update phonepad board file.

diff --git a/arch/arm/mach-rk29/board-rk29phonepadsdk.c b/arch/arm/mach-rk29/board-rk29phonepadsdk.c
index c13651b7fa42586cac99f72620c00e812f0a35f6..313513872cfeecd3d1e5ea14b1e77c184d121caf 100755 (executable)
--- a/arch/arm/mach-rk29/board-rk29phonepadsdk.c
+++ b/arch/arm/mach-rk29/board-rk29phonepadsdk.c
@@ -759,53 +759,17 @@ static struct mma8452_platform_data mma8452_info = {
 #endif
 
 #if defined (CONFIG_MPU_SENSORS_MPU3050)
-/*mpu3050*/
-static struct mpu3050_platform_data mpu3050_data = {
-               .int_config = 0x10,
-               //.orientation = { 1, 0, 0,0, -1, 0,0, 0, 1 },
-               //.orientation = { 0, 1, 0,-1, 0, 0,0, 0, -1 },
-               //.orientation = { -1, 0, 0,0, -1, 0,0, 0, -1 },
-               .orientation = { 1, 0, 0, 0, 1, 0, 0, 0, -1 },
-               .level_shifter = 0,
-#if defined (CONFIG_MPU_SENSORS_KXTF9)
-               .accel = {
-#ifdef CONFIG_MPU_SENSORS_MPU3050_MODULE
-                               .get_slave_descr = NULL ,
-#else
-                               .get_slave_descr = get_accel_slave_descr ,                      
-#endif
-                               .adapt_num = 0, // The i2c bus to which the mpu device is
-                               // connected
-                               .irq = RK29_PIN0_PA3,
-                               .bus = EXT_SLAVE_BUS_SECONDARY,  //The secondary I2C of MPU
-                               .address = 0x0f,
-                               //.orientation = { 1, 0, 0,0, 1, 0,0, 0, 1 },
-                               //.orientation = { 0, -1, 0,-1, 0, 0,0, 0, -1 },
-                               //.orientation = { 0, 1, 0,1, 0, 0,0, 0, -1 },
-                               
-                               .orientation = { 0, -1, 0, 1, 0, 0, 0, 0, 1 },
-                               //.orientation = { 0, 1, 0, -1, 0, 0, 0, 0, -1 },
-               },
-#endif
-#if defined (CONFIG_MPU_SENSORS_AK8975)
-               .compass = {
-#ifdef CONFIG_MPU_SENSORS_MPU3050_MODULE
-                               .get_slave_descr = NULL,/*ak5883_get_slave_descr,*/
-#else
-                               .get_slave_descr = get_compass_slave_descr,
-#endif                                         
-                               .adapt_num = 0, // The i2c bus to which the compass device is. 
-                               // It can be difference with mpu
-                               // connected
-                               .irq = RK29_PIN0_PA4,
-                               .bus = EXT_SLAVE_BUS_PRIMARY,
-                               .address = 0x0d,
-                               //.orientation = { -1, 0, 0,0, -1, 0,0, 0, 1 },
-                               //.orientation = { 0, -1, 0,-1, 0, 0,0, 0, -1 },
-                               //.orientation = { 0, 1, 0,1, 0, 0,0, 0, -1 },
-                               .orientation = { 1, 0, 0, 0, -1, 0, 0, 0, -1 },
-               },
+static struct mpu_platform_data mpu3050_data = {
+       .int_config = 0x10,
+       .orientation ={ 1, 0, 0, 0, 1, 0, 0, 0, -1 },
+};
 #endif
+/* accel */
+#if defined (CONFIG_MPU_SENSORS_BMA222)
+static struct ext_slave_platform_data inv_mpu_bma222_data = {
+       .bus         = EXT_SLAVE_BUS_SECONDARY,
+       .adapt_num = 0,
+       .orientation = { -1, 0, 0, 0, -1, 0, 0, 0, 1 },
 };
 #endif
 
@@ -938,6 +902,8 @@ static struct wm8994_pdata wm8994_platform_data = {
 
        .micdet_irq = 0,
        .irq_base = 0,
+       .PA_control_pin=RK29_PIN6_PB6,
+       
 };
 #endif 
 
@@ -1212,6 +1178,16 @@ static struct i2c_board_info __initdata board_i2c0_devices[] = {
                .irq                    = RK29_PIN0_PA4,
        },
 #endif
+#if defined (CONFIG_MPU_SENSORS_BMA222)
+       {
+               .type                   = "bma222",
+               .addr           = 0x08,
+               .flags                  = 0,
+//             .irq                    = RK29_PIN0_PA3,
+               .platform_data = &inv_mpu_bma222_data,
+       },
+
+#endif
 /*mpu3050*/
 #if defined (CONFIG_MPU_SENSORS_MPU3050) 
        {
@@ -1302,6 +1278,30 @@ static struct i2c_board_info __initdata board_i2c2_devices[] = {
 #endif
 };
 #endif
+
+#define        CONFIG_TDA998 1
+#if defined (CONFIG_TDA998)
+#define HDMI_V33_CTL RK29_PIN6_PD3 //3.3V power control
+#define HDMI_V5_CTL    RK29_PIN4_PD0  //5V power control
+#define HDMI_DET_PIN   RK29_PIN1_PD7  //DET PIN
+int tda998_io_init(void)
+{
+       printk("enter tda998_io_init()\n");
+       gpio_request(HDMI_V33_CTL, "hdmi pwr ctl 0");
+       gpio_request(HDMI_V5_CTL, "hdmi v5 ctl 1");
+       gpio_direction_output(HDMI_V33_CTL, GPIO_HIGH);
+       gpio_direction_output(HDMI_V5_CTL, GPIO_HIGH);
+       gpio_request(HDMI_DET_PIN, "hdmi det");
+  gpio_direction_input(HDMI_DET_PIN);
+       mdelay(10);
+       return 0;
+}
+struct hdmi_platform_data tda998_data = {
+       .io_init = tda998_io_init,
+};
+#endif
+
+
 #if defined (CONFIG_ANX7150)
 #define HDMI_V33_CTL RK29_PIN6_PD3 //3.3V power control
 #define HDMI_V5_CTL    RK29_PIN4_PD0  //5V power control
@@ -1332,6 +1332,25 @@ static struct i2c_board_info __initdata board_i2c3_devices[] = {
     },
 #endif
 
+#if defined (CONFIG_TDA998)
+    {
+               .type           = "tda998X",
+        .addr           = (0x70>>1),             //0x39, 0x3d
+        .flags          = 0,
+        .irq            = RK29_PIN1_PD7,
+               .platform_data  = &tda998_data,
+    },
+    {
+               .type           = "tda99Xcec",
+        .addr           = (0x34>>1),             //0x39, 0x3d
+        .flags          = 0,
+        .irq            = RK29_PIN1_PD7,
+               .platform_data  = &tda998_data,
+    },
+    
+#endif
+
+
 };
 #endif
 
@@ -2229,9 +2248,36 @@ static struct platform_device rk29_device_keys = {
 
 static void __init rk29_board_iomux_init(void)
 {
-       #ifdef CONFIG_RK29_PWM_REGULATOR
+       int err;
+#ifdef CONFIG_RK29_PWM_REGULATOR
        rk29_mux_api_set(REGULATOR_PWM_MUX_NAME,REGULATOR_PWM_MUX_MODE);
-       #endif
+#endif
+
+#ifdef CONFIG_RK29_CLK_SWITCH_TO_32K
+/****************************clock change********************************************/
+       err = gpio_request(RK29_PIN4_PC0, "clk27M_control");
+       if (err) {
+               gpio_free(RK29_PIN4_PC0);
+               printk("-------request RK29_PIN4_PC0 fail--------\n");
+               return -1;
+       }
+       //phy power down
+       gpio_direction_output(RK29_PIN4_PC0, GPIO_LOW);// 27M  32K
+       gpio_set_value(RK29_PIN4_PC0, GPIO_LOW);
+
+       rk29_mux_api_set(GPIO4C5_RMIICSRDVALID_MIIRXDVALID_NAME,GPIO4H_GPIO4C5);
+
+       err = gpio_request(RK29_PIN4_PC5, "clk24M_control");
+       if (err) {
+               gpio_free(RK29_PIN4_PC5);
+               printk("-------request RK29_PIN4_PC5 fail--------\n");
+               return -1;
+       }
+       //phy power down
+       gpio_direction_output(RK29_PIN4_PC5, GPIO_LOW);// control 24M
+       gpio_set_value(RK29_PIN4_PC5, GPIO_LOW);
+/*******************************************************************/
+#endif
 }
 
 static struct platform_device *devices[] __initdata = {