clk: emev2: Add support for emev2 SMU clocks with DT
authorTakashi Yoshii <takasi-y@ops.dti.ne.jp>
Tue, 8 Oct 2013 05:32:17 +0000 (14:32 +0900)
committerSimon Horman <horms+renesas@verge.net.au>
Sat, 14 Dec 2013 04:17:55 +0000 (13:17 +0900)
Device tree clock binding document for EMMA Mobile EV2 SMU,
And Common clock framework based implementation of it.
Following nodes are defined to describe clock tree.
- renesas,emev2-smu
- renesas,emev2-smu-clkdiv
- renesas,emev2-smu-gclk

These bindings are designed manually based on
 19UH0037EJ1000_SMU : System Management Unit User's Manual

So far, reparent is not implemented, and is fixed to index #0.
Clock tree description is not included, and should be provided
by device-tree.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Documentation/devicetree/bindings/clock/emev2-clock.txt [new file with mode: 0644]
drivers/clk/shmobile/Makefile
drivers/clk/shmobile/clk-emev2.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt
new file mode 100644 (file)
index 0000000..60bbb1a
--- /dev/null
@@ -0,0 +1,98 @@
+Device tree Clock bindings for Renesas EMMA Mobile EV2
+
+This binding uses the common clock binding.
+
+* SMU
+System Management Unit described in user's manual R19UH0037EJ1000_SMU.
+This is not a clock provider, but clocks under SMU depend on it.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu"
+- reg: Address and Size of SMU registers
+
+* SMU_CLKDIV
+Function block with an input mux and a divider, which corresponds to
+"Serial clock generator" in fig."Clock System Overview" of the manual,
+and "xxx frequency division setting register" (XXXCLKDIV) registers.
+This makes internal (neither input nor output) clock that is provided
+to input of xxxGCLK block.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-clkdiv"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+* SMU_GCLK
+Clock gating node shown as "Clock stop processing block" in the
+fig."Clock System Overview" of the manual.
+Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-gclk"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Input clock as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+Example of provider:
+
+usia_u0_sclkdiv: usia_u0_sclkdiv {
+       compatible = "renesas,emev2-smu-clkdiv";
+       reg = <0x610 0>;
+       clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
+       #clock-cells = <0>;
+};
+
+usia_u0_sclk: usia_u0_sclk {
+       compatible = "renesas,emev2-smu-gclk";
+       reg = <0x4a0 1>;
+       clocks = <&usia_u0_sclkdiv>;
+       #clock-cells = <0>;
+};
+
+Example of consumer:
+
+uart@e1020000 {
+       compatible = "renesas,em-uart";
+       reg = <0xe1020000 0x38>;
+       interrupts = <0 8 0>;
+       clocks = <&usia_u0_sclk>;
+       clock-names = "sclk";
+};
+
+Example of clock-tree description:
+
+ This describes a clock path in the clock tree
+  c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+
+smu@e0110000 {
+       compatible = "renesas,emev2-smu";
+       reg = <0xe0110000 0x10000>;
+       #address-cells = <2>;
+       #size-cells = <0>;
+
+       c32ki: c32ki {
+               compatible = "fixed-clock";
+               clock-frequency = <32768>;
+               #clock-cells = <0>;
+       };
+       pll3_fo: pll3_fo {
+               compatible = "fixed-factor-clock";
+               clocks = <&c32ki>;
+               clock-div = <1>;
+               clock-mult = <7000>;
+               #clock-cells = <0>;
+       };
+       usia_u0_sclkdiv: usia_u0_sclkdiv {
+               compatible = "renesas,emev2-smu-clkdiv";
+               reg = <0x610 0>;
+               clocks = <&pll3_fo>;
+               #clock-cells = <0>;
+       };
+       usia_u0_sclk: usia_u0_sclk {
