--- /dev/null
+ STiH407 Overview
+ ================
+
+Introduction
+------------
+
+ The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes
+ and server/connected client application for satellite, cable, terrestrial
+ and IP-STB markets.
+
+ Features
+ - ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
+ - SATA2, USB 3.0, PCIe, Gbit Ethernet
+
+ Document Author
+ ---------------
+
+ Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
- clock-frequency : The frequency of the main counter, in Hz. Optional.
+- always-on : a boolean property. If present, the timer is powered through an
+ always-on power domain, therefore it never loses context.
+
Example:
timer {
Power Management Service Unit(PMSU)
-----------------------------------
-Available on Marvell SOCs: Armada 370 and Armada XP
+Available on Marvell SOCs: Armada 370, Armada 38x and Armada XP
Required properties:
-- compatible: "marvell,armada-370-xp-pmsu"
+- compatible: should be one of:
+ - "marvell,armada-370-pmsu" for Armada 370 or Armada XP
+ - "marvell,armada-380-pmsu" for Armada 38x
+ - "marvell,armada-370-xp-pmsu" was used for Armada 370/XP but is now
+ deprecated and will be removed
-- reg: Should contain PMSU registers location and length. First pair
- for the per-CPU SW Reset Control registers, second pair for the
- Power Management Service Unit.
+- reg: Should contain PMSU registers location and length.
Example:
-armada-370-xp-pmsu@d0022000 {
- compatible = "marvell,armada-370-xp-pmsu";
- reg = <0xd0022100 0x430>,
- <0xd0020800 0x20>;
+armada-370-xp-pmsu@22000 {
+ compatible = "marvell,armada-370-pmsu";
+ reg = <0x22000 0x1000>;
};
--- /dev/null
+Marvell Armada CPU reset controller
+===================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-370-cpu-reset".
+
+- reg: should be register base and length as documented in the
+ datasheet for the CPU reset registers
+
+cpurst: cpurst@20800 {
+ compatible = "marvell,armada-370-cpu-reset";
+ reg = <0x20800 0x20>;
+};
Coherency fabric
----------------
-Available on Marvell SOCs: Armada 370 and Armada XP
+Available on Marvell SOCs: Armada 370, Armada 375, Armada 38x and Armada XP
Required properties:
-- compatible: "marvell,coherency-fabric"
+- compatible: the possible values are:
+
+ * "marvell,coherency-fabric", to be used for the coherency fabric of
+ the Armada 370 and Armada XP.
+
+ * "marvell,armada-375-coherency-fabric", for the Armada 375 coherency
+ fabric.
+
+ * "marvell,armada-380-coherency-fabric", for the Armada 38x coherency
+ fabric.
- reg: Should contain coherency fabric registers location and
- length. First pair for the coherency fabric registers, second pair
- for the per-CPU fabric registers registers.
+ length.
+
+ * For "marvell,coherency-fabric", the first pair for the coherency
+ fabric registers, second pair for the per-CPU fabric registers.
-Example:
+ * For "marvell,armada-375-coherency-fabric", only one pair is needed
+ for the per-CPU fabric registers.
+
+ * For "marvell,armada-380-coherency-fabric", only one pair is needed
+ for the per-CPU fabric registers.
+
+Examples:
coherency-fabric@d0020200 {
compatible = "marvell,coherency-fabric";
};
+coherency-fabric@21810 {
+ compatible = "marvell,armada-375-coherency-fabric";
+ reg = <0x21810 0x1c>;
+};
+
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
+ "marvell,armada-375-smp"
+ "marvell,armada-380-smp"
+ "marvell,armada-xp-smp"
- cpu-release-addr
Usage: required for systems that have an "enable-method"
--- /dev/null
+ST STi Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the ST STiH415 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih415";
+
+Boards with the ST STiH416 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih416";
+
+Boards with the ST STiH407 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih407";
+
* "sata-phy" for the SATA 6.0Gbps PHY
Optional properties:
+- dma-coherent : Present if dma operations are coherent
- status : Shall be "ok" if enabled or "disabled" if disabled.
Default is "ok".
<0x0 0x1f22e000 0x0 0x1000>,
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy2 0>;
<0x0 0x1f23e000 0x0 0x1000>,
<0x0 0x1f237000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sataclk 0>;
phys = <&phy3 0>;
Required properties:
- compatible : shall be one of the following:
+ "atmel,at91sam9x5-sckc":
+ at91 SCKC (Slow Clock Controller)
+ This node contains the slow clock definitions.
+
+ "atmel,at91sam9x5-clk-slow-osc":
+ at91 slow oscillator
+
+ "atmel,at91sam9x5-clk-slow-rc-osc":
+ at91 internal slow RC oscillator
+
"atmel,at91rm9200-pmc" or
"atmel,at91sam9g45-pmc" or
"atmel,at91sam9n12-pmc" or
All at91 specific clocks (clocks defined below) must be child
node of the PMC node.
+ "atmel,at91sam9x5-clk-slow" (under sckc node)
+ or
+ "atmel,at91sam9260-clk-slow" (under pmc node):
+ at91 slow clk
+
+ "atmel,at91rm9200-clk-main-osc"
+ "atmel,at91sam9x5-clk-main-rc-osc"
+ at91 main clk sources
+
+ "atmel,at91sam9x5-clk-main"
"atmel,at91rm9200-clk-main":
- at91 main oscillator
+ at91 main clock
"atmel,at91rm9200-clk-master" or
"atmel,at91sam9x5-clk-master":
"atmel,at91sam9x5-clk-utmi":
at91 utmi clock
+Required properties for SCKC node:
+- reg : defines the IO memory reserved for the SCKC.
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+
+
+For example:
+ sckc: sckc@fffffe50 {
+ compatible = "atmel,sama5d3-pmc";
+ reg = <0xfffffe50 0x4>
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ /* put at91 slow clocks here */
+ };
+
+
+Required properties for internal slow RC oscillator:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-frequency : define the internal RC oscillator frequency.
+
+Optional properties:
+- clock-accuracy : define the internal RC oscillator accuracy.
+
+For example:
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+Required properties for slow oscillator:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+
+Optional properties:
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
+ provided on XIN.
+
+For example:
+ slow_osc: slow_osc {
+ compatible = "atmel,at91rm9200-clk-slow-osc";
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
+ };
+
+Required properties for slow clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the slow clk sources (see atmel datasheet).
+
+For example:
+ clk32k: slck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+
Required properties for PMC node:
- reg : defines the IO memory reserved for the PMC.
- #size-cells : shall be 0 (reg is used to encode clk id).
/* put at91 clocks here */
};
+Required properties for main clock internal RC oscillator:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<0>".
+- clock-frequency : define the internal RC oscillator frequency.
+
+Optional properties:
+- clock-accuracy : define the internal RC oscillator accuracy.
+
+For example:
+ main_rc_osc: main_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+ interrupt-parent = <&pmc>;
+ interrupts = <0>;
+ clock-frequency = <12000000>;
+ clock-accuracy = <50000000>;
+ };
+
+Required properties for main clock oscillator:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<0>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+
+Optional properties:
+- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
+ on XIN.
+
+ clock signal is directly provided on XIN pin.
+
+For example:
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ interrupt-parent = <&pmc>;
+ interrupts = <0>;
+ #clock-cells = <0>;
+ clocks = <&main_xtal>;
+ };
+
Required properties for main clock:
- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
-- clocks (optional if clock-frequency is provided) : shall be the slow clock
- phandle. This clock is used to calculate the main clock rate if
- "clock-frequency" is not provided.
-- clock-frequency : the main oscillator frequency.Prefer the use of
- "clock-frequency" over automatic clock rate calculation.
+- clocks : shall encode the main clk sources (see atmel datasheet).
For example:
main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
+ compatible = "atmel,at91sam9x5-clk-main";
interrupt-parent = <&pmc>;
interrupts = <0>;
#clock-cells = <0>;
- clocks = <&ck32k>;
- clock-frequency = <18432000>;
+ clocks = <&main_rc_osc &main_osc>;
};
Required properties for master clock:
uart5_ipg 124
reserved 125
wdt_ipg 126
+ cko_div 127
+ cko_sel 128
+ cko 129
Examples:
fpm 83
mpll_osc_sel 84
mpll_sel 85
- spll_gate 86
+ spll_gate 86
+ mshc_div 87
+ rtic_ipg_gate 88
+ mshc_ipg_gate 89
+ rtic_ahb_gate 90
+ mshc_baud_gate 91
Examples:
lvds2_sel 205
lvds1_gate 206
lvds2_gate 207
+ esai_ahb 208
Examples:
--- /dev/null
+* Clock bindings for Freescale i.MX6 SoloX
+
+Required properties:
+- compatible: Should be "fsl,imx6sx-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h
+for the full list of i.MX6 SoloX clock IDs.
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
clocks = <&emac_0_clk>;
- clocks-names = "stmmaceth";
+ clock-names = "stmmaceth";
};
- max-frame-size: See ethernet.txt file in the same directory
- clocks: If present, the first clock should be the GMAC main clock,
further clocks may be specified in derived bindings.
-- clocks-names: One name for each entry in the clocks property, the
+- clock-names: One name for each entry in the clocks property, the
first one should be "stmmaceth".
Examples:
reg = <0xfe61f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x5000>;
PIO0: gpio@fe610000 {
interrupt-parent = <&PIO3>;
#interrupt-cells = <2>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */
- interrupts-names = "card-detect";
+ interrupt-names = "card-detect";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc>;
};
reg = <0x100000 0x3000>;
reg-names "mpu";
interrupts = <82>, <83>;
- interrupts-names = "tx", "rx";
+ interrupt-names = "tx", "rx";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
serial-dir = <
"ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
- reg - <int> - I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+ DVDD-supply : power supplies for the device as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
If this node is not mentioned or if the value is unknown, then
micbias is set to 2.0V.
-- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
- DVDD-supply : power supplies for the device as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
CODEC output pins:
* HPL
F: drivers/misc/atmel_tclib.c
F: drivers/clocksource/tcb_clksrc.c
-ATMEL TSADCC DRIVER
-M: Josh Wu <josh.wu@atmel.com>
-L: linux-input@vger.kernel.org
-S: Supported
-F: drivers/input/touchscreen/atmel_tsadcc.c
-
ATMEL USBA UDC DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: drivers/extcon/
F: Documentation/extcon/
+EXYNOS DP DRIVER
+M: Jingoo Han <jg1.han@samsung.com>
+L: dri-devel@lists.freedesktop.org
+S: Maintained
+F: drivers/gpu/drm/exynos/exynos_dp*
+
EXYNOS MIPI DISPLAY DRIVERS
M: Inki Dae <inki.dae@samsung.com>
M: Donghwa Lee <dh09.lee@samsung.com>
F: include/uapi/scsi/fc/
FILE LOCKING (flock() and fcntl()/lockf())
-M: Jeff Layton <jlayton@redhat.com>
+M: Jeff Layton <jlayton@poochiereds.net>
M: J. Bruce Fields <bfields@fieldses.org>
L: linux-fsdevel@vger.kernel.org
S: Maintained
KERNEL VIRTUAL MACHINE (KVM) FOR ARM
M: Christoffer Dall <christoffer.dall@linaro.org>
+M: Marc Zyngier <marc.zyngier@arm.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kvmarm@lists.cs.columbia.edu
W: http://systems.cs.columbia.edu/projects/kvm-arm
S: Supported
F: arch/arm/include/uapi/asm/kvm*
F: arch/arm/include/asm/kvm*
F: arch/arm/kvm/
+F: virt/kvm/arm/
+F: include/kvm/arm_*
KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64)
+M: Christoffer Dall <christoffer.dall@linaro.org>
M: Marc Zyngier <marc.zyngier@arm.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kvmarm@lists.cs.columbia.edu
VERSION = 3
PATCHLEVEL = 15
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
resume_kernel_mode:
-#ifdef CONFIG_PREEMPT
-
- ; This is a must for preempt_schedule_irq()
+ ; Disable Interrupts from this point on
+ ; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
+ ; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
IRQ_DISABLE r9
+#ifdef CONFIG_PREEMPT
+
; Can't preempt if preemption disabled
GET_CURR_THR_INFO_FROM_SP r10
ld r8, [r10, THREAD_INFO_PREEMPT_COUNT]
select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
+ select HAVE_CC_STACKPROTECTOR
select HAVE_CONTEXT_TRACKING
select HAVE_C_RECORDMCOUNT
- select HAVE_CC_STACKPROTECTOR
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
+ select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select IRQ_DOMAIN
- select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
select PINCTRL
select PINCTRL_AT91 if USE_OF
bool "Energy Micro efm32"
depends on !MMU
select ARCH_REQUIRE_GPIOLIB
- select AUTO_ZRELADDR
select ARM_NVIC
+ select AUTO_ZRELADDR
select CLKSRC_OF
select COMMON_CLK
select CPU_V7M
bool "IXP4xx-based"
depends on MMU
select ARCH_HAS_DMA_SET_COHERENT_MASK
- select ARCH_SUPPORTS_BIG_ENDIAN
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select CPU_XSCALE
select DMABOUNCE if PCI
default 8
config IWMMXT
- bool "Enable iWMMXt support" if !CPU_PJ4
- depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
- default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
+ bool "Enable iWMMXt support"
+ depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
+ default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
config BL_SWITCHER
bool "big.LITTLE switcher support"
depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
- select CPU_PM
select ARM_CPU_SUSPEND
+ select CPU_PM
help
The big.LITTLE "switcher" provides the core functionality to
transparently handle transition between a cluster of A15's
depends on CPU_V7 && !CPU_V6
depends on !GENERIC_ATOMIC64
depends on MMU
+ select ARCH_DMA_ADDR_T_64BIT
select ARM_PSCI
select SWIOTLB_XEN
- select ARCH_DMA_ADDR_T_64BIT
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
Say Y here if you want kernel low-level debugging support
on i.MX6SL.
+ config DEBUG_IMX6SX_UART
+ bool "i.MX6SX Debug UART"
+ depends on SOC_IMX6SX
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6SX.
+
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
- DEBUG_IMX6SL_UART
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART
default 1
depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
+config DEBUG_VF_UART_PORT
+ int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
+ default 1
+ range 0 3
+ depends on SOC_VF610
+ help
+ Choose UART port on which kernel low-level debug messages
+ should be output.
+
config DEBUG_TEGRA_UART
bool
depends on ARCH_TEGRA
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
- DEBUG_IMX6SL_UART
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART
default "debug/msm.S" if DEBUG_MSM_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default 0x40100000 if DEBUG_PXA_UART1
default 0x42000000 if ARCH_GEMINI
default 0x7c0003f8 if FOOTBRIDGE
- default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
+ default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xfeb26000 if DEBUG_RK3X_UART1
default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
default 0xfeb31000 if DEBUG_KEYSTONE_UART1
- default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
- default 0xfed60000 if DEBUG_RK29_UART0
- default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
- default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
default 0xfec02000 if DEBUG_SOCFPGA_UART
+ default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
default 0xfed12000 if ARCH_KIRKWOOD
+ default 0xfed60000 if DEBUG_RK29_UART0
+ default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+ default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
default 0xfedc0000 if ARCH_EP93XX
default 0xfee003f8 if FOOTBRIDGE
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
- default 0xfef36000 if DEBUG_HIGHBANK_UART
default 0xfee82340 if ARCH_IOP13XX
default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+ default 0xfef36000 if DEBUG_HIGHBANK_UART
default 0xfefff700 if ARCH_IOP33X
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
bcm21664-garnet.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb
omap3-sbc-t3730.dtb \
omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
+ omap3-beagle-xm-ab.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
omap3-ldp.dtb \
am43x-epos-evm.dtb \
am437x-gp-evm.dtb \
dra7-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
+ orion5x-lacie-ethernet-disk-mini-v2.dtb \
+ orion5x-maxtor-shared-storage-2.dtb \
+ orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-apq8074-dragonboard.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
- ste-hrefprev60-stuib.dtb \
- ste-hrefprev60-tvk.dtb \
- ste-hrefv60plus-stuib.dtb \
- ste-hrefv60plus-tvk.dtb \
- ste-ccu8540.dtb \
- ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
- r7s72100-genmai.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
r7s72100-genmai-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+ ste-hrefprev60-stuib.dtb \
+ ste-hrefprev60-tvk.dtb \
+ ste-hrefv60plus-stuib.dtb \
+ ste-hrefv60plus-tvk.dtb \
+ ste-ccu8540.dtb \
+ ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
versatile-pb.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
&usb {
status = "okay";
- control@44e10000 {
+ control@44e10620 {
status = "okay";
};
dr_mode = "host";
};
- dma-controller@07402000 {
+ dma-controller@47402000 {
status = "okay";
};
};
am335x_evm_audio_pins: am335x_evm_audio_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
&usb {
status = "okay";
- control@44e10000 {
+ control@44e10620 {
status = "okay";
};
dr_mode = "host";
};
- dma-controller@07402000 {
+ dma-controller@47402000 {
status = "okay";
};
};
&usb {
status = "okay";
- control@44e10000 {
+ control@44e10620 {
status = "okay";
};
dr_mode = "host";
};
- dma-controller@07402000 {
+ dma-controller@47402000 {
status = "okay";
};
};
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
- gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
&usb {
status = "okay";
- control@44e10000 {
+ control@44e10620 {
status = "okay";
};
dr_mode = "host";
};
- dma-controller@07402000 {
+ dma-controller@47402000 {
status = "okay";
};
};
};
/*
- * The soc node represents the soc top level view. It is uses for IPs
+ * The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
/*
* XXX: Use a flat representation of the AM33XX interconnect.
- * The real AM33XX interconnect network is quite complex.Since
- * that will not bring real advantage to represent that in DT
+ * The real AM33XX interconnect network is quite complex. Since
+ * it will not bring real advantage to represent that in DT
* for the moment, just use a fake OCP bus entry to represent
* the whole bus hierarchy.
*/
<0x46000000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <80>, <81>;
- interrupts-names = "tx", "rx";
+ interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 8>,
<&edma 9>;
<0x46400000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <82>, <83>;
- interrupts-names = "tx", "rx";
+ interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 10>,
<&edma 11>;
<0x46000000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <80>, <81>;
- interrupts-names = "tx", "rx";
+ interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 8>,
<&edma 9>;
<0x46400000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <82>, <83>;
- interrupts-names = "tx", "rx";
+ interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 10>,
<&edma 11>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x72004 0x4>;
+ clocks = <&gateclk 4>;
};
eth1: ethernet@74000 {
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x72004 0x4>;
+ clocks = <&gateclk 4>;
};
coredivclk: clock@e4250 {
status = "okay";
};
-
- tsadcc: tsadcc@f804c000 {
- status = "okay";
- };
-
rtc@fffffeb0 {
status = "okay";
};
reg = <0x20000000 0x10000000>;
};
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+
ahb {
apb {
mmc0: mmc@f0000000 {
reg = <0x20000000 0x08000000>;
};
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
- clk32k: slck {
+ slow_rc_osc: slow_rc_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9260-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_xtal>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&clk32k>;
+ clocks = <&main_xtal>;
};
plla: pllack {
reg = <0x20000000 0x4000000>;
};
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x20000000 0x04000000>;
};
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
- clk32k: slck {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&clk32k>;
+ clocks = <&main_xtal>;
};
plla: pllack {
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
};
+
+ sckc@fffffd50 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfffffd50 0x4>;
+
+ slow_osc: slow_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-osc";
+ #clock-cells = <0>;
+ atmel,startup-time-usec = <1200000>;
+ clocks = <&slow_xtal>;
+ };
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ #clock-cells = <0>;
+ atmel,startup-time-usec = <75>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+ };
};
};
reg = <0x20000000 0x4000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
};
/*
- * The soc node represents the soc top level view. It is uses for IPs
+ * The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
/*
* XXX: Use a flat representation of the SOC interconnect.
* The real OMAP interconnect network is quite complex.
- * Since that will not bring real advantage to represent that in DT for
+ * Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
- ti,bit-shift = <28>;
+ ti,bit-shift = <24>;
reg = <0x1860>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
};
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <26000000>;
};
};
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
compatible = "denx,imx53-m53evk", "fsl,imx53";
memory {
- reg = <0x70000000 0x20000000>;
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
};
soc {
irq-trigger = <0x1>;
stmpe_touchscreen {
- compatible = "stmpe,ts";
+ compatible = "st,stmpe-ts";
reg = <0>;
- ts,sample-time = <4>;
- ts,mod-12b = <1>;
- ts,ref-sel = <0>;
- ts,adc-freq = <1>;
- ts,ave-ctrl = <3>;
- ts,touch-det-delay = <3>;
- ts,settling = <4>;
- ts,fraction-z = <7>;
- ts,i-drive = <1>;
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <3>;
+ st,touch-det-delay = <3>;
+ st,settling = <4>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
};
};
/ {
memory {
- reg = <0x70000000 0x40000000>;
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
};
display0: display@di0 {
soc {
display: display@di0 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgb24_vga1>;
status = "okay";
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+
display-timings {
VGA {
clock-frequency = <25200000>;
};
};
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
port {
lvds1_in: endpoint {
- remote-endpoint = <&ipu_di0_lvds0>;
+ remote-endpoint = <&ipu_di1_lvds1>;
};
};
};
compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
aliases {
- gpio7 = &stmpe_gpio;
+ gpio7 = &stmpe_gpio1;
+ gpio8 = &stmpe_gpio2;
+ stmpe-i2c0 = &stmpe1;
+ stmpe-i2c1 = &stmpe2;
};
memory {
regulator-always-on;
};
- reg_usb_otg_vbus: regulator@1 {
+ reg_usb_otg_switch: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
- regulator-name = "usb_otg_vbus";
+ regulator-name = "usb_otg_switch";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio7 12 0>;
+ regulator-boot-on;
+ regulator-always-on;
};
reg_usb_host1: regulator@2 {
led-blue {
label = "blue";
- gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
led-green {
label = "green";
- gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
};
led-pink {
label = "pink";
- gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
};
led-red {
label = "red";
- gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
};
};
};
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2
- &pinctrl_stmpe>;
+ &pinctrl_stmpe1
+ &pinctrl_stmpe2>;
status = "okay";
pmic: pfuze100@08 {
};
};
- stmpe: stmpe1601@40 {
+ stmpe1: stmpe1601@40 {
compatible = "st,stmpe1601";
reg = <0x40>;
interrupts = <30 0>;
interrupt-parent = <&gpio3>;
- stmpe_gpio: stmpe_gpio {
+ stmpe_gpio1: stmpe_gpio {
+ #gpio-cells = <2>;
+ compatible = "st,stmpe-gpio";
+ };
+ };
+
+ stmpe2: stmpe1601@44 {
+ compatible = "st,stmpe1601";
+ reg = <0x44>;
+ interrupts = <2 0>;
+ interrupt-parent = <&gpio5>;
+
+ stmpe_gpio2: stmpe_gpio {
#gpio-cells = <2>;
compatible = "st,stmpe-gpio";
};
>;
};
- pinctrl_stmpe: stmpegrp {
+ pinctrl_stmpe1: stmpe1grp {
fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
};
+ pinctrl_stmpe2: stmpe2grp {
+ fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
pinctrl_usbotg: usbotggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
&usbh1 {
vbus-supply = <®_usb_host1>;
disable-over-current;
+ dr_mode = "host";
status = "okay";
};
&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
&ldb {
status = "okay";
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
- };
};
&pcie {
&ldb {
status = "okay";
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
};
&pcie {
/* GPIO16 -> AR8035 25MHz */
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
/* AR8035 pin strapping: IO voltage: pull up */
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
/* AR8035 pin strapping: PHYADDR#0: pull down */
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
/* AR8035 pin strapping: PHYADDR#1: pull down */
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
/* AR8035 pin strapping: MODE#1: pull up */
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
/* AR8035 pin strapping: MODE#3: pull up */
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
/* AR8035 pin strapping: MODE#0: pull down */
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
/*
* As the RMII pins are also connected to RGMII
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
#include "skeleton.dtsi"
/ {
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
status = "disabled";
MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+ MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000
>;
};
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
ckil {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
osc {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
m25p16@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p16";
+ compatible = "st,m25p16";
reg = <0>;
spi-max-frequency = <40000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l4005a";
+ compatible = "mxicy,mx25l4005a";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l1606e";
+ compatible = "mxicy,mx25l1606e";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
status = "okay";
eeprom@50 {
- compatible = "at,24c04";
+ compatible = "atmel,24c04";
pagesize = <16>;
reg = <0x50>;
};
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l12805d";
+ compatible = "mxicy,mx25l12805d";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l4005a";
+ compatible = "mxicy,mx25l4005a";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
status = "okay";
eeprom@50 {
- compatible = "at,24c04";
+ compatible = "atmel,24c04";
pagesize = <16>;
reg = <0x50>;
};
status = "okay";
adt7476: adt7476a@2e {
- compatible = "adt7476";
+ compatible = "adi,adt7476";
reg = <0x2e>;
};
};
status = "okay";
lm85: lm85@2e {
- compatible = "lm85";
+ compatible = "national,lm85";
reg = <0x2e>;
};
};
pinctrl-names = "default";
s35390a: s35390a@30 {
- compatible = "s35390a";
+ compatible = "sii,s35390a";
reg = <0x30>;
};
};
pinctrl-names = "default";
s24c02: s24c02@50 {
- compatible = "24c02";
+ compatible = "atmel,24c02";
reg = <0x50>;
};
};
--- /dev/null
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+ /* HS USB Port 2 Power enable was inverted with the xM C */
+ hsusb2_power: hsusb2_power_reg {
+ enable-active-high;
+ };
+};
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <16>;
- gpmc,device-nand;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
/* no elm on omap3 */
gpmc,mux-add-data = <0>;
- gpmc,device-nand;
gpmc,device-width = <2>;
gpmc,wait-pin = <0>;
gpmc,wait-monitoring-ns = <0>;
/*
* XXX: Use a flat representation of the OMAP3 interconnect.
* The real OMAP interconnect network is quite complex.
- * Since that will not bring real advantage to represent that in DT for
+ * Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
};
/*
- * The soc node represents the soc top level view. It is uses for IPs
+ * The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
/*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
- * Since that will not bring real advantage to represent that in DT for
+ * Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
};
/*
- * The soc node represents the soc top level view. It is uses for IPs
+ * The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
/*
* XXX: Use a flat representation of the OMAP3 interconnect.
* The real OMAP interconnect network is quite complex.
- * Since that will not bring real advantage to represent that in DT for
+ * Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy>;
+ clocks = <&usb_phy_cm_clk32k>,
+ <&sys_clkin>,
+ <&usb_otg_ss_refclk960m>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
#phy-cells = <0>;
};
};
--- /dev/null
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "LaCie d2 Network";
+ compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ front_button {
+ label = "Front Push Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_rocker_sw_on {
+ label = "Power rocker switch (on|auto)";
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_rocker_sw_off {
+ label = "Power rocker switch (auto|off)";
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
+ pinctrl-names = "default";
+
+ sata0_power: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "SATA0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ devbus,keep-config;
+
+ /*
+ * Currently the MTD code does not recognize the MX29LV400CBCT
+ * as a bottom-type device. This could cause risks of
+ * accidentally erasing critical flash sectors. We thus define
+ * a single, write-protected partition covering the whole
+ * flash. TODO: once the flash part TOP/BOTTOM detection
+ * issue is sorted out in the MTD code, break this into at
+ * least three partitions: 'u-boot code', 'u-boot environment'
+ * and 'whatever is left'.
+ */
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Full512Kb";
+ reg = <0 0x80000>;
+ read-only;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@32 {
+ compatible = "ricoh,rs5c372b";
+ reg = <0x32>;
+ };
+
+ fan@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+
+ /* Not enough HW info */
+ status = "disabled";
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
+ pinctrl-names = "default";
+
+ pmx_board_id: pmx-board-id {
+ marvell,pins = "mpp0", "mpp1", "mpp2";
+ marvell,function = "gpio";
+ };
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp8", "mpp9", "mpp18";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_fail: pmx-fan-fail {
+ marvell,pins = "mpp5";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * MPP6: Red front LED
+ * MPP16: Blue front LED blink control
+ */
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp6", "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata0_led_active: pmx-sata0-led-active {
+ marvell,pins = "mpp14";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata0_power: pmx-sata0-power {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata1_led_active: pmx-sata1-led-active {
+ marvell,pins = "mpp15";
+ marvell,function = "sata1";
+ };
+
+ pmx_sata1_power: pmx-sata1-power {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * Non MPP GPIOs:
+ * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+ * GPIO 23: Blue front LED off
+ * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+ */
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0_led_active
+ &pmx_sata1_led_active>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
* warranty of any kind, whether express or implied.
*/
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
/dts-v1/;
-/include/ "orion5x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
/ {
model = "LaCie Ethernet Disk mini V2";
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
};
- ocp@f1000000 {
- serial@12000 {
- clock-frequency = <166666667>;
- status = "okay";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_power_button>;
+ pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power-on Switch";
- linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio0 18 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
};
};
- gpio_leds {
+ gpio-leds {
compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_power_led>;
+ pinctrl-names = "default";
led@1 {
label = "power:blue";
- gpios = <&gpio0 16 1>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
};
-&mdio {
+&devbus_bootcs {
status = "okay";
- ethphy: ethernet-phy {
- reg = <8>;
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ /*
+ * Currently the MTD code does not recognize the MX29LV400CBCT
+ * as a bottom-type device. This could cause risks of
+ * accidentally erasing critical flash sectors. We thus define
+ * a single, write-protected partition covering the whole
+ * flash. TODO: once the flash part TOP/BOTTOM detection
+ * issue is sorted out in the MTD code, break this into at
+ * least three partitions: 'u-boot code', 'u-boot environment'
+ * and 'whatever is left'.
+ */
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Full512Kb";
+ reg = <0 0x80000>;
+ read-only;
+ };
};
};
+&ehci0 {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
};
};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@32 {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
+ pinctrl-names = "default";
+
+ pmx_power_button: pmx-power-button {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_led: pmx-power-led {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_led_ctrl: pmx-power-led-ctrl {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Maxtor Shared Storage II";
+ compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_buttons>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power {
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ devbus,keep-config;
+
+ /*
+ * Currently the MTD code does not recognize the MX29LV400CBCT
+ * as a bottom-type device. This could cause risks of
+ * accidentally erasing critical flash sectors. We thus define
+ * a single, write-protected partition covering the whole
+ * flash. TODO: once the flash part TOP/BOTTOM detection
+ * issue is sorted out in the MTD code, break this into at
+ * least three partitions: 'u-boot code', 'u-boot environment'
+ * and 'whatever is left'.
+ */
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x40000>;
+ bank-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@68 {
+ compatible = "st,m41t81";
+ reg = <0x68>;
+ pinctrl-0 = <&pmx_rtc>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_leds &pmx_misc>;
+ pinctrl-names = "default";
+
+ pmx_buttons: pmx-buttons {
+ marvell,pins = "mpp11", "mpp12";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * MPP0: Power LED
+ * MPP1: Error LED
+ */
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * MPP4: HDD ind. (Single/Dual)
+ * MPP5: HD0 5V control
+ * MPP6: HD0 12V control
+ * MPP7: HD1 5V control
+ * MPP8: HD1 12V control
+ */
+ pmx_misc: pmx-misc {
+ marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata0_led_active: pmx-sata0-led-active {
+ marvell,pins = "mpp14";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1_led_active: pmx-sata1-led-active {
+ marvell,pins = "mpp15";
+ marvell,function = "sata1";
+ };
+
+ /*
+ * Non MPP GPIOs:
+ * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+ * GPIO 23: Blue front LED off
+ * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+ */
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0_led_active
+ &pmx_sata1_led_active>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+ compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ soc {
+ compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+ internal-regs {
+ pinctrl: pinctrl@10000 {
+ compatible = "marvell,88f5182-pinctrl";
+ reg = <0x10000 0x8>, <0x10050 0x4>;
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp12", "mpp14";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp13", "mpp15";
+ marvell,function = "sata1";
+ };
+ };
+
+ core_clk: core-clocks@10030 {
+ compatible = "marvell,mv88f5182-core-clock";
+ reg = <0x10010 0x4>;
+ #clock-cells = <1>;
+ };
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x1500 0x20>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Marvell Reference Design 88F5182 NAS";
+ compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+ <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_debug_led>;
+ pinctrl-names = "default";
+
+ led@0 {
+ label = "rd88f5182:cpu";
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ };
+};
+
+&devbus_cs1 {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <1>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@68 {
+ pinctrl-0 = <&pmx_rtc>;
+ pinctrl-names = "default";
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+ &pmx_pci_gpios>;
+ pinctrl-names = "default";
+
+ /*
+ * MPP[20] PCI Clock to MV88F5182
+ * MPP[21] PCI Clock to mini PCI CON11
+ * MPP[22] USB 0 over current indication
+ * MPP[23] USB 1 over current indication
+ * MPP[24] USB 1 over current enable
+ * MPP[25] USB 0 over current enable
+ */
+
+ pmx_debug_led: pmx-debug_led {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ pmx_reset_switch: pmx-reset-switch {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_misc_gpios: pmx-misc-gpios {
+ marvell,pins = "mpp4", "mpp5";
+ marvell,function = "gpio";
+ };
+
+ pmx_pci_gpios: pmx-pci-gpios {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
* warranty of any kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
model = "Marvell Orion5x SoC";
gpio0 = &gpio0;
};
- intc: interrupt-controller {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xf1020200 0x08>;
- };
-
- ocp@f1000000 {
- compatible = "simple-bus";
- ranges = <0x00000000 0xf1000000 0x4000000
- 0xf2200000 0xf2200000 0x0000800>;
- #address-cells = <1>;
+ soc {
+ #address-cells = <2>;
#size-cells = <1>;
+ controller = <&mbusc>;
- gpio0: gpio@10100 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0x10100 0x40>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <6>, <7>, <8>, <9>;
- };
-
- spi@10600 {
- compatible = "marvell,orion-spi";
+ devbus_bootcs: devbus-bootcs {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- reg = <0x10600 0x28>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
+ devbus_cs0: devbus-cs0 {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
#address-cells = <1>;
- #size-cells = <0>;
- interrupts = <5>;
- clock-frequency = <100000>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- serial@12000 {
- compatible = "ns16550a";
- reg = <0x12000 0x100>;
- reg-shift = <2>;
- interrupts = <3>;
- /* set clock-frequency in board dts */
+ devbus_cs1: devbus-cs1 {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- serial@12100 {
- compatible = "ns16550a";
- reg = <0x12100 0x100>;
- reg-shift = <2>;
- interrupts = <4>;
- /* set clock-frequency in board dts */
+ devbus_cs2: devbus-cs2 {
+ compatible = "marvell,orion-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
+ ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
- wdt@20300 {
- compatible = "marvell,orion-wdt";
- reg = <0x20300 0x28>;
- status = "okay";
- };
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ gpio0: gpio@10100 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x10100 0x40>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <6>, <7>, <8>, <9>;
+ };
- ehci@50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <17>;
- status = "disabled";
- };
+ spi: spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <0x10600 0x28>;
+ status = "disabled";
+ };
- xor@60900 {
- compatible = "marvell,orion-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
- status = "okay";
+ i2c: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <5>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
+ };
- xor00 {
- interrupts = <30>;
- dmacap,memcpy;
- dmacap,xor;
+ uart0: serial@12000 {
+ compatible = "ns16550a";
+ reg = <0x12000 0x100>;
+ reg-shift = <2>;
+ interrupts = <3>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
};
- xor01 {
- interrupts = <31>;
- dmacap,memcpy;
- dmacap,xor;
- dmacap,memset;
+
+ uart1: serial@12100 {
+ compatible = "ns16550a";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <4>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
};
- };
- eth: ethernet-controller@72000 {
- compatible = "marvell,orion-eth";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72000 0x4000>;
- marvell,tx-checksum-limit = <1600>;
- status = "disabled";
+ bridge_intc: bridge-interrupt-ctrl@20110 {
+ compatible = "marvell,orion-bridge-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <0>;
+ marvell,#interrupts = <4>;
+ };
- ethernet-port@0 {
- compatible = "marvell,orion-eth-port";
- reg = <0>;
- /* overwrite MAC address in bootloader */
- local-mac-address = [00 00 00 00 00 00];
- /* set phy-handle property in board file */
+ intc: interrupt-controller@20200 {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x08>;
};
- };
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <22>;
- status = "disabled";
+ timer: timer@20300 {
+ compatible = "marvell,orion-timer";
+ reg = <0x20300 0x20>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <1>, <2>;
+ clocks = <&core_clk 0>;
+ };
- /* add phy nodes in board file */
- };
+ wdt: wdt@20300 {
+ compatible = "marvell,orion-wdt";
+ reg = <0x20300 0x28>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <3>;
+ status = "okay";
+ };
- sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <29>;
- status = "disabled";
+ ehci0: ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
+ xor: dma-controller@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <30>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <31>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ eth: ethernet-controller@72000 {
+ compatible = "marvell,orion-eth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72000 0x4000>;
+ marvell,tx-checksum-limit = <1600>;
+ status = "disabled";
+
+ ethport: ethernet-port@0 {
+ compatible = "marvell,orion-eth-port";
+ reg = <0>;
+ interrupts = <21>;
+ /* overwrite MAC address in bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ /* set phy-handle property in board file */
+ };
+ };
+
+ mdio: mdio-bus@72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <22>;
+ status = "disabled";
+
+ /* add phy nodes in board file */
+ };
+
+ sata: sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ ehci1: ehci@a0000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0xa0000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
};
- crypto@90000 {
+ cesa: crypto@90000 {
compatible = "marvell,orion-crypto";
- reg = <0x90000 0x10000>,
- <0xf2200000 0x800>;
+ reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
+ <MBUS_ID(0x09, 0x00) 0x0 0x800>;
reg-names = "regs", "sram";
interrupts = <28>;
status = "okay";
};
-
- ehci@a0000 {
- compatible = "marvell,orion-ehci";
- reg = <0xa0000 0x1000>;
- interrupts = <12>;
- status = "disabled";
- };
};
};
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0x0>;
+ clock-frequency = <800000000>;
};
};
gic: interrupt-controller@c2800000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
interrupt-controller;
reg = <0xc2800000 0x1000>,
<0xc2000000 0x1000>;
};
sdhi0_pins: sd0 {
- renesas,gpios = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
renesas,function = "sdhi0";
};
sdhi2_pins: sd2 {
- renesas,gpios = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
renesas,function = "sdhi2";
};
renesas,clock-indices = <
R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
- R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY
+ R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
>;
clock-output-names =
"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
};
sdhi0_pins: sd0 {
- renesas,gpios = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
renesas,function = "sdhi0";
};
sdhi1_pins: sd1 {
- renesas,gpios = "sdhi1_data4", "sdhi1_ctrl";
+ renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
renesas,function = "sdhi1";
};
sdhi2_pins: sd2 {
- renesas,gpios = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
renesas,function = "sdhi2";
};
renesas,clock-indices = <
R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
- R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY
+ R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
>;
clock-output-names =
"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
uart3 {
uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
};
reg = <0x20000000 0x8000000>;
};
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
clocks {
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#size-cells = <0>;
#interrupt-cells = <1>;
- clk32k: slck {
- compatible = "fixed-clock";
+ main_rc_osc: main_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-main-rc-osc";
#clock-cells = <0>;
- clock-frequency = <32768>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCRCS>;
+ clock-frequency = <12000000>;
+ clock-accuracy = <50000000>;
};
- main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCS>;
- clocks = <&clk32k>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91sam9x5-clk-main";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCSELS>;
+ clocks = <&main_rc_osc &main_osc>;
};
plla: pllack {
status = "disabled";
};
+ sckc@fffffe50 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfffffe50 0x4>;
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ atmel,startup-time-usec = <75>;
+ };
+
+ slow_osc: slow_osc {
+ compatible = "atmel,at91sam9x5-clk-slow-osc";
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
+ atmel,startup-time-usec = <1200000>;
+ };
+
+ clk32k: slowck {
+ compatible = "atmel,at91sam9x5-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc &slow_osc>;
+ };
+ };
+
rtc@fffffeb0 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
reg = <0x20000000 0x20000000>;
};
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+
ahb {
apb {
spi0: spi@f0004000 {
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
interrupt-controller;
reg = <0xf0001000 0x1000>,
<0xf0000100 0x100>;
reg = <0xfe61f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x5000>;
PIO0: gpio@fe610000 {
reg = <0xfee0f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x8000>;
PIO5: gpio@fee00000 {
reg = <0xfe82f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x8000>;
PIO13: gpio@fe820000 {
reg = <0xfd6bf080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
PIO100: gpio@fd6b0000 {
reg = <0xfd33f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
PIO103: gpio@fd330000 {
reg = <0xfe61f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x6000>;
PIO0: gpio@fe610000 {
reg = <0xfee0f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x10000>;
PIO5: gpio@fee00000 {
reg = <0xfe82f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x6000>;
PIO13: gpio@fe820000 {
reg = <0xfd6bf080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
PIO100: gpio@fd6b0000 {
reg = <0xfd33f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
PIO103: gpio@fd330000 {
status = "disabled";
};
- serial@0,70006400 {
- compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
- reg = <0x0 0x70006400 0x0 0x40>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA124_CLK_UARTE>;
- resets = <&tegra_car 66>;
- reset-names = "serial";
- dmas = <&apbdma 20>, <&apbdma 20>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
-
pwm@0,7000a000 {
compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
reg = <0x0 0x7000a000 0x0 0x100>;
clocks {
audio_ext {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24576000>;
};
enet_ext {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <50000000>;
};
};
sxosc {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
fxosc {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
interrupt-controller;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
device_type = "cpu";
reg = <0>;
clocks = <&clkc 3>;
+ clock-latency = <1000>;
operating-points = <
/* kHz uV */
666667 1000000
interrupt-parent = <&intc>;
ranges;
+ i2c0: zynq-i2c@e0004000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ clocks = <&clkc 38>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 25 4>;
+ reg = <0xe0004000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: zynq-i2c@e0005000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ clocks = <&clkc 39>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 48 4>;
+ reg = <0xe0005000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
intc: interrupt-controller@f8f01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
phy-mode = "rgmii";
};
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ i2cswitch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ hwmon@52 {
+ compatible = "ti,ucd9248";
+ reg = <52>;
+ };
+ hwmon@53 {
+ compatible = "ti,ucd9248";
+ reg = <53>;
+ };
+ hwmon@54 {
+ compatible = "ti,ucd9248";
+ reg = <54>;
+ };
+ };
+ };
+};
+
&sdhci0 {
status = "okay";
};
phy-mode = "rgmii";
};
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ i2cswitch@74 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ si570: clock-generator@5d {
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ temperature-stability = <50>;
+ reg = <0x5d>;
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@54 {
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ ucd90120@65 {
+ compatible = "ti,ucd90120";
+ reg = <0x65>;
+ };
+ };
+ };
+};
+
&sdhci0 {
status = "okay";
};
{
int ret;
- if (MAX_NR_CLUSTERS != 2) {
- pr_err("%s: only dual cluster systems are supported\n", __func__);
- return -EINVAL;
- }
+ if (!mcpm_is_available())
+ return -ENODEV;
cpu_notifier(bL_switcher_hotplug_callback, 0);
return 0;
}
+bool mcpm_is_available(void)
+{
+ return (platform_ops) ? true : false;
+}
+
int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
{
if (!platform_ops)
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_AT_HDMAC=y
CONFIG_DMATEST=m
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_MMC_ATMELMCI=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
CONFIG_CS89x0=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_DMA=y
-CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
+CONFIG_CMA=y
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
+CONFIG_DMA_CMA=y
CONFIG_IMX_WEIM=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_VIDEO_CODA=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_DRM=y
+CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_IPUV3_CORE=y
CONFIG_DRM_IMX_IPUV3=y
-CONFIG_COMMON_CLK_DEBUG=y
+CONFIG_DRM_IMX_HDMI=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_PWM=y
CONFIG_PWM_IMX=y
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
-CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MTD_SST25L=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
CONFIG_EEPROM_AT24=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_MXS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_MXS_DMA=y
CONFIG_STAGING=y
CONFIG_MXS_LRADC=y
-CONFIG_COMMON_CLK_DEBUG=y
CONFIG_IIO=y
CONFIG_IIO_SYSFS_TRIGGER=y
CONFIG_PWM=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_USER=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_DEV_MXS_DCP=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC7=m
CONFIG_FONTS=y
CONFIG_USB_TEST=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_USB2=y
-CONFIG_OMAP_USB3=y
+CONFIG_TI_PIPE3=y
CONFIG_AM335X_PHY_USB=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_U300=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
-CONFIG_MACH_UX500_DT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NETFILTER=y
CONFIG_PHONET=y
-# CONFIG_WIRELESS is not set
+CONFIG_CFG80211=y
+CONFIG_CFG80211_DEBUGFS=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
+CONFIG_CW1200=y
+CONFIG_CW1200_WLAN_SDIO=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP5521=y
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y
CONFIG_STAGING=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_HSEM_U8500=y
+CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=y
+CONFIG_IIO_ST_GYRO_3AXIS=y
+CONFIG_IIO_ST_MAGN_3AXIS=y
+CONFIG_IIO_ST_PRESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
#endif
/*
- * Marvell's PJ4 core is based on V7 version. It has some modification
- * for coprocessor setting. For this reason, we need a way to distinguish
- * it.
+ * Marvell's PJ4 and PJ4B cores are based on V7 version,
+ * but require a specical sequence for enabling coprocessors.
+ * For this reason, we need a way to distinguish them.
*/
-#ifndef CONFIG_CPU_PJ4
-#define cpu_is_pj4() 0
-#else
+#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
static inline int cpu_is_pj4(void)
{
unsigned int id;
id = read_cpuid_id();
- if ((id & 0xfffffff0) == 0x562f5840)
+ if ((id & 0xff0fff00) == 0x560f5800)
return 1;
return 0;
}
+#else
+#define cpu_is_pj4() 0
#endif
#endif
/* Select the best insn combination to perform the */ \
/* actual __m * __n / (__p << 64) operation. */ \
if (!__c) { \
- asm ( "umull %Q0, %R0, %1, %Q2\n\t" \
+ asm ( "umull %Q0, %R0, %Q1, %Q2\n\t" \
"mov %Q0, #0" \
: "=&r" (__res) \
: "r" (__m), "r" (__n) \
* CPU/cluster power operations API for higher subsystems to use.
*/
+/**
+ * mcpm_is_available - returns whether MCPM is initialized and available
+ *
+ * This returns true or false accordingly.
+ */
+bool mcpm_is_available(void);
+
/**
* mcpm_cpu_power_up - make given CPU in given cluster runable
*
}
}
-static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
tlb_flush(tlb);
+}
+
+static inline void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
free_pages_and_swap_cache(tlb->pages, tlb->nr);
tlb->nr = 0;
if (tlb->pages == tlb->local)
__tlb_alloc_page(tlb);
}
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+ tlb_flush_mmu_tlbonly(tlb);
+ tlb_flush_mmu_free(tlb);
+}
+
static inline void
tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
{
#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
#define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n)
+#define IMX6SX_UART1_BASE_ADDR 0x02020000
+#define IMX6SX_UART2_BASE_ADDR 0x021e8000
+#define IMX6SX_UART3_BASE_ADDR 0x021ec000
+#define IMX6SX_UART4_BASE_ADDR 0x021f0000
+#define IMX6SX_UART5_BASE_ADDR 0x021f4000
+#define IMX6SX_UART6_BASE_ADDR 0x022a0000
+#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
+#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n)
+
#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q)
#elif defined(CONFIG_DEBUG_IMX6SL_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL)
+#elif defined(CONFIG_DEBUG_IMX6SX_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX)
#endif
#endif /* __DEBUG_IMX_UART_H */
*
*/
+#define VF_UART0_BASE_ADDR 0x40027000
+#define VF_UART1_BASE_ADDR 0x40028000
+#define VF_UART2_BASE_ADDR 0x40029000
+#define VF_UART3_BASE_ADDR 0x4002a000
+#define VF_UART_BASE_ADDR(n) VF_UART##n##_BASE_ADDR
+#define VF_UART_BASE(n) VF_UART_BASE_ADDR(n)
+#define VF_UART_PHYSICAL_BASE VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT)
+
+#define VF_UART_VIRTUAL_BASE 0xfe000000
+
.macro addruart, rp, rv, tmp
- ldr \rp, =0x40028000 @ physical
- ldr \rv, =0xfe028000 @ virtual
+ ldr \rp, =VF_UART_PHYSICAL_BASE @ physical
+ and \rv, \rp, #0xffffff @ offset within 16MB section
+ add \rv, \rv, #VF_UART_VIRTUAL_BASE
.endm
.macro senduart, rd, rx
#define __NR_finit_module (__NR_SYSCALL_BASE+379)
#define __NR_sched_setattr (__NR_SYSCALL_BASE+380)
#define __NR_sched_getattr (__NR_SYSCALL_BASE+381)
+#define __NR_renameat2 (__NR_SYSCALL_BASE+382)
/*
* This may need to be greater than __NR_last_syscall+1 in order to
obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o
obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o
obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o
+obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o
CALL(sys_finit_module)
/* 380 */ CALL(sys_sched_setattr)
CALL(sys_sched_getattr)
+ CALL(sys_renameat2)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
add r6, r6, r3 @ adjust __pv_phys_pfn_offset address
add r7, r7, r3 @ adjust __pv_offset address
mov r0, r8, lsr #12 @ convert to PFN
- str r0, [r6, #LOW_OFFSET] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset
+ str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset
strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits
mov r6, r3, lsr #24 @ constant for add/sub instructions
teq r3, r6, lsl #24 @ must be 16MiB aligned
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
-#if defined(CONFIG_CPU_PJ4)
+#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
#define PJ4(code...) code
#define XSC(code...)
-#else
+#elif defined(CONFIG_CPU_MOHAWK) || \
+ defined(CONFIG_CPU_XSC3) || \
+ defined(CONFIG_CPU_XSCALE)
#define PJ4(code...)
#define XSC(code...) code
+#else
+#error "Unsupported iWMMXt architecture"
#endif
#define MMX_WR0 (0x00)
soft_restart(reboot_entry_phys);
}
+
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_ARM_LPAE
+ VMCOREINFO_CONFIG(ARM_LPAE);
+#endif
+}
return NOTIFY_DONE;
}
-static struct notifier_block iwmmxt_notifier_block = {
+static struct notifier_block __maybe_unused iwmmxt_notifier_block = {
.notifier_call = iwmmxt_do,
};
: "=r" (temp) : "r" (value));
}
+static int __init pj4_get_iwmmxt_version(void)
+{
+ u32 cp_access, wcid;
+
+ cp_access = pj4_cp_access_read();
+ pj4_cp_access_write(cp_access | 0xf);
+
+ /* check if coprocessor 0 and 1 are available */
+ if ((pj4_cp_access_read() & 0xf) != 0xf) {
+ pj4_cp_access_write(cp_access);
+ return -ENODEV;
+ }
+
+ /* read iWMMXt coprocessor id register p1, c0 */
+ __asm__ __volatile__ ("mrc p1, 0, %0, c0, c0, 0\n" : "=r" (wcid));
+
+ pj4_cp_access_write(cp_access);
+
+ /* iWMMXt v1 */
+ if ((wcid & 0xffffff00) == 0x56051000)
+ return 1;
+ /* iWMMXt v2 */
+ if ((wcid & 0xffffff00) == 0x56052000)
+ return 2;
+
+ return -EINVAL;
+}
/*
* Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
*/
static int __init pj4_cp0_init(void)
{
- u32 cp_access;
+ u32 __maybe_unused cp_access;
+ int vers;
if (!cpu_is_pj4())
return 0;
+ vers = pj4_get_iwmmxt_version();
+ if (vers < 0)
+ return 0;
+
+#ifndef CONFIG_IWMMXT
+ pr_info("PJ4 iWMMXt coprocessor detected, but kernel support is missing.\n");
+#else
cp_access = pj4_cp_access_read() & ~0xf;
pj4_cp_access_write(cp_access);
- printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n");
+ pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers);
elf_hwcap |= HWCAP_IWMMXT;
thread_register_notifier(&iwmmxt_notifier_block);
+#endif
return 0;
}
int ret;
switch (cmd) {
- case F_GETLKP:
- case F_SETLKP:
- case F_SETLKPW:
+ case F_OFD_GETLK:
+ case F_OFD_SETLK:
+ case F_OFD_SETLKW:
case F_GETLK64:
case F_SETLK64:
case F_SETLKW64:
select HAVE_KVM_CPU_RELAX_INTERCEPT
select KVM_MMIO
select KVM_ARM_HOST
- depends on ARM_VIRT_EXT && ARM_LPAE
+ depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN
---help---
Support hosting virtualized guest machines. You will also
need to select one or more of the processor modules below.
static unsigned long hyp_idmap_end;
static phys_addr_t hyp_idmap_vector;
+#define pgd_order get_order(PTRS_PER_PGD * sizeof(pgd_t))
+
#define kvm_pmd_huge(_x) (pmd_huge(_x) || pmd_trans_huge(_x))
static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
if (boot_hyp_pgd) {
unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
- kfree(boot_hyp_pgd);
+ free_pages((unsigned long)boot_hyp_pgd, pgd_order);
boot_hyp_pgd = NULL;
}
if (hyp_pgd)
unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
- kfree(init_bounce_page);
+ free_page((unsigned long)init_bounce_page);
init_bounce_page = NULL;
mutex_unlock(&kvm_hyp_pgd_mutex);
for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
- kfree(hyp_pgd);
+ free_pages((unsigned long)hyp_pgd, pgd_order);
hyp_pgd = NULL;
}
size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start;
phys_addr_t phys_base;
- init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ init_bounce_page = (void *)__get_free_page(GFP_KERNEL);
if (!init_bounce_page) {
kvm_err("Couldn't allocate HYP init bounce page\n");
err = -ENOMEM;
(unsigned long)phys_base);
}
- hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
- boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL);
+ hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+ boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, pgd_order);
+
if (!hyp_pgd || !boot_hyp_pgd) {
kvm_err("Hyp mode PGD not allocated\n");
err = -ENOMEM;
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_adc.h>
#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
/* --------------------------------------------------------------------
* USB Host
};
static struct platform_device at91_adc_device = {
- .name = "at91_adc",
+ .name = "at91sam9260-adc",
.id = -1,
.dev = {
.platform_data = &adc_data,
},
};
-static struct at91_adc_reg_desc at91_adc_register_g20 = {
- .channel_base = AT91_ADC_CHR(0),
- .drdy_mask = AT91_ADC_DRDY,
- .status_register = AT91_ADC_SR,
- .trigger_register = AT91_ADC_MR,
-};
-
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PA22, 0);
- data->num_channels = 4;
data->startup_time = 10;
- data->registers = &at91_adc_register_g20;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
/* --------------------------------------------------------------------
* USB Host
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 13200000,
+ .rate_hz = 300000,
};
/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
-#include <mach/at91_adc.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
#include "board.h"
#include "generic.h"
#include "clock.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
/* --------------------------------------------------------------------
- * Touchscreen
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
-
-static struct resource tsadcc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TSC,
- .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9g45_tsadcc_device = {
- .name = "atmel_tsadcc",
- .id = -1,
- .dev = {
- .dma_mask = &tsadcc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tsadcc_data,
- },
- .resource = tsadcc_resources,
- .num_resources = ARRAY_SIZE(tsadcc_resources),
-};
-
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
-{
- if (!data)
- return;
-
- at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
- at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
- at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
- at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
-
- tsadcc_data = *data;
- platform_device_register(&at91sam9g45_tsadcc_device);
-}
-#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * ADC
+ * ADC and touchscreen
* -------------------------------------------------------------------- */
#if IS_ENABLED(CONFIG_AT91_ADC)
};
static struct platform_device at91_adc_device = {
- .name = "at91_adc",
+ .name = "at91sam9g45-adc",
.id = -1,
.dev = {
.platform_data = &adc_data,
},
};
-static struct at91_adc_reg_desc at91_adc_register_g45 = {
- .channel_base = AT91_ADC_CHR(0),
- .drdy_mask = AT91_ADC_DRDY,
- .status_register = AT91_ADC_SR,
- .trigger_register = 0x08,
-};
-
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PD28, 0);
- data->num_channels = 8;
data->startup_time = 40;
- data->registers = &at91_adc_register_g45;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk adc_op_clk = {
+ .name = "adc_op_clk",
+ .type = CLK_TYPE_PERIPHERAL,
+ .rate_hz = 1000000,
+};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&udphs_clk,
&lcdc_clk,
&ac97_clk,
+ &adc_op_clk,
// irq0
};
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
+ CLKDEV_CON_ID("adc_clk", &tsc_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
#include <mach/at91sam9_smc.h>
#include <mach/hardware.h>
#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_data/at91_adc.h>
#include "board.h"
#include "generic.h"
+#include "gpio.h"
/* --------------------------------------------------------------------
/* --------------------------------------------------------------------
- * Touchscreen
+ * ADC and Touchscreen
* -------------------------------------------------------------------- */
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
+#if IS_ENABLED(CONFIG_AT91_ADC)
+static struct at91_adc_data adc_data;
-static struct resource tsadcc_resources[] = {
+static struct resource adc_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_TSC,
.end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
}
};
-static struct platform_device at91sam9rl_tsadcc_device = {
- .name = "atmel_tsadcc",
- .id = -1,
- .dev = {
- .dma_mask = &tsadcc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tsadcc_data,
+static struct platform_device at91_adc_device = {
+ .name = "at91sam9rl-adc",
+ .id = -1,
+ .dev = {
+ .platform_data = &adc_data,
},
- .resource = tsadcc_resources,
- .num_resources = ARRAY_SIZE(tsadcc_resources),
+ .resource = adc_resources,
+ .num_resources = ARRAY_SIZE(adc_resources),
};
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+static struct at91_adc_trigger at91_adc_triggers[] = {
+ [0] = {
+ .name = "external-rising",
+ .value = 1,
+ .is_external = true,
+ },
+ [1] = {
+ .name = "external-falling",
+ .value = 2,
+ .is_external = true,
+ },
+ [2] = {
+ .name = "external-any",
+ .value = 3,
+ .is_external = true,
+ },
+ [3] = {
+ .name = "continuous",
+ .value = 6,
+ .is_external = false,
+ },
+};
+
+void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
return;
- at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */
-
- tsadcc_data = *data;
- platform_device_register(&at91sam9rl_tsadcc_device);
+ if (test_bit(0, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA17, 0);
+ if (test_bit(1, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA18, 0);
+ if (test_bit(2, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA19, 0);
+ if (test_bit(3, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PA20, 0);
+ if (test_bit(4, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PD6, 0);
+ if (test_bit(5, &data->channels_used))
+ at91_set_A_periph(AT91_PIN_PD7, 0);
+
+ if (data->use_external_triggers)
+ at91_set_A_periph(AT91_PIN_PB15, 0);
+
+ data->startup_time = 40;
+ data->trigger_number = 4;
+ data->trigger_list = at91_adc_triggers;
+
+ adc_data = *data;
+ platform_device_register(&at91_adc_device);
}
#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+void __init at91_add_device_adc(struct at91_adc_data *data) {}
#endif
-
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
static void __init onearm_init_early(void)
{
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init afeb9260_init_early(void)
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init cam60_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init carmeva_init_early(void)
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init cpu9krea_init_early(void)
{
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
+
static struct gpio_led cpuat91_leds[] = {
{
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
-
+#include "gpio.h"
static void __init csb337_init_early(void)
{
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init csb637_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init eb9200_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init ecb_at91init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
+
static void __init eco920_init_early(void)
{
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init flexibity_init_early(void)
{
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
/*
* The FOX Board G20 hardware comes as the "Netus G20" board with
#include "generic.h"
#include "gsia18s.h"
#include "stamp9g20.h"
+#include "gpio.h"
static void __init gsia18s_init_early(void)
{
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init kafa_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init kb9202_init_early(void)
#include "sam9_smc.h"
#include "generic.h"
#include "stamp9g20.h"
+#include "gpio.h"
static void __init pcontrol_g20_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init picotux200_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init rsi_ews_init_early(void)
{
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
/*
* board revision encoding
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
/*
- * Touchscreen
- */
-static struct at91_tsadcc_data ek_tsadcc_data = {
- .adc_clock = 300000,
- .pendet_debounce = 0x0d,
- .ts_sample_hold_time = 0x0a,
-};
-
-/*
- * ADCs
+ * ADCs and touchscreen
*/
static struct at91_adc_data ek_adc_data = {
.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
.use_external_triggers = true,
.vref = 3300,
+ .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
/*
at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
- /* Touch Screen */
- at91_add_device_tsadcc(&ek_tsadcc_data);
- /* ADC */
+ /* ADC and touchscreen */
at91_add_device_adc(&ek_adc_data);
/* Push Buttons */
ek_add_device_buttons();
#include <linux/clk.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/platform_data/at91_adc.h>
#include <video/atmel_lcdc.h>
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
static void __init ek_init_early(void)
/*
- * Touchscreen
+ * ADC + Touchscreen
*/
-static struct at91_tsadcc_data ek_tsadcc_data = {
- .adc_clock = 1000000,
- .pendet_debounce = 0x0f,
- .ts_sample_hold_time = 0x03,
+static struct at91_adc_data ek_adc_data = {
+ .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
+ .use_external_triggers = true,
+ .vref = 3300,
+ .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
};
at91_add_device_lcdc(&ek_lcdc_data);
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
- /* Touch Screen Controller */
- at91_add_device_tsadcc(&ek_tsadcc_data);
+ /* Touch Screen Controller + ADC */
+ at91_add_device_adc(&ek_adc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
+#include "gpio.h"
void __init stamp9g20_init_early(void)
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
+#include "gpio.h"
static void __init yl9200_init_early(void)
extern void __init at91_add_device_isi(struct isi_platform_data *data,
bool use_pck_as_mck);
- /* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
-
/* CAN */
extern void __init at91_add_device_can(struct at91_can_data *data);
#include <mach/at91_pio.h>
#include "generic.h"
+#include "gpio.h"
#define MAX_NB_GPIO_PER_BANK 32
--- /dev/null
+/*
+ * arch/arm/mach-at91/include/mach/gpio.h
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <linux/kernel.h>
+#include <asm/irq.h>
+
+#define MAX_GPIO_BANKS 5
+#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32)
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define AT91_PIN_PA0 (0x00 + 0)
+#define AT91_PIN_PA1 (0x00 + 1)
+#define AT91_PIN_PA2 (0x00 + 2)
+#define AT91_PIN_PA3 (0x00 + 3)
+#define AT91_PIN_PA4 (0x00 + 4)
+#define AT91_PIN_PA5 (0x00 + 5)
+#define AT91_PIN_PA6 (0x00 + 6)
+#define AT91_PIN_PA7 (0x00 + 7)
+#define AT91_PIN_PA8 (0x00 + 8)
+#define AT91_PIN_PA9 (0x00 + 9)
+#define AT91_PIN_PA10 (0x00 + 10)
+#define AT91_PIN_PA11 (0x00 + 11)
+#define AT91_PIN_PA12 (0x00 + 12)
+#define AT91_PIN_PA13 (0x00 + 13)
+#define AT91_PIN_PA14 (0x00 + 14)
+#define AT91_PIN_PA15 (0x00 + 15)
+#define AT91_PIN_PA16 (0x00 + 16)
+#define AT91_PIN_PA17 (0x00 + 17)
+#define AT91_PIN_PA18 (0x00 + 18)
+#define AT91_PIN_PA19 (0x00 + 19)
+#define AT91_PIN_PA20 (0x00 + 20)
+#define AT91_PIN_PA21 (0x00 + 21)
+#define AT91_PIN_PA22 (0x00 + 22)
+#define AT91_PIN_PA23 (0x00 + 23)
+#define AT91_PIN_PA24 (0x00 + 24)
+#define AT91_PIN_PA25 (0x00 + 25)
+#define AT91_PIN_PA26 (0x00 + 26)
+#define AT91_PIN_PA27 (0x00 + 27)
+#define AT91_PIN_PA28 (0x00 + 28)
+#define AT91_PIN_PA29 (0x00 + 29)
+#define AT91_PIN_PA30 (0x00 + 30)
+#define AT91_PIN_PA31 (0x00 + 31)
+
+#define AT91_PIN_PB0 (0x20 + 0)
+#define AT91_PIN_PB1 (0x20 + 1)
+#define AT91_PIN_PB2 (0x20 + 2)
+#define AT91_PIN_PB3 (0x20 + 3)
+#define AT91_PIN_PB4 (0x20 + 4)
+#define AT91_PIN_PB5 (0x20 + 5)
+#define AT91_PIN_PB6 (0x20 + 6)
+#define AT91_PIN_PB7 (0x20 + 7)
+#define AT91_PIN_PB8 (0x20 + 8)
+#define AT91_PIN_PB9 (0x20 + 9)
+#define AT91_PIN_PB10 (0x20 + 10)
+#define AT91_PIN_PB11 (0x20 + 11)
+#define AT91_PIN_PB12 (0x20 + 12)
+#define AT91_PIN_PB13 (0x20 + 13)
+#define AT91_PIN_PB14 (0x20 + 14)
+#define AT91_PIN_PB15 (0x20 + 15)
+#define AT91_PIN_PB16 (0x20 + 16)
+#define AT91_PIN_PB17 (0x20 + 17)
+#define AT91_PIN_PB18 (0x20 + 18)
+#define AT91_PIN_PB19 (0x20 + 19)
+#define AT91_PIN_PB20 (0x20 + 20)
+#define AT91_PIN_PB21 (0x20 + 21)
+#define AT91_PIN_PB22 (0x20 + 22)
+#define AT91_PIN_PB23 (0x20 + 23)
+#define AT91_PIN_PB24 (0x20 + 24)
+#define AT91_PIN_PB25 (0x20 + 25)
+#define AT91_PIN_PB26 (0x20 + 26)
+#define AT91_PIN_PB27 (0x20 + 27)
+#define AT91_PIN_PB28 (0x20 + 28)
+#define AT91_PIN_PB29 (0x20 + 29)
+#define AT91_PIN_PB30 (0x20 + 30)
+#define AT91_PIN_PB31 (0x20 + 31)
+
+#define AT91_PIN_PC0 (0x40 + 0)
+#define AT91_PIN_PC1 (0x40 + 1)
+#define AT91_PIN_PC2 (0x40 + 2)
+#define AT91_PIN_PC3 (0x40 + 3)
+#define AT91_PIN_PC4 (0x40 + 4)
+#define AT91_PIN_PC5 (0x40 + 5)
+#define AT91_PIN_PC6 (0x40 + 6)
+#define AT91_PIN_PC7 (0x40 + 7)
+#define AT91_PIN_PC8 (0x40 + 8)
+#define AT91_PIN_PC9 (0x40 + 9)
+#define AT91_PIN_PC10 (0x40 + 10)
+#define AT91_PIN_PC11 (0x40 + 11)
+#define AT91_PIN_PC12 (0x40 + 12)
+#define AT91_PIN_PC13 (0x40 + 13)
+#define AT91_PIN_PC14 (0x40 + 14)
+#define AT91_PIN_PC15 (0x40 + 15)
+#define AT91_PIN_PC16 (0x40 + 16)
+#define AT91_PIN_PC17 (0x40 + 17)
+#define AT91_PIN_PC18 (0x40 + 18)
+#define AT91_PIN_PC19 (0x40 + 19)
+#define AT91_PIN_PC20 (0x40 + 20)
+#define AT91_PIN_PC21 (0x40 + 21)
+#define AT91_PIN_PC22 (0x40 + 22)
+#define AT91_PIN_PC23 (0x40 + 23)
+#define AT91_PIN_PC24 (0x40 + 24)
+#define AT91_PIN_PC25 (0x40 + 25)
+#define AT91_PIN_PC26 (0x40 + 26)
+#define AT91_PIN_PC27 (0x40 + 27)
+#define AT91_PIN_PC28 (0x40 + 28)
+#define AT91_PIN_PC29 (0x40 + 29)
+#define AT91_PIN_PC30 (0x40 + 30)
+#define AT91_PIN_PC31 (0x40 + 31)
+
+#define AT91_PIN_PD0 (0x60 + 0)
+#define AT91_PIN_PD1 (0x60 + 1)
+#define AT91_PIN_PD2 (0x60 + 2)
+#define AT91_PIN_PD3 (0x60 + 3)
+#define AT91_PIN_PD4 (0x60 + 4)
+#define AT91_PIN_PD5 (0x60 + 5)
+#define AT91_PIN_PD6 (0x60 + 6)
+#define AT91_PIN_PD7 (0x60 + 7)
+#define AT91_PIN_PD8 (0x60 + 8)
+#define AT91_PIN_PD9 (0x60 + 9)
+#define AT91_PIN_PD10 (0x60 + 10)
+#define AT91_PIN_PD11 (0x60 + 11)
+#define AT91_PIN_PD12 (0x60 + 12)
+#define AT91_PIN_PD13 (0x60 + 13)
+#define AT91_PIN_PD14 (0x60 + 14)
+#define AT91_PIN_PD15 (0x60 + 15)
+#define AT91_PIN_PD16 (0x60 + 16)
+#define AT91_PIN_PD17 (0x60 + 17)
+#define AT91_PIN_PD18 (0x60 + 18)
+#define AT91_PIN_PD19 (0x60 + 19)
+#define AT91_PIN_PD20 (0x60 + 20)
+#define AT91_PIN_PD21 (0x60 + 21)
+#define AT91_PIN_PD22 (0x60 + 22)
+#define AT91_PIN_PD23 (0x60 + 23)
+#define AT91_PIN_PD24 (0x60 + 24)
+#define AT91_PIN_PD25 (0x60 + 25)
+#define AT91_PIN_PD26 (0x60 + 26)
+#define AT91_PIN_PD27 (0x60 + 27)
+#define AT91_PIN_PD28 (0x60 + 28)
+#define AT91_PIN_PD29 (0x60 + 29)
+#define AT91_PIN_PD30 (0x60 + 30)
+#define AT91_PIN_PD31 (0x60 + 31)
+
+#define AT91_PIN_PE0 (0x80 + 0)
+#define AT91_PIN_PE1 (0x80 + 1)
+#define AT91_PIN_PE2 (0x80 + 2)
+#define AT91_PIN_PE3 (0x80 + 3)
+#define AT91_PIN_PE4 (0x80 + 4)
+#define AT91_PIN_PE5 (0x80 + 5)
+#define AT91_PIN_PE6 (0x80 + 6)
+#define AT91_PIN_PE7 (0x80 + 7)
+#define AT91_PIN_PE8 (0x80 + 8)
+#define AT91_PIN_PE9 (0x80 + 9)
+#define AT91_PIN_PE10 (0x80 + 10)
+#define AT91_PIN_PE11 (0x80 + 11)
+#define AT91_PIN_PE12 (0x80 + 12)
+#define AT91_PIN_PE13 (0x80 + 13)
+#define AT91_PIN_PE14 (0x80 + 14)
+#define AT91_PIN_PE15 (0x80 + 15)
+#define AT91_PIN_PE16 (0x80 + 16)
+#define AT91_PIN_PE17 (0x80 + 17)
+#define AT91_PIN_PE18 (0x80 + 18)
+#define AT91_PIN_PE19 (0x80 + 19)
+#define AT91_PIN_PE20 (0x80 + 20)
+#define AT91_PIN_PE21 (0x80 + 21)
+#define AT91_PIN_PE22 (0x80 + 22)
+#define AT91_PIN_PE23 (0x80 + 23)
+#define AT91_PIN_PE24 (0x80 + 24)
+#define AT91_PIN_PE25 (0x80 + 25)
+#define AT91_PIN_PE26 (0x80 + 26)
+#define AT91_PIN_PE27 (0x80 + 27)
+#define AT91_PIN_PE28 (0x80 + 28)
+#define AT91_PIN_PE29 (0x80 + 29)
+#define AT91_PIN_PE30 (0x80 + 30)
+#define AT91_PIN_PE31 (0x80 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on);
+extern int __init_or_module at91_disable_schmitt_trig(unsigned pin);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR 0x00 /* Control Register */
-#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
-#define AT91_ADC_START (1 << 1) /* Start Conversion */
-
-#define AT91_ADC_MR 0x04 /* Mode Register */
-#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
-#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
-#define AT91_ADC_TRGSEL_TC0 (0 << 1)
-#define AT91_ADC_TRGSEL_TC1 (1 << 1)
-#define AT91_ADC_TRGSEL_TC2 (2 << 1)
-#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
-#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
-#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
-#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */
-#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
-#define AT91_ADC_PRESCAL_(x) ((x) << 8)
-#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */
-#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
-#define AT91_ADC_STARTUP_9X5 (0xf << 16)
-#define AT91_ADC_STARTUP_(x) ((x) << 16)
-#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
-#define AT91_ADC_SHTIM_(x) ((x) << 24)
-
-#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
-#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
-#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
-#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
-
-#define AT91_ADC_SR 0x1C /* Status Register */
-#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
-#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
-#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
-#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
-#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
-#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
-
-#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
-#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
-
-#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
-#define AT91_ADC_LDATA (0x3ff)
-
-#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
-#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
-#define AT91_ADC_IER_PEN (1 << 29)
-#define AT91_ADC_IER_NOPEN (1 << 30)
-#define AT91_ADC_IER_XRDY (1 << 20)
-#define AT91_ADC_IER_YRDY (1 << 21)
-#define AT91_ADC_IER_PRDY (1 << 22)
-#define AT91_ADC_ISR_PENS (1 << 31)
-
-#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
-#define AT91_ADC_DATA (0x3ff)
-
-#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
-
-#define AT91_ADC_ACR 0x94 /* Analog Control Register */
-#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */
-
-#define AT91_ADC_TSMR 0xB0
-#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */
-#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
-#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
-#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
-#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
-#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
-#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
-#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */
-#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */
-#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
-#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */
-#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */
-#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */
-
-#define AT91_ADC_TSXPOSR 0xB4
-#define AT91_ADC_TSYPOSR 0xB8
-#define AT91_ADC_TSPRESSR 0xBC
-
-#define AT91_ADC_TRGR_9260 AT91_ADC_MR
-#define AT91_ADC_TRGR_9G45 0x08
-#define AT91_ADC_TRGR_9X5 0xC0
-
-/* Trigger Register bit field */
-#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
-#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
-#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
-#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/gpio.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <linux/kernel.h>
-#include <asm/irq.h>
-
-#define MAX_GPIO_BANKS 5
-#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32)
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define AT91_PIN_PA0 (0x00 + 0)
-#define AT91_PIN_PA1 (0x00 + 1)
-#define AT91_PIN_PA2 (0x00 + 2)
-#define AT91_PIN_PA3 (0x00 + 3)
-#define AT91_PIN_PA4 (0x00 + 4)
-#define AT91_PIN_PA5 (0x00 + 5)
-#define AT91_PIN_PA6 (0x00 + 6)
-#define AT91_PIN_PA7 (0x00 + 7)
-#define AT91_PIN_PA8 (0x00 + 8)
-#define AT91_PIN_PA9 (0x00 + 9)
-#define AT91_PIN_PA10 (0x00 + 10)
-#define AT91_PIN_PA11 (0x00 + 11)
-#define AT91_PIN_PA12 (0x00 + 12)
-#define AT91_PIN_PA13 (0x00 + 13)
-#define AT91_PIN_PA14 (0x00 + 14)
-#define AT91_PIN_PA15 (0x00 + 15)
-#define AT91_PIN_PA16 (0x00 + 16)
-#define AT91_PIN_PA17 (0x00 + 17)
-#define AT91_PIN_PA18 (0x00 + 18)
-#define AT91_PIN_PA19 (0x00 + 19)
-#define AT91_PIN_PA20 (0x00 + 20)
-#define AT91_PIN_PA21 (0x00 + 21)
-#define AT91_PIN_PA22 (0x00 + 22)
-#define AT91_PIN_PA23 (0x00 + 23)
-#define AT91_PIN_PA24 (0x00 + 24)
-#define AT91_PIN_PA25 (0x00 + 25)
-#define AT91_PIN_PA26 (0x00 + 26)
-#define AT91_PIN_PA27 (0x00 + 27)
-#define AT91_PIN_PA28 (0x00 + 28)
-#define AT91_PIN_PA29 (0x00 + 29)
-#define AT91_PIN_PA30 (0x00 + 30)
-#define AT91_PIN_PA31 (0x00 + 31)
-
-#define AT91_PIN_PB0 (0x20 + 0)
-#define AT91_PIN_PB1 (0x20 + 1)
-#define AT91_PIN_PB2 (0x20 + 2)
-#define AT91_PIN_PB3 (0x20 + 3)
-#define AT91_PIN_PB4 (0x20 + 4)
-#define AT91_PIN_PB5 (0x20 + 5)
-#define AT91_PIN_PB6 (0x20 + 6)
-#define AT91_PIN_PB7 (0x20 + 7)
-#define AT91_PIN_PB8 (0x20 + 8)
-#define AT91_PIN_PB9 (0x20 + 9)
-#define AT91_PIN_PB10 (0x20 + 10)
-#define AT91_PIN_PB11 (0x20 + 11)
-#define AT91_PIN_PB12 (0x20 + 12)
-#define AT91_PIN_PB13 (0x20 + 13)
-#define AT91_PIN_PB14 (0x20 + 14)
-#define AT91_PIN_PB15 (0x20 + 15)
-#define AT91_PIN_PB16 (0x20 + 16)
-#define AT91_PIN_PB17 (0x20 + 17)
-#define AT91_PIN_PB18 (0x20 + 18)
-#define AT91_PIN_PB19 (0x20 + 19)
-#define AT91_PIN_PB20 (0x20 + 20)
-#define AT91_PIN_PB21 (0x20 + 21)
-#define AT91_PIN_PB22 (0x20 + 22)
-#define AT91_PIN_PB23 (0x20 + 23)
-#define AT91_PIN_PB24 (0x20 + 24)
-#define AT91_PIN_PB25 (0x20 + 25)
-#define AT91_PIN_PB26 (0x20 + 26)
-#define AT91_PIN_PB27 (0x20 + 27)
-#define AT91_PIN_PB28 (0x20 + 28)
-#define AT91_PIN_PB29 (0x20 + 29)
-#define AT91_PIN_PB30 (0x20 + 30)
-#define AT91_PIN_PB31 (0x20 + 31)
-
-#define AT91_PIN_PC0 (0x40 + 0)
-#define AT91_PIN_PC1 (0x40 + 1)
-#define AT91_PIN_PC2 (0x40 + 2)
-#define AT91_PIN_PC3 (0x40 + 3)
-#define AT91_PIN_PC4 (0x40 + 4)
-#define AT91_PIN_PC5 (0x40 + 5)
-#define AT91_PIN_PC6 (0x40 + 6)
-#define AT91_PIN_PC7 (0x40 + 7)
-#define AT91_PIN_PC8 (0x40 + 8)
-#define AT91_PIN_PC9 (0x40 + 9)
-#define AT91_PIN_PC10 (0x40 + 10)
-#define AT91_PIN_PC11 (0x40 + 11)
-#define AT91_PIN_PC12 (0x40 + 12)
-#define AT91_PIN_PC13 (0x40 + 13)
-#define AT91_PIN_PC14 (0x40 + 14)
-#define AT91_PIN_PC15 (0x40 + 15)
-#define AT91_PIN_PC16 (0x40 + 16)
-#define AT91_PIN_PC17 (0x40 + 17)
-#define AT91_PIN_PC18 (0x40 + 18)
-#define AT91_PIN_PC19 (0x40 + 19)
-#define AT91_PIN_PC20 (0x40 + 20)
-#define AT91_PIN_PC21 (0x40 + 21)
-#define AT91_PIN_PC22 (0x40 + 22)
-#define AT91_PIN_PC23 (0x40 + 23)
-#define AT91_PIN_PC24 (0x40 + 24)
-#define AT91_PIN_PC25 (0x40 + 25)
-#define AT91_PIN_PC26 (0x40 + 26)
-#define AT91_PIN_PC27 (0x40 + 27)
-#define AT91_PIN_PC28 (0x40 + 28)
-#define AT91_PIN_PC29 (0x40 + 29)
-#define AT91_PIN_PC30 (0x40 + 30)
-#define AT91_PIN_PC31 (0x40 + 31)
-
-#define AT91_PIN_PD0 (0x60 + 0)
-#define AT91_PIN_PD1 (0x60 + 1)
-#define AT91_PIN_PD2 (0x60 + 2)
-#define AT91_PIN_PD3 (0x60 + 3)
-#define AT91_PIN_PD4 (0x60 + 4)
-#define AT91_PIN_PD5 (0x60 + 5)
-#define AT91_PIN_PD6 (0x60 + 6)
-#define AT91_PIN_PD7 (0x60 + 7)
-#define AT91_PIN_PD8 (0x60 + 8)
-#define AT91_PIN_PD9 (0x60 + 9)
-#define AT91_PIN_PD10 (0x60 + 10)
-#define AT91_PIN_PD11 (0x60 + 11)
-#define AT91_PIN_PD12 (0x60 + 12)
-#define AT91_PIN_PD13 (0x60 + 13)
-#define AT91_PIN_PD14 (0x60 + 14)
-#define AT91_PIN_PD15 (0x60 + 15)
-#define AT91_PIN_PD16 (0x60 + 16)
-#define AT91_PIN_PD17 (0x60 + 17)
-#define AT91_PIN_PD18 (0x60 + 18)
-#define AT91_PIN_PD19 (0x60 + 19)
-#define AT91_PIN_PD20 (0x60 + 20)
-#define AT91_PIN_PD21 (0x60 + 21)
-#define AT91_PIN_PD22 (0x60 + 22)
-#define AT91_PIN_PD23 (0x60 + 23)
-#define AT91_PIN_PD24 (0x60 + 24)
-#define AT91_PIN_PD25 (0x60 + 25)
-#define AT91_PIN_PD26 (0x60 + 26)
-#define AT91_PIN_PD27 (0x60 + 27)
-#define AT91_PIN_PD28 (0x60 + 28)
-#define AT91_PIN_PD29 (0x60 + 29)
-#define AT91_PIN_PD30 (0x60 + 30)
-#define AT91_PIN_PD31 (0x60 + 31)
-
-#define AT91_PIN_PE0 (0x80 + 0)
-#define AT91_PIN_PE1 (0x80 + 1)
-#define AT91_PIN_PE2 (0x80 + 2)
-#define AT91_PIN_PE3 (0x80 + 3)
-#define AT91_PIN_PE4 (0x80 + 4)
-#define AT91_PIN_PE5 (0x80 + 5)
-#define AT91_PIN_PE6 (0x80 + 6)
-#define AT91_PIN_PE7 (0x80 + 7)
-#define AT91_PIN_PE8 (0x80 + 8)
-#define AT91_PIN_PE9 (0x80 + 9)
-#define AT91_PIN_PE10 (0x80 + 10)
-#define AT91_PIN_PE11 (0x80 + 11)
-#define AT91_PIN_PE12 (0x80 + 12)
-#define AT91_PIN_PE13 (0x80 + 13)
-#define AT91_PIN_PE14 (0x80 + 14)
-#define AT91_PIN_PE15 (0x80 + 15)
-#define AT91_PIN_PE16 (0x80 + 16)
-#define AT91_PIN_PE17 (0x80 + 17)
-#define AT91_PIN_PE18 (0x80 + 18)
-#define AT91_PIN_PE19 (0x80 + 19)
-#define AT91_PIN_PE20 (0x80 + 20)
-#define AT91_PIN_PE21 (0x80 + 21)
-#define AT91_PIN_PE22 (0x80 + 22)
-#define AT91_PIN_PE23 (0x80 + 23)
-#define AT91_PIN_PE24 (0x80 + 24)
-#define AT91_PIN_PE25 (0x80 + 25)
-#define AT91_PIN_PE26 (0x80 + 26)
-#define AT91_PIN_PE27 (0x80 + 27)
-#define AT91_PIN_PE28 (0x80 + 28)
-#define AT91_PIN_PE29 (0x80 + 29)
-#define AT91_PIN_PE30 (0x80 + 30)
-#define AT91_PIN_PE31 (0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on);
-extern int __init_or_module at91_disable_schmitt_trig(unsigned pin);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-#ifdef CONFIG_PINCTRL_AT91
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#else
-static inline void at91_pinctrl_gpio_suspend(void) {}
-static inline void at91_pinctrl_gpio_resume(void) {}
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
+/*
+ * FIXME: this is needed to communicate between the pinctrl driver and
+ * the PM implementation in the machine. Possibly part of the PM
+ * implementation should be moved down into the pinctrl driver and get
+ * called as part of the generic suspend/resume path.
