ath10k: decouple suspend code
authorMichal Kazior <michal.kazior@tieto.com>
Tue, 16 Jul 2013 07:38:54 +0000 (09:38 +0200)
committerKalle Valo <kvalo@qca.qualcomm.com>
Tue, 30 Jul 2013 15:01:19 +0000 (18:01 +0300)
Split up fw-related and hw-related suspension code.

Although we don't advertise WoW support to
mac80211 yet it's useful to keep the code in
suspend/resume hooks.

At this point there's no need to keep pci pm ops.
In case of WoW mac80211 calls ath10k_suspend()
which should take care of entering low-power mode.
In case WoW is not available mac80211 will go
through regular interface teradown and use start/stop.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
drivers/net/wireless/ath/ath10k/core.c
drivers/net/wireless/ath/ath10k/core.h
drivers/net/wireless/ath/ath10k/hif.h
drivers/net/wireless/ath/ath10k/mac.c
drivers/net/wireless/ath/ath10k/pci.c

index 3d75c6a74fc688b76eba05c7febe4246d77bcb52..01c1d82f674ff9f00f968b3ff10348483f15b3a3 100644 (file)
@@ -648,34 +648,6 @@ void ath10k_core_unregister(struct ath10k *ar)
 }
 EXPORT_SYMBOL(ath10k_core_unregister);
 
-int ath10k_core_target_suspend(struct ath10k *ar)
-{
-       int ret;
-
-       ath10k_dbg(ATH10K_DBG_CORE, "%s: called", __func__);
-
-       ret = ath10k_wmi_pdev_suspend_target(ar);
-       if (ret)
-               ath10k_warn("could not suspend target (%d)\n", ret);
-
-       return ret;
-}
-EXPORT_SYMBOL(ath10k_core_target_suspend);
-
-int ath10k_core_target_resume(struct ath10k *ar)
-{
-       int ret;
-
-       ath10k_dbg(ATH10K_DBG_CORE, "%s: called", __func__);
-
-       ret = ath10k_wmi_pdev_resume_target(ar);
-       if (ret)
-               ath10k_warn("could not resume target (%d)\n", ret);
-
-       return ret;
-}
-EXPORT_SYMBOL(ath10k_core_target_resume);
-
 MODULE_AUTHOR("Qualcomm Atheros");
 MODULE_DESCRIPTION("Core module for QCA988X PCIe devices.");
 MODULE_LICENSE("Dual BSD/GPL");
index d5b2533d33a104c54629580d804739db9b93c79a..5c94ea06eb716408a239e1ad80c77701101baa25 100644 (file)
@@ -365,7 +365,4 @@ void ath10k_core_stop(struct ath10k *ar);
 int ath10k_core_register(struct ath10k *ar);
 void ath10k_core_unregister(struct ath10k *ar);
 
-int ath10k_core_target_suspend(struct ath10k *ar);
-int ath10k_core_target_resume(struct ath10k *ar);
-
 #endif /* _CORE_H_ */
index 00d29402fa1d39bcaf20e6c16d0c148c9836f0a1..dcdea68bcc0a0ffd091eee16e0b74654ef3339b7 100644 (file)
@@ -80,6 +80,9 @@ struct ath10k_hif_ops {
        /* Power down the device and free up resources. stop() must be called
         * before this if start() was called earlier */
        void (*power_down)(struct ath10k *ar);
+
+       int (*suspend)(struct ath10k *ar);
+       int (*resume)(struct ath10k *ar);
 };
 
 
@@ -154,4 +157,20 @@ static inline void ath10k_hif_power_down(struct ath10k *ar)
        ar->hif.ops->power_down(ar);
 }
 
+static inline int ath10k_hif_suspend(struct ath10k *ar)
+{
+       if (!ar->hif.ops->suspend)
+               return -EOPNOTSUPP;
+
+       return ar->hif.ops->suspend(ar);
+}
+
+static inline int ath10k_hif_resume(struct ath10k *ar)
+{
+       if (!ar->hif.ops->resume)
+               return -EOPNOTSUPP;
+
+       return ar->hif.ops->resume(ar);
+}
+
 #endif /* _HIF_H_ */
index 4627c16d2d05a0c53504d4fec11e0e610568dae9..febba7d8ca4237d7042b2e24997d0630c19ec4e8 100644 (file)
@@ -20,6 +20,7 @@
 #include <net/mac80211.h>
 #include <linux/etherdevice.h>
 
