ASoC: fsl_sai: Set SYNC bit of TCR2 to Asynchronous Mode

There is one design rule according to SAI's reference manual:
If the transmitter bit clock and frame sync are to be used by both transmitter
and receiver, the transmitter must be configured for asynchronous operation
and the receiver for synchronous operation.

And SYNC of TCR2 is a 2-width control bit:
00 Asynchronous mode.
01 Synchronous with receiver.
10 Synchronous with another SAI transmitter.
11 Synchronous with another SAI receiver.

So the driver should have set SYNC bit of TCR2 to 0x0, and meanwhile set SYNC
bit of RCR2 to 0x1 (Synchronous with transmitter).

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 4c9e71c2f52ac801c0ee2e45921b2d9d2cd5aad0..60fe7c77ba228e672eb47e34c4b8a3641cf09fe1 100644 (file)
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -334,8 +334,7 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
         * Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
         * Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx.
         */
-       regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC,
-                          sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
+       regmap_update_bits(sai->regmap, FSL_SAI_TCR2, FSL_SAI_CR2_SYNC, 0);
        regmap_update_bits(sai->regmap, FSL_SAI_RCR2, FSL_SAI_CR2_SYNC,
                           sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);