+ */
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+#endif
#endif
#include <linux/platform_device.h>
#include "board.h"
+#include "gpio.h"
/* ------------------------------------------------------------------------- */
#include "at91_aic.h"
#include "generic.h"
#include "pm.h"
+#include "gpio.h"
/*
* Show the reason for the previous system reset.
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC" if ARCH_MULTI_V7
- depends on MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
select CLKSRC_OF
- select CPU_V6
- select GENERIC_CLOCKEVENTS
select PINCTRL
select PINCTRL_BCM2835
help
config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
- depends on MMU
select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
select MIGHT_HAVE_PCI
0,
};
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
+
void __init dove_init_irq(void)
{
int i;
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(dove_legacy_handle_irq);
+#endif
+
/*
* Initialize gpiolib for GPIOs 0-71.
*/
if ARCH_MULTI_V7
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
- bool "Support i.MX51 platforms from device tree"
- select SOC_IMX51
- help
- Include support for Freescale i.MX51 based platforms
- using the device tree for discovery
-
-config MACH_MX51_BABBAGE
- bool "Support MX51 BABBAGE platforms"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select IMX_HAVE_PLATFORM_SPI_IMX
- select SOC_IMX51
- help
- Include support for MX51 Babbage platform, also known as MX51EVK in
- u-boot. This includes specific configurations for the board and its
- peripherals.
-
-config MACH_EUKREA_CPUIMX51SD
- bool "Support Eukrea CPUIMX51SD module"
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SPI_IMX
- select SOC_IMX51
- help
- Include support for Eukrea CPUIMX51SD platform. This includes
- specific configurations for the module and its peripherals.
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX51SD
- default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
- prompt "Eukrea MBIMXSD development board"
- bool
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
comment "Device tree only"
config SOC_IMX50
help
This enables support for Freescale i.MX50 processor.
+config MACH_IMX51_DT
+ bool "i.MX51 support"
+ select SOC_IMX51
+ help
+ This enables support for Freescale i.MX51 processor
+
config SOC_IMX53
bool "i.MX53 support"
select HAVE_IMX_SRC
help
This enables support for Freescale i.MX6 SoloLite processor.
+config SOC_IMX6SX
+ bool "i.MX6 SoloX support"
+ select PINCTRL_IMX6SX
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 SoloX processor.
+
config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
-# i.MX5 based machines
-obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
-asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
{
u32 nivector;
for (i = 0; i < 8; i++)
__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
+ set_handle_irq(avic_handle_irq);
+
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ(FIQ_START);
* parent - fixed parent. No clk_set_parent support
*/
-#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+struct clk_gate2 {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 bit_idx;
+ u8 flags;
+ spinlock_t *lock;
+ unsigned int *share_count;
+};
+
+#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw)
static int clk_gate2_enable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate2 *gate = to_clk_gate2(hw);
u32 reg;
unsigned long flags = 0;
- if (gate->lock)
- spin_lock_irqsave(gate->lock, flags);
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->share_count && (*gate->share_count)++ > 0)
+ goto out;
reg = readl(gate->reg);
reg |= 3 << gate->bit_idx;
writel(reg, gate->reg);
- if (gate->lock)
- spin_unlock_irqrestore(gate->lock, flags);
+out:
+ spin_unlock_irqrestore(gate->lock, flags);
return 0;
}
static void clk_gate2_disable(struct clk_hw *hw)
{
- struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate2 *gate = to_clk_gate2(hw);
u32 reg;
unsigned long flags = 0;
- if (gate->lock)
- spin_lock_irqsave(gate->lock, flags);
+ spin_lock_irqsave(gate->lock, flags);
+
+ if (gate->share_count && --(*gate->share_count) > 0)
+ goto out;
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
writel(reg, gate->reg);
- if (gate->lock)
- spin_unlock_irqrestore(gate->lock, flags);
+out:
+ spin_unlock_irqrestore(gate->lock, flags);
}
static int clk_gate2_is_enabled(struct clk_hw *hw)
{
u32 reg;
- struct clk_gate *gate = to_clk_gate(hw);
+ struct clk_gate2 *gate = to_clk_gate2(hw);
reg = readl(gate->reg);
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
- u8 clk_gate2_flags, spinlock_t *lock)
+ u8 clk_gate2_flags, spinlock_t *lock,
+ unsigned int *share_count)
{
- struct clk_gate *gate;
+ struct clk_gate2 *gate;
struct clk *clk;
struct clk_init_data init;
- gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL);
if (!gate)
return ERR_PTR(-ENOMEM);
- /* struct clk_gate assignments */
+ /* struct clk_gate2 assignments */
gate->reg = reg;
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
+ gate->share_count = share_count;
init.name = name;
init.ops = &clk_gate2_ops;
#define SCM_GCCR IO_ADDR_SCM(0xc)
static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
-static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
- "fclk", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
+ "prem", "fclk", };
+
enum imx1_clks {
- dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
- fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
- mma_gate, usbd_gate, clk_max
+ dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
+ spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
+ uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
+ usbd_gate, clk_max
};
static struct clk *clk[clk_max];
clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
ARRAY_SIZE(prem_sel_clks));
clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+ clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+ clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
- clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
- clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
- clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
- clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
- clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
- clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+ clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+ clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+ clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+ clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+ clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+ clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
ARRAY_SIZE(clko_sel_clks));
- clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+ clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+ clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+ clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+ clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
- clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
- clk_register_clkdev(clk[mma_gate], "mma", NULL);
- clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
- clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
- clk_register_clkdev(clk[hclk], "mshc", NULL);
- clk_register_clkdev(clk[per3], "ssi", NULL);
- clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");
- clk_register_clkdev(clk[clko], "clko", NULL);
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
static const char *per_sel_clks[] = { "ahb", "upll", };
+static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb",
+ "ipg", "dummy", "dummy", "dummy",
+ "dummy", "dummy", "per0", "per2",
+ "per13", "per14", "usbotg_ahb", "dummy",};
enum mx25_clks {
dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
- wdt_ipg, clk_max
+ wdt_ipg, cko_div, cko_sel, cko, clk_max
};
static struct clk *clk[clk_max];
clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6);
+ clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks));
+ clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30);
clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+ /*
+ * Let's initially set up CLKO parent as ipg, since this configuration
+ * is used on some imx25 board designs to clock the audio codec.
+ */
+ clk_set_parent(clk[cko_sel], clk[ipg]);
+
return 0;
}
int __init mx25_clocks_init_dt(void)
{
struct device_node *np;
- void __iomem *base;
- int irq;
unsigned long osc_rate = 24000000;
/* retrieve the freqency of fixed clocks from device tree */
__mx25_clocks_init(osc_rate);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
-
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
return 0;
}
csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
- mpll_sel, spll_gate, clk_max
+ mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate,
+ rtic_ahb_gate, mshc_baud_gate, clk_max
};
static struct clk *clk[clk_max];
clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
}
+ clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1");
- clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2");
- clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3");
- clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
- clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
- clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
- clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
- clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
- clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
- clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
- clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
- clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
return 0;
}
-#ifdef CONFIG_OF
int __init mx27_clocks_init_dt(void)
{
struct device_node *np;
return mx27_clocks_init(fref);
}
-#endif
return 0;
}
-#ifdef CONFIG_OF
int __init mx31_clocks_init_dt(void)
{
struct device_node *np;
return mx31_clocks_init(fref);
}
-#endif
static void __init mx50_clocks_init(struct device_node *np)
{
- void __iomem *base;
unsigned long r;
- int i, irq;
+ int i;
clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"));
}
CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL);
- clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx51-vpu.0");
clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0");
clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0");
clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0");
static void __init mx53_clocks_init(struct device_node *np)
{
- int i, irq;
+ int i;
unsigned long r;
- void __iomem *base;
clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
mx5_clocks_common_init(0, 0, 0, 0);
- clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx53-vpu.0");
clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0");
clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0");
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"));
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
- lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max
};
static struct clk *clk[clk_max];
{ /* sentinel */ }
};
+static unsigned int share_count_esai;
+
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
- int i, irq;
+ int i;
int ret;
clk[dummy] = imx_clk_fixed("dummy", 0);
* the "output_enable" bit as a gate, even though it's really just
* enabling clock output.
*/
- clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
- clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels));
- clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels));
- clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels));
- clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels));
+ clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+ clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
- clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ if (cpu_is_imx6dl())
+ /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */
+ clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
+ else
+ clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16);
+ clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
if (cpu_is_imx6dl())
clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
}
+ clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
+ clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
+ clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
+ clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
* We can not get the 100MHz from the pll2_pfd0_352m.
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"));
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
{
struct device_node *np;
void __iomem *base;
- int irq;
int i;
int ret;
imx6q_set_lpm(WAIT_CLOCKED);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
--- /dev/null
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/types.h>
+
+#include "clk.h"
+#include "common.h"
+
+#define CCDR 0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16)
+
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
+static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", };
+static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", };
+static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
+static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
+static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
+static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *pcie_axi_sels[] = { "axi", "ahb", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", };
+static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *perclk_sels[] = { "ipg", "osc", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", };
+static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", };
+static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", };
+static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
+static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", };
+static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *ecspi_sels[] = { "pll3_60m", "osc", };
+static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
+static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", };
+static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", };
+static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *cko1_sels[] = {
+ "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
+ "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix",
+ "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div",
+};
+static const char *cko2_sels[] = {
+ "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck",
+ "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core",
+ "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core",
+ "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy",
+ "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial",
+ "spdif", "asrc", "dummy",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+ "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div",
+ "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2",
+};
+
+static struct clk *clks[IMX6SX_CLK_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static int const clks_init_on[] __initconst = {
+ IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
+ IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
+ IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
+ IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
+ IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4,
+ IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG,
+ IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5,
+ IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG,
+ IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1,
+ IMX6SX_CLK_EPIT2,
+};
+
+static struct clk_div_table clk_enet_ref_table[] = {
+ { .val = 0, .div = 20, },
+ { .val = 1, .div = 10, },
+ { .val = 2, .div = 5, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static struct clk_div_table post_div_table[] = {
+ { .val = 2, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 0, .div = 4, },
+ { }
+};
+
+static struct clk_div_table video_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 1, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static u32 share_count_asrc;
+static u32 share_count_audio;
+static u32 share_count_esai;
+
+static void __init imx6sx_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i;
+
+ clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+
+ clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
+ clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
+
+ /* ipp_di clock is external input */
+ clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
+ clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* type name parent_name base div_mask */
+ clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
+ clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
+ clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
+ clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
+ clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
+ clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
+ clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3);
+
+ /*
+ * Bit 20 is the reserved and read-only bit, we do this only for:
+ * - Do nothing for usbphy clk_enable/disable
+ * - Keep refcount when do usbphy clk_enable/disable, in that case,
+ * the clk framework may need to enable/disable usbphy's parent
+ */
+ clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+ /*
+ * usbphy*_gate needs to be on after system boots up, and software
+ * never needs to control it anymore.
+ */
+ clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+ /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */
+ clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
+ clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+ clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10);
+
+ clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
+ base + 0xe0, 2, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
+
+ clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+ clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21);
+
+ /* name parent_name reg idx */
+ clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3);
+ clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+
+ clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
+ CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video",
+ CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ np = ccm_node;
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ imx6q_pm_set_ccm_base(base);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels));
+ clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+ clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels));
+ clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+ clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
+ clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels));
+ clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
+ clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels));
+ clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels));
+ clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels));
+ clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels));
+ clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
+ clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels));
+ clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels));
+ clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels));
+ clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
+ clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+
+ clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT);
+
+ /* name parent_name reg shift width */
+ clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3);
+ clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3);
+ clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3);
+ clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
+ clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
+ clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3);
+ clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
+ clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2);
+ clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
+ clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6);
+ clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3);
+ clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6);
+ clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3);
+ clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3);
+ clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3);
+ clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3);
+ clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6);
+ clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3);
+ clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3);
+ clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3);
+ clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
+ clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+
+ clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7);
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+ /* name parent_name reg shift width busy: reg, shift */
+ clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+ clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+
+ /* name parent_name reg shift */
+ /* CCGR0 */
+ clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
+ clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
+ clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8);
+ clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
+ clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
+ clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
+ clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
+ clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24);
+ clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26);
+ clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
+
+ /* CCGR1 */
+ clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
+ clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2);
+ clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4);
+ clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6);
+ clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8);
+ clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
+ clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
+ clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18);
+ clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20);
+ clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
+ clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26);
+ clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30);
+
+ /* CCGR2 */
+ clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
+ clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
+ clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
+ clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
+ clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
+ clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14);
+ clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16);
+ clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18);
+ clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20);
+ clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22);
+ clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28);
+ clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30);
+
+ /* CCGR3 */
+ clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2);
+ clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4);
+ clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4);
+ clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6);
+ clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8);
+ clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10);
+ clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12);
+ clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
+ clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18);
+ clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
+ clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24);
+ clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
+
+ /* CCGR4 */
+ clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0);
+ clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10);
+ clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14);
+ clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
+ clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
+ clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
+ clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
+ clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28);
+ clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+
+ /* CCGR5 */
+ clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18);
+ clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20);
+ clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22);
+ clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
+ clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30);
+ clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30);
+
+ /* CCGR6 */
+ clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
+ clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16);
+ clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20);
+ clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22);
+ clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
+ clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26);
+ clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28);
+ clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30);
+
+ clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+
+ /* mask handshake of mmdc */
+ writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);
+ }
+
+ /* Set the default 132MHz for EIM module */
+ clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000);
+
+ /* set parent clock for LCDIF1 pixel clock */
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]);
+
+ /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
+ if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M]))
+ pr_err("Failed to set pcie bus parent clk.\n");
+ if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI]))
+ pr_err("Failed to set pcie parent clk.\n");
+
+ /*
+ * Init enet system AHB clock, set to 200Mhz
+ * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+ */
+ clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000);
+
+ /* Audio clocks */
+ clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000);
+
+ clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+ clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000);
+
+ clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000);
+
+ /* Set parent clock for vadc */
+ clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+
+ /* default parent of can_sel clock is invalid, manually set it here */
+ clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]);
+
+ /* Update gpu clock from default 528M to 720M */
+ clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+ clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
+ mxc_timer_init_dt(np);
+}
+CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
struct clk *clk_register_gate2(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 bit_idx,
- u8 clk_gate_flags, spinlock_t *lock);
+ u8 clk_gate_flags, spinlock_t *lock,
+ unsigned int *share_count);
struct clk * imx_obtain_fixed_clock(
const char *name, unsigned long rate);
void __iomem *reg, u8 shift)
{
return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
- shift, 0, &imx_ccm_lock);
+ shift, 0, &imx_ccm_lock, NULL);
+}
+
+static inline struct clk *imx_clk_gate2_shared(const char *name,
+ const char *parent, void __iomem *reg, u8 shift,
+ unsigned int *share_count)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock, share_count);
}
struct clk *imx_clk_pfd(const char *name, const char *parent_name,
struct platform_device;
struct pt_regs;
struct clk;
+struct device_node;
enum mxc_cpu_pwr_mode;
void mx1_map_io(void);
void imx53_init_late(void);
void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
+void mxc_timer_init_dt(struct device_node *);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
void imx_print_silicon_rev(const char *cpu, int srev);
-void avic_handle_irq(struct pt_regs *);
-void tzic_handle_irq(struct pt_regs *);
-
-#define imx1_handle_irq avic_handle_irq
-#define imx21_handle_irq avic_handle_irq
-#define imx25_handle_irq avic_handle_irq
-#define imx27_handle_irq avic_handle_irq
-#define imx31_handle_irq avic_handle_irq
-#define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
-#define imx51_handle_irq tzic_handle_irq
-#define imx53_handle_irq tzic_handle_irq
-
void imx_enable_cpu(int cpu, bool enable);
void imx_set_cpu_jump(int cpu, void *jump_addr);
u32 imx_get_cpu_arg(int cpu);
case MXC_CPU_IMX6DL:
soc_id = "i.MX6DL";
break;
+ case MXC_CPU_IMX6SX:
+ soc_id = "i.MX6SX";
+ break;
case MXC_CPU_IMX6Q:
soc_id = "i.MX6Q";
break;
#define imx_mx2_emmaprp_data_entry_single(soc) \
{ \
.iobase = soc ## _EMMAPRP_BASE_ADDR, \
- .iosize = SZ_32, \
+ .iosize = SZ_256, \
.irq = soc ## _INT_EMMAPRP, \
}
+++ /dev/null
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <video/platform_lcd.h>
-#include <linux/backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
- /* LED */
- MX51_PAD_NANDF_D10__GPIO3_30,
- /* SWITCH */
- NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
- /* UART 3 */
- MX51_PAD_UART3_RXD__UART3_RXD,
- MX51_PAD_UART3_TXD__UART3_TXD,
- MX51_PAD_KEY_COL4__UART3_RTS,
- MX51_PAD_KEY_COL5__UART3_CTS,
- /* SD */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
- /* SD1 CD */
- NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- /* SSI */
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
- MX51_PAD_AUD3_BB_CK__AUD3_TXC,
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
- /* LCD Backlight */
- MX51_PAD_DI1_D1_CS__GPIO3_4,
- /* LCD RST */
- MX51_PAD_CSI1_D9__GPIO3_13,
-};
-
-#define GPIO_LED1 IMX_GPIO_NR(3, 30)
-#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31)
-#define GPIO_LCDRST IMX_GPIO_NR(3, 13)
-#define GPIO_LCDBL IMX_GPIO_NR(3, 4)
-
-static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(GPIO_LCDRST, 1);
- else
- gpio_direction_output(GPIO_LCDRST, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = {
- .set_power = eukrea_mbimxsd51_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd51_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.platform_data = &eukrea_mbimxsd51_lcd_power_data,
-};
-
-static void eukrea_mbimxsd51_bl_set_intensity(int intensity)
-{
- if (intensity)
- gpio_direction_output(GPIO_LCDBL, 1);
- else
- gpio_direction_output(GPIO_LCDBL, 0);
-}
-
-static struct generic_bl_info eukrea_mbimxsd51_bl_info = {
- .name = "eukrea_mbimxsd51-bl",
- .max_intensity = 0xff,
- .default_intensity = 0xff,
- .set_bl_intensity = eukrea_mbimxsd51_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimxsd51_bl_dev = {
- .name = "generic-bl",
- .id = 1,
- .dev = {
- .platform_data = &eukrea_mbimxsd51_bl_info,
- },
-};
-
-static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_LED1,
- },
-};
-
-static const struct gpio_led_platform_data
- eukrea_mbimxsd51_led_info __initconst = {
- .leds = eukrea_mbimxsd51_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd51_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = {
- {
- .gpio = GPIO_SWITCH1,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data
- eukrea_mbimxsd51_button_data __initconst = {
- .buttons = eukrea_mbimxsd51_gpio_buttons,
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = {
- .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static int screen_type;
-
-static int __init eukrea_mbimxsd51_screen_type(char *options)
-{
- if (!strcmp(options, "dvi"))
- screen_type = 1;
- else if (!strcmp(options, "tft"))
- screen_type = 0;
-
- return 0;
-}
-__setup("screen_type=", eukrea_mbimxsd51_screen_type);
-
-/*
- * system init for baseboard usage. Will be called by cpuimx51sd init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd51_baseboard_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads,
- ARRAY_SIZE(eukrea_mbimxsd51_pads)))
- printk(KERN_ERR "error setting mbimxsd pads !\n");
-
- imx51_add_imx_uart(1, NULL);
- imx51_add_imx_uart(2, &uart_pdata);
-
- imx51_add_sdhci_esdhc_imx(0, NULL);
-
- imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata);
-
- gpio_request(GPIO_LED1, "LED1");
- gpio_direction_output(GPIO_LED1, 1);
- gpio_free(GPIO_LED1);
-
- gpio_request(GPIO_SWITCH1, "SWITCH1");
- gpio_direction_input(GPIO_SWITCH1);
- gpio_free(GPIO_SWITCH1);
-
- gpio_request(GPIO_LCDRST, "LCDRST");
- gpio_direction_output(GPIO_LCDRST, 0);
- gpio_request(GPIO_LCDBL, "LCDBL");
- gpio_direction_output(GPIO_LCDBL, 0);
- if (!screen_type) {
- platform_device_register(&eukrea_mbimxsd51_bl_dev);
- platform_device_register(&eukrea_mbimxsd51_lcd_powerdev);
- } else {
- gpio_free(GPIO_LCDRST);
- gpio_free(GPIO_LCDBL);
- }
-
- i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices,
- ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices));
-
- gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
- imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
- imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .handle_irq = imx25_handle_irq,
.init_time = imx25_timer_init,
.init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = imx27_timer_init,
.init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = imx31_dt_timer_init,
.init_machine = imx31_dt_init,
.dt_compat = imx31_dt_board_compat,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = imx35_irq_init,
- .handle_irq = imx35_handle_irq,
.init_machine = imx35_dt_init,
.dt_compat = imx35_dt_board_compat,
.restart = mxc_restart,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
.init_machine = imx51_dt_init,
.init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = apf9328_timer_init,
.init_machine = apf9328_init,
.restart = mxc_restart,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = armadillo5x0_timer_init,
.init_machine = armadillo5x0_init,
.restart = mxc_restart,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = bug_timer_init,
.init_machine = bug_board_init,
.restart = mxc_restart,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = eukrea_cpuimx27_timer_init,
.init_machine = eukrea_cpuimx27_init,
.restart = mxc_restart,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = eukrea_cpuimx35_timer_init,
.init_machine = eukrea_cpuimx35_init,
.restart = mxc_restart,
+++ /dev/null
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define USBH1_RST IMX_GPIO_NR(2, 28)
-#define ETH_RST IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO_REV2 IMX_GPIO_NR(3, 12)
-#define TSC2007_IRQGPIO_REV3 IMX_GPIO_NR(4, 0)
-#define CAN_IRQGPIO IMX_GPIO_NR(1, 1)
-#define CAN_RST IMX_GPIO_NR(4, 15)
-#define CAN_NCS IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF_REV2 IMX_GPIO_NR(1, 4)
-#define CAN_RXOBF_REV3 IMX_GPIO_NR(3, 12)
-#define CAN_RX1BF IMX_GPIO_NR(1, 6)
-#define CAN_TXORTS IMX_GPIO_NR(1, 7)
-#define CAN_TX1RTS IMX_GPIO_NR(1, 8)
-#define CAN_TX2RTS IMX_GPIO_NR(1, 9)
-#define I2C_SCL IMX_GPIO_NR(4, 16)
-#define I2C_SDA IMX_GPIO_NR(4, 17)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
- MX51_PAD_USBH1_STP__USBH1_STP,
- MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */
-
- /* FEC */
- MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */
-
- /* HSI2C */
- MX51_PAD_I2C1_CLK__GPIO4_16,
- MX51_PAD_I2C1_DAT__GPIO4_17,
-
- /* I2C1 */
- MX51_PAD_SD2_CMD__I2C1_SCL,
- MX51_PAD_SD2_CLK__I2C1_SDA,
-
- /* CAN */
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */
- MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */
- MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */
- MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */
- MX51_PAD_GPIO1_6__GPIO1_6,
- MX51_PAD_GPIO1_7__GPIO1_7,
- MX51_PAD_GPIO1_8__GPIO1_8,
- MX51_PAD_GPIO1_9__GPIO1_9,
-
- /* Touchscreen */
- /* IRQ */
- NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
- NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP |
- PAD_CTL_PKE | PAD_CTL_SRE_FAST |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int tsc2007_get_pendown_state(struct device *dev)
-{
- if (mx51_revision() < IMX_CHIP_REVISION_3_0)
- return !gpio_get_value(TSC2007_IRQGPIO_REV2);
- else
- return !gpio_get_value(TSC2007_IRQGPIO_REV3);
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("tsc2007", 0x49),
- .platform_data = &tsc2007_info,
- },
-};
-
-static const struct mxc_nand_platform_data
- eukrea_cpuimx51sd_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
- usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx51sd_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = I2C_SDA,
- .sda_is_open_drain = 0,
- .scl_pin = I2C_SCL,
- .scl_is_open_drain = 0,
- .udelay = 2,
-};
-
-static struct platform_device hsi2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
- .oscillator_frequency = 24E6,
-};
-
-static struct spi_board_info cpuimx51sd_spi_device[] = {
- {
- .modalias = "mcp2515",
- .max_speed_hz = 10000000,
- .bus_num = 0,
- .mode = SPI_MODE_0,
- .chip_select = 0,
- .platform_data = &mcp251x_info,
- /* irq number is run-time assigned */
- },
-};
-
-static int cpuimx51sd_spi1_cs[] = {
- CAN_NCS,
-};
-
-static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
- .chipselect = cpuimx51sd_spi1_cs,
- .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs),
-};
-
-static struct platform_device *rev2_platform_devices[] __initdata = {
- &hsi2c_gpio_device,
-};
-
-static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static void __init eukrea_cpuimx51sd_init(void)
-{
- imx51_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
- ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
- imx51_add_imx2_wdt(0);
-
- gpio_request(ETH_RST, "eth_rst");
- gpio_set_value(ETH_RST, 1);
- imx51_add_fec(NULL);
-
- gpio_request(CAN_IRQGPIO, "can_irq");
- gpio_direction_input(CAN_IRQGPIO);
- gpio_free(CAN_IRQGPIO);
- gpio_request(CAN_NCS, "can_ncs");
- gpio_direction_output(CAN_NCS, 1);
- gpio_free(CAN_NCS);
- gpio_request(CAN_RST, "can_rst");
- gpio_direction_output(CAN_RST, 0);
- msleep(20);
- gpio_set_value(CAN_RST, 1);
- imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
- cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO);
- spi_register_board_info(cpuimx51sd_spi_device,
- ARRAY_SIZE(cpuimx51sd_spi_device));
-
- if (mx51_revision() < IMX_CHIP_REVISION_3_0) {
- eukrea_cpuimx51sd_i2c_devices[1].irq =
- gpio_to_irq(TSC2007_IRQGPIO_REV2),
- platform_add_devices(rev2_platform_devices,
- ARRAY_SIZE(rev2_platform_devices));
- gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq");
- gpio_direction_input(TSC2007_IRQGPIO_REV2);
- gpio_free(TSC2007_IRQGPIO_REV2);
- } else {
- eukrea_cpuimx51sd_i2c_devices[1].irq =
- gpio_to_irq(TSC2007_IRQGPIO_REV3),
- imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data);
- gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq");
- gpio_direction_input(TSC2007_IRQGPIO_REV3);
- gpio_free(TSC2007_IRQGPIO_REV3);
- }
-
- i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
-
- gpio_request(USBH1_RST, "usb_rst");
- gpio_direction_output(USBH1_RST, 0);
- msleep(20);
- gpio_set_value(USBH1_RST, 1);
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
- eukrea_mbimxsd51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51sd_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
- /* Maintainer: Eric Bénard <eric@eukrea.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_time = eukrea_cpuimx51sd_timer_init,
- .init_machine = eukrea_cpuimx51sd_init,
- .init_late = imx51_init_late,
- .restart = mxc_restart,
-MACHINE_END
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .handle_irq = imx25_handle_irq,
.init_time = eukrea_cpuimx25_timer_init,
.init_machine = eukrea_cpuimx25_init,
.restart = mxc_restart,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = visstrim_m10_timer_init,
.init_machine = visstrim_m10_board_init,
.restart = mxc_restart,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27ipcam_timer_init,
.init_machine = mx27ipcam_init,
.restart = mxc_restart,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27lite_timer_init,
.init_machine = mx27lite_init,
.restart = mxc_restart,
DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
.map_io = mx53_map_io,
.init_irq = mx53_init_irq,
- .handle_irq = imx50_handle_irq,
.init_machine = imx50_dt_init,
.dt_compat = imx50_dt_board_compat,
.restart = mxc_restart,
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
- .handle_irq = imx53_handle_irq,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
--- /dev/null
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx6sx_init_machine(void)
+{
+ struct device *parent;
+
+ mxc_arch_reset_init_dt();
+
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+ imx_anatop_init();
+}
+
+static void __init imx6sx_init_irq(void)
+{
+ imx_init_revision_from_anatop();
+ imx_init_l2cache();
+ imx_src_init();
+ imx_gpc_init();
+ irqchip_init();
+}
+
+static const char *imx6sx_dt_compat[] __initconst = {
+ "fsl,imx6sx",
+ NULL,
+};
+
+DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
+ .map_io = debug_ll_io_init,
+ .init_irq = imx6sx_init_irq,
+ .init_machine = imx6sx_init_machine,
+ .dt_compat = imx6sx_dt_compat,
+ .restart = mxc_restart,
+MACHINE_END
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = kzm_timer_init,
.init_machine = kzm_board_init,
.restart = mxc_restart,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = mx1ads_timer_init,
.init_machine = mx1ads_init,
.restart = mxc_restart,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = mx1ads_timer_init,
.init_machine = mx1ads_init,
.restart = mxc_restart,
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
+#include <linux/basic_mmio_gpio.h>
#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx21.h"
#include "hardware.h"
#include "iomux-mx21.h"
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE 0xc00000
-
-#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
- (MX21ADS_MMIO_BASE_ADDR + (offset))
+#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000)
+#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000)
+#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000)
-#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
-#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
+#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25)
+#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
+#define MX21ADS_MMGPIO_BASE (6 * 32)
/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP 0x0001 /* read */
-#define MX21ADS_IO_TP6 0x0001 /* write */
-#define MX21ADS_IO_SW_SEL 0x0002 /* read */
-#define MX21ADS_IO_TP7 0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE 0x0008
-#define MX21ADS_IO_CSI_CTL2 0x0010
-#define MX21ADS_IO_CSI_CTL1 0x0020
-#define MX21ADS_IO_CSI_CTL0 0x0040
-#define MX21ADS_IO_UART1_EN 0x0080
-#define MX21ADS_IO_UART4_EN 0x0100
-#define MX21ADS_IO_LCDON 0x0200
-#define MX21ADS_IO_IRDA_EN 0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B 0x1000
-#define MX21ADS_IO_IRDA_MD1 0x2000
-#define MX21ADS_IO_LED4_ON 0x4000
-#define MX21ADS_IO_LED3_ON 0x8000
+#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0)
+#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP)
+#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1)
+#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL)
+#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2)
+#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3)
+#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4)
+#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5)
+#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6)
+#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7)
+#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8)
+#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9)
+#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10)
+#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11)
+#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12)
+#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13)
+#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14)
+#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15)
static const int mx21ads_pins[] __initconst = {
.width = 4,
};
-static struct resource mx21ads_flash_resource = {
- .start = MX21_CS0_BASE_ADDR,
- .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
- .flags = IORESOURCE_MEM,
-};
+static struct resource mx21ads_flash_resource =
+ DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M);
static struct platform_device mx21ads_nor_mtd_device = {
.name = "physmap-flash",
};
static struct resource mx21ads_cs8900_resources[] __initdata = {
- DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
+ DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K),
/* irq number is run-time assigned */
DEFINE_RES_IRQ(-1),
};
static const struct imxuart_platform_data uart_pdata_norts __initconst = {
};
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
- u16 tmp;
+static struct resource mx21ads_mmgpio_resource =
+ DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
- tmp = __raw_readw(MX21ADS_IO_REG);
- tmp |= MX21ADS_IO_LCDON;
- __raw_writew(tmp, MX21ADS_IO_REG);
- return 0;
-}
+static struct bgpio_pdata mx21ads_mmgpio_pdata = {
+ .base = MX21ADS_MMGPIO_BASE,
+ .ngpio = 16,
+};
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
- u16 tmp;
+static struct platform_device mx21ads_mmgpio = {
+ .name = "basic-mmio-gpio",
+ .id = PLATFORM_DEVID_AUTO,
+ .resource = &mx21ads_mmgpio_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &mx21ads_mmgpio_pdata,
+ },
+};
- tmp = __raw_readw(MX21ADS_IO_REG);
- tmp &= ~MX21ADS_IO_LCDON;
- __raw_writew(tmp, MX21ADS_IO_REG);
-}
+static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer =
+ REGULATOR_SUPPLY("lcd", "imx-fb.0");
+
+static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = &mx21ads_lcd_regulator_consumer,
+ .num_consumer_supplies = 1,
+};
+
+static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
+ .supply_name = "LCD",
+ .microvolts = 3300000,
+ .gpio = MX21ADS_IO_LCDON,
+ .enable_high = 1,
+ .init_data = &mx21ads_lcd_regulator_init_data,
+};
+
+static struct platform_device mx21ads_lcd_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = PLATFORM_DEVID_AUTO,
+ .dev = {
+ .platform_data = &mx21ads_lcd_regulator_pdata,
+ },
+};
/*
* Connected is a portrait Sharp-QVGA display
.pwmr = 0x00a903ff,
.lscr1 = 0x00120300,
.dmacr = 0x00020008,
-
- .init = mx21ads_fb_init,
- .exit = mx21ads_fb_exit,
};
static int mx21ads_sdhc_get_ro(struct device *dev)
{
- return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+ return gpio_get_value(MX21ADS_IO_SD_WP);
}
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
- return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
- IRQF_TRIGGER_FALLING, "mmc-detect", data);
+ int ret;
+
+ ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro");
+ if (ret)
+ return ret;
+
+ return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
{
- free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
+ free_irq(gpio_to_irq(MX21ADS_MMC_CD), data);
+ gpio_free(MX21ADS_IO_SD_WP);
}
static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
.hw_ecc = 1,
};
-static struct map_desc mx21ads_io_desc[] __initdata = {
- /*
- * Memory-mapped I/O on MX21ADS Base board:
- * - CS8900A Ethernet controller
- * - ST16C2552CJ UART
- * - CPU and Base board version
- * - Base board I/O register
- */
- {
- .virtual = MX21ADS_MMIO_BASE_ADDR,
- .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
- .length = MX21ADS_MMIO_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static void __init mx21ads_map_io(void)
-{
- mx21_map_io();
- iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
static struct platform_device *platform_devices[] __initdata = {
+ &mx21ads_mmgpio,
+ &mx21ads_lcd_regulator,
&mx21ads_nor_mtd_device,
};
imx21_add_imx_uart0(&uart_pdata_rts);
imx21_add_imx_uart2(&uart_pdata_norts);
imx21_add_imx_uart3(&uart_pdata_rts);
- imx21_add_imx_fb(&mx21ads_fb_data);
imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+ imx21_add_imx_fb(&mx21ads_fb_data);
+
mx21ads_cs8900_resources[1].start =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
mx21ads_cs8900_resources[1].end =
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.atag_offset = 0x100,
- .map_io = mx21ads_map_io,
+ .map_io = mx21_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
- .handle_irq = imx21_handle_irq,
.init_time = mx21ads_timer_init,
.init_machine = mx21ads_board_init,
.restart = mxc_restart,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .handle_irq = imx25_handle_irq,
.init_time = mx25pdk_timer_init,
.init_machine = mx25pdk_init,
.restart = mxc_restart,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27pdk_timer_init,
.init_machine = mx27pdk_init,
.restart = mxc_restart,
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mx27ads_timer_init,
.init_machine = mx27ads_board_init,
.restart = mxc_restart,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31_3ds_timer_init,
.init_machine = mx31_3ds_init,
.reserve = mx31_3ds_reserve,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31ads_timer_init,
.init_machine = mx31ads_init,
.restart = mxc_restart,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31lilly_timer_init,
.init_machine = mx31lilly_board_init,
.restart = mxc_restart,
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31lite_timer_init,
.init_machine = mx31lite_init,
.restart = mxc_restart,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = mx31moboard_timer_init,
.init_machine = mx31moboard_init,
.restart = mxc_restart,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = mx35pdk_timer_init,
.init_machine = mx35_3ds_init,
.reserve = mx35_3ds_reserve,
+++ /dev/null
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
-#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
-#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5)
-#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14)
-#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
-#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
-#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25)
-#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6)
-#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET 0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
-
-#define MX51_USB_PLLDIV_12_MHZ 0x00
-#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
-#define MX51_USB_PLL_DIV_24_MHZ 0x02
-
-static struct gpio_keys_button babbage_buttons[] = {
- {
- .gpio = BABBAGE_POWER_KEY,
- .code = BTN_0,
- .desc = "PWR",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data imx_button_data __initconst = {
- .buttons = babbage_buttons,
- .nbuttons = ARRAY_SIZE(babbage_buttons),
-};
-
-static iomux_v3_cfg_t mx51babbage_pads[] = {
- /* UART1 */
- MX51_PAD_UART1_RXD__UART1_RXD,
- MX51_PAD_UART1_TXD__UART1_TXD,
- MX51_PAD_UART1_RTS__UART1_RTS,
- MX51_PAD_UART1_CTS__UART1_CTS,
-
- /* UART2 */
- MX51_PAD_UART2_RXD__UART2_RXD,
- MX51_PAD_UART2_TXD__UART2_TXD,
-
- /* UART3 */
- MX51_PAD_EIM_D25__UART3_RXD,
- MX51_PAD_EIM_D26__UART3_TXD,
- MX51_PAD_EIM_D27__UART3_RTS,
- MX51_PAD_EIM_D24__UART3_CTS,
-
- /* I2C1 */
- MX51_PAD_EIM_D16__I2C1_SDA,
- MX51_PAD_EIM_D19__I2C1_SCL,
-
- /* I2C2 */
- MX51_PAD_KEY_COL4__I2C2_SCL,
- MX51_PAD_KEY_COL5__I2C2_SDA,
-
- /* HSI2C */
- MX51_PAD_I2C1_CLK__I2C1_CLK,
- MX51_PAD_I2C1_DAT__I2C1_DAT,
-
- /* USB HOST1 */
- MX51_PAD_USBH1_CLK__USBH1_CLK,
- MX51_PAD_USBH1_DIR__USBH1_DIR,
- MX51_PAD_USBH1_NXT__USBH1_NXT,
- MX51_PAD_USBH1_DATA0__USBH1_DATA0,
- MX51_PAD_USBH1_DATA1__USBH1_DATA1,
- MX51_PAD_USBH1_DATA2__USBH1_DATA2,
- MX51_PAD_USBH1_DATA3__USBH1_DATA3,
- MX51_PAD_USBH1_DATA4__USBH1_DATA4,
- MX51_PAD_USBH1_DATA5__USBH1_DATA5,
- MX51_PAD_USBH1_DATA6__USBH1_DATA6,
- MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
- /* USB HUB reset line*/
- MX51_PAD_GPIO1_7__GPIO1_7,
-
- /* USB PHY reset line */
- MX51_PAD_EIM_D21__GPIO2_5,
-
- /* FEC */
- MX51_PAD_EIM_EB2__FEC_MDIO,
- MX51_PAD_EIM_EB3__FEC_RDATA1,
- MX51_PAD_EIM_CS2__FEC_RDATA2,
- MX51_PAD_EIM_CS3__FEC_RDATA3,
- MX51_PAD_EIM_CS4__FEC_RX_ER,
- MX51_PAD_EIM_CS5__FEC_CRS,
- MX51_PAD_NANDF_RB2__FEC_COL,
- MX51_PAD_NANDF_RB3__FEC_RX_CLK,
- MX51_PAD_NANDF_D9__FEC_RDATA0,
- MX51_PAD_NANDF_D8__FEC_TDATA0,
- MX51_PAD_NANDF_CS2__FEC_TX_ER,
- MX51_PAD_NANDF_CS3__FEC_MDC,
- MX51_PAD_NANDF_CS4__FEC_TDATA1,
- MX51_PAD_NANDF_CS5__FEC_TDATA2,
- MX51_PAD_NANDF_CS6__FEC_TDATA3,
- MX51_PAD_NANDF_CS7__FEC_TX_EN,
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
-
- /* FEC PHY reset line */
- MX51_PAD_EIM_A20__GPIO2_14,
-
- /* SD 1 */
- MX51_PAD_SD1_CMD__SD1_CMD,
- MX51_PAD_SD1_CLK__SD1_CLK,
- MX51_PAD_SD1_DATA0__SD1_DATA0,
- MX51_PAD_SD1_DATA1__SD1_DATA1,
- MX51_PAD_SD1_DATA2__SD1_DATA2,
- MX51_PAD_SD1_DATA3__SD1_DATA3,
- /* CD/WP from controller */
- MX51_PAD_GPIO1_0__SD1_CD,
- MX51_PAD_GPIO1_1__SD1_WP,
-
- /* SD 2 */
- MX51_PAD_SD2_CMD__SD2_CMD,
- MX51_PAD_SD2_CLK__SD2_CLK,
- MX51_PAD_SD2_DATA0__SD2_DATA0,
- MX51_PAD_SD2_DATA1__SD2_DATA1,
- MX51_PAD_SD2_DATA2__SD2_DATA2,
- MX51_PAD_SD2_DATA3__SD2_DATA3,
- /* CD/WP gpio */
- MX51_PAD_GPIO1_6__GPIO1_6,
- MX51_PAD_GPIO1_5__GPIO1_5,
-
- /* eCSPI1 */
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
- MX51_PAD_CSPI1_SS0__GPIO4_24,
- MX51_PAD_CSPI1_SS1__GPIO4_25,
-
- /* Audio */
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
- MX51_PAD_AUD3_BB_CK__AUD3_TXC,
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
- .bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
- .bitrate = 400000,
-};
-
-static struct gpio mx51_babbage_usbh1_gpios[] = {
- { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
- { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
-};
-
-static int gpio_usbh1_active(void)
-{
- iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
- int ret;
-
- /* Set USBH1_STP to GPIO and toggle it */
- mxc_iomux_v3_setup_pad(usbh1stp_gpio);
- ret = gpio_request_array(mx51_babbage_usbh1_gpios,
- ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-
- if (ret) {
- pr_debug("failed to get USBH1 pins: %d\n", ret);
- return ret;
- }
-
- msleep(100);
- gpio_set_value(BABBAGE_USBH1_STP, 1);
- gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
- gpio_free_array(mx51_babbage_usbh1_gpios,
- ARRAY_SIZE(mx51_babbage_usbh1_gpios));
- return 0;
-}
-
-static inline void babbage_usbhub_reset(void)
-{
- int ret;
-
- /* Reset USB hub */
- ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
- GPIOF_OUT_INIT_LOW, "GPIO1_7");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
- return;
- }
-
- msleep(2);
- /* Deassert reset */
- gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
-}
-
-static inline void babbage_fec_reset(void)
-{
- int ret;
-
- /* reset FEC PHY */
- ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
- GPIOF_OUT_INIT_LOW, "fec-phy-reset");
- if (ret) {
- printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
- return;
- }
- msleep(1);
- gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
-}
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* Set the PHY clock to 19.2MHz */
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
- v |= MX51_USB_PLL_DIV_19_2_MHZ;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
- u32 v;
- void __iomem *usb_base;
- void __iomem *usbother_base;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base)
- return -ENOMEM;
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- /* The clock for the USBH1 ULPI port will come externally from the PHY. */
- v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
- __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
- iounmap(usb_base);
-
- mdelay(10);
-
- return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
- MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
- .init = initialize_otg_port,
- .portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
- .init = initialize_usbh1_port,
- .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init babbage_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", babbage_otg_mode);
-
-static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
- {
- .modalias = "mtd_dataflash",
- .max_speed_hz = 25000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- .platform_data = NULL,
- },
-};
-
-static int mx51_babbage_spi_cs[] = {
- BABBAGE_ECSPI1_CS0,
- BABBAGE_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
- .chipselect = mx51_babbage_spi_cs,
- .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
- .cd_type = ESDHC_CD_CONTROLLER,
- .wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
- .cd_gpio = BABBAGE_SD2_CD,
- .wp_gpio = BABBAGE_SD2_WP,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_GPIO,
-};
-
-void __init imx51_babbage_common_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
- ARRAY_SIZE(mx51babbage_pads));
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_babbage_init(void)
-{
- iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
- PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
-
- imx51_soc_init();
-
- imx51_babbage_common_init();
-
- imx51_add_imx_uart(0, &uart_pdata);
- imx51_add_imx_uart(1, NULL);
- imx51_add_imx_uart(2, &uart_pdata);
-
- babbage_fec_reset();
- imx51_add_fec(NULL);
-
- /* Set the PAD settings for the pwr key. */
- mxc_iomux_v3_setup_pad(power_key);
- imx_add_gpio_keys(&imx_button_data);
-
- imx51_add_imx_i2c(0, &babbage_i2c_data);
- imx51_add_imx_i2c(1, &babbage_i2c_data);
- imx51_add_hsi2c(&babbage_hsi2c_data);
-
- if (otg_mode_host)
- imx51_add_mxc_ehci_otg(&dr_utmi_config);
- else {
- initialize_otg_port(NULL);
- imx51_add_fsl_usb2_udc(&usb_pdata);
- }
-
- gpio_usbh1_active();
- imx51_add_mxc_ehci_hs(1, &usbh1_config);
- /* setback USBH1_STP to be function */
- mxc_iomux_v3_setup_pad(usbh1stp);
- babbage_usbhub_reset();
-
- imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
- imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
-
- spi_register_board_info(mx51_babbage_spi_board_info,
- ARRAY_SIZE(mx51_babbage_spi_board_info));
- imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
- imx51_add_imx2_wdt(0);
-}
-
-static void __init mx51_babbage_timer_init(void)
-{
- mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
- /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .atag_offset = 0x100,
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .handle_irq = imx51_handle_irq,
- .init_time = mx51_babbage_timer_init,
- .init_machine = mx51_babbage_init,
- .init_late = imx51_init_late,
- .restart = mxc_restart,
-MACHINE_END
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = mxt_td60_timer_init,
.init_machine = mxt_td60_board_init,
.restart = mxc_restart,
int ret;
ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "imx-mmc-detect", data);
+ IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
if (ret)
printk(KERN_ERR
"pca100: Failed to request irq for sd/mmc detection\n");
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_machine = pca100_init,
.init_time = pca100_timer_init,
.restart = mxc_restart,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = pcm037_timer_init,
.init_machine = pcm037_init,
.init_late = pcm037_init_late,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .handle_irq = imx27_handle_irq,
.init_time = pcm038_timer_init,
.init_machine = pcm038_init,
.restart = mxc_restart,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = pcm043_timer_init,
.init_machine = pcm043_init,
.restart = mxc_restart,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
- .handle_irq = imx31_handle_irq,
.init_time = qong_timer_init,
.init_machine = qong_init,
.restart = mxc_restart,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
- .handle_irq = imx1_handle_irq,
.init_time = scb9328_timer_init,
.init_machine = scb9328_init,
.restart = mxc_restart,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
- .handle_irq = imx35_handle_irq,
.init_time = vpr200_timer_init,
.init_machine = vpr200_board_init,
.restart = mxc_restart,
#define MXC_CPU_MX53 53
#define MXC_CPU_IMX6SL 0x60
#define MXC_CPU_IMX6DL 0x61
+#define MXC_CPU_IMX6SX 0x62
#define MXC_CPU_IMX6Q 0x63
#define IMX_CHIP_REVISION_1_0 0x10
return __mxc_cpu_type == MXC_CPU_IMX6DL;
}
+static inline bool cpu_is_imx6sx(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6SX;
+}
+
static inline bool cpu_is_imx6q(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6Q;
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/mach/time.h>
/* Make irqs happen */
setup_irq(irq, &mxc_timer_irq);
}
+
+void __init mxc_timer_init_dt(struct device_node *np)
+{
+ void __iomem *base;
+ int irq;
+
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+
+ mxc_timer_init(base, irq);
+}
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
-asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
{
u32 stat;
int i, irqofs, handled;
for (i = 0; i < 4; i++, irq_base += 32)
tzic_init_gc(i, irq_base);
+ set_handle_irq(tzic_handle_irq);
+
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ(FIQ_START);
{
kirkwood_disable_mbus_error_propagation();
- BUG_ON(mvebu_mbus_dt_init());
+ BUG_ON(mvebu_mbus_dt_init(false));
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_of_init();
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
+#include <asm/exception.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
0,
};
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE;
+
+asmlinkage void
+__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
+
void __init kirkwood_init_irq(void)
{
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(kirkwood_legacy_handle_irq);
+#endif
+
/*
* Initialize gpiolib for GPIOs 0-49.
*/
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select IRQ_DOMAIN
select PINCTRL
select PLAT_ORION
+ select SOC_BUS
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
select MIGHT_HAVE_PCI
select PCI_QUIRKS if PCI
- select OF_ADDRESS_PCI
if ARCH_MVEBU
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_375_CLK
- select CPU_V7
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_375
help
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_38X_CLK
- select CPU_V7
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
help
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select KIRKWOOD_CLK
- select OF_IRQ
select ORION_IRQCHIP
select ORION_TIMER
select PCI
select PCI_QUIRKS
select PINCTRL_KIRKWOOD
- select USE_OF
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
-config MACH_T5325
- bool "HP T5325 thin client"
- depends on MACH_KIRKWOOD
- help
- Say 'Y' here if you want your kernel to support the
- HP T5325 Thin client
-
endmenu
endif
-I$(srctree)/arch/arm/plat-orion/include
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
+CFLAGS_pmsu.o := -march=armv7-a
obj-y += system-controller.o mvebu-soc-id.o
-obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o
+
+ifeq ($(CONFIG_MACH_MVEBU_V7),y)
+obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+endif
+
obj-$(CONFIG_MACH_DOVE) += dove.o
-obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o
-obj-$(CONFIG_MACH_T5325) += board-t5325.o
#define ARMADA_XP_MAX_CPUS 4
-void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq);
-void armada_xp_mpic_smp_cpu_init(void);
void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif
+++ /dev/null
-/*
- * HP T5325 Board Setup
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <sound/alc5623.h>
-#include "board.h"
-
-static struct platform_device hp_t5325_audio_device = {
- .name = "t5325-audio",
- .id = -1,
-};
-
-static struct alc5623_platform_data alc5621_data = {
- .add_ctrl = 0x3700,
- .jack_det_ctrl = 0x4810,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("alc5621", 0x1a),
- .platform_data = &alc5621_data,
- },
-};
-
-void __init t5325_init(void)
-{
- i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
- platform_device_register(&hp_t5325_audio_device);
-}
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
+#include <asm/smp_scu.h>
#include "armada-370-xp.h"
#include "common.h"
#include "coherency.h"
#include "mvebu-soc-id.h"
+/*
+ * Enables the SCU when available. Obviously, this is only useful on
+ * Cortex-A based SOCs, not on PJ4B based ones.
+ */
+static void __init mvebu_scu_enable(void)
+{
+ void __iomem *scu_base;
+
+ struct device_node *np =
+ of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (np) {
+ scu_base = of_iomap(np, 0);
+ scu_enable(scu_base);
+ of_node_put(np);
+ }
+}
+
/*
* Early versions of Armada 375 SoC have a bug where the BootROM
* leaves an external data abort pending. The kernel is hit by this
{
of_clk_init(NULL);
clocksource_of_init();
+ mvebu_scu_enable();
coherency_init();
- BUG_ON(mvebu_mbus_dt_init());
-#ifdef CONFIG_CACHE_L2X0
+ BUG_ON(mvebu_mbus_dt_init(coherency_available()));
l2x0_of_init(0, ~0UL);
-#endif
if (of_machine_is_compatible("marvell,armada375"))
hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
* mechanism. We can exit only if we are sure that we can
* get the SoC revision and it is more recent than A0.
*/
- if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV)
+ if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
return;
for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
return;
}
+#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc
+
+static void __init thermal_quirk(void)
+{
+ struct device_node *np;
+ u32 dev, rev;
+
+ if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+ return;
+
+ for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
+ struct property *prop;
+ __be32 newval, *newprop, *oldprop;
+ int len;
+
+ /*
+ * The register offset is at a wrong location. This quirk
+ * creates a new reg property as a clone of the previous
+ * one and corrects the offset.
+ */
+ oldprop = (__be32 *)of_get_property(np, "reg", &len);
+ if (!oldprop)
+ continue;
+
+ /* Create a duplicate of the 'reg' property */
+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+ prop->length = len;
+ prop->name = kstrdup("reg", GFP_KERNEL);
+ prop->value = kzalloc(len, GFP_KERNEL);
+ memcpy(prop->value, oldprop, len);
+
+ /* Fixup the register offset of the second entry */
+ oldprop += 2;
+ newprop = (__be32 *)prop->value + 2;
+ newval = cpu_to_be32(be32_to_cpu(*oldprop) -
+ A375_Z1_THERMAL_FIXUP_OFFSET);
+ *newprop = newval;
+ of_update_property(np, prop);
+
+ /*
+ * The thermal controller needs some quirk too, so let's change
+ * the compatible string to reflect this.
+ */
+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+ prop->name = kstrdup("compatible", GFP_KERNEL);
+ prop->length = sizeof("marvell,armada375-z1-thermal");
+ prop->value = kstrdup("marvell,armada375-z1-thermal",
+ GFP_KERNEL);
+ of_update_property(np, prop);
+ }
+ return;
+}
+
static void __init mvebu_dt_init(void)
{
if (of_machine_is_compatible("plathome,openblocks-ax3-4"))
i2c_quirk();
+ if (of_machine_is_compatible("marvell,a375-db"))
+ thermal_quirk();
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
.init_time = mvebu_timer_and_clk_init,
+ .init_machine = mvebu_dt_init,
.restart = mvebu_restart,
.dt_compat = armada_375_dt_compat,
MACHINE_END
#ifndef __ARCH_MVEBU_BOARD_H
#define __ARCH_MVEBU_BOARD_H
-#ifdef CONFIG_MACH_T5325
-void t5325_init(void);
-#else
-static inline void t5325_init(void) {};
-#endif
-
#endif
* supplies basic routines for configuring and controlling hardware coherency
*/
+#define pr_fmt(fmt) "mvebu-coherency: " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mbus.h>
+#include <linux/clk.h>
#include <asm/smp_plat.h>
#include <asm/cacheflush.h>
#include "armada-370-xp.h"
#include "coherency.h"
+#include "mvebu-soc-id.h"
unsigned long coherency_phys_base;
-static void __iomem *coherency_base;
+void __iomem *coherency_base;
static void __iomem *coherency_cpu_base;
/* Coherency fabric registers */
#define IO_SYNC_BARRIER_CTL_OFFSET 0x0
+enum {
+ COHERENCY_FABRIC_TYPE_NONE,
+ COHERENCY_FABRIC_TYPE_ARMADA_370_XP,
+ COHERENCY_FABRIC_TYPE_ARMADA_375,
+ COHERENCY_FABRIC_TYPE_ARMADA_380,
+};
+
static struct of_device_id of_coherency_table[] = {
- {.compatible = "marvell,coherency-fabric"},
+ {.compatible = "marvell,coherency-fabric",
+ .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP },
+ {.compatible = "marvell,armada-375-coherency-fabric",
+ .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 },
+ {.compatible = "marvell,armada-380-coherency-fabric",
+ .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 },
{ /* end of list */ },
};
-/* Function defined in coherency_ll.S */
-int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id);
+/* Functions defined in coherency_ll.S */
+int ll_enable_coherency(void);
+void ll_add_cpu_to_smp_group(void);
-int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id)
+int set_cpu_coherent(void)
{
if (!coherency_base) {
- pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id);
+ pr_warn("Can't make current CPU cache coherent.\n");
pr_warn("Coherency fabric is not initialized\n");
return 1;
}
- return ll_set_cpu_coherent(coherency_base, hw_cpu_id);
+ ll_add_cpu_to_smp_group();
+ return ll_enable_coherency();
+}
+
+/*
+ * The below code implements the I/O coherency workaround on Armada
+ * 375. This workaround consists in using the two channels of the
+ * first XOR engine to trigger a XOR transaction that serves as the
+ * I/O coherency barrier.
+ */
+
+static void __iomem *xor_base, *xor_high_base;
+static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS];
+static void *coherency_wa_buf[CONFIG_NR_CPUS];
+static bool coherency_wa_enabled;
+
+#define XOR_CONFIG(chan) (0x10 + (chan * 4))
+#define XOR_ACTIVATION(chan) (0x20 + (chan * 4))
+#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2))
+#define WINDOW_BASE(w) (0x250 + ((w) << 2))
+#define WINDOW_SIZE(w) (0x270 + ((w) << 2))
+#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2))
+#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2))
+#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4))
+#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4))
+#define XOR_INIT_VALUE_LOW 0x2E0
+#define XOR_INIT_VALUE_HIGH 0x2E4
+
+static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void)
+{
+ int idx = smp_processor_id();
+
+ /* Write '1' to the first word of the buffer */
+ writel(0x1, coherency_wa_buf[idx]);
+
+ /* Wait until the engine is idle */
+ while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3)
+ ;
+
+ dmb();
+
+ /* Trigger channel */
+ writel(0x1, xor_base + XOR_ACTIVATION(idx));
+
+ /* Poll the data until it is cleared by the XOR transaction */
+ while (readl(coherency_wa_buf[idx]))
+ ;
+}
+
+static void __init armada_375_coherency_init_wa(void)
+{
+ const struct mbus_dram_target_info *dram;
+ struct device_node *xor_node;
+ struct property *xor_status;
+ struct clk *xor_clk;
+ u32 win_enable = 0;
+ int i;
+
+ pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n");
+
+ /*
+ * Since the workaround uses one XOR engine, we grab a
+ * reference to its Device Tree node first.
+ */
+ xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor");
+ BUG_ON(!xor_node);
+
+ /*
+ * Then we mark it as disabled so that the real XOR driver
+ * will not use it.
+ */
+ xor_status = kzalloc(sizeof(struct property), GFP_KERNEL);
+ BUG_ON(!xor_status);
+
+ xor_status->value = kstrdup("disabled", GFP_KERNEL);
+ BUG_ON(!xor_status->value);
+
+ xor_status->length = 8;
+ xor_status->name = kstrdup("status", GFP_KERNEL);
+ BUG_ON(!xor_status->name);
+
+ of_update_property(xor_node, xor_status);
+
+ /*
+ * And we remap the registers, get the clock, and do the
+ * initial configuration of the XOR engine.
+ */
+ xor_base = of_iomap(xor_node, 0);
+ xor_high_base = of_iomap(xor_node, 1);
+
+ xor_clk = of_clk_get_by_name(xor_node, NULL);
+ BUG_ON(!xor_clk);
+
+ clk_prepare_enable(xor_clk);
+
+ dram = mv_mbus_dram_info();
+
+ for (i = 0; i < 8; i++) {
+ writel(0, xor_base + WINDOW_BASE(i));
+ writel(0, xor_base + WINDOW_SIZE(i));
+ if (i < 4)
+ writel(0, xor_base + WINDOW_REMAP_HIGH(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+ writel((cs->base & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i));
+ writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i));
+
+ win_enable |= (1 << i);
+ win_enable |= 3 << (16 + (2 * i));
+ }
+
+ writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0));
+ writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1));
+ writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0));
+ writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1));
+
+ for (i = 0; i < CONFIG_NR_CPUS; i++) {
+ coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ BUG_ON(!coherency_wa_buf[i]);
+
+ /*
+ * We can't use the DMA mapping API, since we don't
+ * have a valid 'struct device' pointer
+ */
+ coherency_wa_buf_phys[i] =
+ virt_to_phys(coherency_wa_buf[i]);
+ BUG_ON(!coherency_wa_buf_phys[i]);
+
+ /*
+ * Configure the XOR engine for memset operation, with
+ * a 128 bytes block size
+ */
+ writel(0x444, xor_base + XOR_CONFIG(i));
+ writel(128, xor_base + XOR_BLOCK_SIZE(i));
+ writel(coherency_wa_buf_phys[i],
+ xor_base + XOR_DEST_POINTER(i));
+ }
+
+ writel(0x0, xor_base + XOR_INIT_VALUE_LOW);
+ writel(0x0, xor_base + XOR_INIT_VALUE_HIGH);
+
+ coherency_wa_enabled = true;
}
static inline void mvebu_hwcc_sync_io_barrier(void)
{
+ if (coherency_wa_enabled) {
+ mvebu_hwcc_armada375_sync_io_barrier_wa();
+ return;
+ }
+
writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
}
.notifier_call = mvebu_hwcc_platform_notifier,
};
-int __init coherency_init(void)
+static void __init armada_370_coherency_init(struct device_node *np)
+{
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ coherency_phys_base = res.start;
+ /*
+ * Ensure secondary CPUs will see the updated value,
+ * which they read before they join the coherency
+ * fabric, and therefore before they are coherent with
+ * the boot CPU cache.
