ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency
authorRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 14 May 2015 15:18:46 +0000 (16:18 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 14 May 2015 15:22:05 +0000 (16:22 +0100)
The SI unit of frequency is Hertz, named after Heinrich Hertz, and is
given the symbol "Hz" to denote this.  "hz" is not the unit of frequency,
and is in fact meaningless.

Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz'
contribution to the modern world.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
14 files changed:
arch/arm/boot/dts/exynos5260-xyref5260.dts
arch/arm/boot/dts/omap3-cm-t3517.dts
arch/arm/mach-davinci/include/mach/da8xx.h
arch/arm/mach-imx/clk-imx6sx.c
arch/arm/mach-iop13xx/include/mach/time.h
arch/arm/mach-ixp4xx/include/mach/platform.h
arch/arm/mach-ks8695/include/mach/hardware.h
arch/arm/mach-omap2/gpmc-onenand.c
arch/arm/mach-omap2/hsmmc.c
arch/arm/mach-omap2/opp2430_data.c
arch/arm/mach-omap2/sdrc2xxx.c
arch/arm/mach-omap2/sram242x.S
arch/arm/mach-omap2/sram243x.S
arch/arm/mach-pxa/mp900.c

index a803b605051b29c4754e889ce6a2cfb930bd1d14..3daef94bee38c4fd9e7aac10ac6eca5da031e386 100644 (file)
@@ -70,7 +70,7 @@
        broken-cd;
        bypass-smu;
        cap-mmc-highspeed;
-       supports-hs200-mode; /* 200 Mhz */
+       supports-hs200-mode; /* 200 MHz */
        card-detect-delay = <200>;
        samsung,dw-mshc-ciu-div = <3>;
        samsung,dw-mshc-sdr-timing = <0 4>;
index f5b5a1d96cd740920ab215f2a7b3fc2fdaa9136e..53ae04f9104d6b92f6bce75c337d5fba1c77ae53 100644 (file)
@@ -66,7 +66,7 @@
 
        otg_drv_vbus: pinmux_otg_drv_vbus {
                pinctrl-single,pins = <
-                       OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+                       OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
                >;
        };
 
index 39e58b48e826dc4350f54a0aa170444855723815..f9f9713aacdd605a35c7ca15dc350ded1380cef8 100644 (file)
@@ -36,7 +36,7 @@ extern void __iomem *da8xx_syscfg1_base;
 
 /*
  * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
- * (than the regular 300Mhz variant), the board code should set this up
+ * (than the regular 300MHz variant), the board code should set this up
  * with the supported speed before calling da850_register_cpufreq().
  */
 extern unsigned int da850_max_speed;
index 5a3e5a159e708b35a13427b6c766d48bc8cf15b0..87c5b0911dddc38ab2b0929d256aec17d1361b05 100644 (file)
@@ -216,7 +216,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
        clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
        clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
 
-       /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */
+       /* FIXME 100MHz is used for pcie ref for all imx6 pcie, excepted imx6q */
        clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
        clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
 
@@ -520,7 +520,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
                pr_err("Failed to set pcie parent clk.\n");
 
        /*
-        * Init enet system AHB clock, set to 200Mhz
+        * Init enet system AHB clock, set to 200MHz
         * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
         */
        clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
index 15bc9bb78a6b616f7361e9f5c9cbed255bb03f87..c871e6874594cc25f178baf9ff8ce5abe0dfd80d 100644 (file)
@@ -42,7 +42,7 @@ static inline unsigned long iop13xx_core_freq(void)
        case IOP13XX_CORE_FREQ_1200:
                return 1200000000;
        default:
-               printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
+               printk("%s: warning unknown frequency, defaulting to 800MHz\n",
                        __func__);
        }
 
index 75c4c6572ad04e5d1907f5b40bb6a34413b7d781..34b3d3f3f1310350697ec066bdc730525cce81e3 100644 (file)
@@ -74,7 +74,7 @@ extern unsigned long ixp4xx_exp_bus_size;
 /*
  * Clock Speed Definitions.
  */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK    (66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_PERIPHERAL_BUS_CLOCK    (66) /* 66MHzi APB BUS   */ 
 #define IXP4XX_UART_XTAL               14745600
 
 /*
index 5090338c0db2d927543096f5f5ad303e1f5e24d2..959c748ee8bbe27b179c237a2445aedf8288f20d 100644 (file)
@@ -17,7 +17,7 @@
 #include <asm/sizes.h>
 
