Pull ARM fixes from Russell King.
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQs
ARM: 7405/1: kexec: call platform_cpu_kill on the killer rather than the victim
ARM: 7403/1: tls: remove covert channel via TPIDRURW
ARM: 7401/1: mm: Fix section mismatches
ARM: OMAP: fix DMA vs memory ordering
ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs
ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler
ARM: 7399/1: vfp: move user vfp state save/restore code out of signal.c
ARM: 7398/1: l2x0: only write to debug registers on PL310
ARM: 7397/1: l2x0: only apply workaround for erratum #753970 on PL310
ARM: 7396/1: errata: only handle ARM erratum #326103 on affected cores
source "arch/arm/Kconfig-nommu"
endif
+config ARM_ERRATA_326103
+ bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+ depends on CPU_V6
+ help
+ Executing a SWP instruction to read-only memory does not set bit 11
+ of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+ treat the access as a read, preventing a COW from occurring and
+ causing the faulting task to livelock.
+
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
depends on CPU_V6 || CPU_V6K
mmc@5000 {
compatible = "arm,primecell";
reg = < 0x5000 0x1000>;
- interrupts = <22>;
+ interrupts = <22 34>;
};
kmi@6000 {
compatible = "arm,pl050", "arm,primecell";
mmc@b000 {
compatible = "arm,primecell";
reg = <0xb000 0x1000>;
- interrupts = <23>;
+ interrupts = <23 34>;
};
};
};
extern void vfp_sync_hwstate(struct thread_info *);
extern void vfp_flush_hwstate(struct thread_info *);
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+ struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+ struct user_vfp_exc __user *);
#endif
/*
.macro set_tls_v6k, tp, tmp1, tmp2
mcr p15, 0, \tp, c13, c0, 3 @ set TLS register
+ mov \tmp1, #0
+ mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
.endm
.macro set_tls_v6, tp, tmp1, tmp2
mov \tmp2, #0xffff0fff
tst \tmp1, #HWCAP_TLS @ hardware TLS available?
mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register
+ movne \tmp1, #0
+ mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0
.endm
}
c = irq_data_get_irq_chip(d);
- if (c->irq_set_affinity)
- c->irq_set_affinity(d, affinity, true);
- else
+ if (!c->irq_set_affinity)
pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+ else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+ cpumask_copy(d->affinity, affinity);
return ret;
}
static int preserve_vfp_context(struct vfp_sigframe __user *frame)
{
- struct thread_info *thread = current_thread_info();
- struct vfp_hard_struct *h = &thread->vfpstate.hard;
const unsigned long magic = VFP_MAGIC;
const unsigned long size = VFP_STORAGE_SIZE;
int err = 0;
- vfp_sync_hwstate(thread);
__put_user_error(magic, &frame->magic, err);
__put_user_error(size, &frame->size, err);
- /*
- * Copy the floating point registers. There can be unused
- * registers see asm/hwcap.h for details.
- */
- err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
- sizeof(h->fpregs));
- /*
- * Copy the status and control register.
- */
- __put_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
- /*
- * Copy the exception registers.
- */
- __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
- __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
- __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+ if (err)
+ return -EFAULT;
- return err ? -EFAULT : 0;
+ return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
}
static int restore_vfp_context(struct vfp_sigframe __user *frame)
{
- struct thread_info *thread = current_thread_info();
- struct vfp_hard_struct *h = &thread->vfpstate.hard;
unsigned long magic;
unsigned long size;
- unsigned long fpexc;
int err = 0;
__get_user_error(magic, &frame->magic, err);
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
- vfp_flush_hwstate(thread);
-
- /*
- * Copy the floating point registers. There can be unused
- * registers see asm/hwcap.h for details.
- */
- err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
- sizeof(h->fpregs));
- /*
- * Copy the status and control register.
- */
- __get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
- /*
- * Sanitise and restore the exception registers.
- */
- __get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
- /* Ensure the VFP is enabled. */
- fpexc |= FPEXC_EN;
- /* Ensure FPINST2 is invalid and the exception flag is cleared. */
- fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
- h->fpexc = fpexc;
-
- __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
- __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
- return err ? -EFAULT : 0;
+ return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
}
#endif
local_fiq_disable();
local_irq_disable();
-#ifdef CONFIG_HOTPLUG_CPU
- platform_cpu_kill(cpu);
-#endif
-
while (1)
cpu_relax();
}
smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+ unsigned int cpu;
+ for_each_cpu(cpu, mask)
+ platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
void smp_send_stop(void)
{
unsigned long timeout;
+ struct cpumask mask;
- if (num_online_cpus() > 1) {
- struct cpumask mask;
- cpumask_copy(&mask, cpu_online_mask);
- cpumask_clear_cpu(smp_processor_id(), &mask);
-
- smp_cross_call(&mask, IPI_CPU_STOP);
- }
+ cpumask_copy(&mask, cpu_online_mask);
+ cpumask_clear_cpu(smp_processor_id(), &mask);
+ smp_cross_call(&mask, IPI_CPU_STOP);
/* Wait up to one second for other CPUs to stop */
timeout = USEC_PER_SEC;
if (num_online_cpus() > 1)
pr_warning("SMP: failed to stop secondary CPUs\n");
+
+ smp_kill_cpus(&mask);
}
/*
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
/*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
- * The test below covers all the write situations, including Java bytecodes
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
*/
- bic r1, r1, #1 << 11 @ clear bit 11 of FSR
+#ifdef CONFIG_ARM_ERRATA_326103
+ ldr ip, =0x4107b36
+ mrc p15, 0, r3, c0, c0, 0 @ get processor id
+ teq ip, r3, lsr #4 @ r0 ARM1136?
