can: Kconfig: convert 'depends on CAN' into 'if CAN...endif' block

This patch adds an 'if CAN...endif' Block around all CAN symbols in
net/can/Kconfig. So the 'depends on CAN' dependencies can be removed.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index b56bd9e80957f0dc5f8dde896cb648e7cf939ab5..8088d8fa5611349bd72a8ed48528c3f658d14b8a 100644 (file)
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -1,9 +1,7 @@
 menu "CAN Device Drivers"
-       depends on CAN
 
 config CAN_VCAN
        tristate "Virtual Local CAN Interface (vcan)"
-       depends on CAN
        ---help---
          Similar to the network loopback devices, vcan offers a
          virtual local CAN interface.
@@ -13,7 +11,6 @@ config CAN_VCAN
 
 config CAN_SLCAN
        tristate "Serial / USB serial CAN Adaptors (slcan)"
-       depends on CAN
        ---help---
          CAN driver for several 'low cost' CAN interfaces that are attached
          via serial lines or via USB-to-serial adapters using the LAWICEL
@@ -33,7 +30,6 @@ config CAN_SLCAN
 
 config CAN_DEV
        tristate "Platform CAN drivers with Netlink support"
-       depends on CAN
        default y
        ---help---
          Enables the common framework for platform CAN drivers with Netlink
@@ -133,7 +129,6 @@ source "drivers/net/can/softing/Kconfig"
 
 config CAN_DEBUG_DEVICES
        bool "CAN devices debugging messages"
-       depends on CAN
        ---help---
          Say Y here if you want the CAN device drivers to produce a bunch of
          debug messages to the system log.  Select this if you are having

diff --git a/net/can/Kconfig b/net/can/Kconfig
index 03200699d274bf5e156db6948ac47fb73664f0e8..0435fc42ab046a0c9a879cb7d0eb995033c760ee 100644 (file)
--- a/net/can/Kconfig
+++ b/net/can/Kconfig
@@ -16,9 +16,10 @@ menuconfig CAN
          If you want CAN support you should say Y here and also to the
          specific driver for your controller(s) below.
 
+if CAN
+
 config CAN_RAW
        tristate "Raw CAN Protocol (raw access with CAN-ID filtering)"
-       depends on CAN
        default N
        ---help---
          The raw CAN protocol option offers access to the CAN bus via
@@ -29,7 +30,6 @@ config CAN_RAW
 
 config CAN_BCM
        tristate "Broadcast Manager CAN Protocol (with content filtering)"
-       depends on CAN
        default N
        ---help---
          The Broadcast Manager offers content filtering, timeout monitoring,
@@ -42,7 +42,6 @@ config CAN_BCM
 
 config CAN_GW
        tristate "CAN Gateway/Router (with netlink configuration)"
-       depends on CAN
        default N
        ---help---
          The CAN Gateway/Router is used to route (and modify) CAN frames.
@@ -53,3 +52,5 @@ config CAN_GW
          by the netlink configuration interface known e.g. from iptables.
 
 source "drivers/net/can/Kconfig"
+
+endif