+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.27
-# Tue Feb 15 16:16:01 2011
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-# CONFIG_CGROUP_NS is not set
-CONFIG_CGROUP_FREEZER=y
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-# CONFIG_CGROUP_MEM_RES_CTLR is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_PANIC_TIMEOUT=5
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_ASHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_RK2818 is not set
-CONFIG_ARCH_RK29=y
-CONFIG_WIFI_CONTROL_FUNC=y
-# CONFIG_MACH_RK29SDK is not set
-# CONFIG_MACH_RK29WINACCORD is not set
-# CONFIG_MACH_RK29_AIGO is not set
-CONFIG_MACH_RK29_MALATA=y
-CONFIG_RK29_MEM_SIZE_M=512
-
-#
-# RK29 VPU (Video Processing Unit) support
-#
-CONFIG_RK29_VPU=y
-# CONFIG_RK29_VPU_DEBUG is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_PL330=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HAS_WAKELOCK=y
-CONFIG_HAS_EARLYSUSPEND=y
-CONFIG_WAKELOCK=y
-CONFIG_WAKELOCK_STAT=y
-CONFIG_USER_WAKELOCK=y
-CONFIG_EARLYSUSPEND=y
-# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set
-# CONFIG_CONSOLE_EARLYSUSPEND is not set
-CONFIG_FB_EARLYSUSPEND=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-CONFIG_ANDROID_PARANOID_NETWORK=y
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_BNEP is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-CONFIG_BT_HCIBCM4325=y
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-
-#
-# Some wireless drivers require a rate control algorithm
-#
-# CONFIG_WIMAX is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_PM is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND is not set
-CONFIG_MTD_RKNAND=y
-CONFIG_MTD_NAND_RK29XX=y
-CONFIG_RKFTL_PAGECACHE_SIZE=64
-CONFIG_MTD_RKNAND_BUFFER=y
-# CONFIG_MTD_NAND_RK29XX_DEBUG is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_ANDROID_PMEM=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_KERNEL_DEBUGGER_CORE is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_UID_STAT is not set
-# CONFIG_WL127X_RFKILL is not set
-# CONFIG_APANIC is not set
-# CONFIG_STE is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_RK29_SUPPORT_MODEM=y
-CONFIG_MODEM_ROCKCHIP_DEMO=y
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_RK29_VMAC=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-CONFIG_WLAN_80211=y
-# CONFIG_WIFI_NONE is not set
-CONFIG_BCM4329=y
-# CONFIG_MV8686 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=y
-CONFIG_PPPOE=y
-CONFIG_PPPOL2TP=y
-CONFIG_PPPOLAC=y
-CONFIG_PPPOPNS=y
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_KEYRESET=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYS_RK29=y
-CONFIG_SYNAPTICS_SO340010=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_XPT2046_SPI_NOCHOOSE=y
-# CONFIG_TOUCHSCREEN_XPT2046_SPI is not set
-# CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI is not set
-# CONFIG_TOUCHSCREEN_XPT2046_320X480_SPI is not set
-# CONFIG_TOUCHSCREEN_XPT2046_320X480_CBN_SPI is not set
-# CONFIG_TOUCHSCREEN_IT7250 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_HANNSTAR_P1003 is not set
-CONFIG_HANNSTAR_MAX_X=1024
-CONFIG_HANNSTAR_MAX_Y=600
-# CONFIG_HANNSTAR_DEBUG is not set
-CONFIG_SINTEK_3FA16=y
-# CONFIG_EETI_EGALAX is not set
-# CONFIG_TOUCHSCREEN_IT7260 is not set
-# CONFIG_INPUT_MISC is not set
-CONFIG_INPUT_GPIO=y
-CONFIG_G_SENSOR_DEVICE=y
-# CONFIG_GS_MMA7660 is not set
-CONFIG_GS_MMA8452=y
-# CONFIG_INPUT_JOGBALL is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVMEM=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_RK29=y
-CONFIG_UART0_RK29=y
-CONFIG_UART0_CTS_RTS_RK29=y
-CONFIG_UART1_RK29=y
-CONFIG_UART2_RK29=y
-CONFIG_UART2_CTS_RTS_RK29=y
-# CONFIG_UART3_RK29 is not set
-CONFIG_SERIAL_RK29_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_DCC_TTY is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_RK29=y
-
-#
-# Now, there are four I2C interfaces selected by developer.
-#
-CONFIG_I2C0_RK29=y
-CONFIG_I2C1_RK29=y
-CONFIG_I2C2_RK29=y
-CONFIG_I2C3_RK29=y
-CONFIG_I2C_DEV_RK29=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_PCA963X is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ADC=y
-# CONFIG_ADC_RK28 is not set
-CONFIG_ADC_RK29=y
-# CONFIG_SPI_FPGA is not set
-# CONFIG_HEADSET_DET is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_PCA9554 is not set
-# CONFIG_IOEXTEND_TCA6424 is not set
-CONFIG_EXPANDED_GPIO_NUM=0
-CONFIG_EXPANDED_GPIO_IRQ_NUM=0
-# CONFIG_EXPAND_GPIO_SOFT_INTERRUPT is not set
-CONFIG_SPI_FPGA_GPIO_NUM=96
-CONFIG_SPI_FPGA_GPIO_IRQ_NUM=16
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_STC3100 is not set
-# CONFIG_BATTERY_BQ27510 is not set
-CONFIG_BATTERY_BQ3060=y
-# CONFIG_CHECK_BATT_CAPACITY is not set
-# CONFIG_NO_BATTERY_IC is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_RK2818_REGULATOR_CHARGE is not set
-# CONFIG_RK2818_REGULATOR_LP8725 is not set
-CONFIG_RK29_PWM_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-# CONFIG_VIDEO_RK29XX_VOUT is not set
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_SOC_CAMERA_OV7675 is not set
-# CONFIG_SOC_CAMERA_OV2655 is not set
-# CONFIG_SOC_CAMERA_OV2659 is not set
-# CONFIG_SOC_CAMERA_OV9650 is not set
-# CONFIG_SOC_CAMERA_OV3640 is not set
-# CONFIG_SOC_CAMERA_OV5642 is not set
-# CONFIG_SOC_CAMERA_OV5640 is not set
-CONFIG_SOC_CAMERA_S5K6AA=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_VIDEO_RK29=y
-CONFIG_VIDEO_RK29_WORK_ONEFRAME=y
-# CONFIG_VIDEO_RK29_WORK_PINGPONG is not set
-CONFIG_VIDEO_RK29_WORK_IPP=y
-# CONFIG_VIDEO_RK29_WORK_NOT_IPP is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_SMS_SIANO_MDTV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_RK2818 is not set
-CONFIG_FB_RK29=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_RK29_BL=y
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-# CONFIG_LCD_NULL is not set
-# CONFIG_LCD_TD043MGEA1 is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_TJ048NC01CA is not set
-# CONFIG_LCD_HL070VM4AU is not set
-# CONFIG_LCD_HSD070IDW1 is not set
-# CONFIG_LCD_HSD100PXN is not set
-CONFIG_LCD_B101AW06=y
-# CONFIG_LCD_A060SE02 is not set
-# CONFIG_LCD_S1D13521 is not set
-# CONFIG_LCD_NT35582 is not set
-# CONFIG_LCD_NT35580 is not set
-# CONFIG_LCD_ANX7150_720P is not set
-
-#
-# HDMI support
-#
-CONFIG_HDMI=y
-CONFIG_ANX7150=y
-# CONFIG_ANX9030 is not set
-# CONFIG_HDMI_DEBUG is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_RK29_SOC=y
-CONFIG_SND_RK29_SOC_I2S=y
-# CONFIG_SND_RK29_SOC_I2S_2CH is not set
-CONFIG_SND_RK29_SOC_I2S_8CH=y
-# CONFIG_SND_RK29_SOC_WM8988 is not set
-CONFIG_SND_RK29_SOC_WM8900=y
-# CONFIG_SND_RK29_CODEC_SOC_MASTER is not set
-CONFIG_SND_RK29_CODEC_SOC_SLAVE=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM8900=y
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-CONFIG_USB_SERIAL_OPTION=y
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-CONFIG_USB_GADGET_DWC_OTG=y
-CONFIG_USB_DWC_OTG=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_ANDROID=y
-# CONFIG_USB_ANDROID_ACM is not set
-CONFIG_USB_ANDROID_ADB=y
-CONFIG_USB_ANDROID_MASS_STORAGE=y
-# CONFIG_USB_ANDROID_RNDIS is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-CONFIG_USB11_HOST=y
-CONFIG_USB11_HOST_EN=y
-CONFIG_USB20_HOST=y
-CONFIG_USB20_HOST_EN=y
-CONFIG_USB20_OTG=y
-# CONFIG_DWC_OTG_HOST_ONLY is not set
-CONFIG_DWC_OTG_DEVICE_ONLY=y
-CONFIG_DWC_CONN_EN=y
-# CONFIG_DWC_OTG_DEBUG is not set
-CONFIG_DWC_OTG=y
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-CONFIG_MMC_EMBEDDED_SDIO=y
-# CONFIG_MMC_PARANOID_SD_INIT is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_DEFERRED_RESUME=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_SDMMC_RK29=y
-
-#
-# Now, there are two SDMMC controllers selected, SDMMC0 and SDMMC1.
-#
-CONFIG_SDMMC0_RK29=y
-# CONFIG_EMMC_RK29 is not set
-CONFIG_SDMMC1_RK29=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_SWITCH=y
-CONFIG_SWITCH_GPIO=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_ALARM=y
-CONFIG_RTC_INTF_ALARM_DEV=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-CONFIG_RTC_HYM8563=y
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_S35392A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE=128
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE=16
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE=8
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL=0x11d
-# CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT is not set
-CONFIG_ANDROID_TIMED_OUTPUT=y
-CONFIG_ANDROID_TIMED_GPIO=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-
-#
-# DSP
-#
-# CONFIG_RK2818_DSP is not set
-
-#
-# RK1000 control
-#
-# CONFIG_RK1000_CONTROL is not set
-
-#
-# rk2818 POWER CONTROL
-#
-# CONFIG_RK2818_POWER is not set
-
-#
-# GPU Vivante
-#
-CONFIG_VIVANTE=y
-
-#
-# IPP
-#
-CONFIG_RK29_IPP=y
-
-#
-# CMMB
-#
-# CONFIG_CMMB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-CONFIG_NLS_CODEPAGE_936=y
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
help
Support for the ROCKCHIP Board For Rk29 FIH.
