drm/i915: gen specific ring init
authorBen Widawsky <benjamin.widawsky@intel.com>
Mon, 30 Jun 2014 16:53:36 +0000 (09:53 -0700)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Mon, 7 Jul 2014 20:08:29 +0000 (22:08 +0200)
Gen8 has already had some differentiation with how it handles rings.
Semaphores bring yet more differences, and now is as good a time as any
to do the split.

Also, since gen8 doesn't actually use semaphores up until this point,
put the proper "NULL" values in for the mbox info.

v2: v1 had a stale commit message

v3: Move everything in the is_semaphore_enabled() check

v4: VCS2 rebase
Remove double assignment of signal in render ring (Ville)

v5: Adding missed VCS2 signal init on gen8+ (Rodrigo)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_ringbuffer.c

index 22c2b9a217b87c15485ef4e40ac2b15f1b3aba6e..7ca1b946d8de1463d8c8d3fb20b5a6876e401bad 100644 (file)
@@ -729,7 +729,11 @@ gen6_add_request(struct intel_engine_cs *ring)
 {
        int ret;
 
-       ret = ring->semaphore.signal(ring, 4);
+       if (ring->semaphore.signal)
+               ret = ring->semaphore.signal(ring, 4);
+       else
+               ret = intel_ring_begin(ring, 4);
+
        if (ret)
                return ret;
 
@@ -1952,40 +1956,59 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
        ring->id = RCS;
        ring->mmio_base = RENDER_RING_BASE;
 
