#include "devices.h"
#include "../../../drivers/input/touchscreen/xpt2046_cbn_ts.h"
+#ifdef CONFIG_BU92747GUW_CIR
+#include "../../../drivers/cir/bu92747guw_cir.h"
+#endif
#ifdef CONFIG_VIDEO_RK29
/*---------------- Camera Sensor Macro Define Begin ------------------------*/
/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
#include "../../../drivers/media/video/rk29_camera.c"
/*---------------- Camera Sensor Macro Define End ------------------------*/
+
/* Set memory size of pmem */
#ifdef CONFIG_RK29_MEM_SIZE_M
#define SDRAM_SIZE (CONFIG_RK29_MEM_SIZE_M * SZ_1M)
return ret;
}
+
static struct rk29fb_info rk29_fb_info = {
.fb_id = FB_ID,
.mcu_fmk_pin = FB_MCU_FMK_PIN,
#endif
+#if defined(CONFIG_RK_IRDA) || defined(CONFIG_BU92747GUW_CIR)
+#define BU92747GUW_RESET_PIN RK29_PIN3_PD4// INVALID_GPIO //
+#define BU92747GUW_RESET_MUX_NAME GPIO3D4_HOSTWRN_NAME//NULL //
+#define BU92747GUW_RESET_MUX_MODE GPIO3H_GPIO3D4//NULL //
+
+#define BU92747GUW_PWDN_PIN RK29_PIN3_PD3//RK29_PIN5_PA7 //
+#define BU92747GUW_PWDN_MUX_NAME GPIO3D3_HOSTRDN_NAME//GPIO5A7_HSADCDATA2_NAME //
+#define BU92747GUW_PWDN_MUX_MODE GPIO3H_GPIO3D3//GPIO5L_GPIO5A7 //
+
+static int bu92747guw_io_init(void)
+{
+ int ret;
+
+ //reset pin
+ if(BU92747GUW_RESET_MUX_NAME != NULL)
+ {
+ rk29_mux_api_set(BU92747GUW_RESET_MUX_NAME, BU92747GUW_RESET_MUX_MODE);
+ }
+ ret = gpio_request(BU92747GUW_RESET_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(BU92747GUW_RESET_PIN);
+ printk(">>>>>> BU92747GUW_RESET_PIN gpio_request err \n ");
+ }
+ gpio_direction_output(BU92747GUW_RESET_PIN, GPIO_HIGH);
+
+ //power down pin
+ if(BU92747GUW_PWDN_MUX_NAME != NULL)
+ {
+ rk29_mux_api_set(BU92747GUW_PWDN_MUX_NAME, BU92747GUW_PWDN_MUX_MODE);
+ }
+ ret = gpio_request(BU92747GUW_PWDN_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(BU92747GUW_PWDN_PIN);
+ printk(">>>>>> BU92747GUW_PWDN_PIN gpio_request err \n ");
+ }
+
+ //power down as default
+ gpio_direction_output(BU92747GUW_PWDN_PIN, GPIO_LOW);
+
+ return 0;
+}
+
+
+static int bu92747guw_io_deinit(void)
+{
+ gpio_free(BU92747GUW_PWDN_PIN);
+ gpio_free(BU92747GUW_RESET_PIN);
+ return 0;
+}
+
+//power ctl func is share with irda and remote
+static int nPowerOnCount = 0;
+static DEFINE_MUTEX(bu92747_power_mutex);
+
+//1---power on; 0---power off
+static int bu92747guw_power_ctl(int enable)
+{
+ printk("%s \n",__FUNCTION__);
+
+ mutex_lock(&bu92747_power_mutex);
+ if (enable) {
+ nPowerOnCount++;
+ if (nPowerOnCount == 1) {//power on first
+ //smc0_init(NULL);
+ gpio_set_value(BU92747GUW_PWDN_PIN, GPIO_HIGH);
+ gpio_set_value(BU92747GUW_RESET_PIN, GPIO_LOW);
+ mdelay(5);
+ gpio_set_value(BU92747GUW_RESET_PIN, GPIO_HIGH);
+ mdelay(5);
+ }
+ }
+ else {
+ nPowerOnCount--;
+ if (nPowerOnCount <= 0) {//power down final
+ nPowerOnCount = 0;
+ //smc0_exit();
+ gpio_set_value(BU92747GUW_PWDN_PIN, GPIO_LOW);
+ }
+ }
