if edp_panel add disp_timings, it will conflict with mipi_panel.
Change-Id: Ic6d9bcb5f38670d203ca9c220354f1ac476ccbfb
Signed-off-by: xubilv <xbl@rock-chips.com>
rk3229-evb.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
- rk3288-evb-rk818.dtb \
+ rk3288-evb-rk818-edp.dtb \
+ rk3288-evb-rk818-mipi.dtb \
rk3288-fennec.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
compatible = "rockchip,rk3288-secure-efuse";
};
-&mipi_dsi {
- dsi_panel: dsi-panel {
- compatible = "simple-panel-dsi";
- reg = <0>;
- backlight = <&backlight>;
- enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
- power-supply = <&vcc_lcd>;
- dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST)>;
- dsi,format = <MIPI_DSI_FMT_RGB888>;
- dsi,lanes = <4>;
- delay,prepare = <120>;
- status = "disabled";
-
- disp_timings: display-timings {
- native-mode = <&timing0>;
-
- timing0: timing0 {
- clock-frequency = <150000000>;
- hactive = <1200>;
- vactive = <1920>;
- hback-porch = <80>;
- hfront-porch = <81>;
- vback-porch = <21>;
- vfront-porch = <21>;
- hsync-len = <10>;
- vsync-len = <3>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <0>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
&rga {
compatible = "rockchip,rga2";
clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
rockchip,usb-mode = <0>;
};
-&edp {
- status = "okay";
-};
-
-&edp_phy {
- status = "okay";
-};
-
-&edp_panel {
- status = "okay";
-};
-
-&dsi_panel {
- status = "disabled";
-};
-
-&mipi_dsi {
- status = "disabled";
-};
-
-&route_mipi {
- status = "disabled";
-};
-
&pinctrl {
backlight {
--- /dev/null
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+#include "rk3288-android.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288-evb-rk818", "rockchip,rk3288";
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk818 1>;
+ clock-names = "ext_clock";
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless-bluetooth {
+ clocks = <&rk818 1>;
+ clock-names = "ext_clock";
+ };
+
+ /delete-node/ sdmmc-regulator;
+
+ vcc_lcd: vcc-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ regulator-name = "vcc_lcd";
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&edp {
+ status = "okay";
+};
+
+&edp_panel {
+ compatible ="lg,lp079qx1-sp0v", "simple-panel";
+ enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&lcd_cs>;
+ power-supply = <&vcc_lcd>;
+ status = "okay";
+};
+
+&edp_phy {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&vdd_gpu>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ vin-supply = <&vcc_sys>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-state = <3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk818: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ status = "okay";
+
+ clock-output-names = "xin32k", "wifibt_32kin";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc_io>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_codec: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_pmu: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_wl: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_sd: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: SWITCH_REG {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ mpu6050@68 {
+ compatible = "invensense,mpu6050";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6050_irq_gpio>;
+ reg = <0x68>;
+ irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
+ mpu-int_config = <0x10>;
+ mpu-level_shifter = <0>;
+ mpu-orientation = <0 1 0 1 0 0 0 0 1>;
+ orientation-x= <0>;
+ orientation-y= <1>;
+ orientation-z= <0>;
+ support-hw-poweroff = <1>;
+ mpu-debug = <1>;
+ };
+};
+
+&lvds_panel {
+ power-supply = <&vcc_lcd>;
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ pinctrl-1 = <&otp_gpio>;
+};
+
+&pinctrl {
+ lcd {
+ lcd_en: lcd-en {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ mpu6050 {
+ mpu6050_irq_gpio: mpu6050-irq-gpio {
+ rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+#include "rk3288-android.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288-evb-rk818", "rockchip,rk3288";
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk818 1>;
+ clock-names = "ext_clock";
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless-bluetooth {
+ clocks = <&rk818 1>;
+ clock-names = "ext_clock";
+ };
+
+ /delete-node/ sdmmc-regulator;
+
+ vcc_lcd: vcc-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ regulator-name = "vcc_lcd";
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&edp_panel {
+ power-supply = <&vcc_lcd>;
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&vdd_gpu>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ vin-supply = <&vcc_sys>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-state = <3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk818: pmic@1c {
+ compatible = "rockchip,rk818";
+ reg = <0x1c>;
+ status = "okay";
+
+ clock-output-names = "xin32k", "wifibt_32kin";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc_io>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_codec: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_pmu: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_wl: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_sd: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: SWITCH_REG {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ mpu6050@68 {
