mmc: sdhci-esdhc-imx: name esdhc specific definitions with ESDHC_ prefix
authorShawn Guo <shawn.guo@linaro.org>
Tue, 15 Jan 2013 15:36:53 +0000 (23:36 +0800)
committerChris Ball <cjb@laptop.org>
Sun, 24 Feb 2013 19:36:58 +0000 (14:36 -0500)
Rename esdhc local definitions with ESDHC_ rather than SDHCI_ prefix,
so that we can distinguish them from SDHCI core definitions from name.

A couple of bit fields are also changed use shift for consistency and
better readability.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
drivers/mmc/host/sdhci-esdhc-imx.c

index 322eabfd61c67d70b33a839f8c1f864fc189d527..6ffd15e7a3b1e9498104fed97b67727061748552 100644 (file)
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
 
-#define        SDHCI_CTRL_D3CD                 0x08
+#define        ESDHC_CTRL_D3CD                 0x08
 /* VENDOR SPEC register */
-#define SDHCI_VENDOR_SPEC              0xC0
-#define  SDHCI_VENDOR_SPEC_SDIO_QUIRK  0x00000002
-#define SDHCI_WTMK_LVL                 0x44
-#define SDHCI_MIX_CTRL                 0x48
+#define ESDHC_VENDOR_SPEC              0xc0
+#define  ESDHC_VENDOR_SPEC_SDIO_QUIRK  (1 << 1)
+#define ESDHC_WTMK_LVL                 0x44
+#define ESDHC_MIX_CTRL                 0x48
 
 /*
  * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC:
@@ -43,7 +43,7 @@
  * but bit28 is used as the INT DMA ERR in fsl eSDHC design.
  * Define this macro DMA error INT for fsl eSDHC
  */
-#define SDHCI_INT_VENDOR_SPEC_DMA_ERR  0x10000000
+#define ESDHC_INT_VENDOR_SPEC_DMA_ERR  (1 << 28)
 
 /*
  * The CMDTYPE of the CMD register (offset 0xE) should be set to
@@ -165,8 +165,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
        }
 
        if (unlikely(reg == SDHCI_INT_STATUS)) {
-               if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) {
-                       val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+               if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
+                       val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
                        val |= SDHCI_INT_ADMA_ERROR;
                }
        }
@@ -192,9 +192,9 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
                         * re-sample it by the following steps.
                         */
                        data = readl(host->ioaddr + SDHCI_HOST_CONTROL);
-                       data &= ~SDHCI_CTRL_D3CD;
+                       data &= ~ESDHC_CTRL_D3CD;
                        writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
-                       data |= SDHCI_CTRL_D3CD;
+                       data |= ESDHC_CTRL_D3CD;
                        writel(data, host->ioaddr + SDHCI_HOST_CONTROL);
                }
        }
@@ -203,15 +203,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
                                && (reg == SDHCI_INT_STATUS)
                                && (val & SDHCI_INT_DATA_END))) {
                        u32 v;
-                       v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
-                       v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
-                       writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+                       v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+                       v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK;
+                       writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
        }
 
        if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) {
                if (val & SDHCI_INT_ADMA_ERROR) {
                        val &= ~SDHCI_INT_ADMA_ERROR;
-                       val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR;
+                       val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR;
                }
        }
 
@@ -253,9 +253,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
                                && (host->cmd->data->blocks > 1)
                                && (host->cmd->data->flags & MMC_DATA_READ)) {
                        u32 v;
-                       v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
-                       v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
-                       writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+                       v = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
+                       v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK;
+                       writel(v, host->ioaddr + ESDHC_VENDOR_SPEC);
                }
                imx_data->scratchpad = val;
                return;
@@ -266,9 +266,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
                        val |= SDHCI_CMD_ABORTCMD;
 
                if (is_imx6q_usdhc(imx_data)) {
-                       u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL);
+                       u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
                        m = imx_data->scratchpad | (m & 0xffff0000);
-                       writel(m, host->ioaddr + SDHCI_MIX_CTRL);
+                       writel(m, host->ioaddr + ESDHC_MIX_CTRL);
                        writel(val << 16,
                               host->ioaddr + SDHCI_TRANSFER_MODE);
                } else {
@@ -487,7 +487,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
         * to something insane.  Change it back here.
         */
        if (is_imx6q_usdhc(imx_data))
-               writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL);
+               writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL);
 
        boarddata = &imx_data->boarddata;
        if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {