treewide: cleanup continuations and remove logging message whitespace

Using C line continuation inside format strings is error prone.
Clean up the unintended whitespace introduced by misuse of \.
Neaten correctly used line continations as well for consistency.

drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well,
but arcmsr needs a lot more work and the driver should likely be
moved to staging instead.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 4268a2bdf1457ee77c37c03e5526c2cafec9b178..74aac96cda2007f9edcd0aea03c9fd40520952a1 100644 (file)
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -153,8 +153,8 @@ static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
        ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
 
        if (ret < 0) {
-               printk(KERN_ERR "%s: failed to register i.MXC CPUfreq \
-                               with error code %d\n", __func__, ret);
+               printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
+                      __func__, ret);
                goto err;
        }
 

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index e0888cb538d4b0ffa65f733065cde71684a11039..8597ff269bfd12152c613dbe3e727c4d86fdea3a 100644 (file)
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -56,8 +56,8 @@ MODULE_PARM_DESC(pq_sources,
 
 static int timeout = 3000;
 module_param(timeout, uint, S_IRUGO);
-MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), \
-               Pass -1 for infinite timeout");
+MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), "
+                "Pass -1 for infinite timeout");
 
 /*
  * Initialization patterns. All bytes in the source buffer has bit 7

diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 6148a1c67895a1d223aa50898d33b775c50b1a27..ce33f462695771a06f6ed1df7c02d4e66502bff4 100644 (file)
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -87,8 +87,8 @@
 #define IBFT_ISCSI_VERSION "0.5.0"
 #define IBFT_ISCSI_DATE "2010-Feb-25"
 
-MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and \
-Konrad Rzeszutek <ketuzsezr@darnok.org>");
+MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and "
+             "Konrad Rzeszutek <ketuzsezr@darnok.org>");
 MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(IBFT_ISCSI_VERSION);

diff --git a/drivers/gpio/ab8500-gpio.c b/drivers/gpio/ab8500-gpio.c
index e7b834d054b779e06b8e4373274012d4327622fa..970053c89ff7a70d80c7536477c8e06e52530951 100644 (file)
--- a/drivers/gpio/ab8500-gpio.c
+++ b/drivers/gpio/ab8500-gpio.c
@@ -482,8 +482,8 @@ static int __devexit ab8500_gpio_remove(struct platform_device *pdev)
 
        ret = gpiochip_remove(&ab8500_gpio->chip);
        if (ret < 0) {
-               dev_err(ab8500_gpio->dev, "unable to remove gpiochip:\
-                               %d\n", ret);
+               dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n",
+                       ret);
                return ret;
        }
 
@@ -516,7 +516,6 @@ static void __exit ab8500_gpio_exit(void)
 module_exit(ab8500_gpio_exit);
 
 MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>");
-MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins\
-                       to be used as GPIO");
+MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO");
 MODULE_ALIAS("AB8500 GPIO driver");
 MODULE_LICENSE("GPL v2");

diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 6083137f0bf87d5c5b1a07408eba01f1b9cd8f4c..9855fbe5927af0ea90096bba716d060541a1b01b 100644 (file)
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -70,8 +70,9 @@
 #include "usbvision.h"
 #include "usbvision-cards.h"
 
-#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, \
-Dwaine Garden <DwaineGarden@rogers.com>"
+#define DRIVER_AUTHOR                                  \
+       "Joerg Heckenbach <joerg@heckenbach-aw.de>, "   \
+       "Dwaine Garden <DwaineGarden@rogers.com>"
 #define DRIVER_NAME "usbvision"
 #define DRIVER_ALIAS "USBVision"
 #define DRIVER_DESC "USBVision USB Video Device Driver for Linux"

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index fa15e853d4e834067eb213d95c3734ef8854894a..7956a10f94885f19cc91dc981c5934fcb494a414 100644 (file)
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -83,19 +83,18 @@ MODULE_VERSION(my_VERSION);
 
 static int mpt_msi_enable_spi;
 module_param(mpt_msi_enable_spi, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \
-               controllers (default=0)");
+MODULE_PARM_DESC(mpt_msi_enable_spi,
+                " Enable MSI Support for SPI controllers (default=0)");
 
 static int mpt_msi_enable_fc;
 module_param(mpt_msi_enable_fc, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
-               controllers (default=0)");
+MODULE_PARM_DESC(mpt_msi_enable_fc,
+                " Enable MSI Support for FC controllers (default=0)");
 
