ARM: MX3: add SPI devices for mx31lite
authorDaniel Mack <daniel@caiaq.de>
Thu, 19 Nov 2009 11:02:08 +0000 (12:02 +0100)
committerSascha Hauer <s.hauer@pengutronix.de>
Thu, 19 Nov 2009 16:11:01 +0000 (17:11 +0100)
Some header files were reordered while I was at it.
The only device currently registered is the ATLAS PMIC (MC13783) chip.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/arm/mach-mx3/mx31lite-db.c
arch/arm/mach-mx3/mx31lite.c

index 45abae1da3358d0784b9f4e3d3740d04b4705aa8..f60cf0813ced72541ab91f09480a5e8c4b5ec999 100644 (file)
@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,6 +40,7 @@
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
 #include <mach/mmc.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -55,6 +57,14 @@ static unsigned int litekit_db_board_pins[] __initdata = {
        MX31_PIN_RTS1__RTS1,
        MX31_PIN_TXD1__TXD1,
        MX31_PIN_RXD1__RXD1,
+       /* SPI 0 */
+       MX31_PIN_CSPI1_SCLK__SCLK,
+       MX31_PIN_CSPI1_MOSI__MOSI,
+       MX31_PIN_CSPI1_MISO__MISO,
+       MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+       MX31_PIN_CSPI1_SS0__SS0,
+       MX31_PIN_CSPI1_SS1__SS1,
+       MX31_PIN_CSPI1_SS2__SS2,
 };
 
 /* UART */
@@ -130,6 +140,19 @@ static struct imxmmc_platform_data mmc_pdata = {
        .exit      = mxc_mmc1_exit,
 };
 
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+       MXC_SPI_CS(0),
+       MXC_SPI_CS(1),
+       MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+       .chipselect     = spi_internal_chipselect,
+       .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
 void __init mx31lite_db_init(void)
 {
        mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
@@ -137,5 +160,6 @@ void __init mx31lite_db_init(void)
                                        "development board pins");
        mxc_register_device(&mxc_uart_device0, &uart_pdata);
        mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+       mxc_register_device(&mxc_spi_device0, &spi0_pdata);
 }
 
index dc993a878161b536b9eb58fe7f95258555526a7f..03762a36d29fb97aed1784adfd5085d04f6989e0 100644 (file)
@@ -2,6 +2,7 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/board-mx31lite.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
+
 #include "devices.h"
 
 /*
 static unsigned int mx31lite_pins[] = {
        /* LAN9117 IRQ pin */
        IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+       /* SPI 1 */
+       MX31_PIN_CSPI2_SCLK__SCLK,
+       MX31_PIN_CSPI2_MOSI__MOSI,
+       MX31_PIN_CSPI2_MISO__MISO,
+       MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+       MX31_PIN_CSPI2_SS0__SS0,
+       MX31_PIN_CSPI2_SS1__SS1,
+       MX31_PIN_CSPI2_SS2__SS2,
 };
 
 static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@@ -83,6 +97,35 @@ static struct platform_device smsc911x_device = {
        },
 };
 
+/*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+       MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+       .chipselect     = spi_internal_chipselect,
+       .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+       .flags  = MC13783_USE_RTC |
+                 MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+       .modalias       = "mc13783",
+       .max_speed_hz   = 1000000,
+       .bus_num        = 1,
+       .chip_select    = 0,
+       .platform_data  = &mc13783_pdata,
+       .irq            = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -131,6 +174,8 @@ static void __init mxc_board_init(void)
                                      "mx31lite");
 
        mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+       mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+       spi_register_board_info(&mc13783_spi_dev, 1);
 
        /* SMSC9117 IRQ pin */
        ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");