-config MACH_RK29_MALATA
- depends on ARCH_RK29
- bool "ROCKCHIP Board Rk29 For Malata"
- help
- Support for the ROCKCHIP Board For Rk29 Malata.
-
config MACH_RK29_PHONESDK
depends on ARCH_RK29
bool "ROCKCHIP Board Rk29 For Phone Sdk"
obj-$(CONFIG_MACH_RK29_P91) += board-rk29-p91.o board-rk29-p91-key.o board-rk29sdk-rfkill.o board-rk29sdk-power.o
obj-$(CONFIG_MACH_RK29SDK_DDR3) += board-rk29-ddr3sdk.o board-rk29sdk-key.o board-rk29sdk-rfkill.o board-rk29sdk-power.o
obj-$(CONFIG_MACH_RK29WINACCORD) += board-rk29-winaccord.o board-rk29sdk-key.o
-obj-$(CONFIG_MACH_RK29_MALATA) += board-malata.o board-rk29malata-key.o board-rk29sdk-rfkill.o
obj-$(CONFIG_MACH_RK29_PHONESDK) += board-rk29-phonesdk.o board-rk29-phonesdk-key.o board-rk29-phonesdk-rfkill.o
obj-$(CONFIG_MACH_RK29FIH) += board-rk29-fih.o board-rk29-fih-key.o board-rk29sdk-rfkill.o board-rk29sdk-power.o
obj-$(CONFIG_MACH_RK29_A22) += board-rk29-a22.o board-rk29-a22-key.o board-rk29-a22-rfkill.o
+++ /dev/null
-/* arch/arm/mach-rk29/board-rk29.c
- *
- * Copyright (C) 2010 ROCKCHIP, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/mmc/host.h>
-#include <linux/android_pmem.h>
-#include <linux/usb/android_composite.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/hardware/gic.h>
-
-#include <mach/iomux.h>
-#include <mach/gpio.h>
-#include <mach/irqs.h>
-#include <mach/rk29_iomap.h>
-#include <mach/board.h>
-#include <mach/rk29_nand.h>
-#include <mach/rk29_camera.h> /* ddl@rock-chips.com : camera support */
-#include <media/soc_camera.h> /* ddl@rock-chips.com : camera support */
-#include <mach/vpu_mem.h>
-#include <mach/sram.h>
-
-#include <linux/regulator/rk29-pwm-regulator.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "../../../drivers/input/touchscreen/xpt2046_cbn_ts.h"
-
-
-/* Set memory size of pmem */
-#ifdef CONFIG_RK29_MEM_SIZE_M
-#define SDRAM_SIZE (CONFIG_RK29_MEM_SIZE_M * SZ_1M)
-#else
-#define SDRAM_SIZE SZ_512M
-#endif
-#define PMEM_GPU_SIZE SZ_64M
-#define PMEM_UI_SIZE SZ_32M
-#define PMEM_VPU_SIZE SZ_64M
-#define PMEM_CAM_SIZE 0x01300000
-#ifdef CONFIG_VIDEO_RK29_WORK_IPP
-#define MEM_CAMIPP_SIZE SZ_4M
-#else
-#define MEM_CAMIPP_SIZE 0
-#endif
-#define MEM_FB_SIZE (3*SZ_2M)
-
-#define PMEM_GPU_BASE ((u32)RK29_SDRAM_PHYS + SDRAM_SIZE - PMEM_GPU_SIZE)
-#define PMEM_UI_BASE (PMEM_GPU_BASE - PMEM_UI_SIZE)
-#define PMEM_VPU_BASE (PMEM_UI_BASE - PMEM_VPU_SIZE)
-#define PMEM_CAM_BASE (PMEM_VPU_BASE - PMEM_CAM_SIZE)
-#define MEM_CAMIPP_BASE (PMEM_CAM_BASE - MEM_CAMIPP_SIZE)
-#define MEM_FB_BASE (MEM_CAMIPP_BASE - MEM_FB_SIZE)
-#define LINUX_SIZE (MEM_FB_BASE - RK29_SDRAM_PHYS)
-
-#define PREALLOC_WLAN_SEC_NUM 4
-#define PREALLOC_WLAN_BUF_NUM 160
-#define PREALLOC_WLAN_SECTION_HEADER 24
-
-#define WLAN_SECTION_SIZE_0 (PREALLOC_WLAN_BUF_NUM * 128)
-#define WLAN_SECTION_SIZE_1 (PREALLOC_WLAN_BUF_NUM * 128)
-#define WLAN_SECTION_SIZE_2 (PREALLOC_WLAN_BUF_NUM * 512)
-#define WLAN_SECTION_SIZE_3 (PREALLOC_WLAN_BUF_NUM * 1024)
-
-#define WLAN_SKB_BUF_NUM 16
-
-static struct sk_buff *wlan_static_skb[WLAN_SKB_BUF_NUM];
-
-struct wifi_mem_prealloc {
- void *mem_ptr;
- unsigned long size;
-};
-
-extern struct sys_timer rk29_timer;
-
-static int rk29_nand_io_init(void)
-{
- return 0;
-}
-
-struct rk29_nand_platform_data rk29_nand_data = {
- .width = 1, /* data bus width in bytes */
- .hw_ecc = 1, /* hw ecc 0: soft ecc */
- .num_flash = 1,
- .io_init = rk29_nand_io_init,
-};
-
-#ifdef CONFIG_FB_RK29
-/*****************************************************************************************
- * lcd devices
- * author: zyw@rock-chips.com
- *****************************************************************************************/
-//#ifdef CONFIG_LCD_TD043MGEA1
-#define LCD_TXD_PIN INVALID_GPIO
-#define LCD_CLK_PIN INVALID_GPIO
-#define LCD_CS_PIN INVALID_GPIO
-/*****************************************************************************************
-* frame buffe devices
-* author: zyw@rock-chips.com
-*****************************************************************************************/
-#define FB_ID 0
-#define FB_DISPLAY_ON_PIN RK29_PIN6_PD0
-#define FB_LCD_STANDBY_PIN RK29_PIN6_PD1
-#define FB_LCD_CABC_EN_PIN RK29_PIN6_PD2
-#define FB_MCU_FMK_PIN INVALID_GPIO
-
-#define FB_DISPLAY_ON_VALUE GPIO_HIGH
-#define FB_LCD_STANDBY_VALUE GPIO_HIGH
-
-//#endif
-static int rk29_lcd_io_init(void)
-{
- int ret = 0;
- return ret;
-}
-
-static int rk29_lcd_io_deinit(void)
-{
- int ret = 0;
- return ret;
-}
-
-static struct rk29lcd_info rk29_lcd_info = {
- .txd_pin = LCD_TXD_PIN,
- .clk_pin = LCD_CLK_PIN,
- .cs_pin = LCD_CS_PIN,
- .io_init = rk29_lcd_io_init,
- .io_deinit = rk29_lcd_io_deinit,
-};
-
-
-static int rk29_fb_io_init(struct rk29_fb_setting_info *fb_setting)
-{
- int ret = 0;
- if(fb_setting->mcu_fmk_en && (FB_MCU_FMK_PIN != INVALID_GPIO))
- {
- ret = gpio_request(FB_MCU_FMK_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_MCU_FMK_PIN);
- printk(">>>>>> FB_MCU_FMK_PIN gpio_request err \n ");
- }
- gpio_direction_input(FB_MCU_FMK_PIN);
- }
- if(fb_setting->disp_on_en && (FB_DISPLAY_ON_PIN != INVALID_GPIO))
- {
- ret = gpio_request(FB_DISPLAY_ON_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_DISPLAY_ON_PIN);
- printk(">>>>>> FB_DISPLAY_ON_PIN gpio_request err \n ");
- }
- }
-
- if(fb_setting->disp_on_en && (FB_LCD_STANDBY_PIN != INVALID_GPIO))
- {
- ret = gpio_request(FB_LCD_STANDBY_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_LCD_STANDBY_PIN);
- printk(">>>>>> FB_LCD_STANDBY_PIN gpio_request err \n ");
- }
- }
-
- if(FB_LCD_CABC_EN_PIN != INVALID_GPIO)
- {
- ret = gpio_request(FB_LCD_CABC_EN_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_LCD_CABC_EN_PIN);
- printk(">>>>>> FB_LCD_CABC_EN_PIN gpio_request err \n ");
- }
- gpio_direction_output(FB_LCD_CABC_EN_PIN, 0);
- gpio_set_value(FB_LCD_CABC_EN_PIN, GPIO_LOW);
- }
-
- return ret;
-}
-
-static struct rk29fb_info rk29_fb_info = {
- .fb_id = FB_ID,
- .disp_on_pin = FB_DISPLAY_ON_PIN,
- .disp_on_value = FB_DISPLAY_ON_VALUE,
- .standby_pin = FB_LCD_STANDBY_PIN,
- .standby_value = FB_LCD_STANDBY_VALUE,
- .mcu_fmk_pin = FB_MCU_FMK_PIN,
- .lcd_info = &rk29_lcd_info,
- .io_init = rk29_fb_io_init,
-};
-
-/* rk29 fb resource */
-static struct resource rk29_fb_resource[] = {
- [0] = {
- .name = "lcdc reg",
- .start = RK29_LCDC_PHYS,
- .end = RK29_LCDC_PHYS + RK29_LCDC_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "lcdc irq",
- .start = IRQ_LCDC,
- .end = IRQ_LCDC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = "win1 buf",
- .start = MEM_FB_BASE,
- .end = MEM_FB_BASE + MEM_FB_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-/*platform_device*/
-struct platform_device rk29_device_fb = {
- .name = "rk29-fb",
- .id = 4,
- .num_resources = ARRAY_SIZE(rk29_fb_resource),
- .resource = rk29_fb_resource,
- .dev = {
- .platform_data = &rk29_fb_info,
- }
-};
-
-struct platform_device rk29_device_dma_cpy = {
- .name = "dma_memcpy",
- .id = 4,
-
-};
-
-#endif
-
-static struct android_pmem_platform_data android_pmem_pdata = {
- .name = "pmem",
- .start = PMEM_UI_BASE,
- .size = PMEM_UI_SIZE,
- .no_allocator = 0,
- .cached = 1,
-};
-
-static struct platform_device android_pmem_device = {
- .name = "android_pmem",
- .id = 0,
- .dev = {
- .platform_data = &android_pmem_pdata,
- },
-};
-
-
-static struct android_pmem_platform_data android_pmem_cam_pdata = {
- .name = "pmem_cam",
- .start = PMEM_CAM_BASE,
- .size = PMEM_CAM_SIZE,
- .no_allocator = 1,
- .cached = 1,
-};
-
-static struct platform_device android_pmem_cam_device = {
- .name = "android_pmem",
- .id = 1,
- .dev = {
- .platform_data = &android_pmem_cam_pdata,
- },
-};
-
-
-static struct vpu_mem_platform_data vpu_mem_pdata = {
- .name = "vpu_mem",
- .start = PMEM_VPU_BASE,
- .size = PMEM_VPU_SIZE,
- .cached = 1,
-};
-
-static struct platform_device rk29_vpu_mem_device = {
- .name = "vpu_mem",
- .id = 2,
- .dev = {
- .platform_data = &vpu_mem_pdata,
- },
-};
-
-static struct platform_device rk29_v4l2_output_devce = {
- .name = "rk29_vout",
-};
-
-/*HANNSTAR_P1003 touch*/
-#if defined (CONFIG_HANNSTAR_P1003)
-#define TOUCH_RESET_PIN RK29_PIN6_PC3
-#define TOUCH_INT_PIN RK29_PIN0_PA2
-
-int p1003_init_platform_hw(void)
-{
- if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
- gpio_free(TOUCH_RESET_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
-
- if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
- gpio_free(TOUCH_INT_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(TOUCH_INT_PIN, 1);
- gpio_direction_output(TOUCH_RESET_PIN, 0);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
-
- return 0;
-}
-
-
-struct p1003_platform_data p1003_info = {
- .model= 1003,
- .init_platform_hw= p1003_init_platform_hw,
-
-};
-#endif
-#if defined (CONFIG_SINTEK_3FA16)
-#define TOUCH_RESET_PIN RK29_PIN6_PC3
-#define TOUCH_INT_PIN RK29_PIN0_PA2
-
-int sintek_init_platform_hw(void)
-{
- if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
- gpio_free(TOUCH_RESET_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
-
- if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
- gpio_free(TOUCH_INT_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(TOUCH_INT_PIN, 1);
- gpio_direction_output(TOUCH_RESET_PIN, 0);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
-
- return 0;
-}
-
-
-struct sintek_platform_data sintek_touch_info = {
- .model= 1003,
- .init_platform_hw= sintek_init_platform_hw,
-
-};
-#endif
-
-#if defined (CONFIG_SYNAPTICS_SO340010)
-
-#define TOUCHPAD_INT_PIN RK29_PIN4_PD5
-
-int synaptics_init_platform_hw(void)
-{
- if(gpio_request(TOUCHPAD_INT_PIN,NULL) != 0){
- gpio_free(TOUCHPAD_INT_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(TOUCHPAD_INT_PIN, 1);
- return 0;
-}
-
-
-struct synaptics_platform_data synaptics_touchkey_info = {
- .model= 1003,
- .init_platform_hw= synaptics_init_platform_hw,
-
-};
-#endif
-
-/*MMA8452 gsensor*/
-#if defined (CONFIG_GS_MMA8452)
-#define MMA8452_INT_PIN RK29_PIN0_PA3
-
-int mma8452_init_platform_hw(void)
-{
-
- if(gpio_request(MMA8452_INT_PIN,NULL) != 0){
- gpio_free(MMA8452_INT_PIN);
- printk("mma8452_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(MMA8452_INT_PIN, 1);
- return 0;
-}
-
-
-struct mma8452_platform_data mma8452_info = {
- .model= 8452,
- .swap_xy = 0,
- .init_platform_hw= mma8452_init_platform_hw,
-
-};
-#endif
-
-
-
-/*****************************************************************************************
- * i2c devices
- * author: kfx@rock-chips.com
-*****************************************************************************************/
-static int rk29_i2c0_io_init(void)
-{
- rk29_mux_api_set(GPIO2B7_I2C0SCL_NAME, GPIO2L_I2C0_SCL);
- rk29_mux_api_set(GPIO2B6_I2C0SDA_NAME, GPIO2L_I2C0_SDA);
- return 0;
-}
-
-static int rk29_i2c1_io_init(void)
-{
- rk29_mux_api_set(GPIO1A7_I2C1SCL_NAME, GPIO1L_I2C1_SCL);
- rk29_mux_api_set(GPIO1A6_I2C1SDA_NAME, GPIO1L_I2C1_SDA);
- return 0;
-}
-static int rk29_i2c2_io_init(void)
-{
- rk29_mux_api_set(GPIO5D4_I2C2SCL_NAME, GPIO5H_I2C2_SCL);
- rk29_mux_api_set(GPIO5D3_I2C2SDA_NAME, GPIO5H_I2C2_SDA);
- return 0;
-}
-
-static int rk29_i2c3_io_init(void)
-{
- rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_I2C3_SCL);
- rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_I2C3_SDA);
- return 0;
-}
-
-struct rk29_i2c_platform_data default_i2c0_data = {
- .bus_num = 0,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_IRQ,
- .io_init = rk29_i2c0_io_init,
-};
-
-struct rk29_i2c_platform_data default_i2c1_data = {
- .bus_num = 1,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_POLL,
- .io_init = rk29_i2c1_io_init,
-};
-
-struct rk29_i2c_platform_data default_i2c2_data = {
- .bus_num = 2,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_IRQ,
- .io_init = rk29_i2c2_io_init,
-};
-
-struct rk29_i2c_platform_data default_i2c3_data = {
- .bus_num = 3,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_POLL,
- .io_init = rk29_i2c3_io_init,
-};
-
-#ifdef CONFIG_I2C0_RK29
-static struct i2c_board_info __initdata board_i2c0_devices[] = {
-#if defined (CONFIG_RK1000_CONTROL)
- {
- .type = "rk1000_control",
- .addr = 0x40,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_SND_SOC_RK1000)
- {
- .type = "rk1000_i2c_codec",
- .addr = 0x60,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_SND_SOC_WM8900)
- {
- .type = "wm8900",
- .addr = 0x1A,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_BATTERY_STC3100)
- {
- .type = "stc3100",
- .addr = 0x70,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_RTC_HYM8563)
- {
- .type = "rtc_hym8563",
- .addr = 0x51,
- .flags = 0,
- ///.irq = RK2818_PIN_PA4,
- },
-#endif
-
-#if defined (CONFIG_BATTERY_BQ27510)
- {
- .type = "bq27510",
- .addr = 0x55,
- .flags = 0,
- },
-#endif
-#if defined(CONFIG_BATTERY_BQ3060)
- {
- .type = "bq3060",
- .addr = 0x0b,
- .flags = I2C_M_IGNORE_NAK,
- },
-#endif
-#if defined (CONFIG_GS_MMA8452)
- {
- .type = "gs_mma8452",
- .addr = 0x1c,
- .flags = 0,
- .irq = MMA8452_INT_PIN,
- .platform_data = &mma8452_info,
- },
-#endif
-#if defined (CONFIG_COMPASS_AK8973)
- {
- .type = "ak8973",
- .addr = 0x1d,
- .flags = 0,
- .irq = RK29_PIN0_PA4,
- },
-#endif
-#if defined (CONFIG_COMPASS_AK8975)
- {
- .type = "ak8975",
- .addr = 0x1d,
- .flags = 0,
- .irq = RK29_PIN0_PA4,
- },
-#endif
-};
-#endif
-
-#ifdef CONFIG_I2C1_RK29
-static struct i2c_board_info __initdata board_i2c1_devices[] = {
-#if defined (CONFIG_RK1000_CONTROL1)
- {
- .type = "rk1000_control",
- .addr = 0x40,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_ANX7150)
- {
- .type = "anx7150",
- .addr = 0x39, //0x39, 0x3d
- .flags = 0,
- .irq = RK29_PIN1_PD7,
- },
-#endif
-
-};
-#endif
-
-#ifdef CONFIG_I2C2_RK29
-static struct i2c_board_info __initdata board_i2c2_devices[] = {
-#if defined (CONFIG_HANNSTAR_P1003)
- {
- .type = "p1003_touch",
- .addr = 0x04,
- .flags = 0,
- .irq = RK29_PIN0_PA2,
- .platform_data = &p1003_info,
- },
-#endif
-#if defined (CONFIG_SINTEK_3FA16)
- {
- .type = "sintek_touch",
- .addr = 0x5c,
- .flags = I2C_M_IGNORE_NAK,
- .irq = RK29_PIN0_PA2,
- .platform_data = &sintek_touch_info,
- },
-
-#endif
-};
-#endif
-
-#ifdef CONFIG_I2C3_RK29
-static struct i2c_board_info __initdata board_i2c3_devices[] = {
-
-#if defined (CONFIG_SYNAPTICS_SO340010)
- {
- .type = "synaptics_touchkey",
- .addr = 0x2c,
- .flags = 0,
- .irq = RK29_PIN4_PD5,
- .platform_data = &synaptics_touchkey_info,
- },
-
-#endif
-};
-#endif
-
-/*****************************************************************************************
- * camera devices
- * author: ddl@rock-chips.com
- *****************************************************************************************/
-#ifdef CONFIG_VIDEO_RK29
-#if defined(CONFIG_SOC_CAMERA_OV5642)
-#define SENSOR_NAME_0 RK29_CAM_SENSOR_NAME_OV5642 /* back camera sensor */
-#define SENSOR_IIC_ADDR_0 0x78
-#define SENSOR_IIC_ADAPTER_ID_0 1
-#define SENSOR_POWER_PIN_0 INVALID_GPIO
-#define SENSOR_RESET_PIN_0 INVALID_GPIO
-#define SENSOR_POWERDN_PIN_0 RK29_PIN6_PB7
-#define SENSOR_FALSH_PIN_0 INVALID_GPIO
-#define SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
-#define SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
-#define SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
-#define SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_L
-#else
-#define SENSOR_NAME_0 ""/* back camera sensor */
-#define SENSOR_IIC_ADDR_0 0x00
-#define SENSOR_IIC_ADAPTER_ID_0 1
-#define SENSOR_POWER_PIN_0 INVALID_GPIO
-#define SENSOR_RESET_PIN_0 INVALID_GPIO
-#define SENSOR_POWERDN_PIN_0 INVALID_GPIO
-#define SENSOR_FALSH_PIN_0 INVALID_GPIO
-#define SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
-#define SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
-#define SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
-#define SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_L
-
-#endif
-
-#if defined(CONFIG_SOC_CAMERA_OV2659)
-#define SENSOR_NAME_1 RK29_CAM_SENSOR_NAME_OV2659 /* front camera sensor */
-#define SENSOR_IIC_ADDR_1 0x60
-#define SENSOR_IIC_ADAPTER_ID_1 1
-#define SENSOR_POWER_PIN_1 INVALID_GPIO
-#define SENSOR_RESET_PIN_1 INVALID_GPIO
-#define SENSOR_POWERDN_PIN_1 RK29_PIN5_PD7
