err = mmc_select_hs400(card);
if (err)
goto free_card;
- } else if (mmc_card_hs(card)) {
+ } else {
/* Select the desired bus width optionally */
err = mmc_select_bus_width(card);
- if (err > 0) {
- if (!IS_ERR_VALUE(err) && mmc_card_hs(card)) {
++ if (err > 0 && mmc_card_hs(card)) {
err = mmc_select_hs_ddr(card);
if (err)
goto free_card;
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
+#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
+ #define PCI_DEVICE_ID_INTEL_GLK 0x31aa
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
struct dwc3_trb *trb;
struct dwc3_ep *dep;
- int ret;
-
dep = dwc->eps[epnum];
- if (dep->flags & DWC3_EP_BUSY) {
- dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
- return 0;
- }
- trb = &dwc->ep0_trb[dep->free_slot];
+ trb = &dwc->ep0_trb[dep->trb_enqueue];
if (chain)
- dep->free_slot++;
+ dep->trb_enqueue++;
trb->bpl = lower_32_bits(buf_dma);
trb->bph = upper_32_bits(buf_dma);
params.param0 = upper_32_bits(dwc->ep0_trb_addr);
params.param1 = lower_32_bits(dwc->ep0_trb_addr);
- trace_dwc3_prepare_trb(dep, trb);
-
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
- DWC3_DEPCMD_STARTTRANSFER, ¶ms);
+ ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, ¶ms);
if (ret < 0) {
dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
dep->name);
if (req->request.status == -EINPROGRESS)
req->request.status = status;
- if (dwc->ep0_bounced && dep->number == 0)
+ if (dwc->ep0_bounced && dep->number <= 1)
dwc->ep0_bounced = false;
- else
- usb_gadget_unmap_request(&dwc->gadget, &req->request,
- req->direction);
+
+ usb_gadget_unmap_request(&dwc->gadget, &req->request,
+ req->direction);
- dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
- req, dep->name, req->request.actual,
- req->request.length, status);
trace_dwc3_gadget_giveback(req);
spin_unlock(&dwc->lock);
/* For controllers with a broken beyond repair streams implementation */
#define XHCI_BROKEN_STREAMS (1 << 19)
#define XHCI_PME_STUCK_QUIRK (1 << 20)
+#define XHCI_DIS_AUTOSUSPEND (1 << 21)
+ #define XHCI_MISSING_CAS (1 << 24)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */