--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PANIC_TIMEOUT=1
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_ASHMEM=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_ARCH_RK30=y
+# CONFIG_DDR_TEST is not set
+CONFIG_ARCH_RK3066B=y
+CONFIG_MACH_RK3066B_M701=y
+CONFIG_FIQ_DEBUGGER=y
+CONFIG_FIQ_DEBUGGER_NO_SLEEP=y
+CONFIG_FIQ_DEBUGGER_CONSOLE=y
+CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+CONFIG_NR_CPUS=2
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_WAKELOCK=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
+CONFIG_NF_CONNTRACK_AMANDA=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_H323=y
+CONFIG_NF_CONNTRACK_IRC=y
+CONFIG_NF_CONNTRACK_NETBIOS_NS=y
+CONFIG_NF_CONNTRACK_PPTP=y
+CONFIG_NF_CONNTRACK_SANE=y
+CONFIG_NF_CONNTRACK_SIP=y
+CONFIG_NF_CONNTRACK_TFTP=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_TPROXY=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_TARGET_NFLOG=y
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
+CONFIG_NETFILTER_XT_TARGET_TPROXY=y
+CONFIG_NETFILTER_XT_TARGET_TRACE=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_HELPER=y
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LENGTH=y
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_POLICY=y
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
+CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
+CONFIG_NETFILTER_XT_MATCH_SOCKET=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
+CONFIG_NETFILTER_XT_MATCH_STRING=y
+CONFIG_NETFILTER_XT_MATCH_TIME=y
+CONFIG_NETFILTER_XT_MATCH_U32=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP6_NF_MANGLE=y
+CONFIG_IP6_NF_RAW=y
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_PHONET=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_INGRESS=y
+CONFIG_NET_CLS_U32=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_U32=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=y
+CONFIG_NET_ACT_MIRRED=y
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM4325=y
+CONFIG_BT_AUTOSLEEP=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_RK=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_RKNAND=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_MISC_DEVICES=y
+CONFIG_UID_STAT=y
+CONFIG_APANIC=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN_80211=y
+CONFIG_RKWIFI=y
+CONFIG_USB_USBNET=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=y
+CONFIG_PPPOLAC=y
+CONFIG_PPPOPNS=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_XPAD=y
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=y
+CONFIG_TABLET_USB_AIPTEK=y
+CONFIG_TABLET_USB_GTCO=y
+CONFIG_TABLET_USB_HANWANG=y
+CONFIG_TABLET_USB_KBTAB=y
+CONFIG_TABLET_USB_WACOM=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_FT5306=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_KEYCHORD=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_COMPASS_AK8975=y
+CONFIG_GS_MMA8452=y
+CONFIG_GS_LIS3DH=y
+CONFIG_GYRO_L3G4200D=y
+CONFIG_LS_CM3217=y
+CONFIG_SENSOR_DEVICE=y
+CONFIG_GSENSOR_DEVICE=y
+CONFIG_GS_KXTIK=y
+CONFIG_COMPASS_DEVICE=y
+CONFIG_GYROSCOPE_DEVICE=y
+CONFIG_LIGHT_DEVICE=y
+CONFIG_LS_AL3006=y
+CONFIG_LS_STK3171=y
+CONFIG_PROXIMITY_DEVICE=y
+CONFIG_PS_AL3006=y
+CONFIG_PS_STK3171=y
+# CONFIG_SERIO is not set
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_RK29=y
+CONFIG_UART0_RK29=y
+CONFIG_UART0_CTS_RTS_RK29=y
+CONFIG_UART3_RK29=y
+CONFIG_UART3_CTS_RTS_RK29=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C0_CONTROLLER_RK30=y
+CONFIG_I2C1_CONTROLLER_RK30=y
+CONFIG_I2C2_CONTROLLER_RK30=y
+CONFIG_I2C3_CONTROLLER_RK30=y
+CONFIG_I2C4_CONTROLLER_RK30=y
+CONFIG_GPIO_WM831X=y
+CONFIG_EXPANDED_GPIO_NUM=0
+CONFIG_EXPANDED_GPIO_IRQ_NUM=0
+CONFIG_SPI_FPGA_GPIO_NUM=0
+CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0
+CONFIG_POWER_SUPPLY=y
+CONFIG_TEST_POWER=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_WM831X_I2C=y
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_RK610=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_WM831X=y
+CONFIG_RK30_PWM_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2659=y
+CONFIG_SOC_CAMERA_OV5642=y
+CONFIG_VIDEO_RK29=y
+CONFIG_VIDEO_RK29_CAMMEM_ION=y
+CONFIG_ION=y
+CONFIG_ION_ROCKCHIP=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_LCD_B101EW05=y
+CONFIG_FB_ROCKCHIP=y
+CONFIG_LCDC_RK31=y
+CONFIG_LCDC1_RK31=y
+CONFIG_RGA_RK30=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_RK29_SOC=y
+CONFIG_SND_RK29_SOC_I2S_2CH=y
+CONFIG_SND_I2S_DMA_EVENT_STATIC=y
+CONFIG_SND_RK29_SOC_RK610=y
+CONFIG_SND_RK29_CODEC_SOC_SLAVE=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_ACRUX=y
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=y
+CONFIG_HID_ELECOM=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KEYTOUCH=y
+CONFIG_HID_KYE=y
+CONFIG_HID_UCLOGIC=y
+CONFIG_HID_WALTOP=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LCPOWER=y
+CONFIG_HID_LOGITECH=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWII_FF=y
+CONFIG_HID_MAGICMOUSE=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_MULTITOUCH=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_PICOLCD=y
+CONFIG_HID_QUANTA=y
+CONFIG_HID_ROCCAT_ARVO=y
+CONFIG_HID_ROCCAT_KONE=y
+CONFIG_HID_ROCCAT_KONEPLUS=y
+CONFIG_HID_ROCCAT_KOVAPLUS=y
+CONFIG_HID_ROCCAT_PYRA=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_OPTION=y
+CONFIG_USB_GADGET=y
+CONFIG_USB20_HOST=y
