drm/i915/bxt: mask off the DPLL state checker bits we don't program
authorImre Deak <imre.deak@intel.com>
Thu, 18 Jun 2015 14:25:53 +0000 (17:25 +0300)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Fri, 3 Jul 2015 05:38:58 +0000 (07:38 +0200)
For the purpose of state checking we only care about the DPLL HW flags
that we actually program, so mask off the ones that we don't.

This fixes one set of DPLL state check failures.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_ddi.c

index cef9709fa2baecdf5679d7faadd82bea4bb31a84..15fc66a8da78b673aea1e389b8b4542296db513a 100644 (file)
@@ -2854,19 +2854,38 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
                return false;
 
        hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(port));
+       hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK;
+
        hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(port));
        hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE;
 
        hw_state->pll0 = I915_READ(BXT_PORT_PLL(port, 0));
+       hw_state->pll0 &= PORT_PLL_M2_MASK;
+
        hw_state->pll1 = I915_READ(BXT_PORT_PLL(port, 1));
+       hw_state->pll1 &= PORT_PLL_N_MASK;
+
        hw_state->pll2 = I915_READ(BXT_PORT_PLL(port, 2));
+       hw_state->pll2 &= PORT_PLL_M2_FRAC_MASK;
+
        hw_state->pll3 = I915_READ(BXT_PORT_PLL(port, 3));
+       hw_state->pll3 &= PORT_PLL_M2_FRAC_ENABLE;
+
        hw_state->pll6 = I915_READ(BXT_PORT_PLL(port, 6));
+       hw_state->pll6 &= PORT_PLL_PROP_COEFF_MASK |
+                         PORT_PLL_INT_COEFF_MASK |
+                         PORT_PLL_GAIN_CTL_MASK;
+
        hw_state->pll8 = I915_READ(BXT_PORT_PLL(port, 8));
+       hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK;
+
        hw_state->pll9 = I915_READ(BXT_PORT_PLL(port, 9));
        hw_state->pll9 &= PORT_PLL_LOCK_THRESHOLD_MASK;
 
        hw_state->pll10 = I915_READ(BXT_PORT_PLL(port, 10));
+       hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H |
+                          PORT_PLL_DCO_AMP_MASK;
+
        /*
         * While we write to the group register to program all lanes at once we
         * can read only lane registers. We configure all lanes the same way, so
@@ -2877,6 +2896,7 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
                DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n",
                                 hw_state->pcsdw12,
                                 I915_READ(BXT_PORT_PCS_DW12_LN23(port)));
+       hw_state->pcsdw12 &= LANE_STAGGER_MASK | LANESTAGGER_STRAP_OVRD;
 
        return true;
 }