+ */
+ sync_cache_w(&coherency_phys_base);
+ coherency_base = of_iomap(np, 0);
+ coherency_cpu_base = of_iomap(np, 1);
+ set_cpu_coherent();
+}
+
+static void __init armada_375_380_coherency_init(struct device_node *np)
+{
+ coherency_cpu_base = of_iomap(np, 0);
+}
+
+static int coherency_type(void)
{
struct device_node *np;
+ const struct of_device_id *match;
- np = of_find_matching_node(NULL, of_coherency_table);
+ np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
if (np) {
- struct resource res;
- pr_info("Initializing Coherency fabric\n");
- of_address_to_resource(np, 0, &res);
- coherency_phys_base = res.start;
- /*
- * Ensure secondary CPUs will see the updated value,
- * which they read before they join the coherency
- * fabric, and therefore before they are coherent with
- * the boot CPU cache.
- */
- sync_cache_w(&coherency_phys_base);
- coherency_base = of_iomap(np, 0);
- coherency_cpu_base = of_iomap(np, 1);
- set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
- of_node_put(np);
+ int type = (int) match->data;
+
+ /* Armada 370/XP coherency works in both UP and SMP */
+ if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
+ return type;
+
+ /* Armada 375 coherency works only on SMP */
+ else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp())
+ return type;
+
+ /* Armada 380 coherency works only on SMP */
+ else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp())
+ return type;
}
- return 0;
+ return COHERENCY_FABRIC_TYPE_NONE;
}
-static int __init coherency_late_init(void)
+int coherency_available(void)
+{
+ return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
+}
+
+int __init coherency_init(void)
{
+ int type = coherency_type();
struct device_node *np;
np = of_find_matching_node(NULL, of_coherency_table);
- if (np) {
- bus_register_notifier(&platform_bus_type,
- &mvebu_hwcc_platform_nb);
- of_node_put(np);
+
+ if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
+ armada_370_coherency_init(np);
+ else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 ||
+ type == COHERENCY_FABRIC_TYPE_ARMADA_380)
+ armada_375_380_coherency_init(np);
+
+ return 0;
+}
+
+static int __init coherency_late_init(void)
+{
+ int type = coherency_type();
+
+ if (type == COHERENCY_FABRIC_TYPE_NONE)
+ return 0;
+
+ if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) {
+ u32 dev, rev;
+
+ if (mvebu_get_soc_id(&dev, &rev) == 0 &&
+ rev == ARMADA_375_Z1_REV)
+ armada_375_coherency_init_wa();
}
+
+ bus_register_notifier(&platform_bus_type,
+ &mvebu_hwcc_platform_nb);
+
return 0;
}
#define __MACH_370_XP_COHERENCY_H
extern unsigned long coherency_phys_base;
+int set_cpu_coherent(void);
-int set_cpu_coherent(unsigned int cpu_id, int smp_group_id);
int coherency_init(void);
+int coherency_available(void);
#endif /* __MACH_370_XP_COHERENCY_H */
#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
#include <asm/assembler.h>
+#include <asm/cp15.h>
.text
-/*
- * r0: Coherency fabric base register address
- * r1: HW CPU id
- */
-ENTRY(ll_set_cpu_coherent)
- /* Create bit by cpu index */
- mov r3, #(1 << 24)
- lsl r1, r3, r1
-ARM_BE8(rev r1, r1)
+/* Returns with the coherency address in r1 (r0 is untouched)*/
+ENTRY(ll_get_coherency_base)
+ mrc p15, 0, r1, c1, c0, 0
+ tst r1, #CR_M @ Check MMU bit enabled
+ bne 1f
- /* Add CPU to SMP group - Atomic */
- add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
+ /* use physical address of the coherency register */
+ adr r1, 3f
+ ldr r3, [r1]
+ ldr r1, [r1, r3]
+ b 2f
1:
- ldrex r2, [r3]
- orr r2, r2, r1
- strex r0, r2, [r3]
- cmp r0, #0
- bne 1b
-
- /* Enable coherency on CPU - Atomic */
- add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET
+ /* use virtual address of the coherency register */
+ ldr r1, =coherency_base
+ ldr r1, [r1]
+2:
+ mov pc, lr
+ENDPROC(ll_get_coherency_base)
+
+/* Returns with the CPU ID in r3 (r0 is untouched)*/
+ENTRY(ll_get_cpuid)
+ mrc 15, 0, r3, cr0, cr0, 5
+ and r3, r3, #15
+ mov r2, #(1 << 24)
+ lsl r3, r2, r3
+ARM_BE8(rev r1, r1)
+ mov pc, lr
+ENDPROC(ll_get_cpuid)
+
+/* ll_add_cpu_to_smp_group, ll_enable_coherency and
+ * ll_disable_coherency use strex/ldrex whereas MMU can be off. The
+ * Armada XP SoC has an exclusive monitor that can track transactions
+ * to Device and/or SO and as such also when MMU is disabled the
+ * exclusive transactions will be functional
+ */
+
+ENTRY(ll_add_cpu_to_smp_group)
+ /*
+ * r0 being untouched in ll_get_coherency_base and
+ * ll_get_cpuid, we can use it to save lr modifing it with the
+ * following bl
+ */
+ mov r0, lr
+ bl ll_get_coherency_base
+ bl ll_get_cpuid
+ mov lr, r0
+ add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
1:
- ldrex r2, [r3]
- orr r2, r2, r1
- strex r0, r2, [r3]
- cmp r0, #0
- bne 1b
+ ldrex r2, [r0]
+ orr r2, r2, r3
+ strex r1, r2, [r0]
+ cmp r1, #0
+ bne 1b
+ mov pc, lr
+ENDPROC(ll_add_cpu_to_smp_group)
+ENTRY(ll_enable_coherency)
+ /*
+ * r0 being untouched in ll_get_coherency_base and
+ * ll_get_cpuid, we can use it to save lr modifing it with the
+ * following bl
+ */
+ mov r0, lr
+ bl ll_get_coherency_base
+ bl ll_get_cpuid
+ mov lr, r0
+ add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+ ldrex r2, [r0]
+ orr r2, r2, r3
+ strex r1, r2, [r0]
+ cmp r1, #0
+ bne 1b
dsb
-
mov r0, #0
mov pc, lr
-ENDPROC(ll_set_cpu_coherent)
+ENDPROC(ll_enable_coherency)
+
+ENTRY(ll_disable_coherency)
+ /*
+ * r0 being untouched in ll_get_coherency_base and
+ * ll_get_cpuid, we can use it to save lr modifing it with the
+ * following bl
+ */
+ mov r0, lr
+ bl ll_get_coherency_base
+ bl ll_get_cpuid
+ mov lr, r0
+ add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+ ldrex r2, [r0]
+ bic r2, r2, r3
+ strex r1, r2, [r0]
+ cmp r1, #0
+ bne 1b
+ dsb
+ mov pc, lr
+ENDPROC(ll_disable_coherency)
+
+ .align 2
+3:
+ .long coherency_phys_base - .
#include <linux/reboot.h>
void mvebu_restart(enum reboot_mode mode, const char *cmd);
+int mvebu_cpu_reset_deassert(int cpu);
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr);
void armada_xp_cpu_die(unsigned int cpu);
--- /dev/null
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-cpureset: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/resource.h>
+#include "armada-370-xp.h"
+
+static void __iomem *cpu_reset_base;
+static size_t cpu_reset_size;
+
+#define CPU_RESET_OFFSET(cpu) (cpu * 0x8)
+#define CPU_RESET_ASSERT BIT(0)
+
+int mvebu_cpu_reset_deassert(int cpu)
+{
+ u32 reg;
+
+ if (!cpu_reset_base)
+ return -ENODEV;
+
+ if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size)
+ return -EINVAL;
+
+ reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu));
+ reg &= ~CPU_RESET_ASSERT;
+ writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu));
+
+ return 0;
+}
+
+static int mvebu_cpu_reset_map(struct device_node *np, int res_idx)
+{
+ struct resource res;
+
+ if (of_address_to_resource(np, res_idx, &res)) {
+ pr_err("unable to get resource\n");
+ return -ENOENT;
+ }
+
+ if (!request_mem_region(res.start, resource_size(&res),
+ np->full_name)) {
+ pr_err("unable to request region\n");
+ return -EBUSY;
+ }
+
+ cpu_reset_base = ioremap(res.start, resource_size(&res));
+ if (!cpu_reset_base) {
+ pr_err("unable to map registers\n");
+ release_mem_region(res.start, resource_size(&res));
+ return -ENOMEM;
+ }
+
+ cpu_reset_size = resource_size(&res);
+
+ return 0;
+}
+
+int __init mvebu_cpu_reset_init(void)
+{
+ struct device_node *np;
+ int res_idx;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-370-cpu-reset");
+ if (np) {
+ res_idx = 0;
+ } else {
+ /*
+ * This code is kept for backward compatibility with
+ * old Device Trees.
+ */
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-370-xp-pmsu");
+ if (np) {
+ pr_warn(FW_WARN "deprecated pmsu binding\n");
+ res_idx = 1;
+ }
+ }
+
+ /* No reset node found */
+ if (!np)
+ return -ENODEV;
+
+ ret = mvebu_cpu_reset_map(np, res_idx);
+ of_node_put(np);
+
+ return ret;
+}
+
+early_initcall(mvebu_cpu_reset_init);
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init(0);
#endif
- BUG_ON(mvebu_mbus_dt_init());
+ BUG_ON(mvebu_mbus_dt_init(false));
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
--- /dev/null
+/*
+ * SMP support: Entry point for secondary CPUs of Marvell EBU
+ * Cortex-A9 based SOCs (Armada 375 and Armada 38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __CPUINIT
+#define CPU_RESUME_ADDR_REG 0xf10182d4
+
+.global armada_375_smp_cpu1_enable_code_start
+.global armada_375_smp_cpu1_enable_code_end
+
+armada_375_smp_cpu1_enable_code_start:
+ ldr r0, [pc, #4]
+ ldr r1, [r0]
+ mov pc, r1
+ .word CPU_RESUME_ADDR_REG
+armada_375_smp_cpu1_enable_code_end:
+
+ENTRY(mvebu_cortex_a9_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(mvebu_cortex_a9_secondary_startup)
ENTRY(armada_xp_secondary_startup)
ARM_BE8(setend be ) @ go BE8 if entered LE
- /* Get coherency fabric base physical address */
- adr r0, 1f
- ldr r1, [r0]
- ldr r0, [r0, r1]
+ bl ll_add_cpu_to_smp_group
- /* Read CPU id */
- mrc p15, 0, r1, c0, c0, 5
- and r1, r1, #0xF
+ bl ll_enable_coherency
- /* Add CPU to coherency fabric */
- bl ll_set_cpu_coherent
b secondary_startup
ENDPROC(armada_xp_secondary_startup)
-
- .align 2
-1:
- .long coherency_phys_base - .
{
kirkwood_disable_mbus_error_propagation();
- BUG_ON(mvebu_mbus_dt_init());
+ BUG_ON(mvebu_mbus_dt_init(false));
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_of_init();
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
- if (of_machine_is_compatible("hp,t5325"))
- t5325_init();
-
of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include "mvebu-soc-id.h"
#define PCIE_DEV_ID_OFF 0x0
return ret;
}
-core_initcall(mvebu_soc_id_init);
+early_initcall(mvebu_soc_id_init);
+static int __init mvebu_soc_device(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+
+ /* Also protects against running on non-mvebu systems */
+ if (!is_id_valid)
+ return 0;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell");
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->family);
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr);
+ }
+
+ return 0;
+}
+postcore_initcall(mvebu_soc_device);
#define MV78XX0_A0_REV 0x1
#define MV78XX0_B0_REV 0x2
+/* Armada 375 */
+#define ARMADA_375_Z1_REV 0x0
+#define ARMADA_375_A0_REV 0x3
+
#ifdef CONFIG_ARCH_MVEBU
int mvebu_get_soc_id(u32 *dev, u32 *rev);
#else
--- /dev/null
+/*
+ * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9
+ * based SOCs (Armada 375/38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/mbus.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "mvebu-soc-id.h"
+#include "pmsu.h"
+
+#define CRYPT0_ENG_ID 41
+#define CRYPT0_ENG_ATTR 0x1
+#define SRAM_PHYS_BASE 0xFFFF0000
+
+#define BOOTROM_BASE 0xFFF00000
+#define BOOTROM_SIZE 0x100000
+
+extern unsigned char armada_375_smp_cpu1_enable_code_end;
+extern unsigned char armada_375_smp_cpu1_enable_code_start;
+
+void armada_375_smp_cpu1_enable_wa(void)
+{
+ void __iomem *sram_virt_base;
+
+ mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
+ mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR,
+ SRAM_PHYS_BASE, SZ_64K);
+ sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
+
+ memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start,
+ &armada_375_smp_cpu1_enable_code_end
+ - &armada_375_smp_cpu1_enable_code_start);
+}
+
+extern void mvebu_cortex_a9_secondary_startup(void);
+
+static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ int ret, hw_cpu;
+
+ pr_info("Booting CPU %d\n", cpu);
+
+ /*
+ * Write the address of secondary startup into the system-wide
+ * flags register. The boot monitor waits until it receives a
+ * soft interrupt, and then the secondary CPU branches to this
+ * address.
+ */
+ hw_cpu = cpu_logical_map(cpu);
+
+ if (of_machine_is_compatible("marvell,armada375")) {
+ u32 dev, rev;
+
+ if (mvebu_get_soc_id(&dev, &rev) == 0 &&
+ rev == ARMADA_375_Z1_REV)
+ armada_375_smp_cpu1_enable_wa();
+
+ mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup);
+ }
+ else {
+ mvebu_pmsu_set_cpu_boot_addr(hw_cpu,
+ mvebu_cortex_a9_secondary_startup);
+ }
+
+ smp_wmb();
+ ret = mvebu_cpu_reset_deassert(hw_cpu);
+ if (ret) {
+ pr_err("Could not start the secondary CPU: %d\n", ret);
+ return ret;
+ }
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ return 0;
+}
+
+static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
+ .smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = armada_xp_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
+ &mvebu_cortex_a9_smp_ops);
+CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
+ &mvebu_cortex_a9_smp_ops);
}
}
-static void armada_xp_secondary_init(unsigned int cpu)
-{
- armada_xp_mpic_smp_cpu_init();
-}
-
static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
+ int ret, hw_cpu;
+
pr_info("Booting CPU %d\n", cpu);
- armada_xp_boot_cpu(cpu, armada_xp_secondary_startup);
+ hw_cpu = cpu_logical_map(cpu);
+ mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
+ ret = mvebu_cpu_reset_deassert(hw_cpu);
+ if (ret) {
+ pr_warn("unable to boot CPU: %d\n", ret);
+ return ret;
+ }
return 0;
}
if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS)
panic("Invalid number of CPUs in DT\n");
-
- set_smp_cross_call(armada_mpic_send_doorbell);
}
static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
set_secondary_cpus_clock();
flush_cache_all();
- set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+ set_cpu_coherent();
/*
* In order to boot the secondary CPUs we need to ensure
struct smp_operations armada_xp_smp_ops __initdata = {
.smp_init_cpus = armada_xp_smp_init_cpus,
.smp_prepare_cpus = armada_xp_smp_prepare_cpus,
- .smp_secondary_init = armada_xp_secondary_init,
.smp_boot_secondary = armada_xp_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = armada_xp_cpu_die,
#endif
};
+
+CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
+ &armada_xp_smp_ops);
* other SOC units
*/
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <linux/smp.h>
+#include <linux/resource.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/smp_plat.h>
-#include "pmsu.h"
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+#include "common.h"
static void __iomem *pmsu_mp_base;
-static void __iomem *pmsu_reset_base;
-#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x24)
-#define PMSU_RESET_CTL_OFFSET(cpu) (cpu * 0x8)
+#define PMSU_BASE_OFFSET 0x100
+#define PMSU_REG_SIZE 0x1000
+
+/* PMSU MP registers */
+#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104)
+#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18)
+#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16)
+#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20)
+
+#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108)
+
+#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0)
+
+#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c)
+#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16)
+#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17)
+#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20)
+#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21)
+#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22)
+#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24)
+#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25)
+
+#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
+
+/* PMSU fabric registers */
+#define L2C_NFABRIC_PM_CTL 0x4
+#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20)
+
+extern void ll_disable_coherency(void);
+extern void ll_enable_coherency(void);
+
+static struct platform_device armada_xp_cpuidle_device = {
+ .name = "cpuidle-armada-370-xp",
+};
static struct of_device_id of_pmsu_table[] = {
- {.compatible = "marvell,armada-370-xp-pmsu"},
+ { .compatible = "marvell,armada-370-pmsu", },
+ { .compatible = "marvell,armada-370-xp-pmsu", },
+ { .compatible = "marvell,armada-380-pmsu", },
{ /* end of list */ },
};
-#ifdef CONFIG_SMP
-int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr)
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
{
- int reg, hw_cpu;
+ writel(virt_to_phys(boot_addr), pmsu_mp_base +
+ PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+}
+
+static int __init armada_370_xp_pmsu_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+ int ret = 0;
+
+ np = of_find_matching_node(NULL, of_pmsu_table);
+ if (!np)
+ return 0;
+
+ pr_info("Initializing Power Management Service Unit\n");
- if (!pmsu_mp_base || !pmsu_reset_base) {
- pr_warn("Can't boot CPU. PMSU is uninitialized\n");
- return 1;
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("unable to get resource\n");
+ ret = -ENOENT;
+ goto out;
}
- hw_cpu = cpu_logical_map(cpu_id);
+ if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) {
+ pr_warn(FW_WARN "deprecated pmsu binding\n");
+ res.start = res.start - PMSU_BASE_OFFSET;
+ res.end = res.start + PMSU_REG_SIZE - 1;
+ }
- writel(virt_to_phys(boot_addr), pmsu_mp_base +
- PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+ if (!request_mem_region(res.start, resource_size(&res),
+ np->full_name)) {
+ pr_err("unable to request region\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ pmsu_mp_base = ioremap(res.start, resource_size(&res));
+ if (!pmsu_mp_base) {
+ pr_err("unable to map registers\n");
+ release_mem_region(res.start, resource_size(&res));
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ out:
+ of_node_put(np);
+ return ret;
+}
+
+static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void)
+{
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
+
+ /* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */
+ reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+ reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
+ writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+}
+
+static void armada_370_xp_cpu_resume(void)
+{
+ asm volatile("bl ll_add_cpu_to_smp_group\n\t"
+ "bl ll_enable_coherency\n\t"
+ "b cpu_resume\n\t");
+}
+
+/* No locking is needed because we only access per-CPU registers */
+void armada_370_xp_pmsu_idle_prepare(bool deepidle)
+{
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
- /* Release CPU from reset by clearing reset bit*/
- reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
- reg &= (~0x1);
- writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
+ /*
+ * Adjust the PMSU configuration to wait for WFI signal, enable
+ * IRQ and FIQ as wakeup events, set wait for snoop queue empty
+ * indication and mask IRQ and FIQ from CPU
+ */
+ reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+ reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
+ PMSU_STATUS_AND_MASK_IRQ_WAKEUP |
+ PMSU_STATUS_AND_MASK_FIQ_WAKEUP |
+ PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
+ PMSU_STATUS_AND_MASK_IRQ_MASK |
+ PMSU_STATUS_AND_MASK_FIQ_MASK;
+ writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+
+ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+ /* ask HW to power down the L2 Cache if needed */
+ if (deepidle)
+ reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+
+ /* request power down */
+ reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
+ writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+ /* Disable snoop disable by HW - SW is taking care of it */
+ reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+ reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
+ writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+}
+
+static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+ armada_370_xp_pmsu_idle_prepare(deepidle);
+
+ v7_exit_coherency_flush(all);
+
+ ll_disable_coherency();
+
+ dsb();
+
+ wfi();
+
+ /* If we are here, wfi failed. As processors run out of
+ * coherency for some time, tlbs might be stale, so flush them
+ */
+ local_flush_tlb_all();
+
+ ll_enable_coherency();
+
+ /* Test the CR_C bit and set it if it was cleared */
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0 \n\t"
+ "tst %0, #(1 << 2) \n\t"
+ "orreq %0, %0, #(1 << 2) \n\t"
+ "mcreq p15, 0, %0, c1, c0, 0 \n\t"
+ "isb "
+ : : "r" (0));
+
+ pr_warn("Failed to suspend the system\n");
return 0;
}
-#endif
-static int __init armada_370_xp_pmsu_init(void)
+static int armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+ return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend);
+}
+
+/* No locking is needed because we only access per-CPU registers */
+static noinline void armada_370_xp_pmsu_idle_restore(void)
+{
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ u32 reg;
+
+ if (pmsu_mp_base == NULL)
+ return;
+
+ /* cancel ask HW to power down the L2 Cache if possible */
+ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+ reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+ writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+ /* cancel Enable wakeup events and mask interrupts */
+ reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+ reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
+ reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
+ reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
+ reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
+ writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+}
+
+static int armada_370_xp_cpu_pm_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_PM_ENTER) {
+ unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+ mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume);
+ } else if (action == CPU_PM_EXIT) {
+ armada_370_xp_pmsu_idle_restore();
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block armada_370_xp_cpu_pm_notifier = {
+ .notifier_call = armada_370_xp_cpu_pm_notify,
+};
+
+int __init armada_370_xp_cpu_pm_init(void)
{
struct device_node *np;
+ /*
+ * Check that all the requirements are available to enable
+ * cpuidle. So far, it is only supported on Armada XP, cpuidle
+ * needs the coherency fabric and the PMSU enabled
+ */
+
+ if (!of_machine_is_compatible("marvell,armadaxp"))
+ return 0;
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
+ if (!np)
+ return 0;
+ of_node_put(np);
+
np = of_find_matching_node(NULL, of_pmsu_table);
- if (np) {
- pr_info("Initializing Power Management Service Unit\n");
- pmsu_mp_base = of_iomap(np, 0);
- pmsu_reset_base = of_iomap(np, 1);
- of_node_put(np);
- }
+ if (!np)
+ return 0;
+ of_node_put(np);
+
+ armada_370_xp_pmsu_enable_l2_powerdown_onidle();
+ armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
+ platform_device_register(&armada_xp_cpuidle_device);
+ cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier);
return 0;
}
+arch_initcall(armada_370_xp_cpu_pm_init);
early_initcall(armada_370_xp_pmsu_init);
u32 rstoutn_mask_reset_out_en;
u32 system_soft_reset;
+
+ u32 resume_boot_addr;
};
static struct mvebu_system_controller *mvebu_sc;
.system_soft_reset_offset = 0x58,
.rstoutn_mask_reset_out_en = 0x1,
.system_soft_reset = 0x1,
+ .resume_boot_addr = 0xd4,
};
static const struct mvebu_system_controller orion_system_controller = {
;
}
+#ifdef CONFIG_SMP
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr)
+{
+ BUG_ON(system_controller_base == NULL);
+ BUG_ON(mvebu_sc->resume_boot_addr == 0);
+ writel(virt_to_phys(boot_addr), system_controller_base +
+ mvebu_sc->resume_boot_addr);
+}
+#endif
+
static int __init mvebu_system_controller_init(void)
{
const struct of_device_id *match;
return 0;
}
-arch_initcall(mvebu_system_controller_init);
+early_initcall(mvebu_system_controller_init);
static int __init rx51_video_init(void)
{
- if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
+ if (!machine_is_nokia_rx51())
return 0;
if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
return 1;
- } else if (soc_is_am33xx() || cpu_is_omap44xx()) {
+ } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
return __clk_get_rate(dd->clk_bypass);
- } else if (soc_is_am33xx() || cpu_is_omap44xx()) {
+ } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
int r;
spin_lock(&gpmc_mem_lock);
- r = release_resource(&gpmc_cs_mem[cs]);
+ r = release_resource(res);
res->start = 0;
res->end = 0;
spin_unlock(&gpmc_mem_lock);
pr_err("%s: requested chip-select is disabled\n", __func__);
return -ENODEV;
}
+
+ /*
+ * Make sure we ignore any device offsets from the GPMC partition
+ * allocated for the chip select and that the new base confirms
+ * to the GPMC 16MB minimum granularity.
+ */
+ base &= ~(SZ_16M - 1);
+
gpmc_cs_get_memconf(cs, &old_base, &size);
if (base == old_base)
return 0;
void gpmc_cs_free(int cs)
{
+ struct resource *res = &gpmc_cs_mem[cs];
+
spin_lock(&gpmc_mem_lock);
if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
return;
}
gpmc_cs_disable_mem(cs);
- release_resource(&gpmc_cs_mem[cs]);
+ if (res->flags)
+ release_resource(res);
gpmc_cs_set_reserved(cs, 0);
spin_unlock(&gpmc_mem_lock);
}
return -EINVAL;
}
- if (np)
+ if (np) {
if (of_find_property(np, "ti,no-reset-on-init", NULL))
oh->flags |= HWMOD_INIT_NO_RESET;
if (of_find_property(np, "ti,no-idle-on-init", NULL))
oh->flags |= HWMOD_INIT_NO_IDLE;
+ }
oh->_state = _HWMOD_STATE_INITIALIZED;
static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
.name = "usb_host_hs",
.class = &omap3xxx_usb_host_hs_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
+ .clkdm_name = "usbhost_clkdm",
.mpu_irqs = omap3xxx_usb_host_hs_irqs,
.main_clk = "usbhost_48m_fck",
.prcm = {
static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
.name = "usb_tll_hs",
.class = &omap3xxx_usb_tll_hs_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
+ .clkdm_name = "core_l4_clkdm",
.mpu_irqs = omap3xxx_usb_tll_hs_irqs,
.main_clk = "usbtll_fck",
.prcm = {
omap3_sram_restore_context();
omap2_sms_restore_context();
}
- if (core_next_state == PWRDM_POWER_OFF)
- omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
- OMAP3430_GR_MOD,
- OMAP3_PRM_VOLTCTRL_OFFSET);
}
omap3_intc_resume_idle();
config ARCH_ORION5X_DT
bool "Marvell Orion5x Flattened Device Tree"
select USE_OF
+ select ORION_CLK
+ select ORION_IRQCHIP
+ select ORION_TIMER
+ select PINCTRL
+ select PINCTRL_ORION
help
Say 'Y' here if you want your kernel to support the
Marvell Orion5x using flattened device tree.
Say 'Y' here if you want your kernel to support the
Marvell Orion-NAS (88F5182) RD2
+config MACH_RD88F5182_DT
+ bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the Marvell
+ Orion-NAS (88F5182) RD2, Flattened Device Tree.
+
config MACH_KUROBOX_PRO
bool "KuroBox Pro"
select I2C_BOARDINFO
Say 'Y' here if you want your kernel to support the
HP Media Vault mv2120 or mv5100.
-config MACH_EDMINI_V2_DT
- bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)"
- select I2C_BOARDINFO
+config MACH_D2NET_DT
+ bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"
select ARCH_ORION5X_DT
- help
- Say 'Y' here if you want your kernel to support the
- LaCie Ethernet Disk mini V2 (Flattened Device Tree).
-
-config MACH_D2NET
- bool "LaCie d2 Network"
- select I2C_BOARDINFO
help
Say 'Y' here if you want your kernel to support the
LaCie d2 Network NAS.
-config MACH_BIGDISK
- bool "LaCie Big Disk Network"
- select I2C_BOARDINFO
- help
- Say 'Y' here if you want your kernel to support the
- LaCie Big Disk Network NAS.
-
config MACH_NET2BIG
bool "LaCie 2Big Network"
select I2C_BOARDINFO
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network NAS.
-config MACH_MSS2
- bool "Maxtor Shared Storage II"
+config MACH_MSS2_DT
+ bool "Maxtor Shared Storage II (Flattened Device Tree)"
+ select ARCH_ORION5X_DT
help
Say 'Y' here if you want your kernel to support the
Maxtor Shared Storage II platform.
obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o
obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o
obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o
-obj-$(CONFIG_MACH_D2NET) += d2net-setup.o
-obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o
obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o
-obj-$(CONFIG_MACH_MSS2) += mss2-setup.o
obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o
obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o
-obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o
+obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o
+obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/board-d2net.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off | blink_ctrl | SATA active | LED state
+ * | | |
+ * 1 | x | x | off
+ * 0 | 0 | 0 | off
+ * 0 | 1 | 0 | blink (rate 300ms)
+ * 0 | x | 1 | on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ * Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED 6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
+#define D2NET_GPIO_BLUE_LED_OFF 23
+
+static struct gpio_led d2net_leds[] = {
+ {
+ .name = "d2net:blue:sata",
+ .default_trigger = "default-on",
+ .gpio = D2NET_GPIO_BLUE_LED_OFF,
+ .active_low = 1,
+ },
+ {
+ .name = "d2net:red:fail",
+ .gpio = D2NET_GPIO_RED_LED,
+ },
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+ .num_leds = ARRAY_SIZE(d2net_leds),
+ .leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &d2net_led_data,
+ },
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+ int err;
+
+ /* Configure register blink_ctrl to allow SATA activity LED blinking. */
+ err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+ if (err == 0) {
+ err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+ if (err)
+ gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+ }
+ if (err)
+ pr_err("d2net: failed to configure blue LED blink GPIO\n");
+
+ platform_device_register(&d2net_gpio_leds);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+void __init d2net_init(void)
+{
+ d2net_gpio_leds_init();
+
+ pr_notice("d2net: Flash write are not yet supported.\n");
+}
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/cpu.h>
+#include <linux/mbus.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
+#include <plat/time.h>
#include "common.h"
static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
orion5x_id(&dev, &rev, &dev_name);
printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+ BUG_ON(mvebu_mbus_dt_init());
+
/*
* Setup Orion address map
*/
orion5x_setup_wins();
- /* Setup root of clk tree */
- clk_init();
-
/*
* Don't issue "Wait for Interrupt" instruction if we are
* running on D0 5281 silicon.
cpu_idle_poll_ctrl(true);
}
- if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2"))
- edmini_v2_init();
+ if (of_machine_is_compatible("maxtor,shared-storage-2"))
+ mss2_init();
of_platform_populate(NULL, of_default_bus_match_table,
orion5x_auxdata_lookup, NULL);
DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)")
/* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */
.map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion_dt_init_irq,
- .init_time = orion5x_timer_init,
.init_machine = orion5x_dt_init,
.restart = orion5x_restart,
.dt_compat = orion5x_dt_compat,
--- /dev/null
+/*
+ * Maxtor Shared Storage II Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Maxtor Shared Storage II Info
+ ****************************************************************************/
+
+/****************************************************************************
+ * PCI setup
+ ****************************************************************************/
+static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ return -1;
+}
+
+static struct hw_pci mss2_pci __initdata = {
+ .nr_controllers = 2,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = mss2_pci_map_irq,
+};
+
+static int __init mss2_pci_init(void)
+{
+ if (machine_is_mss2())
+ pci_common_init(&mss2_pci);
+
+ return 0;
+}
+subsys_initcall(mss2_pci_init);
+
+/*****************************************************************************
+ * MSS2 power off method
+ ****************************************************************************/
+/*
+ * On the Maxtor Shared Storage II, the shutdown process is the following :
+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
+ * - The board reboots
+ * - U-boot starts and go into an idle mode until the user press "power"
+ */
+static void mss2_power_off(void)
+{
+ u32 reg;
+
+ /*
+ * Enable and issue soft reset
+ */
+ reg = readl(RSTOUTn_MASK);
+ reg |= 1 << 2;
+ writel(reg, RSTOUTn_MASK);
+
+ reg = readl(CPU_SOFT_RESET);
+ reg |= 1;
+ writel(reg, CPU_SOFT_RESET);
+}
+
+void __init mss2_init(void)
+{
+ /* register mss2 specific power-off method */
+ pm_power_off = mss2_power_off;
+}
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS 7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static void __init rd88f5182_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+ if (gpio_request(pin, "PCI IntA") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+ }
+
+ pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+ if (gpio_request(pin, "PCI IntB") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+ }
+}
+
+static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * PCI IRQs are connected via GPIOs
+ */
+ switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+ case 0:
+ if (pin == 1)
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+ else
+ return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = rd88f5182_pci_preinit,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+ if (of_machine_is_compatible("marvell,rd-88f5182-nas"))
+ pci_common_init(&rd88f5182_pci);
+
+ return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_EDMINI_V2_DT
-void edmini_v2_init(void);
-#else
-static inline void edmini_v2_init(void) {};
-#endif
-
struct meminfo;
struct tag;
extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *);
+#ifdef CONFIG_MACH_MSS2_DT
+extern void mss2_init(void);
+#else
+static inline void mss2_init(void) {}
+#endif
+
/*****************************************************************************
* Helpers to access Orion registers
****************************************************************************/
+++ /dev/null
-/*
- * arch/arm/mach-orion5x/d2net-setup.c
- *
- * LaCie d2Network and Big Disk Network NAS setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <plat/orion-gpio.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * LaCie d2 Network Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define D2NET_NOR_BOOT_BASE 0xfff80000
-#define D2NET_NOR_BOOT_SIZE SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on Boot Device
- ****************************************************************************/
-
-/*
- * TODO: Check write support on flash MX29LV400CBTC-70G
- */
-
-static struct mtd_partition d2net_partitions[] = {
- {
- .name = "Full512kb",
- .size = MTDPART_SIZ_FULL,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct physmap_flash_data d2net_nor_flash_data = {
- .width = 1,
- .parts = d2net_partitions,
- .nr_parts = ARRAY_SIZE(d2net_partitions),
-};
-
-static struct resource d2net_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = D2NET_NOR_BOOT_BASE,
- .end = D2NET_NOR_BOOT_BASE
- + D2NET_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device d2net_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &d2net_nor_flash_data,
- },
- .num_resources = 1,
- .resource = &d2net_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-/*
- * i2c addr | chip | description
- * 0x32 | Ricoh 5C372b | RTC
- * 0x3e | GMT G762 | PWM fan controller
- * 0x50 | HT24LC08 | eeprom (1kB)
- *
- * TODO: Add G762 support to the g760a driver.
- */
-static struct i2c_board_info __initdata d2net_i2c_devices[] = {
- {
- I2C_BOARD_INFO("rs5c372b", 0x32),
- }, {
- I2C_BOARD_INFO("24c08", 0x50),
- },
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_sata_data = {
- .n_ports = 2,
-};
-
-#define D2NET_GPIO_SATA0_POWER 3
-#define D2NET_GPIO_SATA1_POWER 12
-
-static void __init d2net_sata_power_init(void)
-{
- int err;
-
- err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
- if (err == 0) {
- err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
- if (err)
- gpio_free(D2NET_GPIO_SATA0_POWER);
- }
- if (err)
- pr_err("d2net: failed to configure SATA0 power GPIO\n");
-
- err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
- if (err == 0) {
- err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
- if (err)
- gpio_free(D2NET_GPIO_SATA1_POWER);
- }
- if (err)
- pr_err("d2net: failed to configure SATA1 power GPIO\n");
-}
-
-/*****************************************************************************
- * GPIO LED's
- ****************************************************************************/
-
-/*
- * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- * led_off | blink_ctrl | SATA active | LED state
- * | | |
- * 1 | x | x | off
- * 0 | 0 | 0 | off
- * 0 | 1 | 0 | blink (rate 300ms)
- * 0 | x | 1 | on
- *
- * Notes: The blue and the red front LED's can't be on at the same time.
- * Red LED have priority.
- */
-
-#define D2NET_GPIO_RED_LED 6
-#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16
-#define D2NET_GPIO_BLUE_LED_OFF 23
-
-static struct gpio_led d2net_leds[] = {
- {
- .name = "d2net:blue:sata",
- .default_trigger = "default-on",
- .gpio = D2NET_GPIO_BLUE_LED_OFF,
- .active_low = 1,
- },
- {
- .name = "d2net:red:fail",
- .gpio = D2NET_GPIO_RED_LED,
- },
-};
-
-static struct gpio_led_platform_data d2net_led_data = {
- .num_leds = ARRAY_SIZE(d2net_leds),
- .leds = d2net_leds,
-};
-
-static struct platform_device d2net_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &d2net_led_data,
- },
-};
-
-static void __init d2net_gpio_leds_init(void)
-{
- int err;
-
- /* Configure GPIO over MPP max number. */
- orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
-
- /* Configure register blink_ctrl to allow SATA activity LED blinking. */
- err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
- if (err == 0) {
- err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
- if (err)
- gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
- }
- if (err)
- pr_err("d2net: failed to configure blue LED blink GPIO\n");
-
- platform_device_register(&d2net_gpio_leds);
-}
-
-/****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_GPIO_PUSH_BUTTON 18
-#define D2NET_GPIO_POWER_SWITCH_ON 8
-#define D2NET_GPIO_POWER_SWITCH_OFF 9
-
-#define D2NET_SWITCH_POWER_ON 0x1
-#define D2NET_SWITCH_POWER_OFF 0x2
-
-static struct gpio_keys_button d2net_buttons[] = {
- {
- .type = EV_SW,
- .code = D2NET_SWITCH_POWER_OFF,
- .gpio = D2NET_GPIO_POWER_SWITCH_OFF,
- .desc = "Power rocker switch (auto|off)",
- .active_low = 0,
- },
- {
- .type = EV_SW,
- .code = D2NET_SWITCH_POWER_ON,
- .gpio = D2NET_GPIO_POWER_SWITCH_ON,
- .desc = "Power rocker switch (on|auto)",
- .active_low = 0,
- },
- {
- .type = EV_KEY,
- .code = KEY_POWER,
- .gpio = D2NET_GPIO_PUSH_BUTTON,
- .desc = "Front Push Button",
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_platform_data d2net_button_data = {
- .buttons = d2net_buttons,
- .nbuttons = ARRAY_SIZE(d2net_buttons),
-};
-
-static struct platform_device d2net_gpio_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &d2net_button_data,
- },
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_mpp_modes[] __initdata = {
- MPP0_GPIO, /* Board ID (bit 0) */
- MPP1_GPIO, /* Board ID (bit 1) */
- MPP2_GPIO, /* Board ID (bit 2) */
- MPP3_GPIO, /* SATA 0 power */
- MPP4_UNUSED,
- MPP5_GPIO, /* Fan fail detection */
- MPP6_GPIO, /* Red front LED */
- MPP7_UNUSED,
- MPP8_GPIO, /* Rear power switch (on|auto) */
- MPP9_GPIO, /* Rear power switch (auto|off) */
- MPP10_UNUSED,
- MPP11_UNUSED,
- MPP12_GPIO, /* SATA 1 power */
- MPP13_UNUSED,
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- MPP16_GPIO, /* Blue front LED blink control */
- MPP17_UNUSED,
- MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
- MPP19_UNUSED,
- 0,
- /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
- /* 23: Blue front LED off */
- /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
-};
-
-#define D2NET_GPIO_INHIBIT_POWER_OFF 24
-
-static void __init d2net_init(void)
-{
- /*
- * Setup basic Orion functions. Need to be called early.
- */
- orion5x_init();
-
- orion5x_mpp_conf(d2net_mpp_modes);
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
- orion5x_eth_init(&d2net_eth_data);
- orion5x_i2c_init();
- orion5x_uart0_init();
-
- d2net_sata_power_init();
- orion5x_sata_init(&d2net_sata_data);
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- D2NET_NOR_BOOT_BASE,
- D2NET_NOR_BOOT_SIZE);
- platform_device_register(&d2net_nor_flash);
-
- platform_device_register(&d2net_gpio_buttons);
-
- d2net_gpio_leds_init();
-
- pr_notice("d2net: Flash write are not yet supported.\n");
-
- i2c_register_board_info(0, d2net_i2c_devices,
- ARRAY_SIZE(d2net_i2c_devices));
-
- orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-
-#ifdef CONFIG_MACH_D2NET
-MACHINE_START(D2NET, "LaCie d2 Network")
- .atag_offset = 0x100,
- .init_machine = d2net_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_BIGDISK
-MACHINE_START(BIGDISK, "LaCie Big Disk Network")
- .atag_offset = 0x100,
- .init_machine = d2net_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END
-#endif
-
+++ /dev/null
-/*
- * arch/arm/mach-orion5x/edmini_v2-setup.c
- *
- * LaCie Ethernet Disk mini V2 Setup
- *
- * Copyright (C) 2008 Christopher Moore <moore@free.fr>
- * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mbus.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * EDMINI_V2 Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000
-#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-/*
- * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
- * -type device. This could cause risks of accidentally erasing critical
- * flash sectors. We thus define a single, write-protected partition covering
- * the whole flash.
- * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
- * code, break this into at least three partitions: 'u-boot code', 'u-boot
- * environment' and 'whatever is left'.
- */
-
-static struct mtd_partition edmini_v2_partitions[] = {
- {
- .name = "Full512kb",
- .size = 0x00080000,
- .offset = 0x00000000,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-
-static struct physmap_flash_data edmini_v2_nor_flash_data = {
- .width = 1,
- .parts = edmini_v2_partitions,
- .nr_parts = ARRAY_SIZE(edmini_v2_partitions),
-};
-
-static struct resource edmini_v2_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = EDMINI_V2_NOR_BOOT_BASE,
- .end = EDMINI_V2_NOR_BOOT_BASE
- + EDMINI_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device edmini_v2_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edmini_v2_nor_flash_data,
- },
- .num_resources = 1,
- .resource = &edmini_v2_nor_flash_resource,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-#define EDMINIV2_RTC_GPIO 3
-
-static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
- I2C_BOARD_INFO("rs5c372a", 0x32),
- .irq = 0,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int edminiv2_mpp_modes[] __initdata = {
- MPP0_UNUSED,
- MPP1_UNUSED,
- MPP2_UNUSED,
- MPP3_GPIO, /* RTC interrupt */
- MPP4_UNUSED,
- MPP5_UNUSED,
- MPP6_UNUSED,
- MPP7_UNUSED,
- MPP8_UNUSED,
- MPP9_UNUSED,
- MPP10_UNUSED,
- MPP11_UNUSED,
- MPP12_SATA_LED, /* SATA 0 presence */
- MPP13_SATA_LED, /* SATA 1 presence */
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- /* 16: Power LED control (0 = On, 1 = Off) */
- MPP16_GPIO,
- /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
- MPP17_GPIO,
- /* 18: Power button status (0 = Released, 1 = Pressed) */
- MPP18_GPIO,
- MPP19_UNUSED,
- 0,
-};
-
-void __init edmini_v2_init(void)
-{
- orion5x_mpp_conf(edminiv2_mpp_modes);
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- EDMINI_V2_NOR_BOOT_BASE,
- EDMINI_V2_NOR_BOOT_SIZE);
- platform_device_register(&edmini_v2_nor_flash);
-
- pr_notice("edmini_v2: USB device port, flash write and power-off "
- "are not yet supported.\n");
-
- /* Get RTC IRQ and register the chip */
- if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
- if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
- edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
- else
- gpio_free(EDMINIV2_RTC_GPIO);
- }
-
- if (edmini_v2_i2c_rtc.irq == 0)
- pr_warning("edmini_v2: failed to get RTC IRQ\n");
-
- i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
-}
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
+#include <asm/exception.h>
#include "common.h"
static int __initdata gpio0_irqs[4] = {
IRQ_ORION5X_GPIO_24_31,
};
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ */
+
+asmlinkage void
+__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(MAIN_IRQ_CAUSE);
+ stat &= readl_relaxed(MAIN_IRQ_MASK);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
+
void __init orion5x_init_irq(void)
{
orion_irq_init(0, MAIN_IRQ_MASK);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(orion5x_legacy_handle_irq);
+#endif
+
/*
* Initialize gpiolib for GPIOs 0-31.
*/
+++ /dev/null
-/*
- * Maxtor Shared Storage II Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MSS2_NOR_BOOT_BASE 0xff800000
-#define MSS2_NOR_BOOT_SIZE SZ_256K
-
-/*****************************************************************************
- * Maxtor Shared Storage II Info
- ****************************************************************************/
-
-/*
- * Maxtor Shared Storage II hardware :
- * - Marvell 88F5182-A2 C500
- * - Marvell 88E1111 Gigabit Ethernet PHY
- * - RTC M41T81 (@0x68) on I2C bus
- * - 256KB NOR flash
- * - 64MB of RAM
- */
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data mss2_nor_flash_data = {
- .width = 1,
-};
-
-static struct resource mss2_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = MSS2_NOR_BOOT_BASE,
- .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mss2_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mss2_nor_flash_data,
- },
- .resource = &mss2_nor_flash_resource,
- .num_resources = 1,
-};
-
-/****************************************************************************
- * PCI setup
- ****************************************************************************/
-static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- /*
- * Check for devices with hard-wired IRQs.
- */
- irq = orion5x_pci_map_irq(dev, slot, pin);
- if (irq != -1)
- return irq;
-
- return -1;
-}
-
-static struct hw_pci mss2_pci __initdata = {
- .nr_controllers = 2,
- .setup = orion5x_pci_sys_setup,
- .scan = orion5x_pci_sys_scan_bus,
- .map_irq = mss2_pci_map_irq,
-};
-
-static int __init mss2_pci_init(void)
-{
- if (machine_is_mss2())
- pci_common_init(&mss2_pci);
-
- return 0;
-}
-subsys_initcall(mss2_pci_init);
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data mss2_eth_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data mss2_sata_data = {
- .n_ports = 2,
-};
-
-/*****************************************************************************
- * GPIO buttons
- ****************************************************************************/
-
-#define MSS2_GPIO_KEY_RESET 12
-#define MSS2_GPIO_KEY_POWER 11
-
-static struct gpio_keys_button mss2_buttons[] = {
- {
- .code = KEY_POWER,
- .gpio = MSS2_GPIO_KEY_POWER,
- .desc = "Power",
- .active_low = 1,
- }, {
- .code = KEY_RESTART,
- .gpio = MSS2_GPIO_KEY_RESET,
- .desc = "Reset",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data mss2_button_data = {
- .buttons = mss2_buttons,
- .nbuttons = ARRAY_SIZE(mss2_buttons),
-};
-
-static struct platform_device mss2_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mss2_button_data,
- },
-};
-
-/*****************************************************************************
- * RTC m41t81 on I2C bus
- ****************************************************************************/
-
-#define MSS2_GPIO_RTC_IRQ 3
-
-static struct i2c_board_info __initdata mss2_i2c_rtc = {
- I2C_BOARD_INFO("m41t81", 0x68),
-};
-
-/*****************************************************************************
- * MSS2 power off method
- ****************************************************************************/
-/*
- * On the Maxtor Shared Storage II, the shutdown process is the following :
- * - Userland modifies U-boot env to tell U-boot to go idle at next boot
- * - The board reboots
- * - U-boot starts and go into an idle mode until the user press "power"
- */
-static void mss2_power_off(void)
-{
- u32 reg;
-
- /*
- * Enable and issue soft reset
- */
- reg = readl(RSTOUTn_MASK);
- reg |= 1 << 2;
- writel(reg, RSTOUTn_MASK);
-
- reg = readl(CPU_SOFT_RESET);
- reg |= 1;
- writel(reg, CPU_SOFT_RESET);
-}
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mss2_mpp_modes[] __initdata = {
- MPP0_GPIO, /* Power LED */
- MPP1_GPIO, /* Error LED */
- MPP2_UNUSED,
- MPP3_GPIO, /* RTC interrupt */
- MPP4_GPIO, /* HDD ind. (Single/Dual)*/
- MPP5_GPIO, /* HD0 5V control */
- MPP6_GPIO, /* HD0 12V control */
- MPP7_GPIO, /* HD1 5V control */
- MPP8_GPIO, /* HD1 12V control */
- MPP9_UNUSED,
- MPP10_GPIO, /* Fan control */
- MPP11_GPIO, /* Power button */
- MPP12_GPIO, /* Reset button */
- MPP13_UNUSED,
- MPP14_SATA_LED, /* SATA 0 active */
- MPP15_SATA_LED, /* SATA 1 active */
- MPP16_UNUSED,
- MPP17_UNUSED,
- MPP18_UNUSED,
- MPP19_UNUSED,
- 0,
-};
-
-static void __init mss2_init(void)
-{
- /* Setup basic Orion functions. Need to be called early. */
- orion5x_init();
-
- orion5x_mpp_conf(mss2_mpp_modes);
-
- /*
- * MPP[20] Unused
- * MPP[21] PCI clock
- * MPP[22] USB 0 over current
- * MPP[23] USB 1 over current
- */
-
- /*
- * Configure peripherals.
- */
- orion5x_ehci0_init();
- orion5x_ehci1_init();
- orion5x_eth_init(&mss2_eth_data);
- orion5x_i2c_init();
- orion5x_sata_init(&mss2_sata_data);
- orion5x_uart0_init();
- orion5x_xor_init();
-
- mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
- ORION_MBUS_DEVBUS_BOOT_ATTR,
- MSS2_NOR_BOOT_BASE,
- MSS2_NOR_BOOT_SIZE);
- platform_device_register(&mss2_nor_flash);
-
- platform_device_register(&mss2_button_device);
-
- if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
- if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
- mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
- else
- gpio_free(MSS2_GPIO_RTC_IRQ);
- }
- i2c_register_board_info(0, &mss2_i2c_rtc, 1);
-
- /* register mss2 specific power-off method */
- pm_power_off = mss2_power_off;
-}
-
-MACHINE_START(MSS2, "Maxtor Shared Storage II")
- /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .atag_offset = 0x100,
- .init_machine = mss2_init,
- .map_io = orion5x_map_io,
- .init_early = orion5x_init_early,
- .init_irq = orion5x_init_irq,
- .init_time = orion5x_timer_init,
- .fixup = tag_fixup_mem32,
- .restart = orion5x_restart,
-MACHINE_END
#include <linux/gpio.h>
#include <linux/mfd/asic3.h>
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select HAVE_SMP
select QCOM_SCM if SMP
help
Support for Qualcomm's devicetree based systems.
node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
if (!node) {
- pr_err("%s: could not find sram dt node\n", __func__);
+ pr_err("%s: could not find pmu dt node\n", __func__);
return;
}
select SH_CLK_CPG
select ARM_GIC
select SYS_SUPPORTS_SH_TMU
+ select RENESAS_INTC_IRQPIN
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select SYS_SUPPORTS_SH_CMT
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-config ARCH_EMEV2
- bool "Emma Mobile EV2"
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select CPU_V7
- select MIGHT_HAVE_PCI
- select USE_OF
- select AUTO_ZRELADDR
- select SYS_SUPPORTS_EM_STI
-
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select ARCH_WANT_OPTIONAL_GPIOLIB
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select RENESAS_INTC_IRQPIN
select SND_SOC_AK4554 if SND_SIMPLE_CARD
select SND_SOC_AK4642 if SND_SIMPLE_CARD
select USE_OF
bool "BOCK-W - Reference Device Tree Implementation"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
- select RENESAS_INTC_IRQPIN
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
# Clock objects
-ifndef CONFIG_COMMON_CLK
obj-y += clock.o
+ifndef CONFIG_COMMON_CLK
obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
-obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
.map_io = r8a7740_map_io,
- .init_early = r8a7740_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7740_init_irq_of,
.init_machine = eva_init,
.init_late = shmobile_init_late,
.platform = "sh_fsi2",
.daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
.cpu_dai = {
+ .fmt = SND_SOC_DAIFMT_IB_NF,
.name = "fsia-dai",
},
.codec_dai = {
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
- .init_early = r8a7791_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_add_standard_devices,
.init_late = shmobile_init_late,
DT_MACHINE_START(KOELSCH_DT, "koelsch")
.smp = smp_ops(r8a7791_smp_ops),
- .init_early = r8a7791_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = koelsch_init,
.init_late = shmobile_init_late,
.card = "SSI01-AK4643",
.codec = "ak4642-codec.2-0012",
.platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_LEFT_J,
+ .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
.cpu_dai = {
.name = "rcar_sound",
- .fmt = SND_SOC_DAIFMT_CBS_CFS,
},
.codec_dai = {
.name = "ak4642-hifi",
- .fmt = SND_SOC_DAIFMT_CBM_CFM,
.sysclk = 11289600,
},
};
+++ /dev/null
-/*
- * Emma Mobile EV2 clock framework support
- *
- * Copyright (C) 2012 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-#define EMEV2_SMU_BASE 0xe0110000
-
-/* EMEV2 SMU registers */
-#define USIAU0_RSTCTRL 0x094
-#define USIBU1_RSTCTRL 0x0ac
-#define USIBU2_RSTCTRL 0x0b0
-#define USIBU3_RSTCTRL 0x0b4
-#define STI_RSTCTRL 0x124
-#define USIAU0GCLKCTRL 0x4a0
-#define USIBU1GCLKCTRL 0x4b8
-#define USIBU2GCLKCTRL 0x4bc
-#define USIBU3GCLKCTRL 0x04c0
-#define STIGCLKCTRL 0x528
-#define USIAU0SCLKDIV 0x61c
-#define USIB2SCLKDIV 0x65c
-#define USIB3SCLKDIV 0x660
-#define STI_CLKSEL 0x688
-
-/* not pretty, but hey */
-static void __iomem *smu_base;
-
-static void emev2_smu_write(unsigned long value, int offs)
-{
- BUG_ON(!smu_base || (offs >= PAGE_SIZE));
- iowrite32(value, smu_base + offs);
-}
-
-static struct clk_mapping smu_mapping = {
- .phys = EMEV2_SMU_BASE,
- .len = PAGE_SIZE,
-};
-
-/* Fixed 32 KHz root clock from C32K pin */
-static struct clk c32k_clk = {
- .rate = 32768,
- .mapping = &smu_mapping,
-};
-
-/* PLL3 multiplies C32K with 7000 */
-static unsigned long pll3_recalc(struct clk *clk)
-{
- return clk->parent->rate * 7000;
-}
-
-static struct sh_clk_ops pll3_clk_ops = {
- .recalc = pll3_recalc,
-};
-
-static struct clk pll3_clk = {
- .ops = &pll3_clk_ops,
- .parent = &c32k_clk,
-};
-
-static struct clk *main_clks[] = {
- &c32k_clk,
- &pll3_clk,
-};
-
-enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3,
- SCLKDIV_NR };
-
-#define SCLKDIV(_reg, _shift) \
-{ \
- .parent = &pll3_clk, \
- .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \
- .enable_bit = _shift, \
-}
-
-static struct clk sclkdiv_clks[SCLKDIV_NR] = {
- [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0),
- [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16),
- [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0),
- [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0),
-};
-
-enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK,
- GCLK_STI_SCLK,
- GCLK_NR };
-
-#define GCLK_SCLK(_parent, _reg) \
-{ \
- .parent = _parent, \
- .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \
- .enable_bit = 1, /* SCLK_GCC */ \
-}
-
-static struct clk gclk_clks[GCLK_NR] = {
- [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0],
- USIAU0GCLKCTRL),
- [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1],
- USIBU1GCLKCTRL),
- [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2],
- USIBU2GCLKCTRL),
- [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3],
- USIBU3GCLKCTRL),
- [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL),
-};
-
-static int emev2_gclk_enable(struct clk *clk)
-{
- iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit),
- clk->mapped_reg);
- return 0;
-}
-
-static void emev2_gclk_disable(struct clk *clk)
-{
- iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit),
- clk->mapped_reg);
-}
-
-static struct sh_clk_ops emev2_gclk_clk_ops = {
- .enable = emev2_gclk_enable,
- .disable = emev2_gclk_disable,
- .recalc = followparent_recalc,
-};
-
-static int __init emev2_gclk_register(struct clk *clks, int nr)
-{
- struct clk *clkp;
- int ret = 0;
- int k;
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
- clkp->ops = &emev2_gclk_clk_ops;
- ret |= clk_register(clkp);
- }
-
- return ret;
-}
-
-static unsigned long emev2_sclkdiv_recalc(struct clk *clk)
-{
- unsigned int sclk_div;
-
- sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff;
-
- return clk->parent->rate / (sclk_div + 1);
-}
-
-static struct sh_clk_ops emev2_sclkdiv_clk_ops = {
- .recalc = emev2_sclkdiv_recalc,
-};
-
-static int __init emev2_sclkdiv_register(struct clk *clks, int nr)
-{
- struct clk *clkp;
- int ret = 0;
- int k;
-
- for (k = 0; !ret && (k < nr); k++) {
- clkp = clks + k;
- clkp->ops = &emev2_sclkdiv_clk_ops;
- ret |= clk_register(clkp);
- }
-
- return ret;
-}
-
-static struct clk_lookup lookups[] = {
- CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]),
- CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]),
- CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]),
- CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]),
- CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]),
- CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]),
- CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]),
- CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]),
- CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]),
- CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]),
-};
-
-void __init emev2_clock_init(void)
-{
- int k, ret = 0;
-
- smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
- BUG_ON(!smu_base);
-
- /* setup STI timer to run on 32.768 kHz and deassert reset */
- emev2_smu_write(0, STI_CLKSEL);
- emev2_smu_write(1, STI_RSTCTRL);
-
- /* deassert reset for UART0->UART3 */
- emev2_smu_write(2, USIAU0_RSTCTRL);
- emev2_smu_write(2, USIBU1_RSTCTRL);
- emev2_smu_write(2, USIBU2_RSTCTRL);
- emev2_smu_write(2, USIBU3_RSTCTRL);
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR);
-
- if (!ret)
- ret = emev2_gclk_register(gclk_clks, GCLK_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup emev2 clocks\n");
-}
CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]),
- CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]),
+ CLKDEV_DEV_ID("e9a00000.ethernet", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]),
CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]),
[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */
[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */
- [MSTP007] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 7, 0), /* HSPI */
+ [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */
};
static struct clk_lookup lookups[] = {
/* main */
- CLKDEV_CON_ID("audio_clk_a", &audio_clk_a),
- CLKDEV_CON_ID("audio_clk_b", &audio_clk_b),
- CLKDEV_CON_ID("audio_clk_c", &audio_clk_c),
- CLKDEV_CON_ID("audio_clk_internal", &s1_clk),
CLKDEV_CON_ID("shyway_clk", &s_clk),
CLKDEV_CON_ID("peripheral_clk", &p_clk),
CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
- CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP531]),
- CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP530]),
- CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP529]),
- CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP528]),
- CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP527]),
- CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP526]),
- CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP525]),
- CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP524]),
- CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP523]),
+ CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
+ CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
+ CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
+ CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
+ CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
+ CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
+ CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
+ CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
+ CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
};
void __init r8a7778_clock_init(void)
[MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */
[MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */
[MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */
- [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
static struct clk_lookup lookups[] = {
/* main clocks */
- CLKDEV_CON_ID("audio_clk_a", &audio_clk_a),
- CLKDEV_CON_ID("audio_clk_b", &audio_clk_b),
- CLKDEV_CON_ID("audio_clk_c", &audio_clk_c),
- CLKDEV_CON_ID("audio_clk_internal", &m2_clk),
CLKDEV_CON_ID("extal", &extal_clk),
CLKDEV_CON_ID("extal_div2", &extal_div2_clk),
CLKDEV_CON_ID("main", &main_clk),
CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk),
- CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]),
- CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]),
- CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]),
- CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]),
- CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]),
- CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]),
- CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]),
- CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]),
- CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]),
- CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]),
+ CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]),
+ CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]),
+ CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]),
+ CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]),
+ CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]),
+ CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]),
+ CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]),
+ CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]),
+ CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]),
+ CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]),
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/rcar-gen2.h>
/*
* MD EXTAL PLL0 PLL1 PLL3
* see "p1 / 2" on R8A7791_CLOCK_ROOT() below
*/
-#define MD(nr) (1 << nr)
-
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
#define MSTPSR9 IOMEM(0xe61509a4)
#define MSTPSR11 IOMEM(0xe61509ac)
-#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
#define SD1CKCR 0xE6150078
#define SD2CKCR 0xE615026c
[MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */
[MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */
[MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */
- [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
- [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
- [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
+ [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
+ [MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
[MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
[MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
void __init r8a7791_clock_init(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
+ u32 mode = rcar_gen2_read_mode_pins();
int k, ret = 0;
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
switch (mode & (MD(14) | MD(13))) {
case 0:
R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
*/
#include <linux/kernel.h>
#include <linux/init.h>
+
+#ifdef CONFIG_COMMON_CLK
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <mach/clock.h>
+
+void __init shmobile_clk_workaround(const struct clk_name *clks,
+ int nr_clks, bool enable)
+{
+ const struct clk_name *clkn;
+ struct clk *clk;
+ unsigned int i;
+
+ for (i = 0; i < nr_clks; ++i) {
+ clkn = clks + i;
+ clk = clk_get(NULL, clkn->clk);
+ if (!IS_ERR(clk)) {
+ clk_register_clkdev(clk, clkn->con_id, clkn->dev_id);
+ if (enable)
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ }
+ }
+}
+
+#else /* CONFIG_COMMON_CLK */
#include <linux/sh_clk.h>
#include <linux/export.h>
#include <mach/clock.h>
{
}
EXPORT_SYMBOL(__clk_put);
+
+#endif /* CONFIG_COMMON_CLK */
#ifndef CLOCK_H
#define CLOCK_H
+#ifdef CONFIG_COMMON_CLK
+/* temporary clock configuration helper for platform devices */
+
+struct clk_name {
+ const char *clk;
+ const char *con_id;
+ const char *dev_id;
+};
+
+void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks,
+ bool enable);
+
+#else /* CONFIG_COMMON_CLK */
+/* legacy clock implementation */
+
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
(p)->div = d; \
} while (0)
+#endif /* CONFIG_COMMON_CLK */
#endif
extern void shmobile_earlytimer_init(void);
extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
unsigned int mult, unsigned int div);
+extern void shmobile_init_delay(void);
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_boot_vector(void);
+++ /dev/null
-#ifndef __ASM_EMEV2_H__
-#define __ASM_EMEV2_H__
-
-extern void emev2_map_io(void);
-extern void emev2_init_delay(void);
-extern void emev2_clock_init(void);
-extern struct smp_operations emev2_smp_ops;
-
-#endif /* __ASM_EMEV2_H__ */
};
extern void r8a7740_meram_workaround(void);
-extern void r8a7740_init_delay(void);
extern void r8a7740_init_irq_of(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
void r8a7791_pinmux_init(void);
-void r8a7791_init_early(void);
extern struct smp_operations r8a7791_smp_ops;
#endif /* __ASM_R8A7791_H__ */
static bool rmobile_pd_active_wakeup(struct device *dev)
{
- bool (*active_wakeup)(struct device *dev);
-
- active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
- return active_wakeup ? active_wakeup(dev) : true;
-}
-
-static int rmobile_pd_stop_dev(struct device *dev)
-{
- int (*stop)(struct device *dev);
-
- stop = dev_gpd_data(dev)->ops.stop;
- if (stop) {
- int ret = stop(dev);
- if (ret)
- return ret;
- }
- return pm_clk_suspend(dev);
-}
-
-static int rmobile_pd_start_dev(struct device *dev)
-{
- int (*start)(struct device *dev);
- int ret;
-
- ret = pm_clk_resume(dev);
- if (ret)
- return ret;
-
- start = dev_gpd_data(dev)->ops.start;
- if (start)
- ret = start(dev);
-
- return ret;
+ return true;
}
static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
struct dev_power_governor *gov = rmobile_pd->gov;
pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
- genpd->dev_ops.stop = rmobile_pd_stop_dev;
- genpd->dev_ops.start = rmobile_pd_start_dev;
+ genpd->dev_ops.stop = pm_clk_suspend;
+ genpd->dev_ops.start = pm_clk_resume;
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
genpd->dev_irq_safe = true;
genpd->power_off = rmobile_pd_power_down;
#include <linux/init.h>
#include <linux/of_platform.h>
#include <mach/common.h>
-#include <mach/emev2.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#endif
};
-void __init emev2_map_io(void)
+static void __init emev2_map_io(void)
{
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
-void __init emev2_init_delay(void)
+static void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
static void __init emev2_add_standard_devices_dt(void)
{
-#ifdef CONFIG_COMMON_CLK
of_clk_init(NULL);
-#else
- emev2_clock_init();
-#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
NULL,
};
+extern struct smp_operations emev2_smp_ops;
+
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-void __init r8a7740_init_delay(void)
-{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-};
-
void __init r8a7740_init_irq_of(void)
{
void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
.map_io = r8a7740_map_io,
- .init_early = r8a7740_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7740_init_irq_of,
.init_machine = r8a7740_generic_init,
+ .init_late = shmobile_init_late,
.dt_compat = r8a7740_boards_compat_dt,
MACHINE_END
r8a7790_register_gpio(3);
r8a7790_register_gpio(4);
r8a7790_register_gpio(5);
- r8a7790_register_i2c(0);
- r8a7790_register_i2c(1);
- r8a7790_register_i2c(2);
- r8a7790_register_i2c(3);
- r8a7790_register_audio_dmac(0);
- r8a7790_register_audio_dmac(1);
}
#define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \
r8a7790_add_dt_devices();
r8a7790_register_irqc(0);
r8a7790_register_thermal();
+ r8a7790_register_i2c(0);
+ r8a7790_register_i2c(1);
+ r8a7790_register_i2c(2);
+ r8a7790_register_i2c(3);
+ r8a7790_register_audio_dmac(0);
+ r8a7790_register_audio_dmac(1);
}
void __init r8a7790_init_early(void)
r8a7791_register_thermal();
}
-void __init r8a7791_init_early(void)
-{
-#ifndef CONFIG_ARM_ARCH_TIMER
- shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
-#endif
-}
-
#ifdef CONFIG_USE_OF
static const char *r8a7791_boards_compat_dt[] __initdata = {
"renesas,r8a7791",
DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
.smp = smp_ops(r8a7791_smp_ops),
- .init_early = r8a7791_init_early,
+ .init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.dt_compat = r8a7791_boards_compat_dt,
MACHINE_END
u32 rcar_gen2_read_mode_pins(void)
{
- void __iomem *modemr = ioremap_nocache(MODEMR, 4);
- u32 mode;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
+ static u32 mode;
+ static bool mode_valid;
+
+ if (!mode_valid) {
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+ mode_valid = true;
+ }
return mode;
}
#include <linux/io.h>
#include <linux/delay.h>
#include <mach/common.h>
-#include <mach/emev2.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
#include <mach/common.h>
#include <mach/r8a7791.h>
+#include <mach/rcar-gen2.h>
#define RST 0xe6160000
#define CA15BAR 0x0020
iounmap(p);
}
+static int r8a7791_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ /* Error out when hardware debug mode is enabled */
+ if (rcar_gen2_read_mode_pins() & BIT(21)) {
+ pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu);
+ return -ENOTSUPP;
+ }
+
+ return shmobile_smp_apmu_boot_secondary(cpu, idle);
+}
+
struct smp_operations r8a7791_smp_ops __initdata = {
.smp_prepare_cpus = r8a7791_smp_prepare_cpus,
- .smp_boot_secondary = shmobile_smp_apmu_boot_secondary,
+ .smp_boot_secondary = r8a7791_smp_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_disable = shmobile_smp_cpu_disable,
.cpu_die = shmobile_smp_apmu_cpu_die,
#include <linux/platform_device.h>
#include <linux/clocksource.h>
#include <linux/delay.h>
+#include <linux/of_address.h>
+
+void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
+ unsigned int mult, unsigned int div)
+{
+ /* calculate a worst-case loops-per-jiffy value
+ * based on maximum cpu core hz setting and the
+ * __delay() implementation in arch/arm/lib/delay.S
+ *
+ * this will result in a longer delay than expected
+ * when the cpu core runs on lower frequencies.
+ */
+
+ unsigned int value = HZ * div / mult;
+
+ if (!preset_lpj)
+ preset_lpj = max_cpu_core_hz / value;
+}
void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
unsigned int mult, unsigned int div)
preset_lpj = max_cpu_core_mhz * value;
}
+void __init shmobile_init_delay(void)
+{
+ struct device_node *np, *parent;
+ u32 max_freq, freq;
+
+ max_freq = 0;
+
+ parent = of_find_node_by_path("/cpus");
+ if (parent) {
+ for_each_child_of_node(parent, np) {
+ if (!of_property_read_u32(np, "clock-frequency", &freq))
+ max_freq = max(max_freq, freq);
+ }
+ of_node_put(parent);
+ }
+
+ if (max_freq) {
+ if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
+ if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+ shmobile_setup_delay_hz(max_freq, 2, 4);
+ }
+}
+
static void __init shmobile_late_time_init(void)
{
/*
static int clockevent_next_event(unsigned long evt,
struct clock_event_device *clk_event_dev);
-static void spear_clocksource_init(void)
+static void __init spear_clocksource_init(void)
{
u32 tick_rate;
u16 val;
static const char *stih41x_dt_match[] __initdata = {
"st,stih415",
"st,stih416",
+ "st,stih407",
NULL
};
-config ARCH_SUNXI
- bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
- select ARCH_HAS_RESET_CONTROLLER
+menuconfig ARCH_SUNXI
+ bool "Allwinner SoCs" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
- select ARM_GIC
- select ARM_PSCI
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select HAVE_ARM_ARCH_TIMER
select PINCTRL
select PINCTRL_SUNXI
- select RESET_CONTROLLER
select SUN4I_TIMER
+
+if ARCH_SUNXI
+
+config MACH_SUN4I
+ bool "Allwinner A10 (sun4i) SoCs support"
+ default ARCH_SUNXI
+
+config MACH_SUN5I
+ bool "Allwinner A10s / A13 (sun5i) SoCs support"
+ default ARCH_SUNXI
+ select SUN5I_HSTIMER
+
+config MACH_SUN6I
+ bool "Allwinner A31 (sun6i) SoCs support"
+ default ARCH_SUNXI
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_GIC
+ select MFD_SUN6I_PRCM
+ select RESET_CONTROLLER
+ select SUN5I_HSTIMER
+
+config MACH_SUN7I
+ bool "Allwinner A20 (sun7i) SoCs support"
+ default ARCH_SUNXI
+ select ARM_GIC
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
select SUN5I_HSTIMER
+
+endif
which controls AHB bus master arbitration and some
performance parameters(priority, prefech size).