+CONFIG_USB20_OTG=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_EMBEDDED_SDIO=y
+CONFIG_MMC_PARANOID_SD_INIT=y
+CONFIG_SDMMC_RK29=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_SWITCH=y
+CONFIG_SWITCH_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_WM831X=y
+CONFIG_TPS65910_RTC=y
+CONFIG_STAGING=y
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_TIMED_GPIO=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+# CONFIG_CMMB is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
+CONFIG_ENABLE_DEFAULT_TRACERS=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_TWOFISH=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
--- /dev/null
+/*
+ *
+ * Copyright (C) 2012 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/spi/spi.h>
+#include <linux/mmc/host.h>
+#include <linux/ion.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <mach/dvfs.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+#include <linux/fb.h>
+#include <linux/regulator/machine.h>
+#include <linux/rfkill-rk.h>
+#include <linux/sensor-dev.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/regulator/rk29-pwm-regulator.h>
+#if defined(CONFIG_HDMI_RK30)
+ #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
+#endif
+
+#if defined(CONFIG_SPIM_RK29)
+#include "../../../drivers/spi/rk29_spim.h"
+#endif
+#if defined(CONFIG_MU509)
+#include <linux/mu509.h>
+#endif
+#if defined(CONFIG_MW100)
+#include <linux/mw100.h>
+#endif
+#if defined(CONFIG_MT6229)
+#include <linux/mt6229.h>
+#endif
+#if defined(CONFIG_SEW868)
+#include <linux/sew868.h>
+#endif
+#if defined(CONFIG_ANDROID_TIMED_GPIO)
+#include "../../../drivers/staging/android/timed_gpio.h"
+#endif
+
+#ifdef CONFIG_THREE_FB_BUFFER
+#define RK30_FB0_MEM_SIZE 12*SZ_1M
+#else
+#define RK30_FB0_MEM_SIZE 8*SZ_1M
+#endif
+
+#include "board-rk3066b-sdk-camera.c"
+#include "board-rk3066b-m701-key.c"
+
+#if defined(CONFIG_TOUCHSCREEN_GT8XX)
+#define TOUCH_RESET_PIN RK30_PIN2_PC0
+#define TOUCH_PWR_PIN RK30_PIN2_PB4
+static int goodix_init_platform_hw(void)
+{
+ int ret;
+
+ rk30_mux_api_set(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME, GPIO2C_GPIO2C0);
+ rk30_mux_api_set(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME, GPIO2B_GPIO2B4);
+ printk("%s:0x%x,0x%x\n",__func__,rk30_mux_api_get(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME),rk30_mux_api_get(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME));
+
+ if (TOUCH_PWR_PIN != INVALID_GPIO) {
+ ret = gpio_request(TOUCH_PWR_PIN, "goodix power pin");
+ if (ret != 0) {
+ gpio_free(TOUCH_PWR_PIN);
+ printk("goodix power error\n");
+ return -EIO;
+ }
+ gpio_direction_output(TOUCH_PWR_PIN, 0);
+ gpio_set_value(TOUCH_PWR_PIN, GPIO_LOW);
+ msleep(100);
+ }
+
+ if (TOUCH_RESET_PIN != INVALID_GPIO) {
+ ret = gpio_request(TOUCH_RESET_PIN, "goodix reset pin");
+ if (ret != 0) {
+ gpio_free(TOUCH_RESET_PIN);
+ printk("goodix gpio_request error\n");
+ return -EIO;
+ }
+ gpio_direction_output(TOUCH_RESET_PIN, 1);
+ msleep(100);
+ //gpio_set_value(TOUCH_RESET_PIN, GPIO_LOW);
+ //msleep(100);
+ //gpio_set_value(TOUCH_RESET_PIN, GPIO_HIGH);
+ //msleep(500);
+ }
+ return 0;
+}
+
+struct goodix_platform_data goodix_info = {
+ .model = 8105,
+ .irq_pin = RK30_PIN0_PD4,
+ .rest_pin = TOUCH_RESET_PIN,
+ .init_platform_hw = goodix_init_platform_hw,
+};
+#endif
+
+#if defined (CONFIG_TOUCHSCREEN_FT5306)
+
+#define TOUCH_RESET_PIN RK30_PIN2_PC0
+#define TOUCH_INT_PIN RK30_PIN0_PD4
+#define TOUCH_PWR_PIN RK30_PIN2_PB4
+
+static int ft5x0x_init_platform_hw(void)
+{
+
+ rk30_mux_api_set(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME, GPIO2C_GPIO2C0);
+ rk30_mux_api_set(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME, GPIO2B_GPIO2B4);
+ //printk("%s:0x%x,0x%x\n",__func__,rk30_mux_api_get(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME),rk30_mux_api_get(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME));
+
+ printk("==ft5x0x_init_platform_hw =\n");
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("ft5606_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("ift5606_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ mdelay(50);
+ gpio_direction_input(TOUCH_INT_PIN);
+ mdelay(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(300);
+ return 0;
+}
+
+void ft5x0x_exit_platform_hw(void)
+{
+ printk("ft5606_exit_platform_hw\n");
+ gpio_free(TOUCH_RESET_PIN);
+ gpio_free(TOUCH_INT_PIN);
+}
+
+int ft5x0x_platform_sleep(void)
+{
+ printk("ft5606_platform_sleep\n");
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ return 0;
+}
+
+int ft5x0x_platform_wakeup(void)
+{
+ printk("ft5606_platform_wakeup\n");
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(300);
+ return 0;
+}
+
+static struct ft5606_platform_data ft5x0x_info = {
+ .init_platform_hw= ft5x0x_init_platform_hw,
+ .exit_platform_hw= ft5x0x_exit_platform_hw,
+ .platform_sleep = ft5x0x_platform_sleep,
+ .platform_wakeup = ft5x0x_platform_wakeup,
+};
+#endif
+
+
+static struct spi_board_info board_spi_devices[] = {
+};
+
+/***********************************************************
+* rk30 backlight
+************************************************************/
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+#define PWM_ID 2
+#define PWM_MUX_NAME GPIO3D5_PWM2_JTAGTCK_OTGDRVVBUS_NAME
+#define PWM_MUX_MODE GPIO3D_PWM2
+#define PWM_MUX_MODE_GPIO GPIO3D_GPIO3D5
