drm/i915: Drop non-HAS_PCH_SPLIT() code from ironlake_crtc_mode_set().
authorEric Anholt <eric@anholt.net>
Wed, 30 Mar 2011 20:01:07 +0000 (13:01 -0700)
committerKeith Packard <keithp@keithp.com>
Tue, 10 May 2011 20:56:37 +0000 (13:56 -0700)
Ironlake is where the PCH split started.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
drivers/gpu/drm/i915/intel_display.c

index a0d5a1a039e0f31588b9d691d9352d7e2eaee58b..b41c87ac561f47c8517a1c8c9b4d251517a40380 100644 (file)
@@ -4934,7 +4934,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        struct fdi_m_n m_n = {0};
        u32 reg, temp;
        u32 lvds_sync = 0;
-       int target_clock;
+       int target_clock, pixel_multiplier, lane, link_bw, bpp, factor;
 
        list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
                if (encoder->base.crtc != crtc)
@@ -4976,8 +4976,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                              refclk / 1000);
        } else if (!IS_GEN2(dev)) {
                refclk = 96000;
-               if (HAS_PCH_SPLIT(dev) &&
-                   (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)))
+               if (!has_edp_encoder ||
+                   intel_encoder_is_pch_edp(&has_edp_encoder->base))
                        refclk = 120000; /* 120Mhz refclk */
        } else {
                refclk = 48000;
@@ -5036,140 +5036,137 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        }
 
        /* FDI link */
-       if (HAS_PCH_SPLIT(dev)) {
-               int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
-               int lane = 0, link_bw, bpp;
-               /* CPU eDP doesn't require FDI link, so just set DP M/N
-                  according to current link config */
-               if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+       pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+       lane = 0;
+       /* CPU eDP doesn't require FDI link, so just set DP M/N
+          according to current link config */
+       if (has_edp_encoder &&
+           !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+               target_clock = mode->clock;
+               intel_edp_link_config(has_edp_encoder,
+                                     &lane, &link_bw);
+       } else {
+               /* [e]DP over FDI requires target mode clock
+                  instead of link clock */
+               if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
                        target_clock = mode->clock;
-                       intel_edp_link_config(has_edp_encoder,
-                                             &lane, &link_bw);
-               } else {
-                       /* [e]DP over FDI requires target mode clock
-                          instead of link clock */
-                       if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
-                               target_clock = mode->clock;
-                       else
-                               target_clock = adjusted_mode->clock;
-
-                       /* FDI is a binary signal running at ~2.7GHz, encoding
-                        * each output octet as 10 bits. The actual frequency
-                        * is stored as a divider into a 100MHz clock, and the
-                        * mode pixel clock is stored in units of 1KHz.
-                        * Hence the bw of each lane in terms of the mode signal
-                        * is:
-                        */
-                       link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
-               }
+               else
+                       target_clock = adjusted_mode->clock;
+
+               /* FDI is a binary signal running at ~2.7GHz, encoding
+                * each output octet as 10 bits. The actual frequency
+                * is stored as a divider into a 100MHz clock, and the
+                * mode pixel clock is stored in units of 1KHz.
+                * Hence the bw of each lane in terms of the mode signal
+                * is:
+                */
+               link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+       }
 
