[MIPS] db1x00: Remove unused mirage_ts.c
authorYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Wed, 26 Jul 2006 14:34:19 +0000 (23:34 +0900)
committerRalf Baechle <ralf@linux-mips.org>
Wed, 27 Sep 2006 12:37:05 +0000 (13:37 +0100)
CONFIG_WM97XX_COMODULE doesn't exist.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/au1000/db1x00/Makefile
arch/mips/au1000/db1x00/mirage_ts.c [deleted file]

index 4c7d763f21134f34f6a38c439208549cd7eb31ce..51d62bd5d900f93ad5408e71a3df031e027ea840 100644 (file)
@@ -6,4 +6,3 @@
 # Makefile for the Alchemy Semiconductor Db1x00 board.
 
 lib-y := init.o board_setup.o irqmap.o
-obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
deleted file mode 100644 (file)
index 0942dcf..0000000
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/mips/au1000/db1x00/mirage_ts.c
- *
- * BRIEF MODULE DESCRIPTION
- *     Glue between Mirage board-specific touchscreen pieces
- *     and generic Wolfson Codec touchscreen support.
- *
- *     Based on pb1100_ts.c used in Hydrogen II.
- *
- * Copyright (c) 2003 Embedded Edge, LLC
- *             dan@embeddededge.com
- *
- *  This program is free software; you can redistribute         it and/or modify it
- *  under  the terms of         the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED          ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,          INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED          TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA, OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN         CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/wait.h>
-
-#include <asm/segment.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/delay.h>
-#include <asm/au1000.h>
-
-/*
- *  Imported interface to Wolfson Codec driver.
- */
-extern void *wm97xx_ts_get_handle(int which);
-extern int wm97xx_ts_ready(void* ts_handle);
-extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans);
-extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg);
-extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val);
-extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure);
-extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z);
-
-int wm97xx_comodule_present = 1;
-
-
-#define TS_NAME "mirage_ts"
-
-#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
-#define DPRINTK(format, arg...) printk("%s: " format "\n", __FUNCTION__ , ## arg)
-
-
-#define PEN_DOWN_IRQ   AU1000_GPIO_7
-
-static struct task_struct *ts_task = 0;
-static DECLARE_COMPLETION(ts_complete);
-static DECLARE_WAIT_QUEUE_HEAD(pendown_wait);
-
-#ifdef CONFIG_WM97XX_FIVEWIRETS
-static int release_pressure = 1;
-#else
-static int release_pressure = 50;
-#endif
-
-typedef struct {
-   long x;
-   long y;
-} DOWN_EVENT;
-
-#define SAMPLE_RATE    50      /* samples per second */
-#define PEN_DEBOUNCE   5       /* samples for settling - fn of SAMPLE_RATE */
-#define PEN_UP_TIMEOUT 10      /* in seconds */
-#define PEN_UP_SETTLE  5       /* samples per second */
-
-static struct {
-       int xscale;
-       int xtrans;
-       int yscale;
-       int ytrans;
-} mirage_ts_cal =
-{
-#if 0
-       .xscale   = 84,
-       .xtrans = -157,
-       .yscale   = 66,
-       .ytrans = -150,
-#else
-       .xscale   = 84,
-       .xtrans = -150,
-       .yscale   = 66,
-       .ytrans = -146,
-#endif
-};
-
-
-static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs)
-{
-//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD));
-       wake_up(&pendown_wait);
-}
-
-static int ts_thread(void *id)
-{
-       static int pen_was_down = 0;
-       static DOWN_EVENT pen_xy;
-       long x, y, z;
-       void *ts;       /* handle */
-       struct task_struct *tsk = current;
-       int timeout = HZ / SAMPLE_RATE;
-
-       ts_task = tsk;
-
-       daemonize();
-       tsk->tty = NULL;
-       tsk->policy = SCHED_FIFO;
-       tsk->rt_priority = 1;
-       strcpy(tsk->comm, "touchscreen");
-
-       /* only want to receive SIGKILL */
-       spin_lock_irq(&tsk->sigmask_lock);
-       siginitsetinv(&tsk->blocked, sigmask(SIGKILL));
-       recalc_sigpending(tsk);
-       spin_unlock_irq(&tsk->sigmask_lock);
-
-       /* get handle for codec */
-       ts = wm97xx_ts_get_handle(0);
-
-       /* proceed only after everybody is ready */
-       wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4);
-
-       /* board-specific calibration */
-       wm97xx_ts_set_cal(ts,
-                       mirage_ts_cal.xscale,
-                       mirage_ts_cal.xtrans,
-                       mirage_ts_cal.yscale,
-                       mirage_ts_cal.ytrans);
-
-       /* route Wolfson pendown interrupts to our GPIO */
-       au_sync();
-       wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008);
-       au_sync();
-       wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008);
-       au_sync();
-       wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008);
-       au_sync();
-
-       for (;;) {
-               interruptible_sleep_on_timeout(&pendown_wait, timeout);
-               disable_irq(PEN_DOWN_IRQ);
-               if (signal_pending(tsk)) {
-                       break;
-               }
-
-               /* read codec */
-               if (!wm97xx_ts_read_data(ts, &x, &y, &z))
-                       z = 0;  /* treat no-data and pen-up the same */
-
-               if (signal_pending(tsk)) {
-                       break;
-               }
-
-               if (z >= release_pressure) {
-                       y = ~y; /* top to bottom */
-                       if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX
-                               /* bounce ? */
-                               x = pen_xy.x;
-                               y = pen_xy.y;
-                               --pen_was_down;
-                       } else if (pen_was_down <= 1) {
-                               pen_xy.x = x;
-                               pen_xy.y = y;
-                               if (pen_was_down)
-                                       wm97xx_ts_send_data(ts, x, y, z);
-                               pen_was_down = PEN_DEBOUNCE;
-                       }
-                       //wm97xx_ts_send_data(ts, x, y, z);
-                       timeout = HZ / SAMPLE_RATE;
-               } else {
-                       if (pen_was_down) {
-                               if (--pen_was_down)
-                                       z = release_pressure;
-                               else //THXXX
-                               wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z);
-                       }
-                       /* The pendown signal takes some time to settle after
-                        * reading the pen pressure so wait a little
-                        * before enabling the pen.
-                        */
-                       if (! pen_was_down) {
-//                             interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE);
-                               timeout = HZ * PEN_UP_TIMEOUT;
-                       }
-               }
-               enable_irq(PEN_DOWN_IRQ);
-       }
-       enable_irq(PEN_DOWN_IRQ);
-       ts_task = NULL;
-       complete(&ts_complete);
-       return 0;
-}
-
-static int __init ts_mirage_init(void)
-{
-       int ret;
-
-       /* pen down signal is connected to GPIO 7 */
-
-       ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL);
-       if (ret) {
-               err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret);
-               return ret;
-       }
-
-       lock_kernel();
-       ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES);
-       if (ret < 0) {
-               unlock_kernel();
-               return ret;
-       }
-       unlock_kernel();
-
-       info("Mirage touchscreen IRQ initialized.");
-
-       return 0;
-}
-
-static void __exit ts_mirage_exit(void)
-{
-       if (ts_task) {
-               send_sig(SIGKILL, ts_task, 1);
-               wait_for_completion(&ts_complete);
-       }
-
-       free_irq(PEN_DOWN_IRQ, NULL);
-}
-
-module_init(ts_mirage_init);
-module_exit(ts_mirage_exit);
-