pinctrl: nomadik: force-convert to generic mux bindings
authorLinus Walleij <linus.walleij@linaro.org>
Mon, 29 Sep 2014 15:21:56 +0000 (17:21 +0200)
committerLinus Walleij <linus.walleij@linaro.org>
Mon, 20 Oct 2014 07:08:26 +0000 (09:08 +0200)
This converts the Nomadik pin controller and all associated device
trees to use the standard, generic mux bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
arch/arm/boot/dts/ste-hrefprev60.dtsi
arch/arm/boot/dts/ste-hrefv60plus.dtsi
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
arch/arm/boot/dts/ste-snowball.dts
drivers/pinctrl/nomadik/pinctrl-nomadik.c

index e0799966bc25e7fc34c19f1d2631b74c49e49f44..08a7365cb9299c87f520aaf28ea4d5a47bc9d030 100644 (file)
@@ -16,8 +16,8 @@
                        uart0 {
                                uart0_default_mux: uart0_mux {
                                        default_mux {
-                                               ste,function = "u0";
-                                               ste,pins = "u0_a_1";
+                                               function = "u0";
+                                               groups = "u0_a_1";
                                        };
                                };
 
@@ -49,8 +49,8 @@
                        uart2 {
                                uart2_default_mode: uart2_default {
                                        default_mux {
-                                               ste,function = "u2";
-                                               ste,pins = "u2txrx_a_1";
+                                               function = "u2";
+                                               groups = "u2txrx_a_1";
                                        };
 
                                        default_cfg1 {
@@ -80,8 +80,8 @@
                        i2c0 {
                                i2c0_default_mux: i2c_mux {
                                        default_mux {
-                                               ste,function = "i2c0";
-                                               ste,pins = "i2c0_a_1";
+                                               function = "i2c0";
+                                               groups = "i2c0_a_1";
                                        };
                                };
 
                        i2c1 {
                                i2c1_default_mux: i2c_mux {
                                        default_mux {
-                                               ste,function = "i2c1";
-                                               ste,pins = "i2c1_b_2";
+                                               function = "i2c1";
+                                               groups = "i2c1_b_2";
                                        };
                                };
 
                        i2c2 {
                                i2c2_default_mux: i2c_mux {
                                        default_mux {
-                                               ste,function = "i2c2";
-                                               ste,pins = "i2c2_b_2";
+                                               function = "i2c2";
+                                               groups = "i2c2_b_2";
                                        };
                                };
 
                        i2c4 {
                                i2c4_default_mux: i2c_mux {
                                        default_mux {
-                                               ste,function = "i2c4";
-                                               ste,pins = "i2c4_b_2";
+                                               function = "i2c4";
+                                               groups = "i2c4_b_2";
                                        };
                                };
 
                        i2c5 {
                                i2c5_default_mux: i2c_mux {
                                        default_mux {
-                                               ste,function = "i2c5";
-                                               ste,pins = "i2c5_c_2";
+                                               function = "i2c5";
+                                               groups = "i2c5_c_2";
                                        };
                                };
 