+#define PWM_GPIO RK30_PIN3_PD5
+#define PWM_EFFECT_VALUE 0
+
+#define LCD_DISP_ON_PIN
+
+#ifdef LCD_DISP_ON_PIN
+#define BL_EN_PIN RK30_PIN0_PA2
+#define BL_EN_VALUE GPIO_HIGH
+#endif
+static int rk29_backlight_io_init(void)
+{
+ int ret = 0;
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+#ifdef LCD_DISP_ON_PIN
+ // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
+
+ ret = gpio_request(BL_EN_PIN, NULL);
+ if (ret != 0) {
+ gpio_free(BL_EN_PIN);
+ }
+
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return ret;
+}
+
+static int rk29_backlight_io_deinit(void)
+{
+ int ret = 0;
+#ifdef LCD_DISP_ON_PIN
+ gpio_free(BL_EN_PIN);
+#endif
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ return ret;
+}
+
+static int rk29_backlight_pwm_suspend(void)
+{
+ int ret = 0;
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+ if (gpio_request(PWM_GPIO, NULL)) {
+ printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
+ return -1;
+ }
+ gpio_direction_output(PWM_GPIO, GPIO_LOW);
+#ifdef LCD_DISP_ON_PIN
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
+#endif
+ return ret;
+}
+
+static int rk29_backlight_pwm_resume(void)
+{
+ gpio_free(PWM_GPIO);
+ rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+#ifdef LCD_DISP_ON_PIN
+ msleep(30);
+ gpio_direction_output(BL_EN_PIN, 1);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return 0;
+}
+
+static struct rk29_bl_info rk29_bl_info = {
+ .pwm_id = PWM_ID,
+ .bl_ref = PWM_EFFECT_VALUE,
+ .io_init = rk29_backlight_io_init,
+ .io_deinit = rk29_backlight_io_deinit,
+ .pwm_suspend = rk29_backlight_pwm_suspend,
+ .pwm_resume = rk29_backlight_pwm_resume,
+};
+
+static struct platform_device rk29_device_backlight = {
+ .name = "rk29_backlight",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_bl_info,
+ }
+};
+
+#endif
+
+#ifdef CONFIG_RK29_SUPPORT_MODEM
+
+#define RK30_MODEM_POWER RK30_PIN2_PB0
+#define RK30_MODEM_POWER_IOMUX rk29_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0)
+
+static int rk30_modem_io_init(void)
+{
+ printk("%s\n", __FUNCTION__);
+ RK30_MODEM_POWER_IOMUX;
+
+ return 0;
+}
+
+static struct rk29_io_t rk30_modem_io = {
+ .io_addr = RK30_MODEM_POWER,
+ .enable = GPIO_HIGH,
+ .disable = GPIO_LOW,
+ .io_init = rk30_modem_io_init,
+};
+
+static struct platform_device rk30_device_modem = {
+ .name = "rk30_modem",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk30_modem_io,
+ }
+};
+#endif
+#if defined(CONFIG_MU509)
+static int mu509_io_init(void)
+{
+
+ rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
+ rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
+ rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
+ rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
+ return 0;
+}
+
+static int mu509_io_deinit(void)
+{
+
+ return 0;
+}
+
+struct rk29_mu509_data rk29_mu509_info = {
+ .io_init = mu509_io_init,
+ .io_deinit = mu509_io_deinit,
+ .modem_power_en = RK30_PIN2_PB0,
+ .bp_power = RK30_PIN2_PB0,
+ .bp_reset = RK30_PIN2_PD1,
+ .ap_wakeup_bp = RK30_PIN2_PB7,
+ .bp_wakeup_ap = RK30_PIN6_PA0,
+};
+struct platform_device rk29_device_mu509 = {
+ .name = "mu509",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_mu509_info,
+ }
+ };
+#endif
+#if defined(CONFIG_MW100)
+static int mw100_io_init(void)
+{
+ rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
+ rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
+ rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
+ rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
+ return 0;
+}
+
+static int mw100_io_deinit(void)
+{
+
+ return 0;
+}
+
+struct rk29_mw100_data rk29_mw100_info = {
+ .io_init = mw100_io_init,
+ .io_deinit = mw100_io_deinit,
+ .modem_power_en = RK30_PIN6_PB0,
+ .bp_power = RK30_PIN2_PB0,
+ .bp_reset = RK30_PIN2_PD1,
+ .ap_wakeup_bp = RK30_PIN2_PB7,
+ .bp_wakeup_ap = RK30_PIN6_PA0,
+};
+struct platform_device rk29_device_mw100 = {
+ .name = "mw100",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_mw100_info,
+ }
+ };
+#endif
+#if defined(CONFIG_MT6229)
+static int mt6229_io_init(void)
+{
+ rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
+ rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
+ rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
+ rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
+ return 0;
+}
+
+static int mt6229_io_deinit(void)
+{
+
+ return 0;
+}
+
+struct rk29_mt6229_data rk29_mt6229_info = {
+ .io_init = mt6229_io_init,
+ .io_deinit = mt6229_io_deinit,
+ .modem_power_en = RK30_PIN2_PB0,
+ .bp_power = RK30_PIN2_PB0,//RK30_PIN2_PB6,
+ .bp_reset = RK30_PIN2_PD1,
+ .ap_wakeup_bp = RK30_PIN2_PC0,
+ .bp_wakeup_ap = RK30_PIN6_PA0,
+};
+struct platform_device rk29_device_mt6229 = {
+ .name = "mt6229",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_mt6229_info,
+ }
+ };
+#endif
+#if defined(CONFIG_SEW868)
+static int sew868_io_init(void)
+{
+ rk30_mux_api_set(GPIO2B6_LCDC1DATA14_SMCADDR18_TSSYNC_NAME, GPIO2B_GPIO2B6);
+ rk30_mux_api_set(GPIO4D2_SMCDATA10_TRACEDATA10_NAME, GPIO4D_GPIO4D2);
+ rk30_mux_api_set(GPIO4D4_SMCDATA12_TRACEDATA12_NAME, GPIO4D_GPIO4D4);
+ return 0;
+}
+static int sew868_io_deinit(void)
+{
+ return 0;
+}
+struct rk30_sew868_data rk30_sew868_info = {
+ .io_init = sew868_io_init,
+ .io_deinit = sew868_io_deinit,
+ .bp_power = RK30_PIN6_PB2,
+ .bp_power_active_low = 1,
+ .bp_sys = RK30_PIN2_PB6,
