[MIPS] kgdb: Remove existing implementation
authorJason Wessel <jason.wessel@windriver.com>
Tue, 29 Jul 2008 20:58:52 +0000 (15:58 -0500)
committerRalf Baechle <ralf@linux-mips.org>
Wed, 30 Jul 2008 20:54:42 +0000 (21:54 +0100)
This patch explicitly removes the kgdb implementation, for mips which
is intended to be followed by a patch that adds a kgdb implementation
for MIPS that makes use of the kgdb core in the kernel.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
59 files changed:
arch/mips/Kconfig
arch/mips/Kconfig.debug
arch/mips/au1000/Kconfig
arch/mips/au1000/common/Makefile
arch/mips/au1000/common/dbg_io.c [deleted file]
arch/mips/basler/excite/Makefile
arch/mips/basler/excite/excite_dbg_io.c [deleted file]
arch/mips/basler/excite/excite_irq.c
arch/mips/basler/excite/excite_setup.c
arch/mips/configs/db1000_defconfig
arch/mips/configs/db1100_defconfig
arch/mips/configs/db1200_defconfig
arch/mips/configs/db1500_defconfig
arch/mips/configs/db1550_defconfig
arch/mips/configs/excite_defconfig
arch/mips/configs/ip27_defconfig
arch/mips/configs/msp71xx_defconfig
arch/mips/configs/mtx1_defconfig
arch/mips/configs/pb1100_defconfig
arch/mips/configs/pb1500_defconfig
arch/mips/configs/pb1550_defconfig
arch/mips/configs/pnx8550-jbs_defconfig
arch/mips/configs/pnx8550-stb810_defconfig
arch/mips/configs/rbtx49xx_defconfig
arch/mips/configs/sb1250-swarm_defconfig
arch/mips/configs/yosemite_defconfig
arch/mips/emma2rh/markeins/platform.c
arch/mips/emma2rh/markeins/setup.c
arch/mips/kernel/Makefile
arch/mips/kernel/gdb-low.S [deleted file]
arch/mips/kernel/gdb-stub.c [deleted file]
arch/mips/kernel/irq.c
arch/mips/mti-malta/Makefile
arch/mips/mti-malta/malta-init.c
arch/mips/mti-malta/malta-kgdb.c [deleted file]
arch/mips/mti-malta/malta-setup.c
arch/mips/nxp/pnx8550/common/Makefile
arch/mips/nxp/pnx8550/common/gdb_hook.c [deleted file]
arch/mips/nxp/pnx8550/common/int.c
arch/mips/nxp/pnx8550/common/proc.c
arch/mips/nxp/pnx8550/common/setup.c
arch/mips/pmc-sierra/msp71xx/msp_serial.c
arch/mips/pmc-sierra/yosemite/Makefile
arch/mips/pmc-sierra/yosemite/dbg_io.c [deleted file]
arch/mips/pmc-sierra/yosemite/irq.c
arch/mips/sgi-ip22/ip22-setup.c
arch/mips/sgi-ip27/Makefile
arch/mips/sgi-ip27/ip27-dbgio.c [deleted file]
arch/mips/sibyte/bcm1480/irq.c
arch/mips/sibyte/cfe/setup.c
arch/mips/sibyte/sb1250/irq.c
arch/mips/sibyte/swarm/Makefile
arch/mips/sibyte/swarm/dbg_io.c [deleted file]
arch/mips/txx9/Kconfig
arch/mips/txx9/generic/Makefile
arch/mips/txx9/generic/dbgio.c [deleted file]
arch/mips/txx9/jmr3927/Makefile
arch/mips/txx9/jmr3927/kgdb_io.c [deleted file]
include/asm-mips/gdb-stub.h [deleted file]

index b4c4eaa5dd265bbdd4646898a99f63e86e01e315..34b13f1d8a0ed3a4d31de5577455d617147ff2e2 100644 (file)
@@ -34,7 +34,6 @@ config BASLER_EXCITE
        select SYS_HAS_CPU_RM9000
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_KGDB
        help
          The eXcite is a smart camera platform manufactured by
          Basler Vision Technologies AG.
@@ -280,7 +279,6 @@ config PMC_MSP
        select SYS_HAS_CPU_MIPS32_R2
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_KGDB
        select IRQ_CPU
        select SERIAL_8250
        select SERIAL_8250_CONSOLE
@@ -306,7 +304,6 @@ config PMC_YOSEMITE
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_HIGHMEM
-       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_SMP
        help
          Yosemite is an evaluation board for the RM9000x2 processor
@@ -359,7 +356,6 @@ config SGI_IP27
        select SYS_HAS_CPU_R10000
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_NUMA
        select SYS_SUPPORTS_SMP
        select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -475,7 +471,6 @@ config SIBYTE_SWARM
        select SYS_HAS_CPU_SB1
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_HIGHMEM
-       select SYS_SUPPORTS_KGDB
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select ZONE_DMA32 if 64BIT
 
@@ -868,7 +863,6 @@ config SOC_PNX8550
        select SYS_HAS_EARLY_PRINTK
        select SYS_SUPPORTS_32BIT_KERNEL
        select GENERIC_HARDIRQS_NO__DO_IRQ
-       select SYS_SUPPORTS_KGDB
        select GENERIC_GPIO
 
 config SWAP_IO_SPACE
index f18cf92650e350d746a299081dfd58dbeb468b34..765c8e287d2b2b45f2687f607c61ecc1d1096cad 100644 (file)
@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
          arch/mips/kernel/smtc.c.  This debugging option result in significant
          overhead so should be disabled in production kernels.
 
-config KGDB
-       bool "Remote GDB kernel debugging"
-       depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-       select DEBUG_INFO
-       help
-         If you say Y here, it will be possible to remotely debug the MIPS
-         kernel using gdb. This enlarges your kernel image disk size by
-         several megabytes and requires a machine with more than 16 MB,
-         better 32 MB RAM to avoid excessive linking time. This is only
-         useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-       bool
-
-config GDB_CONSOLE
-       bool "Console output to GDB"
-       depends on KGDB
-       help
-         If you are using GDB for remote debugging over a serial port and
-         would like kernel messages to be formatted into GDB $O packets so
-         that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
        bool "Corelis Debugger"
        depends on SIBYTE_SB1xxx_SOC
index 1fe97cccead1f7b4d633eba2d273b41204cecd4e..e4a057d80ab6edddaf7f075ef781886833e7a024 100644 (file)
@@ -134,4 +134,3 @@ config SOC_AU1X00
        select SYS_HAS_CPU_MIPS32_R1
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_APM_EMULATION
-       select SYS_SUPPORTS_KGDB
index dd0e19dacfcff444ab7b4ff07912ff8b0bcde082..df48fd65bbf3989cfe5e8be4997214277b2a54a3 100644 (file)
@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
        au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
        sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)             += dbg_io.o
 obj-$(CONFIG_PCI)              += pci.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644 (file)
index af5be7d..0000000
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX                0       /* Receive buffer */
-#define UART_TX                4       /* Transmit buffer */
-#define UART_IER       8       /* Interrupt Enable Register */
-#define UART_IIR       0xC     /* Interrupt ID Register */
-#define UART_FCR       0x10    /* FIFO Control Register */
-#define UART_LCR       0x14    /* Line Control Register */
-#define UART_MCR       0x18    /* Modem Control Register */
-#define UART_LSR       0x1C    /* Line Status Register */
-#define UART_MSR       0x20    /* Modem Status Register */
-#define UART_CLK       0x28    /* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL 0x100   /* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-       if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-               UART16550_WRITE(UART_MOD_CNTRL, 3);
-       calc_clock();
-
-       /* disable interrupts */
-       UART16550_WRITE(UART_IER, 0);
-
-       /* set up baud rate */
-       {
-               u32 divisor;
-
-               /* set divisor */
-               divisor = get_au1x00_uart_baud_base() / baud;
-               UART16550_WRITE(UART_CLK, divisor & 0xffff);
-       }
-
-       /* set data format */
-       UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(UART16550_BAUD_115200,
-                         UART16550_DATA_8BIT,
-                         UART16550_PARITY_NONE,
-                         UART16550_STOP_1BIT);
-       }
-
-       while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-       return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(UART16550_BAUD_115200,
-                         UART16550_DATA_8BIT,
-                         UART16550_PARITY_NONE,
-                         UART16550_STOP_1BIT);
-       }
-
-       while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-       UART16550_WRITE(UART_TX, byte);
-
-       return 1;
-}
-
-#endif
index 519142c2e4ef31f475349a618ee630f20287fc88..cff29cf46d0353e59d1bb782c712b1ab29901fe6 100644 (file)
@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)    += excite_irq.o excite_prom.o excite_setup.o \
                                   excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)             += excite_dbg_io.o
 obj-m                          += excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644 (file)
index d289e3a..0000000
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK               25000000
-#define BASE_BAUD              (UART_CLK / 16)
-#define REGISTER_BASE_0                0x0208UL
-#define REGISTER_BASE_1                0x0238UL
-
-#define REGISTER_BASE_DBG      REGISTER_BASE_1
-
-#define CPRR   0x0004
-#define UACFG  0x0200
-#define UAINTS 0x0204
-#define UARBR  (REGISTER_BASE_DBG + 0x0000)
-#define UATHR  (REGISTER_BASE_DBG + 0x0004)
-#define UADLL  (REGISTER_BASE_DBG + 0x0008)
-#define UAIER  (REGISTER_BASE_DBG + 0x000c)
-#define UADLH  (REGISTER_BASE_DBG + 0x0010)
-#define UAIIR  (REGISTER_BASE_DBG + 0x0014)
-#define UAFCR  (REGISTER_BASE_DBG + 0x0018)
-#define UALCR  (REGISTER_BASE_DBG + 0x001c)
-#define UAMCR  (REGISTER_BASE_DBG + 0x0020)
-#define UALSR  (REGISTER_BASE_DBG + 0x0024)
-#define UAMSR  (REGISTER_BASE_DBG + 0x0028)
-#define UASCR  (REGISTER_BASE_DBG + 0x002c)
-
-#define        PARITY_NONE     0
-#define        PARITY_ODD      0x08
-#define        PARITY_EVEN     0x18
-#define        PARITY_MARK     0x28
-#define        PARITY_SPACE    0x38
-
-#define        DATA_5BIT       0x0
-#define        DATA_6BIT       0x1
-#define        DATA_7BIT       0x2
-#define        DATA_8BIT       0x3
-
-#define        STOP_1BIT       0x0
-#define        STOP_2BIT       0x4
-
-#define BAUD_DBG       57600
-#define        PARITY_DBG      PARITY_NONE
-#define        DATA_DBG        DATA_8BIT
-#define        STOP_DBG        STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-       const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-       /* Take the UART out of reset */
-       titan_writel(0x00ff1cff, CPRR);
-       titan_writel(0x00000000, UACFG);
-       titan_writel(0x00000002, UACFG);
-
-       titan_writel(0x0, UALCR);
-       titan_writel(0x0, UAIER);
-
-       /* Disable FIFOs */
-       titan_writel(0x00, UAFCR);
-
-       titan_writel(0x80, UALCR);
-       titan_writel(divisor & 0xff, UADLL);
-       titan_writel((divisor & 0xff00) >> 8, UADLH);
-       titan_writel(0x0, UALCR);
-
-       titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-       /* Enable receiver interrupt */
-       titan_readl(UARBR);
-       titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-       while (!(titan_readl(UALSR) & 0x1));
-       return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-       while (!(titan_readl(UALSR) & 0x20));
-       titan_writel(data, UATHR);
-       return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-       if (unlikely(
-               ((titan_readl(UAIIR) & 0x7) == 4)
-               && ((titan_readl(UARBR) & 0xff) == 0x3)))
-                       set_async_breakpoint(&regs->cp0_epc);
-}
index 4903e067916b4b5badaca3f2b44bfb2d8c3cbe8d..934e0a6b1011e5e137dde54423611698a84ac801 100644 (file)
@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
        mips_cpu_irq_init();
        rm7k_cpu_irq_init();
        rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-       excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
        msgint      = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
        if ((pending & (1 << TITAN_IRQ)) && msgint) {
                ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-               excite_kgdb_inthdl();
-#endif
                do_IRQ(TITAN_IRQ);
                return;
        }
index 6dd8f0d46d096f1b8ad57d0510abed786bb09b42..d66b3b8edf2a10723ab947437faa93272275b632 100644 (file)
@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
        /* Take the DUART out of reset */
        titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
        /* Enable both ports */
        titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
        /* Enable port #0 only */
        titan_writel(MASK_SER0, UACFG);
-#endif /* defined(CONFIG_KGDB) */
+#endif
 