-#define SENSOR_FALSH_PIN_1 INVALID_GPIO
-#define SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
-#define SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
-#define SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
-#define SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
-#endif
-#if defined(CONFIG_SOC_CAMERA_S5K6AA)
-#define SENSOR_NAME_1 RK29_CAM_SENSOR_NAME_S5K6AA /*importek mu763 camera sensor */
-#define SENSOR_IIC_ADDR_1 0x78
-#define SENSOR_IIC_ADAPTER_ID_1 1
-#define SENSOR_POWER_PIN_1 RK29_PIN5_PD7
-#define SENSOR_RESET_PIN_1 INVALID_GPIO
-#define SENSOR_POWERDN_PIN_1 RK29_PIN5_PD7
-#define SENSOR_FALSH_PIN_1 INVALID_GPIO
-#define SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_H
-#define SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
-#define SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
-#define SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
-#endif
-
-static int rk29_sensor_io_init(void);
-static int rk29_sensor_io_deinit(int sensor);
-static int rk29_sensor_ioctrl(struct device *dev,enum rk29camera_ioctrl_cmd cmd,int on);
-
-struct rk29camera_platform_data rk29_camera_platform_data = {
- .io_init = rk29_sensor_io_init,
- .io_deinit = rk29_sensor_io_deinit,
- .sensor_ioctrl = rk29_sensor_ioctrl,
- .gpio_res = {
- {
- .gpio_reset = SENSOR_RESET_PIN_0,
- .gpio_power = SENSOR_POWER_PIN_0,
- .gpio_powerdown = SENSOR_POWERDN_PIN_0,
- .gpio_flash = SENSOR_FALSH_PIN_0,
- .gpio_flag = (SENSOR_POWERACTIVE_LEVEL_0|SENSOR_RESETACTIVE_LEVEL_0|SENSOR_POWERDNACTIVE_LEVEL_0|SENSOR_FLASHACTIVE_LEVEL_0),
- .gpio_init = 0,
- .dev_name = SENSOR_NAME_0,
- }, {
- .gpio_reset = SENSOR_RESET_PIN_1,
- .gpio_power = SENSOR_POWER_PIN_1,
- .gpio_powerdown = SENSOR_POWERDN_PIN_1,
- .gpio_flash = SENSOR_FALSH_PIN_1,
- .gpio_flag = (SENSOR_POWERACTIVE_LEVEL_1|SENSOR_RESETACTIVE_LEVEL_1|SENSOR_POWERDNACTIVE_LEVEL_1|SENSOR_FLASHACTIVE_LEVEL_1),
- .gpio_init = 0,
- .dev_name = SENSOR_NAME_1,
- }
- },
- #ifdef CONFIG_VIDEO_RK29_WORK_IPP
- .meminfo = {
- .name = "camera_ipp_mem",
- .start = MEM_CAMIPP_BASE,
- .size = MEM_CAMIPP_SIZE,
- }
- #endif
-};
-
-static int rk29_sensor_io_init(void)
-{
- int ret = 0, i;
- unsigned int camera_reset = INVALID_GPIO, camera_power = INVALID_GPIO;
- unsigned int camera_powerdown = INVALID_GPIO, camera_flash = INVALID_GPIO;
- unsigned int camera_ioflag;
-
- for (i=0; i<2; i++) {
- camera_reset = rk29_camera_platform_data.gpio_res[i].gpio_reset;
- camera_power = rk29_camera_platform_data.gpio_res[i].gpio_power;
- camera_powerdown = rk29_camera_platform_data.gpio_res[i].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[i].gpio_flash;
- camera_ioflag = rk29_camera_platform_data.gpio_res[i].gpio_flag;
- rk29_camera_platform_data.gpio_res[i].gpio_init = 0;
-
- if (camera_power != INVALID_GPIO) {
- ret = gpio_request(camera_power, "camera power");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_POWERACTIVE_MASK;
- gpio_set_value(camera_reset, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- gpio_direction_output(camera_power, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
-
- //printk("\n%s....power pin(%d) init success(0x%x) \n",__FUNCTION__,camera_power,(((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
-
- }
-
- if (camera_reset != INVALID_GPIO) {
- ret = gpio_request(camera_reset, "camera reset");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_RESETACTIVE_MASK;
- gpio_set_value(camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- gpio_direction_output(camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
-
- //printk("\n%s....reset pin(%d) init success(0x%x)\n",__FUNCTION__,camera_reset,((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
-
- }
-
- if (camera_powerdown != INVALID_GPIO) {
- ret = gpio_request(camera_powerdown, "camera powerdown");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_POWERDNACTIVE_MASK;
- gpio_set_value(camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- gpio_direction_output(camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
-
- //printk("\n%s....powerdown pin(%d) init success(0x%x) \n",__FUNCTION__,camera_powerdown,((camera_ioflag&RK29_CAM_POWERDNACTIVE_BITPOS)>>RK29_CAM_POWERDNACTIVE_BITPOS));
-
- }
-
- if (camera_flash != INVALID_GPIO) {
- ret = gpio_request(camera_flash, "camera flash");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_FLASHACTIVE_MASK;
- gpio_set_value(camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- gpio_direction_output(camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
-
- //printk("\n%s....flash pin(%d) init success(0x%x) \n",__FUNCTION__,camera_flash,((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
-
- }
- continue;
-sensor_io_int_loop_end:
- rk29_sensor_io_deinit(i);
- continue;
- }
-
- return 0;
-}
-
-static int rk29_sensor_io_deinit(int sensor)
-{
- unsigned int camera_reset = INVALID_GPIO, camera_power = INVALID_GPIO;
- unsigned int camera_powerdown = INVALID_GPIO, camera_flash = INVALID_GPIO;
-
- camera_reset = rk29_camera_platform_data.gpio_res[sensor].gpio_reset;
- camera_power = rk29_camera_platform_data.gpio_res[sensor].gpio_power;
- camera_powerdown = rk29_camera_platform_data.gpio_res[sensor].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[sensor].gpio_flash;
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_POWERACTIVE_MASK) {
- if (camera_power != INVALID_GPIO) {
- gpio_direction_input(camera_power);
- gpio_free(camera_power);
- }
- }
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_RESETACTIVE_MASK) {
- if (camera_reset != INVALID_GPIO) {
- gpio_direction_input(camera_reset);
- gpio_free(camera_reset);
- }
- }
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_POWERDNACTIVE_MASK) {
- if (camera_powerdown != INVALID_GPIO) {
- gpio_direction_input(camera_powerdown);
- gpio_free(camera_powerdown);
- }
- }
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_FLASHACTIVE_MASK) {
- if (camera_flash != INVALID_GPIO) {
- gpio_direction_input(camera_flash);
- gpio_free(camera_flash);
- }
- }
-
- rk29_camera_platform_data.gpio_res[sensor].gpio_init = 0;
- return 0;
-}
-static int rk29_sensor_ioctrl(struct device *dev,enum rk29camera_ioctrl_cmd cmd, int on)
-{
- unsigned int camera_power=INVALID_GPIO,camera_reset=INVALID_GPIO, camera_powerdown=INVALID_GPIO,camera_flash = INVALID_GPIO;
- unsigned int camera_ioflag,camera_io_init;
- int ret = RK29_CAM_IO_SUCCESS;
-
- if(rk29_camera_platform_data.gpio_res[0].dev_name && (strcmp(rk29_camera_platform_data.gpio_res[0].dev_name, dev_name(dev)) == 0)) {
- camera_power = rk29_camera_platform_data.gpio_res[0].gpio_power;
- camera_reset = rk29_camera_platform_data.gpio_res[0].gpio_reset;
- camera_powerdown = rk29_camera_platform_data.gpio_res[0].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[0].gpio_flash;
- camera_ioflag = rk29_camera_platform_data.gpio_res[0].gpio_flag;
- camera_io_init = rk29_camera_platform_data.gpio_res[0].gpio_init;
- } else if (rk29_camera_platform_data.gpio_res[1].dev_name && (strcmp(rk29_camera_platform_data.gpio_res[1].dev_name, dev_name(dev)) == 0)) {
- camera_power = rk29_camera_platform_data.gpio_res[1].gpio_power;
- camera_reset = rk29_camera_platform_data.gpio_res[1].gpio_reset;
- camera_powerdown = rk29_camera_platform_data.gpio_res[1].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[1].gpio_flash;
- camera_ioflag = rk29_camera_platform_data.gpio_res[1].gpio_flag;
- camera_io_init = rk29_camera_platform_data.gpio_res[1].gpio_init;
- }
-
- switch (cmd)
- {
- case Cam_Power:
- {
- if (camera_power != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_POWERACTIVE_MASK) {
- if (on) {
- gpio_set_value(camera_power, ((camera_ioflag&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- //printk("\n%s..%s..PowerPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_power, ((camera_ioflag&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- msleep(10);
- } else {
