select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
+ select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
bcm21664-garnet.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-apq8074-dragonboard.dtb
-dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
- ste-hrefprev60-stuib.dtb \
- ste-hrefprev60-tvk.dtb \
- ste-hrefv60plus-stuib.dtb \
- ste-hrefv60plus-tvk.dtb \
- ste-ccu8540.dtb \
- ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+ ste-hrefprev60-stuib.dtb \
+ ste-hrefprev60-tvk.dtb \
+ ste-hrefv60plus-stuib.dtb \
+ ste-hrefv60plus-tvk.dtb \
+ ste-ccu8540.dtb \
+ ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
versatile-pb.dtb
-dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x72004 0x4>;
+ clocks = <&gateclk 4>;
};
eth1: ethernet@74000 {
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x72004 0x4>;
+ clocks = <&gateclk 4>;
};
coredivclk: clock@e4250 {
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
};
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <26000000>;
};
};
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
compatible = "denx,imx53-m53evk", "fsl,imx53";
memory {
- reg = <0x70000000 0x20000000>;
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
};
soc {
irq-trigger = <0x1>;
stmpe_touchscreen {
- compatible = "stmpe,ts";
+ compatible = "st,stmpe-ts";
reg = <0>;
- ts,sample-time = <4>;
- ts,mod-12b = <1>;
- ts,ref-sel = <0>;
- ts,adc-freq = <1>;
- ts,ave-ctrl = <3>;
- ts,touch-det-delay = <3>;
- ts,settling = <4>;
- ts,fraction-z = <7>;
- ts,i-drive = <1>;
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <3>;
+ st,touch-det-delay = <3>;
+ st,settling = <4>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
};
};
/ {
memory {
- reg = <0x70000000 0x40000000>;
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
};
display0: display@di0 {
soc {
display: display@di0 {
compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgb24_vga1>;
status = "okay";
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+
display-timings {
VGA {
clock-frequency = <25200000>;
};
};
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
port {
lvds1_in: endpoint {
- remote-endpoint = <&ipu_di0_lvds0>;
+ remote-endpoint = <&ipu_di1_lvds1>;
};
};
};
compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
aliases {
- gpio7 = &stmpe_gpio;
+ gpio7 = &stmpe_gpio1;
+ gpio8 = &stmpe_gpio2;
+ stmpe-i2c0 = &stmpe1;
+ stmpe-i2c1 = &stmpe2;
};
memory {
regulator-always-on;
};
- reg_usb_otg_vbus: regulator@1 {
+ reg_usb_otg_switch: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
- regulator-name = "usb_otg_vbus";
+ regulator-name = "usb_otg_switch";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio7 12 0>;
+ regulator-boot-on;
+ regulator-always-on;
};
reg_usb_host1: regulator@2 {
led-blue {
label = "blue";
- gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
led-green {
label = "green";
- gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
};
led-pink {
label = "pink";
- gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
};
led-red {
label = "red";
- gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
};
};
};
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2
- &pinctrl_stmpe>;
+ &pinctrl_stmpe1
+ &pinctrl_stmpe2>;
status = "okay";
pmic: pfuze100@08 {
};
};
- stmpe: stmpe1601@40 {
+ stmpe1: stmpe1601@40 {
compatible = "st,stmpe1601";
reg = <0x40>;
interrupts = <30 0>;
interrupt-parent = <&gpio3>;
- stmpe_gpio: stmpe_gpio {
+ stmpe_gpio1: stmpe_gpio {
+ #gpio-cells = <2>;
+ compatible = "st,stmpe-gpio";
+ };
+ };
+
+ stmpe2: stmpe1601@44 {
+ compatible = "st,stmpe1601";
+ reg = <0x44>;
+ interrupts = <2 0>;
+ interrupt-parent = <&gpio5>;
+
+ stmpe_gpio2: stmpe_gpio {
#gpio-cells = <2>;
compatible = "st,stmpe-gpio";
};
>;
};
- pinctrl_stmpe: stmpegrp {
+ pinctrl_stmpe1: stmpe1grp {
fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
};
+ pinctrl_stmpe2: stmpe2grp {
+ fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
pinctrl_usbotg: usbotggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
&usbh1 {
vbus-supply = <®_usb_host1>;
disable-over-current;
+ dr_mode = "host";
status = "okay";
};
&usbotg {
- vbus-supply = <®_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
&ldb {
status = "okay";
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
- };
};
&pcie {
&ldb {
status = "okay";
- lvds-channel@0 {
- crtcs = <&ipu1 0>, <&ipu1 1>;
- };
};
&pcie {
/* GPIO16 -> AR8035 25MHz */
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
/* AR8035 pin strapping: IO voltage: pull up */
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
/* AR8035 pin strapping: PHYADDR#0: pull down */
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
/* AR8035 pin strapping: PHYADDR#1: pull down */
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
/* AR8035 pin strapping: MODE#1: pull up */