+ .bp_reset = RK30_PIN4_PD2,
+ .bp_reset_active_low = 1,
+ .bp_wakeup_ap = RK30_PIN4_PD4,
+ .ap_wakeup_bp = NULL,
+};
+
+struct platform_device rk30_device_sew868 = {
+ .name = "sew868",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk30_sew868_info,
+ }
+ };
+#endif
+
+
+#if defined (CONFIG_GS_MMA7660)
+#define MMA7660_INT_PIN RK30_PIN4_PC0
+static int gs_init_platform_hw(void)
+{
+ rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
+ if(gpio_request(MMA7660_INT_PIN, NULL) != 0){
+ gpio_free(MMA7660_INT_PIN);
+ printk("gsensor gpio_request error\n");
+ return -EIO;
+ }
+ //gpio_direction_input(MMA7660_INT_PIN);
+ gpio_pull_updown(MMA7660_INT_PIN, 1);
+ return 0;
+}
+
+
+static struct gs_platform_data mma7660_info = {
+ .model= 7660,
+ .swap_xy = 0,
+ .init_platform_hw= gs_init_platform_hw,
+};
+#endif
+
+
+/*MMA8452 gsensor*/
+#if defined (CONFIG_GS_MMA8452)
+#define MMA8452_INT_PIN RK30_PIN3_PD7
+
+static int mma8452_init_platform_hw(void)
+{
+ return 0;
+}
+
+static struct sensor_platform_data mma8452_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = mma8452_init_platform_hw,
+ .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
+};
+#endif
+#if defined (CONFIG_GS_LIS3DH)
+#define LIS3DH_INT_PIN RK30_PIN3_PD7
+
+static int lis3dh_init_platform_hw(void)
+{
+
+ return 0;
+}
+
+static struct sensor_platform_data lis3dh_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = lis3dh_init_platform_hw,
+ .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
+};
+#endif
+#if defined (CONFIG_COMPASS_AK8975)
+static struct sensor_platform_data akm8975_info =
+{
+ .type = SENSOR_TYPE_COMPASS,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .m_layout =
+ {
+ {
+ {1, 0, 0},
+ {0, 1, 0},
+ {0, 0, 1},
+ },
+
+ {
+ {1, 0, 0},
+ {0, 1, 0},
+ {0, 0, 1},
+ },
+
+ {
+ {1, 0, 0},
+ {0, 1, 0},
+ {0, 0, 1},
+ },
+
+ {
+ {1, 0, 0},
+ {0, 1, 0},
+ {0, 0, 1},
+ },
+ }
+};
+
+#endif
+
+#if defined(CONFIG_GYRO_L3G4200D)
+
+#include <linux/l3g4200d.h>
+#define L3G4200D_INT_PIN RK30_PIN0_PB4
+
+static int l3g4200d_init_platform_hw(void)
+{
+ return 0;
+}
+
+static struct sensor_platform_data l3g4200d_info = {
+ .type = SENSOR_TYPE_GYROSCOPE,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
+ .init_platform_hw = l3g4200d_init_platform_hw,
+ .x_min = 40,//x_min,y_min,z_min = (0-100) according to hardware
+ .y_min = 40,
+ .z_min = 20,
+};
+
+#endif
+
+#ifdef CONFIG_LS_CM3217
+static struct sensor_platform_data cm3217_info = {
+ .type = SENSOR_TYPE_LIGHT,
+ .irq_enable = 0,
+ .poll_delay_ms = 500,
+};
+
+#endif
+
+#ifdef CONFIG_FB_ROCKCHIP
+
+#define LCD_CS_PIN INVALID_GPIO
+#define LCD_CS_VALUE GPIO_HIGH
+
+#define LCD_EN_PIN RK30_PIN0_PB0
+#define LCD_EN_VALUE GPIO_HIGH
+
+static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
+{
+ int ret = 0;
+
+ if(LCD_CS_PIN !=INVALID_GPIO)
+ {
+ ret = gpio_request(LCD_CS_PIN, NULL);
+ if (ret != 0)
+ {
+ gpio_free(LCD_CS_PIN);
+ printk(KERN_ERR "request lcd cs pin fail!\n");
+ return -1;
+ }
+ else
+ {
+ gpio_direction_output(LCD_CS_PIN, LCD_CS_VALUE);
+ }
+ }
+
+ if(LCD_EN_PIN !=INVALID_GPIO)
+ {
+ ret = gpio_request(LCD_EN_PIN, NULL);
+ if (ret != 0)
+ {
+ gpio_free(LCD_EN_PIN);
+ printk(KERN_ERR "request lcd en pin fail!\n");
+ return -1;
+ }
+ else
+ {
+ gpio_direction_output(LCD_EN_PIN, LCD_EN_VALUE);
+ }
+ }
+ return 0;
+}
+static int rk_fb_io_disable(void)
+{
+ if(LCD_CS_PIN !=INVALID_GPIO)
+ {
+ gpio_set_value(LCD_CS_PIN, !LCD_CS_VALUE);
+ }
+ if(LCD_EN_PIN !=INVALID_GPIO)
+ {
+ gpio_set_value(LCD_EN_PIN, !LCD_EN_VALUE);
+ }
+ return 0;
+}
+static int rk_fb_io_enable(void)
+{
+ if(LCD_CS_PIN !=INVALID_GPIO)
+ {
+ gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE);
+ }
+ if(LCD_EN_PIN !=INVALID_GPIO)
+ {
+ gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
+ }
+ return 0;
+}
+
+#if defined(CONFIG_LCDC0_RK31)
+struct rk29fb_info lcdc0_screen_info = {
+ .prop = PRMRY, //primary display device
+ .io_init = rk_fb_io_init,
+ .io_disable = rk_fb_io_disable,
+ .io_enable = rk_fb_io_enable,
+ .set_screen_info = set_lcd_info,
+};
+#endif
+
+#if defined(CONFIG_LCDC1_RK31)
+struct rk29fb_info lcdc1_screen_info = {
+ #if defined(CONFIG_HDMI_RK30)
+ .prop = EXTEND, //extend display device
+ .lcd_info = NULL,
+ .set_screen_info = hdmi_init_lcdc,
+ #endif
+};
+#endif
+
+static struct resource resource_fb[] = {
+ [0] = {
+ .name = "fb0 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "ipp buf", //for rotate
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "fb2 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device device_fb = {
+ .name = "rk-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resource_fb),
+ .resource = resource_fb,
+};
+#endif
+
+#if defined(CONFIG_LCDC0_RK31)
+static struct resource resource_lcdc0[] = {
+ [0] = {
+ .name = "lcdc0 reg",
+ .start = RK30_LCDC0_PHYS,
+ .end = RK30_LCDC0_PHYS + RK30_LCDC0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .name = "lcdc0 irq",
+ .start = IRQ_LCDC0,
+ .end = IRQ_LCDC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc0 = {
+ .name = "rk30-lcdc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(resource_lcdc0),
+ .resource = resource_lcdc0,
+ .dev = {
+ .platform_data = &lcdc0_screen_info,
+ },
+};
+#endif
+#if defined(CONFIG_LCDC1_RK31)
+static struct resource resource_lcdc1[] = {
+ [0] = {
+ .name = "lcdc1 reg",
+ .start = RK30_LCDC1_PHYS,