-               /* determine panel color depth */
-               temp = I915_READ(PIPECONF(pipe));
-               temp &= ~PIPE_BPC_MASK;
-               if (is_lvds) {
-                       /* the BPC will be 6 if it is 18-bit LVDS panel */
-                       if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
-                               temp |= PIPE_8BPC;
-                       else
-                               temp |= PIPE_6BPC;
-               } else if (has_edp_encoder) {
-                       switch (dev_priv->edp.bpp/3) {
-                       case 8:
-                               temp |= PIPE_8BPC;
-                               break;
-                       case 10:
-                               temp |= PIPE_10BPC;
-                               break;
-                       case 6:
-                               temp |= PIPE_6BPC;
-                               break;
-                       case 12:
-                               temp |= PIPE_12BPC;
-                               break;
-                       }
-               } else
+       /* determine panel color depth */
+       temp = I915_READ(PIPECONF(pipe));
+       temp &= ~PIPE_BPC_MASK;
+       if (is_lvds) {
+               /* the BPC will be 6 if it is 18-bit LVDS panel */
+               if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+                       temp |= PIPE_8BPC;
+               else
+                       temp |= PIPE_6BPC;
+       } else if (has_edp_encoder) {
+               switch (dev_priv->edp.bpp/3) {
+               case 8:
                        temp |= PIPE_8BPC;
-               I915_WRITE(PIPECONF(pipe), temp);
-
-               switch (temp & PIPE_BPC_MASK) {
-               case PIPE_8BPC:
-                       bpp = 24;
                        break;
-               case PIPE_10BPC:
-                       bpp = 30;
+               case 10:
+                       temp |= PIPE_10BPC;
                        break;
-               case PIPE_6BPC:
-                       bpp = 18;
+               case 6:
+                       temp |= PIPE_6BPC;
                        break;
-               case PIPE_12BPC:
-                       bpp = 36;
+               case 12:
+                       temp |= PIPE_12BPC;
                        break;
-               default:
-                       DRM_ERROR("unknown pipe bpc value\n");
-                       bpp = 24;
-               }
-
-               if (!lane) {
-                       /* 
-                        * Account for spread spectrum to avoid
-                        * oversubscribing the link. Max center spread
-                        * is 2.5%; use 5% for safety's sake.
-                        */
-                       u32 bps = target_clock * bpp * 21 / 20;
-                       lane = bps / (link_bw * 8) + 1;
                }
+       } else
+               temp |= PIPE_8BPC;
+       I915_WRITE(PIPECONF(pipe), temp);
 
-               intel_crtc->fdi_lanes = lane;
+       switch (temp & PIPE_BPC_MASK) {
+       case PIPE_8BPC:
+               bpp = 24;
+               break;
+       case PIPE_10BPC:
+               bpp = 30;
+               break;
+       case PIPE_6BPC:
+               bpp = 18;
+               break;
+       case PIPE_12BPC:
+               bpp = 36;
+               break;
+       default:
+               DRM_ERROR("unknown pipe bpc value\n");
+               bpp = 24;
+       }
 
-               if (pixel_multiplier > 1)
-                       link_bw *= pixel_multiplier;
-               ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+       if (!lane) {
+               /*
+                * Account for spread spectrum to avoid
+                * oversubscribing the link. Max center spread
+                * is 2.5%; use 5% for safety's sake.
+                */
+               u32 bps = target_clock * bpp * 21 / 20;
+               lane = bps / (link_bw * 8) + 1;
        }
 
+       intel_crtc->fdi_lanes = lane;
+
+       if (pixel_multiplier > 1)
+               link_bw *= pixel_multiplier;
+       ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+
        /* Ironlake: try to setup display ref clock before DPLL
         * enabling. This is only under driver's control after
         * PCH B stepping, previous chipset stepping should be
         * ignoring this setting.
         */
-       if (HAS_PCH_SPLIT(dev)) {
-               temp = I915_READ(PCH_DREF_CONTROL);
-               /* Always enable nonspread source */
-               temp &= ~DREF_NONSPREAD_SOURCE_MASK;
-               temp |= DREF_NONSPREAD_SOURCE_ENABLE;
-               temp &= ~DREF_SSC_SOURCE_MASK;
-               temp |= DREF_SSC_SOURCE_ENABLE;
-               I915_WRITE(PCH_DREF_CONTROL, temp);
-
-               POSTING_READ(PCH_DREF_CONTROL);
-               udelay(200);
-
-               if (has_edp_encoder) {
-                       if (intel_panel_use_ssc(dev_priv)) {
-                               temp |= DREF_SSC1_ENABLE;
-                               I915_WRITE(PCH_DREF_CONTROL, temp);
-
-                               POSTING_READ(PCH_DREF_CONTROL);
-                               udelay(200);
-                       }
-                       temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+       temp = I915_READ(PCH_DREF_CONTROL);
+       /* Always enable nonspread source */
+       temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+       temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+       temp &= ~DREF_SSC_SOURCE_MASK;
+       temp |= DREF_SSC_SOURCE_ENABLE;
+       I915_WRITE(PCH_DREF_CONTROL, temp);
+
+       POSTING_READ(PCH_DREF_CONTROL);
+       udelay(200);
 
