[PATCH] sky2: more fixes for Yukon Ultra
authorStephen Hemminger <shemminger@osdl.org>
Wed, 17 May 2006 21:37:05 +0000 (14:37 -0700)
committerJeff Garzik <jeff@garzik.org>
Sat, 20 May 2006 04:15:39 +0000 (00:15 -0400)
Logic error in the phy initialization code. Also, turn on wake on lan
bit in status control.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/sky2.c
drivers/net/sky2.h

index 795adfad18bf60694cb32b8ae918b47ab41bc816..bb185e5efa35607821c2149eb175f03464836a5d 100644 (file)
@@ -236,6 +236,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
                }
 
                if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+                       sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
                        sky2_pci_write32(hw, PCI_DEV_REG3, 0);
                        reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
                        reg1 &= P_ASPM_CONTROL_MSK;
@@ -307,7 +308,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
        u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
 
        if (sky2->autoneg == AUTONEG_ENABLE &&
-           (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+           !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
                u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
                ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
index 8012994c9b93213480ac4734d053abb84efdad9a..8a0bc5525f0a64e8024b58d550ed29c4357fc6f4 100644 (file)
@@ -214,6 +214,8 @@ enum csr_regs {
 enum {
        Y2_VMAIN_AVAIL  = 1<<17,/* VMAIN available (YUKON-2 only) */
        Y2_VAUX_AVAIL   = 1<<16,/* VAUX available (YUKON-2 only) */
+       Y2_HW_WOL_ON    = 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
+       Y2_HW_WOL_OFF   = 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */
        Y2_ASF_ENABLE   = 1<<13,/* ASF Unit Enable (YUKON-2 only) */
        Y2_ASF_DISABLE  = 1<<12,/* ASF Unit Disable (YUKON-2 only) */
        Y2_CLK_RUN_ENA  = 1<<11,/* CLK_RUN Enable  (YUKON-2 only) */