+ .end = RK30_LCDC1_PHYS + RK30_LCDC1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "lcdc1 irq",
+ .start = IRQ_LCDC1,
+ .end = IRQ_LCDC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc1 = {
+ .name = "rk30-lcdc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(resource_lcdc1),
+ .resource = resource_lcdc1,
+ .dev = {
+ .platform_data = &lcdc1_screen_info,
+ },
+};
+#endif
+
+#ifdef CONFIG_ANDROID_TIMED_GPIO
+static struct timed_gpio timed_gpios[] = {
+ {
+ .name = "vibrator",
+ .gpio = RK30_PIN3_PD3,
+ .max_timeout = 1000,
+ .active_low = 0,
+ .adjust_time =20, //adjust for diff product
+ },
+};
+
+static struct timed_gpio_platform_data rk29_vibrator_info = {
+ .num_gpios = 1,
+ .gpios = timed_gpios,
+};
+
+static struct platform_device rk29_device_vibrator = {
+ .name = "timed-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_vibrator_info,
+ },
+
+};
+#endif
+
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+static struct gpio_led rk29_leds[] = {
+ {
+ .name = "button-backlight",
+ .gpio = RK30_PIN2_PB3,
+ .default_trigger = "timer",
+ .active_low = 0,
+ .retain_state_suspended = 0,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+};
+
+static struct gpio_led_platform_data rk29_leds_pdata = {
+ .leds = rk29_leds,
+ .num_leds = ARRAY_SIZE(rk29_leds),
+};
+
+static struct platform_device rk29_device_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_leds_pdata,
+ },
+};
+#endif
+
+#ifdef CONFIG_RK_IRDA
+#define IRDA_IRQ_PIN RK30_PIN0_PA3
+
+static int irda_iomux_init(void)
+{
+ int ret = 0;
+
+ //irda irq pin
+ ret = gpio_request(IRDA_IRQ_PIN, NULL);
+ if (ret != 0) {
+ gpio_free(IRDA_IRQ_PIN);
+ printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
+ }
+ gpio_pull_updown(IRDA_IRQ_PIN, PullDisable);
+ gpio_direction_input(IRDA_IRQ_PIN);
+
+ return 0;
+}
+
+static int irda_iomux_deinit(void)
+{
+ gpio_free(IRDA_IRQ_PIN);
+ return 0;
+}
+
+static struct irda_info rk29_irda_info = {
+ .intr_pin = IRDA_IRQ_PIN,
+ .iomux_init = irda_iomux_init,
+ .iomux_deinit = irda_iomux_deinit,
+ //.irda_pwr_ctl = bu92747guw_power_ctl,
+};
+
+static struct platform_device irda_device = {
+#ifdef CONFIG_RK_IRDA_NET
+ .name = "rk_irda",
+#else
+ .name = "bu92747_irda",
+#endif
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_irda_info,
+ }
+};
+#endif
+
+#ifdef CONFIG_ION
+#define ION_RESERVE_SIZE (80 * SZ_1M)
+static struct ion_platform_data rk30_ion_pdata = {
+ .nr = 1,
+ .heaps = {
+ {
+ .type = ION_HEAP_TYPE_CARVEOUT,
+ .id = ION_NOR_HEAP_ID,
+ .name = "norheap",
+ .size = ION_RESERVE_SIZE,
+ }
+ },
+};
+
+static struct platform_device device_ion = {
+ .name = "ion-rockchip",
+ .id = 0,
+ .dev = {
+ .platform_data = &rk30_ion_pdata,
+ },
+};
+#endif
+
+/**************************************************************************************************
+ * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
+**************************************************************************************************/
+#ifdef CONFIG_SDMMC_RK29
+#include "board-rk3066b-sdk-sdmmc.c"
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB7 //According to your own project to set the value of write-protect-pin.
+#endif
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PC7 //According to your own project to set the value of write-protect-pin.
+#endif
+
+#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK30_PIN6_PB2
+
+#endif //endif ---#ifdef CONFIG_SDMMC_RK29
+
+#ifdef CONFIG_SDMMC0_RK29
+static int rk29_sdmmc0_cfg_gpio(void)
+{
+#ifdef CONFIG_SDMMC_RK29_OLD
+ rk30_mux_api_set(GPIO3B1_SDMMC0CMD_NAME, GPIO3B_SDMMC0_CMD);
+ rk30_mux_api_set(GPIO3B0_SDMMC0CLKOUT_NAME, GPIO3B_SDMMC0_CLKOUT);
+ rk30_mux_api_set(GPIO3B2_SDMMC0DATA0_NAME, GPIO3B_SDMMC0_DATA0);
+ rk30_mux_api_set(GPIO3B3_SDMMC0DATA1_NAME, GPIO3B_SDMMC0_DATA1);
+ rk30_mux_api_set(GPIO3B4_SDMMC0DATA2_NAME, GPIO3B_SDMMC0_DATA2);
+ rk30_mux_api_set(GPIO3B5_SDMMC0DATA3_NAME, GPIO3B_SDMMC0_DATA3);
+
+ rk30_mux_api_set(GPIO3B6_SDMMC0DETECTN_NAME, GPIO3B_GPIO3B6);
+
+ rk30_mux_api_set(GPIO3A7_SDMMC0PWREN_NAME, GPIO3A_GPIO3A7);
+ gpio_request(RK30_PIN3_PA7, "sdmmc-power");
+ gpio_direction_output(RK30_PIN3_PA7, GPIO_LOW);
+
+#else
+ rk29_sdmmc_set_iomux(0, 0xFFFF);
+
+ rk30_mux_api_set(GPIO3B0_SDMMC0DETECTN_NAME, GPIO3B_SDMMC0DETECTN);
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
+ gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
+#endif
+
+#endif
+
+ return 0;
+}
+
+#define CONFIG_SDMMC0_USE_DMA
+struct rk29_sdmmc_platform_data default_sdmmc0_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .io_init = rk29_sdmmc0_cfg_gpio,
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+ .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+
+ .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+ .detect_irq = RK30_PIN3_PB6, // INVALID_GPIO
+ .enable_sd_wakeup = 0,
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC0_WRITE_PROTECT_PIN,
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+};
+#endif // CONFIG_SDMMC0_RK29
+
+#ifdef CONFIG_SDMMC1_RK29
+#define CONFIG_SDMMC1_USE_DMA
+static int rk29_sdmmc1_cfg_gpio(void)
+{
+#if defined(CONFIG_SDMMC_RK29_OLD)
+ rk30_mux_api_set(GPIO3C0_SMMC1CMD_NAME, GPIO3C_SMMC1_CMD);
+ rk30_mux_api_set(GPIO3C5_SDMMC1CLKOUT_NAME, GPIO3C_SDMMC1_CLKOUT);
+ rk30_mux_api_set(GPIO3C1_SDMMC1DATA0_NAME, GPIO3C_SDMMC1_DATA0);