        /*
         * Set up serial port #0. Do not use autodetection; the result is
index ebb8ad62b3a3cac9dd4c3723ccd7012d6d66d526..a279165e3a7d3899b9fae53a7323f4e3df3b3781 100644 (file)
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index ad4e5ef65592efbf80c3cc769bb68f865f1c91de..8944d15caf13145866a136710597dab3c915b704 100644 (file)
@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index d0dc2e83ad35aadac3d848a0db067f2c764f76be..ab17973107fde80e44e217b696cbf73757297f62 100644 (file)
@@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 9155082313c891ffa5eaf61234cfecfbb90bc38f..b65803f19352724866354ba61d5b53a54d1a17f2 100644 (file)
@@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index e4e324422cd96d2c02cc1976fae34b58518164e9..a190ac07740b31dcdc935701ebc30d02c87f9bc4 100644 (file)
@@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 3572e80356d2e8c26088795677d5cfb4189d752d..4e465e94599179a79f53769789cc0b3830aa0a40 100644 (file)
@@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 138c575a0151668ded722068f6ebc7c658cd6a10..831d3e5a1ea6ba976d04f0febdd7793f51b367a0 100644 (file)
@@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 59d19472b161b621bfbe41db03f91809176f21c1..dd13db4d0fb98efec3a5c56f427cfd7f26185355 100644 (file)
@@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
index bacf0dd0e3457a2f37447a131a51d7168b77ca1f..db9272677aa2dd2b26e98f01caf21cae5f656bf7 100644 (file)
@@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 6dfe6f793cef62fdaf92fb22f452cdba1a0ef100..9e21e333a2fc66efaef996f0198718f8b46ed15c 100644 (file)
@@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index c965a87e6a963dd1f80c962a3490d590aca0259f..af67ed4f71ae8bf3ad06f44e4a829c84b53cb528 100644 (file)
@@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 0778996c682fbcf1ff81f97b8e3bc0cc64e4296b..7956f56cbf3ed0dd1a9ca825d4b3651ed5c15195 100644 (file)
@@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 37c7b5ffd474afa5d3483137efcc56c0dee6f5ef..723bd5176a358a7a1993335c931223be403d2c18 100644 (file)
@@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
index 893e5c4ab66d55a1af9a21881f6ef22a3d6d9ce2..b5052fb42e9ef11475960579564c7268fbb1808e 100644 (file)
@@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
index e42aed5a38bb8cba5008474475cf48b603ccaf1d..c7c0864b8ce98053a70a7fc576dc7f75c64793a5 100644 (file)
@@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
index 1ea97865f2cead680c0670397b34ec735bbb7d08..a9acaa2f9da3e6bc31a81ab2a729c6955b5db523 100644 (file)
@@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
index 7f86c43d1bdaaa14b291b84473236782806790c1..ea8249c75b3f8e0ed37f4f3133dacdf5b3014fb0 100644 (file)
@@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
index 11567702b155460a84adcbf9b08bca3c6c280a97..d70627de7cfe953764ae786304d0e89b73c1e178 100644 (file)
@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
index 62bfb455d1b11c9edb89ab6d1683c0aaf6b20fef..a56c4b804b07c10821a2dfb9aaf5f8b8518e29e7 100644 (file)
@@ -41,7 +41,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
index 0fd31974ba28b2e9da37b936e041305adc9dcd81..73ff048eaa55dae99cb753acf466c5665f7d8e7c 100644 (file)
@@ -71,7 +71,6 @@ obj-$(CONFIG_MIPS32_COMPAT)   += linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)       += binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)       += binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)             += gdb-low.o gdb-stub.o
 obj-$(CONFIG_PROC_FS)          += proc.o
 