-config TEGRA_EMC_SCALING_ENABLE
- bool "Enable scaling the memory frequency"
-
endmenu
#define PMC_REMOVE_CLAMPING 0x34
#define PMC_PWRGATE_STATUS 0x38
+#define PMC_SCRATCH0 0x50
+#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31)
+#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30)
+#define PMC_SCRATCH0_MODE_RCM (1 << 1)
+#define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \
+ PMC_SCRATCH0_MODE_BOOTLOADER | \
+ PMC_SCRATCH0_MODE_RCM)
+
#define PMC_CPUPWRGOOD_TIMER 0xc8
#define PMC_CPUPWROFF_TIMER 0xcc
{
u32 val;
+ val = tegra_pmc_readl(PMC_SCRATCH0);
+ val &= ~PMC_SCRATCH0_MODE_MASK;
+
+ if (cmd) {
+ if (strcmp(cmd, "recovery") == 0)
+ val |= PMC_SCRATCH0_MODE_RECOVERY;
+
+ if (strcmp(cmd, "bootloader") == 0)
+ val |= PMC_SCRATCH0_MODE_BOOTLOADER;
+
+ if (strcmp(cmd, "forced-recovery") == 0)
+ val |= PMC_SCRATCH0_MODE_RCM;
+ }
+
+ tegra_pmc_writel(val, PMC_SCRATCH0);
+
val = tegra_pmc_readl(0);
val |= 0x10;
tegra_pmc_writel(val, 0);
static int dcscb_power_up(unsigned int cpu, unsigned int cluster)
{
unsigned int rst_hold, cpumask = (1 << cpu);
- unsigned int all_mask = dcscb_allcpus_mask[cluster];
+ unsigned int all_mask;
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
if (cpu >= 4 || cluster >= 2)
return -EINVAL;
+ all_mask = dcscb_allcpus_mask[cluster];
+
/*
* Since this is called with IRQs enabled, and no arch_spin_lock_irq
* variant exists, we need to disable IRQs manually here.
cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
cpumask = (1 << cpu);
- all_mask = dcscb_allcpus_mask[cluster];
pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
BUG_ON(cpu >= 4 || cluster >= 2);
+ all_mask = dcscb_allcpus_mask[cluster];
+
__mcpm_cpu_going_down(cpu, cluster);
arch_spin_lock(&dcscb_lock);
* +--------------------------+
* | 31 20 | 19 0 |
* +--------------------------+
- * | u_volt | freq(kHz) |
+ * | m_volt | freq(kHz) |
* +--------------------------+
*/
#define MULT_FACTOR 20
ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
if (!ret) {
opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
- opps->u_volt = data >> VOLT_SHIFT;
+ opps->u_volt = (data >> VOLT_SHIFT) * 1000;
} else {
break;
}
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
- select TLS_REG_EMUL if SMP || !MMU
select NEED_KUSER_HELPERS
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
- select TLS_REG_EMUL if SMP || !MMU
select NEED_KUSER_HELPERS
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v4T
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
- select TLS_REG_EMUL if SMP || !MMU
select NEED_KUSER_HELPERS
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v5
bool
select CPU_USE_DOMAINS if MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
- select TLS_REG_EMUL if SMP || !MMU
select NEED_KUSER_HELPERS
+ select TLS_REG_EMUL if SMP || !MMU
config CPU_32v6
bool
mapping->nr_bitmaps = 1;
mapping->extensions = extensions;
mapping->base = base;
- mapping->size = bitmap_size << PAGE_SHIFT;
mapping->bits = BITS_PER_BYTE * bitmap_size;
+ mapping->size = mapping->bits << PAGE_SHIFT;
spin_lock_init(&mapping->lock);
orion_gpio_chip_count++;
}
-
-#ifdef CONFIG_OF
-static void __init orion_gpio_of_init_one(struct device_node *np,
- int irq_gpio_base)
-{
- int ngpio, gpio_base, mask_offset;
- void __iomem *base;
- int ret, i;
- int irqs[4];
- int secondary_irq_base;
-
- ret = of_property_read_u32(np, "ngpio", &ngpio);
- if (ret)
- goto out;
- ret = of_property_read_u32(np, "mask-offset", &mask_offset);
- if (ret == -EINVAL)
- mask_offset = 0;
- else
- goto out;
- base = of_iomap(np, 0);
- if (!base)
- goto out;
-
- secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count);
- gpio_base = 32 * orion_gpio_chip_count;
-
- /* Get the interrupt numbers. Each chip can have up to 4
- * interrupt handlers, with each handler dealing with 8 GPIO
- * pins. */
-
- for (i = 0; i < 4; i++)
- irqs[i] = irq_of_parse_and_map(np, i);
-
- orion_gpio_init(np, gpio_base, ngpio, base, mask_offset,
- secondary_irq_base, irqs);
- return;
-out:
- pr_err("%s: %s: missing mandatory property\n", __func__, np->name);
-}
-
-void __init orion_gpio_of_init(int irq_gpio_base)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "marvell,orion-gpio")
- orion_gpio_of_init_one(np, irq_gpio_base);
-}
-#endif
#define __PLAT_IRQ_H
void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
-void __init orion_dt_init_irq(void);
#endif
int secondary_irq_base,
int irq[4]);
-void __init orion_gpio_of_init(int irq_gpio_base);
#endif
#include <plat/orion-gpio.h>
#include <mach/bridge-regs.h>
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- *
- * Notes:
- * - this is prepared for Kirkwood and Dove only, update
- * accordingly if you add Orion5x or MV78x00.
- * - Orion5x uses different macro names and has only one
- * set of CAUSE/MASK registers.
- * - MV78x00 uses the same macro names but has a third
- * set of CAUSE/MASK registers.
- *
- */
-
-static void __iomem *orion_irq_base = IRQ_VIRT_BASE;
-
-asmlinkage void
-__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs)
-{
- u32 stat;
-
- stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF);
- stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF);
- if (stat) {
- unsigned int hwirq = __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
- stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF);
- stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF);
- if (stat) {
- unsigned int hwirq = 32 + __fls(stat);
- handle_IRQ(hwirq, regs);
- return;
- }
-}
-#endif
-
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
struct irq_chip_generic *gc;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
- set_handle_irq(orion_legacy_handle_irq);
-#endif
-}
-
-#ifdef CONFIG_OF
-static int __init orion_add_irq_domain(struct device_node *np,
- struct device_node *interrupt_parent)
-{
- int i = 0;
- void __iomem *base;
-
- do {
- base = of_iomap(np, i);
- if (base) {
- orion_irq_init(i * 32, base + 0x04);
- i++;
- }
- } while (base);
-
- irq_domain_add_legacy(np, i * 32, 0, 0,
- &irq_domain_simple_ops, NULL);
- return 0;
-}
-
-static const struct of_device_id orion_irq_match[] = {
- { .compatible = "marvell,orion-intc",
- .data = orion_add_irq_domain, },
- {},
-};
-
-void __init orion_dt_init_irq(void)
-{
- of_irq_init(orion_irq_match);
}
-#endif
vdp.sign = vfp_sign_negate(vdp.sign);
vfp_double_unpack(&vdn, vfp_get_double(dd));
+ if (vdn.exponent == 0 && vdn.significand)
+ vfp_double_normalise_denormal(&vdn);
if (negate & NEG_SUBTRACT)
vdn.sign = vfp_sign_negate(vdn.sign);
v = vfp_get_float(sd);
pr_debug("VFP: s%u = %08x\n", sd, v);
vfp_single_unpack(&vsn, v);
+ if (vsn.exponent == 0 && vsn.significand)
+ vfp_single_normalise_denormal(&vsn);
if (negate & NEG_SUBTRACT)
vsn.sign = vfp_sign_negate(vsn.sign);
source "drivers/cpuidle/Kconfig"
-source "kernel/power/Kconfig"
-
source "drivers/cpufreq/Kconfig"
endmenu
<0x0 0x1f21e000 0x0 0x1000>,
<0x0 0x1f217000 0x0 0x1000>;
interrupts = <0x0 0x86 0x4>;
+ dma-coherent;
status = "disabled";
clocks = <&sata01clk 0>;
phys = <&phy1 0>;
<0x0 0x1f22e000 0x0 0x1000>,
<0x0 0x1f227000 0x0 0x1000>;
interrupts = <0x0 0x87 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sata23clk 0>;
phys = <&phy2 0>;
<0x0 0x1f23d000 0x0 0x1000>,
<0x0 0x1f23e000 0x0 0x1000>;
interrupts = <0x0 0x88 0x4>;
+ dma-coherent;
status = "ok";
clocks = <&sata45clk 0>;
phys = <&phy3 0>;
void *vdso;
} mm_context_t;
+#define INIT_MM_CONTEXT(name) \
+ .context.id_lock = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock),
+
#define ASID(mm) ((mm)->context.id & 0xffff)
extern void paging_init(void);
#ifndef __ASM_TLB_H
#define __ASM_TLB_H
+#define __tlb_remove_pmd_tlb_entry __tlb_remove_pmd_tlb_entry
#include <asm-generic/tlb.h>
}
#endif
+static inline void __tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp,
+ unsigned long address)
+{
+ tlb_add_flush(tlb, address);
+}
#endif
__SYSCALL(379, sys_finit_module)
__SYSCALL(380, sys_sched_setattr)
__SYSCALL(381, sys_sched_getattr)
+__SYSCALL(382, sys_renameat2)
-#define __NR_compat_syscalls 379
+#define __NR_compat_syscalls 383
/*
* Compat syscall numbers used by the AArch64 kernel.
if (call_break_hook(regs, esr) == DBG_HOOK_HANDLED)
return 0;
- pr_warn("unexpected brk exception at %lx, esr=0x%x\n",
- (long)instruction_pointer(regs), esr);
-
if (!user_mode(regs))
return -EFAULT;
}
/* no options parsing yet */
- if (paddr) {
- set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr);
- early_base = (void __iomem *)fix_to_virt(FIX_EARLYCON_MEM_BASE);
- }
+ if (paddr)
+ early_base = (void __iomem *)set_fixmap_offset_io(FIX_EARLYCON_MEM_BASE, paddr);
printch = match->printch;
early_console = &early_console_dev;
static int __init arm64_device_init(void)
{
- of_clk_init(NULL);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
return 0;
}
-arch_initcall(arm64_device_init);
+arch_initcall_sync(arm64_device_init);
static DEFINE_PER_CPU(struct cpu, cpu_data);
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
#include <clocksource/arm_arch_timer.h>
{
u32 arch_timer_rate;
+ of_clk_init(NULL);
clocksource_of_init();
arch_timer_rate = arch_timer_get_rate();
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/dma-contiguous.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
#include <linux/vmalloc.h>
#include <linux/swiotlb.h>
+#include <linux/amba/bus.h>
#include <asm/cacheflush.h>
};
EXPORT_SYMBOL(coherent_swiotlb_dma_ops);
+static int dma_bus_notifier(struct notifier_block *nb,
+ unsigned long event, void *_dev)
+{
+ struct device *dev = _dev;
+
+ if (event != BUS_NOTIFY_ADD_DEVICE)
+ return NOTIFY_DONE;
+
+ if (of_property_read_bool(dev->of_node, "dma-coherent"))
+ set_dma_ops(dev, &coherent_swiotlb_dma_ops);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block platform_bus_nb = {
+ .notifier_call = dma_bus_notifier,
+};
+
+static struct notifier_block amba_bus_nb = {
+ .notifier_call = dma_bus_notifier,
+};
+
extern int swiotlb_late_init_with_default_size(size_t default_size);
static int __init swiotlb_late_init(void)
{
size_t swiotlb_size = min(SZ_64M, MAX_ORDER_NR_PAGES << PAGE_SHIFT);
- dma_ops = &coherent_swiotlb_dma_ops;
+ /*
+ * These must be registered before of_platform_populate().
+ */
+ bus_register_notifier(&platform_bus_type, &platform_bus_nb);
+ bus_register_notifier(&amba_bustype, &amba_bus_nb);
+
+ dma_ops = &noncoherent_swiotlb_dma_ops;
return swiotlb_late_init_with_default_size(swiotlb_size);
}
-subsys_initcall(swiotlb_late_init);
+arch_initcall(swiotlb_late_init);
#define PREALLOC_DMA_DEBUG_ENTRIES 4096
if (pmd_none(*pmd))
return 0;
+ if (pmd_sect(*pmd))
+ return pfn_valid(pmd_pfn(*pmd));
+
pte = pte_offset_kernel(pmd, addr);
if (pte_none(*pte))
return 0;
+++ /dev/null
-/*
- * Memory barrier definitions for the Hexagon architecture
- *
- * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef _ASM_BARRIER_H
-#define _ASM_BARRIER_H
-
-#define rmb() barrier()
-#define read_barrier_depends() barrier()
-#define wmb() barrier()
-#define mb() barrier()
-#define smp_rmb() barrier()
-#define smp_read_barrier_depends() barrier()
-#define smp_wmb() barrier()
-#define smp_mb() barrier()
-
-/* Set a value and use a memory barrier. Used by the scheduler somewhere. */
-#define set_mb(var, value) \
- do { var = value; mb(); } while (0)
-
-#endif /* _ASM_BARRIER_H */
#define RR_RID_MASK 0x00000000ffffff00L
#define RR_TO_RID(val) ((val >> 8) & 0xffffff)
-/*
- * Flush the TLB for address range START to END and, if not in fast mode, release the
- * freed pages that where gathered up to this point.
- */
static inline void
-ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+ia64_tlb_flush_mmu_tlbonly(struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
- unsigned long i;
- unsigned int nr;
-
- if (!tlb->need_flush)
- return;
tlb->need_flush = 0;
if (tlb->fullmm) {
flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
}
+}
+
+static inline void
+ia64_tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
+ unsigned long i;
+ unsigned int nr;
+
/* lastly, release the freed pages */
nr = tlb->nr;
free_page_and_swap_cache(tlb->pages[i]);
}
+/*
+ * Flush the TLB for address range START to END and, if not in fast mode, release the
+ * freed pages that where gathered up to this point.
+ */
+static inline void
+ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+ if (!tlb->need_flush)
+ return;
+ ia64_tlb_flush_mmu_tlbonly(tlb, start, end);
+ ia64_tlb_flush_mmu_free(tlb);
+}
+
static inline void __tlb_alloc_page(struct mmu_gather *tlb)
{
unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0);
return tlb->max - tlb->nr;
}
+static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
+{
+ ia64_tlb_flush_mmu_tlbonly(tlb, tlb->start_addr, tlb->end_addr);
+}
+
+static inline void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
+ ia64_tlb_flush_mmu_free(tlb);
+}
+
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr);
cpumask_clear(&new_affinity);
cpumask_set_cpu(cpumask_first(cpu_online_mask), &new_affinity);
}
- __irq_set_affinity_locked(data, &new_affinity);
+ irq_set_affinity_locked(data, &new_affinity, false);
}
static int octeon_irq_ciu_set_affinity(struct irq_data *data,
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+generic-y += resource.h
+
header-y += bitsperlong.h
header-y += byteorder.h
header-y += errno.h
header-y += pdc.h
header-y += posix_types.h
header-y += ptrace.h
-header-y += resource.h
header-y += sembuf.h
header-y += setup.h
header-y += shmbuf.h
+++ /dev/null
-#ifndef _ASM_PARISC_RESOURCE_H
-#define _ASM_PARISC_RESOURCE_H
-
-#define _STK_LIM_MAX 10 * _STK_LIM
-#include <asm-generic/resource.h>
-
-#endif
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
*/
-static char cmdline[COMMAND_LINE_SIZE]
+static char cmdline[BOOT_COMMAND_LINE_SIZE]
__attribute__((__section__("__builtin_cmdline")));
static void prep_cmdline(void *chosen)
{
if (cmdline[0] == '\0')
- getprop(chosen, "bootargs", cmdline, COMMAND_LINE_SIZE-1);
+ getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1);
printf("\n\rLinux/PowerPC load: %s", cmdline);
/* If possible, edit the command line */
if (console_ops.edit_cmdline)
- console_ops.edit_cmdline(cmdline, COMMAND_LINE_SIZE);
+ console_ops.edit_cmdline(cmdline, BOOT_COMMAND_LINE_SIZE);
printf("\n\r");
/* Put the command line back into the devtree for the kernel */
* built-in command line wasn't set by an external tool */
if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0'))
memmove(cmdline, loader_info.cmdline,
- min(loader_info.cmdline_len, COMMAND_LINE_SIZE-1));
+ min(loader_info.cmdline_len, BOOT_COMMAND_LINE_SIZE-1));
if (console_ops.open && (console_ops.open() < 0))
exit();
#include "types.h"
#include "string.h"
-#define COMMAND_LINE_SIZE 512
+#define BOOT_COMMAND_LINE_SIZE 2048
#define MAX_PATH_LEN 256
#define MAX_PROP_LEN 256 /* What should this be? */
* The buffer is put in it's own section so that tools may locate it easier.
*/
-static char cmdline[COMMAND_LINE_SIZE]
+static char cmdline[BOOT_COMMAND_LINE_SIZE]
__attribute__((__section__("__builtin_cmdline")));
static void prep_cmdline(void *chosen)
{
if (cmdline[0] == '\0')
- getprop(chosen, "bootargs", cmdline, COMMAND_LINE_SIZE-1);
+ getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1);
else
setprop_str(chosen, "bootargs", cmdline);
* size except the last one in the list to be as well.
*/
struct opal_sg_entry {
- void *data;
- long length;
+ __be64 data;
+ __be64 length;
};
-/* sg list */
+/* SG list */
struct opal_sg_list {
- unsigned long num_entries;
- struct opal_sg_list *next;
+ __be64 length;
+ __be64 next;
struct opal_sg_entry entry[];
};
int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
uint32_t addr, __be32 *data, uint32_t sz);
-int64_t opal_read_elog(uint64_t buffer, size_t size, uint64_t log_id);
-int64_t opal_get_elog_size(uint64_t *log_id, size_t *size, uint64_t *elog_type);
+int64_t opal_read_elog(uint64_t buffer, uint64_t size, uint64_t log_id);
+int64_t opal_get_elog_size(__be64 *log_id, __be64 *size, __be64 *elog_type);
int64_t opal_write_elog(uint64_t buffer, uint64_t size, uint64_t offset);
int64_t opal_send_ack_elog(uint64_t log_id);
void opal_resend_pending_logs(void);
int64_t opal_manage_flash(uint8_t op);
int64_t opal_update_flash(uint64_t blk_list);
int64_t opal_dump_init(uint8_t dump_type);
-int64_t opal_dump_info(uint32_t *dump_id, uint32_t *dump_size);
-int64_t opal_dump_info2(uint32_t *dump_id, uint32_t *dump_size, uint32_t *dump_type);
+int64_t opal_dump_info(__be32 *dump_id, __be32 *dump_size);
+int64_t opal_dump_info2(__be32 *dump_id, __be32 *dump_size, __be32 *dump_type);
int64_t opal_dump_read(uint32_t dump_id, uint64_t buffer);
int64_t opal_dump_ack(uint32_t dump_id);
int64_t opal_dump_resend_notification(void);
-int64_t opal_get_msg(uint64_t buffer, size_t size);
-int64_t opal_check_completion(uint64_t buffer, size_t size, uint64_t token);
+int64_t opal_get_msg(uint64_t buffer, uint64_t size);
+int64_t opal_check_completion(uint64_t buffer, uint64_t size, uint64_t token);
int64_t opal_sync_host_reboot(void);
int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
- size_t length);
+ uint64_t length);
int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
- size_t length);
+ uint64_t length);
int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
/* Internal functions */
-extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
+extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
+ int depth, void *data);
extern int early_init_dt_scan_recoverable_ranges(unsigned long node,
const char *uname, int depth, void *data);
extern void hvc_opal_init_early(void);
-/* Internal functions */
-extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
- int depth, void *data);
-
extern int opal_notifier_register(struct notifier_block *nb);
extern int opal_notifier_unregister(struct notifier_block *nb);
extern void opal_notifier_disable(void);
extern void opal_notifier_update_evt(uint64_t evt_mask, uint64_t evt_val);
-extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
-extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
-
extern int __opal_async_get_token(void);
extern int opal_async_get_token_interruptible(void);
extern int __opal_async_release_token(int token);
extern int opal_async_wait_response(uint64_t token, struct opal_msg *msg);
extern int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data);
-extern void hvc_opal_init_early(void);
-
struct rtc_time;
extern int opal_set_rtc_time(struct rtc_time *tm);
extern void opal_get_rtc_time(struct rtc_time *tm);
extern void opal_lpc_init(void);
+struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
+ unsigned long vmalloc_size);
+void opal_free_sg_list(struct opal_sg_list *sg);
+
#endif /* __ASSEMBLY__ */
#endif /* __OPAL_H */
-#include <asm-generic/setup.h>
+#ifndef _UAPI_ASM_POWERPC_SETUP_H
+#define _UAPI_ASM_POWERPC_SETUP_H
+
+#define COMMAND_LINE_SIZE 2048
+
+#endif /* _UAPI_ASM_POWERPC_SETUP_H */
EXPORT_SYMBOL(flush_instruction_cache);
#endif
EXPORT_SYMBOL(flush_dcache_range);
+EXPORT_SYMBOL(flush_icache_range);
#ifdef CONFIG_SMP
#ifdef CONFIG_PPC32
if (rtas_token("ibm,update-flash-64-and-reboot") ==
RTAS_UNKNOWN_SERVICE) {
pr_info("rtas_flash: no firmware flash support\n");
- return 1;
+ return -EINVAL;
}
rtas_validate_flash_data.buf = kzalloc(VALIDATE_BUF_SIZE, GFP_KERNEL);
*/
.globl kvm_start_guest
kvm_start_guest:
+
+ /* Set runlatch bit the minute you wake up from nap */
+ mfspr r1, SPRN_CTRLF
+ ori r1, r1, 1
+ mtspr SPRN_CTRLT, r1
+
ld r2,PACATOC(r13)
li r0,KVM_HWTHREAD_IN_KVM
li r0, KVM_HWTHREAD_IN_NAP
stb r0, HSTATE_HWTHREAD_STATE(r13)
kvm_do_nap:
+ /* Clear the runlatch bit before napping */
+ mfspr r2, SPRN_CTRLF
+ clrrdi r2, r2, 1
+ mtspr SPRN_CTRLT, r2
+
li r3, LPCR_PECE0
mfspr r4, SPRN_LPCR
rlwimi r4, r3, 0, LPCR_PECE0 | LPCR_PECE1
/*
* Take a nap until a decrementer or external or doobell interrupt
- * occurs, with PECE1, PECE0 and PECEDP set in LPCR
+ * occurs, with PECE1, PECE0 and PECEDP set in LPCR. Also clear the
+ * runlatch bit before napping.
*/
+ mfspr r2, SPRN_CTRLF
+ clrrdi r2, r2, 1
+ mtspr SPRN_CTRLT, r2
+
li r0,1
stb r0,HSTATE_HWTHREAD_REQ(r13)
mfspr r5,SPRN_LPCR
va &= ~((1ul << mmu_psize_defs[apsize].shift) - 1);
va |= penc << 12;
va |= ssize << 8;
- /* Add AVAL part */
- if (psize != apsize) {
- /*
- * MPSS, 64K base page size and 16MB parge page size
- * We don't need all the bits, but rest of the bits
- * must be ignored by the processor.
- * vpn cover upto 65 bits of va. (0...65) and we need
- * 58..64 bits of va.
- */
- va |= (vpn & 0xfe);
- }
+ /*
+ * AVAL bits:
+ * We don't need all the bits, but rest of the bits
+ * must be ignored by the processor.
+ * vpn cover upto 65 bits of va. (0...65) and we need
+ * 58..64 bits of va.
+ */
+ va |= (vpn & 0xfe); /* AVAL */
va |= 1; /* L */
asm volatile(ASM_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0), %2)
: : "r" (va), "r"(0), "i" (CPU_FTR_ARCH_206)
va &= ~((1ul << mmu_psize_defs[apsize].shift) - 1);
va |= penc << 12;
va |= ssize << 8;
- /* Add AVAL part */
- if (psize != apsize) {
- /*
- * MPSS, 64K base page size and 16MB parge page size
- * We don't need all the bits, but rest of the bits
- * must be ignored by the processor.
- * vpn cover upto 65 bits of va. (0...65) and we need
- * 58..64 bits of va.
- */
- va |= (vpn & 0xfe);
- }
+ /*
+ * AVAL bits:
+ * We don't need all the bits, but rest of the bits
+ * must be ignored by the processor.
+ * vpn cover upto 65 bits of va. (0...65) and we need
+ * 58..64 bits of va.
+ */
+ va |= (vpn & 0xfe);
va |= 1; /* L */
asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)"
: : "r"(va) : "memory");
return copy_len;
}
-static unsigned long h_get_24x7_catalog_page(char page[static 4096],
- u32 version, u32 index)
+static unsigned long h_get_24x7_catalog_page_(unsigned long phys_4096,
+ unsigned long version,
+ unsigned long index)
{
- WARN_ON(!IS_ALIGNED((unsigned long)page, 4096));
+ pr_devel("h_get_24x7_catalog_page(0x%lx, %lu, %lu)",
+ phys_4096,
+ version,
+ index);
+ WARN_ON(!IS_ALIGNED(phys_4096, 4096));
return plpar_hcall_norets(H_GET_24X7_CATALOG_PAGE,
- virt_to_phys(page),
+ phys_4096,
version,
index);
}
+static unsigned long h_get_24x7_catalog_page(char page[],
+ u64 version, u32 index)
+{
+ return h_get_24x7_catalog_page_(virt_to_phys(page),
+ version, index);
+}
+
static ssize_t catalog_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr, char *buf,
loff_t offset, size_t count)
ssize_t ret = 0;
size_t catalog_len = 0, catalog_page_len = 0, page_count = 0;
loff_t page_offset = 0;
- uint32_t catalog_version_num = 0;
+ uint64_t catalog_version_num = 0;
void *page = kmem_cache_alloc(hv_page_cache, GFP_USER);
struct hv_24x7_catalog_page_0 *page_0 = page;
if (!page)
goto e_free;
}
- catalog_version_num = be32_to_cpu(page_0->version);
+ catalog_version_num = be64_to_cpu(page_0->version);
catalog_page_len = be32_to_cpu(page_0->length);
catalog_len = catalog_page_len * 4096;
page, 4096, page_offset * 4096);
e_free:
if (hret)
- pr_err("h_get_24x7_catalog_page(ver=%d, page=%lld) failed: rc=%ld\n",
- catalog_version_num, page_offset, hret);
+ pr_err("h_get_24x7_catalog_page(ver=%lld, page=%lld) failed:"
+ " rc=%ld\n",
+ catalog_version_num, page_offset, hret);
kfree(page);
pr_devel("catalog_read: offset=%lld(%lld) count=%zu(%zu) catalog_len=%zu(%zu) => %zd\n",
static DEVICE_ATTR_RO(_name)
PAGE_0_ATTR(catalog_version, "%lld\n",
- (unsigned long long)be32_to_cpu(page_0->version));
+ (unsigned long long)be64_to_cpu(page_0->version));
PAGE_0_ATTR(catalog_len, "%lld\n",
(unsigned long long)be32_to_cpu(page_0->length) * 4096);
static BIN_ATTR_RO(catalog, 0/* real length varies */);
struct hv_perf_caps caps;
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
- pr_info("not a virtualized system, not enabling\n");
+ pr_debug("not a virtualized system, not enabling\n");
return -ENODEV;
}
hret = hv_perf_caps_get(&caps);
if (hret) {
- pr_info("could not obtain capabilities, error 0x%80lx, not enabling\n",
+ pr_debug("could not obtain capabilities, not enabling, rc=%ld\n",
hret);
return -ENODEV;
}
return sprintf(page, "0x%x\n", COUNTER_INFO_VERSION_CURRENT);
}
-DEVICE_ATTR_RO(kernel_version);
+static DEVICE_ATTR_RO(kernel_version);
HV_CAPS_ATTR(version, "0x%x\n");
HV_CAPS_ATTR(ga, "%d\n");
HV_CAPS_ATTR(expanded, "%d\n");
struct hv_perf_caps caps;
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
- pr_info("not a virtualized system, not enabling\n");
+ pr_debug("not a virtualized system, not enabling\n");
return -ENODEV;
}
hret = hv_perf_caps_get(&caps);
if (hret) {
- pr_info("could not obtain capabilities, error 0x%80lx, not enabling\n",
+ pr_debug("could not obtain capabilities, not enabling, rc=%ld\n",
hret);
return -ENODEV;
}
.default_attrs = dump_default_attrs,
};
-static void free_dump_sg_list(struct opal_sg_list *list)
-{
- struct opal_sg_list *sg1;
- while (list) {
- sg1 = list->next;
- kfree(list);
- list = sg1;
- }
- list = NULL;
-}
-
-static struct opal_sg_list *dump_data_to_sglist(struct dump_obj *dump)
-{
- struct opal_sg_list *sg1, *list = NULL;
- void *addr;
- int64_t size;
-
- addr = dump->buffer;
- size = dump->size;
-
- sg1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!sg1)
- goto nomem;
-
- list = sg1;
- sg1->num_entries = 0;
- while (size > 0) {
- /* Translate virtual address to physical address */
- sg1->entry[sg1->num_entries].data =
- (void *)(vmalloc_to_pfn(addr) << PAGE_SHIFT);
-
- if (size > PAGE_SIZE)
- sg1->entry[sg1->num_entries].length = PAGE_SIZE;
- else
- sg1->entry[sg1->num_entries].length = size;
-
- sg1->num_entries++;
- if (sg1->num_entries >= SG_ENTRIES_PER_NODE) {
- sg1->next = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!sg1->next)
- goto nomem;
-
- sg1 = sg1->next;
- sg1->num_entries = 0;
- }
- addr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- return list;
-
-nomem:
- pr_err("%s : Failed to allocate memory\n", __func__);
- free_dump_sg_list(list);
- return NULL;
-}
-
-static void sglist_to_phy_addr(struct opal_sg_list *list)
-{
- struct opal_sg_list *sg, *next;
-
- for (sg = list; sg; sg = next) {
- next = sg->next;
- /* Don't translate NULL pointer for last entry */
- if (sg->next)
- sg->next = (struct opal_sg_list *)__pa(sg->next);
- else
- sg->next = NULL;
-
- /* Convert num_entries to length */
- sg->num_entries =
- sg->num_entries * sizeof(struct opal_sg_entry) + 16;
- }
-}
-
-static int64_t dump_read_info(uint32_t *id, uint32_t *size, uint32_t *type)
+static int64_t dump_read_info(uint32_t *dump_id, uint32_t *dump_size, uint32_t *dump_type)
{
+ __be32 id, size, type;
int rc;
- *type = 0xffffffff;
- rc = opal_dump_info2(id, size, type);
+ type = cpu_to_be32(0xffffffff);
+ rc = opal_dump_info2(&id, &size, &type);
if (rc == OPAL_PARAMETER)
- rc = opal_dump_info(id, size);
+ rc = opal_dump_info(&id, &size);
+
+ *dump_id = be32_to_cpu(id);
+ *dump_size = be32_to_cpu(size);
+ *dump_type = be32_to_cpu(type);
if (rc)
pr_warn("%s: Failed to get dump info (%d)\n",
}
/* Generate SG list */
- list = dump_data_to_sglist(dump);
+ list = opal_vmalloc_to_sg_list(dump->buffer, dump->size);
if (!list) {
rc = -ENOMEM;
goto out;
}
- /* Translate sg list addr to real address */
- sglist_to_phy_addr(list);
-
/* First entry address */
addr = __pa(list);
__func__, dump->id);
/* Free SG list */
- free_dump_sg_list(list);
+ opal_free_sg_list(list);
out:
return rc;
static void elog_work_fn(struct work_struct *work)
{
- size_t elog_size;
+ __be64 size;
+ __be64 id;
+ __be64 type;
+ uint64_t elog_size;
uint64_t log_id;
uint64_t elog_type;
int rc;
char name[2+16+1];
- rc = opal_get_elog_size(&log_id, &elog_size, &elog_type);
+ rc = opal_get_elog_size(&id, &size, &type);
if (rc != OPAL_SUCCESS) {
pr_err("ELOG: Opal log read failed\n");
return;
}
+ elog_size = be64_to_cpu(size);
+ log_id = be64_to_cpu(id);
+ elog_type = be64_to_cpu(type);
+
BUG_ON(elog_size > OPAL_MAX_ERRLOG_SIZE);
if (elog_size >= OPAL_MAX_ERRLOG_SIZE)
/* XXX: Assume candidate image size is <= 1GB */
#define MAX_IMAGE_SIZE 0x40000000
-/* Flash sg list version */
-#define SG_LIST_VERSION (1UL)
-
/* Image status */
enum {
IMAGE_INVALID,
*/
static inline void opal_flash_validate(void)
{
- struct validate_flash_t *args_buf = &validate_flash_data;
+ long ret;
+ void *buf = validate_flash_data.buf;
+ __be32 size, result;
- args_buf->status = opal_validate_flash(__pa(args_buf->buf),
- &(args_buf->buf_size),
- &(args_buf->result));
+ ret = opal_validate_flash(__pa(buf), &size, &result);
+
+ validate_flash_data.status = ret;
+ validate_flash_data.buf_size = be32_to_cpu(size);
+ validate_flash_data.result = be32_to_cpu(result);
}
/*
return count;
}
-/*
- * Free sg list
- */
-static void free_sg_list(struct opal_sg_list *list)
-{
- struct opal_sg_list *sg1;
- while (list) {
- sg1 = list->next;
- kfree(list);
- list = sg1;
- }
- list = NULL;
-}
-
-/*
- * Build candidate image scatter gather list
- *
- * list format:
- * -----------------------------------
- * | VER (8) | Entry length in bytes |
- * -----------------------------------
- * | Pointer to next entry |
- * -----------------------------------
- * | Address of memory area 1 |
- * -----------------------------------
- * | Length of memory area 1 |
- * -----------------------------------
- * | ......... |
- * -----------------------------------
- * | ......... |
- * -----------------------------------
- * | Address of memory area N |
- * -----------------------------------
- * | Length of memory area N |
- * -----------------------------------
- */
-static struct opal_sg_list *image_data_to_sglist(void)
-{
- struct opal_sg_list *sg1, *list = NULL;
- void *addr;
- int size;
-
- addr = image_data.data;
- size = image_data.size;
-
- sg1 = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!sg1)
- return NULL;
-
- list = sg1;
- sg1->num_entries = 0;
- while (size > 0) {
- /* Translate virtual address to physical address */
- sg1->entry[sg1->num_entries].data =
- (void *)(vmalloc_to_pfn(addr) << PAGE_SHIFT);
-
- if (size > PAGE_SIZE)
- sg1->entry[sg1->num_entries].length = PAGE_SIZE;
- else
- sg1->entry[sg1->num_entries].length = size;
-
- sg1->num_entries++;
- if (sg1->num_entries >= SG_ENTRIES_PER_NODE) {
- sg1->next = kzalloc(PAGE_SIZE, GFP_KERNEL);
- if (!sg1->next) {
- pr_err("%s : Failed to allocate memory\n",
- __func__);
- goto nomem;
- }
-
- sg1 = sg1->next;
- sg1->num_entries = 0;
- }
- addr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
- return list;
-nomem:
- free_sg_list(list);
- return NULL;
-}
-
/*
* OPAL update flash
*/
static int opal_flash_update(int op)
{
- struct opal_sg_list *sg, *list, *next;
+ struct opal_sg_list *list;
unsigned long addr;
int64_t rc = OPAL_PARAMETER;
goto flash;
}
- list = image_data_to_sglist();
+ list = opal_vmalloc_to_sg_list(image_data.data, image_data.size);
if (!list)
goto invalid_img;
/* First entry address */
addr = __pa(list);
- /* Translate sg list address to absolute */
- for (sg = list; sg; sg = next) {
- next = sg->next;
- /* Don't translate NULL pointer for last entry */
- if (sg->next)
- sg->next = (struct opal_sg_list *)__pa(sg->next);
- else
- sg->next = NULL;
-
- /*
- * Convert num_entries to version/length format
- * to satisfy OPAL.
- */
- sg->num_entries = (SG_LIST_VERSION << 56) |
- (sg->num_entries * sizeof(struct opal_sg_entry) + 16);
- }
-
pr_alert("FLASH: Image is %u bytes\n", image_data.size);
pr_alert("FLASH: Image update requested\n");
pr_alert("FLASH: Image will be updated during system reboot\n");
struct kobj_attribute kobj_attr;
};
-static int opal_get_sys_param(u32 param_id, u32 length, void *buffer)
+static ssize_t opal_get_sys_param(u32 param_id, u32 length, void *buffer)
{
struct opal_msg msg;
- int ret, token;
+ ssize_t ret;
+ int token;
token = opal_async_get_token_interruptible();
if (token < 0) {
ret = opal_async_wait_response(token, &msg);
if (ret) {
- pr_err("%s: Failed to wait for the async response, %d\n",
+ pr_err("%s: Failed to wait for the async response, %zd\n",
__func__, ret);
goto out_token;
}
{
struct param_attr *attr = container_of(kobj_attr, struct param_attr,
kobj_attr);
- int ret;
+ ssize_t ret;
mutex_lock(&opal_sysparam_mutex);
ret = opal_get_sys_param(attr->param_id, attr->param_size,
memcpy(buf, param_data_buf, attr->param_size);
+ ret = attr->param_size;
out:
mutex_unlock(&opal_sysparam_mutex);
- return ret ? ret : attr->param_size;
+ return ret;
}
static ssize_t sys_param_store(struct kobject *kobj,
{
struct param_attr *attr = container_of(kobj_attr, struct param_attr,
kobj_attr);
- int ret;
+ ssize_t ret;
+
+ /* MAX_PARAM_DATA_LEN is sizeof(param_data_buf) */
+ if (count > MAX_PARAM_DATA_LEN)
+ count = MAX_PARAM_DATA_LEN;
mutex_lock(&opal_sysparam_mutex);
memcpy(param_data_buf, buf, count);
ret = opal_set_sys_param(attr->param_id, attr->param_size,
param_data_buf);
mutex_unlock(&opal_sysparam_mutex);
- return ret ? ret : count;
+ if (!ret)
+ ret = count;
+ return ret;
}
void __init opal_sys_param_init(void)
}
if (of_property_read_u32_array(sysparam, "param-len", size, count)) {
- pr_err("SYSPARAM: Missing propery param-len in the DT\n");
+ pr_err("SYSPARAM: Missing property param-len in the DT\n");
goto out_free_perm;
}
if (of_property_read_u8_array(sysparam, "param-perm", perm, count)) {
- pr_err("SYSPARAM: Missing propery param-perm in the DT\n");
+ pr_err("SYSPARAM: Missing property param-perm in the DT\n");
goto out_free_perm;
}
/* For each of the parameters, populate the parameter attributes */
for (i = 0; i < count; i++) {
+ if (size[i] > MAX_PARAM_DATA_LEN) {
+ pr_warn("SYSPARAM: Not creating parameter %d as size "
+ "exceeds buffer length\n", i);
+ continue;
+ }
+
sysfs_attr_init(&attr[i].kobj_attr.attr);
attr[i].param_id = id[i];
attr[i].param_size = size[i];
void opal_notifier_enable(void)
{
int64_t rc;
- uint64_t evt = 0;
+ __be64 evt = 0;
atomic_set(&opal_notifier_hold, 0);
/* Process pending events */
rc = opal_poll_events(&evt);
if (rc == OPAL_SUCCESS && evt)
- opal_do_notifier(evt);
+ opal_do_notifier(be64_to_cpu(evt));
}
void opal_notifier_disable(void)
opal_handle_interrupt(virq_to_hw(irq), &events);
- opal_do_notifier(events);
+ opal_do_notifier(be64_to_cpu(events));
return IRQ_HANDLED;
}
/* Export this so that test modules can use it */
EXPORT_SYMBOL_GPL(opal_invalid_call);
+
+/* Convert a region of vmalloc memory to an opal sg list */
+struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
+ unsigned long vmalloc_size)
+{
+ struct opal_sg_list *sg, *first = NULL;
+ unsigned long i = 0;
+
+ sg = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!sg)
+ goto nomem;
+
+ first = sg;
+
+ while (vmalloc_size > 0) {
+ uint64_t data = vmalloc_to_pfn(vmalloc_addr) << PAGE_SHIFT;
+ uint64_t length = min(vmalloc_size, PAGE_SIZE);
+
+ sg->entry[i].data = cpu_to_be64(data);
+ sg->entry[i].length = cpu_to_be64(length);
+ i++;
+
+ if (i >= SG_ENTRIES_PER_NODE) {
+ struct opal_sg_list *next;
+
+ next = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!next)
+ goto nomem;
+
+ sg->length = cpu_to_be64(
+ i * sizeof(struct opal_sg_entry) + 16);
+ i = 0;
+ sg->next = cpu_to_be64(__pa(next));
+ sg = next;
+ }
+
+ vmalloc_addr += length;
+ vmalloc_size -= length;
+ }
+
+ sg->length = cpu_to_be64(i * sizeof(struct opal_sg_entry) + 16);
+
+ return first;
+
+nomem:
+ pr_err("%s : Failed to allocate memory\n", __func__);
+ opal_free_sg_list(first);
+ return NULL;
+}
+
+void opal_free_sg_list(struct opal_sg_list *sg)
+{
+ while (sg) {
+ uint64_t next = be64_to_cpu(sg->next);
+
+ kfree(sg);
+
+ if (next)
+ sg = __va(next);
+ else
+ sg = NULL;
+ }
+}
pci_name(dev));
continue;
}
- pci_dev_get(dev);
pdn->pcidev = dev;
pdn->pe_number = pe->pe_number;
pe->dma_weight += pnv_ioda_dma_weight(dev);
pe = &phb->ioda.pe_array[pdn->pe_number];
WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
- set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table);
+ set_iommu_table_base(&pdev->dev, &pe->tce32_table);
}
static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
}
#ifdef CONFIG_KEXEC
+static void pnv_kexec_wait_secondaries_down(void)
+{
+ int my_cpu, i, notified = -1;
+
+ my_cpu = get_cpu();
+
+ for_each_online_cpu(i) {
+ uint8_t status;
+ int64_t rc;
+
+ if (i == my_cpu)
+ continue;
+
+ for (;;) {
+ rc = opal_query_cpu_status(get_hard_smp_processor_id(i),
+ &status);
+ if (rc != OPAL_SUCCESS || status != OPAL_THREAD_STARTED)
+ break;
+ barrier();
+ if (i != notified) {
+ printk(KERN_INFO "kexec: waiting for cpu %d "
+ "(physical %d) to enter OPAL\n",
+ i, paca[i].hw_cpu_id);
+ notified = i;
+ }
+ }
+ }
+}
+
static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
{
xics_kexec_teardown_cpu(secondary);
- /* Return secondary CPUs to firmware on OPAL v3 */
- if (firmware_has_feature(FW_FEATURE_OPALv3) && secondary) {
+ /* On OPAL v3, we return all CPUs to firmware */
+
+ if (!firmware_has_feature(FW_FEATURE_OPALv3))
+ return;
+
+ if (secondary) {
+ /* Return secondary CPUs to firmware on OPAL v3 */
mb();
get_paca()->kexec_state = KEXEC_STATE_REAL_MODE;
mb();
/* Return the CPU to OPAL */
opal_return_cpu();
+ } else if (crash_shutdown) {
+ /*
+ * On crash, we don't wait for secondaries to go
+ * down as they might be unreachable or hung, so
+ * instead we just wait a bit and move on.
+ */
+ mdelay(1);
+ } else {
+ /* Primary waits for the secondaries to have reached OPAL */
+ pnv_kexec_wait_secondaries_down();
}
}
#endif /* CONFIG_KEXEC */
#include <asm/cputhreads.h>
#include <asm/xics.h>
#include <asm/opal.h>
+#include <asm/runlatch.h>
#include "powernv.h"
*/
mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
while (!generic_check_cpu_restart(cpu)) {
+ ppc64_runlatch_off();
power7_nap();
+ ppc64_runlatch_on();
if (!generic_check_cpu_restart(cpu)) {
DBG("CPU%d Unexpected exit while offline !\n", cpu);
/* We may be getting an IPI, so we re-enable
static void rtas_stop_self(void)
{
- struct rtas_args args = {
- .token = cpu_to_be32(rtas_stop_self_token),
+ static struct rtas_args args = {
.nargs = 0,
.nret = 1,
.rets = &args.args[0],
};
+ args.token = cpu_to_be32(rtas_stop_self_token);
+
local_irq_disable();
BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE);
start_pfn = base >> PAGE_SHIFT;
- if (!pfn_valid(start_pfn)) {
- memblock_remove(base, memblock_size);
- return 0;
- }
+ lock_device_hotplug();
+
+ if (!pfn_valid(start_pfn))
+ goto out;
block_sz = memory_block_size_bytes();
sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
base += MIN_MEMORY_BLOCK_SIZE;
}
+out:
/* Update memory regions for memory remove */
memblock_remove(base, memblock_size);
+ unlock_device_hotplug();
return 0;
}
return 1;
}
-static int apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+static int __init apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
{
u32 val;
/* public: */
unsigned int count;
struct device dev;
- struct ccw_device *cdev[0];
struct work_struct ungroup_work;
+ struct ccw_device *cdev[0];
};
/**
tlb->batch = NULL;
}
-static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
__tlb_flush_mm_lazy(tlb->mm);
+}
+
+static inline void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
tlb_table_flush(tlb);
}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+ tlb_flush_mmu_tlbonly(tlb);
+ tlb_flush_mmu_free(tlb);
+}
+
static inline void tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end)
{
case BPF_S_LD_W_IND:
case BPF_S_LD_H_IND:
case BPF_S_LD_B_IND:
- case BPF_S_LDX_B_MSH:
case BPF_S_LD_IMM:
case BPF_S_LD_MEM:
case BPF_S_MISC_TXA:
}
}
+static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
+{
+}
+
+static inline void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
+}
+
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
}
extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end);
+static inline void
+tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
+{
+ flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end);
+}
+
+static inline void
+tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
+ init_tlb_gather(tlb);
+}
+
static inline void
tlb_flush_mmu(struct mmu_gather *tlb)
{
if (!tlb->need_flush)
return;
- flush_tlb_mm_range(tlb->mm, tlb->start, tlb->end);
- init_tlb_gather(tlb);
+ tlb_flush_mmu_tlbonly(tlb);
+ tlb_flush_mmu_free(tlb);
}
/* tlb_finish_mmu
extern int os_get_ifname(int fd, char *namebuf);
extern int os_set_slip(int fd);
extern int os_mode_fd(int fd, int mode);
+extern int os_fsync_file(int fd);
extern int os_seek_file(int fd, unsigned long long offset);
extern int os_open_file(const char *file, struct openflags flags, int mode);
*/
os_seek_file(physmem_fd, __pa(&__syscall_stub_start));
os_write_file(physmem_fd, &__syscall_stub_start, PAGE_SIZE);
+ os_fsync_file(physmem_fd);
bootmap_size = init_bootmem(pfn, pfn + delta);
free_bootmem(__pa(reserve_end) + bootmap_size,
{
close(fd);
}
+int os_fsync_file(int fd)
+{
+ if (fsync(fd) < 0)
+ return -errno;
+ return 0;
+}
int os_seek_file(int fd, unsigned long long offset)
{
#endif
do_uml_initcalls();
+ change_sig(SIGPIPE, 0);
ret = linux_main(argc, argv);
/*
#include <string.h>
#include <sys/stat.h>
#include <sys/mman.h>
-#include <sys/param.h>
+#include <sys/vfs.h>
+#include <linux/magic.h>
#include <init.h>
#include <os.h>
-/* Modified by which_tmpdir, which is called during early boot */
-static char *default_tmpdir = "/tmp";
-
-/*
- * Modified when creating the physical memory file and when checking
- * the tmp filesystem for usability, both happening during early boot.
- */
+/* Set by make_tempfile() during early boot. */
static char *tempdir = NULL;
-static void __init find_tempdir(void)
+/* Check if dir is on tmpfs. Return 0 if yes, -1 if no or error. */
+static int __init check_tmpfs(const char *dir)
{
- const char *dirs[] = { "TMP", "TEMP", "TMPDIR", NULL };
- int i;
- char *dir = NULL;
-
- if (tempdir != NULL)
- /* We've already been called */
- return;
- for (i = 0; dirs[i]; i++) {
- dir = getenv(dirs[i]);
- if ((dir != NULL) && (*dir != '\0'))
- break;
- }
- if ((dir == NULL) || (*dir == '\0'))
- dir = default_tmpdir;
+ struct statfs st;
- tempdir = malloc(strlen(dir) + 2);
- if (tempdir == NULL) {
- fprintf(stderr, "Failed to malloc tempdir, "
- "errno = %d\n", errno);
- return;
- }
- strcpy(tempdir, dir);
- strcat(tempdir, "/");
-}
-
-/*
- * Remove bytes from the front of the buffer and refill it so that if there's a
- * partial string that we care about, it will be completed, and we can recognize
- * it.
- */
-static int pop(int fd, char *buf, size_t size, size_t npop)
-{
- ssize_t n;
- size_t len = strlen(&buf[npop]);
-
- memmove(buf, &buf[npop], len + 1);
- n = read(fd, &buf[len], size - len - 1);
- if (n < 0)
- return -errno;
-
- buf[len + n] = '\0';
- return 1;
-}
-
-/*
- * This will return 1, with the first character in buf being the
- * character following the next instance of c in the file. This will
- * read the file as needed. If there's an error, -errno is returned;
- * if the end of the file is reached, 0 is returned.
- */
-static int next(int fd, char *buf, size_t size, char c)
-{
- ssize_t n;
- char *ptr;
-
- while ((ptr = strchr(buf, c)) == NULL) {
- n = read(fd, buf, size - 1);
- if (n == 0)
- return 0;
- else if (n < 0)
- return -errno;
-
- buf[n] = '\0';
+ printf("Checking if %s is on tmpfs...", dir);
+ if (statfs(dir, &st) < 0) {
+ printf("%s\n", strerror(errno));
+ } else if (st.f_type != TMPFS_MAGIC) {
+ printf("no\n");
+ } else {
+ printf("OK\n");
+ return 0;
}
-
- return pop(fd, buf, size, ptr - buf + 1);
+ return -1;
}
/*
- * Decode an octal-escaped and space-terminated path of the form used by
- * /proc/mounts. May be used to decode a path in-place. "out" must be at least
- * as large as the input. The output is always null-terminated. "len" gets the
- * length of the output, excluding the trailing null. Returns 0 if a full path
- * was successfully decoded, otherwise an error.
+ * Choose the tempdir to use. We want something on tmpfs so that our memory is
+ * not subject to the host's vm.dirty_ratio. If a tempdir is specified in the
+ * environment, we use that even if it's not on tmpfs, but we warn the user.
+ * Otherwise, we try common tmpfs locations, and if no tmpfs directory is found
+ * then we fall back to /tmp.
*/
-static int decode_path(const char *in, char *out, size_t *len)
+static char * __init choose_tempdir(void)
{
- char *first = out;
- int c;
+ static const char * const vars[] = {
+ "TMPDIR",
+ "TMP",
+ "TEMP",
+ NULL
+ };
+ static const char fallback_dir[] = "/tmp";
+ static const char * const tmpfs_dirs[] = {
+ "/dev/shm",
+ fallback_dir,
+ NULL
+ };
int i;
- int ret = -EINVAL;
- while (1) {
- switch (*in) {
- case '\0':
- goto out;
-
- case ' ':
- ret = 0;
- goto out;
-
- case '\\':
- in++;
- c = 0;
- for (i = 0; i < 3; i++) {
- if (*in < '0' || *in > '7')
- goto out;
- c = (c << 3) | (*in++ - '0');
- }
- *(unsigned char *)out++ = (unsigned char) c;
- break;
-
- default:
- *out++ = *in++;
- break;
+ const char *dir;
+
+ printf("Checking environment variables for a tempdir...");
+ for (i = 0; vars[i]; i++) {
+ dir = getenv(vars[i]);
+ if ((dir != NULL) && (*dir != '\0')) {
+ printf("%s\n", dir);
+ if (check_tmpfs(dir) >= 0)
+ goto done;
+ else
+ goto warn;
}
}
+ printf("none found\n");
-out:
- *out = '\0';
- *len = out - first;
- return ret;
-}
-
-/*
- * Computes the length of s when encoded with three-digit octal escape sequences
- * for the characters in chars.
- */
-static size_t octal_encoded_length(const char *s, const char *chars)
-{
- size_t len = strlen(s);
- while ((s = strpbrk(s, chars)) != NULL) {
- len += 3;
- s++;
- }
-
- return len;
-}
-
-enum {
- OUTCOME_NOTHING_MOUNTED,
- OUTCOME_TMPFS_MOUNT,
- OUTCOME_NON_TMPFS_MOUNT,
-};
-
-/* Read a line of /proc/mounts data looking for a tmpfs mount at "path". */
-static int read_mount(int fd, char *buf, size_t bufsize, const char *path,
- int *outcome)
-{
- int found;
- int match;
- char *space;
- size_t len;
-
- enum {
- MATCH_NONE,
- MATCH_EXACT,
- MATCH_PARENT,
- };
-
- found = next(fd, buf, bufsize, ' ');
- if (found != 1)
- return found;
-
- /*
- * If there's no following space in the buffer, then this path is
- * truncated, so it can't be the one we're looking for.
- */
- space = strchr(buf, ' ');
- if (space) {
- match = MATCH_NONE;
- if (!decode_path(buf, buf, &len)) {
- if (!strcmp(buf, path))
- match = MATCH_EXACT;
- else if (!strncmp(buf, path, len)
- && (path[len] == '/' || !strcmp(buf, "/")))
- match = MATCH_PARENT;
- }
-
- found = pop(fd, buf, bufsize, space - buf + 1);
- if (found != 1)
- return found;
-
- switch (match) {
- case MATCH_EXACT:
- if (!strncmp(buf, "tmpfs", strlen("tmpfs")))
- *outcome = OUTCOME_TMPFS_MOUNT;
- else
- *outcome = OUTCOME_NON_TMPFS_MOUNT;
- break;
-
- case MATCH_PARENT:
- /* This mount obscures any previous ones. */
- *outcome = OUTCOME_NOTHING_MOUNTED;
- break;
- }
+ for (i = 0; tmpfs_dirs[i]; i++) {
+ dir = tmpfs_dirs[i];
+ if (check_tmpfs(dir) >= 0)
+ goto done;
}
- return next(fd, buf, bufsize, '\n');
+ dir = fallback_dir;
+warn:
+ printf("Warning: tempdir %s is not on tmpfs\n", dir);
+done:
+ /* Make a copy since getenv results may not remain valid forever. */
+ return strdup(dir);
}
-/* which_tmpdir is called only during early boot */
-static int checked_tmpdir = 0;
-
/*
- * Look for a tmpfs mounted at /dev/shm. I couldn't find a cleaner
- * way to do this than to parse /proc/mounts. statfs will return the
- * same filesystem magic number and fs id for both /dev and /dev/shm
- * when they are both tmpfs, so you can't tell if they are different
- * filesystems. Also, there seems to be no other way of finding the
- * mount point of a filesystem from within it.
- *
- * If a /dev/shm tmpfs entry is found, then we switch to using it.
- * Otherwise, we stay with the default /tmp.
+ * Create an unlinked tempfile in a suitable tempdir. template must be the
+ * basename part of the template with a leading '/'.
*/
-static void which_tmpdir(void)
+static int __init make_tempfile(const char *template)
{
+ char *tempname;
int fd;
- int found;
- int outcome;
- char *path;
- char *buf;
- size_t bufsize;
- if (checked_tmpdir)
- return;
-
- checked_tmpdir = 1;
-
- printf("Checking for tmpfs mount on /dev/shm...");
-
- path = realpath("/dev/shm", NULL);
- if (!path) {
- printf("failed to check real path, errno = %d\n", errno);
- return;
- }
- printf("%s...", path);
-
- /*
- * The buffer needs to be able to fit the full octal-escaped path, a
- * space, and a trailing null in order to successfully decode it.
- */
- bufsize = octal_encoded_length(path, " \t\n\\") + 2;
-
- if (bufsize < 128)
- bufsize = 128;
-
- buf = malloc(bufsize);
- if (!buf) {
- printf("malloc failed, errno = %d\n", errno);
- goto out;
- }
- buf[0] = '\0';
-
- fd = open("/proc/mounts", O_RDONLY);
- if (fd < 0) {
- printf("failed to open /proc/mounts, errno = %d\n", errno);
- goto out1;
- }
-
- outcome = OUTCOME_NOTHING_MOUNTED;
- while (1) {
- found = read_mount(fd, buf, bufsize, path, &outcome);
- if (found != 1)
- break;
- }
-
- if (found < 0) {
- printf("read returned errno %d\n", -found);
- } else {
- switch (outcome) {
- case OUTCOME_TMPFS_MOUNT:
- printf("OK\n");
- default_tmpdir = "/dev/shm";
- break;
-
- case OUTCOME_NON_TMPFS_MOUNT:
- printf("not tmpfs\n");
- break;
-
- default:
- printf("nothing mounted on /dev/shm\n");
- break;
+ if (tempdir == NULL) {
+ tempdir = choose_tempdir();
+ if (tempdir == NULL) {
+ fprintf(stderr, "Failed to choose tempdir: %s\n",
+ strerror(errno));
+ return -1;
}
}
- close(fd);
-out1:
- free(buf);
-out:
- free(path);
-}
-
-static int __init make_tempfile(const char *template, char **out_tempname,
- int do_unlink)
-{
- char *tempname;
- int fd;
-
- which_tmpdir();
- tempname = malloc(MAXPATHLEN);
+ tempname = malloc(strlen(tempdir) + strlen(template) + 1);
if (tempname == NULL)
return -1;
- find_tempdir();
- if ((tempdir == NULL) || (strlen(tempdir) >= MAXPATHLEN))
- goto out;
-
- if (template[0] != '/')
- strcpy(tempname, tempdir);
- else
- tempname[0] = '\0';
- strncat(tempname, template, MAXPATHLEN-1-strlen(tempname));
+ strcpy(tempname, tempdir);
+ strcat(tempname, template);
fd = mkstemp(tempname);
if (fd < 0) {
fprintf(stderr, "open - cannot create %s: %s\n", tempname,
strerror(errno));
goto out;
}
- if (do_unlink && (unlink(tempname) < 0)) {
+ if (unlink(tempname) < 0) {
perror("unlink");
goto close;
}
- if (out_tempname) {
- *out_tempname = tempname;
- } else
- free(tempname);
+ free(tempname);
return fd;
close:
close(fd);
return -1;
}
-#define TEMPNAME_TEMPLATE "vm_file-XXXXXX"
+#define TEMPNAME_TEMPLATE "/vm_file-XXXXXX"
static int __init create_tmp_file(unsigned long long len)
{
int fd, err;
char zero;
- fd = make_tempfile(TEMPNAME_TEMPLATE, NULL, 1);
+ fd = make_tempfile(TEMPNAME_TEMPLATE);
if (fd < 0)
exit(1);
return fd;
}
-
void __init check_tmpexec(void)
{
void *addr;
addr = mmap(NULL, UM_KERN_PAGE_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0);
- printf("Checking PROT_EXEC mmap in %s...",tempdir);
- fflush(stdout);
+ printf("Checking PROT_EXEC mmap in %s...", tempdir);
if (addr == MAP_FAILED) {
err = errno;
- perror("failed");
+ printf("%s\n", strerror(err));
close(fd);
if (err == EPERM)
- printf("%s must be not mounted noexec\n",tempdir);
+ printf("%s must be not mounted noexec\n", tempdir);
exit(1);
}
printf("OK\n");
KBUILD_CFLAGS += -m64
# Don't autogenerate traditional x87, MMX or SSE instructions
- KBUILD_CFLAGS += -mno-mmx -mno-sse -mno-80387 -mno-fp-ret-in-387
+ KBUILD_CFLAGS += -mno-mmx -mno-sse
+ KBUILD_CFLAGS += $(call cc-option,-mno-80387)
+ KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387)
# Use -mpreferred-stack-boundary=3 if supported.
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3)
return nr_irqs_gsi;
}
+unsigned int arch_dynirq_lower_bound(unsigned int from)
+{
+ return from < nr_irqs_gsi ? nr_irqs_gsi : from;
+}
+
int __init arch_probe_nr_irqs(void)
{
int nr;
if (phys_id < 0)
return -1;
- if (!rdmsrl_safe(MSR_RAPL_POWER_UNIT, &msr_rapl_power_unit_bits))
+ /* protect rdmsrl() to handle virtualization */
+ if (rdmsrl_safe(MSR_RAPL_POWER_UNIT, &msr_rapl_power_unit_bits))
return -1;
pmu = kzalloc_node(sizeof(*pmu), GFP_KERNEL, cpu_to_node(cpu));
#define TOPOLOGY_REGISTER_OFFSET 0x10
+/* Flag below is initialized once during vSMP PCI initialization. */
+static int irq_routing_comply = 1;
+
#if defined CONFIG_PCI && defined CONFIG_PARAVIRT
/*
* Interrupt control on vSMPowered systems:
#ifdef CONFIG_SMP
if (cap & ctl & BIT(8)) {
ctl &= ~BIT(8);
+
+ /* Interrupt routing set to ignore */
+ irq_routing_comply = 0;
+
#ifdef CONFIG_PROC_FS
/* Don't let users change irq affinity via procfs */
no_irq_affinity = 1;
{
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
- apic->vector_allocation_domain = fill_vector_allocation_domain;
+
+ if (!irq_routing_comply)
+ apic->vector_allocation_domain = fill_vector_allocation_domain;
}
void __init vsmp_init(void)
[number##_HIGH] = VMCS12_OFFSET(name)+4
-static const unsigned long shadow_read_only_fields[] = {
+static unsigned long shadow_read_only_fields[] = {
/*
* We do NOT shadow fields that are modified when L0
* traps and emulates any vmx instruction (e.g. VMPTRLD,
GUEST_LINEAR_ADDRESS,
GUEST_PHYSICAL_ADDRESS
};
-static const int max_shadow_read_only_fields =
+static int max_shadow_read_only_fields =
ARRAY_SIZE(shadow_read_only_fields);
-static const unsigned long shadow_read_write_fields[] = {
+static unsigned long shadow_read_write_fields[] = {
GUEST_RIP,
GUEST_RSP,
GUEST_CR0,
HOST_FS_SELECTOR,
HOST_GS_SELECTOR
};
-static const int max_shadow_read_write_fields =
+static int max_shadow_read_write_fields =
ARRAY_SIZE(shadow_read_write_fields);
static const unsigned short vmcs_field_to_offset_table[] = {
}
}
+static void init_vmcs_shadow_fields(void)
+{
+ int i, j;
+
+ /* No checks for read only fields yet */
+
+ for (i = j = 0; i < max_shadow_read_write_fields; i++) {
+ switch (shadow_read_write_fields[i]) {
+ case GUEST_BNDCFGS:
+ if (!vmx_mpx_supported())
+ continue;
+ break;
+ default:
+ break;
+ }
+
+ if (j < i)
+ shadow_read_write_fields[j] =
+ shadow_read_write_fields[i];
+ j++;
+ }
+ max_shadow_read_write_fields = j;
+
+ /* shadowed fields guest access without vmexit */
+ for (i = 0; i < max_shadow_read_write_fields; i++) {
+ clear_bit(shadow_read_write_fields[i],
+ vmx_vmwrite_bitmap);
+ clear_bit(shadow_read_write_fields[i],
+ vmx_vmread_bitmap);
+ }
+ for (i = 0; i < max_shadow_read_only_fields; i++)
+ clear_bit(shadow_read_only_fields[i],
+ vmx_vmread_bitmap);
+}
+
static __init int alloc_kvm_area(void)
{
int cpu;
enable_vpid = 0;
if (!cpu_has_vmx_shadow_vmcs())
enable_shadow_vmcs = 0;
+ if (enable_shadow_vmcs)
+ init_vmcs_shadow_fields();
if (!cpu_has_vmx_ept() ||
!cpu_has_vmx_ept_4levels()) {
memset(vmx_vmread_bitmap, 0xff, PAGE_SIZE);
memset(vmx_vmwrite_bitmap, 0xff, PAGE_SIZE);
- /* shadowed read/write fields */
- for (i = 0; i < max_shadow_read_write_fields; i++) {
- clear_bit(shadow_read_write_fields[i], vmx_vmwrite_bitmap);
- clear_bit(shadow_read_write_fields[i], vmx_vmread_bitmap);
- }
- /* shadowed read only fields */
- for (i = 0; i < max_shadow_read_only_fields; i++)
- clear_bit(shadow_read_only_fields[i], vmx_vmread_bitmap);
/*
* Allow direct access to the PC debug port (it is often used for I/O
#ifdef BUILD_VDSO32
#include <asm/vdso32.h>
- .hpet_sect : {
- hpet_page = . - VDSO_OFFSET(VDSO_HPET_PAGE);
- } :text :hpet_sect
+ hpet_page = . - VDSO_OFFSET(VDSO_HPET_PAGE);
- .vvar_sect : {
- vvar = . - VDSO_OFFSET(VDSO_VVAR_PAGE);
+ vvar = . - VDSO_OFFSET(VDSO_VVAR_PAGE);
/* Place all vvars at the offsets in asm/vvar.h. */
#define EMIT_VVAR(name, offset) vvar_ ## name = vvar + offset;
#include <asm/vvar.h>
#undef __VVAR_KERNEL_LDS
#undef EMIT_VVAR
- } :text :vvar_sect
#endif
. = SIZEOF_HEADERS;
*/
. = ALIGN(0x100);
- .text : { *(.text*) } :text =0x90909090
+ .text : { *(.text*) } :text =0x90909090,
+
+ /*
+ * The comma above works around a bug in gold:
+ * https://sourceware.org/bugzilla/show_bug.cgi?id=16804
+ */
/DISCARD/ : {
*(.discard)
dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
note PT_NOTE FLAGS(4); /* PF_R */
eh_frame_hdr PT_GNU_EH_FRAME;
-#ifdef BUILD_VDSO32
- vvar_sect PT_NULL FLAGS(4); /* PF_R */
- hpet_sect PT_NULL FLAGS(4); /* PF_R */
-#endif
}
acpi_status status;
int ret;
+ if (pr->apic_id == -1)
+ return -ENODEV;
+
status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT))
return -ENODEV;
}
apic_id = acpi_get_apicid(pr->handle, device_declaration, pr->acpi_id);
- if (apic_id < 0) {
+ if (apic_id < 0)
acpi_handle_debug(pr->handle, "failed to get CPU APIC ID.\n");
- return -ENODEV;
- }
pr->apic_id = apic_id;
cpu_index = acpi_map_cpuid(pr->apic_id, pr->acpi_id);
#include "accommon.h"
#include "acdispat.h"
#include "acinterp.h"
+#include "amlcode.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exfield")
+/* Local prototypes */
+static u32
+acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_get_serial_access_bytes
+ *
+ * PARAMETERS: accessor_type - The type of the protocol indicated by region
+ * field access attributes
+ * access_length - The access length of the region field
+ *
+ * RETURN: Decoded access length
+ *
+ * DESCRIPTION: This routine returns the length of the generic_serial_bus
+ * protocol bytes
+ *
+ ******************************************************************************/
+
+static u32
+acpi_ex_get_serial_access_length(u32 accessor_type, u32 access_length)
+{
+ u32 length;
+
+ switch (accessor_type) {
+ case AML_FIELD_ATTRIB_QUICK:
+
+ length = 0;
+ break;
+
+ case AML_FIELD_ATTRIB_SEND_RCV:
+ case AML_FIELD_ATTRIB_BYTE:
+
+ length = 1;
+ break;
+
+ case AML_FIELD_ATTRIB_WORD:
+ case AML_FIELD_ATTRIB_WORD_CALL:
+
+ length = 2;
+ break;
+
+ case AML_FIELD_ATTRIB_MULTIBYTE:
+ case AML_FIELD_ATTRIB_RAW_BYTES:
+ case AML_FIELD_ATTRIB_RAW_PROCESS:
+
+ length = access_length;
+ break;
+
+ case AML_FIELD_ATTRIB_BLOCK:
+ case AML_FIELD_ATTRIB_BLOCK_CALL:
+ default:
+
+ length = ACPI_GSBUS_BUFFER_SIZE;
+ break;
+ }
+
+ return (length);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_ex_read_data_from_field
* Buffer, depending on the size of the field.
*
******************************************************************************/
+
acpi_status
-acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state,
+acpi_ex_read_data_from_field(struct acpi_walk_state * walk_state,
union acpi_operand_object *obj_desc,
union acpi_operand_object **ret_buffer_desc)
{
acpi_size length;
void *buffer;
u32 function;
+ u16 accessor_type;
ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);
ACPI_READ | (obj_desc->field.attribute << 16);
} else if (obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_GSBUS) {
- length = ACPI_GSBUS_BUFFER_SIZE;
- function =
- ACPI_READ | (obj_desc->field.attribute << 16);
+ accessor_type = obj_desc->field.attribute;
+ length = acpi_ex_get_serial_access_length(accessor_type,
+ obj_desc->
+ field.
+ access_length);
+
+ /*
+ * Add additional 2 bytes for modeled generic_serial_bus data buffer:
+ * typedef struct {
+ * BYTEStatus; // Byte 0 of the data buffer
+ * BYTELength; // Byte 1 of the data buffer
+ * BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
+ * }
+ */
+ length += 2;
+ function = ACPI_READ | (accessor_type << 16);
} else { /* IPMI */
length = ACPI_IPMI_BUFFER_SIZE;
void *buffer;
union acpi_operand_object *buffer_desc;
u32 function;
+ u16 accessor_type;
ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);
ACPI_WRITE | (obj_desc->field.attribute << 16);
} else if (obj_desc->field.region_obj->region.space_id ==
ACPI_ADR_SPACE_GSBUS) {
- length = ACPI_GSBUS_BUFFER_SIZE;
- function =
- ACPI_WRITE | (obj_desc->field.attribute << 16);
+ accessor_type = obj_desc->field.attribute;
+ length = acpi_ex_get_serial_access_length(accessor_type,
+ obj_desc->
+ field.
+ access_length);
+
+ /*
+ * Add additional 2 bytes for modeled generic_serial_bus data buffer:
+ * typedef struct {
+ * BYTEStatus; // Byte 0 of the data buffer
+ * BYTELength; // Byte 1 of the data buffer
+ * BYTE[x-1]Data; // Bytes 2-x of the arbitrary length data buffer,
+ * }
+ */
+ length += 2;
+ function = ACPI_WRITE | (accessor_type << 16);
} else { /* IPMI */
length = ACPI_IPMI_BUFFER_SIZE;
break;
default:
- acpi_handle_warn(handle, "Unsupported event type 0x%x\n", type);
- ost_code = ACPI_OST_SC_UNRECOGNIZED_NOTIFY;
- goto err;
+ acpi_handle_debug(handle, "Unknown event type 0x%x\n", type);
+ break;
}
adev = acpi_bus_get_acpi_device(handle);
spin_unlock_irqrestore(&ec->lock, flags);
}
-static int acpi_ec_sync_query(struct acpi_ec *ec);
+static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data);
static int ec_check_sci_sync(struct acpi_ec *ec, u8 state)
{
if (state & ACPI_EC_FLAG_SCI) {
if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
- return acpi_ec_sync_query(ec);
+ return acpi_ec_sync_query(ec, NULL);
}
return 0;
}
EXPORT_SYMBOL(ec_get_handle);
-static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 *data);
-
/*
- * Clears stale _Q events that might have accumulated in the EC.
+ * Process _Q events that might have accumulated in the EC.
* Run with locked ec mutex.
*/
static void acpi_ec_clear(struct acpi_ec *ec)
u8 value = 0;
for (i = 0; i < ACPI_EC_CLEAR_MAX; i++) {
- status = acpi_ec_query_unlocked(ec, &value);
+ status = acpi_ec_sync_query(ec, &value);
if (status || !value)
break;
}
kfree(handler);
}
-static int acpi_ec_sync_query(struct acpi_ec *ec)
+static int acpi_ec_sync_query(struct acpi_ec *ec, u8 *data)
{
u8 value = 0;
int status;
struct acpi_ec_query_handler *handler, *copy;
- if ((status = acpi_ec_query_unlocked(ec, &value)))
+
+ status = acpi_ec_query_unlocked(ec, &value);
+ if (data)
+ *data = value;
+ if (status)
return status;
+
list_for_each_entry(handler, &ec->list, node) {
if (value == handler->query_bit) {
/* have custom handler for this bit */
if (!ec)
return;
mutex_lock(&ec->mutex);
- acpi_ec_sync_query(ec);
+ acpi_ec_sync_query(ec, NULL);
mutex_unlock(&ec->mutex);
}
config AHCI_IMX
tristate "Freescale i.MX AHCI SATA support"
- depends on MFD_SYSCON
+ depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
config AHCI_XGENE
tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
- depends on ARM64 || COMPILE_TEST
- select PHY_XGENE
+ depends on PHY_XGENE
help
This option enables support for APM X-Gene SoC SATA host controller.
