D: portions of the Linux Security Module (LSM) framework and security modules
N: Petr Vandrovec
-E: vandrove@vc.cvut.cz
+E: petr@vandrovec.name
D: Small contributions to ncpfs
D: Matrox framebuffer driver
-S: Chudenicka 8
-S: 10200 Prague 10, Hostivar
-S: Czech Republic
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
N: Thibaut Varene
E: T-Bone@parisc-linux.org
Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
===============================================================
-September 26, 2006
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
-- In This Release
- Identifying Your Adapter
-- Building and Installation
- Command Line Parameters
- Speed and Duplex Configuration
- Additional Configurations
-- Known Issues
- Support
-
-In This Release
-===============
-
-This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters. This driver includes support for Itanium(R)2-based systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
-apply to use with Linux.
-
-The following features are now available in supported kernels:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release. Alternatively, you can use ethtool (version 1.6
-or later), lspci, and ifconfig to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
-support.
-
-
Identifying Your Adapter
========================
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
- http://support.intel.com/support/network/adapter/pro100/21397.htm
+ http://support.intel.com/support/go/network/adapter/idguide.htm
For the latest Intel network drivers for Linux, refer to the following
website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
- http://downloadfinder.intel.com/scripts-df/support_intel.asp
-
+ http://support.intel.com/support/go/network/adapter/home.htm
Command Line Parameters
=======================
-If the driver is built as a module, the following optional parameters
-are used by entering them on the command line with the modprobe command
-using this syntax:
-
- modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two PRO/1000 PCI adapters, entering:
-
- modprobe e1000 TxDescriptors=80,128
-
-loads the e1000 driver with 80 TX descriptors for the first adapter and
-128 TX descriptors for the second adapter.
-
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
parameters, see the application note at:
http://www.intel.com/design/network/applnots/ap450.htm
- A descriptor describes a data buffer and attributes related to
- the data buffer. This information is accessed by the hardware.
-
-
AutoNeg
-------
(Supported only on adapters with copper connections)
NOTE: Refer to the Speed and Duplex section of this readme for more
information on the AutoNeg parameter.
-
Duplex
------
(Supported only on adapters with copper connections)
link partner is forced (either full or half), Duplex defaults to half-
duplex.
-
FlowControl
-----------
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
This parameter controls the automatic generation(Tx) and response(Rx)
to Ethernet PAUSE frames.
-
InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
-Valid Range: 0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+ 4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the
-adapter that is based on the maximum amount of interrupts that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
will generate per second.
Setting InterruptThrottleRate to a value greater or equal to 100
load on the system and can lower CPU utilization under heavy load,
but will increase latency as packets are not processed as quickly.
-The default behaviour of the driver previously assumed a static
-InterruptThrottleRate value of 8000, providing a good fallback value for
-all traffic types,but lacking in small packet performance and latency.
-The hardware can handle many more small packets per second however, and
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types,but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
for this reason an adaptive interrupt moderation algorithm was implemented.
Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
for that traffic.
The algorithm classifies the incoming traffic every interval into
-classes. Once the class is determined, the InterruptThrottleRate value is
-adjusted to suit that traffic type the best. There are three classes defined:
+classes. Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
"Bulk traffic", for large amounts of packets of normal size; "Low latency",
for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or
+packets; and "Lowest latency", for almost completely small packets or
minimal traffic.
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
stepwise to 20000. This default mode is suitable for most applications.
For situations where low latency is vital such as cluster or
grid computing, the algorithm can reduce latency even more when
InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic. If the bytes per second rate is approximately equal, the
+interrupt rate will drop as low as 2000 interrupts per second. If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
be platform-specific. If CPU utilization is not a concern, use
RX_POLLING (NAPI) and default driver settings.
-
-
RxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
incoming packets, at the expense of increased system memory utilization.
Each descriptor is 16 bytes. A receive buffer is also allocated for each
-descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
+descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
on the MTU setting. The maximum MTU size is 16110.
-NOTE: MTU designates the frame size. It only needs to be set for Jumbo
- Frames. Depending on the available system resources, the request
- for a higher number of receive descriptors may be denied. In this
+NOTE: MTU designates the frame size. It only needs to be set for Jumbo
+ Frames. Depending on the available system resources, the request
+ for a higher number of receive descriptors may be denied. In this
case, use a lower number.
-
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
restoring the network connection. To eliminate the potential
for the hang ensure that RxIntDelay is set to 0.
-
RxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
along with RxIntDelay, may improve traffic throughput in specific network
conditions.
-
Speed
-----
(This parameter is supported only on adapters with copper connections.)
partner is set to auto-negotiate, the board will auto-detect the correct
speed. Duplex should also be set when Speed is set to either 10 or 100.
-
TxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
higher number of transmit descriptors may be denied. In this case,
use a lower number.
+TxDescriptorStep
+----------------
+Valid Range: 1 (use every Tx Descriptor)
+ 4 (use every 4th Tx Descriptor)
+
+Default Value: 1 (use every Tx Descriptor)
+
+On certain non-Intel architectures, it has been observed that intense TX
+traffic bursts of short packets may result in an improper descriptor
+writeback. If this occurs, the driver will report a "TX Timeout" and reset
+the adapter, after which the transmit flow will restart, though data may
+have stalled for as much as 10 seconds before it resumes.
+
+The improper writeback does not occur on the first descriptor in a system
+memory cache-line, which is typically 32 bytes, or 4 descriptors long.
+
+Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
+are aligned to the start of a system memory cache line, and so this problem
+will not occur.
+
+NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
+ TxDescriptors available for transmits to 1/4 of the normal allocation.
+ This has a possible negative performance impact, which may be
+ compensated for by allocating more descriptors using the TxDescriptors
+ module parameter.
+
+ There are other conditions which may result in "TX Timeout", which will
+ not be resolved by the use of the TxDescriptorStep parameter. As the
+ issue addressed by this parameter has never been observed on Intel
+ Architecture platforms, it should not be used on Intel platforms.
TxIntDelay
----------
system is reporting dropped transmits, this value may be set too high
causing the driver to run out of available transmit descriptors.
-
TxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
+Copybreak
+---------
+Valid Range: 0-xxxxxxx (0=off)
+Default Value: 256
+Usage: insmod e1000.ko copybreak=128
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value: 0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can turn off
+this parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
Speed and Duplex Configuration
==============================
parameter should not be used. Instead, use the Speed and Duplex parameters
previously mentioned to force the adapter to the same speed and duplex.
-
Additional Configurations
=========================
- Configuring the Driver on Different Distributions
- -------------------------------------------------
- Configuring a network driver to load properly when the system is started
- is distribution dependent. Typically, the configuration process involves
- adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
- as editing other system startup scripts and/or configuration files. Many
- popular Linux distributions ship with tools to make these changes for you.
- To learn the proper way to configure a network device for your system,
- refer to your distribution documentation. If during this process you are
- asked for the driver or module name, the name for the Linux Base Driver
- for the Intel(R) PRO/1000 Family of Adapters is e1000.
-
- As an example, if you install the e1000 driver for two PRO/1000 adapters
- (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
- the following to modules.conf or or modprobe.conf:
-
- alias eth0 e1000
- alias eth1 e1000
- options e1000 Speed=10,100 Duplex=2,1
-
- Viewing Link Messages
- ---------------------
- Link messages will not be displayed to the console if the distribution is
- restricting system messages. In order to see network driver link messages
- on your console, set dmesg to eight by entering the following:
-
- dmesg -n 8
-
- NOTE: This setting is not saved across reboots.
-
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger than
setting in a different location.
Notes:
-
- - To enable Jumbo Frames, increase the MTU size on the interface beyond
- 1500.
+ Degradation in throughput performance may be observed in some Jumbo frames
+ environments. If this is observed, increasing the application's socket buffer
+ size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+ See the specific application manual and /usr/src/linux*/Documentation/
+ networking/ip-sysctl.txt for more details.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
with the maximum Jumbo Frames size of 16128.
- Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
loss of link.
- - Some Intel gigabit adapters that support Jumbo Frames have a frame size
- limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
- The adapters with this limitation are based on the Intel(R) 82571EB,
- 82572EI, 82573L and 80003ES2LAN controller. These correspond to the
- following product names:
- Intel(R) PRO/1000 PT Server Adapter
- Intel(R) PRO/1000 PT Desktop Adapter
- Intel(R) PRO/1000 PT Network Connection
- Intel(R) PRO/1000 PT Dual Port Server Adapter
- Intel(R) PRO/1000 PT Dual Port Network Connection
- Intel(R) PRO/1000 PF Server Adapter
- Intel(R) PRO/1000 PF Network Connection
- Intel(R) PRO/1000 PF Dual Port Server Adapter
- Intel(R) PRO/1000 PB Server Connection
- Intel(R) PRO/1000 PL Network Connection
- Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
- Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
- Intel(R) PRO/1000 PT Quad Port Server Adapter
-
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names:
Intel(R) PRO/1000 Gigabit Server Adapter
Intel(R) PRO/1000 PM Network Connection
- - The following adapters do not support Jumbo Frames:
- Intel(R) 82562V 10/100 Network Connection
- Intel(R) 82566DM Gigabit Network Connection
- Intel(R) 82566DC Gigabit Network Connection
- Intel(R) 82566MM Gigabit Network Connection
- Intel(R) 82566MC Gigabit Network Connection
- Intel(R) 82562GT 10/100 Network Connection
- Intel(R) 82562G 10/100 Network Connection
-
-
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
- NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
- for a more complete ethtool feature set can be enabled by upgrading
- ethtool to ethtool-1.8.1.
-
Enabling Wake on LAN* (WoL)
---------------------------
- WoL is configured through the Ethtool* utility. Ethtool is included with
- all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
- download and install Ethtool from the following website:
- http://sourceforge.net/projects/gkernel.
-
- For instructions on enabling WoL with Ethtool, refer to the website listed
- above.
+ WoL is configured through the Ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
- Wake On LAN is only supported on port A for the following devices:
- Intel(R) PRO/1000 PT Dual Port Network Connection
- Intel(R) PRO/1000 PT Dual Port Server Connection
- Intel(R) PRO/1000 PT Dual Port Server Adapter
- Intel(R) PRO/1000 PF Dual Port Server Adapter
- Intel(R) PRO/1000 PT Quad Port Server Adapter
-
- NAPI
- ----
- NAPI (Rx polling mode) is enabled in the e1000 driver.
-
- See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues
-============
-
-Dropped Receive Packets on Half-duplex 10/100 Networks
-------------------------------------------------------
-If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
-duplex, you may observe occasional dropped receive packets. There are no
-workarounds for this problem in this network configuration. The network must
-be updated to operate in full-duplex, and/or 1000mbps only.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames. If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments. If this is observed, increasing the application's socket
-buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
-may help. See the specific application manual and
-/usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Jumbo Frames on Foundry BigIron 8000 switch
--------------------------------------------
-There is a known issue using Jumbo frames when connected to a Foundry
-BigIron 8000 switch. This is a 3rd party limitation. If you experience
-loss of packets, lower the MTU size.
-
-Allocating Rx Buffers when Using Jumbo Frames
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
-the available memory is heavily fragmented. This issue may be seen with PCI-X
-adapters or with packet split disabled. This can be reduced or eliminated
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes.
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected. All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, either turn on ARP
-filtering by entering:
-
- echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-(this only works if your kernel's version is higher than 2.4.5),
-
-NOTE: This setting is not saved across reboots. The configuration
-change can be made permanent by adding the line:
- net.ipv4.conf.all.arp_filter = 1
-to the file /etc/sysctl.conf
-
- or,
-
-install the interfaces in separate broadcast domains (either in
-different switches or in a switch partitioned to VLANs).
-
-82541/82547 can't link or are slow to link with some link partners
------------------------------------------------------------------
-There is a known compatibility issue with 82541/82547 and some
-low-end switches where the link will not be established, or will
-be slow to establish. In particular, these switches are known to
-be incompatible with 82541/82547:
-
- Planex FXG-08TE
- I-O Data ETG-SH8
-
-To workaround this issue, the driver can be compiled with an override
-of the PHY's master/slave setting. Forcing master or forcing slave
-mode will improve time-to-link.
-
- # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
-
-Where <n> is:
-
- 0 = Hardware default
- 1 = Master mode
- 2 = Slave mode
- 3 = Auto master/slave
-
-Disable rx flow control with ethtool
-------------------------------------
-In order to disable receive flow control using ethtool, you must turn
-off auto-negotiation on the same command line.
-
-For example:
-
- ethtool -A eth? autoneg off rx off
-
-Unplugging network cable while ethtool -p is running
-----------------------------------------------------
-In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
-the network cable while ethtool -p is running will cause the system to
-become unresponsive to keyboard commands, except for control-alt-delete.
-Restarting the system appears to be the only remedy.
-
-
Support
=======
--- /dev/null
+Linux* Driver for Intel(R) Network Connection
+===============================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+The e1000e driver supports all PCI Express Intel(R) Gigabit Network
+Connections, except those that are 82575, 82576 and 82580-based*.
+
+* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
+ the e1000 driver, not the e1000e driver due to the 82546 part being used
+ behind a PCI Express bridge.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+ http://support.intel.com/support/go/network/adapter/home.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTES: For more information about the InterruptThrottleRate,
+ RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+ parameters, see the application note at:
+ http://www.intel.com/design/network/applnots/ap450.htm
+
+InterruptThrottleRate
+---------------------
+Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+ 4=simplified balancing)
+Default Value: 3
+
+The driver can limit the amount of interrupts per second that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
+will generate per second.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes. Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+stepwise to 20000. This default mode is suitable for most applications.
+
+For situations where low latency is vital such as cluster or
+grid computing, the algorithm can reduce latency even more when
+InterruptThrottleRate is set to mode 1. In this mode, which operates
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+70000 for traffic in class "Lowest latency".
+
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic. If the bytes per second rate is approximately equal the
+interrupt rate will drop as low as 2000 interrupts per second. If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
+Setting InterruptThrottleRate to 0 turns off any interrupt moderation
+and may improve small packet latency, but is generally not suitable
+for bulk throughput traffic.
+
+NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+ RxAbsIntDelay parameters. In other words, minimizing the receive
+ and/or transmit absolute delays does not force the controller to
+ generate more interrupts than what the Interrupt Throttle Rate
+ allows.
+
+NOTE: When e1000e is loaded with default settings and multiple adapters
+ are in use simultaneously, the CPU utilization may increase non-
+ linearly. In order to limit the CPU utilization without impacting
+ the overall throughput, we recommend that you load the driver as
+ follows:
+
+ modprobe e1000e InterruptThrottleRate=3000,3000,3000
+
+ This sets the InterruptThrottleRate to 3000 interrupts/sec for
+ the first, second, and third instances of the driver. The range
+ of 2000 to 3000 interrupts per second works on a majority of
+ systems and is a good starting point, but the optimal value will
+ be platform-specific. If CPU utilization is not a concern, use
+ RX_POLLING (NAPI) and default driver settings.
+
+RxIntDelay
+----------
+Valid Range: 0-65535 (0=off)
+Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds. Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic. If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION: When setting RxIntDelay to a value other than 0, adapters may
+ hang (stop transmitting) under certain network conditions. If
+ this occurs a NETDEV WATCHDOG message is logged in the system
+ event log. In addition, the controller is automatically reset,
+ restoring the network connection. To eliminate the potential
+ for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+Valid Range: 0-65535 (0=off)
+Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated. Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time. Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+TxIntDelay
+----------
+Valid Range: 0-65535 (0=off)
+Default Value: 8
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds. Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic. If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+Valid Range: 0-65535 (0=off)
+Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time. Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+Copybreak
+---------
+Valid Range: 0-xxxxxxx (0=off)
+Default Value: 256
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000e/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value: 0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can set this parameter
+in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
+
+IntMode
+-------
+Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
+Default Value: 2
+
+Allows changing the interrupt mode at module load time, without requiring a
+recompile. If the driver load fails to enable a specific interrupt mode, the
+driver will try other interrupt modes, from least to most compatible. The
+interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1)
+interrupts, only MSI and Legacy will be attempted.
+
+CrcStripping
+------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack. If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Set the hardware to ignore all write/erase cycles to the GbE region in the
+ICHx NVM (non-volatile memory). This feature can be disabled by the
+WriteProtectNVM module parameter (enabled by default) only after a hardware
+reset, but the machine must be power cycled before trying to enable writes.
+
+Note: the kernel boot option iomem=relaxed may need to be set if the kernel
+config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
+NVM from user space via ethtool.
+
+Additional Configurations
+=========================
+
+ Jumbo Frames
+ ------------
+ Jumbo Frames support is enabled by changing the MTU to a value larger than
+ the default of 1500. Use the ifconfig command to increase the MTU size.
+ For example:
+
+ ifconfig eth<x> mtu 9000 up
+
+ This setting is not saved across reboots.
+
+ Notes:
+
+ - The maximum MTU setting for Jumbo Frames is 9216. This value coincides
+ with the maximum Jumbo Frames size of 9234 bytes.
+
+ - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
+ poor performance or loss of link.
+
+ - Some adapters limit Jumbo Frames sized packets to a maximum of
+ 4096 bytes and some adapters do not support Jumbo Frames.
+
+
+ Ethtool
+ -------
+ The driver utilizes the ethtool interface for driver configuration and
+ diagnostics, as well as displaying statistical information. We
+ strongly recommend downloading the latest version of Ethtool at:
+
+ http://sourceforge.net/projects/gkernel.
+
+ Speed and Duplex
+ ----------------
+ Speed and Duplex are configured through the Ethtool* utility. For
+ instructions, refer to the Ethtool man page.
+
+ Enabling Wake on LAN* (WoL)
+ ---------------------------
+ WoL is configured through the Ethtool* utility. For instructions on
+ enabling WoL with Ethtool, refer to the Ethtool man page.
+
+ WoL will be enabled on the system during the next shut down or reboot.
+ For this driver version, in order to enable WoL, the e1000e driver must be
+ loaded when shutting down or rebooting the system.
+
+ In most cases Wake On LAN is only supported on port A for multiple port
+ adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
Linux* Base Driver for Intel(R) Network Connection
==================================================
-November 24, 2009
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
-- In This Release
- Identifying Your Adapter
- Known Issues/Troubleshooting
- Support
-In This Release
-===============
-
This file describes the ixgbevf Linux* Base Driver for Intel Network
Connection.
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
- http://support.intel.com/support/network/sb/CS-008441.htm
+ http://support.intel.com/support/go/network/adapter/idguide.htm
Known Issues/Troubleshooting
============================
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net
-
-License
-=======
-
-Intel 10 Gigabit Linux driver.
-Copyright(c) 1999 - 2009 Intel Corporation.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms and conditions of the GNU General Public License,
-version 2, as published by the Free Software Foundation.
-
-This program is distributed in the hope it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-The full GNU General Public License is included in this distribution in
-the file called "COPYING".
-
-Trademarks
-==========
-
-Intel, Itanium, and Pentium are trademarks or registered trademarks of
-Intel Corporation or its subsidiaries in the United States and other
-countries.
-
-* Other names and brands may be claimed as the property of others.
}
if (opt_unpoison && !hwpoison_forget_fd) {
- sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+ sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
hwpoison_forget_fd = checked_open(buf, O_WRONLY);
}
}
S: Maintained
F: arch/arm/mach-s3c6410/
+ARM/S5P ARM ARCHITECTURES
+M: Kukjin Kim <kgene.kim@samsung.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-s5p*/
+
+ARM/SAMSUNG S5P SERIES FIMC SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+M: Sylwester Nawrocki <s.nawrocki@samsung.com>
+L: linux-arm-kernel@lists.infradead.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: arch/arm/plat-s5p/dev-fimc*
+F: arch/arm/plat-samsung/include/plat/*fimc*
+F: drivers/media/video/s5p-fimc/
+
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Haavard Skinnemoen <hskinnemoen@gmail.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
F: include/linux/i2c-gpio.h
S: Maintained
F: drivers/net/ixp2000/
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
-M: Alex Duyck <alexander.h.duyck@intel.com>
+M: Carolyn Wyborny <carolyn.wyborny@intel.com>
+M: Don Skidmore <donald.c.skidmore@intel.com>
+M: Greg Rose <gregory.v.rose@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
S: Supported
+F: Documentation/networking/e100.txt
+F: Documentation/networking/e1000.txt
+F: Documentation/networking/e1000e.txt
+F: Documentation/networking/igb.txt
+F: Documentation/networking/igbvf.txt
+F: Documentation/networking/ixgb.txt
+F: Documentation/networking/ixgbe.txt
+F: Documentation/networking/ixgbevf.txt
F: drivers/net/e100.c
F: drivers/net/e1000/
F: drivers/net/e1000e/
F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
+F: drivers/net/ixgbevf/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
L: linux-wireless@vger.kernel.org
S: Supported
MATROX FRAMEBUFFER DRIVER
-M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linux-fbdev@vger.kernel.org
-S: Maintained
+S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
F: drivers/net/natsemi.c
NCP FILESYSTEM
-M: Petr Vandrovec <vandrove@vc.cvut.cz>
-S: Maintained
+M: Petr Vandrovec <petr@vandrovec.name>
+S: Odd Fixes
F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
F: drivers/media/video/*7146*
F: include/media/*7146*
+SAMSUNG AUDIO (ASoC) DRIVERS
+M: Jassi Brar <jassi.brar@samsung.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Supported
+F: sound/soc/s3c24xx
+
TLG2300 VIDEO4LINUX-2 DRIVER
M: Huang Shijie <shijie8@gmail.com>
M: Kang Yong <kangyong@telegent.com>
WOLFSON MICROELECTRONICS DRIVERS
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
M: Ian Lartey <ian@opensource.wolfsonmicro.com>
+M: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
-W: http://opensource.wolfsonmicro.com/node/8
+W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
-EXTRAVERSION = -rc5
-NAME = Sheep on Meth
+EXTRAVERSION = -rc8
+NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
sigset_t mask;
unsigned long res;
- siginitset(&mask, newmask & ~_BLOCKABLE);
+ siginitset(&mask, newmask & _BLOCKABLE);
res = sigprocmask(how, &mask, &oldmask);
if (!res) {
force_successful_syscall_return();
invalidated are not, resulting in an incoherency in the system page
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+ bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 743622 Cortex-A9
+ (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+ optimisation in the Cortex-A9 Store Buffer may lead to data
+ corruption. This workaround sets a specific bit in the diagnostic
+ register of the Cortex-A9 which disables the Store Buffer
+ optimisation, preventing the defect from occurring. This has no
+ visible impact on the overall performance or power consumption of the
+ processor.
+
endmenu
source "arch/arm/common/Kconfig"
{
/*
* MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
- * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+ * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
* ALU op with S bit and Rd == 15 :
* cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
- if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */
+ if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */
+ (insn & 0x0ff00000) == 0x03400000 || /* Undef */
(insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
return INSN_REJECTED;
* *S (bit 20) updates condition codes
* ADC/SBC/RSC reads the C flag
*/
- insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */
+ insn &= 0xffff0fff; /* Rd = r0 */
asi->insn[0] = insn;
asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
static inline void arch_idle(void)
{
-#ifndef CONFIG_DEBUG_KERNEL
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#else
+#ifndef CONFIG_CPU_ARM920T
/*
* Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Unlike disabling the processor clock via the PMC (above)
- * this allows the processor to be woken via JTAG.
+ * Post-RM9200 processors need this in conjunction with the above
+ * to save power when idle.
*/
cpu_do_idle();
#endif
v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
m2p_set_control(ch, v);
- while (m2p_channel_state(ch) == STATE_ON)
+ while (m2p_channel_state(ch) >= STATE_ON)
cpu_relax();
m2p_set_control(ch, 0x0);
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
+ select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
- imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
+ imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
}
-static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
-}
-
static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
}
#if 0
-static void ct_ca9x4_timer_init(void)
+static void __init ct_ca9x4_timer_init(void)
{
writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
.resource = pmu_resources,
};
-static void ct_ca9x4_init(void)
+static void __init ct_ca9x4_init(void)
{
int i;
}
-static void v2m_timer_init(void)
+static void __init v2m_timer_init(void)
{
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
/*
* Don't allow RAM to be mapped - this causes problems with ARMv6+
*/
- if (WARN_ON(pfn_valid(pfn)))
- return NULL;
+ if (pfn_valid(pfn)) {
+ printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
+ KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+ KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
+ WARN_ON(1);
+ }
type = get_mem_type(mtype);
if (!type)
},
[MT_MEMORY] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_USER | L_PTE_EXEC,
+ L_PTE_WRITE | L_PTE_EXEC,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_NONCACHED] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+ L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
+#ifdef CONFIG_ARM_ERRATA_743622
+ teq r6, #0x20 @ present in r2p0
+ teqne r6, #0x21 @ present in r2p1
+ teqne r6, #0x22 @ present in r2p2
+ mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orreq r10, r10, #1 << 6 @ set bit #6
+ mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
3: mov r10, #0
#ifdef HARVARD_CACHE
b __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
if (IS_ERR(pevent)) {
ret = PTR_ERR(pevent);
} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
+ perf_event_release_kernel(pevent);
pr_warning("oprofile: failed to enable event %d "
"on CPU %d\n", event, cpu);
ret = -EBUSY;
ret = init_driverfs();
if (ret) {
kfree(counter_config);
+ counter_config = NULL;
return ret;
}
struct perf_event *event;
if (*perf_events) {
- exit_driverfs();
for_each_possible_cpu(cpu) {
for (id = 0; id < perf_num_counters; ++id) {
event = perf_events[cpu][id];
}
}
- if (counter_config)
+ if (counter_config) {
kfree(counter_config);
+ exit_driverfs();
+ }
}
#else
int __init oprofile_arch_init(struct oprofile_operations *ops)
config OMAP_DEBUG_LEDS
bool
depends on OMAP_DEBUG_DEVICES
- default y if LEDS
+ default y if LEDS_CLASS
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
+ iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
/* Writing zero to RSYNC_ERR clears the IRQ */
MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
} else {
- complete(&mcbsp_rx->tx_irq_completion);
+ complete(&mcbsp_rx->rx_irq_completion);
}
return IRQ_HANDLED;
static int s3c_adc_resume(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
- unsigned long flags;
clk_enable(adc->clk);
enable_irq(adc->irq);
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <linux/serial_core.h>
+#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+
/* clock information */
static LIST_HEAD(clocks);
return 0;
}
+static int dev_is_s3c_uart(struct device *dev)
+{
+ struct platform_device **pdev = s3c24xx_uart_devs;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++)
+ if (*pdev && dev == &(*pdev)->dev)
+ return 1;
+ return 0;
+}
+
+/*
+ * Serial drivers call get_clock() very early, before platform bus
+ * has been set up, this requires a special check to let them get
+ * a proper clock
+ */
+
+static int dev_is_platform_device(struct device *dev)
+{
+ return dev->bus == &platform_bus_type ||
+ (dev->bus == NULL && dev_is_s3c_uart(dev));
+}
+
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
struct clk *clk = ERR_PTR(-ENOENT);
int idno;
- if (dev == NULL || dev->bus != &platform_bus_type)
+ if (dev == NULL || !dev_is_platform_device(dev))
idno = -1;
else
idno = to_platform_device(dev)->id;
vfree(module->arch.syminfo);
module->arch.syminfo = NULL;
- return module_bug_finalize(hdr, sechdrs, module);
+ return 0;
}
void module_arch_cleanup(struct module *module)
{
- module_bug_cleanup(module);
}
const Elf_Shdr *sechdrs,
struct module *me)
{
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
void mac_mksound( unsigned int freq, unsigned int length )
{
__u32 cfreq = ( freq << 5 ) / 468;
- __u32 flags;
+ unsigned long flags;
int i;
if ( mac_special_bell == NULL )
*/
static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
{
- __u32 flags;
+ unsigned long flags;
/* if the bell is already ringing, ring longer */
if ( mac_bell_duration > 0 )
static void mac_quadra_ring_bell( unsigned long ignored )
{
int i, count = mac_asc_samplespersec / HZ;
- __u32 flags;
+ unsigned long flags;
/*
* we neither want a sound buffer overflow nor underflow, so we need to match
select HAVE_KPROBES
select HAVE_KRETPROBES
select RTC_LIB if !MACH_LOONGSON
+ select GENERIC_ATOMIC64 if !64BIT
mainmenu "Linux/MIPS Kernel Configuration"
select SYS_SUPPORTS_SMP
select SMP_UP
help
- This is a kernel model which is also known a VSMP or lately
- has been marketesed into SMVP.
