Revert "pseries/iommu: Remove DDW on kexec"
authorNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Fri, 10 Jan 2014 23:10:41 +0000 (15:10 -0800)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Wed, 15 Jan 2014 02:46:45 +0000 (13:46 +1100)
After reverting 25ebc45b93452d0bc60271f178237123c4b26808
("powerpc/pseries/iommu: remove default window before attempting DDW
manipulation"), we no longer remove the base window in enable_ddw.
Therefore, we no longer need to reset the DMA window state in
find_existing_ddw_windows(). We can instead go back to what was done
before, which simply reuses the previous configuration, if any. Further,
this removes the final caller of the reset-pe-dma-windows call, so
remove those functions.

This fixes an EEH on kdump with the ipr driver. The EEH occurs, because
the initcall removes the DDW configuration (64-bit DMA window), but
doesn't ensure the ops are via the IOMMU -- a DMA operation occurs
during probe (still investigating this) and we EEH.

This reverts commit 14b6f00f8a4fdec5ccd45a0710284de301a61628.

Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/platforms/pseries/iommu.c

index bb2e16c5ae27959b6269ecc901f2889ff93ed0f8..33b552ffbe576d4b452f31aa22af5b6a16a9cd0c 100644 (file)
@@ -787,68 +787,33 @@ static u64 find_existing_ddw(struct device_node *pdn)
        return dma_addr;
 }
 
-static void __restore_default_window(struct eeh_dev *edev,
-                                               u32 ddw_restore_token)
-{
-       u32 cfg_addr;
-       u64 buid;
-       int ret;
-
-       /*
-        * Get the config address and phb buid of the PE window.
-        * Rely on eeh to retrieve this for us.
-        * Retrieve them from the pci device, not the node with the
-        * dma-window property
-        */
-       cfg_addr = edev->config_addr;
-       if (edev->pe_config_addr)
-               cfg_addr = edev->pe_config_addr;
-       buid = edev->phb->buid;
-
-       do {
-               ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr,
-                                       BUID_HI(buid), BUID_LO(buid));
-       } while (rtas_busy_delay(ret));
-       pr_info("ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n",
-                ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret);
-}
-
 static int find_existing_ddw_windows(void)
 {
+       int len;
        struct device_node *pdn;
+       struct direct_window *window;
        const struct dynamic_dma_window_prop *direct64;
-       const u32 *ddw_extensions;
 
        if (!firmware_has_feature(FW_FEATURE_LPAR))
                return 0;
 
        for_each_node_with_property(pdn, DIRECT64_PROPNAME) {
-               direct64 = of_get_property(pdn, DIRECT64_PROPNAME, NULL);
+               direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len);
                if (!direct64)
                        continue;
 
-               /*
-                * We need to ensure the IOMMU table is active when we
-                * return from the IOMMU setup so that the common code
-                * can clear the table or find the holes. To that end,
-                * first, remove any existing DDW configuration.
-                */
-               remove_ddw(pdn);
+               window = kzalloc(sizeof(*window), GFP_KERNEL);
+               if (!window || len < sizeof(struct dynamic_dma_window_prop)) {
+                       kfree(window);
+                       remove_ddw(pdn);
+                       continue;
+               }
 
-               /*
-                * Second, if we are running on a new enough level of
-                * firmware where the restore API is present, use it to
-                * restore the 32-bit window, which was removed in
-                * create_ddw.
-                * If the API is not present, then create_ddw couldn't
-                * have removed the 32-bit window in the first place, so
-                * removing the DDW configuration should be sufficient.
-                */
-               ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions",
-                                                                       NULL);
-               if (ddw_extensions && ddw_extensions[0] > 0)
-                       __restore_default_window(of_node_to_eeh_dev(pdn),
-                                                       ddw_extensions[1]);
+               window->device = pdn;
+               window->prop = direct64;
+               spin_lock(&direct_window_list_lock);
+               list_add(&window->list, &direct_window_list);
+               spin_unlock(&direct_window_list_lock);
        }
 
        return 0;