[libata] replace sata_settings with devslp_timing
authorShane Huang <shane.huang@amd.com>
Mon, 17 Dec 2012 15:18:59 +0000 (23:18 +0800)
committerJeff Garzik <jgarzik@redhat.com>
Mon, 14 Jan 2013 18:29:15 +0000 (13:29 -0500)
NCQ capability was used to check availability of SATA Settings page
from Identify Device Data Log, which contains DevSlp timing variables.
It does not work on some HDDs and leads to error messages.

IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either
because it is only the sufficient condition of Identify Device data
log, not the necessary condition.

This patch replaced ata_device->sata_settings with ->devslp_timing
to only save DevSlp timing variables(8 bytes), instead of the whole
SATA Settings page(512 bytes).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/libahci.c
drivers/ata/libata-core.c
include/linux/ata.h
include/linux/libata.h

index 320712a7b9eaac3174f3a96de8693b63dee5f1af..6cd7805e47cac96b6a2e6fe07444d7c491a7e45d 100644 (file)
@@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
        /* Use the nominal value 10 ms if the read MDAT is zero,
         * the nominal value of DETO is 20 ms.
         */
-       if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] &
+       if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] &
            ATA_LOG_DEVSLP_VALID_MASK) {
-               mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] &
+               mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] &
                       ATA_LOG_DEVSLP_MDAT_MASK;
                if (!mdat)
                        mdat = 10;
-               deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO];
+               deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO];
                if (!deto)
                        deto = 20;
        } else {
index 9e8b99af400dc53539ba4e8d45d36696e4818b65..46cd3f4c6aaaf8122c82ea8f60f7e6bcbaf435c6 100644 (file)
@@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev)
                        }
                }
 
-               /* check and mark DevSlp capability */
-               if (ata_id_has_devslp(dev->id))
-                       dev->flags |= ATA_DFLAG_DEVSLP;
-
-               /* Obtain SATA Settings page from Identify Device Data Log,
-                * which contains DevSlp timing variables etc.
-                * Exclude old devices with ata_id_has_ncq()
+               /* Check and mark DevSlp capability. Get DevSlp timing variables
+                * from SATA Settings page of Identify Device Data Log.
                 */
-               if (ata_id_has_ncq(dev->id)) {
+               if (ata_id_has_devslp(dev->id)) {
+                       u8 sata_setting[ATA_SECT_SIZE];
+                       int i, j;
+
+                       dev->flags |= ATA_DFLAG_DEVSLP;
                        err_mask = ata_read_log_page(dev,
                                                     ATA_LOG_SATA_ID_DEV_DATA,
                                                     ATA_LOG_SATA_SETTINGS,
-                                                    dev->sata_settings,
+                                                    sata_setting,
                                                     1);
                        if (err_mask)
                                ata_dev_dbg(dev,
                                            "failed to get Identify Device Data, Emask 0x%x\n",
                                            err_mask);
+                       else
+                               for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
+                                       j = ATA_LOG_DEVSLP_OFFSET + i;
+                                       dev->devslp_timing[i] = sata_setting[j];
+                               }
                }
 
                dev->cdb_len = 16;
index 408da9502177bd18a3ba88e2831701e916e800aa..8f7a3d68371a37314ab8263c078674fd79a8c5b5 100644 (file)
@@ -297,10 +297,12 @@ enum {
        ATA_LOG_SATA_NCQ        = 0x10,
        ATA_LOG_SATA_ID_DEV_DATA  = 0x30,
        ATA_LOG_SATA_SETTINGS     = 0x08,
-       ATA_LOG_DEVSLP_MDAT       = 0x30,
+       ATA_LOG_DEVSLP_OFFSET     = 0x30,
+       ATA_LOG_DEVSLP_SIZE       = 0x08,
+       ATA_LOG_DEVSLP_MDAT       = 0x00,
        ATA_LOG_DEVSLP_MDAT_MASK  = 0x1F,
-       ATA_LOG_DEVSLP_DETO       = 0x31,
-       ATA_LOG_DEVSLP_VALID      = 0x37,
+       ATA_LOG_DEVSLP_DETO       = 0x01,
+       ATA_LOG_DEVSLP_VALID      = 0x07,
        ATA_LOG_DEVSLP_VALID_MASK = 0x80,
 
        /* READ/WRITE LONG (obsolete) */
index 83ba0ab2c915c1bdb66fc7c922343b3f027ad120..649e5f86b5f00928b94e9f8515bf18f286e6b6e4 100644 (file)
@@ -652,8 +652,8 @@ struct ata_device {
                u32             gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
        };
 
-       /* Identify Device Data Log (30h), SATA Settings (page 08h) */
-       u8                      sata_settings[ATA_SECT_SIZE];
+       /* DEVSLP Timing Variables from Identify Device Data Log */
+       u8                      devslp_timing[ATA_LOG_DEVSLP_SIZE];
 
        /* error history */
        int                     spdn_cnt;