#endif
static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
- struct ahci_host_priv *hpriv)
+ struct ahci_host_priv *hpriv)
{
- int nvec;
+ int rc, nvec;
if (hpriv->flags & AHCI_HFLAG_NO_MSI)
goto intx;
if (nvec < n_ports)
goto single_msi;
- nvec = pci_enable_msi_range(pdev, nvec, nvec);
- if (nvec == -ENOSPC)
+ rc = pci_enable_msi_exact(pdev, nvec);
+ if (rc == -ENOSPC)
goto single_msi;
- else if (nvec < 0)
+ else if (rc < 0)
goto intx;
+ /* fallback to single MSI mode if the controller enforced MRSM mode */
+ if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) {
+ pci_disable_msi(pdev);
+ printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n");
+ goto single_msi;
+ }
+
return nvec;
single_msi:
return rc;
for (i = 0; i < host->n_ports; i++) {
- const char* desc;
struct ahci_port_priv *pp = host->ports[i]->private_data;
- /* pp is NULL for dummy ports */
- if (pp)
- desc = pp->irq_desc;
- else
- desc = dev_driver_string(host->dev);
+ /* Do not receive interrupts sent by dummy ports */
+ if (!pp) {
+ disable_irq(irq + i);
+ continue;
+ }
- rc = devm_request_threaded_irq(host->dev,
- irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED,
- desc, host->ports[i]);
+ rc = devm_request_threaded_irq(host->dev, irq + i,
+ ahci_hw_interrupt,
+ ahci_thread_fn, IRQF_SHARED,
+ pp->irq_desc, host->ports[i]);
if (rc)
goto out_free_irqs;
}
/* HOST_CTL bits */
HOST_RESET = (1 << 0), /* reset controller; self-clear */
HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
+ HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
/* HOST_CAP bits */
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
/* devices that don't properly handle queued TRIM commands */
- { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
- { "Crucial_CT???M500SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Micron_M500*", "MU0[1-4]*", ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Crucial_CT???M500SSD*", "MU0[1-4]*", ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Micron_M550*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
+ { "Crucial_CT???M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, },
/*
* Some WD SATA-I drives spin up and down erratically when the link
static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
{
struct ata_queued_cmd *qc = NULL;
- unsigned int i;
+ unsigned int i, tag;
/* no command while frozen */
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
- /* the last tag is reserved for internal command. */
- for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
- if (!test_and_set_bit(i, &ap->qc_allocated)) {
- qc = __ata_qc_from_tag(ap, i);
+ for (i = 0; i < ATA_MAX_QUEUE; i++) {
+ tag = (i + ap->last_tag + 1) % ATA_MAX_QUEUE;
+
+ /* the last tag is reserved for internal command. */
+ if (tag == ATA_TAG_INTERNAL)
+ continue;
+
+ if (!test_and_set_bit(tag, &ap->qc_allocated)) {
+ qc = __ata_qc_from_tag(ap, tag);
+ qc->tag = tag;
+ ap->last_tag = tag;
break;
}
-
- if (qc)
- qc->tag = i;
+ }
return qc;
}
cf_card_detect(acdev, 0);
- return ata_host_activate(host, acdev->irq, irq_handler, 0,
- &arasan_cf_sht);
+ ret = ata_host_activate(host, acdev->irq, irq_handler, 0,
+ &arasan_cf_sht);
+ if (!ret)
+ return 0;
+ cf_exit(acdev);
free_clk:
clk_put(acdev->clk);
return ret;
host->private_data = info;
- return ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
- gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
- irq_flags, &pata_at91_sht);
+ ret = ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
+ gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
+ irq_flags, &pata_at91_sht);
+ if (ret)
+ goto err_put;
- if (!ret)
- return 0;
+ return 0;
err_put:
clk_put(info->mck);
platform_set_drvdata(pdev, host);
- return ata_host_activate(host, info->irq,
- info->irq ? pata_s3c_irq : NULL,
- 0, &pata_s3c_sht);
+ ret = ata_host_activate(host, info->irq,
+ info->irq ? pata_s3c_irq : NULL,
+ 0, &pata_s3c_sht);
+ if (ret)
+ goto stop_clk;
+
+ return 0;
stop_clk:
clk_disable(info->clk);
static LIST_HEAD(deferred_probe_pending_list);
static LIST_HEAD(deferred_probe_active_list);
static struct workqueue_struct *deferred_wq;
+static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
/**
* deferred_probe_work_func() - Retry probing devices in the active list.
* This functions moves all devices from the pending list to the active
* list and schedules the deferred probe workqueue to process them. It
* should be called anytime a driver is successfully bound to a device.
+ *
+ * Note, there is a race condition in multi-threaded probe. In the case where
+ * more than one device is probing at the same time, it is possible for one
+ * probe to complete successfully while another is about to defer. If the second
+ * depends on the first, then it will get put on the pending list after the
+ * trigger event has already occured and will be stuck there.
+ *
+ * The atomic 'deferred_trigger_count' is used to determine if a successful
+ * trigger has occurred in the midst of probing a driver. If the trigger count
+ * changes in the midst of a probe, then deferred processing should be triggered
+ * again.
*/
static void driver_deferred_probe_trigger(void)
{
* into the active list so they can be retried by the workqueue
*/
mutex_lock(&deferred_probe_mutex);
+ atomic_inc(&deferred_trigger_count);
list_splice_tail_init(&deferred_probe_pending_list,
&deferred_probe_active_list);
mutex_unlock(&deferred_probe_mutex);
static int really_probe(struct device *dev, struct device_driver *drv)
{
int ret = 0;
+ int local_trigger_count = atomic_read(&deferred_trigger_count);
atomic_inc(&probe_count);
pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
/* Driver requested deferred probing */
dev_info(dev, "Driver %s requests probe deferral\n", drv->name);
driver_deferred_probe_add(dev);
+ /* Did a trigger occur while probing? Need to re-trigger if yes */
+ if (local_trigger_count != atomic_read(&deferred_trigger_count))
+ driver_deferred_probe_trigger();
} else if (ret != -ENODEV && ret != -ENXIO) {
/* driver matched but the probe failed */
printk(KERN_WARNING
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
+#include <linux/of_irq.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
return -ENXIO;
return dev->archdata.irqs[num];
#else
- struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);
+ struct resource *r;
+ if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node)
+ return of_irq_get(dev->dev.of_node, num);
+
+ r = platform_get_resource(dev, IORESOURCE_IRQ, num);
return r ? r->start : -ENXIO;
#endif
phys_addr_t sdramwins_phys_base,
size_t sdramwins_size)
{
- struct device_node *np;
int win;
mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
return -ENOMEM;
}
- np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
- if (np) {
- mbus->hw_io_coherency = 1;
- of_node_put(np);
- }
-
for (win = 0; win < mbus->soc->num_wins; win++)
mvebu_mbus_disable_window(mbus, win);
}
}
-int __init mvebu_mbus_dt_init(void)
+int __init mvebu_mbus_dt_init(bool is_coherent)
{
struct resource mbuswins_res, sdramwins_res;
struct device_node *np, *controller;
return -EINVAL;
}
+ mbus_state.hw_io_coherency = is_coherent;
+
/* Get optional pcie-{mem,io}-aperture properties */
mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture,
&mbus_state.pcie_io_aperture);
# Makefile for at91 specific clk
#
-obj-y += pmc.o
-obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
+obj-y += pmc.o sckc.o
+obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
obj-y += clk-system.o clk-peripheral.o clk-programmable.o
obj-$(CONFIG_HAVE_AT91_UTMI) += clk-utmi.o
#define MAINF_LOOP_MIN_WAIT (USEC_PER_SEC / SLOW_CLOCK_FREQ)
#define MAINF_LOOP_MAX_WAIT MAINFRDY_TIMEOUT
-struct clk_main {
+#define MOR_KEY_MASK (0xff << 16)
+
+struct clk_main_osc {
struct clk_hw hw;
struct at91_pmc *pmc;
- unsigned long rate;
unsigned int irq;
wait_queue_head_t wait;
};
-#define to_clk_main(hw) container_of(hw, struct clk_main, hw)
+#define to_clk_main_osc(hw) container_of(hw, struct clk_main_osc, hw)
+
+struct clk_main_rc_osc {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ unsigned long frequency;
+ unsigned long accuracy;
+};
+
+#define to_clk_main_rc_osc(hw) container_of(hw, struct clk_main_rc_osc, hw)
+
+struct clk_rm9200_main {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+#define to_clk_rm9200_main(hw) container_of(hw, struct clk_rm9200_main, hw)
-static irqreturn_t clk_main_irq_handler(int irq, void *dev_id)
+struct clk_sam9x5_main {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ u8 parent;
+};
+
+#define to_clk_sam9x5_main(hw) container_of(hw, struct clk_sam9x5_main, hw)
+
+static irqreturn_t clk_main_osc_irq_handler(int irq, void *dev_id)
{
- struct clk_main *clkmain = (struct clk_main *)dev_id;
+ struct clk_main_osc *osc = dev_id;
- wake_up(&clkmain->wait);
- disable_irq_nosync(clkmain->irq);
+ wake_up(&osc->wait);
+ disable_irq_nosync(osc->irq);
return IRQ_HANDLED;
}
-static int clk_main_prepare(struct clk_hw *hw)
+static int clk_main_osc_prepare(struct clk_hw *hw)
{
- struct clk_main *clkmain = to_clk_main(hw);
- struct at91_pmc *pmc = clkmain->pmc;
- unsigned long halt_time, timeout;
+ struct clk_main_osc *osc = to_clk_main_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
u32 tmp;
+ tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK;
+ if (tmp & AT91_PMC_OSCBYPASS)
+ return 0;
+
+ if (!(tmp & AT91_PMC_MOSCEN)) {
+ tmp |= AT91_PMC_MOSCEN | AT91_PMC_KEY;
+ pmc_write(pmc, AT91_CKGR_MOR, tmp);
+ }
+
while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS)) {
- enable_irq(clkmain->irq);
- wait_event(clkmain->wait,
+ enable_irq(osc->irq);
+ wait_event(osc->wait,
pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
}
- if (clkmain->rate)
- return 0;
+ return 0;
+}
+
+static void clk_main_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_main_osc *osc = to_clk_main_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp = pmc_read(pmc, AT91_CKGR_MOR);
+
+ if (tmp & AT91_PMC_OSCBYPASS)
+ return;
+
+ if (!(tmp & AT91_PMC_MOSCEN))
+ return;
+
+ tmp &= ~(AT91_PMC_KEY | AT91_PMC_MOSCEN);
+ pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_KEY);
+}
+
+static int clk_main_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_main_osc *osc = to_clk_main_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp = pmc_read(pmc, AT91_CKGR_MOR);
+
+ if (tmp & AT91_PMC_OSCBYPASS)
+ return 1;
+
+ return !!((pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS) &&
+ (pmc_read(pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCEN));
+}
+
+static const struct clk_ops main_osc_ops = {
+ .prepare = clk_main_osc_prepare,
+ .unprepare = clk_main_osc_unprepare,
+ .is_prepared = clk_main_osc_is_prepared,
+};
+
+static struct clk * __init
+at91_clk_register_main_osc(struct at91_pmc *pmc,
+ unsigned int irq,
+ const char *name,
+ const char *parent_name,
+ bool bypass)
+{
+ int ret;
+ struct clk_main_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !irq || !name || !parent_name)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &main_osc_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->pmc = pmc;
+ osc->irq = irq;
+
+ init_waitqueue_head(&osc->wait);
+ irq_set_status_flags(osc->irq, IRQ_NOAUTOEN);
+ ret = request_irq(osc->irq, clk_main_osc_irq_handler,
+ IRQF_TRIGGER_HIGH, name, osc);
+ if (ret)
+ return ERR_PTR(ret);
+
+ if (bypass)
+ pmc_write(pmc, AT91_CKGR_MOR,
+ (pmc_read(pmc, AT91_CKGR_MOR) &
+ ~(MOR_KEY_MASK | AT91_PMC_MOSCEN)) |
+ AT91_PMC_OSCBYPASS | AT91_PMC_KEY);
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk)) {
+ free_irq(irq, osc);
+ kfree(osc);
+ }
+
+ return clk;
+}
+
+void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ unsigned int irq;
+ const char *name = np->name;
+ const char *parent_name;
+ bool bypass;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_main_osc(pmc, irq, name, parent_name, bypass);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static irqreturn_t clk_main_rc_osc_irq_handler(int irq, void *dev_id)
+{
+ struct clk_main_rc_osc *osc = dev_id;
+
+ wake_up(&osc->wait);
+ disable_irq_nosync(osc->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_main_rc_osc_prepare(struct clk_hw *hw)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp;
+
+ tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK;
+
+ if (!(tmp & AT91_PMC_MOSCRCEN)) {
+ tmp |= AT91_PMC_MOSCRCEN | AT91_PMC_KEY;
+ pmc_write(pmc, AT91_CKGR_MOR, tmp);
+ }
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS)) {
+ enable_irq(osc->irq);
+ wait_event(osc->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS);
+ }
+
+ return 0;
+}
+
+static void clk_main_rc_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+ u32 tmp = pmc_read(pmc, AT91_CKGR_MOR);
+
+ if (!(tmp & AT91_PMC_MOSCRCEN))
+ return;
+
+ tmp &= ~(MOR_KEY_MASK | AT91_PMC_MOSCRCEN);
+ pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_KEY);
+}
+
+static int clk_main_rc_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+ struct at91_pmc *pmc = osc->pmc;
+
+ return !!((pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS) &&
+ (pmc_read(pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCRCEN));
+}
+
+static unsigned long clk_main_rc_osc_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+
+ return osc->frequency;
+}
+
+static unsigned long clk_main_rc_osc_recalc_accuracy(struct clk_hw *hw,
+ unsigned long parent_acc)
+{
+ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
+
+ return osc->accuracy;
+}
+
+static const struct clk_ops main_rc_osc_ops = {
+ .prepare = clk_main_rc_osc_prepare,
+ .unprepare = clk_main_rc_osc_unprepare,
+ .is_prepared = clk_main_rc_osc_is_prepared,
+ .recalc_rate = clk_main_rc_osc_recalc_rate,
+ .recalc_accuracy = clk_main_rc_osc_recalc_accuracy,
+};
+
+static struct clk * __init
+at91_clk_register_main_rc_osc(struct at91_pmc *pmc,
+ unsigned int irq,
+ const char *name,
+ u32 frequency, u32 accuracy)
+{
+ int ret;
+ struct clk_main_rc_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !irq || !name || !frequency)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &main_rc_osc_ops;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ init.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->pmc = pmc;
+ osc->irq = irq;
+ osc->frequency = frequency;
+ osc->accuracy = accuracy;
+
+ init_waitqueue_head(&osc->wait);
+ irq_set_status_flags(osc->irq, IRQ_NOAUTOEN);
+ ret = request_irq(osc->irq, clk_main_rc_osc_irq_handler,
+ IRQF_TRIGGER_HIGH, name, osc);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk)) {
+ free_irq(irq, osc);
+ kfree(osc);
+ }
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ unsigned int irq;
+ u32 frequency = 0;
+ u32 accuracy = 0;
+ const char *name = np->name;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "clock-frequency", &frequency);
+ of_property_read_u32(np, "clock-accuracy", &accuracy);
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_main_rc_osc(pmc, irq, name, frequency,
+ accuracy);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+
+static int clk_main_probe_frequency(struct at91_pmc *pmc)
+{
+ unsigned long prep_time, timeout;
+ u32 tmp;
timeout = jiffies + usecs_to_jiffies(MAINFRDY_TIMEOUT);
do {
- halt_time = jiffies;
+ prep_time = jiffies;
tmp = pmc_read(pmc, AT91_CKGR_MCFR);
if (tmp & AT91_PMC_MAINRDY)
return 0;
usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
- } while (time_before(halt_time, timeout));
+ } while (time_before(prep_time, timeout));
- return 0;
+ return -ETIMEDOUT;
}
-static int clk_main_is_prepared(struct clk_hw *hw)
+static unsigned long clk_main_recalc_rate(struct at91_pmc *pmc,
+ unsigned long parent_rate)
{
- struct clk_main *clkmain = to_clk_main(hw);
+ u32 tmp;
+
+ if (parent_rate)
+ return parent_rate;
+
+ tmp = pmc_read(pmc, AT91_CKGR_MCFR);
+ if (!(tmp & AT91_PMC_MAINRDY))
+ return 0;
- return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
+ return ((tmp & AT91_PMC_MAINF) * SLOW_CLOCK_FREQ) / MAINF_DIV;
}
-static unsigned long clk_main_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static int clk_rm9200_main_prepare(struct clk_hw *hw)
{
- u32 tmp;
- struct clk_main *clkmain = to_clk_main(hw);
+ struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw);
+
+ return clk_main_probe_frequency(clkmain->pmc);
+}
+
+static int clk_rm9200_main_is_prepared(struct clk_hw *hw)
+{
+ struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw);
+
+ return !!(pmc_read(clkmain->pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINRDY);
+}
+
+static unsigned long clk_rm9200_main_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw);
+
+ return clk_main_recalc_rate(clkmain->pmc, parent_rate);
+}
+
+static const struct clk_ops rm9200_main_ops = {
+ .prepare = clk_rm9200_main_prepare,
+ .is_prepared = clk_rm9200_main_is_prepared,
+ .recalc_rate = clk_rm9200_main_recalc_rate,
+};
+
+static struct clk * __init
+at91_clk_register_rm9200_main(struct at91_pmc *pmc,
+ const char *name,
+ const char *parent_name)
+{
+ struct clk_rm9200_main *clkmain;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !name)
+ return ERR_PTR(-EINVAL);
+
+ if (!parent_name)
+ return ERR_PTR(-EINVAL);
+
+ clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL);
+ if (!clkmain)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &rm9200_main_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+
+ clkmain->hw.init = &init;
+ clkmain->pmc = pmc;
+
+ clk = clk_register(NULL, &clkmain->hw);
+ if (IS_ERR(clk))
+ kfree(clkmain);
+
+ return clk;
+}
+
+void __init of_at91rm9200_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_rm9200_main(pmc, name, parent_name);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static irqreturn_t clk_sam9x5_main_irq_handler(int irq, void *dev_id)
+{
+ struct clk_sam9x5_main *clkmain = dev_id;
+
+ wake_up(&clkmain->wait);
+ disable_irq_nosync(clkmain->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_sam9x5_main_prepare(struct clk_hw *hw)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
struct at91_pmc *pmc = clkmain->pmc;
- if (clkmain->rate)
- return clkmain->rate;
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS)) {
+ enable_irq(clkmain->irq);
+ wait_event(clkmain->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS);
+ }
+
+ return clk_main_probe_frequency(pmc);
+}
- tmp = pmc_read(pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINF;
- clkmain->rate = (tmp * parent_rate) / MAINF_DIV;
+static int clk_sam9x5_main_is_prepared(struct clk_hw *hw)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
- return clkmain->rate;
+ return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS);
}
-static const struct clk_ops main_ops = {
- .prepare = clk_main_prepare,
- .is_prepared = clk_main_is_prepared,
- .recalc_rate = clk_main_recalc_rate,
+static unsigned long clk_sam9x5_main_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
+
+ return clk_main_recalc_rate(clkmain->pmc, parent_rate);
+}
+
+static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
+ struct at91_pmc *pmc = clkmain->pmc;
+ u32 tmp;
+
+ if (index > 1)
+ return -EINVAL;
+
+ tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK;
+
+ if (index && !(tmp & AT91_PMC_MOSCSEL))
+ pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL);
+ else if (!index && (tmp & AT91_PMC_MOSCSEL))
+ pmc_write(pmc, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL);
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS)) {
+ enable_irq(clkmain->irq);
+ wait_event(clkmain->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS);
+ }
+
+ return 0;
+}
+
+static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
+{
+ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
+
+ return !!(pmc_read(clkmain->pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCEN);
+}
+
+static const struct clk_ops sam9x5_main_ops = {
+ .prepare = clk_sam9x5_main_prepare,
+ .is_prepared = clk_sam9x5_main_is_prepared,
+ .recalc_rate = clk_sam9x5_main_recalc_rate,
+ .set_parent = clk_sam9x5_main_set_parent,
+ .get_parent = clk_sam9x5_main_get_parent,
};
static struct clk * __init
-at91_clk_register_main(struct at91_pmc *pmc,
- unsigned int irq,
- const char *name,
- const char *parent_name,
- unsigned long rate)
+at91_clk_register_sam9x5_main(struct at91_pmc *pmc,
+ unsigned int irq,
+ const char *name,
+ const char **parent_names,
+ int num_parents)
{
int ret;
- struct clk_main *clkmain;
+ struct clk_sam9x5_main *clkmain;
struct clk *clk = NULL;
struct clk_init_data init;
if (!pmc || !irq || !name)
return ERR_PTR(-EINVAL);
- if (!rate && !parent_name)
+ if (!parent_names || !num_parents)
return ERR_PTR(-EINVAL);
clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL);
return ERR_PTR(-ENOMEM);
init.name = name;
- init.ops = &main_ops;
- init.parent_names = parent_name ? &parent_name : NULL;
- init.num_parents = parent_name ? 1 : 0;
- init.flags = parent_name ? 0 : CLK_IS_ROOT;
+ init.ops = &sam9x5_main_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = CLK_SET_PARENT_GATE;
clkmain->hw.init = &init;
- clkmain->rate = rate;
clkmain->pmc = pmc;
clkmain->irq = irq;
+ clkmain->parent = !!(pmc_read(clkmain->pmc, AT91_CKGR_MOR) &
+ AT91_PMC_MOSCEN);
init_waitqueue_head(&clkmain->wait);
irq_set_status_flags(clkmain->irq, IRQ_NOAUTOEN);
- ret = request_irq(clkmain->irq, clk_main_irq_handler,
- IRQF_TRIGGER_HIGH, "clk-main", clkmain);
+ ret = request_irq(clkmain->irq, clk_sam9x5_main_irq_handler,
+ IRQF_TRIGGER_HIGH, name, clkmain);
if (ret)
return ERR_PTR(ret);
return clk;
}
-
-
-static void __init
-of_at91_clk_main_setup(struct device_node *np, struct at91_pmc *pmc)
+void __init of_at91sam9x5_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc)
{
struct clk *clk;
+ const char *parent_names[2];
+ int num_parents;
unsigned int irq;
- const char *parent_name;
const char *name = np->name;
- u32 rate = 0;
+ int i;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > 2)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
- parent_name = of_clk_get_parent_name(np, 0);
of_property_read_string(np, "clock-output-names", &name);
- of_property_read_u32(np, "clock-frequency", &rate);
+
irq = irq_of_parse_and_map(np, 0);
if (!irq)
return;
- clk = at91_clk_register_main(pmc, irq, name, parent_name, rate);
+ clk = at91_clk_register_sam9x5_main(pmc, irq, name, parent_names,
+ num_parents);
if (IS_ERR(clk))
return;
of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
-
-void __init of_at91rm9200_clk_main_setup(struct device_node *np,
- struct at91_pmc *pmc)
-{
- of_at91_clk_main_setup(np, pmc);
-}
--- /dev/null
+/*
+ * drivers/clk/at91/clk-slow.c
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "pmc.h"
+#include "sckc.h"
+
+#define SLOW_CLOCK_FREQ 32768
+#define SLOWCK_SW_CYCLES 5
+#define SLOWCK_SW_TIME_USEC ((SLOWCK_SW_CYCLES * USEC_PER_SEC) / \
+ SLOW_CLOCK_FREQ)
+
+#define AT91_SCKC_CR 0x00
+#define AT91_SCKC_RCEN (1 << 0)
+#define AT91_SCKC_OSC32EN (1 << 1)
+#define AT91_SCKC_OSC32BYP (1 << 2)
+#define AT91_SCKC_OSCSEL (1 << 3)
+
+struct clk_slow_osc {
+ struct clk_hw hw;
+ void __iomem *sckcr;
+ unsigned long startup_usec;
+};
+
+#define to_clk_slow_osc(hw) container_of(hw, struct clk_slow_osc, hw)
+
+struct clk_slow_rc_osc {
+ struct clk_hw hw;
+ void __iomem *sckcr;
+ unsigned long frequency;
+ unsigned long accuracy;
+ unsigned long startup_usec;
+};
+
+#define to_clk_slow_rc_osc(hw) container_of(hw, struct clk_slow_rc_osc, hw)
+
+struct clk_sam9260_slow {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+#define to_clk_sam9260_slow(hw) container_of(hw, struct clk_sam9260_slow, hw)
+
+struct clk_sam9x5_slow {
+ struct clk_hw hw;
+ void __iomem *sckcr;
+ u8 parent;
+};
+
+#define to_clk_sam9x5_slow(hw) container_of(hw, struct clk_sam9x5_slow, hw)
+
+
+static int clk_slow_osc_prepare(struct clk_hw *hw)
+{
+ struct clk_slow_osc *osc = to_clk_slow_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+ u32 tmp = readl(sckcr);
+
+ if (tmp & AT91_SCKC_OSC32BYP)
+ return 0;
+
+ writel(tmp | AT91_SCKC_OSC32EN, sckcr);
+
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);
+
+ return 0;
+}
+
+static void clk_slow_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_slow_osc *osc = to_clk_slow_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+ u32 tmp = readl(sckcr);
+
+ if (tmp & AT91_SCKC_OSC32BYP)
+ return;
+
+ writel(tmp & ~AT91_SCKC_OSC32EN, sckcr);
+}
+
+static int clk_slow_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_slow_osc *osc = to_clk_slow_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+ u32 tmp = readl(sckcr);
+
+ if (tmp & AT91_SCKC_OSC32BYP)
+ return 1;
+
+ return !!(tmp & AT91_SCKC_OSC32EN);
+}
+
+static const struct clk_ops slow_osc_ops = {
+ .prepare = clk_slow_osc_prepare,
+ .unprepare = clk_slow_osc_unprepare,
+ .is_prepared = clk_slow_osc_is_prepared,
+};
+
+static struct clk * __init
+at91_clk_register_slow_osc(void __iomem *sckcr,
+ const char *name,
+ const char *parent_name,
+ unsigned long startup,
+ bool bypass)
+{
+ struct clk_slow_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!sckcr || !name || !parent_name)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &slow_osc_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->sckcr = sckcr;
+ osc->startup_usec = startup;
+
+ if (bypass)
+ writel((readl(sckcr) & ~AT91_SCKC_OSC32EN) | AT91_SCKC_OSC32BYP,
+ sckcr);
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk))
+ kfree(osc);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_slow_osc_setup(struct device_node *np,
+ void __iomem *sckcr)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+ u32 startup;
+ bool bypass;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "atmel,startup-time-usec", &startup);
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ clk = at91_clk_register_slow_osc(sckcr, name, parent_name, startup,
+ bypass);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static unsigned long clk_slow_rc_osc_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+
+ return osc->frequency;
+}
+
+static unsigned long clk_slow_rc_osc_recalc_accuracy(struct clk_hw *hw,
+ unsigned long parent_acc)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+
+ return osc->accuracy;
+}
+
+static int clk_slow_rc_osc_prepare(struct clk_hw *hw)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+
+ writel(readl(sckcr) | AT91_SCKC_RCEN, sckcr);
+
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);
+
+ return 0;
+}
+
+static void clk_slow_rc_osc_unprepare(struct clk_hw *hw)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+ void __iomem *sckcr = osc->sckcr;
+
+ writel(readl(sckcr) & ~AT91_SCKC_RCEN, sckcr);
+}
+
+static int clk_slow_rc_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw);
+
+ return !!(readl(osc->sckcr) & AT91_SCKC_RCEN);
+}
+
+static const struct clk_ops slow_rc_osc_ops = {
+ .prepare = clk_slow_rc_osc_prepare,
+ .unprepare = clk_slow_rc_osc_unprepare,
+ .is_prepared = clk_slow_rc_osc_is_prepared,
+ .recalc_rate = clk_slow_rc_osc_recalc_rate,
+ .recalc_accuracy = clk_slow_rc_osc_recalc_accuracy,
+};
+
+static struct clk * __init
+at91_clk_register_slow_rc_osc(void __iomem *sckcr,
+ const char *name,
+ unsigned long frequency,
+ unsigned long accuracy,
+ unsigned long startup)
+{
+ struct clk_slow_rc_osc *osc;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!sckcr || !name)
+ return ERR_PTR(-EINVAL);
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &slow_rc_osc_ops;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ init.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->sckcr = sckcr;
+ osc->frequency = frequency;
+ osc->accuracy = accuracy;
+ osc->startup_usec = startup;
+
+ clk = clk_register(NULL, &osc->hw);
+ if (IS_ERR(clk))
+ kfree(osc);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_slow_rc_osc_setup(struct device_node *np,
+ void __iomem *sckcr)
+{
+ struct clk *clk;
+ u32 frequency = 0;
+ u32 accuracy = 0;
+ u32 startup = 0;
+ const char *name = np->name;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "clock-frequency", &frequency);
+ of_property_read_u32(np, "clock-accuracy", &accuracy);
+ of_property_read_u32(np, "atmel,startup-time-usec", &startup);
+
+ clk = at91_clk_register_slow_rc_osc(sckcr, name, frequency, accuracy,
+ startup);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_sam9x5_slow *slowck = to_clk_sam9x5_slow(hw);
+ void __iomem *sckcr = slowck->sckcr;
+ u32 tmp;
+
+ if (index > 1)
+ return -EINVAL;
+
+ tmp = readl(sckcr);
+
+ if ((!index && !(tmp & AT91_SCKC_OSCSEL)) ||
+ (index && (tmp & AT91_SCKC_OSCSEL)))
+ return 0;
+
+ if (index)
+ tmp |= AT91_SCKC_OSCSEL;
+ else
+ tmp &= ~AT91_SCKC_OSCSEL;
+
+ writel(tmp, sckcr);
+
+ usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1);
+
+ return 0;
+}
+
+static u8 clk_sam9x5_slow_get_parent(struct clk_hw *hw)
+{
+ struct clk_sam9x5_slow *slowck = to_clk_sam9x5_slow(hw);
+
+ return !!(readl(slowck->sckcr) & AT91_SCKC_OSCSEL);
+}
+
+static const struct clk_ops sam9x5_slow_ops = {
+ .set_parent = clk_sam9x5_slow_set_parent,
+ .get_parent = clk_sam9x5_slow_get_parent,
+};
+
+static struct clk * __init
+at91_clk_register_sam9x5_slow(void __iomem *sckcr,
+ const char *name,
+ const char **parent_names,
+ int num_parents)
+{
+ struct clk_sam9x5_slow *slowck;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!sckcr || !name || !parent_names || !num_parents)
+ return ERR_PTR(-EINVAL);
+
+ slowck = kzalloc(sizeof(*slowck), GFP_KERNEL);
+ if (!slowck)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &sam9x5_slow_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = 0;
+
+ slowck->hw.init = &init;
+ slowck->sckcr = sckcr;
+ slowck->parent = !!(readl(sckcr) & AT91_SCKC_OSCSEL);
+
+ clk = clk_register(NULL, &slowck->hw);
+ if (IS_ERR(clk))
+ kfree(slowck);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_slow_setup(struct device_node *np,
+ void __iomem *sckcr)
+{
+ struct clk *clk;
+ const char *parent_names[2];
+ int num_parents;
+ const char *name = np->name;
+ int i;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > 2)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_sam9x5_slow(sckcr, name, parent_names,
+ num_parents);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+static u8 clk_sam9260_slow_get_parent(struct clk_hw *hw)
+{
+ struct clk_sam9260_slow *slowck = to_clk_sam9260_slow(hw);
+
+ return !!(pmc_read(slowck->pmc, AT91_PMC_SR) & AT91_PMC_OSCSEL);
+}
+
+static const struct clk_ops sam9260_slow_ops = {
+ .get_parent = clk_sam9260_slow_get_parent,
+};
+
+static struct clk * __init
+at91_clk_register_sam9260_slow(struct at91_pmc *pmc,
+ const char *name,
+ const char **parent_names,
+ int num_parents)
+{
+ struct clk_sam9260_slow *slowck;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !name)
+ return ERR_PTR(-EINVAL);
+
+ if (!parent_names || !num_parents)
+ return ERR_PTR(-EINVAL);
+
+ slowck = kzalloc(sizeof(*slowck), GFP_KERNEL);
+ if (!slowck)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &sam9260_slow_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = 0;
+
+ slowck->hw.init = &init;
+ slowck->pmc = pmc;
+
+ clk = clk_register(NULL, &slowck->hw);
+ if (IS_ERR(clk))
+ kfree(slowck);
+
+ return clk;
+}
+
+void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_names[2];
+ int num_parents;
+ const char *name = np->name;
+ int i;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > 1)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_sam9260_slow(pmc, name, parent_names,
+ num_parents);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
}
static const struct of_device_id pmc_clk_ids[] __initconst = {
+ /* Slow oscillator */
+ {
+ .compatible = "atmel,at91sam9260-clk-slow",
+ .data = of_at91sam9260_clk_slow_setup,
+ },
/* Main clock */
+ {
+ .compatible = "atmel,at91rm9200-clk-main-osc",
+ .data = of_at91rm9200_clk_main_osc_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-main-rc-osc",
+ .data = of_at91sam9x5_clk_main_rc_osc_setup,
+ },
{
.compatible = "atmel,at91rm9200-clk-main",
.data = of_at91rm9200_clk_main_setup,
},
+ {
+ .compatible = "atmel,at91sam9x5-clk-main",
+ .data = of_at91sam9x5_clk_main_setup,
+ },
/* PLL clocks */
{
.compatible = "atmel,at91rm9200-clk-pll",
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
+extern void __init of_at91sam9260_clk_slow_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+extern void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np,
+ struct at91_pmc *pmc);
extern void __init of_at91rm9200_clk_main_setup(struct device_node *np,
struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc);
extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
struct at91_pmc *pmc);
--- /dev/null
+/*
+ * drivers/clk/at91/sckc.c
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "sckc.h"
+
+static const struct of_device_id sckc_clk_ids[] __initconst = {
+ /* Slow clock */
+ {
+ .compatible = "atmel,at91sam9x5-clk-slow-osc",
+ .data = of_at91sam9x5_clk_slow_osc_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-slow-rc-osc",
+ .data = of_at91sam9x5_clk_slow_rc_osc_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-slow",
+ .data = of_at91sam9x5_clk_slow_setup,
+ },
+ { /*sentinel*/ }
+};
+
+static void __init of_at91sam9x5_sckc_setup(struct device_node *np)
+{
+ struct device_node *childnp;
+ void (*clk_setup)(struct device_node *, void __iomem *);
+ const struct of_device_id *clk_id;
+ void __iomem *regbase = of_iomap(np, 0);
+
+ if (!regbase)
+ return;
+
+ for_each_child_of_node(np, childnp) {
+ clk_id = of_match_node(sckc_clk_ids, childnp);
+ if (!clk_id)
+ continue;
+ clk_setup = clk_id->data;
+ clk_setup(childnp, regbase);
+ }
+}
+CLK_OF_DECLARE(at91sam9x5_clk_sckc, "atmel,at91sam9x5-sckc",
+ of_at91sam9x5_sckc_setup);
--- /dev/null
+/*
+ * drivers/clk/at91/sckc.h
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AT91_SCKC_H_
+#define __AT91_SCKC_H_
+
+extern void __init of_at91sam9x5_clk_slow_osc_setup(struct device_node *np,
+ void __iomem *sckcr);
+extern void __init of_at91sam9x5_clk_slow_rc_osc_setup(struct device_node *np,
+ void __iomem *sckcr);
+extern void __init of_at91sam9x5_clk_slow_setup(struct device_node *np,
+ void __iomem *sckcr);
+
+#endif /* __AT91_SCKC_H_ */
[tegra_clk_sdmmc2_8] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true },
[tegra_clk_i2s1] = { .dt_id = TEGRA124_CLK_I2S1, .present = true },
[tegra_clk_i2c1] = { .dt_id = TEGRA124_CLK_I2C1, .present = true },
- [tegra_clk_ndflash] = { .dt_id = TEGRA124_CLK_NDFLASH, .present = true },
[tegra_clk_sdmmc1_8] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true },
[tegra_clk_sdmmc4_8] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true },
[tegra_clk_pwm] = { .dt_id = TEGRA124_CLK_PWM, .present = true },
[tegra_clk_trace] = { .dt_id = TEGRA124_CLK_TRACE, .present = true },
[tegra_clk_soc_therm] = { .dt_id = TEGRA124_CLK_SOC_THERM, .present = true },
[tegra_clk_dtv] = { .dt_id = TEGRA124_CLK_DTV, .present = true },
- [tegra_clk_ndspeed] = { .dt_id = TEGRA124_CLK_NDSPEED, .present = true },
[tegra_clk_i2cslow] = { .dt_id = TEGRA124_CLK_I2CSLOW, .present = true },
[tegra_clk_dsib] = { .dt_id = TEGRA124_CLK_DSIB, .present = true },
[tegra_clk_tsec] = { .dt_id = TEGRA124_CLK_TSEC, .present = true },
[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true },
[tegra_clk_dsia_mux] = { .dt_id = TEGRA124_CLK_DSIA_MUX, .present = true },
[tegra_clk_dsib_mux] = { .dt_id = TEGRA124_CLK_DSIB_MUX, .present = true },
- [tegra_clk_uarte] = { .dt_id = TEGRA124_CLK_UARTE, .present = true },
};
static struct tegra_devclk devclks[] __initdata = {
struct clk *clk;
u32 range[2];
+ vexpress_sysreg_of_early_init();
+
osc = kzalloc(sizeof(*osc), GFP_KERNEL);
if (!osc)
- goto error;
+ return;
osc->func = vexpress_config_func_get_by_node(node);
if (!osc->func) {
static struct clock_event_device __percpu *arch_timer_evt;
static bool arch_timer_use_virtual = true;
+static bool arch_timer_c3stop;
static bool arch_timer_mem_use_virtual;
/*
clk->features = CLOCK_EVT_FEAT_ONESHOT;
if (type == ARCH_CP15_TIMER) {
- clk->features |= CLOCK_EVT_FEAT_C3STOP;
+ if (arch_timer_c3stop)
+ clk->features |= CLOCK_EVT_FEAT_C3STOP;
clk->name = "arch_sys_timer";
clk->rating = 450;
clk->cpumask = cpumask_of(smp_processor_id());
}
}
+ arch_timer_c3stop = !of_property_read_bool(np, "always-on");
+
arch_timer_register();
arch_timer_common_init();
}
evt->set_mode = exynos4_tick_set_mode;
evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
evt->rating = 450;
- clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
- 0xf, 0x7fffffff);
exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
evt->irq);
return -EIO;
}
+ irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu));
} else {
enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
+ clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
+ 0xf, 0x7fffffff);
return 0;
}
unsigned long action, void *hcpu)
{
struct mct_clock_event_device *mevt;
- unsigned int cpu;
/*
* Grab cpu pointer in each case to avoid spurious
mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_local_timer_setup(&mevt->evt);
break;
- case CPU_ONLINE:
- cpu = (unsigned long)hcpu;
- if (mct_int_type == MCT_INT_SPI)
- irq_set_affinity(mct_irqs[MCT_L0_IRQ + cpu],
- cpumask_of(cpu));
- break;
case CPU_DYING:
mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_local_timer_stop(&mevt->evt);
return ret;
}
-CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_add);
+static void __init zevio_timer_init(struct device_node *node)
+{
+ BUG_ON(zevio_timer_add(node));
+}
+
+CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_init);
config ARM_HIGHBANK_CPUFREQ
tristate "Calxeda Highbank-based"
- depends on ARCH_HIGHBANK
- select GENERIC_CPUFREQ_CPU0
- select PM_OPP
- select REGULATOR
-
+ depends on ARCH_HIGHBANK && GENERIC_CPUFREQ_CPU0 && REGULATOR
default m
help
This adds the CPUFreq driver for Calxeda Highbank SoC
* Sets a new clock ratio.
*/
-static void longhaul_setstate(struct cpufreq_policy *policy,
+static int longhaul_setstate(struct cpufreq_policy *policy,
unsigned int table_index)
{
unsigned int mults_index;
/* Safety precautions */
mult = mults[mults_index & 0x1f];
if (mult == -1)
- return;
+ return -EINVAL;
+
speed = calc_speed(mult);
if ((speed > highest_speed) || (speed < lowest_speed))
- return;
+ return -EINVAL;
+
/* Voltage transition before frequency transition? */
if (can_scale_voltage && longhaul_index < table_index)
dir = 1;
freqs.old = calc_speed(longhaul_get_cpu_mult());
freqs.new = speed;
- cpufreq_freq_transition_begin(policy, &freqs);
-
pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
retry_loop:
goto retry_loop;
}
}
- /* Report true CPU frequency */
- cpufreq_freq_transition_end(policy, &freqs, 0);
- if (!bm_timeout)
+ if (!bm_timeout) {
printk(KERN_INFO PFX "Warning: Timeout while waiting for "
"idle PCI bus.\n");
+ return -EBUSY;
+ }
+
+ return 0;
}
/*
unsigned int i;
unsigned int dir = 0;
u8 vid, current_vid;
+ int retval = 0;
if (!can_scale_voltage)
- longhaul_setstate(policy, table_index);
+ retval = longhaul_setstate(policy, table_index);
else {
/* On test system voltage transitions exceeding single
* step up or down were turning motherboard off. Both
while (i != table_index) {
vid = (longhaul_table[i].driver_data >> 8) & 0x1f;
if (vid != current_vid) {
- longhaul_setstate(policy, i);
+ retval = longhaul_setstate(policy, i);
current_vid = vid;
msleep(200);
}
else
i--;
}
- longhaul_setstate(policy, table_index);
+ retval = longhaul_setstate(policy, table_index);
}
+
longhaul_index = table_index;
- return 0;
+ return retval;
}
for (i = 0; i < numscales; i++) {
if (mults[i] == maxmult) {
+ struct cpufreq_freqs freqs;
+
+ freqs.old = policy->cur;
+ freqs.new = longhaul_table[i].frequency;
+ freqs.flags = 0;
+
+ cpufreq_freq_transition_begin(policy, &freqs);
longhaul_setstate(policy, i);
+ cpufreq_freq_transition_end(policy, &freqs, 0);
break;
}
}
static int powernow_k6_target(struct cpufreq_policy *policy,
unsigned int best_i)
{
- struct cpufreq_freqs freqs;
if (clock_ratio[best_i].driver_data > max_multiplier) {
printk(KERN_ERR PFX "invalid target frequency\n");
return -EINVAL;
}
- freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
- freqs.new = busfreq * clock_ratio[best_i].driver_data;
-
- cpufreq_freq_transition_begin(policy, &freqs);
-
powernow_k6_set_cpu_multiplier(best_i);
- cpufreq_freq_transition_end(policy, &freqs, 0);
-
return 0;
}
static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
{
unsigned int i;
- for (i = 0; i < 8; i++) {
- if (i == max_multiplier)
+
+ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (clock_ratio[i].driver_data == max_multiplier) {
+ struct cpufreq_freqs freqs;
+
+ freqs.old = policy->cur;
+ freqs.new = clock_ratio[i].frequency;
+ freqs.flags = 0;
+
+ cpufreq_freq_transition_begin(policy, &freqs);
powernow_k6_target(policy, i);
+ cpufreq_freq_transition_end(policy, &freqs, 0);
+ break;
+ }
}
return 0;
}
freqs.new = powernow_table[index].frequency;
- cpufreq_freq_transition_begin(policy, &freqs);
-
/* Now do the magic poking into the MSRs. */
if (have_a0 == 1) /* A0 errata 5 */
if (have_a0 == 1)
local_irq_enable();
- cpufreq_freq_transition_end(policy, &freqs, 0);
-
return 0;
}
#include <asm/cputhreads.h>
#include <asm/reg.h>
+#include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
#define POWERNV_MAX_PSTATES 256
struct cpufreq_frequency_table *table;
struct cpu_data *data;
unsigned int cpu = policy->cpu;
+ u64 transition_latency_hz;
np = of_get_cpu_node(cpu, NULL);
if (!np)
for_each_cpu(i, per_cpu(cpu_mask, cpu))
per_cpu(cpu_data, i) = data;
+ transition_latency_hz = 12ULL * NSEC_PER_SEC;
policy->cpuinfo.transition_latency =
- (12 * NSEC_PER_SEC) / fsl_get_sys_freq();
+ do_div(transition_latency_hz, fsl_get_sys_freq());
+
of_node_put(np);
return 0;
policy->max = policy->cpuinfo.max_freq = 1000000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->clk = clk_get(NULL, "MAIN_CLK");
- if (IS_ERR(policy->clk))
- return PTR_ERR(policy->clk);
- return 0;
+ return PTR_ERR_OR_ZERO(policy->clk);
}
static struct cpufreq_driver ucv2_driver = {
#
# ARM CPU Idle drivers
#
+config ARM_ARMADA_370_XP_CPUIDLE
+ bool "CPU Idle Driver for Armada 370/XP family processors"
+ depends on ARCH_MVEBU
+ help
+ Select this to enable cpuidle on Armada 370/XP processors.
config ARM_BIG_LITTLE_CPUIDLE
bool "Support for ARM big.LITTLE processors"
##################################################################################
# ARM SoC drivers
+obj-$(CONFIG_ARM_ARMADA_370_XP_CPUIDLE) += cpuidle-armada-370-xp.o
obj-$(CONFIG_ARM_BIG_LITTLE_CPUIDLE) += cpuidle-big_little.o
obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE) += cpuidle-calxeda.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o
--- /dev/null
+/*
+ * Marvell Armada 370 and Armada XP SoC cpuidle driver
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Maintainer: Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <linux/platform_device.h>
+#include <asm/cpuidle.h>
+
+#define ARMADA_370_XP_MAX_STATES 3
+#define ARMADA_370_XP_FLAG_DEEP_IDLE 0x10000
+
+static int (*armada_370_xp_cpu_suspend)(int);
+
+static int armada_370_xp_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ int ret;
+ bool deepidle = false;
+ cpu_pm_enter();
+
+ if (drv->states[index].flags & ARMADA_370_XP_FLAG_DEEP_IDLE)
+ deepidle = true;
+
+ ret = armada_370_xp_cpu_suspend(deepidle);
+ if (ret)
+ return ret;
+
+ cpu_pm_exit();
+
+ return index;
+}
+
+static struct cpuidle_driver armada_370_xp_idle_driver = {
+ .name = "armada_370_xp_idle",
+ .states[0] = ARM_CPUIDLE_WFI_STATE,
+ .states[1] = {
+ .enter = armada_370_xp_enter_idle,
+ .exit_latency = 10,
+ .power_usage = 50,
+ .target_residency = 100,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "MV CPU IDLE",
+ .desc = "CPU power down",
+ },
+ .states[2] = {
+ .enter = armada_370_xp_enter_idle,
+ .exit_latency = 100,
+ .power_usage = 5,
+ .target_residency = 1000,
+ .flags = CPUIDLE_FLAG_TIME_VALID |
+ ARMADA_370_XP_FLAG_DEEP_IDLE,
+ .name = "MV CPU DEEP IDLE",
+ .desc = "CPU and L2 Fabric power down",
+ },
+ .state_count = ARMADA_370_XP_MAX_STATES,
+};
+
+static int armada_370_xp_cpuidle_probe(struct platform_device *pdev)
+{
+
+ armada_370_xp_cpu_suspend = (void *)(pdev->dev.platform_data);
+ return cpuidle_register(&armada_370_xp_idle_driver, NULL);
+}
+
+static struct platform_driver armada_370_xp_cpuidle_plat_driver = {
+ .driver = {
+ .name = "cpuidle-armada-370-xp",
+ .owner = THIS_MODULE,
+ },
+ .probe = armada_370_xp_cpuidle_probe,
+};
+
+module_platform_driver(armada_370_xp_cpuidle_plat_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_DESCRIPTION("Armada 370/XP cpu idle driver");
+MODULE_LICENSE("GPL");
{
struct gpio_chip *chip = acpi_gpio->chip;
- if (!chip->dev || !chip->to_irq)
+ if (!chip->to_irq)
return;
INIT_LIST_HEAD(&acpi_gpio->events);
struct acpi_gpio_event *event, *ep;
struct gpio_chip *chip = acpi_gpio->chip;
- if (!chip->dev || !chip->to_irq)
+ if (!chip->to_irq)
return;
list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
if (function == ACPI_WRITE)
gpiod_set_raw_value(desc, !!((1 << i) & *value));
else
- *value |= gpiod_get_raw_value(desc) << i;
+ *value |= (u64)gpiod_get_raw_value(desc) << i;
}
out:
acpi_handle handle;
acpi_status status;
+ if (!chip || !chip->dev)
+ return;
+
handle = ACPI_HANDLE(chip->dev);
if (!handle)
return;
acpi_handle handle;
acpi_status status;
+ if (!chip || !chip->dev)
+ return;
+
handle = ACPI_HANDLE(chip->dev);
if (!handle)
return;
{
struct gpio_chip *chip = d->host_data;
- irq_set_chip_and_handler(irq, chip->irqchip, chip->irq_handler);
irq_set_chip_data(irq, chip);
+ irq_set_chip_and_handler(irq, chip->irqchip, chip->irq_handler);
#ifdef CONFIG_ARM
set_irq_flags(irq, IRQF_VALID);
#else
plane->crtc = crtc;
plane->fb = crtc->primary->fb;
+ drm_framebuffer_reference(plane->fb);
return 0;
}
buffer->sgt = sgt;
exynos_gem_obj->base.import_attach = attach;
- DRM_DEBUG_PRIME("dma_addr = 0x%x, size = 0x%lx\n", buffer->dma_addr,
+ DRM_DEBUG_PRIME("dma_addr = %pad, size = 0x%lx\n", &buffer->dma_addr,
buffer->size);
return &exynos_gem_obj->base;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dsi->reg_base = devm_ioremap_resource(&pdev->dev, res);
- if (!dsi->reg_base) {
+ if (IS_ERR(dsi->reg_base)) {
dev_err(&pdev->dev, "failed to remap io region\n");
- return -EADDRNOTAVAIL;
+ return PTR_ERR(dsi->reg_base);
}
dsi->phy = devm_phy_get(&pdev->dev, "dsim");
win_data->enabled = true;
- DRM_DEBUG_KMS("dma_addr = 0x%x\n", win_data->dma_addr);
+ DRM_DEBUG_KMS("dma_addr = %pad\n", &win_data->dma_addr);
if (ctx->vblank_on)
schedule_work(&ctx->work);
/* Full ppgtt disabled by default for now due to issues. */
if (full)
- return false; /* HAS_PPGTT(dev) */
+ return HAS_PPGTT(dev) && (i915.enable_ppgtt == 2);
else
return HAS_ALIASING_PPGTT(dev);
}
spin_lock(&dev_priv->irq_lock);
for (i = 1; i < HPD_NUM_PINS; i++) {
- WARN_ONCE(hpd[i] & hotplug_trigger &&
- dev_priv->hpd_stats[i].hpd_mark == HPD_DISABLED,
- "Received HPD interrupt (0x%08x) on pin %d (0x%08x) although disabled\n",
- hotplug_trigger, i, hpd[i]);
+ if (hpd[i] & hotplug_trigger &&
+ dev_priv->hpd_stats[i].hpd_mark == HPD_DISABLED) {
+ /*
+ * On GMCH platforms the interrupt mask bits only
+ * prevent irq generation, not the setting of the
+ * hotplug bits itself. So only WARN about unexpected
+ * interrupts on saner platforms.
+ */
+ WARN_ONCE(INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev),
+ "Received HPD interrupt (0x%08x) on pin %d (0x%08x) although disabled\n",
+ hotplug_trigger, i, hpd[i]);
+
+ continue;
+ }
if (!(hpd[i] & hotplug_trigger) ||
dev_priv->hpd_stats[i].hpd_mark != HPD_ENABLED)
# define MI_FLUSH_ENABLE (1 << 12)
# define ASYNC_FLIP_PERF_DISABLE (1 << 14)
# define MODE_IDLE (1 << 9)
+# define STOP_RING (1 << 8)
#define GEN6_GT_MODE 0x20d0
#define GEN7_GT_MODE 0x7008
PIPE_CONF_CHECK_I(pipe_src_w);
PIPE_CONF_CHECK_I(pipe_src_h);
- PIPE_CONF_CHECK_I(gmch_pfit.control);
- /* pfit ratios are autocomputed by the hw on gen4+ */
- if (INTEL_INFO(dev)->gen < 4)
- PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
- PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
+ /*
+ * FIXME: BIOS likes to set up a cloned config with lvds+external
+ * screen. Since we don't yet re-compute the pipe config when moving
+ * just the lvds port away to another pipe the sw tracking won't match.
+ *
+ * Proper atomic modesets with recomputed global state will fix this.
+ * Until then just don't check gmch state for inherited modes.
+ */
+ if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_INHERITED_MODE)) {
+ PIPE_CONF_CHECK_I(gmch_pfit.control);
+ /* pfit ratios are autocomputed by the hw on gen4+ */
+ if (INTEL_INFO(dev)->gen < 4)
+ PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
+ PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
+ }
+
PIPE_CONF_CHECK_I(pch_pfit.enabled);
if (current_config->pch_pfit.enabled) {
PIPE_CONF_CHECK_I(pch_pfit.pos);
base.head) {
memset(&crtc->config, 0, sizeof(crtc->config));
+ crtc->config.quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
+
crtc->active = dev_priv->display.get_pipe_config(crtc,
&crtc->config);
{
struct drm_connector *connector = &intel_connector->base;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *fixed_mode = NULL;
bool has_dpcd;
if (!is_edp(intel_dp))
return true;
+ /* The VDD bit needs a power domain reference, so if the bit is already
+ * enabled when we boot, grab this reference. */
+ if (edp_have_panel_vdd(intel_dp)) {
+ enum intel_display_power_domain power_domain;
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+ }
+
/* Cache DPCD and EDID for edp. */
intel_edp_panel_vdd_on(intel_dp);
has_dpcd = intel_dp_get_dpcd(intel_dp);
* tracked with quirk flags so that fastboot and state checker can act
* accordingly.
*/
-#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
+#define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */
+#define PIPE_CONFIG_QUIRK_INHERITED_MODE (1<<1) /* mode inherited from firmware */
unsigned long quirks;
/* User requested mode, only valid as a starting point to
mutex_lock(&dev->struct_mutex);
+ if (intel_fb &&
+ (sizes->fb_width > intel_fb->base.width ||
+ sizes->fb_height > intel_fb->base.height)) {
+ DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
+ " releasing it\n",
+ intel_fb->base.width, intel_fb->base.height,
+ sizes->fb_width, sizes->fb_height);
+ drm_framebuffer_unreference(&intel_fb->base);
+ intel_fb = ifbdev->fb = NULL;
+ }
if (!intel_fb || WARN_ON(!intel_fb->obj)) {
DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
ret = intelfb_alloc(helper, sizes);
}
}
-static int hdmi_portclock_limit(struct intel_hdmi *hdmi)
+static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
{
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
- if (!hdmi->has_hdmi_sink || IS_G4X(dev))
+ if ((respect_dvi_limit && !hdmi->has_hdmi_sink) || IS_G4X(dev))
return 165000;
else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8)
return 300000;
intel_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
- if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector)))
+ if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector),
+ true))
return MODE_CLOCK_HIGH;
if (mode->clock < 20000)
return MODE_CLOCK_LOW;
struct drm_device *dev = encoder->base.dev;
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
int clock_12bpc = pipe_config->adjusted_mode.crtc_clock * 3 / 2;
- int portclock_limit = hdmi_portclock_limit(intel_hdmi);
+ int portclock_limit = hdmi_portclock_limit(intel_hdmi, false);
int desired_bpp;
if (intel_hdmi->color_range_auto) {
I915_WRITE(HWS_PGA, addr);
}
-static int init_ring_common(struct intel_ring_buffer *ring)
+static bool stop_ring(struct intel_ring_buffer *ring)
{
- struct drm_device *dev = ring->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj = ring->obj;
- int ret = 0;
- u32 head;
+ struct drm_i915_private *dev_priv = to_i915(ring->dev);
- gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
+ if (!IS_GEN2(ring->dev)) {
+ I915_WRITE_MODE(ring, _MASKED_BIT_ENABLE(STOP_RING));
+ if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000)) {
+ DRM_ERROR("%s :timed out trying to stop ring\n", ring->name);
+ return false;
+ }
+ }
- /* Stop the ring if it's running. */
I915_WRITE_CTL(ring, 0);
I915_WRITE_HEAD(ring, 0);
ring->write_tail(ring, 0);
- if (wait_for_atomic((I915_READ_MODE(ring) & MODE_IDLE) != 0, 1000))
- DRM_ERROR("%s :timed out trying to stop ring\n", ring->name);
- if (I915_NEED_GFX_HWS(dev))
- intel_ring_setup_status_page(ring);
- else
- ring_setup_phys_status_page(ring);
+ if (!IS_GEN2(ring->dev)) {
+ (void)I915_READ_CTL(ring);
+ I915_WRITE_MODE(ring, _MASKED_BIT_DISABLE(STOP_RING));
+ }
- head = I915_READ_HEAD(ring) & HEAD_ADDR;
+ return (I915_READ_HEAD(ring) & HEAD_ADDR) == 0;
+}
- /* G45 ring initialization fails to reset head to zero */
- if (head != 0) {
+static int init_ring_common(struct intel_ring_buffer *ring)
+{
+ struct drm_device *dev = ring->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj = ring->obj;
+ int ret = 0;
+
+ gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
+
+ if (!stop_ring(ring)) {
+ /* G45 ring initialization often fails to reset head to zero */
DRM_DEBUG_KMS("%s head not reset to zero "
"ctl %08x head %08x tail %08x start %08x\n",
ring->name,
I915_READ_TAIL(ring),
I915_READ_START(ring));
- I915_WRITE_HEAD(ring, 0);
-
- if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+ if (!stop_ring(ring)) {
DRM_ERROR("failed to set %s head to zero "
"ctl %08x head %08x tail %08x start %08x\n",
ring->name,
I915_READ_HEAD(ring),
I915_READ_TAIL(ring),
I915_READ_START(ring));
+ ret = -EIO;
+ goto out;
}
}
+ if (I915_NEED_GFX_HWS(dev))
+ intel_ring_setup_status_page(ring);
+ else
+ ring_setup_phys_status_page(ring);
+
/* Initialize the ring. This must happen _after_ we've cleared the ring
* registers with the above sequence (the readback of the HEAD registers
* also enforces ordering), otherwise the hw might lose the new ring
#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
#define I915_READ_MODE(ring) I915_READ(RING_MI_MODE((ring)->mmio_base))
+#define I915_WRITE_MODE(ring, val) I915_WRITE(RING_MI_MODE((ring)->mmio_base), val)
enum intel_ring_hangcheck_action {
HANGCHECK_IDLE = 0,
MDP4_DMA_CURSOR_BLEND_CONFIG_CURSOR_EN);
} else {
/* disable cursor: */
- mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_BASE(dma), 0);
- mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_BLEND_CONFIG(dma),
- MDP4_DMA_CURSOR_BLEND_CONFIG_FORMAT(CURSOR_ARGB));
+ mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_BASE(dma),
+ mdp4_kms->blank_cursor_iova);
}
/* and drop the iova ref + obj rev when done scanning out: */
if (old_bo) {
/* drop our previous reference: */
- msm_gem_put_iova(old_bo, mdp4_kms->id);
- drm_gem_object_unreference_unlocked(old_bo);
+ drm_flip_work_queue(&mdp4_crtc->unref_cursor_work, old_bo);
}
- crtc_flush(crtc);
request_pending(crtc, PENDING_CURSOR);
return 0;
VERB("status=%08x", status);
+ mdp_dispatch_irqs(mdp_kms, status);
+
for (id = 0; id < priv->num_crtcs; id++)
if (status & mdp4_crtc_vblank(priv->crtcs[id]))
drm_handle_vblank(dev, id);
- mdp_dispatch_irqs(mdp_kms, status);
-
return IRQ_HANDLED;
}
static void mdp4_destroy(struct msm_kms *kms)
{
struct mdp4_kms *mdp4_kms = to_mdp4_kms(to_mdp_kms(kms));
+ if (mdp4_kms->blank_cursor_iova)
+ msm_gem_put_iova(mdp4_kms->blank_cursor_bo, mdp4_kms->id);
+ if (mdp4_kms->blank_cursor_bo)
+ drm_gem_object_unreference(mdp4_kms->blank_cursor_bo);
kfree(mdp4_kms);
}
goto fail;
}
+ mutex_lock(&dev->struct_mutex);
+ mdp4_kms->blank_cursor_bo = msm_gem_new(dev, SZ_16K, MSM_BO_WC);
+ mutex_unlock(&dev->struct_mutex);
+ if (IS_ERR(mdp4_kms->blank_cursor_bo)) {
+ ret = PTR_ERR(mdp4_kms->blank_cursor_bo);
+ dev_err(dev->dev, "could not allocate blank-cursor bo: %d\n", ret);
+ mdp4_kms->blank_cursor_bo = NULL;
+ goto fail;
+ }
+
+ ret = msm_gem_get_iova(mdp4_kms->blank_cursor_bo, mdp4_kms->id,
+ &mdp4_kms->blank_cursor_iova);
+ if (ret) {
+ dev_err(dev->dev, "could not pin blank-cursor bo: %d\n", ret);
+ goto fail;
+ }
+
return kms;
fail:
struct clk *lut_clk;
struct mdp_irq error_handler;
+
+ /* empty/blank cursor bo to use when cursor is "disabled" */
+ struct drm_gem_object *blank_cursor_bo;
+ uint32_t blank_cursor_iova;
};
#define to_mdp4_kms(x) container_of(x, struct mdp4_kms, base)
VERB("status=%08x", status);
+ mdp_dispatch_irqs(mdp_kms, status);
+
for (id = 0; id < priv->num_crtcs; id++)
if (status & mdp5_crtc_vblank(priv->crtcs[id]))
drm_handle_vblank(dev, id);
-
- mdp_dispatch_irqs(mdp_kms, status);
}
irqreturn_t mdp5_irq(struct msm_kms *kms)
dma_addr_t paddr;
int ret, size;
- /* only doing ARGB32 since this is what is needed to alpha-blend
- * with video overlays:
- */
sizes->surface_bpp = 32;
- sizes->surface_depth = 32;
+ sizes->surface_depth = 24;
DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width,
sizes->surface_height, sizes->surface_bpp,
if (iommu_present(&platform_bus_type))
drm_gem_put_pages(obj, msm_obj->pages, true, false);
- else
+ else {
drm_mm_remove_node(msm_obj->vram_node);
+ drm_free_large(msm_obj->pages);
+ }
msm_obj->pages = NULL;
}
{
int ret;
+ radeon_connector->ddc_bus->rec.hpd = radeon_connector->hpd.hpd;
radeon_connector->ddc_bus->aux.dev = radeon_connector->base.kdev;
radeon_connector->ddc_bus->aux.transfer = radeon_dp_aux_transfer;
ret = drm_dp_aux_register_i2c_bus(&radeon_connector->ddc_bus->aux);
tmp = 0xCAFEDEAD;
writel(tmp, ptr);
- r = radeon_ring_lock(rdev, ring, 4);
+ r = radeon_ring_lock(rdev, ring, 5);
if (r) {
DRM_ERROR("radeon: dma failed to lock ring %d (%d).\n", ring->idx, r);
return r;
u32 line_time_us, vblank_lines;
u32 vblank_time_us = 0xffffffff; /* if the displays are off, vblank time is max */
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- radeon_crtc = to_radeon_crtc(crtc);
- if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
- line_time_us = (radeon_crtc->hw_mode.crtc_htotal * 1000) /
- radeon_crtc->hw_mode.clock;
- vblank_lines = radeon_crtc->hw_mode.crtc_vblank_end -
- radeon_crtc->hw_mode.crtc_vdisplay +
- (radeon_crtc->v_border * 2);
- vblank_time_us = vblank_lines * line_time_us;
- break;
+ if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ radeon_crtc = to_radeon_crtc(crtc);
+ if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
+ line_time_us = (radeon_crtc->hw_mode.crtc_htotal * 1000) /
+ radeon_crtc->hw_mode.clock;
+ vblank_lines = radeon_crtc->hw_mode.crtc_vblank_end -
+ radeon_crtc->hw_mode.crtc_vdisplay +
+ (radeon_crtc->v_border * 2);
+ vblank_time_us = vblank_lines * line_time_us;
+ break;
+ }
}
}
struct radeon_crtc *radeon_crtc;
u32 vrefresh = 0;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- radeon_crtc = to_radeon_crtc(crtc);
- if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
- vrefresh = radeon_crtc->hw_mode.vrefresh;
- break;
+ if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ radeon_crtc = to_radeon_crtc(crtc);
+ if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) {
+ vrefresh = radeon_crtc->hw_mode.vrefresh;
+ break;
+ }
}
}
-
return vrefresh;
}
has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true);
}
+ /* some newer PX laptops mark the dGPU as a non-VGA display device */
+ while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_OTHER << 8, pdev)) != NULL) {
+ vga_count++;
+
+ has_atpx |= (radeon_atpx_pci_probe_handle(pdev) == true);
+ }
+
if (has_atpx && vga_count == 2) {
acpi_get_name(radeon_atpx_priv.atpx.handle, ACPI_FULL_PATHNAME, &buffer);
printk(KERN_INFO "VGA switcheroo: detected switching method %s handle\n",
}
}
+/**
+ * avivo_get_fb_ref_div - feedback and ref divider calculation
+ *
+ * @nom: nominator
+ * @den: denominator
+ * @post_div: post divider
+ * @fb_div_max: feedback divider maximum
+ * @ref_div_max: reference divider maximum
+ * @fb_div: resulting feedback divider
+ * @ref_div: resulting reference divider
+ *
+ * Calculate feedback and reference divider for a given post divider. Makes
+ * sure we stay within the limits.
+ */
+static void avivo_get_fb_ref_div(unsigned nom, unsigned den, unsigned post_div,
+ unsigned fb_div_max, unsigned ref_div_max,
+ unsigned *fb_div, unsigned *ref_div)
+{
+ /* limit reference * post divider to a maximum */
+ ref_div_max = min(210 / post_div, ref_div_max);
+
+ /* get matching reference and feedback divider */
+ *ref_div = min(max(DIV_ROUND_CLOSEST(den, post_div), 1u), ref_div_max);
+ *fb_div = DIV_ROUND_CLOSEST(nom * *ref_div * post_div, den);
+
+ /* limit fb divider to its maximum */
+ if (*fb_div > fb_div_max) {
+ *ref_div = DIV_ROUND_CLOSEST(*ref_div * fb_div_max, *fb_div);
+ *fb_div = fb_div_max;
+ }
+}
+
/**
* radeon_compute_pll_avivo - compute PLL paramaters
*
u32 *ref_div_p,
u32 *post_div_p)
{
+ unsigned target_clock = pll->flags & RADEON_PLL_USE_FRAC_FB_DIV ?