 static int mpt_msi_enable_sas;
 module_param(mpt_msi_enable_sas, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
-               controllers (default=0)");
-
+MODULE_PARM_DESC(mpt_msi_enable_sas,
+                " Enable MSI Support for SAS controllers (default=0)");
 
 static int mpt_channel_mapping;
 module_param(mpt_channel_mapping, int, 0);
@@ -105,15 +104,14 @@ static int mpt_debug_level;
 static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
                  &mpt_debug_level, 0600);
-MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \
-       - (default=0)");
+MODULE_PARM_DESC(mpt_debug_level,
+                " debug level - refer to mptdebug.h - (default=0)");
 
 int mpt_fwfault_debug;
 EXPORT_SYMBOL(mpt_fwfault_debug);
 module_param(mpt_fwfault_debug, int, 0600);
-MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault"
-       " and halt Firmware on fault - (default=0)");
-
+MODULE_PARM_DESC(mpt_fwfault_debug,
+                "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
 
 static char    MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS][50];
 

diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index d07cd67c951c58ac88f3cf070127c795d3f4beae..82fe2d067827b43f3e89ade1afdb9827e2982133 100644 (file)
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -49,8 +49,8 @@ static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
        int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
        if (ret < 0)
                dev_err(&ddata->client->dev,
-                       "i2c_smbus_write_byte_data failed error %d\
-                       Register (%s)\n", ret, msg);
+                       "i2c_smbus_write_byte_data failed error %d Register (%s)\n",
+                       ret, msg);
        return ret;
 }
 
@@ -59,8 +59,8 @@ static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
        int ret = i2c_smbus_read_byte_data(ddata->client, reg);
        if (ret < 0)
                dev_err(&ddata->client->dev,
-                       "i2c_smbus_read_byte_data failed error %d\
-                        Register (%s)\n", ret, msg);
+                       "i2c_smbus_read_byte_data failed error %d Register (%s)\n",
+                       ret, msg);
        return ret;
 }
 

diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index ec3b8c911833de75bf49f2d9847ec673681a3484..7aded90f9daa1683b7a40fa24befed62b26376da 100644 (file)
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -787,8 +787,8 @@ static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
 
        status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
        if (status) {
-               dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
-                               claimed\n", irq);
+               dev_err(&pdev->dev,
+                       "pcie gadget interrupt IRQ%d already claimed\n", irq);
                goto err_iounmap;
        }
 

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 67f40b9c16edb0a15f70f3af6d0efbf57a55c56b..d9951bbc7212ef39d31911172d8f49c0844018d0 100644 (file)
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -83,8 +83,9 @@
 #include "atl1.h"
 
 #define ATLX_DRIVER_VERSION "2.1.3"
-MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
-Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, "
+             "Chris Snook <csnook@redhat.com>, "
+             "Jay Cliburn <jcliburn@gmail.com>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(ATLX_DRIVER_VERSION);
 

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4e5c7a11f04aa5c496dcf7872bb75705c34588a5..a70c512f05d2ef9924298da3b87647a0b13866d0 100644 (file)
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -242,9 +242,8 @@ static int airo_perm = 0555;
 static int proc_perm = 0644;
 
 MODULE_AUTHOR("Benjamin Reed");
-MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
-cards.  Direct support for ISA/PCI/MPI cards and support \
-for PCMCIA when used with airo_cs.");
+MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards.  "
+                  "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
 module_param_array(io, int, NULL, 0);
@@ -252,18 +251,20 @@ module_param_array(irq, int, NULL, 0);
 module_param_array(rates, int, NULL, 0);
 module_param_array(ssids, charp, NULL, 0);
 module_param(auto_wep, int, 0);
-MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \
-the authentication options until an association is made.  The value of \
-auto_wep is number of the wep keys to check.  A value of 2 will try using \
-the key at index 0 and index 1.");
+MODULE_PARM_DESC(auto_wep,
+                "If non-zero, the driver will keep looping through the authentication options until an association is made.  "
+                "The value of auto_wep is number of the wep keys to check.  "
+                "A value of 2 will try using the key at index 0 and index 1.");
 module_param(aux_bap, int, 0);
-MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \
-than seems to work better for older cards with some older buses.  Before \
-switching it checks that the switch is needed.");
+MODULE_PARM_DESC(aux_bap,
+                "If non-zero, the driver will switch into a mode that seems to work better for older cards with some older buses.  "
+                "Before switching it checks that the switch is needed.");
 module_param(maxencrypt, int, 0);
-MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \
-encryption.  Units are in 512kbs.  Zero (default) means there is no limit. \
-Older cards used to be limited to 2mbs (4).");
+MODULE_PARM_DESC(maxencrypt,
+                "The maximum speed that the card can do encryption.  "
+                "Units are in 512kbs.  "
+                "Zero (default) means there is no limit.  "
+                "Older cards used to be limited to 2mbs (4).");
 module_param(adhoc, int, 0);
 MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode.");
 module_param(probe, int, 0);

diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
index 81d6a25eb04f83c1220cccfd6afa3f09fa7b76a3..162d877e6869ce4c4991074b9da24512f2d50eb6 100644 (file)
--- a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
@@ -713,8 +713,8 @@ iwl4965_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
                        iwl4965_find_first_chain(priv->cfg->valid_tx_ant);
                        data->disconn_array[first_chain] = 0;
                        active_chains |= BIT(first_chain);
-                       IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \
-                                       W/A - declare %d as connected\n",
+                       IWL_DEBUG_CALIB(priv,
+                                       "All Tx chains are disconnected W/A - declare %d as connected\n",
                                        first_chain);
                        break;
                }

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index 9006293e740c4110e782f37c424114ad767ddac7..f35ac8ccd52d554ef213141e28bcf17fa03fa362 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -824,8 +824,8 @@ static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
                                find_first_chain(priv->cfg->valid_tx_ant);
                        data->disconn_array[first_chain] = 0;
                        active_chains |= BIT(first_chain);
-                       IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \
-                                       W/A - declare %d as connected\n",
+                       IWL_DEBUG_CALIB(priv,
+                                       "All Tx chains are disconnected W/A - declare %d as connected\n",
                                        first_chain);
                        break;
                }

diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 43410266f9938e4b3f8cc08a51250d860cf0ccba..f57e9c42fdb4e2957ee767d68897ca36e57ae219 100644 (file)
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -405,8 +405,8 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
        switch (buck) {
        case MAX8998_BUCK1:
                dev_dbg(max8998->dev,
-                       "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n\
-                        buck1_vol3:%d, buck1_vol4:%d\n",
+                       "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n"
+                       "buck1_vol3:%d, buck1_vol4:%d\n",
                        i, max8998->buck1_vol[0], max8998->buck1_vol[1],
                        max8998->buck1_vol[2], max8998->buck1_vol[3]);
 

diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
index c3ec0a61d859e72b04d92757af5c548a2fe67b11..891d194ae754e95e43de55b494b8848e236a9040 100644 (file)
--- a/drivers/tty/serial/bfin_sport_uart.c
+++ b/drivers/tty/serial/bfin_sport_uart.c
@@ -296,8 +296,7 @@ static int sport_startup(struct uart_port *port)
                        IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
                        IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) {
                        up->cts_pin = -1;
-                       dev_info(port->dev, "Unable to attach BlackFin UART \
-                               over SPORT CTS interrupt. So, disable it.\n");
+                       dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n");
                }
        }
        if (up->rts_pin >= 0)

diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index c111f36f5d218b72c2154a2e665b1bc3bd734e4e..cab52f4a88b0309fbccb2331fe93d1053a69ca94 100644 (file)
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -49,8 +49,8 @@
 
 static int hsu_dma_enable;
 module_param(hsu_dma_enable, int, 0);
-MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \
-bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
+MODULE_PARM_DESC(hsu_dma_enable,
+                "It is a bitmap to set working mode, if bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode.");
 
 struct hsu_dma_buffer {
        u8              *buf;

diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4f65b14e5e08822a1d0d3fe3e15de24bad94c3ad..448b9d1f0e70acbfd6530dbbcb394f6d601597aa 100644 (file)
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -53,9 +53,10 @@
 /*
  * Version Information
  */
-#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
-Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
-Alan Stern"
+#define DRIVER_AUTHOR                                                  \
+       "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, "             \
+       "Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, "       \
+       "Roman Weissgaerber, Alan Stern"
 #define DRIVER_DESC "USB Universal Host Controller Interface driver"
 
 /* for flakey hardware, ignore overcurrent indicators */

diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 0e5aafda45379e6526b57cd2ff174b836718737a..31645afff5fca25d4b89b9a3d0097ae78d29c2f5 100644 (file)
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -715,8 +715,8 @@ static int ene_ub6250_probe(struct usb_interface *intf,
 
        if (!(misc_reg03 & 0x01)) {
                result = -ENODEV;
-               printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD\
-               card. To use SM/MS card, please build driver/stagging/keucr\n");
+               printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD card. "
+                      "To use SM/MS card, please build driver/staging/keucr\n");
                usb_stor_disconnect(intf);
        }