[PATCH] ARM: decompressor: use platform debug macros
authorRussell King <rmk@dyn-67.arm.linux.org.uk>
Tue, 3 May 2005 11:18:46 +0000 (12:18 +0100)
committerRussell King <rmk@dyn-67.arm.linux.org.uk>
Tue, 3 May 2005 11:18:46 +0000 (12:18 +0100)
Rather than duplicate the assembly for debug macros in the
decompressor head.S, use asm/arch/debug-macros.S instead.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
arch/arm/boot/compressed/head.S

index c0e7aff3dec2254272cedd5009a183532940708b..7c7f475e213ea3f85779165679e06feb1aea7109 100644 (file)
  * Please select one of the following when turning on debugging.
  */
 #ifdef DEBUG
-#if defined(CONFIG_DEBUG_DC21285_PORT)
-               .macro  loadsp, rb
-               mov     \rb, #0x42000000
-               .endm
-               .macro  writeb, rb
-               str     \rb, [r3, #0x160]
-               .endm
-#elif defined(CONFIG_DEBUG_ICEDCC)
+
+#include <asm/arch/debug-macro.S>
+
+#if defined(CONFIG_DEBUG_ICEDCC)
                .macro  loadsp, rb
                .endm
-               .macro writeb, rb
-               mcr     p14, 0, \rb, c0, c1, 0
-               .endm
-#elif defined(CONFIG_FOOTBRIDGE)
-               .macro  loadsp, rb
-               mov     \rb, #0x7c000000
+               .macro writeb, ch, rb
+               mcr     p14, 0, \ch, c0, c1, 0
                .endm
-               .macro  writeb, rb
-               strb    \rb, [r3, #0x3f8]
+#else
+               .macro  writeb, ch, rb
+               senduart \ch, \rb
                .endm
-#elif defined(CONFIG_ARCH_RPC)
+
+#if defined(CONFIG_FOOTBRIDGE) || \
+    defined(CONFIG_ARCH_RPC) || \
+    defined(CONFIG_ARCH_INTEGRATOR) || \
+    defined(CONFIG_ARCH_PXA) || \
+    defined(CONFIG_ARCH_IXP4XX) || \
+    defined(CONFIG_ARCH_IXP2000) || \
+    defined(CONFIG_ARCH_LH7A40X) || \
+    defined(CONFIG_ARCH_OMAP)
                .macro  loadsp, rb
-               mov     \rb, #0x03000000
-               orr     \rb, \rb, #0x00010000
-               .endm
-               .macro  writeb, rb
-               strb    \rb, [r3, #0x3f8 << 2]
-               .endm
-#elif defined(CONFIG_ARCH_INTEGRATOR)
-               .macro  loadsp, rb
-               mov     \rb, #0x16000000
-               .endm
-               .macro  writeb, rb
-               strb    \rb, [r3, #0]
-               .endm
-#elif defined(CONFIG_ARCH_PXA) /* Xscale-type */
-               .macro  loadsp, rb
-               mov     \rb, #0x40000000
-               orr     \rb, \rb, #0x00100000
-               .endm
-               .macro  writeb, rb
-               strb    \rb, [r3, #0]
+               addruart \rb
                .endm
 #elif defined(CONFIG_ARCH_SA1100)
                .macro  loadsp, rb
                add     \rb, \rb, #0x00010000   @ Ser1
 #  endif
                .endm
-               .macro  writeb, rb
-               str     \rb, [r3, #0x14]        @ UTDR
-               .endm
-#elif defined(CONFIG_ARCH_IXP4XX)
-               .macro  loadsp, rb
-               mov     \rb, #0xc8000000
-               .endm
-               .macro  writeb, rb
-               str     \rb, [r3, #0]
-#elif defined(CONFIG_ARCH_IXP2000)
-               .macro  loadsp, rb
-               mov     \rb, #0xc0000000
-               orr     \rb, \rb, #0x00030000
-               .endm
-               .macro  writeb, rb
-               str     \rb, [r3, #0]
-               .endm
-#elif defined(CONFIG_ARCH_LH7A40X)
-               .macro  loadsp, rb
-               ldr     \rb, =0x80000700        @ UART2 UARTBASE
-               .endm
-               .macro  writeb, rb
-               strb    \rb, [r3, #0]
-               .endm
-#elif defined(CONFIG_ARCH_OMAP)
-               .macro  loadsp, rb
-               mov     \rb, #0xff000000        @ physical base address
-               add     \rb, \rb, #0x00fb0000
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-               add     \rb, \rb, #0x00000800
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-               add     \rb, \rb, #0x00009000
-#endif
-               .endm
-               .macro  writeb, rb
-               strb    \rb, [r3]
-               .endm
 #elif defined(CONFIG_ARCH_IOP331)
                .macro loadsp, rb
                 mov    \rb, #0xff000000
                 orr     \rb, \rb, #0x00ff0000
                 orr     \rb, \rb, #0x0000f700   @ location of the UART
                .endm
-               .macro  writeb, rb
-               str     \rb, [r3, #0]
-               .endm
 #elif defined(CONFIG_ARCH_S3C2410)
-                       .macro loadsp, rb
+               .macro loadsp, rb
                mov     \rb, #0x50000000
                add     \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
                .endm
-               .macro  writeb, rb
-               strb    \rb, [r3, #0x20]
-               .endm
 #else
 #error no serial architecture defined
 #endif
+#endif
 #endif
 
                .macro  kputc,val
@@ -734,7 +673,7 @@ puts:               loadsp  r3
 1:             ldrb    r2, [r0], #1
                teq     r2, #0
                moveq   pc, lr
-2:             writeb  r2
+2:             writeb  r2, r3
                mov     r1, #0x00020000
 3:             subs    r1, r1, #1
                bne     3b