Required subnode-properties:
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
- - channel: Channel this key is attached to, mut be 0 or 1.
+ - channel: Channel this key is attached to, must be 0 or 1.
- voltage: Voltage in µV at lradc input when this key is pressed.
Example:
return;
}
+ memset(&db9_parport_cb, 0, sizeof(db9_parport_cb));
db9_parport_cb.flags = PARPORT_FLAG_EXCL;
pd = parport_register_dev_model(pp, "db9", &db9_parport_cb, port_idx);
pads = gc_cfg[port_idx].args + 1;
n_pads = gc_cfg[port_idx].nargs - 1;
+ memset(&gc_parport_cb, 0, sizeof(gc_parport_cb));
gc_parport_cb.flags = PARPORT_FLAG_EXCL;
pd = parport_register_dev_model(pp, "gamecon", &gc_parport_cb,
n_buttons = tgfx_cfg[port_idx].args + 1;
n_devs = tgfx_cfg[port_idx].nargs - 1;
+ memset(&tgfx_parport_cb, 0, sizeof(tgfx_parport_cb));
tgfx_parport_cb.flags = PARPORT_FLAG_EXCL;
pd = parport_register_dev_model(pp, "turbografx", &tgfx_parport_cb,
w->parport = pp;
+ memset(&walkera0701_parport_cb, 0, sizeof(walkera0701_parport_cb));
walkera0701_parport_cb.flags = PARPORT_FLAG_EXCL;
walkera0701_parport_cb.irq_func = walkera0701_irq_handler;
walkera0701_parport_cb.private = w;
ret = regmap_update_bits(arizona->regmap,
ARIZONA_HAPTICS_CONTROL_1,
- ARIZONA_HAP_CTRL_MASK,
- 1 << ARIZONA_HAP_CTRL_SHIFT);
+ ARIZONA_HAP_CTRL_MASK, 0);
if (ret != 0) {
dev_err(arizona->dev, "Failed to stop haptics: %d\n",
ret);
#define DRIVER_NAME "elan_i2c"
#define ELAN_DRIVER_VERSION "1.6.1"
+#define ELAN_VENDOR_ID 0x04f3
#define ETP_MAX_PRESSURE 255
#define ETP_FWIDTH_REDUCE 90
#define ETP_FINGER_WIDTH 15
input->name = "Elan Touchpad";
input->id.bustype = BUS_I2C;
+ input->id.vendor = ELAN_VENDOR_ID;
+ input->id.product = data->product_id;
input_set_drvdata(input, data);
error = input_mt_init_slots(input, ETP_MAX_FINGERS,
{
struct pardev_cb parkbd_parport_cb;
+ memset(&parkbd_parport_cb, 0, sizeof(parkbd_parport_cb));
parkbd_parport_cb.irq_func = parkbd_interrupt;
parkbd_parport_cb.flags = PARPORT_FLAG_EXCL;
input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
+ /* Verify that a device really has an endpoint */
+ if (intf->altsetting[0].desc.bNumEndpoints < 1) {
+ dev_err(&intf->dev,
+ "interface has %d endpoints, but must have minimum 1\n",
+ intf->altsetting[0].desc.bNumEndpoints);
+ err = -EINVAL;
+ goto fail3;
+ }
endpoint = &intf->altsetting[0].endpoint[0].desc;
/* Go set up our URB, which is called when the tablet receives
if (i == ARRAY_SIZE(speeds)) {
dev_info(&intf->dev,
"Aiptek tried all speeds, no sane response\n");
+ err = -EINVAL;
goto fail3;
}
{ }
};
+static unsigned int chromebook_tp_buttons[] = {
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ BTN_LEFT
+};
+
+static struct mxt_acpi_platform_data chromebook_platform_data[] = {
+ {
+ /* Touchpad */
+ .hid = "ATML0000",
+ .pdata = {
+ .t19_num_keys = ARRAY_SIZE(chromebook_tp_buttons),
+ .t19_keymap = chromebook_tp_buttons,
+ },
+ },
+ {
+ /* Touchscreen */
+ .hid = "ATML0001",
+ },
+ { }
+};
+
static const struct dmi_system_id mxt_dmi_table[] = {
{
/* 2015 Google Pixel */
},
.driver_data = samus_platform_data,
},
+ {
+ /* Other Google Chromebooks */
+ .ident = "Chromebook",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+ },
+ .driver_data = chromebook_platform_data,
+ },
{ }
};
{ "qt602240_ts", 0 },
{ "atmel_mxt_ts", 0 },
{ "atmel_mxt_tp", 0 },
+ { "maxtouch", 0 },
{ "mXT224", 0 },
{ }
};
disable_irq(client->irq);
- if (device_may_wakeup(dev) || ts->keep_power_in_suspend) {
+ if (device_may_wakeup(dev)) {
+ /*
+ * The device will automatically enter idle mode
+ * that has reduced power consumption.
+ */
+ ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
+ } else if (ts->keep_power_in_suspend) {
for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
error = elants_i2c_send(client, set_sleep_cmd,
sizeof(set_sleep_cmd));
dev_err(&client->dev,
"suspend command failed: %d\n", error);
}
-
- if (device_may_wakeup(dev))
- ts->wake_irq_enabled =
- (enable_irq_wake(client->irq) == 0);
} else {
elants_i2c_power_off(ts);
}
int retry_cnt;
int error;
- if (device_may_wakeup(dev) && ts->wake_irq_enabled)
- disable_irq_wake(client->irq);
-
- if (ts->keep_power_in_suspend) {
+ if (device_may_wakeup(dev)) {
+ if (ts->wake_irq_enabled)
+ disable_irq_wake(client->irq);
+ elants_i2c_sw_reset(client);
+ } else if (ts->keep_power_in_suspend) {
for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
error = elants_i2c_send(client, set_active_cmd,
sizeof(set_active_cmd));