rk3168m: add board-rk3168m-tb.c

diff --git a/arch/arm/configs/rk3168m_tb_defconfig b/arch/arm/configs/rk3168m_tb_defconfig
new file mode 100644 (file)
index 0000000..e80298f
--- /dev/null
+++ b/arch/arm/configs/rk3168m_tb_defconfig
@@ -0,0 +1,3112 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 3.0.36 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_FIQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_KERNEL_LZO=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_BOOST is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_BLK_CGROUP is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_PANIC_TIMEOUT=1
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_ASHMEM=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_RK29 is not set
+# CONFIG_ARCH_RK2928 is not set
+CONFIG_ARCH_RK30=y
+# CONFIG_ARCH_RK3188 is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_DDR_TYPE_DDRII is not set
+# CONFIG_DDR_TYPE_LPDDR is not set
+# CONFIG_DDR_TYPE_DDR3_800D is not set
+# CONFIG_DDR_TYPE_DDR3_800E is not set
+# CONFIG_DDR_TYPE_DDR3_1066E is not set
+# CONFIG_DDR_TYPE_DDR3_1066F is not set
+# CONFIG_DDR_TYPE_DDR3_1066G is not set
+# CONFIG_DDR_TYPE_DDR3_1333F is not set
+# CONFIG_DDR_TYPE_DDR3_1333G is not set
+# CONFIG_DDR_TYPE_DDR3_1333H is not set
+# CONFIG_DDR_TYPE_DDR3_1333J is not set
+# CONFIG_DDR_TYPE_DDR3_1600G is not set
+# CONFIG_DDR_TYPE_DDR3_1600H is not set
+# CONFIG_DDR_TYPE_DDR3_1600J is not set
+# CONFIG_DDR_TYPE_DDR3_1600K is not set
+# CONFIG_DDR_TYPE_DDR3_1866J is not set
+# CONFIG_DDR_TYPE_DDR3_1866K is not set
+# CONFIG_DDR_TYPE_DDR3_1866L is not set
+# CONFIG_DDR_TYPE_DDR3_1866M is not set
+# CONFIG_DDR_TYPE_DDR3_2133K is not set
+# CONFIG_DDR_TYPE_DDR3_2133L is not set
+# CONFIG_DDR_TYPE_DDR3_2133M is not set
+# CONFIG_DDR_TYPE_DDR3_2133N is not set
+CONFIG_DDR_TYPE_DDR3_DEFAULT=y
+# CONFIG_DDR_INIT_CHANGE_FREQ is not set
+CONFIG_DDR_FREQ=y
+# CONFIG_DDR_TEST is not set
+CONFIG_DVFS=y
+# CONFIG_RK_CLOCK_PROC is not set
+
+#
+# Support for RK power manage
+#
+# CONFIG_CLK_SWITCH_TO_32K is not set
+# CONFIG_RK30_I2C_INSRAM is not set
+# CONFIG_WIFI_CONTROL_FUNC is not set
+CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC=y
+CONFIG_RK29_VPU=m
+CONFIG_RK29_LAST_LOG=y
+CONFIG_RK_EARLY_PRINTK=y
+CONFIG_RK_DEBUG_UART=2
+CONFIG_RK_CONSOLE_THREAD=y
+# CONFIG_RK_SRAM_DMA is not set
+CONFIG_RK_PL330_DMA=y
+# CONFIG_RK_PL330_DMA_TEST is not set
+CONFIG_ARCH_RK3066B=y
+# CONFIG_SOC_RK3000 is not set
+# CONFIG_SOC_RK3066 is not set
+# CONFIG_SOC_RK3068 is not set
+# CONFIG_SOC_RK3066B is not set
+# CONFIG_SOC_RK3108 is not set
+# CONFIG_SOC_RK3168 is not set
+CONFIG_SOC_RK3168M=y
+CONFIG_MACH_RK3168M_TB=y
+
+#
+# System MMU
+#
+CONFIG_PLAT_RK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_SWP_EMULATE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_PL310=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_ARM_ERRATA_742230 is not set
+# CONFIG_ARM_ERRATA_742231 is not set
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_ARM_ERRATA_720789 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_ARM_ERRATA_743622 is not set
+# CONFIG_ARM_ERRATA_751472 is not set
+# CONFIG_ARM_ERRATA_753970 is not set
+CONFIG_ARM_ERRATA_754322=y
+# CONFIG_ARM_ERRATA_754327 is not set
+CONFIG_ARM_ERRATA_764369=y
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_GIC=y
+CONFIG_PL330=y
+CONFIG_FIQ_GLUE=y
+CONFIG_FIQ_DEBUGGER=y
+CONFIG_FIQ_DEBUGGER_NO_SLEEP=y
+# CONFIG_FIQ_DEBUGGER_WAKEUP_IRQ_ALWAYS_ON is not set
+CONFIG_FIQ_DEBUGGER_CONSOLE=y
+CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HAVE_SMP=y
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+# CONFIG_CLEANCACHE is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+# CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART is not set
+
+#
+# Boot options
+#
+# CONFIG_USE_OF is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HAS_WAKELOCK=y
+CONFIG_HAS_EARLYSUSPEND=y
+CONFIG_WAKELOCK=y
+CONFIG_WAKELOCK_STAT=y
+CONFIG_USER_WAKELOCK=y
+CONFIG_EARLYSUSPEND=y
+# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set
+# CONFIG_CONSOLE_EARLYSUSPEND is not set
+CONFIG_FB_EARLYSUSPEND=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_CAN_PM_TRACE=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME_CLK=y
+CONFIG_CPU_PM=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_SUSPEND_SYNC_WORKQUEUE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_FIB_TRIE_STATS is not set
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+CONFIG_INET_ESP=y
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+# CONFIG_IPV6_SUBTREES is not set
+# CONFIG_IPV6_MROUTE is not set
+CONFIG_ANDROID_PARANOID_NETWORK=y
+CONFIG_NET_ACTIVITY_STATS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=y
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_GRE=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
+CONFIG_NF_CONNTRACK_AMANDA=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_H323=y
+CONFIG_NF_CONNTRACK_IRC=y
+CONFIG_NF_CONNTRACK_BROADCAST=y
+CONFIG_NF_CONNTRACK_NETBIOS_NS=y
+# CONFIG_NF_CONNTRACK_SNMP is not set
+CONFIG_NF_CONNTRACK_PPTP=y
+CONFIG_NF_CONNTRACK_SANE=y
+CONFIG_NF_CONNTRACK_SIP=y
+CONFIG_NF_CONNTRACK_TFTP=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_TPROXY=y
+CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=y
+CONFIG_NETFILTER_XT_CONNMARK=y
+
+#
+# Xtables targets
+#
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_TARGET_NFLOG=y
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+CONFIG_NETFILTER_XT_TARGET_TPROXY=y
+CONFIG_NETFILTER_XT_TARGET_TRACE=y
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_HELPER=y
+CONFIG_NETFILTER_XT_MATCH_HL=y
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LENGTH=y
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=y
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
+CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_SOCKET=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
+CONFIG_NETFILTER_XT_MATCH_STRING=y
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=y
+CONFIG_NETFILTER_XT_MATCH_U32=y
+# CONFIG_IP_SET is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP_NF_TARGET_LOG=y
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_NF_NAT_PROTO_DCCP=y
+CONFIG_NF_NAT_PROTO_GRE=y
+CONFIG_NF_NAT_PROTO_UDPLITE=y
+CONFIG_NF_NAT_PROTO_SCTP=y
+CONFIG_NF_NAT_FTP=y
+CONFIG_NF_NAT_IRC=y
+CONFIG_NF_NAT_TFTP=y
+CONFIG_NF_NAT_AMANDA=y
+CONFIG_NF_NAT_PPTP=y
+CONFIG_NF_NAT_H323=y
+CONFIG_NF_NAT_SIP=y
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV6=y
+CONFIG_NF_CONNTRACK_IPV6=y
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=y
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP6_NF_MANGLE=y
+CONFIG_IP6_NF_RAW=y
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_PHONET=y
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+CONFIG_NET_SCH_HTB=y
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_CHOKE is not set
+# CONFIG_NET_SCH_QFQ is not set
+CONFIG_NET_SCH_INGRESS=y
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_U32=y
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_U32=y
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_TEXT is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=y
+# CONFIG_GACT_PROB is not set
+CONFIG_NET_ACT_MIRRED=y
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+# CONFIG_NET_ACT_CSUM is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_CFG80211_ALLOW_RECONNECT is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_PM=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RFKILL_GPIO is not set
+# CONFIG_RFKILL_RESET is not set
+# CONFIG_RFKILL_RK is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_SYNC=y
+CONFIG_SW_SYNC=y
+CONFIG_SW_SYNC_USER=y
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_RKNAND=y
+CONFIG_MTD_NAND_RK29XX=y
+CONFIG_MTD_RKNAND_BUFFER=y
+# CONFIG_MTD_EMMC_CLK_POWER_SAVE is not set
+# CONFIG_MTD_NAND_RK29XX_DEBUG is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_INTEL_MID_PTI is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_SENSORS_AK8975 is not set
+# CONFIG_SENSORS_AK8963 is not set
+# CONFIG_DS1682 is not set
+CONFIG_UID_STAT=y
+# CONFIG_BMP085 is not set
+# CONFIG_WL127X_RFKILL is not set
+CONFIG_APANIC=y
+CONFIG_APANIC_PLABEL="kpanic"
+# CONFIG_MTK23D is not set
+# CONFIG_FM580X is not set
+# CONFIG_RK29_SC8800 is not set
+# CONFIG_TDSC8800 is not set
+# CONFIG_MODEM_SOUND is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_RK29_SUPPORT_MODEM is not set
+# CONFIG_GPS_DEVICES is not set
+# CONFIG_MPU_SENSORS_TIMERIRQ is not set
+# CONFIG_INV_SENSORS is not set
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_3G_MODULE is not set
+# CONFIG_BP_AUTO is not set
+# CONFIG_RK2928_CALLPAD_MISC is not set
+# CONFIG_AUDIO_SWITCH is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=y
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_RAID is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_DM_FLAKEY is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_80211=y
+# CONFIG_WIFI_NONE is not set
+# CONFIG_BCM4329 is not set
+# CONFIG_BCM4319 is not set
+CONFIG_MT6620=y
+# CONFIG_RDA5990 is not set
+# CONFIG_MV8686 is not set
+# CONFIG_MT5931 is not set
+# CONFIG_MT5931_MT6622 is not set
+# CONFIG_RTL8192CU is not set
+# CONFIG_RTL8188EU is not set
+# CONFIG_RT5370 is not set
+# CONFIG_AR6003 is not set
+# CONFIG_RKWIFI is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_NCM=y
+# CONFIG_USB_NET_DM9601 is not set
+CONFIG_USB_NET_DM9620=y
+CONFIG_USB_NET_SR9700=y
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_CDC_PHONET is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_VL600 is not set
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=y
+# CONFIG_PPPOE is not set
+CONFIG_PPPOLAC=y
+CONFIG_PPPOPNS=y
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_KEYRESET=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYS_RK29=y
+# CONFIG_SYNAPTICS_SO340010 is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_WM831X_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_AS5011 is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+CONFIG_JOYSTICK_XPAD=y
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=y
+CONFIG_TABLET_USB_AIPTEK=y
+CONFIG_TABLET_USB_GTCO=y
+CONFIG_TABLET_USB_HANWANG=y
+CONFIG_TABLET_USB_KBTAB=y
+CONFIG_TABLET_USB_WACOM=y
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_CT36X_TS is not set
+# CONFIG_TOUCHSCREEN_GSLX680 is not set
+# CONFIG_TOUCHSCREEN_ILI2102_IIC is not set
+CONFIG_TOUCHSCREEN_GT8XX=y
+CONFIG_TOUCH_MAX_X=1280
+CONFIG_TOUCH_MAX_Y=800
+# CONFIG_TOUCHSCREEN_CT36X is not set
+# CONFIG_TOUCHSCREEN_IT7250 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MAX11801 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM831X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_EETI_EGALAX is not set
+# CONFIG_TOUCHSCREEN_GT811_IIC is not set
+# CONFIG_TOUCHSCREEN_86V_GT811_IIC is not set
+# CONFIG_TOUCHSCREEN_GT82X_IIC is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_RK is not set
+# CONFIG_TOUCHSCREEN_GT8110 is not set
+# CONFIG_TOUCHSCREEN_CT360_IIC is not set
+# CONFIG_TOUCHSCREEN_FT5306 is not set
+# CONFIG_TOUCHSCREEN_I30 is not set
+# CONFIG_TOUCHSCREEN_BYD693X is not set
+# CONFIG_TOUCHSCREEN_SITRONIX_A720 is not set
+# CONFIG_TOUCHSCREEN_FT5306_WPX2 is not set
+# CONFIG_TOUCHSCREEN_FT5306_AV is not set
+# CONFIG_TOUCHSCREEN_FT5X0X is not set
+# CONFIG_ATMEL_MXT1386 is not set
+# CONFIG_TS_AUTO is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_LPSENSOR_ISL29028 is not set
+# CONFIG_INPUT_LPSENSOR_CM3602 is not set
+# CONFIG_INPUT_LPSENSOR_AL3006 is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+CONFIG_INPUT_KEYCHORD=y
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_RK_BOARD_ID is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_WM831X_ON is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_MAG_SENSORS is not set
+CONFIG_COMPASS_AK8975=y
+# CONFIG_COMPASS_MMC328X is not set
+# CONFIG_G_SENSOR_DEVICE is not set
+# CONFIG_GS_MMA7660 is not set
+CONFIG_GS_MMA8452=y
+CONFIG_GS_LIS3DH=y
+# CONFIG_GS_BMA023 is not set
+# CONFIG_GYRO_SENSOR_DEVICE is not set
+CONFIG_GYRO_L3G4200D=y
+# CONFIG_INPUT_JOGBALL is not set
+# CONFIG_LIGHT_SENSOR_DEVICE is not set
+CONFIG_LS_CM3217=y
+
+#
+# handle all sensors
+#
+CONFIG_SENSOR_DEVICE=y
+CONFIG_GSENSOR_DEVICE=y
+CONFIG_GS_KXTIK=y
+# CONFIG_GS_MXC6225 is not set
+CONFIG_COMPASS_DEVICE=y
+CONFIG_GYROSCOPE_DEVICE=y
+# CONFIG_GYRO_K3G is not set
+CONFIG_LIGHT_DEVICE=y
+# CONFIG_LS_CM3232 is not set
+CONFIG_LS_AL3006=y
+CONFIG_LS_STK3171=y
+# CONFIG_LS_ISL29023 is not set
+# CONFIG_LS_AP321XX is not set
+# CONFIG_LS_PHOTORESISTOR is not set
+CONFIG_PROXIMITY_DEVICE=y
+CONFIG_PS_AL3006=y
+CONFIG_PS_STK3171=y
+# CONFIG_PS_AP321XX is not set
+# CONFIG_TEMPERATURE_DEVICE is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_SERIAL_RK29=y
+CONFIG_UART0_RK29=y
+# CONFIG_UART0_CTS_RTS_RK29 is not set
+CONFIG_UART0_DMA_RK29=2
+# CONFIG_UART1_RK29 is not set
+# CONFIG_UART2_RK29 is not set
+CONFIG_UART3_RK29=y
+CONFIG_UART3_CTS_RTS_RK29=y
+CONFIG_UART3_DMA_RK29=0
+# CONFIG_SERIAL_RK29_CONSOLE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_DCC_TTY is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_RK30=y
+
+#
+# Now, there are five selectable I2C channels.