-                       /* Enable CPU source on CPU attached eDP */
-                       if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-                               if (intel_panel_use_ssc(dev_priv))
-                                       temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
-                               else
-                                       temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
-                       } else {
-                               /* Enable SSC on PCH eDP if needed */
-                               if (intel_panel_use_ssc(dev_priv)) {
-                                       DRM_ERROR("enabling SSC on PCH\n");
-                                       temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
-                               }
-                       }
+       if (has_edp_encoder) {
+               if (intel_panel_use_ssc(dev_priv)) {
+                       temp |= DREF_SSC1_ENABLE;
                        I915_WRITE(PCH_DREF_CONTROL, temp);
+
                        POSTING_READ(PCH_DREF_CONTROL);
                        udelay(200);
                }
+               temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+               /* Enable CPU source on CPU attached eDP */
+               if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+                       if (intel_panel_use_ssc(dev_priv))
+                               temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+                       else
+                               temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+               } else {
+                       /* Enable SSC on PCH eDP if needed */
+                       if (intel_panel_use_ssc(dev_priv)) {
+                               DRM_ERROR("enabling SSC on PCH\n");
+                               temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+                       }
+               }
+               I915_WRITE(PCH_DREF_CONTROL, temp);
+               POSTING_READ(PCH_DREF_CONTROL);
+               udelay(200);
        }
 
        if (IS_PINEVIEW(dev)) {
@@ -5185,24 +5182,19 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        }
 
        /* Enable autotuning of the PLL clock (if permissible) */
-       if (HAS_PCH_SPLIT(dev)) {
-               int factor = 21;
-
-               if (is_lvds) {
-                       if ((intel_panel_use_ssc(dev_priv) &&
-                            dev_priv->lvds_ssc_freq == 100) ||
-                           (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
-                               factor = 25;
-               } else if (is_sdvo && is_tv)
-                       factor = 20;
+       factor = 21;
+       if (is_lvds) {
+               if ((intel_panel_use_ssc(dev_priv) &&
+                    dev_priv->lvds_ssc_freq == 100) ||
+                   (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+                       factor = 25;
+       } else if (is_sdvo && is_tv)
+               factor = 20;
 
-               if (clock.m1 < factor * clock.n)
-                       fp |= FP_CB_TUNE;
-       }
+       if (clock.m1 < factor * clock.n)
+               fp |= FP_CB_TUNE;
 
        dpll = 0;
-       if (!HAS_PCH_SPLIT(dev))
-               dpll = DPLL_VGA_MODE_DIS;
 
        if (!IS_GEN2(dev)) {
                if (is_lvds)
@@ -5214,7 +5206,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                        if (pixel_multiplier > 1) {
                                if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
                                        dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
-                               else if (HAS_PCH_SPLIT(dev))
+                               else
                                        dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
                        }
                        dpll |= DPLL_DVO_HIGH_SPEED;
@@ -5228,8 +5220,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                else {
                        dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
                        /* also FPA1 */
-                       if (HAS_PCH_SPLIT(dev))
-                               dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+                       dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
                        if (IS_G4X(dev) && has_reduced_clock)
                                dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
                }
@@ -5247,8 +5238,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                        dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
                        break;
                }
-               if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
-                       dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
        } else {
                if (is_lvds) {
                        dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
@@ -5279,15 +5268,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        /* Set up the display plane register */
        dspcntr = DISPPLANE_GAMMA_ENABLE;
 
-       /* Ironlake's plane is forced to pipe, bit 24 is to
-          enable color space conversion */
-       if (!HAS_PCH_SPLIT(dev)) {
-               if (pipe == 0)
-                       dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
-               else
-                       dspcntr |= DISPPLANE_SEL_PIPE_B;
-       }
-
        if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
                /* Enable pixel doubling when the dot clock is > 90% of the (display)
                 * core speed.
@@ -5302,20 +5282,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                        pipeconf &= ~PIPECONF_DOUBLE_WIDE;
        }
 
-       if (!HAS_PCH_SPLIT(dev))
-               dpll |= DPLL_VCO_ENABLE;
-
        DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
        drm_mode_debug_printmodeline(mode);
 
        /* assign to Ironlake registers */
-       if (HAS_PCH_SPLIT(dev)) {
-               fp_reg = PCH_FP0(pipe);
-               dpll_reg = PCH_DPLL(pipe);
-       } else {
-               fp_reg = FP0(pipe);
-               dpll_reg = DPLL(pipe);
-       }
+       fp_reg = PCH_FP0(pipe);
+       dpll_reg = PCH_DPLL(pipe);
 