-       if (INTEL_INFO(dev)->gen >= 6) {
+       if (INTEL_INFO(dev)->gen >= 8) {
+               ring->add_request = gen6_add_request;
+               ring->flush = gen8_render_ring_flush;
+               ring->irq_get = gen8_ring_get_irq;
+               ring->irq_put = gen8_ring_put_irq;
+               ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
+               ring->get_seqno = gen6_ring_get_seqno;
+               ring->set_seqno = ring_set_seqno;
+               if (i915_semaphore_is_enabled(dev)) {
+                       ring->semaphore.sync_to = gen6_ring_sync;
+                       ring->semaphore.signal = gen6_signal;
+                       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+               }
+       } else if (INTEL_INFO(dev)->gen >= 6) {
                ring->add_request = gen6_add_request;
                ring->flush = gen7_render_ring_flush;
                if (INTEL_INFO(dev)->gen == 6)
                        ring->flush = gen6_render_ring_flush;
-               if (INTEL_INFO(dev)->gen >= 8) {
-                       ring->flush = gen8_render_ring_flush;
-                       ring->irq_get = gen8_ring_get_irq;
-                       ring->irq_put = gen8_ring_put_irq;
-               } else {
-                       ring->irq_get = gen6_ring_get_irq;
-                       ring->irq_put = gen6_ring_put_irq;
-               }
+               ring->irq_get = gen6_ring_get_irq;
+               ring->irq_put = gen6_ring_put_irq;
                ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
                ring->get_seqno = gen6_ring_get_seqno;
                ring->set_seqno = ring_set_seqno;
-               ring->semaphore.sync_to = gen6_ring_sync;
-               ring->semaphore.signal = gen6_signal;
-               /*
-                * The current semaphore is only applied on pre-gen8 platform.
-                * And there is no VCS2 ring on the pre-gen8 platform. So the
-                * semaphore between RCS and VCS2 is initialized as INVALID.
-                * Gen8 will initialize the sema between VCS2 and RCS later.
-                */
-               ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
-               ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_RV;
-               ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_RB;
-               ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_RVE;
-               ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
-               ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
-               ring->semaphore.mbox.signal[VCS] = GEN6_VRSYNC;
-               ring->semaphore.mbox.signal[BCS] = GEN6_BRSYNC;
-               ring->semaphore.mbox.signal[VECS] = GEN6_VERSYNC;
-               ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+               if (i915_semaphore_is_enabled(dev)) {
+                       ring->semaphore.sync_to = gen6_ring_sync;
+                       ring->semaphore.signal = gen6_signal;
+                       /*
+                        * The current semaphore is only applied on pre-gen8
+                        * platform.  And there is no VCS2 ring on the pre-gen8
+                        * platform. So the semaphore between RCS and VCS2 is
+                        * initialized as INVALID.  Gen8 will initialize the
+                        * sema between VCS2 and RCS later.
+                        */
+                       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_RV;
+                       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_RB;
+                       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_RVE;
+                       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS] = GEN6_VRSYNC;
+                       ring->semaphore.mbox.signal[BCS] = GEN6_BRSYNC;
+                       ring->semaphore.mbox.signal[VECS] = GEN6_VERSYNC;
+                       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+               }
        } else if (IS_GEN5(dev)) {
                ring->add_request = pc_render_add_request;
                ring->flush = gen4_render_ring_flush;
@@ -2013,6 +2036,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
                ring->irq_enable_mask = I915_USER_INTERRUPT;
        }
        ring->write_tail = ring_write_tail;
+
        if (IS_HASWELL(dev))
                ring->dispatch_execbuffer = hsw_ring_dispatch_execbuffer;
        else if (IS_GEN8(dev))
@@ -2163,31 +2187,49 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
                        ring->irq_put = gen8_ring_put_irq;
                        ring->dispatch_execbuffer =
                                gen8_ring_dispatch_execbuffer;
+                       if (i915_semaphore_is_enabled(dev)) {
+                               ring->semaphore.sync_to = gen6_ring_sync;
+                               ring->semaphore.signal = gen6_signal;
+                               /*
+                                * The current semaphore is only applied on
+                                * pre-gen8 platform.  And there is no VCS2 ring
+                                * on the pre-gen8 platform. So the semaphore
+                                * between VCS and VCS2 is initialized as
+                                * INVALID.  Gen8 will initialize the sema
+                                * between VCS2 and VCS later.
+                                */
+                               ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+                               ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+                               ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+                               ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+                               ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                               ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
+                               ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
+                               ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
+                               ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
+                               ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+                       }
                } else {
                        ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
                        ring->irq_get = gen6_ring_get_irq;
                        ring->irq_put = gen6_ring_put_irq;
                        ring->dispatch_execbuffer =
                                gen6_ring_dispatch_execbuffer;
+                       if (i915_semaphore_is_enabled(dev)) {
+                               ring->semaphore.sync_to = gen6_ring_sync;
+                               ring->semaphore.signal = gen6_signal;
+                               ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VR;
+                               ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+                               ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VB;
+                               ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_VVE;
+                               ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                               ring->semaphore.mbox.signal[RCS] = GEN6_RVSYNC;
+                               ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
+                               ring->semaphore.mbox.signal[BCS] = GEN6_BVSYNC;
+                               ring->semaphore.mbox.signal[VECS] = GEN6_VEVSYNC;
+                               ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+                       }
                }
-               ring->semaphore.sync_to = gen6_ring_sync;
-               ring->semaphore.signal = gen6_signal;
-               /*
-                * The current semaphore is only applied on pre-gen8 platform.
-                * And there is no VCS2 ring on the pre-gen8 platform. So the
-                * semaphore between VCS and VCS2 is initialized as INVALID.
-                * Gen8 will initialize the sema between VCS2 and VCS later.
-                */
-               ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VR;
-               ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
-               ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VB;
-               ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_VVE;
-               ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
-               ring->semaphore.mbox.signal[RCS] = GEN6_RVSYNC;
-               ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
-               ring->semaphore.mbox.signal[BCS] = GEN6_BVSYNC;
-               ring->semaphore.mbox.signal[VECS] = GEN6_VEVSYNC;
-               ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
        } else {
                ring->mmio_base = BSD_RING_BASE;
                ring->flush = bsd_ring_flush;
@@ -2283,30 +2325,47 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
                ring->irq_get = gen8_ring_get_irq;
                ring->irq_put = gen8_ring_put_irq;
                ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
+               if (i915_semaphore_is_enabled(dev)) {
+                       ring->semaphore.sync_to = gen6_ring_sync;
+                       ring->semaphore.signal = gen6_signal;
+                       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+               }
        } else {
                ring->irq_enable_mask = GT_BLT_USER_INTERRUPT;
                ring->irq_get = gen6_ring_get_irq;
                ring->irq_put = gen6_ring_put_irq;
                ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
+               if (i915_semaphore_is_enabled(dev)) {
+                       ring->semaphore.signal = gen6_signal;
+                       ring->semaphore.sync_to = gen6_ring_sync;
+                       /*
+                        * The current semaphore is only applied on pre-gen8
+                        * platform.  And there is no VCS2 ring on the pre-gen8
+                        * platform. So the semaphore between BCS and VCS2 is
+                        * initialized as INVALID.  Gen8 will initialize the
+                        * sema between BCS and VCS2 later.
+                        */
+                       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_BR;
+                       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_BV;
+                       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_BVE;
+                       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.signal[RCS] = GEN6_RBSYNC;
+                       ring->semaphore.mbox.signal[VCS] = GEN6_VBSYNC;
+                       ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VECS] = GEN6_VEBSYNC;
+                       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+               }
        }
-       ring->semaphore.sync_to = gen6_ring_sync;
-       ring->semaphore.signal = gen6_signal;
-       /*
-        * The current semaphore is only applied on pre-gen8 platform. And
-        * there is no VCS2 ring on the pre-gen8 platform. So the semaphore
-        * between BCS and VCS2 is initialized as INVALID.
-        * Gen8 will initialize the sema between BCS and VCS2 later.
-        */
-       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_BR;
-       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_BV;
-       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
-       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_BVE;
-       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
-       ring->semaphore.mbox.signal[RCS] = GEN6_RBSYNC;
-       ring->semaphore.mbox.signal[VCS] = GEN6_VBSYNC;
-       ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
-       ring->semaphore.mbox.signal[VECS] = GEN6_VEBSYNC;
-       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
        ring->init = init_ring_common;
 
