Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
authorLinus Torvalds <torvalds@linux-foundation.org>
Fri, 2 Nov 2012 23:11:15 +0000 (16:11 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 2 Nov 2012 23:11:15 +0000 (16:11 -0700)
Pull input subsystem fixes from Dmitry Torokhov:
 "Just a few driver fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc40 - remove wrong announcement of pressure support
  Input: lpc32xx-keys - select INPUT_MATRIXKMAP
  Input: pxa27x_keypad - clear pending interrupts on keypad config
  Input: wacom - correct bad Cintiq 24HD check
  Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD
  Input: egalax_ts - get gpio from devicetree

Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt [new file with mode: 0644]
drivers/input/keyboard/Kconfig
drivers/input/keyboard/pxa27x_keypad.c
drivers/input/tablet/wacom_sys.c
drivers/input/tablet/wacom_wac.c
drivers/input/touchscreen/Kconfig
drivers/input/touchscreen/egalax_ts.c
drivers/input/touchscreen/tsc40.c

diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644 (file)
index 0000000..df70318
--- /dev/null
@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+       egalax_ts@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <9 2>;
+               wakeup-gpios = <&gpio1 9 0>;
+       };
index b4b65af8612a3f03a79ea19422873cd777f39b76..de0874054e9faebde97690fdb23986d268cbf95d 100644 (file)
@@ -335,6 +335,7 @@ config KEYBOARD_LOCOMO
 config KEYBOARD_LPC32XX
        tristate "LPC32XX matrix key scanner support"
        depends on ARCH_LPC32XX && OF
+       select INPUT_MATRIXKMAP
        help
          Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
          connected to a key matrix.
index 803ff6fe021ec001393a5a9844dd825cbcb6235d..cad9d5dd597330b2eaa523b046f33edddb3641bb 100644 (file)
@@ -368,6 +368,9 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
        unsigned int mask = 0, direct_key_num = 0;
        unsigned long kpc = 0;
 
+       /* clear pending interrupt bit */
+       keypad_readl(KPC);
+
        /* enable matrix keys with automatic scan */
        if (pdata->matrix_key_rows && pdata->matrix_key_cols) {
                kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL;
index 2c1e12bf2ab424e87f49ed14e57e9b9125aa9831..858ad446de91b338553d6577bb6d1ac886c1fbb5 100644 (file)
@@ -391,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf,
                                                        features->pktlen = WACOM_PKGLEN_TPC2FG;
                                                }
 
-                                               if (features->type == MTSCREEN || WACOM_24HDT)
+                                               if (features->type == MTSCREEN || features->type == WACOM_24HDT)
                                                        features->pktlen = WACOM_PKGLEN_MTOUCH;
 
                                                if (features->type == BAMBOO_PT) {
index aa6010131179588bb75ea3326843df499db7aaf1..0a67031ffc131a2559d6573d5c3cf65173edd9c6 100644 (file)
@@ -1518,6 +1518,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
                input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
                input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+
+               __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
                wacom_setup_cintiq(wacom_wac);
                break;
 
index 1ba232cbc09d4e8744e1a827c3939ad7292e85a6..f7668b24c378aeed3b4ca4fc1c09d025255eccc1 100644 (file)
@@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI
 
 config TOUCHSCREEN_EGALAX
        tristate "EETI eGalax multi-touch panel support"
-       depends on I2C
+       depends on I2C && OF
        help
          Say Y here to enable support for I2C connected EETI
          eGalax multi-touch panels.
index c1e3460f1195aed3953c0e09542c9718d8664421..13fa62fdfb0b4160f76484bd2aadc92151597ab8 100644 (file)
@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/bitops.h>
 #include <linux/input/mt.h>
+#include <linux/of_gpio.h>
 
 /*
  * Mouse Mode: some panel may configure the controller to mouse mode,
@@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
 /* wake up controller by an falling edge of interrupt gpio.  */
 static int egalax_wake_up_device(struct i2c_client *client)
 {
-       int gpio = irq_to_gpio(client->irq);
+       struct device_node *np = client->dev.of_node;
+       int gpio;
        int ret;
 
+       if (!np)
+               return -ENODEV;
+
+       gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
+       if (!gpio_is_valid(gpio))
+               return -ENODEV;
+
        ret = gpio_request(gpio, "egalax_irq");
        if (ret < 0) {
                dev_err(&client->dev,
@@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client,
        ts->input_dev = input_dev;
 
        /* controller may be in sleep, wake it up. */
-       egalax_wake_up_device(client);
+       error = egalax_wake_up_device(client);
+       if (error) {
+               dev_err(&client->dev, "Failed to wake up the controller\n");
+               goto err_free_dev;
+       }
 
        ret = egalax_firmware_version(client);
        if (ret < 0) {
@@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
 
+static struct of_device_id egalax_ts_dt_ids[] = {
+       { .compatible = "eeti,egalax_ts" },
+       { /* sentinel */ }
+};
+
 static struct i2c_driver egalax_ts_driver = {
        .driver = {
                .name   = "egalax_ts",
                .owner  = THIS_MODULE,
                .pm     = &egalax_ts_pm_ops,
+               .of_match_table = of_match_ptr(egalax_ts_dt_ids),
        },
        .id_table       = egalax_ts_id,
        .probe          = egalax_ts_probe,
index 63209aaa55f01f1baf65a8a1632c8c2ce4056870..eb96f168fb9d53c68032c172faec9d2652dcfa70 100644 (file)
@@ -107,7 +107,6 @@ static int tsc_connect(struct serio *serio, struct serio_driver *drv)
        __set_bit(BTN_TOUCH, input_dev->keybit);
        input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0);
        input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0);
-       input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0);
 
        serio_set_drvdata(serio, ptsc);