        /* PCH eDP needs FDI, but CPU eDP does not */
        if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
@@ -5354,9 +5326,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
         * things on.
         */
        if (is_lvds) {
-               reg = LVDS;
-               if (HAS_PCH_SPLIT(dev))
-                       reg = PCH_LVDS;
+               reg = PCH_LVDS;
 
                temp = I915_READ(reg);
                temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
@@ -5385,13 +5355,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                 * appropriately here, but we need to look more thoroughly into how
                 * panels behave in the two modes.
                 */
-               /* set the dithering flag on non-PCH LVDS as needed */
-               if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
-                       if (dev_priv->lvds_dither)
-                               temp |= LVDS_ENABLE_DITHER;
-                       else
-                               temp &= ~LVDS_ENABLE_DITHER;
-               }
                if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
                        lvds_sync |= LVDS_HSYNC_POLARITY;
                if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -5412,18 +5375,16 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
        }
 
        /* set the dithering flag and clear for anything other than a panel. */
-       if (HAS_PCH_SPLIT(dev)) {
-               pipeconf &= ~PIPECONF_DITHER_EN;
-               pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
-               if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
-                       pipeconf |= PIPECONF_DITHER_EN;
-                       pipeconf |= PIPECONF_DITHER_TYPE_ST1;
-               }
+       pipeconf &= ~PIPECONF_DITHER_EN;
+       pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+       if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
+               pipeconf |= PIPECONF_DITHER_EN;
+               pipeconf |= PIPECONF_DITHER_TYPE_ST1;
        }
 
        if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
                intel_dp_set_m_n(crtc, mode, adjusted_mode);
-       } else if (HAS_PCH_SPLIT(dev)) {
+       } else {
                /* For non-DP output, clear any trans DP clock recovery setting.*/
                I915_WRITE(TRANSDATA_M1(pipe), 0);
                I915_WRITE(TRANSDATA_N1(pipe), 0);
@@ -5431,31 +5392,20 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                I915_WRITE(TRANSDPLINK_N1(pipe), 0);
        }
 
-       if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+       if (!has_edp_encoder ||
+           intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
                I915_WRITE(dpll_reg, dpll);
 
                /* Wait for the clocks to stabilize. */
                POSTING_READ(dpll_reg);
                udelay(150);
 
-               if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
-                       temp = 0;
-                       if (is_sdvo) {
-                               temp = intel_mode_get_pixel_multiplier(adjusted_mode);
-                               if (temp > 1)
-                                       temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-                               else
-                                       temp = 0;
-                       }
-                       I915_WRITE(DPLL_MD(pipe), temp);
-               } else {
-                       /* The pixel multiplier can only be updated once the
-                        * DPLL is enabled and the clocks are stable.
-                        *
-                        * So write it again.
-                        */
-                       I915_WRITE(dpll_reg, dpll);
-               }
+               /* The pixel multiplier can only be updated once the
+                * DPLL is enabled and the clocks are stable.
+                *
+                * So write it again.
+                */
+               I915_WRITE(dpll_reg, dpll);
        }
 
        intel_crtc->lowfreq_avail = false;
@@ -5506,33 +5456,24 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
                   (adjusted_mode->crtc_vsync_start - 1) |
                   ((adjusted_mode->crtc_vsync_end - 1) << 16));
 
-       /* pipesrc and dspsize control the size that is scaled from,
-        * which should always be the user's requested size.
+       /* pipesrc controls the size that is scaled from, which should
+        * always be the user's requested size.
         */
-       if (!HAS_PCH_SPLIT(dev)) {
-               I915_WRITE(DSPSIZE(plane),
-                          ((mode->vdisplay - 1) << 16) |
-                          (mode->hdisplay - 1));
-               I915_WRITE(DSPPOS(plane), 0);
-       }
        I915_WRITE(PIPESRC(pipe),
                   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
 
-       if (HAS_PCH_SPLIT(dev)) {
-               I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
-               I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
-               I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
-               I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+       I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+       I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+       I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+       I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
 
-               if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
-                       ironlake_set_pll_edp(crtc, adjusted_mode->clock);
-               }
+       if (has_edp_encoder &&
+           !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+               ironlake_set_pll_edp(crtc, adjusted_mode->clock);
        }
 
        I915_WRITE(PIPECONF(pipe), pipeconf);
        POSTING_READ(PIPECONF(pipe));
-       if (!HAS_PCH_SPLIT(dev))
-               intel_enable_pipe(dev_priv, pipe, false);
 
        intel_wait_for_vblank(dev, pipe);