+++ /dev/null
-/* Definitions for DigiBoard ditty(1) command. */
-
-#if !defined(TIOCMODG)
-#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */
-#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */
-#endif
-
-#if !defined(TIOCMSET)
-#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */
-#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */
-#endif
-
-#if !defined(TIOCMBIC)
-#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */
-#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */
-#endif
-
-#if !defined(TIOCSDTR)
-#define TIOCSDTR (('e'<<8) | 0) /* set DTR */
-#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */
-#endif
-
-/************************************************************************
- * Ioctl command arguments for DIGI parameters.
- ************************************************************************/
-#define DIGI_GETA (('e'<<8) | 94) /* Read params */
-
-#define DIGI_SETA (('e'<<8) | 95) /* Set params */
-#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */
-#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */
-
-#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */
- /* control characters */
-#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */
- /* control characters */
-#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */
- /* flow control chars */
-#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */
- /* flow control chars */
-
-#define DIGI_GETINFO (('e'<<8) | 103) /* Fill in digi_info */
-#define DIGI_POLLER (('e'<<8) | 104) /* Turn on/off poller */
-#define DIGI_INIT (('e'<<8) | 105) /* Allow things to run. */
-
-struct digiflow_struct
-{
- unsigned char startc; /* flow cntl start char */
- unsigned char stopc; /* flow cntl stop char */
-};
-
-typedef struct digiflow_struct digiflow_t;
-
-
-/************************************************************************
- * Values for digi_flags
- ************************************************************************/
-#define DIGI_IXON 0x0001 /* Handle IXON in the FEP */
-#define DIGI_FAST 0x0002 /* Fast baud rates */
-#define RTSPACE 0x0004 /* RTS input flow control */
-#define CTSPACE 0x0008 /* CTS output flow control */
-#define DSRPACE 0x0010 /* DSR output flow control */
-#define DCDPACE 0x0020 /* DCD output flow control */
-#define DTRPACE 0x0040 /* DTR input flow control */
-#define DIGI_FORCEDCD 0x0100 /* Force carrier */
-#define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */
-#define DIGI_AIXON 0x0400 /* Aux flow control in fep */
-
-
-/************************************************************************
- * Values for digiDload
- ************************************************************************/
-#define NORMAL 0
-#define PCI_CTL 1
-
-#define SIZE8 0
-#define SIZE16 1
-#define SIZE32 2
-
-/************************************************************************
- * Structure used with ioctl commands for DIGI parameters.
- ************************************************************************/
-struct digi_struct
-{
- unsigned short digi_flags; /* Flags (see above) */
-};
-
-typedef struct digi_struct digi_t;
-
-struct digi_info
-{
- unsigned long board; /* Which board is this ? */
- unsigned char status; /* Alive or dead */
- unsigned char type; /* see epca.h */
- unsigned char subtype; /* For future XEM, XR, etc ... */
- unsigned short numports; /* Number of ports configured */
- unsigned char *port; /* I/O Address */
- unsigned char *membase; /* DPR Address */
- unsigned char *version; /* For future ... */
- unsigned short windowData; /* For future ... */
-} ;
+++ /dev/null
-
-#define CSTART 0x400L
-#define CMAX 0x800L
-#define ISTART 0x800L
-#define IMAX 0xC00L
-#define CIN 0xD10L
-#define GLOBAL 0xD10L
-#define EIN 0xD18L
-#define FEPSTAT 0xD20L
-#define CHANSTRUCT 0x1000L
-#define RXTXBUF 0x4000L