 obj-$(CONFIG_64BIT)            += cpu-bugs64.o
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644 (file)
index 2c44606..0000000
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0  mfc0
-#define DMTC0  mtc0
-#define LDC1   lwc1
-#define SDC1   lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0  dmfc0
-#define DMTC0  dmtc0
-#define LDC1   ldc1
-#define SDC1   ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-               .align  5
-               NESTED(trap_low, GDB_FR_SIZE, sp)
-               .set    noat
-               .set    noreorder
-
-               mfc0    k0, CP0_STATUS
-               sll     k0, 3                   /* extract cu0 bit */
-               bltz    k0, 1f
-               move    k1, sp
-
-               /*
-                * Called from user mode, go somewhere else.
-                */
-               mfc0    k0, CP0_CAUSE
-               andi    k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-               dsll    k0, k0, 1
-#endif
-               PTR_L   k1, saved_vectors(k0)
-               jr      k1
-               nop
-1:
-               move    k0, sp
-               PTR_SUBU sp, k1, GDB_FR_SIZE*2  # see comment above
-               LONG_S  k0, GDB_FR_REG29(sp)
-               LONG_S  $2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-               mfc0    v0, CP0_STATUS
-               LONG_S  v0, GDB_FR_STATUS(sp)
-               mfc0    v0, CP0_CAUSE
-               LONG_S  v0, GDB_FR_CAUSE(sp)
-               DMFC0   v0, CP0_EPC
-               LONG_S  v0, GDB_FR_EPC(sp)
-               DMFC0   v0, CP0_BADVADDR
-               LONG_S  v0, GDB_FR_BADVADDR(sp)
-               mfhi    v0
-               LONG_S  v0, GDB_FR_HI(sp)
-               mflo    v0
-               LONG_S  v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-               LONG_S  zero, GDB_FR_REG0(sp)           /* I know... */
-               LONG_S  $1, GDB_FR_REG1(sp)
-               /* v0 already saved */
-               LONG_S  $3, GDB_FR_REG3(sp)
-               LONG_S  $4, GDB_FR_REG4(sp)
-               LONG_S  $5, GDB_FR_REG5(sp)
-               LONG_S  $6, GDB_FR_REG6(sp)
-               LONG_S  $7, GDB_FR_REG7(sp)
-               LONG_S  $8, GDB_FR_REG8(sp)
-               LONG_S  $9, GDB_FR_REG9(sp)
-               LONG_S  $10, GDB_FR_REG10(sp)
-               LONG_S  $11, GDB_FR_REG11(sp)
-               LONG_S  $12, GDB_FR_REG12(sp)
-               LONG_S  $13, GDB_FR_REG13(sp)
-               LONG_S  $14, GDB_FR_REG14(sp)
-               LONG_S  $15, GDB_FR_REG15(sp)
-               LONG_S  $16, GDB_FR_REG16(sp)
-               LONG_S  $17, GDB_FR_REG17(sp)
-               LONG_S  $18, GDB_FR_REG18(sp)
-               LONG_S  $19, GDB_FR_REG19(sp)
-               LONG_S  $20, GDB_FR_REG20(sp)
-               LONG_S  $21, GDB_FR_REG21(sp)
-               LONG_S  $22, GDB_FR_REG22(sp)
-               LONG_S  $23, GDB_FR_REG23(sp)
-               LONG_S  $24, GDB_FR_REG24(sp)
-               LONG_S  $25, GDB_FR_REG25(sp)
-               LONG_S  $26, GDB_FR_REG26(sp)
-               LONG_S  $27, GDB_FR_REG27(sp)
-               LONG_S  $28, GDB_FR_REG28(sp)
-               /* sp already saved */
-               LONG_S  $30, GDB_FR_REG30(sp)
-               LONG_S  $31, GDB_FR_REG31(sp)
-
-               CLI                             /* disable interrupts */
-               TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-               mfc0    v0, CP0_STATUS          /* FPU enabled? */
-               srl     v0, v0, 16
-               andi    v0, v0, (ST0_CU1 >> 16)
-
-               beqz    v0,2f                   /* disabled, skip */
-                nop
-
-               SDC1    $0, GDB_FR_FPR0(sp)
-               SDC1    $1, GDB_FR_FPR1(sp)
-               SDC1    $2, GDB_FR_FPR2(sp)
-               SDC1    $3, GDB_FR_FPR3(sp)
-               SDC1    $4, GDB_FR_FPR4(sp)
-               SDC1    $5, GDB_FR_FPR5(sp)
-               SDC1    $6, GDB_FR_FPR6(sp)
-               SDC1    $7, GDB_FR_FPR7(sp)
-               SDC1    $8, GDB_FR_FPR8(sp)
-               SDC1    $9, GDB_FR_FPR9(sp)
-               SDC1    $10, GDB_FR_FPR10(sp)
-               SDC1    $11, GDB_FR_FPR11(sp)
-               SDC1    $12, GDB_FR_FPR12(sp)
-               SDC1    $13, GDB_FR_FPR13(sp)
-               SDC1    $14, GDB_FR_FPR14(sp)
-               SDC1    $15, GDB_FR_FPR15(sp)
-               SDC1    $16, GDB_FR_FPR16(sp)
-               SDC1    $17, GDB_FR_FPR17(sp)
-               SDC1    $18, GDB_FR_FPR18(sp)
-               SDC1    $19, GDB_FR_FPR19(sp)
-               SDC1    $20, GDB_FR_FPR20(sp)
-               SDC1    $21, GDB_FR_FPR21(sp)
-               SDC1    $22, GDB_FR_FPR22(sp)
-               SDC1    $23, GDB_FR_FPR23(sp)
-               SDC1    $24, GDB_FR_FPR24(sp)
-               SDC1    $25, GDB_FR_FPR25(sp)
-               SDC1    $26, GDB_FR_FPR26(sp)
-               SDC1    $27, GDB_FR_FPR27(sp)
-               SDC1    $28, GDB_FR_FPR28(sp)
-               SDC1    $29, GDB_FR_FPR29(sp)
-               SDC1    $30, GDB_FR_FPR30(sp)
-               SDC1    $31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-               cfc1    v0, CP1_STATUS
-               LONG_S  v0, GDB_FR_FSR(sp)
-               cfc1    v0, CP1_REVISION
-               LONG_S  v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-               LONG_S  sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-               mfc0    v0, CP0_INDEX
-               LONG_S  v0, GDB_FR_CP0_INDEX(sp)
-               mfc0    v0, CP0_RANDOM
-               LONG_S  v0, GDB_FR_CP0_RANDOM(sp)
-               DMFC0   v0, CP0_ENTRYLO0
-               LONG_S  v0, GDB_FR_CP0_ENTRYLO0(sp)
-               DMFC0   v0, CP0_ENTRYLO1
-               LONG_S  v0, GDB_FR_CP0_ENTRYLO1(sp)
-               DMFC0   v0, CP0_CONTEXT
-               LONG_S  v0, GDB_FR_CP0_CONTEXT(sp)
-               mfc0    v0, CP0_PAGEMASK
-               LONG_S  v0, GDB_FR_CP0_PAGEMASK(sp)
-               mfc0    v0, CP0_WIRED
-               LONG_S  v0, GDB_FR_CP0_WIRED(sp)
-               DMFC0   v0, CP0_ENTRYHI
-               LONG_S  v0, GDB_FR_CP0_ENTRYHI(sp)
-               mfc0    v0, CP0_PRID
-               LONG_S  v0, GDB_FR_CP0_PRID(sp)
-
-               .set    at
-
-/*
- * Continue with the higher level handler
- */
-
-               move    a0,sp
-
-               jal     handle_exception
-                nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-               .set    noat
-
-               LONG_L  v0, GDB_FR_CP0_ENTRYHI(sp)
-               LONG_L  v1, GDB_FR_CP0_WIRED(sp)
-               DMTC0   v0, CP0_ENTRYHI
-               mtc0    v1, CP0_WIRED
-               LONG_L  v0, GDB_FR_CP0_PAGEMASK(sp)
-               LONG_L  v1, GDB_FR_CP0_ENTRYLO1(sp)
-               mtc0    v0, CP0_PAGEMASK
-               DMTC0   v1, CP0_ENTRYLO1
-               LONG_L  v0, GDB_FR_CP0_ENTRYLO0(sp)
-               LONG_L  v1, GDB_FR_CP0_INDEX(sp)
-               DMTC0   v0, CP0_ENTRYLO0
-               LONG_L  v0, GDB_FR_CP0_CONTEXT(sp)
-               mtc0    v1, CP0_INDEX
-               DMTC0   v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-               mfc0    v0, CP0_STATUS          /* check if the FPU is enabled */
-               srl     v0, v0, 16
-               andi    v0, v0, (ST0_CU1 >> 16)
-
-               beqz    v0, 3f                  /* disabled, skip */
-                nop
-
-               LDC1    $31, GDB_FR_FPR31(sp)
-               LDC1    $30, GDB_FR_FPR30(sp)
-               LDC1    $29, GDB_FR_FPR29(sp)
-               LDC1    $28, GDB_FR_FPR28(sp)
-               LDC1    $27, GDB_FR_FPR27(sp)
-               LDC1    $26, GDB_FR_FPR26(sp)
-               LDC1    $25, GDB_FR_FPR25(sp)
-               LDC1    $24, GDB_FR_FPR24(sp)
-               LDC1    $23, GDB_FR_FPR23(sp)
-               LDC1    $22, GDB_FR_FPR22(sp)
-               LDC1    $21, GDB_FR_FPR21(sp)
-               LDC1    $20, GDB_FR_FPR20(sp)
-               LDC1    $19, GDB_FR_FPR19(sp)
-               LDC1    $18, GDB_FR_FPR18(sp)
-               LDC1    $17, GDB_FR_FPR17(sp)
-               LDC1    $16, GDB_FR_FPR16(sp)
-               LDC1    $15, GDB_FR_FPR15(sp)
-               LDC1    $14, GDB_FR_FPR14(sp)
-               LDC1    $13, GDB_FR_FPR13(sp)
-               LDC1    $12, GDB_FR_FPR12(sp)
-               LDC1    $11, GDB_FR_FPR11(sp)
-               LDC1    $10, GDB_FR_FPR10(sp)
-               LDC1    $9, GDB_FR_FPR9(sp)
-               LDC1    $8, GDB_FR_FPR8(sp)
-               LDC1    $7, GDB_FR_FPR7(sp)
-               LDC1    $6, GDB_FR_FPR6(sp)
-               LDC1    $5, GDB_FR_FPR5(sp)
-               LDC1    $4, GDB_FR_FPR4(sp)
-               LDC1    $3, GDB_FR_FPR3(sp)
-               LDC1    $2, GDB_FR_FPR2(sp)
-               LDC1    $1, GDB_FR_FPR1(sp)
-               LDC1    $0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-               /* Read-modify write of Status must be atomic */
-               mfc0    t2, CP0_TCSTATUS
-               ori     t1, t2, TCSTATUS_IXMT
-               mtc0    t1, CP0_TCSTATUS
-               andi    t2, t2, TCSTATUS_IXMT
-               _ehb
-               DMT     9                               # dmt   t1
-               jal     mips_ihb
-               nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-               mfc0    t0, CP0_STATUS
-               ori     t0, 0x1f
-               xori    t0, 0x1f
-               mtc0    t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-               andi    t1, t1, VPECONTROL_TE
-               beqz    t1, 9f
-               nop
-               EMT                                     # emt
-9:
-               mfc0    t1, CP0_TCSTATUS
-               xori    t1, t1, TCSTATUS_IXMT
-               or      t1, t1, t2
-               mtc0    t1, CP0_TCSTATUS
-               _ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-               LONG_L  v0, GDB_FR_STATUS(sp)
-               LONG_L  v1, GDB_FR_EPC(sp)
-               mtc0    v0, CP0_STATUS
-               DMTC0   v1, CP0_EPC
-               LONG_L  v0, GDB_FR_HI(sp)
-               LONG_L  v1, GDB_FR_LO(sp)
-               mthi    v0
-               mtlo    v1
-               LONG_L  $31, GDB_FR_REG31(sp)
-               LONG_L  $30, GDB_FR_REG30(sp)
-               LONG_L  $28, GDB_FR_REG28(sp)
-               LONG_L  $27, GDB_FR_REG27(sp)
-               LONG_L  $26, GDB_FR_REG26(sp)
-               LONG_L  $25, GDB_FR_REG25(sp)
-               LONG_L  $24, GDB_FR_REG24(sp)
-               LONG_L  $23, GDB_FR_REG23(sp)
-               LONG_L  $22, GDB_FR_REG22(sp)
-               LONG_L  $21, GDB_FR_REG21(sp)
-               LONG_L  $20, GDB_FR_REG20(sp)
-               LONG_L  $19, GDB_FR_REG19(sp)
-               LONG_L  $18, GDB_FR_REG18(sp)
-               LONG_L  $17, GDB_FR_REG17(sp)
-               LONG_L  $16, GDB_FR_REG16(sp)
-               LONG_L  $15, GDB_FR_REG15(sp)
-               LONG_L  $14, GDB_FR_REG14(sp)
-               LONG_L  $13, GDB_FR_REG13(sp)
-               LONG_L  $12, GDB_FR_REG12(sp)
-               LONG_L  $11, GDB_FR_REG11(sp)
-               LONG_L  $10, GDB_FR_REG10(sp)
-               LONG_L  $9, GDB_FR_REG9(sp)
-               LONG_L  $8, GDB_FR_REG8(sp)
-               LONG_L  $7, GDB_FR_REG7(sp)
-               LONG_L  $6, GDB_FR_REG6(sp)
-               LONG_L  $5, GDB_FR_REG5(sp)
-               LONG_L  $4, GDB_FR_REG4(sp)
-               LONG_L  $3, GDB_FR_REG3(sp)
-               LONG_L  $2, GDB_FR_REG2(sp)
-               LONG_L  $1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-               LONG_L  k0, GDB_FR_EPC(sp)
-               LONG_L  $29, GDB_FR_REG29(sp)           /* Deallocate stack */
-               jr      k0
-               rfe
-#else
-               LONG_L  sp, GDB_FR_REG29(sp)            /* Deallocate stack */
-
-               .set    mips3
-               eret
-               .set    mips0
-#endif
-               .set    at
-               .set    reorder
-               END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:             lb      t0, (a0)
-               sb      t0, (a1)
-               li      v0, 0
-               jr      ra
-               .section __ex_table,"a"
-               PTR     4b, kgdbfault
-               .previous
-               END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:             sb      a0, (a1)
-               li      v0, 0
-               jr      ra
-               .section __ex_table,"a"
-               PTR     5b, kgdbfault
-               .previous
-               END(kgdb_write_byte)
-
-               .type   kgdbfault@function
-               .ent    kgdbfault
-
-kgdbfault:     li      v0, -EFAULT
-               jr      ra
-               .end    kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644 (file)
index 25f4eab..0000000
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB      Set baud rate to BB..BB                OK or BNN, then sets
