FB: sa1100: convert printks to dev_xxx()
authorRussell King <rmk+kernel@arm.linux.org.uk>
Sat, 14 Jan 2012 10:22:56 +0000 (10:22 +0000)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Tue, 21 Feb 2012 11:56:18 +0000 (11:56 +0000)
Use the dev_xxx() macros for driver kernel message output, rather than
open coded printk() with KERN_ levels etc.  Remove DPRINTK().

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/video/sa1100fb.c
drivers/video/sa1100fb.h

index a797220fdf5c746d4f8149759923785bcbfbc460..ecd7cd4ce41240b06f8607976de882f168c27e73 100644 (file)
 #include <mach/assabet.h>
 #include <mach/shannon.h>
 
-/*
- * debugging?
- */
-#define DEBUG 0
 /*
  * Complain if VAR is out of range.
  */
@@ -614,7 +610,7 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
        var->xres_virtual = max(var->xres_virtual, var->xres);
        var->yres_virtual = max(var->yres_virtual, var->yres);
 
-       DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+       dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel);
        switch (var->bits_per_pixel) {
        case 4:
                rgbidx = RGB_4;
@@ -638,16 +634,16 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
        var->blue   = fbi->rgb[rgbidx]->blue;
        var->transp = fbi->rgb[rgbidx]->transp;
 
-       DPRINTK("RGBT length = %d:%d:%d:%d\n",
+       dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n",
                var->red.length, var->green.length, var->blue.length,
                var->transp.length);
 
-       DPRINTK("RGBT offset = %d:%d:%d:%d\n",
+       dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n",
                var->red.offset, var->green.offset, var->blue.offset,
                var->transp.offset);
 
 #ifdef CONFIG_CPU_FREQ
-       printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
+       dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
                sa1100fb_display_dma_period(var),
                cpufreq_get(smp_processor_id()));
 #endif
@@ -683,7 +679,7 @@ static int sa1100fb_set_par(struct fb_info *info)
        struct fb_var_screeninfo *var = &info->var;
        unsigned long palette_mem_size;
 
-       DPRINTK("set_par\n");
+       dev_dbg(fbi->dev, "set_par\n");
 
        if (var->bits_per_pixel == 16)
                fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
@@ -704,7 +700,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 
        palette_mem_size = fbi->palette_size * sizeof(u16);
 
-       DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+       dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size);
 
        fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
        fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
@@ -775,7 +771,7 @@ static int sa1100fb_blank(int blank, struct fb_info *info)
        struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
        int i;
 
-       DPRINTK("sa1100fb_blank: blank=%d\n", blank);
+       dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank);
 
        switch (blank) {
        case FB_BLANK_POWERDOWN:
@@ -863,39 +859,39 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
        u_int half_screen_size, yres, pcd;
        u_long flags;
 
-       DPRINTK("Configuring SA1100 LCD\n");
+       dev_dbg(fbi->dev, "Configuring SA1100 LCD\n");
 
-       DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
+       dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n",
                var->xres, var->hsync_len,
                var->left_margin, var->right_margin);
-       DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
+       dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n",
                var->yres, var->vsync_len,
                var->upper_margin, var->lower_margin);
 
 #if DEBUG_VAR
        if (var->xres < 16        || var->xres > 1024)
-               printk(KERN_ERR "%s: invalid xres %d\n",
+               dev_err(fbi->dev, "%s: invalid xres %d\n",
                        fbi->fb.fix.id, var->xres);
        if (var->hsync_len < 1    || var->hsync_len > 64)
-               printk(KERN_ERR "%s: invalid hsync_len %d\n",
+               dev_err(fbi->dev, "%s: invalid hsync_len %d\n",
                        fbi->fb.fix.id, var->hsync_len);
        if (var->left_margin < 1  || var->left_margin > 255)
-               printk(KERN_ERR "%s: invalid left_margin %d\n",
+               dev_err(fbi->dev, "%s: invalid left_margin %d\n",
                        fbi->fb.fix.id, var->left_margin);
        if (var->right_margin < 1 || var->right_margin > 255)
-               printk(KERN_ERR "%s: invalid right_margin %d\n",
+               dev_err(fbi->dev, "%s: invalid right_margin %d\n",
                        fbi->fb.fix.id, var->right_margin);
        if (var->yres < 1         || var->yres > 1024)
-               printk(KERN_ERR "%s: invalid yres %d\n",
+               dev_err(fbi->dev, "%s: invalid yres %d\n",
                        fbi->fb.fix.id, var->yres);
        if (var->vsync_len < 1    || var->vsync_len > 64)
-               printk(KERN_ERR "%s: invalid vsync_len %d\n",
+               dev_err(fbi->dev, "%s: invalid vsync_len %d\n",
                        fbi->fb.fix.id, var->vsync_len);
        if (var->upper_margin < 0 || var->upper_margin > 255)
-               printk(KERN_ERR "%s: invalid upper_margin %d\n",
+               dev_err(fbi->dev, "%s: invalid upper_margin %d\n",
                        fbi->fb.fix.id, var->upper_margin);
        if (var->lower_margin < 0 || var->lower_margin > 255)
-               printk(KERN_ERR "%s: invalid lower_margin %d\n",
+               dev_err(fbi->dev, "%s: invalid lower_margin %d\n",
                        fbi->fb.fix.id, var->lower_margin);
 #endif
 