 /*
- * Clocks are derived from MCLK, which is 25Mhz
+ * Clocks are derived from MCLK, which is 25MHz
  */
 #define KS8695_CLOCK_RATE      25000000
 
index f899e77ff5e6e37eca7d131533f3526a13b5d20c..17a6f752a43631c59eb5fd65371672bb26757b00 100644 (file)
@@ -216,11 +216,11 @@ static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t,
 
        div = gpmc_calc_divider(min_gpmc_clk_period);
        gpmc_clk_ns = gpmc_ticks_to_ns(div);
-       if (gpmc_clk_ns < 15) /* >66Mhz */
+       if (gpmc_clk_ns < 15) /* >66MHz */
                onenand_flags |= ONENAND_FLAG_HF;
        else
                onenand_flags &= ~ONENAND_FLAG_HF;
-       if (gpmc_clk_ns < 12) /* >83Mhz */
+       if (gpmc_clk_ns < 12) /* >83MHz */
                onenand_flags |= ONENAND_FLAG_VHF;
        else
                onenand_flags &= ~ONENAND_FLAG_VHF;
index 9a8611ab5dfa60d3bf5e23d6118779db3495ee80..cff079e563f43d3fc3da85933ebe7361f7a17322 100644 (file)
@@ -70,7 +70,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev,
 
                reg = omap_ctrl_readl(control_pbias_offset);
                if (cpu_is_omap3630()) {
-                       /* Set MMC I/O to 52Mhz */
+                       /* Set MMC I/O to 52MHz */
                        prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
                        prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
                        omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
index 0e75ec3e114b0e812a3016ca340010b5321789d7..b2233b72b24d71e2a28144702da5341d56fbd56a 100644 (file)
@@ -116,7 +116,7 @@ const struct prcm_config omap2430_rate_table[] = {
                RATE_IN_243X},
 
        /* PRCM-boot/bypass */
-       {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,                /* 13Mhz */
+       {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,                /* 13MHz */
                RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
                RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
                MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
@@ -124,7 +124,7 @@ const struct prcm_config omap2430_rate_table[] = {
                RATE_IN_243X},
 
        /* PRCM-boot/bypass */
-       {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,                /* 12Mhz */
+       {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,                /* 12MHz */
                RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
                RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
                MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
index ae3f1553158d746b4f7edade9e4943064fcb6d07..339b0ecb7c327dc27bf7c14c7d793a2e3eb2ada3 100644 (file)
@@ -164,6 +164,6 @@ void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
        mem_timings.slow_dll_ctrl |=
                ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
 
-       /* 90 degree phase for anything below 133Mhz + disable DLL filter */
+       /* 90 degree phase for anything below 133MHz + disable DLL filter */
        mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
 }
index 2c88ff2d0236afd35a6748fb452c234906f9ba6c..53a2537cd75a9363c3c1766cd719341caf201ae1 100644 (file)
@@ -64,7 +64,7 @@ ENTRY(omap242x_sram_ddr_init)
        mvn     r9, #0x4                @ mask to get clear bit2
        and     r10, r10, r9            @ clear bit2 for lock mode.
        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
-       orr     r10, r10, #0x2          @ 90 degree phase for all below 133Mhz
+       orr     r10, r10, #0x2          @ 90 degree phase for all below 133MHz
        str     r10, [r11]              @ commit to DLLA_CTRL
        bl      i_dll_wait              @ wait for dll to lock
 
index d5deb9761fc7ee6fc2ad0e223df5344078a3877f..b3edd6f7f7dba8004f06ac607f959a3765d79e33 100644 (file)
@@ -64,7 +64,7 @@ ENTRY(omap243x_sram_ddr_init)
        mvn     r9, #0x4                @ mask to get clear bit2
        and     r10, r10, r9            @ clear bit2 for lock mode.
        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
-       orr     r10, r10, #0x2          @ 90 degree phase for all below 133Mhz
+       orr     r10, r10, #0x2          @ 90 degree phase for all below 133MHz
        str     r10, [r11]              @ commit to DLLA_CTRL
        bl      i_dll_wait              @ wait for dll to lock
 
index 854f1f562d6b34590aac4d587a212cf4cf06829f..14f6aaf8fcc96a36ebb093d4f3247669e599c738 100644 (file)
@@ -28,7 +28,7 @@
 static void isp116x_pfm_delay(struct device *dev, int delay)
 {
 
-       /* 400Mhz PXA2 = 2.5ns / instruction */
+       /* 400MHz PXA2 = 2.5ns / instruction */
 
        int cyc = delay / 10;