!e)
return e;
(sym2->type == S_UNKNOWN && sym_string_valid(sym, sym2->name));
}
-void sym_check_prop(struct symbol *sym)
+static void sym_check_prop(struct symbol *sym)
{
struct property *prop;
struct symbol *sym2;
else
return "";
}
+
+static void get_prompt_str(struct gstr *r, struct property *prop)
+{
+ int i, j;
+ struct menu *submenu[8], *menu;
+
+ str_printf(r, _("Prompt: %s\n"), _(prop->text));
+ str_printf(r, _(" Defined at %s:%d\n"), prop->menu->file->name,
+ prop->menu->lineno);
+ if (!expr_is_yes(prop->visible.expr)) {
+ str_append(r, _(" Depends on: "));
+ expr_gstr_print(prop->visible.expr, r);
+ str_append(r, "\n");
+ }
+ menu = prop->menu->parent;
+ for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent)
+ submenu[i++] = menu;
+ if (i > 0) {
+ str_printf(r, _(" Location:\n"));
+ for (j = 4; --i >= 0; j += 2) {
+ menu = submenu[i];
+ str_printf(r, "%*c-> %s", j, ' ', _(menu_get_prompt(menu)));
+ if (menu->sym) {
+ str_printf(r, " (%s [=%s])", menu->sym->name ?
+ menu->sym->name : _("<choice>"),
+ sym_get_string_value(menu->sym));
+ }
+ str_append(r, "\n");
+ }
+ }
+}
+
+void get_symbol_str(struct gstr *r, struct symbol *sym)
+{
+ bool hit;
+ struct property *prop;
+
+ if (sym && sym->name)
+ str_printf(r, "Symbol: %s [=%s]\n", sym->name,
+ sym_get_string_value(sym));
+ for_all_prompts(sym, prop)
+ get_prompt_str(r, prop);
+ hit = false;
+ for_all_properties(sym, prop, P_SELECT) {
+ if (!hit) {
+ str_append(r, " Selects: ");
+ hit = true;
+ } else
+ str_printf(r, " && ");
+ expr_gstr_print(prop->expr, r);
+ }
+ if (hit)
+ str_append(r, "\n");
+ if (sym->rev_dep.expr) {
+ str_append(r, _(" Selected by: "));
+ expr_gstr_print(sym->rev_dep.expr, r);
+ str_append(r, "\n");
+ }
+ str_append(r, "\n\n");
+}
+
+void menu_get_ext_help(struct menu *menu, struct gstr *help)
+{
+ struct symbol *sym = menu->sym;
+
+ if (menu_has_help(menu)) {
+ if (sym->name) {
+ str_printf(help, "CONFIG_%s:\n\n", sym->name);
+ str_append(help, _(menu_get_help(menu)));
+ str_append(help, "\n");
+ }
+ } else {
+ str_append(help, nohelp_text);
+ }
+ if (sym)
+ get_symbol_str(help, sym);
+}
if (showDebug())
debug = debug_info(sym);
- help = menu_get_help(menu);
- /* Gettextize if the help text not empty */
- if (help.isEmpty())
- help = print_filter(menu_get_help(menu));
- else
- help = print_filter(_(menu_get_help(menu)));
+ struct gstr help_gstr = str_new();
+ menu_get_ext_help(menu, &help_gstr);
+ help = print_filter(str_get(&help_gstr));
+ str_free(&help_gstr);
} else if (menu->prompt) {
head += "<big><b>";
head += print_filter(_(menu->prompt->text));
struct expr *sym_env_list;
-void sym_add_default(struct symbol *sym, const char *def)
+static void sym_add_default(struct symbol *sym, const char *def)
{
struct property *prop = prop_alloc(P_DEFAULT, sym);
return NULL;
}
-struct property *sym_get_range_prop(struct symbol *sym)
+static struct property *sym_get_range_prop(struct symbol *sym)
{
struct property *prop;
return "unknown";
}
-void prop_add_env(const char *env)
+static void prop_add_env(const char *env)
{
struct symbol *sym, *sym2;
struct property *prop;
# if it's a module, we need to find the .ko file and calculate a load offset
if ($module ne "") {
- my $dir = dirname($filename);
- $dir = $dir . "/";
- my $mod = $module . ".ko";
- my $modulefile = `find $dir -name $mod | head -1`;
+ my $modulefile = `modinfo $module | grep '^filename:' | awk '{ print \$2 }'`;
chomp($modulefile);
$filename = $modulefile;
if ($filename eq "") {
-I ____cacheline_aligned_in_smp \
-I ____cacheline_internodealigned_in_smp \
-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
- --extra=+f --c-kinds=+px \
+ -I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
+ --extra=+f --c-kinds=-px \
--regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
--regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