+               compatible = "renesas,emev2-smu-gclk";
+               reg = <0x4a0 1>;
+               clocks = <&usia_u0_sclkdiv>;
+               #clock-cells = <0>;
+       };
+};
index 706adc6ae70cfd35bfbef5075beb9dc925a94e99..9ecef140dba7a663b0a86c3338ea61d5ba21a39f 100644 (file)
@@ -1,7 +1,7 @@
+obj-$(CONFIG_ARCH_EMEV2)               += clk-emev2.o
 obj-$(CONFIG_ARCH_R8A7790)             += clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)             += clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)      += clk-div6.o
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)      += clk-mstp.o
-
 # for emply built-in.o
 obj-n  := dummy
diff --git a/drivers/clk/shmobile/clk-emev2.c b/drivers/clk/shmobile/clk-emev2.c
new file mode 100644 (file)
index 0000000..6c7c929
--- /dev/null
@@ -0,0 +1,104 @@
+/*
+ * EMMA Mobile EV2 common clock framework support
+ *
+ * Copyright (C) 2013 Takashi Yoshii <takashi.yoshii.ze@renesas.com>
+ * Copyright (C) 2012 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/* EMEV2 SMU registers */
+#define USIAU0_RSTCTRL 0x094
+#define USIBU1_RSTCTRL 0x0ac
+#define USIBU2_RSTCTRL 0x0b0
+#define USIBU3_RSTCTRL 0x0b4
+#define STI_RSTCTRL 0x124
+#define STI_CLKSEL 0x688
+
+static DEFINE_SPINLOCK(lock);
+
+/* not pretty, but hey */
+void __iomem *smu_base;
+
+static void __init emev2_smu_write(unsigned long value, int offs)
+{
+       BUG_ON(!smu_base || (offs >= PAGE_SIZE));
+       writel_relaxed(value, smu_base + offs);
+}
+
+static const struct of_device_id smu_id[] __initconst = {
+       { .compatible = "renesas,emev2-smu", },
+       {},
+};
+
+static void __init emev2_smu_init(void)
+{
+       struct device_node *np;
+
+       np = of_find_matching_node(NULL, smu_id);
+       BUG_ON(!np);
+       smu_base = of_iomap(np, 0);
+       BUG_ON(!smu_base);
+       of_node_put(np);
+
+       /* setup STI timer to run on 32.768 kHz and deassert reset */
+       emev2_smu_write(0, STI_CLKSEL);
+       emev2_smu_write(1, STI_RSTCTRL);
+
+       /* deassert reset for UART0->UART3 */
+       emev2_smu_write(2, USIAU0_RSTCTRL);
+       emev2_smu_write(2, USIBU1_RSTCTRL);
+       emev2_smu_write(2, USIBU2_RSTCTRL);
+       emev2_smu_write(2, USIBU3_RSTCTRL);
+}
+
+static void __init emev2_smu_clkdiv_init(struct device_node *np)
+{
+       u32 reg[2];
+       struct clk *clk;
+       const char *parent_name = of_clk_get_parent_name(np, 0);
+       if (WARN_ON(of_property_read_u32_array(np, "reg", reg, 2)))
+               return;
+       if (!smu_base)
+               emev2_smu_init();
+       clk = clk_register_divider(NULL, np->name, parent_name, 0,
+                                  smu_base + reg[0], reg[1], 8, 0, &lock);
+       of_clk_add_provider(np, of_clk_src_simple_get, clk);
+       clk_register_clkdev(clk, np->name, NULL);
+       pr_debug("## %s %s %p\n", __func__, np->name, clk);
+}
+CLK_OF_DECLARE(emev2_smu_clkdiv, "renesas,emev2-smu-clkdiv",
+               emev2_smu_clkdiv_init);
+
+static void __init emev2_smu_gclk_init(struct device_node *np)
+{
+       u32 reg[2];
+       struct clk *clk;
+       const char *parent_name = of_clk_get_parent_name(np, 0);
+       if (WARN_ON(of_property_read_u32_array(np, "reg", reg, 2)))
+               return;
+       if (!smu_base)
+               emev2_smu_init();
+       clk = clk_register_gate(NULL, np->name, parent_name, 0,
+                               smu_base + reg[0], reg[1], 0, &lock);
+       of_clk_add_provider(np, of_clk_src_simple_get, clk);
+       clk_register_clkdev(clk, np->name, NULL);
+       pr_debug("## %s %s %p\n", __func__, np->name, clk);
+}
+CLK_OF_DECLARE(emev2_smu_gclk, "renesas,emev2-smu-gclk", emev2_smu_gclk_init);