+ compatible = "invensense,mpu6050";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6050_irq_gpio>;
+ reg = <0x68>;
+ irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
+ mpu-int_config = <0x10>;
+ mpu-level_shifter = <0>;
+ mpu-orientation = <0 1 0 1 0 0 0 0 1>;
+ orientation-x= <0>;
+ orientation-y= <1>;
+ orientation-z= <0>;
+ support-hw-poweroff = <1>;
+ mpu-debug = <1>;
+ };
+};
+
+&lvds_panel {
+ power-supply = <&vcc_lcd>;
+};
+
+&mipi_dsi {
+ status = "okay";
+
+ dsi_panel: dsi_panel {
+ compatible = "simple-panel-dsi";
+ reg = <0>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vcc_lcd>;
+ dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST)>;
+ dsi,format = <MIPI_DSI_FMT_RGB888>;
+ dsi,lanes = <4>;
+ delay,prepare = <120>;
+ status = "okay";
+
+ disp_timings: display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing0 {
+ clock-frequency = <150000000>;
+ hactive = <1200>;
+ vactive = <1920>;
+ hback-porch = <80>;
+ hfront-porch = <81>;
+ vback-porch = <21>;
+ vfront-porch = <21>;
+ hsync-len = <10>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&route_mipi {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ pinctrl-1 = <&otp_gpio>;
+};
+
+&pinctrl {
+ lcd {
+ lcd_en: lcd-en {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ mpu6050 {
+ mpu6050_irq_gpio: mpu6050-irq-gpio {
+ rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+++ /dev/null
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-#include "rk3288-android.dtsi"
-
-/ {
- compatible = "rockchip,rk3288-evb-rk818", "rockchip,rk3288";
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk818 1>;
- clock-names = "ext_clock";
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
- };
-
- wireless-bluetooth {
- clocks = <&rk818 1>;
- clock-names = "ext_clock";
- };
-
- /delete-node/ sdmmc-regulator;
-
- vcc_lcd: vcc-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_en>;
- regulator-name = "vcc_lcd";
- vin-supply = <&vcc_io>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&edp_panel {
- power-supply = <&vcc_lcd>;
-};
-
-&gpu {
- status = "okay";
- mali-supply = <&vdd_gpu>;
-};
-
-&i2c0 {
- clock-frequency = <400000>;
-
- vdd_cpu: syr827@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- vin-supply = <&vcc_sys>;
- regulator-compatible = "fan53555-reg";
- pinctrl-0 = <&vsel1_gpio>;
- vsel-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- regulator-initial-state = <3>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk818: pmic@1c {
- compatible = "rockchip,rk818";
- reg = <0x1c>;
- status = "okay";
-
- clock-output-names = "xin32k", "wifibt_32kin";
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_sys>;
- vcc9-supply = <&vcc_io>;
-
- regulators {
- vdd_logic: DCDC_REG1 {
- regulator-name = "vdd_logic";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1250000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-name = "vdd_gpu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1250000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_codec: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcca_codec";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_tp: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_tp";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_lcd: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_pmu: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_pmu";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_wl: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_wl";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vccio_sd: LDO_REG9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_sd: SWITCH_REG {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <400000>;
-
- mpu6050@68 {
- compatible = "invensense,mpu6050";
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&mpu6050_irq_gpio>;
- reg = <0x68>;
- irq-gpio = <&gpio8 0 IRQ_TYPE_EDGE_RISING>;
- mpu-int_config = <0x10>;
- mpu-level_shifter = <0>;
- mpu-orientation = <0 1 0 1 0 0 0 0 1>;
- orientation-x= <0>;
- orientation-y= <1>;
- orientation-z= <0>;
- support-hw-poweroff = <1>;
- mpu-debug = <1>;
- };
-};
-
-&lvds_panel {
- power-supply = <&vcc_lcd>;
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- pinctrl-1 = <&otp_gpio>;
-};
-
-&pinctrl {
- lcd {
- lcd_en: lcd-en {
- rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- mpu6050 {
- mpu6050_irq_gpio: mpu6050-irq-gpio {
- rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- vsel1_gpio: vsel1-gpio {
- rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-};
};
edp_panel: edp-panel {
- compatible ="lg,lp079qx1-sp0v", "simple-panel";
- enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&lcd_cs>;
status = "disabled";
ports {
supports-sd;
};
-&edp_phy {
- status = "okay";
-};
-
&edp {
force-hpd;
- status = "okay";
+ status = "disabled";
ports {
edp_out: port@1 {
projects / firefly-linux-kernel-4.4.55.git / commitdiff