+#
+CONFIG_I2C0_RK30=y
+# CONFIG_I2C0_CONTROLLER_RK29 is not set
+CONFIG_I2C0_CONTROLLER_RK30=y
+CONFIG_I2C1_RK30=y
+# CONFIG_I2C1_CONTROLLER_RK29 is not set
+CONFIG_I2C1_CONTROLLER_RK30=y
+CONFIG_I2C2_RK30=y
+# CONFIG_I2C2_CONTROLLER_RK29 is not set
+CONFIG_I2C2_CONTROLLER_RK30=y
+CONFIG_I2C3_RK30=y
+# CONFIG_I2C3_CONTROLLER_RK29 is not set
+CONFIG_I2C3_CONTROLLER_RK30=y
+CONFIG_I2C4_RK30=y
+# CONFIG_I2C4_CONTROLLER_RK29 is not set
+CONFIG_I2C4_CONTROLLER_RK30=y
+# CONFIG_I2C_GPIO_RK30 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+CONFIG_ADC=y
+# CONFIG_ADC_NULL is not set
+CONFIG_ADC_RK30=y
+
+#
+# Headset device support
+#
+# CONFIG_RK_HEADSET_DET is not set
+# CONFIG_RK_HEADSET_IRQ_HOOK_ADC_DET is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+CONFIG_GPIO_WM831X=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_PCA9554 is not set
+# CONFIG_IOEXTEND_TCA6424 is not set
+CONFIG_EXPANDED_GPIO_NUM=0
+CONFIG_EXPANDED_GPIO_IRQ_NUM=0
+# CONFIG_EXPAND_GPIO_SOFT_INTERRUPT is not set
+CONFIG_SPI_FPGA_GPIO_NUM=0
+CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0
+
+#
+# MODULbus GPIO expanders:
+#
+CONFIG_GPIO_TPS65910=y
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_WM831X_BACKUP is not set
+# CONFIG_WM831X_POWER is not set
+CONFIG_TEST_POWER=y
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_BATTERY_RK30_ADC is not set
+# CONFIG_BATTERY_RK30_ADC_FAC is not set
+# CONFIG_POWER_ON_CHARGER_DISPLAY is not set
+# CONFIG_WM8326_VBAT_LOW_DETECTION is not set
+# CONFIG_TWL60xx_VBAT_LOW_DETECTION is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+CONFIG_MFD_SUPPORT=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS6586X is not set
+CONFIG_MFD_TPS65910=y
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_AIC3262_CODEC is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM831X=y
+CONFIG_MFD_WM831X_I2C=y
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_WL1273_CORE is not set
+CONFIG_MFD_TPS65090=y
+# CONFIG_MFD_RK610 is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_WM831X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_RK2818_REGULATOR_CHARGE is not set
+# CONFIG_RK2818_REGULATOR_LP8725 is not set
+# CONFIG_REGULATOR_ACT8891 is not set
+# CONFIG_REGULATOR_ACT8931 is not set
+CONFIG_REGULATOR_ACT8846=y
+# CONFIG_ACT8846_SUPPORT_RESET is not set
+# CONFIG_RK29_PWM_REGULATOR is not set
+CONFIG_RK30_PWM_REGULATOR=y
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_RC_CORE=y
+CONFIG_LIRC=y
+CONFIG_RC_MAP=y
+CONFIG_IR_NEC_DECODER=y
+CONFIG_IR_RC5_DECODER=y
+CONFIG_IR_RC6_DECODER=y
+CONFIG_IR_JVC_DECODER=y
+CONFIG_IR_SONY_DECODER=y
+CONFIG_IR_RC5_SZ_DECODER=y
+CONFIG_IR_LIRC_CODEC=y
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_REDRAT3 is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+
+#
+# Customize TV tuners
+#
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_MEDIA_TUNER_TDA18218=m
+CONFIG_MEDIA_TUNER_TDA18212=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Miscelaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_IMX074 is not set
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9M112 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T111 is not set
+# CONFIG_SOC_CAMERA_MT9P111 is not set
+# CONFIG_SOC_CAMERA_MT9D112 is not set
+# CONFIG_SOC_CAMERA_MT9D113 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV2640 is not set
+# CONFIG_SOC_CAMERA_OV6650 is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV7675 is not set
+# CONFIG_SOC_CAMERA_OV2655 is not set
+CONFIG_SOC_CAMERA_OV2659=y
+# CONFIG_OV2659_USER_DEFINED_SERIES is not set
+# CONFIG_SOC_CAMERA_OV7690 is not set
+# CONFIG_SOC_CAMERA_OV9650 is not set
+# CONFIG_SOC_CAMERA_OV2640_RK is not set
+# CONFIG_SOC_CAMERA_OV3640 is not set
+# CONFIG_SOC_CAMERA_OV3660 is not set
+CONFIG_SOC_CAMERA_OV5642=y
+# CONFIG_OV5642_USER_DEFINED_SERIES is not set
+# CONFIG_SOC_CAMERA_OV5642_INTERPOLATION is not set
+CONFIG_OV5642_AUTOFOCUS=y
+# CONFIG_OV5642_FIXEDFOCUS is not set
+# CONFIG_SOC_CAMERA_OV5640 is not set
+# CONFIG_SOC_CAMERA_OV5640_FOR_TD8801 is not set
+# CONFIG_SOC_CAMERA_S5K6AA is not set
+# CONFIG_SOC_CAMERA_GT2005 is not set
+# CONFIG_SOC_CAMERA_GC0307 is not set
+# CONFIG_SOC_CAMERA_GC0308 is not set
+# CONFIG_SOC_CAMERA_GC0309 is not set
+# CONFIG_SOC_CAMERA_GC0309_FOR_TD8801 is not set
+# CONFIG_SOC_CAMERA_GC2015 is not set
+# CONFIG_SOC_CAMERA_GC2035 is not set
+# CONFIG_SOC_CAMERA_HI253 is not set
+# CONFIG_SOC_CAMERA_HI704 is not set
+# CONFIG_SOC_CAMERA_SIV120B is not set
+# CONFIG_SOC_CAMERA_SIV121D is not set
+# CONFIG_SOC_CAMERA_SID130B is not set
+# CONFIG_SOC_CAMERA_NT99250 is not set
+# CONFIG_SOC_CAMERA_GC0329 is not set
+# CONFIG_SOC_CAMERA_S5K5CA is not set
+# CONFIG_SOC_CAMERA_SP0838 is not set
+# CONFIG_SOC_CAMERA_SP2518 is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+# CONFIG_SOC_CAMERA_OV9740 is not set
+# CONFIG_SOC_CAMERA_MV9335 is not set
+# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_VIDEO_RK29=y
+CONFIG_VIDEO_RKCIF_WORK_ONEFRAME=y
+# CONFIG_VIDEO_RKCIF_WORK_PINGPONG is not set
+CONFIG_VIDEO_RK29_WORK_IPP=y
+# CONFIG_VIDEO_RK29_WORK_NOT_IPP is not set
+CONFIG_VIDEO_RK29_DIGITALZOOM_IPP_ON=y
+# CONFIG_VIDEO_RK29_DIGITALZOOM_IPP_OFF is not set
+# CONFIG_VIDEO_RK29_CAMMEM_PMEM is not set
+CONFIG_VIDEO_RK29_CAMMEM_ION=y
+# CONFIG_VIDEO_RKCIF_WORK_SIMUL_ON is not set
+CONFIG_VIDEO_RKCIF_WORK_SIMUL_OFF=y
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_WL1273 is not set
+
+#
+# Texas Instruments WL128x FM driver (ST based)
+#
+# CONFIG_RADIO_WL128X is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+CONFIG_ION=y
+CONFIG_ION_ROCKCHIP=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_RK29 is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_WM831X is not set
+CONFIG_BACKLIGHT_RK29_BL=y
+# CONFIG_BACKLIGHT_AW9364 is not set
+# CONFIG_BUTTON_LIGHT is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+# CONFIG_LCD_NULL is not set
+# CONFIG_LCD_LG_LP097X02 is not set
+# CONFIG_LCD_TD043MGEA1 is not set
+# CONFIG_LCD_HX8357 is not set
+# CONFIG_LCD_TJ048NC01CA is not set
+# CONFIG_LCD_HL070VM4AU is not set
+# CONFIG_LCD_HSD070IDW1 is not set
+# CONFIG_LCD_RGB_TFT480800_25_E is not set
+# CONFIG_LCD_HSD100PXN is not set
+# CONFIG_LCD_HSD07PFW1 is not set
+# CONFIG_LCD_BYD8688FTGF is not set
+# CONFIG_LCD_B101AW06 is not set
+# CONFIG_LCD_LS035Y8DX02A is not set
+# CONFIG_LCD_LS035Y8DX04A is not set
+# CONFIG_LCD_HSD100PXN_FOR_TDW851 is not set
+# CONFIG_LCD_CPTCLAA038LA31XE is not set
+# CONFIG_LCD_A060SE02 is not set
+# CONFIG_LCD_S1D13521 is not set
+# CONFIG_LCD_NT35582 is not set
+# CONFIG_LCD_NT35580 is not set
+# CONFIG_LCD_IPS1P5680_V1_E is not set
+# CONFIG_LCD_MCU_TFT480800_25_E is not set
+# CONFIG_LCD_NT35510 is not set
+# CONFIG_LCD_ILI9803_CPT4_3 is not set
+# CONFIG_LCD_AT070TNA2 is not set
+# CONFIG_LCD_AT070TN93 is not set
+# CONFIG_LCD_TX23D88VM is not set
+# CONFIG_LCD_A050VL01 is not set
+CONFIG_LCD_B101EW05=y
+# CONFIG_LCD_HJ050NA_06A is not set
+# CONFIG_LCD_HV070WSA100 is not set
+# CONFIG_LCD_COMMON is not set
+# CONFIG_LCD_RK2928_A720 is not set
+# CONFIG_LCD_RK2926_V86 is not set
+# CONFIG_LCD_RK3168_86V is not set
+# CONFIG_LCD_HJ080NA is not set
+# CONFIG_LCD_HJ101NA is not set
+# CONFIG_LCD_AUTO is not set
+# CONFIG_LCD_I30_800X480 is not set
+# CONFIG_LCD_TL5001_MIPI is not set
+# CONFIG_LCD_LP097QX1 is not set
+# CONFIG_LCD_DS1006H is not set
+CONFIG_NO_TRSM=y
+# CONFIG_DP_ANX6345 is not set
+# CONFIG_DP501 is not set
+# CONFIG_MIPI_DSI is not set
+
+#
+# HDMI
+#
+# CONFIG_HDMI is not set
+CONFIG_FB_ROCKCHIP=y
+# CONFIG_FB_MIRRORING is not set
+# CONFIG_DUAL_LCDC_DUAL_DISP_IN_KERNEL is not set
+CONFIG_ONE_LCDC_DUAL_OUTPUT_INF=y
+# CONFIG_NO_DUAL_DISP is not set
+# CONFIG_FB_ROTATE is not set
+CONFIG_THREE_FB_BUFFER=y
+# CONFIG_LCDC_RK30 is not set
+CONFIG_LCDC_RK3066B=y
+CONFIG_LCDC0_RK3066B=y
+# CONFIG_RK3066B_LCDC0_IO_18V is not set
+# CONFIG_LCDC1_RK3066B is not set
+# CONFIG_RK_HDMI is not set
+
+#
+# RGA
+#
+CONFIG_RGA_RK30=y
+# CONFIG_RK_LVDS is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_PIPO_CLUT224 is not set
+# CONFIG_LOGO_CHARGER_CLUT224 is not set
+# CONFIG_LOGO_G3_CLUT224 is not set
+# CONFIG_LOGO_LINUX_800x480_CLUT224 is not set
+# CONFIG_LOGO_LINUX_BMP is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_RK29_SOC=y
+CONFIG_SND_RK29_SOC_I2S=y
+CONFIG_SND_RK29_SOC_I2S_2CH=y
+# CONFIG_SND_I2S_DMA_EVENT_DYNAMIC is not set
+CONFIG_SND_I2S_DMA_EVENT_STATIC=y
+# CONFIG_SND_RK29_SOC_SPDIF is not set
+# CONFIG_SND_RK29_SOC_WM8988 is not set
+# CONFIG_SND_RK29_SOC_WM8900 is not set
+# CONFIG_SND_RK29_SOC_RT5621 is not set
+# CONFIG_SND_RK29_SOC_RT5623 is not set
+CONFIG_SND_RK29_SOC_RT5631=y
+# CONFIG_SND_RK29_SOC_RT5631_PHONE is not set
+# CONFIG_SND_RK29_SOC_RT5625 is not set
+# CONFIG_SND_RK29_SOC_RT3224 is not set
+# CONFIG_SND_RK29_SOC_RT3261 is not set
+# CONFIG_SND_RK29_SOC_CS42L52 is not set
+# CONFIG_SND_RK29_SOC_AIC3111 is not set
+# CONFIG_SND_RK29_SOC_AIC3262 is not set
+# CONFIG_SND_RK29_SOC_RK1000 is not set
+# CONFIG_SND_RK29_CODEC_SOC_MASTER is not set
+CONFIG_SND_RK29_CODEC_SOC_SLAVE=y
+# CONFIG_ADJUST_VOL_BY_CODEC is not set
+# CONFIG_PHONE_INCALL_IS_SUSPEND is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_RT5631=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_UHID is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_ACRUX=y
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=y