-
-
-struct global_data
-{
- u16 cin;
- u16 cout;
- u16 cstart;
- u16 cmax;
- u16 ein;
- u16 eout;
- u16 istart;
- u16 imax;
-};
-
-
-struct board_chan
-{
- u32 filler1;
- u32 filler2;
- u16 tseg;
- u16 tin;
- u16 tout;
- u16 tmax;
-
- u16 rseg;
- u16 rin;
- u16 rout;
- u16 rmax;
-
- u16 tlow;
- u16 rlow;
- u16 rhigh;
- u16 incr;
-
- u16 etime;
- u16 edelay;
- unchar *dev;
-
- u16 iflag;
- u16 oflag;
- u16 cflag;
- u16 gmask;
-
- u16 col;
- u16 delay;
- u16 imask;
- u16 tflush;
-
- u32 filler3;
- u32 filler4;
- u32 filler5;
- u32 filler6;
-
- u8 num;
- u8 ract;
- u8 bstat;
- u8 tbusy;
- u8 iempty;
- u8 ilow;
- u8 idata;
- u8 eflag;
-
- u8 tflag;
- u8 rflag;
- u8 xmask;
- u8 xval;
- u8 mstat;
- u8 mchange;
- u8 mint;
- u8 lstat;
-
- u8 mtran;
- u8 orun;
- u8 startca;
- u8 stopca;
- u8 startc;
- u8 stopc;
- u8 vnext;
- u8 hflow;
-
- u8 fillc;
- u8 ochar;
- u8 omask;
-
- u8 filler7;
- u8 filler8[28];
-};
-
-
-#define SRXLWATER 0xE0
-#define SRXHWATER 0xE1
-#define STOUT 0xE2
-#define PAUSETX 0xE3
-#define RESUMETX 0xE4
-#define SAUXONOFFC 0xE6
-#define SENDBREAK 0xE8
-#define SETMODEM 0xE9
-#define SETIFLAGS 0xEA
-#define SONOFFC 0xEB
-#define STXLWATER 0xEC
-#define PAUSERX 0xEE
-#define RESUMERX 0xEF
-#define SETBUFFER 0xF2
-#define SETCOOKED 0xF3
-#define SETHFLOW 0xF4
-#define SETCTRLFLAGS 0xF5
-#define SETVNEXT 0xF6
-
-
-
-#define BREAK_IND 0x01
-#define LOWTX_IND 0x02
-#define EMPTYTX_IND 0x04
-#define DATA_IND 0x08
-#define MODEMCHG_IND 0x20
-
-#define FEP_HUPCL 0002000
-#if 0
-#define RTS 0x02
-#define CD 0x08
-#define DSR 0x10
-#define CTS 0x20
-#define RI 0x40
-#define DTR 0x80
-#endif
+++ /dev/null
-/*************************************************************************
- * Defines and structure definitions for PCI BIOS Interface
- *************************************************************************/
-#define PCIMAX 32 /* maximum number of PCI boards */
-
-
-#define PCI_VENDOR_DIGI 0x114F
-#define PCI_DEVICE_EPC 0x0002
-#define PCI_DEVICE_RIGHTSWITCH 0x0003 /* For testing */
-#define PCI_DEVICE_XEM 0x0004
-#define PCI_DEVICE_XR 0x0005
-#define PCI_DEVICE_CX 0x0006
-#define PCI_DEVICE_XRJ 0x0009 /* Jupiter boards with */
-#define PCI_DEVICE_EPCJ 0x000a /* PLX 9060 chip for PCI */
-
-
-/*
- * On the PCI boards, there is no IO space allocated
- * The I/O registers will be in the first 3 bytes of the
- * upper 2MB of the 4MB memory space. The board memory
- * will be mapped into the low 2MB of the 4MB memory space
- */
-
-/* Potential location of PCI Bios from E0000 to FFFFF*/
-#define PCI_BIOS_SIZE 0x00020000
-
-/* Size of Memory and I/O for PCI (4MB) */
-#define PCI_RAM_SIZE 0x00400000
-
-/* Size of Memory (2MB) */
-#define PCI_MEM_SIZE 0x00200000
-
-/* Offset of I/0 in Memory (2MB) */
-#define PCI_IO_OFFSET 0x00200000
-
-#define MEMOUTB(basemem, pnum, setmemval) *(caddr_t)((basemem) + ( PCI_IO_OFFSET | pnum << 4 | pnum )) = (setmemval)
-#define MEMINB(basemem, pnum) *(caddr_t)((basemem) + (PCI_IO_OFFSET | pnum << 4 | pnum )) /* for PCI I/O */
-
-
-
-
-
--- /dev/null
+/* Definitions for DigiBoard ditty(1) command. */
+
+#if !defined(TIOCMODG)
+#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */
+#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */
+#endif
+
+#if !defined(TIOCMSET)
+#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */
+#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */
+#endif
+
+#if !defined(TIOCMBIC)
+#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */
+#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */
+#endif
+
+#if !defined(TIOCSDTR)
+#define TIOCSDTR (('e'<<8) | 0) /* set DTR */
+#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */
+#endif
+
+/************************************************************************
+ * Ioctl command arguments for DIGI parameters.