- gpio_set_value(camera_power, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- //printk("\n%s..%s..PowerPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_power, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..ResetPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_reset);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
- case Cam_Reset:
- {
- if (camera_reset != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_RESETACTIVE_MASK) {
- if (on) {
- gpio_set_value(camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- //printk("\n%s..%s..ResetPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev),camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- } else {
- gpio_set_value(camera_reset,(((~camera_ioflag)&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- //printk("\n%s..%s..ResetPin= %d..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_reset, (((~camera_ioflag)&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..ResetPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_reset);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
-
- case Cam_PowerDown:
- {
- if (camera_powerdown != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_POWERDNACTIVE_MASK) {
- if (on) {
- gpio_set_value(camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- //printk("\n%s..%s..PowerDownPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev),camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- } else {
- gpio_set_value(camera_powerdown,(((~camera_ioflag)&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- //printk("\n%s..%s..PowerDownPin= %d..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_powerdown, (((~camera_ioflag)&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..PowerDownPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_powerdown);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
-
- case Cam_Flash:
- {
- if (camera_flash != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_FLASHACTIVE_MASK) {
- if (on) {
- gpio_set_value(camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- //printk("\n%s..%s..FlashPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev),camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- } else {
- gpio_set_value(camera_flash,(((~camera_ioflag)&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- //printk("\n%s..%s..FlashPin= %d..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_flash, (((~camera_ioflag)&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..FlashPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_flash);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
-
- default:
- {
- printk("%s cmd(0x%x) is unknown!\n",__FUNCTION__, cmd);
- break;
- }
- }
- return ret;
-}
-static int rk29_sensor_power(struct device *dev, int on)
-{
- rk29_sensor_ioctrl(dev,Cam_Power,on);
- return 0;
-}
-static int rk29_sensor_reset(struct device *dev)
-{
- rk29_sensor_ioctrl(dev,Cam_Reset,1);
- msleep(2);
- rk29_sensor_ioctrl(dev,Cam_Reset,0);
- return 0;
-}
-static int rk29_sensor_powerdown(struct device *dev, int on)
-{
- return rk29_sensor_ioctrl(dev,Cam_PowerDown,on);
-}
-#if (SENSOR_IIC_ADDR_0 != 0x00)
-static struct i2c_board_info rk29_i2c_cam_info_0[] = {
- {
- I2C_BOARD_INFO(SENSOR_NAME_0, SENSOR_IIC_ADDR_0>>1)
- },
-};
-
-static struct soc_camera_link rk29_iclink_0 = {
- .bus_id = RK29_CAM_PLATFORM_DEV_ID,
- .power = rk29_sensor_power,
- .powerdown = rk29_sensor_powerdown,
- .board_info = &rk29_i2c_cam_info_0[0],
- .i2c_adapter_id = SENSOR_IIC_ADAPTER_ID_0,
- .module_name = SENSOR_NAME_0,
-};
-
-/*platform_device : soc-camera need */
-static struct platform_device rk29_soc_camera_pdrv_0 = {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .init_name = SENSOR_NAME_0,
- .platform_data = &rk29_iclink_0,
- },
-};
-#endif
-static struct i2c_board_info rk29_i2c_cam_info_1[] = {
- {
- I2C_BOARD_INFO(SENSOR_NAME_1, SENSOR_IIC_ADDR_1>>1)
- },
-};
-
-static struct soc_camera_link rk29_iclink_1 = {
- .bus_id = RK29_CAM_PLATFORM_DEV_ID,
- .power = rk29_sensor_power,
- .powerdown = rk29_sensor_powerdown,
- .board_info = &rk29_i2c_cam_info_1[0],
- .i2c_adapter_id = SENSOR_IIC_ADAPTER_ID_1,
- .module_name = SENSOR_NAME_1,
-};
-
-/*platform_device : soc-camera need */
-static struct platform_device rk29_soc_camera_pdrv_1 = {
- .name = "soc-camera-pdrv",
- .id = 1,
- .dev = {
- .init_name = SENSOR_NAME_1,
- .platform_data = &rk29_iclink_1,
- },
-};
-
-
-static u64 rockchip_device_camera_dmamask = 0xffffffffUL;
-static struct resource rk29_camera_resource[] = {
- [0] = {
- .start = RK29_VIP_PHYS,
- .end = RK29_VIP_PHYS + RK29_VIP_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_VIP,
- .end = IRQ_VIP,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-/*platform_device : */
-static struct platform_device rk29_device_camera = {
- .name = RK29_CAM_DRV_NAME,
- .id = RK29_CAM_PLATFORM_DEV_ID, /* This is used to put cameras on this interface */
- .num_resources = ARRAY_SIZE(rk29_camera_resource),
- .resource = rk29_camera_resource,
- .dev = {
- .dma_mask = &rockchip_device_camera_dmamask,
- .coherent_dma_mask = 0xffffffffUL,
- .platform_data = &rk29_camera_platform_data,
- }
-};
-#endif
-/*****************************************************************************************
- * backlight devices
- * author: nzy@rock-chips.com
- *****************************************************************************************/
-#ifdef CONFIG_BACKLIGHT_RK29_BL
- /*
- GPIO1B5_PWM0_NAME, GPIO1L_PWM0
- GPIO5D2_PWM1_UART1SIRIN_NAME, GPIO5H_PWM1
- GPIO2A3_SDMMC0WRITEPRT_PWM2_NAME, GPIO2L_PWM2
- GPIO1A5_EMMCPWREN_PWM3_NAME, GPIO1L_PWM3
- */
-
-#define PWM_ID 0
-#define PWM_MUX_NAME GPIO1B5_PWM0_NAME
-#define PWM_MUX_MODE GPIO1L_PWM0
-#define PWM_MUX_MODE_GPIO GPIO1L_GPIO1B5
-#define PWM_GPIO_PIN RK29_PIN1_PB5
-#define PWM_EFFECT_VALUE 1
-
-//#define LCD_DISP_ON_PIN
-
-#ifdef LCD_DISP_ON_PIN
-#define BL_EN_MUX_NAME GPIOF34_UART3_SEL_NAME
-#define BL_EN_MUX_MODE IOMUXB_GPIO1_B34
-
-#define BL_EN_PIN GPIO0L_GPIO0A5
-#define BL_EN_VALUE GPIO_HIGH
-#endif
-static void rk29_backlight_close(void){
- int ret;
- ret = gpio_request(FB_DISPLAY_ON_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_DISPLAY_ON_PIN);
- printk(">>>>>> FB_DISPLAY_ON_PIN gpio_request err \n ");
- }
- gpio_direction_output(FB_DISPLAY_ON_PIN, 0);
- gpio_set_value(FB_DISPLAY_ON_PIN, GPIO_LOW);
- gpio_free(FB_DISPLAY_ON_PIN);
-
- rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
- ret = gpio_request(PWM_GPIO_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(PWM_GPIO_PIN);
- printk(">>>>>> FB_DISPLAY_ON_PIN gpio_request err \n ");
- }
- gpio_direction_output(PWM_GPIO_PIN, 0);
- gpio_set_value(PWM_GPIO_PIN, GPIO_HIGH);
- gpio_free(PWM_GPIO_PIN);
-}
-static int rk29_backlight_io_init(void)
-{
- int ret = 0;
-
- rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
- #ifdef LCD_DISP_ON_PIN
- rk29_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
-
- ret = gpio_request(BL_EN_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(BL_EN_PIN);
- }
-
- gpio_direction_output(BL_EN_PIN, 0);
- gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
- #endif
- return ret;
-}
-
-static int rk29_backlight_io_deinit(void)
-{
- int ret = 0;
- #ifdef LCD_DISP_ON_PIN
- gpio_free(BL_EN_PIN);
- #endif
- rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- return ret;
-}
-struct rk29_bl_info rk29_bl_info = {
- .pwm_id = PWM_ID,
- .bl_ref = PWM_EFFECT_VALUE,
- .io_init = rk29_backlight_io_init,
- .io_deinit = rk29_backlight_io_deinit,
-};
-#endif
-/*****************************************************************************************
-* pwm voltage regulator devices
-******************************************************************************************/
-#if defined (CONFIG_RK29_PWM_REGULATOR)
-
-#define REGULATOR_PWM_ID 2
-#define REGULATOR_PWM_MUX_NAME GPIO2A3_SDMMC0WRITEPRT_PWM2_NAME
-#define REGULATOR_PWM_MUX_MODE GPIO2L_PWM2
-#define REGULATOR_PWM_MUX_MODE_GPIO GPIO2L_GPIO2A3
-#define REGULATOR_PWM_GPIO RK29_PIN2_PA3
-
-static struct regulator_consumer_supply pwm_consumers[] = {
- {
- .supply = "vcore",
- }
-};
-