+ This is a kernel model which is known a VSMP but lately has been
+ marketesed into SMVP.
+ Virtual SMP uses the processor's VPEs to implement virtual
+ processors. In currently available configuration of the 34K processor
+ this allows for a dual processor. Both processors will share the same
+ primary caches; each will obtain the half of the TLB for it's own
+ exclusive use. For a layman this model can be described as similar to
+ what Intel calls Hyperthreading.
+
+ For further information see http://www.linux-mips.org/wiki/34K#VSMP
config MIPS_MT_SMTC
bool "SMTC: Use all TCs on all VPEs for SMP"
help
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
+ is presenting the available TC's of the core as processors to Linux.
+ On currently available 34K processors this means a Linux system will
+ see up to 5 processors. The implementation of the SMTC kernel differs
+ significantly from VSMP and cannot efficiently coexist in the same
+ kernel binary so the choice between VSMP and SMTC is a compile time
+ decision.
+
+ For further information see http://www.linux-mips.org/wiki/34K#SMTC
endchoice
char **prom_argv;
char **prom_envp;
-void prom_init_cmdline(void)
+void __init prom_init_cmdline(void)
{
int i;
}
}
-int prom_get_ethernet_addr(char *ethernet_addr)
+int __init prom_get_ethernet_addr(char *ethernet_addr)
{
char *ethaddr_str;
return 0;
}
-EXPORT_SYMBOL(prom_get_ethernet_addr);
void __init prom_free_prom_memory(void)
{
hostprogs-y := calc_vmlinuz_load_addr
VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
- $(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS))
+ $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
vmlinuzobjs-y += $(obj)/piggy.o
def_bool y
select SPARSEMEM_STATIC
depends on CPU_CAVIUM_OCTEON
+
+config CAVIUM_OCTEON_HELPER
+ def_bool y
+ depends on OCTEON_ETHERNET || PCI
return NOTIFY_OK; /* Let default notifier send signals */
}
-static int cnmips_cu2_setup(void)
+static int __init cnmips_cu2_setup(void)
{
return cu2_notifier(cnmips_cu2_call, 0);
}
obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
-obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o
+obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o
*/
#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
+#else /* !CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
#endif /* CONFIG_64BIT */
/*
#define cu2_notifier(fn, pri) \
({ \
- static struct notifier_block fn##_nb __cpuinitdata = { \
+ static struct notifier_block fn##_nb = { \
.notifier_call = fn, \
.priority = pri \
}; \
*/
struct gic_intr_map {
unsigned int cpunum; /* Directed to this CPU */
+#define GIC_UNUSED 0xdead /* Dummy data */
unsigned int pin; /* Directed to this Pin */
unsigned int polarity; /* Polarity : +/- */
unsigned int trigtype; /* Trigger : Edge/Levl */
#ifndef __ASM_MACH_TX49XX_KMALLOC_H
#define __ASM_MACH_TX49XX_KMALLOC_H
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
#define GIC_EXT_INTR(x) x
-/* Dummy data */
-#define X 0xdead
-
/* External Interrupts used for IPI */
#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16
#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17
((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
#endif
#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+
+/*
+ * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad
+ * (lmo) rsp. 8431fd094d625b94d364fe393076ccef88e6ce18 (kernel.org). The
+ * discussion can be found in lkml posting
+ * <a2ebde260608230500o3407b108hc03debb9da6e62c@mail.gmail.com> which is
+ * archived at http://lists.linuxcoding.com/kernel/2006-q3/msg17360.html
+ *
+ * It is unclear if the misscompilations mentioned in
+ * http://lkml.org/lkml/2010/8/8/138 also affect MIPS so we keep this one
+ * until GCC 3.x has been retired before we can apply
+ * https://patchwork.linux-mips.org/patch/1541/
+ */
+
#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#ifdef __ARCH_SI_TRAPNO
int _trapno; /* TRAP # which caused the signal */
#endif
+ short _addr_lsb;
} _sigfault;
/* SIGPOLL, SIGXFSZ (To do ...) */
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
+#define _TIF_WORK_MASK (0x0000ffef & \
+ ~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP)
#define __NR_perf_event_open (__NR_Linux + 333)
#define __NR_accept4 (__NR_Linux + 334)
#define __NR_recvmmsg (__NR_Linux + 335)
+#define __NR_fanotify_init (__NR_Linux + 336)
+#define __NR_fanotify_mark (__NR_Linux + 337)
+#define __NR_prlimit64 (__NR_Linux + 338)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 335
+#define __NR_Linux_syscalls 338
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 335
+#define __NR_O32_Linux_syscalls 338
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_perf_event_open (__NR_Linux + 292)
#define __NR_accept4 (__NR_Linux + 293)
#define __NR_recvmmsg (__NR_Linux + 294)
+#define __NR_fanotify_init (__NR_Linux + 295)
+#define __NR_fanotify_mark (__NR_Linux + 296)
+#define __NR_prlimit64 (__NR_Linux + 297)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 294
+#define __NR_Linux_syscalls 297
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 294
+#define __NR_64_Linux_syscalls 297
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_accept4 (__NR_Linux + 297)
#define __NR_recvmmsg (__NR_Linux + 298)
#define __NR_getdents64 (__NR_Linux + 299)
+#define __NR_fanotify_init (__NR_Linux + 300)
+#define __NR_fanotify_mark (__NR_Linux + 301)
+#define __NR_prlimit64 (__NR_Linux + 302)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 299
+#define __NR_Linux_syscalls 302
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 299
+#define __NR_N32_Linux_syscalls 302
#ifdef __KERNEL__
#include <asm/io.h>
#include <asm/gic.h>
#include <asm/gcmpregs.h>
-#include <asm/mips-boards/maltaint.h>
#include <asm/irq.h>
#include <linux/hardirq.h>
#include <asm-generic/bitops/find.h>
int i;
irq -= _irqbase;
- pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq);
+ pr_debug("%s(%d) called\n", __func__, irq);
cpumask_and(&tmp, cpumask, cpu_online_mask);
if (cpus_empty(tmp))
return -1;
/* Setup specifics */
for (i = 0; i < mapsize; i++) {
cpu = intrmap[i].cpunum;
- if (cpu == X)
+ if (cpu == GIC_UNUSED)
continue;
if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
continue;
struct pt_regs *regs = args->regs;
int trap = (regs->cp0_cause & 0x7c) >> 2;
- /* Userpace events, ignore. */
+ /* Userspace events, ignore. */
if (user_mode(regs))
return NOTIFY_DONE;
memset(&tz, 0, sizeof(tz));
if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
(int)&tz, 0, 0)) == 0)
- ret.retval = tv.tv_sec;
+ ret.retval = tv.tv_sec;
break;
case MTSP_SYSCALL_EXIT:
{
return sys_lookup_dcookie(merge_64(a0, a1), buf, len);
}
+
+SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags,
+ u64, a3, u64, a4, int, dfd, const char __user *, pathname)
+{
+ return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
+ dfd, pathname);
+}
sys sys_rt_tgsigqueueinfo 4
sys sys_perf_event_open 5
sys sys_accept4 4
- sys sys_recvmmsg 5
+ sys sys_recvmmsg 5 /* 4335 */
+ sys sys_fanotify_init 2
+ sys sys_fanotify_mark 6
+ sys sys_prlimit64 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_pipe2
PTR sys_inotify_init1
PTR sys_preadv
- PTR sys_pwritev /* 5390 */
+ PTR sys_pwritev /* 5290 */
PTR sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
- PTR sys_recvmmsg
+ PTR sys_recvmmsg
+ PTR sys_fanotify_init /* 5295 */
+ PTR sys_fanotify_mark
+ PTR sys_prlimit64
.size sys_call_table,.-sys_call_table
PTR sys_perf_event_open
PTR sys_accept4
PTR compat_sys_recvmmsg
- PTR sys_getdents
+ PTR sys_getdents64
+ PTR sys_fanotify_init /* 6300 */
+ PTR sys_fanotify_mark
+ PTR sys_prlimit64
.size sysn32_call_table,.-sysn32_call_table
PTR compat_sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
- PTR compat_sys_recvmmsg
+ PTR compat_sys_recvmmsg /* 4335 */
+ PTR sys_fanotify_init
+ PTR sys_32_fanotify_mark
+ PTR sys_prlimit64
.size sys_call_table,.-sys_call_table
static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
{
+ gfp_t dma_flag;
+
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
-#ifdef CONFIG_ZONE_DMA
+#ifdef CONFIG_ISA
if (dev == NULL)
- gfp |= __GFP_DMA;
- else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
- gfp |= __GFP_DMA;
+ dma_flag = __GFP_DMA;
else
#endif
-#ifdef CONFIG_ZONE_DMA32
+#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA)
if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
- gfp |= __GFP_DMA32;
+ dma_flag = __GFP_DMA;
+ else if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA32;
+ else
+#endif
+#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA)
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA32;
+ else
+#endif
+#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA;
else
#endif
- ;
+ dma_flag = 0;
/* Don't invoke OOM killer */
gfp |= __GFP_NORETRY;
- return gfp;
+ return gfp | dma_flag;
}
void *dma_alloc_noncoherent(struct device *dev, size_t size,
#define tc_lsize 32
extern unsigned long icache_way_size, dcache_way_size;
-unsigned long tcache_size;
+static unsigned long tcache_size;
#include <asm/r4kcache.h>
*/
#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
+#define X GIC_UNUSED
+
static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
/* The remainder of this table is initialised by fill_ipi_map */
};
+#undef X
/*
* GCMP needs to be detected before any SMP initialisation
if (!((pcicvalue == PCIM_H_EA) ||
(pcicvalue == PCIM_H_IA_FIX) ||
(pcicvalue == PCIM_H_IA_RR))) {
- pr_err(KERN_ERR "PCI init error!!!\n");
+ pr_err("PCI init error!!!\n");
/* Not in Host Mode, return ERROR */
return -1;
}
*/
#include <linux/kernel.h>
+#include <asm/processor.h>
#include <asm/reboot.h>
#include <glb.h>
void pnx8550_machine_restart(char *command)
{
- char head[] = "************* Machine restart *************";
- char foot[] = "*******************************************";
-
- printk("\n\n");
- printk("%s\n", head);
- if (command != NULL)
- printk("* %s\n", command);
- printk("%s\n", foot);
-
PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
}
void pnx8550_machine_halt(void)
{
- printk("*** Machine halt. (Not implemented) ***\n");
-}
-
-void pnx8550_machine_power_off(void)
-{
- printk("*** Machine power off. (Not implemented) ***\n");
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
}
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern char *prom_getcmdline(void);
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_power_off;
+ pm_power_off = pnx8550_machine_halt;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
const Elf_Shdr *sechdrs,
struct module *me)
{
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
/*
*/
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
# Makefile for the MN10300-specific memory management code
#
+cacheflush-y := cache.o cache-mn10300.o
+cacheflush-$(CONFIG_MN10300_CACHE_WBACK) += cache-flush-mn10300.o
+
+cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
+
obj-y := \
init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
- misalignment.o dma-alloc.o
-
-ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
-obj-y += cache.o cache-mn10300.o
-ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
-obj-y += cache-flush-mn10300.o
-endif
-endif
+ misalignment.o dma-alloc.o $(cacheflush-y)
--- /dev/null
+/* Handle the cache being disabled
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/mm.h>
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+ if (end < start)
+ return -EINVAL;
+ return 0;
+}
void flush_icache_range(unsigned long start, unsigned long end)
{
#ifdef CONFIG_MN10300_CACHE_WBACK
- unsigned long addr, size, off;
+ unsigned long addr, size, base, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
+ if (end > 0x80000000UL) {
+ /* addresses above 0xa0000000 do not go through the cache */
+ if (end > 0xa0000000UL) {
+ end = 0xa0000000UL;
+ if (start >= end)
+ return;
+ }
+
+ /* kernel addresses between 0x80000000 and 0x9fffffff do not
+ * require page tables, so we just map such addresses directly */
+ base = (start >= 0x80000000UL) ? start : 0x80000000UL;
+ mn10300_dcache_flush_range(base, end);
+ if (base == start)
+ goto invalidate;
+ end = base;
+ }
+
for (; start < end; start += size) {
/* work out how much of the page to flush */
off = start & (PAGE_SIZE - 1);
}
#endif
+invalidate:
mn10300_icache_inv();
}
EXPORT_SYMBOL(flush_icache_range);
nsyms = newptr - (Elf_Sym *)symhdr->sh_addr;
DEBUGP("NEW num_symtab %lu\n", nsyms);
symhdr->sh_size = nsyms * sizeof(Elf_Sym);
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
deregister_unwind_table(mod);
- module_bug_cleanup(mod);
}
const Elf_Shdr *sechdrs, struct module *me)
{
const Elf_Shdr *sect;
- int err;
-
- err = module_bug_finalize(hdr, sechdrs, me);
- if (err)
- return err;
/* Apply feature fixups */
sect = find_section(hdr, sechdrs, "__ftr_fixup");
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
int id_match = 0;
if (dev == NULL || id == NULL)
- return NULL;
+ return clk;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING EFIKA_PLATFORM_NAME
": Can't get bus-range for %s\n", pcictrl->full_name);
- return;
+ goto out_put;
}
if (bus_range[1] == bus_range[0])
printk(" controlled by %s\n", pcictrl->full_name);
printk("\n");
- hose = pcibios_alloc_controller(of_node_get(pcictrl));
+ hose = pcibios_alloc_controller(pcictrl);
if (!hose) {
printk(KERN_WARNING EFIKA_PLATFORM_NAME
": Can't allocate PCI controller structure for %s\n",
pcictrl->full_name);
- return;
+ goto out_put;
}
hose->first_busno = bus_range[0];
hose->ops = &rtas_pci_ops;
pci_process_bridge_OF_ranges(hose, pcictrl, 0);
+ return;
+out_put:
+ of_node_put(pcictrl);
}
#else
clrbits32(&simple_gpio->simple_dvo, sync | out);
clrbits8(&wkup_gpio->wkup_dvo, reset);
- /* wait at lease 1 us */
- udelay(2);
+ /* wait for 1 us */
+ udelay(1);
/* Deassert reset */
setbits8(&wkup_gpio->wkup_dvo, reset);
+ /* wait at least 200ns */
+ /* 7 ~= (200ns * timebase) / ns2sec */
+ __delay(7);
+
/* Restore pin-muxing */
out_be32(&simple_gpio->port_config, mux);
{
vfree(me->arch.syminfo);
me->arch.syminfo = NULL;
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
int ret = 0;
ret |= module_dwarf_finalize(hdr, sechdrs, me);
- ret |= module_bug_finalize(hdr, sechdrs, me);
return ret;
}
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
module_dwarf_cleanup(mod);
}
netif_wake_queue(dev);
}
-static int uml_net_set_mac(struct net_device *dev, void *addr)
-{
- struct uml_net_private *lp = netdev_priv(dev);
- struct sockaddr *hwaddr = addr;
-
- spin_lock_irq(&lp->lock);
- eth_mac_addr(dev, hwaddr->sa_data);
- spin_unlock_irq(&lp->lock);
-
- return 0;
-}
-
static int uml_net_change_mtu(struct net_device *dev, int new_mtu)
{
dev->mtu = new_mtu;
.ndo_start_xmit = uml_net_start_xmit,
.ndo_set_multicast_list = uml_net_set_multicast_list,
.ndo_tx_timeout = uml_net_tx_timeout,
- .ndo_set_mac_address = uml_net_set_mac,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = uml_net_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
((*transport->user->init)(&lp->user, dev) != 0))
goto out_unregister;
- eth_mac_addr(dev, device->mac);
+ /* don't use eth_mac_addr, it will not work here */
+ memcpy(dev->dev_addr, device->mac, ETH_ALEN);
dev->mtu = transport->user->mtu;
dev->netdev_ops = ¨_netdev_ops;
dev->ethtool_ops = ¨_net_ethtool_ops;
#include <asm/ia32.h>
#undef WARN_OLD
-#undef CORE_DUMP /* probably broken */
+#undef CORE_DUMP /* definitely broken */
static int load_aout_binary(struct linux_binprm *, struct pt_regs *regs);
static int load_aout_library(struct file *);
* macros to write out all the necessary info.
*/
-static int dump_write(struct file *file, const void *addr, int nr)
-{
- return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
+#include <linux/coredump.h>
#define DUMP_WRITE(addr, nr) \
if (!dump_write(file, (void *)(addr), (nr))) \
goto end_coredump;
-#define DUMP_SEEK(offset) \
- if (file->f_op->llseek) { \
- if (file->f_op->llseek(file, (offset), 0) != (offset)) \
- goto end_coredump; \
- } else \
- file->f_pos = (offset)
+#define DUMP_SEEK(offset) \
+ if (!dump_seek(file, offset)) \
+ goto end_coredump;
#define START_DATA() (u.u_tsize << PAGE_SHIFT)
#define START_STACK(u) (u.start_stack)
dump_size = dump.u_ssize << PAGE_SHIFT;
DUMP_WRITE(dump_start, dump_size);
}
- /*
- * Finally dump the task struct. Not be used by gdb, but
- * could be useful
- */
- set_fs(KERNEL_DS);
- DUMP_WRITE(current, sizeof(*current));
end_coredump:
set_fs(fs);
return has_dumped;
unsigned int ecx;
} states[ACPI_PROCESSOR_MAX_POWER];
};
-static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */
+static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */
static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
return -ENODEV;
out_obj = output.pointer;
- if (out_obj->type != ACPI_TYPE_BUFFER)
- return -ENODEV;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ ret = -ENODEV;
+ goto out_free;
+ }
errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
- if (errors)
- return -ENODEV;
+ if (errors) {
+ ret = -ENODEV;
+ goto out_free;
+ }
supported = *((u32 *)(out_obj->buffer.pointer + 4));
- if (!(supported & 0x1))
- return -ENODEV;
+ if (!(supported & 0x1)) {
+ ret = -ENODEV;
+ goto out_free;
+ }
out_free:
kfree(output.pointer);
address = (low & MASK_BLKPTR_LO) >> 21;
if (!address)
break;
+
address += MCG_XBLK_ADDR;
} else
++address;
if (rdmsr_safe(address, &low, &high))
break;
- if (!(high & MASK_VALID_HI)) {
- if (block)
- continue;
- else
- break;
- }
+ if (!(high & MASK_VALID_HI))
+ continue;
if (!(high & MASK_CNTP_HI) ||
(high & MASK_LOCKED_HI))
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_core_power_limit_count.attr,
thermal_attr_group.name);
- if (cpu_has(c, X86_FEATURE_PTS))
+ if (cpu_has(c, X86_FEATURE_PTS)) {
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_throttle_count.attr,
thermal_attr_group.name);
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_power_limit_count.attr,
thermal_attr_group.name);
+ }
return err;
}
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
int overflow;
- if (!test_bit(idx, cpuc->active_mask))
+ if (!test_bit(idx, cpuc->active_mask)) {
+ /* catch in-flight IRQs */
+ if (__test_and_clear_bit(idx, cpuc->running))
+ handled++;
continue;
+ }
event = cpuc->events[idx];
hwc = &event->hw;
apply_paravirt(pseg, pseg + para->sh_size);
}
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
alternatives_smp_module_del(mod);
- module_bug_cleanup(mod);
}
control->iopm_base_pa = iopm_base;
control->msrpm_base_pa = __pa(svm->msrpm);
- control->tsc_offset = 0;
control->int_ctl = V_INTR_MASKING_MASK;
init_seg(&save->es);
svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
svm->asid_generation = 0;
init_vmcb(svm);
+ svm->vmcb->control.tsc_offset = 0-native_read_tsc();
err = fx_init(&svm->vcpu);
if (err)
return -1;
}
- for_each_node_mask(i, nodes_parsed)
- e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
- nodes[i].end >> PAGE_SHIFT);
+ for (i = 0; i < num_node_memblks; i++)
+ e820_register_active_regions(memblk_nodeid[i],
+ node_memblk_range[i].start >> PAGE_SHIFT,
+ node_memblk_range[i].end >> PAGE_SHIFT);
+
/* for out of order entries in SRAT */
sort_node_map();
if (!nodes_cover_memory(nodes)) {
case 0x0f:
case 0x16:
case 0x17:
+ case 0x1d:
*cpu_type = "i386/core_2";
break;
case 0x1a:
__init void xen_hvm_init_time_ops(void)
{
/* vector callback is needed otherwise we cannot receive interrupts
- * on cpu > 0 */
- if (!xen_have_vector_callback && num_present_cpus() > 1)
+ * on cpu > 0 and at this point we don't know how many cpus are
+ * available */
+ if (!xen_have_vector_callback)
return;
if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
printk(KERN_INFO "Xen doesn't support pvclock on HVM,"
}
}
kobject_uevent(&e->kobj, KOBJ_ADD);
+ e->registered = 1;
}
return error;
}
{
kobject_uevent(&e->kobj, KOBJ_REMOVE);
kobject_del(&e->kobj);
+ e->registered = 0;
}
void elv_unregister_queue(struct request_queue *q)
spin_unlock_irq(q->queue_lock);
- __elv_unregister_queue(old_elevator);
+ if (old_elevator->registered) {
+ __elv_unregister_queue(old_elevator);
- err = elv_register_queue(q);
- if (err)
- goto fail_register;
+ err = elv_register_queue(q);
+ if (err)
+ goto fail_register;
+ }
/*
* finally exit old elevator and turn off BYPASS.
Be aware that using this interface can confuse your Embedded
Controller in a way that a normal reboot is not enough. You then
- have to power of your system, and remove the laptop battery for
+ have to power off your system, and remove the laptop battery for
some seconds.
An Embedded Controller typically is available on laptops and reads
sensor values like battery state and temperature.
device_remove_file(&device->dev, &dev_attr_rrtime);
}
-/* Query firmware how many CPUs should be idle */
-static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
+/*
+ * Query firmware how many CPUs should be idle
+ * return -1 on failure
+ */
+static int acpi_pad_pur(acpi_handle handle)
{
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *package;
- int rev, num, ret = -EINVAL;
+ int num = -1;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer)))
- return -EINVAL;
+ return num;
if (!buffer.length || !buffer.pointer)
- return -EINVAL;
+ return num;
package = buffer.pointer;
- if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
- goto out;
- rev = package->package.elements[0].integer.value;
- num = package->package.elements[1].integer.value;
- if (rev != 1 || num < 0)
- goto out;
- *num_cpus = num;
- ret = 0;
-out:
+
+ if (package->type == ACPI_TYPE_PACKAGE &&
+ package->package.count == 2 &&
+ package->package.elements[0].integer.value == 1) /* rev 1 */
+
+ num = package->package.elements[1].integer.value;
+
kfree(buffer.pointer);
- return ret;
+ return num;
}
/* Notify firmware how many CPUs are idle */
uint32_t idle_cpus;
mutex_lock(&isolated_cpus_lock);
- if (acpi_pad_pur(handle, &num_cpus)) {
+ num_cpus = acpi_pad_pur(handle);
+ if (num_cpus < 0) {
mutex_unlock(&isolated_cpus_lock);
return;
}
ACPI_BITMASK_POWER_BUTTON_STATUS | \
ACPI_BITMASK_SLEEP_BUTTON_STATUS | \
ACPI_BITMASK_RT_CLOCK_STATUS | \
+ ACPI_BITMASK_PCIEXP_WAKE_DISABLE | \
ACPI_BITMASK_WAKE_STATUS)
#define ACPI_BITMASK_TIMER_ENABLE 0x0001
*
* DESCRIPTION: Reacquire the interpreter execution region from within the
* interpreter code. Failure to enter the interpreter region is a
- * fatal system error. Used in conjuction with
+ * fatal system error. Used in conjunction with
* relinquish_interpreter
*
******************************************************************************/
/*
* 16-, 32-, and 64-bit cases must use the move macros that perform
- * endian conversion and/or accomodate hardware that cannot perform
+ * endian conversion and/or accommodate hardware that cannot perform
* misaligned memory transfers
*/
case ACPI_RSC_MOVE16:
depends on ACPI_APEI
help
ERST is a way provided by APEI to save and retrieve hardware
- error infomation to and from a persistent store. Enable this
+ error information to and from a persistent store. Enable this
if you want to debugging and testing the ERST kernel support
and firmware implementation.
int apei_resources_request(struct apei_resources *resources,
const char *desc)
{
- struct apei_res *res, *res_bak;
+ struct apei_res *res, *res_bak = NULL;
struct resource *r;
+ int rc;
- apei_resources_sub(resources, &apei_resources_all);
+ rc = apei_resources_sub(resources, &apei_resources_all);
+ if (rc)
+ return rc;
+ rc = -EINVAL;
list_for_each_entry(res, &resources->iomem, list) {
r = request_mem_region(res->start, res->end - res->start,
desc);
}
}
- apei_resources_merge(&apei_resources_all, resources);
+ rc = apei_resources_merge(&apei_resources_all, resources);
+ if (rc) {
+ pr_err(APEI_PFX "Fail to merge resources!\n");
+ goto err_unmap_ioport;
+ }
return 0;
err_unmap_ioport:
break;
release_mem_region(res->start, res->end - res->start);
}
- return -EINVAL;
+ return rc;
}
EXPORT_SYMBOL_GPL(apei_resources_request);
void apei_resources_release(struct apei_resources *resources)
{
+ int rc;
struct apei_res *res;
list_for_each_entry(res, &resources->iomem, list)
list_for_each_entry(res, &resources->ioport, list)
release_region(res->start, res->end - res->start);
- apei_resources_sub(&apei_resources_all, resources);
+ rc = apei_resources_sub(&apei_resources_all, resources);
+ if (rc)
+ pr_err(APEI_PFX "Fail to sub resources!\n");
}
EXPORT_SYMBOL_GPL(apei_resources_release);
static int einj_check_table(struct acpi_table_einj *einj_tab)
{
- if (einj_tab->header_length != sizeof(struct acpi_table_einj))
+ if ((einj_tab->header_length !=
+ (sizeof(struct acpi_table_einj) - sizeof(einj_tab->header)))
+ && (einj_tab->header_length != sizeof(struct acpi_table_einj)))
return -EINVAL;
if (einj_tab->header.length < sizeof(struct acpi_table_einj))
return -EINVAL;
* APEI Error Record Serialization Table debug support
*
* ERST is a way provided by APEI to save and retrieve hardware error
- * infomation to and from a persistent store. This file provide the
+ * information to and from a persistent store. This file provide the
* debugging/testing support for ERST kernel support and firmware
* implementation.