+ rk30_mux_api_set(GPIO3C2_SDMMC1DATA1_NAME, GPIO3C_SDMMC1_DATA1);
+ rk30_mux_api_set(GPIO3C3_SDMMC1DATA2_NAME, GPIO3C_SDMMC1_DATA2);
+ rk30_mux_api_set(GPIO3C4_SDMMC1DATA3_NAME, GPIO3C_SDMMC1_DATA3);
+ //rk30_mux_api_set(GPIO3C6_SDMMC1DETECTN_NAME, GPIO3C_SDMMC1_DETECT_N);
+
+#else
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
+ gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
+#endif
+
+#endif
+
+ return 0;
+}
+
+struct rk29_sdmmc_platform_data default_sdmmc1_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34),
+
+#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#else
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#endif
+
+ .io_init = rk29_sdmmc1_cfg_gpio,
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+ .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+
+ .dma_name = "sdio",
+#ifdef CONFIG_SDMMC1_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+
+#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ .status = rk29sdk_wifi_status,
+ .register_status_notify = rk29sdk_wifi_status_register,
+#endif
+#if 0
+ .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
+#endif
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC1_WRITE_PROTECT_PIN,
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+
+#else
+ .detect_irq = INVALID_GPIO,
+ .enable_sd_wakeup = 0,
+#endif
+
+};
+#endif //endif--#ifdef CONFIG_SDMMC1_RK29
+
+/**************************************************************************************************
+ * the end of setting for SDMMC devices
+**************************************************************************************************/
+
+#ifdef CONFIG_BATTERY_RK30_ADC
+static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = {
+ .dc_det_pin = RK30_PIN0_PB2,
+ .batt_low_pin = RK30_PIN0_PB1,
+ .charge_set_pin = INVALID_GPIO,
+ .charge_ok_pin = RK30_PIN0_PA6,
+ .dc_det_level = GPIO_LOW,
+ .charge_ok_level = GPIO_HIGH,
+};
+
+static struct platform_device rk30_device_adc_battery = {
+ .name = "rk30-battery",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk30_adc_battery_platdata,
+ },
+};
+#endif
+#ifdef CONFIG_RK30_PWM_REGULATOR
+const static int pwm_voltage_map[] = {
+ 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000
+};
+
+static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
+ {
+ .supply = "vdd_core",
+ }
+};
+
+struct regulator_init_data pwm_regulator_init_dcdc[1] =
+{
+ {
+ .constraints = {
+ .name = "PWM_DCDC1",
+ .min_uV = 600000,
+ .max_uV = 1800000, //0.6-1.8V
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
+ .consumer_supplies = pwm_dcdc1_consumers,
+ },
+};
+
+static struct pwm_platform_data pwm_regulator_info[1] = {
+ {
+ .pwm_id = 3,
+ .pwm_gpio = RK30_PIN3_PD6,
+ .pwm_iomux_name = GPIO3D6_PWM3_JTAGTMS_HOSTDRVVBUS_NAME,
+ .pwm_iomux_pwm = GPIO3D_PWM3,
+ .pwm_iomux_gpio = GPIO3D_GPIO3D6,
+ .pwm_voltage = 1000000,
+ .suspend_voltage = 1050000,
+ .min_uV = 1000000,
+ .max_uV = 1400000,
+ .coefficient = 455, //45.5%
+ .pwm_voltage_map = pwm_voltage_map,
+ .init_data = &pwm_regulator_init_dcdc[0],
+ },
+};
+
+struct platform_device pwm_regulator_device[1] = {
+ {
+ .name = "pwm-voltage-regulator",
+ .id = 0,
+ .dev = {
+ .platform_data = &pwm_regulator_info[0],
+ }
+ },
+};
+#endif
+
+#ifdef CONFIG_RK29_VMAC
+#define PHY_PWR_EN_GPIO RK30_PIN1_PD6
+#include "board-rk30-sdk-vmac.c"
+#endif
+
+#ifdef CONFIG_RFKILL_RK
+// bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c
+static struct rfkill_rk_platform_data rfkill_rk_platdata = {
+ .type = RFKILL_TYPE_BLUETOOTH,
+
+ .poweron_gpio = { // BT_REG_ON
+ .io = RK30_PIN3_PC7,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C7_SDMMC1WRITEPRT_RMIICRS_NAME,
+ .fgpio = GPIO3C_GPIO3C7,
+ },
+ },
+
+ .reset_gpio = { // BT_RST
+ .io = RK30_PIN3_PD1, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW,
+ .iomux = {
+ .name = GPIO3D1_SDMMC1BACKENDPWR_MIIMDCLK_NAME,
+ .fgpio = GPIO3D_GPIO3D1,
+ },
+ },
+
+ .wake_gpio = { // BT_WAKE, use to control bt's sleep and wakeup
+ .io = RK30_PIN3_PC6, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C6_SDMMC1DETECTN_RMIIRXERR_NAME,
+ .fgpio = GPIO3C_GPIO3C6,
+ },
+ },
+
+ .wake_host_irq = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep
+ .gpio = {
+ .io = RK30_PIN0_PA5, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW, // set GPIO_LOW for falling, set 0 for rising
+ .iomux = {
+ .name = NULL,
+ },
+ },
+ },
+
+ .rts_gpio = { // UART_RTS, enable or disable BT's data coming
+ .io = RK30_PIN1_PA3, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW,
+ .iomux = {
+ .name = GPIO1A3_UART0RTSN_NAME,
+ .fgpio = GPIO1A_GPIO1A3,
+ .fmux = GPIO1A_UART0RTSN,
+ },
+ },
+};
+
+static struct platform_device device_rfkill_rk = {
+ .name = "rfkill_rk",
+ .id = -1,
+ .dev = {
+ .platform_data = &rfkill_rk_platdata,
+ },
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+#ifdef CONFIG_FB_ROCKCHIP
+ &device_fb,
+#endif
+#if defined(CONFIG_LCDC0_RK31)
+ &device_lcdc0,
+#endif
+#if defined(CONFIG_LCDC1_RK31)
+ &device_lcdc1,
+#endif
+
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ &rk29_device_backlight,
+#endif
+
+#ifdef CONFIG_ION
+ &device_ion,
+#endif
+#ifdef CONFIG_ANDROID_TIMED_GPIO
+ &rk29_device_vibrator,
+#endif
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+ &rk29_device_gpio_leds,
+#endif
+#ifdef CONFIG_RK_IRDA
+ &irda_device,
+#endif