+#include "hif.h"
 #include "core.h"
 #include "debug.h"
 #include "wmi.h"
@@ -2749,6 +2750,67 @@ static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
        return 1;
 }
 
+#ifdef CONFIG_PM
+static int ath10k_suspend(struct ieee80211_hw *hw,
+                         struct cfg80211_wowlan *wowlan)
+{
+       struct ath10k *ar = hw->priv;
+       int ret;
+
+       ar->is_target_paused = false;
+
+       ret = ath10k_wmi_pdev_suspend_target(ar);
+       if (ret) {
+               ath10k_warn("could not suspend target (%d)\n", ret);
+               return 1;
+       }
+
+       ret = wait_event_interruptible_timeout(ar->event_queue,
+                                              ar->is_target_paused == true,
+                                              1 * HZ);
+       if (ret < 0) {
+               ath10k_warn("suspend interrupted (%d)\n", ret);
+               goto resume;
+       } else if (ret == 0) {
+               ath10k_warn("suspend timed out - target pause event never came\n");
+               goto resume;
+       }
+
+       ret = ath10k_hif_suspend(ar);
+       if (ret) {
+               ath10k_warn("could not suspend hif (%d)\n", ret);
+               goto resume;
+       }
+
+       return 0;
+resume:
+       ret = ath10k_wmi_pdev_resume_target(ar);
+       if (ret)
+               ath10k_warn("could not resume target (%d)\n", ret);
+       return 1;
+}
+
+static int ath10k_resume(struct ieee80211_hw *hw)
+{
+       struct ath10k *ar = hw->priv;
+       int ret;
+
+       ret = ath10k_hif_resume(ar);
+       if (ret) {
+               ath10k_warn("could not resume hif (%d)\n", ret);
+               return 1;
+       }
+
+       ret = ath10k_wmi_pdev_resume_target(ar);
+       if (ret) {
+               ath10k_warn("could not resume target (%d)\n", ret);
+               return 1;
+       }
+
+       return 0;
+}
+#endif
+
 static const struct ieee80211_ops ath10k_ops = {
        .tx                             = ath10k_tx,
        .start                          = ath10k_start,
@@ -2769,6 +2831,10 @@ static const struct ieee80211_ops ath10k_ops = {
        .set_frag_threshold             = ath10k_set_frag_threshold,
        .flush                          = ath10k_flush,
        .tx_last_beacon                 = ath10k_tx_last_beacon,
+#ifdef CONFIG_PM
+       .suspend                        = ath10k_suspend,
+       .resume                         = ath10k_resume,
+#endif
 };
 
 #define RATETAB_ENT(_rate, _rateid, _flags) { \
index c15b0c58cc87778546b701087cbf9cbca5e7483b..75f5427bb416f00d298f723c4395f89d218aa0c4 100644 (file)
@@ -1796,6 +1796,55 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar)
                ath10k_do_pci_sleep(ar);
 }
 
+#ifdef CONFIG_PM
+
+#define ATH10K_PCI_PM_CONTROL 0x44
+
+static int ath10k_pci_hif_suspend(struct ath10k *ar)
+{
+       struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+       struct pci_dev *pdev = ar_pci->pdev;
+       u32 val;
+
+       pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+       if ((val & 0x000000ff) != 0x3) {
+               pci_save_state(pdev);
+               pci_disable_device(pdev);
+               pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+                                      (val & 0xffffff00) | 0x03);
+       }
+
+       return 0;
+}
+
+static int ath10k_pci_hif_resume(struct ath10k *ar)
+{
+       struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+       struct pci_dev *pdev = ar_pci->pdev;
+       u32 val;
+
+       pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
+
+       if ((val & 0x000000ff) != 0) {
+               pci_restore_state(pdev);
+               pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
+                                      val & 0xffffff00);
+               /*
+                * Suspend/Resume resets the PCI configuration space,
+                * so we have to re-disable the RETRY_TIMEOUT register (0x41)
+                * to keep PCI Tx retries from interfering with C3 CPU state
+                */
+               pci_read_config_dword(pdev, 0x40, &val);
+
+               if ((val & 0x0000ff00) != 0)
+                       pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+       }
+
+       return 0;
+}
+#endif
+
 static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
        .send_head              = ath10k_pci_hif_send_head,
        .exchange_bmi_msg       = ath10k_pci_hif_exchange_bmi_msg,
@@ -1808,6 +1857,10 @@ static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
        .get_free_queue_number  = ath10k_pci_hif_get_free_queue_number,
        .power_up               = ath10k_pci_hif_power_up,
        .power_down             = ath10k_pci_hif_power_down,
+#ifdef CONFIG_PM
+       .suspend                = ath10k_pci_hif_suspend,
+       .resume                 = ath10k_pci_hif_resume,
+#endif
 };
 
 static void ath10k_pci_ce_tasklet(unsigned long ptr)
@@ -2376,128 +2429,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev)
        kfree(ar_pci);
 }
 