*
goto out;
}
if (len > erst_dbg_buf_len) {
- kfree(erst_dbg_buf);
+ void *p;
rc = -ENOMEM;
- erst_dbg_buf = kmalloc(len, GFP_KERNEL);
- if (!erst_dbg_buf)
+ p = kmalloc(len, GFP_KERNEL);
+ if (!p)
goto out;
+ kfree(erst_dbg_buf);
+ erst_dbg_buf = p;
erst_dbg_buf_len = len;
goto retry;
}
if (mutex_lock_interruptible(&erst_dbg_mutex))
return -EINTR;
if (usize > erst_dbg_buf_len) {
- kfree(erst_dbg_buf);
+ void *p;
rc = -ENOMEM;
- erst_dbg_buf = kmalloc(usize, GFP_KERNEL);
- if (!erst_dbg_buf)
+ p = kmalloc(usize, GFP_KERNEL);
+ if (!p)
goto out;
+ kfree(erst_dbg_buf);
+ erst_dbg_buf = p;
erst_dbg_buf_len = usize;
}
rc = copy_from_user(erst_dbg_buf, ubuf, usize);
* APEI Error Record Serialization Table support
*
* ERST is a way provided by APEI to save and retrieve hardware error
- * infomation to and from a persistent store.
+ * information to and from a persistent store.
*
* For more information about ERST, please refer to ACPI Specification
* version 4.0, section 17.4.
{
int rc;
u64 offset;
+ void *src, *dst;
+
+ /* ioremap does not work in interrupt context */
+ if (in_interrupt()) {
+ pr_warning(ERST_PFX
+ "MOVE_DATA can not be used in interrupt context");
+ return -EBUSY;
+ }
rc = __apei_exec_read_register(entry, &offset);
if (rc)
return rc;
- memmove((void *)ctx->dst_base + offset,
- (void *)ctx->src_base + offset,
- ctx->var2);
+
+ src = ioremap(ctx->src_base + offset, ctx->var2);
+ if (!src)
+ return -ENOMEM;
+ dst = ioremap(ctx->dst_base + offset, ctx->var2);
+ if (!dst)
+ return -ENOMEM;
+
+ memmove(dst, src, ctx->var2);
+
+ iounmap(src);
+ iounmap(dst);
return 0;
}
static int erst_check_table(struct acpi_table_erst *erst_tab)
{
- if (erst_tab->header_length != sizeof(struct acpi_table_erst))
+ if ((erst_tab->header_length !=
+ (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header)))
+ && (erst_tab->header_length != sizeof(struct acpi_table_einj)))
return -EINVAL;
if (erst_tab->header.length < sizeof(struct acpi_table_erst))
return -EINVAL;
struct ghes *ghes = NULL;
int rc = -EINVAL;
- generic = ghes_dev->dev.platform_data;
+ generic = *(struct acpi_hest_generic **)ghes_dev->dev.platform_data;
if (!generic->enabled)
return -ENODEV;
static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
{
- struct acpi_hest_generic *generic;
struct platform_device *ghes_dev;
struct ghes_arr *ghes_arr = data;
int rc;
if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
return 0;
- generic = (struct acpi_hest_generic *)hest_hdr;
- if (!generic->enabled)
+
+ if (!((struct acpi_hest_generic *)hest_hdr)->enabled)
return 0;
ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id);
if (!ghes_dev)
return -ENOMEM;
- ghes_dev->dev.platform_data = generic;
+
+ rc = platform_device_add_data(ghes_dev, &hest_hdr, sizeof(void *));
+ if (rc)
+ goto err;
+
rc = platform_device_add(ghes_dev);
if (rc)
goto err;
list_add_tail_rcu(&map->list, &acpi_iomaps);
spin_unlock_irqrestore(&acpi_iomaps_lock, flags);
- return vaddr + (paddr - pg_off);
+ return map->vaddr + (paddr - map->paddr);
err_unmap:
iounmap(vaddr);
return NULL;
POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_POWER_NOW,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
acpi_osi_setup("!Windows 2006");
+ acpi_osi_setup("!Windows 2006 SP1");
+ acpi_osi_setup("!Windows 2006 SP2");
return 0;
}
static int __init dmi_disable_osi_win7(const struct dmi_system_id *d)
},
},
{
+ /*
+ * There have a NVIF method in MSI GX723 DSDT need call by Nvidia
+ * driver (e.g. nouveau) when user press brightness hotkey.
+ * Currently, nouveau driver didn't do the job and it causes there
+ * have a infinite while loop in DSDT when user press hotkey.
+ * We add MSI GX723's dmi information to this table for workaround
+ * this issue.
+ * Will remove MSI GX723 from the table after nouveau grows support.
+ */
+ .callback = dmi_disable_osi_vista,
+ .ident = "MSI GX723",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "GX723"),
+ },
+ },
+ {
.callback = dmi_disable_osi_vista,
.ident = "Sony VGN-NS10J_S",
.matches = {
},
},
{
+ .callback = dmi_disable_osi_vista,
+ .ident = "Toshiba Satellite L355",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"),
+ },
+ },
+ {
.callback = dmi_disable_osi_win7,
.ident = "ASUS K50IJ",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"),
},
},
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Toshiba P305D",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"),
+ },
+ },
/*
* BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
static int set_power_nocheck(const struct dmi_system_id *id)
{
printk(KERN_NOTICE PREFIX "%s detected - "
- "disable power check in power transistion\n", id->ident);
+ "disable power check in power transition\n", id->ident);
acpi_power_nocheck = 1;
return 0;
}
static struct dmi_system_id dsdt_dmi_table[] __initdata = {
/*
- * Insyde BIOS on some TOSHIBA machines corrupt the DSDT.
+ * Invoke DSDT corruption work-around on all Toshiba Satellite.
* https://bugzilla.kernel.org/show_bug.cgi?id=14679
*/
{
.callback = set_copy_dsdt,
- .ident = "TOSHIBA Satellite A505",
+ .ident = "TOSHIBA Satellite",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A505"),
- },
- },
- {
- .callback = set_copy_dsdt,
- .ident = "TOSHIBA Satellite L505D",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L505D"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
},
},
{}
/*
* If the laptop falls into the DMI check table, the power state check
- * will be disabled in the course of device power transistion.
+ * will be disabled in the course of device power transition.
*/
dmi_check_system(power_nocheck_dmi_table);
acpi_bus_unregister_driver(&acpi_fan_driver);
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
+#endif
return;
}
}
static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
- {
- set_no_mwait, "IFL91 board", {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
- DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
{
set_no_mwait, "Extensa 5220", {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
early_init_pdc, NULL, NULL, NULL);
+ acpi_get_devices("ACPI0007", early_init_pdc, NULL, NULL);
}
printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
acpi_idle_driver.name);
} else {
- printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s",
+ printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n",
cpuidle_get_driver()->name);
}
if (!try_module_get(calling_module))
return -EINVAL;
- /* is_done is set to negative if an error occured,
- * and to postitive if _no_ error occured, but SMM
+ /* is_done is set to negative if an error occurred,
+ * and to postitive if _no_ error occurred, but SMM
* was already notified. This avoids double notification
* which might lead to unexpected results...
*/
return 0;
}
+static int __init init_nvs_nosave(const struct dmi_system_id *d)
+{
+ acpi_nvs_nosave();
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
},
},
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-SR11M",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Everex StepNote Series",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
ACPI_DEBUG_INIT(ACPI_LV_EVENTS),
};
-static int param_get_debug_layer(char *buffer, struct kernel_param *kp)
+static int param_get_debug_layer(char *buffer, const struct kernel_param *kp)
{
int result = 0;
int i;
return result;
}
-static int param_get_debug_level(char *buffer, struct kernel_param *kp)
+static int param_get_debug_level(char *buffer, const struct kernel_param *kp)
{
int result = 0;
int i;
return result;
}
-module_param_call(debug_layer, param_set_uint, param_get_debug_layer,
- &acpi_dbg_layer, 0644);
-module_param_call(debug_level, param_set_uint, param_get_debug_level,
- &acpi_dbg_level, 0644);
+static struct kernel_param_ops param_ops_debug_layer = {
+ .set = param_set_uint,
+ .get = param_get_debug_layer,
+};
+
+static struct kernel_param_ops param_ops_debug_level = {
+ .set = param_set_uint,
+ .get = param_get_debug_level,
+};
+
+module_param_cb(debug_layer, ¶m_ops_debug_layer, &acpi_dbg_layer, 0644);
+module_param_cb(debug_level, ¶m_ops_debug_level, &acpi_dbg_level, 0644);
static char trace_method_name[6];
module_param_string(trace_method_name, trace_method_name, 6, 0644);
"support\n"));
*cap |= ACPI_VIDEO_BACKLIGHT;
if (ACPI_FAILURE(acpi_get_handle(handle, "_BQC", &h_dummy)))
- printk(KERN_WARNING FW_BUG PREFIX "ACPI brightness "
- "control misses _BQC function\n");
+ printk(KERN_WARNING FW_BUG PREFIX "No _BQC method, "
+ "cannot determine initial brightness\n");
/* We have backlight support, no need to scan further */
return AE_CTRL_TERMINATE;
}
{
struct atm_dev *dev;
IADEV *iadev;
- unsigned long flags;
int ret;
iadev = kzalloc(sizeof(*iadev), GFP_KERNEL);
ia_dev[iadev_count] = iadev;
_ia_dev[iadev_count] = dev;
iadev_count++;
- spin_lock_init(&iadev->misc_lock);
- /* First fixes first. I don't want to think about this now. */
- spin_lock_irqsave(&iadev->misc_lock, flags);
if (ia_init(dev) || ia_start(dev)) {
IF_INIT(printk("IA register failed!\n");)
iadev_count--;
ia_dev[iadev_count] = NULL;
_ia_dev[iadev_count] = NULL;
- spin_unlock_irqrestore(&iadev->misc_lock, flags);
ret = -EINVAL;
goto err_out_deregister_dev;
}
- spin_unlock_irqrestore(&iadev->misc_lock, flags);
IF_EVENT(printk("iadev_count = %d\n", iadev_count);)
iadev->next_board = ia_boards;
struct dle_q rx_dle_q;
struct free_desc_q *rx_free_desc_qhead;
struct sk_buff_head rx_dma_q;
- spinlock_t rx_lock, misc_lock;
+ spinlock_t rx_lock;
struct atm_vcc **rx_open; /* list of all open VCs */
u16 num_rx_desc, rx_buf_sz, rxing;
u32 rx_pkt_ram, rx_tmp_cnt;
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
struct solos_card *card = atmdev->dev_data;
struct sk_buff *skb;
+ unsigned int len;
spin_lock(&card->cli_queue_lock);
skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
if(skb == NULL)
return sprintf(buf, "No data.\n");
- memcpy(buf, skb->data, skb->len);
- dev_dbg(&card->dev->dev, "len: %d\n", skb->len);
+ len = skb->len;
+ memcpy(buf, skb->data, len);
+ dev_dbg(&card->dev->dev, "len: %d\n", len);
kfree_skb(skb);
- return skb->len;
+ return len;
}
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
struct virtio_blk *vblk = disk->private_data;
struct request *req;
struct bio *bio;
+ int err;
bio = bio_map_kern(vblk->disk->queue, id_str, VIRTIO_BLK_ID_BYTES,
GFP_KERNEL);
}
req->cmd_type = REQ_TYPE_SPECIAL;
- return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+ err = blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+ blk_put_request(req);
+
+ return err;
}
static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode,
* Limiting Performance Impact
* ---------------------------
* C states, especially those with large exit latencies, can have a real
- * noticable impact on workloads, which is not acceptable for most sysadmins,
+ * noticeable impact on workloads, which is not acceptable for most sysadmins,
* and in addition, less performance has a power price of its own.
*
* As a general rule of thumb, menu assumes that the following heuristic
dma->device_issue_pending = ioat2_issue_pending;
dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
dma->device_free_chan_resources = ioat2_free_chan_resources;
- dma->device_tx_status = ioat_tx_status;
+ dma->device_tx_status = ioat_dma_tx_status;
err = ioat_probe(device);
if (err)
sh_chan = to_sh_chan(chan);
param = chan->private;
- slave_addr = param->config->addr;
/* Someone calling slave DMA on a public channel? */
if (!param || !sg_len) {
return NULL;
}
+ slave_addr = param->config->addr;
+
/*
* if (param != NULL), this is a successfully requested slave channel,
* therefore param->config != NULL too.
ATTR_COUNTER(0),
ATTR_COUNTER(1),
ATTR_COUNTER(2),
+ { .attr = { .name = NULL } }
};
static struct mcidev_sysfs_group i7core_udimm_counters = {
return -ENOMEM;
kref_init(&obj->refcount);
- kref_init(&obj->handlecount);
+ atomic_set(&obj->handle_count, 0);
obj->size = size;
atomic_inc(&dev->object_count);
}
EXPORT_SYMBOL(drm_gem_object_free);
-/**
- * Called after the last reference to the object has been lost.
- * Must be called without holding struct_mutex
- *
- * Frees the object
- */
-void
-drm_gem_object_free_unlocked(struct kref *kref)
-{
- struct drm_gem_object *obj = (struct drm_gem_object *) kref;
- struct drm_device *dev = obj->dev;
-
- if (dev->driver->gem_free_object_unlocked != NULL)
- dev->driver->gem_free_object_unlocked(obj);
- else if (dev->driver->gem_free_object != NULL) {
- mutex_lock(&dev->struct_mutex);
- dev->driver->gem_free_object(obj);
- mutex_unlock(&dev->struct_mutex);
- }
-}
-EXPORT_SYMBOL(drm_gem_object_free_unlocked);
-
static void drm_gem_object_ref_bug(struct kref *list_kref)
{
BUG();
* called before drm_gem_object_free or we'll be touching
* freed memory
*/
-void
-drm_gem_object_handle_free(struct kref *kref)
+void drm_gem_object_handle_free(struct drm_gem_object *obj)
{
- struct drm_gem_object *obj = container_of(kref,
- struct drm_gem_object,
- handlecount);
struct drm_device *dev = obj->dev;
/* Remove any name for this object */
struct drm_gem_object *obj = vma->vm_private_data;
drm_gem_object_reference(obj);
+
+ mutex_lock(&obj->dev->struct_mutex);
+ drm_vm_open_locked(vma);
+ mutex_unlock(&obj->dev->struct_mutex);
}
EXPORT_SYMBOL(drm_gem_vm_open);
{
struct drm_gem_object *obj = vma->vm_private_data;
- drm_gem_object_unreference_unlocked(obj);
+ mutex_lock(&obj->dev->struct_mutex);
+ drm_vm_close_locked(vma);
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&obj->dev->struct_mutex);
}
EXPORT_SYMBOL(drm_gem_vm_close);
seq_printf(m, "%6d %8zd %7d %8d\n",
obj->name, obj->size,
- atomic_read(&obj->handlecount.refcount),
+ atomic_read(&obj->handle_count),
atomic_read(&obj->refcount.refcount));
return 0;
}
mutex_unlock(&dev->struct_mutex);
}
-/**
- * \c close method for all virtual memory types.
- *
- * \param vma virtual memory area.
- *
- * Search the \p vma private data entry in drm_device::vmalist, unlink it, and
- * free it.
- */
-static void drm_vm_close(struct vm_area_struct *vma)
+void drm_vm_close_locked(struct vm_area_struct *vma)
{
struct drm_file *priv = vma->vm_file->private_data;
struct drm_device *dev = priv->minor->dev;
vma->vm_start, vma->vm_end - vma->vm_start);
atomic_dec(&dev->vma_count);
- mutex_lock(&dev->struct_mutex);
list_for_each_entry_safe(pt, temp, &dev->vmalist, head) {
if (pt->vma == vma) {
list_del(&pt->head);
break;
}
}
+}
+
+/**
+ * \c close method for all virtual memory types.
+ *
+ * \param vma virtual memory area.
+ *
+ * Search the \p vma private data entry in drm_device::vmalist, unlink it, and
+ * free it.
+ */
+static void drm_vm_close(struct vm_area_struct *vma)
+{
+ struct drm_file *priv = vma->vm_file->private_data;
+ struct drm_device *dev = priv->minor->dev;
+
+ mutex_lock(&dev->struct_mutex);
+ drm_vm_close_locked(vma);
mutex_unlock(&dev->struct_mutex);
}
static const struct file_operations i810_buffer_fops = {
.open = drm_open,
.release = drm_release,
- .unlocked_ioctl = drm_ioctl,
+ .unlocked_ioctl = i810_ioctl,
.mmap = i810_mmap_buffers,
.fasync = drm_fasync,
};
static const struct file_operations i830_buffer_fops = {
.open = drm_open,
.release = drm_release,
- .unlocked_ioctl = drm_ioctl,
+ .unlocked_ioctl = i830_ioctl,
.mmap = i830_mmap_buffers,
.fasync = drm_fasync,
};
}
}
- div_u64(diff, diff1);
+ diff = div_u64(diff, diff1);
ret = ((m * diff) + c);
- div_u64(ret, 10);
+ ret = div_u64(ret, 10);
dev_priv->last_count1 = total_count;
dev_priv->last_time1 = now;
/* More magic constants... */
diff = diff * 1181;
- div_u64(diff, diffms * 10);
+ diff = div_u64(diff, diffms * 10);
dev_priv->gfx_power = diff;
}
dev_priv->mchdev_lock = &mchdev_lock;
spin_unlock(&mchdev_lock);
+ /* XXX Prevent module unload due to memory corruption bugs. */
+ __module_get(THIS_MODULE);
+
return 0;
out_workqueue_free:
return -ENOMEM;
ret = drm_gem_handle_create(file_priv, obj, &handle);
+ /* drop reference from allocate - handle holds it now */
+ drm_gem_object_unreference_unlocked(obj);
if (ret) {
- drm_gem_object_unreference_unlocked(obj);
return ret;
}
- /* Sink the floating reference from kref_init(handlecount) */
- drm_gem_object_handle_unreference_unlocked(obj);
-
args->handle = handle;
return 0;
}
return -ENOENT;
obj_priv = to_intel_bo(obj);
- /* Bounds check source.
- *
- * XXX: This could use review for overflow issues...
- */
- if (args->offset > obj->size || args->size > obj->size ||
- args->offset + args->size > obj->size) {
- drm_gem_object_unreference_unlocked(obj);
- return -EINVAL;
+ /* Bounds check source. */
+ if (args->offset > obj->size || args->size > obj->size - args->offset) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (!access_ok(VERIFY_WRITE,
+ (char __user *)(uintptr_t)args->data_ptr,
+ args->size)) {
+ ret = -EFAULT;
+ goto err;
}
if (i915_gem_object_needs_bit17_swizzle(obj)) {
file_priv);
}
+err:
drm_gem_object_unreference_unlocked(obj);
-
return ret;
}
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
- if (!access_ok(VERIFY_READ, user_data, remain))
- return -EFAULT;
mutex_lock(&dev->struct_mutex);
return -ENOENT;
obj_priv = to_intel_bo(obj);
- /* Bounds check destination.
- *
- * XXX: This could use review for overflow issues...
- */
- if (args->offset > obj->size || args->size > obj->size ||
- args->offset + args->size > obj->size) {
- drm_gem_object_unreference_unlocked(obj);
- return -EINVAL;
+ /* Bounds check destination. */
+ if (args->offset > obj->size || args->size > obj->size - args->offset) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (!access_ok(VERIFY_READ,
+ (char __user *)(uintptr_t)args->data_ptr,
+ args->size)) {
+ ret = -EFAULT;
+ goto err;
}
/* We can only do the GTT pwrite on untiled buffers, as otherwise
DRM_INFO("pwrite failed %d\n", ret);
#endif
+err:
drm_gem_object_unreference_unlocked(obj);
-
return ret;
}
(int) reloc->offset,
reloc->read_domains,
reloc->write_domain);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
return -EINVAL;
}
if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct list_head eviction_list, unwind_list;
- struct drm_i915_gem_object *obj_priv, *tmp_obj_priv;
+ struct drm_i915_gem_object *obj_priv;
struct list_head *render_iter, *bsd_iter;
int ret = 0;
return -ENOSPC;
found:
+ /* drm_mm doesn't allow any other other operations while
+ * scanning, therefore store to be evicted objects on a
+ * temporary list. */
INIT_LIST_HEAD(&eviction_list);
- list_for_each_entry_safe(obj_priv, tmp_obj_priv,
- &unwind_list, evict_list) {
+ while (!list_empty(&unwind_list)) {
+ obj_priv = list_first_entry(&unwind_list,
+ struct drm_i915_gem_object,
+ evict_list);
if (drm_mm_scan_remove_block(obj_priv->gtt_space)) {
- /* drm_mm doesn't allow any other other operations while
- * scanning, therefore store to be evicted objects on a
- * temporary list. */
list_move(&obj_priv->evict_list, &eviction_list);
- } else
- drm_gem_object_unreference(&obj_priv->base);
+ continue;
+ }
+ list_del(&obj_priv->evict_list);
+ drm_gem_object_unreference(&obj_priv->base);
}
/* Unbinding will emit any required flushes */
- list_for_each_entry_safe(obj_priv, tmp_obj_priv,
- &eviction_list, evict_list) {
-#if WATCH_LRU
- DRM_INFO("%s: evicting %p\n", __func__, &obj_priv->base);
-#endif
- ret = i915_gem_object_unbind(&obj_priv->base);
- if (ret)
- return ret;
-
+ while (!list_empty(&eviction_list)) {
+ obj_priv = list_first_entry(&eviction_list,
+ struct drm_i915_gem_object,
+ evict_list);
+ if (ret == 0)
+ ret = i915_gem_object_unbind(&obj_priv->base);
+ list_del(&obj_priv->evict_list);
drm_gem_object_unreference(&obj_priv->base);
}
- /* The just created free hole should be on the top of the free stack
- * maintained by drm_mm, so this BUG_ON actually executes in O(1).
- * Furthermore all accessed data has just recently been used, so it
- * should be really fast, too. */
- BUG_ON(!drm_mm_search_free(&dev_priv->mm.gtt_space, min_size,
- alignment, 0));
-
- return 0;
+ return ret;
}
int
DRM_DEBUG_KMS("vblank wait timed out\n");
}
-/**
- * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
+/*
+ * intel_wait_for_pipe_off - wait for pipe to turn off
* @dev: drm device
* @pipe: pipe to wait for
*
* spinning on the vblank interrupt status bit, since we won't actually
* see an interrupt when the pipe is disabled.
*
- * So this function waits for the display line value to settle (it
- * usually ends up stopping at the start of the next frame).
+ * On Gen4 and above:
+ * wait for the pipe register state bit to turn off
+ *
+ * Otherwise:
+ * wait for the display line value to settle (it usually
+ * ends up stopping at the start of the next frame).