-static struct regulator_init_data rk29_pwm_regulator_data = {
- .constraints = {
- .name = "PWM2",
- .min_uV = 950000,
- .max_uV = 1400000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwm_consumers),
- .consumer_supplies = pwm_consumers,
-};
-
-static struct pwm_platform_data rk29_regulator_pwm_platform_data = {
- .pwm_id = REGULATOR_PWM_ID,
- .pwm_gpio = REGULATOR_PWM_GPIO,
- //.pwm_iomux_name[] = REGULATOR_PWM_MUX_NAME;
- .pwm_iomux_name = REGULATOR_PWM_MUX_NAME,
- .pwm_iomux_pwm = REGULATOR_PWM_MUX_MODE,
- .pwm_iomux_gpio = REGULATOR_PWM_MUX_MODE_GPIO,
- .init_data = &rk29_pwm_regulator_data,
-};
-
-static struct platform_device rk29_device_pwm_regulator = {
- .name = "pwm-voltage-regulator",
- .id = -1,
- .dev = {
- .platform_data = &rk29_regulator_pwm_platform_data,
- },
-};
-
-#endif
-
-/*****************************************************************************************
- * SDMMC devices
-*****************************************************************************************/
-#ifdef CONFIG_SDMMC0_RK29
-static int rk29_sdmmc0_cfg_gpio(void)
-{
- rk29_mux_api_set(GPIO1D1_SDMMC0CMD_NAME, GPIO1H_SDMMC0_CMD);
- rk29_mux_api_set(GPIO1D0_SDMMC0CLKOUT_NAME, GPIO1H_SDMMC0_CLKOUT);
- rk29_mux_api_set(GPIO1D2_SDMMC0DATA0_NAME, GPIO1H_SDMMC0_DATA0);
- rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_SDMMC0_DATA1);
- rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_SDMMC0_DATA2);
- rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_SDMMC0_DATA3);
- rk29_mux_api_set(GPIO2A2_SDMMC0DETECTN_NAME, GPIO2L_SDMMC0_DETECT_N);
- rk29_mux_api_set(GPIO5D5_SDMMC0PWREN_NAME, GPIO5H_GPIO5D5); ///GPIO5H_SDMMC0_PWR_EN); ///GPIO5H_GPIO5D5);
- gpio_request(RK29_PIN5_PD5,"sdmmc");
- gpio_set_value(RK29_PIN5_PD5,GPIO_HIGH);
- mdelay(100);
- gpio_set_value(RK29_PIN5_PD5,GPIO_LOW);
- return 0;
-}
-
-#define CONFIG_SDMMC0_USE_DMA
-struct rk29_sdmmc_platform_data default_sdmmc0_data = {
- .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
- MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33|
- MMC_VDD_33_34|MMC_VDD_34_35| MMC_VDD_35_36),
- .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
- .io_init = rk29_sdmmc0_cfg_gpio,
- .dma_name = "sd_mmc",
-#ifdef CONFIG_SDMMC0_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
-};
-#endif
-#ifdef CONFIG_SDMMC1_RK29
-#define CONFIG_SDMMC1_USE_DMA
-static int rk29_sdmmc1_cfg_gpio(void)
-{
- rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
- rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
- rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
- rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_SDMMC1_DATA1);
- rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_SDMMC1_DATA2);
- rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_SDMMC1_DATA3);
- //rk29_mux_api_set(GPIO1C0_UART0CTSN_SDMMC1DETECTN_NAME, GPIO1H_SDMMC1_DETECT_N);
- return 0;
-}
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
-static int rk29sdk_wifi_status(struct device *dev);
-static int rk29sdk_wifi_status_register(void (*callback)(int card_presend, void *dev_id), void *dev_id);
-#endif
-
-#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK29_PIN1_PD6
-
-struct rk29_sdmmc_platform_data default_sdmmc1_data = {
- .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|
- MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32|
- MMC_VDD_32_33|MMC_VDD_33_34),
- .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_SDIO_IRQ|
- MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
- .io_init = rk29_sdmmc1_cfg_gpio,
- .dma_name = "sdio",
-#ifdef CONFIG_SDMMC1_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- .status = rk29sdk_wifi_status,
- .register_status_notify = rk29sdk_wifi_status_register,
-#endif
-#if 0
- .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
-#endif
-};
-#endif
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
-#define RK29SDK_WIFI_BT_GPIO_POWER_N RK29_PIN5_PD6
-#define RK29SDK_WIFI_GPIO_RESET_N RK29_PIN6_PC0
-#define RK29SDK_BT_GPIO_RESET_N RK29_PIN6_PC4
-
-static int rk29sdk_wifi_cd = 0; /* wifi virtual 'card detect' status */
-static void (*wifi_status_cb)(int card_present, void *dev_id);
-static void *wifi_status_cb_devid;
-int rk29sdk_wifi_power_state = 0;
-int rk29sdk_bt_power_state = 0;
-
-static int rk29sdk_wifi_status(struct device *dev)
-{
- return rk29sdk_wifi_cd;
-}
-
-static int rk29sdk_wifi_status_register(void (*callback)(int card_present, void *dev_id), void *dev_id)
-{
- if(wifi_status_cb)
- return -EAGAIN;
- wifi_status_cb = callback;
- wifi_status_cb_devid = dev_id;
- return 0;
-}
-
-static int rk29sdk_wifi_bt_gpio_control_init(void)
-{
- if (gpio_request(RK29SDK_WIFI_BT_GPIO_POWER_N, "wifi_bt_power")) {
- pr_info("%s: request wifi_bt power gpio failed\n", __func__);
- return -1;
- }
-
- if (gpio_request(RK29SDK_WIFI_GPIO_RESET_N, "wifi reset")) {
- pr_info("%s: request wifi reset gpio failed\n", __func__);
- gpio_free(RK29SDK_WIFI_BT_GPIO_POWER_N);
- return -1;
- }
-
- if (gpio_request(RK29SDK_BT_GPIO_RESET_N, "bt reset")) {
- pr_info("%s: request bt reset gpio failed\n", __func__);
- gpio_free(RK29SDK_WIFI_GPIO_RESET_N);
- return -1;
- }
-
- gpio_direction_output(RK29SDK_WIFI_BT_GPIO_POWER_N, GPIO_LOW);
- gpio_direction_output(RK29SDK_WIFI_GPIO_RESET_N, GPIO_LOW);
- gpio_direction_output(RK29SDK_BT_GPIO_RESET_N, GPIO_LOW);
-
- pr_info("%s: init finished\n",__func__);
-
- return 0;
-}
-
-static int rk29sdk_wifi_power(int on)
-{
- pr_info("%s: %d\n", __func__, on);
- if (on){
- gpio_set_value(RK29SDK_WIFI_BT_GPIO_POWER_N, on);
- mdelay(100);
- pr_info("wifi turn on power\n");
- }else{
- if (!rk29sdk_bt_power_state){
- gpio_set_value(RK29SDK_WIFI_BT_GPIO_POWER_N, on);
- mdelay(100);
- pr_info("wifi shut off power\n");
- }else
- {
- pr_info("wifi shouldn't shut off power, bt is using it!\n");
- }
-
- }
-
- rk29sdk_wifi_power_state = on;
- return 0;
-}
-
-static int rk29sdk_wifi_reset_state;
-static int rk29sdk_wifi_reset(int on)
-{
- pr_info("%s: %d\n", __func__, on);
- gpio_set_value(RK29SDK_WIFI_GPIO_RESET_N, on);
- mdelay(100);
- rk29sdk_wifi_reset_state = on;
- return 0;
-}
-
-int rk29sdk_wifi_set_carddetect(int val)
-{
- pr_info("%s:%d\n", __func__, val);
- rk29sdk_wifi_cd = val;
- if (wifi_status_cb){
- wifi_status_cb(val, wifi_status_cb_devid);
- }else {
- pr_warning("%s, nobody to notify\n", __func__);
- }
- return 0;
-}
-EXPORT_SYMBOL(rk29sdk_wifi_set_carddetect);
-
-static struct wifi_mem_prealloc wifi_mem_array[PREALLOC_WLAN_SEC_NUM] = {
- {NULL, (WLAN_SECTION_SIZE_0 + PREALLOC_WLAN_SECTION_HEADER)},
- {NULL, (WLAN_SECTION_SIZE_1 + PREALLOC_WLAN_SECTION_HEADER)},
- {NULL, (WLAN_SECTION_SIZE_2 + PREALLOC_WLAN_SECTION_HEADER)},
- {NULL, (WLAN_SECTION_SIZE_3 + PREALLOC_WLAN_SECTION_HEADER)}
-};
-
-static void *rk29sdk_mem_prealloc(int section, unsigned long size)
-{
- if (section == PREALLOC_WLAN_SEC_NUM)
- return wlan_static_skb;
-
- if ((section < 0) || (section > PREALLOC_WLAN_SEC_NUM))
- return NULL;
-
- if (wifi_mem_array[section].size < size)
- return NULL;
-
- return wifi_mem_array[section].mem_ptr;
-}
-
-int __init rk29sdk_init_wifi_mem(void)
-{
- int i;
- int j;
-
- for (i = 0 ; i < WLAN_SKB_BUF_NUM ; i++) {
- wlan_static_skb[i] = dev_alloc_skb(
- ((i < (WLAN_SKB_BUF_NUM / 2)) ? 4096 : 8192));
-
- if (!wlan_static_skb[i])
- goto err_skb_alloc;
- }
-
- for (i = 0 ; i < PREALLOC_WLAN_SEC_NUM ; i++) {
- wifi_mem_array[i].mem_ptr =
- kmalloc(wifi_mem_array[i].size, GFP_KERNEL);
-
- if (!wifi_mem_array[i].mem_ptr)
- goto err_mem_alloc;
- }
- return 0;
-
- err_mem_alloc:
- pr_err("Failed to mem_alloc for WLAN\n");
- for (j = 0 ; j < i ; j++)
- kfree(wifi_mem_array[j].mem_ptr);
-
- i = WLAN_SKB_BUF_NUM;
-
- err_skb_alloc:
- pr_err("Failed to skb_alloc for WLAN\n");
- for (j = 0 ; j < i ; j++)
- dev_kfree_skb(wlan_static_skb[j]);
-
- return -ENOMEM;
-}
-
-static struct wifi_platform_data rk29sdk_wifi_control = {
- .set_power = rk29sdk_wifi_power,
- .set_reset = rk29sdk_wifi_reset,
- .set_carddetect = rk29sdk_wifi_set_carddetect,
- .mem_prealloc = rk29sdk_mem_prealloc,
-};
-static struct platform_device rk29sdk_wifi_device = {
