Input: generic driver for rotary encoders on GPIOs
authorDaniel Mack <daniel@caiaq.de>
Thu, 5 Mar 2009 07:27:14 +0000 (23:27 -0800)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Sun, 8 Mar 2009 23:35:53 +0000 (16:35 -0700)
This patch adds a generic driver for rotary encoders connected to GPIO
pins of a system. It relies on gpiolib and generic hardware irqs. The
documentation that also comes with this patch explains the concept and
how to use the driver.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Documentation/input/rotary-encoder.txt [new file with mode: 0644]
drivers/input/misc/Kconfig
drivers/input/misc/Makefile
drivers/input/misc/rotary_encoder.c [new file with mode: 0644]
include/linux/rotary_encoder.h [new file with mode: 0644]

diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
new file mode 100644 (file)
index 0000000..435102a
--- /dev/null
@@ -0,0 +1,101 @@
+rotary-encoder - a generic driver for GPIO connected devices
+Daniel Mack <daniel@caiaq.de>, Feb 2009
+
+0. Function
+-----------
+
+Rotary encoders are devices which are connected to the CPU or other
+peripherals with two wires. The outputs are phase-shifted by 90 degrees
+and by triggering on falling and rising edges, the turn direction can
+be determined.
+
+The phase diagram of these two outputs look like this:
+
+                  _____       _____       _____
+                 |     |     |     |     |     |
+  Channel A  ____|     |_____|     |_____|     |____
+
+                 :  :  :  :  :  :  :  :  :  :  :  :
+            __       _____       _____       _____
+              |     |     |     |     |     |     |
+  Channel B   |_____|     |_____|     |_____|     |__
+
+                 :  :  :  :  :  :  :  :  :  :  :  :
+  Event          a  b  c  d  a  b  c  d  a  b  c  d
+
+                |<-------->|
+                 one step
+
+
+For more information, please see
+       http://en.wikipedia.org/wiki/Rotary_encoder
+
+
+1. Events / state machine
+-------------------------
+
+a) Rising edge on channel A, channel B in low state
+       This state is used to recognize a clockwise turn
+
+b) Rising edge on channel B, channel A in high state
+       When entering this state, the encoder is put into 'armed' state,
+       meaning that there it has seen half the way of a one-step transition.
+
+c) Falling edge on channel A, channel B in high state
+       This state is used to recognize a counter-clockwise turn
+
+d) Falling edge on channel B, channel A in low state
+       Parking position. If the encoder enters this state, a full transition
+       should have happend, unless it flipped back on half the way. The
+       'armed' state tells us about that.
+
+2. Platform requirements
+------------------------
+
+As there is no hardware dependent call in this driver, the platform it is
+used with must support gpiolib. Another requirement is that IRQs must be
+able to fire on both edges.
+
+
+3. Board integration
+--------------------
+
+To use this driver in your system, register a platform_device with the
+name 'rotary-encoder' and associate the IRQs and some specific platform
+data with it.
+
+struct rotary_encoder_platform_data is declared in
+include/linux/rotary-encoder.h and needs to be filled with the number of
+steps the encoder has and can carry information about externally inverted
+signals (because of used invertig buffer or other reasons).
+
+Because GPIO to IRQ mapping is platform specific, this information must
+be given in seperately to the driver. See the example below.
+
+---------<snip>---------
+
+/* board support file example */
+
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+
+#define GPIO_ROTARY_A 1
+#define GPIO_ROTARY_B 2
+
+static struct rotary_encoder_platform_data my_rotary_encoder_info = {
+       .steps          = 24,
+       .axis           = ABS_X,
+       .gpio_a         = GPIO_ROTARY_A,
+       .gpio_b         = GPIO_ROTARY_B,
+       .inverted_a     = 0,
+       .inverted_b     = 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+       .name           = "rotary-encoder",
+       .id             = 0,
+       .dev            = {
+               .platform_data = &my_rotary_encoder_info,
+       }
+};
+
index 67e5553f699a1053224b233e1f2fb85b778471ec..806d2e66d249ec6444f81a6befd9460047dbc8fc 100644 (file)
@@ -227,4 +227,15 @@ config INPUT_PCF50633_PMU
         Say Y to include support for delivering  PMU events via  input
         layer on NXP PCF50633.
