obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
--- /dev/null
+/*
+ * arch/arm/mach-imx/mach-mx1ads.c
+ *
+ * Initially based on:
+ * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
+ * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/irqs.h>
+
+#include "devices.h"
+
+static int mx1ads_pins[] = {
+ /* UART1 */
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+ /* UART2 */
+ PB28_PF_UART2_CTS,
+ PB29_PF_UART2_RTS,
+ PB30_PF_UART2_TXD,
+ PB31_PF_UART2_RXD,
+ /* I2C */
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+ /* SPI */
+ PC13_PF_SPI1_SPI_RDY,
+ PC14_PF_SPI1_SCLK,
+ PC15_PF_SPI1_SS,
+ PC16_PF_SPI1_MISO,
+ PC17_PF_SPI1_MOSI,
+};
+
+/*
+ * UARTs platform data
+ */
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+/*
+ * Physmap flash
+ */
+
+static struct physmap_flash_data mx1ads_flash_data = {
+ .width = 4, /* bankwidth in bytes */
+};
+
+static struct resource flash_resource = {
+ .start = IMX_CS0_PHYS,
+ .end = IMX_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * I2C
+ */
+static struct pcf857x_platform_data pcf857x_data[] = {
+ {
+ .gpio_base = 4 * 32,
+ }, {
+ .gpio_base = 4 * 32 + 16,
+ }
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf8575", 0x22),
+ .platform_data = &pcf857x_data[0],
+ }, {
+ I2C_BOARD_INFO("pcf8575", 0x24),
+ .platform_data = &pcf857x_data[1],
+ },
+};
+
+/*
+ * Board init
+ */
+static void __init mx1ads_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx1ads_pins,
+ ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
+ /* UART */
+ mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
+ mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+
+ /* Physmap flash */
+ mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+ /* I2C */
+ i2c_register_board_info(0, mx1ads_i2c_devices,
+ ARRAY_SIZE(mx1ads_i2c_devices));
+
+ mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+}
+
+static void __init mx1ads_timer_init(void)
+{
+ mx1_clocks_init(32000);
+}
+
+struct sys_timer mx1ads_timer = {
+ .init = mx1ads_timer_init,
+};
+
+MACHINE_START(MX1ADS, "Freescale MX1ADS")
+ /* Maintainer: Sascha Hauer, Pengutronix */
+ .phys_io = IMX_IO_PHYS,
+ .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx1_map_io,
+ .init_irq = mx1_init_irq,
+ .timer = &mx1ads_timer,
+ .init_machine = mx1ads_init,
+MACHINE_END
+
+MACHINE_START(MXLADS, "Freescale MXLADS")
+ .phys_io = IMX_IO_PHYS,
+ .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx1_map_io,
+ .init_irq = mx1_init_irq,
+ .timer = &mx1ads_timer,
+ .init_machine = mx1ads_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+ .start = IMX_CS0_PHYS,
+ .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+ .width = 2,
+};
+
+static struct platform_device scb_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &scb_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+ {
+ .name = "address area",
+ .start = IMX_CS5_PHYS,
+ .end = IMX_CS5_PHYS + 1,
+ .flags = IORESOURCE_MEM, /* address access */
+ }, {
+ .name = "data area",
+ .start = IMX_CS5_PHYS + 4,
+ .end = IMX_CS5_PHYS + 5,
+ .flags = IORESOURCE_MEM, /* data access */
+ }, {
+ .start = IRQ_GPIOC(3),
+ .end = IRQ_GPIOC(3),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device dm9000x_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000x_resources),
+ .resource = dm9000x_resources,
+ .dev = {
+ .platform_data = &dm9000_platdata,
+ }
+};
+
+static int mxc_uart1_pins[] = {
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+ mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins));
+ return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+ .init = uart1_mxc_init,
+ .exit = uart1_mxc_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &scb_flash_device,
+ &dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+ mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+ printk(KERN_INFO"Scb9328: Adding devices\n");
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+ mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+ .init = scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+ /* Sascha Hauer */
+ .phys_io = 0x00200000,
+ .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
+ .boot_params = 0x08000100,
+ .map_io = mx1_map_io,
+ .init_irq = mx1_init_irq,
+ .timer = &scb9328_timer,
+ .init_machine = scb9328_init,
+MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/irqs.h>
-
-#include "devices.h"
-
-static int mx1ads_pins[] = {
- /* UART1 */
- PC9_PF_UART1_CTS,
- PC10_PF_UART1_RTS,
- PC11_PF_UART1_TXD,
- PC12_PF_UART1_RXD,
- /* UART2 */
- PB28_PF_UART2_CTS,
- PB29_PF_UART2_RTS,
- PB30_PF_UART2_TXD,
- PB31_PF_UART2_RXD,
- /* I2C */
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
- /* SPI */
- PC13_PF_SPI1_SPI_RDY,
- PC14_PF_SPI1_SCLK,
- PC15_PF_SPI1_SS,
- PC16_PF_SPI1_MISO,
- PC17_PF_SPI1_MOSI,
-};
-
-/*
- * UARTs platform data
- */
-
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
-};
-
-/*
- * Physmap flash
- */
-
-static struct physmap_flash_data mx1ads_flash_data = {
- .width = 4, /* bankwidth in bytes */
-};
-
-static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
-/*
- * I2C
- */
-static struct pcf857x_platform_data pcf857x_data[] = {
- {
- .gpio_base = 4 * 32,
- }, {
- .gpio_base = 4 * 32 + 16,
- }
-};
-
-static struct imxi2c_platform_data mx1ads_i2c_data = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mx1ads_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8575", 0x22),
- .platform_data = &pcf857x_data[0],
- }, {
- I2C_BOARD_INFO("pcf8575", 0x24),
- .platform_data = &pcf857x_data[1],
- },
-};
-
-/*
- * Board init
- */
-static void __init mx1ads_init(void)
-{
- mxc_gpio_setup_multiple_pins(mx1ads_pins,
- ARRAY_SIZE(mx1ads_pins), "mx1ads");
-
- /* UART */
- mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
- mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
-
- /* Physmap flash */
- mxc_register_device(&flash_device, &mx1ads_flash_data);
-
- /* I2C */
- i2c_register_board_info(0, mx1ads_i2c_devices,
- ARRAY_SIZE(mx1ads_i2c_devices));
-
- mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-}
-
-static void __init mx1ads_timer_init(void)
-{
- mx1_clocks_init(32000);
-}
-
-struct sys_timer mx1ads_timer = {
- .init = mx1ads_timer_init,
-};
-
-MACHINE_START(MX1ADS, "Freescale MX1ADS")
- /* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx1_map_io,
- .init_irq = mx1_init_irq,
- .timer = &mx1ads_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
-
-MACHINE_START(MXLADS, "Freescale MXLADS")
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx1_map_io,
- .init_irq = mx1_init_irq,
- .timer = &mx1ads_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-mx1/scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-
-#include "devices.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
- .width = 2,
-};
-
-static struct platform_device scb_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &scb_flash_data,
- },
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
- {
- .name = "address area",
- .start = IMX_CS5_PHYS,
- .end = IMX_CS5_PHYS + 1,
- .flags = IORESOURCE_MEM, /* address access */
- }, {
- .name = "data area",
- .start = IMX_CS5_PHYS + 4,
- .end = IMX_CS5_PHYS + 5,
- .flags = IORESOURCE_MEM, /* data access */
- }, {
- .start = IRQ_GPIOC(3),
- .end = IRQ_GPIOC(3),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device dm9000x_device = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm9000x_resources),
- .resource = dm9000x_resources,
- .dev = {
- .platform_data = &dm9000_platdata,
- }
-};
-
-static int mxc_uart1_pins[] = {
- PC9_PF_UART1_CTS,
- PC10_PF_UART1_RTS,
- PC11_PF_UART1_TXD,
- PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static struct imxuart_platform_data uart_pdata = {
- .init = uart1_mxc_init,
- .exit = uart1_mxc_exit,
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
- &scb_flash_device,
- &dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
- mxc_register_device(&imx_uart1_device, &uart_pdata);
-
- printk(KERN_INFO"Scb9328: Adding devices\n");
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
- mx1_clocks_init(32000);
-}
-
-static struct sys_timer scb9328_timer = {
- .init = scb9328_timer_init,
-};
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
- /* Sascha Hauer */
- .phys_io = 0x00200000,
- .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
- .boot_params = 0x08000100,
- .map_io = mx1_map_io,
- .init_irq = mx1_init_irq,
- .timer = &scb9328_timer,
- .init_machine = scb9328_init,
-MACHINE_END
projects / firefly-linux-kernel-4.4.55.git / commitdiff