+ *
*/
-void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
+static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
- unsigned long timeout = jiffies + msecs_to_jiffies(100);
- u32 last_line;
-
- /* Wait for the display line to settle */
- do {
- last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
- mdelay(5);
- } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
- time_after(timeout, jiffies));
-
- if (time_after(jiffies, timeout))
- DRM_DEBUG_KMS("vblank wait timed out\n");
+
+ if (INTEL_INFO(dev)->gen >= 4) {
+ int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF);
+
+ /* Wait for the Pipe State to go off */
+ if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0,
+ 100, 0))
+ DRM_DEBUG_KMS("pipe_off wait timed out\n");
+ } else {
+ u32 last_line;
+ int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+ /* Wait for the display line to settle */
+ do {
+ last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
+ mdelay(5);
+ } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
+ time_after(timeout, jiffies));
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("pipe_off wait timed out\n");
+ }
}
/* Parameters have changed, update FBC info */
I915_READ(dspbase_reg);
}
- /* Wait for vblank for the disable to take effect */
- intel_wait_for_vblank_off(dev, pipe);
-
/* Don't disable pipe A or pipe A PLLs if needed */
if (pipeconf_reg == PIPEACONF &&
- (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ (dev_priv->quirks & QUIRK_PIPEA_FORCE)) {
+ /* Wait for vblank for the disable to take effect */
+ intel_wait_for_vblank(dev, pipe);
goto skip_pipe_off;
+ }
/* Next, disable display pipes */
temp = I915_READ(pipeconf_reg);
I915_READ(pipeconf_reg);
}
- /* Wait for vblank for the disable to take effect. */
- intel_wait_for_vblank_off(dev, pipe);
+ /* Wait for the pipe to turn off */
+ intel_wait_for_pipe_off(dev, pipe);
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) != 0) {
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
uint8_t dp_train_pat,
- uint8_t train_set[4],
- bool first)
+ uint8_t train_set[4])
{
struct drm_device *dev = intel_dp->base.enc.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
int ret;
I915_WRITE(intel_dp->output_reg, dp_reg_value);
POSTING_READ(intel_dp->output_reg);
- if (first)
- intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_dp_aux_native_write_1(intel_dp,
DP_TRAINING_PATTERN_SET,
uint8_t voltage;
bool clock_recovery = false;
bool channel_eq = false;
- bool first = true;
int tries;
u32 reg;
uint32_t DP = intel_dp->DP;
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
+
+ /* Enable output, wait for it to become active */
+ I915_WRITE(intel_dp->output_reg, intel_dp->DP);
+ POSTING_READ(intel_dp->output_reg);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
/* Write the link configuration data */
intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
reg = DP | DP_LINK_TRAIN_PAT_1;
if (!intel_dp_set_link_train(intel_dp, reg,
- DP_TRAINING_PATTERN_1, train_set, first))
+ DP_TRAINING_PATTERN_1, train_set))
break;
- first = false;
/* Set training pattern 1 */
udelay(100);
/* channel eq pattern */
if (!intel_dp_set_link_train(intel_dp, reg,
- DP_TRAINING_PATTERN_2, train_set,
- false))
+ DP_TRAINING_PATTERN_2, train_set))
break;
udelay(400);
struct drm_crtc *crtc);
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern void intel_wait_for_vblank_off(struct drm_device *dev, int pipe);
extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
drm_fb_helper_fini(&ifbdev->helper);
drm_framebuffer_cleanup(&ifb->base);
- if (ifb->obj)
+ if (ifb->obj) {
drm_gem_object_unreference(ifb->obj);
+ ifb->obj = NULL;
+ }
return 0;
}
goto out;
ret = drm_gem_handle_create(file_priv, nvbo->gem, &req->info.handle);
+ /* drop reference from allocate - handle holds it now */
+ drm_gem_object_unreference_unlocked(nvbo->gem);
out:
- drm_gem_object_handle_unreference_unlocked(nvbo->gem);
-
- if (ret)
- drm_gem_object_unreference_unlocked(nvbo->gem);
return ret;
}
WREG32(RCU_IND_INDEX, 0x203);
efuse_straps_3 = RREG32(RCU_IND_DATA);
- efuse_box_bit_127_124 = (u8)(efuse_straps_3 & 0xF0000000) >> 28;
+ efuse_box_bit_127_124 = (u8)((efuse_straps_3 & 0xF0000000) >> 28);
switch(efuse_box_bit_127_124) {
case 0x0:
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
{
u32 tmp;
- WREG32(CP_INT_CNTL, 0);
+ WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
WREG32(GRBM_INT_CNTL, 0);
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
return r;
}
rdev->cp.ready = true;
+ rdev->mc.active_vram_size = rdev->mc.real_vram_size;
return 0;
}
void r100_cp_disable(struct radeon_device *rdev)
{
/* Disable ring */
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
rdev->cp.ready = false;
WREG32(RADEON_CP_CSQ_MODE, 0);
WREG32(RADEON_CP_CSQ_CNTL, 0);
/* FIXME we don't use the second aperture yet when we could use it */
if (rdev->mc.visible_vram_size > rdev->mc.aper_size)
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
if (rdev->flags & RADEON_IS_IGP) {
uint32_t tom;
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
if (rdev->flags & RADEON_IS_IGP) {
*/
void r600_cp_stop(struct radeon_device *rdev)
{
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1));
}
{
u32 tmp;
- WREG32(CP_INT_CNTL, 0);
+ WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
WREG32(GRBM_INT_CNTL, 0);
WREG32(DxMODE_INT_MASK, 0);
if (ASIC_IS_DCE3(rdev)) {
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
* rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
*/
- if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+ if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
+ rdev->vram_scratch.ptr) {
void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp;
memcpy(ptr + rdev->r600_blit.ps_offset, r6xx_ps, r6xx_ps_size * 4);
radeon_bo_kunmap(rdev->r600_blit.shader_obj);
radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ rdev->mc.active_vram_size = rdev->mc.real_vram_size;
return 0;
}
{
int r;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
if (rdev->r600_blit.shader_obj == NULL)
return;
/* If we can't reserve the bo, unref should be enough to destroy
* about vram size near mc fb location */
u64 mc_vram_size;
u64 visible_vram_size;
+ u64 active_vram_size;
u64 gtt_size;
u64 gtt_start;
u64 gtt_end;
*connector_type = DRM_MODE_CONNECTOR_DVID;
}
+ /* MSI K9A2GM V2/V3 board has no HDMI or DVI */
+ if ((dev->pdev->device == 0x796e) &&
+ (dev->pdev->subsystem_vendor == 0x1462) &&
+ (dev->pdev->subsystem_device == 0x7302)) {
+ if ((supported_device == ATOM_DEVICE_DFP2_SUPPORT) ||
+ (supported_device == ATOM_DEVICE_DFP3_SUPPORT))
+ return false;
+ }
+
/* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */
if ((dev->pdev->device == 0x7941) &&
(dev->pdev->subsystem_vendor == 0x147b) &&
switch (tv_info->ucTV_BootUpDefaultStandard) {
case ATOM_TV_NTSC:
tv_std = TV_STD_NTSC;
- DRM_INFO("Default TV standard: NTSC\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC\n");
break;
case ATOM_TV_NTSCJ:
tv_std = TV_STD_NTSC_J;
- DRM_INFO("Default TV standard: NTSC-J\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
break;
case ATOM_TV_PAL:
tv_std = TV_STD_PAL;
- DRM_INFO("Default TV standard: PAL\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL\n");
break;
case ATOM_TV_PALM:
tv_std = TV_STD_PAL_M;
- DRM_INFO("Default TV standard: PAL-M\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
break;
case ATOM_TV_PALN:
tv_std = TV_STD_PAL_N;
- DRM_INFO("Default TV standard: PAL-N\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-N\n");
break;
case ATOM_TV_PALCN:
tv_std = TV_STD_PAL_CN;
- DRM_INFO("Default TV standard: PAL-CN\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-CN\n");
break;
case ATOM_TV_PAL60:
tv_std = TV_STD_PAL_60;
- DRM_INFO("Default TV standard: PAL-60\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
break;
case ATOM_TV_SECAM:
tv_std = TV_STD_SECAM;
- DRM_INFO("Default TV standard: SECAM\n");
+ DRM_DEBUG_KMS("Default TV standard: SECAM\n");
break;
default:
tv_std = TV_STD_NTSC;
- DRM_INFO("Unknown TV standard; defaulting to NTSC\n");
+ DRM_DEBUG_KMS("Unknown TV standard; defaulting to NTSC\n");
break;
}
}
switch (RBIOS8(tv_info + 7) & 0xf) {
case 1:
tv_std = TV_STD_NTSC;
- DRM_INFO("Default TV standard: NTSC\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC\n");
break;
case 2:
tv_std = TV_STD_PAL;
- DRM_INFO("Default TV standard: PAL\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL\n");
break;
case 3:
tv_std = TV_STD_PAL_M;
- DRM_INFO("Default TV standard: PAL-M\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
break;
case 4:
tv_std = TV_STD_PAL_60;
- DRM_INFO("Default TV standard: PAL-60\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
break;
case 5:
tv_std = TV_STD_NTSC_J;
- DRM_INFO("Default TV standard: NTSC-J\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
break;
case 6:
tv_std = TV_STD_SCART_PAL;
- DRM_INFO("Default TV standard: SCART-PAL\n");
+ DRM_DEBUG_KMS("Default TV standard: SCART-PAL\n");
break;
default:
tv_std = TV_STD_NTSC;
- DRM_INFO
+ DRM_DEBUG_KMS
("Unknown TV standard; defaulting to NTSC\n");
break;
}
switch ((RBIOS8(tv_info + 9) >> 2) & 0x3) {
case 0:
- DRM_INFO("29.498928713 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("29.498928713 MHz TV ref clk\n");
break;
case 1:
- DRM_INFO("28.636360000 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("28.636360000 MHz TV ref clk\n");
break;
case 2:
- DRM_INFO("14.318180000 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("14.318180000 MHz TV ref clk\n");
break;
case 3:
- DRM_INFO("27.000000000 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("27.000000000 MHz TV ref clk\n");
break;
default:
break;
if (tmds_info) {
ver = RBIOS8(tmds_info);
- DRM_INFO("DFP table revision: %d\n", ver);
+ DRM_DEBUG_KMS("DFP table revision: %d\n", ver);
if (ver == 3) {
n = RBIOS8(tmds_info + 5) + 1;
if (n > 4)
offset = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
if (offset) {
ver = RBIOS8(offset);
- DRM_INFO("External TMDS Table revision: %d\n", ver);
+ DRM_DEBUG_KMS("External TMDS Table revision: %d\n", ver);
tmds->slave_addr = RBIOS8(offset + 4 + 2);
tmds->slave_addr >>= 1; /* 7 bit addressing */
gpio = RBIOS8(offset + 4 + 3);
DRM_INFO(" DFP4: %s\n", encoder_names[radeon_encoder->encoder_id]);
if (devices & ATOM_DEVICE_DFP5_SUPPORT)
DRM_INFO(" DFP5: %s\n", encoder_names[radeon_encoder->encoder_id]);
+ if (devices & ATOM_DEVICE_DFP6_SUPPORT)
+ DRM_INFO(" DFP6: %s\n", encoder_names[radeon_encoder->encoder_id]);
if (devices & ATOM_DEVICE_TV1_SUPPORT)
DRM_INFO(" TV1: %s\n", encoder_names[radeon_encoder->encoder_id]);
if (devices & ATOM_DEVICE_CV_SUPPORT)
{
struct radeon_framebuffer *radeon_fb = to_radeon_framebuffer(fb);
- if (radeon_fb->obj)
+ if (radeon_fb->obj) {
drm_gem_object_unreference_unlocked(radeon_fb->obj);
+ }
drm_framebuffer_cleanup(fb);
kfree(radeon_fb);
}
ret = radeon_bo_reserve(rbo, false);
if (likely(ret == 0)) {
radeon_bo_kunmap(rbo);
+ radeon_bo_unpin(rbo);
radeon_bo_unreserve(rbo);
}
drm_gem_object_unreference_unlocked(gobj);
{
struct fb_info *info;
struct radeon_framebuffer *rfb = &rfbdev->rfb;
- struct radeon_bo *rbo;
- int r;
if (rfbdev->helper.fbdev) {
info = rfbdev->helper.fbdev;
}
if (rfb->obj) {
- rbo = rfb->obj->driver_private;
- r = radeon_bo_reserve(rbo, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rbo);
- radeon_bo_unpin(rbo);
- radeon_bo_unreserve(rbo);
- }
- drm_gem_object_unreference_unlocked(rfb->obj);
+ radeonfb_destroy_pinned_object(rfb->obj);
+ rfb->obj = NULL;
}
drm_fb_helper_fini(&rfbdev->helper);
drm_framebuffer_cleanup(&rfb->base);
return r;
}
r = drm_gem_handle_create(filp, gobj, &handle);
+ /* drop reference from allocate - handle holds it now */
+ drm_gem_object_unreference_unlocked(gobj);
if (r) {
- drm_gem_object_unreference_unlocked(gobj);
return r;
}
- drm_gem_object_handle_unreference_unlocked(gobj);
args->handle = handle;
return 0;
}
u32 c = 0;
rbo->placement.fpfn = 0;
- rbo->placement.lpfn = 0;
+ rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
rbo->placement.placement = rbo->placements;
rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)
int r;
r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
- if (unlikely(r != 0)) {
- if (r != -ERESTARTSYS)
- dev_err(bo->rdev->dev, "%p reserve failed for wait\n", bo);
+ if (unlikely(r != 0))
return r;
- }
spin_lock(&bo->tbo.lock);
if (mem_type)
*mem_type = bo->tbo.mem.mem_type;
rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
base = RREG32_MC(R_000004_MC_FB_LOCATION);
base = G_000004_MC_FB_START(base) << 16;
rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
base = RREG32_MC(R_000100_MCCFG_FB_LOCATION);
base = G_000100_MC_FB_START(base) << 16;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
*/
void r700_cp_stop(struct radeon_device *rdev)
{
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
WREG32(CP_ME_CNTL, (CP_ME_HALT | CP_PFP_HALT));
}
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
return ret;
}
+/**
+ * Call bo::reserved and with the lru lock held.
+ * Will release GPU memory type usage on destruction.
+ * This is the place to put in driver specific hooks.
+ * Will release the bo::reserved lock and the
+ * lru lock on exit.
+ */
+
+static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
+{
+ struct ttm_bo_global *glob = bo->glob;
+
+ if (bo->ttm) {
+
+ /**
+ * Release the lru_lock, since we don't want to have
+ * an atomic requirement on ttm_tt[unbind|destroy].
+ */
+
+ spin_unlock(&glob->lru_lock);
+ ttm_tt_unbind(bo->ttm);
+ ttm_tt_destroy(bo->ttm);
+ bo->ttm = NULL;
+ spin_lock(&glob->lru_lock);
+ }
+
+ if (bo->mem.mm_node) {
+ drm_mm_put_block(bo->mem.mm_node);
+ bo->mem.mm_node = NULL;
+ }
+
+ atomic_set(&bo->reserved, 0);
+ wake_up_all(&bo->event_queue);
+ spin_unlock(&glob->lru_lock);
+}
+
+
/**
* If bo idle, remove from delayed- and lru lists, and unref.
* If not idle, and already on delayed list, do nothing.
int ret;
spin_lock(&bo->lock);
+retry:
(void) ttm_bo_wait(bo, false, false, !remove_all);
if (!bo->sync_obj) {
spin_unlock(&bo->lock);
spin_lock(&glob->lru_lock);
- put_count = ttm_bo_del_from_lru(bo);
+ ret = ttm_bo_reserve_locked(bo, false, !remove_all, false, 0);
+
+ /**
+ * Someone else has the object reserved. Bail and retry.
+ */
- ret = ttm_bo_reserve_locked(bo, false, false, false, 0);
- BUG_ON(ret);
- if (bo->ttm)
- ttm_tt_unbind(bo->ttm);
+ if (unlikely(ret == -EBUSY)) {
+ spin_unlock(&glob->lru_lock);
+ spin_lock(&bo->lock);
+ goto requeue;
+ }
+
+ /**
+ * We can re-check for sync object without taking
+ * the bo::lock since setting the sync object requires
+ * also bo::reserved. A busy object at this point may
+ * be caused by another thread starting an accelerated
+ * eviction.
+ */
+
+ if (unlikely(bo->sync_obj)) {
+ atomic_set(&bo->reserved, 0);
+ wake_up_all(&bo->event_queue);
+ spin_unlock(&glob->lru_lock);
+ spin_lock(&bo->lock);
+ if (remove_all)
+ goto retry;
+ else
+ goto requeue;
+ }
+
+ put_count = ttm_bo_del_from_lru(bo);
if (!list_empty(&bo->ddestroy)) {
list_del_init(&bo->ddestroy);
++put_count;
}
- if (bo->mem.mm_node) {
- drm_mm_put_block(bo->mem.mm_node);
- bo->mem.mm_node = NULL;
- }
- spin_unlock(&glob->lru_lock);
- atomic_set(&bo->reserved, 0);
+ ttm_bo_cleanup_memtype_use(bo);
while (put_count--)
kref_put(&bo->list_kref, ttm_bo_ref_bug);
return 0;
}
-
+requeue:
spin_lock(&glob->lru_lock);
if (list_empty(&bo->ddestroy)) {
void *sync_obj = bo->sync_obj;
{0, 0, 0}
};
-static char *vmw_devname = "vmwgfx";
+static int enable_fbdev;
static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
static void vmw_master_init(struct vmw_master *);
static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
void *ptr);
+MODULE_PARM_DESC(enable_fbdev, "Enable vmwgfx fbdev");
+module_param_named(enable_fbdev, enable_fbdev, int, 0600);
+
static void vmw_print_capabilities(uint32_t capabilities)
{
DRM_INFO("Capabilities:\n");
{
int ret;
- vmw_kms_save_vga(dev_priv);
-
ret = vmw_fifo_init(dev_priv, &dev_priv->fifo);
if (unlikely(ret != 0)) {
DRM_ERROR("Unable to initialize FIFO.\n");
static void vmw_release_device(struct vmw_private *dev_priv)
{
vmw_fifo_release(dev_priv, &dev_priv->fifo);
- vmw_kms_restore_vga(dev_priv);
}
+int vmw_3d_resource_inc(struct vmw_private *dev_priv)
+{
+ int ret = 0;
+
+ mutex_lock(&dev_priv->release_mutex);
+ if (unlikely(dev_priv->num_3d_resources++ == 0)) {
+ ret = vmw_request_device(dev_priv);
+ if (unlikely(ret != 0))
+ --dev_priv->num_3d_resources;
+ }
+ mutex_unlock(&dev_priv->release_mutex);
+ return ret;
+}
+
+
+void vmw_3d_resource_dec(struct vmw_private *dev_priv)
+{
+ int32_t n3d;
+
+ mutex_lock(&dev_priv->release_mutex);
+ if (unlikely(--dev_priv->num_3d_resources == 0))
+ vmw_release_device(dev_priv);
+ n3d = (int32_t) dev_priv->num_3d_resources;
+ mutex_unlock(&dev_priv->release_mutex);
+
+ BUG_ON(n3d < 0);
+}
static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
{
dev_priv->last_read_sequence = (uint32_t) -100;
mutex_init(&dev_priv->hw_mutex);
mutex_init(&dev_priv->cmdbuf_mutex);
+ mutex_init(&dev_priv->release_mutex);
rwlock_init(&dev_priv->resource_lock);
idr_init(&dev_priv->context_idr);
idr_init(&dev_priv->surface_idr);
dev_priv->vram_start = pci_resource_start(dev->pdev, 1);
dev_priv->mmio_start = pci_resource_start(dev->pdev, 2);
+ dev_priv->enable_fb = enable_fbdev;
+
mutex_lock(&dev_priv->hw_mutex);
vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
dev->dev_private = dev_priv;
- if (!dev->devname)
- dev->devname = vmw_devname;
-
- if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
- ret = drm_irq_install(dev);
- if (unlikely(ret != 0)) {
- DRM_ERROR("Failed installing irq: %d\n", ret);
- goto out_no_irq;
- }
- }
-
ret = pci_request_regions(dev->pdev, "vmwgfx probe");
dev_priv->stealth = (ret != 0);
if (dev_priv->stealth) {
goto out_no_device;
}
}
- ret = vmw_request_device(dev_priv);
+ ret = vmw_kms_init(dev_priv);
if (unlikely(ret != 0))
- goto out_no_device;
- vmw_kms_init(dev_priv);
+ goto out_no_kms;
vmw_overlay_init(dev_priv);
- vmw_fb_init(dev_priv);
+ if (dev_priv->enable_fb) {
+ ret = vmw_3d_resource_inc(dev_priv);
+ if (unlikely(ret != 0))
+ goto out_no_fifo;
+ vmw_kms_save_vga(dev_priv);
+ vmw_fb_init(dev_priv);
+ DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ?
+ "Detected device 3D availability.\n" :
+ "Detected no device 3D availability.\n");
+ } else {
+ DRM_INFO("Delayed 3D detection since we're not "
+ "running the device in SVGA mode yet.\n");
+ }
+
+ if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
+ ret = drm_irq_install(dev);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Failed installing irq: %d\n", ret);
+ goto out_no_irq;
+ }
+ }
dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
register_pm_notifier(&dev_priv->pm_nb);
- DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n");
-
return 0;
-out_no_device:
- if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
- drm_irq_uninstall(dev_priv->dev);
- if (dev->devname == vmw_devname)
- dev->devname = NULL;
out_no_irq:
+ if (dev_priv->enable_fb) {
+ vmw_fb_close(dev_priv);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
+out_no_fifo:
+ vmw_overlay_close(dev_priv);
+ vmw_kms_close(dev_priv);
+out_no_kms:
+ if (dev_priv->stealth)
+ pci_release_region(dev->pdev, 2);
+ else
+ pci_release_regions(dev->pdev);
+out_no_device:
ttm_object_device_release(&dev_priv->tdev);
out_err4:
iounmap(dev_priv->mmio_virt);
unregister_pm_notifier(&dev_priv->pm_nb);
- vmw_fb_close(dev_priv);
+ if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
+ drm_irq_uninstall(dev_priv->dev);
+ if (dev_priv->enable_fb) {
+ vmw_fb_close(dev_priv);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
vmw_kms_close(dev_priv);
vmw_overlay_close(dev_priv);
- vmw_release_device(dev_priv);
if (dev_priv->stealth)
pci_release_region(dev->pdev, 2);
else
pci_release_regions(dev->pdev);
- if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
- drm_irq_uninstall(dev_priv->dev);
- if (dev->devname == vmw_devname)
- dev->devname = NULL;
ttm_object_device_release(&dev_priv->tdev);
iounmap(dev_priv->mmio_virt);
drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start,
struct drm_ioctl_desc *ioctl =
&vmw_ioctls[nr - DRM_COMMAND_BASE];
- if (unlikely(ioctl->cmd != cmd)) {
+ if (unlikely(ioctl->cmd_drv != cmd)) {
DRM_ERROR("Invalid command format, ioctl %d\n",
nr - DRM_COMMAND_BASE);
return -EINVAL;
struct vmw_master *vmaster = vmw_master(file_priv->master);
int ret = 0;
+ if (!dev_priv->enable_fb) {
+ ret = vmw_3d_resource_inc(dev_priv);
+ if (unlikely(ret != 0))
+ return ret;
+ vmw_kms_save_vga(dev_priv);
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_TRACES, 0);
+ mutex_unlock(&dev_priv->hw_mutex);
+ }
+
if (active) {
BUG_ON(active != &dev_priv->fbdev_master);
ret = ttm_vt_lock(&active->lock, false, vmw_fp->tfile);
return 0;
out_no_active_lock:
- vmw_release_device(dev_priv);
+ if (!dev_priv->enable_fb) {
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_TRACES, 1);
+ mutex_unlock(&dev_priv->hw_mutex);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
return ret;
}
ttm_lock_set_kill(&vmaster->lock, true, SIGTERM);
+ if (!dev_priv->enable_fb) {
+ ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM);
+ if (unlikely(ret != 0))
+ DRM_ERROR("Unable to clean VRAM on master drop.\n");
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_TRACES, 1);
+ mutex_unlock(&dev_priv->hw_mutex);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
+
dev_priv->active_master = &dev_priv->fbdev_master;
ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM);
ttm_vt_unlock(&dev_priv->fbdev_master.lock);
- vmw_fb_on(dev_priv);
+ if (dev_priv->enable_fb)
+ vmw_fb_on(dev_priv);
}
.irq_postinstall = vmw_irq_postinstall,
.irq_uninstall = vmw_irq_uninstall,
.irq_handler = vmw_irq_handler,
+ .get_vblank_counter = vmw_get_vblank_counter,
.reclaim_buffers_locked = NULL,
.get_map_ofs = drm_core_get_map_ofs,
.get_reg_ofs = drm_core_get_reg_ofs,
bool stealth;
bool is_opened;
+ bool enable_fb;
/**
* Master management.
struct vmw_master *active_master;
struct vmw_master fbdev_master;
struct notifier_block pm_nb;
+
+ struct mutex release_mutex;
+ uint32_t num_3d_resources;
};
static inline struct vmw_private *vmw_priv(struct drm_device *dev)
return val;
}
+int vmw_3d_resource_inc(struct vmw_private *dev_priv);
+void vmw_3d_resource_dec(struct vmw_private *dev_priv);
+
/**
* GMR utilities - vmwgfx_gmr.c
*/
unsigned bbp, unsigned depth);
int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc);
/**
* Overlay control - vmwgfx_overlay.c
if (unlikely(ret != 0))
goto err_unlock;
+ if (bo->mem.mem_type == TTM_PL_VRAM &&
+ bo->mem.mm_node->start < bo->num_pages)
+ (void) ttm_bo_validate(bo, &vmw_sys_placement, false,
+ false, false);
+
ret = ttm_bo_validate(bo, &ne_placement, false, false, false);
/* Could probably bug on */
mutex_lock(&dev_priv->hw_mutex);
dev_priv->enable_state = vmw_read(dev_priv, SVGA_REG_ENABLE);
dev_priv->config_done_state = vmw_read(dev_priv, SVGA_REG_CONFIG_DONE);
+ dev_priv->traces_state = vmw_read(dev_priv, SVGA_REG_TRACES);
vmw_write(dev_priv, SVGA_REG_ENABLE, 1);
min = 4;
dev_priv->config_done_state);
vmw_write(dev_priv, SVGA_REG_ENABLE,
dev_priv->enable_state);
+ vmw_write(dev_priv, SVGA_REG_TRACES,
+ dev_priv->traces_state);
mutex_unlock(&dev_priv->hw_mutex);
vmw_fence_queue_takedown(&fifo->fence_queue);
save->width = vmw_read(vmw_priv, SVGA_REG_DISPLAY_WIDTH);
save->height = vmw_read(vmw_priv, SVGA_REG_DISPLAY_HEIGHT);
vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+ if (i == 0 && vmw_priv->num_displays == 1 &&
+ save->width == 0 && save->height == 0) {
+
+ /*
+ * It should be fairly safe to assume that these
+ * values are uninitialized.
+ */
+
+ save->width = vmw_priv->vga_width - save->pos_x;
+ save->height = vmw_priv->vga_height - save->pos_y;
+ }
}
+
return 0;
}
ttm_read_unlock(&vmaster->lock);
return ret;
}
+
+u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc)
+{
+ return 0;
+}
#include "vmwgfx_kms.h"
+#define VMWGFX_LDU_NUM_DU 8
+
#define vmw_crtc_to_ldu(x) \
container_of(x, struct vmw_legacy_display_unit, base.crtc)
#define vmw_encoder_to_ldu(x) \
int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
{
+ struct drm_device *dev = dev_priv->dev;
+ int i;
+ int ret;
+
if (dev_priv->ldu_priv) {
DRM_INFO("ldu system already on\n");
return -EINVAL;
drm_mode_create_dirty_info_property(dev_priv->dev);
- vmw_ldu_init(dev_priv, 0);
- /* for old hardware without multimon only enable one display */
if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
- vmw_ldu_init(dev_priv, 1);
- vmw_ldu_init(dev_priv, 2);
- vmw_ldu_init(dev_priv, 3);
- vmw_ldu_init(dev_priv, 4);
- vmw_ldu_init(dev_priv, 5);
- vmw_ldu_init(dev_priv, 6);
- vmw_ldu_init(dev_priv, 7);
+ for (i = 0; i < VMWGFX_LDU_NUM_DU; ++i)
+ vmw_ldu_init(dev_priv, i);
+ ret = drm_vblank_init(dev, VMWGFX_LDU_NUM_DU);
+ } else {
+ /* for old hardware without multimon only enable one display */
+ vmw_ldu_init(dev_priv, 0);
+ ret = drm_vblank_init(dev, 1);
}
- return 0;
+ return ret;
}
int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv)
{
+ struct drm_device *dev = dev_priv->dev;
+
+ drm_vblank_cleanup(dev);
if (!dev_priv->ldu_priv)
return -ENOSYS;
cmd->body.cid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
+ vmw_3d_resource_dec(dev_priv);
}
static int vmw_context_init(struct vmw_private *dev_priv,
cmd->body.cid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
+ (void) vmw_3d_resource_inc(dev_priv);
vmw_resource_activate(res, vmw_hw_context_destroy);
return 0;
}
cmd->body.sid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
+ vmw_3d_resource_dec(dev_priv);
}
void vmw_surface_res_free(struct vmw_resource *res)
}
vmw_fifo_commit(dev_priv, submit_size);
+ (void) vmw_3d_resource_inc(dev_priv);
vmw_resource_activate(res, vmw_hw_surface_destroy);
return 0;
}
/* Super-I/O Function prototypes */
static inline int superio_inb(int base, int reg);
static inline int superio_inw(int base, int reg);
-static inline void superio_enter(int base);
+static inline int superio_enter(int base);
static inline void superio_select(int base, int ld);
static inline void superio_exit(int base);
return val;
}
-static inline void superio_enter(int base)
+static inline int superio_enter(int base)
{
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_muxed_region(base, 2, DRVNAME)) {
+ printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+ base);
+ return -EBUSY;
+ }
+
/* according to the datasheet the key must be send twice! */
outb(SIO_UNLOCK_KEY, base);
outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
}
static inline void superio_select(int base, int ld)
static inline void superio_exit(int base)
{
outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
}
static inline int fan_from_reg(u16 reg)
static int __init f71882fg_find(int sioaddr, unsigned short *address,
struct f71882fg_sio_data *sio_data)
{
- int err = -ENODEV;
u16 devid;
-
- /* Don't step on other drivers' I/O space by accident */
- if (!request_region(sioaddr, 2, DRVNAME)) {
- printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
- (int)sioaddr);
- return -EBUSY;
- }
-
- superio_enter(sioaddr);
+ int err = superio_enter(sioaddr);
+ if (err)
+ return err;
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
pr_debug(DRVNAME ": Not a Fintek device\n");
+ err = -ENODEV;
goto exit;
}
default:
printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
(unsigned int)devid);
+ err = -ENODEV;
goto exit;
}
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
printk(KERN_WARNING DRVNAME ": Device not activated\n");
+ err = -ENODEV;
goto exit;
}
*address = superio_inw(sioaddr, SIO_REG_ADDR);
if (*address == 0) {
printk(KERN_WARNING DRVNAME ": Base address not set\n");
+ err = -ENODEV;
goto exit;
}
*address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
- release_region(sioaddr, 2);
return err;
}
dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
cpm->adap.name);
+ /*
+ * register OF I2C devices
+ */
+ of_i2c_register_devices(&cpm->adap);
+
return 0;
out_shut:
cpm_i2c_shutdown(cpm);
dev->terminate = 0;
- /* write the data into mode register */
- davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-
/*
* First byte should be set here, not after interrupt,
* because transmit-data-ready interrupt can come before
dev->buf_len--;
}
+ /* write the data into mode register; start transmitting */
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (r == 0) {
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+ /* Now register all the child nodes */
+ of_i2c_register_devices(adap);
+
return 0;
error_cleanup:
dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
+ of_i2c_register_devices(&i2c->adap);
return result;
return result;
} else if (result == 0) {
dev_dbg(i2c->dev, "%s: timeout\n", __func__);
- result = -ETIMEDOUT;
+ return -ETIMEDOUT;
}
return 0;
static int pca_isa_waitforcompletion(void *pd)
{
- long ret = ~0;
unsigned long timeout;
+ long ret;
if (irq > -1) {
ret = wait_event_timeout(pca_wait,
} else {
/* Do polling */
timeout = jiffies + pca_isa_ops.timeout;
- while (((pca_isa_readbyte(pd, I2C_PCA_CON)
- & I2C_PCA_CON_SI) == 0)
- && (ret = time_before(jiffies, timeout)))
+ do {
+ ret = time_before(jiffies, timeout);
+ if (pca_isa_readbyte(pd, I2C_PCA_CON)
+ & I2C_PCA_CON_SI)
+ break;
udelay(100);
+ } while (ret);
}
+
return ret > 0;
}
static int i2c_pca_pf_waitforcompletion(void *pd)
{
struct i2c_pca_pf_data *i2c = pd;
- long ret = ~0;
unsigned long timeout;
+ long ret;
if (i2c->irq) {
ret = wait_event_timeout(i2c->wait,
} else {
/* Do polling */
timeout = jiffies + i2c->adap.timeout;
- while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
- & I2C_PCA_CON_SI) == 0)
- && (ret = time_before(jiffies, timeout)))
+ do {
+ ret = time_before(jiffies, timeout);
+ if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+ & I2C_PCA_CON_SI)
+ break;
udelay(100);
+ } while (ret);
}
return ret > 0;
unsigned long sda_delay;
if (pdata->sda_delay) {
- sda_delay = (freq / 1000) * pdata->sda_delay;
- sda_delay /= 1000000;
+ sda_delay = clkin * pdata->sda_delay;
+ sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
sda_delay = DIV_ROUND_UP(sda_delay, 5);
if (sda_delay > 3)
sda_delay = 3;
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/mutex.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/completion.h>
#include <linux/hardirq.h>
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->suspend ? pm->suspend(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->suspend ? pm->suspend(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_SUSPEND);
}
else
ret = i2c_legacy_resume(dev);
- if (!ret) {
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- }
-
return ret;
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->freeze ? pm->freeze(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->freeze ? pm->freeze(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_FREEZE);
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->thaw ? pm->thaw(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->thaw ? pm->thaw(dev) : 0;
+ }
return i2c_legacy_resume(dev);
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->poweroff ? pm->poweroff(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->poweroff ? pm->poweroff(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
}
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
- /* Register devices from the device tree */
- of_i2c_register_devices(adap);
-
/* Notify drivers */
mutex_lock(&core_lock);
bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
static unsigned int lapic_timer_reliable_states;
-static struct cpuidle_device *intel_idle_cpuidle_devices;
+static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state);
static struct cpuidle_state *cpuidle_state_table;
.name = "NHM-C3",
.desc = "MWAIT 0x10",
.driver_data = (void *) 0x10,
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 20,
.power_usage = 500,
.target_residency = 80,
.name = "NHM-C6",
.desc = "MWAIT 0x20",
.driver_data = (void *) 0x20,
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.power_usage = 350,
.target_residency = 800,
.name = "ATM-C4",
.desc = "MWAIT 0x30",
.driver_data = (void *) 0x30,
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 100,
.power_usage = 250,
.target_residency = 400,
{ /* MWAIT C5 */ },
{ /* MWAIT C6 */
.name = "ATM-C6",
- .desc = "MWAIT 0x40",
- .driver_data = (void *) 0x40,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .exit_latency = 200,
+ .desc = "MWAIT 0x52",
+ .driver_data = (void *) 0x52,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 140,
.power_usage = 150,
- .target_residency = 800,
- .enter = NULL }, /* disabled */
+ .target_residency = 560,
+ .enter = &intel_idle },
};
/**
local_irq_disable();
+ /*
+ * If the state flag indicates that the TLB will be flushed or if this
+ * is the deepest c-state supported, do a voluntary leave mm to avoid
+ * costly and mostly unnecessary wakeups for flushing the user TLB's
+ * associated with the active mm.