 
+config INPUT_GPIO_ROTARY_ENCODER
+       tristate "Rotary encoders connected to GPIO pins"
+       depends on GPIOLIB && GENERIC_GPIO
+       help
+         Say Y here to add support for rotary encoders connected to GPIO lines.
+         Check file:Documentation/incput/rotary_encoder.txt for more
+         information.
+
+         To compile this driver as a module, choose M here: the
+         module will be called rotary_encoder.
+
 endif
index bb62e6efacf3476d78c66fd0c9a575c465f2a99a..e86cee66c9142b1d8ebf751e930cdcf4f6f5b6d1 100644 (file)
@@ -22,3 +22,5 @@ obj-$(CONFIG_INPUT_UINPUT)            += uinput.o
 obj-$(CONFIG_INPUT_APANEL)             += apanel.o
 obj-$(CONFIG_INPUT_SGI_BTNS)           += sgi_btns.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)       += pcf50633-input.o
+obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)        += rotary_encoder.o
+
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
new file mode 100644 (file)
index 0000000..5bb3ab5
--- /dev/null
@@ -0,0 +1,221 @@
+/*
+ * rotary_encoder.c
+ *
+ * (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * state machine code inspired by code from Tim Ruetz
+ *
+ * A generic driver for rotary encoders connected to GPIO lines.
+ * See file:Documentation/input/rotary_encoder.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/rotary_encoder.h>
+
+#define DRV_NAME "rotary-encoder"
+
+struct rotary_encoder {
+       unsigned int irq_a;
+       unsigned int irq_b;
+       unsigned int pos;
+       unsigned int armed;
+       unsigned int dir;
+       struct input_dev *input;
+       struct rotary_encoder_platform_data *pdata;
+};
+
+static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
+{
+       struct rotary_encoder *encoder = dev_id;
+       struct rotary_encoder_platform_data *pdata = encoder->pdata;
+       int a = !!gpio_get_value(pdata->gpio_a);
+       int b = !!gpio_get_value(pdata->gpio_b);
+       int state;
+
+       a ^= pdata->inverted_a;
+       b ^= pdata->inverted_b;
+       state = (a << 1) | b;
+
+       switch (state) {
+
+       case 0x0:
+               if (!encoder->armed)
+                       break;
+
+               if (encoder->dir) {
+                       /* turning counter-clockwise */
+                       encoder->pos += pdata->steps;
+                       encoder->pos--;
+                       encoder->pos %= pdata->steps;
+               } else {
+                       /* turning clockwise */
+                       encoder->pos++;
+                       encoder->pos %= pdata->steps;
+               }
+
+               input_report_abs(encoder->input, pdata->axis, encoder->pos);
+               input_sync(encoder->input);
+
+               encoder->armed = 0;
+               break;
+
+       case 0x1:
+       case 0x2:
+               if (encoder->armed)
+                       encoder->dir = state - 1;
+               break;
+
+       case 0x3:
+               encoder->armed = 1;
+               break;
+       }
+
+       return IRQ_HANDLED;
+}
+
+static int __devinit rotary_encoder_probe(struct platform_device *pdev)
+{
+       struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data;
+       struct rotary_encoder *encoder;
+       struct input_dev *input;
+       int err;
+
+       if (!pdata || !pdata->steps) {
+               dev_err(&pdev->dev, "invalid platform data\n");
+               return -ENOENT;
+       }
+
+       encoder = kzalloc(sizeof(struct rotary_encoder), GFP_KERNEL);
+       input = input_allocate_device();
+       if (!encoder || !input) {
+               dev_err(&pdev->dev, "failed to allocate memory for device\n");
+               err = -ENOMEM;
+               goto exit_free_mem;
+       }
+
+       encoder->input = input;
+       encoder->pdata = pdata;
+       encoder->irq_a = gpio_to_irq(pdata->gpio_a);
+       encoder->irq_b = gpio_to_irq(pdata->gpio_b);
+
