[PATCH] sundance: remove if (1) { ... } block in sundance_probe1
authorJohn W. Linville <linville@tuxdriver.com>
Wed, 19 Oct 2005 01:31:01 +0000 (21:31 -0400)
committerJeff Garzik <jgarzik@pobox.com>
Wed, 19 Oct 2005 02:29:14 +0000 (22:29 -0400)
Remove an if (1) { ... } block in sundance_probe1.  Its purpose seems
to be only to allow for delaring some extra local variables.  But, it also
adds ugly indentation without adding any meaning to the code.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
drivers/net/sundance.c

index e148a7212073195976de970e2c60f6b3ce5ffe68..8c4eb11ab44e789d0cbd8d8a776dd93f4bf47af3 100644 (file)
@@ -518,6 +518,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 #else
        int bar = 1;
 #endif
+       int phy, phy_idx = 0;
 
 
 /* when built into the kernel, we only print version if device is found */
@@ -606,33 +607,30 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
                        printk("%2.2x:", dev->dev_addr[i]);
        printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
 
-       if (1) {
-               int phy, phy_idx = 0;
-               np->phys[0] = 1;                /* Default setting */
-               np->mii_preamble_required++;
-               for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
-                       int mii_status = mdio_read(dev, phy, MII_BMSR);
-                       if (mii_status != 0xffff  &&  mii_status != 0x0000) {
-                               np->phys[phy_idx++] = phy;
-                               np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
-                               if ((mii_status & 0x0040) == 0)
-                                       np->mii_preamble_required++;
-                               printk(KERN_INFO "%s: MII PHY found at address %d, status "
-                                          "0x%4.4x advertising %4.4x.\n",
-                                          dev->name, phy, mii_status, np->mii_if.advertising);
-                       }
-               }
-               np->mii_preamble_required--;
-
-               if (phy_idx == 0) {
-                       printk(KERN_INFO "%s: No MII transceiver found, aborting.  ASIC status %x\n",
-                                  dev->name, ioread32(ioaddr + ASICCtrl));
-                       goto err_out_unregister;
+       np->phys[0] = 1;                /* Default setting */
+       np->mii_preamble_required++;
+       for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+               int mii_status = mdio_read(dev, phy, MII_BMSR);
+               if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+                       np->phys[phy_idx++] = phy;
+                       np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+                       if ((mii_status & 0x0040) == 0)
+                               np->mii_preamble_required++;
+                       printk(KERN_INFO "%s: MII PHY found at address %d, status "
+                                  "0x%4.4x advertising %4.4x.\n",
+                                  dev->name, phy, mii_status, np->mii_if.advertising);
                }
+       }
+       np->mii_preamble_required--;
 
-               np->mii_if.phy_id = np->phys[0];
+       if (phy_idx == 0) {
+               printk(KERN_INFO "%s: No MII transceiver found, aborting.  ASIC status %x\n",
+                          dev->name, ioread32(ioaddr + ASICCtrl));
+               goto err_out_unregister;
        }
 
+       np->mii_if.phy_id = np->phys[0];
+
        /* Parse override configuration */
        np->an_enable = 1;
        if (card_idx < MAX_UNITS) {