+ */
+ if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED ||
+ (&dev->states[dev->state_count - 1] == state))
+ leave_mm(cpu);
+
if (!(lapic_timer_reliable_states & (1 << (cstate))))
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
memcpy(joydev->abspam, abspam, len);
+ for (i = 0; i < joydev->nabs; i++)
+ joydev->absmap[joydev->abspam[i]] = i;
+
out:
kfree(abspam);
return retval;
retval = uinput_validate_absbits(dev);
if (retval < 0)
goto exit;
+ if (test_bit(ABS_MT_SLOT, dev->absbit)) {
+ int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
+ input_mt_create_slots(dev, nslot);
+ input_set_events_per_packet(dev, 6 * nslot);
+ } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
+ input_set_events_per_packet(dev, 60);
+ }
}
udev->state = UIST_SETUP_COMPLETE;
static int wacom_open(struct input_dev *dev)
{
struct wacom *wacom = input_get_drvdata(dev);
+ int retval = 0;
- mutex_lock(&wacom->lock);
-
- wacom->irq->dev = wacom->usbdev;
-
- if (usb_autopm_get_interface(wacom->intf) < 0) {
- mutex_unlock(&wacom->lock);
+ if (usb_autopm_get_interface(wacom->intf) < 0)
return -EIO;
- }
+
+ mutex_lock(&wacom->lock);
if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
- usb_autopm_put_interface(wacom->intf);
- mutex_unlock(&wacom->lock);
- return -EIO;
+ retval = -EIO;
+ goto out;
}
wacom->open = true;
wacom->intf->needs_remote_wakeup = 1;
+out:
mutex_unlock(&wacom->lock);
- return 0;
+ if (retval)
+ usb_autopm_put_interface(wacom->intf);
+ return retval;
}
static void wacom_close(struct input_dev *dev)
wacom->open = false;
wacom->intf->needs_remote_wakeup = 0;
mutex_unlock(&wacom->lock);
+
+ usb_autopm_put_interface(wacom->intf);
}
static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if (features->type >= INTUOS4S && features->type <= INTUOS4L)
+ if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+ features->type == WACOM_21UX2) {
t = (t << 1) | (data[1] & 1);
+ }
input_report_abs(input, ABS_PRESSURE, t);
input_report_abs(input, ABS_TILT_X,
((data[7] << 1) & 0x7e) | (data[8] >> 7));
}
else if(callid>=0x0000 && callid<=0x7FFF)
{
+ int len;
+
pr_debug("%s: Got Incoming Call\n",
sc_adapter[card]->devicename);
- strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4]));
- strcpy(setup.eazmsn,
- sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn);
+ len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
+ sizeof(setup.phone));
+ if (len >= sizeof(setup.phone))
+ continue;
+ len = strlcpy(setup.eazmsn,
+ sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+ sizeof(setup.eazmsn));
+ if (len >= sizeof(setup.eazmsn))
+ continue;
setup.si1 = 7;
setup.si2 = 0;
setup.plan = 0;
* Handle a GetMyNumber Rsp
*/
if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){
- strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array);
+ strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+ rcvmsg.msg_data.byte_array,
+ sizeof(rcvmsg.msg_data.byte_array));
continue;
}
page = bitmap->sb_page;
offset = sizeof(bitmap_super_t);
if (!file)
- read_sb_page(bitmap->mddev,
- bitmap->mddev->bitmap_info.offset,
- page,
- index, count);
+ page = read_sb_page(
+ bitmap->mddev,
+ bitmap->mddev->bitmap_info.offset,
+ page,
+ index, count);
} else if (file) {
page = read_page(file, index, bitmap, count);
offset = 0;
/* take from bio_init */
bio->bi_next = NULL;
+ bio->bi_flags &= ~(BIO_POOL_MASK-1);
bio->bi_flags |= 1 << BIO_UPTODATE;
+ bio->bi_comp_cpu = -1;
bio->bi_rw = READ;
bio->bi_vcnt = 0;
bio->bi_idx = 0;
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
break;
BUG_ON(sync_blocks < (PAGE_SIZE>>9));
- if (len > (sync_blocks<<9))
+ if ((len >> 9) > sync_blocks)
len = sync_blocks<<9;
}
* a keyup event might follow immediately after the keydown.
*/
spin_lock_irqsave(&ir->keylock, flags);
- if (time_is_after_eq_jiffies(ir->keyup_jiffies))
+ if (time_is_before_eq_jiffies(ir->keyup_jiffies))
ir_keyup(ir);
spin_unlock_irqrestore(&ir->keylock, flags);
}
(ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
" in raw mode" : "");
+ /*
+ * Default delay of 250ms is too short for some protocols, expecially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes.
+ */
+ input_dev->rep[REP_DELAY] = 500;
+
return 0;
out_event:
features |= LIRC_CAN_SET_SEND_CARRIER;
if (ir_dev->props->s_tx_duty_cycle)
- features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
+ features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
}
if (ir_dev->props->s_rx_carrier_range)
"rc%u", (unsigned int)ir->devno);
if (IS_ERR(ir->raw->thread)) {
+ int ret = PTR_ERR(ir->raw->thread);
+
kfree(ir->raw);
ir->raw = NULL;
- return PTR_ERR(ir->raw->thread);
+ return ret;
}
mutex_lock(&ir_raw_handler_lock);
char *tmp = buf;
int i;
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
enabled = ir_dev->rc_tab.ir_type;
allowed = ir_dev->props->allowed_protos;
- } else {
+ } else if (ir_dev->raw) {
enabled = ir_dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
- }
+ } else
+ return sprintf(tmp, "[builtin]\n");
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
(long long)allowed,
int rc, i, count = 0;
unsigned long flags;
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
type = ir_dev->rc_tab.ir_type;
- else
+ else if (ir_dev->raw)
type = ir_dev->raw->enabled_protocols;
+ else {
+ IR_dprintk(1, "Protocol switching not supported\n");
+ return -EINVAL;
+ }
while ((tmp = strsep((char **) &data, " \n")) != NULL) {
if (!*tmp)
}
}
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
ir_dev->rc_tab.ir_type = type;
spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
{ 0x800f0416, KEY_PLAY },
{ 0x800f0418, KEY_PAUSE },
+ { 0x800f046e, KEY_PLAYPAUSE },
{ 0x800f0419, KEY_STOP },
{ 0x800f0417, KEY_RECORD },
{ 0x800f0411, KEY_VOLUMEDOWN },
{ 0x800f0412, KEY_CHANNELUP },
{ 0x800f0413, KEY_CHANNELDOWN },
+ { 0x800f043a, KEY_BRIGHTNESSUP },
+ { 0x800f0480, KEY_BRIGHTNESSDOWN },
{ 0x800f0401, KEY_NUMERIC_1 },
{ 0x800f0402, KEY_NUMERIC_2 },
{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
/* Philips eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
/* Realtek MCE IR Receiver */
{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
/* SMK/Toshiba G83C0004D410 */
else
dev->props.rc.core.bulk_mode = false;
- /* Need a higher delay, to avoid wrong repeat */
- dev->rc_input_dev->rep[REP_DELAY] = 500;
-
dib0700_rc_setup(dev);
return 0;
return adap->fe == NULL ? -ENODEV : 0;
}
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .enable_current_mirror = 1,
+ .disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ else
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ &dib7770p_dib7000p_config) != 0) {
+ err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+ &dib7770p_dib7000p_config);
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
/* DIB807x generic */
static struct dibx000_agc_config dib807x_agc_config[2] = {
{
/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
- { USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
+ { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
- .frontend_attach = stk7070p_frontend_attach,
+ .frontend_attach = stk7770p_frontend_attach,
.tuner_attach = dib7770p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
}
}
kfree(p);
- if (fw) {
- release_firmware(fw);
- }
+ release_firmware(fw);
return ret;
}
// dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
+ reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
+ reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
+
dib7000p_write_word(state, 908, reg_908);
dib7000p_write_word(state, 909, reg_909);
}
default:
case GUARD_INTERVAL_1_32: value *= 1; break;
}
- state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
+ if (state->cfg.diversity_delay == 0)
+ state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
+ else
+ state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo
/* deactive the possibility of diversity reception if extended interleaver */
state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;
int (*agc_control) (struct dvb_frontend *, u8 before);
u8 output_mode;
+ u8 disable_sample_and_hold : 1;
+
+ u8 enable_current_mirror : 1;
+ u8 diversity_delay;
+
};
#define DEFAULT_DIB7000P_I2C_ADDRESS 18
*
* @return pointer to descriptor on success, NULL on error.
*/
-struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+
+struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
{
struct smscore_buffer_t *cb = NULL;
unsigned long flags;
- DEFINE_WAIT(wait);
-
spin_lock_irqsave(&coredev->bufferslock, flags);
-
- /* This function must return a valid buffer, since the buffer list is
- * finite, we check that there is an available buffer, if not, we wait
- * until such buffer become available.
- */
-
- prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
- if (list_empty(&coredev->buffers)) {
- spin_unlock_irqrestore(&coredev->bufferslock, flags);
- schedule();
- spin_lock_irqsave(&coredev->bufferslock, flags);
+ if (!list_empty(&coredev->buffers)) {
+ cb = (struct smscore_buffer_t *) coredev->buffers.next;
+ list_del(&cb->entry);
}
+ spin_unlock_irqrestore(&coredev->bufferslock, flags);
+ return cb;
+}
- finish_wait(&coredev->buffer_mng_waitq, &wait);
-
- cb = (struct smscore_buffer_t *) coredev->buffers.next;
- list_del(&cb->entry);
+struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+{
+ struct smscore_buffer_t *cb = NULL;
- spin_unlock_irqrestore(&coredev->bufferslock, flags);
+ wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev)));
return cb;
}
radio->registers[POWERCFG] = POWERCFG_ENABLE;
if (si470x_set_register(radio, POWERCFG) < 0) {
retval = -EIO;
- goto err_all;
+ goto err_video;
}
msleep(110);
EXTRA_CFLAGS += -Idrivers/media/common/tuners
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb
#include <media/v4l2-chip-ident.h>
#include <media/cx25840.h>
+#include "dvb-usb-ids.h"
#include "xc5000.h"
#include "cx231xx.h"
.driver_info = CX231XX_BOARD_CNXT_RDE_250},
{USB_DEVICE(0x0572, 0x58A1),
.driver_info = CX231XX_BOARD_CNXT_RDU_250},
+ {USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
+ .driver_info = CX231XX_BOARD_UNKNOWN},
{},
};
dev->board.name, dev->model);
/* set the direction for GPIO pins */
- cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
- cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
- cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
+ if (dev->board.tuner_gpio) {
+ cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
+ cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
+ cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
- /* request some modules if any required */
+ /* request some modules if any required */
- /* reset the Tuner */
- cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+ /* reset the Tuner */
+ cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+ }
/* set the mode to Analog mode initially */
cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
state->volume = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
- 0, 65335, 65535 / 100, default_volume);
+ 0, 65535, 65535 / 100, default_volume);
state->mute = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
0, 1, 1, 0);
config VIDEO_CX88_ALSA
tristate "Conexant 2388x DMA audio support"
- depends on VIDEO_CX88 && SND && EXPERIMENTAL
+ depends on VIDEO_CX88 && SND
select SND_PCM
---help---
This is a video4linux driver for direct (DMA) audio on
usb_rcvintpipe(dev, ep->bEndpointAddress),
buffer, buffer_len,
int_irq, (void *)gspca_dev, interval);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
gspca_dev->int_urb = urb;
ret = usb_submit_urb(urb, GFP_KERNEL);
if (ret < 0) {
(data[33] << 10);
avg_lum >>= 9;
atomic_set(&sd->avg_lum, avg_lum);
- gspca_frame_add(gspca_dev, LAST_PACKET,
- data, len);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
return;
}
if (gspca_dev->last_packet_type == LAST_PACKET) {
struct fb_vblank vblank;
u32 trace;
+ memset(&vblank, 0, sizeof(struct fb_vblank));
+
vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
FB_VBLANK_HAVE_VSYNC;
trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
return -EFAULT;
}
- if (in_buf->vb.size < out_buf->vb.size) {
+ if (in_buf->vb.size > out_buf->vb.size) {
v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n");
return -EINVAL;
}
v4l2_m2m_release(dev->m2m_dev);
del_timer_sync(&dev->timer);
video_unregister_device(dev->vfd);
+ video_device_release(dev->vfd);
v4l2_device_unregister(&dev->v4l2_dev);
kfree(dev);
dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
__func__, rect.left, rect.top, rect.width, rect.height);
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
ret = mt9m111_make_rect(client, &rect);
if (!ret)
mt9m111->rect = rect;
static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
{
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
a->bounds.left = MT9M111_MIN_DARK_COLS;
a->bounds.top = MT9M111_MIN_DARK_ROWS;
a->bounds.width = MT9M111_MAX_WIDTH;
a->bounds.height = MT9M111_MAX_HEIGHT;
a->defrect = a->bounds;
- a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->pixelaspect.numerator = 1;
a->pixelaspect.denominator = 1;
mf->width = mt9m111->rect.width;
mf->height = mt9m111->rect.height;
mf->code = mt9m111->fmt->code;
+ mf->colorspace = mt9m111->fmt->colorspace;
mf->field = V4L2_FIELD_NONE;
return 0;
if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC)
return -EINVAL;
break;
- case 0:
- /* No format change, only geometry */
- break;
default:
return -EINVAL;
}
spin_lock_irqsave(&pcdev->lock, flags);
+ if (*fb_active == NULL)
+ goto out;
+
vb = &(*fb_active)->vb;
dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
*fb_active = buf;
+out:
spin_unlock_irqrestore(&pcdev->lock, flags);
}
if (ret >= 0) {
ret = pvr2_ctrl_range_check(cptr,*valptr);
}
- if (maskptr) *maskptr = ~0;
+ *maskptr = ~0;
} else if (cptr->info->type == pvr2_ctl_bool) {
ret = parse_token(ptr,len,valptr,boolNames,
ARRAY_SIZE(boolNames));
} else if (ret == 0) {
*valptr = (*valptr & 1) ? !0 : 0;
}
- if (maskptr) *maskptr = 1;
+ *maskptr = 1;
} else if (cptr->info->type == pvr2_ctl_enum) {
ret = parse_token(
ptr,len,valptr,
if (ret >= 0) {
ret = pvr2_ctrl_range_check(cptr,*valptr);
}
- if (maskptr) *maskptr = ~0;
+ *maskptr = ~0;
} else if (cptr->info->type == pvr2_ctl_bitmask) {
ret = parse_tlist(
ptr,len,maskptr,valptr,
dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
}
+static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f)
+{
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+
+ f->dma_offset.y_h = f->offs_h;
+ if (!variant->pix_hoff)
+ f->dma_offset.y_h *= (f->fmt->depth >> 3);
+
+ f->dma_offset.y_v = f->offs_v;
+
+ f->dma_offset.cb_h = f->offs_h;
+ f->dma_offset.cb_v = f->offs_v;
+
+ f->dma_offset.cr_h = f->offs_h;
+ f->dma_offset.cr_v = f->offs_v;
+
+ if (!variant->pix_hoff) {
+ if (f->fmt->planes_cnt == 3) {
+ f->dma_offset.cb_h >>= 1;
+ f->dma_offset.cr_h >>= 1;
+ }
+ if (f->fmt->color == S5P_FIMC_YCBCR420) {
+ f->dma_offset.cb_v >>= 1;
+ f->dma_offset.cr_v >>= 1;
+ }
+ }
+
+ dbg("in_offset: color= %d, y_h= %d, y_v= %d",
+ f->fmt->color, f->dma_offset.y_h, f->dma_offset.y_v);
+}
+
/**
* fimc_prepare_config - check dimensions, operation and color mode
* and pre-calculate offset and the scaling coefficients.
{
struct fimc_frame *s_frame, *d_frame;
struct fimc_vid_buffer *buf = NULL;
- struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
int ret = 0;
s_frame = &ctx->s_frame;
swap(d_frame->width, d_frame->height);
}
- /* Prepare the output offset ratios for scaler. */
- d_frame->dma_offset.y_h = d_frame->offs_h;
- if (!variant->pix_hoff)
- d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
-
- d_frame->dma_offset.y_v = d_frame->offs_v;
-
- d_frame->dma_offset.cb_h = d_frame->offs_h;
- d_frame->dma_offset.cb_v = d_frame->offs_v;
-
- d_frame->dma_offset.cr_h = d_frame->offs_h;
- d_frame->dma_offset.cr_v = d_frame->offs_v;
+ /* Prepare the DMA offset ratios for scaler. */
+ fimc_prepare_dma_offset(ctx, &ctx->s_frame);
+ fimc_prepare_dma_offset(ctx, &ctx->d_frame);
- if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
- d_frame->dma_offset.cb_h >>= 1;
- d_frame->dma_offset.cb_v >>= 1;
- d_frame->dma_offset.cr_h >>= 1;
- d_frame->dma_offset.cr_v >>= 1;
- }
-
- dbg("out offset: color= %d, y_h= %d, y_v= %d",
- d_frame->fmt->color,
- d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
-
- /* Prepare the input offset ratios for scaler. */
- s_frame->dma_offset.y_h = s_frame->offs_h;
- if (!variant->pix_hoff)
- s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
- s_frame->dma_offset.y_v = s_frame->offs_v;
-
- s_frame->dma_offset.cb_h = s_frame->offs_h;
- s_frame->dma_offset.cb_v = s_frame->offs_v;
-
- s_frame->dma_offset.cr_h = s_frame->offs_h;
- s_frame->dma_offset.cr_v = s_frame->offs_v;
-
- if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
- s_frame->dma_offset.cb_h >>= 1;
- s_frame->dma_offset.cb_v >>= 1;
- s_frame->dma_offset.cr_h >>= 1;
- s_frame->dma_offset.cr_v >>= 1;
- }
-
- dbg("in offset: color= %d, y_h= %d, y_v= %d",
- s_frame->fmt->color, s_frame->dma_offset.y_h,
- s_frame->dma_offset.y_v);
-
- fimc_set_yuv_order(ctx);
-
- /* Check against the scaler ratio. */
if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
err("out of scaler range");
return -EINVAL;
}
+ fimc_set_yuv_order(ctx);
}
/* Input DMA mode is not allowed when the scaler is disabled. */
} else {
v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
"Wrong buffer/video queue type (%d)\n", f->type);
- return -EINVAL;
+ ret = -EINVAL;
+ goto s_fmt_out;
}
pix = &f->fmt.pix;
}
fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
- if (!fimc->work_queue)
+ if (!fimc->work_queue) {
+ ret = -ENOMEM;
goto err_irq;
+ }
ret = fimc_register_m2m_device(fimc);
if (ret)
};
static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+ .pix_hoff = 1,
.has_inp_rot = 1,
.has_out_rot = 1,
.min_inp_pixsize = 16,
};
static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+ .pix_hoff = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 32,
},
[SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = {
/* Beholder Intl. Ltd. 2008 */
- /*Dmitry Belimov <d.belimov@gmail.com> */
- .name = "Beholder BeholdTV Columbus TVFM",
+ /* Dmitry Belimov <d.belimov@gmail.com> */
+ .name = "Beholder BeholdTV Columbus TV/FM",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_ALPS_TSBE5_PAL,
- .radio_type = UNSET,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .radio_type = TUNER_TEA5767,
+ .tuner_addr = 0xc2 >> 1,
+ .radio_addr = 0xc0 >> 1,
.tda9887_conf = TDA9887_PRESENT,
.gpiomask = 0x000A8004,
.inputs = {{
int saa7164_buffer_dealloc(struct saa7164_tsport *port,
struct saa7164_buffer *buf)
{
- struct saa7164_dev *dev = port->dev;
+ struct saa7164_dev *dev;
- if ((buf == 0) || (port == 0))
+ if (!buf || !port)
return SAA_ERR_BAD_PARAMETER;
+ dev = port->dev;
dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf);
max(frame->dwFrameInterval[0],
frame->dwDefaultFrameInterval));
+ if (dev->quirks & UVC_QUIRK_RESTRICT_FRAME_RATE) {
+ frame->bFrameIntervalType = 1;
+ frame->dwFrameInterval[0] =
+ frame->dwDefaultFrameInterval;
+ }
+
uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n",
frame->wWidth, frame->wHeight,
10000000/frame->dwDefaultFrameInterval,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0 },
+ /* Chicony CNF7129 (Asus EEE 100HE) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x04f2,
+ .idProduct = 0xb071,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_RESTRICT_FRAME_RATE },
/* Alcor Micro AU3820 (Future Boy PC USB Webcam) */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_PROBE_MINMAX
| UVC_QUIRK_PROBE_DEF },
+ /* IMC Networks (Medion Akoya) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x13d3,
+ .idProduct = 0x5103,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
/* Syntek (HP Spartan) */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020
#define UVC_QUIRK_FIX_BANDWIDTH 0x00000080
#define UVC_QUIRK_PROBE_DEF 0x00000100
+#define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
}
/* read() method */
- dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
- mem->vaddr = NULL;
+ if (mem->vaddr) {
+ dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
+ mem->vaddr = NULL;
+ }
}
EXPORT_SYMBOL_GPL(videobuf_dma_contig_free);
* must free the memory.