- *                                                        baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-       [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized;        /* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-       if (ch >= 'a' && ch <= 'f')
-               return ch-'a'+10;
-       if (ch >= '0' && ch <= '9')
-               return ch-'0';
-       if (ch >= 'A' && ch <= 'F')
-               return ch-'A'+10;
-       return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-       unsigned char checksum;
-       unsigned char xmitcsum;
-       int i;
-       int count;
-       unsigned char ch;
-
-       do {
-               /*
-                * wait around for the start character,
-                * ignore all other characters
-                */
-               while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-               checksum = 0;
-               xmitcsum = -1;
-               count = 0;
-
-               /*
-                * now, read until a # or end of buffer is found
-                */
-               while (count < BUFMAX) {
-                       ch = getDebugChar();
-                       if (ch == '#')
-                               break;
-                       checksum = checksum + ch;
-                       buffer[count] = ch;
-                       count = count + 1;
-               }
-
-               if (count >= BUFMAX)
-                       continue;
-
-               buffer[count] = 0;
-
-               if (ch == '#') {
-                       xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-                       xmitcsum |= hex(getDebugChar() & 0x7f);
-
-                       if (checksum != xmitcsum)
-                               putDebugChar('-');      /* failed checksum */
-                       else {
-                               putDebugChar('+'); /* successful transfer */
-
-                               /*
-                                * if a sequence char is present,
-                                * reply the sequence ID
-                                */
-                               if (buffer[2] == ':') {
-                                       putDebugChar(buffer[0]);
-                                       putDebugChar(buffer[1]);
-
-                                       /*
-                                        * remove sequence chars from buffer
-                                        */
-                                       count = strlen(buffer);
-                                       for (i=3; i <= count; i++)
-                                               buffer[i-3] = buffer[i];
-                               }
-                       }
-               }
-       }
-       while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-       unsigned char checksum;
-       int count;
-       unsigned char ch;
-
-       /*
-        * $<packet info>#<checksum>.
-        */
-
-       do {
-               putDebugChar('$');
-               checksum = 0;
-               count = 0;
-
-               while ((ch = buffer[count]) != 0) {
-                       if (!(putDebugChar(ch)))
-                               return;
-                       checksum += ch;
-                       count += 1;
-               }
-
-               putDebugChar('#');
-               putDebugChar(hexchars[checksum >> 4]);
-               putDebugChar(hexchars[checksum & 0xf]);
-
-       }
-       while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-       unsigned char ch;
-
-       while (count-- > 0) {
-               if (kgdb_read_byte(mem++, &ch) != 0)
-                       return 0;
-               *buf++ = hexchars[ch >> 4];
-               *buf++ = hexchars[ch & 0xf];
-       }
-
-       *buf = 0;
-
-       return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-       int i;
-       unsigned char ch;
-
-       for (i=0; i<count; i++)
-       {
-               if (binary) {
-                       ch = *buf++;
-                       if (ch == 0x7d)
-                               ch = 0x20 ^ *buf++;
-               }
-               else {
-                       ch = hex(*buf++) << 4;
-                       ch |= hex(*buf++);
-               }
-               if (kgdb_write_byte(ch, mem++) != 0)
-                       return 0;
-       }
-
-       return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-       unsigned char tt;               /* Trap type code for MIPS R3xxx and R4xxx */
-       unsigned char signo;            /* Signal that we map this trap into */
-} hard_trap_info[] = {
-       { 6, SIGBUS },                  /* instruction bus error */
-       { 7, SIGBUS },                  /* data bus error */
-       { 9, SIGTRAP },                 /* break */
-       { 10, SIGILL },                 /* reserved instruction */
-/*     { 11, SIGILL },         */      /* CPU unusable */
-       { 12, SIGFPE },                 /* overflow */
-       { 13, SIGTRAP },                /* trap */
-       { 14, SIGSEGV },                /* virtual instruction cache coherency */
-       { 15, SIGFPE },                 /* floating point exception */
-       { 23, SIGSEGV },                /* watch */
-       { 31, SIGSEGV },                /* virtual data cache coherency */
-       { 0, 0}                         /* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-       struct hard_trap_info *ht;
-       unsigned long flags;
-       unsigned char c;
-
-       local_irq_save(flags);
-       for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-               saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-       putDebugChar('+'); /* 'hello world' */
-       /*
-        * In case GDB is started before us, ack any packets
-        * (presumably "$?#xx") sitting there.
-        */
-       while((c = getDebugChar()) != '$');
-       while((c = getDebugChar()) != '#');
-       c = getDebugChar(); /* eat first csum byte */
-       c = getDebugChar(); /* eat second csum byte */
-       putDebugChar('+'); /* ack it */
-
-       initialized = 1;
-       local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-       struct hard_trap_info *ht;
-       unsigned long flags;
-
-       local_irq_save(flags);
-       for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-               set_except_vector(ht->tt, saved_vectors[ht->tt]);
-       local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-       struct hard_trap_info *ht;
-
-       for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-               if (ht->tt == tt)
-                       return ht->signo;
-
-       return SIGHUP;          /* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-       int numChars = 0;
-       int hexValue;
-
-       *intValue = 0;
-
-       while (**ptr) {
-               hexValue = hex(**ptr);
-               if (hexValue < 0)
-                       break;
-
-               *intValue = (*intValue << 4) | hexValue;
-               numChars ++;
-
-               (*ptr)++;
-       }
-
-       return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-       int numChars = 0;
-       int hexValue;
-
-       *longValue = 0;
-
-       while (**ptr) {
-               hexValue = hex(**ptr);
-               if (hexValue < 0)
-                       break;
-
-               *longValue = (*longValue << 4) | hexValue;
-               numChars ++;
-
-               (*ptr)++;
-       }
-
-       return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-       /*
-        * Saved main processor registers
-        */
-       printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-              regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-              regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-       printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-              regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-              regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-       printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-              regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-              regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-       printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-              regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-              regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-       /*
-        * Saved cp0 registers
-        */
-       printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-              regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-       unsigned long addr;
-       unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-       union mips_instruction insn;
-       unsigned long targ;
-       int is_branch, is_cond, i;
-
-       targ = regs->cp0_epc;
-       insn.word = *(unsigned int *)targ;
-       is_branch = is_cond = 0;
-
-       switch (insn.i_format.opcode) {
-       /*
-        * jr and jalr are in r_format format.
-        */
-       case spec_op:
-               switch (insn.r_format.func) {
-               case jalr_op:
-               case jr_op:
-                       targ = *(&regs->reg0 + insn.r_format.rs);
-                       is_branch = 1;
-                       break;
-               }
-               break;
-
-       /*
-        * This group contains:
-        * bltz_op, bgez_op, bltzl_op, bgezl_op,
-        * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-        */
-       case bcond_op:
-               is_branch = is_cond = 1;
-               targ += 4 + (insn.i_format.simmediate << 2);
-               break;
-
-       /*
-        * These are unconditional and in j_format.
-        */
-       case jal_op:
-       case j_op:
-               is_branch = 1;
-               targ += 4;
-               targ >>= 28;
-               targ <<= 28;
-               targ |= (insn.j_format.target << 2);
-               break;
-
-       /*
-        * These are conditional.
-        */
-       case beq_op:
-       case beql_op:
-       case bne_op:
-       case bnel_op:
-       case blez_op:
-       case blezl_op:
-       case bgtz_op:
-       case bgtzl_op:
-       case cop0_op:
-       case cop1_op:
-       case cop2_op:
-       case cop1x_op:
-               is_branch = is_cond = 1;
-               targ += 4 + (insn.i_format.simmediate << 2);
-               break;
-       }
-
-       if (is_branch) {
-               i = 0;
-               if (is_cond && targ != (regs->cp0_epc + 8)) {
-                       step_bp[i].addr = regs->cp0_epc + 8;
-                       step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-                       *(unsigned *)(regs->cp0_epc + 8) = BP;
-               }
-               step_bp[i].addr = targ;
-               step_bp[i].val  = *(unsigned *)targ;
-               *(unsigned *)targ = BP;
-       } else {
-               step_bp[0].addr = regs->cp0_epc + 4;
-               step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-               *(unsigned *)(regs->cp0_epc + 4) = BP;
-       }
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-       /* skip breaking into userland */
-       if ((*epc & 0x80000000) == 0)
-               return;
-
-#ifdef CONFIG_SMP
-       /* avoid deadlock if someone is make IPC */
-       if (spin_is_locked(&smp_call_lock))
-               return;
-#endif
-
-       async_bp.addr = *epc;
-       *epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-       unsigned flags;
-       int cpu = smp_processor_id();
-
-       local_irq_save(flags);
-
-       __raw_spin_lock(&kgdb_cpulock[cpu]);
-       __raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-       local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-       cpumask_t mask = cpu_online_map;
-       struct call_data_struct data;
-       int cpu = smp_processor_id();
-       int cpus;
-
-       /*
-        * Can die spectacularly if this CPU isn't yet marked online
-        */
-       BUG_ON(!cpu_online(cpu));
-
-       cpu_clear(cpu, mask);
-       cpus = cpus_weight(mask);
-       if (!cpus)
-               return 0;
-
-       if (spin_is_locked(&smp_call_lock)) {
-               /*
-                * Some other processor is trying to make us do something
-                * but we're not going to respond... give up
-                */
-               return -1;
-               }
-
-       /*
-        * We will continue here, accepting the fact that
-        * the kernel may deadlock if another CPU attempts
-        * to call smp_call_function now...
-        */
-
-       data.func = kgdb_wait;
-       data.info = NULL;
-       atomic_set(&data.started, 0);
-       data.wait = 0;
-
-       spin_lock(&smp_call_lock);
-       call_data = &data;
-       mb();
-
-       core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-       /* Wait for response */
-       /* FIXME: lock-up detection, backtrace on lock-up */
-       while (atomic_read(&data.started) != cpus)
-               barrier();
-
-       call_data = NULL;