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ &rk29sdk_wifi_device,
+#endif
+#ifdef CONFIG_RK29_SUPPORT_MODEM
+ &rk30_device_modem,
+#endif
+#if defined(CONFIG_MU509)
+ &rk29_device_mu509,
+#endif
+#if defined(CONFIG_MW100)
+ &rk29_device_mw100,
+#endif
+#if defined(CONFIG_MT6229)
+ &rk29_device_mt6229,
+#endif
+#if defined(CONFIG_SEW868)
+ &rk30_device_sew868,
+#endif
+#ifdef CONFIG_BATTERY_RK30_ADC
+ &rk30_device_adc_battery,
+#endif
+#ifdef CONFIG_RFKILL_RK
+ &device_rfkill_rk,
+#endif
+};
+
+// i2c
+#ifdef CONFIG_I2C0_RK30
+static struct i2c_board_info __initdata i2c0_info[] = {
+#if defined (CONFIG_GS_MMA7660)
+ {
+ .type = "gs_mma7660",
+ .addr = 0x4c,
+ .flags = 0,
+ .irq = MMA7660_INT_PIN,
+ .platform_data = &mma7660_info,
+ },
+#endif
+#if defined (CONFIG_GS_MMA8452)
+ {
+ .type = "gs_mma8452",
+ .addr = 0x1d,
+ .flags = 0,
+ .irq = MMA8452_INT_PIN,
+ .platform_data = &mma8452_info,
+ },
+#endif
+#if defined (CONFIG_GS_LIS3DH)
+ {
+ .type = "gs_lis3dh",
+ .addr = 0x19, //0x19(SA0-->VCC), 0x18(SA0-->GND)
+ .flags = 0,
+ .irq = LIS3DH_INT_PIN,
+ .platform_data = &lis3dh_info,
+ },
+#endif
+#if defined (CONFIG_COMPASS_AK8975)
+ {
+ .type = "ak8975",
+ .addr = 0x0d,
+ .flags = 0,
+ .irq = RK30_PIN0_PD5,
+ .platform_data = &akm8975_info,
+ },
+#endif
+#if defined (CONFIG_GYRO_L3G4200D)
+ {
+ .type = "l3g4200d_gryo",
+ .addr = 0x69,
+ .flags = 0,
+ .irq = L3G4200D_INT_PIN,
+ .platform_data = &l3g4200d_info,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_RK1000)
+ {
+ .type = "rk1000_i2c_codec",
+ .addr = 0x60,
+ .flags = 0,
+ },
+ {
+ .type = "rk1000_control",
+ .addr = 0x40,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_RT5631)
+ {
+ .type = "rt5631",
+ .addr = 0x1a,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_ES8323)
+ {
+ .type = "es8323",
+ .addr = 0x10,
+ .flags = 0,
+ },
+#endif
+#ifdef CONFIG_MFD_RK610
+ {
+ .type = "rk610_ctl",
+ .addr = 0x40,
+ .flags = 0,
+ },
+#ifdef CONFIG_RK610_TVOUT
+ {
+ .type = "rk610_tvout",
+ .addr = 0x42,
+ .flags = 0,
+ },
+#endif
+#ifdef CONFIG_RK610_HDMI
+ {
+ .type = "rk610_hdmi",
+ .addr = 0x46,
+ .flags = 0,
+ .irq = RK29_PIN5_PA2,
+ },
+#endif
+#ifdef CONFIG_SND_SOC_RK610
+ {//RK610_CODEC addr from 0x60 to 0x80 (0x60~0x80)
+ .type = "rk610_i2c_codec",
+ .addr = 0x60,
+ .flags = 0,
+ },
+#endif
+#endif
+
+};
+#endif
+
+#define PMIC_TYPE_WM8326 1
+#define PMIC_TYPE_TPS65910 2
+int __sramdata g_pmic_type = 0;
+#ifdef CONFIG_I2C1_RK30
+#ifdef CONFIG_MFD_WM831X_I2C
+#include "board-rk3066b-sdk-wm8326.c"
+#endif
+#ifdef CONFIG_MFD_TPS65910
+#define TPS65910_HOST_IRQ RK30_PIN6_PA4
+#include "board-rk3066b-sdk-tps65910.c"
+#endif
+
+static struct i2c_board_info __initdata i2c1_info[] = {
+#if defined (CONFIG_MFD_WM831X_I2C)
+ {
+ .type = "wm8326",
+ .addr = 0x34,
+ .flags = 0,
+ .irq = RK30_PIN0_PB3,
+ .platform_data = &wm831x_platdata,
+ },
+#endif
+#if defined (CONFIG_MFD_TPS65910)
+ {
+ .type = "tps65910",
+ .addr = TPS65910_I2C_ID0,
+ .flags = 0,
+ .irq = TPS65910_HOST_IRQ,
+ .platform_data = &tps65910_data,
+ },
+#endif
+};
+#endif
+
+void __sramfunc board_pmu_suspend(void)
+{
+ #if defined (CONFIG_MFD_WM831X_I2C)
+ if(g_pmic_type == PMIC_TYPE_WM8326)
+ board_pmu_wm8326_suspend();
+ #endif
+ #if defined (CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ board_pmu_tps65910_suspend();
+ #endif
+}
+
+void __sramfunc board_pmu_resume(void)
+{
+ #if defined (CONFIG_MFD_WM831X_I2C)
+ if(g_pmic_type == PMIC_TYPE_WM8326)
+ board_pmu_wm8326_resume();
+ #endif
+ #if defined (CONFIG_MFD_TPS65910)
+ if(g_pmic_type == PMIC_TYPE_TPS65910)
+ board_pmu_tps65910_resume();
+ #endif
+}
+
+ int __sramdata gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
+
+void __sramfunc rk30_pwm_logic_suspend_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+
+// int gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
+ sram_udelay(10000);
+ gpio0d7_iomux = readl_relaxed(GRF_GPIO0D_IOMUX);
+ gpio0d7_do = grf_readl(GRF_GPIO0H_DO);
+ gpio0d7_dir = grf_readl(GRF_GPIO0H_DIR);
+ gpio0d7_en = grf_readl(GRF_GPIO0H_EN);
+
+ writel_relaxed((1<<30), GRF_GPIO0D_IOMUX);
+ grf_writel((1<<31)|(1<<15), GRF_GPIO0H_DIR);
+ grf_writel((1<<31)|(1<<15), GRF_GPIO0H_DO);
+ grf_writel((1<<31)|(1<<15), GRF_GPIO0H_EN);
+#endif
+}
+void __sramfunc rk30_pwm_logic_resume_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ writel_relaxed((1<<30)|gpio0d7_iomux, GRF_GPIO0D_IOMUX);
+ grf_writel((1<<31)|gpio0d7_en, GRF_GPIO0H_EN);
+ grf_writel((1<<31)|gpio0d7_dir, GRF_GPIO0H_DIR);
+ grf_writel((1<<31)|gpio0d7_do, GRF_GPIO0H_DO);
+ sram_udelay(10000);
+
+#endif
+
+}
+extern void pwm_suspend_voltage(void);
+extern void pwm_resume_voltage(void);
+void rk30_pwm_suspend_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_suspend_voltage();
+#endif
+}
+void rk30_pwm_resume_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_resume_voltage();
+#endif
+}
+
+
+#ifdef CONFIG_I2C2_RK30
+static struct i2c_board_info __initdata i2c2_info[] = {
+#if defined (CONFIG_TOUCHSCREEN_GT8XX)
+ {
+ .type = "Goodix-TS",
+ .addr = 0x55,
+ .flags = 0,
+ .irq = RK30_PIN0_PD4,
+ .platform_data = &goodix_info,
+ },
+#endif
+#if defined (CONFIG_TOUCHSCREEN_FT5306)
+ {
+ .type = "ft5x0x_ts",
+ .addr = 0x38,
+ .flags = 0,
+ .irq = RK30_PIN0_PD4,
+ .platform_data = &ft5x0x_info,
+ },
+#endif
+#if defined (CONFIG_LS_CM3217)
+ {
+ .type = "lightsensor",