struct cgroup_subsys devices_subsys;
static int devcgroup_can_attach(struct cgroup_subsys *ss,
- struct cgroup *new_cgroup, struct task_struct *task)
+ struct cgroup *new_cgroup, struct task_struct *task,
+ bool threadgroup)
{
if (current != task && !capable(CAP_SYS_ADMIN))
return -EPERM;
/* trawl through the keys looking for keyrings */
for (;;) {
- if (key->expiry > now && key->expiry < new_timer) {
+ if (key->expiry > limit && key->expiry < new_timer) {
kdebug("will expire %x in %ld",
- key_serial(key), key->expiry - now);
+ key_serial(key), key->expiry - limit);
new_timer = key->expiry;
}
char *name1, char *name2)
{
if (!ipv6_addr_any(addr))
- audit_log_format(ab, " %s=%pI6", name1, addr);
+ audit_log_format(ab, " %s=%pI6c", name1, addr);
if (port)
audit_log_format(ab, " %s=%d", name2, ntohs(port));
}
* sysctl handler which just sets dac_mmap_min_addr = the new value and then
* calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly
*/
-int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+int mmap_min_addr_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
update_mmap_min_addr();
void avc_disable(void)
{
- avc_flush();
- synchronize_rcu();
- if (avc_node_cachep)
- kmem_cache_destroy(avc_node_cachep);
+ /*
+ * If you are looking at this because you have realized that we are
+ * not destroying the avc_node_cachep it might be easy to fix, but
+ * I don't know the memory barrier semantics well enough to know. It's
+ * possible that some other task dereferenced security_ops when
+ * it still pointed to selinux operations. If that is the case it's
+ * possible that it is about to use the avc and is about to need the
+ * avc_node_cachep. I know I could wrap the security.c security_ops call
+ * in an rcu_lock, but seriously, it's not worth it. Instead I just flush
+ * the cache and get that memory back.
+ */
+ if (avc_node_cachep) {
+ avc_flush();
+ /* kmem_cache_destroy(avc_node_cachep); */
+ }
}
/* Wake up the parent if it is waiting so that it can recheck
* wait permission to the new task SID. */
read_lock(&tasklist_lock);
- wake_up_interruptible(¤t->real_parent->signal->wait_chldexit);
+ __wake_up_parent(current, current->real_parent);
read_unlock(&tasklist_lock);
}
return 0;
}
-static int pxa2xx_ac97_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_ac97_suspend(struct device *dev)
{
- struct snd_card *card = platform_get_drvdata(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
int ret = 0;
if (card)
return ret;
}
-static int pxa2xx_ac97_resume(struct platform_device *dev)
+static int pxa2xx_ac97_resume(struct device *dev)
{
- struct snd_card *card = platform_get_drvdata(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
int ret = 0;
if (card)
return ret;
}
-#else
-#define pxa2xx_ac97_suspend NULL
-#define pxa2xx_ac97_resume NULL
+static struct dev_pm_ops pxa2xx_ac97_pm_ops = {
+ .suspend = pxa2xx_ac97_suspend,
+ .resume = pxa2xx_ac97_resume,
+};
#endif
static int __devinit pxa2xx_ac97_probe(struct platform_device *dev)
static struct platform_driver pxa2xx_ac97_driver = {
.probe = pxa2xx_ac97_probe,
.remove = __devexit_p(pxa2xx_ac97_remove),
- .suspend = pxa2xx_ac97_suspend,
- .resume = pxa2xx_ac97_resume,
.driver = {
.name = "pxa2xx-ac97",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pxa2xx_ac97_pm_ops,
+#endif
},
};
gen_init_cpio
initramfs_data.cpio
initramfs_data.cpio.gz
+initramfs_data.cpio.bz2
+initramfs_data.cpio.lzma
initramfs_list
include
PHONY += klibcdirs
-# Gzip, but no bzip2
+# Gzip
suffix_$(CONFIG_INITRAMFS_COMPRESSION_GZIP) = .gz
# Bzip2
bool called = true;
struct kvm_vcpu *vcpu;
- if (alloc_cpumask_var(&cpus, GFP_ATOMIC))
- cpumask_clear(cpus);
+ zalloc_cpumask_var(&cpus, GFP_ATOMIC);
spin_lock(&kvm->requests_lock);
me = smp_processor_id();
projects / firefly-linux-kernel-4.4.55.git / commitdiff