        return intel_init_ring_buffer(dev, ring);
@@ -2333,24 +2392,40 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
                ring->irq_get = gen8_ring_get_irq;
                ring->irq_put = gen8_ring_put_irq;
                ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
+               if (i915_semaphore_is_enabled(dev)) {
+                       ring->semaphore.sync_to = gen6_ring_sync;
+                       ring->semaphore.signal = gen6_signal;
+                       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+               }
        } else {
                ring->irq_enable_mask = PM_VEBOX_USER_INTERRUPT;
                ring->irq_get = hsw_vebox_get_irq;
                ring->irq_put = hsw_vebox_put_irq;
                ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
+               if (i915_semaphore_is_enabled(dev)) {
+                       ring->semaphore.sync_to = gen6_ring_sync;
+                       ring->semaphore.signal = gen6_signal;
+                       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VER;
+                       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_VEV;
+                       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VEB;
+                       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
+                       ring->semaphore.mbox.signal[RCS] = GEN6_RVESYNC;
+                       ring->semaphore.mbox.signal[VCS] = GEN6_VVESYNC;
+                       ring->semaphore.mbox.signal[BCS] = GEN6_BVESYNC;
+                       ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
+                       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
+               }
        }
-       ring->semaphore.sync_to = gen6_ring_sync;
-       ring->semaphore.signal = gen6_signal;
-       ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VER;
-       ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_VEV;
-       ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VEB;
-       ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
-       ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
-       ring->semaphore.mbox.signal[RCS] = GEN6_RVESYNC;
-       ring->semaphore.mbox.signal[VCS] = GEN6_VVESYNC;
-       ring->semaphore.mbox.signal[BCS] = GEN6_BVESYNC;
-       ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
-       ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
        ring->init = init_ring_common;
 
        return intel_init_ring_buffer(dev, ring);