+ freq : freq / 10;
+
unsigned fb_div_min, fb_div_max, fb_div;
unsigned post_div_min, post_div_max, post_div;
unsigned ref_div_min, ref_div_max, ref_div;
ref_div_min = pll->reference_div;
else
ref_div_min = pll->min_ref_div;
- ref_div_max = pll->max_ref_div;
+
+ if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV &&
+ pll->flags & RADEON_PLL_USE_REF_DIV)
+ ref_div_max = pll->reference_div;
+ else
+ ref_div_max = pll->max_ref_div;
/* determine allowed post divider range */
if (pll->flags & RADEON_PLL_USE_POST_DIV) {
post_div_min = pll->post_div;
post_div_max = pll->post_div;
} else {
- unsigned target_clock = freq / 10;
unsigned vco_min, vco_max;
if (pll->flags & RADEON_PLL_IS_LCD) {
vco_max = pll->pll_out_max;
}
+ if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) {
+ vco_min *= 10;
+ vco_max *= 10;
+ }
+
post_div_min = vco_min / target_clock;
if ((target_clock * post_div_min) < vco_min)
++post_div_min;
}
/* represent the searched ratio as fractional number */
- nom = pll->flags & RADEON_PLL_USE_FRAC_FB_DIV ? freq : freq / 10;
+ nom = target_clock;
den = pll->reference_freq;
/* reduce the numbers to a simpler ratio */
diff_best = ~0;
for (post_div = post_div_min; post_div <= post_div_max; ++post_div) {
- unsigned diff = abs(den - den / post_div * post_div);
+ unsigned diff;
+ avivo_get_fb_ref_div(nom, den, post_div, fb_div_max,
+ ref_div_max, &fb_div, &ref_div);
+ diff = abs(target_clock - (pll->reference_freq * fb_div) /
+ (ref_div * post_div));
+
if (diff < diff_best || (diff == diff_best &&
!(pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP))) {
}
post_div = post_div_best;
- /* limit reference * post divider to a maximum */
- ref_div_max = min(210 / post_div, ref_div_max);
-
- /* get matching reference and feedback divider */
- ref_div = max(DIV_ROUND_CLOSEST(den, post_div), 1u);
- fb_div = DIV_ROUND_CLOSEST(nom * ref_div * post_div, den);
-
- /* we're almost done, but reference and feedback
- divider might be to large now */
-
- nom = fb_div;
- den = ref_div;
-
- if (fb_div > fb_div_max) {
- ref_div = DIV_ROUND_CLOSEST(den * fb_div_max, nom);
- fb_div = fb_div_max;
- }
-
- if (ref_div > ref_div_max) {
- ref_div = ref_div_max;
- fb_div = DIV_ROUND_CLOSEST(nom * ref_div_max, den);
- }
+ /* get the feedback and reference divider for the optimal value */
+ avivo_get_fb_ref_div(nom, den, post_div, fb_div_max, ref_div_max,
+ &fb_div, &ref_div);
/* reduce the numbers to a simpler ratio once more */
/* this also makes sure that the reference divider is large enough */
*post_div_p = post_div;
DRM_DEBUG_KMS("%d - %d, pll dividers - fb: %d.%d ref: %d, post %d\n",
- freq, *dot_clock_p, *fb_div_p, *frac_fb_div_p,
+ freq, *dot_clock_p * 10, *fb_div_p, *frac_fb_div_p,
ref_div, post_div);
}
flags |= RADEON_IS_PCI;
}
- if (radeon_runtime_pm == 1)
- flags |= RADEON_IS_PX;
- else if ((radeon_runtime_pm == -1) &&
- radeon_has_atpx() &&
- ((flags & RADEON_IS_IGP) == 0))
+ if ((radeon_runtime_pm != 0) &&
+ radeon_has_atpx() &&
+ ((flags & RADEON_IS_IGP) == 0))
flags |= RADEON_IS_PX;
/* radeon_device_init should report only fatal error
static int radeon_hwmon_init(struct radeon_device *rdev)
{
int err = 0;
- struct device *hwmon_dev;
switch (rdev->pm.int_thermal_type) {
case THERMAL_TYPE_RV6XX:
case THERMAL_TYPE_KV:
if (rdev->asic->pm.get_temperature == NULL)
return err;
- hwmon_dev = hwmon_device_register_with_groups(rdev->dev,
- "radeon", rdev,
- hwmon_groups);
- if (IS_ERR(hwmon_dev)) {
- err = PTR_ERR(hwmon_dev);
+ rdev->pm.int_hwmon_dev = hwmon_device_register_with_groups(rdev->dev,
+ "radeon", rdev,
+ hwmon_groups);
+ if (IS_ERR(rdev->pm.int_hwmon_dev)) {
+ err = PTR_ERR(rdev->pm.int_hwmon_dev);
dev_err(rdev->dev,
"Unable to register hwmon device: %d\n", err);
}
return err;
}
+static void radeon_hwmon_fini(struct radeon_device *rdev)
+{
+ if (rdev->pm.int_hwmon_dev)
+ hwmon_device_unregister(rdev->pm.int_hwmon_dev);
+}
+
static void radeon_dpm_thermal_work_handler(struct work_struct *work)
{
struct radeon_device *rdev =
case CHIP_RV670:
case CHIP_RS780:
case CHIP_RS880:
+ case CHIP_RV770:
case CHIP_BARTS:
case CHIP_TURKS:
case CHIP_CAICOS:
else
rdev->pm.pm_method = PM_METHOD_PROFILE;
break;
- case CHIP_RV770:
case CHIP_RV730:
case CHIP_RV710:
case CHIP_RV740:
device_remove_file(rdev->dev, &dev_attr_power_method);
}
+ radeon_hwmon_fini(rdev);
+
if (rdev->pm.power_state)
kfree(rdev->pm.power_state);
}
}
radeon_dpm_fini(rdev);
+ radeon_hwmon_fini(rdev);
+
if (rdev->pm.power_state)
kfree(rdev->pm.power_state);
}
rdev->pm.active_crtcs = 0;
rdev->pm.active_crtc_count = 0;
- list_for_each_entry(crtc,
- &ddev->mode_config.crtc_list, head) {
- radeon_crtc = to_radeon_crtc(crtc);
- if (radeon_crtc->enabled) {
- rdev->pm.active_crtcs |= (1 << radeon_crtc->crtc_id);
- rdev->pm.active_crtc_count++;
+ if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+ list_for_each_entry(crtc,
+ &ddev->mode_config.crtc_list, head) {
+ radeon_crtc = to_radeon_crtc(crtc);
+ if (radeon_crtc->enabled) {
+ rdev->pm.active_crtcs |= (1 << radeon_crtc->crtc_id);
+ rdev->pm.active_crtc_count++;
+ }
}
}
/* update active crtc counts */
rdev->pm.dpm.new_active_crtcs = 0;
rdev->pm.dpm.new_active_crtc_count = 0;
- list_for_each_entry(crtc,
- &ddev->mode_config.crtc_list, head) {
- radeon_crtc = to_radeon_crtc(crtc);
- if (crtc->enabled) {
- rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id);
- rdev->pm.dpm.new_active_crtc_count++;
+ if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
+ list_for_each_entry(crtc,
+ &ddev->mode_config.crtc_list, head) {
+ radeon_crtc = to_radeon_crtc(crtc);
+ if (crtc->enabled) {
+ rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id);
+ rdev->pm.dpm.new_active_crtc_count++;
+ }
}
}
struct drm_device *drm = crtc->dev;
struct drm_plane *plane;
- list_for_each_entry(plane, &drm->mode_config.plane_list, head) {
+ drm_for_each_legacy_plane(plane, &drm->mode_config.plane_list) {
if (plane->crtc == crtc) {
tegra_plane_disable(plane);
plane->crtc = NULL;
SVGA3dCmdSurfaceDMA dma;
} *cmd;
int ret;
+ SVGA3dCmdSurfaceDMASuffix *suffix;
+ uint32_t bo_size;
cmd = container_of(header, struct vmw_dma_cmd, header);
+ suffix = (SVGA3dCmdSurfaceDMASuffix *)((unsigned long) &cmd->dma +
+ header->size - sizeof(*suffix));
+
+ /* Make sure device and verifier stays in sync. */
+ if (unlikely(suffix->suffixSize != sizeof(*suffix))) {
+ DRM_ERROR("Invalid DMA suffix size.\n");
+ return -EINVAL;
+ }
+
ret = vmw_translate_guest_ptr(dev_priv, sw_context,
&cmd->dma.guest.ptr,
&vmw_bo);
if (unlikely(ret != 0))
return ret;
+ /* Make sure DMA doesn't cross BO boundaries. */
+ bo_size = vmw_bo->base.num_pages * PAGE_SIZE;
+ if (unlikely(cmd->dma.guest.ptr.offset > bo_size)) {
+ DRM_ERROR("Invalid DMA offset.\n");
+ return -EINVAL;
+ }
+
+ bo_size -= cmd->dma.guest.ptr.offset;
+ if (unlikely(suffix->maximumOffset > bo_size))
+ suffix->maximumOffset = bo_size;
+
ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_surface,
user_surface_converter, &cmd->dma.host.sid,
NULL);
if (cpu_has_tjmax(c))
dev_warn(dev, "Unable to read TjMax from CPU %u\n", id);
} else {
- val = (eax >> 16) & 0x7f;
+ val = (eax >> 16) & 0xff;
/*
* If the TjMax is not plausible, an assumption
* will be used
*/
- if (val >= 85) {
+ if (val) {
dev_dbg(dev, "TjMax is %d degrees C\n", val);
return val * 1000;
}
-/*
+ /*
* Driver for Linear Technology LTC2945 I2C Power Monitor
*
* Copyright (c) 2014 Guenter Roeck
reg = LTC2945_MAX_ADIN_H;
break;
default:
- BUG();
- break;
+ WARN_ONCE(1, "Bad register: 0x%x\n", reg);
+ return -EINVAL;
}
/* Reset maximum */
ret = regmap_bulk_write(regmap, reg, buf_max, num_regs);
struct vexpress_hwmon_data {
struct device *hwmon_dev;
struct vexpress_config_func *func;
+ const char *name;
};
static ssize_t vexpress_hwmon_name_show(struct device *dev,
struct device_attribute *dev_attr, char *buffer)
{
- const char *compatible = of_get_property(dev->of_node, "compatible",
- NULL);
+ struct vexpress_hwmon_data *data = dev_get_drvdata(dev);
- return sprintf(buffer, "%s\n", compatible);
+ return sprintf(buffer, "%s\n", data->name);
}
static ssize_t vexpress_hwmon_label_show(struct device *dev,
{
const char *label = of_get_property(dev->of_node, "label", NULL);
- if (!label)
- return -ENOENT;
-
return snprintf(buffer, PAGE_SIZE, "%s\n", label);
}
to_sensor_dev_attr(dev_attr)->index));
}
+static umode_t vexpress_hwmon_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct device_attribute *dev_attr = container_of(attr,
+ struct device_attribute, attr);
+
+ if (dev_attr->show == vexpress_hwmon_label_show &&
+ !of_get_property(dev->of_node, "label", NULL))
+ return 0;
+
+ return attr->mode;
+}
+
static DEVICE_ATTR(name, S_IRUGO, vexpress_hwmon_name_show, NULL);
#define VEXPRESS_HWMON_ATTRS(_name, _label_attr, _input_attr) \
NULL \
}
+struct vexpress_hwmon_type {
+ const char *name;
+ const struct attribute_group **attr_groups;
+};
+
#if !defined(CONFIG_REGULATOR_VEXPRESS)
static DEVICE_ATTR(in1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show,
NULL, 1000);
static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input);
static struct attribute_group vexpress_hwmon_group_volt = {
+ .is_visible = vexpress_hwmon_attr_is_visible,
.attrs = vexpress_hwmon_attrs_volt,
};
+static struct vexpress_hwmon_type vexpress_hwmon_volt = {
+ .name = "vexpress_volt",
+ .attr_groups = (const struct attribute_group *[]) {
+ &vexpress_hwmon_group_volt,
+ NULL,
+ },
+};
#endif
static DEVICE_ATTR(curr1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
NULL, 1000);
static VEXPRESS_HWMON_ATTRS(amp, curr1_label, curr1_input);
static struct attribute_group vexpress_hwmon_group_amp = {
+ .is_visible = vexpress_hwmon_attr_is_visible,
.attrs = vexpress_hwmon_attrs_amp,
};
+static struct vexpress_hwmon_type vexpress_hwmon_amp = {
+ .name = "vexpress_amp",
+ .attr_groups = (const struct attribute_group *[]) {
+ &vexpress_hwmon_group_amp,
+ NULL
+ },
+};
static DEVICE_ATTR(temp1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, vexpress_hwmon_u32_show,
NULL, 1000);
static VEXPRESS_HWMON_ATTRS(temp, temp1_label, temp1_input);
static struct attribute_group vexpress_hwmon_group_temp = {
+ .is_visible = vexpress_hwmon_attr_is_visible,
.attrs = vexpress_hwmon_attrs_temp,
};
+static struct vexpress_hwmon_type vexpress_hwmon_temp = {
+ .name = "vexpress_temp",
+ .attr_groups = (const struct attribute_group *[]) {
+ &vexpress_hwmon_group_temp,
+ NULL
+ },
+};
static DEVICE_ATTR(power1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, vexpress_hwmon_u32_show,
NULL, 1);
static VEXPRESS_HWMON_ATTRS(power, power1_label, power1_input);
static struct attribute_group vexpress_hwmon_group_power = {
+ .is_visible = vexpress_hwmon_attr_is_visible,
.attrs = vexpress_hwmon_attrs_power,
};
+static struct vexpress_hwmon_type vexpress_hwmon_power = {
+ .name = "vexpress_power",
+ .attr_groups = (const struct attribute_group *[]) {
+ &vexpress_hwmon_group_power,
+ NULL
+ },
+};
static DEVICE_ATTR(energy1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(energy1_input, S_IRUGO, vexpress_hwmon_u64_show,
NULL, 1);
static VEXPRESS_HWMON_ATTRS(energy, energy1_label, energy1_input);
static struct attribute_group vexpress_hwmon_group_energy = {
+ .is_visible = vexpress_hwmon_attr_is_visible,
.attrs = vexpress_hwmon_attrs_energy,
};
+static struct vexpress_hwmon_type vexpress_hwmon_energy = {
+ .name = "vexpress_energy",
+ .attr_groups = (const struct attribute_group *[]) {
+ &vexpress_hwmon_group_energy,
+ NULL
+ },
+};
static struct of_device_id vexpress_hwmon_of_match[] = {
#if !defined(CONFIG_REGULATOR_VEXPRESS)
{
.compatible = "arm,vexpress-volt",
- .data = &vexpress_hwmon_group_volt,
+ .data = &vexpress_hwmon_volt,
},
#endif
{
.compatible = "arm,vexpress-amp",
- .data = &vexpress_hwmon_group_amp,
+ .data = &vexpress_hwmon_amp,
}, {
.compatible = "arm,vexpress-temp",
- .data = &vexpress_hwmon_group_temp,
+ .data = &vexpress_hwmon_temp,
}, {
.compatible = "arm,vexpress-power",
- .data = &vexpress_hwmon_group_power,
+ .data = &vexpress_hwmon_power,
}, {
.compatible = "arm,vexpress-energy",
- .data = &vexpress_hwmon_group_energy,
+ .data = &vexpress_hwmon_energy,
},
{}
};
int err;
const struct of_device_id *match;
struct vexpress_hwmon_data *data;
+ const struct vexpress_hwmon_type *type;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
match = of_match_device(vexpress_hwmon_of_match, &pdev->dev);
if (!match)
return -ENODEV;
+ type = match->data;
+ data->name = type->name;
data->func = vexpress_config_func_get_by_dev(&pdev->dev);
if (!data->func)
return -ENODEV;
- err = sysfs_create_group(&pdev->dev.kobj, match->data);
+ err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups);
if (err)
goto error;
if (package_num + 1 > num_sockets) {
num_sockets = package_num + 1;
- if (num_sockets > 4)
+ if (num_sockets > 4) {
cpuidle_state_table = ivt_cstates_8s;
return;
+ }
}
}
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
-#include <mach/at91_adc.h>
+/* Registers */
+#define AT91_ADC_CR 0x00 /* Control Register */
+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
+#define AT91_ADC_START (1 << 1) /* Start Conversion */
+
+#define AT91_ADC_MR 0x04 /* Mode Register */
+#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */
+#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */
+#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */
+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
+#define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */
+#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */
+#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
+#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */
+#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
+#define AT91_ADC_STARTUP_9X5 (0xf << 16)
+#define AT91_ADC_STARTUP_(x) ((x) << 16)
+#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_SHTIM_(x) ((x) << 24)
+#define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_PENDBC_(x) ((x) << 28)
+
+#define AT91_ADC_TSR 0x0C
+#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24)
+
+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
+#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
+
+#define AT91_ADC_SR 0x1C /* Status Register */
+#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+
+#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
+#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
+
+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
+#define AT91_ADC_LDATA (0x3ff)
+
+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
+#define AT91RL_ADC_IER_PEN (1 << 20)
+#define AT91RL_ADC_IER_NOPEN (1 << 21)
+#define AT91_ADC_IER_PEN (1 << 29)
+#define AT91_ADC_IER_NOPEN (1 << 30)
+#define AT91_ADC_IER_XRDY (1 << 20)
+#define AT91_ADC_IER_YRDY (1 << 21)
+#define AT91_ADC_IER_PRDY (1 << 22)
+#define AT91_ADC_ISR_PENS (1 << 31)
+
+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
+#define AT91_ADC_DATA (0x3ff)
+
+#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
+
+#define AT91_ADC_ACR 0x94 /* Analog Control Register */
+#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */
+
+#define AT91_ADC_TSMR 0xB0
+#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */
+#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
+#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
+#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
+#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
+#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */
+#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
+#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */
+#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */
+#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR 0xB4
+#define AT91_ADC_TSYPOSR 0xB8
+#define AT91_ADC_TSPRESSR 0xBC
+
+#define AT91_ADC_TRGR_9260 AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45 0x08
+#define AT91_ADC_TRGR_9X5 0xC0
+
+/* Trigger Register bit field */
+#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
+#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
+#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
+#define AT91_ADC_TRGR_NONE (0 << 0)
+#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
#define AT91_ADC_CHAN(st, ch) \
(st->registers->channel_base + (ch * 4))
#define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */
#define TOUCH_PEN_DETECT_DEBOUNCE_US 200
+#define MAX_RLPOS_BITS 10
+#define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */
+#define TOUCH_SHTIM 0xa
+
+/**
+ * struct at91_adc_reg_desc - Various informations relative to registers
+ * @channel_base: Base offset for the channel data registers
+ * @drdy_mask: Mask of the DRDY field in the relevant registers
+ (Interruptions registers mostly)
+ * @status_register: Offset of the Interrupt Status Register
+ * @trigger_register: Offset of the Trigger setup register
+ * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register
+ * @mr_startup_mask: Mask of the STARTUP field in the adc MR register
+ */
+struct at91_adc_reg_desc {
+ u8 channel_base;
+ u32 drdy_mask;
+ u8 status_register;
+ u8 trigger_register;
+ u32 mr_prescal_mask;
+ u32 mr_startup_mask;
+};
+
struct at91_adc_caps {
bool has_ts; /* Support touch screen */
bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */
struct at91_adc_reg_desc registers;
};
-enum atmel_adc_ts_type {
- ATMEL_ADC_TOUCHSCREEN_NONE = 0,
- ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
- ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
-};
-
struct at91_adc_state {
struct clk *adc_clk;
u16 *buffer;
u16 ts_sample_period_val;
u32 ts_pressure_threshold;
+ u16 ts_pendbc;
+
+ bool ts_bufferedmeasure;
+ u32 ts_prev_absx;
+ u32 ts_prev_absy;
};
static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
return 0;
}
-static irqreturn_t at91_adc_interrupt(int irq, void *private)
+static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
+{
+ struct iio_dev *idev = private;
+ struct at91_adc_state *st = iio_priv(idev);
+ u32 status = at91_adc_readl(st, st->registers->status_register);
+ unsigned int reg;
+
+ status &= at91_adc_readl(st, AT91_ADC_IMR);
+ if (status & st->registers->drdy_mask)
+ handle_adc_eoc_trigger(irq, idev);
+
+ if (status & AT91RL_ADC_IER_PEN) {
+ /* Disabling pen debounce is required to get a NOPEN irq */
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg &= ~AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ /* Set up period trigger for sampling */
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_MOD_PERIOD_TRIG |
+ AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val));
+ } else if (status & AT91RL_ADC_IER_NOPEN) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_NONE);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
+ st->ts_bufferedmeasure = false;
+ input_report_key(st->ts_input, BTN_TOUCH, 0);
+ input_sync(st->ts_input);
+ } else if (status & AT91_ADC_EOC(3)) {
+ /* Conversion finished */
+ if (st->ts_bufferedmeasure) {
+ /*
+ * Last measurement is always discarded, since it can
+ * be erroneous.
+ * Always report previous measurement
+ */
+ input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx);
+ input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy);
+ input_report_key(st->ts_input, BTN_TOUCH, 1);
+ input_sync(st->ts_input);
+ } else
+ st->ts_bufferedmeasure = true;
+
+ /* Now make new measurement */
+ st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2));
+
+ st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
{
struct iio_dev *idev = private;
struct at91_adc_state *st = iio_priv(idev);
return -EINVAL;
}
+ if (!st->caps->has_tsmr)
+ return 0;
prop = 0;
of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop);
st->ts_pressure_threshold = prop;
if (!pdata)
return -EINVAL;
+ st->caps = (struct at91_adc_caps *)
+ platform_get_device_id(pdev)->driver_data;
+
st->use_external = pdata->use_external_triggers;
st->vref_mv = pdata->vref;
st->channels_mask = pdata->channels_used;
- st->num_channels = pdata->num_channels;
+ st->num_channels = st->caps->num_channels;
st->startup_time = pdata->startup_time;
st->trigger_number = pdata->trigger_number;
st->trigger_list = pdata->trigger_list;
- st->registers = pdata->registers;
+ st->registers = &st->caps->registers;
+ st->touchscreen_type = pdata->touchscreen_type;
return 0;
}
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
return 0;
}
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
}
static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
{
- u32 reg = 0, pendbc;
+ u32 reg = 0;
int i = 0;
- if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
- reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
- else
- reg = AT91_ADC_TSMR_TSMODE_5WIRE;
-
/* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid
* pen detect noise.
* The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock
*/
- pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1000, 1);
+ st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz /
+ 1000, 1);
- while (pendbc >> ++i)
+ while (st->ts_pendbc >> ++i)
; /* Empty! Find the shift offset */
- if (abs(pendbc - (1 << i)) < abs(pendbc - (1 << (i - 1))))
- pendbc = i;
+ if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1))))
+ st->ts_pendbc = i;
else
- pendbc = i - 1;
+ st->ts_pendbc = i - 1;
- if (st->caps->has_tsmr) {
- reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
- & AT91_ADC_TSMR_TSAV;
- reg |= AT91_ADC_TSMR_PENDBC_(pendbc) & AT91_ADC_TSMR_PENDBC;
- reg |= AT91_ADC_TSMR_NOTSDMA;
- reg |= AT91_ADC_TSMR_PENDET_ENA;
- reg |= 0x03 << 8; /* TSFREQ, need bigger than TSAV */
-
- at91_adc_writel(st, AT91_ADC_TSMR, reg);
- } else {
- /* TODO: for 9g45 which has no TSMR */
+ if (!st->caps->has_tsmr) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET;
+
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM;
+ at91_adc_writel(st, AT91_ADC_TSR, reg);
+
+ st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL *
+ adc_clk_khz / 1000) - 1, 1);
+
+ return 0;
}
+ if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
+ reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
+ else
+ reg = AT91_ADC_TSMR_TSMODE_5WIRE;
+
+ reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
+ & AT91_ADC_TSMR_TSAV;
+ reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC;
+ reg |= AT91_ADC_TSMR_NOTSDMA;
+ reg |= AT91_ADC_TSMR_PENDET_ENA;
+ reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */
+
+ at91_adc_writel(st, AT91_ADC_TSMR, reg);
+
/* Change adc internal resistor value for better pen detection,
* default value is 100 kOhm.
* 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm
at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity
& AT91_ADC_ACR_PENDETSENS);
- /* Sample Peroid Time = (TRGPER + 1) / ADCClock */
+ /* Sample Period Time = (TRGPER + 1) / ADCClock */
st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US *
adc_clk_khz / 1000) - 1, 1);
__set_bit(EV_ABS, input->evbit);
__set_bit(EV_KEY, input->evbit);
__set_bit(BTN_TOUCH, input->keybit);
- input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ if (st->caps->has_tsmr) {
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ } else {
+ if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) {
+ dev_err(&pdev->dev,
+ "This touchscreen controller only support 4 wires\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ }
st->ts_input = input;
input_set_drvdata(input, st);
ret = input_register_device(input);
if (ret)
- input_free_device(st->ts_input);
+ goto err;
+
+ return ret;
+err:
+ input_free_device(st->ts_input);
return ret;
}
*/
at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST);
at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF);
- ret = request_irq(st->irq,
- at91_adc_interrupt,
- 0,
- pdev->dev.driver->name,
- idev);
+
+ if (st->caps->has_tsmr)
+ ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0,
+ pdev->dev.driver->name, idev);
+ else
+ ret = request_irq(st->irq, at91_adc_rl_interrupt, 0,
+ pdev->dev.driver->name, idev);
if (ret) {
dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
return ret;
* the best converted final value between two channels selection
* The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock
*/
- shtim = round_up((st->sample_hold_time * adc_clk_khz /
- 1000) - 1, 1);
+ if (st->sample_hold_time > 0)
+ shtim = round_up((st->sample_hold_time * adc_clk_khz / 1000)
+ - 1, 1);
+ else
+ shtim = 0;
reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask;
reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask;
goto error_disable_adc_clk;
}
} else {
- if (!st->caps->has_tsmr) {
- dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
- ret = -ENODEV;
- goto error_disable_adc_clk;
- }
-
ret = at91_ts_register(st, pdev);
if (ret)
goto error_disable_adc_clk;
return 0;
}
-#ifdef CONFIG_OF
static struct at91_adc_caps at91sam9260_caps = {
.calc_startup_ticks = calc_startup_ticks_9260,
.num_channels = 4,
},
};
+static struct at91_adc_caps at91sam9rl_caps = {
+ .has_ts = true,
+ .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
+ .num_channels = 6,
+ .registers = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = AT91_ADC_TRGR_9G45,
+ .mr_prescal_mask = AT91_ADC_PRESCAL_9260,
+ .mr_startup_mask = AT91_ADC_STARTUP_9G45,
+ },
+};
+
static struct at91_adc_caps at91sam9g45_caps = {
.has_ts = true,
.calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
static const struct of_device_id at91_adc_dt_ids[] = {
{ .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps },
+ { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps },
{ .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps },
{ .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps },
{},
};
MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
-#endif
+
+static const struct platform_device_id at91_adc_ids[] = {
+ {
+ .name = "at91sam9260-adc",
+ .driver_data = (unsigned long)&at91sam9260_caps,
+ }, {
+ .name = "at91sam9rl-adc",
+ .driver_data = (unsigned long)&at91sam9rl_caps,
+ }, {
+ .name = "at91sam9g45-adc",
+ .driver_data = (unsigned long)&at91sam9g45_caps,
+ }, {
+ .name = "at91sam9x5-adc",
+ .driver_data = (unsigned long)&at91sam9x5_caps,
+ }, {
+ /* terminator */
+ }
+};
+MODULE_DEVICE_TABLE(platform, at91_adc_ids);
static struct platform_driver at91_adc_driver = {
.probe = at91_adc_probe,
.remove = at91_adc_remove,
+ .id_table = at91_adc_ids,
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(at91_adc_dt_ids),
int ret;
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- ret = test_bit(to_iio_dev_attr(attr)->address,
+ /* Ensure ret is 0 or 1. */
+ ret = !!test_bit(to_iio_dev_attr(attr)->address,
indio_dev->buffer->scan_mask);
return sprintf(buf, "%d\n", ret);
if (!buffer->scan_mask)
return 0;
- return test_bit(bit, buffer->scan_mask);
+ /* Ensure return value is 0 or 1. */
+ return !!test_bit(bit, buffer->scan_mask);
};
EXPORT_SYMBOL_GPL(iio_scan_mask_query);
*val = cm32181->calibscale;
return IIO_VAL_INT;
case IIO_CHAN_INFO_INT_TIME:
+ *val = 0;
ret = cm32181_read_als_it(cm32181, val2);
return ret;
}
cm36651->client = client;
cm36651->ps_client = i2c_new_dummy(client->adapter,
CM36651_I2C_ADDR_PS);
+ if (!cm36651->ps_client) {
+ dev_err(&client->dev, "%s: new i2c device failed\n", __func__);
+ ret = -ENODEV;
+ goto error_disable_reg;
+ }
+
cm36651->ara_client = i2c_new_dummy(client->adapter, CM36651_ARA);
+ if (!cm36651->ara_client) {
+ dev_err(&client->dev, "%s: new i2c device failed\n", __func__);
+ ret = -ENODEV;
+ goto error_i2c_unregister_ps;
+ }
+
mutex_init(&cm36651->lock);
indio_dev->dev.parent = &client->dev;
indio_dev->channels = cm36651_channels;
ret = cm36651_setup_reg(cm36651);
if (ret) {
dev_err(&client->dev, "%s: register setup failed\n", __func__);
- goto error_disable_reg;
+ goto error_i2c_unregister_ara;
}
ret = request_threaded_irq(client->irq, NULL, cm36651_irq_handler,
"cm36651", indio_dev);
if (ret) {
dev_err(&client->dev, "%s: request irq failed\n", __func__);
- goto error_disable_reg;
+ goto error_i2c_unregister_ara;
}
ret = iio_device_register(indio_dev);
error_free_irq:
free_irq(client->irq, indio_dev);
+error_i2c_unregister_ara:
+ i2c_unregister_device(cm36651->ara_client);
+error_i2c_unregister_ps:
+ i2c_unregister_device(cm36651->ps_client);
error_disable_reg:
regulator_disable(cm36651->vled_reg);
return ret;
iio_device_unregister(indio_dev);
regulator_disable(cm36651->vled_reg);
free_irq(client->irq, indio_dev);
+ i2c_unregister_device(cm36651->ps_client);
+ i2c_unregister_device(cm36651->ara_client);
return 0;
}
config INFINIBAND_CXGB4
- tristate "Chelsio T4 RDMA Driver"
+ tristate "Chelsio T4/T5 RDMA Driver"
depends on CHELSIO_T4 && INET && (IPV6 || IPV6=n)
select GENERIC_ALLOCATOR
---help---
- This is an iWARP/RDMA driver for the Chelsio T4 1GbE and
- 10GbE adapters.
+ This is an iWARP/RDMA driver for the Chelsio T4 and T5
+ 1GbE, 10GbE adapters and T5 40GbE adapter.
For general information about Chelsio and our products, visit
our website at <http://www.chelsio.com>.
opt2 |= SACK_EN(1);
if (wscale && enable_tcp_window_scaling)
opt2 |= WND_SCALE_EN(1);
+ if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) {
+ opt2 |= T5_OPT_2_VALID;
+ opt2 |= V_CONG_CNTRL(CONG_ALG_TAHOE);
+ }
t4_set_arp_err_handler(skb, NULL, act_open_req_arp_failure);
if (is_t4(ep->com.dev->rdev.lldi.adapter_type)) {
static int abort_connection(struct c4iw_ep *ep, struct sk_buff *skb, gfp_t gfp)
{
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
- state_set(&ep->com, ABORTING);
+ __state_set(&ep->com, ABORTING);
set_bit(ABORT_CONN, &ep->com.history);
return send_abort(ep, skb, gfp);
}
return credits;
}
-static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
+static int process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
{
struct mpa_message *mpa;
struct mpa_v2_conn_params *mpa_v2_params;
struct c4iw_qp_attributes attrs;
enum c4iw_qp_attr_mask mask;
int err;
+ int disconnect = 0;
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
* will abort the connection.
*/
if (stop_ep_timer(ep))
- return;
+ return 0;
/*
* If we get more than the supported amount of private data
* if we don't even have the mpa message, then bail.
*/
if (ep->mpa_pkt_len < sizeof(*mpa))
- return;
+ return 0;
mpa = (struct mpa_message *) ep->mpa_pkt;
/* Validate MPA header. */
* We'll continue process when more data arrives.
*/
if (ep->mpa_pkt_len < (sizeof(*mpa) + plen))
- return;
+ return 0;
if (mpa->flags & MPA_REJECT) {
err = -ECONNREFUSED;
attrs.layer_etype = LAYER_MPA | DDP_LLP;
attrs.ecode = MPA_NOMATCH_RTR;
attrs.next_state = C4IW_QP_STATE_TERMINATE;
+ attrs.send_term = 1;
err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
- C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
+ C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
err = -ENOMEM;
+ disconnect = 1;
goto out;
}
attrs.layer_etype = LAYER_MPA | DDP_LLP;
attrs.ecode = MPA_INSUFF_IRD;
attrs.next_state = C4IW_QP_STATE_TERMINATE;
+ attrs.send_term = 1;
err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
- C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
+ C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
err = -ENOMEM;
+ disconnect = 1;
goto out;
}
goto out;
send_abort(ep, skb, GFP_KERNEL);
out:
connect_reply_upcall(ep, err);
- return;
+ return disconnect;
}
static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
unsigned int tid = GET_TID(hdr);
struct tid_info *t = dev->rdev.lldi.tids;
__u8 status = hdr->status;
+ int disconnect = 0;
ep = lookup_tid(t, tid);
if (!ep)
switch (ep->com.state) {
case MPA_REQ_SENT:
ep->rcv_seq += dlen;
- process_mpa_reply(ep, skb);
+ disconnect = process_mpa_reply(ep, skb);
break;
case MPA_REQ_WAIT:
ep->rcv_seq += dlen;
ep->com.state, ep->hwtid, status);
attrs.next_state = C4IW_QP_STATE_TERMINATE;
c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
- C4IW_QP_ATTR_NEXT_STATE, &attrs, 0);
+ C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
+ disconnect = 1;
break;
}
default:
break;
}
mutex_unlock(&ep->com.mutex);
+ if (disconnect)
+ c4iw_ep_disconnect(ep, 0, GFP_KERNEL);
return 0;
}
if (tcph->ece && tcph->cwr)
opt2 |= CCTRL_ECN(1);
}
+ if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) {
+ opt2 |= T5_OPT_2_VALID;
+ opt2 |= V_CONG_CNTRL(CONG_ALG_TAHOE);
+ }
rpl = cplhdr(skb);
INIT_TP_WR(rpl, ep->hwtid);
__func__, ep, ep->hwtid, ep->com.state);
abort = 0;
}
- mutex_unlock(&ep->com.mutex);
if (abort)
abort_connection(ep, NULL, GFP_KERNEL);
+ mutex_unlock(&ep->com.mutex);
c4iw_put_ep(&ep->com);
}
u8 ecode;
u16 sq_db_inc;
u16 rq_db_inc;
+ u8 send_term;
};
struct c4iw_qp {
qhp->attr.layer_etype = attrs->layer_etype;
qhp->attr.ecode = attrs->ecode;
ep = qhp->ep;
- disconnect = 1;
- c4iw_get_ep(&qhp->ep->com);
- if (!internal)
+ if (!internal) {
+ c4iw_get_ep(&qhp->ep->com);
terminate = 1;
- else {
+ disconnect = 1;
+ } else {
+ terminate = qhp->attr.send_term;
ret = rdma_fini(rhp, qhp, ep);
if (ret)
goto err;
/*
* Use SQ_PSN and RQ_PSN to pass in IDX_INC values for
* ringing the queue db when we're in DB_FULL mode.
+ * Only allow this on T4 devices.
*/
attrs.sq_db_inc = attr->sq_psn;
attrs.rq_db_inc = attr->rq_psn;
mask |= (attr_mask & IB_QP_SQ_PSN) ? C4IW_QP_ATTR_SQ_DB : 0;
mask |= (attr_mask & IB_QP_RQ_PSN) ? C4IW_QP_ATTR_RQ_DB : 0;
+ if (is_t5(to_c4iw_qp(ibqp)->rhp->rdev.lldi.adapter_type) &&
+ (mask & (C4IW_QP_ATTR_SQ_DB|C4IW_QP_ATTR_RQ_DB)))
+ return -EINVAL;
return c4iw_modify_qp(rhp, qhp, mask, &attrs, 0);
}
#define V_RX_DACK_CHANGE(x) ((x) << S_RX_DACK_CHANGE)
#define F_RX_DACK_CHANGE V_RX_DACK_CHANGE(1U)
+enum { /* TCP congestion control algorithms */
+ CONG_ALG_RENO,
+ CONG_ALG_TAHOE,
+ CONG_ALG_NEWRENO,
+ CONG_ALG_HIGHSPEED
+};
+
+#define S_CONG_CNTRL 14
+#define M_CONG_CNTRL 0x3
+#define V_CONG_CNTRL(x) ((x) << S_CONG_CNTRL)
+#define G_CONG_CNTRL(x) (((x) >> S_CONG_CNTRL) & M_CONG_CNTRL)
+
+#define T5_OPT_2_VALID (1 << 31)
+
#endif /* _T4FW_RI_API_H_ */
INIT_DELAYED_WORK(&onkey->work, da9055_onkey_work);
- irq = regmap_irq_get_virq(da9055->irq_data, irq);
err = request_threaded_irq(irq, NULL, da9055_onkey_irq,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"ONKEY", onkey);
soc_button_remove(pdev);
return error;
}
+ continue;
}
priv->children[i] = pd;
case 6:
case 7:
case 8:
+ case 9:
etd->hw_version = 4;
break;
default:
}
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS
+/* This list has been kindly provided by Synaptics. */
+static const char * const topbuttonpad_pnp_ids[] = {
+ "LEN0017",
+ "LEN0018",
+ "LEN0019",
+ "LEN0023",
+ "LEN002A",
+ "LEN002B",
+ "LEN002C",
+ "LEN002D",
+ "LEN002E",
+ "LEN0033", /* Helix */
+ "LEN0034", /* T431s, T540, X1 Carbon 2nd */
+ "LEN0035", /* X240 */
+ "LEN0036", /* T440 */
+ "LEN0037",
+ "LEN0038",
+ "LEN0041",
+ "LEN0042", /* Yoga */
+ "LEN0045",
+ "LEN0046",
+ "LEN0047",
+ "LEN0048",
+ "LEN0049",
+ "LEN2000",
+ "LEN2001",
+ "LEN2002",
+ "LEN2003",
+ "LEN2004", /* L440 */
+ "LEN2005",
+ "LEN2006",
+ "LEN2007",
+ "LEN2008",
+ "LEN2009",
+ "LEN200A",
+ "LEN200B",
+ NULL
+};
/*****************************************************************************
* Synaptics communications functions
input_abs_set_res(dev, y_code, priv->y_res);
}
-static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
+static void set_input_params(struct psmouse *psmouse,
+ struct synaptics_data *priv)
{
+ struct input_dev *dev = psmouse->dev;
int i;
/* Things that apply to both modes */
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
+ /* See if this buttonpad has a top button area */
+ if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4)) {
+ for (i = 0; topbuttonpad_pnp_ids[i]; i++) {
+ if (strstr(psmouse->ps2dev.serio->firmware_id,
+ topbuttonpad_pnp_ids[i])) {
+ __set_bit(INPUT_PROP_TOPBUTTONPAD,
+ dev->propbit);
+ break;
+ }
+ }
+ }
/* Clickpads report only left button */
__clear_bit(BTN_RIGHT, dev->keybit);
__clear_bit(BTN_MIDDLE, dev->keybit);
},
.driver_data = (int []){1232, 5710, 1156, 4696},
},
+ {
+ /* Lenovo ThinkPad T431s */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T431"),
+ },
+ .driver_data = (int []){1024, 5112, 2024, 4832},
+ },
{
/* Lenovo ThinkPad T440s */
.matches = {
},
.driver_data = (int []){1024, 5112, 2024, 4832},
},
+ {
+ /* Lenovo ThinkPad L440 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L440"),
+ },
+ .driver_data = (int []){1024, 5112, 2024, 4832},
+ },
{
/* Lenovo ThinkPad T540p */
.matches = {
},
.driver_data = (int []){1024, 5056, 2058, 4832},
},
+ {
+ /* Lenovo ThinkPad L540 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L540"),
+ },
+ .driver_data = (int []){1024, 5112, 2024, 4832},
+ },
+ {
+ /* Lenovo Yoga S1 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_VERSION,
+ "ThinkPad S1 Yoga"),
+ },
+ .driver_data = (int []){1232, 5710, 1156, 4696},
+ },
+ {
+ /* Lenovo ThinkPad X1 Carbon Haswell (3rd generation) */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION,
+ "ThinkPad X1 Carbon 2nd"),
+ },
+ .driver_data = (int []){1024, 5112, 2024, 4832},
+ },
#endif
{ }
};
priv->capabilities, priv->ext_cap, priv->ext_cap_0c,
priv->board_id, priv->firmware_id);
- set_input_params(psmouse->dev, priv);
+ set_input_params(psmouse, priv);
/*
* Encode touchpad model so that it can be used to set
static char i8042_pnp_kbd_name[32];
static char i8042_pnp_aux_name[32];
+static void i8042_pnp_id_to_string(struct pnp_id *id, char *dst, int dst_size)
+{
+ strlcpy(dst, "PNP:", dst_size);
+
+ while (id) {
+ strlcat(dst, " ", dst_size);
+ strlcat(dst, id->id, dst_size);
+ id = id->next;
+ }
+}
+
static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
{
if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1)
strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name));
strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name));
}
+ i8042_pnp_id_to_string(dev->id, i8042_kbd_firmware_id,
+ sizeof(i8042_kbd_firmware_id));
/* Keyboard ports are always supposed to be wakeup-enabled */
device_set_wakeup_enable(&dev->dev, true);
strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name));
strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name));
}
+ i8042_pnp_id_to_string(dev->id, i8042_aux_firmware_id,
+ sizeof(i8042_aux_firmware_id));
i8042_pnp_aux_devices++;
return 0;
#endif
static bool i8042_bypass_aux_irq_test;
+static char i8042_kbd_firmware_id[128];
+static char i8042_aux_firmware_id[128];
#include "i8042.h"
serio->dev.parent = &i8042_platform_device->dev;
strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
+ strlcpy(serio->firmware_id, i8042_kbd_firmware_id,
+ sizeof(serio->firmware_id));
port->serio = serio;
port->irq = I8042_KBD_IRQ;
if (idx < 0) {
strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+ strlcpy(serio->firmware_id, i8042_aux_firmware_id,
+ sizeof(serio->firmware_id));
serio->close = i8042_port_close;
} else {
snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
return retval;
}
+static ssize_t firmware_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct serio *serio = to_serio_port(dev);
+
+ return sprintf(buf, "%s\n", serio->firmware_id);
+}
+
static DEVICE_ATTR_RO(type);
static DEVICE_ATTR_RO(proto);
static DEVICE_ATTR_RO(id);
static DEVICE_ATTR_WO(drvctl);
static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL);
static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode);
+static DEVICE_ATTR_RO(firmware_id);
static struct attribute *serio_device_attrs[] = {
&dev_attr_modalias.attr,
&dev_attr_description.attr,
&dev_attr_drvctl.attr,
&dev_attr_bind_mode.attr,
+ &dev_attr_firmware_id.attr,
NULL
};
SERIO_ADD_UEVENT_VAR("SERIO_PROTO=%02x", serio->id.proto);
SERIO_ADD_UEVENT_VAR("SERIO_ID=%02x", serio->id.id);
SERIO_ADD_UEVENT_VAR("SERIO_EXTRA=%02x", serio->id.extra);
+
SERIO_ADD_UEVENT_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X",
serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
+ if (serio->firmware_id[0])
+ SERIO_ADD_UEVENT_VAR("SERIO_FIRMWARE_ID=%s",
+ serio->firmware_id);
+
return 0;
}
#undef SERIO_ADD_UEVENT_VAR
#define HID_USAGE_PAGE_DIGITIZER 0x0d
#define HID_USAGE_PAGE_DESKTOP 0x01
#define HID_USAGE 0x09
-#define HID_USAGE_X 0x30
-#define HID_USAGE_Y 0x31
-#define HID_USAGE_X_TILT 0x3d
-#define HID_USAGE_Y_TILT 0x3e
-#define HID_USAGE_FINGER 0x22
-#define HID_USAGE_STYLUS 0x20
-#define HID_USAGE_CONTACTMAX 0x55
+#define HID_USAGE_X ((HID_USAGE_PAGE_DESKTOP << 16) | 0x30)
+#define HID_USAGE_Y ((HID_USAGE_PAGE_DESKTOP << 16) | 0x31)
+#define HID_USAGE_PRESSURE ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x30)
+#define HID_USAGE_X_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3d)
+#define HID_USAGE_Y_TILT ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x3e)
+#define HID_USAGE_FINGER ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x22)
+#define HID_USAGE_STYLUS ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x20)
+#define HID_USAGE_CONTACTMAX ((HID_USAGE_PAGE_DIGITIZER << 16) | 0x55)
#define HID_COLLECTION 0xa1
#define HID_COLLECTION_LOGICAL 0x02
#define HID_COLLECTION_END 0xc0
-enum {
- WCM_UNDEFINED = 0,
- WCM_DESKTOP,
- WCM_DIGITIZER,
-};
-
struct hid_descriptor {
struct usb_descriptor_header header;
__le16 bcdHID;
char limit = 0;
/* result has to be defined as int for some devices */
int result = 0, touch_max = 0;
- int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+ int i = 0, page = 0, finger = 0, pen = 0;
unsigned char *report;
report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
switch (report[i]) {
case HID_USAGE_PAGE:
- switch (report[i + 1]) {
- case HID_USAGE_PAGE_DIGITIZER:
- usage = WCM_DIGITIZER;
- i++;
- break;
-
- case HID_USAGE_PAGE_DESKTOP:
- usage = WCM_DESKTOP;
- i++;
- break;
- }
+ page = report[i + 1];
+ i++;
break;
case HID_USAGE:
- switch (report[i + 1]) {
+ switch (page << 16 | report[i + 1]) {
case HID_USAGE_X:
- if (usage == WCM_DESKTOP) {
- if (finger) {
- features->device_type = BTN_TOOL_FINGER;
- /* touch device at least supports one touch point */
- touch_max = 1;
- switch (features->type) {
- case TABLETPC2FG:
- features->pktlen = WACOM_PKGLEN_TPC2FG;
- break;
-
- case MTSCREEN:
- case WACOM_24HDT:
- features->pktlen = WACOM_PKGLEN_MTOUCH;
- break;
-
- case MTTPC:
- features->pktlen = WACOM_PKGLEN_MTTPC;
- break;
-
- case BAMBOO_PT:
- features->pktlen = WACOM_PKGLEN_BBTOUCH;
- break;
-
- default:
- features->pktlen = WACOM_PKGLEN_GRAPHIRE;
- break;
- }
-
- switch (features->type) {
- case BAMBOO_PT:
- features->x_phy =
- get_unaligned_le16(&report[i + 5]);
- features->x_max =
- get_unaligned_le16(&report[i + 8]);
- i += 15;
- break;
-
- case WACOM_24HDT:
- features->x_max =
- get_unaligned_le16(&report[i + 3]);
- features->x_phy =
- get_unaligned_le16(&report[i + 8]);
- features->unit = report[i - 1];
- features->unitExpo = report[i - 3];
- i += 12;
- break;
-
- default:
- features->x_max =
- get_unaligned_le16(&report[i + 3]);
- features->x_phy =
- get_unaligned_le16(&report[i + 6]);
- features->unit = report[i + 9];
- features->unitExpo = report[i + 11];
- i += 12;
- break;
- }
- } else if (pen) {
- /* penabled only accepts exact bytes of data */
- if (features->type >= TABLETPC)
- features->pktlen = WACOM_PKGLEN_GRAPHIRE;
- features->device_type = BTN_TOOL_PEN;
+ if (finger) {
+ features->device_type = BTN_TOOL_FINGER;
+ /* touch device at least supports one touch point */
+ touch_max = 1;
+ switch (features->type) {
+ case TABLETPC2FG:
+ features->pktlen = WACOM_PKGLEN_TPC2FG;
+ break;
+
+ case MTSCREEN:
+ case WACOM_24HDT:
+ features->pktlen = WACOM_PKGLEN_MTOUCH;
+ break;
+
+ case MTTPC:
+ features->pktlen = WACOM_PKGLEN_MTTPC;
+ break;
+
+ case BAMBOO_PT:
+ features->pktlen = WACOM_PKGLEN_BBTOUCH;
+ break;
+
+ default:
+ features->pktlen = WACOM_PKGLEN_GRAPHIRE;
+ break;
+ }
+
+ switch (features->type) {
+ case BAMBOO_PT:
+ features->x_phy =
+ get_unaligned_le16(&report[i + 5]);
+ features->x_max =
+ get_unaligned_le16(&report[i + 8]);
+ i += 15;
+ break;
+
+ case WACOM_24HDT:
features->x_max =
get_unaligned_le16(&report[i + 3]);
- i += 4;
+ features->x_phy =
+ get_unaligned_le16(&report[i + 8]);
+ features->unit = report[i - 1];
+ features->unitExpo = report[i - 3];
+ i += 12;
+ break;
+
+ default:
+ features->x_max =
+ get_unaligned_le16(&report[i + 3]);
+ features->x_phy =
+ get_unaligned_le16(&report[i + 6]);
+ features->unit = report[i + 9];
+ features->unitExpo = report[i + 11];
+ i += 12;
+ break;
}
+ } else if (pen) {
+ /* penabled only accepts exact bytes of data */
+ if (features->type >= TABLETPC)
+ features->pktlen = WACOM_PKGLEN_GRAPHIRE;
+ features->device_type = BTN_TOOL_PEN;
+ features->x_max =
+ get_unaligned_le16(&report[i + 3]);
+ i += 4;
}
break;
case HID_USAGE_Y:
- if (usage == WCM_DESKTOP) {
- if (finger) {
- switch (features->type) {
- case TABLETPC2FG:
- case MTSCREEN:
- case MTTPC:
- features->y_max =
- get_unaligned_le16(&report[i + 3]);
- features->y_phy =
- get_unaligned_le16(&report[i + 6]);
- i += 7;
- break;
-
- case WACOM_24HDT:
- features->y_max =
- get_unaligned_le16(&report[i + 3]);
- features->y_phy =
- get_unaligned_le16(&report[i - 2]);
- i += 7;
- break;
-
- case BAMBOO_PT:
- features->y_phy =
- get_unaligned_le16(&report[i + 3]);
- features->y_max =
- get_unaligned_le16(&report[i + 6]);
- i += 12;
- break;
-
- default:
- features->y_max =
- features->x_max;
- features->y_phy =
- get_unaligned_le16(&report[i + 3]);
- i += 4;
- break;
- }
- } else if (pen) {
+ if (finger) {
+ switch (features->type) {
+ case TABLETPC2FG:
+ case MTSCREEN:
+ case MTTPC:
+ features->y_max =
+ get_unaligned_le16(&report[i + 3]);
+ features->y_phy =
+ get_unaligned_le16(&report[i + 6]);
+ i += 7;
+ break;
+
+ case WACOM_24HDT:
+ features->y_max =
+ get_unaligned_le16(&report[i + 3]);
+ features->y_phy =
+ get_unaligned_le16(&report[i - 2]);
+ i += 7;
+ break;
+
+ case BAMBOO_PT:
+ features->y_phy =
+ get_unaligned_le16(&report[i + 3]);
+ features->y_max =
+ get_unaligned_le16(&report[i + 6]);
+ i += 12;
+ break;
+
+ default:
features->y_max =
+ features->x_max;
+ features->y_phy =
get_unaligned_le16(&report[i + 3]);
i += 4;
+ break;
}
+ } else if (pen) {
+ features->y_max =
+ get_unaligned_le16(&report[i + 3]);
+ i += 4;
}
break;
wacom_retrieve_report_data(intf, features);
i++;
break;
+
+ case HID_USAGE_PRESSURE:
+ if (pen) {
+ features->pressure_max =
+ get_unaligned_le16(&report[i + 3]);
+ i += 4;
+ }
+ break;
}
break;
case HID_COLLECTION_END:
/* reset UsagePage and Finger */
- finger = usage = 0;
+ finger = page = 0;
break;
case HID_COLLECTION:
static int wacom_dtu_irq(struct wacom_wac *wacom)
{
- struct wacom_features *features = &wacom->features;
- char *data = wacom->data;
+ unsigned char *data = wacom->data;
struct input_dev *input = wacom->input;
- int prox = data[1] & 0x20, pressure;
+ int prox = data[1] & 0x20;
dev_dbg(input->dev.parent,
"%s: received report #%d", __func__, data[0]);
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
- pressure = ((data[7] & 0x01) << 8) | data[6];
- if (pressure < 0)
- pressure = features->pressure_max + pressure + 1;
- input_report_abs(input, ABS_PRESSURE, pressure);
+ input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]);
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
if (!prox) /* out-prox */
wacom->id[0] = 0;
static int wacom_24hdt_irq(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->input;
- char *data = wacom->data;
+ unsigned char *data = wacom->data;
int i;
int current_num_contacts = data[61];
int contacts_to_send = 0;
static int wacom_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->input;
- char *data = wacom->data;
+ unsigned char *data = wacom->data;
int i;
int current_num_contacts = data[2];
int contacts_to_send = 0;
static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
{
- char *data = wacom->data;
+ unsigned char *data = wacom->data;
struct input_dev *input = wacom->input;
bool prox;
int x = 0, y = 0;
static int wacom_tpc_pen(struct wacom_wac *wacom)
{
- struct wacom_features *features = &wacom->features;
- char *data = wacom->data;
+ unsigned char *data = wacom->data;
struct input_dev *input = wacom->input;
- int pressure;
bool prox = data[1] & 0x20;
if (!wacom->shared->stylus_in_proximity) /* first in prox */
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
- pressure = ((data[7] & 0x01) << 8) | data[6];
- if (pressure < 0)
- pressure = features->pressure_max + pressure + 1;
- input_report_abs(input, ABS_PRESSURE, pressure);
+ input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x03) << 8) | data[6]);
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
input_report_key(input, wacom->tool[0], prox);
return 1;
static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
{
- char *data = wacom->data;
+ unsigned char *data = wacom->data;
dev_dbg(wacom->input->dev.parent,
"%s: received report #%d\n", __func__, data[0]);
case DTU:
if (features->type == DTUS) {
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
- for (i = 0; i < 3; i++)
+ for (i = 0; i < 4; i++)
__set_bit(BTN_0 + i, input_dev->keybit);
}
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
To compile this driver as a module, choose M here: the
module will be called ti_am335x_tsc.
-config TOUCHSCREEN_ATMEL_TSADCC
- tristate "Atmel Touchscreen Interface"
- depends on ARCH_AT91
- help
- Say Y here if you have a 4-wire touchscreen connected to the
- ADC Controller on your Atmel SoC.
-
- If unsure, say N.
-
- To compile this driver as a module, choose M here: the
- module will be called atmel_tsadcc.
-
config TOUCHSCREEN_UCB1400
tristate "Philips UCB1400 touchscreen"
depends on AC97_BUS
obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o
-obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o
obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct ads7846 *ts = dev_get_drvdata(dev); \
- ssize_t v = ads7846_read12_ser(dev, \
+ ssize_t v = ads7846_read12_ser(&ts->spi->dev, \
READ_12BIT_SER(var)); \
if (v < 0) \
return v; \
+++ /dev/null
-/*
- * Atmel Touch Screen Driver
- *
- * Copyright (c) 2008 ATMEL
- * Copyright (c) 2008 Dan Liang
- * Copyright (c) 2008 TimeSys Corporation
- * Copyright (c) 2008 Justin Waters
- *
- * Based on touchscreen code from Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/atmel.h>
-#include <mach/cpu.h>
-
-/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
-
-#define ATMEL_TSADCC_CR 0x00 /* Control register */
-#define ATMEL_TSADCC_SWRST (1 << 0) /* Software Reset*/
-#define ATMEL_TSADCC_START (1 << 1) /* Start conversion */
-
-#define ATMEL_TSADCC_MR 0x04 /* Mode register */
-#define ATMEL_TSADCC_TSAMOD (3 << 0) /* ADC mode */
-#define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */
-#define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */
-#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */
-#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */
-#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
-#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */
-#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
-#define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */
-#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
-#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
-#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
-
-#define ATMEL_TSADCC_TRGR 0x08 /* Trigger register */
-#define ATMEL_TSADCC_TRGMOD (7 << 0) /* Trigger mode */
-#define ATMEL_TSADCC_TRGMOD_NONE (0 << 0)
-#define ATMEL_TSADCC_TRGMOD_EXT_RISING (1 << 0)
-#define ATMEL_TSADCC_TRGMOD_EXT_FALLING (2 << 0)
-#define ATMEL_TSADCC_TRGMOD_EXT_ANY (3 << 0)
-#define ATMEL_TSADCC_TRGMOD_PENDET (4 << 0)
-#define ATMEL_TSADCC_TRGMOD_PERIOD (5 << 0)
-#define ATMEL_TSADCC_TRGMOD_CONTINUOUS (6 << 0)
-#define ATMEL_TSADCC_TRGPER (0xffff << 16) /* Trigger period */
-
-#define ATMEL_TSADCC_TSR 0x0C /* Touch Screen register */
-#define ATMEL_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */
-#define ATMEL_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */
-
-#define ATMEL_TSADCC_CHER 0x10 /* Channel Enable register */
-#define ATMEL_TSADCC_CHDR 0x14 /* Channel Disable register */
-#define ATMEL_TSADCC_CHSR 0x18 /* Channel Status register */
-#define ATMEL_TSADCC_CH(n) (1 << (n)) /* Channel number */
-
-#define ATMEL_TSADCC_SR 0x1C /* Status register */
-#define ATMEL_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */
-#define ATMEL_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */
-#define ATMEL_TSADCC_DRDY (1 << 16) /* Data Ready */
-#define ATMEL_TSADCC_GOVRE (1 << 17) /* General Overrun Error */
-#define ATMEL_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */
-#define ATMEL_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */
-#define ATMEL_TSADCC_PENCNT (1 << 20) /* Pen contact */
-#define ATMEL_TSADCC_NOCNT (1 << 21) /* No contact */
-
-#define ATMEL_TSADCC_LCDR 0x20 /* Last Converted Data register */
-#define ATMEL_TSADCC_DATA (0x3ff << 0) /* Channel data */
-
-#define ATMEL_TSADCC_IER 0x24 /* Interrupt Enable register */
-#define ATMEL_TSADCC_IDR 0x28 /* Interrupt Disable register */
-#define ATMEL_TSADCC_IMR 0x2C /* Interrupt Mask register */
-#define ATMEL_TSADCC_CDR0 0x30 /* Channel Data 0 */
-#define ATMEL_TSADCC_CDR1 0x34 /* Channel Data 1 */
-#define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */
-#define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */
-#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */
-#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */
-
-#define ATMEL_TSADCC_XPOS 0x50
-#define ATMEL_TSADCC_Z1DAT 0x54
-#define ATMEL_TSADCC_Z2DAT 0x58
-
-#define PRESCALER_VAL(x) ((x) >> 8)
-
-#define ADC_DEFAULT_CLOCK 100000
-
-struct atmel_tsadcc {
- struct input_dev *input;
- char phys[32];
- struct clk *clk;
- int irq;
- unsigned int prev_absx;
- unsigned int prev_absy;
- unsigned char bufferedmeasure;
-};
-
-static void __iomem *tsc_base;
-
-#define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg))
-#define atmel_tsadcc_write(reg, val) __raw_writel((val), tsc_base + (reg))
-
-static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
-{
- struct atmel_tsadcc *ts_dev = (struct atmel_tsadcc *)dev;
- struct input_dev *input_dev = ts_dev->input;
-
- unsigned int status;
- unsigned int reg;
-
- status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
- status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
-
- if (status & ATMEL_TSADCC_NOCNT) {
- /* Contact lost */
- reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
-
- atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
- atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
- atmel_tsadcc_write(ATMEL_TSADCC_IDR,
- ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
- atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
-
- input_report_key(input_dev, BTN_TOUCH, 0);
- ts_dev->bufferedmeasure = 0;
- input_sync(input_dev);
-
- } else if (status & ATMEL_TSADCC_PENCNT) {
- /* Pen detected */
- reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
- reg &= ~ATMEL_TSADCC_PENDBC;
-
- atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
- atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
- atmel_tsadcc_write(ATMEL_TSADCC_IER,
- ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
- atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
- ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
-
- } else if (status & ATMEL_TSADCC_EOC(3)) {
- /* Conversion finished */
-
- if (ts_dev->bufferedmeasure) {
- /* Last measurement is always discarded, since it can
- * be erroneous.
- * Always report previous measurement */
- input_report_abs(input_dev, ABS_X, ts_dev->prev_absx);
- input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy);
- input_report_key(input_dev, BTN_TOUCH, 1);
- input_sync(input_dev);
- } else
- ts_dev->bufferedmeasure = 1;
-
- /* Now make new measurement */
- ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
- ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
-
- ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
- ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int atmel_tsadcc_probe(struct platform_device *pdev)
-{
- struct atmel_tsadcc *ts_dev;
- struct input_dev *input_dev;
- struct resource *res;
- struct at91_tsadcc_data *pdata = dev_get_platdata(&pdev->dev);
- int err;
- unsigned int prsc;
- unsigned int reg;
-
- if (!pdata)
- return -EINVAL;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no mmio resource defined.\n");
- return -ENXIO;
- }
-
- /* Allocate memory for device */
- ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
- if (!ts_dev) {
- dev_err(&pdev->dev, "failed to allocate memory.\n");
- return -ENOMEM;
- }
- platform_set_drvdata(pdev, ts_dev);
-
- input_dev = input_allocate_device();
- if (!input_dev) {
- dev_err(&pdev->dev, "failed to allocate input device.\n");
- err = -EBUSY;
- goto err_free_mem;
- }
-
- ts_dev->irq = platform_get_irq(pdev, 0);
- if (ts_dev->irq < 0) {
- dev_err(&pdev->dev, "no irq ID is designated.\n");
- err = -ENODEV;
- goto err_free_dev;
- }
-
- if (!request_mem_region(res->start, resource_size(res),
- "atmel tsadcc regs")) {
- dev_err(&pdev->dev, "resources is unavailable.\n");
- err = -EBUSY;
- goto err_free_dev;
- }
-
- tsc_base = ioremap(res->start, resource_size(res));
- if (!tsc_base) {
- dev_err(&pdev->dev, "failed to map registers.\n");
- err = -ENOMEM;
- goto err_release_mem;
- }
-
- err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0,
- pdev->dev.driver->name, ts_dev);
- if (err) {
- dev_err(&pdev->dev, "failed to allocate irq.\n");
- goto err_unmap_regs;
- }
-
- ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
- if (IS_ERR(ts_dev->clk)) {
- dev_err(&pdev->dev, "failed to get ts_clk\n");
- err = PTR_ERR(ts_dev->clk);
- goto err_free_irq;
- }
-
- ts_dev->input = input_dev;
- ts_dev->bufferedmeasure = 0;
-
- snprintf(ts_dev->phys, sizeof(ts_dev->phys),
- "%s/input0", dev_name(&pdev->dev));
-
- input_dev->name = "atmel touch screen controller";
- input_dev->phys = ts_dev->phys;
- input_dev->dev.parent = &pdev->dev;
-
- __set_bit(EV_ABS, input_dev->evbit);
- input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
-
- input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
-
- /* clk_enable() always returns 0, no need to check it */
- clk_enable(ts_dev->clk);
-
- prsc = clk_get_rate(ts_dev->clk);
- dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
-
- if (!pdata->adc_clock)
- pdata->adc_clock = ADC_DEFAULT_CLOCK;
-
- prsc = (prsc / (2 * pdata->adc_clock)) - 1;
-
- /* saturate if this value is too high */
- if (cpu_is_at91sam9rl()) {
- if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL))
- prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL);
- } else {
- if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL))
- prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL);
- }
-
- dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc);
-
- reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE |
- ((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */
- ((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */
- (prsc << 8) |
- ((0x26 << 16) & ATMEL_TSADCC_STARTUP) |
- ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC);
-
- atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
- atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
- atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
- atmel_tsadcc_write(ATMEL_TSADCC_TSR,
- (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM);
-
- atmel_tsadcc_read(ATMEL_TSADCC_SR);
- atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
-
- /* All went ok, so register to the input system */
- err = input_register_device(input_dev);
- if (err)
- goto err_fail;
-
- return 0;
-
-err_fail:
- clk_disable(ts_dev->clk);
- clk_put(ts_dev->clk);
-err_free_irq:
- free_irq(ts_dev->irq, ts_dev);
-err_unmap_regs:
- iounmap(tsc_base);
-err_release_mem:
- release_mem_region(res->start, resource_size(res));
-err_free_dev:
- input_free_device(input_dev);
-err_free_mem:
- kfree(ts_dev);
- return err;
-}
-
-static int atmel_tsadcc_remove(struct platform_device *pdev)
-{
- struct atmel_tsadcc *ts_dev = platform_get_drvdata(pdev);
- struct resource *res;
-
- free_irq(ts_dev->irq, ts_dev);
-
- input_unregister_device(ts_dev->input);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- iounmap(tsc_base);
- release_mem_region(res->start, resource_size(res));
-
- clk_disable(ts_dev->clk);
- clk_put(ts_dev->clk);
-
- kfree(ts_dev);
-
- return 0;
-}
-
-static struct platform_driver atmel_tsadcc_driver = {
- .probe = atmel_tsadcc_probe,
- .remove = atmel_tsadcc_remove,
- .driver = {
- .name = "atmel_tsadcc",
- },
-};
-module_platform_driver(atmel_tsadcc_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atmel TouchScreen Driver");
-MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
-
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/irqchip/chained_irq.h>
+#include <linux/cpu.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30)
#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4)
+#define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF
#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
#define ARMADA_375_PPI_CAUSE (0x10)
struct msi_desc *desc)
{
struct msi_msg msg;
- irq_hw_number_t hwirq;
- int virq;
+ int virq, hwirq;
hwirq = armada_370_xp_alloc_msi();
if (hwirq < 0)
unsigned int irq)
{
struct irq_data *d = irq_get_irq_data(irq);
+ unsigned long hwirq = d->hwirq;
+
irq_dispose_mapping(irq);
- armada_370_xp_free_msi(d->hwirq);
+ armada_370_xp_free_msi(hwirq);
+}
+
+static int armada_370_xp_check_msi_device(struct msi_chip *chip, struct pci_dev *dev,
+ int nvec, int type)
+{
+ /* We support MSI, but not MSI-X */
+ if (type == PCI_CAP_ID_MSI)
+ return 0;
+ return -EINVAL;
}
static struct irq_chip armada_370_xp_msi_irq_chip = {
msi_chip->setup_irq = armada_370_xp_setup_msi_irq;
msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq;
+ msi_chip->check_device = armada_370_xp_check_msi_device;
msi_chip->of_node = node;
armada_370_xp_msi_domain =
static int armada_xp_set_affinity(struct irq_data *d,
const struct cpumask *mask_val, bool force)
{
- unsigned long reg;
- unsigned long new_mask = 0;
- unsigned long online_mask = 0;
- unsigned long count = 0;
irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ unsigned long reg, mask;
int cpu;
- for_each_cpu(cpu, mask_val) {
- new_mask |= 1 << cpu_logical_map(cpu);
- count++;
- }
-
- /*
- * Forbid mutlicore interrupt affinity
- * This is required since the MPIC HW doesn't limit
- * several CPUs from acknowledging the same interrupt.
- */
- if (count > 1)
- return -EINVAL;
-
- for_each_cpu(cpu, cpu_online_mask)
- online_mask |= 1 << cpu_logical_map(cpu);
+ /* Select a single core from the affinity mask which is online */
+ cpu = cpumask_any_and(mask_val, cpu_online_mask);
+ mask = 1UL << cpu_logical_map(cpu);
raw_spin_lock(&irq_controller_lock);
-
reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
- reg = (reg & (~online_mask)) | new_mask;
+ reg = (reg & (~ARMADA_370_XP_INT_SOURCE_CPU_MASK)) | mask;
writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
-
raw_spin_unlock(&irq_controller_lock);
return 0;
}
#ifdef CONFIG_SMP
-void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq)
+static void armada_mpic_send_doorbell(const struct cpumask *mask,
+ unsigned int irq)
{
int cpu;
unsigned long map = 0;
ARMADA_370_XP_SW_TRIG_INT_OFFS);
}
-void armada_xp_mpic_smp_cpu_init(void)
+static void armada_xp_mpic_smp_cpu_init(void)
{
/* Clear pending IPIs */
writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
/* Unmask IPI interrupt */
writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
}
+
+static int armada_xp_mpic_secondary_init(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+ armada_xp_mpic_smp_cpu_init();
+ return NOTIFY_OK;
+}
+
+static struct notifier_block armada_370_xp_mpic_cpu_notifier = {
+ .notifier_call = armada_xp_mpic_secondary_init,
+ .priority = 100,
+};
+
#endif /* CONFIG_SMP */
static struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
#ifdef CONFIG_SMP
armada_xp_mpic_smp_cpu_init();
-
- /*
- * Set the default affinity from all CPUs to the boot cpu.
- * This is required since the MPIC doesn't limit several CPUs
- * from acknowledging the same interrupt.
- */
- cpumask_clear(irq_default_affinity);
- cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
-
#endif
armada_370_xp_msi_init(node, main_int_res.start);
if (parent_irq <= 0) {
irq_set_default_host(armada_370_xp_mpic_domain);
set_handle_irq(armada_370_xp_handle_irq);
+#ifdef CONFIG_SMP
+ set_smp_cross_call(armada_mpic_send_doorbell);
+ register_cpu_notifier(&armada_370_xp_mpic_cpu_notifier);
+#endif
} else {
irq_set_chained_handler(parent_irq,
armada_370_xp_mpic_handle_cascade_irq);
int i, size, max, reserved = 0, entry;
const __be32 *irqsr;
- cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL);
+ cb = kzalloc(sizeof(*cb), GFP_KERNEL);
if (!cb)
return -ENOMEM;
bool force)
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
- unsigned int shift = (gic_irq(d) % 4) * 8;
- unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
+ unsigned int cpu, shift = (gic_irq(d) % 4) * 8;
u32 val, mask, bit;
+ if (!force)
+ cpu = cpumask_any_and(mask_val, cpu_online_mask);
+ else
+ cpu = cpumask_first(mask_val);
+
if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids)
return -EINVAL;
u32 stat = readl_relaxed(gc->reg_base + ORION_IRQ_CAUSE) &
gc->mask_cache;
while (stat) {
- u32 hwirq = ffs(stat) - 1;
+ u32 hwirq = __fls(stat);
u32 irq = irq_find_mapping(orion_irq_domain,
gc->irq_base + hwirq);
handle_IRQ(irq, regs);
gc->mask_cache;
while (stat) {
- u32 hwirq = ffs(stat) - 1;
+ u32 hwirq = __fls(stat);
generic_handle_irq(irq_find_mapping(d, gc->irq_base + hwirq));
stat &= ~(1 << hwirq);
} else {
inc_hit_counter(cache, bio);
+ pb->all_io_entry = dm_deferred_entry_inc(cache->all_io_ds);
if (bio_data_dir(bio) == WRITE && writethrough_mode(&cache->features) &&
!is_dirty(cache, lookup_result.cblock))
struct bio_list deferred_bio_list;
struct bio_list retry_on_resume_list;
struct rb_root sort_bio_list; /* sorted list of deferred bios */
+
+ /*
+ * Ensures the thin is not destroyed until the worker has finished
+ * iterating the active_thins list.
+ */
+ atomic_t refcount;
+ struct completion can_destroy;
};
/*----------------------------------------------------------------*/
blk_finish_plug(&plug);
}
+static void thin_get(struct thin_c *tc);
+static void thin_put(struct thin_c *tc);
+
+/*
+ * We can't hold rcu_read_lock() around code that can block. So we
+ * find a thin with the rcu lock held; bump a refcount; then drop
+ * the lock.
+ */
+static struct thin_c *get_first_thin(struct pool *pool)
+{
+ struct thin_c *tc = NULL;
+
+ rcu_read_lock();
+ if (!list_empty(&pool->active_thins)) {
+ tc = list_entry_rcu(pool->active_thins.next, struct thin_c, list);
+ thin_get(tc);
+ }
+ rcu_read_unlock();
+
+ return tc;
+}
+
+static struct thin_c *get_next_thin(struct pool *pool, struct thin_c *tc)
+{
+ struct thin_c *old_tc = tc;
+
+ rcu_read_lock();
+ list_for_each_entry_continue_rcu(tc, &pool->active_thins, list) {
+ thin_get(tc);
+ thin_put(old_tc);
+ rcu_read_unlock();
+ return tc;
+ }
+ thin_put(old_tc);
+ rcu_read_unlock();
+
+ return NULL;
+}
+
static void process_deferred_bios(struct pool *pool)
{
unsigned long flags;
struct bio_list bios;
struct thin_c *tc;
- rcu_read_lock();
- list_for_each_entry_rcu(tc, &pool->active_thins, list)
+ tc = get_first_thin(pool);
+ while (tc) {
process_thin_deferred_bios(tc);
- rcu_read_unlock();
+ tc = get_next_thin(pool, tc);
+ }
/*
* If there are any deferred flush bios, we must commit
{
struct noflush_work w;
- INIT_WORK(&w.worker, fn);
+ INIT_WORK_ONSTACK(&w.worker, fn);
w.tc = tc;
atomic_set(&w.complete, 0);
init_waitqueue_head(&w.wait);
/*----------------------------------------------------------------
* Thin target methods
*--------------------------------------------------------------*/
+static void thin_get(struct thin_c *tc)
+{
+ atomic_inc(&tc->refcount);
+}
+
+static void thin_put(struct thin_c *tc)
+{
+ if (atomic_dec_and_test(&tc->refcount))
+ complete(&tc->can_destroy);
+}
+
static void thin_dtr(struct dm_target *ti)
{
struct thin_c *tc = ti->private;
unsigned long flags;
+ thin_put(tc);
+ wait_for_completion(&tc->can_destroy);
+
spin_lock_irqsave(&tc->pool->lock, flags);
list_del_rcu(&tc->list);
spin_unlock_irqrestore(&tc->pool->lock, flags);
struct thin_c *tc;
struct dm_dev *pool_dev, *origin_dev;
struct mapped_device *pool_md;
+ unsigned long flags;
mutex_lock(&dm_thin_pool_table.mutex);
mutex_unlock(&dm_thin_pool_table.mutex);
- spin_lock(&tc->pool->lock);
+ atomic_set(&tc->refcount, 1);
+ init_completion(&tc->can_destroy);
+
+ spin_lock_irqsave(&tc->pool->lock, flags);
list_add_tail_rcu(&tc->list, &tc->pool->active_thins);
- spin_unlock(&tc->pool->lock);
+ spin_unlock_irqrestore(&tc->pool->lock, flags);
/*
* This synchronize_rcu() call is needed here otherwise we risk a
* wake_worker() call finding no bios to process (because the newly
return r;
}
}
-
todo = 1 << v->data_dev_block_bits;
- while (io->iter.bi_size) {
+ do {
u8 *page;
+ unsigned len;
struct bio_vec bv = bio_iter_iovec(bio, io->iter);
page = kmap_atomic(bv.bv_page);
- r = crypto_shash_update(desc, page + bv.bv_offset,
- bv.bv_len);
+ len = bv.bv_len;
+ if (likely(len >= todo))
+ len = todo;
+ r = crypto_shash_update(desc, page + bv.bv_offset, len);
kunmap_atomic(page);
if (r < 0) {
return r;
}
- bio_advance_iter(bio, &io->iter, bv.bv_len);
- }
+ bio_advance_iter(bio, &io->iter, len);
+ todo -= len;
+ } while (todo);
if (!v->version) {
r = crypto_shash_update(desc, v->salt, v->salt_size);
memset(r, 0, sizeof(*r));
/*
- * Get optional "interrupts-names" property to add a name
+ * Get optional "interrupt-names" property to add a name
* to the resource.
*/
of_property_read_string_index(dev, "interrupt-names", index,
}
EXPORT_SYMBOL_GPL(of_irq_to_resource);
+/**
+ * of_irq_get - Decode a node's IRQ and return it as a Linux irq number
+ * @dev: pointer to device tree node
+ * @index: zero-based index of the irq
+ *
+ * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain
+ * is not yet created.