+CONFIG_HID_ELECOM=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KEYTOUCH=y
+CONFIG_HID_KYE=y
+CONFIG_HID_UCLOGIC=y
+CONFIG_HID_WALTOP=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LCPOWER=y
+CONFIG_HID_LOGITECH=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWII_FF=y
+CONFIG_HID_MAGICMOUSE=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_MULTITOUCH=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_PICOLCD=y
+# CONFIG_HID_PICOLCD_FB is not set
+# CONFIG_HID_PICOLCD_BACKLIGHT is not set
+# CONFIG_HID_PICOLCD_LEDS is not set
+CONFIG_HID_QUANTA=y
+CONFIG_HID_ROCCAT=y
+CONFIG_HID_ROCCAT_COMMON=y
+CONFIG_HID_ROCCAT_ARVO=y
+CONFIG_HID_ROCCAT_KONE=y
+CONFIG_HID_ROCCAT_KONEPLUS=y
+CONFIG_HID_ROCCAT_KOVAPLUS=y
+CONFIG_HID_ROCCAT_PYRA=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=y
+# CONFIG_HID_WACOM_POWER_SUPPLY is not set
+CONFIG_HID_ZEROPLUS=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_WWAN=y
+CONFIG_USB_SERIAL_OPTION=y
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_USI is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_DWC_OTG=y
+CONFIG_USB_DWC_OTG=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_G_ANDROID=y
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_OTG_WAKELOCK is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_USB11_HOST is not set
+CONFIG_USB20_HOST=y
+CONFIG_USB20_HOST_EN=y
+CONFIG_USB20_OTG=y
+# CONFIG_DWC_OTG_HOST_ONLY is not set
+CONFIG_DWC_OTG_DEVICE_ONLY=y
+# CONFIG_DWC_OTG_BOTH_HOST_SLAVE is not set
+CONFIG_DWC_CONN_EN=y
+# CONFIG_DWC_OTG_DEBUG is not set
+# CONFIG_DWC_REMOTE_WAKEUP is not set
+CONFIG_DWC_OTG=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_CLKGATE is not set
+CONFIG_MMC_EMBEDDED_SDIO=y
+CONFIG_MMC_PARANOID_SD_INIT=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_SDMMC_RK29=y
+
+#
+# Now, there are two SDMMC controllers selected, SDMMC0 and SDMMC1.
+#
+# CONFIG_SDMMC_RK29_OLD is not set
+CONFIG_SDMMC0_RK29=y
+# CONFIG_SDMMC0_RK29_WRITE_PROTECT is not set
+# CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO is not set
+CONFIG_SDMMC1_RK29=y
+# CONFIG_SDMMC1_RK29_WRITE_PROTECT is not set
+CONFIG_RK29_SDIO_IRQ_FROM_GPIO=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_WM831X_STATUS is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_ATT1272 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_TRIGGERS is not set
+
+#
+# LED Triggers
+#
+# CONFIG_NFC_DEVICES is not set
+CONFIG_SWITCH=y
+CONFIG_SWITCH_GPIO=y
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_AUTO_WAKE_UP is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_HYM8563=y
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_S35392A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_WM831X=y
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_TPS65910_RTC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+CONFIG_STAGING=y
+# CONFIG_VIDEO_TM6000 is not set
+# CONFIG_USBIP_CORE is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_BRCMUTIL is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_R8712U is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+# CONFIG_ANDROID_RAM_CONSOLE is not set
+CONFIG_ANDROID_TIMED_OUTPUT=y
+CONFIG_ANDROID_TIMED_GPIO=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+# CONFIG_POHMELFS is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_IIO is not set
+
+#
+# IPP
+#
+CONFIG_RK29_IPP=m
+CONFIG_DEINTERLACE=y
+# CONFIG_XVMALLOC is not set
+# CONFIG_ZRAM is not set
+# CONFIG_FB_SM7XX is not set
+# CONFIG_LIRC_STAGING is not set
+# CONFIG_EASYCAP is not set
+CONFIG_MACH_NO_WESTBRIDGE=y
+# CONFIG_ATH6K_LEGACY is not set
+# CONFIG_USB_ENESTORAGE is not set
+# CONFIG_BCM_WIMAX is not set
+# CONFIG_FT1000 is not set
+
+#
+# Speakup console speech
+#
+# CONFIG_SPEAKUP is not set
+# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
+
+#
+# Altera FPGA firmware download module
+#
+# CONFIG_ALTERA_STAPL is not set
+CONFIG_CLKDEV_LOOKUP=y
+
+#
+# CMMB
+#
+# CONFIG_CMMB is not set
+# CONFIG_TEST_CODE is not set
+# CONFIG_RK29_SMC is not set
+
+#
+# CIR support
+#
+# CONFIG_RK_CIR is not set
+
+#
+# MediaTek Connectivity Combo Chip Config
+#
+CONFIG_MTK_COMBO=y
+CONFIG_MTK_COMBO_CHIP_MT6620=y
+CONFIG_MTK_COMBO_PLAT_PATH="rockchip"
+CONFIG_MTK_COMBO_COMM=m
+CONFIG_MTK_COMBO_COMM_UART=m
+CONFIG_MTK_COMBO_BT_HW_TEST=m
+CONFIG_MTK_COMBO_BT_HCI=m
+CONFIG_MTK_COMBO_FM=m
+CONFIG_MTK_COMBO_WIFI=m
+# CONFIG_MTK_COMBO_WIFI_DEBUG is not set
+# CONFIG_MTK_COMBO_WIFI_PROC is not set
+CONFIG_MTK_COMBO_WIFI_HIF_SDIO1=y
+CONFIG_MTK_GPS=m
+CONFIG_MTK_COMBO_GPS=m
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_USE_FOR_EXT23=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_RCU_CPU_STALL_VERBOSE=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_LKDTM is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+CONFIG_ENABLE_DEFAULT_TRACERS=y
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=y
+CONFIG_TEXTSEARCH_BM=y
+CONFIG_TEXTSEARCH_FSM=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+CONFIG_AVERAGE=y

diff --git a/arch/arm/mach-rk30/board-rk3168m-tb-sdmmc-conifg.c b/arch/arm/mach-rk30/board-rk3168m-tb-sdmmc-conifg.c
new file mode 100644 (file)
index 0000000..738d107
--- /dev/null
+++ b/arch/arm/mach-rk30/board-rk3168m-tb-sdmmc-conifg.c
@@ -0,0 +1,160 @@
+/*****************************************************************************************
+ * arch/arm/mach-rkxx/baord-xxx-sdmmc-config.c
+ *
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * Description: 
+ *     define the gpio for SD-MMC-SDIO-Wifi functions  according to your own projects.
+ *
+ * Author: Michael Xie
+ *         15 Jan,2013
+ * E-mail: xbw@rock-chips.com
+ *
+ ******************************************************************************************/
+
+/*
+** If you select the macro of CONFIG_SDMMC0_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC0_WRITE_PROTECT_PIN                 RK30_PIN3_PB2       //According to your own project to set the value of write-protect-pin.
+//#define SDMMC0_WRITE_PROTECT_ENABLE_VALUE     GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_SDMMC1_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC1_WRITE_PROTECT_PIN                 RK30_PIN3_PB3       //According to your own project to set the value of write-protect-pin.
+//#define SDMMC1_WRITE_PROTECT_ENABLE_VALUE     GPIO_HIGH
+    
+/*
+** If you select the macro of CONFIG_RK29_SDIO_IRQ_FROM_GPIO, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define RK29SDK_WIFI_SDIO_CARD_INT         RK30_PIN3_PD2
+
+
+/*
+* define sdcard PowerEn-pin
+*/
+#define RK29SDK_SD_CARD_PWR_EN                  RK30_PIN3_PA1
+#define RK29SDK_SD_CARD_PWR_EN_LEVEL            GPIO_LOW 
+int rk31sdk_get_sdmmc0_pin_io_voltage(void)
+{
+    int voltage;
+#define RK31SDK_SET_SDMMC0_PIN_VOLTAGE
+
+    /**************************************************************************************
+    **  Please tell me how much voltage of your SDMMC0-pin in your project. 
+    **
+    **     ÀýÈç: ÓеÄÏîÄ¿£¬ËüµÄSDMMC0ËùÔÚµÄRKÖ÷¿ØµÄIO×飬ÏëÓÃ1.8V, ¶ø¿¨±¾ÉíÓÃ3.3V, 
+    **  ¶øÖмäͨ¹ý¸öµçƽת»».ÄÇô£¬Äú´Ëʱ£¬Ó¦¸ÃÉèÖÃÏÂÃæµÄvoltageֵΪ 1.8V(¼´1800mv)
+    ***************************************************************************************/
+    voltage = 3300;  //default the voltage 3300mv. 
+
+    return voltage;
+}
+
+/*
+* define the card-detect-pin.
+*/
+#define RK29SDK_SD_CARD_DETECT_N                RK30_PIN3_PB0  //According to your own project to set the value of card-detect-pin.
+#define RK29SDK_SD_CARD_INSERT_LEVEL            GPIO_LOW       // set the voltage of insert-card. Please pay attention to the default setting.
+
+/*
+* Define wifi module's power and reset gpio, and gpio sensitive level.
+* Please set the value according to your own project.
+*
+* Well, you just own engineering module to set the value in the corresponding module branch.
+* Otherwise, you do not define this macro, eliminate it.
+*
+*/          
+#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU) 
+    #define RK30SDK_WIFI_GPIO_POWER_N               RK30_PIN3_PD0            
+    #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE    GPIO_LOW//GPIO_HIGH        
+    
+#elif defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+    #define RK30SDK_WIFI_GPIO_POWER_N               RK30_PIN3_PD0                 
+    #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE    GPIO_HIGH
+
+    #define RK30SDK_WIFI_GPIO_RESET_N               RK30_PIN2_PA7
+    #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE    GPIO_HIGH 
+
+#elif defined(CONFIG_MT5931_MT6622) || defined(CONFIG_MT5931)
+
+       #ifdef  CONFIG_MACH_RK3168_LR097 
+       #define RK30SDK_WIFI_GPIO_POWER_N               RK30_PIN3_PD0 
+       #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE    GPIO_HIGH
+
+       //#define RK30SDK_WIFI_GPIO_RESET_N                 RK30_PIN3_PD1
+       //#define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE    GPIO_HIGH
+
+       #else
+       #define RK30SDK_WIFI_GPIO_POWER_N               RK30_PIN0_PA5
+       #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE    GPIO_HIGH
+
+       #define RK30SDK_WIFI_GPIO_RESET_N               RK30_PIN3_PD1
+       #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE    GPIO_HIGH       
+       #endif
+
+#elif defined(CONFIG_MT6620)
+    #define COMBO_MODULE_MT6620_CDT    0  // to control antsel2,antsel3 and gps_lan foot when using AcSip or Cdtech chip. 
