[media] au0828: fill tuner type on all boards
authorMauro Carvalho Chehab <m.chehab@samsung.com>
Mon, 18 Aug 2014 11:51:29 +0000 (08:51 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Mon, 22 Sep 2014 20:51:24 +0000 (17:51 -0300)
This is used by the I2C code in order to slow down the
speed to 20 kHz on devices with xc5000 or xc5000c.

So, it needs to be filled for all devices that use either
xc5000 or xc5000c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/usb/au0828/au0828-cards.c

index 9fd3c4b222f6826d0dc1d542f62c7f3bff1a2452..9eb77ac2153b06a60e65c781994901ba12208d6d 100644 (file)
@@ -98,20 +98,20 @@ struct au0828_board au0828_boards[] = {
        },
        [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
                .name   = "Hauppauge HVR950Q rev xxF8",
-               .tuner_type = UNSET,
-               .tuner_addr = ADDR_UNSET,
+               .tuner_type = TUNER_XC5000,
+               .tuner_addr = 0x61,
                .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
        },
        [AU0828_BOARD_DVICO_FUSIONHDTV7] = {
                .name   = "DViCO FusionHDTV USB",
-               .tuner_type = UNSET,
-               .tuner_addr = ADDR_UNSET,
+               .tuner_type = TUNER_XC5000,
+               .tuner_addr = 0x61,
                .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
        },
        [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
                .name = "Hauppauge Woodbury",
-               .tuner_type = UNSET,
-               .tuner_addr = ADDR_UNSET,
+               .tuner_type = TUNER_NXP_TDA18271,
+               .tuner_addr = 0x60,
                .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
        },
 };