+ bne do_DataAbort
tst r5, #PSR_J_BIT @ Java?
+ tsteq r5, #PSR_T_BIT @ Thumb?
bne do_DataAbort
- do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
- ldreq r3, [r4] @ read aborted ARM instruction
+ bic r1, r1, #1 << 11 @ clear bit 11 of FSR
+ ldr r3, [r4] @ read aborted ARM instruction
#ifdef CONFIG_CPU_ENDIAN_BE8
- reveq r3, r3
+ rev r3, r3
#endif
do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
+#endif
b do_DataAbort
static DEFINE_RAW_SPINLOCK(l2x0_lock);
static u32 l2x0_way_mask; /* Bitmask of active ways */
static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
struct l2x0_regs l2x0_saved_regs;
{
void __iomem *base = l2x0_base;
-#ifdef CONFIG_PL310_ERRATA_753970
- /* write to an unmmapped register */
- writel_relaxed(0, base + L2X0_DUMMY_REG);
-#else
- writel_relaxed(0, base + L2X0_CACHE_SYNC);
-#endif
+ writel_relaxed(0, base + sync_reg_offset);
cache_wait(base + L2X0_CACHE_SYNC, 1);
}
}
#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+ if (outer_cache.set_debug)
+ outer_cache.set_debug(val);
+}
-#define debug_writel(val) outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
{
writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
}
{
}
-#define l2x0_set_debug NULL
+#define pl310_set_debug NULL
#endif
#ifdef CONFIG_PL310_ERRATA_588369
else
ways = 8;
type = "L310";
+#ifdef CONFIG_PL310_ERRATA_753970
+ /* Unmapped register. */
+ sync_reg_offset = L2X0_DUMMY_REG;
+#endif
+ outer_cache.set_debug = pl310_set_debug;
break;
case L2X0_CACHE_ID_PART_L210:
ways = (aux >> 13) & 0xf;
outer_cache.flush_all = l2x0_flush_all;
outer_cache.inv_all = l2x0_inv_all;
outer_cache.disable = l2x0_disable;
- outer_cache.set_debug = l2x0_set_debug;
printk(KERN_INFO "%s cache controller enabled\n", type);
printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
#endif
#ifndef CONFIG_SPARSEMEM
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
{
}
#else
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
{
struct memblock_region *reg;
}
}
-static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
- unsigned long phys, const struct mem_type *type)
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+ unsigned long end, unsigned long phys, const struct mem_type *type)
{
pud_t *pud = pud_offset(pgd, addr);
unsigned long next;
l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
l |= OMAP_DMA_CCR_EN;
+ /*
+ * As dma_write() uses IO accessors which are weakly ordered, there
+ * is no guarantee that data in coherent DMA memory will be visible
+ * to the DMA device. Add a memory barrier here to ensure that any
+ * such data is visible prior to enabling DMA.
+ */
+ mb();
p->dma_write(l, CCR, lch);
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
p->dma_write(l, CCR, lch);
}
+ /*
+ * Ensure that data transferred by DMA is visible to any access
+ * after DMA has been disabled. This is important for coherent
+ * DMA regions.
+ */
+ mb();
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[dma_lch_count];
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
put_cpu();
}
+/*
+ * Save the current VFP state into the provided structures and prepare
+ * for entry into a new function (signal handler).
+ */
+int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
+ struct user_vfp_exc __user *ufp_exc)
+{
+ struct thread_info *thread = current_thread_info();
+ struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+ int err = 0;
+
+ /* Ensure that the saved hwstate is up-to-date. */
+ vfp_sync_hwstate(thread);
+
+ /*
+ * Copy the floating point registers. There can be unused
+ * registers see asm/hwcap.h for details.
+ */
+ err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
+ sizeof(hwstate->fpregs));
+ /*
+ * Copy the status and control register.
+ */
+ __put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+ /*
+ * Copy the exception registers.
+ */
+ __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
+ __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+ __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+ if (err)
+ return -EFAULT;
+
+ /* Ensure that VFP is disabled. */
+ vfp_flush_hwstate(thread);
+
+ /*
+ * As per the PCS, clear the length and stride bits for function
+ * entry.
+ */
+ hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
+
+ /*
+ * Disable VFP in the hwstate so that we can detect if it gets
+ * used.
+ */
+ hwstate->fpexc &= ~FPEXC_EN;
+ return 0;
+}
+
+/* Sanitise and restore the current VFP state from the provided structures. */
+int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
+ struct user_vfp_exc __user *ufp_exc)
+{
+ struct thread_info *thread = current_thread_info();
+ struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+ unsigned long fpexc;
+ int err = 0;
+
+ /*
+ * If VFP has been used, then disable it to avoid corrupting
+ * the new thread state.
+ */
+ if (hwstate->fpexc & FPEXC_EN)
+ vfp_flush_hwstate(thread);
+
+ /*
+ * Copy the floating point registers. There can be unused
+ * registers see asm/hwcap.h for details.
+ */
+ err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
+ sizeof(hwstate->fpregs));
+ /*
+ * Copy the status and control register.
+ */
+ __get_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+ /*
+ * Sanitise and restore the exception registers.
+ */
+ __get_user_error(fpexc, &ufp_exc->fpexc, err);
+
+ /* Ensure the VFP is enabled. */
+ fpexc |= FPEXC_EN;
+
+ /* Ensure FPINST2 is invalid and the exception flag is cleared. */
+ fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+ hwstate->fpexc = fpexc;
+
+ __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+ __get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+ return err ? -EFAULT : 0;
+}
+
/*
* VFP hardware can lose all context when a CPU goes offline.
* As we will be running in SMP mode with CPU hotplug, we will save the
projects / firefly-linux-kernel-4.4.55.git / commitdiff