- .name = "bcm4329_wlan",
- .id = 1,
- .dev = {
- .platform_data = &rk29sdk_wifi_control,
- },
-};
-#endif
-
-
-/* bluetooth rfkill device */
-static struct platform_device rk29sdk_rfkill = {
- .name = "rk29sdk_rfkill",
- .id = -1,
-};
-
-
-#ifdef CONFIG_VIVANTE
-static struct resource resources_gpu[] = {
- [0] = {
- .name = "gpu_irq",
- .start = IRQ_GPU,
- .end = IRQ_GPU,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .name = "gpu_base",
- .start = RK29_GPU_PHYS,
- .end = RK29_GPU_PHYS + RK29_GPU_SIZE,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .name = "gpu_mem",
- .start = PMEM_GPU_BASE,
- .end = PMEM_GPU_BASE + PMEM_GPU_SIZE,
- .flags = IORESOURCE_MEM,
- },
-};
-static struct platform_device rk29_device_gpu = {
- .name = "galcore",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_gpu),
- .resource = resources_gpu,
-};
-#endif
-#ifdef CONFIG_KEYS_RK29
-extern struct rk29_keys_platform_data rk29_keys_pdata;
-static struct platform_device rk29_device_keys = {
- .name = "rk29-keypad",
- .id = -1,
- .dev = {
- .platform_data = &rk29_keys_pdata,
- },
-};
-#endif
-
-static void __init rk29_board_iomux_init(void)
-{
- #ifdef CONFIG_UART0_RK29
- rk29_mux_api_set(GPIO1B7_UART0SOUT_NAME, GPIO1L_UART0_SOUT);
- rk29_mux_api_set(GPIO1B6_UART0SIN_NAME, GPIO1L_UART0_SIN);
- #ifdef CONFIG_UART0_CTS_RTS_RK29
- rk29_mux_api_set(GPIO1C1_UART0RTSN_SDMMC1WRITEPRT_NAME, GPIO1H_UART0_RTS_N);
- rk29_mux_api_set(GPIO1C0_UART0CTSN_SDMMC1DETECTN_NAME, GPIO1H_UART0_CTS_N);
- #endif
- #endif
- #ifdef CONFIG_UART1_RK29
- rk29_mux_api_set(GPIO2A5_UART1SOUT_NAME, GPIO2L_UART1_SOUT);
- rk29_mux_api_set(GPIO2A4_UART1SIN_NAME, GPIO2L_UART1_SIN);
- #endif
- #ifdef CONFIG_UART2_RK29
- rk29_mux_api_set(GPIO2B1_UART2SOUT_NAME, GPIO2L_UART2_SOUT);
- rk29_mux_api_set(GPIO2B0_UART2SIN_NAME, GPIO2L_UART2_SIN);
- #ifdef CONFIG_UART2_CTS_RTS_RK29
- rk29_mux_api_set(GPIO2A7_UART2RTSN_NAME, GPIO2L_UART2_RTS_N);
- rk29_mux_api_set(GPIO2A6_UART2CTSN_NAME, GPIO2L_UART2_CTS_N);
- #endif
- #endif
- #ifdef CONFIG_UART3_RK29
- rk29_mux_api_set(GPIO2B3_UART3SOUT_NAME, GPIO2L_UART3_SOUT);
- rk29_mux_api_set(GPIO2B2_UART3SIN_NAME, GPIO2L_UART3_SIN);
- #ifdef CONFIG_UART3_CTS_RTS_RK29
- rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_UART3_RTS_N);
- rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_UART3_CTS_N);
- #endif
- #endif
- #ifdef CONFIG_SPIM0_RK29
- rk29_mux_api_set(GPIO2C0_SPI0CLK_NAME, GPIO2H_SPI0_CLK);
- rk29_mux_api_set(GPIO2C1_SPI0CSN0_NAME, GPIO2H_SPI0_CSN0);
- rk29_mux_api_set(GPIO2C2_SPI0TXD_NAME, GPIO2H_SPI0_TXD);
- rk29_mux_api_set(GPIO2C3_SPI0RXD_NAME, GPIO2H_SPI0_RXD);
- #endif
- #ifdef CONFIG_SPIM1_RK29
- rk29_mux_api_set(GPIO2C4_SPI1CLK_NAME, GPIO2H_SPI1_CLK);
- rk29_mux_api_set(GPIO2C5_SPI1CSN0_NAME, GPIO2H_SPI1_CSN0);
- rk29_mux_api_set(GPIO2C6_SPI1TXD_NAME, GPIO2H_SPI1_TXD);
- rk29_mux_api_set(GPIO2C7_SPI1RXD_NAME, GPIO2H_SPI1_RXD);
- #endif
- #ifdef CONFIG_RK29_VMAC
- rk29_mux_api_set(GPIO4C0_RMIICLKOUT_RMIICLKIN_NAME, GPIO4H_RMII_CLKOUT);
- rk29_mux_api_set(GPIO4C1_RMIITXEN_MIITXEN_NAME, GPIO4H_RMII_TX_EN);
- rk29_mux_api_set(GPIO4C2_RMIITXD1_MIITXD1_NAME, GPIO4H_RMII_TXD1);
- rk29_mux_api_set(GPIO4C3_RMIITXD0_MIITXD0_NAME, GPIO4H_RMII_TXD0);
- rk29_mux_api_set(GPIO4C4_RMIIRXERR_MIIRXERR_NAME, GPIO4H_RMII_RX_ERR);
- rk29_mux_api_set(GPIO4C5_RMIICSRDVALID_MIIRXDVALID_NAME, GPIO4H_RMII_CSR_DVALID);
- rk29_mux_api_set(GPIO4C6_RMIIRXD1_MIIRXD1_NAME, GPIO4H_RMII_RXD1);
- rk29_mux_api_set(GPIO4C7_RMIIRXD0_MIIRXD0_NAME, GPIO4H_RMII_RXD0);
-
- rk29_mux_api_set(GPIO0A7_MIIMDCLK_NAME, GPIO0L_MII_MDCLK);
- rk29_mux_api_set(GPIO0A6_MIIMD_NAME, GPIO0L_MII_MD);
- #endif
- #ifdef CONFIG_RK29_PWM_REGULATOR
- rk29_mux_api_set(REGULATOR_PWM_MUX_NAME,REGULATOR_PWM_MUX_MODE);
- #endif
-}
-
-static struct platform_device *devices[] __initdata = {
-#ifdef CONFIG_UART1_RK29
- &rk29_device_uart1,
-#endif
-#ifdef CONFIG_UART0_RK29
- &rk29_device_uart0,
-#endif
-#ifdef CONFIG_UART2_RK29
- &rk29_device_uart2,
-#endif
-
-#ifdef CONFIG_RK29_PWM_REGULATOR
- &rk29_device_pwm_regulator,
-#endif
-#ifdef CONFIG_SPIM0_RK29
- &rk29xx_device_spi0m,
-#endif
-#ifdef CONFIG_SPIM1_RK29
- &rk29xx_device_spi1m,
-#endif
-#ifdef CONFIG_ADC_RK29
- &rk29_device_adc,
-#endif
-#ifdef CONFIG_I2C0_RK29
- &rk29_device_i2c0,
-#endif
-#ifdef CONFIG_I2C1_RK29
- &rk29_device_i2c1,
-#endif
-#ifdef CONFIG_I2C2_RK29
- &rk29_device_i2c2,
-#endif
-#ifdef CONFIG_I2C3_RK29
- &rk29_device_i2c3,
-#endif
-
-#ifdef CONFIG_SND_RK29_SOC_I2S_2CH
- &rk29_device_iis_2ch,
-#endif
-#ifdef CONFIG_SND_RK29_SOC_I2S_8CH
- &rk29_device_iis_8ch,
-#endif
-
-#ifdef CONFIG_KEYS_RK29
- &rk29_device_keys,
-#endif
-#ifdef CONFIG_SDMMC0_RK29
- &rk29_device_sdmmc0,
-#endif
-#ifdef CONFIG_SDMMC1_RK29
- &rk29_device_sdmmc1,
-#endif
-
-#ifdef CONFIG_MTD_NAND_RK29XX
- &rk29xx_device_nand,
-#endif
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- &rk29sdk_wifi_device,
-#endif
-
-#ifdef CONFIG_BT
- &rk29sdk_rfkill,
-#endif
-
-#ifdef CONFIG_MTD_NAND_RK29
- &rk29_device_nand,
-#endif
-
-#ifdef CONFIG_FB_RK29
- &rk29_device_fb,
- &rk29_device_dma_cpy,
-#endif
-#ifdef CONFIG_BACKLIGHT_RK29_BL
- &rk29_device_backlight,
-#endif
-#ifdef CONFIG_RK29_VMAC
- &rk29_device_vmac,
-#endif
-#ifdef CONFIG_VIVANTE
- &rk29_device_gpu,
-#endif
-#ifdef CONFIG_VIDEO_RK29
- &rk29_device_camera, /* ddl@rock-chips.com : camera support */
- #if (SENSOR_IIC_ADDR_0 != 0x00)
- &rk29_soc_camera_pdrv_0,
- #endif
- &rk29_soc_camera_pdrv_1,
- &android_pmem_cam_device,
-#endif
- &android_pmem_device,
- &rk29_vpu_mem_device,
-#ifdef CONFIG_USB20_OTG
- &rk29_device_usb20_otg,
-#endif
-#ifdef CONFIG_USB20_HOST
- &rk29_device_usb20_host,
-#endif
-#ifdef CONFIG_USB11_HOST
- &rk29_device_usb11_host,
-#endif
-#ifdef CONFIG_USB_ANDROID
- &android_usb_device,
- &usb_mass_storage_device,
-#endif
-#ifdef CONFIG_RK29_IPP
- &rk29_device_ipp,
-#endif
-#ifdef CONFIG_VIDEO_RK29XX_VOUT
- &rk29_v4l2_output_devce,
-#endif
-};
-
-/*****************************************************************************************
- * spi devices
- * author: cmc@rock-chips.com
- *****************************************************************************************/
-static int rk29_vmac_register_set(void)
-{
- //config rk29 vmac as rmii, 100MHz
- u32 value= readl(RK29_GRF_BASE + 0xbc);
- value = (value & 0xfff7ff) | (0x400);
- writel(value, RK29_GRF_BASE + 0xbc);
- return 0;
-}
-
-static int rk29_rmii_io_init(void)
-{
- int err;
-
- //phy power gpio
- err = gpio_request(RK29_PIN6_PB0, "phy_power_en");
- if (err) {
- gpio_free(RK29_PIN6_PB0);
- printk("-------request RK29_PIN6_PB0 fail--------\n");
- return -1;
- }
- //phy power down
- gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
- gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
-
- return 0;
-}
-
-static int rk29_rmii_io_deinit(void)
-{
- //phy power down
- gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
- gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
- //free
- gpio_free(RK29_PIN6_PB0);
- return 0;
-}
-
-static int rk29_rmii_power_control(int enable)
-{
- if (enable) {
- //enable phy power
- gpio_direction_output(RK29_PIN6_PB0, GPIO_HIGH);
- gpio_set_value(RK29_PIN6_PB0, GPIO_HIGH);
- }
- else {
- gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
- gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
- }
- return 0;
-}
-
-struct rk29_vmac_platform_data rk29_vmac_pdata = {
- .vmac_register_set = rk29_vmac_register_set,
- .rmii_io_init = rk29_rmii_io_init,
- .rmii_io_deinit = rk29_rmii_io_deinit,
- .rmii_power_control = rk29_rmii_power_control,
-};
-
-/*****************************************************************************************
- * spi devices
- * author: cmc@rock-chips.com
- *****************************************************************************************/
-#define SPI_CHIPSELECT_NUM 2
-static struct spi_cs_gpio rk29xx_spi0_cs_gpios[SPI_CHIPSELECT_NUM] = {
- {
- .name = "spi0 cs0",
- .cs_gpio = RK29_PIN2_PC1,
- .cs_iomux_name = GPIO2C1_SPI0CSN0_NAME,
- .cs_iomux_mode = GPIO2H_SPI0_CSN0,
- },
- {