+       /* create and register the input driver */
+       input->name = pdev->name;
+       input->id.bustype = BUS_HOST;
+       input->dev.parent = &pdev->dev;
+       input->evbit[0] = BIT_MASK(EV_ABS);
+       input_set_abs_params(encoder->input,
+                            pdata->axis, 0, pdata->steps, 0, 1);
+
+       err = input_register_device(input);
+       if (err) {
+               dev_err(&pdev->dev, "failed to register input device\n");
+               goto exit_free_mem;
+       }
+
+       /* request the GPIOs */
+       err = gpio_request(pdata->gpio_a, DRV_NAME);
+       if (err) {
+               dev_err(&pdev->dev, "unable to request GPIO %d\n",
+                       pdata->gpio_a);
+               goto exit_unregister_input;
+       }
+
+       err = gpio_request(pdata->gpio_b, DRV_NAME);
+       if (err) {
+               dev_err(&pdev->dev, "unable to request GPIO %d\n",
+                       pdata->gpio_b);
+               goto exit_free_gpio_a;
+       }
+
+       /* request the IRQs */
+       err = request_irq(encoder->irq_a, &rotary_encoder_irq,
+                         IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+                         DRV_NAME, encoder);
+       if (err) {
+               dev_err(&pdev->dev, "unable to request IRQ %d\n",
+                       encoder->irq_a);
+               goto exit_free_gpio_b;
+       }
+
+       err = request_irq(encoder->irq_b, &rotary_encoder_irq,
+                         IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+                         DRV_NAME, encoder);
+       if (err) {
+               dev_err(&pdev->dev, "unable to request IRQ %d\n",
+                       encoder->irq_b);
+               goto exit_free_irq_a;
+       }
+
+       platform_set_drvdata(pdev, encoder);
+
+       return 0;
+
+exit_free_irq_a:
+       free_irq(encoder->irq_a, encoder);
+exit_free_gpio_b:
+       gpio_free(pdata->gpio_b);
+exit_free_gpio_a:
+       gpio_free(pdata->gpio_a);
+exit_unregister_input:
+       input_unregister_device(input);
+       input = NULL; /* so we don't try to free it */
+exit_free_mem:
+       input_free_device(input);
+       kfree(encoder);
+       return err;
+}
+
+static int __devexit rotary_encoder_remove(struct platform_device *pdev)
+{
+       struct rotary_encoder *encoder = platform_get_drvdata(pdev);
+       struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data;
+
+       free_irq(encoder->irq_a, encoder);
+       free_irq(encoder->irq_b, encoder);
+       gpio_free(pdata->gpio_a);
+       gpio_free(pdata->gpio_b);
+       input_unregister_device(encoder->input);
+       platform_set_drvdata(pdev, NULL);
+       kfree(encoder);
+
+       return 0;
+}
+
+static struct platform_driver rotary_encoder_driver = {
+       .probe          = rotary_encoder_probe,
+       .remove         = __devexit_p(rotary_encoder_remove),
+       .driver         = {
+               .name   = DRV_NAME,
+               .owner  = THIS_MODULE,
+       }
+};
+
+static int __init rotary_encoder_init(void)
+{
+       return platform_driver_register(&rotary_encoder_driver);
+}
+
+static void __exit rotary_encoder_exit(void)
+{
+       platform_driver_unregister(&rotary_encoder_driver);
+}
+
+module_init(rotary_encoder_init);
+module_exit(rotary_encoder_exit);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("GPIO rotary encoder driver");
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_LICENSE("GPL v2");
+
diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h
new file mode 100644 (file)
index 0000000..12d63a3
--- /dev/null
@@ -0,0 +1,13 @@
+#ifndef __ROTARY_ENCODER_H__
+#define __ROTARY_ENCODER_H__
+
+struct rotary_encoder_platform_data {
+       unsigned int steps;
+       unsigned int axis;
+       unsigned int gpio_a;
+       unsigned int gpio_b;
+       unsigned int inverted_a;
+       unsigned int inverted_b;
+};
+
+#endif /* __ROTARY_ENCODER_H__ */