+ *
+ */
+int of_irq_get(struct device_node *dev, int index)
+{
+ int rc;
+ struct of_phandle_args oirq;
+ struct irq_domain *domain;
+
+ rc = of_irq_parse_one(dev, index, &oirq);
+ if (rc)
+ return rc;
+
+ domain = irq_find_host(oirq.np);
+ if (!domain)
+ return -EPROBE_DEFER;
+
+ return irq_create_of_mapping(&oirq);
+}
+
/**
* of_irq_count - Count the number of IRQs a node uses
* @dev: pointer to device tree node
rc = of_address_to_resource(np, i, res);
WARN_ON(rc);
}
- WARN_ON(of_irq_to_resource_table(np, res, num_irq) != num_irq);
+ if (of_irq_to_resource_table(np, res, num_irq) != num_irq)
+ pr_debug("not all legacy IRQ resources mapped for %s\n",
+ np->name);
}
dev->dev.of_node = of_node_get(np);
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/slab.h>
}
}
+static void __init of_selftest_platform_populate(void)
+{
+ int irq;
+ struct device_node *np;
+ struct platform_device *pdev;
+
+ np = of_find_node_by_path("/testcase-data");
+ of_platform_populate(np, of_default_bus_match_table, NULL, NULL);
+
+ /* Test that a missing irq domain returns -EPROBE_DEFER */
+ np = of_find_node_by_path("/testcase-data/testcase-device1");
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ selftest(0, "device 1 creation failed\n");
+ irq = platform_get_irq(pdev, 0);
+ if (irq != -EPROBE_DEFER)
+ selftest(0, "device deferred probe failed - %d\n", irq);
+
+ /* Test that a parsing failure does not return -EPROBE_DEFER */
+ np = of_find_node_by_path("/testcase-data/testcase-device2");
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ selftest(0, "device 2 creation failed\n");
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0 || irq == -EPROBE_DEFER)
+ selftest(0, "device parsing error failed - %d\n", irq);
+
+ selftest(1, "passed");
+}
+
static int __init of_selftest(void)
{
struct device_node *np;
of_selftest_parse_interrupts();
of_selftest_parse_interrupts_extended();
of_selftest_match_node();
+ of_selftest_platform_populate();
pr_info("end of selftest - %i passed, %i failed\n",
selftest_results.passed, selftest_results.failed);
return 0;
<&test_intmap1 1 2>;
};
};
+
+ testcase-device1 {
+ compatible = "testcase-device";
+ interrupt-parent = <&test_intc0>;
+ interrupts = <1>;
+ };
+
+ testcase-device2 {
+ compatible = "testcase-device";
+ interrupt-parent = <&test_intc2>;
+ interrupts = <1>; /* invalid specifier - too short */
+ };
};
+
};
config OMAP_CONTROL_PHY
tristate "OMAP CONTROL PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
help
Enable this to add support for the PHY part present in the control
module. This driver has API to power on the USB2 PHY and to write to
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o
-obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
class_dev_iter_init(&iter, phy_class, NULL, NULL);
while ((dev = class_dev_iter_next(&iter))) {
phy = to_phy(dev);
+
+ if (!phy->init_data)
+ continue;
count = phy->init_data->num_consumers;
consumers = phy->init_data->consumers;
while (count--) {
};
struct as3722_gpio_pin_control {
- bool enable_gpio_invert;
unsigned mode_prop;
int io_function;
};
return mode;
}
- if (as_pci->gpio_control[offset].enable_gpio_invert)
- mode |= AS3722_GPIO_INV;
-
- return as3722_write(as3722, AS3722_GPIOn_CONTROL_REG(offset), mode);
+ return as3722_update_bits(as3722, AS3722_GPIOn_CONTROL_REG(offset),
+ AS3722_GPIO_MODE_MASK, mode);
}
static const struct pinmux_ops as3722_pinmux_ops = {
{
struct as3722_pctrl_info *as_pci = to_as_pci(chip);
struct as3722 *as3722 = as_pci->as3722;
- int en_invert = as_pci->gpio_control[offset].enable_gpio_invert;
+ int en_invert;
u32 val;
int ret;
+ ret = as3722_read(as3722, AS3722_GPIOn_CONTROL_REG(offset), &val);
+ if (ret < 0) {
+ dev_err(as_pci->dev,
+ "GPIO_CONTROL%d_REG read failed: %d\n", offset, ret);
+ return;
+ }
+ en_invert = !!(val & AS3722_GPIO_INV);
+
if (value)
val = (en_invert) ? 0 : AS3722_GPIOn_SIGNAL(offset);
else
static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
unsigned pin_pos)
{
+ struct pcs_soc_data *pcs_soc = &pcs->socdata;
struct pinctrl_pin_desc *pin;
struct pcs_name *pn;
int i;
return -ENOMEM;
}
+ if (pcs_soc->irq_enable_mask) {
+ unsigned val;
+
+ val = pcs->read(pcs->base + offset);
+ if (val & pcs_soc->irq_enable_mask) {
+ dev_dbg(pcs->dev, "irq enabled at boot for pin at %lx (%x), clearing\n",
+ (unsigned long)pcs->res->start + offset, val);
+ val &= ~pcs_soc->irq_enable_mask;
+ pcs->write(val, pcs->base + offset);
+ }
+ }
+
pin = &pcs->pins.pa[i];
pn = &pcs->names[i];
sprintf(pn->name, "%lx.%d",
*/
for (i = 0; i < state->pinfuncgrpcnt; i++) {
const struct tb10x_pinfuncgrp *pfg = &state->pingroups[i];
- unsigned int port = pfg->port;
unsigned int mode = pfg->mode;
- int j;
+ int j, port = pfg->port;
/*
* Skip pin groups which are always mapped and don't need
FN_MSIOF0_SCK_B, 0,
/* IP5_23_21 [3] */
FN_WE1_N, FN_IERX, FN_CAN1_RX, FN_VI1_G4,
- FN_VI1_G4_B, FN_VI2_R6, FN_SCIFA0_CTS_N_B,
- FN_IERX_C, 0,
+ FN_VI1_G4_B, FN_VI2_R6, FN_SCIFA0_CTS_N_B, FN_IERX_C,
/* IP5_20_18 [3] */
FN_WE0_N, FN_IECLK, FN_CAN_CLK,
FN_VI2_VSYNC_N, FN_SCIFA0_TXD_B, FN_VI2_VSYNC_N_B, 0, 0,
/* SEL_SCIF3 [2] */
FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
/* SEL_IEB [2] */
- FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2,
+ FN_SEL_IEB_0, FN_SEL_IEB_1, FN_SEL_IEB_2, 0,
/* SEL_MMC [1] */
FN_SEL_MMC_0, FN_SEL_MMC_1,
/* SEL_SCIF5 [1] */
{
struct acpi_device *acpi_dev;
acpi_handle handle;
- struct acpi_buffer buffer;
- int ret;
+ int ret = 0;
pnp_dbg(&dev->dev, "set resources\n");
if (WARN_ON_ONCE(acpi_dev != dev->data))
dev->data = acpi_dev;
- ret = pnpacpi_build_resource_template(dev, &buffer);
- if (ret)
- return ret;
- ret = pnpacpi_encode_resources(dev, &buffer);
- if (ret) {
+ if (acpi_has_method(handle, METHOD_NAME__SRS)) {
+ struct acpi_buffer buffer;
+
+ ret = pnpacpi_build_resource_template(dev, &buffer);
+ if (ret)
+ return ret;
+
+ ret = pnpacpi_encode_resources(dev, &buffer);
+ if (!ret) {
+ acpi_status status;
+
+ status = acpi_set_current_resources(handle, &buffer);
+ if (ACPI_FAILURE(status))
+ ret = -EIO;
+ }
kfree(buffer.pointer);
- return ret;
}
- if (ACPI_FAILURE(acpi_set_current_resources(handle, &buffer)))
- ret = -EINVAL;
- else if (acpi_bus_power_manageable(handle))
+ if (!ret && acpi_bus_power_manageable(handle))
ret = acpi_bus_set_power(handle, ACPI_STATE_D0);
- kfree(buffer.pointer);
+
return ret;
}
{
struct acpi_device *acpi_dev;
acpi_handle handle;
- int ret;
+ acpi_status status;
dev_dbg(&dev->dev, "disable resources\n");
}
/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
- ret = 0;
if (acpi_bus_power_manageable(handle))
acpi_bus_set_power(handle, ACPI_STATE_D3_COLD);
- /* continue even if acpi_bus_set_power() fails */
- if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
- ret = -ENODEV;
- return ret;
+
+ /* continue even if acpi_bus_set_power() fails */
+ status = acpi_evaluate_object(handle, "_DIS", NULL, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND)
+ return -ENODEV;
+
+ return 0;
}
#ifdef CONFIG_ACPI_SLEEP
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/pnp.h>
}
#endif
+#ifdef CONFIG_PCI
+/* Device IDs of parts that have 32KB MCH space */
+static const unsigned int mch_quirk_devices[] = {
+ 0x0154, /* Ivy Bridge */
+ 0x0c00, /* Haswell */
+};
+
+static struct pci_dev *get_intel_host(void)
+{
+ int i;
+ struct pci_dev *host;
+
+ for (i = 0; i < ARRAY_SIZE(mch_quirk_devices); i++) {
+ host = pci_get_device(PCI_VENDOR_ID_INTEL, mch_quirk_devices[i],
+ NULL);
+ if (host)
+ return host;
+ }
+ return NULL;
+}
+
+static void quirk_intel_mch(struct pnp_dev *dev)
+{
+ struct pci_dev *host;
+ u32 addr_lo, addr_hi;
+ struct pci_bus_region region;
+ struct resource mch;
+ struct pnp_resource *pnp_res;
+ struct resource *res;
+
+ host = get_intel_host();
+ if (!host)
+ return;
+
+ /*
+ * MCHBAR is not an architected PCI BAR, so MCH space is usually
+ * reported as a PNP0C02 resource. The MCH space was originally
+ * 16KB, but is 32KB in newer parts. Some BIOSes still report a
+ * PNP0C02 resource that is only 16KB, which means the rest of the
+ * MCH space is consumed but unreported.
+ */
+
+ /*
+ * Read MCHBAR for Host Member Mapped Register Range Base
+ * https://www-ssl.intel.com/content/www/us/en/processors/core/4th-gen-core-family-desktop-vol-2-datasheet
+ * Sec 3.1.12.
+ */
+ pci_read_config_dword(host, 0x48, &addr_lo);
+ region.start = addr_lo & ~0x7fff;
+ pci_read_config_dword(host, 0x4c, &addr_hi);
+ region.start |= (u64) addr_hi << 32;
+ region.end = region.start + 32*1024 - 1;
+
+ memset(&mch, 0, sizeof(mch));
+ mch.flags = IORESOURCE_MEM;
+ pcibios_bus_to_resource(host->bus, &mch, ®ion);
+
+ list_for_each_entry(pnp_res, &dev->resources, list) {
+ res = &pnp_res->res;
+ if (res->end < mch.start || res->start > mch.end)
+ continue; /* no overlap */
+ if (res->start == mch.start && res->end == mch.end)
+ continue; /* exact match */
+
+ dev_info(&dev->dev, FW_BUG "PNP resource %pR covers only part of %s Intel MCH; extending to %pR\n",
+ res, pci_name(host), &mch);
+ res->start = mch.start;
+ res->end = mch.end;
+ break;
+ }
+
+ pci_dev_put(host);
+}
+#endif
+
/*
* PnP Quirks
* Cards or devices that need some tweaking due to incomplete resource info
{"PNP0c02", quirk_system_pci_resources},
#ifdef CONFIG_AMD_NB
{"PNP0c01", quirk_amd_mmconfig_area},
+#endif
+#ifdef CONFIG_PCI
+ {"PNP0c02", quirk_intel_mch},
#endif
{""}
};
* Copyright (C) 2012 ARM Limited
*/
-#include <linux/jiffies.h>
+#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
static void vexpress_reset_do(struct device *dev, const char *what)
{
int err = -ENOENT;
- struct vexpress_config_func *func =
- vexpress_config_func_get_by_dev(dev);
+ struct vexpress_config_func *func = dev_get_drvdata(dev);
if (func) {
- unsigned long timeout;
-
err = vexpress_config_write(func, 0, 0);
-
- timeout = jiffies + HZ;
- while (time_before(jiffies, timeout))
- cpu_relax();
+ if (!err)
+ mdelay(1000);
}
dev_emerg(dev, "Unable to %s (%d)\n", what, err);
enum vexpress_reset_func func;
const struct of_device_id *match =
of_match_device(vexpress_reset_of_match, &pdev->dev);
+ struct vexpress_config_func *config_func;
if (match)
func = (enum vexpress_reset_func)match->data;
else
func = pdev->id_entry->driver_data;
+ config_func = vexpress_config_func_get_by_dev(&pdev->dev);
+ if (!config_func)
+ return -EINVAL;
+ dev_set_drvdata(&pdev->dev, config_func);
+
switch (func) {
case FUNC_SHUTDOWN:
vexpress_power_off_device = &pdev->dev;
struct pbias_regulator_data {
struct regulator_desc desc;
void __iomem *pbias_addr;
- unsigned int pbias_reg;
struct regulator_dev *dev;
struct regmap *syscon;
const struct pbias_reg_info *info;
int voltage;
};
-static int pbias_regulator_set_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV, unsigned *selector)
-{
- struct pbias_regulator_data *data = rdev_get_drvdata(dev);
- const struct pbias_reg_info *info = data->info;
- int ret, vmode;
-
- if (min_uV <= 1800000)
- vmode = 0;
- else if (min_uV > 1800000)
- vmode = info->vmode;
-
- ret = regmap_update_bits(data->syscon, data->pbias_reg,
- info->vmode, vmode);
-
- return ret;
-}
-
-static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
-{
- struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
- const struct pbias_reg_info *info = data->info;
- int value, voltage;
-
- regmap_read(data->syscon, data->pbias_reg, &value);
- value &= info->vmode;
-
- voltage = value ? 3000000 : 1800000;
-
- return voltage;
-}
+static const unsigned int pbias_volt_table[] = {
+ 1800000,
+ 3000000
+};
static int pbias_regulator_enable(struct regulator_dev *rdev)
{
struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
const struct pbias_reg_info *info = data->info;
- int ret;
-
- ret = regmap_update_bits(data->syscon, data->pbias_reg,
- info->enable_mask, info->enable);
-
- return ret;
-}
-
-static int pbias_regulator_disable(struct regulator_dev *rdev)
-{
- struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
- const struct pbias_reg_info *info = data->info;
- int ret;
- ret = regmap_update_bits(data->syscon, data->pbias_reg,
- info->enable_mask, 0);
- return ret;
+ return regmap_update_bits(data->syscon, rdev->desc->enable_reg,
+ info->enable_mask, info->enable);
}
static int pbias_regulator_is_enable(struct regulator_dev *rdev)
const struct pbias_reg_info *info = data->info;
int value;
- regmap_read(data->syscon, data->pbias_reg, &value);
+ regmap_read(data->syscon, rdev->desc->enable_reg, &value);
- return (value & info->enable_mask) == info->enable_mask;
+ return (value & info->enable_mask) == info->enable;
}
static struct regulator_ops pbias_regulator_voltage_ops = {
- .set_voltage = pbias_regulator_set_voltage,
- .get_voltage = pbias_regulator_get_voltage,
- .enable = pbias_regulator_enable,
- .disable = pbias_regulator_disable,
- .is_enabled = pbias_regulator_is_enable,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .enable = pbias_regulator_enable,
+ .disable = regulator_disable_regmap,
+ .is_enabled = pbias_regulator_is_enable,
};
static const struct pbias_reg_info pbias_mmc_omap2430 = {
if (IS_ERR(syscon))
return PTR_ERR(syscon);
+ cfg.regmap = syscon;
cfg.dev = &pdev->dev;
for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) {
if (!res)
return -EINVAL;
- drvdata[data_idx].pbias_reg = res->start;
drvdata[data_idx].syscon = syscon;
drvdata[data_idx].info = info;
drvdata[data_idx].desc.name = info->name;
drvdata[data_idx].desc.owner = THIS_MODULE;
drvdata[data_idx].desc.type = REGULATOR_VOLTAGE;
drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops;
+ drvdata[data_idx].desc.volt_table = pbias_volt_table;
drvdata[data_idx].desc.n_voltages = 2;
drvdata[data_idx].desc.enable_time = info->enable_time;
+ drvdata[data_idx].desc.vsel_reg = res->start;
+ drvdata[data_idx].desc.vsel_mask = info->vmode;
+ drvdata[data_idx].desc.enable_reg = res->start;
+ drvdata[data_idx].desc.enable_mask = info->enable_mask;
cfg.init_data = pbias_matches[idx].init_data;
cfg.driver_data = &drvdata[data_idx];
static void chsc_process_event_information(struct chsc_sei *sei, u64 ntsm)
{
- do {
+ static int ntsm_unsupported;
+
+ while (true) {
memset(sei, 0, sizeof(*sei));
sei->request.length = 0x0010;
sei->request.code = 0x000e;
- sei->ntsm = ntsm;
+ if (!ntsm_unsupported)
+ sei->ntsm = ntsm;
if (chsc(sei))
break;
if (sei->response.code != 0x0001) {
- CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x)\n",
- sei->response.code);
+ CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x, ntsm=%llx)\n",
+ sei->response.code, sei->ntsm);
+
+ if (sei->response.code == 3 && sei->ntsm) {
+ /* Fallback for old firmware. */
+ ntsm_unsupported = 1;
+ continue;
+ }
break;
}
CIO_CRW_EVENT(2, "chsc: unhandled nt: %d\n", sei->nt);
break;
}
- } while (sei->u.nt0_area.flags & 0x80);
+
+ if (!(sei->u.nt0_area.flags & 0x80))
+ break;
+ }
}
/*
if (hpsa_simple_mode)
return;
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
/* Check for I/O accelerator mode support */
if (trans_support & CFGTBL_Trans_io_accel1) {
transMethod |= CFGTBL_Trans_io_accel1 |
}
/* TODO, check that this next line h->nreply_queues is correct */
- trans_support = readl(&(h->cfgtable->TransportSupport));
- if (!(trans_support & PERFORMANT_MODE))
- return;
-
h->nreply_queues = h->msix_vector > 0 ? h->msix_vector : 1;
hpsa_get_max_perf_mode_cmds(h);
/* Performant mode ring buffer and supporting data structures */
mpt2sas_base_free_resources(ioc);
pci_save_state(pdev);
- pci_disable_device(pdev);
pci_set_power_state(pdev, device_state);
return 0;
}
/*
* Retry after abort failed, escalate to next level.
*/
+ scmd->eh_eflags &= ~SCSI_EH_ABORT_SCHEDULED;
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
"scmd %p previous abort failed\n", scmd));
ses->prot_op = scmd->prot_op;
scmd->prot_op = SCSI_PROT_NORMAL;
+ scmd->eh_eflags = 0;
scmd->cmnd = ses->eh_cmnd;
memset(scmd->cmnd, 0, BLK_MAX_CDB);
memset(&scmd->sdb, 0, sizeof(scmd->sdb));
scmd->request->next_rq = NULL;
+ scmd->result = 0;
if (sense_bytes) {
scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
__func__));
break;
}
+ if (status_byte(scmd->result) != CHECK_CONDITION)
+ /*
+ * don't request sense if there's no check condition
+ * status because the error we're processing isn't one
+ * that has a sense code (and some devices get
+ * confused by sense requests out of the blue)
+ */
+ continue;
+
SCSI_LOG_ERROR_RECOVERY(2, scmd_printk(KERN_INFO, scmd,
"%s: requesting sense\n",
current->comm));
* lock such that the kblockd_schedule_work() call happens
* before blk_cleanup_queue() finishes.
*/
+ cmd->result = 0;
spin_lock_irqsave(q->queue_lock, flags);
blk_requeue_request(q, cmd->request);
kblockd_schedule_work(q, &device->requeue_work);
*/
int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
{
+ struct scsi_device *sdev = cmd->device;
struct request *rq = cmd->request;
int error = scsi_init_sgtable(rq, &cmd->sdb, gfp_mask);
scsi_release_buffers(cmd);
cmd->request->special = NULL;
scsi_put_command(cmd);
- put_device(&cmd->device->sdev_gendev);
+ put_device(&sdev->sdev_gendev);
return error;
}
EXPORT_SYMBOL(scsi_init_io);
struct scsi_cmnd *cmd = req->special;
scsi_release_buffers(cmd);
scsi_put_command(cmd);
- put_device(&cmd->device->sdev_gendev);
+ put_device(&sdev->sdev_gendev);
req->special = NULL;
}
break;
vscsi->affinity_hint_set = true;
} else {
- for (i = 0; i < vscsi->num_queues; i++)
+ for (i = 0; i < vscsi->num_queues; i++) {
+ if (!vscsi->req_vqs[i].vq)
+ continue;
+
virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1);
+ }
vscsi->affinity_hint_set = false;
}
atmel_spi_next_xfer_pio(master, xfer);
}
+ /* interrupts are disabled, so free the lock for schedule */
+ atmel_spi_unlock(as);
ret = wait_for_completion_timeout(&as->xfer_completion,
SPI_DMA_TIMEOUT);
+ atmel_spi_lock(as);
if (WARN_ON(ret == 0)) {
dev_err(&spi->dev,
"spi trasfer timeout, err %d\n", ret);
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/ioport.h>
return -ENOMEM;
}
- clk = clk_get(NULL, "shyway_clk");
+ clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "shyway_clk is required\n");
+ dev_err(&pdev->dev, "couldn't get clock\n");
ret = -EINVAL;
goto error0;
}
sspi->left_rx_word)
sspi->rx_word(sspi);
- if (spi_stat & (SIRFSOC_SPI_FIFO_EMPTY
- | SIRFSOC_SPI_TXFIFO_THD_REACH))
+ if (spi_stat & (SIRFSOC_SPI_TXFIFO_EMPTY |
+ SIRFSOC_SPI_TXFIFO_THD_REACH))
while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS)
& SIRFSOC_SPI_FIFO_FULL)) &&
sspi->left_tx_word)
writel(regval, sspi->base + SIRFSOC_SPI_CTRL);
} else {
int gpio = sspi->chipselect[spi->chip_select];
- gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
+ switch (value) {
+ case BITBANG_CS_ACTIVE:
+ gpio_direction_output(gpio,
+ spi->mode & SPI_CS_HIGH ? 1 : 0);
+ break;
+ case BITBANG_CS_INACTIVE:
+ gpio_direction_output(gpio,
+ spi->mode & SPI_CS_HIGH ? 0 : 1);
+ break;
+ }
}
}
regval &= ~SIRFSOC_SPI_CMD_MODE;
sspi->tx_by_cmd = false;
}
+ /*
+ * set spi controller in RISC chipselect mode, we are controlling CS by
+ * software BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE.
+ */
+ regval |= SIRFSOC_SPI_CS_IO_MODE;
writel(regval, sspi->base + SIRFSOC_SPI_CTRL);
if (IS_DMA_VALID(t)) {
/* pointer to the DA */
*datap++ = val & 0xff;
*datap++ = (val >> 8) & 0xff;
- *datap++ = chan;
+ *datap++ = chan << 6;
devpriv->ao_readback[chan] = val;
s->async->events |= COMEDI_CB_BLOCK;
/* set current channel of the running acquisition to zero */
s->async->cur_chan = 0;
- for (i = 0; i < cmd->chanlist_len; ++i) {
- unsigned int chan = CR_CHAN(cmd->chanlist[i]);
-
- devpriv->ao_chanlist[i] = chan << 6;
- }
+ for (i = 0; i < cmd->chanlist_len; ++i)
+ devpriv->ao_chanlist[i] = CR_CHAN(cmd->chanlist[i]);
/* we count in steps of 1ms (125us) */
/* 125us mode not used yet */
struct resource *iores;
int ret = 0, touch_ret;
int i, s;
- unsigned int scale_uv;
+ uint64_t scale_uv;
/* Allocate the IIO device. */
iio = devm_iio_device_alloc(dev, sizeof(*lradc));
vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
vel = (vel << 4) >> 4;
*val = vel;
+ break;
default:
mutex_unlock(&st->lock);
return -EINVAL;
status = serial8250_rx_chars(up, status);
}
serial8250_modem_status(up);
- if (status & UART_LSR_THRE)
+ if (!up->dma && (status & UART_LSR_THRE))
serial8250_tx_chars(up);
spin_unlock_irqrestore(&port->lock, flags);
struct uart_8250_port *p = param;
struct uart_8250_dma *dma = p->dma;
struct circ_buf *xmit = &p->port.state->xmit;
-
- dma->tx_running = 0;
+ unsigned long flags;
dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr,
UART_XMIT_SIZE, DMA_TO_DEVICE);
+ spin_lock_irqsave(&p->port.lock, flags);
+
+ dma->tx_running = 0;
+
xmit->tail += dma->tx_size;
xmit->tail &= UART_XMIT_SIZE - 1;
p->port.icount.tx += dma->tx_size;
if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port))
serial8250_tx_dma(p);
+
+ spin_unlock_irqrestore(&p->port.lock, flags);
}
static void __dma_rx_complete(void *param)
static void s3c24xx_serial_put_poll_char(struct uart_port *port,
unsigned char c)
{
- unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
- unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+ unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+ unsigned int ucon = rd_regl(port, S3C2410_UCON);
/* not possible to xmit on unconfigured port */
if (!s3c24xx_port_configured(ucon))
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
- wr_regb(cons_uart, S3C2410_UTXH, c);
+ wr_regb(port, S3C2410_UTXH, c);
}
#endif /* CONFIG_CONSOLE_POLL */
static void
s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
{
- unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
- unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
-
- /* not possible to xmit on unconfigured port */
- if (!s3c24xx_port_configured(ucon))
- return;
+ unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
while (!s3c24xx_serial_console_txrdy(port, ufcon))
- barrier();
- wr_regb(cons_uart, S3C2410_UTXH, ch);
+ cpu_relax();
+ wr_regb(port, S3C2410_UTXH, ch);
}
static void
s3c24xx_serial_console_write(struct console *co, const char *s,
unsigned int count)
{
+ unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+
+ /* not possible to xmit on unconfigured port */
+ if (!s3c24xx_port_configured(ucon))
+ return;
+
uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
}
if (uport->type == PORT_UNKNOWN)
return 1;
+ /*
+ * Make sure the device is in D0 state.
+ */
+ uart_change_pm(state, UART_PM_STATE_ON);
+
/*
* Initialise and allocate the transmit and temporary
* buffer.
* If we fail to request resources for the
* new port, try to restore the old settings.
*/
- if (retval && old_type != PORT_UNKNOWN) {
+ if (retval) {
uport->iobase = old_iobase;
uport->type = old_type;
uport->hub6 = old_hub6;
uport->iotype = old_iotype;
uport->regshift = old_shift;
uport->mapbase = old_mapbase;
- retval = uport->ops->request_port(uport);
- /*
- * If we failed to restore the old settings,
- * we fail like this.
- */
- if (retval)
- uport->type = PORT_UNKNOWN;
- /*
- * We failed anyway.
- */
- retval = -EBUSY;
+ if (old_type != PORT_UNKNOWN) {
+ retval = uport->ops->request_port(uport);
+ /*
+ * If we failed to restore the old settings,
+ * we fail like this.
+ */
+ if (retval)
+ uport->type = PORT_UNKNOWN;
+
+ /*
+ * We failed anyway.
+ */
+ retval = -EBUSY;
+ }
+
/* Added to return the correct error -Ram Gupta */
goto exit;
}
goto err_dec_count;
}
- /*
- * Make sure the device is in D0 state.
- */
- if (port->count == 1)
- uart_change_pm(state, UART_PM_STATE_ON);
-
/*
* Start up the serial port.
*/
if (change || left < size) {
/* This is the slow path - looking for new buffers to use */
if ((n = tty_buffer_alloc(port, size)) != NULL) {
+ unsigned long iflags;
+
n->flags = flags;
buf->tail = n;
+
+ spin_lock_irqsave(&buf->flush_lock, iflags);
b->commit = b->used;
- smp_mb();
b->next = n;
+ spin_unlock_irqrestore(&buf->flush_lock, iflags);
+
} else if (change)
size = 0;
else
mutex_lock(&buf->lock);
while (1) {
+ unsigned long flags;
struct tty_buffer *head = buf->head;
int count;
if (atomic_read(&buf->priority))
break;
+ spin_lock_irqsave(&buf->flush_lock, flags);
count = head->commit - head->read;
if (!count) {
- if (head->next == NULL)
+ if (head->next == NULL) {
+ spin_unlock_irqrestore(&buf->flush_lock, flags);
break;
+ }
buf->head = head->next;
+ spin_unlock_irqrestore(&buf->flush_lock, flags);
tty_buffer_free(port, head);
continue;
}
+ spin_unlock_irqrestore(&buf->flush_lock, flags);
count = receive_buf(tty, head, count);
if (!count)
struct tty_bufhead *buf = &port->buf;
mutex_init(&buf->lock);
+ spin_lock_init(&buf->flush_lock);
tty_buffer_reset(&buf->sentinel, 0);
buf->head = &buf->sentinel;
buf->tail = &buf->sentinel;
}
}
+/**
+ * ci_usb_phy_init: initialize phy according to different phy type
+ * @ci: the controller
+ *
+ * This function returns an error code if usb_phy_init has failed
+ */
+static int ci_usb_phy_init(struct ci_hdrc *ci)
+{
+ int ret;
+
+ switch (ci->platdata->phy_mode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ case USBPHY_INTERFACE_MODE_HSIC:
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ hw_phymode_configure(ci);
+ break;
+ case USBPHY_INTERFACE_MODE_ULPI:
+ case USBPHY_INTERFACE_MODE_SERIAL:
+ hw_phymode_configure(ci);
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ break;
+ default:
+ ret = usb_phy_init(ci->transceiver);
+ }
+
+ return ret;
+}
+
/**
* hw_device_reset: resets chip (execute without interruption)
* @ci: the controller
return -ENODEV;
}
- hw_phymode_configure(ci);
-
if (ci->platdata->phy)
ci->transceiver = ci->platdata->phy;
else
return -EPROBE_DEFER;
}
- ret = usb_phy_init(ci->transceiver);
+ ret = ci_usb_phy_init(ci);
if (ret) {
dev_err(dev, "unable to init phy: %d\n", ret);
return ret;
spin_lock_irqsave(&dwc->lock, flags);
+ dwc3_event_buffers_setup(dwc);
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
case USB_DR_MODE_OTG:
/* FALLTHROUGH */
case USB_DR_MODE_HOST:
default:
- dwc3_event_buffers_setup(dwc);
break;
}
* improve this algorithm so that we better use the internal
* FIFO space
*/
- for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) {
- struct dwc3_ep *dep = dwc->eps[num];
- int fifo_number = dep->number >> 1;
+ for (num = 0; num < dwc->num_in_eps; num++) {
+ /* bit0 indicates direction; 1 means IN ep */
+ struct dwc3_ep *dep = dwc->eps[(num << 1) | 1];
int mult = 1;
int tmp;
- if (!(dep->number & 1))
- continue;
-
if (!(dep->flags & DWC3_EP_ENABLED))
continue;
dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
dep->name, last_fifo_depth, fifo_size & 0xffff);
- dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number),
- fifo_size);
+ dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
last_fifo_depth += (fifo_size & 0xffff);
}
*/
struct usb_gadget *gadget = epfile->ffs->gadget;
+ spin_lock_irq(&epfile->ffs->eps_lock);
+ /* In the meantime, endpoint got disabled or changed. */
+ if (epfile->ep != ep) {
+ spin_unlock_irq(&epfile->ffs->eps_lock);
+ return -ESHUTDOWN;
+ }
/*
* Controller may require buffer size to be aligned to
* maxpacketsize of an out endpoint.
data_len = io_data->read ?
usb_ep_align_maybe(gadget, ep->ep, io_data->len) :
io_data->len;
+ spin_unlock_irq(&epfile->ffs->eps_lock);
data = kmalloc(data_len, GFP_KERNEL);
if (unlikely(!data))
if (skb2)
rndis_add_hdr(skb2);
- dev_kfree_skb_any(skb);
+ dev_kfree_skb(skb);
return skb2;
}
struct fsl_udc *udc;
udc = container_of(gadget, struct fsl_udc, gadget);
+
+ if (!udc->vbus_active)
+ return -EOPNOTSUPP;
+
udc->softconnect = (is_on != 0);
if (can_pullup(udc))
fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
if (!udc_controller)
return -ENODEV;
- usb_del_gadget_udc(&udc_controller->gadget);
udc_controller->done = &done;
+ usb_del_gadget_udc(&udc_controller->gadget);
fsl_udc_clk_release();
return -ESRCH;
/* fake probe to determine $CHIP */
+ CHIP = NULL;
usb_gadget_probe_driver(&probe_driver);
if (!CHIP)
return -ENODEV;
#include <asm/byteorder.h>
#include <asm/unaligned.h>
+#include "u_rndis.h"
#undef VERBOSE_DEBUG
#define UETH__VERSION "29-May-2008"
-#define GETHER_NAPI_WEIGHT 32
-
struct eth_dev {
/* lock is held while accessing port_usb
*/
struct sk_buff_head *list);
struct work_struct work;
- struct napi_struct rx_napi;
unsigned long todo;
#define WORK_RX_MEMORY 0
DBG(dev, "rx submit --> %d\n", retval);
if (skb)
dev_kfree_skb_any(skb);
+ spin_lock_irqsave(&dev->req_lock, flags);
+ list_add(&req->list, &dev->rx_reqs);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
}
return retval;
}
static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct sk_buff *skb = req->context;
+ struct sk_buff *skb = req->context, *skb2;
struct eth_dev *dev = ep->driver_data;
int status = req->status;
- bool rx_queue = 0;
switch (status) {
} else {
skb_queue_tail(&dev->rx_frames, skb);
}
- if (!status)
- rx_queue = 1;
+ skb = NULL;
+
+ skb2 = skb_dequeue(&dev->rx_frames);
+ while (skb2) {
+ if (status < 0
+ || ETH_HLEN > skb2->len
+ || skb2->len > VLAN_ETH_FRAME_LEN) {
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_length_errors++;
+ DBG(dev, "rx length %d\n", skb2->len);
+ dev_kfree_skb_any(skb2);
+ goto next_frame;
+ }
+ skb2->protocol = eth_type_trans(skb2, dev->net);
+ dev->net->stats.rx_packets++;
+ dev->net->stats.rx_bytes += skb2->len;
+
+ /* no buffer copies needed, unless hardware can't
+ * use skb buffers.
+ */
+ status = netif_rx(skb2);
+next_frame:
+ skb2 = skb_dequeue(&dev->rx_frames);
+ }
break;
/* software-driven interface shutdown */
/* FALLTHROUGH */
default:
- rx_queue = 1;
- dev_kfree_skb_any(skb);
dev->net->stats.rx_errors++;
DBG(dev, "rx status %d\n", status);
break;
}
+ if (skb)
+ dev_kfree_skb_any(skb);
+ if (!netif_running(dev->net)) {
clean:
spin_lock(&dev->req_lock);
list_add(&req->list, &dev->rx_reqs);
spin_unlock(&dev->req_lock);
-
- if (rx_queue && likely(napi_schedule_prep(&dev->rx_napi)))
- __napi_schedule(&dev->rx_napi);
+ req = NULL;
+ }
+ if (req)
+ rx_submit(dev, req, GFP_ATOMIC);
}
static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
{
struct usb_request *req;
unsigned long flags;
- int rx_counts = 0;
/* fill unused rxq slots with some skb */
spin_lock_irqsave(&dev->req_lock, flags);
while (!list_empty(&dev->rx_reqs)) {
-
- if (++rx_counts > qlen(dev->gadget, dev->qmult))
- break;
-
req = container_of(dev->rx_reqs.next,
struct usb_request, list);
list_del_init(&req->list);
spin_unlock_irqrestore(&dev->req_lock, flags);
if (rx_submit(dev, req, gfp_flags) < 0) {
- spin_lock_irqsave(&dev->req_lock, flags);
- list_add(&req->list, &dev->rx_reqs);
- spin_unlock_irqrestore(&dev->req_lock, flags);
defer_kevent(dev, WORK_RX_MEMORY);
return;
}
spin_unlock_irqrestore(&dev->req_lock, flags);
}
-static int gether_poll(struct napi_struct *napi, int budget)
-{
- struct eth_dev *dev = container_of(napi, struct eth_dev, rx_napi);
- struct sk_buff *skb;
- unsigned int work_done = 0;
- int status = 0;
-
- while ((skb = skb_dequeue(&dev->rx_frames))) {
- if (status < 0
- || ETH_HLEN > skb->len
- || skb->len > VLAN_ETH_FRAME_LEN) {
- dev->net->stats.rx_errors++;
- dev->net->stats.rx_length_errors++;
- DBG(dev, "rx length %d\n", skb->len);
- dev_kfree_skb_any(skb);
- continue;
- }
- skb->protocol = eth_type_trans(skb, dev->net);
- dev->net->stats.rx_packets++;
- dev->net->stats.rx_bytes += skb->len;
-
- status = netif_rx_ni(skb);
- }
-
- if (netif_running(dev->net)) {
- rx_fill(dev, GFP_KERNEL);
- work_done++;
- }
-
- if (work_done < budget)
- napi_complete(&dev->rx_napi);
-
- return work_done;
-}
-
static void eth_work(struct work_struct *work)
{
struct eth_dev *dev = container_of(work, struct eth_dev, work);
/* and open the tx floodgates */
atomic_set(&dev->tx_qlen, 0);
netif_wake_queue(dev->net);
- napi_enable(&dev->rx_napi);
}
static int eth_open(struct net_device *net)
unsigned long flags;
VDBG(dev, "%s\n", __func__);
- napi_disable(&dev->rx_napi);
netif_stop_queue(net);
DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
return ERR_PTR(-ENOMEM);
dev = netdev_priv(net);
- netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
spin_lock_init(&dev->lock);
spin_lock_init(&dev->req_lock);
INIT_WORK(&dev->work, eth_work);
return ERR_PTR(-ENOMEM);
dev = netdev_priv(net);
- netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
spin_lock_init(&dev->lock);
spin_lock_init(&dev->req_lock);
INIT_WORK(&dev->work, eth_work);
{
struct eth_dev *dev = link->ioport;
struct usb_request *req;
- struct sk_buff *skb;
WARN_ON(!dev);
if (!dev)
spin_lock(&dev->req_lock);
}
spin_unlock(&dev->req_lock);
-
- spin_lock(&dev->rx_frames.lock);
- while ((skb = __skb_dequeue(&dev->rx_frames)))
- dev_kfree_skb_any(skb);
- spin_unlock(&dev->rx_frames.lock);
-
link->in_ep->driver_data = NULL;
link->in_ep->desc = NULL;
ss_opts->isoc_interval = gzero_options.isoc_interval;
ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
ss_opts->isoc_mult = gzero_options.isoc_mult;
- ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket;
+ ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
ss_opts->bulk_buflen = gzero_options.bulk_buflen;
func_ss = usb_get_function(func_inst_ss);
*/
if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
+
+ xhci->quirks |= XHCI_SPURIOUS_REBOOT;
}
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
- pdev->device == 0x0015 &&
- pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
- pdev->subsystem_device == 0xc0cd)
+ pdev->device == 0x0015)
xhci->quirks |= XHCI_RESET_ON_RESUME;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
struct xhci_ring *ep_ring;
struct xhci_generic_trb *trb;
dma_addr_t addr;
+ u64 hw_dequeue;
ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
ep_index, stream_id);
stream_id);
return;
}
- state->new_cycle_state = 0;
- xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
- "Finding segment containing stopped TRB.");
- state->new_deq_seg = find_trb_seg(cur_td->start_seg,
- dev->eps[ep_index].stopped_trb,
- &state->new_cycle_state);
- if (!state->new_deq_seg) {
- WARN_ON(1);
- return;
- }
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
if (ep->ep_state & EP_HAS_STREAMS) {
struct xhci_stream_ctx *ctx =
&ep->stream_info->stream_ctx_array[stream_id];
- state->new_cycle_state = 0x1 & le64_to_cpu(ctx->stream_ring);
+ hw_dequeue = le64_to_cpu(ctx->stream_ring);
} else {
struct xhci_ep_ctx *ep_ctx
= xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
- state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+ hw_dequeue = le64_to_cpu(ep_ctx->deq);
}
+ /* Find virtual address and segment of hardware dequeue pointer */
+ state->new_deq_seg = ep_ring->deq_seg;
+ state->new_deq_ptr = ep_ring->dequeue;
+ while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
+ != (dma_addr_t)(hw_dequeue & ~0xf)) {
+ next_trb(xhci, ep_ring, &state->new_deq_seg,
+ &state->new_deq_ptr);
+ if (state->new_deq_ptr == ep_ring->dequeue) {
+ WARN_ON(1);
+ return;
+ }
+ }
+ /*
+ * Find cycle state for last_trb, starting at old cycle state of
+ * hw_dequeue. If there is only one segment ring, find_trb_seg() will
+ * return immediately and cannot toggle the cycle state if this search
+ * wraps around, so add one more toggle manually in that case.
+ */
+ state->new_cycle_state = hw_dequeue & 0x1;
+ if (ep_ring->first_seg == ep_ring->first_seg->next &&
+ cur_td->last_trb < state->new_deq_ptr)
+ state->new_cycle_state ^= 0x1;
+
state->new_deq_ptr = cur_td->last_trb;
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding segment containing last TRB in TD.");
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
- state->new_deq_ptr,
- &state->new_cycle_state);
+ state->new_deq_ptr, &state->new_cycle_state);
if (!state->new_deq_seg) {
WARN_ON(1);
return;
}
+ /* Increment to find next TRB after last_trb. Cycle if appropriate. */
trb = &state->new_deq_ptr->generic;
if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
(trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
state->new_cycle_state ^= 0x1;
next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
- /*
- * If there is only one segment in a ring, find_trb_seg()'s while loop
- * will not run, and it will return before it has a chance to see if it
- * needs to toggle the cycle bit. It can't tell if the stalled transfer
- * ended just before the link TRB on a one-segment ring, or if the TD
- * wrapped around the top of the ring, because it doesn't have the TD in
- * question. Look for the one-segment case where stalled TRB's address
- * is greater than the new dequeue pointer address.
- */
- if (ep_ring->first_seg == ep_ring->first_seg->next &&
- state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
- state->new_cycle_state ^= 0x1;
+ /* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
- /* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"New dequeue segment = %p (virtual)",
state->new_deq_seg);
if (list_empty(&ep->cancelled_td_list)) {
xhci_stop_watchdog_timer_in_irq(xhci, ep);
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
- /* Clear stopped_td and stopped_trb if endpoint is not halted */
- if (!(ep->ep_state & EP_HALTED)) {
+ /* Clear stopped_td if endpoint is not halted */
+ if (!(ep->ep_state & EP_HALTED))
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
- }
/*
* Drop the lock and complete the URBs in the cancelled TD list.
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
ep->ep_state |= EP_HALTED;
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
ep->stopped_stream = stream_id;
xhci_queue_reset_ep(xhci, slot_id, ep_index);
xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
ep->stopped_stream = 0;
xhci_ring_cmd_db(xhci);
* the ring dequeue pointer or take this TD off any lists yet.
*/
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
return 0;
} else {
if (trb_comp_code == COMP_STALL) {
* USB class driver clear the stall later.
*/
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
ep->stopped_stream = ep_ring->stream_id;
} else if (xhci_requires_manual_halt_cleanup(xhci,
ep_ctx, trb_comp_code)) {
#else
-static int xhci_try_enable_msi(struct usb_hcd *hcd)
+static inline int xhci_try_enable_msi(struct usb_hcd *hcd)
{
return 0;
}
-static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+static inline void xhci_cleanup_msix(struct xhci_hcd *xhci)
{
}
-static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
{
}
xhci_ring_cmd_db(xhci);
}
virt_ep->stopped_td = NULL;
- virt_ep->stopped_trb = NULL;
virt_ep->stopped_stream = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
#define EP_GETTING_NO_STREAMS (1 << 5)
/* ---- Related to URB cancellation ---- */
struct list_head cancelled_td_list;
- /* The TRB that was last reported in a stopped endpoint ring */
- union xhci_trb *stopped_trb;
struct xhci_td *stopped_td;
unsigned int stopped_stream;
/* Watchdog timer for stop endpoint command to cancel URBs */
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
del_timer_sync(&glue->timer);
-
usb_phy_shutdown(musb->xceiv);
+ debugfs_remove_recursive(glue->dbgfs_root);
+
return 0;
}
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- debugfs_remove_recursive(glue->dbgfs_root);
-
return 0;
}
{
struct omap2430_glue *glue = container_of(mailbox_work,
struct omap2430_glue, omap_musb_mailbox_work);
+ struct musb *musb = glue_to_musb(glue);
+ struct device *dev = musb->controller;
+
+ pm_runtime_get_sync(dev);
omap_musb_set_mailbox(glue);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
omap_musb_set_mailbox(glue);
phy_init(musb->phy);
+ phy_power_on(musb->phy);
pm_runtime_put_noidle(musb->controller);
return 0;
del_timer_sync(&musb_idle_timer);
omap2430_low_level_exit(musb);
+ phy_power_off(musb->phy);
phy_exit(musb->phy);
return 0;
#include <linux/err.h>
#include <linux/of.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include "am35x-phy-control.h"
struct am335x_control_usb {
}
writel(val, usb_ctrl->phy_reg + reg);
+
+ /*
+ * Give the PHY ~1ms to complete the power up operation.
+ * Tests have shown unstable behaviour if other USB PHY related
+ * registers are written too shortly after such a transition.
+ */
+ if (on)
+ mdelay(1);
}
static const struct phy_control ctrl_am335x = {
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_debug("PHY: unable to find transceiver of type %s\n",
usb_phy_type_string(type));
+ if (!IS_ERR(phy))
+ phy = ERR_PTR(-ENODEV);
+
goto err0;
}
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/serial.h>
+#include <linux/swab.h>
#include <linux/kfifo.h>
#include <linux/ioctl.h>
#include <linux/firmware.h>
{
int status = 0;
__u8 read_length;
- __be16 be_start_address;
+ u16 be_start_address;
dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length);
if (read_length > 1) {
dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length);
}
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * NOTE: Must use swab as wIndex is sent in little-endian
+ * byte order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vread_sync(dev, UMPC_MEMORY_READ,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, read_length);
if (status) {
struct device *dev = &serial->serial->dev->dev;
int status = 0;
int write_length;
- __be16 be_start_address;
+ u16 be_start_address;
/* We can only send a maximum of 1 aligned byte page at a time */
__func__, start_address, write_length);
usb_serial_debug_data(dev, __func__, write_length, buffer);
- /* Write first page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write first page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte order
+ * regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev,
UMPC_MEMORY_WRITE, (__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dev_dbg(dev, "%s - ERROR %d\n", __func__, status);
__func__, start_address, write_length);
usb_serial_debug_data(dev, __func__, write_length, buffer);
- /* Write next page */
- be_start_address = cpu_to_be16(start_address);
+ /*
+ * Write next page.
+ *
+ * NOTE: Must use swab as wIndex is sent in little-endian byte
+ * order regardless of host byte order.
+ */
+ be_start_address = swab16((u16)start_address);
status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE,
(__u16)address_type,
- (__force __u16)be_start_address,
+ be_start_address,
buffer, write_length);
if (status) {
dev_err(dev, "%s - ERROR %d\n", __func__, status);
if (rom_desc->Type == desc_type)
return start_address;
- start_address = start_address + sizeof(struct ti_i2c_desc)
- + rom_desc->Size;
+ start_address = start_address + sizeof(struct ti_i2c_desc) +
+ le16_to_cpu(rom_desc->Size);
} while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type);
__u16 i;
__u8 cs = 0;
- for (i = 0; i < rom_desc->Size; i++)
+ for (i = 0; i < le16_to_cpu(rom_desc->Size); i++)
cs = (__u8)(cs + buffer[i]);
if (cs != rom_desc->CheckSum) {
break;
if ((start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size) > TI_MAX_I2C_SIZE) {
+ le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__);
break;
/* Read the descriptor data */
status = read_rom(serial, start_address +
sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size),
+ buffer);
if (status)
break;
break;
}
start_address = start_address + sizeof(struct ti_i2c_desc) +
- rom_desc->Size;
+ le16_to_cpu(rom_desc->Size);
} while ((rom_desc->Type != I2C_DESC_TYPE_ION) &&
(start_address < TI_MAX_I2C_SIZE));
/* Read the descriptor data */
status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc),
- rom_desc->Size, buffer);
+ le16_to_cpu(rom_desc->Size), buffer);
if (status)
goto exit;
#define QUALCOMM_VENDOR_ID 0x05C6
#define CMOTECH_VENDOR_ID 0x16d8
-#define CMOTECH_PRODUCT_6008 0x6008
-#define CMOTECH_PRODUCT_6280 0x6280
+#define CMOTECH_PRODUCT_6001 0x6001
+#define CMOTECH_PRODUCT_CMU_300 0x6002
+#define CMOTECH_PRODUCT_6003 0x6003
+#define CMOTECH_PRODUCT_6004 0x6004
+#define CMOTECH_PRODUCT_6005 0x6005
+#define CMOTECH_PRODUCT_CGU_628A 0x6006
+#define CMOTECH_PRODUCT_CHE_628S 0x6007
+#define CMOTECH_PRODUCT_CMU_301 0x6008
+#define CMOTECH_PRODUCT_CHU_628 0x6280
+#define CMOTECH_PRODUCT_CHU_628S 0x6281
+#define CMOTECH_PRODUCT_CDU_680 0x6803
+#define CMOTECH_PRODUCT_CDU_685A 0x6804
+#define CMOTECH_PRODUCT_CHU_720S 0x7001
+#define CMOTECH_PRODUCT_7002 0x7002
+#define CMOTECH_PRODUCT_CHU_629K 0x7003
+#define CMOTECH_PRODUCT_7004 0x7004
+#define CMOTECH_PRODUCT_7005 0x7005
+#define CMOTECH_PRODUCT_CGU_629 0x7006
+#define CMOTECH_PRODUCT_CHU_629S 0x700a
+#define CMOTECH_PRODUCT_CHU_720I 0x7211
+#define CMOTECH_PRODUCT_7212 0x7212
+#define CMOTECH_PRODUCT_7213 0x7213
+#define CMOTECH_PRODUCT_7251 0x7251
+#define CMOTECH_PRODUCT_7252 0x7252
+#define CMOTECH_PRODUCT_7253 0x7253
#define TELIT_VENDOR_ID 0x1bc7
#define TELIT_PRODUCT_UC864E 0x1003
#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define ALCATEL_PRODUCT_X220_X500D 0x0017
#define ALCATEL_PRODUCT_L100V 0x011e
+#define ALCATEL_PRODUCT_L800MA 0x0203
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
#define OLIVETTI_PRODUCT_OLICARD100 0xc000
#define OLIVETTI_PRODUCT_OLICARD145 0xc003
#define OLIVETTI_PRODUCT_OLICARD200 0xc005
+#define OLIVETTI_PRODUCT_OLICARD500 0xc00b
/* Celot products */
#define CELOT_VENDOR_ID 0x211f
.reserved = BIT(1) | BIT(2),
};
+static const struct option_blacklist_info net_intf0_blacklist = {
+ .reserved = BIT(0),
+};
+
static const struct option_blacklist_info net_intf1_blacklist = {
.reserved = BIT(1),
};
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
- { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
- { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213),
+ .driver_info = (kernel_ulong_t)&net_intf0_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251),
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252),
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
+ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253),
+ .driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
.driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200),
.driver_info = (kernel_ulong_t)&net_intf6_blacklist
},
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist
+ },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 0)}, /* Sierra Wireless MC7710 Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 2)}, /* Sierra Wireless MC7710 NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68a2, 3)}, /* Sierra Wireless MC7710 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 0)}, /* Sierra Wireless MC73xx Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 2)}, /* Sierra Wireless MC73xx NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x68c0, 3)}, /* Sierra Wireless MC73xx Modem */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 0)}, /* Sierra Wireless EM7355 Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 2)}, /* Sierra Wireless EM7355 NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901f, 3)}, /* Sierra Wireless EM7355 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 0)}, /* Sierra Wireless MC7305/MC7355 Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 2)}, /* Sierra Wireless MC7305/MC7355 NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9041, 3)}, /* Sierra Wireless MC7305/MC7355 Modem */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */
static void usb_serial_deregister(struct usb_serial_driver *device)
{
pr_info("USB Serial deregistering driver %s\n", device->description);
+
mutex_lock(&table_lock);
list_del(&device->driver_list);
- usb_serial_bus_deregister(device);
mutex_unlock(&table_lock);
+
+ usb_serial_bus_deregister(device);
}
/**
if (chid)
result = uwb_radio_start(&wusbhc->pal);
- else
+ else if (wusbhc->uwb_rc)
uwb_radio_stop(&wusbhc->pal);
return result;
done) {
dev_info(dev, "Control EP stall. Queue delayed work.\n");
- spin_lock_irq(&wa->xfer_list_lock);
+ spin_lock(&wa->xfer_list_lock);
/* move xfer from xfer_list to xfer_errored_list. */
list_move_tail(&xfer->list_node, &wa->xfer_errored_list);
- spin_unlock_irq(&wa->xfer_list_lock);
+ spin_unlock(&wa->xfer_list_lock);
spin_unlock_irqrestore(&xfer->lock, flags);
queue_work(wusbd, &wa->xfer_error_work);
} else {
struct uwb_rceb *reply, ssize_t reply_size)
{
struct uwb_rc_evt_set_drp_ie *r = (struct uwb_rc_evt_set_drp_ie *)reply;
+ unsigned long flags;
if (r != NULL) {
if (r->bResultCode != UWB_RC_RES_SUCCESS)
} else
dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: timeout\n");
- spin_lock_irq(&rc->rsvs_lock);
+ spin_lock_irqsave(&rc->rsvs_lock, flags);
if (rc->set_drp_ie_pending > 1) {
rc->set_drp_ie_pending = 0;
- uwb_rsv_queue_update(rc);
+ uwb_rsv_queue_update(rc);
} else {
- rc->set_drp_ie_pending = 0;
+ rc->set_drp_ie_pending = 0;
}
- spin_unlock_irq(&rc->rsvs_lock);
+ spin_unlock_irqrestore(&rc->rsvs_lock, flags);
}
/**
struct work_struct free_work;
+ /*
+ * signals when all in-flight requests are done
+ */
+ struct completion *requests_done;
+
struct {
/*
* This counts the number of available slots in the ringbuffer,
{
struct kioctx *ctx = container_of(ref, struct kioctx, reqs);
+ /* At this point we know that there are no any in-flight requests */
+ if (ctx->requests_done)
+ complete(ctx->requests_done);
+
INIT_WORK(&ctx->free_work, free_ioctx);
schedule_work(&ctx->free_work);
}
* when the processes owning a context have all exited to encourage
* the rapid destruction of the kioctx.
*/
-static void kill_ioctx(struct mm_struct *mm, struct kioctx *ctx)
+static void kill_ioctx(struct mm_struct *mm, struct kioctx *ctx,
+ struct completion *requests_done)
{
if (!atomic_xchg(&ctx->dead, 1)) {
struct kioctx_table *table;
if (ctx->mmap_size)
vm_munmap(ctx->mmap_base, ctx->mmap_size);
+ ctx->requests_done = requests_done;
percpu_ref_kill(&ctx->users);
+ } else {
+ if (requests_done)
+ complete(requests_done);
}
}
*/
ctx->mmap_size = 0;
- kill_ioctx(mm, ctx);
+ kill_ioctx(mm, ctx, NULL);
}
}
if (!IS_ERR(ioctx)) {
ret = put_user(ioctx->user_id, ctxp);
if (ret)
- kill_ioctx(current->mm, ioctx);
+ kill_ioctx(current->mm, ioctx, NULL);
percpu_ref_put(&ioctx->users);
}
{
struct kioctx *ioctx = lookup_ioctx(ctx);
if (likely(NULL != ioctx)) {
- kill_ioctx(current->mm, ioctx);
+ struct completion requests_done =
+ COMPLETION_INITIALIZER_ONSTACK(requests_done);
+
+ /* Pass requests_done to kill_ioctx() where it can be set
+ * in a thread-safe way. If we try to set it here then we have
+ * a race condition if two io_destroy() called simultaneously.
+ */
+ kill_ioctx(current->mm, ioctx, &requests_done);
percpu_ref_put(&ioctx->users);
+
+ /* Wait until all IO for the context are done. Otherwise kernel
+ * keep using user-space buffers even if user thinks the context
+ * is destroyed.
+ */
+ wait_for_completion(&requests_done);
+
return 0;
}
pr_debug("EINVAL: io_destroy: invalid context id\n");
&iovec, compat)
: aio_setup_single_vector(req, rw, buf, &nr_segs,
iovec);
- if (ret)
- return ret;
-
- ret = rw_verify_area(rw, file, &req->ki_pos, req->ki_nbytes);
+ if (!ret)
+ ret = rw_verify_area(rw, file, &req->ki_pos, req->ki_nbytes);
if (ret < 0) {
if (iovec != &inline_vec)
kfree(iovec);
#define btrfs_raw_test_opt(o, opt) ((o) & BTRFS_MOUNT_##opt)
#define btrfs_test_opt(root, opt) ((root)->fs_info->mount_opt & \
BTRFS_MOUNT_##opt)
+#define btrfs_set_and_info(root, opt, fmt, args...) \
+{ \
+ if (!btrfs_test_opt(root, opt)) \
+ btrfs_info(root->fs_info, fmt, ##args); \
+ btrfs_set_opt(root->fs_info->mount_opt, opt); \
+}
+
+#define btrfs_clear_and_info(root, opt, fmt, args...) \
+{ \
+ if (btrfs_test_opt(root, opt)) \
+ btrfs_info(root->fs_info, fmt, ##args); \
+ btrfs_clear_opt(root->fs_info->mount_opt, opt); \
+}
+
/*
* Inode flags
*/
printk(KERN_ERR "BTRFS: failed to read log tree\n");
free_extent_buffer(log_tree_root->node);
kfree(log_tree_root);
- goto fail_trans_kthread;
+ goto fail_qgroup;
}
/* returns with log_tree_root freed on success */
ret = btrfs_recover_log_trees(log_tree_root);
"Failed to recover log tree");
free_extent_buffer(log_tree_root->node);
kfree(log_tree_root);
- goto fail_trans_kthread;
+ goto fail_qgroup;
}
if (sb->s_flags & MS_RDONLY) {
ret = btrfs_commit_super(tree_root);
if (ret)
- goto fail_trans_kthread;
+ goto fail_qgroup;
}
}
ret = btrfs_find_orphan_roots(tree_root);
if (ret)
- goto fail_trans_kthread;
+ goto fail_qgroup;
if (!(sb->s_flags & MS_RDONLY)) {
ret = btrfs_cleanup_fs_roots(fs_info);
if (ret)
- goto fail_trans_kthread;
+ goto fail_qgroup;
ret = btrfs_recover_relocation(tree_root);
if (ret < 0) {
ret = 0;
}
if (ret) {
+ key.objectid = bytenr;
key.type = BTRFS_EXTENT_ITEM_KEY;
key.offset = num_bytes;
btrfs_release_path(path);
return extended_to_chunk(flags | tmp);
}
-static u64 get_alloc_profile(struct btrfs_root *root, u64 flags)
+static u64 get_alloc_profile(struct btrfs_root *root, u64 orig_flags)
{
unsigned seq;
+ u64 flags;
do {
+ flags = orig_flags;
seq = read_seqbegin(&root->fs_info->profiles_lock);
if (flags & BTRFS_BLOCK_GROUP_DATA)
if (ret > 0 && skinny_metadata) {
skinny_metadata = false;
+ key.objectid = bytenr;
key.type = BTRFS_EXTENT_ITEM_KEY;
key.offset = num_bytes;
btrfs_release_path(path);
if (start > key.offset && end < extent_end) {
BUG_ON(del_nr > 0);
if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
- ret = -EINVAL;
+ ret = -EOPNOTSUPP;
break;
}
*/
if (start <= key.offset && end < extent_end) {
if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
- ret = -EINVAL;
+ ret = -EOPNOTSUPP;
break;
}
if (start > key.offset && end >= extent_end) {
BUG_ON(del_nr > 0);
if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
- ret = -EINVAL;
+ ret = -EOPNOTSUPP;
break;
}
start_pos = round_down(pos, root->sectorsize);
if (start_pos > i_size_read(inode)) {
/* Expand hole size to cover write data, preventing empty gap */
- end_pos = round_up(pos + iov->iov_len, root->sectorsize);
+ end_pos = round_up(pos + count, root->sectorsize);
err = btrfs_cont_expand(inode, i_size_read(inode), end_pos);
if (err) {
mutex_unlock(&inode->i_mutex);
tsk = kthread_run(caching_kthread, root, "btrfs-ino-cache-%llu\n",
root->root_key.objectid);
- BUG_ON(IS_ERR(tsk)); /* -ENOMEM */
+ if (IS_ERR(tsk)) {
+ btrfs_warn(root->fs_info, "failed to start inode caching task");
+ btrfs_clear_and_info(root, CHANGE_INODE_CACHE,
+ "disabling inode map caching");
+ }
}
int btrfs_find_free_ino(struct btrfs_root *root, u64 *objectid)
void btrfs_return_ino(struct btrfs_root *root, u64 objectid)
{
- struct btrfs_free_space_ctl *ctl = root->free_ino_ctl;
struct btrfs_free_space_ctl *pinned = root->free_ino_pinned;
if (!btrfs_test_opt(root, INODE_MAP_CACHE))
return;
-
again:
if (root->cached == BTRFS_CACHE_FINISHED) {
- __btrfs_add_free_space(ctl, objectid, 1);
+ __btrfs_add_free_space(pinned, objectid, 1);
} else {
- /*
- * If we are in the process of caching free ino chunks,
- * to avoid adding the same inode number to the free_ino
- * tree twice due to cross transaction, we'll leave it
- * in the pinned tree until a transaction is committed
- * or the caching work is done.
- */
-
down_write(&root->fs_info->commit_root_sem);
spin_lock(&root->cache_lock);
if (root->cached == BTRFS_CACHE_FINISHED) {
start_caching(root);
- if (objectid <= root->cache_progress ||
- objectid >= root->highest_objectid)
- __btrfs_add_free_space(ctl, objectid, 1);
- else
- __btrfs_add_free_space(pinned, objectid, 1);
+ __btrfs_add_free_space(pinned, objectid, 1);
up_write(&root->fs_info->commit_root_sem);
}
new_key.offset + datal,
1);
if (ret) {
- if (ret != -EINVAL)
+ if (ret != -EOPNOTSUPP)
btrfs_abort_transaction(trans,
root, ret);
btrfs_end_transaction(trans, root);
new_key.offset + datal,
1);
if (ret) {
- if (ret != -EINVAL)
+ if (ret != -EOPNOTSUPP)
btrfs_abort_transaction(trans,
root, ret);
btrfs_end_transaction(trans, root);
if (p->buf_len >= len)
return 0;
+ if (len > PATH_MAX) {
+ WARN_ON(1);
+ return -ENOMEM;
+ }
+
path_len = p->end - p->start;
old_buf_len = p->buf_len;
{Opt_err, NULL},
};
-#define btrfs_set_and_info(root, opt, fmt, args...) \
-{ \
- if (!btrfs_test_opt(root, opt)) \
- btrfs_info(root->fs_info, fmt, ##args); \
- btrfs_set_opt(root->fs_info->mount_opt, opt); \
-}
-
-#define btrfs_clear_and_info(root, opt, fmt, args...) \
-{ \
- if (btrfs_test_opt(root, opt)) \
- btrfs_info(root->fs_info, fmt, ##args); \
- btrfs_clear_opt(root->fs_info->mount_opt, opt); \
-}
-
/*
* Regular mount options parser. Everything that is needed only when
* reading in a new superblock is parsed here.
return ERR_PTR(-ENOMEM);
mnt = vfs_kern_mount(&btrfs_fs_type, flags, device_name,
newargs);
- kfree(newargs);
if (PTR_RET(mnt) == -EBUSY) {
if (flags & MS_RDONLY) {
int r;
mnt = vfs_kern_mount(&btrfs_fs_type, flags | MS_RDONLY, device_name,
newargs);
- if (IS_ERR(mnt))
+ if (IS_ERR(mnt)) {
+ kfree(newargs);
return ERR_CAST(mnt);
+ }
r = btrfs_remount(mnt->mnt_sb, &flags, NULL);
if (r < 0) {
/* FIXME: release vfsmount mnt ??*/
+ kfree(newargs);
return ERR_PTR(r);
}
}
}
+ kfree(newargs);
+
if (IS_ERR(mnt))
return ERR_CAST(mnt);
if (!S_ISREG(inode->i_mode))
return -EOPNOTSUPP;
- if (IS_SWAPFILE(inode))
- return -ETXTBSY;
-
mutex_lock(&inode->i_mutex);
if (ceph_snap(inode) != CEPH_NOSNAP) {
case F_GETLK64:
case F_SETLK64:
case F_SETLKW64:
- case F_GETLKP:
- case F_SETLKP:
- case F_SETLKPW:
+ case F_OFD_GETLK:
+ case F_OFD_SETLK:
+ case F_OFD_SETLKW:
ret = get_compat_flock64(&f, compat_ptr(arg));
if (ret != 0)
break;
conv_cmd = convert_fcntl_cmd(cmd);
ret = sys_fcntl(fd, conv_cmd, (unsigned long)&f);
set_fs(old_fs);
- if ((conv_cmd == F_GETLK || conv_cmd == F_GETLKP) && ret == 0) {
+ if ((conv_cmd == F_GETLK || conv_cmd == F_OFD_GETLK) && ret == 0) {
/* need to return lock information - see above for commentary */
if (f.l_start > COMPAT_LOFF_T_MAX)
ret = -EOVERFLOW;
case F_GETLK64:
case F_SETLK64:
case F_SETLKW64:
- case F_GETLKP:
- case F_SETLKP:
- case F_SETLKPW:
+ case F_OFD_GETLK:
+ case F_OFD_SETLK:
+ case F_OFD_SETLKW:
return -EINVAL;
}
return compat_sys_fcntl64(fd, cmd, arg);
continue;
x = ext4_count_free(bitmap_bh->b_data,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ EXT4_CLUSTERS_PER_GROUP(sb) / 8);
printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n",
i, ext4_free_group_clusters(sb, gdp), x);
bitmap_count += x;
up_write(&EXT4_I(inode)->i_data_sem);
}
-/*
- * Update i_disksize after writeback has been started. Races with truncate
- * are avoided by checking i_size under i_data_sem.
- */
-static inline void ext4_wb_update_i_disksize(struct inode *inode, loff_t newsize)
-{
- loff_t i_size;
-
- down_write(&EXT4_I(inode)->i_data_sem);
- i_size = i_size_read(inode);
- if (newsize > i_size)
- newsize = i_size;
- if (newsize > EXT4_I(inode)->i_disksize)
- EXT4_I(inode)->i_disksize = newsize;
- up_write(&EXT4_I(inode)->i_data_sem);
-}
-
struct ext4_group_info {
unsigned long bb_state;
struct rb_root bb_free_root;
return PTR_ERR(path);
depth = ext_depth(inode);
ex = path[depth].p_ext;
+ if (!ex) {
+ EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
+ (unsigned long) map->m_lblk);
+ return -EIO;
+ }
uninitialized = ext4_ext_is_uninitialized(ex);
split_flag1 = 0;
}
depth = ext_depth(inode);
ex = path[depth].p_ext;
+ if (!ex) {
+ EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
+ (unsigned long) map->m_lblk);
+ err = -EIO;
+ goto out;
+ }
}
err = ext4_ext_get_access(handle, inode, path + depth);
trace_ext4_zero_range(inode, offset, len, mode);
+ if (!S_ISREG(inode->i_mode))
+ return -EINVAL;
+
/*
* Write out all dirty pages to avoid race conditions
* Then release them.
if (mode & FALLOC_FL_PUNCH_HOLE)
return ext4_punch_hole(inode, offset, len);
- if (mode & FALLOC_FL_COLLAPSE_RANGE)
- return ext4_collapse_range(inode, offset, len);
-
ret = ext4_convert_inline_data(inode);
if (ret)
return ret;
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
return -EOPNOTSUPP;
+ if (mode & FALLOC_FL_COLLAPSE_RANGE)
+ return ext4_collapse_range(inode, offset, len);
+
if (mode & FALLOC_FL_ZERO_RANGE)
return ext4_zero_range(file, offset, len, mode);
if (ex_start == EXT_FIRST_EXTENT(path[depth].p_hdr))
update = 1;
- *start = ex_last->ee_block +
+ *start = le32_to_cpu(ex_last->ee_block) +
ext4_ext_get_actual_len(ex_last);
while (ex_start <= ex_last) {
- ex_start->ee_block -= shift;
- if (ex_start >
- EXT_FIRST_EXTENT(path[depth].p_hdr)) {
- if (ext4_ext_try_to_merge_right(inode,
- path, ex_start - 1))
- ex_last--;
- }
- ex_start++;
+ le32_add_cpu(&ex_start->ee_block, -shift);
+ /* Try to merge to the left. */
+ if ((ex_start >
+ EXT_FIRST_EXTENT(path[depth].p_hdr)) &&
+ ext4_ext_try_to_merge_right(inode,
+ path, ex_start - 1))
+ ex_last--;
+ else
+ ex_start++;
}
err = ext4_ext_dirty(handle, inode, path + depth);
if (err)
if (err)
goto out;
- path[depth].p_idx->ei_block -= shift;
+ le32_add_cpu(&path[depth].p_idx->ei_block, -shift);
err = ext4_ext_dirty(handle, inode, path + depth);
if (err)
goto out;
return ret;
}
- stop_block = extent->ee_block + ext4_ext_get_actual_len(extent);
+ stop_block = le32_to_cpu(extent->ee_block) +
+ ext4_ext_get_actual_len(extent);
ext4_ext_drop_refs(path);
kfree(path);
* enough to accomodate the shift.
*/
path = ext4_ext_find_extent(inode, start - 1, NULL, 0);
+ if (IS_ERR(path))
+ return PTR_ERR(path);
depth = path->p_depth;
extent = path[depth].p_ext;
- ex_start = extent->ee_block;
- ex_end = extent->ee_block + ext4_ext_get_actual_len(extent);
+ if (extent) {
+ ex_start = le32_to_cpu(extent->ee_block);
+ ex_end = le32_to_cpu(extent->ee_block) +
+ ext4_ext_get_actual_len(extent);
+ } else {
+ ex_start = 0;
+ ex_end = 0;
+ }
ext4_ext_drop_refs(path);
kfree(path);
return PTR_ERR(path);
depth = path->p_depth;
extent = path[depth].p_ext;
- current_block = extent->ee_block;
+ if (!extent) {
+ EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
+ (unsigned long) start);
+ return -EIO;
+ }
+
+ current_block = le32_to_cpu(extent->ee_block);
if (start > current_block) {
/* Hole, move to the next extent */
ret = mext_next_extent(inode, path, &extent);
ext4_lblk_t punch_start, punch_stop;
handle_t *handle;
unsigned int credits;
- loff_t new_size;
+ loff_t new_size, ioffset;
int ret;
- BUG_ON(offset + len > i_size_read(inode));
-
/* Collapse range works only on fs block size aligned offsets. */
if (offset & (EXT4_BLOCK_SIZE(sb) - 1) ||
len & (EXT4_BLOCK_SIZE(sb) - 1))
return -EINVAL;
if (!S_ISREG(inode->i_mode))
+ return -EINVAL;
+
+ if (EXT4_SB(inode->i_sb)->s_cluster_ratio > 1)
return -EOPNOTSUPP;
trace_ext4_collapse_range(inode, offset, len);
punch_start = offset >> EXT4_BLOCK_SIZE_BITS(sb);
punch_stop = (offset + len) >> EXT4_BLOCK_SIZE_BITS(sb);
+ /* Call ext4_force_commit to flush all data in case of data=journal. */
+ if (ext4_should_journal_data(inode)) {
+ ret = ext4_force_commit(inode->i_sb);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Need to round down offset to be aligned with page size boundary
+ * for page size > block size.
+ */
+ ioffset = round_down(offset, PAGE_SIZE);
+
/* Write out all dirty pages */
- ret = filemap_write_and_wait_range(inode->i_mapping, offset, -1);
+ ret = filemap_write_and_wait_range(inode->i_mapping, ioffset,
+ LLONG_MAX);
if (ret)
return ret;
/* Take mutex lock */
mutex_lock(&inode->i_mutex);
- /* It's not possible punch hole on append only file */
- if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) {
- ret = -EPERM;
- goto out_mutex;
- }
-
- if (IS_SWAPFILE(inode)) {
- ret = -ETXTBSY;
+ /*
+ * There is no need to overlap collapse range with EOF, in which case
+ * it is effectively a truncate operation
+ */
+ if (offset + len >= i_size_read(inode)) {
+ ret = -EINVAL;
goto out_mutex;
}
goto out_mutex;
}
- truncate_pagecache_range(inode, offset, -1);
+ truncate_pagecache(inode, ioffset);
/* Wait for existing dio to complete */
ext4_inode_block_unlocked_dio(inode);
ext4_discard_preallocations(inode);
ret = ext4_es_remove_extent(inode, punch_start,
- EXT_MAX_BLOCKS - punch_start - 1);
+ EXT_MAX_BLOCKS - punch_start);
if (ret) {
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
up_write(&EXT4_I(inode)->i_data_sem);
goto out_stop;
}
+ ext4_discard_preallocations(inode);
ret = ext4_ext_shift_extents(inode, handle, punch_stop,
punch_stop - punch_start);
}
new_size = i_size_read(inode) - len;
- truncate_setsize(inode, new_size);
+ i_size_write(inode, new_size);
EXT4_I(inode)->i_disksize = new_size;
- ext4_discard_preallocations(inode);
up_write(&EXT4_I(inode)->i_data_sem);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
newes.es_lblk = end + 1;
newes.es_len = len2;
- block = 0x7FDEADBEEF;
+ block = 0x7FDEADBEEFULL;
if (ext4_es_is_written(&orig_es) ||
ext4_es_is_unwritten(&orig_es))
block = ext4_es_pblock(&orig_es) +
size_t count = iov_length(iov, nr_segs);
loff_t final_size = pos + count;
- if (pos >= inode->i_size)
+ if (pos >= i_size_read(inode))
return 0;
if ((pos & blockmask) || (final_size & blockmask))
if (unlikely(map->m_len > INT_MAX))
map->m_len = INT_MAX;
+ /* We can handle the block number less than EXT_MAX_BLOCKS */
+ if (unlikely(map->m_lblk >= EXT_MAX_BLOCKS))
+ return -EIO;
+
/* Lookup extent status tree firstly */
if (ext4_es_lookup_extent(inode, map->m_lblk, &es)) {
ext4_es_lru_add(inode);
return err;
} while (map->m_len);
- /* Update on-disk size after IO is submitted */
+ /*
+ * Update on-disk size after IO is submitted. Races with
+ * truncate are avoided by checking i_size under i_data_sem.
