[PATCH] USB: UHCI: don't track suspended ports
authorAlan Stern <stern@rowland.harvard.edu>
Tue, 4 Apr 2006 18:47:44 +0000 (14:47 -0400)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 14 Apr 2006 18:12:26 +0000 (11:12 -0700)
Someone recently posted a bug report where it turned out that uhci-hcd
was disagreeing with the UHCI controller over whether or not a port was
suspended: The driver thought it wasn't and the hardware thought it was.
This patch (as665) fixes the problem and simplifies the driver by
removing the internal state-tracking completely.  Now the driver just
asks the hardware whether a port is suspended.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/uhci-hcd.c
drivers/usb/host/uhci-hcd.h
drivers/usb/host/uhci-hub.c

index 3d511690c9b7d5fd70d73e3c1cbf20a75f55e865..c0c4db78b590de386af45318b82e23fde5567457 100644 (file)
@@ -115,8 +115,7 @@ static void finish_reset(struct uhci_hcd *uhci)
        for (port = 0; port < uhci->rh_numports; ++port)
                outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
 
-       uhci->port_c_suspend = uhci->suspended_ports =
-                       uhci->resuming_ports = 0;
+       uhci->port_c_suspend = uhci->resuming_ports = 0;
        uhci->rh_state = UHCI_RH_RESET;
        uhci->is_stopped = UHCI_IS_STOPPED;
        uhci_to_hcd(uhci)->state = HC_STATE_HALT;
index 4a69c7eb09bd015c8ae0726f24b64a7de54d5dbf..d5c8f4d928236ba58ef62bd448c506c078f7f9e4 100644 (file)
@@ -415,7 +415,6 @@ struct uhci_hcd {
 
        /* Support for port suspend/resume/reset */
        unsigned long port_c_suspend;           /* Bit-arrays of ports */
-       unsigned long suspended_ports;
        unsigned long resuming_ports;
        unsigned long ports_timeout;            /* Time to stop signalling */
 
index 152971d167695580bc69282091888cc1b962ea90..c8451d9578f16ebd96df6501f058efbca031f24a 100644 (file)
@@ -85,11 +85,10 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
 {
        int status;
 
-       if (test_bit(port, &uhci->suspended_ports)) {
+       if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
                CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
-               clear_bit(port, &uhci->suspended_ports);
-               clear_bit(port, &uhci->resuming_ports);
-               set_bit(port, &uhci->port_c_suspend);
+               if (test_bit(port, &uhci->resuming_ports))
+                       set_bit(port, &uhci->port_c_suspend);
 
                /* The controller won't actually turn off the RD bit until
                 * it has had a chance to send a low-speed EOP sequence,
@@ -97,6 +96,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
                 * slightly longer for good luck. */
                udelay(4);
        }
+       clear_bit(port, &uhci->resuming_ports);
 }
 
 /* Wait for the UHCI controller in HP's iLO2 server management chip.
@@ -265,8 +265,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                        wPortChange |= USB_PORT_STAT_C_SUSPEND;
                        lstatus |= 1;
                }
-               if (test_bit(port, &uhci->suspended_ports))
-                       lstatus |= 2;
                if (test_bit(port, &uhci->resuming_ports))
                        lstatus |= 4;
 
@@ -309,7 +307,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
                switch (wValue) {
                case USB_PORT_FEAT_SUSPEND:
-                       set_bit(port, &uhci->suspended_ports);
                        SET_RH_PORTSTAT(USBPORTSC_SUSP);
                        OK(0);
                case USB_PORT_FEAT_RESET:
@@ -343,8 +340,11 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                        CLR_RH_PORTSTAT(USBPORTSC_PEC);
                        OK(0);
                case USB_PORT_FEAT_SUSPEND:
-                       if (test_bit(port, &uhci->suspended_ports) &&
-                                       !test_and_set_bit(port,
+                       if (!(inw(port_addr) & USBPORTSC_SUSP)) {
+
+                               /* Make certain the port isn't suspended */
+                               uhci_finish_suspend(uhci, port, port_addr);
+                       } else if (!test_and_set_bit(port,
                                                &uhci->resuming_ports)) {
                                SET_RH_PORTSTAT(USBPORTSC_RD);