*/
static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
- int nr_pages, int offset)
+ int nr_pages, int offset, size_t size)
{
struct scatterlist *sglist;
int i;
/* DMA to highmem pages might not work */
goto highmem;
sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
+ size -= PAGE_SIZE - offset;
for (i = 1; i < nr_pages; i++) {
if (NULL == pages[i])
goto nopage;
if (PageHighMem(pages[i]))
goto highmem;
- sg_set_page(&sglist[i], pages[i], PAGE_SIZE, 0);
+ sg_set_page(&sglist[i], pages[i], min(PAGE_SIZE, size), 0);
+ size -= min(PAGE_SIZE, size);
}
return sglist;
first = (data & PAGE_MASK) >> PAGE_SHIFT;
last = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT;
- dma->offset = data & ~PAGE_MASK;
+ dma->offset = data & ~PAGE_MASK;
+ dma->size = size;
dma->nr_pages = last-first+1;
dma->pages = kmalloc(dma->nr_pages * sizeof(struct page *), GFP_KERNEL);
if (NULL == dma->pages)
if (dma->pages) {
dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
- dma->offset);
+ dma->offset, dma->size);
}
if (dma->vaddr) {
dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr,
irq_tsc = cache_tsc;
for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
irq_data = &max8925_irqs[i];
+ /* 1 -- disable, 0 -- enable */
switch (irq_data->mask_reg) {
case MAX8925_CHG_IRQ1_MASK:
- irq_chg[0] &= irq_data->enable;
+ irq_chg[0] &= ~irq_data->enable;
break;
case MAX8925_CHG_IRQ2_MASK:
- irq_chg[1] &= irq_data->enable;
+ irq_chg[1] &= ~irq_data->enable;
break;
case MAX8925_ON_OFF_IRQ1_MASK:
- irq_on[0] &= irq_data->enable;
+ irq_on[0] &= ~irq_data->enable;
break;
case MAX8925_ON_OFF_IRQ2_MASK:
- irq_on[1] &= irq_data->enable;
+ irq_on[1] &= ~irq_data->enable;
break;
case MAX8925_RTC_IRQ_MASK:
- irq_rtc &= irq_data->enable;
+ irq_rtc &= ~irq_data->enable;
break;
case MAX8925_TSC_IRQ_MASK:
- irq_tsc &= irq_data->enable;
+ irq_tsc &= ~irq_data->enable;
break;
default:
dev_err(chip->dev, "wrong IRQ\n");
irq = irq - wm831x->irq_base;
- if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11)
- return -EINVAL;
+ if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
+ /* Ignore internal-only IRQs */
+ if (irq >= 0 && irq < WM831X_NUM_IRQS)
+ return 0;
+ else
+ return -EINVAL;
+ }
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
ddata = i2c_get_clientdata(client);
sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
- i2c_set_clientdata(client, NULL);
kfree(ddata);
return 0;
prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
} while (prefetch_status);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset();
+ gpmc_prefetch_reset(info->gpmc_cs);
dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
return 0;
config MV643XX_ETH
tristate "Marvell Discovery (643XX) and Orion ethernet support"
- depends on MV64X60 || PPC32 || PLAT_ORION
+ depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
select INET_LRO
select PHYLIB
help
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
- depends on PPC_PASEMI && PCI
+ depends on PPC_PASEMI && PCI && INET
select PHYLIB
select INET_LRO
help
dev->irq = sdev->irq;
SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
- netif_carrier_off(dev);
-
err = ssb_bus_powerup(sdev->bus, 0);
if (err) {
dev_err(sdev->dev,
goto err_out_powerdown;
}
+ netif_carrier_off(dev);
+
ssb_set_drvdata(sdev, dev);
/* Chip reset provides power to the b44 MAC & PCI cores, which
res = dev_alloc_name(bond_dev, "bond%d");
if (res < 0)
goto out;
+ } else {
+ /*
+ * If we're given a name to register
+ * we need to ensure that its not already
+ * registered
+ */
+ res = -EEXIST;
+ if (__dev_get_by_name(net, name) != NULL)
+ goto out;
}
res = register_netdevice(bond_dev);
int length = cqe->num_bytes_transfered - 4; /*remove CRC */
skb_put(skb, length);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->protocol = eth_type_trans(skb, dev);
+
+ /* The packet was not an IPV4 packet so a complemented checksum was
+ calculated. The value is found in the Internet Checksum field. */
+ if (cqe->status & EHEA_CQE_BLIND_CKSUM) {
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ skb->csum = csum_unfold(~cqe->inet_checksum_value);
+ } else
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
}
static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array,
#define EHEA_CQE_TYPE_RQ 0x60
#define EHEA_CQE_STAT_ERR_MASK 0x700F
#define EHEA_CQE_STAT_FAT_ERR_MASK 0xF
+#define EHEA_CQE_BLIND_CKSUM 0x8000
#define EHEA_CQE_STAT_ERR_TCP 0x4000
#define EHEA_CQE_STAT_ERR_IP 0x2000
#define EHEA_CQE_STAT_ERR_CRC 0x1000
{
struct fec_enet_private *fep = netdev_priv(dev);
struct phy_device *phy_dev = NULL;
- int ret;
+ char mdio_bus_id[MII_BUS_ID_SIZE];
+ char phy_name[MII_BUS_ID_SIZE + 3];
+ int phy_id;
fep->phy_dev = NULL;
- /* find the first phy */
- phy_dev = phy_find_first(fep->mii_bus);
- if (!phy_dev) {
- printk(KERN_ERR "%s: no PHY found\n", dev->name);
- return -ENODEV;
+ /* check for attached phy */
+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+ if ((fep->mii_bus->phy_mask & (1 << phy_id)))
+ continue;
+ if (fep->mii_bus->phy_map[phy_id] == NULL)
+ continue;
+ if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
+ continue;
+ strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
+ break;
}
- /* attach the mac to the phy */
- ret = phy_connect_direct(dev, phy_dev,
- &fec_enet_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
- if (ret) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return ret;
+ if (phy_id >= PHY_MAX_ADDR) {
+ printk(KERN_INFO "%s: no PHY, assuming direct connection "
+ "to switch\n", dev->name);
+ strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE);
+ phy_id = 0;
+ }
+
+ snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ phy_dev = phy_connect(dev, phy_name, &fec_enet_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phy_dev)) {
+ printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
+ return PTR_ERR(phy_dev);
}
/* mask with MAC supported features */
fep->mii_bus->read = fec_enet_mdio_read;
fep->mii_bus->write = fec_enet_mdio_write;
fep->mii_bus->reset = fec_enet_mdio_reset;
- snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
+ snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1);
fep->mii_bus->priv = fep;
fep->mii_bus->parent = &pdev->dev;
if (ret)
goto failed_mii_init;
+ /* Carrier starts down, phylib will bring it up */
+ netif_carrier_off(ndev);
+
ret = register_netdev(ndev);
if (ret)
goto failed_register;
if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
return;
- counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+ counters = dma_alloc_coherent(&tp->pci_dev->dev, sizeof(*counters),
+ &paddr, GFP_KERNEL);
if (!counters)
return;
RTL_W32(CounterAddrLow, 0);
RTL_W32(CounterAddrHigh, 0);
- pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+ dma_free_coherent(&tp->pci_dev->dev, sizeof(*counters), counters,
+ paddr);
}
static void rtl8169_get_ethtool_stats(struct net_device *dev,
/*
* Rx and Tx desscriptors needs 256 bytes alignment.
- * pci_alloc_consistent provides more.
+ * dma_alloc_coherent provides more.
*/
- tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES,
- &tp->TxPhyAddr);
+ tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES,
+ &tp->TxPhyAddr, GFP_KERNEL);
if (!tp->TxDescArray)
goto err_pm_runtime_put;
- tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES,
- &tp->RxPhyAddr);
+ tp->RxDescArray = dma_alloc_coherent(&pdev->dev, R8169_RX_RING_BYTES,
+ &tp->RxPhyAddr, GFP_KERNEL);
if (!tp->RxDescArray)
goto err_free_tx_0;
err_release_ring_2:
rtl8169_rx_clear(tp);
err_free_rx_1:
- pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
- tp->RxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
tp->RxDescArray = NULL;
err_free_tx_0:
- pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
- tp->TxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
tp->TxDescArray = NULL;
err_pm_runtime_put:
pm_runtime_put_noidle(&pdev->dev);
{
struct pci_dev *pdev = tp->pci_dev;
- pci_unmap_single(pdev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
+ dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(*sk_buff);
*sk_buff = NULL;
static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
struct net_device *dev,
struct RxDesc *desc, int rx_buf_sz,
- unsigned int align)
+ unsigned int align, gfp_t gfp)
{
struct sk_buff *skb;
dma_addr_t mapping;
pad = align ? align : NET_IP_ALIGN;
- skb = netdev_alloc_skb(dev, rx_buf_sz + pad);
+ skb = __netdev_alloc_skb(dev, rx_buf_sz + pad, gfp);
if (!skb)
goto err_out;
skb_reserve(skb, align ? ((pad - 1) & (unsigned long)skb->data) : pad);
- mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+ mapping = dma_map_single(&pdev->dev, skb->data, rx_buf_sz,
PCI_DMA_FROMDEVICE);
rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
}
static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
- u32 start, u32 end)
+ u32 start, u32 end, gfp_t gfp)
{
u32 cur;
skb = rtl8169_alloc_rx_skb(tp->pci_dev, dev,
tp->RxDescArray + i,
- tp->rx_buf_sz, tp->align);
+ tp->rx_buf_sz, tp->align, gfp);
if (!skb)
break;
memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
- if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+ if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC, GFP_KERNEL) != NUM_RX_DESC)
goto err_out;
rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
{
unsigned int len = tx_skb->len;
- pci_unmap_single(pdev, le64_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+ dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), len,
+ PCI_DMA_TODEVICE);
desc->opts1 = 0x00;
desc->opts2 = 0x00;
desc->addr = 0x00;
txd = tp->TxDescArray + entry;
len = frag->size;
addr = ((void *) page_address(frag->page)) + frag->page_offset;
- mapping = pci_map_single(tp->pci_dev, addr, len, PCI_DMA_TODEVICE);
+ mapping = dma_map_single(&tp->pci_dev->dev, addr, len,
+ PCI_DMA_TODEVICE);
/* anti gcc 2.95.3 bugware (sic) */
status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
tp->tx_skb[entry].skb = skb;
}
- mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+ mapping = dma_map_single(&tp->pci_dev->dev, skb->data, len,
+ PCI_DMA_TODEVICE);
tp->tx_skb[entry].len = len;
txd->addr = cpu_to_le64(mapping);
if (!skb)
goto out;
- pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
- PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_cpu(&tp->pci_dev->dev, addr, pkt_size,
+ PCI_DMA_FROMDEVICE);
skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
*sk_buff = skb;
done = true;
rtl8169_rx_csum(skb, desc);
if (rtl8169_try_rx_copy(&skb, tp, pkt_size, addr)) {
- pci_dma_sync_single_for_device(pdev, addr,
+ dma_sync_single_for_device(&pdev->dev, addr,
pkt_size, PCI_DMA_FROMDEVICE);
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
} else {
- pci_unmap_single(pdev, addr, tp->rx_buf_sz,
+ dma_unmap_single(&pdev->dev, addr, tp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
tp->Rx_skbuff[entry] = NULL;
}
count = cur_rx - tp->cur_rx;
tp->cur_rx = cur_rx;
- delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+ delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx, GFP_ATOMIC);
if (!delta && count)
netif_info(tp, intr, dev, "no Rx buffer allocated\n");
tp->dirty_rx += delta;
free_irq(dev->irq, dev);
- pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
- tp->RxPhyAddr);
- pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
- tp->TxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
tp->TxDescArray = NULL;
tp->RxDescArray = NULL;
#include <linux/seq_file.h>
#include <linux/mii.h>
#include <linux/slab.h>
+#include <linux/dmi.h>
#include <asm/irq.h>
#include "skge.h"
netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr);
}
+static int only_32bit_dma;
+
static int __devinit skge_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
pci_set_master(pdev);
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (!only_32bit_dma && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
using_dac = 1;
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
} else if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
.shutdown = skge_shutdown,
};
+static struct dmi_system_id skge_32bit_dma_boards[] = {
+ {
+ .ident = "Gigabyte nForce boards",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co"),
+ DMI_MATCH(DMI_BOARD_NAME, "nForce"),
+ },
+ },
+ {}
+};
+
static int __init skge_init_module(void)
{
+ if (dmi_check_system(skge_32bit_dma_boards))
+ only_32bit_dma = 1;
skge_debug_init();
return pci_register_driver(&skge_driver);
}
desc_idx, *post_ptr);
drop_it_no_recycle:
/* Other statistics kept track of by card. */
- tp->net_stats.rx_dropped++;
+ tp->rx_dropped++;
goto next_pkt;
}
if (len > (tp->dev->mtu + ETH_HLEN) &&
skb->protocol != htons(ETH_P_8021Q)) {
dev_kfree_skb(skb);
- goto next_pkt;
+ goto drop_it_no_recycle;
}
if (desc->type_flags & RXD_FLAG_VLAN &&
stats->rx_missed_errors = old_stats->rx_missed_errors +
get_stat64(&hw_stats->rx_discards);
+ stats->rx_dropped = tp->rx_dropped;
+
return stats;
}
/* begin "everything else" cacheline(s) section */
- struct rtnl_link_stats64 net_stats;
+ unsigned long rx_dropped;
struct rtnl_link_stats64 net_stats_prev;
struct tg3_ethtool_stats estats;
struct tg3_ethtool_stats estats_prev;
int i, result;
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_msg_hdr *msg_hdr;
- size_t pl_itr, pl_size, skb_len;
+ size_t pl_itr, pl_size;
unsigned long flags;
- unsigned num_pls, single_last;
+ unsigned num_pls, single_last, skb_len;
skb_len = skb->len;
- d_fnstart(4, dev, "(i2400m %p skb %p [size %zu])\n",
+ d_fnstart(4, dev, "(i2400m %p skb %p [size %u])\n",
i2400m, skb, skb_len);
result = -EIO;
msg_hdr = (void *) skb->data;
- result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb->len);
+ result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb_len);
if (result < 0)
goto error_msg_hdr_check;
result = -EIO;
pl_itr = sizeof(*msg_hdr) + /* Check payload descriptor(s) */
num_pls * sizeof(msg_hdr->pld[0]);
pl_itr = ALIGN(pl_itr, I2400M_PL_ALIGN);
- if (pl_itr > skb->len) { /* got all the payload descriptors? */
+ if (pl_itr > skb_len) { /* got all the payload descriptors? */
dev_err(dev, "RX: HW BUG? message too short (%u bytes) for "
"%u payload descriptors (%zu each, total %zu)\n",
- skb->len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
+ skb_len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
goto error_pl_descr_short;
}
/* Walk each payload payload--check we really got it */
/* work around old gcc warnings */
pl_size = i2400m_pld_size(&msg_hdr->pld[i]);
result = i2400m_rx_pl_descr_check(i2400m, &msg_hdr->pld[i],
- pl_itr, skb->len);
+ pl_itr, skb_len);
if (result < 0)
goto error_pl_descr_check;
single_last = num_pls == 1 || i == num_pls - 1;
if (i < i2400m->rx_pl_min)
i2400m->rx_pl_min = i;
i2400m->rx_num++;
- i2400m->rx_size_acc += skb->len;
- if (skb->len < i2400m->rx_size_min)
- i2400m->rx_size_min = skb->len;
- if (skb->len > i2400m->rx_size_max)
- i2400m->rx_size_max = skb->len;
+ i2400m->rx_size_acc += skb_len;
+ if (skb_len < i2400m->rx_size_min)
+ i2400m->rx_size_min = skb_len;
+ if (skb_len > i2400m->rx_size_max)
+ i2400m->rx_size_max = skb_len;
spin_unlock_irqrestore(&i2400m->rx_lock, flags);
error_pl_descr_check:
error_pl_descr_short:
error_msg_hdr_check:
- d_fnend(4, dev, "(i2400m %p skb %p [size %zu]) = %d\n",
+ d_fnend(4, dev, "(i2400m %p skb %p [size %u]) = %d\n",
i2400m, skb, skb_len, result);
return result;
}
if (conf_is_ht40(conf))
return clockrate * 2;
- return clockrate * 2;
+ return clockrate;
}
static int32_t ath9k_hw_ani_get_listen_time(struct ath_hw *ah)
clear_bit(STATUS_SCAN_HW, &priv->status);
clear_bit(STATUS_SCANNING, &priv->status);
/* inform mac80211 scan aborted */
- queue_work(priv->workqueue, &priv->scan_completed);
+ queue_work(priv->workqueue, &priv->abort_scan);
}
int iwlagn_manage_ibss_station(struct iwl_priv *priv,
clear_bit(STATUS_SCANNING, &priv->status);
/* inform mac80211 scan aborted */
- queue_work(priv->workqueue, &priv->scan_completed);
+ queue_work(priv->workqueue, &priv->abort_scan);
}
static void iwl3945_bg_restart(struct work_struct *data)
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
+/*
+ * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
+ * for some HT machines to use C4 w/o hanging.
+ */
+static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev)
+{
+ u32 pmbase;
+ u16 pm1a;
+
+ pci_read_config_dword(dev, 0x40, &pmbase);
+ pmbase = pmbase & 0xff80;
+ pm1a = inw(pmbase);
+
+ if (pm1a & 0x10) {
+ dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
+ outw(0x10, pmbase);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+
/*
* Chipsets where PCI->PCI transfers vanish or hang
*/
* TODO:
* - handle CPU hotplug
* - provide turbo enable/disable api
- * - make sure we can write turbo enable/disable reg based on MISC_EN
*
* Related documents:
* - CDI 403777, 403778 - Auburndale EDS vol 1 & 2
#define THM_TC2 0xac
#define THM_DTV 0xb0
#define THM_ITV 0xd8
-#define ITV_ME_SEQNO_MASK 0x000f0000 /* ME should update every ~200ms */
+#define ITV_ME_SEQNO_MASK 0x00ff0000 /* ME should update every ~200ms */
#define ITV_ME_SEQNO_SHIFT (16)
#define ITV_MCH_TEMP_MASK 0x0000ff00
#define ITV_MCH_TEMP_SHIFT (8)
bool gpu_preferred;
bool poll_turbo_status;
bool second_cpu;
+ bool turbo_toggle_allowed;
struct ips_mcp_limits *limits;
/* Optional MCH interfaces for if i915 is in use */
new_limit = cur_limit - 8; /* 1W decrease */
/* Clamp to SKU TDP limit */
- if (((new_limit * 10) / 8) < (ips->orig_turbo_limit & TURBO_TDP_MASK))
+ if (new_limit < (ips->orig_turbo_limit & TURBO_TDP_MASK))
new_limit = ips->orig_turbo_limit & TURBO_TDP_MASK;
thm_writew(THM_MPCPC, (new_limit * 10) / 8);
if (ips->__cpu_turbo_on)
return;
- on_each_cpu(do_enable_cpu_turbo, ips, 1);
+ if (ips->turbo_toggle_allowed)
+ on_each_cpu(do_enable_cpu_turbo, ips, 1);
ips->__cpu_turbo_on = true;
}
if (!ips->__cpu_turbo_on)
return;
- on_each_cpu(do_disable_cpu_turbo, ips, 1);
+ if (ips->turbo_toggle_allowed)
+ on_each_cpu(do_disable_cpu_turbo, ips, 1);
ips->__cpu_turbo_on = false;
}
{
unsigned long flags;
bool ret = false;
+ u32 temp_limit;
+ u32 avg_power;
+ const char *msg = "MCP limit exceeded: ";
spin_lock_irqsave(&ips->turbo_status_lock, flags);
- if (ips->mcp_avg_temp > (ips->mcp_temp_limit * 100))
- ret = true;
- if (ips->cpu_avg_power + ips->mch_avg_power > ips->mcp_power_limit)
+
+ temp_limit = ips->mcp_temp_limit * 100;
+ if (ips->mcp_avg_temp > temp_limit) {
+ dev_info(&ips->dev->dev,
+ "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp,
+ temp_limit);
ret = true;
- spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+ }
- if (ret)
+ avg_power = ips->cpu_avg_power + ips->mch_avg_power;
+ if (avg_power > ips->mcp_power_limit) {
dev_info(&ips->dev->dev,
- "MCP power or thermal limit exceeded\n");
+ "%sAvg power %u, limit %u\n", msg, avg_power,
+ ips->mcp_power_limit);
+ ret = true;
+ }
+
+ spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
return ret;
}
return ret;
}
+/**
+ * verify_limits - verify BIOS provided limits
+ * @ips: IPS structure
+ *
+ * BIOS can optionally provide non-default limits for power and temp. Check
+ * them here and use the defaults if the BIOS values are not provided or
+ * are otherwise unusable.
+ */
+static void verify_limits(struct ips_driver *ips)
+{
+ if (ips->mcp_power_limit < ips->limits->mcp_power_limit ||
+ ips->mcp_power_limit > 35000)
+ ips->mcp_power_limit = ips->limits->mcp_power_limit;
+
+ if (ips->mcp_temp_limit < ips->limits->core_temp_limit ||
+ ips->mcp_temp_limit < ips->limits->mch_temp_limit ||
+ ips->mcp_temp_limit > 150)
+ ips->mcp_temp_limit = min(ips->limits->core_temp_limit,
+ ips->limits->mch_temp_limit);
+}
+
/**
* update_turbo_limits - get various limits & settings from regs
* @ips: IPS driver struct
u32 hts = thm_readl(THM_HTS);
ips->cpu_turbo_enabled = !(hts & HTS_PCTD_DIS);
- ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+ /*
+ * Disable turbo for now, until we can figure out why the power figures
+ * are wrong
+ */
+ ips->cpu_turbo_enabled = false;
+
+ if (ips->gpu_busy)
+ ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+
ips->core_power_limit = thm_readw(THM_MPCPC);
ips->mch_power_limit = thm_readw(THM_MMGPC);
ips->mcp_temp_limit = thm_readw(THM_PTL);
ips->mcp_power_limit = thm_readw(THM_MPPC);
+ verify_limits(ips);
/* Ignore BIOS CPU vs GPU pref */
}
ret = (ret * 1000) / 65535;
*last = val;
- return ret;
+ return 0;
}
static const u16 temp_decay_factor = 2;
kfree(mch_samples);
kfree(cpu_samples);
kfree(mchp_samples);
- kthread_stop(ips->adjust);
return -ENOMEM;
}
ITV_ME_SEQNO_SHIFT;
seqno_timestamp = get_jiffies_64();
- old_cpu_power = thm_readl(THM_CEC) / 65535;
+ old_cpu_power = thm_readl(THM_CEC);
schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
/* Collect an initial average */
STS_GPL_SHIFT;
/* ignore EC CPU vs GPU pref */
ips->cpu_turbo_enabled = !(sts & STS_PCTD_DIS);
- ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
+ /*
+ * Disable turbo for now, until we can figure
+ * out why the power figures are wrong
+ */
+ ips->cpu_turbo_enabled = false;
+ if (ips->gpu_busy)
+ ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
ips->mcp_temp_limit = (sts & STS_PTL_MASK) >>
STS_PTL_SHIFT;
ips->mcp_power_limit = (tc1 & STS_PPL_MASK) >>
STS_PPL_SHIFT;
+ verify_limits(ips);
spin_unlock(&ips->turbo_status_lock);
thm_writeb(THM_SEC, SEC_ACK);
* turbo manually or we'll get an illegal MSR access, even though
* turbo will still be available.
*/
- if (!(misc_en & IA32_MISC_TURBO_EN))
- ; /* add turbo MSR write allowed flag if necessary */
+ if (misc_en & IA32_MISC_TURBO_EN)
+ ips->turbo_toggle_allowed = true;
+ else
+ ips->turbo_toggle_allowed = false;
if (strstr(boot_cpu_data.x86_model_id, "CPU M"))
limits = &ips_sv_limits;
tdp = turbo_power & TURBO_TDP_MASK;
/* Sanity check TDP against CPU */
- if (limits->mcp_power_limit != (tdp / 8) * 1000) {
- dev_warn(&ips->dev->dev, "Warning: CPU TDP doesn't match expected value (found %d, expected %d)\n",
- tdp / 8, limits->mcp_power_limit / 1000);
+ if (limits->core_power_limit != (tdp / 8) * 1000) {
+ dev_info(&ips->dev->dev, "CPU TDP doesn't match expected value (found %d, expected %d)\n",
+ tdp / 8, limits->core_power_limit / 1000);
+ limits->core_power_limit = (tdp / 8) * 1000;
}
out:
return true;
out_put_busy:
- symbol_put(i915_gpu_turbo_disable);
+ symbol_put(i915_gpu_busy);
out_put_lower:
symbol_put(i915_gpu_lower);
out_put_raise:
/* Save turbo limits & ratios */
rdmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
- ips_enable_cpu_turbo(ips);
- ips->cpu_turbo_enabled = true;
+ ips_disable_cpu_turbo(ips);
+ ips->cpu_turbo_enabled = false;
- /* Set up the work queue and monitor/adjust threads */
- ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
- if (IS_ERR(ips->monitor)) {
+ /* Create thermal adjust thread */
+ ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
+ if (IS_ERR(ips->adjust)) {
dev_err(&dev->dev,
- "failed to create thermal monitor thread, aborting\n");
+ "failed to create thermal adjust thread, aborting\n");
ret = -ENOMEM;
goto error_free_irq;
+
}
- ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
- if (IS_ERR(ips->adjust)) {
+ /*
+ * Set up the work queue and monitor thread. The monitor thread
+ * will wake up ips_adjust thread.