-       spin_unlock(&smp_call_lock);
-#endif
-
-       return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-       int trap;                       /* Trap type */
-       int sigval;
-       long addr;
-       int length;
-       char *ptr;
-       unsigned long *stack;
-       int i;
-       int bflag = 0;
-
-       kgdb_started = 1;
-
-       /*
-        * acquire the big kgdb spinlock
-        */
-       if (!spin_trylock(&kgdb_lock)) {
-               /*
-                * some other CPU has the lock, we should go back to
-                * receive the gdb_wait IPC
-                */
-               return;
-       }
-
-       /*
-        * If we're in async_breakpoint(), restore the real EPC from
-        * the breakpoint.
-        */
-       if (regs->cp0_epc == (unsigned long)async_breakinst) {
-               regs->cp0_epc = async_bp.addr;
-               async_bp.addr = 0;
-       }
-
-       /*
-        * acquire the CPU spinlocks
-        */
-       for_each_online_cpu(i)
-               if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-                       panic("kgdb: couldn't get cpulock %d\n", i);
-
-       /*
-        * force other cpus to enter kgdb
-        */
-       kgdb_smp_call_kgdb_wait();
-
-       /*
-        * If we're in breakpoint() increment the PC
-        */
-       trap = (regs->cp0_cause & 0x7c) >> 2;
-       if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-               regs->cp0_epc += 4;
-
-       /*
-        * If we were single_stepping, restore the opcodes hoisted
-        * for the breakpoint[s].
-        */
-       if (step_bp[0].addr) {
-               *(unsigned *)step_bp[0].addr = step_bp[0].val;
-               step_bp[0].addr = 0;
-
-               if (step_bp[1].addr) {
-                       *(unsigned *)step_bp[1].addr = step_bp[1].val;
-                       step_bp[1].addr = 0;
-               }
-       }
-
-       stack = (long *)regs->reg29;                    /* stack ptr */
-       sigval = computeSignal(trap);
-
-       /*
-        * reply to host that an exception has occurred
-        */
-       ptr = output_buffer;
-
-       /*
-        * Send trap type (converted to signal)
-        */
-       *ptr++ = 'T';
-       *ptr++ = hexchars[sigval >> 4];
-       *ptr++ = hexchars[sigval & 0xf];
-
-       /*
-        * Send Error PC
-        */
-       *ptr++ = hexchars[REG_EPC >> 4];
-       *ptr++ = hexchars[REG_EPC & 0xf];
-       *ptr++ = ':';
-       ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-       *ptr++ = ';';
-
-       /*
-        * Send frame pointer
-        */
-       *ptr++ = hexchars[REG_FP >> 4];
-       *ptr++ = hexchars[REG_FP & 0xf];
-       *ptr++ = ':';
-       ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-       *ptr++ = ';';
-
-       /*
-        * Send stack pointer
-        */
-       *ptr++ = hexchars[REG_SP >> 4];
-       *ptr++ = hexchars[REG_SP & 0xf];
-       *ptr++ = ':';
-       ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-       *ptr++ = ';';
-
-       *ptr++ = 0;
-       putpacket(output_buffer);       /* send it off... */
-
-       /*
-        * Wait for input from remote GDB
-        */
-       while (1) {
-               output_buffer[0] = 0;
-               getpacket(input_buffer);
-
-               switch (input_buffer[0])
-               {
-               case '?':
-                       output_buffer[0] = 'S';
-                       output_buffer[1] = hexchars[sigval >> 4];
-                       output_buffer[2] = hexchars[sigval & 0xf];
-                       output_buffer[3] = 0;
-                       break;
-
-               /*
-                * Detach debugger; let CPU run
-                */
-               case 'D':
-                       putpacket(output_buffer);
-                       goto finish_kgdb;
-                       break;
-
-               case 'd':
-                       /* toggle debug flag */
-                       break;
-
-               /*
-                * Return the value of the CPU registers
-                */
-               case 'g':
-                       ptr = output_buffer;
-                       ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-                       ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-                       ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-                       ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-                       ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-                       ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-                       break;
-
-               /*
-                * set the value of the CPU registers - return OK
-                */
-               case 'G':
-               {
-                       ptr = &input_buffer[1];
-                       hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-                       ptr += 32*(2*sizeof(long));
-                       hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-                       ptr += 6*(2*sizeof(long));
-                       hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-                       ptr += 32*(2*sizeof(long));
-                       hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-                       ptr += 2*(2*sizeof(long));
-                       hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-                       ptr += 2*(2*sizeof(long));
-                       hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-                       strcpy(output_buffer, "OK");
-                }
-               break;
-
-               /*
-                * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-                */
-               case 'm':
-                       ptr = &input_buffer[1];
-
-                       if (hexToLong(&ptr, &addr)
-                               && *ptr++ == ','
-                               && hexToInt(&ptr, &length)) {
-                               if (mem2hex((char *)addr, output_buffer, length, 1))
-                                       break;
-                               strcpy(output_buffer, "E03");
-                       } else
-                               strcpy(output_buffer, "E01");
-                       break;
-
-               /*
-                * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-                */
-               case 'X':
-                       bflag = 1;
-                       /* fall through */
-
-               /*
-                * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-                */
-               case 'M':
-                       ptr = &input_buffer[1];
-
-                       if (hexToLong(&ptr, &addr)
-                               && *ptr++ == ','
-                               && hexToInt(&ptr, &length)
-                               && *ptr++ == ':') {
-                               if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-                                       strcpy(output_buffer, "OK");
-                               else
-                                       strcpy(output_buffer, "E03");
-                       }
-                       else
-                               strcpy(output_buffer, "E02");
-                       break;
-
-               /*
-                * cAA..AA    Continue at address AA..AA(optional)
-                */
-               case 'c':
-                       /* try to read optional parameter, pc unchanged if no parm */
-
-                       ptr = &input_buffer[1];
-                       if (hexToLong(&ptr, &addr))
-                               regs->cp0_epc = addr;
-
-                       goto exit_kgdb_exception;
-                       break;
-
-               /*
-                * kill the program; let us try to restart the machine
-                * Reset the whole machine.
-                */
-               case 'k':
-               case 'r':
-                       machine_restart("kgdb restarts machine");
-                       break;
-
-               /*
-                * Step to next instruction
-                */
-               case 's':
-                       /*
-                        * There is no single step insn in the MIPS ISA, so we
-                        * use breakpoints and continue, instead.
-                        */
-                       single_step(regs);
-                       goto exit_kgdb_exception;
-                       /* NOTREACHED */
-                       break;
-
-               /*
-                * Set baud rate (bBB)
-                * FIXME: Needs to be written
-                */
-               case 'b':
-               {
-#if 0
-                       int baudrate;
-                       extern void set_timer_3();
-
-                       ptr = &input_buffer[1];
-                       if (!hexToInt(&ptr, &baudrate))
-                       {
-                               strcpy(output_buffer, "B01");
-                               break;
-                       }
-
-                       /* Convert baud rate to uart clock divider */
-
-                       switch (baudrate)
-                       {
-                               case 38400:
-                                       baudrate = 16;
-                                       break;
-                               case 19200:
-                                       baudrate = 33;
-                                       break;
-                               case 9600:
-                                       baudrate = 65;
-                                       break;
-                               default:
-                                       baudrate = 0;
-                                       strcpy(output_buffer, "B02");
-                                       goto x1;
-                       }
-
-                       if (baudrate) {
-                               putpacket("OK");        /* Ack before changing speed */
-                               set_timer_3(baudrate); /* Set it */
-                       }
-#endif
-               }
-               break;
-
-               }                       /* switch */
-
-               /*
-                * reply to the request
-                */
-
-               putpacket(output_buffer);
-
-       } /* while */
-
-       return;
-
-finish_kgdb:
-       restore_debug_traps();
-
-exit_kgdb_exception:
-       /* release locks so other CPUs can go */
-       for_each_online_cpu(i)
-               __raw_spin_unlock(&kgdb_cpulock[i]);
-       spin_unlock(&kgdb_lock);
-
-       __flush_cache_all();
-       return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-       if (!initialized)
-               return;
-
-       __asm__ __volatile__(
-                       ".globl breakinst\n\t"
-                       ".set\tnoreorder\n\t"
-                       "nop\n"
-                       "breakinst:\tbreak\n\t"
-                       "nop\n\t"
-                       ".set\treorder"
-                       );
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-       __asm__ __volatile__(
-                       ".globl async_breakinst\n\t"
-                       ".set\tnoreorder\n\t"
-                       "nop\n"
-                       "async_breakinst:\tbreak\n\t"
-                       "nop\n\t"
-                       ".set\treorder"
-                       );
-}
-
-void adel(void)
-{
-       __asm__ __volatile__(
-                       ".globl\tadel\n\t"
-                       "lui\t$8,0x8000\n\t"
-                       "lw\t$9,1($8)\n\t"
-                       );
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-       return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-       kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-       char outbuf[18];
-
-       if (!kgdb_started)
-               return;
-
-       outbuf[0]='O';
-
-       while(l) {
-               int i = (l>8)?8:l;
-               mem2hex((char *)str, &outbuf[1], i, 0);
-               outbuf[(i*2)+1]=0;
-               putpacket(outbuf);
-               str += i;
-               l -= i;
-       }
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-       gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-       .name   = "gdb",
-       .write  = gdb_console_write,
-       .flags  = CON_PRINTBUFFER,
-       .index  = -1
-};
-
-static int __init register_gdb_console(void)
-{
-       register_console(&gdb_console);
-
-       return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
index 6045b9a51a35f74e218db115dc98b4554670b1e2..8acba0880d9ff69d63e21df5bcc1af517b2c878e 100644 (file)
@@ -126,19 +126,6 @@ asmlinkage void spurious_interrupt(void)
        atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-       kgdb_flag = 0;
-       return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
        int i;
@@ -147,12 +134,4 @@ void __init init_IRQ(void)
                set_irq_noprobe(i);
 