+                                             //- 1--use Cdtech chip; 0--unuse CDT chip
+
+    //power, PMU_EN//hjc test
+    #define RK30SDK_WIFI_GPIO_POWER_N                   RK30_PIN1_PA4          
+    #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE        GPIO_HIGH        
+    //reset, DAIRST,SYSRST_B
+    #define RK30SDK_WIFI_GPIO_RESET_N                   RK30_PIN3_PD0
+    #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE        GPIO_HIGH 
+    //VDDIO
+    //#define RK30SDK_WIFI_GPIO_VCCIO_WL                  RK30_PIN0_PD2 //You do not get control of the foot, and you do not need to define the macro 
+    //#define RK30SDK_WIFI_GPIO_VCCIO_WL_ENABLE_VALUE     GPIO_HIGH
+    //WIFI_INT_B
+    #define RK30SDK_WIFI_GPIO_WIFI_INT_B                RK30_PIN3_PD2
+    #define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE   GPIO_HIGH 
+    //BGF_INT_B
+    #define RK30SDK_WIFI_GPIO_BGF_INT_B                 RK30_PIN0_PA5
+    #define RK30SDK_WIFI_GPIO_BGF_INT_B_ENABLE_VALUE    GPIO_HIGH 
+    //GPS_SYNC
+    #define RK30SDK_WIFI_GPIO_GPS_SYNC                  RK30_PIN3_PD1
+    #define RK30SDK_WIFI_GPIO_GPS_SYNC_ENABLE_VALUE     GPIO_HIGH 
+
+    #if COMBO_MODULE_MT6620_CDT
+    //ANTSEL2
+    #define RK30SDK_WIFI_GPIO_ANTSEL2                   RK30_PIN4_PD4
+    #define RK30SDK_WIFI_GPIO_ANTSEL2_ENABLE_VALUE      GPIO_LOW    //use 6620 in CDT chip, LOW--work; High--no work.
+    //ANTSEL3
+    #define RK30SDK_WIFI_GPIO_ANTSEL3                   RK30_PIN4_PD3
+    #define RK30SDK_WIFI_GPIO_ANTSEL3_ENABLE_VALUE      GPIO_HIGH    //use 6620 in CDT chip, High--work; Low--no work..
+    //GPS_LAN
+    #define RK30SDK_WIFI_GPIO_GPS_LAN                   RK30_PIN4_PD6
+    #define RK30SDK_WIFI_GPIO_GPS_LAN_ENABLE_VALUE      GPIO_HIGH    //use 6620 in CDT chip, High--work; Low--no work..
+    #endif // #if COMBO_MODULE_MT6620_CDT--#endif
+#endif 
+
+int rk31sdk_get_sdio_wifi_voltage(void)
+{
+    int voltage;
+    
+    /******************************************************************************
+    **  Please tell me how much wifi-module uses voltage in your project.  
+    ******************************************************************************/
+#if defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+    voltage = 1800 ; //power 1800mV
+    
+#elif defined(CONFIG_MT5931_MT6622)||defined(CONFIG_MT5931)
+    voltage = 1800 ; //power 1800V
+#elif defined(CONFIG_MT6620) 
+    voltage = 2800 ; //power 2800V
+#elif defined(CONFIG_RDA5990)||defined(CONFIG_RTL8723AS)  
+    voltage = 3300 ; //power 3300V
+#else
+    //default, sdio use 3.0V
+    voltage = 3000 ; //power 3000V
+#endif
+
+    return voltage;
+}
+
+
+   

diff --git a/arch/arm/mach-rk30/board-rk3168m-tb.c b/arch/arm/mach-rk30/board-rk3168m-tb.c
new file mode 100755 (executable)
index 0000000..1ea076f
--- /dev/null
+++ b/arch/arm/mach-rk30/board-rk3168m-tb.c
@@ -0,0 +1,2095 @@
+/*
+ *
+ * Copyright (C) 2012 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/spi/spi.h>
+#include <linux/mmc/host.h>
+#include <linux/ion.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <mach/dvfs.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+#include <linux/rk_fb.h>
+#include <linux/regulator/machine.h>
+#include <linux/rfkill-rk.h>
+#include <linux/sensor-dev.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/regulator/act8846.h>
+#include <linux/regulator/rk29-pwm-regulator.h>
+
+#if defined(CONFIG_MFD_RK610)
+#include <linux/mfd/rk610_core.h>
+#endif
+
+#if defined(CONFIG_RK_HDMI)
+       #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
+#endif
+
+#if defined(CONFIG_SPIM_RK29)
+#include "../../../drivers/spi/rk29_spim.h"
+#endif
+#if defined(CONFIG_GPS_RK)
+#include "../../../drivers/misc/gps/rk_gps/rk_gps.h"
+#endif
+
+#if defined(CONFIG_MU509)
+#include <linux/mu509.h>
+#endif
+#if defined(CONFIG_MW100)
+#include <linux/mw100.h>
+#endif
+#if defined(CONFIG_MT6229)
+#include <linux/mt6229.h>
+#endif
+#if defined(CONFIG_ANDROID_TIMED_GPIO)
+#include "../../../drivers/staging/android/timed_gpio.h"
+#endif
+
+#if defined(CONFIG_MT6620)
+#include <linux/gps.h>
+#endif
+#include "board-rk3168-tb-camera.c"
+
+#if defined(CONFIG_TOUCHSCREEN_GT8XX)
+#define TOUCH_RESET_PIN  RK30_PIN0_PB6
+#define TOUCH_PWR_PIN    RK30_PIN0_PC5   // need to fly line by hardware engineer
+static int goodix_init_platform_hw(void)
+{
+       int ret;
+       
+       if (TOUCH_PWR_PIN != INVALID_GPIO) {
+               ret = gpio_request(TOUCH_PWR_PIN, "goodix power pin");
+               if (ret != 0) {
+                       gpio_free(TOUCH_PWR_PIN);
+                       printk("goodix power error\n");
+                       return -EIO;
+               }
+               gpio_direction_output(TOUCH_PWR_PIN, 0);
+               gpio_set_value(TOUCH_PWR_PIN, GPIO_LOW);
+               msleep(100);
+       }
+
+       if (TOUCH_RESET_PIN != INVALID_GPIO) {
+               ret = gpio_request(TOUCH_RESET_PIN, "goodix reset pin");
+               if (ret != 0) {
+                       gpio_free(TOUCH_RESET_PIN);
+                       printk("goodix gpio_request error\n");
+                       return -EIO;
+               }
+               gpio_direction_output(TOUCH_RESET_PIN, 1);
+                msleep(100);
+               //gpio_set_value(TOUCH_RESET_PIN, GPIO_LOW);
+               //msleep(100);
+               //gpio_set_value(TOUCH_RESET_PIN, GPIO_HIGH);
+               //msleep(500);
+       }
+       return 0;
+}
+
+struct goodix_platform_data goodix_info = {
+       .model = 8105,
+       .irq_pin = RK30_PIN1_PB7,
+       .rest_pin = TOUCH_RESET_PIN,
+       .init_platform_hw = goodix_init_platform_hw,
+};
+#endif
+
+static struct spi_board_info board_spi_devices[] = {
+};
+
+/***********************************************************
+*      rk30  backlight
+************************************************************/
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+#define PWM_ID            3
+#define PWM_MODE          PWM3
+#define PWM_EFFECT_VALUE  1
+
+#define LCD_DISP_ON_PIN
+
+#ifdef  LCD_DISP_ON_PIN
+#define BL_EN_PIN         RK30_PIN0_PA2
+#define BL_EN_VALUE       GPIO_HIGH
+#endif
+static int rk29_backlight_io_init(void)
+{
+       int ret = 0;
+
+       iomux_set(PWM_MODE);
+#ifdef  LCD_DISP_ON_PIN
+       ret = gpio_request(BL_EN_PIN, "bl_en");
+       if (ret == 0) {
+               gpio_direction_output(BL_EN_PIN, BL_EN_VALUE);
+       }
+#endif
+       return ret;
+}
+
+static int rk29_backlight_io_deinit(void)
+{
+       int ret = 0, pwm_gpio;
+#ifdef  LCD_DISP_ON_PIN
+       gpio_free(BL_EN_PIN);
+#endif
+       pwm_gpio = iomux_mode_to_gpio(PWM_MODE);
+       gpio_request(pwm_gpio, "bl_pwm");
+       gpio_direction_output(pwm_gpio, GPIO_LOW);
+       return ret;
+}
+
+static int rk29_backlight_pwm_suspend(void)
+{
+       int ret, pwm_gpio = iomux_mode_to_gpio(PWM_MODE);
+
+       ret = gpio_request(pwm_gpio, "bl_pwm");
+       if (ret) {
+               printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
+               return ret;
+       }
+       gpio_direction_output(pwm_gpio, GPIO_LOW);
+#ifdef  LCD_DISP_ON_PIN
+       gpio_direction_output(BL_EN_PIN, !BL_EN_VALUE);
+#endif
+       return ret;
+}
+
+static int rk29_backlight_pwm_resume(void)
+{
+       int pwm_gpio = iomux_mode_to_gpio(PWM_MODE);
+
+       gpio_free(pwm_gpio);
+       iomux_set(PWM_MODE);
+#ifdef  LCD_DISP_ON_PIN
+       msleep(30);
+       gpio_direction_output(BL_EN_PIN, BL_EN_VALUE);
+#endif
+       return 0;
+}
+
+static struct rk29_bl_info rk29_bl_info = {
+       .pwm_id = PWM_ID,
+       .min_brightness=20,
+       .max_brightness=255,
+       .brightness_mode =BRIGHTNESS_MODE_CONIC,
+       .bl_ref = PWM_EFFECT_VALUE,
+       .io_init = rk29_backlight_io_init,
+       .io_deinit = rk29_backlight_io_deinit,
+       .pwm_suspend = rk29_backlight_pwm_suspend,
+       .pwm_resume = rk29_backlight_pwm_resume,
+};
+
+static struct platform_device rk29_device_backlight = {
+       .name   = "rk29_backlight",
+       .id     = -1,
+       .dev    = {
+               .platform_data  = &rk29_bl_info,
+       }
+};
+
+#endif
+
+#ifdef CONFIG_RK29_SUPPORT_MODEM
+
+#define RK30_MODEM_POWER        RK30_PIN0_PC6
+#define RK30_MODEM_POWER_IOMUX  iomux_set(GPIO0_C6)
+
+static int rk30_modem_io_init(void)
+{
+    printk("%s\n", __FUNCTION__);
+    RK30_MODEM_POWER_IOMUX;
+
+       return 0;
+}
+
+static struct rk29_io_t rk30_modem_io = {
+    .io_addr    = RK30_MODEM_POWER,
+    .enable     = GPIO_HIGH,
+    .disable    = GPIO_LOW,
+    .io_init    = rk30_modem_io_init,
+};
+
+static struct platform_device rk30_device_modem = {
+       .name   = "rk30_modem",
+       .id     = -1,
+       .dev    = {
+               .platform_data  = &rk30_modem_io,
+       }
+};
+#endif
+#if defined(CONFIG_MU509)
+static int mu509_io_init(void)
+{
+
+       iomux_set(GPIO2_D5);
+       iomux_set(GPIO0_C6);
+       iomux_set(GPIO2_D4);
+       iomux_set(GPIO0_C4);
+       iomux_set(GPIO0_C5);
+       return 0;
+}
+
+static int mu509_io_deinit(void)
+{
+       
+       return 0;
+}
+ 
+struct rk29_mu509_data rk29_mu509_info = {
+       .io_init = mu509_io_init,
+       .io_deinit = mu509_io_deinit,
+       .modem_power_en = RK30_PIN2_PD5,   
+       .bp_power = RK30_PIN0_PC6,              
+       .bp_reset = RK30_PIN2_PD4,              
+       .ap_wakeup_bp = RK30_PIN0_PC4,  
+       .bp_wakeup_ap = RK30_PIN0_PC5,  
+};
+struct platform_device rk29_device_mu509 = {   
+        .name = "mu509",       
+       .id = -1,       
+       .dev            = {
+               .platform_data = &rk29_mu509_info,
+       }       
+    };
+#endif
+#if defined(CONFIG_MW100)
+static int mw100_io_init(void)
+{
+       iomux_set(GPIO2_D5);
+       iomux_set(GPIO0_C6);
+       iomux_set(GPIO2_D4);
+       iomux_set(GPIO0_C4);
+       iomux_set(GPIO0_C5);
+       return 0;
+}
+
+static int mw100_io_deinit(void)
+{
+       
+       return 0;
+}
+ 
+struct rk29_mw100_data rk29_mw100_info = {
+       .io_init = mw100_io_init,
+       .io_deinit = mw100_io_deinit,
+       .modem_power_en = RK30_PIN2_PD5,
+       .bp_power = RK30_PIN0_PC6,
+       .bp_reset = RK30_PIN2_PD4,
+       .ap_wakeup_bp = RK30_PIN0_PC4,
+       .bp_wakeup_ap = RK30_PIN0_PC5,
+};
+struct platform_device rk29_device_mw100 = {   
+        .name = "mw100",       
+       .id = -1,       
+       .dev            = {
+               .platform_data = &rk29_mw100_info,
+       }       
+    };
+#endif
+#if defined(CONFIG_MT6229)
+static int mt6229_io_init(void)
+{
+       iomux_set(GPIO2_D5);
+       iomux_set(GPIO0_C6);
+       iomux_set(GPIO2_D4);
+       iomux_set(GPIO0_C4);
+       iomux_set(GPIO0_C5);
+       return 0;
+}
+
+static int mt6229_io_deinit(void)
+{
+       
+       return 0;
+}
+ 
+struct rk29_mt6229_data rk29_mt6229_info = {
+       .io_init = mt6229_io_init,
+       .io_deinit = mt6229_io_deinit,
+       .modem_power_en = RK30_PIN2_PD5,
+       .bp_power = RK30_PIN0_PC6,
+       .bp_reset = RK30_PIN2_PD4,
+       .ap_wakeup_bp = RK30_PIN0_PC4,
+       .bp_wakeup_ap = RK30_PIN0_PC5,
+};
+struct platform_device rk29_device_mt6229 = {  
+        .name = "mt6229",      
+       .id = -1,       
+       .dev            = {
+               .platform_data = &rk29_mt6229_info,
+       }       
+    };
+#endif
+
+/*MMA8452 gsensor*/
+#if defined (CONFIG_GS_MMA8452)
+#define MMA8452_INT_PIN   RK30_PIN0_PB7
+
+static int mma8452_init_platform_hw(void)
+{
+       return 0;
+}
+
+static struct sensor_platform_data mma8452_info = {
+       .type = SENSOR_TYPE_ACCEL,
+       .irq_enable = 1,
+       .poll_delay_ms = 30,
+        .init_platform_hw = mma8452_init_platform_hw,
+        .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
+};
+#endif
+#if defined (CONFIG_GS_LIS3DH)
+#define LIS3DH_INT_PIN   RK30_PIN0_PB7
+
+static int lis3dh_init_platform_hw(void)
+{
+
+        return 0;
+}
+