+ */
+ ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
+ if (IS_ERR(ips->monitor)) {
dev_err(&dev->dev,
- "failed to create thermal adjust thread, aborting\n");
+ "failed to create thermal monitor thread, aborting\n");
ret = -ENOMEM;
goto error_thread_cleanup;
}
return ret;
error_thread_cleanup:
- kthread_stop(ips->monitor);
+ kthread_stop(ips->adjust);
error_free_irq:
free_irq(ips->dev->irq, ips);
error_unmap:
regulator_unregister(chip->rdev);
kfree(chip);
- i2c_set_clientdata(client, NULL);
return 0;
}
constraints->min_uA != constraints->max_uA) {
ret = _regulator_get_current_limit(rdev);
if (ret > 0)
- count += sprintf(buf + count, "at %d uA ", ret / 1000);
+ count += sprintf(buf + count, "at %d mA ", ret / 1000);
}
if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
dev_set_name(&rdev->dev, "regulator.%d",
atomic_inc_return(®ulator_no) - 1);
ret = device_register(&rdev->dev);
- if (ret != 0)
+ if (ret != 0) {
+ put_device(&rdev->dev);
goto clean;
+ }
dev_set_drvdata(&rdev->dev, rdev);
struct isl_pmic *pmic = i2c_get_clientdata(i2c);
int i;
- i2c_set_clientdata(i2c, NULL);
-
for (i = 0; i < 3; i++)
regulator_unregister(pmic->rdev[i]);
/* set external clock frequency */
info->extclk_freq = pdata->extclk_freq;
max8649_set_bits(info->i2c, MAX8649_SYNC, MAX8649_EXT_MASK,
- info->extclk_freq);
+ info->extclk_freq << 6);
}
if (pdata->ramp_timing) {
free_irq(client->irq, client);
out_free:
- i2c_set_clientdata(client, NULL);
kfree(ds3232);
return ret;
}
}
rtc_device_unregister(ds3232->rtc);
- i2c_set_clientdata(client, NULL);
kfree(ds3232);
return 0;
}
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/init.h>
#include <linux/cache.h>
#include <linux/mutex.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
const struct spi_device *spi = to_spi_device(dev);
const struct spi_driver *sdrv = to_spi_driver(drv);
+ /* Attempt an OF style match */
+ if (of_driver_match_device(dev, drv))
+ return 1;
+
if (sdrv->id_table)
return !!spi_match_id(sdrv->id_table, spi);
spi_gpio->bitbang.master = spi_master_get(master);
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
- if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) {
+ if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
xfer_ofs = mspi->xfer_in_progress->len - mspi->count;
- out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
+ if (mspi->rx_dma == mspi->dma_dummy_rx)
+ out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma);
+ else
+ out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
out_be16(&rx_bd->cbd_datlen, 0);
out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP);
- out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
+ if (mspi->tx_dma == mspi->dma_dummy_tx)
+ out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma);
+ else
+ out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
out_be16(&tx_bd->cbd_datlen, xfer_len);
out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP |
BD_SC_LAST);
config VIDEO_TM6000
tristate "TV Master TM5600/6000/6010 driver"
- depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
+ depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
select VIDEO_TUNER
select MEDIA_TUNER_XC2028
select MEDIA_TUNER_XC5000
}
struct tm6000_ir_poll_result {
- u8 rc_data[4];
+ u16 rc_data;
};
struct tm6000_IR {
int polling;
struct delayed_work work;
u8 wait:1;
+ u8 key:1;
struct urb *int_urb;
u8 *urb_data;
- u8 key:1;
int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
if (urb->status != 0)
printk(KERN_INFO "not ready\n");
- else if (urb->actual_length > 0)
+ else if (urb->actual_length > 0) {
memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
- dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
- ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+ dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
+ ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
- ir->key = 1;
+ ir->key = 1;
+ }
rc = usb_submit_urb(urb, GFP_ATOMIC);
}
int rc;
u8 buf[2];
- if (ir->wait && !&dev->int_in) {
- poll_result->rc_data[0] = 0xff;
+ if (ir->wait && !&dev->int_in)
return 0;
- }
if (&dev->int_in) {
- poll_result->rc_data[0] = ir->urb_data[0];
- poll_result->rc_data[1] = ir->urb_data[1];
+ if (ir->ir.ir_type == IR_TYPE_RC5)
+ poll_result->rc_data = ir->urb_data[0];
+ else
+ poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
} else {
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
msleep(10);
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
msleep(10);
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1);
+ if (ir->ir.ir_type == IR_TYPE_RC5) {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 1);
- msleep(10);
+ msleep(10);
- dprintk("read data=%02x\n", buf[0]);
- if (rc < 0)
- return rc;
+ dprintk("read data=%02x\n", buf[0]);
+ if (rc < 0)
+ return rc;
- poll_result->rc_data[0] = buf[0];
+ poll_result->rc_data = buf[0];
+ } else {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+
+ msleep(10);
+
+ dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
+ if (rc < 0)
+ return rc;
+
+ poll_result->rc_data = buf[0] | buf[1] << 8;
+ }
+ if ((poll_result->rc_data & 0x00ff) != 0xff)
+ ir->key = 1;
}
return 0;
}
return;
}
- dprintk("ir->get_key result data=%02x %02x\n",
- poll_result.rc_data[0], poll_result.rc_data[1]);
+ dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
- if (poll_result.rc_data[0] != 0xff && ir->key == 1) {
+ if (ir->key) {
ir_input_keydown(ir->input->input_dev, &ir->ir,
- poll_result.rc_data[0] | poll_result.rc_data[1] << 8);
+ (u32)poll_result.rc_data);
ir_input_nokey(ir->input->input_dev, &ir->ir);
ir->key = 0;
{
int ret = 0;
- blocking_notifier_chain_register(&xenstore_chain, nb);
+ if (xenstored_ready > 0)
+ ret = nb->notifier_call(nb, 0, NULL);
+ else
+ blocking_notifier_chain_register(&xenstore_chain, nb);
return ret;
}
void xenbus_probe(struct work_struct *unused)
{
- BUG_ON((xenstored_ready <= 0));
+ xenstored_ready = 1;
/* Enumerate devices in xenstore and watch for changes. */
xenbus_probe_devices(&xenbus_frontend);
xen_store_evtchn = xen_start_info->store_evtchn;
xen_store_mfn = xen_start_info->store_mfn;
xen_store_interface = mfn_to_virt(xen_store_mfn);
+ xenstored_ready = 1;
}
- xenstored_ready = 1;
}
/* Initialize the interface to xenstore. */
if (!dump_write(file, dump_start, dump_size))
goto end_coredump;
}
-/* Finally dump the task struct. Not be used by gdb, but could be useful */
- set_fs(KERNEL_DS);
- if (!dump_write(file, current, sizeof(*current)))
- goto end_coredump;
end_coredump:
set_fs(fs);
return has_dumped;
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
- int seq = le32_to_cpu(grant->seq);
+ unsigned seq = le32_to_cpu(grant->seq);
+ unsigned issue_seq = le32_to_cpu(grant->issue_seq);
int newcaps = le32_to_cpu(grant->caps);
int issued, implemented, used, wanted, dirty;
u64 size = le64_to_cpu(grant->size);
int revoked_rdcache = 0;
int queue_invalidate = 0;
- dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
- inode, cap, mds, seq, ceph_cap_string(newcaps));
+ dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n",
+ inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps));
dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
inode->i_size);
}
cap->seq = seq;
+ cap->issue_seq = issue_seq;
/* file layout may have changed */
ci->i_layout = grant->layout;
if (op == CEPH_CAP_OP_IMPORT)
__queue_cap_release(session, vino.ino, cap_id,
mseq, seq);
-
- /*
- * send any full release message to try to move things
- * along for the mds (who clearly thinks we still have this
- * cap).
- */
- ceph_add_cap_releases(mdsc, session);
- ceph_send_cap_releases(mdsc, session);
- goto done;
+ goto flush_cap_releases;
}
/* these will work even if we don't have a cap yet */
dout(" no cap on %p ino %llx.%llx from mds%d\n",
inode, ceph_ino(inode), ceph_snap(inode), mds);
spin_unlock(&inode->i_lock);
- goto done;
+ goto flush_cap_releases;
}
/* note that each of these drops i_lock for us */
ceph_cap_op_name(op));
}
+ goto done;
+
+flush_cap_releases:
+ /*
+ * send any full release message to try to move things
+ * along for the mds (who clearly thinks we still have this
+ * cap).
+ */
+ ceph_add_cap_releases(mdsc, session);
+ ceph_send_cap_releases(mdsc, session);
+
done:
mutex_unlock(&session->s_mutex);
done_unlocked:
static int ceph_encode_fh(struct dentry *dentry, u32 *rawfh, int *max_len,
int connectable)
{
+ int type;
struct ceph_nfs_fh *fh = (void *)rawfh;
struct ceph_nfs_confh *cfh = (void *)rawfh;
struct dentry *parent = dentry->d_parent;
struct inode *inode = dentry->d_inode;
- int type;
+ int connected_handle_length = sizeof(*cfh)/4;
+ int handle_length = sizeof(*fh)/4;
/* don't re-export snaps */
if (ceph_snap(inode) != CEPH_NOSNAP)
return -EINVAL;
- if (*max_len >= sizeof(*cfh)) {
+ if (*max_len >= connected_handle_length) {
dout("encode_fh %p connectable\n", dentry);
cfh->ino = ceph_ino(dentry->d_inode);
cfh->parent_ino = ceph_ino(parent->d_inode);
cfh->parent_name_hash = parent->d_name.hash;
- *max_len = sizeof(*cfh);
+ *max_len = connected_handle_length;
type = 2;
- } else if (*max_len > sizeof(*fh)) {
- if (connectable)
- return -ENOSPC;
+ } else if (*max_len >= handle_length) {
+ if (connectable) {
+ *max_len = connected_handle_length;
+ return 255;
+ }
dout("encode_fh %p\n", dentry);
fh->ino = ceph_ino(dentry->d_inode);
- *max_len = sizeof(*fh);
+ *max_len = handle_length;
type = 1;
} else {
- return -ENOSPC;
+ *max_len = handle_length;
+ return 255;
}
return type;
}
* start_request so that a tid has been assigned.
*/
spin_lock(&ci->i_unsafe_lock);
- list_add(&ci->i_unsafe_writes, &req->r_unsafe_item);
+ list_add(&req->r_unsafe_item, &ci->i_unsafe_writes);
spin_unlock(&ci->i_unsafe_lock);
ceph_get_cap_refs(ci, CEPH_CAP_FILE_WR);
}
*/
static void __cancel_request(struct ceph_osd_request *req)
{
- if (req->r_sent) {
+ if (req->r_sent && req->r_osd) {
ceph_con_revoke(&req->r_osd->o_con, req->r_request);
req->r_sent = 0;
}
small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
void **request_buf)
{
- int rc = 0;
+ int rc;
rc = cifs_reconnect_tcon(tcon, smb_command);
if (rc)
if (tcon != NULL)
cifs_stats_inc(&tcon->num_smbs_sent);
- return rc;
+ return 0;
}
int
/* If the return code is zero, this function must fill in request_buf pointer */
static int
-smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
- void **request_buf /* returned */ ,
- void **response_buf /* returned */ )
+__smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
+ void **request_buf, void **response_buf)
{
- int rc = 0;
-
- rc = cifs_reconnect_tcon(tcon, smb_command);
- if (rc)
- return rc;
-
*request_buf = cifs_buf_get();
if (*request_buf == NULL) {
/* BB should we add a retry in here if not a writepage? */
if (tcon != NULL)
cifs_stats_inc(&tcon->num_smbs_sent);
- return rc;
+ return 0;
+}
+
+/* If the return code is zero, this function must fill in request_buf pointer */
+static int
+smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
+ void **request_buf, void **response_buf)
+{
+ int rc;
+
+ rc = cifs_reconnect_tcon(tcon, smb_command);
+ if (rc)
+ return rc;
+
+ return __smb_init(smb_command, wct, tcon, request_buf, response_buf);
+}
+
+static int
+smb_init_no_reconnect(int smb_command, int wct, struct cifsTconInfo *tcon,
+ void **request_buf, void **response_buf)
+{
+ if (tcon->ses->need_reconnect || tcon->need_reconnect)
+ return -EHOSTDOWN;
+
+ return __smb_init(smb_command, wct, tcon, request_buf, response_buf);
}
static int validate_t2(struct smb_t2_rsp *pSMB)
cFYI(1, "In QFSUnixInfo");
QFSUnixRetry:
- rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
- (void **) &pSMBr);
+ rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon,
+ (void **) &pSMB, (void **) &pSMBr);
if (rc)
return rc;
cFYI(1, "In SETFSUnixInfo");
SETFSUnixRetry:
/* BB switch to small buf init to save memory */
- rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
- (void **) &pSMBr);
+ rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon,
+ (void **) &pSMB, (void **) &pSMBr);
if (rc)
return rc;
inode->i_flags |= S_NOATIME | S_NOCMTIME;
if (inode->i_state & I_NEW) {
inode->i_ino = hash;
+ if (S_ISREG(inode->i_mode))
+ inode->i_data.backing_dev_info = sb->s_bdi;
#ifdef CONFIG_CIFS_FSCACHE
/* initialize per-inode cache cookie pointer */
CIFS_I(inode)->fscache = NULL;
fail:
return;
}
+
+/*
+ * Core dumping helper functions. These are the only things you should
+ * do on a core-file: use only these functions to write out all the
+ * necessary info.
+ */
+int dump_write(struct file *file, const void *addr, int nr)
+{
+ return access_ok(VERIFY_READ, addr, nr) && file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+}
+
+int dump_seek(struct file *file, loff_t off)
+{
+ int ret = 1;
+
+ if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
+ if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
+ return 0;
+ } else {
+ char *buf = (char *)get_zeroed_page(GFP_KERNEL);
+
+ if (!buf)
+ return 0;
+ while (off > 0) {
+ unsigned long n = off;
+
+ if (n > PAGE_SIZE)
+ n = PAGE_SIZE;
+ if (!dump_write(file, buf, n)) {
+ ret = 0;
+ break;
+ }
+ off -= n;
+ }
+ free_page((unsigned long)buf);
+ }
+ return ret;
+}
unsigned nr_pages;
unsigned long length;
loff_t pg_first; /* keep 64bit also in 32-arches */
+ bool read_4_write; /* This means two things: that the read is sync
+ * And the pages should not be unlocked.
+ */
};
static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
pcol->nr_pages = 0;
pcol->length = 0;
pcol->pg_first = -1;
+ pcol->read_4_write = false;
}
static void _pcol_reset(struct page_collect *pcol)
if (PageError(page))
ClearPageError(page);
- unlock_page(page);
+ if (!pcol->read_4_write)
+ unlock_page(page);
EXOFS_DBGMSG("readpage_strip(0x%lx, 0x%lx) empty page,"
" splitting\n", inode->i_ino, page->index);
/* readpage_strip might call read_exec(,is_sync==false) at several
* places but not if we have a single page.
*/
+ pcol.read_4_write = is_sync;
ret = readpage_strip(&pcol, page);
if (ret) {
EXOFS_ERR("_readpage => %d\n", ret);
static inline struct backing_dev_info *inode_to_bdi(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
- struct backing_dev_info *bdi = inode->i_mapping->backing_dev_info;
- /*
- * For inodes on standard filesystems, we use superblock's bdi. For
- * inodes on virtual filesystems, we want to use inode mapping's bdi
- * because they can possibly point to something useful (think about
- * block_dev filesystem).
- */
- if (sb->s_bdi && sb->s_bdi != &noop_backing_dev_info) {
- /* Some device inodes could play dirty tricks. Catch them... */
- WARN(bdi != sb->s_bdi && bdi_cap_writeback_dirty(bdi),
- "Dirtiable inode bdi %s != sb bdi %s\n",
- bdi->name, sb->s_bdi->name);
- return sb->s_bdi;
- }
- return bdi;
+ if (strcmp(sb->s_type->name, "bdev") == 0)
+ return inode->i_mapping->backing_dev_info;
+
+ return sb->s_bdi;
}
static void bdi_queue_work(struct backing_dev_info *bdi,
loff_t file_size;
unsigned int num;
unsigned int offset;
- size_t total_len;
+ size_t total_len = 0;
req = fuse_get_req(fc);
if (IS_ERR(req))
static inline void
fh_unlock(struct svc_fh *fhp)
{
- BUG_ON(!fhp->fh_dentry);
-
if (fhp->fh_locked) {
fill_post_wcc(fhp);
mutex_unlock(&fhp->fh_dentry->d_inode->i_mutex);
source "fs/notify/dnotify/Kconfig"
source "fs/notify/inotify/Kconfig"
-source "fs/notify/fanotify/Kconfig"
+#source "fs/notify/fanotify/Kconfig"
}
/* Fast symlinks can't be large */
- len = strlen(target);
+ len = strnlen(target, ocfs2_fast_symlink_chars(inode->i_sb));
link = kzalloc(len + 1, GFP_NOFS);
if (!link) {
status = -ENOMEM;
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
ONE("personality", S_IRUSR, proc_pid_personality),
- INF("limits", S_IRUSR, proc_pid_limits),
+ INF("limits", S_IRUGO, proc_pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
#endif
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
ONE("personality", S_IRUSR, proc_pid_personality),
- INF("limits", S_IRUSR, proc_pid_limits),
+ INF("limits", S_IRUGO, proc_pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
#endif
int reiserfs_unpack(struct inode *inode, struct file *filp)
{
int retval = 0;
+ int depth;
int index;
struct page *page;
struct address_space *mapping;
/* we need to make sure nobody is changing the file size beneath
** us
*/
- mutex_lock(&inode->i_mutex);
- reiserfs_write_lock(inode->i_sb);
+ reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
+ depth = reiserfs_write_lock_once(inode->i_sb);
write_from = inode->i_size & (blocksize - 1);
/* if we are on a block boundary, we are already unpacked. */
out:
mutex_unlock(&inode->i_mutex);
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
return retval;
}
xfs_perag_put(pag);
}
-void
-__xfs_inode_clear_reclaim_tag(
- xfs_mount_t *mp,
+STATIC void
+__xfs_inode_clear_reclaim(
xfs_perag_t *pag,
xfs_inode_t *ip)
{
- radix_tree_tag_clear(&pag->pag_ici_root,
- XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
pag->pag_ici_reclaimable--;
if (!pag->pag_ici_reclaimable) {
/* clear the reclaim tag from the perag radix tree */
}
}
+void
+__xfs_inode_clear_reclaim_tag(
+ xfs_mount_t *mp,
+ xfs_perag_t *pag,
+ xfs_inode_t *ip)
+{
+ radix_tree_tag_clear(&pag->pag_ici_root,
+ XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+ __xfs_inode_clear_reclaim(pag, ip);
+}
+
/*
* Inodes in different states need to be treated differently, and the return
* value of xfs_iflush is not sufficient to get this right. The following table
if (!radix_tree_delete(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
ASSERT(0);
+ __xfs_inode_clear_reclaim(pag, ip);
write_unlock(&pag->pag_ici_lock);
/*
new_ctx = kmem_zalloc(sizeof(*new_ctx), KM_SLEEP|KM_NOFS);
new_ctx->ticket = xlog_cil_ticket_alloc(log);
- /* lock out transaction commit, but don't block on background push */
+ /*
+ * Lock out transaction commit, but don't block for background pushes
+ * unless we are well over the CIL space limit. See the definition of
+ * XLOG_CIL_HARD_SPACE_LIMIT() for the full explanation of the logic
+ * used here.
+ */
if (!down_write_trylock(&cil->xc_ctx_lock)) {
- if (!push_seq)
+ if (!push_seq &&
+ cil->xc_ctx->space_used < XLOG_CIL_HARD_SPACE_LIMIT(log))
goto out_free_ticket;
down_write(&cil->xc_ctx_lock);
}
goto out_skip;
/* check for a previously pushed seqeunce */
- if (push_seq < cil->xc_ctx->sequence)
+ if (push_seq && push_seq < cil->xc_ctx->sequence)
goto out_skip;
/*
};
/*
- * The amount of log space we should the CIL to aggregate is difficult to size.
- * Whatever we chose we have to make we can get a reservation for the log space
- * effectively, that it is large enough to capture sufficient relogging to
- * reduce log buffer IO significantly, but it is not too large for the log or
- * induces too much latency when writing out through the iclogs. We track both
- * space consumed and the number of vectors in the checkpoint context, so we
- * need to decide which to use for limiting.
+ * The amount of log space we allow the CIL to aggregate is difficult to size.
+ * Whatever we choose, we have to make sure we can get a reservation for the
+ * log space effectively, that it is large enough to capture sufficient
+ * relogging to reduce log buffer IO significantly, but it is not too large for
+ * the log or induces too much latency when writing out through the iclogs. We
+ * track both space consumed and the number of vectors in the checkpoint
+ * context, so we need to decide which to use for limiting.
*
* Every log buffer we write out during a push needs a header reserved, which
* is at least one sector and more for v2 logs. Hence we need a reservation of
* checkpoint transaction ticket is specific to the checkpoint context, rather
* than the CIL itself.
*
- * With dynamic reservations, we can basically make up arbitrary limits for the
- * checkpoint size so long as they don't violate any other size rules. Hence
- * the initial maximum size for the checkpoint transaction will be set to a
- * quarter of the log or 8MB, which ever is smaller. 8MB is an arbitrary limit
- * right now based on the latency of writing out a large amount of data through
- * the circular iclog buffers.
+ * With dynamic reservations, we can effectively make up arbitrary limits for
+ * the checkpoint size so long as they don't violate any other size rules.
+ * Recovery imposes a rule that no transaction exceed half the log, so we are
+ * limited by that. Furthermore, the log transaction reservation subsystem
+ * tries to keep 25% of the log free, so we need to keep below that limit or we
+ * risk running out of free log space to start any new transactions.
+ *
+ * In order to keep background CIL push efficient, we will set a lower
+ * threshold at which background pushing is attempted without blocking current
+ * transaction commits. A separate, higher bound defines when CIL pushes are
+ * enforced to ensure we stay within our maximum checkpoint size bounds.
+ * threshold, yet give us plenty of space for aggregation on large logs.
*/
-
-#define XLOG_CIL_SPACE_LIMIT(log) \
- (min((log->l_logsize >> 2), (8 * 1024 * 1024)))
+#define XLOG_CIL_SPACE_LIMIT(log) (log->l_logsize >> 3)
+#define XLOG_CIL_HARD_SPACE_LIMIT(log) (3 * (log->l_logsize >> 4))
/*
* The reservation head lsn is not made up of a cycle number and block number.
extern u8 acpi_gbl_permanent_mmap;
/*
- * Globals that are publically available, allowing for
+ * Globals that are publicly available, allowing for
* run time configuration
*/
extern u32 acpi_dbg_level;
struct kref refcount;
/** Handle count of this object. Each handle also holds a reference */
- struct kref handlecount;
+ atomic_t handle_count; /* number of handles on this object */
/** Related drm device */
struct drm_device *dev;
*/
int (*gem_init_object) (struct drm_gem_object *obj);
void (*gem_free_object) (struct drm_gem_object *obj);
- void (*gem_free_object_unlocked) (struct drm_gem_object *obj);
/* vga arb irq handler */
void (*vgaarb_irq)(struct drm_device *dev, bool state);
extern int drm_mmap(struct file *filp, struct vm_area_struct *vma);
extern int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma);
extern void drm_vm_open_locked(struct vm_area_struct *vma);
+extern void drm_vm_close_locked(struct vm_area_struct *vma);
extern resource_size_t drm_core_get_map_ofs(struct drm_local_map * map);
extern resource_size_t drm_core_get_reg_ofs(struct drm_device *dev);
extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait);
void drm_gem_destroy(struct drm_device *dev);
void drm_gem_object_release(struct drm_gem_object *obj);
void drm_gem_object_free(struct kref *kref);
-void drm_gem_object_free_unlocked(struct kref *kref);
struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
size_t size);
int drm_gem_object_init(struct drm_device *dev,
struct drm_gem_object *obj, size_t size);
-void drm_gem_object_handle_free(struct kref *kref);
+void drm_gem_object_handle_free(struct drm_gem_object *obj);
void drm_gem_vm_open(struct vm_area_struct *vma);
void drm_gem_vm_close(struct vm_area_struct *vma);
int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
static inline void
drm_gem_object_unreference_unlocked(struct drm_gem_object *obj)
{
- if (obj != NULL)
- kref_put(&obj->refcount, drm_gem_object_free_unlocked);
+ if (obj != NULL) {
+ struct drm_device *dev = obj->dev;
+ mutex_lock(&dev->struct_mutex);
+ kref_put(&obj->refcount, drm_gem_object_free);
+ mutex_unlock(&dev->struct_mutex);
+ }
}
int drm_gem_handle_create(struct drm_file *file_priv,
drm_gem_object_handle_reference(struct drm_gem_object *obj)
{
drm_gem_object_reference(obj);
- kref_get(&obj->handlecount);
+ atomic_inc(&obj->handle_count);
}
static inline void
if (obj == NULL)
return;
+ if (atomic_read(&obj->handle_count) == 0)
+ return;
/*
* Must bump handle count first as this may be the last
* ref, in which case the object would disappear before we
* checked for a name
*/
- kref_put(&obj->handlecount, drm_gem_object_handle_free);
+ if (atomic_dec_and_test(&obj->handle_count))
+ drm_gem_object_handle_free(obj);
drm_gem_object_unreference(obj);
}
if (obj == NULL)
return;
+ if (atomic_read(&obj->handle_count) == 0)
+ return;
+
/*
* Must bump handle count first as this may be the last
* ref, in which case the object would disappear before we
* checked for a name
*/
- kref_put(&obj->handlecount, drm_gem_object_handle_free);
+
+ if (atomic_dec_and_test(&obj->handle_count))
+ drm_gem_object_handle_free(obj);
drm_gem_object_unreference_unlocked(obj);
}
{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
- {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
{0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
{0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
atomic_t reserved;
-
/**
* Members protected by the bo::lock
+ * In addition, setting sync_obj to anything else
+ * than NULL requires bo::reserved to be held. This allows for
+ * checking NULL while reserved but not holding bo::lock.
*/
void *sync_obj_arg;
header-y += ext2_fs.h
header-y += fadvise.h
header-y += falloc.h
-header-y += fanotify.h
header-y += fb.h
header-y += fcntl.h
header-y += fd.h
* These are the only things you should do on a core-file: use only these
* functions to write out all the necessary info.
*/
-static inline int dump_write(struct file *file, const void *addr, int nr)
-{
- return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
-
-static inline int dump_seek(struct file *file, loff_t off)
-{
- int ret = 1;
-
- if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
- if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
- return 0;
- } else {
- char *buf = (char *)get_zeroed_page(GFP_KERNEL);
-
- if (!buf)
- return 0;
- while (off > 0) {
- unsigned long n = off;
-
- if (n > PAGE_SIZE)
- n = PAGE_SIZE;
- if (!dump_write(file, buf, n)) {
- ret = 0;
- break;
- }
- off -= n;
- }
- free_page((unsigned long)buf);
- }
- return ret;
-}
+extern int dump_write(struct file *file, const void *addr, int nr);
+extern int dump_seek(struct file *file, loff_t off);
#endif /* _LINUX_COREDUMP_H */
#define CPUIDLE_FLAG_BALANCED (0x40) /* medium latency, moderate savings */
#define CPUIDLE_FLAG_DEEP (0x80) /* high latency, large savings */
#define CPUIDLE_FLAG_IGNORE (0x100) /* ignore during this idle period */
+#define CPUIDLE_FLAG_TLB_FLUSHED (0x200) /* tlb will be flushed */
#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
}
-static unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
{
return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
}
struct elevator_type *elevator_type;
struct mutex sysfs_lock;
struct hlist_head *hash;
+ unsigned int registered:1;
};
/*
#ifdef CONFIG_GENERIC_BUG
-int module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+void module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
struct module *);
void module_bug_cleanup(struct module *);
#else /* !CONFIG_GENERIC_BUG */
-static inline int module_bug_finalize(const Elf_Ehdr *hdr,
+static inline void module_bug_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *mod)
{
- return 0;
}
static inline void module_bug_cleanup(struct module *mod) {}
#endif /* CONFIG_GENERIC_BUG */
* Makes rcu_dereference_check() do the dirty work.
*/
#define rcu_dereference_bh(p) \
- rcu_dereference_check(p, rcu_read_lock_bh_held())
+ rcu_dereference_check(p, rcu_read_lock_bh_held() || irqs_disabled())
/**
* rcu_dereference_sched - fetch RCU-protected pointer, checking for RCU-sched
(wait)->private = current; \
(wait)->func = autoremove_wake_function; \
INIT_LIST_HEAD(&(wait)->task_list); \
+ (wait)->flags = 0; \
} while (0)
/**
/* for userland buffer */
int offset;
+ size_t size;
struct page **pages;
/* for kernel buffers */
{
struct sk_buff *skb;
+ release_sock(sk);
if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
skb_reserve(skb, BT_SKB_RESERVE);
bt_cb(skb)->incoming = 0;
}
+ lock_sock(sk);
+
+ if (!skb && *err)
+ return NULL;
+
+ *err = sock_error(sk);
+ if (*err)
+ goto out;
+
+ if (sk->sk_shutdown) {
+ *err = -ECONNRESET;
+ goto out;
+ }
return skb;
+
+out:
+ kfree_skb(skb);
+ return NULL;
}
int bt_err(__u16 code);
{
struct semid_ds out;
+ memset(&out, 0, sizeof(out));
+
ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
out.sem_otime = in->sem_otime;
n = setup_sgl_buf(sgl, fifo->data + off, nents, l);
n += setup_sgl_buf(sgl + n, fifo->data, nents - n, len - l);
- if (n)
- sg_mark_end(sgl + n - 1);
return n;
}
{
struct module *mod = _mod;
list_del(&mod->list);
+ module_bug_cleanup(mod);
return 0;
}
if (err < 0)
goto ddebug;
+ module_bug_finalize(info.hdr, info.sechdrs, mod);
list_add_rcu(&mod->list, &modules);
mutex_unlock(&module_mutex);
mutex_lock(&module_mutex);
/* Unlink carefully: kallsyms could be walking list. */
list_del_rcu(&mod->list);
+ module_bug_cleanup(mod);
+
ddebug:
if (!mod->taints)
dynamic_debug_remove(info.debug);
static int perf_event_period(struct perf_event *event, u64 __user *arg)
{
struct perf_event_context *ctx = event->ctx;
- unsigned long size;
int ret = 0;
u64 value;
if (!event->attr.sample_period)
return -EINVAL;
- size = copy_from_user(&value, arg, sizeof(value));
- if (size != sizeof(value))
+ if (copy_from_user(&value, arg, sizeof(value)))
return -EFAULT;
if (!value)
err |= __put_user(from->si_addr, &to->si_addr);
#ifdef __ARCH_SI_TRAPNO
err |= __put_user(from->si_trapno, &to->si_trapno);
+#endif
+#ifdef BUS_MCEERR_AO
+ /*
+ * Other callers might not initialize the si_lsb field,
+ * so check explicitely for the right codes here.