-#if defined(CONFIG_PM_SLEEP)
-
-#define ATH10K_PCI_PM_CONTROL 0x44
-
-static int ath10k_pci_suspend(struct device *device)
-{
-       struct pci_dev *pdev = to_pci_dev(device);
-       struct ath10k *ar = pci_get_drvdata(pdev);
-       struct ath10k_pci *ar_pci;
-       u32 val;
-       int ret, retval;
-
-       ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
-
-       if (!ar)
-               return -ENODEV;
-
-       ar_pci = ath10k_pci_priv(ar);
-       if (!ar_pci)
-               return -ENODEV;
-
-       if (ath10k_core_target_suspend(ar))
-               return -EBUSY;
-
-       ret = wait_event_interruptible_timeout(ar->event_queue,
-                                               ar->is_target_paused == true,
-                                               1 * HZ);
-       if (ret < 0) {
-               ath10k_warn("suspend interrupted (%d)\n", ret);
-               retval = ret;
-               goto resume;
-       } else if (ret == 0) {
-               ath10k_warn("suspend timed out - target pause event never came\n");
-               retval = EIO;
-               goto resume;
-       }
-
-       /*
-        * reset is_target_paused and host can check that in next time,
-        * or it will always be TRUE and host just skip the waiting
-        * condition, it causes target assert due to host already
-        * suspend
-        */
-       ar->is_target_paused = false;
-
-       pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
-
-       if ((val & 0x000000ff) != 0x3) {
-               pci_save_state(pdev);
-               pci_disable_device(pdev);
-               pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
-                                      (val & 0xffffff00) | 0x03);
-       }
-
-       return 0;
-resume:
-       ret = ath10k_core_target_resume(ar);
-       if (ret)
-               ath10k_warn("could not resume (%d)\n", ret);
-
-       return retval;
-}
-
-static int ath10k_pci_resume(struct device *device)
-{
-       struct pci_dev *pdev = to_pci_dev(device);
-       struct ath10k *ar = pci_get_drvdata(pdev);
-       struct ath10k_pci *ar_pci;
-       int ret;
-       u32 val;
-
-       ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
-
-       if (!ar)
-               return -ENODEV;
-       ar_pci = ath10k_pci_priv(ar);
-
-       if (!ar_pci)
-               return -ENODEV;
-
-       ret = pci_enable_device(pdev);
-       if (ret) {
-               ath10k_warn("cannot enable PCI device: %d\n", ret);
-               return ret;
-       }
-
-       pci_read_config_dword(pdev, ATH10K_PCI_PM_CONTROL, &val);
-
-       if ((val & 0x000000ff) != 0) {
-               pci_restore_state(pdev);
-               pci_write_config_dword(pdev, ATH10K_PCI_PM_CONTROL,
-                                      val & 0xffffff00);
-               /*
-                * Suspend/Resume resets the PCI configuration space,
-                * so we have to re-disable the RETRY_TIMEOUT register (0x41)
-                * to keep PCI Tx retries from interfering with C3 CPU state
-                */
-               pci_read_config_dword(pdev, 0x40, &val);
-
-               if ((val & 0x0000ff00) != 0)
-                       pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-       }
-
-       ret = ath10k_core_target_resume(ar);
-       if (ret)
-               ath10k_warn("target resume failed: %d\n", ret);
-
-       return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(ath10k_dev_pm_ops,
-                        ath10k_pci_suspend,
-                        ath10k_pci_resume);
-
-#define ATH10K_PCI_PM_OPS (&ath10k_dev_pm_ops)
-
-#else
-
-#define ATH10K_PCI_PM_OPS NULL
-
-#endif /* CONFIG_PM_SLEEP */
-
 MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);
 
 static struct pci_driver ath10k_pci_driver = {
@@ -2505,7 +2436,6 @@ static struct pci_driver ath10k_pci_driver = {
        .id_table = ath10k_pci_id_table,
        .probe = ath10k_pci_probe,
        .remove = ath10k_pci_remove,
-       .driver.pm = ATH10K_PCI_PM_OPS,
 };
 
 static int __init ath10k_pci_init(void)