+static struct sensor_platform_data lis3dh_info = {
+       .type = SENSOR_TYPE_ACCEL,
+       .irq_enable = 1,
+       .poll_delay_ms = 30,
+        .init_platform_hw = lis3dh_init_platform_hw,
+       .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
+};
+#endif
+#if defined (CONFIG_COMPASS_AK8975)
+static struct sensor_platform_data akm8975_info =
+{
+       .type = SENSOR_TYPE_COMPASS,
+       .irq_enable = 1,
+       .poll_delay_ms = 30,
+       .m_layout = 
+       {
+               {
+                       {1, 0, 0},
+                       {0, 1, 0},
+                       {0, 0, 1},
+               },
+
+               {
+                       {1, 0, 0},
+                       {0, 1, 0},
+                       {0, 0, 1},
+               },
+
+               {
+                       {1, 0, 0},
+                       {0, 1, 0},
+                       {0, 0, 1},
+               },
+
+               {
+                       {1, 0, 0},
+                       {0, 1, 0},
+                       {0, 0, 1},
+               },
+       }
+};
+
+#endif
+
+#if defined(CONFIG_GYRO_L3G4200D)
+
+#include <linux/l3g4200d.h>
+#define L3G4200D_INT_PIN  RK30_PIN0_PB4
+
+static int l3g4200d_init_platform_hw(void)
+{
+       return 0;
+}
+
+static struct sensor_platform_data l3g4200d_info = {
+       .type = SENSOR_TYPE_GYROSCOPE,
+       .irq_enable = 1,
+       .poll_delay_ms = 30,
+       .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
+       .init_platform_hw = l3g4200d_init_platform_hw,
+       .x_min = 40,//x_min,y_min,z_min = (0-100) according to hardware
+       .y_min = 40,
+       .z_min = 20,
+};
+
+#endif
+
+#ifdef CONFIG_LS_CM3217
+static struct sensor_platform_data cm3217_info = {
+       .type = SENSOR_TYPE_LIGHT,
+       .irq_enable = 0,
+       .poll_delay_ms = 500,
+};
+
+#endif
+
+#ifdef CONFIG_FB_ROCKCHIP
+
+#define LCD_CS_PIN         INVALID_GPIO
+#define LCD_CS_VALUE       GPIO_HIGH
+
+#define LCD_EN_PIN         RK30_PIN0_PB0
+#define LCD_EN_VALUE       GPIO_HIGH
+
+static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
+{
+       int ret = 0;
+
+       if(LCD_CS_PIN !=INVALID_GPIO)
+       {
+               ret = gpio_request(LCD_CS_PIN, NULL);
+               if (ret != 0)
+               {
+                       gpio_free(LCD_CS_PIN);
+                       printk(KERN_ERR "request lcd cs pin fail!\n");
+                       return -1;
+               }
+               else
+               {
+                       gpio_direction_output(LCD_CS_PIN, LCD_CS_VALUE);
+               }
+       }
+
+       if(LCD_EN_PIN !=INVALID_GPIO)
+       {
+               ret = gpio_request(LCD_EN_PIN, NULL);
+               if (ret != 0)
+               {
+                       gpio_free(LCD_EN_PIN);
+                       printk(KERN_ERR "request lcd en pin fail!\n");
+                       return -1;
+               }
+               else
+               {
+                       gpio_direction_output(LCD_EN_PIN, LCD_EN_VALUE);
+               }
+       }
+       return 0;
+}
+static int rk_fb_io_disable(void)
+{
+       if(LCD_CS_PIN !=INVALID_GPIO)
+       {
+               gpio_set_value(LCD_CS_PIN, !LCD_CS_VALUE);
+       }
+       if(LCD_EN_PIN !=INVALID_GPIO)
+       {
+               gpio_set_value(LCD_EN_PIN, !LCD_EN_VALUE);
+       }
+       return 0;
+}
+static int rk_fb_io_enable(void)
+{
+       if(LCD_CS_PIN !=INVALID_GPIO)
+       {
+               gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE);
+       }
+       if(LCD_EN_PIN !=INVALID_GPIO)
+       {
+               gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
+       }
+       return 0;
+}
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+struct rk29fb_info lcdc0_screen_info = {
+       .prop      = PRMRY,             //primary display device
+       .io_init   = rk_fb_io_init,
+       .io_disable = rk_fb_io_disable,
+       .io_enable = rk_fb_io_enable,
+       .set_screen_info = set_lcd_info,
+};
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+struct rk29fb_info lcdc1_screen_info = {
+       #if defined(CONFIG_RK_HDMI)
+       .prop           = EXTEND,       //extend display device
+       .lcd_info  = NULL,
+       .set_screen_info = hdmi_init_lcdc,
+       #endif
+};
+#endif
+
+static struct resource resource_fb[] = {
+       [0] = {
+               .name  = "fb0 buf",
+               .start = 0,
+               .end   = 0,//RK30_FB0_MEM_SIZE - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .name  = "ipp buf",  //for rotate
+               .start = 0,
+               .end   = 0,//RK30_FB0_MEM_SIZE - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       [2] = {
+               .name  = "fb2 buf",
+               .start = 0,
+               .end   = 0,//RK30_FB0_MEM_SIZE - 1,
+               .flags = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device device_fb = {
+       .name           = "rk-fb",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(resource_fb),
+       .resource       = resource_fb,
+};
+#endif
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+static struct resource resource_lcdc0[] = {
+       [0] = {
+               .name  = "lcdc0 reg",
+               .start = RK30_LCDC0_PHYS,
+               .end   = RK30_LCDC0_PHYS + RK30_LCDC0_SIZE - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       
+       [1] = {
+               .name  = "lcdc0 irq",
+               .start = IRQ_LCDC0,
+               .end   = IRQ_LCDC0,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device device_lcdc0 = {
+       .name             = "rk30-lcdc",
+       .id               = 0,
+       .num_resources    = ARRAY_SIZE(resource_lcdc0),
+       .resource         = resource_lcdc0,
+       .dev            = {
+               .platform_data = &lcdc0_screen_info,
+       },
+};
+#endif
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+static struct resource resource_lcdc1[] = {
+       [0] = {
+               .name  = "lcdc1 reg",
+               .start = RK30_LCDC1_PHYS,
+               .end   = RK30_LCDC1_PHYS + RK30_LCDC1_SIZE - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .name  = "lcdc1 irq",
+               .start = IRQ_LCDC1,
+               .end   = IRQ_LCDC1,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device device_lcdc1 = {
+       .name             = "rk30-lcdc",
+       .id               = 1,
+       .num_resources    = ARRAY_SIZE(resource_lcdc1),
+       .resource         = resource_lcdc1,
+       .dev            = {
+               .platform_data = &lcdc1_screen_info,
+       },
+};
+#endif
+
+#if defined(CONFIG_MFD_RK610)
+#define RK610_RST_PIN                  RK30_PIN2_PC5
+static int rk610_power_on_init(void)
+{
+       int ret;
+       if(RK610_RST_PIN != INVALID_GPIO)
+       {
+               ret = gpio_request(RK610_RST_PIN, "rk610 reset");
+               if (ret)
+               {
+                       printk(KERN_ERR "rk610_control_probe request gpio fail\n");
+               }
+               else 
+               {
+                       gpio_direction_output(RK610_RST_PIN, GPIO_HIGH);
+                       msleep(100);
+                       gpio_direction_output(RK610_RST_PIN, GPIO_LOW);
+                       msleep(100);
+                       gpio_set_value(RK610_RST_PIN, GPIO_HIGH);
+               }
+       }
+
+       return 0;
+       
+}
+
+
+static struct rk610_ctl_platform_data rk610_ctl_pdata = {
+       .rk610_power_on_init = rk610_power_on_init,
+};
+#endif
+
+#ifdef CONFIG_SND_SOC_RK610
+static int rk610_codec_io_init(void)
+{
+//if need iomux.
+//Must not gpio_request
+       return 0;
+}
+
+static struct rk610_codec_platform_data rk610_codec_pdata = {
+       .spk_ctl_io = RK30_PIN4_PC6,
+       .io_init = rk610_codec_io_init,
+};
+#endif
+
+#ifdef CONFIG_ANDROID_TIMED_GPIO
+static struct timed_gpio timed_gpios[] = {
+       {
+               .name = "vibrator",
+               .gpio = INVALID_GPIO,
+               .max_timeout = 1000,
+               .active_low = 0,
+               .adjust_time =20,      //adjust for diff product
+       },
+};
+
+static struct timed_gpio_platform_data rk29_vibrator_info = {
+       .num_gpios = 1,
+       .gpios = timed_gpios,
+};
+
+static struct platform_device rk29_device_vibrator = {
+       .name = "timed-gpio",
+       .id = -1,
+       .dev = {
+               .platform_data = &rk29_vibrator_info,
+       },
+
+};
+#endif
+
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+static struct gpio_led rk29_leds[] = {
+       {
+               .name = "button-backlight",
+               .gpio = INVALID_GPIO,
+               .default_trigger = "timer",
+               .active_low = 0,
+               .retain_state_suspended = 0,
+               .default_state = LEDS_GPIO_DEFSTATE_OFF,
+       },
+};
+
+static struct gpio_led_platform_data rk29_leds_pdata = {
+       .leds = rk29_leds,
+       .num_leds = ARRAY_SIZE(rk29_leds),
+};
+
+static struct platform_device rk29_device_gpio_leds = {
+       .name   = "leds-gpio",
+       .id     = -1,
+       .dev    = {
+               .platform_data  = &rk29_leds_pdata,
+       },
+};
+#endif
+
+#ifdef CONFIG_RK_IRDA
+#define IRDA_IRQ_PIN           INVALID_GPIO //RK30_PIN0_PA3
+
+static int irda_iomux_init(void)
+{
+       int ret = 0;
+
+       //irda irq pin
+       ret = gpio_request(IRDA_IRQ_PIN, NULL);
+       if (ret != 0) {
+               gpio_free(IRDA_IRQ_PIN);
+               printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
+       }
+       gpio_pull_updown(IRDA_IRQ_PIN, PullDisable);
+       gpio_direction_input(IRDA_IRQ_PIN);
+
+       return 0;
+}
+
+static int irda_iomux_deinit(void)
+{
+       gpio_free(IRDA_IRQ_PIN);
+       return 0;
+}
+
+static struct irda_info rk29_irda_info = {
+       .intr_pin = IRDA_IRQ_PIN,
+       .iomux_init = irda_iomux_init,
+       .iomux_deinit = irda_iomux_deinit,
+       //.irda_pwr_ctl = bu92747guw_power_ctl,
+};
+
+static struct platform_device irda_device = {
+#ifdef CONFIG_RK_IRDA_NET
+       .name = "rk_irda",
+#else
+       .name = "bu92747_irda",
+#endif
+       .id = -1,
+       .dev = {
+               .platform_data = &rk29_irda_info,
+       }
+};
+#endif
+
+#ifdef CONFIG_ION
+#define ION_RESERVE_SIZE        (80 * SZ_1M)
+static struct ion_platform_data rk30_ion_pdata = {
+       .nr = 1,
+       .heaps = {
+               {
+                       .type = ION_HEAP_TYPE_CARVEOUT,
+                       .id = ION_NOR_HEAP_ID,
+                       .name = "norheap",
+                       .size = ION_RESERVE_SIZE,
+               }
+       },
+};
+
+static struct platform_device device_ion = {
+       .name = "ion-rockchip",
+       .id = 0,
+       .dev = {
+               .platform_data = &rk30_ion_pdata,
+       },
+};
+#endif
+
+/**************************************************************************************************
+ * SDMMC devices,  include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
+**************************************************************************************************/
+#ifdef CONFIG_SDMMC_RK29
+#include "board-rk3168m-tb-sdmmc-conifg.c"
+#include "../plat-rk/rk-sdmmc-ops.c"
+#include "../plat-rk/rk-sdmmc-wifi.c"
+#endif //endif ---#ifdef CONFIG_SDMMC_RK29
+
+#ifdef CONFIG_SDMMC0_RK29
+static int rk29_sdmmc0_cfg_gpio(void)
+{
+#ifdef CONFIG_SDMMC_RK29_OLD
+       iomux_set(MMC0_CMD);
+       iomux_set(MMC0_CLKOUT);
+       iomux_set(MMC0_D0);
+       iomux_set(MMC0_D1);
+       iomux_set(MMC0_D2);
+       iomux_set(MMC0_D3);
+
+       iomux_set_gpio_mode(iomux_mode_to_gpio(MMC0_DETN));
+
+       gpio_request(RK30_PIN3_PA7, "sdmmc-power");
+       gpio_direction_output(RK30_PIN3_PA7, GPIO_LOW);
+
+#else
+       rk29_sdmmc_set_iomux(0, 0xFFFF);
+
+    #if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+        #if SDMMC_USE_NEW_IOMUX_API
+        iomux_set_gpio_mode(iomux_gpio_to_mode(RK29SDK_SD_CARD_DETECT_N));
