[SCSI] 3w-xxxx: convert to use the data buffer accessors
authorFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Mon, 14 May 2007 11:20:27 +0000 (20:20 +0900)
committerJames Bottomley <jejb@mulgrave.il.steeleye.com>
Thu, 31 May 2007 04:29:32 +0000 (23:29 -0500)
- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/3w-xxxx.c

index 656bdb1352d8d8ee44991ecb8e2ca75f0f5b05a6..c7995fc216e8ed43a572ea9e41f482fc7c6a88c8 100644 (file)
@@ -1273,57 +1273,24 @@ static int tw_map_scsi_sg_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
        int use_sg;
 
        dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data()\n");
-       
-       if (cmd->use_sg == 0)
-               return 0;
 
-       use_sg = pci_map_sg(pdev, cmd->request_buffer, cmd->use_sg, DMA_BIDIRECTIONAL);
-       
-       if (use_sg == 0) {
+       use_sg = scsi_dma_map(cmd);
+       if (use_sg < 0) {
                printk(KERN_WARNING "3w-xxxx: tw_map_scsi_sg_data(): pci_map_sg() failed.\n");
                return 0;
        }
 
        cmd->SCp.phase = TW_PHASE_SGLIST;
        cmd->SCp.have_data_in = use_sg;
-       
+
        return use_sg;
 } /* End tw_map_scsi_sg_data() */
 
-static u32 tw_map_scsi_single_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
-{
-       dma_addr_t mapping;
-
-       dprintk(KERN_WARNING "3w-xxxx: tw_map_scsi_single_data()\n");
-
-       if (cmd->request_bufflen == 0)
-               return 0;
-
-       mapping = pci_map_page(pdev, virt_to_page(cmd->request_buffer), offset_in_page(cmd->request_buffer), cmd->request_bufflen, DMA_BIDIRECTIONAL);
-
-       if (mapping == 0) {
-               printk(KERN_WARNING "3w-xxxx: tw_map_scsi_single_data(): pci_map_page() failed.\n");
-               return 0;
-       }
-
-       cmd->SCp.phase = TW_PHASE_SINGLE;
-       cmd->SCp.have_data_in = mapping;
-
-       return mapping;
-} /* End tw_map_scsi_single_data() */
-
 static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
 {
        dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n");
 
-       switch(cmd->SCp.phase) {
-               case TW_PHASE_SINGLE:
-                       pci_unmap_page(pdev, cmd->SCp.have_data_in, cmd->request_bufflen, DMA_BIDIRECTIONAL);
-                       break;
-               case TW_PHASE_SGLIST:
-                       pci_unmap_sg(pdev, cmd->request_buffer, cmd->use_sg, DMA_BIDIRECTIONAL);
-                       break;
-       }
+       scsi_dma_unmap(cmd);
 } /* End tw_unmap_scsi_data() */
 
 /* This function will reset a device extension */
@@ -1499,27 +1466,16 @@ static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id,
        void *buf;
        unsigned int transfer_len;
        unsigned long flags = 0;
+       struct scatterlist *sg = scsi_sglist(cmd);
 
-       if (cmd->use_sg) {
-               struct scatterlist *sg =
-                       (struct scatterlist *)cmd->request_buffer;
-               local_irq_save(flags);
-               buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
-               transfer_len = min(sg->length, len);
-       } else {
-               buf = cmd->request_buffer;
-               transfer_len = min(cmd->request_bufflen, len);
-       }
+       local_irq_save(flags);
+       buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+       transfer_len = min(sg->length, len);
 
        memcpy(buf, data, transfer_len);
-       
-       if (cmd->use_sg) {
-               struct scatterlist *sg;
 
-               sg = (struct scatterlist *)cmd->request_buffer;
-               kunmap_atomic(buf - sg->offset, KM_IRQ0);
-               local_irq_restore(flags);
-       }
+       kunmap_atomic(buf - sg->offset, KM_IRQ0);
+       local_irq_restore(flags);
 }
 
 /* This function is called by the isr to complete an inquiry command */
@@ -1764,19 +1720,20 @@ static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id)
 {
        TW_Command *command_packet;
        unsigned long command_que_value;
-       u32 lba = 0x0, num_sectors = 0x0, buffaddr = 0x0;
+       u32 lba = 0x0, num_sectors = 0x0;
        int i, use_sg;
        struct scsi_cmnd *srb;
-       struct scatterlist *sglist;
+       struct scatterlist *sglist, *sg;
 
        dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n");
 
-       if (tw_dev->srb[request_id]->request_buffer == NULL) {
+       srb = tw_dev->srb[request_id];
+
+       sglist = scsi_sglist(srb);
+       if (!sglist) {
                printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n");
                return 1;
        }
-       sglist = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
-       srb = tw_dev->srb[request_id];
 
        /* Initialize command packet */
        command_packet = (TW_Command *)tw_dev->command_packet_virtual_address[request_id];
@@ -1819,33 +1776,18 @@ static int tw_scsiop_read_write(TW_Device_Extension *tw_dev, int request_id)
        command_packet->byte8.io.lba = lba;
        command_packet->byte6.block_count = num_sectors;
 
-       /* Do this if there are no sg list entries */
-       if (tw_dev->srb[request_id]->use_sg == 0) {    
-               dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): SG = 0\n");
-               buffaddr = tw_map_scsi_single_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
-               if (buffaddr == 0)
-                       return 1;
+       use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
+       if (!use_sg)
+               return 1;
 
-               command_packet->byte8.io.sgl[0].address = buffaddr;
-               command_packet->byte8.io.sgl[0].length = tw_dev->srb[request_id]->request_bufflen;
+       scsi_for_each_sg(tw_dev->srb[request_id], sg, use_sg, i) {
+               command_packet->byte8.io.sgl[i].address = sg_dma_address(sg);
+               command_packet->byte8.io.sgl[i].length = sg_dma_len(sg);
                command_packet->size+=2;
        }
 
-       /* Do this if we have multiple sg list entries */
-       if (tw_dev->srb[request_id]->use_sg > 0) {
-               use_sg = tw_map_scsi_sg_data(tw_dev->tw_pci_dev, tw_dev->srb[request_id]);
-               if (use_sg == 0)
-                       return 1;
-
-               for (i=0;i<use_sg; i++) {
-                       command_packet->byte8.io.sgl[i].address = sg_dma_address(&sglist[i]);
-                       command_packet->byte8.io.sgl[i].length = sg_dma_len(&sglist[i]);
-                       command_packet->size+=2;
-               }
-       }
-
        /* Update SG statistics */
-       tw_dev->sgl_entries = tw_dev->srb[request_id]->use_sg;
+       tw_dev->sgl_entries = scsi_sg_count(tw_dev->srb[request_id]);
        if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
                tw_dev->max_sgl_entries = tw_dev->sgl_entries;