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
/* AR8035 pin strapping: MODE#3: pull up */
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
/* AR8035 pin strapping: MODE#0: pull down */
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
/*
* As the RMII pins are also connected to RGMII
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
#include "skeleton.dtsi"
/ {
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
status = "disabled";
MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
+ MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000
>;
};
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
ckil {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
osc {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
m25p16@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "m25p16";
+ compatible = "st,m25p16";
reg = <0>;
spi-max-frequency = <40000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l4005a";
+ compatible = "mxicy,mx25l4005a";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
m25p40@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l1606e";
+ compatible = "mxicy,mx25l1606e";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
status = "okay";
eeprom@50 {
- compatible = "at,24c04";
+ compatible = "atmel,24c04";
pagesize = <16>;
reg = <0x50>;
};
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l12805d";
+ compatible = "mxicy,mx25l12805d";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l4005a";
+ compatible = "mxicy,mx25l4005a";
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
status = "okay";
eeprom@50 {
- compatible = "at,24c04";
+ compatible = "atmel,24c04";
pagesize = <16>;
reg = <0x50>;
};
status = "okay";
adt7476: adt7476a@2e {
- compatible = "adt7476";
+ compatible = "adi,adt7476";
reg = <0x2e>;
};
};
status = "okay";
lm85: lm85@2e {
- compatible = "lm85";
+ compatible = "national,lm85";
reg = <0x2e>;
};
};
pinctrl-names = "default";
s35390a: s35390a@30 {
- compatible = "s35390a";
+ compatible = "sii,s35390a";
reg = <0x30>;
};
};
pinctrl-names = "default";
s24c02: s24c02@50 {
- compatible = "24c02";
+ compatible = "atmel,24c02";
reg = <0x50>;
};
};
};
sdhi0_pins: sd0 {
- renesas,gpios = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
renesas,function = "sdhi0";
};
sdhi2_pins: sd2 {
- renesas,gpios = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
renesas,function = "sdhi2";
};
uart0 {
uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
};
uart1 {
uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
};
uart2 {
uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
};
/* no rts / cts for uart2 */
uart3 {
uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
+ rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
};
clocks {
audio_ext {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24576000>;
};
enet_ext {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <50000000>;
};
};
sxosc {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <32768>;
};
fxosc {
compatible = "fixed-clock";
+ #clock-cells = <0>;
clock-frequency = <24000000>;
};
};
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
interrupt-controller;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
* the "output_enable" bit as a gate, even though it's really just
* enabling clock output.
*/
- clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
- clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
- clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels));
- clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels));
- clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels));
- clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels));
+ clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+ clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+ clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
}
+ clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
+ clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
+ clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
+ clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
* We can not get the 100MHz from the pll2_pfd0_352m.
#include <linux/gpio.h>
#include <linux/mfd/asic3.h>
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
if (!node) {
- pr_err("%s: could not find sram dt node\n", __func__);
+ pr_err("%s: could not find pmu dt node\n", __func__);
return;
}
static int clockevent_next_event(unsigned long evt,
struct clock_event_device *clk_event_dev);
-static void spear_clocksource_init(void)
+static void __init spear_clocksource_init(void)
{
u32 tick_rate;
u16 val;
which controls AHB bus master arbitration and some
performance parameters(priority, prefech size).
-config TEGRA_EMC_SCALING_ENABLE
- bool "Enable scaling the memory frequency"
-
endmenu
projects / firefly-linux-kernel-4.4.55.git / commitdiff