+ ************************************************************************/
+#define DIGI_GETA (('e'<<8) | 94) /* Read params */
+
+#define DIGI_SETA (('e'<<8) | 95) /* Set params */
+#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */
+#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */
+
+#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */
+ /* control characters */
+#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */
+ /* control characters */
+#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */
+ /* flow control chars */
+#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */
+ /* flow control chars */
+
+#define DIGI_GETINFO (('e'<<8) | 103) /* Fill in digi_info */
+#define DIGI_POLLER (('e'<<8) | 104) /* Turn on/off poller */
+#define DIGI_INIT (('e'<<8) | 105) /* Allow things to run. */
+
+struct digiflow_struct
+{
+ unsigned char startc; /* flow cntl start char */
+ unsigned char stopc; /* flow cntl stop char */
+};
+
+typedef struct digiflow_struct digiflow_t;
+
+
+/************************************************************************
+ * Values for digi_flags
+ ************************************************************************/
+#define DIGI_IXON 0x0001 /* Handle IXON in the FEP */
+#define DIGI_FAST 0x0002 /* Fast baud rates */
+#define RTSPACE 0x0004 /* RTS input flow control */
+#define CTSPACE 0x0008 /* CTS output flow control */
+#define DSRPACE 0x0010 /* DSR output flow control */
+#define DCDPACE 0x0020 /* DCD output flow control */
+#define DTRPACE 0x0040 /* DTR input flow control */
+#define DIGI_FORCEDCD 0x0100 /* Force carrier */
+#define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */
+#define DIGI_AIXON 0x0400 /* Aux flow control in fep */
+
+
+/************************************************************************
+ * Values for digiDload
+ ************************************************************************/
+#define NORMAL 0
+#define PCI_CTL 1
+
+#define SIZE8 0
+#define SIZE16 1
+#define SIZE32 2
+
+/************************************************************************
+ * Structure used with ioctl commands for DIGI parameters.
+ ************************************************************************/
+struct digi_struct
+{
+ unsigned short digi_flags; /* Flags (see above) */
+};
+
+typedef struct digi_struct digi_t;
+
+struct digi_info
+{
+ unsigned long board; /* Which board is this ? */
+ unsigned char status; /* Alive or dead */
+ unsigned char type; /* see epca.h */
+ unsigned char subtype; /* For future XEM, XR, etc ... */
+ unsigned short numports; /* Number of ports configured */
+ unsigned char *port; /* I/O Address */
+ unsigned char *membase; /* DPR Address */
+ unsigned char *version; /* For future ... */
+ unsigned short windowData; /* For future ... */
+} ;
--- /dev/null
+
+#define CSTART 0x400L
+#define CMAX 0x800L
+#define ISTART 0x800L
+#define IMAX 0xC00L
+#define CIN 0xD10L
+#define GLOBAL 0xD10L
+#define EIN 0xD18L
+#define FEPSTAT 0xD20L
+#define CHANSTRUCT 0x1000L
+#define RXTXBUF 0x4000L
+
+
+struct global_data
