ARM: mxs: Update DENX M28 machine and dts file
authorMarek Vasut <marex@denx.de>
Sun, 26 Aug 2012 12:59:31 +0000 (14:59 +0200)
committerShawn Guo <shawn.guo@linaro.org>
Mon, 27 Aug 2012 20:45:11 +0000 (04:45 +0800)
Update the mach-mxs machine by removing the enet_clkout(). The new
revision of the board doesn't need that. Also, update the DTS file
with all the new drivers pulled in the mainline recently, that is,
SPI, LRADC, USB.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
arch/arm/boot/dts/imx28-m28evk.dts
arch/arm/mach-mxs/mach-mxs.c

index ac3eff96a70c6ae61280a0666cedff6a22dd04d8..8118b64362b63150dcc520ef3dcd1096700c1f9f 100644 (file)
@@ -23,6 +23,8 @@
        apb@80000000 {
                apbh@80000000 {
                        gpmi-nand@8000c000 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
                                status = "okay";
                                             &mmc0_sck_cfg>;
                                bus-width = <8>;
                                wp-gpios = <&gpio3 10 1>;
+                               vmmc-supply = <&reg_vddio_sd0>;
                                status = "okay";
                        };
 
+                       ssp2: ssp@80014000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,imx28-spi";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&spi2_pins_a>;
+                               status = "okay";
+
+                               flash: m25p80@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+                                       compatible = "m25p80";
+                                       spi-max-frequency = <40000000>;
+                                       reg = <0>;
+                               };
+                       };
+
                        pinctrl@80018000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&hog_pins_a>;
                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
+                                               0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
                                                0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
                                                0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+                                               0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */
+                                               0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
                        i2c0: i2c@80058000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&i2c0_pins_a>;
+                               clock-frequency = <400000>;
                                status = "okay";
 
                                sgtl5000: codec@0a {
                                };
                        };
 
+                       lradc@80050000 {
+                               status = "okay";
+                       };
+
                        duart: serial@80074000 {
                                pinctrl-names = "default";
                                pinctrl-0 = <&duart_pins_a>;
                                status = "okay";
                        };
 
-                       auart0: serial@8006a000 {
-                               pinctrl-names = "default";
-                               pinctrl-0 = <&auart0_2pins_a>;
+                       usbphy0: usbphy@8007c000 {
                                status = "okay";
                        };
 
-                       auart3: serial@80070000 {
+                       usbphy1: usbphy@8007e000 {
+                               status = "okay";
+                       };
+
+                       auart0: serial@8006a000 {
                                pinctrl-names = "default";
-                               pinctrl-0 = <&auart3_pins_a>;
+                               pinctrl-0 = <&auart0_2pins_a>;
                                status = "okay";
                        };
                };
        };
 
        ahb@80080000 {
+               usb0: usb@80080000 {
+                       vbus-supply = <&reg_usb0_vbus>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&usbphy0_pins_a>;
+                       status = "okay";
+               };
+
+               usb1: usb@80090000 {
+                       vbus-supply = <&reg_usb1_vbus>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&usbphy1_pins_a>;
+                       status = "okay";
+               };
+
                mac0: ethernet@800f0000 {
                        phy-mode = "rmii";
                        pinctrl-names = "default";
                        pinctrl-0 = <&mac0_pins_a>;
-                       phy-reset-gpios = <&gpio3 11 0>;
                        status = "okay";
                };
 
                        regulator-max-microvolt = <3300000>;
                        regulator-always-on;
                };
+
+               reg_vddio_sd0: vddio-sd0 {
+                       compatible = "regulator-fixed";
+                       regulator-name = "vddio-sd0";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       gpio = <&gpio3 28 0>;
+               };
+
+               reg_usb0_vbus: usb0_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb0_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio3 12 0>;
+               };
+
+               reg_usb1_vbus: usb1_vbus {
+                       compatible = "regulator-fixed";
+                       regulator-name = "usb1_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio3 13 0>;
+               };
        };
 
        sound {
index 3b0d9c64c23574b9640340228ea73f6c7362a402..5cbb6376c685d128de8043c600775704aa1d9736 100644 (file)
@@ -288,7 +288,6 @@ static void __init imx28_evk_post_init(void)
 
 static void __init m28evk_init(void)
 {
-       enable_clk_enet_out();
        update_fec_mac_prop(OUI_DENX);
 
        mxsfb_pdata.mode_list = m28evk_video_modes;