+        #else
+        rk30_mux_api_set(RK29SDK_SD_CARD_DETECT_PIN_NAME, RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO);
+        #endif
+    #else
+        #if SDMMC_USE_NEW_IOMUX_API       
+        iomux_set(MMC0_DETN);
+        #else
+        rk30_mux_api_set(RK29SDK_SD_CARD_DETECT_PIN_NAME, RK29SDK_SD_CARD_DETECT_IOMUX_FMUX);
+        #endif
+    #endif     
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+       gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
+       gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
+#endif
+
+#endif
+
+       return 0;
+}
+
+#define CONFIG_SDMMC0_USE_DMA
+struct rk29_sdmmc_platform_data default_sdmmc0_data = {
+       .host_ocr_avail =
+           (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+            MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+            MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
+       .host_caps =
+           (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+       .io_init = rk29_sdmmc0_cfg_gpio,
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+       .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+
+       .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+       .use_dma = 1,
+#else
+       .use_dma = 0,
+#endif
+
+#if defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC) && defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)
+    .status = rk29sdk_wifi_mmc0_status,
+    .register_status_notify = rk29sdk_wifi_mmc0_status_register,
+#endif
+
+#if defined(RK29SDK_SD_CARD_PWR_EN) || (INVALID_GPIO != RK29SDK_SD_CARD_PWR_EN)
+    .power_en = RK29SDK_SD_CARD_PWR_EN,
+    .power_en_level = RK29SDK_SD_CARD_PWR_EN_LEVEL,
+#else
+    .power_en = INVALID_GPIO,
+    .power_en_level = GPIO_LOW,
+#endif    
+       .enable_sd_wakeup = 0,
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+       .write_prt = SDMMC0_WRITE_PROTECT_PIN,
+       .write_prt_enalbe_level = SDMMC0_WRITE_PROTECT_ENABLE_VALUE;
+#else
+       .write_prt = INVALID_GPIO,
+#endif
+
+    .det_pin_info = {    
+    #if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)  
+        .io             = RK29SDK_SD_CARD_DETECT_N, //INVALID_GPIO,
+        .enable         = RK29SDK_SD_CARD_INSERT_LEVEL,
+        #ifdef RK29SDK_SD_CARD_DETECT_PIN_NAME
+        .iomux          = {
+            .name       = RK29SDK_SD_CARD_DETECT_PIN_NAME,
+            #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO
+            .fgpio      = RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO,
+            #endif
+            #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FMUX
+            .fmux       = RK29SDK_SD_CARD_DETECT_IOMUX_FMUX,
+            #endif
+        },
+        #endif
+    #else
+        .io             = INVALID_GPIO,
+        .enable         = GPIO_LOW,
+    #endif    
+    }, 
+
+};
+#endif // CONFIG_SDMMC0_RK29
+
+#ifdef CONFIG_SDMMC1_RK29
+#define CONFIG_SDMMC1_USE_DMA
+static int rk29_sdmmc1_cfg_gpio(void)
+{
+#if defined(CONFIG_SDMMC_RK29_OLD)
+       iomux_set(MMC1_CMD);
+       iomux_set(MMC1_CLKOUT);
+       iomux_set(MMC1_D0);
+       iomux_set(MMC1_D1);
+       iomux_set(MMC1_D2);
+       iomux_set(MMC1_D3);
+#else
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+       gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
+       gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
+#endif
+
+#endif
+
+       return 0;
+}
+
+struct rk29_sdmmc_platform_data default_sdmmc1_data = {
+       .host_ocr_avail =
+           (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+            MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+            MMC_VDD_33_34),
+
+#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+       .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
+                     MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#else
+       .host_caps =
+           (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#endif
+
+       .io_init = rk29_sdmmc1_cfg_gpio,
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+       .set_iomux = rk29_sdmmc_set_iomux,
+#endif
+
+       .dma_name = "sdio",
+#ifdef CONFIG_SDMMC1_USE_DMA
+       .use_dma = 1,
+#else
+       .use_dma = 0,
+#endif
+
+#if defined(CONFIG_WIFI_CONTROL_FUNC) || defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+    .status = rk29sdk_wifi_status,
+    .register_status_notify = rk29sdk_wifi_status_register,
+#endif
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+       .write_prt = SDMMC1_WRITE_PROTECT_PIN,
+           .write_prt_enalbe_level = SDMMC1_WRITE_PROTECT_ENABLE_VALUE;
+#else
+       .write_prt = INVALID_GPIO,
+#endif
+
+    #if defined(CONFIG_RK29_SDIO_IRQ_FROM_GPIO)
+        .sdio_INT_gpio = RK29SDK_WIFI_SDIO_CARD_INT,
+    #endif
+
+    .det_pin_info = {    
+#if defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+     #if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)  
+        .io             = RK29SDK_SD_CARD_DETECT_N,
+     #else
+         .io             = INVALID_GPIO,
+     #endif   
+
+        .enable         = RK29SDK_SD_CARD_INSERT_LEVEL,
+        #ifdef RK29SDK_SD_CARD_DETECT_PIN_NAME
+        .iomux          = {
+            .name       = RK29SDK_SD_CARD_DETECT_PIN_NAME,
+            #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO
+            .fgpio      = RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO,
+            #endif
+            #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FMUX
+            .fmux       = RK29SDK_SD_CARD_DETECT_IOMUX_FMUX,
+            #endif
+        },
+        #endif
+ #else
+        .io             = INVALID_GPIO,
+        .enable         = GPIO_LOW,
+#endif
+    },
+   
+       .enable_sd_wakeup = 0,
+};
+#endif //endif--#ifdef CONFIG_SDMMC1_RK29
+
+/**************************************************************************************************
+ * the end of setting for SDMMC devices
+**************************************************************************************************/
+
+#ifdef CONFIG_BATTERY_RK30_ADC
+static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = {
+        .dc_det_pin      = RK30_PIN0_PB2,
+        .batt_low_pin    = RK30_PIN0_PB1, 
+        .charge_set_pin  = INVALID_GPIO,
+        .charge_ok_pin   = RK30_PIN0_PA6,
+        .dc_det_level    = GPIO_LOW,
+        .charge_ok_level = GPIO_HIGH,
+};
+
+static struct platform_device rk30_device_adc_battery = {
+        .name   = "rk30-battery",
+        .id     = -1,
+        .dev = {
+                .platform_data = &rk30_adc_battery_platdata,
+        },
+};
+#endif
+#ifdef CONFIG_RK30_PWM_REGULATOR
+static int pwm_voltage_map[] = {
+       800000,825000,850000, 875000,900000, 925000 ,950000, 975000,1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000,1375000
+};
+static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
+       {
+               .supply = "vdd_cpu",
+       }
+};
+
+struct regulator_init_data pwm_regulator_init_dcdc[1] =
+{
+       {
+               .constraints = {
+                       .name = "PWM_DCDC1",
+                       .min_uV = 600000,
+                       .max_uV = 1800000,      //0.6-1.8V
+                       .apply_uV = true,
+                       .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+               },
+               .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
+               .consumer_supplies = pwm_dcdc1_consumers,
+       },
+};
+
+static struct pwm_platform_data pwm_regulator_info[1] = {
+       {
+               .pwm_id = 1,
+               .pwm_gpio = RK30_PIN3_PD4,
+               .pwm_iomux_pwm = PWM1,
+               .pwm_iomux_gpio = GPIO3_D4,
+               .pwm_voltage = 1100000,
+               .suspend_voltage = 1000000,
+               .min_uV = 800000,
+               .max_uV = 1375000,
+               .coefficient = 575,     //57.5%
+               .pwm_voltage_map = pwm_voltage_map,
+               .init_data      = &pwm_regulator_init_dcdc[0],
+       },
+};
+
+struct platform_device pwm_regulator_device[1] = {
+       {
+               .name = "pwm-voltage-regulator",
+               .id = 0,
+               .dev            = {
+                       .platform_data = &pwm_regulator_info[0],
+               }
+       },
+};
+#endif
+
+#ifdef CONFIG_RK29_VMAC
+#define PHY_PWR_EN_GPIO        RK30_PIN1_PD6
+#include "board-rk30-sdk-vmac.c"
+#endif
+
+#ifdef CONFIG_RFKILL_RK
+// bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c
+static struct rfkill_rk_platform_data rfkill_rk_platdata = {
+    .type               = RFKILL_TYPE_BLUETOOTH,
+
+    .poweron_gpio       = { // BT_REG_ON
+        .io             = INVALID_GPIO, //RK30_PIN3_PC7,
+        .enable         = GPIO_HIGH,
+        .iomux          = {
+            .name       = "bt_poweron",
+            .fgpio      = GPIO3_C7,
+        },
+    },
+
+    .reset_gpio         = { // BT_RST
+        .io             = RK30_PIN3_PC7, // set io to INVALID_GPIO for disable it
+        .enable         = GPIO_LOW,
+        .iomux          = {
+            .name       = "bt_reset",
+            .fgpio      = GPIO3_C7,
+       },
+   }, 
+
+    .wake_gpio          = { // BT_WAKE, use to control bt's sleep and wakeup
+        .io             = RK30_PIN3_PC6, // set io to INVALID_GPIO for disable it
+        .enable         = GPIO_HIGH,
+        .iomux          = {
+            .name       = "bt_wake",
+            .fgpio      = GPIO3_C6,
+        },
+    },
+
+    .wake_host_irq      = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep
+        .gpio           = {
+            .io         = RK30_PIN0_PA5, // set io to INVALID_GPIO for disable it
+            .enable     = GPIO_LOW,      // set GPIO_LOW for falling, set 0 for rising
+            .iomux      = {
+                .name   = NULL,
+            },
+        },
+    },
+
+    .rts_gpio           = { // UART_RTS, enable or disable BT's data coming
+        .io             = RK30_PIN1_PA3, // set io to INVALID_GPIO for disable it
+        .enable         = GPIO_LOW,
+        .iomux          = {
+            .name       = "bt_rts",
+            .fgpio      = GPIO1_A3,
+            .fmux       = UART0_RTSN,
+        },
+    },
+};
+
+static struct platform_device device_rfkill_rk = {
+    .name   = "rfkill_rk",
+    .id     = -1,
+    .dev    = {
+        .platform_data = &rfkill_rk_platdata,
+    },
+};
+#endif
+
+#if defined(CONFIG_GPS_RK)
+int rk_gps_io_init(void)
+{
+       printk("%s \n", __FUNCTION__);
+       
+       gpio_request(RK30_PIN1_PB5, NULL);
+       gpio_direction_output(RK30_PIN1_PB5, GPIO_LOW);
+
+       iomux_set(GPS_RFCLK);//GPS_CLK
+       iomux_set(GPS_MAG);//GPS_MAG
+       iomux_set(GPS_SIG);//GPS_SIGN
+
+       gpio_request(RK30_PIN1_PA6, NULL);
+       gpio_direction_output(RK30_PIN1_PA6, GPIO_LOW);
+
+       gpio_request(RK30_PIN1_PA5, NULL);
+       gpio_direction_output(RK30_PIN1_PA5, GPIO_LOW); 
+
+       gpio_request(RK30_PIN1_PA7, NULL);
+       gpio_direction_output(RK30_PIN1_PA7, GPIO_LOW);         
+       return 0;
+}
+int rk_gps_power_up(void)
+{
+       printk("%s \n", __FUNCTION__);
+
+       return 0;
+}
+
+int rk_gps_power_down(void)
+{
+       printk("%s \n", __FUNCTION__);
+
+       return 0;
+}
+
+int rk_gps_reset_set(int level)
+{
+       return 0;
+}
+int rk_enable_hclk_gps(void)
+{
+       struct clk *gps_aclk = NULL;
+       gps_aclk = clk_get(NULL, "aclk_gps");
+       if(gps_aclk) {
+               clk_enable(gps_aclk);
+               clk_put(gps_aclk);
+               printk("%s \n", __FUNCTION__);
+       }
+       else
+               printk("get gps aclk fail\n");
+       return 0;
+}
+int rk_disable_hclk_gps(void)
+{
+       struct clk *gps_aclk = NULL;
+       gps_aclk = clk_get(NULL, "aclk_gps");
+       if(gps_aclk) {
+               //TO wait long enough until GPS ISR is finished.