+ mutex_unlock(&bu92747_power_mutex);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_RK_IRDA
+#define IRDA_IRQ_PIN RK29_PIN5_PB2
+#define IRDA_IRQ_MUX_NAME GPIO5B2_HSADCDATA5_NAME
+#define IRDA_IRQ_MUX_MODE GPIO5L_GPIO5B2
+
+int irda_iomux_init(void)
+{
+ int ret = 0;
+
+ //irda irq pin
+ if(IRDA_IRQ_MUX_NAME != NULL)
+ {
+ rk29_mux_api_set(IRDA_IRQ_MUX_NAME, IRDA_IRQ_MUX_MODE);
+ }
+ ret = gpio_request(IRDA_IRQ_PIN, NULL);
+ if(ret != 0)
+ {
+ gpio_free(IRDA_IRQ_PIN);
+ printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
+ }
+ gpio_pull_updown(IRDA_IRQ_PIN, GPIO_HIGH);
+ gpio_direction_input(IRDA_IRQ_PIN);
+
+ return 0;
+}
+
+int irda_iomux_deinit(void)
+{
+ gpio_free(IRDA_IRQ_PIN);
+ return 0;
+}
+
+static struct irda_info rk29_irda_info = {
+ .intr_pin = IRDA_IRQ_PIN,
+ .iomux_init = irda_iomux_init,
+ .iomux_deinit = irda_iomux_deinit,
+ .irda_pwr_ctl = bu92747guw_power_ctl,
+};
+
+static struct platform_device irda_device = {
+#ifdef CONFIG_RK_IRDA_NET
+ .name = "rk_irda",
+#else
+ .name = "bu92747_irda",
+#endif
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_irda_info,
+ }
+};
+#endif
+
+#ifdef CONFIG_BU92747GUW_CIR
+#define BU92747_CIR_IRQ_PIN RK29_PIN5_PB0
+#define CIR_IRQ_PIN_IOMUX_NAME GPIO5B0_HSADCDATA3_NAME
+#define CIR_IRQ_PIN_IOMUX_VALUE GPIO5L_GPIO5B0
+static int cir_iomux_init(void)
+{
+ if (CIR_IRQ_PIN_IOMUX_NAME)
+ rk29_mux_api_set(CIR_IRQ_PIN_IOMUX_NAME, CIR_IRQ_PIN_IOMUX_VALUE);
+ rk29_mux_api_set(GPIO5A7_HSADCDATA2_NAME, GPIO5L_GPIO5A7);
+ return 0;
+}
+
+static struct bu92747guw_platform_data bu92747guw_pdata = {
+ .intr_pin = BU92747_CIR_IRQ_PIN,
+ .iomux_init = cir_iomux_init,
+ .iomux_deinit = NULL,
+ .cir_pwr_ctl = bu92747guw_power_ctl,
+};
+#endif
+#ifdef CONFIG_RK29_NEWTON
+struct rk29_newton_data rk29_newton_info = {
+};
+struct platform_device rk29_device_newton = {
+ .name = "rk29_newton",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_newton_info,
+ }
+ };
+#endif
+#if defined (CONFIG_TOUCHSCREEN_FT5406)
+#define TOUCH_RESET_PIN RK29_PIN6_PC3
+#define TOUCH_INT_PIN RK29_PIN0_PA2
+int ft5406_init_platform_hw(void)
+{
+ printk("ft5406_init_platform_hw\n");
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("ft5406_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("ift5406_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ mdelay(10);
+ gpio_direction_input(TOUCH_INT_PIN);
+ mdelay(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(300);
+ return 0;
+}
+
+void ft5406_exit_platform_hw(void)
+{
+ printk("ft5406_exit_platform_hw\n");
+ gpio_free(TOUCH_RESET_PIN);
+ gpio_free(TOUCH_INT_PIN);
+}
+
+int ft5406_platform_sleep(void)
+{
+ printk("ft5406_platform_sleep\n");
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ return 0;
+}
+
+int ft5406_platform_wakeup(void)
+{
+ printk("ft5406_platform_wakeup\n");
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(300);
+ return 0;
+}
+
+struct ft5406_platform_data ft5406_info = {