+ */
+ if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+ err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
#endif
break;
case __SI_CHLD:
EXPORT_SYMBOL_GPL(smp_call_function_any);
/**
- * __smp_call_function_single(): Run a function on another CPU
+ * __smp_call_function_single(): Run a function on a specific CPU
* @cpu: The CPU to run on.
* @data: Pre-allocated and setup data structure
+ * @wait: If true, wait until function has completed on specified CPU.
*
* Like smp_call_function_single(), but allow caller to pass in a
* pre-allocated data structure. Useful for embedding @data inside
void __smp_call_function_single(int cpu, struct call_single_data *data,
int wait)
{
- csd_lock(data);
+ unsigned int this_cpu;
+ unsigned long flags;
+ this_cpu = get_cpu();
/*
* Can deadlock when called with interrupts disabled.
* We allow cpu's that are not yet online though, as no one else can
WARN_ON_ONCE(cpu_online(smp_processor_id()) && wait && irqs_disabled()
&& !oops_in_progress);
- generic_exec_single(cpu, data, wait);
+ if (cpu == this_cpu) {
+ local_irq_save(flags);
+ data->func(data->info);
+ local_irq_restore(flags);
+ } else {
+ csd_lock(data);
+ generic_exec_single(cpu, data, wait);
+ }
+ put_cpu();
}
/**
kbuf[left] = 0;
}
- for (; left && vleft--; i++, min++, max++, first=0) {
+ for (; left && vleft--; i++, first = 0) {
unsigned long val;
if (write) {
#define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2))
/* Max number of timestamps that can fit on a page */
-#define RB_TIMESTAMPS_PER_PAGE (BUF_PAGE_SIZE / RB_LEN_TIME_STAMP)
+#define RB_TIMESTAMPS_PER_PAGE (BUF_PAGE_SIZE / RB_LEN_TIME_EXTEND)
int ring_buffer_print_page_header(struct trace_seq *s)
{
return NULL;
}
-int module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- struct module *mod)
+void module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *mod)
{
char *secstrings;
unsigned int i;
* could potentially lead to deadlock and thus be counter-productive.
*/
list_add(&mod->bug_list, &module_bug_list);
-
- return 0;
}
void module_bug_cleanup(struct module *mod)
* element comparison is needed, so the client's cmp()
* routine can invoke cond_resched() periodically.
*/
- (*cmp)(priv, tail, tail);
+ (*cmp)(priv, tail->next, tail->next);
tail->next->prev = tail;
tail = tail->next;
if (!ptep)
goto out;
- if (pte_write(*ptep)) {
+ if (pte_write(*ptep) || pte_dirty(*ptep)) {
pte_t entry;
swapped = PageSwapCache(page);
set_pte_at(mm, addr, ptep, entry);
goto out_unlock;
}
- entry = pte_wrprotect(entry);
+ if (pte_dirty(entry))
+ set_page_dirty(page);
+ entry = pte_mkclean(pte_wrprotect(entry));
set_pte_at_notify(mm, addr, ptep, entry);
}
*orig_pte = *ptep;
static void mem_cgroup_threshold(struct mem_cgroup *memcg)
{
- __mem_cgroup_threshold(memcg, false);
- if (do_swap_account)
- __mem_cgroup_threshold(memcg, true);
+ while (memcg) {
+ __mem_cgroup_threshold(memcg, false);
+ if (do_swap_account)
+ __mem_cgroup_threshold(memcg, true);
+
+ memcg = parent_mem_cgroup(memcg);
+ }
}
static int compare_thresholds(const void *a, const void *b)
* signal.
*/
static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
- unsigned long pfn)
+ unsigned long pfn, struct page *page)
{
struct siginfo si;
int ret;
#ifdef __ARCH_SI_TRAPNO
si.si_trapno = trapno;
#endif
- si.si_addr_lsb = PAGE_SHIFT;
+ si.si_addr_lsb = compound_order(compound_head(page)) + PAGE_SHIFT;
/*
* Don't use force here, it's convenient if the signal
* can be temporarily blocked.
int nr;
do {
nr = shrink_slab(1000, GFP_KERNEL, 1000);
- if (page_count(p) == 0)
+ if (page_count(p) == 1)
break;
} while (nr > 10);
}
* wrong earlier.
*/
static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno,
- int fail, unsigned long pfn)
+ int fail, struct page *page, unsigned long pfn)
{
struct to_kill *tk, *next;
* process anyways.
*/
else if (kill_proc_ao(tk->tsk, tk->addr, trapno,
- pfn) < 0)
+ pfn, page) < 0)
printk(KERN_ERR
"MCE %#lx: Cannot send advisory machine check signal to %s:%d\n",
pfn, tk->tsk->comm, tk->tsk->pid);
* any accesses to the poisoned memory.
*/
kill_procs_ao(&tokill, !!PageDirty(hpage), trapno,
- ret != SWAP_SUCCESS, pfn);
+ ret != SWAP_SUCCESS, p, pfn);
return ret;
}
if (!table)
panic("Failed to allocate %s hash table\n", tablename);
- printk(KERN_INFO "%s hash table entries: %d (order: %d, %lu bytes)\n",
+ printk(KERN_INFO "%s hash table entries: %ld (order: %d, %lu bytes)\n",
tablename,
- (1U << log2qty),
+ (1UL << log2qty),
ilog2(size) - PAGE_SHIFT,
size);
unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
{
if (PageAnon(page)) {
- if (vma->anon_vma->root != page_anon_vma(page)->root)
+ struct anon_vma *page__anon_vma = page_anon_vma(page);
+ /*
+ * Note: swapoff's unuse_vma() is more efficient with this
+ * check, and needs it to match anon_vma when KSM is active.
+ */
+ if (!vma->anon_vma || !page__anon_vma ||
+ vma->anon_vma->root != page__anon_vma->root)
return -EFAULT;
} else if (page->mapping && !(vma->vm_flags & VM_NONLINEAR)) {
if (!vma->vm_file ||
if (vlan_dev)
skb->dev = vlan_dev;
- else if (vlan_id)
- goto drop;
+ else if (vlan_id) {
+ if (!(skb->dev->flags & IFF_PROMISC))
+ goto drop;
+ skb->pkt_type = PACKET_OTHERHOST;
+ }
return (polling ? netif_receive_skb(skb) : netif_rx(skb));
if (vlan_dev)
skb->dev = vlan_dev;
- else if (vlan_id)
- goto drop;
+ else if (vlan_id) {
+ if (!(skb->dev->flags & IFF_PROMISC))
+ goto drop;
+ skb->pkt_type = PACKET_OTHERHOST;
+ }
for (p = napi->gro_list; p; p = p->next) {
NAPI_GRO_CB(p)->same_flow =
eg->packets_rcvd++;
mpc->eg_ops->put(eg);
- memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
+ memset(ATM_SKB(new_skb), 0, sizeof(struct atm_skb_data));
netif_rx(new_skb);
}
static void l2cap_streaming_send(struct sock *sk)
{
- struct sk_buff *skb, *tx_skb;
+ struct sk_buff *skb;
struct l2cap_pinfo *pi = l2cap_pi(sk);
u16 control, fcs;
- while ((skb = sk->sk_send_head)) {
- tx_skb = skb_clone(skb, GFP_ATOMIC);
-
- control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+ while ((skb = skb_dequeue(TX_QUEUE(sk)))) {
+ control = get_unaligned_le16(skb->data + L2CAP_HDR_SIZE);
control |= pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT;
- put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
+ put_unaligned_le16(control, skb->data + L2CAP_HDR_SIZE);
if (pi->fcs == L2CAP_FCS_CRC16) {
- fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2);
- put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2);
+ fcs = crc16(0, (u8 *)skb->data, skb->len - 2);
+ put_unaligned_le16(fcs, skb->data + skb->len - 2);
}
- l2cap_do_send(sk, tx_skb);
+ l2cap_do_send(sk, skb);
pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
-
- if (skb_queue_is_last(TX_QUEUE(sk), skb))
- sk->sk_send_head = NULL;
- else
- sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb);
-
- skb = skb_dequeue(TX_QUEUE(sk));
- kfree_skb(skb);
}
}
switch (optname) {
case L2CAP_OPTIONS:
+ if (sk->sk_state == BT_CONNECTED) {
+ err = -EINVAL;
+ break;
+ }
+
opts.imtu = l2cap_pi(sk)->imtu;
opts.omtu = l2cap_pi(sk)->omtu;
opts.flush_to = l2cap_pi(sk)->flush_to;
case L2CAP_CONF_MTU:
if (val < L2CAP_DEFAULT_MIN_MTU) {
*result = L2CAP_CONF_UNACCEPT;
- pi->omtu = L2CAP_DEFAULT_MIN_MTU;
+ pi->imtu = L2CAP_DEFAULT_MIN_MTU;
} else
- pi->omtu = val;
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
+ pi->imtu = val;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
break;
case L2CAP_CONF_FLUSH_TO:
return 0;
}
+static inline void set_default_fcs(struct l2cap_pinfo *pi)
+{
+ /* FCS is enabled only in ERTM or streaming mode, if one or both
+ * sides request it.
+ */
+ if (pi->mode != L2CAP_MODE_ERTM && pi->mode != L2CAP_MODE_STREAMING)
+ pi->fcs = L2CAP_FCS_NONE;
+ else if (!(pi->conf_state & L2CAP_CONF_NO_FCS_RECV))
+ pi->fcs = L2CAP_FCS_CRC16;
+}
+
static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
{
struct l2cap_conf_req *req = (struct l2cap_conf_req *) data;
if (!sk)
return -ENOENT;
- if (sk->sk_state != BT_CONFIG) {
- struct l2cap_cmd_rej rej;
-
- rej.reason = cpu_to_le16(0x0002);
- l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ,
- sizeof(rej), &rej);
+ if (sk->sk_state == BT_DISCONN)
goto unlock;
- }
/* Reject if config buffer is too small. */
len = cmd_len - sizeof(*req);
goto unlock;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
- l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
- l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+ set_default_fcs(l2cap_pi(sk));
sk->sk_state = BT_CONNECTED;
l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
- l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
- l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+ set_default_fcs(l2cap_pi(sk));
sk->sk_state = BT_CONNECTED;
l2cap_pi(sk)->next_tx_seq = 0;
static void rfcomm_sk_state_change(struct rfcomm_dlc *d, int err)
{
struct sock *sk = d->owner, *parent;
+ unsigned long flags;
+
if (!sk)
return;
BT_DBG("dlc %p state %ld err %d", d, d->state, err);
+ local_irq_save(flags);
bh_lock_sock(sk);
if (err)
}
bh_unlock_sock(sk);
+ local_irq_restore(flags);
if (parent && sock_flag(sk, SOCK_ZAPPED)) {
/* We have to drop DLC lock here, otherwise
long timeo;
int err;
int ifindex, headroom, tailroom;
+ unsigned int mtu;
struct net_device *dev;
lock_sock(sk);
cf_sk->sk.sk_state = CAIF_DISCONNECTED;
goto out;
}
- dev = dev_get_by_index(sock_net(sk), ifindex);
+
+ err = -ENODEV;
+ rcu_read_lock();
+ dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
+ if (!dev) {
+ rcu_read_unlock();
+ goto out;
+ }
cf_sk->headroom = LL_RESERVED_SPACE_EXTRA(dev, headroom);
+ mtu = dev->mtu;
+ rcu_read_unlock();
+
cf_sk->tailroom = tailroom;
- cf_sk->maxframe = dev->mtu - (headroom + tailroom);
- dev_put(dev);
+ cf_sk->maxframe = mtu - (headroom + tailroom);
if (cf_sk->maxframe < 1) {
- pr_warning("CAIF: %s(): CAIF Interface MTU too small (%d)\n",
- __func__, dev->mtu);
- err = -ENODEV;
+ pr_warning("CAIF: %s(): CAIF Interface MTU too small (%u)\n",
+ __func__, mtu);
goto out;
}
if (info.cmd == ETHTOOL_GRXCLSRLALL) {
if (info.rule_cnt > 0) {
if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
- rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
+ rule_buf = kzalloc(info.rule_cnt * sizeof(u32),
GFP_USER);
if (!rule_buf)
return -ENOMEM;
(KMALLOC_MAX_SIZE - sizeof(*indir)) / sizeof(*indir->ring_index))
return -ENOMEM;
full_size = sizeof(*indir) + sizeof(*indir->ring_index) * table_size;
- indir = kmalloc(full_size, GFP_USER);
+ indir = kzalloc(full_size, GFP_USER);
if (!indir)
return -ENOMEM;
gstrings.len = ret;
- data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
+ data = kzalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
if (!data)
return -ENOMEM;
if (regs.len > reglen)
regs.len = reglen;
- regbuf = kmalloc(reglen, GFP_USER);
+ regbuf = kzalloc(reglen, GFP_USER);
if (!regbuf)
return -ENOMEM;
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
sk->sk_write_pending++;
- sk_wait_event(sk, ¤t_timeo, !sk->sk_err &&
- !(sk->sk_shutdown & SEND_SHUTDOWN) &&
- sk_stream_memory_free(sk) &&
- vm_wait);
+ sk_wait_event(sk, ¤t_timeo, sk->sk_err ||
+ (sk->sk_shutdown & SEND_SHUTDOWN) ||
+ (sk_stream_memory_free(sk) &&
+ !vm_wait));
sk->sk_write_pending--;
if (vm_wait) {
config NET_IPGRE
tristate "IP: GRE tunnels over IP"
+ depends on IPV6 || IPV6=n
help
Tunneling means encapsulating data of one protocol type within
another protocol and sending it over a channel that understands the
If unsure, say Y.
config INET_LRO
- bool "Large Receive Offload (ipv4/tcp)"
+ tristate "Large Receive Offload (ipv4/tcp)"
default y
---help---
Support for Large Receive Offload (ipv4/tcp).
int mark = 0;
- if (len == 8 || IGMP_V2_SEEN(in_dev)) {
+ if (len == 8) {
if (ih->code == 0) {
/* Alas, old v1 router presents here. */
igmpv3_clear_delrec(in_dev);
} else if (len < 12) {
return; /* ignore bogus packet; freed by caller */
+ } else if (IGMP_V1_SEEN(in_dev)) {
+ /* This is a v3 query with v1 queriers present */
+ max_delay = IGMP_Query_Response_Interval;
+ group = 0;
+ } else if (IGMP_V2_SEEN(in_dev)) {
+ /* this is a v3 query with v2 queriers present;
+ * Interpretation of the max_delay code is problematic here.
+ * A real v2 host would use ih_code directly, while v3 has a
+ * different encoding. We use the v3 encoding as more likely
+ * to be intended in a v3 query.
+ */
+ max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE);
} else { /* v3 */
if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
return;
/* This function calculates a "timeout" which is equivalent to the timeout of a
* TCP connection after "boundary" unsuccessful, exponentially backed-off
- * retransmissions with an initial RTO of TCP_RTO_MIN.
+ * retransmissions with an initial RTO of TCP_RTO_MIN or TCP_TIMEOUT_INIT if
+ * syn_set flag is set.
*/
static bool retransmits_timed_out(struct sock *sk,
- unsigned int boundary)
+ unsigned int boundary,
+ bool syn_set)
{
unsigned int timeout, linear_backoff_thresh;
unsigned int start_ts;
+ unsigned int rto_base = syn_set ? TCP_TIMEOUT_INIT : TCP_RTO_MIN;
if (!inet_csk(sk)->icsk_retransmits)
return false;
else
start_ts = tcp_sk(sk)->retrans_stamp;
- linear_backoff_thresh = ilog2(TCP_RTO_MAX/TCP_RTO_MIN);
+ linear_backoff_thresh = ilog2(TCP_RTO_MAX/rto_base);
if (boundary <= linear_backoff_thresh)
- timeout = ((2 << boundary) - 1) * TCP_RTO_MIN;
+ timeout = ((2 << boundary) - 1) * rto_base;
else
- timeout = ((2 << linear_backoff_thresh) - 1) * TCP_RTO_MIN +
+ timeout = ((2 << linear_backoff_thresh) - 1) * rto_base +
(boundary - linear_backoff_thresh) * TCP_RTO_MAX;
return (tcp_time_stamp - start_ts) >= timeout;
{
struct inet_connection_sock *icsk = inet_csk(sk);
int retry_until;
- bool do_reset;
+ bool do_reset, syn_set = 0;
if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) {
if (icsk->icsk_retransmits)
dst_negative_advice(sk);
retry_until = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries;
+ syn_set = 1;
} else {
- if (retransmits_timed_out(sk, sysctl_tcp_retries1)) {
+ if (retransmits_timed_out(sk, sysctl_tcp_retries1, 0)) {
/* Black hole detection */
tcp_mtu_probing(icsk, sk);
retry_until = tcp_orphan_retries(sk, alive);
do_reset = alive ||
- !retransmits_timed_out(sk, retry_until);
+ !retransmits_timed_out(sk, retry_until, 0);
if (tcp_out_of_resources(sk, do_reset))
return 1;
}
}
- if (retransmits_timed_out(sk, retry_until)) {
+ if (retransmits_timed_out(sk, retry_until, syn_set)) {
/* Has it gone just too far? */
tcp_write_err(sk);
return 1;
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
}
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto, TCP_RTO_MAX);
- if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1))
+ if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1, 0))
__sk_dst_reset(sk);
out:;
* i.e. Path MTU discovery
*/
-void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
- struct net_device *dev, u32 pmtu)
+static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
+ struct net *net, u32 pmtu, int ifindex)
{
struct rt6_info *rt, *nrt;
- struct net *net = dev_net(dev);
int allfrag = 0;
- rt = rt6_lookup(net, daddr, saddr, dev->ifindex, 0);
+ rt = rt6_lookup(net, daddr, saddr, ifindex, 0);
if (rt == NULL)
return;
dst_release(&rt->dst);
}
+void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
+ struct net_device *dev, u32 pmtu)
+{
+ struct net *net = dev_net(dev);
+
+ /*
+ * RFC 1981 states that a node "MUST reduce the size of the packets it
+ * is sending along the path" that caused the Packet Too Big message.
+ * Since it's not possible in the general case to determine which
+ * interface was used to send the original packet, we update the MTU
+ * on the interface that will be used to send future packets. We also
+ * update the MTU on the interface that received the Packet Too Big in
+ * case the original packet was forced out that interface with
+ * SO_BINDTODEVICE or similar. This is the next best thing to the
+ * correct behaviour, which would be to update the MTU on all
+ * interfaces.
+ */
+ rt6_do_pmtu_disc(daddr, saddr, net, pmtu, 0);
+ rt6_do_pmtu_disc(daddr, saddr, net, pmtu, dev->ifindex);
+}
+
/*
* Misc support functions
*/
set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
+ del_timer_sync(&tid_tx->addba_resp_timer);
+
/*
* After this packets are no longer handed right through
* to the driver but are put onto tid_tx->pending instead,
struct net_device *prev_dev = NULL;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
- if (status->flag & RX_FLAG_INTERNAL_CMTR)
- goto out_free_skb;
-
if (skb_headroom(skb) < sizeof(*rthdr) &&
pskb_expand_head(skb, sizeof(*rthdr), 0, GFP_ATOMIC))
goto out_free_skb;
} else
goto out_free_skb;
- status->flag |= RX_FLAG_INTERNAL_CMTR;
return;
out_free_skb:
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
skb2->dev = prev_dev;
- netif_receive_skb(skb2);
+ netif_rx(skb2);
}
}
}
if (prev_dev) {
skb->dev = prev_dev;
- netif_receive_skb(skb);
+ netif_rx(skb);
skb = NULL;
}
rcu_read_unlock();
static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
{
struct pep_sock *pn = pep_sk(sk);
- struct pnpipehdr *hdr = pnp_hdr(skb);
+ struct pnpipehdr *hdr;
int wake = 0;
if (!pskb_may_pull(skb, sizeof(*hdr) + 4))
return -EINVAL;
+ hdr = pnp_hdr(skb);
if (hdr->data[0] != PN_PEP_TYPE_COMMON) {
LIMIT_NETDEBUG(KERN_DEBUG"Phonet unknown PEP type: %u\n",
(unsigned)hdr->data[0]);
int toff = off + key->off + (off2 & key->offmask);
__be32 *data, _data;
- if (skb_headroom(skb) + toff < 0)
+ if (skb_headroom(skb) + toff > INT_MAX)
goto out;
data = skb_header_pointer(skb, toff, 4, &_data);
id = ntohs(hmacs->hmac_ids[i]);
/* Check the id is in the supported range */
- if (id > SCTP_AUTH_HMAC_ID_MAX)
+ if (id > SCTP_AUTH_HMAC_ID_MAX) {
+ id = 0;
continue;
+ }
/* See is we support the id. Supported IDs have name and
* length fields set, so that we can allocated and use
* them. We can safely just check for name, for without the
* name, we can't allocate the TFM.
*/
- if (!sctp_hmac_list[id].hmac_name)
+ if (!sctp_hmac_list[id].hmac_name) {
+ id = 0;
continue;
+ }
break;
}
/* Walk through the addrs buffer and count the number of addresses. */
addr_buf = kaddrs;
while (walk_size < addrs_size) {
+ if (walk_size + sizeof(sa_family_t) > addrs_size) {
+ kfree(kaddrs);
+ return -EINVAL;
+ }
+
sa_addr = (struct sockaddr *)addr_buf;
af = sctp_get_af_specific(sa_addr->sa_family);
/* Walk through the addrs buffer and count the number of addresses. */
addr_buf = kaddrs;
while (walk_size < addrs_size) {
+ if (walk_size + sizeof(sa_family_t) > addrs_size) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
sa_addr = (union sctp_addr *)addr_buf;
af = sctp_get_af_specific(sa_addr->sa.sa_family);
- port = ntohs(sa_addr->v4.sin_port);
/* If the address family is not supported or if this address
* causes the address buffer to overflow return EINVAL.
goto out_free;
}
+ port = ntohs(sa_addr->v4.sin_port);
+
/* Save current address so we can work with it */
memcpy(&to, sa_addr, af->sockaddr_len);
{
int i;
unsigned int ret;
+ unsigned int nents;
struct scatterlist sg[10];
printk(KERN_INFO "DMA fifo test start\n");
* byte at the beginning, after the kfifo_skip().
*/
sg_init_table(sg, ARRAY_SIZE(sg));
- ret = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
- printk(KERN_INFO "DMA sgl entries: %d\n", ret);
- if (!ret) {
+ nents = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
+ printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+ if (!nents) {
/* fifo is full and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_in_prepare\n");
return -EIO;
/* receive data */
printk(KERN_INFO "scatterlist for receive:\n");
- for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
kfifo_dma_in_finish(&fifo, ret);
/* Prepare to transmit data, example: 8 bytes */
- ret = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
- printk(KERN_INFO "DMA sgl entries: %d\n", ret);
- if (!ret) {
+ nents = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
+ printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+ if (!nents) {
/* no data was available and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_out_prepare\n");
return -EIO;
}
printk(KERN_INFO "scatterlist for transmit:\n");
- for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
if (sym->name && !sym_is_choice_value(sym)) {
printf("CONFIG_%s\n", sym->name);
}
- } else {
+ } else if (input_mode != oldnoconfig) {
if (!conf_cnt++)
printf(_("*\n* Restart config...\n*\n"));
rootEntry = menu_get_parent_menu(menu);
struct symbol *sym;
struct property *prompt;
struct expr *dep;
- struct expr *dir_dep;
unsigned int flags;
char *help;
struct file *file;
void menu_add_dep(struct expr *dep)
{
current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep));
- current_entry->dir_dep = current_entry->dep;
}
void menu_set_type(int type)
for (menu = parent->list; menu; menu = menu->next)
menu_finalize(menu);
} else if (sym) {
- /* ignore inherited dependencies for dir_dep */
- sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep));
- sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr);
-
basedep = parent->prompt ? parent->prompt->visible.expr : NULL;
basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
basedep = expr_eliminate_dups(expr_transform(basedep));
parent->next = last_menu->next;
last_menu->next = NULL;
}
+
+ sym->dir_dep.expr = parent->dep;
}
for (menu = parent->list; menu; menu = menu->next) {
if (sym && sym_is_choice(sym) &&
}
}
calc_newval:
+#if 0
if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) {
fprintf(stderr, "warning: (");
expr_fprint(sym->rev_dep.expr, stderr);
expr_fprint(sym->dir_dep.expr, stderr);
fprintf(stderr, ")\n");
}
+#endif
newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri);
}
if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN)
/* max number of user-defined controls */
#define MAX_USER_CONTROLS 32
+#define MAX_CONTROL_COUNT 1028
struct snd_kctl_ioctl {
struct list_head list; /* list of all ioctls */
if (snd_BUG_ON(!control || !control->count))
return NULL;
+
+ if (control->count > MAX_CONTROL_COUNT)
+ return NULL;
+
kctl = kzalloc(sizeof(*kctl) + sizeof(struct snd_kcontrol_volatile) * control->count, GFP_KERNEL);
if (kctl == NULL) {
snd_printk(KERN_ERR "Cannot allocate control instance\n");
return 0;
}
#else /* !CONFIG_PROC_FS */
-static int proc_init(struct snd_akm4xxx *ak) {}
+static int proc_init(struct snd_akm4xxx *ak) { return 0; }
#endif
int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak)
case SND_DEV_DSP:
case SND_DEV_DSP16:
case SND_DEV_AUDIO:
- return audio_ioctl(dev, file, cmd, p);
+ ret = audio_ioctl(dev, file, cmd, p);
break;
case SND_DEV_MIDIN:
- return MIDIbuf_ioctl(dev, file, cmd, p);
+ ret = MIDIbuf_ioctl(dev, file, cmd, p);
break;
}
"HP dv6", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3061,
"HP dv6", STAC_HP_DV5), /* HP dv6-1110ax */
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x363e,
+ "HP DV6", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
"HP", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
# we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
# we depend the various files onto their directories.
DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
-$(DIRECTORY_DEPS): $(sort $(dir $(DIRECTORY_DEPS)))
+$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
# In the second step, we make a rule to actually create these directories
$(sort $(dir $(DIRECTORY_DEPS))):
$(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
#define cpu_relax() asm volatile("":::"memory")
#endif
+#ifdef __mips__
+#include "../../arch/mips/include/asm/unistd.h"
+#define rmb() asm volatile( \
+ ".set mips2\n\t" \
+ "sync\n\t" \
+ ".set mips0" \
+ : /* no output */ \
+ : /* no input */ \
+ : "memory")
+#define cpu_relax() asm volatile("" ::: "memory")
+#endif
+
#include <time.h>
#include <unistd.h>
#include <sys/types.h>
register_python_scripting(&python_scripting_unsupported_ops);
}
#else
-struct scripting_ops python_scripting_ops;
+extern struct scripting_ops python_scripting_ops;
void setup_python_scripting(void)
{
register_perl_scripting(&perl_scripting_unsupported_ops);
}
#else
-struct scripting_ops perl_scripting_ops;
+extern struct scripting_ops perl_scripting_ops;
void setup_perl_scripting(void)
{
switch (key) {
case 'a':
- if (browser->selection->map == NULL &&
+ if (browser->selection->map == NULL ||
browser->selection->map->dso->annotate_warned)
continue;
goto do_annotate;