+ */
disksize = ((loff_t)mpd->first_page) << PAGE_CACHE_SHIFT;
if (disksize > EXT4_I(inode)->i_disksize) {
int err2;
-
- ext4_wb_update_i_disksize(inode, disksize);
+ loff_t i_size;
+
+ down_write(&EXT4_I(inode)->i_data_sem);
+ i_size = i_size_read(inode);
+ if (disksize > i_size)
+ disksize = i_size;
+ if (disksize > EXT4_I(inode)->i_disksize)
+ EXT4_I(inode)->i_disksize = disksize;
err2 = ext4_mark_inode_dirty(handle, inode);
+ up_write(&EXT4_I(inode)->i_data_sem);
if (err2)
ext4_error(inode->i_sb,
"Failed to mark inode %lu dirty",
}
mutex_lock(&inode->i_mutex);
- /* It's not possible punch hole on append only file */
- if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) {
- ret = -EPERM;
- goto out_mutex;
- }
- if (IS_SWAPFILE(inode)) {
- ret = -ETXTBSY;
- goto out_mutex;
- }
/* No need to punch hole beyond i_size */
if (offset >= inode->i_size)
ret = ext4_free_hole_blocks(handle, inode, first_block,
stop_block);
- ext4_discard_preallocations(inode);
up_write(&EXT4_I(inode)->i_data_sem);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
*
* We are called from a few places:
*
- * - Within generic_file_write() for O_SYNC files.
+ * - Within generic_file_aio_write() -> generic_write_sync() for O_SYNC files.
* Here, there will be no transaction running. We wait for any running
* transaction to commit.
*
- * - Within sys_sync(), kupdate and such.
- * We wait on commit, if tol to.
+ * - Within flush work (sys_sync(), kupdate and such).
+ * We wait on commit, if told to.
*
- * - Within prune_icache() (PF_MEMALLOC == true)
- * Here we simply return. We can't afford to block kswapd on the
- * journal commit.
+ * - Within iput_final() -> write_inode_now()
+ * We wait on commit, if told to.
*
* In all cases it is actually safe for us to return without doing anything,
* because the inode has been copied into a raw inode buffer in
- * ext4_mark_inode_dirty(). This is a correctness thing for O_SYNC and for
- * knfsd.
+ * ext4_mark_inode_dirty(). This is a correctness thing for WB_SYNC_ALL
+ * writeback.
*
* Note that we are absolutely dependent upon all inode dirtiers doing the
* right thing: they *must* call mark_inode_dirty() after dirtying info in
* stuff();
* inode->i_size = expr;
*
- * is in error because a kswapd-driven write_inode() could occur while
- * `stuff()' is running, and the new i_size will be lost. Plus the inode
- * will no longer be on the superblock's dirty inode list.
+ * is in error because write_inode() could occur while `stuff()' is running,
+ * and the new i_size will be lost. Plus the inode will no longer be on the
+ * superblock's dirty inode list.
*/
int ext4_write_inode(struct inode *inode, struct writeback_control *wbc)
{
int err;
- if (current->flags & PF_MEMALLOC)
+ if (WARN_ON_ONCE(current->flags & PF_MEMALLOC))
return 0;
if (EXT4_SB(inode->i_sb)->s_journal) {
poff = block % blocks_per_page;
page = find_or_create_page(inode->i_mapping, pnum, GFP_NOFS);
if (!page)
- return -EIO;
+ return -ENOMEM;
BUG_ON(page->mapping != inode->i_mapping);
e4b->bd_bitmap_page = page;
e4b->bd_bitmap = page_address(page) + (poff * sb->s_blocksize);
pnum = block / blocks_per_page;
page = find_or_create_page(inode->i_mapping, pnum, GFP_NOFS);
if (!page)
- return -EIO;
+ return -ENOMEM;
BUG_ON(page->mapping != inode->i_mapping);
e4b->bd_buddy_page = page;
return 0;
unlock_page(page);
}
}
- if (page == NULL || !PageUptodate(page)) {
+ if (page == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ if (!PageUptodate(page)) {
ret = -EIO;
goto err;
}
unlock_page(page);
}
}
- if (page == NULL || !PageUptodate(page)) {
+ if (page == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ if (!PageUptodate(page)) {
ret = -EIO;
goto err;
}
*/
static int ext4_trim_extent(struct super_block *sb, int start, int count,
ext4_group_t group, struct ext4_buddy *e4b)
+__releases(bitlock)
+__acquires(bitlock)
{
struct ext4_free_extent ex;
int ret = 0;
if (error) {
struct inode *inode = io_end->inode;
- ext4_warning(inode->i_sb, "I/O error writing to inode %lu "
+ ext4_warning(inode->i_sb, "I/O error %d writing to inode %lu "
"(offset %llu size %ld starting block %llu)",
- inode->i_ino,
+ error, inode->i_ino,
(unsigned long long) io_end->offset,
(long) io_end->size,
(unsigned long long)
bi_sector >> (inode->i_blkbits - 9));
+ mapping_set_error(inode->i_mapping, error);
}
if (io_end->flag & EXT4_IO_END_UNWRITTEN) {
goto failed_mount2;
}
}
+
+ /*
+ * set up enough so that it can read an inode,
+ * and create new inode for buddy allocator
+ */
+ sbi->s_gdb_count = db_count;
+ if (!test_opt(sb, NOLOAD) &&
+ EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
+ sb->s_op = &ext4_sops;
+ else
+ sb->s_op = &ext4_nojournal_sops;
+
+ ext4_ext_init(sb);
+ err = ext4_mb_init(sb);
+ if (err) {
+ ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
+ err);
+ goto failed_mount2;
+ }
+
if (!ext4_check_descriptors(sb, &first_not_zeroed)) {
ext4_msg(sb, KERN_ERR, "group descriptors corrupted!");
- goto failed_mount2;
+ goto failed_mount2a;
}
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
if (!ext4_fill_flex_info(sb)) {
ext4_msg(sb, KERN_ERR,
"unable to initialize "
"flex_bg meta info!");
- goto failed_mount2;
+ goto failed_mount2a;
}
- sbi->s_gdb_count = db_count;
get_random_bytes(&sbi->s_next_generation, sizeof(u32));
spin_lock_init(&sbi->s_next_gen_lock);
sbi->s_stripe = ext4_get_stripe_size(sbi);
sbi->s_extent_max_zeroout_kb = 32;
- /*
- * set up enough so that it can read an inode
- */
- if (!test_opt(sb, NOLOAD) &&
- EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
- sb->s_op = &ext4_sops;
- else
- sb->s_op = &ext4_nojournal_sops;
sb->s_export_op = &ext4_export_ops;
sb->s_xattr = ext4_xattr_handlers;
#ifdef CONFIG_QUOTA
if (err) {
ext4_msg(sb, KERN_ERR, "failed to reserve %llu clusters for "
"reserved pool", ext4_calculate_resv_clusters(sb));
- goto failed_mount4a;
+ goto failed_mount5;
}
err = ext4_setup_system_zone(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize system "
"zone (%d)", err);
- goto failed_mount4a;
- }
-
- ext4_ext_init(sb);
- err = ext4_mb_init(sb);
- if (err) {
- ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
- err);
goto failed_mount5;
}
failed_mount7:
ext4_unregister_li_request(sb);
failed_mount6:
- ext4_mb_release(sb);
-failed_mount5:
- ext4_ext_release(sb);
ext4_release_system_zone(sb);
-failed_mount4a:
+failed_mount5:
dput(sb->s_root);
sb->s_root = NULL;
failed_mount4:
percpu_counter_destroy(&sbi->s_extent_cache_cnt);
if (sbi->s_mmp_tsk)
kthread_stop(sbi->s_mmp_tsk);
+failed_mount2a:
+ ext4_mb_release(sb);
failed_mount2:
for (i = 0; i < db_count; i++)
brelse(sbi->s_group_desc[i]);
ext4_kvfree(sbi->s_group_desc);
failed_mount:
+ ext4_ext_release(sb);
if (sbi->s_chksum_driver)
crypto_free_shash(sbi->s_chksum_driver);
if (sbi->s_proc) {
}
/*
- * Release the xattr block BH: If the reference count is > 1, decrement
- * it; otherwise free the block.
+ * Release the xattr block BH: If the reference count is > 1, decrement it;
+ * otherwise free the block.
*/
static void
ext4_xattr_release_block(handle_t *handle, struct inode *inode,
if (ce)
mb_cache_entry_free(ce);
get_bh(bh);
+ unlock_buffer(bh);
ext4_free_blocks(handle, inode, bh, 0, 1,
EXT4_FREE_BLOCKS_METADATA |
EXT4_FREE_BLOCKS_FORGET);
- unlock_buffer(bh);
} else {
le32_add_cpu(&BHDR(bh)->h_refcount, -1);
if (ce)
mb_cache_entry_release(ce);
+ /*
+ * Beware of this ugliness: Releasing of xattr block references
+ * from different inodes can race and so we have to protect
+ * from a race where someone else frees the block (and releases
+ * its journal_head) before we are done dirtying the buffer. In
+ * nojournal mode this race is harmless and we actually cannot
+ * call ext4_handle_dirty_xattr_block() with locked buffer as
+ * that function can call sync_dirty_buffer() so for that case
+ * we handle the dirtying after unlocking the buffer.
+ */
+ if (ext4_handle_valid(handle))
+ error = ext4_handle_dirty_xattr_block(handle, inode,
+ bh);
unlock_buffer(bh);
- error = ext4_handle_dirty_xattr_block(handle, inode, bh);
+ if (!ext4_handle_valid(handle))
+ error = ext4_handle_dirty_xattr_block(handle, inode,
+ bh);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
dquot_free_block(inode, EXT4_C2B(EXT4_SB(inode->i_sb), 1));
break;
#if BITS_PER_LONG != 32
/* 32-bit arches must use fcntl64() */
- case F_GETLKP:
+ case F_OFD_GETLK:
#endif
case F_GETLK:
err = fcntl_getlk(filp, cmd, (struct flock __user *) arg);
break;
#if BITS_PER_LONG != 32
/* 32-bit arches must use fcntl64() */
- case F_SETLKP:
- case F_SETLKPW:
+ case F_OFD_SETLK:
+ case F_OFD_SETLKW:
#endif
/* Fallthrough */
case F_SETLK:
switch (cmd) {
case F_GETLK64:
- case F_GETLKP:
+ case F_OFD_GETLK:
err = fcntl_getlk64(f.file, cmd, (struct flock64 __user *) arg);
break;
case F_SETLK64:
case F_SETLKW64:
- case F_SETLKP:
- case F_SETLKPW:
+ case F_OFD_SETLK:
+ case F_OFD_SETLKW:
err = fcntl_setlk64(fd, f.file, cmd,
(struct flock64 __user *) arg);
break;
struct rb_node **node = &kn->parent->dir.children.rb_node;
struct rb_node *parent = NULL;
- if (kernfs_type(kn) == KERNFS_DIR)
- kn->parent->dir.subdirs++;
-
while (*node) {
struct kernfs_node *pos;
int result;
else
return -EEXIST;
}
+
/* add new node and rebalance the tree */
rb_link_node(&kn->rb, parent, node);
rb_insert_color(&kn->rb, &kn->parent->dir.children);
+
+ /* successfully added, account subdir number */
+ if (kernfs_type(kn) == KERNFS_DIR)
+ kn->parent->dir.subdirs++;
+
return 0;
}
ops = kernfs_ops(of->kn);
rc = ops->mmap(of, vma);
+ if (rc)
+ goto out_put;
/*
* PowerPC's pci_mmap of legacy_mem uses shmem_zero_setup()
#define IS_POSIX(fl) (fl->fl_flags & FL_POSIX)
#define IS_FLOCK(fl) (fl->fl_flags & FL_FLOCK)
#define IS_LEASE(fl) (fl->fl_flags & (FL_LEASE|FL_DELEG))
-#define IS_FILE_PVT(fl) (fl->fl_flags & FL_FILE_PVT)
+#define IS_OFDLCK(fl) (fl->fl_flags & FL_OFDLCK)
static bool lease_breaking(struct file_lock *fl)
{
BUG_ON(!list_empty(&waiter->fl_block));
waiter->fl_next = blocker;
list_add_tail(&waiter->fl_block, &blocker->fl_block);
- if (IS_POSIX(blocker) && !IS_FILE_PVT(blocker))
+ if (IS_POSIX(blocker) && !IS_OFDLCK(blocker))
locks_insert_global_blocked(waiter);
}
* of tasks (such as posix threads) sharing the same open file table.
* To handle those cases, we just bail out after a few iterations.
*
- * For FL_FILE_PVT locks, the owner is the filp, not the files_struct.
+ * For FL_OFDLCK locks, the owner is the filp, not the files_struct.
* Because the owner is not even nominally tied to a thread of
* execution, the deadlock detection below can't reasonably work well. Just
* skip it for those.
*
- * In principle, we could do a more limited deadlock detection on FL_FILE_PVT
+ * In principle, we could do a more limited deadlock detection on FL_OFDLCK
* locks that just checks for the case where two tasks are attempting to
* upgrade from read to write locks on the same inode.
*/
/*
* This deadlock detector can't reasonably detect deadlocks with
- * FL_FILE_PVT locks, since they aren't owned by a process, per-se.
+ * FL_OFDLCK locks, since they aren't owned by a process, per-se.
*/
- if (IS_FILE_PVT(caller_fl))
+ if (IS_OFDLCK(caller_fl))
return 0;
while ((block_fl = what_owner_is_waiting_for(block_fl))) {
restart:
break_time = flock->fl_break_time;
- if (break_time != 0) {
+ if (break_time != 0)
break_time -= jiffies;
- if (break_time == 0)
- break_time++;
- }
+ if (break_time == 0)
+ break_time++;
locks_insert_block(flock, new_fl);
spin_unlock(&inode->i_lock);
error = wait_event_interruptible_timeout(new_fl->fl_wait,
static int posix_lock_to_flock(struct flock *flock, struct file_lock *fl)
{
- flock->l_pid = IS_FILE_PVT(fl) ? -1 : fl->fl_pid;
+ flock->l_pid = IS_OFDLCK(fl) ? -1 : fl->fl_pid;
#if BITS_PER_LONG == 32
/*
* Make sure we can represent the posix lock via
#if BITS_PER_LONG == 32
static void posix_lock_to_flock64(struct flock64 *flock, struct file_lock *fl)
{
- flock->l_pid = IS_FILE_PVT(fl) ? -1 : fl->fl_pid;
+ flock->l_pid = IS_OFDLCK(fl) ? -1 : fl->fl_pid;
flock->l_start = fl->fl_start;
flock->l_len = fl->fl_end == OFFSET_MAX ? 0 :
fl->fl_end - fl->fl_start + 1;
if (error)
goto out;
- if (cmd == F_GETLKP) {
+ if (cmd == F_OFD_GETLK) {
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
cmd = F_GETLK;
- file_lock.fl_flags |= FL_FILE_PVT;
+ file_lock.fl_flags |= FL_OFDLCK;
file_lock.fl_owner = (fl_owner_t)filp;
}
/*
* If the cmd is requesting file-private locks, then set the
- * FL_FILE_PVT flag and override the owner.
+ * FL_OFDLCK flag and override the owner.
*/
switch (cmd) {
- case F_SETLKP:
+ case F_OFD_SETLK:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
cmd = F_SETLK;
- file_lock->fl_flags |= FL_FILE_PVT;
+ file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = (fl_owner_t)filp;
break;
- case F_SETLKPW:
+ case F_OFD_SETLKW:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
cmd = F_SETLKW;
- file_lock->fl_flags |= FL_FILE_PVT;
+ file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = (fl_owner_t)filp;
/* Fallthrough */
case F_SETLKW:
if (error)
goto out;
- if (cmd == F_GETLKP) {
+ if (cmd == F_OFD_GETLK) {
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
cmd = F_GETLK64;
- file_lock.fl_flags |= FL_FILE_PVT;
+ file_lock.fl_flags |= FL_OFDLCK;
file_lock.fl_owner = (fl_owner_t)filp;
}
/*
* If the cmd is requesting file-private locks, then set the
- * FL_FILE_PVT flag and override the owner.
+ * FL_OFDLCK flag and override the owner.
*/
switch (cmd) {
- case F_SETLKP:
+ case F_OFD_SETLK:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
cmd = F_SETLK64;
- file_lock->fl_flags |= FL_FILE_PVT;
+ file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = (fl_owner_t)filp;
break;
- case F_SETLKPW:
+ case F_OFD_SETLKW:
error = -EINVAL;
if (flock.l_pid != 0)
goto out;
cmd = F_SETLKW64;
- file_lock->fl_flags |= FL_FILE_PVT;
+ file_lock->fl_flags |= FL_OFDLCK;
file_lock->fl_owner = (fl_owner_t)filp;
/* Fallthrough */
case F_SETLKW64:
if (IS_POSIX(fl)) {
if (fl->fl_flags & FL_ACCESS)
seq_printf(f, "ACCESS");
- else if (IS_FILE_PVT(fl))
- seq_printf(f, "FLPVT ");
+ else if (IS_OFDLCK(fl))
+ seq_printf(f, "OFDLCK");
else
seq_printf(f, "POSIX ");
static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *conn, struct nfsd4_session *ses)
{
+ int maxtime = max_cb_time(clp->net);
struct rpc_timeout timeparms = {
- .to_initval = max_cb_time(clp->net),
+ .to_initval = maxtime,
.to_retries = 0,
+ .to_maxval = maxtime,
};
struct rpc_create_args args = {
.net = clp->net,
/* nfsd4_check_resp_size guarantees enough room for error status */
if (!op->status)
op->status = nfsd4_check_resp_size(resp, 0);
- if (op->status == nfserr_resource && nfsd4_has_session(&resp->cstate)) {
- struct nfsd4_slot *slot = resp->cstate.slot;
-
- if (slot->sl_flags & NFSD4_SLOT_CACHETHIS)
- op->status = nfserr_rep_too_big_to_cache;
- else
- op->status = nfserr_rep_too_big;
- }
if (so) {
so->so_replay.rp_status = op->status;
so->so_replay.rp_buflen = (char *)resp->p - (char *)(statp+1);
return -EBADF;
/*
- * It's not possible to punch hole or perform collapse range
- * on append only file
+ * We can only allow pure fallocate on append only files
*/
- if (mode & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE)
- && IS_APPEND(inode))
+ if ((mode & ~FALLOC_FL_KEEP_SIZE) && IS_APPEND(inode))
return -EPERM;
if (IS_IMMUTABLE(inode))
return -EPERM;
+ /*
+ * We can not allow to do any fallocate operation on an active
+ * swapfile
+ */
+ if (IS_SWAPFILE(inode))
+ ret = -ETXTBSY;
+
/*
* Revalidate the write permissions, in case security policy has
* changed since the files were opened.
if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0))
return -EFBIG;
- /*
- * There is no need to overlap collapse range with EOF, in which case
- * it is effectively a truncate operation
- */
- if ((mode & FALLOC_FL_COLLAPSE_RANGE) &&
- (offset + len >= i_size_read(inode)))
- return -EINVAL;
-
if (!file->f_op->fallocate)
return -EOPNOTSUPP;
goto out_unlock;
}
- ASSERT(offset + len < i_size_read(inode));
+ /*
+ * There is no need to overlap collapse range with EOF,
+ * in which case it is effectively a truncate operation
+ */
+ if (offset + len >= i_size_read(inode)) {
+ error = -EINVAL;
+ goto out_unlock;
+ }
+
new_size = i_size_read(inode) - len;
error = xfs_collapse_file_space(ip, offset, len);
#define set_fixmap_io(idx, phys) \
__set_fixmap(idx, phys, FIXMAP_PAGE_IO)
+#define set_fixmap_offset_io(idx, phys) \
+ __set_fixmap_offset(idx, phys, FIXMAP_PAGE_IO)
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_GENERIC_FIXMAP_H */
}
#ifndef zero_bytemask
-#ifdef CONFIG_64BIT
-#define zero_bytemask(mask) (~0ul << fls64(mask))
-#else
-#define zero_bytemask(mask) (~0ul << fls(mask))
-#endif /* CONFIG_64BIT */
-#endif /* zero_bytemask */
+#define zero_bytemask(mask) (~1ul << __fls(mask))
+#endif
#endif /* _ASM_WORD_AT_A_TIME_H */
--- /dev/null
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SX_H
+#define __DT_BINDINGS_CLOCK_IMX6SX_H
+
+#define IMX6SX_CLK_DUMMY 0
+#define IMX6SX_CLK_CKIL 1
+#define IMX6SX_CLK_CKIH 2
+#define IMX6SX_CLK_OSC 3
+#define IMX6SX_CLK_PLL1_SYS 4
+#define IMX6SX_CLK_PLL2_BUS 5
+#define IMX6SX_CLK_PLL3_USB_OTG 6
+#define IMX6SX_CLK_PLL4_AUDIO 7
+#define IMX6SX_CLK_PLL5_VIDEO 8
+#define IMX6SX_CLK_PLL6_ENET 9
+#define IMX6SX_CLK_PLL7_USB_HOST 10
+#define IMX6SX_CLK_USBPHY1 11
+#define IMX6SX_CLK_USBPHY2 12
+#define IMX6SX_CLK_USBPHY1_GATE 13
+#define IMX6SX_CLK_USBPHY2_GATE 14
+#define IMX6SX_CLK_PCIE_REF 15
+#define IMX6SX_CLK_PCIE_REF_125M 16
+#define IMX6SX_CLK_ENET_REF 17
+#define IMX6SX_CLK_PLL2_PFD0 18
+#define IMX6SX_CLK_PLL2_PFD1 19
+#define IMX6SX_CLK_PLL2_PFD2 20
+#define IMX6SX_CLK_PLL2_PFD3 21
+#define IMX6SX_CLK_PLL3_PFD0 22
+#define IMX6SX_CLK_PLL3_PFD1 23
+#define IMX6SX_CLK_PLL3_PFD2 24
+#define IMX6SX_CLK_PLL3_PFD3 25
+#define IMX6SX_CLK_PLL2_198M 26
+#define IMX6SX_CLK_PLL3_120M 27
+#define IMX6SX_CLK_PLL3_80M 28
+#define IMX6SX_CLK_PLL3_60M 29
+#define IMX6SX_CLK_TWD 30
+#define IMX6SX_CLK_PLL4_POST_DIV 31
+#define IMX6SX_CLK_PLL4_AUDIO_DIV 32
+#define IMX6SX_CLK_PLL5_POST_DIV 33
+#define IMX6SX_CLK_PLL5_VIDEO_DIV 34
+#define IMX6SX_CLK_STEP 35
+#define IMX6SX_CLK_PLL1_SW 36
+#define IMX6SX_CLK_OCRAM_SEL 37
+#define IMX6SX_CLK_PERIPH_PRE 38
+#define IMX6SX_CLK_PERIPH2_PRE 39
+#define IMX6SX_CLK_PERIPH_CLK2_SEL 40
+#define IMX6SX_CLK_PERIPH2_CLK2_SEL 41
+#define IMX6SX_CLK_PCIE_AXI_SEL 42
+#define IMX6SX_CLK_GPU_AXI_SEL 43
+#define IMX6SX_CLK_GPU_CORE_SEL 44
+#define IMX6SX_CLK_EIM_SLOW_SEL 45
+#define IMX6SX_CLK_USDHC1_SEL 46
+#define IMX6SX_CLK_USDHC2_SEL 47
+#define IMX6SX_CLK_USDHC3_SEL 48
+#define IMX6SX_CLK_USDHC4_SEL 49
+#define IMX6SX_CLK_SSI1_SEL 50
+#define IMX6SX_CLK_SSI2_SEL 51
+#define IMX6SX_CLK_SSI3_SEL 52
+#define IMX6SX_CLK_QSPI1_SEL 53
+#define IMX6SX_CLK_PERCLK_SEL 54
+#define IMX6SX_CLK_VID_SEL 55
+#define IMX6SX_CLK_ESAI_SEL 56
+#define IMX6SX_CLK_LDB_DI0_DIV_SEL 57
+#define IMX6SX_CLK_LDB_DI1_DIV_SEL 58
+#define IMX6SX_CLK_CAN_SEL 59
+#define IMX6SX_CLK_UART_SEL 60
+#define IMX6SX_CLK_QSPI2_SEL 61
+#define IMX6SX_CLK_LDB_DI1_SEL 62
+#define IMX6SX_CLK_LDB_DI0_SEL 63
+#define IMX6SX_CLK_SPDIF_SEL 64
+#define IMX6SX_CLK_AUDIO_SEL 65
+#define IMX6SX_CLK_ENET_PRE_SEL 66
+#define IMX6SX_CLK_ENET_SEL 67
+#define IMX6SX_CLK_M4_PRE_SEL 68
+#define IMX6SX_CLK_M4_SEL 69
+#define IMX6SX_CLK_ECSPI_SEL 70
+#define IMX6SX_CLK_LCDIF1_PRE_SEL 71
+#define IMX6SX_CLK_LCDIF2_PRE_SEL 72
+#define IMX6SX_CLK_LCDIF1_SEL 73
+#define IMX6SX_CLK_LCDIF2_SEL 74
+#define IMX6SX_CLK_DISPLAY_SEL 75
+#define IMX6SX_CLK_CSI_SEL 76
+#define IMX6SX_CLK_CKO1_SEL 77
+#define IMX6SX_CLK_CKO2_SEL 78
+#define IMX6SX_CLK_CKO 79
+#define IMX6SX_CLK_PERIPH_CLK2 80
+#define IMX6SX_CLK_PERIPH2_CLK2 81
+#define IMX6SX_CLK_IPG 82
+#define IMX6SX_CLK_GPU_CORE_PODF 83
+#define IMX6SX_CLK_GPU_AXI_PODF 84
+#define IMX6SX_CLK_LCDIF1_PODF 85
+#define IMX6SX_CLK_QSPI1_PODF 86
+#define IMX6SX_CLK_EIM_SLOW_PODF 87
+#define IMX6SX_CLK_LCDIF2_PODF 88
+#define IMX6SX_CLK_PERCLK 89
+#define IMX6SX_CLK_VID_PODF 90
+#define IMX6SX_CLK_CAN_PODF 91
+#define IMX6SX_CLK_USDHC1_PODF 92
+#define IMX6SX_CLK_USDHC2_PODF 93
+#define IMX6SX_CLK_USDHC3_PODF 94
+#define IMX6SX_CLK_USDHC4_PODF 95
+#define IMX6SX_CLK_UART_PODF 96
+#define IMX6SX_CLK_ESAI_PRED 97
+#define IMX6SX_CLK_ESAI_PODF 98
+#define IMX6SX_CLK_SSI3_PRED 99
+#define IMX6SX_CLK_SSI3_PODF 100
+#define IMX6SX_CLK_SSI1_PRED 101
+#define IMX6SX_CLK_SSI1_PODF 102
+#define IMX6SX_CLK_QSPI2_PRED 103
+#define IMX6SX_CLK_QSPI2_PODF 104
+#define IMX6SX_CLK_SSI2_PRED 105
+#define IMX6SX_CLK_SSI2_PODF 106
+#define IMX6SX_CLK_SPDIF_PRED 107
+#define IMX6SX_CLK_SPDIF_PODF 108
+#define IMX6SX_CLK_AUDIO_PRED 109
+#define IMX6SX_CLK_AUDIO_PODF 110
+#define IMX6SX_CLK_ENET_PODF 111
+#define IMX6SX_CLK_M4_PODF 112
+#define IMX6SX_CLK_ECSPI_PODF 113
+#define IMX6SX_CLK_LCDIF1_PRED 114
+#define IMX6SX_CLK_LCDIF2_PRED 115
+#define IMX6SX_CLK_DISPLAY_PODF 116
+#define IMX6SX_CLK_CSI_PODF 117
+#define IMX6SX_CLK_LDB_DI0_DIV_3_5 118
+#define IMX6SX_CLK_LDB_DI0_DIV_7 119
+#define IMX6SX_CLK_LDB_DI1_DIV_3_5 120
+#define IMX6SX_CLK_LDB_DI1_DIV_7 121
+#define IMX6SX_CLK_CKO1_PODF 122
+#define IMX6SX_CLK_CKO2_PODF 123
+#define IMX6SX_CLK_PERIPH 124
+#define IMX6SX_CLK_PERIPH2 125
+#define IMX6SX_CLK_OCRAM 126
+#define IMX6SX_CLK_AHB 127
+#define IMX6SX_CLK_MMDC_PODF 128
+#define IMX6SX_CLK_ARM 129
+#define IMX6SX_CLK_AIPS_TZ1 130
+#define IMX6SX_CLK_AIPS_TZ2 131
+#define IMX6SX_CLK_APBH_DMA 132
+#define IMX6SX_CLK_ASRC_GATE 133
+#define IMX6SX_CLK_CAAM_MEM 134
+#define IMX6SX_CLK_CAAM_ACLK 135
+#define IMX6SX_CLK_CAAM_IPG 136
+#define IMX6SX_CLK_CAN1_IPG 137
+#define IMX6SX_CLK_CAN1_SERIAL 138
+#define IMX6SX_CLK_CAN2_IPG 139
+#define IMX6SX_CLK_CAN2_SERIAL 140
+#define IMX6SX_CLK_CPU_DEBUG 141
+#define IMX6SX_CLK_DCIC1 142
+#define IMX6SX_CLK_DCIC2 143
+#define IMX6SX_CLK_AIPS_TZ3 144
+#define IMX6SX_CLK_ECSPI1 145
+#define IMX6SX_CLK_ECSPI2 146
+#define IMX6SX_CLK_ECSPI3 147
+#define IMX6SX_CLK_ECSPI4 148
+#define IMX6SX_CLK_ECSPI5 149
+#define IMX6SX_CLK_EPIT1 150
+#define IMX6SX_CLK_EPIT2 151
+#define IMX6SX_CLK_ESAI_EXTAL 152
+#define IMX6SX_CLK_WAKEUP 153
+#define IMX6SX_CLK_GPT_BUS 154
+#define IMX6SX_CLK_GPT_SERIAL 155
+#define IMX6SX_CLK_GPU 156
+#define IMX6SX_CLK_OCRAM_S 157
+#define IMX6SX_CLK_CANFD 158
+#define IMX6SX_CLK_CSI 159
+#define IMX6SX_CLK_I2C1 160
+#define IMX6SX_CLK_I2C2 161
+#define IMX6SX_CLK_I2C3 162
+#define IMX6SX_CLK_OCOTP 163
+#define IMX6SX_CLK_IOMUXC 164
+#define IMX6SX_CLK_IPMUX1 165
+#define IMX6SX_CLK_IPMUX2 166
+#define IMX6SX_CLK_IPMUX3 167
+#define IMX6SX_CLK_TZASC1 168
+#define IMX6SX_CLK_LCDIF_APB 169
+#define IMX6SX_CLK_PXP_AXI 170
+#define IMX6SX_CLK_M4 171
+#define IMX6SX_CLK_ENET 172
+#define IMX6SX_CLK_DISPLAY_AXI 173
+#define IMX6SX_CLK_LCDIF2_PIX 174
+#define IMX6SX_CLK_LCDIF1_PIX 175
+#define IMX6SX_CLK_LDB_DI0 176
+#define IMX6SX_CLK_QSPI1 177
+#define IMX6SX_CLK_MLB 178
+#define IMX6SX_CLK_MMDC_P0_FAST 179
+#define IMX6SX_CLK_MMDC_P0_IPG 180
+#define IMX6SX_CLK_AXI 181
+#define IMX6SX_CLK_PCIE_AXI 182
+#define IMX6SX_CLK_QSPI2 183
+#define IMX6SX_CLK_PER1_BCH 184
+#define IMX6SX_CLK_PER2_MAIN 185
+#define IMX6SX_CLK_PWM1 186
+#define IMX6SX_CLK_PWM2 187
+#define IMX6SX_CLK_PWM3 188
+#define IMX6SX_CLK_PWM4 189
+#define IMX6SX_CLK_GPMI_BCH_APB 190
+#define IMX6SX_CLK_GPMI_BCH 191
+#define IMX6SX_CLK_GPMI_IO 192
+#define IMX6SX_CLK_GPMI_APB 193
+#define IMX6SX_CLK_ROM 194
+#define IMX6SX_CLK_SDMA 195
+#define IMX6SX_CLK_SPBA 196
+#define IMX6SX_CLK_SPDIF 197
+#define IMX6SX_CLK_SSI1_IPG 198
+#define IMX6SX_CLK_SSI2_IPG 199
+#define IMX6SX_CLK_SSI3_IPG 200
+#define IMX6SX_CLK_SSI1 201
+#define IMX6SX_CLK_SSI2 202
+#define IMX6SX_CLK_SSI3 203
+#define IMX6SX_CLK_UART_IPG 204
+#define IMX6SX_CLK_UART_SERIAL 205
+#define IMX6SX_CLK_SAI1 206
+#define IMX6SX_CLK_SAI2 207
+#define IMX6SX_CLK_USBOH3 208
+#define IMX6SX_CLK_USDHC1 209
+#define IMX6SX_CLK_USDHC2 210
+#define IMX6SX_CLK_USDHC3 211
+#define IMX6SX_CLK_USDHC4 212
+#define IMX6SX_CLK_EIM_SLOW 213
+#define IMX6SX_CLK_PWM8 214
+#define IMX6SX_CLK_VADC 215
+#define IMX6SX_CLK_GIS 216
+#define IMX6SX_CLK_I2C4 217
+#define IMX6SX_CLK_PWM5 218
+#define IMX6SX_CLK_PWM6 219
+#define IMX6SX_CLK_PWM7 220
+#define IMX6SX_CLK_CKO1 221
+#define IMX6SX_CLK_CKO2 222
+#define IMX6SX_CLK_IPP_DI0 223
+#define IMX6SX_CLK_IPP_DI1 224
+#define IMX6SX_CLK_ENET_AHB 225
+#define IMX6SX_CLK_OCRAM_PODF 226
+#define IMX6SX_CLK_GPT_3M 227
+#define IMX6SX_CLK_ENET_PTP 228
+#define IMX6SX_CLK_ENET_PTP_REF 229
+#define IMX6SX_CLK_ENET2_REF 230
+#define IMX6SX_CLK_ENET2_REF_125M 231
+#define IMX6SX_CLK_AUDIO 232
+#define IMX6SX_CLK_LVDS1_SEL 233
+#define IMX6SX_CLK_LVDS1_OUT 234
+#define IMX6SX_CLK_ASRC_IPG 235
+#define IMX6SX_CLK_ASRC_MEM 236
+#define IMX6SX_CLK_SAI1_IPG 237
+#define IMX6SX_CLK_SAI2_IPG 238
+#define IMX6SX_CLK_ESAI_IPG 239
+#define IMX6SX_CLK_ESAI_MEM 240
+#define IMX6SX_CLK_CLK_END 241
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
#define R8A7790_CLK_TMU0 25
#define R8A7790_CLK_VSP1_DU1 27
#define R8A7790_CLK_VSP1_DU0 28
-#define R8A7790_CLK_VSP1_RT 30
-#define R8A7790_CLK_VSP1_SY 31
+#define R8A7790_CLK_VSP1_R 30
+#define R8A7790_CLK_VSP1_S 31
/* MSTP2 */
#define R8A7790_CLK_SCIFA2 2
#define R8A7791_CLK_TMU0 25
#define R8A7791_CLK_VSP1_DU1 27
#define R8A7791_CLK_VSP1_DU0 28
-#define R8A7791_CLK_VSP1_SY 31
+#define R8A7791_CLK_VSP1_S 31
/* MSTP2 */
#define R8A7791_CLK_SCIFA2 2
#define R8A7791_CLK_SCIFB1 7
#define R8A7791_CLK_MSIOF1 8
#define R8A7791_CLK_SCIFB2 16
-#define R8A7791_CLK_DMAC 18
+#define R8A7791_CLK_SYS_DMAC1 18
+#define R8A7791_CLK_SYS_DMAC0 19
/* MSTP3 */
#define R8A7791_CLK_TPU0 4
/* 10 (register bit affects spdif_in and spdif_out) */
#define TEGRA124_CLK_I2S1 11
#define TEGRA124_CLK_I2C1 12
-#define TEGRA124_CLK_NDFLASH 13
+/* 13 */
#define TEGRA124_CLK_SDMMC1 14
#define TEGRA124_CLK_SDMMC4 15
/* 16 */
/* 64 */
#define TEGRA124_CLK_UARTD 65
-#define TEGRA124_CLK_UARTE 66
+/* 66 */
#define TEGRA124_CLK_I2C3 67
#define TEGRA124_CLK_SBC4 68
#define TEGRA124_CLK_SDMMC3 69
#define TEGRA124_CLK_TRACE 77
#define TEGRA124_CLK_SOC_THERM 78
#define TEGRA124_CLK_DTV 79
-#define TEGRA124_CLK_NDSPEED 80
+/* 80 */
#define TEGRA124_CLK_I2CSLOW 81
#define TEGRA124_CLK_DSIB 82
#define TEGRA124_CLK_TSEC 83
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */
+#define AT91_PMC_OSCSEL (1 << 7) /* Slow Oscillator Selection [some SAM9] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define FL_SLEEP 128 /* A blocking lock */
#define FL_DOWNGRADE_PENDING 256 /* Lease is being downgraded */
#define FL_UNLOCK_PENDING 512 /* Lease is being broken */
-#define FL_FILE_PVT 1024 /* lock is private to the file */
+#define FL_OFDLCK 1024 /* lock is "owned" by struct file */
/*
* Special return value from posix_lock_file() and vfs_lock_file() for
extern int ftrace_arch_read_dyn_info(char *buf, int size);
extern int skip_trace(unsigned long ip);
+extern void ftrace_module_init(struct module *mod);
extern void ftrace_disable_daemon(void);
extern void ftrace_enable_daemon(void);
static inline void ftrace_disable_daemon(void) { }
static inline void ftrace_enable_daemon(void) { }
static inline void ftrace_release_mod(struct module *mod) {}
+static inline void ftrace_module_init(struct module *mod) {}
static inline __init int register_ftrace_command(struct ftrace_func_command *cmd)
{
return -EINVAL;
extern cpumask_var_t irq_default_affinity;
-extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+/* Internal implementation. Use the helpers below */
+extern int __irq_set_affinity(unsigned int irq, const struct cpumask *cpumask,
+ bool force);
+
+/**
+ * irq_set_affinity - Set the irq affinity of a given irq
+ * @irq: Interrupt to set affinity
+ * @cpumask: cpumask
+ *
+ * Fails if cpumask does not contain an online CPU
+ */
+static inline int
+irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+{
+ return __irq_set_affinity(irq, cpumask, false);
+}
+
+/**
+ * irq_force_affinity - Force the irq affinity of a given irq
+ * @irq: Interrupt to set affinity
+ * @cpumask: cpumask
+ *
+ * Same as irq_set_affinity, but without checking the mask against
+ * online cpus.
+ *
+ * Solely for low level cpu hotplug code, where we need to make per
+ * cpu interrupts affine before the cpu becomes online.
+ */
+static inline int
+irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
+{
+ return __irq_set_affinity(irq, cpumask, true);
+}
+
extern int irq_can_set_affinity(unsigned int irq);
extern int irq_select_affinity(unsigned int irq);
extern void irq_cpu_online(void);
extern void irq_cpu_offline(void);
-extern int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *cpumask);
+extern int irq_set_affinity_locked(struct irq_data *data,
+ const struct cpumask *cpumask, bool force);
#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
void irq_move_irq(struct irq_data *data);
return d ? irqd_get_trigger_type(d) : 0;
}
+unsigned int arch_dynirq_lower_bound(unsigned int from);
+
int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node,
struct module *owner);
unsigned long qc_allocated;
unsigned int qc_active;
int nr_active_links; /* #links with active qcs */
+ unsigned int last_tag; /* track next tag hw expects */
struct ata_link link; /* host default link */
struct ata_link *slave_link; /* see ata_slave_link_init() */
int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base,
size_t mbus_size, phys_addr_t sdram_phys_base,
size_t sdram_size);
-int mvebu_mbus_dt_init(void);
+int mvebu_mbus_dt_init(bool is_coherent);
#endif /* __LINUX_MBUS_H */
#ifdef CONFIG_OF_IRQ
extern int of_irq_count(struct device_node *dev);
+extern int of_irq_get(struct device_node *dev, int index);
#else
static inline int of_irq_count(struct device_node *dev)
{
return 0;
}
+static inline int of_irq_get(struct device_node *dev, int index)
+{
+ return 0;
+}
#endif
#if defined(CONFIG_OF)
#else
static inline int phy_pm_runtime_get(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_pm_runtime_get_sync(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_pm_runtime_put(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_pm_runtime_put_sync(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_init(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_exit(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_power_on(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
static inline int phy_power_off(struct phy *phy)
{
+ if (!phy)
+ return 0;
return -ENOSYS;
}
#ifndef _AT91_ADC_H_
#define _AT91_ADC_H_
-/**
- * struct at91_adc_reg_desc - Various informations relative to registers
- * @channel_base: Base offset for the channel data registers
- * @drdy_mask: Mask of the DRDY field in the relevant registers
- (Interruptions registers mostly)
- * @status_register: Offset of the Interrupt Status Register
- * @trigger_register: Offset of the Trigger setup register
- * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register
- * @mr_startup_mask: Mask of the STARTUP field in the adc MR register
- */
-struct at91_adc_reg_desc {
- u8 channel_base;
- u32 drdy_mask;
- u8 status_register;
- u8 trigger_register;
- u32 mr_prescal_mask;
- u32 mr_startup_mask;
+enum atmel_adc_ts_type {
+ ATMEL_ADC_TOUCHSCREEN_NONE = 0,
+ ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
+ ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
};
/**
/**
* struct at91_adc_data - platform data for ADC driver
* @channels_used: channels in use on the board as a bitmask
- * @num_channels: global number of channels available on the board
- * @registers: Registers definition on the board
* @startup_time: startup time of the ADC in microseconds
* @trigger_list: Triggers available in the ADC
* @trigger_number: Number of triggers available in the ADC
* @use_external_triggers: does the board has external triggers availables
* @vref: Reference voltage for the ADC in millivolts
+ * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires)
*/
struct at91_adc_data {
unsigned long channels_used;
- u8 num_channels;
- struct at91_adc_reg_desc *registers;
u8 startup_time;
struct at91_adc_trigger *trigger_list;
u8 trigger_number;
bool use_external_triggers;
u16 vref;
+ enum atmel_adc_ts_type touchscreen_type;
};
extern void __init at91_add_device_adc(struct at91_adc_data *data);
int rts_gpio; /* optional RTS GPIO */
};
- /* Touchscreen Controller */
-struct at91_tsadcc_data {
- unsigned int adc_clock;
- u8 pendet_debounce;
- u8 ts_sample_hold_time;
-};
-
/* CAN */
struct at91_can_data {
void (*transceiver_switch)(int on);
static inline struct regulator *__must_check
regulator_get_optional(struct device *dev, const char *id)
{
- return NULL;
+ return ERR_PTR(-ENODEV);
}
static inline struct regulator *__must_check
devm_regulator_get_optional(struct device *dev, const char *id)
{
- return NULL;
+ return ERR_PTR(-ENODEV);
}
static inline void regulator_put(struct regulator *regulator)
char name[32];
char phys[32];
+ char firmware_id[128];
bool manual_bind;
struct tty_buffer *head; /* Queue head */
struct work_struct work;
struct mutex lock;
+ spinlock_t flush_lock;
atomic_t priority;
struct tty_buffer sentinel;
struct llist_head free; /* Free queue head */
struct ext4_map_blocks;
struct extent_status;
-/* shim until we merge in the xfs_collapse_range branch */
-#ifndef FALLOC_FL_COLLAPSE_RANGE
-#define FALLOC_FL_COLLAPSE_RANGE 0x08
-#endif
-
-#ifndef FALLOC_FL_ZERO_RANGE
-#define FALLOC_FL_ZERO_RANGE 0x10
-#endif
-
#define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
#define show_mballoc_flags(flags) __print_flags(flags, "|", \
{ (1UL << TAINT_OOT_MODULE), "O" }, \
{ (1UL << TAINT_FORCED_MODULE), "F" }, \
{ (1UL << TAINT_CRAP), "C" }, \
- { (1UL << TAINT_UNSIGNED_MODULE), "X" })
+ { (1UL << TAINT_UNSIGNED_MODULE), "E" })
TRACE_EVENT(module_load,
#endif
/*
- * fd "private" POSIX locks.
+ * Open File Description Locks
*
- * Usually POSIX locks held by a process are released on *any* close and are
+ * Usually record locks held by a process are released on *any* close and are
* not inherited across a fork().
*
- * These cmd values will set locks that conflict with normal POSIX locks, but
- * are "owned" by the opened file, not the process. This means that they are
- * inherited across fork() like BSD (flock) locks, and they are only released
- * automatically when the last reference to the the open file against which
- * they were acquired is put.
+ * These cmd values will set locks that conflict with process-associated
+ * record locks, but are "owned" by the open file description, not the
+ * process. This means that they are inherited across fork() like BSD (flock)
+ * locks, and they are only released automatically when the last reference to
+ * the the open file against which they were acquired is put.
*/
-#define F_GETLKP 36
-#define F_SETLKP 37
-#define F_SETLKPW 38
+#define F_OFD_GETLK 36
+#define F_OFD_SETLK 37
+#define F_OFD_SETLKW 38
#define F_OWNER_TID 0
#define F_OWNER_PID 1
#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
+#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
#define INPUT_PROP_MAX 0x1f
#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
goto again;
}
timer->base = new_base;
+ } else {
+ if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
+ cpu = this_cpu;
+ goto again;
+ }
}
return new_base;
}
cpu_base->expires_next.tv64 = expires_next.tv64;
+ /*
+ * If a hang was detected in the last timer interrupt then we
+ * leave the hang delay active in the hardware. We want the
+ * system to make progress. That also prevents the following
+ * scenario:
+ * T1 expires 50ms from now
+ * T2 expires 5s from now
+ *
+ * T1 is removed, so this code is called and would reprogram
+ * the hardware to 5s from now. Any hrtimer_start after that
+ * will not reprogram the hardware due to hang_detected being
+ * set. So we'd effectivly block all timers until the T2 event
+ * fires.
+ */
+ if (cpu_base->hang_detected)
+ return;
+
if (cpu_base->expires_next.tv64 != KTIME_MAX)
tick_program_event(cpu_base->expires_next, 1);
}
if (from > irq)
return -EINVAL;
from = irq;
+ } else {
+ /*
+ * For interrupts which are freely allocated the
+ * architecture can force a lower bound to the @from
+ * argument. x86 uses this to exclude the GSI space.
+ */
+ from = arch_dynirq_lower_bound(from);
}
mutex_lock(&sparse_irq_lock);
struct irq_chip *chip = irq_data_get_irq_chip(data);
int ret;
- ret = chip->irq_set_affinity(data, mask, false);
+ ret = chip->irq_set_affinity(data, mask, force);
switch (ret) {
case IRQ_SET_MASK_OK:
cpumask_copy(data->affinity, mask);
return ret;
}
-int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask)
+int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
+ bool force)
{
struct irq_chip *chip = irq_data_get_irq_chip(data);
struct irq_desc *desc = irq_data_to_desc(data);
return -EINVAL;
if (irq_can_move_pcntxt(data)) {
- ret = irq_do_set_affinity(data, mask, false);
+ ret = irq_do_set_affinity(data, mask, force);
} else {
irqd_set_move_pending(data);
irq_copy_pending(desc, mask);
return ret;
}
-/**
- * irq_set_affinity - Set the irq affinity of a given irq
- * @irq: Interrupt to set affinity
- * @mask: cpumask
- *
- */
-int irq_set_affinity(unsigned int irq, const struct cpumask *mask)
+int __irq_set_affinity(unsigned int irq, const struct cpumask *mask, bool force)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
return -EINVAL;
raw_spin_lock_irqsave(&desc->lock, flags);
- ret = __irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask);
+ ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
raw_spin_unlock_irqrestore(&desc->lock, flags);
return ret;
}
return -EFAULT;
name[MODULE_NAME_LEN-1] = '\0';
- if (!(flags & O_NONBLOCK))
- pr_warn("waiting module removal not supported: please upgrade\n");
-
if (mutex_lock_interruptible(&module_mutex) != 0)
return -EINTR;
dynamic_debug_setup(info->debug, info->num_debug);
+ /* Ftrace init must be called in the MODULE_STATE_UNFORMED state */
+ ftrace_module_init(mod);
+
/* Finally it's fully formed, ready to start executing. */
err = complete_formation(mod, info);
if (err)
#include <linux/init.h>
#include <linux/console.h>
#include <linux/cpu.h>
+#include <linux/cpuidle.h>
#include <linux/syscalls.h>
#include <linux/gfp.h>
#include <linux/io.h>
static void freeze_enter(void)
{
+ cpuidle_resume();
wait_event(suspend_freeze_wait_head, suspend_freeze_wake);
+ cpuidle_pause();
}
void freeze_wake(void)
{
return 0;
}
+
+unsigned int __weak arch_dynirq_lower_bound(unsigned int from)
+{
+ return from;
+}
bit = find_last_bit(&mask, BITS_PER_LONG);
- mask = (1 << bit) - 1;
+ mask = (1UL << bit) - 1;
expires_limit = expires_limit & ~(mask);
ftrace_process_locs(mod, start, end);
}
-static int ftrace_module_notify_enter(struct notifier_block *self,
- unsigned long val, void *data)
+void ftrace_module_init(struct module *mod)
{
- struct module *mod = data;
-
- if (val == MODULE_STATE_COMING)
- ftrace_init_module(mod, mod->ftrace_callsites,
- mod->ftrace_callsites +
- mod->num_ftrace_callsites);
- return 0;
+ ftrace_init_module(mod, mod->ftrace_callsites,
+ mod->ftrace_callsites +
+ mod->num_ftrace_callsites);
}
static int ftrace_module_notify_exit(struct notifier_block *self,
return 0;
}
#else
-static int ftrace_module_notify_enter(struct notifier_block *self,
- unsigned long val, void *data)
-{
- return 0;
-}
static int ftrace_module_notify_exit(struct notifier_block *self,
unsigned long val, void *data)
{
}
#endif /* CONFIG_MODULES */
-struct notifier_block ftrace_module_enter_nb = {
- .notifier_call = ftrace_module_notify_enter,
- .priority = INT_MAX, /* Run before anything that can use kprobes */
-};
-
struct notifier_block ftrace_module_exit_nb = {
.notifier_call = ftrace_module_notify_exit,
.priority = INT_MIN, /* Run after anything that can remove kprobes */
__start_mcount_loc,
__stop_mcount_loc);
- ret = register_module_notifier(&ftrace_module_enter_nb);
- if (ret)
- pr_warning("Failed to register trace ftrace module enter notifier\n");
-
ret = register_module_notifier(&ftrace_module_exit_nb);
if (ret)
pr_warning("Failed to register trace ftrace module exit notifier\n");
data->ops->func(data);
continue;
}
- filter = rcu_dereference(data->filter);
+ filter = rcu_dereference_sched(data->filter);
if (filter && !filter_match_preds(filter, rec))
continue;
if (data->cmd_ops->post_trigger) {
#endif
}
-void tlb_flush_mmu(struct mmu_gather *tlb)
+static void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
- struct mmu_gather_batch *batch;
-
- if (!tlb->need_flush)
- return;
tlb->need_flush = 0;
tlb_flush(tlb);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb_table_flush(tlb);
#endif
+}
+
+static void tlb_flush_mmu_free(struct mmu_gather *tlb)
+{
+ struct mmu_gather_batch *batch;
for (batch = &tlb->local; batch; batch = batch->next) {
free_pages_and_swap_cache(batch->pages, batch->nr);
tlb->active = &tlb->local;
}
+void tlb_flush_mmu(struct mmu_gather *tlb)
+{
+ if (!tlb->need_flush)
+ return;
+ tlb_flush_mmu_tlbonly(tlb);
+ tlb_flush_mmu_free(tlb);
+}
+
/* tlb_finish_mmu
* Called at the end of the shootdown operation to free up any resources
* that were required.
if (PageAnon(page))
rss[MM_ANONPAGES]--;
else {
- if (pte_dirty(ptent))
+ if (pte_dirty(ptent)) {
+ force_flush = 1;
set_page_dirty(page);
+ }
if (pte_young(ptent) &&
likely(!(vma->vm_flags & VM_SEQ_READ)))
mark_page_accessed(page);
page_remove_rmap(page);
if (unlikely(page_mapcount(page) < 0))
print_bad_pte(vma, addr, ptent, page);
- force_flush = !__tlb_remove_page(tlb, page);
- if (force_flush)
+ if (unlikely(!__tlb_remove_page(tlb, page))) {
+ force_flush = 1;
break;
+ }
continue;
}
/*
add_mm_rss_vec(mm, rss);
arch_leave_lazy_mmu_mode();
- pte_unmap_unlock(start_pte, ptl);
- /*
- * mmu_gather ran out of room to batch pages, we break out of
- * the PTE lock to avoid doing the potential expensive TLB invalidate
- * and page-free while holding it.
- */
+ /* Do the actual TLB flush before dropping ptl */
if (force_flush) {
unsigned long old_end;
- force_flush = 0;
-
/*
* Flush the TLB just for the previous segment,
* then update the range to be the remaining
*/
old_end = tlb->end;
tlb->end = addr;
-
- tlb_flush_mmu(tlb);
-
+ tlb_flush_mmu_tlbonly(tlb);
tlb->start = addr;
tlb->end = old_end;
+ }
+ pte_unmap_unlock(start_pte, ptl);
+
+ /*
+ * If we forced a TLB flush (either due to running out of
+ * batch buffers or because we needed to flush dirty TLB
+ * entries before releasing the ptl), free the batched
+ * memory too. Restart if we didn't do everything.
+ */
+ if (force_flush) {
+ force_flush = 0;
+ tlb_flush_mmu_free(tlb);
if (addr != end)
goto again;
unsigned long address, unsigned int fault_flags)
{
struct vm_area_struct *vma;
+ vm_flags_t vm_flags;
int ret;
vma = find_extend_vma(mm, address);
if (!vma || address < vma->vm_start)
return -EFAULT;
+ vm_flags = (fault_flags & FAULT_FLAG_WRITE) ? VM_WRITE : VM_READ;
+ if (!(vm_flags & vma->vm_flags))
+ return -EFAULT;
+
ret = handle_mm_fault(mm, vma, address, fault_flags);
if (ret & VM_FAULT_ERROR) {
if (ret & VM_FAULT_OOM)
for (i = 0; i < VMACACHE_SIZE; i++) {
struct vm_area_struct *vma = current->vmacache[i];
- if (vma && vma->vm_start <= addr && vma->vm_end > addr) {
- BUG_ON(vma->vm_mm != mm);
+ if (!vma)
+ continue;
+ if (WARN_ON_ONCE(vma->vm_mm != mm))
+ break;
+ if (vma->vm_start <= addr && vma->vm_end > addr)
return vma;
- }
}
return NULL;
case F_GETLK:
case F_SETLK:
case F_SETLKW:
- case F_GETLKP:
- case F_SETLKP:
- case F_SETLKPW:
+ case F_OFD_GETLK:
+ case F_OFD_SETLK:
+ case F_OFD_SETLKW:
#if BITS_PER_LONG == 32
case F_GETLK64:
case F_SETLK64:
/* reset the corb hw read pointer */
azx_writew(chip, CORBRP, ICH6_CORBRP_RST);
- for (timeout = 1000; timeout > 0; timeout--) {
- if ((azx_readw(chip, CORBRP) & ICH6_CORBRP_RST) == ICH6_CORBRP_RST)
- break;
- udelay(1);
- }
- if (timeout <= 0)
- dev_err(chip->card->dev, "CORB reset timeout#1, CORBRP = %d\n",
- azx_readw(chip, CORBRP));
+ if (!(chip->driver_caps & AZX_DCAPS_CORBRP_SELF_CLEAR)) {
+ for (timeout = 1000; timeout > 0; timeout--) {
+ if ((azx_readw(chip, CORBRP) & ICH6_CORBRP_RST) == ICH6_CORBRP_RST)
+ break;
+ udelay(1);
+ }
+ if (timeout <= 0)
+ dev_err(chip->card->dev, "CORB reset timeout#1, CORBRP = %d\n",
+ azx_readw(chip, CORBRP));
- azx_writew(chip, CORBRP, 0);
- for (timeout = 1000; timeout > 0; timeout--) {
- if (azx_readw(chip, CORBRP) == 0)
- break;
- udelay(1);
+ azx_writew(chip, CORBRP, 0);
+ for (timeout = 1000; timeout > 0; timeout--) {
+ if (azx_readw(chip, CORBRP) == 0)
+ break;
+ udelay(1);
+ }
+ if (timeout <= 0)
+ dev_err(chip->card->dev, "CORB reset timeout#2, CORBRP = %d\n",
+ azx_readw(chip, CORBRP));
}
- if (timeout <= 0)
- dev_err(chip->card->dev, "CORB reset timeout#2, CORBRP = %d\n",
- azx_readw(chip, CORBRP));
/* enable corb dma */
azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN);
/* quirks for Nvidia */
#define AZX_DCAPS_PRESET_NVIDIA \
(AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI |\
- AZX_DCAPS_ALIGN_BUFSIZE | AZX_DCAPS_NO_64BIT)
+ AZX_DCAPS_ALIGN_BUFSIZE | AZX_DCAPS_NO_64BIT |\
+ AZX_DCAPS_CORBRP_SELF_CLEAR)
#define AZX_DCAPS_PRESET_CTHDA \
(AZX_DCAPS_NO_MSI | AZX_DCAPS_POSFIX_LPIB | AZX_DCAPS_4K_BDLE_BOUNDARY)
#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */
#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 powerwell support */
+#define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28) /* CORBRP clears itself after reset */
/* position fix mode */
enum {
SND_PCI_QUIRK(0x1028, 0x0667, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0668, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0669, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x0674, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x067f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include "../codecs/wm8731.h"
#include "atmel-pcm.h"
dev_err(&client->dev, "failed to read vendor ID1: %d\n", ret);
return ret;
}
- vid1 = ((vid1 & 0xff) << 8) | (vid1 >> 8);
ret = regmap_read(alc5623->regmap, ALC5623_VENDOR_ID2, &vid2);
if (ret < 0) {
dev_err(&client->dev, "failed to read vendor ID2: %d\n", ret);
return ret;
}
+ vid2 >>= 8;
if ((vid1 != 0x10ec) || (vid2 != id->driver_data)) {
dev_err(&client->dev, "unknown or wrong codec\n");
}
if (cs42l52->pdata.reset_gpio) {
- ret = gpio_request_one(cs42l52->pdata.reset_gpio,
- GPIOF_OUT_INIT_HIGH, "CS42L52 /RST");
+ ret = devm_gpio_request_one(&i2c_client->dev,
+ cs42l52->pdata.reset_gpio,
+ GPIOF_OUT_INIT_HIGH,
+ "CS42L52 /RST");
if (ret < 0) {
dev_err(&i2c_client->dev, "Failed to request /RST %d: %d\n",
cs42l52->pdata.reset_gpio, ret);
i2c_set_clientdata(i2c_client, cs42l73);
if (cs42l73->pdata.reset_gpio) {
- ret = gpio_request_one(cs42l73->pdata.reset_gpio,
- GPIOF_OUT_INIT_HIGH, "CS42L73 /RST");
+ ret = devm_gpio_request_one(&i2c_client->dev,
+ cs42l73->pdata.reset_gpio,
+ GPIOF_OUT_INIT_HIGH,
+ "CS42L73 /RST");
if (ret < 0) {
dev_err(&i2c_client->dev, "Failed to request /RST %d: %d\n",
cs42l73->pdata.reset_gpio, ret);
}
aic3x_add_widgets(codec);
- list_add(&aic3x->list, &reset_list);
return 0;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_aic3x, &aic3x_dai, 1);
- return ret;
+
+ if (ret != 0)
+ goto err_gpio;
+
+ list_add(&aic3x->list, &reset_list);
+
+ return 0;
err_gpio:
if (gpio_is_valid(aic3x->gpio_reset) &&
/* SPDIF Clock register */
#define STC_SYSCLK_DIV_OFFSET 11
-#define STC_SYSCLK_DIV_MASK (0x1ff << STC_TXCLK_SRC_OFFSET)
-#define STC_SYSCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK)
+#define STC_SYSCLK_DIV_MASK (0x1ff << STC_SYSCLK_DIV_OFFSET)
+#define STC_SYSCLK_DIV(x) ((((x) - 1) << STC_SYSCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK)
#define STC_TXCLK_SRC_OFFSET 8
#define STC_TXCLK_SRC_MASK (0x7 << STC_TXCLK_SRC_OFFSET)
#define STC_TXCLK_SRC_SET(x) ((x << STC_TXCLK_SRC_OFFSET) & STC_TXCLK_SRC_MASK)
enum sst_data_type data_type; /* type of module data */
u32 size; /* size in bytes */
- u32 offset; /* offset in FW file */
+ int32_t offset; /* offset in FW file */
u32 data_offset; /* offset in ADSP memory space */
void *data; /* module data */
};
case IPC_POSITION_CHANGED:
trace_ipc_notification("DSP stream position changed for",
stream->reply.stream_hw_id);
- sst_dsp_inbox_read(hsw->dsp, pos, sizeof(pos));
+ sst_dsp_inbox_read(hsw->dsp, pos, sizeof(*pos));
if (stream->notify_position)
stream->notify_position(stream, stream->pdata);
return -EINVAL;
sst_dsp_read(hsw->dsp, volume,
- stream->reply.volume_register_address[channel], sizeof(volume));
+ stream->reply.volume_register_address[channel],
+ sizeof(*volume));
return 0;
}
trace_ipc_request("PM enter Dx state", state);
ret = ipc_tx_message_wait(hsw, header, &state_, sizeof(state_),
- dx, sizeof(dx));
+ dx, sizeof(*dx));
if (ret < 0) {
dev_err(hsw->dev, "ipc: error set dx state %d failed\n", state);
return ret;
#
# Jz4740 Platform Support
#
-snd-soc-jz4740-objs := jz4740-pcm.o
snd-soc-jz4740-i2s-objs := jz4740-i2s.o
-obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o
obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o
# Jz4740 Machine Support
{
struct rsnd_src *src = rsnd_mod_to_src(mod);
- clk_enable(src->clk);
+ clk_prepare_enable(src->clk);
return 0;
}
{
struct rsnd_src *src = rsnd_mod_to_src(mod);
- clk_disable(src->clk);
+ clk_disable_unprepare(src->clk);
return 0;
}
u32 cr;
if (0 == ssi->usrcnt) {
- clk_enable(ssi->clk);
+ clk_prepare_enable(ssi->clk);
if (rsnd_dai_is_clk_master(rdai)) {
if (rsnd_ssi_clk_from_parent(ssi))
rsnd_ssi_master_clk_stop(ssi);
}
- clk_disable(ssi->clk);
+ clk_disable_unprepare(ssi->clk);
}
dev_dbg(dev, "ssi%d hw stopped\n", rsnd_mod_id(&ssi->mod));
static void dapm_kcontrol_free(struct snd_kcontrol *kctl)
{
struct dapm_kcontrol_data *data = snd_kcontrol_chip(kctl);
- kfree(data->widget);
kfree(data->wlist);
kfree(data);
}
char debugfs_mountpoint[PATH_MAX + 1] = "/sys/kernel/debug";
static const char * const debugfs_known_mountpoints[] = {
- "/sys/kernel/debug/",
- "/debug/",
+ "/sys/kernel/debug",
+ "/debug",
0,
};
format, len_arg, arg);
trace_seq_terminate(&p);
trace_seq_puts(s, p.buffer);
+ trace_seq_destroy(&p);
arg = arg->next;
break;
default:
struct event_filter *pevent_filter_alloc(struct pevent *pevent);
/* for backward compatibility */
-#define FILTER_NONE PEVENT_ERRNO__FILTER_NOT_FOUND
-#define FILTER_NOEXIST PEVENT_ERRNO__NO_FILTER
+#define FILTER_NONE PEVENT_ERRNO__NO_FILTER
+#define FILTER_NOEXIST PEVENT_ERRNO__FILTER_NOT_FOUND
#define FILTER_MISS PEVENT_ERRNO__FILTER_MISS
#define FILTER_MATCH PEVENT_ERRNO__FILTER_MATCH
$(QUIET_CC)$(CC) -o $@ -c -fPIC $(CFLAGS) $(GTK_CFLAGS) $<
$(OUTPUT)libperf-gtk.so: $(GTK_OBJS) $(PERFLIBS)
- $(QUIET_LINK)$(CC) -o $@ -shared $(ALL_LDFLAGS) $(filter %.o,$^) $(GTK_LIBS)
+ $(QUIET_LINK)$(CC) -o $@ -shared $(LDFLAGS) $(filter %.o,$^) $(GTK_LIBS)
$(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(CFLAGS) \
sp = (unsigned long) regs[PERF_REG_X86_SP];
- map = map_groups__find(&thread->mg, MAP__FUNCTION, (u64) sp);
+ map = map_groups__find(&thread->mg, MAP__VARIABLE, (u64) sp);
if (!map) {
pr_debug("failed to get stack map\n");
+ free(buf);
return -1;
}
-
#include <linux/linkage.h>
#define AX 0
ret
ENDPROC(perf_regs_load)
#endif
+
+/*
+ * We need to provide note.GNU-stack section, saying that we want
+ * NOT executable stack. Otherwise the final linking will assume that
+ * the ELF stack should not be restricted at all and set it RWX.
+ */
+.section .note.GNU-stack,"",@progbits
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif
+# So far there's only x86 libdw unwind support merged in perf.
+# Disable it on all other architectures in case libdw unwind
+# support is detected in system. Add supported architectures
+# to the check.
+ifneq ($(ARCH),x86)
+ NO_LIBDW_DWARF_UNWIND := 1
+endif
+
ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
else
CFLAGS += -Wextra
CFLAGS += -std=gnu99
+# Enforce a non-executable stack, as we may regress (again) in the future by
+# adding assembler files missing the .GNU-stack linker note.
+LDFLAGS += -Wl,-z,noexecstack
+
EXTLIBS = -lelf -lpthread -lrt -lm -ldl
ifneq ($(OUTPUT),)
stackprotector-all \
timerfd \
libunwind-debug-frame \
- bionic
+ bionic \
+ liberty \
+ liberty-z \
+ cplus-demangle
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all CORE_FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
endif
ifeq ($(feature-libbfd), 1)
- EXTLIBS += -lbfd -lz -liberty
+ EXTLIBS += -lbfd
+
+ # call all detections now so we get correct
+ # status in VF output
+ $(call feature_check,liberty)
+ $(call feature_check,liberty-z)
+ $(call feature_check,cplus-demangle)
+
+ ifeq ($(feature-liberty), 1)
+ EXTLIBS += -liberty
+ else
+ ifeq ($(feature-liberty-z), 1)
+ EXTLIBS += -liberty -lz
+ endif
+ endif
endif
ifdef NO_DEMANGLE
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
else
ifneq ($(feature-libbfd), 1)
- $(call feature_check,liberty)
- ifeq ($(feature-liberty), 1)
- EXTLIBS += -lbfd -liberty
- else
- $(call feature_check,liberty-z)
- ifeq ($(feature-liberty-z), 1)
- EXTLIBS += -lbfd -liberty -lz
- else
- $(call feature_check,cplus-demangle)
+ ifneq ($(feature-liberty), 1)
+ ifneq ($(feature-liberty-z), 1)
+ # we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT
+ # or any of 'bfd iberty z' trinity
ifeq ($(feature-cplus-demangle), 1)
EXTLIBS += -liberty
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
make_install_html := install-html
make_install_info := install-info
make_install_pdf := install-pdf
+make_static := LDFLAGS=-static
# all the NO_* variable combined
make_minimal := NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1
# run += make_install_info
# run += make_install_pdf
run += make_minimal
+run += make_static
ifneq ($(call has,ctags),)
run += make_tags
}
static int map_groups__set_modules_path_dir(struct map_groups *mg,
- const char *dir_name)
+ const char *dir_name, int depth)
{
struct dirent *dent;
DIR *dir = opendir(dir_name);
!strcmp(dent->d_name, ".."))
continue;
- ret = map_groups__set_modules_path_dir(mg, path);
+ /* Do not follow top-level source and build symlinks */
+ if (depth == 0) {
+ if (!strcmp(dent->d_name, "source") ||
+ !strcmp(dent->d_name, "build"))
+ continue;
+ }
+
+ ret = map_groups__set_modules_path_dir(mg, path,
+ depth + 1);
if (ret < 0)
goto out;
} else {
if (!version)
return -1;
- snprintf(modules_path, sizeof(modules_path), "%s/lib/modules/%s/kernel",
+ snprintf(modules_path, sizeof(modules_path), "%s/lib/modules/%s",
machine->root_dir, version);
free(version);
- return map_groups__set_modules_path_dir(&machine->kmaps, modules_path);
+ return map_groups__set_modules_path_dir(&machine->kmaps, modules_path, 0);
}
static int machine__create_module(void *arg, const char *name, u64 start)
STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment
endif
-# if DEBUG is enabled, then we do not strip or optimize
-ifeq ($(strip $(DEBUG)),true)
- CFLAGS += -O1 -g -DDEBUG
- STRIPCMD = /bin/true -Since_we_are_debugging
-else
- CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer
- STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment
-endif
-
# --- ACPIDUMP BEGIN ---
vpath %.c \
-rm -f $(OUTPUT)acpidump
install-tools:
- $(INSTALL) -d $(DESTDIR)${bindir}
+ $(INSTALL) -d $(DESTDIR)${sbindir}
$(INSTALL_PROGRAM) $(OUTPUT)acpidump $(DESTDIR)${sbindir}
install-man:
u32 val;
u32 *reg;
- offset >>= 1;
reg = vgic_bitmap_get_reg(&vcpu->kvm->arch.vgic.irq_cfg,
- vcpu->vcpu_id, offset);
+ vcpu->vcpu_id, offset >> 1);
- if (offset & 2)
+ if (offset & 4)
val = *reg >> 16;
else
val = *reg & 0xffff;
vgic_reg_access(mmio, &val, offset,
ACCESS_READ_VALUE | ACCESS_WRITE_VALUE);
if (mmio->is_write) {
- if (offset < 4) {
+ if (offset < 8) {
*reg = ~0U; /* Force PPIs/SGIs to 1 */
return false;
}
val = vgic_cfg_compress(val);
- if (offset & 2) {
+ if (offset & 4) {
*reg &= 0xffff;
*reg |= val << 16;
} else {
case 0:
if (!target_cpus)
return;
+ break;
case 1:
target_cpus = ((1 << nrcpus) - 1) & ~(1 << vcpu_id) & 0xff;
if (addr + size < addr)
return -EINVAL;
+ *ioaddr = addr;
ret = vgic_ioaddr_overlap(kvm);
if (ret)
- return ret;
- *ioaddr = addr;
+ *ioaddr = VGIC_ADDR_UNDEF;
+
return ret;
}
if (dev->entries_nr == 0)
return r;
- r = pci_enable_msix(dev->dev, dev->host_msix_entries, dev->entries_nr);
+ r = pci_enable_msix_exact(dev->dev,
+ dev->host_msix_entries, dev->entries_nr);
if (r)
return r;
if (waitqueue_active(&vcpu->wq))
wake_up_interruptible(&vcpu->wq);
- mmdrop(mm);
+ mmput(mm);
kvm_put_kvm(vcpu->kvm);
}
flush_work(&work->work);
#else
if (cancel_work_sync(&work->work)) {
- mmdrop(work->mm);
+ mmput(work->mm);
kvm_put_kvm(vcpu->kvm); /* == work->vcpu->kvm */
kmem_cache_free(async_pf_cache, work);
}
work->addr = hva;
work->arch = *arch;
work->mm = current->mm;
- atomic_inc(&work->mm->mm_count);
+ atomic_inc(&work->mm->mm_users);
kvm_get_kvm(work->vcpu->kvm);
/* this can't really happen otherwise gfn_to_pfn_async
return 1;
retry_sync:
kvm_put_kvm(work->vcpu->kvm);
- mmdrop(work->mm);
+ mmput(work->mm);
kmem_cache_free(async_pf_cache, work);
return 0;
}
projects / firefly-linux-kernel-4.4.55.git / commitdiff