+
+ .init_platform_hw= ft5406_init_platform_hw,
+ .exit_platform_hw= ft5406_exit_platform_hw,
+ .platform_sleep = ft5406_platform_sleep,
+ .platform_wakeup = ft5406_platform_wakeup,
+
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_GT819)
+#define TOUCH_RESET_PIN RK29_PIN6_PC3
+#define TOUCH_INT_PIN RK29_PIN0_PA2
+int gt819_init_platform_hw(void)
+{
+ printk("gt819_init_platform_hw\n");
+ if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
+ gpio_free(TOUCH_RESET_PIN);
+ printk("gt819_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+
+ if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
+ gpio_free(TOUCH_INT_PIN);
+ printk("gt819_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_direction_output(TOUCH_RESET_PIN, 0);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ mdelay(10);
+// gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+// mdelay(10);
+// gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ gpio_direction_input(TOUCH_INT_PIN);
+// mdelay(10);
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ msleep(300);
+ return 0;
+}
+
+
+void gt819_exit_platform_hw(void)
+{
+ printk("gt819_exit_platform_hw\n");
+ gpio_free(TOUCH_RESET_PIN);
+ gpio_free(TOUCH_INT_PIN);
+}
+
+int gt819_platform_sleep(void)
+{
+ printk("gt819_platform_sleep\n");
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
+ return 0;
+}
+
+int gt819_platform_wakeup(void)
+{
+ printk("gt819_platform_wakeup\n");
+ gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
+ //msleep(5);
+ //gpio_set_value(TOUCH_INT_PIN, GPIO_LOW);
+ //msleep(20);
+ //gpio_set_value(TOUCH_INT_PIN, GPIO_HIGH);
+ return 0;
+}
+struct goodix_platform_data goodix_info = {
+
+ .init_platform_hw= gt819_init_platform_hw,
+ .exit_platform_hw= gt819_exit_platform_hw,
+ .platform_sleep = gt819_platform_sleep,
+ .platform_wakeup = gt819_platform_wakeup,
+
+};
+#endif
+
+
+#if defined (CONFIG_SND_SOC_CS42L52)
+
+int cs42l52_init_platform_hw()
+{
+ printk("cs42l52_init_platform_hw\n");
+ if(gpio_request(RK29_PIN6_PB6,NULL) != 0){
+ gpio_free(RK29_PIN6_PB6);
+ printk("cs42l52_init_platform_hw gpio_request error\n");
+ return -EIO;
+ }
+ gpio_direction_output(RK29_PIN6_PB6, 0);
+ gpio_set_value(RK29_PIN6_PB6,GPIO_HIGH);
+ return 0;
+}
+struct cs42l52_platform_data cs42l52_info = {
+
+ .init_platform_hw= cs42l52_init_platform_hw,
+
+};
+#endif
+#if defined (CONFIG_BATTERY_BQ27541)
+#define DC_CHECK_PIN RK29_PIN4_PA1
+#define LI_LION_BAT_NUM 1
+#define CHG_OK RK29_PIN4_PA3
+#define BAT_LOW RK29_PIN4_PA2
+
+static int bq27541_init_dc_check_pin(void){
+ if(gpio_request(DC_CHECK_PIN,"dc_check") != 0){
+ gpio_free(DC_CHECK_PIN);
+ printk("bq27541 init dc check pin request error\n");
+ return -EIO;
+ }
+ gpio_direction_input(DC_CHECK_PIN);
+ return 0;
+}
+
+struct bq27541_platform_data bq27541_info = {
+ .init_dc_check_pin = bq27541_init_dc_check_pin,
+ .dc_check_pin = DC_CHECK_PIN,
+ .bat_num = LI_LION_BAT_NUM,
+ .chgok_check_pin = CHG_OK,
+ .bat_check_pin = BAT_LOW,
+};
+#endif
static struct android_pmem_platform_data android_pmem_pdata = {
.name = "pmem",
.start = PMEM_UI_BASE,
.irq = RK29_PIN0_PA4,
},
#endif
+/*mpu3050*/
#if defined (CONFIG_MPU_SENSORS_MPU3050)
{
.type = "mpu3050",
.platform_data = &mpu3050_data,
},
#endif
+#if defined (CONFIG_SND_SOC_CS42L52)
+ {
+ .type = "cs42l52",
+ .addr = 0x4A,
+ .flags = 0,
+ .platform_data = &cs42l52_info,
+ },
+#endif
+#if defined (CONFIG_RTC_M41T66)
+ {
+ .type = "rtc-M41T66",
+ .addr = 0x68,
+ .flags = 0,
+ .irq = RK29_PIN0_PA1,
+ },
+#endif
};
#endif
#if defined (CONFIG_ANX7150)
-struct hdmi_platform_data anx7150_data = {
- //.io_init = anx7150_io_init,
+struct hdmi_platform_data anx7150_data = {
+ //.io_init = anx7150_io_init,
};
#endif
-
#ifdef CONFIG_I2C1_RK29
static struct i2c_board_info __initdata board_i2c1_devices[] = {
#if defined (CONFIG_RK1000_CONTROL1)
.platform_data = &anx7150_data,
},
#endif
+#ifdef CONFIG_BU92747GUW_CIR
+ {
+ .type ="bu92747_cir",
+ .addr = 0x77,
+ .flags =0,
+ .irq = BU92747_CIR_IRQ_PIN,
+ .platform_data = &bu92747guw_pdata,
+ },
+#endif
};
#endif
.platform_data = &eeti_egalax_info,
},
#endif
+#if defined (CONFIG_TOUCHSCREEN_GT819)
+ {
+ .type = "Goodix-TS",
+ .addr = 0x55,
+ .flags =0,
+ .irq =RK29_PIN0_PA2,
+ .platform_data = &goodix_info,
+ },
+#endif
+#if defined (CONFIG_TOUCHSCREEN_FT5406)
+ {
+ .type ="ft5x0x_ts",
+ .addr = 0x38, //0x70,
+ .flags =0,
+ .irq =RK29_PIN0_PA2, // support goodix tp detect, 20110706
+ .platform_data = &ft5406_info,
+ },
+#endif
};
#endif
#ifdef CONFIG_I2C3_RK29
static struct i2c_board_info __initdata board_i2c3_devices[] = {
+#if defined (CONFIG_BATTERY_BQ27541)
+ {
+ .type = "bq27541",
+ .addr = 0x55,
+ .flags = 0,
+ .platform_data = &bq27541_info,
+ },
+#endif
};
#endif
* camera devices
* author: ddl@rock-chips.com
*****************************************************************************************/
-#ifdef CONFIG_VIDEO_RK29
+#ifdef CONFIG_VIDEO_RK29
#define CONFIG_SENSOR_POWER_IOCTL_USR 0
#define CONFIG_SENSOR_RESET_IOCTL_USR 0
#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
.sensor_flash_cb = NULL,
#endif
};
-
#include "../../../drivers/media/video/rk29_camera.c"
#endif
/*****************************************************************************************
gpio_free(BL_EN_PIN);
#endif
rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
+
return ret;
}
};
#endif
-#if defined(CONFIG_RK_IRDA) || defined(CONFIG_BU92747GUW_CIR)
-#define BU92747GUW_RESET_PIN RK29_PIN3_PD4// INVALID_GPIO //
-#define BU92747GUW_RESET_MUX_NAME GPIO3D4_HOSTWRN_NAME//NULL //
-#define BU92747GUW_RESET_MUX_MODE GPIO3H_GPIO3D4//NULL //
-
-#define BU92747GUW_PWDN_PIN RK29_PIN3_PD3//RK29_PIN5_PA7 //
-#define BU92747GUW_PWDN_MUX_NAME GPIO3D3_HOSTRDN_NAME//GPIO5A7_HSADCDATA2_NAME //
-#define BU92747GUW_PWDN_MUX_MODE GPIO3H_GPIO3D3//GPIO5L_GPIO5A7 //
-
-static int bu92747guw_io_init(void)
-{
- int ret;
-
- //reset pin
- if(BU92747GUW_RESET_MUX_NAME != NULL)
- {
- rk29_mux_api_set(BU92747GUW_RESET_MUX_NAME, BU92747GUW_RESET_MUX_MODE);
- }
- ret = gpio_request(BU92747GUW_RESET_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(BU92747GUW_RESET_PIN);
- printk(">>>>>> BU92747GUW_RESET_PIN gpio_request err \n ");
- }
- gpio_direction_output(BU92747GUW_RESET_PIN, GPIO_HIGH);
-
- //power down pin
- if(BU92747GUW_PWDN_MUX_NAME != NULL)
- {
- rk29_mux_api_set(BU92747GUW_PWDN_MUX_NAME, BU92747GUW_PWDN_MUX_MODE);
- }
- ret = gpio_request(BU92747GUW_PWDN_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(BU92747GUW_PWDN_PIN);
- printk(">>>>>> BU92747GUW_PWDN_PIN gpio_request err \n ");
- }
-
- //power down as default
- gpio_direction_output(BU92747GUW_PWDN_PIN, GPIO_LOW);
-
- return 0;
-}
-
-
-static int bu92747guw_io_deinit(void)
-{
- gpio_free(BU92747GUW_PWDN_PIN);
- gpio_free(BU92747GUW_RESET_PIN);
- return 0;
-}
-
-//power ctl func is share with irda and remote
-static int nPowerOnCount = 0;
-static DEFINE_MUTEX(bu92747_power_mutex);
-
-//1---power on; 0---power off
-static int bu92747guw_power_ctl(int enable)
-{
- printk("%s \n",__FUNCTION__);
-
- mutex_lock(&bu92747_power_mutex);
- if (enable) {
- nPowerOnCount++;
- if (nPowerOnCount == 1) {//power on first
- //smc0_init(NULL);
- gpio_set_value(BU92747GUW_PWDN_PIN, GPIO_HIGH);
- gpio_set_value(BU92747GUW_RESET_PIN, GPIO_LOW);
- mdelay(5);
- gpio_set_value(BU92747GUW_RESET_PIN, GPIO_HIGH);
- mdelay(5);
- }
- }
- else {
- nPowerOnCount--;
- if (nPowerOnCount <= 0) {//power down final
- nPowerOnCount = 0;
- //smc0_exit();
- gpio_set_value(BU92747GUW_PWDN_PIN, GPIO_LOW);
- }
- }
- mutex_unlock(&bu92747_power_mutex);
- return 0;
-}
+#ifdef CONFIG_KEYS_RK29
+extern struct rk29_keys_platform_data rk29_keys_pdata;
+static struct platform_device rk29_device_keys = {
+ .name = "rk29-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_keys_pdata,
+ },
+};
#endif
-#ifdef CONFIG_RK_IRDA
-#define IRDA_IRQ_PIN RK29_PIN5_PB2
-#define IRDA_IRQ_MUX_NAME GPIO5B2_HSADCDATA5_NAME
-#define IRDA_IRQ_MUX_MODE GPIO5L_GPIO5B2
-
-int irda_iomux_init(void)
-{
- int ret = 0;
-
- //irda irq pin
- if(IRDA_IRQ_MUX_NAME != NULL)
- {
- rk29_mux_api_set(IRDA_IRQ_MUX_NAME, IRDA_IRQ_MUX_MODE);
- }
- ret = gpio_request(IRDA_IRQ_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(IRDA_IRQ_PIN);
- printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
- }
- gpio_pull_updown(IRDA_IRQ_PIN, GPIO_HIGH);
- gpio_direction_input(IRDA_IRQ_PIN);
-
- return 0;
-}
-
-int irda_iomux_deinit(void)
-{
- gpio_free(IRDA_IRQ_PIN);
- return 0;
-}
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+struct gpio_led rk29_leds[] = {
+ {
+ .name = "rk29_red_led",
+ .gpio = RK29_PIN4_PB2,
+ .default_trigger = "timer",
+ .active_low = 0,
+ .retain_state_suspended = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "rk29_green_led",
+ .gpio = RK29_PIN4_PB1,
+ .default_trigger = "timer",
+ .active_low = 0,
+ .retain_state_suspended = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "rk29_blue_led",
+ .gpio = RK29_PIN4_PB0,
+ .default_trigger = "timer",
+ .active_low = 0,
+ .retain_state_suspended = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+};
-static struct irda_info rk29_irda_info = {
- .intr_pin = IRDA_IRQ_PIN,
- .iomux_init = irda_iomux_init,
- .iomux_deinit = irda_iomux_deinit,
- .irda_pwr_ctl = bu92747guw_power_ctl,
+struct gpio_led_platform_data rk29_leds_pdata = {
+ .leds = &rk29_leds,
+ .num_leds = ARRAY_SIZE(rk29_leds),
};
-static struct platform_device irda_device = {
-#ifdef CONFIG_RK_IRDA_NET
- .name = "rk_irda",
-#else
- .name = "bu92747_irda",
-#endif
- .id = -1,
- .dev = {
- .platform_data = &rk29_irda_info,
- }
+struct platform_device rk29_device_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_leds_pdata,
+ },
};
#endif
+#ifdef CONFIG_LEDS_NEWTON_PWM
+static struct led_newton_pwm rk29_pwm_leds[] = {
+ {
+ .name = "power_led",
+ .pwm_id = 1,
+ .pwm_gpio = RK29_PIN5_PD2,
+ .pwm_iomux_name = GPIO5D2_PWM1_UART1SIRIN_NAME,
+ .pwm_iomux_pwm = GPIO5H_PWM1,
+ .pwm_iomux_gpio = GPIO5H_GPIO5D2,
+ .freq = 1000,
+ .period = 255,
+ },
+};
-#ifdef CONFIG_KEYS_RK29
-extern struct rk29_keys_platform_data rk29_keys_pdata;
-static struct platform_device rk29_device_keys = {
- .name = "rk29-keypad",
- .id = -1,
- .dev = {
- .platform_data = &rk29_keys_pdata,
+static struct led_newton_pwm_platform_data rk29_pwm_leds_pdata = {
+ .leds = &rk29_pwm_leds,
+ .num_leds = ARRAY_SIZE(rk29_pwm_leds),
+};
+
+static struct platform_device rk29_device_pwm_leds = {
+ .name = "leds_newton_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_pwm_leds_pdata,
},
};
-#endif
+#endif
static void __init rk29_board_iomux_init(void)
{
#ifdef CONFIG_RK29_PWM_REGULATOR
#ifdef CONFIG_KEYS_RK29
&rk29_device_keys,
#endif
+#ifdef CONFIG_KEYS_RK29_NEWTON
+ &rk29_device_keys,
+#endif
#ifdef CONFIG_SDMMC0_RK29
&rk29_device_sdmmc0,
#endif
#ifdef CONFIG_BACKLIGHT_RK29_BL
&rk29_device_backlight,
#endif
+#ifdef CONFIG_BACKLIGHT_RK29_NEWTON_BL
+ &rk29_device_backlight,
+#endif
#ifdef CONFIG_RK29_VMAC
&rk29_device_vmac,
#endif
&android_usb_device,
&usb_mass_storage_device,
#endif
+#ifdef CONFIG_USB_ANDROID_RNDIS
+ &rk29_device_rndis,
+#endif
#ifdef CONFIG_RK29_IPP
&rk29_device_ipp,
#endif
#ifdef CONFIG_VIDEO_RK29XX_VOUT
&rk29_v4l2_output_devce,
#endif
+#ifdef CONFIG_RK29_NEWTON
+ &rk29_device_newton,
+#endif
#ifdef CONFIG_RK_IRDA
- &irda_device,
+ &irda_device,
+#endif
+#ifdef CONFIG_LEDS_GPIO_PLATFORM
+ &rk29_device_gpio_leds,
+#endif
+#ifdef CONFIG_LEDS_NEWTON_PWM
+ &rk29_device_pwm_leds,
+#endif
+#ifdef CONFIG_SND_RK29_SOC_CS42L52
+ &rk29_cs42l52_device,
#endif
};
projects / firefly-linux-kernel-4.4.55.git / commitdiff