i2c: designware: add support of I2C standard mode

Some legacy devices support ony I2C standard mode at 100kHz.
This patch allows to select the standard mode through the DTS
with the use of the existing clock-frequency parameter.

When clock-frequency parameter is not set, the fast mode is selected.
Only when the parameter is set at 100000, the standard mode is selected.

Signed-off-by: Romain Baeriswyl <romainba@abilis.com>
Reviewed-by: Christian Ruppert <christian.ruppert@abilis.com>
Acked-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index bc877333315586cc2a3051a8678c6fe7e7f41b68..8193e8eea7641b8dcc6df15e5fdacd60ec502119 100644 (file)
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -123,6 +123,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
        struct i2c_adapter *adap;
        struct resource *mem;
        int irq, r;
+       u32 clk_freq;
 
        irq = platform_get_irq(pdev, 0);
        if (irq < 0) {
@@ -152,6 +153,9 @@ static int dw_i2c_probe(struct platform_device *pdev)
                return PTR_ERR(dev->clk);
        clk_prepare_enable(dev->clk);
 
+       /* fast mode by default because of legacy reasons */
+       clk_freq = 400000;
+
        if (pdev->dev.of_node) {
                u32 ht = 0;
                u32 ic_clk = dev->get_clk_rate_khz(dev);
@@ -167,6 +171,17 @@ static int dw_i2c_probe(struct platform_device *pdev)
                of_property_read_u32(pdev->dev.of_node,
                                     "i2c-scl-falling-time-ns",
                                     &dev->scl_falling_time);
+
+               of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+                                    &clk_freq);
+
+               /* Only standard mode at 100kHz and fast mode at 400kHz
+                * are supported.
+                */
+               if (clk_freq != 100000 && clk_freq != 400000) {
+                       dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
+                       return -EINVAL;
+               }
        }
 
        dev->functionality =
@@ -176,8 +191,12 @@ static int dw_i2c_probe(struct platform_device *pdev)
                I2C_FUNC_SMBUS_BYTE_DATA |
                I2C_FUNC_SMBUS_WORD_DATA |
                I2C_FUNC_SMBUS_I2C_BLOCK;
-       dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-               DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+       if (clk_freq == 100000)
+               dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+                       DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD;
+       else
+               dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+                       DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
 
        /* Try first if we can configure the device from ACPI */
        r = dw_i2c_acpi_configure(pdev);