@@ -928,10 +924,10 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
                (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
                (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
 
-       DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0);
-       DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1);
-       DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2);
-       DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3);
+       dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0);
+       dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1);
+       dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2);
+       dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3);
 
        half_screen_size = var->bits_per_pixel;
        half_screen_size = half_screen_size * var->xres * var->yres / 16;
@@ -967,7 +963,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
  */
 static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
 {
-       DPRINTK("backlight o%s\n", on ? "n" : "ff");
+       dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff");
 
        if (sa1100fb_backlight_power)
                sa1100fb_backlight_power(on);
@@ -975,7 +971,7 @@ static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
 
 static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
 {
-       DPRINTK("LCD power o%s\n", on ? "n" : "ff");
+       dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff");
 
        if (sa1100fb_lcd_power)
                sa1100fb_lcd_power(on);
@@ -1015,7 +1011,7 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
 
 static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 {
-       DPRINTK("Enabling LCD controller\n");
+       dev_dbg(fbi->dev, "Enabling LCD controller\n");
 
        /*
         * Make sure the mode bits are present in the first palette entry
@@ -1037,19 +1033,19 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
                GPSR |= SHANNON_GPIO_DISP_EN;
        }
 
-       DPRINTK("DBAR1 = 0x%08x\n", DBAR1);
-       DPRINTK("DBAR2 = 0x%08x\n", DBAR2);
-       DPRINTK("LCCR0 = 0x%08x\n", LCCR0);
-       DPRINTK("LCCR1 = 0x%08x\n", LCCR1);
-       DPRINTK("LCCR2 = 0x%08x\n", LCCR2);
-       DPRINTK("LCCR3 = 0x%08x\n", LCCR3);
+       dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
+       dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2);
+       dev_dbg(fbi->dev, "LCCR0 = 0x%08lx\n", LCCR0);
+       dev_dbg(fbi->dev, "LCCR1 = 0x%08lx\n", LCCR1);
+       dev_dbg(fbi->dev, "LCCR2 = 0x%08lx\n", LCCR2);
+       dev_dbg(fbi->dev, "LCCR3 = 0x%08lx\n", LCCR3);
 }
 
 static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 {
        DECLARE_WAITQUEUE(wait, current);
 
-       DPRINTK("Disabling LCD controller\n");
+       dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
        if (machine_is_shannon()) {
                GPCR |= SHANNON_GPIO_DISP_EN;
@@ -1268,7 +1264,7 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
        switch (val) {
        case CPUFREQ_ADJUST:
        case CPUFREQ_INCOMPATIBLE:
-               printk(KERN_DEBUG "min dma period: %d ps, "
+               dev_dbg(fbi->dev, "min dma period: %d ps, "
                        "new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
                        policy->max);
                /* todo: fill in min/max values */
@@ -1459,7 +1455,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
        ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi);
        if (ret) {
-               printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
+               dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
                goto failed;
        }
 
index 7a3d66a5516f397f191f2df122113afe1a980970..b1d5b089ee4a440faa020d24025ad5aa30557509 100644 (file)
@@ -129,15 +129,6 @@ struct sa1100fb_info {
 
 #define SA1100_NAME    "SA1100"
 
-/*
- *  Debug macros 
- */
-#if DEBUG
-#  define DPRINTK(fmt, args...)        printk("%s: " fmt, __func__ , ## args)
-#else
-#  define DPRINTK(fmt, args...)
-#endif
-
 /*
  * Minimum X and Y resolutions
  */