        arch_init_irq();
-
-#ifdef CONFIG_KGDB
-       if (kgdb_flag) {
-               printk("Wait for gdb client connection ...\n");
-               set_debug_traps();
-               breakpoint();
-       }
-#endif
 }
index f8064446e812994617a2eede971ce109c6855673..3b7dd722c32a68ff83881d3200e769660678b899 100644 (file)
@@ -13,7 +13,6 @@ obj-y                         := malta-amon.o malta-cmdline.o \
 
 obj-$(CONFIG_EARLY_PRINTK)     += malta-console.o
 obj-$(CONFIG_PCI)              += malta-pci.o
-obj-$(CONFIG_KGDB)             += malta-kgdb.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)     += malta_smtc.o
index c0653021a17112e8d07a4048841211268e3aefdf..4832af2516680d4ac653ac31017f6a6960bab0d6 100644 (file)
 
 #include <asm/mips-boards/malta.h>
 
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
 int prom_argc;
 int *_prom_argv, *_prom_envp;
 
@@ -173,51 +164,6 @@ static void __init console_config(void)
 }
 #endif
 
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-       extern int (*generic_putDebugChar)(char);
-       extern char (*generic_getDebugChar)(void);
-       char *argptr;
-       int line, speed;
-
-       argptr = prom_getcmdline();
-       if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-               argptr += strlen("kgdb=ttyS");
-               if (*argptr != '0' && *argptr != '1')
-                       printk("KGDB: Unknown serial line /dev/ttyS%c, "
-                              "falling back to /dev/ttyS1\n", *argptr);
-               line = *argptr == '0' ? 0 : 1;
-               printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-               speed = 0;
-               if (*++argptr == ',')
-               {
-                       int c;
-                       while ((c = *++argptr) && ('0' <= c && c <= '9'))
-                               speed = speed * 10 + c - '0';
-               }
-               {
-                       speed = rs_kgdb_hook(line, speed);
-                       generic_putDebugChar = rs_putDebugChar;
-                       generic_getDebugChar = rs_getDebugChar;
-               }
-
-               pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-                       "session, please connect your debugger\n",
-                       line ? 1 : 0, speed);
-
-               {
-                       char *s;
-                       for (s = "Please connect GDB to this port\r\n"; *s; )
-                               generic_putDebugChar(*s++);
-               }
-
-               /* Breakpoint is invoked after interrupts are initialised */
-       }
-}
-#endif
-
 static void __init mips_nmi_setup(void)
 {
        void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644 (file)
index 6a1854d..0000000
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-       SERIAL_PORT_DFNS        /* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-       return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-                               int value)
-{
-       outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-       int t;
-       struct serial_state *ser = &rs_table[tty_no];
-
-       kdb_port_info.state = ser;
-       kdb_port_info.magic = SERIAL_MAGIC;
-       kdb_port_info.port = ser->port;
-       kdb_port_info.flags = ser->flags;
-
-       /*
-        * Clear all interrupts
-        */
-       serial_in(&kdb_port_info, UART_LSR);
-       serial_in(&kdb_port_info, UART_RX);
-       serial_in(&kdb_port_info, UART_IIR);
-       serial_in(&kdb_port_info, UART_MSR);
-
-       /*
-        * Now, initialize the UART
-        */
-       serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);   /* reset DLAB */
-       if (kdb_port_info.flags & ASYNC_FOURPORT) {
-               kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-               t = UART_MCR_DTR | UART_MCR_OUT1;
-       } else {
-               kdb_port_info.MCR
-                       = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-               t = UART_MCR_DTR | UART_MCR_RTS;
-       }
-
-       kdb_port_info.MCR = t;          /* no interrupts, please */
-       serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-       /*
-        * and set the speed of the serial port
-        */
-       if (speed == 0)
-               speed = 9600;
-
-       t = kdb_port_info.state->baud_base / speed;
-       /* set DLAB */
-       serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-       serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-       serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-       /* reset DLAB */
-       serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-       return speed;
-}
-
-int putDebugChar(char c)
-{
-       return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-       return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-       if (!kdb_port_info.state) {     /* need to init device first */
-               return 0;
-       }
-
-       while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-               ;
-
-       serial_out(&kdb_port_info, UART_TX, c);
-
-       return 1;
-}
-
-char rs_getDebugChar(void)
-{
-       if (!kdb_port_info.state) {     /* need to init device first */
-               return 0;
-       }
-
-       while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-               ;
-
-       return serial_in(&kdb_port_info, UART_RX);
-}
index e7cad54936ca3ce9164219ae7043dbe16a9776ae..dc78b8983eeb2688b0fbae098561b53a9885c028 100644 (file)
@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
         */
        enable_dma(4);
 
-#ifdef CONFIG_KGDB
-       kgdb_config();
-#endif
-
 #ifdef CONFIG_DMA_COHERENT
        if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
                panic("Hardware DMA cache coherency not supported");
index 31cc1a5cec3b165379d34b0514ea9ba8056c376b..dd9e7b1f7fd34f7e9d3bfb0d16bd91b0e8e02f8a 100644 (file)
@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644 (file)
index ad4624f..0000000
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-       struct serial_state *ser = &rs_table[tty_no];
-
-       kdb_port_info.state = ser;
-       kdb_port_info.magic = SERIAL_MAGIC;
-       kdb_port_info.port  = tty_no;
-       kdb_port_info.flags = ser->flags;
-
-       /*
-        * Clear all interrupts
-        */
-       /* Clear all the transmitter FIFO counters (pointer and status) */
-       ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-       /* Clear all the receiver FIFO counters (pointer and status) */
-       ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-       /* Clear all interrupts */
-       ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-               IP3106_UART_INT_ALLTX;
-
-       /*
-        * Now, initialize the UART
-        */
-       ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-       ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-       /* Wait until FIFO not full */
-       while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-               ;
-       /* Send one char */
-       ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-       return 1;
-}
-
-char getDebugChar(void)
-{
-       char ch;
-
-       /* Wait until there is a char in the FIFO */
-       while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-                                       IP3106_UART_FIFO_RXFIFO) >> 8))
-               ;
-       /* Read one char */
-       ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-               IP3106_UART_FIFO_RBRTHR;
-       /* Advance the RX FIFO read pointer */
-       ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-       return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-       ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-       /* Clear all the transmitter FIFO counters (pointer and status) */
-       ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-       /* Clear all the receiver FIFO counters (pointer and status) */
-       ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-       /* Clear all interrupts */
-       ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-               IP3106_UART_INT_ALLTX;
-       ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
index aad03429a5e3f65aab895ce7fd04473f94ebd3e0..f080f114a1bf6d343baba163b88958f9ee406cf3 100644 (file)
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
index 18b125e3b65d4a222fa1a2f7ae210611687d5889..acf1fa88944456119619e57d2813041e3eb04b20 100644 (file)
@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
index 92d764c977014da47ddaf72813dbd67344eef478..2aed50fef10ff8b800a58c8cdc0551d654b8fbf8 100644 (file)
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
                ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
        }
 
-#ifdef CONFIG_KGDB
-       argptr = prom_getcmdline();
-       if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-               int line;
-               argptr += strlen("kgdb=ttyS");
-               line = *argptr == '0' ? 0 : 1;
-               rs_kgdb_hook(line);
-               pr_info("KGDB: Using ttyS%i for session, "
-                       "please connect your debugger\n", line ? 1 : 0);
-       }
-#endif
        return;
 }
index 9de34302e5f4004ef21ba4b8de6c4f1771fb47f3..f7261628d8a60ec209d346232dbeab94874acb18 100644 (file)
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-       volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-       uint32_t val = (uint32_t)c;
-
-       local_irq_disable();
-       while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-       uart[0] = val;
-       while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-       local_irq_enable();
-
-       return 1;
-}
-
-char getDebugChar(void)
-{
-       volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-       uint32_t val;
-
-       while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-       val = uart[0];
-
-       return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-       unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-       /* Enable FIFOs */
-       writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-                       UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-               (char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-       /* Select brtc divisor */
-       writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-       /* Store divisor lsb */
-       writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-       /* Store divisor msb */
-       writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-       /* Set 8N1 mode */
-       writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-       /* Disable flow control */
-       writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-       /* Disable receive interrupt(!) */
-       writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
        char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
                case MACH_MSP7120_FPGA:
                        /* Enable UART1 on MSP4200 and MSP7120 */
                        *GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-                       /* Initialize UART1 for kgdb since PMON doesn't */
-                       if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-                               if( mips_machtype == MACH_MSP4200_FPGA
-                                || mips_machtype == MACH_MSP7120_FPGA )
-                                       initDebugPort(uartclk, 19200);
-                               else
-                                       initDebugPort(uartclk, 57600);
-                       }
-#endif
                        break;
 
                default:
index 8fd9a04e353487bed0942e40fbc6cccf3fbc6c9b..b16f95c3df654a089a33b7b9655228863421e865 100644 (file)
@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)             += dbg_io.o
 obj-$(CONFIG_SMP)              += smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644 (file)
index 6362c70..0000000
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define        YOSEMITE_BAUD_2400      2400
-#define        YOSEMITE_BAUD_4800      4800
-#define        YOSEMITE_BAUD_9600      9600
-#define        YOSEMITE_BAUD_19200     19200
-#define        YOSEMITE_BAUD_38400     38400
-#define        YOSEMITE_BAUD_57600     57600
-#define        YOSEMITE_BAUD_115200    115200
-
-#define        YOSEMITE_PARITY_NONE    0
-#define        YOSEMITE_PARITY_ODD     0x08
-#define        YOSEMITE_PARITY_EVEN    0x18
-#define        YOSEMITE_PARITY_MARK    0x28
-#define        YOSEMITE_PARITY_SPACE   0x38
-
-#define        YOSEMITE_DATA_5BIT      0x0
-#define        YOSEMITE_DATA_6BIT      0x1
-#define        YOSEMITE_DATA_7BIT      0x2
-#define        YOSEMITE_DATA_8BIT      0x3
-
-#define        YOSEMITE_STOP_1BIT      0x0
-#define        YOSEMITE_STOP_2BIT      0x4
-
-/* This is crucial */
-#define        SERIAL_REG_OFS          0x1
-
-#define        SERIAL_RCV_BUFFER       0x0
-#define        SERIAL_TRANS_HOLD       0x0
-#define        SERIAL_SEND_BUFFER      0x0
-#define        SERIAL_INTR_ENABLE      (1 * SERIAL_REG_OFS)
-#define        SERIAL_INTR_ID          (2 * SERIAL_REG_OFS)
-#define        SERIAL_DATA_FORMAT      (3 * SERIAL_REG_OFS)
-#define        SERIAL_LINE_CONTROL     (3 * SERIAL_REG_OFS)
-#define        SERIAL_MODEM_CONTROL    (4 * SERIAL_REG_OFS)
-#define        SERIAL_RS232_OUTPUT     (4 * SERIAL_REG_OFS)
-#define        SERIAL_LINE_STATUS      (5 * SERIAL_REG_OFS)
-#define        SERIAL_MODEM_STATUS     (6 * SERIAL_REG_OFS)
-#define        SERIAL_RS232_INPUT      (6 * SERIAL_REG_OFS)
-#define        SERIAL_SCRATCH_PAD      (7 * SERIAL_REG_OFS)
-
-#define        SERIAL_DIVISOR_LSB      (0 * SERIAL_REG_OFS)
-#define        SERIAL_DIVISOR_MSB      (1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define        SERIAL_READ(ofs)                (*((volatile unsigned char*)    \
-                                       (TITAN_SERIAL_BASE + ofs)))
-
-#define        SERIAL_WRITE(ofs, val)          ((*((volatile unsigned char*)   \
-                                       (TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define        SERIAL_READ_1(ofs)              (*((volatile unsigned char*)    \
-                                       (TITAN_SERIAL_BASE_1 + ofs)))
-
-#define        SERIAL_WRITE_1(ofs, val)        ((*((volatile unsigned char*)   \
-                                       (TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-       /* Disable Interrupts */
-       SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-       SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-       {
-               unsigned int divisor;
-
-               SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-               divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-               SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-               SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-                              (divisor & 0xff00) >> 8);
-               SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-       }
-
-       SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-                      YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-       /* Enable Interrupts */
-       SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-              unsigned char stop)
-{
-       /* Disable Interrupts */
-       SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-       SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-       {
-               unsigned int divisor;
-
-               SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-               divisor = TITAN_SERIAL_BASE_BAUD / baud;
-               SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-               SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-               SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-       }
-
-       SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(YOSEMITE_BAUD_115200,
-                         YOSEMITE_DATA_8BIT,
-                         YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-       }
-
-       while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-       return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(YOSEMITE_BAUD_115200,
-                         YOSEMITE_DATA_8BIT,
-                         YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-       }
-
-       while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-       SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-       return 1;
-}
index 4decc28078673203a4355c9d7c64950a25c6d6c7..5f673eba142cf6a600e5c4159d84f72f0f6cf6b8 100644 (file)
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
        }
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
        rm7k_cpu_irq_init();
        rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-       /* At this point, initialize the second serial port */
-       init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
        register_gdb_console();
 #endif
index 5f389ee26fca034eb5c8f0cc6b961a15d9b3a6fe..896a1ef8482962e5376a37487693f5b87183f053 100644 (file)
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
                add_preferred_console("arc", 0, NULL);
        }
 
