arm64: dts: rk3399: add evb3 support for android drm

Change-Id: I014dac7e2993d12795d7da9732703319fb56faef
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 97d54d06875468fc018578588dda73ea68648ff3..20f352e4cce09618fa54722b2ffa19a62b3f51c5 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev2-android-next.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev2-cros.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-android.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-android-edp.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-android-edp-next.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-rev3-cros.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-fpga.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-gru.dtb

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb-rev3-android-edp-next.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb-rev3-android-edp-next.dts
new file mode 100644 (file)
index 0000000..b77c6b6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb-rev3-android-edp-next.dts
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3399-evb-rev3.dtsi"
+#include "rk3399-android-next.dtsi"
+
+/ {
+       model = "Rockchip RK3399 Evaluation Board v3 edp (Android)";
+       compatible = "rockchip,android", "rockchip,rk3399-evb-rev3-next", "rockchip,rk3399";
+
+       edp_panel: edp-panel {
+               compatible = "lg,lp079qx1-sp0v", "panel-simple";
+               backlight = <&backlight>;
+               power-supply = <&vcc3v3_s0>;
+               enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+
+               ports {
+                       panel_in_edp: endpoint {
+                               remote-endpoint = <&edp_out_panel>;
+                       };
+               };
+       };
+};
+
+&i2s2 {
+       status = "okay";
+};
+
+&gt9xx {
+       status = "disabled";
+};
+
+&i2c4 {
+       gsl3673: gsl3673@40 {
+               compatible = "GSL,GSL3673";
+               reg = <0x40>;
+               screen_max_x = <1536>;
+               screen_max_y = <2048>;
+               irq_gpio_number = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>;
+               rst_gpio_number = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&edp {
+       status = "okay";
+
+       ports {
+               edp_out: port@1 {
+                       reg = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       edp_out_panel: endpoint@0 {
+                               reg = <0>;
+                               remote-endpoint = <&panel_in_edp>;
+                       };
+               };
+       };
+};
+
+&mipi_dsi {
+       status = "disabled";
+};
+