- .name = "spi0 cs1",
- .cs_gpio = RK29_PIN1_PA4,
- .cs_iomux_name = GPIO1A4_EMMCWRITEPRT_SPI0CS1_NAME,//if no iomux,set it NULL
- .cs_iomux_mode = GPIO1L_SPI0_CSN1,
- }
-};
-
-static struct spi_cs_gpio rk29xx_spi1_cs_gpios[SPI_CHIPSELECT_NUM] = {
- {
- .name = "spi1 cs0",
- .cs_gpio = RK29_PIN2_PC5,
- .cs_iomux_name = GPIO2C5_SPI1CSN0_NAME,
- .cs_iomux_mode = GPIO2H_SPI1_CSN0,
- },
- {
- .name = "spi1 cs1",
- .cs_gpio = RK29_PIN1_PA3,
- .cs_iomux_name = GPIO1A3_EMMCDETECTN_SPI1CS1_NAME,//if no iomux,set it NULL
- .cs_iomux_mode = GPIO1L_SPI1_CSN1,
- }
-};
-
-static int spi_io_init(struct spi_cs_gpio *cs_gpios, int cs_num)
-{
-#if 1
- int i;
- if (cs_gpios) {
- for (i=0; i<cs_num; i++) {
- rk29_mux_api_set(cs_gpios[i].cs_iomux_name, cs_gpios[i].cs_iomux_mode);
- }
- }
-#endif
- return 0;
-}
-
-static int spi_io_deinit(struct spi_cs_gpio *cs_gpios, int cs_num)
-{
- return 0;
-}
-
-static int spi_io_fix_leakage_bug(void)
-{
-#if 0
- gpio_direction_output(RK29_PIN2_PC1, GPIO_LOW);
-#endif
- return 0;
-}
-
-static int spi_io_resume_leakage_bug(void)
-{
-#if 0
- gpio_direction_output(RK29_PIN2_PC1, GPIO_HIGH);
-#endif
- return 0;
-}
-
-struct rk29xx_spi_platform_data rk29xx_spi0_platdata = {
- .num_chipselect = SPI_CHIPSELECT_NUM,
- .chipselect_gpios = rk29xx_spi0_cs_gpios,
- .io_init = spi_io_init,
- .io_deinit = spi_io_deinit,
- .io_fix_leakage_bug = spi_io_fix_leakage_bug,
- .io_resume_leakage_bug = spi_io_resume_leakage_bug,
-};
-
-struct rk29xx_spi_platform_data rk29xx_spi1_platdata = {
- .num_chipselect = SPI_CHIPSELECT_NUM,
- .chipselect_gpios = rk29xx_spi1_cs_gpios,
- .io_init = spi_io_init,
- .io_deinit = spi_io_deinit,
- .io_fix_leakage_bug = spi_io_fix_leakage_bug,
- .io_resume_leakage_bug = spi_io_resume_leakage_bug,
-};
-
-/*****************************************************************************************
- * xpt2046 touch panel
- * author: cmc@rock-chips.com
- *****************************************************************************************/
-#define XPT2046_GPIO_INT RK29_PIN0_PA3
-#define DEBOUNCE_REPTIME 3
-
-#if defined(CONFIG_TOUCHSCREEN_XPT2046_320X480_SPI)
-static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 0,
- .x_min = 0,
- .x_max = 320,
- .y_min = 0,
- .y_max = 480,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
- .penirq_recheck_delay_usecs = 1,
-};
-#elif defined(CONFIG_TOUCHSCREEN_XPT2046_320X480_CBN_SPI)
-static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 0,
- .x_min = 0,
- .x_max = 320,
- .y_min = 0,
- .y_max = 480,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
- .penirq_recheck_delay_usecs = 1,
-};
-#elif defined(CONFIG_TOUCHSCREEN_XPT2046_SPI)
-static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 1,
- .x_min = 0,
- .x_max = 800,
- .y_min = 0,
- .y_max = 480,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
-
- .penirq_recheck_delay_usecs = 1,
-};
-#elif defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
-static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 1,
- .x_min = 0,
- .x_max = 800,
- .y_min = 0,
- .y_max = 480,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
-
- .penirq_recheck_delay_usecs = 1,
-};
-#endif
-
-static struct spi_board_info board_spi_devices[] = {
-#if defined(CONFIG_TOUCHSCREEN_XPT2046_320X480_SPI) || defined(CONFIG_TOUCHSCREEN_XPT2046_320X480_CBN_SPI)\
- ||defined(CONFIG_TOUCHSCREEN_XPT2046_SPI) || defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
- {
- .modalias = "xpt2046_ts",
- .chip_select = 0,
- .max_speed_hz = 125 * 1000 * 26,/* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .irq = XPT2046_GPIO_INT,
- .platform_data = &xpt2046_info,
- },
-#endif
-};
-
-
-static void __init rk29_gic_init_irq(void)
-{
- gic_dist_init(0, (void __iomem *)RK29_GICPERI_BASE, 32);
- gic_cpu_init(0, (void __iomem *)RK29_GICCPU_BASE);
-}
-
-static void __init machine_rk29_init_irq(void)
-{
- rk29_gic_init_irq();
- rk29_gpio_init();
-}
-
-#define POWER_ON_PIN RK29_PIN4_PA4
-static void rk29_pm_power_off(void)
-{
- printk(KERN_ERR "rk29_pm_power_off start...\n");
- gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
- while (1);
-}
-
-static void __init machine_rk29_board_init(void)
-{
- rk29_board_iomux_init();
-
- gpio_request(POWER_ON_PIN,"poweronpin");
- gpio_set_value(POWER_ON_PIN, GPIO_HIGH);
- gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
- pm_power_off = rk29_pm_power_off;
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- rk29sdk_wifi_bt_gpio_control_init();
-#endif
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_I2C0_RK29
- i2c_register_board_info(default_i2c0_data.bus_num, board_i2c0_devices,
- ARRAY_SIZE(board_i2c0_devices));
-#endif
-#ifdef CONFIG_I2C1_RK29
- i2c_register_board_info(default_i2c1_data.bus_num, board_i2c1_devices,
- ARRAY_SIZE(board_i2c1_devices));
-#endif
-#ifdef CONFIG_I2C2_RK29
- i2c_register_board_info(default_i2c2_data.bus_num, board_i2c2_devices,
- ARRAY_SIZE(board_i2c2_devices));
-#endif
-#ifdef CONFIG_I2C3_RK29
- i2c_register_board_info(default_i2c3_data.bus_num, board_i2c3_devices,
- ARRAY_SIZE(board_i2c3_devices));
-#endif
-
- spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
-
- rk29sdk_init_wifi_mem();
-}
-
-static void __init machine_rk29_fixup(struct machine_desc *desc, struct tag *tags,
- char **cmdline, struct meminfo *mi)
-{
- mi->nr_banks = 1;
- mi->bank[0].start = RK29_SDRAM_PHYS;
- mi->bank[0].node = PHYS_TO_NID(RK29_SDRAM_PHYS);
- mi->bank[0].size = LINUX_SIZE;
-}
-
-static void __init machine_rk29_mapio(void)
-{
- rk29_map_common_io();
- rk29_setup_early_printk();
- rk29_sram_init();
- rk29_clock_init(periph_pll_288mhz);
- rk29_iomux_init();
-}
-
-MACHINE_START(RK29, "RK29board")
- /* UART for LL DEBUG */
- .phys_io = RK29_UART1_PHYS,
- .io_pg_offst = ((RK29_UART1_BASE) >> 18) & 0xfffc,
- .boot_params = RK29_SDRAM_PHYS + 0x88000,
- .fixup = machine_rk29_fixup,
- .map_io = machine_rk29_mapio,
- .init_irq = machine_rk29_init_irq,
- .init_machine = machine_rk29_board_init,
- .timer = &rk29_timer,
-MACHINE_END
+++ /dev/null
-#include <mach/key.h>
-#include <mach/gpio.h>
-
-#define EV_ENCALL KEY_F4
-#define EV_MENU KEY_F1
-
-#define PRESS_LEV_LOW 1
-#define PRESS_LEV_HIGH 0
-
-static struct rk29_keys_button key_button[] = {
-#if 0
- {
- .desc = "menu",
- .code = EV_MENU,
- .gpio = RK29_PIN6_PA0,
- .active_low = PRESS_LEV_LOW,
- },
-#endif
- {
- .desc = "vol+",
- .code = KEY_VOLUMEUP,
- .gpio = RK29_PIN6_PA1,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "vol-",
- .code = KEY_VOLUMEDOWN,
- .gpio = RK29_PIN6_PA2,
- .active_low = PRESS_LEV_LOW,
- },
-#if 0
- {
- .desc = "home",
- .code = KEY_HOME,
- .gpio = RK29_PIN6_PA3,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "search",
- .code = KEY_SEARCH,
- .gpio = RK29_PIN6_PA4,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "esc",
- .code = KEY_BACK,
- .gpio = RK29_PIN6_PA5,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "sensor",
- .code = KEY_CAMERA,
- .gpio = RK29_PIN6_PA6,
- .active_low = PRESS_LEV_LOW,
- },
-#endif
- {
- .desc = "play",
- .code = EV_ENCALL,
- .gpio = RK29_PIN6_PA7,
- .active_low = PRESS_LEV_LOW,
- .wakeup = 1,
- },
-#if 0
- {
- .desc = "vol+",
- .code = KEY_VOLUMEDOWN,
- .adc_value = 95,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "vol-",
- .code = KEY_VOLUMEUP,
- .adc_value = 249,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "menu",
- .code = EV_MENU,
- .adc_value = 406,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "home",
- .code = KEY_HOME,
- .code_long_press = KEY_F4,
- .adc_value = 561,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "esc",
- .code = KEY_ESC,
- .adc_value = 726,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "adkey6",
- .code = KEY_BACK,
- .code_long_press = EV_ENCALL,
- .adc_value = 899,
- .active_low = PRESS_LEV_LOW,
- },
-#endif
-};
-struct rk29_keys_platform_data rk29_keys_pdata = {
- .buttons = key_button,
- .nbuttons = ARRAY_SIZE(key_button),
- .chn = -1, //chn: 0-7, if do not use ADC,set 'chn' -1
-};
-
projects / firefly-linux-kernel-4.4.55.git / commitdiff