+{
+ u16 cin;
+ u16 cout;
+ u16 cstart;
+ u16 cmax;
+ u16 ein;
+ u16 eout;
+ u16 istart;
+ u16 imax;
+};
+
+
+struct board_chan
+{
+ u32 filler1;
+ u32 filler2;
+ u16 tseg;
+ u16 tin;
+ u16 tout;
+ u16 tmax;
+
+ u16 rseg;
+ u16 rin;
+ u16 rout;
+ u16 rmax;
+
+ u16 tlow;
+ u16 rlow;
+ u16 rhigh;
+ u16 incr;
+
+ u16 etime;
+ u16 edelay;
+ unchar *dev;
+
+ u16 iflag;
+ u16 oflag;
+ u16 cflag;
+ u16 gmask;
+
+ u16 col;
+ u16 delay;
+ u16 imask;
+ u16 tflush;
+
+ u32 filler3;
+ u32 filler4;
+ u32 filler5;
+ u32 filler6;
+
+ u8 num;
+ u8 ract;
+ u8 bstat;
+ u8 tbusy;
+ u8 iempty;
+ u8 ilow;
+ u8 idata;
+ u8 eflag;
+
+ u8 tflag;
+ u8 rflag;
+ u8 xmask;
+ u8 xval;
+ u8 mstat;
+ u8 mchange;
+ u8 mint;
+ u8 lstat;
+
+ u8 mtran;
+ u8 orun;
+ u8 startca;
+ u8 stopca;
+ u8 startc;
+ u8 stopc;
+ u8 vnext;
+ u8 hflow;
+
+ u8 fillc;
+ u8 ochar;
+ u8 omask;
+
+ u8 filler7;
+ u8 filler8[28];
+};
+
+
+#define SRXLWATER 0xE0
+#define SRXHWATER 0xE1
+#define STOUT 0xE2
+#define PAUSETX 0xE3
+#define RESUMETX 0xE4
+#define SAUXONOFFC 0xE6
+#define SENDBREAK 0xE8
+#define SETMODEM 0xE9
+#define SETIFLAGS 0xEA
+#define SONOFFC 0xEB
+#define STXLWATER 0xEC
+#define PAUSERX 0xEE
+#define RESUMERX 0xEF
+#define SETBUFFER 0xF2
+#define SETCOOKED 0xF3
+#define SETHFLOW 0xF4
+#define SETCTRLFLAGS 0xF5
+#define SETVNEXT 0xF6
+
+
+
+#define BREAK_IND 0x01
+#define LOWTX_IND 0x02
+#define EMPTYTX_IND 0x04
+#define DATA_IND 0x08
+#define MODEMCHG_IND 0x20
+
+#define FEP_HUPCL 0002000
+#if 0
+#define RTS 0x02
+#define CD 0x08
+#define DSR 0x10
+#define CTS 0x20
+#define RI 0x40
+#define DTR 0x80
+#endif
--- /dev/null
+/*************************************************************************
+ * Defines and structure definitions for PCI BIOS Interface
+ *************************************************************************/
+#define PCIMAX 32 /* maximum number of PCI boards */
+
+
+#define PCI_VENDOR_DIGI 0x114F
+#define PCI_DEVICE_EPC 0x0002
+#define PCI_DEVICE_RIGHTSWITCH 0x0003 /* For testing */
+#define PCI_DEVICE_XEM 0x0004
+#define PCI_DEVICE_XR 0x0005
+#define PCI_DEVICE_CX 0x0006
+#define PCI_DEVICE_XRJ 0x0009 /* Jupiter boards with */
+#define PCI_DEVICE_EPCJ 0x000a /* PLX 9060 chip for PCI */
+
+
+/*
+ * On the PCI boards, there is no IO space allocated
+ * The I/O registers will be in the first 3 bytes of the
+ * upper 2MB of the 4MB memory space. The board memory
+ * will be mapped into the low 2MB of the 4MB memory space
+ */
+
+/* Potential location of PCI Bios from E0000 to FFFFF*/
+#define PCI_BIOS_SIZE 0x00020000
+
+/* Size of Memory and I/O for PCI (4MB) */
+#define PCI_RAM_SIZE 0x00400000
+
+/* Size of Memory (2MB) */
+#define PCI_MEM_SIZE 0x00200000
+
+/* Offset of I/0 in Memory (2MB) */
+#define PCI_IO_OFFSET 0x00200000
+
+#define MEMOUTB(basemem, pnum, setmemval) *(caddr_t)((basemem) + ( PCI_IO_OFFSET | pnum << 4 | pnum )) = (setmemval)
+#define MEMINB(basemem, pnum) *(caddr_t)((basemem) + (PCI_IO_OFFSET | pnum << 4 | pnum )) /* for PCI I/O */
+
+
+
+
+
projects / firefly-linux-kernel-4.4.55.git / commitdiff