-#ifdef CONFIG_KGDB
-       {
-       char *kgdb_ttyd = prom_getcmdline();
-
-       if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-               int line;
-               kgdb_ttyd += strlen("kgdb=ttyd");
-               if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-                       printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-                              ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-               line = *kgdb_ttyd == '2' ? 0 : 1;
-               printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-                      "session\n", line ? 1 : 2);
-               rs_kgdb_hook(line);
-
-               printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-                      "session, please connect your debugger\n", line ? 1:2);
-
-               kgdb_enabled = 1;
-               /* Breakpoints and stuff are in sgi_irq_setup() */
-       }
-       }
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
        {
                ULONG *gfxinfo;
index e0a6871d56e4501f947c662d19ba2267bad07d20..31f4931b8484334d60cdd0ea6ccc0b3ea214b2de 100644 (file)
@@ -7,7 +7,6 @@ obj-y   := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
           ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)     += ip27-console.o
-obj-$(CONFIG_KGDB)             += ip27-dbgio.o
 obj-$(CONFIG_SMP)              += ip27-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644 (file)
index 08fd88b..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-       struct ioc3 *ioc3;
-
-       ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-       return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-       struct ioc3_uartregs *uart = console_uart();
-
-       while ((uart->iu_lsr & UART_LSR_DR) == 0);
-       return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-       struct ioc3_uartregs *uart = console_uart();
-
-       while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-       uart->iu_thr = c;
-}
index db372a0f106d1e8631aff8c001ba2891448aebb7..a35818ed42639c8548537546d82eae9f35f23674 100644 (file)
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-       kgdb_flag = 0;
-       return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
        .name = "BCM1480-IMR",
        .ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
         * does its own management of IP7.
         */
 
-#ifdef CONFIG_KGDB
-       imask |= STATUSF_IP6;
-#endif
        /* Enable necessary IPs, disable the rest */
        change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-       if (kgdb_flag) {
-               kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-               sb1250_duart_present[kgdb_port] = 0;
-#endif
-               /* Setup uart 1 settings, mapper */
-               /* QQQ FIXME */
-               __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-               __raw_writeq(IMR_IP6_VAL,
-                            IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-                            (kgdb_irq << 3)));
-               bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-               register_gdb_console();
-#endif
-               printk("Waiting for GDB on UART port %d\n", kgdb_port);
-               set_debug_traps();
-               breakpoint();
-       }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-       /*
-        * Clear break-change status (allow some time for the remote
-        * host to stop the break, since we would see another
-        * interrupt on the end-of-break too)
-        */
-       kstat.irqs[smp_processor_id()][kgdb_irq]++;
-       mdelay(500);
-       duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-                               M_DUART_RX_EN | M_DUART_TX_EN);
-       set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif         /* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
                bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-       else if (pending & CAUSEF_IP6)
-               bcm1480_kgdb_interrupt();               /* KGDB (uart 1) */
-#endif
-
        else if (pending & CAUSEF_IP2)
                dispatch_ip2();
 }
index fd9604d5555ac64d731e6ce2c56da1b171af07f0..3de30f79db3f33dcbf945bca58389456af40e1f3 100644 (file)
@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
        int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
        int argc = fw_arg0;
        char **envp = (char **) fw_arg2;
        int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-       char *arg;
-#endif
 
        _machine_restart   = cfe_linux_restart;
        _machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
                }
        }
 
-#ifdef CONFIG_KGDB
-       if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-               kgdb_port = (arg[10] == '0') ? 0 : 1;
-       else
-               kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
        {
                char *ptr;
index eac9065ffe0ccc4c5f0811f8ee20d45375abd21f..a5158483986e878dd7d935a439d6c2b0c1f98d2e 100644 (file)
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
        .name = "SB1250-IMR",
        .ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
         * does its own management of IP7.
         */
 
-#ifdef CONFIG_KGDB
-       imask |= STATUSF_IP6;
-#endif
        /* Enable necessary IPs, disable the rest */
        change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-       if (kgdb_flag) {
-               kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-               sb1250_duart_present[kgdb_port] = 0;
-#endif
-               /* Setup uart 1 settings, mapper */
-               __raw_writeq(M_DUART_IMR_BRK,
-                            IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-               __raw_writeq(IMR_IP6_VAL,
-                            IOADDR(A_IMR_REGISTER(0,
-                                                  R_IMR_INTERRUPT_MAP_BASE) +
-                                   (kgdb_irq << 3)));
-               sb1250_unmask_irq(0, kgdb_irq);
-       }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-       /*
-        * Clear break-change status (allow some time for the remote
-        * host to stop the break, since we would see another
-        * interrupt on the end-of-break too)
-        */
-       kstat_this_cpu.irqs[kgdb_irq]++;
-       mdelay(500);
-       duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-                               M_DUART_RX_EN | M_DUART_TX_EN);
-       set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif         /* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
                sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-       else if (pending & CAUSEF_IP6)                  /* KGDB (uart 1) */
-               sb1250_kgdb_interrupt();
-#endif
-
        else if (pending & CAUSEF_IP2)
                dispatch_ip2();
        else
index 255d692bfa188c6df2d59d9a167644396d4d1b15..f18ba9201bbcd7eda4a1336c545694f84841abcd 100644 (file)
@@ -1,4 +1,3 @@
 obj-y                          := setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)    += swarm-i2c.o
-obj-$(CONFIG_KGDB)             += dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644 (file)
index b97ae30..0000000
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- *     115200, 8, N, 1.
- */
-
-#define        BAUD_RATE               115200
-#define        CLK_DIVISOR             V_DUART_BAUD_RATE(BAUD_RATE)
-#define        DATA_BITS               V_DUART_BITS_PER_CHAR_8         /* or 7    */
-#define        PARITY                  V_DUART_PARITY_MODE_NONE        /* or even */
-#define        STOP_BITS               M_DUART_STOP_BIT_LEN_1          /* or 2    */
-
-static int duart_initialized = 0;      /* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define        duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)          csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-       duart_out(R_DUART_MODE_REG_1, data | parity);
-       duart_out(R_DUART_MODE_REG_2, stop);
-       duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-       duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);  /* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-       if (!duart_initialized) {
-               duart_initialized = 1;
-               duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-       }
-       while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-       duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-       if (!duart_initialized) {
-               duart_initialized = 1;
-               duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-       }
-       while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-       return duart_in(R_DUART_RX_HOLD);
-}
-
index d1dd1195036fbc7bdbfdfed66a961c45aaac223e..840fe757c48d836faa36b77b1c94e32585552b70 100644 (file)
@@ -60,7 +60,6 @@ config SOC_TX4927
        select HW_HAS_PCI
        select IRQ_TXX9
        select PCI_TX4927
-       select SYS_SUPPORTS_KGDB
        select GPIO_TXX9
 
 config SOC_TX4938
@@ -70,7 +69,6 @@ config SOC_TX4938
        select HW_HAS_PCI
        select IRQ_TXX9
        select PCI_TX4927
-       select SYS_SUPPORTS_KGDB
        select GPIO_TXX9
 
 config TOSHIBA_FPCIB0
index 57ed07bf030d12bf625a5e921a64ca60a6d5582b..9bb34af26b733260bb2810d403dd3acb3c601798 100644 (file)
@@ -8,6 +8,5 @@ obj-$(CONFIG_SOC_TX3927)        += setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)       += mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)       += mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)   += smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)     += dbgio.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c
deleted file mode 100644 (file)
index 33b9c67..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-       return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-       return (txx9_sio_kdbg_wr(byte));
-}
-
index ba292c9456691be2bfa1f8d5366a9f369f1a7bd7..20d61ac543e59b102591e86bae9432cfdb252498 100644 (file)
@@ -3,6 +3,5 @@
 #
 