index addfcc7c27500e0349eee76501d6641a2cdba61c..61aa87138927ba218cbf4dd63d5ae13365c06c80 100644 (file)
@@ -18,8 +18,8 @@
                        uart0 {
                                uart0_default_mode: uart0_default {
                                        default_mux {
-                                               ste,function = "u0";
-                                               ste,pins = "u0_a_1";
+                                               function = "u0";
+                                               groups = "u0_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
@@ -53,8 +53,8 @@
                        uart1 {
                                uart1_default_mode: uart1_default {
                                        default_mux {
-                                               ste,function = "u1";
-                                               ste,pins = "u1rxtx_a_1";
+                                               function = "u1";
+                                               groups = "u1rxtx_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO4_AH6"; /* RXD */
@@ -83,8 +83,8 @@
                        uart2 {
                                uart2_default_mode: uart2_default {
                                        default_mux {
-                                               ste,function = "u2";
-                                               ste,pins = "u2rxtx_c_1";
+                                               function = "u2";
+                                               groups = "u2rxtx_c_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO29_W2"; /* RXD */
                        i2c0 {
                                i2c0_default_mode: i2c_default {
                                        default_mux {
-                                               ste,function = "i2c0";
-                                               ste,pins = "i2c0_a_1";
+                                               function = "i2c0";
+                                               groups = "i2c0_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
                        i2c1 {
                                i2c1_default_mode: i2c_default {
                                        default_mux {
-                                               ste,function = "i2c1";
-                                               ste,pins = "i2c1_b_2";
+                                               function = "i2c1";
+                                               groups = "i2c1_b_2";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
                        i2c2 {
                                i2c2_default_mode: i2c_default {
                                        default_mux {
-                                               ste,function = "i2c2";
-                                               ste,pins = "i2c2_b_2";
+                                               function = "i2c2";
+                                               groups = "i2c2_b_2";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
                        i2c3 {
                                i2c3_default_mode: i2c_default {
                                        default_mux {
-                                               ste,function = "i2c3";
-                                               ste,pins = "i2c3_c_2";
+                                               function = "i2c3";
+                                               groups = "i2c3_c_2";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
                        i2c4 {
                                i2c4_default_mode: i2c_default {
                                        default_mux {
-                                               ste,function = "i2c4";
-                                               ste,pins = "i2c4_b_1";
+                                               function = "i2c4";
+                                               groups = "i2c4_b_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
                        spi2 {
                                spi2_default_mode: spi_default {
                                        default_mux {
-                                               ste,function = "spi2";
-                                               ste,pins = "spi2_oc1_2";
+                                               function = "spi2";
+                                               groups = "spi2_oc1_2";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO216_AG12"; /* FRM */
                                /* This is the external SD card slot, 4 bits wide */
                                sdi0_default_mode: sdi0_default {
                                        default_mux {
-                                               ste,function = "mc0";
-                                               ste,pins = "mc0_a_1";
+                                               function = "mc0";
+                                               groups = "mc0_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins =
                                /* This is the WLAN SDIO 4 bits wide */
                                sdi1_default_mode: sdi1_default {
                                        default_mux {
-                                               ste,function = "mc1";
-                                               ste,pins = "mc1_a_1";
+                                               function = "mc1";
+                                               groups = "mc1_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO208_AH16"; /* CLK */
                                /* This is the eMMC 8 bits wide, usually PoP eMMC */
                                sdi2_default_mode: sdi2_default {
                                        default_mux {
-                                               ste,function = "mc2";
-                                               ste,pins = "mc2_a_1";
+                                               function = "mc2";
+                                               groups = "mc2_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO128_A5"; /* CLK */
                                /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
                                sdi4_default_mode: sdi4_default {
                                        default_mux {
-                                               ste,function = "mc4";
-                                               ste,pins = "mc4_a_1";
+                                               function = "mc4";
+                                               groups = "mc4_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO203_AE23"; /* CLK */
                        msp0 {
                                msp0_default_mode: msp0_default {
                                        default_msp0_mux {
-                                               ste,function = "msp0";
-                                               ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1";
+                                               function = "msp0";
+                                               groups = "msp0txrx_a_1", "msp0tfstck_a_1";
                                        };
                                        default_msp0_cfg {
                                                ste,pins =
                        msp1 {
                                msp1_default_mode: msp1_default {
                                        default_mux {
-                                               ste,function = "msp1";
-                                               ste,pins = "msp1txrx_a_1", "msp1_a_1";
+                                               function = "msp1";
+                                               groups = "msp1txrx_a_1", "msp1_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins = "GPIO33_AF2";
                                msp2_default_mode: msp2_default {
                                        /* MSP2 usually used for HDMI audio */
                                        default_mux {
-                                               ste,function = "msp2";
-                                               ste,pins = "msp2_a_1";
+                                               function = "msp2";
+                                               groups = "msp2_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins =
                        musb {
                                musb_default_mode: musb_default {
                                        default_mux {
-                                               ste,function = "usb";
-                                               ste,pins = "usb_a_1";
+                                               function = "usb";
+                                               groups = "usb_a_1";
                                        };
                                        default_cfg1 {
                                                ste,pins =
                                lcd_default_mode: lcd_default {
                                        default_mux {
                                                /* Mux in VSI0 and all the data lines */
-                                               ste,function = "lcd";
-                                               ste,pins =
+                                               function = "lcd";
+                                               groups =
                                                "lcdvsi0_a_1", /* VSI0 for LCD */
                                                "lcd_d0_d7_a_1", /* Data lines */
                                                "lcd_d8_d11_a_1", /* TV-out */
                                /* SKE keys on position 2 in an 8x8 matrix */
                                ske_kpa2_default_mode: ske_kpa2_default {
                                        default_mux {
-                                               ste,function = "kp";
-                                               ste,pins = "kp_a_2";
+                                               function = "kp";
+                                               groups = "kp_a_2";
                                        };
                                        default_cfg1 {
                                                ste,pins =
                                 */
                                ske_kpaoc1_default_mode: ske_kpaoc1_default {
                                        default_mux {
-                                               ste,function = "kp";
-                                               ste,pins = "kp_a_1", "kp_oc1_1";
+                                               function = "kp";
+                                               groups = "kp_a_1", "kp_oc1_1";
                                        };
                                        default_cfg1 {
                                                ste,pins =
index abc762e24fcb759b8c641f69fa0cc54d14f33f4a..5d8b7f8ced1b62caa84fbd50186725ca49536948 100644 (file)
@@ -79,8 +79,8 @@
                        ssp0 {
                                ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
                                        hrefprev60_mux {
-                                               ste,function = "ssp0";
-                                               ste,pins = "ssp0_a_1";
+                                               function = "ssp0";
+                                               groups = "ssp0_a_1";
                                        };
                                        hrefprev60_cfg1 {
                                                ste,pins = "GPIO145_C13"; /* RXD */
@@ -93,8 +93,8 @@
                                /* This additional pin needed on early MOP500 and HREFs previous to v60 */
                                sdi0_default_mode: sdi0_default {
                                        hrefprev60_mux {
-                                               ste,function = "mc0";
-                                               ste,pins = "mc0dat31dir_a_1";
+                                               function = "mc0";
+                                               groups = "mc0dat31dir_a_1";
                                        };
                                        hrefprev60_cfg1 {
                                                ste,pins = "GPIO21_AB3"; /* DAT31DIR */
                        ipgpio {
                                 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
                                        hrefprev60_mux {
-                                               ste,function = "ipgpio";
-                                               ste,pins = "ipgpio0_c_1", "ipgpio1_c_1";
+                                               function = "ipgpio";
+                                               groups = "ipgpio0_c_1", "ipgpio1_c_1";
                                        };
                                        hrefprev60_cfg1 {
                                                ste,pins = "GPIO6_AF6", "GPIO7_AG5";
index bcc1f0c37f49c42b40dc197c6e5ffb9b1b29b0da..2b4104ef07de3ae9eaea2e83e631040441671cc2 100644 (file)
@@ -64,8 +64,8 @@
                                 */
                                ipgpio_hrefv60_mode: ipgpio_hrefv60 {
                                        hrefv60_mux {
-                                               ste,function = "ipgpio";
-                                               ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
+                                               function = "ipgpio";
+                                               groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
                                        };
                                        hrefv60_cfg1 {
                                                ste,pins = "GPIO6_AF6", "GPIO7_AG5";
index dbcf521b017f207fff1286d3c02e3e6586cc761e..7cedb5aba9a9463329351d0f5f3865c496d61cd1 100644 (file)
                uart0 {
                        uart0_default_mux: uart0_mux {
                                u0_default_mux {
-                                       ste,function = "u0";
-                                       ste,pins = "u0_a_1";
+                                       function = "u0";
+                                       groups = "u0_a_1";
                                };
                        };
                };
                uart1 {
                        uart1_default_mux: uart1_mux {
                                u1_default_mux {
-                                       ste,function = "u1";
-                                       ste,pins = "u1_a_1";
+                                       function = "u1";
+                                       groups = "u1_a_1";
                                };
                        };
                };
                mmcsd {
                        mmcsd_default_mux: mmcsd_mux {
                                mmcsd_default_mux {
-                                       ste,function = "mmcsd";
-                                       ste,pins = "mmcsd_a_1";
+                                       function = "mmcsd";
+                                       groups = "mmcsd_a_1";
                                };
                        };
                        mmcsd_default_mode: mmcsd_default {
                i2c0 {
                        i2c0_default_mux: i2c0_mux {
                                i2c0_default_mux {
-                                       ste,function = "i2c0";
-                                       ste,pins = "i2c0_a_1";
+                                       function = "i2c0";
+                                       groups = "i2c0_a_1";
                                };
                        };
                        i2c0_default_mode: i2c0_default {
                i2c1 {
                        i2c1_default_mux: i2c1_mux {
                                i2c1_default_mux {
-                                       ste,function = "i2c1";
-                                       ste,pins = "i2c1_a_1";
+                                       function = "i2c1";
+                                       groups = "i2c1_a_1";
                                };
                        };
                        i2c1_default_mode: i2c1_default {
index 3e97a669f15ef484107cdef76dbac8051d97202d..d43f8b19e7dd49efbefe331cf67a8f03e99a356d 100644 (file)
                                 */
                                eth_snowball_mode: eth_snowball {
                                        snowball_mux {
-                                               ste,function = "sm";
-                                               ste,pins = "sm_b_1";
+                                               function = "sm";
+                                               groups = "sm_b_1";
                                        };
                                        /* LAN IRQ pin */
                                        snowball_cfg1 {
                        sdi0 {
                                sdi0_default_mode: sdi0_default {
                                        snowball_mux {
-                                               ste,function = "mc0";
-                                               ste,pins = "mc0dat31dir_a_1";
+                                               function = "mc0";
+                                               groups = "mc0dat31dir_a_1";
                                        };
                                        snowball_cfg1 {
                                                ste,pins = "GPIO21_AB3"; /* DAT31DIR */
                        ssp0 {
                                ssp0_snowball_mode: ssp0_snowball_default {
                                        snowball_mux {
-                                               ste,function = "ssp0";
-                                               ste,pins = "ssp0_a_1";
+                                               function = "ssp0";
+                                               groups = "ssp0_a_1";
                                        };
                                        snowball_cfg1 {
                                                ste,pins = "GPIO144_B13"; /* FRM */
index 746db6acf64865d9bf7713f79d6744508bbc9f25..dec72f2e6a2b8220098fd2df34b8e17665d0e41f 100644 (file)
@@ -1520,12 +1520,13 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
        unsigned long configs = 0;
        bool has_config = 0;
        struct property *prop;
-       const char *group, *gpio_name;
        struct device_node *np_config;
 
-       ret = of_property_read_string(np, "ste,function", &function);
+       ret = of_property_read_string(np, "function", &function);
        if (ret >= 0) {
-               ret = of_property_count_strings(np, "ste,pins");
+               const char *group;
+
+               ret = of_property_count_strings(np, "groups");
                if (ret < 0)
                        goto exit;
 
@@ -1535,7 +1536,7 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                if (ret < 0)
                        goto exit;
 
-               of_property_for_each_string(np, "ste,pins", prop, group) {
+               of_property_for_each_string(np, "groups", prop, group) {
                        ret = nmk_dt_add_map_mux(map, reserved_maps, num_maps,
                                          group, function);
                        if (ret < 0)
@@ -1548,6 +1549,9 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
        if (np_config)
                has_config |= nmk_pinctrl_dt_get_config(np_config, &configs);
        if (has_config) {
+               const char *gpio_name;
+               const char *pin;
+
                ret = of_property_count_strings(np, "ste,pins");
                if (ret < 0)
                        goto exit;
@@ -1557,8 +1561,8 @@ static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                if (ret < 0)
                        goto exit;
 
-               of_property_for_each_string(np, "ste,pins", prop, group) {
-                       gpio_name = nmk_find_pin_name(pctldev, group);
+               of_property_for_each_string(np, "ste,pins", prop, pin) {
+                       gpio_name = nmk_find_pin_name(pctldev, pin);
 
                        ret = nmk_dt_add_map_configs(map, reserved_maps,
                                                     num_maps,