+ .addr = 0x10,
+ .flags = 0,
+ .platform_data = &cm3217_info,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C3_RK30
+static struct i2c_board_info __initdata i2c3_info[] = {
+};
+#endif
+
+#ifdef CONFIG_I2C4_RK30
+static struct i2c_board_info __initdata i2c4_info[] = {
+};
+#endif
+
+#ifdef CONFIG_I2C_GPIO_RK30
+#define I2C_SDA_PIN INVALID_GPIO// RK30_PIN2_PD6 //set sda_pin here
+#define I2C_SCL_PIN INVALID_GPIO//RK30_PIN2_PD7 //set scl_pin here
+static int rk30_i2c_io_init(void)
+{
+ //set iomux (gpio) here
+ //rk30_mux_api_set(GPIO2D7_I2C1SCL_NAME, GPIO2D_GPIO2D7);
+ //rk30_mux_api_set(GPIO2D6_I2C1SDA_NAME, GPIO2D_GPIO2D6);
+
+ return 0;
+}
+struct i2c_gpio_platform_data default_i2c_gpio_data = {
+ .sda_pin = I2C_SDA_PIN,
+ .scl_pin = I2C_SCL_PIN,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(100),
+ .bus_num = 5,
+ .io_init = rk30_i2c_io_init,
+};
+static struct i2c_board_info __initdata i2c_gpio_info[] = {
+};
+#endif
+
+static void __init rk30_i2c_register_board_info(void)
+{
+#ifdef CONFIG_I2C0_RK30
+ i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
+#endif
+#ifdef CONFIG_I2C1_RK30
+ i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
+#endif
+#ifdef CONFIG_I2C2_RK30
+ i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
+#endif
+#ifdef CONFIG_I2C3_RK30
+ i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
+#endif
+#ifdef CONFIG_I2C4_RK30
+ i2c_register_board_info(4, i2c4_info, ARRAY_SIZE(i2c4_info));
+#endif
+#ifdef CONFIG_I2C_GPIO_RK30
+ i2c_register_board_info(5, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
+#endif
+}
+//end of i2c
+
+#define POWER_ON_PIN RK30_PIN0_PA0 //power_hold
+static void rk30_pm_power_off(void)
+{
+ printk(KERN_ERR "rk30_pm_power_off start...\n");
+ gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
+#if defined(CONFIG_MFD_WM831X)
+ wm831x_set_bits(Wm831x,WM831X_GPIO_LEVEL,0x0001,0x0000); //set sys_pwr 0
+ wm831x_device_shutdown(Wm831x);//wm8326 shutdown
+#endif
+ while (1);
+}
+
+static void __init machine_rk30_board_init(void)
+{
+ //avs_init();
+ gpio_request(POWER_ON_PIN, "poweronpin");
+ gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
+
+ pm_power_off = rk30_pm_power_off;
+
+ rk30_i2c_register_board_info();
+ spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ board_usb_detect_init(RK30_PIN0_PA7);
+
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ rk29sdk_wifi_bt_gpio_control_init();
+#endif
+}
+
+static void __init rk30_reserve(void)
+{
+#ifdef CONFIG_ION
+ rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
+#endif
+#ifdef CONFIG_FB_ROCKCHIP
+ resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE);
+ resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1;
+ #if 0
+ resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
+ resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
+ resource_fb[2].start = board_mem_reserve_add("fb2", RK30_FB0_MEM_SIZE);
+ resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1;
+ #endif
+#endif
+#ifdef CONFIG_VIDEO_RK29
+ rk30_camera_request_reserve_mem();
+#endif
+ board_mem_reserved();
+}
+
+/**
+ * dvfs_cpu_logic_table: table for arm and logic dvfs
+ * @frequency : arm frequency
+ * @cpu_volt : arm voltage depend on frequency
+ * @logic_volt : logic voltage arm requests depend on frequency
+ * comments : min arm/logic voltage
+ */
+static struct dvfs_arm_table dvfs_cpu_logic_table[] = {
+#if 0
+ {.frequency = 252 * 1000, .cpu_volt = 1075 * 1000, .logic_volt = 1125 * 1000},//0.975V/1.000V
+#endif
+ {.frequency = 504 * 1000, .cpu_volt = 975 * 1000, .logic_volt = 1000 * 1000},//0.975V/1.000V
+ {.frequency = 816 * 1000, .cpu_volt = 1000 * 1000, .logic_volt = 1000 * 1000},//1.000V/1.025V
+ {.frequency = 1200 * 1000, .cpu_volt = 1025 * 1000, .logic_volt = 1000 * 1000},//1.100V/1.050V
+#if 0
+ {.frequency = 1008 * 1000, .cpu_volt = 1125 * 1000, .logic_volt = 1150 * 1000},//1.025V/1.050V
+ {.frequency = 1272 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000},//1.150V/1.100V
+ {.frequency = 1416 * 1000, .cpu_volt = 1300 * 1000, .logic_volt = 1200 * 1000},//1.225V/1.100V
+ {.frequency = 1512 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1250 * 1000},//1.300V/1.150V
+ {.frequency = 1608 * 1000, .cpu_volt = 1425 * 1000, .logic_volt = 1300 * 1000},//1.325V/1.175V
+#endif
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_gpu_table[] = {
+ {.frequency = 266 * 1000, .index = 1000 * 1000},
+ {.frequency = 400 * 1000, .index = 1000 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_ddr_table[] = {
+ {.frequency = 300 * 1000, .index = 1000 * 1000},
+ {.frequency = 400 * 1000, .index = 1000 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+#define DVFS_CPU_TABLE_SIZE (ARRAY_SIZE(dvfs_cpu_logic_table))
+static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE];
+static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE];
+
+void __init board_clock_init(void)
+{
+ rk30_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
+ dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
+}
+
+MACHINE_START(RK30, "RK30board")
+ .boot_params = PLAT_PHYS_OFFSET + 0x800,
+ .fixup = rk30_fixup,
+ .reserve = &rk30_reserve,
+ .map_io = rk30_map_io,
+ .init_irq = rk30_init_irq,
+ .timer = &rk30_timer,
+ .init_machine = machine_rk30_board_init,
+MACHINE_END
projects / firefly-linux-kernel-4.4.55.git / commitdiff