+               msleep(5);
+               clk_disable(gps_aclk);
+               clk_put(gps_aclk);
+               printk("%s \n", __FUNCTION__);
+       }       
+       else
+               printk("get gps aclk fail\n");
+       return 0;
+}
+struct rk_gps_data rk_gps_info = {
+       .io_init = rk_gps_io_init,
+       .power_up = rk_gps_power_up,
+       .power_down = rk_gps_power_down,
+       .reset = rk_gps_reset_set,
+       .enable_hclk_gps = rk_enable_hclk_gps,
+       .disable_hclk_gps = rk_disable_hclk_gps,
+       .GpsSign = RK30_PIN1_PB3,
+       .GpsMag = RK30_PIN1_PB2,        //GPIO index
+       .GpsClk = RK30_PIN1_PB4,        //GPIO index
+       .GpsVCCEn = RK30_PIN1_PB5,     //GPIO index
+       .GpsSpi_CSO = RK30_PIN1_PA4,    //GPIO index
+       .GpsSpiClk = RK30_PIN1_PA5,     //GPIO index
+       .GpsSpiMOSI = RK30_PIN1_PA7,      //GPIO index
+       .GpsIrq = IRQ_GPS,
+       .GpsSpiEn = 0,
+       .GpsAdcCh = 2,
+       .u32GpsPhyAddr = RK30_GPS_PHYS,
+       .u32GpsPhySize = RK30_GPS_SIZE,
+};
+
+struct platform_device rk_device_gps = {
+       .name = "gps_hv5820b",
+       .id = -1,
+       .dev            = {
+       .platform_data = &rk_gps_info,
+               }
+       };
+#endif
+
+
+static struct platform_device *devices[] __initdata = {
+#ifdef CONFIG_ION
+       &device_ion,
+#endif
+#ifdef CONFIG_ANDROID_TIMED_GPIO
+       &rk29_device_vibrator,
+#endif
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+       &rk29_device_gpio_leds,
+#endif
+#ifdef CONFIG_RK_IRDA
+       &irda_device,
+#endif
+#if defined(CONFIG_WIFI_CONTROL_FUNC)||defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+       &rk29sdk_wifi_device,
+#endif
+
+#if defined(CONFIG_MT6620)
+    &mt3326_device_gps,
+#endif   
+
+#ifdef CONFIG_RK29_SUPPORT_MODEM
+       &rk30_device_modem,
+#endif
+#if defined(CONFIG_MU509)
+       &rk29_device_mu509,
+#endif
+#if defined(CONFIG_MW100)
+       &rk29_device_mw100,
+#endif
+#if defined(CONFIG_MT6229)
+       &rk29_device_mt6229,
+#endif
+#ifdef CONFIG_BATTERY_RK30_ADC
+       &rk30_device_adc_battery,
+#endif
+#ifdef CONFIG_RFKILL_RK
+       &device_rfkill_rk,
+#endif
+#ifdef CONFIG_GPS_RK
+       &rk_device_gps,
+#endif
+
+};
+
+static int rk_platform_add_display_devices(void)
+{
+       struct platform_device *fb = NULL;  //fb
+       struct platform_device *lcdc0 = NULL; //lcdc0
+       struct platform_device *lcdc1 = NULL; //lcdc1
+       struct platform_device *bl = NULL; //backlight
+#ifdef CONFIG_FB_ROCKCHIP
+       fb = &device_fb;
+#endif
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+       lcdc0 = &device_lcdc0,
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+       lcdc1 = &device_lcdc1,
+#endif
+
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+       bl = &rk29_device_backlight,
+#endif
+       __rk_platform_add_display_devices(fb,lcdc0,lcdc1,bl);
+
+       return 0;
+       
+}
+
+// i2c
+#ifdef CONFIG_I2C0_RK30
+static struct i2c_board_info __initdata i2c0_info[] = {
+#if defined (CONFIG_GS_MMA8452)
+       {
+               .type           = "gs_mma8452",
+               .addr           = 0x1d,
+               .flags          = 0,
+               .irq            = MMA8452_INT_PIN,
+               .platform_data = &mma8452_info,
+       },
+#endif
+#if defined (CONFIG_GS_LIS3DH)
+       {
+               .type           = "gs_lis3dh",
+               .addr           = 0x19,   //0x19(SA0-->VCC), 0x18(SA0-->GND)
+               .flags          = 0,
+               .irq            = LIS3DH_INT_PIN,
+               .platform_data = &lis3dh_info,
+       },
+#endif
+#if defined (CONFIG_COMPASS_AK8975)
+       {
+               .type          = "ak8975",
+               .addr          = 0x0d,
+               .flags         = 0,
+               .irq           = RK30_PIN3_PD7, 
+               .platform_data = &akm8975_info,
+       },
+#endif
+#if defined (CONFIG_GYRO_L3G4200D)
+       {
+               .type          = "l3g4200d_gryo",
+               .addr          = 0x69,
+               .flags         = 0,
+               .irq           = L3G4200D_INT_PIN,
+               .platform_data = &l3g4200d_info,
+       },
+#endif
+#if defined (CONFIG_SND_SOC_RK1000)
+       {
+               .type          = "rk1000_i2c_codec",
+               .addr          = 0x60,
+               .flags         = 0,
+       },
+       {
+               .type          = "rk1000_control",
+               .addr          = 0x40,
+               .flags         = 0,
+       },
+#endif
+#if defined (CONFIG_SND_SOC_RT5631)
+        {
+                .type                   = "rt5631",
+                .addr                   = 0x1a,
+                .flags                  = 0,
+        },
+#endif
+
+#ifdef CONFIG_MFD_RK610
+               {
+                       .type                   = "rk610_ctl",
+                       .addr                   = 0x40,
+                       .flags                  = 0,
+                       .platform_data          = &rk610_ctl_pdata,
+               },
+#ifdef CONFIG_RK610_TVOUT
+               {
+                       .type                   = "rk610_tvout",
+                       .addr                   = 0x42,
+                       .flags                  = 0,
+               },
+#endif
+#ifdef CONFIG_HDMI_RK610
+               {
+                       .type                   = "rk610_hdmi",
+                       .addr                   = 0x46,
+                       .flags                  = 0,
+                       .irq                    = INVALID_GPIO,
+               },
+#endif
+#ifdef CONFIG_SND_SOC_RK610
+               {//RK610_CODEC addr  from 0x60 to 0x80 (0x60~0x80)
+                       .type                   = "rk610_i2c_codec",
+                       .addr                   = 0x60,
+                       .flags                  = 0,
+                       .platform_data          = &rk610_codec_pdata,                                   
+               },
+#endif
+#endif
+
+};
+#endif
+
+int __sramdata g_pmic_type =  0;
+#ifdef CONFIG_I2C1_RK30
+#ifdef CONFIG_MFD_WM831X_I2C
+#define PMU_POWER_SLEEP                RK30_PIN0_PA1 
+
+static struct pmu_info  wm8326_dcdc_info[] = {
+       {
+               .name          = "vdd_core",   //logic
+               .min_uv          = 1000000,
+               .max_uv         = 1000000,
+               .suspend_vol  =  950000,
+       },
+       {
+               .name          = "vdd_cpu",    //arm
+               .min_uv          = 1000000,
+               .max_uv         = 1000000,
+               .suspend_vol  =  950000,
+       },
+       {
+               .name          = "dcdc3",   //ddr
+               .min_uv          = 1150000,
+               .max_uv         = 1150000,
+               .suspend_vol  =  1150000,
+       },
+       #ifdef CONFIG_MACH_RK3066_SDK
+       {
+               .name          = "dcdc4",   //vcc_io
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+               .suspend_vol  =  3000000,
+       },
+       #else
+       {
+               .name          = "dcdc4",   //vcc_io
+               .min_uv          = 3000000,
+               .max_uv         = 3000000,
+               .suspend_vol  =  2800000,
+       },
+       #endif
+};
+
+static struct pmu_info  wm8326_ldo_info[] = {
+       {
+               .name          = "ldo1",   //vcc18_cif
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+               .suspend_vol  =  1800000,
+       },
+       {
+               .name          = "ldo2",    //vccio_wl
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+               .suspend_vol  =  1800000,
+       },
+       {
+               .name          = "ldo3",   //
+               .min_uv          = 1100000,
+               .max_uv         = 1100000,
+               .suspend_vol  =  1100000,
+       },
+       {
+               .name          = "ldo4",   //vdd11
+               .min_uv          = 1000000,
+               .max_uv         = 1000000,
+               .suspend_vol  =  1000000,
+       },
+       {
+               .name          = "ldo5",   //vcc25
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+               .suspend_vol  =  1800000,
+       },
+       {
+               .name          = "ldo6",   //vcc33
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+               .suspend_vol  =  3300000,
+       },
+       {
+               .name          = "ldo7",   //vcc28_cif
+               .min_uv          = 2800000,
+               .max_uv         = 2800000,
+               .suspend_vol  =  2800000,
+       },
+       {
+               .name          = "ldo8",   //vcca33
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+               .suspend_vol  =  3300000,
+       },
+       {
+               .name          = "ldo9",   //vcc_tp
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+               .suspend_vol  =  3300000,
+       },
+       {
+               .name          = "ldo10",   //flash_io
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+               .suspend_vol  =  1800000,
+       },
+};
+
+#include "board-pmu-wm8326.c"
+#endif
+
+#ifdef CONFIG_MFD_TPS65910
+#define TPS65910_HOST_IRQ        RK30_PIN0_PB3
+
+#define PMU_POWER_SLEEP RK30_PIN0_PA1
+
+static struct pmu_info  tps65910_dcdc_info[] = {
+       {
+               .name          = "vdd_core",   //logic
+               .min_uv          = 1100000,
+               .max_uv         = 1100000,
+       },
+       {
+               .name          = "vdd2",    //ddr
+               .min_uv          = 1200000,
+               .max_uv         = 1200000,
+       },
+       {
+               .name          = "vio",   //vcc_io
+               .min_uv          = 2500000,
+               .max_uv         = 2500000,
+       },
+       
+};
+static  struct pmu_info  tps65910_ldo_info[] = {
+       {
+               .name          = "vpll",   //vdd10
+               .min_uv          = 1000000,
+               .max_uv         = 1000000,
+       },
+       {
+               .name          = "vdig1",    //vcc18_cif
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+       },
+       {
+               .name          = "vdig2",   //vdd_jetta
+               .min_uv          = 1200000,
+               .max_uv         = 1200000,
+       },
+       {
+               .name          = "vaux1",   //vcc28_cif
+               .min_uv          = 2800000,
+               .max_uv         = 2800000,
+       },
+       {
+               .name          = "vaux2",   //vcca33
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+       },
+       {
+               .name          = "vaux33",   //vcc_tp
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+       },
+       {
+               .name          = "vmmc",   //vcc30
+               .min_uv          = 3000000,
+               .max_uv         = 3000000,
+       },
+       {
+               .name          = "vdac",   //vcc18
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+       },
+ };
+
+#include "board-pmu-tps65910.c"
+#endif
+
+#ifdef CONFIG_REGULATOR_ACT8846
+#define PMU_POWER_SLEEP RK30_PIN0_PA1
+#define PMU_VSEL RK30_PIN3_PD3
+static struct pmu_info  act8846_dcdc_info[] = {
+       {
+               .name          = "act_dcdc1",   //ddr
+               .min_uv          = 1200000,
+               .max_uv         = 1200000,
+               .suspend_vol  =  1200000,
+       },
+       {
+               .name          = "vdd_core",    //logic
+               .min_uv          = 1000000,
+               .max_uv         = 1000000,
+               #ifdef CONFIG_ACT8846_SUPPORT_RESET
+               .suspend_vol  =  1200000,
+               #else
+               .suspend_vol  =  900000,
+               #endif
+
+       },
+       {
+               .name          = "vdd_cpu",   //arm
+               .min_uv          = 1000000,
+               .max_uv         = 1000000,
+               #ifdef CONFIG_ACT8846_SUPPORT_RESET
+               .suspend_vol  =  1200000,
+               #else
+               .suspend_vol  =  900000,
+               #endif
+
+       },
+       {
+               .name          = "act_dcdc4",   //vccio
+               .min_uv          = 3000000,
+               .max_uv         = 3000000,
+               #ifdef CONFIG_ACT8846_SUPPORT_RESET
+               .suspend_vol  =  3000000,
+               #else
+               .suspend_vol  =  2800000,
+               #endif
+
+       },
+       
+};
+static  struct pmu_info  act8846_ldo_info[] = {
+       {
+               .name          = "act_ldo1",   //vdd11
+               .min_uv          = 1000000,
+               .max_uv         = 1000000,
+       },
+       {
+               .name          = "act_ldo2",    //vdd12
+               .min_uv          = 1200000,
+               .max_uv         = 1200000,
+       },
+       {
+               .name          = "act_ldo3",   //vcc18_cif
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+       },
+       {
+               .name          = "act_ldo4",   //vcca33
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+       },
+       {
+               .name          = "act_ldo5",   //vcctp
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+       },
+       {
+               .name          = "act_ldo6",   //vcc33
+               .min_uv          = 3300000,
+               .max_uv         = 3300000,
+       },
+       {
+               .name          = "act_ldo7",   //vccio_wl
+               .min_uv          = 1800000,
+               .max_uv         = 1800000,
+       },
+       {
+               .name          = "act_ldo8",   //vcc28_cif
+               .min_uv          = 2800000,
+               .max_uv         = 2800000,
+       },
+ };
+
+#include "board-pmu-act8846.c"
+#endif
+
+
+static struct i2c_board_info __initdata i2c1_info[] = {
+#if defined (CONFIG_MFD_WM831X_I2C)
+       {
+               .type          = "wm8326",
+               .addr          = 0x34,
+               .flags         = 0,
+               .irq           = RK30_PIN0_PB3,
+               .platform_data = &wm831x_platdata,
+       },
+#endif
+#if defined (CONFIG_MFD_TPS65910)
+       {
+        .type           = "tps65910",
+        .addr           = TPS65910_I2C_ID0,
+        .flags          = 0,
+        .irq            = TPS65910_HOST_IRQ,
+       .platform_data = &tps65910_data,
+       },
+#endif
+
+#if defined (CONFIG_REGULATOR_ACT8846)
+       {
+               .type                   = "act8846",
+               .addr           = 0x5a, 
+               .flags                  = 0,
+       //      .irq            = ACT8846_HOST_IRQ,
+               .platform_data=&act8846_data,
+       },
+#endif
+#if defined (CONFIG_RTC_HYM8563)
+       {
+               .type                   = "rtc_hym8563",
+               .addr           = 0x51,
+               .flags                  = 0,
+               .irq            = RK30_PIN1_PA4,
+       },
+#endif
+
+};
+#endif
+
+void __sramfunc board_pmu_suspend(void)
+{      
+       #if defined (CONFIG_MFD_WM831X_I2C)
+       if(pmic_is_wm8326())
+       board_pmu_wm8326_suspend();
+       #endif
+       #if defined (CONFIG_MFD_TPS65910)
+       if(pmic_is_tps65910())
+       board_pmu_tps65910_suspend(); 
+    #endif   
+       #if defined (CONFIG_REGULATOR_ACT8846)
+       if(pmic_is_act8846())
+       board_pmu_act8846_suspend(); 
+       #endif   
+
+}
+
+void __sramfunc board_pmu_resume(void)
+{      
+       #if defined (CONFIG_MFD_WM831X_I2C)
+       if(pmic_is_wm8326())
+       board_pmu_wm8326_resume();
+       #endif
+       #if defined (CONFIG_MFD_TPS65910)
+       if(pmic_is_tps65910())
+       board_pmu_tps65910_resume(); 
+       #endif
+       #if defined (CONFIG_REGULATOR_ACT8846)
+       if(pmic_is_act8846())
+       board_pmu_act8846_resume(); 
+       #endif   
+}
+
+ int __sramdata gpio3d6_iomux,gpio3d6_do,gpio3d6_dir,gpio3d6_en;
+
+#define grf_readl(offset)      readl_relaxed(RK30_GRF_BASE + offset)
+#define grf_writel(v, offset)  do { writel_relaxed(v, RK30_GRF_BASE + offset); dsb(); } while (0)
+ 
+void __sramfunc rk30_pwm_logic_suspend_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+
+//     int gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
+       sram_udelay(10000);
+       gpio3d6_iomux = grf_readl(GRF_GPIO3D_IOMUX);
+       gpio3d6_do = grf_readl(GRF_GPIO3H_DO);
+       gpio3d6_dir = grf_readl(GRF_GPIO3H_DIR);
+       gpio3d6_en = grf_readl(GRF_GPIO3H_EN);
+
+       grf_writel((1<<28), GRF_GPIO3D_IOMUX);
+       grf_writel((1<<30)|(1<<14), GRF_GPIO3H_DIR);
+       grf_writel((1<<30)|(1<<14), GRF_GPIO3H_DO);
+       grf_writel((1<<30)|(1<<14), GRF_GPIO3H_EN);
+#endif 
+}
+void __sramfunc rk30_pwm_logic_resume_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+       grf_writel((1<<28)|gpio3d6_iomux, GRF_GPIO3D_IOMUX);
+       grf_writel((1<<30)|gpio3d6_en, GRF_GPIO3H_EN);
+       grf_writel((1<<30)|gpio3d6_dir, GRF_GPIO3H_DIR);
+       grf_writel((1<<30)|gpio3d6_do, GRF_GPIO3H_DO);
+       sram_udelay(10000);
+
+#endif
+
+}
+extern void pwm_suspend_voltage(void);
+extern void pwm_resume_voltage(void);
+void  rk30_pwm_suspend_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+       pwm_suspend_voltage();
+#endif
+}
+void  rk30_pwm_resume_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+       pwm_resume_voltage();
+#endif
+}
+
+
+#ifdef CONFIG_I2C2_RK30
+static struct i2c_board_info __initdata i2c2_info[] = {
+#if defined (CONFIG_TOUCHSCREEN_GT8XX)
+       {
+               .type          = "Goodix-TS",
+               .addr          = 0x55,
+               .flags         = 0,
+               .irq           = RK30_PIN1_PB7,
+               .platform_data = &goodix_info,
+       },
+#endif
+#if defined (CONFIG_LS_CM3217)
+       {
+               .type          = "lightsensor",
+               .addr          = 0x10,
+               .flags         = 0,
+               .platform_data = &cm3217_info,
+       },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C3_RK30
+static struct i2c_board_info __initdata i2c3_info[] = {
+};
+#endif
+
+#ifdef CONFIG_I2C4_RK30
+static struct i2c_board_info __initdata i2c4_info[] = {
+};
+#endif
+
+#ifdef CONFIG_I2C_GPIO_RK30
+#define I2C_SDA_PIN     INVALID_GPIO// RK30_PIN2_PD6   //set sda_pin here
+#define I2C_SCL_PIN     INVALID_GPIO//RK30_PIN2_PD7   //set scl_pin here
+static int rk30_i2c_io_init(void)
+{
+        //set iomux (gpio) here
+        //rk30_mux_api_set(GPIO2D7_I2C1SCL_NAME, GPIO2D_GPIO2D7);
+        //rk30_mux_api_set(GPIO2D6_I2C1SDA_NAME, GPIO2D_GPIO2D6);
+
+        return 0;
+}
+struct i2c_gpio_platform_data default_i2c_gpio_data = {
+       .sda_pin = I2C_SDA_PIN,
+       .scl_pin = I2C_SCL_PIN,
+       .udelay = 5, // clk = 500/udelay = 100Khz
+       .timeout = 100,//msecs_to_jiffies(100),
+       .bus_num    = 5,
+       .io_init = rk30_i2c_io_init,
+};
+static struct i2c_board_info __initdata i2c_gpio_info[] = {
+};
+#endif
+
+static void __init rk30_i2c_register_board_info(void)
+{
+#ifdef CONFIG_I2C0_RK30
+       i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
+#endif
+#ifdef CONFIG_I2C1_RK30
+       i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
+#endif
+#ifdef CONFIG_I2C2_RK30
+       i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
+#endif
+#ifdef CONFIG_I2C3_RK30
+       i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
+#endif
+#ifdef CONFIG_I2C4_RK30
+       i2c_register_board_info(4, i2c4_info, ARRAY_SIZE(i2c4_info));
+#endif
+#ifdef CONFIG_I2C_GPIO_RK30
+       i2c_register_board_info(5, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
+#endif
+}
+//end of i2c
+
+// ========== Begin of rk3168 top board keypad defination ============
+
+#include <plat/key.h>
+
+static struct rk29_keys_button key_button[] = {
+        {
+                .desc   = "vol-",
+                .code   = KEY_VOLUMEDOWN,
+               .adc_value      = 747,
+                .gpio   = INVALID_GPIO,
+                .active_low = PRESS_LEV_LOW,
+        },
+        {
+                .desc   = "play",
+                .code   = KEY_POWER,
+                .gpio   = RK30_PIN0_PA4,
+                .active_low = PRESS_LEV_LOW,
+                .wakeup = 1,
+        },
+        {
+                .desc   = "vol+",
+                .code   = KEY_VOLUMEUP,
+                .adc_value      = 559,//133
+                .gpio = INVALID_GPIO,
+                .active_low = PRESS_LEV_LOW,
+        },
+       {
+                .desc   = "menu",
+                .code   = EV_MENU,
+                .adc_value      = 1,
+                .gpio = INVALID_GPIO,
+                .active_low = PRESS_LEV_LOW,
+        },
+        {
+                .desc   = "home",
+                .code   = KEY_HOME,
+                .adc_value      = 355,//550
+                .gpio = INVALID_GPIO,
+                .active_low = PRESS_LEV_LOW,
+        },
+        {
+                .desc   = "esc",
+                .code   = KEY_BACK,
+                .adc_value      = 171,//333
+               .gpio = INVALID_GPIO,
+               .active_low = PRESS_LEV_LOW,
+       },
+       {
+               .desc   = "camera",
+               .code   = KEY_CAMERA,
+               .adc_value      = 742,
+               .gpio = INVALID_GPIO,
+               .active_low = PRESS_LEV_LOW,
+       },
+};
+struct rk29_keys_platform_data rk29_keys_pdata = {
+       .buttons        = key_button,
+       .nbuttons       = ARRAY_SIZE(key_button),
+       .chn    = 1,  //chn: 0-7, if do not use ADC,set 'chn' -1
+};
+
+// =========== End of rk3168 top board keypad defination  =============
+
+
+#define POWER_ON_PIN RK30_PIN0_PA0   //power_hold
+static void rk30_pm_power_off(void)
+{
+       printk(KERN_ERR "rk30_pm_power_off start...\n");
+       #if defined(CONFIG_MFD_WM831X)
+       if(pmic_is_wm8326()){
+               wm831x_set_bits(Wm831x,WM831X_GPIO_LEVEL,0x0001,0x0000);  //set sys_pwr 0
+               wm831x_device_shutdown(Wm831x);//wm8326 shutdown
+        }
+       #endif
+
+       #if defined(CONFIG_REGULATOR_ACT8846)
+        if(pmic_is_act8846())
+        {
+               act8846_device_shutdown();
+        }
+       #endif
+       
+       #if defined(CONFIG_MFD_TPS65910)        
+       if(pmic_is_tps65910())
+       {
+               tps65910_device_shutdown();//tps65910 shutdown
+       }
+       #endif
+
+       gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
+       while (1);
+}
+
+static void __init machine_rk30_board_init(void)
+{
+       //avs_init();
+       gpio_request(POWER_ON_PIN, "poweronpin");
+       gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
+       
+       pm_power_off = rk30_pm_power_off;
+       
+        gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
+
+
+       rk30_i2c_register_board_info();
+       spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
+       platform_add_devices(devices, ARRAY_SIZE(devices));
+       rk_platform_add_display_devices();
+       board_usb_detect_init(RK30_PIN0_PA7);
+
+#if defined(CONFIG_WIFI_CONTROL_FUNC)
+       rk29sdk_wifi_bt_gpio_control_init();
+#elif defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+    //rk29sdk_wifi_combo_module_gpio_init();
+#endif
+
+#if defined(CONFIG_MT6620)
+    clk_set_rate(clk_get_sys("rk_serial.0", "uart"), 48*1000000);
+#endif
+}
+
+static void __init rk30_reserve(void)
+{
+#ifdef CONFIG_ION
+       rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
+#endif
+#ifdef CONFIG_FB_ROCKCHIP
+       resource_fb[0].start = board_mem_reserve_add("fb0 buf", get_fb_size());
+       resource_fb[0].end = resource_fb[0].start + get_fb_size()- 1;
+#if 0
+       resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
+       resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
+#endif
+
+#if defined(CONFIG_FB_ROTATE) || !defined(CONFIG_THREE_FB_BUFFER)
+       resource_fb[2].start = board_mem_reserve_add("fb2 buf",get_fb_size());
+       resource_fb[2].end = resource_fb[2].start + get_fb_size() - 1;
+#endif
+#endif
+
+#ifdef CONFIG_VIDEO_RK29
+       rk30_camera_request_reserve_mem();
+#endif
+       
+#ifdef CONFIG_GPS_RK
+       //it must be more than 8MB
+       rk_gps_info.u32MemoryPhyAddr = board_mem_reserve_add("gps", SZ_8M);
+#endif
+       board_mem_reserved();
+}
+
+/**
+ * dvfs_cpu_logic_table: table for arm and logic dvfs 
+ * @frequency  : arm frequency
+ * @cpu_volt   : arm voltage depend on frequency
+ */
+static struct cpufreq_frequency_table dvfs_arm_table[] = {
+        {.frequency = 312 * 1000,       .index = 850 * 1000},
+        {.frequency = 504 * 1000,       .index = 900 * 1000},
+        {.frequency = 816 * 1000,       .index = 950 * 1000},
+        {.frequency = 1008 * 1000,      .index = 1025 * 1000},
+        {.frequency = 1200 * 1000,      .index = 1100 * 1000},
+        {.frequency = 1416 * 1000,      .index = 1200 * 1000},
+        {.frequency = 1608 * 1000,      .index = 1300 * 1000},
+        {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_gpu_table[] = {     
+#if defined(CONFIG_ARCH_RK3188)
+        {.frequency = 133 * 1000,       .index = 975 * 1000},//the mininum rate is limited 133M for rk3188
+#elif defined(CONFIG_ARCH_RK3066B)
+       {.frequency = 100 * 1000,       .index = 950 * 1000},//the minimum rate is no limit for rk3168 rk3066B
+#endif
+
+       {.frequency = 200 * 1000,       .index = 975 * 1000},
+       {.frequency = 266 * 1000,       .index = 1000 * 1000},
+       {.frequency = 300 * 1000,       .index = 1050 * 1000},
+       {.frequency = 400 * 1000,       .index = 1100 * 1000},
+       {.frequency = 600 * 1000,       .index = 1200 * 1000},
+        {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_ddr_table[] = {
+#if defined(CONFIG_ARCH_RK3188)
+       {.frequency = 200 * 1000 + DDR_FREQ_SUSPEND,    .index = 950 * 1000},
+       {.frequency = 300 * 1000 + DDR_FREQ_VIDEO,      .index = 1000 * 1000},
+#endif
+       {.frequency = 396 * 1000 + DDR_FREQ_NORMAL,     .index = 1100 * 1000},
+       {.frequency = CPUFREQ_TABLE_END},
+};
+
+//#define DVFS_CPU_TABLE_SIZE  (ARRAY_SIZE(dvfs_cpu_logic_table))
+//static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE];
+//static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE];
+
+void __init board_clock_init(void)
+{
+       rk30_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
+       //dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);    
+       dvfs_set_freq_volt_table(clk_get(NULL, "cpu"), dvfs_arm_table);
+       dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
+       dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
+}
+
+MACHINE_START(RK30, "RK30board")
+       .boot_params    = PLAT_PHYS_OFFSET + 0x800,
+       .fixup          = rk30_fixup,
+       .reserve        = &rk30_reserve,
+       .map_io         = rk30_map_io,
+       .init_irq       = rk30_init_irq,
+       .timer          = &rk30_timer,
+       .init_machine   = machine_rk30_board_init,
+MACHINE_END