 obj-y  += prom.o irq.o setup.o
-obj-$(CONFIG_KGDB)     += kgdb_io.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c
deleted file mode 100644 (file)
index 5bd757e..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *     Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *             ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(38400);
-       }
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-       tx3927_sioptr(0)->tfifo = c;
-
-       return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-       int dicr;
-       char c;
-
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(38400);
-       }
-
-       /* diable RX int. */
-       dicr = tx3927_sioptr(0)->dicr;
-       tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-               ;
-       c = tx3927_sioptr(0)->rfifo;
-
-       /* clear RX int. status */
-       tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-       /* enable RX int. */
-       tx3927_sioptr(0)->dicr = dicr;
-
-       return c;
-}
-
-static void debugInit(int baud)
-{
-       tx3927_sioptr(0)->lcr = 0x020;
-       tx3927_sioptr(0)->dicr = 0;
-       tx3927_sioptr(0)->disr = 0x4100;
-       tx3927_sioptr(0)->cisr = 0x014;
-       tx3927_sioptr(0)->fcr = 0;
-       tx3927_sioptr(0)->flcr = 0x02;
-       tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-               TXx927_SIBGR_BCLK_T0;
-}
diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h
deleted file mode 100644 (file)
index 22f67d4..0000000
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC                        37
-#define REG_FP                 72
-#define REG_SP                 29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS                        90
-
-#define GDB_FR_REG0            (PTRSIZE*6)                     /* 0 */
-#define GDB_FR_REG1            ((GDB_FR_REG0) + LONGSIZE)      /* 1 */
-#define GDB_FR_REG2            ((GDB_FR_REG1) + LONGSIZE)      /* 2 */
-#define GDB_FR_REG3            ((GDB_FR_REG2) + LONGSIZE)      /* 3 */
-#define GDB_FR_REG4            ((GDB_FR_REG3) + LONGSIZE)      /* 4 */
-#define GDB_FR_REG5            ((GDB_FR_REG4) + LONGSIZE)      /* 5 */
-#define GDB_FR_REG6            ((GDB_FR_REG5) + LONGSIZE)      /* 6 */
-#define GDB_FR_REG7            ((GDB_FR_REG6) + LONGSIZE)      /* 7 */
-#define GDB_FR_REG8            ((GDB_FR_REG7) + LONGSIZE)      /* 8 */
-#define GDB_FR_REG9            ((GDB_FR_REG8) + LONGSIZE)      /* 9 */
-#define GDB_FR_REG10           ((GDB_FR_REG9) + LONGSIZE)      /* 10 */
-#define GDB_FR_REG11           ((GDB_FR_REG10) + LONGSIZE)     /* 11 */
-#define GDB_FR_REG12           ((GDB_FR_REG11) + LONGSIZE)     /* 12 */
-#define GDB_FR_REG13           ((GDB_FR_REG12) + LONGSIZE)     /* 13 */
-#define GDB_FR_REG14           ((GDB_FR_REG13) + LONGSIZE)     /* 14 */
-#define GDB_FR_REG15           ((GDB_FR_REG14) + LONGSIZE)     /* 15 */
-#define GDB_FR_REG16           ((GDB_FR_REG15) + LONGSIZE)     /* 16 */
-#define GDB_FR_REG17           ((GDB_FR_REG16) + LONGSIZE)     /* 17 */
-#define GDB_FR_REG18           ((GDB_FR_REG17) + LONGSIZE)     /* 18 */
-#define GDB_FR_REG19           ((GDB_FR_REG18) + LONGSIZE)     /* 19 */
-#define GDB_FR_REG20           ((GDB_FR_REG19) + LONGSIZE)     /* 20 */
-#define GDB_FR_REG21           ((GDB_FR_REG20) + LONGSIZE)     /* 21 */
-#define GDB_FR_REG22           ((GDB_FR_REG21) + LONGSIZE)     /* 22 */
-#define GDB_FR_REG23           ((GDB_FR_REG22) + LONGSIZE)     /* 23 */
-#define GDB_FR_REG24           ((GDB_FR_REG23) + LONGSIZE)     /* 24 */
-#define GDB_FR_REG25           ((GDB_FR_REG24) + LONGSIZE)     /* 25 */
-#define GDB_FR_REG26           ((GDB_FR_REG25) + LONGSIZE)     /* 26 */
-#define GDB_FR_REG27           ((GDB_FR_REG26) + LONGSIZE)     /* 27 */
-#define GDB_FR_REG28           ((GDB_FR_REG27) + LONGSIZE)     /* 28 */
-#define GDB_FR_REG29           ((GDB_FR_REG28) + LONGSIZE)     /* 29 */
-#define GDB_FR_REG30           ((GDB_FR_REG29) + LONGSIZE)     /* 30 */
-#define GDB_FR_REG31           ((GDB_FR_REG30) + LONGSIZE)     /* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS          ((GDB_FR_REG31) + LONGSIZE)     /* 32 */
-#define GDB_FR_LO              ((GDB_FR_STATUS) + LONGSIZE)    /* 33 */
-#define GDB_FR_HI              ((GDB_FR_LO) + LONGSIZE)        /* 34 */
-#define GDB_FR_BADVADDR                ((GDB_FR_HI) + LONGSIZE)        /* 35 */
-#define GDB_FR_CAUSE           ((GDB_FR_BADVADDR) + LONGSIZE)  /* 36 */
-#define GDB_FR_EPC             ((GDB_FR_CAUSE) + LONGSIZE)     /* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0            ((GDB_FR_EPC) + LONGSIZE)       /* 38 */
-#define GDB_FR_FPR1            ((GDB_FR_FPR0) + LONGSIZE)      /* 39 */
-#define GDB_FR_FPR2            ((GDB_FR_FPR1) + LONGSIZE)      /* 40 */
-#define GDB_FR_FPR3            ((GDB_FR_FPR2) + LONGSIZE)      /* 41 */
-#define GDB_FR_FPR4            ((GDB_FR_FPR3) + LONGSIZE)      /* 42 */
-#define GDB_FR_FPR5            ((GDB_FR_FPR4) + LONGSIZE)      /* 43 */
-#define GDB_FR_FPR6            ((GDB_FR_FPR5) + LONGSIZE)      /* 44 */
-#define GDB_FR_FPR7            ((GDB_FR_FPR6) + LONGSIZE)      /* 45 */
-#define GDB_FR_FPR8            ((GDB_FR_FPR7) + LONGSIZE)      /* 46 */
-#define GDB_FR_FPR9            ((GDB_FR_FPR8) + LONGSIZE)      /* 47 */
-#define GDB_FR_FPR10           ((GDB_FR_FPR9) + LONGSIZE)      /* 48 */
-#define GDB_FR_FPR11           ((GDB_FR_FPR10) + LONGSIZE)     /* 49 */
-#define GDB_FR_FPR12           ((GDB_FR_FPR11) + LONGSIZE)     /* 50 */
-#define GDB_FR_FPR13           ((GDB_FR_FPR12) + LONGSIZE)     /* 51 */
-#define GDB_FR_FPR14           ((GDB_FR_FPR13) + LONGSIZE)     /* 52 */
-#define GDB_FR_FPR15           ((GDB_FR_FPR14) + LONGSIZE)     /* 53 */
-#define GDB_FR_FPR16           ((GDB_FR_FPR15) + LONGSIZE)     /* 54 */
-#define GDB_FR_FPR17           ((GDB_FR_FPR16) + LONGSIZE)     /* 55 */
-#define GDB_FR_FPR18           ((GDB_FR_FPR17) + LONGSIZE)     /* 56 */
-#define GDB_FR_FPR19           ((GDB_FR_FPR18) + LONGSIZE)     /* 57 */
-#define GDB_FR_FPR20           ((GDB_FR_FPR19) + LONGSIZE)     /* 58 */
-#define GDB_FR_FPR21           ((GDB_FR_FPR20) + LONGSIZE)     /* 59 */
-#define GDB_FR_FPR22           ((GDB_FR_FPR21) + LONGSIZE)     /* 60 */
-#define GDB_FR_FPR23           ((GDB_FR_FPR22) + LONGSIZE)     /* 61 */
-#define GDB_FR_FPR24           ((GDB_FR_FPR23) + LONGSIZE)     /* 62 */
-#define GDB_FR_FPR25           ((GDB_FR_FPR24) + LONGSIZE)     /* 63 */
-#define GDB_FR_FPR26           ((GDB_FR_FPR25) + LONGSIZE)     /* 64 */
-#define GDB_FR_FPR27           ((GDB_FR_FPR26) + LONGSIZE)     /* 65 */
-#define GDB_FR_FPR28           ((GDB_FR_FPR27) + LONGSIZE)     /* 66 */
-#define GDB_FR_FPR29           ((GDB_FR_FPR28) + LONGSIZE)     /* 67 */
-#define GDB_FR_FPR30           ((GDB_FR_FPR29) + LONGSIZE)     /* 68 */
-#define GDB_FR_FPR31           ((GDB_FR_FPR30) + LONGSIZE)     /* 69 */
-
-#define GDB_FR_FSR             ((GDB_FR_FPR31) + LONGSIZE)     /* 70 */
-#define GDB_FR_FIR             ((GDB_FR_FSR) + LONGSIZE)       /* 71 */
-#define GDB_FR_FRP             ((GDB_FR_FIR) + LONGSIZE)       /* 72 */
-
-#define GDB_FR_DUMMY           ((GDB_FR_FRP) + LONGSIZE)       /* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX       ((GDB_FR_DUMMY) + LONGSIZE)     /* 74 */
-#define GDB_FR_CP0_RANDOM      ((GDB_FR_CP0_INDEX) + LONGSIZE) /* 75 */
-#define GDB_FR_CP0_ENTRYLO0    ((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1    ((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT     ((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK    ((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED       ((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7                ((GDB_FR_CP0_WIRED) + LONGSIZE) /* 81 */
-#define GDB_FR_CP0_REG8                ((GDB_FR_CP0_REG7) + LONGSIZE)  /* 82 */
-#define GDB_FR_CP0_REG9                ((GDB_FR_CP0_REG8) + LONGSIZE)  /* 83 */
-#define GDB_FR_CP0_ENTRYHI     ((GDB_FR_CP0_REG9) + LONGSIZE)  /* 84 */
-#define GDB_FR_CP0_REG11       ((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12       ((GDB_FR_CP0_REG11) + LONGSIZE) /* 86 */
-#define GDB_FR_CP0_REG13       ((GDB_FR_CP0_REG12) + LONGSIZE) /* 87 */
-#define GDB_FR_CP0_REG14       ((GDB_FR_CP0_REG13) + LONGSIZE) /* 88 */
-#define GDB_FR_CP0_PRID                ((GDB_FR_CP0_REG14) + LONGSIZE) /* 89 */
-
-#define GDB_FR_SIZE            ((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-       /*
-        * Pad bytes for argument save space on the stack
-        * 24/48 Bytes for 32/64 bit code
-        */
-       unsigned long pad0[6];
-
-       /*
-        * saved main processor registers
-        */
-       long     reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
-       long     reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
-       long    reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
-       long    reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
-       /*
-        * Saved special registers
-        */
-       long    cp0_status;
-       long    lo;
-       long    hi;
-       long    cp0_badvaddr;
-       long    cp0_cause;
-       long    cp0_epc;
-
-       /*
-        * Saved floating point registers
-        */
-       long    fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
-       long    fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
-       long    fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
-       long    fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
-       long    cp1_fsr;
-       long    cp1_fir;
-
-       /*
-        * Frame pointer
-        */
-       long    frame_ptr;
-       long    dummy;          /* unused */
-
-       /*
-        * saved cp0 registers
-        */
-       long    cp0_index;
-       long    cp0_random;
-       long    cp0_entrylo0;
-       long    cp0_entrylo1;
-       long    cp0_context;
-       long    cp0_pagemask;
-       long    cp0_wired;
-       long    cp0_reg7;
-       long    cp0_reg8;
-       long    cp0_reg9;
-       long    cp0_entryhi;
-       long    cp0_reg11;
-       long    cp0_reg12;
-       long    cp0_reg13;
-       long    cp0_reg14;
-       long    cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */