[media] mxl111sf-tuner: use DVBv5 parameters on set_params()
authorMauro Carvalho Chehab <mchehab@redhat.com>
Fri, 23 Dec 2011 21:55:51 +0000 (18:55 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Sat, 31 Dec 2011 10:37:51 +0000 (08:37 -0200)
Instead of using DVBv3 parameters, rely on DVBv5 parameters to
set the tuner

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb/dvb-usb/mxl111sf-tuner.c

index 3bfc6d8368a8e36a1d9da95c2e5e76e879021580..aeac7a9a80d65cfb90287ca8970da1baf1d0cfce 100644 (file)
@@ -275,52 +275,50 @@ static int mxl1x1sf_tuner_loop_thru_ctrl(struct mxl111sf_tuner_state *state,
 static int mxl111sf_tuner_set_params(struct dvb_frontend *fe,
                                     struct dvb_frontend_parameters *params)
 {
+       struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+       u32 delsys  = c->delivery_system;
        struct mxl111sf_tuner_state *state = fe->tuner_priv;
        int ret;
        u8 bw;
+       u32 band = BANDWIDTH_6_MHZ;
 
        mxl_dbg("()");
 
-       if (fe->ops.info.type == FE_ATSC) {
-               switch (params->u.vsb.modulation) {
-               case VSB_8:
-               case VSB_16:
-                       bw = 0; /* ATSC */
-                       break;
-               case QAM_64:
-               case QAM_256:
-                       bw = 1; /* US CABLE */
-                       break;
-               default:
-                       err("%s: modulation not set!", __func__);
-                       return -EINVAL;
-               }
-       } else if (fe->ops.info.type == FE_OFDM) {
-               switch (params->u.ofdm.bandwidth) {
-               case BANDWIDTH_6_MHZ:
+       switch (delsys) {
+       case SYS_ATSC:
+               bw = 0; /* ATSC */
+               break;
+       case SYS_DVBC_ANNEX_B:
+               bw = 1; /* US CABLE */
+               break;
+       case SYS_DVBT:
+               switch (c->bandwidth_hz) {
+               case 6000000:
                        bw = 6;
                        break;
-               case BANDWIDTH_7_MHZ:
+               case 7000000:
                        bw = 7;
+                       band = BANDWIDTH_7_MHZ;
                        break;
-               case BANDWIDTH_8_MHZ:
+               case 8000000:
                        bw = 8;
+                       band = BANDWIDTH_8_MHZ;
                        break;
                default:
                        err("%s: bandwidth not set!", __func__);
                        return -EINVAL;
                }
-       } else {
+               break;
+       default:
                err("%s: modulation type not supported!", __func__);
                return -EINVAL;
        }
-       ret = mxl1x1sf_tune_rf(fe, params->frequency, bw);
+       ret = mxl1x1sf_tune_rf(fe, c->frequency, bw);
        if (mxl_fail(ret))
                goto fail;
 
-       state->frequency = params->frequency;
-       state->bandwidth = (fe->ops.info.type == FE_OFDM) ?
-               params->u.ofdm.bandwidth : 0;
+       state->frequency = c->frequency;
+       state->bandwidth = band;
 fail:
        return ret;
 }